diff options
Diffstat (limited to 'drivers/target/target_core_fabric_lib.c')
-rw-r--r-- | drivers/target/target_core_fabric_lib.c | 419 |
1 files changed, 419 insertions, 0 deletions
diff --git a/drivers/target/target_core_fabric_lib.c b/drivers/target/target_core_fabric_lib.c new file mode 100644 index 000000000..6600ae44f --- /dev/null +++ b/drivers/target/target_core_fabric_lib.c @@ -0,0 +1,419 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/******************************************************************************* + * Filename: target_core_fabric_lib.c + * + * This file contains generic high level protocol identifier and PR + * handlers for TCM fabric modules + * + * (c) Copyright 2010-2013 Datera, Inc. + * + * Nicholas A. Bellinger <nab@linux-iscsi.org> + * + ******************************************************************************/ + +/* + * See SPC4, section 7.5 "Protocol specific parameters" for details + * on the formats implemented in this file. + */ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/ctype.h> +#include <linux/spinlock.h> +#include <linux/export.h> +#include <asm/unaligned.h> + +#include <scsi/scsi_proto.h> + +#include <target/target_core_base.h> +#include <target/target_core_fabric.h> + +#include "target_core_internal.h" +#include "target_core_pr.h" + + +static int sas_get_pr_transport_id( + struct se_node_acl *nacl, + int *format_code, + unsigned char *buf) +{ + int ret; + + /* Skip over 'naa. prefix */ + ret = hex2bin(&buf[4], &nacl->initiatorname[4], 8); + if (ret) { + pr_debug("%s: invalid hex string\n", __func__); + return ret; + } + + return 24; +} + +static int fc_get_pr_transport_id( + struct se_node_acl *se_nacl, + int *format_code, + unsigned char *buf) +{ + unsigned char *ptr; + int i, ret; + u32 off = 8; + + /* + * We convert the ASCII formatted N Port name into a binary + * encoded TransportID. + */ + ptr = &se_nacl->initiatorname[0]; + for (i = 0; i < 23; ) { + if (!strncmp(&ptr[i], ":", 1)) { + i++; + continue; + } + ret = hex2bin(&buf[off++], &ptr[i], 1); + if (ret < 0) { + pr_debug("%s: invalid hex string\n", __func__); + return ret; + } + i += 2; + } + /* + * The FC Transport ID is a hardcoded 24-byte length + */ + return 24; +} + +static int sbp_get_pr_transport_id( + struct se_node_acl *nacl, + int *format_code, + unsigned char *buf) +{ + int ret; + + ret = hex2bin(&buf[8], nacl->initiatorname, 8); + if (ret) { + pr_debug("%s: invalid hex string\n", __func__); + return ret; + } + + return 24; +} + +static int srp_get_pr_transport_id( + struct se_node_acl *nacl, + int *format_code, + unsigned char *buf) +{ + const char *p; + unsigned len, count, leading_zero_bytes; + int rc; + + p = nacl->initiatorname; + if (strncasecmp(p, "0x", 2) == 0) + p += 2; + len = strlen(p); + if (len % 2) + return -EINVAL; + + count = min(len / 2, 16U); + leading_zero_bytes = 16 - count; + memset(buf + 8, 0, leading_zero_bytes); + rc = hex2bin(buf + 8 + leading_zero_bytes, p, count); + if (rc < 0) { + pr_debug("hex2bin failed for %s: %d\n", p, rc); + return rc; + } + + return 24; +} + +static int iscsi_get_pr_transport_id( + struct se_node_acl *se_nacl, + struct t10_pr_registration *pr_reg, + int *format_code, + unsigned char *buf) +{ + u32 off = 4, padding = 0; + int isid_len; + u16 len = 0; + + spin_lock_irq(&se_nacl->nacl_sess_lock); + /* + * Only null terminate the last field. + * + * From spc4r37 section 7.6.4.6: TransportID for initiator ports using + * SCSI over iSCSI. + * + * Table 507 TPID=0 Initiator device TransportID + * + * The null-terminated, null-padded (see 4.3.2) ISCSI NAME field shall + * contain the iSCSI name of an iSCSI initiator node (see RFC 7143). + * The first ISCSI NAME field byte containing an ASCII null character + * terminates the ISCSI NAME field without regard for the specified + * length of the iSCSI TransportID or the contents of the ADDITIONAL + * LENGTH field. + */ + len = sprintf(&buf[off], "%s", se_nacl->initiatorname); + off += len; + if ((*format_code == 1) && (pr_reg->isid_present_at_reg)) { + /* + * Set FORMAT CODE 01b for iSCSI Initiator port TransportID + * format. + */ + buf[0] |= 0x40; + /* + * From spc4r37 Section 7.6.4.6 + * + * Table 508 TPID=1 Initiator port TransportID. + * + * The ISCSI NAME field shall not be null-terminated + * (see 4.3.2) and shall not be padded. + * + * The SEPARATOR field shall contain the five ASCII + * characters ",i,0x". + * + * The null-terminated, null-padded ISCSI INITIATOR SESSION ID + * field shall contain the iSCSI initiator session identifier + * (see RFC 3720) in the form of ASCII characters that are the + * hexadecimal digits converted from the binary iSCSI initiator + * session identifier value. The first ISCSI INITIATOR SESSION + * ID field byte containing an ASCII null character terminates + * the ISCSI INITIATOR SESSION ID field without regard for the + * specified length of the iSCSI TransportID or the contents + * of the ADDITIONAL LENGTH field. + */ + buf[off++] = 0x2c; /* ASCII Character: "," */ + buf[off++] = 0x69; /* ASCII Character: "i" */ + buf[off++] = 0x2c; /* ASCII Character: "," */ + buf[off++] = 0x30; /* ASCII Character: "0" */ + buf[off++] = 0x78; /* ASCII Character: "x" */ + len += 5; + + isid_len = sprintf(buf + off, "%s", pr_reg->pr_reg_isid); + off += isid_len; + len += isid_len; + } + buf[off] = '\0'; + len += 1; + spin_unlock_irq(&se_nacl->nacl_sess_lock); + /* + * The ADDITIONAL LENGTH field specifies the number of bytes that follow + * in the TransportID. The additional length shall be at least 20 and + * shall be a multiple of four. + */ + padding = ((-len) & 3); + if (padding != 0) + len += padding; + + put_unaligned_be16(len, &buf[2]); + /* + * Increment value for total payload + header length for + * full status descriptor + */ + len += 4; + + return len; +} + +static int iscsi_get_pr_transport_id_len( + struct se_node_acl *se_nacl, + struct t10_pr_registration *pr_reg, + int *format_code) +{ + u32 len = 0, padding = 0; + + spin_lock_irq(&se_nacl->nacl_sess_lock); + len = strlen(se_nacl->initiatorname); + /* + * Add extra byte for NULL terminator + */ + len++; + /* + * If there is ISID present with the registration, use format code: + * 01b: iSCSI Initiator port TransportID format + * + * If there is not an active iSCSI session, use format code: + * 00b: iSCSI Initiator device TransportID format + */ + if (pr_reg->isid_present_at_reg) { + len += 5; /* For ",i,0x" ASCII separator */ + len += strlen(pr_reg->pr_reg_isid); + *format_code = 1; + } else + *format_code = 0; + spin_unlock_irq(&se_nacl->nacl_sess_lock); + /* + * The ADDITIONAL LENGTH field specifies the number of bytes that follow + * in the TransportID. The additional length shall be at least 20 and + * shall be a multiple of four. + */ + padding = ((-len) & 3); + if (padding != 0) + len += padding; + /* + * Increment value for total payload + header length for + * full status descriptor + */ + len += 4; + + return len; +} + +static char *iscsi_parse_pr_out_transport_id( + struct se_portal_group *se_tpg, + char *buf, + u32 *out_tid_len, + char **port_nexus_ptr) +{ + char *p; + int i; + u8 format_code = (buf[0] & 0xc0); + /* + * Check for FORMAT CODE 00b or 01b from spc4r17, section 7.5.4.6: + * + * TransportID for initiator ports using SCSI over iSCSI, + * from Table 388 -- iSCSI TransportID formats. + * + * 00b Initiator port is identified using the world wide unique + * SCSI device name of the iSCSI initiator + * device containing the initiator port (see table 389). + * 01b Initiator port is identified using the world wide unique + * initiator port identifier (see table 390).10b to 11b + * Reserved + */ + if ((format_code != 0x00) && (format_code != 0x40)) { + pr_err("Illegal format code: 0x%02x for iSCSI" + " Initiator Transport ID\n", format_code); + return NULL; + } + /* + * If the caller wants the TransportID Length, we set that value for the + * entire iSCSI Tarnsport ID now. + */ + if (out_tid_len) { + /* The shift works thanks to integer promotion rules */ + *out_tid_len = get_unaligned_be16(&buf[2]); + /* Add four bytes for iSCSI Transport ID header */ + *out_tid_len += 4; + } + + /* + * Check for ',i,0x' separator between iSCSI Name and iSCSI Initiator + * Session ID as defined in Table 390 - iSCSI initiator port TransportID + * format. + */ + if (format_code == 0x40) { + p = strstr(&buf[4], ",i,0x"); + if (!p) { + pr_err("Unable to locate \",i,0x\" separator" + " for Initiator port identifier: %s\n", + &buf[4]); + return NULL; + } + *p = '\0'; /* Terminate iSCSI Name */ + p += 5; /* Skip over ",i,0x" separator */ + + *port_nexus_ptr = p; + /* + * Go ahead and do the lower case conversion of the received + * 12 ASCII characters representing the ISID in the TransportID + * for comparison against the running iSCSI session's ISID from + * iscsi_target.c:lio_sess_get_initiator_sid() + */ + for (i = 0; i < 12; i++) { + /* + * The first ISCSI INITIATOR SESSION ID field byte + * containing an ASCII null character terminates the + * ISCSI INITIATOR SESSION ID field without regard for + * the specified length of the iSCSI TransportID or the + * contents of the ADDITIONAL LENGTH field. + */ + if (*p == '\0') + break; + + if (isdigit(*p)) { + p++; + continue; + } + *p = tolower(*p); + p++; + } + } else + *port_nexus_ptr = NULL; + + return &buf[4]; +} + +int target_get_pr_transport_id_len(struct se_node_acl *nacl, + struct t10_pr_registration *pr_reg, int *format_code) +{ + switch (nacl->se_tpg->proto_id) { + case SCSI_PROTOCOL_FCP: + case SCSI_PROTOCOL_SBP: + case SCSI_PROTOCOL_SRP: + case SCSI_PROTOCOL_SAS: + break; + case SCSI_PROTOCOL_ISCSI: + return iscsi_get_pr_transport_id_len(nacl, pr_reg, format_code); + default: + pr_err("Unknown proto_id: 0x%02x\n", nacl->se_tpg->proto_id); + return -EINVAL; + } + + /* + * Most transports use a fixed length 24 byte identifier. + */ + *format_code = 0; + return 24; +} + +int target_get_pr_transport_id(struct se_node_acl *nacl, + struct t10_pr_registration *pr_reg, int *format_code, + unsigned char *buf) +{ + switch (nacl->se_tpg->proto_id) { + case SCSI_PROTOCOL_SAS: + return sas_get_pr_transport_id(nacl, format_code, buf); + case SCSI_PROTOCOL_SBP: + return sbp_get_pr_transport_id(nacl, format_code, buf); + case SCSI_PROTOCOL_SRP: + return srp_get_pr_transport_id(nacl, format_code, buf); + case SCSI_PROTOCOL_FCP: + return fc_get_pr_transport_id(nacl, format_code, buf); + case SCSI_PROTOCOL_ISCSI: + return iscsi_get_pr_transport_id(nacl, pr_reg, format_code, + buf); + default: + pr_err("Unknown proto_id: 0x%02x\n", nacl->se_tpg->proto_id); + return -EINVAL; + } +} + +const char *target_parse_pr_out_transport_id(struct se_portal_group *tpg, + char *buf, u32 *out_tid_len, char **port_nexus_ptr) +{ + u32 offset; + + switch (tpg->proto_id) { + case SCSI_PROTOCOL_SAS: + /* + * Assume the FORMAT CODE 00b from spc4r17, 7.5.4.7 TransportID + * for initiator ports using SCSI over SAS Serial SCSI Protocol. + */ + offset = 4; + break; + case SCSI_PROTOCOL_SBP: + case SCSI_PROTOCOL_SRP: + case SCSI_PROTOCOL_FCP: + offset = 8; + break; + case SCSI_PROTOCOL_ISCSI: + return iscsi_parse_pr_out_transport_id(tpg, buf, out_tid_len, + port_nexus_ptr); + default: + pr_err("Unknown proto_id: 0x%02x\n", tpg->proto_id); + return NULL; + } + + *port_nexus_ptr = NULL; + *out_tid_len = 24; + return buf + offset; +} |