summaryrefslogtreecommitdiffstats
path: root/drivers/net/wan/hd64570.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wan/hd64570.h')
-rw-r--r--drivers/net/wan/hd64570.h242
1 files changed, 242 insertions, 0 deletions
diff --git a/drivers/net/wan/hd64570.h b/drivers/net/wan/hd64570.h
new file mode 100644
index 000000000..24529996c
--- /dev/null
+++ b/drivers/net/wan/hd64570.h
@@ -0,0 +1,242 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __HD64570_H
+#define __HD64570_H
+
+/* SCA HD64570 register definitions - all addresses for mode 0 (8086 MPU)
+ and 1 (64180 MPU). For modes 2 and 3, XOR the address with 0x01.
+
+ Source: HD64570 SCA User's Manual
+*/
+
+
+
+/* SCA Control Registers */
+#define LPR 0x00 /* Low Power */
+
+/* Wait controller registers */
+#define PABR0 0x02 /* Physical Address Boundary 0 */
+#define PABR1 0x03 /* Physical Address Boundary 1 */
+#define WCRL 0x04 /* Wait Control L */
+#define WCRM 0x05 /* Wait Control M */
+#define WCRH 0x06 /* Wait Control H */
+
+#define PCR 0x08 /* DMA Priority Control */
+#define DMER 0x09 /* DMA Master Enable */
+
+
+/* Interrupt registers */
+#define ISR0 0x10 /* Interrupt Status 0 */
+#define ISR1 0x11 /* Interrupt Status 1 */
+#define ISR2 0x12 /* Interrupt Status 2 */
+
+#define IER0 0x14 /* Interrupt Enable 0 */
+#define IER1 0x15 /* Interrupt Enable 1 */
+#define IER2 0x16 /* Interrupt Enable 2 */
+
+#define ITCR 0x18 /* Interrupt Control */
+#define IVR 0x1A /* Interrupt Vector */
+#define IMVR 0x1C /* Interrupt Modified Vector */
+
+
+
+/* MSCI channel (port) 0 registers - offset 0x20
+ MSCI channel (port) 1 registers - offset 0x40 */
+
+#define MSCI0_OFFSET 0x20
+#define MSCI1_OFFSET 0x40
+
+#define TRBL 0x00 /* TX/RX buffer L */
+#define TRBH 0x01 /* TX/RX buffer H */
+#define ST0 0x02 /* Status 0 */
+#define ST1 0x03 /* Status 1 */
+#define ST2 0x04 /* Status 2 */
+#define ST3 0x05 /* Status 3 */
+#define FST 0x06 /* Frame Status */
+#define IE0 0x08 /* Interrupt Enable 0 */
+#define IE1 0x09 /* Interrupt Enable 1 */
+#define IE2 0x0A /* Interrupt Enable 2 */
+#define FIE 0x0B /* Frame Interrupt Enable */
+#define CMD 0x0C /* Command */
+#define MD0 0x0E /* Mode 0 */
+#define MD1 0x0F /* Mode 1 */
+#define MD2 0x10 /* Mode 2 */
+#define CTL 0x11 /* Control */
+#define SA0 0x12 /* Sync/Address 0 */
+#define SA1 0x13 /* Sync/Address 1 */
+#define IDL 0x14 /* Idle Pattern */
+#define TMC 0x15 /* Time Constant */
+#define RXS 0x16 /* RX Clock Source */
+#define TXS 0x17 /* TX Clock Source */
+#define TRC0 0x18 /* TX Ready Control 0 */
+#define TRC1 0x19 /* TX Ready Control 1 */
+#define RRC 0x1A /* RX Ready Control */
+#define CST0 0x1C /* Current Status 0 */
+#define CST1 0x1D /* Current Status 1 */
+
+
+/* Timer channel 0 (port 0 RX) registers - offset 0x60
+ Timer channel 1 (port 0 TX) registers - offset 0x68
+ Timer channel 2 (port 1 RX) registers - offset 0x70
+ Timer channel 3 (port 1 TX) registers - offset 0x78
+*/
+
+#define TIMER0RX_OFFSET 0x60
+#define TIMER0TX_OFFSET 0x68
+#define TIMER1RX_OFFSET 0x70
+#define TIMER1TX_OFFSET 0x78
+
+#define TCNTL 0x00 /* Up-counter L */
+#define TCNTH 0x01 /* Up-counter H */
+#define TCONRL 0x02 /* Constant L */
+#define TCONRH 0x03 /* Constant H */
+#define TCSR 0x04 /* Control/Status */
+#define TEPR 0x05 /* Expand Prescale */
+
+
+
+/* DMA channel 0 (port 0 RX) registers - offset 0x80
+ DMA channel 1 (port 0 TX) registers - offset 0xA0
+ DMA channel 2 (port 1 RX) registers - offset 0xC0
+ DMA channel 3 (port 1 TX) registers - offset 0xE0
+*/
+
+#define DMAC0RX_OFFSET 0x80
+#define DMAC0TX_OFFSET 0xA0
+#define DMAC1RX_OFFSET 0xC0
+#define DMAC1TX_OFFSET 0xE0
+
+#define BARL 0x00 /* Buffer Address L (chained block) */
+#define BARH 0x01 /* Buffer Address H (chained block) */
+#define BARB 0x02 /* Buffer Address B (chained block) */
+
+#define DARL 0x00 /* RX Destination Addr L (single block) */
+#define DARH 0x01 /* RX Destination Addr H (single block) */
+#define DARB 0x02 /* RX Destination Addr B (single block) */
+
+#define SARL 0x04 /* TX Source Address L (single block) */
+#define SARH 0x05 /* TX Source Address H (single block) */
+#define SARB 0x06 /* TX Source Address B (single block) */
+
+#define CPB 0x06 /* Chain Pointer Base (chained block) */
+
+#define CDAL 0x08 /* Current Descriptor Addr L (chained block) */
+#define CDAH 0x09 /* Current Descriptor Addr H (chained block) */
+#define EDAL 0x0A /* Error Descriptor Addr L (chained block) */
+#define EDAH 0x0B /* Error Descriptor Addr H (chained block) */
+#define BFLL 0x0C /* RX Receive Buffer Length L (chained block)*/
+#define BFLH 0x0D /* RX Receive Buffer Length H (chained block)*/
+#define BCRL 0x0E /* Byte Count L */
+#define BCRH 0x0F /* Byte Count H */
+#define DSR 0x10 /* DMA Status */
+#define DSR_RX(node) (DSR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET))
+#define DSR_TX(node) (DSR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET))
+#define DMR 0x11 /* DMA Mode */
+#define DMR_RX(node) (DMR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET))
+#define DMR_TX(node) (DMR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET))
+#define FCT 0x13 /* Frame End Interrupt Counter */
+#define FCT_RX(node) (FCT + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET))
+#define FCT_TX(node) (FCT + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET))
+#define DIR 0x14 /* DMA Interrupt Enable */
+#define DIR_RX(node) (DIR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET))
+#define DIR_TX(node) (DIR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET))
+#define DCR 0x15 /* DMA Command */
+#define DCR_RX(node) (DCR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET))
+#define DCR_TX(node) (DCR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET))
+
+
+
+
+/* Descriptor Structure */
+
+typedef struct {
+ u16 cp; /* Chain Pointer */
+ u32 bp; /* Buffer Pointer (24 bits) */
+ u16 len; /* Data Length */
+ u8 stat; /* Status */
+ u8 unused; /* pads to 2-byte boundary */
+}__packed pkt_desc;
+
+
+/* Packet Descriptor Status bits */
+
+#define ST_TX_EOM 0x80 /* End of frame */
+#define ST_TX_EOT 0x01 /* End of transmission */
+
+#define ST_RX_EOM 0x80 /* End of frame */
+#define ST_RX_SHORT 0x40 /* Short frame */
+#define ST_RX_ABORT 0x20 /* Abort */
+#define ST_RX_RESBIT 0x10 /* Residual bit */
+#define ST_RX_OVERRUN 0x08 /* Overrun */
+#define ST_RX_CRC 0x04 /* CRC */
+
+#define ST_ERROR_MASK 0x7C
+
+#define DIR_EOTE 0x80 /* Transfer completed */
+#define DIR_EOME 0x40 /* Frame Transfer Completed (chained-block) */
+#define DIR_BOFE 0x20 /* Buffer Overflow/Underflow (chained-block)*/
+#define DIR_COFE 0x10 /* Counter Overflow (chained-block) */
+
+
+#define DSR_EOT 0x80 /* Transfer completed */
+#define DSR_EOM 0x40 /* Frame Transfer Completed (chained-block) */
+#define DSR_BOF 0x20 /* Buffer Overflow/Underflow (chained-block)*/
+#define DSR_COF 0x10 /* Counter Overflow (chained-block) */
+#define DSR_DE 0x02 /* DMA Enable */
+#define DSR_DWE 0x01 /* DMA Write Disable */
+
+/* DMA Master Enable Register (DMER) bits */
+#define DMER_DME 0x80 /* DMA Master Enable */
+
+
+#define CMD_RESET 0x21 /* Reset Channel */
+#define CMD_TX_ENABLE 0x02 /* Start transmitter */
+#define CMD_RX_ENABLE 0x12 /* Start receiver */
+
+#define MD0_HDLC 0x80 /* Bit-sync HDLC mode */
+#define MD0_CRC_ENA 0x04 /* Enable CRC code calculation */
+#define MD0_CRC_CCITT 0x02 /* CCITT CRC instead of CRC-16 */
+#define MD0_CRC_PR1 0x01 /* Initial all-ones instead of all-zeros */
+
+#define MD0_CRC_NONE 0x00
+#define MD0_CRC_16_0 0x04
+#define MD0_CRC_16 0x05
+#define MD0_CRC_ITU_0 0x06
+#define MD0_CRC_ITU 0x07
+
+#define MD2_NRZ 0x00
+#define MD2_NRZI 0x20
+#define MD2_MANCHESTER 0x80
+#define MD2_FM_MARK 0xA0
+#define MD2_FM_SPACE 0xC0
+#define MD2_LOOPBACK 0x03 /* Local data Loopback */
+
+#define CTL_NORTS 0x01
+#define CTL_IDLE 0x10 /* Transmit an idle pattern */
+#define CTL_UDRNC 0x20 /* Idle after CRC or FCS+flag transmission */
+
+#define ST0_TXRDY 0x02 /* TX ready */
+#define ST0_RXRDY 0x01 /* RX ready */
+
+#define ST1_UDRN 0x80 /* MSCI TX underrun */
+#define ST1_CDCD 0x04 /* DCD level changed */
+
+#define ST3_CTS 0x08 /* modem input - /CTS */
+#define ST3_DCD 0x04 /* modem input - /DCD */
+
+#define IE0_TXINT 0x80 /* TX INT MSCI interrupt enable */
+#define IE0_RXINTA 0x40 /* RX INT A MSCI interrupt enable */
+#define IE1_UDRN 0x80 /* TX underrun MSCI interrupt enable */
+#define IE1_CDCD 0x04 /* DCD level changed */
+
+#define DCR_ABORT 0x01 /* Software abort command */
+#define DCR_CLEAR_EOF 0x02 /* Clear EOF interrupt */
+
+/* TX and RX Clock Source - RXS and TXS */
+#define CLK_BRG_MASK 0x0F
+#define CLK_LINE_RX 0x00 /* TX/RX clock line input */
+#define CLK_LINE_TX 0x00 /* TX/RX line input */
+#define CLK_BRG_RX 0x40 /* internal baud rate generator */
+#define CLK_BRG_TX 0x40 /* internal baud rate generator */
+#define CLK_RXCLK_TX 0x60 /* TX clock from RX clock */
+
+#endif