diff options
Diffstat (limited to '')
-rw-r--r-- | drivers/nfc/s3fwrn5/Kconfig | 34 | ||||
-rw-r--r-- | drivers/nfc/s3fwrn5/Makefile | 12 | ||||
-rw-r--r-- | drivers/nfc/s3fwrn5/core.c | 227 | ||||
-rw-r--r-- | drivers/nfc/s3fwrn5/firmware.c | 496 | ||||
-rw-r--r-- | drivers/nfc/s3fwrn5/firmware.h | 101 | ||||
-rw-r--r-- | drivers/nfc/s3fwrn5/i2c.c | 283 | ||||
-rw-r--r-- | drivers/nfc/s3fwrn5/nci.c | 119 | ||||
-rw-r--r-- | drivers/nfc/s3fwrn5/nci.h | 56 | ||||
-rw-r--r-- | drivers/nfc/s3fwrn5/phy_common.c | 76 | ||||
-rw-r--r-- | drivers/nfc/s3fwrn5/phy_common.h | 37 | ||||
-rw-r--r-- | drivers/nfc/s3fwrn5/s3fwrn5.h | 87 | ||||
-rw-r--r-- | drivers/nfc/s3fwrn5/uart.c | 196 |
12 files changed, 1724 insertions, 0 deletions
diff --git a/drivers/nfc/s3fwrn5/Kconfig b/drivers/nfc/s3fwrn5/Kconfig new file mode 100644 index 000000000..8a6b1a79d --- /dev/null +++ b/drivers/nfc/s3fwrn5/Kconfig @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: GPL-2.0-only +config NFC_S3FWRN5 + tristate + select CRYPTO + select CRYPTO_HASH + help + Core driver for Samsung S3FWRN5 NFC chip. Contains core utilities + of chip. It's intended to be used by PHYs to avoid duplicating lots + of common code. + +config NFC_S3FWRN5_I2C + tristate "Samsung S3FWRN5 I2C support" + depends on NFC_NCI && I2C + select NFC_S3FWRN5 + default n + help + This module adds support for an I2C interface to the S3FWRN5 chip. + Select this if your platform is using the I2C bus. + + To compile this driver as a module, choose m here. The module will + be called s3fwrn5_i2c.ko. + Say N if unsure. + +config NFC_S3FWRN82_UART + tristate "Samsung S3FWRN82 UART support" + depends on NFC_NCI && SERIAL_DEV_BUS + select NFC_S3FWRN5 + help + This module adds support for a UART interface to the S3FWRN82 chip. + Select this if your platform is using the UART bus. + + To compile this driver as a module, choose m here. The module will + be called s3fwrn82_uart.ko. + Say N if unsure. diff --git a/drivers/nfc/s3fwrn5/Makefile b/drivers/nfc/s3fwrn5/Makefile new file mode 100644 index 000000000..7da827ac1 --- /dev/null +++ b/drivers/nfc/s3fwrn5/Makefile @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Makefile for Samsung S3FWRN5 NFC driver +# + +s3fwrn5-objs = core.o firmware.o nci.o phy_common.o +s3fwrn5_i2c-objs = i2c.o +s3fwrn82_uart-objs = uart.o + +obj-$(CONFIG_NFC_S3FWRN5) += s3fwrn5.o +obj-$(CONFIG_NFC_S3FWRN5_I2C) += s3fwrn5_i2c.o +obj-$(CONFIG_NFC_S3FWRN82_UART) += s3fwrn82_uart.o diff --git a/drivers/nfc/s3fwrn5/core.c b/drivers/nfc/s3fwrn5/core.c new file mode 100644 index 000000000..aec356880 --- /dev/null +++ b/drivers/nfc/s3fwrn5/core.c @@ -0,0 +1,227 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * NCI based driver for Samsung S3FWRN5 NFC chip + * + * Copyright (C) 2015 Samsung Electrnoics + * Robert Baldyga <r.baldyga@samsung.com> + */ + +#include <linux/module.h> +#include <net/nfc/nci_core.h> + +#include "s3fwrn5.h" +#include "firmware.h" +#include "nci.h" + +#define S3FWRN5_NFC_PROTOCOLS (NFC_PROTO_JEWEL_MASK | \ + NFC_PROTO_MIFARE_MASK | \ + NFC_PROTO_FELICA_MASK | \ + NFC_PROTO_ISO14443_MASK | \ + NFC_PROTO_ISO14443_B_MASK | \ + NFC_PROTO_ISO15693_MASK) + +static int s3fwrn5_firmware_init(struct s3fwrn5_info *info) +{ + struct s3fwrn5_fw_info *fw_info = &info->fw_info; + int ret; + + s3fwrn5_fw_init(fw_info, "sec_s3fwrn5_firmware.bin"); + + /* Get firmware data */ + ret = s3fwrn5_fw_request_firmware(fw_info); + if (ret < 0) + dev_err(&fw_info->ndev->nfc_dev->dev, + "Failed to get fw file, ret=%02x\n", ret); + return ret; +} + +static int s3fwrn5_firmware_update(struct s3fwrn5_info *info) +{ + bool need_update; + int ret; + + /* Update firmware */ + + s3fwrn5_set_wake(info, false); + s3fwrn5_set_mode(info, S3FWRN5_MODE_FW); + + ret = s3fwrn5_fw_setup(&info->fw_info); + if (ret < 0) + return ret; + + need_update = s3fwrn5_fw_check_version(&info->fw_info, + info->ndev->manufact_specific_info); + if (!need_update) + goto out; + + dev_info(&info->ndev->nfc_dev->dev, "Detected new firmware version\n"); + + ret = s3fwrn5_fw_download(&info->fw_info); + if (ret < 0) + goto out; + + /* Update RF configuration */ + + s3fwrn5_set_mode(info, S3FWRN5_MODE_NCI); + + s3fwrn5_set_wake(info, true); + ret = s3fwrn5_nci_rf_configure(info, "sec_s3fwrn5_rfreg.bin"); + s3fwrn5_set_wake(info, false); + +out: + s3fwrn5_set_mode(info, S3FWRN5_MODE_COLD); + s3fwrn5_fw_cleanup(&info->fw_info); + return ret; +} + +static int s3fwrn5_nci_open(struct nci_dev *ndev) +{ + struct s3fwrn5_info *info = nci_get_drvdata(ndev); + + if (s3fwrn5_get_mode(info) != S3FWRN5_MODE_COLD) + return -EBUSY; + + s3fwrn5_set_mode(info, S3FWRN5_MODE_NCI); + s3fwrn5_set_wake(info, true); + + return 0; +} + +static int s3fwrn5_nci_close(struct nci_dev *ndev) +{ + struct s3fwrn5_info *info = nci_get_drvdata(ndev); + + s3fwrn5_set_wake(info, false); + s3fwrn5_set_mode(info, S3FWRN5_MODE_COLD); + + return 0; +} + +static int s3fwrn5_nci_send(struct nci_dev *ndev, struct sk_buff *skb) +{ + struct s3fwrn5_info *info = nci_get_drvdata(ndev); + int ret; + + mutex_lock(&info->mutex); + + if (s3fwrn5_get_mode(info) != S3FWRN5_MODE_NCI) { + kfree_skb(skb); + mutex_unlock(&info->mutex); + return -EINVAL; + } + + ret = s3fwrn5_write(info, skb); + if (ret < 0) { + kfree_skb(skb); + mutex_unlock(&info->mutex); + return ret; + } + + consume_skb(skb); + mutex_unlock(&info->mutex); + return 0; +} + +static int s3fwrn5_nci_post_setup(struct nci_dev *ndev) +{ + struct s3fwrn5_info *info = nci_get_drvdata(ndev); + int ret; + + if (s3fwrn5_firmware_init(info)) { + //skip bootloader mode + return 0; + } + + ret = s3fwrn5_firmware_update(info); + if (ret < 0) + return ret; + + /* NCI core reset */ + + s3fwrn5_set_mode(info, S3FWRN5_MODE_NCI); + s3fwrn5_set_wake(info, true); + + ret = nci_core_reset(info->ndev); + if (ret < 0) + return ret; + + return nci_core_init(info->ndev); +} + +static const struct nci_ops s3fwrn5_nci_ops = { + .open = s3fwrn5_nci_open, + .close = s3fwrn5_nci_close, + .send = s3fwrn5_nci_send, + .post_setup = s3fwrn5_nci_post_setup, + .prop_ops = s3fwrn5_nci_prop_ops, + .n_prop_ops = ARRAY_SIZE(s3fwrn5_nci_prop_ops), +}; + +int s3fwrn5_probe(struct nci_dev **ndev, void *phy_id, struct device *pdev, + const struct s3fwrn5_phy_ops *phy_ops) +{ + struct s3fwrn5_info *info; + int ret; + + info = devm_kzalloc(pdev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->phy_id = phy_id; + info->pdev = pdev; + info->phy_ops = phy_ops; + mutex_init(&info->mutex); + + s3fwrn5_set_mode(info, S3FWRN5_MODE_COLD); + + info->ndev = nci_allocate_device(&s3fwrn5_nci_ops, + S3FWRN5_NFC_PROTOCOLS, 0, 0); + if (!info->ndev) + return -ENOMEM; + + nci_set_parent_dev(info->ndev, pdev); + nci_set_drvdata(info->ndev, info); + + ret = nci_register_device(info->ndev); + if (ret < 0) { + nci_free_device(info->ndev); + return ret; + } + + info->fw_info.ndev = info->ndev; + + *ndev = info->ndev; + + return ret; +} +EXPORT_SYMBOL(s3fwrn5_probe); + +void s3fwrn5_remove(struct nci_dev *ndev) +{ + struct s3fwrn5_info *info = nci_get_drvdata(ndev); + + s3fwrn5_set_mode(info, S3FWRN5_MODE_COLD); + + nci_unregister_device(ndev); + nci_free_device(ndev); +} +EXPORT_SYMBOL(s3fwrn5_remove); + +int s3fwrn5_recv_frame(struct nci_dev *ndev, struct sk_buff *skb, + enum s3fwrn5_mode mode) +{ + switch (mode) { + case S3FWRN5_MODE_NCI: + return nci_recv_frame(ndev, skb); + case S3FWRN5_MODE_FW: + return s3fwrn5_fw_recv_frame(ndev, skb); + default: + kfree_skb(skb); + return -ENODEV; + } +} +EXPORT_SYMBOL(s3fwrn5_recv_frame); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Samsung S3FWRN5 NFC driver"); +MODULE_AUTHOR("Robert Baldyga <r.baldyga@samsung.com>"); diff --git a/drivers/nfc/s3fwrn5/firmware.c b/drivers/nfc/s3fwrn5/firmware.c new file mode 100644 index 000000000..c20fdbac5 --- /dev/null +++ b/drivers/nfc/s3fwrn5/firmware.c @@ -0,0 +1,496 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * NCI based driver for Samsung S3FWRN5 NFC chip + * + * Copyright (C) 2015 Samsung Electrnoics + * Robert Baldyga <r.baldyga@samsung.com> + */ + +#include <linux/completion.h> +#include <linux/firmware.h> +#include <crypto/hash.h> +#include <crypto/sha1.h> + +#include "s3fwrn5.h" +#include "firmware.h" + +struct s3fwrn5_fw_version { + __u8 major; + __u8 build1; + __u8 build2; + __u8 target; +}; + +static int s3fwrn5_fw_send_msg(struct s3fwrn5_fw_info *fw_info, + struct sk_buff *msg, struct sk_buff **rsp) +{ + struct s3fwrn5_info *info = + container_of(fw_info, struct s3fwrn5_info, fw_info); + long ret; + + reinit_completion(&fw_info->completion); + + ret = s3fwrn5_write(info, msg); + if (ret < 0) + return ret; + + ret = wait_for_completion_interruptible_timeout( + &fw_info->completion, msecs_to_jiffies(1000)); + if (ret < 0) + return ret; + else if (ret == 0) + return -ENXIO; + + if (!fw_info->rsp) + return -EINVAL; + + *rsp = fw_info->rsp; + fw_info->rsp = NULL; + + return 0; +} + +static int s3fwrn5_fw_prep_msg(struct s3fwrn5_fw_info *fw_info, + struct sk_buff **msg, u8 type, u8 code, const void *data, u16 len) +{ + struct s3fwrn5_fw_header hdr; + struct sk_buff *skb; + + hdr.type = type | fw_info->parity; + fw_info->parity ^= 0x80; + hdr.code = code; + hdr.len = len; + + skb = alloc_skb(S3FWRN5_FW_HDR_SIZE + len, GFP_KERNEL); + if (!skb) + return -ENOMEM; + + skb_put_data(skb, &hdr, S3FWRN5_FW_HDR_SIZE); + if (len) + skb_put_data(skb, data, len); + + *msg = skb; + + return 0; +} + +static int s3fwrn5_fw_get_bootinfo(struct s3fwrn5_fw_info *fw_info, + struct s3fwrn5_fw_cmd_get_bootinfo_rsp *bootinfo) +{ + struct sk_buff *msg, *rsp = NULL; + struct s3fwrn5_fw_header *hdr; + int ret; + + /* Send GET_BOOTINFO command */ + + ret = s3fwrn5_fw_prep_msg(fw_info, &msg, S3FWRN5_FW_MSG_CMD, + S3FWRN5_FW_CMD_GET_BOOTINFO, NULL, 0); + if (ret < 0) + return ret; + + ret = s3fwrn5_fw_send_msg(fw_info, msg, &rsp); + kfree_skb(msg); + if (ret < 0) + return ret; + + hdr = (struct s3fwrn5_fw_header *) rsp->data; + if (hdr->code != S3FWRN5_FW_RET_SUCCESS) { + ret = -EINVAL; + goto out; + } + + memcpy(bootinfo, rsp->data + S3FWRN5_FW_HDR_SIZE, 10); + +out: + kfree_skb(rsp); + return ret; +} + +static int s3fwrn5_fw_enter_update_mode(struct s3fwrn5_fw_info *fw_info, + const void *hash_data, u16 hash_size, + const void *sig_data, u16 sig_size) +{ + struct s3fwrn5_fw_cmd_enter_updatemode args; + struct sk_buff *msg, *rsp = NULL; + struct s3fwrn5_fw_header *hdr; + int ret; + + /* Send ENTER_UPDATE_MODE command */ + + args.hashcode_size = hash_size; + args.signature_size = sig_size; + + ret = s3fwrn5_fw_prep_msg(fw_info, &msg, S3FWRN5_FW_MSG_CMD, + S3FWRN5_FW_CMD_ENTER_UPDATE_MODE, &args, sizeof(args)); + if (ret < 0) + return ret; + + ret = s3fwrn5_fw_send_msg(fw_info, msg, &rsp); + kfree_skb(msg); + if (ret < 0) + return ret; + + hdr = (struct s3fwrn5_fw_header *) rsp->data; + if (hdr->code != S3FWRN5_FW_RET_SUCCESS) { + ret = -EPROTO; + goto out; + } + + kfree_skb(rsp); + + /* Send hashcode data */ + + ret = s3fwrn5_fw_prep_msg(fw_info, &msg, S3FWRN5_FW_MSG_DATA, 0, + hash_data, hash_size); + if (ret < 0) + return ret; + + ret = s3fwrn5_fw_send_msg(fw_info, msg, &rsp); + kfree_skb(msg); + if (ret < 0) + return ret; + + hdr = (struct s3fwrn5_fw_header *) rsp->data; + if (hdr->code != S3FWRN5_FW_RET_SUCCESS) { + ret = -EPROTO; + goto out; + } + + kfree_skb(rsp); + + /* Send signature data */ + + ret = s3fwrn5_fw_prep_msg(fw_info, &msg, S3FWRN5_FW_MSG_DATA, 0, + sig_data, sig_size); + if (ret < 0) + return ret; + + ret = s3fwrn5_fw_send_msg(fw_info, msg, &rsp); + kfree_skb(msg); + if (ret < 0) + return ret; + + hdr = (struct s3fwrn5_fw_header *) rsp->data; + if (hdr->code != S3FWRN5_FW_RET_SUCCESS) + ret = -EPROTO; + +out: + kfree_skb(rsp); + return ret; +} + +static int s3fwrn5_fw_update_sector(struct s3fwrn5_fw_info *fw_info, + u32 base_addr, const void *data) +{ + struct s3fwrn5_fw_cmd_update_sector args; + struct sk_buff *msg, *rsp = NULL; + struct s3fwrn5_fw_header *hdr; + int ret, i; + + /* Send UPDATE_SECTOR command */ + + args.base_address = base_addr; + + ret = s3fwrn5_fw_prep_msg(fw_info, &msg, S3FWRN5_FW_MSG_CMD, + S3FWRN5_FW_CMD_UPDATE_SECTOR, &args, sizeof(args)); + if (ret < 0) + return ret; + + ret = s3fwrn5_fw_send_msg(fw_info, msg, &rsp); + kfree_skb(msg); + if (ret < 0) + return ret; + + hdr = (struct s3fwrn5_fw_header *) rsp->data; + if (hdr->code != S3FWRN5_FW_RET_SUCCESS) { + ret = -EPROTO; + goto err; + } + + kfree_skb(rsp); + + /* Send data split into 256-byte packets */ + + for (i = 0; i < 16; ++i) { + ret = s3fwrn5_fw_prep_msg(fw_info, &msg, + S3FWRN5_FW_MSG_DATA, 0, data+256*i, 256); + if (ret < 0) + break; + + ret = s3fwrn5_fw_send_msg(fw_info, msg, &rsp); + kfree_skb(msg); + if (ret < 0) + break; + + hdr = (struct s3fwrn5_fw_header *) rsp->data; + if (hdr->code != S3FWRN5_FW_RET_SUCCESS) { + ret = -EPROTO; + goto err; + } + + kfree_skb(rsp); + } + + return ret; + +err: + kfree_skb(rsp); + return ret; +} + +static int s3fwrn5_fw_complete_update_mode(struct s3fwrn5_fw_info *fw_info) +{ + struct sk_buff *msg, *rsp = NULL; + struct s3fwrn5_fw_header *hdr; + int ret; + + /* Send COMPLETE_UPDATE_MODE command */ + + ret = s3fwrn5_fw_prep_msg(fw_info, &msg, S3FWRN5_FW_MSG_CMD, + S3FWRN5_FW_CMD_COMPLETE_UPDATE_MODE, NULL, 0); + if (ret < 0) + return ret; + + ret = s3fwrn5_fw_send_msg(fw_info, msg, &rsp); + kfree_skb(msg); + if (ret < 0) + return ret; + + hdr = (struct s3fwrn5_fw_header *) rsp->data; + if (hdr->code != S3FWRN5_FW_RET_SUCCESS) + ret = -EPROTO; + + kfree_skb(rsp); + + return ret; +} + +/* + * Firmware header structure: + * + * 0x00 - 0x0B : Date and time string (w/o NUL termination) + * 0x10 - 0x13 : Firmware version + * 0x14 - 0x17 : Signature address + * 0x18 - 0x1B : Signature size + * 0x1C - 0x1F : Firmware image address + * 0x20 - 0x23 : Firmware sectors count + * 0x24 - 0x27 : Custom signature address + * 0x28 - 0x2B : Custom signature size + */ + +#define S3FWRN5_FW_IMAGE_HEADER_SIZE 44 + +int s3fwrn5_fw_request_firmware(struct s3fwrn5_fw_info *fw_info) +{ + struct s3fwrn5_fw_image *fw = &fw_info->fw; + u32 sig_off; + u32 image_off; + u32 custom_sig_off; + int ret; + + ret = request_firmware(&fw->fw, fw_info->fw_name, + &fw_info->ndev->nfc_dev->dev); + if (ret < 0) + return ret; + + if (fw->fw->size < S3FWRN5_FW_IMAGE_HEADER_SIZE) { + release_firmware(fw->fw); + return -EINVAL; + } + + memcpy(fw->date, fw->fw->data + 0x00, 12); + fw->date[12] = '\0'; + + memcpy(&fw->version, fw->fw->data + 0x10, 4); + + memcpy(&sig_off, fw->fw->data + 0x14, 4); + fw->sig = fw->fw->data + sig_off; + memcpy(&fw->sig_size, fw->fw->data + 0x18, 4); + + memcpy(&image_off, fw->fw->data + 0x1C, 4); + fw->image = fw->fw->data + image_off; + memcpy(&fw->image_sectors, fw->fw->data + 0x20, 4); + + memcpy(&custom_sig_off, fw->fw->data + 0x24, 4); + fw->custom_sig = fw->fw->data + custom_sig_off; + memcpy(&fw->custom_sig_size, fw->fw->data + 0x28, 4); + + return 0; +} + +static void s3fwrn5_fw_release_firmware(struct s3fwrn5_fw_info *fw_info) +{ + release_firmware(fw_info->fw.fw); +} + +static int s3fwrn5_fw_get_base_addr( + struct s3fwrn5_fw_cmd_get_bootinfo_rsp *bootinfo, u32 *base_addr) +{ + int i; + static const struct { + u8 version[4]; + u32 base_addr; + } match[] = { + {{0x05, 0x00, 0x00, 0x00}, 0x00005000}, + {{0x05, 0x00, 0x00, 0x01}, 0x00003000}, + {{0x05, 0x00, 0x00, 0x02}, 0x00003000}, + {{0x05, 0x00, 0x00, 0x03}, 0x00003000}, + {{0x05, 0x00, 0x00, 0x05}, 0x00003000} + }; + + for (i = 0; i < ARRAY_SIZE(match); ++i) + if (bootinfo->hw_version[0] == match[i].version[0] && + bootinfo->hw_version[1] == match[i].version[1] && + bootinfo->hw_version[3] == match[i].version[3]) { + *base_addr = match[i].base_addr; + return 0; + } + + return -EINVAL; +} + +static inline bool +s3fwrn5_fw_is_custom(const struct s3fwrn5_fw_cmd_get_bootinfo_rsp *bootinfo) +{ + return !!bootinfo->hw_version[2]; +} + +int s3fwrn5_fw_setup(struct s3fwrn5_fw_info *fw_info) +{ + struct device *dev = &fw_info->ndev->nfc_dev->dev; + struct s3fwrn5_fw_cmd_get_bootinfo_rsp bootinfo; + int ret; + + /* Get bootloader info */ + + ret = s3fwrn5_fw_get_bootinfo(fw_info, &bootinfo); + if (ret < 0) { + dev_err(dev, "Failed to get bootinfo, ret=%02x\n", ret); + goto err; + } + + /* Match hardware version to obtain firmware base address */ + + ret = s3fwrn5_fw_get_base_addr(&bootinfo, &fw_info->base_addr); + if (ret < 0) { + dev_err(dev, "Unknown hardware version\n"); + goto err; + } + + fw_info->sector_size = bootinfo.sector_size; + + fw_info->sig_size = s3fwrn5_fw_is_custom(&bootinfo) ? + fw_info->fw.custom_sig_size : fw_info->fw.sig_size; + fw_info->sig = s3fwrn5_fw_is_custom(&bootinfo) ? + fw_info->fw.custom_sig : fw_info->fw.sig; + + return 0; + +err: + s3fwrn5_fw_release_firmware(fw_info); + return ret; +} + +bool s3fwrn5_fw_check_version(const struct s3fwrn5_fw_info *fw_info, u32 version) +{ + struct s3fwrn5_fw_version *new = (void *) &fw_info->fw.version; + struct s3fwrn5_fw_version *old = (void *) &version; + + if (new->major > old->major) + return true; + if (new->build1 > old->build1) + return true; + if (new->build2 > old->build2) + return true; + + return false; +} + +int s3fwrn5_fw_download(struct s3fwrn5_fw_info *fw_info) +{ + struct device *dev = &fw_info->ndev->nfc_dev->dev; + struct s3fwrn5_fw_image *fw = &fw_info->fw; + u8 hash_data[SHA1_DIGEST_SIZE]; + struct crypto_shash *tfm; + u32 image_size, off; + int ret; + + image_size = fw_info->sector_size * fw->image_sectors; + + /* Compute SHA of firmware data */ + + tfm = crypto_alloc_shash("sha1", 0, 0); + if (IS_ERR(tfm)) { + dev_err(dev, "Cannot allocate shash (code=%pe)\n", tfm); + return PTR_ERR(tfm); + } + + ret = crypto_shash_tfm_digest(tfm, fw->image, image_size, hash_data); + + crypto_free_shash(tfm); + if (ret) { + dev_err(dev, "Cannot compute hash (code=%d)\n", ret); + return ret; + } + + /* Firmware update process */ + + dev_info(dev, "Firmware update: %s\n", fw_info->fw_name); + + ret = s3fwrn5_fw_enter_update_mode(fw_info, hash_data, + SHA1_DIGEST_SIZE, fw_info->sig, fw_info->sig_size); + if (ret < 0) { + dev_err(dev, "Unable to enter update mode\n"); + return ret; + } + + for (off = 0; off < image_size; off += fw_info->sector_size) { + ret = s3fwrn5_fw_update_sector(fw_info, + fw_info->base_addr + off, fw->image + off); + if (ret < 0) { + dev_err(dev, "Firmware update error (code=%d)\n", ret); + return ret; + } + } + + ret = s3fwrn5_fw_complete_update_mode(fw_info); + if (ret < 0) { + dev_err(dev, "Unable to complete update mode\n"); + return ret; + } + + dev_info(dev, "Firmware update: success\n"); + + return ret; +} + +void s3fwrn5_fw_init(struct s3fwrn5_fw_info *fw_info, const char *fw_name) +{ + fw_info->parity = 0x00; + fw_info->rsp = NULL; + fw_info->fw.fw = NULL; + strcpy(fw_info->fw_name, fw_name); + init_completion(&fw_info->completion); +} + +void s3fwrn5_fw_cleanup(struct s3fwrn5_fw_info *fw_info) +{ + s3fwrn5_fw_release_firmware(fw_info); +} + +int s3fwrn5_fw_recv_frame(struct nci_dev *ndev, struct sk_buff *skb) +{ + struct s3fwrn5_info *info = nci_get_drvdata(ndev); + struct s3fwrn5_fw_info *fw_info = &info->fw_info; + + if (WARN_ON(fw_info->rsp)) { + kfree_skb(skb); + return -EINVAL; + } + + fw_info->rsp = skb; + + complete(&fw_info->completion); + + return 0; +} diff --git a/drivers/nfc/s3fwrn5/firmware.h b/drivers/nfc/s3fwrn5/firmware.h new file mode 100644 index 000000000..3a82ce583 --- /dev/null +++ b/drivers/nfc/s3fwrn5/firmware.h @@ -0,0 +1,101 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * NCI based driver for Samsung S3FWRN5 NFC chip + * + * Copyright (C) 2015 Samsung Electrnoics + * Robert Baldyga <r.baldyga@samsung.com> + */ + +#ifndef __LOCAL_S3FWRN5_FIRMWARE_H_ +#define __LOCAL_S3FWRN5_FIRMWARE_H_ + +/* FW Message Types */ +#define S3FWRN5_FW_MSG_CMD 0x00 +#define S3FWRN5_FW_MSG_RSP 0x01 +#define S3FWRN5_FW_MSG_DATA 0x02 + +/* FW Return Codes */ +#define S3FWRN5_FW_RET_SUCCESS 0x00 +#define S3FWRN5_FW_RET_MESSAGE_TYPE_INVALID 0x01 +#define S3FWRN5_FW_RET_COMMAND_INVALID 0x02 +#define S3FWRN5_FW_RET_PAGE_DATA_OVERFLOW 0x03 +#define S3FWRN5_FW_RET_SECT_DATA_OVERFLOW 0x04 +#define S3FWRN5_FW_RET_AUTHENTICATION_FAIL 0x05 +#define S3FWRN5_FW_RET_FLASH_OPERATION_FAIL 0x06 +#define S3FWRN5_FW_RET_ADDRESS_OUT_OF_RANGE 0x07 +#define S3FWRN5_FW_RET_PARAMETER_INVALID 0x08 + +/* ---- FW Packet structures ---- */ +#define S3FWRN5_FW_HDR_SIZE 4 + +struct s3fwrn5_fw_header { + __u8 type; + __u8 code; + __u16 len; +}; + +#define S3FWRN5_FW_CMD_RESET 0x00 + +#define S3FWRN5_FW_CMD_GET_BOOTINFO 0x01 + +struct s3fwrn5_fw_cmd_get_bootinfo_rsp { + __u8 hw_version[4]; + __u16 sector_size; + __u16 page_size; + __u16 frame_max_size; + __u16 hw_buffer_size; +}; + +#define S3FWRN5_FW_CMD_ENTER_UPDATE_MODE 0x02 + +struct s3fwrn5_fw_cmd_enter_updatemode { + __u16 hashcode_size; + __u16 signature_size; +}; + +#define S3FWRN5_FW_CMD_UPDATE_SECTOR 0x04 + +struct s3fwrn5_fw_cmd_update_sector { + __u32 base_address; +}; + +#define S3FWRN5_FW_CMD_COMPLETE_UPDATE_MODE 0x05 + +struct s3fwrn5_fw_image { + const struct firmware *fw; + + char date[13]; + u32 version; + const void *sig; + u32 sig_size; + const void *image; + u32 image_sectors; + const void *custom_sig; + u32 custom_sig_size; +}; + +struct s3fwrn5_fw_info { + struct nci_dev *ndev; + struct s3fwrn5_fw_image fw; + char fw_name[NFC_FIRMWARE_NAME_MAXSIZE + 1]; + + const void *sig; + u32 sig_size; + u32 sector_size; + u32 base_addr; + + struct completion completion; + struct sk_buff *rsp; + char parity; +}; + +int s3fwrn5_fw_request_firmware(struct s3fwrn5_fw_info *fw_info); +void s3fwrn5_fw_init(struct s3fwrn5_fw_info *fw_info, const char *fw_name); +int s3fwrn5_fw_setup(struct s3fwrn5_fw_info *fw_info); +bool s3fwrn5_fw_check_version(const struct s3fwrn5_fw_info *fw_info, u32 version); +int s3fwrn5_fw_download(struct s3fwrn5_fw_info *fw_info); +void s3fwrn5_fw_cleanup(struct s3fwrn5_fw_info *fw_info); + +int s3fwrn5_fw_recv_frame(struct nci_dev *ndev, struct sk_buff *skb); + +#endif /* __LOCAL_S3FWRN5_FIRMWARE_H_ */ diff --git a/drivers/nfc/s3fwrn5/i2c.c b/drivers/nfc/s3fwrn5/i2c.c new file mode 100644 index 000000000..f824dc709 --- /dev/null +++ b/drivers/nfc/s3fwrn5/i2c.c @@ -0,0 +1,283 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * I2C Link Layer for Samsung S3FWRN5 NCI based Driver + * + * Copyright (C) 2015 Samsung Electrnoics + * Robert Baldyga <r.baldyga@samsung.com> + */ + +#include <linux/clk.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/of_gpio.h> +#include <linux/of_irq.h> +#include <linux/module.h> + +#include <net/nfc/nfc.h> + +#include "phy_common.h" + +#define S3FWRN5_I2C_DRIVER_NAME "s3fwrn5_i2c" + +struct s3fwrn5_i2c_phy { + struct phy_common common; + struct i2c_client *i2c_dev; + struct clk *clk; + + unsigned int irq_skip:1; +}; + +static void s3fwrn5_i2c_set_mode(void *phy_id, enum s3fwrn5_mode mode) +{ + struct s3fwrn5_i2c_phy *phy = phy_id; + + mutex_lock(&phy->common.mutex); + + if (s3fwrn5_phy_power_ctrl(&phy->common, mode) == false) + goto out; + + phy->irq_skip = true; + +out: + mutex_unlock(&phy->common.mutex); +} + +static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb) +{ + struct s3fwrn5_i2c_phy *phy = phy_id; + int ret; + + mutex_lock(&phy->common.mutex); + + phy->irq_skip = false; + + ret = i2c_master_send(phy->i2c_dev, skb->data, skb->len); + if (ret == -EREMOTEIO) { + /* Retry, chip was in standby */ + usleep_range(110000, 120000); + ret = i2c_master_send(phy->i2c_dev, skb->data, skb->len); + } + + mutex_unlock(&phy->common.mutex); + + if (ret < 0) + return ret; + + if (ret != skb->len) + return -EREMOTEIO; + + return 0; +} + +static const struct s3fwrn5_phy_ops i2c_phy_ops = { + .set_wake = s3fwrn5_phy_set_wake, + .set_mode = s3fwrn5_i2c_set_mode, + .get_mode = s3fwrn5_phy_get_mode, + .write = s3fwrn5_i2c_write, +}; + +static int s3fwrn5_i2c_read(struct s3fwrn5_i2c_phy *phy) +{ + struct sk_buff *skb; + size_t hdr_size; + size_t data_len; + char hdr[4]; + int ret; + + hdr_size = (phy->common.mode == S3FWRN5_MODE_NCI) ? + NCI_CTRL_HDR_SIZE : S3FWRN5_FW_HDR_SIZE; + ret = i2c_master_recv(phy->i2c_dev, hdr, hdr_size); + if (ret < 0) + return ret; + + if (ret < hdr_size) + return -EBADMSG; + + data_len = (phy->common.mode == S3FWRN5_MODE_NCI) ? + ((struct nci_ctrl_hdr *)hdr)->plen : + ((struct s3fwrn5_fw_header *)hdr)->len; + + skb = alloc_skb(hdr_size + data_len, GFP_KERNEL); + if (!skb) + return -ENOMEM; + + skb_put_data(skb, hdr, hdr_size); + + if (data_len == 0) + goto out; + + ret = i2c_master_recv(phy->i2c_dev, skb_put(skb, data_len), data_len); + if (ret != data_len) { + kfree_skb(skb); + return -EBADMSG; + } + +out: + return s3fwrn5_recv_frame(phy->common.ndev, skb, phy->common.mode); +} + +static irqreturn_t s3fwrn5_i2c_irq_thread_fn(int irq, void *phy_id) +{ + struct s3fwrn5_i2c_phy *phy = phy_id; + + if (!phy || !phy->common.ndev) { + WARN_ON_ONCE(1); + return IRQ_NONE; + } + + mutex_lock(&phy->common.mutex); + + if (phy->irq_skip) + goto out; + + switch (phy->common.mode) { + case S3FWRN5_MODE_NCI: + case S3FWRN5_MODE_FW: + s3fwrn5_i2c_read(phy); + break; + case S3FWRN5_MODE_COLD: + break; + } + +out: + mutex_unlock(&phy->common.mutex); + + return IRQ_HANDLED; +} + +static int s3fwrn5_i2c_parse_dt(struct i2c_client *client) +{ + struct s3fwrn5_i2c_phy *phy = i2c_get_clientdata(client); + struct device_node *np = client->dev.of_node; + + if (!np) + return -ENODEV; + + phy->common.gpio_en = of_get_named_gpio(np, "en-gpios", 0); + if (!gpio_is_valid(phy->common.gpio_en)) { + /* Support also deprecated property */ + phy->common.gpio_en = of_get_named_gpio(np, + "s3fwrn5,en-gpios", + 0); + if (!gpio_is_valid(phy->common.gpio_en)) + return -ENODEV; + } + + phy->common.gpio_fw_wake = of_get_named_gpio(np, "wake-gpios", 0); + if (!gpio_is_valid(phy->common.gpio_fw_wake)) { + /* Support also deprecated property */ + phy->common.gpio_fw_wake = of_get_named_gpio(np, + "s3fwrn5,fw-gpios", + 0); + if (!gpio_is_valid(phy->common.gpio_fw_wake)) + return -ENODEV; + } + + return 0; +} + +static int s3fwrn5_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct s3fwrn5_i2c_phy *phy; + int ret; + + phy = devm_kzalloc(&client->dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + mutex_init(&phy->common.mutex); + phy->common.mode = S3FWRN5_MODE_COLD; + phy->irq_skip = true; + + phy->i2c_dev = client; + i2c_set_clientdata(client, phy); + + ret = s3fwrn5_i2c_parse_dt(client); + if (ret < 0) + return ret; + + ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->common.gpio_en, + GPIOF_OUT_INIT_HIGH, "s3fwrn5_en"); + if (ret < 0) + return ret; + + ret = devm_gpio_request_one(&phy->i2c_dev->dev, + phy->common.gpio_fw_wake, + GPIOF_OUT_INIT_LOW, "s3fwrn5_fw_wake"); + if (ret < 0) + return ret; + + phy->clk = devm_clk_get_optional(&client->dev, NULL); + if (IS_ERR(phy->clk)) + return dev_err_probe(&client->dev, PTR_ERR(phy->clk), + "failed to get clock\n"); + + /* + * S3FWRN5 depends on a clock input ("XI" pin) to function properly. + * Depending on the hardware configuration this could be an always-on + * oscillator or some external clock that must be explicitly enabled. + * Make sure the clock is running before starting S3FWRN5. + */ + ret = clk_prepare_enable(phy->clk); + if (ret < 0) { + dev_err(&client->dev, "failed to enable clock: %d\n", ret); + return ret; + } + + ret = s3fwrn5_probe(&phy->common.ndev, phy, &phy->i2c_dev->dev, + &i2c_phy_ops); + if (ret < 0) + goto disable_clk; + + ret = devm_request_threaded_irq(&client->dev, phy->i2c_dev->irq, NULL, + s3fwrn5_i2c_irq_thread_fn, IRQF_ONESHOT, + S3FWRN5_I2C_DRIVER_NAME, phy); + if (ret) + goto s3fwrn5_remove; + + return 0; + +s3fwrn5_remove: + s3fwrn5_remove(phy->common.ndev); +disable_clk: + clk_disable_unprepare(phy->clk); + return ret; +} + +static void s3fwrn5_i2c_remove(struct i2c_client *client) +{ + struct s3fwrn5_i2c_phy *phy = i2c_get_clientdata(client); + + s3fwrn5_remove(phy->common.ndev); + clk_disable_unprepare(phy->clk); +} + +static const struct i2c_device_id s3fwrn5_i2c_id_table[] = { + {S3FWRN5_I2C_DRIVER_NAME, 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, s3fwrn5_i2c_id_table); + +static const struct of_device_id of_s3fwrn5_i2c_match[] __maybe_unused = { + { .compatible = "samsung,s3fwrn5-i2c", }, + {} +}; +MODULE_DEVICE_TABLE(of, of_s3fwrn5_i2c_match); + +static struct i2c_driver s3fwrn5_i2c_driver = { + .driver = { + .name = S3FWRN5_I2C_DRIVER_NAME, + .of_match_table = of_match_ptr(of_s3fwrn5_i2c_match), + }, + .probe = s3fwrn5_i2c_probe, + .remove = s3fwrn5_i2c_remove, + .id_table = s3fwrn5_i2c_id_table, +}; + +module_i2c_driver(s3fwrn5_i2c_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("I2C driver for Samsung S3FWRN5"); +MODULE_AUTHOR("Robert Baldyga <r.baldyga@samsung.com>"); diff --git a/drivers/nfc/s3fwrn5/nci.c b/drivers/nfc/s3fwrn5/nci.c new file mode 100644 index 000000000..ca6828f55 --- /dev/null +++ b/drivers/nfc/s3fwrn5/nci.c @@ -0,0 +1,119 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * NCI based driver for Samsung S3FWRN5 NFC chip + * + * Copyright (C) 2015 Samsung Electrnoics + * Robert Baldyga <r.baldyga@samsung.com> + */ + +#include <linux/completion.h> +#include <linux/firmware.h> + +#include "s3fwrn5.h" +#include "nci.h" + +static int s3fwrn5_nci_prop_rsp(struct nci_dev *ndev, struct sk_buff *skb) +{ + __u8 status = skb->data[0]; + + nci_req_complete(ndev, status); + return 0; +} + +const struct nci_driver_ops s3fwrn5_nci_prop_ops[4] = { + { + .opcode = nci_opcode_pack(NCI_GID_PROPRIETARY, + NCI_PROP_SET_RFREG), + .rsp = s3fwrn5_nci_prop_rsp, + }, + { + .opcode = nci_opcode_pack(NCI_GID_PROPRIETARY, + NCI_PROP_START_RFREG), + .rsp = s3fwrn5_nci_prop_rsp, + }, + { + .opcode = nci_opcode_pack(NCI_GID_PROPRIETARY, + NCI_PROP_STOP_RFREG), + .rsp = s3fwrn5_nci_prop_rsp, + }, + { + .opcode = nci_opcode_pack(NCI_GID_PROPRIETARY, + NCI_PROP_FW_CFG), + .rsp = s3fwrn5_nci_prop_rsp, + }, +}; + +#define S3FWRN5_RFREG_SECTION_SIZE 252 + +int s3fwrn5_nci_rf_configure(struct s3fwrn5_info *info, const char *fw_name) +{ + struct device *dev = &info->ndev->nfc_dev->dev; + const struct firmware *fw; + struct nci_prop_fw_cfg_cmd fw_cfg; + struct nci_prop_set_rfreg_cmd set_rfreg; + struct nci_prop_stop_rfreg_cmd stop_rfreg; + u32 checksum; + int i, len; + int ret; + + ret = request_firmware(&fw, fw_name, dev); + if (ret < 0) + return ret; + + /* Compute rfreg checksum */ + + checksum = 0; + for (i = 0; i < fw->size; i += 4) + checksum += *((u32 *)(fw->data+i)); + + /* Set default clock configuration for external crystal */ + + fw_cfg.clk_type = 0x01; + fw_cfg.clk_speed = 0xff; + fw_cfg.clk_req = 0xff; + ret = nci_prop_cmd(info->ndev, NCI_PROP_FW_CFG, + sizeof(fw_cfg), (__u8 *)&fw_cfg); + if (ret < 0) + goto out; + + /* Start rfreg configuration */ + + dev_info(dev, "rfreg configuration update: %s\n", fw_name); + + ret = nci_prop_cmd(info->ndev, NCI_PROP_START_RFREG, 0, NULL); + if (ret < 0) { + dev_err(dev, "Unable to start rfreg update\n"); + goto out; + } + + /* Update rfreg */ + + set_rfreg.index = 0; + for (i = 0; i < fw->size; i += S3FWRN5_RFREG_SECTION_SIZE) { + len = (fw->size - i < S3FWRN5_RFREG_SECTION_SIZE) ? + (fw->size - i) : S3FWRN5_RFREG_SECTION_SIZE; + memcpy(set_rfreg.data, fw->data+i, len); + ret = nci_prop_cmd(info->ndev, NCI_PROP_SET_RFREG, + len+1, (__u8 *)&set_rfreg); + if (ret < 0) { + dev_err(dev, "rfreg update error (code=%d)\n", ret); + goto out; + } + set_rfreg.index++; + } + + /* Finish rfreg configuration */ + + stop_rfreg.checksum = checksum & 0xffff; + ret = nci_prop_cmd(info->ndev, NCI_PROP_STOP_RFREG, + sizeof(stop_rfreg), (__u8 *)&stop_rfreg); + if (ret < 0) { + dev_err(dev, "Unable to stop rfreg update\n"); + goto out; + } + + dev_info(dev, "rfreg configuration update: success\n"); +out: + release_firmware(fw); + return ret; +} diff --git a/drivers/nfc/s3fwrn5/nci.h b/drivers/nfc/s3fwrn5/nci.h new file mode 100644 index 000000000..c2d906591 --- /dev/null +++ b/drivers/nfc/s3fwrn5/nci.h @@ -0,0 +1,56 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * NCI based driver for Samsung S3FWRN5 NFC chip + * + * Copyright (C) 2015 Samsung Electrnoics + * Robert Baldyga <r.baldyga@samsung.com> + */ + +#ifndef __LOCAL_S3FWRN5_NCI_H_ +#define __LOCAL_S3FWRN5_NCI_H_ + +#include "s3fwrn5.h" + +#define NCI_PROP_SET_RFREG 0x22 + +struct nci_prop_set_rfreg_cmd { + __u8 index; + __u8 data[252]; +}; + +struct nci_prop_set_rfreg_rsp { + __u8 status; +}; + +#define NCI_PROP_START_RFREG 0x26 + +struct nci_prop_start_rfreg_rsp { + __u8 status; +}; + +#define NCI_PROP_STOP_RFREG 0x27 + +struct nci_prop_stop_rfreg_cmd { + __u16 checksum; +}; + +struct nci_prop_stop_rfreg_rsp { + __u8 status; +}; + +#define NCI_PROP_FW_CFG 0x28 + +struct nci_prop_fw_cfg_cmd { + __u8 clk_type; + __u8 clk_speed; + __u8 clk_req; +}; + +struct nci_prop_fw_cfg_rsp { + __u8 status; +}; + +extern const struct nci_driver_ops s3fwrn5_nci_prop_ops[4]; +int s3fwrn5_nci_rf_configure(struct s3fwrn5_info *info, const char *fw_name); + +#endif /* __LOCAL_S3FWRN5_NCI_H_ */ diff --git a/drivers/nfc/s3fwrn5/phy_common.c b/drivers/nfc/s3fwrn5/phy_common.c new file mode 100644 index 000000000..81318478d --- /dev/null +++ b/drivers/nfc/s3fwrn5/phy_common.c @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Link Layer for Samsung S3FWRN5 NCI based Driver + * + * Copyright (C) 2015 Samsung Electrnoics + * Robert Baldyga <r.baldyga@samsung.com> + * Copyright (C) 2020 Samsung Electrnoics + * Bongsu Jeon <bongsu.jeon@samsung.com> + */ + +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/module.h> + +#include "phy_common.h" + +void s3fwrn5_phy_set_wake(void *phy_id, bool wake) +{ + struct phy_common *phy = phy_id; + + mutex_lock(&phy->mutex); + gpio_set_value(phy->gpio_fw_wake, wake); + if (wake) + msleep(S3FWRN5_EN_WAIT_TIME); + mutex_unlock(&phy->mutex); +} +EXPORT_SYMBOL(s3fwrn5_phy_set_wake); + +bool s3fwrn5_phy_power_ctrl(struct phy_common *phy, enum s3fwrn5_mode mode) +{ + if (phy->mode == mode) + return false; + + phy->mode = mode; + + gpio_set_value(phy->gpio_en, 1); + gpio_set_value(phy->gpio_fw_wake, 0); + if (mode == S3FWRN5_MODE_FW) + gpio_set_value(phy->gpio_fw_wake, 1); + + if (mode != S3FWRN5_MODE_COLD) { + msleep(S3FWRN5_EN_WAIT_TIME); + gpio_set_value(phy->gpio_en, 0); + msleep(S3FWRN5_EN_WAIT_TIME); + } + + return true; +} +EXPORT_SYMBOL(s3fwrn5_phy_power_ctrl); + +void s3fwrn5_phy_set_mode(void *phy_id, enum s3fwrn5_mode mode) +{ + struct phy_common *phy = phy_id; + + mutex_lock(&phy->mutex); + + s3fwrn5_phy_power_ctrl(phy, mode); + + mutex_unlock(&phy->mutex); +} +EXPORT_SYMBOL(s3fwrn5_phy_set_mode); + +enum s3fwrn5_mode s3fwrn5_phy_get_mode(void *phy_id) +{ + struct phy_common *phy = phy_id; + enum s3fwrn5_mode mode; + + mutex_lock(&phy->mutex); + + mode = phy->mode; + + mutex_unlock(&phy->mutex); + + return mode; +} +EXPORT_SYMBOL(s3fwrn5_phy_get_mode); diff --git a/drivers/nfc/s3fwrn5/phy_common.h b/drivers/nfc/s3fwrn5/phy_common.h new file mode 100644 index 000000000..99749c929 --- /dev/null +++ b/drivers/nfc/s3fwrn5/phy_common.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later + * + * Link Layer for Samsung S3FWRN5 NCI based Driver + * + * Copyright (C) 2015 Samsung Electrnoics + * Robert Baldyga <r.baldyga@samsung.com> + * Copyright (C) 2020 Samsung Electrnoics + * Bongsu Jeon <bongsu.jeon@samsung.com> + */ + +#ifndef __NFC_S3FWRN5_PHY_COMMON_H +#define __NFC_S3FWRN5_PHY_COMMON_H + +#include <linux/mutex.h> +#include <net/nfc/nci_core.h> + +#include "s3fwrn5.h" + +#define S3FWRN5_EN_WAIT_TIME 20 + +struct phy_common { + struct nci_dev *ndev; + + int gpio_en; + int gpio_fw_wake; + + struct mutex mutex; + + enum s3fwrn5_mode mode; +}; + +void s3fwrn5_phy_set_wake(void *phy_id, bool wake); +bool s3fwrn5_phy_power_ctrl(struct phy_common *phy, enum s3fwrn5_mode mode); +void s3fwrn5_phy_set_mode(void *phy_id, enum s3fwrn5_mode mode); +enum s3fwrn5_mode s3fwrn5_phy_get_mode(void *phy_id); + +#endif /* __NFC_S3FWRN5_PHY_COMMON_H */ diff --git a/drivers/nfc/s3fwrn5/s3fwrn5.h b/drivers/nfc/s3fwrn5/s3fwrn5.h new file mode 100644 index 000000000..bb8f936d1 --- /dev/null +++ b/drivers/nfc/s3fwrn5/s3fwrn5.h @@ -0,0 +1,87 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * NCI based driver for Samsung S3FWRN5 NFC chip + * + * Copyright (C) 2015 Samsung Electrnoics + * Robert Baldyga <r.baldyga@samsung.com> + */ + +#ifndef __LOCAL_S3FWRN5_H_ +#define __LOCAL_S3FWRN5_H_ + +#include <linux/nfc.h> + +#include <net/nfc/nci_core.h> + +#include "firmware.h" + +enum s3fwrn5_mode { + S3FWRN5_MODE_COLD, + S3FWRN5_MODE_NCI, + S3FWRN5_MODE_FW, +}; + +struct s3fwrn5_phy_ops { + void (*set_wake)(void *id, bool sleep); + void (*set_mode)(void *id, enum s3fwrn5_mode); + enum s3fwrn5_mode (*get_mode)(void *id); + int (*write)(void *id, struct sk_buff *skb); +}; + +struct s3fwrn5_info { + struct nci_dev *ndev; + void *phy_id; + struct device *pdev; + + const struct s3fwrn5_phy_ops *phy_ops; + + struct s3fwrn5_fw_info fw_info; + + struct mutex mutex; +}; + +static inline int s3fwrn5_set_mode(struct s3fwrn5_info *info, + enum s3fwrn5_mode mode) +{ + if (!info->phy_ops->set_mode) + return -EOPNOTSUPP; + + info->phy_ops->set_mode(info->phy_id, mode); + + return 0; +} + +static inline enum s3fwrn5_mode s3fwrn5_get_mode(struct s3fwrn5_info *info) +{ + if (!info->phy_ops->get_mode) + return -EOPNOTSUPP; + + return info->phy_ops->get_mode(info->phy_id); +} + +static inline int s3fwrn5_set_wake(struct s3fwrn5_info *info, bool wake) +{ + if (!info->phy_ops->set_wake) + return -EOPNOTSUPP; + + info->phy_ops->set_wake(info->phy_id, wake); + + return 0; +} + +static inline int s3fwrn5_write(struct s3fwrn5_info *info, struct sk_buff *skb) +{ + if (!info->phy_ops->write) + return -EOPNOTSUPP; + + return info->phy_ops->write(info->phy_id, skb); +} + +int s3fwrn5_probe(struct nci_dev **ndev, void *phy_id, struct device *pdev, + const struct s3fwrn5_phy_ops *phy_ops); +void s3fwrn5_remove(struct nci_dev *ndev); + +int s3fwrn5_recv_frame(struct nci_dev *ndev, struct sk_buff *skb, + enum s3fwrn5_mode mode); + +#endif /* __LOCAL_S3FWRN5_H_ */ diff --git a/drivers/nfc/s3fwrn5/uart.c b/drivers/nfc/s3fwrn5/uart.c new file mode 100644 index 000000000..82ea35d74 --- /dev/null +++ b/drivers/nfc/s3fwrn5/uart.c @@ -0,0 +1,196 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * UART Link Layer for S3FWRN82 NCI based Driver + * + * Copyright (C) 2015 Samsung Electronics + * Robert Baldyga <r.baldyga@samsung.com> + * Copyright (C) 2020 Samsung Electronics + * Bongsu Jeon <bongsu.jeon@samsung.com> + */ + +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/nfc.h> +#include <linux/netdevice.h> +#include <linux/of.h> +#include <linux/serdev.h> +#include <linux/gpio.h> +#include <linux/of_gpio.h> + +#include "phy_common.h" + +#define S3FWRN82_NCI_HEADER 3 +#define S3FWRN82_NCI_IDX 2 +#define NCI_SKB_BUFF_LEN 258 + +struct s3fwrn82_uart_phy { + struct phy_common common; + struct serdev_device *ser_dev; + struct sk_buff *recv_skb; +}; + +static int s3fwrn82_uart_write(void *phy_id, struct sk_buff *out) +{ + struct s3fwrn82_uart_phy *phy = phy_id; + int err; + + err = serdev_device_write(phy->ser_dev, + out->data, out->len, + MAX_SCHEDULE_TIMEOUT); + if (err < 0) + return err; + + return 0; +} + +static const struct s3fwrn5_phy_ops uart_phy_ops = { + .set_wake = s3fwrn5_phy_set_wake, + .set_mode = s3fwrn5_phy_set_mode, + .get_mode = s3fwrn5_phy_get_mode, + .write = s3fwrn82_uart_write, +}; + +static int s3fwrn82_uart_read(struct serdev_device *serdev, + const unsigned char *data, + size_t count) +{ + struct s3fwrn82_uart_phy *phy = serdev_device_get_drvdata(serdev); + size_t i; + + for (i = 0; i < count; i++) { + skb_put_u8(phy->recv_skb, *data++); + + if (phy->recv_skb->len < S3FWRN82_NCI_HEADER) + continue; + + if ((phy->recv_skb->len - S3FWRN82_NCI_HEADER) + < phy->recv_skb->data[S3FWRN82_NCI_IDX]) + continue; + + s3fwrn5_recv_frame(phy->common.ndev, phy->recv_skb, + phy->common.mode); + phy->recv_skb = alloc_skb(NCI_SKB_BUFF_LEN, GFP_KERNEL); + if (!phy->recv_skb) + return 0; + } + + return i; +} + +static const struct serdev_device_ops s3fwrn82_serdev_ops = { + .receive_buf = s3fwrn82_uart_read, + .write_wakeup = serdev_device_write_wakeup, +}; + +static const struct of_device_id s3fwrn82_uart_of_match[] = { + { .compatible = "samsung,s3fwrn82", }, + {}, +}; +MODULE_DEVICE_TABLE(of, s3fwrn82_uart_of_match); + +static int s3fwrn82_uart_parse_dt(struct serdev_device *serdev) +{ + struct s3fwrn82_uart_phy *phy = serdev_device_get_drvdata(serdev); + struct device_node *np = serdev->dev.of_node; + + if (!np) + return -ENODEV; + + phy->common.gpio_en = of_get_named_gpio(np, "en-gpios", 0); + if (!gpio_is_valid(phy->common.gpio_en)) + return -ENODEV; + + phy->common.gpio_fw_wake = of_get_named_gpio(np, "wake-gpios", 0); + if (!gpio_is_valid(phy->common.gpio_fw_wake)) + return -ENODEV; + + return 0; +} + +static int s3fwrn82_uart_probe(struct serdev_device *serdev) +{ + struct s3fwrn82_uart_phy *phy; + int ret = -ENOMEM; + + phy = devm_kzalloc(&serdev->dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + goto err_exit; + + phy->recv_skb = alloc_skb(NCI_SKB_BUFF_LEN, GFP_KERNEL); + if (!phy->recv_skb) + goto err_exit; + + mutex_init(&phy->common.mutex); + phy->common.mode = S3FWRN5_MODE_COLD; + + phy->ser_dev = serdev; + serdev_device_set_drvdata(serdev, phy); + serdev_device_set_client_ops(serdev, &s3fwrn82_serdev_ops); + ret = serdev_device_open(serdev); + if (ret) { + dev_err(&serdev->dev, "Unable to open device\n"); + goto err_skb; + } + + ret = serdev_device_set_baudrate(serdev, 115200); + if (ret != 115200) { + ret = -EINVAL; + goto err_serdev; + } + + serdev_device_set_flow_control(serdev, false); + + ret = s3fwrn82_uart_parse_dt(serdev); + if (ret < 0) + goto err_serdev; + + ret = devm_gpio_request_one(&phy->ser_dev->dev, phy->common.gpio_en, + GPIOF_OUT_INIT_HIGH, "s3fwrn82_en"); + if (ret < 0) + goto err_serdev; + + ret = devm_gpio_request_one(&phy->ser_dev->dev, + phy->common.gpio_fw_wake, + GPIOF_OUT_INIT_LOW, "s3fwrn82_fw_wake"); + if (ret < 0) + goto err_serdev; + + ret = s3fwrn5_probe(&phy->common.ndev, phy, &phy->ser_dev->dev, + &uart_phy_ops); + if (ret < 0) + goto err_serdev; + + return ret; + +err_serdev: + serdev_device_close(serdev); +err_skb: + kfree_skb(phy->recv_skb); +err_exit: + return ret; +} + +static void s3fwrn82_uart_remove(struct serdev_device *serdev) +{ + struct s3fwrn82_uart_phy *phy = serdev_device_get_drvdata(serdev); + + s3fwrn5_remove(phy->common.ndev); + serdev_device_close(serdev); + kfree_skb(phy->recv_skb); +} + +static struct serdev_device_driver s3fwrn82_uart_driver = { + .probe = s3fwrn82_uart_probe, + .remove = s3fwrn82_uart_remove, + .driver = { + .name = "s3fwrn82_uart", + .of_match_table = s3fwrn82_uart_of_match, + }, +}; + +module_serdev_device_driver(s3fwrn82_uart_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("UART driver for Samsung NFC"); +MODULE_AUTHOR("Bongsu Jeon <bongsu.jeon@samsung.com>"); |