summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/chelsio/cxgb/mv88e1xxx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/chelsio/cxgb/mv88e1xxx.c')
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/mv88e1xxx.c398
1 files changed, 398 insertions, 0 deletions
diff --git a/drivers/net/ethernet/chelsio/cxgb/mv88e1xxx.c b/drivers/net/ethernet/chelsio/cxgb/mv88e1xxx.c
new file mode 100644
index 000000000..30b003484
--- /dev/null
+++ b/drivers/net/ethernet/chelsio/cxgb/mv88e1xxx.c
@@ -0,0 +1,398 @@
+// SPDX-License-Identifier: GPL-2.0
+/* $Date: 2005/10/24 23:18:13 $ $RCSfile: mv88e1xxx.c,v $ $Revision: 1.49 $ */
+#include "common.h"
+#include "mv88e1xxx.h"
+#include "cphy.h"
+#include "elmer0.h"
+
+/* MV88E1XXX MDI crossover register values */
+#define CROSSOVER_MDI 0
+#define CROSSOVER_MDIX 1
+#define CROSSOVER_AUTO 3
+
+#define INTR_ENABLE_MASK 0x6CA0
+
+/*
+ * Set the bits given by 'bitval' in PHY register 'reg'.
+ */
+static void mdio_set_bit(struct cphy *cphy, int reg, u32 bitval)
+{
+ u32 val;
+
+ (void) simple_mdio_read(cphy, reg, &val);
+ (void) simple_mdio_write(cphy, reg, val | bitval);
+}
+
+/*
+ * Clear the bits given by 'bitval' in PHY register 'reg'.
+ */
+static void mdio_clear_bit(struct cphy *cphy, int reg, u32 bitval)
+{
+ u32 val;
+
+ (void) simple_mdio_read(cphy, reg, &val);
+ (void) simple_mdio_write(cphy, reg, val & ~bitval);
+}
+
+/*
+ * NAME: phy_reset
+ *
+ * DESC: Reset the given PHY's port. NOTE: This is not a global
+ * chip reset.
+ *
+ * PARAMS: cphy - Pointer to PHY instance data.
+ *
+ * RETURN: 0 - Successful reset.
+ * -1 - Timeout.
+ */
+static int mv88e1xxx_reset(struct cphy *cphy, int wait)
+{
+ u32 ctl;
+ int time_out = 1000;
+
+ mdio_set_bit(cphy, MII_BMCR, BMCR_RESET);
+
+ do {
+ (void) simple_mdio_read(cphy, MII_BMCR, &ctl);
+ ctl &= BMCR_RESET;
+ if (ctl)
+ udelay(1);
+ } while (ctl && --time_out);
+
+ return ctl ? -1 : 0;
+}
+
+static int mv88e1xxx_interrupt_enable(struct cphy *cphy)
+{
+ /* Enable PHY interrupts. */
+ (void) simple_mdio_write(cphy, MV88E1XXX_INTERRUPT_ENABLE_REGISTER,
+ INTR_ENABLE_MASK);
+
+ /* Enable Marvell interrupts through Elmer0. */
+ if (t1_is_asic(cphy->adapter)) {
+ u32 elmer;
+
+ t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
+ elmer |= ELMER0_GP_BIT1;
+ if (is_T2(cphy->adapter))
+ elmer |= ELMER0_GP_BIT2 | ELMER0_GP_BIT3 | ELMER0_GP_BIT4;
+ t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
+ }
+ return 0;
+}
+
+static int mv88e1xxx_interrupt_disable(struct cphy *cphy)
+{
+ /* Disable all phy interrupts. */
+ (void) simple_mdio_write(cphy, MV88E1XXX_INTERRUPT_ENABLE_REGISTER, 0);
+
+ /* Disable Marvell interrupts through Elmer0. */
+ if (t1_is_asic(cphy->adapter)) {
+ u32 elmer;
+
+ t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
+ elmer &= ~ELMER0_GP_BIT1;
+ if (is_T2(cphy->adapter))
+ elmer &= ~(ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4);
+ t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
+ }
+ return 0;
+}
+
+static int mv88e1xxx_interrupt_clear(struct cphy *cphy)
+{
+ u32 elmer;
+
+ /* Clear PHY interrupts by reading the register. */
+ (void) simple_mdio_read(cphy,
+ MV88E1XXX_INTERRUPT_STATUS_REGISTER, &elmer);
+
+ /* Clear Marvell interrupts through Elmer0. */
+ if (t1_is_asic(cphy->adapter)) {
+ t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer);
+ elmer |= ELMER0_GP_BIT1;
+ if (is_T2(cphy->adapter))
+ elmer |= ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4;
+ t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer);
+ }
+ return 0;
+}
+
+/*
+ * Set the PHY speed and duplex. This also disables auto-negotiation, except
+ * for 1Gb/s, where auto-negotiation is mandatory.
+ */
+static int mv88e1xxx_set_speed_duplex(struct cphy *phy, int speed, int duplex)
+{
+ u32 ctl;
+
+ (void) simple_mdio_read(phy, MII_BMCR, &ctl);
+ if (speed >= 0) {
+ ctl &= ~(BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE);
+ if (speed == SPEED_100)
+ ctl |= BMCR_SPEED100;
+ else if (speed == SPEED_1000)
+ ctl |= BMCR_SPEED1000;
+ }
+ if (duplex >= 0) {
+ ctl &= ~(BMCR_FULLDPLX | BMCR_ANENABLE);
+ if (duplex == DUPLEX_FULL)
+ ctl |= BMCR_FULLDPLX;
+ }
+ if (ctl & BMCR_SPEED1000) /* auto-negotiation required for 1Gb/s */
+ ctl |= BMCR_ANENABLE;
+ (void) simple_mdio_write(phy, MII_BMCR, ctl);
+ return 0;
+}
+
+static int mv88e1xxx_crossover_set(struct cphy *cphy, int crossover)
+{
+ u32 data32;
+
+ (void) simple_mdio_read(cphy,
+ MV88E1XXX_SPECIFIC_CNTRL_REGISTER, &data32);
+ data32 &= ~V_PSCR_MDI_XOVER_MODE(M_PSCR_MDI_XOVER_MODE);
+ data32 |= V_PSCR_MDI_XOVER_MODE(crossover);
+ (void) simple_mdio_write(cphy,
+ MV88E1XXX_SPECIFIC_CNTRL_REGISTER, data32);
+ return 0;
+}
+
+static int mv88e1xxx_autoneg_enable(struct cphy *cphy)
+{
+ u32 ctl;
+
+ (void) mv88e1xxx_crossover_set(cphy, CROSSOVER_AUTO);
+
+ (void) simple_mdio_read(cphy, MII_BMCR, &ctl);
+ /* restart autoneg for change to take effect */
+ ctl |= BMCR_ANENABLE | BMCR_ANRESTART;
+ (void) simple_mdio_write(cphy, MII_BMCR, ctl);
+ return 0;
+}
+
+static int mv88e1xxx_autoneg_disable(struct cphy *cphy)
+{
+ u32 ctl;
+
+ /*
+ * Crossover *must* be set to manual in order to disable auto-neg.
+ * The Alaska FAQs document highlights this point.
+ */
+ (void) mv88e1xxx_crossover_set(cphy, CROSSOVER_MDI);
+
+ /*
+ * Must include autoneg reset when disabling auto-neg. This
+ * is described in the Alaska FAQ document.
+ */
+ (void) simple_mdio_read(cphy, MII_BMCR, &ctl);
+ ctl &= ~BMCR_ANENABLE;
+ (void) simple_mdio_write(cphy, MII_BMCR, ctl | BMCR_ANRESTART);
+ return 0;
+}
+
+static int mv88e1xxx_autoneg_restart(struct cphy *cphy)
+{
+ mdio_set_bit(cphy, MII_BMCR, BMCR_ANRESTART);
+ return 0;
+}
+
+static int mv88e1xxx_advertise(struct cphy *phy, unsigned int advertise_map)
+{
+ u32 val = 0;
+
+ if (advertise_map &
+ (ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full)) {
+ (void) simple_mdio_read(phy, MII_GBCR, &val);
+ val &= ~(GBCR_ADV_1000HALF | GBCR_ADV_1000FULL);
+ if (advertise_map & ADVERTISED_1000baseT_Half)
+ val |= GBCR_ADV_1000HALF;
+ if (advertise_map & ADVERTISED_1000baseT_Full)
+ val |= GBCR_ADV_1000FULL;
+ }
+ (void) simple_mdio_write(phy, MII_GBCR, val);
+
+ val = 1;
+ if (advertise_map & ADVERTISED_10baseT_Half)
+ val |= ADVERTISE_10HALF;
+ if (advertise_map & ADVERTISED_10baseT_Full)
+ val |= ADVERTISE_10FULL;
+ if (advertise_map & ADVERTISED_100baseT_Half)
+ val |= ADVERTISE_100HALF;
+ if (advertise_map & ADVERTISED_100baseT_Full)
+ val |= ADVERTISE_100FULL;
+ if (advertise_map & ADVERTISED_PAUSE)
+ val |= ADVERTISE_PAUSE;
+ if (advertise_map & ADVERTISED_ASYM_PAUSE)
+ val |= ADVERTISE_PAUSE_ASYM;
+ (void) simple_mdio_write(phy, MII_ADVERTISE, val);
+ return 0;
+}
+
+static int mv88e1xxx_set_loopback(struct cphy *cphy, int on)
+{
+ if (on)
+ mdio_set_bit(cphy, MII_BMCR, BMCR_LOOPBACK);
+ else
+ mdio_clear_bit(cphy, MII_BMCR, BMCR_LOOPBACK);
+ return 0;
+}
+
+static int mv88e1xxx_get_link_status(struct cphy *cphy, int *link_ok,
+ int *speed, int *duplex, int *fc)
+{
+ u32 status;
+ int sp = -1, dplx = -1, pause = 0;
+
+ (void) simple_mdio_read(cphy,
+ MV88E1XXX_SPECIFIC_STATUS_REGISTER, &status);
+ if ((status & V_PSSR_STATUS_RESOLVED) != 0) {
+ if (status & V_PSSR_RX_PAUSE)
+ pause |= PAUSE_RX;
+ if (status & V_PSSR_TX_PAUSE)
+ pause |= PAUSE_TX;
+ dplx = (status & V_PSSR_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF;
+ sp = G_PSSR_SPEED(status);
+ if (sp == 0)
+ sp = SPEED_10;
+ else if (sp == 1)
+ sp = SPEED_100;
+ else
+ sp = SPEED_1000;
+ }
+ if (link_ok)
+ *link_ok = (status & V_PSSR_LINK) != 0;
+ if (speed)
+ *speed = sp;
+ if (duplex)
+ *duplex = dplx;
+ if (fc)
+ *fc = pause;
+ return 0;
+}
+
+static int mv88e1xxx_downshift_set(struct cphy *cphy, int downshift_enable)
+{
+ u32 val;
+
+ (void) simple_mdio_read(cphy,
+ MV88E1XXX_EXT_PHY_SPECIFIC_CNTRL_REGISTER, &val);
+
+ /*
+ * Set the downshift counter to 2 so we try to establish Gb link
+ * twice before downshifting.
+ */
+ val &= ~(V_DOWNSHIFT_ENABLE | V_DOWNSHIFT_CNT(M_DOWNSHIFT_CNT));
+
+ if (downshift_enable)
+ val |= V_DOWNSHIFT_ENABLE | V_DOWNSHIFT_CNT(2);
+ (void) simple_mdio_write(cphy,
+ MV88E1XXX_EXT_PHY_SPECIFIC_CNTRL_REGISTER, val);
+ return 0;
+}
+
+static int mv88e1xxx_interrupt_handler(struct cphy *cphy)
+{
+ int cphy_cause = 0;
+ u32 status;
+
+ /*
+ * Loop until cause reads zero. Need to handle bouncing interrupts.
+ */
+ while (1) {
+ u32 cause;
+
+ (void) simple_mdio_read(cphy,
+ MV88E1XXX_INTERRUPT_STATUS_REGISTER,
+ &cause);
+ cause &= INTR_ENABLE_MASK;
+ if (!cause)
+ break;
+
+ if (cause & MV88E1XXX_INTR_LINK_CHNG) {
+ (void) simple_mdio_read(cphy,
+ MV88E1XXX_SPECIFIC_STATUS_REGISTER, &status);
+
+ if (status & MV88E1XXX_INTR_LINK_CHNG)
+ cphy->state |= PHY_LINK_UP;
+ else {
+ cphy->state &= ~PHY_LINK_UP;
+ if (cphy->state & PHY_AUTONEG_EN)
+ cphy->state &= ~PHY_AUTONEG_RDY;
+ cphy_cause |= cphy_cause_link_change;
+ }
+ }
+
+ if (cause & MV88E1XXX_INTR_AUTONEG_DONE)
+ cphy->state |= PHY_AUTONEG_RDY;
+
+ if ((cphy->state & (PHY_LINK_UP | PHY_AUTONEG_RDY)) ==
+ (PHY_LINK_UP | PHY_AUTONEG_RDY))
+ cphy_cause |= cphy_cause_link_change;
+ }
+ return cphy_cause;
+}
+
+static void mv88e1xxx_destroy(struct cphy *cphy)
+{
+ kfree(cphy);
+}
+
+static const struct cphy_ops mv88e1xxx_ops = {
+ .destroy = mv88e1xxx_destroy,
+ .reset = mv88e1xxx_reset,
+ .interrupt_enable = mv88e1xxx_interrupt_enable,
+ .interrupt_disable = mv88e1xxx_interrupt_disable,
+ .interrupt_clear = mv88e1xxx_interrupt_clear,
+ .interrupt_handler = mv88e1xxx_interrupt_handler,
+ .autoneg_enable = mv88e1xxx_autoneg_enable,
+ .autoneg_disable = mv88e1xxx_autoneg_disable,
+ .autoneg_restart = mv88e1xxx_autoneg_restart,
+ .advertise = mv88e1xxx_advertise,
+ .set_loopback = mv88e1xxx_set_loopback,
+ .set_speed_duplex = mv88e1xxx_set_speed_duplex,
+ .get_link_status = mv88e1xxx_get_link_status,
+};
+
+static struct cphy *mv88e1xxx_phy_create(struct net_device *dev, int phy_addr,
+ const struct mdio_ops *mdio_ops)
+{
+ struct adapter *adapter = netdev_priv(dev);
+ struct cphy *cphy = kzalloc(sizeof(*cphy), GFP_KERNEL);
+
+ if (!cphy)
+ return NULL;
+
+ cphy_init(cphy, dev, phy_addr, &mv88e1xxx_ops, mdio_ops);
+
+ /* Configure particular PHY's to run in a different mode. */
+ if ((board_info(adapter)->caps & SUPPORTED_TP) &&
+ board_info(adapter)->chip_phy == CHBT_PHY_88E1111) {
+ /*
+ * Configure the PHY transmitter as class A to reduce EMI.
+ */
+ (void) simple_mdio_write(cphy,
+ MV88E1XXX_EXTENDED_ADDR_REGISTER, 0xB);
+ (void) simple_mdio_write(cphy,
+ MV88E1XXX_EXTENDED_REGISTER, 0x8004);
+ }
+ (void) mv88e1xxx_downshift_set(cphy, 1); /* Enable downshift */
+
+ /* LED */
+ if (is_T2(adapter)) {
+ (void) simple_mdio_write(cphy,
+ MV88E1XXX_LED_CONTROL_REGISTER, 0x1);
+ }
+
+ return cphy;
+}
+
+static int mv88e1xxx_phy_reset(adapter_t* adapter)
+{
+ return 0;
+}
+
+const struct gphy t1_mv88e1xxx_ops = {
+ .create = mv88e1xxx_phy_create,
+ .reset = mv88e1xxx_phy_reset
+};