summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/e1000e/param.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/net/ethernet/intel/e1000e/param.c527
1 files changed, 527 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c
new file mode 100644
index 000000000..3132d8f2f
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/param.c
@@ -0,0 +1,527 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright(c) 1999 - 2018 Intel Corporation. */
+
+#include <linux/netdevice.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#include "e1000.h"
+
+/* This is the only thing that needs to be changed to adjust the
+ * maximum number of ports that the driver can manage.
+ */
+#define E1000_MAX_NIC 32
+
+#define OPTION_UNSET -1
+#define OPTION_DISABLED 0
+#define OPTION_ENABLED 1
+
+#define COPYBREAK_DEFAULT 256
+unsigned int copybreak = COPYBREAK_DEFAULT;
+module_param(copybreak, uint, 0644);
+MODULE_PARM_DESC(copybreak,
+ "Maximum size of packet that is copied to a new buffer on receive");
+
+/* All parameters are treated the same, as an integer array of values.
+ * This macro just reduces the need to repeat the same declaration code
+ * over and over (plus this helps to avoid typo bugs).
+ */
+#define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
+#define E1000_PARAM(X, desc) \
+ static int X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \
+ static unsigned int num_##X; \
+ module_param_array_named(X, X, int, &num_##X, 0); \
+ MODULE_PARM_DESC(X, desc);
+
+/* Transmit Interrupt Delay in units of 1.024 microseconds
+ * Tx interrupt delay needs to typically be set to something non-zero
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay");
+#define DEFAULT_TIDV 8
+#define MAX_TXDELAY 0xFFFF
+#define MIN_TXDELAY 0
+
+/* Transmit Absolute Interrupt Delay in units of 1.024 microseconds
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay");
+#define DEFAULT_TADV 32
+#define MAX_TXABSDELAY 0xFFFF
+#define MIN_TXABSDELAY 0
+
+/* Receive Interrupt Delay in units of 1.024 microseconds
+ * hardware will likely hang if you set this to anything but zero.
+ *
+ * Burst variant is used as default if device has FLAG2_DMA_BURST.
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");
+#define DEFAULT_RDTR 0
+#define BURST_RDTR 0x20
+#define MAX_RXDELAY 0xFFFF
+#define MIN_RXDELAY 0
+
+/* Receive Absolute Interrupt Delay in units of 1.024 microseconds
+ *
+ * Burst variant is used as default if device has FLAG2_DMA_BURST.
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
+#define DEFAULT_RADV 8
+#define BURST_RADV 0x20
+#define MAX_RXABSDELAY 0xFFFF
+#define MIN_RXABSDELAY 0
+
+/* Interrupt Throttle Rate (interrupts/sec)
+ *
+ * Valid Range: 100-100000 or one of: 0=off, 1=dynamic, 3=dynamic conservative
+ */
+E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
+#define DEFAULT_ITR 3
+#define MAX_ITR 100000
+#define MIN_ITR 100
+
+/* IntMode (Interrupt Mode)
+ *
+ * Valid Range: varies depending on kernel configuration & hardware support
+ *
+ * legacy=0, MSI=1, MSI-X=2
+ *
+ * When MSI/MSI-X support is enabled in kernel-
+ * Default Value: 2 (MSI-X) when supported by hardware, 1 (MSI) otherwise
+ * When MSI/MSI-X support is not enabled in kernel-
+ * Default Value: 0 (legacy)
+ *
+ * When a mode is specified that is not allowed/supported, it will be
+ * demoted to the most advanced interrupt mode available.
+ */
+E1000_PARAM(IntMode, "Interrupt Mode");
+
+/* Enable Smart Power Down of the PHY
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 0 (disabled)
+ */
+E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
+
+/* Enable Kumeran Lock Loss workaround
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 1 (enabled)
+ */
+E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
+
+/* Write Protect NVM
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 1 (enabled)
+ */
+E1000_PARAM(WriteProtectNVM,
+ "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]");
+
+/* Enable CRC Stripping
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 1 (enabled)
+ */
+E1000_PARAM(CrcStripping,
+ "Enable CRC Stripping, disable if your BMC needs the CRC");
+
+struct e1000_option {
+ enum { enable_option, range_option, list_option } type;
+ const char *name;
+ const char *err;
+ int def;
+ union {
+ /* range_option info */
+ struct {
+ int min;
+ int max;
+ } r;
+ /* list_option info */
+ struct {
+ int nr;
+ struct e1000_opt_list {
+ int i;
+ char *str;
+ } *p;
+ } l;
+ } arg;
+};
+
+static int e1000_validate_option(unsigned int *value,
+ const struct e1000_option *opt,
+ struct e1000_adapter *adapter)
+{
+ if (*value == OPTION_UNSET) {
+ *value = opt->def;
+ return 0;
+ }
+
+ switch (opt->type) {
+ case enable_option:
+ switch (*value) {
+ case OPTION_ENABLED:
+ dev_info(&adapter->pdev->dev, "%s Enabled\n",
+ opt->name);
+ return 0;
+ case OPTION_DISABLED:
+ dev_info(&adapter->pdev->dev, "%s Disabled\n",
+ opt->name);
+ return 0;
+ }
+ break;
+ case range_option:
+ if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
+ dev_info(&adapter->pdev->dev, "%s set to %i\n",
+ opt->name, *value);
+ return 0;
+ }
+ break;
+ case list_option: {
+ int i;
+ struct e1000_opt_list *ent;
+
+ for (i = 0; i < opt->arg.l.nr; i++) {
+ ent = &opt->arg.l.p[i];
+ if (*value == ent->i) {
+ if (ent->str[0] != '\0')
+ dev_info(&adapter->pdev->dev, "%s\n",
+ ent->str);
+ return 0;
+ }
+ }
+ }
+ break;
+ default:
+ BUG();
+ }
+
+ dev_info(&adapter->pdev->dev, "Invalid %s value specified (%i) %s\n",
+ opt->name, *value, opt->err);
+ *value = opt->def;
+ return -1;
+}
+
+/**
+ * e1000e_check_options - Range Checking for Command Line Parameters
+ * @adapter: board private structure
+ *
+ * This routine checks all command line parameters for valid user
+ * input. If an invalid value is given, or if no user specified
+ * value exists, a default value is used. The final value is stored
+ * in a variable in the adapter structure.
+ **/
+void e1000e_check_options(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int bd = adapter->bd_number;
+
+ if (bd >= E1000_MAX_NIC) {
+ dev_notice(&adapter->pdev->dev,
+ "Warning: no configuration for board #%i\n", bd);
+ dev_notice(&adapter->pdev->dev,
+ "Using defaults for all values\n");
+ }
+
+ /* Transmit Interrupt Delay */
+ {
+ static const struct e1000_option opt = {
+ .type = range_option,
+ .name = "Transmit Interrupt Delay",
+ .err = "using default of "
+ __MODULE_STRING(DEFAULT_TIDV),
+ .def = DEFAULT_TIDV,
+ .arg = { .r = { .min = MIN_TXDELAY,
+ .max = MAX_TXDELAY } }
+ };
+
+ if (num_TxIntDelay > bd) {
+ adapter->tx_int_delay = TxIntDelay[bd];
+ e1000_validate_option(&adapter->tx_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->tx_int_delay = opt.def;
+ }
+ }
+ /* Transmit Absolute Interrupt Delay */
+ {
+ static const struct e1000_option opt = {
+ .type = range_option,
+ .name = "Transmit Absolute Interrupt Delay",
+ .err = "using default of "
+ __MODULE_STRING(DEFAULT_TADV),
+ .def = DEFAULT_TADV,
+ .arg = { .r = { .min = MIN_TXABSDELAY,
+ .max = MAX_TXABSDELAY } }
+ };
+
+ if (num_TxAbsIntDelay > bd) {
+ adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
+ e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->tx_abs_int_delay = opt.def;
+ }
+ }
+ /* Receive Interrupt Delay */
+ {
+ static struct e1000_option opt = {
+ .type = range_option,
+ .name = "Receive Interrupt Delay",
+ .err = "using default of "
+ __MODULE_STRING(DEFAULT_RDTR),
+ .def = DEFAULT_RDTR,
+ .arg = { .r = { .min = MIN_RXDELAY,
+ .max = MAX_RXDELAY } }
+ };
+
+ if (adapter->flags2 & FLAG2_DMA_BURST)
+ opt.def = BURST_RDTR;
+
+ if (num_RxIntDelay > bd) {
+ adapter->rx_int_delay = RxIntDelay[bd];
+ e1000_validate_option(&adapter->rx_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->rx_int_delay = opt.def;
+ }
+ }
+ /* Receive Absolute Interrupt Delay */
+ {
+ static struct e1000_option opt = {
+ .type = range_option,
+ .name = "Receive Absolute Interrupt Delay",
+ .err = "using default of "
+ __MODULE_STRING(DEFAULT_RADV),
+ .def = DEFAULT_RADV,
+ .arg = { .r = { .min = MIN_RXABSDELAY,
+ .max = MAX_RXABSDELAY } }
+ };
+
+ if (adapter->flags2 & FLAG2_DMA_BURST)
+ opt.def = BURST_RADV;
+
+ if (num_RxAbsIntDelay > bd) {
+ adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
+ e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->rx_abs_int_delay = opt.def;
+ }
+ }
+ /* Interrupt Throttling Rate */
+ {
+ static const struct e1000_option opt = {
+ .type = range_option,
+ .name = "Interrupt Throttling Rate (ints/sec)",
+ .err = "using default of "
+ __MODULE_STRING(DEFAULT_ITR),
+ .def = DEFAULT_ITR,
+ .arg = { .r = { .min = MIN_ITR,
+ .max = MAX_ITR } }
+ };
+
+ if (num_InterruptThrottleRate > bd) {
+ adapter->itr = InterruptThrottleRate[bd];
+
+ /* Make sure a message is printed for non-special
+ * values. And in case of an invalid option, display
+ * warning, use default and go through itr/itr_setting
+ * adjustment logic below
+ */
+ if ((adapter->itr > 4) &&
+ e1000_validate_option(&adapter->itr, &opt, adapter))
+ adapter->itr = opt.def;
+ } else {
+ /* If no option specified, use default value and go
+ * through the logic below to adjust itr/itr_setting
+ */
+ adapter->itr = opt.def;
+
+ /* Make sure a message is printed for non-special
+ * default values
+ */
+ if (adapter->itr > 4)
+ dev_info(&adapter->pdev->dev,
+ "%s set to default %d\n", opt.name,
+ adapter->itr);
+ }
+
+ adapter->itr_setting = adapter->itr;
+ switch (adapter->itr) {
+ case 0:
+ dev_info(&adapter->pdev->dev, "%s turned off\n",
+ opt.name);
+ break;
+ case 1:
+ dev_info(&adapter->pdev->dev,
+ "%s set to dynamic mode\n", opt.name);
+ adapter->itr = 20000;
+ break;
+ case 2:
+ dev_info(&adapter->pdev->dev,
+ "%s Invalid mode - setting default\n",
+ opt.name);
+ adapter->itr_setting = opt.def;
+ fallthrough;
+ case 3:
+ dev_info(&adapter->pdev->dev,
+ "%s set to dynamic conservative mode\n",
+ opt.name);
+ adapter->itr = 20000;
+ break;
+ case 4:
+ dev_info(&adapter->pdev->dev,
+ "%s set to simplified (2000-8000 ints) mode\n",
+ opt.name);
+ break;
+ default:
+ /* Save the setting, because the dynamic bits
+ * change itr.
+ *
+ * Clear the lower two bits because
+ * they are used as control.
+ */
+ adapter->itr_setting &= ~3;
+ break;
+ }
+ }
+ /* Interrupt Mode */
+ {
+ static struct e1000_option opt = {
+ .type = range_option,
+ .name = "Interrupt Mode",
+#ifndef CONFIG_PCI_MSI
+ .err = "defaulting to 0 (legacy)",
+ .def = E1000E_INT_MODE_LEGACY,
+ .arg = { .r = { .min = 0,
+ .max = 0 } }
+#endif
+ };
+
+#ifdef CONFIG_PCI_MSI
+ if (adapter->flags & FLAG_HAS_MSIX) {
+ opt.err = kstrdup("defaulting to 2 (MSI-X)",
+ GFP_KERNEL);
+ opt.def = E1000E_INT_MODE_MSIX;
+ opt.arg.r.max = E1000E_INT_MODE_MSIX;
+ } else {
+ opt.err = kstrdup("defaulting to 1 (MSI)", GFP_KERNEL);
+ opt.def = E1000E_INT_MODE_MSI;
+ opt.arg.r.max = E1000E_INT_MODE_MSI;
+ }
+
+ if (!opt.err) {
+ dev_err(&adapter->pdev->dev,
+ "Failed to allocate memory\n");
+ return;
+ }
+#endif
+
+ if (num_IntMode > bd) {
+ unsigned int int_mode = IntMode[bd];
+
+ e1000_validate_option(&int_mode, &opt, adapter);
+ adapter->int_mode = int_mode;
+ } else {
+ adapter->int_mode = opt.def;
+ }
+
+#ifdef CONFIG_PCI_MSI
+ kfree(opt.err);
+#endif
+ }
+ /* Smart Power Down */
+ {
+ static const struct e1000_option opt = {
+ .type = enable_option,
+ .name = "PHY Smart Power Down",
+ .err = "defaulting to Disabled",
+ .def = OPTION_DISABLED
+ };
+
+ if (num_SmartPowerDownEnable > bd) {
+ unsigned int spd = SmartPowerDownEnable[bd];
+
+ e1000_validate_option(&spd, &opt, adapter);
+ if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) && spd)
+ adapter->flags |= FLAG_SMART_POWER_DOWN;
+ }
+ }
+ /* CRC Stripping */
+ {
+ static const struct e1000_option opt = {
+ .type = enable_option,
+ .name = "CRC Stripping",
+ .err = "defaulting to Enabled",
+ .def = OPTION_ENABLED
+ };
+
+ if (num_CrcStripping > bd) {
+ unsigned int crc_stripping = CrcStripping[bd];
+
+ e1000_validate_option(&crc_stripping, &opt, adapter);
+ if (crc_stripping == OPTION_ENABLED) {
+ adapter->flags2 |= FLAG2_CRC_STRIPPING;
+ adapter->flags2 |= FLAG2_DFLT_CRC_STRIPPING;
+ }
+ } else {
+ adapter->flags2 |= FLAG2_CRC_STRIPPING;
+ adapter->flags2 |= FLAG2_DFLT_CRC_STRIPPING;
+ }
+ }
+ /* Kumeran Lock Loss Workaround */
+ {
+ static const struct e1000_option opt = {
+ .type = enable_option,
+ .name = "Kumeran Lock Loss Workaround",
+ .err = "defaulting to Enabled",
+ .def = OPTION_ENABLED
+ };
+ bool enabled = opt.def;
+
+ if (num_KumeranLockLoss > bd) {
+ unsigned int kmrn_lock_loss = KumeranLockLoss[bd];
+
+ e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
+ enabled = kmrn_lock_loss;
+ }
+
+ if (hw->mac.type == e1000_ich8lan)
+ e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
+ enabled);
+ }
+ /* Write-protect NVM */
+ {
+ static const struct e1000_option opt = {
+ .type = enable_option,
+ .name = "Write-protect NVM",
+ .err = "defaulting to Enabled",
+ .def = OPTION_ENABLED
+ };
+
+ if (adapter->flags & FLAG_IS_ICH) {
+ if (num_WriteProtectNVM > bd) {
+ unsigned int write_protect_nvm =
+ WriteProtectNVM[bd];
+ e1000_validate_option(&write_protect_nvm, &opt,
+ adapter);
+ if (write_protect_nvm)
+ adapter->flags |= FLAG_READ_ONLY_NVM;
+ } else {
+ if (opt.def)
+ adapter->flags |= FLAG_READ_ONLY_NVM;
+ }
+ }
+ }
+}