summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/natsemi/macsonic.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/natsemi/macsonic.c')
-rw-r--r--drivers/net/ethernet/natsemi/macsonic.c651
1 files changed, 651 insertions, 0 deletions
diff --git a/drivers/net/ethernet/natsemi/macsonic.c b/drivers/net/ethernet/natsemi/macsonic.c
new file mode 100644
index 000000000..b16f7c830
--- /dev/null
+++ b/drivers/net/ethernet/natsemi/macsonic.c
@@ -0,0 +1,651 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * macsonic.c
+ *
+ * (C) 2005 Finn Thain
+ *
+ * Converted to DMA API, converted to unified driver model, made it work as
+ * a module again, and from the mac68k project, introduced more 32-bit cards
+ * and dhd's support for 16-bit cards.
+ *
+ * (C) 1998 Alan Cox
+ *
+ * Debugging Andreas Ehliar, Michael Schmitz
+ *
+ * Based on code
+ * (C) 1996 by Thomas Bogendoerfer (tsbogend@bigbug.franken.de)
+ *
+ * This driver is based on work from Andreas Busse, but most of
+ * the code is rewritten.
+ *
+ * (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de)
+ *
+ * A driver for the Mac onboard Sonic ethernet chip.
+ *
+ * 98/12/21 MSch: judged from tests on Q800, it's basically working,
+ * but eating up both receive and transmit resources
+ * and duplicating packets. Needs more testing.
+ *
+ * 99/01/03 MSch: upgraded to version 0.92 of the core driver, fixed.
+ *
+ * 00/10/31 sammy@oh.verio.com: Updated driver for 2.4 kernels, fixed problems
+ * on centris.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/gfp.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/nubus.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/bitrev.h>
+#include <linux/slab.h>
+#include <linux/pgtable.h>
+
+#include <asm/io.h>
+#include <asm/hwtest.h>
+#include <asm/dma.h>
+#include <asm/macintosh.h>
+#include <asm/macints.h>
+#include <asm/mac_via.h>
+
+#include "sonic.h"
+
+/* These should basically be bus-size and endian independent (since
+ the SONIC is at least smart enough that it uses the same endianness
+ as the host, unlike certain less enlightened Macintosh NICs) */
+#define SONIC_READ(reg) (nubus_readw(dev->base_addr + (reg * 4) \
+ + lp->reg_offset))
+#define SONIC_WRITE(reg,val) (nubus_writew(val, dev->base_addr + (reg * 4) \
+ + lp->reg_offset))
+
+/* For onboard SONIC */
+#define ONBOARD_SONIC_REGISTERS 0x50F0A000
+#define ONBOARD_SONIC_PROM_BASE 0x50f08000
+
+enum macsonic_type {
+ MACSONIC_DUODOCK,
+ MACSONIC_APPLE,
+ MACSONIC_APPLE16,
+ MACSONIC_DAYNA,
+ MACSONIC_DAYNALINK
+};
+
+/* For the built-in SONIC in the Duo Dock */
+#define DUODOCK_SONIC_REGISTERS 0xe10000
+#define DUODOCK_SONIC_PROM_BASE 0xe12000
+
+/* For Apple-style NuBus SONIC */
+#define APPLE_SONIC_REGISTERS 0
+#define APPLE_SONIC_PROM_BASE 0x40000
+
+/* Daynalink LC SONIC */
+#define DAYNALINK_PROM_BASE 0x400000
+
+/* For Dayna-style NuBus SONIC (haven't seen one yet) */
+#define DAYNA_SONIC_REGISTERS 0x180000
+/* This is what OpenBSD says. However, this is definitely in NuBus
+ ROM space so we should be able to get it by walking the NuBus
+ resource directories */
+#define DAYNA_SONIC_MAC_ADDR 0xffe004
+
+#define SONIC_READ_PROM(addr) nubus_readb(prom_addr+addr)
+
+/*
+ * For reversing the PROM address
+ */
+
+static inline void bit_reverse_addr(unsigned char addr[6])
+{
+ int i;
+
+ for(i = 0; i < 6; i++)
+ addr[i] = bitrev8(addr[i]);
+}
+
+static int macsonic_open(struct net_device* dev)
+{
+ int retval;
+
+ retval = request_irq(dev->irq, sonic_interrupt, 0, "sonic", dev);
+ if (retval) {
+ printk(KERN_ERR "%s: unable to get IRQ %d.\n",
+ dev->name, dev->irq);
+ goto err;
+ }
+ /* Under the A/UX interrupt scheme, the onboard SONIC interrupt gets
+ * moved from level 2 to level 3. Unfortunately we still get some
+ * level 2 interrupts so register the handler for both.
+ */
+ if (dev->irq == IRQ_AUTO_3) {
+ retval = request_irq(IRQ_NUBUS_9, sonic_interrupt, 0,
+ "sonic", dev);
+ if (retval) {
+ printk(KERN_ERR "%s: unable to get IRQ %d.\n",
+ dev->name, IRQ_NUBUS_9);
+ goto err_irq;
+ }
+ }
+ retval = sonic_open(dev);
+ if (retval)
+ goto err_irq_nubus;
+ return 0;
+
+err_irq_nubus:
+ if (dev->irq == IRQ_AUTO_3)
+ free_irq(IRQ_NUBUS_9, dev);
+err_irq:
+ free_irq(dev->irq, dev);
+err:
+ return retval;
+}
+
+static int macsonic_close(struct net_device* dev)
+{
+ int err;
+ err = sonic_close(dev);
+ free_irq(dev->irq, dev);
+ if (dev->irq == IRQ_AUTO_3)
+ free_irq(IRQ_NUBUS_9, dev);
+ return err;
+}
+
+static const struct net_device_ops macsonic_netdev_ops = {
+ .ndo_open = macsonic_open,
+ .ndo_stop = macsonic_close,
+ .ndo_start_xmit = sonic_send_packet,
+ .ndo_set_rx_mode = sonic_multicast_list,
+ .ndo_tx_timeout = sonic_tx_timeout,
+ .ndo_get_stats = sonic_get_stats,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = eth_mac_addr,
+};
+
+static int macsonic_init(struct net_device *dev)
+{
+ struct sonic_local* lp = netdev_priv(dev);
+ int err = sonic_alloc_descriptors(dev);
+
+ if (err)
+ return err;
+
+ dev->netdev_ops = &macsonic_netdev_ops;
+ dev->watchdog_timeo = TX_TIMEOUT;
+
+ /*
+ * clear tally counter
+ */
+ SONIC_WRITE(SONIC_CRCT, 0xffff);
+ SONIC_WRITE(SONIC_FAET, 0xffff);
+ SONIC_WRITE(SONIC_MPT, 0xffff);
+
+ return 0;
+}
+
+#define INVALID_MAC(mac) (memcmp(mac, "\x08\x00\x07", 3) && \
+ memcmp(mac, "\x00\xA0\x40", 3) && \
+ memcmp(mac, "\x00\x80\x19", 3) && \
+ memcmp(mac, "\x00\x05\x02", 3))
+
+static void mac_onboard_sonic_ethernet_addr(struct net_device *dev)
+{
+ struct sonic_local *lp = netdev_priv(dev);
+ const int prom_addr = ONBOARD_SONIC_PROM_BASE;
+ unsigned short val;
+ u8 addr[ETH_ALEN];
+
+ /*
+ * On NuBus boards we can sometimes look in the ROM resources.
+ * No such luck for comm-slot/onboard.
+ * On the PowerBook 520, the PROM base address is a mystery.
+ */
+ if (hwreg_present((void *)prom_addr)) {
+ int i;
+
+ for (i = 0; i < 6; i++)
+ addr[i] = SONIC_READ_PROM(i);
+ eth_hw_addr_set(dev, addr);
+ if (!INVALID_MAC(dev->dev_addr))
+ return;
+
+ /*
+ * Most of the time, the address is bit-reversed. The NetBSD
+ * source has a rather long and detailed historical account of
+ * why this is so.
+ */
+ bit_reverse_addr(addr);
+ eth_hw_addr_set(dev, addr);
+ if (!INVALID_MAC(dev->dev_addr))
+ return;
+
+ /*
+ * If we still have what seems to be a bogus address, we'll
+ * look in the CAM. The top entry should be ours.
+ */
+ printk(KERN_WARNING "macsonic: MAC address in PROM seems "
+ "to be invalid, trying CAM\n");
+ } else {
+ printk(KERN_WARNING "macsonic: cannot read MAC address from "
+ "PROM, trying CAM\n");
+ }
+
+ /* This only works if MacOS has already initialized the card. */
+
+ SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
+ SONIC_WRITE(SONIC_CEP, 15);
+
+ val = SONIC_READ(SONIC_CAP2);
+ addr[5] = val >> 8;
+ addr[4] = val & 0xff;
+ val = SONIC_READ(SONIC_CAP1);
+ addr[3] = val >> 8;
+ addr[2] = val & 0xff;
+ val = SONIC_READ(SONIC_CAP0);
+ addr[1] = val >> 8;
+ addr[0] = val & 0xff;
+ eth_hw_addr_set(dev, addr);
+
+ if (!INVALID_MAC(dev->dev_addr))
+ return;
+
+ /* Still nonsense ... messed up someplace! */
+
+ printk(KERN_WARNING "macsonic: MAC address in CAM entry 15 "
+ "seems invalid, will use a random MAC\n");
+ eth_hw_addr_random(dev);
+}
+
+static int mac_onboard_sonic_probe(struct net_device *dev)
+{
+ struct sonic_local* lp = netdev_priv(dev);
+ int sr;
+ bool commslot = macintosh_config->expansion_type == MAC_EXP_PDS_COMM;
+
+ /* Bogus probing, on the models which may or may not have
+ Ethernet (BTW, the Ethernet *is* always at the same
+ address, and nothing else lives there, at least if Apple's
+ documentation is to be believed) */
+ if (commslot || macintosh_config->ident == MAC_MODEL_C610) {
+ int card_present;
+
+ card_present = hwreg_present((void*)ONBOARD_SONIC_REGISTERS);
+ if (!card_present) {
+ pr_info("Onboard/comm-slot SONIC not found\n");
+ return -ENODEV;
+ }
+ }
+
+ /* Danger! My arms are flailing wildly! You *must* set lp->reg_offset
+ * and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */
+ dev->base_addr = ONBOARD_SONIC_REGISTERS;
+ if (via_alt_mapping)
+ dev->irq = IRQ_AUTO_3;
+ else
+ dev->irq = IRQ_NUBUS_9;
+
+ /* The PowerBook's SONIC is 16 bit always. */
+ if (macintosh_config->ident == MAC_MODEL_PB520) {
+ lp->reg_offset = 0;
+ lp->dma_bitmode = SONIC_BITMODE16;
+ } else if (commslot) {
+ /* Some of the comm-slot cards are 16 bit. But some
+ of them are not. The 32-bit cards use offset 2 and
+ have known revisions, we try reading the revision
+ register at offset 2, if we don't get a known revision
+ we assume 16 bit at offset 0. */
+ lp->reg_offset = 2;
+ lp->dma_bitmode = SONIC_BITMODE16;
+
+ sr = SONIC_READ(SONIC_SR);
+ if (sr == 0x0004 || sr == 0x0006 || sr == 0x0100 || sr == 0x0101)
+ /* 83932 is 0x0004 or 0x0006, 83934 is 0x0100 or 0x0101 */
+ lp->dma_bitmode = SONIC_BITMODE32;
+ else {
+ lp->dma_bitmode = SONIC_BITMODE16;
+ lp->reg_offset = 0;
+ }
+ } else {
+ /* All onboard cards are at offset 2 with 32 bit DMA. */
+ lp->reg_offset = 2;
+ lp->dma_bitmode = SONIC_BITMODE32;
+ }
+
+ pr_info("Onboard/comm-slot SONIC, revision 0x%04x, %d bit DMA, register offset %d\n",
+ SONIC_READ(SONIC_SR), lp->dma_bitmode ? 32 : 16,
+ lp->reg_offset);
+
+ /* This is sometimes useful to find out how MacOS configured the card */
+ pr_debug("%s: DCR=0x%04x, DCR2=0x%04x\n", __func__,
+ SONIC_READ(SONIC_DCR) & 0xffff,
+ SONIC_READ(SONIC_DCR2) & 0xffff);
+
+ /* Software reset, then initialize control registers. */
+ SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
+
+ SONIC_WRITE(SONIC_DCR, SONIC_DCR_EXBUS | SONIC_DCR_BMS |
+ SONIC_DCR_RFT1 | SONIC_DCR_TFT0 |
+ (lp->dma_bitmode ? SONIC_DCR_DW : 0));
+
+ /* This *must* be written back to in order to restore the
+ * extended programmable output bits, as it may not have been
+ * initialised since the hardware reset. */
+ SONIC_WRITE(SONIC_DCR2, 0);
+
+ /* Clear *and* disable interrupts to be on the safe side */
+ SONIC_WRITE(SONIC_IMR, 0);
+ SONIC_WRITE(SONIC_ISR, 0x7fff);
+
+ /* Now look for the MAC address. */
+ mac_onboard_sonic_ethernet_addr(dev);
+
+ pr_info("SONIC ethernet @%08lx, MAC %pM, IRQ %d\n",
+ dev->base_addr, dev->dev_addr, dev->irq);
+
+ /* Shared init code */
+ return macsonic_init(dev);
+}
+
+static int mac_sonic_nubus_ethernet_addr(struct net_device *dev,
+ unsigned long prom_addr, int id)
+{
+ u8 addr[ETH_ALEN];
+ int i;
+
+ for(i = 0; i < 6; i++)
+ addr[i] = SONIC_READ_PROM(i);
+
+ /* Some of the addresses are bit-reversed */
+ if (id != MACSONIC_DAYNA)
+ bit_reverse_addr(addr);
+ eth_hw_addr_set(dev, addr);
+
+ return 0;
+}
+
+static int macsonic_ident(struct nubus_rsrc *fres)
+{
+ if (fres->dr_hw == NUBUS_DRHW_ASANTE_LC &&
+ fres->dr_sw == NUBUS_DRSW_SONIC_LC)
+ return MACSONIC_DAYNALINK;
+ if (fres->dr_hw == NUBUS_DRHW_SONIC &&
+ fres->dr_sw == NUBUS_DRSW_APPLE) {
+ /* There has to be a better way to do this... */
+ if (strstr(fres->board->name, "DuoDock"))
+ return MACSONIC_DUODOCK;
+ else
+ return MACSONIC_APPLE;
+ }
+
+ if (fres->dr_hw == NUBUS_DRHW_SMC9194 &&
+ fres->dr_sw == NUBUS_DRSW_DAYNA)
+ return MACSONIC_DAYNA;
+
+ if (fres->dr_hw == NUBUS_DRHW_APPLE_SONIC_LC &&
+ fres->dr_sw == 0) { /* huh? */
+ return MACSONIC_APPLE16;
+ }
+ return -1;
+}
+
+static int mac_sonic_nubus_probe_board(struct nubus_board *board, int id,
+ struct net_device *dev)
+{
+ struct sonic_local* lp = netdev_priv(dev);
+ unsigned long base_addr, prom_addr;
+ u16 sonic_dcr;
+ int reg_offset, dma_bitmode;
+
+ switch (id) {
+ case MACSONIC_DUODOCK:
+ base_addr = board->slot_addr + DUODOCK_SONIC_REGISTERS;
+ prom_addr = board->slot_addr + DUODOCK_SONIC_PROM_BASE;
+ sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT0 | SONIC_DCR_RFT1 |
+ SONIC_DCR_TFT0;
+ reg_offset = 2;
+ dma_bitmode = SONIC_BITMODE32;
+ break;
+ case MACSONIC_APPLE:
+ base_addr = board->slot_addr + APPLE_SONIC_REGISTERS;
+ prom_addr = board->slot_addr + APPLE_SONIC_PROM_BASE;
+ sonic_dcr = SONIC_DCR_BMS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0;
+ reg_offset = 0;
+ dma_bitmode = SONIC_BITMODE32;
+ break;
+ case MACSONIC_APPLE16:
+ base_addr = board->slot_addr + APPLE_SONIC_REGISTERS;
+ prom_addr = board->slot_addr + APPLE_SONIC_PROM_BASE;
+ sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0 |
+ SONIC_DCR_PO1 | SONIC_DCR_BMS;
+ reg_offset = 0;
+ dma_bitmode = SONIC_BITMODE16;
+ break;
+ case MACSONIC_DAYNALINK:
+ base_addr = board->slot_addr + APPLE_SONIC_REGISTERS;
+ prom_addr = board->slot_addr + DAYNALINK_PROM_BASE;
+ sonic_dcr = SONIC_DCR_RFT1 | SONIC_DCR_TFT0 |
+ SONIC_DCR_PO1 | SONIC_DCR_BMS;
+ reg_offset = 0;
+ dma_bitmode = SONIC_BITMODE16;
+ break;
+ case MACSONIC_DAYNA:
+ base_addr = board->slot_addr + DAYNA_SONIC_REGISTERS;
+ prom_addr = board->slot_addr + DAYNA_SONIC_MAC_ADDR;
+ sonic_dcr = SONIC_DCR_BMS |
+ SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | SONIC_DCR_PO1;
+ reg_offset = 0;
+ dma_bitmode = SONIC_BITMODE16;
+ break;
+ default:
+ printk(KERN_ERR "macsonic: WTF, id is %d\n", id);
+ return -ENODEV;
+ }
+
+ /* Danger! My arms are flailing wildly! You *must* set lp->reg_offset
+ * and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */
+ dev->base_addr = base_addr;
+ lp->reg_offset = reg_offset;
+ lp->dma_bitmode = dma_bitmode;
+ dev->irq = SLOT2IRQ(board->slot);
+
+ dev_info(&board->dev, "%s, revision 0x%04x, %d bit DMA, register offset %d\n",
+ board->name, SONIC_READ(SONIC_SR),
+ lp->dma_bitmode ? 32 : 16, lp->reg_offset);
+
+ /* This is sometimes useful to find out how MacOS configured the card */
+ dev_dbg(&board->dev, "%s: DCR=0x%04x, DCR2=0x%04x\n", __func__,
+ SONIC_READ(SONIC_DCR) & 0xffff,
+ SONIC_READ(SONIC_DCR2) & 0xffff);
+
+ /* Software reset, then initialize control registers. */
+ SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
+ SONIC_WRITE(SONIC_DCR, sonic_dcr | (dma_bitmode ? SONIC_DCR_DW : 0));
+ /* This *must* be written back to in order to restore the
+ * extended programmable output bits, since it may not have been
+ * initialised since the hardware reset. */
+ SONIC_WRITE(SONIC_DCR2, 0);
+
+ /* Clear *and* disable interrupts to be on the safe side */
+ SONIC_WRITE(SONIC_IMR, 0);
+ SONIC_WRITE(SONIC_ISR, 0x7fff);
+
+ /* Now look for the MAC address. */
+ if (mac_sonic_nubus_ethernet_addr(dev, prom_addr, id) != 0)
+ return -ENODEV;
+
+ dev_info(&board->dev, "SONIC ethernet @%08lx, MAC %pM, IRQ %d\n",
+ dev->base_addr, dev->dev_addr, dev->irq);
+
+ /* Shared init code */
+ return macsonic_init(dev);
+}
+
+static int mac_sonic_platform_probe(struct platform_device *pdev)
+{
+ struct net_device *dev;
+ struct sonic_local *lp;
+ int err;
+
+ dev = alloc_etherdev(sizeof(struct sonic_local));
+ if (!dev)
+ return -ENOMEM;
+
+ lp = netdev_priv(dev);
+ lp->device = &pdev->dev;
+ SET_NETDEV_DEV(dev, &pdev->dev);
+ platform_set_drvdata(pdev, dev);
+
+ err = mac_onboard_sonic_probe(dev);
+ if (err)
+ goto out;
+
+ sonic_msg_init(dev);
+
+ err = register_netdev(dev);
+ if (err)
+ goto undo_probe;
+
+ return 0;
+
+undo_probe:
+ dma_free_coherent(lp->device,
+ SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+ lp->descriptors, lp->descriptors_laddr);
+out:
+ free_netdev(dev);
+
+ return err;
+}
+
+MODULE_DESCRIPTION("Macintosh SONIC ethernet driver");
+MODULE_ALIAS("platform:macsonic");
+
+#include "sonic.c"
+
+static int mac_sonic_platform_remove(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct sonic_local* lp = netdev_priv(dev);
+
+ unregister_netdev(dev);
+ dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+ lp->descriptors, lp->descriptors_laddr);
+ free_netdev(dev);
+
+ return 0;
+}
+
+static struct platform_driver mac_sonic_platform_driver = {
+ .probe = mac_sonic_platform_probe,
+ .remove = mac_sonic_platform_remove,
+ .driver = {
+ .name = "macsonic",
+ },
+};
+
+static int mac_sonic_nubus_probe(struct nubus_board *board)
+{
+ struct net_device *ndev;
+ struct sonic_local *lp;
+ struct nubus_rsrc *fres;
+ int id = -1;
+ int err;
+
+ /* The platform driver will handle a PDS or Comm Slot card (even if
+ * it has a pseudoslot declaration ROM).
+ */
+ if (macintosh_config->expansion_type == MAC_EXP_PDS_COMM)
+ return -ENODEV;
+
+ for_each_board_func_rsrc(board, fres) {
+ if (fres->category != NUBUS_CAT_NETWORK ||
+ fres->type != NUBUS_TYPE_ETHERNET)
+ continue;
+
+ id = macsonic_ident(fres);
+ if (id != -1)
+ break;
+ }
+ if (!fres)
+ return -ENODEV;
+
+ ndev = alloc_etherdev(sizeof(struct sonic_local));
+ if (!ndev)
+ return -ENOMEM;
+
+ lp = netdev_priv(ndev);
+ lp->device = &board->dev;
+ SET_NETDEV_DEV(ndev, &board->dev);
+
+ err = mac_sonic_nubus_probe_board(board, id, ndev);
+ if (err)
+ goto out;
+
+ sonic_msg_init(ndev);
+
+ err = register_netdev(ndev);
+ if (err)
+ goto undo_probe;
+
+ nubus_set_drvdata(board, ndev);
+
+ return 0;
+
+undo_probe:
+ dma_free_coherent(lp->device,
+ SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+ lp->descriptors, lp->descriptors_laddr);
+out:
+ free_netdev(ndev);
+ return err;
+}
+
+static void mac_sonic_nubus_remove(struct nubus_board *board)
+{
+ struct net_device *ndev = nubus_get_drvdata(board);
+ struct sonic_local *lp = netdev_priv(ndev);
+
+ unregister_netdev(ndev);
+ dma_free_coherent(lp->device,
+ SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+ lp->descriptors, lp->descriptors_laddr);
+ free_netdev(ndev);
+}
+
+static struct nubus_driver mac_sonic_nubus_driver = {
+ .probe = mac_sonic_nubus_probe,
+ .remove = mac_sonic_nubus_remove,
+ .driver = {
+ .name = "macsonic-nubus",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int perr, nerr;
+
+static int __init mac_sonic_init(void)
+{
+ perr = platform_driver_register(&mac_sonic_platform_driver);
+ nerr = nubus_driver_register(&mac_sonic_nubus_driver);
+ return 0;
+}
+module_init(mac_sonic_init);
+
+static void __exit mac_sonic_exit(void)
+{
+ if (!perr)
+ platform_driver_unregister(&mac_sonic_platform_driver);
+ if (!nerr)
+ nubus_driver_unregister(&mac_sonic_nubus_driver);
+}
+module_exit(mac_sonic_exit);