diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/thermal/ti-soc-thermal/ti-bandgap.h | 382 |
1 files changed, 382 insertions, 0 deletions
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.h b/drivers/thermal/ti-soc-thermal/ti-bandgap.h new file mode 100644 index 000000000..1f4bbaf31 --- /dev/null +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.h @@ -0,0 +1,382 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * OMAP4 Bandgap temperature sensor driver + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Contact: + * Eduardo Valentin <eduardo.valentin@ti.com> + */ +#ifndef __TI_BANDGAP_H +#define __TI_BANDGAP_H + +#include <linux/spinlock.h> +#include <linux/types.h> +#include <linux/err.h> +#include <linux/cpu_pm.h> +#include <linux/device.h> +#include <linux/pm_runtime.h> +#include <linux/pm.h> + +struct gpio_desc; + +/** + * DOC: bandgap driver data structure + * ================================== + * + * +----------+----------------+ + * | struct temp_sensor_regval | + * +---------------------------+ + * * (Array of) + * | + * | + * +-------------------+ +-----------------+ + * | struct ti_bandgap |-->| struct device * | + * +----------+--------+ +-----------------+ + * | + * | + * V + * +------------------------+ + * | struct ti_bandgap_data | + * +------------------------+ + * | + * | + * * (Array of) + * +------------+------------------------------------------------------+ + * | +----------+------------+ +-------------------------+ | + * | | struct ti_temp_sensor |-->| struct temp_sensor_data | | + * | +-----------------------+ +------------+------------+ | + * | | | + * | + | + * | V | + * | +----------+-------------------+ | + * | | struct temp_sensor_registers | | + * | +------------------------------+ | + * | | + * +-------------------------------------------------------------------+ + * + * Above is a simple diagram describing how the data structure below + * are organized. For each bandgap device there should be a ti_bandgap_data + * containing the device instance configuration, as well as, an array of + * sensors, representing every sensor instance present in this bandgap. + */ + +/** + * struct temp_sensor_registers - descriptor to access registers and bitfields + * @temp_sensor_ctrl: TEMP_SENSOR_CTRL register offset + * @bgap_tempsoff_mask: mask to temp_sensor_ctrl.tempsoff + * @bgap_soc_mask: mask to temp_sensor_ctrl.soc + * @bgap_eocz_mask: mask to temp_sensor_ctrl.eocz + * @bgap_dtemp_mask: mask to temp_sensor_ctrl.dtemp + * @bgap_mask_ctrl: BANDGAP_MASK_CTRL register offset + * @mask_hot_mask: mask to bandgap_mask_ctrl.mask_hot + * @mask_cold_mask: mask to bandgap_mask_ctrl.mask_cold + * @mask_counter_delay_mask: mask to bandgap_mask_ctrl.mask_counter_delay + * @mask_freeze_mask: mask to bandgap_mask_ctrl.mask_free + * @bgap_mode_ctrl: BANDGAP_MODE_CTRL register offset + * @mode_ctrl_mask: mask to bandgap_mode_ctrl.mode_ctrl + * @bgap_counter: BANDGAP_COUNTER register offset + * @counter_mask: mask to bandgap_counter.counter + * @bgap_threshold: BANDGAP_THRESHOLD register offset (TALERT thresholds) + * @threshold_thot_mask: mask to bandgap_threhold.thot + * @threshold_tcold_mask: mask to bandgap_threhold.tcold + * @tshut_threshold: TSHUT_THRESHOLD register offset (TSHUT thresholds) + * @tshut_hot_mask: mask to tshut_threhold.thot + * @tshut_cold_mask: mask to tshut_threhold.thot + * @bgap_status: BANDGAP_STATUS register offset + * @status_hot_mask: mask to bandgap_status.hot + * @status_cold_mask: mask to bandgap_status.cold + * @ctrl_dtemp_1: CTRL_DTEMP1 register offset + * @ctrl_dtemp_2: CTRL_DTEMP2 register offset + * @bgap_efuse: BANDGAP_EFUSE register offset + * + * The register offsets and bitfields might change across + * OMAP and variants versions. Hence this struct serves as a + * descriptor map on how to access the registers and the bitfields. + * + * This descriptor contains registers of all versions of bandgap chips. + * Not all versions will use all registers, depending on the available + * features. Please read TRMs for descriptive explanation on each bitfield. + */ + +struct temp_sensor_registers { + u32 temp_sensor_ctrl; + u32 bgap_tempsoff_mask; + u32 bgap_soc_mask; + u32 bgap_eocz_mask; + u32 bgap_dtemp_mask; + + u32 bgap_mask_ctrl; + u32 mask_hot_mask; + u32 mask_cold_mask; + u32 mask_counter_delay_mask; + u32 mask_freeze_mask; + + u32 bgap_mode_ctrl; + u32 mode_ctrl_mask; + + u32 bgap_counter; + u32 counter_mask; + + u32 bgap_threshold; + u32 threshold_thot_mask; + u32 threshold_tcold_mask; + + u32 tshut_threshold; + u32 tshut_hot_mask; + u32 tshut_cold_mask; + + u32 bgap_status; + u32 status_hot_mask; + u32 status_cold_mask; + + u32 ctrl_dtemp_1; + u32 ctrl_dtemp_2; + u32 bgap_efuse; +}; + +/** + * struct temp_sensor_data - The thresholds and limits for temperature sensors. + * @tshut_hot: temperature to trigger a thermal reset (initial value) + * @tshut_cold: temp to get the plat out of reset due to thermal (init val) + * @t_hot: temperature to trigger a thermal alert (high initial value) + * @t_cold: temperature to trigger a thermal alert (low initial value) + * @min_freq: sensor minimum clock rate + * @max_freq: sensor maximum clock rate + * + * This data structure will hold the required thresholds and temperature limits + * for a specific temperature sensor, like shutdown temperature, alert + * temperature, clock / rate used, ADC conversion limits and update intervals + */ +struct temp_sensor_data { + u32 tshut_hot; + u32 tshut_cold; + u32 t_hot; + u32 t_cold; + u32 min_freq; + u32 max_freq; +}; + +struct ti_bandgap_data; + +/** + * struct temp_sensor_regval - temperature sensor register values and priv data + * @bg_mode_ctrl: temp sensor control register value + * @bg_ctrl: bandgap ctrl register value + * @bg_counter: bandgap counter value + * @bg_threshold: bandgap threshold register value + * @tshut_threshold: bandgap tshut register value + * @data: private data + * + * Data structure to save and restore bandgap register set context. Only + * required registers are shadowed, when needed. + */ +struct temp_sensor_regval { + u32 bg_mode_ctrl; + u32 bg_ctrl; + u32 bg_counter; + u32 bg_threshold; + u32 tshut_threshold; + void *data; +}; + +/** + * struct ti_bandgap - bandgap device structure + * @dev: struct device pointer + * @base: io memory base address + * @conf: struct with bandgap configuration set (# sensors, conv_table, etc) + * @regval: temperature sensor register values + * @fclock: pointer to functional clock of temperature sensor + * @div_clk: pointer to divider clock of temperature sensor fclk + * @lock: spinlock for ti_bandgap structure + * @irq: MPU IRQ number for thermal alert + * @tshut_gpio: GPIO where Tshut signal is routed + * @clk_rate: Holds current clock rate + * + * The bandgap device structure representing the bandgap device instance. + * It holds most of the dynamic stuff. Configurations and sensor specific + * entries are inside the @conf structure. + */ +struct ti_bandgap { + struct device *dev; + void __iomem *base; + const struct ti_bandgap_data *conf; + struct temp_sensor_regval *regval; + struct clk *fclock; + struct clk *div_clk; + spinlock_t lock; /* shields this struct */ + int irq; + struct gpio_desc *tshut_gpiod; + u32 clk_rate; + struct notifier_block nb; + unsigned int is_suspended:1; +}; + +/** + * struct ti_temp_sensor - bandgap temperature sensor configuration data + * @ts_data: pointer to struct with thresholds, limits of temperature sensor + * @registers: pointer to the list of register offsets and bitfields + * @domain: the name of the domain where the sensor is located + * @slope_pcb: sensor gradient slope info for hotspot extrapolation equation + * with no external influence + * @constant_pcb: sensor gradient const info for hotspot extrapolation equation + * with no external influence + * @register_cooling: function to describe how this sensor is going to be cooled + * @unregister_cooling: function to release cooling data + * + * Data structure to describe a temperature sensor handled by a bandgap device. + * It should provide configuration details on this sensor, such as how to + * access the registers affecting this sensor, shadow register buffer, how to + * assess the gradient from hotspot, how to cooldown the domain when sensor + * reports too hot temperature. + */ +struct ti_temp_sensor { + struct temp_sensor_data *ts_data; + struct temp_sensor_registers *registers; + char *domain; + /* for hotspot extrapolation */ + const int slope_pcb; + const int constant_pcb; + int (*register_cooling)(struct ti_bandgap *bgp, int id); + int (*unregister_cooling)(struct ti_bandgap *bgp, int id); +}; + +/** + * DOC: ti bandgap feature types + * + * TI_BANDGAP_FEATURE_TSHUT - used when the thermal shutdown signal output + * of a bandgap device instance is routed to the processor. This means + * the system must react and perform the shutdown by itself (handle an + * IRQ, for instance). + * + * TI_BANDGAP_FEATURE_TSHUT_CONFIG - used when the bandgap device has control + * over the thermal shutdown configuration. This means that the thermal + * shutdown thresholds are programmable, for instance. + * + * TI_BANDGAP_FEATURE_TALERT - used when the bandgap device instance outputs + * a signal representing violation of programmable alert thresholds. + * + * TI_BANDGAP_FEATURE_MODE_CONFIG - used when it is possible to choose which + * mode, continuous or one shot, the bandgap device instance will operate. + * + * TI_BANDGAP_FEATURE_COUNTER - used when the bandgap device instance allows + * programming the update interval of its internal state machine. + * + * TI_BANDGAP_FEATURE_POWER_SWITCH - used when the bandgap device allows + * itself to be switched on/off. + * + * TI_BANDGAP_FEATURE_CLK_CTRL - used when the clocks feeding the bandgap + * device are gateable or not. + * + * TI_BANDGAP_FEATURE_FREEZE_BIT - used when the bandgap device features + * a history buffer that its update can be freezed/unfreezed. + * + * TI_BANDGAP_FEATURE_COUNTER_DELAY - used when the bandgap device features + * a delay programming based on distinct values. + * + * TI_BANDGAP_FEATURE_HISTORY_BUFFER - used when the bandgap device features + * a history buffer of temperatures. + * + * TI_BANDGAP_FEATURE_ERRATA_814 - used to workaorund when the bandgap device + * has Errata 814 + * TI_BANDGAP_FEATURE_UNRELIABLE - used when the sensor readings are too + * inaccurate. + * TI_BANDGAP_FEATURE_CONT_MODE_ONLY - used when single mode hangs the sensor + * TI_BANDGAP_HAS(b, f) - macro to check if a bandgap device is capable of a + * specific feature (above) or not. Return non-zero, if yes. + */ +#define TI_BANDGAP_FEATURE_TSHUT BIT(0) +#define TI_BANDGAP_FEATURE_TSHUT_CONFIG BIT(1) +#define TI_BANDGAP_FEATURE_TALERT BIT(2) +#define TI_BANDGAP_FEATURE_MODE_CONFIG BIT(3) +#define TI_BANDGAP_FEATURE_COUNTER BIT(4) +#define TI_BANDGAP_FEATURE_POWER_SWITCH BIT(5) +#define TI_BANDGAP_FEATURE_CLK_CTRL BIT(6) +#define TI_BANDGAP_FEATURE_FREEZE_BIT BIT(7) +#define TI_BANDGAP_FEATURE_COUNTER_DELAY BIT(8) +#define TI_BANDGAP_FEATURE_HISTORY_BUFFER BIT(9) +#define TI_BANDGAP_FEATURE_ERRATA_814 BIT(10) +#define TI_BANDGAP_FEATURE_UNRELIABLE BIT(11) +#define TI_BANDGAP_FEATURE_CONT_MODE_ONLY BIT(12) +#define TI_BANDGAP_HAS(b, f) \ + ((b)->conf->features & TI_BANDGAP_FEATURE_ ## f) + +/** + * struct ti_bandgap_data - ti bandgap data configuration structure + * @features: a bitwise flag set to describe the device features + * @conv_table: Pointer to ADC to temperature conversion table + * @adc_start_val: ADC conversion table starting value + * @adc_end_val: ADC conversion table ending value + * @fclock_name: clock name of the functional clock + * @div_ck_name: clock name of the clock divisor + * @sensor_count: count of temperature sensor within this bandgap device + * @report_temperature: callback to report thermal alert to thermal API + * @expose_sensor: callback to export sensor to thermal API + * @remove_sensor: callback to destroy sensor from thermal API + * @sensors: array of sensors present in this bandgap instance + * + * This is a data structure which should hold most of the static configuration + * of a bandgap device instance. It should describe which features this instance + * is capable of, the clock names to feed this device, the amount of sensors and + * their configuration representation, and how to export and unexport them to + * a thermal API. + */ +struct ti_bandgap_data { + unsigned int features; + const int *conv_table; + u32 adc_start_val; + u32 adc_end_val; + char *fclock_name; + char *div_ck_name; + int sensor_count; + int (*report_temperature)(struct ti_bandgap *bgp, int id); + int (*expose_sensor)(struct ti_bandgap *bgp, int id, char *domain); + int (*remove_sensor)(struct ti_bandgap *bgp, int id); + + /* this needs to be at the end */ + struct ti_temp_sensor sensors[]; +}; + +int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot); +int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val); +int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold); +int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val); +int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id, + int *interval); +int ti_bandgap_write_update_interval(struct ti_bandgap *bgp, int id, + u32 interval); +int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id, + int *temperature); +int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data); +void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id); +int ti_bandgap_get_trend(struct ti_bandgap *bgp, int id, int *trend); + +#ifdef CONFIG_OMAP3_THERMAL +extern const struct ti_bandgap_data omap34xx_data; +extern const struct ti_bandgap_data omap36xx_data; +#else +#define omap34xx_data NULL +#define omap36xx_data NULL +#endif + +#ifdef CONFIG_OMAP4_THERMAL +extern const struct ti_bandgap_data omap4430_data; +extern const struct ti_bandgap_data omap4460_data; +extern const struct ti_bandgap_data omap4470_data; +#else +#define omap4430_data NULL +#define omap4460_data NULL +#define omap4470_data NULL +#endif + +#ifdef CONFIG_OMAP5_THERMAL +extern const struct ti_bandgap_data omap5430_data; +#else +#define omap5430_data NULL +#endif + +#ifdef CONFIG_DRA752_THERMAL +extern const struct ti_bandgap_data dra752_data; +#else +#define dra752_data NULL +#endif +#endif |