diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/misc/mei/pci-txe.c | 406 |
1 files changed, 406 insertions, 0 deletions
diff --git a/drivers/misc/mei/pci-txe.c b/drivers/misc/mei/pci-txe.c new file mode 100644 index 000000000..fa20d9a27 --- /dev/null +++ b/drivers/misc/mei/pci-txe.c @@ -0,0 +1,406 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2013-2020, Intel Corporation. All rights reserved. + * Intel Management Engine Interface (Intel MEI) Linux driver + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/workqueue.h> +#include <linux/pm_domain.h> +#include <linux/pm_runtime.h> + +#include <linux/mei.h> + + +#include "mei_dev.h" +#include "hw-txe.h" + +static const struct pci_device_id mei_txe_pci_tbl[] = { + {PCI_VDEVICE(INTEL, 0x0F18)}, /* Baytrail */ + {PCI_VDEVICE(INTEL, 0x2298)}, /* Cherrytrail */ + + {0, } +}; +MODULE_DEVICE_TABLE(pci, mei_txe_pci_tbl); + +#ifdef CONFIG_PM +static inline void mei_txe_set_pm_domain(struct mei_device *dev); +static inline void mei_txe_unset_pm_domain(struct mei_device *dev); +#else +static inline void mei_txe_set_pm_domain(struct mei_device *dev) {} +static inline void mei_txe_unset_pm_domain(struct mei_device *dev) {} +#endif /* CONFIG_PM */ + +/** + * mei_txe_probe - Device Initialization Routine + * + * @pdev: PCI device structure + * @ent: entry in mei_txe_pci_tbl + * + * Return: 0 on success, <0 on failure. + */ +static int mei_txe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct mei_device *dev; + struct mei_txe_hw *hw; + const int mask = BIT(SEC_BAR) | BIT(BRIDGE_BAR); + int err; + + /* enable pci dev */ + err = pcim_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "failed to enable pci device.\n"); + goto end; + } + /* set PCI host mastering */ + pci_set_master(pdev); + /* pci request regions and mapping IO device memory for mei driver */ + err = pcim_iomap_regions(pdev, mask, KBUILD_MODNAME); + if (err) { + dev_err(&pdev->dev, "failed to get pci regions.\n"); + goto end; + } + + err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(36)); + if (err) { + err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (err) { + dev_err(&pdev->dev, "No suitable DMA available.\n"); + goto end; + } + } + + /* allocates and initializes the mei dev structure */ + dev = mei_txe_dev_init(pdev); + if (!dev) { + err = -ENOMEM; + goto end; + } + hw = to_txe_hw(dev); + hw->mem_addr = pcim_iomap_table(pdev); + + pci_enable_msi(pdev); + + /* clear spurious interrupts */ + mei_clear_interrupts(dev); + + /* request and enable interrupt */ + if (pci_dev_msi_enabled(pdev)) + err = request_threaded_irq(pdev->irq, + NULL, + mei_txe_irq_thread_handler, + IRQF_ONESHOT, KBUILD_MODNAME, dev); + else + err = request_threaded_irq(pdev->irq, + mei_txe_irq_quick_handler, + mei_txe_irq_thread_handler, + IRQF_SHARED, KBUILD_MODNAME, dev); + if (err) { + dev_err(&pdev->dev, "mei: request_threaded_irq failure. irq = %d\n", + pdev->irq); + goto end; + } + + if (mei_start(dev)) { + dev_err(&pdev->dev, "init hw failure.\n"); + err = -ENODEV; + goto release_irq; + } + + pm_runtime_set_autosuspend_delay(&pdev->dev, MEI_TXI_RPM_TIMEOUT); + pm_runtime_use_autosuspend(&pdev->dev); + + err = mei_register(dev, &pdev->dev); + if (err) + goto stop; + + pci_set_drvdata(pdev, dev); + + /* + * MEI requires to resume from runtime suspend mode + * in order to perform link reset flow upon system suspend. + */ + dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NO_DIRECT_COMPLETE); + + /* + * TXE maps runtime suspend/resume to own power gating states, + * hence we need to go around native PCI runtime service which + * eventually brings the device into D3cold/hot state. + * But the TXE device cannot wake up from D3 unlike from own + * power gating. To get around PCI device native runtime pm, + * TXE uses runtime pm domain handlers which take precedence. + */ + mei_txe_set_pm_domain(dev); + + pm_runtime_put_noidle(&pdev->dev); + + return 0; + +stop: + mei_stop(dev); +release_irq: + mei_cancel_work(dev); + mei_disable_interrupts(dev); + free_irq(pdev->irq, dev); +end: + dev_err(&pdev->dev, "initialization failed.\n"); + return err; +} + +/** + * mei_txe_shutdown- Device Shutdown Routine + * + * @pdev: PCI device structure + * + * mei_txe_shutdown is called from the reboot notifier + * it's a simplified version of remove so we go down + * faster. + */ +static void mei_txe_shutdown(struct pci_dev *pdev) +{ + struct mei_device *dev; + + dev = pci_get_drvdata(pdev); + if (!dev) + return; + + dev_dbg(&pdev->dev, "shutdown\n"); + mei_stop(dev); + + mei_txe_unset_pm_domain(dev); + + mei_disable_interrupts(dev); + free_irq(pdev->irq, dev); +} + +/** + * mei_txe_remove - Device Removal Routine + * + * @pdev: PCI device structure + * + * mei_remove is called by the PCI subsystem to alert the driver + * that it should release a PCI device. + */ +static void mei_txe_remove(struct pci_dev *pdev) +{ + struct mei_device *dev; + + dev = pci_get_drvdata(pdev); + if (!dev) { + dev_err(&pdev->dev, "mei: dev == NULL\n"); + return; + } + + pm_runtime_get_noresume(&pdev->dev); + + mei_stop(dev); + + mei_txe_unset_pm_domain(dev); + + mei_disable_interrupts(dev); + free_irq(pdev->irq, dev); + + mei_deregister(dev); +} + + +#ifdef CONFIG_PM_SLEEP +static int mei_txe_pci_suspend(struct device *device) +{ + struct pci_dev *pdev = to_pci_dev(device); + struct mei_device *dev = pci_get_drvdata(pdev); + + if (!dev) + return -ENODEV; + + dev_dbg(&pdev->dev, "suspend\n"); + + mei_stop(dev); + + mei_disable_interrupts(dev); + + free_irq(pdev->irq, dev); + pci_disable_msi(pdev); + + return 0; +} + +static int mei_txe_pci_resume(struct device *device) +{ + struct pci_dev *pdev = to_pci_dev(device); + struct mei_device *dev; + int err; + + dev = pci_get_drvdata(pdev); + if (!dev) + return -ENODEV; + + pci_enable_msi(pdev); + + mei_clear_interrupts(dev); + + /* request and enable interrupt */ + if (pci_dev_msi_enabled(pdev)) + err = request_threaded_irq(pdev->irq, + NULL, + mei_txe_irq_thread_handler, + IRQF_ONESHOT, KBUILD_MODNAME, dev); + else + err = request_threaded_irq(pdev->irq, + mei_txe_irq_quick_handler, + mei_txe_irq_thread_handler, + IRQF_SHARED, KBUILD_MODNAME, dev); + if (err) { + dev_err(&pdev->dev, "request_threaded_irq failed: irq = %d.\n", + pdev->irq); + return err; + } + + err = mei_restart(dev); + + return err; +} +#endif /* CONFIG_PM_SLEEP */ + +#ifdef CONFIG_PM +static int mei_txe_pm_runtime_idle(struct device *device) +{ + struct mei_device *dev; + + dev_dbg(device, "rpm: txe: runtime_idle\n"); + + dev = dev_get_drvdata(device); + if (!dev) + return -ENODEV; + if (mei_write_is_idle(dev)) + pm_runtime_autosuspend(device); + + return -EBUSY; +} +static int mei_txe_pm_runtime_suspend(struct device *device) +{ + struct mei_device *dev; + int ret; + + dev_dbg(device, "rpm: txe: runtime suspend\n"); + + dev = dev_get_drvdata(device); + if (!dev) + return -ENODEV; + + mutex_lock(&dev->device_lock); + + if (mei_write_is_idle(dev)) + ret = mei_txe_aliveness_set_sync(dev, 0); + else + ret = -EAGAIN; + + /* keep irq on we are staying in D0 */ + + dev_dbg(device, "rpm: txe: runtime suspend ret=%d\n", ret); + + mutex_unlock(&dev->device_lock); + + if (ret && ret != -EAGAIN) + schedule_work(&dev->reset_work); + + return ret; +} + +static int mei_txe_pm_runtime_resume(struct device *device) +{ + struct mei_device *dev; + int ret; + + dev_dbg(device, "rpm: txe: runtime resume\n"); + + dev = dev_get_drvdata(device); + if (!dev) + return -ENODEV; + + mutex_lock(&dev->device_lock); + + mei_enable_interrupts(dev); + + ret = mei_txe_aliveness_set_sync(dev, 1); + + mutex_unlock(&dev->device_lock); + + dev_dbg(device, "rpm: txe: runtime resume ret = %d\n", ret); + + if (ret) + schedule_work(&dev->reset_work); + + return ret; +} + +/** + * mei_txe_set_pm_domain - fill and set pm domain structure for device + * + * @dev: mei_device + */ +static inline void mei_txe_set_pm_domain(struct mei_device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev->dev); + + if (pdev->dev.bus && pdev->dev.bus->pm) { + dev->pg_domain.ops = *pdev->dev.bus->pm; + + dev->pg_domain.ops.runtime_suspend = mei_txe_pm_runtime_suspend; + dev->pg_domain.ops.runtime_resume = mei_txe_pm_runtime_resume; + dev->pg_domain.ops.runtime_idle = mei_txe_pm_runtime_idle; + + dev_pm_domain_set(&pdev->dev, &dev->pg_domain); + } +} + +/** + * mei_txe_unset_pm_domain - clean pm domain structure for device + * + * @dev: mei_device + */ +static inline void mei_txe_unset_pm_domain(struct mei_device *dev) +{ + /* stop using pm callbacks if any */ + dev_pm_domain_set(dev->dev, NULL); +} + +static const struct dev_pm_ops mei_txe_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(mei_txe_pci_suspend, + mei_txe_pci_resume) + SET_RUNTIME_PM_OPS( + mei_txe_pm_runtime_suspend, + mei_txe_pm_runtime_resume, + mei_txe_pm_runtime_idle) +}; + +#define MEI_TXE_PM_OPS (&mei_txe_pm_ops) +#else +#define MEI_TXE_PM_OPS NULL +#endif /* CONFIG_PM */ + +/* + * PCI driver structure + */ +static struct pci_driver mei_txe_driver = { + .name = KBUILD_MODNAME, + .id_table = mei_txe_pci_tbl, + .probe = mei_txe_probe, + .remove = mei_txe_remove, + .shutdown = mei_txe_shutdown, + .driver.pm = MEI_TXE_PM_OPS, +}; + +module_pci_driver(mei_txe_driver); + +MODULE_AUTHOR("Intel Corporation"); +MODULE_DESCRIPTION("Intel(R) Trusted Execution Environment Interface"); +MODULE_LICENSE("GPL v2"); |