diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/misc/genwqe/Kconfig | 19 | ||||
| -rw-r--r-- | drivers/misc/genwqe/Makefile | 8 | ||||
| -rw-r--r-- | drivers/misc/genwqe/card_base.c | 1401 | ||||
| -rw-r--r-- | drivers/misc/genwqe/card_base.h | 577 | ||||
| -rw-r--r-- | drivers/misc/genwqe/card_ddcb.c | 1411 | ||||
| -rw-r--r-- | drivers/misc/genwqe/card_ddcb.h | 179 | ||||
| -rw-r--r-- | drivers/misc/genwqe/card_debugfs.c | 378 | ||||
| -rw-r--r-- | drivers/misc/genwqe/card_dev.c | 1391 | ||||
| -rw-r--r-- | drivers/misc/genwqe/card_sysfs.c | 295 | ||||
| -rw-r--r-- | drivers/misc/genwqe/card_utils.c | 1049 | ||||
| -rw-r--r-- | drivers/misc/genwqe/genwqe_driver.h | 69 |
11 files changed, 6777 insertions, 0 deletions
diff --git a/drivers/misc/genwqe/Kconfig b/drivers/misc/genwqe/Kconfig new file mode 100644 index 000000000..97f64bcf9 --- /dev/null +++ b/drivers/misc/genwqe/Kconfig @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# IBM Accelerator Family 'GenWQE' +# + +menuconfig GENWQE + tristate "GenWQE PCIe Accelerator" + depends on PCI && 64BIT + select CRC_ITU_T + help + Enables PCIe card driver for IBM GenWQE accelerators. + The user-space interface is described in + include/linux/genwqe/genwqe_card.h. + +config GENWQE_PLATFORM_ERROR_RECOVERY + int "Use platform recovery procedures (0=off, 1=on)" + depends on GENWQE + default 1 if PPC64 + default 0 diff --git a/drivers/misc/genwqe/Makefile b/drivers/misc/genwqe/Makefile new file mode 100644 index 000000000..d9811ecbe --- /dev/null +++ b/drivers/misc/genwqe/Makefile @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Makefile for GenWQE driver +# + +obj-$(CONFIG_GENWQE) := genwqe_card.o +genwqe_card-objs := card_base.o card_dev.o card_ddcb.o card_sysfs.o \ + card_debugfs.o card_utils.o diff --git a/drivers/misc/genwqe/card_base.c b/drivers/misc/genwqe/card_base.c new file mode 100644 index 000000000..693981891 --- /dev/null +++ b/drivers/misc/genwqe/card_base.c @@ -0,0 +1,1401 @@ +// SPDX-License-Identifier: GPL-2.0-only +/** + * IBM Accelerator Family 'GenWQE' + * + * (C) Copyright IBM Corp. 2013 + * + * Author: Frank Haverkamp <haver@linux.vnet.ibm.com> + * Author: Joerg-Stephan Vogt <jsvogt@de.ibm.com> + * Author: Michael Jung <mijung@gmx.net> + * Author: Michael Ruettger <michael@ibmra.de> + */ + +/* + * Module initialization and PCIe setup. Card health monitoring and + * recovery functionality. Character device creation and deletion are + * controlled from here. + */ + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/err.h> +#include <linux/aer.h> +#include <linux/string.h> +#include <linux/sched.h> +#include <linux/wait.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/module.h> +#include <linux/notifier.h> +#include <linux/device.h> +#include <linux/log2.h> + +#include "card_base.h" +#include "card_ddcb.h" + +MODULE_AUTHOR("Frank Haverkamp <haver@linux.vnet.ibm.com>"); +MODULE_AUTHOR("Michael Ruettger <michael@ibmra.de>"); +MODULE_AUTHOR("Joerg-Stephan Vogt <jsvogt@de.ibm.com>"); +MODULE_AUTHOR("Michael Jung <mijung@gmx.net>"); + +MODULE_DESCRIPTION("GenWQE Card"); +MODULE_VERSION(DRV_VERSION); +MODULE_LICENSE("GPL"); + +static char genwqe_driver_name[] = GENWQE_DEVNAME; +static struct class *class_genwqe; +static struct dentry *debugfs_genwqe; +static struct genwqe_dev *genwqe_devices[GENWQE_CARD_NO_MAX]; + +/* PCI structure for identifying device by PCI vendor and device ID */ +static const struct pci_device_id genwqe_device_table[] = { + { .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_GENWQE, + .subvendor = PCI_SUBVENDOR_ID_IBM, + .subdevice = PCI_SUBSYSTEM_ID_GENWQE5, + .class = (PCI_CLASSCODE_GENWQE5 << 8), + .class_mask = ~0, + .driver_data = 0 }, + + /* Initial SR-IOV bring-up image */ + { .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_GENWQE, + .subvendor = PCI_SUBVENDOR_ID_IBM_SRIOV, + .subdevice = PCI_SUBSYSTEM_ID_GENWQE5_SRIOV, + .class = (PCI_CLASSCODE_GENWQE5_SRIOV << 8), + .class_mask = ~0, + .driver_data = 0 }, + + { .vendor = PCI_VENDOR_ID_IBM, /* VF Vendor ID */ + .device = 0x0000, /* VF Device ID */ + .subvendor = PCI_SUBVENDOR_ID_IBM_SRIOV, + .subdevice = PCI_SUBSYSTEM_ID_GENWQE5_SRIOV, + .class = (PCI_CLASSCODE_GENWQE5_SRIOV << 8), + .class_mask = ~0, + .driver_data = 0 }, + + /* Fixed up image */ + { .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_GENWQE, + .subvendor = PCI_SUBVENDOR_ID_IBM_SRIOV, + .subdevice = PCI_SUBSYSTEM_ID_GENWQE5, + .class = (PCI_CLASSCODE_GENWQE5_SRIOV << 8), + .class_mask = ~0, + .driver_data = 0 }, + + { .vendor = PCI_VENDOR_ID_IBM, /* VF Vendor ID */ + .device = 0x0000, /* VF Device ID */ + .subvendor = PCI_SUBVENDOR_ID_IBM_SRIOV, + .subdevice = PCI_SUBSYSTEM_ID_GENWQE5, + .class = (PCI_CLASSCODE_GENWQE5_SRIOV << 8), + .class_mask = ~0, + .driver_data = 0 }, + + /* Even one more ... */ + { .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_GENWQE, + .subvendor = PCI_SUBVENDOR_ID_IBM, + .subdevice = PCI_SUBSYSTEM_ID_GENWQE5_NEW, + .class = (PCI_CLASSCODE_GENWQE5 << 8), + .class_mask = ~0, + .driver_data = 0 }, + + { 0, } /* 0 terminated list. */ +}; + +MODULE_DEVICE_TABLE(pci, genwqe_device_table); + +/** + * genwqe_dev_alloc() - Create and prepare a new card descriptor + * + * Return: Pointer to card descriptor, or ERR_PTR(err) on error + */ +static struct genwqe_dev *genwqe_dev_alloc(void) +{ + unsigned int i = 0, j; + struct genwqe_dev *cd; + + for (i = 0; i < GENWQE_CARD_NO_MAX; i++) { + if (genwqe_devices[i] == NULL) + break; + } + if (i >= GENWQE_CARD_NO_MAX) + return ERR_PTR(-ENODEV); + + cd = kzalloc(sizeof(struct genwqe_dev), GFP_KERNEL); + if (!cd) + return ERR_PTR(-ENOMEM); + + cd->card_idx = i; + cd->class_genwqe = class_genwqe; + cd->debugfs_genwqe = debugfs_genwqe; + + /* + * This comes from kernel config option and can be overritten via + * debugfs. + */ + cd->use_platform_recovery = CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY; + + init_waitqueue_head(&cd->queue_waitq); + + spin_lock_init(&cd->file_lock); + INIT_LIST_HEAD(&cd->file_list); + + cd->card_state = GENWQE_CARD_UNUSED; + spin_lock_init(&cd->print_lock); + + cd->ddcb_software_timeout = GENWQE_DDCB_SOFTWARE_TIMEOUT; + cd->kill_timeout = GENWQE_KILL_TIMEOUT; + + for (j = 0; j < GENWQE_MAX_VFS; j++) + cd->vf_jobtimeout_msec[j] = GENWQE_VF_JOBTIMEOUT_MSEC; + + genwqe_devices[i] = cd; + return cd; +} + +static void genwqe_dev_free(struct genwqe_dev *cd) +{ + if (!cd) + return; + + genwqe_devices[cd->card_idx] = NULL; + kfree(cd); +} + +/** + * genwqe_bus_reset() - Card recovery + * @cd: GenWQE device information + * + * pci_reset_function() will recover the device and ensure that the + * registers are accessible again when it completes with success. If + * not, the card will stay dead and registers will be unaccessible + * still. + */ +static int genwqe_bus_reset(struct genwqe_dev *cd) +{ + int rc = 0; + struct pci_dev *pci_dev = cd->pci_dev; + void __iomem *mmio; + + if (cd->err_inject & GENWQE_INJECT_BUS_RESET_FAILURE) + return -EIO; + + mmio = cd->mmio; + cd->mmio = NULL; + pci_iounmap(pci_dev, mmio); + + pci_release_mem_regions(pci_dev); + + /* + * Firmware/BIOS might change memory mapping during bus reset. + * Settings like enable bus-mastering, ... are backuped and + * restored by the pci_reset_function(). + */ + dev_dbg(&pci_dev->dev, "[%s] pci_reset function ...\n", __func__); + rc = pci_reset_function(pci_dev); + if (rc) { + dev_err(&pci_dev->dev, + "[%s] err: failed reset func (rc %d)\n", __func__, rc); + return rc; + } + dev_dbg(&pci_dev->dev, "[%s] done with rc=%d\n", __func__, rc); + + /* + * Here is the right spot to clear the register read + * failure. pci_bus_reset() does this job in real systems. + */ + cd->err_inject &= ~(GENWQE_INJECT_HARDWARE_FAILURE | + GENWQE_INJECT_GFIR_FATAL | + GENWQE_INJECT_GFIR_INFO); + + rc = pci_request_mem_regions(pci_dev, genwqe_driver_name); + if (rc) { + dev_err(&pci_dev->dev, + "[%s] err: request bars failed (%d)\n", __func__, rc); + return -EIO; + } + + cd->mmio = pci_iomap(pci_dev, 0, 0); + if (cd->mmio == NULL) { + dev_err(&pci_dev->dev, + "[%s] err: mapping BAR0 failed\n", __func__); + return -ENOMEM; + } + return 0; +} + +/* + * Hardware circumvention section. Certain bitstreams in our test-lab + * had different kinds of problems. Here is where we adjust those + * bitstreams to function will with this version of our device driver. + * + * Thise circumventions are applied to the physical function only. + * The magical numbers below are identifying development/manufacturing + * versions of the bitstream used on the card. + * + * Turn off error reporting for old/manufacturing images. + */ + +bool genwqe_need_err_masking(struct genwqe_dev *cd) +{ + return (cd->slu_unitcfg & 0xFFFF0ull) < 0x32170ull; +} + +static void genwqe_tweak_hardware(struct genwqe_dev *cd) +{ + struct pci_dev *pci_dev = cd->pci_dev; + + /* Mask FIRs for development images */ + if (((cd->slu_unitcfg & 0xFFFF0ull) >= 0x32000ull) && + ((cd->slu_unitcfg & 0xFFFF0ull) <= 0x33250ull)) { + dev_warn(&pci_dev->dev, + "FIRs masked due to bitstream %016llx.%016llx\n", + cd->slu_unitcfg, cd->app_unitcfg); + + __genwqe_writeq(cd, IO_APP_SEC_LEM_DEBUG_OVR, + 0xFFFFFFFFFFFFFFFFull); + + __genwqe_writeq(cd, IO_APP_ERR_ACT_MASK, + 0x0000000000000000ull); + } +} + +/** + * genwqe_recovery_on_fatal_gfir_required() - Version depended actions + * @cd: GenWQE device information + * + * Bitstreams older than 2013-02-17 have a bug where fatal GFIRs must + * be ignored. This is e.g. true for the bitstream we gave to the card + * manufacturer, but also for some old bitstreams we released to our + * test-lab. + */ +int genwqe_recovery_on_fatal_gfir_required(struct genwqe_dev *cd) +{ + return (cd->slu_unitcfg & 0xFFFF0ull) >= 0x32170ull; +} + +int genwqe_flash_readback_fails(struct genwqe_dev *cd) +{ + return (cd->slu_unitcfg & 0xFFFF0ull) < 0x32170ull; +} + +/** + * genwqe_T_psec() - Calculate PF/VF timeout register content + * @cd: GenWQE device information + * + * Note: From a design perspective it turned out to be a bad idea to + * use codes here to specifiy the frequency/speed values. An old + * driver cannot understand new codes and is therefore always a + * problem. Better is to measure out the value or put the + * speed/frequency directly into a register which is always a valid + * value for old as well as for new software. + */ +/* T = 1/f */ +static int genwqe_T_psec(struct genwqe_dev *cd) +{ + u16 speed; /* 1/f -> 250, 200, 166, 175 */ + static const int T[] = { 4000, 5000, 6000, 5714 }; + + speed = (u16)((cd->slu_unitcfg >> 28) & 0x0full); + if (speed >= ARRAY_SIZE(T)) + return -1; /* illegal value */ + + return T[speed]; +} + +/** + * genwqe_setup_pf_jtimer() - Setup PF hardware timeouts for DDCB execution + * @cd: GenWQE device information + * + * Do this _after_ card_reset() is called. Otherwise the values will + * vanish. The settings need to be done when the queues are inactive. + * + * The max. timeout value is 2^(10+x) * T (6ns for 166MHz) * 15/16. + * The min. timeout value is 2^(10+x) * T (6ns for 166MHz) * 14/16. + */ +static bool genwqe_setup_pf_jtimer(struct genwqe_dev *cd) +{ + u32 T = genwqe_T_psec(cd); + u64 x; + + if (GENWQE_PF_JOBTIMEOUT_MSEC == 0) + return false; + + /* PF: large value needed, flash update 2sec per block */ + x = ilog2(GENWQE_PF_JOBTIMEOUT_MSEC * + 16000000000uL/(T * 15)) - 10; + + genwqe_write_vreg(cd, IO_SLC_VF_APPJOB_TIMEOUT, + 0xff00 | (x & 0xff), 0); + return true; +} + +/** + * genwqe_setup_vf_jtimer() - Setup VF hardware timeouts for DDCB execution + * @cd: GenWQE device information + */ +static bool genwqe_setup_vf_jtimer(struct genwqe_dev *cd) +{ + struct pci_dev *pci_dev = cd->pci_dev; + unsigned int vf; + u32 T = genwqe_T_psec(cd); + u64 x; + int totalvfs; + + totalvfs = pci_sriov_get_totalvfs(pci_dev); + if (totalvfs <= 0) + return false; + + for (vf = 0; vf < totalvfs; vf++) { + + if (cd->vf_jobtimeout_msec[vf] == 0) + continue; + + x = ilog2(cd->vf_jobtimeout_msec[vf] * + 16000000000uL/(T * 15)) - 10; + + genwqe_write_vreg(cd, IO_SLC_VF_APPJOB_TIMEOUT, + 0xff00 | (x & 0xff), vf + 1); + } + return true; +} + +static int genwqe_ffdc_buffs_alloc(struct genwqe_dev *cd) +{ + unsigned int type, e = 0; + + for (type = 0; type < GENWQE_DBG_UNITS; type++) { + switch (type) { + case GENWQE_DBG_UNIT0: + e = genwqe_ffdc_buff_size(cd, 0); + break; + case GENWQE_DBG_UNIT1: + e = genwqe_ffdc_buff_size(cd, 1); + break; + case GENWQE_DBG_UNIT2: + e = genwqe_ffdc_buff_size(cd, 2); + break; + case GENWQE_DBG_REGS: + e = GENWQE_FFDC_REGS; + break; + } + + /* currently support only the debug units mentioned here */ + cd->ffdc[type].entries = e; + cd->ffdc[type].regs = + kmalloc_array(e, sizeof(struct genwqe_reg), + GFP_KERNEL); + /* + * regs == NULL is ok, the using code treats this as no regs, + * Printing warning is ok in this case. + */ + } + return 0; +} + +static void genwqe_ffdc_buffs_free(struct genwqe_dev *cd) +{ + unsigned int type; + + for (type = 0; type < GENWQE_DBG_UNITS; type++) { + kfree(cd->ffdc[type].regs); + cd->ffdc[type].regs = NULL; + } +} + +static int genwqe_read_ids(struct genwqe_dev *cd) +{ + int err = 0; + int slu_id; + struct pci_dev *pci_dev = cd->pci_dev; + + cd->slu_unitcfg = __genwqe_readq(cd, IO_SLU_UNITCFG); + if (cd->slu_unitcfg == IO_ILLEGAL_VALUE) { + dev_err(&pci_dev->dev, + "err: SLUID=%016llx\n", cd->slu_unitcfg); + err = -EIO; + goto out_err; + } + + slu_id = genwqe_get_slu_id(cd); + if (slu_id < GENWQE_SLU_ARCH_REQ || slu_id == 0xff) { + dev_err(&pci_dev->dev, + "err: incompatible SLU Architecture %u\n", slu_id); + err = -ENOENT; + goto out_err; + } + + cd->app_unitcfg = __genwqe_readq(cd, IO_APP_UNITCFG); + if (cd->app_unitcfg == IO_ILLEGAL_VALUE) { + dev_err(&pci_dev->dev, + "err: APPID=%016llx\n", cd->app_unitcfg); + err = -EIO; + goto out_err; + } + genwqe_read_app_id(cd, cd->app_name, sizeof(cd->app_name)); + + /* + * Is access to all registers possible? If we are a VF the + * answer is obvious. If we run fully virtualized, we need to + * check if we can access all registers. If we do not have + * full access we will cause an UR and some informational FIRs + * in the PF, but that should not harm. + */ + if (pci_dev->is_virtfn) + cd->is_privileged = 0; + else + cd->is_privileged = (__genwqe_readq(cd, IO_SLU_BITSTREAM) + != IO_ILLEGAL_VALUE); + + out_err: + return err; +} + +static int genwqe_start(struct genwqe_dev *cd) +{ + int err; + struct pci_dev *pci_dev = cd->pci_dev; + + err = genwqe_read_ids(cd); + if (err) + return err; + + if (genwqe_is_privileged(cd)) { + /* do this after the tweaks. alloc fail is acceptable */ + genwqe_ffdc_buffs_alloc(cd); + genwqe_stop_traps(cd); + + /* Collect registers e.g. FIRs, UNITIDs, traces ... */ + genwqe_read_ffdc_regs(cd, cd->ffdc[GENWQE_DBG_REGS].regs, + cd->ffdc[GENWQE_DBG_REGS].entries, 0); + + genwqe_ffdc_buff_read(cd, GENWQE_DBG_UNIT0, + cd->ffdc[GENWQE_DBG_UNIT0].regs, + cd->ffdc[GENWQE_DBG_UNIT0].entries); + + genwqe_ffdc_buff_read(cd, GENWQE_DBG_UNIT1, + cd->ffdc[GENWQE_DBG_UNIT1].regs, + cd->ffdc[GENWQE_DBG_UNIT1].entries); + + genwqe_ffdc_buff_read(cd, GENWQE_DBG_UNIT2, + cd->ffdc[GENWQE_DBG_UNIT2].regs, + cd->ffdc[GENWQE_DBG_UNIT2].entries); + + genwqe_start_traps(cd); + + if (cd->card_state == GENWQE_CARD_FATAL_ERROR) { + dev_warn(&pci_dev->dev, + "[%s] chip reload/recovery!\n", __func__); + + /* + * Stealth Mode: Reload chip on either hot + * reset or PERST. + */ + cd->softreset = 0x7Cull; + __genwqe_writeq(cd, IO_SLC_CFGREG_SOFTRESET, + cd->softreset); + + err = genwqe_bus_reset(cd); + if (err != 0) { + dev_err(&pci_dev->dev, + "[%s] err: bus reset failed!\n", + __func__); + goto out; + } + + /* + * Re-read the IDs because + * it could happen that the bitstream load + * failed! + */ + err = genwqe_read_ids(cd); + if (err) + goto out; + } + } + + err = genwqe_setup_service_layer(cd); /* does a reset to the card */ + if (err != 0) { + dev_err(&pci_dev->dev, + "[%s] err: could not setup servicelayer!\n", __func__); + err = -ENODEV; + goto out; + } + + if (genwqe_is_privileged(cd)) { /* code is running _after_ reset */ + genwqe_tweak_hardware(cd); + + genwqe_setup_pf_jtimer(cd); + genwqe_setup_vf_jtimer(cd); + } + + err = genwqe_device_create(cd); + if (err < 0) { + dev_err(&pci_dev->dev, + "err: chdev init failed! (err=%d)\n", err); + goto out_release_service_layer; + } + return 0; + + out_release_service_layer: + genwqe_release_service_layer(cd); + out: + if (genwqe_is_privileged(cd)) + genwqe_ffdc_buffs_free(cd); + return -EIO; +} + +/** + * genwqe_stop() - Stop card operation + * @cd: GenWQE device information + * + * Recovery notes: + * As long as genwqe_thread runs we might access registers during + * error data capture. Same is with the genwqe_health_thread. + * When genwqe_bus_reset() fails this function might called two times: + * first by the genwqe_health_thread() and later by genwqe_remove() to + * unbind the device. We must be able to survive that. + * + * This function must be robust enough to be called twice. + */ +static int genwqe_stop(struct genwqe_dev *cd) +{ + genwqe_finish_queue(cd); /* no register access */ + genwqe_device_remove(cd); /* device removed, procs killed */ + genwqe_release_service_layer(cd); /* here genwqe_thread is stopped */ + + if (genwqe_is_privileged(cd)) { + pci_disable_sriov(cd->pci_dev); /* access pci config space */ + genwqe_ffdc_buffs_free(cd); + } + + return 0; +} + +/** + * genwqe_recover_card() - Try to recover the card if it is possible + * @cd: GenWQE device information + * @fatal_err: Indicate whether to attempt soft reset + * + * If fatal_err is set no register access is possible anymore. It is + * likely that genwqe_start fails in that situation. Proper error + * handling is required in this case. + * + * genwqe_bus_reset() will cause the pci code to call genwqe_remove() + * and later genwqe_probe() for all virtual functions. + */ +static int genwqe_recover_card(struct genwqe_dev *cd, int fatal_err) +{ + int rc; + struct pci_dev *pci_dev = cd->pci_dev; + + genwqe_stop(cd); + + /* + * Make sure chip is not reloaded to maintain FFDC. Write SLU + * Reset Register, CPLDReset field to 0. + */ + if (!fatal_err) { + cd->softreset = 0x70ull; + __genwqe_writeq(cd, IO_SLC_CFGREG_SOFTRESET, cd->softreset); + } + + rc = genwqe_bus_reset(cd); + if (rc != 0) { + dev_err(&pci_dev->dev, + "[%s] err: card recovery impossible!\n", __func__); + return rc; + } + + rc = genwqe_start(cd); + if (rc < 0) { + dev_err(&pci_dev->dev, + "[%s] err: failed to launch device!\n", __func__); + return rc; + } + return 0; +} + +static int genwqe_health_check_cond(struct genwqe_dev *cd, u64 *gfir) +{ + *gfir = __genwqe_readq(cd, IO_SLC_CFGREG_GFIR); + return (*gfir & GFIR_ERR_TRIGGER) && + genwqe_recovery_on_fatal_gfir_required(cd); +} + +/** + * genwqe_fir_checking() - Check the fault isolation registers of the card + * @cd: GenWQE device information + * + * If this code works ok, can be tried out with help of the genwqe_poke tool: + * sudo ./tools/genwqe_poke 0x8 0xfefefefefef + * + * Now the relevant FIRs/sFIRs should be printed out and the driver should + * invoke recovery (devices are removed and readded). + */ +static u64 genwqe_fir_checking(struct genwqe_dev *cd) +{ + int j, iterations = 0; + u64 mask, fir, fec, uid, gfir, gfir_masked, sfir, sfec; + u32 fir_addr, fir_clr_addr, fec_addr, sfir_addr, sfec_addr; + struct pci_dev *pci_dev = cd->pci_dev; + + healthMonitor: + iterations++; + if (iterations > 16) { + dev_err(&pci_dev->dev, "* exit looping after %d times\n", + iterations); + goto fatal_error; + } + + gfir = __genwqe_readq(cd, IO_SLC_CFGREG_GFIR); + if (gfir != 0x0) + dev_err(&pci_dev->dev, "* 0x%08x 0x%016llx\n", + IO_SLC_CFGREG_GFIR, gfir); + if (gfir == IO_ILLEGAL_VALUE) + goto fatal_error; + + /* + * Avoid printing when to GFIR bit is on prevents contignous + * printout e.g. for the following bug: + * FIR set without a 2ndary FIR/FIR cannot be cleared + * Comment out the following if to get the prints: + */ + if (gfir == 0) + return 0; + + gfir_masked = gfir & GFIR_ERR_TRIGGER; /* fatal errors */ + + for (uid = 0; uid < GENWQE_MAX_UNITS; uid++) { /* 0..2 in zEDC */ + + /* read the primary FIR (pfir) */ + fir_addr = (uid << 24) + 0x08; + fir = __genwqe_readq(cd, fir_addr); + if (fir == 0x0) + continue; /* no error in this unit */ + + dev_err(&pci_dev->dev, "* 0x%08x 0x%016llx\n", fir_addr, fir); + if (fir == IO_ILLEGAL_VALUE) + goto fatal_error; + + /* read primary FEC */ + fec_addr = (uid << 24) + 0x18; + fec = __genwqe_readq(cd, fec_addr); + + dev_err(&pci_dev->dev, "* 0x%08x 0x%016llx\n", fec_addr, fec); + if (fec == IO_ILLEGAL_VALUE) + goto fatal_error; + + for (j = 0, mask = 1ULL; j < 64; j++, mask <<= 1) { + + /* secondary fir empty, skip it */ + if ((fir & mask) == 0x0) + continue; + + sfir_addr = (uid << 24) + 0x100 + 0x08 * j; + sfir = __genwqe_readq(cd, sfir_addr); + + if (sfir == IO_ILLEGAL_VALUE) + goto fatal_error; + dev_err(&pci_dev->dev, + "* 0x%08x 0x%016llx\n", sfir_addr, sfir); + + sfec_addr = (uid << 24) + 0x300 + 0x08 * j; + sfec = __genwqe_readq(cd, sfec_addr); + + if (sfec == IO_ILLEGAL_VALUE) + goto fatal_error; + dev_err(&pci_dev->dev, + "* 0x%08x 0x%016llx\n", sfec_addr, sfec); + + gfir = __genwqe_readq(cd, IO_SLC_CFGREG_GFIR); + if (gfir == IO_ILLEGAL_VALUE) + goto fatal_error; + + /* gfir turned on during routine! get out and + start over. */ + if ((gfir_masked == 0x0) && + (gfir & GFIR_ERR_TRIGGER)) { + goto healthMonitor; + } + + /* do not clear if we entered with a fatal gfir */ + if (gfir_masked == 0x0) { + + /* NEW clear by mask the logged bits */ + sfir_addr = (uid << 24) + 0x100 + 0x08 * j; + __genwqe_writeq(cd, sfir_addr, sfir); + + dev_dbg(&pci_dev->dev, + "[HM] Clearing 2ndary FIR 0x%08x with 0x%016llx\n", + sfir_addr, sfir); + + /* + * note, these cannot be error-Firs + * since gfir_masked is 0 after sfir + * was read. Also, it is safe to do + * this write if sfir=0. Still need to + * clear the primary. This just means + * there is no secondary FIR. + */ + + /* clear by mask the logged bit. */ + fir_clr_addr = (uid << 24) + 0x10; + __genwqe_writeq(cd, fir_clr_addr, mask); + + dev_dbg(&pci_dev->dev, + "[HM] Clearing primary FIR 0x%08x with 0x%016llx\n", + fir_clr_addr, mask); + } + } + } + gfir = __genwqe_readq(cd, IO_SLC_CFGREG_GFIR); + if (gfir == IO_ILLEGAL_VALUE) + goto fatal_error; + + if ((gfir_masked == 0x0) && (gfir & GFIR_ERR_TRIGGER)) { + /* + * Check once more that it didn't go on after all the + * FIRS were cleared. + */ + dev_dbg(&pci_dev->dev, "ACK! Another FIR! Recursing %d!\n", + iterations); + goto healthMonitor; + } + return gfir_masked; + + fatal_error: + return IO_ILLEGAL_VALUE; +} + +/** + * genwqe_pci_fundamental_reset() - trigger a PCIe fundamental reset on the slot + * @pci_dev: PCI device information struct + * + * Note: pci_set_pcie_reset_state() is not implemented on all archs, so this + * reset method will not work in all cases. + * + * Return: 0 on success or error code from pci_set_pcie_reset_state() + */ +static int genwqe_pci_fundamental_reset(struct pci_dev *pci_dev) +{ + int rc; + + /* + * lock pci config space access from userspace, + * save state and issue PCIe fundamental reset + */ + pci_cfg_access_lock(pci_dev); + pci_save_state(pci_dev); + rc = pci_set_pcie_reset_state(pci_dev, pcie_warm_reset); + if (!rc) { + /* keep PCIe reset asserted for 250ms */ + msleep(250); + pci_set_pcie_reset_state(pci_dev, pcie_deassert_reset); + /* Wait for 2s to reload flash and train the link */ + msleep(2000); + } + pci_restore_state(pci_dev); + pci_cfg_access_unlock(pci_dev); + return rc; +} + + +static int genwqe_platform_recovery(struct genwqe_dev *cd) +{ + struct pci_dev *pci_dev = cd->pci_dev; + int rc; + + dev_info(&pci_dev->dev, + "[%s] resetting card for error recovery\n", __func__); + + /* Clear out error injection flags */ + cd->err_inject &= ~(GENWQE_INJECT_HARDWARE_FAILURE | + GENWQE_INJECT_GFIR_FATAL | + GENWQE_INJECT_GFIR_INFO); + + genwqe_stop(cd); + + /* Try recoverying the card with fundamental reset */ + rc = genwqe_pci_fundamental_reset(pci_dev); + if (!rc) { + rc = genwqe_start(cd); + if (!rc) + dev_info(&pci_dev->dev, + "[%s] card recovered\n", __func__); + else + dev_err(&pci_dev->dev, + "[%s] err: cannot start card services! (err=%d)\n", + __func__, rc); + } else { + dev_err(&pci_dev->dev, + "[%s] card reset failed\n", __func__); + } + + return rc; +} + +/** + * genwqe_reload_bistream() - reload card bitstream + * @cd: GenWQE device information + * + * Set the appropriate register and call fundamental reset to reaload the card + * bitstream. + * + * Return: 0 on success, error code otherwise + */ +static int genwqe_reload_bistream(struct genwqe_dev *cd) +{ + struct pci_dev *pci_dev = cd->pci_dev; + int rc; + + dev_info(&pci_dev->dev, + "[%s] resetting card for bitstream reload\n", + __func__); + + genwqe_stop(cd); + + /* + * Cause a CPLD reprogram with the 'next_bitstream' + * partition on PCIe hot or fundamental reset + */ + __genwqe_writeq(cd, IO_SLC_CFGREG_SOFTRESET, + (cd->softreset & 0xcull) | 0x70ull); + + rc = genwqe_pci_fundamental_reset(pci_dev); + if (rc) { + /* + * A fundamental reset failure can be caused + * by lack of support on the arch, so we just + * log the error and try to start the card + * again. + */ + dev_err(&pci_dev->dev, + "[%s] err: failed to reset card for bitstream reload\n", + __func__); + } + + rc = genwqe_start(cd); + if (rc) { + dev_err(&pci_dev->dev, + "[%s] err: cannot start card services! (err=%d)\n", + __func__, rc); + return rc; + } + dev_info(&pci_dev->dev, + "[%s] card reloaded\n", __func__); + return 0; +} + + +/** + * genwqe_health_thread() - Health checking thread + * @data: GenWQE device information + * + * This thread is only started for the PF of the card. + * + * This thread monitors the health of the card. A critical situation + * is when we read registers which contain -1 (IO_ILLEGAL_VALUE). In + * this case we need to be recovered from outside. Writing to + * registers will very likely not work either. + * + * This thread must only exit if kthread_should_stop() becomes true. + * + * Condition for the health-thread to trigger: + * a) when a kthread_stop() request comes in or + * b) a critical GFIR occured + * + * Informational GFIRs are checked and potentially printed in + * GENWQE_HEALTH_CHECK_INTERVAL seconds. + */ +static int genwqe_health_thread(void *data) +{ + int rc, should_stop = 0; + struct genwqe_dev *cd = data; + struct pci_dev *pci_dev = cd->pci_dev; + u64 gfir, gfir_masked, slu_unitcfg, app_unitcfg; + + health_thread_begin: + while (!kthread_should_stop()) { + rc = wait_event_interruptible_timeout(cd->health_waitq, + (genwqe_health_check_cond(cd, &gfir) || + (should_stop = kthread_should_stop())), + GENWQE_HEALTH_CHECK_INTERVAL * HZ); + + if (should_stop) + break; + + if (gfir == IO_ILLEGAL_VALUE) { + dev_err(&pci_dev->dev, + "[%s] GFIR=%016llx\n", __func__, gfir); + goto fatal_error; + } + + slu_unitcfg = __genwqe_readq(cd, IO_SLU_UNITCFG); + if (slu_unitcfg == IO_ILLEGAL_VALUE) { + dev_err(&pci_dev->dev, + "[%s] SLU_UNITCFG=%016llx\n", + __func__, slu_unitcfg); + goto fatal_error; + } + + app_unitcfg = __genwqe_readq(cd, IO_APP_UNITCFG); + if (app_unitcfg == IO_ILLEGAL_VALUE) { + dev_err(&pci_dev->dev, + "[%s] APP_UNITCFG=%016llx\n", + __func__, app_unitcfg); + goto fatal_error; + } + + gfir = __genwqe_readq(cd, IO_SLC_CFGREG_GFIR); + if (gfir == IO_ILLEGAL_VALUE) { + dev_err(&pci_dev->dev, + "[%s] %s: GFIR=%016llx\n", __func__, + (gfir & GFIR_ERR_TRIGGER) ? "err" : "info", + gfir); + goto fatal_error; + } + + gfir_masked = genwqe_fir_checking(cd); + if (gfir_masked == IO_ILLEGAL_VALUE) + goto fatal_error; + + /* + * GFIR ErrorTrigger bits set => reset the card! + * Never do this for old/manufacturing images! + */ + if ((gfir_masked) && !cd->skip_recovery && + genwqe_recovery_on_fatal_gfir_required(cd)) { + + cd->card_state = GENWQE_CARD_FATAL_ERROR; + + rc = genwqe_recover_card(cd, 0); + if (rc < 0) { + /* FIXME Card is unusable and needs unbind! */ + goto fatal_error; + } + } + + if (cd->card_state == GENWQE_CARD_RELOAD_BITSTREAM) { + /* Userspace requested card bitstream reload */ + rc = genwqe_reload_bistream(cd); + if (rc) + goto fatal_error; + } + + cd->last_gfir = gfir; + cond_resched(); + } + + return 0; + + fatal_error: + if (cd->use_platform_recovery) { + /* + * Since we use raw accessors, EEH errors won't be detected + * by the platform until we do a non-raw MMIO or config space + * read + */ + readq(cd->mmio + IO_SLC_CFGREG_GFIR); + + /* We do nothing if the card is going over PCI recovery */ + if (pci_channel_offline(pci_dev)) + return -EIO; + + /* + * If it's supported by the platform, we try a fundamental reset + * to recover from a fatal error. Otherwise, we continue to wait + * for an external recovery procedure to take care of it. + */ + rc = genwqe_platform_recovery(cd); + if (!rc) + goto health_thread_begin; + } + + dev_err(&pci_dev->dev, + "[%s] card unusable. Please trigger unbind!\n", __func__); + + /* Bring down logical devices to inform user space via udev remove. */ + cd->card_state = GENWQE_CARD_FATAL_ERROR; + genwqe_stop(cd); + + /* genwqe_bus_reset failed(). Now wait for genwqe_remove(). */ + while (!kthread_should_stop()) + cond_resched(); + + return -EIO; +} + +static int genwqe_health_check_start(struct genwqe_dev *cd) +{ + int rc; + + if (GENWQE_HEALTH_CHECK_INTERVAL <= 0) + return 0; /* valid for disabling the service */ + + /* moved before request_irq() */ + /* init_waitqueue_head(&cd->health_waitq); */ + + cd->health_thread = kthread_run(genwqe_health_thread, cd, + GENWQE_DEVNAME "%d_health", + cd->card_idx); + if (IS_ERR(cd->health_thread)) { + rc = PTR_ERR(cd->health_thread); + cd->health_thread = NULL; + return rc; + } + return 0; +} + +static int genwqe_health_thread_running(struct genwqe_dev *cd) +{ + return cd->health_thread != NULL; +} + +static int genwqe_health_check_stop(struct genwqe_dev *cd) +{ + if (!genwqe_health_thread_running(cd)) + return -EIO; + + kthread_stop(cd->health_thread); + cd->health_thread = NULL; + return 0; +} + +/** + * genwqe_pci_setup() - Allocate PCIe related resources for our card + * @cd: GenWQE device information + */ +static int genwqe_pci_setup(struct genwqe_dev *cd) +{ + int err; + struct pci_dev *pci_dev = cd->pci_dev; + + err = pci_enable_device_mem(pci_dev); + if (err) { + dev_err(&pci_dev->dev, + "err: failed to enable pci memory (err=%d)\n", err); + goto err_out; + } + + /* Reserve PCI I/O and memory resources */ + err = pci_request_mem_regions(pci_dev, genwqe_driver_name); + if (err) { + dev_err(&pci_dev->dev, + "[%s] err: request bars failed (%d)\n", __func__, err); + err = -EIO; + goto err_disable_device; + } + + /* check for 64-bit DMA address supported (DAC) */ + /* check for 32-bit DMA address supported (SAC) */ + if (dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(64)) && + dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(32))) { + dev_err(&pci_dev->dev, + "err: neither DMA32 nor DMA64 supported\n"); + err = -EIO; + goto out_release_resources; + } + + pci_set_master(pci_dev); + pci_enable_pcie_error_reporting(pci_dev); + + /* EEH recovery requires PCIe fundamental reset */ + pci_dev->needs_freset = 1; + + /* request complete BAR-0 space (length = 0) */ + cd->mmio_len = pci_resource_len(pci_dev, 0); + cd->mmio = pci_iomap(pci_dev, 0, 0); + if (cd->mmio == NULL) { + dev_err(&pci_dev->dev, + "[%s] err: mapping BAR0 failed\n", __func__); + err = -ENOMEM; + goto out_release_resources; + } + + cd->num_vfs = pci_sriov_get_totalvfs(pci_dev); + if (cd->num_vfs < 0) + cd->num_vfs = 0; + + err = genwqe_read_ids(cd); + if (err) + goto out_iounmap; + + return 0; + + out_iounmap: + pci_iounmap(pci_dev, cd->mmio); + out_release_resources: + pci_release_mem_regions(pci_dev); + err_disable_device: + pci_disable_device(pci_dev); + err_out: + return err; +} + +/** + * genwqe_pci_remove() - Free PCIe related resources for our card + * @cd: GenWQE device information + */ +static void genwqe_pci_remove(struct genwqe_dev *cd) +{ + struct pci_dev *pci_dev = cd->pci_dev; + + if (cd->mmio) + pci_iounmap(pci_dev, cd->mmio); + + pci_release_mem_regions(pci_dev); + pci_disable_device(pci_dev); +} + +/** + * genwqe_probe() - Device initialization + * @pci_dev: PCI device information struct + * @id: PCI device ID + * + * Callable for multiple cards. This function is called on bind. + * + * Return: 0 if succeeded, < 0 when failed + */ +static int genwqe_probe(struct pci_dev *pci_dev, + const struct pci_device_id *id) +{ + int err; + struct genwqe_dev *cd; + + genwqe_init_crc32(); + + cd = genwqe_dev_alloc(); + if (IS_ERR(cd)) { + dev_err(&pci_dev->dev, "err: could not alloc mem (err=%d)!\n", + (int)PTR_ERR(cd)); + return PTR_ERR(cd); + } + + dev_set_drvdata(&pci_dev->dev, cd); + cd->pci_dev = pci_dev; + + err = genwqe_pci_setup(cd); + if (err < 0) { + dev_err(&pci_dev->dev, + "err: problems with PCI setup (err=%d)\n", err); + goto out_free_dev; + } + + err = genwqe_start(cd); + if (err < 0) { + dev_err(&pci_dev->dev, + "err: cannot start card services! (err=%d)\n", err); + goto out_pci_remove; + } + + if (genwqe_is_privileged(cd)) { + err = genwqe_health_check_start(cd); + if (err < 0) { + dev_err(&pci_dev->dev, + "err: cannot start health checking! (err=%d)\n", + err); + goto out_stop_services; + } + } + return 0; + + out_stop_services: + genwqe_stop(cd); + out_pci_remove: + genwqe_pci_remove(cd); + out_free_dev: + genwqe_dev_free(cd); + return err; +} + +/** + * genwqe_remove() - Called when device is removed (hot-plugable) + * @pci_dev: PCI device information struct + * + * Or when driver is unloaded respecitively when unbind is done. + */ +static void genwqe_remove(struct pci_dev *pci_dev) +{ + struct genwqe_dev *cd = dev_get_drvdata(&pci_dev->dev); + + genwqe_health_check_stop(cd); + + /* + * genwqe_stop() must survive if it is called twice + * sequentially. This happens when the health thread calls it + * and fails on genwqe_bus_reset(). + */ + genwqe_stop(cd); + genwqe_pci_remove(cd); + genwqe_dev_free(cd); +} + +/** + * genwqe_err_error_detected() - Error detection callback + * @pci_dev: PCI device information struct + * @state: PCI channel state + * + * This callback is called by the PCI subsystem whenever a PCI bus + * error is detected. + */ +static pci_ers_result_t genwqe_err_error_detected(struct pci_dev *pci_dev, + pci_channel_state_t state) +{ + struct genwqe_dev *cd; + + dev_err(&pci_dev->dev, "[%s] state=%d\n", __func__, state); + + cd = dev_get_drvdata(&pci_dev->dev); + if (cd == NULL) + return PCI_ERS_RESULT_DISCONNECT; + + /* Stop the card */ + genwqe_health_check_stop(cd); + genwqe_stop(cd); + + /* + * On permanent failure, the PCI code will call device remove + * after the return of this function. + * genwqe_stop() can be called twice. + */ + if (state == pci_channel_io_perm_failure) { + return PCI_ERS_RESULT_DISCONNECT; + } else { + genwqe_pci_remove(cd); + return PCI_ERS_RESULT_NEED_RESET; + } +} + +static pci_ers_result_t genwqe_err_slot_reset(struct pci_dev *pci_dev) +{ + int rc; + struct genwqe_dev *cd = dev_get_drvdata(&pci_dev->dev); + + rc = genwqe_pci_setup(cd); + if (!rc) { + return PCI_ERS_RESULT_RECOVERED; + } else { + dev_err(&pci_dev->dev, + "err: problems with PCI setup (err=%d)\n", rc); + return PCI_ERS_RESULT_DISCONNECT; + } +} + +static pci_ers_result_t genwqe_err_result_none(struct pci_dev *dev) +{ + return PCI_ERS_RESULT_NONE; +} + +static void genwqe_err_resume(struct pci_dev *pci_dev) +{ + int rc; + struct genwqe_dev *cd = dev_get_drvdata(&pci_dev->dev); + + rc = genwqe_start(cd); + if (!rc) { + rc = genwqe_health_check_start(cd); + if (rc) + dev_err(&pci_dev->dev, + "err: cannot start health checking! (err=%d)\n", + rc); + } else { + dev_err(&pci_dev->dev, + "err: cannot start card services! (err=%d)\n", rc); + } +} + +static int genwqe_sriov_configure(struct pci_dev *dev, int numvfs) +{ + int rc; + struct genwqe_dev *cd = dev_get_drvdata(&dev->dev); + + if (numvfs > 0) { + genwqe_setup_vf_jtimer(cd); + rc = pci_enable_sriov(dev, numvfs); + if (rc < 0) + return rc; + return numvfs; + } + if (numvfs == 0) { + pci_disable_sriov(dev); + return 0; + } + return 0; +} + +static const struct pci_error_handlers genwqe_err_handler = { + .error_detected = genwqe_err_error_detected, + .mmio_enabled = genwqe_err_result_none, + .slot_reset = genwqe_err_slot_reset, + .resume = genwqe_err_resume, +}; + +static struct pci_driver genwqe_driver = { + .name = genwqe_driver_name, + .id_table = genwqe_device_table, + .probe = genwqe_probe, + .remove = genwqe_remove, + .sriov_configure = genwqe_sriov_configure, + .err_handler = &genwqe_err_handler, +}; + +/** + * genwqe_devnode() - Set default access mode for genwqe devices. + * @dev: Pointer to device (unused) + * @mode: Carrier to pass-back given mode (permissions) + * + * Default mode should be rw for everybody. Do not change default + * device name. + */ +static char *genwqe_devnode(struct device *dev, umode_t *mode) +{ + if (mode) + *mode = 0666; + return NULL; +} + +/** + * genwqe_init_module() - Driver registration and initialization + */ +static int __init genwqe_init_module(void) +{ + int rc; + + class_genwqe = class_create(THIS_MODULE, GENWQE_DEVNAME); + if (IS_ERR(class_genwqe)) { + pr_err("[%s] create class failed\n", __func__); + return -ENOMEM; + } + + class_genwqe->devnode = genwqe_devnode; + + debugfs_genwqe = debugfs_create_dir(GENWQE_DEVNAME, NULL); + + rc = pci_register_driver(&genwqe_driver); + if (rc != 0) { + pr_err("[%s] pci_reg_driver (rc=%d)\n", __func__, rc); + goto err_out0; + } + + return rc; + + err_out0: + debugfs_remove(debugfs_genwqe); + class_destroy(class_genwqe); + return rc; +} + +/** + * genwqe_exit_module() - Driver exit + */ +static void __exit genwqe_exit_module(void) +{ + pci_unregister_driver(&genwqe_driver); + debugfs_remove(debugfs_genwqe); + class_destroy(class_genwqe); +} + +module_init(genwqe_init_module); +module_exit(genwqe_exit_module); diff --git a/drivers/misc/genwqe/card_base.h b/drivers/misc/genwqe/card_base.h new file mode 100644 index 000000000..0e902977d --- /dev/null +++ b/drivers/misc/genwqe/card_base.h @@ -0,0 +1,577 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef __CARD_BASE_H__ +#define __CARD_BASE_H__ + +/** + * IBM Accelerator Family 'GenWQE' + * + * (C) Copyright IBM Corp. 2013 + * + * Author: Frank Haverkamp <haver@linux.vnet.ibm.com> + * Author: Joerg-Stephan Vogt <jsvogt@de.ibm.com> + * Author: Michael Jung <mijung@gmx.net> + * Author: Michael Ruettger <michael@ibmra.de> + */ + +/* + * Interfaces within the GenWQE module. Defines genwqe_card and + * ddcb_queue as well as ddcb_requ. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/cdev.h> +#include <linux/stringify.h> +#include <linux/pci.h> +#include <linux/semaphore.h> +#include <linux/uaccess.h> +#include <linux/io.h> +#include <linux/debugfs.h> +#include <linux/slab.h> + +#include <linux/genwqe/genwqe_card.h> +#include "genwqe_driver.h" + +#define GENWQE_MSI_IRQS 4 /* Just one supported, no MSIx */ + +#define GENWQE_MAX_VFS 15 /* maximum 15 VFs are possible */ +#define GENWQE_MAX_FUNCS 16 /* 1 PF and 15 VFs */ +#define GENWQE_CARD_NO_MAX (16 * GENWQE_MAX_FUNCS) + +/* Compile parameters, some of them appear in debugfs for later adjustment */ +#define GENWQE_DDCB_MAX 32 /* DDCBs on the work-queue */ +#define GENWQE_POLLING_ENABLED 0 /* in case of irqs not working */ +#define GENWQE_DDCB_SOFTWARE_TIMEOUT 10 /* timeout per DDCB in seconds */ +#define GENWQE_KILL_TIMEOUT 8 /* time until process gets killed */ +#define GENWQE_VF_JOBTIMEOUT_MSEC 250 /* 250 msec */ +#define GENWQE_PF_JOBTIMEOUT_MSEC 8000 /* 8 sec should be ok */ +#define GENWQE_HEALTH_CHECK_INTERVAL 4 /* <= 0: disabled */ + +/* Sysfs attribute groups used when we create the genwqe device */ +extern const struct attribute_group *genwqe_attribute_groups[]; + +/* + * Config space for Genwqe5 A7: + * 00:[14 10 4b 04]40 00 10 00[00 00 00 12]00 00 00 00 + * 10: 0c 00 00 f0 07 3c 00 00 00 00 00 00 00 00 00 00 + * 20: 00 00 00 00 00 00 00 00 00 00 00 00[14 10 4b 04] + * 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 00 00 + */ +#define PCI_DEVICE_GENWQE 0x044b /* Genwqe DeviceID */ + +#define PCI_SUBSYSTEM_ID_GENWQE5 0x035f /* Genwqe A5 Subsystem-ID */ +#define PCI_SUBSYSTEM_ID_GENWQE5_NEW 0x044b /* Genwqe A5 Subsystem-ID */ +#define PCI_CLASSCODE_GENWQE5 0x1200 /* UNKNOWN */ + +#define PCI_SUBVENDOR_ID_IBM_SRIOV 0x0000 +#define PCI_SUBSYSTEM_ID_GENWQE5_SRIOV 0x0000 /* Genwqe A5 Subsystem-ID */ +#define PCI_CLASSCODE_GENWQE5_SRIOV 0x1200 /* UNKNOWN */ + +#define GENWQE_SLU_ARCH_REQ 2 /* Required SLU architecture level */ + +/** + * struct genwqe_reg - Genwqe data dump functionality + */ +struct genwqe_reg { + u32 addr; + u32 idx; + u64 val; +}; + +/* + * enum genwqe_dbg_type - Specify chip unit to dump/debug + */ +enum genwqe_dbg_type { + GENWQE_DBG_UNIT0 = 0, /* captured before prev errs cleared */ + GENWQE_DBG_UNIT1 = 1, + GENWQE_DBG_UNIT2 = 2, + GENWQE_DBG_UNIT3 = 3, + GENWQE_DBG_UNIT4 = 4, + GENWQE_DBG_UNIT5 = 5, + GENWQE_DBG_UNIT6 = 6, + GENWQE_DBG_UNIT7 = 7, + GENWQE_DBG_REGS = 8, + GENWQE_DBG_DMA = 9, + GENWQE_DBG_UNITS = 10, /* max number of possible debug units */ +}; + +/* Software error injection to simulate card failures */ +#define GENWQE_INJECT_HARDWARE_FAILURE 0x00000001 /* injects -1 reg reads */ +#define GENWQE_INJECT_BUS_RESET_FAILURE 0x00000002 /* pci_bus_reset fail */ +#define GENWQE_INJECT_GFIR_FATAL 0x00000004 /* GFIR = 0x0000ffff */ +#define GENWQE_INJECT_GFIR_INFO 0x00000008 /* GFIR = 0xffff0000 */ + +/* + * Genwqe card description and management data. + * + * Error-handling in case of card malfunction + * ------------------------------------------ + * + * If the card is detected to be defective the outside environment + * will cause the PCI layer to call deinit (the cleanup function for + * probe). This is the same effect like doing a unbind/bind operation + * on the card. + * + * The genwqe card driver implements a health checking thread which + * verifies the card function. If this detects a problem the cards + * device is being shutdown and restarted again, along with a reset of + * the card and queue. + * + * All functions accessing the card device return either -EIO or -ENODEV + * code to indicate the malfunction to the user. The user has to close + * the file descriptor and open a new one, once the card becomes + * available again. + * + * If the open file descriptor is setup to receive SIGIO, the signal is + * genereated for the application which has to provide a handler to + * react on it. If the application does not close the open + * file descriptor a SIGKILL is send to enforce freeing the cards + * resources. + * + * I did not find a different way to prevent kernel problems due to + * reference counters for the cards character devices getting out of + * sync. The character device deallocation does not block, even if + * there is still an open file descriptor pending. If this pending + * descriptor is closed, the data structures used by the character + * device is reinstantiated, which will lead to the reference counter + * dropping below the allowed values. + * + * Card recovery + * ------------- + * + * To test the internal driver recovery the following command can be used: + * sudo sh -c 'echo 0xfffff > /sys/class/genwqe/genwqe0_card/err_inject' + */ + + +/** + * struct dma_mapping_type - Mapping type definition + * + * To avoid memcpying data arround we use user memory directly. To do + * this we need to pin/swap-in the memory and request a DMA address + * for it. + */ +enum dma_mapping_type { + GENWQE_MAPPING_RAW = 0, /* contignous memory buffer */ + GENWQE_MAPPING_SGL_TEMP, /* sglist dynamically used */ + GENWQE_MAPPING_SGL_PINNED, /* sglist used with pinning */ +}; + +/** + * struct dma_mapping - Information about memory mappings done by the driver + */ +struct dma_mapping { + enum dma_mapping_type type; + + void *u_vaddr; /* user-space vaddr/non-aligned */ + void *k_vaddr; /* kernel-space vaddr/non-aligned */ + dma_addr_t dma_addr; /* physical DMA address */ + + struct page **page_list; /* list of pages used by user buff */ + dma_addr_t *dma_list; /* list of dma addresses per page */ + unsigned int nr_pages; /* number of pages */ + unsigned int size; /* size in bytes */ + + struct list_head card_list; /* list of usr_maps for card */ + struct list_head pin_list; /* list of pinned memory for dev */ + int write; /* writable map? useful in unmapping */ +}; + +static inline void genwqe_mapping_init(struct dma_mapping *m, + enum dma_mapping_type type) +{ + memset(m, 0, sizeof(*m)); + m->type = type; + m->write = 1; /* Assume the maps we create are R/W */ +} + +/** + * struct ddcb_queue - DDCB queue data + * @ddcb_max: Number of DDCBs on the queue + * @ddcb_next: Next free DDCB + * @ddcb_act: Next DDCB supposed to finish + * @ddcb_seq: Sequence number of last DDCB + * @ddcbs_in_flight: Currently enqueued DDCBs + * @ddcbs_completed: Number of already completed DDCBs + * @return_on_busy: Number of -EBUSY returns on full queue + * @wait_on_busy: Number of waits on full queue + * @ddcb_daddr: DMA address of first DDCB in the queue + * @ddcb_vaddr: Kernel virtual address of first DDCB in the queue + * @ddcb_req: Associated requests (one per DDCB) + * @ddcb_waitqs: Associated wait queues (one per DDCB) + * @ddcb_lock: Lock to protect queuing operations + * @ddcb_waitq: Wait on next DDCB finishing + */ + +struct ddcb_queue { + int ddcb_max; /* amount of DDCBs */ + int ddcb_next; /* next available DDCB num */ + int ddcb_act; /* DDCB to be processed */ + u16 ddcb_seq; /* slc seq num */ + unsigned int ddcbs_in_flight; /* number of ddcbs in processing */ + unsigned int ddcbs_completed; + unsigned int ddcbs_max_in_flight; + unsigned int return_on_busy; /* how many times -EBUSY? */ + unsigned int wait_on_busy; + + dma_addr_t ddcb_daddr; /* DMA address */ + struct ddcb *ddcb_vaddr; /* kernel virtual addr for DDCBs */ + struct ddcb_requ **ddcb_req; /* ddcb processing parameter */ + wait_queue_head_t *ddcb_waitqs; /* waitqueue per ddcb */ + + spinlock_t ddcb_lock; /* exclusive access to queue */ + wait_queue_head_t busy_waitq; /* wait for ddcb processing */ + + /* registers or the respective queue to be used */ + u32 IO_QUEUE_CONFIG; + u32 IO_QUEUE_STATUS; + u32 IO_QUEUE_SEGMENT; + u32 IO_QUEUE_INITSQN; + u32 IO_QUEUE_WRAP; + u32 IO_QUEUE_OFFSET; + u32 IO_QUEUE_WTIME; + u32 IO_QUEUE_ERRCNTS; + u32 IO_QUEUE_LRW; +}; + +/* + * GFIR, SLU_UNITCFG, APP_UNITCFG + * 8 Units with FIR/FEC + 64 * 2ndary FIRS/FEC. + */ +#define GENWQE_FFDC_REGS (3 + (8 * (2 + 2 * 64))) + +struct genwqe_ffdc { + unsigned int entries; + struct genwqe_reg *regs; +}; + +/** + * struct genwqe_dev - GenWQE device information + * @card_state: Card operation state, see above + * @ffdc: First Failure Data Capture buffers for each unit + * @card_thread: Working thread to operate the DDCB queue + * @card_waitq: Wait queue used in card_thread + * @queue: DDCB queue + * @health_thread: Card monitoring thread (only for PFs) + * @health_waitq: Wait queue used in health_thread + * @pci_dev: Associated PCI device (function) + * @mmio: Base address of 64-bit register space + * @mmio_len: Length of register area + * @file_lock: Lock to protect access to file_list + * @file_list: List of all processes with open GenWQE file descriptors + * + * This struct contains all information needed to communicate with a + * GenWQE card. It is initialized when a GenWQE device is found and + * destroyed when it goes away. It holds data to maintain the queue as + * well as data needed to feed the user interfaces. + */ +struct genwqe_dev { + enum genwqe_card_state card_state; + spinlock_t print_lock; + + int card_idx; /* card index 0..CARD_NO_MAX-1 */ + u64 flags; /* general flags */ + + /* FFDC data gathering */ + struct genwqe_ffdc ffdc[GENWQE_DBG_UNITS]; + + /* DDCB workqueue */ + struct task_struct *card_thread; + wait_queue_head_t queue_waitq; + struct ddcb_queue queue; /* genwqe DDCB queue */ + unsigned int irqs_processed; + + /* Card health checking thread */ + struct task_struct *health_thread; + wait_queue_head_t health_waitq; + + int use_platform_recovery; /* use platform recovery mechanisms */ + + /* char device */ + dev_t devnum_genwqe; /* major/minor num card */ + struct class *class_genwqe; /* reference to class object */ + struct device *dev; /* for device creation */ + struct cdev cdev_genwqe; /* char device for card */ + + struct dentry *debugfs_root; /* debugfs card root directory */ + struct dentry *debugfs_genwqe; /* debugfs driver root directory */ + + /* pci resources */ + struct pci_dev *pci_dev; /* PCI device */ + void __iomem *mmio; /* BAR-0 MMIO start */ + unsigned long mmio_len; + int num_vfs; + u32 vf_jobtimeout_msec[GENWQE_MAX_VFS]; + int is_privileged; /* access to all regs possible */ + + /* config regs which we need often */ + u64 slu_unitcfg; + u64 app_unitcfg; + u64 softreset; + u64 err_inject; + u64 last_gfir; + char app_name[5]; + + spinlock_t file_lock; /* lock for open files */ + struct list_head file_list; /* list of open files */ + + /* debugfs parameters */ + int ddcb_software_timeout; /* wait until DDCB times out */ + int skip_recovery; /* circumvention if recovery fails */ + int kill_timeout; /* wait after sending SIGKILL */ +}; + +/** + * enum genwqe_requ_state - State of a DDCB execution request + */ +enum genwqe_requ_state { + GENWQE_REQU_NEW = 0, + GENWQE_REQU_ENQUEUED = 1, + GENWQE_REQU_TAPPED = 2, + GENWQE_REQU_FINISHED = 3, + GENWQE_REQU_STATE_MAX, +}; + +/** + * struct genwqe_sgl - Scatter gather list describing user-space memory + * @sgl: scatter gather list needs to be 128 byte aligned + * @sgl_dma_addr: dma address of sgl + * @sgl_size: size of area used for sgl + * @user_addr: user-space address of memory area + * @user_size: size of user-space memory area + * @page: buffer for partial pages if needed + * @page_dma_addr: dma address partial pages + * @write: should we write it back to userspace? + */ +struct genwqe_sgl { + dma_addr_t sgl_dma_addr; + struct sg_entry *sgl; + size_t sgl_size; /* size of sgl */ + + void __user *user_addr; /* user-space base-address */ + size_t user_size; /* size of memory area */ + + int write; + + unsigned long nr_pages; + unsigned long fpage_offs; + size_t fpage_size; + size_t lpage_size; + + void *fpage; + dma_addr_t fpage_dma_addr; + + void *lpage; + dma_addr_t lpage_dma_addr; +}; + +int genwqe_alloc_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl, + void __user *user_addr, size_t user_size, int write); + +int genwqe_setup_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl, + dma_addr_t *dma_list); + +int genwqe_free_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl); + +/** + * struct ddcb_requ - Kernel internal representation of the DDCB request + * @cmd: User space representation of the DDCB execution request + */ +struct ddcb_requ { + /* kernel specific content */ + enum genwqe_requ_state req_state; /* request status */ + int num; /* ddcb_no for this request */ + struct ddcb_queue *queue; /* associated queue */ + + struct dma_mapping dma_mappings[DDCB_FIXUPS]; + struct genwqe_sgl sgls[DDCB_FIXUPS]; + + /* kernel/user shared content */ + struct genwqe_ddcb_cmd cmd; /* ddcb_no for this request */ + struct genwqe_debug_data debug_data; +}; + +/** + * struct genwqe_file - Information for open GenWQE devices + */ +struct genwqe_file { + struct genwqe_dev *cd; + struct genwqe_driver *client; + struct file *filp; + + struct fasync_struct *async_queue; + struct pid *opener; + struct list_head list; /* entry in list of open files */ + + spinlock_t map_lock; /* lock for dma_mappings */ + struct list_head map_list; /* list of dma_mappings */ + + spinlock_t pin_lock; /* lock for pinned memory */ + struct list_head pin_list; /* list of pinned memory */ +}; + +int genwqe_setup_service_layer(struct genwqe_dev *cd); /* for PF only */ +int genwqe_finish_queue(struct genwqe_dev *cd); +int genwqe_release_service_layer(struct genwqe_dev *cd); + +/** + * genwqe_get_slu_id() - Read Service Layer Unit Id + * Return: 0x00: Development code + * 0x01: SLC1 (old) + * 0x02: SLC2 (sept2012) + * 0x03: SLC2 (feb2013, generic driver) + */ +static inline int genwqe_get_slu_id(struct genwqe_dev *cd) +{ + return (int)((cd->slu_unitcfg >> 32) & 0xff); +} + +int genwqe_ddcbs_in_flight(struct genwqe_dev *cd); + +u8 genwqe_card_type(struct genwqe_dev *cd); +int genwqe_card_reset(struct genwqe_dev *cd); +int genwqe_set_interrupt_capability(struct genwqe_dev *cd, int count); +void genwqe_reset_interrupt_capability(struct genwqe_dev *cd); + +int genwqe_device_create(struct genwqe_dev *cd); +int genwqe_device_remove(struct genwqe_dev *cd); + +/* debugfs */ +void genwqe_init_debugfs(struct genwqe_dev *cd); +void genqwe_exit_debugfs(struct genwqe_dev *cd); + +int genwqe_read_softreset(struct genwqe_dev *cd); + +/* Hardware Circumventions */ +int genwqe_recovery_on_fatal_gfir_required(struct genwqe_dev *cd); +int genwqe_flash_readback_fails(struct genwqe_dev *cd); + +/** + * genwqe_write_vreg() - Write register in VF window + * @cd: genwqe device + * @reg: register address + * @val: value to write + * @func: 0: PF, 1: VF0, ..., 15: VF14 + */ +int genwqe_write_vreg(struct genwqe_dev *cd, u32 reg, u64 val, int func); + +/** + * genwqe_read_vreg() - Read register in VF window + * @cd: genwqe device + * @reg: register address + * @func: 0: PF, 1: VF0, ..., 15: VF14 + * + * Return: content of the register + */ +u64 genwqe_read_vreg(struct genwqe_dev *cd, u32 reg, int func); + +/* FFDC Buffer Management */ +int genwqe_ffdc_buff_size(struct genwqe_dev *cd, int unit_id); +int genwqe_ffdc_buff_read(struct genwqe_dev *cd, int unit_id, + struct genwqe_reg *regs, unsigned int max_regs); +int genwqe_read_ffdc_regs(struct genwqe_dev *cd, struct genwqe_reg *regs, + unsigned int max_regs, int all); +int genwqe_ffdc_dump_dma(struct genwqe_dev *cd, + struct genwqe_reg *regs, unsigned int max_regs); + +int genwqe_init_debug_data(struct genwqe_dev *cd, + struct genwqe_debug_data *d); + +void genwqe_init_crc32(void); +int genwqe_read_app_id(struct genwqe_dev *cd, char *app_name, int len); + +/* Memory allocation/deallocation; dma address handling */ +int genwqe_user_vmap(struct genwqe_dev *cd, struct dma_mapping *m, + void *uaddr, unsigned long size); + +int genwqe_user_vunmap(struct genwqe_dev *cd, struct dma_mapping *m); + +static inline bool dma_mapping_used(struct dma_mapping *m) +{ + if (!m) + return false; + return m->size != 0; +} + +/** + * __genwqe_execute_ddcb() - Execute DDCB request with addr translation + * + * This function will do the address translation changes to the DDCBs + * according to the definitions required by the ATS field. It looks up + * the memory allocation buffer or does vmap/vunmap for the respective + * user-space buffers, inclusive page pinning and scatter gather list + * buildup and teardown. + */ +int __genwqe_execute_ddcb(struct genwqe_dev *cd, + struct genwqe_ddcb_cmd *cmd, unsigned int f_flags); + +/** + * __genwqe_execute_raw_ddcb() - Execute DDCB request without addr translation + * + * This version will not do address translation or any modification of + * the DDCB data. It is used e.g. for the MoveFlash DDCB which is + * entirely prepared by the driver itself. That means the appropriate + * DMA addresses are already in the DDCB and do not need any + * modification. + */ +int __genwqe_execute_raw_ddcb(struct genwqe_dev *cd, + struct genwqe_ddcb_cmd *cmd, + unsigned int f_flags); +int __genwqe_enqueue_ddcb(struct genwqe_dev *cd, + struct ddcb_requ *req, + unsigned int f_flags); + +int __genwqe_wait_ddcb(struct genwqe_dev *cd, struct ddcb_requ *req); +int __genwqe_purge_ddcb(struct genwqe_dev *cd, struct ddcb_requ *req); + +/* register access */ +int __genwqe_writeq(struct genwqe_dev *cd, u64 byte_offs, u64 val); +u64 __genwqe_readq(struct genwqe_dev *cd, u64 byte_offs); +int __genwqe_writel(struct genwqe_dev *cd, u64 byte_offs, u32 val); +u32 __genwqe_readl(struct genwqe_dev *cd, u64 byte_offs); + +void *__genwqe_alloc_consistent(struct genwqe_dev *cd, size_t size, + dma_addr_t *dma_handle); +void __genwqe_free_consistent(struct genwqe_dev *cd, size_t size, + void *vaddr, dma_addr_t dma_handle); + +/* Base clock frequency in MHz */ +int genwqe_base_clock_frequency(struct genwqe_dev *cd); + +/* Before FFDC is captured the traps should be stopped. */ +void genwqe_stop_traps(struct genwqe_dev *cd); +void genwqe_start_traps(struct genwqe_dev *cd); + +/* Hardware circumvention */ +bool genwqe_need_err_masking(struct genwqe_dev *cd); + +/** + * genwqe_is_privileged() - Determine operation mode for PCI function + * + * On Intel with SRIOV support we see: + * PF: is_physfn = 1 is_virtfn = 0 + * VF: is_physfn = 0 is_virtfn = 1 + * + * On Systems with no SRIOV support _and_ virtualized systems we get: + * is_physfn = 0 is_virtfn = 0 + * + * Other vendors have individual pci device ids to distinguish between + * virtual function drivers and physical function drivers. GenWQE + * unfortunately has just on pci device id for both, VFs and PF. + * + * The following code is used to distinguish if the card is running in + * privileged mode, either as true PF or in a virtualized system with + * full register access e.g. currently on PowerPC. + * + * if (pci_dev->is_virtfn) + * cd->is_privileged = 0; + * else + * cd->is_privileged = (__genwqe_readq(cd, IO_SLU_BITSTREAM) + * != IO_ILLEGAL_VALUE); + */ +static inline int genwqe_is_privileged(struct genwqe_dev *cd) +{ + return cd->is_privileged; +} + +#endif /* __CARD_BASE_H__ */ diff --git a/drivers/misc/genwqe/card_ddcb.c b/drivers/misc/genwqe/card_ddcb.c new file mode 100644 index 000000000..500b1feaf --- /dev/null +++ b/drivers/misc/genwqe/card_ddcb.c @@ -0,0 +1,1411 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * IBM Accelerator Family 'GenWQE' + * + * (C) Copyright IBM Corp. 2013 + * + * Author: Frank Haverkamp <haver@linux.vnet.ibm.com> + * Author: Joerg-Stephan Vogt <jsvogt@de.ibm.com> + * Author: Michael Jung <mijung@gmx.net> + * Author: Michael Ruettger <michael@ibmra.de> + */ + +/* + * Device Driver Control Block (DDCB) queue support. Definition of + * interrupt handlers for queue support as well as triggering the + * health monitor code in case of problems. The current hardware uses + * an MSI interrupt which is shared between error handling and + * functional code. + */ + +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/wait.h> +#include <linux/pci.h> +#include <linux/string.h> +#include <linux/dma-mapping.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/crc-itu-t.h> + +#include "card_base.h" +#include "card_ddcb.h" + +/* + * N: next DDCB, this is where the next DDCB will be put. + * A: active DDCB, this is where the code will look for the next completion. + * x: DDCB is enqueued, we are waiting for its completion. + + * Situation (1): Empty queue + * +---+---+---+---+---+---+---+---+ + * | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | + * | | | | | | | | | + * +---+---+---+---+---+---+---+---+ + * A/N + * enqueued_ddcbs = A - N = 2 - 2 = 0 + * + * Situation (2): Wrapped, N > A + * +---+---+---+---+---+---+---+---+ + * | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | + * | | | x | x | | | | | + * +---+---+---+---+---+---+---+---+ + * A N + * enqueued_ddcbs = N - A = 4 - 2 = 2 + * + * Situation (3): Queue wrapped, A > N + * +---+---+---+---+---+---+---+---+ + * | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | + * | x | x | | | x | x | x | x | + * +---+---+---+---+---+---+---+---+ + * N A + * enqueued_ddcbs = queue_max - (A - N) = 8 - (4 - 2) = 6 + * + * Situation (4a): Queue full N > A + * +---+---+---+---+---+---+---+---+ + * | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | + * | x | x | x | x | x | x | x | | + * +---+---+---+---+---+---+---+---+ + * A N + * + * enqueued_ddcbs = N - A = 7 - 0 = 7 + * + * Situation (4a): Queue full A > N + * +---+---+---+---+---+---+---+---+ + * | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | + * | x | x | x | | x | x | x | x | + * +---+---+---+---+---+---+---+---+ + * N A + * enqueued_ddcbs = queue_max - (A - N) = 8 - (4 - 3) = 7 + */ + +static int queue_empty(struct ddcb_queue *queue) +{ + return queue->ddcb_next == queue->ddcb_act; +} + +static int queue_enqueued_ddcbs(struct ddcb_queue *queue) +{ + if (queue->ddcb_next >= queue->ddcb_act) + return queue->ddcb_next - queue->ddcb_act; + + return queue->ddcb_max - (queue->ddcb_act - queue->ddcb_next); +} + +static int queue_free_ddcbs(struct ddcb_queue *queue) +{ + int free_ddcbs = queue->ddcb_max - queue_enqueued_ddcbs(queue) - 1; + + if (WARN_ON_ONCE(free_ddcbs < 0)) { /* must never ever happen! */ + return 0; + } + return free_ddcbs; +} + +/* + * Use of the PRIV field in the DDCB for queue debugging: + * + * (1) Trying to get rid of a DDCB which saw a timeout: + * pddcb->priv[6] = 0xcc; # cleared + * + * (2) Append a DDCB via NEXT bit: + * pddcb->priv[7] = 0xaa; # appended + * + * (3) DDCB needed tapping: + * pddcb->priv[7] = 0xbb; # tapped + * + * (4) DDCB marked as correctly finished: + * pddcb->priv[6] = 0xff; # finished + */ + +static inline void ddcb_mark_tapped(struct ddcb *pddcb) +{ + pddcb->priv[7] = 0xbb; /* tapped */ +} + +static inline void ddcb_mark_appended(struct ddcb *pddcb) +{ + pddcb->priv[7] = 0xaa; /* appended */ +} + +static inline void ddcb_mark_cleared(struct ddcb *pddcb) +{ + pddcb->priv[6] = 0xcc; /* cleared */ +} + +static inline void ddcb_mark_finished(struct ddcb *pddcb) +{ + pddcb->priv[6] = 0xff; /* finished */ +} + +static inline void ddcb_mark_unused(struct ddcb *pddcb) +{ + pddcb->priv_64 = cpu_to_be64(0); /* not tapped */ +} + +/** + * genwqe_crc16() - Generate 16-bit crc as required for DDCBs + * @buff: pointer to data buffer + * @len: length of data for calculation + * @init: initial crc (0xffff at start) + * + * Polynomial = x^16 + x^12 + x^5 + 1 (0x1021) + * Example: 4 bytes 0x01 0x02 0x03 0x04 with init = 0xffff + * should result in a crc16 of 0x89c3 + * + * Return: crc16 checksum in big endian format ! + */ +static inline u16 genwqe_crc16(const u8 *buff, size_t len, u16 init) +{ + return crc_itu_t(init, buff, len); +} + +static void print_ddcb_info(struct genwqe_dev *cd, struct ddcb_queue *queue) +{ + int i; + struct ddcb *pddcb; + unsigned long flags; + struct pci_dev *pci_dev = cd->pci_dev; + + spin_lock_irqsave(&cd->print_lock, flags); + + dev_info(&pci_dev->dev, + "DDCB list for card #%d (ddcb_act=%d / ddcb_next=%d):\n", + cd->card_idx, queue->ddcb_act, queue->ddcb_next); + + pddcb = queue->ddcb_vaddr; + for (i = 0; i < queue->ddcb_max; i++) { + dev_err(&pci_dev->dev, + " %c %-3d: RETC=%03x SEQ=%04x HSI=%02X SHI=%02x PRIV=%06llx CMD=%03x\n", + i == queue->ddcb_act ? '>' : ' ', + i, + be16_to_cpu(pddcb->retc_16), + be16_to_cpu(pddcb->seqnum_16), + pddcb->hsi, + pddcb->shi, + be64_to_cpu(pddcb->priv_64), + pddcb->cmd); + pddcb++; + } + spin_unlock_irqrestore(&cd->print_lock, flags); +} + +struct genwqe_ddcb_cmd *ddcb_requ_alloc(void) +{ + struct ddcb_requ *req; + + req = kzalloc(sizeof(*req), GFP_KERNEL); + if (!req) + return NULL; + + return &req->cmd; +} + +void ddcb_requ_free(struct genwqe_ddcb_cmd *cmd) +{ + struct ddcb_requ *req = container_of(cmd, struct ddcb_requ, cmd); + + kfree(req); +} + +static inline enum genwqe_requ_state ddcb_requ_get_state(struct ddcb_requ *req) +{ + return req->req_state; +} + +static inline void ddcb_requ_set_state(struct ddcb_requ *req, + enum genwqe_requ_state new_state) +{ + req->req_state = new_state; +} + +static inline int ddcb_requ_collect_debug_data(struct ddcb_requ *req) +{ + return req->cmd.ddata_addr != 0x0; +} + +/** + * ddcb_requ_finished() - Returns the hardware state of the associated DDCB + * @cd: pointer to genwqe device descriptor + * @req: DDCB work request + * + * Status of ddcb_requ mirrors this hardware state, but is copied in + * the ddcb_requ on interrupt/polling function. The lowlevel code + * should check the hardware state directly, the higher level code + * should check the copy. + * + * This function will also return true if the state of the queue is + * not GENWQE_CARD_USED. This enables us to purge all DDCBs in the + * shutdown case. + */ +static int ddcb_requ_finished(struct genwqe_dev *cd, struct ddcb_requ *req) +{ + return (ddcb_requ_get_state(req) == GENWQE_REQU_FINISHED) || + (cd->card_state != GENWQE_CARD_USED); +} + +#define RET_DDCB_APPENDED 1 +#define RET_DDCB_TAPPED 2 +/** + * enqueue_ddcb() - Enqueue a DDCB + * @cd: pointer to genwqe device descriptor + * @queue: queue this operation should be done on + * @pddcb: pointer to ddcb structure + * @ddcb_no: pointer to ddcb number being tapped + * + * Start execution of DDCB by tapping or append to queue via NEXT + * bit. This is done by an atomic 'compare and swap' instruction and + * checking SHI and HSI of the previous DDCB. + * + * This function must only be called with ddcb_lock held. + * + * Return: 1 if new DDCB is appended to previous + * 2 if DDCB queue is tapped via register/simulation + */ +static int enqueue_ddcb(struct genwqe_dev *cd, struct ddcb_queue *queue, + struct ddcb *pddcb, int ddcb_no) +{ + unsigned int try; + int prev_no; + struct ddcb *prev_ddcb; + __be32 old, new, icrc_hsi_shi; + u64 num; + + /* + * For performance checks a Dispatch Timestamp can be put into + * DDCB It is supposed to use the SLU's free running counter, + * but this requires PCIe cycles. + */ + ddcb_mark_unused(pddcb); + + /* check previous DDCB if already fetched */ + prev_no = (ddcb_no == 0) ? queue->ddcb_max - 1 : ddcb_no - 1; + prev_ddcb = &queue->ddcb_vaddr[prev_no]; + + /* + * It might have happened that the HSI.FETCHED bit is + * set. Retry in this case. Therefore I expect maximum 2 times + * trying. + */ + ddcb_mark_appended(pddcb); + for (try = 0; try < 2; try++) { + old = prev_ddcb->icrc_hsi_shi_32; /* read SHI/HSI in BE32 */ + + /* try to append via NEXT bit if prev DDCB is not completed */ + if ((old & DDCB_COMPLETED_BE32) != 0x00000000) + break; + + new = (old | DDCB_NEXT_BE32); + + wmb(); /* need to ensure write ordering */ + icrc_hsi_shi = cmpxchg(&prev_ddcb->icrc_hsi_shi_32, old, new); + + if (icrc_hsi_shi == old) + return RET_DDCB_APPENDED; /* appended to queue */ + } + + /* Queue must be re-started by updating QUEUE_OFFSET */ + ddcb_mark_tapped(pddcb); + num = (u64)ddcb_no << 8; + + wmb(); /* need to ensure write ordering */ + __genwqe_writeq(cd, queue->IO_QUEUE_OFFSET, num); /* start queue */ + + return RET_DDCB_TAPPED; +} + +/** + * copy_ddcb_results() - Copy output state from real DDCB to request + * @req: pointer to requested DDCB parameters + * @ddcb_no: pointer to ddcb number being tapped + * + * Copy DDCB ASV to request struct. There is no endian + * conversion made, since data structure in ASV is still + * unknown here. + * + * This is needed by: + * - genwqe_purge_ddcb() + * - genwqe_check_ddcb_queue() + */ +static void copy_ddcb_results(struct ddcb_requ *req, int ddcb_no) +{ + struct ddcb_queue *queue = req->queue; + struct ddcb *pddcb = &queue->ddcb_vaddr[req->num]; + + memcpy(&req->cmd.asv[0], &pddcb->asv[0], DDCB_ASV_LENGTH); + + /* copy status flags of the variant part */ + req->cmd.vcrc = be16_to_cpu(pddcb->vcrc_16); + req->cmd.deque_ts = be64_to_cpu(pddcb->deque_ts_64); + req->cmd.cmplt_ts = be64_to_cpu(pddcb->cmplt_ts_64); + + req->cmd.attn = be16_to_cpu(pddcb->attn_16); + req->cmd.progress = be32_to_cpu(pddcb->progress_32); + req->cmd.retc = be16_to_cpu(pddcb->retc_16); + + if (ddcb_requ_collect_debug_data(req)) { + int prev_no = (ddcb_no == 0) ? + queue->ddcb_max - 1 : ddcb_no - 1; + struct ddcb *prev_pddcb = &queue->ddcb_vaddr[prev_no]; + + memcpy(&req->debug_data.ddcb_finished, pddcb, + sizeof(req->debug_data.ddcb_finished)); + memcpy(&req->debug_data.ddcb_prev, prev_pddcb, + sizeof(req->debug_data.ddcb_prev)); + } +} + +/** + * genwqe_check_ddcb_queue() - Checks DDCB queue for completed work requests. + * @cd: pointer to genwqe device descriptor + * @queue: queue to be checked + * + * Return: Number of DDCBs which were finished + */ +static int genwqe_check_ddcb_queue(struct genwqe_dev *cd, + struct ddcb_queue *queue) +{ + unsigned long flags; + int ddcbs_finished = 0; + struct pci_dev *pci_dev = cd->pci_dev; + + spin_lock_irqsave(&queue->ddcb_lock, flags); + + /* FIXME avoid soft locking CPU */ + while (!queue_empty(queue) && (ddcbs_finished < queue->ddcb_max)) { + + struct ddcb *pddcb; + struct ddcb_requ *req; + u16 vcrc, vcrc_16, retc_16; + + pddcb = &queue->ddcb_vaddr[queue->ddcb_act]; + + if ((pddcb->icrc_hsi_shi_32 & DDCB_COMPLETED_BE32) == + 0x00000000) + goto go_home; /* not completed, continue waiting */ + + wmb(); /* Add sync to decouple prev. read operations */ + + /* Note: DDCB could be purged */ + req = queue->ddcb_req[queue->ddcb_act]; + if (req == NULL) { + /* this occurs if DDCB is purged, not an error */ + /* Move active DDCB further; Nothing to do anymore. */ + goto pick_next_one; + } + + /* + * HSI=0x44 (fetched and completed), but RETC is + * 0x101, or even worse 0x000. + * + * In case of seeing the queue in inconsistent state + * we read the errcnts and the queue status to provide + * a trigger for our PCIe analyzer stop capturing. + */ + retc_16 = be16_to_cpu(pddcb->retc_16); + if ((pddcb->hsi == 0x44) && (retc_16 <= 0x101)) { + u64 errcnts, status; + u64 ddcb_offs = (u64)pddcb - (u64)queue->ddcb_vaddr; + + errcnts = __genwqe_readq(cd, queue->IO_QUEUE_ERRCNTS); + status = __genwqe_readq(cd, queue->IO_QUEUE_STATUS); + + dev_err(&pci_dev->dev, + "[%s] SEQN=%04x HSI=%02x RETC=%03x Q_ERRCNTS=%016llx Q_STATUS=%016llx DDCB_DMA_ADDR=%016llx\n", + __func__, be16_to_cpu(pddcb->seqnum_16), + pddcb->hsi, retc_16, errcnts, status, + queue->ddcb_daddr + ddcb_offs); + } + + copy_ddcb_results(req, queue->ddcb_act); + queue->ddcb_req[queue->ddcb_act] = NULL; /* take from queue */ + + dev_dbg(&pci_dev->dev, "FINISHED DDCB#%d\n", req->num); + genwqe_hexdump(pci_dev, pddcb, sizeof(*pddcb)); + + ddcb_mark_finished(pddcb); + + /* calculate CRC_16 to see if VCRC is correct */ + vcrc = genwqe_crc16(pddcb->asv, + VCRC_LENGTH(req->cmd.asv_length), + 0xffff); + vcrc_16 = be16_to_cpu(pddcb->vcrc_16); + if (vcrc != vcrc_16) { + printk_ratelimited(KERN_ERR + "%s %s: err: wrong VCRC pre=%02x vcrc_len=%d bytes vcrc_data=%04x is not vcrc_card=%04x\n", + GENWQE_DEVNAME, dev_name(&pci_dev->dev), + pddcb->pre, VCRC_LENGTH(req->cmd.asv_length), + vcrc, vcrc_16); + } + + ddcb_requ_set_state(req, GENWQE_REQU_FINISHED); + queue->ddcbs_completed++; + queue->ddcbs_in_flight--; + + /* wake up process waiting for this DDCB, and + processes on the busy queue */ + wake_up_interruptible(&queue->ddcb_waitqs[queue->ddcb_act]); + wake_up_interruptible(&queue->busy_waitq); + +pick_next_one: + queue->ddcb_act = (queue->ddcb_act + 1) % queue->ddcb_max; + ddcbs_finished++; + } + + go_home: + spin_unlock_irqrestore(&queue->ddcb_lock, flags); + return ddcbs_finished; +} + +/** + * __genwqe_wait_ddcb(): Waits until DDCB is completed + * @cd: pointer to genwqe device descriptor + * @req: pointer to requsted DDCB parameters + * + * The Service Layer will update the RETC in DDCB when processing is + * pending or done. + * + * Return: > 0 remaining jiffies, DDCB completed + * -ETIMEDOUT when timeout + * -ERESTARTSYS when ^C + * -EINVAL when unknown error condition + * + * When an error is returned the called needs to ensure that + * purge_ddcb() is being called to get the &req removed from the + * queue. + */ +int __genwqe_wait_ddcb(struct genwqe_dev *cd, struct ddcb_requ *req) +{ + int rc; + unsigned int ddcb_no; + struct ddcb_queue *queue; + struct pci_dev *pci_dev = cd->pci_dev; + + if (req == NULL) + return -EINVAL; + + queue = req->queue; + if (queue == NULL) + return -EINVAL; + + ddcb_no = req->num; + if (ddcb_no >= queue->ddcb_max) + return -EINVAL; + + rc = wait_event_interruptible_timeout(queue->ddcb_waitqs[ddcb_no], + ddcb_requ_finished(cd, req), + GENWQE_DDCB_SOFTWARE_TIMEOUT * HZ); + + /* + * We need to distinguish 3 cases here: + * 1. rc == 0 timeout occurred + * 2. rc == -ERESTARTSYS signal received + * 3. rc > 0 remaining jiffies condition is true + */ + if (rc == 0) { + struct ddcb_queue *queue = req->queue; + struct ddcb *pddcb; + + /* + * Timeout may be caused by long task switching time. + * When timeout happens, check if the request has + * meanwhile completed. + */ + genwqe_check_ddcb_queue(cd, req->queue); + if (ddcb_requ_finished(cd, req)) + return rc; + + dev_err(&pci_dev->dev, + "[%s] err: DDCB#%d timeout rc=%d state=%d req @ %p\n", + __func__, req->num, rc, ddcb_requ_get_state(req), + req); + dev_err(&pci_dev->dev, + "[%s] IO_QUEUE_STATUS=0x%016llx\n", __func__, + __genwqe_readq(cd, queue->IO_QUEUE_STATUS)); + + pddcb = &queue->ddcb_vaddr[req->num]; + genwqe_hexdump(pci_dev, pddcb, sizeof(*pddcb)); + + print_ddcb_info(cd, req->queue); + return -ETIMEDOUT; + + } else if (rc == -ERESTARTSYS) { + return rc; + /* + * EINTR: Stops the application + * ERESTARTSYS: Restartable systemcall; called again + */ + + } else if (rc < 0) { + dev_err(&pci_dev->dev, + "[%s] err: DDCB#%d unknown result (rc=%d) %d!\n", + __func__, req->num, rc, ddcb_requ_get_state(req)); + return -EINVAL; + } + + /* Severe error occured. Driver is forced to stop operation */ + if (cd->card_state != GENWQE_CARD_USED) { + dev_err(&pci_dev->dev, + "[%s] err: DDCB#%d forced to stop (rc=%d)\n", + __func__, req->num, rc); + return -EIO; + } + return rc; +} + +/** + * get_next_ddcb() - Get next available DDCB + * @cd: pointer to genwqe device descriptor + * @queue: DDCB queue + * @num: internal DDCB number + * + * DDCB's content is completely cleared but presets for PRE and + * SEQNUM. This function must only be called when ddcb_lock is held. + * + * Return: NULL if no empty DDCB available otherwise ptr to next DDCB. + */ +static struct ddcb *get_next_ddcb(struct genwqe_dev *cd, + struct ddcb_queue *queue, + int *num) +{ + u64 *pu64; + struct ddcb *pddcb; + + if (queue_free_ddcbs(queue) == 0) /* queue is full */ + return NULL; + + /* find new ddcb */ + pddcb = &queue->ddcb_vaddr[queue->ddcb_next]; + + /* if it is not completed, we are not allowed to use it */ + /* barrier(); */ + if ((pddcb->icrc_hsi_shi_32 & DDCB_COMPLETED_BE32) == 0x00000000) + return NULL; + + *num = queue->ddcb_next; /* internal DDCB number */ + queue->ddcb_next = (queue->ddcb_next + 1) % queue->ddcb_max; + + /* clear important DDCB fields */ + pu64 = (u64 *)pddcb; + pu64[0] = 0ULL; /* offs 0x00 (ICRC,HSI,SHI,...) */ + pu64[1] = 0ULL; /* offs 0x01 (ACFUNC,CMD...) */ + + /* destroy previous results in ASV */ + pu64[0x80/8] = 0ULL; /* offs 0x80 (ASV + 0) */ + pu64[0x88/8] = 0ULL; /* offs 0x88 (ASV + 0x08) */ + pu64[0x90/8] = 0ULL; /* offs 0x90 (ASV + 0x10) */ + pu64[0x98/8] = 0ULL; /* offs 0x98 (ASV + 0x18) */ + pu64[0xd0/8] = 0ULL; /* offs 0xd0 (RETC,ATTN...) */ + + pddcb->pre = DDCB_PRESET_PRE; /* 128 */ + pddcb->seqnum_16 = cpu_to_be16(queue->ddcb_seq++); + return pddcb; +} + +/** + * __genwqe_purge_ddcb() - Remove a DDCB from the workqueue + * @cd: genwqe device descriptor + * @req: DDCB request + * + * This will fail when the request was already FETCHED. In this case + * we need to wait until it is finished. Else the DDCB can be + * reused. This function also ensures that the request data structure + * is removed from ddcb_req[]. + * + * Do not forget to call this function when genwqe_wait_ddcb() fails, + * such that the request gets really removed from ddcb_req[]. + * + * Return: 0 success + */ +int __genwqe_purge_ddcb(struct genwqe_dev *cd, struct ddcb_requ *req) +{ + struct ddcb *pddcb = NULL; + unsigned int t; + unsigned long flags; + struct ddcb_queue *queue = req->queue; + struct pci_dev *pci_dev = cd->pci_dev; + u64 queue_status; + __be32 icrc_hsi_shi = 0x0000; + __be32 old, new; + + /* unsigned long flags; */ + if (GENWQE_DDCB_SOFTWARE_TIMEOUT <= 0) { + dev_err(&pci_dev->dev, + "[%s] err: software timeout is not set!\n", __func__); + return -EFAULT; + } + + pddcb = &queue->ddcb_vaddr[req->num]; + + for (t = 0; t < GENWQE_DDCB_SOFTWARE_TIMEOUT * 10; t++) { + + spin_lock_irqsave(&queue->ddcb_lock, flags); + + /* Check if req was meanwhile finished */ + if (ddcb_requ_get_state(req) == GENWQE_REQU_FINISHED) + goto go_home; + + /* try to set PURGE bit if FETCHED/COMPLETED are not set */ + old = pddcb->icrc_hsi_shi_32; /* read SHI/HSI in BE32 */ + if ((old & DDCB_FETCHED_BE32) == 0x00000000) { + + new = (old | DDCB_PURGE_BE32); + icrc_hsi_shi = cmpxchg(&pddcb->icrc_hsi_shi_32, + old, new); + if (icrc_hsi_shi == old) + goto finish_ddcb; + } + + /* normal finish with HSI bit */ + barrier(); + icrc_hsi_shi = pddcb->icrc_hsi_shi_32; + if (icrc_hsi_shi & DDCB_COMPLETED_BE32) + goto finish_ddcb; + + spin_unlock_irqrestore(&queue->ddcb_lock, flags); + + /* + * Here the check_ddcb() function will most likely + * discover this DDCB to be finished some point in + * time. It will mark the req finished and free it up + * in the list. + */ + + copy_ddcb_results(req, req->num); /* for the failing case */ + msleep(100); /* sleep for 1/10 second and try again */ + continue; + +finish_ddcb: + copy_ddcb_results(req, req->num); + ddcb_requ_set_state(req, GENWQE_REQU_FINISHED); + queue->ddcbs_in_flight--; + queue->ddcb_req[req->num] = NULL; /* delete from array */ + ddcb_mark_cleared(pddcb); + + /* Move active DDCB further; Nothing to do here anymore. */ + + /* + * We need to ensure that there is at least one free + * DDCB in the queue. To do that, we must update + * ddcb_act only if the COMPLETED bit is set for the + * DDCB we are working on else we treat that DDCB even + * if we PURGED it as occupied (hardware is supposed + * to set the COMPLETED bit yet!). + */ + icrc_hsi_shi = pddcb->icrc_hsi_shi_32; + if ((icrc_hsi_shi & DDCB_COMPLETED_BE32) && + (queue->ddcb_act == req->num)) { + queue->ddcb_act = ((queue->ddcb_act + 1) % + queue->ddcb_max); + } +go_home: + spin_unlock_irqrestore(&queue->ddcb_lock, flags); + return 0; + } + + /* + * If the card is dead and the queue is forced to stop, we + * might see this in the queue status register. + */ + queue_status = __genwqe_readq(cd, queue->IO_QUEUE_STATUS); + + dev_dbg(&pci_dev->dev, "UN/FINISHED DDCB#%d\n", req->num); + genwqe_hexdump(pci_dev, pddcb, sizeof(*pddcb)); + + dev_err(&pci_dev->dev, + "[%s] err: DDCB#%d not purged and not completed after %d seconds QSTAT=%016llx!!\n", + __func__, req->num, GENWQE_DDCB_SOFTWARE_TIMEOUT, + queue_status); + + print_ddcb_info(cd, req->queue); + + return -EFAULT; +} + +int genwqe_init_debug_data(struct genwqe_dev *cd, struct genwqe_debug_data *d) +{ + int len; + struct pci_dev *pci_dev = cd->pci_dev; + + if (d == NULL) { + dev_err(&pci_dev->dev, + "[%s] err: invalid memory for debug data!\n", + __func__); + return -EFAULT; + } + + len = sizeof(d->driver_version); + snprintf(d->driver_version, len, "%s", DRV_VERSION); + d->slu_unitcfg = cd->slu_unitcfg; + d->app_unitcfg = cd->app_unitcfg; + return 0; +} + +/** + * __genwqe_enqueue_ddcb() - Enqueue a DDCB + * @cd: pointer to genwqe device descriptor + * @req: pointer to DDCB execution request + * @f_flags: file mode: blocking, non-blocking + * + * Return: 0 if enqueuing succeeded + * -EIO if card is unusable/PCIe problems + * -EBUSY if enqueuing failed + */ +int __genwqe_enqueue_ddcb(struct genwqe_dev *cd, struct ddcb_requ *req, + unsigned int f_flags) +{ + struct ddcb *pddcb; + unsigned long flags; + struct ddcb_queue *queue; + struct pci_dev *pci_dev = cd->pci_dev; + u16 icrc; + + retry: + if (cd->card_state != GENWQE_CARD_USED) { + printk_ratelimited(KERN_ERR + "%s %s: [%s] Card is unusable/PCIe problem Req#%d\n", + GENWQE_DEVNAME, dev_name(&pci_dev->dev), + __func__, req->num); + return -EIO; + } + + queue = req->queue = &cd->queue; + + /* FIXME circumvention to improve performance when no irq is + * there. + */ + if (GENWQE_POLLING_ENABLED) + genwqe_check_ddcb_queue(cd, queue); + + /* + * It must be ensured to process all DDCBs in successive + * order. Use a lock here in order to prevent nested DDCB + * enqueuing. + */ + spin_lock_irqsave(&queue->ddcb_lock, flags); + + pddcb = get_next_ddcb(cd, queue, &req->num); /* get ptr and num */ + if (pddcb == NULL) { + int rc; + + spin_unlock_irqrestore(&queue->ddcb_lock, flags); + + if (f_flags & O_NONBLOCK) { + queue->return_on_busy++; + return -EBUSY; + } + + queue->wait_on_busy++; + rc = wait_event_interruptible(queue->busy_waitq, + queue_free_ddcbs(queue) != 0); + dev_dbg(&pci_dev->dev, "[%s] waiting for free DDCB: rc=%d\n", + __func__, rc); + if (rc == -ERESTARTSYS) + return rc; /* interrupted by a signal */ + + goto retry; + } + + if (queue->ddcb_req[req->num] != NULL) { + spin_unlock_irqrestore(&queue->ddcb_lock, flags); + + dev_err(&pci_dev->dev, + "[%s] picked DDCB %d with req=%p still in use!!\n", + __func__, req->num, req); + return -EFAULT; + } + ddcb_requ_set_state(req, GENWQE_REQU_ENQUEUED); + queue->ddcb_req[req->num] = req; + + pddcb->cmdopts_16 = cpu_to_be16(req->cmd.cmdopts); + pddcb->cmd = req->cmd.cmd; + pddcb->acfunc = req->cmd.acfunc; /* functional unit */ + + /* + * We know that we can get retc 0x104 with CRC error, do not + * stop the queue in those cases for this command. XDIR = 1 + * does not work for old SLU versions. + * + * Last bitstream with the old XDIR behavior had SLU_ID + * 0x34199. + */ + if ((cd->slu_unitcfg & 0xFFFF0ull) > 0x34199ull) + pddcb->xdir = 0x1; + else + pddcb->xdir = 0x0; + + + pddcb->psp = (((req->cmd.asiv_length / 8) << 4) | + ((req->cmd.asv_length / 8))); + pddcb->disp_ts_64 = cpu_to_be64(req->cmd.disp_ts); + + /* + * If copying the whole DDCB_ASIV_LENGTH is impacting + * performance we need to change it to + * req->cmd.asiv_length. But simulation benefits from some + * non-architectured bits behind the architectured content. + * + * How much data is copied depends on the availability of the + * ATS field, which was introduced late. If the ATS field is + * supported ASIV is 8 bytes shorter than it used to be. Since + * the ATS field is copied too, the code should do exactly + * what it did before, but I wanted to make copying of the ATS + * field very explicit. + */ + if (genwqe_get_slu_id(cd) <= 0x2) { + memcpy(&pddcb->__asiv[0], /* destination */ + &req->cmd.__asiv[0], /* source */ + DDCB_ASIV_LENGTH); /* req->cmd.asiv_length */ + } else { + pddcb->n.ats_64 = cpu_to_be64(req->cmd.ats); + memcpy(&pddcb->n.asiv[0], /* destination */ + &req->cmd.asiv[0], /* source */ + DDCB_ASIV_LENGTH_ATS); /* req->cmd.asiv_length */ + } + + pddcb->icrc_hsi_shi_32 = cpu_to_be32(0x00000000); /* for crc */ + + /* + * Calculate CRC_16 for corresponding range PSP(7:4). Include + * empty 4 bytes prior to the data. + */ + icrc = genwqe_crc16((const u8 *)pddcb, + ICRC_LENGTH(req->cmd.asiv_length), 0xffff); + pddcb->icrc_hsi_shi_32 = cpu_to_be32((u32)icrc << 16); + + /* enable DDCB completion irq */ + if (!GENWQE_POLLING_ENABLED) + pddcb->icrc_hsi_shi_32 |= DDCB_INTR_BE32; + + dev_dbg(&pci_dev->dev, "INPUT DDCB#%d\n", req->num); + genwqe_hexdump(pci_dev, pddcb, sizeof(*pddcb)); + + if (ddcb_requ_collect_debug_data(req)) { + /* use the kernel copy of debug data. copying back to + user buffer happens later */ + + genwqe_init_debug_data(cd, &req->debug_data); + memcpy(&req->debug_data.ddcb_before, pddcb, + sizeof(req->debug_data.ddcb_before)); + } + + enqueue_ddcb(cd, queue, pddcb, req->num); + queue->ddcbs_in_flight++; + + if (queue->ddcbs_in_flight > queue->ddcbs_max_in_flight) + queue->ddcbs_max_in_flight = queue->ddcbs_in_flight; + + ddcb_requ_set_state(req, GENWQE_REQU_TAPPED); + spin_unlock_irqrestore(&queue->ddcb_lock, flags); + wake_up_interruptible(&cd->queue_waitq); + + return 0; +} + +/** + * __genwqe_execute_raw_ddcb() - Setup and execute DDCB + * @cd: pointer to genwqe device descriptor + * @cmd: user provided DDCB command + * @f_flags: file mode: blocking, non-blocking + */ +int __genwqe_execute_raw_ddcb(struct genwqe_dev *cd, + struct genwqe_ddcb_cmd *cmd, + unsigned int f_flags) +{ + int rc = 0; + struct pci_dev *pci_dev = cd->pci_dev; + struct ddcb_requ *req = container_of(cmd, struct ddcb_requ, cmd); + + if (cmd->asiv_length > DDCB_ASIV_LENGTH) { + dev_err(&pci_dev->dev, "[%s] err: wrong asiv_length of %d\n", + __func__, cmd->asiv_length); + return -EINVAL; + } + if (cmd->asv_length > DDCB_ASV_LENGTH) { + dev_err(&pci_dev->dev, "[%s] err: wrong asv_length of %d\n", + __func__, cmd->asiv_length); + return -EINVAL; + } + rc = __genwqe_enqueue_ddcb(cd, req, f_flags); + if (rc != 0) + return rc; + + rc = __genwqe_wait_ddcb(cd, req); + if (rc < 0) /* error or signal interrupt */ + goto err_exit; + + if (ddcb_requ_collect_debug_data(req)) { + if (copy_to_user((struct genwqe_debug_data __user *) + (unsigned long)cmd->ddata_addr, + &req->debug_data, + sizeof(struct genwqe_debug_data))) + return -EFAULT; + } + + /* + * Higher values than 0x102 indicate completion with faults, + * lower values than 0x102 indicate processing faults. Note + * that DDCB might have been purged. E.g. Cntl+C. + */ + if (cmd->retc != DDCB_RETC_COMPLETE) { + /* This might happen e.g. flash read, and needs to be + handled by the upper layer code. */ + rc = -EBADMSG; /* not processed/error retc */ + } + + return rc; + + err_exit: + __genwqe_purge_ddcb(cd, req); + + if (ddcb_requ_collect_debug_data(req)) { + if (copy_to_user((struct genwqe_debug_data __user *) + (unsigned long)cmd->ddata_addr, + &req->debug_data, + sizeof(struct genwqe_debug_data))) + return -EFAULT; + } + return rc; +} + +/** + * genwqe_next_ddcb_ready() - Figure out if the next DDCB is already finished + * @cd: pointer to genwqe device descriptor + * + * We use this as condition for our wait-queue code. + */ +static int genwqe_next_ddcb_ready(struct genwqe_dev *cd) +{ + unsigned long flags; + struct ddcb *pddcb; + struct ddcb_queue *queue = &cd->queue; + + spin_lock_irqsave(&queue->ddcb_lock, flags); + + if (queue_empty(queue)) { /* empty queue */ + spin_unlock_irqrestore(&queue->ddcb_lock, flags); + return 0; + } + + pddcb = &queue->ddcb_vaddr[queue->ddcb_act]; + if (pddcb->icrc_hsi_shi_32 & DDCB_COMPLETED_BE32) { /* ddcb ready */ + spin_unlock_irqrestore(&queue->ddcb_lock, flags); + return 1; + } + + spin_unlock_irqrestore(&queue->ddcb_lock, flags); + return 0; +} + +/** + * genwqe_ddcbs_in_flight() - Check how many DDCBs are in flight + * @cd: pointer to genwqe device descriptor + * + * Keep track on the number of DDCBs which ware currently in the + * queue. This is needed for statistics as well as condition if we want + * to wait or better do polling in case of no interrupts available. + */ +int genwqe_ddcbs_in_flight(struct genwqe_dev *cd) +{ + unsigned long flags; + int ddcbs_in_flight = 0; + struct ddcb_queue *queue = &cd->queue; + + spin_lock_irqsave(&queue->ddcb_lock, flags); + ddcbs_in_flight += queue->ddcbs_in_flight; + spin_unlock_irqrestore(&queue->ddcb_lock, flags); + + return ddcbs_in_flight; +} + +static int setup_ddcb_queue(struct genwqe_dev *cd, struct ddcb_queue *queue) +{ + int rc, i; + struct ddcb *pddcb; + u64 val64; + unsigned int queue_size; + struct pci_dev *pci_dev = cd->pci_dev; + + if (GENWQE_DDCB_MAX < 2) + return -EINVAL; + + queue_size = roundup(GENWQE_DDCB_MAX * sizeof(struct ddcb), PAGE_SIZE); + + queue->ddcbs_in_flight = 0; /* statistics */ + queue->ddcbs_max_in_flight = 0; + queue->ddcbs_completed = 0; + queue->return_on_busy = 0; + queue->wait_on_busy = 0; + + queue->ddcb_seq = 0x100; /* start sequence number */ + queue->ddcb_max = GENWQE_DDCB_MAX; + queue->ddcb_vaddr = __genwqe_alloc_consistent(cd, queue_size, + &queue->ddcb_daddr); + if (queue->ddcb_vaddr == NULL) { + dev_err(&pci_dev->dev, + "[%s] **err: could not allocate DDCB **\n", __func__); + return -ENOMEM; + } + queue->ddcb_req = kcalloc(queue->ddcb_max, sizeof(struct ddcb_requ *), + GFP_KERNEL); + if (!queue->ddcb_req) { + rc = -ENOMEM; + goto free_ddcbs; + } + + queue->ddcb_waitqs = kcalloc(queue->ddcb_max, + sizeof(wait_queue_head_t), + GFP_KERNEL); + if (!queue->ddcb_waitqs) { + rc = -ENOMEM; + goto free_requs; + } + + for (i = 0; i < queue->ddcb_max; i++) { + pddcb = &queue->ddcb_vaddr[i]; /* DDCBs */ + pddcb->icrc_hsi_shi_32 = DDCB_COMPLETED_BE32; + pddcb->retc_16 = cpu_to_be16(0xfff); + + queue->ddcb_req[i] = NULL; /* requests */ + init_waitqueue_head(&queue->ddcb_waitqs[i]); /* waitqueues */ + } + + queue->ddcb_act = 0; + queue->ddcb_next = 0; /* queue is empty */ + + spin_lock_init(&queue->ddcb_lock); + init_waitqueue_head(&queue->busy_waitq); + + val64 = ((u64)(queue->ddcb_max - 1) << 8); /* lastptr */ + __genwqe_writeq(cd, queue->IO_QUEUE_CONFIG, 0x07); /* iCRC/vCRC */ + __genwqe_writeq(cd, queue->IO_QUEUE_SEGMENT, queue->ddcb_daddr); + __genwqe_writeq(cd, queue->IO_QUEUE_INITSQN, queue->ddcb_seq); + __genwqe_writeq(cd, queue->IO_QUEUE_WRAP, val64); + return 0; + + free_requs: + kfree(queue->ddcb_req); + queue->ddcb_req = NULL; + free_ddcbs: + __genwqe_free_consistent(cd, queue_size, queue->ddcb_vaddr, + queue->ddcb_daddr); + queue->ddcb_vaddr = NULL; + queue->ddcb_daddr = 0ull; + return rc; + +} + +static int ddcb_queue_initialized(struct ddcb_queue *queue) +{ + return queue->ddcb_vaddr != NULL; +} + +static void free_ddcb_queue(struct genwqe_dev *cd, struct ddcb_queue *queue) +{ + unsigned int queue_size; + + queue_size = roundup(queue->ddcb_max * sizeof(struct ddcb), PAGE_SIZE); + + kfree(queue->ddcb_req); + queue->ddcb_req = NULL; + + if (queue->ddcb_vaddr) { + __genwqe_free_consistent(cd, queue_size, queue->ddcb_vaddr, + queue->ddcb_daddr); + queue->ddcb_vaddr = NULL; + queue->ddcb_daddr = 0ull; + } +} + +static irqreturn_t genwqe_pf_isr(int irq, void *dev_id) +{ + u64 gfir; + struct genwqe_dev *cd = (struct genwqe_dev *)dev_id; + struct pci_dev *pci_dev = cd->pci_dev; + + /* + * In case of fatal FIR error the queue is stopped, such that + * we can safely check it without risking anything. + */ + cd->irqs_processed++; + wake_up_interruptible(&cd->queue_waitq); + + /* + * Checking for errors before kicking the queue might be + * safer, but slower for the good-case ... See above. + */ + gfir = __genwqe_readq(cd, IO_SLC_CFGREG_GFIR); + if (((gfir & GFIR_ERR_TRIGGER) != 0x0) && + !pci_channel_offline(pci_dev)) { + + if (cd->use_platform_recovery) { + /* + * Since we use raw accessors, EEH errors won't be + * detected by the platform until we do a non-raw + * MMIO or config space read + */ + readq(cd->mmio + IO_SLC_CFGREG_GFIR); + + /* Don't do anything if the PCI channel is frozen */ + if (pci_channel_offline(pci_dev)) + goto exit; + } + + wake_up_interruptible(&cd->health_waitq); + + /* + * By default GFIRs causes recovery actions. This + * count is just for debug when recovery is masked. + */ + dev_err_ratelimited(&pci_dev->dev, + "[%s] GFIR=%016llx\n", + __func__, gfir); + } + + exit: + return IRQ_HANDLED; +} + +static irqreturn_t genwqe_vf_isr(int irq, void *dev_id) +{ + struct genwqe_dev *cd = (struct genwqe_dev *)dev_id; + + cd->irqs_processed++; + wake_up_interruptible(&cd->queue_waitq); + + return IRQ_HANDLED; +} + +/** + * genwqe_card_thread() - Work thread for the DDCB queue + * @data: pointer to genwqe device descriptor + * + * The idea is to check if there are DDCBs in processing. If there are + * some finished DDCBs, we process them and wakeup the + * requestors. Otherwise we give other processes time using + * cond_resched(). + */ +static int genwqe_card_thread(void *data) +{ + int should_stop = 0; + struct genwqe_dev *cd = (struct genwqe_dev *)data; + + while (!kthread_should_stop()) { + + genwqe_check_ddcb_queue(cd, &cd->queue); + + if (GENWQE_POLLING_ENABLED) { + wait_event_interruptible_timeout( + cd->queue_waitq, + genwqe_ddcbs_in_flight(cd) || + (should_stop = kthread_should_stop()), 1); + } else { + wait_event_interruptible_timeout( + cd->queue_waitq, + genwqe_next_ddcb_ready(cd) || + (should_stop = kthread_should_stop()), HZ); + } + if (should_stop) + break; + + /* + * Avoid soft lockups on heavy loads; we do not want + * to disable our interrupts. + */ + cond_resched(); + } + return 0; +} + +/** + * genwqe_setup_service_layer() - Setup DDCB queue + * @cd: pointer to genwqe device descriptor + * + * Allocate DDCBs. Configure Service Layer Controller (SLC). + * + * Return: 0 success + */ +int genwqe_setup_service_layer(struct genwqe_dev *cd) +{ + int rc; + struct ddcb_queue *queue; + struct pci_dev *pci_dev = cd->pci_dev; + + if (genwqe_is_privileged(cd)) { + rc = genwqe_card_reset(cd); + if (rc < 0) { + dev_err(&pci_dev->dev, + "[%s] err: reset failed.\n", __func__); + return rc; + } + genwqe_read_softreset(cd); + } + + queue = &cd->queue; + queue->IO_QUEUE_CONFIG = IO_SLC_QUEUE_CONFIG; + queue->IO_QUEUE_STATUS = IO_SLC_QUEUE_STATUS; + queue->IO_QUEUE_SEGMENT = IO_SLC_QUEUE_SEGMENT; + queue->IO_QUEUE_INITSQN = IO_SLC_QUEUE_INITSQN; + queue->IO_QUEUE_OFFSET = IO_SLC_QUEUE_OFFSET; + queue->IO_QUEUE_WRAP = IO_SLC_QUEUE_WRAP; + queue->IO_QUEUE_WTIME = IO_SLC_QUEUE_WTIME; + queue->IO_QUEUE_ERRCNTS = IO_SLC_QUEUE_ERRCNTS; + queue->IO_QUEUE_LRW = IO_SLC_QUEUE_LRW; + + rc = setup_ddcb_queue(cd, queue); + if (rc != 0) { + rc = -ENODEV; + goto err_out; + } + + init_waitqueue_head(&cd->queue_waitq); + cd->card_thread = kthread_run(genwqe_card_thread, cd, + GENWQE_DEVNAME "%d_thread", + cd->card_idx); + if (IS_ERR(cd->card_thread)) { + rc = PTR_ERR(cd->card_thread); + cd->card_thread = NULL; + goto stop_free_queue; + } + + rc = genwqe_set_interrupt_capability(cd, GENWQE_MSI_IRQS); + if (rc) + goto stop_kthread; + + /* + * We must have all wait-queues initialized when we enable the + * interrupts. Otherwise we might crash if we get an early + * irq. + */ + init_waitqueue_head(&cd->health_waitq); + + if (genwqe_is_privileged(cd)) { + rc = request_irq(pci_dev->irq, genwqe_pf_isr, IRQF_SHARED, + GENWQE_DEVNAME, cd); + } else { + rc = request_irq(pci_dev->irq, genwqe_vf_isr, IRQF_SHARED, + GENWQE_DEVNAME, cd); + } + if (rc < 0) { + dev_err(&pci_dev->dev, "irq %d not free.\n", pci_dev->irq); + goto stop_irq_cap; + } + + cd->card_state = GENWQE_CARD_USED; + return 0; + + stop_irq_cap: + genwqe_reset_interrupt_capability(cd); + stop_kthread: + kthread_stop(cd->card_thread); + cd->card_thread = NULL; + stop_free_queue: + free_ddcb_queue(cd, queue); + err_out: + return rc; +} + +/** + * queue_wake_up_all() - Handles fatal error case + * @cd: pointer to genwqe device descriptor + * + * The PCI device got unusable and we have to stop all pending + * requests as fast as we can. The code after this must purge the + * DDCBs in question and ensure that all mappings are freed. + */ +static int queue_wake_up_all(struct genwqe_dev *cd) +{ + unsigned int i; + unsigned long flags; + struct ddcb_queue *queue = &cd->queue; + + spin_lock_irqsave(&queue->ddcb_lock, flags); + + for (i = 0; i < queue->ddcb_max; i++) + wake_up_interruptible(&queue->ddcb_waitqs[queue->ddcb_act]); + + wake_up_interruptible(&queue->busy_waitq); + spin_unlock_irqrestore(&queue->ddcb_lock, flags); + + return 0; +} + +/** + * genwqe_finish_queue() - Remove any genwqe devices and user-interfaces + * @cd: pointer to genwqe device descriptor + * + * Relies on the pre-condition that there are no users of the card + * device anymore e.g. with open file-descriptors. + * + * This function must be robust enough to be called twice. + */ +int genwqe_finish_queue(struct genwqe_dev *cd) +{ + int i, rc = 0, in_flight; + int waitmax = GENWQE_DDCB_SOFTWARE_TIMEOUT; + struct pci_dev *pci_dev = cd->pci_dev; + struct ddcb_queue *queue = &cd->queue; + + if (!ddcb_queue_initialized(queue)) + return 0; + + /* Do not wipe out the error state. */ + if (cd->card_state == GENWQE_CARD_USED) + cd->card_state = GENWQE_CARD_UNUSED; + + /* Wake up all requests in the DDCB queue such that they + should be removed nicely. */ + queue_wake_up_all(cd); + + /* We must wait to get rid of the DDCBs in flight */ + for (i = 0; i < waitmax; i++) { + in_flight = genwqe_ddcbs_in_flight(cd); + + if (in_flight == 0) + break; + + dev_dbg(&pci_dev->dev, + " DEBUG [%d/%d] waiting for queue to get empty: %d requests!\n", + i, waitmax, in_flight); + + /* + * Severe severe error situation: The card itself has + * 16 DDCB queues, each queue has e.g. 32 entries, + * each DDBC has a hardware timeout of currently 250 + * msec but the PFs have a hardware timeout of 8 sec + * ... so I take something large. + */ + msleep(1000); + } + if (i == waitmax) { + dev_err(&pci_dev->dev, " [%s] err: queue is not empty!!\n", + __func__); + rc = -EIO; + } + return rc; +} + +/** + * genwqe_release_service_layer() - Shutdown DDCB queue + * @cd: genwqe device descriptor + * + * This function must be robust enough to be called twice. + */ +int genwqe_release_service_layer(struct genwqe_dev *cd) +{ + struct pci_dev *pci_dev = cd->pci_dev; + + if (!ddcb_queue_initialized(&cd->queue)) + return 1; + + free_irq(pci_dev->irq, cd); + genwqe_reset_interrupt_capability(cd); + + if (cd->card_thread != NULL) { + kthread_stop(cd->card_thread); + cd->card_thread = NULL; + } + + free_ddcb_queue(cd, &cd->queue); + return 0; +} diff --git a/drivers/misc/genwqe/card_ddcb.h b/drivers/misc/genwqe/card_ddcb.h new file mode 100644 index 000000000..a47ff49ae --- /dev/null +++ b/drivers/misc/genwqe/card_ddcb.h @@ -0,0 +1,179 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef __CARD_DDCB_H__ +#define __CARD_DDCB_H__ + +/** + * IBM Accelerator Family 'GenWQE' + * + * (C) Copyright IBM Corp. 2013 + * + * Author: Frank Haverkamp <haver@linux.vnet.ibm.com> + * Author: Joerg-Stephan Vogt <jsvogt@de.ibm.com> + * Author: Michael Jung <mijung@gmx.net> + * Author: Michael Ruettger <michael@ibmra.de> + */ + +#include <linux/types.h> +#include <asm/byteorder.h> + +#include "genwqe_driver.h" +#include "card_base.h" + +/** + * struct ddcb - Device Driver Control Block DDCB + * @hsi: Hardware software interlock + * @shi: Software hardware interlock. Hsi and shi are used to interlock + * software and hardware activities. We are using a compare and + * swap operation to ensure that there are no races when + * activating new DDCBs on the queue, or when we need to + * purge a DDCB from a running queue. + * @acfunc: Accelerator function addresses a unit within the chip + * @cmd: Command to work on + * @cmdopts_16: Options for the command + * @asiv: Input data + * @asv: Output data + * + * The DDCB data format is big endian. Multiple consequtive DDBCs form + * a DDCB queue. + */ +#define ASIV_LENGTH 104 /* Old specification without ATS field */ +#define ASIV_LENGTH_ATS 96 /* New specification with ATS field */ +#define ASV_LENGTH 64 + +struct ddcb { + union { + __be32 icrc_hsi_shi_32; /* iCRC, Hardware/SW interlock */ + struct { + __be16 icrc_16; + u8 hsi; + u8 shi; + }; + }; + u8 pre; /* Preamble */ + u8 xdir; /* Execution Directives */ + __be16 seqnum_16; /* Sequence Number */ + + u8 acfunc; /* Accelerator Function.. */ + u8 cmd; /* Command. */ + __be16 cmdopts_16; /* Command Options */ + u8 sur; /* Status Update Rate */ + u8 psp; /* Protection Section Pointer */ + __be16 rsvd_0e_16; /* Reserved invariant */ + + __be64 fwiv_64; /* Firmware Invariant. */ + + union { + struct { + __be64 ats_64; /* Address Translation Spec */ + u8 asiv[ASIV_LENGTH_ATS]; /* New ASIV */ + } n; + u8 __asiv[ASIV_LENGTH]; /* obsolete */ + }; + u8 asv[ASV_LENGTH]; /* Appl Spec Variant */ + + __be16 rsvd_c0_16; /* Reserved Variant */ + __be16 vcrc_16; /* Variant CRC */ + __be32 rsvd_32; /* Reserved unprotected */ + + __be64 deque_ts_64; /* Deque Time Stamp. */ + + __be16 retc_16; /* Return Code */ + __be16 attn_16; /* Attention/Extended Error Codes */ + __be32 progress_32; /* Progress indicator. */ + + __be64 cmplt_ts_64; /* Completion Time Stamp. */ + + /* The following layout matches the new service layer format */ + __be32 ibdc_32; /* Inbound Data Count (* 256) */ + __be32 obdc_32; /* Outbound Data Count (* 256) */ + + __be64 rsvd_SLH_64; /* Reserved for hardware */ + union { /* private data for driver */ + u8 priv[8]; + __be64 priv_64; + }; + __be64 disp_ts_64; /* Dispatch TimeStamp */ +} __attribute__((__packed__)); + +/* CRC polynomials for DDCB */ +#define CRC16_POLYNOMIAL 0x1021 + +/* + * SHI: Software to Hardware Interlock + * This 1 byte field is written by software to interlock the + * movement of one queue entry to another with the hardware in the + * chip. + */ +#define DDCB_SHI_INTR 0x04 /* Bit 2 */ +#define DDCB_SHI_PURGE 0x02 /* Bit 1 */ +#define DDCB_SHI_NEXT 0x01 /* Bit 0 */ + +/* + * HSI: Hardware to Software interlock + * This 1 byte field is written by hardware to interlock the movement + * of one queue entry to another with the software in the chip. + */ +#define DDCB_HSI_COMPLETED 0x40 /* Bit 6 */ +#define DDCB_HSI_FETCHED 0x04 /* Bit 2 */ + +/* + * Accessing HSI/SHI is done 32-bit wide + * Normally 16-bit access would work too, but on some platforms the + * 16 compare and swap operation is not supported. Therefore + * switching to 32-bit such that those platforms will work too. + * + * iCRC HSI/SHI + */ +#define DDCB_INTR_BE32 cpu_to_be32(0x00000004) +#define DDCB_PURGE_BE32 cpu_to_be32(0x00000002) +#define DDCB_NEXT_BE32 cpu_to_be32(0x00000001) +#define DDCB_COMPLETED_BE32 cpu_to_be32(0x00004000) +#define DDCB_FETCHED_BE32 cpu_to_be32(0x00000400) + +/* Definitions of DDCB presets */ +#define DDCB_PRESET_PRE 0x80 +#define ICRC_LENGTH(n) ((n) + 8 + 8 + 8) /* used ASIV + hdr fields */ +#define VCRC_LENGTH(n) ((n)) /* used ASV */ + +/* + * Genwqe Scatter Gather list + * Each element has up to 8 entries. + * The chaining element is element 0 cause of prefetching needs. + */ + +/* + * 0b0110 Chained descriptor. The descriptor is describing the next + * descriptor list. + */ +#define SG_CHAINED (0x6) + +/* + * 0b0010 First entry of a descriptor list. Start from a Buffer-Empty + * condition. + */ +#define SG_DATA (0x2) + +/* + * 0b0000 Early terminator. This is the last entry on the list + * irregardless of the length indicated. + */ +#define SG_END_LIST (0x0) + +/** + * struct sglist - Scatter gather list + * @target_addr: Either a dma addr of memory to work on or a + * dma addr or a subsequent sglist block. + * @len: Length of the data block. + * @flags: See above. + * + * Depending on the command the GenWQE card can use a scatter gather + * list to describe the memory it works on. Always 8 sg_entry's form + * a block. + */ +struct sg_entry { + __be64 target_addr; + __be32 len; + __be32 flags; +}; + +#endif /* __CARD_DDCB_H__ */ diff --git a/drivers/misc/genwqe/card_debugfs.c b/drivers/misc/genwqe/card_debugfs.c new file mode 100644 index 000000000..491fb4482 --- /dev/null +++ b/drivers/misc/genwqe/card_debugfs.c @@ -0,0 +1,378 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * IBM Accelerator Family 'GenWQE' + * + * (C) Copyright IBM Corp. 2013 + * + * Author: Frank Haverkamp <haver@linux.vnet.ibm.com> + * Author: Joerg-Stephan Vogt <jsvogt@de.ibm.com> + * Author: Michael Jung <mijung@gmx.net> + * Author: Michael Ruettger <michael@ibmra.de> + */ + +/* + * Debugfs interfaces for the GenWQE card. Help to debug potential + * problems. Dump internal chip state for debugging and failure + * determination. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/uaccess.h> + +#include "card_base.h" +#include "card_ddcb.h" + +static void dbg_uidn_show(struct seq_file *s, struct genwqe_reg *regs, + int entries) +{ + unsigned int i; + u32 v_hi, v_lo; + + for (i = 0; i < entries; i++) { + v_hi = (regs[i].val >> 32) & 0xffffffff; + v_lo = (regs[i].val) & 0xffffffff; + + seq_printf(s, " 0x%08x 0x%08x 0x%08x 0x%08x EXT_ERR_REC\n", + regs[i].addr, regs[i].idx, v_hi, v_lo); + } +} + +static int curr_dbg_uidn_show(struct seq_file *s, void *unused, int uid) +{ + struct genwqe_dev *cd = s->private; + int entries; + struct genwqe_reg *regs; + + entries = genwqe_ffdc_buff_size(cd, uid); + if (entries < 0) + return -EINVAL; + + if (entries == 0) + return 0; + + regs = kcalloc(entries, sizeof(*regs), GFP_KERNEL); + if (regs == NULL) + return -ENOMEM; + + genwqe_stop_traps(cd); /* halt the traps while dumping data */ + genwqe_ffdc_buff_read(cd, uid, regs, entries); + genwqe_start_traps(cd); + + dbg_uidn_show(s, regs, entries); + kfree(regs); + return 0; +} + +static int curr_dbg_uid0_show(struct seq_file *s, void *unused) +{ + return curr_dbg_uidn_show(s, unused, 0); +} + +DEFINE_SHOW_ATTRIBUTE(curr_dbg_uid0); + +static int curr_dbg_uid1_show(struct seq_file *s, void *unused) +{ + return curr_dbg_uidn_show(s, unused, 1); +} + +DEFINE_SHOW_ATTRIBUTE(curr_dbg_uid1); + +static int curr_dbg_uid2_show(struct seq_file *s, void *unused) +{ + return curr_dbg_uidn_show(s, unused, 2); +} + +DEFINE_SHOW_ATTRIBUTE(curr_dbg_uid2); + +static int prev_dbg_uidn_show(struct seq_file *s, void *unused, int uid) +{ + struct genwqe_dev *cd = s->private; + + dbg_uidn_show(s, cd->ffdc[uid].regs, cd->ffdc[uid].entries); + return 0; +} + +static int prev_dbg_uid0_show(struct seq_file *s, void *unused) +{ + return prev_dbg_uidn_show(s, unused, 0); +} + +DEFINE_SHOW_ATTRIBUTE(prev_dbg_uid0); + +static int prev_dbg_uid1_show(struct seq_file *s, void *unused) +{ + return prev_dbg_uidn_show(s, unused, 1); +} + +DEFINE_SHOW_ATTRIBUTE(prev_dbg_uid1); + +static int prev_dbg_uid2_show(struct seq_file *s, void *unused) +{ + return prev_dbg_uidn_show(s, unused, 2); +} + +DEFINE_SHOW_ATTRIBUTE(prev_dbg_uid2); + +static int curr_regs_show(struct seq_file *s, void *unused) +{ + struct genwqe_dev *cd = s->private; + unsigned int i; + struct genwqe_reg *regs; + + regs = kcalloc(GENWQE_FFDC_REGS, sizeof(*regs), GFP_KERNEL); + if (regs == NULL) + return -ENOMEM; + + genwqe_stop_traps(cd); + genwqe_read_ffdc_regs(cd, regs, GENWQE_FFDC_REGS, 1); + genwqe_start_traps(cd); + + for (i = 0; i < GENWQE_FFDC_REGS; i++) { + if (regs[i].addr == 0xffffffff) + break; /* invalid entries */ + + if (regs[i].val == 0x0ull) + continue; /* do not print 0x0 FIRs */ + + seq_printf(s, " 0x%08x 0x%016llx\n", + regs[i].addr, regs[i].val); + } + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(curr_regs); + +static int prev_regs_show(struct seq_file *s, void *unused) +{ + struct genwqe_dev *cd = s->private; + unsigned int i; + struct genwqe_reg *regs = cd->ffdc[GENWQE_DBG_REGS].regs; + + if (regs == NULL) + return -EINVAL; + + for (i = 0; i < GENWQE_FFDC_REGS; i++) { + if (regs[i].addr == 0xffffffff) + break; /* invalid entries */ + + if (regs[i].val == 0x0ull) + continue; /* do not print 0x0 FIRs */ + + seq_printf(s, " 0x%08x 0x%016llx\n", + regs[i].addr, regs[i].val); + } + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(prev_regs); + +static int jtimer_show(struct seq_file *s, void *unused) +{ + struct genwqe_dev *cd = s->private; + unsigned int vf_num; + u64 jtimer; + + jtimer = genwqe_read_vreg(cd, IO_SLC_VF_APPJOB_TIMEOUT, 0); + seq_printf(s, " PF 0x%016llx %d msec\n", jtimer, + GENWQE_PF_JOBTIMEOUT_MSEC); + + for (vf_num = 0; vf_num < cd->num_vfs; vf_num++) { + jtimer = genwqe_read_vreg(cd, IO_SLC_VF_APPJOB_TIMEOUT, + vf_num + 1); + seq_printf(s, " VF%-2d 0x%016llx %d msec\n", vf_num, jtimer, + cd->vf_jobtimeout_msec[vf_num]); + } + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(jtimer); + +static int queue_working_time_show(struct seq_file *s, void *unused) +{ + struct genwqe_dev *cd = s->private; + unsigned int vf_num; + u64 t; + + t = genwqe_read_vreg(cd, IO_SLC_VF_QUEUE_WTIME, 0); + seq_printf(s, " PF 0x%016llx\n", t); + + for (vf_num = 0; vf_num < cd->num_vfs; vf_num++) { + t = genwqe_read_vreg(cd, IO_SLC_VF_QUEUE_WTIME, vf_num + 1); + seq_printf(s, " VF%-2d 0x%016llx\n", vf_num, t); + } + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(queue_working_time); + +static int ddcb_info_show(struct seq_file *s, void *unused) +{ + struct genwqe_dev *cd = s->private; + unsigned int i; + struct ddcb_queue *queue; + struct ddcb *pddcb; + + queue = &cd->queue; + seq_puts(s, "DDCB QUEUE:\n"); + seq_printf(s, " ddcb_max: %d\n" + " ddcb_daddr: %016llx - %016llx\n" + " ddcb_vaddr: %p\n" + " ddcbs_in_flight: %u\n" + " ddcbs_max_in_flight: %u\n" + " ddcbs_completed: %u\n" + " return_on_busy: %u\n" + " wait_on_busy: %u\n" + " irqs_processed: %u\n", + queue->ddcb_max, (long long)queue->ddcb_daddr, + (long long)queue->ddcb_daddr + + (queue->ddcb_max * DDCB_LENGTH), + queue->ddcb_vaddr, queue->ddcbs_in_flight, + queue->ddcbs_max_in_flight, queue->ddcbs_completed, + queue->return_on_busy, queue->wait_on_busy, + cd->irqs_processed); + + /* Hardware State */ + seq_printf(s, " 0x%08x 0x%016llx IO_QUEUE_CONFIG\n" + " 0x%08x 0x%016llx IO_QUEUE_STATUS\n" + " 0x%08x 0x%016llx IO_QUEUE_SEGMENT\n" + " 0x%08x 0x%016llx IO_QUEUE_INITSQN\n" + " 0x%08x 0x%016llx IO_QUEUE_WRAP\n" + " 0x%08x 0x%016llx IO_QUEUE_OFFSET\n" + " 0x%08x 0x%016llx IO_QUEUE_WTIME\n" + " 0x%08x 0x%016llx IO_QUEUE_ERRCNTS\n" + " 0x%08x 0x%016llx IO_QUEUE_LRW\n", + queue->IO_QUEUE_CONFIG, + __genwqe_readq(cd, queue->IO_QUEUE_CONFIG), + queue->IO_QUEUE_STATUS, + __genwqe_readq(cd, queue->IO_QUEUE_STATUS), + queue->IO_QUEUE_SEGMENT, + __genwqe_readq(cd, queue->IO_QUEUE_SEGMENT), + queue->IO_QUEUE_INITSQN, + __genwqe_readq(cd, queue->IO_QUEUE_INITSQN), + queue->IO_QUEUE_WRAP, + __genwqe_readq(cd, queue->IO_QUEUE_WRAP), + queue->IO_QUEUE_OFFSET, + __genwqe_readq(cd, queue->IO_QUEUE_OFFSET), + queue->IO_QUEUE_WTIME, + __genwqe_readq(cd, queue->IO_QUEUE_WTIME), + queue->IO_QUEUE_ERRCNTS, + __genwqe_readq(cd, queue->IO_QUEUE_ERRCNTS), + queue->IO_QUEUE_LRW, + __genwqe_readq(cd, queue->IO_QUEUE_LRW)); + + seq_printf(s, "DDCB list (ddcb_act=%d/ddcb_next=%d):\n", + queue->ddcb_act, queue->ddcb_next); + + pddcb = queue->ddcb_vaddr; + for (i = 0; i < queue->ddcb_max; i++) { + seq_printf(s, " %-3d: RETC=%03x SEQ=%04x HSI/SHI=%02x/%02x ", + i, be16_to_cpu(pddcb->retc_16), + be16_to_cpu(pddcb->seqnum_16), + pddcb->hsi, pddcb->shi); + seq_printf(s, "PRIV=%06llx CMD=%02x\n", + be64_to_cpu(pddcb->priv_64), pddcb->cmd); + pddcb++; + } + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(ddcb_info); + +static int info_show(struct seq_file *s, void *unused) +{ + struct genwqe_dev *cd = s->private; + u64 app_id, slu_id, bitstream = -1; + struct pci_dev *pci_dev = cd->pci_dev; + + slu_id = __genwqe_readq(cd, IO_SLU_UNITCFG); + app_id = __genwqe_readq(cd, IO_APP_UNITCFG); + + if (genwqe_is_privileged(cd)) + bitstream = __genwqe_readq(cd, IO_SLU_BITSTREAM); + + seq_printf(s, "%s driver version: %s\n" + " Device Name/Type: %s %s CardIdx: %d\n" + " SLU/APP Config : 0x%016llx/0x%016llx\n" + " Build Date : %u/%x/%u\n" + " Base Clock : %u MHz\n" + " Arch/SVN Release: %u/%llx\n" + " Bitstream : %llx\n", + GENWQE_DEVNAME, DRV_VERSION, dev_name(&pci_dev->dev), + genwqe_is_privileged(cd) ? + "Physical" : "Virtual or no SR-IOV", + cd->card_idx, slu_id, app_id, + (u16)((slu_id >> 12) & 0x0fLLU), /* month */ + (u16)((slu_id >> 4) & 0xffLLU), /* day */ + (u16)((slu_id >> 16) & 0x0fLLU) + 2010, /* year */ + genwqe_base_clock_frequency(cd), + (u16)((slu_id >> 32) & 0xffLLU), slu_id >> 40, + bitstream); + + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(info); + +void genwqe_init_debugfs(struct genwqe_dev *cd) +{ + struct dentry *root; + char card_name[64]; + char name[64]; + unsigned int i; + + sprintf(card_name, "%s%d_card", GENWQE_DEVNAME, cd->card_idx); + + root = debugfs_create_dir(card_name, cd->debugfs_genwqe); + + /* non privileged interfaces are done here */ + debugfs_create_file("ddcb_info", S_IRUGO, root, cd, &ddcb_info_fops); + debugfs_create_file("info", S_IRUGO, root, cd, &info_fops); + debugfs_create_x64("err_inject", 0666, root, &cd->err_inject); + debugfs_create_u32("ddcb_software_timeout", 0666, root, + &cd->ddcb_software_timeout); + debugfs_create_u32("kill_timeout", 0666, root, &cd->kill_timeout); + + /* privileged interfaces follow here */ + if (!genwqe_is_privileged(cd)) { + cd->debugfs_root = root; + return; + } + + debugfs_create_file("curr_regs", S_IRUGO, root, cd, &curr_regs_fops); + debugfs_create_file("curr_dbg_uid0", S_IRUGO, root, cd, + &curr_dbg_uid0_fops); + debugfs_create_file("curr_dbg_uid1", S_IRUGO, root, cd, + &curr_dbg_uid1_fops); + debugfs_create_file("curr_dbg_uid2", S_IRUGO, root, cd, + &curr_dbg_uid2_fops); + debugfs_create_file("prev_regs", S_IRUGO, root, cd, &prev_regs_fops); + debugfs_create_file("prev_dbg_uid0", S_IRUGO, root, cd, + &prev_dbg_uid0_fops); + debugfs_create_file("prev_dbg_uid1", S_IRUGO, root, cd, + &prev_dbg_uid1_fops); + debugfs_create_file("prev_dbg_uid2", S_IRUGO, root, cd, + &prev_dbg_uid2_fops); + + for (i = 0; i < GENWQE_MAX_VFS; i++) { + sprintf(name, "vf%u_jobtimeout_msec", i); + debugfs_create_u32(name, 0666, root, + &cd->vf_jobtimeout_msec[i]); + } + + debugfs_create_file("jobtimer", S_IRUGO, root, cd, &jtimer_fops); + debugfs_create_file("queue_working_time", S_IRUGO, root, cd, + &queue_working_time_fops); + debugfs_create_u32("skip_recovery", 0666, root, &cd->skip_recovery); + debugfs_create_u32("use_platform_recovery", 0666, root, + &cd->use_platform_recovery); + + cd->debugfs_root = root; +} + +void genqwe_exit_debugfs(struct genwqe_dev *cd) +{ + debugfs_remove_recursive(cd->debugfs_root); +} diff --git a/drivers/misc/genwqe/card_dev.c b/drivers/misc/genwqe/card_dev.c new file mode 100644 index 000000000..55fc5b80e --- /dev/null +++ b/drivers/misc/genwqe/card_dev.c @@ -0,0 +1,1391 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * IBM Accelerator Family 'GenWQE' + * + * (C) Copyright IBM Corp. 2013 + * + * Author: Frank Haverkamp <haver@linux.vnet.ibm.com> + * Author: Joerg-Stephan Vogt <jsvogt@de.ibm.com> + * Author: Michael Jung <mijung@gmx.net> + * Author: Michael Ruettger <michael@ibmra.de> + */ + +/* + * Character device representation of the GenWQE device. This allows + * user-space applications to communicate with the card. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/string.h> +#include <linux/fs.h> +#include <linux/sched/signal.h> +#include <linux/wait.h> +#include <linux/delay.h> +#include <linux/atomic.h> + +#include "card_base.h" +#include "card_ddcb.h" + +static int genwqe_open_files(struct genwqe_dev *cd) +{ + int rc; + unsigned long flags; + + spin_lock_irqsave(&cd->file_lock, flags); + rc = list_empty(&cd->file_list); + spin_unlock_irqrestore(&cd->file_lock, flags); + return !rc; +} + +static void genwqe_add_file(struct genwqe_dev *cd, struct genwqe_file *cfile) +{ + unsigned long flags; + + cfile->opener = get_pid(task_tgid(current)); + spin_lock_irqsave(&cd->file_lock, flags); + list_add(&cfile->list, &cd->file_list); + spin_unlock_irqrestore(&cd->file_lock, flags); +} + +static int genwqe_del_file(struct genwqe_dev *cd, struct genwqe_file *cfile) +{ + unsigned long flags; + + spin_lock_irqsave(&cd->file_lock, flags); + list_del(&cfile->list); + spin_unlock_irqrestore(&cd->file_lock, flags); + put_pid(cfile->opener); + + return 0; +} + +static void genwqe_add_pin(struct genwqe_file *cfile, struct dma_mapping *m) +{ + unsigned long flags; + + spin_lock_irqsave(&cfile->pin_lock, flags); + list_add(&m->pin_list, &cfile->pin_list); + spin_unlock_irqrestore(&cfile->pin_lock, flags); +} + +static int genwqe_del_pin(struct genwqe_file *cfile, struct dma_mapping *m) +{ + unsigned long flags; + + spin_lock_irqsave(&cfile->pin_lock, flags); + list_del(&m->pin_list); + spin_unlock_irqrestore(&cfile->pin_lock, flags); + + return 0; +} + +/** + * genwqe_search_pin() - Search for the mapping for a userspace address + * @cfile: Descriptor of opened file + * @u_addr: User virtual address + * @size: Size of buffer + * @virt_addr: Virtual address to be updated + * + * Return: Pointer to the corresponding mapping NULL if not found + */ +static struct dma_mapping *genwqe_search_pin(struct genwqe_file *cfile, + unsigned long u_addr, + unsigned int size, + void **virt_addr) +{ + unsigned long flags; + struct dma_mapping *m; + + spin_lock_irqsave(&cfile->pin_lock, flags); + + list_for_each_entry(m, &cfile->pin_list, pin_list) { + if ((((u64)m->u_vaddr) <= (u_addr)) && + (((u64)m->u_vaddr + m->size) >= (u_addr + size))) { + + if (virt_addr) + *virt_addr = m->k_vaddr + + (u_addr - (u64)m->u_vaddr); + + spin_unlock_irqrestore(&cfile->pin_lock, flags); + return m; + } + } + spin_unlock_irqrestore(&cfile->pin_lock, flags); + return NULL; +} + +static void __genwqe_add_mapping(struct genwqe_file *cfile, + struct dma_mapping *dma_map) +{ + unsigned long flags; + + spin_lock_irqsave(&cfile->map_lock, flags); + list_add(&dma_map->card_list, &cfile->map_list); + spin_unlock_irqrestore(&cfile->map_lock, flags); +} + +static void __genwqe_del_mapping(struct genwqe_file *cfile, + struct dma_mapping *dma_map) +{ + unsigned long flags; + + spin_lock_irqsave(&cfile->map_lock, flags); + list_del(&dma_map->card_list); + spin_unlock_irqrestore(&cfile->map_lock, flags); +} + + +/** + * __genwqe_search_mapping() - Search for the mapping for a userspace address + * @cfile: descriptor of opened file + * @u_addr: user virtual address + * @size: size of buffer + * @dma_addr: DMA address to be updated + * @virt_addr: Virtual address to be updated + * Return: Pointer to the corresponding mapping NULL if not found + */ +static struct dma_mapping *__genwqe_search_mapping(struct genwqe_file *cfile, + unsigned long u_addr, + unsigned int size, + dma_addr_t *dma_addr, + void **virt_addr) +{ + unsigned long flags; + struct dma_mapping *m; + struct pci_dev *pci_dev = cfile->cd->pci_dev; + + spin_lock_irqsave(&cfile->map_lock, flags); + list_for_each_entry(m, &cfile->map_list, card_list) { + + if ((((u64)m->u_vaddr) <= (u_addr)) && + (((u64)m->u_vaddr + m->size) >= (u_addr + size))) { + + /* match found: current is as expected and + addr is in range */ + if (dma_addr) + *dma_addr = m->dma_addr + + (u_addr - (u64)m->u_vaddr); + + if (virt_addr) + *virt_addr = m->k_vaddr + + (u_addr - (u64)m->u_vaddr); + + spin_unlock_irqrestore(&cfile->map_lock, flags); + return m; + } + } + spin_unlock_irqrestore(&cfile->map_lock, flags); + + dev_err(&pci_dev->dev, + "[%s] Entry not found: u_addr=%lx, size=%x\n", + __func__, u_addr, size); + + return NULL; +} + +static void genwqe_remove_mappings(struct genwqe_file *cfile) +{ + int i = 0; + struct list_head *node, *next; + struct dma_mapping *dma_map; + struct genwqe_dev *cd = cfile->cd; + struct pci_dev *pci_dev = cfile->cd->pci_dev; + + list_for_each_safe(node, next, &cfile->map_list) { + dma_map = list_entry(node, struct dma_mapping, card_list); + + list_del_init(&dma_map->card_list); + + /* + * This is really a bug, because those things should + * have been already tidied up. + * + * GENWQE_MAPPING_RAW should have been removed via mmunmap(). + * GENWQE_MAPPING_SGL_TEMP should be removed by tidy up code. + */ + dev_err(&pci_dev->dev, + "[%s] %d. cleanup mapping: u_vaddr=%p u_kaddr=%016lx dma_addr=%lx\n", + __func__, i++, dma_map->u_vaddr, + (unsigned long)dma_map->k_vaddr, + (unsigned long)dma_map->dma_addr); + + if (dma_map->type == GENWQE_MAPPING_RAW) { + /* we allocated this dynamically */ + __genwqe_free_consistent(cd, dma_map->size, + dma_map->k_vaddr, + dma_map->dma_addr); + kfree(dma_map); + } else if (dma_map->type == GENWQE_MAPPING_SGL_TEMP) { + /* we use dma_map statically from the request */ + genwqe_user_vunmap(cd, dma_map); + } + } +} + +static void genwqe_remove_pinnings(struct genwqe_file *cfile) +{ + struct list_head *node, *next; + struct dma_mapping *dma_map; + struct genwqe_dev *cd = cfile->cd; + + list_for_each_safe(node, next, &cfile->pin_list) { + dma_map = list_entry(node, struct dma_mapping, pin_list); + + /* + * This is not a bug, because a killed processed might + * not call the unpin ioctl, which is supposed to free + * the resources. + * + * Pinnings are dymically allocated and need to be + * deleted. + */ + list_del_init(&dma_map->pin_list); + genwqe_user_vunmap(cd, dma_map); + kfree(dma_map); + } +} + +/** + * genwqe_kill_fasync() - Send signal to all processes with open GenWQE files + * @cd: GenWQE device information + * @sig: Signal to send out + * + * E.g. genwqe_send_signal(cd, SIGIO); + */ +static int genwqe_kill_fasync(struct genwqe_dev *cd, int sig) +{ + unsigned int files = 0; + unsigned long flags; + struct genwqe_file *cfile; + + spin_lock_irqsave(&cd->file_lock, flags); + list_for_each_entry(cfile, &cd->file_list, list) { + if (cfile->async_queue) + kill_fasync(&cfile->async_queue, sig, POLL_HUP); + files++; + } + spin_unlock_irqrestore(&cd->file_lock, flags); + return files; +} + +static int genwqe_terminate(struct genwqe_dev *cd) +{ + unsigned int files = 0; + unsigned long flags; + struct genwqe_file *cfile; + + spin_lock_irqsave(&cd->file_lock, flags); + list_for_each_entry(cfile, &cd->file_list, list) { + kill_pid(cfile->opener, SIGKILL, 1); + files++; + } + spin_unlock_irqrestore(&cd->file_lock, flags); + return files; +} + +/** + * genwqe_open() - file open + * @inode: file system information + * @filp: file handle + * + * This function is executed whenever an application calls + * open("/dev/genwqe",..). + * + * Return: 0 if successful or <0 if errors + */ +static int genwqe_open(struct inode *inode, struct file *filp) +{ + struct genwqe_dev *cd; + struct genwqe_file *cfile; + + cfile = kzalloc(sizeof(*cfile), GFP_KERNEL); + if (cfile == NULL) + return -ENOMEM; + + cd = container_of(inode->i_cdev, struct genwqe_dev, cdev_genwqe); + cfile->cd = cd; + cfile->filp = filp; + cfile->client = NULL; + + spin_lock_init(&cfile->map_lock); /* list of raw memory allocations */ + INIT_LIST_HEAD(&cfile->map_list); + + spin_lock_init(&cfile->pin_lock); /* list of user pinned memory */ + INIT_LIST_HEAD(&cfile->pin_list); + + filp->private_data = cfile; + + genwqe_add_file(cd, cfile); + return 0; +} + +/** + * genwqe_fasync() - Setup process to receive SIGIO. + * @fd: file descriptor + * @filp: file handle + * @mode: file mode + * + * Sending a signal is working as following: + * + * if (cdev->async_queue) + * kill_fasync(&cdev->async_queue, SIGIO, POLL_IN); + * + * Some devices also implement asynchronous notification to indicate + * when the device can be written; in this case, of course, + * kill_fasync must be called with a mode of POLL_OUT. + */ +static int genwqe_fasync(int fd, struct file *filp, int mode) +{ + struct genwqe_file *cdev = (struct genwqe_file *)filp->private_data; + + return fasync_helper(fd, filp, mode, &cdev->async_queue); +} + + +/** + * genwqe_release() - file close + * @inode: file system information + * @filp: file handle + * + * This function is executed whenever an application calls 'close(fd_genwqe)' + * + * Return: always 0 + */ +static int genwqe_release(struct inode *inode, struct file *filp) +{ + struct genwqe_file *cfile = (struct genwqe_file *)filp->private_data; + struct genwqe_dev *cd = cfile->cd; + + /* there must be no entries in these lists! */ + genwqe_remove_mappings(cfile); + genwqe_remove_pinnings(cfile); + + /* remove this filp from the asynchronously notified filp's */ + genwqe_fasync(-1, filp, 0); + + /* + * For this to work we must not release cd when this cfile is + * not yet released, otherwise the list entry is invalid, + * because the list itself gets reinstantiated! + */ + genwqe_del_file(cd, cfile); + kfree(cfile); + return 0; +} + +static void genwqe_vma_open(struct vm_area_struct *vma) +{ + /* nothing ... */ +} + +/** + * genwqe_vma_close() - Called each time when vma is unmapped + * @vma: VMA area to close + * + * Free memory which got allocated by GenWQE mmap(). + */ +static void genwqe_vma_close(struct vm_area_struct *vma) +{ + unsigned long vsize = vma->vm_end - vma->vm_start; + struct inode *inode = file_inode(vma->vm_file); + struct dma_mapping *dma_map; + struct genwqe_dev *cd = container_of(inode->i_cdev, struct genwqe_dev, + cdev_genwqe); + struct pci_dev *pci_dev = cd->pci_dev; + dma_addr_t d_addr = 0; + struct genwqe_file *cfile = vma->vm_private_data; + + dma_map = __genwqe_search_mapping(cfile, vma->vm_start, vsize, + &d_addr, NULL); + if (dma_map == NULL) { + dev_err(&pci_dev->dev, + " [%s] err: mapping not found: v=%lx, p=%lx s=%lx\n", + __func__, vma->vm_start, vma->vm_pgoff << PAGE_SHIFT, + vsize); + return; + } + __genwqe_del_mapping(cfile, dma_map); + __genwqe_free_consistent(cd, dma_map->size, dma_map->k_vaddr, + dma_map->dma_addr); + kfree(dma_map); +} + +static const struct vm_operations_struct genwqe_vma_ops = { + .open = genwqe_vma_open, + .close = genwqe_vma_close, +}; + +/** + * genwqe_mmap() - Provide contignous buffers to userspace + * @filp: File pointer (unused) + * @vma: VMA area to map + * + * We use mmap() to allocate contignous buffers used for DMA + * transfers. After the buffer is allocated we remap it to user-space + * and remember a reference to our dma_mapping data structure, where + * we store the associated DMA address and allocated size. + * + * When we receive a DDCB execution request with the ATS bits set to + * plain buffer, we lookup our dma_mapping list to find the + * corresponding DMA address for the associated user-space address. + */ +static int genwqe_mmap(struct file *filp, struct vm_area_struct *vma) +{ + int rc; + unsigned long pfn, vsize = vma->vm_end - vma->vm_start; + struct genwqe_file *cfile = (struct genwqe_file *)filp->private_data; + struct genwqe_dev *cd = cfile->cd; + struct dma_mapping *dma_map; + + if (vsize == 0) + return -EINVAL; + + if (get_order(vsize) > MAX_ORDER) + return -ENOMEM; + + dma_map = kzalloc(sizeof(struct dma_mapping), GFP_KERNEL); + if (dma_map == NULL) + return -ENOMEM; + + genwqe_mapping_init(dma_map, GENWQE_MAPPING_RAW); + dma_map->u_vaddr = (void *)vma->vm_start; + dma_map->size = vsize; + dma_map->nr_pages = DIV_ROUND_UP(vsize, PAGE_SIZE); + dma_map->k_vaddr = __genwqe_alloc_consistent(cd, vsize, + &dma_map->dma_addr); + if (dma_map->k_vaddr == NULL) { + rc = -ENOMEM; + goto free_dma_map; + } + + if (capable(CAP_SYS_ADMIN) && (vsize > sizeof(dma_addr_t))) + *(dma_addr_t *)dma_map->k_vaddr = dma_map->dma_addr; + + pfn = virt_to_phys(dma_map->k_vaddr) >> PAGE_SHIFT; + rc = remap_pfn_range(vma, + vma->vm_start, + pfn, + vsize, + vma->vm_page_prot); + if (rc != 0) { + rc = -EFAULT; + goto free_dma_mem; + } + + vma->vm_private_data = cfile; + vma->vm_ops = &genwqe_vma_ops; + __genwqe_add_mapping(cfile, dma_map); + + return 0; + + free_dma_mem: + __genwqe_free_consistent(cd, dma_map->size, + dma_map->k_vaddr, + dma_map->dma_addr); + free_dma_map: + kfree(dma_map); + return rc; +} + +#define FLASH_BLOCK 0x40000 /* we use 256k blocks */ + +/** + * do_flash_update() - Excute flash update (write image or CVPD) + * @cfile: Descriptor of opened file + * @load: details about image load + * + * Return: 0 if successful + */ +static int do_flash_update(struct genwqe_file *cfile, + struct genwqe_bitstream *load) +{ + int rc = 0; + int blocks_to_flash; + dma_addr_t dma_addr; + u64 flash = 0; + size_t tocopy = 0; + u8 __user *buf; + u8 *xbuf; + u32 crc; + u8 cmdopts; + struct genwqe_dev *cd = cfile->cd; + struct file *filp = cfile->filp; + struct pci_dev *pci_dev = cd->pci_dev; + + if ((load->size & 0x3) != 0) + return -EINVAL; + + if (((unsigned long)(load->data_addr) & ~PAGE_MASK) != 0) + return -EINVAL; + + /* FIXME Bits have changed for new service layer! */ + switch ((char)load->partition) { + case '0': + cmdopts = 0x14; + break; /* download/erase_first/part_0 */ + case '1': + cmdopts = 0x1C; + break; /* download/erase_first/part_1 */ + case 'v': + cmdopts = 0x0C; + break; /* download/erase_first/vpd */ + default: + return -EINVAL; + } + + buf = (u8 __user *)load->data_addr; + xbuf = __genwqe_alloc_consistent(cd, FLASH_BLOCK, &dma_addr); + if (xbuf == NULL) + return -ENOMEM; + + blocks_to_flash = load->size / FLASH_BLOCK; + while (load->size) { + struct genwqe_ddcb_cmd *req; + + /* + * We must be 4 byte aligned. Buffer must be 0 appened + * to have defined values when calculating CRC. + */ + tocopy = min_t(size_t, load->size, FLASH_BLOCK); + + rc = copy_from_user(xbuf, buf, tocopy); + if (rc) { + rc = -EFAULT; + goto free_buffer; + } + crc = genwqe_crc32(xbuf, tocopy, 0xffffffff); + + dev_dbg(&pci_dev->dev, + "[%s] DMA: %lx CRC: %08x SZ: %ld %d\n", + __func__, (unsigned long)dma_addr, crc, tocopy, + blocks_to_flash); + + /* prepare DDCB for SLU process */ + req = ddcb_requ_alloc(); + if (req == NULL) { + rc = -ENOMEM; + goto free_buffer; + } + + req->cmd = SLCMD_MOVE_FLASH; + req->cmdopts = cmdopts; + + /* prepare invariant values */ + if (genwqe_get_slu_id(cd) <= 0x2) { + *(__be64 *)&req->__asiv[0] = cpu_to_be64(dma_addr); + *(__be64 *)&req->__asiv[8] = cpu_to_be64(tocopy); + *(__be64 *)&req->__asiv[16] = cpu_to_be64(flash); + *(__be32 *)&req->__asiv[24] = cpu_to_be32(0); + req->__asiv[24] = load->uid; + *(__be32 *)&req->__asiv[28] = cpu_to_be32(crc); + + /* for simulation only */ + *(__be64 *)&req->__asiv[88] = cpu_to_be64(load->slu_id); + *(__be64 *)&req->__asiv[96] = cpu_to_be64(load->app_id); + req->asiv_length = 32; /* bytes included in crc calc */ + } else { /* setup DDCB for ATS architecture */ + *(__be64 *)&req->asiv[0] = cpu_to_be64(dma_addr); + *(__be32 *)&req->asiv[8] = cpu_to_be32(tocopy); + *(__be32 *)&req->asiv[12] = cpu_to_be32(0); /* resvd */ + *(__be64 *)&req->asiv[16] = cpu_to_be64(flash); + *(__be32 *)&req->asiv[24] = cpu_to_be32(load->uid<<24); + *(__be32 *)&req->asiv[28] = cpu_to_be32(crc); + + /* for simulation only */ + *(__be64 *)&req->asiv[80] = cpu_to_be64(load->slu_id); + *(__be64 *)&req->asiv[88] = cpu_to_be64(load->app_id); + + /* Rd only */ + req->ats = 0x4ULL << 44; + req->asiv_length = 40; /* bytes included in crc calc */ + } + req->asv_length = 8; + + /* For Genwqe5 we get back the calculated CRC */ + *(u64 *)&req->asv[0] = 0ULL; /* 0x80 */ + + rc = __genwqe_execute_raw_ddcb(cd, req, filp->f_flags); + + load->retc = req->retc; + load->attn = req->attn; + load->progress = req->progress; + + if (rc < 0) { + ddcb_requ_free(req); + goto free_buffer; + } + + if (req->retc != DDCB_RETC_COMPLETE) { + rc = -EIO; + ddcb_requ_free(req); + goto free_buffer; + } + + load->size -= tocopy; + flash += tocopy; + buf += tocopy; + blocks_to_flash--; + ddcb_requ_free(req); + } + + free_buffer: + __genwqe_free_consistent(cd, FLASH_BLOCK, xbuf, dma_addr); + return rc; +} + +static int do_flash_read(struct genwqe_file *cfile, + struct genwqe_bitstream *load) +{ + int rc, blocks_to_flash; + dma_addr_t dma_addr; + u64 flash = 0; + size_t tocopy = 0; + u8 __user *buf; + u8 *xbuf; + u8 cmdopts; + struct genwqe_dev *cd = cfile->cd; + struct file *filp = cfile->filp; + struct pci_dev *pci_dev = cd->pci_dev; + struct genwqe_ddcb_cmd *cmd; + + if ((load->size & 0x3) != 0) + return -EINVAL; + + if (((unsigned long)(load->data_addr) & ~PAGE_MASK) != 0) + return -EINVAL; + + /* FIXME Bits have changed for new service layer! */ + switch ((char)load->partition) { + case '0': + cmdopts = 0x12; + break; /* upload/part_0 */ + case '1': + cmdopts = 0x1A; + break; /* upload/part_1 */ + case 'v': + cmdopts = 0x0A; + break; /* upload/vpd */ + default: + return -EINVAL; + } + + buf = (u8 __user *)load->data_addr; + xbuf = __genwqe_alloc_consistent(cd, FLASH_BLOCK, &dma_addr); + if (xbuf == NULL) + return -ENOMEM; + + blocks_to_flash = load->size / FLASH_BLOCK; + while (load->size) { + /* + * We must be 4 byte aligned. Buffer must be 0 appened + * to have defined values when calculating CRC. + */ + tocopy = min_t(size_t, load->size, FLASH_BLOCK); + + dev_dbg(&pci_dev->dev, + "[%s] DMA: %lx SZ: %ld %d\n", + __func__, (unsigned long)dma_addr, tocopy, + blocks_to_flash); + + /* prepare DDCB for SLU process */ + cmd = ddcb_requ_alloc(); + if (cmd == NULL) { + rc = -ENOMEM; + goto free_buffer; + } + cmd->cmd = SLCMD_MOVE_FLASH; + cmd->cmdopts = cmdopts; + + /* prepare invariant values */ + if (genwqe_get_slu_id(cd) <= 0x2) { + *(__be64 *)&cmd->__asiv[0] = cpu_to_be64(dma_addr); + *(__be64 *)&cmd->__asiv[8] = cpu_to_be64(tocopy); + *(__be64 *)&cmd->__asiv[16] = cpu_to_be64(flash); + *(__be32 *)&cmd->__asiv[24] = cpu_to_be32(0); + cmd->__asiv[24] = load->uid; + *(__be32 *)&cmd->__asiv[28] = cpu_to_be32(0) /* CRC */; + cmd->asiv_length = 32; /* bytes included in crc calc */ + } else { /* setup DDCB for ATS architecture */ + *(__be64 *)&cmd->asiv[0] = cpu_to_be64(dma_addr); + *(__be32 *)&cmd->asiv[8] = cpu_to_be32(tocopy); + *(__be32 *)&cmd->asiv[12] = cpu_to_be32(0); /* resvd */ + *(__be64 *)&cmd->asiv[16] = cpu_to_be64(flash); + *(__be32 *)&cmd->asiv[24] = cpu_to_be32(load->uid<<24); + *(__be32 *)&cmd->asiv[28] = cpu_to_be32(0); /* CRC */ + + /* rd/wr */ + cmd->ats = 0x5ULL << 44; + cmd->asiv_length = 40; /* bytes included in crc calc */ + } + cmd->asv_length = 8; + + /* we only get back the calculated CRC */ + *(u64 *)&cmd->asv[0] = 0ULL; /* 0x80 */ + + rc = __genwqe_execute_raw_ddcb(cd, cmd, filp->f_flags); + + load->retc = cmd->retc; + load->attn = cmd->attn; + load->progress = cmd->progress; + + if ((rc < 0) && (rc != -EBADMSG)) { + ddcb_requ_free(cmd); + goto free_buffer; + } + + rc = copy_to_user(buf, xbuf, tocopy); + if (rc) { + rc = -EFAULT; + ddcb_requ_free(cmd); + goto free_buffer; + } + + /* We know that we can get retc 0x104 with CRC err */ + if (((cmd->retc == DDCB_RETC_FAULT) && + (cmd->attn != 0x02)) || /* Normally ignore CRC error */ + ((cmd->retc == DDCB_RETC_COMPLETE) && + (cmd->attn != 0x00))) { /* Everything was fine */ + rc = -EIO; + ddcb_requ_free(cmd); + goto free_buffer; + } + + load->size -= tocopy; + flash += tocopy; + buf += tocopy; + blocks_to_flash--; + ddcb_requ_free(cmd); + } + rc = 0; + + free_buffer: + __genwqe_free_consistent(cd, FLASH_BLOCK, xbuf, dma_addr); + return rc; +} + +static int genwqe_pin_mem(struct genwqe_file *cfile, struct genwqe_mem *m) +{ + int rc; + struct genwqe_dev *cd = cfile->cd; + struct pci_dev *pci_dev = cfile->cd->pci_dev; + struct dma_mapping *dma_map; + unsigned long map_addr; + unsigned long map_size; + + if ((m->addr == 0x0) || (m->size == 0)) + return -EINVAL; + if (m->size > ULONG_MAX - PAGE_SIZE - (m->addr & ~PAGE_MASK)) + return -EINVAL; + + map_addr = (m->addr & PAGE_MASK); + map_size = round_up(m->size + (m->addr & ~PAGE_MASK), PAGE_SIZE); + + dma_map = kzalloc(sizeof(struct dma_mapping), GFP_KERNEL); + if (dma_map == NULL) + return -ENOMEM; + + genwqe_mapping_init(dma_map, GENWQE_MAPPING_SGL_PINNED); + rc = genwqe_user_vmap(cd, dma_map, (void *)map_addr, map_size); + if (rc != 0) { + dev_err(&pci_dev->dev, + "[%s] genwqe_user_vmap rc=%d\n", __func__, rc); + kfree(dma_map); + return rc; + } + + genwqe_add_pin(cfile, dma_map); + return 0; +} + +static int genwqe_unpin_mem(struct genwqe_file *cfile, struct genwqe_mem *m) +{ + struct genwqe_dev *cd = cfile->cd; + struct dma_mapping *dma_map; + unsigned long map_addr; + unsigned long map_size; + + if (m->addr == 0x0) + return -EINVAL; + + map_addr = (m->addr & PAGE_MASK); + map_size = round_up(m->size + (m->addr & ~PAGE_MASK), PAGE_SIZE); + + dma_map = genwqe_search_pin(cfile, map_addr, map_size, NULL); + if (dma_map == NULL) + return -ENOENT; + + genwqe_del_pin(cfile, dma_map); + genwqe_user_vunmap(cd, dma_map); + kfree(dma_map); + return 0; +} + +/** + * ddcb_cmd_cleanup() - Remove dynamically created fixup entries + * @cfile: Descriptor of opened file + * @req: DDCB work request + * + * Only if there are any. Pinnings are not removed. + */ +static int ddcb_cmd_cleanup(struct genwqe_file *cfile, struct ddcb_requ *req) +{ + unsigned int i; + struct dma_mapping *dma_map; + struct genwqe_dev *cd = cfile->cd; + + for (i = 0; i < DDCB_FIXUPS; i++) { + dma_map = &req->dma_mappings[i]; + + if (dma_mapping_used(dma_map)) { + __genwqe_del_mapping(cfile, dma_map); + genwqe_user_vunmap(cd, dma_map); + } + if (req->sgls[i].sgl != NULL) + genwqe_free_sync_sgl(cd, &req->sgls[i]); + } + return 0; +} + +/** + * ddcb_cmd_fixups() - Establish DMA fixups/sglists for user memory references + * @cfile: Descriptor of opened file + * @req: DDCB work request + * + * Before the DDCB gets executed we need to handle the fixups. We + * replace the user-space addresses with DMA addresses or do + * additional setup work e.g. generating a scatter-gather list which + * is used to describe the memory referred to in the fixup. + */ +static int ddcb_cmd_fixups(struct genwqe_file *cfile, struct ddcb_requ *req) +{ + int rc; + unsigned int asiv_offs, i; + struct genwqe_dev *cd = cfile->cd; + struct genwqe_ddcb_cmd *cmd = &req->cmd; + struct dma_mapping *m; + + for (i = 0, asiv_offs = 0x00; asiv_offs <= 0x58; + i++, asiv_offs += 0x08) { + + u64 u_addr; + dma_addr_t d_addr; + u32 u_size = 0; + u64 ats_flags; + + ats_flags = ATS_GET_FLAGS(cmd->ats, asiv_offs); + + switch (ats_flags) { + + case ATS_TYPE_DATA: + break; /* nothing to do here */ + + case ATS_TYPE_FLAT_RDWR: + case ATS_TYPE_FLAT_RD: { + u_addr = be64_to_cpu(*((__be64 *)&cmd-> + asiv[asiv_offs])); + u_size = be32_to_cpu(*((__be32 *)&cmd-> + asiv[asiv_offs + 0x08])); + + /* + * No data available. Ignore u_addr in this + * case and set addr to 0. Hardware must not + * fetch the buffer. + */ + if (u_size == 0x0) { + *((__be64 *)&cmd->asiv[asiv_offs]) = + cpu_to_be64(0x0); + break; + } + + m = __genwqe_search_mapping(cfile, u_addr, u_size, + &d_addr, NULL); + if (m == NULL) { + rc = -EFAULT; + goto err_out; + } + + *((__be64 *)&cmd->asiv[asiv_offs]) = + cpu_to_be64(d_addr); + break; + } + + case ATS_TYPE_SGL_RDWR: + case ATS_TYPE_SGL_RD: { + int page_offs; + + u_addr = be64_to_cpu(*((__be64 *) + &cmd->asiv[asiv_offs])); + u_size = be32_to_cpu(*((__be32 *) + &cmd->asiv[asiv_offs + 0x08])); + + /* + * No data available. Ignore u_addr in this + * case and set addr to 0. Hardware must not + * fetch the empty sgl. + */ + if (u_size == 0x0) { + *((__be64 *)&cmd->asiv[asiv_offs]) = + cpu_to_be64(0x0); + break; + } + + m = genwqe_search_pin(cfile, u_addr, u_size, NULL); + if (m != NULL) { + page_offs = (u_addr - + (u64)m->u_vaddr)/PAGE_SIZE; + } else { + m = &req->dma_mappings[i]; + + genwqe_mapping_init(m, + GENWQE_MAPPING_SGL_TEMP); + + if (ats_flags == ATS_TYPE_SGL_RD) + m->write = 0; + + rc = genwqe_user_vmap(cd, m, (void *)u_addr, + u_size); + if (rc != 0) + goto err_out; + + __genwqe_add_mapping(cfile, m); + page_offs = 0; + } + + /* create genwqe style scatter gather list */ + rc = genwqe_alloc_sync_sgl(cd, &req->sgls[i], + (void __user *)u_addr, + u_size, m->write); + if (rc != 0) + goto err_out; + + genwqe_setup_sgl(cd, &req->sgls[i], + &m->dma_list[page_offs]); + + *((__be64 *)&cmd->asiv[asiv_offs]) = + cpu_to_be64(req->sgls[i].sgl_dma_addr); + + break; + } + default: + rc = -EINVAL; + goto err_out; + } + } + return 0; + + err_out: + ddcb_cmd_cleanup(cfile, req); + return rc; +} + +/** + * genwqe_execute_ddcb() - Execute DDCB using userspace address fixups + * @cfile: Descriptor of opened file + * @cmd: Command identifier (passed from user) + * + * The code will build up the translation tables or lookup the + * contignous memory allocation table to find the right translations + * and DMA addresses. + */ +static int genwqe_execute_ddcb(struct genwqe_file *cfile, + struct genwqe_ddcb_cmd *cmd) +{ + int rc; + struct genwqe_dev *cd = cfile->cd; + struct file *filp = cfile->filp; + struct ddcb_requ *req = container_of(cmd, struct ddcb_requ, cmd); + + rc = ddcb_cmd_fixups(cfile, req); + if (rc != 0) + return rc; + + rc = __genwqe_execute_raw_ddcb(cd, cmd, filp->f_flags); + ddcb_cmd_cleanup(cfile, req); + return rc; +} + +static int do_execute_ddcb(struct genwqe_file *cfile, + unsigned long arg, int raw) +{ + int rc; + struct genwqe_ddcb_cmd *cmd; + struct genwqe_dev *cd = cfile->cd; + struct file *filp = cfile->filp; + + cmd = ddcb_requ_alloc(); + if (cmd == NULL) + return -ENOMEM; + + if (copy_from_user(cmd, (void __user *)arg, sizeof(*cmd))) { + ddcb_requ_free(cmd); + return -EFAULT; + } + + if (!raw) + rc = genwqe_execute_ddcb(cfile, cmd); + else + rc = __genwqe_execute_raw_ddcb(cd, cmd, filp->f_flags); + + /* Copy back only the modifed fields. Do not copy ASIV + back since the copy got modified by the driver. */ + if (copy_to_user((void __user *)arg, cmd, + sizeof(*cmd) - DDCB_ASIV_LENGTH)) { + ddcb_requ_free(cmd); + return -EFAULT; + } + + ddcb_requ_free(cmd); + return rc; +} + +/** + * genwqe_ioctl() - IO control + * @filp: file handle + * @cmd: command identifier (passed from user) + * @arg: argument (passed from user) + * + * Return: 0 success + */ +static long genwqe_ioctl(struct file *filp, unsigned int cmd, + unsigned long arg) +{ + int rc = 0; + struct genwqe_file *cfile = (struct genwqe_file *)filp->private_data; + struct genwqe_dev *cd = cfile->cd; + struct pci_dev *pci_dev = cd->pci_dev; + struct genwqe_reg_io __user *io; + u64 val; + u32 reg_offs; + + /* Return -EIO if card hit EEH */ + if (pci_channel_offline(pci_dev)) + return -EIO; + + if (_IOC_TYPE(cmd) != GENWQE_IOC_CODE) + return -EINVAL; + + switch (cmd) { + + case GENWQE_GET_CARD_STATE: + put_user(cd->card_state, (enum genwqe_card_state __user *)arg); + return 0; + + /* Register access */ + case GENWQE_READ_REG64: { + io = (struct genwqe_reg_io __user *)arg; + + if (get_user(reg_offs, &io->num)) + return -EFAULT; + + if ((reg_offs >= cd->mmio_len) || (reg_offs & 0x7)) + return -EINVAL; + + val = __genwqe_readq(cd, reg_offs); + put_user(val, &io->val64); + return 0; + } + + case GENWQE_WRITE_REG64: { + io = (struct genwqe_reg_io __user *)arg; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + if ((filp->f_flags & O_ACCMODE) == O_RDONLY) + return -EPERM; + + if (get_user(reg_offs, &io->num)) + return -EFAULT; + + if ((reg_offs >= cd->mmio_len) || (reg_offs & 0x7)) + return -EINVAL; + + if (get_user(val, &io->val64)) + return -EFAULT; + + __genwqe_writeq(cd, reg_offs, val); + return 0; + } + + case GENWQE_READ_REG32: { + io = (struct genwqe_reg_io __user *)arg; + + if (get_user(reg_offs, &io->num)) + return -EFAULT; + + if ((reg_offs >= cd->mmio_len) || (reg_offs & 0x3)) + return -EINVAL; + + val = __genwqe_readl(cd, reg_offs); + put_user(val, &io->val64); + return 0; + } + + case GENWQE_WRITE_REG32: { + io = (struct genwqe_reg_io __user *)arg; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + if ((filp->f_flags & O_ACCMODE) == O_RDONLY) + return -EPERM; + + if (get_user(reg_offs, &io->num)) + return -EFAULT; + + if ((reg_offs >= cd->mmio_len) || (reg_offs & 0x3)) + return -EINVAL; + + if (get_user(val, &io->val64)) + return -EFAULT; + + __genwqe_writel(cd, reg_offs, val); + return 0; + } + + /* Flash update/reading */ + case GENWQE_SLU_UPDATE: { + struct genwqe_bitstream load; + + if (!genwqe_is_privileged(cd)) + return -EPERM; + + if ((filp->f_flags & O_ACCMODE) == O_RDONLY) + return -EPERM; + + if (copy_from_user(&load, (void __user *)arg, + sizeof(load))) + return -EFAULT; + + rc = do_flash_update(cfile, &load); + + if (copy_to_user((void __user *)arg, &load, sizeof(load))) + return -EFAULT; + + return rc; + } + + case GENWQE_SLU_READ: { + struct genwqe_bitstream load; + + if (!genwqe_is_privileged(cd)) + return -EPERM; + + if (genwqe_flash_readback_fails(cd)) + return -ENOSPC; /* known to fail for old versions */ + + if (copy_from_user(&load, (void __user *)arg, sizeof(load))) + return -EFAULT; + + rc = do_flash_read(cfile, &load); + + if (copy_to_user((void __user *)arg, &load, sizeof(load))) + return -EFAULT; + + return rc; + } + + /* memory pinning and unpinning */ + case GENWQE_PIN_MEM: { + struct genwqe_mem m; + + if (copy_from_user(&m, (void __user *)arg, sizeof(m))) + return -EFAULT; + + return genwqe_pin_mem(cfile, &m); + } + + case GENWQE_UNPIN_MEM: { + struct genwqe_mem m; + + if (copy_from_user(&m, (void __user *)arg, sizeof(m))) + return -EFAULT; + + return genwqe_unpin_mem(cfile, &m); + } + + /* launch an DDCB and wait for completion */ + case GENWQE_EXECUTE_DDCB: + return do_execute_ddcb(cfile, arg, 0); + + case GENWQE_EXECUTE_RAW_DDCB: { + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + return do_execute_ddcb(cfile, arg, 1); + } + + default: + return -EINVAL; + } + + return rc; +} + +static const struct file_operations genwqe_fops = { + .owner = THIS_MODULE, + .open = genwqe_open, + .fasync = genwqe_fasync, + .mmap = genwqe_mmap, + .unlocked_ioctl = genwqe_ioctl, + .compat_ioctl = compat_ptr_ioctl, + .release = genwqe_release, +}; + +static int genwqe_device_initialized(struct genwqe_dev *cd) +{ + return cd->dev != NULL; +} + +/** + * genwqe_device_create() - Create and configure genwqe char device + * @cd: genwqe device descriptor + * + * This function must be called before we create any more genwqe + * character devices, because it is allocating the major and minor + * number which are supposed to be used by the client drivers. + */ +int genwqe_device_create(struct genwqe_dev *cd) +{ + int rc; + struct pci_dev *pci_dev = cd->pci_dev; + + /* + * Here starts the individual setup per client. It must + * initialize its own cdev data structure with its own fops. + * The appropriate devnum needs to be created. The ranges must + * not overlap. + */ + rc = alloc_chrdev_region(&cd->devnum_genwqe, 0, + GENWQE_MAX_MINOR, GENWQE_DEVNAME); + if (rc < 0) { + dev_err(&pci_dev->dev, "err: alloc_chrdev_region failed\n"); + goto err_dev; + } + + cdev_init(&cd->cdev_genwqe, &genwqe_fops); + cd->cdev_genwqe.owner = THIS_MODULE; + + rc = cdev_add(&cd->cdev_genwqe, cd->devnum_genwqe, 1); + if (rc < 0) { + dev_err(&pci_dev->dev, "err: cdev_add failed\n"); + goto err_add; + } + + /* + * Finally the device in /dev/... must be created. The rule is + * to use card%d_clientname for each created device. + */ + cd->dev = device_create_with_groups(cd->class_genwqe, + &cd->pci_dev->dev, + cd->devnum_genwqe, cd, + genwqe_attribute_groups, + GENWQE_DEVNAME "%u_card", + cd->card_idx); + if (IS_ERR(cd->dev)) { + rc = PTR_ERR(cd->dev); + goto err_cdev; + } + + genwqe_init_debugfs(cd); + + return 0; + + err_cdev: + cdev_del(&cd->cdev_genwqe); + err_add: + unregister_chrdev_region(cd->devnum_genwqe, GENWQE_MAX_MINOR); + err_dev: + cd->dev = NULL; + return rc; +} + +static int genwqe_inform_and_stop_processes(struct genwqe_dev *cd) +{ + int rc; + unsigned int i; + struct pci_dev *pci_dev = cd->pci_dev; + + if (!genwqe_open_files(cd)) + return 0; + + dev_warn(&pci_dev->dev, "[%s] send SIGIO and wait ...\n", __func__); + + rc = genwqe_kill_fasync(cd, SIGIO); + if (rc > 0) { + /* give kill_timeout seconds to close file descriptors ... */ + for (i = 0; (i < GENWQE_KILL_TIMEOUT) && + genwqe_open_files(cd); i++) { + dev_info(&pci_dev->dev, " %d sec ...", i); + + cond_resched(); + msleep(1000); + } + + /* if no open files we can safely continue, else ... */ + if (!genwqe_open_files(cd)) + return 0; + + dev_warn(&pci_dev->dev, + "[%s] send SIGKILL and wait ...\n", __func__); + + rc = genwqe_terminate(cd); + if (rc) { + /* Give kill_timout more seconds to end processes */ + for (i = 0; (i < GENWQE_KILL_TIMEOUT) && + genwqe_open_files(cd); i++) { + dev_warn(&pci_dev->dev, " %d sec ...", i); + + cond_resched(); + msleep(1000); + } + } + } + return 0; +} + +/** + * genwqe_device_remove() - Remove genwqe's char device + * @cd: GenWQE device information + * + * This function must be called after the client devices are removed + * because it will free the major/minor number range for the genwqe + * drivers. + * + * This function must be robust enough to be called twice. + */ +int genwqe_device_remove(struct genwqe_dev *cd) +{ + int rc; + struct pci_dev *pci_dev = cd->pci_dev; + + if (!genwqe_device_initialized(cd)) + return 1; + + genwqe_inform_and_stop_processes(cd); + + /* + * We currently do wait until all filedescriptors are + * closed. This leads to a problem when we abort the + * application which will decrease this reference from + * 1/unused to 0/illegal and not from 2/used 1/empty. + */ + rc = kref_read(&cd->cdev_genwqe.kobj.kref); + if (rc != 1) { + dev_err(&pci_dev->dev, + "[%s] err: cdev_genwqe...refcount=%d\n", __func__, rc); + panic("Fatal err: cannot free resources with pending references!"); + } + + genqwe_exit_debugfs(cd); + device_destroy(cd->class_genwqe, cd->devnum_genwqe); + cdev_del(&cd->cdev_genwqe); + unregister_chrdev_region(cd->devnum_genwqe, GENWQE_MAX_MINOR); + cd->dev = NULL; + + return 0; +} diff --git a/drivers/misc/genwqe/card_sysfs.c b/drivers/misc/genwqe/card_sysfs.c new file mode 100644 index 000000000..b2f115602 --- /dev/null +++ b/drivers/misc/genwqe/card_sysfs.c @@ -0,0 +1,295 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * IBM Accelerator Family 'GenWQE' + * + * (C) Copyright IBM Corp. 2013 + * + * Author: Frank Haverkamp <haver@linux.vnet.ibm.com> + * Author: Joerg-Stephan Vogt <jsvogt@de.ibm.com> + * Author: Michael Jung <mijung@gmx.net> + * Author: Michael Ruettger <michael@ibmra.de> + */ + +/* + * Sysfs interfaces for the GenWQE card. There are attributes to query + * the version of the bitstream as well as some for the driver. For + * debugging, please also see the debugfs interfaces of this driver. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/string.h> +#include <linux/fs.h> +#include <linux/sysfs.h> +#include <linux/ctype.h> +#include <linux/device.h> + +#include "card_base.h" +#include "card_ddcb.h" + +static const char * const genwqe_types[] = { + [GENWQE_TYPE_ALTERA_230] = "GenWQE4-230", + [GENWQE_TYPE_ALTERA_530] = "GenWQE4-530", + [GENWQE_TYPE_ALTERA_A4] = "GenWQE5-A4", + [GENWQE_TYPE_ALTERA_A7] = "GenWQE5-A7", +}; + +static ssize_t status_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct genwqe_dev *cd = dev_get_drvdata(dev); + const char *cs[GENWQE_CARD_STATE_MAX] = { "unused", "used", "error" }; + + return sprintf(buf, "%s\n", cs[cd->card_state]); +} +static DEVICE_ATTR_RO(status); + +static ssize_t appid_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + char app_name[5]; + struct genwqe_dev *cd = dev_get_drvdata(dev); + + genwqe_read_app_id(cd, app_name, sizeof(app_name)); + return sprintf(buf, "%s\n", app_name); +} +static DEVICE_ATTR_RO(appid); + +static ssize_t version_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + u64 slu_id, app_id; + struct genwqe_dev *cd = dev_get_drvdata(dev); + + slu_id = __genwqe_readq(cd, IO_SLU_UNITCFG); + app_id = __genwqe_readq(cd, IO_APP_UNITCFG); + + return sprintf(buf, "%016llx.%016llx\n", slu_id, app_id); +} +static DEVICE_ATTR_RO(version); + +static ssize_t type_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + u8 card_type; + struct genwqe_dev *cd = dev_get_drvdata(dev); + + card_type = genwqe_card_type(cd); + return sprintf(buf, "%s\n", (card_type >= ARRAY_SIZE(genwqe_types)) ? + "invalid" : genwqe_types[card_type]); +} +static DEVICE_ATTR_RO(type); + +static ssize_t tempsens_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + u64 tempsens; + struct genwqe_dev *cd = dev_get_drvdata(dev); + + tempsens = __genwqe_readq(cd, IO_SLU_TEMPERATURE_SENSOR); + return sprintf(buf, "%016llx\n", tempsens); +} +static DEVICE_ATTR_RO(tempsens); + +static ssize_t freerunning_timer_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + u64 t; + struct genwqe_dev *cd = dev_get_drvdata(dev); + + t = __genwqe_readq(cd, IO_SLC_FREE_RUNNING_TIMER); + return sprintf(buf, "%016llx\n", t); +} +static DEVICE_ATTR_RO(freerunning_timer); + +static ssize_t queue_working_time_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + u64 t; + struct genwqe_dev *cd = dev_get_drvdata(dev); + + t = __genwqe_readq(cd, IO_SLC_QUEUE_WTIME); + return sprintf(buf, "%016llx\n", t); +} +static DEVICE_ATTR_RO(queue_working_time); + +static ssize_t base_clock_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + u64 base_clock; + struct genwqe_dev *cd = dev_get_drvdata(dev); + + base_clock = genwqe_base_clock_frequency(cd); + return sprintf(buf, "%lld\n", base_clock); +} +static DEVICE_ATTR_RO(base_clock); + +/* + * curr_bitstream_show() - Show the current bitstream id + * + * There is a bug in some old versions of the CPLD which selects the + * bitstream, which causes the IO_SLU_BITSTREAM register to report + * unreliable data in very rare cases. This makes this sysfs + * unreliable up to the point were a new CPLD version is being used. + * + * Unfortunately there is no automatic way yet to query the CPLD + * version, such that you need to manually ensure via programming + * tools that you have a recent version of the CPLD software. + * + * The proposed circumvention is to use a special recovery bitstream + * on the backup partition (0) to identify problems while loading the + * image. + */ +static ssize_t curr_bitstream_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int curr_bitstream; + struct genwqe_dev *cd = dev_get_drvdata(dev); + + curr_bitstream = __genwqe_readq(cd, IO_SLU_BITSTREAM) & 0x1; + return sprintf(buf, "%d\n", curr_bitstream); +} +static DEVICE_ATTR_RO(curr_bitstream); + +/* + * next_bitstream_show() - Show the next activated bitstream + * + * IO_SLC_CFGREG_SOFTRESET: This register can only be accessed by the PF. + */ +static ssize_t next_bitstream_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int next_bitstream; + struct genwqe_dev *cd = dev_get_drvdata(dev); + + switch ((cd->softreset & 0xc) >> 2) { + case 0x2: + next_bitstream = 0; + break; + case 0x3: + next_bitstream = 1; + break; + default: + next_bitstream = -1; + break; /* error */ + } + return sprintf(buf, "%d\n", next_bitstream); +} + +static ssize_t next_bitstream_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int partition; + struct genwqe_dev *cd = dev_get_drvdata(dev); + + if (kstrtoint(buf, 0, &partition) < 0) + return -EINVAL; + + switch (partition) { + case 0x0: + cd->softreset = 0x78; + break; + case 0x1: + cd->softreset = 0x7c; + break; + default: + return -EINVAL; + } + + __genwqe_writeq(cd, IO_SLC_CFGREG_SOFTRESET, cd->softreset); + return count; +} +static DEVICE_ATTR_RW(next_bitstream); + +static ssize_t reload_bitstream_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int reload; + struct genwqe_dev *cd = dev_get_drvdata(dev); + + if (kstrtoint(buf, 0, &reload) < 0) + return -EINVAL; + + if (reload == 0x1) { + if (cd->card_state == GENWQE_CARD_UNUSED || + cd->card_state == GENWQE_CARD_USED) + cd->card_state = GENWQE_CARD_RELOAD_BITSTREAM; + else + return -EIO; + } else { + return -EINVAL; + } + + return count; +} +static DEVICE_ATTR_WO(reload_bitstream); + +/* + * Create device_attribute structures / params: name, mode, show, store + * additional flag if valid in VF + */ +static struct attribute *genwqe_attributes[] = { + &dev_attr_tempsens.attr, + &dev_attr_next_bitstream.attr, + &dev_attr_curr_bitstream.attr, + &dev_attr_base_clock.attr, + &dev_attr_type.attr, + &dev_attr_version.attr, + &dev_attr_appid.attr, + &dev_attr_status.attr, + &dev_attr_freerunning_timer.attr, + &dev_attr_queue_working_time.attr, + &dev_attr_reload_bitstream.attr, + NULL, +}; + +static struct attribute *genwqe_normal_attributes[] = { + &dev_attr_type.attr, + &dev_attr_version.attr, + &dev_attr_appid.attr, + &dev_attr_status.attr, + &dev_attr_freerunning_timer.attr, + &dev_attr_queue_working_time.attr, + NULL, +}; + +/* + * genwqe_is_visible() - Determine if sysfs attribute should be visible or not + * + * VFs have restricted mmio capabilities, so not all sysfs entries + * are allowed in VFs. + */ +static umode_t genwqe_is_visible(struct kobject *kobj, + struct attribute *attr, int n) +{ + unsigned int j; + struct device *dev = kobj_to_dev(kobj); + struct genwqe_dev *cd = dev_get_drvdata(dev); + umode_t mode = attr->mode; + + if (genwqe_is_privileged(cd)) + return mode; + + for (j = 0; genwqe_normal_attributes[j] != NULL; j++) + if (genwqe_normal_attributes[j] == attr) + return mode; + + return 0; +} + +static struct attribute_group genwqe_attribute_group = { + .is_visible = genwqe_is_visible, + .attrs = genwqe_attributes, +}; + +const struct attribute_group *genwqe_attribute_groups[] = { + &genwqe_attribute_group, + NULL, +}; diff --git a/drivers/misc/genwqe/card_utils.c b/drivers/misc/genwqe/card_utils.c new file mode 100644 index 000000000..1167463f2 --- /dev/null +++ b/drivers/misc/genwqe/card_utils.c @@ -0,0 +1,1049 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * IBM Accelerator Family 'GenWQE' + * + * (C) Copyright IBM Corp. 2013 + * + * Author: Frank Haverkamp <haver@linux.vnet.ibm.com> + * Author: Joerg-Stephan Vogt <jsvogt@de.ibm.com> + * Author: Michael Jung <mijung@gmx.net> + * Author: Michael Ruettger <michael@ibmra.de> + */ + +/* + * Miscelanous functionality used in the other GenWQE driver parts. + */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/vmalloc.h> +#include <linux/page-flags.h> +#include <linux/scatterlist.h> +#include <linux/hugetlb.h> +#include <linux/iommu.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/ctype.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/pgtable.h> + +#include "genwqe_driver.h" +#include "card_base.h" +#include "card_ddcb.h" + +/** + * __genwqe_writeq() - Write 64-bit register + * @cd: genwqe device descriptor + * @byte_offs: byte offset within BAR + * @val: 64-bit value + * + * Return: 0 if success; < 0 if error + */ +int __genwqe_writeq(struct genwqe_dev *cd, u64 byte_offs, u64 val) +{ + struct pci_dev *pci_dev = cd->pci_dev; + + if (cd->err_inject & GENWQE_INJECT_HARDWARE_FAILURE) + return -EIO; + + if (cd->mmio == NULL) + return -EIO; + + if (pci_channel_offline(pci_dev)) + return -EIO; + + __raw_writeq((__force u64)cpu_to_be64(val), cd->mmio + byte_offs); + return 0; +} + +/** + * __genwqe_readq() - Read 64-bit register + * @cd: genwqe device descriptor + * @byte_offs: offset within BAR + * + * Return: value from register + */ +u64 __genwqe_readq(struct genwqe_dev *cd, u64 byte_offs) +{ + if (cd->err_inject & GENWQE_INJECT_HARDWARE_FAILURE) + return 0xffffffffffffffffull; + + if ((cd->err_inject & GENWQE_INJECT_GFIR_FATAL) && + (byte_offs == IO_SLC_CFGREG_GFIR)) + return 0x000000000000ffffull; + + if ((cd->err_inject & GENWQE_INJECT_GFIR_INFO) && + (byte_offs == IO_SLC_CFGREG_GFIR)) + return 0x00000000ffff0000ull; + + if (cd->mmio == NULL) + return 0xffffffffffffffffull; + + return be64_to_cpu((__force __be64)__raw_readq(cd->mmio + byte_offs)); +} + +/** + * __genwqe_writel() - Write 32-bit register + * @cd: genwqe device descriptor + * @byte_offs: byte offset within BAR + * @val: 32-bit value + * + * Return: 0 if success; < 0 if error + */ +int __genwqe_writel(struct genwqe_dev *cd, u64 byte_offs, u32 val) +{ + struct pci_dev *pci_dev = cd->pci_dev; + + if (cd->err_inject & GENWQE_INJECT_HARDWARE_FAILURE) + return -EIO; + + if (cd->mmio == NULL) + return -EIO; + + if (pci_channel_offline(pci_dev)) + return -EIO; + + __raw_writel((__force u32)cpu_to_be32(val), cd->mmio + byte_offs); + return 0; +} + +/** + * __genwqe_readl() - Read 32-bit register + * @cd: genwqe device descriptor + * @byte_offs: offset within BAR + * + * Return: Value from register + */ +u32 __genwqe_readl(struct genwqe_dev *cd, u64 byte_offs) +{ + if (cd->err_inject & GENWQE_INJECT_HARDWARE_FAILURE) + return 0xffffffff; + + if (cd->mmio == NULL) + return 0xffffffff; + + return be32_to_cpu((__force __be32)__raw_readl(cd->mmio + byte_offs)); +} + +/** + * genwqe_read_app_id() - Extract app_id + * @cd: genwqe device descriptor + * @app_name: carrier used to pass-back name + * @len: length of data for name + * + * app_unitcfg need to be filled with valid data first + */ +int genwqe_read_app_id(struct genwqe_dev *cd, char *app_name, int len) +{ + int i, j; + u32 app_id = (u32)cd->app_unitcfg; + + memset(app_name, 0, len); + for (i = 0, j = 0; j < min(len, 4); j++) { + char ch = (char)((app_id >> (24 - j*8)) & 0xff); + + if (ch == ' ') + continue; + app_name[i++] = isprint(ch) ? ch : 'X'; + } + return i; +} + +/** + * genwqe_init_crc32() - Prepare a lookup table for fast crc32 calculations + * + * Existing kernel functions seem to use a different polynom, + * therefore we could not use them here. + * + * Genwqe's Polynomial = 0x20044009 + */ +#define CRC32_POLYNOMIAL 0x20044009 +static u32 crc32_tab[256]; /* crc32 lookup table */ + +void genwqe_init_crc32(void) +{ + int i, j; + u32 crc; + + for (i = 0; i < 256; i++) { + crc = i << 24; + for (j = 0; j < 8; j++) { + if (crc & 0x80000000) + crc = (crc << 1) ^ CRC32_POLYNOMIAL; + else + crc = (crc << 1); + } + crc32_tab[i] = crc; + } +} + +/** + * genwqe_crc32() - Generate 32-bit crc as required for DDCBs + * @buff: pointer to data buffer + * @len: length of data for calculation + * @init: initial crc (0xffffffff at start) + * + * polynomial = x^32 * + x^29 + x^18 + x^14 + x^3 + 1 (0x20044009) + * + * Example: 4 bytes 0x01 0x02 0x03 0x04 with init=0xffffffff should + * result in a crc32 of 0xf33cb7d3. + * + * The existing kernel crc functions did not cover this polynom yet. + * + * Return: crc32 checksum. + */ +u32 genwqe_crc32(u8 *buff, size_t len, u32 init) +{ + int i; + u32 crc; + + crc = init; + while (len--) { + i = ((crc >> 24) ^ *buff++) & 0xFF; + crc = (crc << 8) ^ crc32_tab[i]; + } + return crc; +} + +void *__genwqe_alloc_consistent(struct genwqe_dev *cd, size_t size, + dma_addr_t *dma_handle) +{ + if (get_order(size) >= MAX_ORDER) + return NULL; + + return dma_alloc_coherent(&cd->pci_dev->dev, size, dma_handle, + GFP_KERNEL); +} + +void __genwqe_free_consistent(struct genwqe_dev *cd, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + if (vaddr == NULL) + return; + + dma_free_coherent(&cd->pci_dev->dev, size, vaddr, dma_handle); +} + +static void genwqe_unmap_pages(struct genwqe_dev *cd, dma_addr_t *dma_list, + int num_pages) +{ + int i; + struct pci_dev *pci_dev = cd->pci_dev; + + for (i = 0; (i < num_pages) && (dma_list[i] != 0x0); i++) { + dma_unmap_page(&pci_dev->dev, dma_list[i], PAGE_SIZE, + DMA_BIDIRECTIONAL); + dma_list[i] = 0x0; + } +} + +static int genwqe_map_pages(struct genwqe_dev *cd, + struct page **page_list, int num_pages, + dma_addr_t *dma_list) +{ + int i; + struct pci_dev *pci_dev = cd->pci_dev; + + /* establish DMA mapping for requested pages */ + for (i = 0; i < num_pages; i++) { + dma_addr_t daddr; + + dma_list[i] = 0x0; + daddr = dma_map_page(&pci_dev->dev, page_list[i], + 0, /* map_offs */ + PAGE_SIZE, + DMA_BIDIRECTIONAL); /* FIXME rd/rw */ + + if (dma_mapping_error(&pci_dev->dev, daddr)) { + dev_err(&pci_dev->dev, + "[%s] err: no dma addr daddr=%016llx!\n", + __func__, (long long)daddr); + goto err; + } + + dma_list[i] = daddr; + } + return 0; + + err: + genwqe_unmap_pages(cd, dma_list, num_pages); + return -EIO; +} + +static int genwqe_sgl_size(int num_pages) +{ + int len, num_tlb = num_pages / 7; + + len = sizeof(struct sg_entry) * (num_pages+num_tlb + 1); + return roundup(len, PAGE_SIZE); +} + +/* + * genwqe_alloc_sync_sgl() - Allocate memory for sgl and overlapping pages + * + * Allocates memory for sgl and overlapping pages. Pages which might + * overlap other user-space memory blocks are being cached for DMAs, + * such that we do not run into syncronization issues. Data is copied + * from user-space into the cached pages. + */ +int genwqe_alloc_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl, + void __user *user_addr, size_t user_size, int write) +{ + int ret = -ENOMEM; + struct pci_dev *pci_dev = cd->pci_dev; + + sgl->fpage_offs = offset_in_page((unsigned long)user_addr); + sgl->fpage_size = min_t(size_t, PAGE_SIZE-sgl->fpage_offs, user_size); + sgl->nr_pages = DIV_ROUND_UP(sgl->fpage_offs + user_size, PAGE_SIZE); + sgl->lpage_size = (user_size - sgl->fpage_size) % PAGE_SIZE; + + dev_dbg(&pci_dev->dev, "[%s] uaddr=%p usize=%8ld nr_pages=%ld fpage_offs=%lx fpage_size=%ld lpage_size=%ld\n", + __func__, user_addr, user_size, sgl->nr_pages, + sgl->fpage_offs, sgl->fpage_size, sgl->lpage_size); + + sgl->user_addr = user_addr; + sgl->user_size = user_size; + sgl->write = write; + sgl->sgl_size = genwqe_sgl_size(sgl->nr_pages); + + if (get_order(sgl->sgl_size) > MAX_ORDER) { + dev_err(&pci_dev->dev, + "[%s] err: too much memory requested!\n", __func__); + return ret; + } + + sgl->sgl = __genwqe_alloc_consistent(cd, sgl->sgl_size, + &sgl->sgl_dma_addr); + if (sgl->sgl == NULL) { + dev_err(&pci_dev->dev, + "[%s] err: no memory available!\n", __func__); + return ret; + } + + /* Only use buffering on incomplete pages */ + if ((sgl->fpage_size != 0) && (sgl->fpage_size != PAGE_SIZE)) { + sgl->fpage = __genwqe_alloc_consistent(cd, PAGE_SIZE, + &sgl->fpage_dma_addr); + if (sgl->fpage == NULL) + goto err_out; + + /* Sync with user memory */ + if (copy_from_user(sgl->fpage + sgl->fpage_offs, + user_addr, sgl->fpage_size)) { + ret = -EFAULT; + goto err_out; + } + } + if (sgl->lpage_size != 0) { + sgl->lpage = __genwqe_alloc_consistent(cd, PAGE_SIZE, + &sgl->lpage_dma_addr); + if (sgl->lpage == NULL) + goto err_out1; + + /* Sync with user memory */ + if (copy_from_user(sgl->lpage, user_addr + user_size - + sgl->lpage_size, sgl->lpage_size)) { + ret = -EFAULT; + goto err_out2; + } + } + return 0; + + err_out2: + __genwqe_free_consistent(cd, PAGE_SIZE, sgl->lpage, + sgl->lpage_dma_addr); + sgl->lpage = NULL; + sgl->lpage_dma_addr = 0; + err_out1: + __genwqe_free_consistent(cd, PAGE_SIZE, sgl->fpage, + sgl->fpage_dma_addr); + sgl->fpage = NULL; + sgl->fpage_dma_addr = 0; + err_out: + __genwqe_free_consistent(cd, sgl->sgl_size, sgl->sgl, + sgl->sgl_dma_addr); + sgl->sgl = NULL; + sgl->sgl_dma_addr = 0; + sgl->sgl_size = 0; + + return ret; +} + +int genwqe_setup_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl, + dma_addr_t *dma_list) +{ + int i = 0, j = 0, p; + unsigned long dma_offs, map_offs; + dma_addr_t prev_daddr = 0; + struct sg_entry *s, *last_s = NULL; + size_t size = sgl->user_size; + + dma_offs = 128; /* next block if needed/dma_offset */ + map_offs = sgl->fpage_offs; /* offset in first page */ + + s = &sgl->sgl[0]; /* first set of 8 entries */ + p = 0; /* page */ + while (p < sgl->nr_pages) { + dma_addr_t daddr; + unsigned int size_to_map; + + /* always write the chaining entry, cleanup is done later */ + j = 0; + s[j].target_addr = cpu_to_be64(sgl->sgl_dma_addr + dma_offs); + s[j].len = cpu_to_be32(128); + s[j].flags = cpu_to_be32(SG_CHAINED); + j++; + + while (j < 8) { + /* DMA mapping for requested page, offs, size */ + size_to_map = min(size, PAGE_SIZE - map_offs); + + if ((p == 0) && (sgl->fpage != NULL)) { + daddr = sgl->fpage_dma_addr + map_offs; + + } else if ((p == sgl->nr_pages - 1) && + (sgl->lpage != NULL)) { + daddr = sgl->lpage_dma_addr; + } else { + daddr = dma_list[p] + map_offs; + } + + size -= size_to_map; + map_offs = 0; + + if (prev_daddr == daddr) { + u32 prev_len = be32_to_cpu(last_s->len); + + /* pr_info("daddr combining: " + "%016llx/%08x -> %016llx\n", + prev_daddr, prev_len, daddr); */ + + last_s->len = cpu_to_be32(prev_len + + size_to_map); + + p++; /* process next page */ + if (p == sgl->nr_pages) + goto fixup; /* nothing to do */ + + prev_daddr = daddr + size_to_map; + continue; + } + + /* start new entry */ + s[j].target_addr = cpu_to_be64(daddr); + s[j].len = cpu_to_be32(size_to_map); + s[j].flags = cpu_to_be32(SG_DATA); + prev_daddr = daddr + size_to_map; + last_s = &s[j]; + j++; + + p++; /* process next page */ + if (p == sgl->nr_pages) + goto fixup; /* nothing to do */ + } + dma_offs += 128; + s += 8; /* continue 8 elements further */ + } + fixup: + if (j == 1) { /* combining happened on last entry! */ + s -= 8; /* full shift needed on previous sgl block */ + j = 7; /* shift all elements */ + } + + for (i = 0; i < j; i++) /* move elements 1 up */ + s[i] = s[i + 1]; + + s[i].target_addr = cpu_to_be64(0); + s[i].len = cpu_to_be32(0); + s[i].flags = cpu_to_be32(SG_END_LIST); + return 0; +} + +/** + * genwqe_free_sync_sgl() - Free memory for sgl and overlapping pages + * @cd: genwqe device descriptor + * @sgl: scatter gather list describing user-space memory + * + * After the DMA transfer has been completed we free the memory for + * the sgl and the cached pages. Data is being transferred from cached + * pages into user-space buffers. + */ +int genwqe_free_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl) +{ + int rc = 0; + size_t offset; + unsigned long res; + struct pci_dev *pci_dev = cd->pci_dev; + + if (sgl->fpage) { + if (sgl->write) { + res = copy_to_user(sgl->user_addr, + sgl->fpage + sgl->fpage_offs, sgl->fpage_size); + if (res) { + dev_err(&pci_dev->dev, + "[%s] err: copying fpage! (res=%lu)\n", + __func__, res); + rc = -EFAULT; + } + } + __genwqe_free_consistent(cd, PAGE_SIZE, sgl->fpage, + sgl->fpage_dma_addr); + sgl->fpage = NULL; + sgl->fpage_dma_addr = 0; + } + if (sgl->lpage) { + if (sgl->write) { + offset = sgl->user_size - sgl->lpage_size; + res = copy_to_user(sgl->user_addr + offset, sgl->lpage, + sgl->lpage_size); + if (res) { + dev_err(&pci_dev->dev, + "[%s] err: copying lpage! (res=%lu)\n", + __func__, res); + rc = -EFAULT; + } + } + __genwqe_free_consistent(cd, PAGE_SIZE, sgl->lpage, + sgl->lpage_dma_addr); + sgl->lpage = NULL; + sgl->lpage_dma_addr = 0; + } + __genwqe_free_consistent(cd, sgl->sgl_size, sgl->sgl, + sgl->sgl_dma_addr); + + sgl->sgl = NULL; + sgl->sgl_dma_addr = 0x0; + sgl->sgl_size = 0; + return rc; +} + +/** + * genwqe_user_vmap() - Map user-space memory to virtual kernel memory + * @cd: pointer to genwqe device + * @m: mapping params + * @uaddr: user virtual address + * @size: size of memory to be mapped + * + * We need to think about how we could speed this up. Of course it is + * not a good idea to do this over and over again, like we are + * currently doing it. Nevertheless, I am curious where on the path + * the performance is spend. Most probably within the memory + * allocation functions, but maybe also in the DMA mapping code. + * + * Restrictions: The maximum size of the possible mapping currently depends + * on the amount of memory we can get using kzalloc() for the + * page_list and pci_alloc_consistent for the sg_list. + * The sg_list is currently itself not scattered, which could + * be fixed with some effort. The page_list must be split into + * PAGE_SIZE chunks too. All that will make the complicated + * code more complicated. + * + * Return: 0 if success + */ +int genwqe_user_vmap(struct genwqe_dev *cd, struct dma_mapping *m, void *uaddr, + unsigned long size) +{ + int rc = -EINVAL; + unsigned long data, offs; + struct pci_dev *pci_dev = cd->pci_dev; + + if ((uaddr == NULL) || (size == 0)) { + m->size = 0; /* mark unused and not added */ + return -EINVAL; + } + m->u_vaddr = uaddr; + m->size = size; + + /* determine space needed for page_list. */ + data = (unsigned long)uaddr; + offs = offset_in_page(data); + if (size > ULONG_MAX - PAGE_SIZE - offs) { + m->size = 0; /* mark unused and not added */ + return -EINVAL; + } + m->nr_pages = DIV_ROUND_UP(offs + size, PAGE_SIZE); + + m->page_list = kcalloc(m->nr_pages, + sizeof(struct page *) + sizeof(dma_addr_t), + GFP_KERNEL); + if (!m->page_list) { + dev_err(&pci_dev->dev, "err: alloc page_list failed\n"); + m->nr_pages = 0; + m->u_vaddr = NULL; + m->size = 0; /* mark unused and not added */ + return -ENOMEM; + } + m->dma_list = (dma_addr_t *)(m->page_list + m->nr_pages); + + /* pin user pages in memory */ + rc = pin_user_pages_fast(data & PAGE_MASK, /* page aligned addr */ + m->nr_pages, + m->write ? FOLL_WRITE : 0, /* readable/writable */ + m->page_list); /* ptrs to pages */ + if (rc < 0) + goto fail_pin_user_pages; + + /* assumption: pin_user_pages can be killed by signals. */ + if (rc < m->nr_pages) { + unpin_user_pages_dirty_lock(m->page_list, rc, m->write); + rc = -EFAULT; + goto fail_pin_user_pages; + } + + rc = genwqe_map_pages(cd, m->page_list, m->nr_pages, m->dma_list); + if (rc != 0) + goto fail_free_user_pages; + + return 0; + + fail_free_user_pages: + unpin_user_pages_dirty_lock(m->page_list, m->nr_pages, m->write); + + fail_pin_user_pages: + kfree(m->page_list); + m->page_list = NULL; + m->dma_list = NULL; + m->nr_pages = 0; + m->u_vaddr = NULL; + m->size = 0; /* mark unused and not added */ + return rc; +} + +/** + * genwqe_user_vunmap() - Undo mapping of user-space mem to virtual kernel + * memory + * @cd: pointer to genwqe device + * @m: mapping params + */ +int genwqe_user_vunmap(struct genwqe_dev *cd, struct dma_mapping *m) +{ + struct pci_dev *pci_dev = cd->pci_dev; + + if (!dma_mapping_used(m)) { + dev_err(&pci_dev->dev, "[%s] err: mapping %p not used!\n", + __func__, m); + return -EINVAL; + } + + if (m->dma_list) + genwqe_unmap_pages(cd, m->dma_list, m->nr_pages); + + if (m->page_list) { + unpin_user_pages_dirty_lock(m->page_list, m->nr_pages, + m->write); + kfree(m->page_list); + m->page_list = NULL; + m->dma_list = NULL; + m->nr_pages = 0; + } + + m->u_vaddr = NULL; + m->size = 0; /* mark as unused and not added */ + return 0; +} + +/** + * genwqe_card_type() - Get chip type SLU Configuration Register + * @cd: pointer to the genwqe device descriptor + * Return: 0: Altera Stratix-IV 230 + * 1: Altera Stratix-IV 530 + * 2: Altera Stratix-V A4 + * 3: Altera Stratix-V A7 + */ +u8 genwqe_card_type(struct genwqe_dev *cd) +{ + u64 card_type = cd->slu_unitcfg; + + return (u8)((card_type & IO_SLU_UNITCFG_TYPE_MASK) >> 20); +} + +/** + * genwqe_card_reset() - Reset the card + * @cd: pointer to the genwqe device descriptor + */ +int genwqe_card_reset(struct genwqe_dev *cd) +{ + u64 softrst; + struct pci_dev *pci_dev = cd->pci_dev; + + if (!genwqe_is_privileged(cd)) + return -ENODEV; + + /* new SL */ + __genwqe_writeq(cd, IO_SLC_CFGREG_SOFTRESET, 0x1ull); + msleep(1000); + __genwqe_readq(cd, IO_HSU_FIR_CLR); + __genwqe_readq(cd, IO_APP_FIR_CLR); + __genwqe_readq(cd, IO_SLU_FIR_CLR); + + /* + * Read-modify-write to preserve the stealth bits + * + * For SL >= 039, Stealth WE bit allows removing + * the read-modify-wrote. + * r-m-w may require a mask 0x3C to avoid hitting hard + * reset again for error reset (should be 0, chicken). + */ + softrst = __genwqe_readq(cd, IO_SLC_CFGREG_SOFTRESET) & 0x3cull; + __genwqe_writeq(cd, IO_SLC_CFGREG_SOFTRESET, softrst | 0x2ull); + + /* give ERRORRESET some time to finish */ + msleep(50); + + if (genwqe_need_err_masking(cd)) { + dev_info(&pci_dev->dev, + "[%s] masking errors for old bitstreams\n", __func__); + __genwqe_writeq(cd, IO_SLC_MISC_DEBUG, 0x0aull); + } + return 0; +} + +int genwqe_read_softreset(struct genwqe_dev *cd) +{ + u64 bitstream; + + if (!genwqe_is_privileged(cd)) + return -ENODEV; + + bitstream = __genwqe_readq(cd, IO_SLU_BITSTREAM) & 0x1; + cd->softreset = (bitstream == 0) ? 0x8ull : 0xcull; + return 0; +} + +/** + * genwqe_set_interrupt_capability() - Configure MSI capability structure + * @cd: pointer to the device + * @count: number of vectors to allocate + * Return: 0 if no error + */ +int genwqe_set_interrupt_capability(struct genwqe_dev *cd, int count) +{ + int rc; + + rc = pci_alloc_irq_vectors(cd->pci_dev, 1, count, PCI_IRQ_MSI); + if (rc < 0) + return rc; + return 0; +} + +/** + * genwqe_reset_interrupt_capability() - Undo genwqe_set_interrupt_capability() + * @cd: pointer to the device + */ +void genwqe_reset_interrupt_capability(struct genwqe_dev *cd) +{ + pci_free_irq_vectors(cd->pci_dev); +} + +/** + * set_reg_idx() - Fill array with data. Ignore illegal offsets. + * @cd: card device + * @r: debug register array + * @i: index to desired entry + * @m: maximum possible entries + * @addr: addr which is read + * @idx: index in debug array + * @val: read value + */ +static int set_reg_idx(struct genwqe_dev *cd, struct genwqe_reg *r, + unsigned int *i, unsigned int m, u32 addr, u32 idx, + u64 val) +{ + if (WARN_ON_ONCE(*i >= m)) + return -EFAULT; + + r[*i].addr = addr; + r[*i].idx = idx; + r[*i].val = val; + ++*i; + return 0; +} + +static int set_reg(struct genwqe_dev *cd, struct genwqe_reg *r, + unsigned int *i, unsigned int m, u32 addr, u64 val) +{ + return set_reg_idx(cd, r, i, m, addr, 0, val); +} + +int genwqe_read_ffdc_regs(struct genwqe_dev *cd, struct genwqe_reg *regs, + unsigned int max_regs, int all) +{ + unsigned int i, j, idx = 0; + u32 ufir_addr, ufec_addr, sfir_addr, sfec_addr; + u64 gfir, sluid, appid, ufir, ufec, sfir, sfec; + + /* Global FIR */ + gfir = __genwqe_readq(cd, IO_SLC_CFGREG_GFIR); + set_reg(cd, regs, &idx, max_regs, IO_SLC_CFGREG_GFIR, gfir); + + /* UnitCfg for SLU */ + sluid = __genwqe_readq(cd, IO_SLU_UNITCFG); /* 0x00000000 */ + set_reg(cd, regs, &idx, max_regs, IO_SLU_UNITCFG, sluid); + + /* UnitCfg for APP */ + appid = __genwqe_readq(cd, IO_APP_UNITCFG); /* 0x02000000 */ + set_reg(cd, regs, &idx, max_regs, IO_APP_UNITCFG, appid); + + /* Check all chip Units */ + for (i = 0; i < GENWQE_MAX_UNITS; i++) { + + /* Unit FIR */ + ufir_addr = (i << 24) | 0x008; + ufir = __genwqe_readq(cd, ufir_addr); + set_reg(cd, regs, &idx, max_regs, ufir_addr, ufir); + + /* Unit FEC */ + ufec_addr = (i << 24) | 0x018; + ufec = __genwqe_readq(cd, ufec_addr); + set_reg(cd, regs, &idx, max_regs, ufec_addr, ufec); + + for (j = 0; j < 64; j++) { + /* wherever there is a primary 1, read the 2ndary */ + if (!all && (!(ufir & (1ull << j)))) + continue; + + sfir_addr = (i << 24) | (0x100 + 8 * j); + sfir = __genwqe_readq(cd, sfir_addr); + set_reg(cd, regs, &idx, max_regs, sfir_addr, sfir); + + sfec_addr = (i << 24) | (0x300 + 8 * j); + sfec = __genwqe_readq(cd, sfec_addr); + set_reg(cd, regs, &idx, max_regs, sfec_addr, sfec); + } + } + + /* fill with invalid data until end */ + for (i = idx; i < max_regs; i++) { + regs[i].addr = 0xffffffff; + regs[i].val = 0xffffffffffffffffull; + } + return idx; +} + +/** + * genwqe_ffdc_buff_size() - Calculates the number of dump registers + * @cd: genwqe device descriptor + * @uid: unit ID + */ +int genwqe_ffdc_buff_size(struct genwqe_dev *cd, int uid) +{ + int entries = 0, ring, traps, traces, trace_entries; + u32 eevptr_addr, l_addr, d_len, d_type; + u64 eevptr, val, addr; + + eevptr_addr = GENWQE_UID_OFFS(uid) | IO_EXTENDED_ERROR_POINTER; + eevptr = __genwqe_readq(cd, eevptr_addr); + + if ((eevptr != 0x0) && (eevptr != -1ull)) { + l_addr = GENWQE_UID_OFFS(uid) | eevptr; + + while (1) { + val = __genwqe_readq(cd, l_addr); + + if ((val == 0x0) || (val == -1ull)) + break; + + /* 38:24 */ + d_len = (val & 0x0000007fff000000ull) >> 24; + + /* 39 */ + d_type = (val & 0x0000008000000000ull) >> 36; + + if (d_type) { /* repeat */ + entries += d_len; + } else { /* size in bytes! */ + entries += d_len >> 3; + } + + l_addr += 8; + } + } + + for (ring = 0; ring < 8; ring++) { + addr = GENWQE_UID_OFFS(uid) | IO_EXTENDED_DIAG_MAP(ring); + val = __genwqe_readq(cd, addr); + + if ((val == 0x0ull) || (val == -1ull)) + continue; + + traps = (val >> 24) & 0xff; + traces = (val >> 16) & 0xff; + trace_entries = val & 0xffff; + + entries += traps + (traces * trace_entries); + } + return entries; +} + +/** + * genwqe_ffdc_buff_read() - Implements LogoutExtendedErrorRegisters procedure + * @cd: genwqe device descriptor + * @uid: unit ID + * @regs: register information + * @max_regs: number of register entries + */ +int genwqe_ffdc_buff_read(struct genwqe_dev *cd, int uid, + struct genwqe_reg *regs, unsigned int max_regs) +{ + int i, traps, traces, trace, trace_entries, trace_entry, ring; + unsigned int idx = 0; + u32 eevptr_addr, l_addr, d_addr, d_len, d_type; + u64 eevptr, e, val, addr; + + eevptr_addr = GENWQE_UID_OFFS(uid) | IO_EXTENDED_ERROR_POINTER; + eevptr = __genwqe_readq(cd, eevptr_addr); + + if ((eevptr != 0x0) && (eevptr != 0xffffffffffffffffull)) { + l_addr = GENWQE_UID_OFFS(uid) | eevptr; + while (1) { + e = __genwqe_readq(cd, l_addr); + if ((e == 0x0) || (e == 0xffffffffffffffffull)) + break; + + d_addr = (e & 0x0000000000ffffffull); /* 23:0 */ + d_len = (e & 0x0000007fff000000ull) >> 24; /* 38:24 */ + d_type = (e & 0x0000008000000000ull) >> 36; /* 39 */ + d_addr |= GENWQE_UID_OFFS(uid); + + if (d_type) { + for (i = 0; i < (int)d_len; i++) { + val = __genwqe_readq(cd, d_addr); + set_reg_idx(cd, regs, &idx, max_regs, + d_addr, i, val); + } + } else { + d_len >>= 3; /* Size in bytes! */ + for (i = 0; i < (int)d_len; i++, d_addr += 8) { + val = __genwqe_readq(cd, d_addr); + set_reg_idx(cd, regs, &idx, max_regs, + d_addr, 0, val); + } + } + l_addr += 8; + } + } + + /* + * To save time, there are only 6 traces poplulated on Uid=2, + * Ring=1. each with iters=512. + */ + for (ring = 0; ring < 8; ring++) { /* 0 is fls, 1 is fds, + 2...7 are ASI rings */ + addr = GENWQE_UID_OFFS(uid) | IO_EXTENDED_DIAG_MAP(ring); + val = __genwqe_readq(cd, addr); + + if ((val == 0x0ull) || (val == -1ull)) + continue; + + traps = (val >> 24) & 0xff; /* Number of Traps */ + traces = (val >> 16) & 0xff; /* Number of Traces */ + trace_entries = val & 0xffff; /* Entries per trace */ + + /* Note: This is a combined loop that dumps both the traps */ + /* (for the trace == 0 case) as well as the traces 1 to */ + /* 'traces'. */ + for (trace = 0; trace <= traces; trace++) { + u32 diag_sel = + GENWQE_EXTENDED_DIAG_SELECTOR(ring, trace); + + addr = (GENWQE_UID_OFFS(uid) | + IO_EXTENDED_DIAG_SELECTOR); + __genwqe_writeq(cd, addr, diag_sel); + + for (trace_entry = 0; + trace_entry < (trace ? trace_entries : traps); + trace_entry++) { + addr = (GENWQE_UID_OFFS(uid) | + IO_EXTENDED_DIAG_READ_MBX); + val = __genwqe_readq(cd, addr); + set_reg_idx(cd, regs, &idx, max_regs, addr, + (diag_sel<<16) | trace_entry, val); + } + } + } + return 0; +} + +/** + * genwqe_write_vreg() - Write register in virtual window + * @cd: genwqe device descriptor + * @reg: register (byte) offset within BAR + * @val: value to write + * @func: PCI virtual function + * + * Note, these registers are only accessible to the PF through the + * VF-window. It is not intended for the VF to access. + */ +int genwqe_write_vreg(struct genwqe_dev *cd, u32 reg, u64 val, int func) +{ + __genwqe_writeq(cd, IO_PF_SLC_VIRTUAL_WINDOW, func & 0xf); + __genwqe_writeq(cd, reg, val); + return 0; +} + +/** + * genwqe_read_vreg() - Read register in virtual window + * @cd: genwqe device descriptor + * @reg: register (byte) offset within BAR + * @func: PCI virtual function + * + * Note, these registers are only accessible to the PF through the + * VF-window. It is not intended for the VF to access. + */ +u64 genwqe_read_vreg(struct genwqe_dev *cd, u32 reg, int func) +{ + __genwqe_writeq(cd, IO_PF_SLC_VIRTUAL_WINDOW, func & 0xf); + return __genwqe_readq(cd, reg); +} + +/** + * genwqe_base_clock_frequency() - Deteremine base clock frequency of the card + * @cd: genwqe device descriptor + * + * Note: From a design perspective it turned out to be a bad idea to + * use codes here to specifiy the frequency/speed values. An old + * driver cannot understand new codes and is therefore always a + * problem. Better is to measure out the value or put the + * speed/frequency directly into a register which is always a valid + * value for old as well as for new software. + * + * Return: Card clock in MHz + */ +int genwqe_base_clock_frequency(struct genwqe_dev *cd) +{ + u16 speed; /* MHz MHz MHz MHz */ + static const int speed_grade[] = { 250, 200, 166, 175 }; + + speed = (u16)((cd->slu_unitcfg >> 28) & 0x0full); + if (speed >= ARRAY_SIZE(speed_grade)) + return 0; /* illegal value */ + + return speed_grade[speed]; +} + +/** + * genwqe_stop_traps() - Stop traps + * @cd: genwqe device descriptor + * + * Before reading out the analysis data, we need to stop the traps. + */ +void genwqe_stop_traps(struct genwqe_dev *cd) +{ + __genwqe_writeq(cd, IO_SLC_MISC_DEBUG_SET, 0xcull); +} + +/** + * genwqe_start_traps() - Start traps + * @cd: genwqe device descriptor + * + * After having read the data, we can/must enable the traps again. + */ +void genwqe_start_traps(struct genwqe_dev *cd) +{ + __genwqe_writeq(cd, IO_SLC_MISC_DEBUG_CLR, 0xcull); + + if (genwqe_need_err_masking(cd)) + __genwqe_writeq(cd, IO_SLC_MISC_DEBUG, 0x0aull); +} diff --git a/drivers/misc/genwqe/genwqe_driver.h b/drivers/misc/genwqe/genwqe_driver.h new file mode 100644 index 000000000..8c333481b --- /dev/null +++ b/drivers/misc/genwqe/genwqe_driver.h @@ -0,0 +1,69 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef __GENWQE_DRIVER_H__ +#define __GENWQE_DRIVER_H__ + +/** + * IBM Accelerator Family 'GenWQE' + * + * (C) Copyright IBM Corp. 2013 + * + * Author: Frank Haverkamp <haver@linux.vnet.ibm.com> + * Author: Joerg-Stephan Vogt <jsvogt@de.ibm.com> + * Author: Michael Jung <mijung@gmx.net> + * Author: Michael Ruettger <michael@ibmra.de> + */ + +#include <linux/types.h> +#include <linux/stddef.h> +#include <linux/cdev.h> +#include <linux/list.h> +#include <linux/kthread.h> +#include <linux/scatterlist.h> +#include <linux/iommu.h> +#include <linux/spinlock.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> +#include <linux/printk.h> + +#include <asm/byteorder.h> +#include <linux/genwqe/genwqe_card.h> + +#define DRV_VERSION "2.0.25" + +/* + * Static minor number assignement, until we decide/implement + * something dynamic. + */ +#define GENWQE_MAX_MINOR 128 /* up to 128 possible genwqe devices */ + +/** + * genwqe_requ_alloc() - Allocate a new DDCB execution request + * + * This data structure contains the user visiable fields of the DDCB + * to be executed. + * + * Return: ptr to genwqe_ddcb_cmd data structure + */ +struct genwqe_ddcb_cmd *ddcb_requ_alloc(void); + +/** + * ddcb_requ_free() - Free DDCB execution request. + * @req: ptr to genwqe_ddcb_cmd data structure. + */ +void ddcb_requ_free(struct genwqe_ddcb_cmd *req); + +u32 genwqe_crc32(u8 *buff, size_t len, u32 init); + +static inline void genwqe_hexdump(struct pci_dev *pci_dev, + const void *buff, unsigned int size) +{ + char prefix[32]; + + scnprintf(prefix, sizeof(prefix), "%s %s: ", + GENWQE_DEVNAME, pci_name(pci_dev)); + + print_hex_dump_debug(prefix, DUMP_PREFIX_OFFSET, 16, 1, buff, + size, true); +} + +#endif /* __GENWQE_DRIVER_H__ */ |