diff options
Diffstat (limited to 'drivers/tty/serial/8250/serial_cs.c')
| -rw-r--r-- | drivers/tty/serial/8250/serial_cs.c | 873 |
1 files changed, 873 insertions, 0 deletions
diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c new file mode 100644 index 000000000..dc2ef05a1 --- /dev/null +++ b/drivers/tty/serial/8250/serial_cs.c @@ -0,0 +1,873 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MPL-1.1) +/*====================================================================== + + A driver for PCMCIA serial devices + + serial_cs.c 1.134 2002/05/04 05:48:53 + + The contents of this file are subject to the Mozilla Public + License Version 1.1 (the "License"); you may not use this file + except in compliance with the License. You may obtain a copy of + the License at http://www.mozilla.org/MPL/ + + Software distributed under the License is distributed on an "AS + IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + implied. See the License for the specific language governing + rights and limitations under the License. + + The initial developer of the original code is David A. Hinds + <dahinds@users.sourceforge.net>. Portions created by David A. Hinds + are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + + Alternatively, the contents of this file may be used under the + terms of the GNU General Public License version 2 (the "GPL"), in which + case the provisions of the GPL are applicable instead of the + above. If you wish to allow the use of your version of this file + only under the terms of the GPL and not to allow others to use + your version of this file under the MPL, indicate your decision + by deleting the provisions above and replace them with the notice + and other provisions required by the GPL. If you do not delete + the provisions above, a recipient may use your version of this + file under either the MPL or the GPL. + +======================================================================*/ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/serial_core.h> +#include <linux/delay.h> +#include <linux/major.h> +#include <asm/io.h> + +#include <pcmcia/cistpl.h> +#include <pcmcia/ciscode.h> +#include <pcmcia/ds.h> +#include <pcmcia/cisreg.h> + +#include "8250.h" + + +/*====================================================================*/ + +/* Parameters that can be set with 'insmod' */ + +/* Enable the speaker? */ +static int do_sound = 1; +/* Skip strict UART tests? */ +static int buggy_uart; + +module_param(do_sound, int, 0444); +module_param(buggy_uart, int, 0444); + +/*====================================================================*/ + +/* Table of multi-port card ID's */ + +struct serial_quirk { + unsigned int manfid; + unsigned int prodid; + int multi; /* 1 = multifunction, > 1 = # ports */ + void (*config)(struct pcmcia_device *); + void (*setup)(struct pcmcia_device *, struct uart_8250_port *); + void (*wakeup)(struct pcmcia_device *); + int (*post)(struct pcmcia_device *); +}; + +struct serial_info { + struct pcmcia_device *p_dev; + int ndev; + int multi; + int slave; + int manfid; + int prodid; + int c950ctrl; + int line[4]; + const struct serial_quirk *quirk; +}; + +struct serial_cfg_mem { + tuple_t tuple; + cisparse_t parse; + u_char buf[256]; +}; + +/* + * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6" + * manfid 0x0160, 0x0104 + * This card appears to have a 14.7456MHz clock. + */ +/* Generic Modem: MD55x (GPRS/EDGE) have + * Elan VPU16551 UART with 14.7456MHz oscillator + * manfid 0x015D, 0x4C45 + */ +static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_8250_port *uart) +{ + uart->port.uartclk = 14745600; +} + +static int quirk_post_ibm(struct pcmcia_device *link) +{ + u8 val; + int ret; + + ret = pcmcia_read_config_byte(link, 0x800, &val); + if (ret) + goto failed; + + ret = pcmcia_write_config_byte(link, 0x800, val | 1); + if (ret) + goto failed; + return 0; + + failed: + return -ENODEV; +} + +/* + * Nokia cards are not really multiport cards. Shouldn't this + * be handled by setting the quirk entry .multi = 0 | 1 ? + */ +static void quirk_config_nokia(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + + if (info->multi > 1) + info->multi = 1; +} + +static void quirk_wakeup_oxsemi(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + + if (info->c950ctrl) + outb(12, info->c950ctrl + 1); +} + +/* request_region? oxsemi branch does no request_region too... */ +/* + * This sequence is needed to properly initialize MC45 attached to OXCF950. + * I tried decreasing these msleep()s, but it worked properly (survived + * 1000 stop/start operations) with these timeouts (or bigger). + */ +static void quirk_wakeup_possio_gcc(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + unsigned int ctrl = info->c950ctrl; + + outb(0xA, ctrl + 1); + msleep(100); + outb(0xE, ctrl + 1); + msleep(300); + outb(0xC, ctrl + 1); + msleep(100); + outb(0xE, ctrl + 1); + msleep(200); + outb(0xF, ctrl + 1); + msleep(100); + outb(0xE, ctrl + 1); + msleep(100); + outb(0xC, ctrl + 1); +} + +/* + * Socket Dual IO: this enables irq's for second port + */ +static void quirk_config_socket(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + + if (info->multi) + link->config_flags |= CONF_ENABLE_ESR; +} + +static const struct serial_quirk quirks[] = { + { + .manfid = 0x0160, + .prodid = 0x0104, + .multi = -1, + .setup = quirk_setup_brainboxes_0104, + }, { + .manfid = 0x015D, + .prodid = 0x4C45, + .multi = -1, + .setup = quirk_setup_brainboxes_0104, + }, { + .manfid = MANFID_IBM, + .prodid = ~0, + .multi = -1, + .post = quirk_post_ibm, + }, { + .manfid = MANFID_INTEL, + .prodid = PRODID_INTEL_DUAL_RS232, + .multi = 2, + }, { + .manfid = MANFID_NATINST, + .prodid = PRODID_NATINST_QUAD_RS232, + .multi = 4, + }, { + .manfid = MANFID_NOKIA, + .prodid = ~0, + .multi = -1, + .config = quirk_config_nokia, + }, { + .manfid = MANFID_OMEGA, + .prodid = PRODID_OMEGA_QSP_100, + .multi = 4, + }, { + .manfid = MANFID_OXSEMI, + .prodid = ~0, + .multi = -1, + .wakeup = quirk_wakeup_oxsemi, + }, { + .manfid = MANFID_POSSIO, + .prodid = PRODID_POSSIO_GCC, + .multi = -1, + .wakeup = quirk_wakeup_possio_gcc, + }, { + .manfid = MANFID_QUATECH, + .prodid = PRODID_QUATECH_DUAL_RS232, + .multi = 2, + }, { + .manfid = MANFID_QUATECH, + .prodid = PRODID_QUATECH_DUAL_RS232_D1, + .multi = 2, + }, { + .manfid = MANFID_QUATECH, + .prodid = PRODID_QUATECH_DUAL_RS232_G, + .multi = 2, + }, { + .manfid = MANFID_QUATECH, + .prodid = PRODID_QUATECH_QUAD_RS232, + .multi = 4, + }, { + .manfid = MANFID_SOCKET, + .prodid = PRODID_SOCKET_DUAL_RS232, + .multi = 2, + .config = quirk_config_socket, + }, { + .manfid = MANFID_SOCKET, + .prodid = ~0, + .multi = -1, + .config = quirk_config_socket, + } +}; + + +static int serial_config(struct pcmcia_device *link); + + +static void serial_remove(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i; + + dev_dbg(&link->dev, "serial_release\n"); + + /* + * Recheck to see if the device is still configured. + */ + for (i = 0; i < info->ndev; i++) + serial8250_unregister_port(info->line[i]); + + if (!info->slave) + pcmcia_disable_device(link); +} + +static int serial_suspend(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i; + + for (i = 0; i < info->ndev; i++) + serial8250_suspend_port(info->line[i]); + + return 0; +} + +static int serial_resume(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i; + + for (i = 0; i < info->ndev; i++) + serial8250_resume_port(info->line[i]); + + if (info->quirk && info->quirk->wakeup) + info->quirk->wakeup(link); + + return 0; +} + +static int serial_probe(struct pcmcia_device *link) +{ + struct serial_info *info; + int ret; + + dev_dbg(&link->dev, "serial_attach()\n"); + + /* Create new serial device */ + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + info->p_dev = link; + link->priv = info; + + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + if (do_sound) + link->config_flags |= CONF_ENABLE_SPKR; + + ret = serial_config(link); + if (ret) + goto free_info; + + return 0; + +free_info: + kfree(info); + return ret; +} + +static void serial_detach(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + + dev_dbg(&link->dev, "serial_detach\n"); + + /* + * Ensure that the ports have been released. + */ + serial_remove(link); + + /* free bits */ + kfree(info); +} + +/*====================================================================*/ + +static int setup_serial(struct pcmcia_device *handle, struct serial_info *info, + unsigned int iobase, int irq) +{ + struct uart_8250_port uart; + int line; + + memset(&uart, 0, sizeof(uart)); + uart.port.iobase = iobase; + uart.port.irq = irq; + uart.port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; + uart.port.uartclk = 1843200; + uart.port.dev = &handle->dev; + if (buggy_uart) + uart.port.flags |= UPF_BUGGY_UART; + + if (info->quirk && info->quirk->setup) + info->quirk->setup(handle, &uart); + + line = serial8250_register_8250_port(&uart); + if (line < 0) { + pr_err("serial_cs: serial8250_register_8250_port() at 0x%04lx, irq %d failed\n", + (unsigned long)iobase, irq); + return -EINVAL; + } + + info->line[info->ndev] = line; + info->ndev++; + + return 0; +} + +/*====================================================================*/ + +static int pfc_config(struct pcmcia_device *p_dev) +{ + unsigned int port = 0; + struct serial_info *info = p_dev->priv; + + if ((p_dev->resource[1]->end != 0) && + (resource_size(p_dev->resource[1]) == 8)) { + port = p_dev->resource[1]->start; + info->slave = 1; + } else if ((info->manfid == MANFID_OSITECH) && + (resource_size(p_dev->resource[0]) == 0x40)) { + port = p_dev->resource[0]->start + 0x28; + info->slave = 1; + } + if (info->slave) + return setup_serial(p_dev, info, port, p_dev->irq); + + dev_warn(&p_dev->dev, "no usable port range found, giving up\n"); + return -ENODEV; +} + +static int simple_config_check(struct pcmcia_device *p_dev, void *priv_data) +{ + static const int size_table[2] = { 8, 16 }; + int *try = priv_data; + + if (p_dev->resource[0]->start == 0) + return -ENODEV; + + if ((*try & 0x1) == 0) + p_dev->io_lines = 16; + + if (p_dev->resource[0]->end != size_table[(*try >> 1)]) + return -ENODEV; + + p_dev->resource[0]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + + return pcmcia_request_io(p_dev); +} + +static int simple_config_check_notpicky(struct pcmcia_device *p_dev, + void *priv_data) +{ + static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; + int j; + + if (p_dev->io_lines > 3) + return -ENODEV; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 8; + + for (j = 0; j < 5; j++) { + p_dev->resource[0]->start = base[j]; + p_dev->io_lines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev)) + return 0; + } + return -ENODEV; +} + +static int simple_config(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int ret, try; + + /* + * First pass: look for a config entry that looks normal. + * Two tries: without IO aliases, then with aliases. + */ + link->config_flags |= CONF_AUTO_SET_VPP; + for (try = 0; try < 4; try++) + if (!pcmcia_loop_config(link, simple_config_check, &try)) + goto found_port; + + /* + * Second pass: try to find an entry that isn't picky about + * its base address, then try to grab any standard serial port + * address, and finally try to get any free port. + */ + ret = pcmcia_loop_config(link, simple_config_check_notpicky, NULL); + if (ret) { + dev_warn(&link->dev, "no usable port range found, giving up\n"); + return ret; + } + +found_port: + if (info->multi && (info->manfid == MANFID_3COM)) + link->config_index &= ~(0x08); + + /* + * Apply any configuration quirks. + */ + if (info->quirk && info->quirk->config) + info->quirk->config(link); + + ret = pcmcia_enable_device(link); + if (ret != 0) + return ret; + return setup_serial(link, info, link->resource[0]->start, link->irq); +} + +static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data) +{ + int *multi = priv_data; + + if (p_dev->resource[1]->end) + return -EINVAL; + + /* + * The quad port cards have bad CIS's, so just look for a + * window larger than 8 ports and assume it will be right. + */ + if (p_dev->resource[0]->end <= 8) + return -EINVAL; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = *multi * 8; + + if (pcmcia_request_io(p_dev)) + return -ENODEV; + return 0; +} + +static int multi_config_check_notpicky(struct pcmcia_device *p_dev, + void *priv_data) +{ + int *base2 = priv_data; + + if (!p_dev->resource[0]->end || !p_dev->resource[1]->end || + p_dev->resource[0]->start + 8 != p_dev->resource[1]->start) + return -ENODEV; + + p_dev->resource[0]->end = p_dev->resource[1]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + + if (pcmcia_request_io(p_dev)) + return -ENODEV; + + *base2 = p_dev->resource[0]->start + 8; + return 0; +} + +static int multi_config(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i, base2 = 0; + + /* First, look for a generic full-sized window */ + if (!pcmcia_loop_config(link, multi_config_check, &info->multi)) + base2 = link->resource[0]->start + 8; + else { + /* If that didn't work, look for two windows */ + info->multi = 2; + if (pcmcia_loop_config(link, multi_config_check_notpicky, + &base2)) { + dev_warn(&link->dev, + "no usable port range found, giving up\n"); + return -ENODEV; + } + } + + if (!link->irq) + dev_warn(&link->dev, "no usable IRQ found, continuing...\n"); + + /* + * Apply any configuration quirks. + */ + if (info->quirk && info->quirk->config) + info->quirk->config(link); + + i = pcmcia_enable_device(link); + if (i != 0) + return -ENODEV; + + /* The Oxford Semiconductor OXCF950 cards are in fact single-port: + * 8 registers are for the UART, the others are extra registers. + * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too. + */ + if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO && + info->prodid == PRODID_POSSIO_GCC)) { + if (link->config_index == 1 || + link->config_index == 3) { + setup_serial(link, info, base2, link->irq); + base2 = link->resource[0]->start; + } else { + setup_serial(link, info, link->resource[0]->start, + link->irq); + } + info->c950ctrl = base2; + + /* + * FIXME: We really should wake up the port prior to + * handing it over to the serial layer. + */ + if (info->quirk && info->quirk->wakeup) + info->quirk->wakeup(link); + + return 0; + } + + setup_serial(link, info, link->resource[0]->start, link->irq); + for (i = 0; i < info->multi - 1; i++) + setup_serial(link, info, base2 + (8 * i), + link->irq); + return 0; +} + +static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data) +{ + struct serial_info *info = p_dev->priv; + + if (!p_dev->resource[0]->end) + return -EINVAL; + + if ((!p_dev->resource[1]->end) && (p_dev->resource[0]->end % 8 == 0)) + info->multi = p_dev->resource[0]->end >> 3; + + if ((p_dev->resource[1]->end) && (p_dev->resource[0]->end == 8) + && (p_dev->resource[1]->end == 8)) + info->multi = 2; + + return 0; /* break */ +} + + +static int serial_config(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i; + + dev_dbg(&link->dev, "serial_config\n"); + + /* Is this a compliant multifunction card? */ + info->multi = (link->socket->functions > 1); + + /* Is this a multiport card? */ + info->manfid = link->manf_id; + info->prodid = link->card_id; + + for (i = 0; i < ARRAY_SIZE(quirks); i++) + if ((quirks[i].manfid == ~0 || + quirks[i].manfid == info->manfid) && + (quirks[i].prodid == ~0 || + quirks[i].prodid == info->prodid)) { + info->quirk = &quirks[i]; + break; + } + + /* + * Another check for dual-serial cards: look for either serial or + * multifunction cards that ask for appropriate IO port ranges. + */ + if ((info->multi == 0) && + (link->has_func_id) && + (link->socket->pcmcia_pfc == 0) && + ((link->func_id == CISTPL_FUNCID_MULTI) || + (link->func_id == CISTPL_FUNCID_SERIAL))) { + if (pcmcia_loop_config(link, serial_check_for_multi, info)) + goto failed; + } + + /* + * Apply any multi-port quirk. + */ + if (info->quirk && info->quirk->multi != -1) + info->multi = info->quirk->multi; + + dev_info(&link->dev, + "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n", + link->manf_id, link->card_id, + link->socket->pcmcia_pfc, info->multi, info->quirk); + if (link->socket->pcmcia_pfc) + i = pfc_config(link); + else if (info->multi > 1) + i = multi_config(link); + else + i = simple_config(link); + + if (i || info->ndev == 0) + goto failed; + + /* + * Apply any post-init quirk. FIXME: This should really happen + * before we register the port, since it might already be in use. + */ + if (info->quirk && info->quirk->post) + if (info->quirk->post(link)) + goto failed; + + return 0; + +failed: + dev_warn(&link->dev, "failed to initialize\n"); + serial_remove(link); + return -ENODEV; +} + +static const struct pcmcia_device_id serial_ids[] = { + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab), + PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63), + PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63), + PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef), + PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001", 0x18df0ba0, 0x831b1064), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0b05), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101), + PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070), + PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562), + PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070), + PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020), + PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15), + PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77), + PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302), + PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301), + PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276), + PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039), + PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006), + PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */ + PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */ + PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */ + PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a), + PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */ + PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50), + PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51), + PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52), + PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53), + PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180), + PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */ + PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */ + PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */ + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e), + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b), + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025), + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045), + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052), + PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */ + PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */ + PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae), + PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef), + PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef), + PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef), + PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0), + PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e), + PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a), + PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02), + PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa), + PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76), + PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95), + PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed), + PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65), + PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b), + PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6), + PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb), + PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447), + PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f), + PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f), + PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383), + PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e), + PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a), + PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41), + PCMCIA_DEVICE_PROD_ID12("Option International", "GSM-Ready 56K/ISDN", 0x9d7cd6f5, 0xb23844aa), + PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab), + PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f), + PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d), + PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38), + PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"), + PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"), + PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */ + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */ + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ + PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */ + PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */ + PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"), + PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"), + PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100 1.00.", 0x19ca78af, 0xf964f42b), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100", 0x19ca78af, 0x71d98e83), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL232 1.00.", 0x19ca78af, 0x69fb7490), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL232", 0x19ca78af, 0xb6bc0235), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.", "SERIAL CARD: CF232", 0x63f2e0bd, 0xb9e175d3), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.", "SERIAL CARD: CF232-5", 0x63f2e0bd, 0xfce33442), + PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF232", 0x3beb8cf2, 0x171e7190), + PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF232-5", 0x3beb8cf2, 0x20da4262), + PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF428", 0x3beb8cf2, 0xea5dd57d), + PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF500", 0x3beb8cf2, 0xd77255fa), + PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: IC232", 0x3beb8cf2, 0x6a709903), + PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: SL232", 0x3beb8cf2, 0x18430676), + PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: XL232", 0x3beb8cf2, 0x6f933767), + PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: CF332", 0x3beb8cf2, 0x16dc1ba7), + PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL332", 0x3beb8cf2, 0x19816c41), + PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL385", 0x3beb8cf2, 0x64112029), + PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4), + PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial+Parallel Port: SP230", 0x3beb8cf2, 0xdb9e58bc), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: CF332", 0x3beb8cf2, 0x16dc1ba7), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL332", 0x3beb8cf2, 0x19816c41), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL385", 0x3beb8cf2, 0x64112029), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4), + PCMCIA_MFC_DEVICE_PROD_ID12(2, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4), + PCMCIA_MFC_DEVICE_PROD_ID12(3, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4), + PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b), + /* too generic */ + /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */ + /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */ + PCMCIA_DEVICE_FUNC_ID(2), + PCMCIA_DEVICE_NULL, +}; +MODULE_DEVICE_TABLE(pcmcia, serial_ids); + +MODULE_FIRMWARE("cis/PCMLM28.cis"); +MODULE_FIRMWARE("cis/DP83903.cis"); +MODULE_FIRMWARE("cis/3CCFEM556.cis"); +MODULE_FIRMWARE("cis/3CXEM556.cis"); +MODULE_FIRMWARE("cis/SW_8xx_SER.cis"); +MODULE_FIRMWARE("cis/SW_7xx_SER.cis"); +MODULE_FIRMWARE("cis/SW_555_SER.cis"); +MODULE_FIRMWARE("cis/MT5634ZLX.cis"); +MODULE_FIRMWARE("cis/COMpad2.cis"); +MODULE_FIRMWARE("cis/COMpad4.cis"); +MODULE_FIRMWARE("cis/RS-COM-2P.cis"); + +static struct pcmcia_driver serial_cs_driver = { + .owner = THIS_MODULE, + .name = "serial_cs", + .probe = serial_probe, + .remove = serial_detach, + .id_table = serial_ids, + .suspend = serial_suspend, + .resume = serial_resume, +}; +module_pcmcia_driver(serial_cs_driver); + +MODULE_LICENSE("GPL"); |