summaryrefslogtreecommitdiffstats
path: root/drivers/usb/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/usb/Kconfig177
1 files changed, 177 insertions, 0 deletions
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
new file mode 100644
index 000000000..578a439e7
--- /dev/null
+++ b/drivers/usb/Kconfig
@@ -0,0 +1,177 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# USB device configuration
+#
+
+config USB_OHCI_BIG_ENDIAN_DESC
+ bool
+
+config USB_OHCI_BIG_ENDIAN_MMIO
+ bool
+
+config USB_OHCI_LITTLE_ENDIAN
+ bool
+ default n if PPC_MPC52xx
+ default y
+
+config USB_EHCI_BIG_ENDIAN_MMIO
+ bool
+
+config USB_EHCI_BIG_ENDIAN_DESC
+ bool
+
+config USB_UHCI_BIG_ENDIAN_MMIO
+ bool
+
+config USB_UHCI_BIG_ENDIAN_DESC
+ bool
+
+menuconfig USB_SUPPORT
+ bool "USB support"
+ depends on HAS_IOMEM
+ default y
+ help
+ This option adds core support for Universal Serial Bus (USB).
+ You will also need drivers from the following menu to make use of it.
+
+if USB_SUPPORT
+
+source "drivers/usb/common/Kconfig"
+
+config USB_ARCH_HAS_HCD
+ def_bool y
+
+config USB
+ tristate "Support for Host-side USB"
+ depends on USB_ARCH_HAS_HCD
+ select GENERIC_ALLOCATOR
+ select USB_COMMON
+ select NLS # for UTF-8 strings
+ help
+ Universal Serial Bus (USB) is a specification for a serial bus
+ subsystem which offers higher speeds and more features than the
+ traditional PC serial port. The bus supplies power to peripherals
+ and allows for hot swapping. Up to 127 USB peripherals can be
+ connected to a single USB host in a tree structure.
+
+ The USB host is the root of the tree, the peripherals are the
+ leaves and the inner nodes are special USB devices called hubs.
+ Most PCs now have USB host ports, used to connect peripherals
+ such as scanners, keyboards, mice, modems, cameras, disks,
+ flash memory, network links, and printers to the PC.
+
+ Say Y here if your computer has a host-side USB port and you want
+ to use USB devices. You then need to say Y to at least one of the
+ Host Controller Driver (HCD) options below. Choose a USB 1.1
+ controller, such as "UHCI HCD support" or "OHCI HCD support",
+ and "EHCI HCD (USB 2.0) support" except for older systems that
+ do not have USB 2.0 support. It doesn't normally hurt to select
+ them all if you are not certain.
+
+ If your system has a device-side USB port, used in the peripheral
+ side of the USB protocol, see the "USB Gadget" framework instead.
+
+ After choosing your HCD, then select drivers for the USB peripherals
+ you'll be using. You may want to check out the information provided
+ in <file:Documentation/usb/> and especially the links given in
+ <file:Documentation/usb/usb-help.rst>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called usbcore.
+
+config USB_PCI
+ bool "PCI based USB host interface"
+ depends on PCI
+ default y
+ help
+ Many embedded system SOCs (e.g. freescale T2080) have both
+ PCI and USB modules with the USB module directly controlled by
+ registers and having no relationship to the PCI module.
+
+ If you have such a device you may say N here and PCI related code
+ will not be built in the USB driver.
+
+if USB
+
+source "drivers/usb/core/Kconfig"
+
+source "drivers/usb/mon/Kconfig"
+
+source "drivers/usb/host/Kconfig"
+
+source "drivers/usb/renesas_usbhs/Kconfig"
+
+source "drivers/usb/class/Kconfig"
+
+source "drivers/usb/storage/Kconfig"
+
+source "drivers/usb/image/Kconfig"
+
+source "drivers/usb/usbip/Kconfig"
+
+endif
+
+source "drivers/usb/cdns3/Kconfig"
+
+source "drivers/usb/mtu3/Kconfig"
+
+source "drivers/usb/musb/Kconfig"
+
+source "drivers/usb/dwc3/Kconfig"
+
+source "drivers/usb/dwc2/Kconfig"
+
+source "drivers/usb/chipidea/Kconfig"
+
+source "drivers/usb/isp1760/Kconfig"
+
+comment "USB port drivers"
+
+if USB
+
+config USB_USS720
+ tristate "USS720 parport driver"
+ depends on PARPORT
+ select PARPORT_NOT_PC
+ help
+ This driver is for USB parallel port adapters that use the Lucent
+ Technologies USS-720 chip. These cables are plugged into your USB
+ port and provide USB compatibility to peripherals designed with
+ parallel port interfaces.
+
+ The chip has two modes: automatic mode and manual mode. In automatic
+ mode, it looks to the computer like a standard USB printer. Only
+ printers may be connected to the USS-720 in this mode. The generic
+ USB printer driver ("USB Printer support", above) may be used in
+ that mode, and you can say N here if you want to use the chip only
+ in this mode.
+
+ Manual mode is not limited to printers, any parallel port
+ device should work. This driver utilizes manual mode.
+ Note however that some operations are three orders of magnitude
+ slower than on a PCI/ISA Parallel Port, so timing critical
+ applications might not work.
+
+ Say Y here if you own an USS-720 USB->Parport cable and intend to
+ connect anything other than a printer to it.
+
+ To compile this driver as a module, choose M here: the
+ module will be called uss720.
+
+source "drivers/usb/serial/Kconfig"
+
+source "drivers/usb/misc/Kconfig"
+
+source "drivers/usb/atm/Kconfig"
+
+endif # USB
+
+source "drivers/usb/phy/Kconfig"
+
+source "drivers/usb/gadget/Kconfig"
+
+source "drivers/usb/typec/Kconfig"
+
+source "drivers/usb/roles/Kconfig"
+
+endif # USB_SUPPORT