summaryrefslogtreecommitdiffstats
path: root/drivers/thermal/sun8i_thermal.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/thermal/sun8i_thermal.c')
-rw-r--r--drivers/thermal/sun8i_thermal.c635
1 files changed, 635 insertions, 0 deletions
diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
new file mode 100644
index 000000000..80614b6ad
--- /dev/null
+++ b/drivers/thermal/sun8i_thermal.c
@@ -0,0 +1,635 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Thermal sensor driver for Allwinner SOC
+ * Copyright (C) 2019 Yangtao Li
+ *
+ * Based on the work of Icenowy Zheng <icenowy@aosc.io>
+ * Based on the work of Ondrej Jirman <megous@megous.com>
+ * Based on the work of Josef Gajdusek <atx@atx.name>
+ */
+
+#include <linux/bitmap.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+
+#include "thermal_hwmon.h"
+
+#define MAX_SENSOR_NUM 4
+
+#define FT_TEMP_MASK GENMASK(11, 0)
+#define TEMP_CALIB_MASK GENMASK(11, 0)
+#define CALIBRATE_DEFAULT 0x800
+
+#define SUN8I_THS_CTRL0 0x00
+#define SUN8I_THS_CTRL2 0x40
+#define SUN8I_THS_IC 0x44
+#define SUN8I_THS_IS 0x48
+#define SUN8I_THS_MFC 0x70
+#define SUN8I_THS_TEMP_CALIB 0x74
+#define SUN8I_THS_TEMP_DATA 0x80
+
+#define SUN50I_THS_CTRL0 0x00
+#define SUN50I_H6_THS_ENABLE 0x04
+#define SUN50I_H6_THS_PC 0x08
+#define SUN50I_H6_THS_DIC 0x10
+#define SUN50I_H6_THS_DIS 0x20
+#define SUN50I_H6_THS_MFC 0x30
+#define SUN50I_H6_THS_TEMP_CALIB 0xa0
+#define SUN50I_H6_THS_TEMP_DATA 0xc0
+
+#define SUN8I_THS_CTRL0_T_ACQ0(x) (GENMASK(15, 0) & (x))
+#define SUN8I_THS_CTRL2_T_ACQ1(x) ((GENMASK(15, 0) & (x)) << 16)
+#define SUN8I_THS_DATA_IRQ_STS(x) BIT(x + 8)
+
+#define SUN50I_THS_CTRL0_T_ACQ(x) ((GENMASK(15, 0) & (x)) << 16)
+#define SUN50I_THS_FILTER_EN BIT(2)
+#define SUN50I_THS_FILTER_TYPE(x) (GENMASK(1, 0) & (x))
+#define SUN50I_H6_THS_PC_TEMP_PERIOD(x) ((GENMASK(19, 0) & (x)) << 12)
+#define SUN50I_H6_THS_DATA_IRQ_STS(x) BIT(x)
+
+/* millidegree celsius */
+
+struct tsensor {
+ struct ths_device *tmdev;
+ struct thermal_zone_device *tzd;
+ int id;
+};
+
+struct ths_thermal_chip {
+ bool has_mod_clk;
+ bool has_bus_clk_reset;
+ int sensor_num;
+ int offset;
+ int scale;
+ int ft_deviation;
+ int temp_data_base;
+ int (*calibrate)(struct ths_device *tmdev,
+ u16 *caldata, int callen);
+ int (*init)(struct ths_device *tmdev);
+ unsigned long (*irq_ack)(struct ths_device *tmdev);
+ int (*calc_temp)(struct ths_device *tmdev,
+ int id, int reg);
+};
+
+struct ths_device {
+ const struct ths_thermal_chip *chip;
+ struct device *dev;
+ struct regmap *regmap;
+ struct reset_control *reset;
+ struct clk *bus_clk;
+ struct clk *mod_clk;
+ struct tsensor sensor[MAX_SENSOR_NUM];
+};
+
+/* Temp Unit: millidegree Celsius */
+static int sun8i_ths_calc_temp(struct ths_device *tmdev,
+ int id, int reg)
+{
+ return tmdev->chip->offset - (reg * tmdev->chip->scale / 10);
+}
+
+static int sun50i_h5_calc_temp(struct ths_device *tmdev,
+ int id, int reg)
+{
+ if (reg >= 0x500)
+ return -1191 * reg / 10 + 223000;
+ else if (!id)
+ return -1452 * reg / 10 + 259000;
+ else
+ return -1590 * reg / 10 + 276000;
+}
+
+static int sun8i_ths_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+ struct tsensor *s = tz->devdata;
+ struct ths_device *tmdev = s->tmdev;
+ int val = 0;
+
+ regmap_read(tmdev->regmap, tmdev->chip->temp_data_base +
+ 0x4 * s->id, &val);
+
+ /* ths have no data yet */
+ if (!val)
+ return -EAGAIN;
+
+ *temp = tmdev->chip->calc_temp(tmdev, s->id, val);
+ /*
+ * According to the original sdk, there are some platforms(rarely)
+ * that add a fixed offset value after calculating the temperature
+ * value. We can't simply put it on the formula for calculating the
+ * temperature above, because the formula for calculating the
+ * temperature above is also used when the sensor is calibrated. If
+ * do this, the correct calibration formula is hard to know.
+ */
+ *temp += tmdev->chip->ft_deviation;
+
+ return 0;
+}
+
+static const struct thermal_zone_device_ops ths_ops = {
+ .get_temp = sun8i_ths_get_temp,
+};
+
+static const struct regmap_config config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .fast_io = true,
+ .max_register = 0xfc,
+};
+
+static unsigned long sun8i_h3_irq_ack(struct ths_device *tmdev)
+{
+ unsigned long irq_bitmap = 0;
+ int i, state;
+
+ regmap_read(tmdev->regmap, SUN8I_THS_IS, &state);
+
+ for (i = 0; i < tmdev->chip->sensor_num; i++) {
+ if (state & SUN8I_THS_DATA_IRQ_STS(i)) {
+ regmap_write(tmdev->regmap, SUN8I_THS_IS,
+ SUN8I_THS_DATA_IRQ_STS(i));
+ bitmap_set(&irq_bitmap, i, 1);
+ }
+ }
+
+ return irq_bitmap;
+}
+
+static unsigned long sun50i_h6_irq_ack(struct ths_device *tmdev)
+{
+ unsigned long irq_bitmap = 0;
+ int i, state;
+
+ regmap_read(tmdev->regmap, SUN50I_H6_THS_DIS, &state);
+
+ for (i = 0; i < tmdev->chip->sensor_num; i++) {
+ if (state & SUN50I_H6_THS_DATA_IRQ_STS(i)) {
+ regmap_write(tmdev->regmap, SUN50I_H6_THS_DIS,
+ SUN50I_H6_THS_DATA_IRQ_STS(i));
+ bitmap_set(&irq_bitmap, i, 1);
+ }
+ }
+
+ return irq_bitmap;
+}
+
+static irqreturn_t sun8i_irq_thread(int irq, void *data)
+{
+ struct ths_device *tmdev = data;
+ unsigned long irq_bitmap = tmdev->chip->irq_ack(tmdev);
+ int i;
+
+ for_each_set_bit(i, &irq_bitmap, tmdev->chip->sensor_num) {
+ thermal_zone_device_update(tmdev->sensor[i].tzd,
+ THERMAL_EVENT_UNSPECIFIED);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int sun8i_h3_ths_calibrate(struct ths_device *tmdev,
+ u16 *caldata, int callen)
+{
+ int i;
+
+ if (!caldata[0] || callen < 2 * tmdev->chip->sensor_num)
+ return -EINVAL;
+
+ for (i = 0; i < tmdev->chip->sensor_num; i++) {
+ int offset = (i % 2) << 4;
+
+ regmap_update_bits(tmdev->regmap,
+ SUN8I_THS_TEMP_CALIB + (4 * (i >> 1)),
+ 0xfff << offset,
+ caldata[i] << offset);
+ }
+
+ return 0;
+}
+
+static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
+ u16 *caldata, int callen)
+{
+ struct device *dev = tmdev->dev;
+ int i, ft_temp;
+
+ if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num)
+ return -EINVAL;
+
+ /*
+ * efuse layout:
+ *
+ * 0 11 16 32
+ * +-------+-------+-------+
+ * |temp| |sensor0|sensor1|
+ * +-------+-------+-------+
+ *
+ * The calibration data on the H6 is the ambient temperature and
+ * sensor values that are filled during the factory test stage.
+ *
+ * The unit of stored FT temperature is 0.1 degree celsius.
+ *
+ * We need to calculate a delta between measured and caluclated
+ * register values and this will become a calibration offset.
+ */
+ ft_temp = (caldata[0] & FT_TEMP_MASK) * 100;
+
+ for (i = 0; i < tmdev->chip->sensor_num; i++) {
+ int sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK;
+ int cdata, offset;
+ int sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg);
+
+ /*
+ * Calibration data is CALIBRATE_DEFAULT - (calculated
+ * temperature from sensor reading at factory temperature
+ * minus actual factory temperature) * 14.88 (scale from
+ * temperature to register values)
+ */
+ cdata = CALIBRATE_DEFAULT -
+ ((sensor_temp - ft_temp) * 10 / tmdev->chip->scale);
+ if (cdata & ~TEMP_CALIB_MASK) {
+ /*
+ * Calibration value more than 12-bit, but calibration
+ * register is 12-bit. In this case, ths hardware can
+ * still work without calibration, although the data
+ * won't be so accurate.
+ */
+ dev_warn(dev, "sensor%d is not calibrated.\n", i);
+ continue;
+ }
+
+ offset = (i % 2) * 16;
+ regmap_update_bits(tmdev->regmap,
+ SUN50I_H6_THS_TEMP_CALIB + (i / 2 * 4),
+ 0xfff << offset,
+ cdata << offset);
+ }
+
+ return 0;
+}
+
+static int sun8i_ths_calibrate(struct ths_device *tmdev)
+{
+ struct nvmem_cell *calcell;
+ struct device *dev = tmdev->dev;
+ u16 *caldata;
+ size_t callen;
+ int ret = 0;
+
+ calcell = devm_nvmem_cell_get(dev, "calibration");
+ if (IS_ERR(calcell)) {
+ if (PTR_ERR(calcell) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ /*
+ * Even if the external calibration data stored in sid is
+ * not accessible, the THS hardware can still work, although
+ * the data won't be so accurate.
+ *
+ * The default value of calibration register is 0x800 for
+ * every sensor, and the calibration value is usually 0x7xx
+ * or 0x8xx, so they won't be away from the default value
+ * for a lot.
+ *
+ * So here we do not return error if the calibration data is
+ * not available, except the probe needs deferring.
+ */
+ goto out;
+ }
+
+ caldata = nvmem_cell_read(calcell, &callen);
+ if (IS_ERR(caldata)) {
+ ret = PTR_ERR(caldata);
+ goto out;
+ }
+
+ tmdev->chip->calibrate(tmdev, caldata, callen);
+
+ kfree(caldata);
+out:
+ return ret;
+}
+
+static void sun8i_ths_reset_control_assert(void *data)
+{
+ reset_control_assert(data);
+}
+
+static int sun8i_ths_resource_init(struct ths_device *tmdev)
+{
+ struct device *dev = tmdev->dev;
+ struct platform_device *pdev = to_platform_device(dev);
+ void __iomem *base;
+ int ret;
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ tmdev->regmap = devm_regmap_init_mmio(dev, base, &config);
+ if (IS_ERR(tmdev->regmap))
+ return PTR_ERR(tmdev->regmap);
+
+ if (tmdev->chip->has_bus_clk_reset) {
+ tmdev->reset = devm_reset_control_get(dev, NULL);
+ if (IS_ERR(tmdev->reset))
+ return PTR_ERR(tmdev->reset);
+
+ ret = reset_control_deassert(tmdev->reset);
+ if (ret)
+ return ret;
+
+ ret = devm_add_action_or_reset(dev, sun8i_ths_reset_control_assert,
+ tmdev->reset);
+ if (ret)
+ return ret;
+
+ tmdev->bus_clk = devm_clk_get_enabled(&pdev->dev, "bus");
+ if (IS_ERR(tmdev->bus_clk))
+ return PTR_ERR(tmdev->bus_clk);
+ }
+
+ if (tmdev->chip->has_mod_clk) {
+ tmdev->mod_clk = devm_clk_get_enabled(&pdev->dev, "mod");
+ if (IS_ERR(tmdev->mod_clk))
+ return PTR_ERR(tmdev->mod_clk);
+ }
+
+ ret = clk_set_rate(tmdev->mod_clk, 24000000);
+ if (ret)
+ return ret;
+
+ ret = sun8i_ths_calibrate(tmdev);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int sun8i_h3_thermal_init(struct ths_device *tmdev)
+{
+ int val;
+
+ /* average over 4 samples */
+ regmap_write(tmdev->regmap, SUN8I_THS_MFC,
+ SUN50I_THS_FILTER_EN |
+ SUN50I_THS_FILTER_TYPE(1));
+ /*
+ * clkin = 24MHz
+ * filter_samples = 4
+ * period = 0.25s
+ *
+ * x = period * clkin / 4096 / filter_samples - 1
+ * = 365
+ */
+ val = GENMASK(7 + tmdev->chip->sensor_num, 8);
+ regmap_write(tmdev->regmap, SUN8I_THS_IC,
+ SUN50I_H6_THS_PC_TEMP_PERIOD(365) | val);
+ /*
+ * T_acq = 20us
+ * clkin = 24MHz
+ *
+ * x = T_acq * clkin - 1
+ * = 479
+ */
+ regmap_write(tmdev->regmap, SUN8I_THS_CTRL0,
+ SUN8I_THS_CTRL0_T_ACQ0(479));
+ val = GENMASK(tmdev->chip->sensor_num - 1, 0);
+ regmap_write(tmdev->regmap, SUN8I_THS_CTRL2,
+ SUN8I_THS_CTRL2_T_ACQ1(479) | val);
+
+ return 0;
+}
+
+/*
+ * Without this undocumented value, the returned temperatures would
+ * be higher than real ones by about 20C.
+ */
+#define SUN50I_H6_CTRL0_UNK 0x0000002f
+
+static int sun50i_h6_thermal_init(struct ths_device *tmdev)
+{
+ int val;
+
+ /*
+ * T_acq = 20us
+ * clkin = 24MHz
+ *
+ * x = T_acq * clkin - 1
+ * = 479
+ */
+ regmap_write(tmdev->regmap, SUN50I_THS_CTRL0,
+ SUN50I_H6_CTRL0_UNK | SUN50I_THS_CTRL0_T_ACQ(479));
+ /* average over 4 samples */
+ regmap_write(tmdev->regmap, SUN50I_H6_THS_MFC,
+ SUN50I_THS_FILTER_EN |
+ SUN50I_THS_FILTER_TYPE(1));
+ /*
+ * clkin = 24MHz
+ * filter_samples = 4
+ * period = 0.25s
+ *
+ * x = period * clkin / 4096 / filter_samples - 1
+ * = 365
+ */
+ regmap_write(tmdev->regmap, SUN50I_H6_THS_PC,
+ SUN50I_H6_THS_PC_TEMP_PERIOD(365));
+ /* enable sensor */
+ val = GENMASK(tmdev->chip->sensor_num - 1, 0);
+ regmap_write(tmdev->regmap, SUN50I_H6_THS_ENABLE, val);
+ /* thermal data interrupt enable */
+ val = GENMASK(tmdev->chip->sensor_num - 1, 0);
+ regmap_write(tmdev->regmap, SUN50I_H6_THS_DIC, val);
+
+ return 0;
+}
+
+static int sun8i_ths_register(struct ths_device *tmdev)
+{
+ int i;
+
+ for (i = 0; i < tmdev->chip->sensor_num; i++) {
+ tmdev->sensor[i].tmdev = tmdev;
+ tmdev->sensor[i].id = i;
+ tmdev->sensor[i].tzd =
+ devm_thermal_of_zone_register(tmdev->dev,
+ i,
+ &tmdev->sensor[i],
+ &ths_ops);
+ if (IS_ERR(tmdev->sensor[i].tzd))
+ return PTR_ERR(tmdev->sensor[i].tzd);
+
+ if (devm_thermal_add_hwmon_sysfs(tmdev->sensor[i].tzd))
+ dev_warn(tmdev->dev,
+ "Failed to add hwmon sysfs attributes\n");
+ }
+
+ return 0;
+}
+
+static int sun8i_ths_probe(struct platform_device *pdev)
+{
+ struct ths_device *tmdev;
+ struct device *dev = &pdev->dev;
+ int ret, irq;
+
+ tmdev = devm_kzalloc(dev, sizeof(*tmdev), GFP_KERNEL);
+ if (!tmdev)
+ return -ENOMEM;
+
+ tmdev->dev = dev;
+ tmdev->chip = of_device_get_match_data(&pdev->dev);
+ if (!tmdev->chip)
+ return -EINVAL;
+
+ platform_set_drvdata(pdev, tmdev);
+
+ ret = sun8i_ths_resource_init(tmdev);
+ if (ret)
+ return ret;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ ret = tmdev->chip->init(tmdev);
+ if (ret)
+ return ret;
+
+ ret = sun8i_ths_register(tmdev);
+ if (ret)
+ return ret;
+
+ /*
+ * Avoid entering the interrupt handler, the thermal device is not
+ * registered yet, we deffer the registration of the interrupt to
+ * the end.
+ */
+ ret = devm_request_threaded_irq(dev, irq, NULL,
+ sun8i_irq_thread,
+ IRQF_ONESHOT, "ths", tmdev);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static const struct ths_thermal_chip sun8i_a83t_ths = {
+ .sensor_num = 3,
+ .scale = 705,
+ .offset = 191668,
+ .temp_data_base = SUN8I_THS_TEMP_DATA,
+ .calibrate = sun8i_h3_ths_calibrate,
+ .init = sun8i_h3_thermal_init,
+ .irq_ack = sun8i_h3_irq_ack,
+ .calc_temp = sun8i_ths_calc_temp,
+};
+
+static const struct ths_thermal_chip sun8i_h3_ths = {
+ .sensor_num = 1,
+ .scale = 1211,
+ .offset = 217000,
+ .has_mod_clk = true,
+ .has_bus_clk_reset = true,
+ .temp_data_base = SUN8I_THS_TEMP_DATA,
+ .calibrate = sun8i_h3_ths_calibrate,
+ .init = sun8i_h3_thermal_init,
+ .irq_ack = sun8i_h3_irq_ack,
+ .calc_temp = sun8i_ths_calc_temp,
+};
+
+static const struct ths_thermal_chip sun8i_r40_ths = {
+ .sensor_num = 2,
+ .offset = 251086,
+ .scale = 1130,
+ .has_mod_clk = true,
+ .has_bus_clk_reset = true,
+ .temp_data_base = SUN8I_THS_TEMP_DATA,
+ .calibrate = sun8i_h3_ths_calibrate,
+ .init = sun8i_h3_thermal_init,
+ .irq_ack = sun8i_h3_irq_ack,
+ .calc_temp = sun8i_ths_calc_temp,
+};
+
+static const struct ths_thermal_chip sun50i_a64_ths = {
+ .sensor_num = 3,
+ .offset = 260890,
+ .scale = 1170,
+ .has_mod_clk = true,
+ .has_bus_clk_reset = true,
+ .temp_data_base = SUN8I_THS_TEMP_DATA,
+ .calibrate = sun8i_h3_ths_calibrate,
+ .init = sun8i_h3_thermal_init,
+ .irq_ack = sun8i_h3_irq_ack,
+ .calc_temp = sun8i_ths_calc_temp,
+};
+
+static const struct ths_thermal_chip sun50i_a100_ths = {
+ .sensor_num = 3,
+ .has_bus_clk_reset = true,
+ .ft_deviation = 8000,
+ .offset = 187744,
+ .scale = 672,
+ .temp_data_base = SUN50I_H6_THS_TEMP_DATA,
+ .calibrate = sun50i_h6_ths_calibrate,
+ .init = sun50i_h6_thermal_init,
+ .irq_ack = sun50i_h6_irq_ack,
+ .calc_temp = sun8i_ths_calc_temp,
+};
+
+static const struct ths_thermal_chip sun50i_h5_ths = {
+ .sensor_num = 2,
+ .has_mod_clk = true,
+ .has_bus_clk_reset = true,
+ .temp_data_base = SUN8I_THS_TEMP_DATA,
+ .calibrate = sun8i_h3_ths_calibrate,
+ .init = sun8i_h3_thermal_init,
+ .irq_ack = sun8i_h3_irq_ack,
+ .calc_temp = sun50i_h5_calc_temp,
+};
+
+static const struct ths_thermal_chip sun50i_h6_ths = {
+ .sensor_num = 2,
+ .has_bus_clk_reset = true,
+ .ft_deviation = 7000,
+ .offset = 187744,
+ .scale = 672,
+ .temp_data_base = SUN50I_H6_THS_TEMP_DATA,
+ .calibrate = sun50i_h6_ths_calibrate,
+ .init = sun50i_h6_thermal_init,
+ .irq_ack = sun50i_h6_irq_ack,
+ .calc_temp = sun8i_ths_calc_temp,
+};
+
+static const struct of_device_id of_ths_match[] = {
+ { .compatible = "allwinner,sun8i-a83t-ths", .data = &sun8i_a83t_ths },
+ { .compatible = "allwinner,sun8i-h3-ths", .data = &sun8i_h3_ths },
+ { .compatible = "allwinner,sun8i-r40-ths", .data = &sun8i_r40_ths },
+ { .compatible = "allwinner,sun50i-a64-ths", .data = &sun50i_a64_ths },
+ { .compatible = "allwinner,sun50i-a100-ths", .data = &sun50i_a100_ths },
+ { .compatible = "allwinner,sun50i-h5-ths", .data = &sun50i_h5_ths },
+ { .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, of_ths_match);
+
+static struct platform_driver ths_driver = {
+ .probe = sun8i_ths_probe,
+ .driver = {
+ .name = "sun8i-thermal",
+ .of_match_table = of_ths_match,
+ },
+};
+module_platform_driver(ths_driver);
+
+MODULE_DESCRIPTION("Thermal sensor driver for Allwinner SOC");
+MODULE_LICENSE("GPL v2");