diff options
Diffstat (limited to 'drivers/phy/allwinner/phy-sun4i-usb.c')
| -rw-r--r-- | drivers/phy/allwinner/phy-sun4i-usb.c | 1078 |
1 files changed, 1078 insertions, 0 deletions
diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c new file mode 100644 index 000000000..5472db9e8 --- /dev/null +++ b/drivers/phy/allwinner/phy-sun4i-usb.c @@ -0,0 +1,1078 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Allwinner sun4i USB phy driver + * + * Copyright (C) 2014-2015 Hans de Goede <hdegoede@redhat.com> + * + * Based on code from + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * + * Modelled after: Samsung S5P/Exynos SoC series MIPI CSIS/DSIM DPHY driver + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Sylwester Nawrocki <s.nawrocki@samsung.com> + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/extcon-provider.h> +#include <linux/gpio/consumer.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <linux/phy/phy.h> +#include <linux/phy/phy-sun4i-usb.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/regulator/consumer.h> +#include <linux/reset.h> +#include <linux/spinlock.h> +#include <linux/usb/of.h> +#include <linux/workqueue.h> + +#define REG_ISCR 0x00 +#define REG_PHYCTL_A10 0x04 +#define REG_PHYBIST 0x08 +#define REG_PHYTUNE 0x0c +#define REG_PHYCTL_A33 0x10 +#define REG_PHY_OTGCTL 0x20 + +#define REG_HCI_PHY_CTL 0x10 + +#define PHYCTL_DATA BIT(7) + +#define OTGCTL_ROUTE_MUSB BIT(0) + +#define SUNXI_AHB_ICHR8_EN BIT(10) +#define SUNXI_AHB_INCR4_BURST_EN BIT(9) +#define SUNXI_AHB_INCRX_ALIGN_EN BIT(8) +#define SUNXI_ULPI_BYPASS_EN BIT(0) + +/* ISCR, Interface Status and Control bits */ +#define ISCR_ID_PULLUP_EN (1 << 17) +#define ISCR_DPDM_PULLUP_EN (1 << 16) +/* sunxi has the phy id/vbus pins not connected, so we use the force bits */ +#define ISCR_FORCE_ID_MASK (3 << 14) +#define ISCR_FORCE_ID_LOW (2 << 14) +#define ISCR_FORCE_ID_HIGH (3 << 14) +#define ISCR_FORCE_VBUS_MASK (3 << 12) +#define ISCR_FORCE_VBUS_LOW (2 << 12) +#define ISCR_FORCE_VBUS_HIGH (3 << 12) + +/* Common Control Bits for Both PHYs */ +#define PHY_PLL_BW 0x03 +#define PHY_RES45_CAL_EN 0x0c + +/* Private Control Bits for Each PHY */ +#define PHY_TX_AMPLITUDE_TUNE 0x20 +#define PHY_TX_SLEWRATE_TUNE 0x22 +#define PHY_VBUSVALID_TH_SEL 0x25 +#define PHY_PULLUP_RES_SEL 0x27 +#define PHY_OTG_FUNC_EN 0x28 +#define PHY_VBUS_DET_EN 0x29 +#define PHY_DISCON_TH_SEL 0x2a +#define PHY_SQUELCH_DETECT 0x3c + +/* A83T specific control bits for PHY0 */ +#define PHY_CTL_VBUSVLDEXT BIT(5) +#define PHY_CTL_SIDDQ BIT(3) +#define PHY_CTL_H3_SIDDQ BIT(1) + +/* A83T specific control bits for PHY2 HSIC */ +#define SUNXI_EHCI_HS_FORCE BIT(20) +#define SUNXI_HSIC_CONNECT_DET BIT(17) +#define SUNXI_HSIC_CONNECT_INT BIT(16) +#define SUNXI_HSIC BIT(1) + +#define MAX_PHYS 4 + +/* + * Note do not raise the debounce time, we must report Vusb high within 100ms + * otherwise we get Vbus errors + */ +#define DEBOUNCE_TIME msecs_to_jiffies(50) +#define POLL_TIME msecs_to_jiffies(250) + +enum sun4i_usb_phy_type { + sun4i_a10_phy, + sun6i_a31_phy, + sun8i_a33_phy, + sun8i_a83t_phy, + sun8i_h3_phy, + sun8i_r40_phy, + sun8i_v3s_phy, + sun50i_a64_phy, + sun50i_h6_phy, +}; + +struct sun4i_usb_phy_cfg { + int num_phys; + int hsic_index; + enum sun4i_usb_phy_type type; + u32 disc_thresh; + u32 hci_phy_ctl_clear; + u8 phyctl_offset; + bool dedicated_clocks; + bool phy0_dual_route; + bool needs_phy2_siddq; + int missing_phys; +}; + +struct sun4i_usb_phy_data { + void __iomem *base; + const struct sun4i_usb_phy_cfg *cfg; + enum usb_dr_mode dr_mode; + spinlock_t reg_lock; /* guard access to phyctl reg */ + struct sun4i_usb_phy { + struct phy *phy; + void __iomem *pmu; + struct regulator *vbus; + struct reset_control *reset; + struct clk *clk; + struct clk *clk2; + bool regulator_on; + int index; + } phys[MAX_PHYS]; + /* phy0 / otg related variables */ + struct extcon_dev *extcon; + bool phy0_init; + struct gpio_desc *id_det_gpio; + struct gpio_desc *vbus_det_gpio; + struct power_supply *vbus_power_supply; + struct notifier_block vbus_power_nb; + bool vbus_power_nb_registered; + bool force_session_end; + int id_det_irq; + int vbus_det_irq; + int id_det; + int vbus_det; + struct delayed_work detect; +}; + +#define to_sun4i_usb_phy_data(phy) \ + container_of((phy), struct sun4i_usb_phy_data, phys[(phy)->index]) + +static void sun4i_usb_phy0_update_iscr(struct phy *_phy, u32 clr, u32 set) +{ + struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); + struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy); + u32 iscr; + + iscr = readl(data->base + REG_ISCR); + iscr &= ~clr; + iscr |= set; + writel(iscr, data->base + REG_ISCR); +} + +static void sun4i_usb_phy0_set_id_detect(struct phy *phy, u32 val) +{ + if (val) + val = ISCR_FORCE_ID_HIGH; + else + val = ISCR_FORCE_ID_LOW; + + sun4i_usb_phy0_update_iscr(phy, ISCR_FORCE_ID_MASK, val); +} + +static void sun4i_usb_phy0_set_vbus_detect(struct phy *phy, u32 val) +{ + if (val) + val = ISCR_FORCE_VBUS_HIGH; + else + val = ISCR_FORCE_VBUS_LOW; + + sun4i_usb_phy0_update_iscr(phy, ISCR_FORCE_VBUS_MASK, val); +} + +static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data, + int len) +{ + struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy); + u32 temp, usbc_bit = BIT(phy->index * 2); + void __iomem *phyctl = phy_data->base + phy_data->cfg->phyctl_offset; + unsigned long flags; + int i; + + spin_lock_irqsave(&phy_data->reg_lock, flags); + + if (phy_data->cfg->phyctl_offset == REG_PHYCTL_A33) { + /* SoCs newer than A33 need us to set phyctl to 0 explicitly */ + writel(0, phyctl); + } + + for (i = 0; i < len; i++) { + temp = readl(phyctl); + + /* clear the address portion */ + temp &= ~(0xff << 8); + + /* set the address */ + temp |= ((addr + i) << 8); + writel(temp, phyctl); + + /* set the data bit and clear usbc bit*/ + temp = readb(phyctl); + if (data & 0x1) + temp |= PHYCTL_DATA; + else + temp &= ~PHYCTL_DATA; + temp &= ~usbc_bit; + writeb(temp, phyctl); + + /* pulse usbc_bit */ + temp = readb(phyctl); + temp |= usbc_bit; + writeb(temp, phyctl); + + temp = readb(phyctl); + temp &= ~usbc_bit; + writeb(temp, phyctl); + + data >>= 1; + } + + spin_unlock_irqrestore(&phy_data->reg_lock, flags); +} + +static void sun4i_usb_phy_passby(struct sun4i_usb_phy *phy, int enable) +{ + struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy); + u32 bits, reg_value; + + if (!phy->pmu) + return; + + bits = SUNXI_AHB_ICHR8_EN | SUNXI_AHB_INCR4_BURST_EN | + SUNXI_AHB_INCRX_ALIGN_EN | SUNXI_ULPI_BYPASS_EN; + + /* A83T USB2 is HSIC */ + if (phy_data->cfg->type == sun8i_a83t_phy && phy->index == 2) + bits |= SUNXI_EHCI_HS_FORCE | SUNXI_HSIC_CONNECT_INT | + SUNXI_HSIC; + + reg_value = readl(phy->pmu); + + if (enable) + reg_value |= bits; + else + reg_value &= ~bits; + + writel(reg_value, phy->pmu); +} + +static int sun4i_usb_phy_init(struct phy *_phy) +{ + struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); + struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy); + int ret; + u32 val; + + ret = clk_prepare_enable(phy->clk); + if (ret) + return ret; + + ret = clk_prepare_enable(phy->clk2); + if (ret) { + clk_disable_unprepare(phy->clk); + return ret; + } + + ret = reset_control_deassert(phy->reset); + if (ret) { + clk_disable_unprepare(phy->clk2); + clk_disable_unprepare(phy->clk); + return ret; + } + + /* Some PHYs on some SoCs need the help of PHY2 to work. */ + if (data->cfg->needs_phy2_siddq && phy->index != 2) { + struct sun4i_usb_phy *phy2 = &data->phys[2]; + + ret = clk_prepare_enable(phy2->clk); + if (ret) { + reset_control_assert(phy->reset); + clk_disable_unprepare(phy->clk2); + clk_disable_unprepare(phy->clk); + return ret; + } + + ret = reset_control_deassert(phy2->reset); + if (ret) { + clk_disable_unprepare(phy2->clk); + reset_control_assert(phy->reset); + clk_disable_unprepare(phy->clk2); + clk_disable_unprepare(phy->clk); + return ret; + } + + /* + * This extra clock is just needed to access the + * REG_HCI_PHY_CTL PMU register for PHY2. + */ + ret = clk_prepare_enable(phy2->clk2); + if (ret) { + reset_control_assert(phy2->reset); + clk_disable_unprepare(phy2->clk); + reset_control_assert(phy->reset); + clk_disable_unprepare(phy->clk2); + clk_disable_unprepare(phy->clk); + return ret; + } + + if (phy2->pmu && data->cfg->hci_phy_ctl_clear) { + val = readl(phy2->pmu + REG_HCI_PHY_CTL); + val &= ~data->cfg->hci_phy_ctl_clear; + writel(val, phy2->pmu + REG_HCI_PHY_CTL); + } + + clk_disable_unprepare(phy->clk2); + } + + if (phy->pmu && data->cfg->hci_phy_ctl_clear) { + val = readl(phy->pmu + REG_HCI_PHY_CTL); + val &= ~data->cfg->hci_phy_ctl_clear; + writel(val, phy->pmu + REG_HCI_PHY_CTL); + } + + if (data->cfg->type == sun8i_a83t_phy || + data->cfg->type == sun50i_h6_phy) { + if (phy->index == 0) { + val = readl(data->base + data->cfg->phyctl_offset); + val |= PHY_CTL_VBUSVLDEXT; + val &= ~PHY_CTL_SIDDQ; + writel(val, data->base + data->cfg->phyctl_offset); + } + } else { + /* Enable USB 45 Ohm resistor calibration */ + if (phy->index == 0) + sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1); + + /* Adjust PHY's magnitude and rate */ + sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5); + + /* Disconnect threshold adjustment */ + sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL, + data->cfg->disc_thresh, 2); + } + + sun4i_usb_phy_passby(phy, 1); + + if (phy->index == 0) { + data->phy0_init = true; + + /* Enable pull-ups */ + sun4i_usb_phy0_update_iscr(_phy, 0, ISCR_DPDM_PULLUP_EN); + sun4i_usb_phy0_update_iscr(_phy, 0, ISCR_ID_PULLUP_EN); + + /* Force ISCR and cable state updates */ + data->id_det = -1; + data->vbus_det = -1; + queue_delayed_work(system_wq, &data->detect, 0); + } + + return 0; +} + +static int sun4i_usb_phy_exit(struct phy *_phy) +{ + struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); + struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy); + + if (phy->index == 0) { + if (data->cfg->type == sun8i_a83t_phy || + data->cfg->type == sun50i_h6_phy) { + void __iomem *phyctl = data->base + + data->cfg->phyctl_offset; + + writel(readl(phyctl) | PHY_CTL_SIDDQ, phyctl); + } + + /* Disable pull-ups */ + sun4i_usb_phy0_update_iscr(_phy, ISCR_DPDM_PULLUP_EN, 0); + sun4i_usb_phy0_update_iscr(_phy, ISCR_ID_PULLUP_EN, 0); + data->phy0_init = false; + } + + if (data->cfg->needs_phy2_siddq && phy->index != 2) { + struct sun4i_usb_phy *phy2 = &data->phys[2]; + + clk_disable_unprepare(phy2->clk); + reset_control_assert(phy2->reset); + } + + sun4i_usb_phy_passby(phy, 0); + reset_control_assert(phy->reset); + clk_disable_unprepare(phy->clk2); + clk_disable_unprepare(phy->clk); + + return 0; +} + +static int sun4i_usb_phy0_get_id_det(struct sun4i_usb_phy_data *data) +{ + switch (data->dr_mode) { + case USB_DR_MODE_OTG: + if (data->id_det_gpio) + return gpiod_get_value_cansleep(data->id_det_gpio); + else + return 1; /* Fallback to peripheral mode */ + case USB_DR_MODE_HOST: + return 0; + case USB_DR_MODE_PERIPHERAL: + default: + return 1; + } +} + +static int sun4i_usb_phy0_get_vbus_det(struct sun4i_usb_phy_data *data) +{ + if (data->vbus_det_gpio) + return gpiod_get_value_cansleep(data->vbus_det_gpio); + + if (data->vbus_power_supply) { + union power_supply_propval val; + int r; + + r = power_supply_get_property(data->vbus_power_supply, + POWER_SUPPLY_PROP_PRESENT, &val); + if (r == 0) + return val.intval; + } + + /* Fallback: report vbus as high */ + return 1; +} + +static bool sun4i_usb_phy0_have_vbus_det(struct sun4i_usb_phy_data *data) +{ + return data->vbus_det_gpio || data->vbus_power_supply; +} + +static bool sun4i_usb_phy0_poll(struct sun4i_usb_phy_data *data) +{ + if ((data->id_det_gpio && data->id_det_irq <= 0) || + (data->vbus_det_gpio && data->vbus_det_irq <= 0)) + return true; + + /* + * The A31/A23/A33 companion pmics (AXP221/AXP223) do not + * generate vbus change interrupts when the board is driving + * vbus using the N_VBUSEN pin on the pmic, so we must poll + * when using the pmic for vbus-det _and_ we're driving vbus. + */ + if ((data->cfg->type == sun6i_a31_phy || + data->cfg->type == sun8i_a33_phy) && + data->vbus_power_supply && data->phys[0].regulator_on) + return true; + + return false; +} + +static int sun4i_usb_phy_power_on(struct phy *_phy) +{ + struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); + struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy); + int ret; + + if (!phy->vbus || phy->regulator_on) + return 0; + + /* For phy0 only turn on Vbus if we don't have an ext. Vbus */ + if (phy->index == 0 && sun4i_usb_phy0_have_vbus_det(data) && + data->vbus_det) { + dev_warn(&_phy->dev, "External vbus detected, not enabling our own vbus\n"); + return 0; + } + + ret = regulator_enable(phy->vbus); + if (ret) + return ret; + + phy->regulator_on = true; + + /* We must report Vbus high within OTG_TIME_A_WAIT_VRISE msec. */ + if (phy->index == 0 && sun4i_usb_phy0_poll(data)) + mod_delayed_work(system_wq, &data->detect, DEBOUNCE_TIME); + + return 0; +} + +static int sun4i_usb_phy_power_off(struct phy *_phy) +{ + struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); + struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy); + + if (!phy->vbus || !phy->regulator_on) + return 0; + + regulator_disable(phy->vbus); + phy->regulator_on = false; + + /* + * phy0 vbus typically slowly discharges, sometimes this causes the + * Vbus gpio to not trigger an edge irq on Vbus off, so force a rescan. + */ + if (phy->index == 0 && !sun4i_usb_phy0_poll(data)) + mod_delayed_work(system_wq, &data->detect, POLL_TIME); + + return 0; +} + +static int sun4i_usb_phy_set_mode(struct phy *_phy, + enum phy_mode mode, int submode) +{ + struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); + struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy); + int new_mode; + + if (phy->index != 0) { + if (mode == PHY_MODE_USB_HOST) + return 0; + return -EINVAL; + } + + switch (mode) { + case PHY_MODE_USB_HOST: + new_mode = USB_DR_MODE_HOST; + break; + case PHY_MODE_USB_DEVICE: + new_mode = USB_DR_MODE_PERIPHERAL; + break; + case PHY_MODE_USB_OTG: + new_mode = USB_DR_MODE_OTG; + break; + default: + return -EINVAL; + } + + if (new_mode != data->dr_mode) { + dev_info(&_phy->dev, "Changing dr_mode to %d\n", new_mode); + data->dr_mode = new_mode; + } + + data->id_det = -1; /* Force reprocessing of id */ + data->force_session_end = true; + queue_delayed_work(system_wq, &data->detect, 0); + + return 0; +} + +void sun4i_usb_phy_set_squelch_detect(struct phy *_phy, bool enabled) +{ + struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); + + sun4i_usb_phy_write(phy, PHY_SQUELCH_DETECT, enabled ? 0 : 2, 2); +} +EXPORT_SYMBOL_GPL(sun4i_usb_phy_set_squelch_detect); + +static const struct phy_ops sun4i_usb_phy_ops = { + .init = sun4i_usb_phy_init, + .exit = sun4i_usb_phy_exit, + .power_on = sun4i_usb_phy_power_on, + .power_off = sun4i_usb_phy_power_off, + .set_mode = sun4i_usb_phy_set_mode, + .owner = THIS_MODULE, +}; + +static void sun4i_usb_phy0_reroute(struct sun4i_usb_phy_data *data, int id_det) +{ + u32 regval; + + regval = readl(data->base + REG_PHY_OTGCTL); + if (id_det == 0) { + /* Host mode. Route phy0 to EHCI/OHCI */ + regval &= ~OTGCTL_ROUTE_MUSB; + } else { + /* Peripheral mode. Route phy0 to MUSB */ + regval |= OTGCTL_ROUTE_MUSB; + } + writel(regval, data->base + REG_PHY_OTGCTL); +} + +static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work) +{ + struct sun4i_usb_phy_data *data = + container_of(work, struct sun4i_usb_phy_data, detect.work); + struct phy *phy0 = data->phys[0].phy; + struct sun4i_usb_phy *phy; + bool force_session_end, id_notify = false, vbus_notify = false; + int id_det, vbus_det; + + if (!phy0) + return; + + phy = phy_get_drvdata(phy0); + id_det = sun4i_usb_phy0_get_id_det(data); + vbus_det = sun4i_usb_phy0_get_vbus_det(data); + + mutex_lock(&phy0->mutex); + + if (!data->phy0_init) { + mutex_unlock(&phy0->mutex); + return; + } + + force_session_end = data->force_session_end; + data->force_session_end = false; + + if (id_det != data->id_det) { + /* id-change, force session end if we've no vbus detection */ + if (data->dr_mode == USB_DR_MODE_OTG && + !sun4i_usb_phy0_have_vbus_det(data)) + force_session_end = true; + + /* When entering host mode (id = 0) force end the session now */ + if (force_session_end && id_det == 0) { + sun4i_usb_phy0_set_vbus_detect(phy0, 0); + msleep(200); + sun4i_usb_phy0_set_vbus_detect(phy0, 1); + } + sun4i_usb_phy0_set_id_detect(phy0, id_det); + data->id_det = id_det; + id_notify = true; + } + + if (vbus_det != data->vbus_det) { + sun4i_usb_phy0_set_vbus_detect(phy0, vbus_det); + data->vbus_det = vbus_det; + vbus_notify = true; + } + + mutex_unlock(&phy0->mutex); + + if (id_notify) { + extcon_set_state_sync(data->extcon, EXTCON_USB_HOST, + !id_det); + /* When leaving host mode force end the session here */ + if (force_session_end && id_det == 1) { + mutex_lock(&phy0->mutex); + sun4i_usb_phy0_set_vbus_detect(phy0, 0); + msleep(1000); + sun4i_usb_phy0_set_vbus_detect(phy0, 1); + mutex_unlock(&phy0->mutex); + } + + /* Enable PHY0 passby for host mode only. */ + sun4i_usb_phy_passby(phy, !id_det); + + /* Re-route PHY0 if necessary */ + if (data->cfg->phy0_dual_route) + sun4i_usb_phy0_reroute(data, id_det); + } + + if (vbus_notify) + extcon_set_state_sync(data->extcon, EXTCON_USB, vbus_det); + + if (sun4i_usb_phy0_poll(data)) + queue_delayed_work(system_wq, &data->detect, POLL_TIME); +} + +static irqreturn_t sun4i_usb_phy0_id_vbus_det_irq(int irq, void *dev_id) +{ + struct sun4i_usb_phy_data *data = dev_id; + + /* vbus or id changed, let the pins settle and then scan them */ + mod_delayed_work(system_wq, &data->detect, DEBOUNCE_TIME); + + return IRQ_HANDLED; +} + +static int sun4i_usb_phy0_vbus_notify(struct notifier_block *nb, + unsigned long val, void *v) +{ + struct sun4i_usb_phy_data *data = + container_of(nb, struct sun4i_usb_phy_data, vbus_power_nb); + struct power_supply *psy = v; + + /* Properties on the vbus_power_supply changed, scan vbus_det */ + if (val == PSY_EVENT_PROP_CHANGED && psy == data->vbus_power_supply) + mod_delayed_work(system_wq, &data->detect, DEBOUNCE_TIME); + + return NOTIFY_OK; +} + +static struct phy *sun4i_usb_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct sun4i_usb_phy_data *data = dev_get_drvdata(dev); + + if (args->args[0] >= data->cfg->num_phys) + return ERR_PTR(-ENODEV); + + if (data->cfg->missing_phys & BIT(args->args[0])) + return ERR_PTR(-ENODEV); + + return data->phys[args->args[0]].phy; +} + +static int sun4i_usb_phy_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct sun4i_usb_phy_data *data = dev_get_drvdata(dev); + + if (data->vbus_power_nb_registered) + power_supply_unreg_notifier(&data->vbus_power_nb); + if (data->id_det_irq > 0) + devm_free_irq(dev, data->id_det_irq, data); + if (data->vbus_det_irq > 0) + devm_free_irq(dev, data->vbus_det_irq, data); + + cancel_delayed_work_sync(&data->detect); + + return 0; +} + +static const unsigned int sun4i_usb_phy0_cable[] = { + EXTCON_USB, + EXTCON_USB_HOST, + EXTCON_NONE, +}; + +static int sun4i_usb_phy_probe(struct platform_device *pdev) +{ + struct sun4i_usb_phy_data *data; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct phy_provider *phy_provider; + int i, ret; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + spin_lock_init(&data->reg_lock); + INIT_DELAYED_WORK(&data->detect, sun4i_usb_phy0_id_vbus_det_scan); + dev_set_drvdata(dev, data); + data->cfg = of_device_get_match_data(dev); + if (!data->cfg) + return -EINVAL; + + data->base = devm_platform_ioremap_resource_byname(pdev, "phy_ctrl"); + if (IS_ERR(data->base)) + return PTR_ERR(data->base); + + data->id_det_gpio = devm_gpiod_get_optional(dev, "usb0_id_det", + GPIOD_IN); + if (IS_ERR(data->id_det_gpio)) { + dev_err(dev, "Couldn't request ID GPIO\n"); + return PTR_ERR(data->id_det_gpio); + } + + data->vbus_det_gpio = devm_gpiod_get_optional(dev, "usb0_vbus_det", + GPIOD_IN); + if (IS_ERR(data->vbus_det_gpio)) { + dev_err(dev, "Couldn't request VBUS detect GPIO\n"); + return PTR_ERR(data->vbus_det_gpio); + } + + if (of_find_property(np, "usb0_vbus_power-supply", NULL)) { + data->vbus_power_supply = devm_power_supply_get_by_phandle(dev, + "usb0_vbus_power-supply"); + if (IS_ERR(data->vbus_power_supply)) { + dev_err(dev, "Couldn't get the VBUS power supply\n"); + return PTR_ERR(data->vbus_power_supply); + } + + if (!data->vbus_power_supply) + return -EPROBE_DEFER; + } + + data->dr_mode = of_usb_get_dr_mode_by_phy(np, 0); + + data->extcon = devm_extcon_dev_allocate(dev, sun4i_usb_phy0_cable); + if (IS_ERR(data->extcon)) { + dev_err(dev, "Couldn't allocate our extcon device\n"); + return PTR_ERR(data->extcon); + } + + ret = devm_extcon_dev_register(dev, data->extcon); + if (ret) { + dev_err(dev, "failed to register extcon: %d\n", ret); + return ret; + } + + for (i = 0; i < data->cfg->num_phys; i++) { + struct sun4i_usb_phy *phy = data->phys + i; + char name[16]; + + if (data->cfg->missing_phys & BIT(i)) + continue; + + snprintf(name, sizeof(name), "usb%d_vbus", i); + phy->vbus = devm_regulator_get_optional(dev, name); + if (IS_ERR(phy->vbus)) { + if (PTR_ERR(phy->vbus) == -EPROBE_DEFER) { + dev_err(dev, + "Couldn't get regulator %s... Deferring probe\n", + name); + return -EPROBE_DEFER; + } + + phy->vbus = NULL; + } + + if (data->cfg->dedicated_clocks) + snprintf(name, sizeof(name), "usb%d_phy", i); + else + strscpy(name, "usb_phy", sizeof(name)); + + phy->clk = devm_clk_get(dev, name); + if (IS_ERR(phy->clk)) { + dev_err(dev, "failed to get clock %s\n", name); + return PTR_ERR(phy->clk); + } + + /* The first PHY is always tied to OTG, and never HSIC */ + if (data->cfg->hsic_index && i == data->cfg->hsic_index) { + /* HSIC needs secondary clock */ + snprintf(name, sizeof(name), "usb%d_hsic_12M", i); + phy->clk2 = devm_clk_get(dev, name); + if (IS_ERR(phy->clk2)) { + dev_err(dev, "failed to get clock %s\n", name); + return PTR_ERR(phy->clk2); + } + } else { + snprintf(name, sizeof(name), "pmu%d_clk", i); + phy->clk2 = devm_clk_get_optional(dev, name); + if (IS_ERR(phy->clk2)) { + dev_err(dev, "failed to get clock %s\n", name); + return PTR_ERR(phy->clk2); + } + } + + snprintf(name, sizeof(name), "usb%d_reset", i); + phy->reset = devm_reset_control_get(dev, name); + if (IS_ERR(phy->reset)) { + dev_err(dev, "failed to get reset %s\n", name); + return PTR_ERR(phy->reset); + } + + if (i || data->cfg->phy0_dual_route) { /* No pmu for musb */ + snprintf(name, sizeof(name), "pmu%d", i); + phy->pmu = devm_platform_ioremap_resource_byname(pdev, name); + if (IS_ERR(phy->pmu)) + return PTR_ERR(phy->pmu); + } + + phy->phy = devm_phy_create(dev, NULL, &sun4i_usb_phy_ops); + if (IS_ERR(phy->phy)) { + dev_err(dev, "failed to create PHY %d\n", i); + return PTR_ERR(phy->phy); + } + + phy->index = i; + phy_set_drvdata(phy->phy, &data->phys[i]); + } + + data->id_det_irq = gpiod_to_irq(data->id_det_gpio); + if (data->id_det_irq > 0) { + ret = devm_request_irq(dev, data->id_det_irq, + sun4i_usb_phy0_id_vbus_det_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "usb0-id-det", data); + if (ret) { + dev_err(dev, "Err requesting id-det-irq: %d\n", ret); + return ret; + } + } + + data->vbus_det_irq = gpiod_to_irq(data->vbus_det_gpio); + if (data->vbus_det_irq > 0) { + ret = devm_request_irq(dev, data->vbus_det_irq, + sun4i_usb_phy0_id_vbus_det_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "usb0-vbus-det", data); + if (ret) { + dev_err(dev, "Err requesting vbus-det-irq: %d\n", ret); + data->vbus_det_irq = -1; + sun4i_usb_phy_remove(pdev); /* Stop detect work */ + return ret; + } + } + + if (data->vbus_power_supply) { + data->vbus_power_nb.notifier_call = sun4i_usb_phy0_vbus_notify; + data->vbus_power_nb.priority = 0; + ret = power_supply_reg_notifier(&data->vbus_power_nb); + if (ret) { + sun4i_usb_phy_remove(pdev); /* Stop detect work */ + return ret; + } + data->vbus_power_nb_registered = true; + } + + phy_provider = devm_of_phy_provider_register(dev, sun4i_usb_phy_xlate); + if (IS_ERR(phy_provider)) { + sun4i_usb_phy_remove(pdev); /* Stop detect work */ + return PTR_ERR(phy_provider); + } + + dev_dbg(dev, "successfully loaded\n"); + + return 0; +} + +static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = { + .num_phys = 3, + .type = sun4i_a10_phy, + .disc_thresh = 3, + .phyctl_offset = REG_PHYCTL_A10, + .dedicated_clocks = false, +}; + +static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = { + .num_phys = 2, + .type = sun4i_a10_phy, + .disc_thresh = 2, + .phyctl_offset = REG_PHYCTL_A10, + .dedicated_clocks = false, +}; + +static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = { + .num_phys = 3, + .type = sun6i_a31_phy, + .disc_thresh = 3, + .phyctl_offset = REG_PHYCTL_A10, + .dedicated_clocks = true, +}; + +static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = { + .num_phys = 3, + .type = sun4i_a10_phy, + .disc_thresh = 2, + .phyctl_offset = REG_PHYCTL_A10, + .dedicated_clocks = false, +}; + +static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = { + .num_phys = 2, + .type = sun6i_a31_phy, + .disc_thresh = 3, + .phyctl_offset = REG_PHYCTL_A10, + .dedicated_clocks = true, +}; + +static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = { + .num_phys = 2, + .type = sun8i_a33_phy, + .disc_thresh = 3, + .phyctl_offset = REG_PHYCTL_A33, + .dedicated_clocks = true, +}; + +static const struct sun4i_usb_phy_cfg sun8i_a83t_cfg = { + .num_phys = 3, + .hsic_index = 2, + .type = sun8i_a83t_phy, + .phyctl_offset = REG_PHYCTL_A33, + .dedicated_clocks = true, +}; + +static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = { + .num_phys = 4, + .type = sun8i_h3_phy, + .disc_thresh = 3, + .phyctl_offset = REG_PHYCTL_A33, + .dedicated_clocks = true, + .hci_phy_ctl_clear = PHY_CTL_H3_SIDDQ, + .phy0_dual_route = true, +}; + +static const struct sun4i_usb_phy_cfg sun8i_r40_cfg = { + .num_phys = 3, + .type = sun8i_r40_phy, + .disc_thresh = 3, + .phyctl_offset = REG_PHYCTL_A33, + .dedicated_clocks = true, + .hci_phy_ctl_clear = PHY_CTL_H3_SIDDQ, + .phy0_dual_route = true, +}; + +static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = { + .num_phys = 1, + .type = sun8i_v3s_phy, + .disc_thresh = 3, + .phyctl_offset = REG_PHYCTL_A33, + .dedicated_clocks = true, + .hci_phy_ctl_clear = PHY_CTL_H3_SIDDQ, + .phy0_dual_route = true, +}; + +static const struct sun4i_usb_phy_cfg sun20i_d1_cfg = { + .num_phys = 2, + .type = sun50i_h6_phy, + .phyctl_offset = REG_PHYCTL_A33, + .dedicated_clocks = true, + .hci_phy_ctl_clear = PHY_CTL_SIDDQ, + .phy0_dual_route = true, +}; + +static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = { + .num_phys = 2, + .type = sun50i_a64_phy, + .disc_thresh = 3, + .phyctl_offset = REG_PHYCTL_A33, + .dedicated_clocks = true, + .hci_phy_ctl_clear = PHY_CTL_H3_SIDDQ, + .phy0_dual_route = true, +}; + +static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = { + .num_phys = 4, + .type = sun50i_h6_phy, + .phyctl_offset = REG_PHYCTL_A33, + .dedicated_clocks = true, + .phy0_dual_route = true, + .missing_phys = BIT(1) | BIT(2), +}; + +static const struct sun4i_usb_phy_cfg sun50i_h616_cfg = { + .num_phys = 4, + .type = sun50i_h6_phy, + .disc_thresh = 3, + .phyctl_offset = REG_PHYCTL_A33, + .dedicated_clocks = true, + .phy0_dual_route = true, + .hci_phy_ctl_clear = PHY_CTL_SIDDQ, + .needs_phy2_siddq = true, +}; + +static const struct of_device_id sun4i_usb_phy_of_match[] = { + { .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg }, + { .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg }, + { .compatible = "allwinner,sun6i-a31-usb-phy", .data = &sun6i_a31_cfg }, + { .compatible = "allwinner,sun7i-a20-usb-phy", .data = &sun7i_a20_cfg }, + { .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg }, + { .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg }, + { .compatible = "allwinner,sun8i-a83t-usb-phy", .data = &sun8i_a83t_cfg }, + { .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg }, + { .compatible = "allwinner,sun8i-r40-usb-phy", .data = &sun8i_r40_cfg }, + { .compatible = "allwinner,sun8i-v3s-usb-phy", .data = &sun8i_v3s_cfg }, + { .compatible = "allwinner,sun20i-d1-usb-phy", .data = &sun20i_d1_cfg }, + { .compatible = "allwinner,sun50i-a64-usb-phy", + .data = &sun50i_a64_cfg}, + { .compatible = "allwinner,sun50i-h6-usb-phy", .data = &sun50i_h6_cfg }, + { .compatible = "allwinner,sun50i-h616-usb-phy", .data = &sun50i_h616_cfg }, + { }, +}; +MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match); + +static struct platform_driver sun4i_usb_phy_driver = { + .probe = sun4i_usb_phy_probe, + .remove = sun4i_usb_phy_remove, + .driver = { + .of_match_table = sun4i_usb_phy_of_match, + .name = "sun4i-usb-phy", + } +}; +module_platform_driver(sun4i_usb_phy_driver); + +MODULE_DESCRIPTION("Allwinner sun4i USB phy driver"); +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); +MODULE_LICENSE("GPL v2"); |