summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c')
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c1241
1 files changed, 1241 insertions, 0 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
new file mode 100644
index 000000000..ab9f876b6
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -0,0 +1,1241 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2020, Intel Corporation
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/pci.h>
+#include <linux/dmi.h>
+#include "dwmac-intel.h"
+#include "dwmac4.h"
+#include "stmmac.h"
+#include "stmmac_ptp.h"
+
+struct intel_priv_data {
+ int mdio_adhoc_addr; /* mdio address for serdes & etc */
+ unsigned long crossts_adj;
+ bool is_pse;
+};
+
+/* This struct is used to associate PCI Function of MAC controller on a board,
+ * discovered via DMI, with the address of PHY connected to the MAC. The
+ * negative value of the address means that MAC controller is not connected
+ * with PHY.
+ */
+struct stmmac_pci_func_data {
+ unsigned int func;
+ int phy_addr;
+};
+
+struct stmmac_pci_dmi_data {
+ const struct stmmac_pci_func_data *func;
+ size_t nfuncs;
+};
+
+struct stmmac_pci_info {
+ int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat);
+};
+
+static int stmmac_pci_find_phy_addr(struct pci_dev *pdev,
+ const struct dmi_system_id *dmi_list)
+{
+ const struct stmmac_pci_func_data *func_data;
+ const struct stmmac_pci_dmi_data *dmi_data;
+ const struct dmi_system_id *dmi_id;
+ int func = PCI_FUNC(pdev->devfn);
+ size_t n;
+
+ dmi_id = dmi_first_match(dmi_list);
+ if (!dmi_id)
+ return -ENODEV;
+
+ dmi_data = dmi_id->driver_data;
+ func_data = dmi_data->func;
+
+ for (n = 0; n < dmi_data->nfuncs; n++, func_data++)
+ if (func_data->func == func)
+ return func_data->phy_addr;
+
+ return -ENODEV;
+}
+
+static int serdes_status_poll(struct stmmac_priv *priv, int phyaddr,
+ int phyreg, u32 mask, u32 val)
+{
+ unsigned int retries = 10;
+ int val_rd;
+
+ do {
+ val_rd = mdiobus_read(priv->mii, phyaddr, phyreg);
+ if ((val_rd & mask) == (val & mask))
+ return 0;
+ udelay(POLL_DELAY_US);
+ } while (--retries);
+
+ return -ETIMEDOUT;
+}
+
+static int intel_serdes_powerup(struct net_device *ndev, void *priv_data)
+{
+ struct intel_priv_data *intel_priv = priv_data;
+ struct stmmac_priv *priv = netdev_priv(ndev);
+ int serdes_phy_addr = 0;
+ u32 data = 0;
+
+ if (!intel_priv->mdio_adhoc_addr)
+ return 0;
+
+ serdes_phy_addr = intel_priv->mdio_adhoc_addr;
+
+ /* Set the serdes rate and the PCLK rate */
+ data = mdiobus_read(priv->mii, serdes_phy_addr,
+ SERDES_GCR0);
+
+ data &= ~SERDES_RATE_MASK;
+ data &= ~SERDES_PCLK_MASK;
+
+ if (priv->plat->max_speed == 2500)
+ data |= SERDES_RATE_PCIE_GEN2 << SERDES_RATE_PCIE_SHIFT |
+ SERDES_PCLK_37p5MHZ << SERDES_PCLK_SHIFT;
+ else
+ data |= SERDES_RATE_PCIE_GEN1 << SERDES_RATE_PCIE_SHIFT |
+ SERDES_PCLK_70MHZ << SERDES_PCLK_SHIFT;
+
+ mdiobus_write(priv->mii, serdes_phy_addr, SERDES_GCR0, data);
+
+ /* assert clk_req */
+ data = mdiobus_read(priv->mii, serdes_phy_addr, SERDES_GCR0);
+ data |= SERDES_PLL_CLK;
+ mdiobus_write(priv->mii, serdes_phy_addr, SERDES_GCR0, data);
+
+ /* check for clk_ack assertion */
+ data = serdes_status_poll(priv, serdes_phy_addr,
+ SERDES_GSR0,
+ SERDES_PLL_CLK,
+ SERDES_PLL_CLK);
+
+ if (data) {
+ dev_err(priv->device, "Serdes PLL clk request timeout\n");
+ return data;
+ }
+
+ /* assert lane reset */
+ data = mdiobus_read(priv->mii, serdes_phy_addr, SERDES_GCR0);
+ data |= SERDES_RST;
+ mdiobus_write(priv->mii, serdes_phy_addr, SERDES_GCR0, data);
+
+ /* check for assert lane reset reflection */
+ data = serdes_status_poll(priv, serdes_phy_addr,
+ SERDES_GSR0,
+ SERDES_RST,
+ SERDES_RST);
+
+ if (data) {
+ dev_err(priv->device, "Serdes assert lane reset timeout\n");
+ return data;
+ }
+
+ /* move power state to P0 */
+ data = mdiobus_read(priv->mii, serdes_phy_addr, SERDES_GCR0);
+
+ data &= ~SERDES_PWR_ST_MASK;
+ data |= SERDES_PWR_ST_P0 << SERDES_PWR_ST_SHIFT;
+
+ mdiobus_write(priv->mii, serdes_phy_addr, SERDES_GCR0, data);
+
+ /* Check for P0 state */
+ data = serdes_status_poll(priv, serdes_phy_addr,
+ SERDES_GSR0,
+ SERDES_PWR_ST_MASK,
+ SERDES_PWR_ST_P0 << SERDES_PWR_ST_SHIFT);
+
+ if (data) {
+ dev_err(priv->device, "Serdes power state P0 timeout.\n");
+ return data;
+ }
+
+ /* PSE only - ungate SGMII PHY Rx Clock */
+ if (intel_priv->is_pse)
+ mdiobus_modify(priv->mii, serdes_phy_addr, SERDES_GCR0,
+ 0, SERDES_PHY_RX_CLK);
+
+ return 0;
+}
+
+static void intel_serdes_powerdown(struct net_device *ndev, void *intel_data)
+{
+ struct intel_priv_data *intel_priv = intel_data;
+ struct stmmac_priv *priv = netdev_priv(ndev);
+ int serdes_phy_addr = 0;
+ u32 data = 0;
+
+ if (!intel_priv->mdio_adhoc_addr)
+ return;
+
+ serdes_phy_addr = intel_priv->mdio_adhoc_addr;
+
+ /* PSE only - gate SGMII PHY Rx Clock */
+ if (intel_priv->is_pse)
+ mdiobus_modify(priv->mii, serdes_phy_addr, SERDES_GCR0,
+ SERDES_PHY_RX_CLK, 0);
+
+ /* move power state to P3 */
+ data = mdiobus_read(priv->mii, serdes_phy_addr, SERDES_GCR0);
+
+ data &= ~SERDES_PWR_ST_MASK;
+ data |= SERDES_PWR_ST_P3 << SERDES_PWR_ST_SHIFT;
+
+ mdiobus_write(priv->mii, serdes_phy_addr, SERDES_GCR0, data);
+
+ /* Check for P3 state */
+ data = serdes_status_poll(priv, serdes_phy_addr,
+ SERDES_GSR0,
+ SERDES_PWR_ST_MASK,
+ SERDES_PWR_ST_P3 << SERDES_PWR_ST_SHIFT);
+
+ if (data) {
+ dev_err(priv->device, "Serdes power state P3 timeout\n");
+ return;
+ }
+
+ /* de-assert clk_req */
+ data = mdiobus_read(priv->mii, serdes_phy_addr, SERDES_GCR0);
+ data &= ~SERDES_PLL_CLK;
+ mdiobus_write(priv->mii, serdes_phy_addr, SERDES_GCR0, data);
+
+ /* check for clk_ack de-assert */
+ data = serdes_status_poll(priv, serdes_phy_addr,
+ SERDES_GSR0,
+ SERDES_PLL_CLK,
+ (u32)~SERDES_PLL_CLK);
+
+ if (data) {
+ dev_err(priv->device, "Serdes PLL clk de-assert timeout\n");
+ return;
+ }
+
+ /* de-assert lane reset */
+ data = mdiobus_read(priv->mii, serdes_phy_addr, SERDES_GCR0);
+ data &= ~SERDES_RST;
+ mdiobus_write(priv->mii, serdes_phy_addr, SERDES_GCR0, data);
+
+ /* check for de-assert lane reset reflection */
+ data = serdes_status_poll(priv, serdes_phy_addr,
+ SERDES_GSR0,
+ SERDES_RST,
+ (u32)~SERDES_RST);
+
+ if (data) {
+ dev_err(priv->device, "Serdes de-assert lane reset timeout\n");
+ return;
+ }
+}
+
+static void intel_speed_mode_2500(struct net_device *ndev, void *intel_data)
+{
+ struct intel_priv_data *intel_priv = intel_data;
+ struct stmmac_priv *priv = netdev_priv(ndev);
+ int serdes_phy_addr = 0;
+ u32 data = 0;
+
+ serdes_phy_addr = intel_priv->mdio_adhoc_addr;
+
+ /* Determine the link speed mode: 2.5Gbps/1Gbps */
+ data = mdiobus_read(priv->mii, serdes_phy_addr,
+ SERDES_GCR);
+
+ if (((data & SERDES_LINK_MODE_MASK) >> SERDES_LINK_MODE_SHIFT) ==
+ SERDES_LINK_MODE_2G5) {
+ dev_info(priv->device, "Link Speed Mode: 2.5Gbps\n");
+ priv->plat->max_speed = 2500;
+ priv->plat->phy_interface = PHY_INTERFACE_MODE_2500BASEX;
+ priv->plat->mdio_bus_data->xpcs_an_inband = false;
+ } else {
+ priv->plat->max_speed = 1000;
+ }
+}
+
+/* Program PTP Clock Frequency for different variant of
+ * Intel mGBE that has slightly different GPO mapping
+ */
+static void intel_mgbe_ptp_clk_freq_config(void *npriv)
+{
+ struct stmmac_priv *priv = (struct stmmac_priv *)npriv;
+ struct intel_priv_data *intel_priv;
+ u32 gpio_value;
+
+ intel_priv = (struct intel_priv_data *)priv->plat->bsp_priv;
+
+ gpio_value = readl(priv->ioaddr + GMAC_GPIO_STATUS);
+
+ if (intel_priv->is_pse) {
+ /* For PSE GbE, use 200MHz */
+ gpio_value &= ~PSE_PTP_CLK_FREQ_MASK;
+ gpio_value |= PSE_PTP_CLK_FREQ_200MHZ;
+ } else {
+ /* For PCH GbE, use 200MHz */
+ gpio_value &= ~PCH_PTP_CLK_FREQ_MASK;
+ gpio_value |= PCH_PTP_CLK_FREQ_200MHZ;
+ }
+
+ writel(gpio_value, priv->ioaddr + GMAC_GPIO_STATUS);
+}
+
+static void get_arttime(struct mii_bus *mii, int intel_adhoc_addr,
+ u64 *art_time)
+{
+ u64 ns;
+
+ ns = mdiobus_read(mii, intel_adhoc_addr, PMC_ART_VALUE3);
+ ns <<= GMAC4_ART_TIME_SHIFT;
+ ns |= mdiobus_read(mii, intel_adhoc_addr, PMC_ART_VALUE2);
+ ns <<= GMAC4_ART_TIME_SHIFT;
+ ns |= mdiobus_read(mii, intel_adhoc_addr, PMC_ART_VALUE1);
+ ns <<= GMAC4_ART_TIME_SHIFT;
+ ns |= mdiobus_read(mii, intel_adhoc_addr, PMC_ART_VALUE0);
+
+ *art_time = ns;
+}
+
+static int stmmac_cross_ts_isr(struct stmmac_priv *priv)
+{
+ return (readl(priv->ioaddr + GMAC_INT_STATUS) & GMAC_INT_TSIE);
+}
+
+static int intel_crosststamp(ktime_t *device,
+ struct system_counterval_t *system,
+ void *ctx)
+{
+ struct intel_priv_data *intel_priv;
+
+ struct stmmac_priv *priv = (struct stmmac_priv *)ctx;
+ void __iomem *ptpaddr = priv->ptpaddr;
+ void __iomem *ioaddr = priv->hw->pcsr;
+ unsigned long flags;
+ u64 art_time = 0;
+ u64 ptp_time = 0;
+ u32 num_snapshot;
+ u32 gpio_value;
+ u32 acr_value;
+ int i;
+
+ if (!boot_cpu_has(X86_FEATURE_ART))
+ return -EOPNOTSUPP;
+
+ intel_priv = priv->plat->bsp_priv;
+
+ /* Both internal crosstimestamping and external triggered event
+ * timestamping cannot be run concurrently.
+ */
+ if (priv->plat->ext_snapshot_en)
+ return -EBUSY;
+
+ priv->plat->int_snapshot_en = 1;
+
+ mutex_lock(&priv->aux_ts_lock);
+ /* Enable Internal snapshot trigger */
+ acr_value = readl(ptpaddr + PTP_ACR);
+ acr_value &= ~PTP_ACR_MASK;
+ switch (priv->plat->int_snapshot_num) {
+ case AUX_SNAPSHOT0:
+ acr_value |= PTP_ACR_ATSEN0;
+ break;
+ case AUX_SNAPSHOT1:
+ acr_value |= PTP_ACR_ATSEN1;
+ break;
+ case AUX_SNAPSHOT2:
+ acr_value |= PTP_ACR_ATSEN2;
+ break;
+ case AUX_SNAPSHOT3:
+ acr_value |= PTP_ACR_ATSEN3;
+ break;
+ default:
+ mutex_unlock(&priv->aux_ts_lock);
+ priv->plat->int_snapshot_en = 0;
+ return -EINVAL;
+ }
+ writel(acr_value, ptpaddr + PTP_ACR);
+
+ /* Clear FIFO */
+ acr_value = readl(ptpaddr + PTP_ACR);
+ acr_value |= PTP_ACR_ATSFC;
+ writel(acr_value, ptpaddr + PTP_ACR);
+ /* Release the mutex */
+ mutex_unlock(&priv->aux_ts_lock);
+
+ /* Trigger Internal snapshot signal
+ * Create a rising edge by just toggle the GPO1 to low
+ * and back to high.
+ */
+ gpio_value = readl(ioaddr + GMAC_GPIO_STATUS);
+ gpio_value &= ~GMAC_GPO1;
+ writel(gpio_value, ioaddr + GMAC_GPIO_STATUS);
+ gpio_value |= GMAC_GPO1;
+ writel(gpio_value, ioaddr + GMAC_GPIO_STATUS);
+
+ /* Time sync done Indication - Interrupt method */
+ if (!wait_event_interruptible_timeout(priv->tstamp_busy_wait,
+ stmmac_cross_ts_isr(priv),
+ HZ / 100)) {
+ priv->plat->int_snapshot_en = 0;
+ return -ETIMEDOUT;
+ }
+
+ num_snapshot = (readl(ioaddr + GMAC_TIMESTAMP_STATUS) &
+ GMAC_TIMESTAMP_ATSNS_MASK) >>
+ GMAC_TIMESTAMP_ATSNS_SHIFT;
+
+ /* Repeat until the timestamps are from the FIFO last segment */
+ for (i = 0; i < num_snapshot; i++) {
+ read_lock_irqsave(&priv->ptp_lock, flags);
+ stmmac_get_ptptime(priv, ptpaddr, &ptp_time);
+ *device = ns_to_ktime(ptp_time);
+ read_unlock_irqrestore(&priv->ptp_lock, flags);
+ get_arttime(priv->mii, intel_priv->mdio_adhoc_addr, &art_time);
+ *system = convert_art_to_tsc(art_time);
+ }
+
+ system->cycles *= intel_priv->crossts_adj;
+ priv->plat->int_snapshot_en = 0;
+
+ return 0;
+}
+
+static void intel_mgbe_pse_crossts_adj(struct intel_priv_data *intel_priv,
+ int base)
+{
+ if (boot_cpu_has(X86_FEATURE_ART)) {
+ unsigned int art_freq;
+
+ /* On systems that support ART, ART frequency can be obtained
+ * from ECX register of CPUID leaf (0x15).
+ */
+ art_freq = cpuid_ecx(ART_CPUID_LEAF);
+ do_div(art_freq, base);
+ intel_priv->crossts_adj = art_freq;
+ }
+}
+
+static void common_default_data(struct plat_stmmacenet_data *plat)
+{
+ plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
+ plat->has_gmac = 1;
+ plat->force_sf_dma_mode = 1;
+
+ plat->mdio_bus_data->needs_reset = true;
+
+ /* Set default value for multicast hash bins */
+ plat->multicast_filter_bins = HASH_TABLE_SIZE;
+
+ /* Set default value for unicast filter entries */
+ plat->unicast_filter_entries = 1;
+
+ /* Set the maxmtu to a default of JUMBO_LEN */
+ plat->maxmtu = JUMBO_LEN;
+
+ /* Set default number of RX and TX queues to use */
+ plat->tx_queues_to_use = 1;
+ plat->rx_queues_to_use = 1;
+
+ /* Disable Priority config by default */
+ plat->tx_queues_cfg[0].use_prio = false;
+ plat->rx_queues_cfg[0].use_prio = false;
+
+ /* Disable RX queues routing by default */
+ plat->rx_queues_cfg[0].pkt_route = 0x0;
+}
+
+static int intel_mgbe_common_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ struct fwnode_handle *fwnode;
+ char clk_name[20];
+ int ret;
+ int i;
+
+ plat->pdev = pdev;
+ plat->phy_addr = -1;
+ plat->clk_csr = 5;
+ plat->has_gmac = 0;
+ plat->has_gmac4 = 1;
+ plat->force_sf_dma_mode = 0;
+ plat->tso_en = 1;
+ plat->sph_disable = 1;
+
+ /* Multiplying factor to the clk_eee_i clock time
+ * period to make it closer to 100 ns. This value
+ * should be programmed such that the clk_eee_time_period *
+ * (MULT_FACT_100NS + 1) should be within 80 ns to 120 ns
+ * clk_eee frequency is 19.2Mhz
+ * clk_eee_time_period is 52ns
+ * 52ns * (1 + 1) = 104ns
+ * MULT_FACT_100NS = 1
+ */
+ plat->mult_fact_100ns = 1;
+
+ plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP;
+
+ for (i = 0; i < plat->rx_queues_to_use; i++) {
+ plat->rx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB;
+ plat->rx_queues_cfg[i].chan = i;
+
+ /* Disable Priority config by default */
+ plat->rx_queues_cfg[i].use_prio = false;
+
+ /* Disable RX queues routing by default */
+ plat->rx_queues_cfg[i].pkt_route = 0x0;
+ }
+
+ for (i = 0; i < plat->tx_queues_to_use; i++) {
+ plat->tx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB;
+
+ /* Disable Priority config by default */
+ plat->tx_queues_cfg[i].use_prio = false;
+ /* Default TX Q0 to use TSO and rest TXQ for TBS */
+ if (i > 0)
+ plat->tx_queues_cfg[i].tbs_en = 1;
+ }
+
+ /* FIFO size is 4096 bytes for 1 tx/rx queue */
+ plat->tx_fifo_size = plat->tx_queues_to_use * 4096;
+ plat->rx_fifo_size = plat->rx_queues_to_use * 4096;
+
+ plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR;
+ plat->tx_queues_cfg[0].weight = 0x09;
+ plat->tx_queues_cfg[1].weight = 0x0A;
+ plat->tx_queues_cfg[2].weight = 0x0B;
+ plat->tx_queues_cfg[3].weight = 0x0C;
+ plat->tx_queues_cfg[4].weight = 0x0D;
+ plat->tx_queues_cfg[5].weight = 0x0E;
+ plat->tx_queues_cfg[6].weight = 0x0F;
+ plat->tx_queues_cfg[7].weight = 0x10;
+
+ plat->dma_cfg->pbl = 32;
+ plat->dma_cfg->pblx8 = true;
+ plat->dma_cfg->fixed_burst = 0;
+ plat->dma_cfg->mixed_burst = 0;
+ plat->dma_cfg->aal = 0;
+ plat->dma_cfg->dche = true;
+
+ plat->axi = devm_kzalloc(&pdev->dev, sizeof(*plat->axi),
+ GFP_KERNEL);
+ if (!plat->axi)
+ return -ENOMEM;
+
+ plat->axi->axi_lpi_en = 0;
+ plat->axi->axi_xit_frm = 0;
+ plat->axi->axi_wr_osr_lmt = 1;
+ plat->axi->axi_rd_osr_lmt = 1;
+ plat->axi->axi_blen[0] = 4;
+ plat->axi->axi_blen[1] = 8;
+ plat->axi->axi_blen[2] = 16;
+
+ plat->ptp_max_adj = plat->clk_ptp_rate;
+ plat->eee_usecs_rate = plat->clk_ptp_rate;
+
+ /* Set system clock */
+ sprintf(clk_name, "%s-%s", "stmmac", pci_name(pdev));
+
+ plat->stmmac_clk = clk_register_fixed_rate(&pdev->dev,
+ clk_name, NULL, 0,
+ plat->clk_ptp_rate);
+
+ if (IS_ERR(plat->stmmac_clk)) {
+ dev_warn(&pdev->dev, "Fail to register stmmac-clk\n");
+ plat->stmmac_clk = NULL;
+ }
+
+ ret = clk_prepare_enable(plat->stmmac_clk);
+ if (ret) {
+ clk_unregister_fixed_rate(plat->stmmac_clk);
+ return ret;
+ }
+
+ plat->ptp_clk_freq_config = intel_mgbe_ptp_clk_freq_config;
+
+ /* Set default value for multicast hash bins */
+ plat->multicast_filter_bins = HASH_TABLE_SIZE;
+
+ /* Set default value for unicast filter entries */
+ plat->unicast_filter_entries = 1;
+
+ /* Set the maxmtu to a default of JUMBO_LEN */
+ plat->maxmtu = JUMBO_LEN;
+
+ plat->vlan_fail_q_en = true;
+
+ /* Use the last Rx queue */
+ plat->vlan_fail_q = plat->rx_queues_to_use - 1;
+
+ /* For fixed-link setup, we allow phy-mode setting */
+ fwnode = dev_fwnode(&pdev->dev);
+ if (fwnode) {
+ int phy_mode;
+
+ /* "phy-mode" setting is optional. If it is set,
+ * we allow either sgmii or 1000base-x for now.
+ */
+ phy_mode = fwnode_get_phy_mode(fwnode);
+ if (phy_mode >= 0) {
+ if (phy_mode == PHY_INTERFACE_MODE_SGMII ||
+ phy_mode == PHY_INTERFACE_MODE_1000BASEX)
+ plat->phy_interface = phy_mode;
+ else
+ dev_warn(&pdev->dev, "Invalid phy-mode\n");
+ }
+ }
+
+ /* Intel mgbe SGMII interface uses pcs-xcps */
+ if (plat->phy_interface == PHY_INTERFACE_MODE_SGMII ||
+ plat->phy_interface == PHY_INTERFACE_MODE_1000BASEX) {
+ plat->mdio_bus_data->has_xpcs = true;
+ plat->mdio_bus_data->xpcs_an_inband = true;
+ }
+
+ /* For fixed-link setup, we clear xpcs_an_inband */
+ if (fwnode) {
+ struct fwnode_handle *fixed_node;
+
+ fixed_node = fwnode_get_named_child_node(fwnode, "fixed-link");
+ if (fixed_node)
+ plat->mdio_bus_data->xpcs_an_inband = false;
+
+ fwnode_handle_put(fixed_node);
+ }
+
+ /* Ensure mdio bus scan skips intel serdes and pcs-xpcs */
+ plat->mdio_bus_data->phy_mask = 1 << INTEL_MGBE_ADHOC_ADDR;
+ plat->mdio_bus_data->phy_mask |= 1 << INTEL_MGBE_XPCS_ADDR;
+
+ plat->int_snapshot_num = AUX_SNAPSHOT1;
+ plat->ext_snapshot_num = AUX_SNAPSHOT0;
+
+ plat->crosststamp = intel_crosststamp;
+ plat->int_snapshot_en = 0;
+
+ /* Setup MSI vector offset specific to Intel mGbE controller */
+ plat->msi_mac_vec = 29;
+ plat->msi_lpi_vec = 28;
+ plat->msi_sfty_ce_vec = 27;
+ plat->msi_sfty_ue_vec = 26;
+ plat->msi_rx_base_vec = 0;
+ plat->msi_tx_base_vec = 1;
+
+ return 0;
+}
+
+static int ehl_common_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ plat->rx_queues_to_use = 8;
+ plat->tx_queues_to_use = 8;
+ plat->use_phy_wol = 1;
+
+ plat->safety_feat_cfg->tsoee = 1;
+ plat->safety_feat_cfg->mrxpee = 1;
+ plat->safety_feat_cfg->mestee = 1;
+ plat->safety_feat_cfg->mrxee = 1;
+ plat->safety_feat_cfg->mtxee = 1;
+ plat->safety_feat_cfg->epsi = 0;
+ plat->safety_feat_cfg->edpp = 0;
+ plat->safety_feat_cfg->prtyen = 0;
+ plat->safety_feat_cfg->tmouten = 0;
+
+ return intel_mgbe_common_data(pdev, plat);
+}
+
+static int ehl_sgmii_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ plat->bus_id = 1;
+ plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
+ plat->speed_mode_2500 = intel_speed_mode_2500;
+ plat->serdes_powerup = intel_serdes_powerup;
+ plat->serdes_powerdown = intel_serdes_powerdown;
+
+ plat->clk_ptp_rate = 204800000;
+
+ return ehl_common_data(pdev, plat);
+}
+
+static struct stmmac_pci_info ehl_sgmii1g_info = {
+ .setup = ehl_sgmii_data,
+};
+
+static int ehl_rgmii_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ plat->bus_id = 1;
+ plat->phy_interface = PHY_INTERFACE_MODE_RGMII;
+
+ plat->clk_ptp_rate = 204800000;
+
+ return ehl_common_data(pdev, plat);
+}
+
+static struct stmmac_pci_info ehl_rgmii1g_info = {
+ .setup = ehl_rgmii_data,
+};
+
+static int ehl_pse0_common_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ struct intel_priv_data *intel_priv = plat->bsp_priv;
+
+ intel_priv->is_pse = true;
+ plat->bus_id = 2;
+ plat->host_dma_width = 32;
+
+ plat->clk_ptp_rate = 200000000;
+
+ intel_mgbe_pse_crossts_adj(intel_priv, EHL_PSE_ART_MHZ);
+
+ return ehl_common_data(pdev, plat);
+}
+
+static int ehl_pse0_rgmii1g_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ plat->phy_interface = PHY_INTERFACE_MODE_RGMII_ID;
+ return ehl_pse0_common_data(pdev, plat);
+}
+
+static struct stmmac_pci_info ehl_pse0_rgmii1g_info = {
+ .setup = ehl_pse0_rgmii1g_data,
+};
+
+static int ehl_pse0_sgmii1g_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
+ plat->speed_mode_2500 = intel_speed_mode_2500;
+ plat->serdes_powerup = intel_serdes_powerup;
+ plat->serdes_powerdown = intel_serdes_powerdown;
+ return ehl_pse0_common_data(pdev, plat);
+}
+
+static struct stmmac_pci_info ehl_pse0_sgmii1g_info = {
+ .setup = ehl_pse0_sgmii1g_data,
+};
+
+static int ehl_pse1_common_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ struct intel_priv_data *intel_priv = plat->bsp_priv;
+
+ intel_priv->is_pse = true;
+ plat->bus_id = 3;
+ plat->host_dma_width = 32;
+
+ plat->clk_ptp_rate = 200000000;
+
+ intel_mgbe_pse_crossts_adj(intel_priv, EHL_PSE_ART_MHZ);
+
+ return ehl_common_data(pdev, plat);
+}
+
+static int ehl_pse1_rgmii1g_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ plat->phy_interface = PHY_INTERFACE_MODE_RGMII_ID;
+ return ehl_pse1_common_data(pdev, plat);
+}
+
+static struct stmmac_pci_info ehl_pse1_rgmii1g_info = {
+ .setup = ehl_pse1_rgmii1g_data,
+};
+
+static int ehl_pse1_sgmii1g_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
+ plat->speed_mode_2500 = intel_speed_mode_2500;
+ plat->serdes_powerup = intel_serdes_powerup;
+ plat->serdes_powerdown = intel_serdes_powerdown;
+ return ehl_pse1_common_data(pdev, plat);
+}
+
+static struct stmmac_pci_info ehl_pse1_sgmii1g_info = {
+ .setup = ehl_pse1_sgmii1g_data,
+};
+
+static int tgl_common_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ plat->rx_queues_to_use = 6;
+ plat->tx_queues_to_use = 4;
+ plat->clk_ptp_rate = 204800000;
+ plat->speed_mode_2500 = intel_speed_mode_2500;
+
+ plat->safety_feat_cfg->tsoee = 1;
+ plat->safety_feat_cfg->mrxpee = 0;
+ plat->safety_feat_cfg->mestee = 1;
+ plat->safety_feat_cfg->mrxee = 1;
+ plat->safety_feat_cfg->mtxee = 1;
+ plat->safety_feat_cfg->epsi = 0;
+ plat->safety_feat_cfg->edpp = 0;
+ plat->safety_feat_cfg->prtyen = 0;
+ plat->safety_feat_cfg->tmouten = 0;
+
+ return intel_mgbe_common_data(pdev, plat);
+}
+
+static int tgl_sgmii_phy0_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ plat->bus_id = 1;
+ plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
+ plat->serdes_powerup = intel_serdes_powerup;
+ plat->serdes_powerdown = intel_serdes_powerdown;
+ return tgl_common_data(pdev, plat);
+}
+
+static struct stmmac_pci_info tgl_sgmii1g_phy0_info = {
+ .setup = tgl_sgmii_phy0_data,
+};
+
+static int tgl_sgmii_phy1_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ plat->bus_id = 2;
+ plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
+ plat->serdes_powerup = intel_serdes_powerup;
+ plat->serdes_powerdown = intel_serdes_powerdown;
+ return tgl_common_data(pdev, plat);
+}
+
+static struct stmmac_pci_info tgl_sgmii1g_phy1_info = {
+ .setup = tgl_sgmii_phy1_data,
+};
+
+static int adls_sgmii_phy0_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ plat->bus_id = 1;
+ plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
+
+ /* SerDes power up and power down are done in BIOS for ADL */
+
+ return tgl_common_data(pdev, plat);
+}
+
+static struct stmmac_pci_info adls_sgmii1g_phy0_info = {
+ .setup = adls_sgmii_phy0_data,
+};
+
+static int adls_sgmii_phy1_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ plat->bus_id = 2;
+ plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
+
+ /* SerDes power up and power down are done in BIOS for ADL */
+
+ return tgl_common_data(pdev, plat);
+}
+
+static struct stmmac_pci_info adls_sgmii1g_phy1_info = {
+ .setup = adls_sgmii_phy1_data,
+};
+static const struct stmmac_pci_func_data galileo_stmmac_func_data[] = {
+ {
+ .func = 6,
+ .phy_addr = 1,
+ },
+};
+
+static const struct stmmac_pci_dmi_data galileo_stmmac_dmi_data = {
+ .func = galileo_stmmac_func_data,
+ .nfuncs = ARRAY_SIZE(galileo_stmmac_func_data),
+};
+
+static const struct stmmac_pci_func_data iot2040_stmmac_func_data[] = {
+ {
+ .func = 6,
+ .phy_addr = 1,
+ },
+ {
+ .func = 7,
+ .phy_addr = 1,
+ },
+};
+
+static const struct stmmac_pci_dmi_data iot2040_stmmac_dmi_data = {
+ .func = iot2040_stmmac_func_data,
+ .nfuncs = ARRAY_SIZE(iot2040_stmmac_func_data),
+};
+
+static const struct dmi_system_id quark_pci_dmi[] = {
+ {
+ .matches = {
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "Galileo"),
+ },
+ .driver_data = (void *)&galileo_stmmac_dmi_data,
+ },
+ {
+ .matches = {
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "GalileoGen2"),
+ },
+ .driver_data = (void *)&galileo_stmmac_dmi_data,
+ },
+ /* There are 2 types of SIMATIC IOT2000: IOT2020 and IOT2040.
+ * The asset tag "6ES7647-0AA00-0YA2" is only for IOT2020 which
+ * has only one pci network device while other asset tags are
+ * for IOT2040 which has two.
+ */
+ {
+ .matches = {
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"),
+ DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG,
+ "6ES7647-0AA00-0YA2"),
+ },
+ .driver_data = (void *)&galileo_stmmac_dmi_data,
+ },
+ {
+ .matches = {
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"),
+ },
+ .driver_data = (void *)&iot2040_stmmac_dmi_data,
+ },
+ {}
+};
+
+static int quark_default_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ int ret;
+
+ /* Set common default data first */
+ common_default_data(plat);
+
+ /* Refuse to load the driver and register net device if MAC controller
+ * does not connect to any PHY interface.
+ */
+ ret = stmmac_pci_find_phy_addr(pdev, quark_pci_dmi);
+ if (ret < 0) {
+ /* Return error to the caller on DMI enabled boards. */
+ if (dmi_get_system_info(DMI_BOARD_NAME))
+ return ret;
+
+ /* Galileo boards with old firmware don't support DMI. We always
+ * use 1 here as PHY address, so at least the first found MAC
+ * controller would be probed.
+ */
+ ret = 1;
+ }
+
+ plat->bus_id = pci_dev_id(pdev);
+ plat->phy_addr = ret;
+ plat->phy_interface = PHY_INTERFACE_MODE_RMII;
+
+ plat->dma_cfg->pbl = 16;
+ plat->dma_cfg->pblx8 = true;
+ plat->dma_cfg->fixed_burst = 1;
+ /* AXI (TODO) */
+
+ return 0;
+}
+
+static const struct stmmac_pci_info quark_info = {
+ .setup = quark_default_data,
+};
+
+static int stmmac_config_single_msi(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat,
+ struct stmmac_resources *res)
+{
+ int ret;
+
+ ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
+ if (ret < 0) {
+ dev_info(&pdev->dev, "%s: Single IRQ enablement failed\n",
+ __func__);
+ return ret;
+ }
+
+ res->irq = pci_irq_vector(pdev, 0);
+ res->wol_irq = res->irq;
+ plat->multi_msi_en = 0;
+ dev_info(&pdev->dev, "%s: Single IRQ enablement successful\n",
+ __func__);
+
+ return 0;
+}
+
+static int stmmac_config_multi_msi(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat,
+ struct stmmac_resources *res)
+{
+ int ret;
+ int i;
+
+ if (plat->msi_rx_base_vec >= STMMAC_MSI_VEC_MAX ||
+ plat->msi_tx_base_vec >= STMMAC_MSI_VEC_MAX) {
+ dev_info(&pdev->dev, "%s: Invalid RX & TX vector defined\n",
+ __func__);
+ return -1;
+ }
+
+ ret = pci_alloc_irq_vectors(pdev, 2, STMMAC_MSI_VEC_MAX,
+ PCI_IRQ_MSI | PCI_IRQ_MSIX);
+ if (ret < 0) {
+ dev_info(&pdev->dev, "%s: multi MSI enablement failed\n",
+ __func__);
+ return ret;
+ }
+
+ /* For RX MSI */
+ for (i = 0; i < plat->rx_queues_to_use; i++) {
+ res->rx_irq[i] = pci_irq_vector(pdev,
+ plat->msi_rx_base_vec + i * 2);
+ }
+
+ /* For TX MSI */
+ for (i = 0; i < plat->tx_queues_to_use; i++) {
+ res->tx_irq[i] = pci_irq_vector(pdev,
+ plat->msi_tx_base_vec + i * 2);
+ }
+
+ if (plat->msi_mac_vec < STMMAC_MSI_VEC_MAX)
+ res->irq = pci_irq_vector(pdev, plat->msi_mac_vec);
+ if (plat->msi_wol_vec < STMMAC_MSI_VEC_MAX)
+ res->wol_irq = pci_irq_vector(pdev, plat->msi_wol_vec);
+ if (plat->msi_lpi_vec < STMMAC_MSI_VEC_MAX)
+ res->lpi_irq = pci_irq_vector(pdev, plat->msi_lpi_vec);
+ if (plat->msi_sfty_ce_vec < STMMAC_MSI_VEC_MAX)
+ res->sfty_ce_irq = pci_irq_vector(pdev, plat->msi_sfty_ce_vec);
+ if (plat->msi_sfty_ue_vec < STMMAC_MSI_VEC_MAX)
+ res->sfty_ue_irq = pci_irq_vector(pdev, plat->msi_sfty_ue_vec);
+
+ plat->multi_msi_en = 1;
+ dev_info(&pdev->dev, "%s: multi MSI enablement successful\n", __func__);
+
+ return 0;
+}
+
+/**
+ * intel_eth_pci_probe
+ *
+ * @pdev: pci device pointer
+ * @id: pointer to table of device id/id's.
+ *
+ * Description: This probing function gets called for all PCI devices which
+ * match the ID table and are not "owned" by other driver yet. This function
+ * gets passed a "struct pci_dev *" for each device whose entry in the ID table
+ * matches the device. The probe functions returns zero when the driver choose
+ * to take "ownership" of the device or an error code(-ve no) otherwise.
+ */
+static int intel_eth_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct stmmac_pci_info *info = (struct stmmac_pci_info *)id->driver_data;
+ struct intel_priv_data *intel_priv;
+ struct plat_stmmacenet_data *plat;
+ struct stmmac_resources res;
+ int ret;
+
+ intel_priv = devm_kzalloc(&pdev->dev, sizeof(*intel_priv), GFP_KERNEL);
+ if (!intel_priv)
+ return -ENOMEM;
+
+ plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
+ if (!plat)
+ return -ENOMEM;
+
+ plat->mdio_bus_data = devm_kzalloc(&pdev->dev,
+ sizeof(*plat->mdio_bus_data),
+ GFP_KERNEL);
+ if (!plat->mdio_bus_data)
+ return -ENOMEM;
+
+ plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg),
+ GFP_KERNEL);
+ if (!plat->dma_cfg)
+ return -ENOMEM;
+
+ plat->safety_feat_cfg = devm_kzalloc(&pdev->dev,
+ sizeof(*plat->safety_feat_cfg),
+ GFP_KERNEL);
+ if (!plat->safety_feat_cfg)
+ return -ENOMEM;
+
+ /* Enable pci device */
+ ret = pcim_enable_device(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "%s: ERROR: failed to enable device\n",
+ __func__);
+ return ret;
+ }
+
+ ret = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev));
+ if (ret)
+ return ret;
+
+ pci_set_master(pdev);
+
+ plat->bsp_priv = intel_priv;
+ intel_priv->mdio_adhoc_addr = INTEL_MGBE_ADHOC_ADDR;
+ intel_priv->crossts_adj = 1;
+
+ /* Initialize all MSI vectors to invalid so that it can be set
+ * according to platform data settings below.
+ * Note: MSI vector takes value from 0 upto 31 (STMMAC_MSI_VEC_MAX)
+ */
+ plat->msi_mac_vec = STMMAC_MSI_VEC_MAX;
+ plat->msi_wol_vec = STMMAC_MSI_VEC_MAX;
+ plat->msi_lpi_vec = STMMAC_MSI_VEC_MAX;
+ plat->msi_sfty_ce_vec = STMMAC_MSI_VEC_MAX;
+ plat->msi_sfty_ue_vec = STMMAC_MSI_VEC_MAX;
+ plat->msi_rx_base_vec = STMMAC_MSI_VEC_MAX;
+ plat->msi_tx_base_vec = STMMAC_MSI_VEC_MAX;
+
+ ret = info->setup(pdev, plat);
+ if (ret)
+ return ret;
+
+ memset(&res, 0, sizeof(res));
+ res.addr = pcim_iomap_table(pdev)[0];
+
+ if (plat->eee_usecs_rate > 0) {
+ u32 tx_lpi_usec;
+
+ tx_lpi_usec = (plat->eee_usecs_rate / 1000000) - 1;
+ writel(tx_lpi_usec, res.addr + GMAC_1US_TIC_COUNTER);
+ }
+
+ ret = stmmac_config_multi_msi(pdev, plat, &res);
+ if (ret) {
+ ret = stmmac_config_single_msi(pdev, plat, &res);
+ if (ret) {
+ dev_err(&pdev->dev, "%s: ERROR: failed to enable IRQ\n",
+ __func__);
+ goto err_alloc_irq;
+ }
+ }
+
+ ret = stmmac_dvr_probe(&pdev->dev, plat, &res);
+ if (ret) {
+ goto err_alloc_irq;
+ }
+
+ return 0;
+
+err_alloc_irq:
+ clk_disable_unprepare(plat->stmmac_clk);
+ clk_unregister_fixed_rate(plat->stmmac_clk);
+ return ret;
+}
+
+/**
+ * intel_eth_pci_remove
+ *
+ * @pdev: pci device pointer
+ * Description: this function calls the main to free the net resources
+ * and releases the PCI resources.
+ */
+static void intel_eth_pci_remove(struct pci_dev *pdev)
+{
+ struct net_device *ndev = dev_get_drvdata(&pdev->dev);
+ struct stmmac_priv *priv = netdev_priv(ndev);
+
+ stmmac_dvr_remove(&pdev->dev);
+
+ clk_disable_unprepare(priv->plat->stmmac_clk);
+ clk_unregister_fixed_rate(priv->plat->stmmac_clk);
+}
+
+static int __maybe_unused intel_eth_pci_suspend(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ int ret;
+
+ ret = stmmac_suspend(dev);
+ if (ret)
+ return ret;
+
+ ret = pci_save_state(pdev);
+ if (ret)
+ return ret;
+
+ pci_wake_from_d3(pdev, true);
+ pci_set_power_state(pdev, PCI_D3hot);
+ return 0;
+}
+
+static int __maybe_unused intel_eth_pci_resume(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ int ret;
+
+ pci_restore_state(pdev);
+ pci_set_power_state(pdev, PCI_D0);
+
+ ret = pcim_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ pci_set_master(pdev);
+
+ return stmmac_resume(dev);
+}
+
+static SIMPLE_DEV_PM_OPS(intel_eth_pm_ops, intel_eth_pci_suspend,
+ intel_eth_pci_resume);
+
+#define PCI_DEVICE_ID_INTEL_QUARK 0x0937
+#define PCI_DEVICE_ID_INTEL_EHL_RGMII1G 0x4b30
+#define PCI_DEVICE_ID_INTEL_EHL_SGMII1G 0x4b31
+#define PCI_DEVICE_ID_INTEL_EHL_SGMII2G5 0x4b32
+/* Intel(R) Programmable Services Engine (Intel(R) PSE) consist of 2 MAC
+ * which are named PSE0 and PSE1
+ */
+#define PCI_DEVICE_ID_INTEL_EHL_PSE0_RGMII1G 0x4ba0
+#define PCI_DEVICE_ID_INTEL_EHL_PSE0_SGMII1G 0x4ba1
+#define PCI_DEVICE_ID_INTEL_EHL_PSE0_SGMII2G5 0x4ba2
+#define PCI_DEVICE_ID_INTEL_EHL_PSE1_RGMII1G 0x4bb0
+#define PCI_DEVICE_ID_INTEL_EHL_PSE1_SGMII1G 0x4bb1
+#define PCI_DEVICE_ID_INTEL_EHL_PSE1_SGMII2G5 0x4bb2
+#define PCI_DEVICE_ID_INTEL_TGLH_SGMII1G_0 0x43ac
+#define PCI_DEVICE_ID_INTEL_TGLH_SGMII1G_1 0x43a2
+#define PCI_DEVICE_ID_INTEL_TGL_SGMII1G 0xa0ac
+#define PCI_DEVICE_ID_INTEL_ADLS_SGMII1G_0 0x7aac
+#define PCI_DEVICE_ID_INTEL_ADLS_SGMII1G_1 0x7aad
+#define PCI_DEVICE_ID_INTEL_ADLN_SGMII1G 0x54ac
+#define PCI_DEVICE_ID_INTEL_RPLP_SGMII1G 0x51ac
+
+static const struct pci_device_id intel_eth_pci_id_table[] = {
+ { PCI_DEVICE_DATA(INTEL, QUARK, &quark_info) },
+ { PCI_DEVICE_DATA(INTEL, EHL_RGMII1G, &ehl_rgmii1g_info) },
+ { PCI_DEVICE_DATA(INTEL, EHL_SGMII1G, &ehl_sgmii1g_info) },
+ { PCI_DEVICE_DATA(INTEL, EHL_SGMII2G5, &ehl_sgmii1g_info) },
+ { PCI_DEVICE_DATA(INTEL, EHL_PSE0_RGMII1G, &ehl_pse0_rgmii1g_info) },
+ { PCI_DEVICE_DATA(INTEL, EHL_PSE0_SGMII1G, &ehl_pse0_sgmii1g_info) },
+ { PCI_DEVICE_DATA(INTEL, EHL_PSE0_SGMII2G5, &ehl_pse0_sgmii1g_info) },
+ { PCI_DEVICE_DATA(INTEL, EHL_PSE1_RGMII1G, &ehl_pse1_rgmii1g_info) },
+ { PCI_DEVICE_DATA(INTEL, EHL_PSE1_SGMII1G, &ehl_pse1_sgmii1g_info) },
+ { PCI_DEVICE_DATA(INTEL, EHL_PSE1_SGMII2G5, &ehl_pse1_sgmii1g_info) },
+ { PCI_DEVICE_DATA(INTEL, TGL_SGMII1G, &tgl_sgmii1g_phy0_info) },
+ { PCI_DEVICE_DATA(INTEL, TGLH_SGMII1G_0, &tgl_sgmii1g_phy0_info) },
+ { PCI_DEVICE_DATA(INTEL, TGLH_SGMII1G_1, &tgl_sgmii1g_phy1_info) },
+ { PCI_DEVICE_DATA(INTEL, ADLS_SGMII1G_0, &adls_sgmii1g_phy0_info) },
+ { PCI_DEVICE_DATA(INTEL, ADLS_SGMII1G_1, &adls_sgmii1g_phy1_info) },
+ { PCI_DEVICE_DATA(INTEL, ADLN_SGMII1G, &tgl_sgmii1g_phy0_info) },
+ { PCI_DEVICE_DATA(INTEL, RPLP_SGMII1G, &tgl_sgmii1g_phy0_info) },
+ {}
+};
+MODULE_DEVICE_TABLE(pci, intel_eth_pci_id_table);
+
+static struct pci_driver intel_eth_pci_driver = {
+ .name = "intel-eth-pci",
+ .id_table = intel_eth_pci_id_table,
+ .probe = intel_eth_pci_probe,
+ .remove = intel_eth_pci_remove,
+ .driver = {
+ .pm = &intel_eth_pm_ops,
+ },
+};
+
+module_pci_driver(intel_eth_pci_driver);
+
+MODULE_DESCRIPTION("INTEL 10/100/1000 Ethernet PCI driver");
+MODULE_AUTHOR("Voon Weifeng <weifeng.voon@intel.com>");
+MODULE_LICENSE("GPL v2");