summaryrefslogtreecommitdiffstats
path: root/drivers/regulator/bd71815-regulator.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/regulator/bd71815-regulator.c')
-rw-r--r--drivers/regulator/bd71815-regulator.c633
1 files changed, 633 insertions, 0 deletions
diff --git a/drivers/regulator/bd71815-regulator.c b/drivers/regulator/bd71815-regulator.c
new file mode 100644
index 000000000..c2b8b8be7
--- /dev/null
+++ b/drivers/regulator/bd71815-regulator.c
@@ -0,0 +1,633 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Copyright 2014 Embest Technology Co. Ltd. Inc.
+// bd71815-regulator.c ROHM BD71815 regulator driver
+//
+// Author: Tony Luo <luofc@embedinfo.com>
+//
+// Partially rewritten at 2021 by
+// Matti Vaittinen <matti.vaitinen@fi.rohmeurope.com>
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/driver.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/mfd/rohm-generic.h>
+#include <linux/mfd/rohm-bd71815.h>
+#include <linux/regulator/of_regulator.h>
+
+struct bd71815_regulator {
+ struct regulator_desc desc;
+ const struct rohm_dvs_config *dvs;
+};
+
+static const int bd7181x_wled_currents[] = {
+ 10, 20, 30, 50, 70, 100, 200, 300, 500, 700, 1000, 2000, 3000, 4000,
+ 5000, 6000, 7000, 8000, 9000, 10000, 11000, 12000, 13000, 14000, 15000,
+ 16000, 17000, 18000, 19000, 20000, 21000, 22000, 23000, 24000, 25000,
+};
+
+static const struct rohm_dvs_config buck1_dvs = {
+ .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS |
+ ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR,
+ .run_reg = BD71815_REG_BUCK1_VOLT_H,
+ .run_mask = BD71815_VOLT_MASK,
+ .run_on_mask = BD71815_BUCK_RUN_ON,
+ .snvs_on_mask = BD71815_BUCK_SNVS_ON,
+ .suspend_reg = BD71815_REG_BUCK1_VOLT_L,
+ .suspend_mask = BD71815_VOLT_MASK,
+ .suspend_on_mask = BD71815_BUCK_SUSP_ON,
+ .lpsr_reg = BD71815_REG_BUCK1_VOLT_L,
+ .lpsr_mask = BD71815_VOLT_MASK,
+ .lpsr_on_mask = BD71815_BUCK_LPSR_ON,
+};
+
+static const struct rohm_dvs_config buck2_dvs = {
+ .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS |
+ ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR,
+ .run_reg = BD71815_REG_BUCK2_VOLT_H,
+ .run_mask = BD71815_VOLT_MASK,
+ .run_on_mask = BD71815_BUCK_RUN_ON,
+ .snvs_on_mask = BD71815_BUCK_SNVS_ON,
+ .suspend_reg = BD71815_REG_BUCK2_VOLT_L,
+ .suspend_mask = BD71815_VOLT_MASK,
+ .suspend_on_mask = BD71815_BUCK_SUSP_ON,
+ .lpsr_reg = BD71815_REG_BUCK2_VOLT_L,
+ .lpsr_mask = BD71815_VOLT_MASK,
+ .lpsr_on_mask = BD71815_BUCK_LPSR_ON,
+};
+
+static const struct rohm_dvs_config buck3_dvs = {
+ .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS |
+ ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR,
+ .run_reg = BD71815_REG_BUCK3_VOLT,
+ .run_mask = BD71815_VOLT_MASK,
+ .run_on_mask = BD71815_BUCK_RUN_ON,
+ .snvs_on_mask = BD71815_BUCK_SNVS_ON,
+ .suspend_on_mask = BD71815_BUCK_SUSP_ON,
+ .lpsr_on_mask = BD71815_BUCK_LPSR_ON,
+};
+
+static const struct rohm_dvs_config buck4_dvs = {
+ .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS |
+ ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR,
+ .run_reg = BD71815_REG_BUCK4_VOLT,
+ .run_mask = BD71815_VOLT_MASK,
+ .run_on_mask = BD71815_BUCK_RUN_ON,
+ .snvs_on_mask = BD71815_BUCK_SNVS_ON,
+ .suspend_on_mask = BD71815_BUCK_SUSP_ON,
+ .lpsr_on_mask = BD71815_BUCK_LPSR_ON,
+};
+
+static const struct rohm_dvs_config ldo1_dvs = {
+ .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS |
+ ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR,
+ .run_reg = BD71815_REG_LDO_MODE1,
+ .run_mask = BD71815_VOLT_MASK,
+ .run_on_mask = LDO1_RUN_ON,
+ .snvs_on_mask = LDO1_SNVS_ON,
+ .suspend_on_mask = LDO1_SUSP_ON,
+ .lpsr_on_mask = LDO1_LPSR_ON,
+};
+
+static const struct rohm_dvs_config ldo2_dvs = {
+ .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS |
+ ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR,
+ .run_reg = BD71815_REG_LDO_MODE2,
+ .run_mask = BD71815_VOLT_MASK,
+ .run_on_mask = LDO2_RUN_ON,
+ .snvs_on_mask = LDO2_SNVS_ON,
+ .suspend_on_mask = LDO2_SUSP_ON,
+ .lpsr_on_mask = LDO2_LPSR_ON,
+};
+
+static const struct rohm_dvs_config ldo3_dvs = {
+ .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS |
+ ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR,
+ .run_reg = BD71815_REG_LDO_MODE2,
+ .run_mask = BD71815_VOLT_MASK,
+ .run_on_mask = LDO3_RUN_ON,
+ .snvs_on_mask = LDO3_SNVS_ON,
+ .suspend_on_mask = LDO3_SUSP_ON,
+ .lpsr_on_mask = LDO3_LPSR_ON,
+};
+
+static const struct rohm_dvs_config ldo4_dvs = {
+ .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS |
+ ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR,
+ .run_reg = BD71815_REG_LDO_MODE3,
+ .run_mask = BD71815_VOLT_MASK,
+ .run_on_mask = LDO4_RUN_ON,
+ .snvs_on_mask = LDO4_SNVS_ON,
+ .suspend_on_mask = LDO4_SUSP_ON,
+ .lpsr_on_mask = LDO4_LPSR_ON,
+};
+
+static const struct rohm_dvs_config ldo5_dvs = {
+ .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS |
+ ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR,
+ .run_reg = BD71815_REG_LDO_MODE3,
+ .run_mask = BD71815_VOLT_MASK,
+ .run_on_mask = LDO5_RUN_ON,
+ .snvs_on_mask = LDO5_SNVS_ON,
+ .suspend_on_mask = LDO5_SUSP_ON,
+ .lpsr_on_mask = LDO5_LPSR_ON,
+};
+
+static const struct rohm_dvs_config dvref_dvs = {
+ .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS |
+ ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR,
+ .run_on_mask = DVREF_RUN_ON,
+ .snvs_on_mask = DVREF_SNVS_ON,
+ .suspend_on_mask = DVREF_SUSP_ON,
+ .lpsr_on_mask = DVREF_LPSR_ON,
+};
+
+static const struct rohm_dvs_config ldolpsr_dvs = {
+ .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS |
+ ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR,
+ .run_on_mask = DVREF_RUN_ON,
+ .snvs_on_mask = DVREF_SNVS_ON,
+ .suspend_on_mask = DVREF_SUSP_ON,
+ .lpsr_on_mask = DVREF_LPSR_ON,
+};
+
+static const struct rohm_dvs_config buck5_dvs = {
+ .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS |
+ ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR,
+ .run_reg = BD71815_REG_BUCK5_VOLT,
+ .run_mask = BD71815_VOLT_MASK,
+ .run_on_mask = BD71815_BUCK_RUN_ON,
+ .snvs_on_mask = BD71815_BUCK_SNVS_ON,
+ .suspend_on_mask = BD71815_BUCK_SUSP_ON,
+ .lpsr_on_mask = BD71815_BUCK_LPSR_ON,
+};
+
+static int set_hw_dvs_levels(struct device_node *np,
+ const struct regulator_desc *desc,
+ struct regulator_config *cfg)
+{
+ struct bd71815_regulator *data;
+
+ data = container_of(desc, struct bd71815_regulator, desc);
+ return rohm_regulator_set_dvs_levels(data->dvs, np, desc, cfg->regmap);
+}
+
+/*
+ * Bucks 1 and 2 have two voltage selection registers where selected
+ * voltage can be set. Which of the registers is used can be either controlled
+ * by a control bit in register - or by HW state. If HW state specific voltages
+ * are given - then we assume HW state based control should be used.
+ *
+ * If volatge value is updated to currently selected register - then output
+ * voltage is immediately changed no matter what is set as ramp rate. Thus we
+ * default changing voltage by writing new value to inactive register and
+ * then updating the 'register selection' bit. This naturally only works when
+ * HW state machine is not used to select the voltage.
+ */
+static int buck12_set_hw_dvs_levels(struct device_node *np,
+ const struct regulator_desc *desc,
+ struct regulator_config *cfg)
+{
+ struct bd71815_regulator *data;
+ int ret = 0, val;
+
+ data = container_of(desc, struct bd71815_regulator, desc);
+
+ if (of_find_property(np, "rohm,dvs-run-voltage", NULL) ||
+ of_find_property(np, "rohm,dvs-suspend-voltage", NULL) ||
+ of_find_property(np, "rohm,dvs-lpsr-voltage", NULL) ||
+ of_find_property(np, "rohm,dvs-snvs-voltage", NULL)) {
+ ret = regmap_read(cfg->regmap, desc->vsel_reg, &val);
+ if (ret)
+ return ret;
+
+ if (!(BD71815_BUCK_STBY_DVS & val) &&
+ !(BD71815_BUCK_DVSSEL & val)) {
+ int val2;
+
+ /*
+ * We are currently using voltage from _L.
+ * We'd better copy it to _H and switch to it to
+ * avoid shutting us down if LPSR or SUSPEND is set to
+ * disabled. _L value is at reg _H + 1
+ */
+ ret = regmap_read(cfg->regmap, desc->vsel_reg + 1,
+ &val2);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(cfg->regmap, desc->vsel_reg,
+ BD71815_VOLT_MASK |
+ BD71815_BUCK_DVSSEL,
+ val2 | BD71815_BUCK_DVSSEL);
+ if (ret)
+ return ret;
+ }
+ ret = rohm_regulator_set_dvs_levels(data->dvs, np, desc,
+ cfg->regmap);
+ if (ret)
+ return ret;
+ /*
+ * DVS levels were given => use HW-state machine for voltage
+ * controls. NOTE: AFAIK, This means that if voltage is changed
+ * by SW the ramp-rate is not respected. Should we disable
+ * SW voltage control when the HW state machine is used?
+ */
+ ret = regmap_update_bits(cfg->regmap, desc->vsel_reg,
+ BD71815_BUCK_STBY_DVS,
+ BD71815_BUCK_STBY_DVS);
+ }
+
+ return ret;
+}
+
+/*
+ * BUCK1/2
+ * BUCK1RAMPRATE[1:0] BUCK1 DVS ramp rate setting
+ * 00: 10.00mV/usec 10mV 1uS
+ * 01: 5.00mV/usec 10mV 2uS
+ * 10: 2.50mV/usec 10mV 4uS
+ * 11: 1.25mV/usec 10mV 8uS
+ */
+static const unsigned int bd7181x_ramp_table[] = { 1250, 2500, 5000, 10000 };
+
+static int bd7181x_led_set_current_limit(struct regulator_dev *rdev,
+ int min_uA, int max_uA)
+{
+ int ret;
+ int onstatus;
+
+ onstatus = regulator_is_enabled_regmap(rdev);
+
+ ret = regulator_set_current_limit_regmap(rdev, min_uA, max_uA);
+ if (!ret) {
+ int newstatus;
+
+ newstatus = regulator_is_enabled_regmap(rdev);
+ if (onstatus != newstatus) {
+ /*
+ * HW FIX: spurious led status change detected. Toggle
+ * state as a workaround
+ */
+ if (onstatus)
+ ret = regulator_enable_regmap(rdev);
+ else
+ ret = regulator_disable_regmap(rdev);
+
+ if (ret)
+ dev_err(rdev_get_dev(rdev),
+ "failed to revert the LED state (%d)\n",
+ ret);
+ }
+ }
+
+ return ret;
+}
+
+static int bd7181x_buck12_get_voltage_sel(struct regulator_dev *rdev)
+{
+ int rid = rdev_get_id(rdev);
+ int ret, regh, regl, val;
+
+ regh = BD71815_REG_BUCK1_VOLT_H + rid * 0x2;
+ regl = BD71815_REG_BUCK1_VOLT_L + rid * 0x2;
+
+ ret = regmap_read(rdev->regmap, regh, &val);
+ if (ret)
+ return ret;
+
+ /*
+ * If we use HW state machine based voltage reg selection - then we
+ * return BD71815_REG_BUCK1_VOLT_H which is used at RUN.
+ * Else we do return the BD71815_REG_BUCK1_VOLT_H or
+ * BD71815_REG_BUCK1_VOLT_L depending on which is selected to be used
+ * by BD71815_BUCK_DVSSEL bit
+ */
+ if ((!(val & BD71815_BUCK_STBY_DVS)) && (!(val & BD71815_BUCK_DVSSEL)))
+ ret = regmap_read(rdev->regmap, regl, &val);
+
+ if (ret)
+ return ret;
+
+ return val & BD71815_VOLT_MASK;
+}
+
+/*
+ * For Buck 1/2.
+ */
+static int bd7181x_buck12_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned int sel)
+{
+ int rid = rdev_get_id(rdev);
+ int ret, val, reg, regh, regl;
+
+ regh = BD71815_REG_BUCK1_VOLT_H + rid*0x2;
+ regl = BD71815_REG_BUCK1_VOLT_L + rid*0x2;
+
+ ret = regmap_read(rdev->regmap, regh, &val);
+ if (ret)
+ return ret;
+
+ /*
+ * If bucks 1 & 2 are controlled by state machine - then the RUN state
+ * voltage is set to BD71815_REG_BUCK1_VOLT_H. Changing SUSPEND/LPSR
+ * voltages at runtime is not supported by this driver.
+ */
+ if (((val & BD71815_BUCK_STBY_DVS))) {
+ return regmap_update_bits(rdev->regmap, regh, BD71815_VOLT_MASK,
+ sel);
+ }
+ /* Update new voltage to the register which is not selected now */
+ if (val & BD71815_BUCK_DVSSEL)
+ reg = regl;
+ else
+ reg = regh;
+
+ ret = regmap_update_bits(rdev->regmap, reg, BD71815_VOLT_MASK, sel);
+ if (ret)
+ return ret;
+
+ /* Select the other DVS register to be used */
+ return regmap_update_bits(rdev->regmap, regh, BD71815_BUCK_DVSSEL,
+ ~val);
+}
+
+static const struct regulator_ops bd7181x_ldo_regulator_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+static const struct regulator_ops bd7181x_fixed_regulator_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+};
+
+static const struct regulator_ops bd7181x_buck_regulator_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+};
+
+static const struct regulator_ops bd7181x_buck12_regulator_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .set_voltage_sel = bd7181x_buck12_set_voltage_sel,
+ .get_voltage_sel = bd7181x_buck12_get_voltage_sel,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_ramp_delay = regulator_set_ramp_delay_regmap,
+};
+
+static const struct regulator_ops bd7181x_led_regulator_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_current_limit = bd7181x_led_set_current_limit,
+ .get_current_limit = regulator_get_current_limit_regmap,
+};
+
+#define BD71815_FIXED_REG(_name, _id, ereg, emsk, voltage, _dvs) \
+ [(_id)] = { \
+ .desc = { \
+ .name = #_name, \
+ .of_match = of_match_ptr(#_name), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .n_voltages = 1, \
+ .ops = &bd7181x_fixed_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = (_id), \
+ .owner = THIS_MODULE, \
+ .min_uV = (voltage), \
+ .enable_reg = (ereg), \
+ .enable_mask = (emsk), \
+ .of_parse_cb = set_hw_dvs_levels, \
+ }, \
+ .dvs = (_dvs), \
+ }
+
+#define BD71815_BUCK_REG(_name, _id, vsel, ereg, min, max, step, _dvs) \
+ [(_id)] = { \
+ .desc = { \
+ .name = #_name, \
+ .of_match = of_match_ptr(#_name), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .n_voltages = ((max) - (min)) / (step) + 1, \
+ .ops = &bd7181x_buck_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = (_id), \
+ .owner = THIS_MODULE, \
+ .min_uV = (min), \
+ .uV_step = (step), \
+ .vsel_reg = (vsel), \
+ .vsel_mask = BD71815_VOLT_MASK, \
+ .enable_reg = (ereg), \
+ .enable_mask = BD71815_BUCK_RUN_ON, \
+ .of_parse_cb = set_hw_dvs_levels, \
+ }, \
+ .dvs = (_dvs), \
+ }
+
+#define BD71815_BUCK12_REG(_name, _id, vsel, ereg, min, max, step, \
+ _dvs) \
+ [(_id)] = { \
+ .desc = { \
+ .name = #_name, \
+ .of_match = of_match_ptr(#_name), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .n_voltages = ((max) - (min)) / (step) + 1, \
+ .ops = &bd7181x_buck12_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = (_id), \
+ .owner = THIS_MODULE, \
+ .min_uV = (min), \
+ .uV_step = (step), \
+ .vsel_reg = (vsel), \
+ .vsel_mask = BD71815_VOLT_MASK, \
+ .enable_reg = (ereg), \
+ .enable_mask = BD71815_BUCK_RUN_ON, \
+ .ramp_reg = (ereg), \
+ .ramp_mask = BD71815_BUCK_RAMPRATE_MASK, \
+ .ramp_delay_table = bd7181x_ramp_table, \
+ .n_ramp_values = ARRAY_SIZE(bd7181x_ramp_table),\
+ .of_parse_cb = buck12_set_hw_dvs_levels, \
+ }, \
+ .dvs = (_dvs), \
+ }
+
+#define BD71815_LED_REG(_name, _id, csel, mask, ereg, emsk, currents) \
+ [(_id)] = { \
+ .desc = { \
+ .name = #_name, \
+ .of_match = of_match_ptr(#_name), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .n_current_limits = ARRAY_SIZE(currents), \
+ .ops = &bd7181x_led_regulator_ops, \
+ .type = REGULATOR_CURRENT, \
+ .id = (_id), \
+ .owner = THIS_MODULE, \
+ .curr_table = currents, \
+ .csel_reg = (csel), \
+ .csel_mask = (mask), \
+ .enable_reg = (ereg), \
+ .enable_mask = (emsk), \
+ }, \
+ }
+
+#define BD71815_LDO_REG(_name, _id, vsel, ereg, emsk, min, max, step, \
+ _dvs) \
+ [(_id)] = { \
+ .desc = { \
+ .name = #_name, \
+ .of_match = of_match_ptr(#_name), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .n_voltages = ((max) - (min)) / (step) + 1, \
+ .ops = &bd7181x_ldo_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = (_id), \
+ .owner = THIS_MODULE, \
+ .min_uV = (min), \
+ .uV_step = (step), \
+ .vsel_reg = (vsel), \
+ .vsel_mask = BD71815_VOLT_MASK, \
+ .enable_reg = (ereg), \
+ .enable_mask = (emsk), \
+ .of_parse_cb = set_hw_dvs_levels, \
+ }, \
+ .dvs = (_dvs), \
+ }
+
+static const struct bd71815_regulator bd71815_regulators[] = {
+ BD71815_BUCK12_REG(buck1, BD71815_BUCK1, BD71815_REG_BUCK1_VOLT_H,
+ BD71815_REG_BUCK1_MODE, 800000, 2000000, 25000,
+ &buck1_dvs),
+ BD71815_BUCK12_REG(buck2, BD71815_BUCK2, BD71815_REG_BUCK2_VOLT_H,
+ BD71815_REG_BUCK2_MODE, 800000, 2000000, 25000,
+ &buck2_dvs),
+ BD71815_BUCK_REG(buck3, BD71815_BUCK3, BD71815_REG_BUCK3_VOLT,
+ BD71815_REG_BUCK3_MODE, 1200000, 2700000, 50000,
+ &buck3_dvs),
+ BD71815_BUCK_REG(buck4, BD71815_BUCK4, BD71815_REG_BUCK4_VOLT,
+ BD71815_REG_BUCK4_MODE, 1100000, 1850000, 25000,
+ &buck4_dvs),
+ BD71815_BUCK_REG(buck5, BD71815_BUCK5, BD71815_REG_BUCK5_VOLT,
+ BD71815_REG_BUCK5_MODE, 1800000, 3300000, 50000,
+ &buck5_dvs),
+ BD71815_LDO_REG(ldo1, BD71815_LDO1, BD71815_REG_LDO1_VOLT,
+ BD71815_REG_LDO_MODE1, LDO1_RUN_ON, 800000, 3300000,
+ 50000, &ldo1_dvs),
+ BD71815_LDO_REG(ldo2, BD71815_LDO2, BD71815_REG_LDO2_VOLT,
+ BD71815_REG_LDO_MODE2, LDO2_RUN_ON, 800000, 3300000,
+ 50000, &ldo2_dvs),
+ /*
+ * Let's default LDO3 to be enabled by SW. We can override ops if DT
+ * says LDO3 should be enabled by HW when DCIN is connected.
+ */
+ BD71815_LDO_REG(ldo3, BD71815_LDO3, BD71815_REG_LDO3_VOLT,
+ BD71815_REG_LDO_MODE2, LDO3_RUN_ON, 800000, 3300000,
+ 50000, &ldo3_dvs),
+ BD71815_LDO_REG(ldo4, BD71815_LDO4, BD71815_REG_LDO4_VOLT,
+ BD71815_REG_LDO_MODE3, LDO4_RUN_ON, 800000, 3300000,
+ 50000, &ldo4_dvs),
+ BD71815_LDO_REG(ldo5, BD71815_LDO5, BD71815_REG_LDO5_VOLT_H,
+ BD71815_REG_LDO_MODE3, LDO5_RUN_ON, 800000, 3300000,
+ 50000, &ldo5_dvs),
+ BD71815_FIXED_REG(ldodvref, BD71815_LDODVREF, BD71815_REG_LDO_MODE4,
+ DVREF_RUN_ON, 3000000, &dvref_dvs),
+ BD71815_FIXED_REG(ldolpsr, BD71815_LDOLPSR, BD71815_REG_LDO_MODE4,
+ LDO_LPSR_RUN_ON, 1800000, &ldolpsr_dvs),
+ BD71815_LED_REG(wled, BD71815_WLED, BD71815_REG_LED_DIMM, LED_DIMM_MASK,
+ BD71815_REG_LED_CTRL, LED_RUN_ON,
+ bd7181x_wled_currents),
+};
+
+static int bd7181x_probe(struct platform_device *pdev)
+{
+ struct regulator_config config = {};
+ int i, ret;
+ struct gpio_desc *ldo4_en;
+ struct regmap *regmap;
+
+ regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!regmap) {
+ dev_err(&pdev->dev, "No parent regmap\n");
+ return -ENODEV;
+ }
+
+ ldo4_en = devm_fwnode_gpiod_get(&pdev->dev,
+ dev_fwnode(pdev->dev.parent),
+ "rohm,vsel", GPIOD_ASIS, "ldo4-en");
+ if (IS_ERR(ldo4_en)) {
+ ret = PTR_ERR(ldo4_en);
+ if (ret != -ENOENT)
+ return ret;
+ ldo4_en = NULL;
+ }
+
+ /* Disable to go to ship-mode */
+ ret = regmap_update_bits(regmap, BD71815_REG_PWRCTRL, RESTARTEN, 0);
+ if (ret)
+ return ret;
+
+ config.dev = pdev->dev.parent;
+ config.regmap = regmap;
+
+ for (i = 0; i < BD71815_REGULATOR_CNT; i++) {
+ const struct regulator_desc *desc;
+ struct regulator_dev *rdev;
+
+ desc = &bd71815_regulators[i].desc;
+
+ if (i == BD71815_LDO4)
+ config.ena_gpiod = ldo4_en;
+ else
+ config.ena_gpiod = NULL;
+
+ rdev = devm_regulator_register(&pdev->dev, desc, &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev,
+ "failed to register %s regulator\n",
+ desc->name);
+ return PTR_ERR(rdev);
+ }
+ }
+ return 0;
+}
+
+static const struct platform_device_id bd7181x_pmic_id[] = {
+ { "bd71815-pmic", ROHM_CHIP_TYPE_BD71815 },
+ { },
+};
+MODULE_DEVICE_TABLE(platform, bd7181x_pmic_id);
+
+static struct platform_driver bd7181x_regulator = {
+ .driver = {
+ .name = "bd7181x-pmic",
+ },
+ .probe = bd7181x_probe,
+ .id_table = bd7181x_pmic_id,
+};
+module_platform_driver(bd7181x_regulator);
+
+MODULE_AUTHOR("Tony Luo <luofc@embedinfo.com>");
+MODULE_DESCRIPTION("BD71815 voltage regulator driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:bd7181x-pmic");