diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/thermal/qcom/Kconfig | 43 | ||||
| -rw-r--r-- | drivers/thermal/qcom/Makefile | 8 | ||||
| -rw-r--r-- | drivers/thermal/qcom/lmh.c | 241 | ||||
| -rw-r--r-- | drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 1081 | ||||
| -rw-r--r-- | drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 494 | ||||
| -rw-r--r-- | drivers/thermal/qcom/tsens-8960.c | 282 | ||||
| -rw-r--r-- | drivers/thermal/qcom/tsens-v0_1.c | 648 | ||||
| -rw-r--r-- | drivers/thermal/qcom/tsens-v1.c | 389 | ||||
| -rw-r--r-- | drivers/thermal/qcom/tsens-v2.c | 110 | ||||
| -rw-r--r-- | drivers/thermal/qcom/tsens.c | 1187 | ||||
| -rw-r--r-- | drivers/thermal/qcom/tsens.h | 596 |
11 files changed, 5079 insertions, 0 deletions
diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig new file mode 100644 index 000000000..2c7f3f9a2 --- /dev/null +++ b/drivers/thermal/qcom/Kconfig @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0-only +config QCOM_TSENS + tristate "Qualcomm TSENS Temperature Alarm" + depends on NVMEM_QCOM_QFPROM + depends on ARCH_QCOM || COMPILE_TEST + help + This enables the thermal sysfs driver for the TSENS device. It shows + up in Sysfs as a thermal zone with multiple trip points. Disabling the + thermal zone device via the mode file results in disabling the sensor. + Also able to set threshold temperature for both hot and cold and update + when a threshold is reached. + +config QCOM_SPMI_ADC_TM5 + tristate "Qualcomm SPMI PMIC Thermal Monitor ADC5" + depends on OF && SPMI && IIO + select REGMAP_SPMI + select QCOM_VADC_COMMON + help + This enables the thermal driver for the ADC thermal monitoring + device. It shows up as a thermal zone with multiple trip points. + Thermal client sets threshold temperature for both warm and cool and + gets updated when a threshold is reached. + +config QCOM_SPMI_TEMP_ALARM + tristate "Qualcomm SPMI PMIC Temperature Alarm" + depends on OF && SPMI && IIO + select REGMAP_SPMI + help + This enables a thermal sysfs driver for Qualcomm plug-and-play (QPNP) + PMIC devices. It shows up in sysfs as a thermal sensor with multiple + trip points. The temperature reported by the thermal sensor reflects the + real time die temperature if an ADC is present or an estimate of the + temperature based upon the over temperature stage value. + +config QCOM_LMH + tristate "Qualcomm Limits Management Hardware" + depends on ARCH_QCOM && QCOM_SCM + help + This enables initialization of Qualcomm limits management + hardware(LMh). LMh allows for hardware-enforced mitigation for cpus based on + input from temperature and current sensors. On many newer Qualcomm SoCs + LMh is configured in the firmware and this feature need not be enabled. + However, on certain SoCs like sdm845 LMh has to be configured from kernel. diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile new file mode 100644 index 000000000..0fa251204 --- /dev/null +++ b/drivers/thermal/qcom/Makefile @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o + +qcom_tsens-y += tsens.o tsens-v2.o tsens-v1.o tsens-v0_1.o \ + tsens-8960.o +obj-$(CONFIG_QCOM_SPMI_ADC_TM5) += qcom-spmi-adc-tm5.o +obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM) += qcom-spmi-temp-alarm.o +obj-$(CONFIG_QCOM_LMH) += lmh.o diff --git a/drivers/thermal/qcom/lmh.c b/drivers/thermal/qcom/lmh.c new file mode 100644 index 000000000..4122a51e9 --- /dev/null +++ b/drivers/thermal/qcom/lmh.c @@ -0,0 +1,241 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/* + * Copyright (C) 2021, Linaro Limited. All rights reserved. + */ +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/irqdomain.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/of_platform.h> +#include <linux/slab.h> +#include <linux/qcom_scm.h> + +#define LMH_NODE_DCVS 0x44435653 +#define LMH_CLUSTER0_NODE_ID 0x6370302D +#define LMH_CLUSTER1_NODE_ID 0x6370312D + +#define LMH_SUB_FN_THERMAL 0x54484D4C +#define LMH_SUB_FN_CRNT 0x43524E54 +#define LMH_SUB_FN_REL 0x52454C00 +#define LMH_SUB_FN_BCL 0x42434C00 + +#define LMH_ALGO_MODE_ENABLE 0x454E424C +#define LMH_TH_HI_THRESHOLD 0x48494748 +#define LMH_TH_LOW_THRESHOLD 0x4C4F5700 +#define LMH_TH_ARM_THRESHOLD 0x41524D00 + +#define LMH_REG_DCVS_INTR_CLR 0x8 + +#define LMH_ENABLE_ALGOS 1 + +struct lmh_hw_data { + void __iomem *base; + struct irq_domain *domain; + int irq; +}; + +static irqreturn_t lmh_handle_irq(int hw_irq, void *data) +{ + struct lmh_hw_data *lmh_data = data; + int irq = irq_find_mapping(lmh_data->domain, 0); + + /* Call the cpufreq driver to handle the interrupt */ + if (irq) + generic_handle_irq(irq); + + return IRQ_HANDLED; +} + +static void lmh_enable_interrupt(struct irq_data *d) +{ + struct lmh_hw_data *lmh_data = irq_data_get_irq_chip_data(d); + + /* Clear the existing interrupt */ + writel(0xff, lmh_data->base + LMH_REG_DCVS_INTR_CLR); + enable_irq(lmh_data->irq); +} + +static void lmh_disable_interrupt(struct irq_data *d) +{ + struct lmh_hw_data *lmh_data = irq_data_get_irq_chip_data(d); + + disable_irq_nosync(lmh_data->irq); +} + +static struct irq_chip lmh_irq_chip = { + .name = "lmh", + .irq_enable = lmh_enable_interrupt, + .irq_disable = lmh_disable_interrupt +}; + +static int lmh_irq_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) +{ + struct lmh_hw_data *lmh_data = d->host_data; + + irq_set_chip_and_handler(irq, &lmh_irq_chip, handle_simple_irq); + irq_set_chip_data(irq, lmh_data); + + return 0; +} + +static const struct irq_domain_ops lmh_irq_ops = { + .map = lmh_irq_map, + .xlate = irq_domain_xlate_onecell, +}; + +static int lmh_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct device_node *cpu_node; + struct lmh_hw_data *lmh_data; + int temp_low, temp_high, temp_arm, cpu_id, ret; + unsigned int enable_alg; + u32 node_id; + + lmh_data = devm_kzalloc(dev, sizeof(*lmh_data), GFP_KERNEL); + if (!lmh_data) + return -ENOMEM; + + lmh_data->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(lmh_data->base)) + return PTR_ERR(lmh_data->base); + + cpu_node = of_parse_phandle(np, "cpus", 0); + if (!cpu_node) + return -EINVAL; + cpu_id = of_cpu_node_to_id(cpu_node); + of_node_put(cpu_node); + + ret = of_property_read_u32(np, "qcom,lmh-temp-high-millicelsius", &temp_high); + if (ret) { + dev_err(dev, "missing qcom,lmh-temp-high-millicelsius property\n"); + return ret; + } + + ret = of_property_read_u32(np, "qcom,lmh-temp-low-millicelsius", &temp_low); + if (ret) { + dev_err(dev, "missing qcom,lmh-temp-low-millicelsius property\n"); + return ret; + } + + ret = of_property_read_u32(np, "qcom,lmh-temp-arm-millicelsius", &temp_arm); + if (ret) { + dev_err(dev, "missing qcom,lmh-temp-arm-millicelsius property\n"); + return ret; + } + + /* + * Only sdm845 has lmh hardware currently enabled from hlos. If this is needed + * for other platforms, revisit this to check if the <cpu-id, node-id> should be part + * of a dt match table. + */ + if (cpu_id == 0) { + node_id = LMH_CLUSTER0_NODE_ID; + } else if (cpu_id == 4) { + node_id = LMH_CLUSTER1_NODE_ID; + } else { + dev_err(dev, "Wrong CPU id associated with LMh node\n"); + return -EINVAL; + } + + if (!qcom_scm_lmh_dcvsh_available()) + return -EINVAL; + + enable_alg = (uintptr_t)of_device_get_match_data(dev); + + if (enable_alg) { + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1, + LMH_NODE_DCVS, node_id, 0); + if (ret) + dev_err(dev, "Error %d enabling current subfunction\n", ret); + + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_REL, LMH_ALGO_MODE_ENABLE, 1, + LMH_NODE_DCVS, node_id, 0); + if (ret) + dev_err(dev, "Error %d enabling reliability subfunction\n", ret); + + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_BCL, LMH_ALGO_MODE_ENABLE, 1, + LMH_NODE_DCVS, node_id, 0); + if (ret) + dev_err(dev, "Error %d enabling BCL subfunction\n", ret); + + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_ALGO_MODE_ENABLE, 1, + LMH_NODE_DCVS, node_id, 0); + if (ret) { + dev_err(dev, "Error %d enabling thermal subfunction\n", ret); + return ret; + } + + ret = qcom_scm_lmh_profile_change(0x1); + if (ret) { + dev_err(dev, "Error %d changing profile\n", ret); + return ret; + } + } + + /* Set default thermal trips */ + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_ARM_THRESHOLD, temp_arm, + LMH_NODE_DCVS, node_id, 0); + if (ret) { + dev_err(dev, "Error setting thermal ARM threshold%d\n", ret); + return ret; + } + + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_HI_THRESHOLD, temp_high, + LMH_NODE_DCVS, node_id, 0); + if (ret) { + dev_err(dev, "Error setting thermal HI threshold%d\n", ret); + return ret; + } + + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_LOW_THRESHOLD, temp_low, + LMH_NODE_DCVS, node_id, 0); + if (ret) { + dev_err(dev, "Error setting thermal ARM threshold%d\n", ret); + return ret; + } + + lmh_data->irq = platform_get_irq(pdev, 0); + lmh_data->domain = irq_domain_add_linear(np, 1, &lmh_irq_ops, lmh_data); + if (!lmh_data->domain) { + dev_err(dev, "Error adding irq_domain\n"); + return -EINVAL; + } + + /* Disable the irq and let cpufreq enable it when ready to handle the interrupt */ + irq_set_status_flags(lmh_data->irq, IRQ_NOAUTOEN); + ret = devm_request_irq(dev, lmh_data->irq, lmh_handle_irq, + IRQF_ONESHOT | IRQF_NO_SUSPEND, + "lmh-irq", lmh_data); + if (ret) { + dev_err(dev, "Error %d registering irq %x\n", ret, lmh_data->irq); + irq_domain_remove(lmh_data->domain); + return ret; + } + + return 0; +} + +static const struct of_device_id lmh_table[] = { + { .compatible = "qcom,sc8180x-lmh", }, + { .compatible = "qcom,sdm845-lmh", .data = (void *)LMH_ENABLE_ALGOS}, + { .compatible = "qcom,sm8150-lmh", }, + {} +}; +MODULE_DEVICE_TABLE(of, lmh_table); + +static struct platform_driver lmh_driver = { + .probe = lmh_probe, + .driver = { + .name = "qcom-lmh", + .of_match_table = lmh_table, + .suppress_bind_attrs = true, + }, +}; +module_platform_driver(lmh_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("QCOM LMh driver"); diff --git a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c new file mode 100644 index 000000000..1b2c43eab --- /dev/null +++ b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c @@ -0,0 +1,1081 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2020 Linaro Limited + * + * Based on original driver: + * Copyright (c) 2012-2020, The Linux Foundation. All rights reserved. + * + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <linux/bitfield.h> +#include <linux/iio/adc/qcom-vadc-common.h> +#include <linux/iio/consumer.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/thermal.h> +#include <asm-generic/unaligned.h> + +#include "../thermal_hwmon.h" + +/* + * Thermal monitoring block consists of 8 (ADC_TM5_NUM_CHANNELS) channels. Each + * channel is programmed to use one of ADC channels for voltage comparison. + * Voltages are programmed using ADC codes, so we have to convert temp to + * voltage and then to ADC code value. + * + * Configuration of TM channels must match configuration of corresponding ADC + * channels. + */ + +#define ADC5_MAX_CHANNEL 0xc0 +#define ADC_TM5_NUM_CHANNELS 8 + +#define ADC_TM5_STATUS_LOW 0x0a + +#define ADC_TM5_STATUS_HIGH 0x0b + +#define ADC_TM5_NUM_BTM 0x0f + +#define ADC_TM5_ADC_DIG_PARAM 0x42 + +#define ADC_TM5_FAST_AVG_CTL (ADC_TM5_ADC_DIG_PARAM + 1) +#define ADC_TM5_FAST_AVG_EN BIT(7) + +#define ADC_TM5_MEAS_INTERVAL_CTL (ADC_TM5_ADC_DIG_PARAM + 2) +#define ADC_TM5_TIMER1 3 /* 3.9ms */ + +#define ADC_TM5_MEAS_INTERVAL_CTL2 (ADC_TM5_ADC_DIG_PARAM + 3) +#define ADC_TM5_MEAS_INTERVAL_CTL2_MASK 0xf0 +#define ADC_TM5_TIMER2 10 /* 1 second */ +#define ADC_TM5_MEAS_INTERVAL_CTL3_MASK 0xf +#define ADC_TM5_TIMER3 4 /* 4 second */ + +#define ADC_TM_EN_CTL1 0x46 +#define ADC_TM_EN BIT(7) +#define ADC_TM_CONV_REQ 0x47 +#define ADC_TM_CONV_REQ_EN BIT(7) + +#define ADC_TM5_M_CHAN_BASE 0x60 + +#define ADC_TM5_M_ADC_CH_SEL_CTL(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 0) +#define ADC_TM5_M_LOW_THR0(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 1) +#define ADC_TM5_M_LOW_THR1(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 2) +#define ADC_TM5_M_HIGH_THR0(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 3) +#define ADC_TM5_M_HIGH_THR1(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 4) +#define ADC_TM5_M_MEAS_INTERVAL_CTL(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 5) +#define ADC_TM5_M_CTL(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 6) +#define ADC_TM5_M_CTL_HW_SETTLE_DELAY_MASK 0xf +#define ADC_TM5_M_CTL_CAL_SEL_MASK 0x30 +#define ADC_TM5_M_CTL_CAL_VAL 0x40 +#define ADC_TM5_M_EN(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 7) +#define ADC_TM5_M_MEAS_EN BIT(7) +#define ADC_TM5_M_HIGH_THR_INT_EN BIT(1) +#define ADC_TM5_M_LOW_THR_INT_EN BIT(0) + +#define ADC_TM_GEN2_STATUS1 0x08 +#define ADC_TM_GEN2_STATUS_LOW_SET 0x09 +#define ADC_TM_GEN2_STATUS_LOW_CLR 0x0a +#define ADC_TM_GEN2_STATUS_HIGH_SET 0x0b +#define ADC_TM_GEN2_STATUS_HIGH_CLR 0x0c + +#define ADC_TM_GEN2_CFG_HS_SET 0x0d +#define ADC_TM_GEN2_CFG_HS_FLAG BIT(0) +#define ADC_TM_GEN2_CFG_HS_CLR 0x0e + +#define ADC_TM_GEN2_SID 0x40 + +#define ADC_TM_GEN2_CH_CTL 0x41 +#define ADC_TM_GEN2_TM_CH_SEL GENMASK(7, 5) +#define ADC_TM_GEN2_MEAS_INT_SEL GENMASK(3, 2) + +#define ADC_TM_GEN2_ADC_DIG_PARAM 0x42 +#define ADC_TM_GEN2_CTL_CAL_SEL GENMASK(5, 4) +#define ADC_TM_GEN2_CTL_DEC_RATIO_MASK GENMASK(3, 2) + +#define ADC_TM_GEN2_FAST_AVG_CTL 0x43 +#define ADC_TM_GEN2_FAST_AVG_EN BIT(7) + +#define ADC_TM_GEN2_ADC_CH_SEL_CTL 0x44 + +#define ADC_TM_GEN2_DELAY_CTL 0x45 +#define ADC_TM_GEN2_HW_SETTLE_DELAY GENMASK(3, 0) + +#define ADC_TM_GEN2_EN_CTL1 0x46 +#define ADC_TM_GEN2_EN BIT(7) + +#define ADC_TM_GEN2_CONV_REQ 0x47 +#define ADC_TM_GEN2_CONV_REQ_EN BIT(7) + +#define ADC_TM_GEN2_LOW_THR0 0x49 +#define ADC_TM_GEN2_LOW_THR1 0x4a +#define ADC_TM_GEN2_HIGH_THR0 0x4b +#define ADC_TM_GEN2_HIGH_THR1 0x4c +#define ADC_TM_GEN2_LOWER_MASK(n) ((n) & GENMASK(7, 0)) +#define ADC_TM_GEN2_UPPER_MASK(n) (((n) & GENMASK(15, 8)) >> 8) + +#define ADC_TM_GEN2_MEAS_IRQ_EN 0x4d +#define ADC_TM_GEN2_MEAS_EN BIT(7) +#define ADC_TM5_GEN2_HIGH_THR_INT_EN BIT(1) +#define ADC_TM5_GEN2_LOW_THR_INT_EN BIT(0) + +#define ADC_TM_GEN2_MEAS_INT_LSB 0x50 +#define ADC_TM_GEN2_MEAS_INT_MSB 0x51 +#define ADC_TM_GEN2_MEAS_INT_MODE 0x52 + +#define ADC_TM_GEN2_Mn_DATA0(n) ((n * 2) + 0xa0) +#define ADC_TM_GEN2_Mn_DATA1(n) ((n * 2) + 0xa1) +#define ADC_TM_GEN2_DATA_SHIFT 8 + +enum adc5_timer_select { + ADC5_TIMER_SEL_1 = 0, + ADC5_TIMER_SEL_2, + ADC5_TIMER_SEL_3, + ADC5_TIMER_SEL_NONE, +}; + +enum adc5_gen { + ADC_TM5, + ADC_TM_HC, + ADC_TM5_GEN2, + ADC_TM5_MAX +}; + +enum adc_tm5_cal_method { + ADC_TM5_NO_CAL = 0, + ADC_TM5_RATIOMETRIC_CAL, + ADC_TM5_ABSOLUTE_CAL +}; + +enum adc_tm_gen2_time_select { + MEAS_INT_50MS = 0, + MEAS_INT_100MS, + MEAS_INT_1S, + MEAS_INT_SET, + MEAS_INT_NONE, +}; + +struct adc_tm5_chip; +struct adc_tm5_channel; + +struct adc_tm5_data { + const u32 full_scale_code_volt; + unsigned int *decimation; + unsigned int *hw_settle; + int (*disable_channel)(struct adc_tm5_channel *channel); + int (*configure)(struct adc_tm5_channel *channel, int low, int high); + irqreturn_t (*isr)(int irq, void *data); + int (*init)(struct adc_tm5_chip *chip); + char *irq_name; + int gen; +}; + +/** + * struct adc_tm5_channel - ADC Thermal Monitoring channel data. + * @channel: channel number. + * @adc_channel: corresponding ADC channel number. + * @cal_method: calibration method. + * @prescale: channel scaling performed on the input signal. + * @hw_settle_time: the time between AMUX being configured and the + * start of conversion. + * @decimation: sampling rate supported for the channel. + * @avg_samples: ability to provide single result from the ADC + * that is an average of multiple measurements. + * @high_thr_en: channel upper voltage threshold enable state. + * @low_thr_en: channel lower voltage threshold enable state. + * @meas_en: recurring measurement enable state + * @iio: IIO channel instance used by this channel. + * @chip: ADC TM chip instance. + * @tzd: thermal zone device used by this channel. + */ +struct adc_tm5_channel { + unsigned int channel; + unsigned int adc_channel; + enum adc_tm5_cal_method cal_method; + unsigned int prescale; + unsigned int hw_settle_time; + unsigned int decimation; /* For Gen2 ADC_TM */ + unsigned int avg_samples; /* For Gen2 ADC_TM */ + bool high_thr_en; /* For Gen2 ADC_TM */ + bool low_thr_en; /* For Gen2 ADC_TM */ + bool meas_en; /* For Gen2 ADC_TM */ + struct iio_channel *iio; + struct adc_tm5_chip *chip; + struct thermal_zone_device *tzd; +}; + +/** + * struct adc_tm5_chip - ADC Thermal Monitoring properties + * @regmap: SPMI ADC5 Thermal Monitoring peripheral register map field. + * @dev: SPMI ADC5 device. + * @data: software configuration data. + * @channels: array of ADC TM channel data. + * @nchannels: amount of channels defined/allocated + * @decimation: sampling rate supported for the channel. + * Applies to all channels, used only on Gen1 ADC_TM. + * @avg_samples: ability to provide single result from the ADC + * that is an average of multiple measurements. Applies to all + * channels, used only on Gen1 ADC_TM. + * @base: base address of TM registers. + * @adc_mutex_lock: ADC_TM mutex lock, used only on Gen2 ADC_TM. + * It is used to ensure only one ADC channel configuration + * is done at a time using the shared set of configuration + * registers. + */ +struct adc_tm5_chip { + struct regmap *regmap; + struct device *dev; + const struct adc_tm5_data *data; + struct adc_tm5_channel *channels; + unsigned int nchannels; + unsigned int decimation; + unsigned int avg_samples; + u16 base; + struct mutex adc_mutex_lock; +}; + +static int adc_tm5_read(struct adc_tm5_chip *adc_tm, u16 offset, u8 *data, int len) +{ + return regmap_bulk_read(adc_tm->regmap, adc_tm->base + offset, data, len); +} + +static int adc_tm5_write(struct adc_tm5_chip *adc_tm, u16 offset, u8 *data, int len) +{ + return regmap_bulk_write(adc_tm->regmap, adc_tm->base + offset, data, len); +} + +static int adc_tm5_reg_update(struct adc_tm5_chip *adc_tm, u16 offset, u8 mask, u8 val) +{ + return regmap_write_bits(adc_tm->regmap, adc_tm->base + offset, mask, val); +} + +static irqreturn_t adc_tm5_isr(int irq, void *data) +{ + struct adc_tm5_chip *chip = data; + u8 status_low, status_high, ctl; + int ret, i; + + ret = adc_tm5_read(chip, ADC_TM5_STATUS_LOW, &status_low, sizeof(status_low)); + if (unlikely(ret)) { + dev_err(chip->dev, "read status low failed: %d\n", ret); + return IRQ_HANDLED; + } + + ret = adc_tm5_read(chip, ADC_TM5_STATUS_HIGH, &status_high, sizeof(status_high)); + if (unlikely(ret)) { + dev_err(chip->dev, "read status high failed: %d\n", ret); + return IRQ_HANDLED; + } + + for (i = 0; i < chip->nchannels; i++) { + bool upper_set = false, lower_set = false; + unsigned int ch = chip->channels[i].channel; + + /* No TZD, we warned at the boot time */ + if (!chip->channels[i].tzd) + continue; + + ret = adc_tm5_read(chip, ADC_TM5_M_EN(ch), &ctl, sizeof(ctl)); + if (unlikely(ret)) { + dev_err(chip->dev, "ctl read failed: %d, channel %d\n", ret, i); + continue; + } + + if (!(ctl & ADC_TM5_M_MEAS_EN)) + continue; + + lower_set = (status_low & BIT(ch)) && + (ctl & ADC_TM5_M_LOW_THR_INT_EN); + + upper_set = (status_high & BIT(ch)) && + (ctl & ADC_TM5_M_HIGH_THR_INT_EN); + + if (upper_set || lower_set) + thermal_zone_device_update(chip->channels[i].tzd, + THERMAL_EVENT_UNSPECIFIED); + } + + return IRQ_HANDLED; +} + +static irqreturn_t adc_tm5_gen2_isr(int irq, void *data) +{ + struct adc_tm5_chip *chip = data; + u8 status_low, status_high; + int ret, i; + + ret = adc_tm5_read(chip, ADC_TM_GEN2_STATUS_LOW_CLR, &status_low, sizeof(status_low)); + if (ret) { + dev_err(chip->dev, "read status_low failed: %d\n", ret); + return IRQ_HANDLED; + } + + ret = adc_tm5_read(chip, ADC_TM_GEN2_STATUS_HIGH_CLR, &status_high, sizeof(status_high)); + if (ret) { + dev_err(chip->dev, "read status_high failed: %d\n", ret); + return IRQ_HANDLED; + } + + ret = adc_tm5_write(chip, ADC_TM_GEN2_STATUS_LOW_CLR, &status_low, sizeof(status_low)); + if (ret < 0) { + dev_err(chip->dev, "clear status low failed with %d\n", ret); + return IRQ_HANDLED; + } + + ret = adc_tm5_write(chip, ADC_TM_GEN2_STATUS_HIGH_CLR, &status_high, sizeof(status_high)); + if (ret < 0) { + dev_err(chip->dev, "clear status high failed with %d\n", ret); + return IRQ_HANDLED; + } + + for (i = 0; i < chip->nchannels; i++) { + bool upper_set = false, lower_set = false; + unsigned int ch = chip->channels[i].channel; + + /* No TZD, we warned at the boot time */ + if (!chip->channels[i].tzd) + continue; + + if (!chip->channels[i].meas_en) + continue; + + lower_set = (status_low & BIT(ch)) && + (chip->channels[i].low_thr_en); + + upper_set = (status_high & BIT(ch)) && + (chip->channels[i].high_thr_en); + + if (upper_set || lower_set) + thermal_zone_device_update(chip->channels[i].tzd, + THERMAL_EVENT_UNSPECIFIED); + } + + return IRQ_HANDLED; +} + +static int adc_tm5_get_temp(struct thermal_zone_device *tz, int *temp) +{ + struct adc_tm5_channel *channel = tz->devdata; + int ret; + + if (!channel || !channel->iio) + return -EINVAL; + + ret = iio_read_channel_processed(channel->iio, temp); + if (ret < 0) + return ret; + + if (ret != IIO_VAL_INT) + return -EINVAL; + + return 0; +} + +static int adc_tm5_disable_channel(struct adc_tm5_channel *channel) +{ + struct adc_tm5_chip *chip = channel->chip; + unsigned int reg = ADC_TM5_M_EN(channel->channel); + + return adc_tm5_reg_update(chip, reg, + ADC_TM5_M_MEAS_EN | + ADC_TM5_M_HIGH_THR_INT_EN | + ADC_TM5_M_LOW_THR_INT_EN, + 0); +} + +#define ADC_TM_GEN2_POLL_DELAY_MIN_US 100 +#define ADC_TM_GEN2_POLL_DELAY_MAX_US 110 +#define ADC_TM_GEN2_POLL_RETRY_COUNT 3 + +static int32_t adc_tm5_gen2_conv_req(struct adc_tm5_chip *chip) +{ + int ret; + u8 data; + unsigned int count; + + data = ADC_TM_GEN2_EN; + ret = adc_tm5_write(chip, ADC_TM_GEN2_EN_CTL1, &data, 1); + if (ret < 0) { + dev_err(chip->dev, "adc-tm enable failed with %d\n", ret); + return ret; + } + + data = ADC_TM_GEN2_CFG_HS_FLAG; + ret = adc_tm5_write(chip, ADC_TM_GEN2_CFG_HS_SET, &data, 1); + if (ret < 0) { + dev_err(chip->dev, "adc-tm handshake failed with %d\n", ret); + return ret; + } + + data = ADC_TM_GEN2_CONV_REQ_EN; + ret = adc_tm5_write(chip, ADC_TM_GEN2_CONV_REQ, &data, 1); + if (ret < 0) { + dev_err(chip->dev, "adc-tm request conversion failed with %d\n", ret); + return ret; + } + + /* + * SW sets a handshake bit and waits for PBS to clear it + * before the next conversion request can be queued. + */ + + for (count = 0; count < ADC_TM_GEN2_POLL_RETRY_COUNT; count++) { + ret = adc_tm5_read(chip, ADC_TM_GEN2_CFG_HS_SET, &data, sizeof(data)); + if (ret < 0) { + dev_err(chip->dev, "adc-tm read failed with %d\n", ret); + return ret; + } + + if (!(data & ADC_TM_GEN2_CFG_HS_FLAG)) + return ret; + usleep_range(ADC_TM_GEN2_POLL_DELAY_MIN_US, + ADC_TM_GEN2_POLL_DELAY_MAX_US); + } + + dev_err(chip->dev, "adc-tm conversion request handshake timed out\n"); + + return -ETIMEDOUT; +} + +static int adc_tm5_gen2_disable_channel(struct adc_tm5_channel *channel) +{ + struct adc_tm5_chip *chip = channel->chip; + int ret; + u8 val; + + mutex_lock(&chip->adc_mutex_lock); + + channel->meas_en = false; + channel->high_thr_en = false; + channel->low_thr_en = false; + + ret = adc_tm5_read(chip, ADC_TM_GEN2_CH_CTL, &val, sizeof(val)); + if (ret < 0) { + dev_err(chip->dev, "adc-tm block read failed with %d\n", ret); + goto disable_fail; + } + + val &= ~ADC_TM_GEN2_TM_CH_SEL; + val |= FIELD_PREP(ADC_TM_GEN2_TM_CH_SEL, channel->channel); + + ret = adc_tm5_write(chip, ADC_TM_GEN2_CH_CTL, &val, 1); + if (ret < 0) { + dev_err(chip->dev, "adc-tm channel disable failed with %d\n", ret); + goto disable_fail; + } + + val = 0; + ret = adc_tm5_write(chip, ADC_TM_GEN2_MEAS_IRQ_EN, &val, 1); + if (ret < 0) { + dev_err(chip->dev, "adc-tm interrupt disable failed with %d\n", ret); + goto disable_fail; + } + + + ret = adc_tm5_gen2_conv_req(channel->chip); + if (ret < 0) + dev_err(chip->dev, "adc-tm channel configure failed with %d\n", ret); + +disable_fail: + mutex_unlock(&chip->adc_mutex_lock); + return ret; +} + +static int adc_tm5_enable(struct adc_tm5_chip *chip) +{ + int ret; + u8 data; + + data = ADC_TM_EN; + ret = adc_tm5_write(chip, ADC_TM_EN_CTL1, &data, sizeof(data)); + if (ret < 0) { + dev_err(chip->dev, "adc-tm enable failed\n"); + return ret; + } + + data = ADC_TM_CONV_REQ_EN; + ret = adc_tm5_write(chip, ADC_TM_CONV_REQ, &data, sizeof(data)); + if (ret < 0) { + dev_err(chip->dev, "adc-tm request conversion failed\n"); + return ret; + } + + return 0; +} + +static int adc_tm5_configure(struct adc_tm5_channel *channel, int low, int high) +{ + struct adc_tm5_chip *chip = channel->chip; + u8 buf[8]; + u16 reg = ADC_TM5_M_ADC_CH_SEL_CTL(channel->channel); + int ret; + + ret = adc_tm5_read(chip, reg, buf, sizeof(buf)); + if (ret) { + dev_err(chip->dev, "channel %d params read failed: %d\n", channel->channel, ret); + return ret; + } + + buf[0] = channel->adc_channel; + + /* High temperature corresponds to low voltage threshold */ + if (high != INT_MAX) { + u16 adc_code = qcom_adc_tm5_temp_volt_scale(channel->prescale, + chip->data->full_scale_code_volt, high); + + put_unaligned_le16(adc_code, &buf[1]); + buf[7] |= ADC_TM5_M_LOW_THR_INT_EN; + } else { + buf[7] &= ~ADC_TM5_M_LOW_THR_INT_EN; + } + + /* Low temperature corresponds to high voltage threshold */ + if (low != -INT_MAX) { + u16 adc_code = qcom_adc_tm5_temp_volt_scale(channel->prescale, + chip->data->full_scale_code_volt, low); + + put_unaligned_le16(adc_code, &buf[3]); + buf[7] |= ADC_TM5_M_HIGH_THR_INT_EN; + } else { + buf[7] &= ~ADC_TM5_M_HIGH_THR_INT_EN; + } + + buf[5] = ADC5_TIMER_SEL_2; + + /* Set calibration select, hw_settle delay */ + buf[6] &= ~ADC_TM5_M_CTL_HW_SETTLE_DELAY_MASK; + buf[6] |= FIELD_PREP(ADC_TM5_M_CTL_HW_SETTLE_DELAY_MASK, channel->hw_settle_time); + buf[6] &= ~ADC_TM5_M_CTL_CAL_SEL_MASK; + buf[6] |= FIELD_PREP(ADC_TM5_M_CTL_CAL_SEL_MASK, channel->cal_method); + + buf[7] |= ADC_TM5_M_MEAS_EN; + + ret = adc_tm5_write(chip, reg, buf, sizeof(buf)); + if (ret) { + dev_err(chip->dev, "channel %d params write failed: %d\n", channel->channel, ret); + return ret; + } + + return adc_tm5_enable(chip); +} + +static int adc_tm5_gen2_configure(struct adc_tm5_channel *channel, int low, int high) +{ + struct adc_tm5_chip *chip = channel->chip; + int ret; + u8 buf[14]; + u16 adc_code; + + mutex_lock(&chip->adc_mutex_lock); + + channel->meas_en = true; + + ret = adc_tm5_read(chip, ADC_TM_GEN2_SID, buf, sizeof(buf)); + if (ret < 0) { + dev_err(chip->dev, "adc-tm block read failed with %d\n", ret); + goto config_fail; + } + + /* Set SID from virtual channel number */ + buf[0] = channel->adc_channel >> 8; + + /* Set TM channel number used and measurement interval */ + buf[1] &= ~ADC_TM_GEN2_TM_CH_SEL; + buf[1] |= FIELD_PREP(ADC_TM_GEN2_TM_CH_SEL, channel->channel); + buf[1] &= ~ADC_TM_GEN2_MEAS_INT_SEL; + buf[1] |= FIELD_PREP(ADC_TM_GEN2_MEAS_INT_SEL, MEAS_INT_1S); + + buf[2] &= ~ADC_TM_GEN2_CTL_DEC_RATIO_MASK; + buf[2] |= FIELD_PREP(ADC_TM_GEN2_CTL_DEC_RATIO_MASK, channel->decimation); + buf[2] &= ~ADC_TM_GEN2_CTL_CAL_SEL; + buf[2] |= FIELD_PREP(ADC_TM_GEN2_CTL_CAL_SEL, channel->cal_method); + + buf[3] = channel->avg_samples | ADC_TM_GEN2_FAST_AVG_EN; + + buf[4] = channel->adc_channel & 0xff; + + buf[5] = channel->hw_settle_time & ADC_TM_GEN2_HW_SETTLE_DELAY; + + /* High temperature corresponds to low voltage threshold */ + if (high != INT_MAX) { + channel->low_thr_en = true; + adc_code = qcom_adc_tm5_gen2_temp_res_scale(high); + put_unaligned_le16(adc_code, &buf[9]); + } else { + channel->low_thr_en = false; + } + + /* Low temperature corresponds to high voltage threshold */ + if (low != -INT_MAX) { + channel->high_thr_en = true; + adc_code = qcom_adc_tm5_gen2_temp_res_scale(low); + put_unaligned_le16(adc_code, &buf[11]); + } else { + channel->high_thr_en = false; + } + + buf[13] = ADC_TM_GEN2_MEAS_EN; + if (channel->high_thr_en) + buf[13] |= ADC_TM5_GEN2_HIGH_THR_INT_EN; + if (channel->low_thr_en) + buf[13] |= ADC_TM5_GEN2_LOW_THR_INT_EN; + + ret = adc_tm5_write(chip, ADC_TM_GEN2_SID, buf, sizeof(buf)); + if (ret) { + dev_err(chip->dev, "channel %d params write failed: %d\n", channel->channel, ret); + goto config_fail; + } + + ret = adc_tm5_gen2_conv_req(channel->chip); + if (ret < 0) + dev_err(chip->dev, "adc-tm channel configure failed with %d\n", ret); + +config_fail: + mutex_unlock(&chip->adc_mutex_lock); + return ret; +} + +static int adc_tm5_set_trips(struct thermal_zone_device *tz, int low, int high) +{ + struct adc_tm5_channel *channel = tz->devdata; + struct adc_tm5_chip *chip; + int ret; + + if (!channel) + return -EINVAL; + + chip = channel->chip; + dev_dbg(chip->dev, "%d:low(mdegC):%d, high(mdegC):%d\n", + channel->channel, low, high); + + if (high == INT_MAX && low <= -INT_MAX) + ret = chip->data->disable_channel(channel); + else + ret = chip->data->configure(channel, low, high); + + return ret; +} + +static const struct thermal_zone_device_ops adc_tm5_thermal_ops = { + .get_temp = adc_tm5_get_temp, + .set_trips = adc_tm5_set_trips, +}; + +static int adc_tm5_register_tzd(struct adc_tm5_chip *adc_tm) +{ + unsigned int i; + struct thermal_zone_device *tzd; + + for (i = 0; i < adc_tm->nchannels; i++) { + adc_tm->channels[i].chip = adc_tm; + tzd = devm_thermal_of_zone_register(adc_tm->dev, + adc_tm->channels[i].channel, + &adc_tm->channels[i], + &adc_tm5_thermal_ops); + if (IS_ERR(tzd)) { + if (PTR_ERR(tzd) == -ENODEV) { + dev_warn(adc_tm->dev, "thermal sensor on channel %d is not used\n", + adc_tm->channels[i].channel); + continue; + } + + dev_err(adc_tm->dev, "Error registering TZ zone for channel %d: %ld\n", + adc_tm->channels[i].channel, PTR_ERR(tzd)); + return PTR_ERR(tzd); + } + adc_tm->channels[i].tzd = tzd; + if (devm_thermal_add_hwmon_sysfs(tzd)) + dev_warn(adc_tm->dev, + "Failed to add hwmon sysfs attributes\n"); + } + + return 0; +} + +static int adc_tm_hc_init(struct adc_tm5_chip *chip) +{ + unsigned int i; + u8 buf[2]; + int ret; + + for (i = 0; i < chip->nchannels; i++) { + if (chip->channels[i].channel >= ADC_TM5_NUM_CHANNELS) { + dev_err(chip->dev, "Invalid channel %d\n", chip->channels[i].channel); + return -EINVAL; + } + } + + buf[0] = chip->decimation; + buf[1] = chip->avg_samples | ADC_TM5_FAST_AVG_EN; + + ret = adc_tm5_write(chip, ADC_TM5_ADC_DIG_PARAM, buf, sizeof(buf)); + if (ret) + dev_err(chip->dev, "block write failed: %d\n", ret); + + return ret; +} + +static int adc_tm5_init(struct adc_tm5_chip *chip) +{ + u8 buf[4], channels_available; + int ret; + unsigned int i; + + ret = adc_tm5_read(chip, ADC_TM5_NUM_BTM, + &channels_available, sizeof(channels_available)); + if (ret) { + dev_err(chip->dev, "read failed for BTM channels\n"); + return ret; + } + + for (i = 0; i < chip->nchannels; i++) { + if (chip->channels[i].channel >= channels_available) { + dev_err(chip->dev, "Invalid channel %d\n", chip->channels[i].channel); + return -EINVAL; + } + } + + buf[0] = chip->decimation; + buf[1] = chip->avg_samples | ADC_TM5_FAST_AVG_EN; + buf[2] = ADC_TM5_TIMER1; + buf[3] = FIELD_PREP(ADC_TM5_MEAS_INTERVAL_CTL2_MASK, ADC_TM5_TIMER2) | + FIELD_PREP(ADC_TM5_MEAS_INTERVAL_CTL3_MASK, ADC_TM5_TIMER3); + + ret = adc_tm5_write(chip, ADC_TM5_ADC_DIG_PARAM, buf, sizeof(buf)); + if (ret) { + dev_err(chip->dev, "block write failed: %d\n", ret); + return ret; + } + + return ret; +} + +static int adc_tm5_gen2_init(struct adc_tm5_chip *chip) +{ + u8 channels_available; + int ret; + unsigned int i; + + ret = adc_tm5_read(chip, ADC_TM5_NUM_BTM, + &channels_available, sizeof(channels_available)); + if (ret) { + dev_err(chip->dev, "read failed for BTM channels\n"); + return ret; + } + + for (i = 0; i < chip->nchannels; i++) { + if (chip->channels[i].channel >= channels_available) { + dev_err(chip->dev, "Invalid channel %d\n", chip->channels[i].channel); + return -EINVAL; + } + } + + mutex_init(&chip->adc_mutex_lock); + + return ret; +} + +static int adc_tm5_get_dt_channel_data(struct adc_tm5_chip *adc_tm, + struct adc_tm5_channel *channel, + struct device_node *node) +{ + const char *name = node->name; + u32 chan, value, adc_channel, varr[2]; + int ret; + struct device *dev = adc_tm->dev; + struct of_phandle_args args; + + ret = of_property_read_u32(node, "reg", &chan); + if (ret) { + dev_err(dev, "%s: invalid channel number %d\n", name, ret); + return ret; + } + + if (chan >= ADC_TM5_NUM_CHANNELS) { + dev_err(dev, "%s: channel number too big: %d\n", name, chan); + return -EINVAL; + } + + channel->channel = chan; + + /* + * We are tied to PMIC's ADC controller, which always use single + * argument for channel number. So don't bother parsing + * #io-channel-cells, just enforce cell_count = 1. + */ + ret = of_parse_phandle_with_fixed_args(node, "io-channels", 1, 0, &args); + if (ret < 0) { + dev_err(dev, "%s: error parsing ADC channel number %d: %d\n", name, chan, ret); + return ret; + } + of_node_put(args.np); + + if (args.args_count != 1) { + dev_err(dev, "%s: invalid args count for ADC channel %d\n", name, chan); + return -EINVAL; + } + + adc_channel = args.args[0]; + if (adc_tm->data->gen == ADC_TM5_GEN2) + adc_channel &= 0xff; + + if (adc_channel >= ADC5_MAX_CHANNEL) { + dev_err(dev, "%s: invalid ADC channel number %d\n", name, chan); + return -EINVAL; + } + channel->adc_channel = args.args[0]; + + channel->iio = devm_fwnode_iio_channel_get_by_name(adc_tm->dev, + of_fwnode_handle(node), NULL); + if (IS_ERR(channel->iio)) { + ret = PTR_ERR(channel->iio); + if (ret != -EPROBE_DEFER) + dev_err(dev, "%s: error getting channel: %d\n", name, ret); + return ret; + } + + ret = of_property_read_u32_array(node, "qcom,pre-scaling", varr, 2); + if (!ret) { + ret = qcom_adc5_prescaling_from_dt(varr[0], varr[1]); + if (ret < 0) { + dev_err(dev, "%s: invalid pre-scaling <%d %d>\n", + name, varr[0], varr[1]); + return ret; + } + channel->prescale = ret; + } else { + /* 1:1 prescale is index 0 */ + channel->prescale = 0; + } + + ret = of_property_read_u32(node, "qcom,hw-settle-time-us", &value); + if (!ret) { + ret = qcom_adc5_hw_settle_time_from_dt(value, adc_tm->data->hw_settle); + if (ret < 0) { + dev_err(dev, "%s invalid hw-settle-time-us %d us\n", + name, value); + return ret; + } + channel->hw_settle_time = ret; + } else { + channel->hw_settle_time = VADC_DEF_HW_SETTLE_TIME; + } + + if (of_property_read_bool(node, "qcom,ratiometric")) + channel->cal_method = ADC_TM5_RATIOMETRIC_CAL; + else + channel->cal_method = ADC_TM5_ABSOLUTE_CAL; + + if (adc_tm->data->gen == ADC_TM5_GEN2) { + ret = of_property_read_u32(node, "qcom,decimation", &value); + if (!ret) { + ret = qcom_adc5_decimation_from_dt(value, adc_tm->data->decimation); + if (ret < 0) { + dev_err(dev, "invalid decimation %d\n", value); + return ret; + } + channel->decimation = ret; + } else { + channel->decimation = ADC5_DECIMATION_DEFAULT; + } + + ret = of_property_read_u32(node, "qcom,avg-samples", &value); + if (!ret) { + ret = qcom_adc5_avg_samples_from_dt(value); + if (ret < 0) { + dev_err(dev, "invalid avg-samples %d\n", value); + return ret; + } + channel->avg_samples = ret; + } else { + channel->avg_samples = VADC_DEF_AVG_SAMPLES; + } + } + + return 0; +} + +static const struct adc_tm5_data adc_tm5_data_pmic = { + .full_scale_code_volt = 0x70e4, + .decimation = (unsigned int []) { 250, 420, 840 }, + .hw_settle = (unsigned int []) { 15, 100, 200, 300, 400, 500, 600, 700, + 1000, 2000, 4000, 8000, 16000, 32000, + 64000, 128000 }, + .disable_channel = adc_tm5_disable_channel, + .configure = adc_tm5_configure, + .isr = adc_tm5_isr, + .init = adc_tm5_init, + .irq_name = "pm-adc-tm5", + .gen = ADC_TM5, +}; + +static const struct adc_tm5_data adc_tm_hc_data_pmic = { + .full_scale_code_volt = 0x70e4, + .decimation = (unsigned int []) { 256, 512, 1024 }, + .hw_settle = (unsigned int []) { 0, 100, 200, 300, 400, 500, 600, 700, + 1000, 2000, 4000, 6000, 8000, 10000 }, + .disable_channel = adc_tm5_disable_channel, + .configure = adc_tm5_configure, + .isr = adc_tm5_isr, + .init = adc_tm_hc_init, + .irq_name = "pm-adc-tm5", + .gen = ADC_TM_HC, +}; + +static const struct adc_tm5_data adc_tm5_gen2_data_pmic = { + .full_scale_code_volt = 0x70e4, + .decimation = (unsigned int []) { 85, 340, 1360 }, + .hw_settle = (unsigned int []) { 15, 100, 200, 300, 400, 500, 600, 700, + 1000, 2000, 4000, 8000, 16000, 32000, + 64000, 128000 }, + .disable_channel = adc_tm5_gen2_disable_channel, + .configure = adc_tm5_gen2_configure, + .isr = adc_tm5_gen2_isr, + .init = adc_tm5_gen2_init, + .irq_name = "pm-adc-tm5-gen2", + .gen = ADC_TM5_GEN2, +}; + +static int adc_tm5_get_dt_data(struct adc_tm5_chip *adc_tm, struct device_node *node) +{ + struct adc_tm5_channel *channels; + struct device_node *child; + u32 value; + int ret; + struct device *dev = adc_tm->dev; + + adc_tm->nchannels = of_get_available_child_count(node); + if (!adc_tm->nchannels) + return -EINVAL; + + adc_tm->channels = devm_kcalloc(dev, adc_tm->nchannels, + sizeof(*adc_tm->channels), GFP_KERNEL); + if (!adc_tm->channels) + return -ENOMEM; + + channels = adc_tm->channels; + + adc_tm->data = of_device_get_match_data(dev); + if (!adc_tm->data) + adc_tm->data = &adc_tm5_data_pmic; + + ret = of_property_read_u32(node, "qcom,decimation", &value); + if (!ret) { + ret = qcom_adc5_decimation_from_dt(value, adc_tm->data->decimation); + if (ret < 0) { + dev_err(dev, "invalid decimation %d\n", value); + return ret; + } + adc_tm->decimation = ret; + } else { + adc_tm->decimation = ADC5_DECIMATION_DEFAULT; + } + + ret = of_property_read_u32(node, "qcom,avg-samples", &value); + if (!ret) { + ret = qcom_adc5_avg_samples_from_dt(value); + if (ret < 0) { + dev_err(dev, "invalid avg-samples %d\n", value); + return ret; + } + adc_tm->avg_samples = ret; + } else { + adc_tm->avg_samples = VADC_DEF_AVG_SAMPLES; + } + + for_each_available_child_of_node(node, child) { + ret = adc_tm5_get_dt_channel_data(adc_tm, channels, child); + if (ret) { + of_node_put(child); + return ret; + } + + channels++; + } + + return 0; +} + +static int adc_tm5_probe(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + struct device *dev = &pdev->dev; + struct adc_tm5_chip *adc_tm; + struct regmap *regmap; + int ret, irq; + u32 reg; + + regmap = dev_get_regmap(dev->parent, NULL); + if (!regmap) + return -ENODEV; + + ret = of_property_read_u32(node, "reg", ®); + if (ret) + return ret; + + adc_tm = devm_kzalloc(&pdev->dev, sizeof(*adc_tm), GFP_KERNEL); + if (!adc_tm) + return -ENOMEM; + + adc_tm->regmap = regmap; + adc_tm->dev = dev; + adc_tm->base = reg; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + ret = adc_tm5_get_dt_data(adc_tm, node); + if (ret) { + dev_err(dev, "get dt data failed: %d\n", ret); + return ret; + } + + ret = adc_tm->data->init(adc_tm); + if (ret) { + dev_err(dev, "adc-tm init failed\n"); + return ret; + } + + ret = adc_tm5_register_tzd(adc_tm); + if (ret) { + dev_err(dev, "tzd register failed\n"); + return ret; + } + + return devm_request_threaded_irq(dev, irq, NULL, adc_tm->data->isr, + IRQF_ONESHOT, adc_tm->data->irq_name, adc_tm); +} + +static const struct of_device_id adc_tm5_match_table[] = { + { + .compatible = "qcom,spmi-adc-tm5", + .data = &adc_tm5_data_pmic, + }, + { + .compatible = "qcom,spmi-adc-tm-hc", + .data = &adc_tm_hc_data_pmic, + }, + { + .compatible = "qcom,spmi-adc-tm5-gen2", + .data = &adc_tm5_gen2_data_pmic, + }, + { } +}; +MODULE_DEVICE_TABLE(of, adc_tm5_match_table); + +static struct platform_driver adc_tm5_driver = { + .driver = { + .name = "qcom-spmi-adc-tm5", + .of_match_table = adc_tm5_match_table, + }, + .probe = adc_tm5_probe, +}; +module_platform_driver(adc_tm5_driver); + +MODULE_DESCRIPTION("SPMI PMIC Thermal Monitor ADC driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c new file mode 100644 index 000000000..ad8497810 --- /dev/null +++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c @@ -0,0 +1,494 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2011-2015, 2017, 2020, The Linux Foundation. All rights reserved. + */ + +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/iio/consumer.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/thermal.h> + +#include "../thermal_core.h" +#include "../thermal_hwmon.h" + +#define QPNP_TM_REG_DIG_MAJOR 0x01 +#define QPNP_TM_REG_TYPE 0x04 +#define QPNP_TM_REG_SUBTYPE 0x05 +#define QPNP_TM_REG_STATUS 0x08 +#define QPNP_TM_REG_SHUTDOWN_CTRL1 0x40 +#define QPNP_TM_REG_ALARM_CTRL 0x46 + +#define QPNP_TM_TYPE 0x09 +#define QPNP_TM_SUBTYPE_GEN1 0x08 +#define QPNP_TM_SUBTYPE_GEN2 0x09 + +#define STATUS_GEN1_STAGE_MASK GENMASK(1, 0) +#define STATUS_GEN2_STATE_MASK GENMASK(6, 4) +#define STATUS_GEN2_STATE_SHIFT 4 + +#define SHUTDOWN_CTRL1_OVERRIDE_S2 BIT(6) +#define SHUTDOWN_CTRL1_THRESHOLD_MASK GENMASK(1, 0) + +#define SHUTDOWN_CTRL1_RATE_25HZ BIT(3) + +#define ALARM_CTRL_FORCE_ENABLE BIT(7) + +#define THRESH_COUNT 4 +#define STAGE_COUNT 3 + +/* Over-temperature trip point values in mC */ +static const long temp_map_gen1[THRESH_COUNT][STAGE_COUNT] = { + { 105000, 125000, 145000 }, + { 110000, 130000, 150000 }, + { 115000, 135000, 155000 }, + { 120000, 140000, 160000 }, +}; + +static const long temp_map_gen2_v1[THRESH_COUNT][STAGE_COUNT] = { + { 90000, 110000, 140000 }, + { 95000, 115000, 145000 }, + { 100000, 120000, 150000 }, + { 105000, 125000, 155000 }, +}; + +#define TEMP_THRESH_STEP 5000 /* Threshold step: 5 C */ + +#define THRESH_MIN 0 +#define THRESH_MAX 3 + +#define TEMP_STAGE_HYSTERESIS 2000 + +/* Temperature in Milli Celsius reported during stage 0 if no ADC is present */ +#define DEFAULT_TEMP 37000 + +struct qpnp_tm_chip { + struct regmap *map; + struct device *dev; + struct thermal_zone_device *tz_dev; + unsigned int subtype; + long temp; + unsigned int thresh; + unsigned int stage; + unsigned int prev_stage; + unsigned int base; + /* protects .thresh, .stage and chip registers */ + struct mutex lock; + bool initialized; + + struct iio_channel *adc; + const long (*temp_map)[THRESH_COUNT][STAGE_COUNT]; +}; + +/* This array maps from GEN2 alarm state to GEN1 alarm stage */ +static const unsigned int alarm_state_map[8] = {0, 1, 1, 2, 2, 3, 3, 3}; + +static int qpnp_tm_read(struct qpnp_tm_chip *chip, u16 addr, u8 *data) +{ + unsigned int val; + int ret; + + ret = regmap_read(chip->map, chip->base + addr, &val); + if (ret < 0) + return ret; + + *data = val; + return 0; +} + +static int qpnp_tm_write(struct qpnp_tm_chip *chip, u16 addr, u8 data) +{ + return regmap_write(chip->map, chip->base + addr, data); +} + +/** + * qpnp_tm_decode_temp() - return temperature in mC corresponding to the + * specified over-temperature stage + * @chip: Pointer to the qpnp_tm chip + * @stage: Over-temperature stage + * + * Return: temperature in mC + */ +static long qpnp_tm_decode_temp(struct qpnp_tm_chip *chip, unsigned int stage) +{ + if (!chip->temp_map || chip->thresh >= THRESH_COUNT || stage == 0 || + stage > STAGE_COUNT) + return 0; + + return (*chip->temp_map)[chip->thresh][stage - 1]; +} + +/** + * qpnp_tm_get_temp_stage() - return over-temperature stage + * @chip: Pointer to the qpnp_tm chip + * + * Return: stage (GEN1) or state (GEN2) on success, or errno on failure. + */ +static int qpnp_tm_get_temp_stage(struct qpnp_tm_chip *chip) +{ + int ret; + u8 reg = 0; + + ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, ®); + if (ret < 0) + return ret; + + if (chip->subtype == QPNP_TM_SUBTYPE_GEN1) + ret = reg & STATUS_GEN1_STAGE_MASK; + else + ret = (reg & STATUS_GEN2_STATE_MASK) >> STATUS_GEN2_STATE_SHIFT; + + return ret; +} + +/* + * This function updates the internal temp value based on the + * current thermal stage and threshold as well as the previous stage + */ +static int qpnp_tm_update_temp_no_adc(struct qpnp_tm_chip *chip) +{ + unsigned int stage, stage_new, stage_old; + int ret; + + WARN_ON(!mutex_is_locked(&chip->lock)); + + ret = qpnp_tm_get_temp_stage(chip); + if (ret < 0) + return ret; + stage = ret; + + if (chip->subtype == QPNP_TM_SUBTYPE_GEN1) { + stage_new = stage; + stage_old = chip->stage; + } else { + stage_new = alarm_state_map[stage]; + stage_old = alarm_state_map[chip->stage]; + } + + if (stage_new > stage_old) { + /* increasing stage, use lower bound */ + chip->temp = qpnp_tm_decode_temp(chip, stage_new) + + TEMP_STAGE_HYSTERESIS; + } else if (stage_new < stage_old) { + /* decreasing stage, use upper bound */ + chip->temp = qpnp_tm_decode_temp(chip, stage_new + 1) + - TEMP_STAGE_HYSTERESIS; + } + + chip->stage = stage; + + return 0; +} + +static int qpnp_tm_get_temp(struct thermal_zone_device *tz, int *temp) +{ + struct qpnp_tm_chip *chip = tz->devdata; + int ret, mili_celsius; + + if (!temp) + return -EINVAL; + + if (!chip->initialized) { + *temp = DEFAULT_TEMP; + return 0; + } + + if (!chip->adc) { + mutex_lock(&chip->lock); + ret = qpnp_tm_update_temp_no_adc(chip); + mutex_unlock(&chip->lock); + if (ret < 0) + return ret; + } else { + ret = iio_read_channel_processed(chip->adc, &mili_celsius); + if (ret < 0) + return ret; + + chip->temp = mili_celsius; + } + + *temp = chip->temp; + + return 0; +} + +static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip, + int temp) +{ + long stage2_threshold_min = (*chip->temp_map)[THRESH_MIN][1]; + long stage2_threshold_max = (*chip->temp_map)[THRESH_MAX][1]; + bool disable_s2_shutdown = false; + u8 reg; + + WARN_ON(!mutex_is_locked(&chip->lock)); + + /* + * Default: S2 and S3 shutdown enabled, thresholds at + * lowest threshold set, monitoring at 25Hz + */ + reg = SHUTDOWN_CTRL1_RATE_25HZ; + + if (temp == THERMAL_TEMP_INVALID || + temp < stage2_threshold_min) { + chip->thresh = THRESH_MIN; + goto skip; + } + + if (temp <= stage2_threshold_max) { + chip->thresh = THRESH_MAX - + ((stage2_threshold_max - temp) / + TEMP_THRESH_STEP); + disable_s2_shutdown = true; + } else { + chip->thresh = THRESH_MAX; + + if (chip->adc) + disable_s2_shutdown = true; + else + dev_warn(chip->dev, + "No ADC is configured and critical temperature %d mC is above the maximum stage 2 threshold of %ld mC! Configuring stage 2 shutdown at %ld mC.\n", + temp, stage2_threshold_max, stage2_threshold_max); + } + +skip: + reg |= chip->thresh; + if (disable_s2_shutdown) + reg |= SHUTDOWN_CTRL1_OVERRIDE_S2; + + return qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg); +} + +static int qpnp_tm_set_trip_temp(struct thermal_zone_device *tz, int trip, int temp) +{ + struct qpnp_tm_chip *chip = tz->devdata; + const struct thermal_trip *trip_points; + int ret; + + trip_points = of_thermal_get_trip_points(chip->tz_dev); + if (!trip_points) + return -EINVAL; + + if (trip_points[trip].type != THERMAL_TRIP_CRITICAL) + return 0; + + mutex_lock(&chip->lock); + ret = qpnp_tm_update_critical_trip_temp(chip, temp); + mutex_unlock(&chip->lock); + + return ret; +} + +static const struct thermal_zone_device_ops qpnp_tm_sensor_ops = { + .get_temp = qpnp_tm_get_temp, + .set_trip_temp = qpnp_tm_set_trip_temp, +}; + +static irqreturn_t qpnp_tm_isr(int irq, void *data) +{ + struct qpnp_tm_chip *chip = data; + + thermal_zone_device_update(chip->tz_dev, THERMAL_EVENT_UNSPECIFIED); + + return IRQ_HANDLED; +} + +static int qpnp_tm_get_critical_trip_temp(struct qpnp_tm_chip *chip) +{ + int ntrips; + const struct thermal_trip *trips; + int i; + + ntrips = of_thermal_get_ntrips(chip->tz_dev); + if (ntrips <= 0) + return THERMAL_TEMP_INVALID; + + trips = of_thermal_get_trip_points(chip->tz_dev); + if (!trips) + return THERMAL_TEMP_INVALID; + + for (i = 0; i < ntrips; i++) { + if (of_thermal_is_trip_valid(chip->tz_dev, i) && + trips[i].type == THERMAL_TRIP_CRITICAL) + return trips[i].temperature; + } + + return THERMAL_TEMP_INVALID; +} + +/* + * This function initializes the internal temp value based on only the + * current thermal stage and threshold. Setup threshold control and + * disable shutdown override. + */ +static int qpnp_tm_init(struct qpnp_tm_chip *chip) +{ + unsigned int stage; + int ret; + u8 reg = 0; + int crit_temp; + + mutex_lock(&chip->lock); + + ret = qpnp_tm_read(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, ®); + if (ret < 0) + goto out; + + chip->thresh = reg & SHUTDOWN_CTRL1_THRESHOLD_MASK; + chip->temp = DEFAULT_TEMP; + + ret = qpnp_tm_get_temp_stage(chip); + if (ret < 0) + goto out; + chip->stage = ret; + + stage = chip->subtype == QPNP_TM_SUBTYPE_GEN1 + ? chip->stage : alarm_state_map[chip->stage]; + + if (stage) + chip->temp = qpnp_tm_decode_temp(chip, stage); + + crit_temp = qpnp_tm_get_critical_trip_temp(chip); + ret = qpnp_tm_update_critical_trip_temp(chip, crit_temp); + if (ret < 0) + goto out; + + /* Enable the thermal alarm PMIC module in always-on mode. */ + reg = ALARM_CTRL_FORCE_ENABLE; + ret = qpnp_tm_write(chip, QPNP_TM_REG_ALARM_CTRL, reg); + + chip->initialized = true; + +out: + mutex_unlock(&chip->lock); + return ret; +} + +static int qpnp_tm_probe(struct platform_device *pdev) +{ + struct qpnp_tm_chip *chip; + struct device_node *node; + u8 type, subtype, dig_major; + u32 res; + int ret, irq; + + node = pdev->dev.of_node; + + chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + dev_set_drvdata(&pdev->dev, chip); + chip->dev = &pdev->dev; + + mutex_init(&chip->lock); + + chip->map = dev_get_regmap(pdev->dev.parent, NULL); + if (!chip->map) + return -ENXIO; + + ret = of_property_read_u32(node, "reg", &res); + if (ret < 0) + return ret; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + /* ADC based measurements are optional */ + chip->adc = devm_iio_channel_get(&pdev->dev, "thermal"); + if (IS_ERR(chip->adc)) { + ret = PTR_ERR(chip->adc); + chip->adc = NULL; + if (ret == -EPROBE_DEFER) + return ret; + } + + chip->base = res; + + ret = qpnp_tm_read(chip, QPNP_TM_REG_TYPE, &type); + if (ret < 0) { + dev_err(&pdev->dev, "could not read type\n"); + return ret; + } + + ret = qpnp_tm_read(chip, QPNP_TM_REG_SUBTYPE, &subtype); + if (ret < 0) { + dev_err(&pdev->dev, "could not read subtype\n"); + return ret; + } + + ret = qpnp_tm_read(chip, QPNP_TM_REG_DIG_MAJOR, &dig_major); + if (ret < 0) { + dev_err(&pdev->dev, "could not read dig_major\n"); + return ret; + } + + if (type != QPNP_TM_TYPE || (subtype != QPNP_TM_SUBTYPE_GEN1 + && subtype != QPNP_TM_SUBTYPE_GEN2)) { + dev_err(&pdev->dev, "invalid type 0x%02x or subtype 0x%02x\n", + type, subtype); + return -ENODEV; + } + + chip->subtype = subtype; + if (subtype == QPNP_TM_SUBTYPE_GEN2 && dig_major >= 1) + chip->temp_map = &temp_map_gen2_v1; + else + chip->temp_map = &temp_map_gen1; + + /* + * Register the sensor before initializing the hardware to be able to + * read the trip points. get_temp() returns the default temperature + * before the hardware initialization is completed. + */ + chip->tz_dev = devm_thermal_of_zone_register( + &pdev->dev, 0, chip, &qpnp_tm_sensor_ops); + if (IS_ERR(chip->tz_dev)) { + dev_err(&pdev->dev, "failed to register sensor\n"); + return PTR_ERR(chip->tz_dev); + } + + ret = qpnp_tm_init(chip); + if (ret < 0) { + dev_err(&pdev->dev, "init failed\n"); + return ret; + } + + if (devm_thermal_add_hwmon_sysfs(chip->tz_dev)) + dev_warn(&pdev->dev, + "Failed to add hwmon sysfs attributes\n"); + + ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, qpnp_tm_isr, + IRQF_ONESHOT, node->name, chip); + if (ret < 0) + return ret; + + thermal_zone_device_update(chip->tz_dev, THERMAL_EVENT_UNSPECIFIED); + + return 0; +} + +static const struct of_device_id qpnp_tm_match_table[] = { + { .compatible = "qcom,spmi-temp-alarm" }, + { } +}; +MODULE_DEVICE_TABLE(of, qpnp_tm_match_table); + +static struct platform_driver qpnp_tm_driver = { + .driver = { + .name = "spmi-temp-alarm", + .of_match_table = qpnp_tm_match_table, + }, + .probe = qpnp_tm_probe, +}; +module_platform_driver(qpnp_tm_driver); + +MODULE_ALIAS("platform:spmi-temp-alarm"); +MODULE_DESCRIPTION("QPNP PMIC Temperature Alarm driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c new file mode 100644 index 000000000..67c1748cd --- /dev/null +++ b/drivers/thermal/qcom/tsens-8960.c @@ -0,0 +1,282 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + */ + +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/bitops.h> +#include <linux/regmap.h> +#include <linux/thermal.h> +#include "tsens.h" + +#define CONFIG_ADDR 0x3640 +#define CONFIG_ADDR_8660 0x3620 +/* CONFIG_ADDR bitmasks */ +#define CONFIG 0x9b +#define CONFIG_MASK 0xf +#define CONFIG_8660 1 +#define CONFIG_SHIFT_8660 28 +#define CONFIG_MASK_8660 (3 << CONFIG_SHIFT_8660) + +#define CNTL_ADDR 0x3620 +/* CNTL_ADDR bitmasks */ +#define EN BIT(0) +#define SW_RST BIT(1) + +#define MEASURE_PERIOD BIT(18) +#define SLP_CLK_ENA BIT(26) +#define SLP_CLK_ENA_8660 BIT(24) +#define SENSOR0_SHIFT 3 + +#define THRESHOLD_ADDR 0x3624 + +#define INT_STATUS_ADDR 0x363c + +#define S0_STATUS_OFF 0x3628 +#define S1_STATUS_OFF 0x362c +#define S2_STATUS_OFF 0x3630 +#define S3_STATUS_OFF 0x3634 +#define S4_STATUS_OFF 0x3638 +#define S5_STATUS_OFF 0x3664 /* Sensors 5-10 found on apq8064/msm8960 */ +#define S6_STATUS_OFF 0x3668 +#define S7_STATUS_OFF 0x366c +#define S8_STATUS_OFF 0x3670 +#define S9_STATUS_OFF 0x3674 +#define S10_STATUS_OFF 0x3678 + +/* Original slope - 350 to compensate mC to C inaccuracy */ +static u32 tsens_msm8960_slope[] = { + 826, 826, 804, 826, + 761, 782, 782, 849, + 782, 849, 782 + }; + +static int suspend_8960(struct tsens_priv *priv) +{ + int ret; + unsigned int mask; + struct regmap *map = priv->tm_map; + + ret = regmap_read(map, THRESHOLD_ADDR, &priv->ctx.threshold); + if (ret) + return ret; + + ret = regmap_read(map, CNTL_ADDR, &priv->ctx.control); + if (ret) + return ret; + + if (priv->num_sensors > 1) + mask = SLP_CLK_ENA | EN; + else + mask = SLP_CLK_ENA_8660 | EN; + + ret = regmap_update_bits(map, CNTL_ADDR, mask, 0); + if (ret) + return ret; + + return 0; +} + +static int resume_8960(struct tsens_priv *priv) +{ + int ret; + struct regmap *map = priv->tm_map; + + ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST); + if (ret) + return ret; + + /* + * Separate CONFIG restore is not needed only for 8660 as + * config is part of CTRL Addr and its restored as such + */ + if (priv->num_sensors > 1) { + ret = regmap_update_bits(map, CONFIG_ADDR, CONFIG_MASK, CONFIG); + if (ret) + return ret; + } + + ret = regmap_write(map, THRESHOLD_ADDR, priv->ctx.threshold); + if (ret) + return ret; + + ret = regmap_write(map, CNTL_ADDR, priv->ctx.control); + if (ret) + return ret; + + return 0; +} + +static int enable_8960(struct tsens_priv *priv, int id) +{ + int ret; + u32 reg, mask = BIT(id); + + ret = regmap_read(priv->tm_map, CNTL_ADDR, ®); + if (ret) + return ret; + + /* HARDWARE BUG: + * On platforms with more than 6 sensors, all remaining sensors + * must be enabled together, otherwise undefined results are expected. + * (Sensor 6-7 disabled, Sensor 3 disabled...) In the original driver, + * all the sensors are enabled in one step hence this bug is not + * triggered. + */ + if (id > 5) + mask = GENMASK(10, 6); + + mask <<= SENSOR0_SHIFT; + + /* Sensors already enabled. Skip. */ + if ((reg & mask) == mask) + return 0; + + ret = regmap_write(priv->tm_map, CNTL_ADDR, reg | SW_RST); + if (ret) + return ret; + + reg |= MEASURE_PERIOD; + + if (priv->num_sensors > 1) + reg |= mask | SLP_CLK_ENA | EN; + else + reg |= mask | SLP_CLK_ENA_8660 | EN; + + ret = regmap_write(priv->tm_map, CNTL_ADDR, reg); + if (ret) + return ret; + + return 0; +} + +static void disable_8960(struct tsens_priv *priv) +{ + int ret; + u32 reg_cntl; + u32 mask; + + mask = GENMASK(priv->num_sensors - 1, 0); + mask <<= SENSOR0_SHIFT; + mask |= EN; + + ret = regmap_read(priv->tm_map, CNTL_ADDR, ®_cntl); + if (ret) + return; + + reg_cntl &= ~mask; + + if (priv->num_sensors > 1) + reg_cntl &= ~SLP_CLK_ENA; + else + reg_cntl &= ~SLP_CLK_ENA_8660; + + regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl); +} + +static int calibrate_8960(struct tsens_priv *priv) +{ + int i; + char *data; + u32 p1[11]; + + data = qfprom_read(priv->dev, "calib"); + if (IS_ERR(data)) + data = qfprom_read(priv->dev, "calib_backup"); + if (IS_ERR(data)) + return PTR_ERR(data); + + for (i = 0; i < priv->num_sensors; i++) { + p1[i] = data[i]; + priv->sensor[i].slope = tsens_msm8960_slope[i]; + } + + compute_intercept_slope(priv, p1, NULL, ONE_PT_CALIB); + + kfree(data); + + return 0; +} + +static const struct reg_field tsens_8960_regfields[MAX_REGFIELDS] = { + /* ----- SROT ------ */ + /* No VERSION information */ + + /* CNTL */ + [TSENS_EN] = REG_FIELD(CNTL_ADDR, 0, 0), + [TSENS_SW_RST] = REG_FIELD(CNTL_ADDR, 1, 1), + /* 8960 has 5 sensors, 8660 has 11, we only handle 5 */ + [SENSOR_EN] = REG_FIELD(CNTL_ADDR, 3, 7), + + /* ----- TM ------ */ + /* INTERRUPT ENABLE */ + /* NO INTERRUPT ENABLE */ + + /* Single UPPER/LOWER TEMPERATURE THRESHOLD for all sensors */ + [LOW_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 0, 7), + [UP_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 8, 15), + /* MIN_THRESH_0 and MAX_THRESH_0 are not present in the regfield + * Recycle CRIT_THRESH_0 and 1 to set the required regs to hardcoded temp + * MIN_THRESH_0 -> CRIT_THRESH_1 + * MAX_THRESH_0 -> CRIT_THRESH_0 + */ + [CRIT_THRESH_1] = REG_FIELD(THRESHOLD_ADDR, 16, 23), + [CRIT_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 24, 31), + + /* UPPER/LOWER INTERRUPT [CLEAR/STATUS] */ + /* 1 == clear, 0 == normal operation */ + [LOW_INT_CLEAR_0] = REG_FIELD(CNTL_ADDR, 9, 9), + [UP_INT_CLEAR_0] = REG_FIELD(CNTL_ADDR, 10, 10), + + /* NO CRITICAL INTERRUPT SUPPORT on 8960 */ + + /* Sn_STATUS */ + [LAST_TEMP_0] = REG_FIELD(S0_STATUS_OFF, 0, 7), + [LAST_TEMP_1] = REG_FIELD(S1_STATUS_OFF, 0, 7), + [LAST_TEMP_2] = REG_FIELD(S2_STATUS_OFF, 0, 7), + [LAST_TEMP_3] = REG_FIELD(S3_STATUS_OFF, 0, 7), + [LAST_TEMP_4] = REG_FIELD(S4_STATUS_OFF, 0, 7), + [LAST_TEMP_5] = REG_FIELD(S5_STATUS_OFF, 0, 7), + [LAST_TEMP_6] = REG_FIELD(S6_STATUS_OFF, 0, 7), + [LAST_TEMP_7] = REG_FIELD(S7_STATUS_OFF, 0, 7), + [LAST_TEMP_8] = REG_FIELD(S8_STATUS_OFF, 0, 7), + [LAST_TEMP_9] = REG_FIELD(S9_STATUS_OFF, 0, 7), + [LAST_TEMP_10] = REG_FIELD(S10_STATUS_OFF, 0, 7), + + /* No VALID field on 8960 */ + /* TSENS_INT_STATUS bits: 1 == threshold violated */ + [MIN_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 0, 0), + [LOWER_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 1, 1), + [UPPER_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 2, 2), + /* No CRITICAL field on 8960 */ + [MAX_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 3, 3), + + /* TRDY: 1=ready, 0=in progress */ + [TRDY] = REG_FIELD(INT_STATUS_ADDR, 7, 7), +}; + +static const struct tsens_ops ops_8960 = { + .init = init_common, + .calibrate = calibrate_8960, + .get_temp = get_temp_common, + .enable = enable_8960, + .disable = disable_8960, + .suspend = suspend_8960, + .resume = resume_8960, +}; + +static struct tsens_features tsens_8960_feat = { + .ver_major = VER_0, + .crit_int = 0, + .adc = 1, + .srot_split = 0, + .max_sensors = 11, +}; + +struct tsens_plat_data data_8960 = { + .num_sensors = 11, + .ops = &ops_8960, + .feat = &tsens_8960_feat, + .fields = tsens_8960_regfields, +}; diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c new file mode 100644 index 000000000..8d036727b --- /dev/null +++ b/drivers/thermal/qcom/tsens-v0_1.c @@ -0,0 +1,648 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + */ + +#include <linux/platform_device.h> +#include "tsens.h" + +/* ----- SROT ------ */ +#define SROT_CTRL_OFF 0x0000 + +/* ----- TM ------ */ +#define TM_INT_EN_OFF 0x0000 +#define TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF 0x0004 +#define TM_Sn_STATUS_OFF 0x0030 +#define TM_TRDY_OFF 0x005c + +/* eeprom layout data for 8916 */ +#define MSM8916_BASE0_MASK 0x0000007f +#define MSM8916_BASE1_MASK 0xfe000000 +#define MSM8916_BASE0_SHIFT 0 +#define MSM8916_BASE1_SHIFT 25 + +#define MSM8916_S0_P1_MASK 0x00000f80 +#define MSM8916_S1_P1_MASK 0x003e0000 +#define MSM8916_S2_P1_MASK 0xf8000000 +#define MSM8916_S3_P1_MASK 0x000003e0 +#define MSM8916_S4_P1_MASK 0x000f8000 + +#define MSM8916_S0_P2_MASK 0x0001f000 +#define MSM8916_S1_P2_MASK 0x07c00000 +#define MSM8916_S2_P2_MASK 0x0000001f +#define MSM8916_S3_P2_MASK 0x00007c00 +#define MSM8916_S4_P2_MASK 0x01f00000 + +#define MSM8916_S0_P1_SHIFT 7 +#define MSM8916_S1_P1_SHIFT 17 +#define MSM8916_S2_P1_SHIFT 27 +#define MSM8916_S3_P1_SHIFT 5 +#define MSM8916_S4_P1_SHIFT 15 + +#define MSM8916_S0_P2_SHIFT 12 +#define MSM8916_S1_P2_SHIFT 22 +#define MSM8916_S2_P2_SHIFT 0 +#define MSM8916_S3_P2_SHIFT 10 +#define MSM8916_S4_P2_SHIFT 20 + +#define MSM8916_CAL_SEL_MASK 0xe0000000 +#define MSM8916_CAL_SEL_SHIFT 29 + +/* eeprom layout data for 8939 */ +#define MSM8939_BASE0_MASK 0x000000ff +#define MSM8939_BASE1_MASK 0xff000000 +#define MSM8939_BASE0_SHIFT 0 +#define MSM8939_BASE1_SHIFT 24 + +#define MSM8939_S0_P1_MASK 0x000001f8 +#define MSM8939_S1_P1_MASK 0x001f8000 +#define MSM8939_S2_P1_MASK_0_4 0xf8000000 +#define MSM8939_S2_P1_MASK_5 0x00000001 +#define MSM8939_S3_P1_MASK 0x00001f80 +#define MSM8939_S4_P1_MASK 0x01f80000 +#define MSM8939_S5_P1_MASK 0x00003f00 +#define MSM8939_S6_P1_MASK 0x03f00000 +#define MSM8939_S7_P1_MASK 0x0000003f +#define MSM8939_S8_P1_MASK 0x0003f000 +#define MSM8939_S9_P1_MASK 0x07e00000 + +#define MSM8939_S0_P2_MASK 0x00007e00 +#define MSM8939_S1_P2_MASK 0x07e00000 +#define MSM8939_S2_P2_MASK 0x0000007e +#define MSM8939_S3_P2_MASK 0x0007e000 +#define MSM8939_S4_P2_MASK 0x7e000000 +#define MSM8939_S5_P2_MASK 0x000fc000 +#define MSM8939_S6_P2_MASK 0xfc000000 +#define MSM8939_S7_P2_MASK 0x00000fc0 +#define MSM8939_S8_P2_MASK 0x00fc0000 +#define MSM8939_S9_P2_MASK_0_4 0xf8000000 +#define MSM8939_S9_P2_MASK_5 0x00002000 + +#define MSM8939_S0_P1_SHIFT 3 +#define MSM8939_S1_P1_SHIFT 15 +#define MSM8939_S2_P1_SHIFT_0_4 27 +#define MSM8939_S2_P1_SHIFT_5 0 +#define MSM8939_S3_P1_SHIFT 7 +#define MSM8939_S4_P1_SHIFT 19 +#define MSM8939_S5_P1_SHIFT 8 +#define MSM8939_S6_P1_SHIFT 20 +#define MSM8939_S7_P1_SHIFT 0 +#define MSM8939_S8_P1_SHIFT 12 +#define MSM8939_S9_P1_SHIFT 21 + +#define MSM8939_S0_P2_SHIFT 9 +#define MSM8939_S1_P2_SHIFT 21 +#define MSM8939_S2_P2_SHIFT 1 +#define MSM8939_S3_P2_SHIFT 13 +#define MSM8939_S4_P2_SHIFT 25 +#define MSM8939_S5_P2_SHIFT 14 +#define MSM8939_S6_P2_SHIFT 26 +#define MSM8939_S7_P2_SHIFT 6 +#define MSM8939_S8_P2_SHIFT 18 +#define MSM8939_S9_P2_SHIFT_0_4 27 +#define MSM8939_S9_P2_SHIFT_5 13 + +#define MSM8939_CAL_SEL_MASK 0x7 +#define MSM8939_CAL_SEL_SHIFT 0 + +/* eeprom layout data for 8974 */ +#define BASE1_MASK 0xff +#define S0_P1_MASK 0x3f00 +#define S1_P1_MASK 0xfc000 +#define S2_P1_MASK 0x3f00000 +#define S3_P1_MASK 0xfc000000 +#define S4_P1_MASK 0x3f +#define S5_P1_MASK 0xfc0 +#define S6_P1_MASK 0x3f000 +#define S7_P1_MASK 0xfc0000 +#define S8_P1_MASK 0x3f000000 +#define S8_P1_MASK_BKP 0x3f +#define S9_P1_MASK 0x3f +#define S9_P1_MASK_BKP 0xfc0 +#define S10_P1_MASK 0xfc0 +#define S10_P1_MASK_BKP 0x3f000 +#define CAL_SEL_0_1 0xc0000000 +#define CAL_SEL_2 0x40000000 +#define CAL_SEL_SHIFT 30 +#define CAL_SEL_SHIFT_2 28 + +#define S0_P1_SHIFT 8 +#define S1_P1_SHIFT 14 +#define S2_P1_SHIFT 20 +#define S3_P1_SHIFT 26 +#define S5_P1_SHIFT 6 +#define S6_P1_SHIFT 12 +#define S7_P1_SHIFT 18 +#define S8_P1_SHIFT 24 +#define S9_P1_BKP_SHIFT 6 +#define S10_P1_SHIFT 6 +#define S10_P1_BKP_SHIFT 12 + +#define BASE2_SHIFT 12 +#define BASE2_BKP_SHIFT 18 +#define S0_P2_SHIFT 20 +#define S0_P2_BKP_SHIFT 26 +#define S1_P2_SHIFT 26 +#define S2_P2_BKP_SHIFT 6 +#define S3_P2_SHIFT 6 +#define S3_P2_BKP_SHIFT 12 +#define S4_P2_SHIFT 12 +#define S4_P2_BKP_SHIFT 18 +#define S5_P2_SHIFT 18 +#define S5_P2_BKP_SHIFT 24 +#define S6_P2_SHIFT 24 +#define S7_P2_BKP_SHIFT 6 +#define S8_P2_SHIFT 6 +#define S8_P2_BKP_SHIFT 12 +#define S9_P2_SHIFT 12 +#define S9_P2_BKP_SHIFT 18 +#define S10_P2_SHIFT 18 +#define S10_P2_BKP_SHIFT 24 + +#define BASE2_MASK 0xff000 +#define BASE2_BKP_MASK 0xfc0000 +#define S0_P2_MASK 0x3f00000 +#define S0_P2_BKP_MASK 0xfc000000 +#define S1_P2_MASK 0xfc000000 +#define S1_P2_BKP_MASK 0x3f +#define S2_P2_MASK 0x3f +#define S2_P2_BKP_MASK 0xfc0 +#define S3_P2_MASK 0xfc0 +#define S3_P2_BKP_MASK 0x3f000 +#define S4_P2_MASK 0x3f000 +#define S4_P2_BKP_MASK 0xfc0000 +#define S5_P2_MASK 0xfc0000 +#define S5_P2_BKP_MASK 0x3f000000 +#define S6_P2_MASK 0x3f000000 +#define S6_P2_BKP_MASK 0x3f +#define S7_P2_MASK 0x3f +#define S7_P2_BKP_MASK 0xfc0 +#define S8_P2_MASK 0xfc0 +#define S8_P2_BKP_MASK 0x3f000 +#define S9_P2_MASK 0x3f000 +#define S9_P2_BKP_MASK 0xfc0000 +#define S10_P2_MASK 0xfc0000 +#define S10_P2_BKP_MASK 0x3f000000 + +#define BKP_SEL 0x3 +#define BKP_REDUN_SEL 0xe0000000 +#define BKP_REDUN_SHIFT 29 + +#define BIT_APPEND 0x3 + +/* eeprom layout data for mdm9607 */ +#define MDM9607_BASE0_MASK 0x000000ff +#define MDM9607_BASE1_MASK 0x000ff000 +#define MDM9607_BASE0_SHIFT 0 +#define MDM9607_BASE1_SHIFT 12 + +#define MDM9607_S0_P1_MASK 0x00003f00 +#define MDM9607_S1_P1_MASK 0x03f00000 +#define MDM9607_S2_P1_MASK 0x0000003f +#define MDM9607_S3_P1_MASK 0x0003f000 +#define MDM9607_S4_P1_MASK 0x0000003f + +#define MDM9607_S0_P2_MASK 0x000fc000 +#define MDM9607_S1_P2_MASK 0xfc000000 +#define MDM9607_S2_P2_MASK 0x00000fc0 +#define MDM9607_S3_P2_MASK 0x00fc0000 +#define MDM9607_S4_P2_MASK 0x00000fc0 + +#define MDM9607_S0_P1_SHIFT 8 +#define MDM9607_S1_P1_SHIFT 20 +#define MDM9607_S2_P1_SHIFT 0 +#define MDM9607_S3_P1_SHIFT 12 +#define MDM9607_S4_P1_SHIFT 0 + +#define MDM9607_S0_P2_SHIFT 14 +#define MDM9607_S1_P2_SHIFT 26 +#define MDM9607_S2_P2_SHIFT 6 +#define MDM9607_S3_P2_SHIFT 18 +#define MDM9607_S4_P2_SHIFT 6 + +#define MDM9607_CAL_SEL_MASK 0x00700000 +#define MDM9607_CAL_SEL_SHIFT 20 + +static int calibrate_8916(struct tsens_priv *priv) +{ + int base0 = 0, base1 = 0, i; + u32 p1[5], p2[5]; + int mode = 0; + u32 *qfprom_cdata, *qfprom_csel; + + qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib"); + if (IS_ERR(qfprom_cdata)) + return PTR_ERR(qfprom_cdata); + + qfprom_csel = (u32 *)qfprom_read(priv->dev, "calib_sel"); + if (IS_ERR(qfprom_csel)) { + kfree(qfprom_cdata); + return PTR_ERR(qfprom_csel); + } + + mode = (qfprom_csel[0] & MSM8916_CAL_SEL_MASK) >> MSM8916_CAL_SEL_SHIFT; + dev_dbg(priv->dev, "calibration mode is %d\n", mode); + + switch (mode) { + case TWO_PT_CALIB: + base1 = (qfprom_cdata[1] & MSM8916_BASE1_MASK) >> MSM8916_BASE1_SHIFT; + p2[0] = (qfprom_cdata[0] & MSM8916_S0_P2_MASK) >> MSM8916_S0_P2_SHIFT; + p2[1] = (qfprom_cdata[0] & MSM8916_S1_P2_MASK) >> MSM8916_S1_P2_SHIFT; + p2[2] = (qfprom_cdata[1] & MSM8916_S2_P2_MASK) >> MSM8916_S2_P2_SHIFT; + p2[3] = (qfprom_cdata[1] & MSM8916_S3_P2_MASK) >> MSM8916_S3_P2_SHIFT; + p2[4] = (qfprom_cdata[1] & MSM8916_S4_P2_MASK) >> MSM8916_S4_P2_SHIFT; + for (i = 0; i < priv->num_sensors; i++) + p2[i] = ((base1 + p2[i]) << 3); + fallthrough; + case ONE_PT_CALIB2: + base0 = (qfprom_cdata[0] & MSM8916_BASE0_MASK); + p1[0] = (qfprom_cdata[0] & MSM8916_S0_P1_MASK) >> MSM8916_S0_P1_SHIFT; + p1[1] = (qfprom_cdata[0] & MSM8916_S1_P1_MASK) >> MSM8916_S1_P1_SHIFT; + p1[2] = (qfprom_cdata[0] & MSM8916_S2_P1_MASK) >> MSM8916_S2_P1_SHIFT; + p1[3] = (qfprom_cdata[1] & MSM8916_S3_P1_MASK) >> MSM8916_S3_P1_SHIFT; + p1[4] = (qfprom_cdata[1] & MSM8916_S4_P1_MASK) >> MSM8916_S4_P1_SHIFT; + for (i = 0; i < priv->num_sensors; i++) + p1[i] = (((base0) + p1[i]) << 3); + break; + default: + for (i = 0; i < priv->num_sensors; i++) { + p1[i] = 500; + p2[i] = 780; + } + break; + } + + compute_intercept_slope(priv, p1, p2, mode); + kfree(qfprom_cdata); + kfree(qfprom_csel); + + return 0; +} + +static int calibrate_8939(struct tsens_priv *priv) +{ + int base0 = 0, base1 = 0, i; + u32 p1[10], p2[10]; + int mode = 0; + u32 *qfprom_cdata; + u32 cdata[4]; + + qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib"); + if (IS_ERR(qfprom_cdata)) + return PTR_ERR(qfprom_cdata); + + /* Mapping between qfprom nvmem and calibration data */ + cdata[0] = qfprom_cdata[12]; + cdata[1] = qfprom_cdata[13]; + cdata[2] = qfprom_cdata[0]; + cdata[3] = qfprom_cdata[1]; + + mode = (cdata[0] & MSM8939_CAL_SEL_MASK) >> MSM8939_CAL_SEL_SHIFT; + dev_dbg(priv->dev, "calibration mode is %d\n", mode); + + switch (mode) { + case TWO_PT_CALIB: + base1 = (cdata[3] & MSM8939_BASE1_MASK) >> MSM8939_BASE1_SHIFT; + p2[0] = (cdata[0] & MSM8939_S0_P2_MASK) >> MSM8939_S0_P2_SHIFT; + p2[1] = (cdata[0] & MSM8939_S1_P2_MASK) >> MSM8939_S1_P2_SHIFT; + p2[2] = (cdata[1] & MSM8939_S2_P2_MASK) >> MSM8939_S2_P2_SHIFT; + p2[3] = (cdata[1] & MSM8939_S3_P2_MASK) >> MSM8939_S3_P2_SHIFT; + p2[4] = (cdata[1] & MSM8939_S4_P2_MASK) >> MSM8939_S4_P2_SHIFT; + p2[5] = (cdata[2] & MSM8939_S5_P2_MASK) >> MSM8939_S5_P2_SHIFT; + p2[6] = (cdata[2] & MSM8939_S6_P2_MASK) >> MSM8939_S6_P2_SHIFT; + p2[7] = (cdata[3] & MSM8939_S7_P2_MASK) >> MSM8939_S7_P2_SHIFT; + p2[8] = (cdata[3] & MSM8939_S8_P2_MASK) >> MSM8939_S8_P2_SHIFT; + for (i = 0; i < priv->num_sensors; i++) + p2[i] = (base1 + p2[i]) << 2; + fallthrough; + case ONE_PT_CALIB2: + base0 = (cdata[2] & MSM8939_BASE0_MASK) >> MSM8939_BASE0_SHIFT; + p1[0] = (cdata[0] & MSM8939_S0_P1_MASK) >> MSM8939_S0_P1_SHIFT; + p1[1] = (cdata[0] & MSM8939_S1_P1_MASK) >> MSM8939_S1_P1_SHIFT; + p1[2] = (cdata[0] & MSM8939_S2_P1_MASK_0_4) >> MSM8939_S2_P1_SHIFT_0_4; + p1[2] |= ((cdata[1] & MSM8939_S2_P1_MASK_5) >> MSM8939_S2_P1_SHIFT_5) << 5; + p1[3] = (cdata[1] & MSM8939_S3_P1_MASK) >> MSM8939_S3_P1_SHIFT; + p1[4] = (cdata[1] & MSM8939_S4_P1_MASK) >> MSM8939_S4_P1_SHIFT; + p1[5] = (cdata[2] & MSM8939_S5_P1_MASK) >> MSM8939_S5_P1_SHIFT; + p1[6] = (cdata[2] & MSM8939_S6_P1_MASK) >> MSM8939_S6_P1_SHIFT; + p1[7] = (cdata[3] & MSM8939_S7_P1_MASK) >> MSM8939_S7_P1_SHIFT; + p1[8] = (cdata[3] & MSM8939_S8_P1_MASK) >> MSM8939_S8_P1_SHIFT; + for (i = 0; i < priv->num_sensors; i++) + p1[i] = ((base0) + p1[i]) << 2; + break; + default: + for (i = 0; i < priv->num_sensors; i++) { + p1[i] = 500; + p2[i] = 780; + } + break; + } + + compute_intercept_slope(priv, p1, p2, mode); + kfree(qfprom_cdata); + + return 0; +} + +static int calibrate_8974(struct tsens_priv *priv) +{ + int base1 = 0, base2 = 0, i; + u32 p1[11], p2[11]; + int mode = 0; + u32 *calib, *bkp; + u32 calib_redun_sel; + + calib = (u32 *)qfprom_read(priv->dev, "calib"); + if (IS_ERR(calib)) + return PTR_ERR(calib); + + bkp = (u32 *)qfprom_read(priv->dev, "calib_backup"); + if (IS_ERR(bkp)) { + kfree(calib); + return PTR_ERR(bkp); + } + + calib_redun_sel = bkp[1] & BKP_REDUN_SEL; + calib_redun_sel >>= BKP_REDUN_SHIFT; + + if (calib_redun_sel == BKP_SEL) { + mode = (calib[4] & CAL_SEL_0_1) >> CAL_SEL_SHIFT; + mode |= (calib[5] & CAL_SEL_2) >> CAL_SEL_SHIFT_2; + + switch (mode) { + case TWO_PT_CALIB: + base2 = (bkp[2] & BASE2_BKP_MASK) >> BASE2_BKP_SHIFT; + p2[0] = (bkp[2] & S0_P2_BKP_MASK) >> S0_P2_BKP_SHIFT; + p2[1] = (bkp[3] & S1_P2_BKP_MASK); + p2[2] = (bkp[3] & S2_P2_BKP_MASK) >> S2_P2_BKP_SHIFT; + p2[3] = (bkp[3] & S3_P2_BKP_MASK) >> S3_P2_BKP_SHIFT; + p2[4] = (bkp[3] & S4_P2_BKP_MASK) >> S4_P2_BKP_SHIFT; + p2[5] = (calib[4] & S5_P2_BKP_MASK) >> S5_P2_BKP_SHIFT; + p2[6] = (calib[5] & S6_P2_BKP_MASK); + p2[7] = (calib[5] & S7_P2_BKP_MASK) >> S7_P2_BKP_SHIFT; + p2[8] = (calib[5] & S8_P2_BKP_MASK) >> S8_P2_BKP_SHIFT; + p2[9] = (calib[5] & S9_P2_BKP_MASK) >> S9_P2_BKP_SHIFT; + p2[10] = (calib[5] & S10_P2_BKP_MASK) >> S10_P2_BKP_SHIFT; + fallthrough; + case ONE_PT_CALIB: + case ONE_PT_CALIB2: + base1 = bkp[0] & BASE1_MASK; + p1[0] = (bkp[0] & S0_P1_MASK) >> S0_P1_SHIFT; + p1[1] = (bkp[0] & S1_P1_MASK) >> S1_P1_SHIFT; + p1[2] = (bkp[0] & S2_P1_MASK) >> S2_P1_SHIFT; + p1[3] = (bkp[0] & S3_P1_MASK) >> S3_P1_SHIFT; + p1[4] = (bkp[1] & S4_P1_MASK); + p1[5] = (bkp[1] & S5_P1_MASK) >> S5_P1_SHIFT; + p1[6] = (bkp[1] & S6_P1_MASK) >> S6_P1_SHIFT; + p1[7] = (bkp[1] & S7_P1_MASK) >> S7_P1_SHIFT; + p1[8] = (bkp[2] & S8_P1_MASK_BKP) >> S8_P1_SHIFT; + p1[9] = (bkp[2] & S9_P1_MASK_BKP) >> S9_P1_BKP_SHIFT; + p1[10] = (bkp[2] & S10_P1_MASK_BKP) >> S10_P1_BKP_SHIFT; + break; + } + } else { + mode = (calib[1] & CAL_SEL_0_1) >> CAL_SEL_SHIFT; + mode |= (calib[3] & CAL_SEL_2) >> CAL_SEL_SHIFT_2; + + switch (mode) { + case TWO_PT_CALIB: + base2 = (calib[2] & BASE2_MASK) >> BASE2_SHIFT; + p2[0] = (calib[2] & S0_P2_MASK) >> S0_P2_SHIFT; + p2[1] = (calib[2] & S1_P2_MASK) >> S1_P2_SHIFT; + p2[2] = (calib[3] & S2_P2_MASK); + p2[3] = (calib[3] & S3_P2_MASK) >> S3_P2_SHIFT; + p2[4] = (calib[3] & S4_P2_MASK) >> S4_P2_SHIFT; + p2[5] = (calib[3] & S5_P2_MASK) >> S5_P2_SHIFT; + p2[6] = (calib[3] & S6_P2_MASK) >> S6_P2_SHIFT; + p2[7] = (calib[4] & S7_P2_MASK); + p2[8] = (calib[4] & S8_P2_MASK) >> S8_P2_SHIFT; + p2[9] = (calib[4] & S9_P2_MASK) >> S9_P2_SHIFT; + p2[10] = (calib[4] & S10_P2_MASK) >> S10_P2_SHIFT; + fallthrough; + case ONE_PT_CALIB: + case ONE_PT_CALIB2: + base1 = calib[0] & BASE1_MASK; + p1[0] = (calib[0] & S0_P1_MASK) >> S0_P1_SHIFT; + p1[1] = (calib[0] & S1_P1_MASK) >> S1_P1_SHIFT; + p1[2] = (calib[0] & S2_P1_MASK) >> S2_P1_SHIFT; + p1[3] = (calib[0] & S3_P1_MASK) >> S3_P1_SHIFT; + p1[4] = (calib[1] & S4_P1_MASK); + p1[5] = (calib[1] & S5_P1_MASK) >> S5_P1_SHIFT; + p1[6] = (calib[1] & S6_P1_MASK) >> S6_P1_SHIFT; + p1[7] = (calib[1] & S7_P1_MASK) >> S7_P1_SHIFT; + p1[8] = (calib[1] & S8_P1_MASK) >> S8_P1_SHIFT; + p1[9] = (calib[2] & S9_P1_MASK); + p1[10] = (calib[2] & S10_P1_MASK) >> S10_P1_SHIFT; + break; + } + } + + switch (mode) { + case ONE_PT_CALIB: + for (i = 0; i < priv->num_sensors; i++) + p1[i] += (base1 << 2) | BIT_APPEND; + break; + case TWO_PT_CALIB: + for (i = 0; i < priv->num_sensors; i++) { + p2[i] += base2; + p2[i] <<= 2; + p2[i] |= BIT_APPEND; + } + fallthrough; + case ONE_PT_CALIB2: + for (i = 0; i < priv->num_sensors; i++) { + p1[i] += base1; + p1[i] <<= 2; + p1[i] |= BIT_APPEND; + } + break; + default: + for (i = 0; i < priv->num_sensors; i++) + p2[i] = 780; + p1[0] = 502; + p1[1] = 509; + p1[2] = 503; + p1[3] = 509; + p1[4] = 505; + p1[5] = 509; + p1[6] = 507; + p1[7] = 510; + p1[8] = 508; + p1[9] = 509; + p1[10] = 508; + break; + } + + compute_intercept_slope(priv, p1, p2, mode); + kfree(calib); + kfree(bkp); + + return 0; +} + +static int calibrate_9607(struct tsens_priv *priv) +{ + int base, i; + u32 p1[5], p2[5]; + int mode = 0; + u32 *qfprom_cdata; + + qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib"); + if (IS_ERR(qfprom_cdata)) + return PTR_ERR(qfprom_cdata); + + mode = (qfprom_cdata[2] & MDM9607_CAL_SEL_MASK) >> MDM9607_CAL_SEL_SHIFT; + dev_dbg(priv->dev, "calibration mode is %d\n", mode); + + switch (mode) { + case TWO_PT_CALIB: + base = (qfprom_cdata[2] & MDM9607_BASE1_MASK) >> MDM9607_BASE1_SHIFT; + p2[0] = (qfprom_cdata[0] & MDM9607_S0_P2_MASK) >> MDM9607_S0_P2_SHIFT; + p2[1] = (qfprom_cdata[0] & MDM9607_S1_P2_MASK) >> MDM9607_S1_P2_SHIFT; + p2[2] = (qfprom_cdata[1] & MDM9607_S2_P2_MASK) >> MDM9607_S2_P2_SHIFT; + p2[3] = (qfprom_cdata[1] & MDM9607_S3_P2_MASK) >> MDM9607_S3_P2_SHIFT; + p2[4] = (qfprom_cdata[2] & MDM9607_S4_P2_MASK) >> MDM9607_S4_P2_SHIFT; + for (i = 0; i < priv->num_sensors; i++) + p2[i] = ((base + p2[i]) << 2); + fallthrough; + case ONE_PT_CALIB2: + base = (qfprom_cdata[0] & MDM9607_BASE0_MASK); + p1[0] = (qfprom_cdata[0] & MDM9607_S0_P1_MASK) >> MDM9607_S0_P1_SHIFT; + p1[1] = (qfprom_cdata[0] & MDM9607_S1_P1_MASK) >> MDM9607_S1_P1_SHIFT; + p1[2] = (qfprom_cdata[1] & MDM9607_S2_P1_MASK) >> MDM9607_S2_P1_SHIFT; + p1[3] = (qfprom_cdata[1] & MDM9607_S3_P1_MASK) >> MDM9607_S3_P1_SHIFT; + p1[4] = (qfprom_cdata[2] & MDM9607_S4_P1_MASK) >> MDM9607_S4_P1_SHIFT; + for (i = 0; i < priv->num_sensors; i++) + p1[i] = ((base + p1[i]) << 2); + break; + default: + for (i = 0; i < priv->num_sensors; i++) { + p1[i] = 500; + p2[i] = 780; + } + break; + } + + compute_intercept_slope(priv, p1, p2, mode); + kfree(qfprom_cdata); + + return 0; +} + +static int __init init_8939(struct tsens_priv *priv) { + priv->sensor[0].slope = 2911; + priv->sensor[1].slope = 2789; + priv->sensor[2].slope = 2906; + priv->sensor[3].slope = 2763; + priv->sensor[4].slope = 2922; + priv->sensor[5].slope = 2867; + priv->sensor[6].slope = 2833; + priv->sensor[7].slope = 2838; + priv->sensor[8].slope = 2840; + /* priv->sensor[9].slope = 2852; */ + + return init_common(priv); +} + +/* v0.1: 8916, 8939, 8974, 9607 */ + +static struct tsens_features tsens_v0_1_feat = { + .ver_major = VER_0_1, + .crit_int = 0, + .adc = 1, + .srot_split = 1, + .max_sensors = 11, +}; + +static const struct reg_field tsens_v0_1_regfields[MAX_REGFIELDS] = { + /* ----- SROT ------ */ + /* No VERSION information */ + + /* CTRL_OFFSET */ + [TSENS_EN] = REG_FIELD(SROT_CTRL_OFF, 0, 0), + [TSENS_SW_RST] = REG_FIELD(SROT_CTRL_OFF, 1, 1), + + /* ----- TM ------ */ + /* INTERRUPT ENABLE */ + [INT_EN] = REG_FIELD(TM_INT_EN_OFF, 0, 0), + + /* UPPER/LOWER TEMPERATURE THRESHOLDS */ + REG_FIELD_FOR_EACH_SENSOR11(LOW_THRESH, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 0, 9), + REG_FIELD_FOR_EACH_SENSOR11(UP_THRESH, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 10, 19), + + /* UPPER/LOWER INTERRUPTS [CLEAR/STATUS] */ + REG_FIELD_FOR_EACH_SENSOR11(LOW_INT_CLEAR, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 20, 20), + REG_FIELD_FOR_EACH_SENSOR11(UP_INT_CLEAR, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 21, 21), + + /* NO CRITICAL INTERRUPT SUPPORT on v0.1 */ + + /* Sn_STATUS */ + REG_FIELD_FOR_EACH_SENSOR11(LAST_TEMP, TM_Sn_STATUS_OFF, 0, 9), + /* No VALID field on v0.1 */ + /* xxx_STATUS bits: 1 == threshold violated */ + REG_FIELD_FOR_EACH_SENSOR11(MIN_STATUS, TM_Sn_STATUS_OFF, 10, 10), + REG_FIELD_FOR_EACH_SENSOR11(LOWER_STATUS, TM_Sn_STATUS_OFF, 11, 11), + REG_FIELD_FOR_EACH_SENSOR11(UPPER_STATUS, TM_Sn_STATUS_OFF, 12, 12), + /* No CRITICAL field on v0.1 */ + REG_FIELD_FOR_EACH_SENSOR11(MAX_STATUS, TM_Sn_STATUS_OFF, 13, 13), + + /* TRDY: 1=ready, 0=in progress */ + [TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0), +}; + +static const struct tsens_ops ops_8916 = { + .init = init_common, + .calibrate = calibrate_8916, + .get_temp = get_temp_common, +}; + +struct tsens_plat_data data_8916 = { + .num_sensors = 5, + .ops = &ops_8916, + .hw_ids = (unsigned int []){0, 1, 2, 4, 5 }, + + .feat = &tsens_v0_1_feat, + .fields = tsens_v0_1_regfields, +}; + +static const struct tsens_ops ops_8939 = { + .init = init_8939, + .calibrate = calibrate_8939, + .get_temp = get_temp_common, +}; + +struct tsens_plat_data data_8939 = { + .num_sensors = 9, + .ops = &ops_8939, + .hw_ids = (unsigned int []){ 0, 1, 2, 3, 5, 6, 7, 8, 9, /* 10 */ }, + + .feat = &tsens_v0_1_feat, + .fields = tsens_v0_1_regfields, +}; + +static const struct tsens_ops ops_8974 = { + .init = init_common, + .calibrate = calibrate_8974, + .get_temp = get_temp_common, +}; + +struct tsens_plat_data data_8974 = { + .num_sensors = 11, + .ops = &ops_8974, + .feat = &tsens_v0_1_feat, + .fields = tsens_v0_1_regfields, +}; + +static const struct tsens_ops ops_9607 = { + .init = init_common, + .calibrate = calibrate_9607, + .get_temp = get_temp_common, +}; + +struct tsens_plat_data data_9607 = { + .num_sensors = 5, + .ops = &ops_9607, + .hw_ids = (unsigned int []){ 0, 1, 2, 3, 4 }, + .feat = &tsens_v0_1_feat, + .fields = tsens_v0_1_regfields, +}; diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c new file mode 100644 index 000000000..faa4576fa --- /dev/null +++ b/drivers/thermal/qcom/tsens-v1.c @@ -0,0 +1,389 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019, Linaro Limited + */ + +#include <linux/bitops.h> +#include <linux/regmap.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include "tsens.h" + +/* ----- SROT ------ */ +#define SROT_HW_VER_OFF 0x0000 +#define SROT_CTRL_OFF 0x0004 + +/* ----- TM ------ */ +#define TM_INT_EN_OFF 0x0000 +#define TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF 0x0004 +#define TM_Sn_STATUS_OFF 0x0044 +#define TM_TRDY_OFF 0x0084 +#define TM_HIGH_LOW_INT_STATUS_OFF 0x0088 +#define TM_HIGH_LOW_Sn_INT_THRESHOLD_OFF 0x0090 + +/* eeprom layout data for msm8956/76 (v1) */ +#define MSM8976_BASE0_MASK 0xff +#define MSM8976_BASE1_MASK 0xff +#define MSM8976_BASE1_SHIFT 8 + +#define MSM8976_S0_P1_MASK 0x3f00 +#define MSM8976_S1_P1_MASK 0x3f00000 +#define MSM8976_S2_P1_MASK 0x3f +#define MSM8976_S3_P1_MASK 0x3f000 +#define MSM8976_S4_P1_MASK 0x3f00 +#define MSM8976_S5_P1_MASK 0x3f00000 +#define MSM8976_S6_P1_MASK 0x3f +#define MSM8976_S7_P1_MASK 0x3f000 +#define MSM8976_S8_P1_MASK 0x1f8 +#define MSM8976_S9_P1_MASK 0x1f8000 +#define MSM8976_S10_P1_MASK 0xf8000000 +#define MSM8976_S10_P1_MASK_1 0x1 + +#define MSM8976_S0_P2_MASK 0xfc000 +#define MSM8976_S1_P2_MASK 0xfc000000 +#define MSM8976_S2_P2_MASK 0xfc0 +#define MSM8976_S3_P2_MASK 0xfc0000 +#define MSM8976_S4_P2_MASK 0xfc000 +#define MSM8976_S5_P2_MASK 0xfc000000 +#define MSM8976_S6_P2_MASK 0xfc0 +#define MSM8976_S7_P2_MASK 0xfc0000 +#define MSM8976_S8_P2_MASK 0x7e00 +#define MSM8976_S9_P2_MASK 0x7e00000 +#define MSM8976_S10_P2_MASK 0x7e + +#define MSM8976_S0_P1_SHIFT 8 +#define MSM8976_S1_P1_SHIFT 20 +#define MSM8976_S2_P1_SHIFT 0 +#define MSM8976_S3_P1_SHIFT 12 +#define MSM8976_S4_P1_SHIFT 8 +#define MSM8976_S5_P1_SHIFT 20 +#define MSM8976_S6_P1_SHIFT 0 +#define MSM8976_S7_P1_SHIFT 12 +#define MSM8976_S8_P1_SHIFT 3 +#define MSM8976_S9_P1_SHIFT 15 +#define MSM8976_S10_P1_SHIFT 27 +#define MSM8976_S10_P1_SHIFT_1 0 + +#define MSM8976_S0_P2_SHIFT 14 +#define MSM8976_S1_P2_SHIFT 26 +#define MSM8976_S2_P2_SHIFT 6 +#define MSM8976_S3_P2_SHIFT 18 +#define MSM8976_S4_P2_SHIFT 14 +#define MSM8976_S5_P2_SHIFT 26 +#define MSM8976_S6_P2_SHIFT 6 +#define MSM8976_S7_P2_SHIFT 18 +#define MSM8976_S8_P2_SHIFT 9 +#define MSM8976_S9_P2_SHIFT 21 +#define MSM8976_S10_P2_SHIFT 1 + +#define MSM8976_CAL_SEL_MASK 0x3 + +/* eeprom layout data for qcs404/405 (v1) */ +#define BASE0_MASK 0x000007f8 +#define BASE1_MASK 0x0007f800 +#define BASE0_SHIFT 3 +#define BASE1_SHIFT 11 + +#define S0_P1_MASK 0x0000003f +#define S1_P1_MASK 0x0003f000 +#define S2_P1_MASK 0x3f000000 +#define S3_P1_MASK 0x000003f0 +#define S4_P1_MASK 0x003f0000 +#define S5_P1_MASK 0x0000003f +#define S6_P1_MASK 0x0003f000 +#define S7_P1_MASK 0x3f000000 +#define S8_P1_MASK 0x000003f0 +#define S9_P1_MASK 0x003f0000 + +#define S0_P2_MASK 0x00000fc0 +#define S1_P2_MASK 0x00fc0000 +#define S2_P2_MASK_1_0 0xc0000000 +#define S2_P2_MASK_5_2 0x0000000f +#define S3_P2_MASK 0x0000fc00 +#define S4_P2_MASK 0x0fc00000 +#define S5_P2_MASK 0x00000fc0 +#define S6_P2_MASK 0x00fc0000 +#define S7_P2_MASK_1_0 0xc0000000 +#define S7_P2_MASK_5_2 0x0000000f +#define S8_P2_MASK 0x0000fc00 +#define S9_P2_MASK 0x0fc00000 + +#define S0_P1_SHIFT 0 +#define S0_P2_SHIFT 6 +#define S1_P1_SHIFT 12 +#define S1_P2_SHIFT 18 +#define S2_P1_SHIFT 24 +#define S2_P2_SHIFT_1_0 30 + +#define S2_P2_SHIFT_5_2 0 +#define S3_P1_SHIFT 4 +#define S3_P2_SHIFT 10 +#define S4_P1_SHIFT 16 +#define S4_P2_SHIFT 22 + +#define S5_P1_SHIFT 0 +#define S5_P2_SHIFT 6 +#define S6_P1_SHIFT 12 +#define S6_P2_SHIFT 18 +#define S7_P1_SHIFT 24 +#define S7_P2_SHIFT_1_0 30 + +#define S7_P2_SHIFT_5_2 0 +#define S8_P1_SHIFT 4 +#define S8_P2_SHIFT 10 +#define S9_P1_SHIFT 16 +#define S9_P2_SHIFT 22 + +#define CAL_SEL_MASK 7 +#define CAL_SEL_SHIFT 0 + +static int calibrate_v1(struct tsens_priv *priv) +{ + u32 base0 = 0, base1 = 0; + u32 p1[10], p2[10]; + u32 mode = 0, lsb = 0, msb = 0; + u32 *qfprom_cdata; + int i; + + qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib"); + if (IS_ERR(qfprom_cdata)) + return PTR_ERR(qfprom_cdata); + + mode = (qfprom_cdata[4] & CAL_SEL_MASK) >> CAL_SEL_SHIFT; + dev_dbg(priv->dev, "calibration mode is %d\n", mode); + + switch (mode) { + case TWO_PT_CALIB: + base1 = (qfprom_cdata[4] & BASE1_MASK) >> BASE1_SHIFT; + p2[0] = (qfprom_cdata[0] & S0_P2_MASK) >> S0_P2_SHIFT; + p2[1] = (qfprom_cdata[0] & S1_P2_MASK) >> S1_P2_SHIFT; + /* This value is split over two registers, 2 bits and 4 bits */ + lsb = (qfprom_cdata[0] & S2_P2_MASK_1_0) >> S2_P2_SHIFT_1_0; + msb = (qfprom_cdata[1] & S2_P2_MASK_5_2) >> S2_P2_SHIFT_5_2; + p2[2] = msb << 2 | lsb; + p2[3] = (qfprom_cdata[1] & S3_P2_MASK) >> S3_P2_SHIFT; + p2[4] = (qfprom_cdata[1] & S4_P2_MASK) >> S4_P2_SHIFT; + p2[5] = (qfprom_cdata[2] & S5_P2_MASK) >> S5_P2_SHIFT; + p2[6] = (qfprom_cdata[2] & S6_P2_MASK) >> S6_P2_SHIFT; + /* This value is split over two registers, 2 bits and 4 bits */ + lsb = (qfprom_cdata[2] & S7_P2_MASK_1_0) >> S7_P2_SHIFT_1_0; + msb = (qfprom_cdata[3] & S7_P2_MASK_5_2) >> S7_P2_SHIFT_5_2; + p2[7] = msb << 2 | lsb; + p2[8] = (qfprom_cdata[3] & S8_P2_MASK) >> S8_P2_SHIFT; + p2[9] = (qfprom_cdata[3] & S9_P2_MASK) >> S9_P2_SHIFT; + for (i = 0; i < priv->num_sensors; i++) + p2[i] = ((base1 + p2[i]) << 2); + fallthrough; + case ONE_PT_CALIB2: + base0 = (qfprom_cdata[4] & BASE0_MASK) >> BASE0_SHIFT; + p1[0] = (qfprom_cdata[0] & S0_P1_MASK) >> S0_P1_SHIFT; + p1[1] = (qfprom_cdata[0] & S1_P1_MASK) >> S1_P1_SHIFT; + p1[2] = (qfprom_cdata[0] & S2_P1_MASK) >> S2_P1_SHIFT; + p1[3] = (qfprom_cdata[1] & S3_P1_MASK) >> S3_P1_SHIFT; + p1[4] = (qfprom_cdata[1] & S4_P1_MASK) >> S4_P1_SHIFT; + p1[5] = (qfprom_cdata[2] & S5_P1_MASK) >> S5_P1_SHIFT; + p1[6] = (qfprom_cdata[2] & S6_P1_MASK) >> S6_P1_SHIFT; + p1[7] = (qfprom_cdata[2] & S7_P1_MASK) >> S7_P1_SHIFT; + p1[8] = (qfprom_cdata[3] & S8_P1_MASK) >> S8_P1_SHIFT; + p1[9] = (qfprom_cdata[3] & S9_P1_MASK) >> S9_P1_SHIFT; + for (i = 0; i < priv->num_sensors; i++) + p1[i] = (((base0) + p1[i]) << 2); + break; + default: + for (i = 0; i < priv->num_sensors; i++) { + p1[i] = 500; + p2[i] = 780; + } + break; + } + + compute_intercept_slope(priv, p1, p2, mode); + kfree(qfprom_cdata); + + return 0; +} + +static int calibrate_8976(struct tsens_priv *priv) +{ + int base0 = 0, base1 = 0, i; + u32 p1[11], p2[11]; + int mode = 0, tmp = 0; + u32 *qfprom_cdata; + + qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib"); + if (IS_ERR(qfprom_cdata)) + return PTR_ERR(qfprom_cdata); + + mode = (qfprom_cdata[4] & MSM8976_CAL_SEL_MASK); + dev_dbg(priv->dev, "calibration mode is %d\n", mode); + + switch (mode) { + case TWO_PT_CALIB: + base1 = (qfprom_cdata[2] & MSM8976_BASE1_MASK) >> MSM8976_BASE1_SHIFT; + p2[0] = (qfprom_cdata[0] & MSM8976_S0_P2_MASK) >> MSM8976_S0_P2_SHIFT; + p2[1] = (qfprom_cdata[0] & MSM8976_S1_P2_MASK) >> MSM8976_S1_P2_SHIFT; + p2[2] = (qfprom_cdata[1] & MSM8976_S2_P2_MASK) >> MSM8976_S2_P2_SHIFT; + p2[3] = (qfprom_cdata[1] & MSM8976_S3_P2_MASK) >> MSM8976_S3_P2_SHIFT; + p2[4] = (qfprom_cdata[2] & MSM8976_S4_P2_MASK) >> MSM8976_S4_P2_SHIFT; + p2[5] = (qfprom_cdata[2] & MSM8976_S5_P2_MASK) >> MSM8976_S5_P2_SHIFT; + p2[6] = (qfprom_cdata[3] & MSM8976_S6_P2_MASK) >> MSM8976_S6_P2_SHIFT; + p2[7] = (qfprom_cdata[3] & MSM8976_S7_P2_MASK) >> MSM8976_S7_P2_SHIFT; + p2[8] = (qfprom_cdata[4] & MSM8976_S8_P2_MASK) >> MSM8976_S8_P2_SHIFT; + p2[9] = (qfprom_cdata[4] & MSM8976_S9_P2_MASK) >> MSM8976_S9_P2_SHIFT; + p2[10] = (qfprom_cdata[5] & MSM8976_S10_P2_MASK) >> MSM8976_S10_P2_SHIFT; + + for (i = 0; i < priv->num_sensors; i++) + p2[i] = ((base1 + p2[i]) << 2); + fallthrough; + case ONE_PT_CALIB2: + base0 = qfprom_cdata[0] & MSM8976_BASE0_MASK; + p1[0] = (qfprom_cdata[0] & MSM8976_S0_P1_MASK) >> MSM8976_S0_P1_SHIFT; + p1[1] = (qfprom_cdata[0] & MSM8976_S1_P1_MASK) >> MSM8976_S1_P1_SHIFT; + p1[2] = (qfprom_cdata[1] & MSM8976_S2_P1_MASK) >> MSM8976_S2_P1_SHIFT; + p1[3] = (qfprom_cdata[1] & MSM8976_S3_P1_MASK) >> MSM8976_S3_P1_SHIFT; + p1[4] = (qfprom_cdata[2] & MSM8976_S4_P1_MASK) >> MSM8976_S4_P1_SHIFT; + p1[5] = (qfprom_cdata[2] & MSM8976_S5_P1_MASK) >> MSM8976_S5_P1_SHIFT; + p1[6] = (qfprom_cdata[3] & MSM8976_S6_P1_MASK) >> MSM8976_S6_P1_SHIFT; + p1[7] = (qfprom_cdata[3] & MSM8976_S7_P1_MASK) >> MSM8976_S7_P1_SHIFT; + p1[8] = (qfprom_cdata[4] & MSM8976_S8_P1_MASK) >> MSM8976_S8_P1_SHIFT; + p1[9] = (qfprom_cdata[4] & MSM8976_S9_P1_MASK) >> MSM8976_S9_P1_SHIFT; + p1[10] = (qfprom_cdata[4] & MSM8976_S10_P1_MASK) >> MSM8976_S10_P1_SHIFT; + tmp = (qfprom_cdata[5] & MSM8976_S10_P1_MASK_1) << MSM8976_S10_P1_SHIFT_1; + p1[10] |= tmp; + + for (i = 0; i < priv->num_sensors; i++) + p1[i] = (((base0) + p1[i]) << 2); + break; + default: + for (i = 0; i < priv->num_sensors; i++) { + p1[i] = 500; + p2[i] = 780; + } + break; + } + + compute_intercept_slope(priv, p1, p2, mode); + kfree(qfprom_cdata); + + return 0; +} + +/* v1.x: msm8956,8976,qcs404,405 */ + +static struct tsens_features tsens_v1_feat = { + .ver_major = VER_1_X, + .crit_int = 0, + .adc = 1, + .srot_split = 1, + .max_sensors = 11, +}; + +static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = { + /* ----- SROT ------ */ + /* VERSION */ + [VER_MAJOR] = REG_FIELD(SROT_HW_VER_OFF, 28, 31), + [VER_MINOR] = REG_FIELD(SROT_HW_VER_OFF, 16, 27), + [VER_STEP] = REG_FIELD(SROT_HW_VER_OFF, 0, 15), + /* CTRL_OFFSET */ + [TSENS_EN] = REG_FIELD(SROT_CTRL_OFF, 0, 0), + [TSENS_SW_RST] = REG_FIELD(SROT_CTRL_OFF, 1, 1), + [SENSOR_EN] = REG_FIELD(SROT_CTRL_OFF, 3, 13), + + /* ----- TM ------ */ + /* INTERRUPT ENABLE */ + [INT_EN] = REG_FIELD(TM_INT_EN_OFF, 0, 0), + + /* UPPER/LOWER TEMPERATURE THRESHOLDS */ + REG_FIELD_FOR_EACH_SENSOR11(LOW_THRESH, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 0, 9), + REG_FIELD_FOR_EACH_SENSOR11(UP_THRESH, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 10, 19), + + /* UPPER/LOWER INTERRUPTS [CLEAR/STATUS] */ + REG_FIELD_FOR_EACH_SENSOR11(LOW_INT_CLEAR, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 20, 20), + REG_FIELD_FOR_EACH_SENSOR11(UP_INT_CLEAR, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 21, 21), + [LOW_INT_STATUS_0] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 0, 0), + [LOW_INT_STATUS_1] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 1, 1), + [LOW_INT_STATUS_2] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 2, 2), + [LOW_INT_STATUS_3] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 3, 3), + [LOW_INT_STATUS_4] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 4, 4), + [LOW_INT_STATUS_5] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 5, 5), + [LOW_INT_STATUS_6] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 6, 6), + [LOW_INT_STATUS_7] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 7, 7), + [UP_INT_STATUS_0] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 8, 8), + [UP_INT_STATUS_1] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 9, 9), + [UP_INT_STATUS_2] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 10, 10), + [UP_INT_STATUS_3] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 11, 11), + [UP_INT_STATUS_4] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 12, 12), + [UP_INT_STATUS_5] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 13, 13), + [UP_INT_STATUS_6] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 14, 14), + [UP_INT_STATUS_7] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 15, 15), + + /* NO CRITICAL INTERRUPT SUPPORT on v1 */ + + /* Sn_STATUS */ + REG_FIELD_FOR_EACH_SENSOR11(LAST_TEMP, TM_Sn_STATUS_OFF, 0, 9), + REG_FIELD_FOR_EACH_SENSOR11(VALID, TM_Sn_STATUS_OFF, 14, 14), + /* xxx_STATUS bits: 1 == threshold violated */ + REG_FIELD_FOR_EACH_SENSOR11(MIN_STATUS, TM_Sn_STATUS_OFF, 10, 10), + REG_FIELD_FOR_EACH_SENSOR11(LOWER_STATUS, TM_Sn_STATUS_OFF, 11, 11), + REG_FIELD_FOR_EACH_SENSOR11(UPPER_STATUS, TM_Sn_STATUS_OFF, 12, 12), + /* No CRITICAL field on v1.x */ + REG_FIELD_FOR_EACH_SENSOR11(MAX_STATUS, TM_Sn_STATUS_OFF, 13, 13), + + /* TRDY: 1=ready, 0=in progress */ + [TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0), +}; + +static int __init init_8956(struct tsens_priv *priv) { + priv->sensor[0].slope = 3313; + priv->sensor[1].slope = 3275; + priv->sensor[2].slope = 3320; + priv->sensor[3].slope = 3246; + priv->sensor[4].slope = 3279; + priv->sensor[5].slope = 3257; + priv->sensor[6].slope = 3234; + priv->sensor[7].slope = 3269; + priv->sensor[8].slope = 3255; + priv->sensor[9].slope = 3239; + priv->sensor[10].slope = 3286; + + return init_common(priv); +} + +static const struct tsens_ops ops_generic_v1 = { + .init = init_common, + .calibrate = calibrate_v1, + .get_temp = get_temp_tsens_valid, +}; + +struct tsens_plat_data data_tsens_v1 = { + .ops = &ops_generic_v1, + .feat = &tsens_v1_feat, + .fields = tsens_v1_regfields, +}; + +static const struct tsens_ops ops_8956 = { + .init = init_8956, + .calibrate = calibrate_8976, + .get_temp = get_temp_tsens_valid, +}; + +struct tsens_plat_data data_8956 = { + .num_sensors = 11, + .ops = &ops_8956, + .feat = &tsens_v1_feat, + .fields = tsens_v1_regfields, +}; + +static const struct tsens_ops ops_8976 = { + .init = init_common, + .calibrate = calibrate_8976, + .get_temp = get_temp_tsens_valid, +}; + +struct tsens_plat_data data_8976 = { + .num_sensors = 11, + .ops = &ops_8976, + .hw_ids = (unsigned int[]){0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10}, + .feat = &tsens_v1_feat, + .fields = tsens_v1_regfields, +}; diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c new file mode 100644 index 000000000..b293ed321 --- /dev/null +++ b/drivers/thermal/qcom/tsens-v2.c @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2018, Linaro Limited + */ + +#include <linux/bitops.h> +#include <linux/regmap.h> +#include "tsens.h" + +/* ----- SROT ------ */ +#define SROT_HW_VER_OFF 0x0000 +#define SROT_CTRL_OFF 0x0004 + +/* ----- TM ------ */ +#define TM_INT_EN_OFF 0x0004 +#define TM_UPPER_LOWER_INT_STATUS_OFF 0x0008 +#define TM_UPPER_LOWER_INT_CLEAR_OFF 0x000c +#define TM_UPPER_LOWER_INT_MASK_OFF 0x0010 +#define TM_CRITICAL_INT_STATUS_OFF 0x0014 +#define TM_CRITICAL_INT_CLEAR_OFF 0x0018 +#define TM_CRITICAL_INT_MASK_OFF 0x001c +#define TM_Sn_UPPER_LOWER_THRESHOLD_OFF 0x0020 +#define TM_Sn_CRITICAL_THRESHOLD_OFF 0x0060 +#define TM_Sn_STATUS_OFF 0x00a0 +#define TM_TRDY_OFF 0x00e4 +#define TM_WDOG_LOG_OFF 0x013c + +/* v2.x: 8996, 8998, sdm845 */ + +static struct tsens_features tsens_v2_feat = { + .ver_major = VER_2_X, + .crit_int = 1, + .adc = 0, + .srot_split = 1, + .max_sensors = 16, +}; + +static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = { + /* ----- SROT ------ */ + /* VERSION */ + [VER_MAJOR] = REG_FIELD(SROT_HW_VER_OFF, 28, 31), + [VER_MINOR] = REG_FIELD(SROT_HW_VER_OFF, 16, 27), + [VER_STEP] = REG_FIELD(SROT_HW_VER_OFF, 0, 15), + /* CTRL_OFF */ + [TSENS_EN] = REG_FIELD(SROT_CTRL_OFF, 0, 0), + [TSENS_SW_RST] = REG_FIELD(SROT_CTRL_OFF, 1, 1), + + /* ----- TM ------ */ + /* INTERRUPT ENABLE */ + /* v2 has separate enables for UPPER/LOWER/CRITICAL interrupts */ + [INT_EN] = REG_FIELD(TM_INT_EN_OFF, 0, 2), + + /* TEMPERATURE THRESHOLDS */ + REG_FIELD_FOR_EACH_SENSOR16(LOW_THRESH, TM_Sn_UPPER_LOWER_THRESHOLD_OFF, 0, 11), + REG_FIELD_FOR_EACH_SENSOR16(UP_THRESH, TM_Sn_UPPER_LOWER_THRESHOLD_OFF, 12, 23), + REG_FIELD_FOR_EACH_SENSOR16(CRIT_THRESH, TM_Sn_CRITICAL_THRESHOLD_OFF, 0, 11), + + /* INTERRUPTS [CLEAR/STATUS/MASK] */ + REG_FIELD_SPLIT_BITS_0_15(LOW_INT_STATUS, TM_UPPER_LOWER_INT_STATUS_OFF), + REG_FIELD_SPLIT_BITS_0_15(LOW_INT_CLEAR, TM_UPPER_LOWER_INT_CLEAR_OFF), + REG_FIELD_SPLIT_BITS_0_15(LOW_INT_MASK, TM_UPPER_LOWER_INT_MASK_OFF), + REG_FIELD_SPLIT_BITS_16_31(UP_INT_STATUS, TM_UPPER_LOWER_INT_STATUS_OFF), + REG_FIELD_SPLIT_BITS_16_31(UP_INT_CLEAR, TM_UPPER_LOWER_INT_CLEAR_OFF), + REG_FIELD_SPLIT_BITS_16_31(UP_INT_MASK, TM_UPPER_LOWER_INT_MASK_OFF), + REG_FIELD_SPLIT_BITS_0_15(CRIT_INT_STATUS, TM_CRITICAL_INT_STATUS_OFF), + REG_FIELD_SPLIT_BITS_0_15(CRIT_INT_CLEAR, TM_CRITICAL_INT_CLEAR_OFF), + REG_FIELD_SPLIT_BITS_0_15(CRIT_INT_MASK, TM_CRITICAL_INT_MASK_OFF), + + /* WATCHDOG on v2.3 or later */ + [WDOG_BARK_STATUS] = REG_FIELD(TM_CRITICAL_INT_STATUS_OFF, 31, 31), + [WDOG_BARK_CLEAR] = REG_FIELD(TM_CRITICAL_INT_CLEAR_OFF, 31, 31), + [WDOG_BARK_MASK] = REG_FIELD(TM_CRITICAL_INT_MASK_OFF, 31, 31), + [CC_MON_STATUS] = REG_FIELD(TM_CRITICAL_INT_STATUS_OFF, 30, 30), + [CC_MON_CLEAR] = REG_FIELD(TM_CRITICAL_INT_CLEAR_OFF, 30, 30), + [CC_MON_MASK] = REG_FIELD(TM_CRITICAL_INT_MASK_OFF, 30, 30), + [WDOG_BARK_COUNT] = REG_FIELD(TM_WDOG_LOG_OFF, 0, 7), + + /* Sn_STATUS */ + REG_FIELD_FOR_EACH_SENSOR16(LAST_TEMP, TM_Sn_STATUS_OFF, 0, 11), + REG_FIELD_FOR_EACH_SENSOR16(VALID, TM_Sn_STATUS_OFF, 21, 21), + /* xxx_STATUS bits: 1 == threshold violated */ + REG_FIELD_FOR_EACH_SENSOR16(MIN_STATUS, TM_Sn_STATUS_OFF, 16, 16), + REG_FIELD_FOR_EACH_SENSOR16(LOWER_STATUS, TM_Sn_STATUS_OFF, 17, 17), + REG_FIELD_FOR_EACH_SENSOR16(UPPER_STATUS, TM_Sn_STATUS_OFF, 18, 18), + REG_FIELD_FOR_EACH_SENSOR16(CRITICAL_STATUS, TM_Sn_STATUS_OFF, 19, 19), + REG_FIELD_FOR_EACH_SENSOR16(MAX_STATUS, TM_Sn_STATUS_OFF, 20, 20), + + /* TRDY: 1=ready, 0=in progress */ + [TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0), +}; + +static const struct tsens_ops ops_generic_v2 = { + .init = init_common, + .get_temp = get_temp_tsens_valid, +}; + +struct tsens_plat_data data_tsens_v2 = { + .ops = &ops_generic_v2, + .feat = &tsens_v2_feat, + .fields = tsens_v2_regfields, +}; + +/* Kept around for backward compatibility with old msm8996.dtsi */ +struct tsens_plat_data data_8996 = { + .num_sensors = 13, + .ops = &ops_generic_v2, + .feat = &tsens_v2_feat, + .fields = tsens_v2_regfields, +}; diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c new file mode 100644 index 000000000..252c5ffdd --- /dev/null +++ b/drivers/thermal/qcom/tsens.c @@ -0,0 +1,1187 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, 2020, Linaro Ltd. + */ + +#include <linux/debugfs.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/nvmem-consumer.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/mfd/syscon.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/thermal.h> +#include "../thermal_hwmon.h" +#include "tsens.h" + +/** + * struct tsens_irq_data - IRQ status and temperature violations + * @up_viol: upper threshold violated + * @up_thresh: upper threshold temperature value + * @up_irq_mask: mask register for upper threshold irqs + * @up_irq_clear: clear register for uppper threshold irqs + * @low_viol: lower threshold violated + * @low_thresh: lower threshold temperature value + * @low_irq_mask: mask register for lower threshold irqs + * @low_irq_clear: clear register for lower threshold irqs + * @crit_viol: critical threshold violated + * @crit_thresh: critical threshold temperature value + * @crit_irq_mask: mask register for critical threshold irqs + * @crit_irq_clear: clear register for critical threshold irqs + * + * Structure containing data about temperature threshold settings and + * irq status if they were violated. + */ +struct tsens_irq_data { + u32 up_viol; + int up_thresh; + u32 up_irq_mask; + u32 up_irq_clear; + u32 low_viol; + int low_thresh; + u32 low_irq_mask; + u32 low_irq_clear; + u32 crit_viol; + u32 crit_thresh; + u32 crit_irq_mask; + u32 crit_irq_clear; +}; + +char *qfprom_read(struct device *dev, const char *cname) +{ + struct nvmem_cell *cell; + ssize_t data; + char *ret; + + cell = nvmem_cell_get(dev, cname); + if (IS_ERR(cell)) + return ERR_CAST(cell); + + ret = nvmem_cell_read(cell, &data); + nvmem_cell_put(cell); + + return ret; +} + +/* + * Use this function on devices where slope and offset calculations + * depend on calibration data read from qfprom. On others the slope + * and offset values are derived from tz->tzp->slope and tz->tzp->offset + * resp. + */ +void compute_intercept_slope(struct tsens_priv *priv, u32 *p1, + u32 *p2, u32 mode) +{ + int i; + int num, den; + + for (i = 0; i < priv->num_sensors; i++) { + dev_dbg(priv->dev, + "%s: sensor%d - data_point1:%#x data_point2:%#x\n", + __func__, i, p1[i], p2[i]); + + if (!priv->sensor[i].slope) + priv->sensor[i].slope = SLOPE_DEFAULT; + if (mode == TWO_PT_CALIB) { + /* + * slope (m) = adc_code2 - adc_code1 (y2 - y1)/ + * temp_120_degc - temp_30_degc (x2 - x1) + */ + num = p2[i] - p1[i]; + num *= SLOPE_FACTOR; + den = CAL_DEGC_PT2 - CAL_DEGC_PT1; + priv->sensor[i].slope = num / den; + } + + priv->sensor[i].offset = (p1[i] * SLOPE_FACTOR) - + (CAL_DEGC_PT1 * + priv->sensor[i].slope); + dev_dbg(priv->dev, "%s: offset:%d\n", __func__, + priv->sensor[i].offset); + } +} + +static inline u32 degc_to_code(int degc, const struct tsens_sensor *s) +{ + u64 code = div_u64(((u64)degc * s->slope + s->offset), SLOPE_FACTOR); + + pr_debug("%s: raw_code: 0x%llx, degc:%d\n", __func__, code, degc); + return clamp_val(code, THRESHOLD_MIN_ADC_CODE, THRESHOLD_MAX_ADC_CODE); +} + +static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s) +{ + int degc, num, den; + + num = (adc_code * SLOPE_FACTOR) - s->offset; + den = s->slope; + + if (num > 0) + degc = num + (den / 2); + else if (num < 0) + degc = num - (den / 2); + else + degc = num; + + degc /= den; + + return degc; +} + +/** + * tsens_hw_to_mC - Return sign-extended temperature in mCelsius. + * @s: Pointer to sensor struct + * @field: Index into regmap_field array pointing to temperature data + * + * This function handles temperature returned in ADC code or deciCelsius + * depending on IP version. + * + * Return: Temperature in milliCelsius on success, a negative errno will + * be returned in error cases + */ +static int tsens_hw_to_mC(const struct tsens_sensor *s, int field) +{ + struct tsens_priv *priv = s->priv; + u32 resolution; + u32 temp = 0; + int ret; + + resolution = priv->fields[LAST_TEMP_0].msb - + priv->fields[LAST_TEMP_0].lsb; + + ret = regmap_field_read(priv->rf[field], &temp); + if (ret) + return ret; + + /* Convert temperature from ADC code to milliCelsius */ + if (priv->feat->adc) + return code_to_degc(temp, s) * 1000; + + /* deciCelsius -> milliCelsius along with sign extension */ + return sign_extend32(temp, resolution) * 100; +} + +/** + * tsens_mC_to_hw - Convert temperature to hardware register value + * @s: Pointer to sensor struct + * @temp: temperature in milliCelsius to be programmed to hardware + * + * This function outputs the value to be written to hardware in ADC code + * or deciCelsius depending on IP version. + * + * Return: ADC code or temperature in deciCelsius. + */ +static int tsens_mC_to_hw(const struct tsens_sensor *s, int temp) +{ + struct tsens_priv *priv = s->priv; + + /* milliC to adc code */ + if (priv->feat->adc) + return degc_to_code(temp / 1000, s); + + /* milliC to deciC */ + return temp / 100; +} + +static inline enum tsens_ver tsens_version(struct tsens_priv *priv) +{ + return priv->feat->ver_major; +} + +static void tsens_set_interrupt_v1(struct tsens_priv *priv, u32 hw_id, + enum tsens_irq_type irq_type, bool enable) +{ + u32 index = 0; + + switch (irq_type) { + case UPPER: + index = UP_INT_CLEAR_0 + hw_id; + break; + case LOWER: + index = LOW_INT_CLEAR_0 + hw_id; + break; + case CRITICAL: + /* No critical interrupts before v2 */ + return; + } + regmap_field_write(priv->rf[index], enable ? 0 : 1); +} + +static void tsens_set_interrupt_v2(struct tsens_priv *priv, u32 hw_id, + enum tsens_irq_type irq_type, bool enable) +{ + u32 index_mask = 0, index_clear = 0; + + /* + * To enable the interrupt flag for a sensor: + * - clear the mask bit + * To disable the interrupt flag for a sensor: + * - Mask further interrupts for this sensor + * - Write 1 followed by 0 to clear the interrupt + */ + switch (irq_type) { + case UPPER: + index_mask = UP_INT_MASK_0 + hw_id; + index_clear = UP_INT_CLEAR_0 + hw_id; + break; + case LOWER: + index_mask = LOW_INT_MASK_0 + hw_id; + index_clear = LOW_INT_CLEAR_0 + hw_id; + break; + case CRITICAL: + index_mask = CRIT_INT_MASK_0 + hw_id; + index_clear = CRIT_INT_CLEAR_0 + hw_id; + break; + } + + if (enable) { + regmap_field_write(priv->rf[index_mask], 0); + } else { + regmap_field_write(priv->rf[index_mask], 1); + regmap_field_write(priv->rf[index_clear], 1); + regmap_field_write(priv->rf[index_clear], 0); + } +} + +/** + * tsens_set_interrupt - Set state of an interrupt + * @priv: Pointer to tsens controller private data + * @hw_id: Hardware ID aka. sensor number + * @irq_type: irq_type from enum tsens_irq_type + * @enable: false = disable, true = enable + * + * Call IP-specific function to set state of an interrupt + * + * Return: void + */ +static void tsens_set_interrupt(struct tsens_priv *priv, u32 hw_id, + enum tsens_irq_type irq_type, bool enable) +{ + dev_dbg(priv->dev, "[%u] %s: %s -> %s\n", hw_id, __func__, + irq_type ? ((irq_type == 1) ? "UP" : "CRITICAL") : "LOW", + enable ? "en" : "dis"); + if (tsens_version(priv) > VER_1_X) + tsens_set_interrupt_v2(priv, hw_id, irq_type, enable); + else + tsens_set_interrupt_v1(priv, hw_id, irq_type, enable); +} + +/** + * tsens_threshold_violated - Check if a sensor temperature violated a preset threshold + * @priv: Pointer to tsens controller private data + * @hw_id: Hardware ID aka. sensor number + * @d: Pointer to irq state data + * + * Return: 0 if threshold was not violated, 1 if it was violated and negative + * errno in case of errors + */ +static int tsens_threshold_violated(struct tsens_priv *priv, u32 hw_id, + struct tsens_irq_data *d) +{ + int ret; + + ret = regmap_field_read(priv->rf[UPPER_STATUS_0 + hw_id], &d->up_viol); + if (ret) + return ret; + ret = regmap_field_read(priv->rf[LOWER_STATUS_0 + hw_id], &d->low_viol); + if (ret) + return ret; + + if (priv->feat->crit_int) { + ret = regmap_field_read(priv->rf[CRITICAL_STATUS_0 + hw_id], + &d->crit_viol); + if (ret) + return ret; + } + + if (d->up_viol || d->low_viol || d->crit_viol) + return 1; + + return 0; +} + +static int tsens_read_irq_state(struct tsens_priv *priv, u32 hw_id, + const struct tsens_sensor *s, + struct tsens_irq_data *d) +{ + int ret; + + ret = regmap_field_read(priv->rf[UP_INT_CLEAR_0 + hw_id], &d->up_irq_clear); + if (ret) + return ret; + ret = regmap_field_read(priv->rf[LOW_INT_CLEAR_0 + hw_id], &d->low_irq_clear); + if (ret) + return ret; + if (tsens_version(priv) > VER_1_X) { + ret = regmap_field_read(priv->rf[UP_INT_MASK_0 + hw_id], &d->up_irq_mask); + if (ret) + return ret; + ret = regmap_field_read(priv->rf[LOW_INT_MASK_0 + hw_id], &d->low_irq_mask); + if (ret) + return ret; + ret = regmap_field_read(priv->rf[CRIT_INT_CLEAR_0 + hw_id], + &d->crit_irq_clear); + if (ret) + return ret; + ret = regmap_field_read(priv->rf[CRIT_INT_MASK_0 + hw_id], + &d->crit_irq_mask); + if (ret) + return ret; + + d->crit_thresh = tsens_hw_to_mC(s, CRIT_THRESH_0 + hw_id); + } else { + /* No mask register on older TSENS */ + d->up_irq_mask = 0; + d->low_irq_mask = 0; + d->crit_irq_clear = 0; + d->crit_irq_mask = 0; + d->crit_thresh = 0; + } + + d->up_thresh = tsens_hw_to_mC(s, UP_THRESH_0 + hw_id); + d->low_thresh = tsens_hw_to_mC(s, LOW_THRESH_0 + hw_id); + + dev_dbg(priv->dev, "[%u] %s%s: status(%u|%u|%u) | clr(%u|%u|%u) | mask(%u|%u|%u)\n", + hw_id, __func__, + (d->up_viol || d->low_viol || d->crit_viol) ? "(V)" : "", + d->low_viol, d->up_viol, d->crit_viol, + d->low_irq_clear, d->up_irq_clear, d->crit_irq_clear, + d->low_irq_mask, d->up_irq_mask, d->crit_irq_mask); + dev_dbg(priv->dev, "[%u] %s%s: thresh: (%d:%d:%d)\n", hw_id, __func__, + (d->up_viol || d->low_viol || d->crit_viol) ? "(V)" : "", + d->low_thresh, d->up_thresh, d->crit_thresh); + + return 0; +} + +static inline u32 masked_irq(u32 hw_id, u32 mask, enum tsens_ver ver) +{ + if (ver > VER_1_X) + return mask & (1 << hw_id); + + /* v1, v0.1 don't have a irq mask register */ + return 0; +} + +/** + * tsens_critical_irq_thread() - Threaded handler for critical interrupts + * @irq: irq number + * @data: tsens controller private data + * + * Check FSM watchdog bark status and clear if needed. + * Check all sensors to find ones that violated their critical threshold limits. + * Clear and then re-enable the interrupt. + * + * The level-triggered interrupt might deassert if the temperature returned to + * within the threshold limits by the time the handler got scheduled. We + * consider the irq to have been handled in that case. + * + * Return: IRQ_HANDLED + */ +static irqreturn_t tsens_critical_irq_thread(int irq, void *data) +{ + struct tsens_priv *priv = data; + struct tsens_irq_data d; + int temp, ret, i; + u32 wdog_status, wdog_count; + + if (priv->feat->has_watchdog) { + ret = regmap_field_read(priv->rf[WDOG_BARK_STATUS], + &wdog_status); + if (ret) + return ret; + + if (wdog_status) { + /* Clear WDOG interrupt */ + regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 1); + regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 0); + ret = regmap_field_read(priv->rf[WDOG_BARK_COUNT], + &wdog_count); + if (ret) + return ret; + if (wdog_count) + dev_dbg(priv->dev, "%s: watchdog count: %d\n", + __func__, wdog_count); + + /* Fall through to handle critical interrupts if any */ + } + } + + for (i = 0; i < priv->num_sensors; i++) { + const struct tsens_sensor *s = &priv->sensor[i]; + u32 hw_id = s->hw_id; + + if (!s->tzd) + continue; + if (!tsens_threshold_violated(priv, hw_id, &d)) + continue; + ret = get_temp_tsens_valid(s, &temp); + if (ret) { + dev_err(priv->dev, "[%u] %s: error reading sensor\n", + hw_id, __func__); + continue; + } + + tsens_read_irq_state(priv, hw_id, s, &d); + if (d.crit_viol && + !masked_irq(hw_id, d.crit_irq_mask, tsens_version(priv))) { + /* Mask critical interrupts, unused on Linux */ + tsens_set_interrupt(priv, hw_id, CRITICAL, false); + } + } + + return IRQ_HANDLED; +} + +/** + * tsens_irq_thread - Threaded interrupt handler for uplow interrupts + * @irq: irq number + * @data: tsens controller private data + * + * Check all sensors to find ones that violated their threshold limits. If the + * temperature is still outside the limits, call thermal_zone_device_update() to + * update the thresholds, else re-enable the interrupts. + * + * The level-triggered interrupt might deassert if the temperature returned to + * within the threshold limits by the time the handler got scheduled. We + * consider the irq to have been handled in that case. + * + * Return: IRQ_HANDLED + */ +static irqreturn_t tsens_irq_thread(int irq, void *data) +{ + struct tsens_priv *priv = data; + struct tsens_irq_data d; + bool enable = true, disable = false; + unsigned long flags; + int temp, ret, i; + + for (i = 0; i < priv->num_sensors; i++) { + bool trigger = false; + const struct tsens_sensor *s = &priv->sensor[i]; + u32 hw_id = s->hw_id; + + if (!s->tzd) + continue; + if (!tsens_threshold_violated(priv, hw_id, &d)) + continue; + ret = get_temp_tsens_valid(s, &temp); + if (ret) { + dev_err(priv->dev, "[%u] %s: error reading sensor\n", + hw_id, __func__); + continue; + } + + spin_lock_irqsave(&priv->ul_lock, flags); + + tsens_read_irq_state(priv, hw_id, s, &d); + + if (d.up_viol && + !masked_irq(hw_id, d.up_irq_mask, tsens_version(priv))) { + tsens_set_interrupt(priv, hw_id, UPPER, disable); + if (d.up_thresh > temp) { + dev_dbg(priv->dev, "[%u] %s: re-arm upper\n", + hw_id, __func__); + tsens_set_interrupt(priv, hw_id, UPPER, enable); + } else { + trigger = true; + /* Keep irq masked */ + } + } else if (d.low_viol && + !masked_irq(hw_id, d.low_irq_mask, tsens_version(priv))) { + tsens_set_interrupt(priv, hw_id, LOWER, disable); + if (d.low_thresh < temp) { + dev_dbg(priv->dev, "[%u] %s: re-arm low\n", + hw_id, __func__); + tsens_set_interrupt(priv, hw_id, LOWER, enable); + } else { + trigger = true; + /* Keep irq masked */ + } + } + + spin_unlock_irqrestore(&priv->ul_lock, flags); + + if (trigger) { + dev_dbg(priv->dev, "[%u] %s: TZ update trigger (%d mC)\n", + hw_id, __func__, temp); + thermal_zone_device_update(s->tzd, + THERMAL_EVENT_UNSPECIFIED); + } else { + dev_dbg(priv->dev, "[%u] %s: no violation: %d\n", + hw_id, __func__, temp); + } + + if (tsens_version(priv) < VER_0_1) { + /* Constraint: There is only 1 interrupt control register for all + * 11 temperature sensor. So monitoring more than 1 sensor based + * on interrupts will yield inconsistent result. To overcome this + * issue we will monitor only sensor 0 which is the master sensor. + */ + break; + } + } + + return IRQ_HANDLED; +} + +static int tsens_set_trips(struct thermal_zone_device *tz, int low, int high) +{ + struct tsens_sensor *s = tz->devdata; + struct tsens_priv *priv = s->priv; + struct device *dev = priv->dev; + struct tsens_irq_data d; + unsigned long flags; + int high_val, low_val, cl_high, cl_low; + u32 hw_id = s->hw_id; + + if (tsens_version(priv) < VER_0_1) { + /* Pre v0.1 IP had a single register for each type of interrupt + * and thresholds + */ + hw_id = 0; + } + + dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n", + hw_id, __func__, low, high); + + cl_high = clamp_val(high, -40000, 120000); + cl_low = clamp_val(low, -40000, 120000); + + high_val = tsens_mC_to_hw(s, cl_high); + low_val = tsens_mC_to_hw(s, cl_low); + + spin_lock_irqsave(&priv->ul_lock, flags); + + tsens_read_irq_state(priv, hw_id, s, &d); + + /* Write the new thresholds and clear the status */ + regmap_field_write(priv->rf[LOW_THRESH_0 + hw_id], low_val); + regmap_field_write(priv->rf[UP_THRESH_0 + hw_id], high_val); + tsens_set_interrupt(priv, hw_id, LOWER, true); + tsens_set_interrupt(priv, hw_id, UPPER, true); + + spin_unlock_irqrestore(&priv->ul_lock, flags); + + dev_dbg(dev, "[%u] %s: (%d:%d)->(%d:%d)\n", + hw_id, __func__, d.low_thresh, d.up_thresh, cl_low, cl_high); + + return 0; +} + +static int tsens_enable_irq(struct tsens_priv *priv) +{ + int ret; + int val = tsens_version(priv) > VER_1_X ? 7 : 1; + + ret = regmap_field_write(priv->rf[INT_EN], val); + if (ret < 0) + dev_err(priv->dev, "%s: failed to enable interrupts\n", + __func__); + + return ret; +} + +static void tsens_disable_irq(struct tsens_priv *priv) +{ + regmap_field_write(priv->rf[INT_EN], 0); +} + +int get_temp_tsens_valid(const struct tsens_sensor *s, int *temp) +{ + struct tsens_priv *priv = s->priv; + int hw_id = s->hw_id; + u32 temp_idx = LAST_TEMP_0 + hw_id; + u32 valid_idx = VALID_0 + hw_id; + u32 valid; + int ret; + + /* VER_0 doesn't have VALID bit */ + if (tsens_version(priv) == VER_0) + goto get_temp; + + /* Valid bit is 0 for 6 AHB clock cycles. + * At 19.2MHz, 1 AHB clock is ~60ns. + * We should enter this loop very, very rarely. + * Wait 1 us since it's the min of poll_timeout macro. + * Old value was 400 ns. + */ + ret = regmap_field_read_poll_timeout(priv->rf[valid_idx], valid, + valid, 1, 20 * USEC_PER_MSEC); + if (ret) + return ret; + +get_temp: + /* Valid bit is set, OK to read the temperature */ + *temp = tsens_hw_to_mC(s, temp_idx); + + return 0; +} + +int get_temp_common(const struct tsens_sensor *s, int *temp) +{ + struct tsens_priv *priv = s->priv; + int hw_id = s->hw_id; + int last_temp = 0, ret, trdy; + unsigned long timeout; + + timeout = jiffies + usecs_to_jiffies(TIMEOUT_US); + do { + if (tsens_version(priv) == VER_0) { + ret = regmap_field_read(priv->rf[TRDY], &trdy); + if (ret) + return ret; + if (!trdy) + continue; + } + + ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp); + if (ret) + return ret; + + *temp = code_to_degc(last_temp, s) * 1000; + + return 0; + } while (time_before(jiffies, timeout)); + + return -ETIMEDOUT; +} + +#ifdef CONFIG_DEBUG_FS +static int dbg_sensors_show(struct seq_file *s, void *data) +{ + struct platform_device *pdev = s->private; + struct tsens_priv *priv = platform_get_drvdata(pdev); + int i; + + seq_printf(s, "max: %2d\nnum: %2d\n\n", + priv->feat->max_sensors, priv->num_sensors); + + seq_puts(s, " id slope offset\n--------------------------\n"); + for (i = 0; i < priv->num_sensors; i++) { + seq_printf(s, "%8d %8d %8d\n", priv->sensor[i].hw_id, + priv->sensor[i].slope, priv->sensor[i].offset); + } + + return 0; +} + +static int dbg_version_show(struct seq_file *s, void *data) +{ + struct platform_device *pdev = s->private; + struct tsens_priv *priv = platform_get_drvdata(pdev); + u32 maj_ver, min_ver, step_ver; + int ret; + + if (tsens_version(priv) > VER_0_1) { + ret = regmap_field_read(priv->rf[VER_MAJOR], &maj_ver); + if (ret) + return ret; + ret = regmap_field_read(priv->rf[VER_MINOR], &min_ver); + if (ret) + return ret; + ret = regmap_field_read(priv->rf[VER_STEP], &step_ver); + if (ret) + return ret; + seq_printf(s, "%d.%d.%d\n", maj_ver, min_ver, step_ver); + } else { + seq_puts(s, "0.1.0\n"); + } + + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(dbg_version); +DEFINE_SHOW_ATTRIBUTE(dbg_sensors); + +static void tsens_debug_init(struct platform_device *pdev) +{ + struct tsens_priv *priv = platform_get_drvdata(pdev); + struct dentry *root, *file; + + root = debugfs_lookup("tsens", NULL); + if (!root) + priv->debug_root = debugfs_create_dir("tsens", NULL); + else + priv->debug_root = root; + + file = debugfs_lookup("version", priv->debug_root); + if (!file) + debugfs_create_file("version", 0444, priv->debug_root, + pdev, &dbg_version_fops); + + /* A directory for each instance of the TSENS IP */ + priv->debug = debugfs_create_dir(dev_name(&pdev->dev), priv->debug_root); + debugfs_create_file("sensors", 0444, priv->debug, pdev, &dbg_sensors_fops); +} +#else +static inline void tsens_debug_init(struct platform_device *pdev) {} +#endif + +static const struct regmap_config tsens_config = { + .name = "tm", + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static const struct regmap_config tsens_srot_config = { + .name = "srot", + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +int __init init_common(struct tsens_priv *priv) +{ + void __iomem *tm_base, *srot_base; + struct device *dev = priv->dev; + u32 ver_minor; + struct resource *res; + u32 enabled; + int ret, i, j; + struct platform_device *op = of_find_device_by_node(priv->dev->of_node); + + if (!op) + return -EINVAL; + + if (op->num_resources > 1) { + /* DT with separate SROT and TM address space */ + priv->tm_offset = 0; + res = platform_get_resource(op, IORESOURCE_MEM, 1); + srot_base = devm_ioremap_resource(dev, res); + if (IS_ERR(srot_base)) { + ret = PTR_ERR(srot_base); + goto err_put_device; + } + + priv->srot_map = devm_regmap_init_mmio(dev, srot_base, + &tsens_srot_config); + if (IS_ERR(priv->srot_map)) { + ret = PTR_ERR(priv->srot_map); + goto err_put_device; + } + } else { + /* old DTs where SROT and TM were in a contiguous 2K block */ + priv->tm_offset = 0x1000; + } + + if (tsens_version(priv) >= VER_0_1) { + res = platform_get_resource(op, IORESOURCE_MEM, 0); + tm_base = devm_ioremap_resource(dev, res); + if (IS_ERR(tm_base)) { + ret = PTR_ERR(tm_base); + goto err_put_device; + } + + priv->tm_map = devm_regmap_init_mmio(dev, tm_base, &tsens_config); + } else { /* VER_0 share the same gcc regs using a syscon */ + struct device *parent = priv->dev->parent; + + if (parent) + priv->tm_map = syscon_node_to_regmap(parent->of_node); + } + + if (IS_ERR_OR_NULL(priv->tm_map)) { + if (!priv->tm_map) + ret = -ENODEV; + else + ret = PTR_ERR(priv->tm_map); + goto err_put_device; + } + + /* VER_0 have only tm_map */ + if (!priv->srot_map) + priv->srot_map = priv->tm_map; + + if (tsens_version(priv) > VER_0_1) { + for (i = VER_MAJOR; i <= VER_STEP; i++) { + priv->rf[i] = devm_regmap_field_alloc(dev, priv->srot_map, + priv->fields[i]); + if (IS_ERR(priv->rf[i])) { + ret = PTR_ERR(priv->rf[i]); + goto err_put_device; + } + } + ret = regmap_field_read(priv->rf[VER_MINOR], &ver_minor); + if (ret) + goto err_put_device; + } + + priv->rf[TSENS_EN] = devm_regmap_field_alloc(dev, priv->srot_map, + priv->fields[TSENS_EN]); + if (IS_ERR(priv->rf[TSENS_EN])) { + ret = PTR_ERR(priv->rf[TSENS_EN]); + goto err_put_device; + } + /* in VER_0 TSENS need to be explicitly enabled */ + if (tsens_version(priv) == VER_0) + regmap_field_write(priv->rf[TSENS_EN], 1); + + ret = regmap_field_read(priv->rf[TSENS_EN], &enabled); + if (ret) + goto err_put_device; + if (!enabled) { + dev_err(dev, "%s: device not enabled\n", __func__); + ret = -ENODEV; + goto err_put_device; + } + + priv->rf[SENSOR_EN] = devm_regmap_field_alloc(dev, priv->srot_map, + priv->fields[SENSOR_EN]); + if (IS_ERR(priv->rf[SENSOR_EN])) { + ret = PTR_ERR(priv->rf[SENSOR_EN]); + goto err_put_device; + } + priv->rf[INT_EN] = devm_regmap_field_alloc(dev, priv->tm_map, + priv->fields[INT_EN]); + if (IS_ERR(priv->rf[INT_EN])) { + ret = PTR_ERR(priv->rf[INT_EN]); + goto err_put_device; + } + + priv->rf[TSENS_SW_RST] = + devm_regmap_field_alloc(dev, priv->srot_map, priv->fields[TSENS_SW_RST]); + if (IS_ERR(priv->rf[TSENS_SW_RST])) { + ret = PTR_ERR(priv->rf[TSENS_SW_RST]); + goto err_put_device; + } + + priv->rf[TRDY] = devm_regmap_field_alloc(dev, priv->tm_map, priv->fields[TRDY]); + if (IS_ERR(priv->rf[TRDY])) { + ret = PTR_ERR(priv->rf[TRDY]); + goto err_put_device; + } + + /* This loop might need changes if enum regfield_ids is reordered */ + for (j = LAST_TEMP_0; j <= UP_THRESH_15; j += 16) { + for (i = 0; i < priv->feat->max_sensors; i++) { + int idx = j + i; + + priv->rf[idx] = devm_regmap_field_alloc(dev, + priv->tm_map, + priv->fields[idx]); + if (IS_ERR(priv->rf[idx])) { + ret = PTR_ERR(priv->rf[idx]); + goto err_put_device; + } + } + } + + if (priv->feat->crit_int || tsens_version(priv) < VER_0_1) { + /* Loop might need changes if enum regfield_ids is reordered */ + for (j = CRITICAL_STATUS_0; j <= CRIT_THRESH_15; j += 16) { + for (i = 0; i < priv->feat->max_sensors; i++) { + int idx = j + i; + + priv->rf[idx] = + devm_regmap_field_alloc(dev, + priv->tm_map, + priv->fields[idx]); + if (IS_ERR(priv->rf[idx])) { + ret = PTR_ERR(priv->rf[idx]); + goto err_put_device; + } + } + } + } + + if (tsens_version(priv) > VER_1_X && ver_minor > 2) { + /* Watchdog is present only on v2.3+ */ + priv->feat->has_watchdog = 1; + for (i = WDOG_BARK_STATUS; i <= CC_MON_MASK; i++) { + priv->rf[i] = devm_regmap_field_alloc(dev, priv->tm_map, + priv->fields[i]); + if (IS_ERR(priv->rf[i])) { + ret = PTR_ERR(priv->rf[i]); + goto err_put_device; + } + } + /* + * Watchdog is already enabled, unmask the bark. + * Disable cycle completion monitoring + */ + regmap_field_write(priv->rf[WDOG_BARK_MASK], 0); + regmap_field_write(priv->rf[CC_MON_MASK], 1); + } + + spin_lock_init(&priv->ul_lock); + + /* VER_0 interrupt doesn't need to be enabled */ + if (tsens_version(priv) >= VER_0_1) + tsens_enable_irq(priv); + + tsens_debug_init(op); + +err_put_device: + put_device(&op->dev); + return ret; +} + +static int tsens_get_temp(struct thermal_zone_device *tz, int *temp) +{ + struct tsens_sensor *s = tz->devdata; + struct tsens_priv *priv = s->priv; + + return priv->ops->get_temp(s, temp); +} + +static int __maybe_unused tsens_suspend(struct device *dev) +{ + struct tsens_priv *priv = dev_get_drvdata(dev); + + if (priv->ops && priv->ops->suspend) + return priv->ops->suspend(priv); + + return 0; +} + +static int __maybe_unused tsens_resume(struct device *dev) +{ + struct tsens_priv *priv = dev_get_drvdata(dev); + + if (priv->ops && priv->ops->resume) + return priv->ops->resume(priv); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume); + +static const struct of_device_id tsens_table[] = { + { + .compatible = "qcom,ipq8064-tsens", + .data = &data_8960, + }, { + .compatible = "qcom,mdm9607-tsens", + .data = &data_9607, + }, { + .compatible = "qcom,msm8916-tsens", + .data = &data_8916, + }, { + .compatible = "qcom,msm8939-tsens", + .data = &data_8939, + }, { + .compatible = "qcom,msm8956-tsens", + .data = &data_8956, + }, { + .compatible = "qcom,msm8960-tsens", + .data = &data_8960, + }, { + .compatible = "qcom,msm8974-tsens", + .data = &data_8974, + }, { + .compatible = "qcom,msm8976-tsens", + .data = &data_8976, + }, { + .compatible = "qcom,msm8996-tsens", + .data = &data_8996, + }, { + .compatible = "qcom,tsens-v1", + .data = &data_tsens_v1, + }, { + .compatible = "qcom,tsens-v2", + .data = &data_tsens_v2, + }, + {} +}; +MODULE_DEVICE_TABLE(of, tsens_table); + +static const struct thermal_zone_device_ops tsens_of_ops = { + .get_temp = tsens_get_temp, + .set_trips = tsens_set_trips, +}; + +static int tsens_register_irq(struct tsens_priv *priv, char *irqname, + irq_handler_t thread_fn) +{ + struct platform_device *pdev; + int ret, irq; + + pdev = of_find_device_by_node(priv->dev->of_node); + if (!pdev) + return -ENODEV; + + irq = platform_get_irq_byname(pdev, irqname); + if (irq < 0) { + ret = irq; + /* For old DTs with no IRQ defined */ + if (irq == -ENXIO) + ret = 0; + } else { + /* VER_0 interrupt is TRIGGER_RISING, VER_0_1 and up is ONESHOT */ + if (tsens_version(priv) == VER_0) + ret = devm_request_threaded_irq(&pdev->dev, irq, + thread_fn, NULL, + IRQF_TRIGGER_RISING, + dev_name(&pdev->dev), + priv); + else + ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, + thread_fn, IRQF_ONESHOT, + dev_name(&pdev->dev), + priv); + + if (ret) + dev_err(&pdev->dev, "%s: failed to get irq\n", + __func__); + else + enable_irq_wake(irq); + } + + put_device(&pdev->dev); + return ret; +} + +static int tsens_register(struct tsens_priv *priv) +{ + int i, ret; + struct thermal_zone_device *tzd; + + for (i = 0; i < priv->num_sensors; i++) { + priv->sensor[i].priv = priv; + tzd = devm_thermal_of_zone_register(priv->dev, priv->sensor[i].hw_id, + &priv->sensor[i], + &tsens_of_ops); + if (IS_ERR(tzd)) + continue; + priv->sensor[i].tzd = tzd; + if (priv->ops->enable) + priv->ops->enable(priv, i); + + if (devm_thermal_add_hwmon_sysfs(tzd)) + dev_warn(priv->dev, + "Failed to add hwmon sysfs attributes\n"); + } + + /* VER_0 require to set MIN and MAX THRESH + * These 2 regs are set using the: + * - CRIT_THRESH_0 for MAX THRESH hardcoded to 120°C + * - CRIT_THRESH_1 for MIN THRESH hardcoded to 0°C + */ + if (tsens_version(priv) < VER_0_1) { + regmap_field_write(priv->rf[CRIT_THRESH_0], + tsens_mC_to_hw(priv->sensor, 120000)); + + regmap_field_write(priv->rf[CRIT_THRESH_1], + tsens_mC_to_hw(priv->sensor, 0)); + } + + ret = tsens_register_irq(priv, "uplow", tsens_irq_thread); + if (ret < 0) + return ret; + + if (priv->feat->crit_int) + ret = tsens_register_irq(priv, "critical", + tsens_critical_irq_thread); + + return ret; +} + +static int tsens_probe(struct platform_device *pdev) +{ + int ret, i; + struct device *dev; + struct device_node *np; + struct tsens_priv *priv; + const struct tsens_plat_data *data; + const struct of_device_id *id; + u32 num_sensors; + + if (pdev->dev.of_node) + dev = &pdev->dev; + else + dev = pdev->dev.parent; + + np = dev->of_node; + + id = of_match_node(tsens_table, np); + if (id) + data = id->data; + else + data = &data_8960; + + num_sensors = data->num_sensors; + + if (np) + of_property_read_u32(np, "#qcom,sensors", &num_sensors); + + if (num_sensors <= 0) { + dev_err(dev, "%s: invalid number of sensors\n", __func__); + return -EINVAL; + } + + priv = devm_kzalloc(dev, + struct_size(priv, sensor, num_sensors), + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = dev; + priv->num_sensors = num_sensors; + priv->ops = data->ops; + for (i = 0; i < priv->num_sensors; i++) { + if (data->hw_ids) + priv->sensor[i].hw_id = data->hw_ids[i]; + else + priv->sensor[i].hw_id = i; + } + priv->feat = data->feat; + priv->fields = data->fields; + + platform_set_drvdata(pdev, priv); + + if (!priv->ops || !priv->ops->init || !priv->ops->get_temp) + return -EINVAL; + + ret = priv->ops->init(priv); + if (ret < 0) { + dev_err(dev, "%s: init failed\n", __func__); + return ret; + } + + if (priv->ops->calibrate) { + ret = priv->ops->calibrate(priv); + if (ret < 0) { + if (ret != -EPROBE_DEFER) + dev_err(dev, "%s: calibration failed\n", __func__); + return ret; + } + } + + return tsens_register(priv); +} + +static int tsens_remove(struct platform_device *pdev) +{ + struct tsens_priv *priv = platform_get_drvdata(pdev); + + debugfs_remove_recursive(priv->debug_root); + tsens_disable_irq(priv); + if (priv->ops->disable) + priv->ops->disable(priv); + + return 0; +} + +static struct platform_driver tsens_driver = { + .probe = tsens_probe, + .remove = tsens_remove, + .driver = { + .name = "qcom-tsens", + .pm = &tsens_pm_ops, + .of_match_table = tsens_table, + }, +}; +module_platform_driver(tsens_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("QCOM Temperature Sensor driver"); +MODULE_ALIAS("platform:qcom-tsens"); diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h new file mode 100644 index 000000000..4f969dd7d --- /dev/null +++ b/drivers/thermal/qcom/tsens.h @@ -0,0 +1,596 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + */ + +#ifndef __QCOM_TSENS_H__ +#define __QCOM_TSENS_H__ + +#define ONE_PT_CALIB 0x1 +#define ONE_PT_CALIB2 0x2 +#define TWO_PT_CALIB 0x3 +#define CAL_DEGC_PT1 30 +#define CAL_DEGC_PT2 120 +#define SLOPE_FACTOR 1000 +#define SLOPE_DEFAULT 3200 +#define TIMEOUT_US 100 +#define THRESHOLD_MAX_ADC_CODE 0x3ff +#define THRESHOLD_MIN_ADC_CODE 0x0 + +#include <linux/interrupt.h> +#include <linux/thermal.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +struct tsens_priv; + +/* IP version numbers in ascending order */ +enum tsens_ver { + VER_0 = 0, + VER_0_1, + VER_1_X, + VER_2_X, +}; + +enum tsens_irq_type { + LOWER, + UPPER, + CRITICAL, +}; + +/** + * struct tsens_sensor - data for each sensor connected to the tsens device + * @priv: tsens device instance that this sensor is connected to + * @tzd: pointer to the thermal zone that this sensor is in + * @offset: offset of temperature adjustment curve + * @hw_id: HW ID can be used in case of platform-specific IDs + * @slope: slope of temperature adjustment curve + * @status: 8960-specific variable to track 8960 and 8660 status register offset + */ +struct tsens_sensor { + struct tsens_priv *priv; + struct thermal_zone_device *tzd; + int offset; + unsigned int hw_id; + int slope; + u32 status; +}; + +/** + * struct tsens_ops - operations as supported by the tsens device + * @init: Function to initialize the tsens device + * @calibrate: Function to calibrate the tsens device + * @get_temp: Function which returns the temp in millidegC + * @enable: Function to enable (clocks/power) tsens device + * @disable: Function to disable the tsens device + * @suspend: Function to suspend the tsens device + * @resume: Function to resume the tsens device + */ +struct tsens_ops { + /* mandatory callbacks */ + int (*init)(struct tsens_priv *priv); + int (*calibrate)(struct tsens_priv *priv); + int (*get_temp)(const struct tsens_sensor *s, int *temp); + /* optional callbacks */ + int (*enable)(struct tsens_priv *priv, int i); + void (*disable)(struct tsens_priv *priv); + int (*suspend)(struct tsens_priv *priv); + int (*resume)(struct tsens_priv *priv); +}; + +#define REG_FIELD_FOR_EACH_SENSOR11(_name, _offset, _startbit, _stopbit) \ + [_name##_##0] = REG_FIELD(_offset, _startbit, _stopbit), \ + [_name##_##1] = REG_FIELD(_offset + 4, _startbit, _stopbit), \ + [_name##_##2] = REG_FIELD(_offset + 8, _startbit, _stopbit), \ + [_name##_##3] = REG_FIELD(_offset + 12, _startbit, _stopbit), \ + [_name##_##4] = REG_FIELD(_offset + 16, _startbit, _stopbit), \ + [_name##_##5] = REG_FIELD(_offset + 20, _startbit, _stopbit), \ + [_name##_##6] = REG_FIELD(_offset + 24, _startbit, _stopbit), \ + [_name##_##7] = REG_FIELD(_offset + 28, _startbit, _stopbit), \ + [_name##_##8] = REG_FIELD(_offset + 32, _startbit, _stopbit), \ + [_name##_##9] = REG_FIELD(_offset + 36, _startbit, _stopbit), \ + [_name##_##10] = REG_FIELD(_offset + 40, _startbit, _stopbit) + +#define REG_FIELD_FOR_EACH_SENSOR16(_name, _offset, _startbit, _stopbit) \ + [_name##_##0] = REG_FIELD(_offset, _startbit, _stopbit), \ + [_name##_##1] = REG_FIELD(_offset + 4, _startbit, _stopbit), \ + [_name##_##2] = REG_FIELD(_offset + 8, _startbit, _stopbit), \ + [_name##_##3] = REG_FIELD(_offset + 12, _startbit, _stopbit), \ + [_name##_##4] = REG_FIELD(_offset + 16, _startbit, _stopbit), \ + [_name##_##5] = REG_FIELD(_offset + 20, _startbit, _stopbit), \ + [_name##_##6] = REG_FIELD(_offset + 24, _startbit, _stopbit), \ + [_name##_##7] = REG_FIELD(_offset + 28, _startbit, _stopbit), \ + [_name##_##8] = REG_FIELD(_offset + 32, _startbit, _stopbit), \ + [_name##_##9] = REG_FIELD(_offset + 36, _startbit, _stopbit), \ + [_name##_##10] = REG_FIELD(_offset + 40, _startbit, _stopbit), \ + [_name##_##11] = REG_FIELD(_offset + 44, _startbit, _stopbit), \ + [_name##_##12] = REG_FIELD(_offset + 48, _startbit, _stopbit), \ + [_name##_##13] = REG_FIELD(_offset + 52, _startbit, _stopbit), \ + [_name##_##14] = REG_FIELD(_offset + 56, _startbit, _stopbit), \ + [_name##_##15] = REG_FIELD(_offset + 60, _startbit, _stopbit) + +#define REG_FIELD_SPLIT_BITS_0_15(_name, _offset) \ + [_name##_##0] = REG_FIELD(_offset, 0, 0), \ + [_name##_##1] = REG_FIELD(_offset, 1, 1), \ + [_name##_##2] = REG_FIELD(_offset, 2, 2), \ + [_name##_##3] = REG_FIELD(_offset, 3, 3), \ + [_name##_##4] = REG_FIELD(_offset, 4, 4), \ + [_name##_##5] = REG_FIELD(_offset, 5, 5), \ + [_name##_##6] = REG_FIELD(_offset, 6, 6), \ + [_name##_##7] = REG_FIELD(_offset, 7, 7), \ + [_name##_##8] = REG_FIELD(_offset, 8, 8), \ + [_name##_##9] = REG_FIELD(_offset, 9, 9), \ + [_name##_##10] = REG_FIELD(_offset, 10, 10), \ + [_name##_##11] = REG_FIELD(_offset, 11, 11), \ + [_name##_##12] = REG_FIELD(_offset, 12, 12), \ + [_name##_##13] = REG_FIELD(_offset, 13, 13), \ + [_name##_##14] = REG_FIELD(_offset, 14, 14), \ + [_name##_##15] = REG_FIELD(_offset, 15, 15) + +#define REG_FIELD_SPLIT_BITS_16_31(_name, _offset) \ + [_name##_##0] = REG_FIELD(_offset, 16, 16), \ + [_name##_##1] = REG_FIELD(_offset, 17, 17), \ + [_name##_##2] = REG_FIELD(_offset, 18, 18), \ + [_name##_##3] = REG_FIELD(_offset, 19, 19), \ + [_name##_##4] = REG_FIELD(_offset, 20, 20), \ + [_name##_##5] = REG_FIELD(_offset, 21, 21), \ + [_name##_##6] = REG_FIELD(_offset, 22, 22), \ + [_name##_##7] = REG_FIELD(_offset, 23, 23), \ + [_name##_##8] = REG_FIELD(_offset, 24, 24), \ + [_name##_##9] = REG_FIELD(_offset, 25, 25), \ + [_name##_##10] = REG_FIELD(_offset, 26, 26), \ + [_name##_##11] = REG_FIELD(_offset, 27, 27), \ + [_name##_##12] = REG_FIELD(_offset, 28, 28), \ + [_name##_##13] = REG_FIELD(_offset, 29, 29), \ + [_name##_##14] = REG_FIELD(_offset, 30, 30), \ + [_name##_##15] = REG_FIELD(_offset, 31, 31) + +/* + * reg_field IDs to use as an index into an array + * If you change the order of the entries, check the devm_regmap_field_alloc() + * calls in init_common() + */ +enum regfield_ids { + /* ----- SROT ------ */ + /* HW_VER */ + VER_MAJOR, + VER_MINOR, + VER_STEP, + /* CTRL_OFFSET */ + TSENS_EN, + TSENS_SW_RST, + SENSOR_EN, + CODE_OR_TEMP, + + /* ----- TM ------ */ + /* TRDY */ + TRDY, + /* INTERRUPT ENABLE */ + INT_EN, /* v2+ has separate enables for crit, upper and lower irq */ + /* STATUS */ + LAST_TEMP_0, /* Last temperature reading */ + LAST_TEMP_1, + LAST_TEMP_2, + LAST_TEMP_3, + LAST_TEMP_4, + LAST_TEMP_5, + LAST_TEMP_6, + LAST_TEMP_7, + LAST_TEMP_8, + LAST_TEMP_9, + LAST_TEMP_10, + LAST_TEMP_11, + LAST_TEMP_12, + LAST_TEMP_13, + LAST_TEMP_14, + LAST_TEMP_15, + VALID_0, /* VALID reading or not */ + VALID_1, + VALID_2, + VALID_3, + VALID_4, + VALID_5, + VALID_6, + VALID_7, + VALID_8, + VALID_9, + VALID_10, + VALID_11, + VALID_12, + VALID_13, + VALID_14, + VALID_15, + LOWER_STATUS_0, /* LOWER threshold violated */ + LOWER_STATUS_1, + LOWER_STATUS_2, + LOWER_STATUS_3, + LOWER_STATUS_4, + LOWER_STATUS_5, + LOWER_STATUS_6, + LOWER_STATUS_7, + LOWER_STATUS_8, + LOWER_STATUS_9, + LOWER_STATUS_10, + LOWER_STATUS_11, + LOWER_STATUS_12, + LOWER_STATUS_13, + LOWER_STATUS_14, + LOWER_STATUS_15, + LOW_INT_STATUS_0, /* LOWER interrupt status */ + LOW_INT_STATUS_1, + LOW_INT_STATUS_2, + LOW_INT_STATUS_3, + LOW_INT_STATUS_4, + LOW_INT_STATUS_5, + LOW_INT_STATUS_6, + LOW_INT_STATUS_7, + LOW_INT_STATUS_8, + LOW_INT_STATUS_9, + LOW_INT_STATUS_10, + LOW_INT_STATUS_11, + LOW_INT_STATUS_12, + LOW_INT_STATUS_13, + LOW_INT_STATUS_14, + LOW_INT_STATUS_15, + LOW_INT_CLEAR_0, /* LOWER interrupt clear */ + LOW_INT_CLEAR_1, + LOW_INT_CLEAR_2, + LOW_INT_CLEAR_3, + LOW_INT_CLEAR_4, + LOW_INT_CLEAR_5, + LOW_INT_CLEAR_6, + LOW_INT_CLEAR_7, + LOW_INT_CLEAR_8, + LOW_INT_CLEAR_9, + LOW_INT_CLEAR_10, + LOW_INT_CLEAR_11, + LOW_INT_CLEAR_12, + LOW_INT_CLEAR_13, + LOW_INT_CLEAR_14, + LOW_INT_CLEAR_15, + LOW_INT_MASK_0, /* LOWER interrupt mask */ + LOW_INT_MASK_1, + LOW_INT_MASK_2, + LOW_INT_MASK_3, + LOW_INT_MASK_4, + LOW_INT_MASK_5, + LOW_INT_MASK_6, + LOW_INT_MASK_7, + LOW_INT_MASK_8, + LOW_INT_MASK_9, + LOW_INT_MASK_10, + LOW_INT_MASK_11, + LOW_INT_MASK_12, + LOW_INT_MASK_13, + LOW_INT_MASK_14, + LOW_INT_MASK_15, + LOW_THRESH_0, /* LOWER threshold values */ + LOW_THRESH_1, + LOW_THRESH_2, + LOW_THRESH_3, + LOW_THRESH_4, + LOW_THRESH_5, + LOW_THRESH_6, + LOW_THRESH_7, + LOW_THRESH_8, + LOW_THRESH_9, + LOW_THRESH_10, + LOW_THRESH_11, + LOW_THRESH_12, + LOW_THRESH_13, + LOW_THRESH_14, + LOW_THRESH_15, + UPPER_STATUS_0, /* UPPER threshold violated */ + UPPER_STATUS_1, + UPPER_STATUS_2, + UPPER_STATUS_3, + UPPER_STATUS_4, + UPPER_STATUS_5, + UPPER_STATUS_6, + UPPER_STATUS_7, + UPPER_STATUS_8, + UPPER_STATUS_9, + UPPER_STATUS_10, + UPPER_STATUS_11, + UPPER_STATUS_12, + UPPER_STATUS_13, + UPPER_STATUS_14, + UPPER_STATUS_15, + UP_INT_STATUS_0, /* UPPER interrupt status */ + UP_INT_STATUS_1, + UP_INT_STATUS_2, + UP_INT_STATUS_3, + UP_INT_STATUS_4, + UP_INT_STATUS_5, + UP_INT_STATUS_6, + UP_INT_STATUS_7, + UP_INT_STATUS_8, + UP_INT_STATUS_9, + UP_INT_STATUS_10, + UP_INT_STATUS_11, + UP_INT_STATUS_12, + UP_INT_STATUS_13, + UP_INT_STATUS_14, + UP_INT_STATUS_15, + UP_INT_CLEAR_0, /* UPPER interrupt clear */ + UP_INT_CLEAR_1, + UP_INT_CLEAR_2, + UP_INT_CLEAR_3, + UP_INT_CLEAR_4, + UP_INT_CLEAR_5, + UP_INT_CLEAR_6, + UP_INT_CLEAR_7, + UP_INT_CLEAR_8, + UP_INT_CLEAR_9, + UP_INT_CLEAR_10, + UP_INT_CLEAR_11, + UP_INT_CLEAR_12, + UP_INT_CLEAR_13, + UP_INT_CLEAR_14, + UP_INT_CLEAR_15, + UP_INT_MASK_0, /* UPPER interrupt mask */ + UP_INT_MASK_1, + UP_INT_MASK_2, + UP_INT_MASK_3, + UP_INT_MASK_4, + UP_INT_MASK_5, + UP_INT_MASK_6, + UP_INT_MASK_7, + UP_INT_MASK_8, + UP_INT_MASK_9, + UP_INT_MASK_10, + UP_INT_MASK_11, + UP_INT_MASK_12, + UP_INT_MASK_13, + UP_INT_MASK_14, + UP_INT_MASK_15, + UP_THRESH_0, /* UPPER threshold values */ + UP_THRESH_1, + UP_THRESH_2, + UP_THRESH_3, + UP_THRESH_4, + UP_THRESH_5, + UP_THRESH_6, + UP_THRESH_7, + UP_THRESH_8, + UP_THRESH_9, + UP_THRESH_10, + UP_THRESH_11, + UP_THRESH_12, + UP_THRESH_13, + UP_THRESH_14, + UP_THRESH_15, + CRITICAL_STATUS_0, /* CRITICAL threshold violated */ + CRITICAL_STATUS_1, + CRITICAL_STATUS_2, + CRITICAL_STATUS_3, + CRITICAL_STATUS_4, + CRITICAL_STATUS_5, + CRITICAL_STATUS_6, + CRITICAL_STATUS_7, + CRITICAL_STATUS_8, + CRITICAL_STATUS_9, + CRITICAL_STATUS_10, + CRITICAL_STATUS_11, + CRITICAL_STATUS_12, + CRITICAL_STATUS_13, + CRITICAL_STATUS_14, + CRITICAL_STATUS_15, + CRIT_INT_STATUS_0, /* CRITICAL interrupt status */ + CRIT_INT_STATUS_1, + CRIT_INT_STATUS_2, + CRIT_INT_STATUS_3, + CRIT_INT_STATUS_4, + CRIT_INT_STATUS_5, + CRIT_INT_STATUS_6, + CRIT_INT_STATUS_7, + CRIT_INT_STATUS_8, + CRIT_INT_STATUS_9, + CRIT_INT_STATUS_10, + CRIT_INT_STATUS_11, + CRIT_INT_STATUS_12, + CRIT_INT_STATUS_13, + CRIT_INT_STATUS_14, + CRIT_INT_STATUS_15, + CRIT_INT_CLEAR_0, /* CRITICAL interrupt clear */ + CRIT_INT_CLEAR_1, + CRIT_INT_CLEAR_2, + CRIT_INT_CLEAR_3, + CRIT_INT_CLEAR_4, + CRIT_INT_CLEAR_5, + CRIT_INT_CLEAR_6, + CRIT_INT_CLEAR_7, + CRIT_INT_CLEAR_8, + CRIT_INT_CLEAR_9, + CRIT_INT_CLEAR_10, + CRIT_INT_CLEAR_11, + CRIT_INT_CLEAR_12, + CRIT_INT_CLEAR_13, + CRIT_INT_CLEAR_14, + CRIT_INT_CLEAR_15, + CRIT_INT_MASK_0, /* CRITICAL interrupt mask */ + CRIT_INT_MASK_1, + CRIT_INT_MASK_2, + CRIT_INT_MASK_3, + CRIT_INT_MASK_4, + CRIT_INT_MASK_5, + CRIT_INT_MASK_6, + CRIT_INT_MASK_7, + CRIT_INT_MASK_8, + CRIT_INT_MASK_9, + CRIT_INT_MASK_10, + CRIT_INT_MASK_11, + CRIT_INT_MASK_12, + CRIT_INT_MASK_13, + CRIT_INT_MASK_14, + CRIT_INT_MASK_15, + CRIT_THRESH_0, /* CRITICAL threshold values */ + CRIT_THRESH_1, + CRIT_THRESH_2, + CRIT_THRESH_3, + CRIT_THRESH_4, + CRIT_THRESH_5, + CRIT_THRESH_6, + CRIT_THRESH_7, + CRIT_THRESH_8, + CRIT_THRESH_9, + CRIT_THRESH_10, + CRIT_THRESH_11, + CRIT_THRESH_12, + CRIT_THRESH_13, + CRIT_THRESH_14, + CRIT_THRESH_15, + + /* WATCHDOG */ + WDOG_BARK_STATUS, + WDOG_BARK_CLEAR, + WDOG_BARK_MASK, + WDOG_BARK_COUNT, + + /* CYCLE COMPLETION MONITOR */ + CC_MON_STATUS, + CC_MON_CLEAR, + CC_MON_MASK, + + MIN_STATUS_0, /* MIN threshold violated */ + MIN_STATUS_1, + MIN_STATUS_2, + MIN_STATUS_3, + MIN_STATUS_4, + MIN_STATUS_5, + MIN_STATUS_6, + MIN_STATUS_7, + MIN_STATUS_8, + MIN_STATUS_9, + MIN_STATUS_10, + MIN_STATUS_11, + MIN_STATUS_12, + MIN_STATUS_13, + MIN_STATUS_14, + MIN_STATUS_15, + MAX_STATUS_0, /* MAX threshold violated */ + MAX_STATUS_1, + MAX_STATUS_2, + MAX_STATUS_3, + MAX_STATUS_4, + MAX_STATUS_5, + MAX_STATUS_6, + MAX_STATUS_7, + MAX_STATUS_8, + MAX_STATUS_9, + MAX_STATUS_10, + MAX_STATUS_11, + MAX_STATUS_12, + MAX_STATUS_13, + MAX_STATUS_14, + MAX_STATUS_15, + + /* Keep last */ + MAX_REGFIELDS +}; + +/** + * struct tsens_features - Features supported by the IP + * @ver_major: Major number of IP version + * @crit_int: does the IP support critical interrupts? + * @adc: do the sensors only output adc code (instead of temperature)? + * @srot_split: does the IP neatly splits the register space into SROT and TM, + * with SROT only being available to secure boot firmware? + * @has_watchdog: does this IP support watchdog functionality? + * @max_sensors: maximum sensors supported by this version of the IP + */ +struct tsens_features { + unsigned int ver_major; + unsigned int crit_int:1; + unsigned int adc:1; + unsigned int srot_split:1; + unsigned int has_watchdog:1; + unsigned int max_sensors; +}; + +/** + * struct tsens_plat_data - tsens compile-time platform data + * @num_sensors: Number of sensors supported by platform + * @ops: operations the tsens instance supports + * @hw_ids: Subset of sensors ids supported by platform, if not the first n + * @feat: features of the IP + * @fields: bitfield locations + */ +struct tsens_plat_data { + const u32 num_sensors; + const struct tsens_ops *ops; + unsigned int *hw_ids; + struct tsens_features *feat; + const struct reg_field *fields; +}; + +/** + * struct tsens_context - Registers to be saved/restored across a context loss + * @threshold: Threshold register value + * @control: Control register value + */ +struct tsens_context { + int threshold; + int control; +}; + +/** + * struct tsens_priv - private data for each instance of the tsens IP + * @dev: pointer to struct device + * @num_sensors: number of sensors enabled on this device + * @tm_map: pointer to TM register address space + * @srot_map: pointer to SROT register address space + * @tm_offset: deal with old device trees that don't address TM and SROT + * address space separately + * @ul_lock: lock while processing upper/lower threshold interrupts + * @crit_lock: lock while processing critical threshold interrupts + * @rf: array of regmap_fields used to store value of the field + * @ctx: registers to be saved and restored during suspend/resume + * @feat: features of the IP + * @fields: bitfield locations + * @ops: pointer to list of callbacks supported by this device + * @debug_root: pointer to debugfs dentry for all tsens + * @debug: pointer to debugfs dentry for tsens controller + * @sensor: list of sensors attached to this device + */ +struct tsens_priv { + struct device *dev; + u32 num_sensors; + struct regmap *tm_map; + struct regmap *srot_map; + u32 tm_offset; + + /* lock for upper/lower threshold interrupts */ + spinlock_t ul_lock; + + struct regmap_field *rf[MAX_REGFIELDS]; + struct tsens_context ctx; + struct tsens_features *feat; + const struct reg_field *fields; + const struct tsens_ops *ops; + + struct dentry *debug_root; + struct dentry *debug; + + struct tsens_sensor sensor[]; +}; + +char *qfprom_read(struct device *dev, const char *cname); +void compute_intercept_slope(struct tsens_priv *priv, u32 *pt1, u32 *pt2, u32 mode); +int init_common(struct tsens_priv *priv); +int get_temp_tsens_valid(const struct tsens_sensor *s, int *temp); +int get_temp_common(const struct tsens_sensor *s, int *temp); + +/* TSENS target */ +extern struct tsens_plat_data data_8960; + +/* TSENS v0.1 targets */ +extern struct tsens_plat_data data_8916, data_8939, data_8974, data_9607; + +/* TSENS v1 targets */ +extern struct tsens_plat_data data_tsens_v1, data_8976, data_8956; + +/* TSENS v2 targets */ +extern struct tsens_plat_data data_8996, data_tsens_v2; + +#endif /* __QCOM_TSENS_H__ */ |