diff options
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x.h')
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 2536 |
1 files changed, 2536 insertions, 0 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h new file mode 100644 index 000000000..dd5945c4b --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -0,0 +1,2536 @@ +/* bnx2x.h: QLogic Everest network driver. + * + * Copyright (c) 2007-2013 Broadcom Corporation + * Copyright (c) 2014 QLogic Corporation + * All rights reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Maintained by: Ariel Elior <ariel.elior@qlogic.com> + * Written by: Eliezer Tamir + * Based on code from Michael Chan's bnx2 driver + */ + +#ifndef BNX2X_H +#define BNX2X_H + +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/dma-mapping.h> +#include <linux/types.h> +#include <linux/pci_regs.h> + +#include <linux/ptp_clock_kernel.h> +#include <linux/net_tstamp.h> +#include <linux/timecounter.h> + +/* compilation time flags */ + +/* define this to make the driver freeze on error to allow getting debug info + * (you will need to reboot afterwards) */ +/* #define BNX2X_STOP_ON_ERROR */ + +/* FIXME: Delete the DRV_MODULE_VERSION below, but please be warned + * that it is not an easy task because such change has all chances + * to break this driver due to amount of abuse of in-kernel interfaces + * between modules and FW. + * + * DO NOT UPDATE DRV_MODULE_VERSION below. + */ +#define DRV_MODULE_VERSION "1.713.36-0" +#define BNX2X_BC_VER 0x040200 + +#if defined(CONFIG_DCB) +#define BCM_DCBNL +#endif + +#include "bnx2x_hsi.h" + +#include "../cnic_if.h" + +#define BNX2X_MIN_MSIX_VEC_CNT(bp) ((bp)->min_msix_vec_cnt) + +#include <linux/mdio.h> + +#include "bnx2x_reg.h" +#include "bnx2x_fw_defs.h" +#include "bnx2x_mfw_req.h" +#include "bnx2x_link.h" +#include "bnx2x_sp.h" +#include "bnx2x_dcb.h" +#include "bnx2x_stats.h" +#include "bnx2x_vfpf.h" + +enum bnx2x_int_mode { + BNX2X_INT_MODE_MSIX, + BNX2X_INT_MODE_INTX, + BNX2X_INT_MODE_MSI +}; + +/* error/debug prints */ + +#define DRV_MODULE_NAME "bnx2x" + +/* for messages that are currently off */ +#define BNX2X_MSG_OFF 0x0 +#define BNX2X_MSG_MCP 0x0010000 /* was: NETIF_MSG_HW */ +#define BNX2X_MSG_STATS 0x0020000 /* was: NETIF_MSG_TIMER */ +#define BNX2X_MSG_NVM 0x0040000 /* was: NETIF_MSG_HW */ +#define BNX2X_MSG_DMAE 0x0080000 /* was: NETIF_MSG_HW */ +#define BNX2X_MSG_SP 0x0100000 /* was: NETIF_MSG_INTR */ +#define BNX2X_MSG_FP 0x0200000 /* was: NETIF_MSG_INTR */ +#define BNX2X_MSG_IOV 0x0800000 +#define BNX2X_MSG_PTP 0x1000000 +#define BNX2X_MSG_IDLE 0x2000000 /* used for idle check*/ +#define BNX2X_MSG_ETHTOOL 0x4000000 +#define BNX2X_MSG_DCB 0x8000000 + +/* regular debug print */ +#define DP_INNER(fmt, ...) \ + pr_notice("[%s:%d(%s)]" fmt, \ + __func__, __LINE__, \ + bp->dev ? (bp->dev->name) : "?", \ + ##__VA_ARGS__); + +#define DP(__mask, fmt, ...) \ +do { \ + if (unlikely(bp->msg_enable & (__mask))) \ + DP_INNER(fmt, ##__VA_ARGS__); \ +} while (0) + +#define DP_AND(__mask, fmt, ...) \ +do { \ + if (unlikely((bp->msg_enable & (__mask)) == __mask)) \ + DP_INNER(fmt, ##__VA_ARGS__); \ +} while (0) + +#define DP_CONT(__mask, fmt, ...) \ +do { \ + if (unlikely(bp->msg_enable & (__mask))) \ + pr_cont(fmt, ##__VA_ARGS__); \ +} while (0) + +/* errors debug print */ +#define BNX2X_DBG_ERR(fmt, ...) \ +do { \ + if (unlikely(netif_msg_probe(bp))) \ + pr_err("[%s:%d(%s)]" fmt, \ + __func__, __LINE__, \ + bp->dev ? (bp->dev->name) : "?", \ + ##__VA_ARGS__); \ +} while (0) + +/* for errors (never masked) */ +#define BNX2X_ERR(fmt, ...) \ +do { \ + pr_err("[%s:%d(%s)]" fmt, \ + __func__, __LINE__, \ + bp->dev ? (bp->dev->name) : "?", \ + ##__VA_ARGS__); \ +} while (0) + +#define BNX2X_ERROR(fmt, ...) \ + pr_err("[%s:%d]" fmt, __func__, __LINE__, ##__VA_ARGS__) + +/* before we have a dev->name use dev_info() */ +#define BNX2X_DEV_INFO(fmt, ...) \ +do { \ + if (unlikely(netif_msg_probe(bp))) \ + dev_info(&bp->pdev->dev, fmt, ##__VA_ARGS__); \ +} while (0) + +/* Error handling */ +void bnx2x_panic_dump(struct bnx2x *bp, bool disable_int); +#ifdef BNX2X_STOP_ON_ERROR +#define bnx2x_panic() \ +do { \ + bp->panic = 1; \ + BNX2X_ERR("driver assert\n"); \ + bnx2x_panic_dump(bp, true); \ +} while (0) +#else +#define bnx2x_panic() \ +do { \ + bp->panic = 1; \ + BNX2X_ERR("driver assert\n"); \ + bnx2x_panic_dump(bp, false); \ +} while (0) +#endif + +#define bnx2x_mc_addr(ha) ((ha)->addr) +#define bnx2x_uc_addr(ha) ((ha)->addr) + +#define U64_LO(x) ((u32)(((u64)(x)) & 0xffffffff)) +#define U64_HI(x) ((u32)(((u64)(x)) >> 32)) +#define HILO_U64(hi, lo) ((((u64)(hi)) << 32) + (lo)) + +#define REG_ADDR(bp, offset) ((bp->regview) + (offset)) + +#define REG_RD(bp, offset) readl(REG_ADDR(bp, offset)) +#define REG_RD8(bp, offset) readb(REG_ADDR(bp, offset)) +#define REG_RD16(bp, offset) readw(REG_ADDR(bp, offset)) + +#define REG_WR_RELAXED(bp, offset, val) \ + writel_relaxed((u32)val, REG_ADDR(bp, offset)) + +#define REG_WR16_RELAXED(bp, offset, val) \ + writew_relaxed((u16)val, REG_ADDR(bp, offset)) + +#define REG_WR(bp, offset, val) writel((u32)val, REG_ADDR(bp, offset)) +#define REG_WR8(bp, offset, val) writeb((u8)val, REG_ADDR(bp, offset)) +#define REG_WR16(bp, offset, val) writew((u16)val, REG_ADDR(bp, offset)) + +#define REG_RD_IND(bp, offset) bnx2x_reg_rd_ind(bp, offset) +#define REG_WR_IND(bp, offset, val) bnx2x_reg_wr_ind(bp, offset, val) + +#define REG_RD_DMAE(bp, offset, valp, len32) \ + do { \ + bnx2x_read_dmae(bp, offset, len32);\ + memcpy(valp, bnx2x_sp(bp, wb_data[0]), (len32) * 4); \ + } while (0) + +#define REG_WR_DMAE(bp, offset, valp, len32) \ + do { \ + memcpy(bnx2x_sp(bp, wb_data[0]), valp, (len32) * 4); \ + bnx2x_write_dmae(bp, bnx2x_sp_mapping(bp, wb_data), \ + offset, len32); \ + } while (0) + +#define REG_WR_DMAE_LEN(bp, offset, valp, len32) \ + REG_WR_DMAE(bp, offset, valp, len32) + +#define VIRT_WR_DMAE_LEN(bp, data, addr, len32, le32_swap) \ + do { \ + memcpy(GUNZIP_BUF(bp), data, (len32) * 4); \ + bnx2x_write_big_buf_wb(bp, addr, len32); \ + } while (0) + +#define SHMEM_ADDR(bp, field) (bp->common.shmem_base + \ + offsetof(struct shmem_region, field)) +#define SHMEM_RD(bp, field) REG_RD(bp, SHMEM_ADDR(bp, field)) +#define SHMEM_WR(bp, field, val) REG_WR(bp, SHMEM_ADDR(bp, field), val) + +#define SHMEM2_ADDR(bp, field) (bp->common.shmem2_base + \ + offsetof(struct shmem2_region, field)) +#define SHMEM2_RD(bp, field) REG_RD(bp, SHMEM2_ADDR(bp, field)) +#define SHMEM2_WR(bp, field, val) REG_WR(bp, SHMEM2_ADDR(bp, field), val) +#define MF_CFG_ADDR(bp, field) (bp->common.mf_cfg_base + \ + offsetof(struct mf_cfg, field)) +#define MF2_CFG_ADDR(bp, field) (bp->common.mf2_cfg_base + \ + offsetof(struct mf2_cfg, field)) + +#define MF_CFG_RD(bp, field) REG_RD(bp, MF_CFG_ADDR(bp, field)) +#define MF_CFG_WR(bp, field, val) REG_WR(bp,\ + MF_CFG_ADDR(bp, field), (val)) +#define MF2_CFG_RD(bp, field) REG_RD(bp, MF2_CFG_ADDR(bp, field)) + +#define SHMEM2_HAS(bp, field) ((bp)->common.shmem2_base && \ + (SHMEM2_RD((bp), size) > \ + offsetof(struct shmem2_region, field))) + +#define EMAC_RD(bp, reg) REG_RD(bp, emac_base + reg) +#define EMAC_WR(bp, reg, val) REG_WR(bp, emac_base + reg, val) + +/* SP SB indices */ + +/* General SP events - stats query, cfc delete, etc */ +#define HC_SP_INDEX_ETH_DEF_CONS 3 + +/* EQ completions */ +#define HC_SP_INDEX_EQ_CONS 7 + +/* FCoE L2 connection completions */ +#define HC_SP_INDEX_ETH_FCOE_TX_CQ_CONS 6 +#define HC_SP_INDEX_ETH_FCOE_RX_CQ_CONS 4 +/* iSCSI L2 */ +#define HC_SP_INDEX_ETH_ISCSI_CQ_CONS 5 +#define HC_SP_INDEX_ETH_ISCSI_RX_CQ_CONS 1 + +/* Special clients parameters */ + +/* SB indices */ +/* FCoE L2 */ +#define BNX2X_FCOE_L2_RX_INDEX \ + (&bp->def_status_blk->sp_sb.\ + index_values[HC_SP_INDEX_ETH_FCOE_RX_CQ_CONS]) + +#define BNX2X_FCOE_L2_TX_INDEX \ + (&bp->def_status_blk->sp_sb.\ + index_values[HC_SP_INDEX_ETH_FCOE_TX_CQ_CONS]) + +/** + * CIDs and CLIDs: + * CLIDs below is a CLID for func 0, then the CLID for other + * functions will be calculated by the formula: + * + * FUNC_N_CLID_X = N * NUM_SPECIAL_CLIENTS + FUNC_0_CLID_X + * + */ +enum { + BNX2X_ISCSI_ETH_CL_ID_IDX, + BNX2X_FCOE_ETH_CL_ID_IDX, + BNX2X_MAX_CNIC_ETH_CL_ID_IDX, +}; + +/* use a value high enough to be above all the PFs, which has least significant + * nibble as 8, so when cnic needs to come up with a CID for UIO to use to + * calculate doorbell address according to old doorbell configuration scheme + * (db_msg_sz 1 << 7 * cid + 0x40 DPM offset) it can come up with a valid number + * We must avoid coming up with cid 8 for iscsi since according to this method + * the designated UIO cid will come out 0 and it has a special handling for that + * case which doesn't suit us. Therefore will will cieling to closes cid which + * has least signigifcant nibble 8 and if it is 8 we will move forward to 0x18. + */ + +#define BNX2X_1st_NON_L2_ETH_CID(bp) (BNX2X_NUM_NON_CNIC_QUEUES(bp) * \ + (bp)->max_cos) +/* amount of cids traversed by UIO's DPM addition to doorbell */ +#define UIO_DPM 8 +/* roundup to DPM offset */ +#define UIO_ROUNDUP(bp) (roundup(BNX2X_1st_NON_L2_ETH_CID(bp), \ + UIO_DPM)) +/* offset to nearest value which has lsb nibble matching DPM */ +#define UIO_CID_OFFSET(bp) ((UIO_ROUNDUP(bp) + UIO_DPM) % \ + (UIO_DPM * 2)) +/* add offset to rounded-up cid to get a value which could be used with UIO */ +#define UIO_DPM_ALIGN(bp) (UIO_ROUNDUP(bp) + UIO_CID_OFFSET(bp)) +/* but wait - avoid UIO special case for cid 0 */ +#define UIO_DPM_CID0_OFFSET(bp) ((UIO_DPM * 2) * \ + (UIO_DPM_ALIGN(bp) == UIO_DPM)) +/* Properly DPM aligned CID dajusted to cid 0 secal case */ +#define BNX2X_CNIC_START_ETH_CID(bp) (UIO_DPM_ALIGN(bp) + \ + (UIO_DPM_CID0_OFFSET(bp))) +/* how many cids were wasted - need this value for cid allocation */ +#define UIO_CID_PAD(bp) (BNX2X_CNIC_START_ETH_CID(bp) - \ + BNX2X_1st_NON_L2_ETH_CID(bp)) + /* iSCSI L2 */ +#define BNX2X_ISCSI_ETH_CID(bp) (BNX2X_CNIC_START_ETH_CID(bp)) + /* FCoE L2 */ +#define BNX2X_FCOE_ETH_CID(bp) (BNX2X_CNIC_START_ETH_CID(bp) + 1) + +#define CNIC_SUPPORT(bp) ((bp)->cnic_support) +#define CNIC_ENABLED(bp) ((bp)->cnic_enabled) +#define CNIC_LOADED(bp) ((bp)->cnic_loaded) +#define FCOE_INIT(bp) ((bp)->fcoe_init) + +#define AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR \ + AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR + +#define SM_RX_ID 0 +#define SM_TX_ID 1 + +/* defines for multiple tx priority indices */ +#define FIRST_TX_ONLY_COS_INDEX 1 +#define FIRST_TX_COS_INDEX 0 + +/* rules for calculating the cids of tx-only connections */ +#define CID_TO_FP(cid, bp) ((cid) % BNX2X_NUM_NON_CNIC_QUEUES(bp)) +#define CID_COS_TO_TX_ONLY_CID(cid, cos, bp) \ + (cid + cos * BNX2X_NUM_NON_CNIC_QUEUES(bp)) + +/* fp index inside class of service range */ +#define FP_COS_TO_TXQ(fp, cos, bp) \ + ((fp)->index + cos * BNX2X_NUM_NON_CNIC_QUEUES(bp)) + +/* Indexes for transmission queues array: + * txdata for RSS i CoS j is at location i + (j * num of RSS) + * txdata for FCoE (if exist) is at location max cos * num of RSS + * txdata for FWD (if exist) is one location after FCoE + * txdata for OOO (if exist) is one location after FWD + */ +enum { + FCOE_TXQ_IDX_OFFSET, + FWD_TXQ_IDX_OFFSET, + OOO_TXQ_IDX_OFFSET, +}; +#define MAX_ETH_TXQ_IDX(bp) (BNX2X_NUM_NON_CNIC_QUEUES(bp) * (bp)->max_cos) +#define FCOE_TXQ_IDX(bp) (MAX_ETH_TXQ_IDX(bp) + FCOE_TXQ_IDX_OFFSET) + +/* fast path */ +/* + * This driver uses new build_skb() API : + * RX ring buffer contains pointer to kmalloc() data only, + * skb are built only after Hardware filled the frame. + */ +struct sw_rx_bd { + u8 *data; + DEFINE_DMA_UNMAP_ADDR(mapping); +}; + +struct sw_tx_bd { + struct sk_buff *skb; + u16 first_bd; + u8 flags; +/* Set on the first BD descriptor when there is a split BD */ +#define BNX2X_TSO_SPLIT_BD (1<<0) +#define BNX2X_HAS_SECOND_PBD (1<<1) +}; + +struct sw_rx_page { + struct page *page; + DEFINE_DMA_UNMAP_ADDR(mapping); + unsigned int offset; +}; + +union db_prod { + struct doorbell_set_prod data; + u32 raw; +}; + +/* dropless fc FW/HW related params */ +#define BRB_SIZE(bp) (CHIP_IS_E3(bp) ? 1024 : 512) +#define MAX_AGG_QS(bp) (CHIP_IS_E1(bp) ? \ + ETH_MAX_AGGREGATION_QUEUES_E1 :\ + ETH_MAX_AGGREGATION_QUEUES_E1H_E2) +#define FW_DROP_LEVEL(bp) (3 + MAX_SPQ_PENDING + MAX_AGG_QS(bp)) +#define FW_PREFETCH_CNT 16 +#define DROPLESS_FC_HEADROOM 100 + +/* MC hsi */ +#define BCM_PAGE_SHIFT 12 +#define BCM_PAGE_SIZE (1 << BCM_PAGE_SHIFT) +#define BCM_PAGE_MASK (~(BCM_PAGE_SIZE - 1)) +#define BCM_PAGE_ALIGN(addr) (((addr) + BCM_PAGE_SIZE - 1) & BCM_PAGE_MASK) + +#define PAGES_PER_SGE_SHIFT 0 +#define PAGES_PER_SGE (1 << PAGES_PER_SGE_SHIFT) +#define SGE_PAGE_SHIFT 12 +#define SGE_PAGE_SIZE (1 << SGE_PAGE_SHIFT) +#define SGE_PAGE_MASK (~(SGE_PAGE_SIZE - 1)) +#define SGE_PAGE_ALIGN(addr) (((addr) + SGE_PAGE_SIZE - 1) & SGE_PAGE_MASK) +#define SGE_PAGES (SGE_PAGE_SIZE * PAGES_PER_SGE) +#define TPA_AGG_SIZE min_t(u32, (min_t(u32, 8, MAX_SKB_FRAGS) * \ + SGE_PAGES), 0xffff) + +/* SGE ring related macros */ +#define NUM_RX_SGE_PAGES 2 +#define RX_SGE_CNT (BCM_PAGE_SIZE / sizeof(struct eth_rx_sge)) +#define NEXT_PAGE_SGE_DESC_CNT 2 +#define MAX_RX_SGE_CNT (RX_SGE_CNT - NEXT_PAGE_SGE_DESC_CNT) +/* RX_SGE_CNT is promised to be a power of 2 */ +#define RX_SGE_MASK (RX_SGE_CNT - 1) +#define NUM_RX_SGE (RX_SGE_CNT * NUM_RX_SGE_PAGES) +#define MAX_RX_SGE (NUM_RX_SGE - 1) +#define NEXT_SGE_IDX(x) ((((x) & RX_SGE_MASK) == \ + (MAX_RX_SGE_CNT - 1)) ? \ + (x) + 1 + NEXT_PAGE_SGE_DESC_CNT : \ + (x) + 1) +#define RX_SGE(x) ((x) & MAX_RX_SGE) + +/* + * Number of required SGEs is the sum of two: + * 1. Number of possible opened aggregations (next packet for + * these aggregations will probably consume SGE immediately) + * 2. Rest of BRB blocks divided by 2 (block will consume new SGE only + * after placement on BD for new TPA aggregation) + * + * Takes into account NEXT_PAGE_SGE_DESC_CNT "next" elements on each page + */ +#define NUM_SGE_REQ (MAX_AGG_QS(bp) + \ + (BRB_SIZE(bp) - MAX_AGG_QS(bp)) / 2) +#define NUM_SGE_PG_REQ ((NUM_SGE_REQ + MAX_RX_SGE_CNT - 1) / \ + MAX_RX_SGE_CNT) +#define SGE_TH_LO(bp) (NUM_SGE_REQ + \ + NUM_SGE_PG_REQ * NEXT_PAGE_SGE_DESC_CNT) +#define SGE_TH_HI(bp) (SGE_TH_LO(bp) + DROPLESS_FC_HEADROOM) + +/* Manipulate a bit vector defined as an array of u64 */ + +/* Number of bits in one sge_mask array element */ +#define BIT_VEC64_ELEM_SZ 64 +#define BIT_VEC64_ELEM_SHIFT 6 +#define BIT_VEC64_ELEM_MASK ((u64)BIT_VEC64_ELEM_SZ - 1) + +#define __BIT_VEC64_SET_BIT(el, bit) \ + do { \ + el = ((el) | ((u64)0x1 << (bit))); \ + } while (0) + +#define __BIT_VEC64_CLEAR_BIT(el, bit) \ + do { \ + el = ((el) & (~((u64)0x1 << (bit)))); \ + } while (0) + +#define BIT_VEC64_SET_BIT(vec64, idx) \ + __BIT_VEC64_SET_BIT((vec64)[(idx) >> BIT_VEC64_ELEM_SHIFT], \ + (idx) & BIT_VEC64_ELEM_MASK) + +#define BIT_VEC64_CLEAR_BIT(vec64, idx) \ + __BIT_VEC64_CLEAR_BIT((vec64)[(idx) >> BIT_VEC64_ELEM_SHIFT], \ + (idx) & BIT_VEC64_ELEM_MASK) + +#define BIT_VEC64_TEST_BIT(vec64, idx) \ + (((vec64)[(idx) >> BIT_VEC64_ELEM_SHIFT] >> \ + ((idx) & BIT_VEC64_ELEM_MASK)) & 0x1) + +/* Creates a bitmask of all ones in less significant bits. + idx - index of the most significant bit in the created mask */ +#define BIT_VEC64_ONES_MASK(idx) \ + (((u64)0x1 << (((idx) & BIT_VEC64_ELEM_MASK) + 1)) - 1) +#define BIT_VEC64_ELEM_ONE_MASK ((u64)(~0)) + +/*******************************************************/ + +/* Number of u64 elements in SGE mask array */ +#define RX_SGE_MASK_LEN (NUM_RX_SGE / BIT_VEC64_ELEM_SZ) +#define RX_SGE_MASK_LEN_MASK (RX_SGE_MASK_LEN - 1) +#define NEXT_SGE_MASK_ELEM(el) (((el) + 1) & RX_SGE_MASK_LEN_MASK) + +union host_hc_status_block { + /* pointer to fp status block e1x */ + struct host_hc_status_block_e1x *e1x_sb; + /* pointer to fp status block e2 */ + struct host_hc_status_block_e2 *e2_sb; +}; + +struct bnx2x_agg_info { + /* + * First aggregation buffer is a data buffer, the following - are pages. + * We will preallocate the data buffer for each aggregation when + * we open the interface and will replace the BD at the consumer + * with this one when we receive the TPA_START CQE in order to + * keep the Rx BD ring consistent. + */ + struct sw_rx_bd first_buf; + u8 tpa_state; +#define BNX2X_TPA_START 1 +#define BNX2X_TPA_STOP 2 +#define BNX2X_TPA_ERROR 3 + u8 placement_offset; + u16 parsing_flags; + u16 vlan_tag; + u16 len_on_bd; + u32 rxhash; + enum pkt_hash_types rxhash_type; + u16 gro_size; + u16 full_page; +}; + +#define Q_STATS_OFFSET32(stat_name) \ + (offsetof(struct bnx2x_eth_q_stats, stat_name) / 4) + +struct bnx2x_fp_txdata { + + struct sw_tx_bd *tx_buf_ring; + + union eth_tx_bd_types *tx_desc_ring; + dma_addr_t tx_desc_mapping; + + u32 cid; + + union db_prod tx_db; + + u16 tx_pkt_prod; + u16 tx_pkt_cons; + u16 tx_bd_prod; + u16 tx_bd_cons; + + unsigned long tx_pkt; + + __le16 *tx_cons_sb; + + int txq_index; + struct bnx2x_fastpath *parent_fp; + int tx_ring_size; +}; + +enum bnx2x_tpa_mode_t { + TPA_MODE_DISABLED, + TPA_MODE_LRO, + TPA_MODE_GRO +}; + +struct bnx2x_alloc_pool { + struct page *page; + unsigned int offset; +}; + +struct bnx2x_fastpath { + struct bnx2x *bp; /* parent */ + + struct napi_struct napi; + + union host_hc_status_block status_blk; + /* chip independent shortcuts into sb structure */ + __le16 *sb_index_values; + __le16 *sb_running_index; + /* chip independent shortcut into rx_prods_offset memory */ + u32 ustorm_rx_prods_offset; + + u32 rx_buf_size; + u32 rx_frag_size; /* 0 if kmalloced(), or rx_buf_size + NET_SKB_PAD */ + dma_addr_t status_blk_mapping; + + enum bnx2x_tpa_mode_t mode; + + u8 max_cos; /* actual number of active tx coses */ + struct bnx2x_fp_txdata *txdata_ptr[BNX2X_MULTI_TX_COS]; + + struct sw_rx_bd *rx_buf_ring; /* BDs mappings ring */ + struct sw_rx_page *rx_page_ring; /* SGE pages mappings ring */ + + struct eth_rx_bd *rx_desc_ring; + dma_addr_t rx_desc_mapping; + + union eth_rx_cqe *rx_comp_ring; + dma_addr_t rx_comp_mapping; + + /* SGE ring */ + struct eth_rx_sge *rx_sge_ring; + dma_addr_t rx_sge_mapping; + + u64 sge_mask[RX_SGE_MASK_LEN]; + + u32 cid; + + __le16 fp_hc_idx; + + u8 index; /* number in fp array */ + u8 rx_queue; /* index for skb_record */ + u8 cl_id; /* eth client id */ + u8 cl_qzone_id; + u8 fw_sb_id; /* status block number in FW */ + u8 igu_sb_id; /* status block number in HW */ + + u16 rx_bd_prod; + u16 rx_bd_cons; + u16 rx_comp_prod; + u16 rx_comp_cons; + u16 rx_sge_prod; + /* The last maximal completed SGE */ + u16 last_max_sge; + __le16 *rx_cons_sb; + + /* TPA related */ + struct bnx2x_agg_info *tpa_info; +#ifdef BNX2X_STOP_ON_ERROR + u64 tpa_queue_used; +#endif + /* The size is calculated using the following: + sizeof name field from netdev structure + + 4 ('-Xx-' string) + + 4 (for the digits and to make it DWORD aligned) */ +#define FP_NAME_SIZE (sizeof(((struct net_device *)0)->name) + 8) + char name[FP_NAME_SIZE]; + + struct bnx2x_alloc_pool page_pool; +}; + +#define bnx2x_fp(bp, nr, var) ((bp)->fp[(nr)].var) +#define bnx2x_sp_obj(bp, fp) ((bp)->sp_objs[(fp)->index]) +#define bnx2x_fp_stats(bp, fp) (&((bp)->fp_stats[(fp)->index])) +#define bnx2x_fp_qstats(bp, fp) (&((bp)->fp_stats[(fp)->index].eth_q_stats)) + +/* Use 2500 as a mini-jumbo MTU for FCoE */ +#define BNX2X_FCOE_MINI_JUMBO_MTU 2500 + +#define FCOE_IDX_OFFSET 0 + +#define FCOE_IDX(bp) (BNX2X_NUM_NON_CNIC_QUEUES(bp) + \ + FCOE_IDX_OFFSET) +#define bnx2x_fcoe_fp(bp) (&bp->fp[FCOE_IDX(bp)]) +#define bnx2x_fcoe(bp, var) (bnx2x_fcoe_fp(bp)->var) +#define bnx2x_fcoe_inner_sp_obj(bp) (&bp->sp_objs[FCOE_IDX(bp)]) +#define bnx2x_fcoe_sp_obj(bp, var) (bnx2x_fcoe_inner_sp_obj(bp)->var) +#define bnx2x_fcoe_tx(bp, var) (bnx2x_fcoe_fp(bp)-> \ + txdata_ptr[FIRST_TX_COS_INDEX] \ + ->var) + +#define IS_ETH_FP(fp) ((fp)->index < BNX2X_NUM_ETH_QUEUES((fp)->bp)) +#define IS_FCOE_FP(fp) ((fp)->index == FCOE_IDX((fp)->bp)) +#define IS_FCOE_IDX(idx) ((idx) == FCOE_IDX(bp)) + +/* MC hsi */ +#define MAX_FETCH_BD 13 /* HW max BDs per packet */ +#define RX_COPY_THRESH 92 + +#define NUM_TX_RINGS 16 +#define TX_DESC_CNT (BCM_PAGE_SIZE / sizeof(union eth_tx_bd_types)) +#define NEXT_PAGE_TX_DESC_CNT 1 +#define MAX_TX_DESC_CNT (TX_DESC_CNT - NEXT_PAGE_TX_DESC_CNT) +#define NUM_TX_BD (TX_DESC_CNT * NUM_TX_RINGS) +#define MAX_TX_BD (NUM_TX_BD - 1) +#define MAX_TX_AVAIL (MAX_TX_DESC_CNT * NUM_TX_RINGS - 2) +#define NEXT_TX_IDX(x) ((((x) & MAX_TX_DESC_CNT) == \ + (MAX_TX_DESC_CNT - 1)) ? \ + (x) + 1 + NEXT_PAGE_TX_DESC_CNT : \ + (x) + 1) +#define TX_BD(x) ((x) & MAX_TX_BD) +#define TX_BD_POFF(x) ((x) & MAX_TX_DESC_CNT) + +/* number of NEXT_PAGE descriptors may be required during placement */ +#define NEXT_CNT_PER_TX_PKT(bds) \ + (((bds) + MAX_TX_DESC_CNT - 1) / \ + MAX_TX_DESC_CNT * NEXT_PAGE_TX_DESC_CNT) +/* max BDs per tx packet w/o next_pages: + * START_BD - describes packed + * START_BD(splitted) - includes unpaged data segment for GSO + * PARSING_BD - for TSO and CSUM data + * PARSING_BD2 - for encapsulation data + * Frag BDs - describes pages for frags + */ +#define BDS_PER_TX_PKT 4 +#define MAX_BDS_PER_TX_PKT (MAX_SKB_FRAGS + BDS_PER_TX_PKT) +/* max BDs per tx packet including next pages */ +#define MAX_DESC_PER_TX_PKT (MAX_BDS_PER_TX_PKT + \ + NEXT_CNT_PER_TX_PKT(MAX_BDS_PER_TX_PKT)) + +/* The RX BD ring is special, each bd is 8 bytes but the last one is 16 */ +#define NUM_RX_RINGS 8 +#define RX_DESC_CNT (BCM_PAGE_SIZE / sizeof(struct eth_rx_bd)) +#define NEXT_PAGE_RX_DESC_CNT 2 +#define MAX_RX_DESC_CNT (RX_DESC_CNT - NEXT_PAGE_RX_DESC_CNT) +#define RX_DESC_MASK (RX_DESC_CNT - 1) +#define NUM_RX_BD (RX_DESC_CNT * NUM_RX_RINGS) +#define MAX_RX_BD (NUM_RX_BD - 1) +#define MAX_RX_AVAIL (MAX_RX_DESC_CNT * NUM_RX_RINGS - 2) + +/* dropless fc calculations for BDs + * + * Number of BDs should as number of buffers in BRB: + * Low threshold takes into account NEXT_PAGE_RX_DESC_CNT + * "next" elements on each page + */ +#define NUM_BD_REQ BRB_SIZE(bp) +#define NUM_BD_PG_REQ ((NUM_BD_REQ + MAX_RX_DESC_CNT - 1) / \ + MAX_RX_DESC_CNT) +#define BD_TH_LO(bp) (NUM_BD_REQ + \ + NUM_BD_PG_REQ * NEXT_PAGE_RX_DESC_CNT + \ + FW_DROP_LEVEL(bp)) +#define BD_TH_HI(bp) (BD_TH_LO(bp) + DROPLESS_FC_HEADROOM) + +#define MIN_RX_AVAIL ((bp)->dropless_fc ? BD_TH_HI(bp) + 128 : 128) + +#define MIN_RX_SIZE_TPA_HW (CHIP_IS_E1(bp) ? \ + ETH_MIN_RX_CQES_WITH_TPA_E1 : \ + ETH_MIN_RX_CQES_WITH_TPA_E1H_E2) +#define MIN_RX_SIZE_NONTPA_HW ETH_MIN_RX_CQES_WITHOUT_TPA +#define MIN_RX_SIZE_TPA (max_t(u32, MIN_RX_SIZE_TPA_HW, MIN_RX_AVAIL)) +#define MIN_RX_SIZE_NONTPA (max_t(u32, MIN_RX_SIZE_NONTPA_HW,\ + MIN_RX_AVAIL)) + +#define NEXT_RX_IDX(x) ((((x) & RX_DESC_MASK) == \ + (MAX_RX_DESC_CNT - 1)) ? \ + (x) + 1 + NEXT_PAGE_RX_DESC_CNT : \ + (x) + 1) +#define RX_BD(x) ((x) & MAX_RX_BD) + +/* + * As long as CQE is X times bigger than BD entry we have to allocate X times + * more pages for CQ ring in order to keep it balanced with BD ring + */ +#define CQE_BD_REL (sizeof(union eth_rx_cqe) / sizeof(struct eth_rx_bd)) +#define NUM_RCQ_RINGS (NUM_RX_RINGS * CQE_BD_REL) +#define RCQ_DESC_CNT (BCM_PAGE_SIZE / sizeof(union eth_rx_cqe)) +#define NEXT_PAGE_RCQ_DESC_CNT 1 +#define MAX_RCQ_DESC_CNT (RCQ_DESC_CNT - NEXT_PAGE_RCQ_DESC_CNT) +#define NUM_RCQ_BD (RCQ_DESC_CNT * NUM_RCQ_RINGS) +#define MAX_RCQ_BD (NUM_RCQ_BD - 1) +#define MAX_RCQ_AVAIL (MAX_RCQ_DESC_CNT * NUM_RCQ_RINGS - 2) +#define NEXT_RCQ_IDX(x) ((((x) & MAX_RCQ_DESC_CNT) == \ + (MAX_RCQ_DESC_CNT - 1)) ? \ + (x) + 1 + NEXT_PAGE_RCQ_DESC_CNT : \ + (x) + 1) +#define RCQ_BD(x) ((x) & MAX_RCQ_BD) + +/* dropless fc calculations for RCQs + * + * Number of RCQs should be as number of buffers in BRB: + * Low threshold takes into account NEXT_PAGE_RCQ_DESC_CNT + * "next" elements on each page + */ +#define NUM_RCQ_REQ BRB_SIZE(bp) +#define NUM_RCQ_PG_REQ ((NUM_BD_REQ + MAX_RCQ_DESC_CNT - 1) / \ + MAX_RCQ_DESC_CNT) +#define RCQ_TH_LO(bp) (NUM_RCQ_REQ + \ + NUM_RCQ_PG_REQ * NEXT_PAGE_RCQ_DESC_CNT + \ + FW_DROP_LEVEL(bp)) +#define RCQ_TH_HI(bp) (RCQ_TH_LO(bp) + DROPLESS_FC_HEADROOM) + +/* This is needed for determining of last_max */ +#define SUB_S16(a, b) (s16)((s16)(a) - (s16)(b)) +#define SUB_S32(a, b) (s32)((s32)(a) - (s32)(b)) + +#define BNX2X_SWCID_SHIFT 17 +#define BNX2X_SWCID_MASK ((0x1 << BNX2X_SWCID_SHIFT) - 1) + +/* used on a CID received from the HW */ +#define SW_CID(x) (le32_to_cpu(x) & BNX2X_SWCID_MASK) +#define CQE_CMD(x) (le32_to_cpu(x) >> \ + COMMON_RAMROD_ETH_RX_CQE_CMD_ID_SHIFT) + +#define BD_UNMAP_ADDR(bd) HILO_U64(le32_to_cpu((bd)->addr_hi), \ + le32_to_cpu((bd)->addr_lo)) +#define BD_UNMAP_LEN(bd) (le16_to_cpu((bd)->nbytes)) + +#define BNX2X_DB_MIN_SHIFT 3 /* 8 bytes */ +#define BNX2X_DB_SHIFT 3 /* 8 bytes*/ +#if (BNX2X_DB_SHIFT < BNX2X_DB_MIN_SHIFT) +#error "Min DB doorbell stride is 8" +#endif +#define DOORBELL_RELAXED(bp, cid, val) \ + writel_relaxed((u32)(val), (bp)->doorbells + ((bp)->db_size * (cid))) + +/* TX CSUM helpers */ +#define SKB_CS_OFF(skb) (offsetof(struct tcphdr, check) - \ + skb->csum_offset) +#define SKB_CS(skb) (*(u16 *)(skb_transport_header(skb) + \ + skb->csum_offset)) + +#define pbd_tcp_flags(tcp_hdr) (ntohl(tcp_flag_word(tcp_hdr))>>16 & 0xff) + +#define XMIT_PLAIN 0 +#define XMIT_CSUM_V4 (1 << 0) +#define XMIT_CSUM_V6 (1 << 1) +#define XMIT_CSUM_TCP (1 << 2) +#define XMIT_GSO_V4 (1 << 3) +#define XMIT_GSO_V6 (1 << 4) +#define XMIT_CSUM_ENC_V4 (1 << 5) +#define XMIT_CSUM_ENC_V6 (1 << 6) +#define XMIT_GSO_ENC_V4 (1 << 7) +#define XMIT_GSO_ENC_V6 (1 << 8) + +#define XMIT_CSUM_ENC (XMIT_CSUM_ENC_V4 | XMIT_CSUM_ENC_V6) +#define XMIT_GSO_ENC (XMIT_GSO_ENC_V4 | XMIT_GSO_ENC_V6) + +#define XMIT_CSUM (XMIT_CSUM_V4 | XMIT_CSUM_V6 | XMIT_CSUM_ENC) +#define XMIT_GSO (XMIT_GSO_V4 | XMIT_GSO_V6 | XMIT_GSO_ENC) + +/* stuff added to make the code fit 80Col */ +#define CQE_TYPE(cqe_fp_flags) ((cqe_fp_flags) & ETH_FAST_PATH_RX_CQE_TYPE) +#define CQE_TYPE_START(cqe_type) ((cqe_type) == RX_ETH_CQE_TYPE_ETH_START_AGG) +#define CQE_TYPE_STOP(cqe_type) ((cqe_type) == RX_ETH_CQE_TYPE_ETH_STOP_AGG) +#define CQE_TYPE_SLOW(cqe_type) ((cqe_type) == RX_ETH_CQE_TYPE_ETH_RAMROD) +#define CQE_TYPE_FAST(cqe_type) ((cqe_type) == RX_ETH_CQE_TYPE_ETH_FASTPATH) + +#define ETH_RX_ERROR_FALGS ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG + +#define BNX2X_PRS_FLAG_OVERETH_IPV4(flags) \ + (((le16_to_cpu(flags) & \ + PARSING_FLAGS_OVER_ETHERNET_PROTOCOL) >> \ + PARSING_FLAGS_OVER_ETHERNET_PROTOCOL_SHIFT) \ + == PRS_FLAG_OVERETH_IPV4) +#define BNX2X_RX_SUM_FIX(cqe) \ + BNX2X_PRS_FLAG_OVERETH_IPV4(cqe->fast_path_cqe.pars_flags.flags) + +#define FP_USB_FUNC_OFF \ + offsetof(struct cstorm_status_block_u, func) +#define FP_CSB_FUNC_OFF \ + offsetof(struct cstorm_status_block_c, func) + +#define HC_INDEX_ETH_RX_CQ_CONS 1 + +#define HC_INDEX_OOO_TX_CQ_CONS 4 + +#define HC_INDEX_ETH_TX_CQ_CONS_COS0 5 + +#define HC_INDEX_ETH_TX_CQ_CONS_COS1 6 + +#define HC_INDEX_ETH_TX_CQ_CONS_COS2 7 + +#define HC_INDEX_ETH_FIRST_TX_CQ_CONS HC_INDEX_ETH_TX_CQ_CONS_COS0 + +#define BNX2X_RX_SB_INDEX \ + (&fp->sb_index_values[HC_INDEX_ETH_RX_CQ_CONS]) + +#define BNX2X_TX_SB_INDEX_BASE BNX2X_TX_SB_INDEX_COS0 + +#define BNX2X_TX_SB_INDEX_COS0 \ + (&fp->sb_index_values[HC_INDEX_ETH_TX_CQ_CONS_COS0]) + +/* end of fast path */ + +/* common */ + +struct bnx2x_common { + + u32 chip_id; +/* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */ +#define CHIP_ID(bp) (bp->common.chip_id & 0xfffffff0) + +#define CHIP_NUM(bp) (bp->common.chip_id >> 16) +#define CHIP_NUM_57710 0x164e +#define CHIP_NUM_57711 0x164f +#define CHIP_NUM_57711E 0x1650 +#define CHIP_NUM_57712 0x1662 +#define CHIP_NUM_57712_MF 0x1663 +#define CHIP_NUM_57712_VF 0x166f +#define CHIP_NUM_57713 0x1651 +#define CHIP_NUM_57713E 0x1652 +#define CHIP_NUM_57800 0x168a +#define CHIP_NUM_57800_MF 0x16a5 +#define CHIP_NUM_57800_VF 0x16a9 +#define CHIP_NUM_57810 0x168e +#define CHIP_NUM_57810_MF 0x16ae +#define CHIP_NUM_57810_VF 0x16af +#define CHIP_NUM_57811 0x163d +#define CHIP_NUM_57811_MF 0x163e +#define CHIP_NUM_57811_VF 0x163f +#define CHIP_NUM_57840_OBSOLETE 0x168d +#define CHIP_NUM_57840_MF_OBSOLETE 0x16ab +#define CHIP_NUM_57840_4_10 0x16a1 +#define CHIP_NUM_57840_2_20 0x16a2 +#define CHIP_NUM_57840_MF 0x16a4 +#define CHIP_NUM_57840_VF 0x16ad +#define CHIP_IS_E1(bp) (CHIP_NUM(bp) == CHIP_NUM_57710) +#define CHIP_IS_57711(bp) (CHIP_NUM(bp) == CHIP_NUM_57711) +#define CHIP_IS_57711E(bp) (CHIP_NUM(bp) == CHIP_NUM_57711E) +#define CHIP_IS_57712(bp) (CHIP_NUM(bp) == CHIP_NUM_57712) +#define CHIP_IS_57712_VF(bp) (CHIP_NUM(bp) == CHIP_NUM_57712_VF) +#define CHIP_IS_57712_MF(bp) (CHIP_NUM(bp) == CHIP_NUM_57712_MF) +#define CHIP_IS_57800(bp) (CHIP_NUM(bp) == CHIP_NUM_57800) +#define CHIP_IS_57800_MF(bp) (CHIP_NUM(bp) == CHIP_NUM_57800_MF) +#define CHIP_IS_57800_VF(bp) (CHIP_NUM(bp) == CHIP_NUM_57800_VF) +#define CHIP_IS_57810(bp) (CHIP_NUM(bp) == CHIP_NUM_57810) +#define CHIP_IS_57810_MF(bp) (CHIP_NUM(bp) == CHIP_NUM_57810_MF) +#define CHIP_IS_57810_VF(bp) (CHIP_NUM(bp) == CHIP_NUM_57810_VF) +#define CHIP_IS_57811(bp) (CHIP_NUM(bp) == CHIP_NUM_57811) +#define CHIP_IS_57811_MF(bp) (CHIP_NUM(bp) == CHIP_NUM_57811_MF) +#define CHIP_IS_57811_VF(bp) (CHIP_NUM(bp) == CHIP_NUM_57811_VF) +#define CHIP_IS_57840(bp) \ + ((CHIP_NUM(bp) == CHIP_NUM_57840_4_10) || \ + (CHIP_NUM(bp) == CHIP_NUM_57840_2_20) || \ + (CHIP_NUM(bp) == CHIP_NUM_57840_OBSOLETE)) +#define CHIP_IS_57840_MF(bp) ((CHIP_NUM(bp) == CHIP_NUM_57840_MF) || \ + (CHIP_NUM(bp) == CHIP_NUM_57840_MF_OBSOLETE)) +#define CHIP_IS_57840_VF(bp) (CHIP_NUM(bp) == CHIP_NUM_57840_VF) +#define CHIP_IS_E1H(bp) (CHIP_IS_57711(bp) || \ + CHIP_IS_57711E(bp)) +#define CHIP_IS_57811xx(bp) (CHIP_IS_57811(bp) || \ + CHIP_IS_57811_MF(bp) || \ + CHIP_IS_57811_VF(bp)) +#define CHIP_IS_E2(bp) (CHIP_IS_57712(bp) || \ + CHIP_IS_57712_MF(bp) || \ + CHIP_IS_57712_VF(bp)) +#define CHIP_IS_E3(bp) (CHIP_IS_57800(bp) || \ + CHIP_IS_57800_MF(bp) || \ + CHIP_IS_57800_VF(bp) || \ + CHIP_IS_57810(bp) || \ + CHIP_IS_57810_MF(bp) || \ + CHIP_IS_57810_VF(bp) || \ + CHIP_IS_57811xx(bp) || \ + CHIP_IS_57840(bp) || \ + CHIP_IS_57840_MF(bp) || \ + CHIP_IS_57840_VF(bp)) +#define CHIP_IS_E1x(bp) (CHIP_IS_E1((bp)) || CHIP_IS_E1H((bp))) +#define USES_WARPCORE(bp) (CHIP_IS_E3(bp)) +#define IS_E1H_OFFSET (!CHIP_IS_E1(bp)) + +#define CHIP_REV_SHIFT 12 +#define CHIP_REV_MASK (0xF << CHIP_REV_SHIFT) +#define CHIP_REV_VAL(bp) (bp->common.chip_id & CHIP_REV_MASK) +#define CHIP_REV_Ax (0x0 << CHIP_REV_SHIFT) +#define CHIP_REV_Bx (0x1 << CHIP_REV_SHIFT) +/* assume maximum 5 revisions */ +#define CHIP_REV_IS_SLOW(bp) (CHIP_REV_VAL(bp) > 0x00005000) +/* Emul versions are A=>0xe, B=>0xc, C=>0xa, D=>8, E=>6 */ +#define CHIP_REV_IS_EMUL(bp) ((CHIP_REV_IS_SLOW(bp)) && \ + !(CHIP_REV_VAL(bp) & 0x00001000)) +/* FPGA versions are A=>0xf, B=>0xd, C=>0xb, D=>9, E=>7 */ +#define CHIP_REV_IS_FPGA(bp) ((CHIP_REV_IS_SLOW(bp)) && \ + (CHIP_REV_VAL(bp) & 0x00001000)) + +#define CHIP_TIME(bp) ((CHIP_REV_IS_EMUL(bp)) ? 2000 : \ + ((CHIP_REV_IS_FPGA(bp)) ? 200 : 1)) + +#define CHIP_METAL(bp) (bp->common.chip_id & 0x00000ff0) +#define CHIP_BOND_ID(bp) (bp->common.chip_id & 0x0000000f) +#define CHIP_REV_SIM(bp) (((CHIP_REV_MASK - CHIP_REV_VAL(bp)) >>\ + (CHIP_REV_SHIFT + 1)) \ + << CHIP_REV_SHIFT) +#define CHIP_REV(bp) (CHIP_REV_IS_SLOW(bp) ? \ + CHIP_REV_SIM(bp) :\ + CHIP_REV_VAL(bp)) +#define CHIP_IS_E3B0(bp) (CHIP_IS_E3(bp) && \ + (CHIP_REV(bp) == CHIP_REV_Bx)) +#define CHIP_IS_E3A0(bp) (CHIP_IS_E3(bp) && \ + (CHIP_REV(bp) == CHIP_REV_Ax)) +/* This define is used in two main places: + * 1. In the early stages of nic_load, to know if to configure Parser / Searcher + * to nic-only mode or to offload mode. Offload mode is configured if either the + * chip is E1x (where MIC_MODE register is not applicable), or if cnic already + * registered for this port (which means that the user wants storage services). + * 2. During cnic-related load, to know if offload mode is already configured in + * the HW or needs to be configured. + * Since the transition from nic-mode to offload-mode in HW causes traffic + * corruption, nic-mode is configured only in ports on which storage services + * where never requested. + */ +#define CONFIGURE_NIC_MODE(bp) (!CHIP_IS_E1x(bp) && !CNIC_ENABLED(bp)) + + int flash_size; +#define BNX2X_NVRAM_1MB_SIZE 0x20000 /* 1M bit in bytes */ +#define BNX2X_NVRAM_TIMEOUT_COUNT 30000 +#define BNX2X_NVRAM_PAGE_SIZE 256 + + u32 shmem_base; + u32 shmem2_base; + u32 mf_cfg_base; + u32 mf2_cfg_base; + + u32 hw_config; + + u32 bc_ver; + + u8 int_block; +#define INT_BLOCK_HC 0 +#define INT_BLOCK_IGU 1 +#define INT_BLOCK_MODE_NORMAL 0 +#define INT_BLOCK_MODE_BW_COMP 2 +#define CHIP_INT_MODE_IS_NBC(bp) \ + (!CHIP_IS_E1x(bp) && \ + !((bp)->common.int_block & INT_BLOCK_MODE_BW_COMP)) +#define CHIP_INT_MODE_IS_BC(bp) (!CHIP_INT_MODE_IS_NBC(bp)) + + u8 chip_port_mode; +#define CHIP_4_PORT_MODE 0x0 +#define CHIP_2_PORT_MODE 0x1 +#define CHIP_PORT_MODE_NONE 0x2 +#define CHIP_MODE(bp) (bp->common.chip_port_mode) +#define CHIP_MODE_IS_4_PORT(bp) (CHIP_MODE(bp) == CHIP_4_PORT_MODE) + + u32 boot_mode; +}; + +/* IGU MSIX STATISTICS on 57712: 64 for VFs; 4 for PFs; 4 for Attentions */ +#define BNX2X_IGU_STAS_MSG_VF_CNT 64 +#define BNX2X_IGU_STAS_MSG_PF_CNT 4 + +#define MAX_IGU_ATTN_ACK_TO 100 +/* end of common */ + +/* port */ + +struct bnx2x_port { + u32 pmf; + + u32 link_config[LINK_CONFIG_SIZE]; + + u32 supported[LINK_CONFIG_SIZE]; + + u32 advertising[LINK_CONFIG_SIZE]; + + u32 phy_addr; + + /* used to synchronize phy accesses */ + struct mutex phy_mutex; + + u32 port_stx; + + struct nig_stats old_nig_stats; +}; + +/* end of port */ + +#define STATS_OFFSET32(stat_name) \ + (offsetof(struct bnx2x_eth_stats, stat_name) / 4) + +/* slow path */ +#define BNX2X_MAX_NUM_OF_VFS 64 +#define BNX2X_VF_CID_WND 4 /* log num of queues per VF. HW config. */ +#define BNX2X_CIDS_PER_VF (1 << BNX2X_VF_CID_WND) + +/* We need to reserve doorbell addresses for all VF and queue combinations */ +#define BNX2X_VF_CIDS (BNX2X_MAX_NUM_OF_VFS * BNX2X_CIDS_PER_VF) + +/* The doorbell is configured to have the same number of CIDs for PFs and for + * VFs. For this reason the PF CID zone is as large as the VF zone. + */ +#define BNX2X_FIRST_VF_CID BNX2X_VF_CIDS +#define BNX2X_MAX_NUM_VF_QUEUES 64 +#define BNX2X_VF_ID_INVALID 0xFF + +/* the number of VF CIDS multiplied by the amount of bytes reserved for each + * cid must not exceed the size of the VF doorbell + */ +#define BNX2X_VF_BAR_SIZE 512 +#if (BNX2X_VF_BAR_SIZE < BNX2X_CIDS_PER_VF * (1 << BNX2X_DB_SHIFT)) +#error "VF doorbell bar size is 512" +#endif + +/* + * The total number of L2 queues, MSIX vectors and HW contexts (CIDs) is + * control by the number of fast-path status blocks supported by the + * device (HW/FW). Each fast-path status block (FP-SB) aka non-default + * status block represents an independent interrupts context that can + * serve a regular L2 networking queue. However special L2 queues such + * as the FCoE queue do not require a FP-SB and other components like + * the CNIC may consume FP-SB reducing the number of possible L2 queues + * + * If the maximum number of FP-SB available is X then: + * a. If CNIC is supported it consumes 1 FP-SB thus the max number of + * regular L2 queues is Y=X-1 + * b. In MF mode the actual number of L2 queues is Y= (X-1/MF_factor) + * c. If the FCoE L2 queue is supported the actual number of L2 queues + * is Y+1 + * d. The number of irqs (MSIX vectors) is either Y+1 (one extra for + * slow-path interrupts) or Y+2 if CNIC is supported (one additional + * FP interrupt context for the CNIC). + * e. The number of HW context (CID count) is always X or X+1 if FCoE + * L2 queue is supported. The cid for the FCoE L2 queue is always X. + */ + +/* fast-path interrupt contexts E1x */ +#define FP_SB_MAX_E1x 16 +/* fast-path interrupt contexts E2 */ +#define FP_SB_MAX_E2 HC_SB_MAX_SB_E2 + +union cdu_context { + struct eth_context eth; + char pad[1024]; +}; + +/* CDU host DB constants */ +#define CDU_ILT_PAGE_SZ_HW 2 +#define CDU_ILT_PAGE_SZ (8192 << CDU_ILT_PAGE_SZ_HW) /* 32K */ +#define ILT_PAGE_CIDS (CDU_ILT_PAGE_SZ / sizeof(union cdu_context)) + +#define CNIC_ISCSI_CID_MAX 256 +#define CNIC_FCOE_CID_MAX 2048 +#define CNIC_CID_MAX (CNIC_ISCSI_CID_MAX + CNIC_FCOE_CID_MAX) +#define CNIC_ILT_LINES DIV_ROUND_UP(CNIC_CID_MAX, ILT_PAGE_CIDS) + +#define QM_ILT_PAGE_SZ_HW 0 +#define QM_ILT_PAGE_SZ (4096 << QM_ILT_PAGE_SZ_HW) /* 4K */ +#define QM_CID_ROUND 1024 + +/* TM (timers) host DB constants */ +#define TM_ILT_PAGE_SZ_HW 0 +#define TM_ILT_PAGE_SZ (4096 << TM_ILT_PAGE_SZ_HW) /* 4K */ +#define TM_CONN_NUM (BNX2X_FIRST_VF_CID + \ + BNX2X_VF_CIDS + \ + CNIC_ISCSI_CID_MAX) +#define TM_ILT_SZ (8 * TM_CONN_NUM) +#define TM_ILT_LINES DIV_ROUND_UP(TM_ILT_SZ, TM_ILT_PAGE_SZ) + +/* SRC (Searcher) host DB constants */ +#define SRC_ILT_PAGE_SZ_HW 0 +#define SRC_ILT_PAGE_SZ (4096 << SRC_ILT_PAGE_SZ_HW) /* 4K */ +#define SRC_HASH_BITS 10 +#define SRC_CONN_NUM (1 << SRC_HASH_BITS) /* 1024 */ +#define SRC_ILT_SZ (sizeof(struct src_ent) * SRC_CONN_NUM) +#define SRC_T2_SZ SRC_ILT_SZ +#define SRC_ILT_LINES DIV_ROUND_UP(SRC_ILT_SZ, SRC_ILT_PAGE_SZ) + +#define MAX_DMAE_C 8 + +/* DMA memory not used in fastpath */ +struct bnx2x_slowpath { + union { + struct mac_configuration_cmd e1x; + struct eth_classify_rules_ramrod_data e2; + } mac_rdata; + + union { + struct eth_classify_rules_ramrod_data e2; + } vlan_rdata; + + union { + struct tstorm_eth_mac_filter_config e1x; + struct eth_filter_rules_ramrod_data e2; + } rx_mode_rdata; + + union { + struct mac_configuration_cmd e1; + struct eth_multicast_rules_ramrod_data e2; + } mcast_rdata; + + struct eth_rss_update_ramrod_data rss_rdata; + + /* Queue State related ramrods are always sent under rtnl_lock */ + union { + struct client_init_ramrod_data init_data; + struct client_update_ramrod_data update_data; + struct tpa_update_ramrod_data tpa_data; + } q_rdata; + + union { + struct function_start_data func_start; + /* pfc configuration for DCBX ramrod */ + struct flow_control_configuration pfc_config; + } func_rdata; + + /* afex ramrod can not be a part of func_rdata union because these + * events might arrive in parallel to other events from func_rdata. + * Therefore, if they would have been defined in the same union, + * data can get corrupted. + */ + union { + struct afex_vif_list_ramrod_data viflist_data; + struct function_update_data func_update; + } func_afex_rdata; + + /* used by dmae command executer */ + struct dmae_command dmae[MAX_DMAE_C]; + + u32 stats_comp; + union mac_stats mac_stats; + struct nig_stats nig_stats; + struct host_port_stats port_stats; + struct host_func_stats func_stats; + + u32 wb_comp; + u32 wb_data[4]; + + union drv_info_to_mcp drv_info_to_mcp; +}; + +#define bnx2x_sp(bp, var) (&bp->slowpath->var) +#define bnx2x_sp_mapping(bp, var) \ + (bp->slowpath_mapping + offsetof(struct bnx2x_slowpath, var)) + +/* attn group wiring */ +#define MAX_DYNAMIC_ATTN_GRPS 8 + +struct attn_route { + u32 sig[5]; +}; + +struct iro { + u32 base; + u16 m1; + u16 m2; + u16 m3; + u16 size; +}; + +struct hw_context { + union cdu_context *vcxt; + dma_addr_t cxt_mapping; + size_t size; +}; + +/* forward */ +struct bnx2x_ilt; + +struct bnx2x_vfdb; + +enum bnx2x_recovery_state { + BNX2X_RECOVERY_DONE, + BNX2X_RECOVERY_INIT, + BNX2X_RECOVERY_WAIT, + BNX2X_RECOVERY_FAILED, + BNX2X_RECOVERY_NIC_LOADING +}; + +/* + * Event queue (EQ or event ring) MC hsi + * NUM_EQ_PAGES and EQ_DESC_CNT_PAGE must be power of 2 + */ +#define NUM_EQ_PAGES 1 +#define EQ_DESC_CNT_PAGE (BCM_PAGE_SIZE / sizeof(union event_ring_elem)) +#define EQ_DESC_MAX_PAGE (EQ_DESC_CNT_PAGE - 1) +#define NUM_EQ_DESC (EQ_DESC_CNT_PAGE * NUM_EQ_PAGES) +#define EQ_DESC_MASK (NUM_EQ_DESC - 1) +#define MAX_EQ_AVAIL (EQ_DESC_MAX_PAGE * NUM_EQ_PAGES - 2) + +/* depends on EQ_DESC_CNT_PAGE being a power of 2 */ +#define NEXT_EQ_IDX(x) ((((x) & EQ_DESC_MAX_PAGE) == \ + (EQ_DESC_MAX_PAGE - 1)) ? (x) + 2 : (x) + 1) + +/* depends on the above and on NUM_EQ_PAGES being a power of 2 */ +#define EQ_DESC(x) ((x) & EQ_DESC_MASK) + +#define BNX2X_EQ_INDEX \ + (&bp->def_status_blk->sp_sb.\ + index_values[HC_SP_INDEX_EQ_CONS]) + +/* This is a data that will be used to create a link report message. + * We will keep the data used for the last link report in order + * to prevent reporting the same link parameters twice. + */ +struct bnx2x_link_report_data { + u16 line_speed; /* Effective line speed */ + unsigned long link_report_flags;/* BNX2X_LINK_REPORT_XXX flags */ +}; + +enum { + BNX2X_LINK_REPORT_FD, /* Full DUPLEX */ + BNX2X_LINK_REPORT_LINK_DOWN, + BNX2X_LINK_REPORT_RX_FC_ON, + BNX2X_LINK_REPORT_TX_FC_ON, +}; + +enum { + BNX2X_PORT_QUERY_IDX, + BNX2X_PF_QUERY_IDX, + BNX2X_FCOE_QUERY_IDX, + BNX2X_FIRST_QUEUE_QUERY_IDX, +}; + +struct bnx2x_fw_stats_req { + struct stats_query_header hdr; + struct stats_query_entry query[FP_SB_MAX_E1x+ + BNX2X_FIRST_QUEUE_QUERY_IDX]; +}; + +struct bnx2x_fw_stats_data { + struct stats_counter storm_counters; + struct per_port_stats port; + struct per_pf_stats pf; + struct fcoe_statistics_params fcoe; + struct per_queue_stats queue_stats[]; +}; + +/* Public slow path states */ +enum sp_rtnl_flag { + BNX2X_SP_RTNL_SETUP_TC, + BNX2X_SP_RTNL_TX_TIMEOUT, + BNX2X_SP_RTNL_FAN_FAILURE, + BNX2X_SP_RTNL_AFEX_F_UPDATE, + BNX2X_SP_RTNL_ENABLE_SRIOV, + BNX2X_SP_RTNL_VFPF_MCAST, + BNX2X_SP_RTNL_VFPF_CHANNEL_DOWN, + BNX2X_SP_RTNL_RX_MODE, + BNX2X_SP_RTNL_HYPERVISOR_VLAN, + BNX2X_SP_RTNL_TX_STOP, + BNX2X_SP_RTNL_GET_DRV_VERSION, + BNX2X_SP_RTNL_UPDATE_SVID, +}; + +enum bnx2x_iov_flag { + BNX2X_IOV_HANDLE_VF_MSG, + BNX2X_IOV_HANDLE_FLR, +}; + +struct bnx2x_prev_path_list { + struct list_head list; + u8 bus; + u8 slot; + u8 path; + u8 aer; + u8 undi; +}; + +struct bnx2x_sp_objs { + /* MACs object */ + struct bnx2x_vlan_mac_obj mac_obj; + + /* Queue State object */ + struct bnx2x_queue_sp_obj q_obj; + + /* VLANs object */ + struct bnx2x_vlan_mac_obj vlan_obj; +}; + +struct bnx2x_fp_stats { + struct tstorm_per_queue_stats old_tclient; + struct ustorm_per_queue_stats old_uclient; + struct xstorm_per_queue_stats old_xclient; + struct bnx2x_eth_q_stats eth_q_stats; + struct bnx2x_eth_q_stats_old eth_q_stats_old; +}; + +enum { + SUB_MF_MODE_UNKNOWN = 0, + SUB_MF_MODE_UFP, + SUB_MF_MODE_NPAR1_DOT_5, + SUB_MF_MODE_BD, +}; + +struct bnx2x_vlan_entry { + struct list_head link; + u16 vid; + bool hw; +}; + +enum bnx2x_udp_port_type { + BNX2X_UDP_PORT_VXLAN, + BNX2X_UDP_PORT_GENEVE, + BNX2X_UDP_PORT_MAX, +}; + +struct bnx2x { + /* Fields used in the tx and intr/napi performance paths + * are grouped together in the beginning of the structure + */ + struct bnx2x_fastpath *fp; + struct bnx2x_sp_objs *sp_objs; + struct bnx2x_fp_stats *fp_stats; + struct bnx2x_fp_txdata *bnx2x_txq; + void __iomem *regview; + void __iomem *doorbells; + u16 db_size; + + u8 pf_num; /* absolute PF number */ + u8 pfid; /* per-path PF number */ + int base_fw_ndsb; /**/ +#define BP_PATH(bp) (CHIP_IS_E1x(bp) ? 0 : (bp->pf_num & 1)) +#define BP_PORT(bp) (bp->pfid & 1) +#define BP_FUNC(bp) (bp->pfid) +#define BP_ABS_FUNC(bp) (bp->pf_num) +#define BP_VN(bp) ((bp)->pfid >> 1) +#define BP_MAX_VN_NUM(bp) (CHIP_MODE_IS_4_PORT(bp) ? 2 : 4) +#define BP_L_ID(bp) (BP_VN(bp) << 2) +#define BP_FW_MB_IDX_VN(bp, vn) (BP_PORT(bp) +\ + (vn) * ((CHIP_IS_E1x(bp) || (CHIP_MODE_IS_4_PORT(bp))) ? 2 : 1)) +#define BP_FW_MB_IDX(bp) BP_FW_MB_IDX_VN(bp, BP_VN(bp)) + +#ifdef CONFIG_BNX2X_SRIOV + /* protects vf2pf mailbox from simultaneous access */ + struct mutex vf2pf_mutex; + /* vf pf channel mailbox contains request and response buffers */ + struct bnx2x_vf_mbx_msg *vf2pf_mbox; + dma_addr_t vf2pf_mbox_mapping; + + /* we set aside a copy of the acquire response */ + struct pfvf_acquire_resp_tlv acquire_resp; + + /* bulletin board for messages from pf to vf */ + union pf_vf_bulletin *pf2vf_bulletin; + dma_addr_t pf2vf_bulletin_mapping; + + union pf_vf_bulletin shadow_bulletin; + struct pf_vf_bulletin_content old_bulletin; + + u16 requested_nr_virtfn; +#endif /* CONFIG_BNX2X_SRIOV */ + + struct net_device *dev; + struct pci_dev *pdev; + + const struct iro *iro_arr; +#define IRO (bp->iro_arr) + + enum bnx2x_recovery_state recovery_state; + int is_leader; + struct msix_entry *msix_table; + + int tx_ring_size; + +/* L2 header size + 2*VLANs (8 bytes) + LLC SNAP (8 bytes) */ +#define ETH_OVERHEAD (ETH_HLEN + 8 + 8) +#define ETH_MIN_PACKET_SIZE (ETH_ZLEN - ETH_HLEN) +#define ETH_MAX_PACKET_SIZE ETH_DATA_LEN +#define ETH_MAX_JUMBO_PACKET_SIZE 9600 +/* TCP with Timestamp Option (32) + IPv6 (40) */ +#define ETH_MAX_TPA_HEADER_SIZE 72 + + /* Max supported alignment is 256 (8 shift) + * minimal alignment shift 6 is optimal for 57xxx HW performance + */ +#define BNX2X_RX_ALIGN_SHIFT max(6, min(8, L1_CACHE_SHIFT)) + + /* FW uses 2 Cache lines Alignment for start packet and size + * + * We assume skb_build() uses sizeof(struct skb_shared_info) bytes + * at the end of skb->data, to avoid wasting a full cache line. + * This reduces memory use (skb->truesize). + */ +#define BNX2X_FW_RX_ALIGN_START (1UL << BNX2X_RX_ALIGN_SHIFT) + +#define BNX2X_FW_RX_ALIGN_END \ + max_t(u64, 1UL << BNX2X_RX_ALIGN_SHIFT, \ + SKB_DATA_ALIGN(sizeof(struct skb_shared_info))) + +#define BNX2X_PXP_DRAM_ALIGN (BNX2X_RX_ALIGN_SHIFT - 5) + + struct host_sp_status_block *def_status_blk; +#define DEF_SB_IGU_ID 16 +#define DEF_SB_ID HC_SP_SB_ID + __le16 def_idx; + __le16 def_att_idx; + u32 attn_state; + struct attn_route attn_group[MAX_DYNAMIC_ATTN_GRPS]; + + /* slow path ring */ + struct eth_spe *spq; + dma_addr_t spq_mapping; + u16 spq_prod_idx; + struct eth_spe *spq_prod_bd; + struct eth_spe *spq_last_bd; + __le16 *dsb_sp_prod; + atomic_t cq_spq_left; /* ETH_XXX ramrods credit */ + /* used to synchronize spq accesses */ + spinlock_t spq_lock; + + /* event queue */ + union event_ring_elem *eq_ring; + dma_addr_t eq_mapping; + u16 eq_prod; + u16 eq_cons; + __le16 *eq_cons_sb; + atomic_t eq_spq_left; /* COMMON_XXX ramrods credit */ + + /* Counter for marking that there is a STAT_QUERY ramrod pending */ + u16 stats_pending; + /* Counter for completed statistics ramrods */ + u16 stats_comp; + + /* End of fields used in the performance code paths */ + + int panic; + int msg_enable; + + u32 flags; +#define PCIX_FLAG (1 << 0) +#define PCI_32BIT_FLAG (1 << 1) +#define ONE_PORT_FLAG (1 << 2) +#define NO_WOL_FLAG (1 << 3) +#define USING_MSIX_FLAG (1 << 5) +#define USING_MSI_FLAG (1 << 6) +#define DISABLE_MSI_FLAG (1 << 7) +#define NO_MCP_FLAG (1 << 9) +#define MF_FUNC_DIS (1 << 11) +#define OWN_CNIC_IRQ (1 << 12) +#define NO_ISCSI_OOO_FLAG (1 << 13) +#define NO_ISCSI_FLAG (1 << 14) +#define NO_FCOE_FLAG (1 << 15) +#define BC_SUPPORTS_PFC_STATS (1 << 17) +#define TX_SWITCHING (1 << 18) +#define BC_SUPPORTS_FCOE_FEATURES (1 << 19) +#define USING_SINGLE_MSIX_FLAG (1 << 20) +#define BC_SUPPORTS_DCBX_MSG_NON_PMF (1 << 21) +#define IS_VF_FLAG (1 << 22) +#define BC_SUPPORTS_RMMOD_CMD (1 << 23) +#define HAS_PHYS_PORT_ID (1 << 24) +#define AER_ENABLED (1 << 25) +#define PTP_SUPPORTED (1 << 26) +#define TX_TIMESTAMPING_EN (1 << 27) + +#define BP_NOMCP(bp) ((bp)->flags & NO_MCP_FLAG) + +#ifdef CONFIG_BNX2X_SRIOV +#define IS_VF(bp) ((bp)->flags & IS_VF_FLAG) +#define IS_PF(bp) (!((bp)->flags & IS_VF_FLAG)) +#else +#define IS_VF(bp) false +#define IS_PF(bp) true +#endif + +#define NO_ISCSI(bp) ((bp)->flags & NO_ISCSI_FLAG) +#define NO_ISCSI_OOO(bp) ((bp)->flags & NO_ISCSI_OOO_FLAG) +#define NO_FCOE(bp) ((bp)->flags & NO_FCOE_FLAG) + + u8 cnic_support; + bool cnic_enabled; + bool cnic_loaded; + struct cnic_eth_dev *(*cnic_probe)(struct net_device *); + + /* Flag that indicates that we can start looking for FCoE L2 queue + * completions in the default status block. + */ + bool fcoe_init; + + int mrrs; + + struct delayed_work sp_task; + struct delayed_work iov_task; + + atomic_t interrupt_occurred; + struct delayed_work sp_rtnl_task; + + struct delayed_work period_task; + struct timer_list timer; + int current_interval; + + u16 fw_seq; + u16 fw_drv_pulse_wr_seq; + u32 func_stx; + + struct link_params link_params; + struct link_vars link_vars; + u32 link_cnt; + struct bnx2x_link_report_data last_reported_link; + bool force_link_down; + + struct mdio_if_info mdio; + + struct bnx2x_common common; + struct bnx2x_port port; + + struct cmng_init cmng; + + u32 mf_config[E1HVN_MAX]; + u32 mf_ext_config; + u32 path_has_ovlan; /* E3 */ + u16 mf_ov; + u8 mf_mode; +#define IS_MF(bp) (bp->mf_mode != 0) +#define IS_MF_SI(bp) (bp->mf_mode == MULTI_FUNCTION_SI) +#define IS_MF_SD(bp) (bp->mf_mode == MULTI_FUNCTION_SD) +#define IS_MF_AFEX(bp) (bp->mf_mode == MULTI_FUNCTION_AFEX) + u8 mf_sub_mode; +#define IS_MF_UFP(bp) (IS_MF_SD(bp) && \ + bp->mf_sub_mode == SUB_MF_MODE_UFP) +#define IS_MF_BD(bp) (IS_MF_SD(bp) && \ + bp->mf_sub_mode == SUB_MF_MODE_BD) + + u8 wol; + + int rx_ring_size; + + u16 tx_quick_cons_trip_int; + u16 tx_quick_cons_trip; + u16 tx_ticks_int; + u16 tx_ticks; + + u16 rx_quick_cons_trip_int; + u16 rx_quick_cons_trip; + u16 rx_ticks_int; + u16 rx_ticks; +/* Maximal coalescing timeout in us */ +#define BNX2X_MAX_COALESCE_TOUT (0xff*BNX2X_BTR) + + u32 lin_cnt; + + u16 state; +#define BNX2X_STATE_CLOSED 0 +#define BNX2X_STATE_OPENING_WAIT4_LOAD 0x1000 +#define BNX2X_STATE_OPENING_WAIT4_PORT 0x2000 +#define BNX2X_STATE_OPEN 0x3000 +#define BNX2X_STATE_CLOSING_WAIT4_HALT 0x4000 +#define BNX2X_STATE_CLOSING_WAIT4_DELETE 0x5000 + +#define BNX2X_STATE_DIAG 0xe000 +#define BNX2X_STATE_ERROR 0xf000 + +#define BNX2X_MAX_PRIORITY 8 + int num_queues; + uint num_ethernet_queues; + uint num_cnic_queues; + int disable_tpa; + + u32 rx_mode; +#define BNX2X_RX_MODE_NONE 0 +#define BNX2X_RX_MODE_NORMAL 1 +#define BNX2X_RX_MODE_ALLMULTI 2 +#define BNX2X_RX_MODE_PROMISC 3 +#define BNX2X_MAX_MULTICAST 64 + + u8 igu_dsb_id; + u8 igu_base_sb; + u8 igu_sb_cnt; + u8 min_msix_vec_cnt; + + u32 igu_base_addr; + dma_addr_t def_status_blk_mapping; + + struct bnx2x_slowpath *slowpath; + dma_addr_t slowpath_mapping; + + /* Mechanism protecting the drv_info_to_mcp */ + struct mutex drv_info_mutex; + bool drv_info_mng_owner; + + /* Total number of FW statistics requests */ + u8 fw_stats_num; + + /* + * This is a memory buffer that will contain both statistics + * ramrod request and data. + */ + void *fw_stats; + dma_addr_t fw_stats_mapping; + + /* + * FW statistics request shortcut (points at the + * beginning of fw_stats buffer). + */ + struct bnx2x_fw_stats_req *fw_stats_req; + dma_addr_t fw_stats_req_mapping; + int fw_stats_req_sz; + + /* + * FW statistics data shortcut (points at the beginning of + * fw_stats buffer + fw_stats_req_sz). + */ + struct bnx2x_fw_stats_data *fw_stats_data; + dma_addr_t fw_stats_data_mapping; + int fw_stats_data_sz; + + /* For max 1024 cids (VF RSS), 32KB ILT page size and 1KB + * context size we need 8 ILT entries. + */ +#define ILT_MAX_L2_LINES 32 + struct hw_context context[ILT_MAX_L2_LINES]; + + struct bnx2x_ilt *ilt; +#define BP_ILT(bp) ((bp)->ilt) +#define ILT_MAX_LINES 256 +/* + * Maximum supported number of RSS queues: number of IGU SBs minus one that goes + * to CNIC. + */ +#define BNX2X_MAX_RSS_COUNT(bp) ((bp)->igu_sb_cnt - CNIC_SUPPORT(bp)) + +/* + * Maximum CID count that might be required by the bnx2x: + * Max RSS * Max_Tx_Multi_Cos + FCoE + iSCSI + */ + +#define BNX2X_L2_CID_COUNT(bp) (BNX2X_NUM_ETH_QUEUES(bp) * BNX2X_MULTI_TX_COS \ + + CNIC_SUPPORT(bp) * (2 + UIO_CID_PAD(bp))) +#define BNX2X_L2_MAX_CID(bp) (BNX2X_MAX_RSS_COUNT(bp) * BNX2X_MULTI_TX_COS \ + + CNIC_SUPPORT(bp) * (2 + UIO_CID_PAD(bp))) +#define L2_ILT_LINES(bp) (DIV_ROUND_UP(BNX2X_L2_CID_COUNT(bp),\ + ILT_PAGE_CIDS)) + + int qm_cid_count; + + bool dropless_fc; + + void *t2; + dma_addr_t t2_mapping; + struct cnic_ops __rcu *cnic_ops; + void *cnic_data; + u32 cnic_tag; + struct cnic_eth_dev cnic_eth_dev; + union host_hc_status_block cnic_sb; + dma_addr_t cnic_sb_mapping; + struct eth_spe *cnic_kwq; + struct eth_spe *cnic_kwq_prod; + struct eth_spe *cnic_kwq_cons; + struct eth_spe *cnic_kwq_last; + u16 cnic_kwq_pending; + u16 cnic_spq_pending; + u8 fip_mac[ETH_ALEN]; + struct mutex cnic_mutex; + struct bnx2x_vlan_mac_obj iscsi_l2_mac_obj; + + /* Start index of the "special" (CNIC related) L2 clients */ + u8 cnic_base_cl_id; + + int dmae_ready; + /* used to synchronize dmae accesses */ + spinlock_t dmae_lock; + + /* used to protect the FW mail box */ + struct mutex fw_mb_mutex; + + /* used to synchronize stats collecting */ + int stats_state; + + /* used for synchronization of concurrent threads statistics handling */ + struct semaphore stats_lock; + + /* used by dmae command loader */ + struct dmae_command stats_dmae; + int executer_idx; + + u16 stats_counter; + struct bnx2x_eth_stats eth_stats; + struct host_func_stats func_stats; + struct bnx2x_eth_stats_old eth_stats_old; + struct bnx2x_net_stats_old net_stats_old; + struct bnx2x_fw_port_stats_old fw_stats_old; + bool stats_init; + + struct z_stream_s *strm; + void *gunzip_buf; + dma_addr_t gunzip_mapping; + int gunzip_outlen; +#define FW_BUF_SIZE 0x8000 +#define GUNZIP_BUF(bp) (bp->gunzip_buf) +#define GUNZIP_PHYS(bp) (bp->gunzip_mapping) +#define GUNZIP_OUTLEN(bp) (bp->gunzip_outlen) + + struct raw_op *init_ops; + /* Init blocks offsets inside init_ops */ + u16 *init_ops_offsets; + /* Data blob - has 32 bit granularity */ + u32 *init_data; + u32 init_mode_flags; +#define INIT_MODE_FLAGS(bp) (bp->init_mode_flags) + /* Zipped PRAM blobs - raw data */ + const u8 *tsem_int_table_data; + const u8 *tsem_pram_data; + const u8 *usem_int_table_data; + const u8 *usem_pram_data; + const u8 *xsem_int_table_data; + const u8 *xsem_pram_data; + const u8 *csem_int_table_data; + const u8 *csem_pram_data; +#define INIT_OPS(bp) (bp->init_ops) +#define INIT_OPS_OFFSETS(bp) (bp->init_ops_offsets) +#define INIT_DATA(bp) (bp->init_data) +#define INIT_TSEM_INT_TABLE_DATA(bp) (bp->tsem_int_table_data) +#define INIT_TSEM_PRAM_DATA(bp) (bp->tsem_pram_data) +#define INIT_USEM_INT_TABLE_DATA(bp) (bp->usem_int_table_data) +#define INIT_USEM_PRAM_DATA(bp) (bp->usem_pram_data) +#define INIT_XSEM_INT_TABLE_DATA(bp) (bp->xsem_int_table_data) +#define INIT_XSEM_PRAM_DATA(bp) (bp->xsem_pram_data) +#define INIT_CSEM_INT_TABLE_DATA(bp) (bp->csem_int_table_data) +#define INIT_CSEM_PRAM_DATA(bp) (bp->csem_pram_data) + +#define PHY_FW_VER_LEN 20 + char fw_ver[32]; + const struct firmware *firmware; + + struct bnx2x_vfdb *vfdb; +#define IS_SRIOV(bp) ((bp)->vfdb) + + /* DCB support on/off */ + u16 dcb_state; +#define BNX2X_DCB_STATE_OFF 0 +#define BNX2X_DCB_STATE_ON 1 + + /* DCBX engine mode */ + int dcbx_enabled; +#define BNX2X_DCBX_ENABLED_OFF 0 +#define BNX2X_DCBX_ENABLED_ON_NEG_OFF 1 +#define BNX2X_DCBX_ENABLED_ON_NEG_ON 2 +#define BNX2X_DCBX_ENABLED_INVALID (-1) + + bool dcbx_mode_uset; + + struct bnx2x_config_dcbx_params dcbx_config_params; + struct bnx2x_dcbx_port_params dcbx_port_params; + int dcb_version; + + /* CAM credit pools */ + struct bnx2x_credit_pool_obj vlans_pool; + + struct bnx2x_credit_pool_obj macs_pool; + + /* RX_MODE object */ + struct bnx2x_rx_mode_obj rx_mode_obj; + + /* MCAST object */ + struct bnx2x_mcast_obj mcast_obj; + + /* RSS configuration object */ + struct bnx2x_rss_config_obj rss_conf_obj; + + /* Function State controlling object */ + struct bnx2x_func_sp_obj func_obj; + + unsigned long sp_state; + + /* operation indication for the sp_rtnl task */ + unsigned long sp_rtnl_state; + + /* Indication of the IOV tasks */ + unsigned long iov_task_state; + + /* DCBX Negotiation results */ + struct dcbx_features dcbx_local_feat; + u32 dcbx_error; + +#ifdef BCM_DCBNL + struct dcbx_features dcbx_remote_feat; + u32 dcbx_remote_flags; +#endif + /* AFEX: store default vlan used */ + int afex_def_vlan_tag; + enum mf_cfg_afex_vlan_mode afex_vlan_mode; + u32 pending_max; + + /* multiple tx classes of service */ + u8 max_cos; + + /* priority to cos mapping */ + u8 prio_to_cos[8]; + + int fp_array_size; + u32 dump_preset_idx; + + u8 phys_port_id[ETH_ALEN]; + + /* PTP related context */ + struct ptp_clock *ptp_clock; + struct ptp_clock_info ptp_clock_info; + struct work_struct ptp_task; + struct cyclecounter cyclecounter; + struct timecounter timecounter; + bool timecounter_init_done; + struct sk_buff *ptp_tx_skb; + unsigned long ptp_tx_start; + bool hwtstamp_ioctl_called; + u16 tx_type; + u16 rx_filter; + + struct bnx2x_link_report_data vf_link_vars; + struct list_head vlan_reg; + u16 vlan_cnt; + u16 vlan_credit; + bool accept_any_vlan; + + /* Vxlan/Geneve related information */ + u16 udp_tunnel_ports[BNX2X_UDP_PORT_MAX]; + +#define FW_CAP_INVALIDATE_VF_FP_HSI BIT(0) + u32 fw_cap; + + u32 fw_major; + u32 fw_minor; + u32 fw_rev; + u32 fw_eng; +}; + +/* Tx queues may be less or equal to Rx queues */ +extern int num_queues; +#define BNX2X_NUM_QUEUES(bp) (bp->num_queues) +#define BNX2X_NUM_ETH_QUEUES(bp) ((bp)->num_ethernet_queues) +#define BNX2X_NUM_NON_CNIC_QUEUES(bp) (BNX2X_NUM_QUEUES(bp) - \ + (bp)->num_cnic_queues) +#define BNX2X_NUM_RX_QUEUES(bp) BNX2X_NUM_QUEUES(bp) + +#define is_multi(bp) (BNX2X_NUM_QUEUES(bp) > 1) + +#define BNX2X_MAX_QUEUES(bp) BNX2X_MAX_RSS_COUNT(bp) +/* #define is_eth_multi(bp) (BNX2X_NUM_ETH_QUEUES(bp) > 1) */ + +#define RSS_IPV4_CAP_MASK \ + TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV4_CAPABILITY + +#define RSS_IPV4_TCP_CAP_MASK \ + TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV4_TCP_CAPABILITY + +#define RSS_IPV6_CAP_MASK \ + TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV6_CAPABILITY + +#define RSS_IPV6_TCP_CAP_MASK \ + TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV6_TCP_CAPABILITY + +struct bnx2x_func_init_params { + /* dma */ + bool spq_active; + dma_addr_t spq_map; + u16 spq_prod; + + u16 func_id; /* abs fid */ + u16 pf_id; +}; + +#define for_each_cnic_queue(bp, var) \ + for ((var) = BNX2X_NUM_ETH_QUEUES(bp); (var) < BNX2X_NUM_QUEUES(bp); \ + (var)++) \ + if (skip_queue(bp, var)) \ + continue; \ + else + +#define for_each_eth_queue(bp, var) \ + for ((var) = 0; (var) < BNX2X_NUM_ETH_QUEUES(bp); (var)++) + +#define for_each_nondefault_eth_queue(bp, var) \ + for ((var) = 1; (var) < BNX2X_NUM_ETH_QUEUES(bp); (var)++) + +#define for_each_queue(bp, var) \ + for ((var) = 0; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \ + if (skip_queue(bp, var)) \ + continue; \ + else + +/* Skip forwarding FP */ +#define for_each_valid_rx_queue(bp, var) \ + for ((var) = 0; \ + (var) < (CNIC_LOADED(bp) ? BNX2X_NUM_QUEUES(bp) : \ + BNX2X_NUM_ETH_QUEUES(bp)); \ + (var)++) \ + if (skip_rx_queue(bp, var)) \ + continue; \ + else + +#define for_each_rx_queue_cnic(bp, var) \ + for ((var) = BNX2X_NUM_ETH_QUEUES(bp); (var) < BNX2X_NUM_QUEUES(bp); \ + (var)++) \ + if (skip_rx_queue(bp, var)) \ + continue; \ + else + +#define for_each_rx_queue(bp, var) \ + for ((var) = 0; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \ + if (skip_rx_queue(bp, var)) \ + continue; \ + else + +/* Skip OOO FP */ +#define for_each_valid_tx_queue(bp, var) \ + for ((var) = 0; \ + (var) < (CNIC_LOADED(bp) ? BNX2X_NUM_QUEUES(bp) : \ + BNX2X_NUM_ETH_QUEUES(bp)); \ + (var)++) \ + if (skip_tx_queue(bp, var)) \ + continue; \ + else + +#define for_each_tx_queue_cnic(bp, var) \ + for ((var) = BNX2X_NUM_ETH_QUEUES(bp); (var) < BNX2X_NUM_QUEUES(bp); \ + (var)++) \ + if (skip_tx_queue(bp, var)) \ + continue; \ + else + +#define for_each_tx_queue(bp, var) \ + for ((var) = 0; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \ + if (skip_tx_queue(bp, var)) \ + continue; \ + else + +#define for_each_nondefault_queue(bp, var) \ + for ((var) = 1; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \ + if (skip_queue(bp, var)) \ + continue; \ + else + +#define for_each_cos_in_tx_queue(fp, var) \ + for ((var) = 0; (var) < (fp)->max_cos; (var)++) + +/* skip rx queue + * if FCOE l2 support is disabled and this is the fcoe L2 queue + */ +#define skip_rx_queue(bp, idx) (NO_FCOE(bp) && IS_FCOE_IDX(idx)) + +/* skip tx queue + * if FCOE l2 support is disabled and this is the fcoe L2 queue + */ +#define skip_tx_queue(bp, idx) (NO_FCOE(bp) && IS_FCOE_IDX(idx)) + +#define skip_queue(bp, idx) (NO_FCOE(bp) && IS_FCOE_IDX(idx)) + +/*self test*/ +int bnx2x_idle_chk(struct bnx2x *bp); + +/** + * bnx2x_set_mac_one - configure a single MAC address + * + * @bp: driver handle + * @mac: MAC to configure + * @obj: MAC object handle + * @set: if 'true' add a new MAC, otherwise - delete + * @mac_type: the type of the MAC to configure (e.g. ETH, UC list) + * @ramrod_flags: RAMROD_XXX flags (e.g. RAMROD_CONT, RAMROD_COMP_WAIT) + * + * Configures one MAC according to provided parameters or continues the + * execution of previously scheduled commands if RAMROD_CONT is set in + * ramrod_flags. + * + * Returns zero if operation has successfully completed, a positive value if the + * operation has been successfully scheduled and a negative - if a requested + * operations has failed. + */ +int bnx2x_set_mac_one(struct bnx2x *bp, const u8 *mac, + struct bnx2x_vlan_mac_obj *obj, bool set, + int mac_type, unsigned long *ramrod_flags); + +int bnx2x_set_vlan_one(struct bnx2x *bp, u16 vlan, + struct bnx2x_vlan_mac_obj *obj, bool set, + unsigned long *ramrod_flags); + +/** + * bnx2x_del_all_macs - delete all MACs configured for the specific MAC object + * + * @bp: driver handle + * @mac_obj: MAC object handle + * @mac_type: type of the MACs to clear (BNX2X_XXX_MAC) + * @wait_for_comp: if 'true' block until completion + * + * Deletes all MACs of the specific type (e.g. ETH, UC list). + * + * Returns zero if operation has successfully completed, a positive value if the + * operation has been successfully scheduled and a negative - if a requested + * operations has failed. + */ +int bnx2x_del_all_macs(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *mac_obj, + int mac_type, bool wait_for_comp); + +/* Init Function API */ +void bnx2x_func_init(struct bnx2x *bp, struct bnx2x_func_init_params *p); +void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid, + u8 vf_valid, int fw_sb_id, int igu_sb_id); +int bnx2x_get_gpio(struct bnx2x *bp, int gpio_num, u8 port); +int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port); +int bnx2x_set_mult_gpio(struct bnx2x *bp, u8 pins, u32 mode); +int bnx2x_set_gpio_int(struct bnx2x *bp, int gpio_num, u32 mode, u8 port); +void bnx2x_read_mf_cfg(struct bnx2x *bp); + +int bnx2x_pretend_func(struct bnx2x *bp, u16 pretend_func_val); + +/* dmae */ +void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32); +void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr, + u32 len32); +void bnx2x_post_dmae(struct bnx2x *bp, struct dmae_command *dmae, int idx); +u32 bnx2x_dmae_opcode_add_comp(u32 opcode, u8 comp_type); +u32 bnx2x_dmae_opcode_clr_src_reset(u32 opcode); +u32 bnx2x_dmae_opcode(struct bnx2x *bp, u8 src_type, u8 dst_type, + bool with_comp, u8 comp_type); + +void bnx2x_prep_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae, + u8 src_type, u8 dst_type); +int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae, + u32 *comp); + +/* FLR related routines */ +u32 bnx2x_flr_clnup_poll_count(struct bnx2x *bp); +void bnx2x_tx_hw_flushed(struct bnx2x *bp, u32 poll_count); +int bnx2x_send_final_clnup(struct bnx2x *bp, u8 clnup_func, u32 poll_cnt); +u8 bnx2x_is_pcie_pending(struct pci_dev *dev); +int bnx2x_flr_clnup_poll_hw_counter(struct bnx2x *bp, u32 reg, + char *msg, u32 poll_cnt); + +void bnx2x_calc_fc_adv(struct bnx2x *bp); +int bnx2x_sp_post(struct bnx2x *bp, int command, int cid, + u32 data_hi, u32 data_lo, int cmd_type); +void bnx2x_update_coalesce(struct bnx2x *bp); +int bnx2x_get_cur_phy_idx(struct bnx2x *bp); + +bool bnx2x_port_after_undi(struct bnx2x *bp); + +static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms, + int wait) +{ + u32 val; + + do { + val = REG_RD(bp, reg); + if (val == expected) + break; + ms -= wait; + msleep(wait); + + } while (ms > 0); + + return val; +} + +void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id, + bool is_pf); + +#define BNX2X_ILT_ZALLOC(x, y, size) \ + x = dma_alloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL) + +#define BNX2X_ILT_FREE(x, y, size) \ + do { \ + if (x) { \ + dma_free_coherent(&bp->pdev->dev, size, x, y); \ + x = NULL; \ + y = 0; \ + } \ + } while (0) + +#define ILOG2(x) (ilog2((x))) + +#define ILT_NUM_PAGE_ENTRIES (3072) +/* In 57710/11 we use whole table since we have 8 func + * In 57712 we have only 4 func, but use same size per func, then only half of + * the table in use + */ +#define ILT_PER_FUNC (ILT_NUM_PAGE_ENTRIES/8) + +#define FUNC_ILT_BASE(func) (func * ILT_PER_FUNC) +/* + * the phys address is shifted right 12 bits and has an added + * 1=valid bit added to the 53rd bit + * then since this is a wide register(TM) + * we split it into two 32 bit writes + */ +#define ONCHIP_ADDR1(x) ((u32)(((u64)x >> 12) & 0xFFFFFFFF)) +#define ONCHIP_ADDR2(x) ((u32)((1 << 20) | ((u64)x >> 44))) + +/* load/unload mode */ +#define LOAD_NORMAL 0 +#define LOAD_OPEN 1 +#define LOAD_DIAG 2 +#define LOAD_LOOPBACK_EXT 3 +#define UNLOAD_NORMAL 0 +#define UNLOAD_CLOSE 1 +#define UNLOAD_RECOVERY 2 + +/* DMAE command defines */ +#define DMAE_TIMEOUT -1 +#define DMAE_PCI_ERROR -2 /* E2 and onward */ +#define DMAE_NOT_RDY -3 +#define DMAE_PCI_ERR_FLAG 0x80000000 + +#define DMAE_SRC_PCI 0 +#define DMAE_SRC_GRC 1 + +#define DMAE_DST_NONE 0 +#define DMAE_DST_PCI 1 +#define DMAE_DST_GRC 2 + +#define DMAE_COMP_PCI 0 +#define DMAE_COMP_GRC 1 + +/* E2 and onward - PCI error handling in the completion */ + +#define DMAE_COMP_REGULAR 0 +#define DMAE_COM_SET_ERR 1 + +#define DMAE_CMD_SRC_PCI (DMAE_SRC_PCI << \ + DMAE_COMMAND_SRC_SHIFT) +#define DMAE_CMD_SRC_GRC (DMAE_SRC_GRC << \ + DMAE_COMMAND_SRC_SHIFT) + +#define DMAE_CMD_DST_PCI (DMAE_DST_PCI << \ + DMAE_COMMAND_DST_SHIFT) +#define DMAE_CMD_DST_GRC (DMAE_DST_GRC << \ + DMAE_COMMAND_DST_SHIFT) + +#define DMAE_CMD_C_DST_PCI (DMAE_COMP_PCI << \ + DMAE_COMMAND_C_DST_SHIFT) +#define DMAE_CMD_C_DST_GRC (DMAE_COMP_GRC << \ + DMAE_COMMAND_C_DST_SHIFT) + +#define DMAE_CMD_C_ENABLE DMAE_COMMAND_C_TYPE_ENABLE + +#define DMAE_CMD_ENDIANITY_NO_SWAP (0 << DMAE_COMMAND_ENDIANITY_SHIFT) +#define DMAE_CMD_ENDIANITY_B_SWAP (1 << DMAE_COMMAND_ENDIANITY_SHIFT) +#define DMAE_CMD_ENDIANITY_DW_SWAP (2 << DMAE_COMMAND_ENDIANITY_SHIFT) +#define DMAE_CMD_ENDIANITY_B_DW_SWAP (3 << DMAE_COMMAND_ENDIANITY_SHIFT) + +#define DMAE_CMD_PORT_0 0 +#define DMAE_CMD_PORT_1 DMAE_COMMAND_PORT + +#define DMAE_CMD_SRC_RESET DMAE_COMMAND_SRC_RESET +#define DMAE_CMD_DST_RESET DMAE_COMMAND_DST_RESET +#define DMAE_CMD_E1HVN_SHIFT DMAE_COMMAND_E1HVN_SHIFT + +#define DMAE_SRC_PF 0 +#define DMAE_SRC_VF 1 + +#define DMAE_DST_PF 0 +#define DMAE_DST_VF 1 + +#define DMAE_C_SRC 0 +#define DMAE_C_DST 1 + +#define DMAE_LEN32_RD_MAX 0x80 +#define DMAE_LEN32_WR_MAX(bp) (CHIP_IS_E1(bp) ? 0x400 : 0x2000) + +#define DMAE_COMP_VAL 0x60d0d0ae /* E2 and on - upper bit + * indicates error + */ + +#define MAX_DMAE_C_PER_PORT 8 +#define INIT_DMAE_C(bp) (BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \ + BP_VN(bp)) +#define PMF_DMAE_C(bp) (BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \ + E1HVN_MAX) + +/* Following is the DMAE channel number allocation for the clients. + * MFW: OCBB/OCSD implementations use DMAE channels 14/15 respectively. + * Driver: 0-3 and 8-11 (for PF dmae operations) + * 4 and 12 (for stats requests) + */ +#define BNX2X_FW_DMAE_C 13 /* Channel for FW DMAE operations */ + +/* PCIE link and speed */ +#define PCICFG_LINK_WIDTH 0x1f00000 +#define PCICFG_LINK_WIDTH_SHIFT 20 +#define PCICFG_LINK_SPEED 0xf0000 +#define PCICFG_LINK_SPEED_SHIFT 16 + +#define BNX2X_NUM_TESTS_SF 7 +#define BNX2X_NUM_TESTS_MF 3 +#define BNX2X_NUM_TESTS(bp) (IS_MF(bp) ? BNX2X_NUM_TESTS_MF : \ + IS_VF(bp) ? 0 : BNX2X_NUM_TESTS_SF) + +#define BNX2X_PHY_LOOPBACK 0 +#define BNX2X_MAC_LOOPBACK 1 +#define BNX2X_EXT_LOOPBACK 2 +#define BNX2X_PHY_LOOPBACK_FAILED 1 +#define BNX2X_MAC_LOOPBACK_FAILED 2 +#define BNX2X_EXT_LOOPBACK_FAILED 3 +#define BNX2X_LOOPBACK_FAILED (BNX2X_MAC_LOOPBACK_FAILED | \ + BNX2X_PHY_LOOPBACK_FAILED) + +#define STROM_ASSERT_ARRAY_SIZE 50 + +/* must be used on a CID before placing it on a HW ring */ +#define HW_CID(bp, x) ((BP_PORT(bp) << 23) | \ + (BP_VN(bp) << BNX2X_SWCID_SHIFT) | \ + (x)) + +#define SP_DESC_CNT (BCM_PAGE_SIZE / sizeof(struct eth_spe)) +#define MAX_SP_DESC_CNT (SP_DESC_CNT - 1) + +#define BNX2X_BTR 4 +#define MAX_SPQ_PENDING 8 + +/* CMNG constants, as derived from system spec calculations */ +/* default MIN rate in case VNIC min rate is configured to zero - 100Mbps */ +#define DEF_MIN_RATE 100 +/* resolution of the rate shaping timer - 400 usec */ +#define RS_PERIODIC_TIMEOUT_USEC 400 +/* number of bytes in single QM arbitration cycle - + * coefficient for calculating the fairness timer */ +#define QM_ARB_BYTES 160000 +/* resolution of Min algorithm 1:100 */ +#define MIN_RES 100 +/* how many bytes above threshold for the minimal credit of Min algorithm*/ +#define MIN_ABOVE_THRESH 32768 +/* Fairness algorithm integration time coefficient - + * for calculating the actual Tfair */ +#define T_FAIR_COEF ((MIN_ABOVE_THRESH + QM_ARB_BYTES) * 8 * MIN_RES) +/* Memory of fairness algorithm . 2 cycles */ +#define FAIR_MEM 2 + +#define ATTN_NIG_FOR_FUNC (1L << 8) +#define ATTN_SW_TIMER_4_FUNC (1L << 9) +#define GPIO_2_FUNC (1L << 10) +#define GPIO_3_FUNC (1L << 11) +#define GPIO_4_FUNC (1L << 12) +#define ATTN_GENERAL_ATTN_1 (1L << 13) +#define ATTN_GENERAL_ATTN_2 (1L << 14) +#define ATTN_GENERAL_ATTN_3 (1L << 15) +#define ATTN_GENERAL_ATTN_4 (1L << 13) +#define ATTN_GENERAL_ATTN_5 (1L << 14) +#define ATTN_GENERAL_ATTN_6 (1L << 15) + +#define ATTN_HARD_WIRED_MASK 0xff00 +#define ATTENTION_ID 4 + +#define IS_MF_STORAGE_ONLY(bp) (IS_MF_STORAGE_PERSONALITY_ONLY(bp) || \ + IS_MF_FCOE_AFEX(bp)) + +/* stuff added to make the code fit 80Col */ + +#define BNX2X_PMF_LINK_ASSERT \ + GENERAL_ATTEN_OFFSET(LINK_SYNC_ATTENTION_BIT_FUNC_0 + BP_FUNC(bp)) + +#define BNX2X_MC_ASSERT_BITS \ + (GENERAL_ATTEN_OFFSET(TSTORM_FATAL_ASSERT_ATTENTION_BIT) | \ + GENERAL_ATTEN_OFFSET(USTORM_FATAL_ASSERT_ATTENTION_BIT) | \ + GENERAL_ATTEN_OFFSET(CSTORM_FATAL_ASSERT_ATTENTION_BIT) | \ + GENERAL_ATTEN_OFFSET(XSTORM_FATAL_ASSERT_ATTENTION_BIT)) + +#define BNX2X_MCP_ASSERT \ + GENERAL_ATTEN_OFFSET(MCP_FATAL_ASSERT_ATTENTION_BIT) + +#define BNX2X_GRC_TIMEOUT GENERAL_ATTEN_OFFSET(LATCHED_ATTN_TIMEOUT_GRC) +#define BNX2X_GRC_RSV (GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RBCR) | \ + GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RBCT) | \ + GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RBCN) | \ + GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RBCU) | \ + GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RBCP) | \ + GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RSVD_GRC)) + +#define HW_INTERRUPT_ASSERT_SET_0 \ + (AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_BRB_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_PBCLIENT_HW_INTERRUPT) +#define HW_PRTY_ASSERT_SET_0 (AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR) +#define HW_INTERRUPT_ASSERT_SET_1 \ + (AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_XSDM_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_XCM_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_XSEMI_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_USDM_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_UCM_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_USEMI_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_UPB_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_CSDM_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT) +#define HW_PRTY_ASSERT_SET_1 (AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR) +#define HW_INTERRUPT_ASSERT_SET_2 \ + (AEU_INPUTS_ATTN_BITS_CSEMI_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT | \ + AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT |\ + AEU_INPUTS_ATTN_BITS_MISC_HW_INTERRUPT) +#define HW_PRTY_ASSERT_SET_2 (AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR) + +#define HW_PRTY_ASSERT_SET_3_WITHOUT_SCPAD \ + (AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY | \ + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY | \ + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY) + +#define HW_PRTY_ASSERT_SET_3 (HW_PRTY_ASSERT_SET_3_WITHOUT_SCPAD | \ + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY) + +#define HW_PRTY_ASSERT_SET_4 (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR | \ + AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR) + +#define MULTI_MASK 0x7f + +#define DEF_USB_FUNC_OFF offsetof(struct cstorm_def_status_block_u, func) +#define DEF_CSB_FUNC_OFF offsetof(struct cstorm_def_status_block_c, func) +#define DEF_XSB_FUNC_OFF offsetof(struct xstorm_def_status_block, func) +#define DEF_TSB_FUNC_OFF offsetof(struct tstorm_def_status_block, func) + +#define DEF_USB_IGU_INDEX_OFF \ + offsetof(struct cstorm_def_status_block_u, igu_index) +#define DEF_CSB_IGU_INDEX_OFF \ + offsetof(struct cstorm_def_status_block_c, igu_index) +#define DEF_XSB_IGU_INDEX_OFF \ + offsetof(struct xstorm_def_status_block, igu_index) +#define DEF_TSB_IGU_INDEX_OFF \ + offsetof(struct tstorm_def_status_block, igu_index) + +#define DEF_USB_SEGMENT_OFF \ + offsetof(struct cstorm_def_status_block_u, segment) +#define DEF_CSB_SEGMENT_OFF \ + offsetof(struct cstorm_def_status_block_c, segment) +#define DEF_XSB_SEGMENT_OFF \ + offsetof(struct xstorm_def_status_block, segment) +#define DEF_TSB_SEGMENT_OFF \ + offsetof(struct tstorm_def_status_block, segment) + +#define BNX2X_SP_DSB_INDEX \ + (&bp->def_status_blk->sp_sb.\ + index_values[HC_SP_INDEX_ETH_DEF_CONS]) + +#define CAM_IS_INVALID(x) \ + (GET_FLAG(x.flags, \ + MAC_CONFIGURATION_ENTRY_ACTION_TYPE) == \ + (T_ETH_MAC_COMMAND_INVALIDATE)) + +/* Number of u32 elements in MC hash array */ +#define MC_HASH_SIZE 8 +#define MC_HASH_OFFSET(bp, i) (BAR_TSTRORM_INTMEM + \ + TSTORM_APPROXIMATE_MATCH_MULTICAST_FILTERING_OFFSET(BP_FUNC(bp)) + i*4) + +#ifndef PXP2_REG_PXP2_INT_STS +#define PXP2_REG_PXP2_INT_STS PXP2_REG_PXP2_INT_STS_0 +#endif + +#ifndef ETH_MAX_RX_CLIENTS_E2 +#define ETH_MAX_RX_CLIENTS_E2 ETH_MAX_RX_CLIENTS_E1H +#endif + +#define VENDOR_ID_LEN 4 + +#define VF_ACQUIRE_THRESH 3 +#define VF_ACQUIRE_MAC_FILTERS 1 +#define VF_ACQUIRE_MC_FILTERS 10 +#define VF_ACQUIRE_VLAN_FILTERS 2 /* VLAN0 + 'real' VLAN */ + +#define GOOD_ME_REG(me_reg) (((me_reg) & ME_REG_VF_VALID) && \ + (!((me_reg) & ME_REG_VF_ERR))) +int bnx2x_compare_fw_ver(struct bnx2x *bp, u32 load_code, bool print_err); + +/* Congestion management fairness mode */ +#define CMNG_FNS_NONE 0 +#define CMNG_FNS_MINMAX 1 + +#define HC_SEG_ACCESS_DEF 0 /*Driver decision 0-3*/ +#define HC_SEG_ACCESS_ATTN 4 +#define HC_SEG_ACCESS_NORM 0 /*Driver decision 0-1*/ + +void bnx2x_set_ethtool_ops(struct bnx2x *bp, struct net_device *netdev); +void bnx2x_notify_link_changed(struct bnx2x *bp); + +#define BNX2X_MF_SD_PROTOCOL(bp) \ + ((bp)->mf_config[BP_VN(bp)] & FUNC_MF_CFG_PROTOCOL_MASK) + +#define BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp) \ + (BNX2X_MF_SD_PROTOCOL(bp) == FUNC_MF_CFG_PROTOCOL_ISCSI) + +#define BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp) \ + (BNX2X_MF_SD_PROTOCOL(bp) == FUNC_MF_CFG_PROTOCOL_FCOE) + +#define IS_MF_ISCSI_SD(bp) (IS_MF_SD(bp) && BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp)) +#define IS_MF_FCOE_SD(bp) (IS_MF_SD(bp) && BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp)) +#define IS_MF_ISCSI_SI(bp) (IS_MF_SI(bp) && BNX2X_IS_MF_EXT_PROTOCOL_ISCSI(bp)) + +#define IS_MF_ISCSI_ONLY(bp) (IS_MF_ISCSI_SD(bp) || IS_MF_ISCSI_SI(bp)) + +#define BNX2X_MF_EXT_PROTOCOL_MASK \ + (MACP_FUNC_CFG_FLAGS_ETHERNET | \ + MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD | \ + MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD) + +#define BNX2X_MF_EXT_PROT(bp) ((bp)->mf_ext_config & \ + BNX2X_MF_EXT_PROTOCOL_MASK) + +#define BNX2X_HAS_MF_EXT_PROTOCOL_FCOE(bp) \ + (BNX2X_MF_EXT_PROT(bp) & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD) + +#define BNX2X_IS_MF_EXT_PROTOCOL_FCOE(bp) \ + (BNX2X_MF_EXT_PROT(bp) == MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD) + +#define BNX2X_IS_MF_EXT_PROTOCOL_ISCSI(bp) \ + (BNX2X_MF_EXT_PROT(bp) == MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD) + +#define IS_MF_FCOE_AFEX(bp) \ + (IS_MF_AFEX(bp) && BNX2X_IS_MF_EXT_PROTOCOL_FCOE(bp)) + +#define IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp) \ + (IS_MF_SD(bp) && \ + (BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp) || \ + BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp))) + +#define IS_MF_SI_STORAGE_PERSONALITY_ONLY(bp) \ + (IS_MF_SI(bp) && \ + (BNX2X_IS_MF_EXT_PROTOCOL_ISCSI(bp) || \ + BNX2X_IS_MF_EXT_PROTOCOL_FCOE(bp))) + +#define IS_MF_STORAGE_PERSONALITY_ONLY(bp) \ + (IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp) || \ + IS_MF_SI_STORAGE_PERSONALITY_ONLY(bp)) + +/* Determines whether BW configuration arrives in 100Mb units or in + * percentages from actual physical link speed. + */ +#define IS_MF_PERCENT_BW(bp) (IS_MF_SI(bp) || IS_MF_UFP(bp) || IS_MF_BD(bp)) + +#define SET_FLAG(value, mask, flag) \ + do {\ + (value) &= ~(mask);\ + (value) |= ((flag) << (mask##_SHIFT));\ + } while (0) + +#define GET_FLAG(value, mask) \ + (((value) & (mask)) >> (mask##_SHIFT)) + +#define GET_FIELD(value, fname) \ + (((value) & (fname##_MASK)) >> (fname##_SHIFT)) + +enum { + SWITCH_UPDATE, + AFEX_UPDATE, +}; + +#define NUM_MACS 8 + +void bnx2x_set_local_cmng(struct bnx2x *bp); + +void bnx2x_update_mng_version(struct bnx2x *bp); + +void bnx2x_update_mfw_dump(struct bnx2x *bp); + +#define MCPR_SCRATCH_BASE(bp) \ + (CHIP_IS_E1x(bp) ? MCP_REG_MCPR_SCRATCH : MCP_A_REG_MCPR_SCRATCH) + +#define E1H_MAX_MF_SB_COUNT (HC_SB_MAX_SB_E1X/(E1HVN_MAX * PORT_MAX)) + +void bnx2x_init_ptp(struct bnx2x *bp); +int bnx2x_configure_ptp_filters(struct bnx2x *bp); +void bnx2x_set_rx_ts(struct bnx2x *bp, struct sk_buff *skb); +void bnx2x_register_phc(struct bnx2x *bp); + +#define BNX2X_MAX_PHC_DRIFT 31000000 +#define BNX2X_PTP_TX_TIMEOUT + +/* Re-configure all previously configured vlan filters. + * Meant for implicit re-load flows. + */ +int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp); +#endif /* bnx2x.h */ |