diff options
Diffstat (limited to 'drivers/net/dsa/realtek/realtek-smi.c')
-rw-r--r-- | drivers/net/dsa/realtek/realtek-smi.c | 570 |
1 files changed, 570 insertions, 0 deletions
diff --git a/drivers/net/dsa/realtek/realtek-smi.c b/drivers/net/dsa/realtek/realtek-smi.c new file mode 100644 index 000000000..1b447d96b --- /dev/null +++ b/drivers/net/dsa/realtek/realtek-smi.c @@ -0,0 +1,570 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Realtek Simple Management Interface (SMI) driver + * It can be discussed how "simple" this interface is. + * + * The SMI protocol piggy-backs the MDIO MDC and MDIO signals levels + * but the protocol is not MDIO at all. Instead it is a Realtek + * pecularity that need to bit-bang the lines in a special way to + * communicate with the switch. + * + * ASICs we intend to support with this driver: + * + * RTL8366 - The original version, apparently + * RTL8369 - Similar enough to have the same datsheet as RTL8366 + * RTL8366RB - Probably reads out "RTL8366 revision B", has a quite + * different register layout from the other two + * RTL8366S - Is this "RTL8366 super"? + * RTL8367 - Has an OpenWRT driver as well + * RTL8368S - Seems to be an alternative name for RTL8366RB + * RTL8370 - Also uses SMI + * + * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> + * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com> + * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv> + * Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com> + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/spinlock.h> +#include <linux/skbuff.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_mdio.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/bitops.h> +#include <linux/if_bridge.h> + +#include "realtek.h" + +#define REALTEK_SMI_ACK_RETRY_COUNT 5 + +static inline void realtek_smi_clk_delay(struct realtek_priv *priv) +{ + ndelay(priv->clk_delay); +} + +static void realtek_smi_start(struct realtek_priv *priv) +{ + /* Set GPIO pins to output mode, with initial state: + * SCK = 0, SDA = 1 + */ + gpiod_direction_output(priv->mdc, 0); + gpiod_direction_output(priv->mdio, 1); + realtek_smi_clk_delay(priv); + + /* CLK 1: 0 -> 1, 1 -> 0 */ + gpiod_set_value(priv->mdc, 1); + realtek_smi_clk_delay(priv); + gpiod_set_value(priv->mdc, 0); + realtek_smi_clk_delay(priv); + + /* CLK 2: */ + gpiod_set_value(priv->mdc, 1); + realtek_smi_clk_delay(priv); + gpiod_set_value(priv->mdio, 0); + realtek_smi_clk_delay(priv); + gpiod_set_value(priv->mdc, 0); + realtek_smi_clk_delay(priv); + gpiod_set_value(priv->mdio, 1); +} + +static void realtek_smi_stop(struct realtek_priv *priv) +{ + realtek_smi_clk_delay(priv); + gpiod_set_value(priv->mdio, 0); + gpiod_set_value(priv->mdc, 1); + realtek_smi_clk_delay(priv); + gpiod_set_value(priv->mdio, 1); + realtek_smi_clk_delay(priv); + gpiod_set_value(priv->mdc, 1); + realtek_smi_clk_delay(priv); + gpiod_set_value(priv->mdc, 0); + realtek_smi_clk_delay(priv); + gpiod_set_value(priv->mdc, 1); + + /* Add a click */ + realtek_smi_clk_delay(priv); + gpiod_set_value(priv->mdc, 0); + realtek_smi_clk_delay(priv); + gpiod_set_value(priv->mdc, 1); + + /* Set GPIO pins to input mode */ + gpiod_direction_input(priv->mdio); + gpiod_direction_input(priv->mdc); +} + +static void realtek_smi_write_bits(struct realtek_priv *priv, u32 data, u32 len) +{ + for (; len > 0; len--) { + realtek_smi_clk_delay(priv); + + /* Prepare data */ + gpiod_set_value(priv->mdio, !!(data & (1 << (len - 1)))); + realtek_smi_clk_delay(priv); + + /* Clocking */ + gpiod_set_value(priv->mdc, 1); + realtek_smi_clk_delay(priv); + gpiod_set_value(priv->mdc, 0); + } +} + +static void realtek_smi_read_bits(struct realtek_priv *priv, u32 len, u32 *data) +{ + gpiod_direction_input(priv->mdio); + + for (*data = 0; len > 0; len--) { + u32 u; + + realtek_smi_clk_delay(priv); + + /* Clocking */ + gpiod_set_value(priv->mdc, 1); + realtek_smi_clk_delay(priv); + u = !!gpiod_get_value(priv->mdio); + gpiod_set_value(priv->mdc, 0); + + *data |= (u << (len - 1)); + } + + gpiod_direction_output(priv->mdio, 0); +} + +static int realtek_smi_wait_for_ack(struct realtek_priv *priv) +{ + int retry_cnt; + + retry_cnt = 0; + do { + u32 ack; + + realtek_smi_read_bits(priv, 1, &ack); + if (ack == 0) + break; + + if (++retry_cnt > REALTEK_SMI_ACK_RETRY_COUNT) { + dev_err(priv->dev, "ACK timeout\n"); + return -ETIMEDOUT; + } + } while (1); + + return 0; +} + +static int realtek_smi_write_byte(struct realtek_priv *priv, u8 data) +{ + realtek_smi_write_bits(priv, data, 8); + return realtek_smi_wait_for_ack(priv); +} + +static int realtek_smi_write_byte_noack(struct realtek_priv *priv, u8 data) +{ + realtek_smi_write_bits(priv, data, 8); + return 0; +} + +static int realtek_smi_read_byte0(struct realtek_priv *priv, u8 *data) +{ + u32 t; + + /* Read data */ + realtek_smi_read_bits(priv, 8, &t); + *data = (t & 0xff); + + /* Send an ACK */ + realtek_smi_write_bits(priv, 0x00, 1); + + return 0; +} + +static int realtek_smi_read_byte1(struct realtek_priv *priv, u8 *data) +{ + u32 t; + + /* Read data */ + realtek_smi_read_bits(priv, 8, &t); + *data = (t & 0xff); + + /* Send an ACK */ + realtek_smi_write_bits(priv, 0x01, 1); + + return 0; +} + +static int realtek_smi_read_reg(struct realtek_priv *priv, u32 addr, u32 *data) +{ + unsigned long flags; + u8 lo = 0; + u8 hi = 0; + int ret; + + spin_lock_irqsave(&priv->lock, flags); + + realtek_smi_start(priv); + + /* Send READ command */ + ret = realtek_smi_write_byte(priv, priv->cmd_read); + if (ret) + goto out; + + /* Set ADDR[7:0] */ + ret = realtek_smi_write_byte(priv, addr & 0xff); + if (ret) + goto out; + + /* Set ADDR[15:8] */ + ret = realtek_smi_write_byte(priv, addr >> 8); + if (ret) + goto out; + + /* Read DATA[7:0] */ + realtek_smi_read_byte0(priv, &lo); + /* Read DATA[15:8] */ + realtek_smi_read_byte1(priv, &hi); + + *data = ((u32)lo) | (((u32)hi) << 8); + + ret = 0; + + out: + realtek_smi_stop(priv); + spin_unlock_irqrestore(&priv->lock, flags); + + return ret; +} + +static int realtek_smi_write_reg(struct realtek_priv *priv, + u32 addr, u32 data, bool ack) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&priv->lock, flags); + + realtek_smi_start(priv); + + /* Send WRITE command */ + ret = realtek_smi_write_byte(priv, priv->cmd_write); + if (ret) + goto out; + + /* Set ADDR[7:0] */ + ret = realtek_smi_write_byte(priv, addr & 0xff); + if (ret) + goto out; + + /* Set ADDR[15:8] */ + ret = realtek_smi_write_byte(priv, addr >> 8); + if (ret) + goto out; + + /* Write DATA[7:0] */ + ret = realtek_smi_write_byte(priv, data & 0xff); + if (ret) + goto out; + + /* Write DATA[15:8] */ + if (ack) + ret = realtek_smi_write_byte(priv, data >> 8); + else + ret = realtek_smi_write_byte_noack(priv, data >> 8); + if (ret) + goto out; + + ret = 0; + + out: + realtek_smi_stop(priv); + spin_unlock_irqrestore(&priv->lock, flags); + + return ret; +} + +/* There is one single case when we need to use this accessor and that + * is when issueing soft reset. Since the device reset as soon as we write + * that bit, no ACK will come back for natural reasons. + */ +static int realtek_smi_write_reg_noack(void *ctx, u32 reg, u32 val) +{ + return realtek_smi_write_reg(ctx, reg, val, false); +} + +/* Regmap accessors */ + +static int realtek_smi_write(void *ctx, u32 reg, u32 val) +{ + struct realtek_priv *priv = ctx; + + return realtek_smi_write_reg(priv, reg, val, true); +} + +static int realtek_smi_read(void *ctx, u32 reg, u32 *val) +{ + struct realtek_priv *priv = ctx; + + return realtek_smi_read_reg(priv, reg, val); +} + +static void realtek_smi_lock(void *ctx) +{ + struct realtek_priv *priv = ctx; + + mutex_lock(&priv->map_lock); +} + +static void realtek_smi_unlock(void *ctx) +{ + struct realtek_priv *priv = ctx; + + mutex_unlock(&priv->map_lock); +} + +static const struct regmap_config realtek_smi_regmap_config = { + .reg_bits = 10, /* A4..A0 R4..R0 */ + .val_bits = 16, + .reg_stride = 1, + /* PHY regs are at 0x8000 */ + .max_register = 0xffff, + .reg_format_endian = REGMAP_ENDIAN_BIG, + .reg_read = realtek_smi_read, + .reg_write = realtek_smi_write, + .cache_type = REGCACHE_NONE, + .lock = realtek_smi_lock, + .unlock = realtek_smi_unlock, +}; + +static const struct regmap_config realtek_smi_nolock_regmap_config = { + .reg_bits = 10, /* A4..A0 R4..R0 */ + .val_bits = 16, + .reg_stride = 1, + /* PHY regs are at 0x8000 */ + .max_register = 0xffff, + .reg_format_endian = REGMAP_ENDIAN_BIG, + .reg_read = realtek_smi_read, + .reg_write = realtek_smi_write, + .cache_type = REGCACHE_NONE, + .disable_locking = true, +}; + +static int realtek_smi_mdio_read(struct mii_bus *bus, int addr, int regnum) +{ + struct realtek_priv *priv = bus->priv; + + return priv->ops->phy_read(priv, addr, regnum); +} + +static int realtek_smi_mdio_write(struct mii_bus *bus, int addr, int regnum, + u16 val) +{ + struct realtek_priv *priv = bus->priv; + + return priv->ops->phy_write(priv, addr, regnum, val); +} + +static int realtek_smi_setup_mdio(struct dsa_switch *ds) +{ + struct realtek_priv *priv = ds->priv; + struct device_node *mdio_np; + int ret; + + mdio_np = of_get_compatible_child(priv->dev->of_node, "realtek,smi-mdio"); + if (!mdio_np) { + dev_err(priv->dev, "no MDIO bus node\n"); + return -ENODEV; + } + + priv->slave_mii_bus = devm_mdiobus_alloc(priv->dev); + if (!priv->slave_mii_bus) { + ret = -ENOMEM; + goto err_put_node; + } + priv->slave_mii_bus->priv = priv; + priv->slave_mii_bus->name = "SMI slave MII"; + priv->slave_mii_bus->read = realtek_smi_mdio_read; + priv->slave_mii_bus->write = realtek_smi_mdio_write; + snprintf(priv->slave_mii_bus->id, MII_BUS_ID_SIZE, "SMI-%d", + ds->index); + priv->slave_mii_bus->dev.of_node = mdio_np; + priv->slave_mii_bus->parent = priv->dev; + ds->slave_mii_bus = priv->slave_mii_bus; + + ret = devm_of_mdiobus_register(priv->dev, priv->slave_mii_bus, mdio_np); + if (ret) { + dev_err(priv->dev, "unable to register MDIO bus %s\n", + priv->slave_mii_bus->id); + goto err_put_node; + } + + return 0; + +err_put_node: + of_node_put(mdio_np); + + return ret; +} + +static int realtek_smi_probe(struct platform_device *pdev) +{ + const struct realtek_variant *var; + struct device *dev = &pdev->dev; + struct realtek_priv *priv; + struct regmap_config rc; + struct device_node *np; + int ret; + + var = of_device_get_match_data(dev); + np = dev->of_node; + + priv = devm_kzalloc(dev, sizeof(*priv) + var->chip_data_sz, GFP_KERNEL); + if (!priv) + return -ENOMEM; + priv->chip_data = (void *)priv + sizeof(*priv); + + mutex_init(&priv->map_lock); + + rc = realtek_smi_regmap_config; + rc.lock_arg = priv; + priv->map = devm_regmap_init(dev, NULL, priv, &rc); + if (IS_ERR(priv->map)) { + ret = PTR_ERR(priv->map); + dev_err(dev, "regmap init failed: %d\n", ret); + return ret; + } + + rc = realtek_smi_nolock_regmap_config; + priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc); + if (IS_ERR(priv->map_nolock)) { + ret = PTR_ERR(priv->map_nolock); + dev_err(dev, "regmap init failed: %d\n", ret); + return ret; + } + + /* Link forward and backward */ + priv->dev = dev; + priv->clk_delay = var->clk_delay; + priv->cmd_read = var->cmd_read; + priv->cmd_write = var->cmd_write; + priv->ops = var->ops; + + priv->setup_interface = realtek_smi_setup_mdio; + priv->write_reg_noack = realtek_smi_write_reg_noack; + + dev_set_drvdata(dev, priv); + spin_lock_init(&priv->lock); + + /* TODO: if power is software controlled, set up any regulators here */ + + priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(priv->reset)) { + dev_err(dev, "failed to get RESET GPIO\n"); + return PTR_ERR(priv->reset); + } + if (priv->reset) { + gpiod_set_value(priv->reset, 1); + dev_dbg(dev, "asserted RESET\n"); + msleep(REALTEK_HW_STOP_DELAY); + gpiod_set_value(priv->reset, 0); + msleep(REALTEK_HW_START_DELAY); + dev_dbg(dev, "deasserted RESET\n"); + } + + /* Fetch MDIO pins */ + priv->mdc = devm_gpiod_get_optional(dev, "mdc", GPIOD_OUT_LOW); + if (IS_ERR(priv->mdc)) + return PTR_ERR(priv->mdc); + priv->mdio = devm_gpiod_get_optional(dev, "mdio", GPIOD_OUT_LOW); + if (IS_ERR(priv->mdio)) + return PTR_ERR(priv->mdio); + + priv->leds_disabled = of_property_read_bool(np, "realtek,disable-leds"); + + ret = priv->ops->detect(priv); + if (ret) { + dev_err(dev, "unable to detect switch\n"); + return ret; + } + + priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL); + if (!priv->ds) + return -ENOMEM; + + priv->ds->dev = dev; + priv->ds->num_ports = priv->num_ports; + priv->ds->priv = priv; + + priv->ds->ops = var->ds_ops_smi; + ret = dsa_register_switch(priv->ds); + if (ret) { + dev_err_probe(dev, ret, "unable to register switch\n"); + return ret; + } + return 0; +} + +static int realtek_smi_remove(struct platform_device *pdev) +{ + struct realtek_priv *priv = platform_get_drvdata(pdev); + + if (!priv) + return 0; + + dsa_unregister_switch(priv->ds); + if (priv->slave_mii_bus) + of_node_put(priv->slave_mii_bus->dev.of_node); + + /* leave the device reset asserted */ + if (priv->reset) + gpiod_set_value(priv->reset, 1); + + return 0; +} + +static void realtek_smi_shutdown(struct platform_device *pdev) +{ + struct realtek_priv *priv = platform_get_drvdata(pdev); + + if (!priv) + return; + + dsa_switch_shutdown(priv->ds); + + platform_set_drvdata(pdev, NULL); +} + +static const struct of_device_id realtek_smi_of_match[] = { +#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB) + { + .compatible = "realtek,rtl8366rb", + .data = &rtl8366rb_variant, + }, +#endif +#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8365MB) + { + .compatible = "realtek,rtl8365mb", + .data = &rtl8365mb_variant, + }, +#endif + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, realtek_smi_of_match); + +static struct platform_driver realtek_smi_driver = { + .driver = { + .name = "realtek-smi", + .of_match_table = of_match_ptr(realtek_smi_of_match), + }, + .probe = realtek_smi_probe, + .remove = realtek_smi_remove, + .shutdown = realtek_smi_shutdown, +}; +module_platform_driver(realtek_smi_driver); + +MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); +MODULE_DESCRIPTION("Driver for Realtek ethernet switch connected via SMI interface"); +MODULE_LICENSE("GPL"); |