summaryrefslogtreecommitdiffstats
path: root/drivers/mfd/twl4030-irq.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/mfd/twl4030-irq.c775
1 files changed, 775 insertions, 0 deletions
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
new file mode 100644
index 000000000..87496c1cb
--- /dev/null
+++ b/drivers/mfd/twl4030-irq.c
@@ -0,0 +1,775 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * twl4030-irq.c - TWL4030/TPS659x0 irq support
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * Modifications to defer interrupt handling to a kernel thread:
+ * Copyright (C) 2006 MontaVista Software, Inc.
+ *
+ * Based on tlv320aic23.c:
+ * Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
+ *
+ * Code cleanup and modifications to IRQ handler.
+ * by syed khasim <x0khasim@ti.com>
+ */
+
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/twl.h>
+
+#include "twl-core.h"
+
+/*
+ * TWL4030 IRQ handling has two stages in hardware, and thus in software.
+ * The Primary Interrupt Handler (PIH) stage exposes status bits saying
+ * which Secondary Interrupt Handler (SIH) stage is raising an interrupt.
+ * SIH modules are more traditional IRQ components, which support per-IRQ
+ * enable/disable and trigger controls; they do most of the work.
+ *
+ * These chips are designed to support IRQ handling from two different
+ * I2C masters. Each has a dedicated IRQ line, and dedicated IRQ status
+ * and mask registers in the PIH and SIH modules.
+ *
+ * We set up IRQs starting at a platform-specified base, always starting
+ * with PIH and the SIH for PWR_INT and then usually adding GPIO:
+ * base + 0 .. base + 7 PIH
+ * base + 8 .. base + 15 SIH for PWR_INT
+ * base + 16 .. base + 33 SIH for GPIO
+ */
+#define TWL4030_CORE_NR_IRQS 8
+#define TWL4030_PWR_NR_IRQS 8
+
+/* PIH register offsets */
+#define REG_PIH_ISR_P1 0x01
+#define REG_PIH_ISR_P2 0x02
+#define REG_PIH_SIR 0x03 /* for testing */
+
+/* Linux could (eventually) use either IRQ line */
+static int irq_line;
+
+struct sih {
+ char name[8];
+ u8 module; /* module id */
+ u8 control_offset; /* for SIH_CTRL */
+ bool set_cor;
+
+ u8 bits; /* valid in isr/imr */
+ u8 bytes_ixr; /* bytelen of ISR/IMR/SIR */
+
+ u8 edr_offset;
+ u8 bytes_edr; /* bytelen of EDR */
+
+ u8 irq_lines; /* number of supported irq lines */
+
+ /* SIR ignored -- set interrupt, for testing only */
+ struct sih_irq_data {
+ u8 isr_offset;
+ u8 imr_offset;
+ } mask[2];
+ /* + 2 bytes padding */
+};
+
+static const struct sih *sih_modules;
+static int nr_sih_modules;
+
+#define SIH_INITIALIZER(modname, nbits) \
+ .module = TWL4030_MODULE_ ## modname, \
+ .control_offset = TWL4030_ ## modname ## _SIH_CTRL, \
+ .bits = nbits, \
+ .bytes_ixr = DIV_ROUND_UP(nbits, 8), \
+ .edr_offset = TWL4030_ ## modname ## _EDR, \
+ .bytes_edr = DIV_ROUND_UP((2*(nbits)), 8), \
+ .irq_lines = 2, \
+ .mask = { { \
+ .isr_offset = TWL4030_ ## modname ## _ISR1, \
+ .imr_offset = TWL4030_ ## modname ## _IMR1, \
+ }, \
+ { \
+ .isr_offset = TWL4030_ ## modname ## _ISR2, \
+ .imr_offset = TWL4030_ ## modname ## _IMR2, \
+ }, },
+
+/* register naming policies are inconsistent ... */
+#define TWL4030_INT_PWR_EDR TWL4030_INT_PWR_EDR1
+#define TWL4030_MODULE_KEYPAD_KEYP TWL4030_MODULE_KEYPAD
+#define TWL4030_MODULE_INT_PWR TWL4030_MODULE_INT
+
+
+/*
+ * Order in this table matches order in PIH_ISR. That is,
+ * BIT(n) in PIH_ISR is sih_modules[n].
+ */
+/* sih_modules_twl4030 is used both in twl4030 and twl5030 */
+static const struct sih sih_modules_twl4030[6] = {
+ [0] = {
+ .name = "gpio",
+ .module = TWL4030_MODULE_GPIO,
+ .control_offset = REG_GPIO_SIH_CTRL,
+ .set_cor = true,
+ .bits = TWL4030_GPIO_MAX,
+ .bytes_ixr = 3,
+ /* Note: *all* of these IRQs default to no-trigger */
+ .edr_offset = REG_GPIO_EDR1,
+ .bytes_edr = 5,
+ .irq_lines = 2,
+ .mask = { {
+ .isr_offset = REG_GPIO_ISR1A,
+ .imr_offset = REG_GPIO_IMR1A,
+ }, {
+ .isr_offset = REG_GPIO_ISR1B,
+ .imr_offset = REG_GPIO_IMR1B,
+ }, },
+ },
+ [1] = {
+ .name = "keypad",
+ .set_cor = true,
+ SIH_INITIALIZER(KEYPAD_KEYP, 4)
+ },
+ [2] = {
+ .name = "bci",
+ .module = TWL4030_MODULE_INTERRUPTS,
+ .control_offset = TWL4030_INTERRUPTS_BCISIHCTRL,
+ .set_cor = true,
+ .bits = 12,
+ .bytes_ixr = 2,
+ .edr_offset = TWL4030_INTERRUPTS_BCIEDR1,
+ /* Note: most of these IRQs default to no-trigger */
+ .bytes_edr = 3,
+ .irq_lines = 2,
+ .mask = { {
+ .isr_offset = TWL4030_INTERRUPTS_BCIISR1A,
+ .imr_offset = TWL4030_INTERRUPTS_BCIIMR1A,
+ }, {
+ .isr_offset = TWL4030_INTERRUPTS_BCIISR1B,
+ .imr_offset = TWL4030_INTERRUPTS_BCIIMR1B,
+ }, },
+ },
+ [3] = {
+ .name = "madc",
+ SIH_INITIALIZER(MADC, 4)
+ },
+ [4] = {
+ /* USB doesn't use the same SIH organization */
+ .name = "usb",
+ },
+ [5] = {
+ .name = "power",
+ .set_cor = true,
+ SIH_INITIALIZER(INT_PWR, 8)
+ },
+ /* there are no SIH modules #6 or #7 ... */
+};
+
+static const struct sih sih_modules_twl5031[8] = {
+ [0] = {
+ .name = "gpio",
+ .module = TWL4030_MODULE_GPIO,
+ .control_offset = REG_GPIO_SIH_CTRL,
+ .set_cor = true,
+ .bits = TWL4030_GPIO_MAX,
+ .bytes_ixr = 3,
+ /* Note: *all* of these IRQs default to no-trigger */
+ .edr_offset = REG_GPIO_EDR1,
+ .bytes_edr = 5,
+ .irq_lines = 2,
+ .mask = { {
+ .isr_offset = REG_GPIO_ISR1A,
+ .imr_offset = REG_GPIO_IMR1A,
+ }, {
+ .isr_offset = REG_GPIO_ISR1B,
+ .imr_offset = REG_GPIO_IMR1B,
+ }, },
+ },
+ [1] = {
+ .name = "keypad",
+ .set_cor = true,
+ SIH_INITIALIZER(KEYPAD_KEYP, 4)
+ },
+ [2] = {
+ .name = "bci",
+ .module = TWL5031_MODULE_INTERRUPTS,
+ .control_offset = TWL5031_INTERRUPTS_BCISIHCTRL,
+ .bits = 7,
+ .bytes_ixr = 1,
+ .edr_offset = TWL5031_INTERRUPTS_BCIEDR1,
+ /* Note: most of these IRQs default to no-trigger */
+ .bytes_edr = 2,
+ .irq_lines = 2,
+ .mask = { {
+ .isr_offset = TWL5031_INTERRUPTS_BCIISR1,
+ .imr_offset = TWL5031_INTERRUPTS_BCIIMR1,
+ }, {
+ .isr_offset = TWL5031_INTERRUPTS_BCIISR2,
+ .imr_offset = TWL5031_INTERRUPTS_BCIIMR2,
+ }, },
+ },
+ [3] = {
+ .name = "madc",
+ SIH_INITIALIZER(MADC, 4)
+ },
+ [4] = {
+ /* USB doesn't use the same SIH organization */
+ .name = "usb",
+ },
+ [5] = {
+ .name = "power",
+ .set_cor = true,
+ SIH_INITIALIZER(INT_PWR, 8)
+ },
+ [6] = {
+ /*
+ * ECI/DBI doesn't use the same SIH organization.
+ * For example, it supports only one interrupt output line.
+ * That is, the interrupts are seen on both INT1 and INT2 lines.
+ */
+ .name = "eci_dbi",
+ .module = TWL5031_MODULE_ACCESSORY,
+ .bits = 9,
+ .bytes_ixr = 2,
+ .irq_lines = 1,
+ .mask = { {
+ .isr_offset = TWL5031_ACIIDR_LSB,
+ .imr_offset = TWL5031_ACIIMR_LSB,
+ }, },
+
+ },
+ [7] = {
+ /* Audio accessory */
+ .name = "audio",
+ .module = TWL5031_MODULE_ACCESSORY,
+ .control_offset = TWL5031_ACCSIHCTRL,
+ .bits = 2,
+ .bytes_ixr = 1,
+ .edr_offset = TWL5031_ACCEDR1,
+ /* Note: most of these IRQs default to no-trigger */
+ .bytes_edr = 1,
+ .irq_lines = 2,
+ .mask = { {
+ .isr_offset = TWL5031_ACCISR1,
+ .imr_offset = TWL5031_ACCIMR1,
+ }, {
+ .isr_offset = TWL5031_ACCISR2,
+ .imr_offset = TWL5031_ACCIMR2,
+ }, },
+ },
+};
+
+#undef TWL4030_MODULE_KEYPAD_KEYP
+#undef TWL4030_MODULE_INT_PWR
+#undef TWL4030_INT_PWR_EDR
+
+/*----------------------------------------------------------------------*/
+
+static unsigned twl4030_irq_base;
+
+/*
+ * handle_twl4030_pih() is the desc->handle method for the twl4030 interrupt.
+ * This is a chained interrupt, so there is no desc->action method for it.
+ * Now we need to query the interrupt controller in the twl4030 to determine
+ * which module is generating the interrupt request. However, we can't do i2c
+ * transactions in interrupt context, so we must defer that work to a kernel
+ * thread. All we do here is acknowledge and mask the interrupt and wakeup
+ * the kernel thread.
+ */
+static irqreturn_t handle_twl4030_pih(int irq, void *devid)
+{
+ irqreturn_t ret;
+ u8 pih_isr;
+
+ ret = twl_i2c_read_u8(TWL_MODULE_PIH, &pih_isr,
+ REG_PIH_ISR_P1);
+ if (ret) {
+ pr_warn("twl4030: I2C error %d reading PIH ISR\n", ret);
+ return IRQ_NONE;
+ }
+
+ while (pih_isr) {
+ unsigned long pending = __ffs(pih_isr);
+ unsigned int irq;
+
+ pih_isr &= ~BIT(pending);
+ irq = pending + twl4030_irq_base;
+ handle_nested_irq(irq);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * twl4030_init_sih_modules() ... start from a known state where no
+ * IRQs will be coming in, and where we can quickly enable them then
+ * handle them as they arrive. Mask all IRQs: maybe init SIH_CTRL.
+ *
+ * NOTE: we don't touch EDR registers here; they stay with hardware
+ * defaults or whatever the last value was. Note that when both EDR
+ * bits for an IRQ are clear, that's as if its IMR bit is set...
+ */
+static int twl4030_init_sih_modules(unsigned line)
+{
+ const struct sih *sih;
+ u8 buf[4];
+ int i;
+ int status;
+
+ /* line 0 == int1_n signal; line 1 == int2_n signal */
+ if (line > 1)
+ return -EINVAL;
+
+ irq_line = line;
+
+ /* disable all interrupts on our line */
+ memset(buf, 0xff, sizeof(buf));
+ sih = sih_modules;
+ for (i = 0; i < nr_sih_modules; i++, sih++) {
+ /* skip USB -- it's funky */
+ if (!sih->bytes_ixr)
+ continue;
+
+ /* Not all the SIH modules support multiple interrupt lines */
+ if (sih->irq_lines <= line)
+ continue;
+
+ status = twl_i2c_write(sih->module, buf,
+ sih->mask[line].imr_offset, sih->bytes_ixr);
+ if (status < 0)
+ pr_err("twl4030: err %d initializing %s %s\n",
+ status, sih->name, "IMR");
+
+ /*
+ * Maybe disable "exclusive" mode; buffer second pending irq;
+ * set Clear-On-Read (COR) bit.
+ *
+ * NOTE that sometimes COR polarity is documented as being
+ * inverted: for MADC, COR=1 means "clear on write".
+ * And for PWR_INT it's not documented...
+ */
+ if (sih->set_cor) {
+ status = twl_i2c_write_u8(sih->module,
+ TWL4030_SIH_CTRL_COR_MASK,
+ sih->control_offset);
+ if (status < 0)
+ pr_err("twl4030: err %d initializing %s %s\n",
+ status, sih->name, "SIH_CTRL");
+ }
+ }
+
+ sih = sih_modules;
+ for (i = 0; i < nr_sih_modules; i++, sih++) {
+ u8 rxbuf[4];
+ int j;
+
+ /* skip USB */
+ if (!sih->bytes_ixr)
+ continue;
+
+ /* Not all the SIH modules support multiple interrupt lines */
+ if (sih->irq_lines <= line)
+ continue;
+
+ /*
+ * Clear pending interrupt status. Either the read was
+ * enough, or we need to write those bits. Repeat, in
+ * case an IRQ is pending (PENDDIS=0) ... that's not
+ * uncommon with PWR_INT.PWRON.
+ */
+ for (j = 0; j < 2; j++) {
+ status = twl_i2c_read(sih->module, rxbuf,
+ sih->mask[line].isr_offset, sih->bytes_ixr);
+ if (status < 0)
+ pr_warn("twl4030: err %d initializing %s %s\n",
+ status, sih->name, "ISR");
+
+ if (!sih->set_cor) {
+ status = twl_i2c_write(sih->module, buf,
+ sih->mask[line].isr_offset,
+ sih->bytes_ixr);
+ if (status < 0)
+ pr_warn("twl4030: write failed: %d\n",
+ status);
+ }
+ /*
+ * else COR=1 means read sufficed.
+ * (for most SIH modules...)
+ */
+ }
+ }
+
+ return 0;
+}
+
+static inline void activate_irq(int irq)
+{
+ irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
+}
+
+/*----------------------------------------------------------------------*/
+
+struct sih_agent {
+ int irq_base;
+ const struct sih *sih;
+
+ u32 imr;
+ bool imr_change_pending;
+
+ u32 edge_change;
+
+ struct mutex irq_lock;
+ char *irq_name;
+};
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * All irq_chip methods get issued from code holding irq_desc[irq].lock,
+ * which can't perform the underlying I2C operations (because they sleep).
+ * So we must hand them off to a thread (workqueue) and cope with asynch
+ * completion, potentially including some re-ordering, of these requests.
+ */
+
+static void twl4030_sih_mask(struct irq_data *data)
+{
+ struct sih_agent *agent = irq_data_get_irq_chip_data(data);
+
+ agent->imr |= BIT(data->irq - agent->irq_base);
+ agent->imr_change_pending = true;
+}
+
+static void twl4030_sih_unmask(struct irq_data *data)
+{
+ struct sih_agent *agent = irq_data_get_irq_chip_data(data);
+
+ agent->imr &= ~BIT(data->irq - agent->irq_base);
+ agent->imr_change_pending = true;
+}
+
+static int twl4030_sih_set_type(struct irq_data *data, unsigned trigger)
+{
+ struct sih_agent *agent = irq_data_get_irq_chip_data(data);
+
+ if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+ return -EINVAL;
+
+ if (irqd_get_trigger_type(data) != trigger)
+ agent->edge_change |= BIT(data->irq - agent->irq_base);
+
+ return 0;
+}
+
+static void twl4030_sih_bus_lock(struct irq_data *data)
+{
+ struct sih_agent *agent = irq_data_get_irq_chip_data(data);
+
+ mutex_lock(&agent->irq_lock);
+}
+
+static void twl4030_sih_bus_sync_unlock(struct irq_data *data)
+{
+ struct sih_agent *agent = irq_data_get_irq_chip_data(data);
+ const struct sih *sih = agent->sih;
+ int status;
+
+ if (agent->imr_change_pending) {
+ union {
+ __le32 word;
+ u8 bytes[4];
+ } imr;
+
+ /* byte[0] gets overwritten as we write ... */
+ imr.word = cpu_to_le32(agent->imr);
+ agent->imr_change_pending = false;
+
+ /* write the whole mask ... simpler than subsetting it */
+ status = twl_i2c_write(sih->module, imr.bytes,
+ sih->mask[irq_line].imr_offset,
+ sih->bytes_ixr);
+ if (status)
+ pr_err("twl4030: %s, %s --> %d\n", __func__,
+ "write", status);
+ }
+
+ if (agent->edge_change) {
+ u32 edge_change;
+ u8 bytes[6];
+
+ edge_change = agent->edge_change;
+ agent->edge_change = 0;
+
+ /*
+ * Read, reserving first byte for write scratch. Yes, this
+ * could be cached for some speedup ... but be careful about
+ * any processor on the other IRQ line, EDR registers are
+ * shared.
+ */
+ status = twl_i2c_read(sih->module, bytes,
+ sih->edr_offset, sih->bytes_edr);
+ if (status) {
+ pr_err("twl4030: %s, %s --> %d\n", __func__,
+ "read", status);
+ return;
+ }
+
+ /* Modify only the bits we know must change */
+ while (edge_change) {
+ int i = fls(edge_change) - 1;
+ int byte = i >> 2;
+ int off = (i & 0x3) * 2;
+ unsigned int type;
+
+ bytes[byte] &= ~(0x03 << off);
+
+ type = irq_get_trigger_type(i + agent->irq_base);
+ if (type & IRQ_TYPE_EDGE_RISING)
+ bytes[byte] |= BIT(off + 1);
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ bytes[byte] |= BIT(off + 0);
+
+ edge_change &= ~BIT(i);
+ }
+
+ /* Write */
+ status = twl_i2c_write(sih->module, bytes,
+ sih->edr_offset, sih->bytes_edr);
+ if (status)
+ pr_err("twl4030: %s, %s --> %d\n", __func__,
+ "write", status);
+ }
+
+ mutex_unlock(&agent->irq_lock);
+}
+
+static struct irq_chip twl4030_sih_irq_chip = {
+ .name = "twl4030",
+ .irq_mask = twl4030_sih_mask,
+ .irq_unmask = twl4030_sih_unmask,
+ .irq_set_type = twl4030_sih_set_type,
+ .irq_bus_lock = twl4030_sih_bus_lock,
+ .irq_bus_sync_unlock = twl4030_sih_bus_sync_unlock,
+ .flags = IRQCHIP_SKIP_SET_WAKE,
+};
+
+/*----------------------------------------------------------------------*/
+
+static inline int sih_read_isr(const struct sih *sih)
+{
+ int status;
+ union {
+ u8 bytes[4];
+ __le32 word;
+ } isr;
+
+ /* FIXME need retry-on-error ... */
+
+ isr.word = 0;
+ status = twl_i2c_read(sih->module, isr.bytes,
+ sih->mask[irq_line].isr_offset, sih->bytes_ixr);
+
+ return (status < 0) ? status : le32_to_cpu(isr.word);
+}
+
+/*
+ * Generic handler for SIH interrupts ... we "know" this is called
+ * in task context, with IRQs enabled.
+ */
+static irqreturn_t handle_twl4030_sih(int irq, void *data)
+{
+ struct sih_agent *agent = irq_get_handler_data(irq);
+ const struct sih *sih = agent->sih;
+ int isr;
+
+ /* reading ISR acks the IRQs, using clear-on-read mode */
+ isr = sih_read_isr(sih);
+
+ if (isr < 0) {
+ pr_err("twl4030: %s SIH, read ISR error %d\n",
+ sih->name, isr);
+ /* REVISIT: recover; eventually mask it all, etc */
+ return IRQ_HANDLED;
+ }
+
+ while (isr) {
+ irq = fls(isr);
+ irq--;
+ isr &= ~BIT(irq);
+
+ if (irq < sih->bits)
+ handle_nested_irq(agent->irq_base + irq);
+ else
+ pr_err("twl4030: %s SIH, invalid ISR bit %d\n",
+ sih->name, irq);
+ }
+ return IRQ_HANDLED;
+}
+
+/* returns the first IRQ used by this SIH bank, or negative errno */
+int twl4030_sih_setup(struct device *dev, int module, int irq_base)
+{
+ int sih_mod;
+ const struct sih *sih = NULL;
+ struct sih_agent *agent;
+ int i, irq;
+ int status = -EINVAL;
+
+ /* only support modules with standard clear-on-read for now */
+ for (sih_mod = 0, sih = sih_modules; sih_mod < nr_sih_modules;
+ sih_mod++, sih++) {
+ if (sih->module == module && sih->set_cor) {
+ status = 0;
+ break;
+ }
+ }
+
+ if (status < 0) {
+ dev_err(dev, "module to setup SIH for not found\n");
+ return status;
+ }
+
+ agent = kzalloc(sizeof(*agent), GFP_KERNEL);
+ if (!agent)
+ return -ENOMEM;
+
+ agent->irq_base = irq_base;
+ agent->sih = sih;
+ agent->imr = ~0;
+ mutex_init(&agent->irq_lock);
+
+ for (i = 0; i < sih->bits; i++) {
+ irq = irq_base + i;
+
+ irq_set_chip_data(irq, agent);
+ irq_set_chip_and_handler(irq, &twl4030_sih_irq_chip,
+ handle_edge_irq);
+ irq_set_nested_thread(irq, 1);
+ activate_irq(irq);
+ }
+
+ /* replace generic PIH handler (handle_simple_irq) */
+ irq = sih_mod + twl4030_irq_base;
+ irq_set_handler_data(irq, agent);
+ agent->irq_name = kasprintf(GFP_KERNEL, "twl4030_%s", sih->name);
+ status = request_threaded_irq(irq, NULL, handle_twl4030_sih,
+ IRQF_EARLY_RESUME | IRQF_ONESHOT,
+ agent->irq_name ?: sih->name, NULL);
+
+ dev_info(dev, "%s (irq %d) chaining IRQs %d..%d\n", sih->name,
+ irq, irq_base, irq_base + i - 1);
+
+ return status < 0 ? status : irq_base;
+}
+
+/* FIXME need a call to reverse twl4030_sih_setup() ... */
+
+/*----------------------------------------------------------------------*/
+
+/* FIXME pass in which interrupt line we'll use ... */
+#define twl_irq_line 0
+
+int twl4030_init_irq(struct device *dev, int irq_num)
+{
+ static struct irq_chip twl4030_irq_chip;
+ int status, i;
+ int irq_base, irq_end, nr_irqs;
+ struct device_node *node = dev->of_node;
+
+ /*
+ * TWL core and pwr interrupts must be contiguous because
+ * the hwirqs numbers are defined contiguously from 1 to 15.
+ * Create only one domain for both.
+ */
+ nr_irqs = TWL4030_PWR_NR_IRQS + TWL4030_CORE_NR_IRQS;
+
+ irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0);
+ if (irq_base < 0) {
+ dev_err(dev, "Fail to allocate IRQ descs\n");
+ return irq_base;
+ }
+
+ irq_domain_add_legacy(node, nr_irqs, irq_base, 0,
+ &irq_domain_simple_ops, NULL);
+
+ irq_end = irq_base + TWL4030_CORE_NR_IRQS;
+
+ /*
+ * Mask and clear all TWL4030 interrupts since initially we do
+ * not have any TWL4030 module interrupt handlers present
+ */
+ status = twl4030_init_sih_modules(twl_irq_line);
+ if (status < 0)
+ return status;
+
+ twl4030_irq_base = irq_base;
+
+ /*
+ * Install an irq handler for each of the SIH modules;
+ * clone dummy irq_chip since PIH can't *do* anything
+ */
+ twl4030_irq_chip = dummy_irq_chip;
+ twl4030_irq_chip.name = "twl4030";
+
+ twl4030_sih_irq_chip.irq_ack = dummy_irq_chip.irq_ack;
+
+ for (i = irq_base; i < irq_end; i++) {
+ irq_set_chip_and_handler(i, &twl4030_irq_chip,
+ handle_simple_irq);
+ irq_set_nested_thread(i, 1);
+ activate_irq(i);
+ }
+
+ dev_info(dev, "%s (irq %d) chaining IRQs %d..%d\n", "PIH",
+ irq_num, irq_base, irq_end);
+
+ /* ... and the PWR_INT module ... */
+ status = twl4030_sih_setup(dev, TWL4030_MODULE_INT, irq_end);
+ if (status < 0) {
+ dev_err(dev, "sih_setup PWR INT --> %d\n", status);
+ goto fail;
+ }
+
+ /* install an irq handler to demultiplex the TWL4030 interrupt */
+ status = request_threaded_irq(irq_num, NULL, handle_twl4030_pih,
+ IRQF_ONESHOT,
+ "TWL4030-PIH", NULL);
+ if (status < 0) {
+ dev_err(dev, "could not claim irq%d: %d\n", irq_num, status);
+ goto fail_rqirq;
+ }
+ enable_irq_wake(irq_num);
+
+ return irq_base;
+fail_rqirq:
+ /* clean up twl4030_sih_setup */
+fail:
+ for (i = irq_base; i < irq_end; i++) {
+ irq_set_nested_thread(i, 0);
+ irq_set_chip_and_handler(i, NULL, NULL);
+ }
+
+ return status;
+}
+
+void twl4030_exit_irq(void)
+{
+ /* FIXME undo twl_init_irq() */
+ if (twl4030_irq_base)
+ pr_err("twl4030: can't yet clean up IRQs?\n");
+}
+
+int twl4030_init_chip_irq(const char *chip)
+{
+ if (!strcmp(chip, "twl5031")) {
+ sih_modules = sih_modules_twl5031;
+ nr_sih_modules = ARRAY_SIZE(sih_modules_twl5031);
+ } else {
+ sih_modules = sih_modules_twl4030;
+ nr_sih_modules = ARRAY_SIZE(sih_modules_twl4030);
+ }
+
+ return 0;
+}