summaryrefslogtreecommitdiffstats
path: root/drivers/platform/chrome/wilco_ec/mailbox.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/platform/chrome/wilco_ec/mailbox.c')
-rw-r--r--drivers/platform/chrome/wilco_ec/mailbox.c215
1 files changed, 215 insertions, 0 deletions
diff --git a/drivers/platform/chrome/wilco_ec/mailbox.c b/drivers/platform/chrome/wilco_ec/mailbox.c
new file mode 100644
index 000000000..0f98358ea
--- /dev/null
+++ b/drivers/platform/chrome/wilco_ec/mailbox.c
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Mailbox interface for Wilco Embedded Controller
+ *
+ * Copyright 2018 Google LLC
+ *
+ * The Wilco EC is similar to a typical ChromeOS embedded controller.
+ * It uses the same MEC based low-level communication and a similar
+ * protocol, but with some important differences. The EC firmware does
+ * not support the same mailbox commands so it is not registered as a
+ * cros_ec device type.
+ *
+ * Most messages follow a standard format, but there are some exceptions
+ * and an interface is provided to do direct/raw transactions that do not
+ * make assumptions about byte placement.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/platform_data/wilco-ec.h>
+#include <linux/platform_device.h>
+
+#include "../cros_ec_lpc_mec.h"
+
+/* Version of mailbox interface */
+#define EC_MAILBOX_VERSION 0
+
+/* Command to start mailbox transaction */
+#define EC_MAILBOX_START_COMMAND 0xda
+
+/* Version of EC protocol */
+#define EC_MAILBOX_PROTO_VERSION 3
+
+/* Number of header bytes to be counted as data bytes */
+#define EC_MAILBOX_DATA_EXTRA 2
+
+/* Maximum timeout */
+#define EC_MAILBOX_TIMEOUT HZ
+
+/* EC response flags */
+#define EC_CMDR_DATA BIT(0) /* Data ready for host to read */
+#define EC_CMDR_PENDING BIT(1) /* Write pending to EC */
+#define EC_CMDR_BUSY BIT(2) /* EC is busy processing a command */
+#define EC_CMDR_CMD BIT(3) /* Last host write was a command */
+
+/**
+ * wilco_ec_response_timed_out() - Wait for EC response.
+ * @ec: EC device.
+ *
+ * Return: true if EC timed out, false if EC did not time out.
+ */
+static bool wilco_ec_response_timed_out(struct wilco_ec_device *ec)
+{
+ unsigned long timeout = jiffies + EC_MAILBOX_TIMEOUT;
+
+ do {
+ if (!(inb(ec->io_command->start) &
+ (EC_CMDR_PENDING | EC_CMDR_BUSY)))
+ return false;
+ usleep_range(100, 200);
+ } while (time_before(jiffies, timeout));
+
+ return true;
+}
+
+/**
+ * wilco_ec_checksum() - Compute 8-bit checksum over data range.
+ * @data: Data to checksum.
+ * @size: Number of bytes to checksum.
+ *
+ * Return: 8-bit checksum of provided data.
+ */
+static u8 wilco_ec_checksum(const void *data, size_t size)
+{
+ u8 *data_bytes = (u8 *)data;
+ u8 checksum = 0;
+ size_t i;
+
+ for (i = 0; i < size; i++)
+ checksum += data_bytes[i];
+
+ return checksum;
+}
+
+/**
+ * wilco_ec_prepare() - Prepare the request structure for the EC.
+ * @msg: EC message with request information.
+ * @rq: EC request structure to fill.
+ */
+static void wilco_ec_prepare(struct wilco_ec_message *msg,
+ struct wilco_ec_request *rq)
+{
+ memset(rq, 0, sizeof(*rq));
+ rq->struct_version = EC_MAILBOX_PROTO_VERSION;
+ rq->mailbox_id = msg->type;
+ rq->mailbox_version = EC_MAILBOX_VERSION;
+ rq->data_size = msg->request_size;
+
+ /* Checksum header and data */
+ rq->checksum = wilco_ec_checksum(rq, sizeof(*rq));
+ rq->checksum += wilco_ec_checksum(msg->request_data, msg->request_size);
+ rq->checksum = -rq->checksum;
+}
+
+/**
+ * wilco_ec_transfer() - Perform actual data transfer.
+ * @ec: EC device.
+ * @msg: EC message data for request and response.
+ * @rq: Filled in request structure
+ *
+ * Context: ec->mailbox_lock should be held while using this function.
+ * Return: number of bytes received or negative error code on failure.
+ */
+static int wilco_ec_transfer(struct wilco_ec_device *ec,
+ struct wilco_ec_message *msg,
+ struct wilco_ec_request *rq)
+{
+ struct wilco_ec_response *rs;
+ u8 checksum;
+ u8 flag;
+
+ /* Write request header, then data */
+ cros_ec_lpc_io_bytes_mec(MEC_IO_WRITE, 0, sizeof(*rq), (u8 *)rq);
+ cros_ec_lpc_io_bytes_mec(MEC_IO_WRITE, sizeof(*rq), msg->request_size,
+ msg->request_data);
+
+ /* Start the command */
+ outb(EC_MAILBOX_START_COMMAND, ec->io_command->start);
+
+ /* For some commands (eg shutdown) the EC will not respond, that's OK */
+ if (msg->flags & WILCO_EC_FLAG_NO_RESPONSE) {
+ dev_dbg(ec->dev, "EC does not respond to this command\n");
+ return 0;
+ }
+
+ /* Wait for it to complete */
+ if (wilco_ec_response_timed_out(ec)) {
+ dev_dbg(ec->dev, "response timed out\n");
+ return -ETIMEDOUT;
+ }
+
+ /* Check result */
+ flag = inb(ec->io_data->start);
+ if (flag) {
+ dev_dbg(ec->dev, "bad response: 0x%02x\n", flag);
+ return -EIO;
+ }
+
+ /* Read back response */
+ rs = ec->data_buffer;
+ checksum = cros_ec_lpc_io_bytes_mec(MEC_IO_READ, 0,
+ sizeof(*rs) + EC_MAILBOX_DATA_SIZE,
+ (u8 *)rs);
+ if (checksum) {
+ dev_dbg(ec->dev, "bad packet checksum 0x%02x\n", rs->checksum);
+ return -EBADMSG;
+ }
+
+ if (rs->result) {
+ dev_dbg(ec->dev, "EC reported failure: 0x%02x\n", rs->result);
+ return -EBADMSG;
+ }
+
+ if (rs->data_size != EC_MAILBOX_DATA_SIZE) {
+ dev_dbg(ec->dev, "unexpected packet size (%u != %u)\n",
+ rs->data_size, EC_MAILBOX_DATA_SIZE);
+ return -EMSGSIZE;
+ }
+
+ if (rs->data_size < msg->response_size) {
+ dev_dbg(ec->dev, "EC didn't return enough data (%u < %zu)\n",
+ rs->data_size, msg->response_size);
+ return -EMSGSIZE;
+ }
+
+ memcpy(msg->response_data, rs->data, msg->response_size);
+
+ return rs->data_size;
+}
+
+/**
+ * wilco_ec_mailbox() - Send EC request and receive EC response.
+ * @ec: EC device.
+ * @msg: EC message data for request and response.
+ *
+ * On entry msg->type, msg->request_size, and msg->request_data should all be
+ * filled in. If desired, msg->flags can be set.
+ *
+ * If a response is expected, msg->response_size should be set, and
+ * msg->response_data should point to a buffer with enough space. On exit
+ * msg->response_data will be filled.
+ *
+ * Return: number of bytes received or negative error code on failure.
+ */
+int wilco_ec_mailbox(struct wilco_ec_device *ec, struct wilco_ec_message *msg)
+{
+ struct wilco_ec_request *rq;
+ int ret;
+
+ dev_dbg(ec->dev, "type=%04x flags=%02x rslen=%zu rqlen=%zu\n",
+ msg->type, msg->flags, msg->response_size, msg->request_size);
+
+ mutex_lock(&ec->mailbox_lock);
+ /* Prepare request packet */
+ rq = ec->data_buffer;
+ wilco_ec_prepare(msg, rq);
+
+ ret = wilco_ec_transfer(ec, msg, rq);
+ mutex_unlock(&ec->mailbox_lock);
+
+ return ret;
+
+}
+EXPORT_SYMBOL_GPL(wilco_ec_mailbox);