summaryrefslogtreecommitdiffstats
path: root/drivers/mfd/tps65010.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/mfd/tps65010.c1061
1 files changed, 1061 insertions, 0 deletions
diff --git a/drivers/mfd/tps65010.c b/drivers/mfd/tps65010.c
new file mode 100644
index 000000000..c2afa2e69
--- /dev/null
+++ b/drivers/mfd/tps65010.c
@@ -0,0 +1,1061 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * tps65010 - driver for tps6501x power management chips
+ *
+ * Copyright (C) 2004 Texas Instruments
+ * Copyright (C) 2004-2005 David Brownell
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/tps65010.h>
+
+#include <linux/gpio/driver.h>
+
+
+/*-------------------------------------------------------------------------*/
+
+#define DRIVER_VERSION "2 May 2005"
+#define DRIVER_NAME (tps65010_driver.driver.name)
+
+MODULE_DESCRIPTION("TPS6501x Power Management Driver");
+MODULE_LICENSE("GPL");
+
+static struct i2c_driver tps65010_driver;
+
+/*-------------------------------------------------------------------------*/
+
+/* This driver handles a family of multipurpose chips, which incorporate
+ * voltage regulators, lithium ion/polymer battery charging, GPIOs, LEDs,
+ * and other features often needed in portable devices like cell phones
+ * or digital cameras.
+ *
+ * The tps65011 and tps65013 have different voltage settings compared
+ * to tps65010 and tps65012. The tps65013 has a NO_CHG status/irq.
+ * All except tps65010 have "wait" mode, possibly defaulted so that
+ * battery-insert != device-on.
+ *
+ * We could distinguish between some models by checking VDCDC1.UVLO or
+ * other registers, unless they've been changed already after powerup
+ * as part of board setup by a bootloader.
+ */
+enum tps_model {
+ TPS65010,
+ TPS65011,
+ TPS65012,
+ TPS65013,
+};
+
+struct tps65010 {
+ struct i2c_client *client;
+ struct mutex lock;
+ struct delayed_work work;
+ struct dentry *file;
+ unsigned charging:1;
+ unsigned por:1;
+ unsigned model:8;
+ u16 vbus;
+ unsigned long flags;
+#define FLAG_VBUS_CHANGED 0
+#define FLAG_IRQ_ENABLE 1
+
+ /* copies of last register state */
+ u8 chgstatus, regstatus, chgconf;
+ u8 nmask1, nmask2;
+
+ u8 outmask;
+ struct gpio_chip chip;
+ struct platform_device *leds;
+};
+
+#define POWER_POLL_DELAY msecs_to_jiffies(5000)
+
+/*-------------------------------------------------------------------------*/
+
+#if defined(DEBUG) || defined(CONFIG_DEBUG_FS)
+
+static void dbg_chgstat(char *buf, size_t len, u8 chgstatus)
+{
+ snprintf(buf, len, "%02x%s%s%s%s%s%s%s%s\n",
+ chgstatus,
+ (chgstatus & TPS_CHG_USB) ? " USB" : "",
+ (chgstatus & TPS_CHG_AC) ? " AC" : "",
+ (chgstatus & TPS_CHG_THERM) ? " therm" : "",
+ (chgstatus & TPS_CHG_TERM) ? " done" :
+ ((chgstatus & (TPS_CHG_USB|TPS_CHG_AC))
+ ? " (charging)" : ""),
+ (chgstatus & TPS_CHG_TAPER_TMO) ? " taper_tmo" : "",
+ (chgstatus & TPS_CHG_CHG_TMO) ? " charge_tmo" : "",
+ (chgstatus & TPS_CHG_PRECHG_TMO) ? " prechg_tmo" : "",
+ (chgstatus & TPS_CHG_TEMP_ERR) ? " temp_err" : "");
+}
+
+static void dbg_regstat(char *buf, size_t len, u8 regstatus)
+{
+ snprintf(buf, len, "%02x %s%s%s%s%s%s%s%s\n",
+ regstatus,
+ (regstatus & TPS_REG_ONOFF) ? "off" : "(on)",
+ (regstatus & TPS_REG_COVER) ? " uncover" : "",
+ (regstatus & TPS_REG_UVLO) ? " UVLO" : "",
+ (regstatus & TPS_REG_NO_CHG) ? " NO_CHG" : "",
+ (regstatus & TPS_REG_PG_LD02) ? " ld02_bad" : "",
+ (regstatus & TPS_REG_PG_LD01) ? " ld01_bad" : "",
+ (regstatus & TPS_REG_PG_MAIN) ? " main_bad" : "",
+ (regstatus & TPS_REG_PG_CORE) ? " core_bad" : "");
+}
+
+static void dbg_chgconf(int por, char *buf, size_t len, u8 chgconfig)
+{
+ const char *hibit;
+
+ if (por)
+ hibit = (chgconfig & TPS_CHARGE_POR)
+ ? "POR=69ms" : "POR=1sec";
+ else
+ hibit = (chgconfig & TPS65013_AUA) ? "AUA" : "";
+
+ snprintf(buf, len, "%02x %s%s%s AC=%d%% USB=%dmA %sCharge\n",
+ chgconfig, hibit,
+ (chgconfig & TPS_CHARGE_RESET) ? " reset" : "",
+ (chgconfig & TPS_CHARGE_FAST) ? " fast" : "",
+ ({int p; switch ((chgconfig >> 3) & 3) {
+ case 3: p = 100; break;
+ case 2: p = 75; break;
+ case 1: p = 50; break;
+ default: p = 25; break;
+ }; p; }),
+ (chgconfig & TPS_VBUS_CHARGING)
+ ? ((chgconfig & TPS_VBUS_500MA) ? 500 : 100)
+ : 0,
+ (chgconfig & TPS_CHARGE_ENABLE) ? "" : "No");
+}
+
+#endif
+
+#ifdef DEBUG
+
+static void show_chgstatus(const char *label, u8 chgstatus)
+{
+ char buf [100];
+
+ dbg_chgstat(buf, sizeof buf, chgstatus);
+ pr_debug("%s: %s %s", DRIVER_NAME, label, buf);
+}
+
+static void show_regstatus(const char *label, u8 regstatus)
+{
+ char buf [100];
+
+ dbg_regstat(buf, sizeof buf, regstatus);
+ pr_debug("%s: %s %s", DRIVER_NAME, label, buf);
+}
+
+static void show_chgconfig(int por, const char *label, u8 chgconfig)
+{
+ char buf [100];
+
+ dbg_chgconf(por, buf, sizeof buf, chgconfig);
+ pr_debug("%s: %s %s", DRIVER_NAME, label, buf);
+}
+
+#else
+
+static inline void show_chgstatus(const char *label, u8 chgstatus) { }
+static inline void show_regstatus(const char *label, u8 chgstatus) { }
+static inline void show_chgconfig(int por, const char *label, u8 chgconfig) { }
+
+#endif
+
+#ifdef CONFIG_DEBUG_FS
+
+static int dbg_show(struct seq_file *s, void *_)
+{
+ struct tps65010 *tps = s->private;
+ u8 value, v2;
+ unsigned i;
+ char buf[100];
+ const char *chip;
+
+ switch (tps->model) {
+ case TPS65010: chip = "tps65010"; break;
+ case TPS65011: chip = "tps65011"; break;
+ case TPS65012: chip = "tps65012"; break;
+ case TPS65013: chip = "tps65013"; break;
+ default: chip = NULL; break;
+ }
+ seq_printf(s, "driver %s\nversion %s\nchip %s\n\n",
+ DRIVER_NAME, DRIVER_VERSION, chip);
+
+ mutex_lock(&tps->lock);
+
+ /* FIXME how can we tell whether a battery is present?
+ * likely involves a charge gauging chip (like BQ26501).
+ */
+
+ seq_printf(s, "%scharging\n\n", tps->charging ? "" : "(not) ");
+
+
+ /* registers for monitoring battery charging and status; note
+ * that reading chgstat and regstat may ack IRQs...
+ */
+ value = i2c_smbus_read_byte_data(tps->client, TPS_CHGCONFIG);
+ dbg_chgconf(tps->por, buf, sizeof buf, value);
+ seq_printf(s, "chgconfig %s", buf);
+
+ value = i2c_smbus_read_byte_data(tps->client, TPS_CHGSTATUS);
+ dbg_chgstat(buf, sizeof buf, value);
+ seq_printf(s, "chgstat %s", buf);
+ value = i2c_smbus_read_byte_data(tps->client, TPS_MASK1);
+ dbg_chgstat(buf, sizeof buf, value);
+ seq_printf(s, "mask1 %s", buf);
+ /* ignore ackint1 */
+
+ value = i2c_smbus_read_byte_data(tps->client, TPS_REGSTATUS);
+ dbg_regstat(buf, sizeof buf, value);
+ seq_printf(s, "regstat %s", buf);
+ value = i2c_smbus_read_byte_data(tps->client, TPS_MASK2);
+ dbg_regstat(buf, sizeof buf, value);
+ seq_printf(s, "mask2 %s\n", buf);
+ /* ignore ackint2 */
+
+ queue_delayed_work(system_power_efficient_wq, &tps->work,
+ POWER_POLL_DELAY);
+
+ /* VMAIN voltage, enable lowpower, etc */
+ value = i2c_smbus_read_byte_data(tps->client, TPS_VDCDC1);
+ seq_printf(s, "vdcdc1 %02x\n", value);
+
+ /* VCORE voltage, vibrator on/off */
+ value = i2c_smbus_read_byte_data(tps->client, TPS_VDCDC2);
+ seq_printf(s, "vdcdc2 %02x\n", value);
+
+ /* both LD0s, and their lowpower behavior */
+ value = i2c_smbus_read_byte_data(tps->client, TPS_VREGS1);
+ seq_printf(s, "vregs1 %02x\n\n", value);
+
+
+ /* LEDs and GPIOs */
+ value = i2c_smbus_read_byte_data(tps->client, TPS_LED1_ON);
+ v2 = i2c_smbus_read_byte_data(tps->client, TPS_LED1_PER);
+ seq_printf(s, "led1 %s, on=%02x, per=%02x, %d/%d msec\n",
+ (value & 0x80)
+ ? ((v2 & 0x80) ? "on" : "off")
+ : ((v2 & 0x80) ? "blink" : "(nPG)"),
+ value, v2,
+ (value & 0x7f) * 10, (v2 & 0x7f) * 100);
+
+ value = i2c_smbus_read_byte_data(tps->client, TPS_LED2_ON);
+ v2 = i2c_smbus_read_byte_data(tps->client, TPS_LED2_PER);
+ seq_printf(s, "led2 %s, on=%02x, per=%02x, %d/%d msec\n",
+ (value & 0x80)
+ ? ((v2 & 0x80) ? "on" : "off")
+ : ((v2 & 0x80) ? "blink" : "off"),
+ value, v2,
+ (value & 0x7f) * 10, (v2 & 0x7f) * 100);
+
+ value = i2c_smbus_read_byte_data(tps->client, TPS_DEFGPIO);
+ v2 = i2c_smbus_read_byte_data(tps->client, TPS_MASK3);
+ seq_printf(s, "defgpio %02x mask3 %02x\n", value, v2);
+
+ for (i = 0; i < 4; i++) {
+ if (value & (1 << (4 + i)))
+ seq_printf(s, " gpio%d-out %s\n", i + 1,
+ (value & (1 << i)) ? "low" : "hi ");
+ else
+ seq_printf(s, " gpio%d-in %s %s %s\n", i + 1,
+ (value & (1 << i)) ? "hi " : "low",
+ (v2 & (1 << i)) ? "no-irq" : "irq",
+ (v2 & (1 << (4 + i))) ? "rising" : "falling");
+ }
+
+ mutex_unlock(&tps->lock);
+ return 0;
+}
+
+static int dbg_tps_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, dbg_show, inode->i_private);
+}
+
+static const struct file_operations debug_fops = {
+ .open = dbg_tps_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+#define DEBUG_FOPS &debug_fops
+
+#else
+#define DEBUG_FOPS NULL
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/* handle IRQS in a task context, so we can use I2C calls */
+static void tps65010_interrupt(struct tps65010 *tps)
+{
+ u8 tmp = 0, mask, poll;
+
+ /* IRQs won't trigger for certain events, but we can get
+ * others by polling (normally, with external power applied).
+ */
+ poll = 0;
+
+ /* regstatus irqs */
+ if (tps->nmask2) {
+ tmp = i2c_smbus_read_byte_data(tps->client, TPS_REGSTATUS);
+ mask = tmp ^ tps->regstatus;
+ tps->regstatus = tmp;
+ mask &= tps->nmask2;
+ } else
+ mask = 0;
+ if (mask) {
+ tps->regstatus = tmp;
+ /* may need to shut something down ... */
+
+ /* "off" usually means deep sleep */
+ if (tmp & TPS_REG_ONOFF) {
+ pr_info("%s: power off button\n", DRIVER_NAME);
+#if 0
+ /* REVISIT: this might need its own workqueue
+ * plus tweaks including deadlock avoidance ...
+ * also needs to get error handling and probably
+ * an #ifdef CONFIG_HIBERNATION
+ */
+ hibernate();
+#endif
+ poll = 1;
+ }
+ }
+
+ /* chgstatus irqs */
+ if (tps->nmask1) {
+ tmp = i2c_smbus_read_byte_data(tps->client, TPS_CHGSTATUS);
+ mask = tmp ^ tps->chgstatus;
+ tps->chgstatus = tmp;
+ mask &= tps->nmask1;
+ } else
+ mask = 0;
+ if (mask) {
+ unsigned charging = 0;
+
+ show_chgstatus("chg/irq", tmp);
+ if (tmp & (TPS_CHG_USB|TPS_CHG_AC))
+ show_chgconfig(tps->por, "conf", tps->chgconf);
+
+ /* Unless it was turned off or disabled, we charge any
+ * battery whenever there's power available for it
+ * and the charger hasn't been disabled.
+ */
+ if (!(tps->chgstatus & ~(TPS_CHG_USB|TPS_CHG_AC))
+ && (tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC))
+ && (tps->chgconf & TPS_CHARGE_ENABLE)
+ ) {
+ if (tps->chgstatus & TPS_CHG_USB) {
+ /* VBUS options are readonly until reconnect */
+ if (mask & TPS_CHG_USB)
+ set_bit(FLAG_VBUS_CHANGED, &tps->flags);
+ charging = 1;
+ } else if (tps->chgstatus & TPS_CHG_AC)
+ charging = 1;
+ }
+ if (charging != tps->charging) {
+ tps->charging = charging;
+ pr_info("%s: battery %scharging\n",
+ DRIVER_NAME, charging ? "" :
+ ((tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC))
+ ? "NOT " : "dis"));
+ }
+ }
+
+ /* always poll to detect (a) power removal, without tps65013
+ * NO_CHG IRQ; or (b) restart of charging after stop.
+ */
+ if ((tps->model != TPS65013 || !tps->charging)
+ && (tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC)))
+ poll = 1;
+ if (poll)
+ queue_delayed_work(system_power_efficient_wq, &tps->work,
+ POWER_POLL_DELAY);
+
+ /* also potentially gpio-in rise or fall */
+}
+
+/* handle IRQs and polling using keventd for now */
+static void tps65010_work(struct work_struct *work)
+{
+ struct tps65010 *tps;
+
+ tps = container_of(to_delayed_work(work), struct tps65010, work);
+ mutex_lock(&tps->lock);
+
+ tps65010_interrupt(tps);
+
+ if (test_and_clear_bit(FLAG_VBUS_CHANGED, &tps->flags)) {
+ u8 chgconfig, tmp;
+
+ chgconfig = i2c_smbus_read_byte_data(tps->client,
+ TPS_CHGCONFIG);
+ chgconfig &= ~(TPS_VBUS_500MA | TPS_VBUS_CHARGING);
+ if (tps->vbus == 500)
+ chgconfig |= TPS_VBUS_500MA | TPS_VBUS_CHARGING;
+ else if (tps->vbus >= 100)
+ chgconfig |= TPS_VBUS_CHARGING;
+
+ i2c_smbus_write_byte_data(tps->client,
+ TPS_CHGCONFIG, chgconfig);
+
+ /* vbus update fails unless VBUS is connected! */
+ tmp = i2c_smbus_read_byte_data(tps->client, TPS_CHGCONFIG);
+ tps->chgconf = tmp;
+ show_chgconfig(tps->por, "update vbus", tmp);
+ }
+
+ if (test_and_clear_bit(FLAG_IRQ_ENABLE, &tps->flags))
+ enable_irq(tps->client->irq);
+
+ mutex_unlock(&tps->lock);
+}
+
+static irqreturn_t tps65010_irq(int irq, void *_tps)
+{
+ struct tps65010 *tps = _tps;
+
+ disable_irq_nosync(irq);
+ set_bit(FLAG_IRQ_ENABLE, &tps->flags);
+ queue_delayed_work(system_power_efficient_wq, &tps->work, 0);
+ return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* offsets 0..3 == GPIO1..GPIO4
+ * offsets 4..5 == LED1/nPG, LED2 (we set one of the non-BLINK modes)
+ * offset 6 == vibrator motor driver
+ */
+static void
+tps65010_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ if (offset < 4)
+ tps65010_set_gpio_out_value(offset + 1, value);
+ else if (offset < 6)
+ tps65010_set_led(offset - 3, value ? ON : OFF);
+ else
+ tps65010_set_vib(value);
+}
+
+static int
+tps65010_output(struct gpio_chip *chip, unsigned offset, int value)
+{
+ /* GPIOs may be input-only */
+ if (offset < 4) {
+ struct tps65010 *tps;
+
+ tps = gpiochip_get_data(chip);
+ if (!(tps->outmask & (1 << offset)))
+ return -EINVAL;
+ tps65010_set_gpio_out_value(offset + 1, value);
+ } else if (offset < 6)
+ tps65010_set_led(offset - 3, value ? ON : OFF);
+ else
+ tps65010_set_vib(value);
+
+ return 0;
+}
+
+static int tps65010_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ int value;
+ struct tps65010 *tps;
+
+ tps = gpiochip_get_data(chip);
+
+ if (offset < 4) {
+ value = i2c_smbus_read_byte_data(tps->client, TPS_DEFGPIO);
+ if (value < 0)
+ return value;
+ if (value & (1 << (offset + 4))) /* output */
+ return !(value & (1 << offset));
+ else /* input */
+ return !!(value & (1 << offset));
+ }
+
+ /* REVISIT we *could* report LED1/nPG and LED2 state ... */
+ return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static struct tps65010 *the_tps;
+
+static void tps65010_remove(struct i2c_client *client)
+{
+ struct tps65010 *tps = i2c_get_clientdata(client);
+ struct tps65010_board *board = dev_get_platdata(&client->dev);
+
+ if (board && board->teardown) {
+ int status = board->teardown(client, board->context);
+ if (status < 0)
+ dev_dbg(&client->dev, "board %s %s err %d\n",
+ "teardown", client->name, status);
+ }
+ if (client->irq > 0)
+ free_irq(client->irq, tps);
+ cancel_delayed_work_sync(&tps->work);
+ debugfs_remove(tps->file);
+ the_tps = NULL;
+}
+
+static int tps65010_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct tps65010 *tps;
+ int status;
+ struct tps65010_board *board = dev_get_platdata(&client->dev);
+
+ if (the_tps) {
+ dev_dbg(&client->dev, "only one tps6501x chip allowed\n");
+ return -ENODEV;
+ }
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -EINVAL;
+
+ tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
+ if (!tps)
+ return -ENOMEM;
+
+ mutex_init(&tps->lock);
+ INIT_DELAYED_WORK(&tps->work, tps65010_work);
+ tps->client = client;
+ tps->model = id->driver_data;
+
+ /* the IRQ is active low, but many gpio lines can't support that
+ * so this driver uses falling-edge triggers instead.
+ */
+ if (client->irq > 0) {
+ status = request_irq(client->irq, tps65010_irq,
+ IRQF_TRIGGER_FALLING, DRIVER_NAME, tps);
+ if (status < 0) {
+ dev_dbg(&client->dev, "can't get IRQ %d, err %d\n",
+ client->irq, status);
+ return status;
+ }
+ /* annoying race here, ideally we'd have an option
+ * to claim the irq now and enable it later.
+ * FIXME genirq IRQF_NOAUTOEN now solves that ...
+ */
+ disable_irq(client->irq);
+ set_bit(FLAG_IRQ_ENABLE, &tps->flags);
+ } else
+ dev_warn(&client->dev, "IRQ not configured!\n");
+
+
+ switch (tps->model) {
+ case TPS65010:
+ case TPS65012:
+ tps->por = 1;
+ break;
+ /* else CHGCONFIG.POR is replaced by AUA, enabling a WAIT mode */
+ }
+ tps->chgconf = i2c_smbus_read_byte_data(client, TPS_CHGCONFIG);
+ show_chgconfig(tps->por, "conf/init", tps->chgconf);
+
+ show_chgstatus("chg/init",
+ i2c_smbus_read_byte_data(client, TPS_CHGSTATUS));
+ show_regstatus("reg/init",
+ i2c_smbus_read_byte_data(client, TPS_REGSTATUS));
+
+ pr_debug("%s: vdcdc1 0x%02x, vdcdc2 %02x, vregs1 %02x\n", DRIVER_NAME,
+ i2c_smbus_read_byte_data(client, TPS_VDCDC1),
+ i2c_smbus_read_byte_data(client, TPS_VDCDC2),
+ i2c_smbus_read_byte_data(client, TPS_VREGS1));
+ pr_debug("%s: defgpio 0x%02x, mask3 0x%02x\n", DRIVER_NAME,
+ i2c_smbus_read_byte_data(client, TPS_DEFGPIO),
+ i2c_smbus_read_byte_data(client, TPS_MASK3));
+
+ i2c_set_clientdata(client, tps);
+ the_tps = tps;
+
+#if defined(CONFIG_USB_GADGET) && !defined(CONFIG_USB_OTG)
+ /* USB hosts can't draw VBUS. OTG devices could, later
+ * when OTG infrastructure enables it. USB peripherals
+ * could be relying on VBUS while booting, though.
+ */
+ tps->vbus = 100;
+#endif
+
+ /* unmask the "interesting" irqs, then poll once to
+ * kickstart monitoring, initialize shadowed status
+ * registers, and maybe disable VBUS draw.
+ */
+ tps->nmask1 = ~0;
+ (void) i2c_smbus_write_byte_data(client, TPS_MASK1, ~tps->nmask1);
+
+ tps->nmask2 = TPS_REG_ONOFF;
+ if (tps->model == TPS65013)
+ tps->nmask2 |= TPS_REG_NO_CHG;
+ (void) i2c_smbus_write_byte_data(client, TPS_MASK2, ~tps->nmask2);
+
+ (void) i2c_smbus_write_byte_data(client, TPS_MASK3, 0x0f
+ | i2c_smbus_read_byte_data(client, TPS_MASK3));
+
+ tps65010_work(&tps->work.work);
+
+ tps->file = debugfs_create_file(DRIVER_NAME, S_IRUGO, NULL,
+ tps, DEBUG_FOPS);
+
+ /* optionally register GPIOs */
+ if (board && board->base != 0) {
+ tps->outmask = board->outmask;
+
+ tps->chip.label = client->name;
+ tps->chip.parent = &client->dev;
+ tps->chip.owner = THIS_MODULE;
+
+ tps->chip.set = tps65010_gpio_set;
+ tps->chip.direction_output = tps65010_output;
+
+ /* NOTE: only partial support for inputs; nyet IRQs */
+ tps->chip.get = tps65010_gpio_get;
+
+ tps->chip.base = board->base;
+ tps->chip.ngpio = 7;
+ tps->chip.can_sleep = 1;
+
+ status = gpiochip_add_data(&tps->chip, tps);
+ if (status < 0)
+ dev_err(&client->dev, "can't add gpiochip, err %d\n",
+ status);
+ else if (board->setup) {
+ status = board->setup(client, board->context);
+ if (status < 0) {
+ dev_dbg(&client->dev,
+ "board %s %s err %d\n",
+ "setup", client->name, status);
+ status = 0;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static const struct i2c_device_id tps65010_id[] = {
+ { "tps65010", TPS65010 },
+ { "tps65011", TPS65011 },
+ { "tps65012", TPS65012 },
+ { "tps65013", TPS65013 },
+ { "tps65014", TPS65011 }, /* tps65011 charging at 6.5V max */
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tps65010_id);
+
+static struct i2c_driver tps65010_driver = {
+ .driver = {
+ .name = "tps65010",
+ },
+ .probe = tps65010_probe,
+ .remove = tps65010_remove,
+ .id_table = tps65010_id,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* Draw from VBUS:
+ * 0 mA -- DON'T DRAW (might supply power instead)
+ * 100 mA -- usb unit load (slowest charge rate)
+ * 500 mA -- usb high power (fast battery charge)
+ */
+int tps65010_set_vbus_draw(unsigned mA)
+{
+ unsigned long flags;
+
+ if (!the_tps)
+ return -ENODEV;
+
+ /* assumes non-SMP */
+ local_irq_save(flags);
+ if (mA >= 500)
+ mA = 500;
+ else if (mA >= 100)
+ mA = 100;
+ else
+ mA = 0;
+ the_tps->vbus = mA;
+ if ((the_tps->chgstatus & TPS_CHG_USB)
+ && test_and_set_bit(
+ FLAG_VBUS_CHANGED, &the_tps->flags)) {
+ /* gadget drivers call this in_irq() */
+ queue_delayed_work(system_power_efficient_wq, &the_tps->work,
+ 0);
+ }
+ local_irq_restore(flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(tps65010_set_vbus_draw);
+
+/*-------------------------------------------------------------------------*/
+/* tps65010_set_gpio_out_value parameter:
+ * gpio: GPIO1, GPIO2, GPIO3 or GPIO4
+ * value: LOW or HIGH
+ */
+int tps65010_set_gpio_out_value(unsigned gpio, unsigned value)
+{
+ int status;
+ unsigned defgpio;
+
+ if (!the_tps)
+ return -ENODEV;
+ if ((gpio < GPIO1) || (gpio > GPIO4))
+ return -EINVAL;
+
+ mutex_lock(&the_tps->lock);
+
+ defgpio = i2c_smbus_read_byte_data(the_tps->client, TPS_DEFGPIO);
+
+ /* Configure GPIO for output */
+ defgpio |= 1 << (gpio + 3);
+
+ /* Writing 1 forces a logic 0 on that GPIO and vice versa */
+ switch (value) {
+ case LOW:
+ defgpio |= 1 << (gpio - 1); /* set GPIO low by writing 1 */
+ break;
+ /* case HIGH: */
+ default:
+ defgpio &= ~(1 << (gpio - 1)); /* set GPIO high by writing 0 */
+ break;
+ }
+
+ status = i2c_smbus_write_byte_data(the_tps->client,
+ TPS_DEFGPIO, defgpio);
+
+ pr_debug("%s: gpio%dout = %s, defgpio 0x%02x\n", DRIVER_NAME,
+ gpio, value ? "high" : "low",
+ i2c_smbus_read_byte_data(the_tps->client, TPS_DEFGPIO));
+
+ mutex_unlock(&the_tps->lock);
+ return status;
+}
+EXPORT_SYMBOL(tps65010_set_gpio_out_value);
+
+/*-------------------------------------------------------------------------*/
+/* tps65010_set_led parameter:
+ * led: LED1 or LED2
+ * mode: ON, OFF or BLINK
+ */
+int tps65010_set_led(unsigned led, unsigned mode)
+{
+ int status;
+ unsigned led_on, led_per, offs;
+
+ if (!the_tps)
+ return -ENODEV;
+
+ if (led == LED1)
+ offs = 0;
+ else {
+ offs = 2;
+ led = LED2;
+ }
+
+ mutex_lock(&the_tps->lock);
+
+ pr_debug("%s: led%i_on 0x%02x\n", DRIVER_NAME, led,
+ i2c_smbus_read_byte_data(the_tps->client,
+ TPS_LED1_ON + offs));
+
+ pr_debug("%s: led%i_per 0x%02x\n", DRIVER_NAME, led,
+ i2c_smbus_read_byte_data(the_tps->client,
+ TPS_LED1_PER + offs));
+
+ switch (mode) {
+ case OFF:
+ led_on = 1 << 7;
+ led_per = 0 << 7;
+ break;
+ case ON:
+ led_on = 1 << 7;
+ led_per = 1 << 7;
+ break;
+ case BLINK:
+ led_on = 0x30 | (0 << 7);
+ led_per = 0x08 | (1 << 7);
+ break;
+ default:
+ printk(KERN_ERR "%s: Wrong mode parameter for set_led()\n",
+ DRIVER_NAME);
+ mutex_unlock(&the_tps->lock);
+ return -EINVAL;
+ }
+
+ status = i2c_smbus_write_byte_data(the_tps->client,
+ TPS_LED1_ON + offs, led_on);
+
+ if (status != 0) {
+ printk(KERN_ERR "%s: Failed to write led%i_on register\n",
+ DRIVER_NAME, led);
+ mutex_unlock(&the_tps->lock);
+ return status;
+ }
+
+ pr_debug("%s: led%i_on 0x%02x\n", DRIVER_NAME, led,
+ i2c_smbus_read_byte_data(the_tps->client, TPS_LED1_ON + offs));
+
+ status = i2c_smbus_write_byte_data(the_tps->client,
+ TPS_LED1_PER + offs, led_per);
+
+ if (status != 0) {
+ printk(KERN_ERR "%s: Failed to write led%i_per register\n",
+ DRIVER_NAME, led);
+ mutex_unlock(&the_tps->lock);
+ return status;
+ }
+
+ pr_debug("%s: led%i_per 0x%02x\n", DRIVER_NAME, led,
+ i2c_smbus_read_byte_data(the_tps->client,
+ TPS_LED1_PER + offs));
+
+ mutex_unlock(&the_tps->lock);
+
+ return status;
+}
+EXPORT_SYMBOL(tps65010_set_led);
+
+/*-------------------------------------------------------------------------*/
+/* tps65010_set_vib parameter:
+ * value: ON or OFF
+ */
+int tps65010_set_vib(unsigned value)
+{
+ int status;
+ unsigned vdcdc2;
+
+ if (!the_tps)
+ return -ENODEV;
+
+ mutex_lock(&the_tps->lock);
+
+ vdcdc2 = i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC2);
+ vdcdc2 &= ~(1 << 1);
+ if (value)
+ vdcdc2 |= (1 << 1);
+ status = i2c_smbus_write_byte_data(the_tps->client,
+ TPS_VDCDC2, vdcdc2);
+
+ pr_debug("%s: vibrator %s\n", DRIVER_NAME, value ? "on" : "off");
+
+ mutex_unlock(&the_tps->lock);
+ return status;
+}
+EXPORT_SYMBOL(tps65010_set_vib);
+
+/*-------------------------------------------------------------------------*/
+/* tps65010_set_low_pwr parameter:
+ * mode: ON or OFF
+ */
+int tps65010_set_low_pwr(unsigned mode)
+{
+ int status;
+ unsigned vdcdc1;
+
+ if (!the_tps)
+ return -ENODEV;
+
+ mutex_lock(&the_tps->lock);
+
+ pr_debug("%s: %s low_pwr, vdcdc1 0x%02x\n", DRIVER_NAME,
+ mode ? "enable" : "disable",
+ i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1));
+
+ vdcdc1 = i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1);
+
+ switch (mode) {
+ case OFF:
+ vdcdc1 &= ~TPS_ENABLE_LP; /* disable ENABLE_LP bit */
+ break;
+ /* case ON: */
+ default:
+ vdcdc1 |= TPS_ENABLE_LP; /* enable ENABLE_LP bit */
+ break;
+ }
+
+ status = i2c_smbus_write_byte_data(the_tps->client,
+ TPS_VDCDC1, vdcdc1);
+
+ if (status != 0)
+ printk(KERN_ERR "%s: Failed to write vdcdc1 register\n",
+ DRIVER_NAME);
+ else
+ pr_debug("%s: vdcdc1 0x%02x\n", DRIVER_NAME,
+ i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1));
+
+ mutex_unlock(&the_tps->lock);
+
+ return status;
+}
+EXPORT_SYMBOL(tps65010_set_low_pwr);
+
+/*-------------------------------------------------------------------------*/
+/* tps65010_config_vregs1 parameter:
+ * value to be written to VREGS1 register
+ * Note: The complete register is written, set all bits you need
+ */
+int tps65010_config_vregs1(unsigned value)
+{
+ int status;
+
+ if (!the_tps)
+ return -ENODEV;
+
+ mutex_lock(&the_tps->lock);
+
+ pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
+ i2c_smbus_read_byte_data(the_tps->client, TPS_VREGS1));
+
+ status = i2c_smbus_write_byte_data(the_tps->client,
+ TPS_VREGS1, value);
+
+ if (status != 0)
+ printk(KERN_ERR "%s: Failed to write vregs1 register\n",
+ DRIVER_NAME);
+ else
+ pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
+ i2c_smbus_read_byte_data(the_tps->client, TPS_VREGS1));
+
+ mutex_unlock(&the_tps->lock);
+
+ return status;
+}
+EXPORT_SYMBOL(tps65010_config_vregs1);
+
+int tps65010_config_vdcdc2(unsigned value)
+{
+ struct i2c_client *c;
+ int status;
+
+ if (!the_tps)
+ return -ENODEV;
+
+ c = the_tps->client;
+ mutex_lock(&the_tps->lock);
+
+ pr_debug("%s: vdcdc2 0x%02x\n", DRIVER_NAME,
+ i2c_smbus_read_byte_data(c, TPS_VDCDC2));
+
+ status = i2c_smbus_write_byte_data(c, TPS_VDCDC2, value);
+
+ if (status != 0)
+ printk(KERN_ERR "%s: Failed to write vdcdc2 register\n",
+ DRIVER_NAME);
+ else
+ pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
+ i2c_smbus_read_byte_data(c, TPS_VDCDC2));
+
+ mutex_unlock(&the_tps->lock);
+ return status;
+}
+EXPORT_SYMBOL(tps65010_config_vdcdc2);
+
+/*-------------------------------------------------------------------------*/
+/* tps65013_set_low_pwr parameter:
+ * mode: ON or OFF
+ */
+
+/* FIXME: Assumes AC or USB power is present. Setting AUA bit is not
+ required if power supply is through a battery */
+
+int tps65013_set_low_pwr(unsigned mode)
+{
+ int status;
+ unsigned vdcdc1, chgconfig;
+
+ if (!the_tps || the_tps->por)
+ return -ENODEV;
+
+ mutex_lock(&the_tps->lock);
+
+ pr_debug("%s: %s low_pwr, chgconfig 0x%02x vdcdc1 0x%02x\n",
+ DRIVER_NAME,
+ mode ? "enable" : "disable",
+ i2c_smbus_read_byte_data(the_tps->client, TPS_CHGCONFIG),
+ i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1));
+
+ chgconfig = i2c_smbus_read_byte_data(the_tps->client, TPS_CHGCONFIG);
+ vdcdc1 = i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1);
+
+ switch (mode) {
+ case OFF:
+ chgconfig &= ~TPS65013_AUA; /* disable AUA bit */
+ vdcdc1 &= ~TPS_ENABLE_LP; /* disable ENABLE_LP bit */
+ break;
+ /* case ON: */
+ default:
+ chgconfig |= TPS65013_AUA; /* enable AUA bit */
+ vdcdc1 |= TPS_ENABLE_LP; /* enable ENABLE_LP bit */
+ break;
+ }
+
+ status = i2c_smbus_write_byte_data(the_tps->client,
+ TPS_CHGCONFIG, chgconfig);
+ if (status != 0) {
+ printk(KERN_ERR "%s: Failed to write chconfig register\n",
+ DRIVER_NAME);
+ mutex_unlock(&the_tps->lock);
+ return status;
+ }
+
+ chgconfig = i2c_smbus_read_byte_data(the_tps->client, TPS_CHGCONFIG);
+ the_tps->chgconf = chgconfig;
+ show_chgconfig(0, "chgconf", chgconfig);
+
+ status = i2c_smbus_write_byte_data(the_tps->client,
+ TPS_VDCDC1, vdcdc1);
+
+ if (status != 0)
+ printk(KERN_ERR "%s: Failed to write vdcdc1 register\n",
+ DRIVER_NAME);
+ else
+ pr_debug("%s: vdcdc1 0x%02x\n", DRIVER_NAME,
+ i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1));
+
+ mutex_unlock(&the_tps->lock);
+
+ return status;
+}
+EXPORT_SYMBOL(tps65013_set_low_pwr);
+
+/*-------------------------------------------------------------------------*/
+
+static int __init tps_init(void)
+{
+ return i2c_add_driver(&tps65010_driver);
+}
+/* NOTE: this MUST be initialized before the other parts of the system
+ * that rely on it ... but after the i2c bus on which this relies.
+ * That is, much earlier than on PC-type systems, which don't often use
+ * I2C as a core system bus.
+ */
+subsys_initcall(tps_init);
+
+static void __exit tps_exit(void)
+{
+ i2c_del_driver(&tps65010_driver);
+}
+module_exit(tps_exit);
+