summaryrefslogtreecommitdiffstats
path: root/drivers/power/reset/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/power/reset/Kconfig')
-rw-r--r--drivers/power/reset/Kconfig306
1 files changed, 306 insertions, 0 deletions
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
new file mode 100644
index 000000000..54201f037
--- /dev/null
+++ b/drivers/power/reset/Kconfig
@@ -0,0 +1,306 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig POWER_RESET
+ bool "Board level reset or power off"
+ help
+ Provides a number of drivers which either reset a complete board
+ or shut it down, by manipulating the main power supply on the board.
+
+ Say Y here to enable board reset and power off
+
+if POWER_RESET
+
+config POWER_RESET_AS3722
+ bool "ams AS3722 power-off driver"
+ depends on MFD_AS3722
+ help
+ This driver supports turning off board via a ams AS3722 power-off.
+
+config POWER_RESET_AT91_POWEROFF
+ tristate "Atmel AT91 poweroff driver"
+ depends on ARCH_AT91
+ default SOC_AT91SAM9 || SOC_SAMA5
+ help
+ This driver supports poweroff for Atmel AT91SAM9 and SAMA5
+ SoCs
+
+config POWER_RESET_AT91_RESET
+ tristate "Atmel AT91 reset driver"
+ depends on ARCH_AT91
+ default SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5
+ help
+ This driver supports restart for Atmel AT91SAM9 and SAMA5
+ SoCs
+
+config POWER_RESET_AT91_SAMA5D2_SHDWC
+ tristate "Atmel AT91 SAMA5D2-Compatible shutdown controller driver"
+ depends on ARCH_AT91
+ default SOC_SAM9X60 || SOC_SAMA5
+ help
+ This driver supports the alternate shutdown controller for some Atmel
+ SAMA5 SoCs. It is present for example on SAMA5D2 SoC.
+
+config POWER_RESET_ATC260X
+ tristate "Actions Semi ATC260x PMIC power-off driver"
+ depends on MFD_ATC260X
+ help
+ This driver provides power-off and restart support for a system
+ through Actions Semi ATC260x series PMICs.
+
+config POWER_RESET_AXXIA
+ bool "LSI Axxia reset driver"
+ depends on ARCH_AXXIA
+ help
+ This driver supports restart for Axxia SoC.
+
+ Say Y if you have an Axxia family SoC.
+
+config POWER_RESET_BRCMKONA
+ bool "Broadcom Kona reset driver"
+ depends on ARM || COMPILE_TEST
+ default ARCH_BCM_MOBILE
+ help
+ This driver provides restart support for Broadcom Kona chips.
+
+ Say Y here if you have a Broadcom Kona-based board and you wish
+ to have restart support.
+
+config POWER_RESET_BRCMSTB
+ bool "Broadcom STB reset driver"
+ depends on ARM || ARM64 || MIPS || COMPILE_TEST
+ depends on MFD_SYSCON
+ default ARCH_BRCMSTB || BMIPS_GENERIC
+ help
+ This driver provides restart support for Broadcom STB boards.
+
+ Say Y here if you have a Broadcom STB board and you wish
+ to have restart support.
+
+config POWER_RESET_GEMINI_POWEROFF
+ bool "Cortina Gemini power-off driver"
+ depends on ARCH_GEMINI || COMPILE_TEST
+ depends on OF && HAS_IOMEM
+ default ARCH_GEMINI
+ help
+ This driver supports turning off the Cortina Gemini SoC.
+ Select this if you're building a kernel with Gemini SoC support.
+
+config POWER_RESET_GPIO
+ bool "GPIO power-off driver"
+ depends on OF_GPIO
+ help
+ This driver supports turning off your board via a GPIO line.
+ If your board needs a GPIO high/low to power down, say Y and
+ create a binding in your devicetree.
+
+config POWER_RESET_GPIO_RESTART
+ bool "GPIO restart driver"
+ depends on OF_GPIO
+ help
+ This driver supports restarting your board via a GPIO line.
+ If your board needs a GPIO high/low to restart, say Y and
+ create a binding in your devicetree.
+
+config POWER_RESET_HISI
+ bool "Hisilicon power-off driver"
+ depends on ARCH_HISI
+ help
+ Reboot support for Hisilicon boards.
+
+config POWER_RESET_LINKSTATION
+ tristate "Buffalo LinkStation power-off driver"
+ depends on ARCH_MVEBU || COMPILE_TEST
+ depends on OF_MDIO && PHYLIB
+ help
+ This driver supports turning off some Buffalo LinkStations by
+ setting an output pin at the ethernet PHY to the correct state.
+ It also makes the device compatible with the WoL function.
+
+ Say Y here if you have a Buffalo LinkStation LS421D/E.
+
+config POWER_RESET_MSM
+ bool "Qualcomm MSM power-off driver"
+ depends on ARCH_QCOM
+ help
+ Power off and restart support for Qualcomm boards.
+
+config POWER_RESET_QCOM_PON
+ tristate "Qualcomm power-on driver"
+ depends on ARCH_QCOM
+ depends on MFD_SPMI_PMIC
+ select REBOOT_MODE
+ help
+ Power On support for Qualcomm boards.
+ If you have a Qualcomm platform and need support for
+ power-on and reboot reason, Say Y.
+ If unsure, Say N.
+
+config POWER_RESET_OCELOT_RESET
+ bool "Microsemi Ocelot reset driver"
+ depends on MSCC_OCELOT || ARCH_SPARX5 || COMPILE_TEST
+ select MFD_SYSCON
+ help
+ This driver supports restart for Microsemi Ocelot SoC and similar.
+
+config POWER_RESET_OXNAS
+ bool "OXNAS SoC restart driver"
+ depends on ARCH_OXNAS
+ default MACH_OX820
+ help
+ Restart support for OXNAS/PLXTECH OX820 SoC.
+
+config POWER_RESET_PIIX4_POWEROFF
+ tristate "Intel PIIX4 power-off driver"
+ depends on PCI
+ depends on MIPS || COMPILE_TEST
+ help
+ This driver supports powering off a system using the Intel PIIX4
+ southbridge, for example the MIPS Malta development board. The
+ southbridge SOff state is entered in response to a request to
+ power off the system.
+
+config POWER_RESET_LTC2952
+ bool "LTC2952 PowerPath power-off driver"
+ depends on OF_GPIO
+ help
+ This driver supports an external powerdown trigger and board power
+ down via the LTC2952. Bindings are made in the device tree.
+
+config POWER_RESET_MT6323
+ bool "MediaTek MT6323 power-off driver"
+ depends on MFD_MT6397
+ help
+ The power-off driver is responsible for externally shutdown down
+ the power of a remote MediaTek SoC MT6323 is connected to through
+ controlling a tiny circuit BBPU inside MT6323 RTC.
+
+ Say Y if you have a board where MT6323 could be found.
+
+config POWER_RESET_QNAP
+ bool "QNAP power-off driver"
+ depends on OF_GPIO && PLAT_ORION
+ help
+ This driver supports turning off QNAP NAS devices by sending
+ commands to the microcontroller which controls the main power.
+
+ Say Y if you have a QNAP NAS.
+
+config POWER_RESET_REGULATOR
+ bool "Regulator subsystem power-off driver"
+ depends on OF && REGULATOR
+ help
+ This driver supports turning off your board by disabling a
+ power regulator defined in the devicetree.
+
+config POWER_RESET_RESTART
+ bool "Restart power-off driver"
+ help
+ Some boards don't actually have the ability to power off.
+ Instead they restart, and u-boot holds the SoC until the
+ user presses a key. u-boot then boots into Linux.
+
+config POWER_RESET_ST
+ bool "ST restart driver"
+ depends on ARCH_STI
+ help
+ Reset support for STMicroelectronics boards.
+
+config POWER_RESET_TPS65086
+ bool "TPS65086 restart driver"
+ depends on MFD_TPS65086
+ help
+ This driver adds support for resetting the TPS65086 PMIC on restart.
+
+config POWER_RESET_VERSATILE
+ bool "ARM Versatile family reboot driver"
+ depends on ARM
+ depends on MFD_SYSCON
+ depends on OF
+ help
+ Power off and restart support for ARM Versatile family of
+ reference boards.
+
+config POWER_RESET_VEXPRESS
+ bool "ARM Versatile Express power-off and reset driver"
+ depends on ARM || ARM64
+ depends on VEXPRESS_CONFIG=y
+ help
+ Power off and reset support for the ARM Ltd. Versatile
+ Express boards.
+
+config POWER_RESET_XGENE
+ bool "APM SoC X-Gene reset driver"
+ depends on ARM64
+ help
+ Reboot support for the APM SoC X-Gene Eval boards.
+
+config POWER_RESET_KEYSTONE
+ bool "Keystone reset driver"
+ depends on ARCH_KEYSTONE || COMPILE_TEST
+ depends on HAS_IOMEM
+ select MFD_SYSCON
+ help
+ Reboot support for the KEYSTONE SoCs.
+
+config POWER_RESET_SYSCON
+ bool "Generic SYSCON regmap reset driver"
+ depends on OF
+ depends on HAS_IOMEM
+ select MFD_SYSCON
+ help
+ Reboot support for generic SYSCON mapped register reset.
+
+config POWER_RESET_SYSCON_POWEROFF
+ bool "Generic SYSCON regmap poweroff driver"
+ depends on OF
+ depends on HAS_IOMEM
+ select MFD_SYSCON
+ help
+ Poweroff support for generic SYSCON mapped register poweroff.
+
+config POWER_RESET_RMOBILE
+ tristate "Renesas R-Mobile reset driver"
+ depends on ARCH_RMOBILE || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Reboot support for Renesas R-Mobile and SH-Mobile SoCs.
+
+config REBOOT_MODE
+ tristate
+
+config SYSCON_REBOOT_MODE
+ tristate "Generic SYSCON regmap reboot mode driver"
+ depends on OF
+ depends on MFD_SYSCON
+ select REBOOT_MODE
+ help
+ Say y here will enable reboot mode driver. This will
+ get reboot mode arguments and store it in SYSCON mapped
+ register, then the bootloader can read it to take different
+ action according to the mode.
+
+config POWER_RESET_SC27XX
+ tristate "Spreadtrum SC27xx PMIC power-off driver"
+ depends on MFD_SC27XX_PMIC || COMPILE_TEST
+ help
+ This driver supports powering off a system through
+ Spreadtrum SC27xx series PMICs. The SC27xx series
+ PMICs includes the SC2720, SC2721, SC2723, SC2730
+ and SC2731 chips.
+
+config NVMEM_REBOOT_MODE
+ tristate "Generic NVMEM reboot mode driver"
+ depends on OF
+ select REBOOT_MODE
+ help
+ Say y here will enable reboot mode driver. This will
+ get reboot mode arguments and store it in a NVMEM cell,
+ then the bootloader can read it and take different
+ action according to the mode.
+
+config POWER_MLXBF
+ tristate "Mellanox BlueField power handling driver"
+ depends on (GPIO_MLXBF2 || GPIO_MLXBF3) && ACPI
+ help
+ This driver supports reset or low power mode handling for Mellanox BlueField.
+
+endif