diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/soc/fsl/qe/qe_io.c | 186 |
1 files changed, 186 insertions, 0 deletions
diff --git a/drivers/soc/fsl/qe/qe_io.c b/drivers/soc/fsl/qe/qe_io.c new file mode 100644 index 000000000..a5e2d0e5a --- /dev/null +++ b/drivers/soc/fsl/qe/qe_io.c @@ -0,0 +1,186 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * arch/powerpc/sysdev/qe_lib/qe_io.c + * + * QE Parallel I/O ports configuration routines + * + * Copyright 2006 Freescale Semiconductor, Inc. All rights reserved. + * + * Author: Li Yang <LeoLi@freescale.com> + * Based on code from Shlomi Gridish <gridish@freescale.com> + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/ioport.h> + +#include <asm/io.h> +#include <soc/fsl/qe/qe.h> + +#undef DEBUG + +static struct qe_pio_regs __iomem *par_io; +static int num_par_io_ports = 0; + +int par_io_init(struct device_node *np) +{ + struct resource res; + int ret; + u32 num_ports; + + /* Map Parallel I/O ports registers */ + ret = of_address_to_resource(np, 0, &res); + if (ret) + return ret; + par_io = ioremap(res.start, resource_size(&res)); + if (!par_io) + return -ENOMEM; + + if (!of_property_read_u32(np, "num-ports", &num_ports)) + num_par_io_ports = num_ports; + + return 0; +} + +void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, int dir, + int open_drain, int assignment, int has_irq) +{ + u32 pin_mask1bit; + u32 pin_mask2bits; + u32 new_mask2bits; + u32 tmp_val; + + /* calculate pin location for single and 2 bits information */ + pin_mask1bit = (u32) (1 << (QE_PIO_PINS - (pin + 1))); + + /* Set open drain, if required */ + tmp_val = ioread32be(&par_io->cpodr); + if (open_drain) + iowrite32be(pin_mask1bit | tmp_val, &par_io->cpodr); + else + iowrite32be(~pin_mask1bit & tmp_val, &par_io->cpodr); + + /* define direction */ + tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ? + ioread32be(&par_io->cpdir2) : + ioread32be(&par_io->cpdir1); + + /* get all bits mask for 2 bit per port */ + pin_mask2bits = (u32) (0x3 << (QE_PIO_PINS - + (pin % (QE_PIO_PINS / 2) + 1) * 2)); + + /* Get the final mask we need for the right definition */ + new_mask2bits = (u32) (dir << (QE_PIO_PINS - + (pin % (QE_PIO_PINS / 2) + 1) * 2)); + + /* clear and set 2 bits mask */ + if (pin > (QE_PIO_PINS / 2) - 1) { + iowrite32be(~pin_mask2bits & tmp_val, &par_io->cpdir2); + tmp_val &= ~pin_mask2bits; + iowrite32be(new_mask2bits | tmp_val, &par_io->cpdir2); + } else { + iowrite32be(~pin_mask2bits & tmp_val, &par_io->cpdir1); + tmp_val &= ~pin_mask2bits; + iowrite32be(new_mask2bits | tmp_val, &par_io->cpdir1); + } + /* define pin assignment */ + tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ? + ioread32be(&par_io->cppar2) : + ioread32be(&par_io->cppar1); + + new_mask2bits = (u32) (assignment << (QE_PIO_PINS - + (pin % (QE_PIO_PINS / 2) + 1) * 2)); + /* clear and set 2 bits mask */ + if (pin > (QE_PIO_PINS / 2) - 1) { + iowrite32be(~pin_mask2bits & tmp_val, &par_io->cppar2); + tmp_val &= ~pin_mask2bits; + iowrite32be(new_mask2bits | tmp_val, &par_io->cppar2); + } else { + iowrite32be(~pin_mask2bits & tmp_val, &par_io->cppar1); + tmp_val &= ~pin_mask2bits; + iowrite32be(new_mask2bits | tmp_val, &par_io->cppar1); + } +} +EXPORT_SYMBOL(__par_io_config_pin); + +int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain, + int assignment, int has_irq) +{ + if (!par_io || port >= num_par_io_ports) + return -EINVAL; + + __par_io_config_pin(&par_io[port], pin, dir, open_drain, assignment, + has_irq); + return 0; +} +EXPORT_SYMBOL(par_io_config_pin); + +int par_io_data_set(u8 port, u8 pin, u8 val) +{ + u32 pin_mask, tmp_val; + + if (port >= num_par_io_ports) + return -EINVAL; + if (pin >= QE_PIO_PINS) + return -EINVAL; + /* calculate pin location */ + pin_mask = (u32) (1 << (QE_PIO_PINS - 1 - pin)); + + tmp_val = ioread32be(&par_io[port].cpdata); + + if (val == 0) /* clear */ + iowrite32be(~pin_mask & tmp_val, &par_io[port].cpdata); + else /* set */ + iowrite32be(pin_mask | tmp_val, &par_io[port].cpdata); + + return 0; +} +EXPORT_SYMBOL(par_io_data_set); + +int par_io_of_config(struct device_node *np) +{ + struct device_node *pio; + int pio_map_len; + const __be32 *pio_map; + + if (par_io == NULL) { + printk(KERN_ERR "par_io not initialized\n"); + return -1; + } + + pio = of_parse_phandle(np, "pio-handle", 0); + if (pio == NULL) { + printk(KERN_ERR "pio-handle not available\n"); + return -1; + } + + pio_map = of_get_property(pio, "pio-map", &pio_map_len); + if (pio_map == NULL) { + printk(KERN_ERR "pio-map is not set!\n"); + return -1; + } + pio_map_len /= sizeof(unsigned int); + if ((pio_map_len % 6) != 0) { + printk(KERN_ERR "pio-map format wrong!\n"); + return -1; + } + + while (pio_map_len > 0) { + u8 port = be32_to_cpu(pio_map[0]); + u8 pin = be32_to_cpu(pio_map[1]); + int dir = be32_to_cpu(pio_map[2]); + int open_drain = be32_to_cpu(pio_map[3]); + int assignment = be32_to_cpu(pio_map[4]); + int has_irq = be32_to_cpu(pio_map[5]); + + par_io_config_pin(port, pin, dir, open_drain, + assignment, has_irq); + pio_map += 6; + pio_map_len -= 6; + } + of_node_put(pio); + return 0; +} +EXPORT_SYMBOL(par_io_of_config); |