1 files changed, 422 insertions, 0 deletions

diff --git a/drivers/platform/x86/lenovo-yogabook-wmi.c b/drivers/platform/x86/lenovo-yogabook-wmi.c
new file mode 100644
index 000000000..d57fcc838
--- /dev/null
+++ b/drivers/platform/x86/lenovo-yogabook-wmi.c
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0
+/* WMI driver for Lenovo Yoga Book YB1-X90* / -X91* tablets */
+
+#include <linux/acpi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/machine.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/leds.h>
+#include <linux/wmi.h>
+#include <linux/workqueue.h>
+
+#define YB_MBTN_EVENT_GUID	"243FEC1D-1963-41C1-8100-06A9D82A94B4"
+#define YB_MBTN_METHOD_GUID	"742B0CA1-0B20-404B-9CAA-AEFCABF30CE0"
+
+#define YB_PAD_ENABLE	1
+#define YB_PAD_DISABLE	2
+#define YB_LIGHTUP_BTN	3
+
+#define YB_KBD_BL_DEFAULT 128
+
+/* flags */
+enum {
+	YB_KBD_IS_ON,
+	YB_DIGITIZER_IS_ON,
+	YB_DIGITIZER_MODE,
+	YB_TABLET_MODE,
+	YB_SUSPENDED,
+};
+
+struct yogabook_wmi {
+	struct wmi_device *wdev;
+	struct acpi_device *kbd_adev;
+	struct acpi_device *dig_adev;
+	struct device *kbd_dev;
+	struct device *dig_dev;
+	struct gpio_desc *backside_hall_gpio;
+	int backside_hall_irq;
+	struct work_struct work;
+	struct led_classdev kbd_bl_led;
+	unsigned long flags;
+	uint8_t brightness;
+};
+
+static int yogabook_wmi_do_action(struct wmi_device *wdev, int action)
+{
+	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+	struct acpi_buffer input;
+	acpi_status status;
+	u32 dummy_arg = 0;
+
+	dev_dbg(&wdev->dev, "Do action: %d\n", action);
+
+	input.pointer = &dummy_arg;
+	input.length = sizeof(dummy_arg);
+
+	status = wmi_evaluate_method(YB_MBTN_METHOD_GUID, 0, action, &input,
+				     &output);
+	if (ACPI_FAILURE(status)) {
+		dev_err(&wdev->dev, "Calling WMI method failure: 0x%x\n",
+			status);
+		return status;
+	}
+
+	kfree(output.pointer);
+
+	return 0;
+}
+
+/*
+ * To control keyboard backlight, call the method KBLC() of the TCS1 ACPI
+ * device (Goodix touchpad acts as virtual sensor keyboard).
+ */
+static int yogabook_wmi_set_kbd_backlight(struct wmi_device *wdev,
+					  uint8_t level)
+{
+	struct yogabook_wmi *data = dev_get_drvdata(&wdev->dev);
+	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+	struct acpi_object_list input;
+	union acpi_object param;
+	acpi_status status;
+
+	if (data->kbd_adev->power.state != ACPI_STATE_D0) {
+		dev_warn(&wdev->dev, "keyboard touchscreen not in D0, cannot set brightness\n");
+		return -ENXIO;
+	}
+
+	dev_dbg(&wdev->dev, "Set KBLC level to %u\n", level);
+
+	input.count = 1;
+	input.pointer = &param;
+
+	param.type = ACPI_TYPE_INTEGER;
+	param.integer.value = 255 - level;
+
+	status = acpi_evaluate_object(acpi_device_handle(data->kbd_adev), "KBLC",
+				      &input, &output);
+	if (ACPI_FAILURE(status)) {
+		dev_err(&wdev->dev, "Failed to call KBLC method: 0x%x\n", status);
+		return status;
+	}
+
+	kfree(output.pointer);
+	return 0;
+}
+
+static void yogabook_wmi_work(struct work_struct *work)
+{
+	struct yogabook_wmi *data = container_of(work, struct yogabook_wmi, work);
+	struct device *dev = &data->wdev->dev;
+	bool kbd_on, digitizer_on;
+	int r;
+
+	if (test_bit(YB_SUSPENDED, &data->flags))
+		return;
+
+	if (test_bit(YB_TABLET_MODE, &data->flags)) {
+		kbd_on = false;
+		digitizer_on = false;
+	} else if (test_bit(YB_DIGITIZER_MODE, &data->flags)) {
+		digitizer_on = true;
+		kbd_on = false;
+	} else {
+		kbd_on = true;
+		digitizer_on = false;
+	}
+
+	if (!kbd_on && test_bit(YB_KBD_IS_ON, &data->flags)) {
+		/*
+		 * Must be done before releasing the keyboard touchscreen driver,
+		 * so that the keyboard touchscreen dev is still in D0.
+		 */
+		yogabook_wmi_set_kbd_backlight(data->wdev, 0);
+		device_release_driver(data->kbd_dev);
+		clear_bit(YB_KBD_IS_ON, &data->flags);
+	}
+
+	if (!digitizer_on && test_bit(YB_DIGITIZER_IS_ON, &data->flags)) {
+		yogabook_wmi_do_action(data->wdev, YB_PAD_DISABLE);
+		device_release_driver(data->dig_dev);
+		clear_bit(YB_DIGITIZER_IS_ON, &data->flags);
+	}
+
+	if (kbd_on && !test_bit(YB_KBD_IS_ON, &data->flags)) {
+		r = device_reprobe(data->kbd_dev);
+		if (r)
+			dev_warn(dev, "Reprobe of keyboard touchscreen failed: %d\n", r);
+
+		yogabook_wmi_set_kbd_backlight(data->wdev, data->brightness);
+		set_bit(YB_KBD_IS_ON, &data->flags);
+	}
+
+	if (digitizer_on && !test_bit(YB_DIGITIZER_IS_ON, &data->flags)) {
+		r = device_reprobe(data->dig_dev);
+		if (r)
+			dev_warn(dev, "Reprobe of digitizer failed: %d\n", r);
+
+		yogabook_wmi_do_action(data->wdev, YB_PAD_ENABLE);
+		set_bit(YB_DIGITIZER_IS_ON, &data->flags);
+	}
+}
+
+static void yogabook_wmi_notify(struct wmi_device *wdev, union acpi_object *dummy)
+{
+	struct yogabook_wmi *data = dev_get_drvdata(&wdev->dev);
+
+	if (test_bit(YB_SUSPENDED, &data->flags))
+		return;
+
+	if (test_bit(YB_DIGITIZER_MODE, &data->flags))
+		clear_bit(YB_DIGITIZER_MODE, &data->flags);
+	else
+		set_bit(YB_DIGITIZER_MODE, &data->flags);
+
+	/*
+	 * We are called from the ACPI core and the driver [un]binding which is
+	 * done also needs ACPI functions, use a workqueue to avoid deadlocking.
+	 */
+	schedule_work(&data->work);
+}
+
+static irqreturn_t yogabook_backside_hall_irq(int irq, void *_data)
+{
+	struct yogabook_wmi *data = _data;
+
+	if (gpiod_get_value(data->backside_hall_gpio))
+		set_bit(YB_TABLET_MODE, &data->flags);
+	else
+		clear_bit(YB_TABLET_MODE, &data->flags);
+
+	schedule_work(&data->work);
+
+	return IRQ_HANDLED;
+}
+
+static enum led_brightness kbd_brightness_get(struct led_classdev *cdev)
+{
+	struct yogabook_wmi *data =
+		container_of(cdev, struct yogabook_wmi, kbd_bl_led);
+
+	return data->brightness;
+}
+
+static int kbd_brightness_set(struct led_classdev *cdev,
+			      enum led_brightness value)
+{
+	struct yogabook_wmi *data =
+		container_of(cdev, struct yogabook_wmi, kbd_bl_led);
+	struct wmi_device *wdev = data->wdev;
+
+	if ((value < 0) || (value > 255))
+		return -EINVAL;
+
+	data->brightness = value;
+
+	if (data->kbd_adev->power.state != ACPI_STATE_D0)
+		return 0;
+
+	return yogabook_wmi_set_kbd_backlight(wdev, data->brightness);
+}
+
+static struct gpiod_lookup_table yogabook_wmi_gpios = {
+	.dev_id		= "243FEC1D-1963-41C1-8100-06A9D82A94B4",
+	.table		= {
+		GPIO_LOOKUP("INT33FF:02", 18, "backside_hall_sw", GPIO_ACTIVE_LOW),
+		{}
+	},
+};
+
+static void yogabook_wmi_rm_gpio_lookup(void *unused)
+{
+	gpiod_remove_lookup_table(&yogabook_wmi_gpios);
+}
+
+static int yogabook_wmi_probe(struct wmi_device *wdev, const void *context)
+{
+	struct yogabook_wmi *data;
+	int r;
+
+	data = devm_kzalloc(&wdev->dev, sizeof(struct yogabook_wmi), GFP_KERNEL);
+	if (data == NULL)
+		return -ENOMEM;
+
+	dev_set_drvdata(&wdev->dev, data);
+
+	data->wdev = wdev;
+	data->brightness = YB_KBD_BL_DEFAULT;
+	set_bit(YB_KBD_IS_ON, &data->flags);
+	set_bit(YB_DIGITIZER_IS_ON, &data->flags);
+	INIT_WORK(&data->work, yogabook_wmi_work);
+
+	data->kbd_adev = acpi_dev_get_first_match_dev("GDIX1001", NULL, -1);
+	if (!data->kbd_adev) {
+		dev_err(&wdev->dev, "Cannot find the touchpad device in ACPI tables\n");
+		return -ENODEV;
+	}
+
+	data->dig_adev = acpi_dev_get_first_match_dev("WCOM0019", NULL, -1);
+	if (!data->dig_adev) {
+		dev_err(&wdev->dev, "Cannot find the digitizer device in ACPI tables\n");
+		r = -ENODEV;
+		goto error_put_devs;
+	}
+
+	data->kbd_dev = get_device(acpi_get_first_physical_node(data->kbd_adev));
+	if (!data->kbd_dev || !data->kbd_dev->driver) {
+		r = -EPROBE_DEFER;
+		goto error_put_devs;
+	}
+
+	data->dig_dev = get_device(acpi_get_first_physical_node(data->dig_adev));
+	if (!data->dig_dev || !data->dig_dev->driver) {
+		r = -EPROBE_DEFER;
+		goto error_put_devs;
+	}
+
+	gpiod_add_lookup_table(&yogabook_wmi_gpios);
+
+	r = devm_add_action_or_reset(&wdev->dev, yogabook_wmi_rm_gpio_lookup, NULL);
+	if (r)
+		goto error_put_devs;
+
+	data->backside_hall_gpio =
+		devm_gpiod_get(&wdev->dev, "backside_hall_sw", GPIOD_IN);
+	if (IS_ERR(data->backside_hall_gpio)) {
+		r = PTR_ERR(data->backside_hall_gpio);
+		dev_err_probe(&wdev->dev, r, "Getting backside_hall_sw GPIO\n");
+		goto error_put_devs;
+	}
+
+	r = gpiod_to_irq(data->backside_hall_gpio);
+	if (r < 0) {
+		dev_err_probe(&wdev->dev, r, "Getting backside_hall_sw IRQ\n");
+		goto error_put_devs;
+	}
+	data->backside_hall_irq = r;
+
+	/* Set default brightness before enabling the IRQ */
+	yogabook_wmi_set_kbd_backlight(data->wdev, YB_KBD_BL_DEFAULT);
+
+	r = request_irq(data->backside_hall_irq, yogabook_backside_hall_irq,
+			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+			"backside_hall_sw", data);
+	if (r) {
+		dev_err_probe(&wdev->dev, r, "Requesting backside_hall_sw IRQ\n");
+		goto error_put_devs;
+	}
+
+	schedule_work(&data->work);
+
+	data->kbd_bl_led.name = "ybwmi::kbd_backlight";
+	data->kbd_bl_led.brightness_set_blocking = kbd_brightness_set;
+	data->kbd_bl_led.brightness_get = kbd_brightness_get;
+	data->kbd_bl_led.max_brightness = 255;
+
+	r = devm_led_classdev_register(&wdev->dev, &data->kbd_bl_led);
+	if (r < 0) {
+		dev_err_probe(&wdev->dev, r, "Registering backlight LED device\n");
+		goto error_free_irq;
+	}
+
+	return 0;
+
+error_free_irq:
+	free_irq(data->backside_hall_irq, data);
+	cancel_work_sync(&data->work);
+error_put_devs:
+	put_device(data->dig_dev);
+	put_device(data->kbd_dev);
+	acpi_dev_put(data->dig_adev);
+	acpi_dev_put(data->kbd_adev);
+	return r;
+}
+
+static void yogabook_wmi_remove(struct wmi_device *wdev)
+{
+	struct yogabook_wmi *data = dev_get_drvdata(&wdev->dev);
+	int r = 0;
+
+	free_irq(data->backside_hall_irq, data);
+	cancel_work_sync(&data->work);
+
+	if (!test_bit(YB_KBD_IS_ON, &data->flags))
+		r |= device_reprobe(data->kbd_dev);
+
+	if (!test_bit(YB_DIGITIZER_IS_ON, &data->flags))
+		r |= device_reprobe(data->dig_dev);
+
+	if (r)
+		dev_warn(&wdev->dev, "Reprobe of devices failed\n");
+
+	put_device(data->dig_dev);
+	put_device(data->kbd_dev);
+	acpi_dev_put(data->dig_adev);
+	acpi_dev_put(data->kbd_adev);
+}
+
+static int __maybe_unused yogabook_wmi_suspend(struct device *dev)
+{
+	struct wmi_device *wdev = container_of(dev, struct wmi_device, dev);
+	struct yogabook_wmi *data = dev_get_drvdata(dev);
+
+	set_bit(YB_SUSPENDED, &data->flags);
+
+	flush_work(&data->work);
+
+	/* Turn off the pen button at sleep */
+	if (test_bit(YB_DIGITIZER_IS_ON, &data->flags))
+		yogabook_wmi_do_action(wdev, YB_PAD_DISABLE);
+
+	return 0;
+}
+
+static int __maybe_unused yogabook_wmi_resume(struct device *dev)
+{
+	struct wmi_device *wdev = container_of(dev, struct wmi_device, dev);
+	struct yogabook_wmi *data = dev_get_drvdata(dev);
+
+	if (test_bit(YB_KBD_IS_ON, &data->flags)) {
+		/* Ensure keyboard touchpad is on before we call KBLC() */
+		acpi_device_set_power(data->kbd_adev, ACPI_STATE_D0);
+		yogabook_wmi_set_kbd_backlight(wdev, data->brightness);
+	}
+
+	if (test_bit(YB_DIGITIZER_IS_ON, &data->flags))
+		yogabook_wmi_do_action(wdev, YB_PAD_ENABLE);
+
+	clear_bit(YB_SUSPENDED, &data->flags);
+
+	/* Check for YB_TABLET_MODE changes made during suspend */
+	schedule_work(&data->work);
+
+	return 0;
+}
+
+static const struct wmi_device_id yogabook_wmi_id_table[] = {
+	{
+		.guid_string = YB_MBTN_EVENT_GUID,
+	},
+	{ } /* Terminating entry */
+};
+
+static SIMPLE_DEV_PM_OPS(yogabook_wmi_pm_ops,
+			 yogabook_wmi_suspend, yogabook_wmi_resume);
+
+static struct wmi_driver yogabook_wmi_driver = {
+	.driver = {
+		.name = "yogabook-wmi",
+		.pm = &yogabook_wmi_pm_ops,
+	},
+	.no_notify_data = true,
+	.id_table = yogabook_wmi_id_table,
+	.probe = yogabook_wmi_probe,
+	.remove = yogabook_wmi_remove,
+	.notify = yogabook_wmi_notify,
+};
+module_wmi_driver(yogabook_wmi_driver);
+
+MODULE_DEVICE_TABLE(wmi, yogabook_wmi_id_table);
+MODULE_AUTHOR("Yauhen Kharuzhy");
+MODULE_DESCRIPTION("Lenovo Yoga Book WMI driver");
+MODULE_LICENSE("GPL v2");