summaryrefslogtreecommitdiffstats
path: root/drivers/parisc/superio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/parisc/superio.c')
-rw-r--r--drivers/parisc/superio.c494
1 files changed, 494 insertions, 0 deletions
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
new file mode 100644
index 000000000..e973c6893
--- /dev/null
+++ b/drivers/parisc/superio.c
@@ -0,0 +1,494 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* National Semiconductor NS87560UBD Super I/O controller used in
+ * HP [BCJ]x000 workstations.
+ *
+ * This chip is a horrid piece of engineering, and National
+ * denies any knowledge of its existence. Thus no datasheet is
+ * available off www.national.com.
+ *
+ * (C) Copyright 2000 Linuxcare, Inc.
+ * (C) Copyright 2000 Linuxcare Canada, Inc.
+ * (C) Copyright 2000 Martin K. Petersen <mkp@linuxcare.com>
+ * (C) Copyright 2000 Alex deVries <alex@onefishtwo.ca>
+ * (C) Copyright 2001 John Marvin <jsm fc hp com>
+ * (C) Copyright 2003 Grant Grundler <grundler parisc-linux org>
+ * (C) Copyright 2005 Kyle McMartin <kyle@parisc-linux.org>
+ * (C) Copyright 2006 Helge Deller <deller@gmx.de>
+ *
+ * The initial version of this is by Martin Peterson. Alex deVries
+ * has spent a bit of time trying to coax it into working.
+ *
+ * Major changes to get basic interrupt infrastructure working to
+ * hopefully be able to support all SuperIO devices. Currently
+ * works with serial. -- John Marvin <jsm@fc.hp.com>
+ *
+ * Converted superio_init() to be a PCI_FIXUP_FINAL callee.
+ * -- Kyle McMartin <kyle@parisc-linux.org>
+ */
+
+
+/* NOTES:
+ *
+ * Function 0 is an IDE controller. It is identical to a PC87415 IDE
+ * controller (and identifies itself as such).
+ *
+ * Function 1 is a "Legacy I/O" controller. Under this function is a
+ * whole mess of legacy I/O peripherals. Of course, HP hasn't enabled
+ * all the functionality in hardware, but the following is available:
+ *
+ * Two 16550A compatible serial controllers
+ * An IEEE 1284 compatible parallel port
+ * A floppy disk controller
+ *
+ * Function 2 is a USB controller.
+ *
+ * We must be incredibly careful during initialization. Since all
+ * interrupts are routed through function 1 (which is not allowed by
+ * the PCI spec), we need to program the PICs on the legacy I/O port
+ * *before* we attempt to set up IDE and USB. @#$!&
+ *
+ * According to HP, devices are only enabled by firmware if they have
+ * a physical device connected.
+ *
+ * Configuration register bits:
+ * 0x5A: FDC, SP1, IDE1, SP2, IDE2, PAR, Reserved, P92
+ * 0x5B: RTC, 8259, 8254, DMA1, DMA2, KBC, P61, APM
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial.h>
+#include <linux/pci.h>
+#include <linux/parport.h>
+#include <linux/parport_pc.h>
+#include <linux/termios.h>
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/superio.h>
+
+static struct superio_device sio_dev;
+
+
+#undef DEBUG_SUPERIO_INIT
+
+#ifdef DEBUG_SUPERIO_INIT
+#define DBG_INIT(x...) printk(x)
+#else
+#define DBG_INIT(x...)
+#endif
+
+#define SUPERIO "SuperIO"
+#define PFX SUPERIO ": "
+
+static irqreturn_t
+superio_interrupt(int parent_irq, void *devp)
+{
+ u8 results;
+ u8 local_irq;
+
+ /* Poll the 8259 to see if there's an interrupt. */
+ outb (OCW3_POLL,IC_PIC1+0);
+
+ results = inb(IC_PIC1+0);
+
+ /*
+ * Bit 7: 1 = active Interrupt; 0 = no Interrupt pending
+ * Bits 6-3: zero
+ * Bits 2-0: highest priority, active requesting interrupt ID (0-7)
+ */
+ if ((results & 0x80) == 0) {
+ /* I suspect "spurious" interrupts are from unmasking an IRQ.
+ * We don't know if an interrupt was/is pending and thus
+ * just call the handler for that IRQ as if it were pending.
+ */
+ return IRQ_NONE;
+ }
+
+ /* Check to see which device is interrupting */
+ local_irq = results & 0x0f;
+
+ if (local_irq == 2 || local_irq > 7) {
+ printk(KERN_ERR PFX "slave interrupted!\n");
+ return IRQ_HANDLED;
+ }
+
+ if (local_irq == 7) {
+
+ /* Could be spurious. Check in service bits */
+
+ outb(OCW3_ISR,IC_PIC1+0);
+ results = inb(IC_PIC1+0);
+ if ((results & 0x80) == 0) { /* if ISR7 not set: spurious */
+ printk(KERN_WARNING PFX "spurious interrupt!\n");
+ return IRQ_HANDLED;
+ }
+ }
+
+ /* Call the appropriate device's interrupt */
+ generic_handle_irq(local_irq);
+
+ /* set EOI - forces a new interrupt if a lower priority device
+ * still needs service.
+ */
+ outb((OCW2_SEOI|local_irq),IC_PIC1 + 0);
+ return IRQ_HANDLED;
+}
+
+/* Initialize Super I/O device */
+static void
+superio_init(struct pci_dev *pcidev)
+{
+ struct superio_device *sio = &sio_dev;
+ struct pci_dev *pdev = sio->lio_pdev;
+ u16 word;
+ int ret;
+
+ if (sio->suckyio_irq_enabled)
+ return;
+
+ BUG_ON(!pdev);
+ BUG_ON(!sio->usb_pdev);
+
+ /* use the IRQ iosapic found for USB INT D... */
+ pdev->irq = sio->usb_pdev->irq;
+
+ /* ...then properly fixup the USB to point at suckyio PIC */
+ sio->usb_pdev->irq = superio_fixup_irq(sio->usb_pdev);
+
+ printk(KERN_INFO PFX "Found NS87560 Legacy I/O device at %s (IRQ %i)\n",
+ pci_name(pdev), pdev->irq);
+
+ pci_read_config_dword (pdev, SIO_SP1BAR, &sio->sp1_base);
+ sio->sp1_base &= ~1;
+ printk(KERN_INFO PFX "Serial port 1 at 0x%x\n", sio->sp1_base);
+
+ pci_read_config_dword (pdev, SIO_SP2BAR, &sio->sp2_base);
+ sio->sp2_base &= ~1;
+ printk(KERN_INFO PFX "Serial port 2 at 0x%x\n", sio->sp2_base);
+
+ pci_read_config_dword (pdev, SIO_PPBAR, &sio->pp_base);
+ sio->pp_base &= ~1;
+ printk(KERN_INFO PFX "Parallel port at 0x%x\n", sio->pp_base);
+
+ pci_read_config_dword (pdev, SIO_FDCBAR, &sio->fdc_base);
+ sio->fdc_base &= ~1;
+ printk(KERN_INFO PFX "Floppy controller at 0x%x\n", sio->fdc_base);
+ pci_read_config_dword (pdev, SIO_ACPIBAR, &sio->acpi_base);
+ sio->acpi_base &= ~1;
+ printk(KERN_INFO PFX "ACPI at 0x%x\n", sio->acpi_base);
+
+ request_region (IC_PIC1, 0x1f, "pic1");
+ request_region (IC_PIC2, 0x1f, "pic2");
+ request_region (sio->acpi_base, 0x1f, "acpi");
+
+ /* Enable the legacy I/O function */
+ pci_read_config_word (pdev, PCI_COMMAND, &word);
+ word |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_IO;
+ pci_write_config_word (pdev, PCI_COMMAND, word);
+
+ pci_set_master (pdev);
+ ret = pci_enable_device(pdev);
+ BUG_ON(ret < 0); /* not too much we can do about this... */
+
+ /*
+ * Next project is programming the onboard interrupt controllers.
+ * PDC hasn't done this for us, since it's using polled I/O.
+ *
+ * XXX Use dword writes to avoid bugs in Elroy or Suckyio Config
+ * space access. PCI is by nature a 32-bit bus and config
+ * space can be sensitive to that.
+ */
+
+ /* 0x64 - 0x67 :
+ DMA Rtg 2
+ DMA Rtg 3
+ DMA Chan Ctl
+ TRIGGER_1 == 0x82 USB & IDE level triggered, rest to edge
+ */
+ pci_write_config_dword (pdev, 0x64, 0x82000000U);
+
+ /* 0x68 - 0x6b :
+ TRIGGER_2 == 0x00 all edge triggered (not used)
+ CFG_IR_SER == 0x43 SerPort1 = IRQ3, SerPort2 = IRQ4
+ CFG_IR_PF == 0x65 ParPort = IRQ5, FloppyCtlr = IRQ6
+ CFG_IR_IDE == 0x07 IDE1 = IRQ7, reserved
+ */
+ pci_write_config_dword (pdev, TRIGGER_2, 0x07654300U);
+
+ /* 0x6c - 0x6f :
+ CFG_IR_INTAB == 0x00
+ CFG_IR_INTCD == 0x10 USB = IRQ1
+ CFG_IR_PS2 == 0x00
+ CFG_IR_FXBUS == 0x00
+ */
+ pci_write_config_dword (pdev, CFG_IR_INTAB, 0x00001000U);
+
+ /* 0x70 - 0x73 :
+ CFG_IR_USB == 0x00 not used. USB is connected to INTD.
+ CFG_IR_ACPI == 0x00 not used.
+ DMA Priority == 0x4c88 Power on default value. NFC.
+ */
+ pci_write_config_dword (pdev, CFG_IR_USB, 0x4c880000U);
+
+ /* PIC1 Initialization Command Word register programming */
+ outb (0x11,IC_PIC1+0); /* ICW1: ICW4 write req | ICW1 */
+ outb (0x00,IC_PIC1+1); /* ICW2: interrupt vector table - not used */
+ outb (0x04,IC_PIC1+1); /* ICW3: Cascade */
+ outb (0x01,IC_PIC1+1); /* ICW4: x86 mode */
+
+ /* PIC1 Program Operational Control Words */
+ outb (0xff,IC_PIC1+1); /* OCW1: Mask all interrupts */
+ outb (0xc2,IC_PIC1+0); /* OCW2: priority (3-7,0-2) */
+
+ /* PIC2 Initialization Command Word register programming */
+ outb (0x11,IC_PIC2+0); /* ICW1: ICW4 write req | ICW1 */
+ outb (0x00,IC_PIC2+1); /* ICW2: N/A */
+ outb (0x02,IC_PIC2+1); /* ICW3: Slave ID code */
+ outb (0x01,IC_PIC2+1); /* ICW4: x86 mode */
+
+ /* Program Operational Control Words */
+ outb (0xff,IC_PIC1+1); /* OCW1: Mask all interrupts */
+ outb (0x68,IC_PIC1+0); /* OCW3: OCW3 select | ESMM | SMM */
+
+ /* Write master mask reg */
+ outb (0xff,IC_PIC1+1);
+
+ /* Setup USB power regulation */
+ outb(1, sio->acpi_base + USB_REG_CR);
+ if (inb(sio->acpi_base + USB_REG_CR) & 1)
+ printk(KERN_INFO PFX "USB regulator enabled\n");
+ else
+ printk(KERN_ERR PFX "USB regulator not initialized!\n");
+
+ if (request_irq(pdev->irq, superio_interrupt, 0,
+ SUPERIO, (void *)sio)) {
+
+ printk(KERN_ERR PFX "could not get irq\n");
+ BUG();
+ return;
+ }
+
+ sio->suckyio_irq_enabled = 1;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_LIO, superio_init);
+
+static void superio_mask_irq(struct irq_data *d)
+{
+ unsigned int irq = d->irq;
+ u8 r8;
+
+ if ((irq < 1) || (irq == 2) || (irq > 7)) {
+ printk(KERN_ERR PFX "Illegal irq number.\n");
+ BUG();
+ return;
+ }
+
+ /* Mask interrupt */
+
+ r8 = inb(IC_PIC1+1);
+ r8 |= (1 << irq);
+ outb (r8,IC_PIC1+1);
+}
+
+static void superio_unmask_irq(struct irq_data *d)
+{
+ unsigned int irq = d->irq;
+ u8 r8;
+
+ if ((irq < 1) || (irq == 2) || (irq > 7)) {
+ printk(KERN_ERR PFX "Illegal irq number (%d).\n", irq);
+ BUG();
+ return;
+ }
+
+ /* Unmask interrupt */
+ r8 = inb(IC_PIC1+1);
+ r8 &= ~(1 << irq);
+ outb (r8,IC_PIC1+1);
+}
+
+static struct irq_chip superio_interrupt_type = {
+ .name = SUPERIO,
+ .irq_unmask = superio_unmask_irq,
+ .irq_mask = superio_mask_irq,
+};
+
+#ifdef DEBUG_SUPERIO_INIT
+static unsigned short expected_device[3] = {
+ PCI_DEVICE_ID_NS_87415,
+ PCI_DEVICE_ID_NS_87560_LIO,
+ PCI_DEVICE_ID_NS_87560_USB
+};
+#endif
+
+int superio_fixup_irq(struct pci_dev *pcidev)
+{
+ int local_irq, i;
+
+#ifdef DEBUG_SUPERIO_INIT
+ int fn;
+ fn = PCI_FUNC(pcidev->devfn);
+
+ /* Verify the function number matches the expected device id. */
+ if (expected_device[fn] != pcidev->device) {
+ BUG();
+ return -1;
+ }
+ printk(KERN_DEBUG "superio_fixup_irq(%s) ven 0x%x dev 0x%x from %ps\n",
+ pci_name(pcidev),
+ pcidev->vendor, pcidev->device,
+ __builtin_return_address(0));
+#endif
+
+ for (i = 0; i < 16; i++) {
+ irq_set_chip_and_handler(i, &superio_interrupt_type,
+ handle_simple_irq);
+ }
+
+ /*
+ * We don't allocate a SuperIO irq for the legacy IO function,
+ * since it is a "bridge". Instead, we will allocate irq's for
+ * each legacy device as they are initialized.
+ */
+
+ switch(pcidev->device) {
+ case PCI_DEVICE_ID_NS_87415: /* Function 0 */
+ local_irq = IDE_IRQ;
+ break;
+ case PCI_DEVICE_ID_NS_87560_LIO: /* Function 1 */
+ sio_dev.lio_pdev = pcidev; /* save for superio_init() */
+ return -1;
+ case PCI_DEVICE_ID_NS_87560_USB: /* Function 2 */
+ sio_dev.usb_pdev = pcidev; /* save for superio_init() */
+ local_irq = USB_IRQ;
+ break;
+ default:
+ local_irq = -1;
+ BUG();
+ break;
+ }
+
+ return local_irq;
+}
+
+static void __init superio_serial_init(void)
+{
+#ifdef CONFIG_SERIAL_8250
+ int retval;
+ struct uart_port serial_port;
+
+ memset(&serial_port, 0, sizeof(serial_port));
+ serial_port.iotype = UPIO_PORT;
+ serial_port.type = PORT_16550A;
+ serial_port.uartclk = 115200*16;
+ serial_port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE |
+ UPF_BOOT_AUTOCONF;
+
+ /* serial port #1 */
+ serial_port.iobase = sio_dev.sp1_base;
+ serial_port.irq = SP1_IRQ;
+ serial_port.line = 0;
+ retval = early_serial_setup(&serial_port);
+ if (retval < 0) {
+ printk(KERN_WARNING PFX "Register Serial #0 failed.\n");
+ return;
+ }
+
+ /* serial port #2 */
+ serial_port.iobase = sio_dev.sp2_base;
+ serial_port.irq = SP2_IRQ;
+ serial_port.line = 1;
+ retval = early_serial_setup(&serial_port);
+ if (retval < 0)
+ printk(KERN_WARNING PFX "Register Serial #1 failed.\n");
+#endif /* CONFIG_SERIAL_8250 */
+}
+
+
+static void __init superio_parport_init(void)
+{
+#ifdef CONFIG_PARPORT_PC
+ if (!parport_pc_probe_port(sio_dev.pp_base,
+ 0 /*base_hi*/,
+ PAR_IRQ,
+ PARPORT_DMA_NONE /* dma */,
+ NULL /*struct pci_dev* */,
+ 0 /* shared irq flags */))
+
+ printk(KERN_WARNING PFX "Probing parallel port failed.\n");
+#endif /* CONFIG_PARPORT_PC */
+}
+
+
+static void superio_fixup_pci(struct pci_dev *pdev)
+{
+ u8 prog;
+
+ pdev->class |= 0x5;
+ pci_write_config_byte(pdev, PCI_CLASS_PROG, pdev->class);
+
+ pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
+ printk("PCI: Enabled native mode for NS87415 (pif=0x%x)\n", prog);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415, superio_fixup_pci);
+
+
+static int __init
+superio_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ struct superio_device *sio = &sio_dev;
+
+ /*
+ ** superio_probe(00:0e.0) ven 0x100b dev 0x2 sv 0x0 sd 0x0 class 0x1018a
+ ** superio_probe(00:0e.1) ven 0x100b dev 0xe sv 0x0 sd 0x0 class 0x68000
+ ** superio_probe(00:0e.2) ven 0x100b dev 0x12 sv 0x0 sd 0x0 class 0xc0310
+ */
+ DBG_INIT("superio_probe(%s) ven 0x%x dev 0x%x sv 0x%x sd 0x%x class 0x%x\n",
+ pci_name(dev),
+ dev->vendor, dev->device,
+ dev->subsystem_vendor, dev->subsystem_device,
+ dev->class);
+
+ BUG_ON(!sio->suckyio_irq_enabled); /* Enabled by PCI_FIXUP_FINAL */
+
+ if (dev->device == PCI_DEVICE_ID_NS_87560_LIO) { /* Function 1 */
+ superio_parport_init();
+ superio_serial_init();
+ /* REVISIT XXX : superio_fdc_init() ? */
+ return 0;
+ } else if (dev->device == PCI_DEVICE_ID_NS_87415) { /* Function 0 */
+ DBG_INIT("superio_probe: ignoring IDE 87415\n");
+ } else if (dev->device == PCI_DEVICE_ID_NS_87560_USB) { /* Function 2 */
+ DBG_INIT("superio_probe: ignoring USB OHCI controller\n");
+ } else {
+ DBG_INIT("superio_probe: WTF? Fire Extinguisher?\n");
+ }
+
+ /* Let appropriate other driver claim this device. */
+ return -ENODEV;
+}
+
+static const struct pci_device_id superio_tbl[] __initconst = {
+ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_LIO) },
+ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_USB) },
+ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415) },
+ { 0, }
+};
+
+static struct pci_driver superio_driver __refdata = {
+ .name = SUPERIO,
+ .id_table = superio_tbl,
+ .probe = superio_probe,
+};
+
+module_pci_driver(superio_driver);
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 05:03:35 +0000