9 files changed, 2071 insertions, 0 deletions

diff --git a/drivers/usb/common/Kconfig b/drivers/usb/common/Kconfig
new file mode 100644
index 000000000..b85662243
--- /dev/null
+++ b/drivers/usb/common/Kconfig
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config USB_COMMON
+	tristate
+
+
+config USB_LED_TRIG
+	bool "USB LED Triggers"
+	depends on LEDS_CLASS && USB_COMMON && LEDS_TRIGGERS
+	help
+	  This option adds LED triggers for USB host and/or gadget activity.
+
+	  Say Y here if you are working on a system with led-class supported
+	  LEDs and you want to use them as activity indicators for USB host or
+	  gadget.
+
+config USB_ULPI_BUS
+	tristate "USB ULPI PHY interface support"
+	select USB_COMMON
+	help
+	  UTMI+ Low Pin Interface (ULPI) is specification for a commonly used
+	  USB 2.0 PHY interface. The ULPI specification defines a standard set
+	  of registers that can be used to detect the vendor and product which
+	  allows ULPI to be handled as a bus. This module is the driver for that
+	  bus.
+
+	  The ULPI interfaces (the buses) are registered by the drivers for USB
+	  controllers which support ULPI register access and have ULPI PHY
+	  attached to them. The ULPI PHY drivers themselves are normal PHY
+	  drivers.
+
+	  ULPI PHYs provide often functions such as ADP sensing/probing (OTG
+	  protocol) and USB charger detection.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called ulpi.
+
+config USB_CONN_GPIO
+	tristate "USB GPIO Based Connection Detection Driver"
+	depends on GPIOLIB
+	select USB_ROLE_SWITCH
+	select POWER_SUPPLY
+	help
+	  The driver supports USB role switch between host and device via GPIO
+	  based USB cable detection, used typically if an input GPIO is used
+	  to detect USB ID pin, and another input GPIO may be also used to detect
+	  Vbus pin at the same time, it also can be used to enable/disable
+	  device if an input GPIO is only used to detect Vbus pin.
+
+	  To compile the driver as a module, choose M here: the module will
+	  be called usb-conn-gpio.ko
diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile
new file mode 100644
index 000000000..8ac4d21ef
--- /dev/null
+++ b/drivers/usb/common/Makefile
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the usb common parts.
+#
+
+obj-$(CONFIG_USB_COMMON)	  += usb-common.o
+usb-common-y			  += common.o
+usb-common-$(CONFIG_TRACING)	  += debug.o
+usb-common-$(CONFIG_USB_LED_TRIG) += led.o
+
+obj-$(CONFIG_USB_CONN_GPIO)	+= usb-conn-gpio.o
+obj-$(CONFIG_USB_OTG_FSM) += usb-otg-fsm.o
+obj-$(CONFIG_USB_ULPI_BUS)	+= ulpi.o
diff --git a/drivers/usb/common/common.c b/drivers/usb/common/common.c
new file mode 100644
index 000000000..c9bdeb4dd
--- /dev/null
+++ b/drivers/usb/common/common.c
@@ -0,0 +1,435 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Provides code common for host and device side USB.
+ *
+ * If either host side (ie. CONFIG_USB=y) or device side USB stack
+ * (ie. CONFIG_USB_GADGET=y) is compiled in the kernel, this module is
+ * compiled-in as well.  Otherwise, if either of the two stacks is
+ * compiled as module, this file is compiled as module as well.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
+#include <linux/of_platform.h>
+#include <linux/debugfs.h>
+#include "common.h"
+
+static const char *const ep_type_names[] = {
+	[USB_ENDPOINT_XFER_CONTROL] = "ctrl",
+	[USB_ENDPOINT_XFER_ISOC] = "isoc",
+	[USB_ENDPOINT_XFER_BULK] = "bulk",
+	[USB_ENDPOINT_XFER_INT] = "intr",
+};
+
+/**
+ * usb_ep_type_string() - Returns human readable-name of the endpoint type.
+ * @ep_type: The endpoint type to return human-readable name for.  If it's not
+ *   any of the types: USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT},
+ *   usually got by usb_endpoint_type(), the string 'unknown' will be returned.
+ */
+const char *usb_ep_type_string(int ep_type)
+{
+	if (ep_type < 0 || ep_type >= ARRAY_SIZE(ep_type_names))
+		return "unknown";
+
+	return ep_type_names[ep_type];
+}
+EXPORT_SYMBOL_GPL(usb_ep_type_string);
+
+const char *usb_otg_state_string(enum usb_otg_state state)
+{
+	static const char *const names[] = {
+		[OTG_STATE_A_IDLE] = "a_idle",
+		[OTG_STATE_A_WAIT_VRISE] = "a_wait_vrise",
+		[OTG_STATE_A_WAIT_BCON] = "a_wait_bcon",
+		[OTG_STATE_A_HOST] = "a_host",
+		[OTG_STATE_A_SUSPEND] = "a_suspend",
+		[OTG_STATE_A_PERIPHERAL] = "a_peripheral",
+		[OTG_STATE_A_WAIT_VFALL] = "a_wait_vfall",
+		[OTG_STATE_A_VBUS_ERR] = "a_vbus_err",
+		[OTG_STATE_B_IDLE] = "b_idle",
+		[OTG_STATE_B_SRP_INIT] = "b_srp_init",
+		[OTG_STATE_B_PERIPHERAL] = "b_peripheral",
+		[OTG_STATE_B_WAIT_ACON] = "b_wait_acon",
+		[OTG_STATE_B_HOST] = "b_host",
+	};
+
+	if (state < 0 || state >= ARRAY_SIZE(names))
+		return "UNDEFINED";
+
+	return names[state];
+}
+EXPORT_SYMBOL_GPL(usb_otg_state_string);
+
+static const char *const speed_names[] = {
+	[USB_SPEED_UNKNOWN] = "UNKNOWN",
+	[USB_SPEED_LOW] = "low-speed",
+	[USB_SPEED_FULL] = "full-speed",
+	[USB_SPEED_HIGH] = "high-speed",
+	[USB_SPEED_WIRELESS] = "wireless",
+	[USB_SPEED_SUPER] = "super-speed",
+	[USB_SPEED_SUPER_PLUS] = "super-speed-plus",
+};
+
+static const char *const ssp_rate[] = {
+	[USB_SSP_GEN_UNKNOWN] = "UNKNOWN",
+	[USB_SSP_GEN_2x1] = "super-speed-plus-gen2x1",
+	[USB_SSP_GEN_1x2] = "super-speed-plus-gen1x2",
+	[USB_SSP_GEN_2x2] = "super-speed-plus-gen2x2",
+};
+
+/**
+ * usb_speed_string() - Returns human readable-name of the speed.
+ * @speed: The speed to return human-readable name for.  If it's not
+ *   any of the speeds defined in usb_device_speed enum, string for
+ *   USB_SPEED_UNKNOWN will be returned.
+ */
+const char *usb_speed_string(enum usb_device_speed speed)
+{
+	if (speed < 0 || speed >= ARRAY_SIZE(speed_names))
+		speed = USB_SPEED_UNKNOWN;
+	return speed_names[speed];
+}
+EXPORT_SYMBOL_GPL(usb_speed_string);
+
+/**
+ * usb_get_maximum_speed - Get maximum requested speed for a given USB
+ * controller.
+ * @dev: Pointer to the given USB controller device
+ *
+ * The function gets the maximum speed string from property "maximum-speed",
+ * and returns the corresponding enum usb_device_speed.
+ */
+enum usb_device_speed usb_get_maximum_speed(struct device *dev)
+{
+	const char *maximum_speed;
+	int ret;
+
+	ret = device_property_read_string(dev, "maximum-speed", &maximum_speed);
+	if (ret < 0)
+		return USB_SPEED_UNKNOWN;
+
+	ret = match_string(ssp_rate, ARRAY_SIZE(ssp_rate), maximum_speed);
+	if (ret > 0)
+		return USB_SPEED_SUPER_PLUS;
+
+	ret = match_string(speed_names, ARRAY_SIZE(speed_names), maximum_speed);
+	return (ret < 0) ? USB_SPEED_UNKNOWN : ret;
+}
+EXPORT_SYMBOL_GPL(usb_get_maximum_speed);
+
+/**
+ * usb_get_maximum_ssp_rate - Get the signaling rate generation and lane count
+ *	of a SuperSpeed Plus capable device.
+ * @dev: Pointer to the given USB controller device
+ *
+ * If the string from "maximum-speed" property is super-speed-plus-genXxY where
+ * 'X' is the generation number and 'Y' is the number of lanes, then this
+ * function returns the corresponding enum usb_ssp_rate.
+ */
+enum usb_ssp_rate usb_get_maximum_ssp_rate(struct device *dev)
+{
+	const char *maximum_speed;
+	int ret;
+
+	ret = device_property_read_string(dev, "maximum-speed", &maximum_speed);
+	if (ret < 0)
+		return USB_SSP_GEN_UNKNOWN;
+
+	ret = match_string(ssp_rate, ARRAY_SIZE(ssp_rate), maximum_speed);
+	return (ret < 0) ? USB_SSP_GEN_UNKNOWN : ret;
+}
+EXPORT_SYMBOL_GPL(usb_get_maximum_ssp_rate);
+
+/**
+ * usb_state_string - Returns human readable name for the state.
+ * @state: The state to return a human-readable name for. If it's not
+ *	any of the states devices in usb_device_state_string enum,
+ *	the string UNKNOWN will be returned.
+ */
+const char *usb_state_string(enum usb_device_state state)
+{
+	static const char *const names[] = {
+		[USB_STATE_NOTATTACHED] = "not attached",
+		[USB_STATE_ATTACHED] = "attached",
+		[USB_STATE_POWERED] = "powered",
+		[USB_STATE_RECONNECTING] = "reconnecting",
+		[USB_STATE_UNAUTHENTICATED] = "unauthenticated",
+		[USB_STATE_DEFAULT] = "default",
+		[USB_STATE_ADDRESS] = "addressed",
+		[USB_STATE_CONFIGURED] = "configured",
+		[USB_STATE_SUSPENDED] = "suspended",
+	};
+
+	if (state < 0 || state >= ARRAY_SIZE(names))
+		return "UNKNOWN";
+
+	return names[state];
+}
+EXPORT_SYMBOL_GPL(usb_state_string);
+
+static const char *const usb_dr_modes[] = {
+	[USB_DR_MODE_UNKNOWN]		= "",
+	[USB_DR_MODE_HOST]		= "host",
+	[USB_DR_MODE_PERIPHERAL]	= "peripheral",
+	[USB_DR_MODE_OTG]		= "otg",
+};
+
+static enum usb_dr_mode usb_get_dr_mode_from_string(const char *str)
+{
+	int ret;
+
+	ret = match_string(usb_dr_modes, ARRAY_SIZE(usb_dr_modes), str);
+	return (ret < 0) ? USB_DR_MODE_UNKNOWN : ret;
+}
+
+enum usb_dr_mode usb_get_dr_mode(struct device *dev)
+{
+	const char *dr_mode;
+	int err;
+
+	err = device_property_read_string(dev, "dr_mode", &dr_mode);
+	if (err < 0)
+		return USB_DR_MODE_UNKNOWN;
+
+	return usb_get_dr_mode_from_string(dr_mode);
+}
+EXPORT_SYMBOL_GPL(usb_get_dr_mode);
+
+/**
+ * usb_get_role_switch_default_mode - Get default mode for given device
+ * @dev: Pointer to the given device
+ *
+ * The function gets string from property 'role-switch-default-mode',
+ * and returns the corresponding enum usb_dr_mode.
+ */
+enum usb_dr_mode usb_get_role_switch_default_mode(struct device *dev)
+{
+	const char *str;
+	int ret;
+
+	ret = device_property_read_string(dev, "role-switch-default-mode", &str);
+	if (ret < 0)
+		return USB_DR_MODE_UNKNOWN;
+
+	return usb_get_dr_mode_from_string(str);
+}
+EXPORT_SYMBOL_GPL(usb_get_role_switch_default_mode);
+
+/**
+ * usb_decode_interval - Decode bInterval into the time expressed in 1us unit
+ * @epd: The descriptor of the endpoint
+ * @speed: The speed that the endpoint works as
+ *
+ * Function returns the interval expressed in 1us unit for servicing
+ * endpoint for data transfers.
+ */
+unsigned int usb_decode_interval(const struct usb_endpoint_descriptor *epd,
+				 enum usb_device_speed speed)
+{
+	unsigned int interval = 0;
+
+	switch (usb_endpoint_type(epd)) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		/* uframes per NAK */
+		if (speed == USB_SPEED_HIGH)
+			interval = epd->bInterval;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		interval = 1 << (epd->bInterval - 1);
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		/* uframes per NAK */
+		if (speed == USB_SPEED_HIGH && usb_endpoint_dir_out(epd))
+			interval = epd->bInterval;
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		if (speed >= USB_SPEED_HIGH)
+			interval = 1 << (epd->bInterval - 1);
+		else
+			interval = epd->bInterval;
+		break;
+	}
+
+	interval *= (speed >= USB_SPEED_HIGH) ? 125 : 1000;
+
+	return interval;
+}
+EXPORT_SYMBOL_GPL(usb_decode_interval);
+
+#ifdef CONFIG_OF
+/**
+ * of_usb_get_dr_mode_by_phy - Get dual role mode for the controller device
+ * which is associated with the given phy device_node
+ * @np:	Pointer to the given phy device_node
+ * @arg0: phandle args[0] for phy's with #phy-cells >= 1, or -1 for
+ *        phys which do not have phy-cells
+ *
+ * In dts a usb controller associates with phy devices.  The function gets
+ * the string from property 'dr_mode' of the controller associated with the
+ * given phy device node, and returns the correspondig enum usb_dr_mode.
+ */
+enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *np, int arg0)
+{
+	struct device_node *controller = NULL;
+	struct of_phandle_args args;
+	const char *dr_mode;
+	int index;
+	int err;
+
+	do {
+		controller = of_find_node_with_property(controller, "phys");
+		if (!of_device_is_available(controller))
+			continue;
+		index = 0;
+		do {
+			if (arg0 == -1) {
+				args.np = of_parse_phandle(controller, "phys",
+							index);
+				args.args_count = 0;
+			} else {
+				err = of_parse_phandle_with_args(controller,
+							"phys", "#phy-cells",
+							index, &args);
+				if (err)
+					break;
+			}
+
+			of_node_put(args.np);
+			if (args.np == np && (args.args_count == 0 ||
+					      args.args[0] == arg0))
+				goto finish;
+			index++;
+		} while (args.np);
+	} while (controller);
+
+finish:
+	err = of_property_read_string(controller, "dr_mode", &dr_mode);
+	of_node_put(controller);
+
+	if (err < 0)
+		return USB_DR_MODE_UNKNOWN;
+
+	return usb_get_dr_mode_from_string(dr_mode);
+}
+EXPORT_SYMBOL_GPL(of_usb_get_dr_mode_by_phy);
+
+/**
+ * of_usb_host_tpl_support - to get if Targeted Peripheral List is supported
+ * for given targeted hosts (non-PC hosts)
+ * @np: Pointer to the given device_node
+ *
+ * The function gets if the targeted hosts support TPL or not
+ */
+bool of_usb_host_tpl_support(struct device_node *np)
+{
+	return of_property_read_bool(np, "tpl-support");
+}
+EXPORT_SYMBOL_GPL(of_usb_host_tpl_support);
+
+/**
+ * of_usb_update_otg_caps - to update usb otg capabilities according to
+ * the passed properties in DT.
+ * @np: Pointer to the given device_node
+ * @otg_caps: Pointer to the target usb_otg_caps to be set
+ *
+ * The function updates the otg capabilities
+ */
+int of_usb_update_otg_caps(struct device_node *np,
+			struct usb_otg_caps *otg_caps)
+{
+	u32 otg_rev;
+
+	if (!otg_caps)
+		return -EINVAL;
+
+	if (!of_property_read_u32(np, "otg-rev", &otg_rev)) {
+		switch (otg_rev) {
+		case 0x0100:
+		case 0x0120:
+		case 0x0130:
+		case 0x0200:
+			/* Choose the lesser one if it's already been set */
+			if (otg_caps->otg_rev)
+				otg_caps->otg_rev = min_t(u16, otg_rev,
+							otg_caps->otg_rev);
+			else
+				otg_caps->otg_rev = otg_rev;
+			break;
+		default:
+			pr_err("%pOF: unsupported otg-rev: 0x%x\n",
+						np, otg_rev);
+			return -EINVAL;
+		}
+	} else {
+		/*
+		 * otg-rev is mandatory for otg properties, if not passed
+		 * we set it to be 0 and assume it's a legacy otg device.
+		 * Non-dt platform can set it afterwards.
+		 */
+		otg_caps->otg_rev = 0;
+	}
+
+	if (of_property_read_bool(np, "hnp-disable"))
+		otg_caps->hnp_support = false;
+	if (of_property_read_bool(np, "srp-disable"))
+		otg_caps->srp_support = false;
+	if (of_property_read_bool(np, "adp-disable") ||
+				(otg_caps->otg_rev < 0x0200))
+		otg_caps->adp_support = false;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(of_usb_update_otg_caps);
+
+/**
+ * usb_of_get_companion_dev - Find the companion device
+ * @dev: the device pointer to find a companion
+ *
+ * Find the companion device from platform bus.
+ *
+ * Takes a reference to the returned struct device which needs to be dropped
+ * after use.
+ *
+ * Return: On success, a pointer to the companion device, %NULL on failure.
+ */
+struct device *usb_of_get_companion_dev(struct device *dev)
+{
+	struct device_node *node;
+	struct platform_device *pdev = NULL;
+
+	node = of_parse_phandle(dev->of_node, "companion", 0);
+	if (node)
+		pdev = of_find_device_by_node(node);
+
+	of_node_put(node);
+
+	return pdev ? &pdev->dev : NULL;
+}
+EXPORT_SYMBOL_GPL(usb_of_get_companion_dev);
+#endif
+
+struct dentry *usb_debug_root;
+EXPORT_SYMBOL_GPL(usb_debug_root);
+
+static int __init usb_common_init(void)
+{
+	usb_debug_root = debugfs_create_dir("usb", NULL);
+	ledtrig_usb_init();
+	return 0;
+}
+
+static void __exit usb_common_exit(void)
+{
+	ledtrig_usb_exit();
+	debugfs_remove_recursive(usb_debug_root);
+}
+
+subsys_initcall(usb_common_init);
+module_exit(usb_common_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/common/common.h b/drivers/usb/common/common.h
new file mode 100644
index 000000000..424a91316
--- /dev/null
+++ b/drivers/usb/common/common.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __LINUX_USB_COMMON_H
+#define __LINUX_USB_COMMON_H
+
+#if defined(CONFIG_USB_LED_TRIG)
+void ledtrig_usb_init(void);
+void ledtrig_usb_exit(void);
+#else
+static inline void ledtrig_usb_init(void) { }
+static inline void ledtrig_usb_exit(void) { }
+#endif
+
+#endif	/* __LINUX_USB_COMMON_H */
diff --git a/drivers/usb/common/debug.c b/drivers/usb/common/debug.c
new file mode 100644
index 000000000..f204cec8d
--- /dev/null
+++ b/drivers/usb/common/debug.c
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common USB debugging functions
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ */
+
+#include <linux/kernel.h>
+#include <linux/usb/ch9.h>
+
+static void usb_decode_get_status(__u8 bRequestType, __u16 wIndex,
+				  __u16 wLength, char *str, size_t size)
+{
+	switch (bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		snprintf(str, size, "Get Device Status(Length = %d)", wLength);
+		break;
+	case USB_RECIP_INTERFACE:
+		snprintf(str, size,
+			 "Get Interface Status(Intf = %d, Length = %d)",
+			 wIndex, wLength);
+		break;
+	case USB_RECIP_ENDPOINT:
+		snprintf(str, size, "Get Endpoint Status(ep%d%s)",
+			 wIndex & ~USB_DIR_IN,
+			 wIndex & USB_DIR_IN ? "in" : "out");
+		break;
+	}
+}
+
+static const char *usb_decode_device_feature(u16 wValue)
+{
+	switch (wValue) {
+	case USB_DEVICE_SELF_POWERED:
+		return "Self Powered";
+	case USB_DEVICE_REMOTE_WAKEUP:
+		return "Remote Wakeup";
+	case USB_DEVICE_TEST_MODE:
+		return "Test Mode";
+	case USB_DEVICE_U1_ENABLE:
+		return "U1 Enable";
+	case USB_DEVICE_U2_ENABLE:
+		return "U2 Enable";
+	case USB_DEVICE_LTM_ENABLE:
+		return "LTM Enable";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+static const char *usb_decode_test_mode(u16 wIndex)
+{
+	switch (wIndex) {
+	case USB_TEST_J:
+		return ": TEST_J";
+	case USB_TEST_K:
+		return ": TEST_K";
+	case USB_TEST_SE0_NAK:
+		return ": TEST_SE0_NAK";
+	case USB_TEST_PACKET:
+		return ": TEST_PACKET";
+	case USB_TEST_FORCE_ENABLE:
+		return ": TEST_FORCE_EN";
+	default:
+		return ": UNKNOWN";
+	}
+}
+
+static void usb_decode_set_clear_feature(__u8 bRequestType,
+					 __u8 bRequest, __u16 wValue,
+					 __u16 wIndex, char *str, size_t size)
+{
+	switch (bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		snprintf(str, size, "%s Device Feature(%s%s)",
+			 bRequest == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set",
+			 usb_decode_device_feature(wValue),
+			 wValue == USB_DEVICE_TEST_MODE ?
+			 usb_decode_test_mode(wIndex) : "");
+		break;
+	case USB_RECIP_INTERFACE:
+		snprintf(str, size, "%s Interface Feature(%s)",
+			 bRequest == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set",
+			 wValue == USB_INTRF_FUNC_SUSPEND ?
+			 "Function Suspend" : "UNKNOWN");
+		break;
+	case USB_RECIP_ENDPOINT:
+		snprintf(str, size, "%s Endpoint Feature(%s ep%d%s)",
+			 bRequest == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set",
+			 wValue == USB_ENDPOINT_HALT ? "Halt" : "UNKNOWN",
+			 wIndex & ~USB_DIR_IN,
+			 wIndex & USB_DIR_IN ? "in" : "out");
+		break;
+	}
+}
+
+static void usb_decode_set_address(__u16 wValue, char *str, size_t size)
+{
+	snprintf(str, size, "Set Address(Addr = %02x)", wValue);
+}
+
+static void usb_decode_get_set_descriptor(__u8 bRequestType, __u8 bRequest,
+					  __u16 wValue, __u16 wIndex,
+					  __u16 wLength, char *str, size_t size)
+{
+	char *s;
+
+	switch (wValue >> 8) {
+	case USB_DT_DEVICE:
+		s = "Device";
+		break;
+	case USB_DT_CONFIG:
+		s = "Configuration";
+		break;
+	case USB_DT_STRING:
+		s = "String";
+		break;
+	case USB_DT_INTERFACE:
+		s = "Interface";
+		break;
+	case USB_DT_ENDPOINT:
+		s = "Endpoint";
+		break;
+	case USB_DT_DEVICE_QUALIFIER:
+		s = "Device Qualifier";
+		break;
+	case USB_DT_OTHER_SPEED_CONFIG:
+		s = "Other Speed Config";
+		break;
+	case USB_DT_INTERFACE_POWER:
+		s = "Interface Power";
+		break;
+	case USB_DT_OTG:
+		s = "OTG";
+		break;
+	case USB_DT_DEBUG:
+		s = "Debug";
+		break;
+	case USB_DT_INTERFACE_ASSOCIATION:
+		s = "Interface Association";
+		break;
+	case USB_DT_BOS:
+		s = "BOS";
+		break;
+	case USB_DT_DEVICE_CAPABILITY:
+		s = "Device Capability";
+		break;
+	case USB_DT_PIPE_USAGE:
+		s = "Pipe Usage";
+		break;
+	case USB_DT_SS_ENDPOINT_COMP:
+		s = "SS Endpoint Companion";
+		break;
+	case USB_DT_SSP_ISOC_ENDPOINT_COMP:
+		s = "SSP Isochronous Endpoint Companion";
+		break;
+	default:
+		s = "UNKNOWN";
+		break;
+	}
+
+	snprintf(str, size, "%s %s Descriptor(Index = %d, Length = %d)",
+		bRequest == USB_REQ_GET_DESCRIPTOR ? "Get" : "Set",
+		s, wValue & 0xff, wLength);
+}
+
+static void usb_decode_get_configuration(__u16 wLength, char *str, size_t size)
+{
+	snprintf(str, size, "Get Configuration(Length = %d)", wLength);
+}
+
+static void usb_decode_set_configuration(__u8 wValue, char *str, size_t size)
+{
+	snprintf(str, size, "Set Configuration(Config = %d)", wValue);
+}
+
+static void usb_decode_get_intf(__u16 wIndex, __u16 wLength, char *str,
+				size_t size)
+{
+	snprintf(str, size, "Get Interface(Intf = %d, Length = %d)",
+		 wIndex, wLength);
+}
+
+static void usb_decode_set_intf(__u8 wValue, __u16 wIndex, char *str,
+				size_t size)
+{
+	snprintf(str, size, "Set Interface(Intf = %d, Alt.Setting = %d)",
+		 wIndex, wValue);
+}
+
+static void usb_decode_synch_frame(__u16 wIndex, __u16 wLength,
+				   char *str, size_t size)
+{
+	snprintf(str, size, "Synch Frame(Endpoint = %d, Length = %d)",
+		 wIndex, wLength);
+}
+
+static void usb_decode_set_sel(__u16 wLength, char *str, size_t size)
+{
+	snprintf(str, size, "Set SEL(Length = %d)", wLength);
+}
+
+static void usb_decode_set_isoch_delay(__u8 wValue, char *str, size_t size)
+{
+	snprintf(str, size, "Set Isochronous Delay(Delay = %d ns)", wValue);
+}
+
+static void usb_decode_ctrl_generic(char *str, size_t size, __u8 bRequestType,
+				    __u8 bRequest, __u16 wValue, __u16 wIndex,
+				    __u16 wLength)
+{
+	u8 recip = bRequestType & USB_RECIP_MASK;
+	u8 type = bRequestType & USB_TYPE_MASK;
+
+	snprintf(str, size,
+		 "Type=%s Recipient=%s Dir=%s bRequest=%u wValue=%u wIndex=%u wLength=%u",
+		 (type == USB_TYPE_STANDARD)    ? "Standard" :
+		 (type == USB_TYPE_VENDOR)      ? "Vendor" :
+		 (type == USB_TYPE_CLASS)       ? "Class" : "Unknown",
+		 (recip == USB_RECIP_DEVICE)    ? "Device" :
+		 (recip == USB_RECIP_INTERFACE) ? "Interface" :
+		 (recip == USB_RECIP_ENDPOINT)  ? "Endpoint" : "Unknown",
+		 (bRequestType & USB_DIR_IN)    ? "IN" : "OUT",
+		 bRequest, wValue, wIndex, wLength);
+}
+
+static void usb_decode_ctrl_standard(char *str, size_t size, __u8 bRequestType,
+				     __u8 bRequest, __u16 wValue, __u16 wIndex,
+				     __u16 wLength)
+{
+	switch (bRequest) {
+	case USB_REQ_GET_STATUS:
+		usb_decode_get_status(bRequestType, wIndex, wLength, str, size);
+		break;
+	case USB_REQ_CLEAR_FEATURE:
+	case USB_REQ_SET_FEATURE:
+		usb_decode_set_clear_feature(bRequestType, bRequest, wValue,
+					     wIndex, str, size);
+		break;
+	case USB_REQ_SET_ADDRESS:
+		usb_decode_set_address(wValue, str, size);
+		break;
+	case USB_REQ_GET_DESCRIPTOR:
+	case USB_REQ_SET_DESCRIPTOR:
+		usb_decode_get_set_descriptor(bRequestType, bRequest, wValue,
+					      wIndex, wLength, str, size);
+		break;
+	case USB_REQ_GET_CONFIGURATION:
+		usb_decode_get_configuration(wLength, str, size);
+		break;
+	case USB_REQ_SET_CONFIGURATION:
+		usb_decode_set_configuration(wValue, str, size);
+		break;
+	case USB_REQ_GET_INTERFACE:
+		usb_decode_get_intf(wIndex, wLength, str, size);
+		break;
+	case USB_REQ_SET_INTERFACE:
+		usb_decode_set_intf(wValue, wIndex, str, size);
+		break;
+	case USB_REQ_SYNCH_FRAME:
+		usb_decode_synch_frame(wIndex, wLength, str, size);
+		break;
+	case USB_REQ_SET_SEL:
+		usb_decode_set_sel(wLength, str, size);
+		break;
+	case USB_REQ_SET_ISOCH_DELAY:
+		usb_decode_set_isoch_delay(wValue, str, size);
+		break;
+	default:
+		usb_decode_ctrl_generic(str, size, bRequestType, bRequest,
+					wValue, wIndex, wLength);
+		break;
+	}
+}
+
+/**
+ * usb_decode_ctrl - Returns human readable representation of control request.
+ * @str: buffer to return a human-readable representation of control request.
+ *       This buffer should have about 200 bytes.
+ * @size: size of str buffer.
+ * @bRequestType: matches the USB bmRequestType field
+ * @bRequest: matches the USB bRequest field
+ * @wValue: matches the USB wValue field (CPU byte order)
+ * @wIndex: matches the USB wIndex field (CPU byte order)
+ * @wLength: matches the USB wLength field (CPU byte order)
+ *
+ * Function returns decoded, formatted and human-readable description of
+ * control request packet.
+ *
+ * The usage scenario for this is for tracepoints, so function as a return
+ * use the same value as in parameters. This approach allows to use this
+ * function in TP_printk
+ *
+ * Important: wValue, wIndex, wLength parameters before invoking this function
+ * should be processed by le16_to_cpu macro.
+ */
+const char *usb_decode_ctrl(char *str, size_t size, __u8 bRequestType,
+			    __u8 bRequest, __u16 wValue, __u16 wIndex,
+			    __u16 wLength)
+{
+	switch (bRequestType & USB_TYPE_MASK) {
+	case USB_TYPE_STANDARD:
+		usb_decode_ctrl_standard(str, size, bRequestType, bRequest,
+					 wValue, wIndex, wLength);
+		break;
+	case USB_TYPE_VENDOR:
+	case USB_TYPE_CLASS:
+	default:
+		usb_decode_ctrl_generic(str, size, bRequestType, bRequest,
+					wValue, wIndex, wLength);
+		break;
+	}
+
+	return str;
+}
+EXPORT_SYMBOL_GPL(usb_decode_ctrl);
diff --git a/drivers/usb/common/led.c b/drivers/usb/common/led.c
new file mode 100644
index 000000000..0865dd44a
--- /dev/null
+++ b/drivers/usb/common/led.c
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * LED Triggers for USB Activity
+ *
+ * Copyright 2014 Michal Sojka <sojka@merica.cz>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include <linux/usb.h>
+#include "common.h"
+
+#define BLINK_DELAY 30
+
+static unsigned long usb_blink_delay = BLINK_DELAY;
+
+DEFINE_LED_TRIGGER(ledtrig_usb_gadget);
+DEFINE_LED_TRIGGER(ledtrig_usb_host);
+
+void usb_led_activity(enum usb_led_event ev)
+{
+	struct led_trigger *trig = NULL;
+
+	switch (ev) {
+	case USB_LED_EVENT_GADGET:
+		trig = ledtrig_usb_gadget;
+		break;
+	case USB_LED_EVENT_HOST:
+		trig = ledtrig_usb_host;
+		break;
+	}
+	/* led_trigger_blink_oneshot() handles trig == NULL gracefully */
+	led_trigger_blink_oneshot(trig, &usb_blink_delay, &usb_blink_delay, 0);
+}
+EXPORT_SYMBOL_GPL(usb_led_activity);
+
+
+void __init ledtrig_usb_init(void)
+{
+	led_trigger_register_simple("usb-gadget", &ledtrig_usb_gadget);
+	led_trigger_register_simple("usb-host", &ledtrig_usb_host);
+}
+
+void __exit ledtrig_usb_exit(void)
+{
+	led_trigger_unregister_simple(ledtrig_usb_gadget);
+	led_trigger_unregister_simple(ledtrig_usb_host);
+}
diff --git a/drivers/usb/common/ulpi.c b/drivers/usb/common/ulpi.c
new file mode 100644
index 000000000..38703781e
--- /dev/null
+++ b/drivers/usb/common/ulpi.c
@@ -0,0 +1,380 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ulpi.c - USB ULPI PHY bus
+ *
+ * Copyright (C) 2015 Intel Corporation
+ *
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ */
+
+#include <linux/ulpi/interface.h>
+#include <linux/ulpi/driver.h>
+#include <linux/ulpi/regs.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/acpi.h>
+#include <linux/debugfs.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/clk/clk-conf.h>
+
+/* -------------------------------------------------------------------------- */
+
+int ulpi_read(struct ulpi *ulpi, u8 addr)
+{
+	return ulpi->ops->read(ulpi->dev.parent, addr);
+}
+EXPORT_SYMBOL_GPL(ulpi_read);
+
+int ulpi_write(struct ulpi *ulpi, u8 addr, u8 val)
+{
+	return ulpi->ops->write(ulpi->dev.parent, addr, val);
+}
+EXPORT_SYMBOL_GPL(ulpi_write);
+
+/* -------------------------------------------------------------------------- */
+
+static int ulpi_match(struct device *dev, struct device_driver *driver)
+{
+	struct ulpi_driver *drv = to_ulpi_driver(driver);
+	struct ulpi *ulpi = to_ulpi_dev(dev);
+	const struct ulpi_device_id *id;
+
+	/*
+	 * Some ULPI devices don't have a vendor id
+	 * or provide an id_table so rely on OF match.
+	 */
+	if (ulpi->id.vendor == 0 || !drv->id_table)
+		return of_driver_match_device(dev, driver);
+
+	for (id = drv->id_table; id->vendor; id++)
+		if (id->vendor == ulpi->id.vendor &&
+		    id->product == ulpi->id.product)
+			return 1;
+
+	return 0;
+}
+
+static int ulpi_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct ulpi *ulpi = to_ulpi_dev(dev);
+	int ret;
+
+	ret = of_device_uevent_modalias(dev, env);
+	if (ret != -ENODEV)
+		return ret;
+
+	if (add_uevent_var(env, "MODALIAS=ulpi:v%04xp%04x",
+			   ulpi->id.vendor, ulpi->id.product))
+		return -ENOMEM;
+	return 0;
+}
+
+static int ulpi_probe(struct device *dev)
+{
+	struct ulpi_driver *drv = to_ulpi_driver(dev->driver);
+	int ret;
+
+	ret = of_clk_set_defaults(dev->of_node, false);
+	if (ret < 0)
+		return ret;
+
+	return drv->probe(to_ulpi_dev(dev));
+}
+
+static void ulpi_remove(struct device *dev)
+{
+	struct ulpi_driver *drv = to_ulpi_driver(dev->driver);
+
+	if (drv->remove)
+		drv->remove(to_ulpi_dev(dev));
+}
+
+static struct bus_type ulpi_bus = {
+	.name = "ulpi",
+	.match = ulpi_match,
+	.uevent = ulpi_uevent,
+	.probe = ulpi_probe,
+	.remove = ulpi_remove,
+};
+
+/* -------------------------------------------------------------------------- */
+
+static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	int len;
+	struct ulpi *ulpi = to_ulpi_dev(dev);
+
+	len = of_device_modalias(dev, buf, PAGE_SIZE);
+	if (len != -ENODEV)
+		return len;
+
+	return sprintf(buf, "ulpi:v%04xp%04x\n",
+		       ulpi->id.vendor, ulpi->id.product);
+}
+static DEVICE_ATTR_RO(modalias);
+
+static struct attribute *ulpi_dev_attrs[] = {
+	&dev_attr_modalias.attr,
+	NULL
+};
+
+static const struct attribute_group ulpi_dev_attr_group = {
+	.attrs = ulpi_dev_attrs,
+};
+
+static const struct attribute_group *ulpi_dev_attr_groups[] = {
+	&ulpi_dev_attr_group,
+	NULL
+};
+
+static void ulpi_dev_release(struct device *dev)
+{
+	of_node_put(dev->of_node);
+	kfree(to_ulpi_dev(dev));
+}
+
+static const struct device_type ulpi_dev_type = {
+	.name = "ulpi_device",
+	.groups = ulpi_dev_attr_groups,
+	.release = ulpi_dev_release,
+};
+
+/* -------------------------------------------------------------------------- */
+
+/**
+ * __ulpi_register_driver - register a driver with the ULPI bus
+ * @drv: driver being registered
+ * @module: ends up being THIS_MODULE
+ *
+ * Registers a driver with the ULPI bus.
+ */
+int __ulpi_register_driver(struct ulpi_driver *drv, struct module *module)
+{
+	if (!drv->probe)
+		return -EINVAL;
+
+	drv->driver.owner = module;
+	drv->driver.bus = &ulpi_bus;
+
+	return driver_register(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(__ulpi_register_driver);
+
+/**
+ * ulpi_unregister_driver - unregister a driver with the ULPI bus
+ * @drv: driver to unregister
+ *
+ * Unregisters a driver with the ULPI bus.
+ */
+void ulpi_unregister_driver(struct ulpi_driver *drv)
+{
+	driver_unregister(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(ulpi_unregister_driver);
+
+/* -------------------------------------------------------------------------- */
+
+static int ulpi_of_register(struct ulpi *ulpi)
+{
+	struct device_node *np = NULL, *child;
+	struct device *parent;
+
+	/* Find a ulpi bus underneath the parent or the grandparent */
+	parent = ulpi->dev.parent;
+	if (parent->of_node)
+		np = of_get_child_by_name(parent->of_node, "ulpi");
+	else if (parent->parent && parent->parent->of_node)
+		np = of_get_child_by_name(parent->parent->of_node, "ulpi");
+	if (!np)
+		return 0;
+
+	child = of_get_next_available_child(np, NULL);
+	of_node_put(np);
+	if (!child)
+		return -EINVAL;
+
+	ulpi->dev.of_node = child;
+
+	return 0;
+}
+
+static int ulpi_read_id(struct ulpi *ulpi)
+{
+	int ret;
+
+	/* Test the interface */
+	ret = ulpi_write(ulpi, ULPI_SCRATCH, 0xaa);
+	if (ret < 0)
+		goto err;
+
+	ret = ulpi_read(ulpi, ULPI_SCRATCH);
+	if (ret < 0)
+		return ret;
+
+	if (ret != 0xaa)
+		goto err;
+
+	ulpi->id.vendor = ulpi_read(ulpi, ULPI_VENDOR_ID_LOW);
+	ulpi->id.vendor |= ulpi_read(ulpi, ULPI_VENDOR_ID_HIGH) << 8;
+
+	ulpi->id.product = ulpi_read(ulpi, ULPI_PRODUCT_ID_LOW);
+	ulpi->id.product |= ulpi_read(ulpi, ULPI_PRODUCT_ID_HIGH) << 8;
+
+	/* Some ULPI devices don't have a vendor id so rely on OF match */
+	if (ulpi->id.vendor == 0)
+		goto err;
+
+	request_module("ulpi:v%04xp%04x", ulpi->id.vendor, ulpi->id.product);
+	return 0;
+err:
+	of_device_request_module(&ulpi->dev);
+	return 0;
+}
+
+static int ulpi_regs_show(struct seq_file *seq, void *data)
+{
+	struct ulpi *ulpi = seq->private;
+
+#define ulpi_print(name, reg) do { \
+	int ret = ulpi_read(ulpi, reg); \
+	if (ret < 0) \
+		return ret; \
+	seq_printf(seq, name " %.02x\n", ret); \
+} while (0)
+
+	ulpi_print("Vendor ID Low               ", ULPI_VENDOR_ID_LOW);
+	ulpi_print("Vendor ID High              ", ULPI_VENDOR_ID_HIGH);
+	ulpi_print("Product ID Low              ", ULPI_PRODUCT_ID_LOW);
+	ulpi_print("Product ID High             ", ULPI_PRODUCT_ID_HIGH);
+	ulpi_print("Function Control            ", ULPI_FUNC_CTRL);
+	ulpi_print("Interface Control           ", ULPI_IFC_CTRL);
+	ulpi_print("OTG Control                 ", ULPI_OTG_CTRL);
+	ulpi_print("USB Interrupt Enable Rising ", ULPI_USB_INT_EN_RISE);
+	ulpi_print("USB Interrupt Enable Falling", ULPI_USB_INT_EN_FALL);
+	ulpi_print("USB Interrupt Status        ", ULPI_USB_INT_STS);
+	ulpi_print("USB Interrupt Latch         ", ULPI_USB_INT_LATCH);
+	ulpi_print("Debug                       ", ULPI_DEBUG);
+	ulpi_print("Scratch Register            ", ULPI_SCRATCH);
+	ulpi_print("Carkit Control              ", ULPI_CARKIT_CTRL);
+	ulpi_print("Carkit Interrupt Delay      ", ULPI_CARKIT_INT_DELAY);
+	ulpi_print("Carkit Interrupt Enable     ", ULPI_CARKIT_INT_EN);
+	ulpi_print("Carkit Interrupt Status     ", ULPI_CARKIT_INT_STS);
+	ulpi_print("Carkit Interrupt Latch      ", ULPI_CARKIT_INT_LATCH);
+	ulpi_print("Carkit Pulse Control        ", ULPI_CARKIT_PLS_CTRL);
+	ulpi_print("Transmit Positive Width     ", ULPI_TX_POS_WIDTH);
+	ulpi_print("Transmit Negative Width     ", ULPI_TX_NEG_WIDTH);
+	ulpi_print("Receive Polarity Recovery   ", ULPI_POLARITY_RECOVERY);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(ulpi_regs);
+
+static struct dentry *ulpi_root;
+
+static int ulpi_register(struct device *dev, struct ulpi *ulpi)
+{
+	int ret;
+	struct dentry *root;
+
+	ulpi->dev.parent = dev; /* needed early for ops */
+	ulpi->dev.bus = &ulpi_bus;
+	ulpi->dev.type = &ulpi_dev_type;
+	dev_set_name(&ulpi->dev, "%s.ulpi", dev_name(dev));
+
+	ACPI_COMPANION_SET(&ulpi->dev, ACPI_COMPANION(dev));
+
+	ret = ulpi_of_register(ulpi);
+	if (ret)
+		return ret;
+
+	ret = ulpi_read_id(ulpi);
+	if (ret) {
+		of_node_put(ulpi->dev.of_node);
+		return ret;
+	}
+
+	ret = device_register(&ulpi->dev);
+	if (ret) {
+		put_device(&ulpi->dev);
+		return ret;
+	}
+
+	root = debugfs_create_dir(dev_name(dev), ulpi_root);
+	debugfs_create_file("regs", 0444, root, ulpi, &ulpi_regs_fops);
+
+	dev_dbg(&ulpi->dev, "registered ULPI PHY: vendor %04x, product %04x\n",
+		ulpi->id.vendor, ulpi->id.product);
+
+	return 0;
+}
+
+/**
+ * ulpi_register_interface - instantiate new ULPI device
+ * @dev: USB controller's device interface
+ * @ops: ULPI register access
+ *
+ * Allocates and registers a ULPI device and an interface for it. Called from
+ * the USB controller that provides the ULPI interface.
+ */
+struct ulpi *ulpi_register_interface(struct device *dev,
+				     const struct ulpi_ops *ops)
+{
+	struct ulpi *ulpi;
+	int ret;
+
+	ulpi = kzalloc(sizeof(*ulpi), GFP_KERNEL);
+	if (!ulpi)
+		return ERR_PTR(-ENOMEM);
+
+	ulpi->ops = ops;
+
+	ret = ulpi_register(dev, ulpi);
+	if (ret) {
+		kfree(ulpi);
+		return ERR_PTR(ret);
+	}
+
+	return ulpi;
+}
+EXPORT_SYMBOL_GPL(ulpi_register_interface);
+
+/**
+ * ulpi_unregister_interface - unregister ULPI interface
+ * @ulpi: struct ulpi_interface
+ *
+ * Unregisters a ULPI device and it's interface that was created with
+ * ulpi_create_interface().
+ */
+void ulpi_unregister_interface(struct ulpi *ulpi)
+{
+	debugfs_lookup_and_remove(dev_name(&ulpi->dev), ulpi_root);
+	device_unregister(&ulpi->dev);
+}
+EXPORT_SYMBOL_GPL(ulpi_unregister_interface);
+
+/* -------------------------------------------------------------------------- */
+
+static int __init ulpi_init(void)
+{
+	int ret;
+
+	ulpi_root = debugfs_create_dir(KBUILD_MODNAME, NULL);
+	ret = bus_register(&ulpi_bus);
+	if (ret)
+		debugfs_remove(ulpi_root);
+	return ret;
+}
+subsys_initcall(ulpi_init);
+
+static void __exit ulpi_exit(void)
+{
+	bus_unregister(&ulpi_bus);
+	debugfs_remove(ulpi_root);
+}
+module_exit(ulpi_exit);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("USB ULPI PHY bus");
diff --git a/drivers/usb/common/usb-conn-gpio.c b/drivers/usb/common/usb-conn-gpio.c
new file mode 100644
index 000000000..3f5180d64
--- /dev/null
+++ b/drivers/usb/common/usb-conn-gpio.c
@@ -0,0 +1,357 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB GPIO Based Connection Detection Driver
+ *
+ * Copyright (C) 2019 MediaTek Inc.
+ *
+ * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
+ *
+ * Some code borrowed from drivers/extcon/extcon-usb-gpio.c
+ */
+
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb/role.h>
+
+#define USB_GPIO_DEB_MS		20	/* ms */
+#define USB_GPIO_DEB_US		((USB_GPIO_DEB_MS) * 1000)	/* us */
+
+#define USB_CONN_IRQF	\
+	(IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT)
+
+struct usb_conn_info {
+	struct device *dev;
+	struct usb_role_switch *role_sw;
+	enum usb_role last_role;
+	struct regulator *vbus;
+	struct delayed_work dw_det;
+	unsigned long debounce_jiffies;
+
+	struct gpio_desc *id_gpiod;
+	struct gpio_desc *vbus_gpiod;
+	int id_irq;
+	int vbus_irq;
+
+	struct power_supply_desc desc;
+	struct power_supply *charger;
+	bool initial_detection;
+};
+
+/*
+ * "DEVICE" = VBUS and "HOST" = !ID, so we have:
+ * Both "DEVICE" and "HOST" can't be set as active at the same time
+ * so if "HOST" is active (i.e. ID is 0)  we keep "DEVICE" inactive
+ * even if VBUS is on.
+ *
+ *  Role          |   ID  |  VBUS
+ * ------------------------------------
+ *  [1] DEVICE    |   H   |   H
+ *  [2] NONE      |   H   |   L
+ *  [3] HOST      |   L   |   H
+ *  [4] HOST      |   L   |   L
+ *
+ * In case we have only one of these signals:
+ * - VBUS only - we want to distinguish between [1] and [2], so ID is always 1
+ * - ID only - we want to distinguish between [1] and [4], so VBUS = ID
+ */
+static void usb_conn_detect_cable(struct work_struct *work)
+{
+	struct usb_conn_info *info;
+	enum usb_role role;
+	int id, vbus, ret;
+
+	info = container_of(to_delayed_work(work),
+			    struct usb_conn_info, dw_det);
+
+	/* check ID and VBUS */
+	id = info->id_gpiod ?
+		gpiod_get_value_cansleep(info->id_gpiod) : 1;
+	vbus = info->vbus_gpiod ?
+		gpiod_get_value_cansleep(info->vbus_gpiod) : id;
+
+	if (!id)
+		role = USB_ROLE_HOST;
+	else if (vbus)
+		role = USB_ROLE_DEVICE;
+	else
+		role = USB_ROLE_NONE;
+
+	dev_dbg(info->dev, "role %s -> %s, gpios: id %d, vbus %d\n",
+		usb_role_string(info->last_role), usb_role_string(role), id, vbus);
+
+	if (!info->initial_detection && info->last_role == role) {
+		dev_warn(info->dev, "repeated role: %s\n", usb_role_string(role));
+		return;
+	}
+
+	info->initial_detection = false;
+
+	if (info->last_role == USB_ROLE_HOST && info->vbus)
+		regulator_disable(info->vbus);
+
+	ret = usb_role_switch_set_role(info->role_sw, role);
+	if (ret)
+		dev_err(info->dev, "failed to set role: %d\n", ret);
+
+	if (role == USB_ROLE_HOST && info->vbus) {
+		ret = regulator_enable(info->vbus);
+		if (ret)
+			dev_err(info->dev, "enable vbus regulator failed\n");
+	}
+
+	info->last_role = role;
+
+	if (info->vbus)
+		dev_dbg(info->dev, "vbus regulator is %s\n",
+			regulator_is_enabled(info->vbus) ? "enabled" : "disabled");
+
+	power_supply_changed(info->charger);
+}
+
+static void usb_conn_queue_dwork(struct usb_conn_info *info,
+				 unsigned long delay)
+{
+	queue_delayed_work(system_power_efficient_wq, &info->dw_det, delay);
+}
+
+static irqreturn_t usb_conn_isr(int irq, void *dev_id)
+{
+	struct usb_conn_info *info = dev_id;
+
+	usb_conn_queue_dwork(info, info->debounce_jiffies);
+
+	return IRQ_HANDLED;
+}
+
+static enum power_supply_property usb_charger_properties[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static int usb_charger_get_property(struct power_supply *psy,
+				    enum power_supply_property psp,
+				    union power_supply_propval *val)
+{
+	struct usb_conn_info *info = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = info->last_role == USB_ROLE_DEVICE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int usb_conn_psy_register(struct usb_conn_info *info)
+{
+	struct device *dev = info->dev;
+	struct power_supply_desc *desc = &info->desc;
+	struct power_supply_config cfg = {
+		.of_node = dev->of_node,
+	};
+
+	desc->name = "usb-charger";
+	desc->properties = usb_charger_properties;
+	desc->num_properties = ARRAY_SIZE(usb_charger_properties);
+	desc->get_property = usb_charger_get_property;
+	desc->type = POWER_SUPPLY_TYPE_USB;
+	cfg.drv_data = info;
+
+	info->charger = devm_power_supply_register(dev, desc, &cfg);
+	if (IS_ERR(info->charger))
+		dev_err(dev, "Unable to register charger\n");
+
+	return PTR_ERR_OR_ZERO(info->charger);
+}
+
+static int usb_conn_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct usb_conn_info *info;
+	int ret = 0;
+
+	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->dev = dev;
+	info->id_gpiod = devm_gpiod_get_optional(dev, "id", GPIOD_IN);
+	if (IS_ERR(info->id_gpiod))
+		return PTR_ERR(info->id_gpiod);
+
+	info->vbus_gpiod = devm_gpiod_get_optional(dev, "vbus", GPIOD_IN);
+	if (IS_ERR(info->vbus_gpiod))
+		return PTR_ERR(info->vbus_gpiod);
+
+	if (!info->id_gpiod && !info->vbus_gpiod) {
+		dev_err(dev, "failed to get gpios\n");
+		return -ENODEV;
+	}
+
+	if (info->id_gpiod)
+		ret = gpiod_set_debounce(info->id_gpiod, USB_GPIO_DEB_US);
+	if (!ret && info->vbus_gpiod)
+		ret = gpiod_set_debounce(info->vbus_gpiod, USB_GPIO_DEB_US);
+	if (ret < 0)
+		info->debounce_jiffies = msecs_to_jiffies(USB_GPIO_DEB_MS);
+
+	INIT_DELAYED_WORK(&info->dw_det, usb_conn_detect_cable);
+
+	info->vbus = devm_regulator_get_optional(dev, "vbus");
+	if (PTR_ERR(info->vbus) == -ENODEV)
+		info->vbus = NULL;
+
+	if (IS_ERR(info->vbus))
+		return dev_err_probe(dev, PTR_ERR(info->vbus), "failed to get vbus\n");
+
+	info->role_sw = usb_role_switch_get(dev);
+	if (IS_ERR(info->role_sw))
+		return dev_err_probe(dev, PTR_ERR(info->role_sw),
+				     "failed to get role switch\n");
+
+	ret = usb_conn_psy_register(info);
+	if (ret)
+		goto put_role_sw;
+
+	if (info->id_gpiod) {
+		info->id_irq = gpiod_to_irq(info->id_gpiod);
+		if (info->id_irq < 0) {
+			dev_err(dev, "failed to get ID IRQ\n");
+			ret = info->id_irq;
+			goto put_role_sw;
+		}
+
+		ret = devm_request_threaded_irq(dev, info->id_irq, NULL,
+						usb_conn_isr, USB_CONN_IRQF,
+						pdev->name, info);
+		if (ret < 0) {
+			dev_err(dev, "failed to request ID IRQ\n");
+			goto put_role_sw;
+		}
+	}
+
+	if (info->vbus_gpiod) {
+		info->vbus_irq = gpiod_to_irq(info->vbus_gpiod);
+		if (info->vbus_irq < 0) {
+			dev_err(dev, "failed to get VBUS IRQ\n");
+			ret = info->vbus_irq;
+			goto put_role_sw;
+		}
+
+		ret = devm_request_threaded_irq(dev, info->vbus_irq, NULL,
+						usb_conn_isr, USB_CONN_IRQF,
+						pdev->name, info);
+		if (ret < 0) {
+			dev_err(dev, "failed to request VBUS IRQ\n");
+			goto put_role_sw;
+		}
+	}
+
+	platform_set_drvdata(pdev, info);
+	device_set_wakeup_capable(&pdev->dev, true);
+
+	/* Perform initial detection */
+	info->initial_detection = true;
+	usb_conn_queue_dwork(info, 0);
+
+	return 0;
+
+put_role_sw:
+	usb_role_switch_put(info->role_sw);
+	return ret;
+}
+
+static int usb_conn_remove(struct platform_device *pdev)
+{
+	struct usb_conn_info *info = platform_get_drvdata(pdev);
+
+	cancel_delayed_work_sync(&info->dw_det);
+
+	if (info->last_role == USB_ROLE_HOST && info->vbus)
+		regulator_disable(info->vbus);
+
+	usb_role_switch_put(info->role_sw);
+
+	return 0;
+}
+
+static int __maybe_unused usb_conn_suspend(struct device *dev)
+{
+	struct usb_conn_info *info = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev)) {
+		if (info->id_gpiod)
+			enable_irq_wake(info->id_irq);
+		if (info->vbus_gpiod)
+			enable_irq_wake(info->vbus_irq);
+		return 0;
+	}
+
+	if (info->id_gpiod)
+		disable_irq(info->id_irq);
+	if (info->vbus_gpiod)
+		disable_irq(info->vbus_irq);
+
+	pinctrl_pm_select_sleep_state(dev);
+
+	return 0;
+}
+
+static int __maybe_unused usb_conn_resume(struct device *dev)
+{
+	struct usb_conn_info *info = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev)) {
+		if (info->id_gpiod)
+			disable_irq_wake(info->id_irq);
+		if (info->vbus_gpiod)
+			disable_irq_wake(info->vbus_irq);
+		return 0;
+	}
+
+	pinctrl_pm_select_default_state(dev);
+
+	if (info->id_gpiod)
+		enable_irq(info->id_irq);
+	if (info->vbus_gpiod)
+		enable_irq(info->vbus_irq);
+
+	usb_conn_queue_dwork(info, 0);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(usb_conn_pm_ops,
+			 usb_conn_suspend, usb_conn_resume);
+
+static const struct of_device_id usb_conn_dt_match[] = {
+	{ .compatible = "gpio-usb-b-connector", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, usb_conn_dt_match);
+
+static struct platform_driver usb_conn_driver = {
+	.probe		= usb_conn_probe,
+	.remove		= usb_conn_remove,
+	.driver		= {
+		.name	= "usb-conn-gpio",
+		.pm	= &usb_conn_pm_ops,
+		.of_match_table = usb_conn_dt_match,
+	},
+};
+
+module_platform_driver(usb_conn_driver);
+
+MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>");
+MODULE_DESCRIPTION("USB GPIO based connection detection driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/common/usb-otg-fsm.c b/drivers/usb/common/usb-otg-fsm.c
new file mode 100644
index 000000000..0697fde51
--- /dev/null
+++ b/drivers/usb/common/usb-otg-fsm.c
@@ -0,0 +1,452 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * OTG Finite State Machine from OTG spec
+ *
+ * Copyright (C) 2007,2008 Freescale Semiconductor, Inc.
+ *
+ * Author:	Li Yang <LeoLi@freescale.com>
+ *		Jerry Huang <Chang-Ming.Huang@freescale.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/usb.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/otg-fsm.h>
+
+#ifdef VERBOSE
+#define VDBG(fmt, args...) pr_debug("[%s]  " fmt, \
+				 __func__, ## args)
+#else
+#define VDBG(stuff...)	do {} while (0)
+#endif
+
+/* Change USB protocol when there is a protocol change */
+static int otg_set_protocol(struct otg_fsm *fsm, int protocol)
+{
+	int ret = 0;
+
+	if (fsm->protocol != protocol) {
+		VDBG("Changing role fsm->protocol= %d; new protocol= %d\n",
+			fsm->protocol, protocol);
+		/* stop old protocol */
+		if (fsm->protocol == PROTO_HOST)
+			ret = otg_start_host(fsm, 0);
+		else if (fsm->protocol == PROTO_GADGET)
+			ret = otg_start_gadget(fsm, 0);
+		if (ret)
+			return ret;
+
+		/* start new protocol */
+		if (protocol == PROTO_HOST)
+			ret = otg_start_host(fsm, 1);
+		else if (protocol == PROTO_GADGET)
+			ret = otg_start_gadget(fsm, 1);
+		if (ret)
+			return ret;
+
+		fsm->protocol = protocol;
+		return 0;
+	}
+
+	return 0;
+}
+
+/* Called when leaving a state.  Do state clean up jobs here */
+static void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state)
+{
+	switch (old_state) {
+	case OTG_STATE_B_IDLE:
+		otg_del_timer(fsm, B_SE0_SRP);
+		fsm->b_se0_srp = 0;
+		fsm->adp_sns = 0;
+		fsm->adp_prb = 0;
+		break;
+	case OTG_STATE_B_SRP_INIT:
+		fsm->data_pulse = 0;
+		fsm->b_srp_done = 0;
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		if (fsm->otg->gadget)
+			fsm->otg->gadget->host_request_flag = 0;
+		break;
+	case OTG_STATE_B_WAIT_ACON:
+		otg_del_timer(fsm, B_ASE0_BRST);
+		fsm->b_ase0_brst_tmout = 0;
+		break;
+	case OTG_STATE_B_HOST:
+		break;
+	case OTG_STATE_A_IDLE:
+		fsm->adp_prb = 0;
+		break;
+	case OTG_STATE_A_WAIT_VRISE:
+		otg_del_timer(fsm, A_WAIT_VRISE);
+		fsm->a_wait_vrise_tmout = 0;
+		break;
+	case OTG_STATE_A_WAIT_BCON:
+		otg_del_timer(fsm, A_WAIT_BCON);
+		fsm->a_wait_bcon_tmout = 0;
+		break;
+	case OTG_STATE_A_HOST:
+		otg_del_timer(fsm, A_WAIT_ENUM);
+		break;
+	case OTG_STATE_A_SUSPEND:
+		otg_del_timer(fsm, A_AIDL_BDIS);
+		fsm->a_aidl_bdis_tmout = 0;
+		fsm->a_suspend_req_inf = 0;
+		break;
+	case OTG_STATE_A_PERIPHERAL:
+		otg_del_timer(fsm, A_BIDL_ADIS);
+		fsm->a_bidl_adis_tmout = 0;
+		if (fsm->otg->gadget)
+			fsm->otg->gadget->host_request_flag = 0;
+		break;
+	case OTG_STATE_A_WAIT_VFALL:
+		otg_del_timer(fsm, A_WAIT_VFALL);
+		fsm->a_wait_vfall_tmout = 0;
+		otg_del_timer(fsm, A_WAIT_VRISE);
+		break;
+	case OTG_STATE_A_VBUS_ERR:
+		break;
+	default:
+		break;
+	}
+}
+
+static void otg_hnp_polling_work(struct work_struct *work)
+{
+	struct otg_fsm *fsm = container_of(to_delayed_work(work),
+				struct otg_fsm, hnp_polling_work);
+	struct usb_device *udev;
+	enum usb_otg_state state = fsm->otg->state;
+	u8 flag;
+	int retval;
+
+	if (state != OTG_STATE_A_HOST && state != OTG_STATE_B_HOST)
+		return;
+
+	udev = usb_hub_find_child(fsm->otg->host->root_hub, 1);
+	if (!udev) {
+		dev_err(fsm->otg->host->controller,
+			"no usb dev connected, can't start HNP polling\n");
+		return;
+	}
+
+	*fsm->host_req_flag = 0;
+	/* Get host request flag from connected USB device */
+	retval = usb_control_msg(udev,
+				usb_rcvctrlpipe(udev, 0),
+				USB_REQ_GET_STATUS,
+				USB_DIR_IN | USB_RECIP_DEVICE,
+				0,
+				OTG_STS_SELECTOR,
+				fsm->host_req_flag,
+				1,
+				USB_CTRL_GET_TIMEOUT);
+	if (retval != 1) {
+		dev_err(&udev->dev, "Get one byte OTG status failed\n");
+		return;
+	}
+
+	flag = *fsm->host_req_flag;
+	if (flag == 0) {
+		/* Continue HNP polling */
+		schedule_delayed_work(&fsm->hnp_polling_work,
+					msecs_to_jiffies(T_HOST_REQ_POLL));
+		return;
+	} else if (flag != HOST_REQUEST_FLAG) {
+		dev_err(&udev->dev, "host request flag %d is invalid\n", flag);
+		return;
+	}
+
+	/* Host request flag is set */
+	if (state == OTG_STATE_A_HOST) {
+		/* Set b_hnp_enable */
+		if (!fsm->otg->host->b_hnp_enable) {
+			retval = usb_control_msg(udev,
+					usb_sndctrlpipe(udev, 0),
+					USB_REQ_SET_FEATURE, 0,
+					USB_DEVICE_B_HNP_ENABLE,
+					0, NULL, 0,
+					USB_CTRL_SET_TIMEOUT);
+			if (retval >= 0)
+				fsm->otg->host->b_hnp_enable = 1;
+		}
+		fsm->a_bus_req = 0;
+	} else if (state == OTG_STATE_B_HOST) {
+		fsm->b_bus_req = 0;
+	}
+
+	otg_statemachine(fsm);
+}
+
+static void otg_start_hnp_polling(struct otg_fsm *fsm)
+{
+	/*
+	 * The memory of host_req_flag should be allocated by
+	 * controller driver, otherwise, hnp polling is not started.
+	 */
+	if (!fsm->host_req_flag)
+		return;
+
+	if (!fsm->hnp_work_inited) {
+		INIT_DELAYED_WORK(&fsm->hnp_polling_work, otg_hnp_polling_work);
+		fsm->hnp_work_inited = true;
+	}
+
+	schedule_delayed_work(&fsm->hnp_polling_work,
+					msecs_to_jiffies(T_HOST_REQ_POLL));
+}
+
+/* Called when entering a state */
+static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
+{
+	if (fsm->otg->state == new_state)
+		return 0;
+	VDBG("Set state: %s\n", usb_otg_state_string(new_state));
+	otg_leave_state(fsm, fsm->otg->state);
+	switch (new_state) {
+	case OTG_STATE_B_IDLE:
+		otg_drv_vbus(fsm, 0);
+		otg_chrg_vbus(fsm, 0);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 0);
+		/*
+		 * Driver is responsible for starting ADP probing
+		 * if ADP sensing times out.
+		 */
+		otg_start_adp_sns(fsm);
+		otg_set_protocol(fsm, PROTO_UNDEF);
+		otg_add_timer(fsm, B_SE0_SRP);
+		break;
+	case OTG_STATE_B_SRP_INIT:
+		otg_start_pulse(fsm);
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_UNDEF);
+		otg_add_timer(fsm, B_SRP_FAIL);
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		otg_chrg_vbus(fsm, 0);
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_GADGET);
+		otg_loc_conn(fsm, 1);
+		break;
+	case OTG_STATE_B_WAIT_ACON:
+		otg_chrg_vbus(fsm, 0);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_HOST);
+		otg_add_timer(fsm, B_ASE0_BRST);
+		fsm->a_bus_suspend = 0;
+		break;
+	case OTG_STATE_B_HOST:
+		otg_chrg_vbus(fsm, 0);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 1);
+		otg_set_protocol(fsm, PROTO_HOST);
+		usb_bus_start_enum(fsm->otg->host,
+				fsm->otg->host->otg_port);
+		otg_start_hnp_polling(fsm);
+		break;
+	case OTG_STATE_A_IDLE:
+		otg_drv_vbus(fsm, 0);
+		otg_chrg_vbus(fsm, 0);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 0);
+		otg_start_adp_prb(fsm);
+		otg_set_protocol(fsm, PROTO_HOST);
+		break;
+	case OTG_STATE_A_WAIT_VRISE:
+		otg_drv_vbus(fsm, 1);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_HOST);
+		otg_add_timer(fsm, A_WAIT_VRISE);
+		break;
+	case OTG_STATE_A_WAIT_BCON:
+		otg_drv_vbus(fsm, 1);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_HOST);
+		otg_add_timer(fsm, A_WAIT_BCON);
+		break;
+	case OTG_STATE_A_HOST:
+		otg_drv_vbus(fsm, 1);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 1);
+		otg_set_protocol(fsm, PROTO_HOST);
+		/*
+		 * When HNP is triggered while a_bus_req = 0, a_host will
+		 * suspend too fast to complete a_set_b_hnp_en
+		 */
+		if (!fsm->a_bus_req || fsm->a_suspend_req_inf)
+			otg_add_timer(fsm, A_WAIT_ENUM);
+		otg_start_hnp_polling(fsm);
+		break;
+	case OTG_STATE_A_SUSPEND:
+		otg_drv_vbus(fsm, 1);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_HOST);
+		otg_add_timer(fsm, A_AIDL_BDIS);
+
+		break;
+	case OTG_STATE_A_PERIPHERAL:
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_GADGET);
+		otg_drv_vbus(fsm, 1);
+		otg_loc_conn(fsm, 1);
+		otg_add_timer(fsm, A_BIDL_ADIS);
+		break;
+	case OTG_STATE_A_WAIT_VFALL:
+		otg_drv_vbus(fsm, 0);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_HOST);
+		otg_add_timer(fsm, A_WAIT_VFALL);
+		break;
+	case OTG_STATE_A_VBUS_ERR:
+		otg_drv_vbus(fsm, 0);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_UNDEF);
+		break;
+	default:
+		break;
+	}
+
+	fsm->otg->state = new_state;
+	fsm->state_changed = 1;
+	return 0;
+}
+
+/* State change judgement */
+int otg_statemachine(struct otg_fsm *fsm)
+{
+	enum usb_otg_state state;
+
+	mutex_lock(&fsm->lock);
+
+	state = fsm->otg->state;
+	fsm->state_changed = 0;
+	/* State machine state change judgement */
+
+	switch (state) {
+	case OTG_STATE_UNDEFINED:
+		VDBG("fsm->id = %d\n", fsm->id);
+		if (fsm->id)
+			otg_set_state(fsm, OTG_STATE_B_IDLE);
+		else
+			otg_set_state(fsm, OTG_STATE_A_IDLE);
+		break;
+	case OTG_STATE_B_IDLE:
+		if (!fsm->id)
+			otg_set_state(fsm, OTG_STATE_A_IDLE);
+		else if (fsm->b_sess_vld && fsm->otg->gadget)
+			otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
+		else if ((fsm->b_bus_req || fsm->adp_change || fsm->power_up) &&
+				fsm->b_ssend_srp && fsm->b_se0_srp)
+			otg_set_state(fsm, OTG_STATE_B_SRP_INIT);
+		break;
+	case OTG_STATE_B_SRP_INIT:
+		if (!fsm->id || fsm->b_srp_done)
+			otg_set_state(fsm, OTG_STATE_B_IDLE);
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		if (!fsm->id || !fsm->b_sess_vld)
+			otg_set_state(fsm, OTG_STATE_B_IDLE);
+		else if (fsm->b_bus_req && fsm->otg->
+				gadget->b_hnp_enable && fsm->a_bus_suspend)
+			otg_set_state(fsm, OTG_STATE_B_WAIT_ACON);
+		break;
+	case OTG_STATE_B_WAIT_ACON:
+		if (fsm->a_conn)
+			otg_set_state(fsm, OTG_STATE_B_HOST);
+		else if (!fsm->id || !fsm->b_sess_vld)
+			otg_set_state(fsm, OTG_STATE_B_IDLE);
+		else if (fsm->a_bus_resume || fsm->b_ase0_brst_tmout) {
+			fsm->b_ase0_brst_tmout = 0;
+			otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
+		}
+		break;
+	case OTG_STATE_B_HOST:
+		if (!fsm->id || !fsm->b_sess_vld)
+			otg_set_state(fsm, OTG_STATE_B_IDLE);
+		else if (!fsm->b_bus_req || !fsm->a_conn || fsm->test_device)
+			otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
+		break;
+	case OTG_STATE_A_IDLE:
+		if (fsm->id)
+			otg_set_state(fsm, OTG_STATE_B_IDLE);
+		else if (!fsm->a_bus_drop && (fsm->a_bus_req ||
+			  fsm->a_srp_det || fsm->adp_change || fsm->power_up))
+			otg_set_state(fsm, OTG_STATE_A_WAIT_VRISE);
+		break;
+	case OTG_STATE_A_WAIT_VRISE:
+		if (fsm->a_vbus_vld)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
+		else if (fsm->id || fsm->a_bus_drop ||
+				fsm->a_wait_vrise_tmout)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
+		break;
+	case OTG_STATE_A_WAIT_BCON:
+		if (!fsm->a_vbus_vld)
+			otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
+		else if (fsm->b_conn)
+			otg_set_state(fsm, OTG_STATE_A_HOST);
+		else if (fsm->id || fsm->a_bus_drop || fsm->a_wait_bcon_tmout)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
+		break;
+	case OTG_STATE_A_HOST:
+		if (fsm->id || fsm->a_bus_drop)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
+		else if ((!fsm->a_bus_req || fsm->a_suspend_req_inf) &&
+				fsm->otg->host->b_hnp_enable)
+			otg_set_state(fsm, OTG_STATE_A_SUSPEND);
+		else if (!fsm->b_conn)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
+		else if (!fsm->a_vbus_vld)
+			otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
+		break;
+	case OTG_STATE_A_SUSPEND:
+		if (!fsm->b_conn && fsm->otg->host->b_hnp_enable)
+			otg_set_state(fsm, OTG_STATE_A_PERIPHERAL);
+		else if (!fsm->b_conn && !fsm->otg->host->b_hnp_enable)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
+		else if (fsm->a_bus_req || fsm->b_bus_resume)
+			otg_set_state(fsm, OTG_STATE_A_HOST);
+		else if (fsm->id || fsm->a_bus_drop || fsm->a_aidl_bdis_tmout)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
+		else if (!fsm->a_vbus_vld)
+			otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
+		break;
+	case OTG_STATE_A_PERIPHERAL:
+		if (fsm->id || fsm->a_bus_drop)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
+		else if (fsm->a_bidl_adis_tmout || fsm->b_bus_suspend)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
+		else if (!fsm->a_vbus_vld)
+			otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
+		break;
+	case OTG_STATE_A_WAIT_VFALL:
+		if (fsm->a_wait_vfall_tmout)
+			otg_set_state(fsm, OTG_STATE_A_IDLE);
+		break;
+	case OTG_STATE_A_VBUS_ERR:
+		if (fsm->id || fsm->a_bus_drop || fsm->a_clr_err)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
+		break;
+	default:
+		break;
+	}
+	mutex_unlock(&fsm->lock);
+
+	VDBG("quit statemachine, changed = %d\n", fsm->state_changed);
+	return fsm->state_changed;
+}
+EXPORT_SYMBOL_GPL(otg_statemachine);
+MODULE_LICENSE("GPL");