summaryrefslogtreecommitdiffstats
path: root/drivers/power/supply/88pm860x_battery.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/power/supply/88pm860x_battery.c')
-rw-r--r--drivers/power/supply/88pm860x_battery.c1016
1 files changed, 1016 insertions, 0 deletions
diff --git a/drivers/power/supply/88pm860x_battery.c b/drivers/power/supply/88pm860x_battery.c
new file mode 100644
index 000000000..f3f3f8cd1
--- /dev/null
+++ b/drivers/power/supply/88pm860x_battery.c
@@ -0,0 +1,1016 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery driver for Marvell 88PM860x PMIC
+ *
+ * Copyright (c) 2012 Marvell International Ltd.
+ * Author: Jett Zhou <jtzhou@marvell.com>
+ * Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/string.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/88pm860x.h>
+#include <linux/delay.h>
+
+/* bit definitions of Status Query Interface 2 */
+#define STATUS2_CHG (1 << 2)
+#define STATUS2_BAT (1 << 3)
+#define STATUS2_VBUS (1 << 4)
+
+/* bit definitions of Measurement Enable 1 Register */
+#define MEAS1_TINT (1 << 3)
+#define MEAS1_GP1 (1 << 5)
+
+/* bit definitions of Measurement Enable 3 Register */
+#define MEAS3_IBAT (1 << 0)
+#define MEAS3_BAT_DET (1 << 1)
+#define MEAS3_CC (1 << 2)
+
+/* bit definitions of Measurement Off Time Register */
+#define MEAS_OFF_SLEEP_EN (1 << 1)
+
+/* bit definitions of GPADC Bias Current 2 Register */
+#define GPBIAS2_GPADC1_SET (2 << 4)
+/* GPADC1 Bias Current value in uA unit */
+#define GPBIAS2_GPADC1_UA ((GPBIAS2_GPADC1_SET >> 4) * 5 + 1)
+
+/* bit definitions of GPADC Misc 1 Register */
+#define GPMISC1_GPADC_EN (1 << 0)
+
+/* bit definitions of Charger Control 6 Register */
+#define CC6_BAT_DET_GPADC1 1
+
+/* bit definitions of Coulomb Counter Reading Register */
+#define CCNT_AVG_SEL (4 << 3)
+
+/* bit definitions of RTC miscellaneous Register1 */
+#define RTC_SOC_5LSB (0x1F << 3)
+
+/* bit definitions of RTC Register1 */
+#define RTC_SOC_3MSB (0x7)
+
+/* bit definitions of Power up Log register */
+#define BAT_WU_LOG (1<<6)
+
+/* coulomb counter index */
+#define CCNT_POS1 0
+#define CCNT_POS2 1
+#define CCNT_NEG1 2
+#define CCNT_NEG2 3
+#define CCNT_SPOS 4
+#define CCNT_SNEG 5
+
+/* OCV -- Open Circuit Voltage */
+#define OCV_MODE_ACTIVE 0
+#define OCV_MODE_SLEEP 1
+
+/* Vbat range of CC for measuring Rbat */
+#define LOW_BAT_THRESHOLD 3600
+#define VBATT_RESISTOR_MIN 3800
+#define VBATT_RESISTOR_MAX 4100
+
+/* TBAT for batt, TINT for chip itself */
+#define PM860X_TEMP_TINT (0)
+#define PM860X_TEMP_TBAT (1)
+
+/*
+ * Battery temperature based on NTC resistor, defined
+ * corresponding resistor value -- Ohm / C degeree.
+ */
+#define TBAT_NEG_25D 127773 /* -25 */
+#define TBAT_NEG_10D 54564 /* -10 */
+#define TBAT_0D 32330 /* 0 */
+#define TBAT_10D 19785 /* 10 */
+#define TBAT_20D 12468 /* 20 */
+#define TBAT_30D 8072 /* 30 */
+#define TBAT_40D 5356 /* 40 */
+
+struct pm860x_battery_info {
+ struct pm860x_chip *chip;
+ struct i2c_client *i2c;
+ struct device *dev;
+
+ struct power_supply *battery;
+ struct mutex lock;
+ int status;
+ int irq_cc;
+ int irq_batt;
+ int max_capacity;
+ int resistor; /* Battery Internal Resistor */
+ int last_capacity;
+ int start_soc;
+ unsigned present:1;
+ unsigned temp_type:1; /* TINT or TBAT */
+};
+
+struct ccnt {
+ unsigned long long pos;
+ unsigned long long neg;
+ unsigned int spos;
+ unsigned int sneg;
+
+ int total_chg; /* mAh(3.6C) */
+ int total_dischg; /* mAh(3.6C) */
+};
+
+/*
+ * State of Charge.
+ * The first number is mAh(=3.6C), and the second number is percent point.
+ */
+static int array_soc[][2] = {
+ {4170, 100}, {4154, 99}, {4136, 98}, {4122, 97}, {4107, 96},
+ {4102, 95}, {4088, 94}, {4081, 93}, {4070, 92}, {4060, 91},
+ {4053, 90}, {4044, 89}, {4035, 88}, {4028, 87}, {4019, 86},
+ {4013, 85}, {4006, 84}, {3995, 83}, {3987, 82}, {3982, 81},
+ {3976, 80}, {3968, 79}, {3962, 78}, {3954, 77}, {3946, 76},
+ {3941, 75}, {3934, 74}, {3929, 73}, {3922, 72}, {3916, 71},
+ {3910, 70}, {3904, 69}, {3898, 68}, {3892, 67}, {3887, 66},
+ {3880, 65}, {3874, 64}, {3868, 63}, {3862, 62}, {3854, 61},
+ {3849, 60}, {3843, 59}, {3840, 58}, {3833, 57}, {3829, 56},
+ {3824, 55}, {3818, 54}, {3815, 53}, {3810, 52}, {3808, 51},
+ {3804, 50}, {3801, 49}, {3798, 48}, {3796, 47}, {3792, 46},
+ {3789, 45}, {3785, 44}, {3784, 43}, {3782, 42}, {3780, 41},
+ {3777, 40}, {3776, 39}, {3774, 38}, {3772, 37}, {3771, 36},
+ {3769, 35}, {3768, 34}, {3764, 33}, {3763, 32}, {3760, 31},
+ {3760, 30}, {3754, 29}, {3750, 28}, {3749, 27}, {3744, 26},
+ {3740, 25}, {3734, 24}, {3732, 23}, {3728, 22}, {3726, 21},
+ {3720, 20}, {3716, 19}, {3709, 18}, {3703, 17}, {3698, 16},
+ {3692, 15}, {3683, 14}, {3675, 13}, {3670, 12}, {3665, 11},
+ {3661, 10}, {3649, 9}, {3637, 8}, {3622, 7}, {3609, 6},
+ {3580, 5}, {3558, 4}, {3540, 3}, {3510, 2}, {3429, 1},
+};
+
+static struct ccnt ccnt_data;
+
+/*
+ * register 1 bit[7:0] -- bit[11:4] of measured value of voltage
+ * register 0 bit[3:0] -- bit[3:0] of measured value of voltage
+ */
+static int measure_12bit_voltage(struct pm860x_battery_info *info,
+ int offset, int *data)
+{
+ unsigned char buf[2];
+ int ret;
+
+ ret = pm860x_bulk_read(info->i2c, offset, 2, buf);
+ if (ret < 0)
+ return ret;
+
+ *data = ((buf[0] & 0xff) << 4) | (buf[1] & 0x0f);
+ /* V_MEAS(mV) = data * 1.8 * 1000 / (2^12) */
+ *data = ((*data & 0xfff) * 9 * 25) >> 9;
+ return 0;
+}
+
+static int measure_vbatt(struct pm860x_battery_info *info, int state,
+ int *data)
+{
+ unsigned char buf[5];
+ int ret;
+
+ switch (state) {
+ case OCV_MODE_ACTIVE:
+ ret = measure_12bit_voltage(info, PM8607_VBAT_MEAS1, data);
+ if (ret)
+ return ret;
+ /* V_BATT_MEAS(mV) = value * 3 * 1.8 * 1000 / (2^12) */
+ *data *= 3;
+ break;
+ case OCV_MODE_SLEEP:
+ /*
+ * voltage value of VBATT in sleep mode is saved in different
+ * registers.
+ * bit[11:10] -- bit[7:6] of LDO9(0x18)
+ * bit[9:8] -- bit[7:6] of LDO8(0x17)
+ * bit[7:6] -- bit[7:6] of LDO7(0x16)
+ * bit[5:4] -- bit[7:6] of LDO6(0x15)
+ * bit[3:0] -- bit[7:4] of LDO5(0x14)
+ */
+ ret = pm860x_bulk_read(info->i2c, PM8607_LDO5, 5, buf);
+ if (ret < 0)
+ return ret;
+ ret = ((buf[4] >> 6) << 10) | ((buf[3] >> 6) << 8)
+ | ((buf[2] >> 6) << 6) | ((buf[1] >> 6) << 4)
+ | (buf[0] >> 4);
+ /* V_BATT_MEAS(mV) = data * 3 * 1.8 * 1000 / (2^12) */
+ *data = ((*data & 0xff) * 27 * 25) >> 9;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/*
+ * Return value is signed data.
+ * Negative value means discharging, and positive value means charging.
+ */
+static int measure_current(struct pm860x_battery_info *info, int *data)
+{
+ unsigned char buf[2];
+ short s;
+ int ret;
+
+ ret = pm860x_bulk_read(info->i2c, PM8607_IBAT_MEAS1, 2, buf);
+ if (ret < 0)
+ return ret;
+
+ s = ((buf[0] & 0xff) << 8) | (buf[1] & 0xff);
+ /* current(mA) = value * 0.125 */
+ *data = s >> 3;
+ return 0;
+}
+
+static int set_charger_current(struct pm860x_battery_info *info, int data,
+ int *old)
+{
+ int ret;
+
+ if (data < 50 || data > 1600 || !old)
+ return -EINVAL;
+
+ data = ((data - 50) / 50) & 0x1f;
+ *old = pm860x_reg_read(info->i2c, PM8607_CHG_CTRL2);
+ *old = (*old & 0x1f) * 50 + 50;
+ ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL2, 0x1f, data);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+static int read_ccnt(struct pm860x_battery_info *info, int offset,
+ int *ccnt)
+{
+ unsigned char buf[2];
+ int ret;
+
+ ret = pm860x_set_bits(info->i2c, PM8607_CCNT, 7, offset & 7);
+ if (ret < 0)
+ goto out;
+ ret = pm860x_bulk_read(info->i2c, PM8607_CCNT_MEAS1, 2, buf);
+ if (ret < 0)
+ goto out;
+ *ccnt = ((buf[0] & 0xff) << 8) | (buf[1] & 0xff);
+ return 0;
+out:
+ return ret;
+}
+
+static int calc_ccnt(struct pm860x_battery_info *info, struct ccnt *ccnt)
+{
+ unsigned int sum;
+ int ret;
+ int data;
+
+ ret = read_ccnt(info, CCNT_POS1, &data);
+ if (ret)
+ goto out;
+ sum = data & 0xffff;
+ ret = read_ccnt(info, CCNT_POS2, &data);
+ if (ret)
+ goto out;
+ sum |= (data & 0xffff) << 16;
+ ccnt->pos += sum;
+
+ ret = read_ccnt(info, CCNT_NEG1, &data);
+ if (ret)
+ goto out;
+ sum = data & 0xffff;
+ ret = read_ccnt(info, CCNT_NEG2, &data);
+ if (ret)
+ goto out;
+ sum |= (data & 0xffff) << 16;
+ sum = ~sum + 1; /* since it's negative */
+ ccnt->neg += sum;
+
+ ret = read_ccnt(info, CCNT_SPOS, &data);
+ if (ret)
+ goto out;
+ ccnt->spos += data;
+ ret = read_ccnt(info, CCNT_SNEG, &data);
+ if (ret)
+ goto out;
+
+ /*
+ * charge(mAh) = count * 1.6984 * 1e(-8)
+ * = count * 16984 * 1.024 * 1.024 * 1.024 / (2 ^ 40)
+ * = count * 18236 / (2 ^ 40)
+ */
+ ccnt->total_chg = (int) ((ccnt->pos * 18236) >> 40);
+ ccnt->total_dischg = (int) ((ccnt->neg * 18236) >> 40);
+ return 0;
+out:
+ return ret;
+}
+
+static int clear_ccnt(struct pm860x_battery_info *info, struct ccnt *ccnt)
+{
+ int data;
+
+ memset(ccnt, 0, sizeof(*ccnt));
+ /* read to clear ccnt */
+ read_ccnt(info, CCNT_POS1, &data);
+ read_ccnt(info, CCNT_POS2, &data);
+ read_ccnt(info, CCNT_NEG1, &data);
+ read_ccnt(info, CCNT_NEG2, &data);
+ read_ccnt(info, CCNT_SPOS, &data);
+ read_ccnt(info, CCNT_SNEG, &data);
+ return 0;
+}
+
+/* Calculate Open Circuit Voltage */
+static int calc_ocv(struct pm860x_battery_info *info, int *ocv)
+{
+ int ret;
+ int i;
+ int data;
+ int vbatt_avg;
+ int vbatt_sum;
+ int ibatt_avg;
+ int ibatt_sum;
+
+ if (!ocv)
+ return -EINVAL;
+
+ for (i = 0, ibatt_sum = 0, vbatt_sum = 0; i < 10; i++) {
+ ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+ if (ret)
+ goto out;
+ vbatt_sum += data;
+ ret = measure_current(info, &data);
+ if (ret)
+ goto out;
+ ibatt_sum += data;
+ }
+ vbatt_avg = vbatt_sum / 10;
+ ibatt_avg = ibatt_sum / 10;
+
+ mutex_lock(&info->lock);
+ if (info->present)
+ *ocv = vbatt_avg - ibatt_avg * info->resistor / 1000;
+ else
+ *ocv = vbatt_avg;
+ mutex_unlock(&info->lock);
+ dev_dbg(info->dev, "VBAT average:%d, OCV:%d\n", vbatt_avg, *ocv);
+ return 0;
+out:
+ return ret;
+}
+
+/* Calculate State of Charge (percent points) */
+static int calc_soc(struct pm860x_battery_info *info, int state, int *soc)
+{
+ int i;
+ int ocv;
+ int count;
+ int ret = -EINVAL;
+
+ if (!soc)
+ return -EINVAL;
+
+ switch (state) {
+ case OCV_MODE_ACTIVE:
+ ret = calc_ocv(info, &ocv);
+ break;
+ case OCV_MODE_SLEEP:
+ ret = measure_vbatt(info, OCV_MODE_SLEEP, &ocv);
+ break;
+ }
+ if (ret)
+ return ret;
+
+ count = ARRAY_SIZE(array_soc);
+ if (ocv < array_soc[count - 1][0]) {
+ *soc = 0;
+ return 0;
+ }
+
+ for (i = 0; i < count; i++) {
+ if (ocv >= array_soc[i][0]) {
+ *soc = array_soc[i][1];
+ break;
+ }
+ }
+ return 0;
+}
+
+static irqreturn_t pm860x_coulomb_handler(int irq, void *data)
+{
+ struct pm860x_battery_info *info = data;
+
+ calc_ccnt(info, &ccnt_data);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t pm860x_batt_handler(int irq, void *data)
+{
+ struct pm860x_battery_info *info = data;
+ int ret;
+
+ mutex_lock(&info->lock);
+ ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
+ if (ret & STATUS2_BAT) {
+ info->present = 1;
+ info->temp_type = PM860X_TEMP_TBAT;
+ } else {
+ info->present = 0;
+ info->temp_type = PM860X_TEMP_TINT;
+ }
+ mutex_unlock(&info->lock);
+ /* clear ccnt since battery is attached or dettached */
+ clear_ccnt(info, &ccnt_data);
+ return IRQ_HANDLED;
+}
+
+static void pm860x_init_battery(struct pm860x_battery_info *info)
+{
+ unsigned char buf[2];
+ int ret;
+ int data;
+ int bat_remove;
+ int soc = 0;
+
+ /* measure enable on GPADC1 */
+ data = MEAS1_GP1;
+ if (info->temp_type == PM860X_TEMP_TINT)
+ data |= MEAS1_TINT;
+ ret = pm860x_set_bits(info->i2c, PM8607_MEAS_EN1, data, data);
+ if (ret)
+ goto out;
+
+ /* measure enable on IBAT, BAT_DET, CC. IBAT is depend on CC. */
+ data = MEAS3_IBAT | MEAS3_BAT_DET | MEAS3_CC;
+ ret = pm860x_set_bits(info->i2c, PM8607_MEAS_EN3, data, data);
+ if (ret)
+ goto out;
+
+ /* measure disable CC in sleep time */
+ ret = pm860x_reg_write(info->i2c, PM8607_MEAS_OFF_TIME1, 0x82);
+ if (ret)
+ goto out;
+ ret = pm860x_reg_write(info->i2c, PM8607_MEAS_OFF_TIME2, 0x6c);
+ if (ret)
+ goto out;
+
+ /* enable GPADC */
+ ret = pm860x_set_bits(info->i2c, PM8607_GPADC_MISC1,
+ GPMISC1_GPADC_EN, GPMISC1_GPADC_EN);
+ if (ret < 0)
+ goto out;
+
+ /* detect battery via GPADC1 */
+ ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL6,
+ CC6_BAT_DET_GPADC1, CC6_BAT_DET_GPADC1);
+ if (ret < 0)
+ goto out;
+
+ ret = pm860x_set_bits(info->i2c, PM8607_CCNT, 7 << 3,
+ CCNT_AVG_SEL);
+ if (ret < 0)
+ goto out;
+
+ /* set GPADC1 bias */
+ ret = pm860x_set_bits(info->i2c, PM8607_GP_BIAS2, 0xF << 4,
+ GPBIAS2_GPADC1_SET);
+ if (ret < 0)
+ goto out;
+
+ /* check whether battery present) */
+ mutex_lock(&info->lock);
+ ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
+ if (ret < 0) {
+ mutex_unlock(&info->lock);
+ goto out;
+ }
+ if (ret & STATUS2_BAT) {
+ info->present = 1;
+ info->temp_type = PM860X_TEMP_TBAT;
+ } else {
+ info->present = 0;
+ info->temp_type = PM860X_TEMP_TINT;
+ }
+ mutex_unlock(&info->lock);
+
+ ret = calc_soc(info, OCV_MODE_ACTIVE, &soc);
+ if (ret < 0)
+ goto out;
+
+ data = pm860x_reg_read(info->i2c, PM8607_POWER_UP_LOG);
+ bat_remove = data & BAT_WU_LOG;
+
+ dev_dbg(info->dev, "battery wake up? %s\n",
+ bat_remove != 0 ? "yes" : "no");
+
+ /* restore SOC from RTC domain register */
+ if (bat_remove == 0) {
+ buf[0] = pm860x_reg_read(info->i2c, PM8607_RTC_MISC2);
+ buf[1] = pm860x_reg_read(info->i2c, PM8607_RTC1);
+ data = ((buf[1] & 0x3) << 5) | ((buf[0] >> 3) & 0x1F);
+ if (data > soc + 15)
+ info->start_soc = soc;
+ else if (data < soc - 15)
+ info->start_soc = soc;
+ else
+ info->start_soc = data;
+ dev_dbg(info->dev, "soc_rtc %d, soc_ocv :%d\n", data, soc);
+ } else {
+ pm860x_set_bits(info->i2c, PM8607_POWER_UP_LOG,
+ BAT_WU_LOG, BAT_WU_LOG);
+ info->start_soc = soc;
+ }
+ info->last_capacity = info->start_soc;
+ dev_dbg(info->dev, "init soc : %d\n", info->last_capacity);
+out:
+ return;
+}
+
+static void set_temp_threshold(struct pm860x_battery_info *info,
+ int min, int max)
+{
+ int data;
+
+ /* (tmp << 8) / 1800 */
+ if (min <= 0)
+ data = 0;
+ else
+ data = (min << 8) / 1800;
+ pm860x_reg_write(info->i2c, PM8607_GPADC1_HIGHTH, data);
+ dev_dbg(info->dev, "TEMP_HIGHTH : min: %d, 0x%x\n", min, data);
+
+ if (max <= 0)
+ data = 0xff;
+ else
+ data = (max << 8) / 1800;
+ pm860x_reg_write(info->i2c, PM8607_GPADC1_LOWTH, data);
+ dev_dbg(info->dev, "TEMP_LOWTH:max : %d, 0x%x\n", max, data);
+}
+
+static int measure_temp(struct pm860x_battery_info *info, int *data)
+{
+ int ret;
+ int temp;
+ int min;
+ int max;
+
+ if (info->temp_type == PM860X_TEMP_TINT) {
+ ret = measure_12bit_voltage(info, PM8607_TINT_MEAS1, data);
+ if (ret)
+ return ret;
+ *data = (*data - 884) * 1000 / 3611;
+ } else {
+ ret = measure_12bit_voltage(info, PM8607_GPADC1_MEAS1, data);
+ if (ret)
+ return ret;
+ /* meausered Vtbat(mV) / Ibias_current(11uA)*/
+ *data = (*data * 1000) / GPBIAS2_GPADC1_UA;
+
+ if (*data > TBAT_NEG_25D) {
+ temp = -30; /* over cold , suppose -30 roughly */
+ max = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+ set_temp_threshold(info, 0, max);
+ } else if (*data > TBAT_NEG_10D) {
+ temp = -15; /* -15 degree, code */
+ max = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+ set_temp_threshold(info, 0, max);
+ } else if (*data > TBAT_0D) {
+ temp = -5; /* -5 degree */
+ min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+ max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+ set_temp_threshold(info, min, max);
+ } else if (*data > TBAT_10D) {
+ temp = 5; /* in range of (0, 10) */
+ min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+ max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+ set_temp_threshold(info, min, max);
+ } else if (*data > TBAT_20D) {
+ temp = 15; /* in range of (10, 20) */
+ min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+ max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+ set_temp_threshold(info, min, max);
+ } else if (*data > TBAT_30D) {
+ temp = 25; /* in range of (20, 30) */
+ min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+ max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+ set_temp_threshold(info, min, max);
+ } else if (*data > TBAT_40D) {
+ temp = 35; /* in range of (30, 40) */
+ min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+ max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+ set_temp_threshold(info, min, max);
+ } else {
+ min = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+ set_temp_threshold(info, min, 0);
+ temp = 45; /* over heat ,suppose 45 roughly */
+ }
+
+ dev_dbg(info->dev, "temp_C:%d C,temp_mv:%d mv\n", temp, *data);
+ *data = temp;
+ }
+ return 0;
+}
+
+static int calc_resistor(struct pm860x_battery_info *info)
+{
+ int vbatt_sum1;
+ int vbatt_sum2;
+ int chg_current;
+ int ibatt_sum1;
+ int ibatt_sum2;
+ int data;
+ int ret;
+ int i;
+
+ ret = measure_current(info, &data);
+ /* make sure that charging is launched by data > 0 */
+ if (ret || data < 0)
+ goto out;
+
+ ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+ if (ret)
+ goto out;
+ /* calculate resistor only in CC charge mode */
+ if (data < VBATT_RESISTOR_MIN || data > VBATT_RESISTOR_MAX)
+ goto out;
+
+ /* current is saved */
+ if (set_charger_current(info, 500, &chg_current))
+ goto out;
+
+ /*
+ * set charge current as 500mA, wait about 500ms till charging
+ * process is launched and stable with the newer charging current.
+ */
+ msleep(500);
+
+ for (i = 0, vbatt_sum1 = 0, ibatt_sum1 = 0; i < 10; i++) {
+ ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+ if (ret)
+ goto out_meas;
+ vbatt_sum1 += data;
+ ret = measure_current(info, &data);
+ if (ret)
+ goto out_meas;
+
+ if (data < 0)
+ ibatt_sum1 = ibatt_sum1 - data; /* discharging */
+ else
+ ibatt_sum1 = ibatt_sum1 + data; /* charging */
+ }
+
+ if (set_charger_current(info, 100, &ret))
+ goto out_meas;
+ /*
+ * set charge current as 100mA, wait about 500ms till charging
+ * process is launched and stable with the newer charging current.
+ */
+ msleep(500);
+
+ for (i = 0, vbatt_sum2 = 0, ibatt_sum2 = 0; i < 10; i++) {
+ ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+ if (ret)
+ goto out_meas;
+ vbatt_sum2 += data;
+ ret = measure_current(info, &data);
+ if (ret)
+ goto out_meas;
+
+ if (data < 0)
+ ibatt_sum2 = ibatt_sum2 - data; /* discharging */
+ else
+ ibatt_sum2 = ibatt_sum2 + data; /* charging */
+ }
+
+ /* restore current setting */
+ if (set_charger_current(info, chg_current, &ret))
+ goto out_meas;
+
+ if ((vbatt_sum1 > vbatt_sum2) && (ibatt_sum1 > ibatt_sum2) &&
+ (ibatt_sum2 > 0)) {
+ /* calculate resistor in discharging case */
+ data = 1000 * (vbatt_sum1 - vbatt_sum2)
+ / (ibatt_sum1 - ibatt_sum2);
+ if ((data - info->resistor > 0) &&
+ (data - info->resistor < info->resistor))
+ info->resistor = data;
+ if ((info->resistor - data > 0) &&
+ (info->resistor - data < data))
+ info->resistor = data;
+ }
+ return 0;
+
+out_meas:
+ set_charger_current(info, chg_current, &ret);
+out:
+ return -EINVAL;
+}
+
+static int calc_capacity(struct pm860x_battery_info *info, int *cap)
+{
+ int ret;
+ int data;
+ int ibat;
+ int cap_ocv = 0;
+ int cap_cc = 0;
+
+ ret = calc_ccnt(info, &ccnt_data);
+ if (ret)
+ goto out;
+soc:
+ data = info->max_capacity * info->start_soc / 100;
+ if (ccnt_data.total_dischg - ccnt_data.total_chg <= data) {
+ cap_cc =
+ data + ccnt_data.total_chg - ccnt_data.total_dischg;
+ } else {
+ clear_ccnt(info, &ccnt_data);
+ calc_soc(info, OCV_MODE_ACTIVE, &info->start_soc);
+ dev_dbg(info->dev, "restart soc = %d !\n",
+ info->start_soc);
+ goto soc;
+ }
+
+ cap_cc = cap_cc * 100 / info->max_capacity;
+ if (cap_cc < 0)
+ cap_cc = 0;
+ else if (cap_cc > 100)
+ cap_cc = 100;
+
+ dev_dbg(info->dev, "%s, last cap : %d", __func__,
+ info->last_capacity);
+
+ ret = measure_current(info, &ibat);
+ if (ret)
+ goto out;
+ /* Calculate the capacity when discharging(ibat < 0) */
+ if (ibat < 0) {
+ ret = calc_soc(info, OCV_MODE_ACTIVE, &cap_ocv);
+ if (ret)
+ cap_ocv = info->last_capacity;
+ ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+ if (ret)
+ goto out;
+ if (data <= LOW_BAT_THRESHOLD) {
+ /* choose the lower capacity value to report
+ * between vbat and CC when vbat < 3.6v;
+ * than 3.6v;
+ */
+ *cap = min(cap_ocv, cap_cc);
+ } else {
+ /* when detect vbat > 3.6v, but cap_cc < 15,and
+ * cap_ocv is 10% larger than cap_cc, we can think
+ * CC have some accumulation error, switch to OCV
+ * to estimate capacity;
+ * */
+ if (cap_cc < 15 && cap_ocv - cap_cc > 10)
+ *cap = cap_ocv;
+ else
+ *cap = cap_cc;
+ }
+ /* when discharging, make sure current capacity
+ * is lower than last*/
+ if (*cap > info->last_capacity)
+ *cap = info->last_capacity;
+ } else {
+ *cap = cap_cc;
+ }
+ info->last_capacity = *cap;
+
+ dev_dbg(info->dev, "%s, cap_ocv:%d cap_cc:%d, cap:%d\n",
+ (ibat < 0) ? "discharging" : "charging",
+ cap_ocv, cap_cc, *cap);
+ /*
+ * store the current capacity to RTC domain register,
+ * after next power up , it will be restored.
+ */
+ pm860x_set_bits(info->i2c, PM8607_RTC_MISC2, RTC_SOC_5LSB,
+ (*cap & 0x1F) << 3);
+ pm860x_set_bits(info->i2c, PM8607_RTC1, RTC_SOC_3MSB,
+ ((*cap >> 5) & 0x3));
+ return 0;
+out:
+ return ret;
+}
+
+static void pm860x_external_power_changed(struct power_supply *psy)
+{
+ struct pm860x_battery_info *info = dev_get_drvdata(psy->dev.parent);
+
+ calc_resistor(info);
+}
+
+static int pm860x_batt_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct pm860x_battery_info *info = dev_get_drvdata(psy->dev.parent);
+ int data;
+ int ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = info->present;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ ret = calc_capacity(info, &data);
+ if (ret)
+ return ret;
+ if (data < 0)
+ data = 0;
+ else if (data > 100)
+ data = 100;
+ /* return 100 if battery is not attached */
+ if (!info->present)
+ data = 100;
+ val->intval = data;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ /* return real vbatt Voltage */
+ ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+ if (ret)
+ return ret;
+ val->intval = data * 1000;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+ /* return Open Circuit Voltage (not measured voltage) */
+ ret = calc_ocv(info, &data);
+ if (ret)
+ return ret;
+ val->intval = data * 1000;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = measure_current(info, &data);
+ if (ret)
+ return ret;
+ val->intval = data;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ if (info->present) {
+ ret = measure_temp(info, &data);
+ if (ret)
+ return ret;
+ data *= 10;
+ } else {
+ /* Fake Temp 25C Without Battery */
+ data = 250;
+ }
+ val->intval = data;
+ break;
+ default:
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static int pm860x_batt_set_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct pm860x_battery_info *info = dev_get_drvdata(psy->dev.parent);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ clear_ccnt(info, &ccnt_data);
+ info->start_soc = 100;
+ dev_dbg(info->dev, "chg done, update soc = %d\n",
+ info->start_soc);
+ break;
+ default:
+ return -EPERM;
+ }
+
+ return 0;
+}
+
+
+static enum power_supply_property pm860x_batt_props[] = {
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_AVG,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_TEMP,
+};
+
+static const struct power_supply_desc pm860x_battery_desc = {
+ .name = "battery-monitor",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = pm860x_batt_props,
+ .num_properties = ARRAY_SIZE(pm860x_batt_props),
+ .get_property = pm860x_batt_get_prop,
+ .set_property = pm860x_batt_set_prop,
+ .external_power_changed = pm860x_external_power_changed,
+};
+
+static int pm860x_battery_probe(struct platform_device *pdev)
+{
+ struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+ struct pm860x_battery_info *info;
+ struct pm860x_power_pdata *pdata;
+ int ret;
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->irq_cc = platform_get_irq(pdev, 0);
+ if (info->irq_cc <= 0)
+ return -EINVAL;
+
+ info->irq_batt = platform_get_irq(pdev, 1);
+ if (info->irq_batt <= 0)
+ return -EINVAL;
+
+ info->chip = chip;
+ info->i2c =
+ (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
+ info->dev = &pdev->dev;
+ info->status = POWER_SUPPLY_STATUS_UNKNOWN;
+ pdata = pdev->dev.platform_data;
+
+ mutex_init(&info->lock);
+ platform_set_drvdata(pdev, info);
+
+ pm860x_init_battery(info);
+
+ if (pdata && pdata->max_capacity)
+ info->max_capacity = pdata->max_capacity;
+ else
+ info->max_capacity = 1500; /* set default capacity */
+ if (pdata && pdata->resistor)
+ info->resistor = pdata->resistor;
+ else
+ info->resistor = 300; /* set default internal resistor */
+
+ info->battery = devm_power_supply_register(&pdev->dev,
+ &pm860x_battery_desc,
+ NULL);
+ if (IS_ERR(info->battery))
+ return PTR_ERR(info->battery);
+ info->battery->dev.parent = &pdev->dev;
+
+ ret = devm_request_threaded_irq(chip->dev, info->irq_cc, NULL,
+ pm860x_coulomb_handler, IRQF_ONESHOT,
+ "coulomb", info);
+ if (ret < 0) {
+ dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
+ info->irq_cc, ret);
+ return ret;
+ }
+
+ ret = devm_request_threaded_irq(chip->dev, info->irq_batt, NULL,
+ pm860x_batt_handler,
+ IRQF_ONESHOT, "battery", info);
+ if (ret < 0) {
+ dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
+ info->irq_batt, ret);
+ return ret;
+ }
+
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pm860x_battery_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+
+ if (device_may_wakeup(dev))
+ chip->wakeup_flag |= 1 << PM8607_IRQ_CC;
+ return 0;
+}
+
+static int pm860x_battery_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+
+ if (device_may_wakeup(dev))
+ chip->wakeup_flag &= ~(1 << PM8607_IRQ_CC);
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pm860x_battery_pm_ops,
+ pm860x_battery_suspend, pm860x_battery_resume);
+
+static struct platform_driver pm860x_battery_driver = {
+ .driver = {
+ .name = "88pm860x-battery",
+ .pm = &pm860x_battery_pm_ops,
+ },
+ .probe = pm860x_battery_probe,
+};
+module_platform_driver(pm860x_battery_driver);
+
+MODULE_DESCRIPTION("Marvell 88PM860x Battery driver");
+MODULE_LICENSE("GPL");