diff options
Diffstat (limited to 'drivers/scsi/aacraid/rx.c')
| -rw-r--r-- | drivers/scsi/aacraid/rx.c | 683 |
1 files changed, 683 insertions, 0 deletions
diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c new file mode 100644 index 000000000..e06ff83b6 --- /dev/null +++ b/drivers/scsi/aacraid/rx.c @@ -0,0 +1,683 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Adaptec AAC series RAID controller driver + * (c) Copyright 2001 Red Hat Inc. + * + * based on the old aacraid driver that is.. + * Adaptec aacraid device driver for Linux. + * + * Copyright (c) 2000-2010 Adaptec, Inc. + * 2010-2015 PMC-Sierra, Inc. (aacraid@pmc-sierra.com) + * 2016-2017 Microsemi Corp. (aacraid@microsemi.com) + * + * Module Name: + * rx.c + * + * Abstract: Hardware miniport for Drawbridge specific hardware functions. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/spinlock.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/completion.h> +#include <linux/time.h> +#include <linux/interrupt.h> + +#include <scsi/scsi_host.h> + +#include "aacraid.h" + +static irqreturn_t aac_rx_intr_producer(int irq, void *dev_id) +{ + struct aac_dev *dev = dev_id; + unsigned long bellbits; + u8 intstat = rx_readb(dev, MUnit.OISR); + + /* + * Read mask and invert because drawbridge is reversed. + * This allows us to only service interrupts that have + * been enabled. + * Check to see if this is our interrupt. If it isn't just return + */ + if (likely(intstat & ~(dev->OIMR))) { + bellbits = rx_readl(dev, OutboundDoorbellReg); + if (unlikely(bellbits & DoorBellPrintfReady)) { + aac_printf(dev, readl (&dev->IndexRegs->Mailbox[5])); + rx_writel(dev, MUnit.ODR,DoorBellPrintfReady); + rx_writel(dev, InboundDoorbellReg,DoorBellPrintfDone); + } + else if (unlikely(bellbits & DoorBellAdapterNormCmdReady)) { + rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady); + aac_command_normal(&dev->queues->queue[HostNormCmdQueue]); + } + else if (likely(bellbits & DoorBellAdapterNormRespReady)) { + rx_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady); + aac_response_normal(&dev->queues->queue[HostNormRespQueue]); + } + else if (unlikely(bellbits & DoorBellAdapterNormCmdNotFull)) { + rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull); + } + else if (unlikely(bellbits & DoorBellAdapterNormRespNotFull)) { + rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull); + rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull); + } + return IRQ_HANDLED; + } + return IRQ_NONE; +} + +static irqreturn_t aac_rx_intr_message(int irq, void *dev_id) +{ + int isAif, isFastResponse, isSpecial; + struct aac_dev *dev = dev_id; + u32 Index = rx_readl(dev, MUnit.OutboundQueue); + if (unlikely(Index == 0xFFFFFFFFL)) + Index = rx_readl(dev, MUnit.OutboundQueue); + if (likely(Index != 0xFFFFFFFFL)) { + do { + isAif = isFastResponse = isSpecial = 0; + if (Index & 0x00000002L) { + isAif = 1; + if (Index == 0xFFFFFFFEL) + isSpecial = 1; + Index &= ~0x00000002L; + } else { + if (Index & 0x00000001L) + isFastResponse = 1; + Index >>= 2; + } + if (!isSpecial) { + if (unlikely(aac_intr_normal(dev, + Index, isAif, + isFastResponse, NULL))) { + rx_writel(dev, + MUnit.OutboundQueue, + Index); + rx_writel(dev, + MUnit.ODR, + DoorBellAdapterNormRespReady); + } + } + Index = rx_readl(dev, MUnit.OutboundQueue); + } while (Index != 0xFFFFFFFFL); + return IRQ_HANDLED; + } + return IRQ_NONE; +} + +/** + * aac_rx_disable_interrupt - Disable interrupts + * @dev: Adapter + */ + +static void aac_rx_disable_interrupt(struct aac_dev *dev) +{ + rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff); +} + +/** + * aac_rx_enable_interrupt_producer - Enable interrupts + * @dev: Adapter + */ + +static void aac_rx_enable_interrupt_producer(struct aac_dev *dev) +{ + rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb); +} + +/** + * aac_rx_enable_interrupt_message - Enable interrupts + * @dev: Adapter + */ + +static void aac_rx_enable_interrupt_message(struct aac_dev *dev) +{ + rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7); +} + +/** + * rx_sync_cmd - send a command and wait + * @dev: Adapter + * @command: Command to execute + * @p1: first parameter + * @p2: second parameter + * @p3: third parameter + * @p4: forth parameter + * @p5: fifth parameter + * @p6: sixth parameter + * @status: adapter status + * @r1: first return value + * @r2: second return value + * @r3: third return value + * @r4: forth return value + * + * This routine will send a synchronous command to the adapter and wait + * for its completion. + */ + +static int rx_sync_cmd(struct aac_dev *dev, u32 command, + u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, + u32 *status, u32 * r1, u32 * r2, u32 * r3, u32 * r4) +{ + unsigned long start; + int ok; + /* + * Write the command into Mailbox 0 + */ + writel(command, &dev->IndexRegs->Mailbox[0]); + /* + * Write the parameters into Mailboxes 1 - 6 + */ + writel(p1, &dev->IndexRegs->Mailbox[1]); + writel(p2, &dev->IndexRegs->Mailbox[2]); + writel(p3, &dev->IndexRegs->Mailbox[3]); + writel(p4, &dev->IndexRegs->Mailbox[4]); + /* + * Clear the synch command doorbell to start on a clean slate. + */ + rx_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0); + /* + * Disable doorbell interrupts + */ + rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff); + /* + * Force the completion of the mask register write before issuing + * the interrupt. + */ + rx_readb (dev, MUnit.OIMR); + /* + * Signal that there is a new synch command + */ + rx_writel(dev, InboundDoorbellReg, INBOUNDDOORBELL_0); + + ok = 0; + start = jiffies; + + /* + * Wait up to 30 seconds + */ + while (time_before(jiffies, start+30*HZ)) + { + udelay(5); /* Delay 5 microseconds to let Mon960 get info. */ + /* + * Mon960 will set doorbell0 bit when it has completed the command. + */ + if (rx_readl(dev, OutboundDoorbellReg) & OUTBOUNDDOORBELL_0) { + /* + * Clear the doorbell. + */ + rx_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0); + ok = 1; + break; + } + /* + * Yield the processor in case we are slow + */ + msleep(1); + } + if (unlikely(ok != 1)) { + /* + * Restore interrupt mask even though we timed out + */ + aac_adapter_enable_int(dev); + return -ETIMEDOUT; + } + /* + * Pull the synch status from Mailbox 0. + */ + if (status) + *status = readl(&dev->IndexRegs->Mailbox[0]); + if (r1) + *r1 = readl(&dev->IndexRegs->Mailbox[1]); + if (r2) + *r2 = readl(&dev->IndexRegs->Mailbox[2]); + if (r3) + *r3 = readl(&dev->IndexRegs->Mailbox[3]); + if (r4) + *r4 = readl(&dev->IndexRegs->Mailbox[4]); + /* + * Clear the synch command doorbell. + */ + rx_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0); + /* + * Restore interrupt mask + */ + aac_adapter_enable_int(dev); + return 0; + +} + +/** + * aac_rx_interrupt_adapter - interrupt adapter + * @dev: Adapter + * + * Send an interrupt to the i960 and breakpoint it. + */ + +static void aac_rx_interrupt_adapter(struct aac_dev *dev) +{ + rx_sync_cmd(dev, BREAKPOINT_REQUEST, 0, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL); +} + +/** + * aac_rx_notify_adapter - send an event to the adapter + * @dev: Adapter + * @event: Event to send + * + * Notify the i960 that something it probably cares about has + * happened. + */ + +static void aac_rx_notify_adapter(struct aac_dev *dev, u32 event) +{ + switch (event) { + + case AdapNormCmdQue: + rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_1); + break; + case HostNormRespNotFull: + rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_4); + break; + case AdapNormRespQue: + rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_2); + break; + case HostNormCmdNotFull: + rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_3); + break; + case HostShutdown: + break; + case FastIo: + rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_6); + break; + case AdapPrintfDone: + rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_5); + break; + default: + BUG(); + break; + } +} + +/** + * aac_rx_start_adapter - activate adapter + * @dev: Adapter + * + * Start up processing on an i960 based AAC adapter + */ + +static void aac_rx_start_adapter(struct aac_dev *dev) +{ + union aac_init *init; + + init = dev->init; + init->r7.host_elapsed_seconds = cpu_to_le32(ktime_get_real_seconds()); + // We can only use a 32 bit address here + rx_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa, + 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL); +} + +/** + * aac_rx_check_health + * @dev: device to check if healthy + * + * Will attempt to determine if the specified adapter is alive and + * capable of handling requests, returning 0 if alive. + */ +static int aac_rx_check_health(struct aac_dev *dev) +{ + u32 status = rx_readl(dev, MUnit.OMRx[0]); + + /* + * Check to see if the board failed any self tests. + */ + if (unlikely(status & SELF_TEST_FAILED)) + return -1; + /* + * Check to see if the board panic'd. + */ + if (unlikely(status & KERNEL_PANIC)) { + char * buffer; + struct POSTSTATUS { + __le32 Post_Command; + __le32 Post_Address; + } * post; + dma_addr_t paddr, baddr; + int ret; + + if (likely((status & 0xFF000000L) == 0xBC000000L)) + return (status >> 16) & 0xFF; + buffer = dma_alloc_coherent(&dev->pdev->dev, 512, &baddr, + GFP_KERNEL); + ret = -2; + if (unlikely(buffer == NULL)) + return ret; + post = dma_alloc_coherent(&dev->pdev->dev, + sizeof(struct POSTSTATUS), &paddr, + GFP_KERNEL); + if (unlikely(post == NULL)) { + dma_free_coherent(&dev->pdev->dev, 512, buffer, baddr); + return ret; + } + memset(buffer, 0, 512); + post->Post_Command = cpu_to_le32(COMMAND_POST_RESULTS); + post->Post_Address = cpu_to_le32(baddr); + rx_writel(dev, MUnit.IMRx[0], paddr); + rx_sync_cmd(dev, COMMAND_POST_RESULTS, baddr, 0, 0, 0, 0, 0, + NULL, NULL, NULL, NULL, NULL); + dma_free_coherent(&dev->pdev->dev, sizeof(struct POSTSTATUS), + post, paddr); + if (likely((buffer[0] == '0') && ((buffer[1] == 'x') || (buffer[1] == 'X')))) { + ret = (hex_to_bin(buffer[2]) << 4) + + hex_to_bin(buffer[3]); + } + dma_free_coherent(&dev->pdev->dev, 512, buffer, baddr); + return ret; + } + /* + * Wait for the adapter to be up and running. + */ + if (unlikely(!(status & KERNEL_UP_AND_RUNNING))) + return -3; + /* + * Everything is OK + */ + return 0; +} + +/** + * aac_rx_deliver_producer + * @fib: fib to issue + * + * Will send a fib, returning 0 if successful. + */ +int aac_rx_deliver_producer(struct fib * fib) +{ + struct aac_dev *dev = fib->dev; + struct aac_queue *q = &dev->queues->queue[AdapNormCmdQueue]; + u32 Index; + unsigned long nointr = 0; + + aac_queue_get( dev, &Index, AdapNormCmdQueue, fib->hw_fib_va, 1, fib, &nointr); + + atomic_inc(&q->numpending); + *(q->headers.producer) = cpu_to_le32(Index + 1); + if (!(nointr & aac_config.irq_mod)) + aac_adapter_notify(dev, AdapNormCmdQueue); + + return 0; +} + +/** + * aac_rx_deliver_message + * @fib: fib to issue + * + * Will send a fib, returning 0 if successful. + */ +static int aac_rx_deliver_message(struct fib * fib) +{ + struct aac_dev *dev = fib->dev; + struct aac_queue *q = &dev->queues->queue[AdapNormCmdQueue]; + u32 Index; + u64 addr; + volatile void __iomem *device; + + unsigned long count = 10000000L; /* 50 seconds */ + atomic_inc(&q->numpending); + for(;;) { + Index = rx_readl(dev, MUnit.InboundQueue); + if (unlikely(Index == 0xFFFFFFFFL)) + Index = rx_readl(dev, MUnit.InboundQueue); + if (likely(Index != 0xFFFFFFFFL)) + break; + if (--count == 0) { + atomic_dec(&q->numpending); + return -ETIMEDOUT; + } + udelay(5); + } + device = dev->base + Index; + addr = fib->hw_fib_pa; + writel((u32)(addr & 0xffffffff), device); + device += sizeof(u32); + writel((u32)(addr >> 32), device); + device += sizeof(u32); + writel(le16_to_cpu(fib->hw_fib_va->header.Size), device); + rx_writel(dev, MUnit.InboundQueue, Index); + return 0; +} + +/** + * aac_rx_ioremap + * @dev: adapter + * @size: mapping resize request + * + */ +static int aac_rx_ioremap(struct aac_dev * dev, u32 size) +{ + if (!size) { + iounmap(dev->regs.rx); + return 0; + } + dev->base = dev->regs.rx = ioremap(dev->base_start, size); + if (dev->base == NULL) + return -1; + dev->IndexRegs = &dev->regs.rx->IndexRegs; + return 0; +} + +static int aac_rx_restart_adapter(struct aac_dev *dev, int bled, u8 reset_type) +{ + u32 var = 0; + + if (!(dev->supplement_adapter_info.supported_options2 & + AAC_OPTION_MU_RESET) || (bled >= 0) || (bled == -2)) { + if (bled) + printk(KERN_ERR "%s%d: adapter kernel panic'd %x.\n", + dev->name, dev->id, bled); + else { + bled = aac_adapter_sync_cmd(dev, IOP_RESET_ALWAYS, + 0, 0, 0, 0, 0, 0, &var, NULL, NULL, NULL, NULL); + if (!bled && (var != 0x00000001) && (var != 0x3803000F)) + bled = -EINVAL; + } + if (bled && (bled != -ETIMEDOUT)) + bled = aac_adapter_sync_cmd(dev, IOP_RESET, + 0, 0, 0, 0, 0, 0, &var, NULL, NULL, NULL, NULL); + + if (bled && (bled != -ETIMEDOUT)) + return -EINVAL; + } + if (bled && (var == 0x3803000F)) { /* USE_OTHER_METHOD */ + rx_writel(dev, MUnit.reserved2, 3); + msleep(5000); /* Delay 5 seconds */ + var = 0x00000001; + } + if (bled && (var != 0x00000001)) + return -EINVAL; + ssleep(5); + if (rx_readl(dev, MUnit.OMRx[0]) & KERNEL_PANIC) + return -ENODEV; + if (startup_timeout < 300) + startup_timeout = 300; + return 0; +} + +/** + * aac_rx_select_comm - Select communications method + * @dev: Adapter + * @comm: communications method + */ + +int aac_rx_select_comm(struct aac_dev *dev, int comm) +{ + switch (comm) { + case AAC_COMM_PRODUCER: + dev->a_ops.adapter_enable_int = aac_rx_enable_interrupt_producer; + dev->a_ops.adapter_intr = aac_rx_intr_producer; + dev->a_ops.adapter_deliver = aac_rx_deliver_producer; + break; + case AAC_COMM_MESSAGE: + dev->a_ops.adapter_enable_int = aac_rx_enable_interrupt_message; + dev->a_ops.adapter_intr = aac_rx_intr_message; + dev->a_ops.adapter_deliver = aac_rx_deliver_message; + break; + default: + return 1; + } + return 0; +} + +/** + * _aac_rx_init - initialize an i960 based AAC card + * @dev: device to configure + * + * Allocate and set up resources for the i960 based AAC variants. The + * device_interface in the commregion will be allocated and linked + * to the comm region. + */ + +int _aac_rx_init(struct aac_dev *dev) +{ + unsigned long start; + unsigned long status; + int restart = 0; + int instance = dev->id; + const char * name = dev->name; + + if (aac_adapter_ioremap(dev, dev->base_size)) { + printk(KERN_WARNING "%s: unable to map adapter.\n", name); + goto error_iounmap; + } + + /* Failure to reset here is an option ... */ + dev->a_ops.adapter_sync_cmd = rx_sync_cmd; + dev->a_ops.adapter_enable_int = aac_rx_disable_interrupt; + dev->OIMR = status = rx_readb (dev, MUnit.OIMR); + + if (((status & 0x0c) != 0x0c) || dev->init_reset) { + dev->init_reset = false; + if (!aac_rx_restart_adapter(dev, 0, IOP_HWSOFT_RESET)) { + /* Make sure the Hardware FIFO is empty */ + while ((++restart < 512) && + (rx_readl(dev, MUnit.OutboundQueue) != 0xFFFFFFFFL)); + } + } + + /* + * Check to see if the board panic'd while booting. + */ + status = rx_readl(dev, MUnit.OMRx[0]); + if (status & KERNEL_PANIC) { + if (aac_rx_restart_adapter(dev, + aac_rx_check_health(dev), IOP_HWSOFT_RESET)) + goto error_iounmap; + ++restart; + } + /* + * Check to see if the board failed any self tests. + */ + status = rx_readl(dev, MUnit.OMRx[0]); + if (status & SELF_TEST_FAILED) { + printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance); + goto error_iounmap; + } + /* + * Check to see if the monitor panic'd while booting. + */ + if (status & MONITOR_PANIC) { + printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance); + goto error_iounmap; + } + start = jiffies; + /* + * Wait for the adapter to be up and running. Wait up to 3 minutes + */ + while (!((status = rx_readl(dev, MUnit.OMRx[0])) & KERNEL_UP_AND_RUNNING)) + { + if ((restart && + (status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) || + time_after(jiffies, start+HZ*startup_timeout)) { + printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n", + dev->name, instance, status); + goto error_iounmap; + } + if (!restart && + ((status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC)) || + time_after(jiffies, start + HZ * + ((startup_timeout > 60) + ? (startup_timeout - 60) + : (startup_timeout / 2))))) { + if (likely(!aac_rx_restart_adapter(dev, + aac_rx_check_health(dev), IOP_HWSOFT_RESET))) + start = jiffies; + ++restart; + } + msleep(1); + } + if (restart && aac_commit) + aac_commit = 1; + /* + * Fill in the common function dispatch table. + */ + dev->a_ops.adapter_interrupt = aac_rx_interrupt_adapter; + dev->a_ops.adapter_disable_int = aac_rx_disable_interrupt; + dev->a_ops.adapter_notify = aac_rx_notify_adapter; + dev->a_ops.adapter_sync_cmd = rx_sync_cmd; + dev->a_ops.adapter_check_health = aac_rx_check_health; + dev->a_ops.adapter_restart = aac_rx_restart_adapter; + dev->a_ops.adapter_start = aac_rx_start_adapter; + + /* + * First clear out all interrupts. Then enable the one's that we + * can handle. + */ + aac_adapter_comm(dev, AAC_COMM_PRODUCER); + aac_adapter_disable_int(dev); + rx_writel(dev, MUnit.ODR, 0xffffffff); + aac_adapter_enable_int(dev); + + if (aac_init_adapter(dev) == NULL) + goto error_iounmap; + aac_adapter_comm(dev, dev->comm_interface); + dev->sync_mode = 0; /* sync. mode not supported */ + dev->msi = aac_msi && !pci_enable_msi(dev->pdev); + if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr, + IRQF_SHARED, "aacraid", dev) < 0) { + if (dev->msi) + pci_disable_msi(dev->pdev); + printk(KERN_ERR "%s%d: Interrupt unavailable.\n", + name, instance); + goto error_iounmap; + } + dev->dbg_base = dev->base_start; + dev->dbg_base_mapped = dev->base; + dev->dbg_size = dev->base_size; + + aac_adapter_enable_int(dev); + /* + * Tell the adapter that all is configured, and it can + * start accepting requests + */ + aac_rx_start_adapter(dev); + + return 0; + +error_iounmap: + + return -1; +} + +int aac_rx_init(struct aac_dev *dev) +{ + /* + * Fill in the function dispatch table. + */ + dev->a_ops.adapter_ioremap = aac_rx_ioremap; + dev->a_ops.adapter_comm = aac_rx_select_comm; + + return _aac_rx_init(dev); +} |