summaryrefslogtreecommitdiffstats
path: root/drivers/mfd/stw481x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mfd/stw481x.c')
-rw-r--r--drivers/mfd/stw481x.c251
1 files changed, 251 insertions, 0 deletions
diff --git a/drivers/mfd/stw481x.c b/drivers/mfd/stw481x.c
new file mode 100644
index 000000000..7478f03cc
--- /dev/null
+++ b/drivers/mfd/stw481x.c
@@ -0,0 +1,251 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Core driver for STw4810/STw4811
+ *
+ * Copyright (C) 2013 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/stw481x.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+
+/*
+ * This driver can only access the non-USB portions of STw4811, the register
+ * range 0x00-0x10 dealing with USB is bound to the two special I2C pins used
+ * for USB control.
+ */
+
+/* Registers inside the power control address space */
+#define STW_PC_VCORE_SEL 0x05U
+#define STW_PC_VAUX_SEL 0x06U
+#define STW_PC_VPLL_SEL 0x07U
+
+/**
+ * stw481x_get_pctl_reg() - get a power control register
+ * @stw481x: handle to the stw481x chip
+ * @reg: power control register to fetch
+ *
+ * The power control registers is a set of one-time-programmable registers
+ * in its own register space, accessed by writing addess bits to these
+ * two registers: bits 7,6,5 of PCTL_REG_LO corresponds to the 3 LSBs of
+ * the address and bits 8,9 of PCTL_REG_HI corresponds to the 2 MSBs of
+ * the address, forming an address space of 5 bits, i.e. 32 registers
+ * 0x00 ... 0x1f can be obtained.
+ */
+static int stw481x_get_pctl_reg(struct stw481x *stw481x, u8 reg)
+{
+ u8 msb = (reg >> 3) & 0x03;
+ u8 lsb = (reg << 5) & 0xe0;
+ unsigned int val;
+ u8 vrfy;
+ int ret;
+
+ ret = regmap_write(stw481x->map, STW_PCTL_REG_HI, msb);
+ if (ret)
+ return ret;
+ ret = regmap_write(stw481x->map, STW_PCTL_REG_LO, lsb);
+ if (ret)
+ return ret;
+ ret = regmap_read(stw481x->map, STW_PCTL_REG_HI, &val);
+ if (ret)
+ return ret;
+ vrfy = (val & 0x03) << 3;
+ ret = regmap_read(stw481x->map, STW_PCTL_REG_LO, &val);
+ if (ret)
+ return ret;
+ vrfy |= ((val >> 5) & 0x07);
+ if (vrfy != reg)
+ return -EIO;
+ return (val >> 1) & 0x0f;
+}
+
+static int stw481x_startup(struct stw481x *stw481x)
+{
+ /* Voltages multiplied by 100 */
+ static const u8 vcore_val[] = {
+ 100, 105, 110, 115, 120, 122, 124, 126, 128,
+ 130, 132, 134, 136, 138, 140, 145
+ };
+ static const u8 vpll_val[] = { 105, 120, 130, 180 };
+ static const u8 vaux_val[] = { 15, 18, 25, 28 };
+ u8 vcore;
+ u8 vcore_slp;
+ u8 vpll;
+ u8 vaux;
+ bool vaux_en;
+ bool it_warn;
+ int ret;
+ unsigned int val;
+
+ ret = regmap_read(stw481x->map, STW_CONF1, &val);
+ if (ret)
+ return ret;
+ vaux_en = !!(val & STW_CONF1_PDN_VAUX);
+ it_warn = !!(val & STW_CONF1_IT_WARN);
+
+ dev_info(&stw481x->client->dev, "voltages %s\n",
+ (val & STW_CONF1_V_MONITORING) ? "OK" : "LOW");
+ dev_info(&stw481x->client->dev, "MMC level shifter %s\n",
+ (val & STW_CONF1_MMC_LS_STATUS) ? "high impedance" : "ON");
+ dev_info(&stw481x->client->dev, "VMMC: %s\n",
+ (val & STW_CONF1_PDN_VMMC) ? "ON" : "disabled");
+
+ dev_info(&stw481x->client->dev, "STw481x power control registers:\n");
+
+ ret = stw481x_get_pctl_reg(stw481x, STW_PC_VCORE_SEL);
+ if (ret < 0)
+ return ret;
+ vcore = ret & 0x0f;
+
+ ret = stw481x_get_pctl_reg(stw481x, STW_PC_VAUX_SEL);
+ if (ret < 0)
+ return ret;
+ vaux = (ret >> 2) & 3;
+ vpll = (ret >> 4) & 1; /* Save bit 4 */
+
+ ret = stw481x_get_pctl_reg(stw481x, STW_PC_VPLL_SEL);
+ if (ret < 0)
+ return ret;
+ vpll |= (ret >> 1) & 2;
+
+ dev_info(&stw481x->client->dev, "VCORE: %u.%uV %s\n",
+ vcore_val[vcore] / 100, vcore_val[vcore] % 100,
+ (ret & 4) ? "ON" : "OFF");
+
+ dev_info(&stw481x->client->dev, "VPLL: %u.%uV %s\n",
+ vpll_val[vpll] / 100, vpll_val[vpll] % 100,
+ (ret & 0x10) ? "ON" : "OFF");
+
+ dev_info(&stw481x->client->dev, "VAUX: %u.%uV %s\n",
+ vaux_val[vaux] / 10, vaux_val[vaux] % 10,
+ vaux_en ? "ON" : "OFF");
+
+ ret = regmap_read(stw481x->map, STW_CONF2, &val);
+ if (ret)
+ return ret;
+
+ dev_info(&stw481x->client->dev, "TWARN: %s threshold, %s\n",
+ it_warn ? "below" : "above",
+ (val & STW_CONF2_MASK_TWARN) ?
+ "enabled" : "mask through VDDOK");
+ dev_info(&stw481x->client->dev, "VMMC: %s\n",
+ (val & STW_CONF2_VMMC_EXT) ? "internal" : "external");
+ dev_info(&stw481x->client->dev, "IT WAKE UP: %s\n",
+ (val & STW_CONF2_MASK_IT_WAKE_UP) ? "enabled" : "masked");
+ dev_info(&stw481x->client->dev, "GPO1: %s\n",
+ (val & STW_CONF2_GPO1) ? "low" : "high impedance");
+ dev_info(&stw481x->client->dev, "GPO2: %s\n",
+ (val & STW_CONF2_GPO2) ? "low" : "high impedance");
+
+ ret = regmap_read(stw481x->map, STW_VCORE_SLEEP, &val);
+ if (ret)
+ return ret;
+ vcore_slp = val & 0x0f;
+ dev_info(&stw481x->client->dev, "VCORE SLEEP: %u.%uV\n",
+ vcore_val[vcore_slp] / 100, vcore_val[vcore_slp] % 100);
+
+ return 0;
+}
+
+/*
+ * MFD cells - we have one cell which is selected operation
+ * mode, and we always have a GPIO cell.
+ */
+static struct mfd_cell stw481x_cells[] = {
+ {
+ .of_compatible = "st,stw481x-vmmc",
+ .name = "stw481x-vmmc-regulator",
+ .id = -1,
+ },
+};
+
+static const struct regmap_config stw481x_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static int stw481x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct stw481x *stw481x;
+ int ret;
+ int i;
+
+ stw481x = devm_kzalloc(&client->dev, sizeof(*stw481x), GFP_KERNEL);
+ if (!stw481x)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, stw481x);
+ stw481x->client = client;
+ stw481x->map = devm_regmap_init_i2c(client, &stw481x_regmap_config);
+ if (IS_ERR(stw481x->map)) {
+ ret = PTR_ERR(stw481x->map);
+ dev_err(&client->dev, "Failed to allocate register map: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = stw481x_startup(stw481x);
+ if (ret) {
+ dev_err(&client->dev, "chip initialization failed\n");
+ return ret;
+ }
+
+ /* Set up and register the platform devices. */
+ for (i = 0; i < ARRAY_SIZE(stw481x_cells); i++) {
+ /* One state holder for all drivers, this is simple */
+ stw481x_cells[i].platform_data = stw481x;
+ stw481x_cells[i].pdata_size = sizeof(*stw481x);
+ }
+
+ ret = devm_mfd_add_devices(&client->dev, 0, stw481x_cells,
+ ARRAY_SIZE(stw481x_cells), NULL, 0, NULL);
+ if (ret)
+ return ret;
+
+ dev_info(&client->dev, "initialized STw481x device\n");
+
+ return ret;
+}
+
+/*
+ * This ID table is completely unused, as this is a pure
+ * device-tree probed driver, but it has to be here due to
+ * the structure of the I2C core.
+ */
+static const struct i2c_device_id stw481x_id[] = {
+ { "stw481x", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, stw481x_id);
+
+static const struct of_device_id stw481x_match[] = {
+ { .compatible = "st,stw4810", },
+ { .compatible = "st,stw4811", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, stw481x_match);
+
+static struct i2c_driver stw481x_driver = {
+ .driver = {
+ .name = "stw481x",
+ .of_match_table = stw481x_match,
+ },
+ .probe = stw481x_probe,
+ .id_table = stw481x_id,
+};
+
+module_i2c_driver(stw481x_driver);
+
+MODULE_AUTHOR("Linus Walleij");
+MODULE_DESCRIPTION("STw481x PMIC driver");
+MODULE_LICENSE("GPL v2");