diff options
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac/dwmac1000.h')
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac1000.h | 333 |
1 files changed, 333 insertions, 0 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h new file mode 100644 index 000000000..4296ddda8 --- /dev/null +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h @@ -0,0 +1,333 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/******************************************************************************* + Copyright (C) 2007-2009 STMicroelectronics Ltd + + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ +#ifndef __DWMAC1000_H__ +#define __DWMAC1000_H__ + +#include <linux/phy.h> +#include "common.h" + +#define GMAC_CONTROL 0x00000000 /* Configuration */ +#define GMAC_FRAME_FILTER 0x00000004 /* Frame Filter */ +#define GMAC_HASH_HIGH 0x00000008 /* Multicast Hash Table High */ +#define GMAC_HASH_LOW 0x0000000c /* Multicast Hash Table Low */ +#define GMAC_MII_ADDR 0x00000010 /* MII Address */ +#define GMAC_MII_DATA 0x00000014 /* MII Data */ +#define GMAC_FLOW_CTRL 0x00000018 /* Flow Control */ +#define GMAC_VLAN_TAG 0x0000001c /* VLAN Tag */ +#define GMAC_DEBUG 0x00000024 /* GMAC debug register */ +#define GMAC_WAKEUP_FILTER 0x00000028 /* Wake-up Frame Filter */ + +#define GMAC_INT_STATUS 0x00000038 /* interrupt status register */ +#define GMAC_INT_STATUS_PMT BIT(3) +#define GMAC_INT_STATUS_MMCIS BIT(4) +#define GMAC_INT_STATUS_MMCRIS BIT(5) +#define GMAC_INT_STATUS_MMCTIS BIT(6) +#define GMAC_INT_STATUS_MMCCSUM BIT(7) +#define GMAC_INT_STATUS_TSTAMP BIT(9) +#define GMAC_INT_STATUS_LPIIS BIT(10) + +/* interrupt mask register */ +#define GMAC_INT_MASK 0x0000003c +#define GMAC_INT_DISABLE_RGMII BIT(0) +#define GMAC_INT_DISABLE_PCSLINK BIT(1) +#define GMAC_INT_DISABLE_PCSAN BIT(2) +#define GMAC_INT_DISABLE_PMT BIT(3) +#define GMAC_INT_DISABLE_TIMESTAMP BIT(9) +#define GMAC_INT_DISABLE_PCS (GMAC_INT_DISABLE_RGMII | \ + GMAC_INT_DISABLE_PCSLINK | \ + GMAC_INT_DISABLE_PCSAN) +#define GMAC_INT_DEFAULT_MASK (GMAC_INT_DISABLE_TIMESTAMP | \ + GMAC_INT_DISABLE_PCS) + +/* PMT Control and Status */ +#define GMAC_PMT 0x0000002c +enum power_event { + pointer_reset = 0x80000000, + global_unicast = 0x00000200, + wake_up_rx_frame = 0x00000040, + magic_frame = 0x00000020, + wake_up_frame_en = 0x00000004, + magic_pkt_en = 0x00000002, + power_down = 0x00000001, +}; + +/* Energy Efficient Ethernet (EEE) + * + * LPI status, timer and control register offset + */ +#define LPI_CTRL_STATUS 0x0030 +#define LPI_TIMER_CTRL 0x0034 + +/* LPI control and status defines */ +#define LPI_CTRL_STATUS_LPITXA 0x00080000 /* Enable LPI TX Automate */ +#define LPI_CTRL_STATUS_PLSEN 0x00040000 /* Enable PHY Link Status */ +#define LPI_CTRL_STATUS_PLS 0x00020000 /* PHY Link Status */ +#define LPI_CTRL_STATUS_LPIEN 0x00010000 /* LPI Enable */ +#define LPI_CTRL_STATUS_RLPIST 0x00000200 /* Receive LPI state */ +#define LPI_CTRL_STATUS_TLPIST 0x00000100 /* Transmit LPI state */ +#define LPI_CTRL_STATUS_RLPIEX 0x00000008 /* Receive LPI Exit */ +#define LPI_CTRL_STATUS_RLPIEN 0x00000004 /* Receive LPI Entry */ +#define LPI_CTRL_STATUS_TLPIEX 0x00000002 /* Transmit LPI Exit */ +#define LPI_CTRL_STATUS_TLPIEN 0x00000001 /* Transmit LPI Entry */ + +/* GMAC HW ADDR regs */ +#define GMAC_ADDR_HIGH(reg) ((reg > 15) ? 0x00000800 + (reg - 16) * 8 : \ + 0x00000040 + (reg * 8)) +#define GMAC_ADDR_LOW(reg) ((reg > 15) ? 0x00000804 + (reg - 16) * 8 : \ + 0x00000044 + (reg * 8)) +#define GMAC_MAX_PERFECT_ADDRESSES 1 + +#define GMAC_PCS_BASE 0x000000c0 /* PCS register base */ +#define GMAC_RGSMIIIS 0x000000d8 /* RGMII/SMII status */ + +/* SGMII/RGMII status register */ +#define GMAC_RGSMIIIS_LNKMODE BIT(0) +#define GMAC_RGSMIIIS_SPEED GENMASK(2, 1) +#define GMAC_RGSMIIIS_SPEED_SHIFT 1 +#define GMAC_RGSMIIIS_LNKSTS BIT(3) +#define GMAC_RGSMIIIS_JABTO BIT(4) +#define GMAC_RGSMIIIS_FALSECARDET BIT(5) +#define GMAC_RGSMIIIS_SMIDRXS BIT(16) +/* LNKMOD */ +#define GMAC_RGSMIIIS_LNKMOD_MASK 0x1 +/* LNKSPEED */ +#define GMAC_RGSMIIIS_SPEED_125 0x2 +#define GMAC_RGSMIIIS_SPEED_25 0x1 +#define GMAC_RGSMIIIS_SPEED_2_5 0x0 + +/* GMAC Configuration defines */ +#define GMAC_CONTROL_2K 0x08000000 /* IEEE 802.3as 2K packets */ +#define GMAC_CONTROL_TC 0x01000000 /* Transmit Conf. in RGMII/SGMII */ +#define GMAC_CONTROL_WD 0x00800000 /* Disable Watchdog on receive */ +#define GMAC_CONTROL_JD 0x00400000 /* Jabber disable */ +#define GMAC_CONTROL_BE 0x00200000 /* Frame Burst Enable */ +#define GMAC_CONTROL_JE 0x00100000 /* Jumbo frame */ +enum inter_frame_gap { + GMAC_CONTROL_IFG_88 = 0x00040000, + GMAC_CONTROL_IFG_80 = 0x00020000, + GMAC_CONTROL_IFG_40 = 0x000e0000, +}; +#define GMAC_CONTROL_DCRS 0x00010000 /* Disable carrier sense */ +#define GMAC_CONTROL_PS 0x00008000 /* Port Select 0:GMI 1:MII */ +#define GMAC_CONTROL_FES 0x00004000 /* Speed 0:10 1:100 */ +#define GMAC_CONTROL_DO 0x00002000 /* Disable Rx Own */ +#define GMAC_CONTROL_LM 0x00001000 /* Loop-back mode */ +#define GMAC_CONTROL_DM 0x00000800 /* Duplex Mode */ +#define GMAC_CONTROL_IPC 0x00000400 /* Checksum Offload */ +#define GMAC_CONTROL_DR 0x00000200 /* Disable Retry */ +#define GMAC_CONTROL_LUD 0x00000100 /* Link up/down */ +#define GMAC_CONTROL_ACS 0x00000080 /* Auto Pad/FCS Stripping */ +#define GMAC_CONTROL_DC 0x00000010 /* Deferral Check */ +#define GMAC_CONTROL_TE 0x00000008 /* Transmitter Enable */ +#define GMAC_CONTROL_RE 0x00000004 /* Receiver Enable */ + +#define GMAC_CORE_INIT (GMAC_CONTROL_JD | GMAC_CONTROL_PS | \ + GMAC_CONTROL_BE | GMAC_CONTROL_DCRS) + +/* GMAC Frame Filter defines */ +#define GMAC_FRAME_FILTER_PR 0x00000001 /* Promiscuous Mode */ +#define GMAC_FRAME_FILTER_HUC 0x00000002 /* Hash Unicast */ +#define GMAC_FRAME_FILTER_HMC 0x00000004 /* Hash Multicast */ +#define GMAC_FRAME_FILTER_DAIF 0x00000008 /* DA Inverse Filtering */ +#define GMAC_FRAME_FILTER_PM 0x00000010 /* Pass all multicast */ +#define GMAC_FRAME_FILTER_DBF 0x00000020 /* Disable Broadcast frames */ +#define GMAC_FRAME_FILTER_PCF 0x00000080 /* Pass Control frames */ +#define GMAC_FRAME_FILTER_SAIF 0x00000100 /* Inverse Filtering */ +#define GMAC_FRAME_FILTER_SAF 0x00000200 /* Source Address Filter */ +#define GMAC_FRAME_FILTER_HPF 0x00000400 /* Hash or perfect Filter */ +#define GMAC_FRAME_FILTER_RA 0x80000000 /* Receive all mode */ +/* GMII ADDR defines */ +#define GMAC_MII_ADDR_WRITE 0x00000002 /* MII Write */ +#define GMAC_MII_ADDR_BUSY 0x00000001 /* MII Busy */ +/* GMAC FLOW CTRL defines */ +#define GMAC_FLOW_CTRL_PT_MASK 0xffff0000 /* Pause Time Mask */ +#define GMAC_FLOW_CTRL_PT_SHIFT 16 +#define GMAC_FLOW_CTRL_UP 0x00000008 /* Unicast pause frame enable */ +#define GMAC_FLOW_CTRL_RFE 0x00000004 /* Rx Flow Control Enable */ +#define GMAC_FLOW_CTRL_TFE 0x00000002 /* Tx Flow Control Enable */ +#define GMAC_FLOW_CTRL_FCB_BPA 0x00000001 /* Flow Control Busy ... */ + +/* DEBUG Register defines */ +/* MTL TxStatus FIFO */ +#define GMAC_DEBUG_TXSTSFSTS BIT(25) /* MTL TxStatus FIFO Full Status */ +#define GMAC_DEBUG_TXFSTS BIT(24) /* MTL Tx FIFO Not Empty Status */ +#define GMAC_DEBUG_TWCSTS BIT(22) /* MTL Tx FIFO Write Controller */ +/* MTL Tx FIFO Read Controller Status */ +#define GMAC_DEBUG_TRCSTS_MASK GENMASK(21, 20) +#define GMAC_DEBUG_TRCSTS_SHIFT 20 +#define GMAC_DEBUG_TRCSTS_IDLE 0 +#define GMAC_DEBUG_TRCSTS_READ 1 +#define GMAC_DEBUG_TRCSTS_TXW 2 +#define GMAC_DEBUG_TRCSTS_WRITE 3 +#define GMAC_DEBUG_TXPAUSED BIT(19) /* MAC Transmitter in PAUSE */ +/* MAC Transmit Frame Controller Status */ +#define GMAC_DEBUG_TFCSTS_MASK GENMASK(18, 17) +#define GMAC_DEBUG_TFCSTS_SHIFT 17 +#define GMAC_DEBUG_TFCSTS_IDLE 0 +#define GMAC_DEBUG_TFCSTS_WAIT 1 +#define GMAC_DEBUG_TFCSTS_GEN_PAUSE 2 +#define GMAC_DEBUG_TFCSTS_XFER 3 +/* MAC GMII or MII Transmit Protocol Engine Status */ +#define GMAC_DEBUG_TPESTS BIT(16) +#define GMAC_DEBUG_RXFSTS_MASK GENMASK(9, 8) /* MTL Rx FIFO Fill-level */ +#define GMAC_DEBUG_RXFSTS_SHIFT 8 +#define GMAC_DEBUG_RXFSTS_EMPTY 0 +#define GMAC_DEBUG_RXFSTS_BT 1 +#define GMAC_DEBUG_RXFSTS_AT 2 +#define GMAC_DEBUG_RXFSTS_FULL 3 +#define GMAC_DEBUG_RRCSTS_MASK GENMASK(6, 5) /* MTL Rx FIFO Read Controller */ +#define GMAC_DEBUG_RRCSTS_SHIFT 5 +#define GMAC_DEBUG_RRCSTS_IDLE 0 +#define GMAC_DEBUG_RRCSTS_RDATA 1 +#define GMAC_DEBUG_RRCSTS_RSTAT 2 +#define GMAC_DEBUG_RRCSTS_FLUSH 3 +#define GMAC_DEBUG_RWCSTS BIT(4) /* MTL Rx FIFO Write Controller Active */ +/* MAC Receive Frame Controller FIFO Status */ +#define GMAC_DEBUG_RFCFCSTS_MASK GENMASK(2, 1) +#define GMAC_DEBUG_RFCFCSTS_SHIFT 1 +/* MAC GMII or MII Receive Protocol Engine Status */ +#define GMAC_DEBUG_RPESTS BIT(0) + +/*--- DMA BLOCK defines ---*/ +/* DMA Bus Mode register defines */ +#define DMA_BUS_MODE_DA 0x00000002 /* Arbitration scheme */ +#define DMA_BUS_MODE_DSL_MASK 0x0000007c /* Descriptor Skip Length */ +#define DMA_BUS_MODE_DSL_SHIFT 2 /* (in DWORDS) */ +/* Programmable burst length (passed thorugh platform)*/ +#define DMA_BUS_MODE_PBL_MASK 0x00003f00 /* Programmable Burst Len */ +#define DMA_BUS_MODE_PBL_SHIFT 8 +#define DMA_BUS_MODE_ATDS 0x00000080 /* Alternate Descriptor Size */ + +enum rx_tx_priority_ratio { + double_ratio = 0x00004000, /* 2:1 */ + triple_ratio = 0x00008000, /* 3:1 */ + quadruple_ratio = 0x0000c000, /* 4:1 */ +}; + +#define DMA_BUS_MODE_FB 0x00010000 /* Fixed burst */ +#define DMA_BUS_MODE_MB 0x04000000 /* Mixed burst */ +#define DMA_BUS_MODE_RPBL_MASK 0x007e0000 /* Rx-Programmable Burst Len */ +#define DMA_BUS_MODE_RPBL_SHIFT 17 +#define DMA_BUS_MODE_USP 0x00800000 +#define DMA_BUS_MODE_MAXPBL 0x01000000 +#define DMA_BUS_MODE_AAL 0x02000000 + +/* DMA CRS Control and Status Register Mapping */ +#define DMA_HOST_TX_DESC 0x00001048 /* Current Host Tx descriptor */ +#define DMA_HOST_RX_DESC 0x0000104c /* Current Host Rx descriptor */ +/* DMA Bus Mode register defines */ +#define DMA_BUS_PR_RATIO_MASK 0x0000c000 /* Rx/Tx priority ratio */ +#define DMA_BUS_PR_RATIO_SHIFT 14 +#define DMA_BUS_FB 0x00010000 /* Fixed Burst */ + +/* DMA operation mode defines (start/stop tx/rx are placed in common header)*/ +/* Disable Drop TCP/IP csum error */ +#define DMA_CONTROL_DT 0x04000000 +#define DMA_CONTROL_RSF 0x02000000 /* Receive Store and Forward */ +#define DMA_CONTROL_DFF 0x01000000 /* Disaable flushing */ +/* Threshold for Activating the FC */ +enum rfa { + act_full_minus_1 = 0x00800000, + act_full_minus_2 = 0x00800200, + act_full_minus_3 = 0x00800400, + act_full_minus_4 = 0x00800600, +}; +/* Threshold for Deactivating the FC */ +enum rfd { + deac_full_minus_1 = 0x00400000, + deac_full_minus_2 = 0x00400800, + deac_full_minus_3 = 0x00401000, + deac_full_minus_4 = 0x00401800, +}; +#define DMA_CONTROL_TSF 0x00200000 /* Transmit Store and Forward */ + +enum ttc_control { + DMA_CONTROL_TTC_64 = 0x00000000, + DMA_CONTROL_TTC_128 = 0x00004000, + DMA_CONTROL_TTC_192 = 0x00008000, + DMA_CONTROL_TTC_256 = 0x0000c000, + DMA_CONTROL_TTC_40 = 0x00010000, + DMA_CONTROL_TTC_32 = 0x00014000, + DMA_CONTROL_TTC_24 = 0x00018000, + DMA_CONTROL_TTC_16 = 0x0001c000, +}; +#define DMA_CONTROL_TC_TX_MASK 0xfffe3fff + +#define DMA_CONTROL_EFC 0x00000100 +#define DMA_CONTROL_FEF 0x00000080 +#define DMA_CONTROL_FUF 0x00000040 + +/* Receive flow control activation field + * RFA field in DMA control register, bits 23,10:9 + */ +#define DMA_CONTROL_RFA_MASK 0x00800600 + +/* Receive flow control deactivation field + * RFD field in DMA control register, bits 22,12:11 + */ +#define DMA_CONTROL_RFD_MASK 0x00401800 + +/* RFD and RFA fields are encoded as follows + * + * Bit Field + * 0,00 - Full minus 1KB (only valid when rxfifo >= 4KB and EFC enabled) + * 0,01 - Full minus 2KB (only valid when rxfifo >= 4KB and EFC enabled) + * 0,10 - Full minus 3KB (only valid when rxfifo >= 4KB and EFC enabled) + * 0,11 - Full minus 4KB (only valid when rxfifo > 4KB and EFC enabled) + * 1,00 - Full minus 5KB (only valid when rxfifo > 8KB and EFC enabled) + * 1,01 - Full minus 6KB (only valid when rxfifo > 8KB and EFC enabled) + * 1,10 - Full minus 7KB (only valid when rxfifo > 8KB and EFC enabled) + * 1,11 - Reserved + * + * RFD should always be > RFA for a given FIFO size. RFD == RFA may work, + * but packet throughput performance may not be as expected. + * + * Be sure that bit 3 in GMAC Register 6 is set for Unicast Pause frame + * detection (IEEE Specification Requirement, Annex 31B, 31B.1, Pause + * Description). + * + * Be sure that DZPA (bit 7 in Flow Control Register, GMAC Register 6), + * is set to 0. This allows pause frames with a quanta of 0 to be sent + * as an XOFF message to the link peer. + */ + +#define RFA_FULL_MINUS_1K 0x00000000 +#define RFA_FULL_MINUS_2K 0x00000200 +#define RFA_FULL_MINUS_3K 0x00000400 +#define RFA_FULL_MINUS_4K 0x00000600 +#define RFA_FULL_MINUS_5K 0x00800000 +#define RFA_FULL_MINUS_6K 0x00800200 +#define RFA_FULL_MINUS_7K 0x00800400 + +#define RFD_FULL_MINUS_1K 0x00000000 +#define RFD_FULL_MINUS_2K 0x00000800 +#define RFD_FULL_MINUS_3K 0x00001000 +#define RFD_FULL_MINUS_4K 0x00001800 +#define RFD_FULL_MINUS_5K 0x00400000 +#define RFD_FULL_MINUS_6K 0x00400800 +#define RFD_FULL_MINUS_7K 0x00401000 + +enum rtc_control { + DMA_CONTROL_RTC_64 = 0x00000000, + DMA_CONTROL_RTC_32 = 0x00000008, + DMA_CONTROL_RTC_96 = 0x00000010, + DMA_CONTROL_RTC_128 = 0x00000018, +}; +#define DMA_CONTROL_TC_RX_MASK 0xffffffe7 + +#define DMA_CONTROL_OSF 0x00000004 /* Operate on second frame */ + +/* MMC registers offset */ +#define GMAC_MMC_CTRL 0x100 +#define GMAC_MMC_RX_INTR 0x104 +#define GMAC_MMC_TX_INTR 0x108 +#define GMAC_MMC_RX_CSUM_OFFLOAD 0x208 +#define GMAC_EXTHASH_BASE 0x500 + +extern const struct stmmac_dma_ops dwmac1000_dma_ops; +#endif /* __DWMAC1000_H__ */ |