summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/dec/tulip/pnic2.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/dec/tulip/pnic2.c')
-rw-r--r--drivers/net/ethernet/dec/tulip/pnic2.c403
1 files changed, 403 insertions, 0 deletions
diff --git a/drivers/net/ethernet/dec/tulip/pnic2.c b/drivers/net/ethernet/dec/tulip/pnic2.c
new file mode 100644
index 000000000..72a09156b
--- /dev/null
+++ b/drivers/net/ethernet/dec/tulip/pnic2.c
@@ -0,0 +1,403 @@
+/*
+ drivers/net/ethernet/dec/tulip/pnic2.c
+
+ Copyright 2000,2001 The Linux Kernel Team
+ Written/copyright 1994-2001 by Donald Becker.
+ Modified to hep support PNIC_II by Kevin B. Hendricks
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License, incorporated herein by reference.
+
+ Please submit bugs to http://bugzilla.kernel.org/ .
+*/
+
+
+/* Understanding the PNIC_II - everything is this file is based
+ * on the PNIC_II_PDF datasheet which is sorely lacking in detail
+ *
+ * As I understand things, here are the registers and bits that
+ * explain the masks and constants used in this file that are
+ * either different from the 21142/3 or important for basic operation.
+ *
+ *
+ * CSR 6 (mask = 0xfe3bd1fd of bits not to change)
+ * -----
+ * Bit 24 - SCR
+ * Bit 23 - PCS
+ * Bit 22 - TTM (Trasmit Threshold Mode)
+ * Bit 18 - Port Select
+ * Bit 13 - Start - 1, Stop - 0 Transmissions
+ * Bit 11:10 - Loop Back Operation Mode
+ * Bit 9 - Full Duplex mode (Advertise 10BaseT-FD is CSR14<7> is set)
+ * Bit 1 - Start - 1, Stop - 0 Receive
+ *
+ *
+ * CSR 14 (mask = 0xfff0ee39 of bits not to change)
+ * ------
+ * Bit 19 - PAUSE-Pause
+ * Bit 18 - Advertise T4
+ * Bit 17 - Advertise 100baseTx-FD
+ * Bit 16 - Advertise 100baseTx-HD
+ * Bit 12 - LTE - Link Test Enable
+ * Bit 7 - ANE - Auto Negotiate Enable
+ * Bit 6 - HDE - Advertise 10baseT-HD
+ * Bit 2 - Reset to Power down - kept as 1 for normal operation
+ * Bit 1 - Loop Back enable for 10baseT MCC
+ *
+ *
+ * CSR 12
+ * ------
+ * Bit 25 - Partner can do T4
+ * Bit 24 - Partner can do 100baseTx-FD
+ * Bit 23 - Partner can do 100baseTx-HD
+ * Bit 22 - Partner can do 10baseT-FD
+ * Bit 21 - Partner can do 10baseT-HD
+ * Bit 15 - LPN is 1 if all above bits are valid other wise 0
+ * Bit 14:12 - autonegotiation state (write 001 to start autonegotiate)
+ * Bit 3 - Autopolarity state
+ * Bit 2 - LS10B - link state of 10baseT 0 - good, 1 - failed
+ * Bit 1 - LS100B - link state of 100baseT 0 - good, 1 - failed
+ *
+ *
+ * Data Port Selection Info
+ *-------------------------
+ *
+ * CSR14<7> CSR6<18> CSR6<22> CSR6<23> CSR6<24> MODE/PORT
+ * 1 0 0 (X) 0 (X) 1 NWAY
+ * 0 0 1 0 (X) 0 10baseT
+ * 0 1 0 1 1 (X) 100baseT
+ *
+ *
+ */
+
+
+
+#include "tulip.h"
+#include <linux/delay.h>
+
+
+void pnic2_timer(struct timer_list *t)
+{
+ struct tulip_private *tp = from_timer(tp, t, timer);
+ struct net_device *dev = tp->dev;
+ void __iomem *ioaddr = tp->base_addr;
+ int next_tick = 60*HZ;
+
+ if (tulip_debug > 3)
+ dev_info(&dev->dev, "PNIC2 negotiation status %08x\n",
+ ioread32(ioaddr + CSR12));
+
+ if (next_tick) {
+ mod_timer(&tp->timer, RUN_AT(next_tick));
+ }
+}
+
+
+void pnic2_start_nway(struct net_device *dev)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->base_addr;
+ int csr14;
+ int csr12;
+
+ /* set up what to advertise during the negotiation */
+
+ /* load in csr14 and mask off bits not to touch
+ * comment at top of file explains mask value
+ */
+ csr14 = (ioread32(ioaddr + CSR14) & 0xfff0ee39);
+
+ /* bit 17 - advetise 100baseTx-FD */
+ if (tp->sym_advertise & 0x0100) csr14 |= 0x00020000;
+
+ /* bit 16 - advertise 100baseTx-HD */
+ if (tp->sym_advertise & 0x0080) csr14 |= 0x00010000;
+
+ /* bit 6 - advertise 10baseT-HD */
+ if (tp->sym_advertise & 0x0020) csr14 |= 0x00000040;
+
+ /* Now set bit 12 Link Test Enable, Bit 7 Autonegotiation Enable
+ * and bit 0 Don't PowerDown 10baseT
+ */
+ csr14 |= 0x00001184;
+
+ if (tulip_debug > 1)
+ netdev_dbg(dev, "Restarting PNIC2 autonegotiation, csr14=%08x\n",
+ csr14);
+
+ /* tell pnic2_lnk_change we are doing an nway negotiation */
+ dev->if_port = 0;
+ tp->nway = tp->mediasense = 1;
+ tp->nwayset = tp->lpar = 0;
+
+ /* now we have to set up csr6 for NWAY state */
+
+ tp->csr6 = ioread32(ioaddr + CSR6);
+ if (tulip_debug > 1)
+ netdev_dbg(dev, "On Entry to Nway, csr6=%08x\n", tp->csr6);
+
+ /* mask off any bits not to touch
+ * comment at top of file explains mask value
+ */
+ tp->csr6 = tp->csr6 & 0xfe3bd1fd;
+
+ /* don't forget that bit 9 is also used for advertising */
+ /* advertise 10baseT-FD for the negotiation (bit 9) */
+ if (tp->sym_advertise & 0x0040) tp->csr6 |= 0x00000200;
+
+ /* set bit 24 for nway negotiation mode ...
+ * see Data Port Selection comment at top of file
+ * and "Stop" - reset both Transmit (bit 13) and Receive (bit 1)
+ */
+ tp->csr6 |= 0x01000000;
+ iowrite32(csr14, ioaddr + CSR14);
+ iowrite32(tp->csr6, ioaddr + CSR6);
+ udelay(100);
+
+ /* all set up so now force the negotiation to begin */
+
+ /* read in current values and mask off all but the
+ * Autonegotiation bits 14:12. Writing a 001 to those bits
+ * should start the autonegotiation
+ */
+ csr12 = (ioread32(ioaddr + CSR12) & 0xffff8fff);
+ csr12 |= 0x1000;
+ iowrite32(csr12, ioaddr + CSR12);
+}
+
+
+
+void pnic2_lnk_change(struct net_device *dev, int csr5)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->base_addr;
+ int csr14;
+
+ /* read the staus register to find out what is up */
+ int csr12 = ioread32(ioaddr + CSR12);
+
+ if (tulip_debug > 1)
+ dev_info(&dev->dev,
+ "PNIC2 link status interrupt %08x, CSR5 %x, %08x\n",
+ csr12, csr5, ioread32(ioaddr + CSR14));
+
+ /* If NWay finished and we have a negotiated partner capability.
+ * check bits 14:12 for bit pattern 101 - all is good
+ */
+ if (tp->nway && !tp->nwayset) {
+
+ /* we did an auto negotiation */
+
+ if ((csr12 & 0x7000) == 0x5000) {
+
+ /* negotiation ended successfully */
+
+ /* get the link partners reply and mask out all but
+ * bits 24-21 which show the partners capabilities
+ * and match those to what we advertised
+ *
+ * then begin to interpret the results of the negotiation.
+ * Always go in this order : (we are ignoring T4 for now)
+ * 100baseTx-FD, 100baseTx-HD, 10baseT-FD, 10baseT-HD
+ */
+
+ int negotiated = ((csr12 >> 16) & 0x01E0) & tp->sym_advertise;
+ tp->lpar = (csr12 >> 16);
+ tp->nwayset = 1;
+
+ if (negotiated & 0x0100) dev->if_port = 5;
+ else if (negotiated & 0x0080) dev->if_port = 3;
+ else if (negotiated & 0x0040) dev->if_port = 4;
+ else if (negotiated & 0x0020) dev->if_port = 0;
+ else {
+ if (tulip_debug > 1)
+ dev_info(&dev->dev,
+ "funny autonegotiate result csr12 %08x advertising %04x\n",
+ csr12, tp->sym_advertise);
+ tp->nwayset = 0;
+ /* so check if 100baseTx link state is okay */
+ if ((csr12 & 2) == 0 && (tp->sym_advertise & 0x0180))
+ dev->if_port = 3;
+ }
+
+ /* now record the duplex that was negotiated */
+ tp->full_duplex = 0;
+ if ((dev->if_port == 4) || (dev->if_port == 5))
+ tp->full_duplex = 1;
+
+ if (tulip_debug > 1) {
+ if (tp->nwayset)
+ dev_info(&dev->dev,
+ "Switching to %s based on link negotiation %04x & %04x = %04x\n",
+ medianame[dev->if_port],
+ tp->sym_advertise, tp->lpar,
+ negotiated);
+ }
+
+ /* remember to turn off bit 7 - autonegotiate
+ * enable so we can properly end nway mode and
+ * set duplex (ie. use csr6<9> again)
+ */
+ csr14 = (ioread32(ioaddr + CSR14) & 0xffffff7f);
+ iowrite32(csr14,ioaddr + CSR14);
+
+
+ /* now set the data port and operating mode
+ * (see the Data Port Selection comments at
+ * the top of the file
+ */
+
+ /* get current csr6 and mask off bits not to touch */
+ /* see comment at top of file */
+
+ tp->csr6 = (ioread32(ioaddr + CSR6) & 0xfe3bd1fd);
+
+ /* so if using if_port 3 or 5 then select the 100baseT
+ * port else select the 10baseT port.
+ * See the Data Port Selection table at the top
+ * of the file which was taken from the PNIC_II.PDF
+ * datasheet
+ */
+ if (dev->if_port & 1) tp->csr6 |= 0x01840000;
+ else tp->csr6 |= 0x00400000;
+
+ /* now set the full duplex bit appropriately */
+ if (tp->full_duplex) tp->csr6 |= 0x00000200;
+
+ iowrite32(1, ioaddr + CSR13);
+
+ if (tulip_debug > 2)
+ netdev_dbg(dev, "Setting CSR6 %08x/%x CSR12 %08x\n",
+ tp->csr6,
+ ioread32(ioaddr + CSR6),
+ ioread32(ioaddr + CSR12));
+
+ /* now the following actually writes out the
+ * new csr6 values
+ */
+ tulip_start_rxtx(tp);
+
+ return;
+
+ } else {
+ dev_info(&dev->dev,
+ "Autonegotiation failed, using %s, link beat status %04x\n",
+ medianame[dev->if_port], csr12);
+
+ /* remember to turn off bit 7 - autonegotiate
+ * enable so we don't forget
+ */
+ csr14 = (ioread32(ioaddr + CSR14) & 0xffffff7f);
+ iowrite32(csr14,ioaddr + CSR14);
+
+ /* what should we do when autonegotiate fails?
+ * should we try again or default to baseline
+ * case. I just don't know.
+ *
+ * for now default to some baseline case
+ */
+
+ dev->if_port = 0;
+ tp->nway = 0;
+ tp->nwayset = 1;
+
+ /* set to 10baseTx-HD - see Data Port Selection
+ * comment given at the top of the file
+ */
+ tp->csr6 = (ioread32(ioaddr + CSR6) & 0xfe3bd1fd);
+ tp->csr6 |= 0x00400000;
+
+ tulip_restart_rxtx(tp);
+
+ return;
+
+ }
+ }
+
+ if ((tp->nwayset && (csr5 & 0x08000000) &&
+ (dev->if_port == 3 || dev->if_port == 5) &&
+ (csr12 & 2) == 2) || (tp->nway && (csr5 & (TPLnkFail)))) {
+
+ /* Link blew? Maybe restart NWay. */
+
+ if (tulip_debug > 2)
+ netdev_dbg(dev, "Ugh! Link blew?\n");
+
+ del_timer_sync(&tp->timer);
+ pnic2_start_nway(dev);
+ tp->timer.expires = RUN_AT(3*HZ);
+ add_timer(&tp->timer);
+
+ return;
+ }
+
+
+ if (dev->if_port == 3 || dev->if_port == 5) {
+
+ /* we are at 100mb and a potential link change occurred */
+
+ if (tulip_debug > 1)
+ dev_info(&dev->dev, "PNIC2 %s link beat %s\n",
+ medianame[dev->if_port],
+ (csr12 & 2) ? "failed" : "good");
+
+ /* check 100 link beat */
+
+ tp->nway = 0;
+ tp->nwayset = 1;
+
+ /* if failed then try doing an nway to get in sync */
+ if ((csr12 & 2) && ! tp->medialock) {
+ del_timer_sync(&tp->timer);
+ pnic2_start_nway(dev);
+ tp->timer.expires = RUN_AT(3*HZ);
+ add_timer(&tp->timer);
+ }
+
+ return;
+ }
+
+ if (dev->if_port == 0 || dev->if_port == 4) {
+
+ /* we are at 10mb and a potential link change occurred */
+
+ if (tulip_debug > 1)
+ dev_info(&dev->dev, "PNIC2 %s link beat %s\n",
+ medianame[dev->if_port],
+ (csr12 & 4) ? "failed" : "good");
+
+
+ tp->nway = 0;
+ tp->nwayset = 1;
+
+ /* if failed, try doing an nway to get in sync */
+ if ((csr12 & 4) && ! tp->medialock) {
+ del_timer_sync(&tp->timer);
+ pnic2_start_nway(dev);
+ tp->timer.expires = RUN_AT(3*HZ);
+ add_timer(&tp->timer);
+ }
+
+ return;
+ }
+
+
+ if (tulip_debug > 1)
+ dev_info(&dev->dev, "PNIC2 Link Change Default?\n");
+
+ /* if all else fails default to trying 10baseT-HD */
+ dev->if_port = 0;
+
+ /* make sure autonegotiate enable is off */
+ csr14 = (ioread32(ioaddr + CSR14) & 0xffffff7f);
+ iowrite32(csr14,ioaddr + CSR14);
+
+ /* set to 10baseTx-HD - see Data Port Selection
+ * comment given at the top of the file
+ */
+ tp->csr6 = (ioread32(ioaddr + CSR6) & 0xfe3bd1fd);
+ tp->csr6 |= 0x00400000;
+
+ tulip_restart_rxtx(tp);
+}
+