diff options
Diffstat (limited to '')
-rw-r--r-- | drivers/phy/amlogic/phy-meson-g12a-usb2.c | 372 |
1 files changed, 372 insertions, 0 deletions
diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb2.c b/drivers/phy/amlogic/phy-meson-g12a-usb2.c new file mode 100644 index 000000000..9d1efa0d9 --- /dev/null +++ b/drivers/phy/amlogic/phy-meson-g12a-usb2.c @@ -0,0 +1,372 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Meson G12A USB2 PHY driver + * + * Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com> + * Copyright (C) 2017 Amlogic, Inc. All rights reserved + * Copyright (C) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include <linux/bitfield.h> +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/regmap.h> +#include <linux/reset.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> + +#define PHY_CTRL_R0 0x0 +#define PHY_CTRL_R1 0x4 +#define PHY_CTRL_R2 0x8 +#define PHY_CTRL_R3 0xc + #define PHY_CTRL_R3_SQUELCH_REF GENMASK(1, 0) + #define PHY_CTRL_R3_HSDIC_REF GENMASK(3, 2) + #define PHY_CTRL_R3_DISC_THRESH GENMASK(7, 4) + +#define PHY_CTRL_R4 0x10 + #define PHY_CTRL_R4_CALIB_CODE_7_0 GENMASK(7, 0) + #define PHY_CTRL_R4_CALIB_CODE_15_8 GENMASK(15, 8) + #define PHY_CTRL_R4_CALIB_CODE_23_16 GENMASK(23, 16) + #define PHY_CTRL_R4_I_C2L_CAL_EN BIT(24) + #define PHY_CTRL_R4_I_C2L_CAL_RESET_N BIT(25) + #define PHY_CTRL_R4_I_C2L_CAL_DONE BIT(26) + #define PHY_CTRL_R4_TEST_BYPASS_MODE_EN BIT(27) + #define PHY_CTRL_R4_I_C2L_BIAS_TRIM_1_0 GENMASK(29, 28) + #define PHY_CTRL_R4_I_C2L_BIAS_TRIM_3_2 GENMASK(31, 30) + +#define PHY_CTRL_R5 0x14 +#define PHY_CTRL_R6 0x18 +#define PHY_CTRL_R7 0x1c +#define PHY_CTRL_R8 0x20 +#define PHY_CTRL_R9 0x24 +#define PHY_CTRL_R10 0x28 +#define PHY_CTRL_R11 0x2c +#define PHY_CTRL_R12 0x30 +#define PHY_CTRL_R13 0x34 + #define PHY_CTRL_R13_CUSTOM_PATTERN_19 GENMASK(7, 0) + #define PHY_CTRL_R13_LOAD_STAT BIT(14) + #define PHY_CTRL_R13_UPDATE_PMA_SIGNALS BIT(15) + #define PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET GENMASK(20, 16) + #define PHY_CTRL_R13_CLEAR_HOLD_HS_DISCONNECT BIT(21) + #define PHY_CTRL_R13_BYPASS_HOST_DISCONNECT_VAL BIT(22) + #define PHY_CTRL_R13_BYPASS_HOST_DISCONNECT_EN BIT(23) + #define PHY_CTRL_R13_I_C2L_HS_EN BIT(24) + #define PHY_CTRL_R13_I_C2L_FS_EN BIT(25) + #define PHY_CTRL_R13_I_C2L_LS_EN BIT(26) + #define PHY_CTRL_R13_I_C2L_HS_OE BIT(27) + #define PHY_CTRL_R13_I_C2L_FS_OE BIT(28) + #define PHY_CTRL_R13_I_C2L_HS_RX_EN BIT(29) + #define PHY_CTRL_R13_I_C2L_FSLS_RX_EN BIT(30) + +#define PHY_CTRL_R14 0x38 + #define PHY_CTRL_R14_I_RDP_EN BIT(0) + #define PHY_CTRL_R14_I_RPU_SW1_EN BIT(1) + #define PHY_CTRL_R14_I_RPU_SW2_EN GENMASK(3, 2) + #define PHY_CTRL_R14_PG_RSTN BIT(4) + #define PHY_CTRL_R14_I_C2L_DATA_16_8 BIT(5) + #define PHY_CTRL_R14_I_C2L_ASSERT_SINGLE_EN_ZERO BIT(6) + #define PHY_CTRL_R14_BYPASS_CTRL_7_0 GENMASK(15, 8) + #define PHY_CTRL_R14_BYPASS_CTRL_15_8 GENMASK(23, 16) + +#define PHY_CTRL_R15 0x3c +#define PHY_CTRL_R16 0x40 + #define PHY_CTRL_R16_MPLL_M GENMASK(8, 0) + #define PHY_CTRL_R16_MPLL_N GENMASK(14, 10) + #define PHY_CTRL_R16_MPLL_TDC_MODE BIT(20) + #define PHY_CTRL_R16_MPLL_SDM_EN BIT(21) + #define PHY_CTRL_R16_MPLL_LOAD BIT(22) + #define PHY_CTRL_R16_MPLL_DCO_SDM_EN BIT(23) + #define PHY_CTRL_R16_MPLL_LOCK_LONG GENMASK(25, 24) + #define PHY_CTRL_R16_MPLL_LOCK_F BIT(26) + #define PHY_CTRL_R16_MPLL_FAST_LOCK BIT(27) + #define PHY_CTRL_R16_MPLL_EN BIT(28) + #define PHY_CTRL_R16_MPLL_RESET BIT(29) + #define PHY_CTRL_R16_MPLL_LOCK BIT(30) + #define PHY_CTRL_R16_MPLL_LOCK_DIG BIT(31) + +#define PHY_CTRL_R17 0x44 + #define PHY_CTRL_R17_MPLL_FRAC_IN GENMASK(13, 0) + #define PHY_CTRL_R17_MPLL_FIX_EN BIT(16) + #define PHY_CTRL_R17_MPLL_LAMBDA1 GENMASK(19, 17) + #define PHY_CTRL_R17_MPLL_LAMBDA0 GENMASK(22, 20) + #define PHY_CTRL_R17_MPLL_FILTER_MODE BIT(23) + #define PHY_CTRL_R17_MPLL_FILTER_PVT2 GENMASK(27, 24) + #define PHY_CTRL_R17_MPLL_FILTER_PVT1 GENMASK(31, 28) + +#define PHY_CTRL_R18 0x48 + #define PHY_CTRL_R18_MPLL_LKW_SEL GENMASK(1, 0) + #define PHY_CTRL_R18_MPLL_LK_W GENMASK(5, 2) + #define PHY_CTRL_R18_MPLL_LK_S GENMASK(11, 6) + #define PHY_CTRL_R18_MPLL_DCO_M_EN BIT(12) + #define PHY_CTRL_R18_MPLL_DCO_CLK_SEL BIT(13) + #define PHY_CTRL_R18_MPLL_PFD_GAIN GENMASK(15, 14) + #define PHY_CTRL_R18_MPLL_ROU GENMASK(18, 16) + #define PHY_CTRL_R18_MPLL_DATA_SEL GENMASK(21, 19) + #define PHY_CTRL_R18_MPLL_BIAS_ADJ GENMASK(23, 22) + #define PHY_CTRL_R18_MPLL_BB_MODE GENMASK(25, 24) + #define PHY_CTRL_R18_MPLL_ALPHA GENMASK(28, 26) + #define PHY_CTRL_R18_MPLL_ADJ_LDO GENMASK(30, 29) + #define PHY_CTRL_R18_MPLL_ACG_RANGE BIT(31) + +#define PHY_CTRL_R19 0x4c +#define PHY_CTRL_R20 0x50 + #define PHY_CTRL_R20_USB2_IDDET_EN BIT(0) + #define PHY_CTRL_R20_USB2_OTG_VBUS_TRIM_2_0 GENMASK(3, 1) + #define PHY_CTRL_R20_USB2_OTG_VBUSDET_EN BIT(4) + #define PHY_CTRL_R20_USB2_AMON_EN BIT(5) + #define PHY_CTRL_R20_USB2_CAL_CODE_R5 BIT(6) + #define PHY_CTRL_R20_BYPASS_OTG_DET BIT(7) + #define PHY_CTRL_R20_USB2_DMON_EN BIT(8) + #define PHY_CTRL_R20_USB2_DMON_SEL_3_0 GENMASK(12, 9) + #define PHY_CTRL_R20_USB2_EDGE_DRV_EN BIT(13) + #define PHY_CTRL_R20_USB2_EDGE_DRV_TRIM_1_0 GENMASK(15, 14) + #define PHY_CTRL_R20_USB2_BGR_ADJ_4_0 GENMASK(20, 16) + #define PHY_CTRL_R20_USB2_BGR_START BIT(21) + #define PHY_CTRL_R20_USB2_BGR_VREF_4_0 GENMASK(28, 24) + #define PHY_CTRL_R20_USB2_BGR_DBG_1_0 GENMASK(30, 29) + #define PHY_CTRL_R20_BYPASS_CAL_DONE_R5 BIT(31) + +#define PHY_CTRL_R21 0x54 + #define PHY_CTRL_R21_USB2_BGR_FORCE BIT(0) + #define PHY_CTRL_R21_USB2_CAL_ACK_EN BIT(1) + #define PHY_CTRL_R21_USB2_OTG_ACA_EN BIT(2) + #define PHY_CTRL_R21_USB2_TX_STRG_PD BIT(3) + #define PHY_CTRL_R21_USB2_OTG_ACA_TRIM_1_0 GENMASK(5, 4) + #define PHY_CTRL_R21_BYPASS_UTMI_CNTR GENMASK(15, 6) + #define PHY_CTRL_R21_BYPASS_UTMI_REG GENMASK(25, 20) + +#define PHY_CTRL_R22 0x58 +#define PHY_CTRL_R23 0x5c + +#define RESET_COMPLETE_TIME 1000 +#define PLL_RESET_COMPLETE_TIME 100 + +enum meson_soc_id { + MESON_SOC_G12A = 0, + MESON_SOC_A1, +}; + +struct phy_meson_g12a_usb2_priv { + struct device *dev; + struct regmap *regmap; + struct clk *clk; + struct reset_control *reset; + int soc_id; +}; + +static const struct regmap_config phy_meson_g12a_usb2_regmap_conf = { + .reg_bits = 8, + .val_bits = 32, + .reg_stride = 4, + .max_register = PHY_CTRL_R23, +}; + +static int phy_meson_g12a_usb2_init(struct phy *phy) +{ + struct phy_meson_g12a_usb2_priv *priv = phy_get_drvdata(phy); + int ret; + unsigned int value; + + ret = reset_control_reset(priv->reset); + if (ret) + return ret; + + udelay(RESET_COMPLETE_TIME); + + /* usb2_otg_aca_en == 0 */ + regmap_update_bits(priv->regmap, PHY_CTRL_R21, + PHY_CTRL_R21_USB2_OTG_ACA_EN, 0); + + /* PLL Setup : 24MHz * 20 / 1 = 480MHz */ + regmap_write(priv->regmap, PHY_CTRL_R16, + FIELD_PREP(PHY_CTRL_R16_MPLL_M, 20) | + FIELD_PREP(PHY_CTRL_R16_MPLL_N, 1) | + PHY_CTRL_R16_MPLL_LOAD | + FIELD_PREP(PHY_CTRL_R16_MPLL_LOCK_LONG, 1) | + PHY_CTRL_R16_MPLL_FAST_LOCK | + PHY_CTRL_R16_MPLL_EN | + PHY_CTRL_R16_MPLL_RESET); + + regmap_write(priv->regmap, PHY_CTRL_R17, + FIELD_PREP(PHY_CTRL_R17_MPLL_FRAC_IN, 0) | + FIELD_PREP(PHY_CTRL_R17_MPLL_LAMBDA1, 7) | + FIELD_PREP(PHY_CTRL_R17_MPLL_LAMBDA0, 7) | + FIELD_PREP(PHY_CTRL_R17_MPLL_FILTER_PVT2, 2) | + FIELD_PREP(PHY_CTRL_R17_MPLL_FILTER_PVT1, 9)); + + value = FIELD_PREP(PHY_CTRL_R18_MPLL_LKW_SEL, 1) | + FIELD_PREP(PHY_CTRL_R18_MPLL_LK_W, 9) | + FIELD_PREP(PHY_CTRL_R18_MPLL_LK_S, 0x27) | + FIELD_PREP(PHY_CTRL_R18_MPLL_PFD_GAIN, 1) | + FIELD_PREP(PHY_CTRL_R18_MPLL_ROU, 7) | + FIELD_PREP(PHY_CTRL_R18_MPLL_DATA_SEL, 3) | + FIELD_PREP(PHY_CTRL_R18_MPLL_BIAS_ADJ, 1) | + FIELD_PREP(PHY_CTRL_R18_MPLL_BB_MODE, 0) | + FIELD_PREP(PHY_CTRL_R18_MPLL_ALPHA, 3) | + FIELD_PREP(PHY_CTRL_R18_MPLL_ADJ_LDO, 1) | + PHY_CTRL_R18_MPLL_ACG_RANGE; + + if (priv->soc_id == MESON_SOC_A1) + value |= PHY_CTRL_R18_MPLL_DCO_CLK_SEL; + + regmap_write(priv->regmap, PHY_CTRL_R18, value); + + udelay(PLL_RESET_COMPLETE_TIME); + + /* UnReset PLL */ + regmap_write(priv->regmap, PHY_CTRL_R16, + FIELD_PREP(PHY_CTRL_R16_MPLL_M, 20) | + FIELD_PREP(PHY_CTRL_R16_MPLL_N, 1) | + PHY_CTRL_R16_MPLL_LOAD | + FIELD_PREP(PHY_CTRL_R16_MPLL_LOCK_LONG, 1) | + PHY_CTRL_R16_MPLL_FAST_LOCK | + PHY_CTRL_R16_MPLL_EN); + + /* PHY Tuning */ + regmap_write(priv->regmap, PHY_CTRL_R20, + FIELD_PREP(PHY_CTRL_R20_USB2_OTG_VBUS_TRIM_2_0, 4) | + PHY_CTRL_R20_USB2_OTG_VBUSDET_EN | + FIELD_PREP(PHY_CTRL_R20_USB2_DMON_SEL_3_0, 15) | + PHY_CTRL_R20_USB2_EDGE_DRV_EN | + FIELD_PREP(PHY_CTRL_R20_USB2_EDGE_DRV_TRIM_1_0, 3) | + FIELD_PREP(PHY_CTRL_R20_USB2_BGR_ADJ_4_0, 0) | + FIELD_PREP(PHY_CTRL_R20_USB2_BGR_VREF_4_0, 0) | + FIELD_PREP(PHY_CTRL_R20_USB2_BGR_DBG_1_0, 0)); + + if (priv->soc_id == MESON_SOC_G12A) + regmap_write(priv->regmap, PHY_CTRL_R4, + FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_7_0, 0xf) | + FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_15_8, 0xf) | + FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_23_16, 0xf) | + PHY_CTRL_R4_TEST_BYPASS_MODE_EN | + FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_1_0, 0) | + FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_3_2, 0)); + else if (priv->soc_id == MESON_SOC_A1) { + regmap_write(priv->regmap, PHY_CTRL_R21, + PHY_CTRL_R21_USB2_CAL_ACK_EN | + PHY_CTRL_R21_USB2_TX_STRG_PD | + FIELD_PREP(PHY_CTRL_R21_USB2_OTG_ACA_TRIM_1_0, 2)); + + /* Analog Settings */ + regmap_write(priv->regmap, PHY_CTRL_R13, + FIELD_PREP(PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET, 7)); + } + + /* Tuning Disconnect Threshold */ + regmap_write(priv->regmap, PHY_CTRL_R3, + FIELD_PREP(PHY_CTRL_R3_SQUELCH_REF, 0) | + FIELD_PREP(PHY_CTRL_R3_HSDIC_REF, 1) | + FIELD_PREP(PHY_CTRL_R3_DISC_THRESH, 3)); + + if (priv->soc_id == MESON_SOC_G12A) { + /* Analog Settings */ + regmap_write(priv->regmap, PHY_CTRL_R14, 0); + regmap_write(priv->regmap, PHY_CTRL_R13, + PHY_CTRL_R13_UPDATE_PMA_SIGNALS | + FIELD_PREP(PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET, 7)); + } + + return 0; +} + +static int phy_meson_g12a_usb2_exit(struct phy *phy) +{ + struct phy_meson_g12a_usb2_priv *priv = phy_get_drvdata(phy); + + return reset_control_reset(priv->reset); +} + +/* set_mode is not needed, mode setting is handled via the UTMI bus */ +static const struct phy_ops phy_meson_g12a_usb2_ops = { + .init = phy_meson_g12a_usb2_init, + .exit = phy_meson_g12a_usb2_exit, + .owner = THIS_MODULE, +}; + +static int phy_meson_g12a_usb2_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + struct phy_meson_g12a_usb2_priv *priv; + struct phy *phy; + void __iomem *base; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = dev; + platform_set_drvdata(pdev, priv); + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return PTR_ERR(base); + + priv->soc_id = (enum meson_soc_id)of_device_get_match_data(&pdev->dev); + + priv->regmap = devm_regmap_init_mmio(dev, base, + &phy_meson_g12a_usb2_regmap_conf); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + + priv->clk = devm_clk_get(dev, "xtal"); + if (IS_ERR(priv->clk)) + return PTR_ERR(priv->clk); + + priv->reset = devm_reset_control_get(dev, "phy"); + if (IS_ERR(priv->reset)) + return PTR_ERR(priv->reset); + + ret = reset_control_deassert(priv->reset); + if (ret) + return ret; + + phy = devm_phy_create(dev, NULL, &phy_meson_g12a_usb2_ops); + if (IS_ERR(phy)) { + ret = PTR_ERR(phy); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to create PHY\n"); + + return ret; + } + + phy_set_bus_width(phy, 8); + phy_set_drvdata(phy, priv); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id phy_meson_g12a_usb2_of_match[] = { + { + .compatible = "amlogic,g12a-usb2-phy", + .data = (void *)MESON_SOC_G12A, + }, + { + .compatible = "amlogic,a1-usb2-phy", + .data = (void *)MESON_SOC_A1, + }, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(of, phy_meson_g12a_usb2_of_match); + +static struct platform_driver phy_meson_g12a_usb2_driver = { + .probe = phy_meson_g12a_usb2_probe, + .driver = { + .name = "phy-meson-g12a-usb2", + .of_match_table = phy_meson_g12a_usb2_of_match, + }, +}; +module_platform_driver(phy_meson_g12a_usb2_driver); + +MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>"); +MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>"); +MODULE_DESCRIPTION("Meson G12A USB2 PHY driver"); +MODULE_LICENSE("GPL v2"); |