summaryrefslogtreecommitdiffstats
path: root/drivers/thermal/tegra/tegra30-tsensor.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/thermal/tegra/tegra30-tsensor.c')
-rw-r--r--drivers/thermal/tegra/tegra30-tsensor.c673
1 files changed, 673 insertions, 0 deletions
diff --git a/drivers/thermal/tegra/tegra30-tsensor.c b/drivers/thermal/tegra/tegra30-tsensor.c
new file mode 100644
index 000000000..c34501287
--- /dev/null
+++ b/drivers/thermal/tegra/tegra30-tsensor.c
@@ -0,0 +1,673 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Tegra30 SoC Thermal Sensor driver
+ *
+ * Based on downstream HWMON driver from NVIDIA.
+ * Copyright (C) 2011 NVIDIA Corporation
+ *
+ * Author: Dmitry Osipenko <digetx@gmail.com>
+ * Copyright (C) 2021 GRATE-DRIVER project
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/math.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+#include <linux/types.h>
+
+#include <soc/tegra/fuse.h>
+
+#include "../thermal_core.h"
+#include "../thermal_hwmon.h"
+
+#define TSENSOR_SENSOR0_CONFIG0 0x0
+#define TSENSOR_SENSOR0_CONFIG0_SENSOR_STOP BIT(0)
+#define TSENSOR_SENSOR0_CONFIG0_HW_FREQ_DIV_EN BIT(1)
+#define TSENSOR_SENSOR0_CONFIG0_THERMAL_RST_EN BIT(2)
+#define TSENSOR_SENSOR0_CONFIG0_DVFS_EN BIT(3)
+#define TSENSOR_SENSOR0_CONFIG0_INTR_OVERFLOW_EN BIT(4)
+#define TSENSOR_SENSOR0_CONFIG0_INTR_HW_FREQ_DIV_EN BIT(5)
+#define TSENSOR_SENSOR0_CONFIG0_INTR_THERMAL_RST_EN BIT(6)
+#define TSENSOR_SENSOR0_CONFIG0_M GENMASK(23, 8)
+#define TSENSOR_SENSOR0_CONFIG0_N GENMASK(31, 24)
+
+#define TSENSOR_SENSOR0_CONFIG1 0x8
+#define TSENSOR_SENSOR0_CONFIG1_TH1 GENMASK(15, 0)
+#define TSENSOR_SENSOR0_CONFIG1_TH2 GENMASK(31, 16)
+
+#define TSENSOR_SENSOR0_CONFIG2 0xc
+#define TSENSOR_SENSOR0_CONFIG2_TH3 GENMASK(15, 0)
+
+#define TSENSOR_SENSOR0_STATUS0 0x18
+#define TSENSOR_SENSOR0_STATUS0_STATE GENMASK(2, 0)
+#define TSENSOR_SENSOR0_STATUS0_INTR BIT(8)
+#define TSENSOR_SENSOR0_STATUS0_CURRENT_VALID BIT(9)
+
+#define TSENSOR_SENSOR0_TS_STATUS1 0x1c
+#define TSENSOR_SENSOR0_TS_STATUS1_CURRENT_COUNT GENMASK(31, 16)
+
+#define TEGRA30_FUSE_TEST_PROG_VER 0x28
+
+#define TEGRA30_FUSE_TSENSOR_CALIB 0x98
+#define TEGRA30_FUSE_TSENSOR_CALIB_LOW GENMASK(15, 0)
+#define TEGRA30_FUSE_TSENSOR_CALIB_HIGH GENMASK(31, 16)
+
+#define TEGRA30_FUSE_SPARE_BIT 0x144
+
+struct tegra_tsensor;
+
+struct tegra_tsensor_calibration_data {
+ int a, b, m, n, p, r;
+};
+
+struct tegra_tsensor_channel {
+ void __iomem *regs;
+ unsigned int id;
+ struct tegra_tsensor *ts;
+ struct thermal_zone_device *tzd;
+};
+
+struct tegra_tsensor {
+ void __iomem *regs;
+ bool swap_channels;
+ struct clk *clk;
+ struct device *dev;
+ struct reset_control *rst;
+ struct tegra_tsensor_channel ch[2];
+ struct tegra_tsensor_calibration_data calib;
+};
+
+static int tegra_tsensor_hw_enable(const struct tegra_tsensor *ts)
+{
+ u32 val;
+ int err;
+
+ err = reset_control_assert(ts->rst);
+ if (err) {
+ dev_err(ts->dev, "failed to assert hardware reset: %d\n", err);
+ return err;
+ }
+
+ err = clk_prepare_enable(ts->clk);
+ if (err) {
+ dev_err(ts->dev, "failed to enable clock: %d\n", err);
+ return err;
+ }
+
+ fsleep(1000);
+
+ err = reset_control_deassert(ts->rst);
+ if (err) {
+ dev_err(ts->dev, "failed to deassert hardware reset: %d\n", err);
+ goto disable_clk;
+ }
+
+ /*
+ * Sensors are enabled after reset by default, but not gauging
+ * until clock counter is programmed.
+ *
+ * M: number of reference clock pulses after which every
+ * temperature / voltage measurement is made
+ *
+ * N: number of reference clock counts for which the counter runs
+ */
+ val = FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_M, 12500);
+ val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_N, 255);
+
+ /* apply the same configuration to both channels */
+ writel_relaxed(val, ts->regs + 0x40 + TSENSOR_SENSOR0_CONFIG0);
+ writel_relaxed(val, ts->regs + 0x80 + TSENSOR_SENSOR0_CONFIG0);
+
+ return 0;
+
+disable_clk:
+ clk_disable_unprepare(ts->clk);
+
+ return err;
+}
+
+static int tegra_tsensor_hw_disable(const struct tegra_tsensor *ts)
+{
+ int err;
+
+ err = reset_control_assert(ts->rst);
+ if (err) {
+ dev_err(ts->dev, "failed to assert hardware reset: %d\n", err);
+ return err;
+ }
+
+ clk_disable_unprepare(ts->clk);
+
+ return 0;
+}
+
+static void devm_tegra_tsensor_hw_disable(void *data)
+{
+ const struct tegra_tsensor *ts = data;
+
+ tegra_tsensor_hw_disable(ts);
+}
+
+static int tegra_tsensor_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+ const struct tegra_tsensor_channel *tsc = tz->devdata;
+ const struct tegra_tsensor *ts = tsc->ts;
+ int err, c1, c2, c3, c4, counter;
+ u32 val;
+
+ /*
+ * Counter will be invalid if hardware is misprogrammed or not enough
+ * time passed since the time when sensor was enabled.
+ */
+ err = readl_relaxed_poll_timeout(tsc->regs + TSENSOR_SENSOR0_STATUS0, val,
+ val & TSENSOR_SENSOR0_STATUS0_CURRENT_VALID,
+ 21 * USEC_PER_MSEC,
+ 21 * USEC_PER_MSEC * 50);
+ if (err) {
+ dev_err_once(ts->dev, "ch%u: counter invalid\n", tsc->id);
+ return err;
+ }
+
+ val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_TS_STATUS1);
+ counter = FIELD_GET(TSENSOR_SENSOR0_TS_STATUS1_CURRENT_COUNT, val);
+
+ /*
+ * This shouldn't happen with a valid counter status, nevertheless
+ * lets verify the value since it's in a separate (from status)
+ * register.
+ */
+ if (counter == 0xffff) {
+ dev_err_once(ts->dev, "ch%u: counter overflow\n", tsc->id);
+ return -EINVAL;
+ }
+
+ /*
+ * temperature = a * counter + b
+ * temperature = m * (temperature ^ 2) + n * temperature + p
+ */
+ c1 = DIV_ROUND_CLOSEST(ts->calib.a * counter + ts->calib.b, 1000000);
+ c1 = c1 ?: 1;
+ c2 = DIV_ROUND_CLOSEST(ts->calib.p, c1);
+ c3 = c1 * ts->calib.m;
+ c4 = ts->calib.n;
+
+ *temp = DIV_ROUND_CLOSEST(c1 * (c2 + c3 + c4), 1000);
+
+ return 0;
+}
+
+static int tegra_tsensor_temp_to_counter(const struct tegra_tsensor *ts, int temp)
+{
+ int c1, c2;
+
+ c1 = DIV_ROUND_CLOSEST(ts->calib.p - temp * 1000, ts->calib.m);
+ c2 = -ts->calib.r - int_sqrt(ts->calib.r * ts->calib.r - c1);
+
+ return DIV_ROUND_CLOSEST(c2 * 1000000 - ts->calib.b, ts->calib.a);
+}
+
+static int tegra_tsensor_set_trips(struct thermal_zone_device *tz, int low, int high)
+{
+ const struct tegra_tsensor_channel *tsc = tz->devdata;
+ const struct tegra_tsensor *ts = tsc->ts;
+ u32 val;
+
+ /*
+ * TSENSOR doesn't trigger interrupt on the "low" temperature breach,
+ * hence bail out if high temperature is unspecified.
+ */
+ if (high == INT_MAX)
+ return 0;
+
+ val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_CONFIG1);
+ val &= ~TSENSOR_SENSOR0_CONFIG1_TH1;
+
+ high = tegra_tsensor_temp_to_counter(ts, high);
+ val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG1_TH1, high);
+ writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_CONFIG1);
+
+ return 0;
+}
+
+static const struct thermal_zone_device_ops ops = {
+ .get_temp = tegra_tsensor_get_temp,
+ .set_trips = tegra_tsensor_set_trips,
+};
+
+static bool
+tegra_tsensor_handle_channel_interrupt(const struct tegra_tsensor *ts,
+ unsigned int id)
+{
+ const struct tegra_tsensor_channel *tsc = &ts->ch[id];
+ u32 val;
+
+ val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_STATUS0);
+ writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_STATUS0);
+
+ if (FIELD_GET(TSENSOR_SENSOR0_STATUS0_STATE, val) == 5)
+ dev_err_ratelimited(ts->dev, "ch%u: counter overflowed\n", id);
+
+ if (!FIELD_GET(TSENSOR_SENSOR0_STATUS0_INTR, val))
+ return false;
+
+ thermal_zone_device_update(tsc->tzd, THERMAL_EVENT_UNSPECIFIED);
+
+ return true;
+}
+
+static irqreturn_t tegra_tsensor_isr(int irq, void *data)
+{
+ const struct tegra_tsensor *ts = data;
+ bool handled = false;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(ts->ch); i++)
+ handled |= tegra_tsensor_handle_channel_interrupt(ts, i);
+
+ return handled ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int tegra_tsensor_disable_hw_channel(const struct tegra_tsensor *ts,
+ unsigned int id)
+{
+ const struct tegra_tsensor_channel *tsc = &ts->ch[id];
+ struct thermal_zone_device *tzd = tsc->tzd;
+ u32 val;
+ int err;
+
+ if (!tzd)
+ goto stop_channel;
+
+ err = thermal_zone_device_disable(tzd);
+ if (err) {
+ dev_err(ts->dev, "ch%u: failed to disable zone: %d\n", id, err);
+ return err;
+ }
+
+stop_channel:
+ /* stop channel gracefully */
+ val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_CONFIG0);
+ val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_SENSOR_STOP, 1);
+ writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_CONFIG0);
+
+ return 0;
+}
+
+static void tegra_tsensor_get_hw_channel_trips(struct thermal_zone_device *tzd,
+ int *hot_trip, int *crit_trip)
+{
+ unsigned int i;
+
+ /*
+ * 90C is the maximal critical temperature of all Tegra30 SoC variants,
+ * use it for the default trip if unspecified in a device-tree.
+ */
+ *hot_trip = 85000;
+ *crit_trip = 90000;
+
+ for (i = 0; i < tzd->num_trips; i++) {
+ enum thermal_trip_type type;
+ int trip_temp;
+
+ tzd->ops->get_trip_temp(tzd, i, &trip_temp);
+ tzd->ops->get_trip_type(tzd, i, &type);
+
+ if (type == THERMAL_TRIP_HOT)
+ *hot_trip = trip_temp;
+
+ if (type == THERMAL_TRIP_CRITICAL)
+ *crit_trip = trip_temp;
+ }
+
+ /* clamp hardware trips to the calibration limits */
+ *hot_trip = clamp(*hot_trip, 25000, 90000);
+
+ /*
+ * Kernel will perform a normal system shut down if it will
+ * see that critical temperature is breached, hence set the
+ * hardware limit by 5C higher in order to allow system to
+ * shut down gracefully before sending signal to the Power
+ * Management controller.
+ */
+ *crit_trip = clamp(*crit_trip + 5000, 25000, 90000);
+}
+
+static int tegra_tsensor_enable_hw_channel(const struct tegra_tsensor *ts,
+ unsigned int id)
+{
+ const struct tegra_tsensor_channel *tsc = &ts->ch[id];
+ struct thermal_zone_device *tzd = tsc->tzd;
+ int err, hot_trip = 0, crit_trip = 0;
+ u32 val;
+
+ if (!tzd) {
+ val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_CONFIG0);
+ val &= ~TSENSOR_SENSOR0_CONFIG0_SENSOR_STOP;
+ writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_CONFIG0);
+
+ return 0;
+ }
+
+ tegra_tsensor_get_hw_channel_trips(tzd, &hot_trip, &crit_trip);
+
+ /* prevent potential racing with tegra_tsensor_set_trips() */
+ mutex_lock(&tzd->lock);
+
+ dev_info_once(ts->dev, "ch%u: PMC emergency shutdown trip set to %dC\n",
+ id, DIV_ROUND_CLOSEST(crit_trip, 1000));
+
+ hot_trip = tegra_tsensor_temp_to_counter(ts, hot_trip);
+ crit_trip = tegra_tsensor_temp_to_counter(ts, crit_trip);
+
+ /* program LEVEL2 counter threshold */
+ val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_CONFIG1);
+ val &= ~TSENSOR_SENSOR0_CONFIG1_TH2;
+ val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG1_TH2, hot_trip);
+ writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_CONFIG1);
+
+ /* program LEVEL3 counter threshold */
+ val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_CONFIG2);
+ val &= ~TSENSOR_SENSOR0_CONFIG2_TH3;
+ val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG2_TH3, crit_trip);
+ writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_CONFIG2);
+
+ /*
+ * Enable sensor, emergency shutdown, interrupts for level 1/2/3
+ * breaches and counter overflow condition.
+ *
+ * Disable DIV2 throttle for now since we need to figure out how
+ * to integrate it properly with the thermal framework.
+ *
+ * Thermal levels supported by hardware:
+ *
+ * Level 0 = cold
+ * Level 1 = passive cooling (cpufreq DVFS)
+ * Level 2 = passive cooling assisted by hardware (DIV2)
+ * Level 3 = emergency shutdown assisted by hardware (PMC)
+ */
+ val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_CONFIG0);
+ val &= ~TSENSOR_SENSOR0_CONFIG0_SENSOR_STOP;
+ val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_DVFS_EN, 1);
+ val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_HW_FREQ_DIV_EN, 0);
+ val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_THERMAL_RST_EN, 1);
+ val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_INTR_OVERFLOW_EN, 1);
+ val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_INTR_HW_FREQ_DIV_EN, 1);
+ val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_INTR_THERMAL_RST_EN, 1);
+ writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_CONFIG0);
+
+ mutex_unlock(&tzd->lock);
+
+ err = thermal_zone_device_enable(tzd);
+ if (err) {
+ dev_err(ts->dev, "ch%u: failed to enable zone: %d\n", id, err);
+ return err;
+ }
+
+ return 0;
+}
+
+static bool tegra_tsensor_fuse_read_spare(unsigned int spare)
+{
+ u32 val = 0;
+
+ tegra_fuse_readl(TEGRA30_FUSE_SPARE_BIT + spare * 4, &val);
+
+ return !!val;
+}
+
+static int tegra_tsensor_nvmem_setup(struct tegra_tsensor *ts)
+{
+ u32 i, ate_ver = 0, cal = 0, t1_25C = 0, t2_90C = 0;
+ int err, c1_25C, c2_90C;
+
+ err = tegra_fuse_readl(TEGRA30_FUSE_TEST_PROG_VER, &ate_ver);
+ if (err) {
+ dev_err_probe(ts->dev, err, "failed to get ATE version\n");
+ return err;
+ }
+
+ if (ate_ver < 8) {
+ dev_info(ts->dev, "unsupported ATE version: %u\n", ate_ver);
+ return -ENODEV;
+ }
+
+ /*
+ * We have two TSENSOR channels in a two different spots on SoC.
+ * Second channel provides more accurate data on older SoC versions,
+ * use it as a primary channel.
+ */
+ if (ate_ver <= 21) {
+ dev_info_once(ts->dev,
+ "older ATE version detected, channels remapped\n");
+ ts->swap_channels = true;
+ }
+
+ err = tegra_fuse_readl(TEGRA30_FUSE_TSENSOR_CALIB, &cal);
+ if (err) {
+ dev_err(ts->dev, "failed to get calibration data: %d\n", err);
+ return err;
+ }
+
+ /* get calibrated counter values for 25C/90C thresholds */
+ c1_25C = FIELD_GET(TEGRA30_FUSE_TSENSOR_CALIB_LOW, cal);
+ c2_90C = FIELD_GET(TEGRA30_FUSE_TSENSOR_CALIB_HIGH, cal);
+
+ /* and calibrated temperatures corresponding to the counter values */
+ for (i = 0; i < 7; i++) {
+ t1_25C |= tegra_tsensor_fuse_read_spare(14 + i) << i;
+ t1_25C |= tegra_tsensor_fuse_read_spare(21 + i) << i;
+
+ t2_90C |= tegra_tsensor_fuse_read_spare(0 + i) << i;
+ t2_90C |= tegra_tsensor_fuse_read_spare(7 + i) << i;
+ }
+
+ if (c2_90C - c1_25C <= t2_90C - t1_25C) {
+ dev_err(ts->dev, "invalid calibration data: %d %d %u %u\n",
+ c2_90C, c1_25C, t2_90C, t1_25C);
+ return -EINVAL;
+ }
+
+ /* all calibration coefficients are premultiplied by 1000000 */
+
+ ts->calib.a = DIV_ROUND_CLOSEST((t2_90C - t1_25C) * 1000000,
+ (c2_90C - c1_25C));
+
+ ts->calib.b = t1_25C * 1000000 - ts->calib.a * c1_25C;
+
+ if (tegra_sku_info.revision == TEGRA_REVISION_A01) {
+ ts->calib.m = -2775;
+ ts->calib.n = 1338811;
+ ts->calib.p = -7300000;
+ } else {
+ ts->calib.m = -3512;
+ ts->calib.n = 1528943;
+ ts->calib.p = -11100000;
+ }
+
+ /* except the coefficient of a reduced quadratic equation */
+ ts->calib.r = DIV_ROUND_CLOSEST(ts->calib.n, ts->calib.m * 2);
+
+ dev_info_once(ts->dev,
+ "calibration: %d %d %u %u ATE ver: %u SoC rev: %u\n",
+ c2_90C, c1_25C, t2_90C, t1_25C, ate_ver,
+ tegra_sku_info.revision);
+
+ return 0;
+}
+
+static int tegra_tsensor_register_channel(struct tegra_tsensor *ts,
+ unsigned int id)
+{
+ struct tegra_tsensor_channel *tsc = &ts->ch[id];
+ unsigned int hw_id = ts->swap_channels ? !id : id;
+
+ tsc->ts = ts;
+ tsc->id = id;
+ tsc->regs = ts->regs + 0x40 * (hw_id + 1);
+
+ tsc->tzd = devm_thermal_of_zone_register(ts->dev, id, tsc, &ops);
+ if (IS_ERR(tsc->tzd)) {
+ if (PTR_ERR(tsc->tzd) != -ENODEV)
+ return dev_err_probe(ts->dev, PTR_ERR(tsc->tzd),
+ "failed to register thermal zone\n");
+
+ /*
+ * It's okay if sensor isn't assigned to any thermal zone
+ * in a device-tree.
+ */
+ tsc->tzd = NULL;
+ return 0;
+ }
+
+ if (devm_thermal_add_hwmon_sysfs(tsc->tzd))
+ dev_warn(ts->dev, "failed to add hwmon sysfs attributes\n");
+
+ return 0;
+}
+
+static int tegra_tsensor_probe(struct platform_device *pdev)
+{
+ struct tegra_tsensor *ts;
+ unsigned int i;
+ int err, irq;
+
+ ts = devm_kzalloc(&pdev->dev, sizeof(*ts), GFP_KERNEL);
+ if (!ts)
+ return -ENOMEM;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ ts->dev = &pdev->dev;
+ platform_set_drvdata(pdev, ts);
+
+ ts->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(ts->regs))
+ return PTR_ERR(ts->regs);
+
+ ts->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(ts->clk))
+ return dev_err_probe(&pdev->dev, PTR_ERR(ts->clk),
+ "failed to get clock\n");
+
+ ts->rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+ if (IS_ERR(ts->rst))
+ return dev_err_probe(&pdev->dev, PTR_ERR(ts->rst),
+ "failed to get reset control\n");
+
+ err = tegra_tsensor_nvmem_setup(ts);
+ if (err)
+ return err;
+
+ err = tegra_tsensor_hw_enable(ts);
+ if (err)
+ return err;
+
+ err = devm_add_action_or_reset(&pdev->dev,
+ devm_tegra_tsensor_hw_disable,
+ ts);
+ if (err)
+ return err;
+
+ for (i = 0; i < ARRAY_SIZE(ts->ch); i++) {
+ err = tegra_tsensor_register_channel(ts, i);
+ if (err)
+ return err;
+ }
+
+ err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ tegra_tsensor_isr, IRQF_ONESHOT,
+ "tegra_tsensor", ts);
+ if (err)
+ return dev_err_probe(&pdev->dev, err,
+ "failed to request interrupt\n");
+
+ for (i = 0; i < ARRAY_SIZE(ts->ch); i++) {
+ err = tegra_tsensor_enable_hw_channel(ts, i);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+static int __maybe_unused tegra_tsensor_suspend(struct device *dev)
+{
+ struct tegra_tsensor *ts = dev_get_drvdata(dev);
+ unsigned int i;
+ int err;
+
+ for (i = 0; i < ARRAY_SIZE(ts->ch); i++) {
+ err = tegra_tsensor_disable_hw_channel(ts, i);
+ if (err)
+ goto enable_channel;
+ }
+
+ err = tegra_tsensor_hw_disable(ts);
+ if (err)
+ goto enable_channel;
+
+ return 0;
+
+enable_channel:
+ while (i--)
+ tegra_tsensor_enable_hw_channel(ts, i);
+
+ return err;
+}
+
+static int __maybe_unused tegra_tsensor_resume(struct device *dev)
+{
+ struct tegra_tsensor *ts = dev_get_drvdata(dev);
+ unsigned int i;
+ int err;
+
+ err = tegra_tsensor_hw_enable(ts);
+ if (err)
+ return err;
+
+ for (i = 0; i < ARRAY_SIZE(ts->ch); i++) {
+ err = tegra_tsensor_enable_hw_channel(ts, i);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+static const struct dev_pm_ops tegra_tsensor_pm_ops = {
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(tegra_tsensor_suspend,
+ tegra_tsensor_resume)
+};
+
+static const struct of_device_id tegra_tsensor_of_match[] = {
+ { .compatible = "nvidia,tegra30-tsensor", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, tegra_tsensor_of_match);
+
+static struct platform_driver tegra_tsensor_driver = {
+ .probe = tegra_tsensor_probe,
+ .driver = {
+ .name = "tegra30-tsensor",
+ .of_match_table = tegra_tsensor_of_match,
+ .pm = &tegra_tsensor_pm_ops,
+ },
+};
+module_platform_driver(tegra_tsensor_driver);
+
+MODULE_DESCRIPTION("NVIDIA Tegra30 Thermal Sensor driver");
+MODULE_AUTHOR("Dmitry Osipenko <digetx@gmail.com>");
+MODULE_LICENSE("GPL");