diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/platform/x86/intel/Kconfig | 205 |
1 files changed, 205 insertions, 0 deletions
diff --git a/drivers/platform/x86/intel/Kconfig b/drivers/platform/x86/intel/Kconfig new file mode 100644 index 000000000..794968bda --- /dev/null +++ b/drivers/platform/x86/intel/Kconfig @@ -0,0 +1,205 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Intel x86 Platform Specific Drivers +# + +source "drivers/platform/x86/intel/atomisp2/Kconfig" +source "drivers/platform/x86/intel/ifs/Kconfig" +source "drivers/platform/x86/intel/int1092/Kconfig" +source "drivers/platform/x86/intel/int3472/Kconfig" +source "drivers/platform/x86/intel/pmc/Kconfig" +source "drivers/platform/x86/intel/pmt/Kconfig" +source "drivers/platform/x86/intel/speed_select_if/Kconfig" +source "drivers/platform/x86/intel/telemetry/Kconfig" +source "drivers/platform/x86/intel/wmi/Kconfig" +source "drivers/platform/x86/intel/uncore-frequency/Kconfig" + + +config INTEL_HID_EVENT + tristate "Intel HID Event" + depends on ACPI + depends on INPUT + depends on I2C + select INPUT_SPARSEKMAP + help + This driver provides support for the Intel HID Event hotkey interface. + Some laptops require this driver for hotkey support. + + To compile this driver as a module, choose M here: the module will + be called intel_hid. + +config INTEL_VBTN + tristate "Intel Virtual Button" + depends on ACPI + depends on INPUT + depends on I2C + select INPUT_SPARSEKMAP + help + This driver provides support for the Intel Virtual Button interface. + Some laptops require this driver for power button support. + + To compile this driver as a module, choose M here: the module will + be called intel_vbtn. + +config INTEL_INT0002_VGPIO + tristate "Intel ACPI INT0002 Virtual GPIO driver" + depends on GPIOLIB && ACPI && PM_SLEEP + select GPIOLIB_IRQCHIP + help + Some peripherals on Bay Trail and Cherry Trail platforms signal a + Power Management Event (PME) to the Power Management Controller (PMC) + to wakeup the system. When this happens software needs to explicitly + clear the PME bus 0 status bit in the GPE0a_STS register to avoid an + IRQ storm on IRQ 9. + + This is modelled in ACPI through the INT0002 ACPI device, which is + called a "Virtual GPIO controller" in ACPI because it defines the + event handler to call when the PME triggers through _AEI and _L02 + methods as would be done for a real GPIO interrupt in ACPI. + + To compile this driver as a module, choose M here: the module will + be called intel_int0002_vgpio. + +config INTEL_OAKTRAIL + tristate "Intel Oaktrail Platform Extras" + depends on ACPI + depends on ACPI_VIDEO || ACPI_VIDEO=n + depends on RFKILL && BACKLIGHT_CLASS_DEVICE && ACPI + help + Intel Oaktrail platform need this driver to provide interfaces to + enable/disable the Camera, WiFi, BT etc. devices. If in doubt, say Y + here; it will only load on supported platforms. + +config INTEL_BXTWC_PMIC_TMU + tristate "Intel Broxton Whiskey Cove TMU Driver" + depends on INTEL_SOC_PMIC_BXTWC + depends on MFD_INTEL_PMC_BXT + select REGMAP + help + Select this driver to use Intel Broxton Whiskey Cove PMIC TMU feature. + This driver enables the alarm wakeup functionality in the TMU unit of + Whiskey Cove PMIC. + +config INTEL_CHTDC_TI_PWRBTN + tristate "Intel Cherry Trail Dollar Cove TI power button driver" + depends on INTEL_SOC_PMIC_CHTDC_TI + depends on INPUT + help + This option adds a power button driver for Dollar Cove TI + PMIC on Intel Cherry Trail devices. + + To compile this driver as a module, choose M here: the module + will be called intel_chtdc_ti_pwrbtn. + +config INTEL_CHTWC_INT33FE + tristate "Intel Cherry Trail Whiskey Cove ACPI INT33FE Driver" + depends on X86 && ACPI && I2C && REGULATOR + depends on CHARGER_BQ24190=y || (CHARGER_BQ24190=m && m) + depends on USB_ROLES_INTEL_XHCI=y || (USB_ROLES_INTEL_XHCI=m && m) + depends on TYPEC_MUX_PI3USB30532=y || (TYPEC_MUX_PI3USB30532=m && m) + help + This driver add support for the Intel Cherry Trail Whiskey Cove + INT33FE ACPI device found on the GPD win and the GPD pocket. + + The INT33FE ACPI device on these mini laptops contains I2cSerialBusV2 + resources for a MAX17042 Fuel Gauge, FUSB302 USB Type-C Controller + and PI3USB30532 USB switch. + This driver instantiates i2c-clients for these, so that standard + i2c drivers for these chips can bind to the them. + + If you enable this driver it is advised to also select + CONFIG_TYPEC_FUSB302=m, CONFIG_TYPEC_MUX_PI3USB30532=m and + CONFIG_BATTERY_MAX17042=m. + +config INTEL_ISHTP_ECLITE + tristate "Intel ISHTP eclite controller Driver" + depends on INTEL_ISH_HID + depends on ACPI + help + This driver is for accessing the PSE (Programmable Service Engine) - + an Embedded Controller like IP - using ISHTP (Integrated Sensor Hub + Transport Protocol) to get battery, thermal and UCSI (USB Type-C + Connector System Software Interface) related data from the platform. + Users who don't want to use discrete Embedded Controller on Intel's + Elkhartlake platform can leverage this integrated solution of + ECLite which is part of PSE subsystem. + + To compile this driver as a module, choose M here: the module + will be called intel_ishtp_eclite. + +config INTEL_MRFLD_PWRBTN + tristate "Intel Merrifield Basin Cove power button driver" + depends on INTEL_SOC_PMIC_MRFLD + depends on INPUT + help + This option adds a power button driver for Basin Cove PMIC + on Intel Merrifield devices. + + To compile this driver as a module, choose M here: the module + will be called intel_mrfld_pwrbtn. + +config INTEL_PUNIT_IPC + tristate "Intel P-Unit IPC Driver" + help + This driver provides support for Intel P-Unit Mailbox IPC mechanism, + which is used to bridge the communications between kernel and P-Unit. + +config INTEL_RST + tristate "Intel Rapid Start Technology Driver" + depends on ACPI + help + This driver provides support for modifying parameters on systems + equipped with Intel's Rapid Start Technology. When put in an ACPI + sleep state, these devices will wake after either a configured + timeout or when the system battery reaches a critical state, + automatically copying memory contents to disk. On resume, the + firmware will copy the memory contents back to RAM and resume the OS + as usual. + +config INTEL_SDSI + tristate "Intel Software Defined Silicon Driver" + depends on INTEL_VSEC + depends on X86_64 + help + This driver enables access to the Intel Software Defined Silicon + interface used to provision silicon features with an authentication + certificate and capability license. + + To compile this driver as a module, choose M here: the module will + be called intel_sdsi. + +config INTEL_SMARTCONNECT + tristate "Intel Smart Connect disabling driver" + depends on ACPI + help + Intel Smart Connect is a technology intended to permit devices to + update state by resuming for a short period of time at regular + intervals. If a user enables this functionality under Windows and + then reboots into Linux, the system may remain configured to resume + on suspend. In the absence of any userspace to support it, the system + will then remain awake until something triggers another suspend. + + This driver checks to determine whether the device has Intel Smart + Connect enabled, and if so disables it. + +config INTEL_TURBO_MAX_3 + bool "Intel Turbo Boost Max Technology 3.0 enumeration driver" + depends on X86_64 && SCHED_MC_PRIO + help + This driver reads maximum performance ratio of each CPU and set up + the scheduler priority metrics. In this way scheduler can prefer + CPU with higher performance to schedule tasks. + + This driver is only required when the system is not using Hardware + P-States (HWP). In HWP mode, priority can be read from ACPI tables. + +config INTEL_VSEC + tristate "Intel Vendor Specific Extended Capabilities Driver" + depends on PCI + select AUXILIARY_BUS + help + Adds support for feature drivers exposed using Intel PCIe VSEC and + DVSEC. + + To compile this driver as a module, choose M here: the module will + be called intel_vsec. |