diff options
Diffstat (limited to 'drivers/net/ethernet/sfc/siena/vfdi.h')
| -rw-r--r-- | drivers/net/ethernet/sfc/siena/vfdi.h | 252 |
1 files changed, 252 insertions, 0 deletions
diff --git a/drivers/net/ethernet/sfc/siena/vfdi.h b/drivers/net/ethernet/sfc/siena/vfdi.h new file mode 100644 index 000000000..480b872eb --- /dev/null +++ b/drivers/net/ethernet/sfc/siena/vfdi.h @@ -0,0 +1,252 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/**************************************************************************** + * Driver for Solarflare network controllers and boards + * Copyright 2010-2012 Solarflare Communications Inc. + */ +#ifndef _VFDI_H +#define _VFDI_H + +/** + * DOC: Virtual Function Driver Interface + * + * This file contains software structures used to form a two way + * communication channel between the VF driver and the PF driver, + * named Virtual Function Driver Interface (VFDI). + * + * For the purposes of VFDI, a page is a memory region with size and + * alignment of 4K. All addresses are DMA addresses to be used within + * the domain of the relevant VF. + * + * The only hardware-defined channels for a VF driver to communicate + * with the PF driver are the event mailboxes (%FR_CZ_USR_EV + * registers). Writing to these registers generates an event with + * EV_CODE = EV_CODE_USR_EV, USER_QID set to the index of the mailbox + * and USER_EV_REG_VALUE set to the value written. The PF driver may + * direct or disable delivery of these events by setting + * %FR_CZ_USR_EV_CFG. + * + * The PF driver can send arbitrary events to arbitrary event queues. + * However, for consistency, VFDI events from the PF are defined to + * follow the same form and be sent to the first event queue assigned + * to the VF while that queue is enabled by the VF driver. + * + * The general form of the variable bits of VFDI events is: + * + * 0 16 24 31 + * | DATA | TYPE | SEQ | + * + * SEQ is a sequence number which should be incremented by 1 (modulo + * 256) for each event. The sequence numbers used in each direction + * are independent. + * + * The VF submits requests of type &struct vfdi_req by sending the + * address of the request (ADDR) in a series of 4 events: + * + * 0 16 24 31 + * | ADDR[0:15] | VFDI_EV_TYPE_REQ_WORD0 | SEQ | + * | ADDR[16:31] | VFDI_EV_TYPE_REQ_WORD1 | SEQ+1 | + * | ADDR[32:47] | VFDI_EV_TYPE_REQ_WORD2 | SEQ+2 | + * | ADDR[48:63] | VFDI_EV_TYPE_REQ_WORD3 | SEQ+3 | + * + * The address must be page-aligned. After receiving such a valid + * series of events, the PF driver will attempt to read the request + * and write a response to the same address. In case of an invalid + * sequence of events or a DMA error, there will be no response. + * + * The VF driver may request that the PF driver writes status + * information into its domain asynchronously. After writing the + * status, the PF driver will send an event of the form: + * + * 0 16 24 31 + * | reserved | VFDI_EV_TYPE_STATUS | SEQ | + * + * In case the VF must be reset for any reason, the PF driver will + * send an event of the form: + * + * 0 16 24 31 + * | reserved | VFDI_EV_TYPE_RESET | SEQ | + * + * It is then the responsibility of the VF driver to request + * reinitialisation of its queues. + */ +#define VFDI_EV_SEQ_LBN 24 +#define VFDI_EV_SEQ_WIDTH 8 +#define VFDI_EV_TYPE_LBN 16 +#define VFDI_EV_TYPE_WIDTH 8 +#define VFDI_EV_TYPE_REQ_WORD0 0 +#define VFDI_EV_TYPE_REQ_WORD1 1 +#define VFDI_EV_TYPE_REQ_WORD2 2 +#define VFDI_EV_TYPE_REQ_WORD3 3 +#define VFDI_EV_TYPE_STATUS 4 +#define VFDI_EV_TYPE_RESET 5 +#define VFDI_EV_DATA_LBN 0 +#define VFDI_EV_DATA_WIDTH 16 + +struct vfdi_endpoint { + u8 mac_addr[ETH_ALEN]; + __be16 tci; +}; + +/** + * enum vfdi_op - VFDI operation enumeration + * @VFDI_OP_RESPONSE: Indicates a response to the request. + * @VFDI_OP_INIT_EVQ: Initialize SRAM entries and initialize an EVQ. + * @VFDI_OP_INIT_RXQ: Initialize SRAM entries and initialize an RXQ. + * @VFDI_OP_INIT_TXQ: Initialize SRAM entries and initialize a TXQ. + * @VFDI_OP_FINI_ALL_QUEUES: Flush all queues, finalize all queues, then + * finalize the SRAM entries. + * @VFDI_OP_INSERT_FILTER: Insert a MAC filter targeting the given RXQ. + * @VFDI_OP_REMOVE_ALL_FILTERS: Remove all filters. + * @VFDI_OP_SET_STATUS_PAGE: Set the DMA page(s) used for status updates + * from PF and write the initial status. + * @VFDI_OP_CLEAR_STATUS_PAGE: Clear the DMA page(s) used for status + * updates from PF. + */ +enum vfdi_op { + VFDI_OP_RESPONSE = 0, + VFDI_OP_INIT_EVQ = 1, + VFDI_OP_INIT_RXQ = 2, + VFDI_OP_INIT_TXQ = 3, + VFDI_OP_FINI_ALL_QUEUES = 4, + VFDI_OP_INSERT_FILTER = 5, + VFDI_OP_REMOVE_ALL_FILTERS = 6, + VFDI_OP_SET_STATUS_PAGE = 7, + VFDI_OP_CLEAR_STATUS_PAGE = 8, + VFDI_OP_LIMIT, +}; + +/* Response codes for VFDI operations. Other values may be used in future. */ +#define VFDI_RC_SUCCESS 0 +#define VFDI_RC_ENOMEM (-12) +#define VFDI_RC_EINVAL (-22) +#define VFDI_RC_EOPNOTSUPP (-95) +#define VFDI_RC_ETIMEDOUT (-110) + +/** + * struct vfdi_req - Request from VF driver to PF driver + * @op: Operation code or response indicator, taken from &enum vfdi_op. + * @rc: Response code. Set to 0 on success or a negative error code on failure. + * @u.init_evq.index: Index of event queue to create. + * @u.init_evq.buf_count: Number of 4k buffers backing event queue. + * @u.init_evq.addr: Array of length %u.init_evq.buf_count containing DMA + * address of each page backing the event queue. + * @u.init_rxq.index: Index of receive queue to create. + * @u.init_rxq.buf_count: Number of 4k buffers backing receive queue. + * @u.init_rxq.evq: Instance of event queue to target receive events at. + * @u.init_rxq.label: Label used in receive events. + * @u.init_rxq.flags: Unused. + * @u.init_rxq.addr: Array of length %u.init_rxq.buf_count containing DMA + * address of each page backing the receive queue. + * @u.init_txq.index: Index of transmit queue to create. + * @u.init_txq.buf_count: Number of 4k buffers backing transmit queue. + * @u.init_txq.evq: Instance of event queue to target transmit completion + * events at. + * @u.init_txq.label: Label used in transmit completion events. + * @u.init_txq.flags: Checksum offload flags. + * @u.init_txq.addr: Array of length %u.init_txq.buf_count containing DMA + * address of each page backing the transmit queue. + * @u.mac_filter.rxq: Insert MAC filter at VF local address/VLAN targeting + * all traffic at this receive queue. + * @u.mac_filter.flags: MAC filter flags. + * @u.set_status_page.dma_addr: Base address for the &struct vfdi_status. + * This address must be page-aligned and the PF may write up to a + * whole page (allowing for extension of the structure). + * @u.set_status_page.peer_page_count: Number of additional pages the VF + * has provided into which peer addresses may be DMAd. + * @u.set_status_page.peer_page_addr: Array of DMA addresses of pages. + * If the number of peers exceeds 256, then the VF must provide + * additional pages in this array. The PF will then DMA up to + * 512 vfdi_endpoint structures into each page. These addresses + * must be page-aligned. + */ +struct vfdi_req { + u32 op; + u32 reserved1; + s32 rc; + u32 reserved2; + union { + struct { + u32 index; + u32 buf_count; + u64 addr[]; + } init_evq; + struct { + u32 index; + u32 buf_count; + u32 evq; + u32 label; + u32 flags; +#define VFDI_RXQ_FLAG_SCATTER_EN 1 + u32 reserved; + u64 addr[]; + } init_rxq; + struct { + u32 index; + u32 buf_count; + u32 evq; + u32 label; + u32 flags; +#define VFDI_TXQ_FLAG_IP_CSUM_DIS 1 +#define VFDI_TXQ_FLAG_TCPUDP_CSUM_DIS 2 + u32 reserved; + u64 addr[]; + } init_txq; + struct { + u32 rxq; + u32 flags; +#define VFDI_MAC_FILTER_FLAG_RSS 1 +#define VFDI_MAC_FILTER_FLAG_SCATTER 2 + } mac_filter; + struct { + u64 dma_addr; + u64 peer_page_count; + u64 peer_page_addr[]; + } set_status_page; + } u; +}; + +/** + * struct vfdi_status - Status provided by PF driver to VF driver + * @generation_start: A generation count DMA'd to VF *before* the + * rest of the structure. + * @generation_end: A generation count DMA'd to VF *after* the + * rest of the structure. + * @version: Version of this structure; currently set to 1. Later + * versions must either be layout-compatible or only be sent to VFs + * that specifically request them. + * @length: Total length of this structure including embedded tables + * @vi_scale: log2 the number of VIs available on this VF. This quantity + * is used by the hardware for register decoding. + * @max_tx_channels: The maximum number of transmit queues the VF can use. + * @rss_rxq_count: The number of receive queues present in the shared RSS + * indirection table. + * @peer_count: Total number of peers in the complete peer list. If larger + * than ARRAY_SIZE(%peers), then the VF must provide sufficient + * additional pages each of which is filled with vfdi_endpoint structures. + * @local: The MAC address and outer VLAN tag of *this* VF + * @peers: Table of peer addresses. The @tci fields in these structures + * are currently unused and must be ignored. Additional peers are + * written into any additional pages provided by the VF. + * @timer_quantum_ns: Timer quantum (nominal period between timer ticks) + * for interrupt moderation timers, in nanoseconds. This member is only + * present if @length is sufficiently large. + */ +struct vfdi_status { + u32 generation_start; + u32 generation_end; + u32 version; + u32 length; + u8 vi_scale; + u8 max_tx_channels; + u8 rss_rxq_count; + u8 reserved1; + u16 peer_count; + u16 reserved2; + struct vfdi_endpoint local; + struct vfdi_endpoint peers[256]; + + /* Members below here extend version 1 of this structure */ + u32 timer_quantum_ns; +}; + +#endif |