summaryrefslogtreecommitdiffstats
path: root/drivers/phy/qualcomm/phy-qcom-edp.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/phy/qualcomm/phy-qcom-edp.c864
1 files changed, 864 insertions, 0 deletions
diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
new file mode 100644
index 000000000..fc8ca0f30
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -0,0 +1,864 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017, 2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021, Linaro Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/phy/phy.h>
+
+#include "phy-qcom-qmp.h"
+
+/* EDP_PHY registers */
+#define DP_PHY_CFG 0x0010
+#define DP_PHY_CFG_1 0x0014
+#define DP_PHY_PD_CTL 0x001c
+#define DP_PHY_MODE 0x0020
+
+#define DP_PHY_AUX_CFG0 0x0024
+#define DP_PHY_AUX_CFG1 0x0028
+#define DP_PHY_AUX_CFG2 0x002C
+#define DP_PHY_AUX_CFG3 0x0030
+#define DP_PHY_AUX_CFG4 0x0034
+#define DP_PHY_AUX_CFG5 0x0038
+#define DP_PHY_AUX_CFG6 0x003C
+#define DP_PHY_AUX_CFG7 0x0040
+#define DP_PHY_AUX_CFG8 0x0044
+#define DP_PHY_AUX_CFG9 0x0048
+
+#define DP_PHY_AUX_INTERRUPT_MASK 0x0058
+
+#define DP_PHY_VCO_DIV 0x0074
+#define DP_PHY_TX0_TX1_LANE_CTL 0x007c
+#define DP_PHY_TX2_TX3_LANE_CTL 0x00a0
+
+#define DP_PHY_STATUS 0x00e0
+
+/* LANE_TXn registers */
+#define TXn_CLKBUF_ENABLE 0x0000
+#define TXn_TX_EMP_POST1_LVL 0x0004
+
+#define TXn_TX_DRV_LVL 0x0014
+#define TXn_TX_DRV_LVL_OFFSET 0x0018
+#define TXn_RESET_TSYNC_EN 0x001c
+#define TXn_LDO_CONFIG 0x0084
+#define TXn_TX_BAND 0x0028
+
+#define TXn_RES_CODE_LANE_OFFSET_TX0 0x0044
+#define TXn_RES_CODE_LANE_OFFSET_TX1 0x0048
+
+#define TXn_TRANSCEIVER_BIAS_EN 0x0054
+#define TXn_HIGHZ_DRVR_EN 0x0058
+#define TXn_TX_POL_INV 0x005c
+#define TXn_LANE_MODE_1 0x0064
+
+#define TXn_TRAN_DRVR_EMP_EN 0x0078
+
+struct qcom_edp_cfg {
+ bool is_dp;
+
+ /* DP PHY swing and pre_emphasis tables */
+ const u8 (*swing_hbr_rbr)[4][4];
+ const u8 (*swing_hbr3_hbr2)[4][4];
+ const u8 (*pre_emphasis_hbr_rbr)[4][4];
+ const u8 (*pre_emphasis_hbr3_hbr2)[4][4];
+};
+
+struct qcom_edp {
+ struct device *dev;
+ const struct qcom_edp_cfg *cfg;
+
+ struct phy *phy;
+
+ void __iomem *edp;
+ void __iomem *tx0;
+ void __iomem *tx1;
+ void __iomem *pll;
+
+ struct clk_hw dp_link_hw;
+ struct clk_hw dp_pixel_hw;
+
+ struct phy_configure_opts_dp dp_opts;
+
+ struct clk_bulk_data clks[2];
+ struct regulator_bulk_data supplies[2];
+};
+
+static const u8 dp_swing_hbr_rbr[4][4] = {
+ { 0x08, 0x0f, 0x16, 0x1f },
+ { 0x11, 0x1e, 0x1f, 0xff },
+ { 0x16, 0x1f, 0xff, 0xff },
+ { 0x1f, 0xff, 0xff, 0xff }
+};
+
+static const u8 dp_pre_emp_hbr_rbr[4][4] = {
+ { 0x00, 0x0d, 0x14, 0x1a },
+ { 0x00, 0x0e, 0x15, 0xff },
+ { 0x00, 0x0e, 0xff, 0xff },
+ { 0x03, 0xff, 0xff, 0xff }
+};
+
+static const u8 dp_swing_hbr2_hbr3[4][4] = {
+ { 0x02, 0x12, 0x16, 0x1a },
+ { 0x09, 0x19, 0x1f, 0xff },
+ { 0x10, 0x1f, 0xff, 0xff },
+ { 0x1f, 0xff, 0xff, 0xff }
+};
+
+static const u8 dp_pre_emp_hbr2_hbr3[4][4] = {
+ { 0x00, 0x0c, 0x15, 0x1b },
+ { 0x02, 0x0e, 0x16, 0xff },
+ { 0x02, 0x11, 0xff, 0xff },
+ { 0x04, 0xff, 0xff, 0xff }
+};
+
+static const struct qcom_edp_cfg dp_phy_cfg = {
+ .is_dp = true,
+ .swing_hbr_rbr = &dp_swing_hbr_rbr,
+ .swing_hbr3_hbr2 = &dp_swing_hbr2_hbr3,
+ .pre_emphasis_hbr_rbr = &dp_pre_emp_hbr_rbr,
+ .pre_emphasis_hbr3_hbr2 = &dp_pre_emp_hbr2_hbr3,
+};
+
+static const u8 edp_swing_hbr_rbr[4][4] = {
+ { 0x07, 0x0f, 0x16, 0x1f },
+ { 0x0d, 0x16, 0x1e, 0xff },
+ { 0x11, 0x1b, 0xff, 0xff },
+ { 0x16, 0xff, 0xff, 0xff }
+};
+
+static const u8 edp_pre_emp_hbr_rbr[4][4] = {
+ { 0x05, 0x12, 0x17, 0x1d },
+ { 0x05, 0x11, 0x18, 0xff },
+ { 0x06, 0x11, 0xff, 0xff },
+ { 0x00, 0xff, 0xff, 0xff }
+};
+
+static const u8 edp_swing_hbr2_hbr3[4][4] = {
+ { 0x0b, 0x11, 0x17, 0x1c },
+ { 0x10, 0x19, 0x1f, 0xff },
+ { 0x19, 0x1f, 0xff, 0xff },
+ { 0x1f, 0xff, 0xff, 0xff }
+};
+
+static const u8 edp_pre_emp_hbr2_hbr3[4][4] = {
+ { 0x08, 0x11, 0x17, 0x1b },
+ { 0x00, 0x0c, 0x13, 0xff },
+ { 0x05, 0x10, 0xff, 0xff },
+ { 0x00, 0xff, 0xff, 0xff }
+};
+
+static const struct qcom_edp_cfg edp_phy_cfg = {
+ .is_dp = false,
+ .swing_hbr_rbr = &edp_swing_hbr_rbr,
+ .swing_hbr3_hbr2 = &edp_swing_hbr2_hbr3,
+ .pre_emphasis_hbr_rbr = &edp_pre_emp_hbr_rbr,
+ .pre_emphasis_hbr3_hbr2 = &edp_pre_emp_hbr2_hbr3,
+};
+
+static int qcom_edp_phy_init(struct phy *phy)
+{
+ struct qcom_edp *edp = phy_get_drvdata(phy);
+ const struct qcom_edp_cfg *cfg = edp->cfg;
+ int ret;
+ u8 cfg8;
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(edp->supplies), edp->supplies);
+ if (ret)
+ return ret;
+
+ ret = clk_bulk_prepare_enable(ARRAY_SIZE(edp->clks), edp->clks);
+ if (ret)
+ goto out_disable_supplies;
+
+ writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
+ edp->edp + DP_PHY_PD_CTL);
+
+ /* Turn on BIAS current for PHY/PLL */
+ writel(0x17, edp->pll + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
+
+ writel(DP_PHY_PD_CTL_PSR_PWRDN, edp->edp + DP_PHY_PD_CTL);
+ msleep(20);
+
+ writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_LANE_0_1_PWRDN | DP_PHY_PD_CTL_LANE_2_3_PWRDN |
+ DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
+ edp->edp + DP_PHY_PD_CTL);
+
+ if (cfg && cfg->is_dp)
+ cfg8 = 0xb7;
+ else
+ cfg8 = 0x37;
+
+ writel(0xfc, edp->edp + DP_PHY_MODE);
+
+ writel(0x00, edp->edp + DP_PHY_AUX_CFG0);
+ writel(0x13, edp->edp + DP_PHY_AUX_CFG1);
+ writel(0x24, edp->edp + DP_PHY_AUX_CFG2);
+ writel(0x00, edp->edp + DP_PHY_AUX_CFG3);
+ writel(0x0a, edp->edp + DP_PHY_AUX_CFG4);
+ writel(0x26, edp->edp + DP_PHY_AUX_CFG5);
+ writel(0x0a, edp->edp + DP_PHY_AUX_CFG6);
+ writel(0x03, edp->edp + DP_PHY_AUX_CFG7);
+ writel(cfg8, edp->edp + DP_PHY_AUX_CFG8);
+ writel(0x03, edp->edp + DP_PHY_AUX_CFG9);
+
+ writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
+ PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
+ PHY_AUX_REQ_ERR_MASK, edp->edp + DP_PHY_AUX_INTERRUPT_MASK);
+
+ msleep(20);
+
+ return 0;
+
+out_disable_supplies:
+ regulator_bulk_disable(ARRAY_SIZE(edp->supplies), edp->supplies);
+
+ return ret;
+}
+
+static int qcom_edp_set_voltages(struct qcom_edp *edp, const struct phy_configure_opts_dp *dp_opts)
+{
+ const struct qcom_edp_cfg *cfg = edp->cfg;
+ unsigned int v_level = 0;
+ unsigned int p_level = 0;
+ u8 ldo_config;
+ u8 swing;
+ u8 emph;
+ int i;
+
+ if (!cfg)
+ return 0;
+
+ for (i = 0; i < dp_opts->lanes; i++) {
+ v_level = max(v_level, dp_opts->voltage[i]);
+ p_level = max(p_level, dp_opts->pre[i]);
+ }
+
+ if (dp_opts->link_rate <= 2700) {
+ swing = (*cfg->swing_hbr_rbr)[v_level][p_level];
+ emph = (*cfg->pre_emphasis_hbr_rbr)[v_level][p_level];
+ } else {
+ swing = (*cfg->swing_hbr3_hbr2)[v_level][p_level];
+ emph = (*cfg->pre_emphasis_hbr3_hbr2)[v_level][p_level];
+ }
+
+ if (swing == 0xff || emph == 0xff)
+ return -EINVAL;
+
+ ldo_config = (cfg && cfg->is_dp) ? 0x1 : 0x0;
+
+ writel(ldo_config, edp->tx0 + TXn_LDO_CONFIG);
+ writel(swing, edp->tx0 + TXn_TX_DRV_LVL);
+ writel(emph, edp->tx0 + TXn_TX_EMP_POST1_LVL);
+
+ writel(ldo_config, edp->tx1 + TXn_LDO_CONFIG);
+ writel(swing, edp->tx1 + TXn_TX_DRV_LVL);
+ writel(emph, edp->tx1 + TXn_TX_EMP_POST1_LVL);
+
+ return 0;
+}
+
+static int qcom_edp_phy_configure(struct phy *phy, union phy_configure_opts *opts)
+{
+ const struct phy_configure_opts_dp *dp_opts = &opts->dp;
+ struct qcom_edp *edp = phy_get_drvdata(phy);
+ int ret = 0;
+
+ memcpy(&edp->dp_opts, dp_opts, sizeof(*dp_opts));
+
+ if (dp_opts->set_voltages)
+ ret = qcom_edp_set_voltages(edp, dp_opts);
+
+ return ret;
+}
+
+static int qcom_edp_configure_ssc(const struct qcom_edp *edp)
+{
+ const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
+ u32 step1;
+ u32 step2;
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ case 2700:
+ case 8100:
+ step1 = 0x45;
+ step2 = 0x06;
+ break;
+
+ case 5400:
+ step1 = 0x5c;
+ step2 = 0x08;
+ break;
+
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
+ }
+
+ writel(0x01, edp->pll + QSERDES_V4_COM_SSC_EN_CENTER);
+ writel(0x00, edp->pll + QSERDES_V4_COM_SSC_ADJ_PER1);
+ writel(0x36, edp->pll + QSERDES_V4_COM_SSC_PER1);
+ writel(0x01, edp->pll + QSERDES_V4_COM_SSC_PER2);
+ writel(step1, edp->pll + QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0);
+ writel(step2, edp->pll + QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0);
+
+ return 0;
+}
+
+static int qcom_edp_configure_pll(const struct qcom_edp *edp)
+{
+ const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
+ u32 div_frac_start2_mode0;
+ u32 div_frac_start3_mode0;
+ u32 dec_start_mode0;
+ u32 lock_cmp1_mode0;
+ u32 lock_cmp2_mode0;
+ u32 hsclk_sel;
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ hsclk_sel = 0x5;
+ dec_start_mode0 = 0x69;
+ div_frac_start2_mode0 = 0x80;
+ div_frac_start3_mode0 = 0x07;
+ lock_cmp1_mode0 = 0x6f;
+ lock_cmp2_mode0 = 0x08;
+ break;
+
+ case 2700:
+ hsclk_sel = 0x3;
+ dec_start_mode0 = 0x69;
+ div_frac_start2_mode0 = 0x80;
+ div_frac_start3_mode0 = 0x07;
+ lock_cmp1_mode0 = 0x0f;
+ lock_cmp2_mode0 = 0x0e;
+ break;
+
+ case 5400:
+ hsclk_sel = 0x1;
+ dec_start_mode0 = 0x8c;
+ div_frac_start2_mode0 = 0x00;
+ div_frac_start3_mode0 = 0x0a;
+ lock_cmp1_mode0 = 0x1f;
+ lock_cmp2_mode0 = 0x1c;
+ break;
+
+ case 8100:
+ hsclk_sel = 0x0;
+ dec_start_mode0 = 0x69;
+ div_frac_start2_mode0 = 0x80;
+ div_frac_start3_mode0 = 0x07;
+ lock_cmp1_mode0 = 0x2f;
+ lock_cmp2_mode0 = 0x2a;
+ break;
+
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
+ }
+
+ writel(0x01, edp->pll + QSERDES_V4_COM_SVS_MODE_CLK_SEL);
+ writel(0x0b, edp->pll + QSERDES_V4_COM_SYSCLK_EN_SEL);
+ writel(0x02, edp->pll + QSERDES_V4_COM_SYS_CLK_CTRL);
+ writel(0x0c, edp->pll + QSERDES_V4_COM_CLK_ENABLE1);
+ writel(0x06, edp->pll + QSERDES_V4_COM_SYSCLK_BUF_ENABLE);
+ writel(0x30, edp->pll + QSERDES_V4_COM_CLK_SELECT);
+ writel(hsclk_sel, edp->pll + QSERDES_V4_COM_HSCLK_SEL);
+ writel(0x0f, edp->pll + QSERDES_V4_COM_PLL_IVCO);
+ writel(0x08, edp->pll + QSERDES_V4_COM_LOCK_CMP_EN);
+ writel(0x36, edp->pll + QSERDES_V4_COM_PLL_CCTRL_MODE0);
+ writel(0x16, edp->pll + QSERDES_V4_COM_PLL_RCTRL_MODE0);
+ writel(0x06, edp->pll + QSERDES_V4_COM_CP_CTRL_MODE0);
+ writel(dec_start_mode0, edp->pll + QSERDES_V4_COM_DEC_START_MODE0);
+ writel(0x00, edp->pll + QSERDES_V4_COM_DIV_FRAC_START1_MODE0);
+ writel(div_frac_start2_mode0, edp->pll + QSERDES_V4_COM_DIV_FRAC_START2_MODE0);
+ writel(div_frac_start3_mode0, edp->pll + QSERDES_V4_COM_DIV_FRAC_START3_MODE0);
+ writel(0x02, edp->pll + QSERDES_V4_COM_CMN_CONFIG);
+ writel(0x3f, edp->pll + QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0);
+ writel(0x00, edp->pll + QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0);
+ writel(0x00, edp->pll + QSERDES_V4_COM_VCO_TUNE_MAP);
+ writel(lock_cmp1_mode0, edp->pll + QSERDES_V4_COM_LOCK_CMP1_MODE0);
+ writel(lock_cmp2_mode0, edp->pll + QSERDES_V4_COM_LOCK_CMP2_MODE0);
+
+ writel(0x0a, edp->pll + QSERDES_V4_COM_BG_TIMER);
+ writel(0x14, edp->pll + QSERDES_V4_COM_CORECLK_DIV_MODE0);
+ writel(0x00, edp->pll + QSERDES_V4_COM_VCO_TUNE_CTRL);
+ writel(0x17, edp->pll + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
+ writel(0x0f, edp->pll + QSERDES_V4_COM_CORE_CLK_EN);
+ writel(0xa0, edp->pll + QSERDES_V4_COM_VCO_TUNE1_MODE0);
+ writel(0x03, edp->pll + QSERDES_V4_COM_VCO_TUNE2_MODE0);
+
+ return 0;
+}
+
+static int qcom_edp_set_vco_div(const struct qcom_edp *edp, unsigned long *pixel_freq)
+{
+ const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
+ u32 vco_div;
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ vco_div = 0x1;
+ *pixel_freq = 1620000000UL / 2;
+ break;
+
+ case 2700:
+ vco_div = 0x1;
+ *pixel_freq = 2700000000UL / 2;
+ break;
+
+ case 5400:
+ vco_div = 0x2;
+ *pixel_freq = 5400000000UL / 4;
+ break;
+
+ case 8100:
+ vco_div = 0x0;
+ *pixel_freq = 8100000000UL / 6;
+ break;
+
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
+ }
+
+ writel(vco_div, edp->edp + DP_PHY_VCO_DIV);
+
+ return 0;
+}
+
+static int qcom_edp_phy_power_on(struct phy *phy)
+{
+ const struct qcom_edp *edp = phy_get_drvdata(phy);
+ const struct qcom_edp_cfg *cfg = edp->cfg;
+ u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
+ unsigned long pixel_freq;
+ u8 ldo_config;
+ int timeout;
+ int ret;
+ u32 val;
+ u8 cfg1;
+
+ writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_LANE_0_1_PWRDN | DP_PHY_PD_CTL_LANE_2_3_PWRDN |
+ DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
+ edp->edp + DP_PHY_PD_CTL);
+ writel(0xfc, edp->edp + DP_PHY_MODE);
+
+ timeout = readl_poll_timeout(edp->pll + QSERDES_V4_COM_CMN_STATUS,
+ val, val & BIT(7), 5, 200);
+ if (timeout)
+ return timeout;
+
+
+ ldo_config = (cfg && cfg->is_dp) ? 0x1 : 0x0;
+
+ writel(ldo_config, edp->tx0 + TXn_LDO_CONFIG);
+ writel(ldo_config, edp->tx1 + TXn_LDO_CONFIG);
+ writel(0x00, edp->tx0 + TXn_LANE_MODE_1);
+ writel(0x00, edp->tx1 + TXn_LANE_MODE_1);
+
+ if (edp->dp_opts.ssc) {
+ ret = qcom_edp_configure_ssc(edp);
+ if (ret)
+ return ret;
+ }
+
+ ret = qcom_edp_configure_pll(edp);
+ if (ret)
+ return ret;
+
+ /* TX Lane configuration */
+ writel(0x05, edp->edp + DP_PHY_TX0_TX1_LANE_CTL);
+ writel(0x05, edp->edp + DP_PHY_TX2_TX3_LANE_CTL);
+
+ /* TX-0 register configuration */
+ writel(0x03, edp->tx0 + TXn_TRANSCEIVER_BIAS_EN);
+ writel(0x0f, edp->tx0 + TXn_CLKBUF_ENABLE);
+ writel(0x03, edp->tx0 + TXn_RESET_TSYNC_EN);
+ writel(0x01, edp->tx0 + TXn_TRAN_DRVR_EMP_EN);
+ writel(0x04, edp->tx0 + TXn_TX_BAND);
+
+ /* TX-1 register configuration */
+ writel(0x03, edp->tx1 + TXn_TRANSCEIVER_BIAS_EN);
+ writel(0x0f, edp->tx1 + TXn_CLKBUF_ENABLE);
+ writel(0x03, edp->tx1 + TXn_RESET_TSYNC_EN);
+ writel(0x01, edp->tx1 + TXn_TRAN_DRVR_EMP_EN);
+ writel(0x04, edp->tx1 + TXn_TX_BAND);
+
+ ret = qcom_edp_set_vco_div(edp, &pixel_freq);
+ if (ret)
+ return ret;
+
+ writel(0x01, edp->edp + DP_PHY_CFG);
+ writel(0x05, edp->edp + DP_PHY_CFG);
+ writel(0x01, edp->edp + DP_PHY_CFG);
+ writel(0x09, edp->edp + DP_PHY_CFG);
+
+ writel(0x20, edp->pll + QSERDES_V4_COM_RESETSM_CNTRL);
+
+ timeout = readl_poll_timeout(edp->pll + QSERDES_V4_COM_C_READY_STATUS,
+ val, val & BIT(0), 500, 10000);
+ if (timeout)
+ return timeout;
+
+ writel(0x19, edp->edp + DP_PHY_CFG);
+ writel(0x1f, edp->tx0 + TXn_HIGHZ_DRVR_EN);
+ writel(0x04, edp->tx0 + TXn_HIGHZ_DRVR_EN);
+ writel(0x00, edp->tx0 + TXn_TX_POL_INV);
+ writel(0x1f, edp->tx1 + TXn_HIGHZ_DRVR_EN);
+ writel(0x04, edp->tx1 + TXn_HIGHZ_DRVR_EN);
+ writel(0x00, edp->tx1 + TXn_TX_POL_INV);
+ writel(0x10, edp->tx0 + TXn_TX_DRV_LVL_OFFSET);
+ writel(0x10, edp->tx1 + TXn_TX_DRV_LVL_OFFSET);
+ writel(0x11, edp->tx0 + TXn_RES_CODE_LANE_OFFSET_TX0);
+ writel(0x11, edp->tx0 + TXn_RES_CODE_LANE_OFFSET_TX1);
+ writel(0x11, edp->tx1 + TXn_RES_CODE_LANE_OFFSET_TX0);
+ writel(0x11, edp->tx1 + TXn_RES_CODE_LANE_OFFSET_TX1);
+
+ writel(0x10, edp->tx0 + TXn_TX_EMP_POST1_LVL);
+ writel(0x10, edp->tx1 + TXn_TX_EMP_POST1_LVL);
+ writel(0x1f, edp->tx0 + TXn_TX_DRV_LVL);
+ writel(0x1f, edp->tx1 + TXn_TX_DRV_LVL);
+
+ if (edp->dp_opts.lanes == 1) {
+ bias0_en = 0x01;
+ bias1_en = 0x00;
+ drvr0_en = 0x06;
+ drvr1_en = 0x07;
+ cfg1 = 0x1;
+ } else if (edp->dp_opts.lanes == 2) {
+ bias0_en = 0x03;
+ bias1_en = 0x00;
+ drvr0_en = 0x04;
+ drvr1_en = 0x07;
+ cfg1 = 0x3;
+ } else {
+ bias0_en = 0x03;
+ bias1_en = 0x03;
+ drvr0_en = 0x04;
+ drvr1_en = 0x04;
+ cfg1 = 0xf;
+ }
+
+ writel(drvr0_en, edp->tx0 + TXn_HIGHZ_DRVR_EN);
+ writel(bias0_en, edp->tx0 + TXn_TRANSCEIVER_BIAS_EN);
+ writel(drvr1_en, edp->tx1 + TXn_HIGHZ_DRVR_EN);
+ writel(bias1_en, edp->tx1 + TXn_TRANSCEIVER_BIAS_EN);
+ writel(cfg1, edp->edp + DP_PHY_CFG_1);
+
+ writel(0x18, edp->edp + DP_PHY_CFG);
+ usleep_range(100, 1000);
+
+ writel(0x19, edp->edp + DP_PHY_CFG);
+
+ ret = readl_poll_timeout(edp->edp + DP_PHY_STATUS,
+ val, val & BIT(1), 500, 10000);
+ if (ret)
+ return ret;
+
+ clk_set_rate(edp->dp_link_hw.clk, edp->dp_opts.link_rate * 100000);
+ clk_set_rate(edp->dp_pixel_hw.clk, pixel_freq);
+
+ return 0;
+}
+
+static int qcom_edp_phy_power_off(struct phy *phy)
+{
+ const struct qcom_edp *edp = phy_get_drvdata(phy);
+
+ writel(DP_PHY_PD_CTL_PSR_PWRDN, edp->edp + DP_PHY_PD_CTL);
+
+ return 0;
+}
+
+static int qcom_edp_phy_exit(struct phy *phy)
+{
+ struct qcom_edp *edp = phy_get_drvdata(phy);
+
+ clk_bulk_disable_unprepare(ARRAY_SIZE(edp->clks), edp->clks);
+ regulator_bulk_disable(ARRAY_SIZE(edp->supplies), edp->supplies);
+
+ return 0;
+}
+
+static const struct phy_ops qcom_edp_ops = {
+ .init = qcom_edp_phy_init,
+ .configure = qcom_edp_phy_configure,
+ .power_on = qcom_edp_phy_power_on,
+ .power_off = qcom_edp_phy_power_off,
+ .exit = qcom_edp_phy_exit,
+ .owner = THIS_MODULE,
+};
+
+/*
+ * Embedded Display Port PLL driver block diagram for branch clocks
+ *
+ * +------------------------------+
+ * | EDP_VCO_CLK |
+ * | |
+ * | +-------------------+ |
+ * | | (EDP PLL/VCO) | |
+ * | +---------+---------+ |
+ * | v |
+ * | +----------+-----------+ |
+ * | | hsclk_divsel_clk_src | |
+ * | +----------+-----------+ |
+ * +------------------------------+
+ * |
+ * +---------<---------v------------>----------+
+ * | |
+ * +--------v----------------+ |
+ * | edp_phy_pll_link_clk | |
+ * | link_clk | |
+ * +--------+----------------+ |
+ * | |
+ * | |
+ * v v
+ * Input to DISPCC block |
+ * for link clk, crypto clk |
+ * and interface clock |
+ * |
+ * |
+ * +--------<------------+-----------------+---<---+
+ * | | |
+ * +----v---------+ +--------v-----+ +--------v------+
+ * | vco_divided | | vco_divided | | vco_divided |
+ * | _clk_src | | _clk_src | | _clk_src |
+ * | | | | | |
+ * |divsel_six | | divsel_two | | divsel_four |
+ * +-------+------+ +-----+--------+ +--------+------+
+ * | | |
+ * v---->----------v-------------<------v
+ * |
+ * +----------+-----------------+
+ * | edp_phy_pll_vco_div_clk |
+ * +---------+------------------+
+ * |
+ * v
+ * Input to DISPCC block
+ * for EDP pixel clock
+ *
+ */
+static int qcom_edp_dp_pixel_clk_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ switch (req->rate) {
+ case 1620000000UL / 2:
+ case 2700000000UL / 2:
+ /* 5.4 and 8.1 GHz are same link rate as 2.7GHz, i.e. div 4 and div 6 */
+ return 0;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static unsigned long
+qcom_edp_dp_pixel_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ const struct qcom_edp *edp = container_of(hw, struct qcom_edp, dp_pixel_hw);
+ const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ return 1620000000UL / 2;
+ case 2700:
+ return 2700000000UL / 2;
+ case 5400:
+ return 5400000000UL / 4;
+ case 8100:
+ return 8100000000UL / 6;
+ default:
+ return 0;
+ }
+}
+
+static const struct clk_ops qcom_edp_dp_pixel_clk_ops = {
+ .determine_rate = qcom_edp_dp_pixel_clk_determine_rate,
+ .recalc_rate = qcom_edp_dp_pixel_clk_recalc_rate,
+};
+
+static int qcom_edp_dp_link_clk_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ switch (req->rate) {
+ case 162000000:
+ case 270000000:
+ case 540000000:
+ case 810000000:
+ return 0;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static unsigned long
+qcom_edp_dp_link_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ const struct qcom_edp *edp = container_of(hw, struct qcom_edp, dp_link_hw);
+ const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ case 2700:
+ case 5400:
+ case 8100:
+ return dp_opts->link_rate * 100000;
+
+ default:
+ return 0;
+ }
+}
+
+static const struct clk_ops qcom_edp_dp_link_clk_ops = {
+ .determine_rate = qcom_edp_dp_link_clk_determine_rate,
+ .recalc_rate = qcom_edp_dp_link_clk_recalc_rate,
+};
+
+static int qcom_edp_clks_register(struct qcom_edp *edp, struct device_node *np)
+{
+ struct clk_hw_onecell_data *data;
+ struct clk_init_data init = { };
+ char name[64];
+ int ret;
+
+ data = devm_kzalloc(edp->dev, struct_size(data, hws, 2), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ snprintf(name, sizeof(name), "%s::link_clk", dev_name(edp->dev));
+ init.ops = &qcom_edp_dp_link_clk_ops;
+ init.name = name;
+ edp->dp_link_hw.init = &init;
+ ret = devm_clk_hw_register(edp->dev, &edp->dp_link_hw);
+ if (ret)
+ return ret;
+
+ snprintf(name, sizeof(name), "%s::vco_div_clk", dev_name(edp->dev));
+ init.ops = &qcom_edp_dp_pixel_clk_ops;
+ init.name = name;
+ edp->dp_pixel_hw.init = &init;
+ ret = devm_clk_hw_register(edp->dev, &edp->dp_pixel_hw);
+ if (ret)
+ return ret;
+
+ data->hws[0] = &edp->dp_link_hw;
+ data->hws[1] = &edp->dp_pixel_hw;
+ data->num = 2;
+
+ return devm_of_clk_add_hw_provider(edp->dev, of_clk_hw_onecell_get, data);
+}
+
+static int qcom_edp_phy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct device *dev = &pdev->dev;
+ struct qcom_edp *edp;
+ int ret;
+
+ edp = devm_kzalloc(dev, sizeof(*edp), GFP_KERNEL);
+ if (!edp)
+ return -ENOMEM;
+
+ edp->dev = dev;
+ edp->cfg = of_device_get_match_data(&pdev->dev);
+
+ edp->edp = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(edp->edp))
+ return PTR_ERR(edp->edp);
+
+ edp->tx0 = devm_platform_ioremap_resource(pdev, 1);
+ if (IS_ERR(edp->tx0))
+ return PTR_ERR(edp->tx0);
+
+ edp->tx1 = devm_platform_ioremap_resource(pdev, 2);
+ if (IS_ERR(edp->tx1))
+ return PTR_ERR(edp->tx1);
+
+ edp->pll = devm_platform_ioremap_resource(pdev, 3);
+ if (IS_ERR(edp->pll))
+ return PTR_ERR(edp->pll);
+
+ edp->clks[0].id = "aux";
+ edp->clks[1].id = "cfg_ahb";
+ ret = devm_clk_bulk_get(dev, ARRAY_SIZE(edp->clks), edp->clks);
+ if (ret)
+ return ret;
+
+ edp->supplies[0].supply = "vdda-phy";
+ edp->supplies[1].supply = "vdda-pll";
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(edp->supplies), edp->supplies);
+ if (ret)
+ return ret;
+
+ ret = regulator_set_load(edp->supplies[0].consumer, 21800); /* 1.2 V vdda-phy */
+ if (ret) {
+ dev_err(dev, "failed to set load at %s\n", edp->supplies[0].supply);
+ return ret;
+ }
+
+ ret = regulator_set_load(edp->supplies[1].consumer, 36000); /* 0.9 V vdda-pll */
+ if (ret) {
+ dev_err(dev, "failed to set load at %s\n", edp->supplies[1].supply);
+ return ret;
+ }
+
+ ret = qcom_edp_clks_register(edp, pdev->dev.of_node);
+ if (ret)
+ return ret;
+
+ edp->phy = devm_phy_create(dev, pdev->dev.of_node, &qcom_edp_ops);
+ if (IS_ERR(edp->phy)) {
+ dev_err(dev, "failed to register phy\n");
+ return PTR_ERR(edp->phy);
+ }
+
+ phy_set_drvdata(edp->phy, edp);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id qcom_edp_phy_match_table[] = {
+ { .compatible = "qcom,sc7280-edp-phy" },
+ { .compatible = "qcom,sc8180x-edp-phy" },
+ { .compatible = "qcom,sc8280xp-dp-phy", .data = &dp_phy_cfg },
+ { .compatible = "qcom,sc8280xp-edp-phy", .data = &edp_phy_cfg },
+ { }
+};
+MODULE_DEVICE_TABLE(of, qcom_edp_phy_match_table);
+
+static struct platform_driver qcom_edp_phy_driver = {
+ .probe = qcom_edp_phy_probe,
+ .driver = {
+ .name = "qcom-edp-phy",
+ .of_match_table = qcom_edp_phy_match_table,
+ },
+};
+
+module_platform_driver(qcom_edp_phy_driver);
+
+MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@linaro.org>");
+MODULE_DESCRIPTION("Qualcomm eDP QMP PHY driver");
+MODULE_LICENSE("GPL v2");