summaryrefslogtreecommitdiffstats
path: root/drivers/usb/class
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/usb/class/Kconfig49
-rw-r--r--drivers/usb/class/Makefile10
-rw-r--r--drivers/usb/class/cdc-acm.c2089
-rw-r--r--drivers/usb/class/cdc-acm.h115
-rw-r--r--drivers/usb/class/cdc-wdm.c1371
-rw-r--r--drivers/usb/class/usblp.c1474
-rw-r--r--drivers/usb/class/usbtmc.c2595
7 files changed, 7703 insertions, 0 deletions
diff --git a/drivers/usb/class/Kconfig b/drivers/usb/class/Kconfig
new file mode 100644
index 000000000..d3f5162bd
--- /dev/null
+++ b/drivers/usb/class/Kconfig
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# USB Class driver configuration
+#
+comment "USB Device Class drivers"
+
+config USB_ACM
+ tristate "USB Modem (CDC ACM) support"
+ depends on TTY
+ help
+ This driver supports USB modems and ISDN adapters which support the
+ Communication Device Class Abstract Control Model interface.
+ Please read <file:Documentation/usb/acm.rst> for details.
+
+ If your modem only reports "Cls=ff(vend.)" in the descriptors in
+ /sys/kernel/debug/usb/devices, then your modem will not work with this
+ driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cdc-acm.
+
+config USB_PRINTER
+ tristate "USB Printer support"
+ help
+ Say Y here if you want to connect a USB printer to your computer's
+ USB port.
+
+ To compile this driver as a module, choose M here: the
+ module will be called usblp.
+
+config USB_WDM
+ tristate "USB Wireless Device Management support"
+ help
+ This driver supports the WMC Device Management functionality
+ of cell phones compliant to the CDC WMC specification. You can use
+ AT commands over this device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cdc-wdm.
+
+config USB_TMC
+ tristate "USB Test and Measurement Class support"
+ help
+ Say Y here if you want to connect a USB device that follows
+ the USB.org specification for USB Test and Measurement devices
+ to your computer's USB port.
+
+ To compile this driver as a module, choose M here: the
+ module will be called usbtmc.
diff --git a/drivers/usb/class/Makefile b/drivers/usb/class/Makefile
new file mode 100644
index 000000000..5d393a28f
--- /dev/null
+++ b/drivers/usb/class/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for USB Class drivers
+# (one step up from the misc category)
+#
+
+obj-$(CONFIG_USB_ACM) += cdc-acm.o
+obj-$(CONFIG_USB_PRINTER) += usblp.o
+obj-$(CONFIG_USB_WDM) += cdc-wdm.o
+obj-$(CONFIG_USB_TMC) += usbtmc.o
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
new file mode 100644
index 000000000..2a7eea4e2
--- /dev/null
+++ b/drivers/usb/class/cdc-acm.c
@@ -0,0 +1,2089 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * cdc-acm.c
+ *
+ * Copyright (c) 1999 Armin Fuerst <fuerst@in.tum.de>
+ * Copyright (c) 1999 Pavel Machek <pavel@ucw.cz>
+ * Copyright (c) 1999 Johannes Erdfelt <johannes@erdfelt.com>
+ * Copyright (c) 2000 Vojtech Pavlik <vojtech@suse.cz>
+ * Copyright (c) 2004 Oliver Neukum <oliver@neukum.name>
+ * Copyright (c) 2005 David Kubicek <dave@awk.cz>
+ * Copyright (c) 2011 Johan Hovold <jhovold@gmail.com>
+ *
+ * USB Abstract Control Model driver for USB modems and ISDN adapters
+ *
+ * Sponsored by SuSE
+ */
+
+#undef DEBUG
+#undef VERBOSE_DEBUG
+
+#include <linux/kernel.h>
+#include <linux/sched/signal.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/log2.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+#include <linux/idr.h>
+#include <linux/list.h>
+
+#include "cdc-acm.h"
+
+
+#define DRIVER_AUTHOR "Armin Fuerst, Pavel Machek, Johannes Erdfelt, Vojtech Pavlik, David Kubicek, Johan Hovold"
+#define DRIVER_DESC "USB Abstract Control Model driver for USB modems and ISDN adapters"
+
+static struct usb_driver acm_driver;
+static struct tty_driver *acm_tty_driver;
+
+static DEFINE_IDR(acm_minors);
+static DEFINE_MUTEX(acm_minors_lock);
+
+static void acm_tty_set_termios(struct tty_struct *tty,
+ const struct ktermios *termios_old);
+
+/*
+ * acm_minors accessors
+ */
+
+/*
+ * Look up an ACM structure by minor. If found and not disconnected, increment
+ * its refcount and return it with its mutex held.
+ */
+static struct acm *acm_get_by_minor(unsigned int minor)
+{
+ struct acm *acm;
+
+ mutex_lock(&acm_minors_lock);
+ acm = idr_find(&acm_minors, minor);
+ if (acm) {
+ mutex_lock(&acm->mutex);
+ if (acm->disconnected) {
+ mutex_unlock(&acm->mutex);
+ acm = NULL;
+ } else {
+ tty_port_get(&acm->port);
+ mutex_unlock(&acm->mutex);
+ }
+ }
+ mutex_unlock(&acm_minors_lock);
+ return acm;
+}
+
+/*
+ * Try to find an available minor number and if found, associate it with 'acm'.
+ */
+static int acm_alloc_minor(struct acm *acm)
+{
+ int minor;
+
+ mutex_lock(&acm_minors_lock);
+ minor = idr_alloc(&acm_minors, acm, 0, ACM_TTY_MINORS, GFP_KERNEL);
+ mutex_unlock(&acm_minors_lock);
+
+ return minor;
+}
+
+/* Release the minor number associated with 'acm'. */
+static void acm_release_minor(struct acm *acm)
+{
+ mutex_lock(&acm_minors_lock);
+ idr_remove(&acm_minors, acm->minor);
+ mutex_unlock(&acm_minors_lock);
+}
+
+/*
+ * Functions for ACM control messages.
+ */
+
+static int acm_ctrl_msg(struct acm *acm, int request, int value,
+ void *buf, int len)
+{
+ int retval;
+
+ retval = usb_autopm_get_interface(acm->control);
+ if (retval)
+ return retval;
+
+ retval = usb_control_msg(acm->dev, usb_sndctrlpipe(acm->dev, 0),
+ request, USB_RT_ACM, value,
+ acm->control->altsetting[0].desc.bInterfaceNumber,
+ buf, len, USB_CTRL_SET_TIMEOUT);
+
+ dev_dbg(&acm->control->dev,
+ "%s - rq 0x%02x, val %#x, len %#x, result %d\n",
+ __func__, request, value, len, retval);
+
+ usb_autopm_put_interface(acm->control);
+
+ return retval < 0 ? retval : 0;
+}
+
+/* devices aren't required to support these requests.
+ * the cdc acm descriptor tells whether they do...
+ */
+static inline int acm_set_control(struct acm *acm, int control)
+{
+ if (acm->quirks & QUIRK_CONTROL_LINE_STATE)
+ return -EOPNOTSUPP;
+
+ return acm_ctrl_msg(acm, USB_CDC_REQ_SET_CONTROL_LINE_STATE,
+ control, NULL, 0);
+}
+
+#define acm_set_line(acm, line) \
+ acm_ctrl_msg(acm, USB_CDC_REQ_SET_LINE_CODING, 0, line, sizeof *(line))
+#define acm_send_break(acm, ms) \
+ acm_ctrl_msg(acm, USB_CDC_REQ_SEND_BREAK, ms, NULL, 0)
+
+static void acm_poison_urbs(struct acm *acm)
+{
+ int i;
+
+ usb_poison_urb(acm->ctrlurb);
+ for (i = 0; i < ACM_NW; i++)
+ usb_poison_urb(acm->wb[i].urb);
+ for (i = 0; i < acm->rx_buflimit; i++)
+ usb_poison_urb(acm->read_urbs[i]);
+}
+
+static void acm_unpoison_urbs(struct acm *acm)
+{
+ int i;
+
+ for (i = 0; i < acm->rx_buflimit; i++)
+ usb_unpoison_urb(acm->read_urbs[i]);
+ for (i = 0; i < ACM_NW; i++)
+ usb_unpoison_urb(acm->wb[i].urb);
+ usb_unpoison_urb(acm->ctrlurb);
+}
+
+
+/*
+ * Write buffer management.
+ * All of these assume proper locks taken by the caller.
+ */
+
+static int acm_wb_alloc(struct acm *acm)
+{
+ int i, wbn;
+ struct acm_wb *wb;
+
+ wbn = 0;
+ i = 0;
+ for (;;) {
+ wb = &acm->wb[wbn];
+ if (!wb->use) {
+ wb->use = true;
+ wb->len = 0;
+ return wbn;
+ }
+ wbn = (wbn + 1) % ACM_NW;
+ if (++i >= ACM_NW)
+ return -1;
+ }
+}
+
+static int acm_wb_is_avail(struct acm *acm)
+{
+ int i, n;
+ unsigned long flags;
+
+ n = ACM_NW;
+ spin_lock_irqsave(&acm->write_lock, flags);
+ for (i = 0; i < ACM_NW; i++)
+ if(acm->wb[i].use)
+ n--;
+ spin_unlock_irqrestore(&acm->write_lock, flags);
+ return n;
+}
+
+/*
+ * Finish write. Caller must hold acm->write_lock
+ */
+static void acm_write_done(struct acm *acm, struct acm_wb *wb)
+{
+ wb->use = false;
+ acm->transmitting--;
+ usb_autopm_put_interface_async(acm->control);
+}
+
+/*
+ * Poke write.
+ *
+ * the caller is responsible for locking
+ */
+
+static int acm_start_wb(struct acm *acm, struct acm_wb *wb)
+{
+ int rc;
+
+ acm->transmitting++;
+
+ wb->urb->transfer_buffer = wb->buf;
+ wb->urb->transfer_dma = wb->dmah;
+ wb->urb->transfer_buffer_length = wb->len;
+ wb->urb->dev = acm->dev;
+
+ rc = usb_submit_urb(wb->urb, GFP_ATOMIC);
+ if (rc < 0) {
+ if (rc != -EPERM)
+ dev_err(&acm->data->dev,
+ "%s - usb_submit_urb(write bulk) failed: %d\n",
+ __func__, rc);
+ acm_write_done(acm, wb);
+ }
+ return rc;
+}
+
+/*
+ * attributes exported through sysfs
+ */
+static ssize_t bmCapabilities_show
+(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct usb_interface *intf = to_usb_interface(dev);
+ struct acm *acm = usb_get_intfdata(intf);
+
+ return sprintf(buf, "%d", acm->ctrl_caps);
+}
+static DEVICE_ATTR_RO(bmCapabilities);
+
+static ssize_t wCountryCodes_show
+(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct usb_interface *intf = to_usb_interface(dev);
+ struct acm *acm = usb_get_intfdata(intf);
+
+ memcpy(buf, acm->country_codes, acm->country_code_size);
+ return acm->country_code_size;
+}
+
+static DEVICE_ATTR_RO(wCountryCodes);
+
+static ssize_t iCountryCodeRelDate_show
+(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct usb_interface *intf = to_usb_interface(dev);
+ struct acm *acm = usb_get_intfdata(intf);
+
+ return sprintf(buf, "%d", acm->country_rel_date);
+}
+
+static DEVICE_ATTR_RO(iCountryCodeRelDate);
+/*
+ * Interrupt handlers for various ACM device responses
+ */
+
+static void acm_process_notification(struct acm *acm, unsigned char *buf)
+{
+ int newctrl;
+ int difference;
+ unsigned long flags;
+ struct usb_cdc_notification *dr = (struct usb_cdc_notification *)buf;
+ unsigned char *data = buf + sizeof(struct usb_cdc_notification);
+
+ switch (dr->bNotificationType) {
+ case USB_CDC_NOTIFY_NETWORK_CONNECTION:
+ dev_dbg(&acm->control->dev,
+ "%s - network connection: %d\n", __func__, dr->wValue);
+ break;
+
+ case USB_CDC_NOTIFY_SERIAL_STATE:
+ if (le16_to_cpu(dr->wLength) != 2) {
+ dev_dbg(&acm->control->dev,
+ "%s - malformed serial state\n", __func__);
+ break;
+ }
+
+ newctrl = get_unaligned_le16(data);
+ dev_dbg(&acm->control->dev,
+ "%s - serial state: 0x%x\n", __func__, newctrl);
+
+ if (!acm->clocal && (acm->ctrlin & ~newctrl & USB_CDC_SERIAL_STATE_DCD)) {
+ dev_dbg(&acm->control->dev,
+ "%s - calling hangup\n", __func__);
+ tty_port_tty_hangup(&acm->port, false);
+ }
+
+ difference = acm->ctrlin ^ newctrl;
+ spin_lock_irqsave(&acm->read_lock, flags);
+ acm->ctrlin = newctrl;
+ acm->oldcount = acm->iocount;
+
+ if (difference & USB_CDC_SERIAL_STATE_DSR)
+ acm->iocount.dsr++;
+ if (difference & USB_CDC_SERIAL_STATE_DCD)
+ acm->iocount.dcd++;
+ if (newctrl & USB_CDC_SERIAL_STATE_BREAK) {
+ acm->iocount.brk++;
+ tty_insert_flip_char(&acm->port, 0, TTY_BREAK);
+ }
+ if (newctrl & USB_CDC_SERIAL_STATE_RING_SIGNAL)
+ acm->iocount.rng++;
+ if (newctrl & USB_CDC_SERIAL_STATE_FRAMING)
+ acm->iocount.frame++;
+ if (newctrl & USB_CDC_SERIAL_STATE_PARITY)
+ acm->iocount.parity++;
+ if (newctrl & USB_CDC_SERIAL_STATE_OVERRUN)
+ acm->iocount.overrun++;
+ spin_unlock_irqrestore(&acm->read_lock, flags);
+
+ if (newctrl & USB_CDC_SERIAL_STATE_BREAK)
+ tty_flip_buffer_push(&acm->port);
+
+ if (difference)
+ wake_up_all(&acm->wioctl);
+
+ break;
+
+ default:
+ dev_dbg(&acm->control->dev,
+ "%s - unknown notification %d received: index %d len %d\n",
+ __func__,
+ dr->bNotificationType, dr->wIndex, dr->wLength);
+ }
+}
+
+/* control interface reports status changes with "interrupt" transfers */
+static void acm_ctrl_irq(struct urb *urb)
+{
+ struct acm *acm = urb->context;
+ struct usb_cdc_notification *dr = urb->transfer_buffer;
+ unsigned int current_size = urb->actual_length;
+ unsigned int expected_size, copy_size, alloc_size;
+ int retval;
+ int status = urb->status;
+
+ switch (status) {
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dev_dbg(&acm->control->dev,
+ "%s - urb shutting down with status: %d\n",
+ __func__, status);
+ return;
+ default:
+ dev_dbg(&acm->control->dev,
+ "%s - nonzero urb status received: %d\n",
+ __func__, status);
+ goto exit;
+ }
+
+ usb_mark_last_busy(acm->dev);
+
+ if (acm->nb_index)
+ dr = (struct usb_cdc_notification *)acm->notification_buffer;
+
+ /* size = notification-header + (optional) data */
+ expected_size = sizeof(struct usb_cdc_notification) +
+ le16_to_cpu(dr->wLength);
+
+ if (current_size < expected_size) {
+ /* notification is transmitted fragmented, reassemble */
+ if (acm->nb_size < expected_size) {
+ u8 *new_buffer;
+ alloc_size = roundup_pow_of_two(expected_size);
+ /* Final freeing is done on disconnect. */
+ new_buffer = krealloc(acm->notification_buffer,
+ alloc_size, GFP_ATOMIC);
+ if (!new_buffer) {
+ acm->nb_index = 0;
+ goto exit;
+ }
+
+ acm->notification_buffer = new_buffer;
+ acm->nb_size = alloc_size;
+ dr = (struct usb_cdc_notification *)acm->notification_buffer;
+ }
+
+ copy_size = min(current_size,
+ expected_size - acm->nb_index);
+
+ memcpy(&acm->notification_buffer[acm->nb_index],
+ urb->transfer_buffer, copy_size);
+ acm->nb_index += copy_size;
+ current_size = acm->nb_index;
+ }
+
+ if (current_size >= expected_size) {
+ /* notification complete */
+ acm_process_notification(acm, (unsigned char *)dr);
+ acm->nb_index = 0;
+ }
+
+exit:
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
+ if (retval && retval != -EPERM && retval != -ENODEV)
+ dev_err(&acm->control->dev,
+ "%s - usb_submit_urb failed: %d\n", __func__, retval);
+ else
+ dev_vdbg(&acm->control->dev,
+ "control resubmission terminated %d\n", retval);
+}
+
+static int acm_submit_read_urb(struct acm *acm, int index, gfp_t mem_flags)
+{
+ int res;
+
+ if (!test_and_clear_bit(index, &acm->read_urbs_free))
+ return 0;
+
+ res = usb_submit_urb(acm->read_urbs[index], mem_flags);
+ if (res) {
+ if (res != -EPERM && res != -ENODEV) {
+ dev_err(&acm->data->dev,
+ "urb %d failed submission with %d\n",
+ index, res);
+ } else {
+ dev_vdbg(&acm->data->dev, "intended failure %d\n", res);
+ }
+ set_bit(index, &acm->read_urbs_free);
+ return res;
+ } else {
+ dev_vdbg(&acm->data->dev, "submitted urb %d\n", index);
+ }
+
+ return 0;
+}
+
+static int acm_submit_read_urbs(struct acm *acm, gfp_t mem_flags)
+{
+ int res;
+ int i;
+
+ for (i = 0; i < acm->rx_buflimit; ++i) {
+ res = acm_submit_read_urb(acm, i, mem_flags);
+ if (res)
+ return res;
+ }
+
+ return 0;
+}
+
+static void acm_process_read_urb(struct acm *acm, struct urb *urb)
+{
+ unsigned long flags;
+
+ if (!urb->actual_length)
+ return;
+
+ spin_lock_irqsave(&acm->read_lock, flags);
+ tty_insert_flip_string(&acm->port, urb->transfer_buffer,
+ urb->actual_length);
+ spin_unlock_irqrestore(&acm->read_lock, flags);
+
+ tty_flip_buffer_push(&acm->port);
+}
+
+static void acm_read_bulk_callback(struct urb *urb)
+{
+ struct acm_rb *rb = urb->context;
+ struct acm *acm = rb->instance;
+ int status = urb->status;
+ bool stopped = false;
+ bool stalled = false;
+ bool cooldown = false;
+
+ dev_vdbg(&acm->data->dev, "got urb %d, len %d, status %d\n",
+ rb->index, urb->actual_length, status);
+
+ switch (status) {
+ case 0:
+ usb_mark_last_busy(acm->dev);
+ acm_process_read_urb(acm, urb);
+ break;
+ case -EPIPE:
+ set_bit(EVENT_RX_STALL, &acm->flags);
+ stalled = true;
+ break;
+ case -ENOENT:
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+ dev_dbg(&acm->data->dev,
+ "%s - urb shutting down with status: %d\n",
+ __func__, status);
+ stopped = true;
+ break;
+ case -EOVERFLOW:
+ case -EPROTO:
+ dev_dbg(&acm->data->dev,
+ "%s - cooling babbling device\n", __func__);
+ usb_mark_last_busy(acm->dev);
+ set_bit(rb->index, &acm->urbs_in_error_delay);
+ set_bit(ACM_ERROR_DELAY, &acm->flags);
+ cooldown = true;
+ break;
+ default:
+ dev_dbg(&acm->data->dev,
+ "%s - nonzero urb status received: %d\n",
+ __func__, status);
+ break;
+ }
+
+ /*
+ * Make sure URB processing is done before marking as free to avoid
+ * racing with unthrottle() on another CPU. Matches the barriers
+ * implied by the test_and_clear_bit() in acm_submit_read_urb().
+ */
+ smp_mb__before_atomic();
+ set_bit(rb->index, &acm->read_urbs_free);
+ /*
+ * Make sure URB is marked as free before checking the throttled flag
+ * to avoid racing with unthrottle() on another CPU. Matches the
+ * smp_mb() in unthrottle().
+ */
+ smp_mb__after_atomic();
+
+ if (stopped || stalled || cooldown) {
+ if (stalled)
+ schedule_delayed_work(&acm->dwork, 0);
+ else if (cooldown)
+ schedule_delayed_work(&acm->dwork, HZ / 2);
+ return;
+ }
+
+ if (test_bit(ACM_THROTTLED, &acm->flags))
+ return;
+
+ acm_submit_read_urb(acm, rb->index, GFP_ATOMIC);
+}
+
+/* data interface wrote those outgoing bytes */
+static void acm_write_bulk(struct urb *urb)
+{
+ struct acm_wb *wb = urb->context;
+ struct acm *acm = wb->instance;
+ unsigned long flags;
+ int status = urb->status;
+
+ if (status || (urb->actual_length != urb->transfer_buffer_length))
+ dev_vdbg(&acm->data->dev, "wrote len %d/%d, status %d\n",
+ urb->actual_length,
+ urb->transfer_buffer_length,
+ status);
+
+ spin_lock_irqsave(&acm->write_lock, flags);
+ acm_write_done(acm, wb);
+ spin_unlock_irqrestore(&acm->write_lock, flags);
+ set_bit(EVENT_TTY_WAKEUP, &acm->flags);
+ schedule_delayed_work(&acm->dwork, 0);
+}
+
+static void acm_softint(struct work_struct *work)
+{
+ int i;
+ struct acm *acm = container_of(work, struct acm, dwork.work);
+
+ if (test_bit(EVENT_RX_STALL, &acm->flags)) {
+ smp_mb(); /* against acm_suspend() */
+ if (!acm->susp_count) {
+ for (i = 0; i < acm->rx_buflimit; i++)
+ usb_kill_urb(acm->read_urbs[i]);
+ usb_clear_halt(acm->dev, acm->in);
+ acm_submit_read_urbs(acm, GFP_KERNEL);
+ clear_bit(EVENT_RX_STALL, &acm->flags);
+ }
+ }
+
+ if (test_and_clear_bit(ACM_ERROR_DELAY, &acm->flags)) {
+ for (i = 0; i < acm->rx_buflimit; i++)
+ if (test_and_clear_bit(i, &acm->urbs_in_error_delay))
+ acm_submit_read_urb(acm, i, GFP_KERNEL);
+ }
+
+ if (test_and_clear_bit(EVENT_TTY_WAKEUP, &acm->flags))
+ tty_port_tty_wakeup(&acm->port);
+}
+
+/*
+ * TTY handlers
+ */
+
+static int acm_tty_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+ struct acm *acm;
+ int retval;
+
+ acm = acm_get_by_minor(tty->index);
+ if (!acm)
+ return -ENODEV;
+
+ retval = tty_standard_install(driver, tty);
+ if (retval)
+ goto error_init_termios;
+
+ /*
+ * Suppress initial echoing for some devices which might send data
+ * immediately after acm driver has been installed.
+ */
+ if (acm->quirks & DISABLE_ECHO)
+ tty->termios.c_lflag &= ~ECHO;
+
+ tty->driver_data = acm;
+
+ return 0;
+
+error_init_termios:
+ tty_port_put(&acm->port);
+ return retval;
+}
+
+static int acm_tty_open(struct tty_struct *tty, struct file *filp)
+{
+ struct acm *acm = tty->driver_data;
+
+ return tty_port_open(&acm->port, tty, filp);
+}
+
+static void acm_port_dtr_rts(struct tty_port *port, int raise)
+{
+ struct acm *acm = container_of(port, struct acm, port);
+ int val;
+ int res;
+
+ if (raise)
+ val = USB_CDC_CTRL_DTR | USB_CDC_CTRL_RTS;
+ else
+ val = 0;
+
+ /* FIXME: add missing ctrlout locking throughout driver */
+ acm->ctrlout = val;
+
+ res = acm_set_control(acm, val);
+ if (res && (acm->ctrl_caps & USB_CDC_CAP_LINE))
+ /* This is broken in too many devices to spam the logs */
+ dev_dbg(&acm->control->dev, "failed to set dtr/rts\n");
+}
+
+static int acm_port_activate(struct tty_port *port, struct tty_struct *tty)
+{
+ struct acm *acm = container_of(port, struct acm, port);
+ int retval = -ENODEV;
+ int i;
+
+ mutex_lock(&acm->mutex);
+ if (acm->disconnected)
+ goto disconnected;
+
+ retval = usb_autopm_get_interface(acm->control);
+ if (retval)
+ goto error_get_interface;
+
+ set_bit(TTY_NO_WRITE_SPLIT, &tty->flags);
+ acm->control->needs_remote_wakeup = 1;
+
+ acm->ctrlurb->dev = acm->dev;
+ retval = usb_submit_urb(acm->ctrlurb, GFP_KERNEL);
+ if (retval) {
+ dev_err(&acm->control->dev,
+ "%s - usb_submit_urb(ctrl irq) failed\n", __func__);
+ goto error_submit_urb;
+ }
+
+ acm_tty_set_termios(tty, NULL);
+
+ /*
+ * Unthrottle device in case the TTY was closed while throttled.
+ */
+ clear_bit(ACM_THROTTLED, &acm->flags);
+
+ retval = acm_submit_read_urbs(acm, GFP_KERNEL);
+ if (retval)
+ goto error_submit_read_urbs;
+
+ usb_autopm_put_interface(acm->control);
+
+ mutex_unlock(&acm->mutex);
+
+ return 0;
+
+error_submit_read_urbs:
+ for (i = 0; i < acm->rx_buflimit; i++)
+ usb_kill_urb(acm->read_urbs[i]);
+ usb_kill_urb(acm->ctrlurb);
+error_submit_urb:
+ usb_autopm_put_interface(acm->control);
+error_get_interface:
+disconnected:
+ mutex_unlock(&acm->mutex);
+
+ return usb_translate_errors(retval);
+}
+
+static void acm_port_destruct(struct tty_port *port)
+{
+ struct acm *acm = container_of(port, struct acm, port);
+
+ if (acm->minor != ACM_MINOR_INVALID)
+ acm_release_minor(acm);
+ usb_put_intf(acm->control);
+ kfree(acm->country_codes);
+ kfree(acm);
+}
+
+static void acm_port_shutdown(struct tty_port *port)
+{
+ struct acm *acm = container_of(port, struct acm, port);
+ struct urb *urb;
+ struct acm_wb *wb;
+
+ /*
+ * Need to grab write_lock to prevent race with resume, but no need to
+ * hold it due to the tty-port initialised flag.
+ */
+ acm_poison_urbs(acm);
+ spin_lock_irq(&acm->write_lock);
+ spin_unlock_irq(&acm->write_lock);
+
+ usb_autopm_get_interface_no_resume(acm->control);
+ acm->control->needs_remote_wakeup = 0;
+ usb_autopm_put_interface(acm->control);
+
+ for (;;) {
+ urb = usb_get_from_anchor(&acm->delayed);
+ if (!urb)
+ break;
+ wb = urb->context;
+ wb->use = false;
+ usb_autopm_put_interface_async(acm->control);
+ }
+
+ acm_unpoison_urbs(acm);
+
+}
+
+static void acm_tty_cleanup(struct tty_struct *tty)
+{
+ struct acm *acm = tty->driver_data;
+
+ tty_port_put(&acm->port);
+}
+
+static void acm_tty_hangup(struct tty_struct *tty)
+{
+ struct acm *acm = tty->driver_data;
+
+ tty_port_hangup(&acm->port);
+}
+
+static void acm_tty_close(struct tty_struct *tty, struct file *filp)
+{
+ struct acm *acm = tty->driver_data;
+
+ tty_port_close(&acm->port, tty, filp);
+}
+
+static int acm_tty_write(struct tty_struct *tty,
+ const unsigned char *buf, int count)
+{
+ struct acm *acm = tty->driver_data;
+ int stat;
+ unsigned long flags;
+ int wbn;
+ struct acm_wb *wb;
+
+ if (!count)
+ return 0;
+
+ dev_vdbg(&acm->data->dev, "%d bytes from tty layer\n", count);
+
+ spin_lock_irqsave(&acm->write_lock, flags);
+ wbn = acm_wb_alloc(acm);
+ if (wbn < 0) {
+ spin_unlock_irqrestore(&acm->write_lock, flags);
+ return 0;
+ }
+ wb = &acm->wb[wbn];
+
+ if (!acm->dev) {
+ wb->use = false;
+ spin_unlock_irqrestore(&acm->write_lock, flags);
+ return -ENODEV;
+ }
+
+ count = (count > acm->writesize) ? acm->writesize : count;
+ dev_vdbg(&acm->data->dev, "writing %d bytes\n", count);
+ memcpy(wb->buf, buf, count);
+ wb->len = count;
+
+ stat = usb_autopm_get_interface_async(acm->control);
+ if (stat) {
+ wb->use = false;
+ spin_unlock_irqrestore(&acm->write_lock, flags);
+ return stat;
+ }
+
+ if (acm->susp_count) {
+ usb_anchor_urb(wb->urb, &acm->delayed);
+ spin_unlock_irqrestore(&acm->write_lock, flags);
+ return count;
+ }
+
+ stat = acm_start_wb(acm, wb);
+ spin_unlock_irqrestore(&acm->write_lock, flags);
+
+ if (stat < 0)
+ return stat;
+ return count;
+}
+
+static unsigned int acm_tty_write_room(struct tty_struct *tty)
+{
+ struct acm *acm = tty->driver_data;
+ /*
+ * Do not let the line discipline to know that we have a reserve,
+ * or it might get too enthusiastic.
+ */
+ return acm_wb_is_avail(acm) ? acm->writesize : 0;
+}
+
+static unsigned int acm_tty_chars_in_buffer(struct tty_struct *tty)
+{
+ struct acm *acm = tty->driver_data;
+ /*
+ * if the device was unplugged then any remaining characters fell out
+ * of the connector ;)
+ */
+ if (acm->disconnected)
+ return 0;
+ /*
+ * This is inaccurate (overcounts), but it works.
+ */
+ return (ACM_NW - acm_wb_is_avail(acm)) * acm->writesize;
+}
+
+static void acm_tty_throttle(struct tty_struct *tty)
+{
+ struct acm *acm = tty->driver_data;
+
+ set_bit(ACM_THROTTLED, &acm->flags);
+}
+
+static void acm_tty_unthrottle(struct tty_struct *tty)
+{
+ struct acm *acm = tty->driver_data;
+
+ clear_bit(ACM_THROTTLED, &acm->flags);
+
+ /* Matches the smp_mb__after_atomic() in acm_read_bulk_callback(). */
+ smp_mb();
+
+ acm_submit_read_urbs(acm, GFP_KERNEL);
+}
+
+static int acm_tty_break_ctl(struct tty_struct *tty, int state)
+{
+ struct acm *acm = tty->driver_data;
+ int retval;
+
+ if (!(acm->ctrl_caps & USB_CDC_CAP_BRK))
+ return -EOPNOTSUPP;
+
+ retval = acm_send_break(acm, state ? 0xffff : 0);
+ if (retval < 0)
+ dev_dbg(&acm->control->dev,
+ "%s - send break failed\n", __func__);
+ return retval;
+}
+
+static int acm_tty_tiocmget(struct tty_struct *tty)
+{
+ struct acm *acm = tty->driver_data;
+
+ return (acm->ctrlout & USB_CDC_CTRL_DTR ? TIOCM_DTR : 0) |
+ (acm->ctrlout & USB_CDC_CTRL_RTS ? TIOCM_RTS : 0) |
+ (acm->ctrlin & USB_CDC_SERIAL_STATE_DSR ? TIOCM_DSR : 0) |
+ (acm->ctrlin & USB_CDC_SERIAL_STATE_RING_SIGNAL ? TIOCM_RI : 0) |
+ (acm->ctrlin & USB_CDC_SERIAL_STATE_DCD ? TIOCM_CD : 0) |
+ TIOCM_CTS;
+}
+
+static int acm_tty_tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear)
+{
+ struct acm *acm = tty->driver_data;
+ unsigned int newctrl;
+
+ newctrl = acm->ctrlout;
+ set = (set & TIOCM_DTR ? USB_CDC_CTRL_DTR : 0) |
+ (set & TIOCM_RTS ? USB_CDC_CTRL_RTS : 0);
+ clear = (clear & TIOCM_DTR ? USB_CDC_CTRL_DTR : 0) |
+ (clear & TIOCM_RTS ? USB_CDC_CTRL_RTS : 0);
+
+ newctrl = (newctrl & ~clear) | set;
+
+ if (acm->ctrlout == newctrl)
+ return 0;
+ return acm_set_control(acm, acm->ctrlout = newctrl);
+}
+
+static int get_serial_info(struct tty_struct *tty, struct serial_struct *ss)
+{
+ struct acm *acm = tty->driver_data;
+
+ ss->line = acm->minor;
+ ss->close_delay = jiffies_to_msecs(acm->port.close_delay) / 10;
+ ss->closing_wait = acm->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+ ASYNC_CLOSING_WAIT_NONE :
+ jiffies_to_msecs(acm->port.closing_wait) / 10;
+ return 0;
+}
+
+static int set_serial_info(struct tty_struct *tty, struct serial_struct *ss)
+{
+ struct acm *acm = tty->driver_data;
+ unsigned int closing_wait, close_delay;
+ int retval = 0;
+
+ close_delay = msecs_to_jiffies(ss->close_delay * 10);
+ closing_wait = ss->closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+ ASYNC_CLOSING_WAIT_NONE :
+ msecs_to_jiffies(ss->closing_wait * 10);
+
+ mutex_lock(&acm->port.mutex);
+
+ if (!capable(CAP_SYS_ADMIN)) {
+ if ((close_delay != acm->port.close_delay) ||
+ (closing_wait != acm->port.closing_wait))
+ retval = -EPERM;
+ } else {
+ acm->port.close_delay = close_delay;
+ acm->port.closing_wait = closing_wait;
+ }
+
+ mutex_unlock(&acm->port.mutex);
+ return retval;
+}
+
+static int wait_serial_change(struct acm *acm, unsigned long arg)
+{
+ int rv = 0;
+ DECLARE_WAITQUEUE(wait, current);
+ struct async_icount old, new;
+
+ do {
+ spin_lock_irq(&acm->read_lock);
+ old = acm->oldcount;
+ new = acm->iocount;
+ acm->oldcount = new;
+ spin_unlock_irq(&acm->read_lock);
+
+ if ((arg & TIOCM_DSR) &&
+ old.dsr != new.dsr)
+ break;
+ if ((arg & TIOCM_CD) &&
+ old.dcd != new.dcd)
+ break;
+ if ((arg & TIOCM_RI) &&
+ old.rng != new.rng)
+ break;
+
+ add_wait_queue(&acm->wioctl, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule();
+ remove_wait_queue(&acm->wioctl, &wait);
+ if (acm->disconnected) {
+ if (arg & TIOCM_CD)
+ break;
+ else
+ rv = -ENODEV;
+ } else {
+ if (signal_pending(current))
+ rv = -ERESTARTSYS;
+ }
+ } while (!rv);
+
+
+
+ return rv;
+}
+
+static int acm_tty_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+{
+ struct acm *acm = tty->driver_data;
+
+ icount->dsr = acm->iocount.dsr;
+ icount->rng = acm->iocount.rng;
+ icount->dcd = acm->iocount.dcd;
+ icount->frame = acm->iocount.frame;
+ icount->overrun = acm->iocount.overrun;
+ icount->parity = acm->iocount.parity;
+ icount->brk = acm->iocount.brk;
+
+ return 0;
+}
+
+static int acm_tty_ioctl(struct tty_struct *tty,
+ unsigned int cmd, unsigned long arg)
+{
+ struct acm *acm = tty->driver_data;
+ int rv = -ENOIOCTLCMD;
+
+ switch (cmd) {
+ case TIOCMIWAIT:
+ rv = usb_autopm_get_interface(acm->control);
+ if (rv < 0) {
+ rv = -EIO;
+ break;
+ }
+ rv = wait_serial_change(acm, arg);
+ usb_autopm_put_interface(acm->control);
+ break;
+ }
+
+ return rv;
+}
+
+static void acm_tty_set_termios(struct tty_struct *tty,
+ const struct ktermios *termios_old)
+{
+ struct acm *acm = tty->driver_data;
+ struct ktermios *termios = &tty->termios;
+ struct usb_cdc_line_coding newline;
+ int newctrl = acm->ctrlout;
+
+ newline.dwDTERate = cpu_to_le32(tty_get_baud_rate(tty));
+ newline.bCharFormat = termios->c_cflag & CSTOPB ? 2 : 0;
+ newline.bParityType = termios->c_cflag & PARENB ?
+ (termios->c_cflag & PARODD ? 1 : 2) +
+ (termios->c_cflag & CMSPAR ? 2 : 0) : 0;
+ newline.bDataBits = tty_get_char_size(termios->c_cflag);
+
+ /* FIXME: Needs to clear unsupported bits in the termios */
+ acm->clocal = ((termios->c_cflag & CLOCAL) != 0);
+
+ if (C_BAUD(tty) == B0) {
+ newline.dwDTERate = acm->line.dwDTERate;
+ newctrl &= ~USB_CDC_CTRL_DTR;
+ } else if (termios_old && (termios_old->c_cflag & CBAUD) == B0) {
+ newctrl |= USB_CDC_CTRL_DTR;
+ }
+
+ if (newctrl != acm->ctrlout)
+ acm_set_control(acm, acm->ctrlout = newctrl);
+
+ if (memcmp(&acm->line, &newline, sizeof newline)) {
+ memcpy(&acm->line, &newline, sizeof newline);
+ dev_dbg(&acm->control->dev, "%s - set line: %d %d %d %d\n",
+ __func__,
+ le32_to_cpu(newline.dwDTERate),
+ newline.bCharFormat, newline.bParityType,
+ newline.bDataBits);
+ acm_set_line(acm, &acm->line);
+ }
+}
+
+static const struct tty_port_operations acm_port_ops = {
+ .dtr_rts = acm_port_dtr_rts,
+ .shutdown = acm_port_shutdown,
+ .activate = acm_port_activate,
+ .destruct = acm_port_destruct,
+};
+
+/*
+ * USB probe and disconnect routines.
+ */
+
+/* Little helpers: write/read buffers free */
+static void acm_write_buffers_free(struct acm *acm)
+{
+ int i;
+ struct acm_wb *wb;
+
+ for (wb = &acm->wb[0], i = 0; i < ACM_NW; i++, wb++)
+ usb_free_coherent(acm->dev, acm->writesize, wb->buf, wb->dmah);
+}
+
+static void acm_read_buffers_free(struct acm *acm)
+{
+ int i;
+
+ for (i = 0; i < acm->rx_buflimit; i++)
+ usb_free_coherent(acm->dev, acm->readsize,
+ acm->read_buffers[i].base, acm->read_buffers[i].dma);
+}
+
+/* Little helper: write buffers allocate */
+static int acm_write_buffers_alloc(struct acm *acm)
+{
+ int i;
+ struct acm_wb *wb;
+
+ for (wb = &acm->wb[0], i = 0; i < ACM_NW; i++, wb++) {
+ wb->buf = usb_alloc_coherent(acm->dev, acm->writesize, GFP_KERNEL,
+ &wb->dmah);
+ if (!wb->buf) {
+ while (i != 0) {
+ --i;
+ --wb;
+ usb_free_coherent(acm->dev, acm->writesize,
+ wb->buf, wb->dmah);
+ }
+ return -ENOMEM;
+ }
+ }
+ return 0;
+}
+
+static int acm_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_cdc_union_desc *union_header = NULL;
+ struct usb_cdc_call_mgmt_descriptor *cmgmd = NULL;
+ unsigned char *buffer = intf->altsetting->extra;
+ int buflen = intf->altsetting->extralen;
+ struct usb_interface *control_interface;
+ struct usb_interface *data_interface;
+ struct usb_endpoint_descriptor *epctrl = NULL;
+ struct usb_endpoint_descriptor *epread = NULL;
+ struct usb_endpoint_descriptor *epwrite = NULL;
+ struct usb_device *usb_dev = interface_to_usbdev(intf);
+ struct usb_cdc_parsed_header h;
+ struct acm *acm;
+ int minor;
+ int ctrlsize, readsize;
+ u8 *buf;
+ int call_intf_num = -1;
+ int data_intf_num = -1;
+ unsigned long quirks;
+ int num_rx_buf;
+ int i;
+ int combined_interfaces = 0;
+ struct device *tty_dev;
+ int rv = -ENOMEM;
+ int res;
+
+ /* normal quirks */
+ quirks = (unsigned long)id->driver_info;
+
+ if (quirks == IGNORE_DEVICE)
+ return -ENODEV;
+
+ memset(&h, 0x00, sizeof(struct usb_cdc_parsed_header));
+
+ num_rx_buf = (quirks == SINGLE_RX_URB) ? 1 : ACM_NR;
+
+ /* handle quirks deadly to normal probing*/
+ if (quirks == NO_UNION_NORMAL) {
+ data_interface = usb_ifnum_to_if(usb_dev, 1);
+ control_interface = usb_ifnum_to_if(usb_dev, 0);
+ /* we would crash */
+ if (!data_interface || !control_interface)
+ return -ENODEV;
+ goto skip_normal_probe;
+ }
+
+ /* normal probing*/
+ if (!buffer) {
+ dev_err(&intf->dev, "Weird descriptor references\n");
+ return -EINVAL;
+ }
+
+ if (!buflen) {
+ if (intf->cur_altsetting->endpoint &&
+ intf->cur_altsetting->endpoint->extralen &&
+ intf->cur_altsetting->endpoint->extra) {
+ dev_dbg(&intf->dev,
+ "Seeking extra descriptors on endpoint\n");
+ buflen = intf->cur_altsetting->endpoint->extralen;
+ buffer = intf->cur_altsetting->endpoint->extra;
+ } else {
+ dev_err(&intf->dev,
+ "Zero length descriptor references\n");
+ return -EINVAL;
+ }
+ }
+
+ cdc_parse_cdc_header(&h, intf, buffer, buflen);
+ union_header = h.usb_cdc_union_desc;
+ cmgmd = h.usb_cdc_call_mgmt_descriptor;
+ if (cmgmd)
+ call_intf_num = cmgmd->bDataInterface;
+
+ if (!union_header) {
+ if (intf->cur_altsetting->desc.bNumEndpoints == 3) {
+ dev_dbg(&intf->dev, "No union descriptor, assuming single interface\n");
+ combined_interfaces = 1;
+ control_interface = data_interface = intf;
+ goto look_for_collapsed_interface;
+ } else if (call_intf_num > 0) {
+ dev_dbg(&intf->dev, "No union descriptor, using call management descriptor\n");
+ data_intf_num = call_intf_num;
+ data_interface = usb_ifnum_to_if(usb_dev, data_intf_num);
+ control_interface = intf;
+ } else {
+ dev_dbg(&intf->dev, "No union descriptor, giving up\n");
+ return -ENODEV;
+ }
+ } else {
+ int class = -1;
+
+ data_intf_num = union_header->bSlaveInterface0;
+ control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
+ data_interface = usb_ifnum_to_if(usb_dev, data_intf_num);
+
+ if (control_interface)
+ class = control_interface->cur_altsetting->desc.bInterfaceClass;
+
+ if (class != USB_CLASS_COMM && class != USB_CLASS_CDC_DATA) {
+ dev_dbg(&intf->dev, "Broken union descriptor, assuming single interface\n");
+ combined_interfaces = 1;
+ control_interface = data_interface = intf;
+ goto look_for_collapsed_interface;
+ }
+ }
+
+ if (!control_interface || !data_interface) {
+ dev_dbg(&intf->dev, "no interfaces\n");
+ return -ENODEV;
+ }
+
+ if (data_intf_num != call_intf_num)
+ dev_dbg(&intf->dev, "Separate call control interface. That is not fully supported.\n");
+
+ if (control_interface == data_interface) {
+ /* some broken devices designed for windows work this way */
+ dev_warn(&intf->dev,"Control and data interfaces are not separated!\n");
+ combined_interfaces = 1;
+ /* a popular other OS doesn't use it */
+ quirks |= NO_CAP_LINE;
+ if (data_interface->cur_altsetting->desc.bNumEndpoints != 3) {
+ dev_err(&intf->dev, "This needs exactly 3 endpoints\n");
+ return -EINVAL;
+ }
+look_for_collapsed_interface:
+ res = usb_find_common_endpoints(data_interface->cur_altsetting,
+ &epread, &epwrite, &epctrl, NULL);
+ if (res)
+ return res;
+
+ goto made_compressed_probe;
+ }
+
+skip_normal_probe:
+
+ /*workaround for switched interfaces */
+ if (data_interface->cur_altsetting->desc.bInterfaceClass != USB_CLASS_CDC_DATA) {
+ if (control_interface->cur_altsetting->desc.bInterfaceClass == USB_CLASS_CDC_DATA) {
+ dev_dbg(&intf->dev,
+ "Your device has switched interfaces.\n");
+ swap(control_interface, data_interface);
+ } else {
+ return -EINVAL;
+ }
+ }
+
+ /* Accept probe requests only for the control interface */
+ if (!combined_interfaces && intf != control_interface)
+ return -ENODEV;
+
+ if (data_interface->cur_altsetting->desc.bNumEndpoints < 2 ||
+ control_interface->cur_altsetting->desc.bNumEndpoints == 0)
+ return -EINVAL;
+
+ epctrl = &control_interface->cur_altsetting->endpoint[0].desc;
+ epread = &data_interface->cur_altsetting->endpoint[0].desc;
+ epwrite = &data_interface->cur_altsetting->endpoint[1].desc;
+
+
+ /* workaround for switched endpoints */
+ if (!usb_endpoint_dir_in(epread)) {
+ /* descriptors are swapped */
+ dev_dbg(&intf->dev,
+ "The data interface has switched endpoints\n");
+ swap(epread, epwrite);
+ }
+made_compressed_probe:
+ dev_dbg(&intf->dev, "interfaces are valid\n");
+
+ acm = kzalloc(sizeof(struct acm), GFP_KERNEL);
+ if (!acm)
+ return -ENOMEM;
+
+ tty_port_init(&acm->port);
+ acm->port.ops = &acm_port_ops;
+
+ ctrlsize = usb_endpoint_maxp(epctrl);
+ readsize = usb_endpoint_maxp(epread) *
+ (quirks == SINGLE_RX_URB ? 1 : 2);
+ acm->combined_interfaces = combined_interfaces;
+ acm->writesize = usb_endpoint_maxp(epwrite) * 20;
+ acm->control = control_interface;
+ acm->data = data_interface;
+
+ usb_get_intf(acm->control); /* undone in destruct() */
+
+ minor = acm_alloc_minor(acm);
+ if (minor < 0) {
+ acm->minor = ACM_MINOR_INVALID;
+ goto err_put_port;
+ }
+
+ acm->minor = minor;
+ acm->dev = usb_dev;
+ if (h.usb_cdc_acm_descriptor)
+ acm->ctrl_caps = h.usb_cdc_acm_descriptor->bmCapabilities;
+ if (quirks & NO_CAP_LINE)
+ acm->ctrl_caps &= ~USB_CDC_CAP_LINE;
+ acm->ctrlsize = ctrlsize;
+ acm->readsize = readsize;
+ acm->rx_buflimit = num_rx_buf;
+ INIT_DELAYED_WORK(&acm->dwork, acm_softint);
+ init_waitqueue_head(&acm->wioctl);
+ spin_lock_init(&acm->write_lock);
+ spin_lock_init(&acm->read_lock);
+ mutex_init(&acm->mutex);
+ if (usb_endpoint_xfer_int(epread)) {
+ acm->bInterval = epread->bInterval;
+ acm->in = usb_rcvintpipe(usb_dev, epread->bEndpointAddress);
+ } else {
+ acm->in = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress);
+ }
+ if (usb_endpoint_xfer_int(epwrite))
+ acm->out = usb_sndintpipe(usb_dev, epwrite->bEndpointAddress);
+ else
+ acm->out = usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress);
+ init_usb_anchor(&acm->delayed);
+ acm->quirks = quirks;
+
+ buf = usb_alloc_coherent(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
+ if (!buf)
+ goto err_put_port;
+ acm->ctrl_buffer = buf;
+
+ if (acm_write_buffers_alloc(acm) < 0)
+ goto err_free_ctrl_buffer;
+
+ acm->ctrlurb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!acm->ctrlurb)
+ goto err_free_write_buffers;
+
+ for (i = 0; i < num_rx_buf; i++) {
+ struct acm_rb *rb = &(acm->read_buffers[i]);
+ struct urb *urb;
+
+ rb->base = usb_alloc_coherent(acm->dev, readsize, GFP_KERNEL,
+ &rb->dma);
+ if (!rb->base)
+ goto err_free_read_urbs;
+ rb->index = i;
+ rb->instance = acm;
+
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!urb)
+ goto err_free_read_urbs;
+
+ urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ urb->transfer_dma = rb->dma;
+ if (usb_endpoint_xfer_int(epread))
+ usb_fill_int_urb(urb, acm->dev, acm->in, rb->base,
+ acm->readsize,
+ acm_read_bulk_callback, rb,
+ acm->bInterval);
+ else
+ usb_fill_bulk_urb(urb, acm->dev, acm->in, rb->base,
+ acm->readsize,
+ acm_read_bulk_callback, rb);
+
+ acm->read_urbs[i] = urb;
+ __set_bit(i, &acm->read_urbs_free);
+ }
+ for (i = 0; i < ACM_NW; i++) {
+ struct acm_wb *snd = &(acm->wb[i]);
+
+ snd->urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!snd->urb)
+ goto err_free_write_urbs;
+
+ if (usb_endpoint_xfer_int(epwrite))
+ usb_fill_int_urb(snd->urb, usb_dev, acm->out,
+ NULL, acm->writesize, acm_write_bulk, snd, epwrite->bInterval);
+ else
+ usb_fill_bulk_urb(snd->urb, usb_dev, acm->out,
+ NULL, acm->writesize, acm_write_bulk, snd);
+ snd->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ if (quirks & SEND_ZERO_PACKET)
+ snd->urb->transfer_flags |= URB_ZERO_PACKET;
+ snd->instance = acm;
+ }
+
+ usb_set_intfdata(intf, acm);
+
+ i = device_create_file(&intf->dev, &dev_attr_bmCapabilities);
+ if (i < 0)
+ goto err_free_write_urbs;
+
+ if (h.usb_cdc_country_functional_desc) { /* export the country data */
+ struct usb_cdc_country_functional_desc * cfd =
+ h.usb_cdc_country_functional_desc;
+
+ acm->country_codes = kmalloc(cfd->bLength - 4, GFP_KERNEL);
+ if (!acm->country_codes)
+ goto skip_countries;
+ acm->country_code_size = cfd->bLength - 4;
+ memcpy(acm->country_codes, (u8 *)&cfd->wCountyCode0,
+ cfd->bLength - 4);
+ acm->country_rel_date = cfd->iCountryCodeRelDate;
+
+ i = device_create_file(&intf->dev, &dev_attr_wCountryCodes);
+ if (i < 0) {
+ kfree(acm->country_codes);
+ acm->country_codes = NULL;
+ acm->country_code_size = 0;
+ goto skip_countries;
+ }
+
+ i = device_create_file(&intf->dev,
+ &dev_attr_iCountryCodeRelDate);
+ if (i < 0) {
+ device_remove_file(&intf->dev, &dev_attr_wCountryCodes);
+ kfree(acm->country_codes);
+ acm->country_codes = NULL;
+ acm->country_code_size = 0;
+ goto skip_countries;
+ }
+ }
+
+skip_countries:
+ usb_fill_int_urb(acm->ctrlurb, usb_dev,
+ usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress),
+ acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm,
+ /* works around buggy devices */
+ epctrl->bInterval ? epctrl->bInterval : 16);
+ acm->ctrlurb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ acm->ctrlurb->transfer_dma = acm->ctrl_dma;
+ acm->notification_buffer = NULL;
+ acm->nb_index = 0;
+ acm->nb_size = 0;
+
+ acm->line.dwDTERate = cpu_to_le32(9600);
+ acm->line.bDataBits = 8;
+ acm_set_line(acm, &acm->line);
+
+ if (!acm->combined_interfaces) {
+ rv = usb_driver_claim_interface(&acm_driver, data_interface, acm);
+ if (rv)
+ goto err_remove_files;
+ }
+
+ tty_dev = tty_port_register_device(&acm->port, acm_tty_driver, minor,
+ &control_interface->dev);
+ if (IS_ERR(tty_dev)) {
+ rv = PTR_ERR(tty_dev);
+ goto err_release_data_interface;
+ }
+
+ if (quirks & CLEAR_HALT_CONDITIONS) {
+ usb_clear_halt(usb_dev, acm->in);
+ usb_clear_halt(usb_dev, acm->out);
+ }
+
+ dev_info(&intf->dev, "ttyACM%d: USB ACM device\n", minor);
+
+ return 0;
+
+err_release_data_interface:
+ if (!acm->combined_interfaces) {
+ /* Clear driver data so that disconnect() returns early. */
+ usb_set_intfdata(data_interface, NULL);
+ usb_driver_release_interface(&acm_driver, data_interface);
+ }
+err_remove_files:
+ if (acm->country_codes) {
+ device_remove_file(&acm->control->dev,
+ &dev_attr_wCountryCodes);
+ device_remove_file(&acm->control->dev,
+ &dev_attr_iCountryCodeRelDate);
+ }
+ device_remove_file(&acm->control->dev, &dev_attr_bmCapabilities);
+err_free_write_urbs:
+ for (i = 0; i < ACM_NW; i++)
+ usb_free_urb(acm->wb[i].urb);
+err_free_read_urbs:
+ for (i = 0; i < num_rx_buf; i++)
+ usb_free_urb(acm->read_urbs[i]);
+ acm_read_buffers_free(acm);
+ usb_free_urb(acm->ctrlurb);
+err_free_write_buffers:
+ acm_write_buffers_free(acm);
+err_free_ctrl_buffer:
+ usb_free_coherent(usb_dev, ctrlsize, acm->ctrl_buffer, acm->ctrl_dma);
+err_put_port:
+ tty_port_put(&acm->port);
+
+ return rv;
+}
+
+static void acm_disconnect(struct usb_interface *intf)
+{
+ struct acm *acm = usb_get_intfdata(intf);
+ struct tty_struct *tty;
+ int i;
+
+ /* sibling interface is already cleaning up */
+ if (!acm)
+ return;
+
+ acm->disconnected = true;
+ /*
+ * there is a circular dependency. acm_softint() can resubmit
+ * the URBs in error handling so we need to block any
+ * submission right away
+ */
+ acm_poison_urbs(acm);
+ mutex_lock(&acm->mutex);
+ if (acm->country_codes) {
+ device_remove_file(&acm->control->dev,
+ &dev_attr_wCountryCodes);
+ device_remove_file(&acm->control->dev,
+ &dev_attr_iCountryCodeRelDate);
+ }
+ wake_up_all(&acm->wioctl);
+ device_remove_file(&acm->control->dev, &dev_attr_bmCapabilities);
+ usb_set_intfdata(acm->control, NULL);
+ usb_set_intfdata(acm->data, NULL);
+ mutex_unlock(&acm->mutex);
+
+ tty = tty_port_tty_get(&acm->port);
+ if (tty) {
+ tty_vhangup(tty);
+ tty_kref_put(tty);
+ }
+
+ cancel_delayed_work_sync(&acm->dwork);
+
+ tty_unregister_device(acm_tty_driver, acm->minor);
+
+ usb_free_urb(acm->ctrlurb);
+ for (i = 0; i < ACM_NW; i++)
+ usb_free_urb(acm->wb[i].urb);
+ for (i = 0; i < acm->rx_buflimit; i++)
+ usb_free_urb(acm->read_urbs[i]);
+ acm_write_buffers_free(acm);
+ usb_free_coherent(acm->dev, acm->ctrlsize, acm->ctrl_buffer, acm->ctrl_dma);
+ acm_read_buffers_free(acm);
+
+ kfree(acm->notification_buffer);
+
+ if (!acm->combined_interfaces)
+ usb_driver_release_interface(&acm_driver, intf == acm->control ?
+ acm->data : acm->control);
+
+ tty_port_put(&acm->port);
+}
+
+#ifdef CONFIG_PM
+static int acm_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct acm *acm = usb_get_intfdata(intf);
+ int cnt;
+
+ spin_lock_irq(&acm->write_lock);
+ if (PMSG_IS_AUTO(message)) {
+ if (acm->transmitting) {
+ spin_unlock_irq(&acm->write_lock);
+ return -EBUSY;
+ }
+ }
+ cnt = acm->susp_count++;
+ spin_unlock_irq(&acm->write_lock);
+
+ if (cnt)
+ return 0;
+
+ acm_poison_urbs(acm);
+ cancel_delayed_work_sync(&acm->dwork);
+ acm->urbs_in_error_delay = 0;
+
+ return 0;
+}
+
+static int acm_resume(struct usb_interface *intf)
+{
+ struct acm *acm = usb_get_intfdata(intf);
+ struct urb *urb;
+ int rv = 0;
+
+ spin_lock_irq(&acm->write_lock);
+
+ if (--acm->susp_count)
+ goto out;
+
+ acm_unpoison_urbs(acm);
+
+ if (tty_port_initialized(&acm->port)) {
+ rv = usb_submit_urb(acm->ctrlurb, GFP_ATOMIC);
+
+ for (;;) {
+ urb = usb_get_from_anchor(&acm->delayed);
+ if (!urb)
+ break;
+
+ acm_start_wb(acm, urb->context);
+ }
+
+ /*
+ * delayed error checking because we must
+ * do the write path at all cost
+ */
+ if (rv < 0)
+ goto out;
+
+ rv = acm_submit_read_urbs(acm, GFP_ATOMIC);
+ }
+out:
+ spin_unlock_irq(&acm->write_lock);
+
+ return rv;
+}
+
+static int acm_reset_resume(struct usb_interface *intf)
+{
+ struct acm *acm = usb_get_intfdata(intf);
+
+ if (tty_port_initialized(&acm->port))
+ tty_port_tty_hangup(&acm->port, false);
+
+ return acm_resume(intf);
+}
+
+#endif /* CONFIG_PM */
+
+static int acm_pre_reset(struct usb_interface *intf)
+{
+ struct acm *acm = usb_get_intfdata(intf);
+
+ clear_bit(EVENT_RX_STALL, &acm->flags);
+ acm->nb_index = 0; /* pending control transfers are lost */
+
+ return 0;
+}
+
+#define NOKIA_PCSUITE_ACM_INFO(x) \
+ USB_DEVICE_AND_INTERFACE_INFO(0x0421, x, \
+ USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, \
+ USB_CDC_ACM_PROTO_VENDOR)
+
+#define SAMSUNG_PCSUITE_ACM_INFO(x) \
+ USB_DEVICE_AND_INTERFACE_INFO(0x04e7, x, \
+ USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, \
+ USB_CDC_ACM_PROTO_VENDOR)
+
+/*
+ * USB driver structure.
+ */
+
+static const struct usb_device_id acm_ids[] = {
+ /* quirky and broken devices */
+ { USB_DEVICE(0x0424, 0x274e), /* Microchip Technology, Inc. (formerly SMSC) */
+ .driver_info = DISABLE_ECHO, }, /* DISABLE ECHO in termios flag */
+ { USB_DEVICE(0x076d, 0x0006), /* Denso Cradle CU-321 */
+ .driver_info = NO_UNION_NORMAL, },/* has no union descriptor */
+ { USB_DEVICE(0x17ef, 0x7000), /* Lenovo USB modem */
+ .driver_info = NO_UNION_NORMAL, },/* has no union descriptor */
+ { USB_DEVICE(0x0870, 0x0001), /* Metricom GS Modem */
+ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+ },
+ { USB_DEVICE(0x045b, 0x023c), /* Renesas USB Download mode */
+ .driver_info = DISABLE_ECHO, /* Don't echo banner */
+ },
+ { USB_DEVICE(0x045b, 0x0248), /* Renesas USB Download mode */
+ .driver_info = DISABLE_ECHO, /* Don't echo banner */
+ },
+ { USB_DEVICE(0x045b, 0x024D), /* Renesas USB Download mode */
+ .driver_info = DISABLE_ECHO, /* Don't echo banner */
+ },
+ { USB_DEVICE(0x0e8d, 0x0003), /* FIREFLY, MediaTek Inc; andrey.arapov@gmail.com */
+ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+ },
+ { USB_DEVICE(0x0e8d, 0x2000), /* MediaTek Inc Preloader */
+ .driver_info = DISABLE_ECHO, /* DISABLE ECHO in termios flag */
+ },
+ { USB_DEVICE(0x0e8d, 0x3329), /* MediaTek Inc GPS */
+ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+ },
+ { USB_DEVICE(0x0482, 0x0203), /* KYOCERA AH-K3001V */
+ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+ },
+ { USB_DEVICE(0x079b, 0x000f), /* BT On-Air USB MODEM */
+ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+ },
+ { USB_DEVICE(0x0ace, 0x1602), /* ZyDAS 56K USB MODEM */
+ .driver_info = SINGLE_RX_URB,
+ },
+ { USB_DEVICE(0x0ace, 0x1608), /* ZyDAS 56K USB MODEM */
+ .driver_info = SINGLE_RX_URB, /* firmware bug */
+ },
+ { USB_DEVICE(0x0ace, 0x1611), /* ZyDAS 56K USB MODEM - new version */
+ .driver_info = SINGLE_RX_URB, /* firmware bug */
+ },
+ { USB_DEVICE(0x11ca, 0x0201), /* VeriFone Mx870 Gadget Serial */
+ .driver_info = SINGLE_RX_URB,
+ },
+ { USB_DEVICE(0x1965, 0x0018), /* Uniden UBC125XLT */
+ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+ },
+ { USB_DEVICE(0x22b8, 0x7000), /* Motorola Q Phone */
+ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+ },
+ { USB_DEVICE(0x0803, 0x3095), /* Zoom Telephonics Model 3095F USB MODEM */
+ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+ },
+ { USB_DEVICE(0x0572, 0x1321), /* Conexant USB MODEM CX93010 */
+ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+ },
+ { USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */
+ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+ },
+ { USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */
+ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+ },
+ { USB_DEVICE(0x0572, 0x1349), /* Hiro (Conexant) USB MODEM H50228 */
+ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+ },
+ { USB_DEVICE(0x20df, 0x0001), /* Simtec Electronics Entropy Key */
+ .driver_info = QUIRK_CONTROL_LINE_STATE, },
+ { USB_DEVICE(0x2184, 0x001c) }, /* GW Instek AFG-2225 */
+ { USB_DEVICE(0x2184, 0x0036) }, /* GW Instek AFG-125 */
+ { USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */
+ },
+ /* Motorola H24 HSPA module: */
+ { USB_DEVICE(0x22b8, 0x2d91) }, /* modem */
+ { USB_DEVICE(0x22b8, 0x2d92), /* modem + diagnostics */
+ .driver_info = NO_UNION_NORMAL, /* handle only modem interface */
+ },
+ { USB_DEVICE(0x22b8, 0x2d93), /* modem + AT port */
+ .driver_info = NO_UNION_NORMAL, /* handle only modem interface */
+ },
+ { USB_DEVICE(0x22b8, 0x2d95), /* modem + AT port + diagnostics */
+ .driver_info = NO_UNION_NORMAL, /* handle only modem interface */
+ },
+ { USB_DEVICE(0x22b8, 0x2d96), /* modem + NMEA */
+ .driver_info = NO_UNION_NORMAL, /* handle only modem interface */
+ },
+ { USB_DEVICE(0x22b8, 0x2d97), /* modem + diagnostics + NMEA */
+ .driver_info = NO_UNION_NORMAL, /* handle only modem interface */
+ },
+ { USB_DEVICE(0x22b8, 0x2d99), /* modem + AT port + NMEA */
+ .driver_info = NO_UNION_NORMAL, /* handle only modem interface */
+ },
+ { USB_DEVICE(0x22b8, 0x2d9a), /* modem + AT port + diagnostics + NMEA */
+ .driver_info = NO_UNION_NORMAL, /* handle only modem interface */
+ },
+
+ { USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */
+ .driver_info = NO_UNION_NORMAL, /* union descriptor misplaced on
+ data interface instead of
+ communications interface.
+ Maybe we should define a new
+ quirk for this. */
+ },
+ { USB_DEVICE(0x0572, 0x1340), /* Conexant CX93010-2x UCMxx */
+ .driver_info = NO_UNION_NORMAL,
+ },
+ { USB_DEVICE(0x05f9, 0x4002), /* PSC Scanning, Magellan 800i */
+ .driver_info = NO_UNION_NORMAL,
+ },
+ { USB_DEVICE(0x1bbb, 0x0003), /* Alcatel OT-I650 */
+ .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
+ },
+ { USB_DEVICE(0x1576, 0x03b1), /* Maretron USB100 */
+ .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
+ },
+ { USB_DEVICE(0xfff0, 0x0100), /* DATECS FP-2000 */
+ .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
+ },
+ { USB_DEVICE(0x09d8, 0x0320), /* Elatec GmbH TWN3 */
+ .driver_info = NO_UNION_NORMAL, /* has misplaced union descriptor */
+ },
+ { USB_DEVICE(0x0c26, 0x0020), /* Icom ICF3400 Serie */
+ .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
+ },
+ { USB_DEVICE(0x0ca6, 0xa050), /* Castles VEGA3000 */
+ .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
+ },
+
+ { USB_DEVICE(0x2912, 0x0001), /* ATOL FPrint */
+ .driver_info = CLEAR_HALT_CONDITIONS,
+ },
+
+ /* Nokia S60 phones expose two ACM channels. The first is
+ * a modem and is picked up by the standard AT-command
+ * information below. The second is 'vendor-specific' but
+ * is treated as a serial device at the S60 end, so we want
+ * to expose it on Linux too. */
+ { NOKIA_PCSUITE_ACM_INFO(0x042D), }, /* Nokia 3250 */
+ { NOKIA_PCSUITE_ACM_INFO(0x04D8), }, /* Nokia 5500 Sport */
+ { NOKIA_PCSUITE_ACM_INFO(0x04C9), }, /* Nokia E50 */
+ { NOKIA_PCSUITE_ACM_INFO(0x0419), }, /* Nokia E60 */
+ { NOKIA_PCSUITE_ACM_INFO(0x044D), }, /* Nokia E61 */
+ { NOKIA_PCSUITE_ACM_INFO(0x0001), }, /* Nokia E61i */
+ { NOKIA_PCSUITE_ACM_INFO(0x0475), }, /* Nokia E62 */
+ { NOKIA_PCSUITE_ACM_INFO(0x0508), }, /* Nokia E65 */
+ { NOKIA_PCSUITE_ACM_INFO(0x0418), }, /* Nokia E70 */
+ { NOKIA_PCSUITE_ACM_INFO(0x0425), }, /* Nokia N71 */
+ { NOKIA_PCSUITE_ACM_INFO(0x0486), }, /* Nokia N73 */
+ { NOKIA_PCSUITE_ACM_INFO(0x04DF), }, /* Nokia N75 */
+ { NOKIA_PCSUITE_ACM_INFO(0x000e), }, /* Nokia N77 */
+ { NOKIA_PCSUITE_ACM_INFO(0x0445), }, /* Nokia N80 */
+ { NOKIA_PCSUITE_ACM_INFO(0x042F), }, /* Nokia N91 & N91 8GB */
+ { NOKIA_PCSUITE_ACM_INFO(0x048E), }, /* Nokia N92 */
+ { NOKIA_PCSUITE_ACM_INFO(0x0420), }, /* Nokia N93 */
+ { NOKIA_PCSUITE_ACM_INFO(0x04E6), }, /* Nokia N93i */
+ { NOKIA_PCSUITE_ACM_INFO(0x04B2), }, /* Nokia 5700 XpressMusic */
+ { NOKIA_PCSUITE_ACM_INFO(0x0134), }, /* Nokia 6110 Navigator (China) */
+ { NOKIA_PCSUITE_ACM_INFO(0x046E), }, /* Nokia 6110 Navigator */
+ { NOKIA_PCSUITE_ACM_INFO(0x002f), }, /* Nokia 6120 classic & */
+ { NOKIA_PCSUITE_ACM_INFO(0x0088), }, /* Nokia 6121 classic */
+ { NOKIA_PCSUITE_ACM_INFO(0x00fc), }, /* Nokia 6124 classic */
+ { NOKIA_PCSUITE_ACM_INFO(0x0042), }, /* Nokia E51 */
+ { NOKIA_PCSUITE_ACM_INFO(0x00b0), }, /* Nokia E66 */
+ { NOKIA_PCSUITE_ACM_INFO(0x00ab), }, /* Nokia E71 */
+ { NOKIA_PCSUITE_ACM_INFO(0x0481), }, /* Nokia N76 */
+ { NOKIA_PCSUITE_ACM_INFO(0x0007), }, /* Nokia N81 & N81 8GB */
+ { NOKIA_PCSUITE_ACM_INFO(0x0071), }, /* Nokia N82 */
+ { NOKIA_PCSUITE_ACM_INFO(0x04F0), }, /* Nokia N95 & N95-3 NAM */
+ { NOKIA_PCSUITE_ACM_INFO(0x0070), }, /* Nokia N95 8GB */
+ { NOKIA_PCSUITE_ACM_INFO(0x0099), }, /* Nokia 6210 Navigator, RM-367 */
+ { NOKIA_PCSUITE_ACM_INFO(0x0128), }, /* Nokia 6210 Navigator, RM-419 */
+ { NOKIA_PCSUITE_ACM_INFO(0x008f), }, /* Nokia 6220 Classic */
+ { NOKIA_PCSUITE_ACM_INFO(0x00a0), }, /* Nokia 6650 */
+ { NOKIA_PCSUITE_ACM_INFO(0x007b), }, /* Nokia N78 */
+ { NOKIA_PCSUITE_ACM_INFO(0x0094), }, /* Nokia N85 */
+ { NOKIA_PCSUITE_ACM_INFO(0x003a), }, /* Nokia N96 & N96-3 */
+ { NOKIA_PCSUITE_ACM_INFO(0x00e9), }, /* Nokia 5320 XpressMusic */
+ { NOKIA_PCSUITE_ACM_INFO(0x0108), }, /* Nokia 5320 XpressMusic 2G */
+ { NOKIA_PCSUITE_ACM_INFO(0x01f5), }, /* Nokia N97, RM-505 */
+ { NOKIA_PCSUITE_ACM_INFO(0x02e3), }, /* Nokia 5230, RM-588 */
+ { NOKIA_PCSUITE_ACM_INFO(0x0178), }, /* Nokia E63 */
+ { NOKIA_PCSUITE_ACM_INFO(0x010e), }, /* Nokia E75 */
+ { NOKIA_PCSUITE_ACM_INFO(0x02d9), }, /* Nokia 6760 Slide */
+ { NOKIA_PCSUITE_ACM_INFO(0x01d0), }, /* Nokia E52 */
+ { NOKIA_PCSUITE_ACM_INFO(0x0223), }, /* Nokia E72 */
+ { NOKIA_PCSUITE_ACM_INFO(0x0275), }, /* Nokia X6 */
+ { NOKIA_PCSUITE_ACM_INFO(0x026c), }, /* Nokia N97 Mini */
+ { NOKIA_PCSUITE_ACM_INFO(0x0154), }, /* Nokia 5800 XpressMusic */
+ { NOKIA_PCSUITE_ACM_INFO(0x04ce), }, /* Nokia E90 */
+ { NOKIA_PCSUITE_ACM_INFO(0x01d4), }, /* Nokia E55 */
+ { NOKIA_PCSUITE_ACM_INFO(0x0302), }, /* Nokia N8 */
+ { NOKIA_PCSUITE_ACM_INFO(0x0335), }, /* Nokia E7 */
+ { NOKIA_PCSUITE_ACM_INFO(0x03cd), }, /* Nokia C7 */
+ { SAMSUNG_PCSUITE_ACM_INFO(0x6651), }, /* Samsung GTi8510 (INNOV8) */
+
+ /* Support for Owen devices */
+ { USB_DEVICE(0x03eb, 0x0030), }, /* Owen SI30 */
+
+ /* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
+
+#if IS_ENABLED(CONFIG_INPUT_IMS_PCU)
+ { USB_DEVICE(0x04d8, 0x0082), /* Application mode */
+ .driver_info = IGNORE_DEVICE,
+ },
+ { USB_DEVICE(0x04d8, 0x0083), /* Bootloader mode */
+ .driver_info = IGNORE_DEVICE,
+ },
+#endif
+
+#if IS_ENABLED(CONFIG_IR_TOY)
+ { USB_DEVICE(0x04d8, 0xfd08),
+ .driver_info = IGNORE_DEVICE,
+ },
+
+ { USB_DEVICE(0x04d8, 0xf58b),
+ .driver_info = IGNORE_DEVICE,
+ },
+#endif
+
+#if IS_ENABLED(CONFIG_USB_SERIAL_XR)
+ { USB_DEVICE(0x04e2, 0x1400), .driver_info = IGNORE_DEVICE },
+ { USB_DEVICE(0x04e2, 0x1401), .driver_info = IGNORE_DEVICE },
+ { USB_DEVICE(0x04e2, 0x1402), .driver_info = IGNORE_DEVICE },
+ { USB_DEVICE(0x04e2, 0x1403), .driver_info = IGNORE_DEVICE },
+ { USB_DEVICE(0x04e2, 0x1410), .driver_info = IGNORE_DEVICE },
+ { USB_DEVICE(0x04e2, 0x1411), .driver_info = IGNORE_DEVICE },
+ { USB_DEVICE(0x04e2, 0x1412), .driver_info = IGNORE_DEVICE },
+ { USB_DEVICE(0x04e2, 0x1414), .driver_info = IGNORE_DEVICE },
+ { USB_DEVICE(0x04e2, 0x1420), .driver_info = IGNORE_DEVICE },
+ { USB_DEVICE(0x04e2, 0x1422), .driver_info = IGNORE_DEVICE },
+ { USB_DEVICE(0x04e2, 0x1424), .driver_info = IGNORE_DEVICE },
+#endif
+
+ /*Samsung phone in firmware update mode */
+ { USB_DEVICE(0x04e8, 0x685d),
+ .driver_info = IGNORE_DEVICE,
+ },
+
+ /* Exclude Infineon Flash Loader utility */
+ { USB_DEVICE(0x058b, 0x0041),
+ .driver_info = IGNORE_DEVICE,
+ },
+
+ /* Exclude ETAS ES58x */
+ { USB_DEVICE(0x108c, 0x0159), /* ES581.4 */
+ .driver_info = IGNORE_DEVICE,
+ },
+ { USB_DEVICE(0x108c, 0x0168), /* ES582.1 */
+ .driver_info = IGNORE_DEVICE,
+ },
+ { USB_DEVICE(0x108c, 0x0169), /* ES584.1 */
+ .driver_info = IGNORE_DEVICE,
+ },
+
+ { USB_DEVICE(0x1bc7, 0x0021), /* Telit 3G ACM only composition */
+ .driver_info = SEND_ZERO_PACKET,
+ },
+ { USB_DEVICE(0x1bc7, 0x0023), /* Telit 3G ACM + ECM composition */
+ .driver_info = SEND_ZERO_PACKET,
+ },
+
+ /* Exclude Goodix Fingerprint Reader */
+ { USB_DEVICE(0x27c6, 0x5395),
+ .driver_info = IGNORE_DEVICE,
+ },
+
+ /* Exclude Heimann Sensor GmbH USB appset demo */
+ { USB_DEVICE(0x32a7, 0x0000),
+ .driver_info = IGNORE_DEVICE,
+ },
+
+ /* control interfaces without any protocol set */
+ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
+ USB_CDC_PROTO_NONE) },
+
+ /* control interfaces with various AT-command sets */
+ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
+ USB_CDC_ACM_PROTO_AT_V25TER) },
+ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
+ USB_CDC_ACM_PROTO_AT_PCCA101) },
+ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
+ USB_CDC_ACM_PROTO_AT_PCCA101_WAKE) },
+ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
+ USB_CDC_ACM_PROTO_AT_GSM) },
+ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
+ USB_CDC_ACM_PROTO_AT_3G) },
+ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
+ USB_CDC_ACM_PROTO_AT_CDMA) },
+
+ { USB_DEVICE(0x1519, 0x0452), /* Intel 7260 modem */
+ .driver_info = SEND_ZERO_PACKET,
+ },
+
+ { }
+};
+
+MODULE_DEVICE_TABLE(usb, acm_ids);
+
+static struct usb_driver acm_driver = {
+ .name = "cdc_acm",
+ .probe = acm_probe,
+ .disconnect = acm_disconnect,
+#ifdef CONFIG_PM
+ .suspend = acm_suspend,
+ .resume = acm_resume,
+ .reset_resume = acm_reset_resume,
+#endif
+ .pre_reset = acm_pre_reset,
+ .id_table = acm_ids,
+#ifdef CONFIG_PM
+ .supports_autosuspend = 1,
+#endif
+ .disable_hub_initiated_lpm = 1,
+};
+
+/*
+ * TTY driver structures.
+ */
+
+static const struct tty_operations acm_ops = {
+ .install = acm_tty_install,
+ .open = acm_tty_open,
+ .close = acm_tty_close,
+ .cleanup = acm_tty_cleanup,
+ .hangup = acm_tty_hangup,
+ .write = acm_tty_write,
+ .write_room = acm_tty_write_room,
+ .ioctl = acm_tty_ioctl,
+ .throttle = acm_tty_throttle,
+ .unthrottle = acm_tty_unthrottle,
+ .chars_in_buffer = acm_tty_chars_in_buffer,
+ .break_ctl = acm_tty_break_ctl,
+ .set_termios = acm_tty_set_termios,
+ .tiocmget = acm_tty_tiocmget,
+ .tiocmset = acm_tty_tiocmset,
+ .get_serial = get_serial_info,
+ .set_serial = set_serial_info,
+ .get_icount = acm_tty_get_icount,
+};
+
+/*
+ * Init / exit.
+ */
+
+static int __init acm_init(void)
+{
+ int retval;
+ acm_tty_driver = tty_alloc_driver(ACM_TTY_MINORS, TTY_DRIVER_REAL_RAW |
+ TTY_DRIVER_DYNAMIC_DEV);
+ if (IS_ERR(acm_tty_driver))
+ return PTR_ERR(acm_tty_driver);
+ acm_tty_driver->driver_name = "acm",
+ acm_tty_driver->name = "ttyACM",
+ acm_tty_driver->major = ACM_TTY_MAJOR,
+ acm_tty_driver->minor_start = 0,
+ acm_tty_driver->type = TTY_DRIVER_TYPE_SERIAL,
+ acm_tty_driver->subtype = SERIAL_TYPE_NORMAL,
+ acm_tty_driver->init_termios = tty_std_termios;
+ acm_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD |
+ HUPCL | CLOCAL;
+ tty_set_operations(acm_tty_driver, &acm_ops);
+
+ retval = tty_register_driver(acm_tty_driver);
+ if (retval) {
+ tty_driver_kref_put(acm_tty_driver);
+ return retval;
+ }
+
+ retval = usb_register(&acm_driver);
+ if (retval) {
+ tty_unregister_driver(acm_tty_driver);
+ tty_driver_kref_put(acm_tty_driver);
+ return retval;
+ }
+
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
+
+ return 0;
+}
+
+static void __exit acm_exit(void)
+{
+ usb_deregister(&acm_driver);
+ tty_unregister_driver(acm_tty_driver);
+ tty_driver_kref_put(acm_tty_driver);
+ idr_destroy(&acm_minors);
+}
+
+module_init(acm_init);
+module_exit(acm_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_CHARDEV_MAJOR(ACM_TTY_MAJOR);
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
new file mode 100644
index 000000000..759ac1563
--- /dev/null
+++ b/drivers/usb/class/cdc-acm.h
@@ -0,0 +1,115 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *
+ * Includes for cdc-acm.c
+ *
+ * Mainly take from usbnet's cdc-ether part
+ *
+ */
+
+/*
+ * Major and minor numbers.
+ */
+
+#define ACM_TTY_MAJOR 166
+#define ACM_TTY_MINORS 256
+
+#define ACM_MINOR_INVALID ACM_TTY_MINORS
+
+/*
+ * Requests.
+ */
+
+#define USB_RT_ACM (USB_TYPE_CLASS | USB_RECIP_INTERFACE)
+
+/*
+ * Internal driver structures.
+ */
+
+/*
+ * The only reason to have several buffers is to accommodate assumptions
+ * in line disciplines. They ask for empty space amount, receive our URB size,
+ * and proceed to issue several 1-character writes, assuming they will fit.
+ * The very first write takes a complete URB. Fortunately, this only happens
+ * when processing onlcr, so we only need 2 buffers. These values must be
+ * powers of 2.
+ */
+#define ACM_NW 16
+#define ACM_NR 16
+
+struct acm_wb {
+ u8 *buf;
+ dma_addr_t dmah;
+ unsigned int len;
+ struct urb *urb;
+ struct acm *instance;
+ bool use;
+};
+
+struct acm_rb {
+ int size;
+ unsigned char *base;
+ dma_addr_t dma;
+ int index;
+ struct acm *instance;
+};
+
+struct acm {
+ struct usb_device *dev; /* the corresponding usb device */
+ struct usb_interface *control; /* control interface */
+ struct usb_interface *data; /* data interface */
+ unsigned in, out; /* i/o pipes */
+ struct tty_port port; /* our tty port data */
+ struct urb *ctrlurb; /* urbs */
+ u8 *ctrl_buffer; /* buffers of urbs */
+ dma_addr_t ctrl_dma; /* dma handles of buffers */
+ u8 *country_codes; /* country codes from device */
+ unsigned int country_code_size; /* size of this buffer */
+ unsigned int country_rel_date; /* release date of version */
+ struct acm_wb wb[ACM_NW];
+ unsigned long read_urbs_free;
+ struct urb *read_urbs[ACM_NR];
+ struct acm_rb read_buffers[ACM_NR];
+ int rx_buflimit;
+ spinlock_t read_lock;
+ u8 *notification_buffer; /* to reassemble fragmented notifications */
+ unsigned int nb_index;
+ unsigned int nb_size;
+ int transmitting;
+ spinlock_t write_lock;
+ struct mutex mutex;
+ bool disconnected;
+ unsigned long flags;
+# define EVENT_TTY_WAKEUP 0
+# define EVENT_RX_STALL 1
+# define ACM_THROTTLED 2
+# define ACM_ERROR_DELAY 3
+ unsigned long urbs_in_error_delay; /* these need to be restarted after a delay */
+ struct usb_cdc_line_coding line; /* bits, stop, parity */
+ struct delayed_work dwork; /* work queue entry for various purposes */
+ unsigned int ctrlin; /* input control lines (DCD, DSR, RI, break, overruns) */
+ unsigned int ctrlout; /* output control lines (DTR, RTS) */
+ struct async_icount iocount; /* counters for control line changes */
+ struct async_icount oldcount; /* for comparison of counter */
+ wait_queue_head_t wioctl; /* for ioctl */
+ unsigned int writesize; /* max packet size for the output bulk endpoint */
+ unsigned int readsize,ctrlsize; /* buffer sizes for freeing */
+ unsigned int minor; /* acm minor number */
+ unsigned char clocal; /* termios CLOCAL */
+ unsigned int ctrl_caps; /* control capabilities from the class specific header */
+ unsigned int susp_count; /* number of suspended interfaces */
+ unsigned int combined_interfaces:1; /* control and data collapsed */
+ u8 bInterval;
+ struct usb_anchor delayed; /* writes queued for a device about to be woken */
+ unsigned long quirks;
+};
+
+/* constants describing various quirks and errors */
+#define NO_UNION_NORMAL BIT(0)
+#define SINGLE_RX_URB BIT(1)
+#define NO_CAP_LINE BIT(2)
+#define IGNORE_DEVICE BIT(3)
+#define QUIRK_CONTROL_LINE_STATE BIT(4)
+#define CLEAR_HALT_CONDITIONS BIT(5)
+#define SEND_ZERO_PACKET BIT(6)
+#define DISABLE_ECHO BIT(7)
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
new file mode 100644
index 000000000..1f0951be1
--- /dev/null
+++ b/drivers/usb/class/cdc-wdm.c
@@ -0,0 +1,1371 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * cdc-wdm.c
+ *
+ * This driver supports USB CDC WCM Device Management.
+ *
+ * Copyright (c) 2007-2009 Oliver Neukum
+ *
+ * Some code taken from cdc-acm.c
+ *
+ * Released under the GPLv2.
+ *
+ * Many thanks to Carl Nordbeck
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/ioctl.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+#include <linux/bitops.h>
+#include <linux/poll.h>
+#include <linux/skbuff.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/wwan.h>
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+#include <linux/usb/cdc-wdm.h>
+
+#define DRIVER_AUTHOR "Oliver Neukum"
+#define DRIVER_DESC "USB Abstract Control Model driver for USB WCM Device Management"
+
+static const struct usb_device_id wdm_ids[] = {
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+ .bInterfaceClass = USB_CLASS_COMM,
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_DMM
+ },
+ { }
+};
+
+MODULE_DEVICE_TABLE (usb, wdm_ids);
+
+#define WDM_MINOR_BASE 176
+
+
+#define WDM_IN_USE 1
+#define WDM_DISCONNECTING 2
+#define WDM_RESULT 3
+#define WDM_READ 4
+#define WDM_INT_STALL 5
+#define WDM_POLL_RUNNING 6
+#define WDM_RESPONDING 7
+#define WDM_SUSPENDING 8
+#define WDM_RESETTING 9
+#define WDM_OVERFLOW 10
+#define WDM_WWAN_IN_USE 11
+
+#define WDM_MAX 16
+
+/* we cannot wait forever at flush() */
+#define WDM_FLUSH_TIMEOUT (30 * HZ)
+
+/* CDC-WMC r1.1 requires wMaxCommand to be "at least 256 decimal (0x100)" */
+#define WDM_DEFAULT_BUFSIZE 256
+
+static DEFINE_MUTEX(wdm_mutex);
+static DEFINE_SPINLOCK(wdm_device_list_lock);
+static LIST_HEAD(wdm_device_list);
+
+/* --- method tables --- */
+
+struct wdm_device {
+ u8 *inbuf; /* buffer for response */
+ u8 *outbuf; /* buffer for command */
+ u8 *sbuf; /* buffer for status */
+ u8 *ubuf; /* buffer for copy to user space */
+
+ struct urb *command;
+ struct urb *response;
+ struct urb *validity;
+ struct usb_interface *intf;
+ struct usb_ctrlrequest *orq;
+ struct usb_ctrlrequest *irq;
+ spinlock_t iuspin;
+
+ unsigned long flags;
+ u16 bufsize;
+ u16 wMaxCommand;
+ u16 wMaxPacketSize;
+ __le16 inum;
+ int reslength;
+ int length;
+ int read;
+ int count;
+ dma_addr_t shandle;
+ dma_addr_t ihandle;
+ struct mutex wlock;
+ struct mutex rlock;
+ wait_queue_head_t wait;
+ struct work_struct rxwork;
+ struct work_struct service_outs_intr;
+ int werr;
+ int rerr;
+ int resp_count;
+
+ struct list_head device_list;
+ int (*manage_power)(struct usb_interface *, int);
+
+ enum wwan_port_type wwanp_type;
+ struct wwan_port *wwanp;
+};
+
+static struct usb_driver wdm_driver;
+
+/* return intfdata if we own the interface, else look up intf in the list */
+static struct wdm_device *wdm_find_device(struct usb_interface *intf)
+{
+ struct wdm_device *desc;
+
+ spin_lock(&wdm_device_list_lock);
+ list_for_each_entry(desc, &wdm_device_list, device_list)
+ if (desc->intf == intf)
+ goto found;
+ desc = NULL;
+found:
+ spin_unlock(&wdm_device_list_lock);
+
+ return desc;
+}
+
+static struct wdm_device *wdm_find_device_by_minor(int minor)
+{
+ struct wdm_device *desc;
+
+ spin_lock(&wdm_device_list_lock);
+ list_for_each_entry(desc, &wdm_device_list, device_list)
+ if (desc->intf->minor == minor)
+ goto found;
+ desc = NULL;
+found:
+ spin_unlock(&wdm_device_list_lock);
+
+ return desc;
+}
+
+/* --- callbacks --- */
+static void wdm_out_callback(struct urb *urb)
+{
+ struct wdm_device *desc;
+ unsigned long flags;
+
+ desc = urb->context;
+ spin_lock_irqsave(&desc->iuspin, flags);
+ desc->werr = urb->status;
+ spin_unlock_irqrestore(&desc->iuspin, flags);
+ kfree(desc->outbuf);
+ desc->outbuf = NULL;
+ clear_bit(WDM_IN_USE, &desc->flags);
+ wake_up_all(&desc->wait);
+}
+
+static void wdm_wwan_rx(struct wdm_device *desc, int length);
+
+static void wdm_in_callback(struct urb *urb)
+{
+ unsigned long flags;
+ struct wdm_device *desc = urb->context;
+ int status = urb->status;
+ int length = urb->actual_length;
+
+ spin_lock_irqsave(&desc->iuspin, flags);
+ clear_bit(WDM_RESPONDING, &desc->flags);
+
+ if (status) {
+ switch (status) {
+ case -ENOENT:
+ dev_dbg(&desc->intf->dev,
+ "nonzero urb status received: -ENOENT\n");
+ goto skip_error;
+ case -ECONNRESET:
+ dev_dbg(&desc->intf->dev,
+ "nonzero urb status received: -ECONNRESET\n");
+ goto skip_error;
+ case -ESHUTDOWN:
+ dev_dbg(&desc->intf->dev,
+ "nonzero urb status received: -ESHUTDOWN\n");
+ goto skip_error;
+ case -EPIPE:
+ dev_err(&desc->intf->dev,
+ "nonzero urb status received: -EPIPE\n");
+ break;
+ default:
+ dev_err(&desc->intf->dev,
+ "Unexpected error %d\n", status);
+ break;
+ }
+ }
+
+ if (test_bit(WDM_WWAN_IN_USE, &desc->flags)) {
+ wdm_wwan_rx(desc, length);
+ goto out;
+ }
+
+ /*
+ * only set a new error if there is no previous error.
+ * Errors are only cleared during read/open
+ * Avoid propagating -EPIPE (stall) to userspace since it is
+ * better handled as an empty read
+ */
+ if (desc->rerr == 0 && status != -EPIPE)
+ desc->rerr = status;
+
+ if (length + desc->length > desc->wMaxCommand) {
+ /* The buffer would overflow */
+ set_bit(WDM_OVERFLOW, &desc->flags);
+ } else {
+ /* we may already be in overflow */
+ if (!test_bit(WDM_OVERFLOW, &desc->flags)) {
+ memmove(desc->ubuf + desc->length, desc->inbuf, length);
+ desc->length += length;
+ desc->reslength = length;
+ }
+ }
+skip_error:
+
+ if (desc->rerr) {
+ /*
+ * Since there was an error, userspace may decide to not read
+ * any data after poll'ing.
+ * We should respond to further attempts from the device to send
+ * data, so that we can get unstuck.
+ */
+ schedule_work(&desc->service_outs_intr);
+ } else {
+ set_bit(WDM_READ, &desc->flags);
+ wake_up(&desc->wait);
+ }
+out:
+ spin_unlock_irqrestore(&desc->iuspin, flags);
+}
+
+static void wdm_int_callback(struct urb *urb)
+{
+ unsigned long flags;
+ int rv = 0;
+ int responding;
+ int status = urb->status;
+ struct wdm_device *desc;
+ struct usb_cdc_notification *dr;
+
+ desc = urb->context;
+ dr = (struct usb_cdc_notification *)desc->sbuf;
+
+ if (status) {
+ switch (status) {
+ case -ESHUTDOWN:
+ case -ENOENT:
+ case -ECONNRESET:
+ return; /* unplug */
+ case -EPIPE:
+ set_bit(WDM_INT_STALL, &desc->flags);
+ dev_err(&desc->intf->dev, "Stall on int endpoint\n");
+ goto sw; /* halt is cleared in work */
+ default:
+ dev_err(&desc->intf->dev,
+ "nonzero urb status received: %d\n", status);
+ break;
+ }
+ }
+
+ if (urb->actual_length < sizeof(struct usb_cdc_notification)) {
+ dev_err(&desc->intf->dev, "wdm_int_callback - %d bytes\n",
+ urb->actual_length);
+ goto exit;
+ }
+
+ switch (dr->bNotificationType) {
+ case USB_CDC_NOTIFY_RESPONSE_AVAILABLE:
+ dev_dbg(&desc->intf->dev,
+ "NOTIFY_RESPONSE_AVAILABLE received: index %d len %d\n",
+ le16_to_cpu(dr->wIndex), le16_to_cpu(dr->wLength));
+ break;
+
+ case USB_CDC_NOTIFY_NETWORK_CONNECTION:
+
+ dev_dbg(&desc->intf->dev,
+ "NOTIFY_NETWORK_CONNECTION %s network\n",
+ dr->wValue ? "connected to" : "disconnected from");
+ goto exit;
+ case USB_CDC_NOTIFY_SPEED_CHANGE:
+ dev_dbg(&desc->intf->dev, "SPEED_CHANGE received (len %u)\n",
+ urb->actual_length);
+ goto exit;
+ default:
+ clear_bit(WDM_POLL_RUNNING, &desc->flags);
+ dev_err(&desc->intf->dev,
+ "unknown notification %d received: index %d len %d\n",
+ dr->bNotificationType,
+ le16_to_cpu(dr->wIndex),
+ le16_to_cpu(dr->wLength));
+ goto exit;
+ }
+
+ spin_lock_irqsave(&desc->iuspin, flags);
+ responding = test_and_set_bit(WDM_RESPONDING, &desc->flags);
+ if (!desc->resp_count++ && !responding
+ && !test_bit(WDM_DISCONNECTING, &desc->flags)
+ && !test_bit(WDM_SUSPENDING, &desc->flags)) {
+ rv = usb_submit_urb(desc->response, GFP_ATOMIC);
+ dev_dbg(&desc->intf->dev, "submit response URB %d\n", rv);
+ }
+ spin_unlock_irqrestore(&desc->iuspin, flags);
+ if (rv < 0) {
+ clear_bit(WDM_RESPONDING, &desc->flags);
+ if (rv == -EPERM)
+ return;
+ if (rv == -ENOMEM) {
+sw:
+ rv = schedule_work(&desc->rxwork);
+ if (rv)
+ dev_err(&desc->intf->dev,
+ "Cannot schedule work\n");
+ }
+ }
+exit:
+ rv = usb_submit_urb(urb, GFP_ATOMIC);
+ if (rv)
+ dev_err(&desc->intf->dev,
+ "%s - usb_submit_urb failed with result %d\n",
+ __func__, rv);
+
+}
+
+static void poison_urbs(struct wdm_device *desc)
+{
+ /* the order here is essential */
+ usb_poison_urb(desc->command);
+ usb_poison_urb(desc->validity);
+ usb_poison_urb(desc->response);
+}
+
+static void unpoison_urbs(struct wdm_device *desc)
+{
+ /*
+ * the order here is not essential
+ * it is symmetrical just to be nice
+ */
+ usb_unpoison_urb(desc->response);
+ usb_unpoison_urb(desc->validity);
+ usb_unpoison_urb(desc->command);
+}
+
+static void free_urbs(struct wdm_device *desc)
+{
+ usb_free_urb(desc->validity);
+ usb_free_urb(desc->response);
+ usb_free_urb(desc->command);
+}
+
+static void cleanup(struct wdm_device *desc)
+{
+ kfree(desc->sbuf);
+ kfree(desc->inbuf);
+ kfree(desc->orq);
+ kfree(desc->irq);
+ kfree(desc->ubuf);
+ free_urbs(desc);
+ kfree(desc);
+}
+
+static ssize_t wdm_write
+(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
+{
+ u8 *buf;
+ int rv = -EMSGSIZE, r, we;
+ struct wdm_device *desc = file->private_data;
+ struct usb_ctrlrequest *req;
+
+ if (count > desc->wMaxCommand)
+ count = desc->wMaxCommand;
+
+ spin_lock_irq(&desc->iuspin);
+ we = desc->werr;
+ desc->werr = 0;
+ spin_unlock_irq(&desc->iuspin);
+ if (we < 0)
+ return usb_translate_errors(we);
+
+ buf = memdup_user(buffer, count);
+ if (IS_ERR(buf))
+ return PTR_ERR(buf);
+
+ /* concurrent writes and disconnect */
+ r = mutex_lock_interruptible(&desc->wlock);
+ rv = -ERESTARTSYS;
+ if (r)
+ goto out_free_mem;
+
+ if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+ rv = -ENODEV;
+ goto out_free_mem_lock;
+ }
+
+ r = usb_autopm_get_interface(desc->intf);
+ if (r < 0) {
+ rv = usb_translate_errors(r);
+ goto out_free_mem_lock;
+ }
+
+ if (!(file->f_flags & O_NONBLOCK))
+ r = wait_event_interruptible(desc->wait, !test_bit(WDM_IN_USE,
+ &desc->flags));
+ else
+ if (test_bit(WDM_IN_USE, &desc->flags))
+ r = -EAGAIN;
+
+ if (test_bit(WDM_RESETTING, &desc->flags))
+ r = -EIO;
+
+ if (test_bit(WDM_DISCONNECTING, &desc->flags))
+ r = -ENODEV;
+
+ if (r < 0) {
+ rv = r;
+ goto out_free_mem_pm;
+ }
+
+ req = desc->orq;
+ usb_fill_control_urb(
+ desc->command,
+ interface_to_usbdev(desc->intf),
+ /* using common endpoint 0 */
+ usb_sndctrlpipe(interface_to_usbdev(desc->intf), 0),
+ (unsigned char *)req,
+ buf,
+ count,
+ wdm_out_callback,
+ desc
+ );
+
+ req->bRequestType = (USB_DIR_OUT | USB_TYPE_CLASS |
+ USB_RECIP_INTERFACE);
+ req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND;
+ req->wValue = 0;
+ req->wIndex = desc->inum; /* already converted */
+ req->wLength = cpu_to_le16(count);
+ set_bit(WDM_IN_USE, &desc->flags);
+ desc->outbuf = buf;
+
+ rv = usb_submit_urb(desc->command, GFP_KERNEL);
+ if (rv < 0) {
+ desc->outbuf = NULL;
+ clear_bit(WDM_IN_USE, &desc->flags);
+ wake_up_all(&desc->wait); /* for wdm_wait_for_response() */
+ dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv);
+ rv = usb_translate_errors(rv);
+ goto out_free_mem_pm;
+ } else {
+ dev_dbg(&desc->intf->dev, "Tx URB has been submitted index=%d\n",
+ le16_to_cpu(req->wIndex));
+ }
+
+ usb_autopm_put_interface(desc->intf);
+ mutex_unlock(&desc->wlock);
+ return count;
+
+out_free_mem_pm:
+ usb_autopm_put_interface(desc->intf);
+out_free_mem_lock:
+ mutex_unlock(&desc->wlock);
+out_free_mem:
+ kfree(buf);
+ return rv;
+}
+
+/*
+ * Submit the read urb if resp_count is non-zero.
+ *
+ * Called with desc->iuspin locked
+ */
+static int service_outstanding_interrupt(struct wdm_device *desc)
+{
+ int rv = 0;
+
+ /* submit read urb only if the device is waiting for it */
+ if (!desc->resp_count || !--desc->resp_count)
+ goto out;
+
+ if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+ rv = -ENODEV;
+ goto out;
+ }
+ if (test_bit(WDM_RESETTING, &desc->flags)) {
+ rv = -EIO;
+ goto out;
+ }
+
+ set_bit(WDM_RESPONDING, &desc->flags);
+ spin_unlock_irq(&desc->iuspin);
+ rv = usb_submit_urb(desc->response, GFP_KERNEL);
+ spin_lock_irq(&desc->iuspin);
+ if (rv) {
+ if (!test_bit(WDM_DISCONNECTING, &desc->flags))
+ dev_err(&desc->intf->dev,
+ "usb_submit_urb failed with result %d\n", rv);
+
+ /* make sure the next notification trigger a submit */
+ clear_bit(WDM_RESPONDING, &desc->flags);
+ desc->resp_count = 0;
+ }
+out:
+ return rv;
+}
+
+static ssize_t wdm_read
+(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
+{
+ int rv, cntr;
+ int i = 0;
+ struct wdm_device *desc = file->private_data;
+
+
+ rv = mutex_lock_interruptible(&desc->rlock); /*concurrent reads */
+ if (rv < 0)
+ return -ERESTARTSYS;
+
+ cntr = READ_ONCE(desc->length);
+ if (cntr == 0) {
+ desc->read = 0;
+retry:
+ if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+ rv = -ENODEV;
+ goto err;
+ }
+ if (test_bit(WDM_OVERFLOW, &desc->flags)) {
+ clear_bit(WDM_OVERFLOW, &desc->flags);
+ rv = -ENOBUFS;
+ goto err;
+ }
+ i++;
+ if (file->f_flags & O_NONBLOCK) {
+ if (!test_bit(WDM_READ, &desc->flags)) {
+ rv = -EAGAIN;
+ goto err;
+ }
+ rv = 0;
+ } else {
+ rv = wait_event_interruptible(desc->wait,
+ test_bit(WDM_READ, &desc->flags));
+ }
+
+ /* may have happened while we slept */
+ if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+ rv = -ENODEV;
+ goto err;
+ }
+ if (test_bit(WDM_RESETTING, &desc->flags)) {
+ rv = -EIO;
+ goto err;
+ }
+ usb_mark_last_busy(interface_to_usbdev(desc->intf));
+ if (rv < 0) {
+ rv = -ERESTARTSYS;
+ goto err;
+ }
+
+ spin_lock_irq(&desc->iuspin);
+
+ if (desc->rerr) { /* read completed, error happened */
+ rv = usb_translate_errors(desc->rerr);
+ desc->rerr = 0;
+ spin_unlock_irq(&desc->iuspin);
+ goto err;
+ }
+ /*
+ * recheck whether we've lost the race
+ * against the completion handler
+ */
+ if (!test_bit(WDM_READ, &desc->flags)) { /* lost race */
+ spin_unlock_irq(&desc->iuspin);
+ goto retry;
+ }
+
+ if (!desc->reslength) { /* zero length read */
+ dev_dbg(&desc->intf->dev, "zero length - clearing WDM_READ\n");
+ clear_bit(WDM_READ, &desc->flags);
+ rv = service_outstanding_interrupt(desc);
+ spin_unlock_irq(&desc->iuspin);
+ if (rv < 0)
+ goto err;
+ goto retry;
+ }
+ cntr = desc->length;
+ spin_unlock_irq(&desc->iuspin);
+ }
+
+ if (cntr > count)
+ cntr = count;
+ rv = copy_to_user(buffer, desc->ubuf, cntr);
+ if (rv > 0) {
+ rv = -EFAULT;
+ goto err;
+ }
+
+ spin_lock_irq(&desc->iuspin);
+
+ for (i = 0; i < desc->length - cntr; i++)
+ desc->ubuf[i] = desc->ubuf[i + cntr];
+
+ desc->length -= cntr;
+ /* in case we had outstanding data */
+ if (!desc->length) {
+ clear_bit(WDM_READ, &desc->flags);
+ service_outstanding_interrupt(desc);
+ }
+ spin_unlock_irq(&desc->iuspin);
+ rv = cntr;
+
+err:
+ mutex_unlock(&desc->rlock);
+ return rv;
+}
+
+static int wdm_wait_for_response(struct file *file, long timeout)
+{
+ struct wdm_device *desc = file->private_data;
+ long rv; /* Use long here because (int) MAX_SCHEDULE_TIMEOUT < 0. */
+
+ /*
+ * Needs both flags. We cannot do with one because resetting it would
+ * cause a race with write() yet we need to signal a disconnect.
+ */
+ rv = wait_event_interruptible_timeout(desc->wait,
+ !test_bit(WDM_IN_USE, &desc->flags) ||
+ test_bit(WDM_DISCONNECTING, &desc->flags),
+ timeout);
+
+ /*
+ * To report the correct error. This is best effort.
+ * We are inevitably racing with the hardware.
+ */
+ if (test_bit(WDM_DISCONNECTING, &desc->flags))
+ return -ENODEV;
+ if (!rv)
+ return -EIO;
+ if (rv < 0)
+ return -EINTR;
+
+ spin_lock_irq(&desc->iuspin);
+ rv = desc->werr;
+ desc->werr = 0;
+ spin_unlock_irq(&desc->iuspin);
+
+ return usb_translate_errors(rv);
+
+}
+
+/*
+ * You need to send a signal when you react to malicious or defective hardware.
+ * Also, don't abort when fsync() returned -EINVAL, for older kernels which do
+ * not implement wdm_flush() will return -EINVAL.
+ */
+static int wdm_fsync(struct file *file, loff_t start, loff_t end, int datasync)
+{
+ return wdm_wait_for_response(file, MAX_SCHEDULE_TIMEOUT);
+}
+
+/*
+ * Same with wdm_fsync(), except it uses finite timeout in order to react to
+ * malicious or defective hardware which ceased communication after close() was
+ * implicitly called due to process termination.
+ */
+static int wdm_flush(struct file *file, fl_owner_t id)
+{
+ return wdm_wait_for_response(file, WDM_FLUSH_TIMEOUT);
+}
+
+static __poll_t wdm_poll(struct file *file, struct poll_table_struct *wait)
+{
+ struct wdm_device *desc = file->private_data;
+ unsigned long flags;
+ __poll_t mask = 0;
+
+ spin_lock_irqsave(&desc->iuspin, flags);
+ if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+ mask = EPOLLHUP | EPOLLERR;
+ spin_unlock_irqrestore(&desc->iuspin, flags);
+ goto desc_out;
+ }
+ if (test_bit(WDM_READ, &desc->flags))
+ mask = EPOLLIN | EPOLLRDNORM;
+ if (desc->rerr || desc->werr)
+ mask |= EPOLLERR;
+ if (!test_bit(WDM_IN_USE, &desc->flags))
+ mask |= EPOLLOUT | EPOLLWRNORM;
+ spin_unlock_irqrestore(&desc->iuspin, flags);
+
+ poll_wait(file, &desc->wait, wait);
+
+desc_out:
+ return mask;
+}
+
+static int wdm_open(struct inode *inode, struct file *file)
+{
+ int minor = iminor(inode);
+ int rv = -ENODEV;
+ struct usb_interface *intf;
+ struct wdm_device *desc;
+
+ mutex_lock(&wdm_mutex);
+ desc = wdm_find_device_by_minor(minor);
+ if (!desc)
+ goto out;
+
+ intf = desc->intf;
+ if (test_bit(WDM_DISCONNECTING, &desc->flags))
+ goto out;
+ file->private_data = desc;
+
+ if (test_bit(WDM_WWAN_IN_USE, &desc->flags)) {
+ rv = -EBUSY;
+ goto out;
+ }
+
+ rv = usb_autopm_get_interface(desc->intf);
+ if (rv < 0) {
+ dev_err(&desc->intf->dev, "Error autopm - %d\n", rv);
+ goto out;
+ }
+
+ /* using write lock to protect desc->count */
+ mutex_lock(&desc->wlock);
+ if (!desc->count++) {
+ desc->werr = 0;
+ desc->rerr = 0;
+ rv = usb_submit_urb(desc->validity, GFP_KERNEL);
+ if (rv < 0) {
+ desc->count--;
+ dev_err(&desc->intf->dev,
+ "Error submitting int urb - %d\n", rv);
+ rv = usb_translate_errors(rv);
+ }
+ } else {
+ rv = 0;
+ }
+ mutex_unlock(&desc->wlock);
+ if (desc->count == 1)
+ desc->manage_power(intf, 1);
+ usb_autopm_put_interface(desc->intf);
+out:
+ mutex_unlock(&wdm_mutex);
+ return rv;
+}
+
+static int wdm_release(struct inode *inode, struct file *file)
+{
+ struct wdm_device *desc = file->private_data;
+
+ mutex_lock(&wdm_mutex);
+
+ /* using write lock to protect desc->count */
+ mutex_lock(&desc->wlock);
+ desc->count--;
+ mutex_unlock(&desc->wlock);
+
+ if (!desc->count) {
+ if (!test_bit(WDM_DISCONNECTING, &desc->flags)) {
+ dev_dbg(&desc->intf->dev, "wdm_release: cleanup\n");
+ poison_urbs(desc);
+ spin_lock_irq(&desc->iuspin);
+ desc->resp_count = 0;
+ clear_bit(WDM_RESPONDING, &desc->flags);
+ spin_unlock_irq(&desc->iuspin);
+ desc->manage_power(desc->intf, 0);
+ unpoison_urbs(desc);
+ } else {
+ /* must avoid dev_printk here as desc->intf is invalid */
+ pr_debug(KBUILD_MODNAME " %s: device gone - cleaning up\n", __func__);
+ cleanup(desc);
+ }
+ }
+ mutex_unlock(&wdm_mutex);
+ return 0;
+}
+
+static long wdm_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct wdm_device *desc = file->private_data;
+ int rv = 0;
+
+ switch (cmd) {
+ case IOCTL_WDM_MAX_COMMAND:
+ if (copy_to_user((void __user *)arg, &desc->wMaxCommand, sizeof(desc->wMaxCommand)))
+ rv = -EFAULT;
+ break;
+ default:
+ rv = -ENOTTY;
+ }
+ return rv;
+}
+
+static const struct file_operations wdm_fops = {
+ .owner = THIS_MODULE,
+ .read = wdm_read,
+ .write = wdm_write,
+ .fsync = wdm_fsync,
+ .open = wdm_open,
+ .flush = wdm_flush,
+ .release = wdm_release,
+ .poll = wdm_poll,
+ .unlocked_ioctl = wdm_ioctl,
+ .compat_ioctl = compat_ptr_ioctl,
+ .llseek = noop_llseek,
+};
+
+static struct usb_class_driver wdm_class = {
+ .name = "cdc-wdm%d",
+ .fops = &wdm_fops,
+ .minor_base = WDM_MINOR_BASE,
+};
+
+/* --- WWAN framework integration --- */
+#ifdef CONFIG_WWAN
+static int wdm_wwan_port_start(struct wwan_port *port)
+{
+ struct wdm_device *desc = wwan_port_get_drvdata(port);
+
+ /* The interface is both exposed via the WWAN framework and as a
+ * legacy usbmisc chardev. If chardev is already open, just fail
+ * to prevent concurrent usage. Otherwise, switch to WWAN mode.
+ */
+ mutex_lock(&wdm_mutex);
+ if (desc->count) {
+ mutex_unlock(&wdm_mutex);
+ return -EBUSY;
+ }
+ set_bit(WDM_WWAN_IN_USE, &desc->flags);
+ mutex_unlock(&wdm_mutex);
+
+ desc->manage_power(desc->intf, 1);
+
+ /* tx is allowed */
+ wwan_port_txon(port);
+
+ /* Start getting events */
+ return usb_submit_urb(desc->validity, GFP_KERNEL);
+}
+
+static void wdm_wwan_port_stop(struct wwan_port *port)
+{
+ struct wdm_device *desc = wwan_port_get_drvdata(port);
+
+ /* Stop all transfers and disable WWAN mode */
+ poison_urbs(desc);
+ desc->manage_power(desc->intf, 0);
+ clear_bit(WDM_READ, &desc->flags);
+ clear_bit(WDM_WWAN_IN_USE, &desc->flags);
+ unpoison_urbs(desc);
+}
+
+static void wdm_wwan_port_tx_complete(struct urb *urb)
+{
+ struct sk_buff *skb = urb->context;
+ struct wdm_device *desc = skb_shinfo(skb)->destructor_arg;
+
+ usb_autopm_put_interface(desc->intf);
+ wwan_port_txon(desc->wwanp);
+ kfree_skb(skb);
+}
+
+static int wdm_wwan_port_tx(struct wwan_port *port, struct sk_buff *skb)
+{
+ struct wdm_device *desc = wwan_port_get_drvdata(port);
+ struct usb_interface *intf = desc->intf;
+ struct usb_ctrlrequest *req = desc->orq;
+ int rv;
+
+ rv = usb_autopm_get_interface(intf);
+ if (rv)
+ return rv;
+
+ usb_fill_control_urb(
+ desc->command,
+ interface_to_usbdev(intf),
+ usb_sndctrlpipe(interface_to_usbdev(intf), 0),
+ (unsigned char *)req,
+ skb->data,
+ skb->len,
+ wdm_wwan_port_tx_complete,
+ skb
+ );
+
+ req->bRequestType = (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE);
+ req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND;
+ req->wValue = 0;
+ req->wIndex = desc->inum;
+ req->wLength = cpu_to_le16(skb->len);
+
+ skb_shinfo(skb)->destructor_arg = desc;
+
+ rv = usb_submit_urb(desc->command, GFP_KERNEL);
+ if (rv)
+ usb_autopm_put_interface(intf);
+ else /* One transfer at a time, stop TX until URB completion */
+ wwan_port_txoff(port);
+
+ return rv;
+}
+
+static const struct wwan_port_ops wdm_wwan_port_ops = {
+ .start = wdm_wwan_port_start,
+ .stop = wdm_wwan_port_stop,
+ .tx = wdm_wwan_port_tx,
+};
+
+static void wdm_wwan_init(struct wdm_device *desc)
+{
+ struct usb_interface *intf = desc->intf;
+ struct wwan_port *port;
+
+ /* Only register to WWAN core if protocol/type is known */
+ if (desc->wwanp_type == WWAN_PORT_UNKNOWN) {
+ dev_info(&intf->dev, "Unknown control protocol\n");
+ return;
+ }
+
+ port = wwan_create_port(&intf->dev, desc->wwanp_type, &wdm_wwan_port_ops, desc);
+ if (IS_ERR(port)) {
+ dev_err(&intf->dev, "%s: Unable to create WWAN port\n",
+ dev_name(intf->usb_dev));
+ return;
+ }
+
+ desc->wwanp = port;
+}
+
+static void wdm_wwan_deinit(struct wdm_device *desc)
+{
+ if (!desc->wwanp)
+ return;
+
+ wwan_remove_port(desc->wwanp);
+ desc->wwanp = NULL;
+}
+
+static void wdm_wwan_rx(struct wdm_device *desc, int length)
+{
+ struct wwan_port *port = desc->wwanp;
+ struct sk_buff *skb;
+
+ /* Forward data to WWAN port */
+ skb = alloc_skb(length, GFP_ATOMIC);
+ if (!skb)
+ return;
+
+ skb_put_data(skb, desc->inbuf, length);
+ wwan_port_rx(port, skb);
+
+ /* inbuf has been copied, it is safe to check for outstanding data */
+ schedule_work(&desc->service_outs_intr);
+}
+#else /* CONFIG_WWAN */
+static void wdm_wwan_init(struct wdm_device *desc) {}
+static void wdm_wwan_deinit(struct wdm_device *desc) {}
+static void wdm_wwan_rx(struct wdm_device *desc, int length) {}
+#endif /* CONFIG_WWAN */
+
+/* --- error handling --- */
+static void wdm_rxwork(struct work_struct *work)
+{
+ struct wdm_device *desc = container_of(work, struct wdm_device, rxwork);
+ unsigned long flags;
+ int rv = 0;
+ int responding;
+
+ spin_lock_irqsave(&desc->iuspin, flags);
+ if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+ spin_unlock_irqrestore(&desc->iuspin, flags);
+ } else {
+ responding = test_and_set_bit(WDM_RESPONDING, &desc->flags);
+ spin_unlock_irqrestore(&desc->iuspin, flags);
+ if (!responding)
+ rv = usb_submit_urb(desc->response, GFP_KERNEL);
+ if (rv < 0 && rv != -EPERM) {
+ spin_lock_irqsave(&desc->iuspin, flags);
+ clear_bit(WDM_RESPONDING, &desc->flags);
+ if (!test_bit(WDM_DISCONNECTING, &desc->flags))
+ schedule_work(&desc->rxwork);
+ spin_unlock_irqrestore(&desc->iuspin, flags);
+ }
+ }
+}
+
+static void service_interrupt_work(struct work_struct *work)
+{
+ struct wdm_device *desc;
+
+ desc = container_of(work, struct wdm_device, service_outs_intr);
+
+ spin_lock_irq(&desc->iuspin);
+ service_outstanding_interrupt(desc);
+ if (!desc->resp_count) {
+ set_bit(WDM_READ, &desc->flags);
+ wake_up(&desc->wait);
+ }
+ spin_unlock_irq(&desc->iuspin);
+}
+
+/* --- hotplug --- */
+
+static int wdm_create(struct usb_interface *intf, struct usb_endpoint_descriptor *ep,
+ u16 bufsize, enum wwan_port_type type,
+ int (*manage_power)(struct usb_interface *, int))
+{
+ int rv = -ENOMEM;
+ struct wdm_device *desc;
+
+ desc = kzalloc(sizeof(struct wdm_device), GFP_KERNEL);
+ if (!desc)
+ goto out;
+ INIT_LIST_HEAD(&desc->device_list);
+ mutex_init(&desc->rlock);
+ mutex_init(&desc->wlock);
+ spin_lock_init(&desc->iuspin);
+ init_waitqueue_head(&desc->wait);
+ desc->wMaxCommand = bufsize;
+ /* this will be expanded and needed in hardware endianness */
+ desc->inum = cpu_to_le16((u16)intf->cur_altsetting->desc.bInterfaceNumber);
+ desc->intf = intf;
+ desc->wwanp_type = type;
+ INIT_WORK(&desc->rxwork, wdm_rxwork);
+ INIT_WORK(&desc->service_outs_intr, service_interrupt_work);
+
+ if (!usb_endpoint_is_int_in(ep)) {
+ rv = -EINVAL;
+ goto err;
+ }
+
+ desc->wMaxPacketSize = usb_endpoint_maxp(ep);
+
+ desc->orq = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
+ if (!desc->orq)
+ goto err;
+ desc->irq = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
+ if (!desc->irq)
+ goto err;
+
+ desc->validity = usb_alloc_urb(0, GFP_KERNEL);
+ if (!desc->validity)
+ goto err;
+
+ desc->response = usb_alloc_urb(0, GFP_KERNEL);
+ if (!desc->response)
+ goto err;
+
+ desc->command = usb_alloc_urb(0, GFP_KERNEL);
+ if (!desc->command)
+ goto err;
+
+ desc->ubuf = kmalloc(desc->wMaxCommand, GFP_KERNEL);
+ if (!desc->ubuf)
+ goto err;
+
+ desc->sbuf = kmalloc(desc->wMaxPacketSize, GFP_KERNEL);
+ if (!desc->sbuf)
+ goto err;
+
+ desc->inbuf = kmalloc(desc->wMaxCommand, GFP_KERNEL);
+ if (!desc->inbuf)
+ goto err;
+
+ usb_fill_int_urb(
+ desc->validity,
+ interface_to_usbdev(intf),
+ usb_rcvintpipe(interface_to_usbdev(intf), ep->bEndpointAddress),
+ desc->sbuf,
+ desc->wMaxPacketSize,
+ wdm_int_callback,
+ desc,
+ ep->bInterval
+ );
+
+ desc->irq->bRequestType = (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE);
+ desc->irq->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE;
+ desc->irq->wValue = 0;
+ desc->irq->wIndex = desc->inum; /* already converted */
+ desc->irq->wLength = cpu_to_le16(desc->wMaxCommand);
+
+ usb_fill_control_urb(
+ desc->response,
+ interface_to_usbdev(intf),
+ /* using common endpoint 0 */
+ usb_rcvctrlpipe(interface_to_usbdev(desc->intf), 0),
+ (unsigned char *)desc->irq,
+ desc->inbuf,
+ desc->wMaxCommand,
+ wdm_in_callback,
+ desc
+ );
+
+ desc->manage_power = manage_power;
+
+ spin_lock(&wdm_device_list_lock);
+ list_add(&desc->device_list, &wdm_device_list);
+ spin_unlock(&wdm_device_list_lock);
+
+ rv = usb_register_dev(intf, &wdm_class);
+ if (rv < 0)
+ goto err;
+ else
+ dev_info(&intf->dev, "%s: USB WDM device\n", dev_name(intf->usb_dev));
+
+ wdm_wwan_init(desc);
+
+out:
+ return rv;
+err:
+ spin_lock(&wdm_device_list_lock);
+ list_del(&desc->device_list);
+ spin_unlock(&wdm_device_list_lock);
+ cleanup(desc);
+ return rv;
+}
+
+static int wdm_manage_power(struct usb_interface *intf, int on)
+{
+ /* need autopm_get/put here to ensure the usbcore sees the new value */
+ int rv = usb_autopm_get_interface(intf);
+
+ intf->needs_remote_wakeup = on;
+ if (!rv)
+ usb_autopm_put_interface(intf);
+ return 0;
+}
+
+static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ int rv = -EINVAL;
+ struct usb_host_interface *iface;
+ struct usb_endpoint_descriptor *ep;
+ struct usb_cdc_parsed_header hdr;
+ u8 *buffer = intf->altsetting->extra;
+ int buflen = intf->altsetting->extralen;
+ u16 maxcom = WDM_DEFAULT_BUFSIZE;
+
+ if (!buffer)
+ goto err;
+
+ cdc_parse_cdc_header(&hdr, intf, buffer, buflen);
+
+ if (hdr.usb_cdc_dmm_desc)
+ maxcom = le16_to_cpu(hdr.usb_cdc_dmm_desc->wMaxCommand);
+
+ iface = intf->cur_altsetting;
+ if (iface->desc.bNumEndpoints != 1)
+ goto err;
+ ep = &iface->endpoint[0].desc;
+
+ rv = wdm_create(intf, ep, maxcom, WWAN_PORT_UNKNOWN, &wdm_manage_power);
+
+err:
+ return rv;
+}
+
+/**
+ * usb_cdc_wdm_register - register a WDM subdriver
+ * @intf: usb interface the subdriver will associate with
+ * @ep: interrupt endpoint to monitor for notifications
+ * @bufsize: maximum message size to support for read/write
+ * @type: Type/protocol of the transported data (MBIM, QMI...)
+ * @manage_power: call-back invoked during open and release to
+ * manage the device's power
+ * Create WDM usb class character device and associate it with intf
+ * without binding, allowing another driver to manage the interface.
+ *
+ * The subdriver will manage the given interrupt endpoint exclusively
+ * and will issue control requests referring to the given intf. It
+ * will otherwise avoid interferring, and in particular not do
+ * usb_set_intfdata/usb_get_intfdata on intf.
+ *
+ * The return value is a pointer to the subdriver's struct usb_driver.
+ * The registering driver is responsible for calling this subdriver's
+ * disconnect, suspend, resume, pre_reset and post_reset methods from
+ * its own.
+ */
+struct usb_driver *usb_cdc_wdm_register(struct usb_interface *intf,
+ struct usb_endpoint_descriptor *ep,
+ int bufsize, enum wwan_port_type type,
+ int (*manage_power)(struct usb_interface *, int))
+{
+ int rv;
+
+ rv = wdm_create(intf, ep, bufsize, type, manage_power);
+ if (rv < 0)
+ goto err;
+
+ return &wdm_driver;
+err:
+ return ERR_PTR(rv);
+}
+EXPORT_SYMBOL(usb_cdc_wdm_register);
+
+static void wdm_disconnect(struct usb_interface *intf)
+{
+ struct wdm_device *desc;
+ unsigned long flags;
+
+ usb_deregister_dev(intf, &wdm_class);
+ desc = wdm_find_device(intf);
+ mutex_lock(&wdm_mutex);
+
+ wdm_wwan_deinit(desc);
+
+ /* the spinlock makes sure no new urbs are generated in the callbacks */
+ spin_lock_irqsave(&desc->iuspin, flags);
+ set_bit(WDM_DISCONNECTING, &desc->flags);
+ set_bit(WDM_READ, &desc->flags);
+ spin_unlock_irqrestore(&desc->iuspin, flags);
+ wake_up_all(&desc->wait);
+ mutex_lock(&desc->rlock);
+ mutex_lock(&desc->wlock);
+ poison_urbs(desc);
+ cancel_work_sync(&desc->rxwork);
+ cancel_work_sync(&desc->service_outs_intr);
+ mutex_unlock(&desc->wlock);
+ mutex_unlock(&desc->rlock);
+
+ /* the desc->intf pointer used as list key is now invalid */
+ spin_lock(&wdm_device_list_lock);
+ list_del(&desc->device_list);
+ spin_unlock(&wdm_device_list_lock);
+
+ if (!desc->count)
+ cleanup(desc);
+ else
+ dev_dbg(&intf->dev, "%d open files - postponing cleanup\n", desc->count);
+ mutex_unlock(&wdm_mutex);
+}
+
+#ifdef CONFIG_PM
+static int wdm_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct wdm_device *desc = wdm_find_device(intf);
+ int rv = 0;
+
+ dev_dbg(&desc->intf->dev, "wdm%d_suspend\n", intf->minor);
+
+ /* if this is an autosuspend the caller does the locking */
+ if (!PMSG_IS_AUTO(message)) {
+ mutex_lock(&desc->rlock);
+ mutex_lock(&desc->wlock);
+ }
+ spin_lock_irq(&desc->iuspin);
+
+ if (PMSG_IS_AUTO(message) &&
+ (test_bit(WDM_IN_USE, &desc->flags)
+ || test_bit(WDM_RESPONDING, &desc->flags))) {
+ spin_unlock_irq(&desc->iuspin);
+ rv = -EBUSY;
+ } else {
+
+ set_bit(WDM_SUSPENDING, &desc->flags);
+ spin_unlock_irq(&desc->iuspin);
+ /* callback submits work - order is essential */
+ poison_urbs(desc);
+ cancel_work_sync(&desc->rxwork);
+ cancel_work_sync(&desc->service_outs_intr);
+ unpoison_urbs(desc);
+ }
+ if (!PMSG_IS_AUTO(message)) {
+ mutex_unlock(&desc->wlock);
+ mutex_unlock(&desc->rlock);
+ }
+
+ return rv;
+}
+#endif
+
+static int recover_from_urb_loss(struct wdm_device *desc)
+{
+ int rv = 0;
+
+ if (desc->count) {
+ rv = usb_submit_urb(desc->validity, GFP_NOIO);
+ if (rv < 0)
+ dev_err(&desc->intf->dev,
+ "Error resume submitting int urb - %d\n", rv);
+ }
+ return rv;
+}
+
+#ifdef CONFIG_PM
+static int wdm_resume(struct usb_interface *intf)
+{
+ struct wdm_device *desc = wdm_find_device(intf);
+ int rv;
+
+ dev_dbg(&desc->intf->dev, "wdm%d_resume\n", intf->minor);
+
+ clear_bit(WDM_SUSPENDING, &desc->flags);
+ rv = recover_from_urb_loss(desc);
+
+ return rv;
+}
+#endif
+
+static int wdm_pre_reset(struct usb_interface *intf)
+{
+ struct wdm_device *desc = wdm_find_device(intf);
+
+ /*
+ * we notify everybody using poll of
+ * an exceptional situation
+ * must be done before recovery lest a spontaneous
+ * message from the device is lost
+ */
+ spin_lock_irq(&desc->iuspin);
+ set_bit(WDM_RESETTING, &desc->flags); /* inform read/write */
+ set_bit(WDM_READ, &desc->flags); /* unblock read */
+ clear_bit(WDM_IN_USE, &desc->flags); /* unblock write */
+ desc->rerr = -EINTR;
+ spin_unlock_irq(&desc->iuspin);
+ wake_up_all(&desc->wait);
+ mutex_lock(&desc->rlock);
+ mutex_lock(&desc->wlock);
+ poison_urbs(desc);
+ cancel_work_sync(&desc->rxwork);
+ cancel_work_sync(&desc->service_outs_intr);
+ return 0;
+}
+
+static int wdm_post_reset(struct usb_interface *intf)
+{
+ struct wdm_device *desc = wdm_find_device(intf);
+ int rv;
+
+ unpoison_urbs(desc);
+ clear_bit(WDM_OVERFLOW, &desc->flags);
+ clear_bit(WDM_RESETTING, &desc->flags);
+ rv = recover_from_urb_loss(desc);
+ mutex_unlock(&desc->wlock);
+ mutex_unlock(&desc->rlock);
+ return rv;
+}
+
+static struct usb_driver wdm_driver = {
+ .name = "cdc_wdm",
+ .probe = wdm_probe,
+ .disconnect = wdm_disconnect,
+#ifdef CONFIG_PM
+ .suspend = wdm_suspend,
+ .resume = wdm_resume,
+ .reset_resume = wdm_resume,
+#endif
+ .pre_reset = wdm_pre_reset,
+ .post_reset = wdm_post_reset,
+ .id_table = wdm_ids,
+ .supports_autosuspend = 1,
+ .disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(wdm_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
new file mode 100644
index 000000000..f27b4aecf
--- /dev/null
+++ b/drivers/usb/class/usblp.c
@@ -0,0 +1,1474 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * usblp.c
+ *
+ * Copyright (c) 1999 Michael Gee <michael@linuxspecific.com>
+ * Copyright (c) 1999 Pavel Machek <pavel@ucw.cz>
+ * Copyright (c) 2000 Randy Dunlap <rdunlap@xenotime.net>
+ * Copyright (c) 2000 Vojtech Pavlik <vojtech@suse.cz>
+ # Copyright (c) 2001 Pete Zaitcev <zaitcev@redhat.com>
+ # Copyright (c) 2001 David Paschal <paschal@rcsis.com>
+ * Copyright (c) 2006 Oliver Neukum <oliver@neukum.name>
+ *
+ * USB Printer Device Class driver for USB printers and printer cables
+ *
+ * Sponsored by SuSE
+ *
+ * ChangeLog:
+ * v0.1 - thorough cleaning, URBification, almost a rewrite
+ * v0.2 - some more cleanups
+ * v0.3 - cleaner again, waitqueue fixes
+ * v0.4 - fixes in unidirectional mode
+ * v0.5 - add DEVICE_ID string support
+ * v0.6 - never time out
+ * v0.7 - fixed bulk-IN read and poll (David Paschal)
+ * v0.8 - add devfs support
+ * v0.9 - fix unplug-while-open paths
+ * v0.10- remove sleep_on, fix error on oom (oliver@neukum.org)
+ * v0.11 - add proto_bias option (Pete Zaitcev)
+ * v0.12 - add hpoj.sourceforge.net ioctls (David Paschal)
+ * v0.13 - alloc space for statusbuf (<status> not on stack);
+ * use usb_alloc_coherent() for read buf & write buf;
+ * none - Maintained in Linux kernel after v0.13
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched/signal.h>
+#include <linux/signal.h>
+#include <linux/poll.h>
+#include <linux/slab.h>
+#include <linux/lp.h>
+#include <linux/mutex.h>
+#undef DEBUG
+#include <linux/usb.h>
+#include <linux/usb/ch9.h>
+#include <linux/ratelimit.h>
+
+/*
+ * Version Information
+ */
+#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
+#define DRIVER_DESC "USB Printer Device Class driver"
+
+#define USBLP_BUF_SIZE 8192
+#define USBLP_BUF_SIZE_IN 1024
+#define USBLP_DEVICE_ID_SIZE 1024
+
+/* ioctls: */
+#define IOCNR_GET_DEVICE_ID 1
+#define IOCNR_GET_PROTOCOLS 2
+#define IOCNR_SET_PROTOCOL 3
+#define IOCNR_HP_SET_CHANNEL 4
+#define IOCNR_GET_BUS_ADDRESS 5
+#define IOCNR_GET_VID_PID 6
+#define IOCNR_SOFT_RESET 7
+/* Get device_id string: */
+#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
+/* The following ioctls were added for http://hpoj.sourceforge.net:
+ * Get two-int array:
+ * [0]=current protocol
+ * (1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2,
+ * 3=USB_CLASS_PRINTER/1/3),
+ * [1]=supported protocol mask (mask&(1<<n)!=0 means
+ * USB_CLASS_PRINTER/1/n supported):
+ */
+#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
+/*
+ * Set protocol
+ * (arg: 1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2,
+ * 3=USB_CLASS_PRINTER/1/3):
+ */
+#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
+/* Set channel number (HP Vendor-specific command): */
+#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
+/* Get two-int array: [0]=bus number, [1]=device address: */
+#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
+/* Get two-int array: [0]=vendor ID, [1]=product ID: */
+#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
+/* Perform class specific soft reset */
+#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
+
+/*
+ * A DEVICE_ID string may include the printer's serial number.
+ * It should end with a semi-colon (';').
+ * An example from an HP 970C DeskJet printer is (this is one long string,
+ * with the serial number changed):
+MFG:HEWLETT-PACKARD;MDL:DESKJET 970C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hewlett-Packard DeskJet 970C;SERN:US970CSEPROF;VSTATUS:$HB0$NC0,ff,DN,IDLE,CUT,K1,C0,DP,NR,KP000,CP027;VP:0800,FL,B0;VJ: ;
+ */
+
+/*
+ * USB Printer Requests
+ */
+
+#define USBLP_REQ_GET_ID 0x00
+#define USBLP_REQ_GET_STATUS 0x01
+#define USBLP_REQ_RESET 0x02
+#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00 /* HP Vendor-specific */
+
+#define USBLP_MINORS 16
+#define USBLP_MINOR_BASE 0
+
+#define USBLP_CTL_TIMEOUT 5000 /* 5 seconds */
+
+#define USBLP_FIRST_PROTOCOL 1
+#define USBLP_LAST_PROTOCOL 3
+#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
+
+/*
+ * some arbitrary status buffer size;
+ * need a status buffer that is allocated via kmalloc(), not on stack
+ */
+#define STATUS_BUF_SIZE 8
+
+/*
+ * Locks down the locking order:
+ * ->wmut locks wstatus.
+ * ->mut locks the whole usblp, except [rw]complete, and thus, by indirection,
+ * [rw]status. We only touch status when we know the side idle.
+ * ->lock locks what interrupt accesses.
+ */
+struct usblp {
+ struct usb_device *dev; /* USB device */
+ struct mutex wmut;
+ struct mutex mut;
+ spinlock_t lock; /* locks rcomplete, wcomplete */
+ char *readbuf; /* read transfer_buffer */
+ char *statusbuf; /* status transfer_buffer */
+ struct usb_anchor urbs;
+ wait_queue_head_t rwait, wwait;
+ int readcount; /* Counter for reads */
+ int ifnum; /* Interface number */
+ struct usb_interface *intf; /* The interface */
+ /*
+ * Alternate-setting numbers and endpoints for each protocol
+ * (USB_CLASS_PRINTER/1/{index=1,2,3}) that the device supports:
+ */
+ struct {
+ int alt_setting;
+ struct usb_endpoint_descriptor *epwrite;
+ struct usb_endpoint_descriptor *epread;
+ } protocol[USBLP_MAX_PROTOCOLS];
+ int current_protocol;
+ int minor; /* minor number of device */
+ int wcomplete, rcomplete;
+ int wstatus; /* bytes written or error */
+ int rstatus; /* bytes ready or error */
+ unsigned int quirks; /* quirks flags */
+ unsigned int flags; /* mode flags */
+ unsigned char used; /* True if open */
+ unsigned char present; /* True if not disconnected */
+ unsigned char bidir; /* interface is bidirectional */
+ unsigned char no_paper; /* Paper Out happened */
+ unsigned char *device_id_string; /* IEEE 1284 DEVICE ID string (ptr) */
+ /* first 2 bytes are (big-endian) length */
+};
+
+#ifdef DEBUG
+static void usblp_dump(struct usblp *usblp)
+{
+ struct device *dev = &usblp->intf->dev;
+ int p;
+
+ dev_dbg(dev, "usblp=0x%p\n", usblp);
+ dev_dbg(dev, "dev=0x%p\n", usblp->dev);
+ dev_dbg(dev, "present=%d\n", usblp->present);
+ dev_dbg(dev, "readbuf=0x%p\n", usblp->readbuf);
+ dev_dbg(dev, "readcount=%d\n", usblp->readcount);
+ dev_dbg(dev, "ifnum=%d\n", usblp->ifnum);
+ for (p = USBLP_FIRST_PROTOCOL; p <= USBLP_LAST_PROTOCOL; p++) {
+ dev_dbg(dev, "protocol[%d].alt_setting=%d\n", p,
+ usblp->protocol[p].alt_setting);
+ dev_dbg(dev, "protocol[%d].epwrite=%p\n", p,
+ usblp->protocol[p].epwrite);
+ dev_dbg(dev, "protocol[%d].epread=%p\n", p,
+ usblp->protocol[p].epread);
+ }
+ dev_dbg(dev, "current_protocol=%d\n", usblp->current_protocol);
+ dev_dbg(dev, "minor=%d\n", usblp->minor);
+ dev_dbg(dev, "wstatus=%d\n", usblp->wstatus);
+ dev_dbg(dev, "rstatus=%d\n", usblp->rstatus);
+ dev_dbg(dev, "quirks=%d\n", usblp->quirks);
+ dev_dbg(dev, "used=%d\n", usblp->used);
+ dev_dbg(dev, "bidir=%d\n", usblp->bidir);
+ dev_dbg(dev, "device_id_string=\"%s\"\n",
+ usblp->device_id_string ?
+ usblp->device_id_string + 2 :
+ (unsigned char *)"(null)");
+}
+#endif
+
+/* Quirks: various printer quirks are handled by this table & its flags. */
+
+struct quirk_printer_struct {
+ __u16 vendorId;
+ __u16 productId;
+ unsigned int quirks;
+};
+
+#define USBLP_QUIRK_BIDIR 0x1 /* reports bidir but requires unidirectional mode (no INs/reads) */
+#define USBLP_QUIRK_USB_INIT 0x2 /* needs vendor USB init string */
+#define USBLP_QUIRK_BAD_CLASS 0x4 /* descriptor uses vendor-specific Class or SubClass */
+
+static const struct quirk_printer_struct quirk_printers[] = {
+ { 0x03f0, 0x0004, USBLP_QUIRK_BIDIR }, /* HP DeskJet 895C */
+ { 0x03f0, 0x0104, USBLP_QUIRK_BIDIR }, /* HP DeskJet 880C */
+ { 0x03f0, 0x0204, USBLP_QUIRK_BIDIR }, /* HP DeskJet 815C */
+ { 0x03f0, 0x0304, USBLP_QUIRK_BIDIR }, /* HP DeskJet 810C/812C */
+ { 0x03f0, 0x0404, USBLP_QUIRK_BIDIR }, /* HP DeskJet 830C */
+ { 0x03f0, 0x0504, USBLP_QUIRK_BIDIR }, /* HP DeskJet 885C */
+ { 0x03f0, 0x0604, USBLP_QUIRK_BIDIR }, /* HP DeskJet 840C */
+ { 0x03f0, 0x0804, USBLP_QUIRK_BIDIR }, /* HP DeskJet 816C */
+ { 0x03f0, 0x1104, USBLP_QUIRK_BIDIR }, /* HP Deskjet 959C */
+ { 0x0409, 0xefbe, USBLP_QUIRK_BIDIR }, /* NEC Picty900 (HP OEM) */
+ { 0x0409, 0xbef4, USBLP_QUIRK_BIDIR }, /* NEC Picty760 (HP OEM) */
+ { 0x0409, 0xf0be, USBLP_QUIRK_BIDIR }, /* NEC Picty920 (HP OEM) */
+ { 0x0409, 0xf1be, USBLP_QUIRK_BIDIR }, /* NEC Picty800 (HP OEM) */
+ { 0x0482, 0x0010, USBLP_QUIRK_BIDIR }, /* Kyocera Mita FS 820, by zut <kernel@zut.de> */
+ { 0x04f9, 0x000d, USBLP_QUIRK_BIDIR }, /* Brother Industries, Ltd HL-1440 Laser Printer */
+ { 0x04b8, 0x0202, USBLP_QUIRK_BAD_CLASS }, /* Seiko Epson Receipt Printer M129C */
+ { 0, 0 }
+};
+
+static int usblp_wwait(struct usblp *usblp, int nonblock);
+static int usblp_wtest(struct usblp *usblp, int nonblock);
+static int usblp_rwait_and_lock(struct usblp *usblp, int nonblock);
+static int usblp_rtest(struct usblp *usblp, int nonblock);
+static int usblp_submit_read(struct usblp *usblp);
+static int usblp_select_alts(struct usblp *usblp);
+static int usblp_set_protocol(struct usblp *usblp, int protocol);
+static int usblp_cache_device_id_string(struct usblp *usblp);
+
+/* forward reference to make our lives easier */
+static struct usb_driver usblp_driver;
+static DEFINE_MUTEX(usblp_mutex); /* locks the existence of usblp's */
+
+/*
+ * Functions for usblp control messages.
+ */
+
+static int usblp_ctrl_msg(struct usblp *usblp, int request, int type, int dir, int recip, int value, void *buf, int len)
+{
+ int retval;
+ int index = usblp->ifnum;
+
+ /* High byte has the interface index.
+ Low byte has the alternate setting.
+ */
+ if ((request == USBLP_REQ_GET_ID) && (type == USB_TYPE_CLASS))
+ index = (usblp->ifnum<<8)|usblp->protocol[usblp->current_protocol].alt_setting;
+
+ retval = usb_control_msg(usblp->dev,
+ dir ? usb_rcvctrlpipe(usblp->dev, 0) : usb_sndctrlpipe(usblp->dev, 0),
+ request, type | dir | recip, value, index, buf, len, USBLP_CTL_TIMEOUT);
+ dev_dbg(&usblp->intf->dev,
+ "usblp_control_msg: rq: 0x%02x dir: %d recip: %d value: %d idx: %d len: %#x result: %d\n",
+ request, !!dir, recip, value, index, len, retval);
+ return retval < 0 ? retval : 0;
+}
+
+#define usblp_read_status(usblp, status)\
+ usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
+#define usblp_get_id(usblp, config, id, maxlen)\
+ usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
+#define usblp_reset(usblp)\
+ usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
+
+static int usblp_hp_channel_change_request(struct usblp *usblp, int channel, u8 *new_channel)
+{
+ u8 *buf;
+ int ret;
+
+ buf = kzalloc(1, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST,
+ USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE,
+ channel, buf, 1);
+ if (ret == 0)
+ *new_channel = buf[0];
+
+ kfree(buf);
+
+ return ret;
+}
+
+/*
+ * See the description for usblp_select_alts() below for the usage
+ * explanation. Look into your /sys/kernel/debug/usb/devices and dmesg in
+ * case of any trouble.
+ */
+static int proto_bias = -1;
+
+/*
+ * URB callback.
+ */
+
+static void usblp_bulk_read(struct urb *urb)
+{
+ struct usblp *usblp = urb->context;
+ int status = urb->status;
+ unsigned long flags;
+
+ if (usblp->present && usblp->used) {
+ if (status)
+ printk(KERN_WARNING "usblp%d: "
+ "nonzero read bulk status received: %d\n",
+ usblp->minor, status);
+ }
+ spin_lock_irqsave(&usblp->lock, flags);
+ if (status < 0)
+ usblp->rstatus = status;
+ else
+ usblp->rstatus = urb->actual_length;
+ usblp->rcomplete = 1;
+ wake_up(&usblp->rwait);
+ spin_unlock_irqrestore(&usblp->lock, flags);
+
+ usb_free_urb(urb);
+}
+
+static void usblp_bulk_write(struct urb *urb)
+{
+ struct usblp *usblp = urb->context;
+ int status = urb->status;
+ unsigned long flags;
+
+ if (usblp->present && usblp->used) {
+ if (status)
+ printk(KERN_WARNING "usblp%d: "
+ "nonzero write bulk status received: %d\n",
+ usblp->minor, status);
+ }
+ spin_lock_irqsave(&usblp->lock, flags);
+ if (status < 0)
+ usblp->wstatus = status;
+ else
+ usblp->wstatus = urb->actual_length;
+ usblp->no_paper = 0;
+ usblp->wcomplete = 1;
+ wake_up(&usblp->wwait);
+ spin_unlock_irqrestore(&usblp->lock, flags);
+
+ usb_free_urb(urb);
+}
+
+/*
+ * Get and print printer errors.
+ */
+
+static const char *usblp_messages[] = { "ok", "out of paper", "off-line", "on fire" };
+
+static int usblp_check_status(struct usblp *usblp, int err)
+{
+ unsigned char status, newerr = 0;
+ int error;
+
+ mutex_lock(&usblp->mut);
+ if ((error = usblp_read_status(usblp, usblp->statusbuf)) < 0) {
+ mutex_unlock(&usblp->mut);
+ printk_ratelimited(KERN_ERR
+ "usblp%d: error %d reading printer status\n",
+ usblp->minor, error);
+ return 0;
+ }
+ status = *usblp->statusbuf;
+ mutex_unlock(&usblp->mut);
+
+ if (~status & LP_PERRORP)
+ newerr = 3;
+ if (status & LP_POUTPA)
+ newerr = 1;
+ if (~status & LP_PSELECD)
+ newerr = 2;
+
+ if (newerr != err) {
+ printk(KERN_INFO "usblp%d: %s\n",
+ usblp->minor, usblp_messages[newerr]);
+ }
+
+ return newerr;
+}
+
+static int handle_bidir(struct usblp *usblp)
+{
+ if (usblp->bidir && usblp->used) {
+ if (usblp_submit_read(usblp) < 0)
+ return -EIO;
+ }
+ return 0;
+}
+
+/*
+ * File op functions.
+ */
+
+static int usblp_open(struct inode *inode, struct file *file)
+{
+ int minor = iminor(inode);
+ struct usblp *usblp;
+ struct usb_interface *intf;
+ int retval;
+
+ if (minor < 0)
+ return -ENODEV;
+
+ mutex_lock(&usblp_mutex);
+
+ retval = -ENODEV;
+ intf = usb_find_interface(&usblp_driver, minor);
+ if (!intf)
+ goto out;
+ usblp = usb_get_intfdata(intf);
+ if (!usblp || !usblp->dev || !usblp->present)
+ goto out;
+
+ retval = -EBUSY;
+ if (usblp->used)
+ goto out;
+
+ /*
+ * We do not implement LP_ABORTOPEN/LPABORTOPEN for two reasons:
+ * - We do not want persistent state which close(2) does not clear
+ * - It is not used anyway, according to CUPS people
+ */
+
+ retval = usb_autopm_get_interface(intf);
+ if (retval < 0)
+ goto out;
+ usblp->used = 1;
+ file->private_data = usblp;
+
+ usblp->wcomplete = 1; /* we begin writeable */
+ usblp->wstatus = 0;
+ usblp->rcomplete = 0;
+
+ if (handle_bidir(usblp) < 0) {
+ usb_autopm_put_interface(intf);
+ usblp->used = 0;
+ file->private_data = NULL;
+ retval = -EIO;
+ }
+out:
+ mutex_unlock(&usblp_mutex);
+ return retval;
+}
+
+static void usblp_cleanup(struct usblp *usblp)
+{
+ printk(KERN_INFO "usblp%d: removed\n", usblp->minor);
+
+ kfree(usblp->readbuf);
+ kfree(usblp->device_id_string);
+ kfree(usblp->statusbuf);
+ usb_put_intf(usblp->intf);
+ kfree(usblp);
+}
+
+static void usblp_unlink_urbs(struct usblp *usblp)
+{
+ usb_kill_anchored_urbs(&usblp->urbs);
+}
+
+static int usblp_release(struct inode *inode, struct file *file)
+{
+ struct usblp *usblp = file->private_data;
+
+ usblp->flags &= ~LP_ABORT;
+
+ mutex_lock(&usblp_mutex);
+ usblp->used = 0;
+ if (usblp->present)
+ usblp_unlink_urbs(usblp);
+
+ usb_autopm_put_interface(usblp->intf);
+
+ if (!usblp->present) /* finish cleanup from disconnect */
+ usblp_cleanup(usblp); /* any URBs must be dead */
+
+ mutex_unlock(&usblp_mutex);
+ return 0;
+}
+
+/* No kernel lock - fine */
+static __poll_t usblp_poll(struct file *file, struct poll_table_struct *wait)
+{
+ struct usblp *usblp = file->private_data;
+ __poll_t ret = 0;
+ unsigned long flags;
+
+ /* Should we check file->f_mode & FMODE_WRITE before poll_wait()? */
+ poll_wait(file, &usblp->rwait, wait);
+ poll_wait(file, &usblp->wwait, wait);
+
+ mutex_lock(&usblp->mut);
+ if (!usblp->present)
+ ret |= EPOLLHUP;
+ mutex_unlock(&usblp->mut);
+
+ spin_lock_irqsave(&usblp->lock, flags);
+ if (usblp->bidir && usblp->rcomplete)
+ ret |= EPOLLIN | EPOLLRDNORM;
+ if (usblp->no_paper || usblp->wcomplete)
+ ret |= EPOLLOUT | EPOLLWRNORM;
+ spin_unlock_irqrestore(&usblp->lock, flags);
+ return ret;
+}
+
+static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct usblp *usblp = file->private_data;
+ int length, err, i;
+ unsigned char newChannel;
+ int status;
+ int twoints[2];
+ int retval = 0;
+
+ mutex_lock(&usblp->mut);
+ if (!usblp->present) {
+ retval = -ENODEV;
+ goto done;
+ }
+
+ dev_dbg(&usblp->intf->dev,
+ "usblp_ioctl: cmd=0x%x (%c nr=%d len=%d dir=%d)\n", cmd,
+ _IOC_TYPE(cmd), _IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd));
+
+ if (_IOC_TYPE(cmd) == 'P') /* new-style ioctl number */
+
+ switch (_IOC_NR(cmd)) {
+
+ case IOCNR_GET_DEVICE_ID: /* get the DEVICE_ID string */
+ if (_IOC_DIR(cmd) != _IOC_READ) {
+ retval = -EINVAL;
+ goto done;
+ }
+
+ length = usblp_cache_device_id_string(usblp);
+ if (length < 0) {
+ retval = length;
+ goto done;
+ }
+ if (length > _IOC_SIZE(cmd))
+ length = _IOC_SIZE(cmd); /* truncate */
+
+ if (copy_to_user((void __user *) arg,
+ usblp->device_id_string,
+ (unsigned long) length)) {
+ retval = -EFAULT;
+ goto done;
+ }
+
+ break;
+
+ case IOCNR_GET_PROTOCOLS:
+ if (_IOC_DIR(cmd) != _IOC_READ ||
+ _IOC_SIZE(cmd) < sizeof(twoints)) {
+ retval = -EINVAL;
+ goto done;
+ }
+
+ twoints[0] = usblp->current_protocol;
+ twoints[1] = 0;
+ for (i = USBLP_FIRST_PROTOCOL;
+ i <= USBLP_LAST_PROTOCOL; i++) {
+ if (usblp->protocol[i].alt_setting >= 0)
+ twoints[1] |= (1<<i);
+ }
+
+ if (copy_to_user((void __user *)arg,
+ (unsigned char *)twoints,
+ sizeof(twoints))) {
+ retval = -EFAULT;
+ goto done;
+ }
+
+ break;
+
+ case IOCNR_SET_PROTOCOL:
+ if (_IOC_DIR(cmd) != _IOC_WRITE) {
+ retval = -EINVAL;
+ goto done;
+ }
+
+#ifdef DEBUG
+ if (arg == -10) {
+ usblp_dump(usblp);
+ break;
+ }
+#endif
+
+ usblp_unlink_urbs(usblp);
+ retval = usblp_set_protocol(usblp, arg);
+ if (retval < 0) {
+ usblp_set_protocol(usblp,
+ usblp->current_protocol);
+ }
+ break;
+
+ case IOCNR_HP_SET_CHANNEL:
+ if (_IOC_DIR(cmd) != _IOC_WRITE ||
+ le16_to_cpu(usblp->dev->descriptor.idVendor) != 0x03F0 ||
+ usblp->quirks & USBLP_QUIRK_BIDIR) {
+ retval = -EINVAL;
+ goto done;
+ }
+
+ err = usblp_hp_channel_change_request(usblp,
+ arg, &newChannel);
+ if (err < 0) {
+ dev_err(&usblp->dev->dev,
+ "usblp%d: error = %d setting "
+ "HP channel\n",
+ usblp->minor, err);
+ retval = -EIO;
+ goto done;
+ }
+
+ dev_dbg(&usblp->intf->dev,
+ "usblp%d requested/got HP channel %ld/%d\n",
+ usblp->minor, arg, newChannel);
+ break;
+
+ case IOCNR_GET_BUS_ADDRESS:
+ if (_IOC_DIR(cmd) != _IOC_READ ||
+ _IOC_SIZE(cmd) < sizeof(twoints)) {
+ retval = -EINVAL;
+ goto done;
+ }
+
+ twoints[0] = usblp->dev->bus->busnum;
+ twoints[1] = usblp->dev->devnum;
+ if (copy_to_user((void __user *)arg,
+ (unsigned char *)twoints,
+ sizeof(twoints))) {
+ retval = -EFAULT;
+ goto done;
+ }
+
+ dev_dbg(&usblp->intf->dev,
+ "usblp%d is bus=%d, device=%d\n",
+ usblp->minor, twoints[0], twoints[1]);
+ break;
+
+ case IOCNR_GET_VID_PID:
+ if (_IOC_DIR(cmd) != _IOC_READ ||
+ _IOC_SIZE(cmd) < sizeof(twoints)) {
+ retval = -EINVAL;
+ goto done;
+ }
+
+ twoints[0] = le16_to_cpu(usblp->dev->descriptor.idVendor);
+ twoints[1] = le16_to_cpu(usblp->dev->descriptor.idProduct);
+ if (copy_to_user((void __user *)arg,
+ (unsigned char *)twoints,
+ sizeof(twoints))) {
+ retval = -EFAULT;
+ goto done;
+ }
+
+ dev_dbg(&usblp->intf->dev,
+ "usblp%d is VID=0x%4.4X, PID=0x%4.4X\n",
+ usblp->minor, twoints[0], twoints[1]);
+ break;
+
+ case IOCNR_SOFT_RESET:
+ if (_IOC_DIR(cmd) != _IOC_NONE) {
+ retval = -EINVAL;
+ goto done;
+ }
+ retval = usblp_reset(usblp);
+ break;
+ default:
+ retval = -ENOTTY;
+ }
+ else /* old-style ioctl value */
+ switch (cmd) {
+
+ case LPGETSTATUS:
+ retval = usblp_read_status(usblp, usblp->statusbuf);
+ if (retval) {
+ printk_ratelimited(KERN_ERR "usblp%d:"
+ "failed reading printer status (%d)\n",
+ usblp->minor, retval);
+ retval = -EIO;
+ goto done;
+ }
+ status = *usblp->statusbuf;
+ if (copy_to_user((void __user *)arg, &status, sizeof(int)))
+ retval = -EFAULT;
+ break;
+
+ case LPABORT:
+ if (arg)
+ usblp->flags |= LP_ABORT;
+ else
+ usblp->flags &= ~LP_ABORT;
+ break;
+
+ default:
+ retval = -ENOTTY;
+ }
+
+done:
+ mutex_unlock(&usblp->mut);
+ return retval;
+}
+
+static struct urb *usblp_new_writeurb(struct usblp *usblp, int transfer_length)
+{
+ struct urb *urb;
+ char *writebuf;
+
+ writebuf = kmalloc(transfer_length, GFP_KERNEL);
+ if (writebuf == NULL)
+ return NULL;
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (urb == NULL) {
+ kfree(writebuf);
+ return NULL;
+ }
+
+ usb_fill_bulk_urb(urb, usblp->dev,
+ usb_sndbulkpipe(usblp->dev,
+ usblp->protocol[usblp->current_protocol].epwrite->bEndpointAddress),
+ writebuf, transfer_length, usblp_bulk_write, usblp);
+ urb->transfer_flags |= URB_FREE_BUFFER;
+
+ return urb;
+}
+
+static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
+{
+ struct usblp *usblp = file->private_data;
+ struct urb *writeurb;
+ int rv;
+ int transfer_length;
+ ssize_t writecount = 0;
+
+ if (mutex_lock_interruptible(&usblp->wmut)) {
+ rv = -EINTR;
+ goto raise_biglock;
+ }
+ if ((rv = usblp_wwait(usblp, !!(file->f_flags & O_NONBLOCK))) < 0)
+ goto raise_wait;
+
+ while (writecount < count) {
+ /*
+ * Step 1: Submit next block.
+ */
+ if ((transfer_length = count - writecount) > USBLP_BUF_SIZE)
+ transfer_length = USBLP_BUF_SIZE;
+
+ rv = -ENOMEM;
+ writeurb = usblp_new_writeurb(usblp, transfer_length);
+ if (writeurb == NULL)
+ goto raise_urb;
+ usb_anchor_urb(writeurb, &usblp->urbs);
+
+ if (copy_from_user(writeurb->transfer_buffer,
+ buffer + writecount, transfer_length)) {
+ rv = -EFAULT;
+ goto raise_badaddr;
+ }
+
+ spin_lock_irq(&usblp->lock);
+ usblp->wcomplete = 0;
+ spin_unlock_irq(&usblp->lock);
+ if ((rv = usb_submit_urb(writeurb, GFP_KERNEL)) < 0) {
+ usblp->wstatus = 0;
+ spin_lock_irq(&usblp->lock);
+ usblp->no_paper = 0;
+ usblp->wcomplete = 1;
+ wake_up(&usblp->wwait);
+ spin_unlock_irq(&usblp->lock);
+ if (rv != -ENOMEM)
+ rv = -EIO;
+ goto raise_submit;
+ }
+
+ /*
+ * Step 2: Wait for transfer to end, collect results.
+ */
+ rv = usblp_wwait(usblp, !!(file->f_flags&O_NONBLOCK));
+ if (rv < 0) {
+ if (rv == -EAGAIN) {
+ /* Presume that it's going to complete well. */
+ writecount += transfer_length;
+ }
+ if (rv == -ENOSPC) {
+ spin_lock_irq(&usblp->lock);
+ usblp->no_paper = 1; /* Mark for poll(2) */
+ spin_unlock_irq(&usblp->lock);
+ writecount += transfer_length;
+ }
+ /* Leave URB dangling, to be cleaned on close. */
+ goto collect_error;
+ }
+
+ if (usblp->wstatus < 0) {
+ rv = -EIO;
+ goto collect_error;
+ }
+ /*
+ * This is critical: it must be our URB, not other writer's.
+ * The wmut exists mainly to cover us here.
+ */
+ writecount += usblp->wstatus;
+ }
+
+ mutex_unlock(&usblp->wmut);
+ return writecount;
+
+raise_submit:
+raise_badaddr:
+ usb_unanchor_urb(writeurb);
+ usb_free_urb(writeurb);
+raise_urb:
+raise_wait:
+collect_error: /* Out of raise sequence */
+ mutex_unlock(&usblp->wmut);
+raise_biglock:
+ return writecount ? writecount : rv;
+}
+
+/*
+ * Notice that we fail to restart in a few cases: on EFAULT, on restart
+ * error, etc. This is the historical behaviour. In all such cases we return
+ * EIO, and applications loop in order to get the new read going.
+ */
+static ssize_t usblp_read(struct file *file, char __user *buffer, size_t len, loff_t *ppos)
+{
+ struct usblp *usblp = file->private_data;
+ ssize_t count;
+ ssize_t avail;
+ int rv;
+
+ if (!usblp->bidir)
+ return -EINVAL;
+
+ rv = usblp_rwait_and_lock(usblp, !!(file->f_flags & O_NONBLOCK));
+ if (rv < 0)
+ return rv;
+
+ if (!usblp->present) {
+ count = -ENODEV;
+ goto done;
+ }
+
+ if ((avail = usblp->rstatus) < 0) {
+ printk(KERN_ERR "usblp%d: error %d reading from printer\n",
+ usblp->minor, (int)avail);
+ usblp_submit_read(usblp);
+ count = -EIO;
+ goto done;
+ }
+
+ count = len < avail - usblp->readcount ? len : avail - usblp->readcount;
+ if (count != 0 &&
+ copy_to_user(buffer, usblp->readbuf + usblp->readcount, count)) {
+ count = -EFAULT;
+ goto done;
+ }
+
+ if ((usblp->readcount += count) == avail) {
+ if (usblp_submit_read(usblp) < 0) {
+ /* We don't want to leak USB return codes into errno. */
+ if (count == 0)
+ count = -EIO;
+ goto done;
+ }
+ }
+
+done:
+ mutex_unlock(&usblp->mut);
+ return count;
+}
+
+/*
+ * Wait for the write path to come idle.
+ * This is called under the ->wmut, so the idle path stays idle.
+ *
+ * Our write path has a peculiar property: it does not buffer like a tty,
+ * but waits for the write to succeed. This allows our ->release to bug out
+ * without waiting for writes to drain. But it obviously does not work
+ * when O_NONBLOCK is set. So, applications setting O_NONBLOCK must use
+ * select(2) or poll(2) to wait for the buffer to drain before closing.
+ * Alternatively, set blocking mode with fcntl and issue a zero-size write.
+ */
+static int usblp_wwait(struct usblp *usblp, int nonblock)
+{
+ DECLARE_WAITQUEUE(waita, current);
+ int rc;
+ int err = 0;
+
+ add_wait_queue(&usblp->wwait, &waita);
+ for (;;) {
+ if (mutex_lock_interruptible(&usblp->mut)) {
+ rc = -EINTR;
+ break;
+ }
+ set_current_state(TASK_INTERRUPTIBLE);
+ rc = usblp_wtest(usblp, nonblock);
+ mutex_unlock(&usblp->mut);
+ if (rc <= 0)
+ break;
+
+ if (schedule_timeout(msecs_to_jiffies(1500)) == 0) {
+ if (usblp->flags & LP_ABORT) {
+ err = usblp_check_status(usblp, err);
+ if (err == 1) { /* Paper out */
+ rc = -ENOSPC;
+ break;
+ }
+ } else {
+ /* Prod the printer, Gentoo#251237. */
+ mutex_lock(&usblp->mut);
+ usblp_read_status(usblp, usblp->statusbuf);
+ mutex_unlock(&usblp->mut);
+ }
+ }
+ }
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&usblp->wwait, &waita);
+ return rc;
+}
+
+static int usblp_wtest(struct usblp *usblp, int nonblock)
+{
+ unsigned long flags;
+
+ if (!usblp->present)
+ return -ENODEV;
+ if (signal_pending(current))
+ return -EINTR;
+ spin_lock_irqsave(&usblp->lock, flags);
+ if (usblp->wcomplete) {
+ spin_unlock_irqrestore(&usblp->lock, flags);
+ return 0;
+ }
+ spin_unlock_irqrestore(&usblp->lock, flags);
+ if (nonblock)
+ return -EAGAIN;
+ return 1;
+}
+
+/*
+ * Wait for read bytes to become available. This probably should have been
+ * called usblp_r_lock_and_wait(), because we lock first. But it's a traditional
+ * name for functions which lock and return.
+ *
+ * We do not use wait_event_interruptible because it makes locking iffy.
+ */
+static int usblp_rwait_and_lock(struct usblp *usblp, int nonblock)
+{
+ DECLARE_WAITQUEUE(waita, current);
+ int rc;
+
+ add_wait_queue(&usblp->rwait, &waita);
+ for (;;) {
+ if (mutex_lock_interruptible(&usblp->mut)) {
+ rc = -EINTR;
+ break;
+ }
+ set_current_state(TASK_INTERRUPTIBLE);
+ if ((rc = usblp_rtest(usblp, nonblock)) < 0) {
+ mutex_unlock(&usblp->mut);
+ break;
+ }
+ if (rc == 0) /* Keep it locked */
+ break;
+ mutex_unlock(&usblp->mut);
+ schedule();
+ }
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&usblp->rwait, &waita);
+ return rc;
+}
+
+static int usblp_rtest(struct usblp *usblp, int nonblock)
+{
+ unsigned long flags;
+
+ if (!usblp->present)
+ return -ENODEV;
+ if (signal_pending(current))
+ return -EINTR;
+ spin_lock_irqsave(&usblp->lock, flags);
+ if (usblp->rcomplete) {
+ spin_unlock_irqrestore(&usblp->lock, flags);
+ return 0;
+ }
+ spin_unlock_irqrestore(&usblp->lock, flags);
+ if (nonblock)
+ return -EAGAIN;
+ return 1;
+}
+
+/*
+ * Please check ->bidir and other such things outside for now.
+ */
+static int usblp_submit_read(struct usblp *usblp)
+{
+ struct urb *urb;
+ unsigned long flags;
+ int rc;
+
+ rc = -ENOMEM;
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (urb == NULL)
+ goto raise_urb;
+
+ usb_fill_bulk_urb(urb, usblp->dev,
+ usb_rcvbulkpipe(usblp->dev,
+ usblp->protocol[usblp->current_protocol].epread->bEndpointAddress),
+ usblp->readbuf, USBLP_BUF_SIZE_IN,
+ usblp_bulk_read, usblp);
+ usb_anchor_urb(urb, &usblp->urbs);
+
+ spin_lock_irqsave(&usblp->lock, flags);
+ usblp->readcount = 0; /* XXX Why here? */
+ usblp->rcomplete = 0;
+ spin_unlock_irqrestore(&usblp->lock, flags);
+ if ((rc = usb_submit_urb(urb, GFP_KERNEL)) < 0) {
+ dev_dbg(&usblp->intf->dev, "error submitting urb (%d)\n", rc);
+ spin_lock_irqsave(&usblp->lock, flags);
+ usblp->rstatus = rc;
+ usblp->rcomplete = 1;
+ spin_unlock_irqrestore(&usblp->lock, flags);
+ goto raise_submit;
+ }
+
+ return 0;
+
+raise_submit:
+ usb_unanchor_urb(urb);
+ usb_free_urb(urb);
+raise_urb:
+ return rc;
+}
+
+/*
+ * Checks for printers that have quirks, such as requiring unidirectional
+ * communication but reporting bidirectional; currently some HP printers
+ * have this flaw (HP 810, 880, 895, etc.), or needing an init string
+ * sent at each open (like some Epsons).
+ * Returns 1 if found, 0 if not found.
+ *
+ * HP recommended that we use the bidirectional interface but
+ * don't attempt any bulk IN transfers from the IN endpoint.
+ * Here's some more detail on the problem:
+ * The problem is not that it isn't bidirectional though. The problem
+ * is that if you request a device ID, or status information, while
+ * the buffers are full, the return data will end up in the print data
+ * buffer. For example if you make sure you never request the device ID
+ * while you are sending print data, and you don't try to query the
+ * printer status every couple of milliseconds, you will probably be OK.
+ */
+static unsigned int usblp_quirks(__u16 vendor, __u16 product)
+{
+ int i;
+
+ for (i = 0; quirk_printers[i].vendorId; i++) {
+ if (vendor == quirk_printers[i].vendorId &&
+ product == quirk_printers[i].productId)
+ return quirk_printers[i].quirks;
+ }
+ return 0;
+}
+
+static const struct file_operations usblp_fops = {
+ .owner = THIS_MODULE,
+ .read = usblp_read,
+ .write = usblp_write,
+ .poll = usblp_poll,
+ .unlocked_ioctl = usblp_ioctl,
+ .compat_ioctl = usblp_ioctl,
+ .open = usblp_open,
+ .release = usblp_release,
+ .llseek = noop_llseek,
+};
+
+static char *usblp_devnode(struct device *dev, umode_t *mode)
+{
+ return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
+}
+
+static struct usb_class_driver usblp_class = {
+ .name = "lp%d",
+ .devnode = usblp_devnode,
+ .fops = &usblp_fops,
+ .minor_base = USBLP_MINOR_BASE,
+};
+
+static ssize_t ieee1284_id_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct usb_interface *intf = to_usb_interface(dev);
+ struct usblp *usblp = usb_get_intfdata(intf);
+
+ if (usblp->device_id_string[0] == 0 &&
+ usblp->device_id_string[1] == 0)
+ return 0;
+
+ return sprintf(buf, "%s", usblp->device_id_string+2);
+}
+
+static DEVICE_ATTR_RO(ieee1284_id);
+
+static struct attribute *usblp_attrs[] = {
+ &dev_attr_ieee1284_id.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(usblp);
+
+static int usblp_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct usblp *usblp;
+ int protocol;
+ int retval;
+
+ /* Malloc and start initializing usblp structure so we can use it
+ * directly. */
+ usblp = kzalloc(sizeof(struct usblp), GFP_KERNEL);
+ if (!usblp) {
+ retval = -ENOMEM;
+ goto abort_ret;
+ }
+ usblp->dev = dev;
+ mutex_init(&usblp->wmut);
+ mutex_init(&usblp->mut);
+ spin_lock_init(&usblp->lock);
+ init_waitqueue_head(&usblp->rwait);
+ init_waitqueue_head(&usblp->wwait);
+ init_usb_anchor(&usblp->urbs);
+ usblp->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
+ usblp->intf = usb_get_intf(intf);
+
+ /* Malloc device ID string buffer to the largest expected length,
+ * since we can re-query it on an ioctl and a dynamic string
+ * could change in length. */
+ if (!(usblp->device_id_string = kmalloc(USBLP_DEVICE_ID_SIZE, GFP_KERNEL))) {
+ retval = -ENOMEM;
+ goto abort;
+ }
+
+ /*
+ * Allocate read buffer. We somewhat wastefully
+ * malloc both regardless of bidirectionality, because the
+ * alternate setting can be changed later via an ioctl.
+ */
+ if (!(usblp->readbuf = kmalloc(USBLP_BUF_SIZE_IN, GFP_KERNEL))) {
+ retval = -ENOMEM;
+ goto abort;
+ }
+
+ /* Allocate buffer for printer status */
+ usblp->statusbuf = kmalloc(STATUS_BUF_SIZE, GFP_KERNEL);
+ if (!usblp->statusbuf) {
+ retval = -ENOMEM;
+ goto abort;
+ }
+
+ /* Lookup quirks for this printer. */
+ usblp->quirks = usblp_quirks(
+ le16_to_cpu(dev->descriptor.idVendor),
+ le16_to_cpu(dev->descriptor.idProduct));
+
+ /* Analyze and pick initial alternate settings and endpoints. */
+ protocol = usblp_select_alts(usblp);
+ if (protocol < 0) {
+ dev_dbg(&intf->dev,
+ "incompatible printer-class device 0x%4.4X/0x%4.4X\n",
+ le16_to_cpu(dev->descriptor.idVendor),
+ le16_to_cpu(dev->descriptor.idProduct));
+ retval = -ENODEV;
+ goto abort;
+ }
+
+ /* Setup the selected alternate setting and endpoints. */
+ if (usblp_set_protocol(usblp, protocol) < 0) {
+ retval = -ENODEV; /* ->probe isn't ->ioctl */
+ goto abort;
+ }
+
+ /* Retrieve and store the device ID string. */
+ usblp_cache_device_id_string(usblp);
+
+#ifdef DEBUG
+ usblp_check_status(usblp, 0);
+#endif
+
+ usb_set_intfdata(intf, usblp);
+
+ usblp->present = 1;
+
+ retval = usb_register_dev(intf, &usblp_class);
+ if (retval) {
+ dev_err(&intf->dev,
+ "usblp: Not able to get a minor (base %u, slice default): %d\n",
+ USBLP_MINOR_BASE, retval);
+ goto abort_intfdata;
+ }
+ usblp->minor = intf->minor;
+ dev_info(&intf->dev,
+ "usblp%d: USB %sdirectional printer dev %d if %d alt %d proto %d vid 0x%4.4X pid 0x%4.4X\n",
+ usblp->minor, usblp->bidir ? "Bi" : "Uni", dev->devnum,
+ usblp->ifnum,
+ usblp->protocol[usblp->current_protocol].alt_setting,
+ usblp->current_protocol,
+ le16_to_cpu(usblp->dev->descriptor.idVendor),
+ le16_to_cpu(usblp->dev->descriptor.idProduct));
+
+ return 0;
+
+abort_intfdata:
+ usb_set_intfdata(intf, NULL);
+abort:
+ kfree(usblp->readbuf);
+ kfree(usblp->statusbuf);
+ kfree(usblp->device_id_string);
+ usb_put_intf(usblp->intf);
+ kfree(usblp);
+abort_ret:
+ return retval;
+}
+
+/*
+ * We are a "new" style driver with usb_device_id table,
+ * but our requirements are too intricate for simple match to handle.
+ *
+ * The "proto_bias" option may be used to specify the preferred protocol
+ * for all USB printers (1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2,
+ * 3=USB_CLASS_PRINTER/1/3). If the device supports the preferred protocol,
+ * then we bind to it.
+ *
+ * The best interface for us is USB_CLASS_PRINTER/1/2, because it
+ * is compatible with a stream of characters. If we find it, we bind to it.
+ *
+ * Note that the people from hpoj.sourceforge.net need to be able to
+ * bind to USB_CLASS_PRINTER/1/3 (MLC/1284.4), so we provide them ioctls
+ * for this purpose.
+ *
+ * Failing USB_CLASS_PRINTER/1/2, we look for USB_CLASS_PRINTER/1/3,
+ * even though it's probably not stream-compatible, because this matches
+ * the behaviour of the old code.
+ *
+ * If nothing else, we bind to USB_CLASS_PRINTER/1/1
+ * - the unidirectional interface.
+ */
+static int usblp_select_alts(struct usblp *usblp)
+{
+ struct usb_interface *if_alt;
+ struct usb_host_interface *ifd;
+ struct usb_endpoint_descriptor *epwrite, *epread;
+ int p, i;
+ int res;
+
+ if_alt = usblp->intf;
+
+ for (p = 0; p < USBLP_MAX_PROTOCOLS; p++)
+ usblp->protocol[p].alt_setting = -1;
+
+ /* Find out what we have. */
+ for (i = 0; i < if_alt->num_altsetting; i++) {
+ ifd = &if_alt->altsetting[i];
+
+ if (ifd->desc.bInterfaceClass != USB_CLASS_PRINTER ||
+ ifd->desc.bInterfaceSubClass != 1)
+ if (!(usblp->quirks & USBLP_QUIRK_BAD_CLASS))
+ continue;
+
+ if (ifd->desc.bInterfaceProtocol < USBLP_FIRST_PROTOCOL ||
+ ifd->desc.bInterfaceProtocol > USBLP_LAST_PROTOCOL)
+ continue;
+
+ /* Look for the expected bulk endpoints. */
+ if (ifd->desc.bInterfaceProtocol > 1) {
+ res = usb_find_common_endpoints(ifd,
+ &epread, &epwrite, NULL, NULL);
+ } else {
+ epread = NULL;
+ res = usb_find_bulk_out_endpoint(ifd, &epwrite);
+ }
+
+ /* Ignore buggy hardware without the right endpoints. */
+ if (res)
+ continue;
+
+ /* Turn off reads for buggy bidirectional printers. */
+ if (usblp->quirks & USBLP_QUIRK_BIDIR) {
+ printk(KERN_INFO "usblp%d: Disabling reads from "
+ "problematic bidirectional printer\n",
+ usblp->minor);
+ epread = NULL;
+ }
+
+ usblp->protocol[ifd->desc.bInterfaceProtocol].alt_setting =
+ ifd->desc.bAlternateSetting;
+ usblp->protocol[ifd->desc.bInterfaceProtocol].epwrite = epwrite;
+ usblp->protocol[ifd->desc.bInterfaceProtocol].epread = epread;
+ }
+
+ /* If our requested protocol is supported, then use it. */
+ if (proto_bias >= USBLP_FIRST_PROTOCOL &&
+ proto_bias <= USBLP_LAST_PROTOCOL &&
+ usblp->protocol[proto_bias].alt_setting != -1)
+ return proto_bias;
+
+ /* Ordering is important here. */
+ if (usblp->protocol[2].alt_setting != -1)
+ return 2;
+ if (usblp->protocol[1].alt_setting != -1)
+ return 1;
+ if (usblp->protocol[3].alt_setting != -1)
+ return 3;
+
+ /* If nothing is available, then don't bind to this device. */
+ return -1;
+}
+
+static int usblp_set_protocol(struct usblp *usblp, int protocol)
+{
+ int r, alts;
+
+ if (protocol < USBLP_FIRST_PROTOCOL || protocol > USBLP_LAST_PROTOCOL)
+ return -EINVAL;
+
+ /* Don't unnecessarily set the interface if there's a single alt. */
+ if (usblp->intf->num_altsetting > 1) {
+ alts = usblp->protocol[protocol].alt_setting;
+ if (alts < 0)
+ return -EINVAL;
+ r = usb_set_interface(usblp->dev, usblp->ifnum, alts);
+ if (r < 0) {
+ printk(KERN_ERR "usblp: can't set desired altsetting %d on interface %d\n",
+ alts, usblp->ifnum);
+ return r;
+ }
+ }
+
+ usblp->bidir = (usblp->protocol[protocol].epread != NULL);
+ usblp->current_protocol = protocol;
+ dev_dbg(&usblp->intf->dev, "usblp%d set protocol %d\n",
+ usblp->minor, protocol);
+ return 0;
+}
+
+/* Retrieves and caches device ID string.
+ * Returns length, including length bytes but not null terminator.
+ * On error, returns a negative errno value. */
+static int usblp_cache_device_id_string(struct usblp *usblp)
+{
+ int err, length;
+
+ err = usblp_get_id(usblp, 0, usblp->device_id_string, USBLP_DEVICE_ID_SIZE - 1);
+ if (err < 0) {
+ dev_dbg(&usblp->intf->dev,
+ "usblp%d: error = %d reading IEEE-1284 Device ID string\n",
+ usblp->minor, err);
+ usblp->device_id_string[0] = usblp->device_id_string[1] = '\0';
+ return -EIO;
+ }
+
+ /* First two bytes are length in big-endian.
+ * They count themselves, and we copy them into
+ * the user's buffer. */
+ length = be16_to_cpu(*((__be16 *)usblp->device_id_string));
+ if (length < 2)
+ length = 2;
+ else if (length >= USBLP_DEVICE_ID_SIZE)
+ length = USBLP_DEVICE_ID_SIZE - 1;
+ usblp->device_id_string[length] = '\0';
+
+ dev_dbg(&usblp->intf->dev, "usblp%d Device ID string [len=%d]=\"%s\"\n",
+ usblp->minor, length, &usblp->device_id_string[2]);
+
+ return length;
+}
+
+static void usblp_disconnect(struct usb_interface *intf)
+{
+ struct usblp *usblp = usb_get_intfdata(intf);
+
+ usb_deregister_dev(intf, &usblp_class);
+
+ if (!usblp || !usblp->dev) {
+ dev_err(&intf->dev, "bogus disconnect\n");
+ BUG();
+ }
+
+ mutex_lock(&usblp_mutex);
+ mutex_lock(&usblp->mut);
+ usblp->present = 0;
+ wake_up(&usblp->wwait);
+ wake_up(&usblp->rwait);
+ usb_set_intfdata(intf, NULL);
+
+ usblp_unlink_urbs(usblp);
+ mutex_unlock(&usblp->mut);
+ usb_poison_anchored_urbs(&usblp->urbs);
+
+ if (!usblp->used)
+ usblp_cleanup(usblp);
+
+ mutex_unlock(&usblp_mutex);
+}
+
+static int usblp_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct usblp *usblp = usb_get_intfdata(intf);
+
+ usblp_unlink_urbs(usblp);
+#if 0 /* XXX Do we want this? What if someone is reading, should we fail? */
+ /* not strictly necessary, but just in case */
+ wake_up(&usblp->wwait);
+ wake_up(&usblp->rwait);
+#endif
+
+ return 0;
+}
+
+static int usblp_resume(struct usb_interface *intf)
+{
+ struct usblp *usblp = usb_get_intfdata(intf);
+ int r;
+
+ r = handle_bidir(usblp);
+
+ return r;
+}
+
+static const struct usb_device_id usblp_ids[] = {
+ { USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 1) },
+ { USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 2) },
+ { USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 3) },
+ { USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 1) },
+ { USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 2) },
+ { USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 3) },
+ { USB_DEVICE(0x04b8, 0x0202) }, /* Seiko Epson Receipt Printer M129C */
+ { } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, usblp_ids);
+
+static struct usb_driver usblp_driver = {
+ .name = "usblp",
+ .probe = usblp_probe,
+ .disconnect = usblp_disconnect,
+ .suspend = usblp_suspend,
+ .resume = usblp_resume,
+ .id_table = usblp_ids,
+ .dev_groups = usblp_groups,
+ .supports_autosuspend = 1,
+};
+
+module_usb_driver(usblp_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+module_param(proto_bias, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(proto_bias, "Favourite protocol number");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
new file mode 100644
index 000000000..311007b1d
--- /dev/null
+++ b/drivers/usb/class/usbtmc.c
@@ -0,0 +1,2595 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * drivers/usb/class/usbtmc.c - USB Test & Measurement class driver
+ *
+ * Copyright (C) 2007 Stefan Kopp, Gechingen, Germany
+ * Copyright (C) 2008 Novell, Inc.
+ * Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de>
+ * Copyright (C) 2018 IVI Foundation, Inc.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+#include <linux/kref.h>
+#include <linux/slab.h>
+#include <linux/poll.h>
+#include <linux/mutex.h>
+#include <linux/usb.h>
+#include <linux/compat.h>
+#include <linux/usb/tmc.h>
+
+/* Increment API VERSION when changing tmc.h with new flags or ioctls
+ * or when changing a significant behavior of the driver.
+ */
+#define USBTMC_API_VERSION (3)
+
+#define USBTMC_HEADER_SIZE 12
+#define USBTMC_MINOR_BASE 176
+
+/* Minimum USB timeout (in milliseconds) */
+#define USBTMC_MIN_TIMEOUT 100
+/* Default USB timeout (in milliseconds) */
+#define USBTMC_TIMEOUT 5000
+
+/* Max number of urbs used in write transfers */
+#define MAX_URBS_IN_FLIGHT 16
+/* I/O buffer size used in generic read/write functions */
+#define USBTMC_BUFSIZE (4096)
+
+/*
+ * Maximum number of read cycles to empty bulk in endpoint during CLEAR and
+ * ABORT_BULK_IN requests. Ends the loop if (for whatever reason) a short
+ * packet is never read.
+ */
+#define USBTMC_MAX_READS_TO_CLEAR_BULK_IN 100
+
+static const struct usb_device_id usbtmc_devices[] = {
+ { USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 0), },
+ { USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 1), },
+ { 0, } /* terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, usbtmc_devices);
+
+/*
+ * This structure is the capabilities for the device
+ * See section 4.2.1.8 of the USBTMC specification,
+ * and section 4.2.2 of the USBTMC usb488 subclass
+ * specification for details.
+ */
+struct usbtmc_dev_capabilities {
+ __u8 interface_capabilities;
+ __u8 device_capabilities;
+ __u8 usb488_interface_capabilities;
+ __u8 usb488_device_capabilities;
+};
+
+/* This structure holds private data for each USBTMC device. One copy is
+ * allocated for each USBTMC device in the driver's probe function.
+ */
+struct usbtmc_device_data {
+ const struct usb_device_id *id;
+ struct usb_device *usb_dev;
+ struct usb_interface *intf;
+ struct list_head file_list;
+
+ unsigned int bulk_in;
+ unsigned int bulk_out;
+
+ u8 bTag;
+ u8 bTag_last_write; /* needed for abort */
+ u8 bTag_last_read; /* needed for abort */
+
+ /* packet size of IN bulk */
+ u16 wMaxPacketSize;
+
+ /* data for interrupt in endpoint handling */
+ u8 bNotify1;
+ u8 bNotify2;
+ u16 ifnum;
+ u8 iin_bTag;
+ u8 *iin_buffer;
+ atomic_t iin_data_valid;
+ unsigned int iin_ep;
+ int iin_ep_present;
+ int iin_interval;
+ struct urb *iin_urb;
+ u16 iin_wMaxPacketSize;
+
+ /* coalesced usb488_caps from usbtmc_dev_capabilities */
+ __u8 usb488_caps;
+
+ bool zombie; /* fd of disconnected device */
+
+ struct usbtmc_dev_capabilities capabilities;
+ struct kref kref;
+ struct mutex io_mutex; /* only one i/o function running at a time */
+ wait_queue_head_t waitq;
+ struct fasync_struct *fasync;
+ spinlock_t dev_lock; /* lock for file_list */
+};
+#define to_usbtmc_data(d) container_of(d, struct usbtmc_device_data, kref)
+
+/*
+ * This structure holds private data for each USBTMC file handle.
+ */
+struct usbtmc_file_data {
+ struct usbtmc_device_data *data;
+ struct list_head file_elem;
+
+ u32 timeout;
+ u8 srq_byte;
+ atomic_t srq_asserted;
+ atomic_t closing;
+ u8 bmTransferAttributes; /* member of DEV_DEP_MSG_IN */
+
+ u8 eom_val;
+ u8 term_char;
+ bool term_char_enabled;
+ bool auto_abort;
+
+ spinlock_t err_lock; /* lock for errors */
+
+ struct usb_anchor submitted;
+
+ /* data for generic_write */
+ struct semaphore limit_write_sem;
+ u32 out_transfer_size;
+ int out_status;
+
+ /* data for generic_read */
+ u32 in_transfer_size;
+ int in_status;
+ int in_urbs_used;
+ struct usb_anchor in_anchor;
+ wait_queue_head_t wait_bulk_in;
+};
+
+/* Forward declarations */
+static struct usb_driver usbtmc_driver;
+static void usbtmc_draw_down(struct usbtmc_file_data *file_data);
+
+static void usbtmc_delete(struct kref *kref)
+{
+ struct usbtmc_device_data *data = to_usbtmc_data(kref);
+
+ usb_put_dev(data->usb_dev);
+ kfree(data);
+}
+
+static int usbtmc_open(struct inode *inode, struct file *filp)
+{
+ struct usb_interface *intf;
+ struct usbtmc_device_data *data;
+ struct usbtmc_file_data *file_data;
+
+ intf = usb_find_interface(&usbtmc_driver, iminor(inode));
+ if (!intf) {
+ pr_err("can not find device for minor %d", iminor(inode));
+ return -ENODEV;
+ }
+
+ file_data = kzalloc(sizeof(*file_data), GFP_KERNEL);
+ if (!file_data)
+ return -ENOMEM;
+
+ spin_lock_init(&file_data->err_lock);
+ sema_init(&file_data->limit_write_sem, MAX_URBS_IN_FLIGHT);
+ init_usb_anchor(&file_data->submitted);
+ init_usb_anchor(&file_data->in_anchor);
+ init_waitqueue_head(&file_data->wait_bulk_in);
+
+ data = usb_get_intfdata(intf);
+ /* Protect reference to data from file structure until release */
+ kref_get(&data->kref);
+
+ mutex_lock(&data->io_mutex);
+ file_data->data = data;
+
+ atomic_set(&file_data->closing, 0);
+
+ file_data->timeout = USBTMC_TIMEOUT;
+ file_data->term_char = '\n';
+ file_data->term_char_enabled = 0;
+ file_data->auto_abort = 0;
+ file_data->eom_val = 1;
+
+ INIT_LIST_HEAD(&file_data->file_elem);
+ spin_lock_irq(&data->dev_lock);
+ list_add_tail(&file_data->file_elem, &data->file_list);
+ spin_unlock_irq(&data->dev_lock);
+ mutex_unlock(&data->io_mutex);
+
+ /* Store pointer in file structure's private data field */
+ filp->private_data = file_data;
+
+ return 0;
+}
+
+/*
+ * usbtmc_flush - called before file handle is closed
+ */
+static int usbtmc_flush(struct file *file, fl_owner_t id)
+{
+ struct usbtmc_file_data *file_data;
+ struct usbtmc_device_data *data;
+
+ file_data = file->private_data;
+ if (file_data == NULL)
+ return -ENODEV;
+
+ atomic_set(&file_data->closing, 1);
+ data = file_data->data;
+
+ /* wait for io to stop */
+ mutex_lock(&data->io_mutex);
+
+ usbtmc_draw_down(file_data);
+
+ spin_lock_irq(&file_data->err_lock);
+ file_data->in_status = 0;
+ file_data->in_transfer_size = 0;
+ file_data->in_urbs_used = 0;
+ file_data->out_status = 0;
+ file_data->out_transfer_size = 0;
+ spin_unlock_irq(&file_data->err_lock);
+
+ wake_up_interruptible_all(&data->waitq);
+ mutex_unlock(&data->io_mutex);
+
+ return 0;
+}
+
+static int usbtmc_release(struct inode *inode, struct file *file)
+{
+ struct usbtmc_file_data *file_data = file->private_data;
+
+ /* prevent IO _AND_ usbtmc_interrupt */
+ mutex_lock(&file_data->data->io_mutex);
+ spin_lock_irq(&file_data->data->dev_lock);
+
+ list_del(&file_data->file_elem);
+
+ spin_unlock_irq(&file_data->data->dev_lock);
+ mutex_unlock(&file_data->data->io_mutex);
+
+ kref_put(&file_data->data->kref, usbtmc_delete);
+ file_data->data = NULL;
+ kfree(file_data);
+ return 0;
+}
+
+static int usbtmc_ioctl_abort_bulk_in_tag(struct usbtmc_device_data *data,
+ u8 tag)
+{
+ u8 *buffer;
+ struct device *dev;
+ int rv;
+ int n;
+ int actual;
+
+ dev = &data->intf->dev;
+ buffer = kmalloc(USBTMC_BUFSIZE, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ rv = usb_control_msg(data->usb_dev,
+ usb_rcvctrlpipe(data->usb_dev, 0),
+ USBTMC_REQUEST_INITIATE_ABORT_BULK_IN,
+ USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT,
+ tag, data->bulk_in,
+ buffer, 2, USB_CTRL_GET_TIMEOUT);
+
+ if (rv < 0) {
+ dev_err(dev, "usb_control_msg returned %d\n", rv);
+ goto exit;
+ }
+
+ dev_dbg(dev, "INITIATE_ABORT_BULK_IN returned %x with tag %02x\n",
+ buffer[0], buffer[1]);
+
+ if (buffer[0] == USBTMC_STATUS_FAILED) {
+ /* No transfer in progress and the Bulk-OUT FIFO is empty. */
+ rv = 0;
+ goto exit;
+ }
+
+ if (buffer[0] == USBTMC_STATUS_TRANSFER_NOT_IN_PROGRESS) {
+ /* The device returns this status if either:
+ * - There is a transfer in progress, but the specified bTag
+ * does not match.
+ * - There is no transfer in progress, but the Bulk-OUT FIFO
+ * is not empty.
+ */
+ rv = -ENOMSG;
+ goto exit;
+ }
+
+ if (buffer[0] != USBTMC_STATUS_SUCCESS) {
+ dev_err(dev, "INITIATE_ABORT_BULK_IN returned %x\n",
+ buffer[0]);
+ rv = -EPERM;
+ goto exit;
+ }
+
+ n = 0;
+
+usbtmc_abort_bulk_in_status:
+ dev_dbg(dev, "Reading from bulk in EP\n");
+
+ /* Data must be present. So use low timeout 300 ms */
+ actual = 0;
+ rv = usb_bulk_msg(data->usb_dev,
+ usb_rcvbulkpipe(data->usb_dev,
+ data->bulk_in),
+ buffer, USBTMC_BUFSIZE,
+ &actual, 300);
+
+ print_hex_dump_debug("usbtmc ", DUMP_PREFIX_NONE, 16, 1,
+ buffer, actual, true);
+
+ n++;
+
+ if (rv < 0) {
+ dev_err(dev, "usb_bulk_msg returned %d\n", rv);
+ if (rv != -ETIMEDOUT)
+ goto exit;
+ }
+
+ if (actual == USBTMC_BUFSIZE)
+ goto usbtmc_abort_bulk_in_status;
+
+ if (n >= USBTMC_MAX_READS_TO_CLEAR_BULK_IN) {
+ dev_err(dev, "Couldn't clear device buffer within %d cycles\n",
+ USBTMC_MAX_READS_TO_CLEAR_BULK_IN);
+ rv = -EPERM;
+ goto exit;
+ }
+
+ rv = usb_control_msg(data->usb_dev,
+ usb_rcvctrlpipe(data->usb_dev, 0),
+ USBTMC_REQUEST_CHECK_ABORT_BULK_IN_STATUS,
+ USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT,
+ 0, data->bulk_in, buffer, 0x08,
+ USB_CTRL_GET_TIMEOUT);
+
+ if (rv < 0) {
+ dev_err(dev, "usb_control_msg returned %d\n", rv);
+ goto exit;
+ }
+
+ dev_dbg(dev, "CHECK_ABORT_BULK_IN returned %x\n", buffer[0]);
+
+ if (buffer[0] == USBTMC_STATUS_SUCCESS) {
+ rv = 0;
+ goto exit;
+ }
+
+ if (buffer[0] != USBTMC_STATUS_PENDING) {
+ dev_err(dev, "CHECK_ABORT_BULK_IN returned %x\n", buffer[0]);
+ rv = -EPERM;
+ goto exit;
+ }
+
+ if ((buffer[1] & 1) > 0) {
+ /* The device has 1 or more queued packets the Host can read */
+ goto usbtmc_abort_bulk_in_status;
+ }
+
+ /* The Host must send CHECK_ABORT_BULK_IN_STATUS at a later time. */
+ rv = -EAGAIN;
+exit:
+ kfree(buffer);
+ return rv;
+}
+
+static int usbtmc_ioctl_abort_bulk_in(struct usbtmc_device_data *data)
+{
+ return usbtmc_ioctl_abort_bulk_in_tag(data, data->bTag_last_read);
+}
+
+static int usbtmc_ioctl_abort_bulk_out_tag(struct usbtmc_device_data *data,
+ u8 tag)
+{
+ struct device *dev;
+ u8 *buffer;
+ int rv;
+ int n;
+
+ dev = &data->intf->dev;
+
+ buffer = kmalloc(8, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ rv = usb_control_msg(data->usb_dev,
+ usb_rcvctrlpipe(data->usb_dev, 0),
+ USBTMC_REQUEST_INITIATE_ABORT_BULK_OUT,
+ USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT,
+ tag, data->bulk_out,
+ buffer, 2, USB_CTRL_GET_TIMEOUT);
+
+ if (rv < 0) {
+ dev_err(dev, "usb_control_msg returned %d\n", rv);
+ goto exit;
+ }
+
+ dev_dbg(dev, "INITIATE_ABORT_BULK_OUT returned %x\n", buffer[0]);
+
+ if (buffer[0] != USBTMC_STATUS_SUCCESS) {
+ dev_err(dev, "INITIATE_ABORT_BULK_OUT returned %x\n",
+ buffer[0]);
+ rv = -EPERM;
+ goto exit;
+ }
+
+ n = 0;
+
+usbtmc_abort_bulk_out_check_status:
+ /* do not stress device with subsequent requests */
+ msleep(50);
+ rv = usb_control_msg(data->usb_dev,
+ usb_rcvctrlpipe(data->usb_dev, 0),
+ USBTMC_REQUEST_CHECK_ABORT_BULK_OUT_STATUS,
+ USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT,
+ 0, data->bulk_out, buffer, 0x08,
+ USB_CTRL_GET_TIMEOUT);
+ n++;
+ if (rv < 0) {
+ dev_err(dev, "usb_control_msg returned %d\n", rv);
+ goto exit;
+ }
+
+ dev_dbg(dev, "CHECK_ABORT_BULK_OUT returned %x\n", buffer[0]);
+
+ if (buffer[0] == USBTMC_STATUS_SUCCESS)
+ goto usbtmc_abort_bulk_out_clear_halt;
+
+ if ((buffer[0] == USBTMC_STATUS_PENDING) &&
+ (n < USBTMC_MAX_READS_TO_CLEAR_BULK_IN))
+ goto usbtmc_abort_bulk_out_check_status;
+
+ rv = -EPERM;
+ goto exit;
+
+usbtmc_abort_bulk_out_clear_halt:
+ rv = usb_clear_halt(data->usb_dev,
+ usb_sndbulkpipe(data->usb_dev, data->bulk_out));
+
+ if (rv < 0) {
+ dev_err(dev, "usb_control_msg returned %d\n", rv);
+ goto exit;
+ }
+ rv = 0;
+
+exit:
+ kfree(buffer);
+ return rv;
+}
+
+static int usbtmc_ioctl_abort_bulk_out(struct usbtmc_device_data *data)
+{
+ return usbtmc_ioctl_abort_bulk_out_tag(data, data->bTag_last_write);
+}
+
+static int usbtmc_get_stb(struct usbtmc_file_data *file_data, __u8 *stb)
+{
+ struct usbtmc_device_data *data = file_data->data;
+ struct device *dev = &data->intf->dev;
+ u8 *buffer;
+ u8 tag;
+ int rv;
+
+ dev_dbg(dev, "Enter ioctl_read_stb iin_ep_present: %d\n",
+ data->iin_ep_present);
+
+ buffer = kmalloc(8, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ atomic_set(&data->iin_data_valid, 0);
+
+ rv = usb_control_msg(data->usb_dev,
+ usb_rcvctrlpipe(data->usb_dev, 0),
+ USBTMC488_REQUEST_READ_STATUS_BYTE,
+ USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ data->iin_bTag,
+ data->ifnum,
+ buffer, 0x03, USB_CTRL_GET_TIMEOUT);
+ if (rv < 0) {
+ dev_err(dev, "stb usb_control_msg returned %d\n", rv);
+ goto exit;
+ }
+
+ if (buffer[0] != USBTMC_STATUS_SUCCESS) {
+ dev_err(dev, "control status returned %x\n", buffer[0]);
+ rv = -EIO;
+ goto exit;
+ }
+
+ if (data->iin_ep_present) {
+ rv = wait_event_interruptible_timeout(
+ data->waitq,
+ atomic_read(&data->iin_data_valid) != 0,
+ file_data->timeout);
+ if (rv < 0) {
+ dev_dbg(dev, "wait interrupted %d\n", rv);
+ goto exit;
+ }
+
+ if (rv == 0) {
+ dev_dbg(dev, "wait timed out\n");
+ rv = -ETIMEDOUT;
+ goto exit;
+ }
+
+ tag = data->bNotify1 & 0x7f;
+ if (tag != data->iin_bTag) {
+ dev_err(dev, "expected bTag %x got %x\n",
+ data->iin_bTag, tag);
+ }
+
+ *stb = data->bNotify2;
+ } else {
+ *stb = buffer[2];
+ }
+
+ dev_dbg(dev, "stb:0x%02x received %d\n", (unsigned int)*stb, rv);
+
+ exit:
+ /* bump interrupt bTag */
+ data->iin_bTag += 1;
+ if (data->iin_bTag > 127)
+ /* 1 is for SRQ see USBTMC-USB488 subclass spec section 4.3.1 */
+ data->iin_bTag = 2;
+
+ kfree(buffer);
+ return rv;
+}
+
+static int usbtmc488_ioctl_read_stb(struct usbtmc_file_data *file_data,
+ void __user *arg)
+{
+ int srq_asserted = 0;
+ __u8 stb;
+ int rv;
+
+ rv = usbtmc_get_stb(file_data, &stb);
+
+ if (rv > 0) {
+ srq_asserted = atomic_xchg(&file_data->srq_asserted,
+ srq_asserted);
+ if (srq_asserted)
+ stb |= 0x40; /* Set RQS bit */
+
+ rv = put_user(stb, (__u8 __user *)arg);
+ }
+ return rv;
+
+}
+
+static int usbtmc_ioctl_get_srq_stb(struct usbtmc_file_data *file_data,
+ void __user *arg)
+{
+ struct usbtmc_device_data *data = file_data->data;
+ struct device *dev = &data->intf->dev;
+ int srq_asserted = 0;
+ __u8 stb = 0;
+ int rv;
+
+ spin_lock_irq(&data->dev_lock);
+ srq_asserted = atomic_xchg(&file_data->srq_asserted, srq_asserted);
+
+ if (srq_asserted) {
+ stb = file_data->srq_byte;
+ spin_unlock_irq(&data->dev_lock);
+ rv = put_user(stb, (__u8 __user *)arg);
+ } else {
+ spin_unlock_irq(&data->dev_lock);
+ rv = -ENOMSG;
+ }
+
+ dev_dbg(dev, "stb:0x%02x with srq received %d\n", (unsigned int)stb, rv);
+
+ return rv;
+}
+
+static int usbtmc488_ioctl_wait_srq(struct usbtmc_file_data *file_data,
+ __u32 __user *arg)
+{
+ struct usbtmc_device_data *data = file_data->data;
+ struct device *dev = &data->intf->dev;
+ int rv;
+ u32 timeout;
+ unsigned long expire;
+
+ if (!data->iin_ep_present) {
+ dev_dbg(dev, "no interrupt endpoint present\n");
+ return -EFAULT;
+ }
+
+ if (get_user(timeout, arg))
+ return -EFAULT;
+
+ expire = msecs_to_jiffies(timeout);
+
+ mutex_unlock(&data->io_mutex);
+
+ rv = wait_event_interruptible_timeout(
+ data->waitq,
+ atomic_read(&file_data->srq_asserted) != 0 ||
+ atomic_read(&file_data->closing),
+ expire);
+
+ mutex_lock(&data->io_mutex);
+
+ /* Note! disconnect or close could be called in the meantime */
+ if (atomic_read(&file_data->closing) || data->zombie)
+ rv = -ENODEV;
+
+ if (rv < 0) {
+ /* dev can be invalid now! */
+ pr_debug("%s - wait interrupted %d\n", __func__, rv);
+ return rv;
+ }
+
+ if (rv == 0) {
+ dev_dbg(dev, "%s - wait timed out\n", __func__);
+ return -ETIMEDOUT;
+ }
+
+ dev_dbg(dev, "%s - srq asserted\n", __func__);
+ return 0;
+}
+
+static int usbtmc488_ioctl_simple(struct usbtmc_device_data *data,
+ void __user *arg, unsigned int cmd)
+{
+ struct device *dev = &data->intf->dev;
+ __u8 val;
+ u8 *buffer;
+ u16 wValue;
+ int rv;
+
+ if (!(data->usb488_caps & USBTMC488_CAPABILITY_SIMPLE))
+ return -EINVAL;
+
+ buffer = kmalloc(8, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ if (cmd == USBTMC488_REQUEST_REN_CONTROL) {
+ rv = copy_from_user(&val, arg, sizeof(val));
+ if (rv) {
+ rv = -EFAULT;
+ goto exit;
+ }
+ wValue = val ? 1 : 0;
+ } else {
+ wValue = 0;
+ }
+
+ rv = usb_control_msg(data->usb_dev,
+ usb_rcvctrlpipe(data->usb_dev, 0),
+ cmd,
+ USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ wValue,
+ data->ifnum,
+ buffer, 0x01, USB_CTRL_GET_TIMEOUT);
+ if (rv < 0) {
+ dev_err(dev, "simple usb_control_msg failed %d\n", rv);
+ goto exit;
+ } else if (rv != 1) {
+ dev_warn(dev, "simple usb_control_msg returned %d\n", rv);
+ rv = -EIO;
+ goto exit;
+ }
+
+ if (buffer[0] != USBTMC_STATUS_SUCCESS) {
+ dev_err(dev, "simple control status returned %x\n", buffer[0]);
+ rv = -EIO;
+ goto exit;
+ }
+ rv = 0;
+
+ exit:
+ kfree(buffer);
+ return rv;
+}
+
+/*
+ * Sends a TRIGGER Bulk-OUT command message
+ * See the USBTMC-USB488 specification, Table 2.
+ *
+ * Also updates bTag_last_write.
+ */
+static int usbtmc488_ioctl_trigger(struct usbtmc_file_data *file_data)
+{
+ struct usbtmc_device_data *data = file_data->data;
+ int retval;
+ u8 *buffer;
+ int actual;
+
+ buffer = kzalloc(USBTMC_HEADER_SIZE, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ buffer[0] = 128;
+ buffer[1] = data->bTag;
+ buffer[2] = ~data->bTag;
+
+ retval = usb_bulk_msg(data->usb_dev,
+ usb_sndbulkpipe(data->usb_dev,
+ data->bulk_out),
+ buffer, USBTMC_HEADER_SIZE,
+ &actual, file_data->timeout);
+
+ /* Store bTag (in case we need to abort) */
+ data->bTag_last_write = data->bTag;
+
+ /* Increment bTag -- and increment again if zero */
+ data->bTag++;
+ if (!data->bTag)
+ data->bTag++;
+
+ kfree(buffer);
+ if (retval < 0) {
+ dev_err(&data->intf->dev, "%s returned %d\n",
+ __func__, retval);
+ return retval;
+ }
+
+ return 0;
+}
+
+static struct urb *usbtmc_create_urb(void)
+{
+ const size_t bufsize = USBTMC_BUFSIZE;
+ u8 *dmabuf = NULL;
+ struct urb *urb = usb_alloc_urb(0, GFP_KERNEL);
+
+ if (!urb)
+ return NULL;
+
+ dmabuf = kmalloc(bufsize, GFP_KERNEL);
+ if (!dmabuf) {
+ usb_free_urb(urb);
+ return NULL;
+ }
+
+ urb->transfer_buffer = dmabuf;
+ urb->transfer_buffer_length = bufsize;
+ urb->transfer_flags |= URB_FREE_BUFFER;
+ return urb;
+}
+
+static void usbtmc_read_bulk_cb(struct urb *urb)
+{
+ struct usbtmc_file_data *file_data = urb->context;
+ int status = urb->status;
+ unsigned long flags;
+
+ /* sync/async unlink faults aren't errors */
+ if (status) {
+ if (!(/* status == -ENOENT || */
+ status == -ECONNRESET ||
+ status == -EREMOTEIO || /* Short packet */
+ status == -ESHUTDOWN))
+ dev_err(&file_data->data->intf->dev,
+ "%s - nonzero read bulk status received: %d\n",
+ __func__, status);
+
+ spin_lock_irqsave(&file_data->err_lock, flags);
+ if (!file_data->in_status)
+ file_data->in_status = status;
+ spin_unlock_irqrestore(&file_data->err_lock, flags);
+ }
+
+ spin_lock_irqsave(&file_data->err_lock, flags);
+ file_data->in_transfer_size += urb->actual_length;
+ dev_dbg(&file_data->data->intf->dev,
+ "%s - total size: %u current: %d status: %d\n",
+ __func__, file_data->in_transfer_size,
+ urb->actual_length, status);
+ spin_unlock_irqrestore(&file_data->err_lock, flags);
+ usb_anchor_urb(urb, &file_data->in_anchor);
+
+ wake_up_interruptible(&file_data->wait_bulk_in);
+ wake_up_interruptible(&file_data->data->waitq);
+}
+
+static inline bool usbtmc_do_transfer(struct usbtmc_file_data *file_data)
+{
+ bool data_or_error;
+
+ spin_lock_irq(&file_data->err_lock);
+ data_or_error = !usb_anchor_empty(&file_data->in_anchor)
+ || file_data->in_status;
+ spin_unlock_irq(&file_data->err_lock);
+ dev_dbg(&file_data->data->intf->dev, "%s: returns %d\n", __func__,
+ data_or_error);
+ return data_or_error;
+}
+
+static ssize_t usbtmc_generic_read(struct usbtmc_file_data *file_data,
+ void __user *user_buffer,
+ u32 transfer_size,
+ u32 *transferred,
+ u32 flags)
+{
+ struct usbtmc_device_data *data = file_data->data;
+ struct device *dev = &data->intf->dev;
+ u32 done = 0;
+ u32 remaining;
+ const u32 bufsize = USBTMC_BUFSIZE;
+ int retval = 0;
+ u32 max_transfer_size;
+ unsigned long expire;
+ int bufcount = 1;
+ int again = 0;
+
+ /* mutex already locked */
+
+ *transferred = done;
+
+ max_transfer_size = transfer_size;
+
+ if (flags & USBTMC_FLAG_IGNORE_TRAILER) {
+ /* The device may send extra alignment bytes (up to
+ * wMaxPacketSize – 1) to avoid sending a zero-length
+ * packet
+ */
+ remaining = transfer_size;
+ if ((max_transfer_size % data->wMaxPacketSize) == 0)
+ max_transfer_size += (data->wMaxPacketSize - 1);
+ } else {
+ /* round down to bufsize to avoid truncated data left */
+ if (max_transfer_size > bufsize) {
+ max_transfer_size =
+ roundup(max_transfer_size + 1 - bufsize,
+ bufsize);
+ }
+ remaining = max_transfer_size;
+ }
+
+ spin_lock_irq(&file_data->err_lock);
+
+ if (file_data->in_status) {
+ /* return the very first error */
+ retval = file_data->in_status;
+ spin_unlock_irq(&file_data->err_lock);
+ goto error;
+ }
+
+ if (flags & USBTMC_FLAG_ASYNC) {
+ if (usb_anchor_empty(&file_data->in_anchor))
+ again = 1;
+
+ if (file_data->in_urbs_used == 0) {
+ file_data->in_transfer_size = 0;
+ file_data->in_status = 0;
+ }
+ } else {
+ file_data->in_transfer_size = 0;
+ file_data->in_status = 0;
+ }
+
+ if (max_transfer_size == 0) {
+ bufcount = 0;
+ } else {
+ bufcount = roundup(max_transfer_size, bufsize) / bufsize;
+ if (bufcount > file_data->in_urbs_used)
+ bufcount -= file_data->in_urbs_used;
+ else
+ bufcount = 0;
+
+ if (bufcount + file_data->in_urbs_used > MAX_URBS_IN_FLIGHT) {
+ bufcount = MAX_URBS_IN_FLIGHT -
+ file_data->in_urbs_used;
+ }
+ }
+ spin_unlock_irq(&file_data->err_lock);
+
+ dev_dbg(dev, "%s: requested=%u flags=0x%X size=%u bufs=%d used=%d\n",
+ __func__, transfer_size, flags,
+ max_transfer_size, bufcount, file_data->in_urbs_used);
+
+ while (bufcount > 0) {
+ u8 *dmabuf = NULL;
+ struct urb *urb = usbtmc_create_urb();
+
+ if (!urb) {
+ retval = -ENOMEM;
+ goto error;
+ }
+
+ dmabuf = urb->transfer_buffer;
+
+ usb_fill_bulk_urb(urb, data->usb_dev,
+ usb_rcvbulkpipe(data->usb_dev, data->bulk_in),
+ dmabuf, bufsize,
+ usbtmc_read_bulk_cb, file_data);
+
+ usb_anchor_urb(urb, &file_data->submitted);
+ retval = usb_submit_urb(urb, GFP_KERNEL);
+ /* urb is anchored. We can release our reference. */
+ usb_free_urb(urb);
+ if (unlikely(retval)) {
+ usb_unanchor_urb(urb);
+ goto error;
+ }
+ file_data->in_urbs_used++;
+ bufcount--;
+ }
+
+ if (again) {
+ dev_dbg(dev, "%s: ret=again\n", __func__);
+ return -EAGAIN;
+ }
+
+ if (user_buffer == NULL)
+ return -EINVAL;
+
+ expire = msecs_to_jiffies(file_data->timeout);
+
+ while (max_transfer_size > 0) {
+ u32 this_part;
+ struct urb *urb = NULL;
+
+ if (!(flags & USBTMC_FLAG_ASYNC)) {
+ dev_dbg(dev, "%s: before wait time %lu\n",
+ __func__, expire);
+ retval = wait_event_interruptible_timeout(
+ file_data->wait_bulk_in,
+ usbtmc_do_transfer(file_data),
+ expire);
+
+ dev_dbg(dev, "%s: wait returned %d\n",
+ __func__, retval);
+
+ if (retval <= 0) {
+ if (retval == 0)
+ retval = -ETIMEDOUT;
+ goto error;
+ }
+ }
+
+ urb = usb_get_from_anchor(&file_data->in_anchor);
+ if (!urb) {
+ if (!(flags & USBTMC_FLAG_ASYNC)) {
+ /* synchronous case: must not happen */
+ retval = -EFAULT;
+ goto error;
+ }
+
+ /* asynchronous case: ready, do not block or wait */
+ *transferred = done;
+ dev_dbg(dev, "%s: (async) done=%u ret=0\n",
+ __func__, done);
+ return 0;
+ }
+
+ file_data->in_urbs_used--;
+
+ if (max_transfer_size > urb->actual_length)
+ max_transfer_size -= urb->actual_length;
+ else
+ max_transfer_size = 0;
+
+ if (remaining > urb->actual_length)
+ this_part = urb->actual_length;
+ else
+ this_part = remaining;
+
+ print_hex_dump_debug("usbtmc ", DUMP_PREFIX_NONE, 16, 1,
+ urb->transfer_buffer, urb->actual_length, true);
+
+ if (copy_to_user(user_buffer + done,
+ urb->transfer_buffer, this_part)) {
+ usb_free_urb(urb);
+ retval = -EFAULT;
+ goto error;
+ }
+
+ remaining -= this_part;
+ done += this_part;
+
+ spin_lock_irq(&file_data->err_lock);
+ if (urb->status) {
+ /* return the very first error */
+ retval = file_data->in_status;
+ spin_unlock_irq(&file_data->err_lock);
+ usb_free_urb(urb);
+ goto error;
+ }
+ spin_unlock_irq(&file_data->err_lock);
+
+ if (urb->actual_length < bufsize) {
+ /* short packet or ZLP received => ready */
+ usb_free_urb(urb);
+ retval = 1;
+ break;
+ }
+
+ if (!(flags & USBTMC_FLAG_ASYNC) &&
+ max_transfer_size > (bufsize * file_data->in_urbs_used)) {
+ /* resubmit, since other buffers still not enough */
+ usb_anchor_urb(urb, &file_data->submitted);
+ retval = usb_submit_urb(urb, GFP_KERNEL);
+ if (unlikely(retval)) {
+ usb_unanchor_urb(urb);
+ usb_free_urb(urb);
+ goto error;
+ }
+ file_data->in_urbs_used++;
+ }
+ usb_free_urb(urb);
+ retval = 0;
+ }
+
+error:
+ *transferred = done;
+
+ dev_dbg(dev, "%s: before kill\n", __func__);
+ /* Attention: killing urbs can take long time (2 ms) */
+ usb_kill_anchored_urbs(&file_data->submitted);
+ dev_dbg(dev, "%s: after kill\n", __func__);
+ usb_scuttle_anchored_urbs(&file_data->in_anchor);
+ file_data->in_urbs_used = 0;
+ file_data->in_status = 0; /* no spinlock needed here */
+ dev_dbg(dev, "%s: done=%u ret=%d\n", __func__, done, retval);
+
+ return retval;
+}
+
+static ssize_t usbtmc_ioctl_generic_read(struct usbtmc_file_data *file_data,
+ void __user *arg)
+{
+ struct usbtmc_message msg;
+ ssize_t retval = 0;
+
+ /* mutex already locked */
+
+ if (copy_from_user(&msg, arg, sizeof(struct usbtmc_message)))
+ return -EFAULT;
+
+ retval = usbtmc_generic_read(file_data, msg.message,
+ msg.transfer_size, &msg.transferred,
+ msg.flags);
+
+ if (put_user(msg.transferred,
+ &((struct usbtmc_message __user *)arg)->transferred))
+ return -EFAULT;
+
+ return retval;
+}
+
+static void usbtmc_write_bulk_cb(struct urb *urb)
+{
+ struct usbtmc_file_data *file_data = urb->context;
+ int wakeup = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&file_data->err_lock, flags);
+ file_data->out_transfer_size += urb->actual_length;
+
+ /* sync/async unlink faults aren't errors */
+ if (urb->status) {
+ if (!(urb->status == -ENOENT ||
+ urb->status == -ECONNRESET ||
+ urb->status == -ESHUTDOWN))
+ dev_err(&file_data->data->intf->dev,
+ "%s - nonzero write bulk status received: %d\n",
+ __func__, urb->status);
+
+ if (!file_data->out_status) {
+ file_data->out_status = urb->status;
+ wakeup = 1;
+ }
+ }
+ spin_unlock_irqrestore(&file_data->err_lock, flags);
+
+ dev_dbg(&file_data->data->intf->dev,
+ "%s - write bulk total size: %u\n",
+ __func__, file_data->out_transfer_size);
+
+ up(&file_data->limit_write_sem);
+ if (usb_anchor_empty(&file_data->submitted) || wakeup)
+ wake_up_interruptible(&file_data->data->waitq);
+}
+
+static ssize_t usbtmc_generic_write(struct usbtmc_file_data *file_data,
+ const void __user *user_buffer,
+ u32 transfer_size,
+ u32 *transferred,
+ u32 flags)
+{
+ struct usbtmc_device_data *data = file_data->data;
+ struct device *dev;
+ u32 done = 0;
+ u32 remaining;
+ unsigned long expire;
+ const u32 bufsize = USBTMC_BUFSIZE;
+ struct urb *urb = NULL;
+ int retval = 0;
+ u32 timeout;
+
+ *transferred = 0;
+
+ /* Get pointer to private data structure */
+ dev = &data->intf->dev;
+
+ dev_dbg(dev, "%s: size=%u flags=0x%X sema=%u\n",
+ __func__, transfer_size, flags,
+ file_data->limit_write_sem.count);
+
+ if (flags & USBTMC_FLAG_APPEND) {
+ spin_lock_irq(&file_data->err_lock);
+ retval = file_data->out_status;
+ spin_unlock_irq(&file_data->err_lock);
+ if (retval < 0)
+ return retval;
+ } else {
+ spin_lock_irq(&file_data->err_lock);
+ file_data->out_transfer_size = 0;
+ file_data->out_status = 0;
+ spin_unlock_irq(&file_data->err_lock);
+ }
+
+ remaining = transfer_size;
+ if (remaining > INT_MAX)
+ remaining = INT_MAX;
+
+ timeout = file_data->timeout;
+ expire = msecs_to_jiffies(timeout);
+
+ while (remaining > 0) {
+ u32 this_part, aligned;
+ u8 *buffer = NULL;
+
+ if (flags & USBTMC_FLAG_ASYNC) {
+ if (down_trylock(&file_data->limit_write_sem)) {
+ retval = (done)?(0):(-EAGAIN);
+ goto exit;
+ }
+ } else {
+ retval = down_timeout(&file_data->limit_write_sem,
+ expire);
+ if (retval < 0) {
+ retval = -ETIMEDOUT;
+ goto error;
+ }
+ }
+
+ spin_lock_irq(&file_data->err_lock);
+ retval = file_data->out_status;
+ spin_unlock_irq(&file_data->err_lock);
+ if (retval < 0) {
+ up(&file_data->limit_write_sem);
+ goto error;
+ }
+
+ /* prepare next urb to send */
+ urb = usbtmc_create_urb();
+ if (!urb) {
+ retval = -ENOMEM;
+ up(&file_data->limit_write_sem);
+ goto error;
+ }
+ buffer = urb->transfer_buffer;
+
+ if (remaining > bufsize)
+ this_part = bufsize;
+ else
+ this_part = remaining;
+
+ if (copy_from_user(buffer, user_buffer + done, this_part)) {
+ retval = -EFAULT;
+ up(&file_data->limit_write_sem);
+ goto error;
+ }
+
+ print_hex_dump_debug("usbtmc ", DUMP_PREFIX_NONE,
+ 16, 1, buffer, this_part, true);
+
+ /* fill bulk with 32 bit alignment to meet USBTMC specification
+ * (size + 3 & ~3) rounds up and simplifies user code
+ */
+ aligned = (this_part + 3) & ~3;
+ dev_dbg(dev, "write(size:%u align:%u done:%u)\n",
+ (unsigned int)this_part,
+ (unsigned int)aligned,
+ (unsigned int)done);
+
+ usb_fill_bulk_urb(urb, data->usb_dev,
+ usb_sndbulkpipe(data->usb_dev, data->bulk_out),
+ urb->transfer_buffer, aligned,
+ usbtmc_write_bulk_cb, file_data);
+
+ usb_anchor_urb(urb, &file_data->submitted);
+ retval = usb_submit_urb(urb, GFP_KERNEL);
+ if (unlikely(retval)) {
+ usb_unanchor_urb(urb);
+ up(&file_data->limit_write_sem);
+ goto error;
+ }
+
+ usb_free_urb(urb);
+ urb = NULL; /* urb will be finally released by usb driver */
+
+ remaining -= this_part;
+ done += this_part;
+ }
+
+ /* All urbs are on the fly */
+ if (!(flags & USBTMC_FLAG_ASYNC)) {
+ if (!usb_wait_anchor_empty_timeout(&file_data->submitted,
+ timeout)) {
+ retval = -ETIMEDOUT;
+ goto error;
+ }
+ }
+
+ retval = 0;
+ goto exit;
+
+error:
+ usb_kill_anchored_urbs(&file_data->submitted);
+exit:
+ usb_free_urb(urb);
+
+ spin_lock_irq(&file_data->err_lock);
+ if (!(flags & USBTMC_FLAG_ASYNC))
+ done = file_data->out_transfer_size;
+ if (!retval && file_data->out_status)
+ retval = file_data->out_status;
+ spin_unlock_irq(&file_data->err_lock);
+
+ *transferred = done;
+
+ dev_dbg(dev, "%s: done=%u, retval=%d, urbstat=%d\n",
+ __func__, done, retval, file_data->out_status);
+
+ return retval;
+}
+
+static ssize_t usbtmc_ioctl_generic_write(struct usbtmc_file_data *file_data,
+ void __user *arg)
+{
+ struct usbtmc_message msg;
+ ssize_t retval = 0;
+
+ /* mutex already locked */
+
+ if (copy_from_user(&msg, arg, sizeof(struct usbtmc_message)))
+ return -EFAULT;
+
+ retval = usbtmc_generic_write(file_data, msg.message,
+ msg.transfer_size, &msg.transferred,
+ msg.flags);
+
+ if (put_user(msg.transferred,
+ &((struct usbtmc_message __user *)arg)->transferred))
+ return -EFAULT;
+
+ return retval;
+}
+
+/*
+ * Get the generic write result
+ */
+static ssize_t usbtmc_ioctl_write_result(struct usbtmc_file_data *file_data,
+ void __user *arg)
+{
+ u32 transferred;
+ int retval;
+
+ spin_lock_irq(&file_data->err_lock);
+ transferred = file_data->out_transfer_size;
+ retval = file_data->out_status;
+ spin_unlock_irq(&file_data->err_lock);
+
+ if (put_user(transferred, (__u32 __user *)arg))
+ return -EFAULT;
+
+ return retval;
+}
+
+/*
+ * Sends a REQUEST_DEV_DEP_MSG_IN message on the Bulk-OUT endpoint.
+ * @transfer_size: number of bytes to request from the device.
+ *
+ * See the USBTMC specification, Table 4.
+ *
+ * Also updates bTag_last_write.
+ */
+static int send_request_dev_dep_msg_in(struct usbtmc_file_data *file_data,
+ u32 transfer_size)
+{
+ struct usbtmc_device_data *data = file_data->data;
+ int retval;
+ u8 *buffer;
+ int actual;
+
+ buffer = kmalloc(USBTMC_HEADER_SIZE, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+ /* Setup IO buffer for REQUEST_DEV_DEP_MSG_IN message
+ * Refer to class specs for details
+ */
+ buffer[0] = 2;
+ buffer[1] = data->bTag;
+ buffer[2] = ~data->bTag;
+ buffer[3] = 0; /* Reserved */
+ buffer[4] = transfer_size >> 0;
+ buffer[5] = transfer_size >> 8;
+ buffer[6] = transfer_size >> 16;
+ buffer[7] = transfer_size >> 24;
+ buffer[8] = file_data->term_char_enabled * 2;
+ /* Use term character? */
+ buffer[9] = file_data->term_char;
+ buffer[10] = 0; /* Reserved */
+ buffer[11] = 0; /* Reserved */
+
+ /* Send bulk URB */
+ retval = usb_bulk_msg(data->usb_dev,
+ usb_sndbulkpipe(data->usb_dev,
+ data->bulk_out),
+ buffer, USBTMC_HEADER_SIZE,
+ &actual, file_data->timeout);
+
+ /* Store bTag (in case we need to abort) */
+ data->bTag_last_write = data->bTag;
+
+ /* Increment bTag -- and increment again if zero */
+ data->bTag++;
+ if (!data->bTag)
+ data->bTag++;
+
+ kfree(buffer);
+ if (retval < 0)
+ dev_err(&data->intf->dev, "%s returned %d\n",
+ __func__, retval);
+
+ return retval;
+}
+
+static ssize_t usbtmc_read(struct file *filp, char __user *buf,
+ size_t count, loff_t *f_pos)
+{
+ struct usbtmc_file_data *file_data;
+ struct usbtmc_device_data *data;
+ struct device *dev;
+ const u32 bufsize = USBTMC_BUFSIZE;
+ u32 n_characters;
+ u8 *buffer;
+ int actual;
+ u32 done = 0;
+ u32 remaining;
+ int retval;
+
+ /* Get pointer to private data structure */
+ file_data = filp->private_data;
+ data = file_data->data;
+ dev = &data->intf->dev;
+
+ buffer = kmalloc(bufsize, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ mutex_lock(&data->io_mutex);
+ if (data->zombie) {
+ retval = -ENODEV;
+ goto exit;
+ }
+
+ if (count > INT_MAX)
+ count = INT_MAX;
+
+ dev_dbg(dev, "%s(count:%zu)\n", __func__, count);
+
+ retval = send_request_dev_dep_msg_in(file_data, count);
+
+ if (retval < 0) {
+ if (file_data->auto_abort)
+ usbtmc_ioctl_abort_bulk_out(data);
+ goto exit;
+ }
+
+ /* Loop until we have fetched everything we requested */
+ remaining = count;
+ actual = 0;
+
+ /* Send bulk URB */
+ retval = usb_bulk_msg(data->usb_dev,
+ usb_rcvbulkpipe(data->usb_dev,
+ data->bulk_in),
+ buffer, bufsize, &actual,
+ file_data->timeout);
+
+ dev_dbg(dev, "%s: bulk_msg retval(%u), actual(%d)\n",
+ __func__, retval, actual);
+
+ /* Store bTag (in case we need to abort) */
+ data->bTag_last_read = data->bTag;
+
+ if (retval < 0) {
+ if (file_data->auto_abort)
+ usbtmc_ioctl_abort_bulk_in(data);
+ goto exit;
+ }
+
+ /* Sanity checks for the header */
+ if (actual < USBTMC_HEADER_SIZE) {
+ dev_err(dev, "Device sent too small first packet: %u < %u\n",
+ actual, USBTMC_HEADER_SIZE);
+ if (file_data->auto_abort)
+ usbtmc_ioctl_abort_bulk_in(data);
+ goto exit;
+ }
+
+ if (buffer[0] != 2) {
+ dev_err(dev, "Device sent reply with wrong MsgID: %u != 2\n",
+ buffer[0]);
+ if (file_data->auto_abort)
+ usbtmc_ioctl_abort_bulk_in(data);
+ goto exit;
+ }
+
+ if (buffer[1] != data->bTag_last_write) {
+ dev_err(dev, "Device sent reply with wrong bTag: %u != %u\n",
+ buffer[1], data->bTag_last_write);
+ if (file_data->auto_abort)
+ usbtmc_ioctl_abort_bulk_in(data);
+ goto exit;
+ }
+
+ /* How many characters did the instrument send? */
+ n_characters = buffer[4] +
+ (buffer[5] << 8) +
+ (buffer[6] << 16) +
+ (buffer[7] << 24);
+
+ file_data->bmTransferAttributes = buffer[8];
+
+ dev_dbg(dev, "Bulk-IN header: N_characters(%u), bTransAttr(%u)\n",
+ n_characters, buffer[8]);
+
+ if (n_characters > remaining) {
+ dev_err(dev, "Device wants to return more data than requested: %u > %zu\n",
+ n_characters, count);
+ if (file_data->auto_abort)
+ usbtmc_ioctl_abort_bulk_in(data);
+ goto exit;
+ }
+
+ print_hex_dump_debug("usbtmc ", DUMP_PREFIX_NONE,
+ 16, 1, buffer, actual, true);
+
+ remaining = n_characters;
+
+ /* Remove the USBTMC header */
+ actual -= USBTMC_HEADER_SIZE;
+
+ /* Remove padding if it exists */
+ if (actual > remaining)
+ actual = remaining;
+
+ remaining -= actual;
+
+ /* Copy buffer to user space */
+ if (copy_to_user(buf, &buffer[USBTMC_HEADER_SIZE], actual)) {
+ /* There must have been an addressing problem */
+ retval = -EFAULT;
+ goto exit;
+ }
+
+ if ((actual + USBTMC_HEADER_SIZE) == bufsize) {
+ retval = usbtmc_generic_read(file_data, buf + actual,
+ remaining,
+ &done,
+ USBTMC_FLAG_IGNORE_TRAILER);
+ if (retval < 0)
+ goto exit;
+ }
+ done += actual;
+
+ /* Update file position value */
+ *f_pos = *f_pos + done;
+ retval = done;
+
+exit:
+ mutex_unlock(&data->io_mutex);
+ kfree(buffer);
+ return retval;
+}
+
+static ssize_t usbtmc_write(struct file *filp, const char __user *buf,
+ size_t count, loff_t *f_pos)
+{
+ struct usbtmc_file_data *file_data;
+ struct usbtmc_device_data *data;
+ struct urb *urb = NULL;
+ ssize_t retval = 0;
+ u8 *buffer;
+ u32 remaining, done;
+ u32 transfersize, aligned, buflen;
+
+ file_data = filp->private_data;
+ data = file_data->data;
+
+ mutex_lock(&data->io_mutex);
+
+ if (data->zombie) {
+ retval = -ENODEV;
+ goto exit;
+ }
+
+ done = 0;
+
+ spin_lock_irq(&file_data->err_lock);
+ file_data->out_transfer_size = 0;
+ file_data->out_status = 0;
+ spin_unlock_irq(&file_data->err_lock);
+
+ if (!count)
+ goto exit;
+
+ if (down_trylock(&file_data->limit_write_sem)) {
+ /* previous calls were async */
+ retval = -EBUSY;
+ goto exit;
+ }
+
+ urb = usbtmc_create_urb();
+ if (!urb) {
+ retval = -ENOMEM;
+ up(&file_data->limit_write_sem);
+ goto exit;
+ }
+
+ buffer = urb->transfer_buffer;
+ buflen = urb->transfer_buffer_length;
+
+ if (count > INT_MAX) {
+ transfersize = INT_MAX;
+ buffer[8] = 0;
+ } else {
+ transfersize = count;
+ buffer[8] = file_data->eom_val;
+ }
+
+ /* Setup IO buffer for DEV_DEP_MSG_OUT message */
+ buffer[0] = 1;
+ buffer[1] = data->bTag;
+ buffer[2] = ~data->bTag;
+ buffer[3] = 0; /* Reserved */
+ buffer[4] = transfersize >> 0;
+ buffer[5] = transfersize >> 8;
+ buffer[6] = transfersize >> 16;
+ buffer[7] = transfersize >> 24;
+ /* buffer[8] is set above... */
+ buffer[9] = 0; /* Reserved */
+ buffer[10] = 0; /* Reserved */
+ buffer[11] = 0; /* Reserved */
+
+ remaining = transfersize;
+
+ if (transfersize + USBTMC_HEADER_SIZE > buflen) {
+ transfersize = buflen - USBTMC_HEADER_SIZE;
+ aligned = buflen;
+ } else {
+ aligned = (transfersize + (USBTMC_HEADER_SIZE + 3)) & ~3;
+ }
+
+ if (copy_from_user(&buffer[USBTMC_HEADER_SIZE], buf, transfersize)) {
+ retval = -EFAULT;
+ up(&file_data->limit_write_sem);
+ goto exit;
+ }
+
+ dev_dbg(&data->intf->dev, "%s(size:%u align:%u)\n", __func__,
+ (unsigned int)transfersize, (unsigned int)aligned);
+
+ print_hex_dump_debug("usbtmc ", DUMP_PREFIX_NONE,
+ 16, 1, buffer, aligned, true);
+
+ usb_fill_bulk_urb(urb, data->usb_dev,
+ usb_sndbulkpipe(data->usb_dev, data->bulk_out),
+ urb->transfer_buffer, aligned,
+ usbtmc_write_bulk_cb, file_data);
+
+ usb_anchor_urb(urb, &file_data->submitted);
+ retval = usb_submit_urb(urb, GFP_KERNEL);
+ if (unlikely(retval)) {
+ usb_unanchor_urb(urb);
+ up(&file_data->limit_write_sem);
+ goto exit;
+ }
+
+ remaining -= transfersize;
+
+ data->bTag_last_write = data->bTag;
+ data->bTag++;
+
+ if (!data->bTag)
+ data->bTag++;
+
+ /* call generic_write even when remaining = 0 */
+ retval = usbtmc_generic_write(file_data, buf + transfersize, remaining,
+ &done, USBTMC_FLAG_APPEND);
+ /* truncate alignment bytes */
+ if (done > remaining)
+ done = remaining;
+
+ /*add size of first urb*/
+ done += transfersize;
+
+ if (retval < 0) {
+ usb_kill_anchored_urbs(&file_data->submitted);
+
+ dev_err(&data->intf->dev,
+ "Unable to send data, error %d\n", (int)retval);
+ if (file_data->auto_abort)
+ usbtmc_ioctl_abort_bulk_out(data);
+ goto exit;
+ }
+
+ retval = done;
+exit:
+ usb_free_urb(urb);
+ mutex_unlock(&data->io_mutex);
+ return retval;
+}
+
+static int usbtmc_ioctl_clear(struct usbtmc_device_data *data)
+{
+ struct device *dev;
+ u8 *buffer;
+ int rv;
+ int n;
+ int actual = 0;
+
+ dev = &data->intf->dev;
+
+ dev_dbg(dev, "Sending INITIATE_CLEAR request\n");
+
+ buffer = kmalloc(USBTMC_BUFSIZE, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ rv = usb_control_msg(data->usb_dev,
+ usb_rcvctrlpipe(data->usb_dev, 0),
+ USBTMC_REQUEST_INITIATE_CLEAR,
+ USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ 0, 0, buffer, 1, USB_CTRL_GET_TIMEOUT);
+ if (rv < 0) {
+ dev_err(dev, "usb_control_msg returned %d\n", rv);
+ goto exit;
+ }
+
+ dev_dbg(dev, "INITIATE_CLEAR returned %x\n", buffer[0]);
+
+ if (buffer[0] != USBTMC_STATUS_SUCCESS) {
+ dev_err(dev, "INITIATE_CLEAR returned %x\n", buffer[0]);
+ rv = -EPERM;
+ goto exit;
+ }
+
+ n = 0;
+
+usbtmc_clear_check_status:
+
+ dev_dbg(dev, "Sending CHECK_CLEAR_STATUS request\n");
+
+ rv = usb_control_msg(data->usb_dev,
+ usb_rcvctrlpipe(data->usb_dev, 0),
+ USBTMC_REQUEST_CHECK_CLEAR_STATUS,
+ USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ 0, 0, buffer, 2, USB_CTRL_GET_TIMEOUT);
+ if (rv < 0) {
+ dev_err(dev, "usb_control_msg returned %d\n", rv);
+ goto exit;
+ }
+
+ dev_dbg(dev, "CHECK_CLEAR_STATUS returned %x\n", buffer[0]);
+
+ if (buffer[0] == USBTMC_STATUS_SUCCESS)
+ goto usbtmc_clear_bulk_out_halt;
+
+ if (buffer[0] != USBTMC_STATUS_PENDING) {
+ dev_err(dev, "CHECK_CLEAR_STATUS returned %x\n", buffer[0]);
+ rv = -EPERM;
+ goto exit;
+ }
+
+ if ((buffer[1] & 1) != 0) {
+ do {
+ dev_dbg(dev, "Reading from bulk in EP\n");
+
+ actual = 0;
+ rv = usb_bulk_msg(data->usb_dev,
+ usb_rcvbulkpipe(data->usb_dev,
+ data->bulk_in),
+ buffer, USBTMC_BUFSIZE,
+ &actual, USB_CTRL_GET_TIMEOUT);
+
+ print_hex_dump_debug("usbtmc ", DUMP_PREFIX_NONE,
+ 16, 1, buffer, actual, true);
+
+ n++;
+
+ if (rv < 0) {
+ dev_err(dev, "usb_control_msg returned %d\n",
+ rv);
+ goto exit;
+ }
+ } while ((actual == USBTMC_BUFSIZE) &&
+ (n < USBTMC_MAX_READS_TO_CLEAR_BULK_IN));
+ } else {
+ /* do not stress device with subsequent requests */
+ msleep(50);
+ n++;
+ }
+
+ if (n >= USBTMC_MAX_READS_TO_CLEAR_BULK_IN) {
+ dev_err(dev, "Couldn't clear device buffer within %d cycles\n",
+ USBTMC_MAX_READS_TO_CLEAR_BULK_IN);
+ rv = -EPERM;
+ goto exit;
+ }
+
+ goto usbtmc_clear_check_status;
+
+usbtmc_clear_bulk_out_halt:
+
+ rv = usb_clear_halt(data->usb_dev,
+ usb_sndbulkpipe(data->usb_dev, data->bulk_out));
+ if (rv < 0) {
+ dev_err(dev, "usb_clear_halt returned %d\n", rv);
+ goto exit;
+ }
+ rv = 0;
+
+exit:
+ kfree(buffer);
+ return rv;
+}
+
+static int usbtmc_ioctl_clear_out_halt(struct usbtmc_device_data *data)
+{
+ int rv;
+
+ rv = usb_clear_halt(data->usb_dev,
+ usb_sndbulkpipe(data->usb_dev, data->bulk_out));
+
+ if (rv < 0)
+ dev_err(&data->usb_dev->dev, "%s returned %d\n", __func__, rv);
+ return rv;
+}
+
+static int usbtmc_ioctl_clear_in_halt(struct usbtmc_device_data *data)
+{
+ int rv;
+
+ rv = usb_clear_halt(data->usb_dev,
+ usb_rcvbulkpipe(data->usb_dev, data->bulk_in));
+
+ if (rv < 0)
+ dev_err(&data->usb_dev->dev, "%s returned %d\n", __func__, rv);
+ return rv;
+}
+
+static int usbtmc_ioctl_cancel_io(struct usbtmc_file_data *file_data)
+{
+ spin_lock_irq(&file_data->err_lock);
+ file_data->in_status = -ECANCELED;
+ file_data->out_status = -ECANCELED;
+ spin_unlock_irq(&file_data->err_lock);
+ usb_kill_anchored_urbs(&file_data->submitted);
+ return 0;
+}
+
+static int usbtmc_ioctl_cleanup_io(struct usbtmc_file_data *file_data)
+{
+ usb_kill_anchored_urbs(&file_data->submitted);
+ usb_scuttle_anchored_urbs(&file_data->in_anchor);
+ spin_lock_irq(&file_data->err_lock);
+ file_data->in_status = 0;
+ file_data->in_transfer_size = 0;
+ file_data->out_status = 0;
+ file_data->out_transfer_size = 0;
+ spin_unlock_irq(&file_data->err_lock);
+
+ file_data->in_urbs_used = 0;
+ return 0;
+}
+
+static int get_capabilities(struct usbtmc_device_data *data)
+{
+ struct device *dev = &data->usb_dev->dev;
+ char *buffer;
+ int rv = 0;
+
+ buffer = kmalloc(0x18, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ rv = usb_control_msg(data->usb_dev, usb_rcvctrlpipe(data->usb_dev, 0),
+ USBTMC_REQUEST_GET_CAPABILITIES,
+ USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ 0, 0, buffer, 0x18, USB_CTRL_GET_TIMEOUT);
+ if (rv < 0) {
+ dev_err(dev, "usb_control_msg returned %d\n", rv);
+ goto err_out;
+ }
+
+ dev_dbg(dev, "GET_CAPABILITIES returned %x\n", buffer[0]);
+ if (buffer[0] != USBTMC_STATUS_SUCCESS) {
+ dev_err(dev, "GET_CAPABILITIES returned %x\n", buffer[0]);
+ rv = -EPERM;
+ goto err_out;
+ }
+ dev_dbg(dev, "Interface capabilities are %x\n", buffer[4]);
+ dev_dbg(dev, "Device capabilities are %x\n", buffer[5]);
+ dev_dbg(dev, "USB488 interface capabilities are %x\n", buffer[14]);
+ dev_dbg(dev, "USB488 device capabilities are %x\n", buffer[15]);
+
+ data->capabilities.interface_capabilities = buffer[4];
+ data->capabilities.device_capabilities = buffer[5];
+ data->capabilities.usb488_interface_capabilities = buffer[14];
+ data->capabilities.usb488_device_capabilities = buffer[15];
+ data->usb488_caps = (buffer[14] & 0x07) | ((buffer[15] & 0x0f) << 4);
+ rv = 0;
+
+err_out:
+ kfree(buffer);
+ return rv;
+}
+
+#define capability_attribute(name) \
+static ssize_t name##_show(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ struct usb_interface *intf = to_usb_interface(dev); \
+ struct usbtmc_device_data *data = usb_get_intfdata(intf); \
+ \
+ return sprintf(buf, "%d\n", data->capabilities.name); \
+} \
+static DEVICE_ATTR_RO(name)
+
+capability_attribute(interface_capabilities);
+capability_attribute(device_capabilities);
+capability_attribute(usb488_interface_capabilities);
+capability_attribute(usb488_device_capabilities);
+
+static struct attribute *usbtmc_attrs[] = {
+ &dev_attr_interface_capabilities.attr,
+ &dev_attr_device_capabilities.attr,
+ &dev_attr_usb488_interface_capabilities.attr,
+ &dev_attr_usb488_device_capabilities.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(usbtmc);
+
+static int usbtmc_ioctl_indicator_pulse(struct usbtmc_device_data *data)
+{
+ struct device *dev;
+ u8 *buffer;
+ int rv;
+
+ dev = &data->intf->dev;
+
+ buffer = kmalloc(2, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ rv = usb_control_msg(data->usb_dev,
+ usb_rcvctrlpipe(data->usb_dev, 0),
+ USBTMC_REQUEST_INDICATOR_PULSE,
+ USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ 0, 0, buffer, 0x01, USB_CTRL_GET_TIMEOUT);
+
+ if (rv < 0) {
+ dev_err(dev, "usb_control_msg returned %d\n", rv);
+ goto exit;
+ }
+
+ dev_dbg(dev, "INDICATOR_PULSE returned %x\n", buffer[0]);
+
+ if (buffer[0] != USBTMC_STATUS_SUCCESS) {
+ dev_err(dev, "INDICATOR_PULSE returned %x\n", buffer[0]);
+ rv = -EPERM;
+ goto exit;
+ }
+ rv = 0;
+
+exit:
+ kfree(buffer);
+ return rv;
+}
+
+static int usbtmc_ioctl_request(struct usbtmc_device_data *data,
+ void __user *arg)
+{
+ struct device *dev = &data->intf->dev;
+ struct usbtmc_ctrlrequest request;
+ u8 *buffer = NULL;
+ int rv;
+ unsigned int is_in, pipe;
+ unsigned long res;
+
+ res = copy_from_user(&request, arg, sizeof(struct usbtmc_ctrlrequest));
+ if (res)
+ return -EFAULT;
+
+ if (request.req.wLength > USBTMC_BUFSIZE)
+ return -EMSGSIZE;
+ if (request.req.wLength == 0) /* Length-0 requests are never IN */
+ request.req.bRequestType &= ~USB_DIR_IN;
+
+ is_in = request.req.bRequestType & USB_DIR_IN;
+
+ if (request.req.wLength) {
+ buffer = kmalloc(request.req.wLength, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ if (!is_in) {
+ /* Send control data to device */
+ res = copy_from_user(buffer, request.data,
+ request.req.wLength);
+ if (res) {
+ rv = -EFAULT;
+ goto exit;
+ }
+ }
+ }
+
+ if (is_in)
+ pipe = usb_rcvctrlpipe(data->usb_dev, 0);
+ else
+ pipe = usb_sndctrlpipe(data->usb_dev, 0);
+ rv = usb_control_msg(data->usb_dev,
+ pipe,
+ request.req.bRequest,
+ request.req.bRequestType,
+ request.req.wValue,
+ request.req.wIndex,
+ buffer, request.req.wLength, USB_CTRL_GET_TIMEOUT);
+
+ if (rv < 0) {
+ dev_err(dev, "%s failed %d\n", __func__, rv);
+ goto exit;
+ }
+
+ if (rv && is_in) {
+ /* Read control data from device */
+ res = copy_to_user(request.data, buffer, rv);
+ if (res)
+ rv = -EFAULT;
+ }
+
+ exit:
+ kfree(buffer);
+ return rv;
+}
+
+/*
+ * Get the usb timeout value
+ */
+static int usbtmc_ioctl_get_timeout(struct usbtmc_file_data *file_data,
+ void __user *arg)
+{
+ u32 timeout;
+
+ timeout = file_data->timeout;
+
+ return put_user(timeout, (__u32 __user *)arg);
+}
+
+/*
+ * Set the usb timeout value
+ */
+static int usbtmc_ioctl_set_timeout(struct usbtmc_file_data *file_data,
+ void __user *arg)
+{
+ u32 timeout;
+
+ if (get_user(timeout, (__u32 __user *)arg))
+ return -EFAULT;
+
+ /* Note that timeout = 0 means
+ * MAX_SCHEDULE_TIMEOUT in usb_control_msg
+ */
+ if (timeout < USBTMC_MIN_TIMEOUT)
+ return -EINVAL;
+
+ file_data->timeout = timeout;
+
+ return 0;
+}
+
+/*
+ * enables/disables sending EOM on write
+ */
+static int usbtmc_ioctl_eom_enable(struct usbtmc_file_data *file_data,
+ void __user *arg)
+{
+ u8 eom_enable;
+
+ if (copy_from_user(&eom_enable, arg, sizeof(eom_enable)))
+ return -EFAULT;
+
+ if (eom_enable > 1)
+ return -EINVAL;
+
+ file_data->eom_val = eom_enable;
+
+ return 0;
+}
+
+/*
+ * Configure termination character for read()
+ */
+static int usbtmc_ioctl_config_termc(struct usbtmc_file_data *file_data,
+ void __user *arg)
+{
+ struct usbtmc_termchar termc;
+
+ if (copy_from_user(&termc, arg, sizeof(termc)))
+ return -EFAULT;
+
+ if ((termc.term_char_enabled > 1) ||
+ (termc.term_char_enabled &&
+ !(file_data->data->capabilities.device_capabilities & 1)))
+ return -EINVAL;
+
+ file_data->term_char = termc.term_char;
+ file_data->term_char_enabled = termc.term_char_enabled;
+
+ return 0;
+}
+
+static long usbtmc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct usbtmc_file_data *file_data;
+ struct usbtmc_device_data *data;
+ int retval = -EBADRQC;
+ __u8 tmp_byte;
+
+ file_data = file->private_data;
+ data = file_data->data;
+
+ mutex_lock(&data->io_mutex);
+ if (data->zombie) {
+ retval = -ENODEV;
+ goto skip_io_on_zombie;
+ }
+
+ switch (cmd) {
+ case USBTMC_IOCTL_CLEAR_OUT_HALT:
+ retval = usbtmc_ioctl_clear_out_halt(data);
+ break;
+
+ case USBTMC_IOCTL_CLEAR_IN_HALT:
+ retval = usbtmc_ioctl_clear_in_halt(data);
+ break;
+
+ case USBTMC_IOCTL_INDICATOR_PULSE:
+ retval = usbtmc_ioctl_indicator_pulse(data);
+ break;
+
+ case USBTMC_IOCTL_CLEAR:
+ retval = usbtmc_ioctl_clear(data);
+ break;
+
+ case USBTMC_IOCTL_ABORT_BULK_OUT:
+ retval = usbtmc_ioctl_abort_bulk_out(data);
+ break;
+
+ case USBTMC_IOCTL_ABORT_BULK_IN:
+ retval = usbtmc_ioctl_abort_bulk_in(data);
+ break;
+
+ case USBTMC_IOCTL_CTRL_REQUEST:
+ retval = usbtmc_ioctl_request(data, (void __user *)arg);
+ break;
+
+ case USBTMC_IOCTL_GET_TIMEOUT:
+ retval = usbtmc_ioctl_get_timeout(file_data,
+ (void __user *)arg);
+ break;
+
+ case USBTMC_IOCTL_SET_TIMEOUT:
+ retval = usbtmc_ioctl_set_timeout(file_data,
+ (void __user *)arg);
+ break;
+
+ case USBTMC_IOCTL_EOM_ENABLE:
+ retval = usbtmc_ioctl_eom_enable(file_data,
+ (void __user *)arg);
+ break;
+
+ case USBTMC_IOCTL_CONFIG_TERMCHAR:
+ retval = usbtmc_ioctl_config_termc(file_data,
+ (void __user *)arg);
+ break;
+
+ case USBTMC_IOCTL_WRITE:
+ retval = usbtmc_ioctl_generic_write(file_data,
+ (void __user *)arg);
+ break;
+
+ case USBTMC_IOCTL_READ:
+ retval = usbtmc_ioctl_generic_read(file_data,
+ (void __user *)arg);
+ break;
+
+ case USBTMC_IOCTL_WRITE_RESULT:
+ retval = usbtmc_ioctl_write_result(file_data,
+ (void __user *)arg);
+ break;
+
+ case USBTMC_IOCTL_API_VERSION:
+ retval = put_user(USBTMC_API_VERSION,
+ (__u32 __user *)arg);
+ break;
+
+ case USBTMC488_IOCTL_GET_CAPS:
+ retval = put_user(data->usb488_caps,
+ (unsigned char __user *)arg);
+ break;
+
+ case USBTMC488_IOCTL_READ_STB:
+ retval = usbtmc488_ioctl_read_stb(file_data,
+ (void __user *)arg);
+ break;
+
+ case USBTMC488_IOCTL_REN_CONTROL:
+ retval = usbtmc488_ioctl_simple(data, (void __user *)arg,
+ USBTMC488_REQUEST_REN_CONTROL);
+ break;
+
+ case USBTMC488_IOCTL_GOTO_LOCAL:
+ retval = usbtmc488_ioctl_simple(data, (void __user *)arg,
+ USBTMC488_REQUEST_GOTO_LOCAL);
+ break;
+
+ case USBTMC488_IOCTL_LOCAL_LOCKOUT:
+ retval = usbtmc488_ioctl_simple(data, (void __user *)arg,
+ USBTMC488_REQUEST_LOCAL_LOCKOUT);
+ break;
+
+ case USBTMC488_IOCTL_TRIGGER:
+ retval = usbtmc488_ioctl_trigger(file_data);
+ break;
+
+ case USBTMC488_IOCTL_WAIT_SRQ:
+ retval = usbtmc488_ioctl_wait_srq(file_data,
+ (__u32 __user *)arg);
+ break;
+
+ case USBTMC_IOCTL_MSG_IN_ATTR:
+ retval = put_user(file_data->bmTransferAttributes,
+ (__u8 __user *)arg);
+ break;
+
+ case USBTMC_IOCTL_AUTO_ABORT:
+ retval = get_user(tmp_byte, (unsigned char __user *)arg);
+ if (retval == 0)
+ file_data->auto_abort = !!tmp_byte;
+ break;
+
+ case USBTMC_IOCTL_GET_STB:
+ retval = usbtmc_get_stb(file_data, &tmp_byte);
+ if (retval > 0)
+ retval = put_user(tmp_byte, (__u8 __user *)arg);
+ break;
+
+ case USBTMC_IOCTL_GET_SRQ_STB:
+ retval = usbtmc_ioctl_get_srq_stb(file_data,
+ (void __user *)arg);
+ break;
+
+ case USBTMC_IOCTL_CANCEL_IO:
+ retval = usbtmc_ioctl_cancel_io(file_data);
+ break;
+
+ case USBTMC_IOCTL_CLEANUP_IO:
+ retval = usbtmc_ioctl_cleanup_io(file_data);
+ break;
+ }
+
+skip_io_on_zombie:
+ mutex_unlock(&data->io_mutex);
+ return retval;
+}
+
+static int usbtmc_fasync(int fd, struct file *file, int on)
+{
+ struct usbtmc_file_data *file_data = file->private_data;
+
+ return fasync_helper(fd, file, on, &file_data->data->fasync);
+}
+
+static __poll_t usbtmc_poll(struct file *file, poll_table *wait)
+{
+ struct usbtmc_file_data *file_data = file->private_data;
+ struct usbtmc_device_data *data = file_data->data;
+ __poll_t mask;
+
+ mutex_lock(&data->io_mutex);
+
+ if (data->zombie) {
+ mask = EPOLLHUP | EPOLLERR;
+ goto no_poll;
+ }
+
+ poll_wait(file, &data->waitq, wait);
+
+ /* Note that EPOLLPRI is now assigned to SRQ, and
+ * EPOLLIN|EPOLLRDNORM to normal read data.
+ */
+ mask = 0;
+ if (atomic_read(&file_data->srq_asserted))
+ mask |= EPOLLPRI;
+
+ /* Note that the anchor submitted includes all urbs for BULK IN
+ * and OUT. So EPOLLOUT is signaled when BULK OUT is empty and
+ * all BULK IN urbs are completed and moved to in_anchor.
+ */
+ if (usb_anchor_empty(&file_data->submitted))
+ mask |= (EPOLLOUT | EPOLLWRNORM);
+ if (!usb_anchor_empty(&file_data->in_anchor))
+ mask |= (EPOLLIN | EPOLLRDNORM);
+
+ spin_lock_irq(&file_data->err_lock);
+ if (file_data->in_status || file_data->out_status)
+ mask |= EPOLLERR;
+ spin_unlock_irq(&file_data->err_lock);
+
+ dev_dbg(&data->intf->dev, "poll mask = %x\n", mask);
+
+no_poll:
+ mutex_unlock(&data->io_mutex);
+ return mask;
+}
+
+static const struct file_operations fops = {
+ .owner = THIS_MODULE,
+ .read = usbtmc_read,
+ .write = usbtmc_write,
+ .open = usbtmc_open,
+ .release = usbtmc_release,
+ .flush = usbtmc_flush,
+ .unlocked_ioctl = usbtmc_ioctl,
+ .compat_ioctl = compat_ptr_ioctl,
+ .fasync = usbtmc_fasync,
+ .poll = usbtmc_poll,
+ .llseek = default_llseek,
+};
+
+static struct usb_class_driver usbtmc_class = {
+ .name = "usbtmc%d",
+ .fops = &fops,
+ .minor_base = USBTMC_MINOR_BASE,
+};
+
+static void usbtmc_interrupt(struct urb *urb)
+{
+ struct usbtmc_device_data *data = urb->context;
+ struct device *dev = &data->intf->dev;
+ int status = urb->status;
+ int rv;
+
+ dev_dbg(&data->intf->dev, "int status: %d len %d\n",
+ status, urb->actual_length);
+
+ switch (status) {
+ case 0: /* SUCCESS */
+ /* check for valid STB notification */
+ if (data->iin_buffer[0] > 0x81) {
+ data->bNotify1 = data->iin_buffer[0];
+ data->bNotify2 = data->iin_buffer[1];
+ atomic_set(&data->iin_data_valid, 1);
+ wake_up_interruptible(&data->waitq);
+ goto exit;
+ }
+ /* check for SRQ notification */
+ if (data->iin_buffer[0] == 0x81) {
+ unsigned long flags;
+ struct list_head *elem;
+
+ if (data->fasync)
+ kill_fasync(&data->fasync,
+ SIGIO, POLL_PRI);
+
+ spin_lock_irqsave(&data->dev_lock, flags);
+ list_for_each(elem, &data->file_list) {
+ struct usbtmc_file_data *file_data;
+
+ file_data = list_entry(elem,
+ struct usbtmc_file_data,
+ file_elem);
+ file_data->srq_byte = data->iin_buffer[1];
+ atomic_set(&file_data->srq_asserted, 1);
+ }
+ spin_unlock_irqrestore(&data->dev_lock, flags);
+
+ dev_dbg(dev, "srq received bTag %x stb %x\n",
+ (unsigned int)data->iin_buffer[0],
+ (unsigned int)data->iin_buffer[1]);
+ wake_up_interruptible_all(&data->waitq);
+ goto exit;
+ }
+ dev_warn(dev, "invalid notification: %x\n",
+ data->iin_buffer[0]);
+ break;
+ case -EOVERFLOW:
+ dev_err(dev, "overflow with length %d, actual length is %d\n",
+ data->iin_wMaxPacketSize, urb->actual_length);
+ fallthrough;
+ default:
+ /* urb terminated, clean up */
+ dev_dbg(dev, "urb terminated, status: %d\n", status);
+ return;
+ }
+exit:
+ rv = usb_submit_urb(urb, GFP_ATOMIC);
+ if (rv)
+ dev_err(dev, "usb_submit_urb failed: %d\n", rv);
+}
+
+static void usbtmc_free_int(struct usbtmc_device_data *data)
+{
+ if (!data->iin_ep_present || !data->iin_urb)
+ return;
+ usb_kill_urb(data->iin_urb);
+ kfree(data->iin_buffer);
+ data->iin_buffer = NULL;
+ usb_free_urb(data->iin_urb);
+ data->iin_urb = NULL;
+ kref_put(&data->kref, usbtmc_delete);
+}
+
+static int usbtmc_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usbtmc_device_data *data;
+ struct usb_host_interface *iface_desc;
+ struct usb_endpoint_descriptor *bulk_in, *bulk_out, *int_in;
+ int retcode;
+
+ dev_dbg(&intf->dev, "%s called\n", __func__);
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->intf = intf;
+ data->id = id;
+ data->usb_dev = usb_get_dev(interface_to_usbdev(intf));
+ usb_set_intfdata(intf, data);
+ kref_init(&data->kref);
+ mutex_init(&data->io_mutex);
+ init_waitqueue_head(&data->waitq);
+ atomic_set(&data->iin_data_valid, 0);
+ INIT_LIST_HEAD(&data->file_list);
+ spin_lock_init(&data->dev_lock);
+
+ data->zombie = 0;
+
+ /* Initialize USBTMC bTag and other fields */
+ data->bTag = 1;
+ /* 2 <= bTag <= 127 USBTMC-USB488 subclass specification 4.3.1 */
+ data->iin_bTag = 2;
+
+ /* USBTMC devices have only one setting, so use that */
+ iface_desc = data->intf->cur_altsetting;
+ data->ifnum = iface_desc->desc.bInterfaceNumber;
+
+ /* Find bulk endpoints */
+ retcode = usb_find_common_endpoints(iface_desc,
+ &bulk_in, &bulk_out, NULL, NULL);
+ if (retcode) {
+ dev_err(&intf->dev, "bulk endpoints not found\n");
+ goto err_put;
+ }
+
+ retcode = -EINVAL;
+ data->bulk_in = bulk_in->bEndpointAddress;
+ data->wMaxPacketSize = usb_endpoint_maxp(bulk_in);
+ if (!data->wMaxPacketSize)
+ goto err_put;
+ dev_dbg(&intf->dev, "Found bulk in endpoint at %u\n", data->bulk_in);
+
+ data->bulk_out = bulk_out->bEndpointAddress;
+ dev_dbg(&intf->dev, "Found Bulk out endpoint at %u\n", data->bulk_out);
+
+ /* Find int endpoint */
+ retcode = usb_find_int_in_endpoint(iface_desc, &int_in);
+ if (!retcode) {
+ data->iin_ep_present = 1;
+ data->iin_ep = int_in->bEndpointAddress;
+ data->iin_wMaxPacketSize = usb_endpoint_maxp(int_in);
+ data->iin_interval = int_in->bInterval;
+ dev_dbg(&intf->dev, "Found Int in endpoint at %u\n",
+ data->iin_ep);
+ }
+
+ retcode = get_capabilities(data);
+ if (retcode)
+ dev_err(&intf->dev, "can't read capabilities\n");
+
+ if (data->iin_ep_present) {
+ /* allocate int urb */
+ data->iin_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!data->iin_urb) {
+ retcode = -ENOMEM;
+ goto error_register;
+ }
+
+ /* Protect interrupt in endpoint data until iin_urb is freed */
+ kref_get(&data->kref);
+
+ /* allocate buffer for interrupt in */
+ data->iin_buffer = kmalloc(data->iin_wMaxPacketSize,
+ GFP_KERNEL);
+ if (!data->iin_buffer) {
+ retcode = -ENOMEM;
+ goto error_register;
+ }
+
+ /* fill interrupt urb */
+ usb_fill_int_urb(data->iin_urb, data->usb_dev,
+ usb_rcvintpipe(data->usb_dev, data->iin_ep),
+ data->iin_buffer, data->iin_wMaxPacketSize,
+ usbtmc_interrupt,
+ data, data->iin_interval);
+
+ retcode = usb_submit_urb(data->iin_urb, GFP_KERNEL);
+ if (retcode) {
+ dev_err(&intf->dev, "Failed to submit iin_urb\n");
+ goto error_register;
+ }
+ }
+
+ retcode = usb_register_dev(intf, &usbtmc_class);
+ if (retcode) {
+ dev_err(&intf->dev, "Not able to get a minor (base %u, slice default): %d\n",
+ USBTMC_MINOR_BASE,
+ retcode);
+ goto error_register;
+ }
+ dev_dbg(&intf->dev, "Using minor number %d\n", intf->minor);
+
+ return 0;
+
+error_register:
+ usbtmc_free_int(data);
+err_put:
+ kref_put(&data->kref, usbtmc_delete);
+ return retcode;
+}
+
+static void usbtmc_disconnect(struct usb_interface *intf)
+{
+ struct usbtmc_device_data *data = usb_get_intfdata(intf);
+ struct list_head *elem;
+
+ usb_deregister_dev(intf, &usbtmc_class);
+ mutex_lock(&data->io_mutex);
+ data->zombie = 1;
+ wake_up_interruptible_all(&data->waitq);
+ list_for_each(elem, &data->file_list) {
+ struct usbtmc_file_data *file_data;
+
+ file_data = list_entry(elem,
+ struct usbtmc_file_data,
+ file_elem);
+ usb_kill_anchored_urbs(&file_data->submitted);
+ usb_scuttle_anchored_urbs(&file_data->in_anchor);
+ }
+ mutex_unlock(&data->io_mutex);
+ usbtmc_free_int(data);
+ kref_put(&data->kref, usbtmc_delete);
+}
+
+static void usbtmc_draw_down(struct usbtmc_file_data *file_data)
+{
+ int time;
+
+ time = usb_wait_anchor_empty_timeout(&file_data->submitted, 1000);
+ if (!time)
+ usb_kill_anchored_urbs(&file_data->submitted);
+ usb_scuttle_anchored_urbs(&file_data->in_anchor);
+}
+
+static int usbtmc_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct usbtmc_device_data *data = usb_get_intfdata(intf);
+ struct list_head *elem;
+
+ if (!data)
+ return 0;
+
+ mutex_lock(&data->io_mutex);
+ list_for_each(elem, &data->file_list) {
+ struct usbtmc_file_data *file_data;
+
+ file_data = list_entry(elem,
+ struct usbtmc_file_data,
+ file_elem);
+ usbtmc_draw_down(file_data);
+ }
+
+ if (data->iin_ep_present && data->iin_urb)
+ usb_kill_urb(data->iin_urb);
+
+ mutex_unlock(&data->io_mutex);
+ return 0;
+}
+
+static int usbtmc_resume(struct usb_interface *intf)
+{
+ struct usbtmc_device_data *data = usb_get_intfdata(intf);
+ int retcode = 0;
+
+ if (data->iin_ep_present && data->iin_urb)
+ retcode = usb_submit_urb(data->iin_urb, GFP_KERNEL);
+ if (retcode)
+ dev_err(&intf->dev, "Failed to submit iin_urb\n");
+
+ return retcode;
+}
+
+static int usbtmc_pre_reset(struct usb_interface *intf)
+{
+ struct usbtmc_device_data *data = usb_get_intfdata(intf);
+ struct list_head *elem;
+
+ if (!data)
+ return 0;
+
+ mutex_lock(&data->io_mutex);
+
+ list_for_each(elem, &data->file_list) {
+ struct usbtmc_file_data *file_data;
+
+ file_data = list_entry(elem,
+ struct usbtmc_file_data,
+ file_elem);
+ usbtmc_ioctl_cancel_io(file_data);
+ }
+
+ return 0;
+}
+
+static int usbtmc_post_reset(struct usb_interface *intf)
+{
+ struct usbtmc_device_data *data = usb_get_intfdata(intf);
+
+ mutex_unlock(&data->io_mutex);
+
+ return 0;
+}
+
+static struct usb_driver usbtmc_driver = {
+ .name = "usbtmc",
+ .id_table = usbtmc_devices,
+ .probe = usbtmc_probe,
+ .disconnect = usbtmc_disconnect,
+ .suspend = usbtmc_suspend,
+ .resume = usbtmc_resume,
+ .pre_reset = usbtmc_pre_reset,
+ .post_reset = usbtmc_post_reset,
+ .dev_groups = usbtmc_groups,
+};
+
+module_usb_driver(usbtmc_driver);
+
+MODULE_LICENSE("GPL");