summaryrefslogtreecommitdiffstats
path: root/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c436
1 files changed, 436 insertions, 0 deletions
diff --git a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c
new file mode 100644
index 000000000..3b374b37b
--- /dev/null
+++ b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c
@@ -0,0 +1,436 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2018, Broadcom */
+
+/*
+ * This module contains USB PHY initialization for power up and S3 resume
+ * for newer Synopsys based USB hardware first used on the bcm7216.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <linux/soc/brcmstb/brcmstb.h>
+#include "phy-brcm-usb-init.h"
+
+#define PHY_LOCK_TIMEOUT_MS 200
+
+/* Register definitions for syscon piarbctl registers */
+#define PIARBCTL_CAM 0x00
+#define PIARBCTL_SPLITTER 0x04
+#define PIARBCTL_MISC 0x08
+#define PIARBCTL_MISC_SECURE_MASK 0x80000000
+#define PIARBCTL_MISC_USB_SELECT_MASK 0x40000000
+#define PIARBCTL_MISC_USB_4G_SDRAM_MASK 0x20000000
+#define PIARBCTL_MISC_USB_PRIORITY_MASK 0x000f0000
+#define PIARBCTL_MISC_USB_MEM_PAGE_MASK 0x0000f000
+#define PIARBCTL_MISC_CAM1_MEM_PAGE_MASK 0x00000f00
+#define PIARBCTL_MISC_CAM0_MEM_PAGE_MASK 0x000000f0
+#define PIARBCTL_MISC_SATA_PRIORITY_MASK 0x0000000f
+
+#define PIARBCTL_MISC_USB_ONLY_MASK \
+ (PIARBCTL_MISC_USB_SELECT_MASK | \
+ PIARBCTL_MISC_USB_4G_SDRAM_MASK | \
+ PIARBCTL_MISC_USB_PRIORITY_MASK | \
+ PIARBCTL_MISC_USB_MEM_PAGE_MASK)
+
+/* Register definitions for the USB CTRL block */
+#define USB_CTRL_SETUP 0x00
+#define USB_CTRL_SETUP_STRAP_IPP_SEL_MASK 0x02000000
+#define USB_CTRL_SETUP_SCB2_EN_MASK 0x00008000
+#define USB_CTRL_SETUP_tca_drv_sel_MASK 0x01000000
+#define USB_CTRL_SETUP_SCB1_EN_MASK 0x00004000
+#define USB_CTRL_SETUP_SOFT_SHUTDOWN_MASK 0x00000200
+#define USB_CTRL_SETUP_IPP_MASK 0x00000020
+#define USB_CTRL_SETUP_IOC_MASK 0x00000010
+#define USB_CTRL_USB_PM 0x04
+#define USB_CTRL_USB_PM_USB_PWRDN_MASK 0x80000000
+#define USB_CTRL_USB_PM_SOFT_RESET_MASK 0x40000000
+#define USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK 0x00800000
+#define USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK 0x00400000
+#define USB_CTRL_USB_PM_XHC_PME_EN_MASK 0x00000010
+#define USB_CTRL_USB_PM_XHC_S2_CLK_SWITCH_EN_MASK 0x00000008
+#define USB_CTRL_USB_PM_STATUS 0x08
+#define USB_CTRL_USB_DEVICE_CTL1 0x10
+#define USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK 0x00000003
+#define USB_CTRL_TEST_PORT_CTL 0x30
+#define USB_CTRL_TEST_PORT_CTL_TPOUT_SEL_MASK 0x000000ff
+#define USB_CTRL_TEST_PORT_CTL_TPOUT_SEL_PME_GEN_MASK 0x0000002e
+#define USB_CTRL_TP_DIAG1 0x34
+#define USB_CTLR_TP_DIAG1_wake_MASK 0x00000002
+#define USB_CTRL_CTLR_CSHCR 0x50
+#define USB_CTRL_CTLR_CSHCR_ctl_pme_en_MASK 0x00040000
+
+/* Register definitions for the USB_PHY block in 7211b0 */
+#define USB_PHY_PLL_CTL 0x00
+#define USB_PHY_PLL_CTL_PLL_RESETB_MASK 0x40000000
+#define USB_PHY_PLL_LDO_CTL 0x08
+#define USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK 0x00000004
+#define USB_PHY_PLL_LDO_CTL_AFE_LDO_PWRDWNB_MASK 0x00000002
+#define USB_PHY_PLL_LDO_CTL_AFE_BG_PWRDWNB_MASK 0x00000001
+#define USB_PHY_UTMI_CTL_1 0x04
+#define USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK 0x00000800
+#define USB_PHY_UTMI_CTL_1_PHY_MODE_MASK 0x0000000c
+#define USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT 2
+#define USB_PHY_IDDQ 0x1c
+#define USB_PHY_IDDQ_phy_iddq_MASK 0x00000001
+#define USB_PHY_STATUS 0x20
+#define USB_PHY_STATUS_pll_lock_MASK 0x00000001
+
+/* Register definitions for the MDIO registers in the DWC2 block of
+ * the 7211b0.
+ * NOTE: The PHY's MDIO registers are only accessible through the
+ * legacy DesignWare USB controller even though it's not being used.
+ */
+#define USB_GMDIOCSR 0
+#define USB_GMDIOGEN 4
+
+/* Register definitions for the BDC EC block in 7211b0 */
+#define BDC_EC_AXIRDA 0x0c
+#define BDC_EC_AXIRDA_RTS_MASK 0xf0000000
+#define BDC_EC_AXIRDA_RTS_SHIFT 28
+
+
+static void usb_mdio_write_7211b0(struct brcm_usb_init_params *params,
+ uint8_t addr, uint16_t data)
+{
+ void __iomem *usb_mdio = params->regs[BRCM_REGS_USB_MDIO];
+
+ addr &= 0x1f; /* 5-bit address */
+ brcm_usb_writel(0xffffffff, usb_mdio + USB_GMDIOGEN);
+ while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
+ ;
+ brcm_usb_writel(0x59020000 | (addr << 18) | data,
+ usb_mdio + USB_GMDIOGEN);
+ while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
+ ;
+ brcm_usb_writel(0x00000000, usb_mdio + USB_GMDIOGEN);
+ while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
+ ;
+}
+
+static uint16_t __maybe_unused usb_mdio_read_7211b0(
+ struct brcm_usb_init_params *params, uint8_t addr)
+{
+ void __iomem *usb_mdio = params->regs[BRCM_REGS_USB_MDIO];
+
+ addr &= 0x1f; /* 5-bit address */
+ brcm_usb_writel(0xffffffff, usb_mdio + USB_GMDIOGEN);
+ while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
+ ;
+ brcm_usb_writel(0x69020000 | (addr << 18), usb_mdio + USB_GMDIOGEN);
+ while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
+ ;
+ brcm_usb_writel(0x00000000, usb_mdio + USB_GMDIOGEN);
+ while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
+ ;
+ return brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & 0xffff;
+}
+
+static void usb2_eye_fix_7211b0(struct brcm_usb_init_params *params)
+{
+ /* select bank */
+ usb_mdio_write_7211b0(params, 0x1f, 0x80a0);
+
+ /* Set the eye */
+ usb_mdio_write_7211b0(params, 0x0a, 0xc6a0);
+}
+
+static void xhci_soft_reset(struct brcm_usb_init_params *params,
+ int on_off)
+{
+ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
+
+ /* Assert reset */
+ if (on_off)
+ USB_CTRL_UNSET(ctrl, USB_PM, XHC_SOFT_RESETB);
+ /* De-assert reset */
+ else
+ USB_CTRL_SET(ctrl, USB_PM, XHC_SOFT_RESETB);
+}
+
+static void usb_init_ipp(struct brcm_usb_init_params *params)
+{
+ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
+ u32 reg;
+ u32 orig_reg;
+
+ pr_debug("%s\n", __func__);
+
+ orig_reg = reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP));
+ if (params->ipp != 2)
+ /* override ipp strap pin (if it exits) */
+ reg &= ~(USB_CTRL_MASK(SETUP, STRAP_IPP_SEL));
+
+ /* Override the default OC and PP polarity */
+ reg &= ~(USB_CTRL_MASK(SETUP, IPP) | USB_CTRL_MASK(SETUP, IOC));
+ if (params->ioc)
+ reg |= USB_CTRL_MASK(SETUP, IOC);
+ if (params->ipp == 1)
+ reg |= USB_CTRL_MASK(SETUP, IPP);
+ brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
+
+ /*
+ * If we're changing IPP, make sure power is off long enough
+ * to turn off any connected devices.
+ */
+ if ((reg ^ orig_reg) & USB_CTRL_MASK(SETUP, IPP))
+ msleep(50);
+}
+
+static void syscon_piarbctl_init(struct regmap *rmap)
+{
+ /* Switch from legacy USB OTG controller to new STB USB controller */
+ regmap_update_bits(rmap, PIARBCTL_MISC, PIARBCTL_MISC_USB_ONLY_MASK,
+ PIARBCTL_MISC_USB_SELECT_MASK |
+ PIARBCTL_MISC_USB_4G_SDRAM_MASK);
+}
+
+static void usb_init_common(struct brcm_usb_init_params *params)
+{
+ u32 reg;
+ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
+
+ pr_debug("%s\n", __func__);
+
+ if (USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE)) {
+ reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
+ reg &= ~USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE);
+ reg |= params->mode;
+ brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
+ }
+ switch (params->mode) {
+ case USB_CTLR_MODE_HOST:
+ USB_CTRL_UNSET(ctrl, USB_PM, BDC_SOFT_RESETB);
+ break;
+ default:
+ USB_CTRL_UNSET(ctrl, USB_PM, BDC_SOFT_RESETB);
+ USB_CTRL_SET(ctrl, USB_PM, BDC_SOFT_RESETB);
+ break;
+ }
+}
+
+static void usb_wake_enable_7211b0(struct brcm_usb_init_params *params,
+ bool enable)
+{
+ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
+
+ if (enable)
+ USB_CTRL_SET(ctrl, CTLR_CSHCR, ctl_pme_en);
+ else
+ USB_CTRL_UNSET(ctrl, CTLR_CSHCR, ctl_pme_en);
+}
+
+static void usb_wake_enable_7216(struct brcm_usb_init_params *params,
+ bool enable)
+{
+ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
+
+ if (enable)
+ USB_CTRL_SET(ctrl, USB_PM, XHC_PME_EN);
+ else
+ USB_CTRL_UNSET(ctrl, USB_PM, XHC_PME_EN);
+}
+
+static void usb_init_common_7211b0(struct brcm_usb_init_params *params)
+{
+ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
+ void __iomem *usb_phy = params->regs[BRCM_REGS_USB_PHY];
+ void __iomem *bdc_ec = params->regs[BRCM_REGS_BDC_EC];
+ int timeout_ms = PHY_LOCK_TIMEOUT_MS;
+ u32 reg;
+
+ if (params->syscon_piarbctl)
+ syscon_piarbctl_init(params->syscon_piarbctl);
+
+ USB_CTRL_UNSET(ctrl, USB_PM, USB_PWRDN);
+
+ usb_wake_enable_7211b0(params, false);
+ if (!params->wake_enabled) {
+
+ /* undo possible suspend settings */
+ brcm_usb_writel(0, usb_phy + USB_PHY_IDDQ);
+ reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_CTL);
+ reg |= USB_PHY_PLL_CTL_PLL_RESETB_MASK;
+ brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_CTL);
+
+ /* temporarily enable FSM so PHY comes up properly */
+ reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1);
+ reg |= USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK;
+ brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1);
+ }
+
+ /* Init the PHY */
+ reg = USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK |
+ USB_PHY_PLL_LDO_CTL_AFE_LDO_PWRDWNB_MASK |
+ USB_PHY_PLL_LDO_CTL_AFE_BG_PWRDWNB_MASK;
+ brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_LDO_CTL);
+
+ /* wait for lock */
+ while (timeout_ms-- > 0) {
+ reg = brcm_usb_readl(usb_phy + USB_PHY_STATUS);
+ if (reg & USB_PHY_STATUS_pll_lock_MASK)
+ break;
+ usleep_range(1000, 2000);
+ }
+
+ /* Set the PHY_MODE */
+ reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1);
+ reg &= ~USB_PHY_UTMI_CTL_1_PHY_MODE_MASK;
+ reg |= params->mode << USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT;
+ brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1);
+
+ usb_init_common(params);
+
+ /*
+ * The BDC controller will get occasional failures with
+ * the default "Read Transaction Size" of 6 (1024 bytes).
+ * Set it to 4 (256 bytes).
+ */
+ if ((params->mode != USB_CTLR_MODE_HOST) && bdc_ec) {
+ reg = brcm_usb_readl(bdc_ec + BDC_EC_AXIRDA);
+ reg &= ~BDC_EC_AXIRDA_RTS_MASK;
+ reg |= (0x4 << BDC_EC_AXIRDA_RTS_SHIFT);
+ brcm_usb_writel(reg, bdc_ec + BDC_EC_AXIRDA);
+ }
+
+ /*
+ * Disable FSM, otherwise the PHY will auto suspend when no
+ * device is connected and will be reset on resume.
+ */
+ reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1);
+ reg &= ~USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK;
+ brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1);
+
+ usb2_eye_fix_7211b0(params);
+}
+
+static void usb_init_common_7216(struct brcm_usb_init_params *params)
+{
+ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
+
+ USB_CTRL_UNSET(ctrl, USB_PM, XHC_S2_CLK_SWITCH_EN);
+ USB_CTRL_UNSET(ctrl, USB_PM, USB_PWRDN);
+
+ /* 1 millisecond - for USB clocks to settle down */
+ usleep_range(1000, 2000);
+
+ usb_wake_enable_7216(params, false);
+ usb_init_common(params);
+}
+
+static void usb_init_xhci(struct brcm_usb_init_params *params)
+{
+ pr_debug("%s\n", __func__);
+
+ xhci_soft_reset(params, 0);
+}
+
+static void usb_uninit_common_7216(struct brcm_usb_init_params *params)
+{
+ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
+
+ pr_debug("%s\n", __func__);
+
+ if (params->wake_enabled) {
+ /* Switch to using slower clock during suspend to save power */
+ USB_CTRL_SET(ctrl, USB_PM, XHC_S2_CLK_SWITCH_EN);
+ usb_wake_enable_7216(params, true);
+ } else {
+ USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN);
+ }
+}
+
+static void usb_uninit_common_7211b0(struct brcm_usb_init_params *params)
+{
+ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
+ void __iomem *usb_phy = params->regs[BRCM_REGS_USB_PHY];
+ u32 reg;
+
+ pr_debug("%s\n", __func__);
+
+ if (params->wake_enabled) {
+ USB_CTRL_SET(ctrl, TEST_PORT_CTL, TPOUT_SEL_PME_GEN);
+ usb_wake_enable_7211b0(params, true);
+ } else {
+ USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN);
+ brcm_usb_writel(0, usb_phy + USB_PHY_PLL_LDO_CTL);
+ reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_CTL);
+ reg &= ~USB_PHY_PLL_CTL_PLL_RESETB_MASK;
+ brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_CTL);
+ brcm_usb_writel(USB_PHY_IDDQ_phy_iddq_MASK,
+ usb_phy + USB_PHY_IDDQ);
+ }
+
+}
+
+static void usb_uninit_xhci(struct brcm_usb_init_params *params)
+{
+
+ pr_debug("%s\n", __func__);
+
+ if (!params->wake_enabled)
+ xhci_soft_reset(params, 1);
+}
+
+static int usb_get_dual_select(struct brcm_usb_init_params *params)
+{
+ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
+ u32 reg = 0;
+
+ pr_debug("%s\n", __func__);
+
+ reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
+ reg &= USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE);
+ return reg;
+}
+
+static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode)
+{
+ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
+ u32 reg;
+
+ pr_debug("%s\n", __func__);
+
+ reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
+ reg &= ~USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE);
+ reg |= mode;
+ brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
+}
+
+static const struct brcm_usb_init_ops bcm7216_ops = {
+ .init_ipp = usb_init_ipp,
+ .init_common = usb_init_common_7216,
+ .init_xhci = usb_init_xhci,
+ .uninit_common = usb_uninit_common_7216,
+ .uninit_xhci = usb_uninit_xhci,
+ .get_dual_select = usb_get_dual_select,
+ .set_dual_select = usb_set_dual_select,
+};
+
+static const struct brcm_usb_init_ops bcm7211b0_ops = {
+ .init_ipp = usb_init_ipp,
+ .init_common = usb_init_common_7211b0,
+ .init_xhci = usb_init_xhci,
+ .uninit_common = usb_uninit_common_7211b0,
+ .uninit_xhci = usb_uninit_xhci,
+ .get_dual_select = usb_get_dual_select,
+ .set_dual_select = usb_set_dual_select,
+};
+
+void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params)
+{
+
+ pr_debug("%s\n", __func__);
+
+ params->family_name = "7216";
+ params->ops = &bcm7216_ops;
+}
+
+void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params)
+{
+
+ pr_debug("%s\n", __func__);
+
+ params->family_name = "7211";
+ params->ops = &bcm7211b0_ops;
+}