diff options
Diffstat (limited to 'drivers/platform/x86/intel/int3472')
| -rw-r--r-- | drivers/platform/x86/intel/int3472/Kconfig | 30 | ||||
| -rw-r--r-- | drivers/platform/x86/intel/int3472/Makefile | 4 | ||||
| -rw-r--r-- | drivers/platform/x86/intel/int3472/clk_and_regulator.c | 211 | ||||
| -rw-r--r-- | drivers/platform/x86/intel/int3472/common.c | 82 | ||||
| -rw-r--r-- | drivers/platform/x86/intel/int3472/common.h | 122 | ||||
| -rw-r--r-- | drivers/platform/x86/intel/int3472/discrete.c | 423 | ||||
| -rw-r--r-- | drivers/platform/x86/intel/int3472/tps68470.c | 261 | ||||
| -rw-r--r-- | drivers/platform/x86/intel/int3472/tps68470.h | 26 | ||||
| -rw-r--r-- | drivers/platform/x86/intel/int3472/tps68470_board_data.c | 208 |
9 files changed, 1367 insertions, 0 deletions
diff --git a/drivers/platform/x86/intel/int3472/Kconfig b/drivers/platform/x86/intel/int3472/Kconfig new file mode 100644 index 000000000..62e5d4cf9 --- /dev/null +++ b/drivers/platform/x86/intel/int3472/Kconfig @@ -0,0 +1,30 @@ +config INTEL_SKL_INT3472 + tristate "Intel SkyLake ACPI INT3472 Driver" + depends on ACPI + depends on COMMON_CLK + depends on I2C + depends on GPIOLIB + depends on REGULATOR + select MFD_CORE + select REGMAP_I2C + help + This driver adds power controller support for the Intel SkyCam + devices found on the Intel SkyLake platforms. + + The INT3472 is a camera power controller, a logical device found on + Intel Skylake-based systems that can map to different hardware + devices depending on the platform. On machines designed for Chrome OS + it maps to a TPS68470 camera PMIC. On machines designed for Windows, + it maps to either a TP68470 camera PMIC, a uP6641Q sensor PMIC, or a + set of discrete GPIOs and power gates. + + If your device was designed for Chrome OS, this driver will provide + an ACPI OpRegion, which must be available before any of the devices + using it are probed. For this reason, you should select Y if your + device was designed for ChromeOS. For the same reason the + I2C_DESIGNWARE_PLATFORM option must be set to Y too. + + Say Y or M here if you have a SkyLake device designed for use + with Windows or ChromeOS. Say N here if you are not sure. + + The module will be named "intel-skl-int3472". diff --git a/drivers/platform/x86/intel/int3472/Makefile b/drivers/platform/x86/intel/int3472/Makefile new file mode 100644 index 000000000..cfec7784c --- /dev/null +++ b/drivers/platform/x86/intel/int3472/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_INTEL_SKL_INT3472) += intel_skl_int3472_discrete.o \ + intel_skl_int3472_tps68470.o +intel_skl_int3472_discrete-y := discrete.o clk_and_regulator.o common.o +intel_skl_int3472_tps68470-y := tps68470.o tps68470_board_data.o common.o diff --git a/drivers/platform/x86/intel/int3472/clk_and_regulator.c b/drivers/platform/x86/intel/int3472/clk_and_regulator.c new file mode 100644 index 000000000..74dc2cff7 --- /dev/null +++ b/drivers/platform/x86/intel/int3472/clk_and_regulator.c @@ -0,0 +1,211 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Author: Dan Scally <djrscally@gmail.com> */ + +#include <linux/acpi.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/regulator/driver.h> +#include <linux/slab.h> + +#include "common.h" + +/* + * The regulators have to have .ops to be valid, but the only ops we actually + * support are .enable and .disable which are handled via .ena_gpiod. Pass an + * empty struct to clear the check without lying about capabilities. + */ +static const struct regulator_ops int3472_gpio_regulator_ops; + +static int skl_int3472_clk_prepare(struct clk_hw *hw) +{ + struct int3472_gpio_clock *clk = to_int3472_clk(hw); + + gpiod_set_value_cansleep(clk->ena_gpio, 1); + gpiod_set_value_cansleep(clk->led_gpio, 1); + + return 0; +} + +static void skl_int3472_clk_unprepare(struct clk_hw *hw) +{ + struct int3472_gpio_clock *clk = to_int3472_clk(hw); + + gpiod_set_value_cansleep(clk->ena_gpio, 0); + gpiod_set_value_cansleep(clk->led_gpio, 0); +} + +static int skl_int3472_clk_enable(struct clk_hw *hw) +{ + /* + * We're just turning a GPIO on to enable the clock, which operation + * has the potential to sleep. Given .enable() cannot sleep, but + * .prepare() can, we toggle the GPIO in .prepare() instead. Thus, + * nothing to do here. + */ + return 0; +} + +static void skl_int3472_clk_disable(struct clk_hw *hw) +{ + /* Likewise, nothing to do here... */ +} + +static unsigned int skl_int3472_get_clk_frequency(struct int3472_discrete_device *int3472) +{ + union acpi_object *obj; + unsigned int freq; + + obj = skl_int3472_get_acpi_buffer(int3472->sensor, "SSDB"); + if (IS_ERR(obj)) + return 0; /* report rate as 0 on error */ + + if (obj->buffer.length < CIO2_SENSOR_SSDB_MCLKSPEED_OFFSET + sizeof(u32)) { + dev_err(int3472->dev, "The buffer is too small\n"); + kfree(obj); + return 0; + } + + freq = *(u32 *)(obj->buffer.pointer + CIO2_SENSOR_SSDB_MCLKSPEED_OFFSET); + + kfree(obj); + return freq; +} + +static unsigned long skl_int3472_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct int3472_gpio_clock *clk = to_int3472_clk(hw); + + return clk->frequency; +} + +static const struct clk_ops skl_int3472_clock_ops = { + .prepare = skl_int3472_clk_prepare, + .unprepare = skl_int3472_clk_unprepare, + .enable = skl_int3472_clk_enable, + .disable = skl_int3472_clk_disable, + .recalc_rate = skl_int3472_clk_recalc_rate, +}; + +int skl_int3472_register_clock(struct int3472_discrete_device *int3472) +{ + struct clk_init_data init = { + .ops = &skl_int3472_clock_ops, + .flags = CLK_GET_RATE_NOCACHE, + }; + int ret; + + init.name = kasprintf(GFP_KERNEL, "%s-clk", + acpi_dev_name(int3472->adev)); + if (!init.name) + return -ENOMEM; + + int3472->clock.frequency = skl_int3472_get_clk_frequency(int3472); + + int3472->clock.clk_hw.init = &init; + int3472->clock.clk = clk_register(&int3472->adev->dev, + &int3472->clock.clk_hw); + if (IS_ERR(int3472->clock.clk)) { + ret = PTR_ERR(int3472->clock.clk); + goto out_free_init_name; + } + + int3472->clock.cl = clkdev_create(int3472->clock.clk, NULL, + int3472->sensor_name); + if (!int3472->clock.cl) { + ret = -ENOMEM; + goto err_unregister_clk; + } + + kfree(init.name); + return 0; + +err_unregister_clk: + clk_unregister(int3472->clock.clk); +out_free_init_name: + kfree(init.name); + + return ret; +} + +void skl_int3472_unregister_clock(struct int3472_discrete_device *int3472) +{ + clkdev_drop(int3472->clock.cl); + clk_unregister(int3472->clock.clk); +} + +int skl_int3472_register_regulator(struct int3472_discrete_device *int3472, + struct acpi_resource_gpio *agpio) +{ + const struct int3472_sensor_config *sensor_config; + char *path = agpio->resource_source.string_ptr; + struct regulator_consumer_supply supply_map; + struct regulator_init_data init_data = { }; + struct regulator_config cfg = { }; + int ret; + + sensor_config = int3472->sensor_config; + if (IS_ERR(sensor_config)) { + dev_err(int3472->dev, "No sensor module config\n"); + return PTR_ERR(sensor_config); + } + + if (!sensor_config->supply_map.supply) { + dev_err(int3472->dev, "No supply name defined\n"); + return -ENODEV; + } + + init_data.constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS; + init_data.num_consumer_supplies = 1; + supply_map = sensor_config->supply_map; + supply_map.dev_name = int3472->sensor_name; + init_data.consumer_supplies = &supply_map; + + snprintf(int3472->regulator.regulator_name, + sizeof(int3472->regulator.regulator_name), "%s-regulator", + acpi_dev_name(int3472->adev)); + snprintf(int3472->regulator.supply_name, + GPIO_REGULATOR_SUPPLY_NAME_LENGTH, "supply-0"); + + int3472->regulator.rdesc = INT3472_REGULATOR( + int3472->regulator.regulator_name, + int3472->regulator.supply_name, + &int3472_gpio_regulator_ops); + + int3472->regulator.gpio = acpi_get_and_request_gpiod(path, agpio->pin_table[0], + "int3472,regulator"); + if (IS_ERR(int3472->regulator.gpio)) { + dev_err(int3472->dev, "Failed to get regulator GPIO line\n"); + return PTR_ERR(int3472->regulator.gpio); + } + + /* Ensure the pin is in output mode and non-active state */ + gpiod_direction_output(int3472->regulator.gpio, 0); + + cfg.dev = &int3472->adev->dev; + cfg.init_data = &init_data; + cfg.ena_gpiod = int3472->regulator.gpio; + + int3472->regulator.rdev = regulator_register(int3472->dev, + &int3472->regulator.rdesc, + &cfg); + if (IS_ERR(int3472->regulator.rdev)) { + ret = PTR_ERR(int3472->regulator.rdev); + goto err_free_gpio; + } + + return 0; + +err_free_gpio: + gpiod_put(int3472->regulator.gpio); + + return ret; +} + +void skl_int3472_unregister_regulator(struct int3472_discrete_device *int3472) +{ + regulator_unregister(int3472->regulator.rdev); + gpiod_put(int3472->regulator.gpio); +} diff --git a/drivers/platform/x86/intel/int3472/common.c b/drivers/platform/x86/intel/int3472/common.c new file mode 100644 index 000000000..9db2bb0bb --- /dev/null +++ b/drivers/platform/x86/intel/int3472/common.c @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Author: Dan Scally <djrscally@gmail.com> */ + +#include <linux/acpi.h> +#include <linux/slab.h> + +#include "common.h" + +union acpi_object *skl_int3472_get_acpi_buffer(struct acpi_device *adev, char *id) +{ + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + acpi_handle handle = adev->handle; + union acpi_object *obj; + acpi_status status; + + status = acpi_evaluate_object(handle, id, NULL, &buffer); + if (ACPI_FAILURE(status)) + return ERR_PTR(-ENODEV); + + obj = buffer.pointer; + if (!obj) + return ERR_PTR(-ENODEV); + + if (obj->type != ACPI_TYPE_BUFFER) { + acpi_handle_err(handle, "%s object is not an ACPI buffer\n", id); + kfree(obj); + return ERR_PTR(-EINVAL); + } + + return obj; +} + +int skl_int3472_fill_cldb(struct acpi_device *adev, struct int3472_cldb *cldb) +{ + union acpi_object *obj; + int ret; + + obj = skl_int3472_get_acpi_buffer(adev, "CLDB"); + if (IS_ERR(obj)) + return PTR_ERR(obj); + + if (obj->buffer.length > sizeof(*cldb)) { + acpi_handle_err(adev->handle, "The CLDB buffer is too large\n"); + ret = -EINVAL; + goto out_free_obj; + } + + memcpy(cldb, obj->buffer.pointer, obj->buffer.length); + ret = 0; + +out_free_obj: + kfree(obj); + return ret; +} + +/* sensor_adev_ret may be NULL, name_ret must not be NULL */ +int skl_int3472_get_sensor_adev_and_name(struct device *dev, + struct acpi_device **sensor_adev_ret, + const char **name_ret) +{ + struct acpi_device *adev = ACPI_COMPANION(dev); + struct acpi_device *sensor; + int ret = 0; + + sensor = acpi_dev_get_next_consumer_dev(adev, NULL); + if (!sensor) { + dev_err(dev, "INT3472 seems to have no dependents.\n"); + return -ENODEV; + } + + *name_ret = devm_kasprintf(dev, GFP_KERNEL, I2C_DEV_NAME_FORMAT, + acpi_dev_name(sensor)); + if (!*name_ret) + ret = -ENOMEM; + + if (ret == 0 && sensor_adev_ret) + *sensor_adev_ret = sensor; + else + acpi_dev_put(sensor); + + return ret; +} diff --git a/drivers/platform/x86/intel/int3472/common.h b/drivers/platform/x86/intel/int3472/common.h new file mode 100644 index 000000000..53270d19c --- /dev/null +++ b/drivers/platform/x86/intel/int3472/common.h @@ -0,0 +1,122 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Author: Dan Scally <djrscally@gmail.com> */ + +#ifndef _INTEL_SKL_INT3472_H +#define _INTEL_SKL_INT3472_H + +#include <linux/clk-provider.h> +#include <linux/gpio/machine.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/types.h> + +/* FIXME drop this once the I2C_DEV_NAME_FORMAT macro has been added to include/linux/i2c.h */ +#ifndef I2C_DEV_NAME_FORMAT +#define I2C_DEV_NAME_FORMAT "i2c-%s" +#endif + +/* PMIC GPIO Types */ +#define INT3472_GPIO_TYPE_RESET 0x00 +#define INT3472_GPIO_TYPE_POWERDOWN 0x01 +#define INT3472_GPIO_TYPE_POWER_ENABLE 0x0b +#define INT3472_GPIO_TYPE_CLK_ENABLE 0x0c +#define INT3472_GPIO_TYPE_PRIVACY_LED 0x0d + +#define INT3472_PDEV_MAX_NAME_LEN 23 +#define INT3472_MAX_SENSOR_GPIOS 3 + +#define GPIO_REGULATOR_NAME_LENGTH 21 +#define GPIO_REGULATOR_SUPPLY_NAME_LENGTH 9 + +#define CIO2_SENSOR_SSDB_MCLKSPEED_OFFSET 86 + +#define INT3472_REGULATOR(_name, _supply, _ops) \ + (const struct regulator_desc) { \ + .name = _name, \ + .supply_name = _supply, \ + .type = REGULATOR_VOLTAGE, \ + .ops = _ops, \ + .owner = THIS_MODULE, \ + } + +#define to_int3472_clk(hw) \ + container_of(hw, struct int3472_gpio_clock, clk_hw) + +#define to_int3472_device(clk) \ + container_of(clk, struct int3472_discrete_device, clock) + +struct acpi_device; +struct i2c_client; +struct platform_device; + +struct int3472_cldb { + u8 version; + /* + * control logic type + * 0: UNKNOWN + * 1: DISCRETE(CRD-D) + * 2: PMIC TPS68470 + * 3: PMIC uP6641 + */ + u8 control_logic_type; + u8 control_logic_id; + u8 sensor_card_sku; + u8 reserved[28]; +}; + +struct int3472_gpio_function_remap { + const char *documented; + const char *actual; +}; + +struct int3472_sensor_config { + const char *sensor_module_name; + struct regulator_consumer_supply supply_map; + const struct int3472_gpio_function_remap *function_maps; +}; + +struct int3472_discrete_device { + struct acpi_device *adev; + struct device *dev; + struct acpi_device *sensor; + const char *sensor_name; + + const struct int3472_sensor_config *sensor_config; + + struct int3472_gpio_regulator { + char regulator_name[GPIO_REGULATOR_NAME_LENGTH]; + char supply_name[GPIO_REGULATOR_SUPPLY_NAME_LENGTH]; + struct gpio_desc *gpio; + struct regulator_dev *rdev; + struct regulator_desc rdesc; + } regulator; + + struct int3472_gpio_clock { + struct clk *clk; + struct clk_hw clk_hw; + struct clk_lookup *cl; + struct gpio_desc *ena_gpio; + struct gpio_desc *led_gpio; + u32 frequency; + } clock; + + unsigned int ngpios; /* how many GPIOs have we seen */ + unsigned int n_sensor_gpios; /* how many have we mapped to sensor */ + struct gpiod_lookup_table gpios; +}; + +union acpi_object *skl_int3472_get_acpi_buffer(struct acpi_device *adev, + char *id); +int skl_int3472_fill_cldb(struct acpi_device *adev, struct int3472_cldb *cldb); +int skl_int3472_get_sensor_adev_and_name(struct device *dev, + struct acpi_device **sensor_adev_ret, + const char **name_ret); + +int skl_int3472_register_clock(struct int3472_discrete_device *int3472); +void skl_int3472_unregister_clock(struct int3472_discrete_device *int3472); + +int skl_int3472_register_regulator(struct int3472_discrete_device *int3472, + struct acpi_resource_gpio *agpio); +void skl_int3472_unregister_regulator(struct int3472_discrete_device *int3472); + +#endif diff --git a/drivers/platform/x86/intel/int3472/discrete.c b/drivers/platform/x86/intel/int3472/discrete.c new file mode 100644 index 000000000..c42c3faa2 --- /dev/null +++ b/drivers/platform/x86/intel/int3472/discrete.c @@ -0,0 +1,423 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Author: Dan Scally <djrscally@gmail.com> */ + +#include <linux/acpi.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio/machine.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/overflow.h> +#include <linux/platform_device.h> +#include <linux/uuid.h> + +#include "common.h" + +/* + * 79234640-9e10-4fea-a5c1-b5aa8b19756f + * This _DSM GUID returns information about the GPIO lines mapped to a + * discrete INT3472 device. Function number 1 returns a count of the GPIO + * lines that are mapped. Subsequent functions return 32 bit ints encoding + * information about the GPIO line, including its purpose. + */ +static const guid_t int3472_gpio_guid = + GUID_INIT(0x79234640, 0x9e10, 0x4fea, + 0xa5, 0xc1, 0xb5, 0xaa, 0x8b, 0x19, 0x75, 0x6f); + +/* + * 822ace8f-2814-4174-a56b-5f029fe079ee + * This _DSM GUID returns a string from the sensor device, which acts as a + * module identifier. + */ +static const guid_t cio2_sensor_module_guid = + GUID_INIT(0x822ace8f, 0x2814, 0x4174, + 0xa5, 0x6b, 0x5f, 0x02, 0x9f, 0xe0, 0x79, 0xee); + +/* + * Here follows platform specific mapping information that we can pass to + * the functions mapping resources to the sensors. Where the sensors have + * a power enable pin defined in DSDT we need to provide a supply name so + * the sensor drivers can find the regulator. The device name will be derived + * from the sensor's ACPI device within the code. Optionally, we can provide a + * NULL terminated array of function name mappings to deal with any platform + * specific deviations from the documented behaviour of GPIOs. + * + * Map a GPIO function name to NULL to prevent the driver from mapping that + * GPIO at all. + */ + +static const struct int3472_gpio_function_remap ov2680_gpio_function_remaps[] = { + { "reset", NULL }, + { "powerdown", "reset" }, + { } +}; + +static const struct int3472_sensor_config int3472_sensor_configs[] = { + /* Lenovo Miix 510-12ISK - OV2680, Front */ + { "GNDF140809R", { 0 }, ov2680_gpio_function_remaps }, + /* Lenovo Miix 510-12ISK - OV5648, Rear */ + { "GEFF150023R", REGULATOR_SUPPLY("avdd", NULL), NULL }, + /* Surface Go 1&2 - OV5693, Front */ + { "YHCU", REGULATOR_SUPPLY("avdd", NULL), NULL }, +}; + +static const struct int3472_sensor_config * +skl_int3472_get_sensor_module_config(struct int3472_discrete_device *int3472) +{ + union acpi_object *obj; + unsigned int i; + + obj = acpi_evaluate_dsm_typed(int3472->sensor->handle, + &cio2_sensor_module_guid, 0x00, + 0x01, NULL, ACPI_TYPE_STRING); + + if (!obj) { + dev_err(int3472->dev, + "Failed to get sensor module string from _DSM\n"); + return ERR_PTR(-ENODEV); + } + + if (obj->string.type != ACPI_TYPE_STRING) { + dev_err(int3472->dev, + "Sensor _DSM returned a non-string value\n"); + + ACPI_FREE(obj); + return ERR_PTR(-EINVAL); + } + + for (i = 0; i < ARRAY_SIZE(int3472_sensor_configs); i++) { + if (!strcmp(int3472_sensor_configs[i].sensor_module_name, + obj->string.pointer)) + break; + } + + ACPI_FREE(obj); + + if (i >= ARRAY_SIZE(int3472_sensor_configs)) + return ERR_PTR(-EINVAL); + + return &int3472_sensor_configs[i]; +} + +static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int3472, + struct acpi_resource_gpio *agpio, + const char *func, u32 polarity) +{ + const struct int3472_sensor_config *sensor_config; + char *path = agpio->resource_source.string_ptr; + struct gpiod_lookup *table_entry; + struct acpi_device *adev; + acpi_handle handle; + acpi_status status; + + if (int3472->n_sensor_gpios >= INT3472_MAX_SENSOR_GPIOS) { + dev_warn(int3472->dev, "Too many GPIOs mapped\n"); + return -EINVAL; + } + + sensor_config = int3472->sensor_config; + if (!IS_ERR(sensor_config) && sensor_config->function_maps) { + const struct int3472_gpio_function_remap *remap; + + for (remap = sensor_config->function_maps; remap->documented; remap++) { + if (!strcmp(func, remap->documented)) { + func = remap->actual; + break; + } + } + } + + /* Functions mapped to NULL should not be mapped to the sensor */ + if (!func) + return 0; + + status = acpi_get_handle(NULL, path, &handle); + if (ACPI_FAILURE(status)) + return -EINVAL; + + adev = acpi_fetch_acpi_dev(handle); + if (!adev) + return -ENODEV; + + table_entry = &int3472->gpios.table[int3472->n_sensor_gpios]; + table_entry->key = acpi_dev_name(adev); + table_entry->chip_hwnum = agpio->pin_table[0]; + table_entry->con_id = func; + table_entry->idx = 0; + table_entry->flags = polarity; + + int3472->n_sensor_gpios++; + + return 0; +} + +static int skl_int3472_map_gpio_to_clk(struct int3472_discrete_device *int3472, + struct acpi_resource_gpio *agpio, u8 type) +{ + char *path = agpio->resource_source.string_ptr; + u16 pin = agpio->pin_table[0]; + struct gpio_desc *gpio; + + switch (type) { + case INT3472_GPIO_TYPE_CLK_ENABLE: + gpio = acpi_get_and_request_gpiod(path, pin, "int3472,clk-enable"); + if (IS_ERR(gpio)) + return (PTR_ERR(gpio)); + + int3472->clock.ena_gpio = gpio; + /* Ensure the pin is in output mode and non-active state */ + gpiod_direction_output(int3472->clock.ena_gpio, 0); + break; + case INT3472_GPIO_TYPE_PRIVACY_LED: + gpio = acpi_get_and_request_gpiod(path, pin, "int3472,privacy-led"); + if (IS_ERR(gpio)) + return (PTR_ERR(gpio)); + + int3472->clock.led_gpio = gpio; + /* Ensure the pin is in output mode and non-active state */ + gpiod_direction_output(int3472->clock.led_gpio, 0); + break; + default: + dev_err(int3472->dev, "Invalid GPIO type 0x%02x for clock\n", type); + break; + } + + return 0; +} + +/** + * skl_int3472_handle_gpio_resources: Map PMIC resources to consuming sensor + * @ares: A pointer to a &struct acpi_resource + * @data: A pointer to a &struct int3472_discrete_device + * + * This function handles GPIO resources that are against an INT3472 + * ACPI device, by checking the value of the corresponding _DSM entry. + * This will return a 32bit int, where the lowest byte represents the + * function of the GPIO pin: + * + * 0x00 Reset + * 0x01 Power down + * 0x0b Power enable + * 0x0c Clock enable + * 0x0d Privacy LED + * + * There are some known platform specific quirks where that does not quite + * hold up; for example where a pin with type 0x01 (Power down) is mapped to + * a sensor pin that performs a reset function or entries in _CRS and _DSM that + * do not actually correspond to a physical connection. These will be handled + * by the mapping sub-functions. + * + * GPIOs will either be mapped directly to the sensor device or else used + * to create clocks and regulators via the usual frameworks. + * + * Return: + * * 1 - To continue the loop + * * 0 - When all resources found are handled properly. + * * -EINVAL - If the resource is not a GPIO IO resource + * * -ENODEV - If the resource has no corresponding _DSM entry + * * -Other - Errors propagated from one of the sub-functions. + */ +static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, + void *data) +{ + struct int3472_discrete_device *int3472 = data; + struct acpi_resource_gpio *agpio; + union acpi_object *obj; + const char *err_msg; + int ret; + u8 type; + + if (!acpi_gpio_get_io_resource(ares, &agpio)) + return 1; + + /* + * ngpios + 2 because the index of this _DSM function is 1-based and + * the first function is just a count. + */ + obj = acpi_evaluate_dsm_typed(int3472->adev->handle, + &int3472_gpio_guid, 0x00, + int3472->ngpios + 2, + NULL, ACPI_TYPE_INTEGER); + + if (!obj) { + dev_warn(int3472->dev, "No _DSM entry for GPIO pin %u\n", + agpio->pin_table[0]); + return 1; + } + + type = obj->integer.value & 0xff; + + switch (type) { + case INT3472_GPIO_TYPE_RESET: + ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, "reset", + GPIO_ACTIVE_LOW); + if (ret) + err_msg = "Failed to map reset pin to sensor\n"; + + break; + case INT3472_GPIO_TYPE_POWERDOWN: + ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, "powerdown", + GPIO_ACTIVE_LOW); + if (ret) + err_msg = "Failed to map powerdown pin to sensor\n"; + + break; + case INT3472_GPIO_TYPE_CLK_ENABLE: + case INT3472_GPIO_TYPE_PRIVACY_LED: + ret = skl_int3472_map_gpio_to_clk(int3472, agpio, type); + if (ret) + err_msg = "Failed to map GPIO to clock\n"; + + break; + case INT3472_GPIO_TYPE_POWER_ENABLE: + ret = skl_int3472_register_regulator(int3472, agpio); + if (ret) + err_msg = "Failed to map regulator to sensor\n"; + + break; + default: + dev_warn(int3472->dev, + "GPIO type 0x%02x unknown; the sensor may not work\n", + type); + ret = 1; + break; + } + + int3472->ngpios++; + ACPI_FREE(obj); + + if (ret < 0) + return dev_err_probe(int3472->dev, ret, err_msg); + + return ret; +} + +static int skl_int3472_parse_crs(struct int3472_discrete_device *int3472) +{ + LIST_HEAD(resource_list); + int ret; + + /* + * No error check, because not having a sensor config is not necessarily + * a failure mode. + */ + int3472->sensor_config = skl_int3472_get_sensor_module_config(int3472); + + ret = acpi_dev_get_resources(int3472->adev, &resource_list, + skl_int3472_handle_gpio_resources, + int3472); + if (ret < 0) + return ret; + + acpi_dev_free_resource_list(&resource_list); + + /* + * If we find no clock enable GPIO pin then the privacy LED won't work. + * We've never seen that situation, but it's possible. Warn the user so + * it's clear what's happened. + */ + if (int3472->clock.ena_gpio) { + ret = skl_int3472_register_clock(int3472); + if (ret) + return ret; + } else { + if (int3472->clock.led_gpio) + dev_warn(int3472->dev, + "No clk GPIO. The privacy LED won't work\n"); + } + + int3472->gpios.dev_id = int3472->sensor_name; + gpiod_add_lookup_table(&int3472->gpios); + + return 0; +} + +static int skl_int3472_discrete_remove(struct platform_device *pdev) +{ + struct int3472_discrete_device *int3472 = platform_get_drvdata(pdev); + + gpiod_remove_lookup_table(&int3472->gpios); + + if (int3472->clock.cl) + skl_int3472_unregister_clock(int3472); + + gpiod_put(int3472->clock.ena_gpio); + gpiod_put(int3472->clock.led_gpio); + + skl_int3472_unregister_regulator(int3472); + + return 0; +} + +static int skl_int3472_discrete_probe(struct platform_device *pdev) +{ + struct acpi_device *adev = ACPI_COMPANION(&pdev->dev); + struct int3472_discrete_device *int3472; + struct int3472_cldb cldb; + int ret; + + ret = skl_int3472_fill_cldb(adev, &cldb); + if (ret) { + dev_err(&pdev->dev, "Couldn't fill CLDB structure\n"); + return ret; + } + + if (cldb.control_logic_type != 1) { + dev_err(&pdev->dev, "Unsupported control logic type %u\n", + cldb.control_logic_type); + return -EINVAL; + } + + /* Max num GPIOs we've seen plus a terminator */ + int3472 = devm_kzalloc(&pdev->dev, struct_size(int3472, gpios.table, + INT3472_MAX_SENSOR_GPIOS + 1), GFP_KERNEL); + if (!int3472) + return -ENOMEM; + + int3472->adev = adev; + int3472->dev = &pdev->dev; + platform_set_drvdata(pdev, int3472); + + ret = skl_int3472_get_sensor_adev_and_name(&pdev->dev, &int3472->sensor, + &int3472->sensor_name); + if (ret) + return ret; + + /* + * Initialising this list means we can call gpiod_remove_lookup_table() + * in failure paths without issue. + */ + INIT_LIST_HEAD(&int3472->gpios.list); + + ret = skl_int3472_parse_crs(int3472); + if (ret) { + skl_int3472_discrete_remove(pdev); + return ret; + } + + acpi_dev_clear_dependencies(adev); + return 0; +} + +static const struct acpi_device_id int3472_device_id[] = { + { "INT3472", 0 }, + { } +}; +MODULE_DEVICE_TABLE(acpi, int3472_device_id); + +static struct platform_driver int3472_discrete = { + .driver = { + .name = "int3472-discrete", + .acpi_match_table = int3472_device_id, + }, + .probe = skl_int3472_discrete_probe, + .remove = skl_int3472_discrete_remove, +}; +module_platform_driver(int3472_discrete); + +MODULE_DESCRIPTION("Intel SkyLake INT3472 ACPI Discrete Device Driver"); +MODULE_AUTHOR("Daniel Scally <djrscally@gmail.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/platform/x86/intel/int3472/tps68470.c b/drivers/platform/x86/intel/int3472/tps68470.c new file mode 100644 index 000000000..5b8d1a962 --- /dev/null +++ b/drivers/platform/x86/intel/int3472/tps68470.c @@ -0,0 +1,261 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Author: Dan Scally <djrscally@gmail.com> */ + +#include <linux/acpi.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/mfd/core.h> +#include <linux/mfd/tps68470.h> +#include <linux/platform_device.h> +#include <linux/platform_data/tps68470.h> +#include <linux/regmap.h> +#include <linux/string.h> + +#include "common.h" +#include "tps68470.h" + +#define DESIGNED_FOR_CHROMEOS 1 +#define DESIGNED_FOR_WINDOWS 2 + +#define TPS68470_WIN_MFD_CELL_COUNT 3 + +static const struct mfd_cell tps68470_cros[] = { + { .name = "tps68470-gpio" }, + { .name = "tps68470_pmic_opregion" }, +}; + +static const struct regmap_config tps68470_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = TPS68470_REG_MAX, +}; + +static int tps68470_chip_init(struct device *dev, struct regmap *regmap) +{ + unsigned int version; + int ret; + + /* Force software reset */ + ret = regmap_write(regmap, TPS68470_REG_RESET, TPS68470_REG_RESET_MASK); + if (ret) + return ret; + + ret = regmap_read(regmap, TPS68470_REG_REVID, &version); + if (ret) { + dev_err(dev, "Failed to read revision register: %d\n", ret); + return ret; + } + + dev_info(dev, "TPS68470 REVID: 0x%02x\n", version); + + return 0; +} + +/** skl_int3472_tps68470_calc_type: Check what platform a device is designed for + * @adev: A pointer to a &struct acpi_device + * + * Check CLDB buffer against the PMIC's adev. If present, then we check + * the value of control_logic_type field and follow one of the + * following scenarios: + * + * 1. No CLDB - likely ACPI tables designed for ChromeOS. We + * create platform devices for the GPIOs and OpRegion drivers. + * + * 2. CLDB, with control_logic_type = 2 - probably ACPI tables + * made for Windows 2-in-1 platforms. Register pdevs for GPIO, + * Clock and Regulator drivers to bind to. + * + * 3. Any other value in control_logic_type, we should never have + * gotten to this point; fail probe and return. + * + * Return: + * * 1 Device intended for ChromeOS + * * 2 Device intended for Windows + * * -EINVAL Where @adev has an object named CLDB but it does not conform to + * our expectations + */ +static int skl_int3472_tps68470_calc_type(struct acpi_device *adev) +{ + struct int3472_cldb cldb = { 0 }; + int ret; + + /* + * A CLDB buffer that exists, but which does not match our expectations + * should trigger an error so we don't blindly continue. + */ + ret = skl_int3472_fill_cldb(adev, &cldb); + if (ret && ret != -ENODEV) + return ret; + + if (ret) + return DESIGNED_FOR_CHROMEOS; + + if (cldb.control_logic_type != 2) + return -EINVAL; + + return DESIGNED_FOR_WINDOWS; +} + +/* + * Return the size of the flexible array member, because we'll need that later + * on to pass .pdata_size to cells. + */ +static int +skl_int3472_fill_clk_pdata(struct device *dev, struct tps68470_clk_platform_data **clk_pdata) +{ + struct acpi_device *adev = ACPI_COMPANION(dev); + struct acpi_device *consumer; + unsigned int n_consumers = 0; + const char *sensor_name; + unsigned int i = 0; + + for_each_acpi_consumer_dev(adev, consumer) + n_consumers++; + + if (!n_consumers) { + dev_err(dev, "INT3472 seems to have no dependents\n"); + return -ENODEV; + } + + *clk_pdata = devm_kzalloc(dev, struct_size(*clk_pdata, consumers, n_consumers), + GFP_KERNEL); + if (!*clk_pdata) + return -ENOMEM; + + (*clk_pdata)->n_consumers = n_consumers; + i = 0; + + for_each_acpi_consumer_dev(adev, consumer) { + sensor_name = devm_kasprintf(dev, GFP_KERNEL, I2C_DEV_NAME_FORMAT, + acpi_dev_name(consumer)); + if (!sensor_name) { + acpi_dev_put(consumer); + return -ENOMEM; + } + + (*clk_pdata)->consumers[i].consumer_dev_name = sensor_name; + i++; + } + + return n_consumers; +} + +static int skl_int3472_tps68470_probe(struct i2c_client *client) +{ + struct acpi_device *adev = ACPI_COMPANION(&client->dev); + const struct int3472_tps68470_board_data *board_data; + struct tps68470_clk_platform_data *clk_pdata; + struct mfd_cell *cells; + struct regmap *regmap; + int n_consumers; + int device_type; + int ret; + int i; + + n_consumers = skl_int3472_fill_clk_pdata(&client->dev, &clk_pdata); + if (n_consumers < 0) + return n_consumers; + + regmap = devm_regmap_init_i2c(client, &tps68470_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "Failed to create regmap: %ld\n", PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + + i2c_set_clientdata(client, regmap); + + ret = tps68470_chip_init(&client->dev, regmap); + if (ret < 0) { + dev_err(&client->dev, "TPS68470 init error %d\n", ret); + return ret; + } + + device_type = skl_int3472_tps68470_calc_type(adev); + switch (device_type) { + case DESIGNED_FOR_WINDOWS: + board_data = int3472_tps68470_get_board_data(dev_name(&client->dev)); + if (!board_data) + return dev_err_probe(&client->dev, -ENODEV, "No board-data found for this model\n"); + + cells = kcalloc(TPS68470_WIN_MFD_CELL_COUNT, sizeof(*cells), GFP_KERNEL); + if (!cells) + return -ENOMEM; + + /* + * The order of the cells matters here! The clk must be first + * because the regulator depends on it. The gpios must be last, + * acpi_gpiochip_add() calls acpi_dev_clear_dependencies() and + * the clk + regulators must be ready when this happens. + */ + cells[0].name = "tps68470-clk"; + cells[0].platform_data = clk_pdata; + cells[0].pdata_size = struct_size(clk_pdata, consumers, n_consumers); + cells[1].name = "tps68470-regulator"; + cells[1].platform_data = (void *)board_data->tps68470_regulator_pdata; + cells[1].pdata_size = sizeof(struct tps68470_regulator_platform_data); + cells[2].name = "tps68470-gpio"; + + for (i = 0; i < board_data->n_gpiod_lookups; i++) + gpiod_add_lookup_table(board_data->tps68470_gpio_lookup_tables[i]); + + ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE, + cells, TPS68470_WIN_MFD_CELL_COUNT, + NULL, 0, NULL); + kfree(cells); + + if (ret) { + for (i = 0; i < board_data->n_gpiod_lookups; i++) + gpiod_remove_lookup_table(board_data->tps68470_gpio_lookup_tables[i]); + } + + break; + case DESIGNED_FOR_CHROMEOS: + ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE, + tps68470_cros, ARRAY_SIZE(tps68470_cros), + NULL, 0, NULL); + break; + default: + dev_err(&client->dev, "Failed to add MFD devices\n"); + return device_type; + } + + /* + * No acpi_dev_clear_dependencies() here, since the acpi_gpiochip_add() + * for the GPIO cell already does this. + */ + + return ret; +} + +static void skl_int3472_tps68470_remove(struct i2c_client *client) +{ + const struct int3472_tps68470_board_data *board_data; + int i; + + board_data = int3472_tps68470_get_board_data(dev_name(&client->dev)); + if (board_data) { + for (i = 0; i < board_data->n_gpiod_lookups; i++) + gpiod_remove_lookup_table(board_data->tps68470_gpio_lookup_tables[i]); + } +} + +static const struct acpi_device_id int3472_device_id[] = { + { "INT3472", 0 }, + { } +}; +MODULE_DEVICE_TABLE(acpi, int3472_device_id); + +static struct i2c_driver int3472_tps68470 = { + .driver = { + .name = "int3472-tps68470", + .acpi_match_table = int3472_device_id, + }, + .probe_new = skl_int3472_tps68470_probe, + .remove = skl_int3472_tps68470_remove, +}; +module_i2c_driver(int3472_tps68470); + +MODULE_DESCRIPTION("Intel SkyLake INT3472 ACPI TPS68470 Device Driver"); +MODULE_AUTHOR("Daniel Scally <djrscally@gmail.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_SOFTDEP("pre: clk-tps68470 tps68470-regulator"); diff --git a/drivers/platform/x86/intel/int3472/tps68470.h b/drivers/platform/x86/intel/int3472/tps68470.h new file mode 100644 index 000000000..35915e701 --- /dev/null +++ b/drivers/platform/x86/intel/int3472/tps68470.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * TI TPS68470 PMIC platform data definition. + * + * Copyright (c) 2021 Red Hat Inc. + * + * Red Hat authors: + * Hans de Goede <hdegoede@redhat.com> + */ + +#ifndef _INTEL_SKL_INT3472_TPS68470_H +#define _INTEL_SKL_INT3472_TPS68470_H + +struct gpiod_lookup_table; +struct tps68470_regulator_platform_data; + +struct int3472_tps68470_board_data { + const char *dev_name; + const struct tps68470_regulator_platform_data *tps68470_regulator_pdata; + unsigned int n_gpiod_lookups; + struct gpiod_lookup_table *tps68470_gpio_lookup_tables[]; +}; + +const struct int3472_tps68470_board_data *int3472_tps68470_get_board_data(const char *dev_name); + +#endif diff --git a/drivers/platform/x86/intel/int3472/tps68470_board_data.c b/drivers/platform/x86/intel/int3472/tps68470_board_data.c new file mode 100644 index 000000000..322237e05 --- /dev/null +++ b/drivers/platform/x86/intel/int3472/tps68470_board_data.c @@ -0,0 +1,208 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * TI TPS68470 PMIC platform data definition. + * + * Copyright (c) 2021 Dan Scally <djrscally@gmail.com> + * Copyright (c) 2021 Red Hat Inc. + * + * Red Hat authors: + * Hans de Goede <hdegoede@redhat.com> + */ + +#include <linux/dmi.h> +#include <linux/gpio/machine.h> +#include <linux/platform_data/tps68470.h> +#include <linux/regulator/machine.h> +#include "tps68470.h" + +static struct regulator_consumer_supply int347a_core_consumer_supplies[] = { + REGULATOR_SUPPLY("dvdd", "i2c-INT347A:00"), +}; + +static struct regulator_consumer_supply int347a_ana_consumer_supplies[] = { + REGULATOR_SUPPLY("avdd", "i2c-INT347A:00"), +}; + +static struct regulator_consumer_supply int347a_vcm_consumer_supplies[] = { + REGULATOR_SUPPLY("vdd", "i2c-INT347A:00-VCM"), +}; + +static struct regulator_consumer_supply int347a_vsio_consumer_supplies[] = { + REGULATOR_SUPPLY("dovdd", "i2c-INT347A:00"), + REGULATOR_SUPPLY("vsio", "i2c-INT347A:00-VCM"), + REGULATOR_SUPPLY("vddd", "i2c-INT347E:00"), +}; + +static struct regulator_consumer_supply int347a_aux1_consumer_supplies[] = { + REGULATOR_SUPPLY("vdda", "i2c-INT347E:00"), +}; + +static struct regulator_consumer_supply int347a_aux2_consumer_supplies[] = { + REGULATOR_SUPPLY("vdddo", "i2c-INT347E:00"), +}; + +static const struct regulator_init_data surface_go_tps68470_core_reg_init_data = { + .constraints = { + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = true, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(int347a_core_consumer_supplies), + .consumer_supplies = int347a_core_consumer_supplies, +}; + +static const struct regulator_init_data surface_go_tps68470_ana_reg_init_data = { + .constraints = { + .min_uV = 2815200, + .max_uV = 2815200, + .apply_uV = true, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(int347a_ana_consumer_supplies), + .consumer_supplies = int347a_ana_consumer_supplies, +}; + +static const struct regulator_init_data surface_go_tps68470_vcm_reg_init_data = { + .constraints = { + .min_uV = 2815200, + .max_uV = 2815200, + .apply_uV = true, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(int347a_vcm_consumer_supplies), + .consumer_supplies = int347a_vcm_consumer_supplies, +}; + +/* Ensure the always-on VIO regulator has the same voltage as VSIO */ +static const struct regulator_init_data surface_go_tps68470_vio_reg_init_data = { + .constraints = { + .min_uV = 1800600, + .max_uV = 1800600, + .apply_uV = true, + .always_on = true, + }, +}; + +static const struct regulator_init_data surface_go_tps68470_vsio_reg_init_data = { + .constraints = { + .min_uV = 1800600, + .max_uV = 1800600, + .apply_uV = true, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(int347a_vsio_consumer_supplies), + .consumer_supplies = int347a_vsio_consumer_supplies, +}; + +static const struct regulator_init_data surface_go_tps68470_aux1_reg_init_data = { + .constraints = { + .min_uV = 2815200, + .max_uV = 2815200, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(int347a_aux1_consumer_supplies), + .consumer_supplies = int347a_aux1_consumer_supplies, +}; + +static const struct regulator_init_data surface_go_tps68470_aux2_reg_init_data = { + .constraints = { + .min_uV = 1800600, + .max_uV = 1800600, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(int347a_aux2_consumer_supplies), + .consumer_supplies = int347a_aux2_consumer_supplies, +}; + +static const struct tps68470_regulator_platform_data surface_go_tps68470_pdata = { + .reg_init_data = { + [TPS68470_CORE] = &surface_go_tps68470_core_reg_init_data, + [TPS68470_ANA] = &surface_go_tps68470_ana_reg_init_data, + [TPS68470_VCM] = &surface_go_tps68470_vcm_reg_init_data, + [TPS68470_VIO] = &surface_go_tps68470_vio_reg_init_data, + [TPS68470_VSIO] = &surface_go_tps68470_vsio_reg_init_data, + [TPS68470_AUX1] = &surface_go_tps68470_aux1_reg_init_data, + [TPS68470_AUX2] = &surface_go_tps68470_aux2_reg_init_data, + }, +}; + +static struct gpiod_lookup_table surface_go_int347a_gpios = { + .dev_id = "i2c-INT347A:00", + .table = { + GPIO_LOOKUP("tps68470-gpio", 9, "reset", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("tps68470-gpio", 7, "powerdown", GPIO_ACTIVE_LOW), + { } + } +}; + +static struct gpiod_lookup_table surface_go_int347e_gpios = { + .dev_id = "i2c-INT347E:00", + .table = { + GPIO_LOOKUP("tps68470-gpio", 5, "enable", GPIO_ACTIVE_HIGH), + { } + } +}; + +static const struct int3472_tps68470_board_data surface_go_tps68470_board_data = { + .dev_name = "i2c-INT3472:05", + .tps68470_regulator_pdata = &surface_go_tps68470_pdata, + .n_gpiod_lookups = 2, + .tps68470_gpio_lookup_tables = { + &surface_go_int347a_gpios, + &surface_go_int347e_gpios, + }, +}; + +static const struct int3472_tps68470_board_data surface_go3_tps68470_board_data = { + .dev_name = "i2c-INT3472:01", + .tps68470_regulator_pdata = &surface_go_tps68470_pdata, + .n_gpiod_lookups = 2, + .tps68470_gpio_lookup_tables = { + &surface_go_int347a_gpios, + &surface_go_int347e_gpios, + }, +}; + +static const struct dmi_system_id int3472_tps68470_board_data_table[] = { + { + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Go"), + }, + .driver_data = (void *)&surface_go_tps68470_board_data, + }, + { + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Go 2"), + }, + .driver_data = (void *)&surface_go_tps68470_board_data, + }, + { + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Go 3"), + }, + .driver_data = (void *)&surface_go3_tps68470_board_data, + }, + { } +}; + +const struct int3472_tps68470_board_data *int3472_tps68470_get_board_data(const char *dev_name) +{ + const struct int3472_tps68470_board_data *board_data; + const struct dmi_system_id *match; + + for (match = dmi_first_match(int3472_tps68470_board_data_table); + match; + match = dmi_first_match(match + 1)) { + board_data = match->driver_data; + if (strcmp(board_data->dev_name, dev_name) == 0) + return board_data; + } + + return NULL; +} |