summaryrefslogtreecommitdiffstats
path: root/drivers/misc/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/misc/Kconfig')
-rw-r--r--drivers/misc/Kconfig518
1 files changed, 518 insertions, 0 deletions
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
new file mode 100644
index 000000000..0cef98319
--- /dev/null
+++ b/drivers/misc/Kconfig
@@ -0,0 +1,518 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Misc strange devices
+#
+
+menu "Misc devices"
+
+config SENSORS_LIS3LV02D
+ tristate
+ depends on INPUT
+
+config AD525X_DPOT
+ tristate "Analog Devices Digital Potentiometers"
+ depends on (I2C || SPI) && SYSFS
+ help
+ If you say yes here, you get support for the Analog Devices
+ AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255
+ AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203,
+ AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235,
+ AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293,
+ AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242,
+ AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282,
+ ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173, AD5270,
+ AD5271, AD5272, AD5274
+ digital potentiometer chips.
+
+ See Documentation/misc-devices/ad525x_dpot.rst for the
+ userspace interface.
+
+ This driver can also be built as a module. If so, the module
+ will be called ad525x_dpot.
+
+config AD525X_DPOT_I2C
+ tristate "support I2C bus connection"
+ depends on AD525X_DPOT && I2C
+ help
+ Say Y here if you have a digital potentiometers hooked to an I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad525x_dpot-i2c.
+
+config AD525X_DPOT_SPI
+ tristate "support SPI bus connection"
+ depends on AD525X_DPOT && SPI_MASTER
+ help
+ Say Y here if you have a digital potentiometers hooked to an SPI bus.
+
+ If unsure, say N (but it's safe to say "Y").
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad525x_dpot-spi.
+
+config DUMMY_IRQ
+ tristate "Dummy IRQ handler"
+ help
+ This module accepts a single 'irq' parameter, which it should register for.
+ The sole purpose of this module is to help with debugging of systems on
+ which spurious IRQs would happen on disabled IRQ vector.
+
+config IBM_ASM
+ tristate "Device driver for IBM RSA service processor"
+ depends on X86 && PCI && INPUT
+ depends on SERIAL_8250 || SERIAL_8250=n
+ help
+ This option enables device driver support for in-band access to the
+ IBM RSA (Condor) service processor in eServer xSeries systems.
+ The ibmasm device driver allows user space application to access
+ ASM (Advanced Systems Management) functions on the service
+ processor. The driver is meant to be used in conjunction with
+ a user space API.
+ The ibmasm driver also enables the OS to use the UART on the
+ service processor board as a regular serial port. To make use of
+ this feature serial driver support (CONFIG_SERIAL_8250) must be
+ enabled.
+
+ WARNING: This software may not be supported or function
+ correctly on your IBM server. Please consult the IBM ServerProven
+ website <https://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/>
+ for information on the specific driver level and support statement
+ for your IBM server.
+
+config IBMVMC
+ tristate "IBM Virtual Management Channel support"
+ depends on PPC_PSERIES
+ help
+ This is the IBM POWER Virtual Management Channel
+
+ This driver is to be used for the POWER Virtual
+ Management Channel virtual adapter on the PowerVM
+ platform. It provides both request/response and
+ async message support through the /dev/ibmvmc node.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ibmvmc.
+
+config PHANTOM
+ tristate "Sensable PHANToM (PCI)"
+ depends on PCI
+ help
+ Say Y here if you want to build a driver for Sensable PHANToM device.
+
+ This driver is only for PCI PHANToMs.
+
+ If you choose to build module, its name will be phantom. If unsure,
+ say N here.
+
+config TIFM_CORE
+ tristate "TI Flash Media interface support"
+ depends on PCI
+ help
+ If you want support for Texas Instruments(R) Flash Media adapters
+ you should select this option and then also choose an appropriate
+ host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter
+ support', if you have a TI PCI74xx compatible card reader, for
+ example.
+ You will also have to select some flash card format drivers. MMC/SD
+ cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD
+ Interface support (MMC_TIFM_SD)'.
+
+ To compile this driver as a module, choose M here: the module will
+ be called tifm_core.
+
+config TIFM_7XX1
+ tristate "TI Flash Media PCI74xx/PCI76xx host adapter support"
+ depends on PCI && TIFM_CORE
+ default TIFM_CORE
+ help
+ This option enables support for Texas Instruments(R) PCI74xx and
+ PCI76xx families of Flash Media adapters, found in many laptops.
+ To make actual use of the device, you will have to select some
+ flash card format drivers, as outlined in the TIFM_CORE Help.
+
+ To compile this driver as a module, choose M here: the module will
+ be called tifm_7xx1.
+
+config ICS932S401
+ tristate "Integrated Circuits ICS932S401"
+ depends on I2C
+ help
+ If you say yes here you get support for the Integrated Circuits
+ ICS932S401 clock control chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called ics932s401.
+
+config ATMEL_SSC
+ tristate "Device driver for Atmel SSC peripheral"
+ depends on HAS_IOMEM && (ARCH_AT91 || COMPILE_TEST)
+ help
+ This option enables device driver support for Atmel Synchronized
+ Serial Communication peripheral (SSC).
+
+ The SSC peripheral supports a wide variety of serial frame based
+ communications, i.e. I2S, SPI, etc.
+
+ If unsure, say N.
+
+config ENCLOSURE_SERVICES
+ tristate "Enclosure Services"
+ help
+ Provides support for intelligent enclosures (bays which
+ contain storage devices). You also need either a host
+ driver (SCSI/ATA) which supports enclosures
+ or a SCSI enclosure device (SES) to use these services.
+
+config SGI_XP
+ tristate "Support communication between SGI SSIs"
+ depends on NET
+ depends on (IA64_SGI_UV || X86_UV) && SMP
+ depends on X86_64 || BROKEN
+ select SGI_GRU if X86_64 && SMP
+ help
+ An SGI machine can be divided into multiple Single System
+ Images which act independently of each other and have
+ hardware based memory protection from the others. Enabling
+ this feature will allow for direct communication between SSIs
+ based on a network adapter and DMA messaging.
+
+config CS5535_MFGPT
+ tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"
+ depends on MFD_CS5535
+ help
+ This driver provides access to MFGPT functionality for other
+ drivers that need timers. MFGPTs are available in the CS5535 and
+ CS5536 companion chips that are found in AMD Geode and several
+ other platforms. They have a better resolution and max interval
+ than the generic PIT, and are suitable for use as high-res timers.
+ You probably don't want to enable this manually; other drivers that
+ make use of it should enable it.
+
+config CS5535_MFGPT_DEFAULT_IRQ
+ int
+ depends on CS5535_MFGPT
+ default 7
+ help
+ MFGPTs on the CS5535 require an interrupt. The selected IRQ
+ can be overridden as a module option as well as by driver that
+ use the cs5535_mfgpt_ API; however, different architectures might
+ want to use a different IRQ by default. This is here for
+ architectures to set as necessary.
+
+config CS5535_CLOCK_EVENT_SRC
+ tristate "CS5535/CS5536 high-res timer (MFGPT) events"
+ depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT
+ help
+ This driver provides a clock event source based on the MFGPT
+ timer(s) in the CS5535 and CS5536 companion chips.
+ MFGPTs have a better resolution and max interval than the
+ generic PIT, and are suitable for use as high-res timers.
+
+config GEHC_ACHC
+ tristate "GEHC ACHC support"
+ depends on SPI && SYSFS
+ depends on SOC_IMX53 || COMPILE_TEST
+ select FW_LOADER
+ help
+ Support for GE ACHC microcontroller, that is part of the GE
+ PPD device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gehc-achc.
+
+config HI6421V600_IRQ
+ tristate "HiSilicon Hi6421v600 IRQ and powerkey"
+ depends on OF
+ depends on SPMI
+ depends on HAS_IOMEM
+ select MFD_CORE
+ select REGMAP_SPMI
+ help
+ This driver provides IRQ handling for Hi6421v600, used on
+ some Kirin chipsets, like the one at Hikey 970.
+
+config HP_ILO
+ tristate "Channel interface driver for the HP iLO processor"
+ depends on PCI
+ help
+ The channel interface driver allows applications to communicate
+ with iLO management processors present on HP ProLiant servers.
+ Upon loading, the driver creates /dev/hpilo/dXccbN files, which
+ can be used to gather data from the management processor, via
+ read and write system calls.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hpilo.
+
+config QCOM_COINCELL
+ tristate "Qualcomm coincell charger support"
+ depends on MFD_SPMI_PMIC || COMPILE_TEST
+ help
+ This driver supports the coincell block found inside of
+ Qualcomm PMICs. The coincell charger provides a means to
+ charge a coincell battery or backup capacitor which is used
+ to maintain PMIC register and RTC state in the absence of
+ external power.
+
+config QCOM_FASTRPC
+ tristate "Qualcomm FastRPC"
+ depends on ARCH_QCOM || COMPILE_TEST
+ depends on RPMSG
+ select DMA_SHARED_BUFFER
+ select QCOM_SCM
+ help
+ Provides a communication mechanism that allows for clients to
+ make remote method invocations across processor boundary to
+ applications DSP processor. Say M if you want to enable this
+ module.
+
+config SGI_GRU
+ tristate "SGI GRU driver"
+ depends on X86_UV && SMP
+ select MMU_NOTIFIER
+ help
+ The GRU is a hardware resource located in the system chipset. The GRU
+ contains memory that can be mmapped into the user address space. This memory is
+ used to communicate with the GRU to perform functions such as load/store,
+ scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user
+ instructions using user virtual addresses. GRU instructions (ex., bcopy) use
+ user virtual addresses for operands.
+
+ If you are not running on a SGI UV system, say N.
+
+config SGI_GRU_DEBUG
+ bool "SGI GRU driver debug"
+ depends on SGI_GRU
+ help
+ This option enables additional debugging code for the SGI GRU driver.
+ If you are unsure, say N.
+
+config APDS9802ALS
+ tristate "Medfield Avago APDS9802 ALS Sensor module"
+ depends on I2C
+ help
+ If you say yes here you get support for the ALS APDS9802 ambient
+ light sensor.
+
+ This driver can also be built as a module. If so, the module
+ will be called apds9802als.
+
+config ISL29003
+ tristate "Intersil ISL29003 ambient light sensor"
+ depends on I2C && SYSFS
+ help
+ If you say yes here you get support for the Intersil ISL29003
+ ambient light sensor.
+
+ This driver can also be built as a module. If so, the module
+ will be called isl29003.
+
+config ISL29020
+ tristate "Intersil ISL29020 ambient light sensor"
+ depends on I2C
+ help
+ If you say yes here you get support for the Intersil ISL29020
+ ambient light sensor.
+
+ This driver can also be built as a module. If so, the module
+ will be called isl29020.
+
+config SENSORS_TSL2550
+ tristate "Taos TSL2550 ambient light sensor"
+ depends on I2C && SYSFS
+ help
+ If you say yes here you get support for the Taos TSL2550
+ ambient light sensor.
+
+ This driver can also be built as a module. If so, the module
+ will be called tsl2550.
+
+config SENSORS_BH1770
+ tristate "BH1770GLC / SFH7770 combined ALS - Proximity sensor"
+ depends on I2C
+ help
+ Say Y here if you want to build a driver for BH1770GLC (ROHM) or
+ SFH7770 (Osram) combined ambient light and proximity sensor chip.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bh1770glc. If unsure, say N here.
+
+config SENSORS_APDS990X
+ tristate "APDS990X combined als and proximity sensors"
+ depends on I2C
+ help
+ Say Y here if you want to build a driver for Avago APDS990x
+ combined ambient light and proximity sensor chip.
+
+ To compile this driver as a module, choose M here: the
+ module will be called apds990x. If unsure, say N here.
+
+config HMC6352
+ tristate "Honeywell HMC6352 compass"
+ depends on I2C
+ help
+ This driver provides support for the Honeywell HMC6352 compass,
+ providing configuration and heading data via sysfs.
+
+config DS1682
+ tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"
+ depends on I2C
+ help
+ If you say yes here you get support for Dallas Semiconductor
+ DS1682 Total Elapsed Time Recorder.
+
+ This driver can also be built as a module. If so, the module
+ will be called ds1682.
+
+config VMWARE_BALLOON
+ tristate "VMware Balloon Driver"
+ depends on VMWARE_VMCI && X86 && HYPERVISOR_GUEST
+ select MEMORY_BALLOON
+ help
+ This is VMware physical memory management driver which acts
+ like a "balloon" that can be inflated to reclaim physical pages
+ by reserving them in the guest and invalidating them in the
+ monitor, freeing up the underlying machine pages so they can
+ be allocated to other guests. The balloon can also be deflated
+ to allow the guest to use more physical memory.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vmw_balloon.
+
+config PCH_PHUB
+ tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB"
+ select GENERIC_NET_UTILS
+ depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
+ help
+ This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of
+ Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded
+ processor. The Topcliff has MAC address and Option ROM data in SROM.
+ This driver can access MAC address and Option ROM data in SROM.
+
+ This driver also can be used for LAPIS Semiconductor's IOH,
+ ML7213/ML7223/ML7831.
+ ML7213 which is for IVI(In-Vehicle Infotainment) use.
+ ML7223 IOH is for MP(Media Phone) use.
+ ML7831 IOH is for general purpose use.
+ ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+ ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
+
+ To compile this driver as a module, choose M here: the module will
+ be called pch_phub.
+
+config LATTICE_ECP3_CONFIG
+ tristate "Lattice ECP3 FPGA bitstream configuration via SPI"
+ depends on SPI && SYSFS
+ select FW_LOADER
+ default n
+ help
+ This option enables support for bitstream configuration (programming
+ or loading) of the Lattice ECP3 FPGA family via SPI.
+
+ If unsure, say N.
+
+config SRAM
+ bool "Generic on-chip SRAM driver"
+ depends on HAS_IOMEM
+ select GENERIC_ALLOCATOR
+ select SRAM_EXEC if ARM
+ help
+ This driver allows you to declare a memory region to be managed by
+ the genalloc API. It is supposed to be used for small on-chip SRAM
+ areas found on many SoCs.
+
+config SRAM_EXEC
+ bool
+
+config DW_XDATA_PCIE
+ depends on PCI
+ tristate "Synopsys DesignWare xData PCIe driver"
+ help
+ This driver allows controlling Synopsys DesignWare PCIe traffic
+ generator IP also known as xData, present in Synopsys DesignWare
+ PCIe Endpoint prototype.
+
+ If unsure, say N.
+
+config PCI_ENDPOINT_TEST
+ depends on PCI
+ select CRC32
+ tristate "PCI Endpoint Test driver"
+ help
+ Enable this configuration option to enable the host side test driver
+ for PCI Endpoint.
+
+config XILINX_SDFEC
+ tristate "Xilinx SDFEC 16"
+ depends on HAS_IOMEM
+ help
+ This option enables support for the Xilinx SDFEC (Soft Decision
+ Forward Error Correction) driver. This enables a char driver
+ for the SDFEC.
+
+ You may select this driver if your design instantiates the
+ SDFEC(16nm) hardened block. To compile this as a module choose M.
+
+ If unsure, say N.
+
+config MISC_RTSX
+ tristate
+ default MISC_RTSX_PCI || MISC_RTSX_USB
+
+config HISI_HIKEY_USB
+ tristate "USB GPIO Hub on HiSilicon Hikey 960/970 Platform"
+ depends on (OF && GPIOLIB) || COMPILE_TEST
+ depends on USB_ROLE_SWITCH
+ help
+ If you say yes here this adds support for the on-board USB GPIO hub
+ found on HiKey 960/970 boards, which is necessary to support
+ switching between the dual-role USB-C port and the USB-A host ports
+ using only one USB controller.
+
+config OPEN_DICE
+ tristate "Open Profile for DICE driver"
+ depends on OF_RESERVED_MEM
+ depends on HAS_IOMEM
+ help
+ This driver exposes a DICE reserved memory region to userspace via
+ a character device. The memory region contains Compound Device
+ Identifiers (CDIs) generated by firmware as an output of DICE
+ measured boot flow. Userspace can use CDIs for remote attestation
+ and sealing.
+
+ If unsure, say N.
+
+config VCPU_STALL_DETECTOR
+ tristate "Guest vCPU stall detector"
+ depends on OF && HAS_IOMEM
+ help
+ When this driver is bound inside a KVM guest, it will
+ periodically "pet" an MMIO stall detector device from each vCPU
+ and allow the host to detect vCPU stalls.
+
+ To compile this driver as a module, choose M here: the module
+ will be called vcpu_stall_detector.
+
+ If you do not intend to run this kernel as a guest, say N.
+
+source "drivers/misc/c2port/Kconfig"
+source "drivers/misc/eeprom/Kconfig"
+source "drivers/misc/cb710/Kconfig"
+source "drivers/misc/ti-st/Kconfig"
+source "drivers/misc/lis3lv02d/Kconfig"
+source "drivers/misc/altera-stapl/Kconfig"
+source "drivers/misc/mei/Kconfig"
+source "drivers/misc/vmw_vmci/Kconfig"
+source "drivers/misc/genwqe/Kconfig"
+source "drivers/misc/echo/Kconfig"
+source "drivers/misc/cxl/Kconfig"
+source "drivers/misc/ocxl/Kconfig"
+source "drivers/misc/bcm-vk/Kconfig"
+source "drivers/misc/cardreader/Kconfig"
+source "drivers/misc/habanalabs/Kconfig"
+source "drivers/misc/uacce/Kconfig"
+source "drivers/misc/pvpanic/Kconfig"
+source "drivers/misc/mchp_pci1xxxx/Kconfig"
+endmenu