1 files changed, 236 insertions, 0 deletions
diff --git a/drivers/pwm/pwm-keembay.c b/drivers/pwm/pwm-keembay.c
new file mode 100644
index 000000000..ac02d8bb4
--- /dev/null
+++ b/drivers/pwm/pwm-keembay.c
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Keem Bay PWM driver
+ *
+ * Copyright (C) 2020 Intel Corporation
+ * Authors: Lai Poey Seng <poey.seng.lai@intel.com>
+ *          Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com>
+ *
+ * Limitations:
+ * - Upon disabling a channel, the currently running
+ *   period will not be completed. However, upon
+ *   reconfiguration of the duty cycle/period, the
+ *   currently running period will be completed first.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+
+#define KMB_TOTAL_PWM_CHANNELS		6
+#define KMB_PWM_COUNT_MAX		U16_MAX
+#define KMB_PWM_EN_BIT			BIT(31)
+
+/* Mask */
+#define KMB_PWM_HIGH_MASK		GENMASK(31, 16)
+#define KMB_PWM_LOW_MASK		GENMASK(15, 0)
+#define KMB_PWM_LEADIN_MASK		GENMASK(30, 0)
+
+/* PWM Register offset */
+#define KMB_PWM_LEADIN_OFFSET(ch)	(0x00 + 4 * (ch))
+#define KMB_PWM_HIGHLOW_OFFSET(ch)	(0x20 + 4 * (ch))
+
+struct keembay_pwm {
+	struct pwm_chip chip;
+	struct device *dev;
+	struct clk *clk;
+	void __iomem *base;
+};
+
+static inline struct keembay_pwm *to_keembay_pwm_dev(struct pwm_chip *chip)
+{
+	return container_of(chip, struct keembay_pwm, chip);
+}
+
+static void keembay_clk_unprepare(void *data)
+{
+	clk_disable_unprepare(data);
+}
+
+static int keembay_clk_enable(struct device *dev, struct clk *clk)
+{
+	int ret;
+
+	ret = clk_prepare_enable(clk);
+	if (ret)
+		return ret;
+
+	return devm_add_action_or_reset(dev, keembay_clk_unprepare, clk);
+}
+
+/*
+ * With gcc 10, CONFIG_CC_OPTIMIZE_FOR_SIZE and only "inline" instead of
+ * "__always_inline" this fails to compile because the compiler doesn't notice
+ * for all valid masks (e.g. KMB_PWM_LEADIN_MASK) that they are ok.
+ */
+static __always_inline void keembay_pwm_update_bits(struct keembay_pwm *priv, u32 mask,
+					   u32 val, u32 offset)
+{
+	u32 buff = readl(priv->base + offset);
+
+	buff = u32_replace_bits(buff, val, mask);
+	writel(buff, priv->base + offset);
+}
+
+static void keembay_pwm_enable(struct keembay_pwm *priv, int ch)
+{
+	keembay_pwm_update_bits(priv, KMB_PWM_EN_BIT, 1,
+				KMB_PWM_LEADIN_OFFSET(ch));
+}
+
+static void keembay_pwm_disable(struct keembay_pwm *priv, int ch)
+{
+	keembay_pwm_update_bits(priv, KMB_PWM_EN_BIT, 0,
+				KMB_PWM_LEADIN_OFFSET(ch));
+}
+
+static int keembay_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+				 struct pwm_state *state)
+{
+	struct keembay_pwm *priv = to_keembay_pwm_dev(chip);
+	unsigned long long high, low;
+	unsigned long clk_rate;
+	u32 highlow;
+
+	clk_rate = clk_get_rate(priv->clk);
+
+	/* Read channel enabled status */
+	highlow = readl(priv->base + KMB_PWM_LEADIN_OFFSET(pwm->hwpwm));
+	if (highlow & KMB_PWM_EN_BIT)
+		state->enabled = true;
+	else
+		state->enabled = false;
+
+	/* Read period and duty cycle */
+	highlow = readl(priv->base + KMB_PWM_HIGHLOW_OFFSET(pwm->hwpwm));
+	low = FIELD_GET(KMB_PWM_LOW_MASK, highlow) * NSEC_PER_SEC;
+	high = FIELD_GET(KMB_PWM_HIGH_MASK, highlow) * NSEC_PER_SEC;
+	state->duty_cycle = DIV_ROUND_UP_ULL(high, clk_rate);
+	state->period = DIV_ROUND_UP_ULL(high + low, clk_rate);
+	state->polarity = PWM_POLARITY_NORMAL;
+
+	return 0;
+}
+
+static int keembay_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			     const struct pwm_state *state)
+{
+	struct keembay_pwm *priv = to_keembay_pwm_dev(chip);
+	struct pwm_state current_state;
+	unsigned long long div;
+	unsigned long clk_rate;
+	u32 pwm_count = 0;
+	u16 high, low;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	/*
+	 * Configure the pwm repeat count as infinite at (15:0) and leadin
+	 * low time as 0 at (30:16), which is in terms of clock cycles.
+	 */
+	keembay_pwm_update_bits(priv, KMB_PWM_LEADIN_MASK, 0,
+				KMB_PWM_LEADIN_OFFSET(pwm->hwpwm));
+
+	keembay_pwm_get_state(chip, pwm, &current_state);
+
+	if (!state->enabled) {
+		if (current_state.enabled)
+			keembay_pwm_disable(priv, pwm->hwpwm);
+		return 0;
+	}
+
+	/*
+	 * The upper 16 bits and lower 16 bits of the KMB_PWM_HIGHLOW_OFFSET
+	 * register contain the high time and low time of waveform accordingly.
+	 * All the values are in terms of clock cycles.
+	 */
+
+	clk_rate = clk_get_rate(priv->clk);
+	div = clk_rate * state->duty_cycle;
+	div = DIV_ROUND_DOWN_ULL(div, NSEC_PER_SEC);
+	if (div > KMB_PWM_COUNT_MAX)
+		return -ERANGE;
+
+	high = div;
+	div = clk_rate * state->period;
+	div = DIV_ROUND_DOWN_ULL(div, NSEC_PER_SEC);
+	div = div - high;
+	if (div > KMB_PWM_COUNT_MAX)
+		return -ERANGE;
+
+	low = div;
+
+	pwm_count = FIELD_PREP(KMB_PWM_HIGH_MASK, high) |
+		    FIELD_PREP(KMB_PWM_LOW_MASK, low);
+
+	writel(pwm_count, priv->base + KMB_PWM_HIGHLOW_OFFSET(pwm->hwpwm));
+
+	if (state->enabled && !current_state.enabled)
+		keembay_pwm_enable(priv, pwm->hwpwm);
+
+	return 0;
+}
+
+static const struct pwm_ops keembay_pwm_ops = {
+	.owner = THIS_MODULE,
+	.apply = keembay_pwm_apply,
+	.get_state = keembay_pwm_get_state,
+};
+
+static int keembay_pwm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct keembay_pwm *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk))
+		return dev_err_probe(dev, PTR_ERR(priv->clk), "Failed to get clock\n");
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	ret = keembay_clk_enable(dev, priv->clk);
+	if (ret)
+		return ret;
+
+	priv->chip.dev = dev;
+	priv->chip.ops = &keembay_pwm_ops;
+	priv->chip.npwm = KMB_TOTAL_PWM_CHANNELS;
+
+	ret = devm_pwmchip_add(dev, &priv->chip);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to add PWM chip\n");
+
+	return 0;
+}
+
+static const struct of_device_id keembay_pwm_of_match[] = {
+	{ .compatible = "intel,keembay-pwm" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, keembay_pwm_of_match);
+
+static struct platform_driver keembay_pwm_driver = {
+	.probe	= keembay_pwm_probe,
+	.driver	= {
+		.name = "pwm-keembay",
+		.of_match_table = keembay_pwm_of_match,
+	},
+};
+module_platform_driver(keembay_pwm_driver);
+
+MODULE_ALIAS("platform:pwm-keembay");
+MODULE_DESCRIPTION("Intel Keem Bay PWM driver");
+MODULE_LICENSE("GPL v2");