summaryrefslogtreecommitdiffstats
path: root/drivers/phy/renesas
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/phy/renesas')
-rw-r--r--drivers/phy/renesas/Kconfig34
-rw-r--r--drivers/phy/renesas/Makefile5
-rw-r--r--drivers/phy/renesas/phy-rcar-gen2.c443
-rw-r--r--drivers/phy/renesas/phy-rcar-gen3-pcie.c149
-rw-r--r--drivers/phy/renesas/phy-rcar-gen3-usb2.c782
-rw-r--r--drivers/phy/renesas/phy-rcar-gen3-usb3.c221
6 files changed, 1634 insertions, 0 deletions
diff --git a/drivers/phy/renesas/Kconfig b/drivers/phy/renesas/Kconfig
new file mode 100644
index 000000000..111bdcae7
--- /dev/null
+++ b/drivers/phy/renesas/Kconfig
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Phy drivers for Renesas platforms
+#
+config PHY_RCAR_GEN2
+ tristate "Renesas R-Car generation 2 USB PHY driver"
+ depends on ARCH_RENESAS
+ depends on GENERIC_PHY
+ help
+ Support for USB PHY found on Renesas R-Car generation 2 SoCs.
+
+config PHY_RCAR_GEN3_PCIE
+ tristate "Renesas R-Car generation 3 PCIe PHY driver"
+ depends on ARCH_RENESAS
+ select GENERIC_PHY
+ help
+ Support for the PCIe PHY found on Renesas R-Car generation 3 SoCs.
+
+config PHY_RCAR_GEN3_USB2
+ tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
+ depends on ARCH_RENESAS
+ depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
+ depends on USB_SUPPORT
+ select GENERIC_PHY
+ select USB_COMMON
+ help
+ Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
+
+config PHY_RCAR_GEN3_USB3
+ tristate "Renesas R-Car generation 3 USB 3.0 PHY driver"
+ depends on ARCH_RENESAS || COMPILE_TEST
+ select GENERIC_PHY
+ help
+ Support for USB 3.0 PHY found on Renesas R-Car generation 3 SoCs.
diff --git a/drivers/phy/renesas/Makefile b/drivers/phy/renesas/Makefile
new file mode 100644
index 000000000..b599ff8a4
--- /dev/null
+++ b/drivers/phy/renesas/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o
+obj-$(CONFIG_PHY_RCAR_GEN3_PCIE) += phy-rcar-gen3-pcie.o
+obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o
+obj-$(CONFIG_PHY_RCAR_GEN3_USB3) += phy-rcar-gen3-usb3.o
diff --git a/drivers/phy/renesas/phy-rcar-gen2.c b/drivers/phy/renesas/phy-rcar-gen2.c
new file mode 100644
index 000000000..c375a4676
--- /dev/null
+++ b/drivers/phy/renesas/phy-rcar-gen2.c
@@ -0,0 +1,443 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas R-Car Gen2 PHY driver
+ *
+ * Copyright (C) 2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded, Inc.
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/atomic.h>
+#include <linux/of_device.h>
+
+#define USBHS_LPSTS 0x02
+#define USBHS_UGCTRL 0x80
+#define USBHS_UGCTRL2 0x84
+#define USBHS_UGSTS 0x88 /* From technical update */
+
+/* Low Power Status register (LPSTS) */
+#define USBHS_LPSTS_SUSPM 0x4000
+
+/* USB General control register (UGCTRL) */
+#define USBHS_UGCTRL_CONNECT 0x00000004
+#define USBHS_UGCTRL_PLLRESET 0x00000001
+
+/* USB General control register 2 (UGCTRL2) */
+#define USBHS_UGCTRL2_USB2SEL 0x80000000
+#define USBHS_UGCTRL2_USB2SEL_PCI 0x00000000
+#define USBHS_UGCTRL2_USB2SEL_USB30 0x80000000
+#define USBHS_UGCTRL2_USB0SEL 0x00000030
+#define USBHS_UGCTRL2_USB0SEL_PCI 0x00000010
+#define USBHS_UGCTRL2_USB0SEL_HS_USB 0x00000030
+#define USBHS_UGCTRL2_USB0SEL_USB20 0x00000010
+#define USBHS_UGCTRL2_USB0SEL_HS_USB20 0x00000020
+
+/* USB General status register (UGSTS) */
+#define USBHS_UGSTS_LOCK 0x00000100 /* From technical update */
+
+#define PHYS_PER_CHANNEL 2
+
+struct rcar_gen2_phy {
+ struct phy *phy;
+ struct rcar_gen2_channel *channel;
+ int number;
+ u32 select_value;
+};
+
+struct rcar_gen2_channel {
+ struct device_node *of_node;
+ struct rcar_gen2_phy_driver *drv;
+ struct rcar_gen2_phy phys[PHYS_PER_CHANNEL];
+ int selected_phy;
+ u32 select_mask;
+};
+
+struct rcar_gen2_phy_driver {
+ void __iomem *base;
+ struct clk *clk;
+ spinlock_t lock;
+ int num_channels;
+ struct rcar_gen2_channel *channels;
+};
+
+struct rcar_gen2_phy_data {
+ const struct phy_ops *gen2_phy_ops;
+ const u32 (*select_value)[PHYS_PER_CHANNEL];
+ const u32 num_channels;
+};
+
+static int rcar_gen2_phy_init(struct phy *p)
+{
+ struct rcar_gen2_phy *phy = phy_get_drvdata(p);
+ struct rcar_gen2_channel *channel = phy->channel;
+ struct rcar_gen2_phy_driver *drv = channel->drv;
+ unsigned long flags;
+ u32 ugctrl2;
+
+ /*
+ * Try to acquire exclusive access to PHY. The first driver calling
+ * phy_init() on a given channel wins, and all attempts to use another
+ * PHY on this channel will fail until phy_exit() is called by the first
+ * driver. Achieving this with cmpxcgh() should be SMP-safe.
+ */
+ if (cmpxchg(&channel->selected_phy, -1, phy->number) != -1)
+ return -EBUSY;
+
+ clk_prepare_enable(drv->clk);
+
+ spin_lock_irqsave(&drv->lock, flags);
+ ugctrl2 = readl(drv->base + USBHS_UGCTRL2);
+ ugctrl2 &= ~channel->select_mask;
+ ugctrl2 |= phy->select_value;
+ writel(ugctrl2, drv->base + USBHS_UGCTRL2);
+ spin_unlock_irqrestore(&drv->lock, flags);
+ return 0;
+}
+
+static int rcar_gen2_phy_exit(struct phy *p)
+{
+ struct rcar_gen2_phy *phy = phy_get_drvdata(p);
+ struct rcar_gen2_channel *channel = phy->channel;
+
+ clk_disable_unprepare(channel->drv->clk);
+
+ channel->selected_phy = -1;
+
+ return 0;
+}
+
+static int rcar_gen2_phy_power_on(struct phy *p)
+{
+ struct rcar_gen2_phy *phy = phy_get_drvdata(p);
+ struct rcar_gen2_phy_driver *drv = phy->channel->drv;
+ void __iomem *base = drv->base;
+ unsigned long flags;
+ u32 value;
+ int err = 0, i;
+
+ /* Skip if it's not USBHS */
+ if (phy->select_value != USBHS_UGCTRL2_USB0SEL_HS_USB)
+ return 0;
+
+ spin_lock_irqsave(&drv->lock, flags);
+
+ /* Power on USBHS PHY */
+ value = readl(base + USBHS_UGCTRL);
+ value &= ~USBHS_UGCTRL_PLLRESET;
+ writel(value, base + USBHS_UGCTRL);
+
+ value = readw(base + USBHS_LPSTS);
+ value |= USBHS_LPSTS_SUSPM;
+ writew(value, base + USBHS_LPSTS);
+
+ for (i = 0; i < 20; i++) {
+ value = readl(base + USBHS_UGSTS);
+ if ((value & USBHS_UGSTS_LOCK) == USBHS_UGSTS_LOCK) {
+ value = readl(base + USBHS_UGCTRL);
+ value |= USBHS_UGCTRL_CONNECT;
+ writel(value, base + USBHS_UGCTRL);
+ goto out;
+ }
+ udelay(1);
+ }
+
+ /* Timed out waiting for the PLL lock */
+ err = -ETIMEDOUT;
+
+out:
+ spin_unlock_irqrestore(&drv->lock, flags);
+
+ return err;
+}
+
+static int rcar_gen2_phy_power_off(struct phy *p)
+{
+ struct rcar_gen2_phy *phy = phy_get_drvdata(p);
+ struct rcar_gen2_phy_driver *drv = phy->channel->drv;
+ void __iomem *base = drv->base;
+ unsigned long flags;
+ u32 value;
+
+ /* Skip if it's not USBHS */
+ if (phy->select_value != USBHS_UGCTRL2_USB0SEL_HS_USB)
+ return 0;
+
+ spin_lock_irqsave(&drv->lock, flags);
+
+ /* Power off USBHS PHY */
+ value = readl(base + USBHS_UGCTRL);
+ value &= ~USBHS_UGCTRL_CONNECT;
+ writel(value, base + USBHS_UGCTRL);
+
+ value = readw(base + USBHS_LPSTS);
+ value &= ~USBHS_LPSTS_SUSPM;
+ writew(value, base + USBHS_LPSTS);
+
+ value = readl(base + USBHS_UGCTRL);
+ value |= USBHS_UGCTRL_PLLRESET;
+ writel(value, base + USBHS_UGCTRL);
+
+ spin_unlock_irqrestore(&drv->lock, flags);
+
+ return 0;
+}
+
+static int rz_g1c_phy_power_on(struct phy *p)
+{
+ struct rcar_gen2_phy *phy = phy_get_drvdata(p);
+ struct rcar_gen2_phy_driver *drv = phy->channel->drv;
+ void __iomem *base = drv->base;
+ unsigned long flags;
+ u32 value;
+
+ spin_lock_irqsave(&drv->lock, flags);
+
+ /* Power on USBHS PHY */
+ value = readl(base + USBHS_UGCTRL);
+ value &= ~USBHS_UGCTRL_PLLRESET;
+ writel(value, base + USBHS_UGCTRL);
+
+ /* As per the data sheet wait 340 micro sec for power stable */
+ udelay(340);
+
+ if (phy->select_value == USBHS_UGCTRL2_USB0SEL_HS_USB20) {
+ value = readw(base + USBHS_LPSTS);
+ value |= USBHS_LPSTS_SUSPM;
+ writew(value, base + USBHS_LPSTS);
+ }
+
+ spin_unlock_irqrestore(&drv->lock, flags);
+
+ return 0;
+}
+
+static int rz_g1c_phy_power_off(struct phy *p)
+{
+ struct rcar_gen2_phy *phy = phy_get_drvdata(p);
+ struct rcar_gen2_phy_driver *drv = phy->channel->drv;
+ void __iomem *base = drv->base;
+ unsigned long flags;
+ u32 value;
+
+ spin_lock_irqsave(&drv->lock, flags);
+ /* Power off USBHS PHY */
+ if (phy->select_value == USBHS_UGCTRL2_USB0SEL_HS_USB20) {
+ value = readw(base + USBHS_LPSTS);
+ value &= ~USBHS_LPSTS_SUSPM;
+ writew(value, base + USBHS_LPSTS);
+ }
+
+ value = readl(base + USBHS_UGCTRL);
+ value |= USBHS_UGCTRL_PLLRESET;
+ writel(value, base + USBHS_UGCTRL);
+
+ spin_unlock_irqrestore(&drv->lock, flags);
+
+ return 0;
+}
+
+static const struct phy_ops rcar_gen2_phy_ops = {
+ .init = rcar_gen2_phy_init,
+ .exit = rcar_gen2_phy_exit,
+ .power_on = rcar_gen2_phy_power_on,
+ .power_off = rcar_gen2_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static const struct phy_ops rz_g1c_phy_ops = {
+ .init = rcar_gen2_phy_init,
+ .exit = rcar_gen2_phy_exit,
+ .power_on = rz_g1c_phy_power_on,
+ .power_off = rz_g1c_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static const u32 pci_select_value[][PHYS_PER_CHANNEL] = {
+ [0] = { USBHS_UGCTRL2_USB0SEL_PCI, USBHS_UGCTRL2_USB0SEL_HS_USB },
+ [2] = { USBHS_UGCTRL2_USB2SEL_PCI, USBHS_UGCTRL2_USB2SEL_USB30 },
+};
+
+static const u32 usb20_select_value[][PHYS_PER_CHANNEL] = {
+ { USBHS_UGCTRL2_USB0SEL_USB20, USBHS_UGCTRL2_USB0SEL_HS_USB20 },
+};
+
+static const struct rcar_gen2_phy_data rcar_gen2_usb_phy_data = {
+ .gen2_phy_ops = &rcar_gen2_phy_ops,
+ .select_value = pci_select_value,
+ .num_channels = ARRAY_SIZE(pci_select_value),
+};
+
+static const struct rcar_gen2_phy_data rz_g1c_usb_phy_data = {
+ .gen2_phy_ops = &rz_g1c_phy_ops,
+ .select_value = usb20_select_value,
+ .num_channels = ARRAY_SIZE(usb20_select_value),
+};
+
+static const struct of_device_id rcar_gen2_phy_match_table[] = {
+ {
+ .compatible = "renesas,usb-phy-r8a77470",
+ .data = &rz_g1c_usb_phy_data,
+ },
+ {
+ .compatible = "renesas,usb-phy-r8a7790",
+ .data = &rcar_gen2_usb_phy_data,
+ },
+ {
+ .compatible = "renesas,usb-phy-r8a7791",
+ .data = &rcar_gen2_usb_phy_data,
+ },
+ {
+ .compatible = "renesas,usb-phy-r8a7794",
+ .data = &rcar_gen2_usb_phy_data,
+ },
+ {
+ .compatible = "renesas,rcar-gen2-usb-phy",
+ .data = &rcar_gen2_usb_phy_data,
+ },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, rcar_gen2_phy_match_table);
+
+static struct phy *rcar_gen2_phy_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct rcar_gen2_phy_driver *drv;
+ struct device_node *np = args->np;
+ int i;
+
+ drv = dev_get_drvdata(dev);
+ if (!drv)
+ return ERR_PTR(-EINVAL);
+
+ for (i = 0; i < drv->num_channels; i++) {
+ if (np == drv->channels[i].of_node)
+ break;
+ }
+
+ if (i >= drv->num_channels || args->args[0] >= 2)
+ return ERR_PTR(-ENODEV);
+
+ return drv->channels[i].phys[args->args[0]].phy;
+}
+
+static const u32 select_mask[] = {
+ [0] = USBHS_UGCTRL2_USB0SEL,
+ [2] = USBHS_UGCTRL2_USB2SEL,
+};
+
+static int rcar_gen2_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct rcar_gen2_phy_driver *drv;
+ struct phy_provider *provider;
+ struct device_node *np;
+ void __iomem *base;
+ struct clk *clk;
+ const struct rcar_gen2_phy_data *data;
+ int i = 0;
+
+ if (!dev->of_node) {
+ dev_err(dev,
+ "This driver is required to be instantiated from device tree\n");
+ return -EINVAL;
+ }
+
+ clk = devm_clk_get(dev, "usbhs");
+ if (IS_ERR(clk)) {
+ dev_err(dev, "Can't get USBHS clock\n");
+ return PTR_ERR(clk);
+ }
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL);
+ if (!drv)
+ return -ENOMEM;
+
+ spin_lock_init(&drv->lock);
+
+ drv->clk = clk;
+ drv->base = base;
+
+ data = of_device_get_match_data(dev);
+ if (!data)
+ return -EINVAL;
+
+ drv->num_channels = of_get_child_count(dev->of_node);
+ drv->channels = devm_kcalloc(dev, drv->num_channels,
+ sizeof(struct rcar_gen2_channel),
+ GFP_KERNEL);
+ if (!drv->channels)
+ return -ENOMEM;
+
+ for_each_child_of_node(dev->of_node, np) {
+ struct rcar_gen2_channel *channel = drv->channels + i;
+ u32 channel_num;
+ int error, n;
+
+ channel->of_node = np;
+ channel->drv = drv;
+ channel->selected_phy = -1;
+
+ error = of_property_read_u32(np, "reg", &channel_num);
+ if (error || channel_num >= data->num_channels) {
+ dev_err(dev, "Invalid \"reg\" property\n");
+ of_node_put(np);
+ return error;
+ }
+ channel->select_mask = select_mask[channel_num];
+
+ for (n = 0; n < PHYS_PER_CHANNEL; n++) {
+ struct rcar_gen2_phy *phy = &channel->phys[n];
+
+ phy->channel = channel;
+ phy->number = n;
+ phy->select_value = data->select_value[channel_num][n];
+
+ phy->phy = devm_phy_create(dev, NULL,
+ data->gen2_phy_ops);
+ if (IS_ERR(phy->phy)) {
+ dev_err(dev, "Failed to create PHY\n");
+ of_node_put(np);
+ return PTR_ERR(phy->phy);
+ }
+ phy_set_drvdata(phy->phy, phy);
+ }
+
+ i++;
+ }
+
+ provider = devm_of_phy_provider_register(dev, rcar_gen2_phy_xlate);
+ if (IS_ERR(provider)) {
+ dev_err(dev, "Failed to register PHY provider\n");
+ return PTR_ERR(provider);
+ }
+
+ dev_set_drvdata(dev, drv);
+
+ return 0;
+}
+
+static struct platform_driver rcar_gen2_phy_driver = {
+ .driver = {
+ .name = "phy_rcar_gen2",
+ .of_match_table = rcar_gen2_phy_match_table,
+ },
+ .probe = rcar_gen2_phy_probe,
+};
+
+module_platform_driver(rcar_gen2_phy_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Renesas R-Car Gen2 PHY");
+MODULE_AUTHOR("Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>");
diff --git a/drivers/phy/renesas/phy-rcar-gen3-pcie.c b/drivers/phy/renesas/phy-rcar-gen3-pcie.c
new file mode 100644
index 000000000..4dc721eb9
--- /dev/null
+++ b/drivers/phy/renesas/phy-rcar-gen3-pcie.c
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas R-Car Gen3 PCIe PHY driver
+ *
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#define PHY_CTRL 0x4000 /* R8A77980 only */
+
+/* PHY control register (PHY_CTRL) */
+#define PHY_CTRL_PHY_PWDN BIT(2)
+
+struct rcar_gen3_phy {
+ struct phy *phy;
+ spinlock_t lock;
+ void __iomem *base;
+};
+
+static void rcar_gen3_phy_pcie_modify_reg(struct phy *p, unsigned int reg,
+ u32 clear, u32 set)
+{
+ struct rcar_gen3_phy *phy = phy_get_drvdata(p);
+ void __iomem *base = phy->base;
+ unsigned long flags;
+ u32 value;
+
+ spin_lock_irqsave(&phy->lock, flags);
+
+ value = readl(base + reg);
+ value &= ~clear;
+ value |= set;
+ writel(value, base + reg);
+
+ spin_unlock_irqrestore(&phy->lock, flags);
+}
+
+static int r8a77980_phy_pcie_power_on(struct phy *p)
+{
+ /* Power on the PCIe PHY */
+ rcar_gen3_phy_pcie_modify_reg(p, PHY_CTRL, PHY_CTRL_PHY_PWDN, 0);
+
+ return 0;
+}
+
+static int r8a77980_phy_pcie_power_off(struct phy *p)
+{
+ /* Power off the PCIe PHY */
+ rcar_gen3_phy_pcie_modify_reg(p, PHY_CTRL, 0, PHY_CTRL_PHY_PWDN);
+
+ return 0;
+}
+
+static const struct phy_ops r8a77980_phy_pcie_ops = {
+ .power_on = r8a77980_phy_pcie_power_on,
+ .power_off = r8a77980_phy_pcie_power_off,
+ .owner = THIS_MODULE,
+};
+
+static const struct of_device_id rcar_gen3_phy_pcie_match_table[] = {
+ { .compatible = "renesas,r8a77980-pcie-phy" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, rcar_gen3_phy_pcie_match_table);
+
+static int rcar_gen3_phy_pcie_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct phy_provider *provider;
+ struct rcar_gen3_phy *phy;
+ void __iomem *base;
+ int error;
+
+ if (!dev->of_node) {
+ dev_err(dev,
+ "This driver must only be instantiated from the device tree\n");
+ return -EINVAL;
+ }
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ spin_lock_init(&phy->lock);
+
+ phy->base = base;
+
+ /*
+ * devm_phy_create() will call pm_runtime_enable(&phy->dev);
+ * And then, phy-core will manage runtime PM for this device.
+ */
+ pm_runtime_enable(dev);
+
+ phy->phy = devm_phy_create(dev, NULL, &r8a77980_phy_pcie_ops);
+ if (IS_ERR(phy->phy)) {
+ dev_err(dev, "Failed to create PCIe PHY\n");
+ error = PTR_ERR(phy->phy);
+ goto error;
+ }
+ phy_set_drvdata(phy->phy, phy);
+
+ provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(provider)) {
+ dev_err(dev, "Failed to register PHY provider\n");
+ error = PTR_ERR(provider);
+ goto error;
+ }
+
+ return 0;
+
+error:
+ pm_runtime_disable(dev);
+
+ return error;
+}
+
+static int rcar_gen3_phy_pcie_remove(struct platform_device *pdev)
+{
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+};
+
+static struct platform_driver rcar_gen3_phy_driver = {
+ .driver = {
+ .name = "phy_rcar_gen3_pcie",
+ .of_match_table = rcar_gen3_phy_pcie_match_table,
+ },
+ .probe = rcar_gen3_phy_pcie_probe,
+ .remove = rcar_gen3_phy_pcie_remove,
+};
+
+module_platform_driver(rcar_gen3_phy_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Renesas R-Car Gen3 PCIe PHY");
+MODULE_AUTHOR("Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>");
diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
new file mode 100644
index 000000000..9de617ca9
--- /dev/null
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -0,0 +1,782 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas R-Car Gen3 for USB2.0 PHY driver
+ *
+ * Copyright (C) 2015-2017 Renesas Electronics Corporation
+ *
+ * This is based on the phy-rcar-gen2 driver:
+ * Copyright (C) 2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded, Inc.
+ */
+
+#include <linux/extcon-provider.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/string.h>
+#include <linux/usb/of.h>
+#include <linux/workqueue.h>
+
+/******* USB2.0 Host registers (original offset is +0x200) *******/
+#define USB2_INT_ENABLE 0x000
+#define USB2_USBCTR 0x00c
+#define USB2_SPD_RSM_TIMSET 0x10c
+#define USB2_OC_TIMSET 0x110
+#define USB2_COMMCTRL 0x600
+#define USB2_OBINTSTA 0x604
+#define USB2_OBINTEN 0x608
+#define USB2_VBCTRL 0x60c
+#define USB2_LINECTRL1 0x610
+#define USB2_ADPCTRL 0x630
+
+/* INT_ENABLE */
+#define USB2_INT_ENABLE_UCOM_INTEN BIT(3)
+#define USB2_INT_ENABLE_USBH_INTB_EN BIT(2) /* For EHCI */
+#define USB2_INT_ENABLE_USBH_INTA_EN BIT(1) /* For OHCI */
+
+/* USBCTR */
+#define USB2_USBCTR_DIRPD BIT(2)
+#define USB2_USBCTR_PLL_RST BIT(1)
+
+/* SPD_RSM_TIMSET */
+#define USB2_SPD_RSM_TIMSET_INIT 0x014e029b
+
+/* OC_TIMSET */
+#define USB2_OC_TIMSET_INIT 0x000209ab
+
+/* COMMCTRL */
+#define USB2_COMMCTRL_OTG_PERI BIT(31) /* 1 = Peripheral mode */
+
+/* OBINTSTA and OBINTEN */
+#define USB2_OBINT_SESSVLDCHG BIT(12)
+#define USB2_OBINT_IDDIGCHG BIT(11)
+#define USB2_OBINT_BITS (USB2_OBINT_SESSVLDCHG | \
+ USB2_OBINT_IDDIGCHG)
+
+/* VBCTRL */
+#define USB2_VBCTRL_OCCLREN BIT(16)
+#define USB2_VBCTRL_DRVVBUSSEL BIT(8)
+#define USB2_VBCTRL_VBOUT BIT(0)
+
+/* LINECTRL1 */
+#define USB2_LINECTRL1_DPRPD_EN BIT(19)
+#define USB2_LINECTRL1_DP_RPD BIT(18)
+#define USB2_LINECTRL1_DMRPD_EN BIT(17)
+#define USB2_LINECTRL1_DM_RPD BIT(16)
+#define USB2_LINECTRL1_OPMODE_NODRV BIT(6)
+
+/* ADPCTRL */
+#define USB2_ADPCTRL_OTGSESSVLD BIT(20)
+#define USB2_ADPCTRL_IDDIG BIT(19)
+#define USB2_ADPCTRL_IDPULLUP BIT(5) /* 1 = ID sampling is enabled */
+#define USB2_ADPCTRL_DRVVBUS BIT(4)
+
+/* RZ/G2L specific */
+#define USB2_OBINT_IDCHG_EN BIT(0)
+#define USB2_LINECTRL1_USB2_IDMON BIT(0)
+
+#define NUM_OF_PHYS 4
+enum rcar_gen3_phy_index {
+ PHY_INDEX_BOTH_HC,
+ PHY_INDEX_OHCI,
+ PHY_INDEX_EHCI,
+ PHY_INDEX_HSUSB
+};
+
+static const u32 rcar_gen3_int_enable[NUM_OF_PHYS] = {
+ USB2_INT_ENABLE_USBH_INTB_EN | USB2_INT_ENABLE_USBH_INTA_EN,
+ USB2_INT_ENABLE_USBH_INTA_EN,
+ USB2_INT_ENABLE_USBH_INTB_EN,
+ 0
+};
+
+struct rcar_gen3_phy {
+ struct phy *phy;
+ struct rcar_gen3_chan *ch;
+ u32 int_enable_bits;
+ bool initialized;
+ bool otg_initialized;
+ bool powered;
+};
+
+struct rcar_gen3_chan {
+ void __iomem *base;
+ struct device *dev; /* platform_device's device */
+ struct extcon_dev *extcon;
+ struct rcar_gen3_phy rphys[NUM_OF_PHYS];
+ struct regulator *vbus;
+ struct work_struct work;
+ struct mutex lock; /* protects rphys[...].powered */
+ enum usb_dr_mode dr_mode;
+ int irq;
+ u32 obint_enable_bits;
+ bool extcon_host;
+ bool is_otg_channel;
+ bool uses_otg_pins;
+ bool soc_no_adp_ctrl;
+};
+
+struct rcar_gen3_phy_drv_data {
+ const struct phy_ops *phy_usb2_ops;
+ bool no_adp_ctrl;
+};
+
+/*
+ * Combination about is_otg_channel and uses_otg_pins:
+ *
+ * Parameters || Behaviors
+ * is_otg_channel | uses_otg_pins || irqs | role sysfs
+ * ---------------------+---------------++--------------+------------
+ * true | true || enabled | enabled
+ * true | false || disabled | enabled
+ * false | any || disabled | disabled
+ */
+
+static void rcar_gen3_phy_usb2_work(struct work_struct *work)
+{
+ struct rcar_gen3_chan *ch = container_of(work, struct rcar_gen3_chan,
+ work);
+
+ if (ch->extcon_host) {
+ extcon_set_state_sync(ch->extcon, EXTCON_USB_HOST, true);
+ extcon_set_state_sync(ch->extcon, EXTCON_USB, false);
+ } else {
+ extcon_set_state_sync(ch->extcon, EXTCON_USB_HOST, false);
+ extcon_set_state_sync(ch->extcon, EXTCON_USB, true);
+ }
+}
+
+static void rcar_gen3_set_host_mode(struct rcar_gen3_chan *ch, int host)
+{
+ void __iomem *usb2_base = ch->base;
+ u32 val = readl(usb2_base + USB2_COMMCTRL);
+
+ dev_vdbg(ch->dev, "%s: %08x, %d\n", __func__, val, host);
+ if (host)
+ val &= ~USB2_COMMCTRL_OTG_PERI;
+ else
+ val |= USB2_COMMCTRL_OTG_PERI;
+ writel(val, usb2_base + USB2_COMMCTRL);
+}
+
+static void rcar_gen3_set_linectrl(struct rcar_gen3_chan *ch, int dp, int dm)
+{
+ void __iomem *usb2_base = ch->base;
+ u32 val = readl(usb2_base + USB2_LINECTRL1);
+
+ dev_vdbg(ch->dev, "%s: %08x, %d, %d\n", __func__, val, dp, dm);
+ val &= ~(USB2_LINECTRL1_DP_RPD | USB2_LINECTRL1_DM_RPD);
+ if (dp)
+ val |= USB2_LINECTRL1_DP_RPD;
+ if (dm)
+ val |= USB2_LINECTRL1_DM_RPD;
+ writel(val, usb2_base + USB2_LINECTRL1);
+}
+
+static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus)
+{
+ void __iomem *usb2_base = ch->base;
+ u32 vbus_ctrl_reg = USB2_ADPCTRL;
+ u32 vbus_ctrl_val = USB2_ADPCTRL_DRVVBUS;
+ u32 val;
+
+ dev_vdbg(ch->dev, "%s: %08x, %d\n", __func__, val, vbus);
+ if (ch->soc_no_adp_ctrl) {
+ vbus_ctrl_reg = USB2_VBCTRL;
+ vbus_ctrl_val = USB2_VBCTRL_VBOUT;
+ }
+
+ val = readl(usb2_base + vbus_ctrl_reg);
+ if (vbus)
+ val |= vbus_ctrl_val;
+ else
+ val &= ~vbus_ctrl_val;
+ writel(val, usb2_base + vbus_ctrl_reg);
+}
+
+static void rcar_gen3_control_otg_irq(struct rcar_gen3_chan *ch, int enable)
+{
+ void __iomem *usb2_base = ch->base;
+ u32 val = readl(usb2_base + USB2_OBINTEN);
+
+ if (ch->uses_otg_pins && enable)
+ val |= ch->obint_enable_bits;
+ else
+ val &= ~ch->obint_enable_bits;
+ writel(val, usb2_base + USB2_OBINTEN);
+}
+
+static void rcar_gen3_init_for_host(struct rcar_gen3_chan *ch)
+{
+ rcar_gen3_set_linectrl(ch, 1, 1);
+ rcar_gen3_set_host_mode(ch, 1);
+ rcar_gen3_enable_vbus_ctrl(ch, 1);
+
+ ch->extcon_host = true;
+ schedule_work(&ch->work);
+}
+
+static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch)
+{
+ rcar_gen3_set_linectrl(ch, 0, 1);
+ rcar_gen3_set_host_mode(ch, 0);
+ rcar_gen3_enable_vbus_ctrl(ch, 0);
+
+ ch->extcon_host = false;
+ schedule_work(&ch->work);
+}
+
+static void rcar_gen3_init_for_b_host(struct rcar_gen3_chan *ch)
+{
+ void __iomem *usb2_base = ch->base;
+ u32 val;
+
+ val = readl(usb2_base + USB2_LINECTRL1);
+ writel(val | USB2_LINECTRL1_OPMODE_NODRV, usb2_base + USB2_LINECTRL1);
+
+ rcar_gen3_set_linectrl(ch, 1, 1);
+ rcar_gen3_set_host_mode(ch, 1);
+ rcar_gen3_enable_vbus_ctrl(ch, 0);
+
+ val = readl(usb2_base + USB2_LINECTRL1);
+ writel(val & ~USB2_LINECTRL1_OPMODE_NODRV, usb2_base + USB2_LINECTRL1);
+}
+
+static void rcar_gen3_init_for_a_peri(struct rcar_gen3_chan *ch)
+{
+ rcar_gen3_set_linectrl(ch, 0, 1);
+ rcar_gen3_set_host_mode(ch, 0);
+ rcar_gen3_enable_vbus_ctrl(ch, 1);
+}
+
+static void rcar_gen3_init_from_a_peri_to_a_host(struct rcar_gen3_chan *ch)
+{
+ rcar_gen3_control_otg_irq(ch, 0);
+
+ rcar_gen3_enable_vbus_ctrl(ch, 1);
+ rcar_gen3_init_for_host(ch);
+
+ rcar_gen3_control_otg_irq(ch, 1);
+}
+
+static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
+{
+ if (!ch->uses_otg_pins)
+ return (ch->dr_mode == USB_DR_MODE_HOST) ? false : true;
+
+ if (ch->soc_no_adp_ctrl)
+ return !!(readl(ch->base + USB2_LINECTRL1) & USB2_LINECTRL1_USB2_IDMON);
+
+ return !!(readl(ch->base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG);
+}
+
+static void rcar_gen3_device_recognition(struct rcar_gen3_chan *ch)
+{
+ if (!rcar_gen3_check_id(ch))
+ rcar_gen3_init_for_host(ch);
+ else
+ rcar_gen3_init_for_peri(ch);
+}
+
+static bool rcar_gen3_is_host(struct rcar_gen3_chan *ch)
+{
+ return !(readl(ch->base + USB2_COMMCTRL) & USB2_COMMCTRL_OTG_PERI);
+}
+
+static enum phy_mode rcar_gen3_get_phy_mode(struct rcar_gen3_chan *ch)
+{
+ if (rcar_gen3_is_host(ch))
+ return PHY_MODE_USB_HOST;
+
+ return PHY_MODE_USB_DEVICE;
+}
+
+static bool rcar_gen3_is_any_rphy_initialized(struct rcar_gen3_chan *ch)
+{
+ int i;
+
+ for (i = 0; i < NUM_OF_PHYS; i++) {
+ if (ch->rphys[i].initialized)
+ return true;
+ }
+
+ return false;
+}
+
+static bool rcar_gen3_needs_init_otg(struct rcar_gen3_chan *ch)
+{
+ int i;
+
+ for (i = 0; i < NUM_OF_PHYS; i++) {
+ if (ch->rphys[i].otg_initialized)
+ return false;
+ }
+
+ return true;
+}
+
+static bool rcar_gen3_are_all_rphys_power_off(struct rcar_gen3_chan *ch)
+{
+ int i;
+
+ for (i = 0; i < NUM_OF_PHYS; i++) {
+ if (ch->rphys[i].powered)
+ return false;
+ }
+
+ return true;
+}
+
+static ssize_t role_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
+ bool is_b_device;
+ enum phy_mode cur_mode, new_mode;
+
+ if (!ch->is_otg_channel || !rcar_gen3_is_any_rphy_initialized(ch))
+ return -EIO;
+
+ if (sysfs_streq(buf, "host"))
+ new_mode = PHY_MODE_USB_HOST;
+ else if (sysfs_streq(buf, "peripheral"))
+ new_mode = PHY_MODE_USB_DEVICE;
+ else
+ return -EINVAL;
+
+ /* is_b_device: true is B-Device. false is A-Device. */
+ is_b_device = rcar_gen3_check_id(ch);
+ cur_mode = rcar_gen3_get_phy_mode(ch);
+
+ /* If current and new mode is the same, this returns the error */
+ if (cur_mode == new_mode)
+ return -EINVAL;
+
+ if (new_mode == PHY_MODE_USB_HOST) { /* And is_host must be false */
+ if (!is_b_device) /* A-Peripheral */
+ rcar_gen3_init_from_a_peri_to_a_host(ch);
+ else /* B-Peripheral */
+ rcar_gen3_init_for_b_host(ch);
+ } else { /* And is_host must be true */
+ if (!is_b_device) /* A-Host */
+ rcar_gen3_init_for_a_peri(ch);
+ else /* B-Host */
+ rcar_gen3_init_for_peri(ch);
+ }
+
+ return count;
+}
+
+static ssize_t role_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
+
+ if (!ch->is_otg_channel || !rcar_gen3_is_any_rphy_initialized(ch))
+ return -EIO;
+
+ return sprintf(buf, "%s\n", rcar_gen3_is_host(ch) ? "host" :
+ "peripheral");
+}
+static DEVICE_ATTR_RW(role);
+
+static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
+{
+ void __iomem *usb2_base = ch->base;
+ u32 val;
+
+ /* Should not use functions of read-modify-write a register */
+ val = readl(usb2_base + USB2_LINECTRL1);
+ val = (val & ~USB2_LINECTRL1_DP_RPD) | USB2_LINECTRL1_DPRPD_EN |
+ USB2_LINECTRL1_DMRPD_EN | USB2_LINECTRL1_DM_RPD;
+ writel(val, usb2_base + USB2_LINECTRL1);
+
+ if (!ch->soc_no_adp_ctrl) {
+ val = readl(usb2_base + USB2_VBCTRL);
+ val &= ~USB2_VBCTRL_OCCLREN;
+ writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL);
+ val = readl(usb2_base + USB2_ADPCTRL);
+ writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL);
+ }
+ msleep(20);
+
+ writel(0xffffffff, usb2_base + USB2_OBINTSTA);
+ writel(ch->obint_enable_bits, usb2_base + USB2_OBINTEN);
+
+ rcar_gen3_device_recognition(ch);
+}
+
+static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
+{
+ struct rcar_gen3_chan *ch = _ch;
+ void __iomem *usb2_base = ch->base;
+ u32 status = readl(usb2_base + USB2_OBINTSTA);
+ irqreturn_t ret = IRQ_NONE;
+
+ if (status & ch->obint_enable_bits) {
+ dev_vdbg(ch->dev, "%s: %08x\n", __func__, status);
+ writel(ch->obint_enable_bits, usb2_base + USB2_OBINTSTA);
+ rcar_gen3_device_recognition(ch);
+ ret = IRQ_HANDLED;
+ }
+
+ return ret;
+}
+
+static int rcar_gen3_phy_usb2_init(struct phy *p)
+{
+ struct rcar_gen3_phy *rphy = phy_get_drvdata(p);
+ struct rcar_gen3_chan *channel = rphy->ch;
+ void __iomem *usb2_base = channel->base;
+ u32 val;
+ int ret;
+
+ if (!rcar_gen3_is_any_rphy_initialized(channel) && channel->irq >= 0) {
+ INIT_WORK(&channel->work, rcar_gen3_phy_usb2_work);
+ ret = request_irq(channel->irq, rcar_gen3_phy_usb2_irq,
+ IRQF_SHARED, dev_name(channel->dev), channel);
+ if (ret < 0) {
+ dev_err(channel->dev, "No irq handler (%d)\n", channel->irq);
+ return ret;
+ }
+ }
+
+ /* Initialize USB2 part */
+ val = readl(usb2_base + USB2_INT_ENABLE);
+ val |= USB2_INT_ENABLE_UCOM_INTEN | rphy->int_enable_bits;
+ writel(val, usb2_base + USB2_INT_ENABLE);
+ writel(USB2_SPD_RSM_TIMSET_INIT, usb2_base + USB2_SPD_RSM_TIMSET);
+ writel(USB2_OC_TIMSET_INIT, usb2_base + USB2_OC_TIMSET);
+
+ /* Initialize otg part */
+ if (channel->is_otg_channel) {
+ if (rcar_gen3_needs_init_otg(channel))
+ rcar_gen3_init_otg(channel);
+ rphy->otg_initialized = true;
+ }
+
+ rphy->initialized = true;
+
+ return 0;
+}
+
+static int rcar_gen3_phy_usb2_exit(struct phy *p)
+{
+ struct rcar_gen3_phy *rphy = phy_get_drvdata(p);
+ struct rcar_gen3_chan *channel = rphy->ch;
+ void __iomem *usb2_base = channel->base;
+ u32 val;
+
+ rphy->initialized = false;
+
+ if (channel->is_otg_channel)
+ rphy->otg_initialized = false;
+
+ val = readl(usb2_base + USB2_INT_ENABLE);
+ val &= ~rphy->int_enable_bits;
+ if (!rcar_gen3_is_any_rphy_initialized(channel))
+ val &= ~USB2_INT_ENABLE_UCOM_INTEN;
+ writel(val, usb2_base + USB2_INT_ENABLE);
+
+ if (channel->irq >= 0 && !rcar_gen3_is_any_rphy_initialized(channel))
+ free_irq(channel->irq, channel);
+
+ return 0;
+}
+
+static int rcar_gen3_phy_usb2_power_on(struct phy *p)
+{
+ struct rcar_gen3_phy *rphy = phy_get_drvdata(p);
+ struct rcar_gen3_chan *channel = rphy->ch;
+ void __iomem *usb2_base = channel->base;
+ u32 val;
+ int ret = 0;
+
+ mutex_lock(&channel->lock);
+ if (!rcar_gen3_are_all_rphys_power_off(channel))
+ goto out;
+
+ if (channel->vbus) {
+ ret = regulator_enable(channel->vbus);
+ if (ret)
+ goto out;
+ }
+
+ val = readl(usb2_base + USB2_USBCTR);
+ val |= USB2_USBCTR_PLL_RST;
+ writel(val, usb2_base + USB2_USBCTR);
+ val &= ~USB2_USBCTR_PLL_RST;
+ writel(val, usb2_base + USB2_USBCTR);
+
+out:
+ /* The powered flag should be set for any other phys anyway */
+ rphy->powered = true;
+ mutex_unlock(&channel->lock);
+
+ return 0;
+}
+
+static int rcar_gen3_phy_usb2_power_off(struct phy *p)
+{
+ struct rcar_gen3_phy *rphy = phy_get_drvdata(p);
+ struct rcar_gen3_chan *channel = rphy->ch;
+ int ret = 0;
+
+ mutex_lock(&channel->lock);
+ rphy->powered = false;
+
+ if (!rcar_gen3_are_all_rphys_power_off(channel))
+ goto out;
+
+ if (channel->vbus)
+ ret = regulator_disable(channel->vbus);
+
+out:
+ mutex_unlock(&channel->lock);
+
+ return ret;
+}
+
+static const struct phy_ops rcar_gen3_phy_usb2_ops = {
+ .init = rcar_gen3_phy_usb2_init,
+ .exit = rcar_gen3_phy_usb2_exit,
+ .power_on = rcar_gen3_phy_usb2_power_on,
+ .power_off = rcar_gen3_phy_usb2_power_off,
+ .owner = THIS_MODULE,
+};
+
+static const struct phy_ops rz_g1c_phy_usb2_ops = {
+ .init = rcar_gen3_phy_usb2_init,
+ .exit = rcar_gen3_phy_usb2_exit,
+ .owner = THIS_MODULE,
+};
+
+static const struct rcar_gen3_phy_drv_data rcar_gen3_phy_usb2_data = {
+ .phy_usb2_ops = &rcar_gen3_phy_usb2_ops,
+ .no_adp_ctrl = false,
+};
+
+static const struct rcar_gen3_phy_drv_data rz_g1c_phy_usb2_data = {
+ .phy_usb2_ops = &rz_g1c_phy_usb2_ops,
+ .no_adp_ctrl = false,
+};
+
+static const struct rcar_gen3_phy_drv_data rz_g2l_phy_usb2_data = {
+ .phy_usb2_ops = &rcar_gen3_phy_usb2_ops,
+ .no_adp_ctrl = true,
+};
+
+static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
+ {
+ .compatible = "renesas,usb2-phy-r8a77470",
+ .data = &rz_g1c_phy_usb2_data,
+ },
+ {
+ .compatible = "renesas,usb2-phy-r8a7795",
+ .data = &rcar_gen3_phy_usb2_data,
+ },
+ {
+ .compatible = "renesas,usb2-phy-r8a7796",
+ .data = &rcar_gen3_phy_usb2_data,
+ },
+ {
+ .compatible = "renesas,usb2-phy-r8a77965",
+ .data = &rcar_gen3_phy_usb2_data,
+ },
+ {
+ .compatible = "renesas,rzg2l-usb2-phy",
+ .data = &rz_g2l_phy_usb2_data,
+ },
+ {
+ .compatible = "renesas,rcar-gen3-usb2-phy",
+ .data = &rcar_gen3_phy_usb2_data,
+ },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table);
+
+static const unsigned int rcar_gen3_phy_cable[] = {
+ EXTCON_USB,
+ EXTCON_USB_HOST,
+ EXTCON_NONE,
+};
+
+static struct phy *rcar_gen3_phy_usb2_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
+
+ if (args->args_count == 0) /* For old version dts */
+ return ch->rphys[PHY_INDEX_BOTH_HC].phy;
+ else if (args->args_count > 1) /* Prevent invalid args count */
+ return ERR_PTR(-ENODEV);
+
+ if (args->args[0] >= NUM_OF_PHYS)
+ return ERR_PTR(-ENODEV);
+
+ return ch->rphys[args->args[0]].phy;
+}
+
+static enum usb_dr_mode rcar_gen3_get_dr_mode(struct device_node *np)
+{
+ enum usb_dr_mode candidate = USB_DR_MODE_UNKNOWN;
+ int i;
+
+ /*
+ * If one of device nodes has other dr_mode except UNKNOWN,
+ * this function returns UNKNOWN. To achieve backward compatibility,
+ * this loop starts the index as 0.
+ */
+ for (i = 0; i < NUM_OF_PHYS; i++) {
+ enum usb_dr_mode mode = of_usb_get_dr_mode_by_phy(np, i);
+
+ if (mode != USB_DR_MODE_UNKNOWN) {
+ if (candidate == USB_DR_MODE_UNKNOWN)
+ candidate = mode;
+ else if (candidate != mode)
+ return USB_DR_MODE_UNKNOWN;
+ }
+ }
+
+ return candidate;
+}
+
+static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
+{
+ const struct rcar_gen3_phy_drv_data *phy_data;
+ struct device *dev = &pdev->dev;
+ struct rcar_gen3_chan *channel;
+ struct phy_provider *provider;
+ int ret = 0, i;
+
+ if (!dev->of_node) {
+ dev_err(dev, "This driver needs device tree\n");
+ return -EINVAL;
+ }
+
+ channel = devm_kzalloc(dev, sizeof(*channel), GFP_KERNEL);
+ if (!channel)
+ return -ENOMEM;
+
+ channel->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(channel->base))
+ return PTR_ERR(channel->base);
+
+ channel->obint_enable_bits = USB2_OBINT_BITS;
+ /* get irq number here and request_irq for OTG in phy_init */
+ channel->irq = platform_get_irq_optional(pdev, 0);
+ channel->dr_mode = rcar_gen3_get_dr_mode(dev->of_node);
+ if (channel->dr_mode != USB_DR_MODE_UNKNOWN) {
+ int ret;
+
+ channel->is_otg_channel = true;
+ channel->uses_otg_pins = !of_property_read_bool(dev->of_node,
+ "renesas,no-otg-pins");
+ channel->extcon = devm_extcon_dev_allocate(dev,
+ rcar_gen3_phy_cable);
+ if (IS_ERR(channel->extcon))
+ return PTR_ERR(channel->extcon);
+
+ ret = devm_extcon_dev_register(dev, channel->extcon);
+ if (ret < 0) {
+ dev_err(dev, "Failed to register extcon\n");
+ return ret;
+ }
+ }
+
+ /*
+ * devm_phy_create() will call pm_runtime_enable(&phy->dev);
+ * And then, phy-core will manage runtime pm for this device.
+ */
+ pm_runtime_enable(dev);
+
+ phy_data = of_device_get_match_data(dev);
+ if (!phy_data) {
+ ret = -EINVAL;
+ goto error;
+ }
+
+ channel->soc_no_adp_ctrl = phy_data->no_adp_ctrl;
+ if (phy_data->no_adp_ctrl)
+ channel->obint_enable_bits = USB2_OBINT_IDCHG_EN;
+
+ mutex_init(&channel->lock);
+ for (i = 0; i < NUM_OF_PHYS; i++) {
+ channel->rphys[i].phy = devm_phy_create(dev, NULL,
+ phy_data->phy_usb2_ops);
+ if (IS_ERR(channel->rphys[i].phy)) {
+ dev_err(dev, "Failed to create USB2 PHY\n");
+ ret = PTR_ERR(channel->rphys[i].phy);
+ goto error;
+ }
+ channel->rphys[i].ch = channel;
+ channel->rphys[i].int_enable_bits = rcar_gen3_int_enable[i];
+ phy_set_drvdata(channel->rphys[i].phy, &channel->rphys[i]);
+ }
+
+ channel->vbus = devm_regulator_get_optional(dev, "vbus");
+ if (IS_ERR(channel->vbus)) {
+ if (PTR_ERR(channel->vbus) == -EPROBE_DEFER) {
+ ret = PTR_ERR(channel->vbus);
+ goto error;
+ }
+ channel->vbus = NULL;
+ }
+
+ platform_set_drvdata(pdev, channel);
+ channel->dev = dev;
+
+ provider = devm_of_phy_provider_register(dev, rcar_gen3_phy_usb2_xlate);
+ if (IS_ERR(provider)) {
+ dev_err(dev, "Failed to register PHY provider\n");
+ ret = PTR_ERR(provider);
+ goto error;
+ } else if (channel->is_otg_channel) {
+ int ret;
+
+ ret = device_create_file(dev, &dev_attr_role);
+ if (ret < 0)
+ goto error;
+ }
+
+ return 0;
+
+error:
+ pm_runtime_disable(dev);
+
+ return ret;
+}
+
+static int rcar_gen3_phy_usb2_remove(struct platform_device *pdev)
+{
+ struct rcar_gen3_chan *channel = platform_get_drvdata(pdev);
+
+ if (channel->is_otg_channel)
+ device_remove_file(&pdev->dev, &dev_attr_role);
+
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+};
+
+static struct platform_driver rcar_gen3_phy_usb2_driver = {
+ .driver = {
+ .name = "phy_rcar_gen3_usb2",
+ .of_match_table = rcar_gen3_phy_usb2_match_table,
+ },
+ .probe = rcar_gen3_phy_usb2_probe,
+ .remove = rcar_gen3_phy_usb2_remove,
+};
+module_platform_driver(rcar_gen3_phy_usb2_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Renesas R-Car Gen3 USB 2.0 PHY");
+MODULE_AUTHOR("Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>");
diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb3.c b/drivers/phy/renesas/phy-rcar-gen3-usb3.c
new file mode 100644
index 000000000..f27d6f471
--- /dev/null
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb3.c
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas R-Car Gen3 for USB3.0 PHY driver
+ *
+ * Copyright (C) 2017 Renesas Electronics Corporation
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#define USB30_CLKSET0 0x034
+#define USB30_CLKSET1 0x036
+#define USB30_SSC_SET 0x038
+#define USB30_PHY_ENABLE 0x060
+#define USB30_VBUS_EN 0x064
+
+/* USB30_CLKSET0 */
+#define CLKSET0_PRIVATE 0x05c0
+#define CLKSET0_USB30_FSEL_USB_EXTAL 0x0002
+
+/* USB30_CLKSET1 */
+#define CLKSET1_USB30_PLL_MULTI_SHIFT 6
+#define CLKSET1_USB30_PLL_MULTI_USB_EXTAL (0x64 << \
+ CLKSET1_USB30_PLL_MULTI_SHIFT)
+#define CLKSET1_PHYRESET BIT(4) /* 1: reset */
+#define CLKSET1_REF_CLKDIV BIT(3) /* 1: USB_EXTAL */
+#define CLKSET1_PRIVATE_2_1 BIT(1) /* Write B'01 */
+#define CLKSET1_REF_CLK_SEL BIT(0) /* 1: USB3S0_CLK_P */
+
+/* USB30_SSC_SET */
+#define SSC_SET_SSC_EN BIT(12)
+#define SSC_SET_RANGE_SHIFT 9
+#define SSC_SET_RANGE_4980 (0x0 << SSC_SET_RANGE_SHIFT)
+#define SSC_SET_RANGE_4492 (0x1 << SSC_SET_RANGE_SHIFT)
+#define SSC_SET_RANGE_4003 (0x2 << SSC_SET_RANGE_SHIFT)
+
+/* USB30_PHY_ENABLE */
+#define PHY_ENABLE_RESET_EN BIT(4)
+
+/* USB30_VBUS_EN */
+#define VBUS_EN_VBUS_EN BIT(1)
+
+struct rcar_gen3_usb3 {
+ void __iomem *base;
+ struct phy *phy;
+ u32 ssc_range;
+ bool usb3s_clk;
+ bool usb_extal;
+};
+
+static void write_clkset1_for_usb_extal(struct rcar_gen3_usb3 *r, bool reset)
+{
+ u16 val = CLKSET1_USB30_PLL_MULTI_USB_EXTAL |
+ CLKSET1_REF_CLKDIV | CLKSET1_PRIVATE_2_1;
+
+ if (reset)
+ val |= CLKSET1_PHYRESET;
+
+ writew(val, r->base + USB30_CLKSET1);
+}
+
+static void rcar_gen3_phy_usb3_enable_ssc(struct rcar_gen3_usb3 *r)
+{
+ u16 val = SSC_SET_SSC_EN;
+
+ switch (r->ssc_range) {
+ case 4980:
+ val |= SSC_SET_RANGE_4980;
+ break;
+ case 4492:
+ val |= SSC_SET_RANGE_4492;
+ break;
+ case 4003:
+ val |= SSC_SET_RANGE_4003;
+ break;
+ default:
+ dev_err(&r->phy->dev, "%s: unsupported range (%x)\n", __func__,
+ r->ssc_range);
+ return;
+ }
+
+ writew(val, r->base + USB30_SSC_SET);
+}
+
+static void rcar_gen3_phy_usb3_select_usb_extal(struct rcar_gen3_usb3 *r)
+{
+ write_clkset1_for_usb_extal(r, false);
+ if (r->ssc_range)
+ rcar_gen3_phy_usb3_enable_ssc(r);
+ writew(CLKSET0_PRIVATE | CLKSET0_USB30_FSEL_USB_EXTAL,
+ r->base + USB30_CLKSET0);
+ writew(PHY_ENABLE_RESET_EN, r->base + USB30_PHY_ENABLE);
+ write_clkset1_for_usb_extal(r, true);
+ usleep_range(10, 20);
+ write_clkset1_for_usb_extal(r, false);
+}
+
+static int rcar_gen3_phy_usb3_init(struct phy *p)
+{
+ struct rcar_gen3_usb3 *r = phy_get_drvdata(p);
+
+ dev_vdbg(&r->phy->dev, "%s: enter (%d, %d, %d)\n", __func__,
+ r->usb3s_clk, r->usb_extal, r->ssc_range);
+
+ if (!r->usb3s_clk && r->usb_extal)
+ rcar_gen3_phy_usb3_select_usb_extal(r);
+
+ /* Enables VBUS detection anyway */
+ writew(VBUS_EN_VBUS_EN, r->base + USB30_VBUS_EN);
+
+ return 0;
+}
+
+static const struct phy_ops rcar_gen3_phy_usb3_ops = {
+ .init = rcar_gen3_phy_usb3_init,
+ .owner = THIS_MODULE,
+};
+
+static const struct of_device_id rcar_gen3_phy_usb3_match_table[] = {
+ { .compatible = "renesas,rcar-gen3-usb3-phy" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb3_match_table);
+
+static int rcar_gen3_phy_usb3_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct rcar_gen3_usb3 *r;
+ struct phy_provider *provider;
+ int ret = 0;
+ struct clk *clk;
+
+ if (!dev->of_node) {
+ dev_err(dev, "This driver needs device tree\n");
+ return -EINVAL;
+ }
+
+ r = devm_kzalloc(dev, sizeof(*r), GFP_KERNEL);
+ if (!r)
+ return -ENOMEM;
+
+ r->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(r->base))
+ return PTR_ERR(r->base);
+
+ clk = devm_clk_get(dev, "usb3s_clk");
+ if (!IS_ERR(clk) && !clk_prepare_enable(clk)) {
+ r->usb3s_clk = !!clk_get_rate(clk);
+ clk_disable_unprepare(clk);
+ }
+ clk = devm_clk_get(dev, "usb_extal");
+ if (!IS_ERR(clk) && !clk_prepare_enable(clk)) {
+ r->usb_extal = !!clk_get_rate(clk);
+ clk_disable_unprepare(clk);
+ }
+
+ if (!r->usb3s_clk && !r->usb_extal) {
+ dev_err(dev, "This driver needs usb3s_clk and/or usb_extal\n");
+ ret = -EINVAL;
+ goto error;
+ }
+
+ /*
+ * devm_phy_create() will call pm_runtime_enable(&phy->dev);
+ * And then, phy-core will manage runtime pm for this device.
+ */
+ pm_runtime_enable(dev);
+
+ r->phy = devm_phy_create(dev, NULL, &rcar_gen3_phy_usb3_ops);
+ if (IS_ERR(r->phy)) {
+ dev_err(dev, "Failed to create USB3 PHY\n");
+ ret = PTR_ERR(r->phy);
+ goto error;
+ }
+
+ of_property_read_u32(dev->of_node, "renesas,ssc-range", &r->ssc_range);
+
+ platform_set_drvdata(pdev, r);
+ phy_set_drvdata(r->phy, r);
+
+ provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(provider)) {
+ dev_err(dev, "Failed to register PHY provider\n");
+ ret = PTR_ERR(provider);
+ goto error;
+ }
+
+ return 0;
+
+error:
+ pm_runtime_disable(dev);
+
+ return ret;
+}
+
+static int rcar_gen3_phy_usb3_remove(struct platform_device *pdev)
+{
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+};
+
+static struct platform_driver rcar_gen3_phy_usb3_driver = {
+ .driver = {
+ .name = "phy_rcar_gen3_usb3",
+ .of_match_table = rcar_gen3_phy_usb3_match_table,
+ },
+ .probe = rcar_gen3_phy_usb3_probe,
+ .remove = rcar_gen3_phy_usb3_remove,
+};
+module_platform_driver(rcar_gen3_phy_usb3_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Renesas R-Car Gen3 USB 3.0 PHY");
+MODULE_AUTHOR("Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>");