diff options
Diffstat (limited to 'drivers/platform/x86/intel')
75 files changed, 17347 insertions, 0 deletions
diff --git a/drivers/platform/x86/intel/Kconfig b/drivers/platform/x86/intel/Kconfig new file mode 100644 index 000000000..794968bda --- /dev/null +++ b/drivers/platform/x86/intel/Kconfig @@ -0,0 +1,205 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Intel x86 Platform Specific Drivers +# + +source "drivers/platform/x86/intel/atomisp2/Kconfig" +source "drivers/platform/x86/intel/ifs/Kconfig" +source "drivers/platform/x86/intel/int1092/Kconfig" +source "drivers/platform/x86/intel/int3472/Kconfig" +source "drivers/platform/x86/intel/pmc/Kconfig" +source "drivers/platform/x86/intel/pmt/Kconfig" +source "drivers/platform/x86/intel/speed_select_if/Kconfig" +source "drivers/platform/x86/intel/telemetry/Kconfig" +source "drivers/platform/x86/intel/wmi/Kconfig" +source "drivers/platform/x86/intel/uncore-frequency/Kconfig" + + +config INTEL_HID_EVENT + tristate "Intel HID Event" + depends on ACPI + depends on INPUT + depends on I2C + select INPUT_SPARSEKMAP + help + This driver provides support for the Intel HID Event hotkey interface. + Some laptops require this driver for hotkey support. + + To compile this driver as a module, choose M here: the module will + be called intel_hid. + +config INTEL_VBTN + tristate "Intel Virtual Button" + depends on ACPI + depends on INPUT + depends on I2C + select INPUT_SPARSEKMAP + help + This driver provides support for the Intel Virtual Button interface. + Some laptops require this driver for power button support. + + To compile this driver as a module, choose M here: the module will + be called intel_vbtn. + +config INTEL_INT0002_VGPIO + tristate "Intel ACPI INT0002 Virtual GPIO driver" + depends on GPIOLIB && ACPI && PM_SLEEP + select GPIOLIB_IRQCHIP + help + Some peripherals on Bay Trail and Cherry Trail platforms signal a + Power Management Event (PME) to the Power Management Controller (PMC) + to wakeup the system. When this happens software needs to explicitly + clear the PME bus 0 status bit in the GPE0a_STS register to avoid an + IRQ storm on IRQ 9. + + This is modelled in ACPI through the INT0002 ACPI device, which is + called a "Virtual GPIO controller" in ACPI because it defines the + event handler to call when the PME triggers through _AEI and _L02 + methods as would be done for a real GPIO interrupt in ACPI. + + To compile this driver as a module, choose M here: the module will + be called intel_int0002_vgpio. + +config INTEL_OAKTRAIL + tristate "Intel Oaktrail Platform Extras" + depends on ACPI + depends on ACPI_VIDEO || ACPI_VIDEO=n + depends on RFKILL && BACKLIGHT_CLASS_DEVICE && ACPI + help + Intel Oaktrail platform need this driver to provide interfaces to + enable/disable the Camera, WiFi, BT etc. devices. If in doubt, say Y + here; it will only load on supported platforms. + +config INTEL_BXTWC_PMIC_TMU + tristate "Intel Broxton Whiskey Cove TMU Driver" + depends on INTEL_SOC_PMIC_BXTWC + depends on MFD_INTEL_PMC_BXT + select REGMAP + help + Select this driver to use Intel Broxton Whiskey Cove PMIC TMU feature. + This driver enables the alarm wakeup functionality in the TMU unit of + Whiskey Cove PMIC. + +config INTEL_CHTDC_TI_PWRBTN + tristate "Intel Cherry Trail Dollar Cove TI power button driver" + depends on INTEL_SOC_PMIC_CHTDC_TI + depends on INPUT + help + This option adds a power button driver for Dollar Cove TI + PMIC on Intel Cherry Trail devices. + + To compile this driver as a module, choose M here: the module + will be called intel_chtdc_ti_pwrbtn. + +config INTEL_CHTWC_INT33FE + tristate "Intel Cherry Trail Whiskey Cove ACPI INT33FE Driver" + depends on X86 && ACPI && I2C && REGULATOR + depends on CHARGER_BQ24190=y || (CHARGER_BQ24190=m && m) + depends on USB_ROLES_INTEL_XHCI=y || (USB_ROLES_INTEL_XHCI=m && m) + depends on TYPEC_MUX_PI3USB30532=y || (TYPEC_MUX_PI3USB30532=m && m) + help + This driver add support for the Intel Cherry Trail Whiskey Cove + INT33FE ACPI device found on the GPD win and the GPD pocket. + + The INT33FE ACPI device on these mini laptops contains I2cSerialBusV2 + resources for a MAX17042 Fuel Gauge, FUSB302 USB Type-C Controller + and PI3USB30532 USB switch. + This driver instantiates i2c-clients for these, so that standard + i2c drivers for these chips can bind to the them. + + If you enable this driver it is advised to also select + CONFIG_TYPEC_FUSB302=m, CONFIG_TYPEC_MUX_PI3USB30532=m and + CONFIG_BATTERY_MAX17042=m. + +config INTEL_ISHTP_ECLITE + tristate "Intel ISHTP eclite controller Driver" + depends on INTEL_ISH_HID + depends on ACPI + help + This driver is for accessing the PSE (Programmable Service Engine) - + an Embedded Controller like IP - using ISHTP (Integrated Sensor Hub + Transport Protocol) to get battery, thermal and UCSI (USB Type-C + Connector System Software Interface) related data from the platform. + Users who don't want to use discrete Embedded Controller on Intel's + Elkhartlake platform can leverage this integrated solution of + ECLite which is part of PSE subsystem. + + To compile this driver as a module, choose M here: the module + will be called intel_ishtp_eclite. + +config INTEL_MRFLD_PWRBTN + tristate "Intel Merrifield Basin Cove power button driver" + depends on INTEL_SOC_PMIC_MRFLD + depends on INPUT + help + This option adds a power button driver for Basin Cove PMIC + on Intel Merrifield devices. + + To compile this driver as a module, choose M here: the module + will be called intel_mrfld_pwrbtn. + +config INTEL_PUNIT_IPC + tristate "Intel P-Unit IPC Driver" + help + This driver provides support for Intel P-Unit Mailbox IPC mechanism, + which is used to bridge the communications between kernel and P-Unit. + +config INTEL_RST + tristate "Intel Rapid Start Technology Driver" + depends on ACPI + help + This driver provides support for modifying parameters on systems + equipped with Intel's Rapid Start Technology. When put in an ACPI + sleep state, these devices will wake after either a configured + timeout or when the system battery reaches a critical state, + automatically copying memory contents to disk. On resume, the + firmware will copy the memory contents back to RAM and resume the OS + as usual. + +config INTEL_SDSI + tristate "Intel Software Defined Silicon Driver" + depends on INTEL_VSEC + depends on X86_64 + help + This driver enables access to the Intel Software Defined Silicon + interface used to provision silicon features with an authentication + certificate and capability license. + + To compile this driver as a module, choose M here: the module will + be called intel_sdsi. + +config INTEL_SMARTCONNECT + tristate "Intel Smart Connect disabling driver" + depends on ACPI + help + Intel Smart Connect is a technology intended to permit devices to + update state by resuming for a short period of time at regular + intervals. If a user enables this functionality under Windows and + then reboots into Linux, the system may remain configured to resume + on suspend. In the absence of any userspace to support it, the system + will then remain awake until something triggers another suspend. + + This driver checks to determine whether the device has Intel Smart + Connect enabled, and if so disables it. + +config INTEL_TURBO_MAX_3 + bool "Intel Turbo Boost Max Technology 3.0 enumeration driver" + depends on X86_64 && SCHED_MC_PRIO + help + This driver reads maximum performance ratio of each CPU and set up + the scheduler priority metrics. In this way scheduler can prefer + CPU with higher performance to schedule tasks. + + This driver is only required when the system is not using Hardware + P-States (HWP). In HWP mode, priority can be read from ACPI tables. + +config INTEL_VSEC + tristate "Intel Vendor Specific Extended Capabilities Driver" + depends on PCI + select AUXILIARY_BUS + help + Adds support for feature drivers exposed using Intel PCIe VSEC and + DVSEC. + + To compile this driver as a module, choose M here: the module will + be called intel_vsec. diff --git a/drivers/platform/x86/intel/Makefile b/drivers/platform/x86/intel/Makefile new file mode 100644 index 000000000..717933dd0 --- /dev/null +++ b/drivers/platform/x86/intel/Makefile @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for drivers/platform/x86/intel +# Intel x86 Platform-Specific Drivers +# + +obj-$(CONFIG_INTEL_ATOMISP2_PDX86) += atomisp2/ +obj-$(CONFIG_INTEL_IFS) += ifs/ +obj-$(CONFIG_INTEL_SAR_INT1092) += int1092/ +obj-$(CONFIG_INTEL_SKL_INT3472) += int3472/ +obj-$(CONFIG_INTEL_PMC_CORE) += pmc/ +obj-$(CONFIG_INTEL_PMT_CLASS) += pmt/ +obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE) += speed_select_if/ +obj-$(CONFIG_INTEL_TELEMETRY) += telemetry/ +obj-$(CONFIG_INTEL_WMI) += wmi/ +obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL) += uncore-frequency/ + + +# Intel input drivers +intel-hid-y := hid.o +obj-$(CONFIG_INTEL_HID_EVENT) += intel-hid.o +intel-vbtn-y := vbtn.o +obj-$(CONFIG_INTEL_VBTN) += intel-vbtn.o + +# Intel miscellaneous drivers +obj-$(CONFIG_INTEL_ISHTP_ECLITE) += ishtp_eclite.o +intel_int0002_vgpio-y := int0002_vgpio.o +obj-$(CONFIG_INTEL_INT0002_VGPIO) += intel_int0002_vgpio.o +intel_oaktrail-y := oaktrail.o +obj-$(CONFIG_INTEL_OAKTRAIL) += intel_oaktrail.o +intel_sdsi-y := sdsi.o +obj-$(CONFIG_INTEL_SDSI) += intel_sdsi.o +intel_vsec-y := vsec.o +obj-$(CONFIG_INTEL_VSEC) += intel_vsec.o + +# Intel PMIC / PMC / P-Unit drivers +intel_bxtwc_tmu-y := bxtwc_tmu.o +obj-$(CONFIG_INTEL_BXTWC_PMIC_TMU) += intel_bxtwc_tmu.o +intel_crystal_cove_charger-y := crystal_cove_charger.o +obj-$(CONFIG_X86_ANDROID_TABLETS) += intel_crystal_cove_charger.o +intel_chtdc_ti_pwrbtn-y := chtdc_ti_pwrbtn.o +obj-$(CONFIG_INTEL_CHTDC_TI_PWRBTN) += intel_chtdc_ti_pwrbtn.o +intel_chtwc_int33fe-y := chtwc_int33fe.o +obj-$(CONFIG_INTEL_CHTWC_INT33FE) += intel_chtwc_int33fe.o +intel_mrfld_pwrbtn-y := mrfld_pwrbtn.o +obj-$(CONFIG_INTEL_MRFLD_PWRBTN) += intel_mrfld_pwrbtn.o +intel_punit_ipc-y := punit_ipc.o +obj-$(CONFIG_INTEL_PUNIT_IPC) += intel_punit_ipc.o + +# Intel Uncore drivers +intel-rst-y := rst.o +obj-$(CONFIG_INTEL_RST) += intel-rst.o +intel-smartconnect-y := smartconnect.o +obj-$(CONFIG_INTEL_SMARTCONNECT) += intel-smartconnect.o +intel_turbo_max_3-y := turbo_max_3.o +obj-$(CONFIG_INTEL_TURBO_MAX_3) += intel_turbo_max_3.o diff --git a/drivers/platform/x86/intel/atomisp2/Kconfig b/drivers/platform/x86/intel/atomisp2/Kconfig new file mode 100644 index 000000000..35dd2be9d --- /dev/null +++ b/drivers/platform/x86/intel/atomisp2/Kconfig @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Intel x86 Platform Specific Drivers +# + +config INTEL_ATOMISP2_PDX86 + bool + +config INTEL_ATOMISP2_LED + tristate "Intel AtomISP v2 camera LED driver" + depends on GPIOLIB && LEDS_GPIO + select INTEL_ATOMISP2_PDX86 + help + Many Bay Trail and Cherry Trail devices come with a camera attached + to Intel's Image Signal Processor. Linux currently does not have a + driver for these, so they do not work as a camera. Some of these + camera's have a LED which is controlled through a GPIO. + + Some of these devices have a firmware issue where the LED gets turned + on at boot. This driver will turn the LED off at boot and also allows + controlling the LED (repurposing it) through the sysfs LED interface. + + Which GPIO is attached to the LED is usually not described in the + ACPI tables, so this driver contains per-system info about the GPIO + inside the driver, this means that this driver only works on systems + the driver knows about. + + To compile this driver as a module, choose M here: the module + will be called intel_atomisp2_led. + +config INTEL_ATOMISP2_PM + tristate "Intel AtomISP v2 dummy / power-management driver" + depends on PCI && IOSF_MBI && PM + depends on !INTEL_ATOMISP + select INTEL_ATOMISP2_PDX86 + help + Power-management driver for Intel's Image Signal Processor found on + Bay Trail and Cherry Trail devices. This dummy driver's sole purpose + is to turn the ISP off (put it in D3) to save power and to allow + entering of S0ix modes. + + To compile this driver as a module, choose M here: the module + will be called intel_atomisp2_pm. diff --git a/drivers/platform/x86/intel/atomisp2/Makefile b/drivers/platform/x86/intel/atomisp2/Makefile new file mode 100644 index 000000000..96b1e877d --- /dev/null +++ b/drivers/platform/x86/intel/atomisp2/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Intel x86 Platform Specific Drivers +# + +intel_atomisp2_led-y := led.o +obj-$(CONFIG_INTEL_ATOMISP2_LED) += intel_atomisp2_led.o +intel_atomisp2_pm-y += pm.o +obj-$(CONFIG_INTEL_ATOMISP2_PM) += intel_atomisp2_pm.o diff --git a/drivers/platform/x86/intel/atomisp2/led.c b/drivers/platform/x86/intel/atomisp2/led.c new file mode 100644 index 000000000..10077a61d --- /dev/null +++ b/drivers/platform/x86/intel/atomisp2/led.c @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for controlling LEDs for cameras connected to the Intel atomisp2 + * The main purpose of this driver is to turn off LEDs which are on at boot. + * + * Copyright (C) 2020 Hans de Goede <hdegoede@redhat.com> + */ + +#include <linux/dmi.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio/machine.h> +#include <linux/leds.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/platform_device.h> +#include <linux/workqueue.h> + +/* This must be leds-gpio as the leds-gpio driver binds to the name */ +#define DEV_NAME "leds-gpio" + +static const struct gpio_led atomisp2_leds[] = { + { + .name = "atomisp2::camera", + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, +}; + +static const struct gpio_led_platform_data atomisp2_leds_pdata = { + .num_leds = ARRAY_SIZE(atomisp2_leds), + .leds = atomisp2_leds, +}; + +static struct gpiod_lookup_table asus_t100ta_lookup = { + .dev_id = DEV_NAME, + .table = { + GPIO_LOOKUP_IDX("INT33FC:02", 8, NULL, 0, GPIO_ACTIVE_HIGH), + { } + } +}; + +static struct gpiod_lookup_table asus_t100chi_lookup = { + .dev_id = DEV_NAME, + .table = { + GPIO_LOOKUP_IDX("INT33FC:01", 24, NULL, 0, GPIO_ACTIVE_HIGH), + { } + } +}; + +static const struct dmi_system_id atomisp2_led_systems[] __initconst = { + { + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + /* Non exact match to also match T100TAF */ + DMI_MATCH(DMI_PRODUCT_NAME, "T100TA"), + }, + .driver_data = &asus_t100ta_lookup, + }, + { + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T200TA"), + }, + .driver_data = &asus_t100ta_lookup, + }, + { + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100CHI"), + }, + .driver_data = &asus_t100chi_lookup, + }, + {} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(dmi, atomisp2_led_systems); + +static struct gpiod_lookup_table *gpio_lookup; +static struct platform_device *pdev; + +static int __init atomisp2_led_init(void) +{ + const struct dmi_system_id *system; + + system = dmi_first_match(atomisp2_led_systems); + if (!system) + return -ENODEV; + + gpio_lookup = system->driver_data; + gpiod_add_lookup_table(gpio_lookup); + + pdev = platform_device_register_resndata(NULL, + DEV_NAME, PLATFORM_DEVID_NONE, + NULL, 0, &atomisp2_leds_pdata, + sizeof(atomisp2_leds_pdata)); + if (IS_ERR(pdev)) + gpiod_remove_lookup_table(gpio_lookup); + + return PTR_ERR_OR_ZERO(pdev); +} + +static void __exit atomisp2_led_cleanup(void) +{ + platform_device_unregister(pdev); + gpiod_remove_lookup_table(gpio_lookup); +} + +module_init(atomisp2_led_init); +module_exit(atomisp2_led_cleanup); + +/* + * The ACPI INIT method from Asus WMI's code on the T100TA and T200TA turns the + * LED on (without the WMI interface allowing further control over the LED). + * Ensure we are loaded after asus-nb-wmi so that we turn the LED off again. + */ +MODULE_SOFTDEP("pre: asus_nb_wmi"); +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com"); +MODULE_DESCRIPTION("Intel atomisp2 camera LED driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/intel/atomisp2/pm.c b/drivers/platform/x86/intel/atomisp2/pm.c new file mode 100644 index 000000000..805fc0d85 --- /dev/null +++ b/drivers/platform/x86/intel/atomisp2/pm.c @@ -0,0 +1,143 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Dummy driver for Intel's Image Signal Processor found on Bay Trail + * and Cherry Trail devices. The sole purpose of this driver is to allow + * the ISP to be put in D3. + * + * Copyright (C) 2018 Hans de Goede <hdegoede@redhat.com> + * + * Based on various non upstream patches for ISP support: + * Copyright (C) 2010-2017 Intel Corporation. All rights reserved. + * Copyright (c) 2010 Silicon Hive www.siliconhive.com. + */ + +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/pci.h> +#include <linux/pm_runtime.h> +#include <asm/iosf_mbi.h> + +/* PCI configuration regs */ +#define PCI_INTERRUPT_CTRL 0x9c + +#define PCI_CSI_CONTROL 0xe8 +#define PCI_CSI_CONTROL_PORTS_OFF_MASK 0x7 + +/* IOSF BT_MBI_UNIT_PMC regs */ +#define ISPSSPM0 0x39 +#define ISPSSPM0_ISPSSC_OFFSET 0 +#define ISPSSPM0_ISPSSC_MASK 0x00000003 +#define ISPSSPM0_ISPSSS_OFFSET 24 +#define ISPSSPM0_ISPSSS_MASK 0x03000000 +#define ISPSSPM0_IUNIT_POWER_ON 0x0 +#define ISPSSPM0_IUNIT_POWER_OFF 0x3 + +static int isp_set_power(struct pci_dev *dev, bool enable) +{ + unsigned long timeout; + u32 val = enable ? ISPSSPM0_IUNIT_POWER_ON : ISPSSPM0_IUNIT_POWER_OFF; + + /* Write to ISPSSPM0 bit[1:0] to power on/off the IUNIT */ + iosf_mbi_modify(BT_MBI_UNIT_PMC, MBI_REG_READ, ISPSSPM0, + val, ISPSSPM0_ISPSSC_MASK); + + /* + * There should be no IUNIT access while power-down is + * in progress. HW sighting: 4567865. + * Wait up to 50 ms for the IUNIT to shut down. + * And we do the same for power on. + */ + timeout = jiffies + msecs_to_jiffies(50); + do { + u32 tmp; + + /* Wait until ISPSSPM0 bit[25:24] shows the right value */ + iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, ISPSSPM0, &tmp); + tmp = (tmp & ISPSSPM0_ISPSSS_MASK) >> ISPSSPM0_ISPSSS_OFFSET; + if (tmp == val) + return 0; + + usleep_range(1000, 2000); + } while (time_before(jiffies, timeout)); + + dev_err(&dev->dev, "IUNIT power-%s timeout.\n", enable ? "on" : "off"); + return -EBUSY; +} + +static int isp_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + pm_runtime_allow(&dev->dev); + pm_runtime_put_sync_suspend(&dev->dev); + + return 0; +} + +static void isp_remove(struct pci_dev *dev) +{ + pm_runtime_get_sync(&dev->dev); + pm_runtime_forbid(&dev->dev); +} + +static int isp_pci_suspend(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + u32 val; + + pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, 0); + + /* + * MRFLD IUNIT DPHY is located in an always-power-on island + * MRFLD HW design need all CSI ports are disabled before + * powering down the IUNIT. + */ + pci_read_config_dword(pdev, PCI_CSI_CONTROL, &val); + val |= PCI_CSI_CONTROL_PORTS_OFF_MASK; + pci_write_config_dword(pdev, PCI_CSI_CONTROL, val); + + /* + * We lose config space access when punit power gates + * the ISP. Can't use pci_set_power_state() because + * pmcsr won't actually change when we write to it. + */ + pci_save_state(pdev); + pdev->current_state = PCI_D3cold; + isp_set_power(pdev, false); + + return 0; +} + +static int isp_pci_resume(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + + isp_set_power(pdev, true); + pdev->current_state = PCI_D0; + pci_restore_state(pdev); + + return 0; +} + +static UNIVERSAL_DEV_PM_OPS(isp_pm_ops, isp_pci_suspend, + isp_pci_resume, NULL); + +static const struct pci_device_id isp_id_table[] = { + { PCI_VDEVICE(INTEL, 0x0f38), }, + { PCI_VDEVICE(INTEL, 0x22b8), }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, isp_id_table); + +static struct pci_driver isp_pci_driver = { + .name = "intel_atomisp2_pm", + .id_table = isp_id_table, + .probe = isp_probe, + .remove = isp_remove, + .driver.pm = &isp_pm_ops, +}; + +module_pci_driver(isp_pci_driver); + +MODULE_DESCRIPTION("Intel AtomISP2 dummy / power-management drv (for suspend)"); +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/platform/x86/intel/bxtwc_tmu.c b/drivers/platform/x86/intel/bxtwc_tmu.c new file mode 100644 index 000000000..7ccf58364 --- /dev/null +++ b/drivers/platform/x86/intel/bxtwc_tmu.c @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel BXT Whiskey Cove PMIC TMU driver + * + * Copyright (C) 2016 Intel Corporation. All rights reserved. + * + * This driver adds TMU (Time Management Unit) support for Intel BXT platform. + * It enables the alarm wake-up functionality in the TMU unit of Whiskey Cove + * PMIC. + */ + +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/mfd/intel_soc_pmic.h> + +#define BXTWC_TMUIRQ 0x4fb6 +#define BXTWC_MIRQLVL1 0x4e0e +#define BXTWC_MTMUIRQ_REG 0x4fb7 +#define BXTWC_MIRQLVL1_MTMU BIT(1) +#define BXTWC_TMU_WK_ALRM BIT(1) +#define BXTWC_TMU_SYS_ALRM BIT(2) +#define BXTWC_TMU_ALRM_MASK (BXTWC_TMU_WK_ALRM | BXTWC_TMU_SYS_ALRM) +#define BXTWC_TMU_ALRM_IRQ (BXTWC_TMU_WK_ALRM | BXTWC_TMU_SYS_ALRM) + +struct wcove_tmu { + int irq; + struct device *dev; + struct regmap *regmap; +}; + +static irqreturn_t bxt_wcove_tmu_irq_handler(int irq, void *data) +{ + struct wcove_tmu *wctmu = data; + unsigned int tmu_irq; + + /* Read TMU interrupt reg */ + regmap_read(wctmu->regmap, BXTWC_TMUIRQ, &tmu_irq); + if (tmu_irq & BXTWC_TMU_ALRM_IRQ) { + /* clear TMU irq */ + regmap_write(wctmu->regmap, BXTWC_TMUIRQ, tmu_irq); + return IRQ_HANDLED; + } + return IRQ_NONE; +} + +static int bxt_wcove_tmu_probe(struct platform_device *pdev) +{ + struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent); + struct regmap_irq_chip_data *regmap_irq_chip; + struct wcove_tmu *wctmu; + int ret, virq, irq; + + wctmu = devm_kzalloc(&pdev->dev, sizeof(*wctmu), GFP_KERNEL); + if (!wctmu) + return -ENOMEM; + + wctmu->dev = &pdev->dev; + wctmu->regmap = pmic->regmap; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + regmap_irq_chip = pmic->irq_chip_data_tmu; + virq = regmap_irq_get_virq(regmap_irq_chip, irq); + if (virq < 0) { + dev_err(&pdev->dev, + "failed to get virtual interrupt=%d\n", irq); + return virq; + } + + ret = devm_request_threaded_irq(&pdev->dev, virq, + NULL, bxt_wcove_tmu_irq_handler, + IRQF_ONESHOT, "bxt_wcove_tmu", wctmu); + if (ret) { + dev_err(&pdev->dev, "request irq failed: %d,virq: %d\n", + ret, virq); + return ret; + } + wctmu->irq = virq; + + /* Unmask TMU second level Wake & System alarm */ + regmap_update_bits(wctmu->regmap, BXTWC_MTMUIRQ_REG, + BXTWC_TMU_ALRM_MASK, 0); + + platform_set_drvdata(pdev, wctmu); + return 0; +} + +static int bxt_wcove_tmu_remove(struct platform_device *pdev) +{ + struct wcove_tmu *wctmu = platform_get_drvdata(pdev); + unsigned int val; + + /* Mask TMU interrupts */ + regmap_read(wctmu->regmap, BXTWC_MIRQLVL1, &val); + regmap_write(wctmu->regmap, BXTWC_MIRQLVL1, + val | BXTWC_MIRQLVL1_MTMU); + regmap_read(wctmu->regmap, BXTWC_MTMUIRQ_REG, &val); + regmap_write(wctmu->regmap, BXTWC_MTMUIRQ_REG, + val | BXTWC_TMU_ALRM_MASK); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int bxtwc_tmu_suspend(struct device *dev) +{ + struct wcove_tmu *wctmu = dev_get_drvdata(dev); + + enable_irq_wake(wctmu->irq); + return 0; +} + +static int bxtwc_tmu_resume(struct device *dev) +{ + struct wcove_tmu *wctmu = dev_get_drvdata(dev); + + disable_irq_wake(wctmu->irq); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(bxtwc_tmu_pm_ops, bxtwc_tmu_suspend, bxtwc_tmu_resume); + +static const struct platform_device_id bxt_wcove_tmu_id_table[] = { + { .name = "bxt_wcove_tmu" }, + {}, +}; +MODULE_DEVICE_TABLE(platform, bxt_wcove_tmu_id_table); + +static struct platform_driver bxt_wcove_tmu_driver = { + .probe = bxt_wcove_tmu_probe, + .remove = bxt_wcove_tmu_remove, + .driver = { + .name = "bxt_wcove_tmu", + .pm = &bxtwc_tmu_pm_ops, + }, + .id_table = bxt_wcove_tmu_id_table, +}; + +module_platform_driver(bxt_wcove_tmu_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Nilesh Bacchewar <nilesh.bacchewar@intel.com>"); +MODULE_DESCRIPTION("BXT Whiskey Cove TMU Driver"); diff --git a/drivers/platform/x86/intel/chtdc_ti_pwrbtn.c b/drivers/platform/x86/intel/chtdc_ti_pwrbtn.c new file mode 100644 index 000000000..9606a994a --- /dev/null +++ b/drivers/platform/x86/intel/chtdc_ti_pwrbtn.c @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Power-button driver for Dollar Cove TI PMIC + * Copyright (C) 2014 Intel Corp + * Copyright (c) 2017 Takashi Iwai <tiwai@suse.de> + */ + +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/mfd/intel_soc_pmic.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pm_wakeirq.h> +#include <linux/slab.h> + +#define CHTDC_TI_SIRQ_REG 0x3 +#define SIRQ_PWRBTN_REL BIT(0) + +static irqreturn_t chtdc_ti_pwrbtn_interrupt(int irq, void *dev_id) +{ + struct input_dev *input = dev_id; + struct device *dev = input->dev.parent; + struct regmap *regmap = dev_get_drvdata(dev); + int state; + + if (!regmap_read(regmap, CHTDC_TI_SIRQ_REG, &state)) { + dev_dbg(dev, "SIRQ_REG=0x%x\n", state); + input_report_key(input, KEY_POWER, !(state & SIRQ_PWRBTN_REL)); + input_sync(input); + } + + return IRQ_HANDLED; +} + +static int chtdc_ti_pwrbtn_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct intel_soc_pmic *pmic = dev_get_drvdata(dev->parent); + struct input_dev *input; + int irq, err; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + input = devm_input_allocate_device(dev); + if (!input) + return -ENOMEM; + input->name = pdev->name; + input->phys = "power-button/input0"; + input->id.bustype = BUS_HOST; + input_set_capability(input, EV_KEY, KEY_POWER); + err = input_register_device(input); + if (err) + return err; + + dev_set_drvdata(dev, pmic->regmap); + + err = devm_request_threaded_irq(dev, irq, NULL, + chtdc_ti_pwrbtn_interrupt, + IRQF_ONESHOT, KBUILD_MODNAME, input); + if (err) + return err; + + device_init_wakeup(dev, true); + dev_pm_set_wake_irq(dev, irq); + return 0; +} + +static int chtdc_ti_pwrbtn_remove(struct platform_device *pdev) +{ + dev_pm_clear_wake_irq(&pdev->dev); + device_init_wakeup(&pdev->dev, false); + return 0; +} + +static const struct platform_device_id chtdc_ti_pwrbtn_id_table[] = { + { .name = "chtdc_ti_pwrbtn" }, + {}, +}; +MODULE_DEVICE_TABLE(platform, chtdc_ti_pwrbtn_id_table); + +static struct platform_driver chtdc_ti_pwrbtn_driver = { + .driver = { + .name = KBUILD_MODNAME, + }, + .probe = chtdc_ti_pwrbtn_probe, + .remove = chtdc_ti_pwrbtn_remove, + .id_table = chtdc_ti_pwrbtn_id_table, +}; +module_platform_driver(chtdc_ti_pwrbtn_driver); + +MODULE_DESCRIPTION("Power-button driver for Dollar Cove TI PMIC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/platform/x86/intel/chtwc_int33fe.c b/drivers/platform/x86/intel/chtwc_int33fe.c new file mode 100644 index 000000000..2c9a7d52b --- /dev/null +++ b/drivers/platform/x86/intel/chtwc_int33fe.c @@ -0,0 +1,439 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel Cherry Trail ACPI INT33FE pseudo device driver + * + * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com> + * + * Some Intel Cherry Trail based device which ship with Windows 10, have + * this weird INT33FE ACPI device with a CRS table with 4 I2cSerialBusV2 + * resources, for 4 different chips attached to various I²C buses: + * 1. The Whiskey Cove PMIC, which is also described by the INT34D3 ACPI device + * 2. Maxim MAX17047 Fuel Gauge Controller + * 3. FUSB302 USB Type-C Controller + * 4. PI3USB30532 USB switch + * + * So this driver is a stub / pseudo driver whose only purpose is to + * instantiate I²C clients for chips 2 - 4, so that standard I²C drivers + * for these chips can bind to the them. + */ + +#include <linux/dmi.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <linux/usb/pd.h> + +struct cht_int33fe_data { + struct i2c_client *battery_fg; + struct i2c_client *fusb302; + struct i2c_client *pi3usb30532; + struct fwnode_handle *dp; +}; + +/* + * Grrr, I severely dislike buggy BIOS-es. At least one BIOS enumerates + * the max17047 both through the INT33FE ACPI device (it is right there + * in the resources table) as well as through a separate MAX17047 device. + * + * These helpers are used to work around this by checking if an I²C client + * for the max17047 has already been registered. + */ +static int cht_int33fe_check_for_max17047(struct device *dev, void *data) +{ + struct i2c_client **max17047 = data; + struct acpi_device *adev; + + adev = ACPI_COMPANION(dev); + if (!adev) + return 0; + + /* The MAX17047 ACPI node doesn't have an UID, so we don't check that */ + if (!acpi_dev_hid_uid_match(adev, "MAX17047", NULL)) + return 0; + + *max17047 = to_i2c_client(dev); + return 1; +} + +static const char * const max17047_suppliers[] = { "bq24190-charger" }; + +static const struct property_entry max17047_properties[] = { + PROPERTY_ENTRY_STRING_ARRAY("supplied-from", max17047_suppliers), + { } +}; + +static const struct software_node max17047_node = { + .name = "max17047", + .properties = max17047_properties, +}; + +/* + * We are not using inline property here because those are constant, + * and we need to adjust this one at runtime to point to real + * software node. + */ +static struct software_node_ref_args fusb302_mux_refs[] = { + { .node = NULL }, +}; + +static const struct property_entry fusb302_properties[] = { + PROPERTY_ENTRY_STRING("linux,extcon-name", "cht_wcove_pwrsrc"), + PROPERTY_ENTRY_REF_ARRAY("usb-role-switch", fusb302_mux_refs), + { } +}; + +static const struct software_node fusb302_node = { + .name = "fusb302", + .properties = fusb302_properties, +}; + +#define PDO_FIXED_FLAGS \ + (PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM) + +static const u32 src_pdo[] = { + PDO_FIXED(5000, 1500, PDO_FIXED_FLAGS), +}; + +static const u32 snk_pdo[] = { + PDO_FIXED(5000, 400, PDO_FIXED_FLAGS), + PDO_VAR(5000, 12000, 3000), +}; + +static const struct software_node pi3usb30532_node = { + .name = "pi3usb30532", +}; + +static const struct software_node displayport_node = { + .name = "displayport", +}; + +static const struct property_entry usb_connector_properties[] = { + PROPERTY_ENTRY_STRING("data-role", "dual"), + PROPERTY_ENTRY_STRING("power-role", "dual"), + PROPERTY_ENTRY_STRING("try-power-role", "sink"), + PROPERTY_ENTRY_U32_ARRAY("source-pdos", src_pdo), + PROPERTY_ENTRY_U32_ARRAY("sink-pdos", snk_pdo), + PROPERTY_ENTRY_U32("op-sink-microwatt", 2500000), + PROPERTY_ENTRY_REF("orientation-switch", &pi3usb30532_node), + PROPERTY_ENTRY_REF("mode-switch", &pi3usb30532_node), + PROPERTY_ENTRY_REF("displayport", &displayport_node), + { } +}; + +static const struct software_node usb_connector_node = { + .name = "connector", + .parent = &fusb302_node, + .properties = usb_connector_properties, +}; + +static const struct software_node altmodes_node = { + .name = "altmodes", + .parent = &usb_connector_node, +}; + +static const struct property_entry dp_altmode_properties[] = { + PROPERTY_ENTRY_U32("svid", 0xff01), + PROPERTY_ENTRY_U32("vdo", 0x0c0086), + { } +}; + +static const struct software_node dp_altmode_node = { + .name = "displayport-altmode", + .parent = &altmodes_node, + .properties = dp_altmode_properties, +}; + +static const struct software_node *node_group[] = { + &fusb302_node, + &max17047_node, + &pi3usb30532_node, + &displayport_node, + &usb_connector_node, + &altmodes_node, + &dp_altmode_node, + NULL +}; + +static int cht_int33fe_setup_dp(struct cht_int33fe_data *data) +{ + struct fwnode_handle *fwnode; + struct pci_dev *pdev; + + fwnode = software_node_fwnode(&displayport_node); + if (!fwnode) + return -ENODEV; + + /* First let's find the GPU PCI device */ + pdev = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, NULL); + if (!pdev || pdev->vendor != PCI_VENDOR_ID_INTEL) { + pci_dev_put(pdev); + return -ENODEV; + } + + /* Then the DP-2 child device node */ + data->dp = device_get_named_child_node(&pdev->dev, "DD04"); + pci_dev_put(pdev); + if (!data->dp) + return -ENODEV; + + fwnode->secondary = ERR_PTR(-ENODEV); + data->dp->secondary = fwnode; + + return 0; +} + +static void cht_int33fe_remove_nodes(struct cht_int33fe_data *data) +{ + software_node_unregister_node_group(node_group); + + if (fusb302_mux_refs[0].node) { + fwnode_handle_put(software_node_fwnode(fusb302_mux_refs[0].node)); + fusb302_mux_refs[0].node = NULL; + } + + if (data->dp) { + data->dp->secondary = NULL; + fwnode_handle_put(data->dp); + data->dp = NULL; + } +} + +static int cht_int33fe_add_nodes(struct cht_int33fe_data *data) +{ + const struct software_node *mux_ref_node; + int ret; + + /* + * There is no ACPI device node for the USB role mux, so we need to wait + * until the mux driver has created software node for the mux device. + * It means we depend on the mux driver. This function will return + * -EPROBE_DEFER until the mux device is registered. + */ + mux_ref_node = software_node_find_by_name(NULL, "intel-xhci-usb-sw"); + if (!mux_ref_node) + return -EPROBE_DEFER; + + /* + * Update node used in "usb-role-switch" property. Note that we + * rely on software_node_register_node_group() to use the original + * instance of properties instead of copying them. + */ + fusb302_mux_refs[0].node = mux_ref_node; + + ret = software_node_register_node_group(node_group); + if (ret) + return ret; + + /* The devices that are not created in this driver need extra steps. */ + + /* + * The DP connector does have ACPI device node. In this case we can just + * find that ACPI node and assign our node as the secondary node to it. + */ + ret = cht_int33fe_setup_dp(data); + if (ret) + goto err_remove_nodes; + + return 0; + +err_remove_nodes: + cht_int33fe_remove_nodes(data); + + return ret; +} + +static int +cht_int33fe_register_max17047(struct device *dev, struct cht_int33fe_data *data) +{ + struct i2c_client *max17047 = NULL; + struct i2c_board_info board_info; + struct fwnode_handle *fwnode; + int ret; + + fwnode = software_node_fwnode(&max17047_node); + if (!fwnode) + return -ENODEV; + + i2c_for_each_dev(&max17047, cht_int33fe_check_for_max17047); + if (max17047) { + /* Pre-existing I²C client for the max17047, add device properties */ + set_secondary_fwnode(&max17047->dev, fwnode); + /* And re-probe to get the new device properties applied */ + ret = device_reprobe(&max17047->dev); + if (ret) + dev_warn(dev, "Reprobing max17047 error: %d\n", ret); + return 0; + } + + memset(&board_info, 0, sizeof(board_info)); + strscpy(board_info.type, "max17047", I2C_NAME_SIZE); + board_info.dev_name = "max17047"; + board_info.fwnode = fwnode; + data->battery_fg = i2c_acpi_new_device(dev, 1, &board_info); + + return PTR_ERR_OR_ZERO(data->battery_fg); +} + +static const struct dmi_system_id cht_int33fe_typec_ids[] = { + { + /* + * GPD win / GPD pocket mini laptops + * + * This DMI match may not seem unique, but it is. In the 67000+ + * DMI decode dumps from linux-hardware.org only 116 have + * board_vendor set to "AMI Corporation" and of those 116 only + * the GPD win's and pocket's board_name is "Default string". + */ + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"), + DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"), + }, + }, + { } +}; +MODULE_DEVICE_TABLE(dmi, cht_int33fe_typec_ids); + +static int cht_int33fe_typec_probe(struct platform_device *pdev) +{ + struct i2c_board_info board_info; + struct device *dev = &pdev->dev; + struct cht_int33fe_data *data; + struct fwnode_handle *fwnode; + struct regulator *regulator; + int fusb302_irq; + int ret; + + if (!dmi_check_system(cht_int33fe_typec_ids)) + return -ENODEV; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + /* + * We expect the WC PMIC to be paired with a TI bq24292i charger-IC. + * We check for the bq24292i vbus regulator here, this has 2 purposes: + * 1) The bq24292i allows charging with up to 12V, setting the fusb302's + * max-snk voltage to 12V with another charger-IC is not good. + * 2) For the fusb302 driver to get the bq24292i vbus regulator, the + * regulator-map, which is part of the bq24292i regulator_init_data, + * must be registered before the fusb302 is instantiated, otherwise + * it will end up with a dummy-regulator. + * Note "cht_wc_usb_typec_vbus" comes from the regulator_init_data + * which is defined in i2c-cht-wc.c from where the bq24292i I²C client + * gets instantiated. We use regulator_get_optional here so that we + * don't end up getting a dummy-regulator ourselves. + */ + regulator = regulator_get_optional(dev, "cht_wc_usb_typec_vbus"); + if (IS_ERR(regulator)) { + ret = PTR_ERR(regulator); + return (ret == -ENODEV) ? -EPROBE_DEFER : ret; + } + regulator_put(regulator); + + /* The FUSB302 uses the IRQ at index 1 and is the only IRQ user */ + fusb302_irq = acpi_dev_gpio_irq_get(ACPI_COMPANION(dev), 1); + if (fusb302_irq < 0) { + if (fusb302_irq != -EPROBE_DEFER) + dev_err(dev, "Error getting FUSB302 irq\n"); + return fusb302_irq; + } + + ret = cht_int33fe_add_nodes(data); + if (ret) + return ret; + + /* Work around BIOS bug, see comment on cht_int33fe_check_for_max17047() */ + ret = cht_int33fe_register_max17047(dev, data); + if (ret) + goto out_remove_nodes; + + fwnode = software_node_fwnode(&fusb302_node); + if (!fwnode) { + ret = -ENODEV; + goto out_unregister_max17047; + } + + memset(&board_info, 0, sizeof(board_info)); + strscpy(board_info.type, "typec_fusb302", I2C_NAME_SIZE); + board_info.dev_name = "fusb302"; + board_info.fwnode = fwnode; + board_info.irq = fusb302_irq; + + data->fusb302 = i2c_acpi_new_device(dev, 2, &board_info); + if (IS_ERR(data->fusb302)) { + ret = PTR_ERR(data->fusb302); + goto out_unregister_max17047; + } + + fwnode = software_node_fwnode(&pi3usb30532_node); + if (!fwnode) { + ret = -ENODEV; + goto out_unregister_fusb302; + } + + memset(&board_info, 0, sizeof(board_info)); + board_info.dev_name = "pi3usb30532"; + board_info.fwnode = fwnode; + strscpy(board_info.type, "pi3usb30532", I2C_NAME_SIZE); + + data->pi3usb30532 = i2c_acpi_new_device(dev, 3, &board_info); + if (IS_ERR(data->pi3usb30532)) { + ret = PTR_ERR(data->pi3usb30532); + goto out_unregister_fusb302; + } + + platform_set_drvdata(pdev, data); + + return 0; + +out_unregister_fusb302: + i2c_unregister_device(data->fusb302); + +out_unregister_max17047: + i2c_unregister_device(data->battery_fg); + +out_remove_nodes: + cht_int33fe_remove_nodes(data); + + return ret; +} + +static int cht_int33fe_typec_remove(struct platform_device *pdev) +{ + struct cht_int33fe_data *data = platform_get_drvdata(pdev); + + i2c_unregister_device(data->pi3usb30532); + i2c_unregister_device(data->fusb302); + i2c_unregister_device(data->battery_fg); + + cht_int33fe_remove_nodes(data); + + return 0; +} + +static const struct acpi_device_id cht_int33fe_acpi_ids[] = { + { "INT33FE", }, + { } +}; + +static struct platform_driver cht_int33fe_typec_driver = { + .driver = { + .name = "Intel Cherry Trail ACPI INT33FE Type-C driver", + .acpi_match_table = ACPI_PTR(cht_int33fe_acpi_ids), + }, + .probe = cht_int33fe_typec_probe, + .remove = cht_int33fe_typec_remove, +}; + +module_platform_driver(cht_int33fe_typec_driver); + +MODULE_DESCRIPTION("Intel Cherry Trail ACPI INT33FE Type-C pseudo device driver"); +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/platform/x86/intel/crystal_cove_charger.c b/drivers/platform/x86/intel/crystal_cove_charger.c new file mode 100644 index 000000000..e4299cfa2 --- /dev/null +++ b/drivers/platform/x86/intel/crystal_cove_charger.c @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for the external-charger IRQ pass-through function of the + * Intel Bay Trail Crystal Cove PMIC. + * + * Note this is NOT a power_supply class driver, it just deals with IRQ + * pass-through, this requires a separate driver because the PMIC's + * level 2 interrupt for this must be explicitly acked. + */ + +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/mfd/intel_soc_pmic.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#define CHGRIRQ_REG 0x0a +#define MCHGRIRQ_REG 0x17 + +struct crystal_cove_charger_data { + struct mutex buslock; /* irq_bus_lock */ + struct irq_chip irqchip; + struct regmap *regmap; + struct irq_domain *irq_domain; + int irq; + int charger_irq; + u8 mask; + u8 new_mask; +}; + +static irqreturn_t crystal_cove_charger_irq(int irq, void *data) +{ + struct crystal_cove_charger_data *charger = data; + + /* No need to read CHGRIRQ_REG as there is only 1 IRQ */ + handle_nested_irq(charger->charger_irq); + + /* Ack CHGRIRQ 0 */ + regmap_write(charger->regmap, CHGRIRQ_REG, BIT(0)); + + return IRQ_HANDLED; +} + +static void crystal_cove_charger_irq_bus_lock(struct irq_data *data) +{ + struct crystal_cove_charger_data *charger = irq_data_get_irq_chip_data(data); + + mutex_lock(&charger->buslock); +} + +static void crystal_cove_charger_irq_bus_sync_unlock(struct irq_data *data) +{ + struct crystal_cove_charger_data *charger = irq_data_get_irq_chip_data(data); + + if (charger->mask != charger->new_mask) { + regmap_write(charger->regmap, MCHGRIRQ_REG, charger->new_mask); + charger->mask = charger->new_mask; + } + + mutex_unlock(&charger->buslock); +} + +static void crystal_cove_charger_irq_unmask(struct irq_data *data) +{ + struct crystal_cove_charger_data *charger = irq_data_get_irq_chip_data(data); + + charger->new_mask &= ~BIT(data->hwirq); +} + +static void crystal_cove_charger_irq_mask(struct irq_data *data) +{ + struct crystal_cove_charger_data *charger = irq_data_get_irq_chip_data(data); + + charger->new_mask |= BIT(data->hwirq); +} + +static void crystal_cove_charger_rm_irq_domain(void *data) +{ + struct crystal_cove_charger_data *charger = data; + + irq_domain_remove(charger->irq_domain); +} + +static int crystal_cove_charger_probe(struct platform_device *pdev) +{ + struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent); + struct crystal_cove_charger_data *charger; + int ret; + + charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL); + if (!charger) + return -ENOMEM; + + charger->regmap = pmic->regmap; + mutex_init(&charger->buslock); + + charger->irq = platform_get_irq(pdev, 0); + if (charger->irq < 0) + return charger->irq; + + charger->irq_domain = irq_domain_create_linear(dev_fwnode(pdev->dev.parent), 1, + &irq_domain_simple_ops, NULL); + if (!charger->irq_domain) + return -ENOMEM; + + /* Distuingish IRQ domain from others sharing (MFD) the same fwnode */ + irq_domain_update_bus_token(charger->irq_domain, DOMAIN_BUS_WAKEUP); + + ret = devm_add_action_or_reset(&pdev->dev, crystal_cove_charger_rm_irq_domain, charger); + if (ret) + return ret; + + charger->charger_irq = irq_create_mapping(charger->irq_domain, 0); + if (!charger->charger_irq) + return -ENOMEM; + + charger->irqchip.name = KBUILD_MODNAME; + charger->irqchip.irq_unmask = crystal_cove_charger_irq_unmask; + charger->irqchip.irq_mask = crystal_cove_charger_irq_mask; + charger->irqchip.irq_bus_lock = crystal_cove_charger_irq_bus_lock; + charger->irqchip.irq_bus_sync_unlock = crystal_cove_charger_irq_bus_sync_unlock; + + irq_set_chip_data(charger->charger_irq, charger); + irq_set_chip_and_handler(charger->charger_irq, &charger->irqchip, handle_simple_irq); + irq_set_nested_thread(charger->charger_irq, true); + irq_set_noprobe(charger->charger_irq); + + /* Mask the single 2nd level IRQ before enabling the 1st level IRQ */ + charger->mask = charger->new_mask = BIT(0); + regmap_write(charger->regmap, MCHGRIRQ_REG, charger->mask); + + ret = devm_request_threaded_irq(&pdev->dev, charger->irq, NULL, + crystal_cove_charger_irq, + IRQF_ONESHOT, KBUILD_MODNAME, charger); + if (ret) + return dev_err_probe(&pdev->dev, ret, "requesting irq\n"); + + return 0; +} + +static struct platform_driver crystal_cove_charger_driver = { + .probe = crystal_cove_charger_probe, + .driver = { + .name = "crystal_cove_charger", + }, +}; +module_platform_driver(crystal_cove_charger_driver); + +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com"); +MODULE_DESCRIPTION("Intel Bay Trail Crystal Cove external charger IRQ pass-through"); +MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/intel/hid.c b/drivers/platform/x86/intel/hid.c new file mode 100644 index 000000000..b96ef0eb8 --- /dev/null +++ b/drivers/platform/x86/intel/hid.c @@ -0,0 +1,765 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Intel HID event & 5 button array driver + * + * Copyright (C) 2015 Alex Hung <alex.hung@canonical.com> + * Copyright (C) 2015 Andrew Lutomirski <luto@kernel.org> + */ + +#include <linux/acpi.h> +#include <linux/dmi.h> +#include <linux/input.h> +#include <linux/input/sparse-keymap.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/suspend.h> +#include "../dual_accel_detect.h" + +/* When NOT in tablet mode, VGBS returns with the flag 0x40 */ +#define TABLET_MODE_FLAG BIT(6) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Alex Hung"); + +static const struct acpi_device_id intel_hid_ids[] = { + {"INT33D5", 0}, + {"INTC1051", 0}, + {"INTC1054", 0}, + {"INTC1070", 0}, + {"INTC1076", 0}, + {"INTC1077", 0}, + {"INTC1078", 0}, + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, intel_hid_ids); + +/* In theory, these are HID usages. */ +static const struct key_entry intel_hid_keymap[] = { + /* 1: LSuper (Page 0x07, usage 0xE3) -- unclear what to do */ + /* 2: Toggle SW_ROTATE_LOCK -- easy to implement if seen in wild */ + { KE_KEY, 3, { KEY_NUMLOCK } }, + { KE_KEY, 4, { KEY_HOME } }, + { KE_KEY, 5, { KEY_END } }, + { KE_KEY, 6, { KEY_PAGEUP } }, + { KE_KEY, 7, { KEY_PAGEDOWN } }, + { KE_KEY, 8, { KEY_RFKILL } }, + { KE_KEY, 9, { KEY_POWER } }, + { KE_KEY, 11, { KEY_SLEEP } }, + /* 13 has two different meanings in the spec -- ignore it. */ + { KE_KEY, 14, { KEY_STOPCD } }, + { KE_KEY, 15, { KEY_PLAYPAUSE } }, + { KE_KEY, 16, { KEY_MUTE } }, + { KE_KEY, 17, { KEY_VOLUMEUP } }, + { KE_KEY, 18, { KEY_VOLUMEDOWN } }, + { KE_KEY, 19, { KEY_BRIGHTNESSUP } }, + { KE_KEY, 20, { KEY_BRIGHTNESSDOWN } }, + /* 27: wake -- needs special handling */ + { KE_END }, +}; + +/* 5 button array notification value. */ +static const struct key_entry intel_array_keymap[] = { + { KE_KEY, 0xC2, { KEY_LEFTMETA } }, /* Press */ + { KE_IGNORE, 0xC3, { KEY_LEFTMETA } }, /* Release */ + { KE_KEY, 0xC4, { KEY_VOLUMEUP } }, /* Press */ + { KE_IGNORE, 0xC5, { KEY_VOLUMEUP } }, /* Release */ + { KE_KEY, 0xC6, { KEY_VOLUMEDOWN } }, /* Press */ + { KE_IGNORE, 0xC7, { KEY_VOLUMEDOWN } }, /* Release */ + { KE_KEY, 0xC8, { KEY_ROTATE_LOCK_TOGGLE } }, /* Press */ + { KE_IGNORE, 0xC9, { KEY_ROTATE_LOCK_TOGGLE } }, /* Release */ + { KE_KEY, 0xCE, { KEY_POWER } }, /* Press */ + { KE_IGNORE, 0xCF, { KEY_POWER } }, /* Release */ + { KE_END }, +}; + +static const struct dmi_system_id button_array_table[] = { + { + .ident = "Wacom MobileStudio Pro 13", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Wacom Co.,Ltd"), + DMI_MATCH(DMI_PRODUCT_NAME, "Wacom MobileStudio Pro 13"), + }, + }, + { + .ident = "Wacom MobileStudio Pro 16", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Wacom Co.,Ltd"), + DMI_MATCH(DMI_PRODUCT_NAME, "Wacom MobileStudio Pro 16"), + }, + }, + { + .ident = "HP Spectre x2 (2015)", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Spectre x2 Detachable"), + }, + }, + { + .ident = "Lenovo ThinkPad X1 Tablet Gen 2", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_FAMILY, "ThinkPad X1 Tablet Gen 2"), + }, + }, + { + .ident = "Microsoft Surface Go 3", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "Surface Go 3"), + }, + }, + { } +}; + +/* + * Some convertible use the intel-hid ACPI interface to report SW_TABLET_MODE, + * these need to be compared via a DMI based authorization list because some + * models have unreliable VGBS return which could cause incorrect + * SW_TABLET_MODE report. + */ +static const struct dmi_system_id dmi_vgbs_allow_list[] = { + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Spectre x360 Convertible 15-df0xxx"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "Surface Go"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Elite Dragonfly G2 Notebook PC"), + }, + }, + { } +}; + +/* + * Some devices, even non convertible ones, can send incorrect SW_TABLET_MODE + * reports. Accept such reports only from devices in this list. + */ +static const struct dmi_system_id dmi_auto_add_switch[] = { + { + .matches = { + DMI_EXACT_MATCH(DMI_CHASSIS_TYPE, "31" /* Convertible */), + }, + }, + { + .matches = { + DMI_EXACT_MATCH(DMI_CHASSIS_TYPE, "32" /* Detachable */), + }, + }, + {} /* Array terminator */ +}; + +struct intel_hid_priv { + struct input_dev *input_dev; + struct input_dev *array; + struct input_dev *switches; + bool wakeup_mode; + bool auto_add_switch; +}; + +#define HID_EVENT_FILTER_UUID "eeec56b3-4442-408f-a792-4edd4d758054" + +enum intel_hid_dsm_fn_codes { + INTEL_HID_DSM_FN_INVALID, + INTEL_HID_DSM_BTNL_FN, + INTEL_HID_DSM_HDMM_FN, + INTEL_HID_DSM_HDSM_FN, + INTEL_HID_DSM_HDEM_FN, + INTEL_HID_DSM_BTNS_FN, + INTEL_HID_DSM_BTNE_FN, + INTEL_HID_DSM_HEBC_V1_FN, + INTEL_HID_DSM_VGBS_FN, + INTEL_HID_DSM_HEBC_V2_FN, + INTEL_HID_DSM_FN_MAX +}; + +static const char *intel_hid_dsm_fn_to_method[INTEL_HID_DSM_FN_MAX] = { + NULL, + "BTNL", + "HDMM", + "HDSM", + "HDEM", + "BTNS", + "BTNE", + "HEBC", + "VGBS", + "HEBC" +}; + +static unsigned long long intel_hid_dsm_fn_mask; +static guid_t intel_dsm_guid; + +static bool intel_hid_execute_method(acpi_handle handle, + enum intel_hid_dsm_fn_codes fn_index, + unsigned long long arg) +{ + union acpi_object *obj, argv4, req; + acpi_status status; + char *method_name; + + if (fn_index <= INTEL_HID_DSM_FN_INVALID || + fn_index >= INTEL_HID_DSM_FN_MAX) + return false; + + method_name = (char *)intel_hid_dsm_fn_to_method[fn_index]; + + if (!(intel_hid_dsm_fn_mask & BIT(fn_index))) + goto skip_dsm_exec; + + /* All methods expects a package with one integer element */ + req.type = ACPI_TYPE_INTEGER; + req.integer.value = arg; + + argv4.type = ACPI_TYPE_PACKAGE; + argv4.package.count = 1; + argv4.package.elements = &req; + + obj = acpi_evaluate_dsm(handle, &intel_dsm_guid, 1, fn_index, &argv4); + if (obj) { + acpi_handle_debug(handle, "Exec DSM Fn code: %d[%s] success\n", + fn_index, method_name); + ACPI_FREE(obj); + return true; + } + +skip_dsm_exec: + status = acpi_execute_simple_method(handle, method_name, arg); + if (ACPI_SUCCESS(status)) + return true; + + return false; +} + +static bool intel_hid_evaluate_method(acpi_handle handle, + enum intel_hid_dsm_fn_codes fn_index, + unsigned long long *result) +{ + union acpi_object *obj; + acpi_status status; + char *method_name; + + if (fn_index <= INTEL_HID_DSM_FN_INVALID || + fn_index >= INTEL_HID_DSM_FN_MAX) + return false; + + method_name = (char *)intel_hid_dsm_fn_to_method[fn_index]; + + if (!(intel_hid_dsm_fn_mask & BIT(fn_index))) + goto skip_dsm_eval; + + obj = acpi_evaluate_dsm_typed(handle, &intel_dsm_guid, + 1, fn_index, + NULL, ACPI_TYPE_INTEGER); + if (obj) { + *result = obj->integer.value; + acpi_handle_debug(handle, + "Eval DSM Fn code: %d[%s] results: 0x%llx\n", + fn_index, method_name, *result); + ACPI_FREE(obj); + return true; + } + +skip_dsm_eval: + status = acpi_evaluate_integer(handle, method_name, NULL, result); + if (ACPI_SUCCESS(status)) + return true; + + return false; +} + +static void intel_hid_init_dsm(acpi_handle handle) +{ + union acpi_object *obj; + + guid_parse(HID_EVENT_FILTER_UUID, &intel_dsm_guid); + + obj = acpi_evaluate_dsm_typed(handle, &intel_dsm_guid, 1, 0, NULL, + ACPI_TYPE_BUFFER); + if (obj) { + switch (obj->buffer.length) { + default: + case 2: + intel_hid_dsm_fn_mask = *(u16 *)obj->buffer.pointer; + break; + case 1: + intel_hid_dsm_fn_mask = *obj->buffer.pointer; + break; + case 0: + acpi_handle_warn(handle, "intel_hid_dsm_fn_mask length is zero\n"); + intel_hid_dsm_fn_mask = 0; + break; + } + ACPI_FREE(obj); + } + + acpi_handle_debug(handle, "intel_hid_dsm_fn_mask = %llx\n", + intel_hid_dsm_fn_mask); +} + +static int intel_hid_set_enable(struct device *device, bool enable) +{ + acpi_handle handle = ACPI_HANDLE(device); + + /* Enable|disable features - power button is always enabled */ + if (!intel_hid_execute_method(handle, INTEL_HID_DSM_HDSM_FN, + enable)) { + dev_warn(device, "failed to %sable hotkeys\n", + enable ? "en" : "dis"); + return -EIO; + } + + return 0; +} + +static void intel_button_array_enable(struct device *device, bool enable) +{ + struct intel_hid_priv *priv = dev_get_drvdata(device); + acpi_handle handle = ACPI_HANDLE(device); + unsigned long long button_cap; + acpi_status status; + + if (!priv->array) + return; + + /* Query supported platform features */ + status = acpi_evaluate_integer(handle, "BTNC", NULL, &button_cap); + if (ACPI_FAILURE(status)) { + dev_warn(device, "failed to get button capability\n"); + return; + } + + /* Enable|disable features - power button is always enabled */ + if (!intel_hid_execute_method(handle, INTEL_HID_DSM_BTNE_FN, + enable ? button_cap : 1)) + dev_warn(device, "failed to set button capability\n"); +} + +static int intel_hid_pm_prepare(struct device *device) +{ + if (device_may_wakeup(device)) { + struct intel_hid_priv *priv = dev_get_drvdata(device); + + priv->wakeup_mode = true; + } + return 0; +} + +static void intel_hid_pm_complete(struct device *device) +{ + struct intel_hid_priv *priv = dev_get_drvdata(device); + + priv->wakeup_mode = false; +} + +static int intel_hid_pl_suspend_handler(struct device *device) +{ + intel_button_array_enable(device, false); + + if (!pm_suspend_no_platform()) + intel_hid_set_enable(device, false); + + return 0; +} + +static int intel_hid_pl_resume_handler(struct device *device) +{ + intel_hid_pm_complete(device); + + if (!pm_suspend_no_platform()) + intel_hid_set_enable(device, true); + + intel_button_array_enable(device, true); + return 0; +} + +static const struct dev_pm_ops intel_hid_pl_pm_ops = { + .prepare = intel_hid_pm_prepare, + .complete = intel_hid_pm_complete, + .freeze = intel_hid_pl_suspend_handler, + .thaw = intel_hid_pl_resume_handler, + .restore = intel_hid_pl_resume_handler, + .suspend = intel_hid_pl_suspend_handler, + .resume = intel_hid_pl_resume_handler, +}; + +static int intel_hid_input_setup(struct platform_device *device) +{ + struct intel_hid_priv *priv = dev_get_drvdata(&device->dev); + int ret; + + priv->input_dev = devm_input_allocate_device(&device->dev); + if (!priv->input_dev) + return -ENOMEM; + + ret = sparse_keymap_setup(priv->input_dev, intel_hid_keymap, NULL); + if (ret) + return ret; + + priv->input_dev->name = "Intel HID events"; + priv->input_dev->id.bustype = BUS_HOST; + + return input_register_device(priv->input_dev); +} + +static int intel_button_array_input_setup(struct platform_device *device) +{ + struct intel_hid_priv *priv = dev_get_drvdata(&device->dev); + int ret; + + /* Setup input device for 5 button array */ + priv->array = devm_input_allocate_device(&device->dev); + if (!priv->array) + return -ENOMEM; + + ret = sparse_keymap_setup(priv->array, intel_array_keymap, NULL); + if (ret) + return ret; + + priv->array->name = "Intel HID 5 button array"; + priv->array->id.bustype = BUS_HOST; + + return input_register_device(priv->array); +} + +static int intel_hid_switches_setup(struct platform_device *device) +{ + struct intel_hid_priv *priv = dev_get_drvdata(&device->dev); + + /* Setup input device for switches */ + priv->switches = devm_input_allocate_device(&device->dev); + if (!priv->switches) + return -ENOMEM; + + __set_bit(EV_SW, priv->switches->evbit); + __set_bit(SW_TABLET_MODE, priv->switches->swbit); + + priv->switches->name = "Intel HID switches"; + priv->switches->id.bustype = BUS_HOST; + return input_register_device(priv->switches); +} + +static void report_tablet_mode_state(struct platform_device *device) +{ + struct intel_hid_priv *priv = dev_get_drvdata(&device->dev); + acpi_handle handle = ACPI_HANDLE(&device->dev); + unsigned long long vgbs; + int m; + + if (!intel_hid_evaluate_method(handle, INTEL_HID_DSM_VGBS_FN, &vgbs)) + return; + + m = !(vgbs & TABLET_MODE_FLAG); + input_report_switch(priv->switches, SW_TABLET_MODE, m); + input_sync(priv->switches); +} + +static bool report_tablet_mode_event(struct input_dev *input_dev, u32 event) +{ + if (!input_dev) + return false; + + switch (event) { + case 0xcc: + input_report_switch(input_dev, SW_TABLET_MODE, 1); + input_sync(input_dev); + return true; + case 0xcd: + input_report_switch(input_dev, SW_TABLET_MODE, 0); + input_sync(input_dev); + return true; + default: + return false; + } +} + +static void notify_handler(acpi_handle handle, u32 event, void *context) +{ + struct platform_device *device = context; + struct intel_hid_priv *priv = dev_get_drvdata(&device->dev); + unsigned long long ev_index; + int err; + + /* + * Some convertible have unreliable VGBS return which could cause incorrect + * SW_TABLET_MODE report, in these cases we enable support when receiving + * the first event instead of during driver setup. + */ + if (!priv->switches && priv->auto_add_switch && (event == 0xcc || event == 0xcd)) { + dev_info(&device->dev, "switch event received, enable switches supports\n"); + err = intel_hid_switches_setup(device); + if (err) + pr_err("Failed to setup Intel HID switches\n"); + } + + if (priv->wakeup_mode) { + /* + * Needed for wakeup from suspend-to-idle to work on some + * platforms that don't expose the 5-button array, but still + * send notifies with the power button event code to this + * device object on power button actions while suspended. + */ + if (event == 0xce) + goto wakeup; + + /* + * Some devices send (duplicate) tablet-mode events when moved + * around even though the mode has not changed; and they do this + * even when suspended. + * Update the switch state in case it changed and then return + * without waking up to avoid spurious wakeups. + */ + if (event == 0xcc || event == 0xcd) { + report_tablet_mode_event(priv->switches, event); + return; + } + + /* Wake up on 5-button array events only. */ + if (event == 0xc0 || !priv->array) + return; + + if (!sparse_keymap_entry_from_scancode(priv->array, event)) { + dev_info(&device->dev, "unknown event 0x%x\n", event); + return; + } + +wakeup: + pm_wakeup_hard_event(&device->dev); + + return; + } + + /* + * Needed for suspend to work on some platforms that don't expose + * the 5-button array, but still send notifies with power button + * event code to this device object on power button actions. + * + * Report the power button press and release. + */ + if (!priv->array) { + if (event == 0xce) { + input_report_key(priv->input_dev, KEY_POWER, 1); + input_sync(priv->input_dev); + return; + } + + if (event == 0xcf) { + input_report_key(priv->input_dev, KEY_POWER, 0); + input_sync(priv->input_dev); + return; + } + } + + if (report_tablet_mode_event(priv->switches, event)) + return; + + /* 0xC0 is for HID events, other values are for 5 button array */ + if (event != 0xc0) { + if (!priv->array || + !sparse_keymap_report_event(priv->array, event, 1, true)) + dev_dbg(&device->dev, "unknown event 0x%x\n", event); + return; + } + + if (!intel_hid_evaluate_method(handle, INTEL_HID_DSM_HDEM_FN, + &ev_index)) { + dev_warn(&device->dev, "failed to get event index\n"); + return; + } + + if (!sparse_keymap_report_event(priv->input_dev, ev_index, 1, true)) + dev_dbg(&device->dev, "unknown event index 0x%llx\n", + ev_index); +} + +static bool button_array_present(struct platform_device *device) +{ + acpi_handle handle = ACPI_HANDLE(&device->dev); + unsigned long long event_cap; + + if (intel_hid_evaluate_method(handle, INTEL_HID_DSM_HEBC_V2_FN, + &event_cap)) { + /* Check presence of 5 button array or v2 power button */ + if (event_cap & 0x60000) + return true; + } + + if (intel_hid_evaluate_method(handle, INTEL_HID_DSM_HEBC_V1_FN, + &event_cap)) { + if (event_cap & 0x20000) + return true; + } + + if (dmi_check_system(button_array_table)) + return true; + + return false; +} + +static int intel_hid_probe(struct platform_device *device) +{ + acpi_handle handle = ACPI_HANDLE(&device->dev); + unsigned long long mode, dummy; + struct intel_hid_priv *priv; + acpi_status status; + int err; + + intel_hid_init_dsm(handle); + + if (!intel_hid_evaluate_method(handle, INTEL_HID_DSM_HDMM_FN, &mode)) { + dev_warn(&device->dev, "failed to read mode\n"); + return -ENODEV; + } + + if (mode != 0) { + /* + * This driver only implements "simple" mode. There appear + * to be no other modes, but we should be paranoid and check + * for compatibility. + */ + dev_info(&device->dev, "platform is not in simple mode\n"); + return -ENODEV; + } + + priv = devm_kzalloc(&device->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + dev_set_drvdata(&device->dev, priv); + + /* See dual_accel_detect.h for more info on the dual_accel check. */ + priv->auto_add_switch = dmi_check_system(dmi_auto_add_switch) && !dual_accel_detect(); + + err = intel_hid_input_setup(device); + if (err) { + pr_err("Failed to setup Intel HID hotkeys\n"); + return err; + } + + /* Setup 5 button array */ + if (button_array_present(device)) { + dev_info(&device->dev, "platform supports 5 button array\n"); + err = intel_button_array_input_setup(device); + if (err) + pr_err("Failed to setup Intel 5 button array hotkeys\n"); + } + + /* Setup switches for devices that we know VGBS return correctly */ + if (dmi_check_system(dmi_vgbs_allow_list)) { + dev_info(&device->dev, "platform supports switches\n"); + err = intel_hid_switches_setup(device); + if (err) + pr_err("Failed to setup Intel HID switches\n"); + else + report_tablet_mode_state(device); + } + + status = acpi_install_notify_handler(handle, + ACPI_DEVICE_NOTIFY, + notify_handler, + device); + if (ACPI_FAILURE(status)) + return -EBUSY; + + err = intel_hid_set_enable(&device->dev, true); + if (err) + goto err_remove_notify; + + intel_button_array_enable(&device->dev, true); + + /* + * Call button load method to enable HID power button + * Always do this since it activates events on some devices without + * a button array too. + */ + if (!intel_hid_evaluate_method(handle, INTEL_HID_DSM_BTNL_FN, &dummy)) + dev_warn(&device->dev, "failed to enable HID power button\n"); + + device_init_wakeup(&device->dev, true); + /* + * In order for system wakeup to work, the EC GPE has to be marked as + * a wakeup one, so do that here (this setting will persist, but it has + * no effect until the wakeup mask is set for the EC GPE). + */ + acpi_ec_mark_gpe_for_wake(); + return 0; + +err_remove_notify: + acpi_remove_notify_handler(handle, ACPI_DEVICE_NOTIFY, notify_handler); + + return err; +} + +static int intel_hid_remove(struct platform_device *device) +{ + acpi_handle handle = ACPI_HANDLE(&device->dev); + + device_init_wakeup(&device->dev, false); + acpi_remove_notify_handler(handle, ACPI_DEVICE_NOTIFY, notify_handler); + intel_hid_set_enable(&device->dev, false); + intel_button_array_enable(&device->dev, false); + + /* + * Even if we failed to shut off the event stream, we can still + * safely detach from the device. + */ + return 0; +} + +static struct platform_driver intel_hid_pl_driver = { + .driver = { + .name = "intel-hid", + .acpi_match_table = intel_hid_ids, + .pm = &intel_hid_pl_pm_ops, + }, + .probe = intel_hid_probe, + .remove = intel_hid_remove, +}; + +/* + * Unfortunately, some laptops provide a _HID="INT33D5" device with + * _CID="PNP0C02". This causes the pnpacpi scan driver to claim the + * ACPI node, so no platform device will be created. The pnpacpi + * driver rejects this device in subsequent processing, so no physical + * node is created at all. + * + * As a workaround until the ACPI core figures out how to handle + * this corner case, manually ask the ACPI platform device code to + * claim the ACPI node. + */ +static acpi_status __init +check_acpi_dev(acpi_handle handle, u32 lvl, void *context, void **rv) +{ + const struct acpi_device_id *ids = context; + struct acpi_device *dev = acpi_fetch_acpi_dev(handle); + + if (dev && acpi_match_device_ids(dev, ids) == 0) + if (!IS_ERR_OR_NULL(acpi_create_platform_device(dev, NULL))) + dev_info(&dev->dev, + "intel-hid: created platform device\n"); + + return AE_OK; +} + +static int __init intel_hid_init(void) +{ + acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, check_acpi_dev, NULL, + (void *)intel_hid_ids, NULL); + + return platform_driver_register(&intel_hid_pl_driver); +} +module_init(intel_hid_init); + +static void __exit intel_hid_exit(void) +{ + platform_driver_unregister(&intel_hid_pl_driver); +} +module_exit(intel_hid_exit); diff --git a/drivers/platform/x86/intel/ifs/Kconfig b/drivers/platform/x86/intel/ifs/Kconfig new file mode 100644 index 000000000..c341a27cc --- /dev/null +++ b/drivers/platform/x86/intel/ifs/Kconfig @@ -0,0 +1,16 @@ +config INTEL_IFS + tristate "Intel In Field Scan" + depends on X86 && CPU_SUP_INTEL && 64BIT && SMP + # Discussion on the list has shown that the sysfs API needs a bit + # more work, mark this as broken for now + depends on BROKEN + select INTEL_IFS_DEVICE + help + Enable support for the In Field Scan capability in select + CPUs. The capability allows for running low level tests via + a scan image distributed by Intel via Github to validate CPU + operation beyond baseline RAS capabilities. To compile this + support as a module, choose M here. The module will be called + intel_ifs. + + If unsure, say N. diff --git a/drivers/platform/x86/intel/ifs/Makefile b/drivers/platform/x86/intel/ifs/Makefile new file mode 100644 index 000000000..30f035ef5 --- /dev/null +++ b/drivers/platform/x86/intel/ifs/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_INTEL_IFS) += intel_ifs.o + +intel_ifs-objs := core.o load.o runtest.o sysfs.o diff --git a/drivers/platform/x86/intel/ifs/core.c b/drivers/platform/x86/intel/ifs/core.c new file mode 100644 index 000000000..27204e3d6 --- /dev/null +++ b/drivers/platform/x86/intel/ifs/core.c @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright(c) 2022 Intel Corporation. */ + +#include <linux/module.h> +#include <linux/kdev_t.h> +#include <linux/semaphore.h> + +#include <asm/cpu_device_id.h> + +#include "ifs.h" + +#define X86_MATCH(model) \ + X86_MATCH_VENDOR_FAM_MODEL_FEATURE(INTEL, 6, \ + INTEL_FAM6_##model, X86_FEATURE_CORE_CAPABILITIES, NULL) + +static const struct x86_cpu_id ifs_cpu_ids[] __initconst = { + X86_MATCH(SAPPHIRERAPIDS_X), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, ifs_cpu_ids); + +static struct ifs_device ifs_device = { + .data = { + .integrity_cap_bit = MSR_INTEGRITY_CAPS_PERIODIC_BIST_BIT, + }, + .misc = { + .name = "intel_ifs_0", + .nodename = "intel_ifs/0", + .minor = MISC_DYNAMIC_MINOR, + }, +}; + +static int __init ifs_init(void) +{ + const struct x86_cpu_id *m; + u64 msrval; + + m = x86_match_cpu(ifs_cpu_ids); + if (!m) + return -ENODEV; + + if (rdmsrl_safe(MSR_IA32_CORE_CAPS, &msrval)) + return -ENODEV; + + if (!(msrval & MSR_IA32_CORE_CAPS_INTEGRITY_CAPS)) + return -ENODEV; + + if (rdmsrl_safe(MSR_INTEGRITY_CAPS, &msrval)) + return -ENODEV; + + ifs_device.misc.groups = ifs_get_groups(); + + if ((msrval & BIT(ifs_device.data.integrity_cap_bit)) && + !misc_register(&ifs_device.misc)) { + down(&ifs_sem); + ifs_load_firmware(ifs_device.misc.this_device); + up(&ifs_sem); + return 0; + } + + return -ENODEV; +} + +static void __exit ifs_exit(void) +{ + misc_deregister(&ifs_device.misc); +} + +module_init(ifs_init); +module_exit(ifs_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Intel In Field Scan (IFS) device"); diff --git a/drivers/platform/x86/intel/ifs/ifs.h b/drivers/platform/x86/intel/ifs/ifs.h new file mode 100644 index 000000000..73c8e91cf --- /dev/null +++ b/drivers/platform/x86/intel/ifs/ifs.h @@ -0,0 +1,234 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* Copyright(c) 2022 Intel Corporation. */ + +#ifndef _IFS_H_ +#define _IFS_H_ + +/** + * DOC: In-Field Scan + * + * ============= + * In-Field Scan + * ============= + * + * Introduction + * ------------ + * + * In Field Scan (IFS) is a hardware feature to run circuit level tests on + * a CPU core to detect problems that are not caught by parity or ECC checks. + * Future CPUs will support more than one type of test which will show up + * with a new platform-device instance-id, for now only .0 is exposed. + * + * + * IFS Image + * --------- + * + * Intel provides a firmware file containing the scan tests via + * github [#f1]_. Similar to microcode there is a separate file for each + * family-model-stepping. + * + * IFS Image Loading + * ----------------- + * + * The driver loads the tests into memory reserved BIOS local to each CPU + * socket in a two step process using writes to MSRs to first load the + * SHA hashes for the test. Then the tests themselves. Status MSRs provide + * feedback on the success/failure of these steps. When a new test file + * is installed it can be loaded by writing to the driver reload file:: + * + * # echo 1 > /sys/devices/virtual/misc/intel_ifs_0/reload + * + * Similar to microcode, the current version of the scan tests is stored + * in a fixed location: /lib/firmware/intel/ifs.0/family-model-stepping.scan + * + * Running tests + * ------------- + * + * Tests are run by the driver synchronizing execution of all threads on a + * core and then writing to the ACTIVATE_SCAN MSR on all threads. Instruction + * execution continues when: + * + * 1) All tests have completed. + * 2) Execution was interrupted. + * 3) A test detected a problem. + * + * Note that ALL THREADS ON THE CORE ARE EFFECTIVELY OFFLINE FOR THE + * DURATION OF THE TEST. This can be up to 200 milliseconds. If the system + * is running latency sensitive applications that cannot tolerate an + * interruption of this magnitude, the system administrator must arrange + * to migrate those applications to other cores before running a core test. + * It may also be necessary to redirect interrupts to other CPUs. + * + * In all cases reading the SCAN_STATUS MSR provides details on what + * happened. The driver makes the value of this MSR visible to applications + * via the "details" file (see below). Interrupted tests may be restarted. + * + * The IFS driver provides sysfs interfaces via /sys/devices/virtual/misc/intel_ifs_0/ + * to control execution: + * + * Test a specific core:: + * + * # echo <cpu#> > /sys/devices/virtual/misc/intel_ifs_0/run_test + * + * when HT is enabled any of the sibling cpu# can be specified to test + * its corresponding physical core. Since the tests are per physical core, + * the result of testing any thread is same. All siblings must be online + * to run a core test. It is only necessary to test one thread. + * + * For e.g. to test core corresponding to cpu5 + * + * # echo 5 > /sys/devices/virtual/misc/intel_ifs_0/run_test + * + * Results of the last test is provided in /sys:: + * + * $ cat /sys/devices/virtual/misc/intel_ifs_0/status + * pass + * + * Status can be one of pass, fail, untested + * + * Additional details of the last test is provided by the details file:: + * + * $ cat /sys/devices/virtual/misc/intel_ifs_0/details + * 0x8081 + * + * The details file reports the hex value of the SCAN_STATUS MSR. + * Hardware defined error codes are documented in volume 4 of the Intel + * Software Developer's Manual but the error_code field may contain one of + * the following driver defined software codes: + * + * +------+--------------------+ + * | 0xFD | Software timeout | + * +------+--------------------+ + * | 0xFE | Partial completion | + * +------+--------------------+ + * + * Driver design choices + * --------------------- + * + * 1) The ACTIVATE_SCAN MSR allows for running any consecutive subrange of + * available tests. But the driver always tries to run all tests and only + * uses the subrange feature to restart an interrupted test. + * + * 2) Hardware allows for some number of cores to be tested in parallel. + * The driver does not make use of this, it only tests one core at a time. + * + * .. [#f1] https://github.com/intel/TBD + */ +#include <linux/device.h> +#include <linux/miscdevice.h> + +#define MSR_COPY_SCAN_HASHES 0x000002c2 +#define MSR_SCAN_HASHES_STATUS 0x000002c3 +#define MSR_AUTHENTICATE_AND_COPY_CHUNK 0x000002c4 +#define MSR_CHUNKS_AUTHENTICATION_STATUS 0x000002c5 +#define MSR_ACTIVATE_SCAN 0x000002c6 +#define MSR_SCAN_STATUS 0x000002c7 +#define SCAN_NOT_TESTED 0 +#define SCAN_TEST_PASS 1 +#define SCAN_TEST_FAIL 2 + +/* MSR_SCAN_HASHES_STATUS bit fields */ +union ifs_scan_hashes_status { + u64 data; + struct { + u32 chunk_size :16; + u32 num_chunks :8; + u32 rsvd1 :8; + u32 error_code :8; + u32 rsvd2 :11; + u32 max_core_limit :12; + u32 valid :1; + }; +}; + +/* MSR_CHUNKS_AUTH_STATUS bit fields */ +union ifs_chunks_auth_status { + u64 data; + struct { + u32 valid_chunks :8; + u32 total_chunks :8; + u32 rsvd1 :16; + u32 error_code :8; + u32 rsvd2 :24; + }; +}; + +/* MSR_ACTIVATE_SCAN bit fields */ +union ifs_scan { + u64 data; + struct { + u32 start :8; + u32 stop :8; + u32 rsvd :16; + u32 delay :31; + u32 sigmce :1; + }; +}; + +/* MSR_SCAN_STATUS bit fields */ +union ifs_status { + u64 data; + struct { + u32 chunk_num :8; + u32 chunk_stop_index :8; + u32 rsvd1 :16; + u32 error_code :8; + u32 rsvd2 :22; + u32 control_error :1; + u32 signature_error :1; + }; +}; + +/* + * Driver populated error-codes + * 0xFD: Test timed out before completing all the chunks. + * 0xFE: not all scan chunks were executed. Maximum forward progress retries exceeded. + */ +#define IFS_SW_TIMEOUT 0xFD +#define IFS_SW_PARTIAL_COMPLETION 0xFE + +/** + * struct ifs_data - attributes related to intel IFS driver + * @integrity_cap_bit: MSR_INTEGRITY_CAPS bit enumerating this test + * @loaded_version: stores the currently loaded ifs image version. + * @loaded: If a valid test binary has been loaded into the memory + * @loading_error: Error occurred on another CPU while loading image + * @valid_chunks: number of chunks which could be validated. + * @status: it holds simple status pass/fail/untested + * @scan_details: opaque scan status code from h/w + */ +struct ifs_data { + int integrity_cap_bit; + int loaded_version; + bool loaded; + bool loading_error; + int valid_chunks; + int status; + u64 scan_details; +}; + +struct ifs_work { + struct work_struct w; + struct device *dev; +}; + +struct ifs_device { + struct ifs_data data; + struct miscdevice misc; +}; + +static inline struct ifs_data *ifs_get_data(struct device *dev) +{ + struct miscdevice *m = dev_get_drvdata(dev); + struct ifs_device *d = container_of(m, struct ifs_device, misc); + + return &d->data; +} + +void ifs_load_firmware(struct device *dev); +int do_core_test(int cpu, struct device *dev); +const struct attribute_group **ifs_get_groups(void); + +extern struct semaphore ifs_sem; + +#endif diff --git a/drivers/platform/x86/intel/ifs/load.c b/drivers/platform/x86/intel/ifs/load.c new file mode 100644 index 000000000..3e52b4eb1 --- /dev/null +++ b/drivers/platform/x86/intel/ifs/load.c @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright(c) 2022 Intel Corporation. */ + +#include <linux/firmware.h> +#include <asm/cpu.h> +#include <linux/slab.h> +#include <asm/microcode_intel.h> + +#include "ifs.h" + +struct ifs_header { + u32 header_ver; + u32 blob_revision; + u32 date; + u32 processor_sig; + u32 check_sum; + u32 loader_rev; + u32 processor_flags; + u32 metadata_size; + u32 total_size; + u32 fusa_info; + u64 reserved; +}; + +#define IFS_HEADER_SIZE (sizeof(struct ifs_header)) +static struct ifs_header *ifs_header_ptr; /* pointer to the ifs image header */ +static u64 ifs_hash_ptr; /* Address of ifs metadata (hash) */ +static u64 ifs_test_image_ptr; /* 256B aligned address of test pattern */ +static DECLARE_COMPLETION(ifs_done); + +static const char * const scan_hash_status[] = { + [0] = "No error reported", + [1] = "Attempt to copy scan hashes when copy already in progress", + [2] = "Secure Memory not set up correctly", + [3] = "FuSaInfo.ProgramID does not match or ff-mm-ss does not match", + [4] = "Reserved", + [5] = "Integrity check failed", + [6] = "Scan reload or test is in progress" +}; + +static const char * const scan_authentication_status[] = { + [0] = "No error reported", + [1] = "Attempt to authenticate a chunk which is already marked as authentic", + [2] = "Chunk authentication error. The hash of chunk did not match expected value" +}; + +/* + * To copy scan hashes and authenticate test chunks, the initiating cpu must point + * to the EDX:EAX to the test image in linear address. + * Run wrmsr(MSR_COPY_SCAN_HASHES) for scan hash copy and run wrmsr(MSR_AUTHENTICATE_AND_COPY_CHUNK) + * for scan hash copy and test chunk authentication. + */ +static void copy_hashes_authenticate_chunks(struct work_struct *work) +{ + struct ifs_work *local_work = container_of(work, struct ifs_work, w); + union ifs_scan_hashes_status hashes_status; + union ifs_chunks_auth_status chunk_status; + struct device *dev = local_work->dev; + int i, num_chunks, chunk_size; + struct ifs_data *ifsd; + u64 linear_addr, base; + u32 err_code; + + ifsd = ifs_get_data(dev); + /* run scan hash copy */ + wrmsrl(MSR_COPY_SCAN_HASHES, ifs_hash_ptr); + rdmsrl(MSR_SCAN_HASHES_STATUS, hashes_status.data); + + /* enumerate the scan image information */ + num_chunks = hashes_status.num_chunks; + chunk_size = hashes_status.chunk_size * 1024; + err_code = hashes_status.error_code; + + if (!hashes_status.valid) { + ifsd->loading_error = true; + if (err_code >= ARRAY_SIZE(scan_hash_status)) { + dev_err(dev, "invalid error code 0x%x for hash copy\n", err_code); + goto done; + } + dev_err(dev, "Hash copy error : %s", scan_hash_status[err_code]); + goto done; + } + + /* base linear address to the scan data */ + base = ifs_test_image_ptr; + + /* scan data authentication and copy chunks to secured memory */ + for (i = 0; i < num_chunks; i++) { + linear_addr = base + i * chunk_size; + linear_addr |= i; + + wrmsrl(MSR_AUTHENTICATE_AND_COPY_CHUNK, linear_addr); + rdmsrl(MSR_CHUNKS_AUTHENTICATION_STATUS, chunk_status.data); + + ifsd->valid_chunks = chunk_status.valid_chunks; + err_code = chunk_status.error_code; + + if (err_code) { + ifsd->loading_error = true; + if (err_code >= ARRAY_SIZE(scan_authentication_status)) { + dev_err(dev, + "invalid error code 0x%x for authentication\n", err_code); + goto done; + } + dev_err(dev, "Chunk authentication error %s\n", + scan_authentication_status[err_code]); + goto done; + } + } +done: + complete(&ifs_done); +} + +/* + * IFS requires scan chunks authenticated per each socket in the platform. + * Once the test chunk is authenticated, it is automatically copied to secured memory + * and proceed the authentication for the next chunk. + */ +static int scan_chunks_sanity_check(struct device *dev) +{ + int metadata_size, curr_pkg, cpu, ret = -ENOMEM; + struct ifs_data *ifsd = ifs_get_data(dev); + bool *package_authenticated; + struct ifs_work local_work; + char *test_ptr; + + package_authenticated = kcalloc(topology_max_packages(), sizeof(bool), GFP_KERNEL); + if (!package_authenticated) + return ret; + + metadata_size = ifs_header_ptr->metadata_size; + + /* Spec says that if the Meta Data Size = 0 then it should be treated as 2000 */ + if (metadata_size == 0) + metadata_size = 2000; + + /* Scan chunk start must be 256 byte aligned */ + if ((metadata_size + IFS_HEADER_SIZE) % 256) { + dev_err(dev, "Scan pattern offset within the binary is not 256 byte aligned\n"); + return -EINVAL; + } + + test_ptr = (char *)ifs_header_ptr + IFS_HEADER_SIZE + metadata_size; + ifsd->loading_error = false; + + ifs_test_image_ptr = (u64)test_ptr; + ifsd->loaded_version = ifs_header_ptr->blob_revision; + + /* copy the scan hash and authenticate per package */ + cpus_read_lock(); + for_each_online_cpu(cpu) { + curr_pkg = topology_physical_package_id(cpu); + if (package_authenticated[curr_pkg]) + continue; + reinit_completion(&ifs_done); + local_work.dev = dev; + INIT_WORK_ONSTACK(&local_work.w, copy_hashes_authenticate_chunks); + schedule_work_on(cpu, &local_work.w); + wait_for_completion(&ifs_done); + if (ifsd->loading_error) + goto out; + package_authenticated[curr_pkg] = 1; + } + ret = 0; +out: + cpus_read_unlock(); + kfree(package_authenticated); + + return ret; +} + +static int ifs_sanity_check(struct device *dev, + const struct microcode_header_intel *mc_header) +{ + unsigned long total_size, data_size; + u32 sum, *mc; + + total_size = get_totalsize(mc_header); + data_size = get_datasize(mc_header); + + if ((data_size + MC_HEADER_SIZE > total_size) || (total_size % sizeof(u32))) { + dev_err(dev, "bad ifs data file size.\n"); + return -EINVAL; + } + + if (mc_header->ldrver != 1 || mc_header->hdrver != 1) { + dev_err(dev, "invalid/unknown ifs update format.\n"); + return -EINVAL; + } + + mc = (u32 *)mc_header; + sum = 0; + for (int i = 0; i < total_size / sizeof(u32); i++) + sum += mc[i]; + + if (sum) { + dev_err(dev, "bad ifs data checksum, aborting.\n"); + return -EINVAL; + } + + return 0; +} + +static bool find_ifs_matching_signature(struct device *dev, struct ucode_cpu_info *uci, + const struct microcode_header_intel *shdr) +{ + unsigned int mc_size; + + mc_size = get_totalsize(shdr); + + if (!mc_size || ifs_sanity_check(dev, shdr) < 0) { + dev_err(dev, "ifs sanity check failure\n"); + return false; + } + + if (!intel_cpu_signatures_match(uci->cpu_sig.sig, uci->cpu_sig.pf, shdr->sig, shdr->pf)) { + dev_err(dev, "ifs signature, pf not matching\n"); + return false; + } + + return true; +} + +static bool ifs_image_sanity_check(struct device *dev, const struct microcode_header_intel *data) +{ + struct ucode_cpu_info uci; + + intel_cpu_collect_info(&uci); + + return find_ifs_matching_signature(dev, &uci, data); +} + +/* + * Load ifs image. Before loading ifs module, the ifs image must be located + * in /lib/firmware/intel/ifs and named as {family/model/stepping}.{testname}. + */ +void ifs_load_firmware(struct device *dev) +{ + struct ifs_data *ifsd = ifs_get_data(dev); + const struct firmware *fw; + char scan_path[32]; + int ret; + + snprintf(scan_path, sizeof(scan_path), "intel/ifs/%02x-%02x-%02x.scan", + boot_cpu_data.x86, boot_cpu_data.x86_model, boot_cpu_data.x86_stepping); + + ret = request_firmware_direct(&fw, scan_path, dev); + if (ret) { + dev_err(dev, "ifs file %s load failed\n", scan_path); + goto done; + } + + if (!ifs_image_sanity_check(dev, (struct microcode_header_intel *)fw->data)) { + dev_err(dev, "ifs header sanity check failed\n"); + goto release; + } + + ifs_header_ptr = (struct ifs_header *)fw->data; + ifs_hash_ptr = (u64)(ifs_header_ptr + 1); + + ret = scan_chunks_sanity_check(dev); +release: + release_firmware(fw); +done: + ifsd->loaded = (ret == 0); +} diff --git a/drivers/platform/x86/intel/ifs/runtest.c b/drivers/platform/x86/intel/ifs/runtest.c new file mode 100644 index 000000000..b2ca2bb45 --- /dev/null +++ b/drivers/platform/x86/intel/ifs/runtest.c @@ -0,0 +1,252 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright(c) 2022 Intel Corporation. */ + +#include <linux/cpu.h> +#include <linux/delay.h> +#include <linux/fs.h> +#include <linux/nmi.h> +#include <linux/slab.h> +#include <linux/stop_machine.h> + +#include "ifs.h" + +/* + * Note all code and data in this file is protected by + * ifs_sem. On HT systems all threads on a core will + * execute together, but only the first thread on the + * core will update results of the test. + */ + +#define CREATE_TRACE_POINTS +#include <trace/events/intel_ifs.h> + +/* Max retries on the same chunk */ +#define MAX_IFS_RETRIES 5 + +/* + * Number of TSC cycles that a logical CPU will wait for the other + * logical CPU on the core in the WRMSR(ACTIVATE_SCAN). + */ +#define IFS_THREAD_WAIT 100000 + +enum ifs_status_err_code { + IFS_NO_ERROR = 0, + IFS_OTHER_THREAD_COULD_NOT_JOIN = 1, + IFS_INTERRUPTED_BEFORE_RENDEZVOUS = 2, + IFS_POWER_MGMT_INADEQUATE_FOR_SCAN = 3, + IFS_INVALID_CHUNK_RANGE = 4, + IFS_MISMATCH_ARGUMENTS_BETWEEN_THREADS = 5, + IFS_CORE_NOT_CAPABLE_CURRENTLY = 6, + IFS_UNASSIGNED_ERROR_CODE = 7, + IFS_EXCEED_NUMBER_OF_THREADS_CONCURRENT = 8, + IFS_INTERRUPTED_DURING_EXECUTION = 9, +}; + +static const char * const scan_test_status[] = { + [IFS_NO_ERROR] = "SCAN no error", + [IFS_OTHER_THREAD_COULD_NOT_JOIN] = "Other thread could not join.", + [IFS_INTERRUPTED_BEFORE_RENDEZVOUS] = "Interrupt occurred prior to SCAN coordination.", + [IFS_POWER_MGMT_INADEQUATE_FOR_SCAN] = + "Core Abort SCAN Response due to power management condition.", + [IFS_INVALID_CHUNK_RANGE] = "Non valid chunks in the range", + [IFS_MISMATCH_ARGUMENTS_BETWEEN_THREADS] = "Mismatch in arguments between threads T0/T1.", + [IFS_CORE_NOT_CAPABLE_CURRENTLY] = "Core not capable of performing SCAN currently", + [IFS_UNASSIGNED_ERROR_CODE] = "Unassigned error code 0x7", + [IFS_EXCEED_NUMBER_OF_THREADS_CONCURRENT] = + "Exceeded number of Logical Processors (LP) allowed to run Scan-At-Field concurrently", + [IFS_INTERRUPTED_DURING_EXECUTION] = "Interrupt occurred prior to SCAN start", +}; + +static void message_not_tested(struct device *dev, int cpu, union ifs_status status) +{ + if (status.error_code < ARRAY_SIZE(scan_test_status)) { + dev_info(dev, "CPU(s) %*pbl: SCAN operation did not start. %s\n", + cpumask_pr_args(cpu_smt_mask(cpu)), + scan_test_status[status.error_code]); + } else if (status.error_code == IFS_SW_TIMEOUT) { + dev_info(dev, "CPU(s) %*pbl: software timeout during scan\n", + cpumask_pr_args(cpu_smt_mask(cpu))); + } else if (status.error_code == IFS_SW_PARTIAL_COMPLETION) { + dev_info(dev, "CPU(s) %*pbl: %s\n", + cpumask_pr_args(cpu_smt_mask(cpu)), + "Not all scan chunks were executed. Maximum forward progress retries exceeded"); + } else { + dev_info(dev, "CPU(s) %*pbl: SCAN unknown status %llx\n", + cpumask_pr_args(cpu_smt_mask(cpu)), status.data); + } +} + +static void message_fail(struct device *dev, int cpu, union ifs_status status) +{ + /* + * control_error is set when the microcode runs into a problem + * loading the image from the reserved BIOS memory, or it has + * been corrupted. Reloading the image may fix this issue. + */ + if (status.control_error) { + dev_err(dev, "CPU(s) %*pbl: could not execute from loaded scan image\n", + cpumask_pr_args(cpu_smt_mask(cpu))); + } + + /* + * signature_error is set when the output from the scan chains does not + * match the expected signature. This might be a transient problem (e.g. + * due to a bit flip from an alpha particle or neutron). If the problem + * repeats on a subsequent test, then it indicates an actual problem in + * the core being tested. + */ + if (status.signature_error) { + dev_err(dev, "CPU(s) %*pbl: test signature incorrect.\n", + cpumask_pr_args(cpu_smt_mask(cpu))); + } +} + +static bool can_restart(union ifs_status status) +{ + enum ifs_status_err_code err_code = status.error_code; + + /* Signature for chunk is bad, or scan test failed */ + if (status.signature_error || status.control_error) + return false; + + switch (err_code) { + case IFS_NO_ERROR: + case IFS_OTHER_THREAD_COULD_NOT_JOIN: + case IFS_INTERRUPTED_BEFORE_RENDEZVOUS: + case IFS_POWER_MGMT_INADEQUATE_FOR_SCAN: + case IFS_EXCEED_NUMBER_OF_THREADS_CONCURRENT: + case IFS_INTERRUPTED_DURING_EXECUTION: + return true; + case IFS_INVALID_CHUNK_RANGE: + case IFS_MISMATCH_ARGUMENTS_BETWEEN_THREADS: + case IFS_CORE_NOT_CAPABLE_CURRENTLY: + case IFS_UNASSIGNED_ERROR_CODE: + break; + } + return false; +} + +/* + * Execute the scan. Called "simultaneously" on all threads of a core + * at high priority using the stop_cpus mechanism. + */ +static int doscan(void *data) +{ + int cpu = smp_processor_id(); + u64 *msrs = data; + int first; + + /* Only the first logical CPU on a core reports result */ + first = cpumask_first(cpu_smt_mask(cpu)); + + /* + * This WRMSR will wait for other HT threads to also write + * to this MSR (at most for activate.delay cycles). Then it + * starts scan of each requested chunk. The core scan happens + * during the "execution" of the WRMSR. This instruction can + * take up to 200 milliseconds (in the case where all chunks + * are processed in a single pass) before it retires. + */ + wrmsrl(MSR_ACTIVATE_SCAN, msrs[0]); + + if (cpu == first) { + /* Pass back the result of the scan */ + rdmsrl(MSR_SCAN_STATUS, msrs[1]); + } + + return 0; +} + +/* + * Use stop_core_cpuslocked() to synchronize writing to MSR_ACTIVATE_SCAN + * on all threads of the core to be tested. Loop if necessary to complete + * run of all chunks. Include some defensive tests to make sure forward + * progress is made, and that the whole test completes in a reasonable time. + */ +static void ifs_test_core(int cpu, struct device *dev) +{ + union ifs_scan activate; + union ifs_status status; + unsigned long timeout; + struct ifs_data *ifsd; + u64 msrvals[2]; + int retries; + + ifsd = ifs_get_data(dev); + + activate.rsvd = 0; + activate.delay = IFS_THREAD_WAIT; + activate.sigmce = 0; + activate.start = 0; + activate.stop = ifsd->valid_chunks - 1; + + timeout = jiffies + HZ / 2; + retries = MAX_IFS_RETRIES; + + while (activate.start <= activate.stop) { + if (time_after(jiffies, timeout)) { + status.error_code = IFS_SW_TIMEOUT; + break; + } + + msrvals[0] = activate.data; + stop_core_cpuslocked(cpu, doscan, msrvals); + + status.data = msrvals[1]; + + trace_ifs_status(cpu, activate, status); + + /* Some cases can be retried, give up for others */ + if (!can_restart(status)) + break; + + if (status.chunk_num == activate.start) { + /* Check for forward progress */ + if (--retries == 0) { + if (status.error_code == IFS_NO_ERROR) + status.error_code = IFS_SW_PARTIAL_COMPLETION; + break; + } + } else { + retries = MAX_IFS_RETRIES; + activate.start = status.chunk_num; + } + } + + /* Update status for this core */ + ifsd->scan_details = status.data; + + if (status.control_error || status.signature_error) { + ifsd->status = SCAN_TEST_FAIL; + message_fail(dev, cpu, status); + } else if (status.error_code) { + ifsd->status = SCAN_NOT_TESTED; + message_not_tested(dev, cpu, status); + } else { + ifsd->status = SCAN_TEST_PASS; + } +} + +/* + * Initiate per core test. It wakes up work queue threads on the target cpu and + * its sibling cpu. Once all sibling threads wake up, the scan test gets executed and + * wait for all sibling threads to finish the scan test. + */ +int do_core_test(int cpu, struct device *dev) +{ + int ret = 0; + + /* Prevent CPUs from being taken offline during the scan test */ + cpus_read_lock(); + + if (!cpu_online(cpu)) { + dev_info(dev, "cannot test on the offline cpu %d\n", cpu); + ret = -EINVAL; + goto out; + } + + ifs_test_core(cpu, dev); +out: + cpus_read_unlock(); + return ret; +} diff --git a/drivers/platform/x86/intel/ifs/sysfs.c b/drivers/platform/x86/intel/ifs/sysfs.c new file mode 100644 index 000000000..37d8380d6 --- /dev/null +++ b/drivers/platform/x86/intel/ifs/sysfs.c @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright(c) 2022 Intel Corporation. */ + +#include <linux/cpu.h> +#include <linux/delay.h> +#include <linux/fs.h> +#include <linux/semaphore.h> +#include <linux/slab.h> + +#include "ifs.h" + +/* + * Protects against simultaneous tests on multiple cores, or + * reloading can file while a test is in progress + */ +DEFINE_SEMAPHORE(ifs_sem); + +/* + * The sysfs interface to check additional details of last test + * cat /sys/devices/system/platform/ifs/details + */ +static ssize_t details_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct ifs_data *ifsd = ifs_get_data(dev); + + return sysfs_emit(buf, "%#llx\n", ifsd->scan_details); +} + +static DEVICE_ATTR_RO(details); + +static const char * const status_msg[] = { + [SCAN_NOT_TESTED] = "untested", + [SCAN_TEST_PASS] = "pass", + [SCAN_TEST_FAIL] = "fail" +}; + +/* + * The sysfs interface to check the test status: + * To check the status of last test + * cat /sys/devices/platform/ifs/status + */ +static ssize_t status_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct ifs_data *ifsd = ifs_get_data(dev); + + return sysfs_emit(buf, "%s\n", status_msg[ifsd->status]); +} + +static DEVICE_ATTR_RO(status); + +/* + * The sysfs interface for single core testing + * To start test, for example, cpu5 + * echo 5 > /sys/devices/platform/ifs/run_test + * To check the result: + * cat /sys/devices/platform/ifs/result + * The sibling core gets tested at the same time. + */ +static ssize_t run_test_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ifs_data *ifsd = ifs_get_data(dev); + unsigned int cpu; + int rc; + + rc = kstrtouint(buf, 0, &cpu); + if (rc < 0 || cpu >= nr_cpu_ids) + return -EINVAL; + + if (down_interruptible(&ifs_sem)) + return -EINTR; + + if (!ifsd->loaded) + rc = -EPERM; + else + rc = do_core_test(cpu, dev); + + up(&ifs_sem); + + return rc ? rc : count; +} + +static DEVICE_ATTR_WO(run_test); + +/* + * Reload the IFS image. When user wants to install new IFS image + */ +static ssize_t reload_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ifs_data *ifsd = ifs_get_data(dev); + bool res; + + + if (kstrtobool(buf, &res)) + return -EINVAL; + if (!res) + return count; + + if (down_interruptible(&ifs_sem)) + return -EINTR; + + ifs_load_firmware(dev); + + up(&ifs_sem); + + return ifsd->loaded ? count : -ENODEV; +} + +static DEVICE_ATTR_WO(reload); + +/* + * Display currently loaded IFS image version. + */ +static ssize_t image_version_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ifs_data *ifsd = ifs_get_data(dev); + + if (!ifsd->loaded) + return sysfs_emit(buf, "%s\n", "none"); + else + return sysfs_emit(buf, "%#x\n", ifsd->loaded_version); +} + +static DEVICE_ATTR_RO(image_version); + +/* global scan sysfs attributes */ +static struct attribute *plat_ifs_attrs[] = { + &dev_attr_details.attr, + &dev_attr_status.attr, + &dev_attr_run_test.attr, + &dev_attr_reload.attr, + &dev_attr_image_version.attr, + NULL +}; + +ATTRIBUTE_GROUPS(plat_ifs); + +const struct attribute_group **ifs_get_groups(void) +{ + return plat_ifs_groups; +} diff --git a/drivers/platform/x86/intel/int0002_vgpio.c b/drivers/platform/x86/intel/int0002_vgpio.c new file mode 100644 index 000000000..97cfbc520 --- /dev/null +++ b/drivers/platform/x86/intel/int0002_vgpio.c @@ -0,0 +1,283 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel INT0002 "Virtual GPIO" driver + * + * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com> + * + * Loosely based on android x86 kernel code which is: + * + * Copyright (c) 2014, Intel Corporation. + * + * Author: Dyut Kumar Sil <dyut.k.sil@intel.com> + * + * Some peripherals on Bay Trail and Cherry Trail platforms signal a Power + * Management Event (PME) to the Power Management Controller (PMC) to wakeup + * the system. When this happens software needs to clear the PME bus 0 status + * bit in the GPE0a_STS register to avoid an IRQ storm on IRQ 9. + * + * This is modelled in ACPI through the INT0002 ACPI device, which is + * called a "Virtual GPIO controller" in ACPI because it defines the event + * handler to call when the PME triggers through _AEI and _L02 / _E02 + * methods as would be done for a real GPIO interrupt in ACPI. Note this + * is a hack to define an AML event handler for the PME while using existing + * ACPI mechanisms, this is not a real GPIO at all. + * + * This driver will bind to the INT0002 device, and register as a GPIO + * controller, letting gpiolib-acpi.c call the _L02 handler as it would + * for a real GPIO controller. + */ + +#include <linux/acpi.h> +#include <linux/bitmap.h> +#include <linux/gpio/driver.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_data/x86/soc.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/suspend.h> + +#define DRV_NAME "INT0002 Virtual GPIO" + +/* For some reason the virtual GPIO pin tied to the GPE is numbered pin 2 */ +#define GPE0A_PME_B0_VIRT_GPIO_PIN 2 + +#define GPE0A_PME_B0_STS_BIT BIT(13) +#define GPE0A_PME_B0_EN_BIT BIT(13) +#define GPE0A_STS_PORT 0x420 +#define GPE0A_EN_PORT 0x428 + +struct int0002_data { + struct gpio_chip chip; + int parent_irq; + int wake_enable_count; +}; + +/* + * As this is not a real GPIO at all, but just a hack to model an event in + * ACPI the get / set functions are dummy functions. + */ + +static int int0002_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + return 0; +} + +static void int0002_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ +} + +static int int0002_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + return 0; +} + +static void int0002_irq_ack(struct irq_data *data) +{ + outl(GPE0A_PME_B0_STS_BIT, GPE0A_STS_PORT); +} + +static void int0002_irq_unmask(struct irq_data *data) +{ + u32 gpe_en_reg; + + gpe_en_reg = inl(GPE0A_EN_PORT); + gpe_en_reg |= GPE0A_PME_B0_EN_BIT; + outl(gpe_en_reg, GPE0A_EN_PORT); +} + +static void int0002_irq_mask(struct irq_data *data) +{ + u32 gpe_en_reg; + + gpe_en_reg = inl(GPE0A_EN_PORT); + gpe_en_reg &= ~GPE0A_PME_B0_EN_BIT; + outl(gpe_en_reg, GPE0A_EN_PORT); +} + +static int int0002_irq_set_wake(struct irq_data *data, unsigned int on) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct int0002_data *int0002 = container_of(chip, struct int0002_data, chip); + + /* + * Applying of the wakeup flag to our parent IRQ is delayed till system + * suspend, because we only want to do this when using s2idle. + */ + if (on) + int0002->wake_enable_count++; + else + int0002->wake_enable_count--; + + return 0; +} + +static irqreturn_t int0002_irq(int irq, void *data) +{ + struct gpio_chip *chip = data; + u32 gpe_sts_reg; + + gpe_sts_reg = inl(GPE0A_STS_PORT); + if (!(gpe_sts_reg & GPE0A_PME_B0_STS_BIT)) + return IRQ_NONE; + + generic_handle_domain_irq_safe(chip->irq.domain, GPE0A_PME_B0_VIRT_GPIO_PIN); + + pm_wakeup_hard_event(chip->parent); + + return IRQ_HANDLED; +} + +static bool int0002_check_wake(void *data) +{ + u32 gpe_sts_reg; + + gpe_sts_reg = inl(GPE0A_STS_PORT); + return (gpe_sts_reg & GPE0A_PME_B0_STS_BIT); +} + +static struct irq_chip int0002_irqchip = { + .name = DRV_NAME, + .irq_ack = int0002_irq_ack, + .irq_mask = int0002_irq_mask, + .irq_unmask = int0002_irq_unmask, + .irq_set_wake = int0002_irq_set_wake, +}; + +static void int0002_init_irq_valid_mask(struct gpio_chip *chip, + unsigned long *valid_mask, + unsigned int ngpios) +{ + bitmap_clear(valid_mask, 0, GPE0A_PME_B0_VIRT_GPIO_PIN); +} + +static int int0002_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct int0002_data *int0002; + struct gpio_irq_chip *girq; + struct gpio_chip *chip; + int irq, ret; + + /* Menlow has a different INT0002 device? <sigh> */ + if (!soc_intel_is_byt() && !soc_intel_is_cht()) + return -ENODEV; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + int0002 = devm_kzalloc(dev, sizeof(*int0002), GFP_KERNEL); + if (!int0002) + return -ENOMEM; + + int0002->parent_irq = irq; + + chip = &int0002->chip; + chip->label = DRV_NAME; + chip->parent = dev; + chip->owner = THIS_MODULE; + chip->get = int0002_gpio_get; + chip->set = int0002_gpio_set; + chip->direction_input = int0002_gpio_get; + chip->direction_output = int0002_gpio_direction_output; + chip->base = -1; + chip->ngpio = GPE0A_PME_B0_VIRT_GPIO_PIN + 1; + chip->irq.init_valid_mask = int0002_init_irq_valid_mask; + + /* + * We directly request the irq here instead of passing a flow-handler + * to gpiochip_set_chained_irqchip, because the irq is shared. + * FIXME: augment this if we managed to pull handling of shared + * IRQs into gpiolib. + */ + ret = devm_request_irq(dev, irq, int0002_irq, + IRQF_SHARED, "INT0002", chip); + if (ret) { + dev_err(dev, "Error requesting IRQ %d: %d\n", irq, ret); + return ret; + } + + girq = &chip->irq; + girq->chip = &int0002_irqchip; + /* This let us handle the parent IRQ in the driver */ + girq->parent_handler = NULL; + girq->num_parents = 0; + girq->parents = NULL; + girq->default_type = IRQ_TYPE_NONE; + girq->handler = handle_edge_irq; + + ret = devm_gpiochip_add_data(dev, chip, NULL); + if (ret) { + dev_err(dev, "Error adding gpio chip: %d\n", ret); + return ret; + } + + acpi_register_wakeup_handler(irq, int0002_check_wake, NULL); + device_init_wakeup(dev, true); + dev_set_drvdata(dev, int0002); + return 0; +} + +static int int0002_remove(struct platform_device *pdev) +{ + device_init_wakeup(&pdev->dev, false); + acpi_unregister_wakeup_handler(int0002_check_wake, NULL); + return 0; +} + +static int int0002_suspend(struct device *dev) +{ + struct int0002_data *int0002 = dev_get_drvdata(dev); + + /* + * The INT0002 parent IRQ is often shared with the ACPI GPE IRQ, don't + * muck with it when firmware based suspend is used, otherwise we may + * cause spurious wakeups from firmware managed suspend. + */ + if (!pm_suspend_via_firmware() && int0002->wake_enable_count) + enable_irq_wake(int0002->parent_irq); + + return 0; +} + +static int int0002_resume(struct device *dev) +{ + struct int0002_data *int0002 = dev_get_drvdata(dev); + + if (!pm_suspend_via_firmware() && int0002->wake_enable_count) + disable_irq_wake(int0002->parent_irq); + + return 0; +} + +static const struct dev_pm_ops int0002_pm_ops = { + .suspend = int0002_suspend, + .resume = int0002_resume, +}; + +static const struct acpi_device_id int0002_acpi_ids[] = { + { "INT0002", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, int0002_acpi_ids); + +static struct platform_driver int0002_driver = { + .driver = { + .name = DRV_NAME, + .acpi_match_table = int0002_acpi_ids, + .pm = &int0002_pm_ops, + }, + .probe = int0002_probe, + .remove = int0002_remove, +}; + +module_platform_driver(int0002_driver); + +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); +MODULE_DESCRIPTION("Intel INT0002 Virtual GPIO driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/platform/x86/intel/int1092/Kconfig b/drivers/platform/x86/intel/int1092/Kconfig new file mode 100644 index 000000000..2e9a17724 --- /dev/null +++ b/drivers/platform/x86/intel/int1092/Kconfig @@ -0,0 +1,14 @@ +config INTEL_SAR_INT1092 + tristate "Intel Specific Absorption Rate Driver" + depends on ACPI + help + This driver helps to limit the exposure of human body to RF frequency by + providing information to userspace application that will inform the Intel + M.2 modem to regulate the RF power based on SAR data obtained from the + sensors captured in the BIOS. ACPI interface exposes this data from the BIOS + to SAR driver. The front end application in userspace will interact with SAR + driver to obtain information like the device mode, Antenna index, baseband index, + SAR table index and use available communication like MBIM interface to enable + data communication to modem for RF power regulation. Enable this config when + given platform needs to support "Dynamic SAR" configuration for a modem available + on the platform. diff --git a/drivers/platform/x86/intel/int1092/Makefile b/drivers/platform/x86/intel/int1092/Makefile new file mode 100644 index 000000000..4ab94e541 --- /dev/null +++ b/drivers/platform/x86/intel/int1092/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_INTEL_SAR_INT1092) += intel_sar.o diff --git a/drivers/platform/x86/intel/int1092/intel_sar.c b/drivers/platform/x86/intel/int1092/intel_sar.c new file mode 100644 index 000000000..e03943e63 --- /dev/null +++ b/drivers/platform/x86/intel/int1092/intel_sar.c @@ -0,0 +1,323 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2021, Intel Corporation. + */ + +#include <linux/acpi.h> +#include <linux/kobject.h> +#include <linux/platform_device.h> +#include <linux/sysfs.h> +#include "intel_sar.h" + +/** + * get_int_value: Retrieve integer values from ACPI Object + * @obj: acpi_object pointer which has the integer value + * @out: output pointer will get integer value + * + * Function is used to retrieve integer value from acpi object. + * + * Return: + * * 0 on success + * * -EIO if there is an issue in acpi_object passed. + */ +static int get_int_value(union acpi_object *obj, int *out) +{ + if (!obj || obj->type != ACPI_TYPE_INTEGER) + return -EIO; + *out = (int)obj->integer.value; + return 0; +} + +/** + * update_sar_data: sar data is updated based on regulatory mode + * @context: pointer to driver context structure + * + * sar_data is updated based on regulatory value + * context->reg_value will never exceed MAX_REGULATORY + */ +static void update_sar_data(struct wwan_sar_context *context) +{ + struct wwan_device_mode_configuration *config = + &context->config_data[context->reg_value]; + + if (config->device_mode_info && + context->sar_data.device_mode < config->total_dev_mode) { + int itr = 0; + + for (itr = 0; itr < config->total_dev_mode; itr++) { + if (context->sar_data.device_mode == + config->device_mode_info[itr].device_mode) { + struct wwan_device_mode_info *dev_mode = + &config->device_mode_info[itr]; + + context->sar_data.antennatable_index = dev_mode->antennatable_index; + context->sar_data.bandtable_index = dev_mode->bandtable_index; + context->sar_data.sartable_index = dev_mode->sartable_index; + break; + } + } + } +} + +/** + * parse_package: parse acpi package for retrieving SAR information + * @context: pointer to driver context structure + * @item : acpi_object pointer + * + * Given acpi_object is iterated to retrieve information for each device mode. + * If a given package corresponding to a specific device mode is faulty, it is + * skipped and the specific entry in context structure will have the default value + * of zero. Decoding of subsequent device modes is realized by having "continue" + * statements in the for loop on encountering error in parsing given device mode. + * + * Return: + * AE_OK if success + * AE_ERROR on error + */ +static acpi_status parse_package(struct wwan_sar_context *context, union acpi_object *item) +{ + struct wwan_device_mode_configuration *data; + int value, itr, reg; + union acpi_object *num; + + num = &item->package.elements[0]; + if (get_int_value(num, &value) || value < 0 || value >= MAX_REGULATORY) + return AE_ERROR; + + reg = value; + + data = &context->config_data[reg]; + if (data->total_dev_mode > MAX_DEV_MODES || data->total_dev_mode == 0 || + item->package.count <= data->total_dev_mode) + return AE_ERROR; + + data->device_mode_info = kmalloc_array(data->total_dev_mode, + sizeof(struct wwan_device_mode_info), GFP_KERNEL); + if (!data->device_mode_info) + return AE_ERROR; + + for (itr = 0; itr < data->total_dev_mode; itr++) { + struct wwan_device_mode_info temp = { 0 }; + + num = &item->package.elements[itr + 1]; + if (num->type != ACPI_TYPE_PACKAGE || num->package.count < TOTAL_DATA) + continue; + if (get_int_value(&num->package.elements[0], &temp.device_mode)) + continue; + if (get_int_value(&num->package.elements[1], &temp.bandtable_index)) + continue; + if (get_int_value(&num->package.elements[2], &temp.antennatable_index)) + continue; + if (get_int_value(&num->package.elements[3], &temp.sartable_index)) + continue; + data->device_mode_info[itr] = temp; + } + return AE_OK; +} + +/** + * sar_get_device_mode: Extraction of information from BIOS via DSM calls + * @device: ACPI device for which to retrieve the data + * + * Retrieve the current device mode information from the BIOS. + * + * Return: + * AE_OK on success + * AE_ERROR on error + */ +static acpi_status sar_get_device_mode(struct platform_device *device) +{ + struct wwan_sar_context *context = dev_get_drvdata(&device->dev); + acpi_status status = AE_OK; + union acpi_object *out; + u32 rev = 0; + int value; + + out = acpi_evaluate_dsm(context->handle, &context->guid, rev, + COMMAND_ID_DEV_MODE, NULL); + if (get_int_value(out, &value)) { + dev_err(&device->dev, "DSM cmd:%d Failed to retrieve value\n", COMMAND_ID_DEV_MODE); + status = AE_ERROR; + goto dev_mode_error; + } + context->sar_data.device_mode = value; + update_sar_data(context); + sysfs_notify(&device->dev.kobj, NULL, SYSFS_DATANAME); + +dev_mode_error: + ACPI_FREE(out); + return status; +} + +static const struct acpi_device_id sar_device_ids[] = { + { "INTC1092", 0}, + {} +}; +MODULE_DEVICE_TABLE(acpi, sar_device_ids); + +static ssize_t intc_data_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct wwan_sar_context *context = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%d %d %d %d\n", context->sar_data.device_mode, + context->sar_data.bandtable_index, + context->sar_data.antennatable_index, + context->sar_data.sartable_index); +} +static DEVICE_ATTR_RO(intc_data); + +static ssize_t intc_reg_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct wwan_sar_context *context = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%d\n", context->reg_value); +} + +static ssize_t intc_reg_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct wwan_sar_context *context = dev_get_drvdata(dev); + unsigned int value; + int read; + + if (!count) + return -EINVAL; + read = kstrtouint(buf, 10, &value); + if (read < 0) + return read; + if (value >= MAX_REGULATORY) + return -EOVERFLOW; + context->reg_value = value; + update_sar_data(context); + sysfs_notify(&dev->kobj, NULL, SYSFS_DATANAME); + return count; +} +static DEVICE_ATTR_RW(intc_reg); + +static struct attribute *intcsar_attrs[] = { + &dev_attr_intc_data.attr, + &dev_attr_intc_reg.attr, + NULL +}; + +static struct attribute_group intcsar_group = { + .attrs = intcsar_attrs, +}; + +static void sar_notify(acpi_handle handle, u32 event, void *data) +{ + struct platform_device *device = data; + + if (event == SAR_EVENT) { + if (sar_get_device_mode(device) != AE_OK) + dev_err(&device->dev, "sar_get_device_mode error"); + } +} + +static void sar_get_data(int reg, struct wwan_sar_context *context) +{ + union acpi_object *out, req; + u32 rev = 0; + + req.type = ACPI_TYPE_INTEGER; + req.integer.value = reg; + out = acpi_evaluate_dsm(context->handle, &context->guid, rev, + COMMAND_ID_CONFIG_TABLE, &req); + if (!out) + return; + if (out->type == ACPI_TYPE_PACKAGE && out->package.count >= 3 && + out->package.elements[0].type == ACPI_TYPE_INTEGER && + out->package.elements[1].type == ACPI_TYPE_INTEGER && + out->package.elements[2].type == ACPI_TYPE_PACKAGE && + out->package.elements[2].package.count > 0) { + context->config_data[reg].version = out->package.elements[0].integer.value; + context->config_data[reg].total_dev_mode = + out->package.elements[1].integer.value; + if (context->config_data[reg].total_dev_mode <= 0 || + context->config_data[reg].total_dev_mode > MAX_DEV_MODES) { + ACPI_FREE(out); + return; + } + parse_package(context, &out->package.elements[2]); + } + ACPI_FREE(out); +} + +static int sar_probe(struct platform_device *device) +{ + struct wwan_sar_context *context; + int reg; + int result; + + context = kzalloc(sizeof(*context), GFP_KERNEL); + if (!context) + return -ENOMEM; + + context->sar_device = device; + context->handle = ACPI_HANDLE(&device->dev); + dev_set_drvdata(&device->dev, context); + + result = guid_parse(SAR_DSM_UUID, &context->guid); + if (result) { + dev_err(&device->dev, "SAR UUID parse error: %d\n", result); + goto r_free; + } + + for (reg = 0; reg < MAX_REGULATORY; reg++) + sar_get_data(reg, context); + + if (sar_get_device_mode(device) != AE_OK) { + dev_err(&device->dev, "Failed to get device mode\n"); + result = -EIO; + goto r_free; + } + + result = sysfs_create_group(&device->dev.kobj, &intcsar_group); + if (result) { + dev_err(&device->dev, "sysfs creation failed\n"); + goto r_free; + } + + if (acpi_install_notify_handler(ACPI_HANDLE(&device->dev), ACPI_DEVICE_NOTIFY, + sar_notify, (void *)device) != AE_OK) { + dev_err(&device->dev, "Failed acpi_install_notify_handler\n"); + result = -EIO; + goto r_sys; + } + return 0; + +r_sys: + sysfs_remove_group(&device->dev.kobj, &intcsar_group); +r_free: + kfree(context); + return result; +} + +static int sar_remove(struct platform_device *device) +{ + struct wwan_sar_context *context = dev_get_drvdata(&device->dev); + int reg; + + acpi_remove_notify_handler(ACPI_HANDLE(&device->dev), + ACPI_DEVICE_NOTIFY, sar_notify); + sysfs_remove_group(&device->dev.kobj, &intcsar_group); + for (reg = 0; reg < MAX_REGULATORY; reg++) + kfree(context->config_data[reg].device_mode_info); + + kfree(context); + return 0; +} + +static struct platform_driver sar_driver = { + .probe = sar_probe, + .remove = sar_remove, + .driver = { + .name = DRVNAME, + .acpi_match_table = ACPI_PTR(sar_device_ids) + } +}; +module_platform_driver(sar_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Platform device driver for INTEL MODEM BIOS SAR"); +MODULE_AUTHOR("Shravan Sudhakar <s.shravan@intel.com>"); diff --git a/drivers/platform/x86/intel/int1092/intel_sar.h b/drivers/platform/x86/intel/int1092/intel_sar.h new file mode 100644 index 000000000..b5310510b --- /dev/null +++ b/drivers/platform/x86/intel/int1092/intel_sar.h @@ -0,0 +1,86 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2021, Intel Corporation. + */ +#ifndef INTEL_SAR_H +#define INTEL_SAR_H + +#define COMMAND_ID_DEV_MODE 1 +#define COMMAND_ID_CONFIG_TABLE 2 +#define DRVNAME "intc_sar" +#define MAX_DEV_MODES 50 +#define MAX_REGULATORY 3 +#define SAR_DSM_UUID "82737E72-3A33-4C45-A9C7-57C0411A5F13" +#define SAR_EVENT 0x80 +#define SYSFS_DATANAME "intc_data" +#define TOTAL_DATA 4 + +/** + * Structure wwan_device_mode_info - device mode information + * Holds the data that needs to be passed to userspace. + * The data is updated from the BIOS sensor information. + * @device_mode: Specific mode of the device + * @bandtable_index: Index of RF band + * @antennatable_index: Index of antenna + * @sartable_index: Index of SAR + */ +struct wwan_device_mode_info { + int device_mode; + int bandtable_index; + int antennatable_index; + int sartable_index; +}; + +/** + * Structure wwan_device_mode_configuration - device configuration + * Holds the data that is configured and obtained on probe event. + * The data is updated from the BIOS sensor information. + * @version: Mode configuration version + * @total_dev_mode: Total number of device modes + * @device_mode_info: pointer to structure wwan_device_mode_info + */ +struct wwan_device_mode_configuration { + int version; + int total_dev_mode; + struct wwan_device_mode_info *device_mode_info; +}; + +/** + * Structure wwan_supported_info - userspace datastore + * Holds the data that is obtained from userspace + * The data is updated from the userspace and send value back in the + * structure format that is mentioned here. + * @reg_mode_needed: regulatory mode set by user for tests + * @bios_table_revision: Version of SAR table + * @num_supported_modes: Total supported modes based on reg_mode + */ +struct wwan_supported_info { + int reg_mode_needed; + int bios_table_revision; + int num_supported_modes; +}; + +/** + * Structure wwan_sar_context - context of SAR + * Holds the complete context as long as the driver is in existence + * The context holds instance of the data used for different cases. + * @guid: Group id + * @handle: store acpi handle + * @reg_value: regulatory value + * Regulatory 0: FCC, 1: CE, 2: ISED + * @sar_device: platform_device type + * @sar_kobject: kobject for sysfs + * @supported_data: wwan_supported_info struct + * @sar_data: wwan_device_mode_info struct + * @config_data: wwan_device_mode_configuration array struct + */ +struct wwan_sar_context { + guid_t guid; + acpi_handle handle; + int reg_value; + struct platform_device *sar_device; + struct wwan_supported_info supported_data; + struct wwan_device_mode_info sar_data; + struct wwan_device_mode_configuration config_data[MAX_REGULATORY]; +}; +#endif /* INTEL_SAR_H */ diff --git a/drivers/platform/x86/intel/int3472/Kconfig b/drivers/platform/x86/intel/int3472/Kconfig new file mode 100644 index 000000000..62e5d4cf9 --- /dev/null +++ b/drivers/platform/x86/intel/int3472/Kconfig @@ -0,0 +1,30 @@ +config INTEL_SKL_INT3472 + tristate "Intel SkyLake ACPI INT3472 Driver" + depends on ACPI + depends on COMMON_CLK + depends on I2C + depends on GPIOLIB + depends on REGULATOR + select MFD_CORE + select REGMAP_I2C + help + This driver adds power controller support for the Intel SkyCam + devices found on the Intel SkyLake platforms. + + The INT3472 is a camera power controller, a logical device found on + Intel Skylake-based systems that can map to different hardware + devices depending on the platform. On machines designed for Chrome OS + it maps to a TPS68470 camera PMIC. On machines designed for Windows, + it maps to either a TP68470 camera PMIC, a uP6641Q sensor PMIC, or a + set of discrete GPIOs and power gates. + + If your device was designed for Chrome OS, this driver will provide + an ACPI OpRegion, which must be available before any of the devices + using it are probed. For this reason, you should select Y if your + device was designed for ChromeOS. For the same reason the + I2C_DESIGNWARE_PLATFORM option must be set to Y too. + + Say Y or M here if you have a SkyLake device designed for use + with Windows or ChromeOS. Say N here if you are not sure. + + The module will be named "intel-skl-int3472". diff --git a/drivers/platform/x86/intel/int3472/Makefile b/drivers/platform/x86/intel/int3472/Makefile new file mode 100644 index 000000000..cfec7784c --- /dev/null +++ b/drivers/platform/x86/intel/int3472/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_INTEL_SKL_INT3472) += intel_skl_int3472_discrete.o \ + intel_skl_int3472_tps68470.o +intel_skl_int3472_discrete-y := discrete.o clk_and_regulator.o common.o +intel_skl_int3472_tps68470-y := tps68470.o tps68470_board_data.o common.o diff --git a/drivers/platform/x86/intel/int3472/clk_and_regulator.c b/drivers/platform/x86/intel/int3472/clk_and_regulator.c new file mode 100644 index 000000000..74dc2cff7 --- /dev/null +++ b/drivers/platform/x86/intel/int3472/clk_and_regulator.c @@ -0,0 +1,211 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Author: Dan Scally <djrscally@gmail.com> */ + +#include <linux/acpi.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/regulator/driver.h> +#include <linux/slab.h> + +#include "common.h" + +/* + * The regulators have to have .ops to be valid, but the only ops we actually + * support are .enable and .disable which are handled via .ena_gpiod. Pass an + * empty struct to clear the check without lying about capabilities. + */ +static const struct regulator_ops int3472_gpio_regulator_ops; + +static int skl_int3472_clk_prepare(struct clk_hw *hw) +{ + struct int3472_gpio_clock *clk = to_int3472_clk(hw); + + gpiod_set_value_cansleep(clk->ena_gpio, 1); + gpiod_set_value_cansleep(clk->led_gpio, 1); + + return 0; +} + +static void skl_int3472_clk_unprepare(struct clk_hw *hw) +{ + struct int3472_gpio_clock *clk = to_int3472_clk(hw); + + gpiod_set_value_cansleep(clk->ena_gpio, 0); + gpiod_set_value_cansleep(clk->led_gpio, 0); +} + +static int skl_int3472_clk_enable(struct clk_hw *hw) +{ + /* + * We're just turning a GPIO on to enable the clock, which operation + * has the potential to sleep. Given .enable() cannot sleep, but + * .prepare() can, we toggle the GPIO in .prepare() instead. Thus, + * nothing to do here. + */ + return 0; +} + +static void skl_int3472_clk_disable(struct clk_hw *hw) +{ + /* Likewise, nothing to do here... */ +} + +static unsigned int skl_int3472_get_clk_frequency(struct int3472_discrete_device *int3472) +{ + union acpi_object *obj; + unsigned int freq; + + obj = skl_int3472_get_acpi_buffer(int3472->sensor, "SSDB"); + if (IS_ERR(obj)) + return 0; /* report rate as 0 on error */ + + if (obj->buffer.length < CIO2_SENSOR_SSDB_MCLKSPEED_OFFSET + sizeof(u32)) { + dev_err(int3472->dev, "The buffer is too small\n"); + kfree(obj); + return 0; + } + + freq = *(u32 *)(obj->buffer.pointer + CIO2_SENSOR_SSDB_MCLKSPEED_OFFSET); + + kfree(obj); + return freq; +} + +static unsigned long skl_int3472_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct int3472_gpio_clock *clk = to_int3472_clk(hw); + + return clk->frequency; +} + +static const struct clk_ops skl_int3472_clock_ops = { + .prepare = skl_int3472_clk_prepare, + .unprepare = skl_int3472_clk_unprepare, + .enable = skl_int3472_clk_enable, + .disable = skl_int3472_clk_disable, + .recalc_rate = skl_int3472_clk_recalc_rate, +}; + +int skl_int3472_register_clock(struct int3472_discrete_device *int3472) +{ + struct clk_init_data init = { + .ops = &skl_int3472_clock_ops, + .flags = CLK_GET_RATE_NOCACHE, + }; + int ret; + + init.name = kasprintf(GFP_KERNEL, "%s-clk", + acpi_dev_name(int3472->adev)); + if (!init.name) + return -ENOMEM; + + int3472->clock.frequency = skl_int3472_get_clk_frequency(int3472); + + int3472->clock.clk_hw.init = &init; + int3472->clock.clk = clk_register(&int3472->adev->dev, + &int3472->clock.clk_hw); + if (IS_ERR(int3472->clock.clk)) { + ret = PTR_ERR(int3472->clock.clk); + goto out_free_init_name; + } + + int3472->clock.cl = clkdev_create(int3472->clock.clk, NULL, + int3472->sensor_name); + if (!int3472->clock.cl) { + ret = -ENOMEM; + goto err_unregister_clk; + } + + kfree(init.name); + return 0; + +err_unregister_clk: + clk_unregister(int3472->clock.clk); +out_free_init_name: + kfree(init.name); + + return ret; +} + +void skl_int3472_unregister_clock(struct int3472_discrete_device *int3472) +{ + clkdev_drop(int3472->clock.cl); + clk_unregister(int3472->clock.clk); +} + +int skl_int3472_register_regulator(struct int3472_discrete_device *int3472, + struct acpi_resource_gpio *agpio) +{ + const struct int3472_sensor_config *sensor_config; + char *path = agpio->resource_source.string_ptr; + struct regulator_consumer_supply supply_map; + struct regulator_init_data init_data = { }; + struct regulator_config cfg = { }; + int ret; + + sensor_config = int3472->sensor_config; + if (IS_ERR(sensor_config)) { + dev_err(int3472->dev, "No sensor module config\n"); + return PTR_ERR(sensor_config); + } + + if (!sensor_config->supply_map.supply) { + dev_err(int3472->dev, "No supply name defined\n"); + return -ENODEV; + } + + init_data.constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS; + init_data.num_consumer_supplies = 1; + supply_map = sensor_config->supply_map; + supply_map.dev_name = int3472->sensor_name; + init_data.consumer_supplies = &supply_map; + + snprintf(int3472->regulator.regulator_name, + sizeof(int3472->regulator.regulator_name), "%s-regulator", + acpi_dev_name(int3472->adev)); + snprintf(int3472->regulator.supply_name, + GPIO_REGULATOR_SUPPLY_NAME_LENGTH, "supply-0"); + + int3472->regulator.rdesc = INT3472_REGULATOR( + int3472->regulator.regulator_name, + int3472->regulator.supply_name, + &int3472_gpio_regulator_ops); + + int3472->regulator.gpio = acpi_get_and_request_gpiod(path, agpio->pin_table[0], + "int3472,regulator"); + if (IS_ERR(int3472->regulator.gpio)) { + dev_err(int3472->dev, "Failed to get regulator GPIO line\n"); + return PTR_ERR(int3472->regulator.gpio); + } + + /* Ensure the pin is in output mode and non-active state */ + gpiod_direction_output(int3472->regulator.gpio, 0); + + cfg.dev = &int3472->adev->dev; + cfg.init_data = &init_data; + cfg.ena_gpiod = int3472->regulator.gpio; + + int3472->regulator.rdev = regulator_register(int3472->dev, + &int3472->regulator.rdesc, + &cfg); + if (IS_ERR(int3472->regulator.rdev)) { + ret = PTR_ERR(int3472->regulator.rdev); + goto err_free_gpio; + } + + return 0; + +err_free_gpio: + gpiod_put(int3472->regulator.gpio); + + return ret; +} + +void skl_int3472_unregister_regulator(struct int3472_discrete_device *int3472) +{ + regulator_unregister(int3472->regulator.rdev); + gpiod_put(int3472->regulator.gpio); +} diff --git a/drivers/platform/x86/intel/int3472/common.c b/drivers/platform/x86/intel/int3472/common.c new file mode 100644 index 000000000..9db2bb0bb --- /dev/null +++ b/drivers/platform/x86/intel/int3472/common.c @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Author: Dan Scally <djrscally@gmail.com> */ + +#include <linux/acpi.h> +#include <linux/slab.h> + +#include "common.h" + +union acpi_object *skl_int3472_get_acpi_buffer(struct acpi_device *adev, char *id) +{ + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + acpi_handle handle = adev->handle; + union acpi_object *obj; + acpi_status status; + + status = acpi_evaluate_object(handle, id, NULL, &buffer); + if (ACPI_FAILURE(status)) + return ERR_PTR(-ENODEV); + + obj = buffer.pointer; + if (!obj) + return ERR_PTR(-ENODEV); + + if (obj->type != ACPI_TYPE_BUFFER) { + acpi_handle_err(handle, "%s object is not an ACPI buffer\n", id); + kfree(obj); + return ERR_PTR(-EINVAL); + } + + return obj; +} + +int skl_int3472_fill_cldb(struct acpi_device *adev, struct int3472_cldb *cldb) +{ + union acpi_object *obj; + int ret; + + obj = skl_int3472_get_acpi_buffer(adev, "CLDB"); + if (IS_ERR(obj)) + return PTR_ERR(obj); + + if (obj->buffer.length > sizeof(*cldb)) { + acpi_handle_err(adev->handle, "The CLDB buffer is too large\n"); + ret = -EINVAL; + goto out_free_obj; + } + + memcpy(cldb, obj->buffer.pointer, obj->buffer.length); + ret = 0; + +out_free_obj: + kfree(obj); + return ret; +} + +/* sensor_adev_ret may be NULL, name_ret must not be NULL */ +int skl_int3472_get_sensor_adev_and_name(struct device *dev, + struct acpi_device **sensor_adev_ret, + const char **name_ret) +{ + struct acpi_device *adev = ACPI_COMPANION(dev); + struct acpi_device *sensor; + int ret = 0; + + sensor = acpi_dev_get_next_consumer_dev(adev, NULL); + if (!sensor) { + dev_err(dev, "INT3472 seems to have no dependents.\n"); + return -ENODEV; + } + + *name_ret = devm_kasprintf(dev, GFP_KERNEL, I2C_DEV_NAME_FORMAT, + acpi_dev_name(sensor)); + if (!*name_ret) + ret = -ENOMEM; + + if (ret == 0 && sensor_adev_ret) + *sensor_adev_ret = sensor; + else + acpi_dev_put(sensor); + + return ret; +} diff --git a/drivers/platform/x86/intel/int3472/common.h b/drivers/platform/x86/intel/int3472/common.h new file mode 100644 index 000000000..53270d19c --- /dev/null +++ b/drivers/platform/x86/intel/int3472/common.h @@ -0,0 +1,122 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Author: Dan Scally <djrscally@gmail.com> */ + +#ifndef _INTEL_SKL_INT3472_H +#define _INTEL_SKL_INT3472_H + +#include <linux/clk-provider.h> +#include <linux/gpio/machine.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/types.h> + +/* FIXME drop this once the I2C_DEV_NAME_FORMAT macro has been added to include/linux/i2c.h */ +#ifndef I2C_DEV_NAME_FORMAT +#define I2C_DEV_NAME_FORMAT "i2c-%s" +#endif + +/* PMIC GPIO Types */ +#define INT3472_GPIO_TYPE_RESET 0x00 +#define INT3472_GPIO_TYPE_POWERDOWN 0x01 +#define INT3472_GPIO_TYPE_POWER_ENABLE 0x0b +#define INT3472_GPIO_TYPE_CLK_ENABLE 0x0c +#define INT3472_GPIO_TYPE_PRIVACY_LED 0x0d + +#define INT3472_PDEV_MAX_NAME_LEN 23 +#define INT3472_MAX_SENSOR_GPIOS 3 + +#define GPIO_REGULATOR_NAME_LENGTH 21 +#define GPIO_REGULATOR_SUPPLY_NAME_LENGTH 9 + +#define CIO2_SENSOR_SSDB_MCLKSPEED_OFFSET 86 + +#define INT3472_REGULATOR(_name, _supply, _ops) \ + (const struct regulator_desc) { \ + .name = _name, \ + .supply_name = _supply, \ + .type = REGULATOR_VOLTAGE, \ + .ops = _ops, \ + .owner = THIS_MODULE, \ + } + +#define to_int3472_clk(hw) \ + container_of(hw, struct int3472_gpio_clock, clk_hw) + +#define to_int3472_device(clk) \ + container_of(clk, struct int3472_discrete_device, clock) + +struct acpi_device; +struct i2c_client; +struct platform_device; + +struct int3472_cldb { + u8 version; + /* + * control logic type + * 0: UNKNOWN + * 1: DISCRETE(CRD-D) + * 2: PMIC TPS68470 + * 3: PMIC uP6641 + */ + u8 control_logic_type; + u8 control_logic_id; + u8 sensor_card_sku; + u8 reserved[28]; +}; + +struct int3472_gpio_function_remap { + const char *documented; + const char *actual; +}; + +struct int3472_sensor_config { + const char *sensor_module_name; + struct regulator_consumer_supply supply_map; + const struct int3472_gpio_function_remap *function_maps; +}; + +struct int3472_discrete_device { + struct acpi_device *adev; + struct device *dev; + struct acpi_device *sensor; + const char *sensor_name; + + const struct int3472_sensor_config *sensor_config; + + struct int3472_gpio_regulator { + char regulator_name[GPIO_REGULATOR_NAME_LENGTH]; + char supply_name[GPIO_REGULATOR_SUPPLY_NAME_LENGTH]; + struct gpio_desc *gpio; + struct regulator_dev *rdev; + struct regulator_desc rdesc; + } regulator; + + struct int3472_gpio_clock { + struct clk *clk; + struct clk_hw clk_hw; + struct clk_lookup *cl; + struct gpio_desc *ena_gpio; + struct gpio_desc *led_gpio; + u32 frequency; + } clock; + + unsigned int ngpios; /* how many GPIOs have we seen */ + unsigned int n_sensor_gpios; /* how many have we mapped to sensor */ + struct gpiod_lookup_table gpios; +}; + +union acpi_object *skl_int3472_get_acpi_buffer(struct acpi_device *adev, + char *id); +int skl_int3472_fill_cldb(struct acpi_device *adev, struct int3472_cldb *cldb); +int skl_int3472_get_sensor_adev_and_name(struct device *dev, + struct acpi_device **sensor_adev_ret, + const char **name_ret); + +int skl_int3472_register_clock(struct int3472_discrete_device *int3472); +void skl_int3472_unregister_clock(struct int3472_discrete_device *int3472); + +int skl_int3472_register_regulator(struct int3472_discrete_device *int3472, + struct acpi_resource_gpio *agpio); +void skl_int3472_unregister_regulator(struct int3472_discrete_device *int3472); + +#endif diff --git a/drivers/platform/x86/intel/int3472/discrete.c b/drivers/platform/x86/intel/int3472/discrete.c new file mode 100644 index 000000000..c42c3faa2 --- /dev/null +++ b/drivers/platform/x86/intel/int3472/discrete.c @@ -0,0 +1,423 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Author: Dan Scally <djrscally@gmail.com> */ + +#include <linux/acpi.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio/machine.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/overflow.h> +#include <linux/platform_device.h> +#include <linux/uuid.h> + +#include "common.h" + +/* + * 79234640-9e10-4fea-a5c1-b5aa8b19756f + * This _DSM GUID returns information about the GPIO lines mapped to a + * discrete INT3472 device. Function number 1 returns a count of the GPIO + * lines that are mapped. Subsequent functions return 32 bit ints encoding + * information about the GPIO line, including its purpose. + */ +static const guid_t int3472_gpio_guid = + GUID_INIT(0x79234640, 0x9e10, 0x4fea, + 0xa5, 0xc1, 0xb5, 0xaa, 0x8b, 0x19, 0x75, 0x6f); + +/* + * 822ace8f-2814-4174-a56b-5f029fe079ee + * This _DSM GUID returns a string from the sensor device, which acts as a + * module identifier. + */ +static const guid_t cio2_sensor_module_guid = + GUID_INIT(0x822ace8f, 0x2814, 0x4174, + 0xa5, 0x6b, 0x5f, 0x02, 0x9f, 0xe0, 0x79, 0xee); + +/* + * Here follows platform specific mapping information that we can pass to + * the functions mapping resources to the sensors. Where the sensors have + * a power enable pin defined in DSDT we need to provide a supply name so + * the sensor drivers can find the regulator. The device name will be derived + * from the sensor's ACPI device within the code. Optionally, we can provide a + * NULL terminated array of function name mappings to deal with any platform + * specific deviations from the documented behaviour of GPIOs. + * + * Map a GPIO function name to NULL to prevent the driver from mapping that + * GPIO at all. + */ + +static const struct int3472_gpio_function_remap ov2680_gpio_function_remaps[] = { + { "reset", NULL }, + { "powerdown", "reset" }, + { } +}; + +static const struct int3472_sensor_config int3472_sensor_configs[] = { + /* Lenovo Miix 510-12ISK - OV2680, Front */ + { "GNDF140809R", { 0 }, ov2680_gpio_function_remaps }, + /* Lenovo Miix 510-12ISK - OV5648, Rear */ + { "GEFF150023R", REGULATOR_SUPPLY("avdd", NULL), NULL }, + /* Surface Go 1&2 - OV5693, Front */ + { "YHCU", REGULATOR_SUPPLY("avdd", NULL), NULL }, +}; + +static const struct int3472_sensor_config * +skl_int3472_get_sensor_module_config(struct int3472_discrete_device *int3472) +{ + union acpi_object *obj; + unsigned int i; + + obj = acpi_evaluate_dsm_typed(int3472->sensor->handle, + &cio2_sensor_module_guid, 0x00, + 0x01, NULL, ACPI_TYPE_STRING); + + if (!obj) { + dev_err(int3472->dev, + "Failed to get sensor module string from _DSM\n"); + return ERR_PTR(-ENODEV); + } + + if (obj->string.type != ACPI_TYPE_STRING) { + dev_err(int3472->dev, + "Sensor _DSM returned a non-string value\n"); + + ACPI_FREE(obj); + return ERR_PTR(-EINVAL); + } + + for (i = 0; i < ARRAY_SIZE(int3472_sensor_configs); i++) { + if (!strcmp(int3472_sensor_configs[i].sensor_module_name, + obj->string.pointer)) + break; + } + + ACPI_FREE(obj); + + if (i >= ARRAY_SIZE(int3472_sensor_configs)) + return ERR_PTR(-EINVAL); + + return &int3472_sensor_configs[i]; +} + +static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int3472, + struct acpi_resource_gpio *agpio, + const char *func, u32 polarity) +{ + const struct int3472_sensor_config *sensor_config; + char *path = agpio->resource_source.string_ptr; + struct gpiod_lookup *table_entry; + struct acpi_device *adev; + acpi_handle handle; + acpi_status status; + + if (int3472->n_sensor_gpios >= INT3472_MAX_SENSOR_GPIOS) { + dev_warn(int3472->dev, "Too many GPIOs mapped\n"); + return -EINVAL; + } + + sensor_config = int3472->sensor_config; + if (!IS_ERR(sensor_config) && sensor_config->function_maps) { + const struct int3472_gpio_function_remap *remap; + + for (remap = sensor_config->function_maps; remap->documented; remap++) { + if (!strcmp(func, remap->documented)) { + func = remap->actual; + break; + } + } + } + + /* Functions mapped to NULL should not be mapped to the sensor */ + if (!func) + return 0; + + status = acpi_get_handle(NULL, path, &handle); + if (ACPI_FAILURE(status)) + return -EINVAL; + + adev = acpi_fetch_acpi_dev(handle); + if (!adev) + return -ENODEV; + + table_entry = &int3472->gpios.table[int3472->n_sensor_gpios]; + table_entry->key = acpi_dev_name(adev); + table_entry->chip_hwnum = agpio->pin_table[0]; + table_entry->con_id = func; + table_entry->idx = 0; + table_entry->flags = polarity; + + int3472->n_sensor_gpios++; + + return 0; +} + +static int skl_int3472_map_gpio_to_clk(struct int3472_discrete_device *int3472, + struct acpi_resource_gpio *agpio, u8 type) +{ + char *path = agpio->resource_source.string_ptr; + u16 pin = agpio->pin_table[0]; + struct gpio_desc *gpio; + + switch (type) { + case INT3472_GPIO_TYPE_CLK_ENABLE: + gpio = acpi_get_and_request_gpiod(path, pin, "int3472,clk-enable"); + if (IS_ERR(gpio)) + return (PTR_ERR(gpio)); + + int3472->clock.ena_gpio = gpio; + /* Ensure the pin is in output mode and non-active state */ + gpiod_direction_output(int3472->clock.ena_gpio, 0); + break; + case INT3472_GPIO_TYPE_PRIVACY_LED: + gpio = acpi_get_and_request_gpiod(path, pin, "int3472,privacy-led"); + if (IS_ERR(gpio)) + return (PTR_ERR(gpio)); + + int3472->clock.led_gpio = gpio; + /* Ensure the pin is in output mode and non-active state */ + gpiod_direction_output(int3472->clock.led_gpio, 0); + break; + default: + dev_err(int3472->dev, "Invalid GPIO type 0x%02x for clock\n", type); + break; + } + + return 0; +} + +/** + * skl_int3472_handle_gpio_resources: Map PMIC resources to consuming sensor + * @ares: A pointer to a &struct acpi_resource + * @data: A pointer to a &struct int3472_discrete_device + * + * This function handles GPIO resources that are against an INT3472 + * ACPI device, by checking the value of the corresponding _DSM entry. + * This will return a 32bit int, where the lowest byte represents the + * function of the GPIO pin: + * + * 0x00 Reset + * 0x01 Power down + * 0x0b Power enable + * 0x0c Clock enable + * 0x0d Privacy LED + * + * There are some known platform specific quirks where that does not quite + * hold up; for example where a pin with type 0x01 (Power down) is mapped to + * a sensor pin that performs a reset function or entries in _CRS and _DSM that + * do not actually correspond to a physical connection. These will be handled + * by the mapping sub-functions. + * + * GPIOs will either be mapped directly to the sensor device or else used + * to create clocks and regulators via the usual frameworks. + * + * Return: + * * 1 - To continue the loop + * * 0 - When all resources found are handled properly. + * * -EINVAL - If the resource is not a GPIO IO resource + * * -ENODEV - If the resource has no corresponding _DSM entry + * * -Other - Errors propagated from one of the sub-functions. + */ +static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, + void *data) +{ + struct int3472_discrete_device *int3472 = data; + struct acpi_resource_gpio *agpio; + union acpi_object *obj; + const char *err_msg; + int ret; + u8 type; + + if (!acpi_gpio_get_io_resource(ares, &agpio)) + return 1; + + /* + * ngpios + 2 because the index of this _DSM function is 1-based and + * the first function is just a count. + */ + obj = acpi_evaluate_dsm_typed(int3472->adev->handle, + &int3472_gpio_guid, 0x00, + int3472->ngpios + 2, + NULL, ACPI_TYPE_INTEGER); + + if (!obj) { + dev_warn(int3472->dev, "No _DSM entry for GPIO pin %u\n", + agpio->pin_table[0]); + return 1; + } + + type = obj->integer.value & 0xff; + + switch (type) { + case INT3472_GPIO_TYPE_RESET: + ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, "reset", + GPIO_ACTIVE_LOW); + if (ret) + err_msg = "Failed to map reset pin to sensor\n"; + + break; + case INT3472_GPIO_TYPE_POWERDOWN: + ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, "powerdown", + GPIO_ACTIVE_LOW); + if (ret) + err_msg = "Failed to map powerdown pin to sensor\n"; + + break; + case INT3472_GPIO_TYPE_CLK_ENABLE: + case INT3472_GPIO_TYPE_PRIVACY_LED: + ret = skl_int3472_map_gpio_to_clk(int3472, agpio, type); + if (ret) + err_msg = "Failed to map GPIO to clock\n"; + + break; + case INT3472_GPIO_TYPE_POWER_ENABLE: + ret = skl_int3472_register_regulator(int3472, agpio); + if (ret) + err_msg = "Failed to map regulator to sensor\n"; + + break; + default: + dev_warn(int3472->dev, + "GPIO type 0x%02x unknown; the sensor may not work\n", + type); + ret = 1; + break; + } + + int3472->ngpios++; + ACPI_FREE(obj); + + if (ret < 0) + return dev_err_probe(int3472->dev, ret, err_msg); + + return ret; +} + +static int skl_int3472_parse_crs(struct int3472_discrete_device *int3472) +{ + LIST_HEAD(resource_list); + int ret; + + /* + * No error check, because not having a sensor config is not necessarily + * a failure mode. + */ + int3472->sensor_config = skl_int3472_get_sensor_module_config(int3472); + + ret = acpi_dev_get_resources(int3472->adev, &resource_list, + skl_int3472_handle_gpio_resources, + int3472); + if (ret < 0) + return ret; + + acpi_dev_free_resource_list(&resource_list); + + /* + * If we find no clock enable GPIO pin then the privacy LED won't work. + * We've never seen that situation, but it's possible. Warn the user so + * it's clear what's happened. + */ + if (int3472->clock.ena_gpio) { + ret = skl_int3472_register_clock(int3472); + if (ret) + return ret; + } else { + if (int3472->clock.led_gpio) + dev_warn(int3472->dev, + "No clk GPIO. The privacy LED won't work\n"); + } + + int3472->gpios.dev_id = int3472->sensor_name; + gpiod_add_lookup_table(&int3472->gpios); + + return 0; +} + +static int skl_int3472_discrete_remove(struct platform_device *pdev) +{ + struct int3472_discrete_device *int3472 = platform_get_drvdata(pdev); + + gpiod_remove_lookup_table(&int3472->gpios); + + if (int3472->clock.cl) + skl_int3472_unregister_clock(int3472); + + gpiod_put(int3472->clock.ena_gpio); + gpiod_put(int3472->clock.led_gpio); + + skl_int3472_unregister_regulator(int3472); + + return 0; +} + +static int skl_int3472_discrete_probe(struct platform_device *pdev) +{ + struct acpi_device *adev = ACPI_COMPANION(&pdev->dev); + struct int3472_discrete_device *int3472; + struct int3472_cldb cldb; + int ret; + + ret = skl_int3472_fill_cldb(adev, &cldb); + if (ret) { + dev_err(&pdev->dev, "Couldn't fill CLDB structure\n"); + return ret; + } + + if (cldb.control_logic_type != 1) { + dev_err(&pdev->dev, "Unsupported control logic type %u\n", + cldb.control_logic_type); + return -EINVAL; + } + + /* Max num GPIOs we've seen plus a terminator */ + int3472 = devm_kzalloc(&pdev->dev, struct_size(int3472, gpios.table, + INT3472_MAX_SENSOR_GPIOS + 1), GFP_KERNEL); + if (!int3472) + return -ENOMEM; + + int3472->adev = adev; + int3472->dev = &pdev->dev; + platform_set_drvdata(pdev, int3472); + + ret = skl_int3472_get_sensor_adev_and_name(&pdev->dev, &int3472->sensor, + &int3472->sensor_name); + if (ret) + return ret; + + /* + * Initialising this list means we can call gpiod_remove_lookup_table() + * in failure paths without issue. + */ + INIT_LIST_HEAD(&int3472->gpios.list); + + ret = skl_int3472_parse_crs(int3472); + if (ret) { + skl_int3472_discrete_remove(pdev); + return ret; + } + + acpi_dev_clear_dependencies(adev); + return 0; +} + +static const struct acpi_device_id int3472_device_id[] = { + { "INT3472", 0 }, + { } +}; +MODULE_DEVICE_TABLE(acpi, int3472_device_id); + +static struct platform_driver int3472_discrete = { + .driver = { + .name = "int3472-discrete", + .acpi_match_table = int3472_device_id, + }, + .probe = skl_int3472_discrete_probe, + .remove = skl_int3472_discrete_remove, +}; +module_platform_driver(int3472_discrete); + +MODULE_DESCRIPTION("Intel SkyLake INT3472 ACPI Discrete Device Driver"); +MODULE_AUTHOR("Daniel Scally <djrscally@gmail.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/platform/x86/intel/int3472/tps68470.c b/drivers/platform/x86/intel/int3472/tps68470.c new file mode 100644 index 000000000..5b8d1a962 --- /dev/null +++ b/drivers/platform/x86/intel/int3472/tps68470.c @@ -0,0 +1,261 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Author: Dan Scally <djrscally@gmail.com> */ + +#include <linux/acpi.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/mfd/core.h> +#include <linux/mfd/tps68470.h> +#include <linux/platform_device.h> +#include <linux/platform_data/tps68470.h> +#include <linux/regmap.h> +#include <linux/string.h> + +#include "common.h" +#include "tps68470.h" + +#define DESIGNED_FOR_CHROMEOS 1 +#define DESIGNED_FOR_WINDOWS 2 + +#define TPS68470_WIN_MFD_CELL_COUNT 3 + +static const struct mfd_cell tps68470_cros[] = { + { .name = "tps68470-gpio" }, + { .name = "tps68470_pmic_opregion" }, +}; + +static const struct regmap_config tps68470_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = TPS68470_REG_MAX, +}; + +static int tps68470_chip_init(struct device *dev, struct regmap *regmap) +{ + unsigned int version; + int ret; + + /* Force software reset */ + ret = regmap_write(regmap, TPS68470_REG_RESET, TPS68470_REG_RESET_MASK); + if (ret) + return ret; + + ret = regmap_read(regmap, TPS68470_REG_REVID, &version); + if (ret) { + dev_err(dev, "Failed to read revision register: %d\n", ret); + return ret; + } + + dev_info(dev, "TPS68470 REVID: 0x%02x\n", version); + + return 0; +} + +/** skl_int3472_tps68470_calc_type: Check what platform a device is designed for + * @adev: A pointer to a &struct acpi_device + * + * Check CLDB buffer against the PMIC's adev. If present, then we check + * the value of control_logic_type field and follow one of the + * following scenarios: + * + * 1. No CLDB - likely ACPI tables designed for ChromeOS. We + * create platform devices for the GPIOs and OpRegion drivers. + * + * 2. CLDB, with control_logic_type = 2 - probably ACPI tables + * made for Windows 2-in-1 platforms. Register pdevs for GPIO, + * Clock and Regulator drivers to bind to. + * + * 3. Any other value in control_logic_type, we should never have + * gotten to this point; fail probe and return. + * + * Return: + * * 1 Device intended for ChromeOS + * * 2 Device intended for Windows + * * -EINVAL Where @adev has an object named CLDB but it does not conform to + * our expectations + */ +static int skl_int3472_tps68470_calc_type(struct acpi_device *adev) +{ + struct int3472_cldb cldb = { 0 }; + int ret; + + /* + * A CLDB buffer that exists, but which does not match our expectations + * should trigger an error so we don't blindly continue. + */ + ret = skl_int3472_fill_cldb(adev, &cldb); + if (ret && ret != -ENODEV) + return ret; + + if (ret) + return DESIGNED_FOR_CHROMEOS; + + if (cldb.control_logic_type != 2) + return -EINVAL; + + return DESIGNED_FOR_WINDOWS; +} + +/* + * Return the size of the flexible array member, because we'll need that later + * on to pass .pdata_size to cells. + */ +static int +skl_int3472_fill_clk_pdata(struct device *dev, struct tps68470_clk_platform_data **clk_pdata) +{ + struct acpi_device *adev = ACPI_COMPANION(dev); + struct acpi_device *consumer; + unsigned int n_consumers = 0; + const char *sensor_name; + unsigned int i = 0; + + for_each_acpi_consumer_dev(adev, consumer) + n_consumers++; + + if (!n_consumers) { + dev_err(dev, "INT3472 seems to have no dependents\n"); + return -ENODEV; + } + + *clk_pdata = devm_kzalloc(dev, struct_size(*clk_pdata, consumers, n_consumers), + GFP_KERNEL); + if (!*clk_pdata) + return -ENOMEM; + + (*clk_pdata)->n_consumers = n_consumers; + i = 0; + + for_each_acpi_consumer_dev(adev, consumer) { + sensor_name = devm_kasprintf(dev, GFP_KERNEL, I2C_DEV_NAME_FORMAT, + acpi_dev_name(consumer)); + if (!sensor_name) { + acpi_dev_put(consumer); + return -ENOMEM; + } + + (*clk_pdata)->consumers[i].consumer_dev_name = sensor_name; + i++; + } + + return n_consumers; +} + +static int skl_int3472_tps68470_probe(struct i2c_client *client) +{ + struct acpi_device *adev = ACPI_COMPANION(&client->dev); + const struct int3472_tps68470_board_data *board_data; + struct tps68470_clk_platform_data *clk_pdata; + struct mfd_cell *cells; + struct regmap *regmap; + int n_consumers; + int device_type; + int ret; + int i; + + n_consumers = skl_int3472_fill_clk_pdata(&client->dev, &clk_pdata); + if (n_consumers < 0) + return n_consumers; + + regmap = devm_regmap_init_i2c(client, &tps68470_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "Failed to create regmap: %ld\n", PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + + i2c_set_clientdata(client, regmap); + + ret = tps68470_chip_init(&client->dev, regmap); + if (ret < 0) { + dev_err(&client->dev, "TPS68470 init error %d\n", ret); + return ret; + } + + device_type = skl_int3472_tps68470_calc_type(adev); + switch (device_type) { + case DESIGNED_FOR_WINDOWS: + board_data = int3472_tps68470_get_board_data(dev_name(&client->dev)); + if (!board_data) + return dev_err_probe(&client->dev, -ENODEV, "No board-data found for this model\n"); + + cells = kcalloc(TPS68470_WIN_MFD_CELL_COUNT, sizeof(*cells), GFP_KERNEL); + if (!cells) + return -ENOMEM; + + /* + * The order of the cells matters here! The clk must be first + * because the regulator depends on it. The gpios must be last, + * acpi_gpiochip_add() calls acpi_dev_clear_dependencies() and + * the clk + regulators must be ready when this happens. + */ + cells[0].name = "tps68470-clk"; + cells[0].platform_data = clk_pdata; + cells[0].pdata_size = struct_size(clk_pdata, consumers, n_consumers); + cells[1].name = "tps68470-regulator"; + cells[1].platform_data = (void *)board_data->tps68470_regulator_pdata; + cells[1].pdata_size = sizeof(struct tps68470_regulator_platform_data); + cells[2].name = "tps68470-gpio"; + + for (i = 0; i < board_data->n_gpiod_lookups; i++) + gpiod_add_lookup_table(board_data->tps68470_gpio_lookup_tables[i]); + + ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE, + cells, TPS68470_WIN_MFD_CELL_COUNT, + NULL, 0, NULL); + kfree(cells); + + if (ret) { + for (i = 0; i < board_data->n_gpiod_lookups; i++) + gpiod_remove_lookup_table(board_data->tps68470_gpio_lookup_tables[i]); + } + + break; + case DESIGNED_FOR_CHROMEOS: + ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE, + tps68470_cros, ARRAY_SIZE(tps68470_cros), + NULL, 0, NULL); + break; + default: + dev_err(&client->dev, "Failed to add MFD devices\n"); + return device_type; + } + + /* + * No acpi_dev_clear_dependencies() here, since the acpi_gpiochip_add() + * for the GPIO cell already does this. + */ + + return ret; +} + +static void skl_int3472_tps68470_remove(struct i2c_client *client) +{ + const struct int3472_tps68470_board_data *board_data; + int i; + + board_data = int3472_tps68470_get_board_data(dev_name(&client->dev)); + if (board_data) { + for (i = 0; i < board_data->n_gpiod_lookups; i++) + gpiod_remove_lookup_table(board_data->tps68470_gpio_lookup_tables[i]); + } +} + +static const struct acpi_device_id int3472_device_id[] = { + { "INT3472", 0 }, + { } +}; +MODULE_DEVICE_TABLE(acpi, int3472_device_id); + +static struct i2c_driver int3472_tps68470 = { + .driver = { + .name = "int3472-tps68470", + .acpi_match_table = int3472_device_id, + }, + .probe_new = skl_int3472_tps68470_probe, + .remove = skl_int3472_tps68470_remove, +}; +module_i2c_driver(int3472_tps68470); + +MODULE_DESCRIPTION("Intel SkyLake INT3472 ACPI TPS68470 Device Driver"); +MODULE_AUTHOR("Daniel Scally <djrscally@gmail.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_SOFTDEP("pre: clk-tps68470 tps68470-regulator"); diff --git a/drivers/platform/x86/intel/int3472/tps68470.h b/drivers/platform/x86/intel/int3472/tps68470.h new file mode 100644 index 000000000..35915e701 --- /dev/null +++ b/drivers/platform/x86/intel/int3472/tps68470.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * TI TPS68470 PMIC platform data definition. + * + * Copyright (c) 2021 Red Hat Inc. + * + * Red Hat authors: + * Hans de Goede <hdegoede@redhat.com> + */ + +#ifndef _INTEL_SKL_INT3472_TPS68470_H +#define _INTEL_SKL_INT3472_TPS68470_H + +struct gpiod_lookup_table; +struct tps68470_regulator_platform_data; + +struct int3472_tps68470_board_data { + const char *dev_name; + const struct tps68470_regulator_platform_data *tps68470_regulator_pdata; + unsigned int n_gpiod_lookups; + struct gpiod_lookup_table *tps68470_gpio_lookup_tables[]; +}; + +const struct int3472_tps68470_board_data *int3472_tps68470_get_board_data(const char *dev_name); + +#endif diff --git a/drivers/platform/x86/intel/int3472/tps68470_board_data.c b/drivers/platform/x86/intel/int3472/tps68470_board_data.c new file mode 100644 index 000000000..322237e05 --- /dev/null +++ b/drivers/platform/x86/intel/int3472/tps68470_board_data.c @@ -0,0 +1,208 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * TI TPS68470 PMIC platform data definition. + * + * Copyright (c) 2021 Dan Scally <djrscally@gmail.com> + * Copyright (c) 2021 Red Hat Inc. + * + * Red Hat authors: + * Hans de Goede <hdegoede@redhat.com> + */ + +#include <linux/dmi.h> +#include <linux/gpio/machine.h> +#include <linux/platform_data/tps68470.h> +#include <linux/regulator/machine.h> +#include "tps68470.h" + +static struct regulator_consumer_supply int347a_core_consumer_supplies[] = { + REGULATOR_SUPPLY("dvdd", "i2c-INT347A:00"), +}; + +static struct regulator_consumer_supply int347a_ana_consumer_supplies[] = { + REGULATOR_SUPPLY("avdd", "i2c-INT347A:00"), +}; + +static struct regulator_consumer_supply int347a_vcm_consumer_supplies[] = { + REGULATOR_SUPPLY("vdd", "i2c-INT347A:00-VCM"), +}; + +static struct regulator_consumer_supply int347a_vsio_consumer_supplies[] = { + REGULATOR_SUPPLY("dovdd", "i2c-INT347A:00"), + REGULATOR_SUPPLY("vsio", "i2c-INT347A:00-VCM"), + REGULATOR_SUPPLY("vddd", "i2c-INT347E:00"), +}; + +static struct regulator_consumer_supply int347a_aux1_consumer_supplies[] = { + REGULATOR_SUPPLY("vdda", "i2c-INT347E:00"), +}; + +static struct regulator_consumer_supply int347a_aux2_consumer_supplies[] = { + REGULATOR_SUPPLY("vdddo", "i2c-INT347E:00"), +}; + +static const struct regulator_init_data surface_go_tps68470_core_reg_init_data = { + .constraints = { + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = true, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(int347a_core_consumer_supplies), + .consumer_supplies = int347a_core_consumer_supplies, +}; + +static const struct regulator_init_data surface_go_tps68470_ana_reg_init_data = { + .constraints = { + .min_uV = 2815200, + .max_uV = 2815200, + .apply_uV = true, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(int347a_ana_consumer_supplies), + .consumer_supplies = int347a_ana_consumer_supplies, +}; + +static const struct regulator_init_data surface_go_tps68470_vcm_reg_init_data = { + .constraints = { + .min_uV = 2815200, + .max_uV = 2815200, + .apply_uV = true, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(int347a_vcm_consumer_supplies), + .consumer_supplies = int347a_vcm_consumer_supplies, +}; + +/* Ensure the always-on VIO regulator has the same voltage as VSIO */ +static const struct regulator_init_data surface_go_tps68470_vio_reg_init_data = { + .constraints = { + .min_uV = 1800600, + .max_uV = 1800600, + .apply_uV = true, + .always_on = true, + }, +}; + +static const struct regulator_init_data surface_go_tps68470_vsio_reg_init_data = { + .constraints = { + .min_uV = 1800600, + .max_uV = 1800600, + .apply_uV = true, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(int347a_vsio_consumer_supplies), + .consumer_supplies = int347a_vsio_consumer_supplies, +}; + +static const struct regulator_init_data surface_go_tps68470_aux1_reg_init_data = { + .constraints = { + .min_uV = 2815200, + .max_uV = 2815200, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(int347a_aux1_consumer_supplies), + .consumer_supplies = int347a_aux1_consumer_supplies, +}; + +static const struct regulator_init_data surface_go_tps68470_aux2_reg_init_data = { + .constraints = { + .min_uV = 1800600, + .max_uV = 1800600, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(int347a_aux2_consumer_supplies), + .consumer_supplies = int347a_aux2_consumer_supplies, +}; + +static const struct tps68470_regulator_platform_data surface_go_tps68470_pdata = { + .reg_init_data = { + [TPS68470_CORE] = &surface_go_tps68470_core_reg_init_data, + [TPS68470_ANA] = &surface_go_tps68470_ana_reg_init_data, + [TPS68470_VCM] = &surface_go_tps68470_vcm_reg_init_data, + [TPS68470_VIO] = &surface_go_tps68470_vio_reg_init_data, + [TPS68470_VSIO] = &surface_go_tps68470_vsio_reg_init_data, + [TPS68470_AUX1] = &surface_go_tps68470_aux1_reg_init_data, + [TPS68470_AUX2] = &surface_go_tps68470_aux2_reg_init_data, + }, +}; + +static struct gpiod_lookup_table surface_go_int347a_gpios = { + .dev_id = "i2c-INT347A:00", + .table = { + GPIO_LOOKUP("tps68470-gpio", 9, "reset", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("tps68470-gpio", 7, "powerdown", GPIO_ACTIVE_LOW), + { } + } +}; + +static struct gpiod_lookup_table surface_go_int347e_gpios = { + .dev_id = "i2c-INT347E:00", + .table = { + GPIO_LOOKUP("tps68470-gpio", 5, "enable", GPIO_ACTIVE_HIGH), + { } + } +}; + +static const struct int3472_tps68470_board_data surface_go_tps68470_board_data = { + .dev_name = "i2c-INT3472:05", + .tps68470_regulator_pdata = &surface_go_tps68470_pdata, + .n_gpiod_lookups = 2, + .tps68470_gpio_lookup_tables = { + &surface_go_int347a_gpios, + &surface_go_int347e_gpios, + }, +}; + +static const struct int3472_tps68470_board_data surface_go3_tps68470_board_data = { + .dev_name = "i2c-INT3472:01", + .tps68470_regulator_pdata = &surface_go_tps68470_pdata, + .n_gpiod_lookups = 2, + .tps68470_gpio_lookup_tables = { + &surface_go_int347a_gpios, + &surface_go_int347e_gpios, + }, +}; + +static const struct dmi_system_id int3472_tps68470_board_data_table[] = { + { + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Go"), + }, + .driver_data = (void *)&surface_go_tps68470_board_data, + }, + { + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Go 2"), + }, + .driver_data = (void *)&surface_go_tps68470_board_data, + }, + { + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Go 3"), + }, + .driver_data = (void *)&surface_go3_tps68470_board_data, + }, + { } +}; + +const struct int3472_tps68470_board_data *int3472_tps68470_get_board_data(const char *dev_name) +{ + const struct int3472_tps68470_board_data *board_data; + const struct dmi_system_id *match; + + for (match = dmi_first_match(int3472_tps68470_board_data_table); + match; + match = dmi_first_match(match + 1)) { + board_data = match->driver_data; + if (strcmp(board_data->dev_name, dev_name) == 0) + return board_data; + } + + return NULL; +} diff --git a/drivers/platform/x86/intel/ishtp_eclite.c b/drivers/platform/x86/intel/ishtp_eclite.c new file mode 100644 index 000000000..93ac8b2db --- /dev/null +++ b/drivers/platform/x86/intel/ishtp_eclite.c @@ -0,0 +1,703 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Intel ECLite opregion driver for talking to ECLite firmware running on + * Intel Integrated Sensor Hub (ISH) using ISH Transport Protocol (ISHTP) + * + * Copyright (c) 2021, Intel Corporation. + */ + +#include <linux/acpi.h> +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/intel-ish-client-if.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <linux/suspend.h> +#include <linux/types.h> +#include <linux/uuid.h> +#include <linux/uaccess.h> + +#define ECLITE_DATA_OPREGION_ID 0x9E +#define ECLITE_CMD_OPREGION_ID 0x9F + +#define ECL_MSG_DATA 0x1 +#define ECL_MSG_EVENT 0x2 + +#define ECL_ISH_READ 0x1 +#define ECL_ISH_WRITE 0x2 +#define ECL_ISH_HEADER_VERSION 0 + +#define ECL_CL_RX_RING_SIZE 16 +#define ECL_CL_TX_RING_SIZE 8 + +#define ECL_DATA_OPR_BUFLEN 384 +#define ECL_EVENTS_NOTIFY 333 + +#define cmd_opr_offsetof(element) offsetof(struct opregion_cmd, element) +#define cl_data_to_dev(opr_dev) ishtp_device((opr_dev)->cl_device) + +#ifndef BITS_TO_BYTES +#define BITS_TO_BYTES(x) ((x) / 8) +#endif + +struct opregion_cmd { + unsigned int command; + unsigned int offset; + unsigned int length; + unsigned int event_id; +}; + +struct opregion_data { + char data[ECL_DATA_OPR_BUFLEN]; +}; + +struct opregion_context { + struct opregion_cmd cmd_area; + struct opregion_data data_area; +}; + +struct ecl_message_header { + unsigned int version:2; + unsigned int data_type:2; + unsigned int request_type:2; + unsigned int offset:9; + unsigned int data_len:9; + unsigned int event:8; +}; + +struct ecl_message { + struct ecl_message_header header; + char payload[ECL_DATA_OPR_BUFLEN]; +}; + +struct ishtp_opregion_dev { + struct opregion_context opr_context; + struct ishtp_cl *ecl_ishtp_cl; + struct ishtp_cl_device *cl_device; + struct ishtp_fw_client *fw_client; + struct ishtp_cl_rb *rb; + struct acpi_device *adev; + unsigned int dsm_event_id; + unsigned int ish_link_ready; + unsigned int ish_read_done; + unsigned int acpi_init_done; + wait_queue_head_t read_wait; + struct work_struct event_work; + struct work_struct reset_work; + /* lock for opregion context */ + struct mutex lock; + +}; + +/* eclite ishtp client UUID: 6a19cc4b-d760-4de3-b14d-f25ebd0fbcd9 */ +static const struct ishtp_device_id ecl_ishtp_id_table[] = { + { .guid = GUID_INIT(0x6a19cc4b, 0xd760, 0x4de3, + 0xb1, 0x4d, 0xf2, 0x5e, 0xbd, 0xf, 0xbc, 0xd9), }, + { } +}; +MODULE_DEVICE_TABLE(ishtp, ecl_ishtp_id_table); + +/* ACPI DSM UUID: 91d936a7-1f01-49c6-a6b4-72f00ad8d8a5 */ +static const guid_t ecl_acpi_guid = + GUID_INIT(0x91d936a7, 0x1f01, 0x49c6, 0xa6, + 0xb4, 0x72, 0xf0, 0x0a, 0xd8, 0xd8, 0xa5); + +/** + * ecl_ish_cl_read() - Read data from eclite FW + * + * @opr_dev: pointer to opregion device + * + * This function issues a read request to eclite FW and waits until it + * receives a response. When response is received the read data is copied to + * opregion buffer. + */ +static int ecl_ish_cl_read(struct ishtp_opregion_dev *opr_dev) +{ + struct ecl_message_header header; + int len, rv; + + if (!opr_dev->ish_link_ready) + return -EIO; + + if ((opr_dev->opr_context.cmd_area.offset + + opr_dev->opr_context.cmd_area.length) > ECL_DATA_OPR_BUFLEN) { + return -EINVAL; + } + + header.version = ECL_ISH_HEADER_VERSION; + header.data_type = ECL_MSG_DATA; + header.request_type = ECL_ISH_READ; + header.offset = opr_dev->opr_context.cmd_area.offset; + header.data_len = opr_dev->opr_context.cmd_area.length; + header.event = opr_dev->opr_context.cmd_area.event_id; + len = sizeof(header); + + opr_dev->ish_read_done = false; + rv = ishtp_cl_send(opr_dev->ecl_ishtp_cl, (uint8_t *)&header, len); + if (rv) { + dev_err(cl_data_to_dev(opr_dev), "ish-read : send failed\n"); + return -EIO; + } + + dev_dbg(cl_data_to_dev(opr_dev), + "[ish_rd] Req: off : %x, len : %x\n", + header.offset, + header.data_len); + + rv = wait_event_interruptible_timeout(opr_dev->read_wait, + opr_dev->ish_read_done, + 2 * HZ); + if (!rv) { + dev_err(cl_data_to_dev(opr_dev), + "[ish_rd] No response from firmware\n"); + return -EIO; + } + + return 0; +} + +/** + * ecl_ish_cl_write() - This function writes data to eclite FW. + * + * @opr_dev: pointer to opregion device + * + * This function writes data to eclite FW. + */ +static int ecl_ish_cl_write(struct ishtp_opregion_dev *opr_dev) +{ + struct ecl_message message; + int len; + + if (!opr_dev->ish_link_ready) + return -EIO; + + if ((opr_dev->opr_context.cmd_area.offset + + opr_dev->opr_context.cmd_area.length) > ECL_DATA_OPR_BUFLEN) { + return -EINVAL; + } + + message.header.version = ECL_ISH_HEADER_VERSION; + message.header.data_type = ECL_MSG_DATA; + message.header.request_type = ECL_ISH_WRITE; + message.header.offset = opr_dev->opr_context.cmd_area.offset; + message.header.data_len = opr_dev->opr_context.cmd_area.length; + message.header.event = opr_dev->opr_context.cmd_area.event_id; + len = sizeof(struct ecl_message_header) + message.header.data_len; + + memcpy(message.payload, + opr_dev->opr_context.data_area.data + message.header.offset, + message.header.data_len); + + dev_dbg(cl_data_to_dev(opr_dev), + "[ish_wr] off : %x, len : %x\n", + message.header.offset, + message.header.data_len); + + return ishtp_cl_send(opr_dev->ecl_ishtp_cl, (uint8_t *)&message, len); +} + +static acpi_status +ecl_opregion_cmd_handler(u32 function, acpi_physical_address address, + u32 bits, u64 *value64, + void *handler_context, void *region_context) +{ + struct ishtp_opregion_dev *opr_dev; + struct opregion_cmd *cmd; + acpi_status status = AE_OK; + + if (!region_context || !value64) + return AE_BAD_PARAMETER; + + if (function == ACPI_READ) + return AE_ERROR; + + opr_dev = (struct ishtp_opregion_dev *)region_context; + + mutex_lock(&opr_dev->lock); + + cmd = &opr_dev->opr_context.cmd_area; + + switch (address) { + case cmd_opr_offsetof(command): + cmd->command = (u32)*value64; + + if (cmd->command == ECL_ISH_READ) + status = ecl_ish_cl_read(opr_dev); + else if (cmd->command == ECL_ISH_WRITE) + status = ecl_ish_cl_write(opr_dev); + else + status = AE_ERROR; + break; + case cmd_opr_offsetof(offset): + cmd->offset = (u32)*value64; + break; + case cmd_opr_offsetof(length): + cmd->length = (u32)*value64; + break; + case cmd_opr_offsetof(event_id): + cmd->event_id = (u32)*value64; + break; + default: + status = AE_ERROR; + } + + mutex_unlock(&opr_dev->lock); + + return status; +} + +static acpi_status +ecl_opregion_data_handler(u32 function, acpi_physical_address address, + u32 bits, u64 *value64, + void *handler_context, void *region_context) +{ + struct ishtp_opregion_dev *opr_dev; + unsigned int bytes = BITS_TO_BYTES(bits); + void *data_addr; + + if (!region_context || !value64) + return AE_BAD_PARAMETER; + + if (address + bytes > ECL_DATA_OPR_BUFLEN) + return AE_BAD_PARAMETER; + + opr_dev = (struct ishtp_opregion_dev *)region_context; + + mutex_lock(&opr_dev->lock); + + data_addr = &opr_dev->opr_context.data_area.data[address]; + + if (function == ACPI_READ) { + memcpy(value64, data_addr, bytes); + } else if (function == ACPI_WRITE) { + memcpy(data_addr, value64, bytes); + } else { + mutex_unlock(&opr_dev->lock); + return AE_BAD_PARAMETER; + } + + mutex_unlock(&opr_dev->lock); + + return AE_OK; +} + +static int acpi_find_eclite_device(struct ishtp_opregion_dev *opr_dev) +{ + struct acpi_device *adev; + + /* Find ECLite device and save reference */ + adev = acpi_dev_get_first_match_dev("INTC1035", NULL, -1); + if (!adev) { + dev_err(cl_data_to_dev(opr_dev), "eclite ACPI device not found\n"); + return -ENODEV; + } + + opr_dev->adev = adev; + + return 0; +} + +static int acpi_opregion_init(struct ishtp_opregion_dev *opr_dev) +{ + acpi_status status; + + status = acpi_install_address_space_handler(opr_dev->adev->handle, + ECLITE_CMD_OPREGION_ID, + ecl_opregion_cmd_handler, + NULL, opr_dev); + if (ACPI_FAILURE(status)) { + dev_err(cl_data_to_dev(opr_dev), + "cmd space handler install failed\n"); + return -ENODEV; + } + + status = acpi_install_address_space_handler(opr_dev->adev->handle, + ECLITE_DATA_OPREGION_ID, + ecl_opregion_data_handler, + NULL, opr_dev); + if (ACPI_FAILURE(status)) { + dev_err(cl_data_to_dev(opr_dev), + "data space handler install failed\n"); + + acpi_remove_address_space_handler(opr_dev->adev->handle, + ECLITE_CMD_OPREGION_ID, + ecl_opregion_cmd_handler); + return -ENODEV; + } + opr_dev->acpi_init_done = true; + + dev_dbg(cl_data_to_dev(opr_dev), "Opregion handlers are installed\n"); + + return 0; +} + +static void acpi_opregion_deinit(struct ishtp_opregion_dev *opr_dev) +{ + acpi_remove_address_space_handler(opr_dev->adev->handle, + ECLITE_CMD_OPREGION_ID, + ecl_opregion_cmd_handler); + + acpi_remove_address_space_handler(opr_dev->adev->handle, + ECLITE_DATA_OPREGION_ID, + ecl_opregion_data_handler); + opr_dev->acpi_init_done = false; +} + +static void ecl_acpi_invoke_dsm(struct work_struct *work) +{ + struct ishtp_opregion_dev *opr_dev; + union acpi_object *obj; + + opr_dev = container_of(work, struct ishtp_opregion_dev, event_work); + if (!opr_dev->acpi_init_done) + return; + + obj = acpi_evaluate_dsm(opr_dev->adev->handle, &ecl_acpi_guid, 0, + opr_dev->dsm_event_id, NULL); + if (!obj) { + dev_warn(cl_data_to_dev(opr_dev), "_DSM fn call failed\n"); + return; + } + + dev_dbg(cl_data_to_dev(opr_dev), "Exec DSM function code: %d success\n", + opr_dev->dsm_event_id); + + ACPI_FREE(obj); +} + +static void ecl_ish_process_rx_data(struct ishtp_opregion_dev *opr_dev) +{ + struct ecl_message *message = + (struct ecl_message *)opr_dev->rb->buffer.data; + + dev_dbg(cl_data_to_dev(opr_dev), + "[ish_rd] Resp: off : %x, len : %x\n", + message->header.offset, + message->header.data_len); + + if ((message->header.offset + message->header.data_len) > + ECL_DATA_OPR_BUFLEN) { + return; + } + + memcpy(opr_dev->opr_context.data_area.data + message->header.offset, + message->payload, message->header.data_len); + + opr_dev->ish_read_done = true; + wake_up_interruptible(&opr_dev->read_wait); +} + +static void ecl_ish_process_rx_event(struct ishtp_opregion_dev *opr_dev) +{ + struct ecl_message_header *header = + (struct ecl_message_header *)opr_dev->rb->buffer.data; + + dev_dbg(cl_data_to_dev(opr_dev), + "[ish_ev] Evt received: %8x\n", header->event); + + opr_dev->dsm_event_id = header->event; + schedule_work(&opr_dev->event_work); +} + +static int ecl_ish_cl_enable_events(struct ishtp_opregion_dev *opr_dev, + bool config_enable) +{ + struct ecl_message message; + int len; + + message.header.version = ECL_ISH_HEADER_VERSION; + message.header.data_type = ECL_MSG_DATA; + message.header.request_type = ECL_ISH_WRITE; + message.header.offset = ECL_EVENTS_NOTIFY; + message.header.data_len = 1; + message.payload[0] = config_enable; + + len = sizeof(struct ecl_message_header) + message.header.data_len; + + return ishtp_cl_send(opr_dev->ecl_ishtp_cl, (uint8_t *)&message, len); +} + +static void ecl_ishtp_cl_event_cb(struct ishtp_cl_device *cl_device) +{ + struct ishtp_cl *ecl_ishtp_cl = ishtp_get_drvdata(cl_device); + struct ishtp_opregion_dev *opr_dev; + struct ecl_message_header *header; + struct ishtp_cl_rb *rb; + + opr_dev = ishtp_get_client_data(ecl_ishtp_cl); + while ((rb = ishtp_cl_rx_get_rb(opr_dev->ecl_ishtp_cl)) != NULL) { + opr_dev->rb = rb; + header = (struct ecl_message_header *)rb->buffer.data; + + if (header->data_type == ECL_MSG_DATA) + ecl_ish_process_rx_data(opr_dev); + else if (header->data_type == ECL_MSG_EVENT) + ecl_ish_process_rx_event(opr_dev); + else + /* Got an event with wrong data_type, ignore it */ + dev_err(cl_data_to_dev(opr_dev), + "[ish_cb] Received wrong data_type\n"); + + ishtp_cl_io_rb_recycle(rb); + } +} + +static int ecl_ishtp_cl_init(struct ishtp_cl *ecl_ishtp_cl) +{ + struct ishtp_opregion_dev *opr_dev = + ishtp_get_client_data(ecl_ishtp_cl); + struct ishtp_fw_client *fw_client; + struct ishtp_device *dev; + int rv; + + rv = ishtp_cl_link(ecl_ishtp_cl); + if (rv) { + dev_err(cl_data_to_dev(opr_dev), "ishtp_cl_link failed\n"); + return rv; + } + + dev = ishtp_get_ishtp_device(ecl_ishtp_cl); + + /* Connect to FW client */ + ishtp_set_tx_ring_size(ecl_ishtp_cl, ECL_CL_TX_RING_SIZE); + ishtp_set_rx_ring_size(ecl_ishtp_cl, ECL_CL_RX_RING_SIZE); + + fw_client = ishtp_fw_cl_get_client(dev, &ecl_ishtp_id_table[0].guid); + if (!fw_client) { + dev_err(cl_data_to_dev(opr_dev), "fw client not found\n"); + return -ENOENT; + } + + ishtp_cl_set_fw_client_id(ecl_ishtp_cl, + ishtp_get_fw_client_id(fw_client)); + + ishtp_set_connection_state(ecl_ishtp_cl, ISHTP_CL_CONNECTING); + + rv = ishtp_cl_connect(ecl_ishtp_cl); + if (rv) { + dev_err(cl_data_to_dev(opr_dev), "client connect failed\n"); + + ishtp_cl_unlink(ecl_ishtp_cl); + return rv; + } + + dev_dbg(cl_data_to_dev(opr_dev), "Host connected to fw client\n"); + + return 0; +} + +static void ecl_ishtp_cl_deinit(struct ishtp_cl *ecl_ishtp_cl) +{ + ishtp_cl_unlink(ecl_ishtp_cl); + ishtp_cl_flush_queues(ecl_ishtp_cl); + ishtp_cl_free(ecl_ishtp_cl); +} + +static void ecl_ishtp_cl_reset_handler(struct work_struct *work) +{ + struct ishtp_opregion_dev *opr_dev; + struct ishtp_cl_device *cl_device; + struct ishtp_cl *ecl_ishtp_cl; + int rv; + int retry; + + opr_dev = container_of(work, struct ishtp_opregion_dev, reset_work); + + opr_dev->ish_link_ready = false; + + cl_device = opr_dev->cl_device; + ecl_ishtp_cl = opr_dev->ecl_ishtp_cl; + + ecl_ishtp_cl_deinit(ecl_ishtp_cl); + + ecl_ishtp_cl = ishtp_cl_allocate(cl_device); + if (!ecl_ishtp_cl) + return; + + ishtp_set_drvdata(cl_device, ecl_ishtp_cl); + ishtp_set_client_data(ecl_ishtp_cl, opr_dev); + + opr_dev->ecl_ishtp_cl = ecl_ishtp_cl; + + for (retry = 0; retry < 3; ++retry) { + rv = ecl_ishtp_cl_init(ecl_ishtp_cl); + if (!rv) + break; + } + if (rv) { + ishtp_cl_free(ecl_ishtp_cl); + opr_dev->ecl_ishtp_cl = NULL; + dev_err(cl_data_to_dev(opr_dev), + "[ish_rst] Reset failed. Link not ready.\n"); + return; + } + + ishtp_register_event_cb(cl_device, ecl_ishtp_cl_event_cb); + dev_info(cl_data_to_dev(opr_dev), + "[ish_rst] Reset Success. Link ready.\n"); + + opr_dev->ish_link_ready = true; + + if (opr_dev->acpi_init_done) + return; + + rv = acpi_opregion_init(opr_dev); + if (rv) { + dev_err(cl_data_to_dev(opr_dev), + "ACPI opregion init failed\n"); + } +} + +static int ecl_ishtp_cl_probe(struct ishtp_cl_device *cl_device) +{ + struct ishtp_cl *ecl_ishtp_cl; + struct ishtp_opregion_dev *opr_dev; + int rv; + + opr_dev = devm_kzalloc(ishtp_device(cl_device), sizeof(*opr_dev), + GFP_KERNEL); + if (!opr_dev) + return -ENOMEM; + + ecl_ishtp_cl = ishtp_cl_allocate(cl_device); + if (!ecl_ishtp_cl) + return -ENOMEM; + + ishtp_set_drvdata(cl_device, ecl_ishtp_cl); + ishtp_set_client_data(ecl_ishtp_cl, opr_dev); + opr_dev->ecl_ishtp_cl = ecl_ishtp_cl; + opr_dev->cl_device = cl_device; + + init_waitqueue_head(&opr_dev->read_wait); + INIT_WORK(&opr_dev->event_work, ecl_acpi_invoke_dsm); + INIT_WORK(&opr_dev->reset_work, ecl_ishtp_cl_reset_handler); + + /* Initialize ish client device */ + rv = ecl_ishtp_cl_init(ecl_ishtp_cl); + if (rv) { + dev_err(cl_data_to_dev(opr_dev), "Client init failed\n"); + goto err_exit; + } + + dev_dbg(cl_data_to_dev(opr_dev), "eclite-ishtp client initialised\n"); + + opr_dev->ish_link_ready = true; + mutex_init(&opr_dev->lock); + + rv = acpi_find_eclite_device(opr_dev); + if (rv) { + dev_err(cl_data_to_dev(opr_dev), "ECLite ACPI ID not found\n"); + goto err_exit; + } + + /* Register a handler for eclite fw events */ + ishtp_register_event_cb(cl_device, ecl_ishtp_cl_event_cb); + + /* Now init opregion handlers */ + rv = acpi_opregion_init(opr_dev); + if (rv) { + dev_err(cl_data_to_dev(opr_dev), "ACPI opregion init failed\n"); + goto err_exit; + } + + /* Reprobe devices depending on ECLite - battery, fan, etc. */ + acpi_dev_clear_dependencies(opr_dev->adev); + + return 0; +err_exit: + ishtp_set_connection_state(ecl_ishtp_cl, ISHTP_CL_DISCONNECTING); + ishtp_cl_disconnect(ecl_ishtp_cl); + ecl_ishtp_cl_deinit(ecl_ishtp_cl); + + return rv; +} + +static void ecl_ishtp_cl_remove(struct ishtp_cl_device *cl_device) +{ + struct ishtp_cl *ecl_ishtp_cl = ishtp_get_drvdata(cl_device); + struct ishtp_opregion_dev *opr_dev = + ishtp_get_client_data(ecl_ishtp_cl); + + if (opr_dev->acpi_init_done) + acpi_opregion_deinit(opr_dev); + + acpi_dev_put(opr_dev->adev); + + ishtp_set_connection_state(ecl_ishtp_cl, ISHTP_CL_DISCONNECTING); + ishtp_cl_disconnect(ecl_ishtp_cl); + ecl_ishtp_cl_deinit(ecl_ishtp_cl); + + cancel_work_sync(&opr_dev->reset_work); + cancel_work_sync(&opr_dev->event_work); +} + +static int ecl_ishtp_cl_reset(struct ishtp_cl_device *cl_device) +{ + struct ishtp_cl *ecl_ishtp_cl = ishtp_get_drvdata(cl_device); + struct ishtp_opregion_dev *opr_dev = + ishtp_get_client_data(ecl_ishtp_cl); + + schedule_work(&opr_dev->reset_work); + + return 0; +} + +static int ecl_ishtp_cl_suspend(struct device *device) +{ + struct ishtp_cl_device *cl_device = ishtp_dev_to_cl_device(device); + struct ishtp_cl *ecl_ishtp_cl = ishtp_get_drvdata(cl_device); + struct ishtp_opregion_dev *opr_dev = + ishtp_get_client_data(ecl_ishtp_cl); + + if (acpi_target_system_state() == ACPI_STATE_S0) + return 0; + + acpi_opregion_deinit(opr_dev); + ecl_ish_cl_enable_events(opr_dev, false); + + return 0; +} + +static int ecl_ishtp_cl_resume(struct device *device) +{ + /* A reset is expected to call after an Sx. At this point + * we are not sure if the link is up or not to restore anything, + * so do nothing in resume path + */ + return 0; +} + +static const struct dev_pm_ops ecl_ishtp_pm_ops = { + .suspend = ecl_ishtp_cl_suspend, + .resume = ecl_ishtp_cl_resume, +}; + +static struct ishtp_cl_driver ecl_ishtp_cl_driver = { + .name = "ishtp-eclite", + .id = ecl_ishtp_id_table, + .probe = ecl_ishtp_cl_probe, + .remove = ecl_ishtp_cl_remove, + .reset = ecl_ishtp_cl_reset, + .driver.pm = &ecl_ishtp_pm_ops, +}; + +static int __init ecl_ishtp_init(void) +{ + return ishtp_cl_driver_register(&ecl_ishtp_cl_driver, THIS_MODULE); +} + +static void __exit ecl_ishtp_exit(void) +{ + return ishtp_cl_driver_unregister(&ecl_ishtp_cl_driver); +} + +late_initcall(ecl_ishtp_init); +module_exit(ecl_ishtp_exit); + +MODULE_DESCRIPTION("ISH ISHTP eclite client opregion driver"); +MODULE_AUTHOR("K Naduvalath, Sumesh <sumesh.k.naduvalath@intel.com>"); + +MODULE_LICENSE("GPL v2"); diff --git a/drivers/platform/x86/intel/mrfld_pwrbtn.c b/drivers/platform/x86/intel/mrfld_pwrbtn.c new file mode 100644 index 000000000..d58fea517 --- /dev/null +++ b/drivers/platform/x86/intel/mrfld_pwrbtn.c @@ -0,0 +1,107 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Power-button driver for Basin Cove PMIC + * + * Copyright (c) 2019, Intel Corporation. + * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> + */ + +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/mfd/intel_soc_pmic.h> +#include <linux/mfd/intel_soc_pmic_mrfld.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pm_wakeirq.h> +#include <linux/slab.h> + +#define BCOVE_PBSTATUS 0x27 +#define BCOVE_PBSTATUS_PBLVL BIT(4) /* 1 - release, 0 - press */ + +static irqreturn_t mrfld_pwrbtn_interrupt(int irq, void *dev_id) +{ + struct input_dev *input = dev_id; + struct device *dev = input->dev.parent; + struct regmap *regmap = dev_get_drvdata(dev); + unsigned int state; + int ret; + + ret = regmap_read(regmap, BCOVE_PBSTATUS, &state); + if (ret) + return IRQ_NONE; + + dev_dbg(dev, "PBSTATUS=0x%x\n", state); + input_report_key(input, KEY_POWER, !(state & BCOVE_PBSTATUS_PBLVL)); + input_sync(input); + + regmap_update_bits(regmap, BCOVE_MIRQLVL1, BCOVE_LVL1_PWRBTN, 0); + return IRQ_HANDLED; +} + +static int mrfld_pwrbtn_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct intel_soc_pmic *pmic = dev_get_drvdata(dev->parent); + struct input_dev *input; + int irq, ret; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + input = devm_input_allocate_device(dev); + if (!input) + return -ENOMEM; + input->name = pdev->name; + input->phys = "power-button/input0"; + input->id.bustype = BUS_HOST; + input->dev.parent = dev; + input_set_capability(input, EV_KEY, KEY_POWER); + ret = input_register_device(input); + if (ret) + return ret; + + dev_set_drvdata(dev, pmic->regmap); + + ret = devm_request_threaded_irq(dev, irq, NULL, mrfld_pwrbtn_interrupt, + IRQF_ONESHOT | IRQF_SHARED, pdev->name, + input); + if (ret) + return ret; + + regmap_update_bits(pmic->regmap, BCOVE_MIRQLVL1, BCOVE_LVL1_PWRBTN, 0); + regmap_update_bits(pmic->regmap, BCOVE_MPBIRQ, BCOVE_PBIRQ_PBTN, 0); + + device_init_wakeup(dev, true); + dev_pm_set_wake_irq(dev, irq); + return 0; +} + +static int mrfld_pwrbtn_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + + dev_pm_clear_wake_irq(dev); + device_init_wakeup(dev, false); + return 0; +} + +static const struct platform_device_id mrfld_pwrbtn_id_table[] = { + { .name = "mrfld_bcove_pwrbtn" }, + {} +}; +MODULE_DEVICE_TABLE(platform, mrfld_pwrbtn_id_table); + +static struct platform_driver mrfld_pwrbtn_driver = { + .driver = { + .name = "mrfld_bcove_pwrbtn", + }, + .probe = mrfld_pwrbtn_probe, + .remove = mrfld_pwrbtn_remove, + .id_table = mrfld_pwrbtn_id_table, +}; +module_platform_driver(mrfld_pwrbtn_driver); + +MODULE_DESCRIPTION("Power-button driver for Basin Cove PMIC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/platform/x86/intel/oaktrail.c b/drivers/platform/x86/intel/oaktrail.c new file mode 100644 index 000000000..7c5c62363 --- /dev/null +++ b/drivers/platform/x86/intel/oaktrail.c @@ -0,0 +1,377 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Intel OakTrail Platform support + * + * Copyright (C) 2010-2011 Intel Corporation + * Author: Yin Kangkai (kangkai.yin@intel.com) + * + * based on Compal driver, Copyright (C) 2008 Cezary Jackiewicz + * <cezary.jackiewicz (at) gmail.com>, based on MSI driver + * Copyright (C) 2006 Lennart Poettering <mzxreary (at) 0pointer (dot) de> + * + * This driver does below things: + * 1. registers itself in the Linux backlight control in + * /sys/class/backlight/intel_oaktrail/ + * + * 2. registers in the rfkill subsystem here: /sys/class/rfkill/rfkillX/ + * for these components: wifi, bluetooth, wwan (3g), gps + * + * This driver might work on other products based on Oaktrail. If you + * want to try it you can pass force=1 as argument to the module which + * will force it to load even when the DMI data doesn't identify the + * product as compatible. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/acpi.h> +#include <linux/backlight.h> +#include <linux/dmi.h> +#include <linux/err.h> +#include <linux/fb.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> +#include <linux/rfkill.h> + +#include <acpi/video.h> + +#define DRIVER_NAME "intel_oaktrail" +#define DRIVER_VERSION "0.4ac1" + +/* + * This is the devices status address in EC space, and the control bits + * definition: + * + * (1 << 0): Camera enable/disable, RW. + * (1 << 1): Bluetooth enable/disable, RW. + * (1 << 2): GPS enable/disable, RW. + * (1 << 3): WiFi enable/disable, RW. + * (1 << 4): WWAN (3G) enable/disable, RW. + * (1 << 5): Touchscreen enable/disable, Read Only. + */ +#define OT_EC_DEVICE_STATE_ADDRESS 0xD6 + +#define OT_EC_CAMERA_MASK (1 << 0) +#define OT_EC_BT_MASK (1 << 1) +#define OT_EC_GPS_MASK (1 << 2) +#define OT_EC_WIFI_MASK (1 << 3) +#define OT_EC_WWAN_MASK (1 << 4) +#define OT_EC_TS_MASK (1 << 5) + +/* + * This is the address in EC space and commands used to control LCD backlight: + * + * Two steps needed to change the LCD backlight: + * 1. write the backlight percentage into OT_EC_BL_BRIGHTNESS_ADDRESS; + * 2. write OT_EC_BL_CONTROL_ON_DATA into OT_EC_BL_CONTROL_ADDRESS. + * + * To read the LCD back light, just read out the value from + * OT_EC_BL_BRIGHTNESS_ADDRESS. + * + * LCD backlight brightness range: 0 - 100 (OT_EC_BL_BRIGHTNESS_MAX) + */ +#define OT_EC_BL_BRIGHTNESS_ADDRESS 0x44 +#define OT_EC_BL_BRIGHTNESS_MAX 100 +#define OT_EC_BL_CONTROL_ADDRESS 0x3A +#define OT_EC_BL_CONTROL_ON_DATA 0x1A + + +static bool force; +module_param(force, bool, 0); +MODULE_PARM_DESC(force, "Force driver load, ignore DMI data"); + +static struct platform_device *oaktrail_device; +static struct backlight_device *oaktrail_bl_device; +static struct rfkill *bt_rfkill; +static struct rfkill *gps_rfkill; +static struct rfkill *wifi_rfkill; +static struct rfkill *wwan_rfkill; + + +/* rfkill */ +static int oaktrail_rfkill_set(void *data, bool blocked) +{ + u8 value; + u8 result; + unsigned long radio = (unsigned long) data; + + ec_read(OT_EC_DEVICE_STATE_ADDRESS, &result); + + if (!blocked) + value = (u8) (result | radio); + else + value = (u8) (result & ~radio); + + ec_write(OT_EC_DEVICE_STATE_ADDRESS, value); + + return 0; +} + +static const struct rfkill_ops oaktrail_rfkill_ops = { + .set_block = oaktrail_rfkill_set, +}; + +static struct rfkill *oaktrail_rfkill_new(char *name, enum rfkill_type type, + unsigned long mask) +{ + struct rfkill *rfkill_dev; + u8 value; + int err; + + rfkill_dev = rfkill_alloc(name, &oaktrail_device->dev, type, + &oaktrail_rfkill_ops, (void *)mask); + if (!rfkill_dev) + return ERR_PTR(-ENOMEM); + + ec_read(OT_EC_DEVICE_STATE_ADDRESS, &value); + rfkill_init_sw_state(rfkill_dev, (value & mask) != 1); + + err = rfkill_register(rfkill_dev); + if (err) { + rfkill_destroy(rfkill_dev); + return ERR_PTR(err); + } + + return rfkill_dev; +} + +static inline void __oaktrail_rfkill_cleanup(struct rfkill *rf) +{ + if (rf) { + rfkill_unregister(rf); + rfkill_destroy(rf); + } +} + +static void oaktrail_rfkill_cleanup(void) +{ + __oaktrail_rfkill_cleanup(wifi_rfkill); + __oaktrail_rfkill_cleanup(bt_rfkill); + __oaktrail_rfkill_cleanup(gps_rfkill); + __oaktrail_rfkill_cleanup(wwan_rfkill); +} + +static int oaktrail_rfkill_init(void) +{ + int ret; + + wifi_rfkill = oaktrail_rfkill_new("oaktrail-wifi", + RFKILL_TYPE_WLAN, + OT_EC_WIFI_MASK); + if (IS_ERR(wifi_rfkill)) { + ret = PTR_ERR(wifi_rfkill); + wifi_rfkill = NULL; + goto cleanup; + } + + bt_rfkill = oaktrail_rfkill_new("oaktrail-bluetooth", + RFKILL_TYPE_BLUETOOTH, + OT_EC_BT_MASK); + if (IS_ERR(bt_rfkill)) { + ret = PTR_ERR(bt_rfkill); + bt_rfkill = NULL; + goto cleanup; + } + + gps_rfkill = oaktrail_rfkill_new("oaktrail-gps", + RFKILL_TYPE_GPS, + OT_EC_GPS_MASK); + if (IS_ERR(gps_rfkill)) { + ret = PTR_ERR(gps_rfkill); + gps_rfkill = NULL; + goto cleanup; + } + + wwan_rfkill = oaktrail_rfkill_new("oaktrail-wwan", + RFKILL_TYPE_WWAN, + OT_EC_WWAN_MASK); + if (IS_ERR(wwan_rfkill)) { + ret = PTR_ERR(wwan_rfkill); + wwan_rfkill = NULL; + goto cleanup; + } + + return 0; + +cleanup: + oaktrail_rfkill_cleanup(); + return ret; +} + + +/* backlight */ +static int get_backlight_brightness(struct backlight_device *b) +{ + u8 value; + ec_read(OT_EC_BL_BRIGHTNESS_ADDRESS, &value); + + return value; +} + +static int set_backlight_brightness(struct backlight_device *b) +{ + u8 percent = (u8) b->props.brightness; + if (percent < 0 || percent > OT_EC_BL_BRIGHTNESS_MAX) + return -EINVAL; + + ec_write(OT_EC_BL_BRIGHTNESS_ADDRESS, percent); + ec_write(OT_EC_BL_CONTROL_ADDRESS, OT_EC_BL_CONTROL_ON_DATA); + + return 0; +} + +static const struct backlight_ops oaktrail_bl_ops = { + .get_brightness = get_backlight_brightness, + .update_status = set_backlight_brightness, +}; + +static int oaktrail_backlight_init(void) +{ + struct backlight_device *bd; + struct backlight_properties props; + + memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_PLATFORM; + props.max_brightness = OT_EC_BL_BRIGHTNESS_MAX; + bd = backlight_device_register(DRIVER_NAME, + &oaktrail_device->dev, NULL, + &oaktrail_bl_ops, + &props); + + if (IS_ERR(bd)) { + oaktrail_bl_device = NULL; + pr_warn("Unable to register backlight device\n"); + return PTR_ERR(bd); + } + + oaktrail_bl_device = bd; + + bd->props.brightness = get_backlight_brightness(bd); + bd->props.power = FB_BLANK_UNBLANK; + backlight_update_status(bd); + + return 0; +} + +static void oaktrail_backlight_exit(void) +{ + backlight_device_unregister(oaktrail_bl_device); +} + +static int oaktrail_probe(struct platform_device *pdev) +{ + return 0; +} + +static int oaktrail_remove(struct platform_device *pdev) +{ + return 0; +} + +static struct platform_driver oaktrail_driver = { + .driver = { + .name = DRIVER_NAME, + }, + .probe = oaktrail_probe, + .remove = oaktrail_remove, +}; + +static int dmi_check_cb(const struct dmi_system_id *id) +{ + pr_info("Identified model '%s'\n", id->ident); + return 0; +} + +static const struct dmi_system_id oaktrail_dmi_table[] __initconst = { + { + .ident = "OakTrail platform", + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "OakTrail platform"), + }, + .callback = dmi_check_cb + }, + { } +}; +MODULE_DEVICE_TABLE(dmi, oaktrail_dmi_table); + +static int __init oaktrail_init(void) +{ + int ret; + + if (acpi_disabled) { + pr_err("ACPI needs to be enabled for this driver to work!\n"); + return -ENODEV; + } + + if (!force && !dmi_check_system(oaktrail_dmi_table)) { + pr_err("Platform not recognized (You could try the module's force-parameter)"); + return -ENODEV; + } + + ret = platform_driver_register(&oaktrail_driver); + if (ret) { + pr_warn("Unable to register platform driver\n"); + goto err_driver_reg; + } + + oaktrail_device = platform_device_alloc(DRIVER_NAME, PLATFORM_DEVID_NONE); + if (!oaktrail_device) { + pr_warn("Unable to allocate platform device\n"); + ret = -ENOMEM; + goto err_device_alloc; + } + + ret = platform_device_add(oaktrail_device); + if (ret) { + pr_warn("Unable to add platform device\n"); + goto err_device_add; + } + + if (acpi_video_get_backlight_type() == acpi_backlight_vendor) { + ret = oaktrail_backlight_init(); + if (ret) + goto err_backlight; + } + + ret = oaktrail_rfkill_init(); + if (ret) { + pr_warn("Setup rfkill failed\n"); + goto err_rfkill; + } + + pr_info("Driver "DRIVER_VERSION" successfully loaded\n"); + return 0; + +err_rfkill: + oaktrail_backlight_exit(); +err_backlight: + platform_device_del(oaktrail_device); +err_device_add: + platform_device_put(oaktrail_device); +err_device_alloc: + platform_driver_unregister(&oaktrail_driver); +err_driver_reg: + + return ret; +} + +static void __exit oaktrail_cleanup(void) +{ + oaktrail_backlight_exit(); + oaktrail_rfkill_cleanup(); + platform_device_unregister(oaktrail_device); + platform_driver_unregister(&oaktrail_driver); + + pr_info("Driver unloaded\n"); +} + +module_init(oaktrail_init); +module_exit(oaktrail_cleanup); + +MODULE_AUTHOR("Yin Kangkai (kangkai.yin@intel.com)"); +MODULE_DESCRIPTION("Intel Oaktrail Platform ACPI Extras"); +MODULE_VERSION(DRIVER_VERSION); +MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/intel/pmc/Kconfig b/drivers/platform/x86/intel/pmc/Kconfig new file mode 100644 index 000000000..b526597e4 --- /dev/null +++ b/drivers/platform/x86/intel/pmc/Kconfig @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Intel x86 Platform-Specific Drivers +# + +config INTEL_PMC_CORE + tristate "Intel PMC Core driver" + depends on PCI + depends on ACPI + help + The Intel Platform Controller Hub for Intel Core SoCs provides access + to Power Management Controller registers via various interfaces. This + driver can utilize debugging capabilities and supported features as + exposed by the Power Management Controller. It also may perform some + tasks in the PMC in order to enable transition into the SLPS0 state. + It should be selected on all Intel platforms supported by the driver. + + Supported features: + - SLP_S0_RESIDENCY counter + - PCH IP Power Gating status + - LTR Ignore / LTR Show + - MPHY/PLL gating status (Sunrisepoint PCH only) + - SLPS0 Debug registers (Cannonlake/Icelake PCH) + - Low Power Mode registers (Tigerlake and beyond) + - PMC quirks as needed to enable SLPS0/S0ix diff --git a/drivers/platform/x86/intel/pmc/Makefile b/drivers/platform/x86/intel/pmc/Makefile new file mode 100644 index 000000000..8966fcdc0 --- /dev/null +++ b/drivers/platform/x86/intel/pmc/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Intel x86 Platform-Specific Drivers +# + +intel_pmc_core-y := core.o +obj-$(CONFIG_INTEL_PMC_CORE) += intel_pmc_core.o +intel_pmc_core_pltdrv-y := pltdrv.o +obj-$(CONFIG_INTEL_PMC_CORE) += intel_pmc_core_pltdrv.o diff --git a/drivers/platform/x86/intel/pmc/core.c b/drivers/platform/x86/intel/pmc/core.c new file mode 100644 index 000000000..be0fb9401 --- /dev/null +++ b/drivers/platform/x86/intel/pmc/core.c @@ -0,0 +1,2175 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel Core SoC Power Management Controller Driver + * + * Copyright (c) 2016, Intel Corporation. + * All Rights Reserved. + * + * Authors: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> + * Vishwanath Somayaji <vishwanath.somayaji@intel.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/acpi.h> +#include <linux/bitfield.h> +#include <linux/debugfs.h> +#include <linux/delay.h> +#include <linux/dmi.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/suspend.h> +#include <linux/uaccess.h> +#include <linux/uuid.h> + +#include <acpi/acpi_bus.h> +#include <asm/cpu_device_id.h> +#include <asm/intel-family.h> +#include <asm/msr.h> +#include <asm/tsc.h> + +#include "core.h" + +#define ACPI_S0IX_DSM_UUID "57a6512e-3979-4e9d-9708-ff13b2508972" +#define ACPI_GET_LOW_MODE_REGISTERS 1 + +/* PKGC MSRs are common across Intel Core SoCs */ +static const struct pmc_bit_map msr_map[] = { + {"Package C2", MSR_PKG_C2_RESIDENCY}, + {"Package C3", MSR_PKG_C3_RESIDENCY}, + {"Package C6", MSR_PKG_C6_RESIDENCY}, + {"Package C7", MSR_PKG_C7_RESIDENCY}, + {"Package C8", MSR_PKG_C8_RESIDENCY}, + {"Package C9", MSR_PKG_C9_RESIDENCY}, + {"Package C10", MSR_PKG_C10_RESIDENCY}, + {} +}; + +static const struct pmc_bit_map spt_pll_map[] = { + {"MIPI PLL", SPT_PMC_BIT_MPHY_CMN_LANE0}, + {"GEN2 USB2PCIE2 PLL", SPT_PMC_BIT_MPHY_CMN_LANE1}, + {"DMIPCIE3 PLL", SPT_PMC_BIT_MPHY_CMN_LANE2}, + {"SATA PLL", SPT_PMC_BIT_MPHY_CMN_LANE3}, + {} +}; + +static const struct pmc_bit_map spt_mphy_map[] = { + {"MPHY CORE LANE 0", SPT_PMC_BIT_MPHY_LANE0}, + {"MPHY CORE LANE 1", SPT_PMC_BIT_MPHY_LANE1}, + {"MPHY CORE LANE 2", SPT_PMC_BIT_MPHY_LANE2}, + {"MPHY CORE LANE 3", SPT_PMC_BIT_MPHY_LANE3}, + {"MPHY CORE LANE 4", SPT_PMC_BIT_MPHY_LANE4}, + {"MPHY CORE LANE 5", SPT_PMC_BIT_MPHY_LANE5}, + {"MPHY CORE LANE 6", SPT_PMC_BIT_MPHY_LANE6}, + {"MPHY CORE LANE 7", SPT_PMC_BIT_MPHY_LANE7}, + {"MPHY CORE LANE 8", SPT_PMC_BIT_MPHY_LANE8}, + {"MPHY CORE LANE 9", SPT_PMC_BIT_MPHY_LANE9}, + {"MPHY CORE LANE 10", SPT_PMC_BIT_MPHY_LANE10}, + {"MPHY CORE LANE 11", SPT_PMC_BIT_MPHY_LANE11}, + {"MPHY CORE LANE 12", SPT_PMC_BIT_MPHY_LANE12}, + {"MPHY CORE LANE 13", SPT_PMC_BIT_MPHY_LANE13}, + {"MPHY CORE LANE 14", SPT_PMC_BIT_MPHY_LANE14}, + {"MPHY CORE LANE 15", SPT_PMC_BIT_MPHY_LANE15}, + {} +}; + +static const struct pmc_bit_map spt_pfear_map[] = { + {"PMC", SPT_PMC_BIT_PMC}, + {"OPI-DMI", SPT_PMC_BIT_OPI}, + {"SPI / eSPI", SPT_PMC_BIT_SPI}, + {"XHCI", SPT_PMC_BIT_XHCI}, + {"SPA", SPT_PMC_BIT_SPA}, + {"SPB", SPT_PMC_BIT_SPB}, + {"SPC", SPT_PMC_BIT_SPC}, + {"GBE", SPT_PMC_BIT_GBE}, + {"SATA", SPT_PMC_BIT_SATA}, + {"HDA-PGD0", SPT_PMC_BIT_HDA_PGD0}, + {"HDA-PGD1", SPT_PMC_BIT_HDA_PGD1}, + {"HDA-PGD2", SPT_PMC_BIT_HDA_PGD2}, + {"HDA-PGD3", SPT_PMC_BIT_HDA_PGD3}, + {"RSVD", SPT_PMC_BIT_RSVD_0B}, + {"LPSS", SPT_PMC_BIT_LPSS}, + {"LPC", SPT_PMC_BIT_LPC}, + {"SMB", SPT_PMC_BIT_SMB}, + {"ISH", SPT_PMC_BIT_ISH}, + {"P2SB", SPT_PMC_BIT_P2SB}, + {"DFX", SPT_PMC_BIT_DFX}, + {"SCC", SPT_PMC_BIT_SCC}, + {"RSVD", SPT_PMC_BIT_RSVD_0C}, + {"FUSE", SPT_PMC_BIT_FUSE}, + {"CAMERA", SPT_PMC_BIT_CAMREA}, + {"RSVD", SPT_PMC_BIT_RSVD_0D}, + {"USB3-OTG", SPT_PMC_BIT_USB3_OTG}, + {"EXI", SPT_PMC_BIT_EXI}, + {"CSE", SPT_PMC_BIT_CSE}, + {"CSME_KVM", SPT_PMC_BIT_CSME_KVM}, + {"CSME_PMT", SPT_PMC_BIT_CSME_PMT}, + {"CSME_CLINK", SPT_PMC_BIT_CSME_CLINK}, + {"CSME_PTIO", SPT_PMC_BIT_CSME_PTIO}, + {"CSME_USBR", SPT_PMC_BIT_CSME_USBR}, + {"CSME_SUSRAM", SPT_PMC_BIT_CSME_SUSRAM}, + {"CSME_SMT", SPT_PMC_BIT_CSME_SMT}, + {"RSVD", SPT_PMC_BIT_RSVD_1A}, + {"CSME_SMS2", SPT_PMC_BIT_CSME_SMS2}, + {"CSME_SMS1", SPT_PMC_BIT_CSME_SMS1}, + {"CSME_RTC", SPT_PMC_BIT_CSME_RTC}, + {"CSME_PSF", SPT_PMC_BIT_CSME_PSF}, + {} +}; + +static const struct pmc_bit_map *ext_spt_pfear_map[] = { + /* + * Check intel_pmc_core_ids[] users of spt_reg_map for + * a list of core SoCs using this. + */ + spt_pfear_map, + NULL +}; + +static const struct pmc_bit_map spt_ltr_show_map[] = { + {"SOUTHPORT_A", SPT_PMC_LTR_SPA}, + {"SOUTHPORT_B", SPT_PMC_LTR_SPB}, + {"SATA", SPT_PMC_LTR_SATA}, + {"GIGABIT_ETHERNET", SPT_PMC_LTR_GBE}, + {"XHCI", SPT_PMC_LTR_XHCI}, + {"Reserved", SPT_PMC_LTR_RESERVED}, + {"ME", SPT_PMC_LTR_ME}, + /* EVA is Enterprise Value Add, doesn't really exist on PCH */ + {"EVA", SPT_PMC_LTR_EVA}, + {"SOUTHPORT_C", SPT_PMC_LTR_SPC}, + {"HD_AUDIO", SPT_PMC_LTR_AZ}, + {"LPSS", SPT_PMC_LTR_LPSS}, + {"SOUTHPORT_D", SPT_PMC_LTR_SPD}, + {"SOUTHPORT_E", SPT_PMC_LTR_SPE}, + {"CAMERA", SPT_PMC_LTR_CAM}, + {"ESPI", SPT_PMC_LTR_ESPI}, + {"SCC", SPT_PMC_LTR_SCC}, + {"ISH", SPT_PMC_LTR_ISH}, + /* Below two cannot be used for LTR_IGNORE */ + {"CURRENT_PLATFORM", SPT_PMC_LTR_CUR_PLT}, + {"AGGREGATED_SYSTEM", SPT_PMC_LTR_CUR_ASLT}, + {} +}; + +static const struct pmc_reg_map spt_reg_map = { + .pfear_sts = ext_spt_pfear_map, + .mphy_sts = spt_mphy_map, + .pll_sts = spt_pll_map, + .ltr_show_sts = spt_ltr_show_map, + .msr_sts = msr_map, + .slp_s0_offset = SPT_PMC_SLP_S0_RES_COUNTER_OFFSET, + .slp_s0_res_counter_step = SPT_PMC_SLP_S0_RES_COUNTER_STEP, + .ltr_ignore_offset = SPT_PMC_LTR_IGNORE_OFFSET, + .regmap_length = SPT_PMC_MMIO_REG_LEN, + .ppfear0_offset = SPT_PMC_XRAM_PPFEAR0A, + .ppfear_buckets = SPT_PPFEAR_NUM_ENTRIES, + .pm_cfg_offset = SPT_PMC_PM_CFG_OFFSET, + .pm_read_disable_bit = SPT_PMC_READ_DISABLE_BIT, + .ltr_ignore_max = SPT_NUM_IP_IGN_ALLOWED, + .pm_vric1_offset = SPT_PMC_VRIC1_OFFSET, +}; + +/* Cannon Lake: PGD PFET Enable Ack Status Register(s) bitmap */ +static const struct pmc_bit_map cnp_pfear_map[] = { + {"PMC", BIT(0)}, + {"OPI-DMI", BIT(1)}, + {"SPI/eSPI", BIT(2)}, + {"XHCI", BIT(3)}, + {"SPA", BIT(4)}, + {"SPB", BIT(5)}, + {"SPC", BIT(6)}, + {"GBE", BIT(7)}, + + {"SATA", BIT(0)}, + {"HDA_PGD0", BIT(1)}, + {"HDA_PGD1", BIT(2)}, + {"HDA_PGD2", BIT(3)}, + {"HDA_PGD3", BIT(4)}, + {"SPD", BIT(5)}, + {"LPSS", BIT(6)}, + {"LPC", BIT(7)}, + + {"SMB", BIT(0)}, + {"ISH", BIT(1)}, + {"P2SB", BIT(2)}, + {"NPK_VNN", BIT(3)}, + {"SDX", BIT(4)}, + {"SPE", BIT(5)}, + {"Fuse", BIT(6)}, + {"SBR8", BIT(7)}, + + {"CSME_FSC", BIT(0)}, + {"USB3_OTG", BIT(1)}, + {"EXI", BIT(2)}, + {"CSE", BIT(3)}, + {"CSME_KVM", BIT(4)}, + {"CSME_PMT", BIT(5)}, + {"CSME_CLINK", BIT(6)}, + {"CSME_PTIO", BIT(7)}, + + {"CSME_USBR", BIT(0)}, + {"CSME_SUSRAM", BIT(1)}, + {"CSME_SMT1", BIT(2)}, + {"CSME_SMT4", BIT(3)}, + {"CSME_SMS2", BIT(4)}, + {"CSME_SMS1", BIT(5)}, + {"CSME_RTC", BIT(6)}, + {"CSME_PSF", BIT(7)}, + + {"SBR0", BIT(0)}, + {"SBR1", BIT(1)}, + {"SBR2", BIT(2)}, + {"SBR3", BIT(3)}, + {"SBR4", BIT(4)}, + {"SBR5", BIT(5)}, + {"CSME_PECI", BIT(6)}, + {"PSF1", BIT(7)}, + + {"PSF2", BIT(0)}, + {"PSF3", BIT(1)}, + {"PSF4", BIT(2)}, + {"CNVI", BIT(3)}, + {"UFS0", BIT(4)}, + {"EMMC", BIT(5)}, + {"SPF", BIT(6)}, + {"SBR6", BIT(7)}, + + {"SBR7", BIT(0)}, + {"NPK_AON", BIT(1)}, + {"HDA_PGD4", BIT(2)}, + {"HDA_PGD5", BIT(3)}, + {"HDA_PGD6", BIT(4)}, + {"PSF6", BIT(5)}, + {"PSF7", BIT(6)}, + {"PSF8", BIT(7)}, + {} +}; + +static const struct pmc_bit_map *ext_cnp_pfear_map[] = { + /* + * Check intel_pmc_core_ids[] users of cnp_reg_map for + * a list of core SoCs using this. + */ + cnp_pfear_map, + NULL +}; + +static const struct pmc_bit_map icl_pfear_map[] = { + {"RES_65", BIT(0)}, + {"RES_66", BIT(1)}, + {"RES_67", BIT(2)}, + {"TAM", BIT(3)}, + {"GBETSN", BIT(4)}, + {"TBTLSX", BIT(5)}, + {"RES_71", BIT(6)}, + {"RES_72", BIT(7)}, + {} +}; + +static const struct pmc_bit_map *ext_icl_pfear_map[] = { + /* + * Check intel_pmc_core_ids[] users of icl_reg_map for + * a list of core SoCs using this. + */ + cnp_pfear_map, + icl_pfear_map, + NULL +}; + +static const struct pmc_bit_map tgl_pfear_map[] = { + {"PSF9", BIT(0)}, + {"RES_66", BIT(1)}, + {"RES_67", BIT(2)}, + {"RES_68", BIT(3)}, + {"RES_69", BIT(4)}, + {"RES_70", BIT(5)}, + {"TBTLSX", BIT(6)}, + {} +}; + +static const struct pmc_bit_map *ext_tgl_pfear_map[] = { + /* + * Check intel_pmc_core_ids[] users of tgl_reg_map for + * a list of core SoCs using this. + */ + cnp_pfear_map, + tgl_pfear_map, + NULL +}; + +static const struct pmc_bit_map cnp_slps0_dbg0_map[] = { + {"AUDIO_D3", BIT(0)}, + {"OTG_D3", BIT(1)}, + {"XHCI_D3", BIT(2)}, + {"LPIO_D3", BIT(3)}, + {"SDX_D3", BIT(4)}, + {"SATA_D3", BIT(5)}, + {"UFS0_D3", BIT(6)}, + {"UFS1_D3", BIT(7)}, + {"EMMC_D3", BIT(8)}, + {} +}; + +static const struct pmc_bit_map cnp_slps0_dbg1_map[] = { + {"SDIO_PLL_OFF", BIT(0)}, + {"USB2_PLL_OFF", BIT(1)}, + {"AUDIO_PLL_OFF", BIT(2)}, + {"OC_PLL_OFF", BIT(3)}, + {"MAIN_PLL_OFF", BIT(4)}, + {"XOSC_OFF", BIT(5)}, + {"LPC_CLKS_GATED", BIT(6)}, + {"PCIE_CLKREQS_IDLE", BIT(7)}, + {"AUDIO_ROSC_OFF", BIT(8)}, + {"HPET_XOSC_CLK_REQ", BIT(9)}, + {"PMC_ROSC_SLOW_CLK", BIT(10)}, + {"AON2_ROSC_GATED", BIT(11)}, + {"CLKACKS_DEASSERTED", BIT(12)}, + {} +}; + +static const struct pmc_bit_map cnp_slps0_dbg2_map[] = { + {"MPHY_CORE_GATED", BIT(0)}, + {"CSME_GATED", BIT(1)}, + {"USB2_SUS_GATED", BIT(2)}, + {"DYN_FLEX_IO_IDLE", BIT(3)}, + {"GBE_NO_LINK", BIT(4)}, + {"THERM_SEN_DISABLED", BIT(5)}, + {"PCIE_LOW_POWER", BIT(6)}, + {"ISH_VNNAON_REQ_ACT", BIT(7)}, + {"ISH_VNN_REQ_ACT", BIT(8)}, + {"CNV_VNNAON_REQ_ACT", BIT(9)}, + {"CNV_VNN_REQ_ACT", BIT(10)}, + {"NPK_VNNON_REQ_ACT", BIT(11)}, + {"PMSYNC_STATE_IDLE", BIT(12)}, + {"ALST_GT_THRES", BIT(13)}, + {"PMC_ARC_PG_READY", BIT(14)}, + {} +}; + +static const struct pmc_bit_map *cnp_slps0_dbg_maps[] = { + cnp_slps0_dbg0_map, + cnp_slps0_dbg1_map, + cnp_slps0_dbg2_map, + NULL +}; + +static const struct pmc_bit_map cnp_ltr_show_map[] = { + {"SOUTHPORT_A", CNP_PMC_LTR_SPA}, + {"SOUTHPORT_B", CNP_PMC_LTR_SPB}, + {"SATA", CNP_PMC_LTR_SATA}, + {"GIGABIT_ETHERNET", CNP_PMC_LTR_GBE}, + {"XHCI", CNP_PMC_LTR_XHCI}, + {"Reserved", CNP_PMC_LTR_RESERVED}, + {"ME", CNP_PMC_LTR_ME}, + /* EVA is Enterprise Value Add, doesn't really exist on PCH */ + {"EVA", CNP_PMC_LTR_EVA}, + {"SOUTHPORT_C", CNP_PMC_LTR_SPC}, + {"HD_AUDIO", CNP_PMC_LTR_AZ}, + {"CNV", CNP_PMC_LTR_CNV}, + {"LPSS", CNP_PMC_LTR_LPSS}, + {"SOUTHPORT_D", CNP_PMC_LTR_SPD}, + {"SOUTHPORT_E", CNP_PMC_LTR_SPE}, + {"CAMERA", CNP_PMC_LTR_CAM}, + {"ESPI", CNP_PMC_LTR_ESPI}, + {"SCC", CNP_PMC_LTR_SCC}, + {"ISH", CNP_PMC_LTR_ISH}, + {"UFSX2", CNP_PMC_LTR_UFSX2}, + {"EMMC", CNP_PMC_LTR_EMMC}, + /* + * Check intel_pmc_core_ids[] users of cnp_reg_map for + * a list of core SoCs using this. + */ + {"WIGIG", ICL_PMC_LTR_WIGIG}, + {"THC0", TGL_PMC_LTR_THC0}, + {"THC1", TGL_PMC_LTR_THC1}, + /* Below two cannot be used for LTR_IGNORE */ + {"CURRENT_PLATFORM", CNP_PMC_LTR_CUR_PLT}, + {"AGGREGATED_SYSTEM", CNP_PMC_LTR_CUR_ASLT}, + {} +}; + +static const struct pmc_reg_map cnp_reg_map = { + .pfear_sts = ext_cnp_pfear_map, + .slp_s0_offset = CNP_PMC_SLP_S0_RES_COUNTER_OFFSET, + .slp_s0_res_counter_step = SPT_PMC_SLP_S0_RES_COUNTER_STEP, + .slps0_dbg_maps = cnp_slps0_dbg_maps, + .ltr_show_sts = cnp_ltr_show_map, + .msr_sts = msr_map, + .slps0_dbg_offset = CNP_PMC_SLPS0_DBG_OFFSET, + .ltr_ignore_offset = CNP_PMC_LTR_IGNORE_OFFSET, + .regmap_length = CNP_PMC_MMIO_REG_LEN, + .ppfear0_offset = CNP_PMC_HOST_PPFEAR0A, + .ppfear_buckets = CNP_PPFEAR_NUM_ENTRIES, + .pm_cfg_offset = CNP_PMC_PM_CFG_OFFSET, + .pm_read_disable_bit = CNP_PMC_READ_DISABLE_BIT, + .ltr_ignore_max = CNP_NUM_IP_IGN_ALLOWED, + .etr3_offset = ETR3_OFFSET, +}; + +static const struct pmc_reg_map icl_reg_map = { + .pfear_sts = ext_icl_pfear_map, + .slp_s0_offset = CNP_PMC_SLP_S0_RES_COUNTER_OFFSET, + .slp_s0_res_counter_step = ICL_PMC_SLP_S0_RES_COUNTER_STEP, + .slps0_dbg_maps = cnp_slps0_dbg_maps, + .ltr_show_sts = cnp_ltr_show_map, + .msr_sts = msr_map, + .slps0_dbg_offset = CNP_PMC_SLPS0_DBG_OFFSET, + .ltr_ignore_offset = CNP_PMC_LTR_IGNORE_OFFSET, + .regmap_length = CNP_PMC_MMIO_REG_LEN, + .ppfear0_offset = CNP_PMC_HOST_PPFEAR0A, + .ppfear_buckets = ICL_PPFEAR_NUM_ENTRIES, + .pm_cfg_offset = CNP_PMC_PM_CFG_OFFSET, + .pm_read_disable_bit = CNP_PMC_READ_DISABLE_BIT, + .ltr_ignore_max = ICL_NUM_IP_IGN_ALLOWED, + .etr3_offset = ETR3_OFFSET, +}; + +static const struct pmc_bit_map tgl_clocksource_status_map[] = { + {"USB2PLL_OFF_STS", BIT(18)}, + {"PCIe/USB3.1_Gen2PLL_OFF_STS", BIT(19)}, + {"PCIe_Gen3PLL_OFF_STS", BIT(20)}, + {"OPIOPLL_OFF_STS", BIT(21)}, + {"OCPLL_OFF_STS", BIT(22)}, + {"MainPLL_OFF_STS", BIT(23)}, + {"MIPIPLL_OFF_STS", BIT(24)}, + {"Fast_XTAL_Osc_OFF_STS", BIT(25)}, + {"AC_Ring_Osc_OFF_STS", BIT(26)}, + {"MC_Ring_Osc_OFF_STS", BIT(27)}, + {"SATAPLL_OFF_STS", BIT(29)}, + {"XTAL_USB2PLL_OFF_STS", BIT(31)}, + {} +}; + +static const struct pmc_bit_map tgl_power_gating_status_map[] = { + {"CSME_PG_STS", BIT(0)}, + {"SATA_PG_STS", BIT(1)}, + {"xHCI_PG_STS", BIT(2)}, + {"UFSX2_PG_STS", BIT(3)}, + {"OTG_PG_STS", BIT(5)}, + {"SPA_PG_STS", BIT(6)}, + {"SPB_PG_STS", BIT(7)}, + {"SPC_PG_STS", BIT(8)}, + {"SPD_PG_STS", BIT(9)}, + {"SPE_PG_STS", BIT(10)}, + {"SPF_PG_STS", BIT(11)}, + {"LSX_PG_STS", BIT(13)}, + {"P2SB_PG_STS", BIT(14)}, + {"PSF_PG_STS", BIT(15)}, + {"SBR_PG_STS", BIT(16)}, + {"OPIDMI_PG_STS", BIT(17)}, + {"THC0_PG_STS", BIT(18)}, + {"THC1_PG_STS", BIT(19)}, + {"GBETSN_PG_STS", BIT(20)}, + {"GBE_PG_STS", BIT(21)}, + {"LPSS_PG_STS", BIT(22)}, + {"MMP_UFSX2_PG_STS", BIT(23)}, + {"MMP_UFSX2B_PG_STS", BIT(24)}, + {"FIA_PG_STS", BIT(25)}, + {} +}; + +static const struct pmc_bit_map tgl_d3_status_map[] = { + {"ADSP_D3_STS", BIT(0)}, + {"SATA_D3_STS", BIT(1)}, + {"xHCI0_D3_STS", BIT(2)}, + {"xDCI1_D3_STS", BIT(5)}, + {"SDX_D3_STS", BIT(6)}, + {"EMMC_D3_STS", BIT(7)}, + {"IS_D3_STS", BIT(8)}, + {"THC0_D3_STS", BIT(9)}, + {"THC1_D3_STS", BIT(10)}, + {"GBE_D3_STS", BIT(11)}, + {"GBE_TSN_D3_STS", BIT(12)}, + {} +}; + +static const struct pmc_bit_map tgl_vnn_req_status_map[] = { + {"GPIO_COM0_VNN_REQ_STS", BIT(1)}, + {"GPIO_COM1_VNN_REQ_STS", BIT(2)}, + {"GPIO_COM2_VNN_REQ_STS", BIT(3)}, + {"GPIO_COM3_VNN_REQ_STS", BIT(4)}, + {"GPIO_COM4_VNN_REQ_STS", BIT(5)}, + {"GPIO_COM5_VNN_REQ_STS", BIT(6)}, + {"Audio_VNN_REQ_STS", BIT(7)}, + {"ISH_VNN_REQ_STS", BIT(8)}, + {"CNVI_VNN_REQ_STS", BIT(9)}, + {"eSPI_VNN_REQ_STS", BIT(10)}, + {"Display_VNN_REQ_STS", BIT(11)}, + {"DTS_VNN_REQ_STS", BIT(12)}, + {"SMBUS_VNN_REQ_STS", BIT(14)}, + {"CSME_VNN_REQ_STS", BIT(15)}, + {"SMLINK0_VNN_REQ_STS", BIT(16)}, + {"SMLINK1_VNN_REQ_STS", BIT(17)}, + {"CLINK_VNN_REQ_STS", BIT(20)}, + {"DCI_VNN_REQ_STS", BIT(21)}, + {"ITH_VNN_REQ_STS", BIT(22)}, + {"CSME_VNN_REQ_STS", BIT(24)}, + {"GBE_VNN_REQ_STS", BIT(25)}, + {} +}; + +static const struct pmc_bit_map tgl_vnn_misc_status_map[] = { + {"CPU_C10_REQ_STS_0", BIT(0)}, + {"PCIe_LPM_En_REQ_STS_3", BIT(3)}, + {"ITH_REQ_STS_5", BIT(5)}, + {"CNVI_REQ_STS_6", BIT(6)}, + {"ISH_REQ_STS_7", BIT(7)}, + {"USB2_SUS_PG_Sys_REQ_STS_10", BIT(10)}, + {"PCIe_Clk_REQ_STS_12", BIT(12)}, + {"MPHY_Core_DL_REQ_STS_16", BIT(16)}, + {"Break-even_En_REQ_STS_17", BIT(17)}, + {"Auto-demo_En_REQ_STS_18", BIT(18)}, + {"MPHY_SUS_REQ_STS_22", BIT(22)}, + {"xDCI_attached_REQ_STS_24", BIT(24)}, + {} +}; + +static const struct pmc_bit_map tgl_signal_status_map[] = { + {"LSX_Wake0_En_STS", BIT(0)}, + {"LSX_Wake0_Pol_STS", BIT(1)}, + {"LSX_Wake1_En_STS", BIT(2)}, + {"LSX_Wake1_Pol_STS", BIT(3)}, + {"LSX_Wake2_En_STS", BIT(4)}, + {"LSX_Wake2_Pol_STS", BIT(5)}, + {"LSX_Wake3_En_STS", BIT(6)}, + {"LSX_Wake3_Pol_STS", BIT(7)}, + {"LSX_Wake4_En_STS", BIT(8)}, + {"LSX_Wake4_Pol_STS", BIT(9)}, + {"LSX_Wake5_En_STS", BIT(10)}, + {"LSX_Wake5_Pol_STS", BIT(11)}, + {"LSX_Wake6_En_STS", BIT(12)}, + {"LSX_Wake6_Pol_STS", BIT(13)}, + {"LSX_Wake7_En_STS", BIT(14)}, + {"LSX_Wake7_Pol_STS", BIT(15)}, + {"Intel_Se_IO_Wake0_En_STS", BIT(16)}, + {"Intel_Se_IO_Wake0_Pol_STS", BIT(17)}, + {"Intel_Se_IO_Wake1_En_STS", BIT(18)}, + {"Intel_Se_IO_Wake1_Pol_STS", BIT(19)}, + {"Int_Timer_SS_Wake0_En_STS", BIT(20)}, + {"Int_Timer_SS_Wake0_Pol_STS", BIT(21)}, + {"Int_Timer_SS_Wake1_En_STS", BIT(22)}, + {"Int_Timer_SS_Wake1_Pol_STS", BIT(23)}, + {"Int_Timer_SS_Wake2_En_STS", BIT(24)}, + {"Int_Timer_SS_Wake2_Pol_STS", BIT(25)}, + {"Int_Timer_SS_Wake3_En_STS", BIT(26)}, + {"Int_Timer_SS_Wake3_Pol_STS", BIT(27)}, + {"Int_Timer_SS_Wake4_En_STS", BIT(28)}, + {"Int_Timer_SS_Wake4_Pol_STS", BIT(29)}, + {"Int_Timer_SS_Wake5_En_STS", BIT(30)}, + {"Int_Timer_SS_Wake5_Pol_STS", BIT(31)}, + {} +}; + +static const struct pmc_bit_map *tgl_lpm_maps[] = { + tgl_clocksource_status_map, + tgl_power_gating_status_map, + tgl_d3_status_map, + tgl_vnn_req_status_map, + tgl_vnn_misc_status_map, + tgl_signal_status_map, + NULL +}; + +static const struct pmc_reg_map tgl_reg_map = { + .pfear_sts = ext_tgl_pfear_map, + .slp_s0_offset = CNP_PMC_SLP_S0_RES_COUNTER_OFFSET, + .slp_s0_res_counter_step = TGL_PMC_SLP_S0_RES_COUNTER_STEP, + .ltr_show_sts = cnp_ltr_show_map, + .msr_sts = msr_map, + .ltr_ignore_offset = CNP_PMC_LTR_IGNORE_OFFSET, + .regmap_length = CNP_PMC_MMIO_REG_LEN, + .ppfear0_offset = CNP_PMC_HOST_PPFEAR0A, + .ppfear_buckets = ICL_PPFEAR_NUM_ENTRIES, + .pm_cfg_offset = CNP_PMC_PM_CFG_OFFSET, + .pm_read_disable_bit = CNP_PMC_READ_DISABLE_BIT, + .ltr_ignore_max = TGL_NUM_IP_IGN_ALLOWED, + .lpm_num_maps = TGL_LPM_NUM_MAPS, + .lpm_res_counter_step_x2 = TGL_PMC_LPM_RES_COUNTER_STEP_X2, + .lpm_sts_latch_en_offset = TGL_LPM_STS_LATCH_EN_OFFSET, + .lpm_en_offset = TGL_LPM_EN_OFFSET, + .lpm_priority_offset = TGL_LPM_PRI_OFFSET, + .lpm_residency_offset = TGL_LPM_RESIDENCY_OFFSET, + .lpm_sts = tgl_lpm_maps, + .lpm_status_offset = TGL_LPM_STATUS_OFFSET, + .lpm_live_status_offset = TGL_LPM_LIVE_STATUS_OFFSET, + .etr3_offset = ETR3_OFFSET, +}; + +static void pmc_core_get_tgl_lpm_reqs(struct platform_device *pdev) +{ + struct pmc_dev *pmcdev = platform_get_drvdata(pdev); + const int num_maps = pmcdev->map->lpm_num_maps; + u32 lpm_size = LPM_MAX_NUM_MODES * num_maps * 4; + union acpi_object *out_obj; + struct acpi_device *adev; + guid_t s0ix_dsm_guid; + u32 *lpm_req_regs, *addr; + + adev = ACPI_COMPANION(&pdev->dev); + if (!adev) + return; + + guid_parse(ACPI_S0IX_DSM_UUID, &s0ix_dsm_guid); + + out_obj = acpi_evaluate_dsm(adev->handle, &s0ix_dsm_guid, 0, + ACPI_GET_LOW_MODE_REGISTERS, NULL); + if (out_obj && out_obj->type == ACPI_TYPE_BUFFER) { + u32 size = out_obj->buffer.length; + + if (size != lpm_size) { + acpi_handle_debug(adev->handle, + "_DSM returned unexpected buffer size, have %u, expect %u\n", + size, lpm_size); + goto free_acpi_obj; + } + } else { + acpi_handle_debug(adev->handle, + "_DSM function 0 evaluation failed\n"); + goto free_acpi_obj; + } + + addr = (u32 *)out_obj->buffer.pointer; + + lpm_req_regs = devm_kzalloc(&pdev->dev, lpm_size * sizeof(u32), + GFP_KERNEL); + if (!lpm_req_regs) + goto free_acpi_obj; + + memcpy(lpm_req_regs, addr, lpm_size); + pmcdev->lpm_req_regs = lpm_req_regs; + +free_acpi_obj: + ACPI_FREE(out_obj); +} + +/* Alder Lake: PGD PFET Enable Ack Status Register(s) bitmap */ +static const struct pmc_bit_map adl_pfear_map[] = { + {"SPI/eSPI", BIT(2)}, + {"XHCI", BIT(3)}, + {"SPA", BIT(4)}, + {"SPB", BIT(5)}, + {"SPC", BIT(6)}, + {"GBE", BIT(7)}, + + {"SATA", BIT(0)}, + {"HDA_PGD0", BIT(1)}, + {"HDA_PGD1", BIT(2)}, + {"HDA_PGD2", BIT(3)}, + {"HDA_PGD3", BIT(4)}, + {"SPD", BIT(5)}, + {"LPSS", BIT(6)}, + + {"SMB", BIT(0)}, + {"ISH", BIT(1)}, + {"ITH", BIT(3)}, + + {"XDCI", BIT(1)}, + {"DCI", BIT(2)}, + {"CSE", BIT(3)}, + {"CSME_KVM", BIT(4)}, + {"CSME_PMT", BIT(5)}, + {"CSME_CLINK", BIT(6)}, + {"CSME_PTIO", BIT(7)}, + + {"CSME_USBR", BIT(0)}, + {"CSME_SUSRAM", BIT(1)}, + {"CSME_SMT1", BIT(2)}, + {"CSME_SMS2", BIT(4)}, + {"CSME_SMS1", BIT(5)}, + {"CSME_RTC", BIT(6)}, + {"CSME_PSF", BIT(7)}, + + {"CNVI", BIT(3)}, + + {"HDA_PGD4", BIT(2)}, + {"HDA_PGD5", BIT(3)}, + {"HDA_PGD6", BIT(4)}, + {} +}; + +static const struct pmc_bit_map *ext_adl_pfear_map[] = { + /* + * Check intel_pmc_core_ids[] users of cnp_reg_map for + * a list of core SoCs using this. + */ + adl_pfear_map, + NULL +}; + +static const struct pmc_bit_map adl_ltr_show_map[] = { + {"SOUTHPORT_A", CNP_PMC_LTR_SPA}, + {"SOUTHPORT_B", CNP_PMC_LTR_SPB}, + {"SATA", CNP_PMC_LTR_SATA}, + {"GIGABIT_ETHERNET", CNP_PMC_LTR_GBE}, + {"XHCI", CNP_PMC_LTR_XHCI}, + {"SOUTHPORT_F", ADL_PMC_LTR_SPF}, + {"ME", CNP_PMC_LTR_ME}, + /* EVA is Enterprise Value Add, doesn't really exist on PCH */ + {"SATA1", CNP_PMC_LTR_EVA}, + {"SOUTHPORT_C", CNP_PMC_LTR_SPC}, + {"HD_AUDIO", CNP_PMC_LTR_AZ}, + {"CNV", CNP_PMC_LTR_CNV}, + {"LPSS", CNP_PMC_LTR_LPSS}, + {"SOUTHPORT_D", CNP_PMC_LTR_SPD}, + {"SOUTHPORT_E", CNP_PMC_LTR_SPE}, + {"SATA2", CNP_PMC_LTR_CAM}, + {"ESPI", CNP_PMC_LTR_ESPI}, + {"SCC", CNP_PMC_LTR_SCC}, + {"ISH", CNP_PMC_LTR_ISH}, + {"UFSX2", CNP_PMC_LTR_UFSX2}, + {"EMMC", CNP_PMC_LTR_EMMC}, + /* + * Check intel_pmc_core_ids[] users of cnp_reg_map for + * a list of core SoCs using this. + */ + {"WIGIG", ICL_PMC_LTR_WIGIG}, + {"THC0", TGL_PMC_LTR_THC0}, + {"THC1", TGL_PMC_LTR_THC1}, + {"SOUTHPORT_G", CNP_PMC_LTR_RESERVED}, + + /* Below two cannot be used for LTR_IGNORE */ + {"CURRENT_PLATFORM", CNP_PMC_LTR_CUR_PLT}, + {"AGGREGATED_SYSTEM", CNP_PMC_LTR_CUR_ASLT}, + {} +}; + +static const struct pmc_bit_map adl_clocksource_status_map[] = { + {"CLKPART1_OFF_STS", BIT(0)}, + {"CLKPART2_OFF_STS", BIT(1)}, + {"CLKPART3_OFF_STS", BIT(2)}, + {"CLKPART4_OFF_STS", BIT(3)}, + {"CLKPART5_OFF_STS", BIT(4)}, + {"CLKPART6_OFF_STS", BIT(5)}, + {"CLKPART7_OFF_STS", BIT(6)}, + {"CLKPART8_OFF_STS", BIT(7)}, + {"PCIE0PLL_OFF_STS", BIT(10)}, + {"PCIE1PLL_OFF_STS", BIT(11)}, + {"PCIE2PLL_OFF_STS", BIT(12)}, + {"PCIE3PLL_OFF_STS", BIT(13)}, + {"PCIE4PLL_OFF_STS", BIT(14)}, + {"PCIE5PLL_OFF_STS", BIT(15)}, + {"PCIE6PLL_OFF_STS", BIT(16)}, + {"USB2PLL_OFF_STS", BIT(18)}, + {"OCPLL_OFF_STS", BIT(22)}, + {"AUDIOPLL_OFF_STS", BIT(23)}, + {"GBEPLL_OFF_STS", BIT(24)}, + {"Fast_XTAL_Osc_OFF_STS", BIT(25)}, + {"AC_Ring_Osc_OFF_STS", BIT(26)}, + {"MC_Ring_Osc_OFF_STS", BIT(27)}, + {"SATAPLL_OFF_STS", BIT(29)}, + {"USB3PLL_OFF_STS", BIT(31)}, + {} +}; + +static const struct pmc_bit_map adl_power_gating_status_0_map[] = { + {"PMC_PGD0_PG_STS", BIT(0)}, + {"DMI_PGD0_PG_STS", BIT(1)}, + {"ESPISPI_PGD0_PG_STS", BIT(2)}, + {"XHCI_PGD0_PG_STS", BIT(3)}, + {"SPA_PGD0_PG_STS", BIT(4)}, + {"SPB_PGD0_PG_STS", BIT(5)}, + {"SPC_PGD0_PG_STS", BIT(6)}, + {"GBE_PGD0_PG_STS", BIT(7)}, + {"SATA_PGD0_PG_STS", BIT(8)}, + {"DSP_PGD0_PG_STS", BIT(9)}, + {"DSP_PGD1_PG_STS", BIT(10)}, + {"DSP_PGD2_PG_STS", BIT(11)}, + {"DSP_PGD3_PG_STS", BIT(12)}, + {"SPD_PGD0_PG_STS", BIT(13)}, + {"LPSS_PGD0_PG_STS", BIT(14)}, + {"SMB_PGD0_PG_STS", BIT(16)}, + {"ISH_PGD0_PG_STS", BIT(17)}, + {"NPK_PGD0_PG_STS", BIT(19)}, + {"PECI_PGD0_PG_STS", BIT(21)}, + {"XDCI_PGD0_PG_STS", BIT(25)}, + {"EXI_PGD0_PG_STS", BIT(26)}, + {"CSE_PGD0_PG_STS", BIT(27)}, + {"KVMCC_PGD0_PG_STS", BIT(28)}, + {"PMT_PGD0_PG_STS", BIT(29)}, + {"CLINK_PGD0_PG_STS", BIT(30)}, + {"PTIO_PGD0_PG_STS", BIT(31)}, + {} +}; + +static const struct pmc_bit_map adl_power_gating_status_1_map[] = { + {"USBR0_PGD0_PG_STS", BIT(0)}, + {"SMT1_PGD0_PG_STS", BIT(2)}, + {"CSMERTC_PGD0_PG_STS", BIT(6)}, + {"CSMEPSF_PGD0_PG_STS", BIT(7)}, + {"CNVI_PGD0_PG_STS", BIT(19)}, + {"DSP_PGD4_PG_STS", BIT(26)}, + {"SPG_PGD0_PG_STS", BIT(27)}, + {"SPE_PGD0_PG_STS", BIT(28)}, + {} +}; + +static const struct pmc_bit_map adl_power_gating_status_2_map[] = { + {"THC0_PGD0_PG_STS", BIT(7)}, + {"THC1_PGD0_PG_STS", BIT(8)}, + {"SPF_PGD0_PG_STS", BIT(14)}, + {} +}; + +static const struct pmc_bit_map adl_d3_status_0_map[] = { + {"ISH_D3_STS", BIT(2)}, + {"LPSS_D3_STS", BIT(3)}, + {"XDCI_D3_STS", BIT(4)}, + {"XHCI_D3_STS", BIT(5)}, + {"SPA_D3_STS", BIT(12)}, + {"SPB_D3_STS", BIT(13)}, + {"SPC_D3_STS", BIT(14)}, + {"SPD_D3_STS", BIT(15)}, + {"SPE_D3_STS", BIT(16)}, + {"DSP_D3_STS", BIT(19)}, + {"SATA_D3_STS", BIT(20)}, + {"DMI_D3_STS", BIT(22)}, + {} +}; + +static const struct pmc_bit_map adl_d3_status_1_map[] = { + {"GBE_D3_STS", BIT(19)}, + {"CNVI_D3_STS", BIT(27)}, + {} +}; + +static const struct pmc_bit_map adl_d3_status_2_map[] = { + {"CSMERTC_D3_STS", BIT(1)}, + {"CSE_D3_STS", BIT(4)}, + {"KVMCC_D3_STS", BIT(5)}, + {"USBR0_D3_STS", BIT(6)}, + {"SMT1_D3_STS", BIT(8)}, + {"PTIO_D3_STS", BIT(16)}, + {"PMT_D3_STS", BIT(17)}, + {} +}; + +static const struct pmc_bit_map adl_d3_status_3_map[] = { + {"THC0_D3_STS", BIT(14)}, + {"THC1_D3_STS", BIT(15)}, + {} +}; + +static const struct pmc_bit_map adl_vnn_req_status_0_map[] = { + {"ISH_VNN_REQ_STS", BIT(2)}, + {"ESPISPI_VNN_REQ_STS", BIT(18)}, + {"DSP_VNN_REQ_STS", BIT(19)}, + {} +}; + +static const struct pmc_bit_map adl_vnn_req_status_1_map[] = { + {"NPK_VNN_REQ_STS", BIT(4)}, + {"EXI_VNN_REQ_STS", BIT(9)}, + {"GBE_VNN_REQ_STS", BIT(19)}, + {"SMB_VNN_REQ_STS", BIT(25)}, + {"CNVI_VNN_REQ_STS", BIT(27)}, + {} +}; + +static const struct pmc_bit_map adl_vnn_req_status_2_map[] = { + {"CSMERTC_VNN_REQ_STS", BIT(1)}, + {"CSE_VNN_REQ_STS", BIT(4)}, + {"SMT1_VNN_REQ_STS", BIT(8)}, + {"CLINK_VNN_REQ_STS", BIT(14)}, + {"GPIOCOM4_VNN_REQ_STS", BIT(20)}, + {"GPIOCOM3_VNN_REQ_STS", BIT(21)}, + {"GPIOCOM2_VNN_REQ_STS", BIT(22)}, + {"GPIOCOM1_VNN_REQ_STS", BIT(23)}, + {"GPIOCOM0_VNN_REQ_STS", BIT(24)}, + {} +}; + +static const struct pmc_bit_map adl_vnn_req_status_3_map[] = { + {"GPIOCOM5_VNN_REQ_STS", BIT(11)}, + {} +}; + +static const struct pmc_bit_map adl_vnn_misc_status_map[] = { + {"CPU_C10_REQ_STS", BIT(0)}, + {"PCIe_LPM_En_REQ_STS", BIT(3)}, + {"ITH_REQ_STS", BIT(5)}, + {"CNVI_REQ_STS", BIT(6)}, + {"ISH_REQ_STS", BIT(7)}, + {"USB2_SUS_PG_Sys_REQ_STS", BIT(10)}, + {"PCIe_Clk_REQ_STS", BIT(12)}, + {"MPHY_Core_DL_REQ_STS", BIT(16)}, + {"Break-even_En_REQ_STS", BIT(17)}, + {"MPHY_SUS_REQ_STS", BIT(22)}, + {"xDCI_attached_REQ_STS", BIT(24)}, + {} +}; + +static const struct pmc_bit_map *adl_lpm_maps[] = { + adl_clocksource_status_map, + adl_power_gating_status_0_map, + adl_power_gating_status_1_map, + adl_power_gating_status_2_map, + adl_d3_status_0_map, + adl_d3_status_1_map, + adl_d3_status_2_map, + adl_d3_status_3_map, + adl_vnn_req_status_0_map, + adl_vnn_req_status_1_map, + adl_vnn_req_status_2_map, + adl_vnn_req_status_3_map, + adl_vnn_misc_status_map, + tgl_signal_status_map, + NULL +}; + +static const struct pmc_reg_map adl_reg_map = { + .pfear_sts = ext_adl_pfear_map, + .slp_s0_offset = ADL_PMC_SLP_S0_RES_COUNTER_OFFSET, + .slp_s0_res_counter_step = TGL_PMC_SLP_S0_RES_COUNTER_STEP, + .ltr_show_sts = adl_ltr_show_map, + .msr_sts = msr_map, + .ltr_ignore_offset = CNP_PMC_LTR_IGNORE_OFFSET, + .regmap_length = CNP_PMC_MMIO_REG_LEN, + .ppfear0_offset = CNP_PMC_HOST_PPFEAR0A, + .ppfear_buckets = CNP_PPFEAR_NUM_ENTRIES, + .pm_cfg_offset = CNP_PMC_PM_CFG_OFFSET, + .pm_read_disable_bit = CNP_PMC_READ_DISABLE_BIT, + .ltr_ignore_max = ADL_NUM_IP_IGN_ALLOWED, + .lpm_num_modes = ADL_LPM_NUM_MODES, + .lpm_num_maps = ADL_LPM_NUM_MAPS, + .lpm_res_counter_step_x2 = TGL_PMC_LPM_RES_COUNTER_STEP_X2, + .etr3_offset = ETR3_OFFSET, + .lpm_sts_latch_en_offset = ADL_LPM_STATUS_LATCH_EN_OFFSET, + .lpm_priority_offset = ADL_LPM_PRI_OFFSET, + .lpm_en_offset = ADL_LPM_EN_OFFSET, + .lpm_residency_offset = ADL_LPM_RESIDENCY_OFFSET, + .lpm_sts = adl_lpm_maps, + .lpm_status_offset = ADL_LPM_STATUS_OFFSET, + .lpm_live_status_offset = ADL_LPM_LIVE_STATUS_OFFSET, +}; + +static inline u32 pmc_core_reg_read(struct pmc_dev *pmcdev, int reg_offset) +{ + return readl(pmcdev->regbase + reg_offset); +} + +static inline void pmc_core_reg_write(struct pmc_dev *pmcdev, int reg_offset, + u32 val) +{ + writel(val, pmcdev->regbase + reg_offset); +} + +static inline u64 pmc_core_adjust_slp_s0_step(struct pmc_dev *pmcdev, u32 value) +{ + /* + * ADL PCH does not have the SLP_S0 counter and LPM Residency counters are + * used as a workaround which uses 30.5 usec tick. All other client + * programs have the legacy SLP_S0 residency counter that is using the 122 + * usec tick. + */ + const int lpm_adj_x2 = pmcdev->map->lpm_res_counter_step_x2; + + if (pmcdev->map == &adl_reg_map) + return (u64)value * GET_X2_COUNTER((u64)lpm_adj_x2); + else + return (u64)value * pmcdev->map->slp_s0_res_counter_step; +} + +static int set_etr3(struct pmc_dev *pmcdev) +{ + const struct pmc_reg_map *map = pmcdev->map; + u32 reg; + int err; + + if (!map->etr3_offset) + return -EOPNOTSUPP; + + mutex_lock(&pmcdev->lock); + + /* check if CF9 is locked */ + reg = pmc_core_reg_read(pmcdev, map->etr3_offset); + if (reg & ETR3_CF9LOCK) { + err = -EACCES; + goto out_unlock; + } + + /* write CF9 global reset bit */ + reg |= ETR3_CF9GR; + pmc_core_reg_write(pmcdev, map->etr3_offset, reg); + + reg = pmc_core_reg_read(pmcdev, map->etr3_offset); + if (!(reg & ETR3_CF9GR)) { + err = -EIO; + goto out_unlock; + } + + err = 0; + +out_unlock: + mutex_unlock(&pmcdev->lock); + return err; +} +static umode_t etr3_is_visible(struct kobject *kobj, + struct attribute *attr, + int idx) +{ + struct device *dev = kobj_to_dev(kobj); + struct pmc_dev *pmcdev = dev_get_drvdata(dev); + const struct pmc_reg_map *map = pmcdev->map; + u32 reg; + + mutex_lock(&pmcdev->lock); + reg = pmc_core_reg_read(pmcdev, map->etr3_offset); + mutex_unlock(&pmcdev->lock); + + return reg & ETR3_CF9LOCK ? attr->mode & (SYSFS_PREALLOC | 0444) : attr->mode; +} + +static ssize_t etr3_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct pmc_dev *pmcdev = dev_get_drvdata(dev); + const struct pmc_reg_map *map = pmcdev->map; + u32 reg; + + if (!map->etr3_offset) + return -EOPNOTSUPP; + + mutex_lock(&pmcdev->lock); + + reg = pmc_core_reg_read(pmcdev, map->etr3_offset); + reg &= ETR3_CF9GR | ETR3_CF9LOCK; + + mutex_unlock(&pmcdev->lock); + + return sysfs_emit(buf, "0x%08x", reg); +} + +static ssize_t etr3_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct pmc_dev *pmcdev = dev_get_drvdata(dev); + int err; + u32 reg; + + err = kstrtouint(buf, 16, ®); + if (err) + return err; + + /* allow only CF9 writes */ + if (reg != ETR3_CF9GR) + return -EINVAL; + + err = set_etr3(pmcdev); + if (err) + return err; + + return len; +} +static DEVICE_ATTR_RW(etr3); + +static struct attribute *pmc_attrs[] = { + &dev_attr_etr3.attr, + NULL +}; + +static const struct attribute_group pmc_attr_group = { + .attrs = pmc_attrs, + .is_visible = etr3_is_visible, +}; + +static const struct attribute_group *pmc_dev_groups[] = { + &pmc_attr_group, + NULL +}; + +static int pmc_core_dev_state_get(void *data, u64 *val) +{ + struct pmc_dev *pmcdev = data; + const struct pmc_reg_map *map = pmcdev->map; + u32 value; + + value = pmc_core_reg_read(pmcdev, map->slp_s0_offset); + *val = pmc_core_adjust_slp_s0_step(pmcdev, value); + + return 0; +} + +DEFINE_DEBUGFS_ATTRIBUTE(pmc_core_dev_state, pmc_core_dev_state_get, NULL, "%llu\n"); + +static int pmc_core_check_read_lock_bit(struct pmc_dev *pmcdev) +{ + u32 value; + + value = pmc_core_reg_read(pmcdev, pmcdev->map->pm_cfg_offset); + return value & BIT(pmcdev->map->pm_read_disable_bit); +} + +static void pmc_core_slps0_display(struct pmc_dev *pmcdev, struct device *dev, + struct seq_file *s) +{ + const struct pmc_bit_map **maps = pmcdev->map->slps0_dbg_maps; + const struct pmc_bit_map *map; + int offset = pmcdev->map->slps0_dbg_offset; + u32 data; + + while (*maps) { + map = *maps; + data = pmc_core_reg_read(pmcdev, offset); + offset += 4; + while (map->name) { + if (dev) + dev_info(dev, "SLP_S0_DBG: %-32s\tState: %s\n", + map->name, + data & map->bit_mask ? "Yes" : "No"); + if (s) + seq_printf(s, "SLP_S0_DBG: %-32s\tState: %s\n", + map->name, + data & map->bit_mask ? "Yes" : "No"); + ++map; + } + ++maps; + } +} + +static int pmc_core_lpm_get_arr_size(const struct pmc_bit_map **maps) +{ + int idx; + + for (idx = 0; maps[idx]; idx++) + ;/* Nothing */ + + return idx; +} + +static void pmc_core_lpm_display(struct pmc_dev *pmcdev, struct device *dev, + struct seq_file *s, u32 offset, + const char *str, + const struct pmc_bit_map **maps) +{ + int index, idx, len = 32, bit_mask, arr_size; + u32 *lpm_regs; + + arr_size = pmc_core_lpm_get_arr_size(maps); + lpm_regs = kmalloc_array(arr_size, sizeof(*lpm_regs), GFP_KERNEL); + if (!lpm_regs) + return; + + for (index = 0; index < arr_size; index++) { + lpm_regs[index] = pmc_core_reg_read(pmcdev, offset); + offset += 4; + } + + for (idx = 0; idx < arr_size; idx++) { + if (dev) + dev_info(dev, "\nLPM_%s_%d:\t0x%x\n", str, idx, + lpm_regs[idx]); + if (s) + seq_printf(s, "\nLPM_%s_%d:\t0x%x\n", str, idx, + lpm_regs[idx]); + for (index = 0; maps[idx][index].name && index < len; index++) { + bit_mask = maps[idx][index].bit_mask; + if (dev) + dev_info(dev, "%-30s %-30d\n", + maps[idx][index].name, + lpm_regs[idx] & bit_mask ? 1 : 0); + if (s) + seq_printf(s, "%-30s %-30d\n", + maps[idx][index].name, + lpm_regs[idx] & bit_mask ? 1 : 0); + } + } + + kfree(lpm_regs); +} + +static bool slps0_dbg_latch; + +static inline u8 pmc_core_reg_read_byte(struct pmc_dev *pmcdev, int offset) +{ + return readb(pmcdev->regbase + offset); +} + +static void pmc_core_display_map(struct seq_file *s, int index, int idx, int ip, + u8 pf_reg, const struct pmc_bit_map **pf_map) +{ + seq_printf(s, "PCH IP: %-2d - %-32s\tState: %s\n", + ip, pf_map[idx][index].name, + pf_map[idx][index].bit_mask & pf_reg ? "Off" : "On"); +} + +static int pmc_core_ppfear_show(struct seq_file *s, void *unused) +{ + struct pmc_dev *pmcdev = s->private; + const struct pmc_bit_map **maps = pmcdev->map->pfear_sts; + u8 pf_regs[PPFEAR_MAX_NUM_ENTRIES]; + int index, iter, idx, ip = 0; + + iter = pmcdev->map->ppfear0_offset; + + for (index = 0; index < pmcdev->map->ppfear_buckets && + index < PPFEAR_MAX_NUM_ENTRIES; index++, iter++) + pf_regs[index] = pmc_core_reg_read_byte(pmcdev, iter); + + for (idx = 0; maps[idx]; idx++) { + for (index = 0; maps[idx][index].name && + index < pmcdev->map->ppfear_buckets * 8; ip++, index++) + pmc_core_display_map(s, index, idx, ip, + pf_regs[index / 8], maps); + } + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(pmc_core_ppfear); + +/* This function should return link status, 0 means ready */ +static int pmc_core_mtpmc_link_status(struct pmc_dev *pmcdev) +{ + u32 value; + + value = pmc_core_reg_read(pmcdev, SPT_PMC_PM_STS_OFFSET); + return value & BIT(SPT_PMC_MSG_FULL_STS_BIT); +} + +static int pmc_core_send_msg(struct pmc_dev *pmcdev, u32 *addr_xram) +{ + u32 dest; + int timeout; + + for (timeout = NUM_RETRIES; timeout > 0; timeout--) { + if (pmc_core_mtpmc_link_status(pmcdev) == 0) + break; + msleep(5); + } + + if (timeout <= 0 && pmc_core_mtpmc_link_status(pmcdev)) + return -EBUSY; + + dest = (*addr_xram & MTPMC_MASK) | (1U << 1); + pmc_core_reg_write(pmcdev, SPT_PMC_MTPMC_OFFSET, dest); + return 0; +} + +static int pmc_core_mphy_pg_show(struct seq_file *s, void *unused) +{ + struct pmc_dev *pmcdev = s->private; + const struct pmc_bit_map *map = pmcdev->map->mphy_sts; + u32 mphy_core_reg_low, mphy_core_reg_high; + u32 val_low, val_high; + int index, err = 0; + + if (pmcdev->pmc_xram_read_bit) { + seq_puts(s, "Access denied: please disable PMC_READ_DISABLE setting in BIOS."); + return 0; + } + + mphy_core_reg_low = (SPT_PMC_MPHY_CORE_STS_0 << 16); + mphy_core_reg_high = (SPT_PMC_MPHY_CORE_STS_1 << 16); + + mutex_lock(&pmcdev->lock); + + if (pmc_core_send_msg(pmcdev, &mphy_core_reg_low) != 0) { + err = -EBUSY; + goto out_unlock; + } + + msleep(10); + val_low = pmc_core_reg_read(pmcdev, SPT_PMC_MFPMC_OFFSET); + + if (pmc_core_send_msg(pmcdev, &mphy_core_reg_high) != 0) { + err = -EBUSY; + goto out_unlock; + } + + msleep(10); + val_high = pmc_core_reg_read(pmcdev, SPT_PMC_MFPMC_OFFSET); + + for (index = 0; index < 8 && map[index].name; index++) { + seq_printf(s, "%-32s\tState: %s\n", + map[index].name, + map[index].bit_mask & val_low ? "Not power gated" : + "Power gated"); + } + + for (index = 8; map[index].name; index++) { + seq_printf(s, "%-32s\tState: %s\n", + map[index].name, + map[index].bit_mask & val_high ? "Not power gated" : + "Power gated"); + } + +out_unlock: + mutex_unlock(&pmcdev->lock); + return err; +} +DEFINE_SHOW_ATTRIBUTE(pmc_core_mphy_pg); + +static int pmc_core_pll_show(struct seq_file *s, void *unused) +{ + struct pmc_dev *pmcdev = s->private; + const struct pmc_bit_map *map = pmcdev->map->pll_sts; + u32 mphy_common_reg, val; + int index, err = 0; + + if (pmcdev->pmc_xram_read_bit) { + seq_puts(s, "Access denied: please disable PMC_READ_DISABLE setting in BIOS."); + return 0; + } + + mphy_common_reg = (SPT_PMC_MPHY_COM_STS_0 << 16); + mutex_lock(&pmcdev->lock); + + if (pmc_core_send_msg(pmcdev, &mphy_common_reg) != 0) { + err = -EBUSY; + goto out_unlock; + } + + /* Observed PMC HW response latency for MTPMC-MFPMC is ~10 ms */ + msleep(10); + val = pmc_core_reg_read(pmcdev, SPT_PMC_MFPMC_OFFSET); + + for (index = 0; map[index].name ; index++) { + seq_printf(s, "%-32s\tState: %s\n", + map[index].name, + map[index].bit_mask & val ? "Active" : "Idle"); + } + +out_unlock: + mutex_unlock(&pmcdev->lock); + return err; +} +DEFINE_SHOW_ATTRIBUTE(pmc_core_pll); + +static int pmc_core_send_ltr_ignore(struct pmc_dev *pmcdev, u32 value) +{ + const struct pmc_reg_map *map = pmcdev->map; + u32 reg; + int err = 0; + + mutex_lock(&pmcdev->lock); + + if (value > map->ltr_ignore_max) { + err = -EINVAL; + goto out_unlock; + } + + reg = pmc_core_reg_read(pmcdev, map->ltr_ignore_offset); + reg |= BIT(value); + pmc_core_reg_write(pmcdev, map->ltr_ignore_offset, reg); + +out_unlock: + mutex_unlock(&pmcdev->lock); + + return err; +} + +static ssize_t pmc_core_ltr_ignore_write(struct file *file, + const char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct pmc_dev *pmcdev = s->private; + u32 buf_size, value; + int err; + + buf_size = min_t(u32, count, 64); + + err = kstrtou32_from_user(userbuf, buf_size, 10, &value); + if (err) + return err; + + err = pmc_core_send_ltr_ignore(pmcdev, value); + + return err == 0 ? count : err; +} + +static int pmc_core_ltr_ignore_show(struct seq_file *s, void *unused) +{ + return 0; +} + +static int pmc_core_ltr_ignore_open(struct inode *inode, struct file *file) +{ + return single_open(file, pmc_core_ltr_ignore_show, inode->i_private); +} + +static const struct file_operations pmc_core_ltr_ignore_ops = { + .open = pmc_core_ltr_ignore_open, + .read = seq_read, + .write = pmc_core_ltr_ignore_write, + .llseek = seq_lseek, + .release = single_release, +}; + +static void pmc_core_slps0_dbg_latch(struct pmc_dev *pmcdev, bool reset) +{ + const struct pmc_reg_map *map = pmcdev->map; + u32 fd; + + mutex_lock(&pmcdev->lock); + + if (!reset && !slps0_dbg_latch) + goto out_unlock; + + fd = pmc_core_reg_read(pmcdev, map->slps0_dbg_offset); + if (reset) + fd &= ~CNP_PMC_LATCH_SLPS0_EVENTS; + else + fd |= CNP_PMC_LATCH_SLPS0_EVENTS; + pmc_core_reg_write(pmcdev, map->slps0_dbg_offset, fd); + + slps0_dbg_latch = false; + +out_unlock: + mutex_unlock(&pmcdev->lock); +} + +static int pmc_core_slps0_dbg_show(struct seq_file *s, void *unused) +{ + struct pmc_dev *pmcdev = s->private; + + pmc_core_slps0_dbg_latch(pmcdev, false); + pmc_core_slps0_display(pmcdev, NULL, s); + pmc_core_slps0_dbg_latch(pmcdev, true); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(pmc_core_slps0_dbg); + +static u32 convert_ltr_scale(u32 val) +{ + /* + * As per PCIE specification supporting document + * ECN_LatencyTolnReporting_14Aug08.pdf the Latency + * Tolerance Reporting data payload is encoded in a + * 3 bit scale and 10 bit value fields. Values are + * multiplied by the indicated scale to yield an absolute time + * value, expressible in a range from 1 nanosecond to + * 2^25*(2^10-1) = 34,326,183,936 nanoseconds. + * + * scale encoding is as follows: + * + * ---------------------------------------------- + * |scale factor | Multiplier (ns) | + * ---------------------------------------------- + * | 0 | 1 | + * | 1 | 32 | + * | 2 | 1024 | + * | 3 | 32768 | + * | 4 | 1048576 | + * | 5 | 33554432 | + * | 6 | Invalid | + * | 7 | Invalid | + * ---------------------------------------------- + */ + if (val > 5) { + pr_warn("Invalid LTR scale factor.\n"); + return 0; + } + + return 1U << (5 * val); +} + +static int pmc_core_ltr_show(struct seq_file *s, void *unused) +{ + struct pmc_dev *pmcdev = s->private; + const struct pmc_bit_map *map = pmcdev->map->ltr_show_sts; + u64 decoded_snoop_ltr, decoded_non_snoop_ltr; + u32 ltr_raw_data, scale, val; + u16 snoop_ltr, nonsnoop_ltr; + int index; + + for (index = 0; map[index].name ; index++) { + decoded_snoop_ltr = decoded_non_snoop_ltr = 0; + ltr_raw_data = pmc_core_reg_read(pmcdev, + map[index].bit_mask); + snoop_ltr = ltr_raw_data & ~MTPMC_MASK; + nonsnoop_ltr = (ltr_raw_data >> 0x10) & ~MTPMC_MASK; + + if (FIELD_GET(LTR_REQ_NONSNOOP, ltr_raw_data)) { + scale = FIELD_GET(LTR_DECODED_SCALE, nonsnoop_ltr); + val = FIELD_GET(LTR_DECODED_VAL, nonsnoop_ltr); + decoded_non_snoop_ltr = val * convert_ltr_scale(scale); + } + + if (FIELD_GET(LTR_REQ_SNOOP, ltr_raw_data)) { + scale = FIELD_GET(LTR_DECODED_SCALE, snoop_ltr); + val = FIELD_GET(LTR_DECODED_VAL, snoop_ltr); + decoded_snoop_ltr = val * convert_ltr_scale(scale); + } + + seq_printf(s, "%-32s\tLTR: RAW: 0x%-16x\tNon-Snoop(ns): %-16llu\tSnoop(ns): %-16llu\n", + map[index].name, ltr_raw_data, + decoded_non_snoop_ltr, + decoded_snoop_ltr); + } + return 0; +} +DEFINE_SHOW_ATTRIBUTE(pmc_core_ltr); + +static inline u64 adjust_lpm_residency(struct pmc_dev *pmcdev, u32 offset, + const int lpm_adj_x2) +{ + u64 lpm_res = pmc_core_reg_read(pmcdev, offset); + + return GET_X2_COUNTER((u64)lpm_adj_x2 * lpm_res); +} + +static int pmc_core_substate_res_show(struct seq_file *s, void *unused) +{ + struct pmc_dev *pmcdev = s->private; + const int lpm_adj_x2 = pmcdev->map->lpm_res_counter_step_x2; + u32 offset = pmcdev->map->lpm_residency_offset; + int i, mode; + + seq_printf(s, "%-10s %-15s\n", "Substate", "Residency"); + + pmc_for_each_mode(i, mode, pmcdev) { + seq_printf(s, "%-10s %-15llu\n", pmc_lpm_modes[mode], + adjust_lpm_residency(pmcdev, offset + (4 * mode), lpm_adj_x2)); + } + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(pmc_core_substate_res); + +static int pmc_core_substate_sts_regs_show(struct seq_file *s, void *unused) +{ + struct pmc_dev *pmcdev = s->private; + const struct pmc_bit_map **maps = pmcdev->map->lpm_sts; + u32 offset = pmcdev->map->lpm_status_offset; + + pmc_core_lpm_display(pmcdev, NULL, s, offset, "STATUS", maps); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(pmc_core_substate_sts_regs); + +static int pmc_core_substate_l_sts_regs_show(struct seq_file *s, void *unused) +{ + struct pmc_dev *pmcdev = s->private; + const struct pmc_bit_map **maps = pmcdev->map->lpm_sts; + u32 offset = pmcdev->map->lpm_live_status_offset; + + pmc_core_lpm_display(pmcdev, NULL, s, offset, "LIVE_STATUS", maps); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(pmc_core_substate_l_sts_regs); + +static void pmc_core_substate_req_header_show(struct seq_file *s) +{ + struct pmc_dev *pmcdev = s->private; + int i, mode; + + seq_printf(s, "%30s |", "Element"); + pmc_for_each_mode(i, mode, pmcdev) + seq_printf(s, " %9s |", pmc_lpm_modes[mode]); + + seq_printf(s, " %9s |\n", "Status"); +} + +static int pmc_core_substate_req_regs_show(struct seq_file *s, void *unused) +{ + struct pmc_dev *pmcdev = s->private; + const struct pmc_bit_map **maps = pmcdev->map->lpm_sts; + const struct pmc_bit_map *map; + const int num_maps = pmcdev->map->lpm_num_maps; + u32 sts_offset = pmcdev->map->lpm_status_offset; + u32 *lpm_req_regs = pmcdev->lpm_req_regs; + int mp; + + /* Display the header */ + pmc_core_substate_req_header_show(s); + + /* Loop over maps */ + for (mp = 0; mp < num_maps; mp++) { + u32 req_mask = 0; + u32 lpm_status; + int mode, idx, i, len = 32; + + /* + * Capture the requirements and create a mask so that we only + * show an element if it's required for at least one of the + * enabled low power modes + */ + pmc_for_each_mode(idx, mode, pmcdev) + req_mask |= lpm_req_regs[mp + (mode * num_maps)]; + + /* Get the last latched status for this map */ + lpm_status = pmc_core_reg_read(pmcdev, sts_offset + (mp * 4)); + + /* Loop over elements in this map */ + map = maps[mp]; + for (i = 0; map[i].name && i < len; i++) { + u32 bit_mask = map[i].bit_mask; + + if (!(bit_mask & req_mask)) + /* + * Not required for any enabled states + * so don't display + */ + continue; + + /* Display the element name in the first column */ + seq_printf(s, "%30s |", map[i].name); + + /* Loop over the enabled states and display if required */ + pmc_for_each_mode(idx, mode, pmcdev) { + if (lpm_req_regs[mp + (mode * num_maps)] & bit_mask) + seq_printf(s, " %9s |", + "Required"); + else + seq_printf(s, " %9s |", " "); + } + + /* In Status column, show the last captured state of this agent */ + if (lpm_status & bit_mask) + seq_printf(s, " %9s |", "Yes"); + else + seq_printf(s, " %9s |", " "); + + seq_puts(s, "\n"); + } + } + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(pmc_core_substate_req_regs); + +static int pmc_core_lpm_latch_mode_show(struct seq_file *s, void *unused) +{ + struct pmc_dev *pmcdev = s->private; + bool c10; + u32 reg; + int idx, mode; + + reg = pmc_core_reg_read(pmcdev, pmcdev->map->lpm_sts_latch_en_offset); + if (reg & LPM_STS_LATCH_MODE) { + seq_puts(s, "c10"); + c10 = false; + } else { + seq_puts(s, "[c10]"); + c10 = true; + } + + pmc_for_each_mode(idx, mode, pmcdev) { + if ((BIT(mode) & reg) && !c10) + seq_printf(s, " [%s]", pmc_lpm_modes[mode]); + else + seq_printf(s, " %s", pmc_lpm_modes[mode]); + } + + seq_puts(s, " clear\n"); + + return 0; +} + +static ssize_t pmc_core_lpm_latch_mode_write(struct file *file, + const char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct pmc_dev *pmcdev = s->private; + bool clear = false, c10 = false; + unsigned char buf[8]; + int idx, m, mode; + u32 reg; + + if (count > sizeof(buf) - 1) + return -EINVAL; + if (copy_from_user(buf, userbuf, count)) + return -EFAULT; + buf[count] = '\0'; + + /* + * Allowed strings are: + * Any enabled substate, e.g. 'S0i2.0' + * 'c10' + * 'clear' + */ + mode = sysfs_match_string(pmc_lpm_modes, buf); + + /* Check string matches enabled mode */ + pmc_for_each_mode(idx, m, pmcdev) + if (mode == m) + break; + + if (mode != m || mode < 0) { + if (sysfs_streq(buf, "clear")) + clear = true; + else if (sysfs_streq(buf, "c10")) + c10 = true; + else + return -EINVAL; + } + + if (clear) { + mutex_lock(&pmcdev->lock); + + reg = pmc_core_reg_read(pmcdev, pmcdev->map->etr3_offset); + reg |= ETR3_CLEAR_LPM_EVENTS; + pmc_core_reg_write(pmcdev, pmcdev->map->etr3_offset, reg); + + mutex_unlock(&pmcdev->lock); + + return count; + } + + if (c10) { + mutex_lock(&pmcdev->lock); + + reg = pmc_core_reg_read(pmcdev, pmcdev->map->lpm_sts_latch_en_offset); + reg &= ~LPM_STS_LATCH_MODE; + pmc_core_reg_write(pmcdev, pmcdev->map->lpm_sts_latch_en_offset, reg); + + mutex_unlock(&pmcdev->lock); + + return count; + } + + /* + * For LPM mode latching we set the latch enable bit and selected mode + * and clear everything else. + */ + reg = LPM_STS_LATCH_MODE | BIT(mode); + mutex_lock(&pmcdev->lock); + pmc_core_reg_write(pmcdev, pmcdev->map->lpm_sts_latch_en_offset, reg); + mutex_unlock(&pmcdev->lock); + + return count; +} +DEFINE_PMC_CORE_ATTR_WRITE(pmc_core_lpm_latch_mode); + +static int pmc_core_pkgc_show(struct seq_file *s, void *unused) +{ + struct pmc_dev *pmcdev = s->private; + const struct pmc_bit_map *map = pmcdev->map->msr_sts; + u64 pcstate_count; + int index; + + for (index = 0; map[index].name ; index++) { + if (rdmsrl_safe(map[index].bit_mask, &pcstate_count)) + continue; + + pcstate_count *= 1000; + do_div(pcstate_count, tsc_khz); + seq_printf(s, "%-8s : %llu\n", map[index].name, + pcstate_count); + } + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(pmc_core_pkgc); + +static bool pmc_core_pri_verify(u32 lpm_pri, u8 *mode_order) +{ + int i, j; + + if (!lpm_pri) + return false; + /* + * Each byte contains the priority level for 2 modes (7:4 and 3:0). + * In a 32 bit register this allows for describing 8 modes. Store the + * levels and look for values out of range. + */ + for (i = 0; i < 8; i++) { + int level = lpm_pri & GENMASK(3, 0); + + if (level >= LPM_MAX_NUM_MODES) + return false; + + mode_order[i] = level; + lpm_pri >>= 4; + } + + /* Check that we have unique values */ + for (i = 0; i < LPM_MAX_NUM_MODES - 1; i++) + for (j = i + 1; j < LPM_MAX_NUM_MODES; j++) + if (mode_order[i] == mode_order[j]) + return false; + + return true; +} + +static void pmc_core_get_low_power_modes(struct platform_device *pdev) +{ + struct pmc_dev *pmcdev = platform_get_drvdata(pdev); + u8 pri_order[LPM_MAX_NUM_MODES] = LPM_DEFAULT_PRI; + u8 mode_order[LPM_MAX_NUM_MODES]; + u32 lpm_pri; + u32 lpm_en; + int mode, i, p; + + /* Use LPM Maps to indicate support for substates */ + if (!pmcdev->map->lpm_num_maps) + return; + + lpm_en = pmc_core_reg_read(pmcdev, pmcdev->map->lpm_en_offset); + pmcdev->num_lpm_modes = hweight32(lpm_en); + + /* Read 32 bit LPM_PRI register */ + lpm_pri = pmc_core_reg_read(pmcdev, pmcdev->map->lpm_priority_offset); + + + /* + * If lpm_pri value passes verification, then override the default + * modes here. Otherwise stick with the default. + */ + if (pmc_core_pri_verify(lpm_pri, mode_order)) + /* Get list of modes in priority order */ + for (mode = 0; mode < LPM_MAX_NUM_MODES; mode++) + pri_order[mode_order[mode]] = mode; + else + dev_warn(&pdev->dev, "Assuming a default substate order for this platform\n"); + + /* + * Loop through all modes from lowest to highest priority, + * and capture all enabled modes in order + */ + i = 0; + for (p = LPM_MAX_NUM_MODES - 1; p >= 0; p--) { + int mode = pri_order[p]; + + if (!(BIT(mode) & lpm_en)) + continue; + + pmcdev->lpm_en_modes[i++] = mode; + } +} + +static void pmc_core_dbgfs_unregister(struct pmc_dev *pmcdev) +{ + debugfs_remove_recursive(pmcdev->dbgfs_dir); +} + +static void pmc_core_dbgfs_register(struct pmc_dev *pmcdev) +{ + struct dentry *dir; + + dir = debugfs_create_dir("pmc_core", NULL); + pmcdev->dbgfs_dir = dir; + + debugfs_create_file("slp_s0_residency_usec", 0444, dir, pmcdev, + &pmc_core_dev_state); + + if (pmcdev->map->pfear_sts) + debugfs_create_file("pch_ip_power_gating_status", 0444, dir, + pmcdev, &pmc_core_ppfear_fops); + + debugfs_create_file("ltr_ignore", 0644, dir, pmcdev, + &pmc_core_ltr_ignore_ops); + + debugfs_create_file("ltr_show", 0444, dir, pmcdev, &pmc_core_ltr_fops); + + debugfs_create_file("package_cstate_show", 0444, dir, pmcdev, + &pmc_core_pkgc_fops); + + if (pmcdev->map->pll_sts) + debugfs_create_file("pll_status", 0444, dir, pmcdev, + &pmc_core_pll_fops); + + if (pmcdev->map->mphy_sts) + debugfs_create_file("mphy_core_lanes_power_gating_status", + 0444, dir, pmcdev, + &pmc_core_mphy_pg_fops); + + if (pmcdev->map->slps0_dbg_maps) { + debugfs_create_file("slp_s0_debug_status", 0444, + dir, pmcdev, + &pmc_core_slps0_dbg_fops); + + debugfs_create_bool("slp_s0_dbg_latch", 0644, + dir, &slps0_dbg_latch); + } + + if (pmcdev->map->lpm_en_offset) { + debugfs_create_file("substate_residencies", 0444, + pmcdev->dbgfs_dir, pmcdev, + &pmc_core_substate_res_fops); + } + + if (pmcdev->map->lpm_status_offset) { + debugfs_create_file("substate_status_registers", 0444, + pmcdev->dbgfs_dir, pmcdev, + &pmc_core_substate_sts_regs_fops); + debugfs_create_file("substate_live_status_registers", 0444, + pmcdev->dbgfs_dir, pmcdev, + &pmc_core_substate_l_sts_regs_fops); + debugfs_create_file("lpm_latch_mode", 0644, + pmcdev->dbgfs_dir, pmcdev, + &pmc_core_lpm_latch_mode_fops); + } + + if (pmcdev->lpm_req_regs) { + debugfs_create_file("substate_requirements", 0444, + pmcdev->dbgfs_dir, pmcdev, + &pmc_core_substate_req_regs_fops); + } +} + +static const struct x86_cpu_id intel_pmc_core_ids[] = { + X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_L, &spt_reg_map), + X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE, &spt_reg_map), + X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE_L, &spt_reg_map), + X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE, &spt_reg_map), + X86_MATCH_INTEL_FAM6_MODEL(CANNONLAKE_L, &cnp_reg_map), + X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_L, &icl_reg_map), + X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_NNPI, &icl_reg_map), + X86_MATCH_INTEL_FAM6_MODEL(COMETLAKE, &cnp_reg_map), + X86_MATCH_INTEL_FAM6_MODEL(COMETLAKE_L, &cnp_reg_map), + X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE_L, &tgl_reg_map), + X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE, &tgl_reg_map), + X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT, &tgl_reg_map), + X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_L, &icl_reg_map), + X86_MATCH_INTEL_FAM6_MODEL(ROCKETLAKE, &tgl_reg_map), + X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_L, &tgl_reg_map), + X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_N, &tgl_reg_map), + X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE, &adl_reg_map), + X86_MATCH_INTEL_FAM6_MODEL(RAPTORLAKE_P, &tgl_reg_map), + X86_MATCH_INTEL_FAM6_MODEL(RAPTORLAKE, &adl_reg_map), + X86_MATCH_INTEL_FAM6_MODEL(RAPTORLAKE_S, &adl_reg_map), + {} +}; + +MODULE_DEVICE_TABLE(x86cpu, intel_pmc_core_ids); + +static const struct pci_device_id pmc_pci_ids[] = { + { PCI_VDEVICE(INTEL, SPT_PMC_PCI_DEVICE_ID) }, + { } +}; + +/* + * This quirk can be used on those platforms where + * the platform BIOS enforces 24Mhz crystal to shutdown + * before PMC can assert SLP_S0#. + */ +static bool xtal_ignore; +static int quirk_xtal_ignore(const struct dmi_system_id *id) +{ + xtal_ignore = true; + return 0; +} + +static void pmc_core_xtal_ignore(struct pmc_dev *pmcdev) +{ + u32 value; + + value = pmc_core_reg_read(pmcdev, pmcdev->map->pm_vric1_offset); + /* 24MHz Crystal Shutdown Qualification Disable */ + value |= SPT_PMC_VRIC1_XTALSDQDIS; + /* Low Voltage Mode Enable */ + value &= ~SPT_PMC_VRIC1_SLPS0LVEN; + pmc_core_reg_write(pmcdev, pmcdev->map->pm_vric1_offset, value); +} + +static const struct dmi_system_id pmc_core_dmi_table[] = { + { + .callback = quirk_xtal_ignore, + .ident = "HP Elite x2 1013 G3", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Elite x2 1013 G3"), + }, + }, + {} +}; + +static void pmc_core_do_dmi_quirks(struct pmc_dev *pmcdev) +{ + dmi_check_system(pmc_core_dmi_table); + + if (xtal_ignore) + pmc_core_xtal_ignore(pmcdev); +} + +static int pmc_core_probe(struct platform_device *pdev) +{ + static bool device_initialized; + struct pmc_dev *pmcdev; + const struct x86_cpu_id *cpu_id; + u64 slp_s0_addr; + + if (device_initialized) + return -ENODEV; + + pmcdev = devm_kzalloc(&pdev->dev, sizeof(*pmcdev), GFP_KERNEL); + if (!pmcdev) + return -ENOMEM; + + platform_set_drvdata(pdev, pmcdev); + + cpu_id = x86_match_cpu(intel_pmc_core_ids); + if (!cpu_id) + return -ENODEV; + + pmcdev->map = (struct pmc_reg_map *)cpu_id->driver_data; + + /* + * Coffee Lake has CPU ID of Kaby Lake and Cannon Lake PCH. So here + * Sunrisepoint PCH regmap can't be used. Use Cannon Lake PCH regmap + * in this case. + */ + if (pmcdev->map == &spt_reg_map && !pci_dev_present(pmc_pci_ids)) + pmcdev->map = &cnp_reg_map; + + if (lpit_read_residency_count_address(&slp_s0_addr)) { + pmcdev->base_addr = PMC_BASE_ADDR_DEFAULT; + + if (page_is_ram(PHYS_PFN(pmcdev->base_addr))) + return -ENODEV; + } else { + pmcdev->base_addr = slp_s0_addr - pmcdev->map->slp_s0_offset; + } + + pmcdev->regbase = ioremap(pmcdev->base_addr, + pmcdev->map->regmap_length); + if (!pmcdev->regbase) + return -ENOMEM; + + mutex_init(&pmcdev->lock); + + pmcdev->pmc_xram_read_bit = pmc_core_check_read_lock_bit(pmcdev); + pmc_core_get_low_power_modes(pdev); + pmc_core_do_dmi_quirks(pmcdev); + + if (pmcdev->map == &tgl_reg_map) + pmc_core_get_tgl_lpm_reqs(pdev); + + /* + * On TGL and ADL, due to a hardware limitation, the GBE LTR blocks PC10 + * when a cable is attached. Tell the PMC to ignore it. + */ + if (pmcdev->map == &tgl_reg_map || pmcdev->map == &adl_reg_map) { + dev_dbg(&pdev->dev, "ignoring GBE LTR\n"); + pmc_core_send_ltr_ignore(pmcdev, 3); + } + + pmc_core_dbgfs_register(pmcdev); + + device_initialized = true; + dev_info(&pdev->dev, " initialized\n"); + + return 0; +} + +static int pmc_core_remove(struct platform_device *pdev) +{ + struct pmc_dev *pmcdev = platform_get_drvdata(pdev); + + pmc_core_dbgfs_unregister(pmcdev); + platform_set_drvdata(pdev, NULL); + mutex_destroy(&pmcdev->lock); + iounmap(pmcdev->regbase); + return 0; +} + +static bool warn_on_s0ix_failures; +module_param(warn_on_s0ix_failures, bool, 0644); +MODULE_PARM_DESC(warn_on_s0ix_failures, "Check and warn for S0ix failures"); + +static __maybe_unused int pmc_core_suspend(struct device *dev) +{ + struct pmc_dev *pmcdev = dev_get_drvdata(dev); + + pmcdev->check_counters = false; + + /* No warnings on S0ix failures */ + if (!warn_on_s0ix_failures) + return 0; + + /* Check if the syspend will actually use S0ix */ + if (pm_suspend_via_firmware()) + return 0; + + /* Save PC10 residency for checking later */ + if (rdmsrl_safe(MSR_PKG_C10_RESIDENCY, &pmcdev->pc10_counter)) + return -EIO; + + /* Save S0ix residency for checking later */ + if (pmc_core_dev_state_get(pmcdev, &pmcdev->s0ix_counter)) + return -EIO; + + pmcdev->check_counters = true; + return 0; +} + +static inline bool pmc_core_is_pc10_failed(struct pmc_dev *pmcdev) +{ + u64 pc10_counter; + + if (rdmsrl_safe(MSR_PKG_C10_RESIDENCY, &pc10_counter)) + return false; + + if (pc10_counter == pmcdev->pc10_counter) + return true; + + return false; +} + +static inline bool pmc_core_is_s0ix_failed(struct pmc_dev *pmcdev) +{ + u64 s0ix_counter; + + if (pmc_core_dev_state_get(pmcdev, &s0ix_counter)) + return false; + + if (s0ix_counter == pmcdev->s0ix_counter) + return true; + + return false; +} + +static __maybe_unused int pmc_core_resume(struct device *dev) +{ + struct pmc_dev *pmcdev = dev_get_drvdata(dev); + const struct pmc_bit_map **maps = pmcdev->map->lpm_sts; + int offset = pmcdev->map->lpm_status_offset; + + if (!pmcdev->check_counters) + return 0; + + if (!pmc_core_is_s0ix_failed(pmcdev)) + return 0; + + if (pmc_core_is_pc10_failed(pmcdev)) { + /* S0ix failed because of PC10 entry failure */ + dev_info(dev, "CPU did not enter PC10!!! (PC10 cnt=0x%llx)\n", + pmcdev->pc10_counter); + return 0; + } + + /* The real interesting case - S0ix failed - lets ask PMC why. */ + dev_warn(dev, "CPU did not enter SLP_S0!!! (S0ix cnt=%llu)\n", + pmcdev->s0ix_counter); + if (pmcdev->map->slps0_dbg_maps) + pmc_core_slps0_display(pmcdev, dev, NULL); + if (pmcdev->map->lpm_sts) + pmc_core_lpm_display(pmcdev, dev, NULL, offset, "STATUS", maps); + + return 0; +} + +static const struct dev_pm_ops pmc_core_pm_ops = { + SET_LATE_SYSTEM_SLEEP_PM_OPS(pmc_core_suspend, pmc_core_resume) +}; + +static const struct acpi_device_id pmc_core_acpi_ids[] = { + {"INT33A1", 0}, /* _HID for Intel Power Engine, _CID PNP0D80*/ + { } +}; +MODULE_DEVICE_TABLE(acpi, pmc_core_acpi_ids); + +static struct platform_driver pmc_core_driver = { + .driver = { + .name = "intel_pmc_core", + .acpi_match_table = ACPI_PTR(pmc_core_acpi_ids), + .pm = &pmc_core_pm_ops, + .dev_groups = pmc_dev_groups, + }, + .probe = pmc_core_probe, + .remove = pmc_core_remove, +}; + +module_platform_driver(pmc_core_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel PMC Core Driver"); diff --git a/drivers/platform/x86/intel/pmc/core.h b/drivers/platform/x86/intel/pmc/core.h new file mode 100644 index 000000000..7a059e02c --- /dev/null +++ b/drivers/platform/x86/intel/pmc/core.h @@ -0,0 +1,363 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Intel Core SoC Power Management Controller Header File + * + * Copyright (c) 2016, Intel Corporation. + * All Rights Reserved. + * + * Authors: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> + * Vishwanath Somayaji <vishwanath.somayaji@intel.com> + */ + +#ifndef PMC_CORE_H +#define PMC_CORE_H + +#include <linux/bits.h> + +#define PMC_BASE_ADDR_DEFAULT 0xFE000000 + +/* Sunrise Point Power Management Controller PCI Device ID */ +#define SPT_PMC_PCI_DEVICE_ID 0x9d21 +#define SPT_PMC_BASE_ADDR_OFFSET 0x48 +#define SPT_PMC_SLP_S0_RES_COUNTER_OFFSET 0x13c +#define SPT_PMC_PM_CFG_OFFSET 0x18 +#define SPT_PMC_PM_STS_OFFSET 0x1c +#define SPT_PMC_MTPMC_OFFSET 0x20 +#define SPT_PMC_MFPMC_OFFSET 0x38 +#define SPT_PMC_LTR_IGNORE_OFFSET 0x30C +#define SPT_PMC_VRIC1_OFFSET 0x31c +#define SPT_PMC_MPHY_CORE_STS_0 0x1143 +#define SPT_PMC_MPHY_CORE_STS_1 0x1142 +#define SPT_PMC_MPHY_COM_STS_0 0x1155 +#define SPT_PMC_MMIO_REG_LEN 0x1000 +#define SPT_PMC_SLP_S0_RES_COUNTER_STEP 0x68 +#define PMC_BASE_ADDR_MASK ~(SPT_PMC_MMIO_REG_LEN - 1) +#define MTPMC_MASK 0xffff0000 +#define PPFEAR_MAX_NUM_ENTRIES 12 +#define SPT_PPFEAR_NUM_ENTRIES 5 +#define SPT_PMC_READ_DISABLE_BIT 0x16 +#define SPT_PMC_MSG_FULL_STS_BIT 0x18 +#define NUM_RETRIES 100 +#define SPT_NUM_IP_IGN_ALLOWED 17 + +#define SPT_PMC_LTR_CUR_PLT 0x350 +#define SPT_PMC_LTR_CUR_ASLT 0x354 +#define SPT_PMC_LTR_SPA 0x360 +#define SPT_PMC_LTR_SPB 0x364 +#define SPT_PMC_LTR_SATA 0x368 +#define SPT_PMC_LTR_GBE 0x36C +#define SPT_PMC_LTR_XHCI 0x370 +#define SPT_PMC_LTR_RESERVED 0x374 +#define SPT_PMC_LTR_ME 0x378 +#define SPT_PMC_LTR_EVA 0x37C +#define SPT_PMC_LTR_SPC 0x380 +#define SPT_PMC_LTR_AZ 0x384 +#define SPT_PMC_LTR_LPSS 0x38C +#define SPT_PMC_LTR_CAM 0x390 +#define SPT_PMC_LTR_SPD 0x394 +#define SPT_PMC_LTR_SPE 0x398 +#define SPT_PMC_LTR_ESPI 0x39C +#define SPT_PMC_LTR_SCC 0x3A0 +#define SPT_PMC_LTR_ISH 0x3A4 + +/* Sunrise Point: PGD PFET Enable Ack Status Registers */ +enum ppfear_regs { + SPT_PMC_XRAM_PPFEAR0A = 0x590, + SPT_PMC_XRAM_PPFEAR0B, + SPT_PMC_XRAM_PPFEAR0C, + SPT_PMC_XRAM_PPFEAR0D, + SPT_PMC_XRAM_PPFEAR1A, +}; + +#define SPT_PMC_BIT_PMC BIT(0) +#define SPT_PMC_BIT_OPI BIT(1) +#define SPT_PMC_BIT_SPI BIT(2) +#define SPT_PMC_BIT_XHCI BIT(3) +#define SPT_PMC_BIT_SPA BIT(4) +#define SPT_PMC_BIT_SPB BIT(5) +#define SPT_PMC_BIT_SPC BIT(6) +#define SPT_PMC_BIT_GBE BIT(7) + +#define SPT_PMC_BIT_SATA BIT(0) +#define SPT_PMC_BIT_HDA_PGD0 BIT(1) +#define SPT_PMC_BIT_HDA_PGD1 BIT(2) +#define SPT_PMC_BIT_HDA_PGD2 BIT(3) +#define SPT_PMC_BIT_HDA_PGD3 BIT(4) +#define SPT_PMC_BIT_RSVD_0B BIT(5) +#define SPT_PMC_BIT_LPSS BIT(6) +#define SPT_PMC_BIT_LPC BIT(7) + +#define SPT_PMC_BIT_SMB BIT(0) +#define SPT_PMC_BIT_ISH BIT(1) +#define SPT_PMC_BIT_P2SB BIT(2) +#define SPT_PMC_BIT_DFX BIT(3) +#define SPT_PMC_BIT_SCC BIT(4) +#define SPT_PMC_BIT_RSVD_0C BIT(5) +#define SPT_PMC_BIT_FUSE BIT(6) +#define SPT_PMC_BIT_CAMREA BIT(7) + +#define SPT_PMC_BIT_RSVD_0D BIT(0) +#define SPT_PMC_BIT_USB3_OTG BIT(1) +#define SPT_PMC_BIT_EXI BIT(2) +#define SPT_PMC_BIT_CSE BIT(3) +#define SPT_PMC_BIT_CSME_KVM BIT(4) +#define SPT_PMC_BIT_CSME_PMT BIT(5) +#define SPT_PMC_BIT_CSME_CLINK BIT(6) +#define SPT_PMC_BIT_CSME_PTIO BIT(7) + +#define SPT_PMC_BIT_CSME_USBR BIT(0) +#define SPT_PMC_BIT_CSME_SUSRAM BIT(1) +#define SPT_PMC_BIT_CSME_SMT BIT(2) +#define SPT_PMC_BIT_RSVD_1A BIT(3) +#define SPT_PMC_BIT_CSME_SMS2 BIT(4) +#define SPT_PMC_BIT_CSME_SMS1 BIT(5) +#define SPT_PMC_BIT_CSME_RTC BIT(6) +#define SPT_PMC_BIT_CSME_PSF BIT(7) + +#define SPT_PMC_BIT_MPHY_LANE0 BIT(0) +#define SPT_PMC_BIT_MPHY_LANE1 BIT(1) +#define SPT_PMC_BIT_MPHY_LANE2 BIT(2) +#define SPT_PMC_BIT_MPHY_LANE3 BIT(3) +#define SPT_PMC_BIT_MPHY_LANE4 BIT(4) +#define SPT_PMC_BIT_MPHY_LANE5 BIT(5) +#define SPT_PMC_BIT_MPHY_LANE6 BIT(6) +#define SPT_PMC_BIT_MPHY_LANE7 BIT(7) + +#define SPT_PMC_BIT_MPHY_LANE8 BIT(0) +#define SPT_PMC_BIT_MPHY_LANE9 BIT(1) +#define SPT_PMC_BIT_MPHY_LANE10 BIT(2) +#define SPT_PMC_BIT_MPHY_LANE11 BIT(3) +#define SPT_PMC_BIT_MPHY_LANE12 BIT(4) +#define SPT_PMC_BIT_MPHY_LANE13 BIT(5) +#define SPT_PMC_BIT_MPHY_LANE14 BIT(6) +#define SPT_PMC_BIT_MPHY_LANE15 BIT(7) + +#define SPT_PMC_BIT_MPHY_CMN_LANE0 BIT(0) +#define SPT_PMC_BIT_MPHY_CMN_LANE1 BIT(1) +#define SPT_PMC_BIT_MPHY_CMN_LANE2 BIT(2) +#define SPT_PMC_BIT_MPHY_CMN_LANE3 BIT(3) + +#define SPT_PMC_VRIC1_SLPS0LVEN BIT(13) +#define SPT_PMC_VRIC1_XTALSDQDIS BIT(22) + +/* Cannonlake Power Management Controller register offsets */ +#define CNP_PMC_SLPS0_DBG_OFFSET 0x10B4 +#define CNP_PMC_PM_CFG_OFFSET 0x1818 +#define CNP_PMC_SLP_S0_RES_COUNTER_OFFSET 0x193C +#define CNP_PMC_LTR_IGNORE_OFFSET 0x1B0C +/* Cannonlake: PGD PFET Enable Ack Status Register(s) start */ +#define CNP_PMC_HOST_PPFEAR0A 0x1D90 + +#define CNP_PMC_LATCH_SLPS0_EVENTS BIT(31) + +#define CNP_PMC_MMIO_REG_LEN 0x2000 +#define CNP_PPFEAR_NUM_ENTRIES 8 +#define CNP_PMC_READ_DISABLE_BIT 22 +#define CNP_NUM_IP_IGN_ALLOWED 19 +#define CNP_PMC_LTR_CUR_PLT 0x1B50 +#define CNP_PMC_LTR_CUR_ASLT 0x1B54 +#define CNP_PMC_LTR_SPA 0x1B60 +#define CNP_PMC_LTR_SPB 0x1B64 +#define CNP_PMC_LTR_SATA 0x1B68 +#define CNP_PMC_LTR_GBE 0x1B6C +#define CNP_PMC_LTR_XHCI 0x1B70 +#define CNP_PMC_LTR_RESERVED 0x1B74 +#define CNP_PMC_LTR_ME 0x1B78 +#define CNP_PMC_LTR_EVA 0x1B7C +#define CNP_PMC_LTR_SPC 0x1B80 +#define CNP_PMC_LTR_AZ 0x1B84 +#define CNP_PMC_LTR_LPSS 0x1B8C +#define CNP_PMC_LTR_CAM 0x1B90 +#define CNP_PMC_LTR_SPD 0x1B94 +#define CNP_PMC_LTR_SPE 0x1B98 +#define CNP_PMC_LTR_ESPI 0x1B9C +#define CNP_PMC_LTR_SCC 0x1BA0 +#define CNP_PMC_LTR_ISH 0x1BA4 +#define CNP_PMC_LTR_CNV 0x1BF0 +#define CNP_PMC_LTR_EMMC 0x1BF4 +#define CNP_PMC_LTR_UFSX2 0x1BF8 + +#define LTR_DECODED_VAL GENMASK(9, 0) +#define LTR_DECODED_SCALE GENMASK(12, 10) +#define LTR_REQ_SNOOP BIT(15) +#define LTR_REQ_NONSNOOP BIT(31) + +#define ICL_PPFEAR_NUM_ENTRIES 9 +#define ICL_NUM_IP_IGN_ALLOWED 20 +#define ICL_PMC_LTR_WIGIG 0x1BFC +#define ICL_PMC_SLP_S0_RES_COUNTER_STEP 0x64 + +#define LPM_MAX_NUM_MODES 8 +#define LPM_DEFAULT_PRI { 7, 6, 2, 5, 4, 1, 3, 0 } + +#define GET_X2_COUNTER(v) ((v) >> 1) +#define LPM_STS_LATCH_MODE BIT(31) + +#define TGL_PMC_SLP_S0_RES_COUNTER_STEP 0x7A +#define TGL_PMC_LTR_THC0 0x1C04 +#define TGL_PMC_LTR_THC1 0x1C08 +#define TGL_NUM_IP_IGN_ALLOWED 23 +#define TGL_PMC_LPM_RES_COUNTER_STEP_X2 61 /* 30.5us * 2 */ + +#define ADL_PMC_LTR_SPF 0x1C00 +#define ADL_NUM_IP_IGN_ALLOWED 23 +#define ADL_PMC_SLP_S0_RES_COUNTER_OFFSET 0x1098 + +/* + * Tigerlake Power Management Controller register offsets + */ +#define TGL_LPM_STS_LATCH_EN_OFFSET 0x1C34 +#define TGL_LPM_EN_OFFSET 0x1C78 +#define TGL_LPM_RESIDENCY_OFFSET 0x1C80 + +/* Tigerlake Low Power Mode debug registers */ +#define TGL_LPM_STATUS_OFFSET 0x1C3C +#define TGL_LPM_LIVE_STATUS_OFFSET 0x1C5C +#define TGL_LPM_PRI_OFFSET 0x1C7C +#define TGL_LPM_NUM_MAPS 6 + +/* Extended Test Mode Register 3 (CNL and later) */ +#define ETR3_OFFSET 0x1048 +#define ETR3_CF9GR BIT(20) +#define ETR3_CF9LOCK BIT(31) + +/* Extended Test Mode Register LPM bits (TGL and later */ +#define ETR3_CLEAR_LPM_EVENTS BIT(28) + +/* Alder Lake Power Management Controller register offsets */ +#define ADL_LPM_EN_OFFSET 0x179C +#define ADL_LPM_RESIDENCY_OFFSET 0x17A4 +#define ADL_LPM_NUM_MODES 2 +#define ADL_LPM_NUM_MAPS 14 + +/* Alder Lake Low Power Mode debug registers */ +#define ADL_LPM_STATUS_OFFSET 0x170C +#define ADL_LPM_PRI_OFFSET 0x17A0 +#define ADL_LPM_STATUS_LATCH_EN_OFFSET 0x1704 +#define ADL_LPM_LIVE_STATUS_OFFSET 0x1764 + +static const char *pmc_lpm_modes[] = { + "S0i2.0", + "S0i2.1", + "S0i2.2", + "S0i3.0", + "S0i3.1", + "S0i3.2", + "S0i3.3", + "S0i3.4", + NULL +}; + +struct pmc_bit_map { + const char *name; + u32 bit_mask; +}; + +/** + * struct pmc_reg_map - Structure used to define parameter unique to a + PCH family + * @pfear_sts: Maps name of IP block to PPFEAR* bit + * @mphy_sts: Maps name of MPHY lane to MPHY status lane status bit + * @pll_sts: Maps name of PLL to corresponding bit status + * @slps0_dbg_maps: Array of SLP_S0_DBG* registers containing debug info + * @ltr_show_sts: Maps PCH IP Names to their MMIO register offsets + * @slp_s0_offset: PWRMBASE offset to read SLP_S0 residency + * @ltr_ignore_offset: PWRMBASE offset to read/write LTR ignore bit + * @regmap_length: Length of memory to map from PWRMBASE address to access + * @ppfear0_offset: PWRMBASE offset to to read PPFEAR* + * @ppfear_buckets: Number of 8 bits blocks to read all IP blocks from + * PPFEAR + * @pm_cfg_offset: PWRMBASE offset to PM_CFG register + * @pm_read_disable_bit: Bit index to read PMC_READ_DISABLE + * @slps0_dbg_offset: PWRMBASE offset to SLP_S0_DEBUG_REG* + * + * Each PCH has unique set of register offsets and bit indexes. This structure + * captures them to have a common implementation. + */ +struct pmc_reg_map { + const struct pmc_bit_map **pfear_sts; + const struct pmc_bit_map *mphy_sts; + const struct pmc_bit_map *pll_sts; + const struct pmc_bit_map **slps0_dbg_maps; + const struct pmc_bit_map *ltr_show_sts; + const struct pmc_bit_map *msr_sts; + const struct pmc_bit_map **lpm_sts; + const u32 slp_s0_offset; + const int slp_s0_res_counter_step; + const u32 ltr_ignore_offset; + const int regmap_length; + const u32 ppfear0_offset; + const int ppfear_buckets; + const u32 pm_cfg_offset; + const int pm_read_disable_bit; + const u32 slps0_dbg_offset; + const u32 ltr_ignore_max; + const u32 pm_vric1_offset; + /* Low Power Mode registers */ + const int lpm_num_maps; + const int lpm_num_modes; + const int lpm_res_counter_step_x2; + const u32 lpm_sts_latch_en_offset; + const u32 lpm_en_offset; + const u32 lpm_priority_offset; + const u32 lpm_residency_offset; + const u32 lpm_status_offset; + const u32 lpm_live_status_offset; + const u32 etr3_offset; +}; + +/** + * struct pmc_dev - pmc device structure + * @base_addr: contains pmc base address + * @regbase: pointer to io-remapped memory location + * @map: pointer to pmc_reg_map struct that contains platform + * specific attributes + * @dbgfs_dir: path to debugfs interface + * @pmc_xram_read_bit: flag to indicate whether PMC XRAM shadow registers + * used to read MPHY PG and PLL status are available + * @mutex_lock: mutex to complete one transcation + * @check_counters: On resume, check if counters are getting incremented + * @pc10_counter: PC10 residency counter + * @s0ix_counter: S0ix residency (step adjusted) + * @num_lpm_modes: Count of enabled modes + * @lpm_en_modes: Array of enabled modes from lowest to highest priority + * @lpm_req_regs: List of substate requirements + * + * pmc_dev contains info about power management controller device. + */ +struct pmc_dev { + u32 base_addr; + void __iomem *regbase; + const struct pmc_reg_map *map; + struct dentry *dbgfs_dir; + int pmc_xram_read_bit; + struct mutex lock; /* generic mutex lock for PMC Core */ + + bool check_counters; /* Check for counter increments on resume */ + u64 pc10_counter; + u64 s0ix_counter; + int num_lpm_modes; + int lpm_en_modes[LPM_MAX_NUM_MODES]; + u32 *lpm_req_regs; +}; + +#define pmc_for_each_mode(i, mode, pmcdev) \ + for (i = 0, mode = pmcdev->lpm_en_modes[i]; \ + i < pmcdev->num_lpm_modes; \ + i++, mode = pmcdev->lpm_en_modes[i]) + +#define DEFINE_PMC_CORE_ATTR_WRITE(__name) \ +static int __name ## _open(struct inode *inode, struct file *file) \ +{ \ + return single_open(file, __name ## _show, inode->i_private); \ +} \ + \ +static const struct file_operations __name ## _fops = { \ + .owner = THIS_MODULE, \ + .open = __name ## _open, \ + .read = seq_read, \ + .write = __name ## _write, \ + .release = single_release, \ +} + +#endif /* PMC_CORE_H */ diff --git a/drivers/platform/x86/intel/pmc/pltdrv.c b/drivers/platform/x86/intel/pmc/pltdrv.c new file mode 100644 index 000000000..ddfba38c2 --- /dev/null +++ b/drivers/platform/x86/intel/pmc/pltdrv.c @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* + * Intel PMC Core platform init + * Copyright (c) 2019, Google Inc. + * Author - Rajat Jain + * + * This code instantiates platform devices for intel_pmc_core driver, only + * on supported platforms that may not have the ACPI devices in the ACPI tables. + * No new platforms should be added here, because we expect that new platforms + * should all have the ACPI device, which is the preferred way of enumeration. + */ + +#include <linux/acpi.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include <asm/cpu_device_id.h> +#include <asm/intel-family.h> + +#include <xen/xen.h> + +static void intel_pmc_core_release(struct device *dev) +{ + kfree(dev); +} + +static struct platform_device *pmc_core_device; + +/* + * intel_pmc_core_platform_ids is the list of platforms where we want to + * instantiate the platform_device if not already instantiated. This is + * different than intel_pmc_core_ids in intel_pmc_core.c which is the + * list of platforms that the driver supports for pmc_core device. The + * other list may grow, but this list should not. + */ +static const struct x86_cpu_id intel_pmc_core_platform_ids[] = { + X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_L, &pmc_core_device), + X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE, &pmc_core_device), + X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE_L, &pmc_core_device), + X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE, &pmc_core_device), + X86_MATCH_INTEL_FAM6_MODEL(CANNONLAKE_L, &pmc_core_device), + X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_L, &pmc_core_device), + X86_MATCH_INTEL_FAM6_MODEL(COMETLAKE, &pmc_core_device), + X86_MATCH_INTEL_FAM6_MODEL(COMETLAKE_L, &pmc_core_device), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, intel_pmc_core_platform_ids); + +static int __init pmc_core_platform_init(void) +{ + int retval; + + /* Skip creating the platform device if ACPI already has a device */ + if (acpi_dev_present("INT33A1", NULL, -1)) + return -ENODEV; + + /* + * Skip forcefully attaching the device for VMs. Make an exception for + * Xen dom0, which does have full hardware access. + */ + if (cpu_feature_enabled(X86_FEATURE_HYPERVISOR) && !xen_initial_domain()) + return -ENODEV; + + if (!x86_match_cpu(intel_pmc_core_platform_ids)) + return -ENODEV; + + pmc_core_device = kzalloc(sizeof(*pmc_core_device), GFP_KERNEL); + if (!pmc_core_device) + return -ENOMEM; + + pmc_core_device->name = "intel_pmc_core"; + pmc_core_device->dev.release = intel_pmc_core_release; + + retval = platform_device_register(pmc_core_device); + if (retval) + platform_device_put(pmc_core_device); + + return retval; +} + +static void __exit pmc_core_platform_exit(void) +{ + platform_device_unregister(pmc_core_device); +} + +module_init(pmc_core_platform_init); +module_exit(pmc_core_platform_exit); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/platform/x86/intel/pmt/Kconfig b/drivers/platform/x86/intel/pmt/Kconfig new file mode 100644 index 000000000..e916fc966 --- /dev/null +++ b/drivers/platform/x86/intel/pmt/Kconfig @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Intel Platform Monitoring Technology drivers +# + +config INTEL_PMT_CLASS + tristate + help + The Intel Platform Monitoring Technology (PMT) class driver provides + the basic sysfs interface and file hierarchy used by PMT devices. + + For more information, see: + <file:Documentation/ABI/testing/sysfs-class-intel_pmt> + + To compile this driver as a module, choose M here: the module + will be called intel_pmt_class. + +config INTEL_PMT_TELEMETRY + tristate "Intel Platform Monitoring Technology (PMT) Telemetry driver" + depends on INTEL_VSEC + select INTEL_PMT_CLASS + help + The Intel Platform Monitory Technology (PMT) Telemetry driver provides + access to hardware telemetry metrics on devices that support the + feature. + + To compile this driver as a module, choose M here: the module + will be called intel_pmt_telemetry. + +config INTEL_PMT_CRASHLOG + tristate "Intel Platform Monitoring Technology (PMT) Crashlog driver" + depends on INTEL_VSEC + select INTEL_PMT_CLASS + help + The Intel Platform Monitoring Technology (PMT) crashlog driver provides + access to hardware crashlog capabilities on devices that support the + feature. + + To compile this driver as a module, choose M here: the module + will be called intel_pmt_crashlog. diff --git a/drivers/platform/x86/intel/pmt/Makefile b/drivers/platform/x86/intel/pmt/Makefile new file mode 100644 index 000000000..279e158c7 --- /dev/null +++ b/drivers/platform/x86/intel/pmt/Makefile @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for linux/drivers/platform/x86/intel/pmt +# Intel Platform Monitoring Technology Drivers +# + +obj-$(CONFIG_INTEL_PMT_CLASS) += pmt_class.o +pmt_class-y := class.o +obj-$(CONFIG_INTEL_PMT_TELEMETRY) += pmt_telemetry.o +pmt_telemetry-y := telemetry.o +obj-$(CONFIG_INTEL_PMT_CRASHLOG) += pmt_crashlog.o +pmt_crashlog-y := crashlog.o diff --git a/drivers/platform/x86/intel/pmt/class.c b/drivers/platform/x86/intel/pmt/class.c new file mode 100644 index 000000000..46598dcb6 --- /dev/null +++ b/drivers/platform/x86/intel/pmt/class.c @@ -0,0 +1,363 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel Platform Monitory Technology Telemetry driver + * + * Copyright (c) 2020, Intel Corporation. + * All Rights Reserved. + * + * Author: "Alexander Duyck" <alexander.h.duyck@linux.intel.com> + */ + +#include <linux/kernel.h> +#include <linux/io-64-nonatomic-lo-hi.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/pci.h> + +#include "../vsec.h" +#include "class.h" + +#define PMT_XA_START 0 +#define PMT_XA_MAX INT_MAX +#define PMT_XA_LIMIT XA_LIMIT(PMT_XA_START, PMT_XA_MAX) +#define GUID_SPR_PUNIT 0x9956f43f + +bool intel_pmt_is_early_client_hw(struct device *dev) +{ + struct intel_vsec_device *ivdev = dev_to_ivdev(dev); + + /* + * Early implementations of PMT on client platforms have some + * differences from the server platforms (which use the Out Of Band + * Management Services Module OOBMSM). + */ + return !!(ivdev->info->quirks & VSEC_QUIRK_EARLY_HW); +} +EXPORT_SYMBOL_GPL(intel_pmt_is_early_client_hw); + +static inline int +pmt_memcpy64_fromio(void *to, const u64 __iomem *from, size_t count) +{ + int i, remain; + u64 *buf = to; + + if (!IS_ALIGNED((unsigned long)from, 8)) + return -EFAULT; + + for (i = 0; i < count/8; i++) + buf[i] = readq(&from[i]); + + /* Copy any remaining bytes */ + remain = count % 8; + if (remain) { + u64 tmp = readq(&from[i]); + + memcpy(&buf[i], &tmp, remain); + } + + return count; +} + +/* + * sysfs + */ +static ssize_t +intel_pmt_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, char *buf, loff_t off, + size_t count) +{ + struct intel_pmt_entry *entry = container_of(attr, + struct intel_pmt_entry, + pmt_bin_attr); + + if (off < 0) + return -EINVAL; + + if (off >= entry->size) + return 0; + + if (count > entry->size - off) + count = entry->size - off; + + if (entry->guid == GUID_SPR_PUNIT) + /* PUNIT on SPR only supports aligned 64-bit read */ + count = pmt_memcpy64_fromio(buf, entry->base + off, count); + else + memcpy_fromio(buf, entry->base + off, count); + + return count; +} + +static int +intel_pmt_mmap(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, struct vm_area_struct *vma) +{ + struct intel_pmt_entry *entry = container_of(attr, + struct intel_pmt_entry, + pmt_bin_attr); + unsigned long vsize = vma->vm_end - vma->vm_start; + struct device *dev = kobj_to_dev(kobj); + unsigned long phys = entry->base_addr; + unsigned long pfn = PFN_DOWN(phys); + unsigned long psize; + + if (vma->vm_flags & (VM_WRITE | VM_MAYWRITE)) + return -EROFS; + + psize = (PFN_UP(entry->base_addr + entry->size) - pfn) * PAGE_SIZE; + if (vsize > psize) { + dev_err(dev, "Requested mmap size is too large\n"); + return -EINVAL; + } + + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + if (io_remap_pfn_range(vma, vma->vm_start, pfn, + vsize, vma->vm_page_prot)) + return -EAGAIN; + + return 0; +} + +static ssize_t +guid_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct intel_pmt_entry *entry = dev_get_drvdata(dev); + + return sprintf(buf, "0x%x\n", entry->guid); +} +static DEVICE_ATTR_RO(guid); + +static ssize_t size_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct intel_pmt_entry *entry = dev_get_drvdata(dev); + + return sprintf(buf, "%zu\n", entry->size); +} +static DEVICE_ATTR_RO(size); + +static ssize_t +offset_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct intel_pmt_entry *entry = dev_get_drvdata(dev); + + return sprintf(buf, "%lu\n", offset_in_page(entry->base_addr)); +} +static DEVICE_ATTR_RO(offset); + +static struct attribute *intel_pmt_attrs[] = { + &dev_attr_guid.attr, + &dev_attr_size.attr, + &dev_attr_offset.attr, + NULL +}; +ATTRIBUTE_GROUPS(intel_pmt); + +static struct class intel_pmt_class = { + .name = "intel_pmt", + .owner = THIS_MODULE, + .dev_groups = intel_pmt_groups, +}; + +static int intel_pmt_populate_entry(struct intel_pmt_entry *entry, + struct intel_pmt_header *header, + struct device *dev, + struct resource *disc_res) +{ + struct pci_dev *pci_dev = to_pci_dev(dev->parent); + u8 bir; + + /* + * The base offset should always be 8 byte aligned. + * + * For non-local access types the lower 3 bits of base offset + * contains the index of the base address register where the + * telemetry can be found. + */ + bir = GET_BIR(header->base_offset); + + /* Local access and BARID only for now */ + switch (header->access_type) { + case ACCESS_LOCAL: + if (bir) { + dev_err(dev, + "Unsupported BAR index %d for access type %d\n", + bir, header->access_type); + return -EINVAL; + } + /* + * For access_type LOCAL, the base address is as follows: + * base address = end of discovery region + base offset + */ + entry->base_addr = disc_res->end + 1 + header->base_offset; + + /* + * Some hardware use a different calculation for the base address + * when access_type == ACCESS_LOCAL. On the these systems + * ACCCESS_LOCAL refers to an address in the same BAR as the + * header but at a fixed offset. But as the header address was + * supplied to the driver, we don't know which BAR it was in. + * So search for the bar whose range includes the header address. + */ + if (intel_pmt_is_early_client_hw(dev)) { + int i; + + entry->base_addr = 0; + for (i = 0; i < 6; i++) + if (disc_res->start >= pci_resource_start(pci_dev, i) && + (disc_res->start <= pci_resource_end(pci_dev, i))) { + entry->base_addr = pci_resource_start(pci_dev, i) + + header->base_offset; + break; + } + if (!entry->base_addr) + return -EINVAL; + } + + break; + case ACCESS_BARID: + /* + * If another BAR was specified then the base offset + * represents the offset within that BAR. SO retrieve the + * address from the parent PCI device and add offset. + */ + entry->base_addr = pci_resource_start(pci_dev, bir) + + GET_ADDRESS(header->base_offset); + break; + default: + dev_err(dev, "Unsupported access type %d\n", + header->access_type); + return -EINVAL; + } + + entry->guid = header->guid; + entry->size = header->size; + + return 0; +} + +static int intel_pmt_dev_register(struct intel_pmt_entry *entry, + struct intel_pmt_namespace *ns, + struct device *parent) +{ + struct resource res = {0}; + struct device *dev; + int ret; + + ret = xa_alloc(ns->xa, &entry->devid, entry, PMT_XA_LIMIT, GFP_KERNEL); + if (ret) + return ret; + + dev = device_create(&intel_pmt_class, parent, MKDEV(0, 0), entry, + "%s%d", ns->name, entry->devid); + + if (IS_ERR(dev)) { + dev_err(parent, "Could not create %s%d device node\n", + ns->name, entry->devid); + ret = PTR_ERR(dev); + goto fail_dev_create; + } + + entry->kobj = &dev->kobj; + + if (ns->attr_grp) { + ret = sysfs_create_group(entry->kobj, ns->attr_grp); + if (ret) + goto fail_sysfs; + } + + /* if size is 0 assume no data buffer, so no file needed */ + if (!entry->size) + return 0; + + res.start = entry->base_addr; + res.end = res.start + entry->size - 1; + res.flags = IORESOURCE_MEM; + + entry->base = devm_ioremap_resource(dev, &res); + if (IS_ERR(entry->base)) { + ret = PTR_ERR(entry->base); + goto fail_ioremap; + } + + sysfs_bin_attr_init(&entry->pmt_bin_attr); + entry->pmt_bin_attr.attr.name = ns->name; + entry->pmt_bin_attr.attr.mode = 0440; + entry->pmt_bin_attr.mmap = intel_pmt_mmap; + entry->pmt_bin_attr.read = intel_pmt_read; + entry->pmt_bin_attr.size = entry->size; + + ret = sysfs_create_bin_file(&dev->kobj, &entry->pmt_bin_attr); + if (!ret) + return 0; + +fail_ioremap: + if (ns->attr_grp) + sysfs_remove_group(entry->kobj, ns->attr_grp); +fail_sysfs: + device_unregister(dev); +fail_dev_create: + xa_erase(ns->xa, entry->devid); + + return ret; +} + +int intel_pmt_dev_create(struct intel_pmt_entry *entry, struct intel_pmt_namespace *ns, + struct intel_vsec_device *intel_vsec_dev, int idx) +{ + struct device *dev = &intel_vsec_dev->auxdev.dev; + struct intel_pmt_header header; + struct resource *disc_res; + int ret; + + disc_res = &intel_vsec_dev->resource[idx]; + + entry->disc_table = devm_ioremap_resource(dev, disc_res); + if (IS_ERR(entry->disc_table)) + return PTR_ERR(entry->disc_table); + + ret = ns->pmt_header_decode(entry, &header, dev); + if (ret) + return ret; + + ret = intel_pmt_populate_entry(entry, &header, dev, disc_res); + if (ret) + return ret; + + return intel_pmt_dev_register(entry, ns, dev); + +} +EXPORT_SYMBOL_GPL(intel_pmt_dev_create); + +void intel_pmt_dev_destroy(struct intel_pmt_entry *entry, + struct intel_pmt_namespace *ns) +{ + struct device *dev = kobj_to_dev(entry->kobj); + + if (entry->size) + sysfs_remove_bin_file(entry->kobj, &entry->pmt_bin_attr); + + if (ns->attr_grp) + sysfs_remove_group(entry->kobj, ns->attr_grp); + + device_unregister(dev); + xa_erase(ns->xa, entry->devid); +} +EXPORT_SYMBOL_GPL(intel_pmt_dev_destroy); + +static int __init pmt_class_init(void) +{ + return class_register(&intel_pmt_class); +} + +static void __exit pmt_class_exit(void) +{ + class_unregister(&intel_pmt_class); +} + +module_init(pmt_class_init); +module_exit(pmt_class_exit); + +MODULE_AUTHOR("Alexander Duyck <alexander.h.duyck@linux.intel.com>"); +MODULE_DESCRIPTION("Intel PMT Class driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/platform/x86/intel/pmt/class.h b/drivers/platform/x86/intel/pmt/class.h new file mode 100644 index 000000000..db11d5886 --- /dev/null +++ b/drivers/platform/x86/intel/pmt/class.h @@ -0,0 +1,54 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _INTEL_PMT_CLASS_H +#define _INTEL_PMT_CLASS_H + +#include <linux/xarray.h> +#include <linux/types.h> +#include <linux/bits.h> +#include <linux/err.h> +#include <linux/io.h> + +#include "../vsec.h" + +/* PMT access types */ +#define ACCESS_BARID 2 +#define ACCESS_LOCAL 3 + +/* PMT discovery base address/offset register layout */ +#define GET_BIR(v) ((v) & GENMASK(2, 0)) +#define GET_ADDRESS(v) ((v) & GENMASK(31, 3)) + +struct intel_pmt_entry { + struct bin_attribute pmt_bin_attr; + struct kobject *kobj; + void __iomem *disc_table; + void __iomem *base; + unsigned long base_addr; + size_t size; + u32 guid; + int devid; +}; + +struct intel_pmt_header { + u32 base_offset; + u32 size; + u32 guid; + u8 access_type; +}; + +struct intel_pmt_namespace { + const char *name; + struct xarray *xa; + const struct attribute_group *attr_grp; + int (*pmt_header_decode)(struct intel_pmt_entry *entry, + struct intel_pmt_header *header, + struct device *dev); +}; + +bool intel_pmt_is_early_client_hw(struct device *dev); +int intel_pmt_dev_create(struct intel_pmt_entry *entry, + struct intel_pmt_namespace *ns, + struct intel_vsec_device *dev, int idx); +void intel_pmt_dev_destroy(struct intel_pmt_entry *entry, + struct intel_pmt_namespace *ns); +#endif diff --git a/drivers/platform/x86/intel/pmt/crashlog.c b/drivers/platform/x86/intel/pmt/crashlog.c new file mode 100644 index 000000000..ace1239bc --- /dev/null +++ b/drivers/platform/x86/intel/pmt/crashlog.c @@ -0,0 +1,330 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel Platform Monitoring Technology Crashlog driver + * + * Copyright (c) 2020, Intel Corporation. + * All Rights Reserved. + * + * Author: "Alexander Duyck" <alexander.h.duyck@linux.intel.com> + */ + +#include <linux/auxiliary_bus.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/uaccess.h> +#include <linux/overflow.h> + +#include "../vsec.h" +#include "class.h" + +/* Crashlog discovery header types */ +#define CRASH_TYPE_OOBMSM 1 + +/* Control Flags */ +#define CRASHLOG_FLAG_DISABLE BIT(28) + +/* + * Bits 29 and 30 control the state of bit 31. + * + * Bit 29 will clear bit 31, if set, allowing a new crashlog to be captured. + * Bit 30 will immediately trigger a crashlog to be generated, setting bit 31. + * Bit 31 is the read-only status with a 1 indicating log is complete. + */ +#define CRASHLOG_FLAG_TRIGGER_CLEAR BIT(29) +#define CRASHLOG_FLAG_TRIGGER_EXECUTE BIT(30) +#define CRASHLOG_FLAG_TRIGGER_COMPLETE BIT(31) +#define CRASHLOG_FLAG_TRIGGER_MASK GENMASK(31, 28) + +/* Crashlog Discovery Header */ +#define CONTROL_OFFSET 0x0 +#define GUID_OFFSET 0x4 +#define BASE_OFFSET 0x8 +#define SIZE_OFFSET 0xC +#define GET_ACCESS(v) ((v) & GENMASK(3, 0)) +#define GET_TYPE(v) (((v) & GENMASK(7, 4)) >> 4) +#define GET_VERSION(v) (((v) & GENMASK(19, 16)) >> 16) +/* size is in bytes */ +#define GET_SIZE(v) ((v) * sizeof(u32)) + +struct crashlog_entry { + /* entry must be first member of struct */ + struct intel_pmt_entry entry; + struct mutex control_mutex; +}; + +struct pmt_crashlog_priv { + int num_entries; + struct crashlog_entry entry[]; +}; + +/* + * I/O + */ +static bool pmt_crashlog_complete(struct intel_pmt_entry *entry) +{ + u32 control = readl(entry->disc_table + CONTROL_OFFSET); + + /* return current value of the crashlog complete flag */ + return !!(control & CRASHLOG_FLAG_TRIGGER_COMPLETE); +} + +static bool pmt_crashlog_disabled(struct intel_pmt_entry *entry) +{ + u32 control = readl(entry->disc_table + CONTROL_OFFSET); + + /* return current value of the crashlog disabled flag */ + return !!(control & CRASHLOG_FLAG_DISABLE); +} + +static bool pmt_crashlog_supported(struct intel_pmt_entry *entry) +{ + u32 discovery_header = readl(entry->disc_table + CONTROL_OFFSET); + u32 crash_type, version; + + crash_type = GET_TYPE(discovery_header); + version = GET_VERSION(discovery_header); + + /* + * Currently we only recognize OOBMSM version 0 devices. + * We can ignore all other crashlog devices in the system. + */ + return crash_type == CRASH_TYPE_OOBMSM && version == 0; +} + +static void pmt_crashlog_set_disable(struct intel_pmt_entry *entry, + bool disable) +{ + u32 control = readl(entry->disc_table + CONTROL_OFFSET); + + /* clear trigger bits so we are only modifying disable flag */ + control &= ~CRASHLOG_FLAG_TRIGGER_MASK; + + if (disable) + control |= CRASHLOG_FLAG_DISABLE; + else + control &= ~CRASHLOG_FLAG_DISABLE; + + writel(control, entry->disc_table + CONTROL_OFFSET); +} + +static void pmt_crashlog_set_clear(struct intel_pmt_entry *entry) +{ + u32 control = readl(entry->disc_table + CONTROL_OFFSET); + + control &= ~CRASHLOG_FLAG_TRIGGER_MASK; + control |= CRASHLOG_FLAG_TRIGGER_CLEAR; + + writel(control, entry->disc_table + CONTROL_OFFSET); +} + +static void pmt_crashlog_set_execute(struct intel_pmt_entry *entry) +{ + u32 control = readl(entry->disc_table + CONTROL_OFFSET); + + control &= ~CRASHLOG_FLAG_TRIGGER_MASK; + control |= CRASHLOG_FLAG_TRIGGER_EXECUTE; + + writel(control, entry->disc_table + CONTROL_OFFSET); +} + +/* + * sysfs + */ +static ssize_t +enable_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct intel_pmt_entry *entry = dev_get_drvdata(dev); + int enabled = !pmt_crashlog_disabled(entry); + + return sprintf(buf, "%d\n", enabled); +} + +static ssize_t +enable_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct crashlog_entry *entry; + bool enabled; + int result; + + entry = dev_get_drvdata(dev); + + result = kstrtobool(buf, &enabled); + if (result) + return result; + + mutex_lock(&entry->control_mutex); + pmt_crashlog_set_disable(&entry->entry, !enabled); + mutex_unlock(&entry->control_mutex); + + return count; +} +static DEVICE_ATTR_RW(enable); + +static ssize_t +trigger_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct intel_pmt_entry *entry; + int trigger; + + entry = dev_get_drvdata(dev); + trigger = pmt_crashlog_complete(entry); + + return sprintf(buf, "%d\n", trigger); +} + +static ssize_t +trigger_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct crashlog_entry *entry; + bool trigger; + int result; + + entry = dev_get_drvdata(dev); + + result = kstrtobool(buf, &trigger); + if (result) + return result; + + mutex_lock(&entry->control_mutex); + + if (!trigger) { + pmt_crashlog_set_clear(&entry->entry); + } else if (pmt_crashlog_complete(&entry->entry)) { + /* we cannot trigger a new crash if one is still pending */ + result = -EEXIST; + goto err; + } else if (pmt_crashlog_disabled(&entry->entry)) { + /* if device is currently disabled, return busy */ + result = -EBUSY; + goto err; + } else { + pmt_crashlog_set_execute(&entry->entry); + } + + result = count; +err: + mutex_unlock(&entry->control_mutex); + return result; +} +static DEVICE_ATTR_RW(trigger); + +static struct attribute *pmt_crashlog_attrs[] = { + &dev_attr_enable.attr, + &dev_attr_trigger.attr, + NULL +}; + +static const struct attribute_group pmt_crashlog_group = { + .attrs = pmt_crashlog_attrs, +}; + +static int pmt_crashlog_header_decode(struct intel_pmt_entry *entry, + struct intel_pmt_header *header, + struct device *dev) +{ + void __iomem *disc_table = entry->disc_table; + struct crashlog_entry *crashlog; + + if (!pmt_crashlog_supported(entry)) + return 1; + + /* initialize control mutex */ + crashlog = container_of(entry, struct crashlog_entry, entry); + mutex_init(&crashlog->control_mutex); + + header->access_type = GET_ACCESS(readl(disc_table)); + header->guid = readl(disc_table + GUID_OFFSET); + header->base_offset = readl(disc_table + BASE_OFFSET); + + /* Size is measured in DWORDS, but accessor returns bytes */ + header->size = GET_SIZE(readl(disc_table + SIZE_OFFSET)); + + return 0; +} + +static DEFINE_XARRAY_ALLOC(crashlog_array); +static struct intel_pmt_namespace pmt_crashlog_ns = { + .name = "crashlog", + .xa = &crashlog_array, + .attr_grp = &pmt_crashlog_group, + .pmt_header_decode = pmt_crashlog_header_decode, +}; + +/* + * initialization + */ +static void pmt_crashlog_remove(struct auxiliary_device *auxdev) +{ + struct pmt_crashlog_priv *priv = auxiliary_get_drvdata(auxdev); + int i; + + for (i = 0; i < priv->num_entries; i++) + intel_pmt_dev_destroy(&priv->entry[i].entry, &pmt_crashlog_ns); +} + +static int pmt_crashlog_probe(struct auxiliary_device *auxdev, + const struct auxiliary_device_id *id) +{ + struct intel_vsec_device *intel_vsec_dev = auxdev_to_ivdev(auxdev); + struct pmt_crashlog_priv *priv; + size_t size; + int i, ret; + + size = struct_size(priv, entry, intel_vsec_dev->num_resources); + priv = devm_kzalloc(&auxdev->dev, size, GFP_KERNEL); + if (!priv) + return -ENOMEM; + + auxiliary_set_drvdata(auxdev, priv); + + for (i = 0; i < intel_vsec_dev->num_resources; i++) { + struct intel_pmt_entry *entry = &priv->entry[priv->num_entries].entry; + + ret = intel_pmt_dev_create(entry, &pmt_crashlog_ns, intel_vsec_dev, i); + if (ret < 0) + goto abort_probe; + if (ret) + continue; + + priv->num_entries++; + } + + return 0; +abort_probe: + pmt_crashlog_remove(auxdev); + return ret; +} + +static const struct auxiliary_device_id pmt_crashlog_id_table[] = { + { .name = "intel_vsec.crashlog" }, + {} +}; +MODULE_DEVICE_TABLE(auxiliary, pmt_crashlog_id_table); + +static struct auxiliary_driver pmt_crashlog_aux_driver = { + .id_table = pmt_crashlog_id_table, + .remove = pmt_crashlog_remove, + .probe = pmt_crashlog_probe, +}; + +static int __init pmt_crashlog_init(void) +{ + return auxiliary_driver_register(&pmt_crashlog_aux_driver); +} + +static void __exit pmt_crashlog_exit(void) +{ + auxiliary_driver_unregister(&pmt_crashlog_aux_driver); + xa_destroy(&crashlog_array); +} + +module_init(pmt_crashlog_init); +module_exit(pmt_crashlog_exit); + +MODULE_AUTHOR("Alexander Duyck <alexander.h.duyck@linux.intel.com>"); +MODULE_DESCRIPTION("Intel PMT Crashlog driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/platform/x86/intel/pmt/telemetry.c b/drivers/platform/x86/intel/pmt/telemetry.c new file mode 100644 index 000000000..5e4009c05 --- /dev/null +++ b/drivers/platform/x86/intel/pmt/telemetry.c @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel Platform Monitory Technology Telemetry driver + * + * Copyright (c) 2020, Intel Corporation. + * All Rights Reserved. + * + * Author: "David E. Box" <david.e.box@linux.intel.com> + */ + +#include <linux/auxiliary_bus.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/uaccess.h> +#include <linux/overflow.h> + +#include "../vsec.h" +#include "class.h" + +#define TELEM_SIZE_OFFSET 0x0 +#define TELEM_GUID_OFFSET 0x4 +#define TELEM_BASE_OFFSET 0x8 +#define TELEM_ACCESS(v) ((v) & GENMASK(3, 0)) +#define TELEM_TYPE(v) (((v) & GENMASK(7, 4)) >> 4) +/* size is in bytes */ +#define TELEM_SIZE(v) (((v) & GENMASK(27, 12)) >> 10) + +/* Used by client hardware to identify a fixed telemetry entry*/ +#define TELEM_CLIENT_FIXED_BLOCK_GUID 0x10000000 + +enum telem_type { + TELEM_TYPE_PUNIT = 0, + TELEM_TYPE_CRASHLOG, + TELEM_TYPE_PUNIT_FIXED, +}; + +struct pmt_telem_priv { + int num_entries; + struct intel_pmt_entry entry[]; +}; + +static bool pmt_telem_region_overlaps(struct intel_pmt_entry *entry, + struct device *dev) +{ + u32 guid = readl(entry->disc_table + TELEM_GUID_OFFSET); + + if (intel_pmt_is_early_client_hw(dev)) { + u32 type = TELEM_TYPE(readl(entry->disc_table)); + + if ((type == TELEM_TYPE_PUNIT_FIXED) || + (guid == TELEM_CLIENT_FIXED_BLOCK_GUID)) + return true; + } + + return false; +} + +static int pmt_telem_header_decode(struct intel_pmt_entry *entry, + struct intel_pmt_header *header, + struct device *dev) +{ + void __iomem *disc_table = entry->disc_table; + + if (pmt_telem_region_overlaps(entry, dev)) + return 1; + + header->access_type = TELEM_ACCESS(readl(disc_table)); + header->guid = readl(disc_table + TELEM_GUID_OFFSET); + header->base_offset = readl(disc_table + TELEM_BASE_OFFSET); + + /* Size is measured in DWORDS, but accessor returns bytes */ + header->size = TELEM_SIZE(readl(disc_table)); + + /* + * Some devices may expose non-functioning entries that are + * reserved for future use. They have zero size. Do not fail + * probe for these. Just ignore them. + */ + if (header->size == 0) + return 1; + + return 0; +} + +static DEFINE_XARRAY_ALLOC(telem_array); +static struct intel_pmt_namespace pmt_telem_ns = { + .name = "telem", + .xa = &telem_array, + .pmt_header_decode = pmt_telem_header_decode, +}; + +static void pmt_telem_remove(struct auxiliary_device *auxdev) +{ + struct pmt_telem_priv *priv = auxiliary_get_drvdata(auxdev); + int i; + + for (i = 0; i < priv->num_entries; i++) + intel_pmt_dev_destroy(&priv->entry[i], &pmt_telem_ns); +} + +static int pmt_telem_probe(struct auxiliary_device *auxdev, const struct auxiliary_device_id *id) +{ + struct intel_vsec_device *intel_vsec_dev = auxdev_to_ivdev(auxdev); + struct pmt_telem_priv *priv; + size_t size; + int i, ret; + + size = struct_size(priv, entry, intel_vsec_dev->num_resources); + priv = devm_kzalloc(&auxdev->dev, size, GFP_KERNEL); + if (!priv) + return -ENOMEM; + + auxiliary_set_drvdata(auxdev, priv); + + for (i = 0; i < intel_vsec_dev->num_resources; i++) { + struct intel_pmt_entry *entry = &priv->entry[priv->num_entries]; + + ret = intel_pmt_dev_create(entry, &pmt_telem_ns, intel_vsec_dev, i); + if (ret < 0) + goto abort_probe; + if (ret) + continue; + + priv->num_entries++; + } + + return 0; +abort_probe: + pmt_telem_remove(auxdev); + return ret; +} + +static const struct auxiliary_device_id pmt_telem_id_table[] = { + { .name = "intel_vsec.telemetry" }, + {} +}; +MODULE_DEVICE_TABLE(auxiliary, pmt_telem_id_table); + +static struct auxiliary_driver pmt_telem_aux_driver = { + .id_table = pmt_telem_id_table, + .remove = pmt_telem_remove, + .probe = pmt_telem_probe, +}; + +static int __init pmt_telem_init(void) +{ + return auxiliary_driver_register(&pmt_telem_aux_driver); +} +module_init(pmt_telem_init); + +static void __exit pmt_telem_exit(void) +{ + auxiliary_driver_unregister(&pmt_telem_aux_driver); + xa_destroy(&telem_array); +} +module_exit(pmt_telem_exit); + +MODULE_AUTHOR("David E. Box <david.e.box@linux.intel.com>"); +MODULE_DESCRIPTION("Intel PMT Telemetry driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/platform/x86/intel/punit_ipc.c b/drivers/platform/x86/intel/punit_ipc.c new file mode 100644 index 000000000..66bb39fd0 --- /dev/null +++ b/drivers/platform/x86/intel/punit_ipc.c @@ -0,0 +1,341 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for the Intel P-Unit Mailbox IPC mechanism + * + * (C) Copyright 2015 Intel Corporation + * + * The heart of the P-Unit is the Foxton microcontroller and its firmware, + * which provide mailbox interface for power management usage. + */ + +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include <asm/intel_punit_ipc.h> + +/* IPC Mailbox registers */ +#define OFFSET_DATA_LOW 0x0 +#define OFFSET_DATA_HIGH 0x4 +/* bit field of interface register */ +#define CMD_RUN BIT(31) +#define CMD_ERRCODE_MASK GENMASK(7, 0) +#define CMD_PARA1_SHIFT 8 +#define CMD_PARA2_SHIFT 16 + +#define CMD_TIMEOUT_SECONDS 1 + +enum { + BASE_DATA = 0, + BASE_IFACE, + BASE_MAX, +}; + +typedef struct { + struct device *dev; + struct mutex lock; + int irq; + struct completion cmd_complete; + /* base of interface and data registers */ + void __iomem *base[RESERVED_IPC][BASE_MAX]; + IPC_TYPE type; +} IPC_DEV; + +static IPC_DEV *punit_ipcdev; + +static inline u32 ipc_read_status(IPC_DEV *ipcdev, IPC_TYPE type) +{ + return readl(ipcdev->base[type][BASE_IFACE]); +} + +static inline void ipc_write_cmd(IPC_DEV *ipcdev, IPC_TYPE type, u32 cmd) +{ + writel(cmd, ipcdev->base[type][BASE_IFACE]); +} + +static inline u32 ipc_read_data_low(IPC_DEV *ipcdev, IPC_TYPE type) +{ + return readl(ipcdev->base[type][BASE_DATA] + OFFSET_DATA_LOW); +} + +static inline u32 ipc_read_data_high(IPC_DEV *ipcdev, IPC_TYPE type) +{ + return readl(ipcdev->base[type][BASE_DATA] + OFFSET_DATA_HIGH); +} + +static inline void ipc_write_data_low(IPC_DEV *ipcdev, IPC_TYPE type, u32 data) +{ + writel(data, ipcdev->base[type][BASE_DATA] + OFFSET_DATA_LOW); +} + +static inline void ipc_write_data_high(IPC_DEV *ipcdev, IPC_TYPE type, u32 data) +{ + writel(data, ipcdev->base[type][BASE_DATA] + OFFSET_DATA_HIGH); +} + +static const char *ipc_err_string(int error) +{ + if (error == IPC_PUNIT_ERR_SUCCESS) + return "no error"; + else if (error == IPC_PUNIT_ERR_INVALID_CMD) + return "invalid command"; + else if (error == IPC_PUNIT_ERR_INVALID_PARAMETER) + return "invalid parameter"; + else if (error == IPC_PUNIT_ERR_CMD_TIMEOUT) + return "command timeout"; + else if (error == IPC_PUNIT_ERR_CMD_LOCKED) + return "command locked"; + else if (error == IPC_PUNIT_ERR_INVALID_VR_ID) + return "invalid vr id"; + else if (error == IPC_PUNIT_ERR_VR_ERR) + return "vr error"; + else + return "unknown error"; +} + +static int intel_punit_ipc_check_status(IPC_DEV *ipcdev, IPC_TYPE type) +{ + int loops = CMD_TIMEOUT_SECONDS * USEC_PER_SEC; + int errcode; + int status; + + if (ipcdev->irq) { + if (!wait_for_completion_timeout(&ipcdev->cmd_complete, + CMD_TIMEOUT_SECONDS * HZ)) { + dev_err(ipcdev->dev, "IPC timed out\n"); + return -ETIMEDOUT; + } + } else { + while ((ipc_read_status(ipcdev, type) & CMD_RUN) && --loops) + udelay(1); + if (!loops) { + dev_err(ipcdev->dev, "IPC timed out\n"); + return -ETIMEDOUT; + } + } + + status = ipc_read_status(ipcdev, type); + errcode = status & CMD_ERRCODE_MASK; + if (errcode) { + dev_err(ipcdev->dev, "IPC failed: %s, IPC_STS=0x%x\n", + ipc_err_string(errcode), status); + return -EIO; + } + + return 0; +} + +/** + * intel_punit_ipc_simple_command() - Simple IPC command + * @cmd: IPC command code. + * @para1: First 8bit parameter, set 0 if not used. + * @para2: Second 8bit parameter, set 0 if not used. + * + * Send a IPC command to P-Unit when there is no data transaction + * + * Return: IPC error code or 0 on success. + */ +int intel_punit_ipc_simple_command(int cmd, int para1, int para2) +{ + IPC_DEV *ipcdev = punit_ipcdev; + IPC_TYPE type; + u32 val; + int ret; + + mutex_lock(&ipcdev->lock); + + reinit_completion(&ipcdev->cmd_complete); + type = (cmd & IPC_PUNIT_CMD_TYPE_MASK) >> IPC_TYPE_OFFSET; + + val = cmd & ~IPC_PUNIT_CMD_TYPE_MASK; + val |= CMD_RUN | para2 << CMD_PARA2_SHIFT | para1 << CMD_PARA1_SHIFT; + ipc_write_cmd(ipcdev, type, val); + ret = intel_punit_ipc_check_status(ipcdev, type); + + mutex_unlock(&ipcdev->lock); + + return ret; +} +EXPORT_SYMBOL(intel_punit_ipc_simple_command); + +/** + * intel_punit_ipc_command() - IPC command with data and pointers + * @cmd: IPC command code. + * @para1: First 8bit parameter, set 0 if not used. + * @para2: Second 8bit parameter, set 0 if not used. + * @in: Input data, 32bit for BIOS cmd, two 32bit for GTD and ISPD. + * @out: Output data. + * + * Send a IPC command to P-Unit with data transaction + * + * Return: IPC error code or 0 on success. + */ +int intel_punit_ipc_command(u32 cmd, u32 para1, u32 para2, u32 *in, u32 *out) +{ + IPC_DEV *ipcdev = punit_ipcdev; + IPC_TYPE type; + u32 val; + int ret; + + mutex_lock(&ipcdev->lock); + + reinit_completion(&ipcdev->cmd_complete); + type = (cmd & IPC_PUNIT_CMD_TYPE_MASK) >> IPC_TYPE_OFFSET; + + if (in) { + ipc_write_data_low(ipcdev, type, *in); + if (type == GTDRIVER_IPC || type == ISPDRIVER_IPC) + ipc_write_data_high(ipcdev, type, *++in); + } + + val = cmd & ~IPC_PUNIT_CMD_TYPE_MASK; + val |= CMD_RUN | para2 << CMD_PARA2_SHIFT | para1 << CMD_PARA1_SHIFT; + ipc_write_cmd(ipcdev, type, val); + + ret = intel_punit_ipc_check_status(ipcdev, type); + if (ret) + goto out; + + if (out) { + *out = ipc_read_data_low(ipcdev, type); + if (type == GTDRIVER_IPC || type == ISPDRIVER_IPC) + *++out = ipc_read_data_high(ipcdev, type); + } + +out: + mutex_unlock(&ipcdev->lock); + return ret; +} +EXPORT_SYMBOL_GPL(intel_punit_ipc_command); + +static irqreturn_t intel_punit_ioc(int irq, void *dev_id) +{ + IPC_DEV *ipcdev = dev_id; + + complete(&ipcdev->cmd_complete); + return IRQ_HANDLED; +} + +static int intel_punit_get_bars(struct platform_device *pdev) +{ + void __iomem *addr; + + /* + * The following resources are required + * - BIOS_IPC BASE_DATA + * - BIOS_IPC BASE_IFACE + */ + addr = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(addr)) + return PTR_ERR(addr); + punit_ipcdev->base[BIOS_IPC][BASE_DATA] = addr; + + addr = devm_platform_ioremap_resource(pdev, 1); + if (IS_ERR(addr)) + return PTR_ERR(addr); + punit_ipcdev->base[BIOS_IPC][BASE_IFACE] = addr; + + /* + * The following resources are optional + * - ISPDRIVER_IPC BASE_DATA + * - ISPDRIVER_IPC BASE_IFACE + * - GTDRIVER_IPC BASE_DATA + * - GTDRIVER_IPC BASE_IFACE + */ + addr = devm_platform_ioremap_resource(pdev, 2); + if (!IS_ERR(addr)) + punit_ipcdev->base[ISPDRIVER_IPC][BASE_DATA] = addr; + + addr = devm_platform_ioremap_resource(pdev, 3); + if (!IS_ERR(addr)) + punit_ipcdev->base[ISPDRIVER_IPC][BASE_IFACE] = addr; + + addr = devm_platform_ioremap_resource(pdev, 4); + if (!IS_ERR(addr)) + punit_ipcdev->base[GTDRIVER_IPC][BASE_DATA] = addr; + + addr = devm_platform_ioremap_resource(pdev, 5); + if (!IS_ERR(addr)) + punit_ipcdev->base[GTDRIVER_IPC][BASE_IFACE] = addr; + + return 0; +} + +static int intel_punit_ipc_probe(struct platform_device *pdev) +{ + int irq, ret; + + punit_ipcdev = devm_kzalloc(&pdev->dev, + sizeof(*punit_ipcdev), GFP_KERNEL); + if (!punit_ipcdev) + return -ENOMEM; + + platform_set_drvdata(pdev, punit_ipcdev); + + irq = platform_get_irq_optional(pdev, 0); + if (irq < 0) { + dev_warn(&pdev->dev, "Invalid IRQ, using polling mode\n"); + } else { + ret = devm_request_irq(&pdev->dev, irq, intel_punit_ioc, + IRQF_NO_SUSPEND, "intel_punit_ipc", + &punit_ipcdev); + if (ret) { + dev_err(&pdev->dev, "Failed to request irq: %d\n", irq); + return ret; + } + punit_ipcdev->irq = irq; + } + + ret = intel_punit_get_bars(pdev); + if (ret) + return ret; + + punit_ipcdev->dev = &pdev->dev; + mutex_init(&punit_ipcdev->lock); + init_completion(&punit_ipcdev->cmd_complete); + + return 0; +} + +static int intel_punit_ipc_remove(struct platform_device *pdev) +{ + return 0; +} + +static const struct acpi_device_id punit_ipc_acpi_ids[] = { + { "INT34D4", 0 }, + { } +}; +MODULE_DEVICE_TABLE(acpi, punit_ipc_acpi_ids); + +static struct platform_driver intel_punit_ipc_driver = { + .probe = intel_punit_ipc_probe, + .remove = intel_punit_ipc_remove, + .driver = { + .name = "intel_punit_ipc", + .acpi_match_table = punit_ipc_acpi_ids, + }, +}; + +static int __init intel_punit_ipc_init(void) +{ + return platform_driver_register(&intel_punit_ipc_driver); +} + +static void __exit intel_punit_ipc_exit(void) +{ + platform_driver_unregister(&intel_punit_ipc_driver); +} + +MODULE_AUTHOR("Zha Qipeng <qipeng.zha@intel.com>"); +MODULE_DESCRIPTION("Intel P-Unit IPC driver"); +MODULE_LICENSE("GPL v2"); + +/* Some modules are dependent on this, so init earlier */ +fs_initcall(intel_punit_ipc_init); +module_exit(intel_punit_ipc_exit); diff --git a/drivers/platform/x86/intel/rst.c b/drivers/platform/x86/intel/rst.c new file mode 100644 index 000000000..3b81cb896 --- /dev/null +++ b/drivers/platform/x86/intel/rst.c @@ -0,0 +1,142 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2013 Matthew Garrett <mjg59@srcf.ucam.org> + */ + +#include <linux/acpi.h> +#include <linux/module.h> +#include <linux/slab.h> + +MODULE_LICENSE("GPL"); + +static ssize_t irst_show_wakeup_events(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct acpi_device *acpi; + unsigned long long value; + acpi_status status; + + acpi = to_acpi_device(dev); + + status = acpi_evaluate_integer(acpi->handle, "GFFS", NULL, &value); + if (ACPI_FAILURE(status)) + return -EINVAL; + + return sprintf(buf, "%lld\n", value); +} + +static ssize_t irst_store_wakeup_events(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct acpi_device *acpi; + acpi_status status; + unsigned long value; + int error; + + acpi = to_acpi_device(dev); + + error = kstrtoul(buf, 0, &value); + if (error) + return error; + + status = acpi_execute_simple_method(acpi->handle, "SFFS", value); + if (ACPI_FAILURE(status)) + return -EINVAL; + + return count; +} + +static struct device_attribute irst_wakeup_attr = { + .attr = { .name = "wakeup_events", .mode = 0600 }, + .show = irst_show_wakeup_events, + .store = irst_store_wakeup_events +}; + +static ssize_t irst_show_wakeup_time(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct acpi_device *acpi; + unsigned long long value; + acpi_status status; + + acpi = to_acpi_device(dev); + + status = acpi_evaluate_integer(acpi->handle, "GFTV", NULL, &value); + if (ACPI_FAILURE(status)) + return -EINVAL; + + return sprintf(buf, "%lld\n", value); +} + +static ssize_t irst_store_wakeup_time(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct acpi_device *acpi; + acpi_status status; + unsigned long value; + int error; + + acpi = to_acpi_device(dev); + + error = kstrtoul(buf, 0, &value); + if (error) + return error; + + status = acpi_execute_simple_method(acpi->handle, "SFTV", value); + if (ACPI_FAILURE(status)) + return -EINVAL; + + return count; +} + +static struct device_attribute irst_timeout_attr = { + .attr = { .name = "wakeup_time", .mode = 0600 }, + .show = irst_show_wakeup_time, + .store = irst_store_wakeup_time +}; + +static int irst_add(struct acpi_device *acpi) +{ + int error; + + error = device_create_file(&acpi->dev, &irst_timeout_attr); + if (unlikely(error)) + return error; + + error = device_create_file(&acpi->dev, &irst_wakeup_attr); + if (unlikely(error)) + device_remove_file(&acpi->dev, &irst_timeout_attr); + + return error; +} + +static int irst_remove(struct acpi_device *acpi) +{ + device_remove_file(&acpi->dev, &irst_wakeup_attr); + device_remove_file(&acpi->dev, &irst_timeout_attr); + + return 0; +} + +static const struct acpi_device_id irst_ids[] = { + {"INT3392", 0}, + {"", 0} +}; + +static struct acpi_driver irst_driver = { + .owner = THIS_MODULE, + .name = "intel_rapid_start", + .class = "intel_rapid_start", + .ids = irst_ids, + .ops = { + .add = irst_add, + .remove = irst_remove, + }, +}; + +module_acpi_driver(irst_driver); + +MODULE_DEVICE_TABLE(acpi, irst_ids); diff --git a/drivers/platform/x86/intel/sdsi.c b/drivers/platform/x86/intel/sdsi.c new file mode 100644 index 000000000..c830e98df --- /dev/null +++ b/drivers/platform/x86/intel/sdsi.c @@ -0,0 +1,590 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel Software Defined Silicon driver + * + * Copyright (c) 2022, Intel Corporation. + * All Rights Reserved. + * + * Author: "David E. Box" <david.e.box@linux.intel.com> + */ + +#include <linux/auxiliary_bus.h> +#include <linux/bits.h> +#include <linux/bitfield.h> +#include <linux/device.h> +#include <linux/iopoll.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/sysfs.h> +#include <linux/types.h> +#include <linux/uaccess.h> + +#include "vsec.h" + +#define ACCESS_TYPE_BARID 2 +#define ACCESS_TYPE_LOCAL 3 + +#define SDSI_MIN_SIZE_DWORDS 276 +#define SDSI_SIZE_CONTROL 8 +#define SDSI_SIZE_MAILBOX 1024 +#define SDSI_SIZE_REGS 72 +#define SDSI_SIZE_CMD sizeof(u64) + +/* + * Write messages are currently up to the size of the mailbox + * while read messages are up to 4 times the size of the + * mailbox, sent in packets + */ +#define SDSI_SIZE_WRITE_MSG SDSI_SIZE_MAILBOX +#define SDSI_SIZE_READ_MSG (SDSI_SIZE_MAILBOX * 4) + +#define SDSI_ENABLED_FEATURES_OFFSET 16 +#define SDSI_ENABLED BIT(3) +#define SDSI_SOCKET_ID_OFFSET 64 +#define SDSI_SOCKET_ID GENMASK(3, 0) + +#define SDSI_MBOX_CMD_SUCCESS 0x40 +#define SDSI_MBOX_CMD_TIMEOUT 0x80 + +#define MBOX_TIMEOUT_US 2000 +#define MBOX_TIMEOUT_ACQUIRE_US 1000 +#define MBOX_POLLING_PERIOD_US 100 +#define MBOX_ACQUIRE_NUM_RETRIES 5 +#define MBOX_ACQUIRE_RETRY_DELAY_MS 500 +#define MBOX_MAX_PACKETS 4 + +#define MBOX_OWNER_NONE 0x00 +#define MBOX_OWNER_INBAND 0x01 + +#define CTRL_RUN_BUSY BIT(0) +#define CTRL_READ_WRITE BIT(1) +#define CTRL_SOM BIT(2) +#define CTRL_EOM BIT(3) +#define CTRL_OWNER GENMASK(5, 4) +#define CTRL_COMPLETE BIT(6) +#define CTRL_READY BIT(7) +#define CTRL_STATUS GENMASK(15, 8) +#define CTRL_PACKET_SIZE GENMASK(31, 16) +#define CTRL_MSG_SIZE GENMASK(63, 48) + +#define DISC_TABLE_SIZE 12 +#define DT_ACCESS_TYPE GENMASK(3, 0) +#define DT_SIZE GENMASK(27, 12) +#define DT_TBIR GENMASK(2, 0) +#define DT_OFFSET(v) ((v) & GENMASK(31, 3)) + +enum sdsi_command { + SDSI_CMD_PROVISION_AKC = 0x04, + SDSI_CMD_PROVISION_CAP = 0x08, + SDSI_CMD_READ_STATE = 0x10, +}; + +struct sdsi_mbox_info { + u64 *payload; + void *buffer; + int size; +}; + +struct disc_table { + u32 access_info; + u32 guid; + u32 offset; +}; + +struct sdsi_priv { + struct mutex mb_lock; /* Mailbox access lock */ + struct device *dev; + void __iomem *control_addr; + void __iomem *mbox_addr; + void __iomem *regs_addr; + u32 guid; + bool sdsi_enabled; +}; + +/* SDSi mailbox operations must be performed using 64bit mov instructions */ +static __always_inline void +sdsi_memcpy64_toio(u64 __iomem *to, const u64 *from, size_t count_bytes) +{ + size_t count = count_bytes / sizeof(*to); + int i; + + for (i = 0; i < count; i++) + writeq(from[i], &to[i]); +} + +static __always_inline void +sdsi_memcpy64_fromio(u64 *to, const u64 __iomem *from, size_t count_bytes) +{ + size_t count = count_bytes / sizeof(*to); + int i; + + for (i = 0; i < count; i++) + to[i] = readq(&from[i]); +} + +static inline void sdsi_complete_transaction(struct sdsi_priv *priv) +{ + u64 control = FIELD_PREP(CTRL_COMPLETE, 1); + + lockdep_assert_held(&priv->mb_lock); + writeq(control, priv->control_addr); +} + +static int sdsi_status_to_errno(u32 status) +{ + switch (status) { + case SDSI_MBOX_CMD_SUCCESS: + return 0; + case SDSI_MBOX_CMD_TIMEOUT: + return -ETIMEDOUT; + default: + return -EIO; + } +} + +static int sdsi_mbox_cmd_read(struct sdsi_priv *priv, struct sdsi_mbox_info *info, + size_t *data_size) +{ + struct device *dev = priv->dev; + u32 total, loop, eom, status, message_size; + u64 control; + int ret; + + lockdep_assert_held(&priv->mb_lock); + + /* Format and send the read command */ + control = FIELD_PREP(CTRL_EOM, 1) | + FIELD_PREP(CTRL_SOM, 1) | + FIELD_PREP(CTRL_RUN_BUSY, 1) | + FIELD_PREP(CTRL_PACKET_SIZE, info->size); + writeq(control, priv->control_addr); + + /* For reads, data sizes that are larger than the mailbox size are read in packets. */ + total = 0; + loop = 0; + do { + void *buf = info->buffer + (SDSI_SIZE_MAILBOX * loop); + u32 packet_size; + + /* Poll on ready bit */ + ret = readq_poll_timeout(priv->control_addr, control, control & CTRL_READY, + MBOX_POLLING_PERIOD_US, MBOX_TIMEOUT_US); + if (ret) + break; + + eom = FIELD_GET(CTRL_EOM, control); + status = FIELD_GET(CTRL_STATUS, control); + packet_size = FIELD_GET(CTRL_PACKET_SIZE, control); + message_size = FIELD_GET(CTRL_MSG_SIZE, control); + + ret = sdsi_status_to_errno(status); + if (ret) + break; + + /* Only the last packet can be less than the mailbox size. */ + if (!eom && packet_size != SDSI_SIZE_MAILBOX) { + dev_err(dev, "Invalid packet size\n"); + ret = -EPROTO; + break; + } + + if (packet_size > SDSI_SIZE_MAILBOX) { + dev_err(dev, "Packet size too large\n"); + ret = -EPROTO; + break; + } + + sdsi_memcpy64_fromio(buf, priv->mbox_addr, round_up(packet_size, SDSI_SIZE_CMD)); + + total += packet_size; + + sdsi_complete_transaction(priv); + } while (!eom && ++loop < MBOX_MAX_PACKETS); + + if (ret) { + sdsi_complete_transaction(priv); + return ret; + } + + if (!eom) { + dev_err(dev, "Exceeded read attempts\n"); + return -EPROTO; + } + + /* Message size check is only valid for multi-packet transfers */ + if (loop && total != message_size) + dev_warn(dev, "Read count %u differs from expected count %u\n", + total, message_size); + + *data_size = total; + + return 0; +} + +static int sdsi_mbox_cmd_write(struct sdsi_priv *priv, struct sdsi_mbox_info *info) +{ + u64 control; + u32 status; + int ret; + + lockdep_assert_held(&priv->mb_lock); + + /* Write rest of the payload */ + sdsi_memcpy64_toio(priv->mbox_addr + SDSI_SIZE_CMD, info->payload + 1, + info->size - SDSI_SIZE_CMD); + + /* Format and send the write command */ + control = FIELD_PREP(CTRL_EOM, 1) | + FIELD_PREP(CTRL_SOM, 1) | + FIELD_PREP(CTRL_RUN_BUSY, 1) | + FIELD_PREP(CTRL_READ_WRITE, 1) | + FIELD_PREP(CTRL_PACKET_SIZE, info->size); + writeq(control, priv->control_addr); + + /* Poll on ready bit */ + ret = readq_poll_timeout(priv->control_addr, control, control & CTRL_READY, + MBOX_POLLING_PERIOD_US, MBOX_TIMEOUT_US); + + if (ret) + goto release_mbox; + + status = FIELD_GET(CTRL_STATUS, control); + ret = sdsi_status_to_errno(status); + +release_mbox: + sdsi_complete_transaction(priv); + + return ret; +} + +static int sdsi_mbox_acquire(struct sdsi_priv *priv, struct sdsi_mbox_info *info) +{ + u64 control; + u32 owner; + int ret, retries = 0; + + lockdep_assert_held(&priv->mb_lock); + + /* Check mailbox is available */ + control = readq(priv->control_addr); + owner = FIELD_GET(CTRL_OWNER, control); + if (owner != MBOX_OWNER_NONE) + return -EBUSY; + + /* + * If there has been no recent transaction and no one owns the mailbox, + * we should acquire it in under 1ms. However, if we've accessed it + * recently it may take up to 2.1 seconds to acquire it again. + */ + do { + /* Write first qword of payload */ + writeq(info->payload[0], priv->mbox_addr); + + /* Check for ownership */ + ret = readq_poll_timeout(priv->control_addr, control, + FIELD_GET(CTRL_OWNER, control) == MBOX_OWNER_INBAND, + MBOX_POLLING_PERIOD_US, MBOX_TIMEOUT_ACQUIRE_US); + + if (FIELD_GET(CTRL_OWNER, control) == MBOX_OWNER_NONE && + retries++ < MBOX_ACQUIRE_NUM_RETRIES) { + msleep(MBOX_ACQUIRE_RETRY_DELAY_MS); + continue; + } + + /* Either we got it or someone else did. */ + break; + } while (true); + + return ret; +} + +static int sdsi_mbox_write(struct sdsi_priv *priv, struct sdsi_mbox_info *info) +{ + int ret; + + lockdep_assert_held(&priv->mb_lock); + + ret = sdsi_mbox_acquire(priv, info); + if (ret) + return ret; + + return sdsi_mbox_cmd_write(priv, info); +} + +static int sdsi_mbox_read(struct sdsi_priv *priv, struct sdsi_mbox_info *info, size_t *data_size) +{ + int ret; + + lockdep_assert_held(&priv->mb_lock); + + ret = sdsi_mbox_acquire(priv, info); + if (ret) + return ret; + + return sdsi_mbox_cmd_read(priv, info, data_size); +} + +static ssize_t sdsi_provision(struct sdsi_priv *priv, char *buf, size_t count, + enum sdsi_command command) +{ + struct sdsi_mbox_info info; + int ret; + + if (!priv->sdsi_enabled) + return -EPERM; + + if (count > (SDSI_SIZE_WRITE_MSG - SDSI_SIZE_CMD)) + return -EOVERFLOW; + + /* Qword aligned message + command qword */ + info.size = round_up(count, SDSI_SIZE_CMD) + SDSI_SIZE_CMD; + + info.payload = kzalloc(info.size, GFP_KERNEL); + if (!info.payload) + return -ENOMEM; + + /* Copy message to payload buffer */ + memcpy(info.payload, buf, count); + + /* Command is last qword of payload buffer */ + info.payload[(info.size - SDSI_SIZE_CMD) / SDSI_SIZE_CMD] = command; + + ret = mutex_lock_interruptible(&priv->mb_lock); + if (ret) + goto free_payload; + ret = sdsi_mbox_write(priv, &info); + mutex_unlock(&priv->mb_lock); + +free_payload: + kfree(info.payload); + + if (ret) + return ret; + + return count; +} + +static ssize_t provision_akc_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, char *buf, loff_t off, + size_t count) +{ + struct device *dev = kobj_to_dev(kobj); + struct sdsi_priv *priv = dev_get_drvdata(dev); + + if (off) + return -ESPIPE; + + return sdsi_provision(priv, buf, count, SDSI_CMD_PROVISION_AKC); +} +static BIN_ATTR_WO(provision_akc, SDSI_SIZE_WRITE_MSG); + +static ssize_t provision_cap_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, char *buf, loff_t off, + size_t count) +{ + struct device *dev = kobj_to_dev(kobj); + struct sdsi_priv *priv = dev_get_drvdata(dev); + + if (off) + return -ESPIPE; + + return sdsi_provision(priv, buf, count, SDSI_CMD_PROVISION_CAP); +} +static BIN_ATTR_WO(provision_cap, SDSI_SIZE_WRITE_MSG); + +static long state_certificate_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, char *buf, loff_t off, + size_t count) +{ + struct device *dev = kobj_to_dev(kobj); + struct sdsi_priv *priv = dev_get_drvdata(dev); + u64 command = SDSI_CMD_READ_STATE; + struct sdsi_mbox_info info; + size_t size; + int ret; + + if (!priv->sdsi_enabled) + return -EPERM; + + if (off) + return 0; + + /* Buffer for return data */ + info.buffer = kmalloc(SDSI_SIZE_READ_MSG, GFP_KERNEL); + if (!info.buffer) + return -ENOMEM; + + info.payload = &command; + info.size = sizeof(command); + + ret = mutex_lock_interruptible(&priv->mb_lock); + if (ret) + goto free_buffer; + ret = sdsi_mbox_read(priv, &info, &size); + mutex_unlock(&priv->mb_lock); + if (ret < 0) + goto free_buffer; + + if (size > count) + size = count; + + memcpy(buf, info.buffer, size); + +free_buffer: + kfree(info.buffer); + + if (ret) + return ret; + + return size; +} +static BIN_ATTR(state_certificate, 0400, state_certificate_read, NULL, SDSI_SIZE_READ_MSG); + +static ssize_t registers_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, char *buf, loff_t off, + size_t count) +{ + struct device *dev = kobj_to_dev(kobj); + struct sdsi_priv *priv = dev_get_drvdata(dev); + void __iomem *addr = priv->regs_addr; + + memcpy_fromio(buf, addr + off, count); + + return count; +} +static BIN_ATTR(registers, 0400, registers_read, NULL, SDSI_SIZE_REGS); + +static struct bin_attribute *sdsi_bin_attrs[] = { + &bin_attr_registers, + &bin_attr_state_certificate, + &bin_attr_provision_akc, + &bin_attr_provision_cap, + NULL +}; + +static ssize_t guid_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct sdsi_priv *priv = dev_get_drvdata(dev); + + return sysfs_emit(buf, "0x%x\n", priv->guid); +} +static DEVICE_ATTR_RO(guid); + +static struct attribute *sdsi_attrs[] = { + &dev_attr_guid.attr, + NULL +}; + +static const struct attribute_group sdsi_group = { + .attrs = sdsi_attrs, + .bin_attrs = sdsi_bin_attrs, +}; +__ATTRIBUTE_GROUPS(sdsi); + +static int sdsi_map_mbox_registers(struct sdsi_priv *priv, struct pci_dev *parent, + struct disc_table *disc_table, struct resource *disc_res) +{ + u32 access_type = FIELD_GET(DT_ACCESS_TYPE, disc_table->access_info); + u32 size = FIELD_GET(DT_SIZE, disc_table->access_info); + u32 tbir = FIELD_GET(DT_TBIR, disc_table->offset); + u32 offset = DT_OFFSET(disc_table->offset); + u32 features_offset; + struct resource res = {}; + + /* Starting location of SDSi MMIO region based on access type */ + switch (access_type) { + case ACCESS_TYPE_LOCAL: + if (tbir) { + dev_err(priv->dev, "Unsupported BAR index %u for access type %u\n", + tbir, access_type); + return -EINVAL; + } + + /* + * For access_type LOCAL, the base address is as follows: + * base address = end of discovery region + base offset + 1 + */ + res.start = disc_res->end + offset + 1; + break; + + case ACCESS_TYPE_BARID: + res.start = pci_resource_start(parent, tbir) + offset; + break; + + default: + dev_err(priv->dev, "Unrecognized access_type %u\n", access_type); + return -EINVAL; + } + + res.end = res.start + size * sizeof(u32) - 1; + res.flags = IORESOURCE_MEM; + + priv->control_addr = devm_ioremap_resource(priv->dev, &res); + if (IS_ERR(priv->control_addr)) + return PTR_ERR(priv->control_addr); + + priv->mbox_addr = priv->control_addr + SDSI_SIZE_CONTROL; + priv->regs_addr = priv->mbox_addr + SDSI_SIZE_MAILBOX; + + features_offset = readq(priv->regs_addr + SDSI_ENABLED_FEATURES_OFFSET); + priv->sdsi_enabled = !!(features_offset & SDSI_ENABLED); + + return 0; +} + +static int sdsi_probe(struct auxiliary_device *auxdev, const struct auxiliary_device_id *id) +{ + struct intel_vsec_device *intel_cap_dev = auxdev_to_ivdev(auxdev); + struct disc_table disc_table; + struct resource *disc_res; + void __iomem *disc_addr; + struct sdsi_priv *priv; + int ret; + + priv = devm_kzalloc(&auxdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = &auxdev->dev; + mutex_init(&priv->mb_lock); + auxiliary_set_drvdata(auxdev, priv); + + /* Get the SDSi discovery table */ + disc_res = &intel_cap_dev->resource[0]; + disc_addr = devm_ioremap_resource(&auxdev->dev, disc_res); + if (IS_ERR(disc_addr)) + return PTR_ERR(disc_addr); + + memcpy_fromio(&disc_table, disc_addr, DISC_TABLE_SIZE); + + priv->guid = disc_table.guid; + + /* Map the SDSi mailbox registers */ + ret = sdsi_map_mbox_registers(priv, intel_cap_dev->pcidev, &disc_table, disc_res); + if (ret) + return ret; + + return 0; +} + +static const struct auxiliary_device_id sdsi_aux_id_table[] = { + { .name = "intel_vsec.sdsi" }, + {} +}; +MODULE_DEVICE_TABLE(auxiliary, sdsi_aux_id_table); + +static struct auxiliary_driver sdsi_aux_driver = { + .driver = { + .dev_groups = sdsi_groups, + }, + .id_table = sdsi_aux_id_table, + .probe = sdsi_probe, + /* No remove. All resources are handled under devm */ +}; +module_auxiliary_driver(sdsi_aux_driver); + +MODULE_AUTHOR("David E. Box <david.e.box@linux.intel.com>"); +MODULE_DESCRIPTION("Intel Software Defined Silicon driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/intel/smartconnect.c b/drivers/platform/x86/intel/smartconnect.c new file mode 100644 index 000000000..64c2dc934 --- /dev/null +++ b/drivers/platform/x86/intel/smartconnect.c @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2013 Matthew Garrett <mjg59@srcf.ucam.org> + */ + +#include <linux/acpi.h> +#include <linux/module.h> + +MODULE_LICENSE("GPL"); + +static int smartconnect_acpi_init(struct acpi_device *acpi) +{ + unsigned long long value; + acpi_status status; + + status = acpi_evaluate_integer(acpi->handle, "GAOS", NULL, &value); + if (ACPI_FAILURE(status)) + return -EINVAL; + + if (value & 0x1) { + dev_info(&acpi->dev, "Disabling Intel Smart Connect\n"); + status = acpi_execute_simple_method(acpi->handle, "SAOS", 0); + } + + return 0; +} + +static const struct acpi_device_id smartconnect_ids[] = { + {"INT33A0", 0}, + {"", 0} +}; +MODULE_DEVICE_TABLE(acpi, smartconnect_ids); + +static struct acpi_driver smartconnect_driver = { + .owner = THIS_MODULE, + .name = "intel_smart_connect", + .class = "intel_smart_connect", + .ids = smartconnect_ids, + .ops = { + .add = smartconnect_acpi_init, + }, +}; + +module_acpi_driver(smartconnect_driver); diff --git a/drivers/platform/x86/intel/speed_select_if/Kconfig b/drivers/platform/x86/intel/speed_select_if/Kconfig new file mode 100644 index 000000000..ce3e3dc07 --- /dev/null +++ b/drivers/platform/x86/intel/speed_select_if/Kconfig @@ -0,0 +1,17 @@ +menu "Intel Speed Select Technology interface support" + depends on PCI + depends on X86_64 || COMPILE_TEST + +config INTEL_SPEED_SELECT_INTERFACE + tristate "Intel(R) Speed Select Technology interface drivers" + help + This config enables the Intel(R) Speed Select Technology interface + drivers. The Intel(R) speed select technology features are non + architectural and only supported on specific Xeon(R) servers. + These drivers provide interface to directly communicate with hardware + via MMIO and Mail boxes to enumerate and control all the speed select + features. + + Enable this config, if there is a need to enable and control the + Intel(R) Speed Select Technology features from the user space. +endmenu diff --git a/drivers/platform/x86/intel/speed_select_if/Makefile b/drivers/platform/x86/intel/speed_select_if/Makefile new file mode 100644 index 000000000..856076206 --- /dev/null +++ b/drivers/platform/x86/intel/speed_select_if/Makefile @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile - Intel Speed Select Interface drivers +# Copyright (c) 2019, Intel Corporation. +# + +obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE) += isst_if_common.o +obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE) += isst_if_mmio.o +obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE) += isst_if_mbox_pci.o +obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE) += isst_if_mbox_msr.o diff --git a/drivers/platform/x86/intel/speed_select_if/isst_if_common.c b/drivers/platform/x86/intel/speed_select_if/isst_if_common.c new file mode 100644 index 000000000..f6b32d31c --- /dev/null +++ b/drivers/platform/x86/intel/speed_select_if/isst_if_common.c @@ -0,0 +1,793 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel Speed Select Interface: Common functions + * Copyright (c) 2019, Intel Corporation. + * All rights reserved. + * + * Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> + */ + +#include <linux/cpufeature.h> +#include <linux/cpuhotplug.h> +#include <linux/fs.h> +#include <linux/hashtable.h> +#include <linux/miscdevice.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/sched/signal.h> +#include <linux/slab.h> +#include <linux/uaccess.h> +#include <uapi/linux/isst_if.h> + +#include "isst_if_common.h" + +#define MSR_THREAD_ID_INFO 0x53 +#define MSR_CPU_BUS_NUMBER 0x128 + +static struct isst_if_cmd_cb punit_callbacks[ISST_IF_DEV_MAX]; + +static int punit_msr_white_list[] = { + MSR_TURBO_RATIO_LIMIT, + MSR_CONFIG_TDP_CONTROL, + MSR_TURBO_RATIO_LIMIT1, + MSR_TURBO_RATIO_LIMIT2, +}; + +struct isst_valid_cmd_ranges { + u16 cmd; + u16 sub_cmd_beg; + u16 sub_cmd_end; +}; + +struct isst_cmd_set_req_type { + u16 cmd; + u16 sub_cmd; + u16 param; +}; + +static const struct isst_valid_cmd_ranges isst_valid_cmds[] = { + {0xD0, 0x00, 0x03}, + {0x7F, 0x00, 0x0B}, + {0x7F, 0x10, 0x12}, + {0x7F, 0x20, 0x23}, + {0x94, 0x03, 0x03}, + {0x95, 0x03, 0x03}, +}; + +static const struct isst_cmd_set_req_type isst_cmd_set_reqs[] = { + {0xD0, 0x00, 0x08}, + {0xD0, 0x01, 0x08}, + {0xD0, 0x02, 0x08}, + {0xD0, 0x03, 0x08}, + {0x7F, 0x02, 0x00}, + {0x7F, 0x08, 0x00}, + {0x95, 0x03, 0x03}, +}; + +struct isst_cmd { + struct hlist_node hnode; + u64 data; + u32 cmd; + int cpu; + int mbox_cmd_type; + u32 param; +}; + +static DECLARE_HASHTABLE(isst_hash, 8); +static DEFINE_MUTEX(isst_hash_lock); + +static int isst_store_new_cmd(int cmd, u32 cpu, int mbox_cmd_type, u32 param, + u32 data) +{ + struct isst_cmd *sst_cmd; + + sst_cmd = kmalloc(sizeof(*sst_cmd), GFP_KERNEL); + if (!sst_cmd) + return -ENOMEM; + + sst_cmd->cpu = cpu; + sst_cmd->cmd = cmd; + sst_cmd->mbox_cmd_type = mbox_cmd_type; + sst_cmd->param = param; + sst_cmd->data = data; + + hash_add(isst_hash, &sst_cmd->hnode, sst_cmd->cmd); + + return 0; +} + +static void isst_delete_hash(void) +{ + struct isst_cmd *sst_cmd; + struct hlist_node *tmp; + int i; + + hash_for_each_safe(isst_hash, i, tmp, sst_cmd, hnode) { + hash_del(&sst_cmd->hnode); + kfree(sst_cmd); + } +} + +/** + * isst_store_cmd() - Store command to a hash table + * @cmd: Mailbox command. + * @sub_cmd: Mailbox sub-command or MSR id. + * @mbox_cmd_type: Mailbox or MSR command. + * @param: Mailbox parameter. + * @data: Mailbox request data or MSR data. + * + * Stores the command to a hash table if there is no such command already + * stored. If already stored update the latest parameter and data for the + * command. + * + * Return: Return result of store to hash table, 0 for success, others for + * failure. + */ +int isst_store_cmd(int cmd, int sub_cmd, u32 cpu, int mbox_cmd_type, + u32 param, u64 data) +{ + struct isst_cmd *sst_cmd; + int full_cmd, ret; + + full_cmd = (cmd & GENMASK_ULL(15, 0)) << 16; + full_cmd |= (sub_cmd & GENMASK_ULL(15, 0)); + mutex_lock(&isst_hash_lock); + hash_for_each_possible(isst_hash, sst_cmd, hnode, full_cmd) { + if (sst_cmd->cmd == full_cmd && sst_cmd->cpu == cpu && + sst_cmd->mbox_cmd_type == mbox_cmd_type) { + sst_cmd->param = param; + sst_cmd->data = data; + mutex_unlock(&isst_hash_lock); + return 0; + } + } + + ret = isst_store_new_cmd(full_cmd, cpu, mbox_cmd_type, param, data); + mutex_unlock(&isst_hash_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(isst_store_cmd); + +static void isst_mbox_resume_command(struct isst_if_cmd_cb *cb, + struct isst_cmd *sst_cmd) +{ + struct isst_if_mbox_cmd mbox_cmd; + int wr_only; + + mbox_cmd.command = (sst_cmd->cmd & GENMASK_ULL(31, 16)) >> 16; + mbox_cmd.sub_command = sst_cmd->cmd & GENMASK_ULL(15, 0); + mbox_cmd.parameter = sst_cmd->param; + mbox_cmd.req_data = sst_cmd->data; + mbox_cmd.logical_cpu = sst_cmd->cpu; + (cb->cmd_callback)((u8 *)&mbox_cmd, &wr_only, 1); +} + +/** + * isst_resume_common() - Process Resume request + * + * On resume replay all mailbox commands and MSRs. + * + * Return: None. + */ +void isst_resume_common(void) +{ + struct isst_cmd *sst_cmd; + int i; + + hash_for_each(isst_hash, i, sst_cmd, hnode) { + struct isst_if_cmd_cb *cb; + + if (sst_cmd->mbox_cmd_type) { + cb = &punit_callbacks[ISST_IF_DEV_MBOX]; + if (cb->registered) + isst_mbox_resume_command(cb, sst_cmd); + } else { + wrmsrl_safe_on_cpu(sst_cmd->cpu, sst_cmd->cmd, + sst_cmd->data); + } + } +} +EXPORT_SYMBOL_GPL(isst_resume_common); + +static void isst_restore_msr_local(int cpu) +{ + struct isst_cmd *sst_cmd; + int i; + + mutex_lock(&isst_hash_lock); + for (i = 0; i < ARRAY_SIZE(punit_msr_white_list); ++i) { + if (!punit_msr_white_list[i]) + break; + + hash_for_each_possible(isst_hash, sst_cmd, hnode, + punit_msr_white_list[i]) { + if (!sst_cmd->mbox_cmd_type && sst_cmd->cpu == cpu) + wrmsrl_safe(sst_cmd->cmd, sst_cmd->data); + } + } + mutex_unlock(&isst_hash_lock); +} + +/** + * isst_if_mbox_cmd_invalid() - Check invalid mailbox commands + * @cmd: Pointer to the command structure to verify. + * + * Invalid command to PUNIT to may result in instability of the platform. + * This function has a whitelist of commands, which are allowed. + * + * Return: Return true if the command is invalid, else false. + */ +bool isst_if_mbox_cmd_invalid(struct isst_if_mbox_cmd *cmd) +{ + int i; + + if (cmd->logical_cpu >= nr_cpu_ids) + return true; + + for (i = 0; i < ARRAY_SIZE(isst_valid_cmds); ++i) { + if (cmd->command == isst_valid_cmds[i].cmd && + (cmd->sub_command >= isst_valid_cmds[i].sub_cmd_beg && + cmd->sub_command <= isst_valid_cmds[i].sub_cmd_end)) { + return false; + } + } + + return true; +} +EXPORT_SYMBOL_GPL(isst_if_mbox_cmd_invalid); + +/** + * isst_if_mbox_cmd_set_req() - Check mailbox command is a set request + * @cmd: Pointer to the command structure to verify. + * + * Check if the given mail box level is set request and not a get request. + * + * Return: Return true if the command is set_req, else false. + */ +bool isst_if_mbox_cmd_set_req(struct isst_if_mbox_cmd *cmd) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(isst_cmd_set_reqs); ++i) { + if (cmd->command == isst_cmd_set_reqs[i].cmd && + cmd->sub_command == isst_cmd_set_reqs[i].sub_cmd && + cmd->parameter == isst_cmd_set_reqs[i].param) { + return true; + } + } + + return false; +} +EXPORT_SYMBOL_GPL(isst_if_mbox_cmd_set_req); + +static int isst_if_get_platform_info(void __user *argp) +{ + struct isst_if_platform_info info; + + info.api_version = ISST_IF_API_VERSION; + info.driver_version = ISST_IF_DRIVER_VERSION; + info.max_cmds_per_ioctl = ISST_IF_CMD_LIMIT; + info.mbox_supported = punit_callbacks[ISST_IF_DEV_MBOX].registered; + info.mmio_supported = punit_callbacks[ISST_IF_DEV_MMIO].registered; + + if (copy_to_user(argp, &info, sizeof(info))) + return -EFAULT; + + return 0; +} + +#define ISST_MAX_BUS_NUMBER 2 + +struct isst_if_cpu_info { + /* For BUS 0 and BUS 1 only, which we need for PUNIT interface */ + int bus_info[ISST_MAX_BUS_NUMBER]; + struct pci_dev *pci_dev[ISST_MAX_BUS_NUMBER]; + int punit_cpu_id; + int numa_node; +}; + +struct isst_if_pkg_info { + struct pci_dev *pci_dev[ISST_MAX_BUS_NUMBER]; +}; + +static struct isst_if_cpu_info *isst_cpu_info; +static struct isst_if_pkg_info *isst_pkg_info; + +static struct pci_dev *_isst_if_get_pci_dev(int cpu, int bus_no, int dev, int fn) +{ + struct pci_dev *matched_pci_dev = NULL; + struct pci_dev *pci_dev = NULL; + struct pci_dev *_pci_dev = NULL; + int no_matches = 0, pkg_id; + int bus_number; + + if (bus_no < 0 || bus_no >= ISST_MAX_BUS_NUMBER || cpu < 0 || + cpu >= nr_cpu_ids || cpu >= num_possible_cpus()) + return NULL; + + pkg_id = topology_physical_package_id(cpu); + + bus_number = isst_cpu_info[cpu].bus_info[bus_no]; + if (bus_number < 0) + return NULL; + + for_each_pci_dev(_pci_dev) { + int node; + + if (_pci_dev->bus->number != bus_number || + _pci_dev->devfn != PCI_DEVFN(dev, fn)) + continue; + + ++no_matches; + if (!matched_pci_dev) + matched_pci_dev = _pci_dev; + + node = dev_to_node(&_pci_dev->dev); + if (node == NUMA_NO_NODE) { + pr_info("Fail to get numa node for CPU:%d bus:%d dev:%d fn:%d\n", + cpu, bus_no, dev, fn); + continue; + } + + if (node == isst_cpu_info[cpu].numa_node) { + isst_pkg_info[pkg_id].pci_dev[bus_no] = _pci_dev; + + pci_dev = _pci_dev; + break; + } + } + + /* + * If there is no numa matched pci_dev, then there can be following cases: + * 1. CONFIG_NUMA is not defined: In this case if there is only single device + * match, then we don't need numa information. Simply return last match. + * Othewise return NULL. + * 2. NUMA information is not exposed via _SEG method. In this case it is similar + * to case 1. + * 3. Numa information doesn't match with CPU numa node and more than one match + * return NULL. + */ + if (!pci_dev && no_matches == 1) + pci_dev = matched_pci_dev; + + /* Return pci_dev pointer for any matched CPU in the package */ + if (!pci_dev) + pci_dev = isst_pkg_info[pkg_id].pci_dev[bus_no]; + + return pci_dev; +} + +/** + * isst_if_get_pci_dev() - Get the PCI device instance for a CPU + * @cpu: Logical CPU number. + * @bus_number: The bus number assigned by the hardware. + * @dev: The device number assigned by the hardware. + * @fn: The function number assigned by the hardware. + * + * Using cached bus information, find out the PCI device for a bus number, + * device and function. + * + * Return: Return pci_dev pointer or NULL. + */ +struct pci_dev *isst_if_get_pci_dev(int cpu, int bus_no, int dev, int fn) +{ + struct pci_dev *pci_dev; + + if (bus_no < 0 || bus_no >= ISST_MAX_BUS_NUMBER || cpu < 0 || + cpu >= nr_cpu_ids || cpu >= num_possible_cpus()) + return NULL; + + pci_dev = isst_cpu_info[cpu].pci_dev[bus_no]; + + if (pci_dev && pci_dev->devfn == PCI_DEVFN(dev, fn)) + return pci_dev; + + return _isst_if_get_pci_dev(cpu, bus_no, dev, fn); +} +EXPORT_SYMBOL_GPL(isst_if_get_pci_dev); + +static int isst_if_cpu_online(unsigned int cpu) +{ + u64 data; + int ret; + + isst_cpu_info[cpu].numa_node = cpu_to_node(cpu); + + ret = rdmsrl_safe(MSR_CPU_BUS_NUMBER, &data); + if (ret) { + /* This is not a fatal error on MSR mailbox only I/F */ + isst_cpu_info[cpu].bus_info[0] = -1; + isst_cpu_info[cpu].bus_info[1] = -1; + } else { + isst_cpu_info[cpu].bus_info[0] = data & 0xff; + isst_cpu_info[cpu].bus_info[1] = (data >> 8) & 0xff; + isst_cpu_info[cpu].pci_dev[0] = _isst_if_get_pci_dev(cpu, 0, 0, 1); + isst_cpu_info[cpu].pci_dev[1] = _isst_if_get_pci_dev(cpu, 1, 30, 1); + } + + ret = rdmsrl_safe(MSR_THREAD_ID_INFO, &data); + if (ret) { + isst_cpu_info[cpu].punit_cpu_id = -1; + return ret; + } + isst_cpu_info[cpu].punit_cpu_id = data; + + isst_restore_msr_local(cpu); + + return 0; +} + +static int isst_if_online_id; + +static int isst_if_cpu_info_init(void) +{ + int ret; + + isst_cpu_info = kcalloc(num_possible_cpus(), + sizeof(*isst_cpu_info), + GFP_KERNEL); + if (!isst_cpu_info) + return -ENOMEM; + + isst_pkg_info = kcalloc(topology_max_packages(), + sizeof(*isst_pkg_info), + GFP_KERNEL); + if (!isst_pkg_info) { + kfree(isst_cpu_info); + return -ENOMEM; + } + + ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, + "platform/x86/isst-if:online", + isst_if_cpu_online, NULL); + if (ret < 0) { + kfree(isst_pkg_info); + kfree(isst_cpu_info); + return ret; + } + + isst_if_online_id = ret; + + return 0; +} + +static void isst_if_cpu_info_exit(void) +{ + cpuhp_remove_state(isst_if_online_id); + kfree(isst_pkg_info); + kfree(isst_cpu_info); +}; + +static long isst_if_proc_phyid_req(u8 *cmd_ptr, int *write_only, int resume) +{ + struct isst_if_cpu_map *cpu_map; + + cpu_map = (struct isst_if_cpu_map *)cmd_ptr; + if (cpu_map->logical_cpu >= nr_cpu_ids || + cpu_map->logical_cpu >= num_possible_cpus()) + return -EINVAL; + + *write_only = 0; + cpu_map->physical_cpu = isst_cpu_info[cpu_map->logical_cpu].punit_cpu_id; + + return 0; +} + +static bool match_punit_msr_white_list(int msr) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(punit_msr_white_list); ++i) { + if (punit_msr_white_list[i] == msr) + return true; + } + + return false; +} + +static long isst_if_msr_cmd_req(u8 *cmd_ptr, int *write_only, int resume) +{ + struct isst_if_msr_cmd *msr_cmd; + int ret; + + msr_cmd = (struct isst_if_msr_cmd *)cmd_ptr; + + if (!match_punit_msr_white_list(msr_cmd->msr)) + return -EINVAL; + + if (msr_cmd->logical_cpu >= nr_cpu_ids) + return -EINVAL; + + if (msr_cmd->read_write) { + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + ret = wrmsrl_safe_on_cpu(msr_cmd->logical_cpu, + msr_cmd->msr, + msr_cmd->data); + *write_only = 1; + if (!ret && !resume) + ret = isst_store_cmd(0, msr_cmd->msr, + msr_cmd->logical_cpu, + 0, 0, msr_cmd->data); + } else { + u64 data; + + ret = rdmsrl_safe_on_cpu(msr_cmd->logical_cpu, + msr_cmd->msr, &data); + if (!ret) { + msr_cmd->data = data; + *write_only = 0; + } + } + + + return ret; +} + +static long isst_if_exec_multi_cmd(void __user *argp, struct isst_if_cmd_cb *cb) +{ + unsigned char __user *ptr; + u32 cmd_count; + u8 *cmd_ptr; + long ret; + int i; + + /* Each multi command has u32 command count as the first field */ + if (copy_from_user(&cmd_count, argp, sizeof(cmd_count))) + return -EFAULT; + + if (!cmd_count || cmd_count > ISST_IF_CMD_LIMIT) + return -EINVAL; + + cmd_ptr = kmalloc(cb->cmd_size, GFP_KERNEL); + if (!cmd_ptr) + return -ENOMEM; + + /* cb->offset points to start of the command after the command count */ + ptr = argp + cb->offset; + + for (i = 0; i < cmd_count; ++i) { + int wr_only; + + if (signal_pending(current)) { + ret = -EINTR; + break; + } + + if (copy_from_user(cmd_ptr, ptr, cb->cmd_size)) { + ret = -EFAULT; + break; + } + + ret = cb->cmd_callback(cmd_ptr, &wr_only, 0); + if (ret) + break; + + if (!wr_only && copy_to_user(ptr, cmd_ptr, cb->cmd_size)) { + ret = -EFAULT; + break; + } + + ptr += cb->cmd_size; + } + + kfree(cmd_ptr); + + return i ? i : ret; +} + +static long isst_if_def_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + void __user *argp = (void __user *)arg; + struct isst_if_cmd_cb cmd_cb; + struct isst_if_cmd_cb *cb; + long ret = -ENOTTY; + + switch (cmd) { + case ISST_IF_GET_PLATFORM_INFO: + ret = isst_if_get_platform_info(argp); + break; + case ISST_IF_GET_PHY_ID: + cmd_cb.cmd_size = sizeof(struct isst_if_cpu_map); + cmd_cb.offset = offsetof(struct isst_if_cpu_maps, cpu_map); + cmd_cb.cmd_callback = isst_if_proc_phyid_req; + ret = isst_if_exec_multi_cmd(argp, &cmd_cb); + break; + case ISST_IF_IO_CMD: + cb = &punit_callbacks[ISST_IF_DEV_MMIO]; + if (cb->registered) + ret = isst_if_exec_multi_cmd(argp, cb); + break; + case ISST_IF_MBOX_COMMAND: + cb = &punit_callbacks[ISST_IF_DEV_MBOX]; + if (cb->registered) + ret = isst_if_exec_multi_cmd(argp, cb); + break; + case ISST_IF_MSR_COMMAND: + cmd_cb.cmd_size = sizeof(struct isst_if_msr_cmd); + cmd_cb.offset = offsetof(struct isst_if_msr_cmds, msr_cmd); + cmd_cb.cmd_callback = isst_if_msr_cmd_req; + ret = isst_if_exec_multi_cmd(argp, &cmd_cb); + break; + default: + break; + } + + return ret; +} + +/* Lock to prevent module registration when already opened by user space */ +static DEFINE_MUTEX(punit_misc_dev_open_lock); +/* Lock to allow one share misc device for all ISST interace */ +static DEFINE_MUTEX(punit_misc_dev_reg_lock); +static int misc_usage_count; +static int misc_device_ret; +static int misc_device_open; + +static int isst_if_open(struct inode *inode, struct file *file) +{ + int i, ret = 0; + + /* Fail open, if a module is going away */ + mutex_lock(&punit_misc_dev_open_lock); + for (i = 0; i < ISST_IF_DEV_MAX; ++i) { + struct isst_if_cmd_cb *cb = &punit_callbacks[i]; + + if (cb->registered && !try_module_get(cb->owner)) { + ret = -ENODEV; + break; + } + } + if (ret) { + int j; + + for (j = 0; j < i; ++j) { + struct isst_if_cmd_cb *cb; + + cb = &punit_callbacks[j]; + if (cb->registered) + module_put(cb->owner); + } + } else { + misc_device_open++; + } + mutex_unlock(&punit_misc_dev_open_lock); + + return ret; +} + +static int isst_if_relase(struct inode *inode, struct file *f) +{ + int i; + + mutex_lock(&punit_misc_dev_open_lock); + misc_device_open--; + for (i = 0; i < ISST_IF_DEV_MAX; ++i) { + struct isst_if_cmd_cb *cb = &punit_callbacks[i]; + + if (cb->registered) + module_put(cb->owner); + } + mutex_unlock(&punit_misc_dev_open_lock); + + return 0; +} + +static const struct file_operations isst_if_char_driver_ops = { + .open = isst_if_open, + .unlocked_ioctl = isst_if_def_ioctl, + .release = isst_if_relase, +}; + +static struct miscdevice isst_if_char_driver = { + .minor = MISC_DYNAMIC_MINOR, + .name = "isst_interface", + .fops = &isst_if_char_driver_ops, +}; + +static int isst_misc_reg(void) +{ + mutex_lock(&punit_misc_dev_reg_lock); + if (misc_device_ret) + goto unlock_exit; + + if (!misc_usage_count) { + misc_device_ret = isst_if_cpu_info_init(); + if (misc_device_ret) + goto unlock_exit; + + misc_device_ret = misc_register(&isst_if_char_driver); + if (misc_device_ret) { + isst_if_cpu_info_exit(); + goto unlock_exit; + } + } + misc_usage_count++; + +unlock_exit: + mutex_unlock(&punit_misc_dev_reg_lock); + + return misc_device_ret; +} + +static void isst_misc_unreg(void) +{ + mutex_lock(&punit_misc_dev_reg_lock); + if (misc_usage_count) + misc_usage_count--; + if (!misc_usage_count && !misc_device_ret) { + misc_deregister(&isst_if_char_driver); + isst_if_cpu_info_exit(); + } + mutex_unlock(&punit_misc_dev_reg_lock); +} + +/** + * isst_if_cdev_register() - Register callback for IOCTL + * @device_type: The device type this callback handling. + * @cb: Callback structure. + * + * This function registers a callback to device type. On very first call + * it will register a misc device, which is used for user kernel interface. + * Other calls simply increment ref count. Registry will fail, if the user + * already opened misc device for operation. Also if the misc device + * creation failed, then it will not try again and all callers will get + * failure code. + * + * Return: Return the return value from the misc creation device or -EINVAL + * for unsupported device type. + */ +int isst_if_cdev_register(int device_type, struct isst_if_cmd_cb *cb) +{ + int ret; + + if (device_type >= ISST_IF_DEV_MAX) + return -EINVAL; + + mutex_lock(&punit_misc_dev_open_lock); + /* Device is already open, we don't want to add new callbacks */ + if (misc_device_open) { + mutex_unlock(&punit_misc_dev_open_lock); + return -EAGAIN; + } + memcpy(&punit_callbacks[device_type], cb, sizeof(*cb)); + punit_callbacks[device_type].registered = 1; + mutex_unlock(&punit_misc_dev_open_lock); + + ret = isst_misc_reg(); + if (ret) { + /* + * No need of mutex as the misc device register failed + * as no one can open device yet. Hence no contention. + */ + punit_callbacks[device_type].registered = 0; + return ret; + } + return 0; +} +EXPORT_SYMBOL_GPL(isst_if_cdev_register); + +/** + * isst_if_cdev_unregister() - Unregister callback for IOCTL + * @device_type: The device type to unregister. + * + * This function unregisters the previously registered callback. If this + * is the last callback unregistering, then misc device is removed. + * + * Return: None. + */ +void isst_if_cdev_unregister(int device_type) +{ + isst_misc_unreg(); + mutex_lock(&punit_misc_dev_open_lock); + punit_callbacks[device_type].registered = 0; + if (device_type == ISST_IF_DEV_MBOX) + isst_delete_hash(); + mutex_unlock(&punit_misc_dev_open_lock); +} +EXPORT_SYMBOL_GPL(isst_if_cdev_unregister); + +MODULE_LICENSE("GPL v2"); diff --git a/drivers/platform/x86/intel/speed_select_if/isst_if_common.h b/drivers/platform/x86/intel/speed_select_if/isst_if_common.h new file mode 100644 index 000000000..fdecdae24 --- /dev/null +++ b/drivers/platform/x86/intel/speed_select_if/isst_if_common.h @@ -0,0 +1,72 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Intel Speed Select Interface: Drivers Internal defines + * Copyright (c) 2019, Intel Corporation. + * All rights reserved. + * + * Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> + */ + +#ifndef __ISST_IF_COMMON_H +#define __ISST_IF_COMMON_H + +#define PCI_DEVICE_ID_INTEL_RAPL_PRIO_DEVID_0 0x3451 +#define PCI_DEVICE_ID_INTEL_CFG_MBOX_DEVID_0 0x3459 + +#define PCI_DEVICE_ID_INTEL_RAPL_PRIO_DEVID_1 0x3251 +#define PCI_DEVICE_ID_INTEL_CFG_MBOX_DEVID_1 0x3259 + +/* + * Validate maximum commands in a single request. + * This is enough to handle command to every core in one ioctl, or all + * possible message id to one CPU. Limit is also helpful for resonse time + * per IOCTL request, as PUNIT may take different times to process each + * request and may hold for long for too many commands. + */ +#define ISST_IF_CMD_LIMIT 64 + +#define ISST_IF_API_VERSION 0x01 +#define ISST_IF_DRIVER_VERSION 0x01 + +#define ISST_IF_DEV_MBOX 0 +#define ISST_IF_DEV_MMIO 1 +#define ISST_IF_DEV_MAX 2 + +/** + * struct isst_if_cmd_cb - Used to register a IOCTL handler + * @registered: Used by the common code to store registry. Caller don't + * to touch this field + * @cmd_size: The command size of the individual command in IOCTL + * @offset: Offset to the first valid member in command structure. + * This will be the offset of the start of the command + * after command count field + * @cmd_callback: Callback function to handle IOCTL. The callback has the + * command pointer with data for command. There is a pointer + * called write_only, which when set, will not copy the + * response to user ioctl buffer. The "resume" argument + * can be used to avoid storing the command for replay + * during system resume + * + * This structure is used to register an handler for IOCTL. To avoid + * code duplication common code handles all the IOCTL command read/write + * including handling multiple command in single IOCTL. The caller just + * need to execute a command via the registered callback. + */ +struct isst_if_cmd_cb { + int registered; + int cmd_size; + int offset; + struct module *owner; + long (*cmd_callback)(u8 *ptr, int *write_only, int resume); +}; + +/* Internal interface functions */ +int isst_if_cdev_register(int type, struct isst_if_cmd_cb *cb); +void isst_if_cdev_unregister(int type); +struct pci_dev *isst_if_get_pci_dev(int cpu, int bus, int dev, int fn); +bool isst_if_mbox_cmd_set_req(struct isst_if_mbox_cmd *mbox_cmd); +bool isst_if_mbox_cmd_invalid(struct isst_if_mbox_cmd *cmd); +int isst_store_cmd(int cmd, int sub_command, u32 cpu, int mbox_cmd, + u32 param, u64 data); +void isst_resume_common(void); +#endif diff --git a/drivers/platform/x86/intel/speed_select_if/isst_if_mbox_msr.c b/drivers/platform/x86/intel/speed_select_if/isst_if_mbox_msr.c new file mode 100644 index 000000000..1b6eab071 --- /dev/null +++ b/drivers/platform/x86/intel/speed_select_if/isst_if_mbox_msr.c @@ -0,0 +1,214 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel Speed Select Interface: Mbox via MSR Interface + * Copyright (c) 2019, Intel Corporation. + * All rights reserved. + * + * Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> + */ + +#include <linux/module.h> +#include <linux/cpuhotplug.h> +#include <linux/pci.h> +#include <linux/sched/signal.h> +#include <linux/slab.h> +#include <linux/suspend.h> +#include <linux/topology.h> +#include <linux/uaccess.h> +#include <uapi/linux/isst_if.h> +#include <asm/cpu_device_id.h> +#include <asm/intel-family.h> + +#include "isst_if_common.h" + +#define MSR_OS_MAILBOX_INTERFACE 0xB0 +#define MSR_OS_MAILBOX_DATA 0xB1 +#define MSR_OS_MAILBOX_BUSY_BIT 31 + +/* + * Based on experiments count is never more than 1, as the MSR overhead + * is enough to finish the command. So here this is the worst case number. + */ +#define OS_MAILBOX_RETRY_COUNT 3 + +static int isst_if_send_mbox_cmd(u8 command, u8 sub_command, u32 parameter, + u32 command_data, u32 *response_data) +{ + u32 retries; + u64 data; + int ret; + + /* Poll for rb bit == 0 */ + retries = OS_MAILBOX_RETRY_COUNT; + do { + rdmsrl(MSR_OS_MAILBOX_INTERFACE, data); + if (data & BIT_ULL(MSR_OS_MAILBOX_BUSY_BIT)) { + ret = -EBUSY; + continue; + } + ret = 0; + break; + } while (--retries); + + if (ret) + return ret; + + /* Write DATA register */ + wrmsrl(MSR_OS_MAILBOX_DATA, command_data); + + /* Write command register */ + data = BIT_ULL(MSR_OS_MAILBOX_BUSY_BIT) | + (parameter & GENMASK_ULL(13, 0)) << 16 | + (sub_command << 8) | + command; + wrmsrl(MSR_OS_MAILBOX_INTERFACE, data); + + /* Poll for rb bit == 0 */ + retries = OS_MAILBOX_RETRY_COUNT; + do { + rdmsrl(MSR_OS_MAILBOX_INTERFACE, data); + if (data & BIT_ULL(MSR_OS_MAILBOX_BUSY_BIT)) { + ret = -EBUSY; + continue; + } + + if (data & 0xff) + return -ENXIO; + + if (response_data) { + rdmsrl(MSR_OS_MAILBOX_DATA, data); + *response_data = data; + } + ret = 0; + break; + } while (--retries); + + return ret; +} + +struct msrl_action { + int err; + struct isst_if_mbox_cmd *mbox_cmd; +}; + +/* revisit, smp_call_function_single should be enough for atomic mailbox! */ +static void msrl_update_func(void *info) +{ + struct msrl_action *act = info; + + act->err = isst_if_send_mbox_cmd(act->mbox_cmd->command, + act->mbox_cmd->sub_command, + act->mbox_cmd->parameter, + act->mbox_cmd->req_data, + &act->mbox_cmd->resp_data); +} + +static long isst_if_mbox_proc_cmd(u8 *cmd_ptr, int *write_only, int resume) +{ + struct msrl_action action; + int ret; + + action.mbox_cmd = (struct isst_if_mbox_cmd *)cmd_ptr; + + if (isst_if_mbox_cmd_invalid(action.mbox_cmd)) + return -EINVAL; + + if (isst_if_mbox_cmd_set_req(action.mbox_cmd) && + !capable(CAP_SYS_ADMIN)) + return -EPERM; + + /* + * To complete mailbox command, we need to access two MSRs. + * So we don't want race to complete a mailbox transcation. + * Here smp_call ensures that msrl_update_func() has no race + * and also with wait flag, wait for completion. + * smp_call_function_single is using get_cpu() and put_cpu(). + */ + ret = smp_call_function_single(action.mbox_cmd->logical_cpu, + msrl_update_func, &action, 1); + if (ret) + return ret; + + if (!action.err && !resume && isst_if_mbox_cmd_set_req(action.mbox_cmd)) + action.err = isst_store_cmd(action.mbox_cmd->command, + action.mbox_cmd->sub_command, + action.mbox_cmd->logical_cpu, 1, + action.mbox_cmd->parameter, + action.mbox_cmd->req_data); + *write_only = 0; + + return action.err; +} + + +static int isst_pm_notify(struct notifier_block *nb, + unsigned long mode, void *_unused) +{ + switch (mode) { + case PM_POST_HIBERNATION: + case PM_POST_RESTORE: + case PM_POST_SUSPEND: + isst_resume_common(); + break; + default: + break; + } + return 0; +} + +static struct notifier_block isst_pm_nb = { + .notifier_call = isst_pm_notify, +}; + +static const struct x86_cpu_id isst_if_cpu_ids[] = { + X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_X, NULL), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, isst_if_cpu_ids); + +static int __init isst_if_mbox_init(void) +{ + struct isst_if_cmd_cb cb; + const struct x86_cpu_id *id; + u64 data; + int ret; + + id = x86_match_cpu(isst_if_cpu_ids); + if (!id) + return -ENODEV; + + /* Check presence of mailbox MSRs */ + ret = rdmsrl_safe(MSR_OS_MAILBOX_INTERFACE, &data); + if (ret) + return ret; + + ret = rdmsrl_safe(MSR_OS_MAILBOX_DATA, &data); + if (ret) + return ret; + + memset(&cb, 0, sizeof(cb)); + cb.cmd_size = sizeof(struct isst_if_mbox_cmd); + cb.offset = offsetof(struct isst_if_mbox_cmds, mbox_cmd); + cb.cmd_callback = isst_if_mbox_proc_cmd; + cb.owner = THIS_MODULE; + ret = isst_if_cdev_register(ISST_IF_DEV_MBOX, &cb); + if (ret) + return ret; + + ret = register_pm_notifier(&isst_pm_nb); + if (ret) + isst_if_cdev_unregister(ISST_IF_DEV_MBOX); + + return ret; +} +module_init(isst_if_mbox_init) + +static void __exit isst_if_mbox_exit(void) +{ + unregister_pm_notifier(&isst_pm_nb); + isst_if_cdev_unregister(ISST_IF_DEV_MBOX); +} +module_exit(isst_if_mbox_exit) + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel speed select interface mailbox driver"); diff --git a/drivers/platform/x86/intel/speed_select_if/isst_if_mbox_pci.c b/drivers/platform/x86/intel/speed_select_if/isst_if_mbox_pci.c new file mode 100644 index 000000000..df1fc6c71 --- /dev/null +++ b/drivers/platform/x86/intel/speed_select_if/isst_if_mbox_pci.c @@ -0,0 +1,227 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel Speed Select Interface: Mbox via PCI Interface + * Copyright (c) 2019, Intel Corporation. + * All rights reserved. + * + * Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> + */ + +#include <linux/cpufeature.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/sched/signal.h> +#include <linux/uaccess.h> +#include <uapi/linux/isst_if.h> + +#include "isst_if_common.h" + +#define PUNIT_MAILBOX_DATA 0xA0 +#define PUNIT_MAILBOX_INTERFACE 0xA4 +#define PUNIT_MAILBOX_BUSY_BIT 31 + +/* + * The average time to complete mailbox commands is less than 40us. Most of + * the commands complete in few micro seconds. But the same firmware handles + * requests from all power management features. + * We can create a scenario where we flood the firmware with requests then + * the mailbox response can be delayed for 100s of micro seconds. So define + * two timeouts. One for average case and one for long. + * If the firmware is taking more than average, just call cond_resched(). + */ +#define OS_MAILBOX_TIMEOUT_AVG_US 40 +#define OS_MAILBOX_TIMEOUT_MAX_US 1000 + +struct isst_if_device { + struct mutex mutex; +}; + +static int isst_if_mbox_cmd(struct pci_dev *pdev, + struct isst_if_mbox_cmd *mbox_cmd) +{ + s64 tm_delta = 0; + ktime_t tm; + u32 data; + int ret; + + /* Poll for rb bit == 0 */ + tm = ktime_get(); + do { + ret = pci_read_config_dword(pdev, PUNIT_MAILBOX_INTERFACE, + &data); + if (ret) + return ret; + + if (data & BIT_ULL(PUNIT_MAILBOX_BUSY_BIT)) { + ret = -EBUSY; + tm_delta = ktime_us_delta(ktime_get(), tm); + if (tm_delta > OS_MAILBOX_TIMEOUT_AVG_US) + cond_resched(); + continue; + } + ret = 0; + break; + } while (tm_delta < OS_MAILBOX_TIMEOUT_MAX_US); + + if (ret) + return ret; + + /* Write DATA register */ + ret = pci_write_config_dword(pdev, PUNIT_MAILBOX_DATA, + mbox_cmd->req_data); + if (ret) + return ret; + + /* Write command register */ + data = BIT_ULL(PUNIT_MAILBOX_BUSY_BIT) | + (mbox_cmd->parameter & GENMASK_ULL(13, 0)) << 16 | + (mbox_cmd->sub_command << 8) | + mbox_cmd->command; + + ret = pci_write_config_dword(pdev, PUNIT_MAILBOX_INTERFACE, data); + if (ret) + return ret; + + /* Poll for rb bit == 0 */ + tm_delta = 0; + tm = ktime_get(); + do { + ret = pci_read_config_dword(pdev, PUNIT_MAILBOX_INTERFACE, + &data); + if (ret) + return ret; + + if (data & BIT_ULL(PUNIT_MAILBOX_BUSY_BIT)) { + ret = -EBUSY; + tm_delta = ktime_us_delta(ktime_get(), tm); + if (tm_delta > OS_MAILBOX_TIMEOUT_AVG_US) + cond_resched(); + continue; + } + + if (data & 0xff) + return -ENXIO; + + ret = pci_read_config_dword(pdev, PUNIT_MAILBOX_DATA, &data); + if (ret) + return ret; + + mbox_cmd->resp_data = data; + ret = 0; + break; + } while (tm_delta < OS_MAILBOX_TIMEOUT_MAX_US); + + return ret; +} + +static long isst_if_mbox_proc_cmd(u8 *cmd_ptr, int *write_only, int resume) +{ + struct isst_if_mbox_cmd *mbox_cmd; + struct isst_if_device *punit_dev; + struct pci_dev *pdev; + int ret; + + mbox_cmd = (struct isst_if_mbox_cmd *)cmd_ptr; + + if (isst_if_mbox_cmd_invalid(mbox_cmd)) + return -EINVAL; + + if (isst_if_mbox_cmd_set_req(mbox_cmd) && !capable(CAP_SYS_ADMIN)) + return -EPERM; + + pdev = isst_if_get_pci_dev(mbox_cmd->logical_cpu, 1, 30, 1); + if (!pdev) + return -EINVAL; + + punit_dev = pci_get_drvdata(pdev); + if (!punit_dev) + return -EINVAL; + + /* + * Basically we are allowing one complete mailbox transaction on + * a mapped PCI device at a time. + */ + mutex_lock(&punit_dev->mutex); + ret = isst_if_mbox_cmd(pdev, mbox_cmd); + if (!ret && !resume && isst_if_mbox_cmd_set_req(mbox_cmd)) + ret = isst_store_cmd(mbox_cmd->command, + mbox_cmd->sub_command, + mbox_cmd->logical_cpu, 1, + mbox_cmd->parameter, + mbox_cmd->req_data); + mutex_unlock(&punit_dev->mutex); + if (ret) + return ret; + + *write_only = 0; + + return 0; +} + +static const struct pci_device_id isst_if_mbox_ids[] = { + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CFG_MBOX_DEVID_0)}, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CFG_MBOX_DEVID_1)}, + { 0 }, +}; +MODULE_DEVICE_TABLE(pci, isst_if_mbox_ids); + +static int isst_if_mbox_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct isst_if_device *punit_dev; + struct isst_if_cmd_cb cb; + int ret; + + punit_dev = devm_kzalloc(&pdev->dev, sizeof(*punit_dev), GFP_KERNEL); + if (!punit_dev) + return -ENOMEM; + + ret = pcim_enable_device(pdev); + if (ret) + return ret; + + mutex_init(&punit_dev->mutex); + pci_set_drvdata(pdev, punit_dev); + + memset(&cb, 0, sizeof(cb)); + cb.cmd_size = sizeof(struct isst_if_mbox_cmd); + cb.offset = offsetof(struct isst_if_mbox_cmds, mbox_cmd); + cb.cmd_callback = isst_if_mbox_proc_cmd; + cb.owner = THIS_MODULE; + ret = isst_if_cdev_register(ISST_IF_DEV_MBOX, &cb); + + if (ret) + mutex_destroy(&punit_dev->mutex); + + return ret; +} + +static void isst_if_mbox_remove(struct pci_dev *pdev) +{ + struct isst_if_device *punit_dev; + + punit_dev = pci_get_drvdata(pdev); + isst_if_cdev_unregister(ISST_IF_DEV_MBOX); + mutex_destroy(&punit_dev->mutex); +} + +static int __maybe_unused isst_if_resume(struct device *device) +{ + isst_resume_common(); + return 0; +} + +static SIMPLE_DEV_PM_OPS(isst_if_pm_ops, NULL, isst_if_resume); + +static struct pci_driver isst_if_pci_driver = { + .name = "isst_if_mbox_pci", + .id_table = isst_if_mbox_ids, + .probe = isst_if_mbox_probe, + .remove = isst_if_mbox_remove, + .driver.pm = &isst_if_pm_ops, +}; + +module_pci_driver(isst_if_pci_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel speed select interface pci mailbox driver"); diff --git a/drivers/platform/x86/intel/speed_select_if/isst_if_mmio.c b/drivers/platform/x86/intel/speed_select_if/isst_if_mmio.c new file mode 100644 index 000000000..ff49025ec --- /dev/null +++ b/drivers/platform/x86/intel/speed_select_if/isst_if_mmio.c @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel Speed Select Interface: MMIO Interface + * Copyright (c) 2019, Intel Corporation. + * All rights reserved. + * + * Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> + */ + +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/sched/signal.h> +#include <linux/uaccess.h> +#include <uapi/linux/isst_if.h> + +#include "isst_if_common.h" + +struct isst_mmio_range { + int beg; + int end; +}; + +static struct isst_mmio_range mmio_range_devid_0[] = { + {0x04, 0x14}, + {0x20, 0xD0}, +}; + +static struct isst_mmio_range mmio_range_devid_1[] = { + {0x04, 0x14}, + {0x20, 0x11C}, +}; + +struct isst_if_device { + void __iomem *punit_mmio; + u32 range_0[5]; + u32 range_1[64]; + struct isst_mmio_range *mmio_range; + struct mutex mutex; +}; + +static long isst_if_mmio_rd_wr(u8 *cmd_ptr, int *write_only, int resume) +{ + struct isst_if_device *punit_dev; + struct isst_if_io_reg *io_reg; + struct pci_dev *pdev; + + io_reg = (struct isst_if_io_reg *)cmd_ptr; + + if (io_reg->reg % 4) + return -EINVAL; + + if (io_reg->read_write && !capable(CAP_SYS_ADMIN)) + return -EPERM; + + pdev = isst_if_get_pci_dev(io_reg->logical_cpu, 0, 0, 1); + if (!pdev) + return -EINVAL; + + punit_dev = pci_get_drvdata(pdev); + if (!punit_dev) + return -EINVAL; + + if (io_reg->reg < punit_dev->mmio_range[0].beg || + io_reg->reg > punit_dev->mmio_range[1].end) + return -EINVAL; + + /* + * Ensure that operation is complete on a PCI device to avoid read + * write race by using per PCI device mutex. + */ + mutex_lock(&punit_dev->mutex); + if (io_reg->read_write) { + writel(io_reg->value, punit_dev->punit_mmio+io_reg->reg); + *write_only = 1; + } else { + io_reg->value = readl(punit_dev->punit_mmio+io_reg->reg); + *write_only = 0; + } + mutex_unlock(&punit_dev->mutex); + + return 0; +} + +static const struct pci_device_id isst_if_ids[] = { + { PCI_DEVICE_DATA(INTEL, RAPL_PRIO_DEVID_0, &mmio_range_devid_0)}, + { PCI_DEVICE_DATA(INTEL, RAPL_PRIO_DEVID_1, &mmio_range_devid_1)}, + { 0 }, +}; +MODULE_DEVICE_TABLE(pci, isst_if_ids); + +static int isst_if_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct isst_if_device *punit_dev; + struct isst_if_cmd_cb cb; + u32 mmio_base, pcu_base; + u64 base_addr; + int ret; + + punit_dev = devm_kzalloc(&pdev->dev, sizeof(*punit_dev), GFP_KERNEL); + if (!punit_dev) + return -ENOMEM; + + ret = pcim_enable_device(pdev); + if (ret) + return ret; + + ret = pci_read_config_dword(pdev, 0xD0, &mmio_base); + if (ret) + return ret; + + ret = pci_read_config_dword(pdev, 0xFC, &pcu_base); + if (ret) + return ret; + + pcu_base &= GENMASK(10, 0); + base_addr = (u64)mmio_base << 23 | (u64) pcu_base << 12; + punit_dev->punit_mmio = devm_ioremap(&pdev->dev, base_addr, 256); + if (!punit_dev->punit_mmio) + return -ENOMEM; + + mutex_init(&punit_dev->mutex); + pci_set_drvdata(pdev, punit_dev); + punit_dev->mmio_range = (struct isst_mmio_range *) ent->driver_data; + + memset(&cb, 0, sizeof(cb)); + cb.cmd_size = sizeof(struct isst_if_io_reg); + cb.offset = offsetof(struct isst_if_io_regs, io_reg); + cb.cmd_callback = isst_if_mmio_rd_wr; + cb.owner = THIS_MODULE; + ret = isst_if_cdev_register(ISST_IF_DEV_MMIO, &cb); + if (ret) + mutex_destroy(&punit_dev->mutex); + + return ret; +} + +static void isst_if_remove(struct pci_dev *pdev) +{ + struct isst_if_device *punit_dev; + + punit_dev = pci_get_drvdata(pdev); + isst_if_cdev_unregister(ISST_IF_DEV_MMIO); + mutex_destroy(&punit_dev->mutex); +} + +static int __maybe_unused isst_if_suspend(struct device *device) +{ + struct isst_if_device *punit_dev = dev_get_drvdata(device); + int i; + + for (i = 0; i < ARRAY_SIZE(punit_dev->range_0); ++i) + punit_dev->range_0[i] = readl(punit_dev->punit_mmio + + punit_dev->mmio_range[0].beg + 4 * i); + for (i = 0; i < ARRAY_SIZE(punit_dev->range_1); ++i) { + u32 addr; + + addr = punit_dev->mmio_range[1].beg + 4 * i; + if (addr > punit_dev->mmio_range[1].end) + break; + punit_dev->range_1[i] = readl(punit_dev->punit_mmio + addr); + } + + return 0; +} + +static int __maybe_unused isst_if_resume(struct device *device) +{ + struct isst_if_device *punit_dev = dev_get_drvdata(device); + int i; + + for (i = 0; i < ARRAY_SIZE(punit_dev->range_0); ++i) + writel(punit_dev->range_0[i], punit_dev->punit_mmio + + punit_dev->mmio_range[0].beg + 4 * i); + for (i = 0; i < ARRAY_SIZE(punit_dev->range_1); ++i) { + u32 addr; + + addr = punit_dev->mmio_range[1].beg + 4 * i; + if (addr > punit_dev->mmio_range[1].end) + break; + + writel(punit_dev->range_1[i], punit_dev->punit_mmio + addr); + } + + return 0; +} + +static SIMPLE_DEV_PM_OPS(isst_if_pm_ops, isst_if_suspend, isst_if_resume); + +static struct pci_driver isst_if_pci_driver = { + .name = "isst_if_pci", + .id_table = isst_if_ids, + .probe = isst_if_probe, + .remove = isst_if_remove, + .driver.pm = &isst_if_pm_ops, +}; + +module_pci_driver(isst_if_pci_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel speed select interface mmio driver"); diff --git a/drivers/platform/x86/intel/telemetry/Kconfig b/drivers/platform/x86/intel/telemetry/Kconfig new file mode 100644 index 000000000..da887bd03 --- /dev/null +++ b/drivers/platform/x86/intel/telemetry/Kconfig @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Intel x86 Platform Specific Drivers +# + +config INTEL_TELEMETRY + tristate "Intel SoC Telemetry driver" + depends on X86_64 + depends on MFD_INTEL_PMC_BXT + depends on INTEL_PUNIT_IPC + help + This driver provides interfaces to configure and use + telemetry for Intel SoC from Apollo Lake onwards. + It is also used to get various SoC events and parameters + directly via debugfs files. Various tools may use + this interface for SoC state monitoring. diff --git a/drivers/platform/x86/intel/telemetry/Makefile b/drivers/platform/x86/intel/telemetry/Makefile new file mode 100644 index 000000000..bfdba5b6c --- /dev/null +++ b/drivers/platform/x86/intel/telemetry/Makefile @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Intel x86 Platform Specific Drivers +# + +intel_telemetry_core-y := core.o +obj-$(CONFIG_INTEL_TELEMETRY) += intel_telemetry_core.o +intel_telemetry_pltdrv-y := pltdrv.o +obj-$(CONFIG_INTEL_TELEMETRY) += intel_telemetry_pltdrv.o +intel_telemetry_debugfs-y := debugfs.o +obj-$(CONFIG_INTEL_TELEMETRY) += intel_telemetry_debugfs.o diff --git a/drivers/platform/x86/intel/telemetry/core.c b/drivers/platform/x86/intel/telemetry/core.c new file mode 100644 index 000000000..e4be40f73 --- /dev/null +++ b/drivers/platform/x86/intel/telemetry/core.c @@ -0,0 +1,450 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel SoC Core Telemetry Driver + * Copyright (C) 2015, Intel Corporation. + * All Rights Reserved. + * + * Telemetry Framework provides platform related PM and performance statistics. + * This file provides the core telemetry API implementation. + */ +#include <linux/device.h> +#include <linux/module.h> + +#include <asm/intel_telemetry.h> + +#define DRIVER_NAME "intel_telemetry_core" + +struct telemetry_core_config { + struct telemetry_plt_config *plt_config; + const struct telemetry_core_ops *telem_ops; +}; + +static struct telemetry_core_config telm_core_conf; + +static int telemetry_def_update_events(struct telemetry_evtconfig pss_evtconfig, + struct telemetry_evtconfig ioss_evtconfig) +{ + return 0; +} + +static int telemetry_def_set_sampling_period(u8 pss_period, u8 ioss_period) +{ + return 0; +} + +static int telemetry_def_get_sampling_period(u8 *pss_min_period, + u8 *pss_max_period, + u8 *ioss_min_period, + u8 *ioss_max_period) +{ + return 0; +} + +static int telemetry_def_get_eventconfig( + struct telemetry_evtconfig *pss_evtconfig, + struct telemetry_evtconfig *ioss_evtconfig, + int pss_len, int ioss_len) +{ + return 0; +} + +static int telemetry_def_get_trace_verbosity(enum telemetry_unit telem_unit, + u32 *verbosity) +{ + return 0; +} + + +static int telemetry_def_set_trace_verbosity(enum telemetry_unit telem_unit, + u32 verbosity) +{ + return 0; +} + +static int telemetry_def_raw_read_eventlog(enum telemetry_unit telem_unit, + struct telemetry_evtlog *evtlog, + int len, int log_all_evts) +{ + return 0; +} + +static int telemetry_def_read_eventlog(enum telemetry_unit telem_unit, + struct telemetry_evtlog *evtlog, + int len, int log_all_evts) +{ + return 0; +} + +static int telemetry_def_add_events(u8 num_pss_evts, u8 num_ioss_evts, + u32 *pss_evtmap, u32 *ioss_evtmap) +{ + return 0; +} + +static int telemetry_def_reset_events(void) +{ + return 0; +} + +static const struct telemetry_core_ops telm_defpltops = { + .set_sampling_period = telemetry_def_set_sampling_period, + .get_sampling_period = telemetry_def_get_sampling_period, + .get_trace_verbosity = telemetry_def_get_trace_verbosity, + .set_trace_verbosity = telemetry_def_set_trace_verbosity, + .raw_read_eventlog = telemetry_def_raw_read_eventlog, + .get_eventconfig = telemetry_def_get_eventconfig, + .read_eventlog = telemetry_def_read_eventlog, + .update_events = telemetry_def_update_events, + .reset_events = telemetry_def_reset_events, + .add_events = telemetry_def_add_events, +}; + +/** + * telemetry_update_events() - Update telemetry Configuration + * @pss_evtconfig: PSS related config. No change if num_evts = 0. + * @ioss_evtconfig: IOSS related config. No change if num_evts = 0. + * + * This API updates the IOSS & PSS Telemetry configuration. Old config + * is overwritten. Call telemetry_reset_events when logging is over + * All sample period values should be in the form of: + * bits[6:3] -> value; bits [0:2]-> Exponent; Period = (Value *16^Exponent) + * + * Return: 0 success, < 0 for failure + */ +int telemetry_update_events(struct telemetry_evtconfig pss_evtconfig, + struct telemetry_evtconfig ioss_evtconfig) +{ + return telm_core_conf.telem_ops->update_events(pss_evtconfig, + ioss_evtconfig); +} +EXPORT_SYMBOL_GPL(telemetry_update_events); + + +/** + * telemetry_set_sampling_period() - Sets the IOSS & PSS sampling period + * @pss_period: placeholder for PSS Period to be set. + * Set to 0 if not required to be updated + * @ioss_period: placeholder for IOSS Period to be set + * Set to 0 if not required to be updated + * + * All values should be in the form of: + * bits[6:3] -> value; bits [0:2]-> Exponent; Period = (Value *16^Exponent) + * + * Return: 0 success, < 0 for failure + */ +int telemetry_set_sampling_period(u8 pss_period, u8 ioss_period) +{ + return telm_core_conf.telem_ops->set_sampling_period(pss_period, + ioss_period); +} +EXPORT_SYMBOL_GPL(telemetry_set_sampling_period); + +/** + * telemetry_get_sampling_period() - Get IOSS & PSS min & max sampling period + * @pss_min_period: placeholder for PSS Min Period supported + * @pss_max_period: placeholder for PSS Max Period supported + * @ioss_min_period: placeholder for IOSS Min Period supported + * @ioss_max_period: placeholder for IOSS Max Period supported + * + * All values should be in the form of: + * bits[6:3] -> value; bits [0:2]-> Exponent; Period = (Value *16^Exponent) + * + * Return: 0 success, < 0 for failure + */ +int telemetry_get_sampling_period(u8 *pss_min_period, u8 *pss_max_period, + u8 *ioss_min_period, u8 *ioss_max_period) +{ + return telm_core_conf.telem_ops->get_sampling_period(pss_min_period, + pss_max_period, + ioss_min_period, + ioss_max_period); +} +EXPORT_SYMBOL_GPL(telemetry_get_sampling_period); + + +/** + * telemetry_reset_events() - Restore the IOSS & PSS configuration to default + * + * Return: 0 success, < 0 for failure + */ +int telemetry_reset_events(void) +{ + return telm_core_conf.telem_ops->reset_events(); +} +EXPORT_SYMBOL_GPL(telemetry_reset_events); + +/** + * telemetry_get_eventconfig() - Returns the pss and ioss events enabled + * @pss_evtconfig: Pointer to PSS related configuration. + * @ioss_evtconfig: Pointer to IOSS related configuration. + * @pss_len: Number of u32 elements allocated for pss_evtconfig array + * @ioss_len: Number of u32 elements allocated for ioss_evtconfig array + * + * Return: 0 success, < 0 for failure + */ +int telemetry_get_eventconfig(struct telemetry_evtconfig *pss_evtconfig, + struct telemetry_evtconfig *ioss_evtconfig, + int pss_len, int ioss_len) +{ + return telm_core_conf.telem_ops->get_eventconfig(pss_evtconfig, + ioss_evtconfig, + pss_len, ioss_len); +} +EXPORT_SYMBOL_GPL(telemetry_get_eventconfig); + +/** + * telemetry_add_events() - Add IOSS & PSS configuration to existing settings. + * @num_pss_evts: Number of PSS Events (<29) in pss_evtmap. Can be 0. + * @num_ioss_evts: Number of IOSS Events (<29) in ioss_evtmap. Can be 0. + * @pss_evtmap: Array of PSS Event-IDs to Enable + * @ioss_evtmap: Array of PSS Event-IDs to Enable + * + * Events are appended to Old Configuration. In case of total events > 28, it + * returns error. Call telemetry_reset_events to reset after eventlog done + * + * Return: 0 success, < 0 for failure + */ +int telemetry_add_events(u8 num_pss_evts, u8 num_ioss_evts, + u32 *pss_evtmap, u32 *ioss_evtmap) +{ + return telm_core_conf.telem_ops->add_events(num_pss_evts, + num_ioss_evts, pss_evtmap, + ioss_evtmap); +} +EXPORT_SYMBOL_GPL(telemetry_add_events); + +/** + * telemetry_read_events() - Fetches samples as specified by evtlog.telem_evt_id + * @telem_unit: Specify whether IOSS or PSS Read + * @evtlog: Array of telemetry_evtlog structs to fill data + * evtlog.telem_evt_id specifies the ids to read + * @len: Length of array of evtlog + * + * Return: number of eventlogs read for success, < 0 for failure + */ +int telemetry_read_events(enum telemetry_unit telem_unit, + struct telemetry_evtlog *evtlog, int len) +{ + return telm_core_conf.telem_ops->read_eventlog(telem_unit, evtlog, + len, 0); +} +EXPORT_SYMBOL_GPL(telemetry_read_events); + +/** + * telemetry_raw_read_events() - Fetch samples specified by evtlog.telem_evt_id + * @telem_unit: Specify whether IOSS or PSS Read + * @evtlog: Array of telemetry_evtlog structs to fill data + * evtlog.telem_evt_id specifies the ids to read + * @len: Length of array of evtlog + * + * The caller must take care of locking in this case. + * + * Return: number of eventlogs read for success, < 0 for failure + */ +int telemetry_raw_read_events(enum telemetry_unit telem_unit, + struct telemetry_evtlog *evtlog, int len) +{ + return telm_core_conf.telem_ops->raw_read_eventlog(telem_unit, evtlog, + len, 0); +} +EXPORT_SYMBOL_GPL(telemetry_raw_read_events); + +/** + * telemetry_read_eventlog() - Fetch the Telemetry log from PSS or IOSS + * @telem_unit: Specify whether IOSS or PSS Read + * @evtlog: Array of telemetry_evtlog structs to fill data + * @len: Length of array of evtlog + * + * Return: number of eventlogs read for success, < 0 for failure + */ +int telemetry_read_eventlog(enum telemetry_unit telem_unit, + struct telemetry_evtlog *evtlog, int len) +{ + return telm_core_conf.telem_ops->read_eventlog(telem_unit, evtlog, + len, 1); +} +EXPORT_SYMBOL_GPL(telemetry_read_eventlog); + +/** + * telemetry_raw_read_eventlog() - Fetch the Telemetry log from PSS or IOSS + * @telem_unit: Specify whether IOSS or PSS Read + * @evtlog: Array of telemetry_evtlog structs to fill data + * @len: Length of array of evtlog + * + * The caller must take care of locking in this case. + * + * Return: number of eventlogs read for success, < 0 for failure + */ +int telemetry_raw_read_eventlog(enum telemetry_unit telem_unit, + struct telemetry_evtlog *evtlog, int len) +{ + return telm_core_conf.telem_ops->raw_read_eventlog(telem_unit, evtlog, + len, 1); +} +EXPORT_SYMBOL_GPL(telemetry_raw_read_eventlog); + + +/** + * telemetry_get_trace_verbosity() - Get the IOSS & PSS Trace verbosity + * @telem_unit: Specify whether IOSS or PSS Read + * @verbosity: Pointer to return Verbosity + * + * Return: 0 success, < 0 for failure + */ +int telemetry_get_trace_verbosity(enum telemetry_unit telem_unit, + u32 *verbosity) +{ + return telm_core_conf.telem_ops->get_trace_verbosity(telem_unit, + verbosity); +} +EXPORT_SYMBOL_GPL(telemetry_get_trace_verbosity); + + +/** + * telemetry_set_trace_verbosity() - Update the IOSS & PSS Trace verbosity + * @telem_unit: Specify whether IOSS or PSS Read + * @verbosity: Verbosity to set + * + * Return: 0 success, < 0 for failure + */ +int telemetry_set_trace_verbosity(enum telemetry_unit telem_unit, u32 verbosity) +{ + return telm_core_conf.telem_ops->set_trace_verbosity(telem_unit, + verbosity); +} +EXPORT_SYMBOL_GPL(telemetry_set_trace_verbosity); + +/** + * telemetry_set_pltdata() - Set the platform specific Data + * @ops: Pointer to ops structure + * @pltconfig: Platform config data + * + * Usage by other than telemetry pltdrv module is invalid + * + * Return: 0 success, < 0 for failure + */ +int telemetry_set_pltdata(const struct telemetry_core_ops *ops, + struct telemetry_plt_config *pltconfig) +{ + if (ops) + telm_core_conf.telem_ops = ops; + + if (pltconfig) + telm_core_conf.plt_config = pltconfig; + + return 0; +} +EXPORT_SYMBOL_GPL(telemetry_set_pltdata); + +/** + * telemetry_clear_pltdata() - Clear the platform specific Data + * + * Usage by other than telemetry pltdrv module is invalid + * + * Return: 0 success, < 0 for failure + */ +int telemetry_clear_pltdata(void) +{ + telm_core_conf.telem_ops = &telm_defpltops; + telm_core_conf.plt_config = NULL; + + return 0; +} +EXPORT_SYMBOL_GPL(telemetry_clear_pltdata); + +/** + * telemetry_get_pltdata() - Return telemetry platform config + * + * May be used by other telemetry modules to get platform specific + * configuration. + */ +struct telemetry_plt_config *telemetry_get_pltdata(void) +{ + return telm_core_conf.plt_config; +} +EXPORT_SYMBOL_GPL(telemetry_get_pltdata); + +static inline int telemetry_get_pssevtname(enum telemetry_unit telem_unit, + const char **name, int len) +{ + struct telemetry_unit_config psscfg; + int i; + + if (!telm_core_conf.plt_config) + return -EINVAL; + + psscfg = telm_core_conf.plt_config->pss_config; + + if (len > psscfg.ssram_evts_used) + len = psscfg.ssram_evts_used; + + for (i = 0; i < len; i++) + name[i] = psscfg.telem_evts[i].name; + + return 0; +} + +static inline int telemetry_get_iossevtname(enum telemetry_unit telem_unit, + const char **name, int len) +{ + struct telemetry_unit_config iosscfg; + int i; + + if (!(telm_core_conf.plt_config)) + return -EINVAL; + + iosscfg = telm_core_conf.plt_config->ioss_config; + + if (len > iosscfg.ssram_evts_used) + len = iosscfg.ssram_evts_used; + + for (i = 0; i < len; i++) + name[i] = iosscfg.telem_evts[i].name; + + return 0; + +} + +/** + * telemetry_get_evtname() - Checkif platform config is valid + * @telem_unit: Telemetry Unit to check + * @name: Array of character pointers to contain name + * @len: length of array name provided by user + * + * Usage by other than telemetry debugfs module is invalid + * + * Return: 0 success, < 0 for failure + */ +int telemetry_get_evtname(enum telemetry_unit telem_unit, + const char **name, int len) +{ + int ret = -EINVAL; + + if (telem_unit == TELEM_PSS) + ret = telemetry_get_pssevtname(telem_unit, name, len); + + else if (telem_unit == TELEM_IOSS) + ret = telemetry_get_iossevtname(telem_unit, name, len); + + return ret; +} +EXPORT_SYMBOL_GPL(telemetry_get_evtname); + +static int __init telemetry_module_init(void) +{ + pr_info(pr_fmt(DRIVER_NAME) " Init\n"); + + telm_core_conf.telem_ops = &telm_defpltops; + return 0; +} + +static void __exit telemetry_module_exit(void) +{ +} + +module_init(telemetry_module_init); +module_exit(telemetry_module_exit); + +MODULE_AUTHOR("Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>"); +MODULE_DESCRIPTION("Intel SoC Telemetry Interface"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/platform/x86/intel/telemetry/debugfs.c b/drivers/platform/x86/intel/telemetry/debugfs.c new file mode 100644 index 000000000..1d4d0fbfd --- /dev/null +++ b/drivers/platform/x86/intel/telemetry/debugfs.c @@ -0,0 +1,961 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel SOC Telemetry debugfs Driver: Currently supports APL + * Copyright (c) 2015, Intel Corporation. + * All Rights Reserved. + * + * This file provides the debugfs interfaces for telemetry. + * /sys/kernel/debug/telemetry/pss_info: Shows Primary Control Sub-Sys Counters + * /sys/kernel/debug/telemetry/ioss_info: Shows IO Sub-System Counters + * /sys/kernel/debug/telemetry/soc_states: Shows SoC State + * /sys/kernel/debug/telemetry/pss_trace_verbosity: Read and Change Tracing + * Verbosity via firmware + * /sys/kernel/debug/telemetry/ioss_race_verbosity: Write and Change Tracing + * Verbosity via firmware + */ +#include <linux/debugfs.h> +#include <linux/device.h> +#include <linux/mfd/intel_pmc_bxt.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/seq_file.h> +#include <linux/suspend.h> + +#include <asm/cpu_device_id.h> +#include <asm/intel-family.h> +#include <asm/intel_telemetry.h> + +#define DRIVER_NAME "telemetry_soc_debugfs" +#define DRIVER_VERSION "1.0.0" + +/* ApolloLake SoC Event-IDs */ +#define TELEM_APL_PSS_PSTATES_ID 0x2802 +#define TELEM_APL_PSS_IDLE_ID 0x2806 +#define TELEM_APL_PCS_IDLE_BLOCKED_ID 0x2C00 +#define TELEM_APL_PCS_S0IX_BLOCKED_ID 0x2C01 +#define TELEM_APL_PSS_WAKEUP_ID 0x2C02 +#define TELEM_APL_PSS_LTR_BLOCKING_ID 0x2C03 + +#define TELEM_APL_S0IX_TOTAL_OCC_ID 0x4000 +#define TELEM_APL_S0IX_SHLW_OCC_ID 0x4001 +#define TELEM_APL_S0IX_DEEP_OCC_ID 0x4002 +#define TELEM_APL_S0IX_TOTAL_RES_ID 0x4800 +#define TELEM_APL_S0IX_SHLW_RES_ID 0x4801 +#define TELEM_APL_S0IX_DEEP_RES_ID 0x4802 +#define TELEM_APL_D0IX_ID 0x581A +#define TELEM_APL_D3_ID 0x5819 +#define TELEM_APL_PG_ID 0x5818 + +#define TELEM_INFO_SRAMEVTS_MASK 0xFF00 +#define TELEM_INFO_SRAMEVTS_SHIFT 0x8 +#define TELEM_SSRAM_READ_TIMEOUT 10 + +#define TELEM_MASK_BIT 1 +#define TELEM_MASK_BYTE 0xFF +#define BYTES_PER_LONG 8 +#define TELEM_APL_MASK_PCS_STATE 0xF + +/* Max events in bitmap to check for */ +#define TELEM_PSS_IDLE_EVTS 25 +#define TELEM_PSS_IDLE_BLOCKED_EVTS 20 +#define TELEM_PSS_S0IX_BLOCKED_EVTS 20 +#define TELEM_PSS_S0IX_WAKEUP_EVTS 20 +#define TELEM_PSS_LTR_BLOCKING_EVTS 20 +#define TELEM_IOSS_DX_D0IX_EVTS 25 +#define TELEM_IOSS_PG_EVTS 30 + +#define TELEM_CHECK_AND_PARSE_EVTS(EVTID, EVTNUM, BUF, EVTLOG, EVTDAT, MASK) { \ + if (evtlog[index].telem_evtid == (EVTID)) { \ + for (idx = 0; idx < (EVTNUM); idx++) \ + (BUF)[idx] = ((EVTLOG) >> (EVTDAT)[idx].bit_pos) & \ + (MASK); \ + continue; \ + } \ +} + +#define TELEM_CHECK_AND_PARSE_CTRS(EVTID, CTR) { \ + if (evtlog[index].telem_evtid == (EVTID)) { \ + (CTR) = evtlog[index].telem_evtlog; \ + continue; \ + } \ +} + +static u8 suspend_prep_ok; +static u32 suspend_shlw_ctr_temp, suspend_deep_ctr_temp; +static u64 suspend_shlw_res_temp, suspend_deep_res_temp; + +struct telemetry_susp_stats { + u32 shlw_ctr; + u32 deep_ctr; + u64 shlw_res; + u64 deep_res; +}; + +/* Bitmap definitions for default counters in APL */ +struct telem_pss_idle_stateinfo { + const char *name; + u32 bit_pos; +}; + +static struct telem_pss_idle_stateinfo telem_apl_pss_idle_data[] = { + {"IA_CORE0_C1E", 0}, + {"IA_CORE1_C1E", 1}, + {"IA_CORE2_C1E", 2}, + {"IA_CORE3_C1E", 3}, + {"IA_CORE0_C6", 16}, + {"IA_CORE1_C6", 17}, + {"IA_CORE2_C6", 18}, + {"IA_CORE3_C6", 19}, + {"IA_MODULE0_C7", 32}, + {"IA_MODULE1_C7", 33}, + {"GT_RC6", 40}, + {"IUNIT_PROCESSING_IDLE", 41}, + {"FAR_MEM_IDLE", 43}, + {"DISPLAY_IDLE", 44}, + {"IUNIT_INPUT_SYSTEM_IDLE", 45}, + {"PCS_STATUS", 60}, +}; + +struct telem_pcs_blkd_info { + const char *name; + u32 bit_pos; +}; + +static struct telem_pcs_blkd_info telem_apl_pcs_idle_blkd_data[] = { + {"COMPUTE", 0}, + {"MISC", 8}, + {"MODULE_ACTIONS_PENDING", 16}, + {"LTR", 24}, + {"DISPLAY_WAKE", 32}, + {"ISP_WAKE", 40}, + {"PSF0_ACTIVE", 48}, +}; + +static struct telem_pcs_blkd_info telem_apl_pcs_s0ix_blkd_data[] = { + {"LTR", 0}, + {"IRTL", 8}, + {"WAKE_DEADLINE_PENDING", 16}, + {"DISPLAY", 24}, + {"ISP", 32}, + {"CORE", 40}, + {"PMC", 48}, + {"MISC", 56}, +}; + +struct telem_pss_ltr_info { + const char *name; + u32 bit_pos; +}; + +static struct telem_pss_ltr_info telem_apl_pss_ltr_data[] = { + {"CORE_ACTIVE", 0}, + {"MEM_UP", 8}, + {"DFX", 16}, + {"DFX_FORCE_LTR", 24}, + {"DISPLAY", 32}, + {"ISP", 40}, + {"SOUTH", 48}, +}; + +struct telem_pss_wakeup_info { + const char *name; + u32 bit_pos; +}; + +static struct telem_pss_wakeup_info telem_apl_pss_wakeup[] = { + {"IP_IDLE", 0}, + {"DISPLAY_WAKE", 8}, + {"VOLTAGE_REG_INT", 16}, + {"DROWSY_TIMER (HOTPLUG)", 24}, + {"CORE_WAKE", 32}, + {"MISC_S0IX", 40}, + {"MISC_ABORT", 56}, +}; + +struct telem_ioss_d0ix_stateinfo { + const char *name; + u32 bit_pos; +}; + +static struct telem_ioss_d0ix_stateinfo telem_apl_ioss_d0ix_data[] = { + {"CSE", 0}, + {"SCC2", 1}, + {"GMM", 2}, + {"XDCI", 3}, + {"XHCI", 4}, + {"ISH", 5}, + {"AVS", 6}, + {"PCIE0P1", 7}, + {"PECI0P0", 8}, + {"LPSS", 9}, + {"SCC", 10}, + {"PWM", 11}, + {"PCIE1_P3", 12}, + {"PCIE1_P2", 13}, + {"PCIE1_P1", 14}, + {"PCIE1_P0", 15}, + {"CNV", 16}, + {"SATA", 17}, + {"PRTC", 18}, +}; + +struct telem_ioss_pg_info { + const char *name; + u32 bit_pos; +}; + +static struct telem_ioss_pg_info telem_apl_ioss_pg_data[] = { + {"LPSS", 0}, + {"SCC", 1}, + {"P2SB", 2}, + {"SCC2", 3}, + {"GMM", 4}, + {"PCIE0", 5}, + {"XDCI", 6}, + {"xHCI", 7}, + {"CSE", 8}, + {"SPI", 9}, + {"AVSPGD4", 10}, + {"AVSPGD3", 11}, + {"AVSPGD2", 12}, + {"AVSPGD1", 13}, + {"ISH", 14}, + {"EXI", 15}, + {"NPKVRC", 16}, + {"NPKVNN", 17}, + {"CUNIT", 18}, + {"FUSE_CTRL", 19}, + {"PCIE1", 20}, + {"CNV", 21}, + {"LPC", 22}, + {"SATA", 23}, + {"SMB", 24}, + {"PRTC", 25}, +}; + +struct telemetry_debugfs_conf { + struct telemetry_susp_stats suspend_stats; + struct dentry *telemetry_dbg_dir; + + /* Bitmap Data */ + struct telem_ioss_d0ix_stateinfo *ioss_d0ix_data; + struct telem_pss_idle_stateinfo *pss_idle_data; + struct telem_pcs_blkd_info *pcs_idle_blkd_data; + struct telem_pcs_blkd_info *pcs_s0ix_blkd_data; + struct telem_pss_wakeup_info *pss_wakeup; + struct telem_pss_ltr_info *pss_ltr_data; + struct telem_ioss_pg_info *ioss_pg_data; + u8 pcs_idle_blkd_evts; + u8 pcs_s0ix_blkd_evts; + u8 pss_wakeup_evts; + u8 pss_idle_evts; + u8 pss_ltr_evts; + u8 ioss_d0ix_evts; + u8 ioss_pg_evts; + + /* IDs */ + u16 pss_ltr_blocking_id; + u16 pcs_idle_blkd_id; + u16 pcs_s0ix_blkd_id; + u16 s0ix_total_occ_id; + u16 s0ix_shlw_occ_id; + u16 s0ix_deep_occ_id; + u16 s0ix_total_res_id; + u16 s0ix_shlw_res_id; + u16 s0ix_deep_res_id; + u16 pss_wakeup_id; + u16 ioss_d0ix_id; + u16 pstates_id; + u16 pss_idle_id; + u16 ioss_d3_id; + u16 ioss_pg_id; +}; + +static struct telemetry_debugfs_conf *debugfs_conf; + +static struct telemetry_debugfs_conf telem_apl_debugfs_conf = { + .pss_idle_data = telem_apl_pss_idle_data, + .pcs_idle_blkd_data = telem_apl_pcs_idle_blkd_data, + .pcs_s0ix_blkd_data = telem_apl_pcs_s0ix_blkd_data, + .pss_ltr_data = telem_apl_pss_ltr_data, + .pss_wakeup = telem_apl_pss_wakeup, + .ioss_d0ix_data = telem_apl_ioss_d0ix_data, + .ioss_pg_data = telem_apl_ioss_pg_data, + + .pss_idle_evts = ARRAY_SIZE(telem_apl_pss_idle_data), + .pcs_idle_blkd_evts = ARRAY_SIZE(telem_apl_pcs_idle_blkd_data), + .pcs_s0ix_blkd_evts = ARRAY_SIZE(telem_apl_pcs_s0ix_blkd_data), + .pss_ltr_evts = ARRAY_SIZE(telem_apl_pss_ltr_data), + .pss_wakeup_evts = ARRAY_SIZE(telem_apl_pss_wakeup), + .ioss_d0ix_evts = ARRAY_SIZE(telem_apl_ioss_d0ix_data), + .ioss_pg_evts = ARRAY_SIZE(telem_apl_ioss_pg_data), + + .pstates_id = TELEM_APL_PSS_PSTATES_ID, + .pss_idle_id = TELEM_APL_PSS_IDLE_ID, + .pcs_idle_blkd_id = TELEM_APL_PCS_IDLE_BLOCKED_ID, + .pcs_s0ix_blkd_id = TELEM_APL_PCS_S0IX_BLOCKED_ID, + .pss_wakeup_id = TELEM_APL_PSS_WAKEUP_ID, + .pss_ltr_blocking_id = TELEM_APL_PSS_LTR_BLOCKING_ID, + .s0ix_total_occ_id = TELEM_APL_S0IX_TOTAL_OCC_ID, + .s0ix_shlw_occ_id = TELEM_APL_S0IX_SHLW_OCC_ID, + .s0ix_deep_occ_id = TELEM_APL_S0IX_DEEP_OCC_ID, + .s0ix_total_res_id = TELEM_APL_S0IX_TOTAL_RES_ID, + .s0ix_shlw_res_id = TELEM_APL_S0IX_SHLW_RES_ID, + .s0ix_deep_res_id = TELEM_APL_S0IX_DEEP_RES_ID, + .ioss_d0ix_id = TELEM_APL_D0IX_ID, + .ioss_d3_id = TELEM_APL_D3_ID, + .ioss_pg_id = TELEM_APL_PG_ID, +}; + +static const struct x86_cpu_id telemetry_debugfs_cpu_ids[] = { + X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT, &telem_apl_debugfs_conf), + X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT_PLUS, &telem_apl_debugfs_conf), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, telemetry_debugfs_cpu_ids); + +static int telemetry_debugfs_check_evts(void) +{ + if ((debugfs_conf->pss_idle_evts > TELEM_PSS_IDLE_EVTS) || + (debugfs_conf->pcs_idle_blkd_evts > TELEM_PSS_IDLE_BLOCKED_EVTS) || + (debugfs_conf->pcs_s0ix_blkd_evts > TELEM_PSS_S0IX_BLOCKED_EVTS) || + (debugfs_conf->pss_ltr_evts > TELEM_PSS_LTR_BLOCKING_EVTS) || + (debugfs_conf->pss_wakeup_evts > TELEM_PSS_S0IX_WAKEUP_EVTS) || + (debugfs_conf->ioss_d0ix_evts > TELEM_IOSS_DX_D0IX_EVTS) || + (debugfs_conf->ioss_pg_evts > TELEM_IOSS_PG_EVTS)) + return -EINVAL; + + return 0; +} + +static int telem_pss_states_show(struct seq_file *s, void *unused) +{ + struct telemetry_evtlog evtlog[TELEM_MAX_OS_ALLOCATED_EVENTS]; + struct telemetry_debugfs_conf *conf = debugfs_conf; + const char *name[TELEM_MAX_OS_ALLOCATED_EVENTS]; + u32 pcs_idle_blkd[TELEM_PSS_IDLE_BLOCKED_EVTS], + pcs_s0ix_blkd[TELEM_PSS_S0IX_BLOCKED_EVTS], + pss_s0ix_wakeup[TELEM_PSS_S0IX_WAKEUP_EVTS], + pss_ltr_blkd[TELEM_PSS_LTR_BLOCKING_EVTS], + pss_idle[TELEM_PSS_IDLE_EVTS]; + int index, idx, ret, err = 0; + u64 pstates = 0; + + ret = telemetry_read_eventlog(TELEM_PSS, evtlog, + TELEM_MAX_OS_ALLOCATED_EVENTS); + if (ret < 0) + return ret; + + err = telemetry_get_evtname(TELEM_PSS, name, + TELEM_MAX_OS_ALLOCATED_EVENTS); + if (err < 0) + return err; + + seq_puts(s, "\n----------------------------------------------------\n"); + seq_puts(s, "\tPSS TELEM EVENTLOG (Residency = field/19.2 us\n"); + seq_puts(s, "----------------------------------------------------\n"); + for (index = 0; index < ret; index++) { + seq_printf(s, "%-32s %llu\n", + name[index], evtlog[index].telem_evtlog); + + /* Fetch PSS IDLE State */ + if (evtlog[index].telem_evtid == conf->pss_idle_id) { + pss_idle[conf->pss_idle_evts - 1] = + (evtlog[index].telem_evtlog >> + conf->pss_idle_data[conf->pss_idle_evts - 1].bit_pos) & + TELEM_APL_MASK_PCS_STATE; + } + + TELEM_CHECK_AND_PARSE_EVTS(conf->pss_idle_id, + conf->pss_idle_evts - 1, + pss_idle, evtlog[index].telem_evtlog, + conf->pss_idle_data, TELEM_MASK_BIT); + + TELEM_CHECK_AND_PARSE_EVTS(conf->pcs_idle_blkd_id, + conf->pcs_idle_blkd_evts, + pcs_idle_blkd, + evtlog[index].telem_evtlog, + conf->pcs_idle_blkd_data, + TELEM_MASK_BYTE); + + TELEM_CHECK_AND_PARSE_EVTS(conf->pcs_s0ix_blkd_id, + conf->pcs_s0ix_blkd_evts, + pcs_s0ix_blkd, + evtlog[index].telem_evtlog, + conf->pcs_s0ix_blkd_data, + TELEM_MASK_BYTE); + + TELEM_CHECK_AND_PARSE_EVTS(conf->pss_wakeup_id, + conf->pss_wakeup_evts, + pss_s0ix_wakeup, + evtlog[index].telem_evtlog, + conf->pss_wakeup, TELEM_MASK_BYTE); + + TELEM_CHECK_AND_PARSE_EVTS(conf->pss_ltr_blocking_id, + conf->pss_ltr_evts, pss_ltr_blkd, + evtlog[index].telem_evtlog, + conf->pss_ltr_data, TELEM_MASK_BYTE); + + if (evtlog[index].telem_evtid == debugfs_conf->pstates_id) + pstates = evtlog[index].telem_evtlog; + } + + seq_puts(s, "\n--------------------------------------\n"); + seq_puts(s, "PStates\n"); + seq_puts(s, "--------------------------------------\n"); + seq_puts(s, "Domain\t\t\t\tFreq(Mhz)\n"); + seq_printf(s, " IA\t\t\t\t %llu\n GT\t\t\t\t %llu\n", + (pstates & TELEM_MASK_BYTE)*100, + ((pstates >> 8) & TELEM_MASK_BYTE)*50/3); + + seq_printf(s, " IUNIT\t\t\t\t %llu\n SA\t\t\t\t %llu\n", + ((pstates >> 16) & TELEM_MASK_BYTE)*25, + ((pstates >> 24) & TELEM_MASK_BYTE)*50/3); + + seq_puts(s, "\n--------------------------------------\n"); + seq_puts(s, "PSS IDLE Status\n"); + seq_puts(s, "--------------------------------------\n"); + seq_puts(s, "Device\t\t\t\t\tIDLE\n"); + for (index = 0; index < debugfs_conf->pss_idle_evts; index++) { + seq_printf(s, "%-32s\t%u\n", + debugfs_conf->pss_idle_data[index].name, + pss_idle[index]); + } + + seq_puts(s, "\n--------------------------------------\n"); + seq_puts(s, "PSS Idle blkd Status (~1ms saturating bucket)\n"); + seq_puts(s, "--------------------------------------\n"); + seq_puts(s, "Blocker\t\t\t\t\tCount\n"); + for (index = 0; index < debugfs_conf->pcs_idle_blkd_evts; index++) { + seq_printf(s, "%-32s\t%u\n", + debugfs_conf->pcs_idle_blkd_data[index].name, + pcs_idle_blkd[index]); + } + + seq_puts(s, "\n--------------------------------------\n"); + seq_puts(s, "PSS S0ix blkd Status (~1ms saturating bucket)\n"); + seq_puts(s, "--------------------------------------\n"); + seq_puts(s, "Blocker\t\t\t\t\tCount\n"); + for (index = 0; index < debugfs_conf->pcs_s0ix_blkd_evts; index++) { + seq_printf(s, "%-32s\t%u\n", + debugfs_conf->pcs_s0ix_blkd_data[index].name, + pcs_s0ix_blkd[index]); + } + + seq_puts(s, "\n--------------------------------------\n"); + seq_puts(s, "LTR Blocking Status (~1ms saturating bucket)\n"); + seq_puts(s, "--------------------------------------\n"); + seq_puts(s, "Blocker\t\t\t\t\tCount\n"); + for (index = 0; index < debugfs_conf->pss_ltr_evts; index++) { + seq_printf(s, "%-32s\t%u\n", + debugfs_conf->pss_ltr_data[index].name, + pss_s0ix_wakeup[index]); + } + + seq_puts(s, "\n--------------------------------------\n"); + seq_puts(s, "Wakes Status (~1ms saturating bucket)\n"); + seq_puts(s, "--------------------------------------\n"); + seq_puts(s, "Wakes\t\t\t\t\tCount\n"); + for (index = 0; index < debugfs_conf->pss_wakeup_evts; index++) { + seq_printf(s, "%-32s\t%u\n", + debugfs_conf->pss_wakeup[index].name, + pss_ltr_blkd[index]); + } + + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(telem_pss_states); + +static int telem_ioss_states_show(struct seq_file *s, void *unused) +{ + struct telemetry_evtlog evtlog[TELEM_MAX_OS_ALLOCATED_EVENTS]; + const char *name[TELEM_MAX_OS_ALLOCATED_EVENTS]; + int index, ret, err; + + ret = telemetry_read_eventlog(TELEM_IOSS, evtlog, + TELEM_MAX_OS_ALLOCATED_EVENTS); + if (ret < 0) + return ret; + + err = telemetry_get_evtname(TELEM_IOSS, name, + TELEM_MAX_OS_ALLOCATED_EVENTS); + if (err < 0) + return err; + + seq_puts(s, "--------------------------------------\n"); + seq_puts(s, "\tI0SS TELEMETRY EVENTLOG\n"); + seq_puts(s, "--------------------------------------\n"); + for (index = 0; index < ret; index++) { + seq_printf(s, "%-32s 0x%llx\n", + name[index], evtlog[index].telem_evtlog); + } + + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(telem_ioss_states); + +static int telem_soc_states_show(struct seq_file *s, void *unused) +{ + u32 d3_sts[TELEM_IOSS_DX_D0IX_EVTS], d0ix_sts[TELEM_IOSS_DX_D0IX_EVTS]; + u32 pg_sts[TELEM_IOSS_PG_EVTS], pss_idle[TELEM_PSS_IDLE_EVTS]; + struct telemetry_evtlog evtlog[TELEM_MAX_OS_ALLOCATED_EVENTS]; + u32 s0ix_total_ctr = 0, s0ix_shlw_ctr = 0, s0ix_deep_ctr = 0; + u64 s0ix_total_res = 0, s0ix_shlw_res = 0, s0ix_deep_res = 0; + struct telemetry_debugfs_conf *conf = debugfs_conf; + struct pci_dev *dev = NULL; + int index, idx, ret; + u32 d3_state; + u16 pmcsr; + + ret = telemetry_read_eventlog(TELEM_IOSS, evtlog, + TELEM_MAX_OS_ALLOCATED_EVENTS); + if (ret < 0) + return ret; + + for (index = 0; index < ret; index++) { + TELEM_CHECK_AND_PARSE_EVTS(conf->ioss_d3_id, + conf->ioss_d0ix_evts, + d3_sts, evtlog[index].telem_evtlog, + conf->ioss_d0ix_data, + TELEM_MASK_BIT); + + TELEM_CHECK_AND_PARSE_EVTS(conf->ioss_pg_id, conf->ioss_pg_evts, + pg_sts, evtlog[index].telem_evtlog, + conf->ioss_pg_data, TELEM_MASK_BIT); + + TELEM_CHECK_AND_PARSE_EVTS(conf->ioss_d0ix_id, + conf->ioss_d0ix_evts, + d0ix_sts, evtlog[index].telem_evtlog, + conf->ioss_d0ix_data, + TELEM_MASK_BIT); + + TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_total_occ_id, + s0ix_total_ctr); + + TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_shlw_occ_id, + s0ix_shlw_ctr); + + TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_deep_occ_id, + s0ix_deep_ctr); + + TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_total_res_id, + s0ix_total_res); + + TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_shlw_res_id, + s0ix_shlw_res); + + TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_deep_res_id, + s0ix_deep_res); + } + + seq_puts(s, "\n---------------------------------------------------\n"); + seq_puts(s, "S0IX Type\t\t\t Occurrence\t\t Residency(us)\n"); + seq_puts(s, "---------------------------------------------------\n"); + + seq_printf(s, "S0IX Shallow\t\t\t %10u\t %10llu\n", + s0ix_shlw_ctr - + conf->suspend_stats.shlw_ctr, + (u64)((s0ix_shlw_res - + conf->suspend_stats.shlw_res)*10/192)); + + seq_printf(s, "S0IX Deep\t\t\t %10u\t %10llu\n", + s0ix_deep_ctr - + conf->suspend_stats.deep_ctr, + (u64)((s0ix_deep_res - + conf->suspend_stats.deep_res)*10/192)); + + seq_printf(s, "Suspend(With S0ixShallow)\t %10u\t %10llu\n", + conf->suspend_stats.shlw_ctr, + (u64)(conf->suspend_stats.shlw_res*10)/192); + + seq_printf(s, "Suspend(With S0ixDeep)\t\t %10u\t %10llu\n", + conf->suspend_stats.deep_ctr, + (u64)(conf->suspend_stats.deep_res*10)/192); + + seq_printf(s, "TOTAL S0IX\t\t\t %10u\t %10llu\n", s0ix_total_ctr, + (u64)(s0ix_total_res*10/192)); + seq_puts(s, "\n-------------------------------------------------\n"); + seq_puts(s, "\t\tDEVICE STATES\n"); + seq_puts(s, "-------------------------------------------------\n"); + + for_each_pci_dev(dev) { + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); + d3_state = ((pmcsr & PCI_PM_CTRL_STATE_MASK) == + (__force int)PCI_D3hot) ? 1 : 0; + + seq_printf(s, "pci %04x %04X %s %20.20s: ", + dev->vendor, dev->device, dev_name(&dev->dev), + dev_driver_string(&dev->dev)); + seq_printf(s, " d3:%x\n", d3_state); + } + + seq_puts(s, "\n--------------------------------------\n"); + seq_puts(s, "D3/D0i3 Status\n"); + seq_puts(s, "--------------------------------------\n"); + seq_puts(s, "Block\t\t D3\t D0i3\n"); + for (index = 0; index < conf->ioss_d0ix_evts; index++) { + seq_printf(s, "%-10s\t %u\t %u\n", + conf->ioss_d0ix_data[index].name, + d3_sts[index], d0ix_sts[index]); + } + + seq_puts(s, "\n--------------------------------------\n"); + seq_puts(s, "South Complex PowerGate Status\n"); + seq_puts(s, "--------------------------------------\n"); + seq_puts(s, "Device\t\t PG\n"); + for (index = 0; index < conf->ioss_pg_evts; index++) { + seq_printf(s, "%-10s\t %u\n", + conf->ioss_pg_data[index].name, + pg_sts[index]); + } + + evtlog->telem_evtid = conf->pss_idle_id; + ret = telemetry_read_events(TELEM_PSS, evtlog, 1); + if (ret < 0) + return ret; + + seq_puts(s, "\n-----------------------------------------\n"); + seq_puts(s, "North Idle Status\n"); + seq_puts(s, "-----------------------------------------\n"); + for (idx = 0; idx < conf->pss_idle_evts - 1; idx++) { + pss_idle[idx] = (evtlog->telem_evtlog >> + conf->pss_idle_data[idx].bit_pos) & + TELEM_MASK_BIT; + } + + pss_idle[idx] = (evtlog->telem_evtlog >> + conf->pss_idle_data[idx].bit_pos) & + TELEM_APL_MASK_PCS_STATE; + + for (index = 0; index < conf->pss_idle_evts; index++) { + seq_printf(s, "%-30s %u\n", + conf->pss_idle_data[index].name, + pss_idle[index]); + } + + seq_puts(s, "\nPCS_STATUS Code\n"); + seq_puts(s, "0:C0 1:C1 2:C1_DN_WT_DEV 3:C2 4:C2_WT_DE_MEM_UP\n"); + seq_puts(s, "5:C2_WT_DE_MEM_DOWN 6:C2_UP_WT_DEV 7:C2_DN 8:C2_VOA\n"); + seq_puts(s, "9:C2_VOA_UP 10:S0IX_PRE 11:S0IX\n"); + + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(telem_soc_states); + +static int telem_s0ix_res_get(void *data, u64 *val) +{ + struct telemetry_plt_config *plt_config = telemetry_get_pltdata(); + u64 s0ix_total_res; + int ret; + + ret = intel_pmc_s0ix_counter_read(plt_config->pmc, &s0ix_total_res); + if (ret) { + pr_err("Failed to read S0ix residency"); + return ret; + } + + *val = s0ix_total_res; + + return 0; +} + +DEFINE_DEBUGFS_ATTRIBUTE(telem_s0ix_fops, telem_s0ix_res_get, NULL, "%llu\n"); + +static int telem_pss_trc_verb_show(struct seq_file *s, void *unused) +{ + u32 verbosity; + int err; + + err = telemetry_get_trace_verbosity(TELEM_PSS, &verbosity); + if (err) { + pr_err("Get PSS Trace Verbosity Failed with Error %d\n", err); + return -EFAULT; + } + + seq_printf(s, "PSS Trace Verbosity %u\n", verbosity); + return 0; +} + +static ssize_t telem_pss_trc_verb_write(struct file *file, + const char __user *userbuf, + size_t count, loff_t *ppos) +{ + u32 verbosity; + int err; + + err = kstrtou32_from_user(userbuf, count, 0, &verbosity); + if (err) + return err; + + err = telemetry_set_trace_verbosity(TELEM_PSS, verbosity); + if (err) { + pr_err("Changing PSS Trace Verbosity Failed. Error %d\n", err); + return err; + } + + return count; +} + +static int telem_pss_trc_verb_open(struct inode *inode, struct file *file) +{ + return single_open(file, telem_pss_trc_verb_show, inode->i_private); +} + +static const struct file_operations telem_pss_trc_verb_ops = { + .open = telem_pss_trc_verb_open, + .read = seq_read, + .write = telem_pss_trc_verb_write, + .llseek = seq_lseek, + .release = single_release, +}; + +static int telem_ioss_trc_verb_show(struct seq_file *s, void *unused) +{ + u32 verbosity; + int err; + + err = telemetry_get_trace_verbosity(TELEM_IOSS, &verbosity); + if (err) { + pr_err("Get IOSS Trace Verbosity Failed with Error %d\n", err); + return -EFAULT; + } + + seq_printf(s, "IOSS Trace Verbosity %u\n", verbosity); + return 0; +} + +static ssize_t telem_ioss_trc_verb_write(struct file *file, + const char __user *userbuf, + size_t count, loff_t *ppos) +{ + u32 verbosity; + int err; + + err = kstrtou32_from_user(userbuf, count, 0, &verbosity); + if (err) + return err; + + err = telemetry_set_trace_verbosity(TELEM_IOSS, verbosity); + if (err) { + pr_err("Changing IOSS Trace Verbosity Failed. Error %d\n", err); + return err; + } + + return count; +} + +static int telem_ioss_trc_verb_open(struct inode *inode, struct file *file) +{ + return single_open(file, telem_ioss_trc_verb_show, inode->i_private); +} + +static const struct file_operations telem_ioss_trc_verb_ops = { + .open = telem_ioss_trc_verb_open, + .read = seq_read, + .write = telem_ioss_trc_verb_write, + .llseek = seq_lseek, + .release = single_release, +}; + +static int pm_suspend_prep_cb(void) +{ + struct telemetry_evtlog evtlog[TELEM_MAX_OS_ALLOCATED_EVENTS]; + struct telemetry_debugfs_conf *conf = debugfs_conf; + int ret, index; + + ret = telemetry_raw_read_eventlog(TELEM_IOSS, evtlog, + TELEM_MAX_OS_ALLOCATED_EVENTS); + if (ret < 0) { + suspend_prep_ok = 0; + goto out; + } + + for (index = 0; index < ret; index++) { + + TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_shlw_occ_id, + suspend_shlw_ctr_temp); + + TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_deep_occ_id, + suspend_deep_ctr_temp); + + TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_shlw_res_id, + suspend_shlw_res_temp); + + TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_deep_res_id, + suspend_deep_res_temp); + } + suspend_prep_ok = 1; +out: + return NOTIFY_OK; +} + +static int pm_suspend_exit_cb(void) +{ + struct telemetry_evtlog evtlog[TELEM_MAX_OS_ALLOCATED_EVENTS]; + static u32 suspend_shlw_ctr_exit, suspend_deep_ctr_exit; + static u64 suspend_shlw_res_exit, suspend_deep_res_exit; + struct telemetry_debugfs_conf *conf = debugfs_conf; + int ret, index; + + if (!suspend_prep_ok) + goto out; + + ret = telemetry_raw_read_eventlog(TELEM_IOSS, evtlog, + TELEM_MAX_OS_ALLOCATED_EVENTS); + if (ret < 0) + goto out; + + for (index = 0; index < ret; index++) { + TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_shlw_occ_id, + suspend_shlw_ctr_exit); + + TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_deep_occ_id, + suspend_deep_ctr_exit); + + TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_shlw_res_id, + suspend_shlw_res_exit); + + TELEM_CHECK_AND_PARSE_CTRS(conf->s0ix_deep_res_id, + suspend_deep_res_exit); + } + + if ((suspend_shlw_ctr_exit < suspend_shlw_ctr_temp) || + (suspend_deep_ctr_exit < suspend_deep_ctr_temp) || + (suspend_shlw_res_exit < suspend_shlw_res_temp) || + (suspend_deep_res_exit < suspend_deep_res_temp)) { + pr_err("Wrong s0ix counters detected\n"); + goto out; + } + + /* + * Due to some design limitations in the firmware, sometimes the + * counters do not get updated by the time we reach here. As a + * workaround, we try to see if this was a genuine case of sleep + * failure or not by cross-checking from PMC GCR registers directly. + */ + if (suspend_shlw_ctr_exit == suspend_shlw_ctr_temp && + suspend_deep_ctr_exit == suspend_deep_ctr_temp) { + struct telemetry_plt_config *plt_config = telemetry_get_pltdata(); + struct intel_pmc_dev *pmc = plt_config->pmc; + + ret = intel_pmc_gcr_read64(pmc, PMC_GCR_TELEM_SHLW_S0IX_REG, + &suspend_shlw_res_exit); + if (ret < 0) + goto out; + + ret = intel_pmc_gcr_read64(pmc, PMC_GCR_TELEM_DEEP_S0IX_REG, + &suspend_deep_res_exit); + if (ret < 0) + goto out; + + if (suspend_shlw_res_exit > suspend_shlw_res_temp) + suspend_shlw_ctr_exit++; + + if (suspend_deep_res_exit > suspend_deep_res_temp) + suspend_deep_ctr_exit++; + } + + suspend_shlw_ctr_exit -= suspend_shlw_ctr_temp; + suspend_deep_ctr_exit -= suspend_deep_ctr_temp; + suspend_shlw_res_exit -= suspend_shlw_res_temp; + suspend_deep_res_exit -= suspend_deep_res_temp; + + if (suspend_shlw_ctr_exit != 0) { + conf->suspend_stats.shlw_ctr += + suspend_shlw_ctr_exit; + + conf->suspend_stats.shlw_res += + suspend_shlw_res_exit; + } + + if (suspend_deep_ctr_exit != 0) { + conf->suspend_stats.deep_ctr += + suspend_deep_ctr_exit; + + conf->suspend_stats.deep_res += + suspend_deep_res_exit; + } + +out: + suspend_prep_ok = 0; + return NOTIFY_OK; +} + +static int pm_notification(struct notifier_block *this, + unsigned long event, void *ptr) +{ + switch (event) { + case PM_SUSPEND_PREPARE: + return pm_suspend_prep_cb(); + case PM_POST_SUSPEND: + return pm_suspend_exit_cb(); + } + + return NOTIFY_DONE; +} + +static struct notifier_block pm_notifier = { + .notifier_call = pm_notification, +}; + +static int __init telemetry_debugfs_init(void) +{ + const struct x86_cpu_id *id; + int err; + struct dentry *dir; + + /* Only APL supported for now */ + id = x86_match_cpu(telemetry_debugfs_cpu_ids); + if (!id) + return -ENODEV; + + debugfs_conf = (struct telemetry_debugfs_conf *)id->driver_data; + + if (!telemetry_get_pltdata()) { + pr_info("Invalid pltconfig, ensure IPC1 device is enabled in BIOS\n"); + return -ENODEV; + } + + err = telemetry_debugfs_check_evts(); + if (err < 0) { + pr_info("telemetry_debugfs_check_evts failed\n"); + return -EINVAL; + } + + register_pm_notifier(&pm_notifier); + + dir = debugfs_create_dir("telemetry", NULL); + debugfs_conf->telemetry_dbg_dir = dir; + + debugfs_create_file("pss_info", S_IFREG | S_IRUGO, dir, NULL, + &telem_pss_states_fops); + debugfs_create_file("ioss_info", S_IFREG | S_IRUGO, dir, NULL, + &telem_ioss_states_fops); + debugfs_create_file("soc_states", S_IFREG | S_IRUGO, dir, NULL, + &telem_soc_states_fops); + debugfs_create_file("s0ix_residency_usec", S_IFREG | S_IRUGO, dir, NULL, + &telem_s0ix_fops); + debugfs_create_file("pss_trace_verbosity", S_IFREG | S_IRUGO, dir, NULL, + &telem_pss_trc_verb_ops); + debugfs_create_file("ioss_trace_verbosity", S_IFREG | S_IRUGO, dir, + NULL, &telem_ioss_trc_verb_ops); + return 0; +} + +static void __exit telemetry_debugfs_exit(void) +{ + debugfs_remove_recursive(debugfs_conf->telemetry_dbg_dir); + debugfs_conf->telemetry_dbg_dir = NULL; + unregister_pm_notifier(&pm_notifier); +} + +late_initcall(telemetry_debugfs_init); +module_exit(telemetry_debugfs_exit); + +MODULE_AUTHOR("Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>"); +MODULE_DESCRIPTION("Intel SoC Telemetry debugfs Interface"); +MODULE_VERSION(DRIVER_VERSION); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/platform/x86/intel/telemetry/pltdrv.c b/drivers/platform/x86/intel/telemetry/pltdrv.c new file mode 100644 index 000000000..405dea87d --- /dev/null +++ b/drivers/platform/x86/intel/telemetry/pltdrv.c @@ -0,0 +1,1189 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel SOC Telemetry Platform Driver: Currently supports APL + * Copyright (c) 2015, Intel Corporation. + * All Rights Reserved. + * + * This file provides the platform specific telemetry implementation for APL. + * It used the PUNIT and PMC IPC interfaces for configuring the counters. + * The accumulated results are fetched from SRAM. + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include <asm/cpu_device_id.h> +#include <asm/intel-family.h> +#include <asm/intel_punit_ipc.h> +#include <asm/intel_telemetry.h> + +#define DRIVER_NAME "intel_telemetry" +#define DRIVER_VERSION "1.0.0" + +#define TELEM_TRC_VERBOSITY_MASK 0x3 + +#define TELEM_MIN_PERIOD(x) ((x) & 0x7F0000) +#define TELEM_MAX_PERIOD(x) ((x) & 0x7F000000) +#define TELEM_SAMPLE_PERIOD_INVALID(x) ((x) & (BIT(7))) +#define TELEM_CLEAR_SAMPLE_PERIOD(x) ((x) &= ~0x7F) + +#define TELEM_SAMPLING_DEFAULT_PERIOD 0xD + +#define TELEM_MAX_EVENTS_SRAM 28 +#define TELEM_SSRAM_STARTTIME_OFFSET 8 +#define TELEM_SSRAM_EVTLOG_OFFSET 16 + +#define IOSS_TELEM 0xeb +#define IOSS_TELEM_EVENT_READ 0x0 +#define IOSS_TELEM_EVENT_WRITE 0x1 +#define IOSS_TELEM_INFO_READ 0x2 +#define IOSS_TELEM_TRACE_CTL_READ 0x5 +#define IOSS_TELEM_TRACE_CTL_WRITE 0x6 +#define IOSS_TELEM_EVENT_CTL_READ 0x7 +#define IOSS_TELEM_EVENT_CTL_WRITE 0x8 +#define IOSS_TELEM_EVT_WRITE_SIZE 0x3 + +#define TELEM_INFO_SRAMEVTS_MASK 0xFF00 +#define TELEM_INFO_SRAMEVTS_SHIFT 0x8 +#define TELEM_SSRAM_READ_TIMEOUT 10 + +#define TELEM_INFO_NENABLES_MASK 0xFF +#define TELEM_EVENT_ENABLE 0x8000 + +#define TELEM_MASK_BIT 1 +#define TELEM_MASK_BYTE 0xFF +#define BYTES_PER_LONG 8 +#define TELEM_MASK_PCS_STATE 0xF + +#define TELEM_DISABLE(x) ((x) &= ~(BIT(31))) +#define TELEM_CLEAR_EVENTS(x) ((x) |= (BIT(30))) +#define TELEM_ENABLE_SRAM_EVT_TRACE(x) ((x) &= ~(BIT(30) | BIT(24))) +#define TELEM_ENABLE_PERIODIC(x) ((x) |= (BIT(23) | BIT(31) | BIT(7))) +#define TELEM_EXTRACT_VERBOSITY(x, y) ((y) = (((x) >> 27) & 0x3)) +#define TELEM_CLEAR_VERBOSITY_BITS(x) ((x) &= ~(BIT(27) | BIT(28))) +#define TELEM_SET_VERBOSITY_BITS(x, y) ((x) |= ((y) << 27)) + +enum telemetry_action { + TELEM_UPDATE = 0, + TELEM_ADD, + TELEM_RESET, + TELEM_ACTION_NONE +}; + +struct telem_ssram_region { + u64 timestamp; + u64 start_time; + u64 events[TELEM_MAX_EVENTS_SRAM]; +}; + +static struct telemetry_plt_config *telm_conf; + +/* + * The following counters are programmed by default during setup. + * Only 20 allocated to kernel driver + */ +static struct telemetry_evtmap + telemetry_apl_ioss_default_events[TELEM_MAX_OS_ALLOCATED_EVENTS] = { + {"SOC_S0IX_TOTAL_RES", 0x4800}, + {"SOC_S0IX_TOTAL_OCC", 0x4000}, + {"SOC_S0IX_SHALLOW_RES", 0x4801}, + {"SOC_S0IX_SHALLOW_OCC", 0x4001}, + {"SOC_S0IX_DEEP_RES", 0x4802}, + {"SOC_S0IX_DEEP_OCC", 0x4002}, + {"PMC_POWER_GATE", 0x5818}, + {"PMC_D3_STATES", 0x5819}, + {"PMC_D0I3_STATES", 0x581A}, + {"PMC_S0IX_WAKE_REASON_GPIO", 0x6000}, + {"PMC_S0IX_WAKE_REASON_TIMER", 0x6001}, + {"PMC_S0IX_WAKE_REASON_VNNREQ", 0x6002}, + {"PMC_S0IX_WAKE_REASON_LOWPOWER", 0x6003}, + {"PMC_S0IX_WAKE_REASON_EXTERNAL", 0x6004}, + {"PMC_S0IX_WAKE_REASON_MISC", 0x6005}, + {"PMC_S0IX_BLOCKING_IPS_D3_D0I3", 0x6006}, + {"PMC_S0IX_BLOCKING_IPS_PG", 0x6007}, + {"PMC_S0IX_BLOCKING_MISC_IPS_PG", 0x6008}, + {"PMC_S0IX_BLOCK_IPS_VNN_REQ", 0x6009}, + {"PMC_S0IX_BLOCK_IPS_CLOCKS", 0x600B}, +}; + + +static struct telemetry_evtmap + telemetry_apl_pss_default_events[TELEM_MAX_OS_ALLOCATED_EVENTS] = { + {"IA_CORE0_C6_RES", 0x0400}, + {"IA_CORE0_C6_CTR", 0x0000}, + {"IA_MODULE0_C7_RES", 0x0410}, + {"IA_MODULE0_C7_CTR", 0x000E}, + {"IA_C0_RES", 0x0805}, + {"PCS_LTR", 0x2801}, + {"PSTATES", 0x2802}, + {"SOC_S0I3_RES", 0x0409}, + {"SOC_S0I3_CTR", 0x000A}, + {"PCS_S0I3_CTR", 0x0009}, + {"PCS_C1E_RES", 0x041A}, + {"PCS_IDLE_STATUS", 0x2806}, + {"IA_PERF_LIMITS", 0x280B}, + {"GT_PERF_LIMITS", 0x280C}, + {"PCS_WAKEUP_S0IX_CTR", 0x0030}, + {"PCS_IDLE_BLOCKED", 0x2C00}, + {"PCS_S0IX_BLOCKED", 0x2C01}, + {"PCS_S0IX_WAKE_REASONS", 0x2C02}, + {"PCS_LTR_BLOCKING", 0x2C03}, + {"PC2_AND_MEM_SHALLOW_IDLE_RES", 0x1D40}, +}; + +static struct telemetry_evtmap + telemetry_glk_pss_default_events[TELEM_MAX_OS_ALLOCATED_EVENTS] = { + {"IA_CORE0_C6_RES", 0x0400}, + {"IA_CORE0_C6_CTR", 0x0000}, + {"IA_MODULE0_C7_RES", 0x0410}, + {"IA_MODULE0_C7_CTR", 0x000C}, + {"IA_C0_RES", 0x0805}, + {"PCS_LTR", 0x2801}, + {"PSTATES", 0x2802}, + {"SOC_S0I3_RES", 0x0407}, + {"SOC_S0I3_CTR", 0x0008}, + {"PCS_S0I3_CTR", 0x0007}, + {"PCS_C1E_RES", 0x0414}, + {"PCS_IDLE_STATUS", 0x2806}, + {"IA_PERF_LIMITS", 0x280B}, + {"GT_PERF_LIMITS", 0x280C}, + {"PCS_WAKEUP_S0IX_CTR", 0x0025}, + {"PCS_IDLE_BLOCKED", 0x2C00}, + {"PCS_S0IX_BLOCKED", 0x2C01}, + {"PCS_S0IX_WAKE_REASONS", 0x2C02}, + {"PCS_LTR_BLOCKING", 0x2C03}, + {"PC2_AND_MEM_SHALLOW_IDLE_RES", 0x1D40}, +}; + +/* APL specific Data */ +static struct telemetry_plt_config telem_apl_config = { + .pss_config = { + .telem_evts = telemetry_apl_pss_default_events, + }, + .ioss_config = { + .telem_evts = telemetry_apl_ioss_default_events, + }, +}; + +/* GLK specific Data */ +static struct telemetry_plt_config telem_glk_config = { + .pss_config = { + .telem_evts = telemetry_glk_pss_default_events, + }, + .ioss_config = { + .telem_evts = telemetry_apl_ioss_default_events, + }, +}; + +static const struct x86_cpu_id telemetry_cpu_ids[] = { + X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT, &telem_apl_config), + X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT_PLUS, &telem_glk_config), + {} +}; + +MODULE_DEVICE_TABLE(x86cpu, telemetry_cpu_ids); + +static inline int telem_get_unitconfig(enum telemetry_unit telem_unit, + struct telemetry_unit_config **unit_config) +{ + if (telem_unit == TELEM_PSS) + *unit_config = &(telm_conf->pss_config); + else if (telem_unit == TELEM_IOSS) + *unit_config = &(telm_conf->ioss_config); + else + return -EINVAL; + + return 0; + +} + +static int telemetry_check_evtid(enum telemetry_unit telem_unit, + u32 *evtmap, u8 len, + enum telemetry_action action) +{ + struct telemetry_unit_config *unit_config; + int ret; + + ret = telem_get_unitconfig(telem_unit, &unit_config); + if (ret < 0) + return ret; + + switch (action) { + case TELEM_RESET: + if (len > TELEM_MAX_EVENTS_SRAM) + return -EINVAL; + + break; + + case TELEM_UPDATE: + if (len > TELEM_MAX_EVENTS_SRAM) + return -EINVAL; + + if ((len > 0) && (evtmap == NULL)) + return -EINVAL; + + break; + + case TELEM_ADD: + if ((len + unit_config->ssram_evts_used) > + TELEM_MAX_EVENTS_SRAM) + return -EINVAL; + + if ((len > 0) && (evtmap == NULL)) + return -EINVAL; + + break; + + default: + pr_err("Unknown Telemetry action specified %d\n", action); + return -EINVAL; + } + + return 0; +} + + +static inline int telemetry_plt_config_ioss_event(u32 evt_id, int index) +{ + u32 write_buf; + + write_buf = evt_id | TELEM_EVENT_ENABLE; + write_buf <<= BITS_PER_BYTE; + write_buf |= index; + + return intel_scu_ipc_dev_command(telm_conf->scu, IOSS_TELEM, + IOSS_TELEM_EVENT_WRITE, &write_buf, + IOSS_TELEM_EVT_WRITE_SIZE, NULL, 0); +} + +static inline int telemetry_plt_config_pss_event(u32 evt_id, int index) +{ + u32 write_buf; + int ret; + + write_buf = evt_id | TELEM_EVENT_ENABLE; + ret = intel_punit_ipc_command(IPC_PUNIT_BIOS_WRITE_TELE_EVENT, + index, 0, &write_buf, NULL); + + return ret; +} + +static int telemetry_setup_iossevtconfig(struct telemetry_evtconfig evtconfig, + enum telemetry_action action) +{ + struct intel_scu_ipc_dev *scu = telm_conf->scu; + u8 num_ioss_evts, ioss_period; + int ret, index, idx; + u32 *ioss_evtmap; + u32 telem_ctrl; + + num_ioss_evts = evtconfig.num_evts; + ioss_period = evtconfig.period; + ioss_evtmap = evtconfig.evtmap; + + /* Get telemetry EVENT CTL */ + ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM, + IOSS_TELEM_EVENT_CTL_READ, NULL, 0, + &telem_ctrl, sizeof(telem_ctrl)); + if (ret) { + pr_err("IOSS TELEM_CTRL Read Failed\n"); + return ret; + } + + /* Disable Telemetry */ + TELEM_DISABLE(telem_ctrl); + + ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM, + IOSS_TELEM_EVENT_CTL_WRITE, &telem_ctrl, + sizeof(telem_ctrl), NULL, 0); + if (ret) { + pr_err("IOSS TELEM_CTRL Event Disable Write Failed\n"); + return ret; + } + + + /* Reset Everything */ + if (action == TELEM_RESET) { + /* Clear All Events */ + TELEM_CLEAR_EVENTS(telem_ctrl); + + ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM, + IOSS_TELEM_EVENT_CTL_WRITE, + &telem_ctrl, sizeof(telem_ctrl), + NULL, 0); + if (ret) { + pr_err("IOSS TELEM_CTRL Event Disable Write Failed\n"); + return ret; + } + telm_conf->ioss_config.ssram_evts_used = 0; + + /* Configure Events */ + for (idx = 0; idx < num_ioss_evts; idx++) { + if (telemetry_plt_config_ioss_event( + telm_conf->ioss_config.telem_evts[idx].evt_id, + idx)) { + pr_err("IOSS TELEM_RESET Fail for data: %x\n", + telm_conf->ioss_config.telem_evts[idx].evt_id); + continue; + } + telm_conf->ioss_config.ssram_evts_used++; + } + } + + /* Re-Configure Everything */ + if (action == TELEM_UPDATE) { + /* Clear All Events */ + TELEM_CLEAR_EVENTS(telem_ctrl); + + ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM, + IOSS_TELEM_EVENT_CTL_WRITE, + &telem_ctrl, sizeof(telem_ctrl), + NULL, 0); + if (ret) { + pr_err("IOSS TELEM_CTRL Event Disable Write Failed\n"); + return ret; + } + telm_conf->ioss_config.ssram_evts_used = 0; + + /* Configure Events */ + for (index = 0; index < num_ioss_evts; index++) { + telm_conf->ioss_config.telem_evts[index].evt_id = + ioss_evtmap[index]; + + if (telemetry_plt_config_ioss_event( + telm_conf->ioss_config.telem_evts[index].evt_id, + index)) { + pr_err("IOSS TELEM_UPDATE Fail for Evt%x\n", + ioss_evtmap[index]); + continue; + } + telm_conf->ioss_config.ssram_evts_used++; + } + } + + /* Add some Events */ + if (action == TELEM_ADD) { + /* Configure Events */ + for (index = telm_conf->ioss_config.ssram_evts_used, idx = 0; + idx < num_ioss_evts; index++, idx++) { + telm_conf->ioss_config.telem_evts[index].evt_id = + ioss_evtmap[idx]; + + if (telemetry_plt_config_ioss_event( + telm_conf->ioss_config.telem_evts[index].evt_id, + index)) { + pr_err("IOSS TELEM_ADD Fail for Event %x\n", + ioss_evtmap[idx]); + continue; + } + telm_conf->ioss_config.ssram_evts_used++; + } + } + + /* Enable Periodic Telemetry Events and enable SRAM trace */ + TELEM_CLEAR_SAMPLE_PERIOD(telem_ctrl); + TELEM_ENABLE_SRAM_EVT_TRACE(telem_ctrl); + TELEM_ENABLE_PERIODIC(telem_ctrl); + telem_ctrl |= ioss_period; + + ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM, + IOSS_TELEM_EVENT_CTL_WRITE, + &telem_ctrl, sizeof(telem_ctrl), NULL, 0); + if (ret) { + pr_err("IOSS TELEM_CTRL Event Enable Write Failed\n"); + return ret; + } + + telm_conf->ioss_config.curr_period = ioss_period; + + return 0; +} + + +static int telemetry_setup_pssevtconfig(struct telemetry_evtconfig evtconfig, + enum telemetry_action action) +{ + u8 num_pss_evts, pss_period; + int ret, index, idx; + u32 *pss_evtmap; + u32 telem_ctrl; + + num_pss_evts = evtconfig.num_evts; + pss_period = evtconfig.period; + pss_evtmap = evtconfig.evtmap; + + /* PSS Config */ + /* Get telemetry EVENT CTL */ + ret = intel_punit_ipc_command(IPC_PUNIT_BIOS_READ_TELE_EVENT_CTRL, + 0, 0, NULL, &telem_ctrl); + if (ret) { + pr_err("PSS TELEM_CTRL Read Failed\n"); + return ret; + } + + /* Disable Telemetry */ + TELEM_DISABLE(telem_ctrl); + ret = intel_punit_ipc_command(IPC_PUNIT_BIOS_WRITE_TELE_EVENT_CTRL, + 0, 0, &telem_ctrl, NULL); + if (ret) { + pr_err("PSS TELEM_CTRL Event Disable Write Failed\n"); + return ret; + } + + /* Reset Everything */ + if (action == TELEM_RESET) { + /* Clear All Events */ + TELEM_CLEAR_EVENTS(telem_ctrl); + + ret = intel_punit_ipc_command( + IPC_PUNIT_BIOS_WRITE_TELE_EVENT_CTRL, + 0, 0, &telem_ctrl, NULL); + if (ret) { + pr_err("PSS TELEM_CTRL Event Disable Write Failed\n"); + return ret; + } + telm_conf->pss_config.ssram_evts_used = 0; + /* Configure Events */ + for (idx = 0; idx < num_pss_evts; idx++) { + if (telemetry_plt_config_pss_event( + telm_conf->pss_config.telem_evts[idx].evt_id, + idx)) { + pr_err("PSS TELEM_RESET Fail for Event %x\n", + telm_conf->pss_config.telem_evts[idx].evt_id); + continue; + } + telm_conf->pss_config.ssram_evts_used++; + } + } + + /* Re-Configure Everything */ + if (action == TELEM_UPDATE) { + /* Clear All Events */ + TELEM_CLEAR_EVENTS(telem_ctrl); + + ret = intel_punit_ipc_command( + IPC_PUNIT_BIOS_WRITE_TELE_EVENT_CTRL, + 0, 0, &telem_ctrl, NULL); + if (ret) { + pr_err("PSS TELEM_CTRL Event Disable Write Failed\n"); + return ret; + } + telm_conf->pss_config.ssram_evts_used = 0; + + /* Configure Events */ + for (index = 0; index < num_pss_evts; index++) { + telm_conf->pss_config.telem_evts[index].evt_id = + pss_evtmap[index]; + + if (telemetry_plt_config_pss_event( + telm_conf->pss_config.telem_evts[index].evt_id, + index)) { + pr_err("PSS TELEM_UPDATE Fail for Event %x\n", + pss_evtmap[index]); + continue; + } + telm_conf->pss_config.ssram_evts_used++; + } + } + + /* Add some Events */ + if (action == TELEM_ADD) { + /* Configure Events */ + for (index = telm_conf->pss_config.ssram_evts_used, idx = 0; + idx < num_pss_evts; index++, idx++) { + + telm_conf->pss_config.telem_evts[index].evt_id = + pss_evtmap[idx]; + + if (telemetry_plt_config_pss_event( + telm_conf->pss_config.telem_evts[index].evt_id, + index)) { + pr_err("PSS TELEM_ADD Fail for Event %x\n", + pss_evtmap[idx]); + continue; + } + telm_conf->pss_config.ssram_evts_used++; + } + } + + /* Enable Periodic Telemetry Events and enable SRAM trace */ + TELEM_CLEAR_SAMPLE_PERIOD(telem_ctrl); + TELEM_ENABLE_SRAM_EVT_TRACE(telem_ctrl); + TELEM_ENABLE_PERIODIC(telem_ctrl); + telem_ctrl |= pss_period; + + ret = intel_punit_ipc_command(IPC_PUNIT_BIOS_WRITE_TELE_EVENT_CTRL, + 0, 0, &telem_ctrl, NULL); + if (ret) { + pr_err("PSS TELEM_CTRL Event Enable Write Failed\n"); + return ret; + } + + telm_conf->pss_config.curr_period = pss_period; + + return 0; +} + +static int telemetry_setup_evtconfig(struct telemetry_evtconfig pss_evtconfig, + struct telemetry_evtconfig ioss_evtconfig, + enum telemetry_action action) +{ + int ret; + + mutex_lock(&(telm_conf->telem_lock)); + + if ((action == TELEM_UPDATE) && (telm_conf->telem_in_use)) { + ret = -EBUSY; + goto out; + } + + ret = telemetry_check_evtid(TELEM_PSS, pss_evtconfig.evtmap, + pss_evtconfig.num_evts, action); + if (ret) + goto out; + + ret = telemetry_check_evtid(TELEM_IOSS, ioss_evtconfig.evtmap, + ioss_evtconfig.num_evts, action); + if (ret) + goto out; + + if (ioss_evtconfig.num_evts) { + ret = telemetry_setup_iossevtconfig(ioss_evtconfig, action); + if (ret) + goto out; + } + + if (pss_evtconfig.num_evts) { + ret = telemetry_setup_pssevtconfig(pss_evtconfig, action); + if (ret) + goto out; + } + + if ((action == TELEM_UPDATE) || (action == TELEM_ADD)) + telm_conf->telem_in_use = true; + else + telm_conf->telem_in_use = false; + +out: + mutex_unlock(&(telm_conf->telem_lock)); + return ret; +} + +static int telemetry_setup(struct platform_device *pdev) +{ + struct telemetry_evtconfig pss_evtconfig, ioss_evtconfig; + u32 read_buf, events, event_regs; + int ret; + + ret = intel_scu_ipc_dev_command(telm_conf->scu, IOSS_TELEM, + IOSS_TELEM_INFO_READ, NULL, 0, + &read_buf, sizeof(read_buf)); + if (ret) { + dev_err(&pdev->dev, "IOSS TELEM_INFO Read Failed\n"); + return ret; + } + + /* Get telemetry Info */ + events = (read_buf & TELEM_INFO_SRAMEVTS_MASK) >> + TELEM_INFO_SRAMEVTS_SHIFT; + event_regs = read_buf & TELEM_INFO_NENABLES_MASK; + if ((events < TELEM_MAX_EVENTS_SRAM) || + (event_regs < TELEM_MAX_EVENTS_SRAM)) { + dev_err(&pdev->dev, "IOSS:Insufficient Space for SRAM Trace\n"); + dev_err(&pdev->dev, "SRAM Events %d; Event Regs %d\n", + events, event_regs); + return -ENOMEM; + } + + telm_conf->ioss_config.min_period = TELEM_MIN_PERIOD(read_buf); + telm_conf->ioss_config.max_period = TELEM_MAX_PERIOD(read_buf); + + /* PUNIT Mailbox Setup */ + ret = intel_punit_ipc_command(IPC_PUNIT_BIOS_READ_TELE_INFO, 0, 0, + NULL, &read_buf); + if (ret) { + dev_err(&pdev->dev, "PSS TELEM_INFO Read Failed\n"); + return ret; + } + + /* Get telemetry Info */ + events = (read_buf & TELEM_INFO_SRAMEVTS_MASK) >> + TELEM_INFO_SRAMEVTS_SHIFT; + event_regs = read_buf & TELEM_INFO_SRAMEVTS_MASK; + if ((events < TELEM_MAX_EVENTS_SRAM) || + (event_regs < TELEM_MAX_EVENTS_SRAM)) { + dev_err(&pdev->dev, "PSS:Insufficient Space for SRAM Trace\n"); + dev_err(&pdev->dev, "SRAM Events %d; Event Regs %d\n", + events, event_regs); + return -ENOMEM; + } + + telm_conf->pss_config.min_period = TELEM_MIN_PERIOD(read_buf); + telm_conf->pss_config.max_period = TELEM_MAX_PERIOD(read_buf); + + pss_evtconfig.evtmap = NULL; + pss_evtconfig.num_evts = TELEM_MAX_OS_ALLOCATED_EVENTS; + pss_evtconfig.period = TELEM_SAMPLING_DEFAULT_PERIOD; + + ioss_evtconfig.evtmap = NULL; + ioss_evtconfig.num_evts = TELEM_MAX_OS_ALLOCATED_EVENTS; + ioss_evtconfig.period = TELEM_SAMPLING_DEFAULT_PERIOD; + + ret = telemetry_setup_evtconfig(pss_evtconfig, ioss_evtconfig, + TELEM_RESET); + if (ret) { + dev_err(&pdev->dev, "TELEMETRY Setup Failed\n"); + return ret; + } + return 0; +} + +static int telemetry_plt_update_events(struct telemetry_evtconfig pss_evtconfig, + struct telemetry_evtconfig ioss_evtconfig) +{ + int ret; + + if ((pss_evtconfig.num_evts > 0) && + (TELEM_SAMPLE_PERIOD_INVALID(pss_evtconfig.period))) { + pr_err("PSS Sampling Period Out of Range\n"); + return -EINVAL; + } + + if ((ioss_evtconfig.num_evts > 0) && + (TELEM_SAMPLE_PERIOD_INVALID(ioss_evtconfig.period))) { + pr_err("IOSS Sampling Period Out of Range\n"); + return -EINVAL; + } + + ret = telemetry_setup_evtconfig(pss_evtconfig, ioss_evtconfig, + TELEM_UPDATE); + if (ret) + pr_err("TELEMETRY Config Failed\n"); + + return ret; +} + + +static int telemetry_plt_set_sampling_period(u8 pss_period, u8 ioss_period) +{ + u32 telem_ctrl = 0; + int ret = 0; + + mutex_lock(&(telm_conf->telem_lock)); + if (ioss_period) { + struct intel_scu_ipc_dev *scu = telm_conf->scu; + + if (TELEM_SAMPLE_PERIOD_INVALID(ioss_period)) { + pr_err("IOSS Sampling Period Out of Range\n"); + ret = -EINVAL; + goto out; + } + + /* Get telemetry EVENT CTL */ + ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM, + IOSS_TELEM_EVENT_CTL_READ, NULL, 0, + &telem_ctrl, sizeof(telem_ctrl)); + if (ret) { + pr_err("IOSS TELEM_CTRL Read Failed\n"); + goto out; + } + + /* Disable Telemetry */ + TELEM_DISABLE(telem_ctrl); + + ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM, + IOSS_TELEM_EVENT_CTL_WRITE, + &telem_ctrl, sizeof(telem_ctrl), + NULL, 0); + if (ret) { + pr_err("IOSS TELEM_CTRL Event Disable Write Failed\n"); + goto out; + } + + /* Enable Periodic Telemetry Events and enable SRAM trace */ + TELEM_CLEAR_SAMPLE_PERIOD(telem_ctrl); + TELEM_ENABLE_SRAM_EVT_TRACE(telem_ctrl); + TELEM_ENABLE_PERIODIC(telem_ctrl); + telem_ctrl |= ioss_period; + + ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM, + IOSS_TELEM_EVENT_CTL_WRITE, + &telem_ctrl, sizeof(telem_ctrl), + NULL, 0); + if (ret) { + pr_err("IOSS TELEM_CTRL Event Enable Write Failed\n"); + goto out; + } + telm_conf->ioss_config.curr_period = ioss_period; + } + + if (pss_period) { + if (TELEM_SAMPLE_PERIOD_INVALID(pss_period)) { + pr_err("PSS Sampling Period Out of Range\n"); + ret = -EINVAL; + goto out; + } + + /* Get telemetry EVENT CTL */ + ret = intel_punit_ipc_command( + IPC_PUNIT_BIOS_READ_TELE_EVENT_CTRL, + 0, 0, NULL, &telem_ctrl); + if (ret) { + pr_err("PSS TELEM_CTRL Read Failed\n"); + goto out; + } + + /* Disable Telemetry */ + TELEM_DISABLE(telem_ctrl); + ret = intel_punit_ipc_command( + IPC_PUNIT_BIOS_WRITE_TELE_EVENT_CTRL, + 0, 0, &telem_ctrl, NULL); + if (ret) { + pr_err("PSS TELEM_CTRL Event Disable Write Failed\n"); + goto out; + } + + /* Enable Periodic Telemetry Events and enable SRAM trace */ + TELEM_CLEAR_SAMPLE_PERIOD(telem_ctrl); + TELEM_ENABLE_SRAM_EVT_TRACE(telem_ctrl); + TELEM_ENABLE_PERIODIC(telem_ctrl); + telem_ctrl |= pss_period; + + ret = intel_punit_ipc_command( + IPC_PUNIT_BIOS_WRITE_TELE_EVENT_CTRL, + 0, 0, &telem_ctrl, NULL); + if (ret) { + pr_err("PSS TELEM_CTRL Event Enable Write Failed\n"); + goto out; + } + telm_conf->pss_config.curr_period = pss_period; + } + +out: + mutex_unlock(&(telm_conf->telem_lock)); + return ret; +} + + +static int telemetry_plt_get_sampling_period(u8 *pss_min_period, + u8 *pss_max_period, + u8 *ioss_min_period, + u8 *ioss_max_period) +{ + *pss_min_period = telm_conf->pss_config.min_period; + *pss_max_period = telm_conf->pss_config.max_period; + *ioss_min_period = telm_conf->ioss_config.min_period; + *ioss_max_period = telm_conf->ioss_config.max_period; + + return 0; +} + + +static int telemetry_plt_reset_events(void) +{ + struct telemetry_evtconfig pss_evtconfig, ioss_evtconfig; + int ret; + + pss_evtconfig.evtmap = NULL; + pss_evtconfig.num_evts = TELEM_MAX_OS_ALLOCATED_EVENTS; + pss_evtconfig.period = TELEM_SAMPLING_DEFAULT_PERIOD; + + ioss_evtconfig.evtmap = NULL; + ioss_evtconfig.num_evts = TELEM_MAX_OS_ALLOCATED_EVENTS; + ioss_evtconfig.period = TELEM_SAMPLING_DEFAULT_PERIOD; + + ret = telemetry_setup_evtconfig(pss_evtconfig, ioss_evtconfig, + TELEM_RESET); + if (ret) + pr_err("TELEMETRY Reset Failed\n"); + + return ret; +} + + +static int telemetry_plt_get_eventconfig(struct telemetry_evtconfig *pss_config, + struct telemetry_evtconfig *ioss_config, + int pss_len, int ioss_len) +{ + u32 *pss_evtmap, *ioss_evtmap; + u32 index; + + pss_evtmap = pss_config->evtmap; + ioss_evtmap = ioss_config->evtmap; + + mutex_lock(&(telm_conf->telem_lock)); + pss_config->num_evts = telm_conf->pss_config.ssram_evts_used; + ioss_config->num_evts = telm_conf->ioss_config.ssram_evts_used; + + pss_config->period = telm_conf->pss_config.curr_period; + ioss_config->period = telm_conf->ioss_config.curr_period; + + if ((pss_len < telm_conf->pss_config.ssram_evts_used) || + (ioss_len < telm_conf->ioss_config.ssram_evts_used)) { + mutex_unlock(&(telm_conf->telem_lock)); + return -EINVAL; + } + + for (index = 0; index < telm_conf->pss_config.ssram_evts_used; + index++) { + pss_evtmap[index] = + telm_conf->pss_config.telem_evts[index].evt_id; + } + + for (index = 0; index < telm_conf->ioss_config.ssram_evts_used; + index++) { + ioss_evtmap[index] = + telm_conf->ioss_config.telem_evts[index].evt_id; + } + + mutex_unlock(&(telm_conf->telem_lock)); + return 0; +} + + +static int telemetry_plt_add_events(u8 num_pss_evts, u8 num_ioss_evts, + u32 *pss_evtmap, u32 *ioss_evtmap) +{ + struct telemetry_evtconfig pss_evtconfig, ioss_evtconfig; + int ret; + + pss_evtconfig.evtmap = pss_evtmap; + pss_evtconfig.num_evts = num_pss_evts; + pss_evtconfig.period = telm_conf->pss_config.curr_period; + + ioss_evtconfig.evtmap = ioss_evtmap; + ioss_evtconfig.num_evts = num_ioss_evts; + ioss_evtconfig.period = telm_conf->ioss_config.curr_period; + + ret = telemetry_setup_evtconfig(pss_evtconfig, ioss_evtconfig, + TELEM_ADD); + if (ret) + pr_err("TELEMETRY ADD Failed\n"); + + return ret; +} + +static int telem_evtlog_read(enum telemetry_unit telem_unit, + struct telem_ssram_region *ssram_region, u8 len) +{ + struct telemetry_unit_config *unit_config; + u64 timestamp_prev, timestamp_next; + int ret, index, timeout = 0; + + ret = telem_get_unitconfig(telem_unit, &unit_config); + if (ret < 0) + return ret; + + if (len > unit_config->ssram_evts_used) + len = unit_config->ssram_evts_used; + + do { + timestamp_prev = readq(unit_config->regmap); + if (!timestamp_prev) { + pr_err("Ssram under update. Please Try Later\n"); + return -EBUSY; + } + + ssram_region->start_time = readq(unit_config->regmap + + TELEM_SSRAM_STARTTIME_OFFSET); + + for (index = 0; index < len; index++) { + ssram_region->events[index] = + readq(unit_config->regmap + TELEM_SSRAM_EVTLOG_OFFSET + + BYTES_PER_LONG*index); + } + + timestamp_next = readq(unit_config->regmap); + if (!timestamp_next) { + pr_err("Ssram under update. Please Try Later\n"); + return -EBUSY; + } + + if (timeout++ > TELEM_SSRAM_READ_TIMEOUT) { + pr_err("Timeout while reading Events\n"); + return -EBUSY; + } + + } while (timestamp_prev != timestamp_next); + + ssram_region->timestamp = timestamp_next; + + return len; +} + +static int telemetry_plt_raw_read_eventlog(enum telemetry_unit telem_unit, + struct telemetry_evtlog *evtlog, + int len, int log_all_evts) +{ + int index, idx1, ret, readlen = len; + struct telem_ssram_region ssram_region; + struct telemetry_evtmap *evtmap; + + switch (telem_unit) { + case TELEM_PSS: + evtmap = telm_conf->pss_config.telem_evts; + break; + + case TELEM_IOSS: + evtmap = telm_conf->ioss_config.telem_evts; + break; + + default: + pr_err("Unknown Telemetry Unit Specified %d\n", telem_unit); + return -EINVAL; + } + + if (!log_all_evts) + readlen = TELEM_MAX_EVENTS_SRAM; + + ret = telem_evtlog_read(telem_unit, &ssram_region, readlen); + if (ret < 0) + return ret; + + /* Invalid evt-id array specified via length mismatch */ + if ((!log_all_evts) && (len > ret)) + return -EINVAL; + + if (log_all_evts) + for (index = 0; index < ret; index++) { + evtlog[index].telem_evtlog = ssram_region.events[index]; + evtlog[index].telem_evtid = evtmap[index].evt_id; + } + else + for (index = 0, readlen = 0; (index < ret) && (readlen < len); + index++) { + for (idx1 = 0; idx1 < len; idx1++) { + /* Elements matched */ + if (evtmap[index].evt_id == + evtlog[idx1].telem_evtid) { + evtlog[idx1].telem_evtlog = + ssram_region.events[index]; + readlen++; + + break; + } + } + } + + return readlen; +} + +static int telemetry_plt_read_eventlog(enum telemetry_unit telem_unit, + struct telemetry_evtlog *evtlog, int len, int log_all_evts) +{ + int ret; + + mutex_lock(&(telm_conf->telem_lock)); + ret = telemetry_plt_raw_read_eventlog(telem_unit, evtlog, + len, log_all_evts); + mutex_unlock(&(telm_conf->telem_lock)); + + return ret; +} + +static int telemetry_plt_get_trace_verbosity(enum telemetry_unit telem_unit, + u32 *verbosity) +{ + u32 temp = 0; + int ret; + + if (verbosity == NULL) + return -EINVAL; + + mutex_lock(&(telm_conf->telem_trace_lock)); + switch (telem_unit) { + case TELEM_PSS: + ret = intel_punit_ipc_command( + IPC_PUNIT_BIOS_READ_TELE_TRACE_CTRL, + 0, 0, NULL, &temp); + if (ret) { + pr_err("PSS TRACE_CTRL Read Failed\n"); + goto out; + } + + break; + + case TELEM_IOSS: + ret = intel_scu_ipc_dev_command(telm_conf->scu, + IOSS_TELEM, IOSS_TELEM_TRACE_CTL_READ, + NULL, 0, &temp, sizeof(temp)); + if (ret) { + pr_err("IOSS TRACE_CTL Read Failed\n"); + goto out; + } + + break; + + default: + pr_err("Unknown Telemetry Unit Specified %d\n", telem_unit); + ret = -EINVAL; + break; + } + TELEM_EXTRACT_VERBOSITY(temp, *verbosity); + +out: + mutex_unlock(&(telm_conf->telem_trace_lock)); + return ret; +} + +static int telemetry_plt_set_trace_verbosity(enum telemetry_unit telem_unit, + u32 verbosity) +{ + u32 temp = 0; + int ret; + + verbosity &= TELEM_TRC_VERBOSITY_MASK; + + mutex_lock(&(telm_conf->telem_trace_lock)); + switch (telem_unit) { + case TELEM_PSS: + ret = intel_punit_ipc_command( + IPC_PUNIT_BIOS_READ_TELE_TRACE_CTRL, + 0, 0, NULL, &temp); + if (ret) { + pr_err("PSS TRACE_CTRL Read Failed\n"); + goto out; + } + + TELEM_CLEAR_VERBOSITY_BITS(temp); + TELEM_SET_VERBOSITY_BITS(temp, verbosity); + + ret = intel_punit_ipc_command( + IPC_PUNIT_BIOS_WRITE_TELE_TRACE_CTRL, + 0, 0, &temp, NULL); + if (ret) { + pr_err("PSS TRACE_CTRL Verbosity Set Failed\n"); + goto out; + } + break; + + case TELEM_IOSS: + ret = intel_scu_ipc_dev_command(telm_conf->scu, IOSS_TELEM, + IOSS_TELEM_TRACE_CTL_READ, + NULL, 0, &temp, sizeof(temp)); + if (ret) { + pr_err("IOSS TRACE_CTL Read Failed\n"); + goto out; + } + + TELEM_CLEAR_VERBOSITY_BITS(temp); + TELEM_SET_VERBOSITY_BITS(temp, verbosity); + + ret = intel_scu_ipc_dev_command(telm_conf->scu, IOSS_TELEM, + IOSS_TELEM_TRACE_CTL_WRITE, + &temp, sizeof(temp), NULL, 0); + if (ret) { + pr_err("IOSS TRACE_CTL Verbosity Set Failed\n"); + goto out; + } + break; + + default: + pr_err("Unknown Telemetry Unit Specified %d\n", telem_unit); + ret = -EINVAL; + break; + } + +out: + mutex_unlock(&(telm_conf->telem_trace_lock)); + return ret; +} + +static const struct telemetry_core_ops telm_pltops = { + .get_trace_verbosity = telemetry_plt_get_trace_verbosity, + .set_trace_verbosity = telemetry_plt_set_trace_verbosity, + .set_sampling_period = telemetry_plt_set_sampling_period, + .get_sampling_period = telemetry_plt_get_sampling_period, + .raw_read_eventlog = telemetry_plt_raw_read_eventlog, + .get_eventconfig = telemetry_plt_get_eventconfig, + .update_events = telemetry_plt_update_events, + .read_eventlog = telemetry_plt_read_eventlog, + .reset_events = telemetry_plt_reset_events, + .add_events = telemetry_plt_add_events, +}; + +static int telemetry_pltdrv_probe(struct platform_device *pdev) +{ + const struct x86_cpu_id *id; + void __iomem *mem; + int ret; + + id = x86_match_cpu(telemetry_cpu_ids); + if (!id) + return -ENODEV; + + telm_conf = (struct telemetry_plt_config *)id->driver_data; + + telm_conf->pmc = dev_get_drvdata(pdev->dev.parent); + + mem = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(mem)) + return PTR_ERR(mem); + + telm_conf->pss_config.regmap = mem; + + mem = devm_platform_ioremap_resource(pdev, 1); + if (IS_ERR(mem)) + return PTR_ERR(mem); + + telm_conf->ioss_config.regmap = mem; + + telm_conf->scu = devm_intel_scu_ipc_dev_get(&pdev->dev); + if (!telm_conf->scu) { + ret = -EPROBE_DEFER; + goto out; + } + + mutex_init(&telm_conf->telem_lock); + mutex_init(&telm_conf->telem_trace_lock); + + ret = telemetry_setup(pdev); + if (ret) + goto out; + + ret = telemetry_set_pltdata(&telm_pltops, telm_conf); + if (ret) { + dev_err(&pdev->dev, "TELEMETRY Set Pltops Failed.\n"); + goto out; + } + + return 0; + +out: + dev_err(&pdev->dev, "TELEMETRY Setup Failed.\n"); + + return ret; +} + +static int telemetry_pltdrv_remove(struct platform_device *pdev) +{ + telemetry_clear_pltdata(); + return 0; +} + +static struct platform_driver telemetry_soc_driver = { + .probe = telemetry_pltdrv_probe, + .remove = telemetry_pltdrv_remove, + .driver = { + .name = DRIVER_NAME, + }, +}; + +static int __init telemetry_module_init(void) +{ + return platform_driver_register(&telemetry_soc_driver); +} + +static void __exit telemetry_module_exit(void) +{ + platform_driver_unregister(&telemetry_soc_driver); +} + +device_initcall(telemetry_module_init); +module_exit(telemetry_module_exit); + +MODULE_AUTHOR("Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>"); +MODULE_DESCRIPTION("Intel SoC Telemetry Platform Driver"); +MODULE_VERSION(DRIVER_VERSION); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/platform/x86/intel/turbo_max_3.c b/drivers/platform/x86/intel/turbo_max_3.c new file mode 100644 index 000000000..892140b62 --- /dev/null +++ b/drivers/platform/x86/intel/turbo_max_3.c @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel Turbo Boost Max Technology 3.0 legacy (non HWP) enumeration driver + * Copyright (c) 2017, Intel Corporation. + * All rights reserved. + * + * Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> + */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/cpufeature.h> +#include <linux/cpuhotplug.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/topology.h> +#include <linux/workqueue.h> + +#include <asm/cpu_device_id.h> +#include <asm/intel-family.h> + +#define MSR_OC_MAILBOX 0x150 +#define MSR_OC_MAILBOX_CMD_OFFSET 32 +#define MSR_OC_MAILBOX_RSP_OFFSET 32 +#define MSR_OC_MAILBOX_BUSY_BIT 63 +#define OC_MAILBOX_FC_CONTROL_CMD 0x1C + +/* + * Typical latency to get mail box response is ~3us, It takes +3 us to + * process reading mailbox after issuing mailbox write on a Broadwell 3.4 GHz + * system. So for most of the time, the first mailbox read should have the + * response, but to avoid some boundary cases retry twice. + */ +#define OC_MAILBOX_RETRY_COUNT 2 + +static int get_oc_core_priority(unsigned int cpu) +{ + u64 value, cmd = OC_MAILBOX_FC_CONTROL_CMD; + int ret, i; + + /* Issue favored core read command */ + value = cmd << MSR_OC_MAILBOX_CMD_OFFSET; + /* Set the busy bit to indicate OS is trying to issue command */ + value |= BIT_ULL(MSR_OC_MAILBOX_BUSY_BIT); + ret = wrmsrl_safe(MSR_OC_MAILBOX, value); + if (ret) { + pr_debug("cpu %d OC mailbox write failed\n", cpu); + return ret; + } + + for (i = 0; i < OC_MAILBOX_RETRY_COUNT; ++i) { + ret = rdmsrl_safe(MSR_OC_MAILBOX, &value); + if (ret) { + pr_debug("cpu %d OC mailbox read failed\n", cpu); + break; + } + + if (value & BIT_ULL(MSR_OC_MAILBOX_BUSY_BIT)) { + pr_debug("cpu %d OC mailbox still processing\n", cpu); + ret = -EBUSY; + continue; + } + + if ((value >> MSR_OC_MAILBOX_RSP_OFFSET) & 0xff) { + pr_debug("cpu %d OC mailbox cmd failed\n", cpu); + ret = -ENXIO; + break; + } + + ret = value & 0xff; + pr_debug("cpu %d max_ratio %d\n", cpu, ret); + break; + } + + return ret; +} + +/* + * The work item is needed to avoid CPU hotplug locking issues. The function + * itmt_legacy_set_priority() is called from CPU online callback, so can't + * call sched_set_itmt_support() from there as this function will aquire + * hotplug locks in its path. + */ +static void itmt_legacy_work_fn(struct work_struct *work) +{ + sched_set_itmt_support(); +} + +static DECLARE_WORK(sched_itmt_work, itmt_legacy_work_fn); + +static int itmt_legacy_cpu_online(unsigned int cpu) +{ + static u32 max_highest_perf = 0, min_highest_perf = U32_MAX; + int priority; + + priority = get_oc_core_priority(cpu); + if (priority < 0) + return 0; + + sched_set_itmt_core_prio(priority, cpu); + + /* Enable ITMT feature when a core with different priority is found */ + if (max_highest_perf <= min_highest_perf) { + if (priority > max_highest_perf) + max_highest_perf = priority; + + if (priority < min_highest_perf) + min_highest_perf = priority; + + if (max_highest_perf > min_highest_perf) + schedule_work(&sched_itmt_work); + } + + return 0; +} + +static const struct x86_cpu_id itmt_legacy_cpu_ids[] = { + X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_X, NULL), + X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_X, NULL), + {} +}; + +static int __init itmt_legacy_init(void) +{ + const struct x86_cpu_id *id; + int ret; + + id = x86_match_cpu(itmt_legacy_cpu_ids); + if (!id) + return -ENODEV; + + ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, + "platform/x86/turbo_max_3:online", + itmt_legacy_cpu_online, NULL); + if (ret < 0) + return ret; + + return 0; +} +late_initcall(itmt_legacy_init) diff --git a/drivers/platform/x86/intel/uncore-frequency/Kconfig b/drivers/platform/x86/intel/uncore-frequency/Kconfig new file mode 100644 index 000000000..21b209124 --- /dev/null +++ b/drivers/platform/x86/intel/uncore-frequency/Kconfig @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Uncore Frquency control drivers +# + +menu "Intel Uncore Frequency Control" + depends on X86_64 || COMPILE_TEST + +config INTEL_UNCORE_FREQ_CONTROL + tristate "Intel Uncore frequency control driver" + depends on X86_64 + help + This driver allows control of Uncore frequency limits on + supported server platforms. + + Uncore frequency controls RING/LLC (last-level cache) clocks. + + To compile this driver as a module, choose M here: the module + will be called intel-uncore-frequency. + +endmenu diff --git a/drivers/platform/x86/intel/uncore-frequency/Makefile b/drivers/platform/x86/intel/uncore-frequency/Makefile new file mode 100644 index 000000000..e0f7968e8 --- /dev/null +++ b/drivers/platform/x86/intel/uncore-frequency/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for linux/drivers/platform/x86/intel/uncore-frequency +# + +obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL) += intel-uncore-frequency.o +intel-uncore-frequency-y := uncore-frequency.o +obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL) += intel-uncore-frequency-common.o +intel-uncore-frequency-common-y := uncore-frequency-common.o diff --git a/drivers/platform/x86/intel/uncore-frequency/uncore-frequency-common.c b/drivers/platform/x86/intel/uncore-frequency/uncore-frequency-common.c new file mode 100644 index 000000000..dd2e654da --- /dev/null +++ b/drivers/platform/x86/intel/uncore-frequency/uncore-frequency-common.c @@ -0,0 +1,260 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel Uncore Frequency Control: Common code implementation + * Copyright (c) 2022, Intel Corporation. + * All rights reserved. + * + */ +#include <linux/cpu.h> +#include <linux/module.h> +#include "uncore-frequency-common.h" + +/* Mutex to control all mutual exclusions */ +static DEFINE_MUTEX(uncore_lock); +/* Root of the all uncore sysfs kobjs */ +static struct kobject *uncore_root_kobj; +/* uncore instance count */ +static int uncore_instance_count; + +/* callbacks for actual HW read/write */ +static int (*uncore_read)(struct uncore_data *data, unsigned int *min, unsigned int *max); +static int (*uncore_write)(struct uncore_data *data, unsigned int input, unsigned int min_max); +static int (*uncore_read_freq)(struct uncore_data *data, unsigned int *freq); + +static ssize_t show_min_max_freq_khz(struct uncore_data *data, + char *buf, int min_max) +{ + unsigned int min, max; + int ret; + + mutex_lock(&uncore_lock); + ret = uncore_read(data, &min, &max); + mutex_unlock(&uncore_lock); + if (ret) + return ret; + + if (min_max) + return sprintf(buf, "%u\n", max); + + return sprintf(buf, "%u\n", min); +} + +static ssize_t store_min_max_freq_khz(struct uncore_data *data, + const char *buf, ssize_t count, + int min_max) +{ + unsigned int input; + int ret; + + if (kstrtouint(buf, 10, &input)) + return -EINVAL; + + mutex_lock(&uncore_lock); + ret = uncore_write(data, input, min_max); + mutex_unlock(&uncore_lock); + + if (ret) + return ret; + + return count; +} + +static ssize_t show_perf_status_freq_khz(struct uncore_data *data, char *buf) +{ + unsigned int freq; + int ret; + + mutex_lock(&uncore_lock); + ret = uncore_read_freq(data, &freq); + mutex_unlock(&uncore_lock); + if (ret) + return ret; + + return sprintf(buf, "%u\n", freq); +} + +#define store_uncore_min_max(name, min_max) \ + static ssize_t store_##name(struct kobject *kobj, \ + struct kobj_attribute *attr, \ + const char *buf, size_t count) \ + { \ + struct uncore_data *data = container_of(attr, struct uncore_data, name##_kobj_attr);\ + \ + return store_min_max_freq_khz(data, buf, count, \ + min_max); \ + } + +#define show_uncore_min_max(name, min_max) \ + static ssize_t show_##name(struct kobject *kobj, \ + struct kobj_attribute *attr, char *buf)\ + { \ + struct uncore_data *data = container_of(attr, struct uncore_data, name##_kobj_attr);\ + \ + return show_min_max_freq_khz(data, buf, min_max); \ + } + +#define show_uncore_perf_status(name) \ + static ssize_t show_##name(struct kobject *kobj, \ + struct kobj_attribute *attr, char *buf)\ + { \ + struct uncore_data *data = container_of(attr, struct uncore_data, name##_kobj_attr);\ + \ + return show_perf_status_freq_khz(data, buf); \ + } + +store_uncore_min_max(min_freq_khz, 0); +store_uncore_min_max(max_freq_khz, 1); + +show_uncore_min_max(min_freq_khz, 0); +show_uncore_min_max(max_freq_khz, 1); + +show_uncore_perf_status(current_freq_khz); + +#define show_uncore_data(member_name) \ + static ssize_t show_##member_name(struct kobject *kobj, \ + struct kobj_attribute *attr, char *buf)\ + { \ + struct uncore_data *data = container_of(attr, struct uncore_data,\ + member_name##_kobj_attr);\ + \ + return sysfs_emit(buf, "%u\n", \ + data->member_name); \ + } \ + +show_uncore_data(initial_min_freq_khz); +show_uncore_data(initial_max_freq_khz); + +#define init_attribute_rw(_name) \ + do { \ + sysfs_attr_init(&data->_name##_kobj_attr.attr); \ + data->_name##_kobj_attr.show = show_##_name; \ + data->_name##_kobj_attr.store = store_##_name; \ + data->_name##_kobj_attr.attr.name = #_name; \ + data->_name##_kobj_attr.attr.mode = 0644; \ + } while (0) + +#define init_attribute_ro(_name) \ + do { \ + sysfs_attr_init(&data->_name##_kobj_attr.attr); \ + data->_name##_kobj_attr.show = show_##_name; \ + data->_name##_kobj_attr.store = NULL; \ + data->_name##_kobj_attr.attr.name = #_name; \ + data->_name##_kobj_attr.attr.mode = 0444; \ + } while (0) + +#define init_attribute_root_ro(_name) \ + do { \ + sysfs_attr_init(&data->_name##_kobj_attr.attr); \ + data->_name##_kobj_attr.show = show_##_name; \ + data->_name##_kobj_attr.store = NULL; \ + data->_name##_kobj_attr.attr.name = #_name; \ + data->_name##_kobj_attr.attr.mode = 0400; \ + } while (0) + +static int create_attr_group(struct uncore_data *data, char *name) +{ + int ret, freq, index = 0; + + init_attribute_rw(max_freq_khz); + init_attribute_rw(min_freq_khz); + init_attribute_ro(initial_min_freq_khz); + init_attribute_ro(initial_max_freq_khz); + init_attribute_root_ro(current_freq_khz); + + data->uncore_attrs[index++] = &data->max_freq_khz_kobj_attr.attr; + data->uncore_attrs[index++] = &data->min_freq_khz_kobj_attr.attr; + data->uncore_attrs[index++] = &data->initial_min_freq_khz_kobj_attr.attr; + data->uncore_attrs[index++] = &data->initial_max_freq_khz_kobj_attr.attr; + + ret = uncore_read_freq(data, &freq); + if (!ret) + data->uncore_attrs[index++] = &data->current_freq_khz_kobj_attr.attr; + + data->uncore_attrs[index] = NULL; + + data->uncore_attr_group.name = name; + data->uncore_attr_group.attrs = data->uncore_attrs; + ret = sysfs_create_group(uncore_root_kobj, &data->uncore_attr_group); + + return ret; +} + +static void delete_attr_group(struct uncore_data *data, char *name) +{ + sysfs_remove_group(uncore_root_kobj, &data->uncore_attr_group); +} + +int uncore_freq_add_entry(struct uncore_data *data, int cpu) +{ + int ret = 0; + + mutex_lock(&uncore_lock); + if (data->valid) { + /* control cpu changed */ + data->control_cpu = cpu; + goto uncore_unlock; + } + + sprintf(data->name, "package_%02d_die_%02d", data->package_id, data->die_id); + + uncore_read(data, &data->initial_min_freq_khz, &data->initial_max_freq_khz); + + ret = create_attr_group(data, data->name); + if (!ret) { + data->control_cpu = cpu; + data->valid = true; + } + +uncore_unlock: + mutex_unlock(&uncore_lock); + + return ret; +} +EXPORT_SYMBOL_NS_GPL(uncore_freq_add_entry, INTEL_UNCORE_FREQUENCY); + +void uncore_freq_remove_die_entry(struct uncore_data *data) +{ + mutex_lock(&uncore_lock); + delete_attr_group(data, data->name); + data->control_cpu = -1; + data->valid = false; + mutex_unlock(&uncore_lock); +} +EXPORT_SYMBOL_NS_GPL(uncore_freq_remove_die_entry, INTEL_UNCORE_FREQUENCY); + +int uncore_freq_common_init(int (*read_control_freq)(struct uncore_data *data, unsigned int *min, unsigned int *max), + int (*write_control_freq)(struct uncore_data *data, unsigned int input, unsigned int set_max), + int (*read_freq)(struct uncore_data *data, unsigned int *freq)) +{ + mutex_lock(&uncore_lock); + + uncore_read = read_control_freq; + uncore_write = write_control_freq; + uncore_read_freq = read_freq; + + if (!uncore_root_kobj) + uncore_root_kobj = kobject_create_and_add("intel_uncore_frequency", + &cpu_subsys.dev_root->kobj); + if (uncore_root_kobj) + ++uncore_instance_count; + mutex_unlock(&uncore_lock); + + return uncore_root_kobj ? 0 : -ENOMEM; +} +EXPORT_SYMBOL_NS_GPL(uncore_freq_common_init, INTEL_UNCORE_FREQUENCY); + +void uncore_freq_common_exit(void) +{ + mutex_lock(&uncore_lock); + --uncore_instance_count; + if (!uncore_instance_count) { + kobject_put(uncore_root_kobj); + uncore_root_kobj = NULL; + } + mutex_unlock(&uncore_lock); +} +EXPORT_SYMBOL_NS_GPL(uncore_freq_common_exit, INTEL_UNCORE_FREQUENCY); + + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel Uncore Frequency Common Module"); diff --git a/drivers/platform/x86/intel/uncore-frequency/uncore-frequency-common.h b/drivers/platform/x86/intel/uncore-frequency/uncore-frequency-common.h new file mode 100644 index 000000000..2d9dc3151 --- /dev/null +++ b/drivers/platform/x86/intel/uncore-frequency/uncore-frequency-common.h @@ -0,0 +1,62 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Intel Uncore Frequency Control: Common defines and prototypes + * Copyright (c) 2022, Intel Corporation. + * All rights reserved. + * + */ + +#ifndef __INTEL_UNCORE_FREQ_COMMON_H +#define __INTEL_UNCORE_FREQ_COMMON_H + +#include <linux/device.h> + +/** + * struct uncore_data - Encapsulate all uncore data + * @stored_uncore_data: Last user changed MSR 620 value, which will be restored + * on system resume. + * @initial_min_freq_khz: Sampled minimum uncore frequency at driver init + * @initial_max_freq_khz: Sampled maximum uncore frequency at driver init + * @control_cpu: Designated CPU for a die to read/write + * @valid: Mark the data valid/invalid + * @package_id: Package id for this instance + * @die_id: Die id for this instance + * @name: Sysfs entry name for this instance + * @uncore_attr_group: Attribute group storage + * @max_freq_khz_dev_attr: Storage for kobject attribute max_freq_khz + * @mix_freq_khz_dev_attr: Storage for kobject attribute min_freq_khz + * @initial_max_freq_khz_dev_attr: Storage for kobject attribute initial_max_freq_khz + * @initial_min_freq_khz_dev_attr: Storage for kobject attribute initial_min_freq_khz + * @current_freq_khz_dev_attr: Storage for kobject attribute current_freq_khz + * @uncore_attrs: Attribute storage for group creation + * + * This structure is used to encapsulate all data related to uncore sysfs + * settings for a die/package. + */ +struct uncore_data { + u64 stored_uncore_data; + u32 initial_min_freq_khz; + u32 initial_max_freq_khz; + int control_cpu; + bool valid; + int package_id; + int die_id; + char name[32]; + + struct attribute_group uncore_attr_group; + struct kobj_attribute max_freq_khz_kobj_attr; + struct kobj_attribute min_freq_khz_kobj_attr; + struct kobj_attribute initial_max_freq_khz_kobj_attr; + struct kobj_attribute initial_min_freq_khz_kobj_attr; + struct kobj_attribute current_freq_khz_kobj_attr; + struct attribute *uncore_attrs[6]; +}; + +int uncore_freq_common_init(int (*read_control_freq)(struct uncore_data *data, unsigned int *min, unsigned int *max), + int (*write_control_freq)(struct uncore_data *data, unsigned int input, unsigned int min_max), + int (*uncore_read_freq)(struct uncore_data *data, unsigned int *freq)); +void uncore_freq_common_exit(void); +int uncore_freq_add_entry(struct uncore_data *data, int cpu); +void uncore_freq_remove_die_entry(struct uncore_data *data); + +#endif diff --git a/drivers/platform/x86/intel/uncore-frequency/uncore-frequency.c b/drivers/platform/x86/intel/uncore-frequency/uncore-frequency.c new file mode 100644 index 000000000..00ac7e381 --- /dev/null +++ b/drivers/platform/x86/intel/uncore-frequency/uncore-frequency.c @@ -0,0 +1,276 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel Uncore Frequency Setting + * Copyright (c) 2022, Intel Corporation. + * All rights reserved. + * + * Provide interface to set MSR 620 at a granularity of per die. On CPU online, + * one control CPU is identified per die to read/write limit. This control CPU + * is changed, if the CPU state is changed to offline. When the last CPU is + * offline in a die then remove the sysfs object for that die. + * The majority of actual code is related to sysfs create and read/write + * attributes. + * + * Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> + */ + +#include <linux/cpu.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/suspend.h> +#include <asm/cpu_device_id.h> +#include <asm/intel-family.h> + +#include "uncore-frequency-common.h" + +/* Max instances for uncore data, one for each die */ +static int uncore_max_entries __read_mostly; +/* Storage for uncore data for all instances */ +static struct uncore_data *uncore_instances; +/* Stores the CPU mask of the target CPUs to use during uncore read/write */ +static cpumask_t uncore_cpu_mask; +/* CPU online callback register instance */ +static enum cpuhp_state uncore_hp_state __read_mostly; + +#define MSR_UNCORE_RATIO_LIMIT 0x620 +#define MSR_UNCORE_PERF_STATUS 0x621 +#define UNCORE_FREQ_KHZ_MULTIPLIER 100000 + +static int uncore_read_control_freq(struct uncore_data *data, unsigned int *min, + unsigned int *max) +{ + u64 cap; + int ret; + + if (data->control_cpu < 0) + return -ENXIO; + + ret = rdmsrl_on_cpu(data->control_cpu, MSR_UNCORE_RATIO_LIMIT, &cap); + if (ret) + return ret; + + *max = (cap & 0x7F) * UNCORE_FREQ_KHZ_MULTIPLIER; + *min = ((cap & GENMASK(14, 8)) >> 8) * UNCORE_FREQ_KHZ_MULTIPLIER; + + return 0; +} + +static int uncore_write_control_freq(struct uncore_data *data, unsigned int input, + unsigned int min_max) +{ + int ret; + u64 cap; + + input /= UNCORE_FREQ_KHZ_MULTIPLIER; + if (!input || input > 0x7F) + return -EINVAL; + + if (data->control_cpu < 0) + return -ENXIO; + + ret = rdmsrl_on_cpu(data->control_cpu, MSR_UNCORE_RATIO_LIMIT, &cap); + if (ret) + return ret; + + if (min_max) { + cap &= ~0x7F; + cap |= input; + } else { + cap &= ~GENMASK(14, 8); + cap |= (input << 8); + } + + ret = wrmsrl_on_cpu(data->control_cpu, MSR_UNCORE_RATIO_LIMIT, cap); + if (ret) + return ret; + + data->stored_uncore_data = cap; + + return 0; +} + +static int uncore_read_freq(struct uncore_data *data, unsigned int *freq) +{ + u64 ratio; + int ret; + + if (data->control_cpu < 0) + return -ENXIO; + + ret = rdmsrl_on_cpu(data->control_cpu, MSR_UNCORE_PERF_STATUS, &ratio); + if (ret) + return ret; + + *freq = (ratio & 0x7F) * UNCORE_FREQ_KHZ_MULTIPLIER; + + return 0; +} + +/* Caller provides protection */ +static struct uncore_data *uncore_get_instance(unsigned int cpu) +{ + int id = topology_logical_die_id(cpu); + + if (id >= 0 && id < uncore_max_entries) + return &uncore_instances[id]; + + return NULL; +} + +static int uncore_event_cpu_online(unsigned int cpu) +{ + struct uncore_data *data; + int target; + + /* Check if there is an online cpu in the package for uncore MSR */ + target = cpumask_any_and(&uncore_cpu_mask, topology_die_cpumask(cpu)); + if (target < nr_cpu_ids) + return 0; + + /* Use this CPU on this die as a control CPU */ + cpumask_set_cpu(cpu, &uncore_cpu_mask); + + data = uncore_get_instance(cpu); + if (!data) + return 0; + + data->package_id = topology_physical_package_id(cpu); + data->die_id = topology_die_id(cpu); + + return uncore_freq_add_entry(data, cpu); +} + +static int uncore_event_cpu_offline(unsigned int cpu) +{ + struct uncore_data *data; + int target; + + data = uncore_get_instance(cpu); + if (!data) + return 0; + + /* Check if existing cpu is used for uncore MSRs */ + if (!cpumask_test_and_clear_cpu(cpu, &uncore_cpu_mask)) + return 0; + + /* Find a new cpu to set uncore MSR */ + target = cpumask_any_but(topology_die_cpumask(cpu), cpu); + + if (target < nr_cpu_ids) { + cpumask_set_cpu(target, &uncore_cpu_mask); + uncore_freq_add_entry(data, target); + } else { + uncore_freq_remove_die_entry(data); + } + + return 0; +} + +static int uncore_pm_notify(struct notifier_block *nb, unsigned long mode, + void *_unused) +{ + int i; + + switch (mode) { + case PM_POST_HIBERNATION: + case PM_POST_RESTORE: + case PM_POST_SUSPEND: + for (i = 0; i < uncore_max_entries; ++i) { + struct uncore_data *data = &uncore_instances[i]; + + if (!data || !data->valid || !data->stored_uncore_data) + return 0; + + wrmsrl_on_cpu(data->control_cpu, MSR_UNCORE_RATIO_LIMIT, + data->stored_uncore_data); + } + break; + default: + break; + } + return 0; +} + +static struct notifier_block uncore_pm_nb = { + .notifier_call = uncore_pm_notify, +}; + +static const struct x86_cpu_id intel_uncore_cpu_ids[] = { + X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_G, NULL), + X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_X, NULL), + X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_D, NULL), + X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_X, NULL), + X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X, NULL), + X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_D, NULL), + X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X, NULL), + X86_MATCH_INTEL_FAM6_MODEL(EMERALDRAPIDS_X, NULL), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, intel_uncore_cpu_ids); + +static int __init intel_uncore_init(void) +{ + const struct x86_cpu_id *id; + int ret; + + if (cpu_feature_enabled(X86_FEATURE_HYPERVISOR)) + return -ENODEV; + + id = x86_match_cpu(intel_uncore_cpu_ids); + if (!id) + return -ENODEV; + + uncore_max_entries = topology_max_packages() * + topology_max_die_per_package(); + uncore_instances = kcalloc(uncore_max_entries, + sizeof(*uncore_instances), GFP_KERNEL); + if (!uncore_instances) + return -ENOMEM; + + ret = uncore_freq_common_init(uncore_read_control_freq, uncore_write_control_freq, + uncore_read_freq); + if (ret) + goto err_free; + + ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, + "platform/x86/uncore-freq:online", + uncore_event_cpu_online, + uncore_event_cpu_offline); + if (ret < 0) + goto err_rem_kobj; + + uncore_hp_state = ret; + + ret = register_pm_notifier(&uncore_pm_nb); + if (ret) + goto err_rem_state; + + return 0; + +err_rem_state: + cpuhp_remove_state(uncore_hp_state); +err_rem_kobj: + uncore_freq_common_exit(); +err_free: + kfree(uncore_instances); + + return ret; +} +module_init(intel_uncore_init) + +static void __exit intel_uncore_exit(void) +{ + int i; + + unregister_pm_notifier(&uncore_pm_nb); + cpuhp_remove_state(uncore_hp_state); + for (i = 0; i < uncore_max_entries; ++i) + uncore_freq_remove_die_entry(&uncore_instances[i]); + uncore_freq_common_exit(); + kfree(uncore_instances); +} +module_exit(intel_uncore_exit) + +MODULE_IMPORT_NS(INTEL_UNCORE_FREQUENCY); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel Uncore Frequency Limits Driver"); diff --git a/drivers/platform/x86/intel/vbtn.c b/drivers/platform/x86/intel/vbtn.c new file mode 100644 index 000000000..8e2b07ed2 --- /dev/null +++ b/drivers/platform/x86/intel/vbtn.c @@ -0,0 +1,422 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Intel Virtual Button driver for Windows 8.1+ + * + * Copyright (C) 2016 AceLan Kao <acelan.kao@canonical.com> + * Copyright (C) 2016 Alex Hung <alex.hung@canonical.com> + */ + +#include <linux/acpi.h> +#include <linux/dmi.h> +#include <linux/input.h> +#include <linux/input/sparse-keymap.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/suspend.h> +#include "../dual_accel_detect.h" + +/* Returned when NOT in tablet mode on some HP Stream x360 11 models */ +#define VGBS_TABLET_MODE_FLAG_ALT 0x10 +/* When NOT in tablet mode, VGBS returns with the flag 0x40 */ +#define VGBS_TABLET_MODE_FLAG 0x40 +#define VGBS_DOCK_MODE_FLAG 0x80 + +#define VGBS_TABLET_MODE_FLAGS (VGBS_TABLET_MODE_FLAG | VGBS_TABLET_MODE_FLAG_ALT) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("AceLan Kao"); + +static const struct acpi_device_id intel_vbtn_ids[] = { + {"INT33D6", 0}, + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, intel_vbtn_ids); + +/* In theory, these are HID usages. */ +static const struct key_entry intel_vbtn_keymap[] = { + { KE_KEY, 0xC0, { KEY_POWER } }, /* power key press */ + { KE_IGNORE, 0xC1, { KEY_POWER } }, /* power key release */ + { KE_KEY, 0xC2, { KEY_LEFTMETA } }, /* 'Windows' key press */ + { KE_KEY, 0xC3, { KEY_LEFTMETA } }, /* 'Windows' key release */ + { KE_KEY, 0xC4, { KEY_VOLUMEUP } }, /* volume-up key press */ + { KE_IGNORE, 0xC5, { KEY_VOLUMEUP } }, /* volume-up key release */ + { KE_KEY, 0xC6, { KEY_VOLUMEDOWN } }, /* volume-down key press */ + { KE_IGNORE, 0xC7, { KEY_VOLUMEDOWN } }, /* volume-down key release */ + { KE_KEY, 0xC8, { KEY_ROTATE_LOCK_TOGGLE } }, /* rotate-lock key press */ + { KE_KEY, 0xC9, { KEY_ROTATE_LOCK_TOGGLE } }, /* rotate-lock key release */ + { KE_END } +}; + +static const struct key_entry intel_vbtn_switchmap[] = { + /* + * SW_DOCK should only be reported for docking stations, but DSDTs using the + * intel-vbtn code, always seem to use this for 2-in-1s / convertibles and set + * SW_DOCK=1 when in laptop-mode (in tandem with setting SW_TABLET_MODE=0). + * This causes userspace to think the laptop is docked to a port-replicator + * and to disable suspend-on-lid-close, which is undesirable. + * Map the dock events to KEY_IGNORE to avoid this broken SW_DOCK reporting. + */ + { KE_IGNORE, 0xCA, { .sw = { SW_DOCK, 1 } } }, /* Docked */ + { KE_IGNORE, 0xCB, { .sw = { SW_DOCK, 0 } } }, /* Undocked */ + { KE_SW, 0xCC, { .sw = { SW_TABLET_MODE, 1 } } }, /* Tablet */ + { KE_SW, 0xCD, { .sw = { SW_TABLET_MODE, 0 } } }, /* Laptop */ + { KE_END } +}; + +struct intel_vbtn_priv { + struct input_dev *buttons_dev; + struct input_dev *switches_dev; + bool dual_accel; + bool has_buttons; + bool has_switches; + bool wakeup_mode; +}; + +static void detect_tablet_mode(struct device *dev) +{ + struct intel_vbtn_priv *priv = dev_get_drvdata(dev); + acpi_handle handle = ACPI_HANDLE(dev); + unsigned long long vgbs; + acpi_status status; + int m; + + status = acpi_evaluate_integer(handle, "VGBS", NULL, &vgbs); + if (ACPI_FAILURE(status)) + return; + + m = !(vgbs & VGBS_TABLET_MODE_FLAGS); + input_report_switch(priv->switches_dev, SW_TABLET_MODE, m); + m = (vgbs & VGBS_DOCK_MODE_FLAG) ? 1 : 0; + input_report_switch(priv->switches_dev, SW_DOCK, m); + + input_sync(priv->switches_dev); +} + +/* + * Note this unconditionally creates the 2 input_dev-s and sets up + * the sparse-keymaps. Only the registration is conditional on + * have_buttons / have_switches. This is done so that the notify + * handler can always call sparse_keymap_entry_from_scancode() + * on the input_dev-s do determine the event type. + */ +static int intel_vbtn_input_setup(struct platform_device *device) +{ + struct intel_vbtn_priv *priv = dev_get_drvdata(&device->dev); + int ret; + + priv->buttons_dev = devm_input_allocate_device(&device->dev); + if (!priv->buttons_dev) + return -ENOMEM; + + ret = sparse_keymap_setup(priv->buttons_dev, intel_vbtn_keymap, NULL); + if (ret) + return ret; + + priv->buttons_dev->dev.parent = &device->dev; + priv->buttons_dev->name = "Intel Virtual Buttons"; + priv->buttons_dev->id.bustype = BUS_HOST; + + if (priv->has_buttons) { + ret = input_register_device(priv->buttons_dev); + if (ret) + return ret; + } + + priv->switches_dev = devm_input_allocate_device(&device->dev); + if (!priv->switches_dev) + return -ENOMEM; + + ret = sparse_keymap_setup(priv->switches_dev, intel_vbtn_switchmap, NULL); + if (ret) + return ret; + + priv->switches_dev->dev.parent = &device->dev; + priv->switches_dev->name = "Intel Virtual Switches"; + priv->switches_dev->id.bustype = BUS_HOST; + + if (priv->has_switches) { + detect_tablet_mode(&device->dev); + + ret = input_register_device(priv->switches_dev); + if (ret) + return ret; + } + + return 0; +} + +static void notify_handler(acpi_handle handle, u32 event, void *context) +{ + struct platform_device *device = context; + struct intel_vbtn_priv *priv = dev_get_drvdata(&device->dev); + unsigned int val = !(event & 1); /* Even=press, Odd=release */ + const struct key_entry *ke, *ke_rel; + struct input_dev *input_dev; + bool autorelease; + int ret; + + if ((ke = sparse_keymap_entry_from_scancode(priv->buttons_dev, event))) { + if (!priv->has_buttons) { + dev_warn(&device->dev, "Warning: received a button event on a device without buttons, please report this.\n"); + return; + } + input_dev = priv->buttons_dev; + } else if ((ke = sparse_keymap_entry_from_scancode(priv->switches_dev, event))) { + if (!priv->has_switches) { + /* See dual_accel_detect.h for more info */ + if (priv->dual_accel) + return; + + dev_info(&device->dev, "Registering Intel Virtual Switches input-dev after receiving a switch event\n"); + ret = input_register_device(priv->switches_dev); + if (ret) + return; + + priv->has_switches = true; + } + input_dev = priv->switches_dev; + } else { + dev_dbg(&device->dev, "unknown event index 0x%x\n", event); + return; + } + + if (priv->wakeup_mode) { + pm_wakeup_hard_event(&device->dev); + + /* + * Skip reporting an evdev event for button wake events, + * mirroring how the drivers/acpi/button.c code skips this too. + */ + if (ke->type == KE_KEY) + return; + } + + /* + * Even press events are autorelease if there is no corresponding odd + * release event, or if the odd event is KE_IGNORE. + */ + ke_rel = sparse_keymap_entry_from_scancode(input_dev, event | 1); + autorelease = val && (!ke_rel || ke_rel->type == KE_IGNORE); + + sparse_keymap_report_event(input_dev, event, val, autorelease); + + /* Some devices need this to report further events */ + acpi_evaluate_object(handle, "VBDL", NULL, NULL); +} + +/* + * There are several laptops (non 2-in-1) models out there which support VGBS, + * but simply always return 0, which we translate to SW_TABLET_MODE=1. This in + * turn causes userspace (libinput) to suppress events from the builtin + * keyboard and touchpad, making the laptop essentially unusable. + * + * Since the problem of wrongly reporting SW_TABLET_MODE=1 in combination + * with libinput, leads to a non-usable system. Where as OTOH many people will + * not even notice when SW_TABLET_MODE is not being reported, a DMI based allow + * list is used here. This list mainly matches on the chassis-type of 2-in-1s. + * + * There are also some 2-in-1s which use the intel-vbtn ACPI interface to report + * SW_TABLET_MODE with a chassis-type of 8 ("Portable") or 10 ("Notebook"), + * these are matched on a per model basis, since many normal laptops with a + * possible broken VGBS ACPI-method also use these chassis-types. + */ +static const struct dmi_system_id dmi_switches_allow_list[] = { + { + .matches = { + DMI_EXACT_MATCH(DMI_CHASSIS_TYPE, "31" /* Convertible */), + }, + }, + { + .matches = { + DMI_EXACT_MATCH(DMI_CHASSIS_TYPE, "32" /* Detachable */), + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Venue 11 Pro 7130"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion 13 x360 PC"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Switch SA5-271"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7352"), + }, + }, + {} /* Array terminator */ +}; + +static bool intel_vbtn_has_switches(acpi_handle handle, bool dual_accel) +{ + unsigned long long vgbs; + acpi_status status; + + /* See dual_accel_detect.h for more info */ + if (dual_accel) + return false; + + if (!dmi_check_system(dmi_switches_allow_list)) + return false; + + status = acpi_evaluate_integer(handle, "VGBS", NULL, &vgbs); + return ACPI_SUCCESS(status); +} + +static int intel_vbtn_probe(struct platform_device *device) +{ + acpi_handle handle = ACPI_HANDLE(&device->dev); + bool dual_accel, has_buttons, has_switches; + struct intel_vbtn_priv *priv; + acpi_status status; + int err; + + dual_accel = dual_accel_detect(); + has_buttons = acpi_has_method(handle, "VBDL"); + has_switches = intel_vbtn_has_switches(handle, dual_accel); + + if (!has_buttons && !has_switches) { + dev_warn(&device->dev, "failed to read Intel Virtual Button driver\n"); + return -ENODEV; + } + + priv = devm_kzalloc(&device->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + dev_set_drvdata(&device->dev, priv); + + priv->dual_accel = dual_accel; + priv->has_buttons = has_buttons; + priv->has_switches = has_switches; + + err = intel_vbtn_input_setup(device); + if (err) { + pr_err("Failed to setup Intel Virtual Button\n"); + return err; + } + + status = acpi_install_notify_handler(handle, + ACPI_DEVICE_NOTIFY, + notify_handler, + device); + if (ACPI_FAILURE(status)) + return -EBUSY; + + if (has_buttons) { + status = acpi_evaluate_object(handle, "VBDL", NULL, NULL); + if (ACPI_FAILURE(status)) + dev_err(&device->dev, "Error VBDL failed with ACPI status %d\n", status); + } + + device_init_wakeup(&device->dev, true); + /* + * In order for system wakeup to work, the EC GPE has to be marked as + * a wakeup one, so do that here (this setting will persist, but it has + * no effect until the wakeup mask is set for the EC GPE). + */ + acpi_ec_mark_gpe_for_wake(); + return 0; +} + +static int intel_vbtn_remove(struct platform_device *device) +{ + acpi_handle handle = ACPI_HANDLE(&device->dev); + + device_init_wakeup(&device->dev, false); + acpi_remove_notify_handler(handle, ACPI_DEVICE_NOTIFY, notify_handler); + + /* + * Even if we failed to shut off the event stream, we can still + * safely detach from the device. + */ + return 0; +} + +static int intel_vbtn_pm_prepare(struct device *dev) +{ + if (device_may_wakeup(dev)) { + struct intel_vbtn_priv *priv = dev_get_drvdata(dev); + + priv->wakeup_mode = true; + } + return 0; +} + +static void intel_vbtn_pm_complete(struct device *dev) +{ + struct intel_vbtn_priv *priv = dev_get_drvdata(dev); + + priv->wakeup_mode = false; +} + +static int intel_vbtn_pm_resume(struct device *dev) +{ + struct intel_vbtn_priv *priv = dev_get_drvdata(dev); + + intel_vbtn_pm_complete(dev); + + if (priv->has_switches) + detect_tablet_mode(dev); + + return 0; +} + +static const struct dev_pm_ops intel_vbtn_pm_ops = { + .prepare = intel_vbtn_pm_prepare, + .complete = intel_vbtn_pm_complete, + .resume = intel_vbtn_pm_resume, + .restore = intel_vbtn_pm_resume, + .thaw = intel_vbtn_pm_resume, +}; + +static struct platform_driver intel_vbtn_pl_driver = { + .driver = { + .name = "intel-vbtn", + .acpi_match_table = intel_vbtn_ids, + .pm = &intel_vbtn_pm_ops, + }, + .probe = intel_vbtn_probe, + .remove = intel_vbtn_remove, +}; + +static acpi_status __init +check_acpi_dev(acpi_handle handle, u32 lvl, void *context, void **rv) +{ + const struct acpi_device_id *ids = context; + struct acpi_device *dev = acpi_fetch_acpi_dev(handle); + + if (dev && acpi_match_device_ids(dev, ids) == 0) + if (!IS_ERR_OR_NULL(acpi_create_platform_device(dev, NULL))) + dev_info(&dev->dev, + "intel-vbtn: created platform device\n"); + + return AE_OK; +} + +static int __init intel_vbtn_init(void) +{ + acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, check_acpi_dev, NULL, + (void *)intel_vbtn_ids, NULL); + + return platform_driver_register(&intel_vbtn_pl_driver); +} +module_init(intel_vbtn_init); + +static void __exit intel_vbtn_exit(void) +{ + platform_driver_unregister(&intel_vbtn_pl_driver); +} +module_exit(intel_vbtn_exit); diff --git a/drivers/platform/x86/intel/vsec.c b/drivers/platform/x86/intel/vsec.c new file mode 100644 index 000000000..40477d1d4 --- /dev/null +++ b/drivers/platform/x86/intel/vsec.c @@ -0,0 +1,517 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel Vendor Specific Extended Capabilities auxiliary bus driver + * + * Copyright (c) 2021, Intel Corporation. + * All Rights Reserved. + * + * Author: David E. Box <david.e.box@linux.intel.com> + * + * This driver discovers and creates auxiliary devices for Intel defined PCIe + * "Vendor Specific" and "Designated Vendor Specific" Extended Capabilities, + * VSEC and DVSEC respectively. The driver supports features on specific PCIe + * endpoints that exist primarily to expose them. + */ + +#include <linux/auxiliary_bus.h> +#include <linux/bits.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/idr.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/types.h> + +#include "vsec.h" + +/* Intel DVSEC offsets */ +#define INTEL_DVSEC_ENTRIES 0xA +#define INTEL_DVSEC_SIZE 0xB +#define INTEL_DVSEC_TABLE 0xC +#define INTEL_DVSEC_TABLE_BAR(x) ((x) & GENMASK(2, 0)) +#define INTEL_DVSEC_TABLE_OFFSET(x) ((x) & GENMASK(31, 3)) +#define TABLE_OFFSET_SHIFT 3 +#define PMT_XA_START 0 +#define PMT_XA_MAX INT_MAX +#define PMT_XA_LIMIT XA_LIMIT(PMT_XA_START, PMT_XA_MAX) + +static DEFINE_IDA(intel_vsec_ida); +static DEFINE_IDA(intel_vsec_sdsi_ida); +static DEFINE_XARRAY_ALLOC(auxdev_array); + +/** + * struct intel_vsec_header - Common fields of Intel VSEC and DVSEC registers. + * @rev: Revision ID of the VSEC/DVSEC register space + * @length: Length of the VSEC/DVSEC register space + * @id: ID of the feature + * @num_entries: Number of instances of the feature + * @entry_size: Size of the discovery table for each feature + * @tbir: BAR containing the discovery tables + * @offset: BAR offset of start of the first discovery table + */ +struct intel_vsec_header { + u8 rev; + u16 length; + u16 id; + u8 num_entries; + u8 entry_size; + u8 tbir; + u32 offset; +}; + +enum intel_vsec_id { + VSEC_ID_TELEMETRY = 2, + VSEC_ID_WATCHER = 3, + VSEC_ID_CRASHLOG = 4, + VSEC_ID_SDSI = 65, +}; + +static enum intel_vsec_id intel_vsec_allow_list[] = { + VSEC_ID_TELEMETRY, + VSEC_ID_WATCHER, + VSEC_ID_CRASHLOG, + VSEC_ID_SDSI, +}; + +static const char *intel_vsec_name(enum intel_vsec_id id) +{ + switch (id) { + case VSEC_ID_TELEMETRY: + return "telemetry"; + + case VSEC_ID_WATCHER: + return "watcher"; + + case VSEC_ID_CRASHLOG: + return "crashlog"; + + case VSEC_ID_SDSI: + return "sdsi"; + + default: + return NULL; + } +} + +static bool intel_vsec_allowed(u16 id) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(intel_vsec_allow_list); i++) + if (intel_vsec_allow_list[i] == id) + return true; + + return false; +} + +static bool intel_vsec_disabled(u16 id, unsigned long quirks) +{ + switch (id) { + case VSEC_ID_WATCHER: + return !!(quirks & VSEC_QUIRK_NO_WATCHER); + + case VSEC_ID_CRASHLOG: + return !!(quirks & VSEC_QUIRK_NO_CRASHLOG); + + default: + return false; + } +} + +static void intel_vsec_remove_aux(void *data) +{ + auxiliary_device_delete(data); + auxiliary_device_uninit(data); +} + +static DEFINE_MUTEX(vsec_ida_lock); + +static void intel_vsec_dev_release(struct device *dev) +{ + struct intel_vsec_device *intel_vsec_dev = dev_to_ivdev(dev); + + xa_erase(&auxdev_array, intel_vsec_dev->id); + + mutex_lock(&vsec_ida_lock); + ida_free(intel_vsec_dev->ida, intel_vsec_dev->auxdev.id); + mutex_unlock(&vsec_ida_lock); + + kfree(intel_vsec_dev->resource); + kfree(intel_vsec_dev); +} + +int intel_vsec_add_aux(struct pci_dev *pdev, struct device *parent, + struct intel_vsec_device *intel_vsec_dev, + const char *name) +{ + struct auxiliary_device *auxdev = &intel_vsec_dev->auxdev; + int ret, id; + + ret = xa_alloc(&auxdev_array, &intel_vsec_dev->id, intel_vsec_dev, + PMT_XA_LIMIT, GFP_KERNEL); + if (ret < 0) { + kfree(intel_vsec_dev->resource); + kfree(intel_vsec_dev); + return ret; + } + + mutex_lock(&vsec_ida_lock); + id = ida_alloc(intel_vsec_dev->ida, GFP_KERNEL); + mutex_unlock(&vsec_ida_lock); + if (id < 0) { + xa_erase(&auxdev_array, intel_vsec_dev->id); + kfree(intel_vsec_dev->resource); + kfree(intel_vsec_dev); + return id; + } + + if (!parent) + parent = &pdev->dev; + + auxdev->id = id; + auxdev->name = name; + auxdev->dev.parent = parent; + auxdev->dev.release = intel_vsec_dev_release; + + ret = auxiliary_device_init(auxdev); + if (ret < 0) { + mutex_lock(&vsec_ida_lock); + ida_free(intel_vsec_dev->ida, auxdev->id); + mutex_unlock(&vsec_ida_lock); + kfree(intel_vsec_dev->resource); + kfree(intel_vsec_dev); + return ret; + } + + ret = auxiliary_device_add(auxdev); + if (ret < 0) { + auxiliary_device_uninit(auxdev); + return ret; + } + + ret = devm_add_action_or_reset(parent, intel_vsec_remove_aux, + auxdev); + if (ret < 0) + return ret; + + return 0; +} +EXPORT_SYMBOL_NS_GPL(intel_vsec_add_aux, INTEL_VSEC); + +static int intel_vsec_add_dev(struct pci_dev *pdev, struct intel_vsec_header *header, + struct intel_vsec_platform_info *info) +{ + struct intel_vsec_device *intel_vsec_dev; + struct resource *res, *tmp; + unsigned long quirks = info->quirks; + int i; + + if (!intel_vsec_allowed(header->id) || intel_vsec_disabled(header->id, quirks)) + return -EINVAL; + + if (!header->num_entries) { + dev_dbg(&pdev->dev, "Invalid 0 entry count for header id %d\n", header->id); + return -EINVAL; + } + + if (!header->entry_size) { + dev_dbg(&pdev->dev, "Invalid 0 entry size for header id %d\n", header->id); + return -EINVAL; + } + + intel_vsec_dev = kzalloc(sizeof(*intel_vsec_dev), GFP_KERNEL); + if (!intel_vsec_dev) + return -ENOMEM; + + res = kcalloc(header->num_entries, sizeof(*res), GFP_KERNEL); + if (!res) { + kfree(intel_vsec_dev); + return -ENOMEM; + } + + if (quirks & VSEC_QUIRK_TABLE_SHIFT) + header->offset >>= TABLE_OFFSET_SHIFT; + + /* + * The DVSEC/VSEC contains the starting offset and count for a block of + * discovery tables. Create a resource array of these tables to the + * auxiliary device driver. + */ + for (i = 0, tmp = res; i < header->num_entries; i++, tmp++) { + tmp->start = pdev->resource[header->tbir].start + + header->offset + i * (header->entry_size * sizeof(u32)); + tmp->end = tmp->start + (header->entry_size * sizeof(u32)) - 1; + tmp->flags = IORESOURCE_MEM; + } + + intel_vsec_dev->pcidev = pdev; + intel_vsec_dev->resource = res; + intel_vsec_dev->num_resources = header->num_entries; + intel_vsec_dev->info = info; + + if (header->id == VSEC_ID_SDSI) + intel_vsec_dev->ida = &intel_vsec_sdsi_ida; + else + intel_vsec_dev->ida = &intel_vsec_ida; + + return intel_vsec_add_aux(pdev, NULL, intel_vsec_dev, + intel_vsec_name(header->id)); +} + +static bool intel_vsec_walk_header(struct pci_dev *pdev, + struct intel_vsec_platform_info *info) +{ + struct intel_vsec_header **header = info->capabilities; + bool have_devices = false; + int ret; + + for ( ; *header; header++) { + ret = intel_vsec_add_dev(pdev, *header, info); + if (ret) + dev_info(&pdev->dev, "Could not add device for DVSEC id %d\n", + (*header)->id); + else + have_devices = true; + } + + return have_devices; +} + +static bool intel_vsec_walk_dvsec(struct pci_dev *pdev, + struct intel_vsec_platform_info *info) +{ + bool have_devices = false; + int pos = 0; + + do { + struct intel_vsec_header header; + u32 table, hdr; + u16 vid; + int ret; + + pos = pci_find_next_ext_capability(pdev, pos, PCI_EXT_CAP_ID_DVSEC); + if (!pos) + break; + + pci_read_config_dword(pdev, pos + PCI_DVSEC_HEADER1, &hdr); + vid = PCI_DVSEC_HEADER1_VID(hdr); + if (vid != PCI_VENDOR_ID_INTEL) + continue; + + /* Support only revision 1 */ + header.rev = PCI_DVSEC_HEADER1_REV(hdr); + if (header.rev != 1) { + dev_info(&pdev->dev, "Unsupported DVSEC revision %d\n", header.rev); + continue; + } + + header.length = PCI_DVSEC_HEADER1_LEN(hdr); + + pci_read_config_byte(pdev, pos + INTEL_DVSEC_ENTRIES, &header.num_entries); + pci_read_config_byte(pdev, pos + INTEL_DVSEC_SIZE, &header.entry_size); + pci_read_config_dword(pdev, pos + INTEL_DVSEC_TABLE, &table); + + header.tbir = INTEL_DVSEC_TABLE_BAR(table); + header.offset = INTEL_DVSEC_TABLE_OFFSET(table); + + pci_read_config_dword(pdev, pos + PCI_DVSEC_HEADER2, &hdr); + header.id = PCI_DVSEC_HEADER2_ID(hdr); + + ret = intel_vsec_add_dev(pdev, &header, info); + if (ret) + continue; + + have_devices = true; + } while (true); + + return have_devices; +} + +static bool intel_vsec_walk_vsec(struct pci_dev *pdev, + struct intel_vsec_platform_info *info) +{ + bool have_devices = false; + int pos = 0; + + do { + struct intel_vsec_header header; + u32 table, hdr; + int ret; + + pos = pci_find_next_ext_capability(pdev, pos, PCI_EXT_CAP_ID_VNDR); + if (!pos) + break; + + pci_read_config_dword(pdev, pos + PCI_VNDR_HEADER, &hdr); + + /* Support only revision 1 */ + header.rev = PCI_VNDR_HEADER_REV(hdr); + if (header.rev != 1) { + dev_info(&pdev->dev, "Unsupported VSEC revision %d\n", header.rev); + continue; + } + + header.id = PCI_VNDR_HEADER_ID(hdr); + header.length = PCI_VNDR_HEADER_LEN(hdr); + + /* entry, size, and table offset are the same as DVSEC */ + pci_read_config_byte(pdev, pos + INTEL_DVSEC_ENTRIES, &header.num_entries); + pci_read_config_byte(pdev, pos + INTEL_DVSEC_SIZE, &header.entry_size); + pci_read_config_dword(pdev, pos + INTEL_DVSEC_TABLE, &table); + + header.tbir = INTEL_DVSEC_TABLE_BAR(table); + header.offset = INTEL_DVSEC_TABLE_OFFSET(table); + + ret = intel_vsec_add_dev(pdev, &header, info); + if (ret) + continue; + + have_devices = true; + } while (true); + + return have_devices; +} + +static int intel_vsec_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct intel_vsec_platform_info *info; + bool have_devices = false; + int ret; + + ret = pcim_enable_device(pdev); + if (ret) + return ret; + + pci_save_state(pdev); + info = (struct intel_vsec_platform_info *)id->driver_data; + if (!info) + return -EINVAL; + + if (intel_vsec_walk_dvsec(pdev, info)) + have_devices = true; + + if (intel_vsec_walk_vsec(pdev, info)) + have_devices = true; + + if (info && (info->quirks & VSEC_QUIRK_NO_DVSEC) && + intel_vsec_walk_header(pdev, info)) + have_devices = true; + + if (!have_devices) + return -ENODEV; + + return 0; +} + +/* TGL info */ +static const struct intel_vsec_platform_info tgl_info = { + .quirks = VSEC_QUIRK_NO_WATCHER | VSEC_QUIRK_NO_CRASHLOG | + VSEC_QUIRK_TABLE_SHIFT | VSEC_QUIRK_EARLY_HW, +}; + +/* DG1 info */ +static struct intel_vsec_header dg1_telemetry = { + .length = 0x10, + .id = 2, + .num_entries = 1, + .entry_size = 3, + .tbir = 0, + .offset = 0x466000, +}; + +static struct intel_vsec_header *dg1_capabilities[] = { + &dg1_telemetry, + NULL +}; + +static const struct intel_vsec_platform_info dg1_info = { + .capabilities = dg1_capabilities, + .quirks = VSEC_QUIRK_NO_DVSEC | VSEC_QUIRK_EARLY_HW, +}; + +#define PCI_DEVICE_ID_INTEL_VSEC_ADL 0x467d +#define PCI_DEVICE_ID_INTEL_VSEC_DG1 0x490e +#define PCI_DEVICE_ID_INTEL_VSEC_OOBMSM 0x09a7 +#define PCI_DEVICE_ID_INTEL_VSEC_RPL 0xa77d +#define PCI_DEVICE_ID_INTEL_VSEC_TGL 0x9a0d +static const struct pci_device_id intel_vsec_pci_ids[] = { + { PCI_DEVICE_DATA(INTEL, VSEC_ADL, &tgl_info) }, + { PCI_DEVICE_DATA(INTEL, VSEC_DG1, &dg1_info) }, + { PCI_DEVICE_DATA(INTEL, VSEC_OOBMSM, &(struct intel_vsec_platform_info) {}) }, + { PCI_DEVICE_DATA(INTEL, VSEC_RPL, &tgl_info) }, + { PCI_DEVICE_DATA(INTEL, VSEC_TGL, &tgl_info) }, + { } +}; +MODULE_DEVICE_TABLE(pci, intel_vsec_pci_ids); + +static pci_ers_result_t intel_vsec_pci_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + pci_ers_result_t status = PCI_ERS_RESULT_NEED_RESET; + + dev_info(&pdev->dev, "PCI error detected, state %d", state); + + if (state == pci_channel_io_perm_failure) + status = PCI_ERS_RESULT_DISCONNECT; + else + pci_disable_device(pdev); + + return status; +} + +static pci_ers_result_t intel_vsec_pci_slot_reset(struct pci_dev *pdev) +{ + struct intel_vsec_device *intel_vsec_dev; + pci_ers_result_t status = PCI_ERS_RESULT_DISCONNECT; + const struct pci_device_id *pci_dev_id; + unsigned long index; + + dev_info(&pdev->dev, "Resetting PCI slot\n"); + + msleep(2000); + if (pci_enable_device(pdev)) { + dev_info(&pdev->dev, + "Failed to re-enable PCI device after reset.\n"); + goto out; + } + + status = PCI_ERS_RESULT_RECOVERED; + + xa_for_each(&auxdev_array, index, intel_vsec_dev) { + /* check if pdev doesn't match */ + if (pdev != intel_vsec_dev->pcidev) + continue; + devm_release_action(&pdev->dev, intel_vsec_remove_aux, + &intel_vsec_dev->auxdev); + } + pci_disable_device(pdev); + pci_restore_state(pdev); + pci_dev_id = pci_match_id(intel_vsec_pci_ids, pdev); + intel_vsec_pci_probe(pdev, pci_dev_id); + +out: + return status; +} + +static void intel_vsec_pci_resume(struct pci_dev *pdev) +{ + dev_info(&pdev->dev, "Done resuming PCI device\n"); +} + +static const struct pci_error_handlers intel_vsec_pci_err_handlers = { + .error_detected = intel_vsec_pci_error_detected, + .slot_reset = intel_vsec_pci_slot_reset, + .resume = intel_vsec_pci_resume, +}; + +static struct pci_driver intel_vsec_pci_driver = { + .name = "intel_vsec", + .id_table = intel_vsec_pci_ids, + .probe = intel_vsec_pci_probe, + .err_handler = &intel_vsec_pci_err_handlers, +}; +module_pci_driver(intel_vsec_pci_driver); + +MODULE_AUTHOR("David E. Box <david.e.box@linux.intel.com>"); +MODULE_DESCRIPTION("Intel Extended Capabilities auxiliary bus driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/platform/x86/intel/vsec.h b/drivers/platform/x86/intel/vsec.h new file mode 100644 index 000000000..330672588 --- /dev/null +++ b/drivers/platform/x86/intel/vsec.h @@ -0,0 +1,59 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _VSEC_H +#define _VSEC_H + +#include <linux/auxiliary_bus.h> +#include <linux/bits.h> + +struct pci_dev; +struct resource; + +enum intel_vsec_quirks { + /* Watcher feature not supported */ + VSEC_QUIRK_NO_WATCHER = BIT(0), + + /* Crashlog feature not supported */ + VSEC_QUIRK_NO_CRASHLOG = BIT(1), + + /* Use shift instead of mask to read discovery table offset */ + VSEC_QUIRK_TABLE_SHIFT = BIT(2), + + /* DVSEC not present (provided in driver data) */ + VSEC_QUIRK_NO_DVSEC = BIT(3), + + /* Platforms requiring quirk in the auxiliary driver */ + VSEC_QUIRK_EARLY_HW = BIT(4), +}; + +/* Platform specific data */ +struct intel_vsec_platform_info { + struct intel_vsec_header **capabilities; + unsigned long quirks; +}; + +struct intel_vsec_device { + struct auxiliary_device auxdev; + struct pci_dev *pcidev; + struct resource *resource; + struct ida *ida; + struct intel_vsec_platform_info *info; + int num_resources; + int id; /* xa */ + void *priv_data; + size_t priv_data_size; +}; + +int intel_vsec_add_aux(struct pci_dev *pdev, struct device *parent, + struct intel_vsec_device *intel_vsec_dev, + const char *name); + +static inline struct intel_vsec_device *dev_to_ivdev(struct device *dev) +{ + return container_of(dev, struct intel_vsec_device, auxdev.dev); +} + +static inline struct intel_vsec_device *auxdev_to_ivdev(struct auxiliary_device *auxdev) +{ + return container_of(auxdev, struct intel_vsec_device, auxdev); +} +#endif diff --git a/drivers/platform/x86/intel/wmi/Kconfig b/drivers/platform/x86/intel/wmi/Kconfig new file mode 100644 index 000000000..8e159f712 --- /dev/null +++ b/drivers/platform/x86/intel/wmi/Kconfig @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Intel x86 Platform Specific Drivers +# + +config INTEL_WMI + bool + +config INTEL_WMI_SBL_FW_UPDATE + tristate "Intel WMI Slim Bootloader firmware update signaling driver" + depends on ACPI_WMI + select INTEL_WMI + help + Say Y here if you want to be able to use the WMI interface to signal + Slim Bootloader to trigger update on next reboot. + + To compile this driver as a module, choose M here: the module will + be called intel-wmi-sbl-fw-update. + +config INTEL_WMI_THUNDERBOLT + tristate "Intel WMI thunderbolt force power driver" + depends on ACPI_WMI + select INTEL_WMI + help + Say Y here if you want to be able to use the WMI interface on select + systems to force the power control of Intel Thunderbolt controllers. + This is useful for updating the firmware when devices are not plugged + into the controller. + + To compile this driver as a module, choose M here: the module will + be called intel-wmi-thunderbolt. diff --git a/drivers/platform/x86/intel/wmi/Makefile b/drivers/platform/x86/intel/wmi/Makefile new file mode 100644 index 000000000..c2d56d25d --- /dev/null +++ b/drivers/platform/x86/intel/wmi/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Intel x86 Platform Specific Drivers +# + +intel-wmi-sbl-fw-update-y := sbl-fw-update.o +obj-$(CONFIG_INTEL_WMI_SBL_FW_UPDATE) += intel-wmi-sbl-fw-update.o +intel-wmi-thunderbolt-y := thunderbolt.o +obj-$(CONFIG_INTEL_WMI_THUNDERBOLT) += intel-wmi-thunderbolt.o diff --git a/drivers/platform/x86/intel/wmi/sbl-fw-update.c b/drivers/platform/x86/intel/wmi/sbl-fw-update.c new file mode 100644 index 000000000..3c86e0108 --- /dev/null +++ b/drivers/platform/x86/intel/wmi/sbl-fw-update.c @@ -0,0 +1,144 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Slim Bootloader(SBL) firmware update signaling driver + * + * Slim Bootloader is a small, open-source, non UEFI compliant, boot firmware + * optimized for running on certain Intel platforms. + * + * SBL exposes an ACPI-WMI device via /sys/bus/wmi/devices/<INTEL_WMI_SBL_GUID>. + * This driver further adds "firmware_update_request" device attribute. + * This attribute normally has a value of 0 and userspace can signal SBL + * to update firmware, on next reboot, by writing a value of 1. + * + * More details of SBL firmware update process is available at: + * https://slimbootloader.github.io/security/firmware-update.html + */ + +#include <linux/acpi.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/sysfs.h> +#include <linux/wmi.h> + +#define INTEL_WMI_SBL_GUID "44FADEB1-B204-40F2-8581-394BBDC1B651" + +static int get_fwu_request(struct device *dev, u32 *out) +{ + struct acpi_buffer result = {ACPI_ALLOCATE_BUFFER, NULL}; + union acpi_object *obj; + acpi_status status; + + status = wmi_query_block(INTEL_WMI_SBL_GUID, 0, &result); + if (ACPI_FAILURE(status)) { + dev_err(dev, "wmi_query_block failed\n"); + return -ENODEV; + } + + obj = (union acpi_object *)result.pointer; + if (!obj || obj->type != ACPI_TYPE_INTEGER) { + dev_warn(dev, "wmi_query_block returned invalid value\n"); + kfree(obj); + return -EINVAL; + } + + *out = obj->integer.value; + kfree(obj); + + return 0; +} + +static int set_fwu_request(struct device *dev, u32 in) +{ + struct acpi_buffer input; + acpi_status status; + u32 value; + + value = in; + input.length = sizeof(u32); + input.pointer = &value; + + status = wmi_set_block(INTEL_WMI_SBL_GUID, 0, &input); + if (ACPI_FAILURE(status)) { + dev_err(dev, "wmi_set_block failed\n"); + return -ENODEV; + } + + return 0; +} + +static ssize_t firmware_update_request_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + u32 val; + int ret; + + ret = get_fwu_request(dev, &val); + if (ret) + return ret; + + return sprintf(buf, "%d\n", val); +} + +static ssize_t firmware_update_request_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + unsigned int val; + int ret; + + ret = kstrtouint(buf, 0, &val); + if (ret) + return ret; + + /* May later be extended to support values other than 0 and 1 */ + if (val > 1) + return -ERANGE; + + ret = set_fwu_request(dev, val); + if (ret) + return ret; + + return count; +} +static DEVICE_ATTR_RW(firmware_update_request); + +static struct attribute *firmware_update_attrs[] = { + &dev_attr_firmware_update_request.attr, + NULL +}; +ATTRIBUTE_GROUPS(firmware_update); + +static int intel_wmi_sbl_fw_update_probe(struct wmi_device *wdev, + const void *context) +{ + dev_info(&wdev->dev, "Slim Bootloader signaling driver attached\n"); + return 0; +} + +static void intel_wmi_sbl_fw_update_remove(struct wmi_device *wdev) +{ + dev_info(&wdev->dev, "Slim Bootloader signaling driver removed\n"); +} + +static const struct wmi_device_id intel_wmi_sbl_id_table[] = { + { .guid_string = INTEL_WMI_SBL_GUID }, + {} +}; +MODULE_DEVICE_TABLE(wmi, intel_wmi_sbl_id_table); + +static struct wmi_driver intel_wmi_sbl_fw_update_driver = { + .driver = { + .name = "intel-wmi-sbl-fw-update", + .dev_groups = firmware_update_groups, + }, + .probe = intel_wmi_sbl_fw_update_probe, + .remove = intel_wmi_sbl_fw_update_remove, + .id_table = intel_wmi_sbl_id_table, +}; +module_wmi_driver(intel_wmi_sbl_fw_update_driver); + +MODULE_AUTHOR("Jithu Joseph <jithu.joseph@intel.com>"); +MODULE_DESCRIPTION("Slim Bootloader firmware update signaling driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/platform/x86/intel/wmi/thunderbolt.c b/drivers/platform/x86/intel/wmi/thunderbolt.c new file mode 100644 index 000000000..fc333ff82 --- /dev/null +++ b/drivers/platform/x86/intel/wmi/thunderbolt.c @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * WMI Thunderbolt driver + * + * Copyright (C) 2017 Dell Inc. All Rights Reserved. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/acpi.h> +#include <linux/device.h> +#include <linux/fs.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/sysfs.h> +#include <linux/types.h> +#include <linux/wmi.h> + +#define INTEL_WMI_THUNDERBOLT_GUID "86CCFD48-205E-4A77-9C48-2021CBEDE341" + +static ssize_t force_power_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct acpi_buffer input; + acpi_status status; + u8 mode; + + input.length = sizeof(u8); + input.pointer = &mode; + mode = hex_to_bin(buf[0]); + dev_dbg(dev, "force_power: storing %#x\n", mode); + if (mode == 0 || mode == 1) { + status = wmi_evaluate_method(INTEL_WMI_THUNDERBOLT_GUID, 0, 1, + &input, NULL); + if (ACPI_FAILURE(status)) { + dev_dbg(dev, "force_power: failed to evaluate ACPI method\n"); + return -ENODEV; + } + } else { + dev_dbg(dev, "force_power: unsupported mode\n"); + return -EINVAL; + } + return count; +} + +static DEVICE_ATTR_WO(force_power); + +static struct attribute *tbt_attrs[] = { + &dev_attr_force_power.attr, + NULL +}; +ATTRIBUTE_GROUPS(tbt); + +static const struct wmi_device_id intel_wmi_thunderbolt_id_table[] = { + { .guid_string = INTEL_WMI_THUNDERBOLT_GUID }, + { }, +}; + +static struct wmi_driver intel_wmi_thunderbolt_driver = { + .driver = { + .name = "intel-wmi-thunderbolt", + .dev_groups = tbt_groups, + }, + .id_table = intel_wmi_thunderbolt_id_table, +}; + +module_wmi_driver(intel_wmi_thunderbolt_driver); + +MODULE_DEVICE_TABLE(wmi, intel_wmi_thunderbolt_id_table); +MODULE_AUTHOR("Mario Limonciello <mario.limonciello@dell.com>"); +MODULE_DESCRIPTION("Intel WMI Thunderbolt force power driver"); +MODULE_LICENSE("GPL v2"); |