summaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa/vitesse-vsc73xx-core.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa/vitesse-vsc73xx-core.c')
-rw-r--r--drivers/net/dsa/vitesse-vsc73xx-core.c1233
1 files changed, 1233 insertions, 0 deletions
diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c
new file mode 100644
index 000000000..3efd55669
--- /dev/null
+++ b/drivers/net/dsa/vitesse-vsc73xx-core.c
@@ -0,0 +1,1233 @@
+// SPDX-License-Identifier: GPL-2.0
+/* DSA driver for:
+ * Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch
+ * Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch
+ * Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch
+ * Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch
+ *
+ * These switches have a built-in 8051 CPU and can download and execute a
+ * firmware in this CPU. They can also be configured to use an external CPU
+ * handling the switch in a memory-mapped manner by connecting to that external
+ * CPU's memory bus.
+ *
+ * Copyright (C) 2018 Linus Wallej <linus.walleij@linaro.org>
+ * Includes portions of code from the firmware uploader by:
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_mdio.h>
+#include <linux/bitops.h>
+#include <linux/if_bridge.h>
+#include <linux/etherdevice.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+#include <linux/random.h>
+#include <net/dsa.h>
+
+#include "vitesse-vsc73xx.h"
+
+#define VSC73XX_BLOCK_MAC 0x1 /* Subblocks 0-4, 6 (CPU port) */
+#define VSC73XX_BLOCK_ANALYZER 0x2 /* Only subblock 0 */
+#define VSC73XX_BLOCK_MII 0x3 /* Subblocks 0 and 1 */
+#define VSC73XX_BLOCK_MEMINIT 0x3 /* Only subblock 2 */
+#define VSC73XX_BLOCK_CAPTURE 0x4 /* Only subblock 2 */
+#define VSC73XX_BLOCK_ARBITER 0x5 /* Only subblock 0 */
+#define VSC73XX_BLOCK_SYSTEM 0x7 /* Only subblock 0 */
+
+#define CPU_PORT 6 /* CPU port */
+
+/* MAC Block registers */
+#define VSC73XX_MAC_CFG 0x00
+#define VSC73XX_MACHDXGAP 0x02
+#define VSC73XX_FCCONF 0x04
+#define VSC73XX_FCMACHI 0x08
+#define VSC73XX_FCMACLO 0x0c
+#define VSC73XX_MAXLEN 0x10
+#define VSC73XX_ADVPORTM 0x19
+#define VSC73XX_TXUPDCFG 0x24
+#define VSC73XX_TXQ_SELECT_CFG 0x28
+#define VSC73XX_RXOCT 0x50
+#define VSC73XX_TXOCT 0x51
+#define VSC73XX_C_RX0 0x52
+#define VSC73XX_C_RX1 0x53
+#define VSC73XX_C_RX2 0x54
+#define VSC73XX_C_TX0 0x55
+#define VSC73XX_C_TX1 0x56
+#define VSC73XX_C_TX2 0x57
+#define VSC73XX_C_CFG 0x58
+#define VSC73XX_CAT_DROP 0x6e
+#define VSC73XX_CAT_PR_MISC_L2 0x6f
+#define VSC73XX_CAT_PR_USR_PRIO 0x75
+#define VSC73XX_Q_MISC_CONF 0xdf
+
+/* MAC_CFG register bits */
+#define VSC73XX_MAC_CFG_WEXC_DIS BIT(31)
+#define VSC73XX_MAC_CFG_PORT_RST BIT(29)
+#define VSC73XX_MAC_CFG_TX_EN BIT(28)
+#define VSC73XX_MAC_CFG_SEED_LOAD BIT(27)
+#define VSC73XX_MAC_CFG_SEED_MASK GENMASK(26, 19)
+#define VSC73XX_MAC_CFG_SEED_OFFSET 19
+#define VSC73XX_MAC_CFG_FDX BIT(18)
+#define VSC73XX_MAC_CFG_GIGA_MODE BIT(17)
+#define VSC73XX_MAC_CFG_RX_EN BIT(16)
+#define VSC73XX_MAC_CFG_VLAN_DBLAWR BIT(15)
+#define VSC73XX_MAC_CFG_VLAN_AWR BIT(14)
+#define VSC73XX_MAC_CFG_100_BASE_T BIT(13) /* Not in manual */
+#define VSC73XX_MAC_CFG_TX_IPG_MASK GENMASK(10, 6)
+#define VSC73XX_MAC_CFG_TX_IPG_OFFSET 6
+#define VSC73XX_MAC_CFG_TX_IPG_1000M (6 << VSC73XX_MAC_CFG_TX_IPG_OFFSET)
+#define VSC73XX_MAC_CFG_TX_IPG_100_10M (17 << VSC73XX_MAC_CFG_TX_IPG_OFFSET)
+#define VSC73XX_MAC_CFG_MAC_RX_RST BIT(5)
+#define VSC73XX_MAC_CFG_MAC_TX_RST BIT(4)
+#define VSC73XX_MAC_CFG_CLK_SEL_MASK GENMASK(2, 0)
+#define VSC73XX_MAC_CFG_CLK_SEL_OFFSET 0
+#define VSC73XX_MAC_CFG_CLK_SEL_1000M 1
+#define VSC73XX_MAC_CFG_CLK_SEL_100M 2
+#define VSC73XX_MAC_CFG_CLK_SEL_10M 3
+#define VSC73XX_MAC_CFG_CLK_SEL_EXT 4
+
+#define VSC73XX_MAC_CFG_1000M_F_PHY (VSC73XX_MAC_CFG_FDX | \
+ VSC73XX_MAC_CFG_GIGA_MODE | \
+ VSC73XX_MAC_CFG_TX_IPG_1000M | \
+ VSC73XX_MAC_CFG_CLK_SEL_EXT)
+#define VSC73XX_MAC_CFG_100_10M_F_PHY (VSC73XX_MAC_CFG_FDX | \
+ VSC73XX_MAC_CFG_TX_IPG_100_10M | \
+ VSC73XX_MAC_CFG_CLK_SEL_EXT)
+#define VSC73XX_MAC_CFG_100_10M_H_PHY (VSC73XX_MAC_CFG_TX_IPG_100_10M | \
+ VSC73XX_MAC_CFG_CLK_SEL_EXT)
+#define VSC73XX_MAC_CFG_1000M_F_RGMII (VSC73XX_MAC_CFG_FDX | \
+ VSC73XX_MAC_CFG_GIGA_MODE | \
+ VSC73XX_MAC_CFG_TX_IPG_1000M | \
+ VSC73XX_MAC_CFG_CLK_SEL_1000M)
+#define VSC73XX_MAC_CFG_RESET (VSC73XX_MAC_CFG_PORT_RST | \
+ VSC73XX_MAC_CFG_MAC_RX_RST | \
+ VSC73XX_MAC_CFG_MAC_TX_RST)
+
+/* Flow control register bits */
+#define VSC73XX_FCCONF_ZERO_PAUSE_EN BIT(17)
+#define VSC73XX_FCCONF_FLOW_CTRL_OBEY BIT(16)
+#define VSC73XX_FCCONF_PAUSE_VAL_MASK GENMASK(15, 0)
+
+/* ADVPORTM advanced port setup register bits */
+#define VSC73XX_ADVPORTM_IFG_PPM BIT(7)
+#define VSC73XX_ADVPORTM_EXC_COL_CONT BIT(6)
+#define VSC73XX_ADVPORTM_EXT_PORT BIT(5)
+#define VSC73XX_ADVPORTM_INV_GTX BIT(4)
+#define VSC73XX_ADVPORTM_ENA_GTX BIT(3)
+#define VSC73XX_ADVPORTM_DDR_MODE BIT(2)
+#define VSC73XX_ADVPORTM_IO_LOOPBACK BIT(1)
+#define VSC73XX_ADVPORTM_HOST_LOOPBACK BIT(0)
+
+/* CAT_DROP categorizer frame dropping register bits */
+#define VSC73XX_CAT_DROP_DROP_MC_SMAC_ENA BIT(6)
+#define VSC73XX_CAT_DROP_FWD_CTRL_ENA BIT(4)
+#define VSC73XX_CAT_DROP_FWD_PAUSE_ENA BIT(3)
+#define VSC73XX_CAT_DROP_UNTAGGED_ENA BIT(2)
+#define VSC73XX_CAT_DROP_TAGGED_ENA BIT(1)
+#define VSC73XX_CAT_DROP_NULL_MAC_ENA BIT(0)
+
+#define VSC73XX_Q_MISC_CONF_EXTENT_MEM BIT(31)
+#define VSC73XX_Q_MISC_CONF_EARLY_TX_MASK GENMASK(4, 1)
+#define VSC73XX_Q_MISC_CONF_EARLY_TX_512 (1 << 1)
+#define VSC73XX_Q_MISC_CONF_MAC_PAUSE_MODE BIT(0)
+
+/* Frame analyzer block 2 registers */
+#define VSC73XX_STORMLIMIT 0x02
+#define VSC73XX_ADVLEARN 0x03
+#define VSC73XX_IFLODMSK 0x04
+#define VSC73XX_VLANMASK 0x05
+#define VSC73XX_MACHDATA 0x06
+#define VSC73XX_MACLDATA 0x07
+#define VSC73XX_ANMOVED 0x08
+#define VSC73XX_ANAGEFIL 0x09
+#define VSC73XX_ANEVENTS 0x0a
+#define VSC73XX_ANCNTMASK 0x0b
+#define VSC73XX_ANCNTVAL 0x0c
+#define VSC73XX_LEARNMASK 0x0d
+#define VSC73XX_UFLODMASK 0x0e
+#define VSC73XX_MFLODMASK 0x0f
+#define VSC73XX_RECVMASK 0x10
+#define VSC73XX_AGGRCTRL 0x20
+#define VSC73XX_AGGRMSKS 0x30 /* Until 0x3f */
+#define VSC73XX_DSTMASKS 0x40 /* Until 0x7f */
+#define VSC73XX_SRCMASKS 0x80 /* Until 0x87 */
+#define VSC73XX_CAPENAB 0xa0
+#define VSC73XX_MACACCESS 0xb0
+#define VSC73XX_IPMCACCESS 0xb1
+#define VSC73XX_MACTINDX 0xc0
+#define VSC73XX_VLANACCESS 0xd0
+#define VSC73XX_VLANTIDX 0xe0
+#define VSC73XX_AGENCTRL 0xf0
+#define VSC73XX_CAPRST 0xff
+
+#define VSC73XX_MACACCESS_CPU_COPY BIT(14)
+#define VSC73XX_MACACCESS_FWD_KILL BIT(13)
+#define VSC73XX_MACACCESS_IGNORE_VLAN BIT(12)
+#define VSC73XX_MACACCESS_AGED_FLAG BIT(11)
+#define VSC73XX_MACACCESS_VALID BIT(10)
+#define VSC73XX_MACACCESS_LOCKED BIT(9)
+#define VSC73XX_MACACCESS_DEST_IDX_MASK GENMASK(8, 3)
+#define VSC73XX_MACACCESS_CMD_MASK GENMASK(2, 0)
+#define VSC73XX_MACACCESS_CMD_IDLE 0
+#define VSC73XX_MACACCESS_CMD_LEARN 1
+#define VSC73XX_MACACCESS_CMD_FORGET 2
+#define VSC73XX_MACACCESS_CMD_AGE_TABLE 3
+#define VSC73XX_MACACCESS_CMD_FLUSH_TABLE 4
+#define VSC73XX_MACACCESS_CMD_CLEAR_TABLE 5
+#define VSC73XX_MACACCESS_CMD_READ_ENTRY 6
+#define VSC73XX_MACACCESS_CMD_WRITE_ENTRY 7
+
+#define VSC73XX_VLANACCESS_LEARN_DISABLED BIT(30)
+#define VSC73XX_VLANACCESS_VLAN_MIRROR BIT(29)
+#define VSC73XX_VLANACCESS_VLAN_SRC_CHECK BIT(28)
+#define VSC73XX_VLANACCESS_VLAN_PORT_MASK GENMASK(9, 2)
+#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_MASK GENMASK(2, 0)
+#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_IDLE 0
+#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_READ_ENTRY 1
+#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_WRITE_ENTRY 2
+#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_CLEAR_TABLE 3
+
+/* MII block 3 registers */
+#define VSC73XX_MII_STAT 0x0
+#define VSC73XX_MII_CMD 0x1
+#define VSC73XX_MII_DATA 0x2
+
+/* Arbiter block 5 registers */
+#define VSC73XX_ARBEMPTY 0x0c
+#define VSC73XX_ARBDISC 0x0e
+#define VSC73XX_SBACKWDROP 0x12
+#define VSC73XX_DBACKWDROP 0x13
+#define VSC73XX_ARBBURSTPROB 0x15
+
+/* System block 7 registers */
+#define VSC73XX_ICPU_SIPAD 0x01
+#define VSC73XX_GMIIDELAY 0x05
+#define VSC73XX_ICPU_CTRL 0x10
+#define VSC73XX_ICPU_ADDR 0x11
+#define VSC73XX_ICPU_SRAM 0x12
+#define VSC73XX_HWSEM 0x13
+#define VSC73XX_GLORESET 0x14
+#define VSC73XX_ICPU_MBOX_VAL 0x15
+#define VSC73XX_ICPU_MBOX_SET 0x16
+#define VSC73XX_ICPU_MBOX_CLR 0x17
+#define VSC73XX_CHIPID 0x18
+#define VSC73XX_GPIO 0x34
+
+#define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_NONE 0
+#define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_1_4_NS 1
+#define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_1_7_NS 2
+#define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_2_0_NS 3
+
+#define VSC73XX_GMIIDELAY_GMII0_RXDELAY_NONE (0 << 4)
+#define VSC73XX_GMIIDELAY_GMII0_RXDELAY_1_4_NS (1 << 4)
+#define VSC73XX_GMIIDELAY_GMII0_RXDELAY_1_7_NS (2 << 4)
+#define VSC73XX_GMIIDELAY_GMII0_RXDELAY_2_0_NS (3 << 4)
+
+#define VSC73XX_ICPU_CTRL_WATCHDOG_RST BIT(31)
+#define VSC73XX_ICPU_CTRL_CLK_DIV_MASK GENMASK(12, 8)
+#define VSC73XX_ICPU_CTRL_SRST_HOLD BIT(7)
+#define VSC73XX_ICPU_CTRL_ICPU_PI_EN BIT(6)
+#define VSC73XX_ICPU_CTRL_BOOT_EN BIT(3)
+#define VSC73XX_ICPU_CTRL_EXT_ACC_EN BIT(2)
+#define VSC73XX_ICPU_CTRL_CLK_EN BIT(1)
+#define VSC73XX_ICPU_CTRL_SRST BIT(0)
+
+#define VSC73XX_CHIPID_ID_SHIFT 12
+#define VSC73XX_CHIPID_ID_MASK 0xffff
+#define VSC73XX_CHIPID_REV_SHIFT 28
+#define VSC73XX_CHIPID_REV_MASK 0xf
+#define VSC73XX_CHIPID_ID_7385 0x7385
+#define VSC73XX_CHIPID_ID_7388 0x7388
+#define VSC73XX_CHIPID_ID_7395 0x7395
+#define VSC73XX_CHIPID_ID_7398 0x7398
+
+#define VSC73XX_GLORESET_STROBE BIT(4)
+#define VSC73XX_GLORESET_ICPU_LOCK BIT(3)
+#define VSC73XX_GLORESET_MEM_LOCK BIT(2)
+#define VSC73XX_GLORESET_PHY_RESET BIT(1)
+#define VSC73XX_GLORESET_MASTER_RESET BIT(0)
+
+#define VSC7385_CLOCK_DELAY ((3 << 4) | 3)
+#define VSC7385_CLOCK_DELAY_MASK ((3 << 4) | 3)
+
+#define VSC73XX_ICPU_CTRL_STOP (VSC73XX_ICPU_CTRL_SRST_HOLD | \
+ VSC73XX_ICPU_CTRL_BOOT_EN | \
+ VSC73XX_ICPU_CTRL_EXT_ACC_EN)
+
+#define VSC73XX_ICPU_CTRL_START (VSC73XX_ICPU_CTRL_CLK_DIV | \
+ VSC73XX_ICPU_CTRL_BOOT_EN | \
+ VSC73XX_ICPU_CTRL_CLK_EN | \
+ VSC73XX_ICPU_CTRL_SRST)
+
+#define IS_7385(a) ((a)->chipid == VSC73XX_CHIPID_ID_7385)
+#define IS_7388(a) ((a)->chipid == VSC73XX_CHIPID_ID_7388)
+#define IS_7395(a) ((a)->chipid == VSC73XX_CHIPID_ID_7395)
+#define IS_7398(a) ((a)->chipid == VSC73XX_CHIPID_ID_7398)
+#define IS_739X(a) (IS_7395(a) || IS_7398(a))
+
+struct vsc73xx_counter {
+ u8 counter;
+ const char *name;
+};
+
+/* Counters are named according to the MIB standards where applicable.
+ * Some counters are custom, non-standard. The standard counters are
+ * named in accordance with RFC2819, RFC2021 and IEEE Std 802.3-2002 Annex
+ * 30A Counters.
+ */
+static const struct vsc73xx_counter vsc73xx_rx_counters[] = {
+ { 0, "RxEtherStatsPkts" },
+ { 1, "RxBroadcast+MulticastPkts" }, /* non-standard counter */
+ { 2, "RxTotalErrorPackets" }, /* non-standard counter */
+ { 3, "RxEtherStatsBroadcastPkts" },
+ { 4, "RxEtherStatsMulticastPkts" },
+ { 5, "RxEtherStatsPkts64Octets" },
+ { 6, "RxEtherStatsPkts65to127Octets" },
+ { 7, "RxEtherStatsPkts128to255Octets" },
+ { 8, "RxEtherStatsPkts256to511Octets" },
+ { 9, "RxEtherStatsPkts512to1023Octets" },
+ { 10, "RxEtherStatsPkts1024to1518Octets" },
+ { 11, "RxJumboFrames" }, /* non-standard counter */
+ { 12, "RxaPauseMACControlFramesTransmitted" },
+ { 13, "RxFIFODrops" }, /* non-standard counter */
+ { 14, "RxBackwardDrops" }, /* non-standard counter */
+ { 15, "RxClassifierDrops" }, /* non-standard counter */
+ { 16, "RxEtherStatsCRCAlignErrors" },
+ { 17, "RxEtherStatsUndersizePkts" },
+ { 18, "RxEtherStatsOversizePkts" },
+ { 19, "RxEtherStatsFragments" },
+ { 20, "RxEtherStatsJabbers" },
+ { 21, "RxaMACControlFramesReceived" },
+ /* 22-24 are undefined */
+ { 25, "RxaFramesReceivedOK" },
+ { 26, "RxQoSClass0" }, /* non-standard counter */
+ { 27, "RxQoSClass1" }, /* non-standard counter */
+ { 28, "RxQoSClass2" }, /* non-standard counter */
+ { 29, "RxQoSClass3" }, /* non-standard counter */
+};
+
+static const struct vsc73xx_counter vsc73xx_tx_counters[] = {
+ { 0, "TxEtherStatsPkts" },
+ { 1, "TxBroadcast+MulticastPkts" }, /* non-standard counter */
+ { 2, "TxTotalErrorPackets" }, /* non-standard counter */
+ { 3, "TxEtherStatsBroadcastPkts" },
+ { 4, "TxEtherStatsMulticastPkts" },
+ { 5, "TxEtherStatsPkts64Octets" },
+ { 6, "TxEtherStatsPkts65to127Octets" },
+ { 7, "TxEtherStatsPkts128to255Octets" },
+ { 8, "TxEtherStatsPkts256to511Octets" },
+ { 9, "TxEtherStatsPkts512to1023Octets" },
+ { 10, "TxEtherStatsPkts1024to1518Octets" },
+ { 11, "TxJumboFrames" }, /* non-standard counter */
+ { 12, "TxaPauseMACControlFramesTransmitted" },
+ { 13, "TxFIFODrops" }, /* non-standard counter */
+ { 14, "TxDrops" }, /* non-standard counter */
+ { 15, "TxEtherStatsCollisions" },
+ { 16, "TxEtherStatsCRCAlignErrors" },
+ { 17, "TxEtherStatsUndersizePkts" },
+ { 18, "TxEtherStatsOversizePkts" },
+ { 19, "TxEtherStatsFragments" },
+ { 20, "TxEtherStatsJabbers" },
+ /* 21-24 are undefined */
+ { 25, "TxaFramesReceivedOK" },
+ { 26, "TxQoSClass0" }, /* non-standard counter */
+ { 27, "TxQoSClass1" }, /* non-standard counter */
+ { 28, "TxQoSClass2" }, /* non-standard counter */
+ { 29, "TxQoSClass3" }, /* non-standard counter */
+};
+
+int vsc73xx_is_addr_valid(u8 block, u8 subblock)
+{
+ switch (block) {
+ case VSC73XX_BLOCK_MAC:
+ switch (subblock) {
+ case 0 ... 4:
+ case 6:
+ return 1;
+ }
+ break;
+
+ case VSC73XX_BLOCK_ANALYZER:
+ case VSC73XX_BLOCK_SYSTEM:
+ switch (subblock) {
+ case 0:
+ return 1;
+ }
+ break;
+
+ case VSC73XX_BLOCK_MII:
+ case VSC73XX_BLOCK_CAPTURE:
+ case VSC73XX_BLOCK_ARBITER:
+ switch (subblock) {
+ case 0 ... 1:
+ return 1;
+ }
+ break;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(vsc73xx_is_addr_valid);
+
+static int vsc73xx_read(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg,
+ u32 *val)
+{
+ return vsc->ops->read(vsc, block, subblock, reg, val);
+}
+
+static int vsc73xx_write(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg,
+ u32 val)
+{
+ return vsc->ops->write(vsc, block, subblock, reg, val);
+}
+
+static int vsc73xx_update_bits(struct vsc73xx *vsc, u8 block, u8 subblock,
+ u8 reg, u32 mask, u32 val)
+{
+ u32 tmp, orig;
+ int ret;
+
+ /* Same read-modify-write algorithm as e.g. regmap */
+ ret = vsc73xx_read(vsc, block, subblock, reg, &orig);
+ if (ret)
+ return ret;
+ tmp = orig & ~mask;
+ tmp |= val & mask;
+ return vsc73xx_write(vsc, block, subblock, reg, tmp);
+}
+
+static int vsc73xx_detect(struct vsc73xx *vsc)
+{
+ bool icpu_si_boot_en;
+ bool icpu_pi_en;
+ u32 val;
+ u32 rev;
+ int ret;
+ u32 id;
+
+ ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+ VSC73XX_ICPU_MBOX_VAL, &val);
+ if (ret) {
+ dev_err(vsc->dev, "unable to read mailbox (%d)\n", ret);
+ return ret;
+ }
+
+ if (val == 0xffffffff) {
+ dev_info(vsc->dev, "chip seems dead.\n");
+ return -EAGAIN;
+ }
+
+ ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+ VSC73XX_CHIPID, &val);
+ if (ret) {
+ dev_err(vsc->dev, "unable to read chip id (%d)\n", ret);
+ return ret;
+ }
+
+ id = (val >> VSC73XX_CHIPID_ID_SHIFT) &
+ VSC73XX_CHIPID_ID_MASK;
+ switch (id) {
+ case VSC73XX_CHIPID_ID_7385:
+ case VSC73XX_CHIPID_ID_7388:
+ case VSC73XX_CHIPID_ID_7395:
+ case VSC73XX_CHIPID_ID_7398:
+ break;
+ default:
+ dev_err(vsc->dev, "unsupported chip, id=%04x\n", id);
+ return -ENODEV;
+ }
+
+ vsc->chipid = id;
+ rev = (val >> VSC73XX_CHIPID_REV_SHIFT) &
+ VSC73XX_CHIPID_REV_MASK;
+ dev_info(vsc->dev, "VSC%04X (rev: %d) switch found\n", id, rev);
+
+ ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+ VSC73XX_ICPU_CTRL, &val);
+ if (ret) {
+ dev_err(vsc->dev, "unable to read iCPU control\n");
+ return ret;
+ }
+
+ /* The iCPU can always be used but can boot in different ways.
+ * If it is initially disabled and has no external memory,
+ * we are in control and can do whatever we like, else we
+ * are probably in trouble (we need some way to communicate
+ * with the running firmware) so we bail out for now.
+ */
+ icpu_pi_en = !!(val & VSC73XX_ICPU_CTRL_ICPU_PI_EN);
+ icpu_si_boot_en = !!(val & VSC73XX_ICPU_CTRL_BOOT_EN);
+ if (icpu_si_boot_en && icpu_pi_en) {
+ dev_err(vsc->dev,
+ "iCPU enabled boots from SI, has external memory\n");
+ dev_err(vsc->dev, "no idea how to deal with this\n");
+ return -ENODEV;
+ }
+ if (icpu_si_boot_en && !icpu_pi_en) {
+ dev_err(vsc->dev,
+ "iCPU enabled boots from PI/SI, no external memory\n");
+ return -EAGAIN;
+ }
+ if (!icpu_si_boot_en && icpu_pi_en) {
+ dev_err(vsc->dev,
+ "iCPU enabled, boots from PI external memory\n");
+ dev_err(vsc->dev, "no idea how to deal with this\n");
+ return -ENODEV;
+ }
+ /* !icpu_si_boot_en && !cpu_pi_en */
+ dev_info(vsc->dev, "iCPU disabled, no external memory\n");
+
+ return 0;
+}
+
+static int vsc73xx_phy_read(struct dsa_switch *ds, int phy, int regnum)
+{
+ struct vsc73xx *vsc = ds->priv;
+ u32 cmd;
+ u32 val;
+ int ret;
+
+ /* Setting bit 26 means "read" */
+ cmd = BIT(26) | (phy << 21) | (regnum << 16);
+ ret = vsc73xx_write(vsc, VSC73XX_BLOCK_MII, 0, 1, cmd);
+ if (ret)
+ return ret;
+ msleep(2);
+ ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MII, 0, 2, &val);
+ if (ret)
+ return ret;
+ if (val & BIT(16)) {
+ dev_err(vsc->dev, "reading reg %02x from phy%d failed\n",
+ regnum, phy);
+ return -EIO;
+ }
+ val &= 0xFFFFU;
+
+ dev_dbg(vsc->dev, "read reg %02x from phy%d = %04x\n",
+ regnum, phy, val);
+
+ return val;
+}
+
+static int vsc73xx_phy_write(struct dsa_switch *ds, int phy, int regnum,
+ u16 val)
+{
+ struct vsc73xx *vsc = ds->priv;
+ u32 cmd;
+ int ret;
+
+ /* It was found through tedious experiments that this router
+ * chip really hates to have it's PHYs reset. They
+ * never recover if that happens: autonegotiation stops
+ * working after a reset. Just filter out this command.
+ * (Resetting the whole chip is OK.)
+ */
+ if (regnum == 0 && (val & BIT(15))) {
+ dev_info(vsc->dev, "reset PHY - disallowed\n");
+ return 0;
+ }
+
+ cmd = (phy << 21) | (regnum << 16);
+ ret = vsc73xx_write(vsc, VSC73XX_BLOCK_MII, 0, 1, cmd);
+ if (ret)
+ return ret;
+
+ dev_dbg(vsc->dev, "write %04x to reg %02x in phy%d\n",
+ val, regnum, phy);
+ return 0;
+}
+
+static enum dsa_tag_protocol vsc73xx_get_tag_protocol(struct dsa_switch *ds,
+ int port,
+ enum dsa_tag_protocol mp)
+{
+ /* The switch internally uses a 8 byte header with length,
+ * source port, tag, LPA and priority. This is supposedly
+ * only accessible when operating the switch using the internal
+ * CPU or with an external CPU mapping the device in, but not
+ * when operating the switch over SPI and putting frames in/out
+ * on port 6 (the CPU port). So far we must assume that we
+ * cannot access the tag. (See "Internal frame header" section
+ * 3.9.1 in the manual.)
+ */
+ return DSA_TAG_PROTO_NONE;
+}
+
+static int vsc73xx_setup(struct dsa_switch *ds)
+{
+ struct vsc73xx *vsc = ds->priv;
+ int i;
+
+ dev_info(vsc->dev, "set up the switch\n");
+
+ /* Issue RESET */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET,
+ VSC73XX_GLORESET_MASTER_RESET);
+ usleep_range(125, 200);
+
+ /* Initialize memory, initialize RAM bank 0..15 except 6 and 7
+ * This sequence appears in the
+ * VSC7385 SparX-G5 datasheet section 6.6.1
+ * VSC7395 SparX-G5e datasheet section 6.6.1
+ * "initialization sequence".
+ * No explanation is given to the 0x1010400 magic number.
+ */
+ for (i = 0; i <= 15; i++) {
+ if (i != 6 && i != 7) {
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MEMINIT,
+ 2,
+ 0, 0x1010400 + i);
+ mdelay(1);
+ }
+ }
+ mdelay(30);
+
+ /* Clear MAC table */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+ VSC73XX_MACACCESS,
+ VSC73XX_MACACCESS_CMD_CLEAR_TABLE);
+
+ /* Clear VLAN table */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+ VSC73XX_VLANACCESS,
+ VSC73XX_VLANACCESS_VLAN_TBL_CMD_CLEAR_TABLE);
+
+ msleep(40);
+
+ /* Use 20KiB buffers on all ports on VSC7395
+ * The VSC7385 has 16KiB buffers and that is the
+ * default if we don't set this up explicitly.
+ * Port "31" is "all ports".
+ */
+ if (IS_739X(vsc))
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, 0x1f,
+ VSC73XX_Q_MISC_CONF,
+ VSC73XX_Q_MISC_CONF_EXTENT_MEM);
+
+ /* Put all ports into reset until enabled */
+ for (i = 0; i < 7; i++) {
+ if (i == 5)
+ continue;
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, 4,
+ VSC73XX_MAC_CFG, VSC73XX_MAC_CFG_RESET);
+ }
+
+ /* MII delay, set both GTX and RX delay to 2 ns */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GMIIDELAY,
+ VSC73XX_GMIIDELAY_GMII0_GTXDELAY_2_0_NS |
+ VSC73XX_GMIIDELAY_GMII0_RXDELAY_2_0_NS);
+ /* Enable reception of frames on all ports */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_RECVMASK,
+ 0x5f);
+ /* IP multicast flood mask (table 144) */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_IFLODMSK,
+ 0xff);
+
+ mdelay(50);
+
+ /* Release reset from the internal PHYs */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET,
+ VSC73XX_GLORESET_PHY_RESET);
+
+ udelay(4);
+
+ return 0;
+}
+
+static void vsc73xx_init_port(struct vsc73xx *vsc, int port)
+{
+ u32 val;
+
+ /* MAC configure, first reset the port and then write defaults */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+ port,
+ VSC73XX_MAC_CFG,
+ VSC73XX_MAC_CFG_RESET);
+
+ /* Take up the port in 1Gbit mode by default, this will be
+ * augmented after auto-negotiation on the PHY-facing
+ * ports.
+ */
+ if (port == CPU_PORT)
+ val = VSC73XX_MAC_CFG_1000M_F_RGMII;
+ else
+ val = VSC73XX_MAC_CFG_1000M_F_PHY;
+
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+ port,
+ VSC73XX_MAC_CFG,
+ val |
+ VSC73XX_MAC_CFG_TX_EN |
+ VSC73XX_MAC_CFG_RX_EN);
+
+ /* Flow control for the CPU port:
+ * Use a zero delay pause frame when pause condition is left
+ * Obey pause control frames
+ */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+ port,
+ VSC73XX_FCCONF,
+ VSC73XX_FCCONF_ZERO_PAUSE_EN |
+ VSC73XX_FCCONF_FLOW_CTRL_OBEY);
+
+ /* Issue pause control frames on PHY facing ports.
+ * Allow early initiation of MAC transmission if the amount
+ * of egress data is below 512 bytes on CPU port.
+ * FIXME: enable 20KiB buffers?
+ */
+ if (port == CPU_PORT)
+ val = VSC73XX_Q_MISC_CONF_EARLY_TX_512;
+ else
+ val = VSC73XX_Q_MISC_CONF_MAC_PAUSE_MODE;
+ val |= VSC73XX_Q_MISC_CONF_EXTENT_MEM;
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+ port,
+ VSC73XX_Q_MISC_CONF,
+ val);
+
+ /* Flow control MAC: a MAC address used in flow control frames */
+ val = (vsc->addr[5] << 16) | (vsc->addr[4] << 8) | (vsc->addr[3]);
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+ port,
+ VSC73XX_FCMACHI,
+ val);
+ val = (vsc->addr[2] << 16) | (vsc->addr[1] << 8) | (vsc->addr[0]);
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+ port,
+ VSC73XX_FCMACLO,
+ val);
+
+ /* Tell the categorizer to forward pause frames, not control
+ * frame. Do not drop anything.
+ */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+ port,
+ VSC73XX_CAT_DROP,
+ VSC73XX_CAT_DROP_FWD_PAUSE_ENA);
+
+ /* Clear all counters */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+ port, VSC73XX_C_RX0, 0);
+}
+
+static void vsc73xx_adjust_enable_port(struct vsc73xx *vsc,
+ int port, struct phy_device *phydev,
+ u32 initval)
+{
+ u32 val = initval;
+ u8 seed;
+
+ /* Reset this port FIXME: break out subroutine */
+ val |= VSC73XX_MAC_CFG_RESET;
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, val);
+
+ /* Seed the port randomness with randomness */
+ get_random_bytes(&seed, 1);
+ val |= seed << VSC73XX_MAC_CFG_SEED_OFFSET;
+ val |= VSC73XX_MAC_CFG_SEED_LOAD;
+ val |= VSC73XX_MAC_CFG_WEXC_DIS;
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, val);
+
+ /* Flow control for the PHY facing ports:
+ * Use a zero delay pause frame when pause condition is left
+ * Obey pause control frames
+ * When generating pause frames, use 0xff as pause value
+ */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_FCCONF,
+ VSC73XX_FCCONF_ZERO_PAUSE_EN |
+ VSC73XX_FCCONF_FLOW_CTRL_OBEY |
+ 0xff);
+
+ /* Disallow backward dropping of frames from this port */
+ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
+ VSC73XX_SBACKWDROP, BIT(port), 0);
+
+ /* Enable TX, RX, deassert reset, stop loading seed */
+ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
+ VSC73XX_MAC_CFG,
+ VSC73XX_MAC_CFG_RESET | VSC73XX_MAC_CFG_SEED_LOAD |
+ VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN,
+ VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN);
+}
+
+static void vsc73xx_adjust_link(struct dsa_switch *ds, int port,
+ struct phy_device *phydev)
+{
+ struct vsc73xx *vsc = ds->priv;
+ u32 val;
+
+ /* Special handling of the CPU-facing port */
+ if (port == CPU_PORT) {
+ /* Other ports are already initialized but not this one */
+ vsc73xx_init_port(vsc, CPU_PORT);
+ /* Select the external port for this interface (EXT_PORT)
+ * Enable the GMII GTX external clock
+ * Use double data rate (DDR mode)
+ */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+ CPU_PORT,
+ VSC73XX_ADVPORTM,
+ VSC73XX_ADVPORTM_EXT_PORT |
+ VSC73XX_ADVPORTM_ENA_GTX |
+ VSC73XX_ADVPORTM_DDR_MODE);
+ }
+
+ /* This is the MAC confiuration that always need to happen
+ * after a PHY or the CPU port comes up or down.
+ */
+ if (!phydev->link) {
+ int maxloop = 10;
+
+ dev_dbg(vsc->dev, "port %d: went down\n",
+ port);
+
+ /* Disable RX on this port */
+ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
+ VSC73XX_MAC_CFG,
+ VSC73XX_MAC_CFG_RX_EN, 0);
+
+ /* Discard packets */
+ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
+ VSC73XX_ARBDISC, BIT(port), BIT(port));
+
+ /* Wait until queue is empty */
+ vsc73xx_read(vsc, VSC73XX_BLOCK_ARBITER, 0,
+ VSC73XX_ARBEMPTY, &val);
+ while (!(val & BIT(port))) {
+ msleep(1);
+ vsc73xx_read(vsc, VSC73XX_BLOCK_ARBITER, 0,
+ VSC73XX_ARBEMPTY, &val);
+ if (--maxloop == 0) {
+ dev_err(vsc->dev,
+ "timeout waiting for block arbiter\n");
+ /* Continue anyway */
+ break;
+ }
+ }
+
+ /* Put this port into reset */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG,
+ VSC73XX_MAC_CFG_RESET);
+
+ /* Accept packets again */
+ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
+ VSC73XX_ARBDISC, BIT(port), 0);
+
+ /* Allow backward dropping of frames from this port */
+ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
+ VSC73XX_SBACKWDROP, BIT(port), BIT(port));
+
+ /* Receive mask (disable forwarding) */
+ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+ VSC73XX_RECVMASK, BIT(port), 0);
+
+ return;
+ }
+
+ /* Figure out what speed was negotiated */
+ if (phydev->speed == SPEED_1000) {
+ dev_dbg(vsc->dev, "port %d: 1000 Mbit mode full duplex\n",
+ port);
+
+ /* Set up default for internal port or external RGMII */
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
+ val = VSC73XX_MAC_CFG_1000M_F_RGMII;
+ else
+ val = VSC73XX_MAC_CFG_1000M_F_PHY;
+ vsc73xx_adjust_enable_port(vsc, port, phydev, val);
+ } else if (phydev->speed == SPEED_100) {
+ if (phydev->duplex == DUPLEX_FULL) {
+ val = VSC73XX_MAC_CFG_100_10M_F_PHY;
+ dev_dbg(vsc->dev,
+ "port %d: 100 Mbit full duplex mode\n",
+ port);
+ } else {
+ val = VSC73XX_MAC_CFG_100_10M_H_PHY;
+ dev_dbg(vsc->dev,
+ "port %d: 100 Mbit half duplex mode\n",
+ port);
+ }
+ vsc73xx_adjust_enable_port(vsc, port, phydev, val);
+ } else if (phydev->speed == SPEED_10) {
+ if (phydev->duplex == DUPLEX_FULL) {
+ val = VSC73XX_MAC_CFG_100_10M_F_PHY;
+ dev_dbg(vsc->dev,
+ "port %d: 10 Mbit full duplex mode\n",
+ port);
+ } else {
+ val = VSC73XX_MAC_CFG_100_10M_H_PHY;
+ dev_dbg(vsc->dev,
+ "port %d: 10 Mbit half duplex mode\n",
+ port);
+ }
+ vsc73xx_adjust_enable_port(vsc, port, phydev, val);
+ } else {
+ dev_err(vsc->dev,
+ "could not adjust link: unknown speed\n");
+ }
+
+ /* Enable port (forwarding) in the receieve mask */
+ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+ VSC73XX_RECVMASK, BIT(port), BIT(port));
+}
+
+static int vsc73xx_port_enable(struct dsa_switch *ds, int port,
+ struct phy_device *phy)
+{
+ struct vsc73xx *vsc = ds->priv;
+
+ dev_info(vsc->dev, "enable port %d\n", port);
+ vsc73xx_init_port(vsc, port);
+
+ return 0;
+}
+
+static void vsc73xx_port_disable(struct dsa_switch *ds, int port)
+{
+ struct vsc73xx *vsc = ds->priv;
+
+ /* Just put the port into reset */
+ vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port,
+ VSC73XX_MAC_CFG, VSC73XX_MAC_CFG_RESET);
+}
+
+static const struct vsc73xx_counter *
+vsc73xx_find_counter(struct vsc73xx *vsc,
+ u8 counter,
+ bool tx)
+{
+ const struct vsc73xx_counter *cnts;
+ int num_cnts;
+ int i;
+
+ if (tx) {
+ cnts = vsc73xx_tx_counters;
+ num_cnts = ARRAY_SIZE(vsc73xx_tx_counters);
+ } else {
+ cnts = vsc73xx_rx_counters;
+ num_cnts = ARRAY_SIZE(vsc73xx_rx_counters);
+ }
+
+ for (i = 0; i < num_cnts; i++) {
+ const struct vsc73xx_counter *cnt;
+
+ cnt = &cnts[i];
+ if (cnt->counter == counter)
+ return cnt;
+ }
+
+ return NULL;
+}
+
+static void vsc73xx_get_strings(struct dsa_switch *ds, int port, u32 stringset,
+ uint8_t *data)
+{
+ const struct vsc73xx_counter *cnt;
+ struct vsc73xx *vsc = ds->priv;
+ u8 indices[6];
+ int i, j;
+ u32 val;
+ int ret;
+
+ if (stringset != ETH_SS_STATS)
+ return;
+
+ ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MAC, port,
+ VSC73XX_C_CFG, &val);
+ if (ret)
+ return;
+
+ indices[0] = (val & 0x1f); /* RX counter 0 */
+ indices[1] = ((val >> 5) & 0x1f); /* RX counter 1 */
+ indices[2] = ((val >> 10) & 0x1f); /* RX counter 2 */
+ indices[3] = ((val >> 16) & 0x1f); /* TX counter 0 */
+ indices[4] = ((val >> 21) & 0x1f); /* TX counter 1 */
+ indices[5] = ((val >> 26) & 0x1f); /* TX counter 2 */
+
+ /* The first counters is the RX octets */
+ j = 0;
+ strncpy(data + j * ETH_GSTRING_LEN,
+ "RxEtherStatsOctets", ETH_GSTRING_LEN);
+ j++;
+
+ /* Each port supports recording 3 RX counters and 3 TX counters,
+ * figure out what counters we use in this set-up and return the
+ * names of them. The hardware default counters will be number of
+ * packets on RX/TX, combined broadcast+multicast packets RX/TX and
+ * total error packets RX/TX.
+ */
+ for (i = 0; i < 3; i++) {
+ cnt = vsc73xx_find_counter(vsc, indices[i], false);
+ if (cnt)
+ strncpy(data + j * ETH_GSTRING_LEN,
+ cnt->name, ETH_GSTRING_LEN);
+ j++;
+ }
+
+ /* TX stats begins with the number of TX octets */
+ strncpy(data + j * ETH_GSTRING_LEN,
+ "TxEtherStatsOctets", ETH_GSTRING_LEN);
+ j++;
+
+ for (i = 3; i < 6; i++) {
+ cnt = vsc73xx_find_counter(vsc, indices[i], true);
+ if (cnt)
+ strncpy(data + j * ETH_GSTRING_LEN,
+ cnt->name, ETH_GSTRING_LEN);
+ j++;
+ }
+}
+
+static int vsc73xx_get_sset_count(struct dsa_switch *ds, int port, int sset)
+{
+ /* We only support SS_STATS */
+ if (sset != ETH_SS_STATS)
+ return 0;
+ /* RX and TX packets, then 3 RX counters, 3 TX counters */
+ return 8;
+}
+
+static void vsc73xx_get_ethtool_stats(struct dsa_switch *ds, int port,
+ uint64_t *data)
+{
+ struct vsc73xx *vsc = ds->priv;
+ u8 regs[] = {
+ VSC73XX_RXOCT,
+ VSC73XX_C_RX0,
+ VSC73XX_C_RX1,
+ VSC73XX_C_RX2,
+ VSC73XX_TXOCT,
+ VSC73XX_C_TX0,
+ VSC73XX_C_TX1,
+ VSC73XX_C_TX2,
+ };
+ u32 val;
+ int ret;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(regs); i++) {
+ ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MAC, port,
+ regs[i], &val);
+ if (ret) {
+ dev_err(vsc->dev, "error reading counter %d\n", i);
+ return;
+ }
+ data[i] = val;
+ }
+}
+
+static int vsc73xx_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
+{
+ struct vsc73xx *vsc = ds->priv;
+
+ return vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port,
+ VSC73XX_MAXLEN, new_mtu + ETH_HLEN + ETH_FCS_LEN);
+}
+
+/* According to application not "VSC7398 Jumbo Frames" setting
+ * up the frame size to 9.6 KB does not affect the performance on standard
+ * frames. It is clear from the application note that
+ * "9.6 kilobytes" == 9600 bytes.
+ */
+static int vsc73xx_get_max_mtu(struct dsa_switch *ds, int port)
+{
+ return 9600 - ETH_HLEN - ETH_FCS_LEN;
+}
+
+static const struct dsa_switch_ops vsc73xx_ds_ops = {
+ .get_tag_protocol = vsc73xx_get_tag_protocol,
+ .setup = vsc73xx_setup,
+ .phy_read = vsc73xx_phy_read,
+ .phy_write = vsc73xx_phy_write,
+ .adjust_link = vsc73xx_adjust_link,
+ .get_strings = vsc73xx_get_strings,
+ .get_ethtool_stats = vsc73xx_get_ethtool_stats,
+ .get_sset_count = vsc73xx_get_sset_count,
+ .port_enable = vsc73xx_port_enable,
+ .port_disable = vsc73xx_port_disable,
+ .port_change_mtu = vsc73xx_change_mtu,
+ .port_max_mtu = vsc73xx_get_max_mtu,
+};
+
+static int vsc73xx_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+ struct vsc73xx *vsc = gpiochip_get_data(chip);
+ u32 val;
+ int ret;
+
+ ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+ VSC73XX_GPIO, &val);
+ if (ret)
+ return ret;
+
+ return !!(val & BIT(offset));
+}
+
+static void vsc73xx_gpio_set(struct gpio_chip *chip, unsigned int offset,
+ int val)
+{
+ struct vsc73xx *vsc = gpiochip_get_data(chip);
+ u32 tmp = val ? BIT(offset) : 0;
+
+ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+ VSC73XX_GPIO, BIT(offset), tmp);
+}
+
+static int vsc73xx_gpio_direction_output(struct gpio_chip *chip,
+ unsigned int offset, int val)
+{
+ struct vsc73xx *vsc = gpiochip_get_data(chip);
+ u32 tmp = val ? BIT(offset) : 0;
+
+ return vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+ VSC73XX_GPIO, BIT(offset + 4) | BIT(offset),
+ BIT(offset + 4) | tmp);
+}
+
+static int vsc73xx_gpio_direction_input(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ struct vsc73xx *vsc = gpiochip_get_data(chip);
+
+ return vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+ VSC73XX_GPIO, BIT(offset + 4),
+ 0);
+}
+
+static int vsc73xx_gpio_get_direction(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ struct vsc73xx *vsc = gpiochip_get_data(chip);
+ u32 val;
+ int ret;
+
+ ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+ VSC73XX_GPIO, &val);
+ if (ret)
+ return ret;
+
+ return !(val & BIT(offset + 4));
+}
+
+static int vsc73xx_gpio_probe(struct vsc73xx *vsc)
+{
+ int ret;
+
+ vsc->gc.label = devm_kasprintf(vsc->dev, GFP_KERNEL, "VSC%04x",
+ vsc->chipid);
+ if (!vsc->gc.label)
+ return -ENOMEM;
+ vsc->gc.ngpio = 4;
+ vsc->gc.owner = THIS_MODULE;
+ vsc->gc.parent = vsc->dev;
+ vsc->gc.base = -1;
+ vsc->gc.get = vsc73xx_gpio_get;
+ vsc->gc.set = vsc73xx_gpio_set;
+ vsc->gc.direction_input = vsc73xx_gpio_direction_input;
+ vsc->gc.direction_output = vsc73xx_gpio_direction_output;
+ vsc->gc.get_direction = vsc73xx_gpio_get_direction;
+ vsc->gc.can_sleep = true;
+ ret = devm_gpiochip_add_data(vsc->dev, &vsc->gc, vsc);
+ if (ret) {
+ dev_err(vsc->dev, "unable to register GPIO chip\n");
+ return ret;
+ }
+ return 0;
+}
+
+int vsc73xx_probe(struct vsc73xx *vsc)
+{
+ struct device *dev = vsc->dev;
+ int ret;
+
+ /* Release reset, if any */
+ vsc->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(vsc->reset)) {
+ dev_err(dev, "failed to get RESET GPIO\n");
+ return PTR_ERR(vsc->reset);
+ }
+ if (vsc->reset)
+ /* Wait 20ms according to datasheet table 245 */
+ msleep(20);
+
+ ret = vsc73xx_detect(vsc);
+ if (ret == -EAGAIN) {
+ dev_err(vsc->dev,
+ "Chip seems to be out of control. Assert reset and try again.\n");
+ gpiod_set_value_cansleep(vsc->reset, 1);
+ /* Reset pulse should be 20ns minimum, according to datasheet
+ * table 245, so 10us should be fine
+ */
+ usleep_range(10, 100);
+ gpiod_set_value_cansleep(vsc->reset, 0);
+ /* Wait 20ms according to datasheet table 245 */
+ msleep(20);
+ ret = vsc73xx_detect(vsc);
+ }
+ if (ret) {
+ dev_err(dev, "no chip found (%d)\n", ret);
+ return -ENODEV;
+ }
+
+ eth_random_addr(vsc->addr);
+ dev_info(vsc->dev,
+ "MAC for control frames: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ vsc->addr[0], vsc->addr[1], vsc->addr[2],
+ vsc->addr[3], vsc->addr[4], vsc->addr[5]);
+
+ /* The VSC7395 switch chips have 5+1 ports which means 5
+ * ordinary ports and a sixth CPU port facing the processor
+ * with an RGMII interface. These ports are numbered 0..4
+ * and 6, so they leave a "hole" in the port map for port 5,
+ * which is invalid.
+ *
+ * The VSC7398 has 8 ports, port 7 is again the CPU port.
+ *
+ * We allocate 8 ports and avoid access to the nonexistant
+ * ports.
+ */
+ vsc->ds = devm_kzalloc(dev, sizeof(*vsc->ds), GFP_KERNEL);
+ if (!vsc->ds)
+ return -ENOMEM;
+
+ vsc->ds->dev = dev;
+ vsc->ds->num_ports = 8;
+ vsc->ds->priv = vsc;
+
+ vsc->ds->ops = &vsc73xx_ds_ops;
+ ret = dsa_register_switch(vsc->ds);
+ if (ret) {
+ dev_err(dev, "unable to register switch (%d)\n", ret);
+ return ret;
+ }
+
+ ret = vsc73xx_gpio_probe(vsc);
+ if (ret) {
+ dsa_unregister_switch(vsc->ds);
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(vsc73xx_probe);
+
+void vsc73xx_remove(struct vsc73xx *vsc)
+{
+ dsa_unregister_switch(vsc->ds);
+ gpiod_set_value(vsc->reset, 1);
+}
+EXPORT_SYMBOL(vsc73xx_remove);
+
+void vsc73xx_shutdown(struct vsc73xx *vsc)
+{
+ dsa_switch_shutdown(vsc->ds);
+}
+EXPORT_SYMBOL(vsc73xx_shutdown);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_DESCRIPTION("Vitesse VSC7385/7388/7395/7398 driver");
+MODULE_LICENSE("GPL v2");