summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qlogicpti.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qlogicpti.c')
-rw-r--r--drivers/scsi/qlogicpti.c1477
1 files changed, 1477 insertions, 0 deletions
diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
new file mode 100644
index 000000000..8c961ff03
--- /dev/null
+++ b/drivers/scsi/qlogicpti.c
@@ -0,0 +1,1477 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* qlogicpti.c: Performance Technologies QlogicISP sbus card driver.
+ *
+ * Copyright (C) 1996, 2006, 2008 David S. Miller (davem@davemloft.net)
+ *
+ * A lot of this driver was directly stolen from Erik H. Moe's PCI
+ * Qlogic ISP driver. Mucho kudos to him for this code.
+ *
+ * An even bigger kudos to John Grana at Performance Technologies
+ * for providing me with the hardware to write this driver, you rule
+ * John you really do.
+ *
+ * May, 2, 1997: Added support for QLGC,isp --jj
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/gfp.h>
+#include <linux/blkdev.h>
+#include <linux/proc_fs.h>
+#include <linux/stat.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/dma-mapping.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/firmware.h>
+#include <linux/pgtable.h>
+
+#include <asm/byteorder.h>
+
+#include "qlogicpti.h"
+
+#include <asm/dma.h>
+#include <asm/ptrace.h>
+#include <asm/oplib.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_host.h>
+
+#define MAX_TARGETS 16
+#define MAX_LUNS 8 /* 32 for 1.31 F/W */
+
+#define DEFAULT_LOOP_COUNT 10000
+
+static struct qlogicpti *qptichain = NULL;
+static DEFINE_SPINLOCK(qptichain_lock);
+
+#define PACKB(a, b) (((a)<<4)|(b))
+
+static const u_char mbox_param[] = {
+ PACKB(1, 1), /* MBOX_NO_OP */
+ PACKB(5, 5), /* MBOX_LOAD_RAM */
+ PACKB(2, 0), /* MBOX_EXEC_FIRMWARE */
+ PACKB(5, 5), /* MBOX_DUMP_RAM */
+ PACKB(3, 3), /* MBOX_WRITE_RAM_WORD */
+ PACKB(2, 3), /* MBOX_READ_RAM_WORD */
+ PACKB(6, 6), /* MBOX_MAILBOX_REG_TEST */
+ PACKB(2, 3), /* MBOX_VERIFY_CHECKSUM */
+ PACKB(1, 3), /* MBOX_ABOUT_FIRMWARE */
+ PACKB(0, 0), /* 0x0009 */
+ PACKB(0, 0), /* 0x000a */
+ PACKB(0, 0), /* 0x000b */
+ PACKB(0, 0), /* 0x000c */
+ PACKB(0, 0), /* 0x000d */
+ PACKB(1, 2), /* MBOX_CHECK_FIRMWARE */
+ PACKB(0, 0), /* 0x000f */
+ PACKB(5, 5), /* MBOX_INIT_REQ_QUEUE */
+ PACKB(6, 6), /* MBOX_INIT_RES_QUEUE */
+ PACKB(4, 4), /* MBOX_EXECUTE_IOCB */
+ PACKB(2, 2), /* MBOX_WAKE_UP */
+ PACKB(1, 6), /* MBOX_STOP_FIRMWARE */
+ PACKB(4, 4), /* MBOX_ABORT */
+ PACKB(2, 2), /* MBOX_ABORT_DEVICE */
+ PACKB(3, 3), /* MBOX_ABORT_TARGET */
+ PACKB(2, 2), /* MBOX_BUS_RESET */
+ PACKB(2, 3), /* MBOX_STOP_QUEUE */
+ PACKB(2, 3), /* MBOX_START_QUEUE */
+ PACKB(2, 3), /* MBOX_SINGLE_STEP_QUEUE */
+ PACKB(2, 3), /* MBOX_ABORT_QUEUE */
+ PACKB(2, 4), /* MBOX_GET_DEV_QUEUE_STATUS */
+ PACKB(0, 0), /* 0x001e */
+ PACKB(1, 3), /* MBOX_GET_FIRMWARE_STATUS */
+ PACKB(1, 2), /* MBOX_GET_INIT_SCSI_ID */
+ PACKB(1, 2), /* MBOX_GET_SELECT_TIMEOUT */
+ PACKB(1, 3), /* MBOX_GET_RETRY_COUNT */
+ PACKB(1, 2), /* MBOX_GET_TAG_AGE_LIMIT */
+ PACKB(1, 2), /* MBOX_GET_CLOCK_RATE */
+ PACKB(1, 2), /* MBOX_GET_ACT_NEG_STATE */
+ PACKB(1, 2), /* MBOX_GET_ASYNC_DATA_SETUP_TIME */
+ PACKB(1, 3), /* MBOX_GET_SBUS_PARAMS */
+ PACKB(2, 4), /* MBOX_GET_TARGET_PARAMS */
+ PACKB(2, 4), /* MBOX_GET_DEV_QUEUE_PARAMS */
+ PACKB(0, 0), /* 0x002a */
+ PACKB(0, 0), /* 0x002b */
+ PACKB(0, 0), /* 0x002c */
+ PACKB(0, 0), /* 0x002d */
+ PACKB(0, 0), /* 0x002e */
+ PACKB(0, 0), /* 0x002f */
+ PACKB(2, 2), /* MBOX_SET_INIT_SCSI_ID */
+ PACKB(2, 2), /* MBOX_SET_SELECT_TIMEOUT */
+ PACKB(3, 3), /* MBOX_SET_RETRY_COUNT */
+ PACKB(2, 2), /* MBOX_SET_TAG_AGE_LIMIT */
+ PACKB(2, 2), /* MBOX_SET_CLOCK_RATE */
+ PACKB(2, 2), /* MBOX_SET_ACTIVE_NEG_STATE */
+ PACKB(2, 2), /* MBOX_SET_ASYNC_DATA_SETUP_TIME */
+ PACKB(3, 3), /* MBOX_SET_SBUS_CONTROL_PARAMS */
+ PACKB(4, 4), /* MBOX_SET_TARGET_PARAMS */
+ PACKB(4, 4), /* MBOX_SET_DEV_QUEUE_PARAMS */
+ PACKB(0, 0), /* 0x003a */
+ PACKB(0, 0), /* 0x003b */
+ PACKB(0, 0), /* 0x003c */
+ PACKB(0, 0), /* 0x003d */
+ PACKB(0, 0), /* 0x003e */
+ PACKB(0, 0), /* 0x003f */
+ PACKB(0, 0), /* 0x0040 */
+ PACKB(0, 0), /* 0x0041 */
+ PACKB(0, 0) /* 0x0042 */
+};
+
+#define MAX_MBOX_COMMAND ARRAY_SIZE(mbox_param)
+
+/* queue length's _must_ be power of two: */
+#define QUEUE_DEPTH(in, out, ql) ((in - out) & (ql))
+#define REQ_QUEUE_DEPTH(in, out) QUEUE_DEPTH(in, out, \
+ QLOGICPTI_REQ_QUEUE_LEN)
+#define RES_QUEUE_DEPTH(in, out) QUEUE_DEPTH(in, out, RES_QUEUE_LEN)
+
+static inline void qlogicpti_enable_irqs(struct qlogicpti *qpti)
+{
+ sbus_writew(SBUS_CTRL_ERIRQ | SBUS_CTRL_GENAB,
+ qpti->qregs + SBUS_CTRL);
+}
+
+static inline void qlogicpti_disable_irqs(struct qlogicpti *qpti)
+{
+ sbus_writew(0, qpti->qregs + SBUS_CTRL);
+}
+
+static inline void set_sbus_cfg1(struct qlogicpti *qpti)
+{
+ u16 val;
+ u8 bursts = qpti->bursts;
+
+#if 0 /* It appears that at least PTI cards do not support
+ * 64-byte bursts and that setting the B64 bit actually
+ * is a nop and the chip ends up using the smallest burst
+ * size. -DaveM
+ */
+ if (sbus_can_burst64() && (bursts & DMA_BURST64)) {
+ val = (SBUS_CFG1_BENAB | SBUS_CFG1_B64);
+ } else
+#endif
+ if (bursts & DMA_BURST32) {
+ val = (SBUS_CFG1_BENAB | SBUS_CFG1_B32);
+ } else if (bursts & DMA_BURST16) {
+ val = (SBUS_CFG1_BENAB | SBUS_CFG1_B16);
+ } else if (bursts & DMA_BURST8) {
+ val = (SBUS_CFG1_BENAB | SBUS_CFG1_B8);
+ } else {
+ val = 0; /* No sbus bursts for you... */
+ }
+ sbus_writew(val, qpti->qregs + SBUS_CFG1);
+}
+
+static int qlogicpti_mbox_command(struct qlogicpti *qpti, u_short param[], int force)
+{
+ int loop_count;
+ u16 tmp;
+
+ if (mbox_param[param[0]] == 0)
+ return 1;
+
+ /* Set SBUS semaphore. */
+ tmp = sbus_readw(qpti->qregs + SBUS_SEMAPHORE);
+ tmp |= SBUS_SEMAPHORE_LCK;
+ sbus_writew(tmp, qpti->qregs + SBUS_SEMAPHORE);
+
+ /* Wait for host IRQ bit to clear. */
+ loop_count = DEFAULT_LOOP_COUNT;
+ while (--loop_count && (sbus_readw(qpti->qregs + HCCTRL) & HCCTRL_HIRQ)) {
+ barrier();
+ cpu_relax();
+ }
+ if (!loop_count)
+ printk(KERN_EMERG "qlogicpti%d: mbox_command loop timeout #1\n",
+ qpti->qpti_id);
+
+ /* Write mailbox command registers. */
+ switch (mbox_param[param[0]] >> 4) {
+ case 6: sbus_writew(param[5], qpti->qregs + MBOX5);
+ fallthrough;
+ case 5: sbus_writew(param[4], qpti->qregs + MBOX4);
+ fallthrough;
+ case 4: sbus_writew(param[3], qpti->qregs + MBOX3);
+ fallthrough;
+ case 3: sbus_writew(param[2], qpti->qregs + MBOX2);
+ fallthrough;
+ case 2: sbus_writew(param[1], qpti->qregs + MBOX1);
+ fallthrough;
+ case 1: sbus_writew(param[0], qpti->qregs + MBOX0);
+ }
+
+ /* Clear RISC interrupt. */
+ tmp = sbus_readw(qpti->qregs + HCCTRL);
+ tmp |= HCCTRL_CRIRQ;
+ sbus_writew(tmp, qpti->qregs + HCCTRL);
+
+ /* Clear SBUS semaphore. */
+ sbus_writew(0, qpti->qregs + SBUS_SEMAPHORE);
+
+ /* Set HOST interrupt. */
+ tmp = sbus_readw(qpti->qregs + HCCTRL);
+ tmp |= HCCTRL_SHIRQ;
+ sbus_writew(tmp, qpti->qregs + HCCTRL);
+
+ /* Wait for HOST interrupt clears. */
+ loop_count = DEFAULT_LOOP_COUNT;
+ while (--loop_count &&
+ (sbus_readw(qpti->qregs + HCCTRL) & HCCTRL_CRIRQ))
+ udelay(20);
+ if (!loop_count)
+ printk(KERN_EMERG "qlogicpti%d: mbox_command[%04x] loop timeout #2\n",
+ qpti->qpti_id, param[0]);
+
+ /* Wait for SBUS semaphore to get set. */
+ loop_count = DEFAULT_LOOP_COUNT;
+ while (--loop_count &&
+ !(sbus_readw(qpti->qregs + SBUS_SEMAPHORE) & SBUS_SEMAPHORE_LCK)) {
+ udelay(20);
+
+ /* Workaround for some buggy chips. */
+ if (sbus_readw(qpti->qregs + MBOX0) & 0x4000)
+ break;
+ }
+ if (!loop_count)
+ printk(KERN_EMERG "qlogicpti%d: mbox_command[%04x] loop timeout #3\n",
+ qpti->qpti_id, param[0]);
+
+ /* Wait for MBOX busy condition to go away. */
+ loop_count = DEFAULT_LOOP_COUNT;
+ while (--loop_count && (sbus_readw(qpti->qregs + MBOX0) == 0x04))
+ udelay(20);
+ if (!loop_count)
+ printk(KERN_EMERG "qlogicpti%d: mbox_command[%04x] loop timeout #4\n",
+ qpti->qpti_id, param[0]);
+
+ /* Read back output parameters. */
+ switch (mbox_param[param[0]] & 0xf) {
+ case 6: param[5] = sbus_readw(qpti->qregs + MBOX5);
+ fallthrough;
+ case 5: param[4] = sbus_readw(qpti->qregs + MBOX4);
+ fallthrough;
+ case 4: param[3] = sbus_readw(qpti->qregs + MBOX3);
+ fallthrough;
+ case 3: param[2] = sbus_readw(qpti->qregs + MBOX2);
+ fallthrough;
+ case 2: param[1] = sbus_readw(qpti->qregs + MBOX1);
+ fallthrough;
+ case 1: param[0] = sbus_readw(qpti->qregs + MBOX0);
+ }
+
+ /* Clear RISC interrupt. */
+ tmp = sbus_readw(qpti->qregs + HCCTRL);
+ tmp |= HCCTRL_CRIRQ;
+ sbus_writew(tmp, qpti->qregs + HCCTRL);
+
+ /* Release SBUS semaphore. */
+ tmp = sbus_readw(qpti->qregs + SBUS_SEMAPHORE);
+ tmp &= ~(SBUS_SEMAPHORE_LCK);
+ sbus_writew(tmp, qpti->qregs + SBUS_SEMAPHORE);
+
+ /* We're done. */
+ return 0;
+}
+
+static inline void qlogicpti_set_hostdev_defaults(struct qlogicpti *qpti)
+{
+ int i;
+
+ qpti->host_param.initiator_scsi_id = qpti->scsi_id;
+ qpti->host_param.bus_reset_delay = 3;
+ qpti->host_param.retry_count = 0;
+ qpti->host_param.retry_delay = 5;
+ qpti->host_param.async_data_setup_time = 3;
+ qpti->host_param.req_ack_active_negation = 1;
+ qpti->host_param.data_line_active_negation = 1;
+ qpti->host_param.data_dma_burst_enable = 1;
+ qpti->host_param.command_dma_burst_enable = 1;
+ qpti->host_param.tag_aging = 8;
+ qpti->host_param.selection_timeout = 250;
+ qpti->host_param.max_queue_depth = 256;
+
+ for(i = 0; i < MAX_TARGETS; i++) {
+ /*
+ * disconnect, parity, arq, reneg on reset, and, oddly enough
+ * tags...the midlayer's notion of tagged support has to match
+ * our device settings, and since we base whether we enable a
+ * tag on a per-cmnd basis upon what the midlayer sez, we
+ * actually enable the capability here.
+ */
+ qpti->dev_param[i].device_flags = 0xcd;
+ qpti->dev_param[i].execution_throttle = 16;
+ if (qpti->ultra) {
+ qpti->dev_param[i].synchronous_period = 12;
+ qpti->dev_param[i].synchronous_offset = 8;
+ } else {
+ qpti->dev_param[i].synchronous_period = 25;
+ qpti->dev_param[i].synchronous_offset = 12;
+ }
+ qpti->dev_param[i].device_enable = 1;
+ }
+}
+
+static int qlogicpti_reset_hardware(struct Scsi_Host *host)
+{
+ struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata;
+ u_short param[6];
+ unsigned short risc_code_addr;
+ int loop_count, i;
+ unsigned long flags;
+
+ risc_code_addr = 0x1000; /* all load addresses are at 0x1000 */
+
+ spin_lock_irqsave(host->host_lock, flags);
+
+ sbus_writew(HCCTRL_PAUSE, qpti->qregs + HCCTRL);
+
+ /* Only reset the scsi bus if it is not free. */
+ if (sbus_readw(qpti->qregs + CPU_PCTRL) & CPU_PCTRL_BSY) {
+ sbus_writew(CPU_ORIDE_RMOD, qpti->qregs + CPU_ORIDE);
+ sbus_writew(CPU_CMD_BRESET, qpti->qregs + CPU_CMD);
+ udelay(400);
+ }
+
+ sbus_writew(SBUS_CTRL_RESET, qpti->qregs + SBUS_CTRL);
+ sbus_writew((DMA_CTRL_CCLEAR | DMA_CTRL_CIRQ), qpti->qregs + CMD_DMA_CTRL);
+ sbus_writew((DMA_CTRL_CCLEAR | DMA_CTRL_CIRQ), qpti->qregs + DATA_DMA_CTRL);
+
+ loop_count = DEFAULT_LOOP_COUNT;
+ while (--loop_count && ((sbus_readw(qpti->qregs + MBOX0) & 0xff) == 0x04))
+ udelay(20);
+ if (!loop_count)
+ printk(KERN_EMERG "qlogicpti%d: reset_hardware loop timeout\n",
+ qpti->qpti_id);
+
+ sbus_writew(HCCTRL_PAUSE, qpti->qregs + HCCTRL);
+ set_sbus_cfg1(qpti);
+ qlogicpti_enable_irqs(qpti);
+
+ if (sbus_readw(qpti->qregs + RISC_PSR) & RISC_PSR_ULTRA) {
+ qpti->ultra = 1;
+ sbus_writew((RISC_MTREG_P0ULTRA | RISC_MTREG_P1ULTRA),
+ qpti->qregs + RISC_MTREG);
+ } else {
+ qpti->ultra = 0;
+ sbus_writew((RISC_MTREG_P0DFLT | RISC_MTREG_P1DFLT),
+ qpti->qregs + RISC_MTREG);
+ }
+
+ /* reset adapter and per-device default values. */
+ /* do it after finding out whether we're ultra mode capable */
+ qlogicpti_set_hostdev_defaults(qpti);
+
+ /* Release the RISC processor. */
+ sbus_writew(HCCTRL_REL, qpti->qregs + HCCTRL);
+
+ /* Get RISC to start executing the firmware code. */
+ param[0] = MBOX_EXEC_FIRMWARE;
+ param[1] = risc_code_addr;
+ if (qlogicpti_mbox_command(qpti, param, 1)) {
+ printk(KERN_EMERG "qlogicpti%d: Cannot execute ISP firmware.\n",
+ qpti->qpti_id);
+ spin_unlock_irqrestore(host->host_lock, flags);
+ return 1;
+ }
+
+ /* Set initiator scsi ID. */
+ param[0] = MBOX_SET_INIT_SCSI_ID;
+ param[1] = qpti->host_param.initiator_scsi_id;
+ if (qlogicpti_mbox_command(qpti, param, 1) ||
+ (param[0] != MBOX_COMMAND_COMPLETE)) {
+ printk(KERN_EMERG "qlogicpti%d: Cannot set initiator SCSI ID.\n",
+ qpti->qpti_id);
+ spin_unlock_irqrestore(host->host_lock, flags);
+ return 1;
+ }
+
+ /* Initialize state of the queues, both hw and sw. */
+ qpti->req_in_ptr = qpti->res_out_ptr = 0;
+
+ param[0] = MBOX_INIT_RES_QUEUE;
+ param[1] = RES_QUEUE_LEN + 1;
+ param[2] = (u_short) (qpti->res_dvma >> 16);
+ param[3] = (u_short) (qpti->res_dvma & 0xffff);
+ param[4] = param[5] = 0;
+ if (qlogicpti_mbox_command(qpti, param, 1)) {
+ printk(KERN_EMERG "qlogicpti%d: Cannot init response queue.\n",
+ qpti->qpti_id);
+ spin_unlock_irqrestore(host->host_lock, flags);
+ return 1;
+ }
+
+ param[0] = MBOX_INIT_REQ_QUEUE;
+ param[1] = QLOGICPTI_REQ_QUEUE_LEN + 1;
+ param[2] = (u_short) (qpti->req_dvma >> 16);
+ param[3] = (u_short) (qpti->req_dvma & 0xffff);
+ param[4] = param[5] = 0;
+ if (qlogicpti_mbox_command(qpti, param, 1)) {
+ printk(KERN_EMERG "qlogicpti%d: Cannot init request queue.\n",
+ qpti->qpti_id);
+ spin_unlock_irqrestore(host->host_lock, flags);
+ return 1;
+ }
+
+ param[0] = MBOX_SET_RETRY_COUNT;
+ param[1] = qpti->host_param.retry_count;
+ param[2] = qpti->host_param.retry_delay;
+ qlogicpti_mbox_command(qpti, param, 0);
+
+ param[0] = MBOX_SET_TAG_AGE_LIMIT;
+ param[1] = qpti->host_param.tag_aging;
+ qlogicpti_mbox_command(qpti, param, 0);
+
+ for (i = 0; i < MAX_TARGETS; i++) {
+ param[0] = MBOX_GET_DEV_QUEUE_PARAMS;
+ param[1] = (i << 8);
+ qlogicpti_mbox_command(qpti, param, 0);
+ }
+
+ param[0] = MBOX_GET_FIRMWARE_STATUS;
+ qlogicpti_mbox_command(qpti, param, 0);
+
+ param[0] = MBOX_SET_SELECT_TIMEOUT;
+ param[1] = qpti->host_param.selection_timeout;
+ qlogicpti_mbox_command(qpti, param, 0);
+
+ for (i = 0; i < MAX_TARGETS; i++) {
+ param[0] = MBOX_SET_TARGET_PARAMS;
+ param[1] = (i << 8);
+ param[2] = (qpti->dev_param[i].device_flags << 8);
+ /*
+ * Since we're now loading 1.31 f/w, force narrow/async.
+ */
+ param[2] |= 0xc0;
+ param[3] = 0; /* no offset, we do not have sync mode yet */
+ qlogicpti_mbox_command(qpti, param, 0);
+ }
+
+ /*
+ * Always (sigh) do an initial bus reset (kicks f/w).
+ */
+ param[0] = MBOX_BUS_RESET;
+ param[1] = qpti->host_param.bus_reset_delay;
+ qlogicpti_mbox_command(qpti, param, 0);
+ qpti->send_marker = 1;
+
+ spin_unlock_irqrestore(host->host_lock, flags);
+ return 0;
+}
+
+#define PTI_RESET_LIMIT 400
+
+static int qlogicpti_load_firmware(struct qlogicpti *qpti)
+{
+ const struct firmware *fw;
+ const char fwname[] = "qlogic/isp1000.bin";
+ const __le16 *fw_data;
+ struct Scsi_Host *host = qpti->qhost;
+ unsigned short csum = 0;
+ unsigned short param[6];
+ unsigned short risc_code_addr, risc_code_length;
+ int err;
+ unsigned long flags;
+ int i, timeout;
+
+ err = request_firmware(&fw, fwname, &qpti->op->dev);
+ if (err) {
+ printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
+ fwname, err);
+ return err;
+ }
+ if (fw->size % 2) {
+ printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
+ fw->size, fwname);
+ err = -EINVAL;
+ goto outfirm;
+ }
+ fw_data = (const __le16 *)&fw->data[0];
+ risc_code_addr = 0x1000; /* all f/w modules load at 0x1000 */
+ risc_code_length = fw->size / 2;
+
+ spin_lock_irqsave(host->host_lock, flags);
+
+ /* Verify the checksum twice, one before loading it, and once
+ * afterwards via the mailbox commands.
+ */
+ for (i = 0; i < risc_code_length; i++)
+ csum += __le16_to_cpu(fw_data[i]);
+ if (csum) {
+ printk(KERN_EMERG "qlogicpti%d: Aieee, firmware checksum failed!",
+ qpti->qpti_id);
+ err = 1;
+ goto out;
+ }
+ sbus_writew(SBUS_CTRL_RESET, qpti->qregs + SBUS_CTRL);
+ sbus_writew((DMA_CTRL_CCLEAR | DMA_CTRL_CIRQ), qpti->qregs + CMD_DMA_CTRL);
+ sbus_writew((DMA_CTRL_CCLEAR | DMA_CTRL_CIRQ), qpti->qregs + DATA_DMA_CTRL);
+ timeout = PTI_RESET_LIMIT;
+ while (--timeout && (sbus_readw(qpti->qregs + SBUS_CTRL) & SBUS_CTRL_RESET))
+ udelay(20);
+ if (!timeout) {
+ printk(KERN_EMERG "qlogicpti%d: Cannot reset the ISP.", qpti->qpti_id);
+ err = 1;
+ goto out;
+ }
+
+ sbus_writew(HCCTRL_RESET, qpti->qregs + HCCTRL);
+ mdelay(1);
+
+ sbus_writew((SBUS_CTRL_GENAB | SBUS_CTRL_ERIRQ), qpti->qregs + SBUS_CTRL);
+ set_sbus_cfg1(qpti);
+ sbus_writew(0, qpti->qregs + SBUS_SEMAPHORE);
+
+ if (sbus_readw(qpti->qregs + RISC_PSR) & RISC_PSR_ULTRA) {
+ qpti->ultra = 1;
+ sbus_writew((RISC_MTREG_P0ULTRA | RISC_MTREG_P1ULTRA),
+ qpti->qregs + RISC_MTREG);
+ } else {
+ qpti->ultra = 0;
+ sbus_writew((RISC_MTREG_P0DFLT | RISC_MTREG_P1DFLT),
+ qpti->qregs + RISC_MTREG);
+ }
+
+ sbus_writew(HCCTRL_REL, qpti->qregs + HCCTRL);
+
+ /* Pin lines are only stable while RISC is paused. */
+ sbus_writew(HCCTRL_PAUSE, qpti->qregs + HCCTRL);
+ if (sbus_readw(qpti->qregs + CPU_PDIFF) & CPU_PDIFF_MODE)
+ qpti->differential = 1;
+ else
+ qpti->differential = 0;
+ sbus_writew(HCCTRL_REL, qpti->qregs + HCCTRL);
+
+ /* This shouldn't be necessary- we've reset things so we should be
+ running from the ROM now.. */
+
+ param[0] = MBOX_STOP_FIRMWARE;
+ param[1] = param[2] = param[3] = param[4] = param[5] = 0;
+ if (qlogicpti_mbox_command(qpti, param, 1)) {
+ printk(KERN_EMERG "qlogicpti%d: Cannot stop firmware for reload.\n",
+ qpti->qpti_id);
+ err = 1;
+ goto out;
+ }
+
+ /* Load it up.. */
+ for (i = 0; i < risc_code_length; i++) {
+ param[0] = MBOX_WRITE_RAM_WORD;
+ param[1] = risc_code_addr + i;
+ param[2] = __le16_to_cpu(fw_data[i]);
+ if (qlogicpti_mbox_command(qpti, param, 1) ||
+ param[0] != MBOX_COMMAND_COMPLETE) {
+ printk("qlogicpti%d: Firmware dload failed, I'm bolixed!\n",
+ qpti->qpti_id);
+ err = 1;
+ goto out;
+ }
+ }
+
+ /* Reset the ISP again. */
+ sbus_writew(HCCTRL_RESET, qpti->qregs + HCCTRL);
+ mdelay(1);
+
+ qlogicpti_enable_irqs(qpti);
+ sbus_writew(0, qpti->qregs + SBUS_SEMAPHORE);
+ sbus_writew(HCCTRL_REL, qpti->qregs + HCCTRL);
+
+ /* Ask ISP to verify the checksum of the new code. */
+ param[0] = MBOX_VERIFY_CHECKSUM;
+ param[1] = risc_code_addr;
+ if (qlogicpti_mbox_command(qpti, param, 1) ||
+ (param[0] != MBOX_COMMAND_COMPLETE)) {
+ printk(KERN_EMERG "qlogicpti%d: New firmware csum failure!\n",
+ qpti->qpti_id);
+ err = 1;
+ goto out;
+ }
+
+ /* Start using newly downloaded firmware. */
+ param[0] = MBOX_EXEC_FIRMWARE;
+ param[1] = risc_code_addr;
+ qlogicpti_mbox_command(qpti, param, 1);
+
+ param[0] = MBOX_ABOUT_FIRMWARE;
+ if (qlogicpti_mbox_command(qpti, param, 1) ||
+ (param[0] != MBOX_COMMAND_COMPLETE)) {
+ printk(KERN_EMERG "qlogicpti%d: AboutFirmware cmd fails.\n",
+ qpti->qpti_id);
+ err = 1;
+ goto out;
+ }
+
+ /* Snag the major and minor revisions from the result. */
+ qpti->fware_majrev = param[1];
+ qpti->fware_minrev = param[2];
+ qpti->fware_micrev = param[3];
+
+ /* Set the clock rate */
+ param[0] = MBOX_SET_CLOCK_RATE;
+ param[1] = qpti->clock;
+ if (qlogicpti_mbox_command(qpti, param, 1) ||
+ (param[0] != MBOX_COMMAND_COMPLETE)) {
+ printk(KERN_EMERG "qlogicpti%d: could not set clock rate.\n",
+ qpti->qpti_id);
+ err = 1;
+ goto out;
+ }
+
+ if (qpti->is_pti != 0) {
+ /* Load scsi initiator ID and interrupt level into sbus static ram. */
+ param[0] = MBOX_WRITE_RAM_WORD;
+ param[1] = 0xff80;
+ param[2] = (unsigned short) qpti->scsi_id;
+ qlogicpti_mbox_command(qpti, param, 1);
+
+ param[0] = MBOX_WRITE_RAM_WORD;
+ param[1] = 0xff00;
+ param[2] = (unsigned short) 3;
+ qlogicpti_mbox_command(qpti, param, 1);
+ }
+
+out:
+ spin_unlock_irqrestore(host->host_lock, flags);
+outfirm:
+ release_firmware(fw);
+ return err;
+}
+
+static int qlogicpti_verify_tmon(struct qlogicpti *qpti)
+{
+ int curstat = sbus_readb(qpti->sreg);
+
+ curstat &= 0xf0;
+ if (!(curstat & SREG_FUSE) && (qpti->swsreg & SREG_FUSE))
+ printk("qlogicpti%d: Fuse returned to normal state.\n", qpti->qpti_id);
+ if (!(curstat & SREG_TPOWER) && (qpti->swsreg & SREG_TPOWER))
+ printk("qlogicpti%d: termpwr back to normal state.\n", qpti->qpti_id);
+ if (curstat != qpti->swsreg) {
+ int error = 0;
+ if (curstat & SREG_FUSE) {
+ error++;
+ printk("qlogicpti%d: Fuse is open!\n", qpti->qpti_id);
+ }
+ if (curstat & SREG_TPOWER) {
+ error++;
+ printk("qlogicpti%d: termpwr failure\n", qpti->qpti_id);
+ }
+ if (qpti->differential &&
+ (curstat & SREG_DSENSE) != SREG_DSENSE) {
+ error++;
+ printk("qlogicpti%d: You have a single ended device on a "
+ "differential bus! Please fix!\n", qpti->qpti_id);
+ }
+ qpti->swsreg = curstat;
+ return error;
+ }
+ return 0;
+}
+
+static irqreturn_t qpti_intr(int irq, void *dev_id);
+
+static void qpti_chain_add(struct qlogicpti *qpti)
+{
+ spin_lock_irq(&qptichain_lock);
+ if (qptichain != NULL) {
+ struct qlogicpti *qlink = qptichain;
+
+ while(qlink->next)
+ qlink = qlink->next;
+ qlink->next = qpti;
+ } else {
+ qptichain = qpti;
+ }
+ qpti->next = NULL;
+ spin_unlock_irq(&qptichain_lock);
+}
+
+static void qpti_chain_del(struct qlogicpti *qpti)
+{
+ spin_lock_irq(&qptichain_lock);
+ if (qptichain == qpti) {
+ qptichain = qpti->next;
+ } else {
+ struct qlogicpti *qlink = qptichain;
+ while(qlink->next != qpti)
+ qlink = qlink->next;
+ qlink->next = qpti->next;
+ }
+ qpti->next = NULL;
+ spin_unlock_irq(&qptichain_lock);
+}
+
+static int qpti_map_regs(struct qlogicpti *qpti)
+{
+ struct platform_device *op = qpti->op;
+
+ qpti->qregs = of_ioremap(&op->resource[0], 0,
+ resource_size(&op->resource[0]),
+ "PTI Qlogic/ISP");
+ if (!qpti->qregs) {
+ printk("PTI: Qlogic/ISP registers are unmappable\n");
+ return -ENODEV;
+ }
+ if (qpti->is_pti) {
+ qpti->sreg = of_ioremap(&op->resource[0], (16 * 4096),
+ sizeof(unsigned char),
+ "PTI Qlogic/ISP statreg");
+ if (!qpti->sreg) {
+ printk("PTI: Qlogic/ISP status register is unmappable\n");
+ return -ENODEV;
+ }
+ }
+ return 0;
+}
+
+static int qpti_register_irq(struct qlogicpti *qpti)
+{
+ struct platform_device *op = qpti->op;
+
+ qpti->qhost->irq = qpti->irq = op->archdata.irqs[0];
+
+ /* We used to try various overly-clever things to
+ * reduce the interrupt processing overhead on
+ * sun4c/sun4m when multiple PTI's shared the
+ * same IRQ. It was too complex and messy to
+ * sanely maintain.
+ */
+ if (request_irq(qpti->irq, qpti_intr,
+ IRQF_SHARED, "QlogicPTI", qpti))
+ goto fail;
+
+ printk("qlogicpti%d: IRQ %d ", qpti->qpti_id, qpti->irq);
+
+ return 0;
+
+fail:
+ printk("qlogicpti%d: Cannot acquire irq line\n", qpti->qpti_id);
+ return -1;
+}
+
+static void qpti_get_scsi_id(struct qlogicpti *qpti)
+{
+ struct platform_device *op = qpti->op;
+ struct device_node *dp;
+
+ dp = op->dev.of_node;
+
+ qpti->scsi_id = of_getintprop_default(dp, "initiator-id", -1);
+ if (qpti->scsi_id == -1)
+ qpti->scsi_id = of_getintprop_default(dp, "scsi-initiator-id",
+ -1);
+ if (qpti->scsi_id == -1)
+ qpti->scsi_id =
+ of_getintprop_default(dp->parent,
+ "scsi-initiator-id", 7);
+ qpti->qhost->this_id = qpti->scsi_id;
+ qpti->qhost->max_sectors = 64;
+
+ printk("SCSI ID %d ", qpti->scsi_id);
+}
+
+static void qpti_get_bursts(struct qlogicpti *qpti)
+{
+ struct platform_device *op = qpti->op;
+ u8 bursts, bmask;
+
+ bursts = of_getintprop_default(op->dev.of_node, "burst-sizes", 0xff);
+ bmask = of_getintprop_default(op->dev.of_node->parent, "burst-sizes", 0xff);
+ if (bmask != 0xff)
+ bursts &= bmask;
+ if (bursts == 0xff ||
+ (bursts & DMA_BURST16) == 0 ||
+ (bursts & DMA_BURST32) == 0)
+ bursts = (DMA_BURST32 - 1);
+
+ qpti->bursts = bursts;
+}
+
+static void qpti_get_clock(struct qlogicpti *qpti)
+{
+ unsigned int cfreq;
+
+ /* Check for what the clock input to this card is.
+ * Default to 40Mhz.
+ */
+ cfreq = prom_getintdefault(qpti->prom_node,"clock-frequency",40000000);
+ qpti->clock = (cfreq + 500000)/1000000;
+ if (qpti->clock == 0) /* bullshit */
+ qpti->clock = 40;
+}
+
+/* The request and response queues must each be aligned
+ * on a page boundary.
+ */
+static int qpti_map_queues(struct qlogicpti *qpti)
+{
+ struct platform_device *op = qpti->op;
+
+#define QSIZE(entries) (((entries) + 1) * QUEUE_ENTRY_LEN)
+ qpti->res_cpu = dma_alloc_coherent(&op->dev,
+ QSIZE(RES_QUEUE_LEN),
+ &qpti->res_dvma, GFP_ATOMIC);
+ if (qpti->res_cpu == NULL ||
+ qpti->res_dvma == 0) {
+ printk("QPTI: Cannot map response queue.\n");
+ return -1;
+ }
+
+ qpti->req_cpu = dma_alloc_coherent(&op->dev,
+ QSIZE(QLOGICPTI_REQ_QUEUE_LEN),
+ &qpti->req_dvma, GFP_ATOMIC);
+ if (qpti->req_cpu == NULL ||
+ qpti->req_dvma == 0) {
+ dma_free_coherent(&op->dev, QSIZE(RES_QUEUE_LEN),
+ qpti->res_cpu, qpti->res_dvma);
+ printk("QPTI: Cannot map request queue.\n");
+ return -1;
+ }
+ memset(qpti->res_cpu, 0, QSIZE(RES_QUEUE_LEN));
+ memset(qpti->req_cpu, 0, QSIZE(QLOGICPTI_REQ_QUEUE_LEN));
+ return 0;
+}
+
+const char *qlogicpti_info(struct Scsi_Host *host)
+{
+ static char buf[80];
+ struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata;
+
+ sprintf(buf, "PTI Qlogic,ISP SBUS SCSI irq %d regs at %p",
+ qpti->qhost->irq, qpti->qregs);
+ return buf;
+}
+
+/* I am a certified frobtronicist. */
+static inline void marker_frob(struct Command_Entry *cmd)
+{
+ struct Marker_Entry *marker = (struct Marker_Entry *) cmd;
+
+ memset(marker, 0, sizeof(struct Marker_Entry));
+ marker->hdr.entry_cnt = 1;
+ marker->hdr.entry_type = ENTRY_MARKER;
+ marker->modifier = SYNC_ALL;
+ marker->rsvd = 0;
+}
+
+static inline void cmd_frob(struct Command_Entry *cmd, struct scsi_cmnd *Cmnd,
+ struct qlogicpti *qpti)
+{
+ memset(cmd, 0, sizeof(struct Command_Entry));
+ cmd->hdr.entry_cnt = 1;
+ cmd->hdr.entry_type = ENTRY_COMMAND;
+ cmd->target_id = Cmnd->device->id;
+ cmd->target_lun = Cmnd->device->lun;
+ cmd->cdb_length = Cmnd->cmd_len;
+ cmd->control_flags = 0;
+ if (Cmnd->device->tagged_supported) {
+ if (qpti->cmd_count[Cmnd->device->id] == 0)
+ qpti->tag_ages[Cmnd->device->id] = jiffies;
+ if (time_after(jiffies, qpti->tag_ages[Cmnd->device->id] + (5*HZ))) {
+ cmd->control_flags = CFLAG_ORDERED_TAG;
+ qpti->tag_ages[Cmnd->device->id] = jiffies;
+ } else
+ cmd->control_flags = CFLAG_SIMPLE_TAG;
+ }
+ if ((Cmnd->cmnd[0] == WRITE_6) ||
+ (Cmnd->cmnd[0] == WRITE_10) ||
+ (Cmnd->cmnd[0] == WRITE_12))
+ cmd->control_flags |= CFLAG_WRITE;
+ else
+ cmd->control_flags |= CFLAG_READ;
+ cmd->time_out = scsi_cmd_to_rq(Cmnd)->timeout / HZ;
+ memcpy(cmd->cdb, Cmnd->cmnd, Cmnd->cmd_len);
+}
+
+/* Do it to it baby. */
+static inline int load_cmd(struct scsi_cmnd *Cmnd, struct Command_Entry *cmd,
+ struct qlogicpti *qpti, u_int in_ptr, u_int out_ptr)
+{
+ struct dataseg *ds;
+ struct scatterlist *sg, *s;
+ int i, n;
+
+ if (scsi_bufflen(Cmnd)) {
+ int sg_count;
+
+ sg = scsi_sglist(Cmnd);
+ sg_count = dma_map_sg(&qpti->op->dev, sg,
+ scsi_sg_count(Cmnd),
+ Cmnd->sc_data_direction);
+ if (!sg_count)
+ return -1;
+ ds = cmd->dataseg;
+ cmd->segment_cnt = sg_count;
+
+ /* Fill in first four sg entries: */
+ n = sg_count;
+ if (n > 4)
+ n = 4;
+ for_each_sg(sg, s, n, i) {
+ ds[i].d_base = sg_dma_address(s);
+ ds[i].d_count = sg_dma_len(s);
+ }
+ sg_count -= 4;
+ sg = s;
+ while (sg_count > 0) {
+ struct Continuation_Entry *cont;
+
+ ++cmd->hdr.entry_cnt;
+ cont = (struct Continuation_Entry *) &qpti->req_cpu[in_ptr];
+ in_ptr = NEXT_REQ_PTR(in_ptr);
+ if (in_ptr == out_ptr)
+ return -1;
+
+ cont->hdr.entry_type = ENTRY_CONTINUATION;
+ cont->hdr.entry_cnt = 0;
+ cont->hdr.sys_def_1 = 0;
+ cont->hdr.flags = 0;
+ cont->reserved = 0;
+ ds = cont->dataseg;
+ n = sg_count;
+ if (n > 7)
+ n = 7;
+ for_each_sg(sg, s, n, i) {
+ ds[i].d_base = sg_dma_address(s);
+ ds[i].d_count = sg_dma_len(s);
+ }
+ sg_count -= n;
+ sg = s;
+ }
+ } else {
+ cmd->dataseg[0].d_base = 0;
+ cmd->dataseg[0].d_count = 0;
+ cmd->segment_cnt = 1; /* Shouldn't this be 0? */
+ }
+
+ /* Committed, record Scsi_Cmd so we can find it later. */
+ cmd->handle = in_ptr;
+ qpti->cmd_slots[in_ptr] = Cmnd;
+
+ qpti->cmd_count[Cmnd->device->id]++;
+ sbus_writew(in_ptr, qpti->qregs + MBOX4);
+ qpti->req_in_ptr = in_ptr;
+
+ return in_ptr;
+}
+
+static inline void update_can_queue(struct Scsi_Host *host, u_int in_ptr, u_int out_ptr)
+{
+ /* Temporary workaround until bug is found and fixed (one bug has been found
+ already, but fixing it makes things even worse) -jj */
+ int num_free = QLOGICPTI_REQ_QUEUE_LEN - REQ_QUEUE_DEPTH(in_ptr, out_ptr) - 64;
+ host->can_queue = scsi_host_busy(host) + num_free;
+ host->sg_tablesize = QLOGICPTI_MAX_SG(num_free);
+}
+
+static int qlogicpti_slave_configure(struct scsi_device *sdev)
+{
+ struct qlogicpti *qpti = shost_priv(sdev->host);
+ int tgt = sdev->id;
+ u_short param[6];
+
+ /* tags handled in midlayer */
+ /* enable sync mode? */
+ if (sdev->sdtr) {
+ qpti->dev_param[tgt].device_flags |= 0x10;
+ } else {
+ qpti->dev_param[tgt].synchronous_offset = 0;
+ qpti->dev_param[tgt].synchronous_period = 0;
+ }
+ /* are we wide capable? */
+ if (sdev->wdtr)
+ qpti->dev_param[tgt].device_flags |= 0x20;
+
+ param[0] = MBOX_SET_TARGET_PARAMS;
+ param[1] = (tgt << 8);
+ param[2] = (qpti->dev_param[tgt].device_flags << 8);
+ if (qpti->dev_param[tgt].device_flags & 0x10) {
+ param[3] = (qpti->dev_param[tgt].synchronous_offset << 8) |
+ qpti->dev_param[tgt].synchronous_period;
+ } else {
+ param[3] = 0;
+ }
+ qlogicpti_mbox_command(qpti, param, 0);
+ return 0;
+}
+
+/*
+ * The middle SCSI layer ensures that queuecommand never gets invoked
+ * concurrently with itself or the interrupt handler (though the
+ * interrupt handler may call this routine as part of
+ * request-completion handling).
+ *
+ * "This code must fly." -davem
+ */
+static int qlogicpti_queuecommand_lck(struct scsi_cmnd *Cmnd)
+{
+ void (*done)(struct scsi_cmnd *) = scsi_done;
+ struct Scsi_Host *host = Cmnd->device->host;
+ struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata;
+ struct Command_Entry *cmd;
+ u_int out_ptr;
+ int in_ptr;
+
+ in_ptr = qpti->req_in_ptr;
+ cmd = (struct Command_Entry *) &qpti->req_cpu[in_ptr];
+ out_ptr = sbus_readw(qpti->qregs + MBOX4);
+ in_ptr = NEXT_REQ_PTR(in_ptr);
+ if (in_ptr == out_ptr)
+ goto toss_command;
+
+ if (qpti->send_marker) {
+ marker_frob(cmd);
+ qpti->send_marker = 0;
+ if (NEXT_REQ_PTR(in_ptr) == out_ptr) {
+ sbus_writew(in_ptr, qpti->qregs + MBOX4);
+ qpti->req_in_ptr = in_ptr;
+ goto toss_command;
+ }
+ cmd = (struct Command_Entry *) &qpti->req_cpu[in_ptr];
+ in_ptr = NEXT_REQ_PTR(in_ptr);
+ }
+ cmd_frob(cmd, Cmnd, qpti);
+ if ((in_ptr = load_cmd(Cmnd, cmd, qpti, in_ptr, out_ptr)) == -1)
+ goto toss_command;
+
+ update_can_queue(host, in_ptr, out_ptr);
+
+ return 0;
+
+toss_command:
+ printk(KERN_EMERG "qlogicpti%d: request queue overflow\n",
+ qpti->qpti_id);
+
+ /* Unfortunately, unless you use the new EH code, which
+ * we don't, the midlayer will ignore the return value,
+ * which is insane. We pick up the pieces like this.
+ */
+ Cmnd->result = DID_BUS_BUSY;
+ done(Cmnd);
+ return 1;
+}
+
+static DEF_SCSI_QCMD(qlogicpti_queuecommand)
+
+static int qlogicpti_return_status(struct Status_Entry *sts, int id)
+{
+ int host_status = DID_ERROR;
+
+ switch (sts->completion_status) {
+ case CS_COMPLETE:
+ host_status = DID_OK;
+ break;
+ case CS_INCOMPLETE:
+ if (!(sts->state_flags & SF_GOT_BUS))
+ host_status = DID_NO_CONNECT;
+ else if (!(sts->state_flags & SF_GOT_TARGET))
+ host_status = DID_BAD_TARGET;
+ else if (!(sts->state_flags & SF_SENT_CDB))
+ host_status = DID_ERROR;
+ else if (!(sts->state_flags & SF_TRANSFERRED_DATA))
+ host_status = DID_ERROR;
+ else if (!(sts->state_flags & SF_GOT_STATUS))
+ host_status = DID_ERROR;
+ else if (!(sts->state_flags & SF_GOT_SENSE))
+ host_status = DID_ERROR;
+ break;
+ case CS_DMA_ERROR:
+ case CS_TRANSPORT_ERROR:
+ host_status = DID_ERROR;
+ break;
+ case CS_RESET_OCCURRED:
+ case CS_BUS_RESET:
+ host_status = DID_RESET;
+ break;
+ case CS_ABORTED:
+ host_status = DID_ABORT;
+ break;
+ case CS_TIMEOUT:
+ host_status = DID_TIME_OUT;
+ break;
+ case CS_DATA_OVERRUN:
+ case CS_COMMAND_OVERRUN:
+ case CS_STATUS_OVERRUN:
+ case CS_BAD_MESSAGE:
+ case CS_NO_MESSAGE_OUT:
+ case CS_EXT_ID_FAILED:
+ case CS_IDE_MSG_FAILED:
+ case CS_ABORT_MSG_FAILED:
+ case CS_NOP_MSG_FAILED:
+ case CS_PARITY_ERROR_MSG_FAILED:
+ case CS_DEVICE_RESET_MSG_FAILED:
+ case CS_ID_MSG_FAILED:
+ case CS_UNEXP_BUS_FREE:
+ host_status = DID_ERROR;
+ break;
+ case CS_DATA_UNDERRUN:
+ host_status = DID_OK;
+ break;
+ default:
+ printk(KERN_EMERG "qlogicpti%d: unknown completion status 0x%04x\n",
+ id, sts->completion_status);
+ host_status = DID_ERROR;
+ break;
+ }
+
+ return (sts->scsi_status & STATUS_MASK) | (host_status << 16);
+}
+
+static struct scsi_cmnd *qlogicpti_intr_handler(struct qlogicpti *qpti)
+{
+ struct scsi_cmnd *Cmnd, *done_queue = NULL;
+ struct Status_Entry *sts;
+ u_int in_ptr, out_ptr;
+
+ if (!(sbus_readw(qpti->qregs + SBUS_STAT) & SBUS_STAT_RINT))
+ return NULL;
+
+ in_ptr = sbus_readw(qpti->qregs + MBOX5);
+ sbus_writew(HCCTRL_CRIRQ, qpti->qregs + HCCTRL);
+ if (sbus_readw(qpti->qregs + SBUS_SEMAPHORE) & SBUS_SEMAPHORE_LCK) {
+ switch (sbus_readw(qpti->qregs + MBOX0)) {
+ case ASYNC_SCSI_BUS_RESET:
+ case EXECUTION_TIMEOUT_RESET:
+ qpti->send_marker = 1;
+ break;
+ case INVALID_COMMAND:
+ case HOST_INTERFACE_ERROR:
+ case COMMAND_ERROR:
+ case COMMAND_PARAM_ERROR:
+ break;
+ };
+ sbus_writew(0, qpti->qregs + SBUS_SEMAPHORE);
+ }
+
+ /* This looks like a network driver! */
+ out_ptr = qpti->res_out_ptr;
+ while (out_ptr != in_ptr) {
+ u_int cmd_slot;
+
+ sts = (struct Status_Entry *) &qpti->res_cpu[out_ptr];
+ out_ptr = NEXT_RES_PTR(out_ptr);
+
+ /* We store an index in the handle, not the pointer in
+ * some form. This avoids problems due to the fact
+ * that the handle provided is only 32-bits. -DaveM
+ */
+ cmd_slot = sts->handle;
+ Cmnd = qpti->cmd_slots[cmd_slot];
+ qpti->cmd_slots[cmd_slot] = NULL;
+
+ if (sts->completion_status == CS_RESET_OCCURRED ||
+ sts->completion_status == CS_ABORTED ||
+ (sts->status_flags & STF_BUS_RESET))
+ qpti->send_marker = 1;
+
+ if (sts->state_flags & SF_GOT_SENSE)
+ memcpy(Cmnd->sense_buffer, sts->req_sense_data,
+ SCSI_SENSE_BUFFERSIZE);
+
+ if (sts->hdr.entry_type == ENTRY_STATUS)
+ Cmnd->result =
+ qlogicpti_return_status(sts, qpti->qpti_id);
+ else
+ Cmnd->result = DID_ERROR << 16;
+
+ if (scsi_bufflen(Cmnd))
+ dma_unmap_sg(&qpti->op->dev,
+ scsi_sglist(Cmnd), scsi_sg_count(Cmnd),
+ Cmnd->sc_data_direction);
+
+ qpti->cmd_count[Cmnd->device->id]--;
+ sbus_writew(out_ptr, qpti->qregs + MBOX5);
+ Cmnd->host_scribble = (unsigned char *) done_queue;
+ done_queue = Cmnd;
+ }
+ qpti->res_out_ptr = out_ptr;
+
+ return done_queue;
+}
+
+static irqreturn_t qpti_intr(int irq, void *dev_id)
+{
+ struct qlogicpti *qpti = dev_id;
+ unsigned long flags;
+ struct scsi_cmnd *dq;
+
+ spin_lock_irqsave(qpti->qhost->host_lock, flags);
+ dq = qlogicpti_intr_handler(qpti);
+
+ if (dq != NULL) {
+ do {
+ struct scsi_cmnd *next;
+
+ next = (struct scsi_cmnd *) dq->host_scribble;
+ scsi_done(dq);
+ dq = next;
+ } while (dq != NULL);
+ }
+ spin_unlock_irqrestore(qpti->qhost->host_lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static int qlogicpti_abort(struct scsi_cmnd *Cmnd)
+{
+ u_short param[6];
+ struct Scsi_Host *host = Cmnd->device->host;
+ struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata;
+ int return_status = SUCCESS;
+ u32 cmd_cookie;
+ int i;
+
+ printk(KERN_WARNING "qlogicpti%d: Aborting cmd for tgt[%d] lun[%d]\n",
+ qpti->qpti_id, (int)Cmnd->device->id, (int)Cmnd->device->lun);
+
+ qlogicpti_disable_irqs(qpti);
+
+ /* Find the 32-bit cookie we gave to the firmware for
+ * this command.
+ */
+ for (i = 0; i < QLOGICPTI_REQ_QUEUE_LEN + 1; i++)
+ if (qpti->cmd_slots[i] == Cmnd)
+ break;
+ cmd_cookie = i;
+
+ param[0] = MBOX_ABORT;
+ param[1] = (((u_short) Cmnd->device->id) << 8) | Cmnd->device->lun;
+ param[2] = cmd_cookie >> 16;
+ param[3] = cmd_cookie & 0xffff;
+ if (qlogicpti_mbox_command(qpti, param, 0) ||
+ (param[0] != MBOX_COMMAND_COMPLETE)) {
+ printk(KERN_EMERG "qlogicpti%d: scsi abort failure: %x\n",
+ qpti->qpti_id, param[0]);
+ return_status = FAILED;
+ }
+
+ qlogicpti_enable_irqs(qpti);
+
+ return return_status;
+}
+
+static int qlogicpti_reset(struct scsi_cmnd *Cmnd)
+{
+ u_short param[6];
+ struct Scsi_Host *host = Cmnd->device->host;
+ struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata;
+ int return_status = SUCCESS;
+
+ printk(KERN_WARNING "qlogicpti%d: Resetting SCSI bus!\n",
+ qpti->qpti_id);
+
+ qlogicpti_disable_irqs(qpti);
+
+ param[0] = MBOX_BUS_RESET;
+ param[1] = qpti->host_param.bus_reset_delay;
+ if (qlogicpti_mbox_command(qpti, param, 0) ||
+ (param[0] != MBOX_COMMAND_COMPLETE)) {
+ printk(KERN_EMERG "qlogicisp%d: scsi bus reset failure: %x\n",
+ qpti->qpti_id, param[0]);
+ return_status = FAILED;
+ }
+
+ qlogicpti_enable_irqs(qpti);
+
+ return return_status;
+}
+
+static struct scsi_host_template qpti_template = {
+ .module = THIS_MODULE,
+ .name = "qlogicpti",
+ .info = qlogicpti_info,
+ .queuecommand = qlogicpti_queuecommand,
+ .slave_configure = qlogicpti_slave_configure,
+ .eh_abort_handler = qlogicpti_abort,
+ .eh_host_reset_handler = qlogicpti_reset,
+ .can_queue = QLOGICPTI_REQ_QUEUE_LEN,
+ .this_id = 7,
+ .sg_tablesize = QLOGICPTI_MAX_SG(QLOGICPTI_REQ_QUEUE_LEN),
+};
+
+static const struct of_device_id qpti_match[];
+static int qpti_sbus_probe(struct platform_device *op)
+{
+ struct device_node *dp = op->dev.of_node;
+ struct Scsi_Host *host;
+ struct qlogicpti *qpti;
+ static int nqptis;
+ const char *fcode;
+
+ /* Sometimes Antares cards come up not completely
+ * setup, and we get a report of a zero IRQ.
+ */
+ if (op->archdata.irqs[0] == 0)
+ return -ENODEV;
+
+ host = scsi_host_alloc(&qpti_template, sizeof(struct qlogicpti));
+ if (!host)
+ return -ENOMEM;
+
+ qpti = shost_priv(host);
+
+ host->max_id = MAX_TARGETS;
+ qpti->qhost = host;
+ qpti->op = op;
+ qpti->qpti_id = nqptis;
+ qpti->is_pti = !of_node_name_eq(op->dev.of_node, "QLGC,isp");
+
+ if (qpti_map_regs(qpti) < 0)
+ goto fail_unlink;
+
+ if (qpti_register_irq(qpti) < 0)
+ goto fail_unmap_regs;
+
+ qpti_get_scsi_id(qpti);
+ qpti_get_bursts(qpti);
+ qpti_get_clock(qpti);
+
+ /* Clear out scsi_cmnd array. */
+ memset(qpti->cmd_slots, 0, sizeof(qpti->cmd_slots));
+
+ if (qpti_map_queues(qpti) < 0)
+ goto fail_free_irq;
+
+ /* Load the firmware. */
+ if (qlogicpti_load_firmware(qpti))
+ goto fail_unmap_queues;
+ if (qpti->is_pti) {
+ /* Check the PTI status reg. */
+ if (qlogicpti_verify_tmon(qpti))
+ goto fail_unmap_queues;
+ }
+
+ /* Reset the ISP and init res/req queues. */
+ if (qlogicpti_reset_hardware(host))
+ goto fail_unmap_queues;
+
+ printk("(Firmware v%d.%d.%d)", qpti->fware_majrev,
+ qpti->fware_minrev, qpti->fware_micrev);
+
+ fcode = of_get_property(dp, "isp-fcode", NULL);
+ if (fcode && fcode[0])
+ printk("(FCode %s)", fcode);
+ if (of_find_property(dp, "differential", NULL) != NULL)
+ qpti->differential = 1;
+
+ printk("\nqlogicpti%d: [%s Wide, using %s interface]\n",
+ qpti->qpti_id,
+ (qpti->ultra ? "Ultra" : "Fast"),
+ (qpti->differential ? "differential" : "single ended"));
+
+ if (scsi_add_host(host, &op->dev)) {
+ printk("qlogicpti%d: Failed scsi_add_host\n", qpti->qpti_id);
+ goto fail_unmap_queues;
+ }
+
+ dev_set_drvdata(&op->dev, qpti);
+
+ qpti_chain_add(qpti);
+
+ scsi_scan_host(host);
+ nqptis++;
+
+ return 0;
+
+fail_unmap_queues:
+#define QSIZE(entries) (((entries) + 1) * QUEUE_ENTRY_LEN)
+ dma_free_coherent(&op->dev,
+ QSIZE(RES_QUEUE_LEN),
+ qpti->res_cpu, qpti->res_dvma);
+ dma_free_coherent(&op->dev,
+ QSIZE(QLOGICPTI_REQ_QUEUE_LEN),
+ qpti->req_cpu, qpti->req_dvma);
+#undef QSIZE
+
+fail_free_irq:
+ free_irq(qpti->irq, qpti);
+
+fail_unmap_regs:
+ of_iounmap(&op->resource[0], qpti->qregs,
+ resource_size(&op->resource[0]));
+ if (qpti->is_pti)
+ of_iounmap(&op->resource[0], qpti->sreg,
+ sizeof(unsigned char));
+
+fail_unlink:
+ scsi_host_put(host);
+
+ return -ENODEV;
+}
+
+static int qpti_sbus_remove(struct platform_device *op)
+{
+ struct qlogicpti *qpti = dev_get_drvdata(&op->dev);
+
+ qpti_chain_del(qpti);
+
+ scsi_remove_host(qpti->qhost);
+
+ /* Shut up the card. */
+ sbus_writew(0, qpti->qregs + SBUS_CTRL);
+
+ /* Free IRQ handler and unmap Qlogic,ISP and PTI status regs. */
+ free_irq(qpti->irq, qpti);
+
+#define QSIZE(entries) (((entries) + 1) * QUEUE_ENTRY_LEN)
+ dma_free_coherent(&op->dev,
+ QSIZE(RES_QUEUE_LEN),
+ qpti->res_cpu, qpti->res_dvma);
+ dma_free_coherent(&op->dev,
+ QSIZE(QLOGICPTI_REQ_QUEUE_LEN),
+ qpti->req_cpu, qpti->req_dvma);
+#undef QSIZE
+
+ of_iounmap(&op->resource[0], qpti->qregs,
+ resource_size(&op->resource[0]));
+ if (qpti->is_pti)
+ of_iounmap(&op->resource[0], qpti->sreg, sizeof(unsigned char));
+
+ scsi_host_put(qpti->qhost);
+
+ return 0;
+}
+
+static const struct of_device_id qpti_match[] = {
+ {
+ .name = "ptisp",
+ },
+ {
+ .name = "PTI,ptisp",
+ },
+ {
+ .name = "QLGC,isp",
+ },
+ {
+ .name = "SUNW,isp",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, qpti_match);
+
+static struct platform_driver qpti_sbus_driver = {
+ .driver = {
+ .name = "qpti",
+ .of_match_table = qpti_match,
+ },
+ .probe = qpti_sbus_probe,
+ .remove = qpti_sbus_remove,
+};
+module_platform_driver(qpti_sbus_driver);
+
+MODULE_DESCRIPTION("QlogicISP SBUS driver");
+MODULE_AUTHOR("David S. Miller (davem@davemloft.net)");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("2.1");
+MODULE_FIRMWARE("qlogic/isp1000.bin");