diff options
Diffstat (limited to '')
28 files changed, 26916 insertions, 0 deletions
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig new file mode 100644 index 000000000..351ede4b5 --- /dev/null +++ b/drivers/usb/core/Kconfig @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# USB Core configuration +# +config USB_ANNOUNCE_NEW_DEVICES + bool "USB announce new devices" + help + Say Y here if you want the USB core to always announce the + idVendor, idProduct, Manufacturer, Product, and SerialNumber + strings for every new USB device to the syslog. This option is + usually used by distro vendors to help with debugging and to + let users know what specific device was added to the machine + in what location. + + If you do not want this kind of information sent to the system + log, or have any doubts about this, say N here. + +comment "Miscellaneous USB options" + +config USB_DEFAULT_PERSIST + bool "Enable USB persist by default" + default y + help + Say N here if you don't want USB power session persistence + enabled by default. If you say N it will make suspended USB + devices that lose power get reenumerated as if they had been + unplugged, causing any mounted filesystems to be lost. The + persist feature can still be enabled for individual devices + through the power/persist sysfs node. See + Documentation/driver-api/usb/persist.rst for more info. + + If you have any questions about this, say Y here, only say N + if you know exactly what you are doing. + +config USB_FEW_INIT_RETRIES + bool "Limit USB device initialization to only a few retries" + help + When a new USB device is detected, the kernel tries very hard + to initialize and enumerate it, with lots of nested retry loops. + This almost always works, but when it fails it can take a long time. + This option tells the kernel to make only a few retry attempts, + so that the total time required for a failed initialization is + no more than 30 seconds (as required by the USB OTG spec). + + Say N here unless you require new-device enumeration failure to + occur within 30 seconds (as might be needed in an embedded + application). + +config USB_DYNAMIC_MINORS + bool "Dynamic USB minor allocation" + help + If you say Y here, the USB subsystem will use dynamic minor + allocation for any device that uses the USB major number. + This means that you can have more than 16 of a single type + of device (like USB printers). + + If you are unsure about this, say N here. + +config USB_OTG + bool "OTG support" + depends on PM + help + The most notable feature of USB OTG is support for a + "Dual-Role" device, which can act as either a device + or a host. The initial role is decided by the type of + plug inserted and can be changed later when two dual + role devices talk to each other. + + Select this only if your board has Mini-AB/Micro-AB + connector. + +config USB_OTG_PRODUCTLIST + bool "Rely on OTG and EH Targeted Peripherals List" + depends on USB + help + If you say Y here, the "otg_productlist.h" file will be used as a + product list, so USB peripherals not listed there will be + rejected during enumeration. This behavior is required by the + USB OTG and EH specification for all devices not on your product's + "Targeted Peripherals List". "Embedded Hosts" are likewise + allowed to support only a limited number of peripherals. + +config USB_OTG_DISABLE_EXTERNAL_HUB + bool "Disable external hubs" + depends on USB_OTG || EXPERT + help + If you say Y here, then Linux will refuse to enumerate + external hubs. OTG hosts are allowed to reduce hardware + and software costs by not supporting external hubs. So + are "Embedded Hosts" that don't offer OTG support. + +config USB_OTG_FSM + tristate "USB 2.0 OTG FSM implementation" + depends on USB && USB_OTG + select USB_PHY + help + Implements OTG Finite State Machine as specified in On-The-Go + and Embedded Host Supplement to the USB Revision 2.0 Specification. + +config USB_LEDS_TRIGGER_USBPORT + tristate "USB port LED trigger" + depends on USB && LEDS_TRIGGERS + help + This driver allows LEDs to be controlled by USB events. Enabling this + trigger allows specifying list of USB ports that should turn on LED + when some USB device gets connected. + +config USB_AUTOSUSPEND_DELAY + int "Default autosuspend delay" + depends on USB + default 2 + help + The default autosuspend delay in seconds. Can be overridden + with the usbcore.autosuspend command line or module parameter. + + The default value Linux has always had is 2 seconds. Change + this value if you want a different delay and cannot modify + the command line or module parameter. diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile new file mode 100644 index 000000000..7d338e9c0 --- /dev/null +++ b/drivers/usb/core/Makefile @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for USB Core files and filesystem +# + +usbcore-y := usb.o hub.o hcd.o urb.o message.o driver.o +usbcore-y += config.o file.o buffer.o sysfs.o endpoint.o +usbcore-y += devio.o notify.o generic.o quirks.o devices.o +usbcore-y += phy.o port.o + +usbcore-$(CONFIG_OF) += of.o +usbcore-$(CONFIG_USB_PCI) += hcd-pci.o +usbcore-$(CONFIG_ACPI) += usb-acpi.o + +ifdef CONFIG_USB_ONBOARD_HUB +usbcore-y += ../misc/onboard_usb_hub_pdevs.o +endif + +obj-$(CONFIG_USB) += usbcore.o + +obj-$(CONFIG_USB_LEDS_TRIGGER_USBPORT) += ledtrig-usbport.o diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c new file mode 100644 index 000000000..268ccbec8 --- /dev/null +++ b/drivers/usb/core/buffer.c @@ -0,0 +1,215 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * DMA memory management for framework level HCD code (hc_driver) + * + * This implementation plugs in through generic "usb_bus" level methods, + * and should work with all USB controllers, regardless of bus type. + * + * Released under the GPLv2 only. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/mm.h> +#include <linux/io.h> +#include <linux/dma-mapping.h> +#include <linux/dmapool.h> +#include <linux/genalloc.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> + + +/* + * DMA-Coherent Buffers + */ + +/* FIXME tune these based on pool statistics ... */ +static size_t pool_max[HCD_BUFFER_POOLS] = { + 32, 128, 512, 2048, +}; + +void __init usb_init_pool_max(void) +{ + /* + * The pool_max values must never be smaller than + * ARCH_KMALLOC_MINALIGN. + */ + if (ARCH_KMALLOC_MINALIGN <= 32) + ; /* Original value is okay */ + else if (ARCH_KMALLOC_MINALIGN <= 64) + pool_max[0] = 64; + else if (ARCH_KMALLOC_MINALIGN <= 128) + pool_max[0] = 0; /* Don't use this pool */ + else + BUILD_BUG(); /* We don't allow this */ +} + +/* SETUP primitives */ + +/** + * hcd_buffer_create - initialize buffer pools + * @hcd: the bus whose buffer pools are to be initialized + * + * Context: task context, might sleep + * + * Call this as part of initializing a host controller that uses the dma + * memory allocators. It initializes some pools of dma-coherent memory that + * will be shared by all drivers using that controller. + * + * Call hcd_buffer_destroy() to clean up after using those pools. + * + * Return: 0 if successful. A negative errno value otherwise. + */ +int hcd_buffer_create(struct usb_hcd *hcd) +{ + char name[16]; + int i, size; + + if (hcd->localmem_pool || !hcd_uses_dma(hcd)) + return 0; + + for (i = 0; i < HCD_BUFFER_POOLS; i++) { + size = pool_max[i]; + if (!size) + continue; + snprintf(name, sizeof(name), "buffer-%d", size); + hcd->pool[i] = dma_pool_create(name, hcd->self.sysdev, + size, size, 0); + if (!hcd->pool[i]) { + hcd_buffer_destroy(hcd); + return -ENOMEM; + } + } + return 0; +} + + +/** + * hcd_buffer_destroy - deallocate buffer pools + * @hcd: the bus whose buffer pools are to be destroyed + * + * Context: task context, might sleep + * + * This frees the buffer pools created by hcd_buffer_create(). + */ +void hcd_buffer_destroy(struct usb_hcd *hcd) +{ + int i; + + if (!IS_ENABLED(CONFIG_HAS_DMA)) + return; + + for (i = 0; i < HCD_BUFFER_POOLS; i++) { + dma_pool_destroy(hcd->pool[i]); + hcd->pool[i] = NULL; + } +} + + +/* sometimes alloc/free could use kmalloc with GFP_DMA, for + * better sharing and to leverage mm/slab.c intelligence. + */ + +void *hcd_buffer_alloc( + struct usb_bus *bus, + size_t size, + gfp_t mem_flags, + dma_addr_t *dma +) +{ + struct usb_hcd *hcd = bus_to_hcd(bus); + int i; + + if (size == 0) + return NULL; + + if (hcd->localmem_pool) + return gen_pool_dma_alloc(hcd->localmem_pool, size, dma); + + /* some USB hosts just use PIO */ + if (!hcd_uses_dma(hcd)) { + *dma = ~(dma_addr_t) 0; + return kmalloc(size, mem_flags); + } + + for (i = 0; i < HCD_BUFFER_POOLS; i++) { + if (size <= pool_max[i]) + return dma_pool_alloc(hcd->pool[i], mem_flags, dma); + } + return dma_alloc_coherent(hcd->self.sysdev, size, dma, mem_flags); +} + +void hcd_buffer_free( + struct usb_bus *bus, + size_t size, + void *addr, + dma_addr_t dma +) +{ + struct usb_hcd *hcd = bus_to_hcd(bus); + int i; + + if (!addr) + return; + + if (hcd->localmem_pool) { + gen_pool_free(hcd->localmem_pool, (unsigned long)addr, size); + return; + } + + if (!hcd_uses_dma(hcd)) { + kfree(addr); + return; + } + + for (i = 0; i < HCD_BUFFER_POOLS; i++) { + if (size <= pool_max[i]) { + dma_pool_free(hcd->pool[i], addr, dma); + return; + } + } + dma_free_coherent(hcd->self.sysdev, size, addr, dma); +} + +void *hcd_buffer_alloc_pages(struct usb_hcd *hcd, + size_t size, gfp_t mem_flags, dma_addr_t *dma) +{ + if (size == 0) + return NULL; + + if (hcd->localmem_pool) + return gen_pool_dma_alloc_align(hcd->localmem_pool, + size, dma, PAGE_SIZE); + + /* some USB hosts just use PIO */ + if (!hcd_uses_dma(hcd)) { + *dma = DMA_MAPPING_ERROR; + return (void *)__get_free_pages(mem_flags, + get_order(size)); + } + + return dma_alloc_coherent(hcd->self.sysdev, + size, dma, mem_flags); +} + +void hcd_buffer_free_pages(struct usb_hcd *hcd, + size_t size, void *addr, dma_addr_t dma) +{ + if (!addr) + return; + + if (hcd->localmem_pool) { + gen_pool_free(hcd->localmem_pool, + (unsigned long)addr, size); + return; + } + + if (!hcd_uses_dma(hcd)) { + free_pages((unsigned long)addr, get_order(size)); + return; + } + + dma_free_coherent(hcd->self.sysdev, size, addr, dma); +} diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c new file mode 100644 index 000000000..d396ac8b9 --- /dev/null +++ b/drivers/usb/core/config.c @@ -0,0 +1,1095 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Released under the GPLv2 only. + */ + +#include <linux/usb.h> +#include <linux/usb/ch9.h> +#include <linux/usb/hcd.h> +#include <linux/usb/quirks.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/device.h> +#include <asm/byteorder.h> +#include "usb.h" + + +#define USB_MAXALTSETTING 128 /* Hard limit */ + +#define USB_MAXCONFIG 8 /* Arbitrary limit */ + + +static inline const char *plural(int n) +{ + return (n == 1 ? "" : "s"); +} + +static int find_next_descriptor(unsigned char *buffer, int size, + int dt1, int dt2, int *num_skipped) +{ + struct usb_descriptor_header *h; + int n = 0; + unsigned char *buffer0 = buffer; + + /* Find the next descriptor of type dt1 or dt2 */ + while (size > 0) { + h = (struct usb_descriptor_header *) buffer; + if (h->bDescriptorType == dt1 || h->bDescriptorType == dt2) + break; + buffer += h->bLength; + size -= h->bLength; + ++n; + } + + /* Store the number of descriptors skipped and return the + * number of bytes skipped */ + if (num_skipped) + *num_skipped = n; + return buffer - buffer0; +} + +static void usb_parse_ssp_isoc_endpoint_companion(struct device *ddev, + int cfgno, int inum, int asnum, struct usb_host_endpoint *ep, + unsigned char *buffer, int size) +{ + struct usb_ssp_isoc_ep_comp_descriptor *desc; + + /* + * The SuperSpeedPlus Isoc endpoint companion descriptor immediately + * follows the SuperSpeed Endpoint Companion descriptor + */ + desc = (struct usb_ssp_isoc_ep_comp_descriptor *) buffer; + if (desc->bDescriptorType != USB_DT_SSP_ISOC_ENDPOINT_COMP || + size < USB_DT_SSP_ISOC_EP_COMP_SIZE) { + dev_notice(ddev, "Invalid SuperSpeedPlus isoc endpoint companion" + "for config %d interface %d altsetting %d ep %d.\n", + cfgno, inum, asnum, ep->desc.bEndpointAddress); + return; + } + memcpy(&ep->ssp_isoc_ep_comp, desc, USB_DT_SSP_ISOC_EP_COMP_SIZE); +} + +static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno, + int inum, int asnum, struct usb_host_endpoint *ep, + unsigned char *buffer, int size) +{ + struct usb_ss_ep_comp_descriptor *desc; + int max_tx; + + /* The SuperSpeed endpoint companion descriptor is supposed to + * be the first thing immediately following the endpoint descriptor. + */ + desc = (struct usb_ss_ep_comp_descriptor *) buffer; + + if (desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP || + size < USB_DT_SS_EP_COMP_SIZE) { + dev_notice(ddev, "No SuperSpeed endpoint companion for config %d " + " interface %d altsetting %d ep %d: " + "using minimum values\n", + cfgno, inum, asnum, ep->desc.bEndpointAddress); + + /* Fill in some default values. + * Leave bmAttributes as zero, which will mean no streams for + * bulk, and isoc won't support multiple bursts of packets. + * With bursts of only one packet, and a Mult of 1, the max + * amount of data moved per endpoint service interval is one + * packet. + */ + ep->ss_ep_comp.bLength = USB_DT_SS_EP_COMP_SIZE; + ep->ss_ep_comp.bDescriptorType = USB_DT_SS_ENDPOINT_COMP; + if (usb_endpoint_xfer_isoc(&ep->desc) || + usb_endpoint_xfer_int(&ep->desc)) + ep->ss_ep_comp.wBytesPerInterval = + ep->desc.wMaxPacketSize; + return; + } + buffer += desc->bLength; + size -= desc->bLength; + memcpy(&ep->ss_ep_comp, desc, USB_DT_SS_EP_COMP_SIZE); + + /* Check the various values */ + if (usb_endpoint_xfer_control(&ep->desc) && desc->bMaxBurst != 0) { + dev_notice(ddev, "Control endpoint with bMaxBurst = %d in " + "config %d interface %d altsetting %d ep %d: " + "setting to zero\n", desc->bMaxBurst, + cfgno, inum, asnum, ep->desc.bEndpointAddress); + ep->ss_ep_comp.bMaxBurst = 0; + } else if (desc->bMaxBurst > 15) { + dev_notice(ddev, "Endpoint with bMaxBurst = %d in " + "config %d interface %d altsetting %d ep %d: " + "setting to 15\n", desc->bMaxBurst, + cfgno, inum, asnum, ep->desc.bEndpointAddress); + ep->ss_ep_comp.bMaxBurst = 15; + } + + if ((usb_endpoint_xfer_control(&ep->desc) || + usb_endpoint_xfer_int(&ep->desc)) && + desc->bmAttributes != 0) { + dev_notice(ddev, "%s endpoint with bmAttributes = %d in " + "config %d interface %d altsetting %d ep %d: " + "setting to zero\n", + usb_endpoint_xfer_control(&ep->desc) ? "Control" : "Bulk", + desc->bmAttributes, + cfgno, inum, asnum, ep->desc.bEndpointAddress); + ep->ss_ep_comp.bmAttributes = 0; + } else if (usb_endpoint_xfer_bulk(&ep->desc) && + desc->bmAttributes > 16) { + dev_notice(ddev, "Bulk endpoint with more than 65536 streams in " + "config %d interface %d altsetting %d ep %d: " + "setting to max\n", + cfgno, inum, asnum, ep->desc.bEndpointAddress); + ep->ss_ep_comp.bmAttributes = 16; + } else if (usb_endpoint_xfer_isoc(&ep->desc) && + !USB_SS_SSP_ISOC_COMP(desc->bmAttributes) && + USB_SS_MULT(desc->bmAttributes) > 3) { + dev_notice(ddev, "Isoc endpoint has Mult of %d in " + "config %d interface %d altsetting %d ep %d: " + "setting to 3\n", + USB_SS_MULT(desc->bmAttributes), + cfgno, inum, asnum, ep->desc.bEndpointAddress); + ep->ss_ep_comp.bmAttributes = 2; + } + + if (usb_endpoint_xfer_isoc(&ep->desc)) + max_tx = (desc->bMaxBurst + 1) * + (USB_SS_MULT(desc->bmAttributes)) * + usb_endpoint_maxp(&ep->desc); + else if (usb_endpoint_xfer_int(&ep->desc)) + max_tx = usb_endpoint_maxp(&ep->desc) * + (desc->bMaxBurst + 1); + else + max_tx = 999999; + if (le16_to_cpu(desc->wBytesPerInterval) > max_tx) { + dev_notice(ddev, "%s endpoint with wBytesPerInterval of %d in " + "config %d interface %d altsetting %d ep %d: " + "setting to %d\n", + usb_endpoint_xfer_isoc(&ep->desc) ? "Isoc" : "Int", + le16_to_cpu(desc->wBytesPerInterval), + cfgno, inum, asnum, ep->desc.bEndpointAddress, + max_tx); + ep->ss_ep_comp.wBytesPerInterval = cpu_to_le16(max_tx); + } + /* Parse a possible SuperSpeedPlus isoc ep companion descriptor */ + if (usb_endpoint_xfer_isoc(&ep->desc) && + USB_SS_SSP_ISOC_COMP(desc->bmAttributes)) + usb_parse_ssp_isoc_endpoint_companion(ddev, cfgno, inum, asnum, + ep, buffer, size); +} + +static const unsigned short low_speed_maxpacket_maxes[4] = { + [USB_ENDPOINT_XFER_CONTROL] = 8, + [USB_ENDPOINT_XFER_ISOC] = 0, + [USB_ENDPOINT_XFER_BULK] = 0, + [USB_ENDPOINT_XFER_INT] = 8, +}; +static const unsigned short full_speed_maxpacket_maxes[4] = { + [USB_ENDPOINT_XFER_CONTROL] = 64, + [USB_ENDPOINT_XFER_ISOC] = 1023, + [USB_ENDPOINT_XFER_BULK] = 64, + [USB_ENDPOINT_XFER_INT] = 64, +}; +static const unsigned short high_speed_maxpacket_maxes[4] = { + [USB_ENDPOINT_XFER_CONTROL] = 64, + [USB_ENDPOINT_XFER_ISOC] = 1024, + + /* Bulk should be 512, but some devices use 1024: we will warn below */ + [USB_ENDPOINT_XFER_BULK] = 1024, + [USB_ENDPOINT_XFER_INT] = 1024, +}; +static const unsigned short super_speed_maxpacket_maxes[4] = { + [USB_ENDPOINT_XFER_CONTROL] = 512, + [USB_ENDPOINT_XFER_ISOC] = 1024, + [USB_ENDPOINT_XFER_BULK] = 1024, + [USB_ENDPOINT_XFER_INT] = 1024, +}; + +static bool endpoint_is_duplicate(struct usb_endpoint_descriptor *e1, + struct usb_endpoint_descriptor *e2) +{ + if (e1->bEndpointAddress == e2->bEndpointAddress) + return true; + + if (usb_endpoint_xfer_control(e1) || usb_endpoint_xfer_control(e2)) { + if (usb_endpoint_num(e1) == usb_endpoint_num(e2)) + return true; + } + + return false; +} + +/* + * Check for duplicate endpoint addresses in other interfaces and in the + * altsetting currently being parsed. + */ +static bool config_endpoint_is_duplicate(struct usb_host_config *config, + int inum, int asnum, struct usb_endpoint_descriptor *d) +{ + struct usb_endpoint_descriptor *epd; + struct usb_interface_cache *intfc; + struct usb_host_interface *alt; + int i, j, k; + + for (i = 0; i < config->desc.bNumInterfaces; ++i) { + intfc = config->intf_cache[i]; + + for (j = 0; j < intfc->num_altsetting; ++j) { + alt = &intfc->altsetting[j]; + + if (alt->desc.bInterfaceNumber == inum && + alt->desc.bAlternateSetting != asnum) + continue; + + for (k = 0; k < alt->desc.bNumEndpoints; ++k) { + epd = &alt->endpoint[k].desc; + + if (endpoint_is_duplicate(epd, d)) + return true; + } + } + } + + return false; +} + +static int usb_parse_endpoint(struct device *ddev, int cfgno, + struct usb_host_config *config, int inum, int asnum, + struct usb_host_interface *ifp, int num_ep, + unsigned char *buffer, int size) +{ + struct usb_device *udev = to_usb_device(ddev); + unsigned char *buffer0 = buffer; + struct usb_endpoint_descriptor *d; + struct usb_host_endpoint *endpoint; + int n, i, j, retval; + unsigned int maxp; + const unsigned short *maxpacket_maxes; + + d = (struct usb_endpoint_descriptor *) buffer; + buffer += d->bLength; + size -= d->bLength; + + if (d->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE) + n = USB_DT_ENDPOINT_AUDIO_SIZE; + else if (d->bLength >= USB_DT_ENDPOINT_SIZE) + n = USB_DT_ENDPOINT_SIZE; + else { + dev_notice(ddev, "config %d interface %d altsetting %d has an " + "invalid endpoint descriptor of length %d, skipping\n", + cfgno, inum, asnum, d->bLength); + goto skip_to_next_endpoint_or_interface_descriptor; + } + + i = d->bEndpointAddress & ~USB_ENDPOINT_DIR_MASK; + if (i >= 16 || i == 0) { + dev_notice(ddev, "config %d interface %d altsetting %d has an " + "invalid endpoint with address 0x%X, skipping\n", + cfgno, inum, asnum, d->bEndpointAddress); + goto skip_to_next_endpoint_or_interface_descriptor; + } + + /* Only store as many endpoints as we have room for */ + if (ifp->desc.bNumEndpoints >= num_ep) + goto skip_to_next_endpoint_or_interface_descriptor; + + /* Check for duplicate endpoint addresses */ + if (config_endpoint_is_duplicate(config, inum, asnum, d)) { + dev_notice(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n", + cfgno, inum, asnum, d->bEndpointAddress); + goto skip_to_next_endpoint_or_interface_descriptor; + } + + /* Ignore some endpoints */ + if (udev->quirks & USB_QUIRK_ENDPOINT_IGNORE) { + if (usb_endpoint_is_ignored(udev, ifp, d)) { + dev_notice(ddev, "config %d interface %d altsetting %d has an ignored endpoint with address 0x%X, skipping\n", + cfgno, inum, asnum, + d->bEndpointAddress); + goto skip_to_next_endpoint_or_interface_descriptor; + } + } + + endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints]; + ++ifp->desc.bNumEndpoints; + + memcpy(&endpoint->desc, d, n); + INIT_LIST_HEAD(&endpoint->urb_list); + + /* + * Fix up bInterval values outside the legal range. + * Use 10 or 8 ms if no proper value can be guessed. + */ + i = 0; /* i = min, j = max, n = default */ + j = 255; + if (usb_endpoint_xfer_int(d)) { + i = 1; + switch (udev->speed) { + case USB_SPEED_SUPER_PLUS: + case USB_SPEED_SUPER: + case USB_SPEED_HIGH: + /* + * Many device manufacturers are using full-speed + * bInterval values in high-speed interrupt endpoint + * descriptors. Try to fix those and fall back to an + * 8-ms default value otherwise. + */ + n = fls(d->bInterval*8); + if (n == 0) + n = 7; /* 8 ms = 2^(7-1) uframes */ + j = 16; + + /* + * Adjust bInterval for quirked devices. + */ + /* + * This quirk fixes bIntervals reported in ms. + */ + if (udev->quirks & USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL) { + n = clamp(fls(d->bInterval) + 3, i, j); + i = j = n; + } + /* + * This quirk fixes bIntervals reported in + * linear microframes. + */ + if (udev->quirks & USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL) { + n = clamp(fls(d->bInterval), i, j); + i = j = n; + } + break; + default: /* USB_SPEED_FULL or _LOW */ + /* + * For low-speed, 10 ms is the official minimum. + * But some "overclocked" devices might want faster + * polling so we'll allow it. + */ + n = 10; + break; + } + } else if (usb_endpoint_xfer_isoc(d)) { + i = 1; + j = 16; + switch (udev->speed) { + case USB_SPEED_HIGH: + n = 7; /* 8 ms = 2^(7-1) uframes */ + break; + default: /* USB_SPEED_FULL */ + n = 4; /* 8 ms = 2^(4-1) frames */ + break; + } + } + if (d->bInterval < i || d->bInterval > j) { + dev_notice(ddev, "config %d interface %d altsetting %d " + "endpoint 0x%X has an invalid bInterval %d, " + "changing to %d\n", + cfgno, inum, asnum, + d->bEndpointAddress, d->bInterval, n); + endpoint->desc.bInterval = n; + } + + /* Some buggy low-speed devices have Bulk endpoints, which is + * explicitly forbidden by the USB spec. In an attempt to make + * them usable, we will try treating them as Interrupt endpoints. + */ + if (udev->speed == USB_SPEED_LOW && usb_endpoint_xfer_bulk(d)) { + dev_notice(ddev, "config %d interface %d altsetting %d " + "endpoint 0x%X is Bulk; changing to Interrupt\n", + cfgno, inum, asnum, d->bEndpointAddress); + endpoint->desc.bmAttributes = USB_ENDPOINT_XFER_INT; + endpoint->desc.bInterval = 1; + if (usb_endpoint_maxp(&endpoint->desc) > 8) + endpoint->desc.wMaxPacketSize = cpu_to_le16(8); + } + + /* + * Validate the wMaxPacketSize field. + * Some devices have isochronous endpoints in altsetting 0; + * the USB-2 spec requires such endpoints to have wMaxPacketSize = 0 + * (see the end of section 5.6.3), so don't warn about them. + */ + maxp = le16_to_cpu(endpoint->desc.wMaxPacketSize); + if (maxp == 0 && !(usb_endpoint_xfer_isoc(d) && asnum == 0)) { + dev_notice(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid wMaxPacketSize 0\n", + cfgno, inum, asnum, d->bEndpointAddress); + } + + /* Find the highest legal maxpacket size for this endpoint */ + i = 0; /* additional transactions per microframe */ + switch (udev->speed) { + case USB_SPEED_LOW: + maxpacket_maxes = low_speed_maxpacket_maxes; + break; + case USB_SPEED_FULL: + maxpacket_maxes = full_speed_maxpacket_maxes; + break; + case USB_SPEED_HIGH: + /* Multiple-transactions bits are allowed only for HS periodic endpoints */ + if (usb_endpoint_xfer_int(d) || usb_endpoint_xfer_isoc(d)) { + i = maxp & USB_EP_MAXP_MULT_MASK; + maxp &= ~i; + } + fallthrough; + default: + maxpacket_maxes = high_speed_maxpacket_maxes; + break; + case USB_SPEED_SUPER: + case USB_SPEED_SUPER_PLUS: + maxpacket_maxes = super_speed_maxpacket_maxes; + break; + } + j = maxpacket_maxes[usb_endpoint_type(&endpoint->desc)]; + + if (maxp > j) { + dev_notice(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid maxpacket %d, setting to %d\n", + cfgno, inum, asnum, d->bEndpointAddress, maxp, j); + maxp = j; + endpoint->desc.wMaxPacketSize = cpu_to_le16(i | maxp); + } + + /* + * Some buggy high speed devices have bulk endpoints using + * maxpacket sizes other than 512. High speed HCDs may not + * be able to handle that particular bug, so let's warn... + */ + if (udev->speed == USB_SPEED_HIGH && usb_endpoint_xfer_bulk(d)) { + if (maxp != 512) + dev_notice(ddev, "config %d interface %d altsetting %d " + "bulk endpoint 0x%X has invalid maxpacket %d\n", + cfgno, inum, asnum, d->bEndpointAddress, + maxp); + } + + /* Parse a possible SuperSpeed endpoint companion descriptor */ + if (udev->speed >= USB_SPEED_SUPER) + usb_parse_ss_endpoint_companion(ddev, cfgno, + inum, asnum, endpoint, buffer, size); + + /* Skip over any Class Specific or Vendor Specific descriptors; + * find the next endpoint or interface descriptor */ + endpoint->extra = buffer; + i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT, + USB_DT_INTERFACE, &n); + endpoint->extralen = i; + retval = buffer - buffer0 + i; + if (n > 0) + dev_dbg(ddev, "skipped %d descriptor%s after %s\n", + n, plural(n), "endpoint"); + return retval; + +skip_to_next_endpoint_or_interface_descriptor: + i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT, + USB_DT_INTERFACE, NULL); + return buffer - buffer0 + i; +} + +void usb_release_interface_cache(struct kref *ref) +{ + struct usb_interface_cache *intfc = ref_to_usb_interface_cache(ref); + int j; + + for (j = 0; j < intfc->num_altsetting; j++) { + struct usb_host_interface *alt = &intfc->altsetting[j]; + + kfree(alt->endpoint); + kfree(alt->string); + } + kfree(intfc); +} + +static int usb_parse_interface(struct device *ddev, int cfgno, + struct usb_host_config *config, unsigned char *buffer, int size, + u8 inums[], u8 nalts[]) +{ + unsigned char *buffer0 = buffer; + struct usb_interface_descriptor *d; + int inum, asnum; + struct usb_interface_cache *intfc; + struct usb_host_interface *alt; + int i, n; + int len, retval; + int num_ep, num_ep_orig; + + d = (struct usb_interface_descriptor *) buffer; + buffer += d->bLength; + size -= d->bLength; + + if (d->bLength < USB_DT_INTERFACE_SIZE) + goto skip_to_next_interface_descriptor; + + /* Which interface entry is this? */ + intfc = NULL; + inum = d->bInterfaceNumber; + for (i = 0; i < config->desc.bNumInterfaces; ++i) { + if (inums[i] == inum) { + intfc = config->intf_cache[i]; + break; + } + } + if (!intfc || intfc->num_altsetting >= nalts[i]) + goto skip_to_next_interface_descriptor; + + /* Check for duplicate altsetting entries */ + asnum = d->bAlternateSetting; + for ((i = 0, alt = &intfc->altsetting[0]); + i < intfc->num_altsetting; + (++i, ++alt)) { + if (alt->desc.bAlternateSetting == asnum) { + dev_notice(ddev, "Duplicate descriptor for config %d " + "interface %d altsetting %d, skipping\n", + cfgno, inum, asnum); + goto skip_to_next_interface_descriptor; + } + } + + ++intfc->num_altsetting; + memcpy(&alt->desc, d, USB_DT_INTERFACE_SIZE); + + /* Skip over any Class Specific or Vendor Specific descriptors; + * find the first endpoint or interface descriptor */ + alt->extra = buffer; + i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT, + USB_DT_INTERFACE, &n); + alt->extralen = i; + if (n > 0) + dev_dbg(ddev, "skipped %d descriptor%s after %s\n", + n, plural(n), "interface"); + buffer += i; + size -= i; + + /* Allocate space for the right(?) number of endpoints */ + num_ep = num_ep_orig = alt->desc.bNumEndpoints; + alt->desc.bNumEndpoints = 0; /* Use as a counter */ + if (num_ep > USB_MAXENDPOINTS) { + dev_notice(ddev, "too many endpoints for config %d interface %d " + "altsetting %d: %d, using maximum allowed: %d\n", + cfgno, inum, asnum, num_ep, USB_MAXENDPOINTS); + num_ep = USB_MAXENDPOINTS; + } + + if (num_ep > 0) { + /* Can't allocate 0 bytes */ + len = sizeof(struct usb_host_endpoint) * num_ep; + alt->endpoint = kzalloc(len, GFP_KERNEL); + if (!alt->endpoint) + return -ENOMEM; + } + + /* Parse all the endpoint descriptors */ + n = 0; + while (size > 0) { + if (((struct usb_descriptor_header *) buffer)->bDescriptorType + == USB_DT_INTERFACE) + break; + retval = usb_parse_endpoint(ddev, cfgno, config, inum, asnum, + alt, num_ep, buffer, size); + if (retval < 0) + return retval; + ++n; + + buffer += retval; + size -= retval; + } + + if (n != num_ep_orig) + dev_notice(ddev, "config %d interface %d altsetting %d has %d " + "endpoint descriptor%s, different from the interface " + "descriptor's value: %d\n", + cfgno, inum, asnum, n, plural(n), num_ep_orig); + return buffer - buffer0; + +skip_to_next_interface_descriptor: + i = find_next_descriptor(buffer, size, USB_DT_INTERFACE, + USB_DT_INTERFACE, NULL); + return buffer - buffer0 + i; +} + +static int usb_parse_configuration(struct usb_device *dev, int cfgidx, + struct usb_host_config *config, unsigned char *buffer, int size) +{ + struct device *ddev = &dev->dev; + unsigned char *buffer0 = buffer; + int cfgno; + int nintf, nintf_orig; + int i, j, n; + struct usb_interface_cache *intfc; + unsigned char *buffer2; + int size2; + struct usb_descriptor_header *header; + int retval; + u8 inums[USB_MAXINTERFACES], nalts[USB_MAXINTERFACES]; + unsigned iad_num = 0; + + memcpy(&config->desc, buffer, USB_DT_CONFIG_SIZE); + nintf = nintf_orig = config->desc.bNumInterfaces; + config->desc.bNumInterfaces = 0; // Adjusted later + + if (config->desc.bDescriptorType != USB_DT_CONFIG || + config->desc.bLength < USB_DT_CONFIG_SIZE || + config->desc.bLength > size) { + dev_notice(ddev, "invalid descriptor for config index %d: " + "type = 0x%X, length = %d\n", cfgidx, + config->desc.bDescriptorType, config->desc.bLength); + return -EINVAL; + } + cfgno = config->desc.bConfigurationValue; + + buffer += config->desc.bLength; + size -= config->desc.bLength; + + if (nintf > USB_MAXINTERFACES) { + dev_notice(ddev, "config %d has too many interfaces: %d, " + "using maximum allowed: %d\n", + cfgno, nintf, USB_MAXINTERFACES); + nintf = USB_MAXINTERFACES; + } + + /* Go through the descriptors, checking their length and counting the + * number of altsettings for each interface */ + n = 0; + for ((buffer2 = buffer, size2 = size); + size2 > 0; + (buffer2 += header->bLength, size2 -= header->bLength)) { + + if (size2 < sizeof(struct usb_descriptor_header)) { + dev_notice(ddev, "config %d descriptor has %d excess " + "byte%s, ignoring\n", + cfgno, size2, plural(size2)); + break; + } + + header = (struct usb_descriptor_header *) buffer2; + if ((header->bLength > size2) || (header->bLength < 2)) { + dev_notice(ddev, "config %d has an invalid descriptor " + "of length %d, skipping remainder of the config\n", + cfgno, header->bLength); + break; + } + + if (header->bDescriptorType == USB_DT_INTERFACE) { + struct usb_interface_descriptor *d; + int inum; + + d = (struct usb_interface_descriptor *) header; + if (d->bLength < USB_DT_INTERFACE_SIZE) { + dev_notice(ddev, "config %d has an invalid " + "interface descriptor of length %d, " + "skipping\n", cfgno, d->bLength); + continue; + } + + inum = d->bInterfaceNumber; + + if ((dev->quirks & USB_QUIRK_HONOR_BNUMINTERFACES) && + n >= nintf_orig) { + dev_notice(ddev, "config %d has more interface " + "descriptors, than it declares in " + "bNumInterfaces, ignoring interface " + "number: %d\n", cfgno, inum); + continue; + } + + if (inum >= nintf_orig) + dev_notice(ddev, "config %d has an invalid " + "interface number: %d but max is %d\n", + cfgno, inum, nintf_orig - 1); + + /* Have we already encountered this interface? + * Count its altsettings */ + for (i = 0; i < n; ++i) { + if (inums[i] == inum) + break; + } + if (i < n) { + if (nalts[i] < 255) + ++nalts[i]; + } else if (n < USB_MAXINTERFACES) { + inums[n] = inum; + nalts[n] = 1; + ++n; + } + + } else if (header->bDescriptorType == + USB_DT_INTERFACE_ASSOCIATION) { + struct usb_interface_assoc_descriptor *d; + + d = (struct usb_interface_assoc_descriptor *)header; + if (d->bLength < USB_DT_INTERFACE_ASSOCIATION_SIZE) { + dev_notice(ddev, + "config %d has an invalid interface association descriptor of length %d, skipping\n", + cfgno, d->bLength); + continue; + } + + if (iad_num == USB_MAXIADS) { + dev_notice(ddev, "found more Interface " + "Association Descriptors " + "than allocated for in " + "configuration %d\n", cfgno); + } else { + config->intf_assoc[iad_num] = d; + iad_num++; + } + + } else if (header->bDescriptorType == USB_DT_DEVICE || + header->bDescriptorType == USB_DT_CONFIG) + dev_notice(ddev, "config %d contains an unexpected " + "descriptor of type 0x%X, skipping\n", + cfgno, header->bDescriptorType); + + } /* for ((buffer2 = buffer, size2 = size); ...) */ + size = buffer2 - buffer; + config->desc.wTotalLength = cpu_to_le16(buffer2 - buffer0); + + if (n != nintf) + dev_notice(ddev, "config %d has %d interface%s, different from " + "the descriptor's value: %d\n", + cfgno, n, plural(n), nintf_orig); + else if (n == 0) + dev_notice(ddev, "config %d has no interfaces?\n", cfgno); + config->desc.bNumInterfaces = nintf = n; + + /* Check for missing interface numbers */ + for (i = 0; i < nintf; ++i) { + for (j = 0; j < nintf; ++j) { + if (inums[j] == i) + break; + } + if (j >= nintf) + dev_notice(ddev, "config %d has no interface number " + "%d\n", cfgno, i); + } + + /* Allocate the usb_interface_caches and altsetting arrays */ + for (i = 0; i < nintf; ++i) { + j = nalts[i]; + if (j > USB_MAXALTSETTING) { + dev_notice(ddev, "too many alternate settings for " + "config %d interface %d: %d, " + "using maximum allowed: %d\n", + cfgno, inums[i], j, USB_MAXALTSETTING); + nalts[i] = j = USB_MAXALTSETTING; + } + + intfc = kzalloc(struct_size(intfc, altsetting, j), GFP_KERNEL); + config->intf_cache[i] = intfc; + if (!intfc) + return -ENOMEM; + kref_init(&intfc->ref); + } + + /* FIXME: parse the BOS descriptor */ + + /* Skip over any Class Specific or Vendor Specific descriptors; + * find the first interface descriptor */ + config->extra = buffer; + i = find_next_descriptor(buffer, size, USB_DT_INTERFACE, + USB_DT_INTERFACE, &n); + config->extralen = i; + if (n > 0) + dev_dbg(ddev, "skipped %d descriptor%s after %s\n", + n, plural(n), "configuration"); + buffer += i; + size -= i; + + /* Parse all the interface/altsetting descriptors */ + while (size > 0) { + retval = usb_parse_interface(ddev, cfgno, config, + buffer, size, inums, nalts); + if (retval < 0) + return retval; + + buffer += retval; + size -= retval; + } + + /* Check for missing altsettings */ + for (i = 0; i < nintf; ++i) { + intfc = config->intf_cache[i]; + for (j = 0; j < intfc->num_altsetting; ++j) { + for (n = 0; n < intfc->num_altsetting; ++n) { + if (intfc->altsetting[n].desc. + bAlternateSetting == j) + break; + } + if (n >= intfc->num_altsetting) + dev_notice(ddev, "config %d interface %d has no " + "altsetting %d\n", cfgno, inums[i], j); + } + } + + return 0; +} + +/* hub-only!! ... and only exported for reset/reinit path. + * otherwise used internally on disconnect/destroy path + */ +void usb_destroy_configuration(struct usb_device *dev) +{ + int c, i; + + if (!dev->config) + return; + + if (dev->rawdescriptors) { + for (i = 0; i < dev->descriptor.bNumConfigurations; i++) + kfree(dev->rawdescriptors[i]); + + kfree(dev->rawdescriptors); + dev->rawdescriptors = NULL; + } + + for (c = 0; c < dev->descriptor.bNumConfigurations; c++) { + struct usb_host_config *cf = &dev->config[c]; + + kfree(cf->string); + for (i = 0; i < cf->desc.bNumInterfaces; i++) { + if (cf->intf_cache[i]) + kref_put(&cf->intf_cache[i]->ref, + usb_release_interface_cache); + } + } + kfree(dev->config); + dev->config = NULL; +} + + +/* + * Get the USB config descriptors, cache and parse'em + * + * hub-only!! ... and only in reset path, or usb_new_device() + * (used by real hubs and virtual root hubs) + */ +int usb_get_configuration(struct usb_device *dev) +{ + struct device *ddev = &dev->dev; + int ncfg = dev->descriptor.bNumConfigurations; + unsigned int cfgno, length; + unsigned char *bigbuffer; + struct usb_config_descriptor *desc; + int result; + + if (ncfg > USB_MAXCONFIG) { + dev_notice(ddev, "too many configurations: %d, " + "using maximum allowed: %d\n", ncfg, USB_MAXCONFIG); + dev->descriptor.bNumConfigurations = ncfg = USB_MAXCONFIG; + } + + if (ncfg < 1) { + dev_err(ddev, "no configurations\n"); + return -EINVAL; + } + + length = ncfg * sizeof(struct usb_host_config); + dev->config = kzalloc(length, GFP_KERNEL); + if (!dev->config) + return -ENOMEM; + + length = ncfg * sizeof(char *); + dev->rawdescriptors = kzalloc(length, GFP_KERNEL); + if (!dev->rawdescriptors) + return -ENOMEM; + + desc = kmalloc(USB_DT_CONFIG_SIZE, GFP_KERNEL); + if (!desc) + return -ENOMEM; + + for (cfgno = 0; cfgno < ncfg; cfgno++) { + /* We grab just the first descriptor so we know how long + * the whole configuration is */ + result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, + desc, USB_DT_CONFIG_SIZE); + if (result < 0) { + dev_err(ddev, "unable to read config index %d " + "descriptor/%s: %d\n", cfgno, "start", result); + if (result != -EPIPE) + goto err; + dev_notice(ddev, "chopping to %d config(s)\n", cfgno); + dev->descriptor.bNumConfigurations = cfgno; + break; + } else if (result < 4) { + dev_err(ddev, "config index %d descriptor too short " + "(expected %i, got %i)\n", cfgno, + USB_DT_CONFIG_SIZE, result); + result = -EINVAL; + goto err; + } + length = max((int) le16_to_cpu(desc->wTotalLength), + USB_DT_CONFIG_SIZE); + + /* Now that we know the length, get the whole thing */ + bigbuffer = kmalloc(length, GFP_KERNEL); + if (!bigbuffer) { + result = -ENOMEM; + goto err; + } + + if (dev->quirks & USB_QUIRK_DELAY_INIT) + msleep(200); + + result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, + bigbuffer, length); + if (result < 0) { + dev_err(ddev, "unable to read config index %d " + "descriptor/%s\n", cfgno, "all"); + kfree(bigbuffer); + goto err; + } + if (result < length) { + dev_notice(ddev, "config index %d descriptor too short " + "(expected %i, got %i)\n", cfgno, length, result); + length = result; + } + + dev->rawdescriptors[cfgno] = bigbuffer; + + result = usb_parse_configuration(dev, cfgno, + &dev->config[cfgno], bigbuffer, length); + if (result < 0) { + ++cfgno; + goto err; + } + } + +err: + kfree(desc); + dev->descriptor.bNumConfigurations = cfgno; + + return result; +} + +void usb_release_bos_descriptor(struct usb_device *dev) +{ + if (dev->bos) { + kfree(dev->bos->desc); + kfree(dev->bos); + dev->bos = NULL; + } +} + +static const __u8 bos_desc_len[256] = { + [USB_CAP_TYPE_WIRELESS_USB] = USB_DT_USB_WIRELESS_CAP_SIZE, + [USB_CAP_TYPE_EXT] = USB_DT_USB_EXT_CAP_SIZE, + [USB_SS_CAP_TYPE] = USB_DT_USB_SS_CAP_SIZE, + [USB_SSP_CAP_TYPE] = USB_DT_USB_SSP_CAP_SIZE(1), + [CONTAINER_ID_TYPE] = USB_DT_USB_SS_CONTN_ID_SIZE, + [USB_PTM_CAP_TYPE] = USB_DT_USB_PTM_ID_SIZE, +}; + +/* Get BOS descriptor set */ +int usb_get_bos_descriptor(struct usb_device *dev) +{ + struct device *ddev = &dev->dev; + struct usb_bos_descriptor *bos; + struct usb_dev_cap_header *cap; + struct usb_ssp_cap_descriptor *ssp_cap; + unsigned char *buffer, *buffer0; + int length, total_len, num, i, ssac; + __u8 cap_type; + int ret; + + bos = kzalloc(sizeof(*bos), GFP_KERNEL); + if (!bos) + return -ENOMEM; + + /* Get BOS descriptor */ + ret = usb_get_descriptor(dev, USB_DT_BOS, 0, bos, USB_DT_BOS_SIZE); + if (ret < USB_DT_BOS_SIZE || bos->bLength < USB_DT_BOS_SIZE) { + dev_notice(ddev, "unable to get BOS descriptor or descriptor too short\n"); + if (ret >= 0) + ret = -ENOMSG; + kfree(bos); + return ret; + } + + length = bos->bLength; + total_len = le16_to_cpu(bos->wTotalLength); + num = bos->bNumDeviceCaps; + kfree(bos); + if (total_len < length) + return -EINVAL; + + dev->bos = kzalloc(sizeof(*dev->bos), GFP_KERNEL); + if (!dev->bos) + return -ENOMEM; + + /* Now let's get the whole BOS descriptor set */ + buffer = kzalloc(total_len, GFP_KERNEL); + if (!buffer) { + ret = -ENOMEM; + goto err; + } + dev->bos->desc = (struct usb_bos_descriptor *)buffer; + + ret = usb_get_descriptor(dev, USB_DT_BOS, 0, buffer, total_len); + if (ret < total_len) { + dev_notice(ddev, "unable to get BOS descriptor set\n"); + if (ret >= 0) + ret = -ENOMSG; + goto err; + } + + buffer0 = buffer; + total_len -= length; + buffer += length; + + for (i = 0; i < num; i++) { + cap = (struct usb_dev_cap_header *)buffer; + + if (total_len < sizeof(*cap) || total_len < cap->bLength) { + dev->bos->desc->bNumDeviceCaps = i; + break; + } + cap_type = cap->bDevCapabilityType; + length = cap->bLength; + if (bos_desc_len[cap_type] && length < bos_desc_len[cap_type]) { + dev->bos->desc->bNumDeviceCaps = i; + break; + } + + if (cap->bDescriptorType != USB_DT_DEVICE_CAPABILITY) { + dev_notice(ddev, "descriptor type invalid, skip\n"); + goto skip_to_next_descriptor; + } + + switch (cap_type) { + case USB_CAP_TYPE_WIRELESS_USB: + /* Wireless USB cap descriptor is handled by wusb */ + break; + case USB_CAP_TYPE_EXT: + dev->bos->ext_cap = + (struct usb_ext_cap_descriptor *)buffer; + break; + case USB_SS_CAP_TYPE: + dev->bos->ss_cap = + (struct usb_ss_cap_descriptor *)buffer; + break; + case USB_SSP_CAP_TYPE: + ssp_cap = (struct usb_ssp_cap_descriptor *)buffer; + ssac = (le32_to_cpu(ssp_cap->bmAttributes) & + USB_SSP_SUBLINK_SPEED_ATTRIBS); + if (length >= USB_DT_USB_SSP_CAP_SIZE(ssac)) + dev->bos->ssp_cap = ssp_cap; + break; + case CONTAINER_ID_TYPE: + dev->bos->ss_id = + (struct usb_ss_container_id_descriptor *)buffer; + break; + case USB_PTM_CAP_TYPE: + dev->bos->ptm_cap = + (struct usb_ptm_cap_descriptor *)buffer; + break; + default: + break; + } + +skip_to_next_descriptor: + total_len -= length; + buffer += length; + } + dev->bos->desc->wTotalLength = cpu_to_le16(buffer - buffer0); + + return 0; + +err: + usb_release_bos_descriptor(dev); + return ret; +} diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c new file mode 100644 index 000000000..2c14a9636 --- /dev/null +++ b/drivers/usb/core/devices.c @@ -0,0 +1,546 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * devices.c + * (C) Copyright 1999 Randy Dunlap. + * (C) Copyright 1999,2000 Thomas Sailer <sailer@ife.ee.ethz.ch>. + * (proc file per device) + * (C) Copyright 1999 Deti Fliegl (new USB architecture) + * + ************************************************************* + * + * <mountpoint>/devices contains USB topology, device, config, class, + * interface, & endpoint data. + * + * I considered using /dev/bus/usb/device# for each device + * as it is attached or detached, but I didn't like this for some + * reason -- maybe it's just too deep of a directory structure. + * I also don't like looking in multiple places to gather and view + * the data. Having only one file for ./devices also prevents race + * conditions that could arise if a program was reading device info + * for devices that are being removed (unplugged). (That is, the + * program may find a directory for devnum_12 then try to open it, + * but it was just unplugged, so the directory is now deleted. + * But programs would just have to be prepared for situations like + * this in any plug-and-play environment.) + * + * 1999-12-16: Thomas Sailer <sailer@ife.ee.ethz.ch> + * Converted the whole proc stuff to real + * read methods. Now not the whole device list needs to fit + * into one page, only the device list for one bus. + * Added a poll method to /sys/kernel/debug/usb/devices, to wake + * up an eventual usbd + * 2000-01-04: Thomas Sailer <sailer@ife.ee.ethz.ch> + * Turned into its own filesystem + * 2000-07-05: Ashley Montanaro <ashley@compsoc.man.ac.uk> + * Converted file reading routine to dump to buffer once + * per device, not per bus + */ + +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/gfp.h> +#include <linux/usb.h> +#include <linux/usbdevice_fs.h> +#include <linux/usb/hcd.h> +#include <linux/mutex.h> +#include <linux/uaccess.h> + +#include "usb.h" + +/* Define ALLOW_SERIAL_NUMBER if you want to see the serial number of devices */ +#define ALLOW_SERIAL_NUMBER + +static const char format_topo[] = +/* T: Bus=dd Lev=dd Prnt=dd Port=dd Cnt=dd Dev#=ddd Spd=dddd MxCh=dd */ +"\nT: Bus=%2.2d Lev=%2.2d Prnt=%2.2d Port=%2.2d Cnt=%2.2d Dev#=%3d Spd=%-4s MxCh=%2d\n"; + +static const char format_string_manufacturer[] = +/* S: Manufacturer=xxxx */ + "S: Manufacturer=%.100s\n"; + +static const char format_string_product[] = +/* S: Product=xxxx */ + "S: Product=%.100s\n"; + +#ifdef ALLOW_SERIAL_NUMBER +static const char format_string_serialnumber[] = +/* S: SerialNumber=xxxx */ + "S: SerialNumber=%.100s\n"; +#endif + +static const char format_bandwidth[] = +/* B: Alloc=ddd/ddd us (xx%), #Int=ddd, #Iso=ddd */ + "B: Alloc=%3d/%3d us (%2d%%), #Int=%3d, #Iso=%3d\n"; + +static const char format_device1[] = +/* D: Ver=xx.xx Cls=xx(sssss) Sub=xx Prot=xx MxPS=dd #Cfgs=dd */ + "D: Ver=%2x.%02x Cls=%02x(%-5s) Sub=%02x Prot=%02x MxPS=%2d #Cfgs=%3d\n"; + +static const char format_device2[] = +/* P: Vendor=xxxx ProdID=xxxx Rev=xx.xx */ + "P: Vendor=%04x ProdID=%04x Rev=%2x.%02x\n"; + +static const char format_config[] = +/* C: #Ifs=dd Cfg#=dd Atr=xx MPwr=dddmA */ + "C:%c #Ifs=%2d Cfg#=%2d Atr=%02x MxPwr=%3dmA\n"; + +static const char format_iad[] = +/* A: FirstIf#=dd IfCount=dd Cls=xx(sssss) Sub=xx Prot=xx */ + "A: FirstIf#=%2d IfCount=%2d Cls=%02x(%-5s) Sub=%02x Prot=%02x\n"; + +static const char format_iface[] = +/* I: If#=dd Alt=dd #EPs=dd Cls=xx(sssss) Sub=xx Prot=xx Driver=xxxx*/ + "I:%c If#=%2d Alt=%2d #EPs=%2d Cls=%02x(%-5s) Sub=%02x Prot=%02x Driver=%s\n"; + +static const char format_endpt[] = +/* E: Ad=xx(s) Atr=xx(ssss) MxPS=dddd Ivl=D?s */ + "E: Ad=%02x(%c) Atr=%02x(%-4s) MxPS=%4d Ivl=%d%cs\n"; + +struct class_info { + int class; + char *class_name; +}; + +static const struct class_info clas_info[] = { + /* max. 5 chars. per name string */ + {USB_CLASS_PER_INTERFACE, ">ifc"}, + {USB_CLASS_AUDIO, "audio"}, + {USB_CLASS_COMM, "comm."}, + {USB_CLASS_HID, "HID"}, + {USB_CLASS_PHYSICAL, "PID"}, + {USB_CLASS_STILL_IMAGE, "still"}, + {USB_CLASS_PRINTER, "print"}, + {USB_CLASS_MASS_STORAGE, "stor."}, + {USB_CLASS_HUB, "hub"}, + {USB_CLASS_CDC_DATA, "data"}, + {USB_CLASS_CSCID, "scard"}, + {USB_CLASS_CONTENT_SEC, "c-sec"}, + {USB_CLASS_VIDEO, "video"}, + {USB_CLASS_PERSONAL_HEALTHCARE, "perhc"}, + {USB_CLASS_AUDIO_VIDEO, "av"}, + {USB_CLASS_BILLBOARD, "blbrd"}, + {USB_CLASS_USB_TYPE_C_BRIDGE, "bridg"}, + {USB_CLASS_WIRELESS_CONTROLLER, "wlcon"}, + {USB_CLASS_MISC, "misc"}, + {USB_CLASS_APP_SPEC, "app."}, + {USB_CLASS_VENDOR_SPEC, "vend."}, + {-1, "unk."} /* leave as last */ +}; + +/*****************************************************************/ + +static const char *class_decode(const int class) +{ + int ix; + + for (ix = 0; clas_info[ix].class != -1; ix++) + if (clas_info[ix].class == class) + break; + return clas_info[ix].class_name; +} + +static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end, + const struct usb_endpoint_descriptor *desc) +{ + char dir, unit, *type; + unsigned interval, bandwidth = 1; + + if (start > end) + return start; + + dir = usb_endpoint_dir_in(desc) ? 'I' : 'O'; + + if (speed == USB_SPEED_HIGH) + bandwidth = usb_endpoint_maxp_mult(desc); + + /* this isn't checking for illegal values */ + switch (usb_endpoint_type(desc)) { + case USB_ENDPOINT_XFER_CONTROL: + type = "Ctrl"; + dir = 'B'; /* ctrl is bidirectional */ + break; + case USB_ENDPOINT_XFER_ISOC: + type = "Isoc"; + break; + case USB_ENDPOINT_XFER_BULK: + type = "Bulk"; + break; + case USB_ENDPOINT_XFER_INT: + type = "Int."; + break; + default: /* "can't happen" */ + return start; + } + + interval = usb_decode_interval(desc, speed); + if (interval % 1000) { + unit = 'u'; + } else { + unit = 'm'; + interval /= 1000; + } + + start += sprintf(start, format_endpt, desc->bEndpointAddress, dir, + desc->bmAttributes, type, + usb_endpoint_maxp(desc) * + bandwidth, + interval, unit); + return start; +} + +static char *usb_dump_interface_descriptor(char *start, char *end, + const struct usb_interface_cache *intfc, + const struct usb_interface *iface, + int setno) +{ + const struct usb_interface_descriptor *desc; + const char *driver_name = ""; + int active = 0; + + if (start > end) + return start; + desc = &intfc->altsetting[setno].desc; + if (iface) { + driver_name = (iface->dev.driver + ? iface->dev.driver->name + : "(none)"); + active = (desc == &iface->cur_altsetting->desc); + } + start += sprintf(start, format_iface, + active ? '*' : ' ', /* mark active altsetting */ + desc->bInterfaceNumber, + desc->bAlternateSetting, + desc->bNumEndpoints, + desc->bInterfaceClass, + class_decode(desc->bInterfaceClass), + desc->bInterfaceSubClass, + desc->bInterfaceProtocol, + driver_name); + return start; +} + +static char *usb_dump_interface(int speed, char *start, char *end, + const struct usb_interface_cache *intfc, + const struct usb_interface *iface, int setno) +{ + const struct usb_host_interface *desc = &intfc->altsetting[setno]; + int i; + + start = usb_dump_interface_descriptor(start, end, intfc, iface, setno); + for (i = 0; i < desc->desc.bNumEndpoints; i++) { + start = usb_dump_endpoint_descriptor(speed, + start, end, &desc->endpoint[i].desc); + } + return start; +} + +static char *usb_dump_iad_descriptor(char *start, char *end, + const struct usb_interface_assoc_descriptor *iad) +{ + if (start > end) + return start; + start += sprintf(start, format_iad, + iad->bFirstInterface, + iad->bInterfaceCount, + iad->bFunctionClass, + class_decode(iad->bFunctionClass), + iad->bFunctionSubClass, + iad->bFunctionProtocol); + return start; +} + +/* TBD: + * 0. TBDs + * 1. marking active interface altsettings (code lists all, but should mark + * which ones are active, if any) + */ +static char *usb_dump_config_descriptor(char *start, char *end, + const struct usb_config_descriptor *desc, + int active, int speed) +{ + int mul; + + if (start > end) + return start; + if (speed >= USB_SPEED_SUPER) + mul = 8; + else + mul = 2; + start += sprintf(start, format_config, + /* mark active/actual/current cfg. */ + active ? '*' : ' ', + desc->bNumInterfaces, + desc->bConfigurationValue, + desc->bmAttributes, + desc->bMaxPower * mul); + return start; +} + +static char *usb_dump_config(int speed, char *start, char *end, + const struct usb_host_config *config, int active) +{ + int i, j; + struct usb_interface_cache *intfc; + struct usb_interface *interface; + + if (start > end) + return start; + if (!config) + /* getting these some in 2.3.7; none in 2.3.6 */ + return start + sprintf(start, "(null Cfg. desc.)\n"); + start = usb_dump_config_descriptor(start, end, &config->desc, active, + speed); + for (i = 0; i < USB_MAXIADS; i++) { + if (config->intf_assoc[i] == NULL) + break; + start = usb_dump_iad_descriptor(start, end, + config->intf_assoc[i]); + } + for (i = 0; i < config->desc.bNumInterfaces; i++) { + intfc = config->intf_cache[i]; + interface = config->interface[i]; + for (j = 0; j < intfc->num_altsetting; j++) { + start = usb_dump_interface(speed, + start, end, intfc, interface, j); + } + } + return start; +} + +/* + * Dump the different USB descriptors. + */ +static char *usb_dump_device_descriptor(char *start, char *end, + const struct usb_device_descriptor *desc) +{ + u16 bcdUSB = le16_to_cpu(desc->bcdUSB); + u16 bcdDevice = le16_to_cpu(desc->bcdDevice); + + if (start > end) + return start; + start += sprintf(start, format_device1, + bcdUSB >> 8, bcdUSB & 0xff, + desc->bDeviceClass, + class_decode(desc->bDeviceClass), + desc->bDeviceSubClass, + desc->bDeviceProtocol, + desc->bMaxPacketSize0, + desc->bNumConfigurations); + if (start > end) + return start; + start += sprintf(start, format_device2, + le16_to_cpu(desc->idVendor), + le16_to_cpu(desc->idProduct), + bcdDevice >> 8, bcdDevice & 0xff); + return start; +} + +/* + * Dump the different strings that this device holds. + */ +static char *usb_dump_device_strings(char *start, char *end, + struct usb_device *dev) +{ + if (start > end) + return start; + if (dev->manufacturer) + start += sprintf(start, format_string_manufacturer, + dev->manufacturer); + if (start > end) + goto out; + if (dev->product) + start += sprintf(start, format_string_product, dev->product); + if (start > end) + goto out; +#ifdef ALLOW_SERIAL_NUMBER + if (dev->serial) + start += sprintf(start, format_string_serialnumber, + dev->serial); +#endif + out: + return start; +} + +static char *usb_dump_desc(char *start, char *end, struct usb_device *dev) +{ + int i; + + start = usb_dump_device_descriptor(start, end, &dev->descriptor); + + start = usb_dump_device_strings(start, end, dev); + + for (i = 0; i < dev->descriptor.bNumConfigurations; i++) { + start = usb_dump_config(dev->speed, + start, end, dev->config + i, + /* active ? */ + (dev->config + i) == dev->actconfig); + } + return start; +} + +/*****************************************************************/ + +/* This is a recursive function. Parameters: + * buffer - the user-space buffer to write data into + * nbytes - the maximum number of bytes to write + * skip_bytes - the number of bytes to skip before writing anything + * file_offset - the offset into the devices file on completion + * The caller must own the device lock. + */ +static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes, + loff_t *skip_bytes, loff_t *file_offset, + struct usb_device *usbdev, struct usb_bus *bus, + int level, int index, int count) +{ + int chix; + int ret, cnt = 0; + int parent_devnum = 0; + char *pages_start, *data_end, *speed; + unsigned int length; + ssize_t total_written = 0; + struct usb_device *childdev = NULL; + + /* don't bother with anything else if we're not writing any data */ + if (*nbytes <= 0) + return 0; + + if (level > MAX_TOPO_LEVEL) + return 0; + /* allocate 2^1 pages = 8K (on i386); + * should be more than enough for one device */ + pages_start = (char *)__get_free_pages(GFP_NOIO, 1); + if (!pages_start) + return -ENOMEM; + + if (usbdev->parent && usbdev->parent->devnum != -1) + parent_devnum = usbdev->parent->devnum; + /* + * So the root hub's parent is 0 and any device that is + * plugged into the root hub has a parent of 0. + */ + switch (usbdev->speed) { + case USB_SPEED_LOW: + speed = "1.5"; break; + case USB_SPEED_UNKNOWN: /* usb 1.1 root hub code */ + case USB_SPEED_FULL: + speed = "12"; break; + case USB_SPEED_WIRELESS: /* Wireless has no real fixed speed */ + case USB_SPEED_HIGH: + speed = "480"; break; + case USB_SPEED_SUPER: + speed = "5000"; break; + case USB_SPEED_SUPER_PLUS: + speed = "10000"; break; + default: + speed = "??"; + } + data_end = pages_start + sprintf(pages_start, format_topo, + bus->busnum, level, parent_devnum, + index, count, usbdev->devnum, + speed, usbdev->maxchild); + /* + * level = topology-tier level; + * parent_devnum = parent device number; + * index = parent's connector number; + * count = device count at this level + */ + /* If this is the root hub, display the bandwidth information */ + if (level == 0) { + int max; + + /* super/high speed reserves 80%, full/low reserves 90% */ + if (usbdev->speed == USB_SPEED_HIGH || + usbdev->speed >= USB_SPEED_SUPER) + max = 800; + else + max = FRAME_TIME_MAX_USECS_ALLOC; + + /* report "average" periodic allocation over a microsecond. + * the schedules are actually bursty, HCDs need to deal with + * that and just compute/report this average. + */ + data_end += sprintf(data_end, format_bandwidth, + bus->bandwidth_allocated, max, + (100 * bus->bandwidth_allocated + max / 2) + / max, + bus->bandwidth_int_reqs, + bus->bandwidth_isoc_reqs); + + } + data_end = usb_dump_desc(data_end, pages_start + (2 * PAGE_SIZE) - 256, + usbdev); + + if (data_end > (pages_start + (2 * PAGE_SIZE) - 256)) + data_end += sprintf(data_end, "(truncated)\n"); + + length = data_end - pages_start; + /* if we can start copying some data to the user */ + if (length > *skip_bytes) { + length -= *skip_bytes; + if (length > *nbytes) + length = *nbytes; + if (copy_to_user(*buffer, pages_start + *skip_bytes, length)) { + free_pages((unsigned long)pages_start, 1); + return -EFAULT; + } + *nbytes -= length; + *file_offset += length; + total_written += length; + *buffer += length; + *skip_bytes = 0; + } else + *skip_bytes -= length; + + free_pages((unsigned long)pages_start, 1); + + /* Now look at all of this device's children. */ + usb_hub_for_each_child(usbdev, chix, childdev) { + usb_lock_device(childdev); + ret = usb_device_dump(buffer, nbytes, skip_bytes, + file_offset, childdev, bus, + level + 1, chix - 1, ++cnt); + usb_unlock_device(childdev); + if (ret == -EFAULT) + return total_written; + total_written += ret; + } + return total_written; +} + +static ssize_t usb_device_read(struct file *file, char __user *buf, + size_t nbytes, loff_t *ppos) +{ + struct usb_bus *bus; + ssize_t ret, total_written = 0; + loff_t skip_bytes = *ppos; + int id; + + if (*ppos < 0) + return -EINVAL; + if (nbytes <= 0) + return 0; + + mutex_lock(&usb_bus_idr_lock); + /* print devices for all busses */ + idr_for_each_entry(&usb_bus_idr, bus, id) { + /* recurse through all children of the root hub */ + if (!bus_to_hcd(bus)->rh_registered) + continue; + usb_lock_device(bus->root_hub); + ret = usb_device_dump(&buf, &nbytes, &skip_bytes, ppos, + bus->root_hub, bus, 0, 0, 0); + usb_unlock_device(bus->root_hub); + if (ret < 0) { + mutex_unlock(&usb_bus_idr_lock); + return ret; + } + total_written += ret; + } + mutex_unlock(&usb_bus_idr_lock); + return total_written; +} + +const struct file_operations usbfs_devices_fops = { + .llseek = no_seek_end_llseek, + .read = usb_device_read, +}; diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c new file mode 100644 index 000000000..4184cd65a --- /dev/null +++ b/drivers/usb/core/devio.c @@ -0,0 +1,2921 @@ +// SPDX-License-Identifier: GPL-2.0+ +/*****************************************************************************/ + +/* + * devio.c -- User space communication with USB devices. + * + * Copyright (C) 1999-2000 Thomas Sailer (sailer@ife.ee.ethz.ch) + * + * This file implements the usbfs/x/y files, where + * x is the bus number and y the device number. + * + * It allows user space programs/"drivers" to communicate directly + * with USB devices without intervening kernel driver. + * + * Revision history + * 22.12.1999 0.1 Initial release (split from proc_usb.c) + * 04.01.2000 0.2 Turned into its own filesystem + * 30.09.2005 0.3 Fix user-triggerable oops in async URB delivery + * (CAN-2005-3055) + */ + +/*****************************************************************************/ + +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/sched/signal.h> +#include <linux/slab.h> +#include <linux/signal.h> +#include <linux/poll.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/usb.h> +#include <linux/usbdevice_fs.h> +#include <linux/usb/hcd.h> /* for usbcore internals */ +#include <linux/usb/quirks.h> +#include <linux/cdev.h> +#include <linux/notifier.h> +#include <linux/security.h> +#include <linux/user_namespace.h> +#include <linux/scatterlist.h> +#include <linux/uaccess.h> +#include <linux/dma-mapping.h> +#include <asm/byteorder.h> +#include <linux/moduleparam.h> + +#include "usb.h" + +#ifdef CONFIG_PM +#define MAYBE_CAP_SUSPEND USBDEVFS_CAP_SUSPEND +#else +#define MAYBE_CAP_SUSPEND 0 +#endif + +#define USB_MAXBUS 64 +#define USB_DEVICE_MAX (USB_MAXBUS * 128) +#define USB_SG_SIZE 16384 /* split-size for large txs */ + +/* Mutual exclusion for ps->list in resume vs. release and remove */ +static DEFINE_MUTEX(usbfs_mutex); + +struct usb_dev_state { + struct list_head list; /* state list */ + struct usb_device *dev; + struct file *file; + spinlock_t lock; /* protects the async urb lists */ + struct list_head async_pending; + struct list_head async_completed; + struct list_head memory_list; + wait_queue_head_t wait; /* wake up if a request completed */ + wait_queue_head_t wait_for_resume; /* wake up upon runtime resume */ + unsigned int discsignr; + struct pid *disc_pid; + const struct cred *cred; + sigval_t disccontext; + unsigned long ifclaimed; + u32 disabled_bulk_eps; + unsigned long interface_allowed_mask; + int not_yet_resumed; + bool suspend_allowed; + bool privileges_dropped; +}; + +struct usb_memory { + struct list_head memlist; + int vma_use_count; + int urb_use_count; + u32 size; + void *mem; + dma_addr_t dma_handle; + unsigned long vm_start; + struct usb_dev_state *ps; +}; + +struct async { + struct list_head asynclist; + struct usb_dev_state *ps; + struct pid *pid; + const struct cred *cred; + unsigned int signr; + unsigned int ifnum; + void __user *userbuffer; + void __user *userurb; + sigval_t userurb_sigval; + struct urb *urb; + struct usb_memory *usbm; + unsigned int mem_usage; + int status; + u8 bulk_addr; + u8 bulk_status; +}; + +static bool usbfs_snoop; +module_param(usbfs_snoop, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(usbfs_snoop, "true to log all usbfs traffic"); + +static unsigned usbfs_snoop_max = 65536; +module_param(usbfs_snoop_max, uint, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(usbfs_snoop_max, + "maximum number of bytes to print while snooping"); + +#define snoop(dev, format, arg...) \ + do { \ + if (usbfs_snoop) \ + dev_info(dev, format, ## arg); \ + } while (0) + +enum snoop_when { + SUBMIT, COMPLETE +}; + +#define USB_DEVICE_DEV MKDEV(USB_DEVICE_MAJOR, 0) + +/* Limit on the total amount of memory we can allocate for transfers */ +static u32 usbfs_memory_mb = 16; +module_param(usbfs_memory_mb, uint, 0644); +MODULE_PARM_DESC(usbfs_memory_mb, + "maximum MB allowed for usbfs buffers (0 = no limit)"); + +/* Hard limit, necessary to avoid arithmetic overflow */ +#define USBFS_XFER_MAX (UINT_MAX / 2 - 1000000) + +static DEFINE_SPINLOCK(usbfs_memory_usage_lock); +static u64 usbfs_memory_usage; /* Total memory currently allocated */ + +/* Check whether it's okay to allocate more memory for a transfer */ +static int usbfs_increase_memory_usage(u64 amount) +{ + u64 lim, total_mem; + unsigned long flags; + int ret; + + lim = READ_ONCE(usbfs_memory_mb); + lim <<= 20; + + ret = 0; + spin_lock_irqsave(&usbfs_memory_usage_lock, flags); + total_mem = usbfs_memory_usage + amount; + if (lim > 0 && total_mem > lim) + ret = -ENOMEM; + else + usbfs_memory_usage = total_mem; + spin_unlock_irqrestore(&usbfs_memory_usage_lock, flags); + + return ret; +} + +/* Memory for a transfer is being deallocated */ +static void usbfs_decrease_memory_usage(u64 amount) +{ + unsigned long flags; + + spin_lock_irqsave(&usbfs_memory_usage_lock, flags); + if (amount > usbfs_memory_usage) + usbfs_memory_usage = 0; + else + usbfs_memory_usage -= amount; + spin_unlock_irqrestore(&usbfs_memory_usage_lock, flags); +} + +static int connected(struct usb_dev_state *ps) +{ + return (!list_empty(&ps->list) && + ps->dev->state != USB_STATE_NOTATTACHED); +} + +static void dec_usb_memory_use_count(struct usb_memory *usbm, int *count) +{ + struct usb_dev_state *ps = usbm->ps; + struct usb_hcd *hcd = bus_to_hcd(ps->dev->bus); + unsigned long flags; + + spin_lock_irqsave(&ps->lock, flags); + --*count; + if (usbm->urb_use_count == 0 && usbm->vma_use_count == 0) { + list_del(&usbm->memlist); + spin_unlock_irqrestore(&ps->lock, flags); + + hcd_buffer_free_pages(hcd, usbm->size, + usbm->mem, usbm->dma_handle); + usbfs_decrease_memory_usage( + usbm->size + sizeof(struct usb_memory)); + kfree(usbm); + } else { + spin_unlock_irqrestore(&ps->lock, flags); + } +} + +static void usbdev_vm_open(struct vm_area_struct *vma) +{ + struct usb_memory *usbm = vma->vm_private_data; + unsigned long flags; + + spin_lock_irqsave(&usbm->ps->lock, flags); + ++usbm->vma_use_count; + spin_unlock_irqrestore(&usbm->ps->lock, flags); +} + +static void usbdev_vm_close(struct vm_area_struct *vma) +{ + struct usb_memory *usbm = vma->vm_private_data; + + dec_usb_memory_use_count(usbm, &usbm->vma_use_count); +} + +static const struct vm_operations_struct usbdev_vm_ops = { + .open = usbdev_vm_open, + .close = usbdev_vm_close +}; + +static int usbdev_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct usb_memory *usbm = NULL; + struct usb_dev_state *ps = file->private_data; + struct usb_hcd *hcd = bus_to_hcd(ps->dev->bus); + size_t size = vma->vm_end - vma->vm_start; + void *mem; + unsigned long flags; + dma_addr_t dma_handle = DMA_MAPPING_ERROR; + int ret; + + ret = usbfs_increase_memory_usage(size + sizeof(struct usb_memory)); + if (ret) + goto error; + + usbm = kzalloc(sizeof(struct usb_memory), GFP_KERNEL); + if (!usbm) { + ret = -ENOMEM; + goto error_decrease_mem; + } + + mem = hcd_buffer_alloc_pages(hcd, + size, GFP_USER | __GFP_NOWARN, &dma_handle); + if (!mem) { + ret = -ENOMEM; + goto error_free_usbm; + } + + memset(mem, 0, size); + + usbm->mem = mem; + usbm->dma_handle = dma_handle; + usbm->size = size; + usbm->ps = ps; + usbm->vm_start = vma->vm_start; + usbm->vma_use_count = 1; + INIT_LIST_HEAD(&usbm->memlist); + + /* + * In DMA-unavailable cases, hcd_buffer_alloc_pages allocates + * normal pages and assigns DMA_MAPPING_ERROR to dma_handle. Check + * whether we are in such cases, and then use remap_pfn_range (or + * dma_mmap_coherent) to map normal (or DMA) pages into the user + * space, respectively. + */ + if (dma_handle == DMA_MAPPING_ERROR) { + if (remap_pfn_range(vma, vma->vm_start, + virt_to_phys(usbm->mem) >> PAGE_SHIFT, + size, vma->vm_page_prot) < 0) { + dec_usb_memory_use_count(usbm, &usbm->vma_use_count); + return -EAGAIN; + } + } else { + if (dma_mmap_coherent(hcd->self.sysdev, vma, mem, dma_handle, + size)) { + dec_usb_memory_use_count(usbm, &usbm->vma_use_count); + return -EAGAIN; + } + } + + vma->vm_flags |= VM_IO; + vma->vm_flags |= (VM_DONTEXPAND | VM_DONTDUMP); + vma->vm_ops = &usbdev_vm_ops; + vma->vm_private_data = usbm; + + spin_lock_irqsave(&ps->lock, flags); + list_add_tail(&usbm->memlist, &ps->memory_list); + spin_unlock_irqrestore(&ps->lock, flags); + + return 0; + +error_free_usbm: + kfree(usbm); +error_decrease_mem: + usbfs_decrease_memory_usage(size + sizeof(struct usb_memory)); +error: + return ret; +} + +static ssize_t usbdev_read(struct file *file, char __user *buf, size_t nbytes, + loff_t *ppos) +{ + struct usb_dev_state *ps = file->private_data; + struct usb_device *dev = ps->dev; + ssize_t ret = 0; + unsigned len; + loff_t pos; + int i; + + pos = *ppos; + usb_lock_device(dev); + if (!connected(ps)) { + ret = -ENODEV; + goto err; + } else if (pos < 0) { + ret = -EINVAL; + goto err; + } + + if (pos < sizeof(struct usb_device_descriptor)) { + /* 18 bytes - fits on the stack */ + struct usb_device_descriptor temp_desc; + + memcpy(&temp_desc, &dev->descriptor, sizeof(dev->descriptor)); + le16_to_cpus(&temp_desc.bcdUSB); + le16_to_cpus(&temp_desc.idVendor); + le16_to_cpus(&temp_desc.idProduct); + le16_to_cpus(&temp_desc.bcdDevice); + + len = sizeof(struct usb_device_descriptor) - pos; + if (len > nbytes) + len = nbytes; + if (copy_to_user(buf, ((char *)&temp_desc) + pos, len)) { + ret = -EFAULT; + goto err; + } + + *ppos += len; + buf += len; + nbytes -= len; + ret += len; + } + + pos = sizeof(struct usb_device_descriptor); + for (i = 0; nbytes && i < dev->descriptor.bNumConfigurations; i++) { + struct usb_config_descriptor *config = + (struct usb_config_descriptor *)dev->rawdescriptors[i]; + unsigned int length = le16_to_cpu(config->wTotalLength); + + if (*ppos < pos + length) { + + /* The descriptor may claim to be longer than it + * really is. Here is the actual allocated length. */ + unsigned alloclen = + le16_to_cpu(dev->config[i].desc.wTotalLength); + + len = length - (*ppos - pos); + if (len > nbytes) + len = nbytes; + + /* Simply don't write (skip over) unallocated parts */ + if (alloclen > (*ppos - pos)) { + alloclen -= (*ppos - pos); + if (copy_to_user(buf, + dev->rawdescriptors[i] + (*ppos - pos), + min(len, alloclen))) { + ret = -EFAULT; + goto err; + } + } + + *ppos += len; + buf += len; + nbytes -= len; + ret += len; + } + + pos += length; + } + +err: + usb_unlock_device(dev); + return ret; +} + +/* + * async list handling + */ + +static struct async *alloc_async(unsigned int numisoframes) +{ + struct async *as; + + as = kzalloc(sizeof(struct async), GFP_KERNEL); + if (!as) + return NULL; + as->urb = usb_alloc_urb(numisoframes, GFP_KERNEL); + if (!as->urb) { + kfree(as); + return NULL; + } + return as; +} + +static void free_async(struct async *as) +{ + int i; + + put_pid(as->pid); + if (as->cred) + put_cred(as->cred); + for (i = 0; i < as->urb->num_sgs; i++) { + if (sg_page(&as->urb->sg[i])) + kfree(sg_virt(&as->urb->sg[i])); + } + + kfree(as->urb->sg); + if (as->usbm == NULL) + kfree(as->urb->transfer_buffer); + else + dec_usb_memory_use_count(as->usbm, &as->usbm->urb_use_count); + + kfree(as->urb->setup_packet); + usb_free_urb(as->urb); + usbfs_decrease_memory_usage(as->mem_usage); + kfree(as); +} + +static void async_newpending(struct async *as) +{ + struct usb_dev_state *ps = as->ps; + unsigned long flags; + + spin_lock_irqsave(&ps->lock, flags); + list_add_tail(&as->asynclist, &ps->async_pending); + spin_unlock_irqrestore(&ps->lock, flags); +} + +static void async_removepending(struct async *as) +{ + struct usb_dev_state *ps = as->ps; + unsigned long flags; + + spin_lock_irqsave(&ps->lock, flags); + list_del_init(&as->asynclist); + spin_unlock_irqrestore(&ps->lock, flags); +} + +static struct async *async_getcompleted(struct usb_dev_state *ps) +{ + unsigned long flags; + struct async *as = NULL; + + spin_lock_irqsave(&ps->lock, flags); + if (!list_empty(&ps->async_completed)) { + as = list_entry(ps->async_completed.next, struct async, + asynclist); + list_del_init(&as->asynclist); + } + spin_unlock_irqrestore(&ps->lock, flags); + return as; +} + +static struct async *async_getpending(struct usb_dev_state *ps, + void __user *userurb) +{ + struct async *as; + + list_for_each_entry(as, &ps->async_pending, asynclist) + if (as->userurb == userurb) { + list_del_init(&as->asynclist); + return as; + } + + return NULL; +} + +static void snoop_urb(struct usb_device *udev, + void __user *userurb, int pipe, unsigned length, + int timeout_or_status, enum snoop_when when, + unsigned char *data, unsigned data_len) +{ + static const char *types[] = {"isoc", "int", "ctrl", "bulk"}; + static const char *dirs[] = {"out", "in"}; + int ep; + const char *t, *d; + + if (!usbfs_snoop) + return; + + ep = usb_pipeendpoint(pipe); + t = types[usb_pipetype(pipe)]; + d = dirs[!!usb_pipein(pipe)]; + + if (userurb) { /* Async */ + if (when == SUBMIT) + dev_info(&udev->dev, "userurb %px, ep%d %s-%s, " + "length %u\n", + userurb, ep, t, d, length); + else + dev_info(&udev->dev, "userurb %px, ep%d %s-%s, " + "actual_length %u status %d\n", + userurb, ep, t, d, length, + timeout_or_status); + } else { + if (when == SUBMIT) + dev_info(&udev->dev, "ep%d %s-%s, length %u, " + "timeout %d\n", + ep, t, d, length, timeout_or_status); + else + dev_info(&udev->dev, "ep%d %s-%s, actual_length %u, " + "status %d\n", + ep, t, d, length, timeout_or_status); + } + + data_len = min(data_len, usbfs_snoop_max); + if (data && data_len > 0) { + print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_NONE, 32, 1, + data, data_len, 1); + } +} + +static void snoop_urb_data(struct urb *urb, unsigned len) +{ + int i, size; + + len = min(len, usbfs_snoop_max); + if (!usbfs_snoop || len == 0) + return; + + if (urb->num_sgs == 0) { + print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_NONE, 32, 1, + urb->transfer_buffer, len, 1); + return; + } + + for (i = 0; i < urb->num_sgs && len; i++) { + size = (len > USB_SG_SIZE) ? USB_SG_SIZE : len; + print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_NONE, 32, 1, + sg_virt(&urb->sg[i]), size, 1); + len -= size; + } +} + +static int copy_urb_data_to_user(u8 __user *userbuffer, struct urb *urb) +{ + unsigned i, len, size; + + if (urb->number_of_packets > 0) /* Isochronous */ + len = urb->transfer_buffer_length; + else /* Non-Isoc */ + len = urb->actual_length; + + if (urb->num_sgs == 0) { + if (copy_to_user(userbuffer, urb->transfer_buffer, len)) + return -EFAULT; + return 0; + } + + for (i = 0; i < urb->num_sgs && len; i++) { + size = (len > USB_SG_SIZE) ? USB_SG_SIZE : len; + if (copy_to_user(userbuffer, sg_virt(&urb->sg[i]), size)) + return -EFAULT; + userbuffer += size; + len -= size; + } + + return 0; +} + +#define AS_CONTINUATION 1 +#define AS_UNLINK 2 + +static void cancel_bulk_urbs(struct usb_dev_state *ps, unsigned bulk_addr) +__releases(ps->lock) +__acquires(ps->lock) +{ + struct urb *urb; + struct async *as; + + /* Mark all the pending URBs that match bulk_addr, up to but not + * including the first one without AS_CONTINUATION. If such an + * URB is encountered then a new transfer has already started so + * the endpoint doesn't need to be disabled; otherwise it does. + */ + list_for_each_entry(as, &ps->async_pending, asynclist) { + if (as->bulk_addr == bulk_addr) { + if (as->bulk_status != AS_CONTINUATION) + goto rescan; + as->bulk_status = AS_UNLINK; + as->bulk_addr = 0; + } + } + ps->disabled_bulk_eps |= (1 << bulk_addr); + + /* Now carefully unlink all the marked pending URBs */ + rescan: + list_for_each_entry_reverse(as, &ps->async_pending, asynclist) { + if (as->bulk_status == AS_UNLINK) { + as->bulk_status = 0; /* Only once */ + urb = as->urb; + usb_get_urb(urb); + spin_unlock(&ps->lock); /* Allow completions */ + usb_unlink_urb(urb); + usb_put_urb(urb); + spin_lock(&ps->lock); + goto rescan; + } + } +} + +static void async_completed(struct urb *urb) +{ + struct async *as = urb->context; + struct usb_dev_state *ps = as->ps; + struct pid *pid = NULL; + const struct cred *cred = NULL; + unsigned long flags; + sigval_t addr; + int signr, errno; + + spin_lock_irqsave(&ps->lock, flags); + list_move_tail(&as->asynclist, &ps->async_completed); + as->status = urb->status; + signr = as->signr; + if (signr) { + errno = as->status; + addr = as->userurb_sigval; + pid = get_pid(as->pid); + cred = get_cred(as->cred); + } + snoop(&urb->dev->dev, "urb complete\n"); + snoop_urb(urb->dev, as->userurb, urb->pipe, urb->actual_length, + as->status, COMPLETE, NULL, 0); + if (usb_urb_dir_in(urb)) + snoop_urb_data(urb, urb->actual_length); + + if (as->status < 0 && as->bulk_addr && as->status != -ECONNRESET && + as->status != -ENOENT) + cancel_bulk_urbs(ps, as->bulk_addr); + + wake_up(&ps->wait); + spin_unlock_irqrestore(&ps->lock, flags); + + if (signr) { + kill_pid_usb_asyncio(signr, errno, addr, pid, cred); + put_pid(pid); + put_cred(cred); + } +} + +static void destroy_async(struct usb_dev_state *ps, struct list_head *list) +{ + struct urb *urb; + struct async *as; + unsigned long flags; + + spin_lock_irqsave(&ps->lock, flags); + while (!list_empty(list)) { + as = list_last_entry(list, struct async, asynclist); + list_del_init(&as->asynclist); + urb = as->urb; + usb_get_urb(urb); + + /* drop the spinlock so the completion handler can run */ + spin_unlock_irqrestore(&ps->lock, flags); + usb_kill_urb(urb); + usb_put_urb(urb); + spin_lock_irqsave(&ps->lock, flags); + } + spin_unlock_irqrestore(&ps->lock, flags); +} + +static void destroy_async_on_interface(struct usb_dev_state *ps, + unsigned int ifnum) +{ + struct list_head *p, *q, hitlist; + unsigned long flags; + + INIT_LIST_HEAD(&hitlist); + spin_lock_irqsave(&ps->lock, flags); + list_for_each_safe(p, q, &ps->async_pending) + if (ifnum == list_entry(p, struct async, asynclist)->ifnum) + list_move_tail(p, &hitlist); + spin_unlock_irqrestore(&ps->lock, flags); + destroy_async(ps, &hitlist); +} + +static void destroy_all_async(struct usb_dev_state *ps) +{ + destroy_async(ps, &ps->async_pending); +} + +/* + * interface claims are made only at the request of user level code, + * which can also release them (explicitly or by closing files). + * they're also undone when devices disconnect. + */ + +static int driver_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return -ENODEV; +} + +static void driver_disconnect(struct usb_interface *intf) +{ + struct usb_dev_state *ps = usb_get_intfdata(intf); + unsigned int ifnum = intf->altsetting->desc.bInterfaceNumber; + + if (!ps) + return; + + /* NOTE: this relies on usbcore having canceled and completed + * all pending I/O requests; 2.6 does that. + */ + + if (likely(ifnum < 8*sizeof(ps->ifclaimed))) + clear_bit(ifnum, &ps->ifclaimed); + else + dev_warn(&intf->dev, "interface number %u out of range\n", + ifnum); + + usb_set_intfdata(intf, NULL); + + /* force async requests to complete */ + destroy_async_on_interface(ps, ifnum); +} + +/* We don't care about suspend/resume of claimed interfaces */ +static int driver_suspend(struct usb_interface *intf, pm_message_t msg) +{ + return 0; +} + +static int driver_resume(struct usb_interface *intf) +{ + return 0; +} + +#ifdef CONFIG_PM +/* The following routines apply to the entire device, not interfaces */ +void usbfs_notify_suspend(struct usb_device *udev) +{ + /* We don't need to handle this */ +} + +void usbfs_notify_resume(struct usb_device *udev) +{ + struct usb_dev_state *ps; + + /* Protect against simultaneous remove or release */ + mutex_lock(&usbfs_mutex); + list_for_each_entry(ps, &udev->filelist, list) { + WRITE_ONCE(ps->not_yet_resumed, 0); + wake_up_all(&ps->wait_for_resume); + } + mutex_unlock(&usbfs_mutex); +} +#endif + +struct usb_driver usbfs_driver = { + .name = "usbfs", + .probe = driver_probe, + .disconnect = driver_disconnect, + .suspend = driver_suspend, + .resume = driver_resume, + .supports_autosuspend = 1, +}; + +static int claimintf(struct usb_dev_state *ps, unsigned int ifnum) +{ + struct usb_device *dev = ps->dev; + struct usb_interface *intf; + int err; + + if (ifnum >= 8*sizeof(ps->ifclaimed)) + return -EINVAL; + /* already claimed */ + if (test_bit(ifnum, &ps->ifclaimed)) + return 0; + + if (ps->privileges_dropped && + !test_bit(ifnum, &ps->interface_allowed_mask)) + return -EACCES; + + intf = usb_ifnum_to_if(dev, ifnum); + if (!intf) + err = -ENOENT; + else { + unsigned int old_suppress; + + /* suppress uevents while claiming interface */ + old_suppress = dev_get_uevent_suppress(&intf->dev); + dev_set_uevent_suppress(&intf->dev, 1); + err = usb_driver_claim_interface(&usbfs_driver, intf, ps); + dev_set_uevent_suppress(&intf->dev, old_suppress); + } + if (err == 0) + set_bit(ifnum, &ps->ifclaimed); + return err; +} + +static int releaseintf(struct usb_dev_state *ps, unsigned int ifnum) +{ + struct usb_device *dev; + struct usb_interface *intf; + int err; + + err = -EINVAL; + if (ifnum >= 8*sizeof(ps->ifclaimed)) + return err; + dev = ps->dev; + intf = usb_ifnum_to_if(dev, ifnum); + if (!intf) + err = -ENOENT; + else if (test_and_clear_bit(ifnum, &ps->ifclaimed)) { + unsigned int old_suppress; + + /* suppress uevents while releasing interface */ + old_suppress = dev_get_uevent_suppress(&intf->dev); + dev_set_uevent_suppress(&intf->dev, 1); + usb_driver_release_interface(&usbfs_driver, intf); + dev_set_uevent_suppress(&intf->dev, old_suppress); + err = 0; + } + return err; +} + +static int checkintf(struct usb_dev_state *ps, unsigned int ifnum) +{ + if (ps->dev->state != USB_STATE_CONFIGURED) + return -EHOSTUNREACH; + if (ifnum >= 8*sizeof(ps->ifclaimed)) + return -EINVAL; + if (test_bit(ifnum, &ps->ifclaimed)) + return 0; + /* if not yet claimed, claim it for the driver */ + dev_warn(&ps->dev->dev, "usbfs: process %d (%s) did not claim " + "interface %u before use\n", task_pid_nr(current), + current->comm, ifnum); + return claimintf(ps, ifnum); +} + +static int findintfep(struct usb_device *dev, unsigned int ep) +{ + unsigned int i, j, e; + struct usb_interface *intf; + struct usb_host_interface *alts; + struct usb_endpoint_descriptor *endpt; + + if (ep & ~(USB_DIR_IN|0xf)) + return -EINVAL; + if (!dev->actconfig) + return -ESRCH; + for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) { + intf = dev->actconfig->interface[i]; + for (j = 0; j < intf->num_altsetting; j++) { + alts = &intf->altsetting[j]; + for (e = 0; e < alts->desc.bNumEndpoints; e++) { + endpt = &alts->endpoint[e].desc; + if (endpt->bEndpointAddress == ep) + return alts->desc.bInterfaceNumber; + } + } + } + return -ENOENT; +} + +static int check_ctrlrecip(struct usb_dev_state *ps, unsigned int requesttype, + unsigned int request, unsigned int index) +{ + int ret = 0; + struct usb_host_interface *alt_setting; + + if (ps->dev->state != USB_STATE_UNAUTHENTICATED + && ps->dev->state != USB_STATE_ADDRESS + && ps->dev->state != USB_STATE_CONFIGURED) + return -EHOSTUNREACH; + if (USB_TYPE_VENDOR == (USB_TYPE_MASK & requesttype)) + return 0; + + /* + * check for the special corner case 'get_device_id' in the printer + * class specification, which we always want to allow as it is used + * to query things like ink level, etc. + */ + if (requesttype == 0xa1 && request == 0) { + alt_setting = usb_find_alt_setting(ps->dev->actconfig, + index >> 8, index & 0xff); + if (alt_setting + && alt_setting->desc.bInterfaceClass == USB_CLASS_PRINTER) + return 0; + } + + index &= 0xff; + switch (requesttype & USB_RECIP_MASK) { + case USB_RECIP_ENDPOINT: + if ((index & ~USB_DIR_IN) == 0) + return 0; + ret = findintfep(ps->dev, index); + if (ret < 0) { + /* + * Some not fully compliant Win apps seem to get + * index wrong and have the endpoint number here + * rather than the endpoint address (with the + * correct direction). Win does let this through, + * so we'll not reject it here but leave it to + * the device to not break KVM. But we warn. + */ + ret = findintfep(ps->dev, index ^ 0x80); + if (ret >= 0) + dev_info(&ps->dev->dev, + "%s: process %i (%s) requesting ep %02x but needs %02x\n", + __func__, task_pid_nr(current), + current->comm, index, index ^ 0x80); + } + if (ret >= 0) + ret = checkintf(ps, ret); + break; + + case USB_RECIP_INTERFACE: + ret = checkintf(ps, index); + break; + } + return ret; +} + +static struct usb_host_endpoint *ep_to_host_endpoint(struct usb_device *dev, + unsigned char ep) +{ + if (ep & USB_ENDPOINT_DIR_MASK) + return dev->ep_in[ep & USB_ENDPOINT_NUMBER_MASK]; + else + return dev->ep_out[ep & USB_ENDPOINT_NUMBER_MASK]; +} + +static int parse_usbdevfs_streams(struct usb_dev_state *ps, + struct usbdevfs_streams __user *streams, + unsigned int *num_streams_ret, + unsigned int *num_eps_ret, + struct usb_host_endpoint ***eps_ret, + struct usb_interface **intf_ret) +{ + unsigned int i, num_streams, num_eps; + struct usb_host_endpoint **eps; + struct usb_interface *intf = NULL; + unsigned char ep; + int ifnum, ret; + + if (get_user(num_streams, &streams->num_streams) || + get_user(num_eps, &streams->num_eps)) + return -EFAULT; + + if (num_eps < 1 || num_eps > USB_MAXENDPOINTS) + return -EINVAL; + + /* The XHCI controller allows max 2 ^ 16 streams */ + if (num_streams_ret && (num_streams < 2 || num_streams > 65536)) + return -EINVAL; + + eps = kmalloc_array(num_eps, sizeof(*eps), GFP_KERNEL); + if (!eps) + return -ENOMEM; + + for (i = 0; i < num_eps; i++) { + if (get_user(ep, &streams->eps[i])) { + ret = -EFAULT; + goto error; + } + eps[i] = ep_to_host_endpoint(ps->dev, ep); + if (!eps[i]) { + ret = -EINVAL; + goto error; + } + + /* usb_alloc/free_streams operate on an usb_interface */ + ifnum = findintfep(ps->dev, ep); + if (ifnum < 0) { + ret = ifnum; + goto error; + } + + if (i == 0) { + ret = checkintf(ps, ifnum); + if (ret < 0) + goto error; + intf = usb_ifnum_to_if(ps->dev, ifnum); + } else { + /* Verify all eps belong to the same interface */ + if (ifnum != intf->altsetting->desc.bInterfaceNumber) { + ret = -EINVAL; + goto error; + } + } + } + + if (num_streams_ret) + *num_streams_ret = num_streams; + *num_eps_ret = num_eps; + *eps_ret = eps; + *intf_ret = intf; + + return 0; + +error: + kfree(eps); + return ret; +} + +static struct usb_device *usbdev_lookup_by_devt(dev_t devt) +{ + struct device *dev; + + dev = bus_find_device_by_devt(&usb_bus_type, devt); + if (!dev) + return NULL; + return to_usb_device(dev); +} + +/* + * file operations + */ +static int usbdev_open(struct inode *inode, struct file *file) +{ + struct usb_device *dev = NULL; + struct usb_dev_state *ps; + int ret; + + ret = -ENOMEM; + ps = kzalloc(sizeof(struct usb_dev_state), GFP_KERNEL); + if (!ps) + goto out_free_ps; + + ret = -ENODEV; + + /* usbdev device-node */ + if (imajor(inode) == USB_DEVICE_MAJOR) + dev = usbdev_lookup_by_devt(inode->i_rdev); + if (!dev) + goto out_free_ps; + + usb_lock_device(dev); + if (dev->state == USB_STATE_NOTATTACHED) + goto out_unlock_device; + + ret = usb_autoresume_device(dev); + if (ret) + goto out_unlock_device; + + ps->dev = dev; + ps->file = file; + ps->interface_allowed_mask = 0xFFFFFFFF; /* 32 bits */ + spin_lock_init(&ps->lock); + INIT_LIST_HEAD(&ps->list); + INIT_LIST_HEAD(&ps->async_pending); + INIT_LIST_HEAD(&ps->async_completed); + INIT_LIST_HEAD(&ps->memory_list); + init_waitqueue_head(&ps->wait); + init_waitqueue_head(&ps->wait_for_resume); + ps->disc_pid = get_pid(task_pid(current)); + ps->cred = get_current_cred(); + smp_wmb(); + + /* Can't race with resume; the device is already active */ + list_add_tail(&ps->list, &dev->filelist); + file->private_data = ps; + usb_unlock_device(dev); + snoop(&dev->dev, "opened by process %d: %s\n", task_pid_nr(current), + current->comm); + return ret; + + out_unlock_device: + usb_unlock_device(dev); + usb_put_dev(dev); + out_free_ps: + kfree(ps); + return ret; +} + +static int usbdev_release(struct inode *inode, struct file *file) +{ + struct usb_dev_state *ps = file->private_data; + struct usb_device *dev = ps->dev; + unsigned int ifnum; + struct async *as; + + usb_lock_device(dev); + usb_hub_release_all_ports(dev, ps); + + /* Protect against simultaneous resume */ + mutex_lock(&usbfs_mutex); + list_del_init(&ps->list); + mutex_unlock(&usbfs_mutex); + + for (ifnum = 0; ps->ifclaimed && ifnum < 8*sizeof(ps->ifclaimed); + ifnum++) { + if (test_bit(ifnum, &ps->ifclaimed)) + releaseintf(ps, ifnum); + } + destroy_all_async(ps); + if (!ps->suspend_allowed) + usb_autosuspend_device(dev); + usb_unlock_device(dev); + usb_put_dev(dev); + put_pid(ps->disc_pid); + put_cred(ps->cred); + + as = async_getcompleted(ps); + while (as) { + free_async(as); + as = async_getcompleted(ps); + } + + kfree(ps); + return 0; +} + +static void usbfs_blocking_completion(struct urb *urb) +{ + complete((struct completion *) urb->context); +} + +/* + * Much like usb_start_wait_urb, but returns status separately from + * actual_length and uses a killable wait. + */ +static int usbfs_start_wait_urb(struct urb *urb, int timeout, + unsigned int *actlen) +{ + DECLARE_COMPLETION_ONSTACK(ctx); + unsigned long expire; + int rc; + + urb->context = &ctx; + urb->complete = usbfs_blocking_completion; + *actlen = 0; + rc = usb_submit_urb(urb, GFP_KERNEL); + if (unlikely(rc)) + return rc; + + expire = (timeout ? msecs_to_jiffies(timeout) : MAX_SCHEDULE_TIMEOUT); + rc = wait_for_completion_killable_timeout(&ctx, expire); + if (rc <= 0) { + usb_kill_urb(urb); + *actlen = urb->actual_length; + if (urb->status != -ENOENT) + ; /* Completed before it was killed */ + else if (rc < 0) + return -EINTR; + else + return -ETIMEDOUT; + } + *actlen = urb->actual_length; + return urb->status; +} + +static int do_proc_control(struct usb_dev_state *ps, + struct usbdevfs_ctrltransfer *ctrl) +{ + struct usb_device *dev = ps->dev; + unsigned int tmo; + unsigned char *tbuf; + unsigned int wLength, actlen; + int i, pipe, ret; + struct urb *urb = NULL; + struct usb_ctrlrequest *dr = NULL; + + ret = check_ctrlrecip(ps, ctrl->bRequestType, ctrl->bRequest, + ctrl->wIndex); + if (ret) + return ret; + wLength = ctrl->wLength; /* To suppress 64k PAGE_SIZE warning */ + if (wLength > PAGE_SIZE) + return -EINVAL; + ret = usbfs_increase_memory_usage(PAGE_SIZE + sizeof(struct urb) + + sizeof(struct usb_ctrlrequest)); + if (ret) + return ret; + + ret = -ENOMEM; + tbuf = (unsigned char *)__get_free_page(GFP_KERNEL); + if (!tbuf) + goto done; + urb = usb_alloc_urb(0, GFP_NOIO); + if (!urb) + goto done; + dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO); + if (!dr) + goto done; + + dr->bRequestType = ctrl->bRequestType; + dr->bRequest = ctrl->bRequest; + dr->wValue = cpu_to_le16(ctrl->wValue); + dr->wIndex = cpu_to_le16(ctrl->wIndex); + dr->wLength = cpu_to_le16(ctrl->wLength); + + tmo = ctrl->timeout; + snoop(&dev->dev, "control urb: bRequestType=%02x " + "bRequest=%02x wValue=%04x " + "wIndex=%04x wLength=%04x\n", + ctrl->bRequestType, ctrl->bRequest, ctrl->wValue, + ctrl->wIndex, ctrl->wLength); + + if ((ctrl->bRequestType & USB_DIR_IN) && wLength) { + pipe = usb_rcvctrlpipe(dev, 0); + usb_fill_control_urb(urb, dev, pipe, (unsigned char *) dr, tbuf, + wLength, NULL, NULL); + snoop_urb(dev, NULL, pipe, wLength, tmo, SUBMIT, NULL, 0); + + usb_unlock_device(dev); + i = usbfs_start_wait_urb(urb, tmo, &actlen); + + /* Linger a bit, prior to the next control message. */ + if (dev->quirks & USB_QUIRK_DELAY_CTRL_MSG) + msleep(200); + usb_lock_device(dev); + snoop_urb(dev, NULL, pipe, actlen, i, COMPLETE, tbuf, actlen); + if (!i && actlen) { + if (copy_to_user(ctrl->data, tbuf, actlen)) { + ret = -EFAULT; + goto done; + } + } + } else { + if (wLength) { + if (copy_from_user(tbuf, ctrl->data, wLength)) { + ret = -EFAULT; + goto done; + } + } + pipe = usb_sndctrlpipe(dev, 0); + usb_fill_control_urb(urb, dev, pipe, (unsigned char *) dr, tbuf, + wLength, NULL, NULL); + snoop_urb(dev, NULL, pipe, wLength, tmo, SUBMIT, tbuf, wLength); + + usb_unlock_device(dev); + i = usbfs_start_wait_urb(urb, tmo, &actlen); + + /* Linger a bit, prior to the next control message. */ + if (dev->quirks & USB_QUIRK_DELAY_CTRL_MSG) + msleep(200); + usb_lock_device(dev); + snoop_urb(dev, NULL, pipe, actlen, i, COMPLETE, NULL, 0); + } + if (i < 0 && i != -EPIPE) { + dev_printk(KERN_DEBUG, &dev->dev, "usbfs: USBDEVFS_CONTROL " + "failed cmd %s rqt %u rq %u len %u ret %d\n", + current->comm, ctrl->bRequestType, ctrl->bRequest, + ctrl->wLength, i); + } + ret = (i < 0 ? i : actlen); + + done: + kfree(dr); + usb_free_urb(urb); + free_page((unsigned long) tbuf); + usbfs_decrease_memory_usage(PAGE_SIZE + sizeof(struct urb) + + sizeof(struct usb_ctrlrequest)); + return ret; +} + +static int proc_control(struct usb_dev_state *ps, void __user *arg) +{ + struct usbdevfs_ctrltransfer ctrl; + + if (copy_from_user(&ctrl, arg, sizeof(ctrl))) + return -EFAULT; + return do_proc_control(ps, &ctrl); +} + +static int do_proc_bulk(struct usb_dev_state *ps, + struct usbdevfs_bulktransfer *bulk) +{ + struct usb_device *dev = ps->dev; + unsigned int tmo, len1, len2, pipe; + unsigned char *tbuf; + int i, ret; + struct urb *urb = NULL; + struct usb_host_endpoint *ep; + + ret = findintfep(ps->dev, bulk->ep); + if (ret < 0) + return ret; + ret = checkintf(ps, ret); + if (ret) + return ret; + + len1 = bulk->len; + if (len1 < 0 || len1 >= (INT_MAX - sizeof(struct urb))) + return -EINVAL; + + if (bulk->ep & USB_DIR_IN) + pipe = usb_rcvbulkpipe(dev, bulk->ep & 0x7f); + else + pipe = usb_sndbulkpipe(dev, bulk->ep & 0x7f); + ep = usb_pipe_endpoint(dev, pipe); + if (!ep || !usb_endpoint_maxp(&ep->desc)) + return -EINVAL; + ret = usbfs_increase_memory_usage(len1 + sizeof(struct urb)); + if (ret) + return ret; + + /* + * len1 can be almost arbitrarily large. Don't WARN if it's + * too big, just fail the request. + */ + ret = -ENOMEM; + tbuf = kmalloc(len1, GFP_KERNEL | __GFP_NOWARN); + if (!tbuf) + goto done; + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) + goto done; + + if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_INT) { + pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30); + usb_fill_int_urb(urb, dev, pipe, tbuf, len1, + NULL, NULL, ep->desc.bInterval); + } else { + usb_fill_bulk_urb(urb, dev, pipe, tbuf, len1, NULL, NULL); + } + + tmo = bulk->timeout; + if (bulk->ep & 0x80) { + snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT, NULL, 0); + + usb_unlock_device(dev); + i = usbfs_start_wait_urb(urb, tmo, &len2); + usb_lock_device(dev); + snoop_urb(dev, NULL, pipe, len2, i, COMPLETE, tbuf, len2); + + if (!i && len2) { + if (copy_to_user(bulk->data, tbuf, len2)) { + ret = -EFAULT; + goto done; + } + } + } else { + if (len1) { + if (copy_from_user(tbuf, bulk->data, len1)) { + ret = -EFAULT; + goto done; + } + } + snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT, tbuf, len1); + + usb_unlock_device(dev); + i = usbfs_start_wait_urb(urb, tmo, &len2); + usb_lock_device(dev); + snoop_urb(dev, NULL, pipe, len2, i, COMPLETE, NULL, 0); + } + ret = (i < 0 ? i : len2); + done: + usb_free_urb(urb); + kfree(tbuf); + usbfs_decrease_memory_usage(len1 + sizeof(struct urb)); + return ret; +} + +static int proc_bulk(struct usb_dev_state *ps, void __user *arg) +{ + struct usbdevfs_bulktransfer bulk; + + if (copy_from_user(&bulk, arg, sizeof(bulk))) + return -EFAULT; + return do_proc_bulk(ps, &bulk); +} + +static void check_reset_of_active_ep(struct usb_device *udev, + unsigned int epnum, char *ioctl_name) +{ + struct usb_host_endpoint **eps; + struct usb_host_endpoint *ep; + + eps = (epnum & USB_DIR_IN) ? udev->ep_in : udev->ep_out; + ep = eps[epnum & 0x0f]; + if (ep && !list_empty(&ep->urb_list)) + dev_warn(&udev->dev, "Process %d (%s) called USBDEVFS_%s for active endpoint 0x%02x\n", + task_pid_nr(current), current->comm, + ioctl_name, epnum); +} + +static int proc_resetep(struct usb_dev_state *ps, void __user *arg) +{ + unsigned int ep; + int ret; + + if (get_user(ep, (unsigned int __user *)arg)) + return -EFAULT; + ret = findintfep(ps->dev, ep); + if (ret < 0) + return ret; + ret = checkintf(ps, ret); + if (ret) + return ret; + check_reset_of_active_ep(ps->dev, ep, "RESETEP"); + usb_reset_endpoint(ps->dev, ep); + return 0; +} + +static int proc_clearhalt(struct usb_dev_state *ps, void __user *arg) +{ + unsigned int ep; + int pipe; + int ret; + + if (get_user(ep, (unsigned int __user *)arg)) + return -EFAULT; + ret = findintfep(ps->dev, ep); + if (ret < 0) + return ret; + ret = checkintf(ps, ret); + if (ret) + return ret; + check_reset_of_active_ep(ps->dev, ep, "CLEAR_HALT"); + if (ep & USB_DIR_IN) + pipe = usb_rcvbulkpipe(ps->dev, ep & 0x7f); + else + pipe = usb_sndbulkpipe(ps->dev, ep & 0x7f); + + return usb_clear_halt(ps->dev, pipe); +} + +static int proc_getdriver(struct usb_dev_state *ps, void __user *arg) +{ + struct usbdevfs_getdriver gd; + struct usb_interface *intf; + int ret; + + if (copy_from_user(&gd, arg, sizeof(gd))) + return -EFAULT; + intf = usb_ifnum_to_if(ps->dev, gd.interface); + if (!intf || !intf->dev.driver) + ret = -ENODATA; + else { + strscpy(gd.driver, intf->dev.driver->name, + sizeof(gd.driver)); + ret = (copy_to_user(arg, &gd, sizeof(gd)) ? -EFAULT : 0); + } + return ret; +} + +static int proc_connectinfo(struct usb_dev_state *ps, void __user *arg) +{ + struct usbdevfs_connectinfo ci; + + memset(&ci, 0, sizeof(ci)); + ci.devnum = ps->dev->devnum; + ci.slow = ps->dev->speed == USB_SPEED_LOW; + + if (copy_to_user(arg, &ci, sizeof(ci))) + return -EFAULT; + return 0; +} + +static int proc_conninfo_ex(struct usb_dev_state *ps, + void __user *arg, size_t size) +{ + struct usbdevfs_conninfo_ex ci; + struct usb_device *udev = ps->dev; + + if (size < sizeof(ci.size)) + return -EINVAL; + + memset(&ci, 0, sizeof(ci)); + ci.size = sizeof(ci); + ci.busnum = udev->bus->busnum; + ci.devnum = udev->devnum; + ci.speed = udev->speed; + + while (udev && udev->portnum != 0) { + if (++ci.num_ports <= ARRAY_SIZE(ci.ports)) + ci.ports[ARRAY_SIZE(ci.ports) - ci.num_ports] = + udev->portnum; + udev = udev->parent; + } + + if (ci.num_ports < ARRAY_SIZE(ci.ports)) + memmove(&ci.ports[0], + &ci.ports[ARRAY_SIZE(ci.ports) - ci.num_ports], + ci.num_ports); + + if (copy_to_user(arg, &ci, min(sizeof(ci), size))) + return -EFAULT; + + return 0; +} + +static int proc_resetdevice(struct usb_dev_state *ps) +{ + struct usb_host_config *actconfig = ps->dev->actconfig; + struct usb_interface *interface; + int i, number; + + /* Don't allow a device reset if the process has dropped the + * privilege to do such things and any of the interfaces are + * currently claimed. + */ + if (ps->privileges_dropped && actconfig) { + for (i = 0; i < actconfig->desc.bNumInterfaces; ++i) { + interface = actconfig->interface[i]; + number = interface->cur_altsetting->desc.bInterfaceNumber; + if (usb_interface_claimed(interface) && + !test_bit(number, &ps->ifclaimed)) { + dev_warn(&ps->dev->dev, + "usbfs: interface %d claimed by %s while '%s' resets device\n", + number, interface->dev.driver->name, current->comm); + return -EACCES; + } + } + } + + return usb_reset_device(ps->dev); +} + +static int proc_setintf(struct usb_dev_state *ps, void __user *arg) +{ + struct usbdevfs_setinterface setintf; + int ret; + + if (copy_from_user(&setintf, arg, sizeof(setintf))) + return -EFAULT; + ret = checkintf(ps, setintf.interface); + if (ret) + return ret; + + destroy_async_on_interface(ps, setintf.interface); + + return usb_set_interface(ps->dev, setintf.interface, + setintf.altsetting); +} + +static int proc_setconfig(struct usb_dev_state *ps, void __user *arg) +{ + int u; + int status = 0; + struct usb_host_config *actconfig; + + if (get_user(u, (int __user *)arg)) + return -EFAULT; + + actconfig = ps->dev->actconfig; + + /* Don't touch the device if any interfaces are claimed. + * It could interfere with other drivers' operations, and if + * an interface is claimed by usbfs it could easily deadlock. + */ + if (actconfig) { + int i; + + for (i = 0; i < actconfig->desc.bNumInterfaces; ++i) { + if (usb_interface_claimed(actconfig->interface[i])) { + dev_warn(&ps->dev->dev, + "usbfs: interface %d claimed by %s " + "while '%s' sets config #%d\n", + actconfig->interface[i] + ->cur_altsetting + ->desc.bInterfaceNumber, + actconfig->interface[i] + ->dev.driver->name, + current->comm, u); + status = -EBUSY; + break; + } + } + } + + /* SET_CONFIGURATION is often abused as a "cheap" driver reset, + * so avoid usb_set_configuration()'s kick to sysfs + */ + if (status == 0) { + if (actconfig && actconfig->desc.bConfigurationValue == u) + status = usb_reset_configuration(ps->dev); + else + status = usb_set_configuration(ps->dev, u); + } + + return status; +} + +static struct usb_memory * +find_memory_area(struct usb_dev_state *ps, const struct usbdevfs_urb *uurb) +{ + struct usb_memory *usbm = NULL, *iter; + unsigned long flags; + unsigned long uurb_start = (unsigned long)uurb->buffer; + + spin_lock_irqsave(&ps->lock, flags); + list_for_each_entry(iter, &ps->memory_list, memlist) { + if (uurb_start >= iter->vm_start && + uurb_start < iter->vm_start + iter->size) { + if (uurb->buffer_length > iter->vm_start + iter->size - + uurb_start) { + usbm = ERR_PTR(-EINVAL); + } else { + usbm = iter; + usbm->urb_use_count++; + } + break; + } + } + spin_unlock_irqrestore(&ps->lock, flags); + return usbm; +} + +static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb, + struct usbdevfs_iso_packet_desc __user *iso_frame_desc, + void __user *arg, sigval_t userurb_sigval) +{ + struct usbdevfs_iso_packet_desc *isopkt = NULL; + struct usb_host_endpoint *ep; + struct async *as = NULL; + struct usb_ctrlrequest *dr = NULL; + unsigned int u, totlen, isofrmlen; + int i, ret, num_sgs = 0, ifnum = -1; + int number_of_packets = 0; + unsigned int stream_id = 0; + void *buf; + bool is_in; + bool allow_short = false; + bool allow_zero = false; + unsigned long mask = USBDEVFS_URB_SHORT_NOT_OK | + USBDEVFS_URB_BULK_CONTINUATION | + USBDEVFS_URB_NO_FSBR | + USBDEVFS_URB_ZERO_PACKET | + USBDEVFS_URB_NO_INTERRUPT; + /* USBDEVFS_URB_ISO_ASAP is a special case */ + if (uurb->type == USBDEVFS_URB_TYPE_ISO) + mask |= USBDEVFS_URB_ISO_ASAP; + + if (uurb->flags & ~mask) + return -EINVAL; + + if ((unsigned int)uurb->buffer_length >= USBFS_XFER_MAX) + return -EINVAL; + if (uurb->buffer_length > 0 && !uurb->buffer) + return -EINVAL; + if (!(uurb->type == USBDEVFS_URB_TYPE_CONTROL && + (uurb->endpoint & ~USB_ENDPOINT_DIR_MASK) == 0)) { + ifnum = findintfep(ps->dev, uurb->endpoint); + if (ifnum < 0) + return ifnum; + ret = checkintf(ps, ifnum); + if (ret) + return ret; + } + ep = ep_to_host_endpoint(ps->dev, uurb->endpoint); + if (!ep) + return -ENOENT; + is_in = (uurb->endpoint & USB_ENDPOINT_DIR_MASK) != 0; + + u = 0; + switch (uurb->type) { + case USBDEVFS_URB_TYPE_CONTROL: + if (!usb_endpoint_xfer_control(&ep->desc)) + return -EINVAL; + /* min 8 byte setup packet */ + if (uurb->buffer_length < 8) + return -EINVAL; + dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL); + if (!dr) + return -ENOMEM; + if (copy_from_user(dr, uurb->buffer, 8)) { + ret = -EFAULT; + goto error; + } + if (uurb->buffer_length < (le16_to_cpu(dr->wLength) + 8)) { + ret = -EINVAL; + goto error; + } + ret = check_ctrlrecip(ps, dr->bRequestType, dr->bRequest, + le16_to_cpu(dr->wIndex)); + if (ret) + goto error; + uurb->buffer_length = le16_to_cpu(dr->wLength); + uurb->buffer += 8; + if ((dr->bRequestType & USB_DIR_IN) && uurb->buffer_length) { + is_in = true; + uurb->endpoint |= USB_DIR_IN; + } else { + is_in = false; + uurb->endpoint &= ~USB_DIR_IN; + } + if (is_in) + allow_short = true; + snoop(&ps->dev->dev, "control urb: bRequestType=%02x " + "bRequest=%02x wValue=%04x " + "wIndex=%04x wLength=%04x\n", + dr->bRequestType, dr->bRequest, + __le16_to_cpu(dr->wValue), + __le16_to_cpu(dr->wIndex), + __le16_to_cpu(dr->wLength)); + u = sizeof(struct usb_ctrlrequest); + break; + + case USBDEVFS_URB_TYPE_BULK: + if (!is_in) + allow_zero = true; + else + allow_short = true; + switch (usb_endpoint_type(&ep->desc)) { + case USB_ENDPOINT_XFER_CONTROL: + case USB_ENDPOINT_XFER_ISOC: + return -EINVAL; + case USB_ENDPOINT_XFER_INT: + /* allow single-shot interrupt transfers */ + uurb->type = USBDEVFS_URB_TYPE_INTERRUPT; + goto interrupt_urb; + } + num_sgs = DIV_ROUND_UP(uurb->buffer_length, USB_SG_SIZE); + if (num_sgs == 1 || num_sgs > ps->dev->bus->sg_tablesize) + num_sgs = 0; + if (ep->streams) + stream_id = uurb->stream_id; + break; + + case USBDEVFS_URB_TYPE_INTERRUPT: + if (!usb_endpoint_xfer_int(&ep->desc)) + return -EINVAL; + interrupt_urb: + if (!is_in) + allow_zero = true; + else + allow_short = true; + break; + + case USBDEVFS_URB_TYPE_ISO: + /* arbitrary limit */ + if (uurb->number_of_packets < 1 || + uurb->number_of_packets > 128) + return -EINVAL; + if (!usb_endpoint_xfer_isoc(&ep->desc)) + return -EINVAL; + number_of_packets = uurb->number_of_packets; + isofrmlen = sizeof(struct usbdevfs_iso_packet_desc) * + number_of_packets; + isopkt = memdup_user(iso_frame_desc, isofrmlen); + if (IS_ERR(isopkt)) { + ret = PTR_ERR(isopkt); + isopkt = NULL; + goto error; + } + for (totlen = u = 0; u < number_of_packets; u++) { + /* + * arbitrary limit need for USB 3.1 Gen2 + * sizemax: 96 DPs at SSP, 96 * 1024 = 98304 + */ + if (isopkt[u].length > 98304) { + ret = -EINVAL; + goto error; + } + totlen += isopkt[u].length; + } + u *= sizeof(struct usb_iso_packet_descriptor); + uurb->buffer_length = totlen; + break; + + default: + return -EINVAL; + } + + if (uurb->buffer_length > 0 && + !access_ok(uurb->buffer, uurb->buffer_length)) { + ret = -EFAULT; + goto error; + } + as = alloc_async(number_of_packets); + if (!as) { + ret = -ENOMEM; + goto error; + } + + as->usbm = find_memory_area(ps, uurb); + if (IS_ERR(as->usbm)) { + ret = PTR_ERR(as->usbm); + as->usbm = NULL; + goto error; + } + + /* do not use SG buffers when memory mapped segments + * are in use + */ + if (as->usbm) + num_sgs = 0; + + u += sizeof(struct async) + sizeof(struct urb) + + (as->usbm ? 0 : uurb->buffer_length) + + num_sgs * sizeof(struct scatterlist); + ret = usbfs_increase_memory_usage(u); + if (ret) + goto error; + as->mem_usage = u; + + if (num_sgs) { + as->urb->sg = kmalloc_array(num_sgs, + sizeof(struct scatterlist), + GFP_KERNEL | __GFP_NOWARN); + if (!as->urb->sg) { + ret = -ENOMEM; + goto error; + } + as->urb->num_sgs = num_sgs; + sg_init_table(as->urb->sg, as->urb->num_sgs); + + totlen = uurb->buffer_length; + for (i = 0; i < as->urb->num_sgs; i++) { + u = (totlen > USB_SG_SIZE) ? USB_SG_SIZE : totlen; + buf = kmalloc(u, GFP_KERNEL); + if (!buf) { + ret = -ENOMEM; + goto error; + } + sg_set_buf(&as->urb->sg[i], buf, u); + + if (!is_in) { + if (copy_from_user(buf, uurb->buffer, u)) { + ret = -EFAULT; + goto error; + } + uurb->buffer += u; + } + totlen -= u; + } + } else if (uurb->buffer_length > 0) { + if (as->usbm) { + unsigned long uurb_start = (unsigned long)uurb->buffer; + + as->urb->transfer_buffer = as->usbm->mem + + (uurb_start - as->usbm->vm_start); + } else { + as->urb->transfer_buffer = kmalloc(uurb->buffer_length, + GFP_KERNEL | __GFP_NOWARN); + if (!as->urb->transfer_buffer) { + ret = -ENOMEM; + goto error; + } + if (!is_in) { + if (copy_from_user(as->urb->transfer_buffer, + uurb->buffer, + uurb->buffer_length)) { + ret = -EFAULT; + goto error; + } + } else if (uurb->type == USBDEVFS_URB_TYPE_ISO) { + /* + * Isochronous input data may end up being + * discontiguous if some of the packets are + * short. Clear the buffer so that the gaps + * don't leak kernel data to userspace. + */ + memset(as->urb->transfer_buffer, 0, + uurb->buffer_length); + } + } + } + as->urb->dev = ps->dev; + as->urb->pipe = (uurb->type << 30) | + __create_pipe(ps->dev, uurb->endpoint & 0xf) | + (uurb->endpoint & USB_DIR_IN); + + /* This tedious sequence is necessary because the URB_* flags + * are internal to the kernel and subject to change, whereas + * the USBDEVFS_URB_* flags are a user API and must not be changed. + */ + u = (is_in ? URB_DIR_IN : URB_DIR_OUT); + if (uurb->flags & USBDEVFS_URB_ISO_ASAP) + u |= URB_ISO_ASAP; + if (allow_short && uurb->flags & USBDEVFS_URB_SHORT_NOT_OK) + u |= URB_SHORT_NOT_OK; + if (allow_zero && uurb->flags & USBDEVFS_URB_ZERO_PACKET) + u |= URB_ZERO_PACKET; + if (uurb->flags & USBDEVFS_URB_NO_INTERRUPT) + u |= URB_NO_INTERRUPT; + as->urb->transfer_flags = u; + + if (!allow_short && uurb->flags & USBDEVFS_URB_SHORT_NOT_OK) + dev_warn(&ps->dev->dev, "Requested nonsensical USBDEVFS_URB_SHORT_NOT_OK.\n"); + if (!allow_zero && uurb->flags & USBDEVFS_URB_ZERO_PACKET) + dev_warn(&ps->dev->dev, "Requested nonsensical USBDEVFS_URB_ZERO_PACKET.\n"); + + as->urb->transfer_buffer_length = uurb->buffer_length; + as->urb->setup_packet = (unsigned char *)dr; + dr = NULL; + as->urb->start_frame = uurb->start_frame; + as->urb->number_of_packets = number_of_packets; + as->urb->stream_id = stream_id; + + if (ep->desc.bInterval) { + if (uurb->type == USBDEVFS_URB_TYPE_ISO || + ps->dev->speed == USB_SPEED_HIGH || + ps->dev->speed >= USB_SPEED_SUPER) + as->urb->interval = 1 << + min(15, ep->desc.bInterval - 1); + else + as->urb->interval = ep->desc.bInterval; + } + + as->urb->context = as; + as->urb->complete = async_completed; + for (totlen = u = 0; u < number_of_packets; u++) { + as->urb->iso_frame_desc[u].offset = totlen; + as->urb->iso_frame_desc[u].length = isopkt[u].length; + totlen += isopkt[u].length; + } + kfree(isopkt); + isopkt = NULL; + as->ps = ps; + as->userurb = arg; + as->userurb_sigval = userurb_sigval; + if (as->usbm) { + unsigned long uurb_start = (unsigned long)uurb->buffer; + + as->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + as->urb->transfer_dma = as->usbm->dma_handle + + (uurb_start - as->usbm->vm_start); + } else if (is_in && uurb->buffer_length > 0) + as->userbuffer = uurb->buffer; + as->signr = uurb->signr; + as->ifnum = ifnum; + as->pid = get_pid(task_pid(current)); + as->cred = get_current_cred(); + snoop_urb(ps->dev, as->userurb, as->urb->pipe, + as->urb->transfer_buffer_length, 0, SUBMIT, + NULL, 0); + if (!is_in) + snoop_urb_data(as->urb, as->urb->transfer_buffer_length); + + async_newpending(as); + + if (usb_endpoint_xfer_bulk(&ep->desc)) { + spin_lock_irq(&ps->lock); + + /* Not exactly the endpoint address; the direction bit is + * shifted to the 0x10 position so that the value will be + * between 0 and 31. + */ + as->bulk_addr = usb_endpoint_num(&ep->desc) | + ((ep->desc.bEndpointAddress & USB_ENDPOINT_DIR_MASK) + >> 3); + + /* If this bulk URB is the start of a new transfer, re-enable + * the endpoint. Otherwise mark it as a continuation URB. + */ + if (uurb->flags & USBDEVFS_URB_BULK_CONTINUATION) + as->bulk_status = AS_CONTINUATION; + else + ps->disabled_bulk_eps &= ~(1 << as->bulk_addr); + + /* Don't accept continuation URBs if the endpoint is + * disabled because of an earlier error. + */ + if (ps->disabled_bulk_eps & (1 << as->bulk_addr)) + ret = -EREMOTEIO; + else + ret = usb_submit_urb(as->urb, GFP_ATOMIC); + spin_unlock_irq(&ps->lock); + } else { + ret = usb_submit_urb(as->urb, GFP_KERNEL); + } + + if (ret) { + dev_printk(KERN_DEBUG, &ps->dev->dev, + "usbfs: usb_submit_urb returned %d\n", ret); + snoop_urb(ps->dev, as->userurb, as->urb->pipe, + 0, ret, COMPLETE, NULL, 0); + async_removepending(as); + goto error; + } + return 0; + + error: + kfree(isopkt); + kfree(dr); + if (as) + free_async(as); + return ret; +} + +static int proc_submiturb(struct usb_dev_state *ps, void __user *arg) +{ + struct usbdevfs_urb uurb; + sigval_t userurb_sigval; + + if (copy_from_user(&uurb, arg, sizeof(uurb))) + return -EFAULT; + + memset(&userurb_sigval, 0, sizeof(userurb_sigval)); + userurb_sigval.sival_ptr = arg; + + return proc_do_submiturb(ps, &uurb, + (((struct usbdevfs_urb __user *)arg)->iso_frame_desc), + arg, userurb_sigval); +} + +static int proc_unlinkurb(struct usb_dev_state *ps, void __user *arg) +{ + struct urb *urb; + struct async *as; + unsigned long flags; + + spin_lock_irqsave(&ps->lock, flags); + as = async_getpending(ps, arg); + if (!as) { + spin_unlock_irqrestore(&ps->lock, flags); + return -EINVAL; + } + + urb = as->urb; + usb_get_urb(urb); + spin_unlock_irqrestore(&ps->lock, flags); + + usb_kill_urb(urb); + usb_put_urb(urb); + + return 0; +} + +static void compute_isochronous_actual_length(struct urb *urb) +{ + unsigned int i; + + if (urb->number_of_packets > 0) { + urb->actual_length = 0; + for (i = 0; i < urb->number_of_packets; i++) + urb->actual_length += + urb->iso_frame_desc[i].actual_length; + } +} + +static int processcompl(struct async *as, void __user * __user *arg) +{ + struct urb *urb = as->urb; + struct usbdevfs_urb __user *userurb = as->userurb; + void __user *addr = as->userurb; + unsigned int i; + + compute_isochronous_actual_length(urb); + if (as->userbuffer && urb->actual_length) { + if (copy_urb_data_to_user(as->userbuffer, urb)) + goto err_out; + } + if (put_user(as->status, &userurb->status)) + goto err_out; + if (put_user(urb->actual_length, &userurb->actual_length)) + goto err_out; + if (put_user(urb->error_count, &userurb->error_count)) + goto err_out; + + if (usb_endpoint_xfer_isoc(&urb->ep->desc)) { + for (i = 0; i < urb->number_of_packets; i++) { + if (put_user(urb->iso_frame_desc[i].actual_length, + &userurb->iso_frame_desc[i].actual_length)) + goto err_out; + if (put_user(urb->iso_frame_desc[i].status, + &userurb->iso_frame_desc[i].status)) + goto err_out; + } + } + + if (put_user(addr, (void __user * __user *)arg)) + return -EFAULT; + return 0; + +err_out: + return -EFAULT; +} + +static struct async *reap_as(struct usb_dev_state *ps) +{ + DECLARE_WAITQUEUE(wait, current); + struct async *as = NULL; + struct usb_device *dev = ps->dev; + + add_wait_queue(&ps->wait, &wait); + for (;;) { + __set_current_state(TASK_INTERRUPTIBLE); + as = async_getcompleted(ps); + if (as || !connected(ps)) + break; + if (signal_pending(current)) + break; + usb_unlock_device(dev); + schedule(); + usb_lock_device(dev); + } + remove_wait_queue(&ps->wait, &wait); + set_current_state(TASK_RUNNING); + return as; +} + +static int proc_reapurb(struct usb_dev_state *ps, void __user *arg) +{ + struct async *as = reap_as(ps); + + if (as) { + int retval; + + snoop(&ps->dev->dev, "reap %px\n", as->userurb); + retval = processcompl(as, (void __user * __user *)arg); + free_async(as); + return retval; + } + if (signal_pending(current)) + return -EINTR; + return -ENODEV; +} + +static int proc_reapurbnonblock(struct usb_dev_state *ps, void __user *arg) +{ + int retval; + struct async *as; + + as = async_getcompleted(ps); + if (as) { + snoop(&ps->dev->dev, "reap %px\n", as->userurb); + retval = processcompl(as, (void __user * __user *)arg); + free_async(as); + } else { + retval = (connected(ps) ? -EAGAIN : -ENODEV); + } + return retval; +} + +#ifdef CONFIG_COMPAT +static int proc_control_compat(struct usb_dev_state *ps, + struct usbdevfs_ctrltransfer32 __user *p32) +{ + struct usbdevfs_ctrltransfer ctrl; + u32 udata; + + if (copy_from_user(&ctrl, p32, sizeof(*p32) - sizeof(compat_caddr_t)) || + get_user(udata, &p32->data)) + return -EFAULT; + ctrl.data = compat_ptr(udata); + return do_proc_control(ps, &ctrl); +} + +static int proc_bulk_compat(struct usb_dev_state *ps, + struct usbdevfs_bulktransfer32 __user *p32) +{ + struct usbdevfs_bulktransfer bulk; + compat_caddr_t addr; + + if (get_user(bulk.ep, &p32->ep) || + get_user(bulk.len, &p32->len) || + get_user(bulk.timeout, &p32->timeout) || + get_user(addr, &p32->data)) + return -EFAULT; + bulk.data = compat_ptr(addr); + return do_proc_bulk(ps, &bulk); +} + +static int proc_disconnectsignal_compat(struct usb_dev_state *ps, void __user *arg) +{ + struct usbdevfs_disconnectsignal32 ds; + + if (copy_from_user(&ds, arg, sizeof(ds))) + return -EFAULT; + ps->discsignr = ds.signr; + ps->disccontext.sival_int = ds.context; + return 0; +} + +static int get_urb32(struct usbdevfs_urb *kurb, + struct usbdevfs_urb32 __user *uurb) +{ + struct usbdevfs_urb32 urb32; + if (copy_from_user(&urb32, uurb, sizeof(*uurb))) + return -EFAULT; + kurb->type = urb32.type; + kurb->endpoint = urb32.endpoint; + kurb->status = urb32.status; + kurb->flags = urb32.flags; + kurb->buffer = compat_ptr(urb32.buffer); + kurb->buffer_length = urb32.buffer_length; + kurb->actual_length = urb32.actual_length; + kurb->start_frame = urb32.start_frame; + kurb->number_of_packets = urb32.number_of_packets; + kurb->error_count = urb32.error_count; + kurb->signr = urb32.signr; + kurb->usercontext = compat_ptr(urb32.usercontext); + return 0; +} + +static int proc_submiturb_compat(struct usb_dev_state *ps, void __user *arg) +{ + struct usbdevfs_urb uurb; + sigval_t userurb_sigval; + + if (get_urb32(&uurb, (struct usbdevfs_urb32 __user *)arg)) + return -EFAULT; + + memset(&userurb_sigval, 0, sizeof(userurb_sigval)); + userurb_sigval.sival_int = ptr_to_compat(arg); + + return proc_do_submiturb(ps, &uurb, + ((struct usbdevfs_urb32 __user *)arg)->iso_frame_desc, + arg, userurb_sigval); +} + +static int processcompl_compat(struct async *as, void __user * __user *arg) +{ + struct urb *urb = as->urb; + struct usbdevfs_urb32 __user *userurb = as->userurb; + void __user *addr = as->userurb; + unsigned int i; + + compute_isochronous_actual_length(urb); + if (as->userbuffer && urb->actual_length) { + if (copy_urb_data_to_user(as->userbuffer, urb)) + return -EFAULT; + } + if (put_user(as->status, &userurb->status)) + return -EFAULT; + if (put_user(urb->actual_length, &userurb->actual_length)) + return -EFAULT; + if (put_user(urb->error_count, &userurb->error_count)) + return -EFAULT; + + if (usb_endpoint_xfer_isoc(&urb->ep->desc)) { + for (i = 0; i < urb->number_of_packets; i++) { + if (put_user(urb->iso_frame_desc[i].actual_length, + &userurb->iso_frame_desc[i].actual_length)) + return -EFAULT; + if (put_user(urb->iso_frame_desc[i].status, + &userurb->iso_frame_desc[i].status)) + return -EFAULT; + } + } + + if (put_user(ptr_to_compat(addr), (u32 __user *)arg)) + return -EFAULT; + return 0; +} + +static int proc_reapurb_compat(struct usb_dev_state *ps, void __user *arg) +{ + struct async *as = reap_as(ps); + + if (as) { + int retval; + + snoop(&ps->dev->dev, "reap %px\n", as->userurb); + retval = processcompl_compat(as, (void __user * __user *)arg); + free_async(as); + return retval; + } + if (signal_pending(current)) + return -EINTR; + return -ENODEV; +} + +static int proc_reapurbnonblock_compat(struct usb_dev_state *ps, void __user *arg) +{ + int retval; + struct async *as; + + as = async_getcompleted(ps); + if (as) { + snoop(&ps->dev->dev, "reap %px\n", as->userurb); + retval = processcompl_compat(as, (void __user * __user *)arg); + free_async(as); + } else { + retval = (connected(ps) ? -EAGAIN : -ENODEV); + } + return retval; +} + + +#endif + +static int proc_disconnectsignal(struct usb_dev_state *ps, void __user *arg) +{ + struct usbdevfs_disconnectsignal ds; + + if (copy_from_user(&ds, arg, sizeof(ds))) + return -EFAULT; + ps->discsignr = ds.signr; + ps->disccontext.sival_ptr = ds.context; + return 0; +} + +static int proc_claiminterface(struct usb_dev_state *ps, void __user *arg) +{ + unsigned int ifnum; + + if (get_user(ifnum, (unsigned int __user *)arg)) + return -EFAULT; + return claimintf(ps, ifnum); +} + +static int proc_releaseinterface(struct usb_dev_state *ps, void __user *arg) +{ + unsigned int ifnum; + int ret; + + if (get_user(ifnum, (unsigned int __user *)arg)) + return -EFAULT; + ret = releaseintf(ps, ifnum); + if (ret < 0) + return ret; + destroy_async_on_interface(ps, ifnum); + return 0; +} + +static int proc_ioctl(struct usb_dev_state *ps, struct usbdevfs_ioctl *ctl) +{ + int size; + void *buf = NULL; + int retval = 0; + struct usb_interface *intf = NULL; + struct usb_driver *driver = NULL; + + if (ps->privileges_dropped) + return -EACCES; + + if (!connected(ps)) + return -ENODEV; + + /* alloc buffer */ + size = _IOC_SIZE(ctl->ioctl_code); + if (size > 0) { + buf = kmalloc(size, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + if ((_IOC_DIR(ctl->ioctl_code) & _IOC_WRITE)) { + if (copy_from_user(buf, ctl->data, size)) { + kfree(buf); + return -EFAULT; + } + } else { + memset(buf, 0, size); + } + } + + if (ps->dev->state != USB_STATE_CONFIGURED) + retval = -EHOSTUNREACH; + else if (!(intf = usb_ifnum_to_if(ps->dev, ctl->ifno))) + retval = -EINVAL; + else switch (ctl->ioctl_code) { + + /* disconnect kernel driver from interface */ + case USBDEVFS_DISCONNECT: + if (intf->dev.driver) { + driver = to_usb_driver(intf->dev.driver); + dev_dbg(&intf->dev, "disconnect by usbfs\n"); + usb_driver_release_interface(driver, intf); + } else + retval = -ENODATA; + break; + + /* let kernel drivers try to (re)bind to the interface */ + case USBDEVFS_CONNECT: + if (!intf->dev.driver) + retval = device_attach(&intf->dev); + else + retval = -EBUSY; + break; + + /* talk directly to the interface's driver */ + default: + if (intf->dev.driver) + driver = to_usb_driver(intf->dev.driver); + if (driver == NULL || driver->unlocked_ioctl == NULL) { + retval = -ENOTTY; + } else { + retval = driver->unlocked_ioctl(intf, ctl->ioctl_code, buf); + if (retval == -ENOIOCTLCMD) + retval = -ENOTTY; + } + } + + /* cleanup and return */ + if (retval >= 0 + && (_IOC_DIR(ctl->ioctl_code) & _IOC_READ) != 0 + && size > 0 + && copy_to_user(ctl->data, buf, size) != 0) + retval = -EFAULT; + + kfree(buf); + return retval; +} + +static int proc_ioctl_default(struct usb_dev_state *ps, void __user *arg) +{ + struct usbdevfs_ioctl ctrl; + + if (copy_from_user(&ctrl, arg, sizeof(ctrl))) + return -EFAULT; + return proc_ioctl(ps, &ctrl); +} + +#ifdef CONFIG_COMPAT +static int proc_ioctl_compat(struct usb_dev_state *ps, compat_uptr_t arg) +{ + struct usbdevfs_ioctl32 ioc32; + struct usbdevfs_ioctl ctrl; + + if (copy_from_user(&ioc32, compat_ptr(arg), sizeof(ioc32))) + return -EFAULT; + ctrl.ifno = ioc32.ifno; + ctrl.ioctl_code = ioc32.ioctl_code; + ctrl.data = compat_ptr(ioc32.data); + return proc_ioctl(ps, &ctrl); +} +#endif + +static int proc_claim_port(struct usb_dev_state *ps, void __user *arg) +{ + unsigned portnum; + int rc; + + if (get_user(portnum, (unsigned __user *) arg)) + return -EFAULT; + rc = usb_hub_claim_port(ps->dev, portnum, ps); + if (rc == 0) + snoop(&ps->dev->dev, "port %d claimed by process %d: %s\n", + portnum, task_pid_nr(current), current->comm); + return rc; +} + +static int proc_release_port(struct usb_dev_state *ps, void __user *arg) +{ + unsigned portnum; + + if (get_user(portnum, (unsigned __user *) arg)) + return -EFAULT; + return usb_hub_release_port(ps->dev, portnum, ps); +} + +static int proc_get_capabilities(struct usb_dev_state *ps, void __user *arg) +{ + __u32 caps; + + caps = USBDEVFS_CAP_ZERO_PACKET | USBDEVFS_CAP_NO_PACKET_SIZE_LIM | + USBDEVFS_CAP_REAP_AFTER_DISCONNECT | USBDEVFS_CAP_MMAP | + USBDEVFS_CAP_DROP_PRIVILEGES | + USBDEVFS_CAP_CONNINFO_EX | MAYBE_CAP_SUSPEND; + if (!ps->dev->bus->no_stop_on_short) + caps |= USBDEVFS_CAP_BULK_CONTINUATION; + if (ps->dev->bus->sg_tablesize) + caps |= USBDEVFS_CAP_BULK_SCATTER_GATHER; + + if (put_user(caps, (__u32 __user *)arg)) + return -EFAULT; + + return 0; +} + +static int proc_disconnect_claim(struct usb_dev_state *ps, void __user *arg) +{ + struct usbdevfs_disconnect_claim dc; + struct usb_interface *intf; + + if (copy_from_user(&dc, arg, sizeof(dc))) + return -EFAULT; + + intf = usb_ifnum_to_if(ps->dev, dc.interface); + if (!intf) + return -EINVAL; + + if (intf->dev.driver) { + struct usb_driver *driver = to_usb_driver(intf->dev.driver); + + if (ps->privileges_dropped) + return -EACCES; + + if ((dc.flags & USBDEVFS_DISCONNECT_CLAIM_IF_DRIVER) && + strncmp(dc.driver, intf->dev.driver->name, + sizeof(dc.driver)) != 0) + return -EBUSY; + + if ((dc.flags & USBDEVFS_DISCONNECT_CLAIM_EXCEPT_DRIVER) && + strncmp(dc.driver, intf->dev.driver->name, + sizeof(dc.driver)) == 0) + return -EBUSY; + + dev_dbg(&intf->dev, "disconnect by usbfs\n"); + usb_driver_release_interface(driver, intf); + } + + return claimintf(ps, dc.interface); +} + +static int proc_alloc_streams(struct usb_dev_state *ps, void __user *arg) +{ + unsigned num_streams, num_eps; + struct usb_host_endpoint **eps; + struct usb_interface *intf; + int r; + + r = parse_usbdevfs_streams(ps, arg, &num_streams, &num_eps, + &eps, &intf); + if (r) + return r; + + destroy_async_on_interface(ps, + intf->altsetting[0].desc.bInterfaceNumber); + + r = usb_alloc_streams(intf, eps, num_eps, num_streams, GFP_KERNEL); + kfree(eps); + return r; +} + +static int proc_free_streams(struct usb_dev_state *ps, void __user *arg) +{ + unsigned num_eps; + struct usb_host_endpoint **eps; + struct usb_interface *intf; + int r; + + r = parse_usbdevfs_streams(ps, arg, NULL, &num_eps, &eps, &intf); + if (r) + return r; + + destroy_async_on_interface(ps, + intf->altsetting[0].desc.bInterfaceNumber); + + r = usb_free_streams(intf, eps, num_eps, GFP_KERNEL); + kfree(eps); + return r; +} + +static int proc_drop_privileges(struct usb_dev_state *ps, void __user *arg) +{ + u32 data; + + if (copy_from_user(&data, arg, sizeof(data))) + return -EFAULT; + + /* This is a one way operation. Once privileges are + * dropped, you cannot regain them. You may however reissue + * this ioctl to shrink the allowed interfaces mask. + */ + ps->interface_allowed_mask &= data; + ps->privileges_dropped = true; + + return 0; +} + +static int proc_forbid_suspend(struct usb_dev_state *ps) +{ + int ret = 0; + + if (ps->suspend_allowed) { + ret = usb_autoresume_device(ps->dev); + if (ret == 0) + ps->suspend_allowed = false; + else if (ret != -ENODEV) + ret = -EIO; + } + return ret; +} + +static int proc_allow_suspend(struct usb_dev_state *ps) +{ + if (!connected(ps)) + return -ENODEV; + + WRITE_ONCE(ps->not_yet_resumed, 1); + if (!ps->suspend_allowed) { + usb_autosuspend_device(ps->dev); + ps->suspend_allowed = true; + } + return 0; +} + +static int proc_wait_for_resume(struct usb_dev_state *ps) +{ + int ret; + + usb_unlock_device(ps->dev); + ret = wait_event_interruptible(ps->wait_for_resume, + READ_ONCE(ps->not_yet_resumed) == 0); + usb_lock_device(ps->dev); + + if (ret != 0) + return -EINTR; + return proc_forbid_suspend(ps); +} + +/* + * NOTE: All requests here that have interface numbers as parameters + * are assuming that somehow the configuration has been prevented from + * changing. But there's no mechanism to ensure that... + */ +static long usbdev_do_ioctl(struct file *file, unsigned int cmd, + void __user *p) +{ + struct usb_dev_state *ps = file->private_data; + struct inode *inode = file_inode(file); + struct usb_device *dev = ps->dev; + int ret = -ENOTTY; + + if (!(file->f_mode & FMODE_WRITE)) + return -EPERM; + + usb_lock_device(dev); + + /* Reap operations are allowed even after disconnection */ + switch (cmd) { + case USBDEVFS_REAPURB: + snoop(&dev->dev, "%s: REAPURB\n", __func__); + ret = proc_reapurb(ps, p); + goto done; + + case USBDEVFS_REAPURBNDELAY: + snoop(&dev->dev, "%s: REAPURBNDELAY\n", __func__); + ret = proc_reapurbnonblock(ps, p); + goto done; + +#ifdef CONFIG_COMPAT + case USBDEVFS_REAPURB32: + snoop(&dev->dev, "%s: REAPURB32\n", __func__); + ret = proc_reapurb_compat(ps, p); + goto done; + + case USBDEVFS_REAPURBNDELAY32: + snoop(&dev->dev, "%s: REAPURBNDELAY32\n", __func__); + ret = proc_reapurbnonblock_compat(ps, p); + goto done; +#endif + } + + if (!connected(ps)) { + usb_unlock_device(dev); + return -ENODEV; + } + + switch (cmd) { + case USBDEVFS_CONTROL: + snoop(&dev->dev, "%s: CONTROL\n", __func__); + ret = proc_control(ps, p); + if (ret >= 0) + inode->i_mtime = current_time(inode); + break; + + case USBDEVFS_BULK: + snoop(&dev->dev, "%s: BULK\n", __func__); + ret = proc_bulk(ps, p); + if (ret >= 0) + inode->i_mtime = current_time(inode); + break; + + case USBDEVFS_RESETEP: + snoop(&dev->dev, "%s: RESETEP\n", __func__); + ret = proc_resetep(ps, p); + if (ret >= 0) + inode->i_mtime = current_time(inode); + break; + + case USBDEVFS_RESET: + snoop(&dev->dev, "%s: RESET\n", __func__); + ret = proc_resetdevice(ps); + break; + + case USBDEVFS_CLEAR_HALT: + snoop(&dev->dev, "%s: CLEAR_HALT\n", __func__); + ret = proc_clearhalt(ps, p); + if (ret >= 0) + inode->i_mtime = current_time(inode); + break; + + case USBDEVFS_GETDRIVER: + snoop(&dev->dev, "%s: GETDRIVER\n", __func__); + ret = proc_getdriver(ps, p); + break; + + case USBDEVFS_CONNECTINFO: + snoop(&dev->dev, "%s: CONNECTINFO\n", __func__); + ret = proc_connectinfo(ps, p); + break; + + case USBDEVFS_SETINTERFACE: + snoop(&dev->dev, "%s: SETINTERFACE\n", __func__); + ret = proc_setintf(ps, p); + break; + + case USBDEVFS_SETCONFIGURATION: + snoop(&dev->dev, "%s: SETCONFIGURATION\n", __func__); + ret = proc_setconfig(ps, p); + break; + + case USBDEVFS_SUBMITURB: + snoop(&dev->dev, "%s: SUBMITURB\n", __func__); + ret = proc_submiturb(ps, p); + if (ret >= 0) + inode->i_mtime = current_time(inode); + break; + +#ifdef CONFIG_COMPAT + case USBDEVFS_CONTROL32: + snoop(&dev->dev, "%s: CONTROL32\n", __func__); + ret = proc_control_compat(ps, p); + if (ret >= 0) + inode->i_mtime = current_time(inode); + break; + + case USBDEVFS_BULK32: + snoop(&dev->dev, "%s: BULK32\n", __func__); + ret = proc_bulk_compat(ps, p); + if (ret >= 0) + inode->i_mtime = current_time(inode); + break; + + case USBDEVFS_DISCSIGNAL32: + snoop(&dev->dev, "%s: DISCSIGNAL32\n", __func__); + ret = proc_disconnectsignal_compat(ps, p); + break; + + case USBDEVFS_SUBMITURB32: + snoop(&dev->dev, "%s: SUBMITURB32\n", __func__); + ret = proc_submiturb_compat(ps, p); + if (ret >= 0) + inode->i_mtime = current_time(inode); + break; + + case USBDEVFS_IOCTL32: + snoop(&dev->dev, "%s: IOCTL32\n", __func__); + ret = proc_ioctl_compat(ps, ptr_to_compat(p)); + break; +#endif + + case USBDEVFS_DISCARDURB: + snoop(&dev->dev, "%s: DISCARDURB %px\n", __func__, p); + ret = proc_unlinkurb(ps, p); + break; + + case USBDEVFS_DISCSIGNAL: + snoop(&dev->dev, "%s: DISCSIGNAL\n", __func__); + ret = proc_disconnectsignal(ps, p); + break; + + case USBDEVFS_CLAIMINTERFACE: + snoop(&dev->dev, "%s: CLAIMINTERFACE\n", __func__); + ret = proc_claiminterface(ps, p); + break; + + case USBDEVFS_RELEASEINTERFACE: + snoop(&dev->dev, "%s: RELEASEINTERFACE\n", __func__); + ret = proc_releaseinterface(ps, p); + break; + + case USBDEVFS_IOCTL: + snoop(&dev->dev, "%s: IOCTL\n", __func__); + ret = proc_ioctl_default(ps, p); + break; + + case USBDEVFS_CLAIM_PORT: + snoop(&dev->dev, "%s: CLAIM_PORT\n", __func__); + ret = proc_claim_port(ps, p); + break; + + case USBDEVFS_RELEASE_PORT: + snoop(&dev->dev, "%s: RELEASE_PORT\n", __func__); + ret = proc_release_port(ps, p); + break; + case USBDEVFS_GET_CAPABILITIES: + ret = proc_get_capabilities(ps, p); + break; + case USBDEVFS_DISCONNECT_CLAIM: + ret = proc_disconnect_claim(ps, p); + break; + case USBDEVFS_ALLOC_STREAMS: + ret = proc_alloc_streams(ps, p); + break; + case USBDEVFS_FREE_STREAMS: + ret = proc_free_streams(ps, p); + break; + case USBDEVFS_DROP_PRIVILEGES: + ret = proc_drop_privileges(ps, p); + break; + case USBDEVFS_GET_SPEED: + ret = ps->dev->speed; + break; + case USBDEVFS_FORBID_SUSPEND: + ret = proc_forbid_suspend(ps); + break; + case USBDEVFS_ALLOW_SUSPEND: + ret = proc_allow_suspend(ps); + break; + case USBDEVFS_WAIT_FOR_RESUME: + ret = proc_wait_for_resume(ps); + break; + } + + /* Handle variable-length commands */ + switch (cmd & ~IOCSIZE_MASK) { + case USBDEVFS_CONNINFO_EX(0): + ret = proc_conninfo_ex(ps, p, _IOC_SIZE(cmd)); + break; + } + + done: + usb_unlock_device(dev); + if (ret >= 0) + inode->i_atime = current_time(inode); + return ret; +} + +static long usbdev_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int ret; + + ret = usbdev_do_ioctl(file, cmd, (void __user *)arg); + + return ret; +} + +/* No kernel lock - fine */ +static __poll_t usbdev_poll(struct file *file, + struct poll_table_struct *wait) +{ + struct usb_dev_state *ps = file->private_data; + __poll_t mask = 0; + + poll_wait(file, &ps->wait, wait); + if (file->f_mode & FMODE_WRITE && !list_empty(&ps->async_completed)) + mask |= EPOLLOUT | EPOLLWRNORM; + if (!connected(ps)) + mask |= EPOLLHUP; + if (list_empty(&ps->list)) + mask |= EPOLLERR; + return mask; +} + +const struct file_operations usbdev_file_operations = { + .owner = THIS_MODULE, + .llseek = no_seek_end_llseek, + .read = usbdev_read, + .poll = usbdev_poll, + .unlocked_ioctl = usbdev_ioctl, + .compat_ioctl = compat_ptr_ioctl, + .mmap = usbdev_mmap, + .open = usbdev_open, + .release = usbdev_release, +}; + +static void usbdev_remove(struct usb_device *udev) +{ + struct usb_dev_state *ps; + + /* Protect against simultaneous resume */ + mutex_lock(&usbfs_mutex); + while (!list_empty(&udev->filelist)) { + ps = list_entry(udev->filelist.next, struct usb_dev_state, list); + destroy_all_async(ps); + wake_up_all(&ps->wait); + WRITE_ONCE(ps->not_yet_resumed, 0); + wake_up_all(&ps->wait_for_resume); + list_del_init(&ps->list); + if (ps->discsignr) + kill_pid_usb_asyncio(ps->discsignr, EPIPE, ps->disccontext, + ps->disc_pid, ps->cred); + } + mutex_unlock(&usbfs_mutex); +} + +static int usbdev_notify(struct notifier_block *self, + unsigned long action, void *dev) +{ + switch (action) { + case USB_DEVICE_ADD: + break; + case USB_DEVICE_REMOVE: + usbdev_remove(dev); + break; + } + return NOTIFY_OK; +} + +static struct notifier_block usbdev_nb = { + .notifier_call = usbdev_notify, +}; + +static struct cdev usb_device_cdev; + +int __init usb_devio_init(void) +{ + int retval; + + retval = register_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX, + "usb_device"); + if (retval) { + printk(KERN_ERR "Unable to register minors for usb_device\n"); + goto out; + } + cdev_init(&usb_device_cdev, &usbdev_file_operations); + retval = cdev_add(&usb_device_cdev, USB_DEVICE_DEV, USB_DEVICE_MAX); + if (retval) { + printk(KERN_ERR "Unable to get usb_device major %d\n", + USB_DEVICE_MAJOR); + goto error_cdev; + } + usb_register_notify(&usbdev_nb); +out: + return retval; + +error_cdev: + unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX); + goto out; +} + +void usb_devio_cleanup(void) +{ + usb_unregister_notify(&usbdev_nb); + cdev_del(&usb_device_cdev); + unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX); +} diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c new file mode 100644 index 000000000..7e7e119c2 --- /dev/null +++ b/drivers/usb/core/driver.c @@ -0,0 +1,2033 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * drivers/usb/core/driver.c - most of the driver model stuff for usb + * + * (C) Copyright 2005 Greg Kroah-Hartman <gregkh@suse.de> + * + * based on drivers/usb/usb.c which had the following copyrights: + * (C) Copyright Linus Torvalds 1999 + * (C) Copyright Johannes Erdfelt 1999-2001 + * (C) Copyright Andreas Gal 1999 + * (C) Copyright Gregory P. Smith 1999 + * (C) Copyright Deti Fliegl 1999 (new USB architecture) + * (C) Copyright Randy Dunlap 2000 + * (C) Copyright David Brownell 2000-2004 + * (C) Copyright Yggdrasil Computing, Inc. 2000 + * (usb_device_id matching changes by Adam J. Richter) + * (C) Copyright Greg Kroah-Hartman 2002-2003 + * + * Released under the GPLv2 only. + * + * NOTE! This is not actually a driver at all, rather this is + * just a collection of helper routines that implement the + * matching, probing, releasing, suspending and resuming for + * real drivers. + * + */ + +#include <linux/device.h> +#include <linux/slab.h> +#include <linux/export.h> +#include <linux/usb.h> +#include <linux/usb/quirks.h> +#include <linux/usb/hcd.h> + +#include "usb.h" + + +/* + * Adds a new dynamic USBdevice ID to this driver, + * and cause the driver to probe for all devices again. + */ +ssize_t usb_store_new_id(struct usb_dynids *dynids, + const struct usb_device_id *id_table, + struct device_driver *driver, + const char *buf, size_t count) +{ + struct usb_dynid *dynid; + u32 idVendor = 0; + u32 idProduct = 0; + unsigned int bInterfaceClass = 0; + u32 refVendor, refProduct; + int fields = 0; + int retval = 0; + + fields = sscanf(buf, "%x %x %x %x %x", &idVendor, &idProduct, + &bInterfaceClass, &refVendor, &refProduct); + if (fields < 2) + return -EINVAL; + + dynid = kzalloc(sizeof(*dynid), GFP_KERNEL); + if (!dynid) + return -ENOMEM; + + INIT_LIST_HEAD(&dynid->node); + dynid->id.idVendor = idVendor; + dynid->id.idProduct = idProduct; + dynid->id.match_flags = USB_DEVICE_ID_MATCH_DEVICE; + if (fields > 2 && bInterfaceClass) { + if (bInterfaceClass > 255) { + retval = -EINVAL; + goto fail; + } + + dynid->id.bInterfaceClass = (u8)bInterfaceClass; + dynid->id.match_flags |= USB_DEVICE_ID_MATCH_INT_CLASS; + } + + if (fields > 4) { + const struct usb_device_id *id = id_table; + + if (!id) { + retval = -ENODEV; + goto fail; + } + + for (; id->match_flags; id++) + if (id->idVendor == refVendor && id->idProduct == refProduct) + break; + + if (id->match_flags) { + dynid->id.driver_info = id->driver_info; + } else { + retval = -ENODEV; + goto fail; + } + } + + spin_lock(&dynids->lock); + list_add_tail(&dynid->node, &dynids->list); + spin_unlock(&dynids->lock); + + retval = driver_attach(driver); + + if (retval) + return retval; + return count; + +fail: + kfree(dynid); + return retval; +} +EXPORT_SYMBOL_GPL(usb_store_new_id); + +ssize_t usb_show_dynids(struct usb_dynids *dynids, char *buf) +{ + struct usb_dynid *dynid; + size_t count = 0; + + list_for_each_entry(dynid, &dynids->list, node) + if (dynid->id.bInterfaceClass != 0) + count += scnprintf(&buf[count], PAGE_SIZE - count, "%04x %04x %02x\n", + dynid->id.idVendor, dynid->id.idProduct, + dynid->id.bInterfaceClass); + else + count += scnprintf(&buf[count], PAGE_SIZE - count, "%04x %04x\n", + dynid->id.idVendor, dynid->id.idProduct); + return count; +} +EXPORT_SYMBOL_GPL(usb_show_dynids); + +static ssize_t new_id_show(struct device_driver *driver, char *buf) +{ + struct usb_driver *usb_drv = to_usb_driver(driver); + + return usb_show_dynids(&usb_drv->dynids, buf); +} + +static ssize_t new_id_store(struct device_driver *driver, + const char *buf, size_t count) +{ + struct usb_driver *usb_drv = to_usb_driver(driver); + + return usb_store_new_id(&usb_drv->dynids, usb_drv->id_table, driver, buf, count); +} +static DRIVER_ATTR_RW(new_id); + +/* + * Remove a USB device ID from this driver + */ +static ssize_t remove_id_store(struct device_driver *driver, const char *buf, + size_t count) +{ + struct usb_dynid *dynid, *n; + struct usb_driver *usb_driver = to_usb_driver(driver); + u32 idVendor; + u32 idProduct; + int fields; + + fields = sscanf(buf, "%x %x", &idVendor, &idProduct); + if (fields < 2) + return -EINVAL; + + spin_lock(&usb_driver->dynids.lock); + list_for_each_entry_safe(dynid, n, &usb_driver->dynids.list, node) { + struct usb_device_id *id = &dynid->id; + + if ((id->idVendor == idVendor) && + (id->idProduct == idProduct)) { + list_del(&dynid->node); + kfree(dynid); + break; + } + } + spin_unlock(&usb_driver->dynids.lock); + return count; +} + +static ssize_t remove_id_show(struct device_driver *driver, char *buf) +{ + return new_id_show(driver, buf); +} +static DRIVER_ATTR_RW(remove_id); + +static int usb_create_newid_files(struct usb_driver *usb_drv) +{ + int error = 0; + + if (usb_drv->no_dynamic_id) + goto exit; + + if (usb_drv->probe != NULL) { + error = driver_create_file(&usb_drv->drvwrap.driver, + &driver_attr_new_id); + if (error == 0) { + error = driver_create_file(&usb_drv->drvwrap.driver, + &driver_attr_remove_id); + if (error) + driver_remove_file(&usb_drv->drvwrap.driver, + &driver_attr_new_id); + } + } +exit: + return error; +} + +static void usb_remove_newid_files(struct usb_driver *usb_drv) +{ + if (usb_drv->no_dynamic_id) + return; + + if (usb_drv->probe != NULL) { + driver_remove_file(&usb_drv->drvwrap.driver, + &driver_attr_remove_id); + driver_remove_file(&usb_drv->drvwrap.driver, + &driver_attr_new_id); + } +} + +static void usb_free_dynids(struct usb_driver *usb_drv) +{ + struct usb_dynid *dynid, *n; + + spin_lock(&usb_drv->dynids.lock); + list_for_each_entry_safe(dynid, n, &usb_drv->dynids.list, node) { + list_del(&dynid->node); + kfree(dynid); + } + spin_unlock(&usb_drv->dynids.lock); +} + +static const struct usb_device_id *usb_match_dynamic_id(struct usb_interface *intf, + struct usb_driver *drv) +{ + struct usb_dynid *dynid; + + spin_lock(&drv->dynids.lock); + list_for_each_entry(dynid, &drv->dynids.list, node) { + if (usb_match_one_id(intf, &dynid->id)) { + spin_unlock(&drv->dynids.lock); + return &dynid->id; + } + } + spin_unlock(&drv->dynids.lock); + return NULL; +} + + +/* called from driver core with dev locked */ +static int usb_probe_device(struct device *dev) +{ + struct usb_device_driver *udriver = to_usb_device_driver(dev->driver); + struct usb_device *udev = to_usb_device(dev); + int error = 0; + + dev_dbg(dev, "%s\n", __func__); + + /* TODO: Add real matching code */ + + /* The device should always appear to be in use + * unless the driver supports autosuspend. + */ + if (!udriver->supports_autosuspend) + error = usb_autoresume_device(udev); + if (error) + return error; + + if (udriver->generic_subclass) + error = usb_generic_driver_probe(udev); + if (error) + return error; + + /* Probe the USB device with the driver in hand, but only + * defer to a generic driver in case the current USB + * device driver has an id_table or a match function; i.e., + * when the device driver was explicitly matched against + * a device. + * + * If the device driver does not have either of these, + * then we assume that it can bind to any device and is + * not truly a more specialized/non-generic driver, so a + * return value of -ENODEV should not force the device + * to be handled by the generic USB driver, as there + * can still be another, more specialized, device driver. + * + * This accommodates the usbip driver. + * + * TODO: What if, in the future, there are multiple + * specialized USB device drivers for a particular device? + * In such cases, there is a need to try all matching + * specialised device drivers prior to setting the + * use_generic_driver bit. + */ + error = udriver->probe(udev); + if (error == -ENODEV && udriver != &usb_generic_driver && + (udriver->id_table || udriver->match)) { + udev->use_generic_driver = 1; + return -EPROBE_DEFER; + } + return error; +} + +/* called from driver core with dev locked */ +static int usb_unbind_device(struct device *dev) +{ + struct usb_device *udev = to_usb_device(dev); + struct usb_device_driver *udriver = to_usb_device_driver(dev->driver); + + if (udriver->disconnect) + udriver->disconnect(udev); + if (udriver->generic_subclass) + usb_generic_driver_disconnect(udev); + if (!udriver->supports_autosuspend) + usb_autosuspend_device(udev); + return 0; +} + +/* called from driver core with dev locked */ +static int usb_probe_interface(struct device *dev) +{ + struct usb_driver *driver = to_usb_driver(dev->driver); + struct usb_interface *intf = to_usb_interface(dev); + struct usb_device *udev = interface_to_usbdev(intf); + const struct usb_device_id *id; + int error = -ENODEV; + int lpm_disable_error = -ENODEV; + + dev_dbg(dev, "%s\n", __func__); + + intf->needs_binding = 0; + + if (usb_device_is_owned(udev)) + return error; + + if (udev->authorized == 0) { + dev_err(&intf->dev, "Device is not authorized for usage\n"); + return error; + } else if (intf->authorized == 0) { + dev_err(&intf->dev, "Interface %d is not authorized for usage\n", + intf->altsetting->desc.bInterfaceNumber); + return error; + } + + id = usb_match_dynamic_id(intf, driver); + if (!id) + id = usb_match_id(intf, driver->id_table); + if (!id) + return error; + + dev_dbg(dev, "%s - got id\n", __func__); + + error = usb_autoresume_device(udev); + if (error) + return error; + + intf->condition = USB_INTERFACE_BINDING; + + /* Probed interfaces are initially active. They are + * runtime-PM-enabled only if the driver has autosuspend support. + * They are sensitive to their children's power states. + */ + pm_runtime_set_active(dev); + pm_suspend_ignore_children(dev, false); + if (driver->supports_autosuspend) + pm_runtime_enable(dev); + + /* If the new driver doesn't allow hub-initiated LPM, and we can't + * disable hub-initiated LPM, then fail the probe. + * + * Otherwise, leaving LPM enabled should be harmless, because the + * endpoint intervals should remain the same, and the U1/U2 timeouts + * should remain the same. + * + * If we need to install alt setting 0 before probe, or another alt + * setting during probe, that should also be fine. usb_set_interface() + * will attempt to disable LPM, and fail if it can't disable it. + */ + if (driver->disable_hub_initiated_lpm) { + lpm_disable_error = usb_unlocked_disable_lpm(udev); + if (lpm_disable_error) { + dev_err(&intf->dev, "%s Failed to disable LPM for driver %s\n", + __func__, driver->name); + error = lpm_disable_error; + goto err; + } + } + + /* Carry out a deferred switch to altsetting 0 */ + if (intf->needs_altsetting0) { + error = usb_set_interface(udev, intf->altsetting[0]. + desc.bInterfaceNumber, 0); + if (error < 0) + goto err; + intf->needs_altsetting0 = 0; + } + + error = driver->probe(intf, id); + if (error) + goto err; + + intf->condition = USB_INTERFACE_BOUND; + + /* If the LPM disable succeeded, balance the ref counts. */ + if (!lpm_disable_error) + usb_unlocked_enable_lpm(udev); + + usb_autosuspend_device(udev); + return error; + + err: + usb_set_intfdata(intf, NULL); + intf->needs_remote_wakeup = 0; + intf->condition = USB_INTERFACE_UNBOUND; + + /* If the LPM disable succeeded, balance the ref counts. */ + if (!lpm_disable_error) + usb_unlocked_enable_lpm(udev); + + /* Unbound interfaces are always runtime-PM-disabled and -suspended */ + if (driver->supports_autosuspend) + pm_runtime_disable(dev); + pm_runtime_set_suspended(dev); + + usb_autosuspend_device(udev); + return error; +} + +/* called from driver core with dev locked */ +static int usb_unbind_interface(struct device *dev) +{ + struct usb_driver *driver = to_usb_driver(dev->driver); + struct usb_interface *intf = to_usb_interface(dev); + struct usb_host_endpoint *ep, **eps = NULL; + struct usb_device *udev; + int i, j, error, r; + int lpm_disable_error = -ENODEV; + + intf->condition = USB_INTERFACE_UNBINDING; + + /* Autoresume for set_interface call below */ + udev = interface_to_usbdev(intf); + error = usb_autoresume_device(udev); + + /* If hub-initiated LPM policy may change, attempt to disable LPM until + * the driver is unbound. If LPM isn't disabled, that's fine because it + * wouldn't be enabled unless all the bound interfaces supported + * hub-initiated LPM. + */ + if (driver->disable_hub_initiated_lpm) + lpm_disable_error = usb_unlocked_disable_lpm(udev); + + /* + * Terminate all URBs for this interface unless the driver + * supports "soft" unbinding and the device is still present. + */ + if (!driver->soft_unbind || udev->state == USB_STATE_NOTATTACHED) + usb_disable_interface(udev, intf, false); + + driver->disconnect(intf); + + /* Free streams */ + for (i = 0, j = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) { + ep = &intf->cur_altsetting->endpoint[i]; + if (ep->streams == 0) + continue; + if (j == 0) { + eps = kmalloc_array(USB_MAXENDPOINTS, sizeof(void *), + GFP_KERNEL); + if (!eps) + break; + } + eps[j++] = ep; + } + if (j) { + usb_free_streams(intf, eps, j, GFP_KERNEL); + kfree(eps); + } + + /* Reset other interface state. + * We cannot do a Set-Interface if the device is suspended or + * if it is prepared for a system sleep (since installing a new + * altsetting means creating new endpoint device entries). + * When either of these happens, defer the Set-Interface. + */ + if (intf->cur_altsetting->desc.bAlternateSetting == 0) { + /* Already in altsetting 0 so skip Set-Interface. + * Just re-enable it without affecting the endpoint toggles. + */ + usb_enable_interface(udev, intf, false); + } else if (!error && !intf->dev.power.is_prepared) { + r = usb_set_interface(udev, intf->altsetting[0]. + desc.bInterfaceNumber, 0); + if (r < 0) + intf->needs_altsetting0 = 1; + } else { + intf->needs_altsetting0 = 1; + } + usb_set_intfdata(intf, NULL); + + intf->condition = USB_INTERFACE_UNBOUND; + intf->needs_remote_wakeup = 0; + + /* Attempt to re-enable USB3 LPM, if the disable succeeded. */ + if (!lpm_disable_error) + usb_unlocked_enable_lpm(udev); + + /* Unbound interfaces are always runtime-PM-disabled and -suspended */ + if (driver->supports_autosuspend) + pm_runtime_disable(dev); + pm_runtime_set_suspended(dev); + + if (!error) + usb_autosuspend_device(udev); + + return 0; +} + +/** + * usb_driver_claim_interface - bind a driver to an interface + * @driver: the driver to be bound + * @iface: the interface to which it will be bound; must be in the + * usb device's active configuration + * @data: driver data associated with that interface + * + * This is used by usb device drivers that need to claim more than one + * interface on a device when probing (audio and acm are current examples). + * No device driver should directly modify internal usb_interface or + * usb_device structure members. + * + * Callers must own the device lock, so driver probe() entries don't need + * extra locking, but other call contexts may need to explicitly claim that + * lock. + * + * Return: 0 on success. + */ +int usb_driver_claim_interface(struct usb_driver *driver, + struct usb_interface *iface, void *data) +{ + struct device *dev; + int retval = 0; + + if (!iface) + return -ENODEV; + + dev = &iface->dev; + if (dev->driver) + return -EBUSY; + + /* reject claim if interface is not authorized */ + if (!iface->authorized) + return -ENODEV; + + dev->driver = &driver->drvwrap.driver; + usb_set_intfdata(iface, data); + iface->needs_binding = 0; + + iface->condition = USB_INTERFACE_BOUND; + + /* Claimed interfaces are initially inactive (suspended) and + * runtime-PM-enabled, but only if the driver has autosuspend + * support. Otherwise they are marked active, to prevent the + * device from being autosuspended, but left disabled. In either + * case they are sensitive to their children's power states. + */ + pm_suspend_ignore_children(dev, false); + if (driver->supports_autosuspend) + pm_runtime_enable(dev); + else + pm_runtime_set_active(dev); + + /* if interface was already added, bind now; else let + * the future device_add() bind it, bypassing probe() + */ + if (device_is_registered(dev)) + retval = device_bind_driver(dev); + + if (retval) { + dev->driver = NULL; + usb_set_intfdata(iface, NULL); + iface->needs_remote_wakeup = 0; + iface->condition = USB_INTERFACE_UNBOUND; + + /* + * Unbound interfaces are always runtime-PM-disabled + * and runtime-PM-suspended + */ + if (driver->supports_autosuspend) + pm_runtime_disable(dev); + pm_runtime_set_suspended(dev); + } + + return retval; +} +EXPORT_SYMBOL_GPL(usb_driver_claim_interface); + +/** + * usb_driver_release_interface - unbind a driver from an interface + * @driver: the driver to be unbound + * @iface: the interface from which it will be unbound + * + * This can be used by drivers to release an interface without waiting + * for their disconnect() methods to be called. In typical cases this + * also causes the driver disconnect() method to be called. + * + * This call is synchronous, and may not be used in an interrupt context. + * Callers must own the device lock, so driver disconnect() entries don't + * need extra locking, but other call contexts may need to explicitly claim + * that lock. + */ +void usb_driver_release_interface(struct usb_driver *driver, + struct usb_interface *iface) +{ + struct device *dev = &iface->dev; + + /* this should never happen, don't release something that's not ours */ + if (!dev->driver || dev->driver != &driver->drvwrap.driver) + return; + + /* don't release from within disconnect() */ + if (iface->condition != USB_INTERFACE_BOUND) + return; + iface->condition = USB_INTERFACE_UNBINDING; + + /* Release via the driver core only if the interface + * has already been registered + */ + if (device_is_registered(dev)) { + device_release_driver(dev); + } else { + device_lock(dev); + usb_unbind_interface(dev); + dev->driver = NULL; + device_unlock(dev); + } +} +EXPORT_SYMBOL_GPL(usb_driver_release_interface); + +/* returns 0 if no match, 1 if match */ +int usb_match_device(struct usb_device *dev, const struct usb_device_id *id) +{ + if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && + id->idVendor != le16_to_cpu(dev->descriptor.idVendor)) + return 0; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) && + id->idProduct != le16_to_cpu(dev->descriptor.idProduct)) + return 0; + + /* No need to test id->bcdDevice_lo != 0, since 0 is never + greater than any unsigned number. */ + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) && + (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice))) + return 0; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) && + (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice))) + return 0; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) && + (id->bDeviceClass != dev->descriptor.bDeviceClass)) + return 0; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) && + (id->bDeviceSubClass != dev->descriptor.bDeviceSubClass)) + return 0; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) && + (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol)) + return 0; + + return 1; +} + +/* returns 0 if no match, 1 if match */ +int usb_match_one_id_intf(struct usb_device *dev, + struct usb_host_interface *intf, + const struct usb_device_id *id) +{ + /* The interface class, subclass, protocol and number should never be + * checked for a match if the device class is Vendor Specific, + * unless the match record specifies the Vendor ID. */ + if (dev->descriptor.bDeviceClass == USB_CLASS_VENDOR_SPEC && + !(id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && + (id->match_flags & (USB_DEVICE_ID_MATCH_INT_CLASS | + USB_DEVICE_ID_MATCH_INT_SUBCLASS | + USB_DEVICE_ID_MATCH_INT_PROTOCOL | + USB_DEVICE_ID_MATCH_INT_NUMBER))) + return 0; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_CLASS) && + (id->bInterfaceClass != intf->desc.bInterfaceClass)) + return 0; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_SUBCLASS) && + (id->bInterfaceSubClass != intf->desc.bInterfaceSubClass)) + return 0; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_PROTOCOL) && + (id->bInterfaceProtocol != intf->desc.bInterfaceProtocol)) + return 0; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_NUMBER) && + (id->bInterfaceNumber != intf->desc.bInterfaceNumber)) + return 0; + + return 1; +} + +/* returns 0 if no match, 1 if match */ +int usb_match_one_id(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_host_interface *intf; + struct usb_device *dev; + + /* proc_connectinfo in devio.c may call us with id == NULL. */ + if (id == NULL) + return 0; + + intf = interface->cur_altsetting; + dev = interface_to_usbdev(interface); + + if (!usb_match_device(dev, id)) + return 0; + + return usb_match_one_id_intf(dev, intf, id); +} +EXPORT_SYMBOL_GPL(usb_match_one_id); + +/** + * usb_match_id - find first usb_device_id matching device or interface + * @interface: the interface of interest + * @id: array of usb_device_id structures, terminated by zero entry + * + * usb_match_id searches an array of usb_device_id's and returns + * the first one matching the device or interface, or null. + * This is used when binding (or rebinding) a driver to an interface. + * Most USB device drivers will use this indirectly, through the usb core, + * but some layered driver frameworks use it directly. + * These device tables are exported with MODULE_DEVICE_TABLE, through + * modutils, to support the driver loading functionality of USB hotplugging. + * + * Return: The first matching usb_device_id, or %NULL. + * + * What Matches: + * + * The "match_flags" element in a usb_device_id controls which + * members are used. If the corresponding bit is set, the + * value in the device_id must match its corresponding member + * in the device or interface descriptor, or else the device_id + * does not match. + * + * "driver_info" is normally used only by device drivers, + * but you can create a wildcard "matches anything" usb_device_id + * as a driver's "modules.usbmap" entry if you provide an id with + * only a nonzero "driver_info" field. If you do this, the USB device + * driver's probe() routine should use additional intelligence to + * decide whether to bind to the specified interface. + * + * What Makes Good usb_device_id Tables: + * + * The match algorithm is very simple, so that intelligence in + * driver selection must come from smart driver id records. + * Unless you have good reasons to use another selection policy, + * provide match elements only in related groups, and order match + * specifiers from specific to general. Use the macros provided + * for that purpose if you can. + * + * The most specific match specifiers use device descriptor + * data. These are commonly used with product-specific matches; + * the USB_DEVICE macro lets you provide vendor and product IDs, + * and you can also match against ranges of product revisions. + * These are widely used for devices with application or vendor + * specific bDeviceClass values. + * + * Matches based on device class/subclass/protocol specifications + * are slightly more general; use the USB_DEVICE_INFO macro, or + * its siblings. These are used with single-function devices + * where bDeviceClass doesn't specify that each interface has + * its own class. + * + * Matches based on interface class/subclass/protocol are the + * most general; they let drivers bind to any interface on a + * multiple-function device. Use the USB_INTERFACE_INFO + * macro, or its siblings, to match class-per-interface style + * devices (as recorded in bInterfaceClass). + * + * Note that an entry created by USB_INTERFACE_INFO won't match + * any interface if the device class is set to Vendor-Specific. + * This is deliberate; according to the USB spec the meanings of + * the interface class/subclass/protocol for these devices are also + * vendor-specific, and hence matching against a standard product + * class wouldn't work anyway. If you really want to use an + * interface-based match for such a device, create a match record + * that also specifies the vendor ID. (Unforunately there isn't a + * standard macro for creating records like this.) + * + * Within those groups, remember that not all combinations are + * meaningful. For example, don't give a product version range + * without vendor and product IDs; or specify a protocol without + * its associated class and subclass. + */ +const struct usb_device_id *usb_match_id(struct usb_interface *interface, + const struct usb_device_id *id) +{ + /* proc_connectinfo in devio.c may call us with id == NULL. */ + if (id == NULL) + return NULL; + + /* It is important to check that id->driver_info is nonzero, + since an entry that is all zeroes except for a nonzero + id->driver_info is the way to create an entry that + indicates that the driver want to examine every + device and interface. */ + for (; id->idVendor || id->idProduct || id->bDeviceClass || + id->bInterfaceClass || id->driver_info; id++) { + if (usb_match_one_id(interface, id)) + return id; + } + + return NULL; +} +EXPORT_SYMBOL_GPL(usb_match_id); + +const struct usb_device_id *usb_device_match_id(struct usb_device *udev, + const struct usb_device_id *id) +{ + if (!id) + return NULL; + + for (; id->idVendor || id->idProduct ; id++) { + if (usb_match_device(udev, id)) + return id; + } + + return NULL; +} +EXPORT_SYMBOL_GPL(usb_device_match_id); + +bool usb_driver_applicable(struct usb_device *udev, + struct usb_device_driver *udrv) +{ + if (udrv->id_table && udrv->match) + return usb_device_match_id(udev, udrv->id_table) != NULL && + udrv->match(udev); + + if (udrv->id_table) + return usb_device_match_id(udev, udrv->id_table) != NULL; + + if (udrv->match) + return udrv->match(udev); + + return false; +} + +static int usb_device_match(struct device *dev, struct device_driver *drv) +{ + /* devices and interfaces are handled separately */ + if (is_usb_device(dev)) { + struct usb_device *udev; + struct usb_device_driver *udrv; + + /* interface drivers never match devices */ + if (!is_usb_device_driver(drv)) + return 0; + + udev = to_usb_device(dev); + udrv = to_usb_device_driver(drv); + + /* If the device driver under consideration does not have a + * id_table or a match function, then let the driver's probe + * function decide. + */ + if (!udrv->id_table && !udrv->match) + return 1; + + return usb_driver_applicable(udev, udrv); + + } else if (is_usb_interface(dev)) { + struct usb_interface *intf; + struct usb_driver *usb_drv; + const struct usb_device_id *id; + + /* device drivers never match interfaces */ + if (is_usb_device_driver(drv)) + return 0; + + intf = to_usb_interface(dev); + usb_drv = to_usb_driver(drv); + + id = usb_match_id(intf, usb_drv->id_table); + if (id) + return 1; + + id = usb_match_dynamic_id(intf, usb_drv); + if (id) + return 1; + } + + return 0; +} + +static int usb_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + struct usb_device *usb_dev; + + if (is_usb_device(dev)) { + usb_dev = to_usb_device(dev); + } else if (is_usb_interface(dev)) { + struct usb_interface *intf = to_usb_interface(dev); + + usb_dev = interface_to_usbdev(intf); + } else { + return 0; + } + + if (usb_dev->devnum < 0) { + /* driver is often null here; dev_dbg() would oops */ + pr_debug("usb %s: already deleted?\n", dev_name(dev)); + return -ENODEV; + } + if (!usb_dev->bus) { + pr_debug("usb %s: bus removed?\n", dev_name(dev)); + return -ENODEV; + } + + /* per-device configurations are common */ + if (add_uevent_var(env, "PRODUCT=%x/%x/%x", + le16_to_cpu(usb_dev->descriptor.idVendor), + le16_to_cpu(usb_dev->descriptor.idProduct), + le16_to_cpu(usb_dev->descriptor.bcdDevice))) + return -ENOMEM; + + /* class-based driver binding models */ + if (add_uevent_var(env, "TYPE=%d/%d/%d", + usb_dev->descriptor.bDeviceClass, + usb_dev->descriptor.bDeviceSubClass, + usb_dev->descriptor.bDeviceProtocol)) + return -ENOMEM; + + return 0; +} + +static int __usb_bus_reprobe_drivers(struct device *dev, void *data) +{ + struct usb_device_driver *new_udriver = data; + struct usb_device *udev; + int ret; + + /* Don't reprobe if current driver isn't usb_generic_driver */ + if (dev->driver != &usb_generic_driver.drvwrap.driver) + return 0; + + udev = to_usb_device(dev); + if (!usb_driver_applicable(udev, new_udriver)) + return 0; + + ret = device_reprobe(dev); + if (ret && ret != -EPROBE_DEFER) + dev_err(dev, "Failed to reprobe device (error %d)\n", ret); + + return 0; +} + +/** + * usb_register_device_driver - register a USB device (not interface) driver + * @new_udriver: USB operations for the device driver + * @owner: module owner of this driver. + * + * Registers a USB device driver with the USB core. The list of + * unattached devices will be rescanned whenever a new driver is + * added, allowing the new driver to attach to any recognized devices. + * + * Return: A negative error code on failure and 0 on success. + */ +int usb_register_device_driver(struct usb_device_driver *new_udriver, + struct module *owner) +{ + int retval = 0; + + if (usb_disabled()) + return -ENODEV; + + new_udriver->drvwrap.for_devices = 1; + new_udriver->drvwrap.driver.name = new_udriver->name; + new_udriver->drvwrap.driver.bus = &usb_bus_type; + new_udriver->drvwrap.driver.probe = usb_probe_device; + new_udriver->drvwrap.driver.remove = usb_unbind_device; + new_udriver->drvwrap.driver.owner = owner; + new_udriver->drvwrap.driver.dev_groups = new_udriver->dev_groups; + + retval = driver_register(&new_udriver->drvwrap.driver); + + if (!retval) { + pr_info("%s: registered new device driver %s\n", + usbcore_name, new_udriver->name); + /* + * Check whether any device could be better served with + * this new driver + */ + bus_for_each_dev(&usb_bus_type, NULL, new_udriver, + __usb_bus_reprobe_drivers); + } else { + pr_err("%s: error %d registering device driver %s\n", + usbcore_name, retval, new_udriver->name); + } + + return retval; +} +EXPORT_SYMBOL_GPL(usb_register_device_driver); + +/** + * usb_deregister_device_driver - unregister a USB device (not interface) driver + * @udriver: USB operations of the device driver to unregister + * Context: must be able to sleep + * + * Unlinks the specified driver from the internal USB driver list. + */ +void usb_deregister_device_driver(struct usb_device_driver *udriver) +{ + pr_info("%s: deregistering device driver %s\n", + usbcore_name, udriver->name); + + driver_unregister(&udriver->drvwrap.driver); +} +EXPORT_SYMBOL_GPL(usb_deregister_device_driver); + +/** + * usb_register_driver - register a USB interface driver + * @new_driver: USB operations for the interface driver + * @owner: module owner of this driver. + * @mod_name: module name string + * + * Registers a USB interface driver with the USB core. The list of + * unattached interfaces will be rescanned whenever a new driver is + * added, allowing the new driver to attach to any recognized interfaces. + * + * Return: A negative error code on failure and 0 on success. + * + * NOTE: if you want your driver to use the USB major number, you must call + * usb_register_dev() to enable that functionality. This function no longer + * takes care of that. + */ +int usb_register_driver(struct usb_driver *new_driver, struct module *owner, + const char *mod_name) +{ + int retval = 0; + + if (usb_disabled()) + return -ENODEV; + + new_driver->drvwrap.for_devices = 0; + new_driver->drvwrap.driver.name = new_driver->name; + new_driver->drvwrap.driver.bus = &usb_bus_type; + new_driver->drvwrap.driver.probe = usb_probe_interface; + new_driver->drvwrap.driver.remove = usb_unbind_interface; + new_driver->drvwrap.driver.owner = owner; + new_driver->drvwrap.driver.mod_name = mod_name; + new_driver->drvwrap.driver.dev_groups = new_driver->dev_groups; + spin_lock_init(&new_driver->dynids.lock); + INIT_LIST_HEAD(&new_driver->dynids.list); + + retval = driver_register(&new_driver->drvwrap.driver); + if (retval) + goto out; + + retval = usb_create_newid_files(new_driver); + if (retval) + goto out_newid; + + pr_info("%s: registered new interface driver %s\n", + usbcore_name, new_driver->name); + +out: + return retval; + +out_newid: + driver_unregister(&new_driver->drvwrap.driver); + + pr_err("%s: error %d registering interface driver %s\n", + usbcore_name, retval, new_driver->name); + goto out; +} +EXPORT_SYMBOL_GPL(usb_register_driver); + +/** + * usb_deregister - unregister a USB interface driver + * @driver: USB operations of the interface driver to unregister + * Context: must be able to sleep + * + * Unlinks the specified driver from the internal USB driver list. + * + * NOTE: If you called usb_register_dev(), you still need to call + * usb_deregister_dev() to clean up your driver's allocated minor numbers, + * this * call will no longer do it for you. + */ +void usb_deregister(struct usb_driver *driver) +{ + pr_info("%s: deregistering interface driver %s\n", + usbcore_name, driver->name); + + usb_remove_newid_files(driver); + driver_unregister(&driver->drvwrap.driver); + usb_free_dynids(driver); +} +EXPORT_SYMBOL_GPL(usb_deregister); + +/* Forced unbinding of a USB interface driver, either because + * it doesn't support pre_reset/post_reset/reset_resume or + * because it doesn't support suspend/resume. + * + * The caller must hold @intf's device's lock, but not @intf's lock. + */ +void usb_forced_unbind_intf(struct usb_interface *intf) +{ + struct usb_driver *driver = to_usb_driver(intf->dev.driver); + + dev_dbg(&intf->dev, "forced unbind\n"); + usb_driver_release_interface(driver, intf); + + /* Mark the interface for later rebinding */ + intf->needs_binding = 1; +} + +/* + * Unbind drivers for @udev's marked interfaces. These interfaces have + * the needs_binding flag set, for example by usb_resume_interface(). + * + * The caller must hold @udev's device lock. + */ +static void unbind_marked_interfaces(struct usb_device *udev) +{ + struct usb_host_config *config; + int i; + struct usb_interface *intf; + + config = udev->actconfig; + if (config) { + for (i = 0; i < config->desc.bNumInterfaces; ++i) { + intf = config->interface[i]; + if (intf->dev.driver && intf->needs_binding) + usb_forced_unbind_intf(intf); + } + } +} + +/* Delayed forced unbinding of a USB interface driver and scan + * for rebinding. + * + * The caller must hold @intf's device's lock, but not @intf's lock. + * + * Note: Rebinds will be skipped if a system sleep transition is in + * progress and the PM "complete" callback hasn't occurred yet. + */ +static void usb_rebind_intf(struct usb_interface *intf) +{ + int rc; + + /* Delayed unbind of an existing driver */ + if (intf->dev.driver) + usb_forced_unbind_intf(intf); + + /* Try to rebind the interface */ + if (!intf->dev.power.is_prepared) { + intf->needs_binding = 0; + rc = device_attach(&intf->dev); + if (rc < 0 && rc != -EPROBE_DEFER) + dev_warn(&intf->dev, "rebind failed: %d\n", rc); + } +} + +/* + * Rebind drivers to @udev's marked interfaces. These interfaces have + * the needs_binding flag set. + * + * The caller must hold @udev's device lock. + */ +static void rebind_marked_interfaces(struct usb_device *udev) +{ + struct usb_host_config *config; + int i; + struct usb_interface *intf; + + config = udev->actconfig; + if (config) { + for (i = 0; i < config->desc.bNumInterfaces; ++i) { + intf = config->interface[i]; + if (intf->needs_binding) + usb_rebind_intf(intf); + } + } +} + +/* + * Unbind all of @udev's marked interfaces and then rebind all of them. + * This ordering is necessary because some drivers claim several interfaces + * when they are first probed. + * + * The caller must hold @udev's device lock. + */ +void usb_unbind_and_rebind_marked_interfaces(struct usb_device *udev) +{ + unbind_marked_interfaces(udev); + rebind_marked_interfaces(udev); +} + +#ifdef CONFIG_PM + +/* Unbind drivers for @udev's interfaces that don't support suspend/resume + * There is no check for reset_resume here because it can be determined + * only during resume whether reset_resume is needed. + * + * The caller must hold @udev's device lock. + */ +static void unbind_no_pm_drivers_interfaces(struct usb_device *udev) +{ + struct usb_host_config *config; + int i; + struct usb_interface *intf; + struct usb_driver *drv; + + config = udev->actconfig; + if (config) { + for (i = 0; i < config->desc.bNumInterfaces; ++i) { + intf = config->interface[i]; + + if (intf->dev.driver) { + drv = to_usb_driver(intf->dev.driver); + if (!drv->suspend || !drv->resume) + usb_forced_unbind_intf(intf); + } + } + } +} + +static int usb_suspend_device(struct usb_device *udev, pm_message_t msg) +{ + struct usb_device_driver *udriver; + int status = 0; + + if (udev->state == USB_STATE_NOTATTACHED || + udev->state == USB_STATE_SUSPENDED) + goto done; + + /* For devices that don't have a driver, we do a generic suspend. */ + if (udev->dev.driver) + udriver = to_usb_device_driver(udev->dev.driver); + else { + udev->do_remote_wakeup = 0; + udriver = &usb_generic_driver; + } + if (udriver->suspend) + status = udriver->suspend(udev, msg); + if (status == 0 && udriver->generic_subclass) + status = usb_generic_driver_suspend(udev, msg); + + done: + dev_vdbg(&udev->dev, "%s: status %d\n", __func__, status); + return status; +} + +static int usb_resume_device(struct usb_device *udev, pm_message_t msg) +{ + struct usb_device_driver *udriver; + int status = 0; + + if (udev->state == USB_STATE_NOTATTACHED) + goto done; + + /* Can't resume it if it doesn't have a driver. */ + if (udev->dev.driver == NULL) { + status = -ENOTCONN; + goto done; + } + + /* Non-root devices on a full/low-speed bus must wait for their + * companion high-speed root hub, in case a handoff is needed. + */ + if (!PMSG_IS_AUTO(msg) && udev->parent && udev->bus->hs_companion) + device_pm_wait_for_dev(&udev->dev, + &udev->bus->hs_companion->root_hub->dev); + + if (udev->quirks & USB_QUIRK_RESET_RESUME) + udev->reset_resume = 1; + + udriver = to_usb_device_driver(udev->dev.driver); + if (udriver->generic_subclass) + status = usb_generic_driver_resume(udev, msg); + if (status == 0 && udriver->resume) + status = udriver->resume(udev, msg); + + done: + dev_vdbg(&udev->dev, "%s: status %d\n", __func__, status); + return status; +} + +static int usb_suspend_interface(struct usb_device *udev, + struct usb_interface *intf, pm_message_t msg) +{ + struct usb_driver *driver; + int status = 0; + + if (udev->state == USB_STATE_NOTATTACHED || + intf->condition == USB_INTERFACE_UNBOUND) + goto done; + driver = to_usb_driver(intf->dev.driver); + + /* at this time we know the driver supports suspend */ + status = driver->suspend(intf, msg); + if (status && !PMSG_IS_AUTO(msg)) + dev_err(&intf->dev, "suspend error %d\n", status); + + done: + dev_vdbg(&intf->dev, "%s: status %d\n", __func__, status); + return status; +} + +static int usb_resume_interface(struct usb_device *udev, + struct usb_interface *intf, pm_message_t msg, int reset_resume) +{ + struct usb_driver *driver; + int status = 0; + + if (udev->state == USB_STATE_NOTATTACHED) + goto done; + + /* Don't let autoresume interfere with unbinding */ + if (intf->condition == USB_INTERFACE_UNBINDING) + goto done; + + /* Can't resume it if it doesn't have a driver. */ + if (intf->condition == USB_INTERFACE_UNBOUND) { + + /* Carry out a deferred switch to altsetting 0 */ + if (intf->needs_altsetting0 && !intf->dev.power.is_prepared) { + usb_set_interface(udev, intf->altsetting[0]. + desc.bInterfaceNumber, 0); + intf->needs_altsetting0 = 0; + } + goto done; + } + + /* Don't resume if the interface is marked for rebinding */ + if (intf->needs_binding) + goto done; + driver = to_usb_driver(intf->dev.driver); + + if (reset_resume) { + if (driver->reset_resume) { + status = driver->reset_resume(intf); + if (status) + dev_err(&intf->dev, "%s error %d\n", + "reset_resume", status); + } else { + intf->needs_binding = 1; + dev_dbg(&intf->dev, "no reset_resume for driver %s?\n", + driver->name); + } + } else { + status = driver->resume(intf); + if (status) + dev_err(&intf->dev, "resume error %d\n", status); + } + +done: + dev_vdbg(&intf->dev, "%s: status %d\n", __func__, status); + + /* Later we will unbind the driver and/or reprobe, if necessary */ + return status; +} + +/** + * usb_suspend_both - suspend a USB device and its interfaces + * @udev: the usb_device to suspend + * @msg: Power Management message describing this state transition + * + * This is the central routine for suspending USB devices. It calls the + * suspend methods for all the interface drivers in @udev and then calls + * the suspend method for @udev itself. When the routine is called in + * autosuspend, if an error occurs at any stage, all the interfaces + * which were suspended are resumed so that they remain in the same + * state as the device, but when called from system sleep, all error + * from suspend methods of interfaces and the non-root-hub device itself + * are simply ignored, so all suspended interfaces are only resumed + * to the device's state when @udev is root-hub and its suspend method + * returns failure. + * + * Autosuspend requests originating from a child device or an interface + * driver may be made without the protection of @udev's device lock, but + * all other suspend calls will hold the lock. Usbcore will insure that + * method calls do not arrive during bind, unbind, or reset operations. + * However drivers must be prepared to handle suspend calls arriving at + * unpredictable times. + * + * This routine can run only in process context. + * + * Return: 0 if the suspend succeeded. + */ +static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) +{ + int status = 0; + int i = 0, n = 0; + struct usb_interface *intf; + + if (udev->state == USB_STATE_NOTATTACHED || + udev->state == USB_STATE_SUSPENDED) + goto done; + + /* Suspend all the interfaces and then udev itself */ + if (udev->actconfig) { + n = udev->actconfig->desc.bNumInterfaces; + for (i = n - 1; i >= 0; --i) { + intf = udev->actconfig->interface[i]; + status = usb_suspend_interface(udev, intf, msg); + + /* Ignore errors during system sleep transitions */ + if (!PMSG_IS_AUTO(msg)) + status = 0; + if (status != 0) + break; + } + } + if (status == 0) { + status = usb_suspend_device(udev, msg); + + /* + * Ignore errors from non-root-hub devices during + * system sleep transitions. For the most part, + * these devices should go to low power anyway when + * the entire bus is suspended. + */ + if (udev->parent && !PMSG_IS_AUTO(msg)) + status = 0; + + /* + * If the device is inaccessible, don't try to resume + * suspended interfaces and just return the error. + */ + if (status && status != -EBUSY) { + int err; + u16 devstat; + + err = usb_get_std_status(udev, USB_RECIP_DEVICE, 0, + &devstat); + if (err) { + dev_err(&udev->dev, + "Failed to suspend device, error %d\n", + status); + goto done; + } + } + } + + /* If the suspend failed, resume interfaces that did get suspended */ + if (status != 0) { + if (udev->actconfig) { + msg.event ^= (PM_EVENT_SUSPEND | PM_EVENT_RESUME); + while (++i < n) { + intf = udev->actconfig->interface[i]; + usb_resume_interface(udev, intf, msg, 0); + } + } + + /* If the suspend succeeded then prevent any more URB submissions + * and flush any outstanding URBs. + */ + } else { + udev->can_submit = 0; + for (i = 0; i < 16; ++i) { + usb_hcd_flush_endpoint(udev, udev->ep_out[i]); + usb_hcd_flush_endpoint(udev, udev->ep_in[i]); + } + } + + done: + dev_vdbg(&udev->dev, "%s: status %d\n", __func__, status); + return status; +} + +/** + * usb_resume_both - resume a USB device and its interfaces + * @udev: the usb_device to resume + * @msg: Power Management message describing this state transition + * + * This is the central routine for resuming USB devices. It calls the + * resume method for @udev and then calls the resume methods for all + * the interface drivers in @udev. + * + * Autoresume requests originating from a child device or an interface + * driver may be made without the protection of @udev's device lock, but + * all other resume calls will hold the lock. Usbcore will insure that + * method calls do not arrive during bind, unbind, or reset operations. + * However drivers must be prepared to handle resume calls arriving at + * unpredictable times. + * + * This routine can run only in process context. + * + * Return: 0 on success. + */ +static int usb_resume_both(struct usb_device *udev, pm_message_t msg) +{ + int status = 0; + int i; + struct usb_interface *intf; + + if (udev->state == USB_STATE_NOTATTACHED) { + status = -ENODEV; + goto done; + } + udev->can_submit = 1; + + /* Resume the device */ + if (udev->state == USB_STATE_SUSPENDED || udev->reset_resume) + status = usb_resume_device(udev, msg); + + /* Resume the interfaces */ + if (status == 0 && udev->actconfig) { + for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { + intf = udev->actconfig->interface[i]; + usb_resume_interface(udev, intf, msg, + udev->reset_resume); + } + } + usb_mark_last_busy(udev); + + done: + dev_vdbg(&udev->dev, "%s: status %d\n", __func__, status); + if (!status) + udev->reset_resume = 0; + return status; +} + +static void choose_wakeup(struct usb_device *udev, pm_message_t msg) +{ + int w; + + /* + * For FREEZE/QUIESCE, disable remote wakeups so no interrupts get + * generated. + */ + if (msg.event == PM_EVENT_FREEZE || msg.event == PM_EVENT_QUIESCE) { + w = 0; + + } else { + /* + * Enable remote wakeup if it is allowed, even if no interface + * drivers actually want it. + */ + w = device_may_wakeup(&udev->dev); + } + + /* + * If the device is autosuspended with the wrong wakeup setting, + * autoresume now so the setting can be changed. + */ + if (udev->state == USB_STATE_SUSPENDED && w != udev->do_remote_wakeup) + pm_runtime_resume(&udev->dev); + udev->do_remote_wakeup = w; +} + +/* The device lock is held by the PM core */ +int usb_suspend(struct device *dev, pm_message_t msg) +{ + struct usb_device *udev = to_usb_device(dev); + int r; + + unbind_no_pm_drivers_interfaces(udev); + + /* From now on we are sure all drivers support suspend/resume + * but not necessarily reset_resume() + * so we may still need to unbind and rebind upon resume + */ + choose_wakeup(udev, msg); + r = usb_suspend_both(udev, msg); + if (r) + return r; + + if (udev->quirks & USB_QUIRK_DISCONNECT_SUSPEND) + usb_port_disable(udev); + + return 0; +} + +/* The device lock is held by the PM core */ +int usb_resume_complete(struct device *dev) +{ + struct usb_device *udev = to_usb_device(dev); + + /* For PM complete calls, all we do is rebind interfaces + * whose needs_binding flag is set + */ + if (udev->state != USB_STATE_NOTATTACHED) + rebind_marked_interfaces(udev); + return 0; +} + +/* The device lock is held by the PM core */ +int usb_resume(struct device *dev, pm_message_t msg) +{ + struct usb_device *udev = to_usb_device(dev); + int status; + + /* For all calls, take the device back to full power and + * tell the PM core in case it was autosuspended previously. + * Unbind the interfaces that will need rebinding later, + * because they fail to support reset_resume. + * (This can't be done in usb_resume_interface() + * above because it doesn't own the right set of locks.) + */ + status = usb_resume_both(udev, msg); + if (status == 0) { + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + unbind_marked_interfaces(udev); + } + + /* Avoid PM error messages for devices disconnected while suspended + * as we'll display regular disconnect messages just a bit later. + */ + if (status == -ENODEV || status == -ESHUTDOWN) + status = 0; + return status; +} + +/** + * usb_enable_autosuspend - allow a USB device to be autosuspended + * @udev: the USB device which may be autosuspended + * + * This routine allows @udev to be autosuspended. An autosuspend won't + * take place until the autosuspend_delay has elapsed and all the other + * necessary conditions are satisfied. + * + * The caller must hold @udev's device lock. + */ +void usb_enable_autosuspend(struct usb_device *udev) +{ + pm_runtime_allow(&udev->dev); +} +EXPORT_SYMBOL_GPL(usb_enable_autosuspend); + +/** + * usb_disable_autosuspend - prevent a USB device from being autosuspended + * @udev: the USB device which may not be autosuspended + * + * This routine prevents @udev from being autosuspended and wakes it up + * if it is already autosuspended. + * + * The caller must hold @udev's device lock. + */ +void usb_disable_autosuspend(struct usb_device *udev) +{ + pm_runtime_forbid(&udev->dev); +} +EXPORT_SYMBOL_GPL(usb_disable_autosuspend); + +/** + * usb_autosuspend_device - delayed autosuspend of a USB device and its interfaces + * @udev: the usb_device to autosuspend + * + * This routine should be called when a core subsystem is finished using + * @udev and wants to allow it to autosuspend. Examples would be when + * @udev's device file in usbfs is closed or after a configuration change. + * + * @udev's usage counter is decremented; if it drops to 0 and all the + * interfaces are inactive then a delayed autosuspend will be attempted. + * The attempt may fail (see autosuspend_check()). + * + * The caller must hold @udev's device lock. + * + * This routine can run only in process context. + */ +void usb_autosuspend_device(struct usb_device *udev) +{ + int status; + + usb_mark_last_busy(udev); + status = pm_runtime_put_sync_autosuspend(&udev->dev); + dev_vdbg(&udev->dev, "%s: cnt %d -> %d\n", + __func__, atomic_read(&udev->dev.power.usage_count), + status); +} + +/** + * usb_autoresume_device - immediately autoresume a USB device and its interfaces + * @udev: the usb_device to autoresume + * + * This routine should be called when a core subsystem wants to use @udev + * and needs to guarantee that it is not suspended. No autosuspend will + * occur until usb_autosuspend_device() is called. (Note that this will + * not prevent suspend events originating in the PM core.) Examples would + * be when @udev's device file in usbfs is opened or when a remote-wakeup + * request is received. + * + * @udev's usage counter is incremented to prevent subsequent autosuspends. + * However if the autoresume fails then the usage counter is re-decremented. + * + * The caller must hold @udev's device lock. + * + * This routine can run only in process context. + * + * Return: 0 on success. A negative error code otherwise. + */ +int usb_autoresume_device(struct usb_device *udev) +{ + int status; + + status = pm_runtime_get_sync(&udev->dev); + if (status < 0) + pm_runtime_put_sync(&udev->dev); + dev_vdbg(&udev->dev, "%s: cnt %d -> %d\n", + __func__, atomic_read(&udev->dev.power.usage_count), + status); + if (status > 0) + status = 0; + return status; +} + +/** + * usb_autopm_put_interface - decrement a USB interface's PM-usage counter + * @intf: the usb_interface whose counter should be decremented + * + * This routine should be called by an interface driver when it is + * finished using @intf and wants to allow it to autosuspend. A typical + * example would be a character-device driver when its device file is + * closed. + * + * The routine decrements @intf's usage counter. When the counter reaches + * 0, a delayed autosuspend request for @intf's device is attempted. The + * attempt may fail (see autosuspend_check()). + * + * This routine can run only in process context. + */ +void usb_autopm_put_interface(struct usb_interface *intf) +{ + struct usb_device *udev = interface_to_usbdev(intf); + int status; + + usb_mark_last_busy(udev); + status = pm_runtime_put_sync(&intf->dev); + dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n", + __func__, atomic_read(&intf->dev.power.usage_count), + status); +} +EXPORT_SYMBOL_GPL(usb_autopm_put_interface); + +/** + * usb_autopm_put_interface_async - decrement a USB interface's PM-usage counter + * @intf: the usb_interface whose counter should be decremented + * + * This routine does much the same thing as usb_autopm_put_interface(): + * It decrements @intf's usage counter and schedules a delayed + * autosuspend request if the counter is <= 0. The difference is that it + * does not perform any synchronization; callers should hold a private + * lock and handle all synchronization issues themselves. + * + * Typically a driver would call this routine during an URB's completion + * handler, if no more URBs were pending. + * + * This routine can run in atomic context. + */ +void usb_autopm_put_interface_async(struct usb_interface *intf) +{ + struct usb_device *udev = interface_to_usbdev(intf); + int status; + + usb_mark_last_busy(udev); + status = pm_runtime_put(&intf->dev); + dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n", + __func__, atomic_read(&intf->dev.power.usage_count), + status); +} +EXPORT_SYMBOL_GPL(usb_autopm_put_interface_async); + +/** + * usb_autopm_put_interface_no_suspend - decrement a USB interface's PM-usage counter + * @intf: the usb_interface whose counter should be decremented + * + * This routine decrements @intf's usage counter but does not carry out an + * autosuspend. + * + * This routine can run in atomic context. + */ +void usb_autopm_put_interface_no_suspend(struct usb_interface *intf) +{ + struct usb_device *udev = interface_to_usbdev(intf); + + usb_mark_last_busy(udev); + pm_runtime_put_noidle(&intf->dev); +} +EXPORT_SYMBOL_GPL(usb_autopm_put_interface_no_suspend); + +/** + * usb_autopm_get_interface - increment a USB interface's PM-usage counter + * @intf: the usb_interface whose counter should be incremented + * + * This routine should be called by an interface driver when it wants to + * use @intf and needs to guarantee that it is not suspended. In addition, + * the routine prevents @intf from being autosuspended subsequently. (Note + * that this will not prevent suspend events originating in the PM core.) + * This prevention will persist until usb_autopm_put_interface() is called + * or @intf is unbound. A typical example would be a character-device + * driver when its device file is opened. + * + * @intf's usage counter is incremented to prevent subsequent autosuspends. + * However if the autoresume fails then the counter is re-decremented. + * + * This routine can run only in process context. + * + * Return: 0 on success. + */ +int usb_autopm_get_interface(struct usb_interface *intf) +{ + int status; + + status = pm_runtime_get_sync(&intf->dev); + if (status < 0) + pm_runtime_put_sync(&intf->dev); + dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n", + __func__, atomic_read(&intf->dev.power.usage_count), + status); + if (status > 0) + status = 0; + return status; +} +EXPORT_SYMBOL_GPL(usb_autopm_get_interface); + +/** + * usb_autopm_get_interface_async - increment a USB interface's PM-usage counter + * @intf: the usb_interface whose counter should be incremented + * + * This routine does much the same thing as + * usb_autopm_get_interface(): It increments @intf's usage counter and + * queues an autoresume request if the device is suspended. The + * differences are that it does not perform any synchronization (callers + * should hold a private lock and handle all synchronization issues + * themselves), and it does not autoresume the device directly (it only + * queues a request). After a successful call, the device may not yet be + * resumed. + * + * This routine can run in atomic context. + * + * Return: 0 on success. A negative error code otherwise. + */ +int usb_autopm_get_interface_async(struct usb_interface *intf) +{ + int status; + + status = pm_runtime_get(&intf->dev); + if (status < 0 && status != -EINPROGRESS) + pm_runtime_put_noidle(&intf->dev); + dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n", + __func__, atomic_read(&intf->dev.power.usage_count), + status); + if (status > 0 || status == -EINPROGRESS) + status = 0; + return status; +} +EXPORT_SYMBOL_GPL(usb_autopm_get_interface_async); + +/** + * usb_autopm_get_interface_no_resume - increment a USB interface's PM-usage counter + * @intf: the usb_interface whose counter should be incremented + * + * This routine increments @intf's usage counter but does not carry out an + * autoresume. + * + * This routine can run in atomic context. + */ +void usb_autopm_get_interface_no_resume(struct usb_interface *intf) +{ + struct usb_device *udev = interface_to_usbdev(intf); + + usb_mark_last_busy(udev); + pm_runtime_get_noresume(&intf->dev); +} +EXPORT_SYMBOL_GPL(usb_autopm_get_interface_no_resume); + +/* Internal routine to check whether we may autosuspend a device. */ +static int autosuspend_check(struct usb_device *udev) +{ + int w, i; + struct usb_interface *intf; + + if (udev->state == USB_STATE_NOTATTACHED) + return -ENODEV; + + /* Fail if autosuspend is disabled, or any interfaces are in use, or + * any interface drivers require remote wakeup but it isn't available. + */ + w = 0; + if (udev->actconfig) { + for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { + intf = udev->actconfig->interface[i]; + + /* We don't need to check interfaces that are + * disabled for runtime PM. Either they are unbound + * or else their drivers don't support autosuspend + * and so they are permanently active. + */ + if (intf->dev.power.disable_depth) + continue; + if (atomic_read(&intf->dev.power.usage_count) > 0) + return -EBUSY; + w |= intf->needs_remote_wakeup; + + /* Don't allow autosuspend if the device will need + * a reset-resume and any of its interface drivers + * doesn't include support or needs remote wakeup. + */ + if (udev->quirks & USB_QUIRK_RESET_RESUME) { + struct usb_driver *driver; + + driver = to_usb_driver(intf->dev.driver); + if (!driver->reset_resume || + intf->needs_remote_wakeup) + return -EOPNOTSUPP; + } + } + } + if (w && !device_can_wakeup(&udev->dev)) { + dev_dbg(&udev->dev, "remote wakeup needed for autosuspend\n"); + return -EOPNOTSUPP; + } + + /* + * If the device is a direct child of the root hub and the HCD + * doesn't handle wakeup requests, don't allow autosuspend when + * wakeup is needed. + */ + if (w && udev->parent == udev->bus->root_hub && + bus_to_hcd(udev->bus)->cant_recv_wakeups) { + dev_dbg(&udev->dev, "HCD doesn't handle wakeup requests\n"); + return -EOPNOTSUPP; + } + + udev->do_remote_wakeup = w; + return 0; +} + +int usb_runtime_suspend(struct device *dev) +{ + struct usb_device *udev = to_usb_device(dev); + int status; + + /* A USB device can be suspended if it passes the various autosuspend + * checks. Runtime suspend for a USB device means suspending all the + * interfaces and then the device itself. + */ + if (autosuspend_check(udev) != 0) + return -EAGAIN; + + status = usb_suspend_both(udev, PMSG_AUTO_SUSPEND); + + /* Allow a retry if autosuspend failed temporarily */ + if (status == -EAGAIN || status == -EBUSY) + usb_mark_last_busy(udev); + + /* + * The PM core reacts badly unless the return code is 0, + * -EAGAIN, or -EBUSY, so always return -EBUSY on an error + * (except for root hubs, because they don't suspend through + * an upstream port like other USB devices). + */ + if (status != 0 && udev->parent) + return -EBUSY; + return status; +} + +int usb_runtime_resume(struct device *dev) +{ + struct usb_device *udev = to_usb_device(dev); + int status; + + /* Runtime resume for a USB device means resuming both the device + * and all its interfaces. + */ + status = usb_resume_both(udev, PMSG_AUTO_RESUME); + return status; +} + +int usb_runtime_idle(struct device *dev) +{ + struct usb_device *udev = to_usb_device(dev); + + /* An idle USB device can be suspended if it passes the various + * autosuspend checks. + */ + if (autosuspend_check(udev) == 0) + pm_runtime_autosuspend(dev); + /* Tell the core not to suspend it, though. */ + return -EBUSY; +} + +static int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable) +{ + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + int ret = -EPERM; + + if (hcd->driver->set_usb2_hw_lpm) { + ret = hcd->driver->set_usb2_hw_lpm(hcd, udev, enable); + if (!ret) + udev->usb2_hw_lpm_enabled = enable; + } + + return ret; +} + +int usb_enable_usb2_hardware_lpm(struct usb_device *udev) +{ + if (!udev->usb2_hw_lpm_capable || + !udev->usb2_hw_lpm_allowed || + udev->usb2_hw_lpm_enabled) + return 0; + + return usb_set_usb2_hardware_lpm(udev, 1); +} + +int usb_disable_usb2_hardware_lpm(struct usb_device *udev) +{ + if (!udev->usb2_hw_lpm_enabled) + return 0; + + return usb_set_usb2_hardware_lpm(udev, 0); +} + +#endif /* CONFIG_PM */ + +struct bus_type usb_bus_type = { + .name = "usb", + .match = usb_device_match, + .uevent = usb_uevent, + .need_parent_lock = true, +}; diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c new file mode 100644 index 000000000..a2530811c --- /dev/null +++ b/drivers/usb/core/endpoint.c @@ -0,0 +1,191 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * drivers/usb/core/endpoint.c + * + * (C) Copyright 2002,2004,2006 Greg Kroah-Hartman + * (C) Copyright 2002,2004 IBM Corp. + * (C) Copyright 2006 Novell Inc. + * + * Released under the GPLv2 only. + * + * Endpoint sysfs stuff + */ + +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/usb.h> +#include "usb.h" + +struct ep_device { + struct usb_endpoint_descriptor *desc; + struct usb_device *udev; + struct device dev; +}; +#define to_ep_device(_dev) \ + container_of(_dev, struct ep_device, dev) + +struct ep_attribute { + struct attribute attr; + ssize_t (*show)(struct usb_device *, + struct usb_endpoint_descriptor *, char *); +}; +#define to_ep_attribute(_attr) \ + container_of(_attr, struct ep_attribute, attr) + +#define usb_ep_attr(field, format_string) \ +static ssize_t field##_show(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + struct ep_device *ep = to_ep_device(dev); \ + return sprintf(buf, format_string, ep->desc->field); \ +} \ +static DEVICE_ATTR_RO(field) + +usb_ep_attr(bLength, "%02x\n"); +usb_ep_attr(bEndpointAddress, "%02x\n"); +usb_ep_attr(bmAttributes, "%02x\n"); +usb_ep_attr(bInterval, "%02x\n"); + +static ssize_t wMaxPacketSize_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ep_device *ep = to_ep_device(dev); + return sprintf(buf, "%04x\n", usb_endpoint_maxp(ep->desc)); +} +static DEVICE_ATTR_RO(wMaxPacketSize); + +static ssize_t type_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct ep_device *ep = to_ep_device(dev); + char *type = "unknown"; + + switch (usb_endpoint_type(ep->desc)) { + case USB_ENDPOINT_XFER_CONTROL: + type = "Control"; + break; + case USB_ENDPOINT_XFER_ISOC: + type = "Isoc"; + break; + case USB_ENDPOINT_XFER_BULK: + type = "Bulk"; + break; + case USB_ENDPOINT_XFER_INT: + type = "Interrupt"; + break; + } + return sprintf(buf, "%s\n", type); +} +static DEVICE_ATTR_RO(type); + +static ssize_t interval_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct ep_device *ep = to_ep_device(dev); + unsigned int interval; + char unit; + + interval = usb_decode_interval(ep->desc, ep->udev->speed); + if (interval % 1000) { + unit = 'u'; + } else { + unit = 'm'; + interval /= 1000; + } + + return sprintf(buf, "%d%cs\n", interval, unit); +} +static DEVICE_ATTR_RO(interval); + +static ssize_t direction_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct ep_device *ep = to_ep_device(dev); + char *direction; + + if (usb_endpoint_xfer_control(ep->desc)) + direction = "both"; + else if (usb_endpoint_dir_in(ep->desc)) + direction = "in"; + else + direction = "out"; + return sprintf(buf, "%s\n", direction); +} +static DEVICE_ATTR_RO(direction); + +static struct attribute *ep_dev_attrs[] = { + &dev_attr_bLength.attr, + &dev_attr_bEndpointAddress.attr, + &dev_attr_bmAttributes.attr, + &dev_attr_bInterval.attr, + &dev_attr_wMaxPacketSize.attr, + &dev_attr_interval.attr, + &dev_attr_type.attr, + &dev_attr_direction.attr, + NULL, +}; +static const struct attribute_group ep_dev_attr_grp = { + .attrs = ep_dev_attrs, +}; +static const struct attribute_group *ep_dev_groups[] = { + &ep_dev_attr_grp, + NULL +}; + +static void ep_device_release(struct device *dev) +{ + struct ep_device *ep_dev = to_ep_device(dev); + + kfree(ep_dev); +} + +struct device_type usb_ep_device_type = { + .name = "usb_endpoint", + .release = ep_device_release, +}; + +int usb_create_ep_devs(struct device *parent, + struct usb_host_endpoint *endpoint, + struct usb_device *udev) +{ + struct ep_device *ep_dev; + int retval; + + ep_dev = kzalloc(sizeof(*ep_dev), GFP_KERNEL); + if (!ep_dev) { + retval = -ENOMEM; + goto exit; + } + + ep_dev->desc = &endpoint->desc; + ep_dev->udev = udev; + ep_dev->dev.groups = ep_dev_groups; + ep_dev->dev.type = &usb_ep_device_type; + ep_dev->dev.parent = parent; + dev_set_name(&ep_dev->dev, "ep_%02x", endpoint->desc.bEndpointAddress); + + retval = device_register(&ep_dev->dev); + if (retval) + goto error_register; + + device_enable_async_suspend(&ep_dev->dev); + endpoint->ep_dev = ep_dev; + return retval; + +error_register: + put_device(&ep_dev->dev); +exit: + return retval; +} + +void usb_remove_ep_devs(struct usb_host_endpoint *endpoint) +{ + struct ep_device *ep_dev = endpoint->ep_dev; + + if (ep_dev) { + device_unregister(&ep_dev->dev); + endpoint->ep_dev = NULL; + } +} diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c new file mode 100644 index 000000000..558890ada --- /dev/null +++ b/drivers/usb/core/file.c @@ -0,0 +1,247 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * drivers/usb/core/file.c + * + * (C) Copyright Linus Torvalds 1999 + * (C) Copyright Johannes Erdfelt 1999-2001 + * (C) Copyright Andreas Gal 1999 + * (C) Copyright Gregory P. Smith 1999 + * (C) Copyright Deti Fliegl 1999 (new USB architecture) + * (C) Copyright Randy Dunlap 2000 + * (C) Copyright David Brownell 2000-2001 (kernel hotplug, usb_device_id, + * more docs, etc) + * (C) Copyright Yggdrasil Computing, Inc. 2000 + * (usb_device_id matching changes by Adam J. Richter) + * (C) Copyright Greg Kroah-Hartman 2002-2003 + * + * Released under the GPLv2 only. + */ + +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/rwsem.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/usb.h> + +#include "usb.h" + +#define MAX_USB_MINORS 256 +static const struct file_operations *usb_minors[MAX_USB_MINORS]; +static DECLARE_RWSEM(minor_rwsem); +static DEFINE_MUTEX(init_usb_class_mutex); + +static int usb_open(struct inode *inode, struct file *file) +{ + int err = -ENODEV; + const struct file_operations *new_fops; + + down_read(&minor_rwsem); + new_fops = fops_get(usb_minors[iminor(inode)]); + + if (!new_fops) + goto done; + + replace_fops(file, new_fops); + /* Curiouser and curiouser... NULL ->open() as "no device" ? */ + if (file->f_op->open) + err = file->f_op->open(inode, file); + done: + up_read(&minor_rwsem); + return err; +} + +static const struct file_operations usb_fops = { + .owner = THIS_MODULE, + .open = usb_open, + .llseek = noop_llseek, +}; + +static struct usb_class { + struct kref kref; + struct class *class; +} *usb_class; + +static char *usb_devnode(struct device *dev, umode_t *mode) +{ + struct usb_class_driver *drv; + + drv = dev_get_drvdata(dev); + if (!drv || !drv->devnode) + return NULL; + return drv->devnode(dev, mode); +} + +static int init_usb_class(void) +{ + int result = 0; + + if (usb_class != NULL) { + kref_get(&usb_class->kref); + goto exit; + } + + usb_class = kmalloc(sizeof(*usb_class), GFP_KERNEL); + if (!usb_class) { + result = -ENOMEM; + goto exit; + } + + kref_init(&usb_class->kref); + usb_class->class = class_create(THIS_MODULE, "usbmisc"); + if (IS_ERR(usb_class->class)) { + result = PTR_ERR(usb_class->class); + printk(KERN_ERR "class_create failed for usb devices\n"); + kfree(usb_class); + usb_class = NULL; + goto exit; + } + usb_class->class->devnode = usb_devnode; + +exit: + return result; +} + +static void release_usb_class(struct kref *kref) +{ + /* Ok, we cheat as we know we only have one usb_class */ + class_destroy(usb_class->class); + kfree(usb_class); + usb_class = NULL; +} + +static void destroy_usb_class(void) +{ + mutex_lock(&init_usb_class_mutex); + kref_put(&usb_class->kref, release_usb_class); + mutex_unlock(&init_usb_class_mutex); +} + +int usb_major_init(void) +{ + int error; + + error = register_chrdev(USB_MAJOR, "usb", &usb_fops); + if (error) + printk(KERN_ERR "Unable to get major %d for usb devices\n", + USB_MAJOR); + + return error; +} + +void usb_major_cleanup(void) +{ + unregister_chrdev(USB_MAJOR, "usb"); +} + +/** + * usb_register_dev - register a USB device, and ask for a minor number + * @intf: pointer to the usb_interface that is being registered + * @class_driver: pointer to the usb_class_driver for this device + * + * This should be called by all USB drivers that use the USB major number. + * If CONFIG_USB_DYNAMIC_MINORS is enabled, the minor number will be + * dynamically allocated out of the list of available ones. If it is not + * enabled, the minor number will be based on the next available free minor, + * starting at the class_driver->minor_base. + * + * This function also creates a usb class device in the sysfs tree. + * + * usb_deregister_dev() must be called when the driver is done with + * the minor numbers given out by this function. + * + * Return: -EINVAL if something bad happens with trying to register a + * device, and 0 on success. + */ +int usb_register_dev(struct usb_interface *intf, + struct usb_class_driver *class_driver) +{ + int retval; + int minor_base = class_driver->minor_base; + int minor; + char name[20]; + +#ifdef CONFIG_USB_DYNAMIC_MINORS + /* + * We don't care what the device tries to start at, we want to start + * at zero to pack the devices into the smallest available space with + * no holes in the minor range. + */ + minor_base = 0; +#endif + + if (class_driver->fops == NULL) + return -EINVAL; + if (intf->minor >= 0) + return -EADDRINUSE; + + mutex_lock(&init_usb_class_mutex); + retval = init_usb_class(); + mutex_unlock(&init_usb_class_mutex); + + if (retval) + return retval; + + dev_dbg(&intf->dev, "looking for a minor, starting at %d\n", minor_base); + + down_write(&minor_rwsem); + for (minor = minor_base; minor < MAX_USB_MINORS; ++minor) { + if (usb_minors[minor]) + continue; + + usb_minors[minor] = class_driver->fops; + intf->minor = minor; + break; + } + if (intf->minor < 0) { + up_write(&minor_rwsem); + return -EXFULL; + } + + /* create a usb class device for this usb interface */ + snprintf(name, sizeof(name), class_driver->name, minor - minor_base); + intf->usb_dev = device_create(usb_class->class, &intf->dev, + MKDEV(USB_MAJOR, minor), class_driver, + "%s", kbasename(name)); + if (IS_ERR(intf->usb_dev)) { + usb_minors[minor] = NULL; + intf->minor = -1; + retval = PTR_ERR(intf->usb_dev); + } + up_write(&minor_rwsem); + return retval; +} +EXPORT_SYMBOL_GPL(usb_register_dev); + +/** + * usb_deregister_dev - deregister a USB device's dynamic minor. + * @intf: pointer to the usb_interface that is being deregistered + * @class_driver: pointer to the usb_class_driver for this device + * + * Used in conjunction with usb_register_dev(). This function is called + * when the USB driver is finished with the minor numbers gotten from a + * call to usb_register_dev() (usually when the device is disconnected + * from the system.) + * + * This function also removes the usb class device from the sysfs tree. + * + * This should be called by all drivers that use the USB major number. + */ +void usb_deregister_dev(struct usb_interface *intf, + struct usb_class_driver *class_driver) +{ + if (intf->minor == -1) + return; + + dev_dbg(&intf->dev, "removing %d minor\n", intf->minor); + device_destroy(usb_class->class, MKDEV(USB_MAJOR, intf->minor)); + + down_write(&minor_rwsem); + usb_minors[intf->minor] = NULL; + up_write(&minor_rwsem); + + intf->usb_dev = NULL; + intf->minor = -1; + destroy_usb_class(); +} +EXPORT_SYMBOL_GPL(usb_deregister_dev); diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c new file mode 100644 index 000000000..740342a28 --- /dev/null +++ b/drivers/usb/core/generic.c @@ -0,0 +1,324 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * drivers/usb/core/generic.c - generic driver for USB devices (not interfaces) + * + * (C) Copyright 2005 Greg Kroah-Hartman <gregkh@suse.de> + * + * based on drivers/usb/usb.c which had the following copyrights: + * (C) Copyright Linus Torvalds 1999 + * (C) Copyright Johannes Erdfelt 1999-2001 + * (C) Copyright Andreas Gal 1999 + * (C) Copyright Gregory P. Smith 1999 + * (C) Copyright Deti Fliegl 1999 (new USB architecture) + * (C) Copyright Randy Dunlap 2000 + * (C) Copyright David Brownell 2000-2004 + * (C) Copyright Yggdrasil Computing, Inc. 2000 + * (usb_device_id matching changes by Adam J. Richter) + * (C) Copyright Greg Kroah-Hartman 2002-2003 + * + * Released under the GPLv2 only. + */ + +#include <linux/usb.h> +#include <linux/usb/hcd.h> +#include <uapi/linux/usb/audio.h> +#include "usb.h" + +static inline const char *plural(int n) +{ + return (n == 1 ? "" : "s"); +} + +static int is_rndis(struct usb_interface_descriptor *desc) +{ + return desc->bInterfaceClass == USB_CLASS_COMM + && desc->bInterfaceSubClass == 2 + && desc->bInterfaceProtocol == 0xff; +} + +static int is_activesync(struct usb_interface_descriptor *desc) +{ + return desc->bInterfaceClass == USB_CLASS_MISC + && desc->bInterfaceSubClass == 1 + && desc->bInterfaceProtocol == 1; +} + +static bool is_audio(struct usb_interface_descriptor *desc) +{ + return desc->bInterfaceClass == USB_CLASS_AUDIO; +} + +static bool is_uac3_config(struct usb_interface_descriptor *desc) +{ + return desc->bInterfaceProtocol == UAC_VERSION_3; +} + +int usb_choose_configuration(struct usb_device *udev) +{ + int i; + int num_configs; + int insufficient_power = 0; + struct usb_host_config *c, *best; + + if (usb_device_is_owned(udev)) + return 0; + + best = NULL; + c = udev->config; + num_configs = udev->descriptor.bNumConfigurations; + for (i = 0; i < num_configs; (i++, c++)) { + struct usb_interface_descriptor *desc = NULL; + + /* It's possible that a config has no interfaces! */ + if (c->desc.bNumInterfaces > 0) + desc = &c->intf_cache[0]->altsetting->desc; + + /* + * HP's USB bus-powered keyboard has only one configuration + * and it claims to be self-powered; other devices may have + * similar errors in their descriptors. If the next test + * were allowed to execute, such configurations would always + * be rejected and the devices would not work as expected. + * In the meantime, we run the risk of selecting a config + * that requires external power at a time when that power + * isn't available. It seems to be the lesser of two evils. + * + * Bugzilla #6448 reports a device that appears to crash + * when it receives a GET_DEVICE_STATUS request! We don't + * have any other way to tell whether a device is self-powered, + * but since we don't use that information anywhere but here, + * the call has been removed. + * + * Maybe the GET_DEVICE_STATUS call and the test below can + * be reinstated when device firmwares become more reliable. + * Don't hold your breath. + */ +#if 0 + /* Rule out self-powered configs for a bus-powered device */ + if (bus_powered && (c->desc.bmAttributes & + USB_CONFIG_ATT_SELFPOWER)) + continue; +#endif + + /* + * The next test may not be as effective as it should be. + * Some hubs have errors in their descriptor, claiming + * to be self-powered when they are really bus-powered. + * We will overestimate the amount of current such hubs + * make available for each port. + * + * This is a fairly benign sort of failure. It won't + * cause us to reject configurations that we should have + * accepted. + */ + + /* Rule out configs that draw too much bus current */ + if (usb_get_max_power(udev, c) > udev->bus_mA) { + insufficient_power++; + continue; + } + + /* + * Select first configuration as default for audio so that + * devices that don't comply with UAC3 protocol are supported. + * But, still iterate through other configurations and + * select UAC3 compliant config if present. + */ + if (desc && is_audio(desc)) { + /* Always prefer the first found UAC3 config */ + if (is_uac3_config(desc)) { + best = c; + break; + } + + /* If there is no UAC3 config, prefer the first config */ + else if (i == 0) + best = c; + + /* Unconditional continue, because the rest of the code + * in the loop is irrelevant for audio devices, and + * because it can reassign best, which for audio devices + * we don't want. + */ + continue; + } + + /* When the first config's first interface is one of Microsoft's + * pet nonstandard Ethernet-over-USB protocols, ignore it unless + * this kernel has enabled the necessary host side driver. + * But: Don't ignore it if it's the only config. + */ + if (i == 0 && num_configs > 1 && desc && + (is_rndis(desc) || is_activesync(desc))) { +#if !defined(CONFIG_USB_NET_RNDIS_HOST) && !defined(CONFIG_USB_NET_RNDIS_HOST_MODULE) + continue; +#else + best = c; +#endif + } + + /* From the remaining configs, choose the first one whose + * first interface is for a non-vendor-specific class. + * Reason: Linux is more likely to have a class driver + * than a vendor-specific driver. */ + else if (udev->descriptor.bDeviceClass != + USB_CLASS_VENDOR_SPEC && + (desc && desc->bInterfaceClass != + USB_CLASS_VENDOR_SPEC)) { + best = c; + break; + } + + /* If all the remaining configs are vendor-specific, + * choose the first one. */ + else if (!best) + best = c; + } + + if (insufficient_power > 0) + dev_info(&udev->dev, "rejected %d configuration%s " + "due to insufficient available bus power\n", + insufficient_power, plural(insufficient_power)); + + if (best) { + i = best->desc.bConfigurationValue; + dev_dbg(&udev->dev, + "configuration #%d chosen from %d choice%s\n", + i, num_configs, plural(num_configs)); + } else { + i = -1; + dev_warn(&udev->dev, + "no configuration chosen from %d choice%s\n", + num_configs, plural(num_configs)); + } + return i; +} +EXPORT_SYMBOL_GPL(usb_choose_configuration); + +static int __check_for_non_generic_match(struct device_driver *drv, void *data) +{ + struct usb_device *udev = data; + struct usb_device_driver *udrv; + + if (!is_usb_device_driver(drv)) + return 0; + udrv = to_usb_device_driver(drv); + if (udrv == &usb_generic_driver) + return 0; + return usb_driver_applicable(udev, udrv); +} + +static bool usb_generic_driver_match(struct usb_device *udev) +{ + if (udev->use_generic_driver) + return true; + + /* + * If any other driver wants the device, leave the device to this other + * driver. + */ + if (bus_for_each_drv(&usb_bus_type, NULL, udev, __check_for_non_generic_match)) + return false; + + return true; +} + +int usb_generic_driver_probe(struct usb_device *udev) +{ + int err, c; + + /* Choose and set the configuration. This registers the interfaces + * with the driver core and lets interface drivers bind to them. + */ + if (udev->authorized == 0) + dev_err(&udev->dev, "Device is not authorized for usage\n"); + else { + c = usb_choose_configuration(udev); + if (c >= 0) { + err = usb_set_configuration(udev, c); + if (err && err != -ENODEV) { + dev_err(&udev->dev, "can't set config #%d, error %d\n", + c, err); + /* This need not be fatal. The user can try to + * set other configurations. */ + } + } + } + /* USB device state == configured ... usable */ + usb_notify_add_device(udev); + + return 0; +} + +void usb_generic_driver_disconnect(struct usb_device *udev) +{ + usb_notify_remove_device(udev); + + /* if this is only an unbind, not a physical disconnect, then + * unconfigure the device */ + if (udev->actconfig) + usb_set_configuration(udev, -1); +} + +#ifdef CONFIG_PM + +int usb_generic_driver_suspend(struct usb_device *udev, pm_message_t msg) +{ + int rc; + + /* Normal USB devices suspend through their upstream port. + * Root hubs don't have upstream ports to suspend, + * so we have to shut down their downstream HC-to-USB + * interfaces manually by doing a bus (or "global") suspend. + */ + if (!udev->parent) + rc = hcd_bus_suspend(udev, msg); + + /* + * Non-root USB2 devices don't need to do anything for FREEZE + * or PRETHAW. USB3 devices don't support global suspend and + * needs to be selectively suspended. + */ + else if ((msg.event == PM_EVENT_FREEZE || msg.event == PM_EVENT_PRETHAW) + && (udev->speed < USB_SPEED_SUPER)) + rc = 0; + else + rc = usb_port_suspend(udev, msg); + + if (rc == 0) + usbfs_notify_suspend(udev); + return rc; +} + +int usb_generic_driver_resume(struct usb_device *udev, pm_message_t msg) +{ + int rc; + + /* Normal USB devices resume/reset through their upstream port. + * Root hubs don't have upstream ports to resume or reset, + * so we have to start up their downstream HC-to-USB + * interfaces manually by doing a bus (or "global") resume. + */ + if (!udev->parent) + rc = hcd_bus_resume(udev, msg); + else + rc = usb_port_resume(udev, msg); + + if (rc == 0) + usbfs_notify_resume(udev); + return rc; +} + +#endif /* CONFIG_PM */ + +struct usb_device_driver usb_generic_driver = { + .name = "usb", + .match = usb_generic_driver_match, + .probe = usb_generic_driver_probe, + .disconnect = usb_generic_driver_disconnect, +#ifdef CONFIG_PM + .suspend = usb_generic_driver_suspend, + .resume = usb_generic_driver_resume, +#endif + .supports_autosuspend = 1, +}; diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c new file mode 100644 index 000000000..9b77f49b3 --- /dev/null +++ b/drivers/usb/core/hcd-pci.c @@ -0,0 +1,626 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright David Brownell 2000-2002 + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> + +#include <asm/io.h> +#include <asm/irq.h> + +#ifdef CONFIG_PPC_PMAC +#include <asm/machdep.h> +#include <asm/pmac_feature.h> +#endif + +#include "usb.h" + + +/* PCI-based HCs are common, but plenty of non-PCI HCs are used too */ + +/* + * Coordinate handoffs between EHCI and companion controllers + * during EHCI probing and system resume. + */ + +static DECLARE_RWSEM(companions_rwsem); + +#define CL_UHCI PCI_CLASS_SERIAL_USB_UHCI +#define CL_OHCI PCI_CLASS_SERIAL_USB_OHCI +#define CL_EHCI PCI_CLASS_SERIAL_USB_EHCI + +static inline int is_ohci_or_uhci(struct pci_dev *pdev) +{ + return pdev->class == CL_OHCI || pdev->class == CL_UHCI; +} + +typedef void (*companion_fn)(struct pci_dev *pdev, struct usb_hcd *hcd, + struct pci_dev *companion, struct usb_hcd *companion_hcd); + +/* Iterate over PCI devices in the same slot as pdev and call fn for each */ +static void for_each_companion(struct pci_dev *pdev, struct usb_hcd *hcd, + companion_fn fn) +{ + struct pci_dev *companion; + struct usb_hcd *companion_hcd; + unsigned int slot = PCI_SLOT(pdev->devfn); + + /* + * Iterate through other PCI functions in the same slot. + * If the function's drvdata isn't set then it isn't bound to + * a USB host controller driver, so skip it. + */ + companion = NULL; + for_each_pci_dev(companion) { + if (companion->bus != pdev->bus || + PCI_SLOT(companion->devfn) != slot) + continue; + + /* + * Companion device should be either UHCI,OHCI or EHCI host + * controller, otherwise skip. + */ + if (companion->class != CL_UHCI && companion->class != CL_OHCI && + companion->class != CL_EHCI) + continue; + + companion_hcd = pci_get_drvdata(companion); + if (!companion_hcd || !companion_hcd->self.root_hub) + continue; + fn(pdev, hcd, companion, companion_hcd); + } +} + +/* + * We're about to add an EHCI controller, which will unceremoniously grab + * all the port connections away from its companions. To prevent annoying + * error messages, lock the companion's root hub and gracefully unconfigure + * it beforehand. Leave it locked until the EHCI controller is all set. + */ +static void ehci_pre_add(struct pci_dev *pdev, struct usb_hcd *hcd, + struct pci_dev *companion, struct usb_hcd *companion_hcd) +{ + struct usb_device *udev; + + if (is_ohci_or_uhci(companion)) { + udev = companion_hcd->self.root_hub; + usb_lock_device(udev); + usb_set_configuration(udev, 0); + } +} + +/* + * Adding the EHCI controller has either succeeded or failed. Set the + * companion pointer accordingly, and in either case, reconfigure and + * unlock the root hub. + */ +static void ehci_post_add(struct pci_dev *pdev, struct usb_hcd *hcd, + struct pci_dev *companion, struct usb_hcd *companion_hcd) +{ + struct usb_device *udev; + + if (is_ohci_or_uhci(companion)) { + if (dev_get_drvdata(&pdev->dev)) { /* Succeeded */ + dev_dbg(&pdev->dev, "HS companion for %s\n", + dev_name(&companion->dev)); + companion_hcd->self.hs_companion = &hcd->self; + } + udev = companion_hcd->self.root_hub; + usb_set_configuration(udev, 1); + usb_unlock_device(udev); + } +} + +/* + * We just added a non-EHCI controller. Find the EHCI controller to + * which it is a companion, and store a pointer to the bus structure. + */ +static void non_ehci_add(struct pci_dev *pdev, struct usb_hcd *hcd, + struct pci_dev *companion, struct usb_hcd *companion_hcd) +{ + if (is_ohci_or_uhci(pdev) && companion->class == CL_EHCI) { + dev_dbg(&pdev->dev, "FS/LS companion for %s\n", + dev_name(&companion->dev)); + hcd->self.hs_companion = &companion_hcd->self; + } +} + +/* We are removing an EHCI controller. Clear the companions' pointers. */ +static void ehci_remove(struct pci_dev *pdev, struct usb_hcd *hcd, + struct pci_dev *companion, struct usb_hcd *companion_hcd) +{ + if (is_ohci_or_uhci(companion)) + companion_hcd->self.hs_companion = NULL; +} + +#ifdef CONFIG_PM + +/* An EHCI controller must wait for its companions before resuming. */ +static void ehci_wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd, + struct pci_dev *companion, struct usb_hcd *companion_hcd) +{ + if (is_ohci_or_uhci(companion)) + device_pm_wait_for_dev(&pdev->dev, &companion->dev); +} + +#endif /* CONFIG_PM */ + +/*-------------------------------------------------------------------------*/ + +/* configure so an HC device and id are always provided */ +/* always called with process context; sleeping is OK */ + +/** + * usb_hcd_pci_probe - initialize PCI-based HCDs + * @dev: USB Host Controller being probed + * @driver: USB HC driver handle + * + * Context: task context, might sleep + * + * Allocates basic PCI resources for this USB host controller, and + * then invokes the start() method for the HCD associated with it + * through the hotplug entry's driver_data. + * + * Store this function in the HCD's struct pci_driver as probe(). + * + * Return: 0 if successful. + */ +int usb_hcd_pci_probe(struct pci_dev *dev, const struct hc_driver *driver) +{ + struct usb_hcd *hcd; + int retval; + int hcd_irq = 0; + + if (usb_disabled()) + return -ENODEV; + + if (!driver) + return -EINVAL; + + if (pci_enable_device(dev) < 0) + return -ENODEV; + + /* + * The xHCI driver has its own irq management + * make sure irq setup is not touched for xhci in generic hcd code + */ + if ((driver->flags & HCD_MASK) < HCD_USB3) { + retval = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY | PCI_IRQ_MSI); + if (retval < 0) { + dev_err(&dev->dev, + "Found HC with no IRQ. Check BIOS/PCI %s setup!\n", + pci_name(dev)); + retval = -ENODEV; + goto disable_pci; + } + hcd_irq = pci_irq_vector(dev, 0); + } + + hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev)); + if (!hcd) { + retval = -ENOMEM; + goto free_irq_vectors; + } + + hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) && + driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0; + + if (driver->flags & HCD_MEMORY) { + /* EHCI, OHCI */ + hcd->rsrc_start = pci_resource_start(dev, 0); + hcd->rsrc_len = pci_resource_len(dev, 0); + if (!devm_request_mem_region(&dev->dev, hcd->rsrc_start, + hcd->rsrc_len, driver->description)) { + dev_dbg(&dev->dev, "controller already in use\n"); + retval = -EBUSY; + goto put_hcd; + } + hcd->regs = devm_ioremap(&dev->dev, hcd->rsrc_start, + hcd->rsrc_len); + if (hcd->regs == NULL) { + dev_dbg(&dev->dev, "error mapping memory\n"); + retval = -EFAULT; + goto put_hcd; + } + + } else { + /* UHCI */ + int region; + + for (region = 0; region < PCI_STD_NUM_BARS; region++) { + if (!(pci_resource_flags(dev, region) & + IORESOURCE_IO)) + continue; + + hcd->rsrc_start = pci_resource_start(dev, region); + hcd->rsrc_len = pci_resource_len(dev, region); + if (devm_request_region(&dev->dev, hcd->rsrc_start, + hcd->rsrc_len, driver->description)) + break; + } + if (region == PCI_STD_NUM_BARS) { + dev_dbg(&dev->dev, "no i/o regions available\n"); + retval = -EBUSY; + goto put_hcd; + } + } + + pci_set_master(dev); + + /* Note: dev_set_drvdata must be called while holding the rwsem */ + if (dev->class == CL_EHCI) { + down_write(&companions_rwsem); + dev_set_drvdata(&dev->dev, hcd); + for_each_companion(dev, hcd, ehci_pre_add); + retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED); + if (retval != 0) + dev_set_drvdata(&dev->dev, NULL); + for_each_companion(dev, hcd, ehci_post_add); + up_write(&companions_rwsem); + } else { + down_read(&companions_rwsem); + dev_set_drvdata(&dev->dev, hcd); + retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED); + if (retval != 0) + dev_set_drvdata(&dev->dev, NULL); + else + for_each_companion(dev, hcd, non_ehci_add); + up_read(&companions_rwsem); + } + + if (retval != 0) + goto put_hcd; + device_wakeup_enable(hcd->self.controller); + + if (pci_dev_run_wake(dev)) + pm_runtime_put_noidle(&dev->dev); + return retval; + +put_hcd: + usb_put_hcd(hcd); +free_irq_vectors: + if ((driver->flags & HCD_MASK) < HCD_USB3) + pci_free_irq_vectors(dev); +disable_pci: + pci_disable_device(dev); + dev_err(&dev->dev, "init %s fail, %d\n", pci_name(dev), retval); + return retval; +} +EXPORT_SYMBOL_GPL(usb_hcd_pci_probe); + + +/* may be called without controller electrically present */ +/* may be called with controller, bus, and devices active */ + +/** + * usb_hcd_pci_remove - shutdown processing for PCI-based HCDs + * @dev: USB Host Controller being removed + * + * Context: task context, might sleep + * + * Reverses the effect of usb_hcd_pci_probe(), first invoking + * the HCD's stop() method. It is always called from a thread + * context, normally "rmmod", "apmd", or something similar. + * + * Store this function in the HCD's struct pci_driver as remove(). + */ +void usb_hcd_pci_remove(struct pci_dev *dev) +{ + struct usb_hcd *hcd; + int hcd_driver_flags; + + hcd = pci_get_drvdata(dev); + if (!hcd) + return; + + hcd_driver_flags = hcd->driver->flags; + + if (pci_dev_run_wake(dev)) + pm_runtime_get_noresume(&dev->dev); + + /* Fake an interrupt request in order to give the driver a chance + * to test whether the controller hardware has been removed (e.g., + * cardbus physical eject). + */ + local_irq_disable(); + usb_hcd_irq(0, hcd); + local_irq_enable(); + + /* Note: dev_set_drvdata must be called while holding the rwsem */ + if (dev->class == CL_EHCI) { + down_write(&companions_rwsem); + for_each_companion(dev, hcd, ehci_remove); + usb_remove_hcd(hcd); + dev_set_drvdata(&dev->dev, NULL); + up_write(&companions_rwsem); + } else { + /* Not EHCI; just clear the companion pointer */ + down_read(&companions_rwsem); + hcd->self.hs_companion = NULL; + usb_remove_hcd(hcd); + dev_set_drvdata(&dev->dev, NULL); + up_read(&companions_rwsem); + } + usb_put_hcd(hcd); + if ((hcd_driver_flags & HCD_MASK) < HCD_USB3) + pci_free_irq_vectors(dev); + pci_disable_device(dev); +} +EXPORT_SYMBOL_GPL(usb_hcd_pci_remove); + +/** + * usb_hcd_pci_shutdown - shutdown host controller + * @dev: USB Host Controller being shutdown + */ +void usb_hcd_pci_shutdown(struct pci_dev *dev) +{ + struct usb_hcd *hcd; + + hcd = pci_get_drvdata(dev); + if (!hcd) + return; + + if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) && + hcd->driver->shutdown) { + hcd->driver->shutdown(hcd); + if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0) + free_irq(hcd->irq, hcd); + pci_disable_device(dev); + } +} +EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown); + +#ifdef CONFIG_PM + +#ifdef CONFIG_PPC_PMAC +static void powermac_set_asic(struct pci_dev *pci_dev, int enable) +{ + /* Enanble or disable ASIC clocks for USB */ + if (machine_is(powermac)) { + struct device_node *of_node; + + of_node = pci_device_to_OF_node(pci_dev); + if (of_node) + pmac_call_feature(PMAC_FTR_USB_ENABLE, + of_node, 0, enable); + } +} + +#else + +static inline void powermac_set_asic(struct pci_dev *pci_dev, int enable) +{} + +#endif /* CONFIG_PPC_PMAC */ + +static int check_root_hub_suspended(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + + if (HCD_RH_RUNNING(hcd)) { + dev_warn(dev, "Root hub is not suspended\n"); + return -EBUSY; + } + if (hcd->shared_hcd) { + hcd = hcd->shared_hcd; + if (HCD_RH_RUNNING(hcd)) { + dev_warn(dev, "Secondary root hub is not suspended\n"); + return -EBUSY; + } + } + return 0; +} + +static int suspend_common(struct device *dev, bool do_wakeup) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + struct usb_hcd *hcd = pci_get_drvdata(pci_dev); + int retval; + + /* Root hub suspend should have stopped all downstream traffic, + * and all bus master traffic. And done so for both the interface + * and the stub usb_device (which we check here). But maybe it + * didn't; writing sysfs power/state files ignores such rules... + */ + retval = check_root_hub_suspended(dev); + if (retval) + return retval; + + if (hcd->driver->pci_suspend && !HCD_DEAD(hcd)) { + /* Optimization: Don't suspend if a root-hub wakeup is + * pending and it would cause the HCD to wake up anyway. + */ + if (do_wakeup && HCD_WAKEUP_PENDING(hcd)) + return -EBUSY; + if (do_wakeup && hcd->shared_hcd && + HCD_WAKEUP_PENDING(hcd->shared_hcd)) + return -EBUSY; + retval = hcd->driver->pci_suspend(hcd, do_wakeup); + suspend_report_result(dev, hcd->driver->pci_suspend, retval); + + /* Check again in case wakeup raced with pci_suspend */ + if ((retval == 0 && do_wakeup && HCD_WAKEUP_PENDING(hcd)) || + (retval == 0 && do_wakeup && hcd->shared_hcd && + HCD_WAKEUP_PENDING(hcd->shared_hcd))) { + if (hcd->driver->pci_resume) + hcd->driver->pci_resume(hcd, false); + retval = -EBUSY; + } + if (retval) + return retval; + } + + /* If MSI-X is enabled, the driver will have synchronized all vectors + * in pci_suspend(). If MSI or legacy PCI is enabled, that will be + * synchronized here. + */ + if (!hcd->msix_enabled) + synchronize_irq(pci_irq_vector(pci_dev, 0)); + + /* Downstream ports from this root hub should already be quiesced, so + * there will be no DMA activity. Now we can shut down the upstream + * link (except maybe for PME# resume signaling). We'll enter a + * low power state during suspend_noirq, if the hardware allows. + */ + pci_disable_device(pci_dev); + return retval; +} + +static int resume_common(struct device *dev, int event) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + struct usb_hcd *hcd = pci_get_drvdata(pci_dev); + int retval; + + if (HCD_RH_RUNNING(hcd) || + (hcd->shared_hcd && + HCD_RH_RUNNING(hcd->shared_hcd))) { + dev_dbg(dev, "can't resume, not suspended!\n"); + return 0; + } + + retval = pci_enable_device(pci_dev); + if (retval < 0) { + dev_err(dev, "can't re-enable after resume, %d!\n", retval); + return retval; + } + + pci_set_master(pci_dev); + + if (hcd->driver->pci_resume && !HCD_DEAD(hcd)) { + + /* + * Only EHCI controllers have to wait for their companions. + * No locking is needed because PCI controller drivers do not + * get unbound during system resume. + */ + if (pci_dev->class == CL_EHCI && event != PM_EVENT_AUTO_RESUME) + for_each_companion(pci_dev, hcd, + ehci_wait_for_companions); + + retval = hcd->driver->pci_resume(hcd, + event == PM_EVENT_RESTORE); + if (retval) { + dev_err(dev, "PCI post-resume error %d!\n", retval); + usb_hc_died(hcd); + } + } + return retval; +} + +#ifdef CONFIG_PM_SLEEP + +static int hcd_pci_suspend(struct device *dev) +{ + return suspend_common(dev, device_may_wakeup(dev)); +} + +static int hcd_pci_suspend_noirq(struct device *dev) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + struct usb_hcd *hcd = pci_get_drvdata(pci_dev); + int retval; + + retval = check_root_hub_suspended(dev); + if (retval) + return retval; + + pci_save_state(pci_dev); + + /* If the root hub is dead rather than suspended, disallow remote + * wakeup. usb_hc_died() should ensure that both hosts are marked as + * dying, so we only need to check the primary roothub. + */ + if (HCD_DEAD(hcd)) + device_set_wakeup_enable(dev, 0); + dev_dbg(dev, "wakeup: %d\n", device_may_wakeup(dev)); + + /* Possibly enable remote wakeup, + * choose the appropriate low-power state, and go to that state. + */ + retval = pci_prepare_to_sleep(pci_dev); + if (retval == -EIO) { /* Low-power not supported */ + dev_dbg(dev, "--> PCI D0 legacy\n"); + retval = 0; + } else if (retval == 0) { + dev_dbg(dev, "--> PCI %s\n", + pci_power_name(pci_dev->current_state)); + } else { + suspend_report_result(dev, pci_prepare_to_sleep, retval); + return retval; + } + + powermac_set_asic(pci_dev, 0); + return retval; +} + +static int hcd_pci_resume_noirq(struct device *dev) +{ + powermac_set_asic(to_pci_dev(dev), 1); + return 0; +} + +static int hcd_pci_resume(struct device *dev) +{ + return resume_common(dev, PM_EVENT_RESUME); +} + +static int hcd_pci_restore(struct device *dev) +{ + return resume_common(dev, PM_EVENT_RESTORE); +} + +#else + +#define hcd_pci_suspend NULL +#define hcd_pci_suspend_noirq NULL +#define hcd_pci_resume_noirq NULL +#define hcd_pci_resume NULL +#define hcd_pci_restore NULL + +#endif /* CONFIG_PM_SLEEP */ + +static int hcd_pci_runtime_suspend(struct device *dev) +{ + int retval; + + retval = suspend_common(dev, true); + if (retval == 0) + powermac_set_asic(to_pci_dev(dev), 0); + dev_dbg(dev, "hcd_pci_runtime_suspend: %d\n", retval); + return retval; +} + +static int hcd_pci_runtime_resume(struct device *dev) +{ + int retval; + + powermac_set_asic(to_pci_dev(dev), 1); + retval = resume_common(dev, PM_EVENT_AUTO_RESUME); + dev_dbg(dev, "hcd_pci_runtime_resume: %d\n", retval); + return retval; +} + +const struct dev_pm_ops usb_hcd_pci_pm_ops = { + .suspend = hcd_pci_suspend, + .suspend_noirq = hcd_pci_suspend_noirq, + .resume_noirq = hcd_pci_resume_noirq, + .resume = hcd_pci_resume, + .freeze = hcd_pci_suspend, + .freeze_noirq = check_root_hub_suspended, + .thaw_noirq = NULL, + .thaw = hcd_pci_resume, + .poweroff = hcd_pci_suspend, + .poweroff_noirq = hcd_pci_suspend_noirq, + .restore_noirq = hcd_pci_resume_noirq, + .restore = hcd_pci_restore, + .runtime_suspend = hcd_pci_runtime_suspend, + .runtime_resume = hcd_pci_runtime_resume, +}; +EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops); + +#endif /* CONFIG_PM */ diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c new file mode 100644 index 000000000..6af0a31ff --- /dev/null +++ b/drivers/usb/core/hcd.c @@ -0,0 +1,3202 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright Linus Torvalds 1999 + * (C) Copyright Johannes Erdfelt 1999-2001 + * (C) Copyright Andreas Gal 1999 + * (C) Copyright Gregory P. Smith 1999 + * (C) Copyright Deti Fliegl 1999 + * (C) Copyright Randy Dunlap 2000 + * (C) Copyright David Brownell 2000-2002 + */ + +#include <linux/bcd.h> +#include <linux/module.h> +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/sched/task_stack.h> +#include <linux/slab.h> +#include <linux/completion.h> +#include <linux/utsname.h> +#include <linux/mm.h> +#include <asm/io.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/mutex.h> +#include <asm/irq.h> +#include <asm/byteorder.h> +#include <asm/unaligned.h> +#include <linux/platform_device.h> +#include <linux/workqueue.h> +#include <linux/pm_runtime.h> +#include <linux/types.h> +#include <linux/genalloc.h> +#include <linux/io.h> +#include <linux/kcov.h> + +#include <linux/phy/phy.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> +#include <linux/usb/otg.h> + +#include "usb.h" +#include "phy.h" + + +/*-------------------------------------------------------------------------*/ + +/* + * USB Host Controller Driver framework + * + * Plugs into usbcore (usb_bus) and lets HCDs share code, minimizing + * HCD-specific behaviors/bugs. + * + * This does error checks, tracks devices and urbs, and delegates to a + * "hc_driver" only for code (and data) that really needs to know about + * hardware differences. That includes root hub registers, i/o queues, + * and so on ... but as little else as possible. + * + * Shared code includes most of the "root hub" code (these are emulated, + * though each HC's hardware works differently) and PCI glue, plus request + * tracking overhead. The HCD code should only block on spinlocks or on + * hardware handshaking; blocking on software events (such as other kernel + * threads releasing resources, or completing actions) is all generic. + * + * Happens the USB 2.0 spec says this would be invisible inside the "USBD", + * and includes mostly a "HCDI" (HCD Interface) along with some APIs used + * only by the hub driver ... and that neither should be seen or used by + * usb client device drivers. + * + * Contributors of ideas or unattributed patches include: David Brownell, + * Roman Weissgaerber, Rory Bolt, Greg Kroah-Hartman, ... + * + * HISTORY: + * 2002-02-21 Pull in most of the usb_bus support from usb.c; some + * associated cleanup. "usb_hcd" still != "usb_bus". + * 2001-12-12 Initial patch version for Linux 2.5.1 kernel. + */ + +/*-------------------------------------------------------------------------*/ + +/* Keep track of which host controller drivers are loaded */ +unsigned long usb_hcds_loaded; +EXPORT_SYMBOL_GPL(usb_hcds_loaded); + +/* host controllers we manage */ +DEFINE_IDR (usb_bus_idr); +EXPORT_SYMBOL_GPL (usb_bus_idr); + +/* used when allocating bus numbers */ +#define USB_MAXBUS 64 + +/* used when updating list of hcds */ +DEFINE_MUTEX(usb_bus_idr_lock); /* exported only for usbfs */ +EXPORT_SYMBOL_GPL (usb_bus_idr_lock); + +/* used for controlling access to virtual root hubs */ +static DEFINE_SPINLOCK(hcd_root_hub_lock); + +/* used when updating an endpoint's URB list */ +static DEFINE_SPINLOCK(hcd_urb_list_lock); + +/* used to protect against unlinking URBs after the device is gone */ +static DEFINE_SPINLOCK(hcd_urb_unlink_lock); + +/* wait queue for synchronous unlinks */ +DECLARE_WAIT_QUEUE_HEAD(usb_kill_urb_queue); + +/*-------------------------------------------------------------------------*/ + +/* + * Sharable chunks of root hub code. + */ + +/*-------------------------------------------------------------------------*/ +#define KERNEL_REL bin2bcd(LINUX_VERSION_MAJOR) +#define KERNEL_VER bin2bcd(LINUX_VERSION_PATCHLEVEL) + +/* usb 3.1 root hub device descriptor */ +static const u8 usb31_rh_dev_descriptor[18] = { + 0x12, /* __u8 bLength; */ + USB_DT_DEVICE, /* __u8 bDescriptorType; Device */ + 0x10, 0x03, /* __le16 bcdUSB; v3.1 */ + + 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ + 0x00, /* __u8 bDeviceSubClass; */ + 0x03, /* __u8 bDeviceProtocol; USB 3 hub */ + 0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */ + + 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */ + 0x03, 0x00, /* __le16 idProduct; device 0x0003 */ + KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */ + + 0x03, /* __u8 iManufacturer; */ + 0x02, /* __u8 iProduct; */ + 0x01, /* __u8 iSerialNumber; */ + 0x01 /* __u8 bNumConfigurations; */ +}; + +/* usb 3.0 root hub device descriptor */ +static const u8 usb3_rh_dev_descriptor[18] = { + 0x12, /* __u8 bLength; */ + USB_DT_DEVICE, /* __u8 bDescriptorType; Device */ + 0x00, 0x03, /* __le16 bcdUSB; v3.0 */ + + 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ + 0x00, /* __u8 bDeviceSubClass; */ + 0x03, /* __u8 bDeviceProtocol; USB 3.0 hub */ + 0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */ + + 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */ + 0x03, 0x00, /* __le16 idProduct; device 0x0003 */ + KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */ + + 0x03, /* __u8 iManufacturer; */ + 0x02, /* __u8 iProduct; */ + 0x01, /* __u8 iSerialNumber; */ + 0x01 /* __u8 bNumConfigurations; */ +}; + +/* usb 2.5 (wireless USB 1.0) root hub device descriptor */ +static const u8 usb25_rh_dev_descriptor[18] = { + 0x12, /* __u8 bLength; */ + USB_DT_DEVICE, /* __u8 bDescriptorType; Device */ + 0x50, 0x02, /* __le16 bcdUSB; v2.5 */ + + 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ + 0x00, /* __u8 bDeviceSubClass; */ + 0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */ + 0xFF, /* __u8 bMaxPacketSize0; always 0xFF (WUSB Spec 7.4.1). */ + + 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */ + 0x02, 0x00, /* __le16 idProduct; device 0x0002 */ + KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */ + + 0x03, /* __u8 iManufacturer; */ + 0x02, /* __u8 iProduct; */ + 0x01, /* __u8 iSerialNumber; */ + 0x01 /* __u8 bNumConfigurations; */ +}; + +/* usb 2.0 root hub device descriptor */ +static const u8 usb2_rh_dev_descriptor[18] = { + 0x12, /* __u8 bLength; */ + USB_DT_DEVICE, /* __u8 bDescriptorType; Device */ + 0x00, 0x02, /* __le16 bcdUSB; v2.0 */ + + 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ + 0x00, /* __u8 bDeviceSubClass; */ + 0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */ + 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */ + + 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */ + 0x02, 0x00, /* __le16 idProduct; device 0x0002 */ + KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */ + + 0x03, /* __u8 iManufacturer; */ + 0x02, /* __u8 iProduct; */ + 0x01, /* __u8 iSerialNumber; */ + 0x01 /* __u8 bNumConfigurations; */ +}; + +/* no usb 2.0 root hub "device qualifier" descriptor: one speed only */ + +/* usb 1.1 root hub device descriptor */ +static const u8 usb11_rh_dev_descriptor[18] = { + 0x12, /* __u8 bLength; */ + USB_DT_DEVICE, /* __u8 bDescriptorType; Device */ + 0x10, 0x01, /* __le16 bcdUSB; v1.1 */ + + 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ + 0x00, /* __u8 bDeviceSubClass; */ + 0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */ + 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */ + + 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */ + 0x01, 0x00, /* __le16 idProduct; device 0x0001 */ + KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */ + + 0x03, /* __u8 iManufacturer; */ + 0x02, /* __u8 iProduct; */ + 0x01, /* __u8 iSerialNumber; */ + 0x01 /* __u8 bNumConfigurations; */ +}; + + +/*-------------------------------------------------------------------------*/ + +/* Configuration descriptors for our root hubs */ + +static const u8 fs_rh_config_descriptor[] = { + + /* one configuration */ + 0x09, /* __u8 bLength; */ + USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */ + 0x19, 0x00, /* __le16 wTotalLength; */ + 0x01, /* __u8 bNumInterfaces; (1) */ + 0x01, /* __u8 bConfigurationValue; */ + 0x00, /* __u8 iConfiguration; */ + 0xc0, /* __u8 bmAttributes; + Bit 7: must be set, + 6: Self-powered, + 5: Remote wakeup, + 4..0: resvd */ + 0x00, /* __u8 MaxPower; */ + + /* USB 1.1: + * USB 2.0, single TT organization (mandatory): + * one interface, protocol 0 + * + * USB 2.0, multiple TT organization (optional): + * two interfaces, protocols 1 (like single TT) + * and 2 (multiple TT mode) ... config is + * sometimes settable + * NOT IMPLEMENTED + */ + + /* one interface */ + 0x09, /* __u8 if_bLength; */ + USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */ + 0x00, /* __u8 if_bInterfaceNumber; */ + 0x00, /* __u8 if_bAlternateSetting; */ + 0x01, /* __u8 if_bNumEndpoints; */ + 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ + 0x00, /* __u8 if_bInterfaceSubClass; */ + 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */ + 0x00, /* __u8 if_iInterface; */ + + /* one endpoint (status change endpoint) */ + 0x07, /* __u8 ep_bLength; */ + USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */ + 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ + 0x03, /* __u8 ep_bmAttributes; Interrupt */ + 0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */ + 0xff /* __u8 ep_bInterval; (255ms -- usb 2.0 spec) */ +}; + +static const u8 hs_rh_config_descriptor[] = { + + /* one configuration */ + 0x09, /* __u8 bLength; */ + USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */ + 0x19, 0x00, /* __le16 wTotalLength; */ + 0x01, /* __u8 bNumInterfaces; (1) */ + 0x01, /* __u8 bConfigurationValue; */ + 0x00, /* __u8 iConfiguration; */ + 0xc0, /* __u8 bmAttributes; + Bit 7: must be set, + 6: Self-powered, + 5: Remote wakeup, + 4..0: resvd */ + 0x00, /* __u8 MaxPower; */ + + /* USB 1.1: + * USB 2.0, single TT organization (mandatory): + * one interface, protocol 0 + * + * USB 2.0, multiple TT organization (optional): + * two interfaces, protocols 1 (like single TT) + * and 2 (multiple TT mode) ... config is + * sometimes settable + * NOT IMPLEMENTED + */ + + /* one interface */ + 0x09, /* __u8 if_bLength; */ + USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */ + 0x00, /* __u8 if_bInterfaceNumber; */ + 0x00, /* __u8 if_bAlternateSetting; */ + 0x01, /* __u8 if_bNumEndpoints; */ + 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ + 0x00, /* __u8 if_bInterfaceSubClass; */ + 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */ + 0x00, /* __u8 if_iInterface; */ + + /* one endpoint (status change endpoint) */ + 0x07, /* __u8 ep_bLength; */ + USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */ + 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ + 0x03, /* __u8 ep_bmAttributes; Interrupt */ + /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) + * see hub.c:hub_configure() for details. */ + (USB_MAXCHILDREN + 1 + 7) / 8, 0x00, + 0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */ +}; + +static const u8 ss_rh_config_descriptor[] = { + /* one configuration */ + 0x09, /* __u8 bLength; */ + USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */ + 0x1f, 0x00, /* __le16 wTotalLength; */ + 0x01, /* __u8 bNumInterfaces; (1) */ + 0x01, /* __u8 bConfigurationValue; */ + 0x00, /* __u8 iConfiguration; */ + 0xc0, /* __u8 bmAttributes; + Bit 7: must be set, + 6: Self-powered, + 5: Remote wakeup, + 4..0: resvd */ + 0x00, /* __u8 MaxPower; */ + + /* one interface */ + 0x09, /* __u8 if_bLength; */ + USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */ + 0x00, /* __u8 if_bInterfaceNumber; */ + 0x00, /* __u8 if_bAlternateSetting; */ + 0x01, /* __u8 if_bNumEndpoints; */ + 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ + 0x00, /* __u8 if_bInterfaceSubClass; */ + 0x00, /* __u8 if_bInterfaceProtocol; */ + 0x00, /* __u8 if_iInterface; */ + + /* one endpoint (status change endpoint) */ + 0x07, /* __u8 ep_bLength; */ + USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */ + 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ + 0x03, /* __u8 ep_bmAttributes; Interrupt */ + /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) + * see hub.c:hub_configure() for details. */ + (USB_MAXCHILDREN + 1 + 7) / 8, 0x00, + 0x0c, /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */ + + /* one SuperSpeed endpoint companion descriptor */ + 0x06, /* __u8 ss_bLength */ + USB_DT_SS_ENDPOINT_COMP, /* __u8 ss_bDescriptorType; SuperSpeed EP */ + /* Companion */ + 0x00, /* __u8 ss_bMaxBurst; allows 1 TX between ACKs */ + 0x00, /* __u8 ss_bmAttributes; 1 packet per service interval */ + 0x02, 0x00 /* __le16 ss_wBytesPerInterval; 15 bits for max 15 ports */ +}; + +/* authorized_default behaviour: + * -1 is authorized for all devices except wireless (old behaviour) + * 0 is unauthorized for all devices + * 1 is authorized for all devices + * 2 is authorized for internal devices + */ +#define USB_AUTHORIZE_WIRED -1 +#define USB_AUTHORIZE_NONE 0 +#define USB_AUTHORIZE_ALL 1 +#define USB_AUTHORIZE_INTERNAL 2 + +static int authorized_default = USB_AUTHORIZE_WIRED; +module_param(authorized_default, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(authorized_default, + "Default USB device authorization: 0 is not authorized, 1 is " + "authorized, 2 is authorized for internal devices, -1 is " + "authorized except for wireless USB (default, old behaviour)"); +/*-------------------------------------------------------------------------*/ + +/** + * ascii2desc() - Helper routine for producing UTF-16LE string descriptors + * @s: Null-terminated ASCII (actually ISO-8859-1) string + * @buf: Buffer for USB string descriptor (header + UTF-16LE) + * @len: Length (in bytes; may be odd) of descriptor buffer. + * + * Return: The number of bytes filled in: 2 + 2*strlen(s) or @len, + * whichever is less. + * + * Note: + * USB String descriptors can contain at most 126 characters; input + * strings longer than that are truncated. + */ +static unsigned +ascii2desc(char const *s, u8 *buf, unsigned len) +{ + unsigned n, t = 2 + 2*strlen(s); + + if (t > 254) + t = 254; /* Longest possible UTF string descriptor */ + if (len > t) + len = t; + + t += USB_DT_STRING << 8; /* Now t is first 16 bits to store */ + + n = len; + while (n--) { + *buf++ = t; + if (!n--) + break; + *buf++ = t >> 8; + t = (unsigned char)*s++; + } + return len; +} + +/** + * rh_string() - provides string descriptors for root hub + * @id: the string ID number (0: langids, 1: serial #, 2: product, 3: vendor) + * @hcd: the host controller for this root hub + * @data: buffer for output packet + * @len: length of the provided buffer + * + * Produces either a manufacturer, product or serial number string for the + * virtual root hub device. + * + * Return: The number of bytes filled in: the length of the descriptor or + * of the provided buffer, whichever is less. + */ +static unsigned +rh_string(int id, struct usb_hcd const *hcd, u8 *data, unsigned len) +{ + char buf[100]; + char const *s; + static char const langids[4] = {4, USB_DT_STRING, 0x09, 0x04}; + + /* language ids */ + switch (id) { + case 0: + /* Array of LANGID codes (0x0409 is MSFT-speak for "en-us") */ + /* See http://www.usb.org/developers/docs/USB_LANGIDs.pdf */ + if (len > 4) + len = 4; + memcpy(data, langids, len); + return len; + case 1: + /* Serial number */ + s = hcd->self.bus_name; + break; + case 2: + /* Product name */ + s = hcd->product_desc; + break; + case 3: + /* Manufacturer */ + snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname, + init_utsname()->release, hcd->driver->description); + s = buf; + break; + default: + /* Can't happen; caller guarantees it */ + return 0; + } + + return ascii2desc(s, data, len); +} + + +/* Root hub control transfers execute synchronously */ +static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) +{ + struct usb_ctrlrequest *cmd; + u16 typeReq, wValue, wIndex, wLength; + u8 *ubuf = urb->transfer_buffer; + unsigned len = 0; + int status; + u8 patch_wakeup = 0; + u8 patch_protocol = 0; + u16 tbuf_size; + u8 *tbuf = NULL; + const u8 *bufp; + + might_sleep(); + + spin_lock_irq(&hcd_root_hub_lock); + status = usb_hcd_link_urb_to_ep(hcd, urb); + spin_unlock_irq(&hcd_root_hub_lock); + if (status) + return status; + urb->hcpriv = hcd; /* Indicate it's queued */ + + cmd = (struct usb_ctrlrequest *) urb->setup_packet; + typeReq = (cmd->bRequestType << 8) | cmd->bRequest; + wValue = le16_to_cpu (cmd->wValue); + wIndex = le16_to_cpu (cmd->wIndex); + wLength = le16_to_cpu (cmd->wLength); + + if (wLength > urb->transfer_buffer_length) + goto error; + + /* + * tbuf should be at least as big as the + * USB hub descriptor. + */ + tbuf_size = max_t(u16, sizeof(struct usb_hub_descriptor), wLength); + tbuf = kzalloc(tbuf_size, GFP_KERNEL); + if (!tbuf) { + status = -ENOMEM; + goto err_alloc; + } + + bufp = tbuf; + + + urb->actual_length = 0; + switch (typeReq) { + + /* DEVICE REQUESTS */ + + /* The root hub's remote wakeup enable bit is implemented using + * driver model wakeup flags. If this system supports wakeup + * through USB, userspace may change the default "allow wakeup" + * policy through sysfs or these calls. + * + * Most root hubs support wakeup from downstream devices, for + * runtime power management (disabling USB clocks and reducing + * VBUS power usage). However, not all of them do so; silicon, + * board, and BIOS bugs here are not uncommon, so these can't + * be treated quite like external hubs. + * + * Likewise, not all root hubs will pass wakeup events upstream, + * to wake up the whole system. So don't assume root hub and + * controller capabilities are identical. + */ + + case DeviceRequest | USB_REQ_GET_STATUS: + tbuf[0] = (device_may_wakeup(&hcd->self.root_hub->dev) + << USB_DEVICE_REMOTE_WAKEUP) + | (1 << USB_DEVICE_SELF_POWERED); + tbuf[1] = 0; + len = 2; + break; + case DeviceOutRequest | USB_REQ_CLEAR_FEATURE: + if (wValue == USB_DEVICE_REMOTE_WAKEUP) + device_set_wakeup_enable(&hcd->self.root_hub->dev, 0); + else + goto error; + break; + case DeviceOutRequest | USB_REQ_SET_FEATURE: + if (device_can_wakeup(&hcd->self.root_hub->dev) + && wValue == USB_DEVICE_REMOTE_WAKEUP) + device_set_wakeup_enable(&hcd->self.root_hub->dev, 1); + else + goto error; + break; + case DeviceRequest | USB_REQ_GET_CONFIGURATION: + tbuf[0] = 1; + len = 1; + fallthrough; + case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: + break; + case DeviceRequest | USB_REQ_GET_DESCRIPTOR: + switch (wValue & 0xff00) { + case USB_DT_DEVICE << 8: + switch (hcd->speed) { + case HCD_USB32: + case HCD_USB31: + bufp = usb31_rh_dev_descriptor; + break; + case HCD_USB3: + bufp = usb3_rh_dev_descriptor; + break; + case HCD_USB25: + bufp = usb25_rh_dev_descriptor; + break; + case HCD_USB2: + bufp = usb2_rh_dev_descriptor; + break; + case HCD_USB11: + bufp = usb11_rh_dev_descriptor; + break; + default: + goto error; + } + len = 18; + if (hcd->has_tt) + patch_protocol = 1; + break; + case USB_DT_CONFIG << 8: + switch (hcd->speed) { + case HCD_USB32: + case HCD_USB31: + case HCD_USB3: + bufp = ss_rh_config_descriptor; + len = sizeof ss_rh_config_descriptor; + break; + case HCD_USB25: + case HCD_USB2: + bufp = hs_rh_config_descriptor; + len = sizeof hs_rh_config_descriptor; + break; + case HCD_USB11: + bufp = fs_rh_config_descriptor; + len = sizeof fs_rh_config_descriptor; + break; + default: + goto error; + } + if (device_can_wakeup(&hcd->self.root_hub->dev)) + patch_wakeup = 1; + break; + case USB_DT_STRING << 8: + if ((wValue & 0xff) < 4) + urb->actual_length = rh_string(wValue & 0xff, + hcd, ubuf, wLength); + else /* unsupported IDs --> "protocol stall" */ + goto error; + break; + case USB_DT_BOS << 8: + goto nongeneric; + default: + goto error; + } + break; + case DeviceRequest | USB_REQ_GET_INTERFACE: + tbuf[0] = 0; + len = 1; + fallthrough; + case DeviceOutRequest | USB_REQ_SET_INTERFACE: + break; + case DeviceOutRequest | USB_REQ_SET_ADDRESS: + /* wValue == urb->dev->devaddr */ + dev_dbg (hcd->self.controller, "root hub device address %d\n", + wValue); + break; + + /* INTERFACE REQUESTS (no defined feature/status flags) */ + + /* ENDPOINT REQUESTS */ + + case EndpointRequest | USB_REQ_GET_STATUS: + /* ENDPOINT_HALT flag */ + tbuf[0] = 0; + tbuf[1] = 0; + len = 2; + fallthrough; + case EndpointOutRequest | USB_REQ_CLEAR_FEATURE: + case EndpointOutRequest | USB_REQ_SET_FEATURE: + dev_dbg (hcd->self.controller, "no endpoint features yet\n"); + break; + + /* CLASS REQUESTS (and errors) */ + + default: +nongeneric: + /* non-generic request */ + switch (typeReq) { + case GetHubStatus: + len = 4; + break; + case GetPortStatus: + if (wValue == HUB_PORT_STATUS) + len = 4; + else + /* other port status types return 8 bytes */ + len = 8; + break; + case GetHubDescriptor: + len = sizeof (struct usb_hub_descriptor); + break; + case DeviceRequest | USB_REQ_GET_DESCRIPTOR: + /* len is returned by hub_control */ + break; + } + status = hcd->driver->hub_control (hcd, + typeReq, wValue, wIndex, + tbuf, wLength); + + if (typeReq == GetHubDescriptor) + usb_hub_adjust_deviceremovable(hcd->self.root_hub, + (struct usb_hub_descriptor *)tbuf); + break; +error: + /* "protocol stall" on error */ + status = -EPIPE; + } + + if (status < 0) { + len = 0; + if (status != -EPIPE) { + dev_dbg (hcd->self.controller, + "CTRL: TypeReq=0x%x val=0x%x " + "idx=0x%x len=%d ==> %d\n", + typeReq, wValue, wIndex, + wLength, status); + } + } else if (status > 0) { + /* hub_control may return the length of data copied. */ + len = status; + status = 0; + } + if (len) { + if (urb->transfer_buffer_length < len) + len = urb->transfer_buffer_length; + urb->actual_length = len; + /* always USB_DIR_IN, toward host */ + memcpy (ubuf, bufp, len); + + /* report whether RH hardware supports remote wakeup */ + if (patch_wakeup && + len > offsetof (struct usb_config_descriptor, + bmAttributes)) + ((struct usb_config_descriptor *)ubuf)->bmAttributes + |= USB_CONFIG_ATT_WAKEUP; + + /* report whether RH hardware has an integrated TT */ + if (patch_protocol && + len > offsetof(struct usb_device_descriptor, + bDeviceProtocol)) + ((struct usb_device_descriptor *) ubuf)-> + bDeviceProtocol = USB_HUB_PR_HS_SINGLE_TT; + } + + kfree(tbuf); + err_alloc: + + /* any errors get returned through the urb completion */ + spin_lock_irq(&hcd_root_hub_lock); + usb_hcd_unlink_urb_from_ep(hcd, urb); + usb_hcd_giveback_urb(hcd, urb, status); + spin_unlock_irq(&hcd_root_hub_lock); + return 0; +} + +/*-------------------------------------------------------------------------*/ + +/* + * Root Hub interrupt transfers are polled using a timer if the + * driver requests it; otherwise the driver is responsible for + * calling usb_hcd_poll_rh_status() when an event occurs. + * + * Completion handler may not sleep. See usb_hcd_giveback_urb() for details. + */ +void usb_hcd_poll_rh_status(struct usb_hcd *hcd) +{ + struct urb *urb; + int length; + int status; + unsigned long flags; + char buffer[6]; /* Any root hubs with > 31 ports? */ + + if (unlikely(!hcd->rh_pollable)) + return; + if (!hcd->uses_new_polling && !hcd->status_urb) + return; + + length = hcd->driver->hub_status_data(hcd, buffer); + if (length > 0) { + + /* try to complete the status urb */ + spin_lock_irqsave(&hcd_root_hub_lock, flags); + urb = hcd->status_urb; + if (urb) { + clear_bit(HCD_FLAG_POLL_PENDING, &hcd->flags); + hcd->status_urb = NULL; + if (urb->transfer_buffer_length >= length) { + status = 0; + } else { + status = -EOVERFLOW; + length = urb->transfer_buffer_length; + } + urb->actual_length = length; + memcpy(urb->transfer_buffer, buffer, length); + + usb_hcd_unlink_urb_from_ep(hcd, urb); + usb_hcd_giveback_urb(hcd, urb, status); + } else { + length = 0; + set_bit(HCD_FLAG_POLL_PENDING, &hcd->flags); + } + spin_unlock_irqrestore(&hcd_root_hub_lock, flags); + } + + /* The USB 2.0 spec says 256 ms. This is close enough and won't + * exceed that limit if HZ is 100. The math is more clunky than + * maybe expected, this is to make sure that all timers for USB devices + * fire at the same time to give the CPU a break in between */ + if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) : + (length == 0 && hcd->status_urb != NULL)) + mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4)); +} +EXPORT_SYMBOL_GPL(usb_hcd_poll_rh_status); + +/* timer callback */ +static void rh_timer_func (struct timer_list *t) +{ + struct usb_hcd *_hcd = from_timer(_hcd, t, rh_timer); + + usb_hcd_poll_rh_status(_hcd); +} + +/*-------------------------------------------------------------------------*/ + +static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb) +{ + int retval; + unsigned long flags; + unsigned len = 1 + (urb->dev->maxchild / 8); + + spin_lock_irqsave (&hcd_root_hub_lock, flags); + if (hcd->status_urb || urb->transfer_buffer_length < len) { + dev_dbg (hcd->self.controller, "not queuing rh status urb\n"); + retval = -EINVAL; + goto done; + } + + retval = usb_hcd_link_urb_to_ep(hcd, urb); + if (retval) + goto done; + + hcd->status_urb = urb; + urb->hcpriv = hcd; /* indicate it's queued */ + if (!hcd->uses_new_polling) + mod_timer(&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4)); + + /* If a status change has already occurred, report it ASAP */ + else if (HCD_POLL_PENDING(hcd)) + mod_timer(&hcd->rh_timer, jiffies); + retval = 0; + done: + spin_unlock_irqrestore (&hcd_root_hub_lock, flags); + return retval; +} + +static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb) +{ + if (usb_endpoint_xfer_int(&urb->ep->desc)) + return rh_queue_status (hcd, urb); + if (usb_endpoint_xfer_control(&urb->ep->desc)) + return rh_call_control (hcd, urb); + return -EINVAL; +} + +/*-------------------------------------------------------------------------*/ + +/* Unlinks of root-hub control URBs are legal, but they don't do anything + * since these URBs always execute synchronously. + */ +static int usb_rh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) +{ + unsigned long flags; + int rc; + + spin_lock_irqsave(&hcd_root_hub_lock, flags); + rc = usb_hcd_check_unlink_urb(hcd, urb, status); + if (rc) + goto done; + + if (usb_endpoint_num(&urb->ep->desc) == 0) { /* Control URB */ + ; /* Do nothing */ + + } else { /* Status URB */ + if (!hcd->uses_new_polling) + del_timer (&hcd->rh_timer); + if (urb == hcd->status_urb) { + hcd->status_urb = NULL; + usb_hcd_unlink_urb_from_ep(hcd, urb); + usb_hcd_giveback_urb(hcd, urb, status); + } + } + done: + spin_unlock_irqrestore(&hcd_root_hub_lock, flags); + return rc; +} + + +/*-------------------------------------------------------------------------*/ + +/** + * usb_bus_init - shared initialization code + * @bus: the bus structure being initialized + * + * This code is used to initialize a usb_bus structure, memory for which is + * separately managed. + */ +static void usb_bus_init (struct usb_bus *bus) +{ + memset (&bus->devmap, 0, sizeof(struct usb_devmap)); + + bus->devnum_next = 1; + + bus->root_hub = NULL; + bus->busnum = -1; + bus->bandwidth_allocated = 0; + bus->bandwidth_int_reqs = 0; + bus->bandwidth_isoc_reqs = 0; + mutex_init(&bus->devnum_next_mutex); +} + +/*-------------------------------------------------------------------------*/ + +/** + * usb_register_bus - registers the USB host controller with the usb core + * @bus: pointer to the bus to register + * + * Context: task context, might sleep. + * + * Assigns a bus number, and links the controller into usbcore data + * structures so that it can be seen by scanning the bus list. + * + * Return: 0 if successful. A negative error code otherwise. + */ +static int usb_register_bus(struct usb_bus *bus) +{ + int result = -E2BIG; + int busnum; + + mutex_lock(&usb_bus_idr_lock); + busnum = idr_alloc(&usb_bus_idr, bus, 1, USB_MAXBUS, GFP_KERNEL); + if (busnum < 0) { + pr_err("%s: failed to get bus number\n", usbcore_name); + goto error_find_busnum; + } + bus->busnum = busnum; + mutex_unlock(&usb_bus_idr_lock); + + usb_notify_add_bus(bus); + + dev_info (bus->controller, "new USB bus registered, assigned bus " + "number %d\n", bus->busnum); + return 0; + +error_find_busnum: + mutex_unlock(&usb_bus_idr_lock); + return result; +} + +/** + * usb_deregister_bus - deregisters the USB host controller + * @bus: pointer to the bus to deregister + * + * Context: task context, might sleep. + * + * Recycles the bus number, and unlinks the controller from usbcore data + * structures so that it won't be seen by scanning the bus list. + */ +static void usb_deregister_bus (struct usb_bus *bus) +{ + dev_info (bus->controller, "USB bus %d deregistered\n", bus->busnum); + + /* + * NOTE: make sure that all the devices are removed by the + * controller code, as well as having it call this when cleaning + * itself up + */ + mutex_lock(&usb_bus_idr_lock); + idr_remove(&usb_bus_idr, bus->busnum); + mutex_unlock(&usb_bus_idr_lock); + + usb_notify_remove_bus(bus); +} + +/** + * register_root_hub - called by usb_add_hcd() to register a root hub + * @hcd: host controller for this root hub + * + * This function registers the root hub with the USB subsystem. It sets up + * the device properly in the device tree and then calls usb_new_device() + * to register the usb device. It also assigns the root hub's USB address + * (always 1). + * + * Return: 0 if successful. A negative error code otherwise. + */ +static int register_root_hub(struct usb_hcd *hcd) +{ + struct device *parent_dev = hcd->self.controller; + struct usb_device *usb_dev = hcd->self.root_hub; + struct usb_device_descriptor *descr; + const int devnum = 1; + int retval; + + usb_dev->devnum = devnum; + usb_dev->bus->devnum_next = devnum + 1; + set_bit (devnum, usb_dev->bus->devmap.devicemap); + usb_set_device_state(usb_dev, USB_STATE_ADDRESS); + + mutex_lock(&usb_bus_idr_lock); + + usb_dev->ep0.desc.wMaxPacketSize = cpu_to_le16(64); + descr = usb_get_device_descriptor(usb_dev); + if (IS_ERR(descr)) { + retval = PTR_ERR(descr); + mutex_unlock(&usb_bus_idr_lock); + dev_dbg (parent_dev, "can't read %s device descriptor %d\n", + dev_name(&usb_dev->dev), retval); + return retval; + } + usb_dev->descriptor = *descr; + kfree(descr); + + if (le16_to_cpu(usb_dev->descriptor.bcdUSB) >= 0x0201) { + retval = usb_get_bos_descriptor(usb_dev); + if (!retval) { + usb_dev->lpm_capable = usb_device_supports_lpm(usb_dev); + } else if (usb_dev->speed >= USB_SPEED_SUPER) { + mutex_unlock(&usb_bus_idr_lock); + dev_dbg(parent_dev, "can't read %s bos descriptor %d\n", + dev_name(&usb_dev->dev), retval); + return retval; + } + } + + retval = usb_new_device (usb_dev); + if (retval) { + dev_err (parent_dev, "can't register root hub for %s, %d\n", + dev_name(&usb_dev->dev), retval); + } else { + spin_lock_irq (&hcd_root_hub_lock); + hcd->rh_registered = 1; + spin_unlock_irq (&hcd_root_hub_lock); + + /* Did the HC die before the root hub was registered? */ + if (HCD_DEAD(hcd)) + usb_hc_died (hcd); /* This time clean up */ + } + mutex_unlock(&usb_bus_idr_lock); + + return retval; +} + +/* + * usb_hcd_start_port_resume - a root-hub port is sending a resume signal + * @bus: the bus which the root hub belongs to + * @portnum: the port which is being resumed + * + * HCDs should call this function when they know that a resume signal is + * being sent to a root-hub port. The root hub will be prevented from + * going into autosuspend until usb_hcd_end_port_resume() is called. + * + * The bus's private lock must be held by the caller. + */ +void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum) +{ + unsigned bit = 1 << portnum; + + if (!(bus->resuming_ports & bit)) { + bus->resuming_ports |= bit; + pm_runtime_get_noresume(&bus->root_hub->dev); + } +} +EXPORT_SYMBOL_GPL(usb_hcd_start_port_resume); + +/* + * usb_hcd_end_port_resume - a root-hub port has stopped sending a resume signal + * @bus: the bus which the root hub belongs to + * @portnum: the port which is being resumed + * + * HCDs should call this function when they know that a resume signal has + * stopped being sent to a root-hub port. The root hub will be allowed to + * autosuspend again. + * + * The bus's private lock must be held by the caller. + */ +void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum) +{ + unsigned bit = 1 << portnum; + + if (bus->resuming_ports & bit) { + bus->resuming_ports &= ~bit; + pm_runtime_put_noidle(&bus->root_hub->dev); + } +} +EXPORT_SYMBOL_GPL(usb_hcd_end_port_resume); + +/*-------------------------------------------------------------------------*/ + +/** + * usb_calc_bus_time - approximate periodic transaction time in nanoseconds + * @speed: from dev->speed; USB_SPEED_{LOW,FULL,HIGH} + * @is_input: true iff the transaction sends data to the host + * @isoc: true for isochronous transactions, false for interrupt ones + * @bytecount: how many bytes in the transaction. + * + * Return: Approximate bus time in nanoseconds for a periodic transaction. + * + * Note: + * See USB 2.0 spec section 5.11.3; only periodic transfers need to be + * scheduled in software, this function is only used for such scheduling. + */ +long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount) +{ + unsigned long tmp; + + switch (speed) { + case USB_SPEED_LOW: /* INTR only */ + if (is_input) { + tmp = (67667L * (31L + 10L * BitTime (bytecount))) / 1000L; + return 64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp; + } else { + tmp = (66700L * (31L + 10L * BitTime (bytecount))) / 1000L; + return 64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp; + } + case USB_SPEED_FULL: /* ISOC or INTR */ + if (isoc) { + tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L; + return ((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp; + } else { + tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L; + return 9107L + BW_HOST_DELAY + tmp; + } + case USB_SPEED_HIGH: /* ISOC or INTR */ + /* FIXME adjust for input vs output */ + if (isoc) + tmp = HS_NSECS_ISO (bytecount); + else + tmp = HS_NSECS (bytecount); + return tmp; + default: + pr_debug ("%s: bogus device speed!\n", usbcore_name); + return -1; + } +} +EXPORT_SYMBOL_GPL(usb_calc_bus_time); + + +/*-------------------------------------------------------------------------*/ + +/* + * Generic HC operations. + */ + +/*-------------------------------------------------------------------------*/ + +/** + * usb_hcd_link_urb_to_ep - add an URB to its endpoint queue + * @hcd: host controller to which @urb was submitted + * @urb: URB being submitted + * + * Host controller drivers should call this routine in their enqueue() + * method. The HCD's private spinlock must be held and interrupts must + * be disabled. The actions carried out here are required for URB + * submission, as well as for endpoint shutdown and for usb_kill_urb. + * + * Return: 0 for no error, otherwise a negative error code (in which case + * the enqueue() method must fail). If no error occurs but enqueue() fails + * anyway, it must call usb_hcd_unlink_urb_from_ep() before releasing + * the private spinlock and returning. + */ +int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb) +{ + int rc = 0; + + spin_lock(&hcd_urb_list_lock); + + /* Check that the URB isn't being killed */ + if (unlikely(atomic_read(&urb->reject))) { + rc = -EPERM; + goto done; + } + + if (unlikely(!urb->ep->enabled)) { + rc = -ENOENT; + goto done; + } + + if (unlikely(!urb->dev->can_submit)) { + rc = -EHOSTUNREACH; + goto done; + } + + /* + * Check the host controller's state and add the URB to the + * endpoint's queue. + */ + if (HCD_RH_RUNNING(hcd)) { + urb->unlinked = 0; + list_add_tail(&urb->urb_list, &urb->ep->urb_list); + } else { + rc = -ESHUTDOWN; + goto done; + } + done: + spin_unlock(&hcd_urb_list_lock); + return rc; +} +EXPORT_SYMBOL_GPL(usb_hcd_link_urb_to_ep); + +/** + * usb_hcd_check_unlink_urb - check whether an URB may be unlinked + * @hcd: host controller to which @urb was submitted + * @urb: URB being checked for unlinkability + * @status: error code to store in @urb if the unlink succeeds + * + * Host controller drivers should call this routine in their dequeue() + * method. The HCD's private spinlock must be held and interrupts must + * be disabled. The actions carried out here are required for making + * sure than an unlink is valid. + * + * Return: 0 for no error, otherwise a negative error code (in which case + * the dequeue() method must fail). The possible error codes are: + * + * -EIDRM: @urb was not submitted or has already completed. + * The completion function may not have been called yet. + * + * -EBUSY: @urb has already been unlinked. + */ +int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb, + int status) +{ + struct list_head *tmp; + + /* insist the urb is still queued */ + list_for_each(tmp, &urb->ep->urb_list) { + if (tmp == &urb->urb_list) + break; + } + if (tmp != &urb->urb_list) + return -EIDRM; + + /* Any status except -EINPROGRESS means something already started to + * unlink this URB from the hardware. So there's no more work to do. + */ + if (urb->unlinked) + return -EBUSY; + urb->unlinked = status; + return 0; +} +EXPORT_SYMBOL_GPL(usb_hcd_check_unlink_urb); + +/** + * usb_hcd_unlink_urb_from_ep - remove an URB from its endpoint queue + * @hcd: host controller to which @urb was submitted + * @urb: URB being unlinked + * + * Host controller drivers should call this routine before calling + * usb_hcd_giveback_urb(). The HCD's private spinlock must be held and + * interrupts must be disabled. The actions carried out here are required + * for URB completion. + */ +void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb) +{ + /* clear all state linking urb to this dev (and hcd) */ + spin_lock(&hcd_urb_list_lock); + list_del_init(&urb->urb_list); + spin_unlock(&hcd_urb_list_lock); +} +EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep); + +/* + * Some usb host controllers can only perform dma using a small SRAM area, + * or have restrictions on addressable DRAM. + * The usb core itself is however optimized for host controllers that can dma + * using regular system memory - like pci devices doing bus mastering. + * + * To support host controllers with limited dma capabilities we provide dma + * bounce buffers. This feature can be enabled by initializing + * hcd->localmem_pool using usb_hcd_setup_local_mem(). + * + * The initialized hcd->localmem_pool then tells the usb code to allocate all + * data for dma using the genalloc API. + * + * So, to summarize... + * + * - We need "local" memory, canonical example being + * a small SRAM on a discrete controller being the + * only memory that the controller can read ... + * (a) "normal" kernel memory is no good, and + * (b) there's not enough to share + * + * - So we use that, even though the primary requirement + * is that the memory be "local" (hence addressable + * by that device), not "coherent". + * + */ + +static int hcd_alloc_coherent(struct usb_bus *bus, + gfp_t mem_flags, dma_addr_t *dma_handle, + void **vaddr_handle, size_t size, + enum dma_data_direction dir) +{ + unsigned char *vaddr; + + if (*vaddr_handle == NULL) { + WARN_ON_ONCE(1); + return -EFAULT; + } + + vaddr = hcd_buffer_alloc(bus, size + sizeof(unsigned long), + mem_flags, dma_handle); + if (!vaddr) + return -ENOMEM; + + /* + * Store the virtual address of the buffer at the end + * of the allocated dma buffer. The size of the buffer + * may be uneven so use unaligned functions instead + * of just rounding up. It makes sense to optimize for + * memory footprint over access speed since the amount + * of memory available for dma may be limited. + */ + put_unaligned((unsigned long)*vaddr_handle, + (unsigned long *)(vaddr + size)); + + if (dir == DMA_TO_DEVICE) + memcpy(vaddr, *vaddr_handle, size); + + *vaddr_handle = vaddr; + return 0; +} + +static void hcd_free_coherent(struct usb_bus *bus, dma_addr_t *dma_handle, + void **vaddr_handle, size_t size, + enum dma_data_direction dir) +{ + unsigned char *vaddr = *vaddr_handle; + + vaddr = (void *)get_unaligned((unsigned long *)(vaddr + size)); + + if (dir == DMA_FROM_DEVICE) + memcpy(vaddr, *vaddr_handle, size); + + hcd_buffer_free(bus, size + sizeof(vaddr), *vaddr_handle, *dma_handle); + + *vaddr_handle = vaddr; + *dma_handle = 0; +} + +void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *hcd, struct urb *urb) +{ + if (IS_ENABLED(CONFIG_HAS_DMA) && + (urb->transfer_flags & URB_SETUP_MAP_SINGLE)) + dma_unmap_single(hcd->self.sysdev, + urb->setup_dma, + sizeof(struct usb_ctrlrequest), + DMA_TO_DEVICE); + else if (urb->transfer_flags & URB_SETUP_MAP_LOCAL) + hcd_free_coherent(urb->dev->bus, + &urb->setup_dma, + (void **) &urb->setup_packet, + sizeof(struct usb_ctrlrequest), + DMA_TO_DEVICE); + + /* Make it safe to call this routine more than once */ + urb->transfer_flags &= ~(URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL); +} +EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_setup_for_dma); + +static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) +{ + if (hcd->driver->unmap_urb_for_dma) + hcd->driver->unmap_urb_for_dma(hcd, urb); + else + usb_hcd_unmap_urb_for_dma(hcd, urb); +} + +void usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) +{ + enum dma_data_direction dir; + + usb_hcd_unmap_urb_setup_for_dma(hcd, urb); + + dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + if (IS_ENABLED(CONFIG_HAS_DMA) && + (urb->transfer_flags & URB_DMA_MAP_SG)) + dma_unmap_sg(hcd->self.sysdev, + urb->sg, + urb->num_sgs, + dir); + else if (IS_ENABLED(CONFIG_HAS_DMA) && + (urb->transfer_flags & URB_DMA_MAP_PAGE)) + dma_unmap_page(hcd->self.sysdev, + urb->transfer_dma, + urb->transfer_buffer_length, + dir); + else if (IS_ENABLED(CONFIG_HAS_DMA) && + (urb->transfer_flags & URB_DMA_MAP_SINGLE)) + dma_unmap_single(hcd->self.sysdev, + urb->transfer_dma, + urb->transfer_buffer_length, + dir); + else if (urb->transfer_flags & URB_MAP_LOCAL) + hcd_free_coherent(urb->dev->bus, + &urb->transfer_dma, + &urb->transfer_buffer, + urb->transfer_buffer_length, + dir); + + /* Make it safe to call this routine more than once */ + urb->transfer_flags &= ~(URB_DMA_MAP_SG | URB_DMA_MAP_PAGE | + URB_DMA_MAP_SINGLE | URB_MAP_LOCAL); +} +EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_for_dma); + +static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, + gfp_t mem_flags) +{ + if (hcd->driver->map_urb_for_dma) + return hcd->driver->map_urb_for_dma(hcd, urb, mem_flags); + else + return usb_hcd_map_urb_for_dma(hcd, urb, mem_flags); +} + +int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, + gfp_t mem_flags) +{ + enum dma_data_direction dir; + int ret = 0; + + /* Map the URB's buffers for DMA access. + * Lower level HCD code should use *_dma exclusively, + * unless it uses pio or talks to another transport, + * or uses the provided scatter gather list for bulk. + */ + + if (usb_endpoint_xfer_control(&urb->ep->desc)) { + if (hcd->self.uses_pio_for_control) + return ret; + if (hcd->localmem_pool) { + ret = hcd_alloc_coherent( + urb->dev->bus, mem_flags, + &urb->setup_dma, + (void **)&urb->setup_packet, + sizeof(struct usb_ctrlrequest), + DMA_TO_DEVICE); + if (ret) + return ret; + urb->transfer_flags |= URB_SETUP_MAP_LOCAL; + } else if (hcd_uses_dma(hcd)) { + if (object_is_on_stack(urb->setup_packet)) { + WARN_ONCE(1, "setup packet is on stack\n"); + return -EAGAIN; + } + + urb->setup_dma = dma_map_single( + hcd->self.sysdev, + urb->setup_packet, + sizeof(struct usb_ctrlrequest), + DMA_TO_DEVICE); + if (dma_mapping_error(hcd->self.sysdev, + urb->setup_dma)) + return -EAGAIN; + urb->transfer_flags |= URB_SETUP_MAP_SINGLE; + } + } + + dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + if (urb->transfer_buffer_length != 0 + && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) { + if (hcd->localmem_pool) { + ret = hcd_alloc_coherent( + urb->dev->bus, mem_flags, + &urb->transfer_dma, + &urb->transfer_buffer, + urb->transfer_buffer_length, + dir); + if (ret == 0) + urb->transfer_flags |= URB_MAP_LOCAL; + } else if (hcd_uses_dma(hcd)) { + if (urb->num_sgs) { + int n; + + /* We don't support sg for isoc transfers ! */ + if (usb_endpoint_xfer_isoc(&urb->ep->desc)) { + WARN_ON(1); + return -EINVAL; + } + + n = dma_map_sg( + hcd->self.sysdev, + urb->sg, + urb->num_sgs, + dir); + if (!n) + ret = -EAGAIN; + else + urb->transfer_flags |= URB_DMA_MAP_SG; + urb->num_mapped_sgs = n; + if (n != urb->num_sgs) + urb->transfer_flags |= + URB_DMA_SG_COMBINED; + } else if (urb->sg) { + struct scatterlist *sg = urb->sg; + urb->transfer_dma = dma_map_page( + hcd->self.sysdev, + sg_page(sg), + sg->offset, + urb->transfer_buffer_length, + dir); + if (dma_mapping_error(hcd->self.sysdev, + urb->transfer_dma)) + ret = -EAGAIN; + else + urb->transfer_flags |= URB_DMA_MAP_PAGE; + } else if (object_is_on_stack(urb->transfer_buffer)) { + WARN_ONCE(1, "transfer buffer is on stack\n"); + ret = -EAGAIN; + } else { + urb->transfer_dma = dma_map_single( + hcd->self.sysdev, + urb->transfer_buffer, + urb->transfer_buffer_length, + dir); + if (dma_mapping_error(hcd->self.sysdev, + urb->transfer_dma)) + ret = -EAGAIN; + else + urb->transfer_flags |= URB_DMA_MAP_SINGLE; + } + } + if (ret && (urb->transfer_flags & (URB_SETUP_MAP_SINGLE | + URB_SETUP_MAP_LOCAL))) + usb_hcd_unmap_urb_for_dma(hcd, urb); + } + return ret; +} +EXPORT_SYMBOL_GPL(usb_hcd_map_urb_for_dma); + +/*-------------------------------------------------------------------------*/ + +/* may be called in any context with a valid urb->dev usecount + * caller surrenders "ownership" of urb + * expects usb_submit_urb() to have sanity checked and conditioned all + * inputs in the urb + */ +int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags) +{ + int status; + struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus); + + /* increment urb's reference count as part of giving it to the HCD + * (which will control it). HCD guarantees that it either returns + * an error or calls giveback(), but not both. + */ + usb_get_urb(urb); + atomic_inc(&urb->use_count); + atomic_inc(&urb->dev->urbnum); + usbmon_urb_submit(&hcd->self, urb); + + /* NOTE requirements on root-hub callers (usbfs and the hub + * driver, for now): URBs' urb->transfer_buffer must be + * valid and usb_buffer_{sync,unmap}() not be needed, since + * they could clobber root hub response data. Also, control + * URBs must be submitted in process context with interrupts + * enabled. + */ + + if (is_root_hub(urb->dev)) { + status = rh_urb_enqueue(hcd, urb); + } else { + status = map_urb_for_dma(hcd, urb, mem_flags); + if (likely(status == 0)) { + status = hcd->driver->urb_enqueue(hcd, urb, mem_flags); + if (unlikely(status)) + unmap_urb_for_dma(hcd, urb); + } + } + + if (unlikely(status)) { + usbmon_urb_submit_error(&hcd->self, urb, status); + urb->hcpriv = NULL; + INIT_LIST_HEAD(&urb->urb_list); + atomic_dec(&urb->use_count); + /* + * Order the write of urb->use_count above before the read + * of urb->reject below. Pairs with the memory barriers in + * usb_kill_urb() and usb_poison_urb(). + */ + smp_mb__after_atomic(); + + atomic_dec(&urb->dev->urbnum); + if (atomic_read(&urb->reject)) + wake_up(&usb_kill_urb_queue); + usb_put_urb(urb); + } + return status; +} + +/*-------------------------------------------------------------------------*/ + +/* this makes the hcd giveback() the urb more quickly, by kicking it + * off hardware queues (which may take a while) and returning it as + * soon as practical. we've already set up the urb's return status, + * but we can't know if the callback completed already. + */ +static int unlink1(struct usb_hcd *hcd, struct urb *urb, int status) +{ + int value; + + if (is_root_hub(urb->dev)) + value = usb_rh_urb_dequeue(hcd, urb, status); + else { + + /* The only reason an HCD might fail this call is if + * it has not yet fully queued the urb to begin with. + * Such failures should be harmless. */ + value = hcd->driver->urb_dequeue(hcd, urb, status); + } + return value; +} + +/* + * called in any context + * + * caller guarantees urb won't be recycled till both unlink() + * and the urb's completion function return + */ +int usb_hcd_unlink_urb (struct urb *urb, int status) +{ + struct usb_hcd *hcd; + struct usb_device *udev = urb->dev; + int retval = -EIDRM; + unsigned long flags; + + /* Prevent the device and bus from going away while + * the unlink is carried out. If they are already gone + * then urb->use_count must be 0, since disconnected + * devices can't have any active URBs. + */ + spin_lock_irqsave(&hcd_urb_unlink_lock, flags); + if (atomic_read(&urb->use_count) > 0) { + retval = 0; + usb_get_dev(udev); + } + spin_unlock_irqrestore(&hcd_urb_unlink_lock, flags); + if (retval == 0) { + hcd = bus_to_hcd(urb->dev->bus); + retval = unlink1(hcd, urb, status); + if (retval == 0) + retval = -EINPROGRESS; + else if (retval != -EIDRM && retval != -EBUSY) + dev_dbg(&udev->dev, "hcd_unlink_urb %pK fail %d\n", + urb, retval); + usb_put_dev(udev); + } + return retval; +} + +/*-------------------------------------------------------------------------*/ + +static void __usb_hcd_giveback_urb(struct urb *urb) +{ + struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus); + struct usb_anchor *anchor = urb->anchor; + int status = urb->unlinked; + + urb->hcpriv = NULL; + if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) && + urb->actual_length < urb->transfer_buffer_length && + !status)) + status = -EREMOTEIO; + + unmap_urb_for_dma(hcd, urb); + usbmon_urb_complete(&hcd->self, urb, status); + usb_anchor_suspend_wakeups(anchor); + usb_unanchor_urb(urb); + if (likely(status == 0)) + usb_led_activity(USB_LED_EVENT_HOST); + + /* pass ownership to the completion handler */ + urb->status = status; + /* + * This function can be called in task context inside another remote + * coverage collection section, but kcov doesn't support that kind of + * recursion yet. Only collect coverage in softirq context for now. + */ + kcov_remote_start_usb_softirq((u64)urb->dev->bus->busnum); + urb->complete(urb); + kcov_remote_stop_softirq(); + + usb_anchor_resume_wakeups(anchor); + atomic_dec(&urb->use_count); + /* + * Order the write of urb->use_count above before the read + * of urb->reject below. Pairs with the memory barriers in + * usb_kill_urb() and usb_poison_urb(). + */ + smp_mb__after_atomic(); + + if (unlikely(atomic_read(&urb->reject))) + wake_up(&usb_kill_urb_queue); + usb_put_urb(urb); +} + +static void usb_giveback_urb_bh(struct tasklet_struct *t) +{ + struct giveback_urb_bh *bh = from_tasklet(bh, t, bh); + struct list_head local_list; + + spin_lock_irq(&bh->lock); + bh->running = true; + list_replace_init(&bh->head, &local_list); + spin_unlock_irq(&bh->lock); + + while (!list_empty(&local_list)) { + struct urb *urb; + + urb = list_entry(local_list.next, struct urb, urb_list); + list_del_init(&urb->urb_list); + bh->completing_ep = urb->ep; + __usb_hcd_giveback_urb(urb); + bh->completing_ep = NULL; + } + + /* + * giveback new URBs next time to prevent this function + * from not exiting for a long time. + */ + spin_lock_irq(&bh->lock); + if (!list_empty(&bh->head)) { + if (bh->high_prio) + tasklet_hi_schedule(&bh->bh); + else + tasklet_schedule(&bh->bh); + } + bh->running = false; + spin_unlock_irq(&bh->lock); +} + +/** + * usb_hcd_giveback_urb - return URB from HCD to device driver + * @hcd: host controller returning the URB + * @urb: urb being returned to the USB device driver. + * @status: completion status code for the URB. + * + * Context: atomic. The completion callback is invoked in caller's context. + * For HCDs with HCD_BH flag set, the completion callback is invoked in tasklet + * context (except for URBs submitted to the root hub which always complete in + * caller's context). + * + * This hands the URB from HCD to its USB device driver, using its + * completion function. The HCD has freed all per-urb resources + * (and is done using urb->hcpriv). It also released all HCD locks; + * the device driver won't cause problems if it frees, modifies, + * or resubmits this URB. + * + * If @urb was unlinked, the value of @status will be overridden by + * @urb->unlinked. Erroneous short transfers are detected in case + * the HCD hasn't checked for them. + */ +void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status) +{ + struct giveback_urb_bh *bh; + bool running; + + /* pass status to tasklet via unlinked */ + if (likely(!urb->unlinked)) + urb->unlinked = status; + + if (!hcd_giveback_urb_in_bh(hcd) && !is_root_hub(urb->dev)) { + __usb_hcd_giveback_urb(urb); + return; + } + + if (usb_pipeisoc(urb->pipe) || usb_pipeint(urb->pipe)) + bh = &hcd->high_prio_bh; + else + bh = &hcd->low_prio_bh; + + spin_lock(&bh->lock); + list_add_tail(&urb->urb_list, &bh->head); + running = bh->running; + spin_unlock(&bh->lock); + + if (running) + ; + else if (bh->high_prio) + tasklet_hi_schedule(&bh->bh); + else + tasklet_schedule(&bh->bh); +} +EXPORT_SYMBOL_GPL(usb_hcd_giveback_urb); + +/*-------------------------------------------------------------------------*/ + +/* Cancel all URBs pending on this endpoint and wait for the endpoint's + * queue to drain completely. The caller must first insure that no more + * URBs can be submitted for this endpoint. + */ +void usb_hcd_flush_endpoint(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + struct usb_hcd *hcd; + struct urb *urb; + + if (!ep) + return; + might_sleep(); + hcd = bus_to_hcd(udev->bus); + + /* No more submits can occur */ + spin_lock_irq(&hcd_urb_list_lock); +rescan: + list_for_each_entry_reverse(urb, &ep->urb_list, urb_list) { + int is_in; + + if (urb->unlinked) + continue; + usb_get_urb (urb); + is_in = usb_urb_dir_in(urb); + spin_unlock(&hcd_urb_list_lock); + + /* kick hcd */ + unlink1(hcd, urb, -ESHUTDOWN); + dev_dbg (hcd->self.controller, + "shutdown urb %pK ep%d%s-%s\n", + urb, usb_endpoint_num(&ep->desc), + is_in ? "in" : "out", + usb_ep_type_string(usb_endpoint_type(&ep->desc))); + usb_put_urb (urb); + + /* list contents may have changed */ + spin_lock(&hcd_urb_list_lock); + goto rescan; + } + spin_unlock_irq(&hcd_urb_list_lock); + + /* Wait until the endpoint queue is completely empty */ + while (!list_empty (&ep->urb_list)) { + spin_lock_irq(&hcd_urb_list_lock); + + /* The list may have changed while we acquired the spinlock */ + urb = NULL; + if (!list_empty (&ep->urb_list)) { + urb = list_entry (ep->urb_list.prev, struct urb, + urb_list); + usb_get_urb (urb); + } + spin_unlock_irq(&hcd_urb_list_lock); + + if (urb) { + usb_kill_urb (urb); + usb_put_urb (urb); + } + } +} + +/** + * usb_hcd_alloc_bandwidth - check whether a new bandwidth setting exceeds + * the bus bandwidth + * @udev: target &usb_device + * @new_config: new configuration to install + * @cur_alt: the current alternate interface setting + * @new_alt: alternate interface setting that is being installed + * + * To change configurations, pass in the new configuration in new_config, + * and pass NULL for cur_alt and new_alt. + * + * To reset a device's configuration (put the device in the ADDRESSED state), + * pass in NULL for new_config, cur_alt, and new_alt. + * + * To change alternate interface settings, pass in NULL for new_config, + * pass in the current alternate interface setting in cur_alt, + * and pass in the new alternate interface setting in new_alt. + * + * Return: An error if the requested bandwidth change exceeds the + * bus bandwidth or host controller internal resources. + */ +int usb_hcd_alloc_bandwidth(struct usb_device *udev, + struct usb_host_config *new_config, + struct usb_host_interface *cur_alt, + struct usb_host_interface *new_alt) +{ + int num_intfs, i, j; + struct usb_host_interface *alt = NULL; + int ret = 0; + struct usb_hcd *hcd; + struct usb_host_endpoint *ep; + + hcd = bus_to_hcd(udev->bus); + if (!hcd->driver->check_bandwidth) + return 0; + + /* Configuration is being removed - set configuration 0 */ + if (!new_config && !cur_alt) { + for (i = 1; i < 16; ++i) { + ep = udev->ep_out[i]; + if (ep) + hcd->driver->drop_endpoint(hcd, udev, ep); + ep = udev->ep_in[i]; + if (ep) + hcd->driver->drop_endpoint(hcd, udev, ep); + } + hcd->driver->check_bandwidth(hcd, udev); + return 0; + } + /* Check if the HCD says there's enough bandwidth. Enable all endpoints + * each interface's alt setting 0 and ask the HCD to check the bandwidth + * of the bus. There will always be bandwidth for endpoint 0, so it's + * ok to exclude it. + */ + if (new_config) { + num_intfs = new_config->desc.bNumInterfaces; + /* Remove endpoints (except endpoint 0, which is always on the + * schedule) from the old config from the schedule + */ + for (i = 1; i < 16; ++i) { + ep = udev->ep_out[i]; + if (ep) { + ret = hcd->driver->drop_endpoint(hcd, udev, ep); + if (ret < 0) + goto reset; + } + ep = udev->ep_in[i]; + if (ep) { + ret = hcd->driver->drop_endpoint(hcd, udev, ep); + if (ret < 0) + goto reset; + } + } + for (i = 0; i < num_intfs; ++i) { + struct usb_host_interface *first_alt; + int iface_num; + + first_alt = &new_config->intf_cache[i]->altsetting[0]; + iface_num = first_alt->desc.bInterfaceNumber; + /* Set up endpoints for alternate interface setting 0 */ + alt = usb_find_alt_setting(new_config, iface_num, 0); + if (!alt) + /* No alt setting 0? Pick the first setting. */ + alt = first_alt; + + for (j = 0; j < alt->desc.bNumEndpoints; j++) { + ret = hcd->driver->add_endpoint(hcd, udev, &alt->endpoint[j]); + if (ret < 0) + goto reset; + } + } + } + if (cur_alt && new_alt) { + struct usb_interface *iface = usb_ifnum_to_if(udev, + cur_alt->desc.bInterfaceNumber); + + if (!iface) + return -EINVAL; + if (iface->resetting_device) { + /* + * The USB core just reset the device, so the xHCI host + * and the device will think alt setting 0 is installed. + * However, the USB core will pass in the alternate + * setting installed before the reset as cur_alt. Dig + * out the alternate setting 0 structure, or the first + * alternate setting if a broken device doesn't have alt + * setting 0. + */ + cur_alt = usb_altnum_to_altsetting(iface, 0); + if (!cur_alt) + cur_alt = &iface->altsetting[0]; + } + + /* Drop all the endpoints in the current alt setting */ + for (i = 0; i < cur_alt->desc.bNumEndpoints; i++) { + ret = hcd->driver->drop_endpoint(hcd, udev, + &cur_alt->endpoint[i]); + if (ret < 0) + goto reset; + } + /* Add all the endpoints in the new alt setting */ + for (i = 0; i < new_alt->desc.bNumEndpoints; i++) { + ret = hcd->driver->add_endpoint(hcd, udev, + &new_alt->endpoint[i]); + if (ret < 0) + goto reset; + } + } + ret = hcd->driver->check_bandwidth(hcd, udev); +reset: + if (ret < 0) + hcd->driver->reset_bandwidth(hcd, udev); + return ret; +} + +/* Disables the endpoint: synchronizes with the hcd to make sure all + * endpoint state is gone from hardware. usb_hcd_flush_endpoint() must + * have been called previously. Use for set_configuration, set_interface, + * driver removal, physical disconnect. + * + * example: a qh stored in ep->hcpriv, holding state related to endpoint + * type, maxpacket size, toggle, halt status, and scheduling. + */ +void usb_hcd_disable_endpoint(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + struct usb_hcd *hcd; + + might_sleep(); + hcd = bus_to_hcd(udev->bus); + if (hcd->driver->endpoint_disable) + hcd->driver->endpoint_disable(hcd, ep); +} + +/** + * usb_hcd_reset_endpoint - reset host endpoint state + * @udev: USB device. + * @ep: the endpoint to reset. + * + * Resets any host endpoint state such as the toggle bit, sequence + * number and current window. + */ +void usb_hcd_reset_endpoint(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + + if (hcd->driver->endpoint_reset) + hcd->driver->endpoint_reset(hcd, ep); + else { + int epnum = usb_endpoint_num(&ep->desc); + int is_out = usb_endpoint_dir_out(&ep->desc); + int is_control = usb_endpoint_xfer_control(&ep->desc); + + usb_settoggle(udev, epnum, is_out, 0); + if (is_control) + usb_settoggle(udev, epnum, !is_out, 0); + } +} + +/** + * usb_alloc_streams - allocate bulk endpoint stream IDs. + * @interface: alternate setting that includes all endpoints. + * @eps: array of endpoints that need streams. + * @num_eps: number of endpoints in the array. + * @num_streams: number of streams to allocate. + * @mem_flags: flags hcd should use to allocate memory. + * + * Sets up a group of bulk endpoints to have @num_streams stream IDs available. + * Drivers may queue multiple transfers to different stream IDs, which may + * complete in a different order than they were queued. + * + * Return: On success, the number of allocated streams. On failure, a negative + * error code. + */ +int usb_alloc_streams(struct usb_interface *interface, + struct usb_host_endpoint **eps, unsigned int num_eps, + unsigned int num_streams, gfp_t mem_flags) +{ + struct usb_hcd *hcd; + struct usb_device *dev; + int i, ret; + + dev = interface_to_usbdev(interface); + hcd = bus_to_hcd(dev->bus); + if (!hcd->driver->alloc_streams || !hcd->driver->free_streams) + return -EINVAL; + if (dev->speed < USB_SPEED_SUPER) + return -EINVAL; + if (dev->state < USB_STATE_CONFIGURED) + return -ENODEV; + + for (i = 0; i < num_eps; i++) { + /* Streams only apply to bulk endpoints. */ + if (!usb_endpoint_xfer_bulk(&eps[i]->desc)) + return -EINVAL; + /* Re-alloc is not allowed */ + if (eps[i]->streams) + return -EINVAL; + } + + ret = hcd->driver->alloc_streams(hcd, dev, eps, num_eps, + num_streams, mem_flags); + if (ret < 0) + return ret; + + for (i = 0; i < num_eps; i++) + eps[i]->streams = ret; + + return ret; +} +EXPORT_SYMBOL_GPL(usb_alloc_streams); + +/** + * usb_free_streams - free bulk endpoint stream IDs. + * @interface: alternate setting that includes all endpoints. + * @eps: array of endpoints to remove streams from. + * @num_eps: number of endpoints in the array. + * @mem_flags: flags hcd should use to allocate memory. + * + * Reverts a group of bulk endpoints back to not using stream IDs. + * Can fail if we are given bad arguments, or HCD is broken. + * + * Return: 0 on success. On failure, a negative error code. + */ +int usb_free_streams(struct usb_interface *interface, + struct usb_host_endpoint **eps, unsigned int num_eps, + gfp_t mem_flags) +{ + struct usb_hcd *hcd; + struct usb_device *dev; + int i, ret; + + dev = interface_to_usbdev(interface); + hcd = bus_to_hcd(dev->bus); + if (dev->speed < USB_SPEED_SUPER) + return -EINVAL; + + /* Double-free is not allowed */ + for (i = 0; i < num_eps; i++) + if (!eps[i] || !eps[i]->streams) + return -EINVAL; + + ret = hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags); + if (ret < 0) + return ret; + + for (i = 0; i < num_eps; i++) + eps[i]->streams = 0; + + return ret; +} +EXPORT_SYMBOL_GPL(usb_free_streams); + +/* Protect against drivers that try to unlink URBs after the device + * is gone, by waiting until all unlinks for @udev are finished. + * Since we don't currently track URBs by device, simply wait until + * nothing is running in the locked region of usb_hcd_unlink_urb(). + */ +void usb_hcd_synchronize_unlinks(struct usb_device *udev) +{ + spin_lock_irq(&hcd_urb_unlink_lock); + spin_unlock_irq(&hcd_urb_unlink_lock); +} + +/*-------------------------------------------------------------------------*/ + +/* called in any context */ +int usb_hcd_get_frame_number (struct usb_device *udev) +{ + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + + if (!HCD_RH_RUNNING(hcd)) + return -ESHUTDOWN; + return hcd->driver->get_frame_number (hcd); +} + +/*-------------------------------------------------------------------------*/ +#ifdef CONFIG_USB_HCD_TEST_MODE + +static void usb_ehset_completion(struct urb *urb) +{ + struct completion *done = urb->context; + + complete(done); +} +/* + * Allocate and initialize a control URB. This request will be used by the + * EHSET SINGLE_STEP_SET_FEATURE test in which the DATA and STATUS stages + * of the GetDescriptor request are sent 15 seconds after the SETUP stage. + * Return NULL if failed. + */ +static struct urb *request_single_step_set_feature_urb( + struct usb_device *udev, + void *dr, + void *buf, + struct completion *done) +{ + struct urb *urb; + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) + return NULL; + + urb->pipe = usb_rcvctrlpipe(udev, 0); + + urb->ep = &udev->ep0; + urb->dev = udev; + urb->setup_packet = (void *)dr; + urb->transfer_buffer = buf; + urb->transfer_buffer_length = USB_DT_DEVICE_SIZE; + urb->complete = usb_ehset_completion; + urb->status = -EINPROGRESS; + urb->actual_length = 0; + urb->transfer_flags = URB_DIR_IN; + usb_get_urb(urb); + atomic_inc(&urb->use_count); + atomic_inc(&urb->dev->urbnum); + if (map_urb_for_dma(hcd, urb, GFP_KERNEL)) { + usb_put_urb(urb); + usb_free_urb(urb); + return NULL; + } + + urb->context = done; + return urb; +} + +int ehset_single_step_set_feature(struct usb_hcd *hcd, int port) +{ + int retval = -ENOMEM; + struct usb_ctrlrequest *dr; + struct urb *urb; + struct usb_device *udev; + struct usb_device_descriptor *buf; + DECLARE_COMPLETION_ONSTACK(done); + + /* Obtain udev of the rhub's child port */ + udev = usb_hub_find_child(hcd->self.root_hub, port); + if (!udev) { + dev_err(hcd->self.controller, "No device attached to the RootHub\n"); + return -ENODEV; + } + buf = kmalloc(USB_DT_DEVICE_SIZE, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL); + if (!dr) { + kfree(buf); + return -ENOMEM; + } + + /* Fill Setup packet for GetDescriptor */ + dr->bRequestType = USB_DIR_IN; + dr->bRequest = USB_REQ_GET_DESCRIPTOR; + dr->wValue = cpu_to_le16(USB_DT_DEVICE << 8); + dr->wIndex = 0; + dr->wLength = cpu_to_le16(USB_DT_DEVICE_SIZE); + urb = request_single_step_set_feature_urb(udev, dr, buf, &done); + if (!urb) + goto cleanup; + + /* Submit just the SETUP stage */ + retval = hcd->driver->submit_single_step_set_feature(hcd, urb, 1); + if (retval) + goto out1; + if (!wait_for_completion_timeout(&done, msecs_to_jiffies(2000))) { + usb_kill_urb(urb); + retval = -ETIMEDOUT; + dev_err(hcd->self.controller, + "%s SETUP stage timed out on ep0\n", __func__); + goto out1; + } + msleep(15 * 1000); + + /* Complete remaining DATA and STATUS stages using the same URB */ + urb->status = -EINPROGRESS; + usb_get_urb(urb); + atomic_inc(&urb->use_count); + atomic_inc(&urb->dev->urbnum); + retval = hcd->driver->submit_single_step_set_feature(hcd, urb, 0); + if (!retval && !wait_for_completion_timeout(&done, + msecs_to_jiffies(2000))) { + usb_kill_urb(urb); + retval = -ETIMEDOUT; + dev_err(hcd->self.controller, + "%s IN stage timed out on ep0\n", __func__); + } +out1: + usb_free_urb(urb); +cleanup: + kfree(dr); + kfree(buf); + return retval; +} +EXPORT_SYMBOL_GPL(ehset_single_step_set_feature); +#endif /* CONFIG_USB_HCD_TEST_MODE */ + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_PM + +int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg) +{ + struct usb_hcd *hcd = bus_to_hcd(rhdev->bus); + int status; + int old_state = hcd->state; + + dev_dbg(&rhdev->dev, "bus %ssuspend, wakeup %d\n", + (PMSG_IS_AUTO(msg) ? "auto-" : ""), + rhdev->do_remote_wakeup); + if (HCD_DEAD(hcd)) { + dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "suspend"); + return 0; + } + + if (!hcd->driver->bus_suspend) { + status = -ENOENT; + } else { + clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags); + hcd->state = HC_STATE_QUIESCING; + status = hcd->driver->bus_suspend(hcd); + } + if (status == 0) { + usb_set_device_state(rhdev, USB_STATE_SUSPENDED); + hcd->state = HC_STATE_SUSPENDED; + + if (!PMSG_IS_AUTO(msg)) + usb_phy_roothub_suspend(hcd->self.sysdev, + hcd->phy_roothub); + + /* Did we race with a root-hub wakeup event? */ + if (rhdev->do_remote_wakeup) { + char buffer[6]; + + status = hcd->driver->hub_status_data(hcd, buffer); + if (status != 0) { + dev_dbg(&rhdev->dev, "suspend raced with wakeup event\n"); + hcd_bus_resume(rhdev, PMSG_AUTO_RESUME); + status = -EBUSY; + } + } + } else { + spin_lock_irq(&hcd_root_hub_lock); + if (!HCD_DEAD(hcd)) { + set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags); + hcd->state = old_state; + } + spin_unlock_irq(&hcd_root_hub_lock); + dev_dbg(&rhdev->dev, "bus %s fail, err %d\n", + "suspend", status); + } + return status; +} + +int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg) +{ + struct usb_hcd *hcd = bus_to_hcd(rhdev->bus); + int status; + int old_state = hcd->state; + + dev_dbg(&rhdev->dev, "usb %sresume\n", + (PMSG_IS_AUTO(msg) ? "auto-" : "")); + if (HCD_DEAD(hcd)) { + dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "resume"); + return 0; + } + + if (!PMSG_IS_AUTO(msg)) { + status = usb_phy_roothub_resume(hcd->self.sysdev, + hcd->phy_roothub); + if (status) + return status; + } + + if (!hcd->driver->bus_resume) + return -ENOENT; + if (HCD_RH_RUNNING(hcd)) + return 0; + + hcd->state = HC_STATE_RESUMING; + status = hcd->driver->bus_resume(hcd); + clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags); + if (status == 0) + status = usb_phy_roothub_calibrate(hcd->phy_roothub); + + if (status == 0) { + struct usb_device *udev; + int port1; + + spin_lock_irq(&hcd_root_hub_lock); + if (!HCD_DEAD(hcd)) { + usb_set_device_state(rhdev, rhdev->actconfig + ? USB_STATE_CONFIGURED + : USB_STATE_ADDRESS); + set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags); + hcd->state = HC_STATE_RUNNING; + } + spin_unlock_irq(&hcd_root_hub_lock); + + /* + * Check whether any of the enabled ports on the root hub are + * unsuspended. If they are then a TRSMRCY delay is needed + * (this is what the USB-2 spec calls a "global resume"). + * Otherwise we can skip the delay. + */ + usb_hub_for_each_child(rhdev, port1, udev) { + if (udev->state != USB_STATE_NOTATTACHED && + !udev->port_is_suspended) { + usleep_range(10000, 11000); /* TRSMRCY */ + break; + } + } + } else { + hcd->state = old_state; + usb_phy_roothub_suspend(hcd->self.sysdev, hcd->phy_roothub); + dev_dbg(&rhdev->dev, "bus %s fail, err %d\n", + "resume", status); + if (status != -ESHUTDOWN) + usb_hc_died(hcd); + } + return status; +} + +/* Workqueue routine for root-hub remote wakeup */ +static void hcd_resume_work(struct work_struct *work) +{ + struct usb_hcd *hcd = container_of(work, struct usb_hcd, wakeup_work); + struct usb_device *udev = hcd->self.root_hub; + + usb_remote_wakeup(udev); +} + +/** + * usb_hcd_resume_root_hub - called by HCD to resume its root hub + * @hcd: host controller for this root hub + * + * The USB host controller calls this function when its root hub is + * suspended (with the remote wakeup feature enabled) and a remote + * wakeup request is received. The routine submits a workqueue request + * to resume the root hub (that is, manage its downstream ports again). + */ +void usb_hcd_resume_root_hub (struct usb_hcd *hcd) +{ + unsigned long flags; + + spin_lock_irqsave (&hcd_root_hub_lock, flags); + if (hcd->rh_registered) { + pm_wakeup_event(&hcd->self.root_hub->dev, 0); + set_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags); + queue_work(pm_wq, &hcd->wakeup_work); + } + spin_unlock_irqrestore (&hcd_root_hub_lock, flags); +} +EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub); + +#endif /* CONFIG_PM */ + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_USB_OTG + +/** + * usb_bus_start_enum - start immediate enumeration (for OTG) + * @bus: the bus (must use hcd framework) + * @port_num: 1-based number of port; usually bus->otg_port + * Context: atomic + * + * Starts enumeration, with an immediate reset followed later by + * hub_wq identifying and possibly configuring the device. + * This is needed by OTG controller drivers, where it helps meet + * HNP protocol timing requirements for starting a port reset. + * + * Return: 0 if successful. + */ +int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num) +{ + struct usb_hcd *hcd; + int status = -EOPNOTSUPP; + + /* NOTE: since HNP can't start by grabbing the bus's address0_sem, + * boards with root hubs hooked up to internal devices (instead of + * just the OTG port) may need more attention to resetting... + */ + hcd = bus_to_hcd(bus); + if (port_num && hcd->driver->start_port_reset) + status = hcd->driver->start_port_reset(hcd, port_num); + + /* allocate hub_wq shortly after (first) root port reset finishes; + * it may issue others, until at least 50 msecs have passed. + */ + if (status == 0) + mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(10)); + return status; +} +EXPORT_SYMBOL_GPL(usb_bus_start_enum); + +#endif + +/*-------------------------------------------------------------------------*/ + +/** + * usb_hcd_irq - hook IRQs to HCD framework (bus glue) + * @irq: the IRQ being raised + * @__hcd: pointer to the HCD whose IRQ is being signaled + * + * If the controller isn't HALTed, calls the driver's irq handler. + * Checks whether the controller is now dead. + * + * Return: %IRQ_HANDLED if the IRQ was handled. %IRQ_NONE otherwise. + */ +irqreturn_t usb_hcd_irq (int irq, void *__hcd) +{ + struct usb_hcd *hcd = __hcd; + irqreturn_t rc; + + if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd))) + rc = IRQ_NONE; + else if (hcd->driver->irq(hcd) == IRQ_NONE) + rc = IRQ_NONE; + else + rc = IRQ_HANDLED; + + return rc; +} +EXPORT_SYMBOL_GPL(usb_hcd_irq); + +/*-------------------------------------------------------------------------*/ + +/* Workqueue routine for when the root-hub has died. */ +static void hcd_died_work(struct work_struct *work) +{ + struct usb_hcd *hcd = container_of(work, struct usb_hcd, died_work); + static char *env[] = { + "ERROR=DEAD", + NULL + }; + + /* Notify user space that the host controller has died */ + kobject_uevent_env(&hcd->self.root_hub->dev.kobj, KOBJ_OFFLINE, env); +} + +/** + * usb_hc_died - report abnormal shutdown of a host controller (bus glue) + * @hcd: pointer to the HCD representing the controller + * + * This is called by bus glue to report a USB host controller that died + * while operations may still have been pending. It's called automatically + * by the PCI glue, so only glue for non-PCI busses should need to call it. + * + * Only call this function with the primary HCD. + */ +void usb_hc_died (struct usb_hcd *hcd) +{ + unsigned long flags; + + dev_err (hcd->self.controller, "HC died; cleaning up\n"); + + spin_lock_irqsave (&hcd_root_hub_lock, flags); + clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags); + set_bit(HCD_FLAG_DEAD, &hcd->flags); + if (hcd->rh_registered) { + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + + /* make hub_wq clean up old urbs and devices */ + usb_set_device_state (hcd->self.root_hub, + USB_STATE_NOTATTACHED); + usb_kick_hub_wq(hcd->self.root_hub); + } + if (usb_hcd_is_primary_hcd(hcd) && hcd->shared_hcd) { + hcd = hcd->shared_hcd; + clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags); + set_bit(HCD_FLAG_DEAD, &hcd->flags); + if (hcd->rh_registered) { + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + + /* make hub_wq clean up old urbs and devices */ + usb_set_device_state(hcd->self.root_hub, + USB_STATE_NOTATTACHED); + usb_kick_hub_wq(hcd->self.root_hub); + } + } + + /* Handle the case where this function gets called with a shared HCD */ + if (usb_hcd_is_primary_hcd(hcd)) + schedule_work(&hcd->died_work); + else + schedule_work(&hcd->primary_hcd->died_work); + + spin_unlock_irqrestore (&hcd_root_hub_lock, flags); + /* Make sure that the other roothub is also deallocated. */ +} +EXPORT_SYMBOL_GPL (usb_hc_died); + +/*-------------------------------------------------------------------------*/ + +static void init_giveback_urb_bh(struct giveback_urb_bh *bh) +{ + + spin_lock_init(&bh->lock); + INIT_LIST_HEAD(&bh->head); + tasklet_setup(&bh->bh, usb_giveback_urb_bh); +} + +struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver, + struct device *sysdev, struct device *dev, const char *bus_name, + struct usb_hcd *primary_hcd) +{ + struct usb_hcd *hcd; + + hcd = kzalloc(sizeof(*hcd) + driver->hcd_priv_size, GFP_KERNEL); + if (!hcd) + return NULL; + if (primary_hcd == NULL) { + hcd->address0_mutex = kmalloc(sizeof(*hcd->address0_mutex), + GFP_KERNEL); + if (!hcd->address0_mutex) { + kfree(hcd); + dev_dbg(dev, "hcd address0 mutex alloc failed\n"); + return NULL; + } + mutex_init(hcd->address0_mutex); + hcd->bandwidth_mutex = kmalloc(sizeof(*hcd->bandwidth_mutex), + GFP_KERNEL); + if (!hcd->bandwidth_mutex) { + kfree(hcd->address0_mutex); + kfree(hcd); + dev_dbg(dev, "hcd bandwidth mutex alloc failed\n"); + return NULL; + } + mutex_init(hcd->bandwidth_mutex); + dev_set_drvdata(dev, hcd); + } else { + mutex_lock(&usb_port_peer_mutex); + hcd->address0_mutex = primary_hcd->address0_mutex; + hcd->bandwidth_mutex = primary_hcd->bandwidth_mutex; + hcd->primary_hcd = primary_hcd; + primary_hcd->primary_hcd = primary_hcd; + hcd->shared_hcd = primary_hcd; + primary_hcd->shared_hcd = hcd; + mutex_unlock(&usb_port_peer_mutex); + } + + kref_init(&hcd->kref); + + usb_bus_init(&hcd->self); + hcd->self.controller = dev; + hcd->self.sysdev = sysdev; + hcd->self.bus_name = bus_name; + + timer_setup(&hcd->rh_timer, rh_timer_func, 0); +#ifdef CONFIG_PM + INIT_WORK(&hcd->wakeup_work, hcd_resume_work); +#endif + + INIT_WORK(&hcd->died_work, hcd_died_work); + + hcd->driver = driver; + hcd->speed = driver->flags & HCD_MASK; + hcd->product_desc = (driver->product_desc) ? driver->product_desc : + "USB Host Controller"; + return hcd; +} +EXPORT_SYMBOL_GPL(__usb_create_hcd); + +/** + * usb_create_shared_hcd - create and initialize an HCD structure + * @driver: HC driver that will use this hcd + * @dev: device for this HC, stored in hcd->self.controller + * @bus_name: value to store in hcd->self.bus_name + * @primary_hcd: a pointer to the usb_hcd structure that is sharing the + * PCI device. Only allocate certain resources for the primary HCD + * + * Context: task context, might sleep. + * + * Allocate a struct usb_hcd, with extra space at the end for the + * HC driver's private data. Initialize the generic members of the + * hcd structure. + * + * Return: On success, a pointer to the created and initialized HCD structure. + * On failure (e.g. if memory is unavailable), %NULL. + */ +struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver, + struct device *dev, const char *bus_name, + struct usb_hcd *primary_hcd) +{ + return __usb_create_hcd(driver, dev, dev, bus_name, primary_hcd); +} +EXPORT_SYMBOL_GPL(usb_create_shared_hcd); + +/** + * usb_create_hcd - create and initialize an HCD structure + * @driver: HC driver that will use this hcd + * @dev: device for this HC, stored in hcd->self.controller + * @bus_name: value to store in hcd->self.bus_name + * + * Context: task context, might sleep. + * + * Allocate a struct usb_hcd, with extra space at the end for the + * HC driver's private data. Initialize the generic members of the + * hcd structure. + * + * Return: On success, a pointer to the created and initialized HCD + * structure. On failure (e.g. if memory is unavailable), %NULL. + */ +struct usb_hcd *usb_create_hcd(const struct hc_driver *driver, + struct device *dev, const char *bus_name) +{ + return __usb_create_hcd(driver, dev, dev, bus_name, NULL); +} +EXPORT_SYMBOL_GPL(usb_create_hcd); + +/* + * Roothubs that share one PCI device must also share the bandwidth mutex. + * Don't deallocate the bandwidth_mutex until the last shared usb_hcd is + * deallocated. + * + * Make sure to deallocate the bandwidth_mutex only when the last HCD is + * freed. When hcd_release() is called for either hcd in a peer set, + * invalidate the peer's ->shared_hcd and ->primary_hcd pointers. + */ +static void hcd_release(struct kref *kref) +{ + struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref); + + mutex_lock(&usb_port_peer_mutex); + if (hcd->shared_hcd) { + struct usb_hcd *peer = hcd->shared_hcd; + + peer->shared_hcd = NULL; + peer->primary_hcd = NULL; + } else { + kfree(hcd->address0_mutex); + kfree(hcd->bandwidth_mutex); + } + mutex_unlock(&usb_port_peer_mutex); + kfree(hcd); +} + +struct usb_hcd *usb_get_hcd (struct usb_hcd *hcd) +{ + if (hcd) + kref_get (&hcd->kref); + return hcd; +} +EXPORT_SYMBOL_GPL(usb_get_hcd); + +void usb_put_hcd (struct usb_hcd *hcd) +{ + if (hcd) + kref_put (&hcd->kref, hcd_release); +} +EXPORT_SYMBOL_GPL(usb_put_hcd); + +int usb_hcd_is_primary_hcd(struct usb_hcd *hcd) +{ + if (!hcd->primary_hcd) + return 1; + return hcd == hcd->primary_hcd; +} +EXPORT_SYMBOL_GPL(usb_hcd_is_primary_hcd); + +int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1) +{ + if (!hcd->driver->find_raw_port_number) + return port1; + + return hcd->driver->find_raw_port_number(hcd, port1); +} + +static int usb_hcd_request_irqs(struct usb_hcd *hcd, + unsigned int irqnum, unsigned long irqflags) +{ + int retval; + + if (hcd->driver->irq) { + + snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d", + hcd->driver->description, hcd->self.busnum); + retval = request_irq(irqnum, &usb_hcd_irq, irqflags, + hcd->irq_descr, hcd); + if (retval != 0) { + dev_err(hcd->self.controller, + "request interrupt %d failed\n", + irqnum); + return retval; + } + hcd->irq = irqnum; + dev_info(hcd->self.controller, "irq %d, %s 0x%08llx\n", irqnum, + (hcd->driver->flags & HCD_MEMORY) ? + "io mem" : "io port", + (unsigned long long)hcd->rsrc_start); + } else { + hcd->irq = 0; + if (hcd->rsrc_start) + dev_info(hcd->self.controller, "%s 0x%08llx\n", + (hcd->driver->flags & HCD_MEMORY) ? + "io mem" : "io port", + (unsigned long long)hcd->rsrc_start); + } + return 0; +} + +/* + * Before we free this root hub, flush in-flight peering attempts + * and disable peer lookups + */ +static void usb_put_invalidate_rhdev(struct usb_hcd *hcd) +{ + struct usb_device *rhdev; + + mutex_lock(&usb_port_peer_mutex); + rhdev = hcd->self.root_hub; + hcd->self.root_hub = NULL; + mutex_unlock(&usb_port_peer_mutex); + usb_put_dev(rhdev); +} + +/** + * usb_stop_hcd - Halt the HCD + * @hcd: the usb_hcd that has to be halted + * + * Stop the root-hub polling timer and invoke the HCD's ->stop callback. + */ +static void usb_stop_hcd(struct usb_hcd *hcd) +{ + hcd->rh_pollable = 0; + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + del_timer_sync(&hcd->rh_timer); + + hcd->driver->stop(hcd); + hcd->state = HC_STATE_HALT; + + /* In case the HCD restarted the timer, stop it again. */ + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + del_timer_sync(&hcd->rh_timer); +} + +/** + * usb_add_hcd - finish generic HCD structure initialization and register + * @hcd: the usb_hcd structure to initialize + * @irqnum: Interrupt line to allocate + * @irqflags: Interrupt type flags + * + * Finish the remaining parts of generic HCD initialization: allocate the + * buffers of consistent memory, register the bus, request the IRQ line, + * and call the driver's reset() and start() routines. + */ +int usb_add_hcd(struct usb_hcd *hcd, + unsigned int irqnum, unsigned long irqflags) +{ + int retval; + struct usb_device *rhdev; + struct usb_hcd *shared_hcd; + + if (!hcd->skip_phy_initialization && usb_hcd_is_primary_hcd(hcd)) { + hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev); + if (IS_ERR(hcd->phy_roothub)) + return PTR_ERR(hcd->phy_roothub); + + retval = usb_phy_roothub_init(hcd->phy_roothub); + if (retval) + return retval; + + retval = usb_phy_roothub_set_mode(hcd->phy_roothub, + PHY_MODE_USB_HOST_SS); + if (retval) + retval = usb_phy_roothub_set_mode(hcd->phy_roothub, + PHY_MODE_USB_HOST); + if (retval) + goto err_usb_phy_roothub_power_on; + + retval = usb_phy_roothub_power_on(hcd->phy_roothub); + if (retval) + goto err_usb_phy_roothub_power_on; + } + + dev_info(hcd->self.controller, "%s\n", hcd->product_desc); + + switch (authorized_default) { + case USB_AUTHORIZE_NONE: + hcd->dev_policy = USB_DEVICE_AUTHORIZE_NONE; + break; + + case USB_AUTHORIZE_ALL: + hcd->dev_policy = USB_DEVICE_AUTHORIZE_ALL; + break; + + case USB_AUTHORIZE_INTERNAL: + hcd->dev_policy = USB_DEVICE_AUTHORIZE_INTERNAL; + break; + + case USB_AUTHORIZE_WIRED: + default: + hcd->dev_policy = hcd->wireless ? + USB_DEVICE_AUTHORIZE_NONE : USB_DEVICE_AUTHORIZE_ALL; + break; + } + + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + + /* per default all interfaces are authorized */ + set_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags); + + /* HC is in reset state, but accessible. Now do the one-time init, + * bottom up so that hcds can customize the root hubs before hub_wq + * starts talking to them. (Note, bus id is assigned early too.) + */ + retval = hcd_buffer_create(hcd); + if (retval != 0) { + dev_dbg(hcd->self.sysdev, "pool alloc failed\n"); + goto err_create_buf; + } + + retval = usb_register_bus(&hcd->self); + if (retval < 0) + goto err_register_bus; + + rhdev = usb_alloc_dev(NULL, &hcd->self, 0); + if (rhdev == NULL) { + dev_err(hcd->self.sysdev, "unable to allocate root hub\n"); + retval = -ENOMEM; + goto err_allocate_root_hub; + } + mutex_lock(&usb_port_peer_mutex); + hcd->self.root_hub = rhdev; + mutex_unlock(&usb_port_peer_mutex); + + rhdev->rx_lanes = 1; + rhdev->tx_lanes = 1; + rhdev->ssp_rate = USB_SSP_GEN_UNKNOWN; + + switch (hcd->speed) { + case HCD_USB11: + rhdev->speed = USB_SPEED_FULL; + break; + case HCD_USB2: + rhdev->speed = USB_SPEED_HIGH; + break; + case HCD_USB25: + rhdev->speed = USB_SPEED_WIRELESS; + break; + case HCD_USB3: + rhdev->speed = USB_SPEED_SUPER; + break; + case HCD_USB32: + rhdev->rx_lanes = 2; + rhdev->tx_lanes = 2; + rhdev->ssp_rate = USB_SSP_GEN_2x2; + rhdev->speed = USB_SPEED_SUPER_PLUS; + break; + case HCD_USB31: + rhdev->ssp_rate = USB_SSP_GEN_2x1; + rhdev->speed = USB_SPEED_SUPER_PLUS; + break; + default: + retval = -EINVAL; + goto err_set_rh_speed; + } + + /* wakeup flag init defaults to "everything works" for root hubs, + * but drivers can override it in reset() if needed, along with + * recording the overall controller's system wakeup capability. + */ + device_set_wakeup_capable(&rhdev->dev, 1); + + /* HCD_FLAG_RH_RUNNING doesn't matter until the root hub is + * registered. But since the controller can die at any time, + * let's initialize the flag before touching the hardware. + */ + set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags); + + /* "reset" is misnamed; its role is now one-time init. the controller + * should already have been reset (and boot firmware kicked off etc). + */ + if (hcd->driver->reset) { + retval = hcd->driver->reset(hcd); + if (retval < 0) { + dev_err(hcd->self.controller, "can't setup: %d\n", + retval); + goto err_hcd_driver_setup; + } + } + hcd->rh_pollable = 1; + + retval = usb_phy_roothub_calibrate(hcd->phy_roothub); + if (retval) + goto err_hcd_driver_setup; + + /* NOTE: root hub and controller capabilities may not be the same */ + if (device_can_wakeup(hcd->self.controller) + && device_can_wakeup(&hcd->self.root_hub->dev)) + dev_dbg(hcd->self.controller, "supports USB remote wakeup\n"); + + /* initialize tasklets */ + init_giveback_urb_bh(&hcd->high_prio_bh); + hcd->high_prio_bh.high_prio = true; + init_giveback_urb_bh(&hcd->low_prio_bh); + + /* enable irqs just before we start the controller, + * if the BIOS provides legacy PCI irqs. + */ + if (usb_hcd_is_primary_hcd(hcd) && irqnum) { + retval = usb_hcd_request_irqs(hcd, irqnum, irqflags); + if (retval) + goto err_request_irq; + } + + hcd->state = HC_STATE_RUNNING; + retval = hcd->driver->start(hcd); + if (retval < 0) { + dev_err(hcd->self.controller, "startup error %d\n", retval); + goto err_hcd_driver_start; + } + + /* starting here, usbcore will pay attention to the shared HCD roothub */ + shared_hcd = hcd->shared_hcd; + if (!usb_hcd_is_primary_hcd(hcd) && shared_hcd && HCD_DEFER_RH_REGISTER(shared_hcd)) { + retval = register_root_hub(shared_hcd); + if (retval != 0) + goto err_register_root_hub; + + if (shared_hcd->uses_new_polling && HCD_POLL_RH(shared_hcd)) + usb_hcd_poll_rh_status(shared_hcd); + } + + /* starting here, usbcore will pay attention to this root hub */ + if (!HCD_DEFER_RH_REGISTER(hcd)) { + retval = register_root_hub(hcd); + if (retval != 0) + goto err_register_root_hub; + + if (hcd->uses_new_polling && HCD_POLL_RH(hcd)) + usb_hcd_poll_rh_status(hcd); + } + + return retval; + +err_register_root_hub: + usb_stop_hcd(hcd); +err_hcd_driver_start: + if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0) + free_irq(irqnum, hcd); +err_request_irq: +err_hcd_driver_setup: +err_set_rh_speed: + usb_put_invalidate_rhdev(hcd); +err_allocate_root_hub: + usb_deregister_bus(&hcd->self); +err_register_bus: + hcd_buffer_destroy(hcd); +err_create_buf: + usb_phy_roothub_power_off(hcd->phy_roothub); +err_usb_phy_roothub_power_on: + usb_phy_roothub_exit(hcd->phy_roothub); + + return retval; +} +EXPORT_SYMBOL_GPL(usb_add_hcd); + +/** + * usb_remove_hcd - shutdown processing for generic HCDs + * @hcd: the usb_hcd structure to remove + * + * Context: task context, might sleep. + * + * Disconnects the root hub, then reverses the effects of usb_add_hcd(), + * invoking the HCD's stop() method. + */ +void usb_remove_hcd(struct usb_hcd *hcd) +{ + struct usb_device *rhdev; + bool rh_registered; + + if (!hcd) { + pr_debug("%s: hcd is NULL\n", __func__); + return; + } + rhdev = hcd->self.root_hub; + + dev_info(hcd->self.controller, "remove, state %x\n", hcd->state); + + usb_get_dev(rhdev); + clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags); + if (HC_IS_RUNNING (hcd->state)) + hcd->state = HC_STATE_QUIESCING; + + dev_dbg(hcd->self.controller, "roothub graceful disconnect\n"); + spin_lock_irq (&hcd_root_hub_lock); + rh_registered = hcd->rh_registered; + hcd->rh_registered = 0; + spin_unlock_irq (&hcd_root_hub_lock); + +#ifdef CONFIG_PM + cancel_work_sync(&hcd->wakeup_work); +#endif + cancel_work_sync(&hcd->died_work); + + mutex_lock(&usb_bus_idr_lock); + if (rh_registered) + usb_disconnect(&rhdev); /* Sets rhdev to NULL */ + mutex_unlock(&usb_bus_idr_lock); + + /* + * tasklet_kill() isn't needed here because: + * - driver's disconnect() called from usb_disconnect() should + * make sure its URBs are completed during the disconnect() + * callback + * + * - it is too late to run complete() here since driver may have + * been removed already now + */ + + /* Prevent any more root-hub status calls from the timer. + * The HCD might still restart the timer (if a port status change + * interrupt occurs), but usb_hcd_poll_rh_status() won't invoke + * the hub_status_data() callback. + */ + usb_stop_hcd(hcd); + + if (usb_hcd_is_primary_hcd(hcd)) { + if (hcd->irq > 0) + free_irq(hcd->irq, hcd); + } + + usb_deregister_bus(&hcd->self); + hcd_buffer_destroy(hcd); + + usb_phy_roothub_power_off(hcd->phy_roothub); + usb_phy_roothub_exit(hcd->phy_roothub); + + usb_put_invalidate_rhdev(hcd); + hcd->flags = 0; +} +EXPORT_SYMBOL_GPL(usb_remove_hcd); + +void +usb_hcd_platform_shutdown(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + + /* No need for pm_runtime_put(), we're shutting down */ + pm_runtime_get_sync(&dev->dev); + + if (hcd->driver->shutdown) + hcd->driver->shutdown(hcd); +} +EXPORT_SYMBOL_GPL(usb_hcd_platform_shutdown); + +int usb_hcd_setup_local_mem(struct usb_hcd *hcd, phys_addr_t phys_addr, + dma_addr_t dma, size_t size) +{ + int err; + void *local_mem; + + hcd->localmem_pool = devm_gen_pool_create(hcd->self.sysdev, 4, + dev_to_node(hcd->self.sysdev), + dev_name(hcd->self.sysdev)); + if (IS_ERR(hcd->localmem_pool)) + return PTR_ERR(hcd->localmem_pool); + + /* + * if a physical SRAM address was passed, map it, otherwise + * allocate system memory as a buffer. + */ + if (phys_addr) + local_mem = devm_memremap(hcd->self.sysdev, phys_addr, + size, MEMREMAP_WC); + else + local_mem = dmam_alloc_attrs(hcd->self.sysdev, size, &dma, + GFP_KERNEL, + DMA_ATTR_WRITE_COMBINE); + + if (IS_ERR_OR_NULL(local_mem)) { + if (!local_mem) + return -ENOMEM; + + return PTR_ERR(local_mem); + } + + /* + * Here we pass a dma_addr_t but the arg type is a phys_addr_t. + * It's not backed by system memory and thus there's no kernel mapping + * for it. + */ + err = gen_pool_add_virt(hcd->localmem_pool, (unsigned long)local_mem, + dma, size, dev_to_node(hcd->self.sysdev)); + if (err < 0) { + dev_err(hcd->self.sysdev, "gen_pool_add_virt failed with %d\n", + err); + return err; + } + + return 0; +} +EXPORT_SYMBOL_GPL(usb_hcd_setup_local_mem); + +/*-------------------------------------------------------------------------*/ + +#if IS_ENABLED(CONFIG_USB_MON) + +const struct usb_mon_operations *mon_ops; + +/* + * The registration is unlocked. + * We do it this way because we do not want to lock in hot paths. + * + * Notice that the code is minimally error-proof. Because usbmon needs + * symbols from usbcore, usbcore gets referenced and cannot be unloaded first. + */ + +int usb_mon_register(const struct usb_mon_operations *ops) +{ + + if (mon_ops) + return -EBUSY; + + mon_ops = ops; + mb(); + return 0; +} +EXPORT_SYMBOL_GPL (usb_mon_register); + +void usb_mon_deregister (void) +{ + + if (mon_ops == NULL) { + printk(KERN_ERR "USB: monitor was not registered\n"); + return; + } + mon_ops = NULL; + mb(); +} +EXPORT_SYMBOL_GPL (usb_mon_deregister); + +#endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */ diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c new file mode 100644 index 000000000..81c8f564c --- /dev/null +++ b/drivers/usb/core/hub.c @@ -0,0 +1,6362 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * USB hub driver. + * + * (C) Copyright 1999 Linus Torvalds + * (C) Copyright 1999 Johannes Erdfelt + * (C) Copyright 1999 Gregory P. Smith + * (C) Copyright 2001 Brad Hards (bhards@bigpond.net.au) + * + * Released under the GPLv2 only. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/completion.h> +#include <linux/sched/mm.h> +#include <linux/list.h> +#include <linux/slab.h> +#include <linux/kcov.h> +#include <linux/ioctl.h> +#include <linux/usb.h> +#include <linux/usbdevice_fs.h> +#include <linux/usb/hcd.h> +#include <linux/usb/onboard_hub.h> +#include <linux/usb/otg.h> +#include <linux/usb/quirks.h> +#include <linux/workqueue.h> +#include <linux/mutex.h> +#include <linux/random.h> +#include <linux/pm_qos.h> +#include <linux/kobject.h> + +#include <linux/bitfield.h> +#include <linux/uaccess.h> +#include <asm/byteorder.h> + +#include "hub.h" +#include "otg_productlist.h" + +#define USB_VENDOR_GENESYS_LOGIC 0x05e3 +#define USB_VENDOR_SMSC 0x0424 +#define USB_PRODUCT_USB5534B 0x5534 +#define USB_VENDOR_CYPRESS 0x04b4 +#define USB_PRODUCT_CY7C65632 0x6570 +#define USB_VENDOR_TEXAS_INSTRUMENTS 0x0451 +#define USB_PRODUCT_TUSB8041_USB3 0x8140 +#define USB_PRODUCT_TUSB8041_USB2 0x8142 +#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01 +#define HUB_QUIRK_DISABLE_AUTOSUSPEND 0x02 + +#define USB_TP_TRANSMISSION_DELAY 40 /* ns */ +#define USB_TP_TRANSMISSION_DELAY_MAX 65535 /* ns */ +#define USB_PING_RESPONSE_TIME 400 /* ns */ + +/* Protect struct usb_device->state and ->children members + * Note: Both are also protected by ->dev.sem, except that ->state can + * change to USB_STATE_NOTATTACHED even when the semaphore isn't held. */ +static DEFINE_SPINLOCK(device_state_lock); + +/* workqueue to process hub events */ +static struct workqueue_struct *hub_wq; +static void hub_event(struct work_struct *work); + +/* synchronize hub-port add/remove and peering operations */ +DEFINE_MUTEX(usb_port_peer_mutex); + +/* cycle leds on hubs that aren't blinking for attention */ +static bool blinkenlights; +module_param(blinkenlights, bool, S_IRUGO); +MODULE_PARM_DESC(blinkenlights, "true to cycle leds on hubs"); + +/* + * Device SATA8000 FW1.0 from DATAST0R Technology Corp requires about + * 10 seconds to send reply for the initial 64-byte descriptor request. + */ +/* define initial 64-byte descriptor request timeout in milliseconds */ +static int initial_descriptor_timeout = USB_CTRL_GET_TIMEOUT; +module_param(initial_descriptor_timeout, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(initial_descriptor_timeout, + "initial 64-byte descriptor request timeout in milliseconds " + "(default 5000 - 5.0 seconds)"); + +/* + * As of 2.6.10 we introduce a new USB device initialization scheme which + * closely resembles the way Windows works. Hopefully it will be compatible + * with a wider range of devices than the old scheme. However some previously + * working devices may start giving rise to "device not accepting address" + * errors; if that happens the user can try the old scheme by adjusting the + * following module parameters. + * + * For maximum flexibility there are two boolean parameters to control the + * hub driver's behavior. On the first initialization attempt, if the + * "old_scheme_first" parameter is set then the old scheme will be used, + * otherwise the new scheme is used. If that fails and "use_both_schemes" + * is set, then the driver will make another attempt, using the other scheme. + */ +static bool old_scheme_first; +module_param(old_scheme_first, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(old_scheme_first, + "start with the old device initialization scheme"); + +static bool use_both_schemes = true; +module_param(use_both_schemes, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(use_both_schemes, + "try the other device initialization scheme if the " + "first one fails"); + +/* Mutual exclusion for EHCI CF initialization. This interferes with + * port reset on some companion controllers. + */ +DECLARE_RWSEM(ehci_cf_port_reset_rwsem); +EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem); + +#define HUB_DEBOUNCE_TIMEOUT 2000 +#define HUB_DEBOUNCE_STEP 25 +#define HUB_DEBOUNCE_STABLE 100 + +static void hub_release(struct kref *kref); +static int usb_reset_and_verify_device(struct usb_device *udev); +static int hub_port_disable(struct usb_hub *hub, int port1, int set_state); +static bool hub_port_warm_reset_required(struct usb_hub *hub, int port1, + u16 portstatus); + +static inline char *portspeed(struct usb_hub *hub, int portstatus) +{ + if (hub_is_superspeedplus(hub->hdev)) + return "10.0 Gb/s"; + if (hub_is_superspeed(hub->hdev)) + return "5.0 Gb/s"; + if (portstatus & USB_PORT_STAT_HIGH_SPEED) + return "480 Mb/s"; + else if (portstatus & USB_PORT_STAT_LOW_SPEED) + return "1.5 Mb/s"; + else + return "12 Mb/s"; +} + +/* Note that hdev or one of its children must be locked! */ +struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev) +{ + if (!hdev || !hdev->actconfig || !hdev->maxchild) + return NULL; + return usb_get_intfdata(hdev->actconfig->interface[0]); +} + +int usb_device_supports_lpm(struct usb_device *udev) +{ + /* Some devices have trouble with LPM */ + if (udev->quirks & USB_QUIRK_NO_LPM) + return 0; + + /* Skip if the device BOS descriptor couldn't be read */ + if (!udev->bos) + return 0; + + /* USB 2.1 (and greater) devices indicate LPM support through + * their USB 2.0 Extended Capabilities BOS descriptor. + */ + if (udev->speed == USB_SPEED_HIGH || udev->speed == USB_SPEED_FULL) { + if (udev->bos->ext_cap && + (USB_LPM_SUPPORT & + le32_to_cpu(udev->bos->ext_cap->bmAttributes))) + return 1; + return 0; + } + + /* + * According to the USB 3.0 spec, all USB 3.0 devices must support LPM. + * However, there are some that don't, and they set the U1/U2 exit + * latencies to zero. + */ + if (!udev->bos->ss_cap) { + dev_info(&udev->dev, "No LPM exit latency info found, disabling LPM.\n"); + return 0; + } + + if (udev->bos->ss_cap->bU1devExitLat == 0 && + udev->bos->ss_cap->bU2DevExitLat == 0) { + if (udev->parent) + dev_info(&udev->dev, "LPM exit latency is zeroed, disabling LPM.\n"); + else + dev_info(&udev->dev, "We don't know the algorithms for LPM for this host, disabling LPM.\n"); + return 0; + } + + if (!udev->parent || udev->parent->lpm_capable) + return 1; + return 0; +} + +/* + * Set the Maximum Exit Latency (MEL) for the host to wakup up the path from + * U1/U2, send a PING to the device and receive a PING_RESPONSE. + * See USB 3.1 section C.1.5.2 + */ +static void usb_set_lpm_mel(struct usb_device *udev, + struct usb3_lpm_parameters *udev_lpm_params, + unsigned int udev_exit_latency, + struct usb_hub *hub, + struct usb3_lpm_parameters *hub_lpm_params, + unsigned int hub_exit_latency) +{ + unsigned int total_mel; + + /* + * tMEL1. time to transition path from host to device into U0. + * MEL for parent already contains the delay up to parent, so only add + * the exit latency for the last link (pick the slower exit latency), + * and the hub header decode latency. See USB 3.1 section C 2.2.1 + * Store MEL in nanoseconds + */ + total_mel = hub_lpm_params->mel + + max(udev_exit_latency, hub_exit_latency) * 1000 + + hub->descriptor->u.ss.bHubHdrDecLat * 100; + + /* + * tMEL2. Time to submit PING packet. Sum of tTPTransmissionDelay for + * each link + wHubDelay for each hub. Add only for last link. + * tMEL4, the time for PING_RESPONSE to traverse upstream is similar. + * Multiply by 2 to include it as well. + */ + total_mel += (__le16_to_cpu(hub->descriptor->u.ss.wHubDelay) + + USB_TP_TRANSMISSION_DELAY) * 2; + + /* + * tMEL3, tPingResponse. Time taken by device to generate PING_RESPONSE + * after receiving PING. Also add 2100ns as stated in USB 3.1 C 1.5.2.4 + * to cover the delay if the PING_RESPONSE is queued behind a Max Packet + * Size DP. + * Note these delays should be added only once for the entire path, so + * add them to the MEL of the device connected to the roothub. + */ + if (!hub->hdev->parent) + total_mel += USB_PING_RESPONSE_TIME + 2100; + + udev_lpm_params->mel = total_mel; +} + +/* + * Set the maximum Device to Host Exit Latency (PEL) for the device to initiate + * a transition from either U1 or U2. + */ +static void usb_set_lpm_pel(struct usb_device *udev, + struct usb3_lpm_parameters *udev_lpm_params, + unsigned int udev_exit_latency, + struct usb_hub *hub, + struct usb3_lpm_parameters *hub_lpm_params, + unsigned int hub_exit_latency, + unsigned int port_to_port_exit_latency) +{ + unsigned int first_link_pel; + unsigned int hub_pel; + + /* + * First, the device sends an LFPS to transition the link between the + * device and the parent hub into U0. The exit latency is the bigger of + * the device exit latency or the hub exit latency. + */ + if (udev_exit_latency > hub_exit_latency) + first_link_pel = udev_exit_latency * 1000; + else + first_link_pel = hub_exit_latency * 1000; + + /* + * When the hub starts to receive the LFPS, there is a slight delay for + * it to figure out that one of the ports is sending an LFPS. Then it + * will forward the LFPS to its upstream link. The exit latency is the + * delay, plus the PEL that we calculated for this hub. + */ + hub_pel = port_to_port_exit_latency * 1000 + hub_lpm_params->pel; + + /* + * According to figure C-7 in the USB 3.0 spec, the PEL for this device + * is the greater of the two exit latencies. + */ + if (first_link_pel > hub_pel) + udev_lpm_params->pel = first_link_pel; + else + udev_lpm_params->pel = hub_pel; +} + +/* + * Set the System Exit Latency (SEL) to indicate the total worst-case time from + * when a device initiates a transition to U0, until when it will receive the + * first packet from the host controller. + * + * Section C.1.5.1 describes the four components to this: + * - t1: device PEL + * - t2: time for the ERDY to make it from the device to the host. + * - t3: a host-specific delay to process the ERDY. + * - t4: time for the packet to make it from the host to the device. + * + * t3 is specific to both the xHCI host and the platform the host is integrated + * into. The Intel HW folks have said it's negligible, FIXME if a different + * vendor says otherwise. + */ +static void usb_set_lpm_sel(struct usb_device *udev, + struct usb3_lpm_parameters *udev_lpm_params) +{ + struct usb_device *parent; + unsigned int num_hubs; + unsigned int total_sel; + + /* t1 = device PEL */ + total_sel = udev_lpm_params->pel; + /* How many external hubs are in between the device & the root port. */ + for (parent = udev->parent, num_hubs = 0; parent->parent; + parent = parent->parent) + num_hubs++; + /* t2 = 2.1us + 250ns * (num_hubs - 1) */ + if (num_hubs > 0) + total_sel += 2100 + 250 * (num_hubs - 1); + + /* t4 = 250ns * num_hubs */ + total_sel += 250 * num_hubs; + + udev_lpm_params->sel = total_sel; +} + +static void usb_set_lpm_parameters(struct usb_device *udev) +{ + struct usb_hub *hub; + unsigned int port_to_port_delay; + unsigned int udev_u1_del; + unsigned int udev_u2_del; + unsigned int hub_u1_del; + unsigned int hub_u2_del; + + if (!udev->lpm_capable || udev->speed < USB_SPEED_SUPER) + return; + + /* Skip if the device BOS descriptor couldn't be read */ + if (!udev->bos) + return; + + hub = usb_hub_to_struct_hub(udev->parent); + /* It doesn't take time to transition the roothub into U0, since it + * doesn't have an upstream link. + */ + if (!hub) + return; + + udev_u1_del = udev->bos->ss_cap->bU1devExitLat; + udev_u2_del = le16_to_cpu(udev->bos->ss_cap->bU2DevExitLat); + hub_u1_del = udev->parent->bos->ss_cap->bU1devExitLat; + hub_u2_del = le16_to_cpu(udev->parent->bos->ss_cap->bU2DevExitLat); + + usb_set_lpm_mel(udev, &udev->u1_params, udev_u1_del, + hub, &udev->parent->u1_params, hub_u1_del); + + usb_set_lpm_mel(udev, &udev->u2_params, udev_u2_del, + hub, &udev->parent->u2_params, hub_u2_del); + + /* + * Appendix C, section C.2.2.2, says that there is a slight delay from + * when the parent hub notices the downstream port is trying to + * transition to U0 to when the hub initiates a U0 transition on its + * upstream port. The section says the delays are tPort2PortU1EL and + * tPort2PortU2EL, but it doesn't define what they are. + * + * The hub chapter, sections 10.4.2.4 and 10.4.2.5 seem to be talking + * about the same delays. Use the maximum delay calculations from those + * sections. For U1, it's tHubPort2PortExitLat, which is 1us max. For + * U2, it's tHubPort2PortExitLat + U2DevExitLat - U1DevExitLat. I + * assume the device exit latencies they are talking about are the hub + * exit latencies. + * + * What do we do if the U2 exit latency is less than the U1 exit + * latency? It's possible, although not likely... + */ + port_to_port_delay = 1; + + usb_set_lpm_pel(udev, &udev->u1_params, udev_u1_del, + hub, &udev->parent->u1_params, hub_u1_del, + port_to_port_delay); + + if (hub_u2_del > hub_u1_del) + port_to_port_delay = 1 + hub_u2_del - hub_u1_del; + else + port_to_port_delay = 1 + hub_u1_del; + + usb_set_lpm_pel(udev, &udev->u2_params, udev_u2_del, + hub, &udev->parent->u2_params, hub_u2_del, + port_to_port_delay); + + /* Now that we've got PEL, calculate SEL. */ + usb_set_lpm_sel(udev, &udev->u1_params); + usb_set_lpm_sel(udev, &udev->u2_params); +} + +/* USB 2.0 spec Section 11.24.4.5 */ +static int get_hub_descriptor(struct usb_device *hdev, + struct usb_hub_descriptor *desc) +{ + int i, ret, size; + unsigned dtype; + + if (hub_is_superspeed(hdev)) { + dtype = USB_DT_SS_HUB; + size = USB_DT_SS_HUB_SIZE; + } else { + dtype = USB_DT_HUB; + size = sizeof(struct usb_hub_descriptor); + } + + for (i = 0; i < 3; i++) { + ret = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0), + USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB, + dtype << 8, 0, desc, size, + USB_CTRL_GET_TIMEOUT); + if (hub_is_superspeed(hdev)) { + if (ret == size) + return ret; + } else if (ret >= USB_DT_HUB_NONVAR_SIZE + 2) { + /* Make sure we have the DeviceRemovable field. */ + size = USB_DT_HUB_NONVAR_SIZE + desc->bNbrPorts / 8 + 1; + if (ret < size) + return -EMSGSIZE; + return ret; + } + } + return -EINVAL; +} + +/* + * USB 2.0 spec Section 11.24.2.1 + */ +static int clear_hub_feature(struct usb_device *hdev, int feature) +{ + return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), + USB_REQ_CLEAR_FEATURE, USB_RT_HUB, feature, 0, NULL, 0, 1000); +} + +/* + * USB 2.0 spec Section 11.24.2.2 + */ +int usb_clear_port_feature(struct usb_device *hdev, int port1, int feature) +{ + return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), + USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature, port1, + NULL, 0, 1000); +} + +/* + * USB 2.0 spec Section 11.24.2.13 + */ +static int set_port_feature(struct usb_device *hdev, int port1, int feature) +{ + return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), + USB_REQ_SET_FEATURE, USB_RT_PORT, feature, port1, + NULL, 0, 1000); +} + +static char *to_led_name(int selector) +{ + switch (selector) { + case HUB_LED_AMBER: + return "amber"; + case HUB_LED_GREEN: + return "green"; + case HUB_LED_OFF: + return "off"; + case HUB_LED_AUTO: + return "auto"; + default: + return "??"; + } +} + +/* + * USB 2.0 spec Section 11.24.2.7.1.10 and table 11-7 + * for info about using port indicators + */ +static void set_port_led(struct usb_hub *hub, int port1, int selector) +{ + struct usb_port *port_dev = hub->ports[port1 - 1]; + int status; + + status = set_port_feature(hub->hdev, (selector << 8) | port1, + USB_PORT_FEAT_INDICATOR); + dev_dbg(&port_dev->dev, "indicator %s status %d\n", + to_led_name(selector), status); +} + +#define LED_CYCLE_PERIOD ((2*HZ)/3) + +static void led_work(struct work_struct *work) +{ + struct usb_hub *hub = + container_of(work, struct usb_hub, leds.work); + struct usb_device *hdev = hub->hdev; + unsigned i; + unsigned changed = 0; + int cursor = -1; + + if (hdev->state != USB_STATE_CONFIGURED || hub->quiescing) + return; + + for (i = 0; i < hdev->maxchild; i++) { + unsigned selector, mode; + + /* 30%-50% duty cycle */ + + switch (hub->indicator[i]) { + /* cycle marker */ + case INDICATOR_CYCLE: + cursor = i; + selector = HUB_LED_AUTO; + mode = INDICATOR_AUTO; + break; + /* blinking green = sw attention */ + case INDICATOR_GREEN_BLINK: + selector = HUB_LED_GREEN; + mode = INDICATOR_GREEN_BLINK_OFF; + break; + case INDICATOR_GREEN_BLINK_OFF: + selector = HUB_LED_OFF; + mode = INDICATOR_GREEN_BLINK; + break; + /* blinking amber = hw attention */ + case INDICATOR_AMBER_BLINK: + selector = HUB_LED_AMBER; + mode = INDICATOR_AMBER_BLINK_OFF; + break; + case INDICATOR_AMBER_BLINK_OFF: + selector = HUB_LED_OFF; + mode = INDICATOR_AMBER_BLINK; + break; + /* blink green/amber = reserved */ + case INDICATOR_ALT_BLINK: + selector = HUB_LED_GREEN; + mode = INDICATOR_ALT_BLINK_OFF; + break; + case INDICATOR_ALT_BLINK_OFF: + selector = HUB_LED_AMBER; + mode = INDICATOR_ALT_BLINK; + break; + default: + continue; + } + if (selector != HUB_LED_AUTO) + changed = 1; + set_port_led(hub, i + 1, selector); + hub->indicator[i] = mode; + } + if (!changed && blinkenlights) { + cursor++; + cursor %= hdev->maxchild; + set_port_led(hub, cursor + 1, HUB_LED_GREEN); + hub->indicator[cursor] = INDICATOR_CYCLE; + changed++; + } + if (changed) + queue_delayed_work(system_power_efficient_wq, + &hub->leds, LED_CYCLE_PERIOD); +} + +/* use a short timeout for hub/port status fetches */ +#define USB_STS_TIMEOUT 1000 +#define USB_STS_RETRIES 5 + +/* + * USB 2.0 spec Section 11.24.2.6 + */ +static int get_hub_status(struct usb_device *hdev, + struct usb_hub_status *data) +{ + int i, status = -ETIMEDOUT; + + for (i = 0; i < USB_STS_RETRIES && + (status == -ETIMEDOUT || status == -EPIPE); i++) { + status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0), + USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0, + data, sizeof(*data), USB_STS_TIMEOUT); + } + return status; +} + +/* + * USB 2.0 spec Section 11.24.2.7 + * USB 3.1 takes into use the wValue and wLength fields, spec Section 10.16.2.6 + */ +static int get_port_status(struct usb_device *hdev, int port1, + void *data, u16 value, u16 length) +{ + int i, status = -ETIMEDOUT; + + for (i = 0; i < USB_STS_RETRIES && + (status == -ETIMEDOUT || status == -EPIPE); i++) { + status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0), + USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, value, + port1, data, length, USB_STS_TIMEOUT); + } + return status; +} + +static int hub_ext_port_status(struct usb_hub *hub, int port1, int type, + u16 *status, u16 *change, u32 *ext_status) +{ + int ret; + int len = 4; + + if (type != HUB_PORT_STATUS) + len = 8; + + mutex_lock(&hub->status_mutex); + ret = get_port_status(hub->hdev, port1, &hub->status->port, type, len); + if (ret < len) { + if (ret != -ENODEV) + dev_err(hub->intfdev, + "%s failed (err = %d)\n", __func__, ret); + if (ret >= 0) + ret = -EIO; + } else { + *status = le16_to_cpu(hub->status->port.wPortStatus); + *change = le16_to_cpu(hub->status->port.wPortChange); + if (type != HUB_PORT_STATUS && ext_status) + *ext_status = le32_to_cpu( + hub->status->port.dwExtPortStatus); + ret = 0; + } + mutex_unlock(&hub->status_mutex); + return ret; +} + +int usb_hub_port_status(struct usb_hub *hub, int port1, + u16 *status, u16 *change) +{ + return hub_ext_port_status(hub, port1, HUB_PORT_STATUS, + status, change, NULL); +} + +static void hub_resubmit_irq_urb(struct usb_hub *hub) +{ + unsigned long flags; + int status; + + spin_lock_irqsave(&hub->irq_urb_lock, flags); + + if (hub->quiescing) { + spin_unlock_irqrestore(&hub->irq_urb_lock, flags); + return; + } + + status = usb_submit_urb(hub->urb, GFP_ATOMIC); + if (status && status != -ENODEV && status != -EPERM && + status != -ESHUTDOWN) { + dev_err(hub->intfdev, "resubmit --> %d\n", status); + mod_timer(&hub->irq_urb_retry, jiffies + HZ); + } + + spin_unlock_irqrestore(&hub->irq_urb_lock, flags); +} + +static void hub_retry_irq_urb(struct timer_list *t) +{ + struct usb_hub *hub = from_timer(hub, t, irq_urb_retry); + + hub_resubmit_irq_urb(hub); +} + + +static void kick_hub_wq(struct usb_hub *hub) +{ + struct usb_interface *intf; + + if (hub->disconnected || work_pending(&hub->events)) + return; + + /* + * Suppress autosuspend until the event is proceed. + * + * Be careful and make sure that the symmetric operation is + * always called. We are here only when there is no pending + * work for this hub. Therefore put the interface either when + * the new work is called or when it is canceled. + */ + intf = to_usb_interface(hub->intfdev); + usb_autopm_get_interface_no_resume(intf); + kref_get(&hub->kref); + + if (queue_work(hub_wq, &hub->events)) + return; + + /* the work has already been scheduled */ + usb_autopm_put_interface_async(intf); + kref_put(&hub->kref, hub_release); +} + +void usb_kick_hub_wq(struct usb_device *hdev) +{ + struct usb_hub *hub = usb_hub_to_struct_hub(hdev); + + if (hub) + kick_hub_wq(hub); +} + +/* + * Let the USB core know that a USB 3.0 device has sent a Function Wake Device + * Notification, which indicates it had initiated remote wakeup. + * + * USB 3.0 hubs do not report the port link state change from U3 to U0 when the + * device initiates resume, so the USB core will not receive notice of the + * resume through the normal hub interrupt URB. + */ +void usb_wakeup_notification(struct usb_device *hdev, + unsigned int portnum) +{ + struct usb_hub *hub; + struct usb_port *port_dev; + + if (!hdev) + return; + + hub = usb_hub_to_struct_hub(hdev); + if (hub) { + port_dev = hub->ports[portnum - 1]; + if (port_dev && port_dev->child) + pm_wakeup_event(&port_dev->child->dev, 0); + + set_bit(portnum, hub->wakeup_bits); + kick_hub_wq(hub); + } +} +EXPORT_SYMBOL_GPL(usb_wakeup_notification); + +/* completion function, fires on port status changes and various faults */ +static void hub_irq(struct urb *urb) +{ + struct usb_hub *hub = urb->context; + int status = urb->status; + unsigned i; + unsigned long bits; + + switch (status) { + case -ENOENT: /* synchronous unlink */ + case -ECONNRESET: /* async unlink */ + case -ESHUTDOWN: /* hardware going away */ + return; + + default: /* presumably an error */ + /* Cause a hub reset after 10 consecutive errors */ + dev_dbg(hub->intfdev, "transfer --> %d\n", status); + if ((++hub->nerrors < 10) || hub->error) + goto resubmit; + hub->error = status; + fallthrough; + + /* let hub_wq handle things */ + case 0: /* we got data: port status changed */ + bits = 0; + for (i = 0; i < urb->actual_length; ++i) + bits |= ((unsigned long) ((*hub->buffer)[i])) + << (i*8); + hub->event_bits[0] = bits; + break; + } + + hub->nerrors = 0; + + /* Something happened, let hub_wq figure it out */ + kick_hub_wq(hub); + +resubmit: + hub_resubmit_irq_urb(hub); +} + +/* USB 2.0 spec Section 11.24.2.3 */ +static inline int +hub_clear_tt_buffer(struct usb_device *hdev, u16 devinfo, u16 tt) +{ + /* Need to clear both directions for control ep */ + if (((devinfo >> 11) & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_CONTROL) { + int status = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), + HUB_CLEAR_TT_BUFFER, USB_RT_PORT, + devinfo ^ 0x8000, tt, NULL, 0, 1000); + if (status) + return status; + } + return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), + HUB_CLEAR_TT_BUFFER, USB_RT_PORT, devinfo, + tt, NULL, 0, 1000); +} + +/* + * enumeration blocks hub_wq for a long time. we use keventd instead, since + * long blocking there is the exception, not the rule. accordingly, HCDs + * talking to TTs must queue control transfers (not just bulk and iso), so + * both can talk to the same hub concurrently. + */ +static void hub_tt_work(struct work_struct *work) +{ + struct usb_hub *hub = + container_of(work, struct usb_hub, tt.clear_work); + unsigned long flags; + + spin_lock_irqsave(&hub->tt.lock, flags); + while (!list_empty(&hub->tt.clear_list)) { + struct list_head *next; + struct usb_tt_clear *clear; + struct usb_device *hdev = hub->hdev; + const struct hc_driver *drv; + int status; + + next = hub->tt.clear_list.next; + clear = list_entry(next, struct usb_tt_clear, clear_list); + list_del(&clear->clear_list); + + /* drop lock so HCD can concurrently report other TT errors */ + spin_unlock_irqrestore(&hub->tt.lock, flags); + status = hub_clear_tt_buffer(hdev, clear->devinfo, clear->tt); + if (status && status != -ENODEV) + dev_err(&hdev->dev, + "clear tt %d (%04x) error %d\n", + clear->tt, clear->devinfo, status); + + /* Tell the HCD, even if the operation failed */ + drv = clear->hcd->driver; + if (drv->clear_tt_buffer_complete) + (drv->clear_tt_buffer_complete)(clear->hcd, clear->ep); + + kfree(clear); + spin_lock_irqsave(&hub->tt.lock, flags); + } + spin_unlock_irqrestore(&hub->tt.lock, flags); +} + +/** + * usb_hub_set_port_power - control hub port's power state + * @hdev: USB device belonging to the usb hub + * @hub: target hub + * @port1: port index + * @set: expected status + * + * call this function to control port's power via setting or + * clearing the port's PORT_POWER feature. + * + * Return: 0 if successful. A negative error code otherwise. + */ +int usb_hub_set_port_power(struct usb_device *hdev, struct usb_hub *hub, + int port1, bool set) +{ + int ret; + + if (set) + ret = set_port_feature(hdev, port1, USB_PORT_FEAT_POWER); + else + ret = usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_POWER); + + if (ret) + return ret; + + if (set) + set_bit(port1, hub->power_bits); + else + clear_bit(port1, hub->power_bits); + return 0; +} + +/** + * usb_hub_clear_tt_buffer - clear control/bulk TT state in high speed hub + * @urb: an URB associated with the failed or incomplete split transaction + * + * High speed HCDs use this to tell the hub driver that some split control or + * bulk transaction failed in a way that requires clearing internal state of + * a transaction translator. This is normally detected (and reported) from + * interrupt context. + * + * It may not be possible for that hub to handle additional full (or low) + * speed transactions until that state is fully cleared out. + * + * Return: 0 if successful. A negative error code otherwise. + */ +int usb_hub_clear_tt_buffer(struct urb *urb) +{ + struct usb_device *udev = urb->dev; + int pipe = urb->pipe; + struct usb_tt *tt = udev->tt; + unsigned long flags; + struct usb_tt_clear *clear; + + /* we've got to cope with an arbitrary number of pending TT clears, + * since each TT has "at least two" buffers that can need it (and + * there can be many TTs per hub). even if they're uncommon. + */ + clear = kmalloc(sizeof *clear, GFP_ATOMIC); + if (clear == NULL) { + dev_err(&udev->dev, "can't save CLEAR_TT_BUFFER state\n"); + /* FIXME recover somehow ... RESET_TT? */ + return -ENOMEM; + } + + /* info that CLEAR_TT_BUFFER needs */ + clear->tt = tt->multi ? udev->ttport : 1; + clear->devinfo = usb_pipeendpoint (pipe); + clear->devinfo |= ((u16)udev->devaddr) << 4; + clear->devinfo |= usb_pipecontrol(pipe) + ? (USB_ENDPOINT_XFER_CONTROL << 11) + : (USB_ENDPOINT_XFER_BULK << 11); + if (usb_pipein(pipe)) + clear->devinfo |= 1 << 15; + + /* info for completion callback */ + clear->hcd = bus_to_hcd(udev->bus); + clear->ep = urb->ep; + + /* tell keventd to clear state for this TT */ + spin_lock_irqsave(&tt->lock, flags); + list_add_tail(&clear->clear_list, &tt->clear_list); + schedule_work(&tt->clear_work); + spin_unlock_irqrestore(&tt->lock, flags); + return 0; +} +EXPORT_SYMBOL_GPL(usb_hub_clear_tt_buffer); + +static void hub_power_on(struct usb_hub *hub, bool do_delay) +{ + int port1; + + /* Enable power on each port. Some hubs have reserved values + * of LPSM (> 2) in their descriptors, even though they are + * USB 2.0 hubs. Some hubs do not implement port-power switching + * but only emulate it. In all cases, the ports won't work + * unless we send these messages to the hub. + */ + if (hub_is_port_power_switchable(hub)) + dev_dbg(hub->intfdev, "enabling power on all ports\n"); + else + dev_dbg(hub->intfdev, "trying to enable port power on " + "non-switchable hub\n"); + for (port1 = 1; port1 <= hub->hdev->maxchild; port1++) + if (test_bit(port1, hub->power_bits)) + set_port_feature(hub->hdev, port1, USB_PORT_FEAT_POWER); + else + usb_clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_POWER); + if (do_delay) + msleep(hub_power_on_good_delay(hub)); +} + +static int hub_hub_status(struct usb_hub *hub, + u16 *status, u16 *change) +{ + int ret; + + mutex_lock(&hub->status_mutex); + ret = get_hub_status(hub->hdev, &hub->status->hub); + if (ret < 0) { + if (ret != -ENODEV) + dev_err(hub->intfdev, + "%s failed (err = %d)\n", __func__, ret); + } else { + *status = le16_to_cpu(hub->status->hub.wHubStatus); + *change = le16_to_cpu(hub->status->hub.wHubChange); + ret = 0; + } + mutex_unlock(&hub->status_mutex); + return ret; +} + +static int hub_set_port_link_state(struct usb_hub *hub, int port1, + unsigned int link_status) +{ + return set_port_feature(hub->hdev, + port1 | (link_status << 3), + USB_PORT_FEAT_LINK_STATE); +} + +/* + * Disable a port and mark a logical connect-change event, so that some + * time later hub_wq will disconnect() any existing usb_device on the port + * and will re-enumerate if there actually is a device attached. + */ +static void hub_port_logical_disconnect(struct usb_hub *hub, int port1) +{ + dev_dbg(&hub->ports[port1 - 1]->dev, "logical disconnect\n"); + hub_port_disable(hub, port1, 1); + + /* FIXME let caller ask to power down the port: + * - some devices won't enumerate without a VBUS power cycle + * - SRP saves power that way + * - ... new call, TBD ... + * That's easy if this hub can switch power per-port, and + * hub_wq reactivates the port later (timer, SRP, etc). + * Powerdown must be optional, because of reset/DFU. + */ + + set_bit(port1, hub->change_bits); + kick_hub_wq(hub); +} + +/** + * usb_remove_device - disable a device's port on its parent hub + * @udev: device to be disabled and removed + * Context: @udev locked, must be able to sleep. + * + * After @udev's port has been disabled, hub_wq is notified and it will + * see that the device has been disconnected. When the device is + * physically unplugged and something is plugged in, the events will + * be received and processed normally. + * + * Return: 0 if successful. A negative error code otherwise. + */ +int usb_remove_device(struct usb_device *udev) +{ + struct usb_hub *hub; + struct usb_interface *intf; + int ret; + + if (!udev->parent) /* Can't remove a root hub */ + return -EINVAL; + hub = usb_hub_to_struct_hub(udev->parent); + intf = to_usb_interface(hub->intfdev); + + ret = usb_autopm_get_interface(intf); + if (ret < 0) + return ret; + + set_bit(udev->portnum, hub->removed_bits); + hub_port_logical_disconnect(hub, udev->portnum); + usb_autopm_put_interface(intf); + return 0; +} + +enum hub_activation_type { + HUB_INIT, HUB_INIT2, HUB_INIT3, /* INITs must come first */ + HUB_POST_RESET, HUB_RESUME, HUB_RESET_RESUME, +}; + +static void hub_init_func2(struct work_struct *ws); +static void hub_init_func3(struct work_struct *ws); + +static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) +{ + struct usb_device *hdev = hub->hdev; + struct usb_hcd *hcd; + int ret; + int port1; + int status; + bool need_debounce_delay = false; + unsigned delay; + + /* Continue a partial initialization */ + if (type == HUB_INIT2 || type == HUB_INIT3) { + device_lock(&hdev->dev); + + /* Was the hub disconnected while we were waiting? */ + if (hub->disconnected) + goto disconnected; + if (type == HUB_INIT2) + goto init2; + goto init3; + } + kref_get(&hub->kref); + + /* The superspeed hub except for root hub has to use Hub Depth + * value as an offset into the route string to locate the bits + * it uses to determine the downstream port number. So hub driver + * should send a set hub depth request to superspeed hub after + * the superspeed hub is set configuration in initialization or + * reset procedure. + * + * After a resume, port power should still be on. + * For any other type of activation, turn it on. + */ + if (type != HUB_RESUME) { + if (hdev->parent && hub_is_superspeed(hdev)) { + ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), + HUB_SET_DEPTH, USB_RT_HUB, + hdev->level - 1, 0, NULL, 0, + USB_CTRL_SET_TIMEOUT); + if (ret < 0) + dev_err(hub->intfdev, + "set hub depth failed\n"); + } + + /* Speed up system boot by using a delayed_work for the + * hub's initial power-up delays. This is pretty awkward + * and the implementation looks like a home-brewed sort of + * setjmp/longjmp, but it saves at least 100 ms for each + * root hub (assuming usbcore is compiled into the kernel + * rather than as a module). It adds up. + * + * This can't be done for HUB_RESUME or HUB_RESET_RESUME + * because for those activation types the ports have to be + * operational when we return. In theory this could be done + * for HUB_POST_RESET, but it's easier not to. + */ + if (type == HUB_INIT) { + delay = hub_power_on_good_delay(hub); + + hub_power_on(hub, false); + INIT_DELAYED_WORK(&hub->init_work, hub_init_func2); + queue_delayed_work(system_power_efficient_wq, + &hub->init_work, + msecs_to_jiffies(delay)); + + /* Suppress autosuspend until init is done */ + usb_autopm_get_interface_no_resume( + to_usb_interface(hub->intfdev)); + return; /* Continues at init2: below */ + } else if (type == HUB_RESET_RESUME) { + /* The internal host controller state for the hub device + * may be gone after a host power loss on system resume. + * Update the device's info so the HW knows it's a hub. + */ + hcd = bus_to_hcd(hdev->bus); + if (hcd->driver->update_hub_device) { + ret = hcd->driver->update_hub_device(hcd, hdev, + &hub->tt, GFP_NOIO); + if (ret < 0) { + dev_err(hub->intfdev, + "Host not accepting hub info update\n"); + dev_err(hub->intfdev, + "LS/FS devices and hubs may not work under this hub\n"); + } + } + hub_power_on(hub, true); + } else { + hub_power_on(hub, true); + } + /* Give some time on remote wakeup to let links to transit to U0 */ + } else if (hub_is_superspeed(hub->hdev)) + msleep(20); + + init2: + + /* + * Check each port and set hub->change_bits to let hub_wq know + * which ports need attention. + */ + for (port1 = 1; port1 <= hdev->maxchild; ++port1) { + struct usb_port *port_dev = hub->ports[port1 - 1]; + struct usb_device *udev = port_dev->child; + u16 portstatus, portchange; + + portstatus = portchange = 0; + status = usb_hub_port_status(hub, port1, &portstatus, &portchange); + if (status) + goto abort; + + if (udev || (portstatus & USB_PORT_STAT_CONNECTION)) + dev_dbg(&port_dev->dev, "status %04x change %04x\n", + portstatus, portchange); + + /* + * After anything other than HUB_RESUME (i.e., initialization + * or any sort of reset), every port should be disabled. + * Unconnected ports should likewise be disabled (paranoia), + * and so should ports for which we have no usb_device. + */ + if ((portstatus & USB_PORT_STAT_ENABLE) && ( + type != HUB_RESUME || + !(portstatus & USB_PORT_STAT_CONNECTION) || + !udev || + udev->state == USB_STATE_NOTATTACHED)) { + /* + * USB3 protocol ports will automatically transition + * to Enabled state when detect an USB3.0 device attach. + * Do not disable USB3 protocol ports, just pretend + * power was lost + */ + portstatus &= ~USB_PORT_STAT_ENABLE; + if (!hub_is_superspeed(hdev)) + usb_clear_port_feature(hdev, port1, + USB_PORT_FEAT_ENABLE); + } + + /* Make sure a warm-reset request is handled by port_event */ + if (type == HUB_RESUME && + hub_port_warm_reset_required(hub, port1, portstatus)) + set_bit(port1, hub->event_bits); + + /* + * Add debounce if USB3 link is in polling/link training state. + * Link will automatically transition to Enabled state after + * link training completes. + */ + if (hub_is_superspeed(hdev) && + ((portstatus & USB_PORT_STAT_LINK_STATE) == + USB_SS_PORT_LS_POLLING)) + need_debounce_delay = true; + + /* Clear status-change flags; we'll debounce later */ + if (portchange & USB_PORT_STAT_C_CONNECTION) { + need_debounce_delay = true; + usb_clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_CONNECTION); + } + if (portchange & USB_PORT_STAT_C_ENABLE) { + need_debounce_delay = true; + usb_clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_ENABLE); + } + if (portchange & USB_PORT_STAT_C_RESET) { + need_debounce_delay = true; + usb_clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_RESET); + } + if ((portchange & USB_PORT_STAT_C_BH_RESET) && + hub_is_superspeed(hub->hdev)) { + need_debounce_delay = true; + usb_clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_BH_PORT_RESET); + } + /* We can forget about a "removed" device when there's a + * physical disconnect or the connect status changes. + */ + if (!(portstatus & USB_PORT_STAT_CONNECTION) || + (portchange & USB_PORT_STAT_C_CONNECTION)) + clear_bit(port1, hub->removed_bits); + + if (!udev || udev->state == USB_STATE_NOTATTACHED) { + /* Tell hub_wq to disconnect the device or + * check for a new connection or over current condition. + * Based on USB2.0 Spec Section 11.12.5, + * C_PORT_OVER_CURRENT could be set while + * PORT_OVER_CURRENT is not. So check for any of them. + */ + if (udev || (portstatus & USB_PORT_STAT_CONNECTION) || + (portchange & USB_PORT_STAT_C_CONNECTION) || + (portstatus & USB_PORT_STAT_OVERCURRENT) || + (portchange & USB_PORT_STAT_C_OVERCURRENT)) + set_bit(port1, hub->change_bits); + + } else if (portstatus & USB_PORT_STAT_ENABLE) { + bool port_resumed = (portstatus & + USB_PORT_STAT_LINK_STATE) == + USB_SS_PORT_LS_U0; + /* The power session apparently survived the resume. + * If there was an overcurrent or suspend change + * (i.e., remote wakeup request), have hub_wq + * take care of it. Look at the port link state + * for USB 3.0 hubs, since they don't have a suspend + * change bit, and they don't set the port link change + * bit on device-initiated resume. + */ + if (portchange || (hub_is_superspeed(hub->hdev) && + port_resumed)) + set_bit(port1, hub->event_bits); + + } else if (udev->persist_enabled) { +#ifdef CONFIG_PM + udev->reset_resume = 1; +#endif + /* Don't set the change_bits when the device + * was powered off. + */ + if (test_bit(port1, hub->power_bits)) + set_bit(port1, hub->change_bits); + + } else { + /* The power session is gone; tell hub_wq */ + usb_set_device_state(udev, USB_STATE_NOTATTACHED); + set_bit(port1, hub->change_bits); + } + } + + /* If no port-status-change flags were set, we don't need any + * debouncing. If flags were set we can try to debounce the + * ports all at once right now, instead of letting hub_wq do them + * one at a time later on. + * + * If any port-status changes do occur during this delay, hub_wq + * will see them later and handle them normally. + */ + if (need_debounce_delay) { + delay = HUB_DEBOUNCE_STABLE; + + /* Don't do a long sleep inside a workqueue routine */ + if (type == HUB_INIT2) { + INIT_DELAYED_WORK(&hub->init_work, hub_init_func3); + queue_delayed_work(system_power_efficient_wq, + &hub->init_work, + msecs_to_jiffies(delay)); + device_unlock(&hdev->dev); + return; /* Continues at init3: below */ + } else { + msleep(delay); + } + } + init3: + hub->quiescing = 0; + + status = usb_submit_urb(hub->urb, GFP_NOIO); + if (status < 0) + dev_err(hub->intfdev, "activate --> %d\n", status); + if (hub->has_indicators && blinkenlights) + queue_delayed_work(system_power_efficient_wq, + &hub->leds, LED_CYCLE_PERIOD); + + /* Scan all ports that need attention */ + kick_hub_wq(hub); + abort: + if (type == HUB_INIT2 || type == HUB_INIT3) { + /* Allow autosuspend if it was suppressed */ + disconnected: + usb_autopm_put_interface_async(to_usb_interface(hub->intfdev)); + device_unlock(&hdev->dev); + } + + kref_put(&hub->kref, hub_release); +} + +/* Implement the continuations for the delays above */ +static void hub_init_func2(struct work_struct *ws) +{ + struct usb_hub *hub = container_of(ws, struct usb_hub, init_work.work); + + hub_activate(hub, HUB_INIT2); +} + +static void hub_init_func3(struct work_struct *ws) +{ + struct usb_hub *hub = container_of(ws, struct usb_hub, init_work.work); + + hub_activate(hub, HUB_INIT3); +} + +enum hub_quiescing_type { + HUB_DISCONNECT, HUB_PRE_RESET, HUB_SUSPEND +}; + +static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type) +{ + struct usb_device *hdev = hub->hdev; + unsigned long flags; + int i; + + /* hub_wq and related activity won't re-trigger */ + spin_lock_irqsave(&hub->irq_urb_lock, flags); + hub->quiescing = 1; + spin_unlock_irqrestore(&hub->irq_urb_lock, flags); + + if (type != HUB_SUSPEND) { + /* Disconnect all the children */ + for (i = 0; i < hdev->maxchild; ++i) { + if (hub->ports[i]->child) + usb_disconnect(&hub->ports[i]->child); + } + } + + /* Stop hub_wq and related activity */ + del_timer_sync(&hub->irq_urb_retry); + usb_kill_urb(hub->urb); + if (hub->has_indicators) + cancel_delayed_work_sync(&hub->leds); + if (hub->tt.hub) + flush_work(&hub->tt.clear_work); +} + +static void hub_pm_barrier_for_all_ports(struct usb_hub *hub) +{ + int i; + + for (i = 0; i < hub->hdev->maxchild; ++i) + pm_runtime_barrier(&hub->ports[i]->dev); +} + +/* caller has locked the hub device */ +static int hub_pre_reset(struct usb_interface *intf) +{ + struct usb_hub *hub = usb_get_intfdata(intf); + + hub_quiesce(hub, HUB_PRE_RESET); + hub->in_reset = 1; + hub_pm_barrier_for_all_ports(hub); + return 0; +} + +/* caller has locked the hub device */ +static int hub_post_reset(struct usb_interface *intf) +{ + struct usb_hub *hub = usb_get_intfdata(intf); + + hub->in_reset = 0; + hub_pm_barrier_for_all_ports(hub); + hub_activate(hub, HUB_POST_RESET); + return 0; +} + +static int hub_configure(struct usb_hub *hub, + struct usb_endpoint_descriptor *endpoint) +{ + struct usb_hcd *hcd; + struct usb_device *hdev = hub->hdev; + struct device *hub_dev = hub->intfdev; + u16 hubstatus, hubchange; + u16 wHubCharacteristics; + unsigned int pipe; + int maxp, ret, i; + char *message = "out of memory"; + unsigned unit_load; + unsigned full_load; + unsigned maxchild; + + hub->buffer = kmalloc(sizeof(*hub->buffer), GFP_KERNEL); + if (!hub->buffer) { + ret = -ENOMEM; + goto fail; + } + + hub->status = kmalloc(sizeof(*hub->status), GFP_KERNEL); + if (!hub->status) { + ret = -ENOMEM; + goto fail; + } + mutex_init(&hub->status_mutex); + + hub->descriptor = kzalloc(sizeof(*hub->descriptor), GFP_KERNEL); + if (!hub->descriptor) { + ret = -ENOMEM; + goto fail; + } + + /* Request the entire hub descriptor. + * hub->descriptor can handle USB_MAXCHILDREN ports, + * but a (non-SS) hub can/will return fewer bytes here. + */ + ret = get_hub_descriptor(hdev, hub->descriptor); + if (ret < 0) { + message = "can't read hub descriptor"; + goto fail; + } + + maxchild = USB_MAXCHILDREN; + if (hub_is_superspeed(hdev)) + maxchild = min_t(unsigned, maxchild, USB_SS_MAXPORTS); + + if (hub->descriptor->bNbrPorts > maxchild) { + message = "hub has too many ports!"; + ret = -ENODEV; + goto fail; + } else if (hub->descriptor->bNbrPorts == 0) { + message = "hub doesn't have any ports!"; + ret = -ENODEV; + goto fail; + } + + /* + * Accumulate wHubDelay + 40ns for every hub in the tree of devices. + * The resulting value will be used for SetIsochDelay() request. + */ + if (hub_is_superspeed(hdev) || hub_is_superspeedplus(hdev)) { + u32 delay = __le16_to_cpu(hub->descriptor->u.ss.wHubDelay); + + if (hdev->parent) + delay += hdev->parent->hub_delay; + + delay += USB_TP_TRANSMISSION_DELAY; + hdev->hub_delay = min_t(u32, delay, USB_TP_TRANSMISSION_DELAY_MAX); + } + + maxchild = hub->descriptor->bNbrPorts; + dev_info(hub_dev, "%d port%s detected\n", maxchild, + (maxchild == 1) ? "" : "s"); + + hub->ports = kcalloc(maxchild, sizeof(struct usb_port *), GFP_KERNEL); + if (!hub->ports) { + ret = -ENOMEM; + goto fail; + } + + wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics); + if (hub_is_superspeed(hdev)) { + unit_load = 150; + full_load = 900; + } else { + unit_load = 100; + full_load = 500; + } + + /* FIXME for USB 3.0, skip for now */ + if ((wHubCharacteristics & HUB_CHAR_COMPOUND) && + !(hub_is_superspeed(hdev))) { + char portstr[USB_MAXCHILDREN + 1]; + + for (i = 0; i < maxchild; i++) + portstr[i] = hub->descriptor->u.hs.DeviceRemovable + [((i + 1) / 8)] & (1 << ((i + 1) % 8)) + ? 'F' : 'R'; + portstr[maxchild] = 0; + dev_dbg(hub_dev, "compound device; port removable status: %s\n", portstr); + } else + dev_dbg(hub_dev, "standalone hub\n"); + + switch (wHubCharacteristics & HUB_CHAR_LPSM) { + case HUB_CHAR_COMMON_LPSM: + dev_dbg(hub_dev, "ganged power switching\n"); + break; + case HUB_CHAR_INDV_PORT_LPSM: + dev_dbg(hub_dev, "individual port power switching\n"); + break; + case HUB_CHAR_NO_LPSM: + case HUB_CHAR_LPSM: + dev_dbg(hub_dev, "no power switching (usb 1.0)\n"); + break; + } + + switch (wHubCharacteristics & HUB_CHAR_OCPM) { + case HUB_CHAR_COMMON_OCPM: + dev_dbg(hub_dev, "global over-current protection\n"); + break; + case HUB_CHAR_INDV_PORT_OCPM: + dev_dbg(hub_dev, "individual port over-current protection\n"); + break; + case HUB_CHAR_NO_OCPM: + case HUB_CHAR_OCPM: + dev_dbg(hub_dev, "no over-current protection\n"); + break; + } + + spin_lock_init(&hub->tt.lock); + INIT_LIST_HEAD(&hub->tt.clear_list); + INIT_WORK(&hub->tt.clear_work, hub_tt_work); + switch (hdev->descriptor.bDeviceProtocol) { + case USB_HUB_PR_FS: + break; + case USB_HUB_PR_HS_SINGLE_TT: + dev_dbg(hub_dev, "Single TT\n"); + hub->tt.hub = hdev; + break; + case USB_HUB_PR_HS_MULTI_TT: + ret = usb_set_interface(hdev, 0, 1); + if (ret == 0) { + dev_dbg(hub_dev, "TT per port\n"); + hub->tt.multi = 1; + } else + dev_err(hub_dev, "Using single TT (err %d)\n", + ret); + hub->tt.hub = hdev; + break; + case USB_HUB_PR_SS: + /* USB 3.0 hubs don't have a TT */ + break; + default: + dev_dbg(hub_dev, "Unrecognized hub protocol %d\n", + hdev->descriptor.bDeviceProtocol); + break; + } + + /* Note 8 FS bit times == (8 bits / 12000000 bps) ~= 666ns */ + switch (wHubCharacteristics & HUB_CHAR_TTTT) { + case HUB_TTTT_8_BITS: + if (hdev->descriptor.bDeviceProtocol != 0) { + hub->tt.think_time = 666; + dev_dbg(hub_dev, "TT requires at most %d " + "FS bit times (%d ns)\n", + 8, hub->tt.think_time); + } + break; + case HUB_TTTT_16_BITS: + hub->tt.think_time = 666 * 2; + dev_dbg(hub_dev, "TT requires at most %d " + "FS bit times (%d ns)\n", + 16, hub->tt.think_time); + break; + case HUB_TTTT_24_BITS: + hub->tt.think_time = 666 * 3; + dev_dbg(hub_dev, "TT requires at most %d " + "FS bit times (%d ns)\n", + 24, hub->tt.think_time); + break; + case HUB_TTTT_32_BITS: + hub->tt.think_time = 666 * 4; + dev_dbg(hub_dev, "TT requires at most %d " + "FS bit times (%d ns)\n", + 32, hub->tt.think_time); + break; + } + + /* probe() zeroes hub->indicator[] */ + if (wHubCharacteristics & HUB_CHAR_PORTIND) { + hub->has_indicators = 1; + dev_dbg(hub_dev, "Port indicators are supported\n"); + } + + dev_dbg(hub_dev, "power on to power good time: %dms\n", + hub->descriptor->bPwrOn2PwrGood * 2); + + /* power budgeting mostly matters with bus-powered hubs, + * and battery-powered root hubs (may provide just 8 mA). + */ + ret = usb_get_std_status(hdev, USB_RECIP_DEVICE, 0, &hubstatus); + if (ret) { + message = "can't get hub status"; + goto fail; + } + hcd = bus_to_hcd(hdev->bus); + if (hdev == hdev->bus->root_hub) { + if (hcd->power_budget > 0) + hdev->bus_mA = hcd->power_budget; + else + hdev->bus_mA = full_load * maxchild; + if (hdev->bus_mA >= full_load) + hub->mA_per_port = full_load; + else { + hub->mA_per_port = hdev->bus_mA; + hub->limited_power = 1; + } + } else if ((hubstatus & (1 << USB_DEVICE_SELF_POWERED)) == 0) { + int remaining = hdev->bus_mA - + hub->descriptor->bHubContrCurrent; + + dev_dbg(hub_dev, "hub controller current requirement: %dmA\n", + hub->descriptor->bHubContrCurrent); + hub->limited_power = 1; + + if (remaining < maxchild * unit_load) + dev_warn(hub_dev, + "insufficient power available " + "to use all downstream ports\n"); + hub->mA_per_port = unit_load; /* 7.2.1 */ + + } else { /* Self-powered external hub */ + /* FIXME: What about battery-powered external hubs that + * provide less current per port? */ + hub->mA_per_port = full_load; + } + if (hub->mA_per_port < full_load) + dev_dbg(hub_dev, "%umA bus power budget for each child\n", + hub->mA_per_port); + + ret = hub_hub_status(hub, &hubstatus, &hubchange); + if (ret < 0) { + message = "can't get hub status"; + goto fail; + } + + /* local power status reports aren't always correct */ + if (hdev->actconfig->desc.bmAttributes & USB_CONFIG_ATT_SELFPOWER) + dev_dbg(hub_dev, "local power source is %s\n", + (hubstatus & HUB_STATUS_LOCAL_POWER) + ? "lost (inactive)" : "good"); + + if ((wHubCharacteristics & HUB_CHAR_OCPM) == 0) + dev_dbg(hub_dev, "%sover-current condition exists\n", + (hubstatus & HUB_STATUS_OVERCURRENT) ? "" : "no "); + + /* set up the interrupt endpoint + * We use the EP's maxpacket size instead of (PORTS+1+7)/8 + * bytes as USB2.0[11.12.3] says because some hubs are known + * to send more data (and thus cause overflow). For root hubs, + * maxpktsize is defined in hcd.c's fake endpoint descriptors + * to be big enough for at least USB_MAXCHILDREN ports. */ + pipe = usb_rcvintpipe(hdev, endpoint->bEndpointAddress); + maxp = usb_maxpacket(hdev, pipe); + + if (maxp > sizeof(*hub->buffer)) + maxp = sizeof(*hub->buffer); + + hub->urb = usb_alloc_urb(0, GFP_KERNEL); + if (!hub->urb) { + ret = -ENOMEM; + goto fail; + } + + usb_fill_int_urb(hub->urb, hdev, pipe, *hub->buffer, maxp, hub_irq, + hub, endpoint->bInterval); + + /* maybe cycle the hub leds */ + if (hub->has_indicators && blinkenlights) + hub->indicator[0] = INDICATOR_CYCLE; + + mutex_lock(&usb_port_peer_mutex); + for (i = 0; i < maxchild; i++) { + ret = usb_hub_create_port_device(hub, i + 1); + if (ret < 0) { + dev_err(hub->intfdev, + "couldn't create port%d device.\n", i + 1); + break; + } + } + hdev->maxchild = i; + for (i = 0; i < hdev->maxchild; i++) { + struct usb_port *port_dev = hub->ports[i]; + + pm_runtime_put(&port_dev->dev); + } + + mutex_unlock(&usb_port_peer_mutex); + if (ret < 0) + goto fail; + + /* Update the HCD's internal representation of this hub before hub_wq + * starts getting port status changes for devices under the hub. + */ + if (hcd->driver->update_hub_device) { + ret = hcd->driver->update_hub_device(hcd, hdev, + &hub->tt, GFP_KERNEL); + if (ret < 0) { + message = "can't update HCD hub info"; + goto fail; + } + } + + usb_hub_adjust_deviceremovable(hdev, hub->descriptor); + + hub_activate(hub, HUB_INIT); + return 0; + +fail: + dev_err(hub_dev, "config failed, %s (err %d)\n", + message, ret); + /* hub_disconnect() frees urb and descriptor */ + return ret; +} + +static void hub_release(struct kref *kref) +{ + struct usb_hub *hub = container_of(kref, struct usb_hub, kref); + + usb_put_dev(hub->hdev); + usb_put_intf(to_usb_interface(hub->intfdev)); + kfree(hub); +} + +static unsigned highspeed_hubs; + +static void hub_disconnect(struct usb_interface *intf) +{ + struct usb_hub *hub = usb_get_intfdata(intf); + struct usb_device *hdev = interface_to_usbdev(intf); + int port1; + + /* + * Stop adding new hub events. We do not want to block here and thus + * will not try to remove any pending work item. + */ + hub->disconnected = 1; + + /* Disconnect all children and quiesce the hub */ + hub->error = 0; + hub_quiesce(hub, HUB_DISCONNECT); + + mutex_lock(&usb_port_peer_mutex); + + /* Avoid races with recursively_mark_NOTATTACHED() */ + spin_lock_irq(&device_state_lock); + port1 = hdev->maxchild; + hdev->maxchild = 0; + usb_set_intfdata(intf, NULL); + spin_unlock_irq(&device_state_lock); + + for (; port1 > 0; --port1) + usb_hub_remove_port_device(hub, port1); + + mutex_unlock(&usb_port_peer_mutex); + + if (hub->hdev->speed == USB_SPEED_HIGH) + highspeed_hubs--; + + usb_free_urb(hub->urb); + kfree(hub->ports); + kfree(hub->descriptor); + kfree(hub->status); + kfree(hub->buffer); + + pm_suspend_ignore_children(&intf->dev, false); + + if (hub->quirk_disable_autosuspend) + usb_autopm_put_interface(intf); + + onboard_hub_destroy_pdevs(&hub->onboard_hub_devs); + + kref_put(&hub->kref, hub_release); +} + +static bool hub_descriptor_is_sane(struct usb_host_interface *desc) +{ + /* Some hubs have a subclass of 1, which AFAICT according to the */ + /* specs is not defined, but it works */ + if (desc->desc.bInterfaceSubClass != 0 && + desc->desc.bInterfaceSubClass != 1) + return false; + + /* Multiple endpoints? What kind of mutant ninja-hub is this? */ + if (desc->desc.bNumEndpoints != 1) + return false; + + /* If the first endpoint is not interrupt IN, we'd better punt! */ + if (!usb_endpoint_is_int_in(&desc->endpoint[0].desc)) + return false; + + return true; +} + +static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + struct usb_host_interface *desc; + struct usb_device *hdev; + struct usb_hub *hub; + + desc = intf->cur_altsetting; + hdev = interface_to_usbdev(intf); + + /* + * Set default autosuspend delay as 0 to speedup bus suspend, + * based on the below considerations: + * + * - Unlike other drivers, the hub driver does not rely on the + * autosuspend delay to provide enough time to handle a wakeup + * event, and the submitted status URB is just to check future + * change on hub downstream ports, so it is safe to do it. + * + * - The patch might cause one or more auto supend/resume for + * below very rare devices when they are plugged into hub + * first time: + * + * devices having trouble initializing, and disconnect + * themselves from the bus and then reconnect a second + * or so later + * + * devices just for downloading firmware, and disconnects + * themselves after completing it + * + * For these quite rare devices, their drivers may change the + * autosuspend delay of their parent hub in the probe() to one + * appropriate value to avoid the subtle problem if someone + * does care it. + * + * - The patch may cause one or more auto suspend/resume on + * hub during running 'lsusb', but it is probably too + * infrequent to worry about. + * + * - Change autosuspend delay of hub can avoid unnecessary auto + * suspend timer for hub, also may decrease power consumption + * of USB bus. + * + * - If user has indicated to prevent autosuspend by passing + * usbcore.autosuspend = -1 then keep autosuspend disabled. + */ +#ifdef CONFIG_PM + if (hdev->dev.power.autosuspend_delay >= 0) + pm_runtime_set_autosuspend_delay(&hdev->dev, 0); +#endif + + /* + * Hubs have proper suspend/resume support, except for root hubs + * where the controller driver doesn't have bus_suspend and + * bus_resume methods. + */ + if (hdev->parent) { /* normal device */ + usb_enable_autosuspend(hdev); + } else { /* root hub */ + const struct hc_driver *drv = bus_to_hcd(hdev->bus)->driver; + + if (drv->bus_suspend && drv->bus_resume) + usb_enable_autosuspend(hdev); + } + + if (hdev->level == MAX_TOPO_LEVEL) { + dev_err(&intf->dev, + "Unsupported bus topology: hub nested too deep\n"); + return -E2BIG; + } + +#ifdef CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB + if (hdev->parent) { + dev_warn(&intf->dev, "ignoring external hub\n"); + return -ENODEV; + } +#endif + + if (!hub_descriptor_is_sane(desc)) { + dev_err(&intf->dev, "bad descriptor, ignoring hub\n"); + return -EIO; + } + + /* We found a hub */ + dev_info(&intf->dev, "USB hub found\n"); + + hub = kzalloc(sizeof(*hub), GFP_KERNEL); + if (!hub) + return -ENOMEM; + + kref_init(&hub->kref); + hub->intfdev = &intf->dev; + hub->hdev = hdev; + INIT_DELAYED_WORK(&hub->leds, led_work); + INIT_DELAYED_WORK(&hub->init_work, NULL); + INIT_WORK(&hub->events, hub_event); + INIT_LIST_HEAD(&hub->onboard_hub_devs); + spin_lock_init(&hub->irq_urb_lock); + timer_setup(&hub->irq_urb_retry, hub_retry_irq_urb, 0); + usb_get_intf(intf); + usb_get_dev(hdev); + + usb_set_intfdata(intf, hub); + intf->needs_remote_wakeup = 1; + pm_suspend_ignore_children(&intf->dev, true); + + if (hdev->speed == USB_SPEED_HIGH) + highspeed_hubs++; + + if (id->driver_info & HUB_QUIRK_CHECK_PORT_AUTOSUSPEND) + hub->quirk_check_port_auto_suspend = 1; + + if (id->driver_info & HUB_QUIRK_DISABLE_AUTOSUSPEND) { + hub->quirk_disable_autosuspend = 1; + usb_autopm_get_interface_no_resume(intf); + } + + if (hub_configure(hub, &desc->endpoint[0].desc) >= 0) { + onboard_hub_create_pdevs(hdev, &hub->onboard_hub_devs); + + return 0; + } + + hub_disconnect(intf); + return -ENODEV; +} + +static int +hub_ioctl(struct usb_interface *intf, unsigned int code, void *user_data) +{ + struct usb_device *hdev = interface_to_usbdev(intf); + struct usb_hub *hub = usb_hub_to_struct_hub(hdev); + + /* assert ifno == 0 (part of hub spec) */ + switch (code) { + case USBDEVFS_HUB_PORTINFO: { + struct usbdevfs_hub_portinfo *info = user_data; + int i; + + spin_lock_irq(&device_state_lock); + if (hdev->devnum <= 0) + info->nports = 0; + else { + info->nports = hdev->maxchild; + for (i = 0; i < info->nports; i++) { + if (hub->ports[i]->child == NULL) + info->port[i] = 0; + else + info->port[i] = + hub->ports[i]->child->devnum; + } + } + spin_unlock_irq(&device_state_lock); + + return info->nports + 1; + } + + default: + return -ENOSYS; + } +} + +/* + * Allow user programs to claim ports on a hub. When a device is attached + * to one of these "claimed" ports, the program will "own" the device. + */ +static int find_port_owner(struct usb_device *hdev, unsigned port1, + struct usb_dev_state ***ppowner) +{ + struct usb_hub *hub = usb_hub_to_struct_hub(hdev); + + if (hdev->state == USB_STATE_NOTATTACHED) + return -ENODEV; + if (port1 == 0 || port1 > hdev->maxchild) + return -EINVAL; + + /* Devices not managed by the hub driver + * will always have maxchild equal to 0. + */ + *ppowner = &(hub->ports[port1 - 1]->port_owner); + return 0; +} + +/* In the following three functions, the caller must hold hdev's lock */ +int usb_hub_claim_port(struct usb_device *hdev, unsigned port1, + struct usb_dev_state *owner) +{ + int rc; + struct usb_dev_state **powner; + + rc = find_port_owner(hdev, port1, &powner); + if (rc) + return rc; + if (*powner) + return -EBUSY; + *powner = owner; + return rc; +} +EXPORT_SYMBOL_GPL(usb_hub_claim_port); + +int usb_hub_release_port(struct usb_device *hdev, unsigned port1, + struct usb_dev_state *owner) +{ + int rc; + struct usb_dev_state **powner; + + rc = find_port_owner(hdev, port1, &powner); + if (rc) + return rc; + if (*powner != owner) + return -ENOENT; + *powner = NULL; + return rc; +} +EXPORT_SYMBOL_GPL(usb_hub_release_port); + +void usb_hub_release_all_ports(struct usb_device *hdev, struct usb_dev_state *owner) +{ + struct usb_hub *hub = usb_hub_to_struct_hub(hdev); + int n; + + for (n = 0; n < hdev->maxchild; n++) { + if (hub->ports[n]->port_owner == owner) + hub->ports[n]->port_owner = NULL; + } + +} + +/* The caller must hold udev's lock */ +bool usb_device_is_owned(struct usb_device *udev) +{ + struct usb_hub *hub; + + if (udev->state == USB_STATE_NOTATTACHED || !udev->parent) + return false; + hub = usb_hub_to_struct_hub(udev->parent); + return !!hub->ports[udev->portnum - 1]->port_owner; +} + +static void recursively_mark_NOTATTACHED(struct usb_device *udev) +{ + struct usb_hub *hub = usb_hub_to_struct_hub(udev); + int i; + + for (i = 0; i < udev->maxchild; ++i) { + if (hub->ports[i]->child) + recursively_mark_NOTATTACHED(hub->ports[i]->child); + } + if (udev->state == USB_STATE_SUSPENDED) + udev->active_duration -= jiffies; + udev->state = USB_STATE_NOTATTACHED; +} + +/** + * usb_set_device_state - change a device's current state (usbcore, hcds) + * @udev: pointer to device whose state should be changed + * @new_state: new state value to be stored + * + * udev->state is _not_ fully protected by the device lock. Although + * most transitions are made only while holding the lock, the state can + * can change to USB_STATE_NOTATTACHED at almost any time. This + * is so that devices can be marked as disconnected as soon as possible, + * without having to wait for any semaphores to be released. As a result, + * all changes to any device's state must be protected by the + * device_state_lock spinlock. + * + * Once a device has been added to the device tree, all changes to its state + * should be made using this routine. The state should _not_ be set directly. + * + * If udev->state is already USB_STATE_NOTATTACHED then no change is made. + * Otherwise udev->state is set to new_state, and if new_state is + * USB_STATE_NOTATTACHED then all of udev's descendants' states are also set + * to USB_STATE_NOTATTACHED. + */ +void usb_set_device_state(struct usb_device *udev, + enum usb_device_state new_state) +{ + unsigned long flags; + int wakeup = -1; + + spin_lock_irqsave(&device_state_lock, flags); + if (udev->state == USB_STATE_NOTATTACHED) + ; /* do nothing */ + else if (new_state != USB_STATE_NOTATTACHED) { + + /* root hub wakeup capabilities are managed out-of-band + * and may involve silicon errata ... ignore them here. + */ + if (udev->parent) { + if (udev->state == USB_STATE_SUSPENDED + || new_state == USB_STATE_SUSPENDED) + ; /* No change to wakeup settings */ + else if (new_state == USB_STATE_CONFIGURED) + wakeup = (udev->quirks & + USB_QUIRK_IGNORE_REMOTE_WAKEUP) ? 0 : + udev->actconfig->desc.bmAttributes & + USB_CONFIG_ATT_WAKEUP; + else + wakeup = 0; + } + if (udev->state == USB_STATE_SUSPENDED && + new_state != USB_STATE_SUSPENDED) + udev->active_duration -= jiffies; + else if (new_state == USB_STATE_SUSPENDED && + udev->state != USB_STATE_SUSPENDED) + udev->active_duration += jiffies; + udev->state = new_state; + } else + recursively_mark_NOTATTACHED(udev); + spin_unlock_irqrestore(&device_state_lock, flags); + if (wakeup >= 0) + device_set_wakeup_capable(&udev->dev, wakeup); +} +EXPORT_SYMBOL_GPL(usb_set_device_state); + +/* + * Choose a device number. + * + * Device numbers are used as filenames in usbfs. On USB-1.1 and + * USB-2.0 buses they are also used as device addresses, however on + * USB-3.0 buses the address is assigned by the controller hardware + * and it usually is not the same as the device number. + * + * WUSB devices are simple: they have no hubs behind, so the mapping + * device <-> virtual port number becomes 1:1. Why? to simplify the + * life of the device connection logic in + * drivers/usb/wusbcore/devconnect.c. When we do the initial secret + * handshake we need to assign a temporary address in the unauthorized + * space. For simplicity we use the first virtual port number found to + * be free [drivers/usb/wusbcore/devconnect.c:wusbhc_devconnect_ack()] + * and that becomes it's address [X < 128] or its unauthorized address + * [X | 0x80]. + * + * We add 1 as an offset to the one-based USB-stack port number + * (zero-based wusb virtual port index) for two reasons: (a) dev addr + * 0 is reserved by USB for default address; (b) Linux's USB stack + * uses always #1 for the root hub of the controller. So USB stack's + * port #1, which is wusb virtual-port #0 has address #2. + * + * Devices connected under xHCI are not as simple. The host controller + * supports virtualization, so the hardware assigns device addresses and + * the HCD must setup data structures before issuing a set address + * command to the hardware. + */ +static void choose_devnum(struct usb_device *udev) +{ + int devnum; + struct usb_bus *bus = udev->bus; + + /* be safe when more hub events are proceed in parallel */ + mutex_lock(&bus->devnum_next_mutex); + if (udev->wusb) { + devnum = udev->portnum + 1; + BUG_ON(test_bit(devnum, bus->devmap.devicemap)); + } else { + /* Try to allocate the next devnum beginning at + * bus->devnum_next. */ + devnum = find_next_zero_bit(bus->devmap.devicemap, 128, + bus->devnum_next); + if (devnum >= 128) + devnum = find_next_zero_bit(bus->devmap.devicemap, + 128, 1); + bus->devnum_next = (devnum >= 127 ? 1 : devnum + 1); + } + if (devnum < 128) { + set_bit(devnum, bus->devmap.devicemap); + udev->devnum = devnum; + } + mutex_unlock(&bus->devnum_next_mutex); +} + +static void release_devnum(struct usb_device *udev) +{ + if (udev->devnum > 0) { + clear_bit(udev->devnum, udev->bus->devmap.devicemap); + udev->devnum = -1; + } +} + +static void update_devnum(struct usb_device *udev, int devnum) +{ + /* The address for a WUSB device is managed by wusbcore. */ + if (!udev->wusb) + udev->devnum = devnum; + if (!udev->devaddr) + udev->devaddr = (u8)devnum; +} + +static void hub_free_dev(struct usb_device *udev) +{ + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + + /* Root hubs aren't real devices, so don't free HCD resources */ + if (hcd->driver->free_dev && udev->parent) + hcd->driver->free_dev(hcd, udev); +} + +static void hub_disconnect_children(struct usb_device *udev) +{ + struct usb_hub *hub = usb_hub_to_struct_hub(udev); + int i; + + /* Free up all the children before we remove this device */ + for (i = 0; i < udev->maxchild; i++) { + if (hub->ports[i]->child) + usb_disconnect(&hub->ports[i]->child); + } +} + +/** + * usb_disconnect - disconnect a device (usbcore-internal) + * @pdev: pointer to device being disconnected + * + * Context: task context, might sleep + * + * Something got disconnected. Get rid of it and all of its children. + * + * If *pdev is a normal device then the parent hub must already be locked. + * If *pdev is a root hub then the caller must hold the usb_bus_idr_lock, + * which protects the set of root hubs as well as the list of buses. + * + * Only hub drivers (including virtual root hub drivers for host + * controllers) should ever call this. + * + * This call is synchronous, and may not be used in an interrupt context. + */ +void usb_disconnect(struct usb_device **pdev) +{ + struct usb_port *port_dev = NULL; + struct usb_device *udev = *pdev; + struct usb_hub *hub = NULL; + int port1 = 1; + + /* mark the device as inactive, so any further urb submissions for + * this device (and any of its children) will fail immediately. + * this quiesces everything except pending urbs. + */ + usb_set_device_state(udev, USB_STATE_NOTATTACHED); + dev_info(&udev->dev, "USB disconnect, device number %d\n", + udev->devnum); + + /* + * Ensure that the pm runtime code knows that the USB device + * is in the process of being disconnected. + */ + pm_runtime_barrier(&udev->dev); + + usb_lock_device(udev); + + hub_disconnect_children(udev); + + /* deallocate hcd/hardware state ... nuking all pending urbs and + * cleaning up all state associated with the current configuration + * so that the hardware is now fully quiesced. + */ + dev_dbg(&udev->dev, "unregistering device\n"); + usb_disable_device(udev, 0); + usb_hcd_synchronize_unlinks(udev); + + if (udev->parent) { + port1 = udev->portnum; + hub = usb_hub_to_struct_hub(udev->parent); + port_dev = hub->ports[port1 - 1]; + + sysfs_remove_link(&udev->dev.kobj, "port"); + sysfs_remove_link(&port_dev->dev.kobj, "device"); + + /* + * As usb_port_runtime_resume() de-references udev, make + * sure no resumes occur during removal + */ + if (!test_and_set_bit(port1, hub->child_usage_bits)) + pm_runtime_get_sync(&port_dev->dev); + } + + usb_remove_ep_devs(&udev->ep0); + usb_unlock_device(udev); + + /* Unregister the device. The device driver is responsible + * for de-configuring the device and invoking the remove-device + * notifier chain (used by usbfs and possibly others). + */ + device_del(&udev->dev); + + /* Free the device number and delete the parent's children[] + * (or root_hub) pointer. + */ + release_devnum(udev); + + /* Avoid races with recursively_mark_NOTATTACHED() */ + spin_lock_irq(&device_state_lock); + *pdev = NULL; + spin_unlock_irq(&device_state_lock); + + if (port_dev && test_and_clear_bit(port1, hub->child_usage_bits)) + pm_runtime_put(&port_dev->dev); + + hub_free_dev(udev); + + put_device(&udev->dev); +} + +#ifdef CONFIG_USB_ANNOUNCE_NEW_DEVICES +static void show_string(struct usb_device *udev, char *id, char *string) +{ + if (!string) + return; + dev_info(&udev->dev, "%s: %s\n", id, string); +} + +static void announce_device(struct usb_device *udev) +{ + u16 bcdDevice = le16_to_cpu(udev->descriptor.bcdDevice); + + dev_info(&udev->dev, + "New USB device found, idVendor=%04x, idProduct=%04x, bcdDevice=%2x.%02x\n", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct), + bcdDevice >> 8, bcdDevice & 0xff); + dev_info(&udev->dev, + "New USB device strings: Mfr=%d, Product=%d, SerialNumber=%d\n", + udev->descriptor.iManufacturer, + udev->descriptor.iProduct, + udev->descriptor.iSerialNumber); + show_string(udev, "Product", udev->product); + show_string(udev, "Manufacturer", udev->manufacturer); + show_string(udev, "SerialNumber", udev->serial); +} +#else +static inline void announce_device(struct usb_device *udev) { } +#endif + + +/** + * usb_enumerate_device_otg - FIXME (usbcore-internal) + * @udev: newly addressed device (in ADDRESS state) + * + * Finish enumeration for On-The-Go devices + * + * Return: 0 if successful. A negative error code otherwise. + */ +static int usb_enumerate_device_otg(struct usb_device *udev) +{ + int err = 0; + +#ifdef CONFIG_USB_OTG + /* + * OTG-aware devices on OTG-capable root hubs may be able to use SRP, + * to wake us after we've powered off VBUS; and HNP, switching roles + * "host" to "peripheral". The OTG descriptor helps figure this out. + */ + if (!udev->bus->is_b_host + && udev->config + && udev->parent == udev->bus->root_hub) { + struct usb_otg_descriptor *desc = NULL; + struct usb_bus *bus = udev->bus; + unsigned port1 = udev->portnum; + + /* descriptor may appear anywhere in config */ + err = __usb_get_extra_descriptor(udev->rawdescriptors[0], + le16_to_cpu(udev->config[0].desc.wTotalLength), + USB_DT_OTG, (void **) &desc, sizeof(*desc)); + if (err || !(desc->bmAttributes & USB_OTG_HNP)) + return 0; + + dev_info(&udev->dev, "Dual-Role OTG device on %sHNP port\n", + (port1 == bus->otg_port) ? "" : "non-"); + + /* enable HNP before suspend, it's simpler */ + if (port1 == bus->otg_port) { + bus->b_hnp_enable = 1; + err = usb_control_msg(udev, + usb_sndctrlpipe(udev, 0), + USB_REQ_SET_FEATURE, 0, + USB_DEVICE_B_HNP_ENABLE, + 0, NULL, 0, + USB_CTRL_SET_TIMEOUT); + if (err < 0) { + /* + * OTG MESSAGE: report errors here, + * customize to match your product. + */ + dev_err(&udev->dev, "can't set HNP mode: %d\n", + err); + bus->b_hnp_enable = 0; + } + } else if (desc->bLength == sizeof + (struct usb_otg_descriptor)) { + /* Set a_alt_hnp_support for legacy otg device */ + err = usb_control_msg(udev, + usb_sndctrlpipe(udev, 0), + USB_REQ_SET_FEATURE, 0, + USB_DEVICE_A_ALT_HNP_SUPPORT, + 0, NULL, 0, + USB_CTRL_SET_TIMEOUT); + if (err < 0) + dev_err(&udev->dev, + "set a_alt_hnp_support failed: %d\n", + err); + } + } +#endif + return err; +} + + +/** + * usb_enumerate_device - Read device configs/intfs/otg (usbcore-internal) + * @udev: newly addressed device (in ADDRESS state) + * + * This is only called by usb_new_device() -- all comments that apply there + * apply here wrt to environment. + * + * If the device is WUSB and not authorized, we don't attempt to read + * the string descriptors, as they will be errored out by the device + * until it has been authorized. + * + * Return: 0 if successful. A negative error code otherwise. + */ +static int usb_enumerate_device(struct usb_device *udev) +{ + int err; + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + + if (udev->config == NULL) { + err = usb_get_configuration(udev); + if (err < 0) { + if (err != -ENODEV) + dev_err(&udev->dev, "can't read configurations, error %d\n", + err); + return err; + } + } + + /* read the standard strings and cache them if present */ + udev->product = usb_cache_string(udev, udev->descriptor.iProduct); + udev->manufacturer = usb_cache_string(udev, + udev->descriptor.iManufacturer); + udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber); + + err = usb_enumerate_device_otg(udev); + if (err < 0) + return err; + + if (IS_ENABLED(CONFIG_USB_OTG_PRODUCTLIST) && hcd->tpl_support && + !is_targeted(udev)) { + /* Maybe it can talk to us, though we can't talk to it. + * (Includes HNP test device.) + */ + if (IS_ENABLED(CONFIG_USB_OTG) && (udev->bus->b_hnp_enable + || udev->bus->is_b_host)) { + err = usb_port_suspend(udev, PMSG_AUTO_SUSPEND); + if (err < 0) + dev_dbg(&udev->dev, "HNP fail, %d\n", err); + } + return -ENOTSUPP; + } + + usb_detect_interface_quirks(udev); + + return 0; +} + +static void set_usb_port_removable(struct usb_device *udev) +{ + struct usb_device *hdev = udev->parent; + struct usb_hub *hub; + u8 port = udev->portnum; + u16 wHubCharacteristics; + bool removable = true; + + dev_set_removable(&udev->dev, DEVICE_REMOVABLE_UNKNOWN); + + if (!hdev) + return; + + hub = usb_hub_to_struct_hub(udev->parent); + + /* + * If the platform firmware has provided information about a port, + * use that to determine whether it's removable. + */ + switch (hub->ports[udev->portnum - 1]->connect_type) { + case USB_PORT_CONNECT_TYPE_HOT_PLUG: + dev_set_removable(&udev->dev, DEVICE_REMOVABLE); + return; + case USB_PORT_CONNECT_TYPE_HARD_WIRED: + case USB_PORT_NOT_USED: + dev_set_removable(&udev->dev, DEVICE_FIXED); + return; + default: + break; + } + + /* + * Otherwise, check whether the hub knows whether a port is removable + * or not + */ + wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics); + + if (!(wHubCharacteristics & HUB_CHAR_COMPOUND)) + return; + + if (hub_is_superspeed(hdev)) { + if (le16_to_cpu(hub->descriptor->u.ss.DeviceRemovable) + & (1 << port)) + removable = false; + } else { + if (hub->descriptor->u.hs.DeviceRemovable[port / 8] & (1 << (port % 8))) + removable = false; + } + + if (removable) + dev_set_removable(&udev->dev, DEVICE_REMOVABLE); + else + dev_set_removable(&udev->dev, DEVICE_FIXED); + +} + +/** + * usb_new_device - perform initial device setup (usbcore-internal) + * @udev: newly addressed device (in ADDRESS state) + * + * This is called with devices which have been detected but not fully + * enumerated. The device descriptor is available, but not descriptors + * for any device configuration. The caller must have locked either + * the parent hub (if udev is a normal device) or else the + * usb_bus_idr_lock (if udev is a root hub). The parent's pointer to + * udev has already been installed, but udev is not yet visible through + * sysfs or other filesystem code. + * + * This call is synchronous, and may not be used in an interrupt context. + * + * Only the hub driver or root-hub registrar should ever call this. + * + * Return: Whether the device is configured properly or not. Zero if the + * interface was registered with the driver core; else a negative errno + * value. + * + */ +int usb_new_device(struct usb_device *udev) +{ + int err; + + if (udev->parent) { + /* Initialize non-root-hub device wakeup to disabled; + * device (un)configuration controls wakeup capable + * sysfs power/wakeup controls wakeup enabled/disabled + */ + device_init_wakeup(&udev->dev, 0); + } + + /* Tell the runtime-PM framework the device is active */ + pm_runtime_set_active(&udev->dev); + pm_runtime_get_noresume(&udev->dev); + pm_runtime_use_autosuspend(&udev->dev); + pm_runtime_enable(&udev->dev); + + /* By default, forbid autosuspend for all devices. It will be + * allowed for hubs during binding. + */ + usb_disable_autosuspend(udev); + + err = usb_enumerate_device(udev); /* Read descriptors */ + if (err < 0) + goto fail; + dev_dbg(&udev->dev, "udev %d, busnum %d, minor = %d\n", + udev->devnum, udev->bus->busnum, + (((udev->bus->busnum-1) * 128) + (udev->devnum-1))); + /* export the usbdev device-node for libusb */ + udev->dev.devt = MKDEV(USB_DEVICE_MAJOR, + (((udev->bus->busnum-1) * 128) + (udev->devnum-1))); + + /* Tell the world! */ + announce_device(udev); + + if (udev->serial) + add_device_randomness(udev->serial, strlen(udev->serial)); + if (udev->product) + add_device_randomness(udev->product, strlen(udev->product)); + if (udev->manufacturer) + add_device_randomness(udev->manufacturer, + strlen(udev->manufacturer)); + + device_enable_async_suspend(&udev->dev); + + /* check whether the hub or firmware marks this port as non-removable */ + set_usb_port_removable(udev); + + /* Register the device. The device driver is responsible + * for configuring the device and invoking the add-device + * notifier chain (used by usbfs and possibly others). + */ + err = device_add(&udev->dev); + if (err) { + dev_err(&udev->dev, "can't device_add, error %d\n", err); + goto fail; + } + + /* Create link files between child device and usb port device. */ + if (udev->parent) { + struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent); + int port1 = udev->portnum; + struct usb_port *port_dev = hub->ports[port1 - 1]; + + err = sysfs_create_link(&udev->dev.kobj, + &port_dev->dev.kobj, "port"); + if (err) + goto fail; + + err = sysfs_create_link(&port_dev->dev.kobj, + &udev->dev.kobj, "device"); + if (err) { + sysfs_remove_link(&udev->dev.kobj, "port"); + goto fail; + } + + if (!test_and_set_bit(port1, hub->child_usage_bits)) + pm_runtime_get_sync(&port_dev->dev); + } + + (void) usb_create_ep_devs(&udev->dev, &udev->ep0, udev); + usb_mark_last_busy(udev); + pm_runtime_put_sync_autosuspend(&udev->dev); + return err; + +fail: + usb_set_device_state(udev, USB_STATE_NOTATTACHED); + pm_runtime_disable(&udev->dev); + pm_runtime_set_suspended(&udev->dev); + return err; +} + + +/** + * usb_deauthorize_device - deauthorize a device (usbcore-internal) + * @usb_dev: USB device + * + * Move the USB device to a very basic state where interfaces are disabled + * and the device is in fact unconfigured and unusable. + * + * We share a lock (that we have) with device_del(), so we need to + * defer its call. + * + * Return: 0. + */ +int usb_deauthorize_device(struct usb_device *usb_dev) +{ + usb_lock_device(usb_dev); + if (usb_dev->authorized == 0) + goto out_unauthorized; + + usb_dev->authorized = 0; + usb_set_configuration(usb_dev, -1); + +out_unauthorized: + usb_unlock_device(usb_dev); + return 0; +} + + +int usb_authorize_device(struct usb_device *usb_dev) +{ + int result = 0, c; + + usb_lock_device(usb_dev); + if (usb_dev->authorized == 1) + goto out_authorized; + + result = usb_autoresume_device(usb_dev); + if (result < 0) { + dev_err(&usb_dev->dev, + "can't autoresume for authorization: %d\n", result); + goto error_autoresume; + } + + if (usb_dev->wusb) { + struct usb_device_descriptor *descr; + + descr = usb_get_device_descriptor(usb_dev); + if (IS_ERR(descr)) { + result = PTR_ERR(descr); + dev_err(&usb_dev->dev, "can't re-read device descriptor for " + "authorization: %d\n", result); + goto error_device_descriptor; + } + usb_dev->descriptor = *descr; + kfree(descr); + } + + usb_dev->authorized = 1; + /* Choose and set the configuration. This registers the interfaces + * with the driver core and lets interface drivers bind to them. + */ + c = usb_choose_configuration(usb_dev); + if (c >= 0) { + result = usb_set_configuration(usb_dev, c); + if (result) { + dev_err(&usb_dev->dev, + "can't set config #%d, error %d\n", c, result); + /* This need not be fatal. The user can try to + * set other configurations. */ + } + } + dev_info(&usb_dev->dev, "authorized to connect\n"); + +error_device_descriptor: + usb_autosuspend_device(usb_dev); +error_autoresume: +out_authorized: + usb_unlock_device(usb_dev); /* complements locktree */ + return result; +} + +/** + * get_port_ssp_rate - Match the extended port status to SSP rate + * @hdev: The hub device + * @ext_portstatus: extended port status + * + * Match the extended port status speed id to the SuperSpeed Plus sublink speed + * capability attributes. Base on the number of connected lanes and speed, + * return the corresponding enum usb_ssp_rate. + */ +static enum usb_ssp_rate get_port_ssp_rate(struct usb_device *hdev, + u32 ext_portstatus) +{ + struct usb_ssp_cap_descriptor *ssp_cap; + u32 attr; + u8 speed_id; + u8 ssac; + u8 lanes; + int i; + + if (!hdev->bos) + goto out; + + ssp_cap = hdev->bos->ssp_cap; + if (!ssp_cap) + goto out; + + speed_id = ext_portstatus & USB_EXT_PORT_STAT_RX_SPEED_ID; + lanes = USB_EXT_PORT_RX_LANES(ext_portstatus) + 1; + + ssac = le32_to_cpu(ssp_cap->bmAttributes) & + USB_SSP_SUBLINK_SPEED_ATTRIBS; + + for (i = 0; i <= ssac; i++) { + u8 ssid; + + attr = le32_to_cpu(ssp_cap->bmSublinkSpeedAttr[i]); + ssid = FIELD_GET(USB_SSP_SUBLINK_SPEED_SSID, attr); + if (speed_id == ssid) { + u16 mantissa; + u8 lse; + u8 type; + + /* + * Note: currently asymmetric lane types are only + * applicable for SSIC operate in SuperSpeed protocol + */ + type = FIELD_GET(USB_SSP_SUBLINK_SPEED_ST, attr); + if (type == USB_SSP_SUBLINK_SPEED_ST_ASYM_RX || + type == USB_SSP_SUBLINK_SPEED_ST_ASYM_TX) + goto out; + + if (FIELD_GET(USB_SSP_SUBLINK_SPEED_LP, attr) != + USB_SSP_SUBLINK_SPEED_LP_SSP) + goto out; + + lse = FIELD_GET(USB_SSP_SUBLINK_SPEED_LSE, attr); + mantissa = FIELD_GET(USB_SSP_SUBLINK_SPEED_LSM, attr); + + /* Convert to Gbps */ + for (; lse < USB_SSP_SUBLINK_SPEED_LSE_GBPS; lse++) + mantissa /= 1000; + + if (mantissa >= 10 && lanes == 1) + return USB_SSP_GEN_2x1; + + if (mantissa >= 10 && lanes == 2) + return USB_SSP_GEN_2x2; + + if (mantissa >= 5 && lanes == 2) + return USB_SSP_GEN_1x2; + + goto out; + } + } + +out: + return USB_SSP_GEN_UNKNOWN; +} + +/* Returns 1 if @hub is a WUSB root hub, 0 otherwise */ +static unsigned hub_is_wusb(struct usb_hub *hub) +{ + struct usb_hcd *hcd; + if (hub->hdev->parent != NULL) /* not a root hub? */ + return 0; + hcd = bus_to_hcd(hub->hdev->bus); + return hcd->wireless; +} + + +#ifdef CONFIG_USB_FEW_INIT_RETRIES +#define PORT_RESET_TRIES 2 +#define SET_ADDRESS_TRIES 1 +#define GET_DESCRIPTOR_TRIES 1 +#define GET_MAXPACKET0_TRIES 1 +#define PORT_INIT_TRIES 4 + +#else +#define PORT_RESET_TRIES 5 +#define SET_ADDRESS_TRIES 2 +#define GET_DESCRIPTOR_TRIES 2 +#define GET_MAXPACKET0_TRIES 3 +#define PORT_INIT_TRIES 4 +#endif /* CONFIG_USB_FEW_INIT_RETRIES */ + +#define DETECT_DISCONNECT_TRIES 5 + +#define HUB_ROOT_RESET_TIME 60 /* times are in msec */ +#define HUB_SHORT_RESET_TIME 10 +#define HUB_BH_RESET_TIME 50 +#define HUB_LONG_RESET_TIME 200 +#define HUB_RESET_TIMEOUT 800 + +static bool use_new_scheme(struct usb_device *udev, int retry, + struct usb_port *port_dev) +{ + int old_scheme_first_port = + (port_dev->quirks & USB_PORT_QUIRK_OLD_SCHEME) || + old_scheme_first; + + /* + * "New scheme" enumeration causes an extra state transition to be + * exposed to an xhci host and causes USB3 devices to receive control + * commands in the default state. This has been seen to cause + * enumeration failures, so disable this enumeration scheme for USB3 + * devices. + */ + if (udev->speed >= USB_SPEED_SUPER) + return false; + + /* + * If use_both_schemes is set, use the first scheme (whichever + * it is) for the larger half of the retries, then use the other + * scheme. Otherwise, use the first scheme for all the retries. + */ + if (use_both_schemes && retry >= (PORT_INIT_TRIES + 1) / 2) + return old_scheme_first_port; /* Second half */ + return !old_scheme_first_port; /* First half or all */ +} + +/* Is a USB 3.0 port in the Inactive or Compliance Mode state? + * Port warm reset is required to recover + */ +static bool hub_port_warm_reset_required(struct usb_hub *hub, int port1, + u16 portstatus) +{ + u16 link_state; + + if (!hub_is_superspeed(hub->hdev)) + return false; + + if (test_bit(port1, hub->warm_reset_bits)) + return true; + + link_state = portstatus & USB_PORT_STAT_LINK_STATE; + return link_state == USB_SS_PORT_LS_SS_INACTIVE + || link_state == USB_SS_PORT_LS_COMP_MOD; +} + +static int hub_port_wait_reset(struct usb_hub *hub, int port1, + struct usb_device *udev, unsigned int delay, bool warm) +{ + int delay_time, ret; + u16 portstatus; + u16 portchange; + u32 ext_portstatus = 0; + + for (delay_time = 0; + delay_time < HUB_RESET_TIMEOUT; + delay_time += delay) { + /* wait to give the device a chance to reset */ + msleep(delay); + + /* read and decode port status */ + if (hub_is_superspeedplus(hub->hdev)) + ret = hub_ext_port_status(hub, port1, + HUB_EXT_PORT_STATUS, + &portstatus, &portchange, + &ext_portstatus); + else + ret = usb_hub_port_status(hub, port1, &portstatus, + &portchange); + if (ret < 0) + return ret; + + /* + * The port state is unknown until the reset completes. + * + * On top of that, some chips may require additional time + * to re-establish a connection after the reset is complete, + * so also wait for the connection to be re-established. + */ + if (!(portstatus & USB_PORT_STAT_RESET) && + (portstatus & USB_PORT_STAT_CONNECTION)) + break; + + /* switch to the long delay after two short delay failures */ + if (delay_time >= 2 * HUB_SHORT_RESET_TIME) + delay = HUB_LONG_RESET_TIME; + + dev_dbg(&hub->ports[port1 - 1]->dev, + "not %sreset yet, waiting %dms\n", + warm ? "warm " : "", delay); + } + + if ((portstatus & USB_PORT_STAT_RESET)) + return -EBUSY; + + if (hub_port_warm_reset_required(hub, port1, portstatus)) + return -ENOTCONN; + + /* Device went away? */ + if (!(portstatus & USB_PORT_STAT_CONNECTION)) + return -ENOTCONN; + + /* Retry if connect change is set but status is still connected. + * A USB 3.0 connection may bounce if multiple warm resets were issued, + * but the device may have successfully re-connected. Ignore it. + */ + if (!hub_is_superspeed(hub->hdev) && + (portchange & USB_PORT_STAT_C_CONNECTION)) { + usb_clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_CONNECTION); + return -EAGAIN; + } + + if (!(portstatus & USB_PORT_STAT_ENABLE)) + return -EBUSY; + + if (!udev) + return 0; + + if (hub_is_superspeedplus(hub->hdev)) { + /* extended portstatus Rx and Tx lane count are zero based */ + udev->rx_lanes = USB_EXT_PORT_RX_LANES(ext_portstatus) + 1; + udev->tx_lanes = USB_EXT_PORT_TX_LANES(ext_portstatus) + 1; + udev->ssp_rate = get_port_ssp_rate(hub->hdev, ext_portstatus); + } else { + udev->rx_lanes = 1; + udev->tx_lanes = 1; + udev->ssp_rate = USB_SSP_GEN_UNKNOWN; + } + if (hub_is_wusb(hub)) + udev->speed = USB_SPEED_WIRELESS; + else if (udev->ssp_rate != USB_SSP_GEN_UNKNOWN) + udev->speed = USB_SPEED_SUPER_PLUS; + else if (hub_is_superspeed(hub->hdev)) + udev->speed = USB_SPEED_SUPER; + else if (portstatus & USB_PORT_STAT_HIGH_SPEED) + udev->speed = USB_SPEED_HIGH; + else if (portstatus & USB_PORT_STAT_LOW_SPEED) + udev->speed = USB_SPEED_LOW; + else + udev->speed = USB_SPEED_FULL; + return 0; +} + +/* Handle port reset and port warm(BH) reset (for USB3 protocol ports) */ +static int hub_port_reset(struct usb_hub *hub, int port1, + struct usb_device *udev, unsigned int delay, bool warm) +{ + int i, status; + u16 portchange, portstatus; + struct usb_port *port_dev = hub->ports[port1 - 1]; + int reset_recovery_time; + + if (!hub_is_superspeed(hub->hdev)) { + if (warm) { + dev_err(hub->intfdev, "only USB3 hub support " + "warm reset\n"); + return -EINVAL; + } + /* Block EHCI CF initialization during the port reset. + * Some companion controllers don't like it when they mix. + */ + down_read(&ehci_cf_port_reset_rwsem); + } else if (!warm) { + /* + * If the caller hasn't explicitly requested a warm reset, + * double check and see if one is needed. + */ + if (usb_hub_port_status(hub, port1, &portstatus, + &portchange) == 0) + if (hub_port_warm_reset_required(hub, port1, + portstatus)) + warm = true; + } + clear_bit(port1, hub->warm_reset_bits); + + /* Reset the port */ + for (i = 0; i < PORT_RESET_TRIES; i++) { + status = set_port_feature(hub->hdev, port1, (warm ? + USB_PORT_FEAT_BH_PORT_RESET : + USB_PORT_FEAT_RESET)); + if (status == -ENODEV) { + ; /* The hub is gone */ + } else if (status) { + dev_err(&port_dev->dev, + "cannot %sreset (err = %d)\n", + warm ? "warm " : "", status); + } else { + status = hub_port_wait_reset(hub, port1, udev, delay, + warm); + if (status && status != -ENOTCONN && status != -ENODEV) + dev_dbg(hub->intfdev, + "port_wait_reset: err = %d\n", + status); + } + + /* + * Check for disconnect or reset, and bail out after several + * reset attempts to avoid warm reset loop. + */ + if (status == 0 || status == -ENOTCONN || status == -ENODEV || + (status == -EBUSY && i == PORT_RESET_TRIES - 1)) { + usb_clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_RESET); + + if (!hub_is_superspeed(hub->hdev)) + goto done; + + usb_clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_BH_PORT_RESET); + usb_clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_PORT_LINK_STATE); + + if (udev) + usb_clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_CONNECTION); + + /* + * If a USB 3.0 device migrates from reset to an error + * state, re-issue the warm reset. + */ + if (usb_hub_port_status(hub, port1, + &portstatus, &portchange) < 0) + goto done; + + if (!hub_port_warm_reset_required(hub, port1, + portstatus)) + goto done; + + /* + * If the port is in SS.Inactive or Compliance Mode, the + * hot or warm reset failed. Try another warm reset. + */ + if (!warm) { + dev_dbg(&port_dev->dev, + "hot reset failed, warm reset\n"); + warm = true; + } + } + + dev_dbg(&port_dev->dev, + "not enabled, trying %sreset again...\n", + warm ? "warm " : ""); + delay = HUB_LONG_RESET_TIME; + } + + dev_err(&port_dev->dev, "Cannot enable. Maybe the USB cable is bad?\n"); + +done: + if (status == 0) { + if (port_dev->quirks & USB_PORT_QUIRK_FAST_ENUM) + usleep_range(10000, 12000); + else { + /* TRSTRCY = 10 ms; plus some extra */ + reset_recovery_time = 10 + 40; + + /* Hub needs extra delay after resetting its port. */ + if (hub->hdev->quirks & USB_QUIRK_HUB_SLOW_RESET) + reset_recovery_time += 100; + + msleep(reset_recovery_time); + } + + if (udev) { + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + + update_devnum(udev, 0); + /* The xHC may think the device is already reset, + * so ignore the status. + */ + if (hcd->driver->reset_device) + hcd->driver->reset_device(hcd, udev); + + usb_set_device_state(udev, USB_STATE_DEFAULT); + } + } else { + if (udev) + usb_set_device_state(udev, USB_STATE_NOTATTACHED); + } + + if (!hub_is_superspeed(hub->hdev)) + up_read(&ehci_cf_port_reset_rwsem); + + return status; +} + +/* Check if a port is power on */ +int usb_port_is_power_on(struct usb_hub *hub, unsigned int portstatus) +{ + int ret = 0; + + if (hub_is_superspeed(hub->hdev)) { + if (portstatus & USB_SS_PORT_STAT_POWER) + ret = 1; + } else { + if (portstatus & USB_PORT_STAT_POWER) + ret = 1; + } + + return ret; +} + +static void usb_lock_port(struct usb_port *port_dev) + __acquires(&port_dev->status_lock) +{ + mutex_lock(&port_dev->status_lock); + __acquire(&port_dev->status_lock); +} + +static void usb_unlock_port(struct usb_port *port_dev) + __releases(&port_dev->status_lock) +{ + mutex_unlock(&port_dev->status_lock); + __release(&port_dev->status_lock); +} + +#ifdef CONFIG_PM + +/* Check if a port is suspended(USB2.0 port) or in U3 state(USB3.0 port) */ +static int port_is_suspended(struct usb_hub *hub, unsigned portstatus) +{ + int ret = 0; + + if (hub_is_superspeed(hub->hdev)) { + if ((portstatus & USB_PORT_STAT_LINK_STATE) + == USB_SS_PORT_LS_U3) + ret = 1; + } else { + if (portstatus & USB_PORT_STAT_SUSPEND) + ret = 1; + } + + return ret; +} + +/* Determine whether the device on a port is ready for a normal resume, + * is ready for a reset-resume, or should be disconnected. + */ +static int check_port_resume_type(struct usb_device *udev, + struct usb_hub *hub, int port1, + int status, u16 portchange, u16 portstatus) +{ + struct usb_port *port_dev = hub->ports[port1 - 1]; + int retries = 3; + + retry: + /* Is a warm reset needed to recover the connection? */ + if (status == 0 && udev->reset_resume + && hub_port_warm_reset_required(hub, port1, portstatus)) { + /* pass */; + } + /* Is the device still present? */ + else if (status || port_is_suspended(hub, portstatus) || + !usb_port_is_power_on(hub, portstatus)) { + if (status >= 0) + status = -ENODEV; + } else if (!(portstatus & USB_PORT_STAT_CONNECTION)) { + if (retries--) { + usleep_range(200, 300); + status = usb_hub_port_status(hub, port1, &portstatus, + &portchange); + goto retry; + } + status = -ENODEV; + } + + /* Can't do a normal resume if the port isn't enabled, + * so try a reset-resume instead. + */ + else if (!(portstatus & USB_PORT_STAT_ENABLE) && !udev->reset_resume) { + if (udev->persist_enabled) + udev->reset_resume = 1; + else + status = -ENODEV; + } + + if (status) { + dev_dbg(&port_dev->dev, "status %04x.%04x after resume, %d\n", + portchange, portstatus, status); + } else if (udev->reset_resume) { + + /* Late port handoff can set status-change bits */ + if (portchange & USB_PORT_STAT_C_CONNECTION) + usb_clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_CONNECTION); + if (portchange & USB_PORT_STAT_C_ENABLE) + usb_clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_ENABLE); + + /* + * Whatever made this reset-resume necessary may have + * turned on the port1 bit in hub->change_bits. But after + * a successful reset-resume we want the bit to be clear; + * if it was on it would indicate that something happened + * following the reset-resume. + */ + clear_bit(port1, hub->change_bits); + } + + return status; +} + +int usb_disable_ltm(struct usb_device *udev) +{ + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + + /* Check if the roothub and device supports LTM. */ + if (!usb_device_supports_ltm(hcd->self.root_hub) || + !usb_device_supports_ltm(udev)) + return 0; + + /* Clear Feature LTM Enable can only be sent if the device is + * configured. + */ + if (!udev->actconfig) + return 0; + + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE, + USB_DEVICE_LTM_ENABLE, 0, NULL, 0, + USB_CTRL_SET_TIMEOUT); +} +EXPORT_SYMBOL_GPL(usb_disable_ltm); + +void usb_enable_ltm(struct usb_device *udev) +{ + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + + /* Check if the roothub and device supports LTM. */ + if (!usb_device_supports_ltm(hcd->self.root_hub) || + !usb_device_supports_ltm(udev)) + return; + + /* Set Feature LTM Enable can only be sent if the device is + * configured. + */ + if (!udev->actconfig) + return; + + usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + USB_REQ_SET_FEATURE, USB_RECIP_DEVICE, + USB_DEVICE_LTM_ENABLE, 0, NULL, 0, + USB_CTRL_SET_TIMEOUT); +} +EXPORT_SYMBOL_GPL(usb_enable_ltm); + +/* + * usb_enable_remote_wakeup - enable remote wakeup for a device + * @udev: target device + * + * For USB-2 devices: Set the device's remote wakeup feature. + * + * For USB-3 devices: Assume there's only one function on the device and + * enable remote wake for the first interface. FIXME if the interface + * association descriptor shows there's more than one function. + */ +static int usb_enable_remote_wakeup(struct usb_device *udev) +{ + if (udev->speed < USB_SPEED_SUPER) + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + USB_REQ_SET_FEATURE, USB_RECIP_DEVICE, + USB_DEVICE_REMOTE_WAKEUP, 0, NULL, 0, + USB_CTRL_SET_TIMEOUT); + else + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + USB_REQ_SET_FEATURE, USB_RECIP_INTERFACE, + USB_INTRF_FUNC_SUSPEND, + USB_INTRF_FUNC_SUSPEND_RW | + USB_INTRF_FUNC_SUSPEND_LP, + NULL, 0, USB_CTRL_SET_TIMEOUT); +} + +/* + * usb_disable_remote_wakeup - disable remote wakeup for a device + * @udev: target device + * + * For USB-2 devices: Clear the device's remote wakeup feature. + * + * For USB-3 devices: Assume there's only one function on the device and + * disable remote wake for the first interface. FIXME if the interface + * association descriptor shows there's more than one function. + */ +static int usb_disable_remote_wakeup(struct usb_device *udev) +{ + if (udev->speed < USB_SPEED_SUPER) + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE, + USB_DEVICE_REMOTE_WAKEUP, 0, NULL, 0, + USB_CTRL_SET_TIMEOUT); + else + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + USB_REQ_SET_FEATURE, USB_RECIP_INTERFACE, + USB_INTRF_FUNC_SUSPEND, 0, NULL, 0, + USB_CTRL_SET_TIMEOUT); +} + +/* Count of wakeup-enabled devices at or below udev */ +unsigned usb_wakeup_enabled_descendants(struct usb_device *udev) +{ + struct usb_hub *hub = usb_hub_to_struct_hub(udev); + + return udev->do_remote_wakeup + + (hub ? hub->wakeup_enabled_descendants : 0); +} +EXPORT_SYMBOL_GPL(usb_wakeup_enabled_descendants); + +/* + * usb_port_suspend - suspend a usb device's upstream port + * @udev: device that's no longer in active use, not a root hub + * Context: must be able to sleep; device not locked; pm locks held + * + * Suspends a USB device that isn't in active use, conserving power. + * Devices may wake out of a suspend, if anything important happens, + * using the remote wakeup mechanism. They may also be taken out of + * suspend by the host, using usb_port_resume(). It's also routine + * to disconnect devices while they are suspended. + * + * This only affects the USB hardware for a device; its interfaces + * (and, for hubs, child devices) must already have been suspended. + * + * Selective port suspend reduces power; most suspended devices draw + * less than 500 uA. It's also used in OTG, along with remote wakeup. + * All devices below the suspended port are also suspended. + * + * Devices leave suspend state when the host wakes them up. Some devices + * also support "remote wakeup", where the device can activate the USB + * tree above them to deliver data, such as a keypress or packet. In + * some cases, this wakes the USB host. + * + * Suspending OTG devices may trigger HNP, if that's been enabled + * between a pair of dual-role devices. That will change roles, such + * as from A-Host to A-Peripheral or from B-Host back to B-Peripheral. + * + * Devices on USB hub ports have only one "suspend" state, corresponding + * to ACPI D2, "may cause the device to lose some context". + * State transitions include: + * + * - suspend, resume ... when the VBUS power link stays live + * - suspend, disconnect ... VBUS lost + * + * Once VBUS drop breaks the circuit, the port it's using has to go through + * normal re-enumeration procedures, starting with enabling VBUS power. + * Other than re-initializing the hub (plug/unplug, except for root hubs), + * Linux (2.6) currently has NO mechanisms to initiate that: no hub_wq + * timer, no SRP, no requests through sysfs. + * + * If Runtime PM isn't enabled or used, non-SuperSpeed devices may not get + * suspended until their bus goes into global suspend (i.e., the root + * hub is suspended). Nevertheless, we change @udev->state to + * USB_STATE_SUSPENDED as this is the device's "logical" state. The actual + * upstream port setting is stored in @udev->port_is_suspended. + * + * Returns 0 on success, else negative errno. + */ +int usb_port_suspend(struct usb_device *udev, pm_message_t msg) +{ + struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent); + struct usb_port *port_dev = hub->ports[udev->portnum - 1]; + int port1 = udev->portnum; + int status; + bool really_suspend = true; + + usb_lock_port(port_dev); + + /* enable remote wakeup when appropriate; this lets the device + * wake up the upstream hub (including maybe the root hub). + * + * NOTE: OTG devices may issue remote wakeup (or SRP) even when + * we don't explicitly enable it here. + */ + if (udev->do_remote_wakeup) { + status = usb_enable_remote_wakeup(udev); + if (status) { + dev_dbg(&udev->dev, "won't remote wakeup, status %d\n", + status); + /* bail if autosuspend is requested */ + if (PMSG_IS_AUTO(msg)) + goto err_wakeup; + } + } + + /* disable USB2 hardware LPM */ + usb_disable_usb2_hardware_lpm(udev); + + if (usb_disable_ltm(udev)) { + dev_err(&udev->dev, "Failed to disable LTM before suspend\n"); + status = -ENOMEM; + if (PMSG_IS_AUTO(msg)) + goto err_ltm; + } + + /* see 7.1.7.6 */ + if (hub_is_superspeed(hub->hdev)) + status = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_U3); + + /* + * For system suspend, we do not need to enable the suspend feature + * on individual USB-2 ports. The devices will automatically go + * into suspend a few ms after the root hub stops sending packets. + * The USB 2.0 spec calls this "global suspend". + * + * However, many USB hubs have a bug: They don't relay wakeup requests + * from a downstream port if the port's suspend feature isn't on. + * Therefore we will turn on the suspend feature if udev or any of its + * descendants is enabled for remote wakeup. + */ + else if (PMSG_IS_AUTO(msg) || usb_wakeup_enabled_descendants(udev) > 0) + status = set_port_feature(hub->hdev, port1, + USB_PORT_FEAT_SUSPEND); + else { + really_suspend = false; + status = 0; + } + if (status) { + /* Check if the port has been suspended for the timeout case + * to prevent the suspended port from incorrect handling. + */ + if (status == -ETIMEDOUT) { + int ret; + u16 portstatus, portchange; + + portstatus = portchange = 0; + ret = usb_hub_port_status(hub, port1, &portstatus, + &portchange); + + dev_dbg(&port_dev->dev, + "suspend timeout, status %04x\n", portstatus); + + if (ret == 0 && port_is_suspended(hub, portstatus)) { + status = 0; + goto suspend_done; + } + } + + dev_dbg(&port_dev->dev, "can't suspend, status %d\n", status); + + /* Try to enable USB3 LTM again */ + usb_enable_ltm(udev); + err_ltm: + /* Try to enable USB2 hardware LPM again */ + usb_enable_usb2_hardware_lpm(udev); + + if (udev->do_remote_wakeup) + (void) usb_disable_remote_wakeup(udev); + err_wakeup: + + /* System sleep transitions should never fail */ + if (!PMSG_IS_AUTO(msg)) + status = 0; + } else { + suspend_done: + dev_dbg(&udev->dev, "usb %ssuspend, wakeup %d\n", + (PMSG_IS_AUTO(msg) ? "auto-" : ""), + udev->do_remote_wakeup); + if (really_suspend) { + udev->port_is_suspended = 1; + + /* device has up to 10 msec to fully suspend */ + msleep(10); + } + usb_set_device_state(udev, USB_STATE_SUSPENDED); + } + + if (status == 0 && !udev->do_remote_wakeup && udev->persist_enabled + && test_and_clear_bit(port1, hub->child_usage_bits)) + pm_runtime_put_sync(&port_dev->dev); + + usb_mark_last_busy(hub->hdev); + + usb_unlock_port(port_dev); + return status; +} + +/* + * If the USB "suspend" state is in use (rather than "global suspend"), + * many devices will be individually taken out of suspend state using + * special "resume" signaling. This routine kicks in shortly after + * hardware resume signaling is finished, either because of selective + * resume (by host) or remote wakeup (by device) ... now see what changed + * in the tree that's rooted at this device. + * + * If @udev->reset_resume is set then the device is reset before the + * status check is done. + */ +static int finish_port_resume(struct usb_device *udev) +{ + int status = 0; + u16 devstatus = 0; + + /* caller owns the udev device lock */ + dev_dbg(&udev->dev, "%s\n", + udev->reset_resume ? "finish reset-resume" : "finish resume"); + + /* usb ch9 identifies four variants of SUSPENDED, based on what + * state the device resumes to. Linux currently won't see the + * first two on the host side; they'd be inside hub_port_init() + * during many timeouts, but hub_wq can't suspend until later. + */ + usb_set_device_state(udev, udev->actconfig + ? USB_STATE_CONFIGURED + : USB_STATE_ADDRESS); + + /* 10.5.4.5 says not to reset a suspended port if the attached + * device is enabled for remote wakeup. Hence the reset + * operation is carried out here, after the port has been + * resumed. + */ + if (udev->reset_resume) { + /* + * If the device morphs or switches modes when it is reset, + * we don't want to perform a reset-resume. We'll fail the + * resume, which will cause a logical disconnect, and then + * the device will be rediscovered. + */ + retry_reset_resume: + if (udev->quirks & USB_QUIRK_RESET) + status = -ENODEV; + else + status = usb_reset_and_verify_device(udev); + } + + /* 10.5.4.5 says be sure devices in the tree are still there. + * For now let's assume the device didn't go crazy on resume, + * and device drivers will know about any resume quirks. + */ + if (status == 0) { + devstatus = 0; + status = usb_get_std_status(udev, USB_RECIP_DEVICE, 0, &devstatus); + + /* If a normal resume failed, try doing a reset-resume */ + if (status && !udev->reset_resume && udev->persist_enabled) { + dev_dbg(&udev->dev, "retry with reset-resume\n"); + udev->reset_resume = 1; + goto retry_reset_resume; + } + } + + if (status) { + dev_dbg(&udev->dev, "gone after usb resume? status %d\n", + status); + /* + * There are a few quirky devices which violate the standard + * by claiming to have remote wakeup enabled after a reset, + * which crash if the feature is cleared, hence check for + * udev->reset_resume + */ + } else if (udev->actconfig && !udev->reset_resume) { + if (udev->speed < USB_SPEED_SUPER) { + if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) + status = usb_disable_remote_wakeup(udev); + } else { + status = usb_get_std_status(udev, USB_RECIP_INTERFACE, 0, + &devstatus); + if (!status && devstatus & (USB_INTRF_STAT_FUNC_RW_CAP + | USB_INTRF_STAT_FUNC_RW)) + status = usb_disable_remote_wakeup(udev); + } + + if (status) + dev_dbg(&udev->dev, + "disable remote wakeup, status %d\n", + status); + status = 0; + } + return status; +} + +/* + * There are some SS USB devices which take longer time for link training. + * XHCI specs 4.19.4 says that when Link training is successful, port + * sets CCS bit to 1. So if SW reads port status before successful link + * training, then it will not find device to be present. + * USB Analyzer log with such buggy devices show that in some cases + * device switch on the RX termination after long delay of host enabling + * the VBUS. In few other cases it has been seen that device fails to + * negotiate link training in first attempt. It has been + * reported till now that few devices take as long as 2000 ms to train + * the link after host enabling its VBUS and termination. Following + * routine implements a 2000 ms timeout for link training. If in a case + * link trains before timeout, loop will exit earlier. + * + * There are also some 2.0 hard drive based devices and 3.0 thumb + * drives that, when plugged into a 2.0 only port, take a long + * time to set CCS after VBUS enable. + * + * FIXME: If a device was connected before suspend, but was removed + * while system was asleep, then the loop in the following routine will + * only exit at timeout. + * + * This routine should only be called when persist is enabled. + */ +static int wait_for_connected(struct usb_device *udev, + struct usb_hub *hub, int port1, + u16 *portchange, u16 *portstatus) +{ + int status = 0, delay_ms = 0; + + while (delay_ms < 2000) { + if (status || *portstatus & USB_PORT_STAT_CONNECTION) + break; + if (!usb_port_is_power_on(hub, *portstatus)) { + status = -ENODEV; + break; + } + msleep(20); + delay_ms += 20; + status = usb_hub_port_status(hub, port1, portstatus, portchange); + } + dev_dbg(&udev->dev, "Waited %dms for CONNECT\n", delay_ms); + return status; +} + +/* + * usb_port_resume - re-activate a suspended usb device's upstream port + * @udev: device to re-activate, not a root hub + * Context: must be able to sleep; device not locked; pm locks held + * + * This will re-activate the suspended device, increasing power usage + * while letting drivers communicate again with its endpoints. + * USB resume explicitly guarantees that the power session between + * the host and the device is the same as it was when the device + * suspended. + * + * If @udev->reset_resume is set then this routine won't check that the + * port is still enabled. Furthermore, finish_port_resume() above will + * reset @udev. The end result is that a broken power session can be + * recovered and @udev will appear to persist across a loss of VBUS power. + * + * For example, if a host controller doesn't maintain VBUS suspend current + * during a system sleep or is reset when the system wakes up, all the USB + * power sessions below it will be broken. This is especially troublesome + * for mass-storage devices containing mounted filesystems, since the + * device will appear to have disconnected and all the memory mappings + * to it will be lost. Using the USB_PERSIST facility, the device can be + * made to appear as if it had not disconnected. + * + * This facility can be dangerous. Although usb_reset_and_verify_device() makes + * every effort to insure that the same device is present after the + * reset as before, it cannot provide a 100% guarantee. Furthermore it's + * quite possible for a device to remain unaltered but its media to be + * changed. If the user replaces a flash memory card while the system is + * asleep, he will have only himself to blame when the filesystem on the + * new card is corrupted and the system crashes. + * + * Returns 0 on success, else negative errno. + */ +int usb_port_resume(struct usb_device *udev, pm_message_t msg) +{ + struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent); + struct usb_port *port_dev = hub->ports[udev->portnum - 1]; + int port1 = udev->portnum; + int status; + u16 portchange, portstatus; + + if (!test_and_set_bit(port1, hub->child_usage_bits)) { + status = pm_runtime_resume_and_get(&port_dev->dev); + if (status < 0) { + dev_dbg(&udev->dev, "can't resume usb port, status %d\n", + status); + return status; + } + } + + usb_lock_port(port_dev); + + /* Skip the initial Clear-Suspend step for a remote wakeup */ + status = usb_hub_port_status(hub, port1, &portstatus, &portchange); + if (status == 0 && !port_is_suspended(hub, portstatus)) { + if (portchange & USB_PORT_STAT_C_SUSPEND) + pm_wakeup_event(&udev->dev, 0); + goto SuspendCleared; + } + + /* see 7.1.7.7; affects power usage, but not budgeting */ + if (hub_is_superspeed(hub->hdev)) + status = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_U0); + else + status = usb_clear_port_feature(hub->hdev, + port1, USB_PORT_FEAT_SUSPEND); + if (status) { + dev_dbg(&port_dev->dev, "can't resume, status %d\n", status); + } else { + /* drive resume for USB_RESUME_TIMEOUT msec */ + dev_dbg(&udev->dev, "usb %sresume\n", + (PMSG_IS_AUTO(msg) ? "auto-" : "")); + msleep(USB_RESUME_TIMEOUT); + + /* Virtual root hubs can trigger on GET_PORT_STATUS to + * stop resume signaling. Then finish the resume + * sequence. + */ + status = usb_hub_port_status(hub, port1, &portstatus, &portchange); + } + + SuspendCleared: + if (status == 0) { + udev->port_is_suspended = 0; + if (hub_is_superspeed(hub->hdev)) { + if (portchange & USB_PORT_STAT_C_LINK_STATE) + usb_clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_PORT_LINK_STATE); + } else { + if (portchange & USB_PORT_STAT_C_SUSPEND) + usb_clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_SUSPEND); + } + + /* TRSMRCY = 10 msec */ + msleep(10); + } + + if (udev->persist_enabled) + status = wait_for_connected(udev, hub, port1, &portchange, + &portstatus); + + status = check_port_resume_type(udev, + hub, port1, status, portchange, portstatus); + if (status == 0) + status = finish_port_resume(udev); + if (status < 0) { + dev_dbg(&udev->dev, "can't resume, status %d\n", status); + hub_port_logical_disconnect(hub, port1); + } else { + /* Try to enable USB2 hardware LPM */ + usb_enable_usb2_hardware_lpm(udev); + + /* Try to enable USB3 LTM */ + usb_enable_ltm(udev); + } + + usb_unlock_port(port_dev); + + return status; +} + +int usb_remote_wakeup(struct usb_device *udev) +{ + int status = 0; + + usb_lock_device(udev); + if (udev->state == USB_STATE_SUSPENDED) { + dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-"); + status = usb_autoresume_device(udev); + if (status == 0) { + /* Let the drivers do their thing, then... */ + usb_autosuspend_device(udev); + } + } + usb_unlock_device(udev); + return status; +} + +/* Returns 1 if there was a remote wakeup and a connect status change. */ +static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port, + u16 portstatus, u16 portchange) + __must_hold(&port_dev->status_lock) +{ + struct usb_port *port_dev = hub->ports[port - 1]; + struct usb_device *hdev; + struct usb_device *udev; + int connect_change = 0; + u16 link_state; + int ret; + + hdev = hub->hdev; + udev = port_dev->child; + if (!hub_is_superspeed(hdev)) { + if (!(portchange & USB_PORT_STAT_C_SUSPEND)) + return 0; + usb_clear_port_feature(hdev, port, USB_PORT_FEAT_C_SUSPEND); + } else { + link_state = portstatus & USB_PORT_STAT_LINK_STATE; + if (!udev || udev->state != USB_STATE_SUSPENDED || + (link_state != USB_SS_PORT_LS_U0 && + link_state != USB_SS_PORT_LS_U1 && + link_state != USB_SS_PORT_LS_U2)) + return 0; + } + + if (udev) { + /* TRSMRCY = 10 msec */ + msleep(10); + + usb_unlock_port(port_dev); + ret = usb_remote_wakeup(udev); + usb_lock_port(port_dev); + if (ret < 0) + connect_change = 1; + } else { + ret = -ENODEV; + hub_port_disable(hub, port, 1); + } + dev_dbg(&port_dev->dev, "resume, status %d\n", ret); + return connect_change; +} + +static int check_ports_changed(struct usb_hub *hub) +{ + int port1; + + for (port1 = 1; port1 <= hub->hdev->maxchild; ++port1) { + u16 portstatus, portchange; + int status; + + status = usb_hub_port_status(hub, port1, &portstatus, &portchange); + if (!status && portchange) + return 1; + } + return 0; +} + +static int hub_suspend(struct usb_interface *intf, pm_message_t msg) +{ + struct usb_hub *hub = usb_get_intfdata(intf); + struct usb_device *hdev = hub->hdev; + unsigned port1; + + /* + * Warn if children aren't already suspended. + * Also, add up the number of wakeup-enabled descendants. + */ + hub->wakeup_enabled_descendants = 0; + for (port1 = 1; port1 <= hdev->maxchild; port1++) { + struct usb_port *port_dev = hub->ports[port1 - 1]; + struct usb_device *udev = port_dev->child; + + if (udev && udev->can_submit) { + dev_warn(&port_dev->dev, "device %s not suspended yet\n", + dev_name(&udev->dev)); + if (PMSG_IS_AUTO(msg)) + return -EBUSY; + } + if (udev) + hub->wakeup_enabled_descendants += + usb_wakeup_enabled_descendants(udev); + } + + if (hdev->do_remote_wakeup && hub->quirk_check_port_auto_suspend) { + /* check if there are changes pending on hub ports */ + if (check_ports_changed(hub)) { + if (PMSG_IS_AUTO(msg)) + return -EBUSY; + pm_wakeup_event(&hdev->dev, 2000); + } + } + + if (hub_is_superspeed(hdev) && hdev->do_remote_wakeup) { + /* Enable hub to send remote wakeup for all ports. */ + for (port1 = 1; port1 <= hdev->maxchild; port1++) { + set_port_feature(hdev, + port1 | + USB_PORT_FEAT_REMOTE_WAKE_CONNECT | + USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT | + USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT, + USB_PORT_FEAT_REMOTE_WAKE_MASK); + } + } + + dev_dbg(&intf->dev, "%s\n", __func__); + + /* stop hub_wq and related activity */ + hub_quiesce(hub, HUB_SUSPEND); + return 0; +} + +/* Report wakeup requests from the ports of a resuming root hub */ +static void report_wakeup_requests(struct usb_hub *hub) +{ + struct usb_device *hdev = hub->hdev; + struct usb_device *udev; + struct usb_hcd *hcd; + unsigned long resuming_ports; + int i; + + if (hdev->parent) + return; /* Not a root hub */ + + hcd = bus_to_hcd(hdev->bus); + if (hcd->driver->get_resuming_ports) { + + /* + * The get_resuming_ports() method returns a bitmap (origin 0) + * of ports which have started wakeup signaling but have not + * yet finished resuming. During system resume we will + * resume all the enabled ports, regardless of any wakeup + * signals, which means the wakeup requests would be lost. + * To prevent this, report them to the PM core here. + */ + resuming_ports = hcd->driver->get_resuming_ports(hcd); + for (i = 0; i < hdev->maxchild; ++i) { + if (test_bit(i, &resuming_ports)) { + udev = hub->ports[i]->child; + if (udev) + pm_wakeup_event(&udev->dev, 0); + } + } + } +} + +static int hub_resume(struct usb_interface *intf) +{ + struct usb_hub *hub = usb_get_intfdata(intf); + + dev_dbg(&intf->dev, "%s\n", __func__); + hub_activate(hub, HUB_RESUME); + + /* + * This should be called only for system resume, not runtime resume. + * We can't tell the difference here, so some wakeup requests will be + * reported at the wrong time or more than once. This shouldn't + * matter much, so long as they do get reported. + */ + report_wakeup_requests(hub); + return 0; +} + +static int hub_reset_resume(struct usb_interface *intf) +{ + struct usb_hub *hub = usb_get_intfdata(intf); + + dev_dbg(&intf->dev, "%s\n", __func__); + hub_activate(hub, HUB_RESET_RESUME); + return 0; +} + +/** + * usb_root_hub_lost_power - called by HCD if the root hub lost Vbus power + * @rhdev: struct usb_device for the root hub + * + * The USB host controller driver calls this function when its root hub + * is resumed and Vbus power has been interrupted or the controller + * has been reset. The routine marks @rhdev as having lost power. + * When the hub driver is resumed it will take notice and carry out + * power-session recovery for all the "USB-PERSIST"-enabled child devices; + * the others will be disconnected. + */ +void usb_root_hub_lost_power(struct usb_device *rhdev) +{ + dev_notice(&rhdev->dev, "root hub lost power or was reset\n"); + rhdev->reset_resume = 1; +} +EXPORT_SYMBOL_GPL(usb_root_hub_lost_power); + +static const char * const usb3_lpm_names[] = { + "U0", + "U1", + "U2", + "U3", +}; + +/* + * Send a Set SEL control transfer to the device, prior to enabling + * device-initiated U1 or U2. This lets the device know the exit latencies from + * the time the device initiates a U1 or U2 exit, to the time it will receive a + * packet from the host. + * + * This function will fail if the SEL or PEL values for udev are greater than + * the maximum allowed values for the link state to be enabled. + */ +static int usb_req_set_sel(struct usb_device *udev) +{ + struct usb_set_sel_req *sel_values; + unsigned long long u1_sel; + unsigned long long u1_pel; + unsigned long long u2_sel; + unsigned long long u2_pel; + int ret; + + if (!udev->parent || udev->speed < USB_SPEED_SUPER || !udev->lpm_capable) + return 0; + + /* Convert SEL and PEL stored in ns to us */ + u1_sel = DIV_ROUND_UP(udev->u1_params.sel, 1000); + u1_pel = DIV_ROUND_UP(udev->u1_params.pel, 1000); + u2_sel = DIV_ROUND_UP(udev->u2_params.sel, 1000); + u2_pel = DIV_ROUND_UP(udev->u2_params.pel, 1000); + + /* + * Make sure that the calculated SEL and PEL values for the link + * state we're enabling aren't bigger than the max SEL/PEL + * value that will fit in the SET SEL control transfer. + * Otherwise the device would get an incorrect idea of the exit + * latency for the link state, and could start a device-initiated + * U1/U2 when the exit latencies are too high. + */ + if (u1_sel > USB3_LPM_MAX_U1_SEL_PEL || + u1_pel > USB3_LPM_MAX_U1_SEL_PEL || + u2_sel > USB3_LPM_MAX_U2_SEL_PEL || + u2_pel > USB3_LPM_MAX_U2_SEL_PEL) { + dev_dbg(&udev->dev, "Device-initiated U1/U2 disabled due to long SEL or PEL\n"); + return -EINVAL; + } + + /* + * usb_enable_lpm() can be called as part of a failed device reset, + * which may be initiated by an error path of a mass storage driver. + * Therefore, use GFP_NOIO. + */ + sel_values = kmalloc(sizeof *(sel_values), GFP_NOIO); + if (!sel_values) + return -ENOMEM; + + sel_values->u1_sel = u1_sel; + sel_values->u1_pel = u1_pel; + sel_values->u2_sel = cpu_to_le16(u2_sel); + sel_values->u2_pel = cpu_to_le16(u2_pel); + + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + USB_REQ_SET_SEL, + USB_RECIP_DEVICE, + 0, 0, + sel_values, sizeof *(sel_values), + USB_CTRL_SET_TIMEOUT); + kfree(sel_values); + + if (ret > 0) + udev->lpm_devinit_allow = 1; + + return ret; +} + +/* + * Enable or disable device-initiated U1 or U2 transitions. + */ +static int usb_set_device_initiated_lpm(struct usb_device *udev, + enum usb3_link_state state, bool enable) +{ + int ret; + int feature; + + switch (state) { + case USB3_LPM_U1: + feature = USB_DEVICE_U1_ENABLE; + break; + case USB3_LPM_U2: + feature = USB_DEVICE_U2_ENABLE; + break; + default: + dev_warn(&udev->dev, "%s: Can't %s non-U1 or U2 state.\n", + __func__, enable ? "enable" : "disable"); + return -EINVAL; + } + + if (udev->state != USB_STATE_CONFIGURED) { + dev_dbg(&udev->dev, "%s: Can't %s %s state " + "for unconfigured device.\n", + __func__, enable ? "enable" : "disable", + usb3_lpm_names[state]); + return 0; + } + + if (enable) { + /* + * Now send the control transfer to enable device-initiated LPM + * for either U1 or U2. + */ + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + USB_REQ_SET_FEATURE, + USB_RECIP_DEVICE, + feature, + 0, NULL, 0, + USB_CTRL_SET_TIMEOUT); + } else { + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + USB_REQ_CLEAR_FEATURE, + USB_RECIP_DEVICE, + feature, + 0, NULL, 0, + USB_CTRL_SET_TIMEOUT); + } + if (ret < 0) { + dev_warn(&udev->dev, "%s of device-initiated %s failed.\n", + enable ? "Enable" : "Disable", + usb3_lpm_names[state]); + return -EBUSY; + } + return 0; +} + +static int usb_set_lpm_timeout(struct usb_device *udev, + enum usb3_link_state state, int timeout) +{ + int ret; + int feature; + + switch (state) { + case USB3_LPM_U1: + feature = USB_PORT_FEAT_U1_TIMEOUT; + break; + case USB3_LPM_U2: + feature = USB_PORT_FEAT_U2_TIMEOUT; + break; + default: + dev_warn(&udev->dev, "%s: Can't set timeout for non-U1 or U2 state.\n", + __func__); + return -EINVAL; + } + + if (state == USB3_LPM_U1 && timeout > USB3_LPM_U1_MAX_TIMEOUT && + timeout != USB3_LPM_DEVICE_INITIATED) { + dev_warn(&udev->dev, "Failed to set %s timeout to 0x%x, " + "which is a reserved value.\n", + usb3_lpm_names[state], timeout); + return -EINVAL; + } + + ret = set_port_feature(udev->parent, + USB_PORT_LPM_TIMEOUT(timeout) | udev->portnum, + feature); + if (ret < 0) { + dev_warn(&udev->dev, "Failed to set %s timeout to 0x%x," + "error code %i\n", usb3_lpm_names[state], + timeout, ret); + return -EBUSY; + } + if (state == USB3_LPM_U1) + udev->u1_params.timeout = timeout; + else + udev->u2_params.timeout = timeout; + return 0; +} + +/* + * Don't allow device intiated U1/U2 if the system exit latency + one bus + * interval is greater than the minimum service interval of any active + * periodic endpoint. See USB 3.2 section 9.4.9 + */ +static bool usb_device_may_initiate_lpm(struct usb_device *udev, + enum usb3_link_state state) +{ + unsigned int sel; /* us */ + int i, j; + + if (!udev->lpm_devinit_allow) + return false; + + if (state == USB3_LPM_U1) + sel = DIV_ROUND_UP(udev->u1_params.sel, 1000); + else if (state == USB3_LPM_U2) + sel = DIV_ROUND_UP(udev->u2_params.sel, 1000); + else + return false; + + for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { + struct usb_interface *intf; + struct usb_endpoint_descriptor *desc; + unsigned int interval; + + intf = udev->actconfig->interface[i]; + if (!intf) + continue; + + for (j = 0; j < intf->cur_altsetting->desc.bNumEndpoints; j++) { + desc = &intf->cur_altsetting->endpoint[j].desc; + + if (usb_endpoint_xfer_int(desc) || + usb_endpoint_xfer_isoc(desc)) { + interval = (1 << (desc->bInterval - 1)) * 125; + if (sel + 125 > interval) + return false; + } + } + } + return true; +} + +/* + * Enable the hub-initiated U1/U2 idle timeouts, and enable device-initiated + * U1/U2 entry. + * + * We will attempt to enable U1 or U2, but there are no guarantees that the + * control transfers to set the hub timeout or enable device-initiated U1/U2 + * will be successful. + * + * If the control transfer to enable device-initiated U1/U2 entry fails, then + * hub-initiated U1/U2 will be disabled. + * + * If we cannot set the parent hub U1/U2 timeout, we attempt to let the xHCI + * driver know about it. If that call fails, it should be harmless, and just + * take up more slightly more bus bandwidth for unnecessary U1/U2 exit latency. + */ +static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, + enum usb3_link_state state) +{ + int timeout; + __u8 u1_mel; + __le16 u2_mel; + + /* Skip if the device BOS descriptor couldn't be read */ + if (!udev->bos) + return; + + u1_mel = udev->bos->ss_cap->bU1devExitLat; + u2_mel = udev->bos->ss_cap->bU2DevExitLat; + + /* If the device says it doesn't have *any* exit latency to come out of + * U1 or U2, it's probably lying. Assume it doesn't implement that link + * state. + */ + if ((state == USB3_LPM_U1 && u1_mel == 0) || + (state == USB3_LPM_U2 && u2_mel == 0)) + return; + + /* We allow the host controller to set the U1/U2 timeout internally + * first, so that it can change its schedule to account for the + * additional latency to send data to a device in a lower power + * link state. + */ + timeout = hcd->driver->enable_usb3_lpm_timeout(hcd, udev, state); + + /* xHCI host controller doesn't want to enable this LPM state. */ + if (timeout == 0) + return; + + if (timeout < 0) { + dev_warn(&udev->dev, "Could not enable %s link state, " + "xHCI error %i.\n", usb3_lpm_names[state], + timeout); + return; + } + + if (usb_set_lpm_timeout(udev, state, timeout)) { + /* If we can't set the parent hub U1/U2 timeout, + * device-initiated LPM won't be allowed either, so let the xHCI + * host know that this link state won't be enabled. + */ + hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state); + return; + } + + /* Only a configured device will accept the Set Feature + * U1/U2_ENABLE + */ + if (udev->actconfig && + usb_device_may_initiate_lpm(udev, state)) { + if (usb_set_device_initiated_lpm(udev, state, true)) { + /* + * Request to enable device initiated U1/U2 failed, + * better to turn off lpm in this case. + */ + usb_set_lpm_timeout(udev, state, 0); + hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state); + return; + } + } + + if (state == USB3_LPM_U1) + udev->usb3_lpm_u1_enabled = 1; + else if (state == USB3_LPM_U2) + udev->usb3_lpm_u2_enabled = 1; +} +/* + * Disable the hub-initiated U1/U2 idle timeouts, and disable device-initiated + * U1/U2 entry. + * + * If this function returns -EBUSY, the parent hub will still allow U1/U2 entry. + * If zero is returned, the parent will not allow the link to go into U1/U2. + * + * If zero is returned, device-initiated U1/U2 entry may still be enabled, but + * it won't have an effect on the bus link state because the parent hub will + * still disallow device-initiated U1/U2 entry. + * + * If zero is returned, the xHCI host controller may still think U1/U2 entry is + * possible. The result will be slightly more bus bandwidth will be taken up + * (to account for U1/U2 exit latency), but it should be harmless. + */ +static int usb_disable_link_state(struct usb_hcd *hcd, struct usb_device *udev, + enum usb3_link_state state) +{ + switch (state) { + case USB3_LPM_U1: + case USB3_LPM_U2: + break; + default: + dev_warn(&udev->dev, "%s: Can't disable non-U1 or U2 state.\n", + __func__); + return -EINVAL; + } + + if (usb_set_lpm_timeout(udev, state, 0)) + return -EBUSY; + + usb_set_device_initiated_lpm(udev, state, false); + + if (hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state)) + dev_warn(&udev->dev, "Could not disable xHCI %s timeout, " + "bus schedule bandwidth may be impacted.\n", + usb3_lpm_names[state]); + + /* As soon as usb_set_lpm_timeout(0) return 0, hub initiated LPM + * is disabled. Hub will disallows link to enter U1/U2 as well, + * even device is initiating LPM. Hence LPM is disabled if hub LPM + * timeout set to 0, no matter device-initiated LPM is disabled or + * not. + */ + if (state == USB3_LPM_U1) + udev->usb3_lpm_u1_enabled = 0; + else if (state == USB3_LPM_U2) + udev->usb3_lpm_u2_enabled = 0; + + return 0; +} + +/* + * Disable hub-initiated and device-initiated U1 and U2 entry. + * Caller must own the bandwidth_mutex. + * + * This will call usb_enable_lpm() on failure, which will decrement + * lpm_disable_count, and will re-enable LPM if lpm_disable_count reaches zero. + */ +int usb_disable_lpm(struct usb_device *udev) +{ + struct usb_hcd *hcd; + + if (!udev || !udev->parent || + udev->speed < USB_SPEED_SUPER || + !udev->lpm_capable || + udev->state < USB_STATE_CONFIGURED) + return 0; + + hcd = bus_to_hcd(udev->bus); + if (!hcd || !hcd->driver->disable_usb3_lpm_timeout) + return 0; + + udev->lpm_disable_count++; + if ((udev->u1_params.timeout == 0 && udev->u2_params.timeout == 0)) + return 0; + + /* If LPM is enabled, attempt to disable it. */ + if (usb_disable_link_state(hcd, udev, USB3_LPM_U1)) + goto enable_lpm; + if (usb_disable_link_state(hcd, udev, USB3_LPM_U2)) + goto enable_lpm; + + return 0; + +enable_lpm: + usb_enable_lpm(udev); + return -EBUSY; +} +EXPORT_SYMBOL_GPL(usb_disable_lpm); + +/* Grab the bandwidth_mutex before calling usb_disable_lpm() */ +int usb_unlocked_disable_lpm(struct usb_device *udev) +{ + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + int ret; + + if (!hcd) + return -EINVAL; + + mutex_lock(hcd->bandwidth_mutex); + ret = usb_disable_lpm(udev); + mutex_unlock(hcd->bandwidth_mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(usb_unlocked_disable_lpm); + +/* + * Attempt to enable device-initiated and hub-initiated U1 and U2 entry. The + * xHCI host policy may prevent U1 or U2 from being enabled. + * + * Other callers may have disabled link PM, so U1 and U2 entry will be disabled + * until the lpm_disable_count drops to zero. Caller must own the + * bandwidth_mutex. + */ +void usb_enable_lpm(struct usb_device *udev) +{ + struct usb_hcd *hcd; + struct usb_hub *hub; + struct usb_port *port_dev; + + if (!udev || !udev->parent || + udev->speed < USB_SPEED_SUPER || + !udev->lpm_capable || + udev->state < USB_STATE_CONFIGURED) + return; + + udev->lpm_disable_count--; + hcd = bus_to_hcd(udev->bus); + /* Double check that we can both enable and disable LPM. + * Device must be configured to accept set feature U1/U2 timeout. + */ + if (!hcd || !hcd->driver->enable_usb3_lpm_timeout || + !hcd->driver->disable_usb3_lpm_timeout) + return; + + if (udev->lpm_disable_count > 0) + return; + + hub = usb_hub_to_struct_hub(udev->parent); + if (!hub) + return; + + port_dev = hub->ports[udev->portnum - 1]; + + if (port_dev->usb3_lpm_u1_permit) + usb_enable_link_state(hcd, udev, USB3_LPM_U1); + + if (port_dev->usb3_lpm_u2_permit) + usb_enable_link_state(hcd, udev, USB3_LPM_U2); +} +EXPORT_SYMBOL_GPL(usb_enable_lpm); + +/* Grab the bandwidth_mutex before calling usb_enable_lpm() */ +void usb_unlocked_enable_lpm(struct usb_device *udev) +{ + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + + if (!hcd) + return; + + mutex_lock(hcd->bandwidth_mutex); + usb_enable_lpm(udev); + mutex_unlock(hcd->bandwidth_mutex); +} +EXPORT_SYMBOL_GPL(usb_unlocked_enable_lpm); + +/* usb3 devices use U3 for disabled, make sure remote wakeup is disabled */ +static void hub_usb3_port_prepare_disable(struct usb_hub *hub, + struct usb_port *port_dev) +{ + struct usb_device *udev = port_dev->child; + int ret; + + if (udev && udev->port_is_suspended && udev->do_remote_wakeup) { + ret = hub_set_port_link_state(hub, port_dev->portnum, + USB_SS_PORT_LS_U0); + if (!ret) { + msleep(USB_RESUME_TIMEOUT); + ret = usb_disable_remote_wakeup(udev); + } + if (ret) + dev_warn(&udev->dev, + "Port disable: can't disable remote wake\n"); + udev->do_remote_wakeup = 0; + } +} + +#else /* CONFIG_PM */ + +#define hub_suspend NULL +#define hub_resume NULL +#define hub_reset_resume NULL + +static inline void hub_usb3_port_prepare_disable(struct usb_hub *hub, + struct usb_port *port_dev) { } + +int usb_disable_lpm(struct usb_device *udev) +{ + return 0; +} +EXPORT_SYMBOL_GPL(usb_disable_lpm); + +void usb_enable_lpm(struct usb_device *udev) { } +EXPORT_SYMBOL_GPL(usb_enable_lpm); + +int usb_unlocked_disable_lpm(struct usb_device *udev) +{ + return 0; +} +EXPORT_SYMBOL_GPL(usb_unlocked_disable_lpm); + +void usb_unlocked_enable_lpm(struct usb_device *udev) { } +EXPORT_SYMBOL_GPL(usb_unlocked_enable_lpm); + +int usb_disable_ltm(struct usb_device *udev) +{ + return 0; +} +EXPORT_SYMBOL_GPL(usb_disable_ltm); + +void usb_enable_ltm(struct usb_device *udev) { } +EXPORT_SYMBOL_GPL(usb_enable_ltm); + +static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port, + u16 portstatus, u16 portchange) +{ + return 0; +} + +static int usb_req_set_sel(struct usb_device *udev) +{ + return 0; +} + +#endif /* CONFIG_PM */ + +/* + * USB-3 does not have a similar link state as USB-2 that will avoid negotiating + * a connection with a plugged-in cable but will signal the host when the cable + * is unplugged. Disable remote wake and set link state to U3 for USB-3 devices + */ +static int hub_port_disable(struct usb_hub *hub, int port1, int set_state) +{ + struct usb_port *port_dev = hub->ports[port1 - 1]; + struct usb_device *hdev = hub->hdev; + int ret = 0; + + if (!hub->error) { + if (hub_is_superspeed(hub->hdev)) { + hub_usb3_port_prepare_disable(hub, port_dev); + ret = hub_set_port_link_state(hub, port_dev->portnum, + USB_SS_PORT_LS_U3); + } else { + ret = usb_clear_port_feature(hdev, port1, + USB_PORT_FEAT_ENABLE); + } + } + if (port_dev->child && set_state) + usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED); + if (ret && ret != -ENODEV) + dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret); + return ret; +} + +/* + * usb_port_disable - disable a usb device's upstream port + * @udev: device to disable + * Context: @udev locked, must be able to sleep. + * + * Disables a USB device that isn't in active use. + */ +int usb_port_disable(struct usb_device *udev) +{ + struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent); + + return hub_port_disable(hub, udev->portnum, 0); +} + +/* USB 2.0 spec, 7.1.7.3 / fig 7-29: + * + * Between connect detection and reset signaling there must be a delay + * of 100ms at least for debounce and power-settling. The corresponding + * timer shall restart whenever the downstream port detects a disconnect. + * + * Apparently there are some bluetooth and irda-dongles and a number of + * low-speed devices for which this debounce period may last over a second. + * Not covered by the spec - but easy to deal with. + * + * This implementation uses a 1500ms total debounce timeout; if the + * connection isn't stable by then it returns -ETIMEDOUT. It checks + * every 25ms for transient disconnects. When the port status has been + * unchanged for 100ms it returns the port status. + */ +int hub_port_debounce(struct usb_hub *hub, int port1, bool must_be_connected) +{ + int ret; + u16 portchange, portstatus; + unsigned connection = 0xffff; + int total_time, stable_time = 0; + struct usb_port *port_dev = hub->ports[port1 - 1]; + + for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) { + ret = usb_hub_port_status(hub, port1, &portstatus, &portchange); + if (ret < 0) + return ret; + + if (!(portchange & USB_PORT_STAT_C_CONNECTION) && + (portstatus & USB_PORT_STAT_CONNECTION) == connection) { + if (!must_be_connected || + (connection == USB_PORT_STAT_CONNECTION)) + stable_time += HUB_DEBOUNCE_STEP; + if (stable_time >= HUB_DEBOUNCE_STABLE) + break; + } else { + stable_time = 0; + connection = portstatus & USB_PORT_STAT_CONNECTION; + } + + if (portchange & USB_PORT_STAT_C_CONNECTION) { + usb_clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_CONNECTION); + } + + if (total_time >= HUB_DEBOUNCE_TIMEOUT) + break; + msleep(HUB_DEBOUNCE_STEP); + } + + dev_dbg(&port_dev->dev, "debounce total %dms stable %dms status 0x%x\n", + total_time, stable_time, portstatus); + + if (stable_time < HUB_DEBOUNCE_STABLE) + return -ETIMEDOUT; + return portstatus; +} + +void usb_ep0_reinit(struct usb_device *udev) +{ + usb_disable_endpoint(udev, 0 + USB_DIR_IN, true); + usb_disable_endpoint(udev, 0 + USB_DIR_OUT, true); + usb_enable_endpoint(udev, &udev->ep0, true); +} +EXPORT_SYMBOL_GPL(usb_ep0_reinit); + +#define usb_sndaddr0pipe() (PIPE_CONTROL << 30) +#define usb_rcvaddr0pipe() ((PIPE_CONTROL << 30) | USB_DIR_IN) + +static int hub_set_address(struct usb_device *udev, int devnum) +{ + int retval; + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + + /* + * The host controller will choose the device address, + * instead of the core having chosen it earlier + */ + if (!hcd->driver->address_device && devnum <= 1) + return -EINVAL; + if (udev->state == USB_STATE_ADDRESS) + return 0; + if (udev->state != USB_STATE_DEFAULT) + return -EINVAL; + if (hcd->driver->address_device) + retval = hcd->driver->address_device(hcd, udev); + else + retval = usb_control_msg(udev, usb_sndaddr0pipe(), + USB_REQ_SET_ADDRESS, 0, devnum, 0, + NULL, 0, USB_CTRL_SET_TIMEOUT); + if (retval == 0) { + update_devnum(udev, devnum); + /* Device now using proper address. */ + usb_set_device_state(udev, USB_STATE_ADDRESS); + usb_ep0_reinit(udev); + } + return retval; +} + +/* + * There are reports of USB 3.0 devices that say they support USB 2.0 Link PM + * when they're plugged into a USB 2.0 port, but they don't work when LPM is + * enabled. + * + * Only enable USB 2.0 Link PM if the port is internal (hardwired), or the + * device says it supports the new USB 2.0 Link PM errata by setting the BESL + * support bit in the BOS descriptor. + */ +static void hub_set_initial_usb2_lpm_policy(struct usb_device *udev) +{ + struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent); + int connect_type = USB_PORT_CONNECT_TYPE_UNKNOWN; + + if (!udev->usb2_hw_lpm_capable || !udev->bos) + return; + + if (hub) + connect_type = hub->ports[udev->portnum - 1]->connect_type; + + if ((udev->bos->ext_cap->bmAttributes & cpu_to_le32(USB_BESL_SUPPORT)) || + connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) { + udev->usb2_hw_lpm_allowed = 1; + usb_enable_usb2_hardware_lpm(udev); + } +} + +static int hub_enable_device(struct usb_device *udev) +{ + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + + if (!hcd->driver->enable_device) + return 0; + if (udev->state == USB_STATE_ADDRESS) + return 0; + if (udev->state != USB_STATE_DEFAULT) + return -EINVAL; + + return hcd->driver->enable_device(hcd, udev); +} + +/* + * Get the bMaxPacketSize0 value during initialization by reading the + * device's device descriptor. Since we don't already know this value, + * the transfer is unsafe and it ignores I/O errors, only testing for + * reasonable received values. + * + * For "old scheme" initialization, size will be 8 so we read just the + * start of the device descriptor, which should work okay regardless of + * the actual bMaxPacketSize0 value. For "new scheme" initialization, + * size will be 64 (and buf will point to a sufficiently large buffer), + * which might not be kosher according to the USB spec but it's what + * Windows does and what many devices expect. + * + * Returns: bMaxPacketSize0 or a negative error code. + */ +static int get_bMaxPacketSize0(struct usb_device *udev, + struct usb_device_descriptor *buf, int size, bool first_time) +{ + int i, rc; + + /* + * Retry on all errors; some devices are flakey. + * 255 is for WUSB devices, we actually need to use + * 512 (WUSB1.0[4.8.1]). + */ + for (i = 0; i < GET_MAXPACKET0_TRIES; ++i) { + /* Start with invalid values in case the transfer fails */ + buf->bDescriptorType = buf->bMaxPacketSize0 = 0; + rc = usb_control_msg(udev, usb_rcvaddr0pipe(), + USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, + USB_DT_DEVICE << 8, 0, + buf, size, + initial_descriptor_timeout); + switch (buf->bMaxPacketSize0) { + case 8: case 16: case 32: case 64: case 9: + if (buf->bDescriptorType == USB_DT_DEVICE) { + rc = buf->bMaxPacketSize0; + break; + } + fallthrough; + default: + if (rc >= 0) + rc = -EPROTO; + break; + } + + /* + * Some devices time out if they are powered on + * when already connected. They need a second + * reset, so return early. But only on the first + * attempt, lest we get into a time-out/reset loop. + */ + if (rc > 0 || (rc == -ETIMEDOUT && first_time && + udev->speed > USB_SPEED_FULL)) + break; + } + return rc; +} + +#define GET_DESCRIPTOR_BUFSIZE 64 + +/* Reset device, (re)assign address, get device descriptor. + * Device connection must be stable, no more debouncing needed. + * Returns device in USB_STATE_ADDRESS, except on error. + * + * If this is called for an already-existing device (as part of + * usb_reset_and_verify_device), the caller must own the device lock and + * the port lock. For a newly detected device that is not accessible + * through any global pointers, it's not necessary to lock the device, + * but it is still necessary to lock the port. + * + * For a newly detected device, @dev_descr must be NULL. The device + * descriptor retrieved from the device will then be stored in + * @udev->descriptor. For an already existing device, @dev_descr + * must be non-NULL. The device descriptor will be stored there, + * not in @udev->descriptor, because descriptors for registered + * devices are meant to be immutable. + */ +static int +hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, + int retry_counter, struct usb_device_descriptor *dev_descr) +{ + struct usb_device *hdev = hub->hdev; + struct usb_hcd *hcd = bus_to_hcd(hdev->bus); + struct usb_port *port_dev = hub->ports[port1 - 1]; + int retries, operations, retval, i; + unsigned delay = HUB_SHORT_RESET_TIME; + enum usb_device_speed oldspeed = udev->speed; + const char *speed; + int devnum = udev->devnum; + const char *driver_name; + bool do_new_scheme; + const bool initial = !dev_descr; + int maxp0; + struct usb_device_descriptor *buf, *descr; + + buf = kmalloc(GET_DESCRIPTOR_BUFSIZE, GFP_NOIO); + if (!buf) + return -ENOMEM; + + /* root hub ports have a slightly longer reset period + * (from USB 2.0 spec, section 7.1.7.5) + */ + if (!hdev->parent) { + delay = HUB_ROOT_RESET_TIME; + if (port1 == hdev->bus->otg_port) + hdev->bus->b_hnp_enable = 0; + } + + /* Some low speed devices have problems with the quick delay, so */ + /* be a bit pessimistic with those devices. RHbug #23670 */ + if (oldspeed == USB_SPEED_LOW) + delay = HUB_LONG_RESET_TIME; + + /* Reset the device; full speed may morph to high speed */ + /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */ + retval = hub_port_reset(hub, port1, udev, delay, false); + if (retval < 0) /* error or disconnect */ + goto fail; + /* success, speed is known */ + + retval = -ENODEV; + + /* Don't allow speed changes at reset, except usb 3.0 to faster */ + if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed && + !(oldspeed == USB_SPEED_SUPER && udev->speed > oldspeed)) { + dev_dbg(&udev->dev, "device reset changed speed!\n"); + goto fail; + } + oldspeed = udev->speed; + + if (initial) { + /* USB 2.0 section 5.5.3 talks about ep0 maxpacket ... + * it's fixed size except for full speed devices. + * For Wireless USB devices, ep0 max packet is always 512 (tho + * reported as 0xff in the device descriptor). WUSB1.0[4.8.1]. + */ + switch (udev->speed) { + case USB_SPEED_SUPER_PLUS: + case USB_SPEED_SUPER: + case USB_SPEED_WIRELESS: /* fixed at 512 */ + udev->ep0.desc.wMaxPacketSize = cpu_to_le16(512); + break; + case USB_SPEED_HIGH: /* fixed at 64 */ + udev->ep0.desc.wMaxPacketSize = cpu_to_le16(64); + break; + case USB_SPEED_FULL: /* 8, 16, 32, or 64 */ + /* to determine the ep0 maxpacket size, try to read + * the device descriptor to get bMaxPacketSize0 and + * then correct our initial guess. + */ + udev->ep0.desc.wMaxPacketSize = cpu_to_le16(64); + break; + case USB_SPEED_LOW: /* fixed at 8 */ + udev->ep0.desc.wMaxPacketSize = cpu_to_le16(8); + break; + default: + goto fail; + } + } + + if (udev->speed == USB_SPEED_WIRELESS) + speed = "variable speed Wireless"; + else + speed = usb_speed_string(udev->speed); + + /* + * The controller driver may be NULL if the controller device + * is the middle device between platform device and roothub. + * This middle device may not need a device driver due to + * all hardware control can be at platform device driver, this + * platform device is usually a dual-role USB controller device. + */ + if (udev->bus->controller->driver) + driver_name = udev->bus->controller->driver->name; + else + driver_name = udev->bus->sysdev->driver->name; + + if (udev->speed < USB_SPEED_SUPER) + dev_info(&udev->dev, + "%s %s USB device number %d using %s\n", + (initial ? "new" : "reset"), speed, + devnum, driver_name); + + if (initial) { + /* Set up TT records, if needed */ + if (hdev->tt) { + udev->tt = hdev->tt; + udev->ttport = hdev->ttport; + } else if (udev->speed != USB_SPEED_HIGH + && hdev->speed == USB_SPEED_HIGH) { + if (!hub->tt.hub) { + dev_err(&udev->dev, "parent hub has no TT\n"); + retval = -EINVAL; + goto fail; + } + udev->tt = &hub->tt; + udev->ttport = port1; + } + } + + /* Why interleave GET_DESCRIPTOR and SET_ADDRESS this way? + * Because device hardware and firmware is sometimes buggy in + * this area, and this is how Linux has done it for ages. + * Change it cautiously. + * + * NOTE: If use_new_scheme() is true we will start by issuing + * a 64-byte GET_DESCRIPTOR request. This is what Windows does, + * so it may help with some non-standards-compliant devices. + * Otherwise we start with SET_ADDRESS and then try to read the + * first 8 bytes of the device descriptor to get the ep0 maxpacket + * value. + */ + do_new_scheme = use_new_scheme(udev, retry_counter, port_dev); + + for (retries = 0; retries < GET_DESCRIPTOR_TRIES; (++retries, msleep(100))) { + if (do_new_scheme) { + retval = hub_enable_device(udev); + if (retval < 0) { + dev_err(&udev->dev, + "hub failed to enable device, error %d\n", + retval); + goto fail; + } + + maxp0 = get_bMaxPacketSize0(udev, buf, + GET_DESCRIPTOR_BUFSIZE, retries == 0); + if (maxp0 > 0 && !initial && + maxp0 != udev->descriptor.bMaxPacketSize0) { + dev_err(&udev->dev, "device reset changed ep0 maxpacket size!\n"); + retval = -ENODEV; + goto fail; + } + + retval = hub_port_reset(hub, port1, udev, delay, false); + if (retval < 0) /* error or disconnect */ + goto fail; + if (oldspeed != udev->speed) { + dev_dbg(&udev->dev, + "device reset changed speed!\n"); + retval = -ENODEV; + goto fail; + } + if (maxp0 < 0) { + if (maxp0 != -ENODEV) + dev_err(&udev->dev, "device descriptor read/64, error %d\n", + maxp0); + retval = maxp0; + continue; + } + } + + /* + * If device is WUSB, we already assigned an + * unauthorized address in the Connect Ack sequence; + * authorization will assign the final address. + */ + if (udev->wusb == 0) { + for (operations = 0; operations < SET_ADDRESS_TRIES; ++operations) { + retval = hub_set_address(udev, devnum); + if (retval >= 0) + break; + msleep(200); + } + if (retval < 0) { + if (retval != -ENODEV) + dev_err(&udev->dev, "device not accepting address %d, error %d\n", + devnum, retval); + goto fail; + } + if (udev->speed >= USB_SPEED_SUPER) { + devnum = udev->devnum; + dev_info(&udev->dev, + "%s SuperSpeed%s%s USB device number %d using %s\n", + (udev->config) ? "reset" : "new", + (udev->speed == USB_SPEED_SUPER_PLUS) ? + " Plus" : "", + (udev->ssp_rate == USB_SSP_GEN_2x2) ? + " Gen 2x2" : + (udev->ssp_rate == USB_SSP_GEN_2x1) ? + " Gen 2x1" : + (udev->ssp_rate == USB_SSP_GEN_1x2) ? + " Gen 1x2" : "", + devnum, driver_name); + } + + /* cope with hardware quirkiness: + * - let SET_ADDRESS settle, some device hardware wants it + * - read ep0 maxpacket even for high and low speed, + */ + msleep(10); + if (do_new_scheme) + break; + } + + /* !do_new_scheme || wusb */ + maxp0 = get_bMaxPacketSize0(udev, buf, 8, retries == 0); + if (maxp0 < 0) { + retval = maxp0; + if (retval != -ENODEV) + dev_err(&udev->dev, + "device descriptor read/8, error %d\n", + retval); + } else { + u32 delay; + + if (!initial && maxp0 != udev->descriptor.bMaxPacketSize0) { + dev_err(&udev->dev, "device reset changed ep0 maxpacket size!\n"); + retval = -ENODEV; + goto fail; + } + + delay = udev->parent->hub_delay; + udev->hub_delay = min_t(u32, delay, + USB_TP_TRANSMISSION_DELAY_MAX); + retval = usb_set_isoch_delay(udev); + if (retval) { + dev_dbg(&udev->dev, + "Failed set isoch delay, error %d\n", + retval); + retval = 0; + } + break; + } + } + if (retval) + goto fail; + + /* + * Check the ep0 maxpacket guess and correct it if necessary. + * maxp0 is the value stored in the device descriptor; + * i is the value it encodes (logarithmic for SuperSpeed or greater). + */ + i = maxp0; + if (udev->speed >= USB_SPEED_SUPER) { + if (maxp0 <= 16) + i = 1 << maxp0; + else + i = 0; /* Invalid */ + } + if (usb_endpoint_maxp(&udev->ep0.desc) == i) { + ; /* Initial ep0 maxpacket guess is right */ + } else if ((udev->speed == USB_SPEED_FULL || + udev->speed == USB_SPEED_HIGH) && + (i == 8 || i == 16 || i == 32 || i == 64)) { + /* Initial guess is wrong; use the descriptor's value */ + if (udev->speed == USB_SPEED_FULL) + dev_dbg(&udev->dev, "ep0 maxpacket = %d\n", i); + else + dev_warn(&udev->dev, "Using ep0 maxpacket: %d\n", i); + udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i); + usb_ep0_reinit(udev); + } else { + /* Initial guess is wrong and descriptor's value is invalid */ + dev_err(&udev->dev, "Invalid ep0 maxpacket: %d\n", maxp0); + retval = -EMSGSIZE; + goto fail; + } + + descr = usb_get_device_descriptor(udev); + if (IS_ERR(descr)) { + retval = PTR_ERR(descr); + if (retval != -ENODEV) + dev_err(&udev->dev, "device descriptor read/all, error %d\n", + retval); + goto fail; + } + if (initial) + udev->descriptor = *descr; + else + *dev_descr = *descr; + kfree(descr); + + /* + * Some superspeed devices have finished the link training process + * and attached to a superspeed hub port, but the device descriptor + * got from those devices show they aren't superspeed devices. Warm + * reset the port attached by the devices can fix them. + */ + if ((udev->speed >= USB_SPEED_SUPER) && + (le16_to_cpu(udev->descriptor.bcdUSB) < 0x0300)) { + dev_err(&udev->dev, "got a wrong device descriptor, warm reset device\n"); + hub_port_reset(hub, port1, udev, HUB_BH_RESET_TIME, true); + retval = -EINVAL; + goto fail; + } + + usb_detect_quirks(udev); + + if (udev->wusb == 0 && le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0201) { + retval = usb_get_bos_descriptor(udev); + if (!retval) { + udev->lpm_capable = usb_device_supports_lpm(udev); + udev->lpm_disable_count = 1; + usb_set_lpm_parameters(udev); + usb_req_set_sel(udev); + } + } + + retval = 0; + /* notify HCD that we have a device connected and addressed */ + if (hcd->driver->update_device) + hcd->driver->update_device(hcd, udev); + hub_set_initial_usb2_lpm_policy(udev); +fail: + if (retval) { + hub_port_disable(hub, port1, 0); + update_devnum(udev, devnum); /* for disconnect processing */ + } + kfree(buf); + return retval; +} + +static void +check_highspeed(struct usb_hub *hub, struct usb_device *udev, int port1) +{ + struct usb_qualifier_descriptor *qual; + int status; + + if (udev->quirks & USB_QUIRK_DEVICE_QUALIFIER) + return; + + qual = kmalloc(sizeof *qual, GFP_KERNEL); + if (qual == NULL) + return; + + status = usb_get_descriptor(udev, USB_DT_DEVICE_QUALIFIER, 0, + qual, sizeof *qual); + if (status == sizeof *qual) { + dev_info(&udev->dev, "not running at top speed; " + "connect to a high speed hub\n"); + /* hub LEDs are probably harder to miss than syslog */ + if (hub->has_indicators) { + hub->indicator[port1-1] = INDICATOR_GREEN_BLINK; + queue_delayed_work(system_power_efficient_wq, + &hub->leds, 0); + } + } + kfree(qual); +} + +static unsigned +hub_power_remaining(struct usb_hub *hub) +{ + struct usb_device *hdev = hub->hdev; + int remaining; + int port1; + + if (!hub->limited_power) + return 0; + + remaining = hdev->bus_mA - hub->descriptor->bHubContrCurrent; + for (port1 = 1; port1 <= hdev->maxchild; ++port1) { + struct usb_port *port_dev = hub->ports[port1 - 1]; + struct usb_device *udev = port_dev->child; + unsigned unit_load; + int delta; + + if (!udev) + continue; + if (hub_is_superspeed(udev)) + unit_load = 150; + else + unit_load = 100; + + /* + * Unconfigured devices may not use more than one unit load, + * or 8mA for OTG ports + */ + if (udev->actconfig) + delta = usb_get_max_power(udev, udev->actconfig); + else if (port1 != udev->bus->otg_port || hdev->parent) + delta = unit_load; + else + delta = 8; + if (delta > hub->mA_per_port) + dev_warn(&port_dev->dev, "%dmA is over %umA budget!\n", + delta, hub->mA_per_port); + remaining -= delta; + } + if (remaining < 0) { + dev_warn(hub->intfdev, "%dmA over power budget!\n", + -remaining); + remaining = 0; + } + return remaining; +} + + +static int descriptors_changed(struct usb_device *udev, + struct usb_device_descriptor *new_device_descriptor, + struct usb_host_bos *old_bos) +{ + int changed = 0; + unsigned index; + unsigned serial_len = 0; + unsigned len; + unsigned old_length; + int length; + char *buf; + + if (memcmp(&udev->descriptor, new_device_descriptor, + sizeof(*new_device_descriptor)) != 0) + return 1; + + if ((old_bos && !udev->bos) || (!old_bos && udev->bos)) + return 1; + if (udev->bos) { + len = le16_to_cpu(udev->bos->desc->wTotalLength); + if (len != le16_to_cpu(old_bos->desc->wTotalLength)) + return 1; + if (memcmp(udev->bos->desc, old_bos->desc, len)) + return 1; + } + + /* Since the idVendor, idProduct, and bcdDevice values in the + * device descriptor haven't changed, we will assume the + * Manufacturer and Product strings haven't changed either. + * But the SerialNumber string could be different (e.g., a + * different flash card of the same brand). + */ + if (udev->serial) + serial_len = strlen(udev->serial) + 1; + + len = serial_len; + for (index = 0; index < udev->descriptor.bNumConfigurations; index++) { + old_length = le16_to_cpu(udev->config[index].desc.wTotalLength); + len = max(len, old_length); + } + + buf = kmalloc(len, GFP_NOIO); + if (!buf) + /* assume the worst */ + return 1; + + for (index = 0; index < udev->descriptor.bNumConfigurations; index++) { + old_length = le16_to_cpu(udev->config[index].desc.wTotalLength); + length = usb_get_descriptor(udev, USB_DT_CONFIG, index, buf, + old_length); + if (length != old_length) { + dev_dbg(&udev->dev, "config index %d, error %d\n", + index, length); + changed = 1; + break; + } + if (memcmp(buf, udev->rawdescriptors[index], old_length) + != 0) { + dev_dbg(&udev->dev, "config index %d changed (#%d)\n", + index, + ((struct usb_config_descriptor *) buf)-> + bConfigurationValue); + changed = 1; + break; + } + } + + if (!changed && serial_len) { + length = usb_string(udev, udev->descriptor.iSerialNumber, + buf, serial_len); + if (length + 1 != serial_len) { + dev_dbg(&udev->dev, "serial string error %d\n", + length); + changed = 1; + } else if (memcmp(buf, udev->serial, length) != 0) { + dev_dbg(&udev->dev, "serial string changed\n"); + changed = 1; + } + } + + kfree(buf); + return changed; +} + +static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, + u16 portchange) +{ + int status = -ENODEV; + int i; + unsigned unit_load; + struct usb_device *hdev = hub->hdev; + struct usb_hcd *hcd = bus_to_hcd(hdev->bus); + struct usb_port *port_dev = hub->ports[port1 - 1]; + struct usb_device *udev = port_dev->child; + static int unreliable_port = -1; + bool retry_locked; + + /* Disconnect any existing devices under this port */ + if (udev) { + if (hcd->usb_phy && !hdev->parent) + usb_phy_notify_disconnect(hcd->usb_phy, udev->speed); + usb_disconnect(&port_dev->child); + } + + /* We can forget about a "removed" device when there's a physical + * disconnect or the connect status changes. + */ + if (!(portstatus & USB_PORT_STAT_CONNECTION) || + (portchange & USB_PORT_STAT_C_CONNECTION)) + clear_bit(port1, hub->removed_bits); + + if (portchange & (USB_PORT_STAT_C_CONNECTION | + USB_PORT_STAT_C_ENABLE)) { + status = hub_port_debounce_be_stable(hub, port1); + if (status < 0) { + if (status != -ENODEV && + port1 != unreliable_port && + printk_ratelimit()) + dev_err(&port_dev->dev, "connect-debounce failed\n"); + portstatus &= ~USB_PORT_STAT_CONNECTION; + unreliable_port = port1; + } else { + portstatus = status; + } + } + + /* Return now if debouncing failed or nothing is connected or + * the device was "removed". + */ + if (!(portstatus & USB_PORT_STAT_CONNECTION) || + test_bit(port1, hub->removed_bits)) { + + /* + * maybe switch power back on (e.g. root hub was reset) + * but only if the port isn't owned by someone else. + */ + if (hub_is_port_power_switchable(hub) + && !usb_port_is_power_on(hub, portstatus) + && !port_dev->port_owner) + set_port_feature(hdev, port1, USB_PORT_FEAT_POWER); + + if (portstatus & USB_PORT_STAT_ENABLE) + goto done; + return; + } + if (hub_is_superspeed(hub->hdev)) + unit_load = 150; + else + unit_load = 100; + + status = 0; + + for (i = 0; i < PORT_INIT_TRIES; i++) { + usb_lock_port(port_dev); + mutex_lock(hcd->address0_mutex); + retry_locked = true; + /* reallocate for each attempt, since references + * to the previous one can escape in various ways + */ + udev = usb_alloc_dev(hdev, hdev->bus, port1); + if (!udev) { + dev_err(&port_dev->dev, + "couldn't allocate usb_device\n"); + mutex_unlock(hcd->address0_mutex); + usb_unlock_port(port_dev); + goto done; + } + + usb_set_device_state(udev, USB_STATE_POWERED); + udev->bus_mA = hub->mA_per_port; + udev->level = hdev->level + 1; + udev->wusb = hub_is_wusb(hub); + + /* Devices connected to SuperSpeed hubs are USB 3.0 or later */ + if (hub_is_superspeed(hub->hdev)) + udev->speed = USB_SPEED_SUPER; + else + udev->speed = USB_SPEED_UNKNOWN; + + choose_devnum(udev); + if (udev->devnum <= 0) { + status = -ENOTCONN; /* Don't retry */ + goto loop; + } + + /* reset (non-USB 3.0 devices) and get descriptor */ + status = hub_port_init(hub, udev, port1, i, NULL); + if (status < 0) + goto loop; + + mutex_unlock(hcd->address0_mutex); + usb_unlock_port(port_dev); + retry_locked = false; + + if (udev->quirks & USB_QUIRK_DELAY_INIT) + msleep(2000); + + /* consecutive bus-powered hubs aren't reliable; they can + * violate the voltage drop budget. if the new child has + * a "powered" LED, users should notice we didn't enable it + * (without reading syslog), even without per-port LEDs + * on the parent. + */ + if (udev->descriptor.bDeviceClass == USB_CLASS_HUB + && udev->bus_mA <= unit_load) { + u16 devstat; + + status = usb_get_std_status(udev, USB_RECIP_DEVICE, 0, + &devstat); + if (status) { + dev_dbg(&udev->dev, "get status %d ?\n", status); + goto loop_disable; + } + if ((devstat & (1 << USB_DEVICE_SELF_POWERED)) == 0) { + dev_err(&udev->dev, + "can't connect bus-powered hub " + "to this port\n"); + if (hub->has_indicators) { + hub->indicator[port1-1] = + INDICATOR_AMBER_BLINK; + queue_delayed_work( + system_power_efficient_wq, + &hub->leds, 0); + } + status = -ENOTCONN; /* Don't retry */ + goto loop_disable; + } + } + + /* check for devices running slower than they could */ + if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0200 + && udev->speed == USB_SPEED_FULL + && highspeed_hubs != 0) + check_highspeed(hub, udev, port1); + + /* Store the parent's children[] pointer. At this point + * udev becomes globally accessible, although presumably + * no one will look at it until hdev is unlocked. + */ + status = 0; + + mutex_lock(&usb_port_peer_mutex); + + /* We mustn't add new devices if the parent hub has + * been disconnected; we would race with the + * recursively_mark_NOTATTACHED() routine. + */ + spin_lock_irq(&device_state_lock); + if (hdev->state == USB_STATE_NOTATTACHED) + status = -ENOTCONN; + else + port_dev->child = udev; + spin_unlock_irq(&device_state_lock); + mutex_unlock(&usb_port_peer_mutex); + + /* Run it through the hoops (find a driver, etc) */ + if (!status) { + status = usb_new_device(udev); + if (status) { + mutex_lock(&usb_port_peer_mutex); + spin_lock_irq(&device_state_lock); + port_dev->child = NULL; + spin_unlock_irq(&device_state_lock); + mutex_unlock(&usb_port_peer_mutex); + } else { + if (hcd->usb_phy && !hdev->parent) + usb_phy_notify_connect(hcd->usb_phy, + udev->speed); + } + } + + if (status) + goto loop_disable; + + status = hub_power_remaining(hub); + if (status) + dev_dbg(hub->intfdev, "%dmA power budget left\n", status); + + return; + +loop_disable: + hub_port_disable(hub, port1, 1); +loop: + usb_ep0_reinit(udev); + release_devnum(udev); + hub_free_dev(udev); + if (retry_locked) { + mutex_unlock(hcd->address0_mutex); + usb_unlock_port(port_dev); + } + usb_put_dev(udev); + if ((status == -ENOTCONN) || (status == -ENOTSUPP)) + break; + + /* When halfway through our retry count, power-cycle the port */ + if (i == (PORT_INIT_TRIES - 1) / 2) { + dev_info(&port_dev->dev, "attempt power cycle\n"); + usb_hub_set_port_power(hdev, hub, port1, false); + msleep(2 * hub_power_on_good_delay(hub)); + usb_hub_set_port_power(hdev, hub, port1, true); + msleep(hub_power_on_good_delay(hub)); + } + } + if (hub->hdev->parent || + !hcd->driver->port_handed_over || + !(hcd->driver->port_handed_over)(hcd, port1)) { + if (status != -ENOTCONN && status != -ENODEV) + dev_err(&port_dev->dev, + "unable to enumerate USB device\n"); + } + +done: + hub_port_disable(hub, port1, 1); + if (hcd->driver->relinquish_port && !hub->hdev->parent) { + if (status != -ENOTCONN && status != -ENODEV) + hcd->driver->relinquish_port(hcd, port1); + } +} + +/* Handle physical or logical connection change events. + * This routine is called when: + * a port connection-change occurs; + * a port enable-change occurs (often caused by EMI); + * usb_reset_and_verify_device() encounters changed descriptors (as from + * a firmware download) + * caller already locked the hub + */ +static void hub_port_connect_change(struct usb_hub *hub, int port1, + u16 portstatus, u16 portchange) + __must_hold(&port_dev->status_lock) +{ + struct usb_port *port_dev = hub->ports[port1 - 1]; + struct usb_device *udev = port_dev->child; + struct usb_device_descriptor *descr; + int status = -ENODEV; + + dev_dbg(&port_dev->dev, "status %04x, change %04x, %s\n", portstatus, + portchange, portspeed(hub, portstatus)); + + if (hub->has_indicators) { + set_port_led(hub, port1, HUB_LED_AUTO); + hub->indicator[port1-1] = INDICATOR_AUTO; + } + +#ifdef CONFIG_USB_OTG + /* during HNP, don't repeat the debounce */ + if (hub->hdev->bus->is_b_host) + portchange &= ~(USB_PORT_STAT_C_CONNECTION | + USB_PORT_STAT_C_ENABLE); +#endif + + /* Try to resuscitate an existing device */ + if ((portstatus & USB_PORT_STAT_CONNECTION) && udev && + udev->state != USB_STATE_NOTATTACHED) { + if (portstatus & USB_PORT_STAT_ENABLE) { + /* + * USB-3 connections are initialized automatically by + * the hostcontroller hardware. Therefore check for + * changed device descriptors before resuscitating the + * device. + */ + descr = usb_get_device_descriptor(udev); + if (IS_ERR(descr)) { + dev_dbg(&udev->dev, + "can't read device descriptor %ld\n", + PTR_ERR(descr)); + } else { + if (descriptors_changed(udev, descr, + udev->bos)) { + dev_dbg(&udev->dev, + "device descriptor has changed\n"); + } else { + status = 0; /* Nothing to do */ + } + kfree(descr); + } +#ifdef CONFIG_PM + } else if (udev->state == USB_STATE_SUSPENDED && + udev->persist_enabled) { + /* For a suspended device, treat this as a + * remote wakeup event. + */ + usb_unlock_port(port_dev); + status = usb_remote_wakeup(udev); + usb_lock_port(port_dev); +#endif + } else { + /* Don't resuscitate */; + } + } + clear_bit(port1, hub->change_bits); + + /* successfully revalidated the connection */ + if (status == 0) + return; + + usb_unlock_port(port_dev); + hub_port_connect(hub, port1, portstatus, portchange); + usb_lock_port(port_dev); +} + +/* Handle notifying userspace about hub over-current events */ +static void port_over_current_notify(struct usb_port *port_dev) +{ + char *envp[3] = { NULL, NULL, NULL }; + struct device *hub_dev; + char *port_dev_path; + + sysfs_notify(&port_dev->dev.kobj, NULL, "over_current_count"); + + hub_dev = port_dev->dev.parent; + + if (!hub_dev) + return; + + port_dev_path = kobject_get_path(&port_dev->dev.kobj, GFP_KERNEL); + if (!port_dev_path) + return; + + envp[0] = kasprintf(GFP_KERNEL, "OVER_CURRENT_PORT=%s", port_dev_path); + if (!envp[0]) + goto exit; + + envp[1] = kasprintf(GFP_KERNEL, "OVER_CURRENT_COUNT=%u", + port_dev->over_current_count); + if (!envp[1]) + goto exit; + + kobject_uevent_env(&hub_dev->kobj, KOBJ_CHANGE, envp); + +exit: + kfree(envp[1]); + kfree(envp[0]); + kfree(port_dev_path); +} + +static void port_event(struct usb_hub *hub, int port1) + __must_hold(&port_dev->status_lock) +{ + int connect_change; + struct usb_port *port_dev = hub->ports[port1 - 1]; + struct usb_device *udev = port_dev->child; + struct usb_device *hdev = hub->hdev; + u16 portstatus, portchange; + int i = 0; + + connect_change = test_bit(port1, hub->change_bits); + clear_bit(port1, hub->event_bits); + clear_bit(port1, hub->wakeup_bits); + + if (usb_hub_port_status(hub, port1, &portstatus, &portchange) < 0) + return; + + if (portchange & USB_PORT_STAT_C_CONNECTION) { + usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION); + connect_change = 1; + } + + if (portchange & USB_PORT_STAT_C_ENABLE) { + if (!connect_change) + dev_dbg(&port_dev->dev, "enable change, status %08x\n", + portstatus); + usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_ENABLE); + + /* + * EM interference sometimes causes badly shielded USB devices + * to be shutdown by the hub, this hack enables them again. + * Works at least with mouse driver. + */ + if (!(portstatus & USB_PORT_STAT_ENABLE) + && !connect_change && udev) { + dev_err(&port_dev->dev, "disabled by hub (EMI?), re-enabling...\n"); + connect_change = 1; + } + } + + if (portchange & USB_PORT_STAT_C_OVERCURRENT) { + u16 status = 0, unused; + port_dev->over_current_count++; + port_over_current_notify(port_dev); + + dev_dbg(&port_dev->dev, "over-current change #%u\n", + port_dev->over_current_count); + usb_clear_port_feature(hdev, port1, + USB_PORT_FEAT_C_OVER_CURRENT); + msleep(100); /* Cool down */ + hub_power_on(hub, true); + usb_hub_port_status(hub, port1, &status, &unused); + if (status & USB_PORT_STAT_OVERCURRENT) + dev_err(&port_dev->dev, "over-current condition\n"); + } + + if (portchange & USB_PORT_STAT_C_RESET) { + dev_dbg(&port_dev->dev, "reset change\n"); + usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_RESET); + } + if ((portchange & USB_PORT_STAT_C_BH_RESET) + && hub_is_superspeed(hdev)) { + dev_dbg(&port_dev->dev, "warm reset change\n"); + usb_clear_port_feature(hdev, port1, + USB_PORT_FEAT_C_BH_PORT_RESET); + } + if (portchange & USB_PORT_STAT_C_LINK_STATE) { + dev_dbg(&port_dev->dev, "link state change\n"); + usb_clear_port_feature(hdev, port1, + USB_PORT_FEAT_C_PORT_LINK_STATE); + } + if (portchange & USB_PORT_STAT_C_CONFIG_ERROR) { + dev_warn(&port_dev->dev, "config error\n"); + usb_clear_port_feature(hdev, port1, + USB_PORT_FEAT_C_PORT_CONFIG_ERROR); + } + + /* skip port actions that require the port to be powered on */ + if (!pm_runtime_active(&port_dev->dev)) + return; + + if (hub_handle_remote_wakeup(hub, port1, portstatus, portchange)) + connect_change = 1; + + /* + * Avoid trying to recover a USB3 SS.Inactive port with a warm reset if + * the device was disconnected. A 12ms disconnect detect timer in + * SS.Inactive state transitions the port to RxDetect automatically. + * SS.Inactive link error state is common during device disconnect. + */ + while (hub_port_warm_reset_required(hub, port1, portstatus)) { + if ((i++ < DETECT_DISCONNECT_TRIES) && udev) { + u16 unused; + + msleep(20); + usb_hub_port_status(hub, port1, &portstatus, &unused); + dev_dbg(&port_dev->dev, "Wait for inactive link disconnect detect\n"); + continue; + } else if (!udev || !(portstatus & USB_PORT_STAT_CONNECTION) + || udev->state == USB_STATE_NOTATTACHED) { + dev_dbg(&port_dev->dev, "do warm reset, port only\n"); + if (hub_port_reset(hub, port1, NULL, + HUB_BH_RESET_TIME, true) < 0) + hub_port_disable(hub, port1, 1); + } else { + dev_dbg(&port_dev->dev, "do warm reset, full device\n"); + usb_unlock_port(port_dev); + usb_lock_device(udev); + usb_reset_device(udev); + usb_unlock_device(udev); + usb_lock_port(port_dev); + connect_change = 0; + } + break; + } + + if (connect_change) + hub_port_connect_change(hub, port1, portstatus, portchange); +} + +static void hub_event(struct work_struct *work) +{ + struct usb_device *hdev; + struct usb_interface *intf; + struct usb_hub *hub; + struct device *hub_dev; + u16 hubstatus; + u16 hubchange; + int i, ret; + + hub = container_of(work, struct usb_hub, events); + hdev = hub->hdev; + hub_dev = hub->intfdev; + intf = to_usb_interface(hub_dev); + + kcov_remote_start_usb((u64)hdev->bus->busnum); + + dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n", + hdev->state, hdev->maxchild, + /* NOTE: expects max 15 ports... */ + (u16) hub->change_bits[0], + (u16) hub->event_bits[0]); + + /* Lock the device, then check to see if we were + * disconnected while waiting for the lock to succeed. */ + usb_lock_device(hdev); + if (unlikely(hub->disconnected)) + goto out_hdev_lock; + + /* If the hub has died, clean up after it */ + if (hdev->state == USB_STATE_NOTATTACHED) { + hub->error = -ENODEV; + hub_quiesce(hub, HUB_DISCONNECT); + goto out_hdev_lock; + } + + /* Autoresume */ + ret = usb_autopm_get_interface(intf); + if (ret) { + dev_dbg(hub_dev, "Can't autoresume: %d\n", ret); + goto out_hdev_lock; + } + + /* If this is an inactive hub, do nothing */ + if (hub->quiescing) + goto out_autopm; + + if (hub->error) { + dev_dbg(hub_dev, "resetting for error %d\n", hub->error); + + ret = usb_reset_device(hdev); + if (ret) { + dev_dbg(hub_dev, "error resetting hub: %d\n", ret); + goto out_autopm; + } + + hub->nerrors = 0; + hub->error = 0; + } + + /* deal with port status changes */ + for (i = 1; i <= hdev->maxchild; i++) { + struct usb_port *port_dev = hub->ports[i - 1]; + + if (test_bit(i, hub->event_bits) + || test_bit(i, hub->change_bits) + || test_bit(i, hub->wakeup_bits)) { + /* + * The get_noresume and barrier ensure that if + * the port was in the process of resuming, we + * flush that work and keep the port active for + * the duration of the port_event(). However, + * if the port is runtime pm suspended + * (powered-off), we leave it in that state, run + * an abbreviated port_event(), and move on. + */ + pm_runtime_get_noresume(&port_dev->dev); + pm_runtime_barrier(&port_dev->dev); + usb_lock_port(port_dev); + port_event(hub, i); + usb_unlock_port(port_dev); + pm_runtime_put_sync(&port_dev->dev); + } + } + + /* deal with hub status changes */ + if (test_and_clear_bit(0, hub->event_bits) == 0) + ; /* do nothing */ + else if (hub_hub_status(hub, &hubstatus, &hubchange) < 0) + dev_err(hub_dev, "get_hub_status failed\n"); + else { + if (hubchange & HUB_CHANGE_LOCAL_POWER) { + dev_dbg(hub_dev, "power change\n"); + clear_hub_feature(hdev, C_HUB_LOCAL_POWER); + if (hubstatus & HUB_STATUS_LOCAL_POWER) + /* FIXME: Is this always true? */ + hub->limited_power = 1; + else + hub->limited_power = 0; + } + if (hubchange & HUB_CHANGE_OVERCURRENT) { + u16 status = 0; + u16 unused; + + dev_dbg(hub_dev, "over-current change\n"); + clear_hub_feature(hdev, C_HUB_OVER_CURRENT); + msleep(500); /* Cool down */ + hub_power_on(hub, true); + hub_hub_status(hub, &status, &unused); + if (status & HUB_STATUS_OVERCURRENT) + dev_err(hub_dev, "over-current condition\n"); + } + } + +out_autopm: + /* Balance the usb_autopm_get_interface() above */ + usb_autopm_put_interface_no_suspend(intf); +out_hdev_lock: + usb_unlock_device(hdev); + + /* Balance the stuff in kick_hub_wq() and allow autosuspend */ + usb_autopm_put_interface(intf); + kref_put(&hub->kref, hub_release); + + kcov_remote_stop(); +} + +static const struct usb_device_id hub_id_table[] = { + { .match_flags = USB_DEVICE_ID_MATCH_VENDOR + | USB_DEVICE_ID_MATCH_PRODUCT + | USB_DEVICE_ID_MATCH_INT_CLASS, + .idVendor = USB_VENDOR_SMSC, + .idProduct = USB_PRODUCT_USB5534B, + .bInterfaceClass = USB_CLASS_HUB, + .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND}, + { .match_flags = USB_DEVICE_ID_MATCH_VENDOR + | USB_DEVICE_ID_MATCH_PRODUCT, + .idVendor = USB_VENDOR_CYPRESS, + .idProduct = USB_PRODUCT_CY7C65632, + .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND}, + { .match_flags = USB_DEVICE_ID_MATCH_VENDOR + | USB_DEVICE_ID_MATCH_INT_CLASS, + .idVendor = USB_VENDOR_GENESYS_LOGIC, + .bInterfaceClass = USB_CLASS_HUB, + .driver_info = HUB_QUIRK_CHECK_PORT_AUTOSUSPEND}, + { .match_flags = USB_DEVICE_ID_MATCH_VENDOR + | USB_DEVICE_ID_MATCH_PRODUCT, + .idVendor = USB_VENDOR_TEXAS_INSTRUMENTS, + .idProduct = USB_PRODUCT_TUSB8041_USB2, + .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND}, + { .match_flags = USB_DEVICE_ID_MATCH_VENDOR + | USB_DEVICE_ID_MATCH_PRODUCT, + .idVendor = USB_VENDOR_TEXAS_INSTRUMENTS, + .idProduct = USB_PRODUCT_TUSB8041_USB3, + .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND}, + { .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS, + .bDeviceClass = USB_CLASS_HUB}, + { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS, + .bInterfaceClass = USB_CLASS_HUB}, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, hub_id_table); + +static struct usb_driver hub_driver = { + .name = "hub", + .probe = hub_probe, + .disconnect = hub_disconnect, + .suspend = hub_suspend, + .resume = hub_resume, + .reset_resume = hub_reset_resume, + .pre_reset = hub_pre_reset, + .post_reset = hub_post_reset, + .unlocked_ioctl = hub_ioctl, + .id_table = hub_id_table, + .supports_autosuspend = 1, +}; + +int usb_hub_init(void) +{ + if (usb_register(&hub_driver) < 0) { + printk(KERN_ERR "%s: can't register hub driver\n", + usbcore_name); + return -1; + } + + /* + * The workqueue needs to be freezable to avoid interfering with + * USB-PERSIST port handover. Otherwise it might see that a full-speed + * device was gone before the EHCI controller had handed its port + * over to the companion full-speed controller. + */ + hub_wq = alloc_workqueue("usb_hub_wq", WQ_FREEZABLE, 0); + if (hub_wq) + return 0; + + /* Fall through if kernel_thread failed */ + usb_deregister(&hub_driver); + pr_err("%s: can't allocate workqueue for usb hub\n", usbcore_name); + + return -1; +} + +void usb_hub_cleanup(void) +{ + destroy_workqueue(hub_wq); + + /* + * Hub resources are freed for us by usb_deregister. It calls + * usb_driver_purge on every device which in turn calls that + * devices disconnect function if it is using this driver. + * The hub_disconnect function takes care of releasing the + * individual hub resources. -greg + */ + usb_deregister(&hub_driver); +} /* usb_hub_cleanup() */ + +/** + * usb_reset_and_verify_device - perform a USB port reset to reinitialize a device + * @udev: device to reset (not in SUSPENDED or NOTATTACHED state) + * + * WARNING - don't use this routine to reset a composite device + * (one with multiple interfaces owned by separate drivers)! + * Use usb_reset_device() instead. + * + * Do a port reset, reassign the device's address, and establish its + * former operating configuration. If the reset fails, or the device's + * descriptors change from their values before the reset, or the original + * configuration and altsettings cannot be restored, a flag will be set + * telling hub_wq to pretend the device has been disconnected and then + * re-connected. All drivers will be unbound, and the device will be + * re-enumerated and probed all over again. + * + * Return: 0 if the reset succeeded, -ENODEV if the device has been + * flagged for logical disconnection, or some other negative error code + * if the reset wasn't even attempted. + * + * Note: + * The caller must own the device lock and the port lock, the latter is + * taken by usb_reset_device(). For example, it's safe to use + * usb_reset_device() from a driver probe() routine after downloading + * new firmware. For calls that might not occur during probe(), drivers + * should lock the device using usb_lock_device_for_reset(). + * + * Locking exception: This routine may also be called from within an + * autoresume handler. Such usage won't conflict with other tasks + * holding the device lock because these tasks should always call + * usb_autopm_resume_device(), thereby preventing any unwanted + * autoresume. The autoresume handler is expected to have already + * acquired the port lock before calling this routine. + */ +static int usb_reset_and_verify_device(struct usb_device *udev) +{ + struct usb_device *parent_hdev = udev->parent; + struct usb_hub *parent_hub; + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + struct usb_device_descriptor descriptor; + struct usb_host_bos *bos; + int i, j, ret = 0; + int port1 = udev->portnum; + + if (udev->state == USB_STATE_NOTATTACHED || + udev->state == USB_STATE_SUSPENDED) { + dev_dbg(&udev->dev, "device reset not allowed in state %d\n", + udev->state); + return -EINVAL; + } + + if (!parent_hdev) + return -EISDIR; + + parent_hub = usb_hub_to_struct_hub(parent_hdev); + + /* Disable USB2 hardware LPM. + * It will be re-enabled by the enumeration process. + */ + usb_disable_usb2_hardware_lpm(udev); + + bos = udev->bos; + udev->bos = NULL; + + mutex_lock(hcd->address0_mutex); + + for (i = 0; i < PORT_INIT_TRIES; ++i) { + + /* ep0 maxpacket size may change; let the HCD know about it. + * Other endpoints will be handled by re-enumeration. */ + usb_ep0_reinit(udev); + ret = hub_port_init(parent_hub, udev, port1, i, &descriptor); + if (ret >= 0 || ret == -ENOTCONN || ret == -ENODEV) + break; + } + mutex_unlock(hcd->address0_mutex); + + if (ret < 0) + goto re_enumerate; + + /* Device might have changed firmware (DFU or similar) */ + if (descriptors_changed(udev, &descriptor, bos)) { + dev_info(&udev->dev, "device firmware changed\n"); + goto re_enumerate; + } + + /* Restore the device's previous configuration */ + if (!udev->actconfig) + goto done; + + mutex_lock(hcd->bandwidth_mutex); + ret = usb_hcd_alloc_bandwidth(udev, udev->actconfig, NULL, NULL); + if (ret < 0) { + dev_warn(&udev->dev, + "Busted HC? Not enough HCD resources for " + "old configuration.\n"); + mutex_unlock(hcd->bandwidth_mutex); + goto re_enumerate; + } + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + USB_REQ_SET_CONFIGURATION, 0, + udev->actconfig->desc.bConfigurationValue, 0, + NULL, 0, USB_CTRL_SET_TIMEOUT); + if (ret < 0) { + dev_err(&udev->dev, + "can't restore configuration #%d (error=%d)\n", + udev->actconfig->desc.bConfigurationValue, ret); + mutex_unlock(hcd->bandwidth_mutex); + goto re_enumerate; + } + mutex_unlock(hcd->bandwidth_mutex); + usb_set_device_state(udev, USB_STATE_CONFIGURED); + + /* Put interfaces back into the same altsettings as before. + * Don't bother to send the Set-Interface request for interfaces + * that were already in altsetting 0; besides being unnecessary, + * many devices can't handle it. Instead just reset the host-side + * endpoint state. + */ + for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { + struct usb_host_config *config = udev->actconfig; + struct usb_interface *intf = config->interface[i]; + struct usb_interface_descriptor *desc; + + desc = &intf->cur_altsetting->desc; + if (desc->bAlternateSetting == 0) { + usb_disable_interface(udev, intf, true); + usb_enable_interface(udev, intf, true); + ret = 0; + } else { + /* Let the bandwidth allocation function know that this + * device has been reset, and it will have to use + * alternate setting 0 as the current alternate setting. + */ + intf->resetting_device = 1; + ret = usb_set_interface(udev, desc->bInterfaceNumber, + desc->bAlternateSetting); + intf->resetting_device = 0; + } + if (ret < 0) { + dev_err(&udev->dev, "failed to restore interface %d " + "altsetting %d (error=%d)\n", + desc->bInterfaceNumber, + desc->bAlternateSetting, + ret); + goto re_enumerate; + } + /* Resetting also frees any allocated streams */ + for (j = 0; j < intf->cur_altsetting->desc.bNumEndpoints; j++) + intf->cur_altsetting->endpoint[j].streams = 0; + } + +done: + /* Now that the alt settings are re-installed, enable LTM and LPM. */ + usb_enable_usb2_hardware_lpm(udev); + usb_unlocked_enable_lpm(udev); + usb_enable_ltm(udev); + usb_release_bos_descriptor(udev); + udev->bos = bos; + return 0; + +re_enumerate: + usb_release_bos_descriptor(udev); + udev->bos = bos; + hub_port_logical_disconnect(parent_hub, port1); + return -ENODEV; +} + +/** + * usb_reset_device - warn interface drivers and perform a USB port reset + * @udev: device to reset (not in NOTATTACHED state) + * + * Warns all drivers bound to registered interfaces (using their pre_reset + * method), performs the port reset, and then lets the drivers know that + * the reset is over (using their post_reset method). + * + * Return: The same as for usb_reset_and_verify_device(). + * However, if a reset is already in progress (for instance, if a + * driver doesn't have pre_reset() or post_reset() callbacks, and while + * being unbound or re-bound during the ongoing reset its disconnect() + * or probe() routine tries to perform a second, nested reset), the + * routine returns -EINPROGRESS. + * + * Note: + * The caller must own the device lock. For example, it's safe to use + * this from a driver probe() routine after downloading new firmware. + * For calls that might not occur during probe(), drivers should lock + * the device using usb_lock_device_for_reset(). + * + * If an interface is currently being probed or disconnected, we assume + * its driver knows how to handle resets. For all other interfaces, + * if the driver doesn't have pre_reset and post_reset methods then + * we attempt to unbind it and rebind afterward. + */ +int usb_reset_device(struct usb_device *udev) +{ + int ret; + int i; + unsigned int noio_flag; + struct usb_port *port_dev; + struct usb_host_config *config = udev->actconfig; + struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent); + + if (udev->state == USB_STATE_NOTATTACHED) { + dev_dbg(&udev->dev, "device reset not allowed in state %d\n", + udev->state); + return -EINVAL; + } + + if (!udev->parent) { + /* this requires hcd-specific logic; see ohci_restart() */ + dev_dbg(&udev->dev, "%s for root hub!\n", __func__); + return -EISDIR; + } + + if (udev->reset_in_progress) + return -EINPROGRESS; + udev->reset_in_progress = 1; + + port_dev = hub->ports[udev->portnum - 1]; + + /* + * Don't allocate memory with GFP_KERNEL in current + * context to avoid possible deadlock if usb mass + * storage interface or usbnet interface(iSCSI case) + * is included in current configuration. The easist + * approach is to do it for every device reset, + * because the device 'memalloc_noio' flag may have + * not been set before reseting the usb device. + */ + noio_flag = memalloc_noio_save(); + + /* Prevent autosuspend during the reset */ + usb_autoresume_device(udev); + + if (config) { + for (i = 0; i < config->desc.bNumInterfaces; ++i) { + struct usb_interface *cintf = config->interface[i]; + struct usb_driver *drv; + int unbind = 0; + + if (cintf->dev.driver) { + drv = to_usb_driver(cintf->dev.driver); + if (drv->pre_reset && drv->post_reset) + unbind = (drv->pre_reset)(cintf); + else if (cintf->condition == + USB_INTERFACE_BOUND) + unbind = 1; + if (unbind) + usb_forced_unbind_intf(cintf); + } + } + } + + usb_lock_port(port_dev); + ret = usb_reset_and_verify_device(udev); + usb_unlock_port(port_dev); + + if (config) { + for (i = config->desc.bNumInterfaces - 1; i >= 0; --i) { + struct usb_interface *cintf = config->interface[i]; + struct usb_driver *drv; + int rebind = cintf->needs_binding; + + if (!rebind && cintf->dev.driver) { + drv = to_usb_driver(cintf->dev.driver); + if (drv->post_reset) + rebind = (drv->post_reset)(cintf); + else if (cintf->condition == + USB_INTERFACE_BOUND) + rebind = 1; + if (rebind) + cintf->needs_binding = 1; + } + } + + /* If the reset failed, hub_wq will unbind drivers later */ + if (ret == 0) + usb_unbind_and_rebind_marked_interfaces(udev); + } + + usb_autosuspend_device(udev); + memalloc_noio_restore(noio_flag); + udev->reset_in_progress = 0; + return ret; +} +EXPORT_SYMBOL_GPL(usb_reset_device); + + +/** + * usb_queue_reset_device - Reset a USB device from an atomic context + * @iface: USB interface belonging to the device to reset + * + * This function can be used to reset a USB device from an atomic + * context, where usb_reset_device() won't work (as it blocks). + * + * Doing a reset via this method is functionally equivalent to calling + * usb_reset_device(), except for the fact that it is delayed to a + * workqueue. This means that any drivers bound to other interfaces + * might be unbound, as well as users from usbfs in user space. + * + * Corner cases: + * + * - Scheduling two resets at the same time from two different drivers + * attached to two different interfaces of the same device is + * possible; depending on how the driver attached to each interface + * handles ->pre_reset(), the second reset might happen or not. + * + * - If the reset is delayed so long that the interface is unbound from + * its driver, the reset will be skipped. + * + * - This function can be called during .probe(). It can also be called + * during .disconnect(), but doing so is pointless because the reset + * will not occur. If you really want to reset the device during + * .disconnect(), call usb_reset_device() directly -- but watch out + * for nested unbinding issues! + */ +void usb_queue_reset_device(struct usb_interface *iface) +{ + if (schedule_work(&iface->reset_ws)) + usb_get_intf(iface); +} +EXPORT_SYMBOL_GPL(usb_queue_reset_device); + +/** + * usb_hub_find_child - Get the pointer of child device + * attached to the port which is specified by @port1. + * @hdev: USB device belonging to the usb hub + * @port1: port num to indicate which port the child device + * is attached to. + * + * USB drivers call this function to get hub's child device + * pointer. + * + * Return: %NULL if input param is invalid and + * child's usb_device pointer if non-NULL. + */ +struct usb_device *usb_hub_find_child(struct usb_device *hdev, + int port1) +{ + struct usb_hub *hub = usb_hub_to_struct_hub(hdev); + + if (port1 < 1 || port1 > hdev->maxchild) + return NULL; + return hub->ports[port1 - 1]->child; +} +EXPORT_SYMBOL_GPL(usb_hub_find_child); + +void usb_hub_adjust_deviceremovable(struct usb_device *hdev, + struct usb_hub_descriptor *desc) +{ + struct usb_hub *hub = usb_hub_to_struct_hub(hdev); + enum usb_port_connect_type connect_type; + int i; + + if (!hub) + return; + + if (!hub_is_superspeed(hdev)) { + for (i = 1; i <= hdev->maxchild; i++) { + struct usb_port *port_dev = hub->ports[i - 1]; + + connect_type = port_dev->connect_type; + if (connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) { + u8 mask = 1 << (i%8); + + if (!(desc->u.hs.DeviceRemovable[i/8] & mask)) { + dev_dbg(&port_dev->dev, "DeviceRemovable is changed to 1 according to platform information.\n"); + desc->u.hs.DeviceRemovable[i/8] |= mask; + } + } + } + } else { + u16 port_removable = le16_to_cpu(desc->u.ss.DeviceRemovable); + + for (i = 1; i <= hdev->maxchild; i++) { + struct usb_port *port_dev = hub->ports[i - 1]; + + connect_type = port_dev->connect_type; + if (connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) { + u16 mask = 1 << i; + + if (!(port_removable & mask)) { + dev_dbg(&port_dev->dev, "DeviceRemovable is changed to 1 according to platform information.\n"); + port_removable |= mask; + } + } + } + + desc->u.ss.DeviceRemovable = cpu_to_le16(port_removable); + } +} + +#ifdef CONFIG_ACPI +/** + * usb_get_hub_port_acpi_handle - Get the usb port's acpi handle + * @hdev: USB device belonging to the usb hub + * @port1: port num of the port + * + * Return: Port's acpi handle if successful, %NULL if params are + * invalid. + */ +acpi_handle usb_get_hub_port_acpi_handle(struct usb_device *hdev, + int port1) +{ + struct usb_hub *hub = usb_hub_to_struct_hub(hdev); + + if (!hub) + return NULL; + + return ACPI_HANDLE(&hub->ports[port1 - 1]->dev); +} +#endif diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h new file mode 100644 index 000000000..bc66205ca --- /dev/null +++ b/drivers/usb/core/hub.h @@ -0,0 +1,171 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * usb hub driver head file + * + * Copyright (C) 1999 Linus Torvalds + * Copyright (C) 1999 Johannes Erdfelt + * Copyright (C) 1999 Gregory P. Smith + * Copyright (C) 2001 Brad Hards (bhards@bigpond.net.au) + * Copyright (C) 2012 Intel Corp (tianyu.lan@intel.com) + * + * move struct usb_hub to this file. + */ + +#include <linux/usb.h> +#include <linux/usb/ch11.h> +#include <linux/usb/hcd.h> +#include "usb.h" + +struct usb_hub { + struct device *intfdev; /* the "interface" device */ + struct usb_device *hdev; + struct kref kref; + struct urb *urb; /* for interrupt polling pipe */ + + /* buffer for urb ... with extra space in case of babble */ + u8 (*buffer)[8]; + union { + struct usb_hub_status hub; + struct usb_port_status port; + } *status; /* buffer for status reports */ + struct mutex status_mutex; /* for the status buffer */ + + int error; /* last reported error */ + int nerrors; /* track consecutive errors */ + + unsigned long event_bits[1]; /* status change bitmask */ + unsigned long change_bits[1]; /* ports with logical connect + status change */ + unsigned long removed_bits[1]; /* ports with a "removed" + device present */ + unsigned long wakeup_bits[1]; /* ports that have signaled + remote wakeup */ + unsigned long power_bits[1]; /* ports that are powered */ + unsigned long child_usage_bits[1]; /* ports powered on for + children */ + unsigned long warm_reset_bits[1]; /* ports requesting warm + reset recovery */ +#if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */ +#error event_bits[] is too short! +#endif + + struct usb_hub_descriptor *descriptor; /* class descriptor */ + struct usb_tt tt; /* Transaction Translator */ + + unsigned mA_per_port; /* current for each child */ +#ifdef CONFIG_PM + unsigned wakeup_enabled_descendants; +#endif + + unsigned limited_power:1; + unsigned quiescing:1; + unsigned disconnected:1; + unsigned in_reset:1; + unsigned quirk_disable_autosuspend:1; + + unsigned quirk_check_port_auto_suspend:1; + + unsigned has_indicators:1; + u8 indicator[USB_MAXCHILDREN]; + struct delayed_work leds; + struct delayed_work init_work; + struct work_struct events; + spinlock_t irq_urb_lock; + struct timer_list irq_urb_retry; + struct usb_port **ports; + struct list_head onboard_hub_devs; +}; + +/** + * struct usb port - kernel's representation of a usb port + * @child: usb device attached to the port + * @dev: generic device interface + * @port_owner: port's owner + * @peer: related usb2 and usb3 ports (share the same connector) + * @req: default pm qos request for hubs without port power control + * @connect_type: port's connect type + * @location: opaque representation of platform connector location + * @status_lock: synchronize port_event() vs usb_port_{suspend|resume} + * @portnum: port index num based one + * @is_superspeed cache super-speed status + * @usb3_lpm_u1_permit: whether USB3 U1 LPM is permitted. + * @usb3_lpm_u2_permit: whether USB3 U2 LPM is permitted. + */ +struct usb_port { + struct usb_device *child; + struct device dev; + struct usb_dev_state *port_owner; + struct usb_port *peer; + struct dev_pm_qos_request *req; + enum usb_port_connect_type connect_type; + usb_port_location_t location; + struct mutex status_lock; + u32 over_current_count; + u8 portnum; + u32 quirks; + unsigned int is_superspeed:1; + unsigned int usb3_lpm_u1_permit:1; + unsigned int usb3_lpm_u2_permit:1; +}; + +#define to_usb_port(_dev) \ + container_of(_dev, struct usb_port, dev) + +extern int usb_hub_create_port_device(struct usb_hub *hub, + int port1); +extern void usb_hub_remove_port_device(struct usb_hub *hub, + int port1); +extern int usb_hub_set_port_power(struct usb_device *hdev, struct usb_hub *hub, + int port1, bool set); +extern struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev); +extern int hub_port_debounce(struct usb_hub *hub, int port1, + bool must_be_connected); +extern int usb_clear_port_feature(struct usb_device *hdev, + int port1, int feature); +extern int usb_hub_port_status(struct usb_hub *hub, int port1, + u16 *status, u16 *change); +extern int usb_port_is_power_on(struct usb_hub *hub, unsigned int portstatus); + +static inline bool hub_is_port_power_switchable(struct usb_hub *hub) +{ + __le16 hcs; + + if (!hub) + return false; + hcs = hub->descriptor->wHubCharacteristics; + return (le16_to_cpu(hcs) & HUB_CHAR_LPSM) < HUB_CHAR_NO_LPSM; +} + +static inline int hub_is_superspeed(struct usb_device *hdev) +{ + return hdev->descriptor.bDeviceProtocol == USB_HUB_PR_SS; +} + +static inline int hub_is_superspeedplus(struct usb_device *hdev) +{ + return (hdev->descriptor.bDeviceProtocol == USB_HUB_PR_SS && + le16_to_cpu(hdev->descriptor.bcdUSB) >= 0x0310 && + hdev->bos && hdev->bos->ssp_cap); +} + +static inline unsigned hub_power_on_good_delay(struct usb_hub *hub) +{ + unsigned delay = hub->descriptor->bPwrOn2PwrGood * 2; + + if (!hub->hdev->parent) /* root hub */ + return delay; + else /* Wait at least 100 msec for power to become stable */ + return max(delay, 100U); +} + +static inline int hub_port_debounce_be_connected(struct usb_hub *hub, + int port1) +{ + return hub_port_debounce(hub, port1, true); +} + +static inline int hub_port_debounce_be_stable(struct usb_hub *hub, + int port1) +{ + return hub_port_debounce(hub, port1, false); +} diff --git a/drivers/usb/core/ledtrig-usbport.c b/drivers/usb/core/ledtrig-usbport.c new file mode 100644 index 000000000..ba371a24f --- /dev/null +++ b/drivers/usb/core/ledtrig-usbport.c @@ -0,0 +1,368 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * USB port LED trigger + * + * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + */ + +#include <linux/device.h> +#include <linux/leds.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/usb.h> +#include <linux/usb/of.h> + +struct usbport_trig_data { + struct led_classdev *led_cdev; + struct list_head ports; + struct notifier_block nb; + int count; /* Amount of connected matching devices */ +}; + +struct usbport_trig_port { + struct usbport_trig_data *data; + struct usb_device *hub; + int portnum; + char *port_name; + bool observed; + struct device_attribute attr; + struct list_head list; +}; + +/*************************************** + * Helpers + ***************************************/ + +/* + * usbport_trig_usb_dev_observed - Check if dev is connected to observed port + */ +static bool usbport_trig_usb_dev_observed(struct usbport_trig_data *usbport_data, + struct usb_device *usb_dev) +{ + struct usbport_trig_port *port; + + if (!usb_dev->parent) + return false; + + list_for_each_entry(port, &usbport_data->ports, list) { + if (usb_dev->parent == port->hub && + usb_dev->portnum == port->portnum) + return port->observed; + } + + return false; +} + +static int usbport_trig_usb_dev_check(struct usb_device *usb_dev, void *data) +{ + struct usbport_trig_data *usbport_data = data; + + if (usbport_trig_usb_dev_observed(usbport_data, usb_dev)) + usbport_data->count++; + + return 0; +} + +/* + * usbport_trig_update_count - Recalculate amount of connected matching devices + */ +static void usbport_trig_update_count(struct usbport_trig_data *usbport_data) +{ + struct led_classdev *led_cdev = usbport_data->led_cdev; + + usbport_data->count = 0; + usb_for_each_dev(usbport_data, usbport_trig_usb_dev_check); + led_set_brightness(led_cdev, usbport_data->count ? LED_FULL : LED_OFF); +} + +/*************************************** + * Device attr + ***************************************/ + +static ssize_t usbport_trig_port_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usbport_trig_port *port = container_of(attr, + struct usbport_trig_port, + attr); + + return sprintf(buf, "%d\n", port->observed) + 1; +} + +static ssize_t usbport_trig_port_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct usbport_trig_port *port = container_of(attr, + struct usbport_trig_port, + attr); + + if (!strcmp(buf, "0") || !strcmp(buf, "0\n")) + port->observed = 0; + else if (!strcmp(buf, "1") || !strcmp(buf, "1\n")) + port->observed = 1; + else + return -EINVAL; + + usbport_trig_update_count(port->data); + + return size; +} + +static struct attribute *ports_attrs[] = { + NULL, +}; + +static const struct attribute_group ports_group = { + .name = "ports", + .attrs = ports_attrs, +}; + +/*************************************** + * Adding & removing ports + ***************************************/ + +/* + * usbport_trig_port_observed - Check if port should be observed + */ +static bool usbport_trig_port_observed(struct usbport_trig_data *usbport_data, + struct usb_device *usb_dev, int port1) +{ + struct device *dev = usbport_data->led_cdev->dev; + struct device_node *led_np = dev->of_node; + struct of_phandle_args args; + struct device_node *port_np; + int count, i; + + if (!led_np) + return false; + + /* + * Get node of port being added + * + * FIXME: This is really the device node of the connected device + */ + port_np = usb_of_get_device_node(usb_dev, port1); + if (!port_np) + return false; + + of_node_put(port_np); + + /* Amount of trigger sources for this LED */ + count = of_count_phandle_with_args(led_np, "trigger-sources", + "#trigger-source-cells"); + if (count < 0) { + dev_warn(dev, "Failed to get trigger sources for %pOF\n", + led_np); + return false; + } + + /* Check list of sources for this specific port */ + for (i = 0; i < count; i++) { + int err; + + err = of_parse_phandle_with_args(led_np, "trigger-sources", + "#trigger-source-cells", i, + &args); + if (err) { + dev_err(dev, "Failed to get trigger source phandle at index %d: %d\n", + i, err); + continue; + } + + of_node_put(args.np); + + if (args.np == port_np) + return true; + } + + return false; +} + +static int usbport_trig_add_port(struct usbport_trig_data *usbport_data, + struct usb_device *usb_dev, + const char *hub_name, int portnum) +{ + struct led_classdev *led_cdev = usbport_data->led_cdev; + struct usbport_trig_port *port; + size_t len; + int err; + + port = kzalloc(sizeof(*port), GFP_KERNEL); + if (!port) { + err = -ENOMEM; + goto err_out; + } + + port->data = usbport_data; + port->hub = usb_dev; + port->portnum = portnum; + port->observed = usbport_trig_port_observed(usbport_data, usb_dev, + portnum); + + len = strlen(hub_name) + 8; + port->port_name = kzalloc(len, GFP_KERNEL); + if (!port->port_name) { + err = -ENOMEM; + goto err_free_port; + } + snprintf(port->port_name, len, "%s-port%d", hub_name, portnum); + + sysfs_attr_init(&port->attr.attr); + port->attr.attr.name = port->port_name; + port->attr.attr.mode = S_IRUSR | S_IWUSR; + port->attr.show = usbport_trig_port_show; + port->attr.store = usbport_trig_port_store; + + err = sysfs_add_file_to_group(&led_cdev->dev->kobj, &port->attr.attr, + ports_group.name); + if (err) + goto err_free_port_name; + + list_add_tail(&port->list, &usbport_data->ports); + + return 0; + +err_free_port_name: + kfree(port->port_name); +err_free_port: + kfree(port); +err_out: + return err; +} + +static int usbport_trig_add_usb_dev_ports(struct usb_device *usb_dev, + void *data) +{ + struct usbport_trig_data *usbport_data = data; + int i; + + for (i = 1; i <= usb_dev->maxchild; i++) + usbport_trig_add_port(usbport_data, usb_dev, + dev_name(&usb_dev->dev), i); + + return 0; +} + +static void usbport_trig_remove_port(struct usbport_trig_data *usbport_data, + struct usbport_trig_port *port) +{ + struct led_classdev *led_cdev = usbport_data->led_cdev; + + list_del(&port->list); + sysfs_remove_file_from_group(&led_cdev->dev->kobj, &port->attr.attr, + ports_group.name); + kfree(port->port_name); + kfree(port); +} + +static void usbport_trig_remove_usb_dev_ports(struct usbport_trig_data *usbport_data, + struct usb_device *usb_dev) +{ + struct usbport_trig_port *port, *tmp; + + list_for_each_entry_safe(port, tmp, &usbport_data->ports, list) { + if (port->hub == usb_dev) + usbport_trig_remove_port(usbport_data, port); + } +} + +/*************************************** + * Init, exit, etc. + ***************************************/ + +static int usbport_trig_notify(struct notifier_block *nb, unsigned long action, + void *data) +{ + struct usbport_trig_data *usbport_data = + container_of(nb, struct usbport_trig_data, nb); + struct led_classdev *led_cdev = usbport_data->led_cdev; + struct usb_device *usb_dev = data; + bool observed; + + observed = usbport_trig_usb_dev_observed(usbport_data, usb_dev); + + switch (action) { + case USB_DEVICE_ADD: + usbport_trig_add_usb_dev_ports(usb_dev, usbport_data); + if (observed && usbport_data->count++ == 0) + led_set_brightness(led_cdev, LED_FULL); + return NOTIFY_OK; + case USB_DEVICE_REMOVE: + usbport_trig_remove_usb_dev_ports(usbport_data, usb_dev); + if (observed && --usbport_data->count == 0) + led_set_brightness(led_cdev, LED_OFF); + return NOTIFY_OK; + } + + return NOTIFY_DONE; +} + +static int usbport_trig_activate(struct led_classdev *led_cdev) +{ + struct usbport_trig_data *usbport_data; + int err; + + usbport_data = kzalloc(sizeof(*usbport_data), GFP_KERNEL); + if (!usbport_data) + return -ENOMEM; + usbport_data->led_cdev = led_cdev; + + /* List of ports */ + INIT_LIST_HEAD(&usbport_data->ports); + err = sysfs_create_group(&led_cdev->dev->kobj, &ports_group); + if (err) + goto err_free; + usb_for_each_dev(usbport_data, usbport_trig_add_usb_dev_ports); + usbport_trig_update_count(usbport_data); + + /* Notifications */ + usbport_data->nb.notifier_call = usbport_trig_notify; + led_set_trigger_data(led_cdev, usbport_data); + usb_register_notify(&usbport_data->nb); + return 0; + +err_free: + kfree(usbport_data); + return err; +} + +static void usbport_trig_deactivate(struct led_classdev *led_cdev) +{ + struct usbport_trig_data *usbport_data = led_get_trigger_data(led_cdev); + struct usbport_trig_port *port, *tmp; + + list_for_each_entry_safe(port, tmp, &usbport_data->ports, list) { + usbport_trig_remove_port(usbport_data, port); + } + + sysfs_remove_group(&led_cdev->dev->kobj, &ports_group); + + usb_unregister_notify(&usbport_data->nb); + + kfree(usbport_data); +} + +static struct led_trigger usbport_led_trigger = { + .name = "usbport", + .activate = usbport_trig_activate, + .deactivate = usbport_trig_deactivate, +}; + +static int __init usbport_trig_init(void) +{ + return led_trigger_register(&usbport_led_trigger); +} + +static void __exit usbport_trig_exit(void) +{ + led_trigger_unregister(&usbport_led_trigger); +} + +module_init(usbport_trig_init); +module_exit(usbport_trig_exit); + +MODULE_AUTHOR("RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl>"); +MODULE_DESCRIPTION("USB port trigger"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c new file mode 100644 index 000000000..1673e5d08 --- /dev/null +++ b/drivers/usb/core/message.c @@ -0,0 +1,2418 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * message.c - synchronous message handling + * + * Released under the GPLv2 only. + */ + +#include <linux/acpi.h> +#include <linux/pci.h> /* for scatterlist macros */ +#include <linux/usb.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/timer.h> +#include <linux/ctype.h> +#include <linux/nls.h> +#include <linux/device.h> +#include <linux/scatterlist.h> +#include <linux/usb/cdc.h> +#include <linux/usb/quirks.h> +#include <linux/usb/hcd.h> /* for usbcore internals */ +#include <linux/usb/of.h> +#include <asm/byteorder.h> + +#include "usb.h" + +static void cancel_async_set_config(struct usb_device *udev); + +struct api_context { + struct completion done; + int status; +}; + +static void usb_api_blocking_completion(struct urb *urb) +{ + struct api_context *ctx = urb->context; + + ctx->status = urb->status; + complete(&ctx->done); +} + + +/* + * Starts urb and waits for completion or timeout. Note that this call + * is NOT interruptible. Many device driver i/o requests should be + * interruptible and therefore these drivers should implement their + * own interruptible routines. + */ +static int usb_start_wait_urb(struct urb *urb, int timeout, int *actual_length) +{ + struct api_context ctx; + unsigned long expire; + int retval; + + init_completion(&ctx.done); + urb->context = &ctx; + urb->actual_length = 0; + retval = usb_submit_urb(urb, GFP_NOIO); + if (unlikely(retval)) + goto out; + + expire = timeout ? msecs_to_jiffies(timeout) : MAX_SCHEDULE_TIMEOUT; + if (!wait_for_completion_timeout(&ctx.done, expire)) { + usb_kill_urb(urb); + retval = (ctx.status == -ENOENT ? -ETIMEDOUT : ctx.status); + + dev_dbg(&urb->dev->dev, + "%s timed out on ep%d%s len=%u/%u\n", + current->comm, + usb_endpoint_num(&urb->ep->desc), + usb_urb_dir_in(urb) ? "in" : "out", + urb->actual_length, + urb->transfer_buffer_length); + } else + retval = ctx.status; +out: + if (actual_length) + *actual_length = urb->actual_length; + + usb_free_urb(urb); + return retval; +} + +/*-------------------------------------------------------------------*/ +/* returns status (negative) or length (positive) */ +static int usb_internal_control_msg(struct usb_device *usb_dev, + unsigned int pipe, + struct usb_ctrlrequest *cmd, + void *data, int len, int timeout) +{ + struct urb *urb; + int retv; + int length; + + urb = usb_alloc_urb(0, GFP_NOIO); + if (!urb) + return -ENOMEM; + + usb_fill_control_urb(urb, usb_dev, pipe, (unsigned char *)cmd, data, + len, usb_api_blocking_completion, NULL); + + retv = usb_start_wait_urb(urb, timeout, &length); + if (retv < 0) + return retv; + else + return length; +} + +/** + * usb_control_msg - Builds a control urb, sends it off and waits for completion + * @dev: pointer to the usb device to send the message to + * @pipe: endpoint "pipe" to send the message to + * @request: USB message request value + * @requesttype: USB message request type value + * @value: USB message value + * @index: USB message index value + * @data: pointer to the data to send + * @size: length in bytes of the data to send + * @timeout: time in msecs to wait for the message to complete before timing + * out (if 0 the wait is forever) + * + * Context: task context, might sleep. + * + * This function sends a simple control message to a specified endpoint and + * waits for the message to complete, or timeout. + * + * Don't use this function from within an interrupt context. If you need + * an asynchronous message, or need to send a message from within interrupt + * context, use usb_submit_urb(). If a thread in your driver uses this call, + * make sure your disconnect() method can wait for it to complete. Since you + * don't have a handle on the URB used, you can't cancel the request. + * + * Return: If successful, the number of bytes transferred. Otherwise, a negative + * error number. + */ +int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request, + __u8 requesttype, __u16 value, __u16 index, void *data, + __u16 size, int timeout) +{ + struct usb_ctrlrequest *dr; + int ret; + + dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO); + if (!dr) + return -ENOMEM; + + dr->bRequestType = requesttype; + dr->bRequest = request; + dr->wValue = cpu_to_le16(value); + dr->wIndex = cpu_to_le16(index); + dr->wLength = cpu_to_le16(size); + + ret = usb_internal_control_msg(dev, pipe, dr, data, size, timeout); + + /* Linger a bit, prior to the next control message. */ + if (dev->quirks & USB_QUIRK_DELAY_CTRL_MSG) + msleep(200); + + kfree(dr); + + return ret; +} +EXPORT_SYMBOL_GPL(usb_control_msg); + +/** + * usb_control_msg_send - Builds a control "send" message, sends it off and waits for completion + * @dev: pointer to the usb device to send the message to + * @endpoint: endpoint to send the message to + * @request: USB message request value + * @requesttype: USB message request type value + * @value: USB message value + * @index: USB message index value + * @driver_data: pointer to the data to send + * @size: length in bytes of the data to send + * @timeout: time in msecs to wait for the message to complete before timing + * out (if 0 the wait is forever) + * @memflags: the flags for memory allocation for buffers + * + * Context: !in_interrupt () + * + * This function sends a control message to a specified endpoint that is not + * expected to fill in a response (i.e. a "send message") and waits for the + * message to complete, or timeout. + * + * Do not use this function from within an interrupt context. If you need + * an asynchronous message, or need to send a message from within interrupt + * context, use usb_submit_urb(). If a thread in your driver uses this call, + * make sure your disconnect() method can wait for it to complete. Since you + * don't have a handle on the URB used, you can't cancel the request. + * + * The data pointer can be made to a reference on the stack, or anywhere else, + * as it will not be modified at all. This does not have the restriction that + * usb_control_msg() has where the data pointer must be to dynamically allocated + * memory (i.e. memory that can be successfully DMAed to a device). + * + * Return: If successful, 0 is returned, Otherwise, a negative error number. + */ +int usb_control_msg_send(struct usb_device *dev, __u8 endpoint, __u8 request, + __u8 requesttype, __u16 value, __u16 index, + const void *driver_data, __u16 size, int timeout, + gfp_t memflags) +{ + unsigned int pipe = usb_sndctrlpipe(dev, endpoint); + int ret; + u8 *data = NULL; + + if (size) { + data = kmemdup(driver_data, size, memflags); + if (!data) + return -ENOMEM; + } + + ret = usb_control_msg(dev, pipe, request, requesttype, value, index, + data, size, timeout); + kfree(data); + + if (ret < 0) + return ret; + + return 0; +} +EXPORT_SYMBOL_GPL(usb_control_msg_send); + +/** + * usb_control_msg_recv - Builds a control "receive" message, sends it off and waits for completion + * @dev: pointer to the usb device to send the message to + * @endpoint: endpoint to send the message to + * @request: USB message request value + * @requesttype: USB message request type value + * @value: USB message value + * @index: USB message index value + * @driver_data: pointer to the data to be filled in by the message + * @size: length in bytes of the data to be received + * @timeout: time in msecs to wait for the message to complete before timing + * out (if 0 the wait is forever) + * @memflags: the flags for memory allocation for buffers + * + * Context: !in_interrupt () + * + * This function sends a control message to a specified endpoint that is + * expected to fill in a response (i.e. a "receive message") and waits for the + * message to complete, or timeout. + * + * Do not use this function from within an interrupt context. If you need + * an asynchronous message, or need to send a message from within interrupt + * context, use usb_submit_urb(). If a thread in your driver uses this call, + * make sure your disconnect() method can wait for it to complete. Since you + * don't have a handle on the URB used, you can't cancel the request. + * + * The data pointer can be made to a reference on the stack, or anywhere else + * that can be successfully written to. This function does not have the + * restriction that usb_control_msg() has where the data pointer must be to + * dynamically allocated memory (i.e. memory that can be successfully DMAed to a + * device). + * + * The "whole" message must be properly received from the device in order for + * this function to be successful. If a device returns less than the expected + * amount of data, then the function will fail. Do not use this for messages + * where a variable amount of data might be returned. + * + * Return: If successful, 0 is returned, Otherwise, a negative error number. + */ +int usb_control_msg_recv(struct usb_device *dev, __u8 endpoint, __u8 request, + __u8 requesttype, __u16 value, __u16 index, + void *driver_data, __u16 size, int timeout, + gfp_t memflags) +{ + unsigned int pipe = usb_rcvctrlpipe(dev, endpoint); + int ret; + u8 *data; + + if (!size || !driver_data) + return -EINVAL; + + data = kmalloc(size, memflags); + if (!data) + return -ENOMEM; + + ret = usb_control_msg(dev, pipe, request, requesttype, value, index, + data, size, timeout); + + if (ret < 0) + goto exit; + + if (ret == size) { + memcpy(driver_data, data, size); + ret = 0; + } else { + ret = -EREMOTEIO; + } + +exit: + kfree(data); + return ret; +} +EXPORT_SYMBOL_GPL(usb_control_msg_recv); + +/** + * usb_interrupt_msg - Builds an interrupt urb, sends it off and waits for completion + * @usb_dev: pointer to the usb device to send the message to + * @pipe: endpoint "pipe" to send the message to + * @data: pointer to the data to send + * @len: length in bytes of the data to send + * @actual_length: pointer to a location to put the actual length transferred + * in bytes + * @timeout: time in msecs to wait for the message to complete before + * timing out (if 0 the wait is forever) + * + * Context: task context, might sleep. + * + * This function sends a simple interrupt message to a specified endpoint and + * waits for the message to complete, or timeout. + * + * Don't use this function from within an interrupt context. If you need + * an asynchronous message, or need to send a message from within interrupt + * context, use usb_submit_urb() If a thread in your driver uses this call, + * make sure your disconnect() method can wait for it to complete. Since you + * don't have a handle on the URB used, you can't cancel the request. + * + * Return: + * If successful, 0. Otherwise a negative error number. The number of actual + * bytes transferred will be stored in the @actual_length parameter. + */ +int usb_interrupt_msg(struct usb_device *usb_dev, unsigned int pipe, + void *data, int len, int *actual_length, int timeout) +{ + return usb_bulk_msg(usb_dev, pipe, data, len, actual_length, timeout); +} +EXPORT_SYMBOL_GPL(usb_interrupt_msg); + +/** + * usb_bulk_msg - Builds a bulk urb, sends it off and waits for completion + * @usb_dev: pointer to the usb device to send the message to + * @pipe: endpoint "pipe" to send the message to + * @data: pointer to the data to send + * @len: length in bytes of the data to send + * @actual_length: pointer to a location to put the actual length transferred + * in bytes + * @timeout: time in msecs to wait for the message to complete before + * timing out (if 0 the wait is forever) + * + * Context: task context, might sleep. + * + * This function sends a simple bulk message to a specified endpoint + * and waits for the message to complete, or timeout. + * + * Don't use this function from within an interrupt context. If you need + * an asynchronous message, or need to send a message from within interrupt + * context, use usb_submit_urb() If a thread in your driver uses this call, + * make sure your disconnect() method can wait for it to complete. Since you + * don't have a handle on the URB used, you can't cancel the request. + * + * Because there is no usb_interrupt_msg() and no USBDEVFS_INTERRUPT ioctl, + * users are forced to abuse this routine by using it to submit URBs for + * interrupt endpoints. We will take the liberty of creating an interrupt URB + * (with the default interval) if the target is an interrupt endpoint. + * + * Return: + * If successful, 0. Otherwise a negative error number. The number of actual + * bytes transferred will be stored in the @actual_length parameter. + * + */ +int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe, + void *data, int len, int *actual_length, int timeout) +{ + struct urb *urb; + struct usb_host_endpoint *ep; + + ep = usb_pipe_endpoint(usb_dev, pipe); + if (!ep || len < 0) + return -EINVAL; + + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) + return -ENOMEM; + + if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_INT) { + pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30); + usb_fill_int_urb(urb, usb_dev, pipe, data, len, + usb_api_blocking_completion, NULL, + ep->desc.bInterval); + } else + usb_fill_bulk_urb(urb, usb_dev, pipe, data, len, + usb_api_blocking_completion, NULL); + + return usb_start_wait_urb(urb, timeout, actual_length); +} +EXPORT_SYMBOL_GPL(usb_bulk_msg); + +/*-------------------------------------------------------------------*/ + +static void sg_clean(struct usb_sg_request *io) +{ + if (io->urbs) { + while (io->entries--) + usb_free_urb(io->urbs[io->entries]); + kfree(io->urbs); + io->urbs = NULL; + } + io->dev = NULL; +} + +static void sg_complete(struct urb *urb) +{ + unsigned long flags; + struct usb_sg_request *io = urb->context; + int status = urb->status; + + spin_lock_irqsave(&io->lock, flags); + + /* In 2.5 we require hcds' endpoint queues not to progress after fault + * reports, until the completion callback (this!) returns. That lets + * device driver code (like this routine) unlink queued urbs first, + * if it needs to, since the HC won't work on them at all. So it's + * not possible for page N+1 to overwrite page N, and so on. + * + * That's only for "hard" faults; "soft" faults (unlinks) sometimes + * complete before the HCD can get requests away from hardware, + * though never during cleanup after a hard fault. + */ + if (io->status + && (io->status != -ECONNRESET + || status != -ECONNRESET) + && urb->actual_length) { + dev_err(io->dev->bus->controller, + "dev %s ep%d%s scatterlist error %d/%d\n", + io->dev->devpath, + usb_endpoint_num(&urb->ep->desc), + usb_urb_dir_in(urb) ? "in" : "out", + status, io->status); + /* BUG (); */ + } + + if (io->status == 0 && status && status != -ECONNRESET) { + int i, found, retval; + + io->status = status; + + /* the previous urbs, and this one, completed already. + * unlink pending urbs so they won't rx/tx bad data. + * careful: unlink can sometimes be synchronous... + */ + spin_unlock_irqrestore(&io->lock, flags); + for (i = 0, found = 0; i < io->entries; i++) { + if (!io->urbs[i]) + continue; + if (found) { + usb_block_urb(io->urbs[i]); + retval = usb_unlink_urb(io->urbs[i]); + if (retval != -EINPROGRESS && + retval != -ENODEV && + retval != -EBUSY && + retval != -EIDRM) + dev_err(&io->dev->dev, + "%s, unlink --> %d\n", + __func__, retval); + } else if (urb == io->urbs[i]) + found = 1; + } + spin_lock_irqsave(&io->lock, flags); + } + + /* on the last completion, signal usb_sg_wait() */ + io->bytes += urb->actual_length; + io->count--; + if (!io->count) + complete(&io->complete); + + spin_unlock_irqrestore(&io->lock, flags); +} + + +/** + * usb_sg_init - initializes scatterlist-based bulk/interrupt I/O request + * @io: request block being initialized. until usb_sg_wait() returns, + * treat this as a pointer to an opaque block of memory, + * @dev: the usb device that will send or receive the data + * @pipe: endpoint "pipe" used to transfer the data + * @period: polling rate for interrupt endpoints, in frames or + * (for high speed endpoints) microframes; ignored for bulk + * @sg: scatterlist entries + * @nents: how many entries in the scatterlist + * @length: how many bytes to send from the scatterlist, or zero to + * send every byte identified in the list. + * @mem_flags: SLAB_* flags affecting memory allocations in this call + * + * This initializes a scatter/gather request, allocating resources such as + * I/O mappings and urb memory (except maybe memory used by USB controller + * drivers). + * + * The request must be issued using usb_sg_wait(), which waits for the I/O to + * complete (or to be canceled) and then cleans up all resources allocated by + * usb_sg_init(). + * + * The request may be canceled with usb_sg_cancel(), either before or after + * usb_sg_wait() is called. + * + * Return: Zero for success, else a negative errno value. + */ +int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev, + unsigned pipe, unsigned period, struct scatterlist *sg, + int nents, size_t length, gfp_t mem_flags) +{ + int i; + int urb_flags; + int use_sg; + + if (!io || !dev || !sg + || usb_pipecontrol(pipe) + || usb_pipeisoc(pipe) + || nents <= 0) + return -EINVAL; + + spin_lock_init(&io->lock); + io->dev = dev; + io->pipe = pipe; + + if (dev->bus->sg_tablesize > 0) { + use_sg = true; + io->entries = 1; + } else { + use_sg = false; + io->entries = nents; + } + + /* initialize all the urbs we'll use */ + io->urbs = kmalloc_array(io->entries, sizeof(*io->urbs), mem_flags); + if (!io->urbs) + goto nomem; + + urb_flags = URB_NO_INTERRUPT; + if (usb_pipein(pipe)) + urb_flags |= URB_SHORT_NOT_OK; + + for_each_sg(sg, sg, io->entries, i) { + struct urb *urb; + unsigned len; + + urb = usb_alloc_urb(0, mem_flags); + if (!urb) { + io->entries = i; + goto nomem; + } + io->urbs[i] = urb; + + urb->dev = NULL; + urb->pipe = pipe; + urb->interval = period; + urb->transfer_flags = urb_flags; + urb->complete = sg_complete; + urb->context = io; + urb->sg = sg; + + if (use_sg) { + /* There is no single transfer buffer */ + urb->transfer_buffer = NULL; + urb->num_sgs = nents; + + /* A length of zero means transfer the whole sg list */ + len = length; + if (len == 0) { + struct scatterlist *sg2; + int j; + + for_each_sg(sg, sg2, nents, j) + len += sg2->length; + } + } else { + /* + * Some systems can't use DMA; they use PIO instead. + * For their sakes, transfer_buffer is set whenever + * possible. + */ + if (!PageHighMem(sg_page(sg))) + urb->transfer_buffer = sg_virt(sg); + else + urb->transfer_buffer = NULL; + + len = sg->length; + if (length) { + len = min_t(size_t, len, length); + length -= len; + if (length == 0) + io->entries = i + 1; + } + } + urb->transfer_buffer_length = len; + } + io->urbs[--i]->transfer_flags &= ~URB_NO_INTERRUPT; + + /* transaction state */ + io->count = io->entries; + io->status = 0; + io->bytes = 0; + init_completion(&io->complete); + return 0; + +nomem: + sg_clean(io); + return -ENOMEM; +} +EXPORT_SYMBOL_GPL(usb_sg_init); + +/** + * usb_sg_wait - synchronously execute scatter/gather request + * @io: request block handle, as initialized with usb_sg_init(). + * some fields become accessible when this call returns. + * + * Context: task context, might sleep. + * + * This function blocks until the specified I/O operation completes. It + * leverages the grouping of the related I/O requests to get good transfer + * rates, by queueing the requests. At higher speeds, such queuing can + * significantly improve USB throughput. + * + * There are three kinds of completion for this function. + * + * (1) success, where io->status is zero. The number of io->bytes + * transferred is as requested. + * (2) error, where io->status is a negative errno value. The number + * of io->bytes transferred before the error is usually less + * than requested, and can be nonzero. + * (3) cancellation, a type of error with status -ECONNRESET that + * is initiated by usb_sg_cancel(). + * + * When this function returns, all memory allocated through usb_sg_init() or + * this call will have been freed. The request block parameter may still be + * passed to usb_sg_cancel(), or it may be freed. It could also be + * reinitialized and then reused. + * + * Data Transfer Rates: + * + * Bulk transfers are valid for full or high speed endpoints. + * The best full speed data rate is 19 packets of 64 bytes each + * per frame, or 1216 bytes per millisecond. + * The best high speed data rate is 13 packets of 512 bytes each + * per microframe, or 52 KBytes per millisecond. + * + * The reason to use interrupt transfers through this API would most likely + * be to reserve high speed bandwidth, where up to 24 KBytes per millisecond + * could be transferred. That capability is less useful for low or full + * speed interrupt endpoints, which allow at most one packet per millisecond, + * of at most 8 or 64 bytes (respectively). + * + * It is not necessary to call this function to reserve bandwidth for devices + * under an xHCI host controller, as the bandwidth is reserved when the + * configuration or interface alt setting is selected. + */ +void usb_sg_wait(struct usb_sg_request *io) +{ + int i; + int entries = io->entries; + + /* queue the urbs. */ + spin_lock_irq(&io->lock); + i = 0; + while (i < entries && !io->status) { + int retval; + + io->urbs[i]->dev = io->dev; + spin_unlock_irq(&io->lock); + + retval = usb_submit_urb(io->urbs[i], GFP_NOIO); + + switch (retval) { + /* maybe we retrying will recover */ + case -ENXIO: /* hc didn't queue this one */ + case -EAGAIN: + case -ENOMEM: + retval = 0; + yield(); + break; + + /* no error? continue immediately. + * + * NOTE: to work better with UHCI (4K I/O buffer may + * need 3K of TDs) it may be good to limit how many + * URBs are queued at once; N milliseconds? + */ + case 0: + ++i; + cpu_relax(); + break; + + /* fail any uncompleted urbs */ + default: + io->urbs[i]->status = retval; + dev_dbg(&io->dev->dev, "%s, submit --> %d\n", + __func__, retval); + usb_sg_cancel(io); + } + spin_lock_irq(&io->lock); + if (retval && (io->status == 0 || io->status == -ECONNRESET)) + io->status = retval; + } + io->count -= entries - i; + if (io->count == 0) + complete(&io->complete); + spin_unlock_irq(&io->lock); + + /* OK, yes, this could be packaged as non-blocking. + * So could the submit loop above ... but it's easier to + * solve neither problem than to solve both! + */ + wait_for_completion(&io->complete); + + sg_clean(io); +} +EXPORT_SYMBOL_GPL(usb_sg_wait); + +/** + * usb_sg_cancel - stop scatter/gather i/o issued by usb_sg_wait() + * @io: request block, initialized with usb_sg_init() + * + * This stops a request after it has been started by usb_sg_wait(). + * It can also prevents one initialized by usb_sg_init() from starting, + * so that call just frees resources allocated to the request. + */ +void usb_sg_cancel(struct usb_sg_request *io) +{ + unsigned long flags; + int i, retval; + + spin_lock_irqsave(&io->lock, flags); + if (io->status || io->count == 0) { + spin_unlock_irqrestore(&io->lock, flags); + return; + } + /* shut everything down */ + io->status = -ECONNRESET; + io->count++; /* Keep the request alive until we're done */ + spin_unlock_irqrestore(&io->lock, flags); + + for (i = io->entries - 1; i >= 0; --i) { + usb_block_urb(io->urbs[i]); + + retval = usb_unlink_urb(io->urbs[i]); + if (retval != -EINPROGRESS + && retval != -ENODEV + && retval != -EBUSY + && retval != -EIDRM) + dev_warn(&io->dev->dev, "%s, unlink --> %d\n", + __func__, retval); + } + + spin_lock_irqsave(&io->lock, flags); + io->count--; + if (!io->count) + complete(&io->complete); + spin_unlock_irqrestore(&io->lock, flags); +} +EXPORT_SYMBOL_GPL(usb_sg_cancel); + +/*-------------------------------------------------------------------*/ + +/** + * usb_get_descriptor - issues a generic GET_DESCRIPTOR request + * @dev: the device whose descriptor is being retrieved + * @type: the descriptor type (USB_DT_*) + * @index: the number of the descriptor + * @buf: where to put the descriptor + * @size: how big is "buf"? + * + * Context: task context, might sleep. + * + * Gets a USB descriptor. Convenience functions exist to simplify + * getting some types of descriptors. Use + * usb_get_string() or usb_string() for USB_DT_STRING. + * Device (USB_DT_DEVICE) and configuration descriptors (USB_DT_CONFIG) + * are part of the device structure. + * In addition to a number of USB-standard descriptors, some + * devices also use class-specific or vendor-specific descriptors. + * + * This call is synchronous, and may not be used in an interrupt context. + * + * Return: The number of bytes received on success, or else the status code + * returned by the underlying usb_control_msg() call. + */ +int usb_get_descriptor(struct usb_device *dev, unsigned char type, + unsigned char index, void *buf, int size) +{ + int i; + int result; + + if (size <= 0) /* No point in asking for no data */ + return -EINVAL; + + memset(buf, 0, size); /* Make sure we parse really received data */ + + for (i = 0; i < 3; ++i) { + /* retry on length 0 or error; some devices are flakey */ + result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, + (type << 8) + index, 0, buf, size, + USB_CTRL_GET_TIMEOUT); + if (result <= 0 && result != -ETIMEDOUT) + continue; + if (result > 1 && ((u8 *)buf)[1] != type) { + result = -ENODATA; + continue; + } + break; + } + return result; +} +EXPORT_SYMBOL_GPL(usb_get_descriptor); + +/** + * usb_get_string - gets a string descriptor + * @dev: the device whose string descriptor is being retrieved + * @langid: code for language chosen (from string descriptor zero) + * @index: the number of the descriptor + * @buf: where to put the string + * @size: how big is "buf"? + * + * Context: task context, might sleep. + * + * Retrieves a string, encoded using UTF-16LE (Unicode, 16 bits per character, + * in little-endian byte order). + * The usb_string() function will often be a convenient way to turn + * these strings into kernel-printable form. + * + * Strings may be referenced in device, configuration, interface, or other + * descriptors, and could also be used in vendor-specific ways. + * + * This call is synchronous, and may not be used in an interrupt context. + * + * Return: The number of bytes received on success, or else the status code + * returned by the underlying usb_control_msg() call. + */ +static int usb_get_string(struct usb_device *dev, unsigned short langid, + unsigned char index, void *buf, int size) +{ + int i; + int result; + + if (size <= 0) /* No point in asking for no data */ + return -EINVAL; + + for (i = 0; i < 3; ++i) { + /* retry on length 0 or stall; some devices are flakey */ + result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, + (USB_DT_STRING << 8) + index, langid, buf, size, + USB_CTRL_GET_TIMEOUT); + if (result == 0 || result == -EPIPE) + continue; + if (result > 1 && ((u8 *) buf)[1] != USB_DT_STRING) { + result = -ENODATA; + continue; + } + break; + } + return result; +} + +static void usb_try_string_workarounds(unsigned char *buf, int *length) +{ + int newlength, oldlength = *length; + + for (newlength = 2; newlength + 1 < oldlength; newlength += 2) + if (!isprint(buf[newlength]) || buf[newlength + 1]) + break; + + if (newlength > 2) { + buf[0] = newlength; + *length = newlength; + } +} + +static int usb_string_sub(struct usb_device *dev, unsigned int langid, + unsigned int index, unsigned char *buf) +{ + int rc; + + /* Try to read the string descriptor by asking for the maximum + * possible number of bytes */ + if (dev->quirks & USB_QUIRK_STRING_FETCH_255) + rc = -EIO; + else + rc = usb_get_string(dev, langid, index, buf, 255); + + /* If that failed try to read the descriptor length, then + * ask for just that many bytes */ + if (rc < 2) { + rc = usb_get_string(dev, langid, index, buf, 2); + if (rc == 2) + rc = usb_get_string(dev, langid, index, buf, buf[0]); + } + + if (rc >= 2) { + if (!buf[0] && !buf[1]) + usb_try_string_workarounds(buf, &rc); + + /* There might be extra junk at the end of the descriptor */ + if (buf[0] < rc) + rc = buf[0]; + + rc = rc - (rc & 1); /* force a multiple of two */ + } + + if (rc < 2) + rc = (rc < 0 ? rc : -EINVAL); + + return rc; +} + +static int usb_get_langid(struct usb_device *dev, unsigned char *tbuf) +{ + int err; + + if (dev->have_langid) + return 0; + + if (dev->string_langid < 0) + return -EPIPE; + + err = usb_string_sub(dev, 0, 0, tbuf); + + /* If the string was reported but is malformed, default to english + * (0x0409) */ + if (err == -ENODATA || (err > 0 && err < 4)) { + dev->string_langid = 0x0409; + dev->have_langid = 1; + dev_err(&dev->dev, + "language id specifier not provided by device, defaulting to English\n"); + return 0; + } + + /* In case of all other errors, we assume the device is not able to + * deal with strings at all. Set string_langid to -1 in order to + * prevent any string to be retrieved from the device */ + if (err < 0) { + dev_info(&dev->dev, "string descriptor 0 read error: %d\n", + err); + dev->string_langid = -1; + return -EPIPE; + } + + /* always use the first langid listed */ + dev->string_langid = tbuf[2] | (tbuf[3] << 8); + dev->have_langid = 1; + dev_dbg(&dev->dev, "default language 0x%04x\n", + dev->string_langid); + return 0; +} + +/** + * usb_string - returns UTF-8 version of a string descriptor + * @dev: the device whose string descriptor is being retrieved + * @index: the number of the descriptor + * @buf: where to put the string + * @size: how big is "buf"? + * + * Context: task context, might sleep. + * + * This converts the UTF-16LE encoded strings returned by devices, from + * usb_get_string_descriptor(), to null-terminated UTF-8 encoded ones + * that are more usable in most kernel contexts. Note that this function + * chooses strings in the first language supported by the device. + * + * This call is synchronous, and may not be used in an interrupt context. + * + * Return: length of the string (>= 0) or usb_control_msg status (< 0). + */ +int usb_string(struct usb_device *dev, int index, char *buf, size_t size) +{ + unsigned char *tbuf; + int err; + + if (dev->state == USB_STATE_SUSPENDED) + return -EHOSTUNREACH; + if (size <= 0 || !buf) + return -EINVAL; + buf[0] = 0; + if (index <= 0 || index >= 256) + return -EINVAL; + tbuf = kmalloc(256, GFP_NOIO); + if (!tbuf) + return -ENOMEM; + + err = usb_get_langid(dev, tbuf); + if (err < 0) + goto errout; + + err = usb_string_sub(dev, dev->string_langid, index, tbuf); + if (err < 0) + goto errout; + + size--; /* leave room for trailing NULL char in output buffer */ + err = utf16s_to_utf8s((wchar_t *) &tbuf[2], (err - 2) / 2, + UTF16_LITTLE_ENDIAN, buf, size); + buf[err] = 0; + + if (tbuf[1] != USB_DT_STRING) + dev_dbg(&dev->dev, + "wrong descriptor type %02x for string %d (\"%s\")\n", + tbuf[1], index, buf); + + errout: + kfree(tbuf); + return err; +} +EXPORT_SYMBOL_GPL(usb_string); + +/* one UTF-8-encoded 16-bit character has at most three bytes */ +#define MAX_USB_STRING_SIZE (127 * 3 + 1) + +/** + * usb_cache_string - read a string descriptor and cache it for later use + * @udev: the device whose string descriptor is being read + * @index: the descriptor index + * + * Return: A pointer to a kmalloc'ed buffer containing the descriptor string, + * or %NULL if the index is 0 or the string could not be read. + */ +char *usb_cache_string(struct usb_device *udev, int index) +{ + char *buf; + char *smallbuf = NULL; + int len; + + if (index <= 0) + return NULL; + + buf = kmalloc(MAX_USB_STRING_SIZE, GFP_NOIO); + if (buf) { + len = usb_string(udev, index, buf, MAX_USB_STRING_SIZE); + if (len > 0) { + smallbuf = kmalloc(++len, GFP_NOIO); + if (!smallbuf) + return buf; + memcpy(smallbuf, buf, len); + } + kfree(buf); + } + return smallbuf; +} + +/* + * usb_get_device_descriptor - read the device descriptor + * @udev: the device whose device descriptor should be read + * + * Context: task context, might sleep. + * + * Not exported, only for use by the core. If drivers really want to read + * the device descriptor directly, they can call usb_get_descriptor() with + * type = USB_DT_DEVICE and index = 0. + * + * Returns: a pointer to a dynamically allocated usb_device_descriptor + * structure (which the caller must deallocate), or an ERR_PTR value. + */ +struct usb_device_descriptor *usb_get_device_descriptor(struct usb_device *udev) +{ + struct usb_device_descriptor *desc; + int ret; + + desc = kmalloc(sizeof(*desc), GFP_NOIO); + if (!desc) + return ERR_PTR(-ENOMEM); + + ret = usb_get_descriptor(udev, USB_DT_DEVICE, 0, desc, sizeof(*desc)); + if (ret == sizeof(*desc)) + return desc; + + if (ret >= 0) + ret = -EMSGSIZE; + kfree(desc); + return ERR_PTR(ret); +} + +/* + * usb_set_isoch_delay - informs the device of the packet transmit delay + * @dev: the device whose delay is to be informed + * Context: task context, might sleep + * + * Since this is an optional request, we don't bother if it fails. + */ +int usb_set_isoch_delay(struct usb_device *dev) +{ + /* skip hub devices */ + if (dev->descriptor.bDeviceClass == USB_CLASS_HUB) + return 0; + + /* skip non-SS/non-SSP devices */ + if (dev->speed < USB_SPEED_SUPER) + return 0; + + return usb_control_msg_send(dev, 0, + USB_REQ_SET_ISOCH_DELAY, + USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + dev->hub_delay, 0, NULL, 0, + USB_CTRL_SET_TIMEOUT, + GFP_NOIO); +} + +/** + * usb_get_status - issues a GET_STATUS call + * @dev: the device whose status is being checked + * @recip: USB_RECIP_*; for device, interface, or endpoint + * @type: USB_STATUS_TYPE_*; for standard or PTM status types + * @target: zero (for device), else interface or endpoint number + * @data: pointer to two bytes of bitmap data + * + * Context: task context, might sleep. + * + * Returns device, interface, or endpoint status. Normally only of + * interest to see if the device is self powered, or has enabled the + * remote wakeup facility; or whether a bulk or interrupt endpoint + * is halted ("stalled"). + * + * Bits in these status bitmaps are set using the SET_FEATURE request, + * and cleared using the CLEAR_FEATURE request. The usb_clear_halt() + * function should be used to clear halt ("stall") status. + * + * This call is synchronous, and may not be used in an interrupt context. + * + * Returns 0 and the status value in *@data (in host byte order) on success, + * or else the status code from the underlying usb_control_msg() call. + */ +int usb_get_status(struct usb_device *dev, int recip, int type, int target, + void *data) +{ + int ret; + void *status; + int length; + + switch (type) { + case USB_STATUS_TYPE_STANDARD: + length = 2; + break; + case USB_STATUS_TYPE_PTM: + if (recip != USB_RECIP_DEVICE) + return -EINVAL; + + length = 4; + break; + default: + return -EINVAL; + } + + status = kmalloc(length, GFP_KERNEL); + if (!status) + return -ENOMEM; + + ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + USB_REQ_GET_STATUS, USB_DIR_IN | recip, USB_STATUS_TYPE_STANDARD, + target, status, length, USB_CTRL_GET_TIMEOUT); + + switch (ret) { + case 4: + if (type != USB_STATUS_TYPE_PTM) { + ret = -EIO; + break; + } + + *(u32 *) data = le32_to_cpu(*(__le32 *) status); + ret = 0; + break; + case 2: + if (type != USB_STATUS_TYPE_STANDARD) { + ret = -EIO; + break; + } + + *(u16 *) data = le16_to_cpu(*(__le16 *) status); + ret = 0; + break; + default: + ret = -EIO; + } + + kfree(status); + return ret; +} +EXPORT_SYMBOL_GPL(usb_get_status); + +/** + * usb_clear_halt - tells device to clear endpoint halt/stall condition + * @dev: device whose endpoint is halted + * @pipe: endpoint "pipe" being cleared + * + * Context: task context, might sleep. + * + * This is used to clear halt conditions for bulk and interrupt endpoints, + * as reported by URB completion status. Endpoints that are halted are + * sometimes referred to as being "stalled". Such endpoints are unable + * to transmit or receive data until the halt status is cleared. Any URBs + * queued for such an endpoint should normally be unlinked by the driver + * before clearing the halt condition, as described in sections 5.7.5 + * and 5.8.5 of the USB 2.0 spec. + * + * Note that control and isochronous endpoints don't halt, although control + * endpoints report "protocol stall" (for unsupported requests) using the + * same status code used to report a true stall. + * + * This call is synchronous, and may not be used in an interrupt context. + * + * Return: Zero on success, or else the status code returned by the + * underlying usb_control_msg() call. + */ +int usb_clear_halt(struct usb_device *dev, int pipe) +{ + int result; + int endp = usb_pipeendpoint(pipe); + + if (usb_pipein(pipe)) + endp |= USB_DIR_IN; + + /* we don't care if it wasn't halted first. in fact some devices + * (like some ibmcam model 1 units) seem to expect hosts to make + * this request for iso endpoints, which can't halt! + */ + result = usb_control_msg_send(dev, 0, + USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT, + USB_ENDPOINT_HALT, endp, NULL, 0, + USB_CTRL_SET_TIMEOUT, GFP_NOIO); + + /* don't un-halt or force to DATA0 except on success */ + if (result) + return result; + + /* NOTE: seems like Microsoft and Apple don't bother verifying + * the clear "took", so some devices could lock up if you check... + * such as the Hagiwara FlashGate DUAL. So we won't bother. + * + * NOTE: make sure the logic here doesn't diverge much from + * the copy in usb-storage, for as long as we need two copies. + */ + + usb_reset_endpoint(dev, endp); + + return 0; +} +EXPORT_SYMBOL_GPL(usb_clear_halt); + +static int create_intf_ep_devs(struct usb_interface *intf) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct usb_host_interface *alt = intf->cur_altsetting; + int i; + + if (intf->ep_devs_created || intf->unregistering) + return 0; + + for (i = 0; i < alt->desc.bNumEndpoints; ++i) + (void) usb_create_ep_devs(&intf->dev, &alt->endpoint[i], udev); + intf->ep_devs_created = 1; + return 0; +} + +static void remove_intf_ep_devs(struct usb_interface *intf) +{ + struct usb_host_interface *alt = intf->cur_altsetting; + int i; + + if (!intf->ep_devs_created) + return; + + for (i = 0; i < alt->desc.bNumEndpoints; ++i) + usb_remove_ep_devs(&alt->endpoint[i]); + intf->ep_devs_created = 0; +} + +/** + * usb_disable_endpoint -- Disable an endpoint by address + * @dev: the device whose endpoint is being disabled + * @epaddr: the endpoint's address. Endpoint number for output, + * endpoint number + USB_DIR_IN for input + * @reset_hardware: flag to erase any endpoint state stored in the + * controller hardware + * + * Disables the endpoint for URB submission and nukes all pending URBs. + * If @reset_hardware is set then also deallocates hcd/hardware state + * for the endpoint. + */ +void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr, + bool reset_hardware) +{ + unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK; + struct usb_host_endpoint *ep; + + if (!dev) + return; + + if (usb_endpoint_out(epaddr)) { + ep = dev->ep_out[epnum]; + if (reset_hardware && epnum != 0) + dev->ep_out[epnum] = NULL; + } else { + ep = dev->ep_in[epnum]; + if (reset_hardware && epnum != 0) + dev->ep_in[epnum] = NULL; + } + if (ep) { + ep->enabled = 0; + usb_hcd_flush_endpoint(dev, ep); + if (reset_hardware) + usb_hcd_disable_endpoint(dev, ep); + } +} + +/** + * usb_reset_endpoint - Reset an endpoint's state. + * @dev: the device whose endpoint is to be reset + * @epaddr: the endpoint's address. Endpoint number for output, + * endpoint number + USB_DIR_IN for input + * + * Resets any host-side endpoint state such as the toggle bit, + * sequence number or current window. + */ +void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr) +{ + unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK; + struct usb_host_endpoint *ep; + + if (usb_endpoint_out(epaddr)) + ep = dev->ep_out[epnum]; + else + ep = dev->ep_in[epnum]; + if (ep) + usb_hcd_reset_endpoint(dev, ep); +} +EXPORT_SYMBOL_GPL(usb_reset_endpoint); + + +/** + * usb_disable_interface -- Disable all endpoints for an interface + * @dev: the device whose interface is being disabled + * @intf: pointer to the interface descriptor + * @reset_hardware: flag to erase any endpoint state stored in the + * controller hardware + * + * Disables all the endpoints for the interface's current altsetting. + */ +void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf, + bool reset_hardware) +{ + struct usb_host_interface *alt = intf->cur_altsetting; + int i; + + for (i = 0; i < alt->desc.bNumEndpoints; ++i) { + usb_disable_endpoint(dev, + alt->endpoint[i].desc.bEndpointAddress, + reset_hardware); + } +} + +/* + * usb_disable_device_endpoints -- Disable all endpoints for a device + * @dev: the device whose endpoints are being disabled + * @skip_ep0: 0 to disable endpoint 0, 1 to skip it. + */ +static void usb_disable_device_endpoints(struct usb_device *dev, int skip_ep0) +{ + struct usb_hcd *hcd = bus_to_hcd(dev->bus); + int i; + + if (hcd->driver->check_bandwidth) { + /* First pass: Cancel URBs, leave endpoint pointers intact. */ + for (i = skip_ep0; i < 16; ++i) { + usb_disable_endpoint(dev, i, false); + usb_disable_endpoint(dev, i + USB_DIR_IN, false); + } + /* Remove endpoints from the host controller internal state */ + mutex_lock(hcd->bandwidth_mutex); + usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL); + mutex_unlock(hcd->bandwidth_mutex); + } + /* Second pass: remove endpoint pointers */ + for (i = skip_ep0; i < 16; ++i) { + usb_disable_endpoint(dev, i, true); + usb_disable_endpoint(dev, i + USB_DIR_IN, true); + } +} + +/** + * usb_disable_device - Disable all the endpoints for a USB device + * @dev: the device whose endpoints are being disabled + * @skip_ep0: 0 to disable endpoint 0, 1 to skip it. + * + * Disables all the device's endpoints, potentially including endpoint 0. + * Deallocates hcd/hardware state for the endpoints (nuking all or most + * pending urbs) and usbcore state for the interfaces, so that usbcore + * must usb_set_configuration() before any interfaces could be used. + */ +void usb_disable_device(struct usb_device *dev, int skip_ep0) +{ + int i; + + /* getting rid of interfaces will disconnect + * any drivers bound to them (a key side effect) + */ + if (dev->actconfig) { + /* + * FIXME: In order to avoid self-deadlock involving the + * bandwidth_mutex, we have to mark all the interfaces + * before unregistering any of them. + */ + for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) + dev->actconfig->interface[i]->unregistering = 1; + + for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) { + struct usb_interface *interface; + + /* remove this interface if it has been registered */ + interface = dev->actconfig->interface[i]; + if (!device_is_registered(&interface->dev)) + continue; + dev_dbg(&dev->dev, "unregistering interface %s\n", + dev_name(&interface->dev)); + remove_intf_ep_devs(interface); + device_del(&interface->dev); + } + + /* Now that the interfaces are unbound, nobody should + * try to access them. + */ + for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) { + put_device(&dev->actconfig->interface[i]->dev); + dev->actconfig->interface[i] = NULL; + } + + usb_disable_usb2_hardware_lpm(dev); + usb_unlocked_disable_lpm(dev); + usb_disable_ltm(dev); + + dev->actconfig = NULL; + if (dev->state == USB_STATE_CONFIGURED) + usb_set_device_state(dev, USB_STATE_ADDRESS); + } + + dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__, + skip_ep0 ? "non-ep0" : "all"); + + usb_disable_device_endpoints(dev, skip_ep0); +} + +/** + * usb_enable_endpoint - Enable an endpoint for USB communications + * @dev: the device whose interface is being enabled + * @ep: the endpoint + * @reset_ep: flag to reset the endpoint state + * + * Resets the endpoint state if asked, and sets dev->ep_{in,out} pointers. + * For control endpoints, both the input and output sides are handled. + */ +void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep, + bool reset_ep) +{ + int epnum = usb_endpoint_num(&ep->desc); + int is_out = usb_endpoint_dir_out(&ep->desc); + int is_control = usb_endpoint_xfer_control(&ep->desc); + + if (reset_ep) + usb_hcd_reset_endpoint(dev, ep); + if (is_out || is_control) + dev->ep_out[epnum] = ep; + if (!is_out || is_control) + dev->ep_in[epnum] = ep; + ep->enabled = 1; +} + +/** + * usb_enable_interface - Enable all the endpoints for an interface + * @dev: the device whose interface is being enabled + * @intf: pointer to the interface descriptor + * @reset_eps: flag to reset the endpoints' state + * + * Enables all the endpoints for the interface's current altsetting. + */ +void usb_enable_interface(struct usb_device *dev, + struct usb_interface *intf, bool reset_eps) +{ + struct usb_host_interface *alt = intf->cur_altsetting; + int i; + + for (i = 0; i < alt->desc.bNumEndpoints; ++i) + usb_enable_endpoint(dev, &alt->endpoint[i], reset_eps); +} + +/** + * usb_set_interface - Makes a particular alternate setting be current + * @dev: the device whose interface is being updated + * @interface: the interface being updated + * @alternate: the setting being chosen. + * + * Context: task context, might sleep. + * + * This is used to enable data transfers on interfaces that may not + * be enabled by default. Not all devices support such configurability. + * Only the driver bound to an interface may change its setting. + * + * Within any given configuration, each interface may have several + * alternative settings. These are often used to control levels of + * bandwidth consumption. For example, the default setting for a high + * speed interrupt endpoint may not send more than 64 bytes per microframe, + * while interrupt transfers of up to 3KBytes per microframe are legal. + * Also, isochronous endpoints may never be part of an + * interface's default setting. To access such bandwidth, alternate + * interface settings must be made current. + * + * Note that in the Linux USB subsystem, bandwidth associated with + * an endpoint in a given alternate setting is not reserved until an URB + * is submitted that needs that bandwidth. Some other operating systems + * allocate bandwidth early, when a configuration is chosen. + * + * xHCI reserves bandwidth and configures the alternate setting in + * usb_hcd_alloc_bandwidth(). If it fails the original interface altsetting + * may be disabled. Drivers cannot rely on any particular alternate + * setting being in effect after a failure. + * + * This call is synchronous, and may not be used in an interrupt context. + * Also, drivers must not change altsettings while urbs are scheduled for + * endpoints in that interface; all such urbs must first be completed + * (perhaps forced by unlinking). + * + * Return: Zero on success, or else the status code returned by the + * underlying usb_control_msg() call. + */ +int usb_set_interface(struct usb_device *dev, int interface, int alternate) +{ + struct usb_interface *iface; + struct usb_host_interface *alt; + struct usb_hcd *hcd = bus_to_hcd(dev->bus); + int i, ret, manual = 0; + unsigned int epaddr; + unsigned int pipe; + + if (dev->state == USB_STATE_SUSPENDED) + return -EHOSTUNREACH; + + iface = usb_ifnum_to_if(dev, interface); + if (!iface) { + dev_dbg(&dev->dev, "selecting invalid interface %d\n", + interface); + return -EINVAL; + } + if (iface->unregistering) + return -ENODEV; + + alt = usb_altnum_to_altsetting(iface, alternate); + if (!alt) { + dev_warn(&dev->dev, "selecting invalid altsetting %d\n", + alternate); + return -EINVAL; + } + /* + * usb3 hosts configure the interface in usb_hcd_alloc_bandwidth, + * including freeing dropped endpoint ring buffers. + * Make sure the interface endpoints are flushed before that + */ + usb_disable_interface(dev, iface, false); + + /* Make sure we have enough bandwidth for this alternate interface. + * Remove the current alt setting and add the new alt setting. + */ + mutex_lock(hcd->bandwidth_mutex); + /* Disable LPM, and re-enable it once the new alt setting is installed, + * so that the xHCI driver can recalculate the U1/U2 timeouts. + */ + if (usb_disable_lpm(dev)) { + dev_err(&iface->dev, "%s Failed to disable LPM\n", __func__); + mutex_unlock(hcd->bandwidth_mutex); + return -ENOMEM; + } + /* Changing alt-setting also frees any allocated streams */ + for (i = 0; i < iface->cur_altsetting->desc.bNumEndpoints; i++) + iface->cur_altsetting->endpoint[i].streams = 0; + + ret = usb_hcd_alloc_bandwidth(dev, NULL, iface->cur_altsetting, alt); + if (ret < 0) { + dev_info(&dev->dev, "Not enough bandwidth for altsetting %d\n", + alternate); + usb_enable_lpm(dev); + mutex_unlock(hcd->bandwidth_mutex); + return ret; + } + + if (dev->quirks & USB_QUIRK_NO_SET_INTF) + ret = -EPIPE; + else + ret = usb_control_msg_send(dev, 0, + USB_REQ_SET_INTERFACE, + USB_RECIP_INTERFACE, alternate, + interface, NULL, 0, 5000, + GFP_NOIO); + + /* 9.4.10 says devices don't need this and are free to STALL the + * request if the interface only has one alternate setting. + */ + if (ret == -EPIPE && iface->num_altsetting == 1) { + dev_dbg(&dev->dev, + "manual set_interface for iface %d, alt %d\n", + interface, alternate); + manual = 1; + } else if (ret) { + /* Re-instate the old alt setting */ + usb_hcd_alloc_bandwidth(dev, NULL, alt, iface->cur_altsetting); + usb_enable_lpm(dev); + mutex_unlock(hcd->bandwidth_mutex); + return ret; + } + mutex_unlock(hcd->bandwidth_mutex); + + /* FIXME drivers shouldn't need to replicate/bugfix the logic here + * when they implement async or easily-killable versions of this or + * other "should-be-internal" functions (like clear_halt). + * should hcd+usbcore postprocess control requests? + */ + + /* prevent submissions using previous endpoint settings */ + if (iface->cur_altsetting != alt) { + remove_intf_ep_devs(iface); + usb_remove_sysfs_intf_files(iface); + } + usb_disable_interface(dev, iface, true); + + iface->cur_altsetting = alt; + + /* Now that the interface is installed, re-enable LPM. */ + usb_unlocked_enable_lpm(dev); + + /* If the interface only has one altsetting and the device didn't + * accept the request, we attempt to carry out the equivalent action + * by manually clearing the HALT feature for each endpoint in the + * new altsetting. + */ + if (manual) { + for (i = 0; i < alt->desc.bNumEndpoints; i++) { + epaddr = alt->endpoint[i].desc.bEndpointAddress; + pipe = __create_pipe(dev, + USB_ENDPOINT_NUMBER_MASK & epaddr) | + (usb_endpoint_out(epaddr) ? + USB_DIR_OUT : USB_DIR_IN); + + usb_clear_halt(dev, pipe); + } + } + + /* 9.1.1.5: reset toggles for all endpoints in the new altsetting + * + * Note: + * Despite EP0 is always present in all interfaces/AS, the list of + * endpoints from the descriptor does not contain EP0. Due to its + * omnipresence one might expect EP0 being considered "affected" by + * any SetInterface request and hence assume toggles need to be reset. + * However, EP0 toggles are re-synced for every individual transfer + * during the SETUP stage - hence EP0 toggles are "don't care" here. + * (Likewise, EP0 never "halts" on well designed devices.) + */ + usb_enable_interface(dev, iface, true); + if (device_is_registered(&iface->dev)) { + usb_create_sysfs_intf_files(iface); + create_intf_ep_devs(iface); + } + return 0; +} +EXPORT_SYMBOL_GPL(usb_set_interface); + +/** + * usb_reset_configuration - lightweight device reset + * @dev: the device whose configuration is being reset + * + * This issues a standard SET_CONFIGURATION request to the device using + * the current configuration. The effect is to reset most USB-related + * state in the device, including interface altsettings (reset to zero), + * endpoint halts (cleared), and endpoint state (only for bulk and interrupt + * endpoints). Other usbcore state is unchanged, including bindings of + * usb device drivers to interfaces. + * + * Because this affects multiple interfaces, avoid using this with composite + * (multi-interface) devices. Instead, the driver for each interface may + * use usb_set_interface() on the interfaces it claims. Be careful though; + * some devices don't support the SET_INTERFACE request, and others won't + * reset all the interface state (notably endpoint state). Resetting the whole + * configuration would affect other drivers' interfaces. + * + * The caller must own the device lock. + * + * Return: Zero on success, else a negative error code. + * + * If this routine fails the device will probably be in an unusable state + * with endpoints disabled, and interfaces only partially enabled. + */ +int usb_reset_configuration(struct usb_device *dev) +{ + int i, retval; + struct usb_host_config *config; + struct usb_hcd *hcd = bus_to_hcd(dev->bus); + + if (dev->state == USB_STATE_SUSPENDED) + return -EHOSTUNREACH; + + /* caller must have locked the device and must own + * the usb bus readlock (so driver bindings are stable); + * calls during probe() are fine + */ + + usb_disable_device_endpoints(dev, 1); /* skip ep0*/ + + config = dev->actconfig; + retval = 0; + mutex_lock(hcd->bandwidth_mutex); + /* Disable LPM, and re-enable it once the configuration is reset, so + * that the xHCI driver can recalculate the U1/U2 timeouts. + */ + if (usb_disable_lpm(dev)) { + dev_err(&dev->dev, "%s Failed to disable LPM\n", __func__); + mutex_unlock(hcd->bandwidth_mutex); + return -ENOMEM; + } + + /* xHCI adds all endpoints in usb_hcd_alloc_bandwidth */ + retval = usb_hcd_alloc_bandwidth(dev, config, NULL, NULL); + if (retval < 0) { + usb_enable_lpm(dev); + mutex_unlock(hcd->bandwidth_mutex); + return retval; + } + retval = usb_control_msg_send(dev, 0, USB_REQ_SET_CONFIGURATION, 0, + config->desc.bConfigurationValue, 0, + NULL, 0, USB_CTRL_SET_TIMEOUT, + GFP_NOIO); + if (retval) { + usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL); + usb_enable_lpm(dev); + mutex_unlock(hcd->bandwidth_mutex); + return retval; + } + mutex_unlock(hcd->bandwidth_mutex); + + /* re-init hc/hcd interface/endpoint state */ + for (i = 0; i < config->desc.bNumInterfaces; i++) { + struct usb_interface *intf = config->interface[i]; + struct usb_host_interface *alt; + + alt = usb_altnum_to_altsetting(intf, 0); + + /* No altsetting 0? We'll assume the first altsetting. + * We could use a GetInterface call, but if a device is + * so non-compliant that it doesn't have altsetting 0 + * then I wouldn't trust its reply anyway. + */ + if (!alt) + alt = &intf->altsetting[0]; + + if (alt != intf->cur_altsetting) { + remove_intf_ep_devs(intf); + usb_remove_sysfs_intf_files(intf); + } + intf->cur_altsetting = alt; + usb_enable_interface(dev, intf, true); + if (device_is_registered(&intf->dev)) { + usb_create_sysfs_intf_files(intf); + create_intf_ep_devs(intf); + } + } + /* Now that the interfaces are installed, re-enable LPM. */ + usb_unlocked_enable_lpm(dev); + return 0; +} +EXPORT_SYMBOL_GPL(usb_reset_configuration); + +static void usb_release_interface(struct device *dev) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct usb_interface_cache *intfc = + altsetting_to_usb_interface_cache(intf->altsetting); + + kref_put(&intfc->ref, usb_release_interface_cache); + usb_put_dev(interface_to_usbdev(intf)); + of_node_put(dev->of_node); + kfree(intf); +} + +/* + * usb_deauthorize_interface - deauthorize an USB interface + * + * @intf: USB interface structure + */ +void usb_deauthorize_interface(struct usb_interface *intf) +{ + struct device *dev = &intf->dev; + + device_lock(dev->parent); + + if (intf->authorized) { + device_lock(dev); + intf->authorized = 0; + device_unlock(dev); + + usb_forced_unbind_intf(intf); + } + + device_unlock(dev->parent); +} + +/* + * usb_authorize_interface - authorize an USB interface + * + * @intf: USB interface structure + */ +void usb_authorize_interface(struct usb_interface *intf) +{ + struct device *dev = &intf->dev; + + if (!intf->authorized) { + device_lock(dev); + intf->authorized = 1; /* authorize interface */ + device_unlock(dev); + } +} + +static int usb_if_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + struct usb_device *usb_dev; + struct usb_interface *intf; + struct usb_host_interface *alt; + + intf = to_usb_interface(dev); + usb_dev = interface_to_usbdev(intf); + alt = intf->cur_altsetting; + + if (add_uevent_var(env, "INTERFACE=%d/%d/%d", + alt->desc.bInterfaceClass, + alt->desc.bInterfaceSubClass, + alt->desc.bInterfaceProtocol)) + return -ENOMEM; + + if (add_uevent_var(env, + "MODALIAS=usb:" + "v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02Xin%02X", + le16_to_cpu(usb_dev->descriptor.idVendor), + le16_to_cpu(usb_dev->descriptor.idProduct), + le16_to_cpu(usb_dev->descriptor.bcdDevice), + usb_dev->descriptor.bDeviceClass, + usb_dev->descriptor.bDeviceSubClass, + usb_dev->descriptor.bDeviceProtocol, + alt->desc.bInterfaceClass, + alt->desc.bInterfaceSubClass, + alt->desc.bInterfaceProtocol, + alt->desc.bInterfaceNumber)) + return -ENOMEM; + + return 0; +} + +struct device_type usb_if_device_type = { + .name = "usb_interface", + .release = usb_release_interface, + .uevent = usb_if_uevent, +}; + +static struct usb_interface_assoc_descriptor *find_iad(struct usb_device *dev, + struct usb_host_config *config, + u8 inum) +{ + struct usb_interface_assoc_descriptor *retval = NULL; + struct usb_interface_assoc_descriptor *intf_assoc; + int first_intf; + int last_intf; + int i; + + for (i = 0; (i < USB_MAXIADS && config->intf_assoc[i]); i++) { + intf_assoc = config->intf_assoc[i]; + if (intf_assoc->bInterfaceCount == 0) + continue; + + first_intf = intf_assoc->bFirstInterface; + last_intf = first_intf + (intf_assoc->bInterfaceCount - 1); + if (inum >= first_intf && inum <= last_intf) { + if (!retval) + retval = intf_assoc; + else + dev_err(&dev->dev, "Interface #%d referenced" + " by multiple IADs\n", inum); + } + } + + return retval; +} + + +/* + * Internal function to queue a device reset + * See usb_queue_reset_device() for more details + */ +static void __usb_queue_reset_device(struct work_struct *ws) +{ + int rc; + struct usb_interface *iface = + container_of(ws, struct usb_interface, reset_ws); + struct usb_device *udev = interface_to_usbdev(iface); + + rc = usb_lock_device_for_reset(udev, iface); + if (rc >= 0) { + usb_reset_device(udev); + usb_unlock_device(udev); + } + usb_put_intf(iface); /* Undo _get_ in usb_queue_reset_device() */ +} + + +/* + * usb_set_configuration - Makes a particular device setting be current + * @dev: the device whose configuration is being updated + * @configuration: the configuration being chosen. + * + * Context: task context, might sleep. Caller holds device lock. + * + * This is used to enable non-default device modes. Not all devices + * use this kind of configurability; many devices only have one + * configuration. + * + * @configuration is the value of the configuration to be installed. + * According to the USB spec (e.g. section 9.1.1.5), configuration values + * must be non-zero; a value of zero indicates that the device in + * unconfigured. However some devices erroneously use 0 as one of their + * configuration values. To help manage such devices, this routine will + * accept @configuration = -1 as indicating the device should be put in + * an unconfigured state. + * + * USB device configurations may affect Linux interoperability, + * power consumption and the functionality available. For example, + * the default configuration is limited to using 100mA of bus power, + * so that when certain device functionality requires more power, + * and the device is bus powered, that functionality should be in some + * non-default device configuration. Other device modes may also be + * reflected as configuration options, such as whether two ISDN + * channels are available independently; and choosing between open + * standard device protocols (like CDC) or proprietary ones. + * + * Note that a non-authorized device (dev->authorized == 0) will only + * be put in unconfigured mode. + * + * Note that USB has an additional level of device configurability, + * associated with interfaces. That configurability is accessed using + * usb_set_interface(). + * + * This call is synchronous. The calling context must be able to sleep, + * must own the device lock, and must not hold the driver model's USB + * bus mutex; usb interface driver probe() methods cannot use this routine. + * + * Returns zero on success, or else the status code returned by the + * underlying call that failed. On successful completion, each interface + * in the original device configuration has been destroyed, and each one + * in the new configuration has been probed by all relevant usb device + * drivers currently known to the kernel. + */ +int usb_set_configuration(struct usb_device *dev, int configuration) +{ + int i, ret; + struct usb_host_config *cp = NULL; + struct usb_interface **new_interfaces = NULL; + struct usb_hcd *hcd = bus_to_hcd(dev->bus); + int n, nintf; + + if (dev->authorized == 0 || configuration == -1) + configuration = 0; + else { + for (i = 0; i < dev->descriptor.bNumConfigurations; i++) { + if (dev->config[i].desc.bConfigurationValue == + configuration) { + cp = &dev->config[i]; + break; + } + } + } + if ((!cp && configuration != 0)) + return -EINVAL; + + /* The USB spec says configuration 0 means unconfigured. + * But if a device includes a configuration numbered 0, + * we will accept it as a correctly configured state. + * Use -1 if you really want to unconfigure the device. + */ + if (cp && configuration == 0) + dev_warn(&dev->dev, "config 0 descriptor??\n"); + + /* Allocate memory for new interfaces before doing anything else, + * so that if we run out then nothing will have changed. */ + n = nintf = 0; + if (cp) { + nintf = cp->desc.bNumInterfaces; + new_interfaces = kmalloc_array(nintf, sizeof(*new_interfaces), + GFP_NOIO); + if (!new_interfaces) + return -ENOMEM; + + for (; n < nintf; ++n) { + new_interfaces[n] = kzalloc( + sizeof(struct usb_interface), + GFP_NOIO); + if (!new_interfaces[n]) { + ret = -ENOMEM; +free_interfaces: + while (--n >= 0) + kfree(new_interfaces[n]); + kfree(new_interfaces); + return ret; + } + } + + i = dev->bus_mA - usb_get_max_power(dev, cp); + if (i < 0) + dev_warn(&dev->dev, "new config #%d exceeds power " + "limit by %dmA\n", + configuration, -i); + } + + /* Wake up the device so we can send it the Set-Config request */ + ret = usb_autoresume_device(dev); + if (ret) + goto free_interfaces; + + /* if it's already configured, clear out old state first. + * getting rid of old interfaces means unbinding their drivers. + */ + if (dev->state != USB_STATE_ADDRESS) + usb_disable_device(dev, 1); /* Skip ep0 */ + + /* Get rid of pending async Set-Config requests for this device */ + cancel_async_set_config(dev); + + /* Make sure we have bandwidth (and available HCD resources) for this + * configuration. Remove endpoints from the schedule if we're dropping + * this configuration to set configuration 0. After this point, the + * host controller will not allow submissions to dropped endpoints. If + * this call fails, the device state is unchanged. + */ + mutex_lock(hcd->bandwidth_mutex); + /* Disable LPM, and re-enable it once the new configuration is + * installed, so that the xHCI driver can recalculate the U1/U2 + * timeouts. + */ + if (dev->actconfig && usb_disable_lpm(dev)) { + dev_err(&dev->dev, "%s Failed to disable LPM\n", __func__); + mutex_unlock(hcd->bandwidth_mutex); + ret = -ENOMEM; + goto free_interfaces; + } + ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL); + if (ret < 0) { + if (dev->actconfig) + usb_enable_lpm(dev); + mutex_unlock(hcd->bandwidth_mutex); + usb_autosuspend_device(dev); + goto free_interfaces; + } + + /* + * Initialize the new interface structures and the + * hc/hcd/usbcore interface/endpoint state. + */ + for (i = 0; i < nintf; ++i) { + struct usb_interface_cache *intfc; + struct usb_interface *intf; + struct usb_host_interface *alt; + u8 ifnum; + + cp->interface[i] = intf = new_interfaces[i]; + intfc = cp->intf_cache[i]; + intf->altsetting = intfc->altsetting; + intf->num_altsetting = intfc->num_altsetting; + intf->authorized = !!HCD_INTF_AUTHORIZED(hcd); + kref_get(&intfc->ref); + + alt = usb_altnum_to_altsetting(intf, 0); + + /* No altsetting 0? We'll assume the first altsetting. + * We could use a GetInterface call, but if a device is + * so non-compliant that it doesn't have altsetting 0 + * then I wouldn't trust its reply anyway. + */ + if (!alt) + alt = &intf->altsetting[0]; + + ifnum = alt->desc.bInterfaceNumber; + intf->intf_assoc = find_iad(dev, cp, ifnum); + intf->cur_altsetting = alt; + usb_enable_interface(dev, intf, true); + intf->dev.parent = &dev->dev; + if (usb_of_has_combined_node(dev)) { + device_set_of_node_from_dev(&intf->dev, &dev->dev); + } else { + intf->dev.of_node = usb_of_get_interface_node(dev, + configuration, ifnum); + } + ACPI_COMPANION_SET(&intf->dev, ACPI_COMPANION(&dev->dev)); + intf->dev.driver = NULL; + intf->dev.bus = &usb_bus_type; + intf->dev.type = &usb_if_device_type; + intf->dev.groups = usb_interface_groups; + INIT_WORK(&intf->reset_ws, __usb_queue_reset_device); + intf->minor = -1; + device_initialize(&intf->dev); + pm_runtime_no_callbacks(&intf->dev); + dev_set_name(&intf->dev, "%d-%s:%d.%d", dev->bus->busnum, + dev->devpath, configuration, ifnum); + usb_get_dev(dev); + } + kfree(new_interfaces); + + ret = usb_control_msg_send(dev, 0, USB_REQ_SET_CONFIGURATION, 0, + configuration, 0, NULL, 0, + USB_CTRL_SET_TIMEOUT, GFP_NOIO); + if (ret && cp) { + /* + * All the old state is gone, so what else can we do? + * The device is probably useless now anyway. + */ + usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL); + for (i = 0; i < nintf; ++i) { + usb_disable_interface(dev, cp->interface[i], true); + put_device(&cp->interface[i]->dev); + cp->interface[i] = NULL; + } + cp = NULL; + } + + dev->actconfig = cp; + mutex_unlock(hcd->bandwidth_mutex); + + if (!cp) { + usb_set_device_state(dev, USB_STATE_ADDRESS); + + /* Leave LPM disabled while the device is unconfigured. */ + usb_autosuspend_device(dev); + return ret; + } + usb_set_device_state(dev, USB_STATE_CONFIGURED); + + if (cp->string == NULL && + !(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS)) + cp->string = usb_cache_string(dev, cp->desc.iConfiguration); + + /* Now that the interfaces are installed, re-enable LPM. */ + usb_unlocked_enable_lpm(dev); + /* Enable LTM if it was turned off by usb_disable_device. */ + usb_enable_ltm(dev); + + /* Now that all the interfaces are set up, register them + * to trigger binding of drivers to interfaces. probe() + * routines may install different altsettings and may + * claim() any interfaces not yet bound. Many class drivers + * need that: CDC, audio, video, etc. + */ + for (i = 0; i < nintf; ++i) { + struct usb_interface *intf = cp->interface[i]; + + if (intf->dev.of_node && + !of_device_is_available(intf->dev.of_node)) { + dev_info(&dev->dev, "skipping disabled interface %d\n", + intf->cur_altsetting->desc.bInterfaceNumber); + continue; + } + + dev_dbg(&dev->dev, + "adding %s (config #%d, interface %d)\n", + dev_name(&intf->dev), configuration, + intf->cur_altsetting->desc.bInterfaceNumber); + device_enable_async_suspend(&intf->dev); + ret = device_add(&intf->dev); + if (ret != 0) { + dev_err(&dev->dev, "device_add(%s) --> %d\n", + dev_name(&intf->dev), ret); + continue; + } + create_intf_ep_devs(intf); + } + + usb_autosuspend_device(dev); + return 0; +} +EXPORT_SYMBOL_GPL(usb_set_configuration); + +static LIST_HEAD(set_config_list); +static DEFINE_SPINLOCK(set_config_lock); + +struct set_config_request { + struct usb_device *udev; + int config; + struct work_struct work; + struct list_head node; +}; + +/* Worker routine for usb_driver_set_configuration() */ +static void driver_set_config_work(struct work_struct *work) +{ + struct set_config_request *req = + container_of(work, struct set_config_request, work); + struct usb_device *udev = req->udev; + + usb_lock_device(udev); + spin_lock(&set_config_lock); + list_del(&req->node); + spin_unlock(&set_config_lock); + + if (req->config >= -1) /* Is req still valid? */ + usb_set_configuration(udev, req->config); + usb_unlock_device(udev); + usb_put_dev(udev); + kfree(req); +} + +/* Cancel pending Set-Config requests for a device whose configuration + * was just changed + */ +static void cancel_async_set_config(struct usb_device *udev) +{ + struct set_config_request *req; + + spin_lock(&set_config_lock); + list_for_each_entry(req, &set_config_list, node) { + if (req->udev == udev) + req->config = -999; /* Mark as cancelled */ + } + spin_unlock(&set_config_lock); +} + +/** + * usb_driver_set_configuration - Provide a way for drivers to change device configurations + * @udev: the device whose configuration is being updated + * @config: the configuration being chosen. + * Context: In process context, must be able to sleep + * + * Device interface drivers are not allowed to change device configurations. + * This is because changing configurations will destroy the interface the + * driver is bound to and create new ones; it would be like a floppy-disk + * driver telling the computer to replace the floppy-disk drive with a + * tape drive! + * + * Still, in certain specialized circumstances the need may arise. This + * routine gets around the normal restrictions by using a work thread to + * submit the change-config request. + * + * Return: 0 if the request was successfully queued, error code otherwise. + * The caller has no way to know whether the queued request will eventually + * succeed. + */ +int usb_driver_set_configuration(struct usb_device *udev, int config) +{ + struct set_config_request *req; + + req = kmalloc(sizeof(*req), GFP_KERNEL); + if (!req) + return -ENOMEM; + req->udev = udev; + req->config = config; + INIT_WORK(&req->work, driver_set_config_work); + + spin_lock(&set_config_lock); + list_add(&req->node, &set_config_list); + spin_unlock(&set_config_lock); + + usb_get_dev(udev); + schedule_work(&req->work); + return 0; +} +EXPORT_SYMBOL_GPL(usb_driver_set_configuration); + +/** + * cdc_parse_cdc_header - parse the extra headers present in CDC devices + * @hdr: the place to put the results of the parsing + * @intf: the interface for which parsing is requested + * @buffer: pointer to the extra headers to be parsed + * @buflen: length of the extra headers + * + * This evaluates the extra headers present in CDC devices which + * bind the interfaces for data and control and provide details + * about the capabilities of the device. + * + * Return: number of descriptors parsed or -EINVAL + * if the header is contradictory beyond salvage + */ + +int cdc_parse_cdc_header(struct usb_cdc_parsed_header *hdr, + struct usb_interface *intf, + u8 *buffer, + int buflen) +{ + /* duplicates are ignored */ + struct usb_cdc_union_desc *union_header = NULL; + + /* duplicates are not tolerated */ + struct usb_cdc_header_desc *header = NULL; + struct usb_cdc_ether_desc *ether = NULL; + struct usb_cdc_mdlm_detail_desc *detail = NULL; + struct usb_cdc_mdlm_desc *desc = NULL; + + unsigned int elength; + int cnt = 0; + + memset(hdr, 0x00, sizeof(struct usb_cdc_parsed_header)); + hdr->phonet_magic_present = false; + while (buflen > 0) { + elength = buffer[0]; + if (!elength) { + dev_err(&intf->dev, "skipping garbage byte\n"); + elength = 1; + goto next_desc; + } + if ((buflen < elength) || (elength < 3)) { + dev_err(&intf->dev, "invalid descriptor buffer length\n"); + break; + } + if (buffer[1] != USB_DT_CS_INTERFACE) { + dev_err(&intf->dev, "skipping garbage\n"); + goto next_desc; + } + + switch (buffer[2]) { + case USB_CDC_UNION_TYPE: /* we've found it */ + if (elength < sizeof(struct usb_cdc_union_desc)) + goto next_desc; + if (union_header) { + dev_err(&intf->dev, "More than one union descriptor, skipping ...\n"); + goto next_desc; + } + union_header = (struct usb_cdc_union_desc *)buffer; + break; + case USB_CDC_COUNTRY_TYPE: + if (elength < sizeof(struct usb_cdc_country_functional_desc)) + goto next_desc; + hdr->usb_cdc_country_functional_desc = + (struct usb_cdc_country_functional_desc *)buffer; + break; + case USB_CDC_HEADER_TYPE: + if (elength != sizeof(struct usb_cdc_header_desc)) + goto next_desc; + if (header) + return -EINVAL; + header = (struct usb_cdc_header_desc *)buffer; + break; + case USB_CDC_ACM_TYPE: + if (elength < sizeof(struct usb_cdc_acm_descriptor)) + goto next_desc; + hdr->usb_cdc_acm_descriptor = + (struct usb_cdc_acm_descriptor *)buffer; + break; + case USB_CDC_ETHERNET_TYPE: + if (elength != sizeof(struct usb_cdc_ether_desc)) + goto next_desc; + if (ether) + return -EINVAL; + ether = (struct usb_cdc_ether_desc *)buffer; + break; + case USB_CDC_CALL_MANAGEMENT_TYPE: + if (elength < sizeof(struct usb_cdc_call_mgmt_descriptor)) + goto next_desc; + hdr->usb_cdc_call_mgmt_descriptor = + (struct usb_cdc_call_mgmt_descriptor *)buffer; + break; + case USB_CDC_DMM_TYPE: + if (elength < sizeof(struct usb_cdc_dmm_desc)) + goto next_desc; + hdr->usb_cdc_dmm_desc = + (struct usb_cdc_dmm_desc *)buffer; + break; + case USB_CDC_MDLM_TYPE: + if (elength < sizeof(struct usb_cdc_mdlm_desc)) + goto next_desc; + if (desc) + return -EINVAL; + desc = (struct usb_cdc_mdlm_desc *)buffer; + break; + case USB_CDC_MDLM_DETAIL_TYPE: + if (elength < sizeof(struct usb_cdc_mdlm_detail_desc)) + goto next_desc; + if (detail) + return -EINVAL; + detail = (struct usb_cdc_mdlm_detail_desc *)buffer; + break; + case USB_CDC_NCM_TYPE: + if (elength < sizeof(struct usb_cdc_ncm_desc)) + goto next_desc; + hdr->usb_cdc_ncm_desc = (struct usb_cdc_ncm_desc *)buffer; + break; + case USB_CDC_MBIM_TYPE: + if (elength < sizeof(struct usb_cdc_mbim_desc)) + goto next_desc; + + hdr->usb_cdc_mbim_desc = (struct usb_cdc_mbim_desc *)buffer; + break; + case USB_CDC_MBIM_EXTENDED_TYPE: + if (elength < sizeof(struct usb_cdc_mbim_extended_desc)) + break; + hdr->usb_cdc_mbim_extended_desc = + (struct usb_cdc_mbim_extended_desc *)buffer; + break; + case CDC_PHONET_MAGIC_NUMBER: + hdr->phonet_magic_present = true; + break; + default: + /* + * there are LOTS more CDC descriptors that + * could legitimately be found here. + */ + dev_dbg(&intf->dev, "Ignoring descriptor: type %02x, length %ud\n", + buffer[2], elength); + goto next_desc; + } + cnt++; +next_desc: + buflen -= elength; + buffer += elength; + } + hdr->usb_cdc_union_desc = union_header; + hdr->usb_cdc_header_desc = header; + hdr->usb_cdc_mdlm_detail_desc = detail; + hdr->usb_cdc_mdlm_desc = desc; + hdr->usb_cdc_ether_desc = ether; + return cnt; +} + +EXPORT_SYMBOL(cdc_parse_cdc_header); diff --git a/drivers/usb/core/notify.c b/drivers/usb/core/notify.c new file mode 100644 index 000000000..e61436637 --- /dev/null +++ b/drivers/usb/core/notify.c @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * All the USB notify logic + * + * (C) Copyright 2005 Greg Kroah-Hartman <gregkh@suse.de> + * + * notifier functions originally based on those in kernel/sys.c + * but fixed up to not be so broken. + * + * Released under the GPLv2 only. + */ + + +#include <linux/kernel.h> +#include <linux/export.h> +#include <linux/notifier.h> +#include <linux/usb.h> +#include <linux/mutex.h> +#include "usb.h" + +static BLOCKING_NOTIFIER_HEAD(usb_notifier_list); + +/** + * usb_register_notify - register a notifier callback whenever a usb change happens + * @nb: pointer to the notifier block for the callback events. + * + * These changes are either USB devices or busses being added or removed. + */ +void usb_register_notify(struct notifier_block *nb) +{ + blocking_notifier_chain_register(&usb_notifier_list, nb); +} +EXPORT_SYMBOL_GPL(usb_register_notify); + +/** + * usb_unregister_notify - unregister a notifier callback + * @nb: pointer to the notifier block for the callback events. + * + * usb_register_notify() must have been previously called for this function + * to work properly. + */ +void usb_unregister_notify(struct notifier_block *nb) +{ + blocking_notifier_chain_unregister(&usb_notifier_list, nb); +} +EXPORT_SYMBOL_GPL(usb_unregister_notify); + + +void usb_notify_add_device(struct usb_device *udev) +{ + blocking_notifier_call_chain(&usb_notifier_list, USB_DEVICE_ADD, udev); +} + +void usb_notify_remove_device(struct usb_device *udev) +{ + blocking_notifier_call_chain(&usb_notifier_list, + USB_DEVICE_REMOVE, udev); +} + +void usb_notify_add_bus(struct usb_bus *ubus) +{ + blocking_notifier_call_chain(&usb_notifier_list, USB_BUS_ADD, ubus); +} + +void usb_notify_remove_bus(struct usb_bus *ubus) +{ + blocking_notifier_call_chain(&usb_notifier_list, USB_BUS_REMOVE, ubus); +} diff --git a/drivers/usb/core/of.c b/drivers/usb/core/of.c new file mode 100644 index 000000000..617e92569 --- /dev/null +++ b/drivers/usb/core/of.c @@ -0,0 +1,107 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * of.c The helpers for hcd device tree support + * + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Author: Peter Chen <peter.chen@freescale.com> + * Copyright (C) 2017 Johan Hovold <johan@kernel.org> + */ + +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/usb/of.h> + +/** + * usb_of_get_device_node() - get a USB device node + * @hub: hub to which device is connected + * @port1: one-based index of port + * + * Look up the node of a USB device given its parent hub device and one-based + * port number. + * + * Return: A pointer to the node with incremented refcount if found, or + * %NULL otherwise. + */ +struct device_node *usb_of_get_device_node(struct usb_device *hub, int port1) +{ + struct device_node *node; + u32 reg; + + for_each_child_of_node(hub->dev.of_node, node) { + if (of_property_read_u32(node, "reg", ®)) + continue; + + if (reg == port1) + return node; + } + + return NULL; +} +EXPORT_SYMBOL_GPL(usb_of_get_device_node); + +/** + * usb_of_has_combined_node() - determine whether a device has a combined node + * @udev: USB device + * + * Determine whether a USB device has a so called combined node which is + * shared with its sole interface. This is the case if and only if the device + * has a node and its descriptors report the following: + * + * 1) bDeviceClass is 0 or 9, and + * 2) bNumConfigurations is 1, and + * 3) bNumInterfaces is 1. + * + * Return: True iff the device has a device node and its descriptors match the + * criteria for a combined node. + */ +bool usb_of_has_combined_node(struct usb_device *udev) +{ + struct usb_device_descriptor *ddesc = &udev->descriptor; + struct usb_config_descriptor *cdesc; + + if (!udev->dev.of_node) + return false; + + switch (ddesc->bDeviceClass) { + case USB_CLASS_PER_INTERFACE: + case USB_CLASS_HUB: + if (ddesc->bNumConfigurations == 1) { + cdesc = &udev->config->desc; + if (cdesc->bNumInterfaces == 1) + return true; + } + } + + return false; +} +EXPORT_SYMBOL_GPL(usb_of_has_combined_node); + +/** + * usb_of_get_interface_node() - get a USB interface node + * @udev: USB device of interface + * @config: configuration value + * @ifnum: interface number + * + * Look up the node of a USB interface given its USB device, configuration + * value and interface number. + * + * Return: A pointer to the node with incremented refcount if found, or + * %NULL otherwise. + */ +struct device_node * +usb_of_get_interface_node(struct usb_device *udev, u8 config, u8 ifnum) +{ + struct device_node *node; + u32 reg[2]; + + for_each_child_of_node(udev->dev.of_node, node) { + if (of_property_read_u32_array(node, "reg", reg, 2)) + continue; + + if (reg[0] == ifnum && reg[1] == config) + return node; + } + + return NULL; +} +EXPORT_SYMBOL_GPL(usb_of_get_interface_node); diff --git a/drivers/usb/core/otg_productlist.h b/drivers/usb/core/otg_productlist.h new file mode 100644 index 000000000..db67df29f --- /dev/null +++ b/drivers/usb/core/otg_productlist.h @@ -0,0 +1,102 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* Copyright (C) 2004 Texas Instruments */ + +/* + * This OTG and Embedded Host list is "Targeted Peripheral List". + * It should mostly use of USB_DEVICE() or USB_DEVICE_VER() entries.. + * + * YOU _SHOULD_ CHANGE THIS LIST TO MATCH YOUR PRODUCT AND ITS TESTING! + */ + +static struct usb_device_id productlist_table[] = { + +/* hubs are optional in OTG, but very handy ... */ +{ USB_DEVICE_INFO(USB_CLASS_HUB, 0, 0), }, +{ USB_DEVICE_INFO(USB_CLASS_HUB, 0, 1), }, + +#ifdef CONFIG_USB_PRINTER /* ignoring nonstatic linkage! */ +/* FIXME actually, printers are NOT supposed to use device classes; + * they're supposed to use interface classes... + */ +{ USB_DEVICE_INFO(7, 1, 1) }, +{ USB_DEVICE_INFO(7, 1, 2) }, +{ USB_DEVICE_INFO(7, 1, 3) }, +#endif + +#ifdef CONFIG_USB_NET_CDCETHER +/* Linux-USB CDC Ethernet gadget */ +{ USB_DEVICE(0x0525, 0xa4a1), }, +/* Linux-USB CDC Ethernet + RNDIS gadget */ +{ USB_DEVICE(0x0525, 0xa4a2), }, +#endif + +#if IS_ENABLED(CONFIG_USB_TEST) +/* gadget zero, for testing */ +{ USB_DEVICE(0x0525, 0xa4a0), }, +#endif + +{ } /* Terminating entry */ +}; + +static int is_targeted(struct usb_device *dev) +{ + struct usb_device_id *id = productlist_table; + + /* HNP test device is _never_ targeted (see OTG spec 6.6.6) */ + if ((le16_to_cpu(dev->descriptor.idVendor) == 0x1a0a && + le16_to_cpu(dev->descriptor.idProduct) == 0xbadd)) + return 0; + + /* OTG PET device is always targeted (see OTG 2.0 ECN 6.4.2) */ + if ((le16_to_cpu(dev->descriptor.idVendor) == 0x1a0a && + le16_to_cpu(dev->descriptor.idProduct) == 0x0200)) + return 1; + + /* NOTE: can't use usb_match_id() since interface caches + * aren't set up yet. this is cut/paste from that code. + */ + for (id = productlist_table; id->match_flags; id++) { + if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && + id->idVendor != le16_to_cpu(dev->descriptor.idVendor)) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) && + id->idProduct != le16_to_cpu(dev->descriptor.idProduct)) + continue; + + /* No need to test id->bcdDevice_lo != 0, since 0 is never + greater than any unsigned number. */ + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) && + (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice))) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) && + (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice))) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) && + (id->bDeviceClass != dev->descriptor.bDeviceClass)) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) && + (id->bDeviceSubClass != dev->descriptor.bDeviceSubClass)) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) && + (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol)) + continue; + + return 1; + } + + /* add other match criteria here ... */ + + + /* OTG MESSAGE: report errors here, customize to match your product */ + dev_err(&dev->dev, "device v%04x p%04x is not supported\n", + le16_to_cpu(dev->descriptor.idVendor), + le16_to_cpu(dev->descriptor.idProduct)); + + return 0; +} + diff --git a/drivers/usb/core/phy.c b/drivers/usb/core/phy.c new file mode 100644 index 000000000..fb1588e7c --- /dev/null +++ b/drivers/usb/core/phy.c @@ -0,0 +1,247 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * A wrapper for multiple PHYs which passes all phy_* function calls to + * multiple (actual) PHY devices. This is comes handy when initializing + * all PHYs on a HCD and to keep them all in the same state. + * + * Copyright (C) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com> + */ + +#include <linux/device.h> +#include <linux/list.h> +#include <linux/phy/phy.h> +#include <linux/of.h> + +#include "phy.h" + +struct usb_phy_roothub { + struct phy *phy; + struct list_head list; +}; + +static int usb_phy_roothub_add_phy(struct device *dev, int index, + struct list_head *list) +{ + struct usb_phy_roothub *roothub_entry; + struct phy *phy; + + phy = devm_of_phy_get_by_index(dev, dev->of_node, index); + if (IS_ERR(phy)) { + if (PTR_ERR(phy) == -ENODEV) + return 0; + else + return PTR_ERR(phy); + } + + roothub_entry = devm_kzalloc(dev, sizeof(*roothub_entry), GFP_KERNEL); + if (!roothub_entry) + return -ENOMEM; + + INIT_LIST_HEAD(&roothub_entry->list); + + roothub_entry->phy = phy; + + list_add_tail(&roothub_entry->list, list); + + return 0; +} + +struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev) +{ + struct usb_phy_roothub *phy_roothub; + int i, num_phys, err; + + if (!IS_ENABLED(CONFIG_GENERIC_PHY)) + return NULL; + + num_phys = of_count_phandle_with_args(dev->of_node, "phys", + "#phy-cells"); + if (num_phys <= 0) + return NULL; + + phy_roothub = devm_kzalloc(dev, sizeof(*phy_roothub), GFP_KERNEL); + if (!phy_roothub) + return ERR_PTR(-ENOMEM); + + INIT_LIST_HEAD(&phy_roothub->list); + + for (i = 0; i < num_phys; i++) { + err = usb_phy_roothub_add_phy(dev, i, &phy_roothub->list); + if (err) + return ERR_PTR(err); + } + + return phy_roothub; +} +EXPORT_SYMBOL_GPL(usb_phy_roothub_alloc); + +int usb_phy_roothub_init(struct usb_phy_roothub *phy_roothub) +{ + struct usb_phy_roothub *roothub_entry; + struct list_head *head; + int err; + + if (!phy_roothub) + return 0; + + head = &phy_roothub->list; + + list_for_each_entry(roothub_entry, head, list) { + err = phy_init(roothub_entry->phy); + if (err) + goto err_exit_phys; + } + + return 0; + +err_exit_phys: + list_for_each_entry_continue_reverse(roothub_entry, head, list) + phy_exit(roothub_entry->phy); + + return err; +} +EXPORT_SYMBOL_GPL(usb_phy_roothub_init); + +int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub) +{ + struct usb_phy_roothub *roothub_entry; + struct list_head *head; + int err, ret = 0; + + if (!phy_roothub) + return 0; + + head = &phy_roothub->list; + + list_for_each_entry(roothub_entry, head, list) { + err = phy_exit(roothub_entry->phy); + if (err) + ret = err; + } + + return ret; +} +EXPORT_SYMBOL_GPL(usb_phy_roothub_exit); + +int usb_phy_roothub_set_mode(struct usb_phy_roothub *phy_roothub, + enum phy_mode mode) +{ + struct usb_phy_roothub *roothub_entry; + struct list_head *head; + int err; + + if (!phy_roothub) + return 0; + + head = &phy_roothub->list; + + list_for_each_entry(roothub_entry, head, list) { + err = phy_set_mode(roothub_entry->phy, mode); + if (err) + goto err_out; + } + + return 0; + +err_out: + list_for_each_entry_continue_reverse(roothub_entry, head, list) + phy_power_off(roothub_entry->phy); + + return err; +} +EXPORT_SYMBOL_GPL(usb_phy_roothub_set_mode); + +int usb_phy_roothub_calibrate(struct usb_phy_roothub *phy_roothub) +{ + struct usb_phy_roothub *roothub_entry; + struct list_head *head; + int err; + + if (!phy_roothub) + return 0; + + head = &phy_roothub->list; + + list_for_each_entry(roothub_entry, head, list) { + err = phy_calibrate(roothub_entry->phy); + if (err) + return err; + } + + return 0; +} +EXPORT_SYMBOL_GPL(usb_phy_roothub_calibrate); + +int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub) +{ + struct usb_phy_roothub *roothub_entry; + struct list_head *head; + int err; + + if (!phy_roothub) + return 0; + + head = &phy_roothub->list; + + list_for_each_entry(roothub_entry, head, list) { + err = phy_power_on(roothub_entry->phy); + if (err) + goto err_out; + } + + return 0; + +err_out: + list_for_each_entry_continue_reverse(roothub_entry, head, list) + phy_power_off(roothub_entry->phy); + + return err; +} +EXPORT_SYMBOL_GPL(usb_phy_roothub_power_on); + +void usb_phy_roothub_power_off(struct usb_phy_roothub *phy_roothub) +{ + struct usb_phy_roothub *roothub_entry; + + if (!phy_roothub) + return; + + list_for_each_entry_reverse(roothub_entry, &phy_roothub->list, list) + phy_power_off(roothub_entry->phy); +} +EXPORT_SYMBOL_GPL(usb_phy_roothub_power_off); + +int usb_phy_roothub_suspend(struct device *controller_dev, + struct usb_phy_roothub *phy_roothub) +{ + usb_phy_roothub_power_off(phy_roothub); + + /* keep the PHYs initialized so the device can wake up the system */ + if (device_may_wakeup(controller_dev)) + return 0; + + return usb_phy_roothub_exit(phy_roothub); +} +EXPORT_SYMBOL_GPL(usb_phy_roothub_suspend); + +int usb_phy_roothub_resume(struct device *controller_dev, + struct usb_phy_roothub *phy_roothub) +{ + int err; + + /* if the device can't wake up the system _exit was called */ + if (!device_may_wakeup(controller_dev)) { + err = usb_phy_roothub_init(phy_roothub); + if (err) + return err; + } + + err = usb_phy_roothub_power_on(phy_roothub); + + /* undo _init if _power_on failed */ + if (err && !device_may_wakeup(controller_dev)) + usb_phy_roothub_exit(phy_roothub); + + return err; +} +EXPORT_SYMBOL_GPL(usb_phy_roothub_resume); diff --git a/drivers/usb/core/phy.h b/drivers/usb/core/phy.h new file mode 100644 index 000000000..20a267cd9 --- /dev/null +++ b/drivers/usb/core/phy.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * USB roothub wrapper + * + * Copyright (C) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com> + */ + +#ifndef __USB_CORE_PHY_H_ +#define __USB_CORE_PHY_H_ + +struct device; +struct usb_phy_roothub; + +struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev); + +int usb_phy_roothub_init(struct usb_phy_roothub *phy_roothub); +int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub); + +int usb_phy_roothub_set_mode(struct usb_phy_roothub *phy_roothub, + enum phy_mode mode); +int usb_phy_roothub_calibrate(struct usb_phy_roothub *phy_roothub); +int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub); +void usb_phy_roothub_power_off(struct usb_phy_roothub *phy_roothub); + +int usb_phy_roothub_suspend(struct device *controller_dev, + struct usb_phy_roothub *phy_roothub); +int usb_phy_roothub_resume(struct device *controller_dev, + struct usb_phy_roothub *phy_roothub); + +#endif /* __USB_CORE_PHY_H_ */ diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c new file mode 100644 index 000000000..38c1a4f4f --- /dev/null +++ b/drivers/usb/core/port.c @@ -0,0 +1,741 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * usb port device code + * + * Copyright (C) 2012 Intel Corp + * + * Author: Lan Tianyu <tianyu.lan@intel.com> + */ + +#include <linux/slab.h> +#include <linux/pm_qos.h> +#include <linux/component.h> + +#include "hub.h" + +static int usb_port_block_power_off; + +static const struct attribute_group *port_dev_group[]; + +static ssize_t disable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_port *port_dev = to_usb_port(dev); + struct usb_device *hdev = to_usb_device(dev->parent->parent); + struct usb_hub *hub = usb_hub_to_struct_hub(hdev); + struct usb_interface *intf = to_usb_interface(hub->intfdev); + int port1 = port_dev->portnum; + u16 portstatus, unused; + bool disabled; + int rc; + + rc = usb_autopm_get_interface(intf); + if (rc < 0) + return rc; + + usb_lock_device(hdev); + if (hub->disconnected) { + rc = -ENODEV; + goto out_hdev_lock; + } + + usb_hub_port_status(hub, port1, &portstatus, &unused); + disabled = !usb_port_is_power_on(hub, portstatus); + +out_hdev_lock: + usb_unlock_device(hdev); + usb_autopm_put_interface(intf); + + if (rc) + return rc; + + return sysfs_emit(buf, "%s\n", disabled ? "1" : "0"); +} + +static ssize_t disable_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_port *port_dev = to_usb_port(dev); + struct usb_device *hdev = to_usb_device(dev->parent->parent); + struct usb_hub *hub = usb_hub_to_struct_hub(hdev); + struct usb_interface *intf = to_usb_interface(hub->intfdev); + int port1 = port_dev->portnum; + bool disabled; + int rc; + + rc = strtobool(buf, &disabled); + if (rc) + return rc; + + rc = usb_autopm_get_interface(intf); + if (rc < 0) + return rc; + + usb_lock_device(hdev); + if (hub->disconnected) { + rc = -ENODEV; + goto out_hdev_lock; + } + + if (disabled && port_dev->child) + usb_disconnect(&port_dev->child); + + rc = usb_hub_set_port_power(hdev, hub, port1, !disabled); + + if (disabled) { + usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION); + if (!port_dev->is_superspeed) + usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_ENABLE); + } + + if (!rc) + rc = count; + +out_hdev_lock: + usb_unlock_device(hdev); + usb_autopm_put_interface(intf); + + return rc; +} +static DEVICE_ATTR_RW(disable); + +static ssize_t location_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_port *port_dev = to_usb_port(dev); + + return sprintf(buf, "0x%08x\n", port_dev->location); +} +static DEVICE_ATTR_RO(location); + +static ssize_t connect_type_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_port *port_dev = to_usb_port(dev); + char *result; + + switch (port_dev->connect_type) { + case USB_PORT_CONNECT_TYPE_HOT_PLUG: + result = "hotplug"; + break; + case USB_PORT_CONNECT_TYPE_HARD_WIRED: + result = "hardwired"; + break; + case USB_PORT_NOT_USED: + result = "not used"; + break; + default: + result = "unknown"; + break; + } + + return sprintf(buf, "%s\n", result); +} +static DEVICE_ATTR_RO(connect_type); + +static ssize_t over_current_count_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_port *port_dev = to_usb_port(dev); + + return sprintf(buf, "%u\n", port_dev->over_current_count); +} +static DEVICE_ATTR_RO(over_current_count); + +static ssize_t quirks_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_port *port_dev = to_usb_port(dev); + + return sprintf(buf, "%08x\n", port_dev->quirks); +} + +static ssize_t quirks_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_port *port_dev = to_usb_port(dev); + u32 value; + + if (kstrtou32(buf, 16, &value)) + return -EINVAL; + + port_dev->quirks = value; + return count; +} +static DEVICE_ATTR_RW(quirks); + +static ssize_t usb3_lpm_permit_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_port *port_dev = to_usb_port(dev); + const char *p; + + if (port_dev->usb3_lpm_u1_permit) { + if (port_dev->usb3_lpm_u2_permit) + p = "u1_u2"; + else + p = "u1"; + } else { + if (port_dev->usb3_lpm_u2_permit) + p = "u2"; + else + p = "0"; + } + + return sprintf(buf, "%s\n", p); +} + +static ssize_t usb3_lpm_permit_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_port *port_dev = to_usb_port(dev); + struct usb_device *udev = port_dev->child; + struct usb_hcd *hcd; + + if (!strncmp(buf, "u1_u2", 5)) { + port_dev->usb3_lpm_u1_permit = 1; + port_dev->usb3_lpm_u2_permit = 1; + + } else if (!strncmp(buf, "u1", 2)) { + port_dev->usb3_lpm_u1_permit = 1; + port_dev->usb3_lpm_u2_permit = 0; + + } else if (!strncmp(buf, "u2", 2)) { + port_dev->usb3_lpm_u1_permit = 0; + port_dev->usb3_lpm_u2_permit = 1; + + } else if (!strncmp(buf, "0", 1)) { + port_dev->usb3_lpm_u1_permit = 0; + port_dev->usb3_lpm_u2_permit = 0; + } else + return -EINVAL; + + /* If device is connected to the port, disable or enable lpm + * to make new u1 u2 setting take effect immediately. + */ + if (udev) { + hcd = bus_to_hcd(udev->bus); + if (!hcd) + return -EINVAL; + usb_lock_device(udev); + mutex_lock(hcd->bandwidth_mutex); + if (!usb_disable_lpm(udev)) + usb_enable_lpm(udev); + mutex_unlock(hcd->bandwidth_mutex); + usb_unlock_device(udev); + } + + return count; +} +static DEVICE_ATTR_RW(usb3_lpm_permit); + +static struct attribute *port_dev_attrs[] = { + &dev_attr_connect_type.attr, + &dev_attr_location.attr, + &dev_attr_quirks.attr, + &dev_attr_over_current_count.attr, + &dev_attr_disable.attr, + NULL, +}; + +static const struct attribute_group port_dev_attr_grp = { + .attrs = port_dev_attrs, +}; + +static const struct attribute_group *port_dev_group[] = { + &port_dev_attr_grp, + NULL, +}; + +static struct attribute *port_dev_usb3_attrs[] = { + &dev_attr_usb3_lpm_permit.attr, + NULL, +}; + +static const struct attribute_group port_dev_usb3_attr_grp = { + .attrs = port_dev_usb3_attrs, +}; + +static const struct attribute_group *port_dev_usb3_group[] = { + &port_dev_attr_grp, + &port_dev_usb3_attr_grp, + NULL, +}; + +static void usb_port_device_release(struct device *dev) +{ + struct usb_port *port_dev = to_usb_port(dev); + + kfree(port_dev->req); + kfree(port_dev); +} + +#ifdef CONFIG_PM +static int usb_port_runtime_resume(struct device *dev) +{ + struct usb_port *port_dev = to_usb_port(dev); + struct usb_device *hdev = to_usb_device(dev->parent->parent); + struct usb_interface *intf = to_usb_interface(dev->parent); + struct usb_hub *hub = usb_hub_to_struct_hub(hdev); + struct usb_device *udev = port_dev->child; + struct usb_port *peer = port_dev->peer; + int port1 = port_dev->portnum; + int retval; + + if (!hub) + return -EINVAL; + if (hub->in_reset) { + set_bit(port1, hub->power_bits); + return 0; + } + + /* + * Power on our usb3 peer before this usb2 port to prevent a usb3 + * device from degrading to its usb2 connection + */ + if (!port_dev->is_superspeed && peer) + pm_runtime_get_sync(&peer->dev); + + retval = usb_autopm_get_interface(intf); + if (retval < 0) + return retval; + + retval = usb_hub_set_port_power(hdev, hub, port1, true); + msleep(hub_power_on_good_delay(hub)); + if (udev && !retval) { + /* + * Our preference is to simply wait for the port to reconnect, + * as that is the lowest latency method to restart the port. + * However, there are cases where toggling port power results in + * the host port and the device port getting out of sync causing + * a link training live lock. Upon timeout, flag the port as + * needing warm reset recovery (to be performed later by + * usb_port_resume() as requested via usb_wakeup_notification()) + */ + if (hub_port_debounce_be_connected(hub, port1) < 0) { + dev_dbg(&port_dev->dev, "reconnect timeout\n"); + if (hub_is_superspeed(hdev)) + set_bit(port1, hub->warm_reset_bits); + } + + /* Force the child awake to revalidate after the power loss. */ + if (!test_and_set_bit(port1, hub->child_usage_bits)) { + pm_runtime_get_noresume(&port_dev->dev); + pm_request_resume(&udev->dev); + } + } + + usb_autopm_put_interface(intf); + + return retval; +} + +static int usb_port_runtime_suspend(struct device *dev) +{ + struct usb_port *port_dev = to_usb_port(dev); + struct usb_device *hdev = to_usb_device(dev->parent->parent); + struct usb_interface *intf = to_usb_interface(dev->parent); + struct usb_hub *hub = usb_hub_to_struct_hub(hdev); + struct usb_port *peer = port_dev->peer; + int port1 = port_dev->portnum; + int retval; + + if (!hub) + return -EINVAL; + if (hub->in_reset) + return -EBUSY; + + if (dev_pm_qos_flags(&port_dev->dev, PM_QOS_FLAG_NO_POWER_OFF) + == PM_QOS_FLAGS_ALL) + return -EAGAIN; + + if (usb_port_block_power_off) + return -EBUSY; + + retval = usb_autopm_get_interface(intf); + if (retval < 0) + return retval; + + retval = usb_hub_set_port_power(hdev, hub, port1, false); + usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION); + if (!port_dev->is_superspeed) + usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_ENABLE); + usb_autopm_put_interface(intf); + + /* + * Our peer usb3 port may now be able to suspend, so + * asynchronously queue a suspend request to observe that this + * usb2 port is now off. + */ + if (!port_dev->is_superspeed && peer) + pm_runtime_put(&peer->dev); + + return retval; +} +#endif + +static void usb_port_shutdown(struct device *dev) +{ + struct usb_port *port_dev = to_usb_port(dev); + + if (port_dev->child) + usb_disable_usb2_hardware_lpm(port_dev->child); +} + +static const struct dev_pm_ops usb_port_pm_ops = { +#ifdef CONFIG_PM + .runtime_suspend = usb_port_runtime_suspend, + .runtime_resume = usb_port_runtime_resume, +#endif +}; + +struct device_type usb_port_device_type = { + .name = "usb_port", + .release = usb_port_device_release, + .pm = &usb_port_pm_ops, +}; + +static struct device_driver usb_port_driver = { + .name = "usb", + .owner = THIS_MODULE, + .shutdown = usb_port_shutdown, +}; + +static int link_peers(struct usb_port *left, struct usb_port *right) +{ + struct usb_port *ss_port, *hs_port; + int rc; + + if (left->peer == right && right->peer == left) + return 0; + + if (left->peer || right->peer) { + struct usb_port *lpeer = left->peer; + struct usb_port *rpeer = right->peer; + char *method; + + if (left->location && left->location == right->location) + method = "location"; + else + method = "default"; + + pr_debug("usb: failed to peer %s and %s by %s (%s:%s) (%s:%s)\n", + dev_name(&left->dev), dev_name(&right->dev), method, + dev_name(&left->dev), + lpeer ? dev_name(&lpeer->dev) : "none", + dev_name(&right->dev), + rpeer ? dev_name(&rpeer->dev) : "none"); + return -EBUSY; + } + + rc = sysfs_create_link(&left->dev.kobj, &right->dev.kobj, "peer"); + if (rc) + return rc; + rc = sysfs_create_link(&right->dev.kobj, &left->dev.kobj, "peer"); + if (rc) { + sysfs_remove_link(&left->dev.kobj, "peer"); + return rc; + } + + /* + * We need to wake the HiSpeed port to make sure we don't race + * setting ->peer with usb_port_runtime_suspend(). Otherwise we + * may miss a suspend event for the SuperSpeed port. + */ + if (left->is_superspeed) { + ss_port = left; + WARN_ON(right->is_superspeed); + hs_port = right; + } else { + ss_port = right; + WARN_ON(!right->is_superspeed); + hs_port = left; + } + pm_runtime_get_sync(&hs_port->dev); + + left->peer = right; + right->peer = left; + + /* + * The SuperSpeed reference is dropped when the HiSpeed port in + * this relationship suspends, i.e. when it is safe to allow a + * SuperSpeed connection to drop since there is no risk of a + * device degrading to its powered-off HiSpeed connection. + * + * Also, drop the HiSpeed ref taken above. + */ + pm_runtime_get_sync(&ss_port->dev); + pm_runtime_put(&hs_port->dev); + + return 0; +} + +static void link_peers_report(struct usb_port *left, struct usb_port *right) +{ + int rc; + + rc = link_peers(left, right); + if (rc == 0) { + dev_dbg(&left->dev, "peered to %s\n", dev_name(&right->dev)); + } else { + dev_dbg(&left->dev, "failed to peer to %s (%d)\n", + dev_name(&right->dev), rc); + pr_warn_once("usb: port power management may be unreliable\n"); + usb_port_block_power_off = 1; + } +} + +static void unlink_peers(struct usb_port *left, struct usb_port *right) +{ + struct usb_port *ss_port, *hs_port; + + WARN(right->peer != left || left->peer != right, + "%s and %s are not peers?\n", + dev_name(&left->dev), dev_name(&right->dev)); + + /* + * We wake the HiSpeed port to make sure we don't race its + * usb_port_runtime_resume() event which takes a SuperSpeed ref + * when ->peer is !NULL. + */ + if (left->is_superspeed) { + ss_port = left; + hs_port = right; + } else { + ss_port = right; + hs_port = left; + } + + pm_runtime_get_sync(&hs_port->dev); + + sysfs_remove_link(&left->dev.kobj, "peer"); + right->peer = NULL; + sysfs_remove_link(&right->dev.kobj, "peer"); + left->peer = NULL; + + /* Drop the SuperSpeed ref held on behalf of the active HiSpeed port */ + pm_runtime_put(&ss_port->dev); + + /* Drop the ref taken above */ + pm_runtime_put(&hs_port->dev); +} + +/* + * For each usb hub device in the system check to see if it is in the + * peer domain of the given port_dev, and if it is check to see if it + * has a port that matches the given port by location + */ +static int match_location(struct usb_device *peer_hdev, void *p) +{ + int port1; + struct usb_hcd *hcd, *peer_hcd; + struct usb_port *port_dev = p, *peer; + struct usb_hub *peer_hub = usb_hub_to_struct_hub(peer_hdev); + struct usb_device *hdev = to_usb_device(port_dev->dev.parent->parent); + + if (!peer_hub) + return 0; + + hcd = bus_to_hcd(hdev->bus); + peer_hcd = bus_to_hcd(peer_hdev->bus); + /* peer_hcd is provisional until we verify it against the known peer */ + if (peer_hcd != hcd->shared_hcd) + return 0; + + for (port1 = 1; port1 <= peer_hdev->maxchild; port1++) { + peer = peer_hub->ports[port1 - 1]; + if (peer && peer->location == port_dev->location) { + link_peers_report(port_dev, peer); + return 1; /* done */ + } + } + + return 0; +} + +/* + * Find the peer port either via explicit platform firmware "location" + * data, the peer hcd for root hubs, or the upstream peer relationship + * for all other hubs. + */ +static void find_and_link_peer(struct usb_hub *hub, int port1) +{ + struct usb_port *port_dev = hub->ports[port1 - 1], *peer; + struct usb_device *hdev = hub->hdev; + struct usb_device *peer_hdev; + struct usb_hub *peer_hub; + + /* + * If location data is available then we can only peer this port + * by a location match, not the default peer (lest we create a + * situation where we need to go back and undo a default peering + * when the port is later peered by location data) + */ + if (port_dev->location) { + /* we link the peer in match_location() if found */ + usb_for_each_dev(port_dev, match_location); + return; + } else if (!hdev->parent) { + struct usb_hcd *hcd = bus_to_hcd(hdev->bus); + struct usb_hcd *peer_hcd = hcd->shared_hcd; + + if (!peer_hcd) + return; + + peer_hdev = peer_hcd->self.root_hub; + } else { + struct usb_port *upstream; + struct usb_device *parent = hdev->parent; + struct usb_hub *parent_hub = usb_hub_to_struct_hub(parent); + + if (!parent_hub) + return; + + upstream = parent_hub->ports[hdev->portnum - 1]; + if (!upstream || !upstream->peer) + return; + + peer_hdev = upstream->peer->child; + } + + peer_hub = usb_hub_to_struct_hub(peer_hdev); + if (!peer_hub || port1 > peer_hdev->maxchild) + return; + + /* + * we found a valid default peer, last check is to make sure it + * does not have location data + */ + peer = peer_hub->ports[port1 - 1]; + if (peer && peer->location == 0) + link_peers_report(port_dev, peer); +} + +static int connector_bind(struct device *dev, struct device *connector, void *data) +{ + int ret; + + ret = sysfs_create_link(&dev->kobj, &connector->kobj, "connector"); + if (ret) + return ret; + + ret = sysfs_create_link(&connector->kobj, &dev->kobj, dev_name(dev)); + if (ret) + sysfs_remove_link(&dev->kobj, "connector"); + + return ret; +} + +static void connector_unbind(struct device *dev, struct device *connector, void *data) +{ + sysfs_remove_link(&connector->kobj, dev_name(dev)); + sysfs_remove_link(&dev->kobj, "connector"); +} + +static const struct component_ops connector_ops = { + .bind = connector_bind, + .unbind = connector_unbind, +}; + +int usb_hub_create_port_device(struct usb_hub *hub, int port1) +{ + struct usb_port *port_dev; + struct usb_device *hdev = hub->hdev; + int retval; + + port_dev = kzalloc(sizeof(*port_dev), GFP_KERNEL); + if (!port_dev) + return -ENOMEM; + + port_dev->req = kzalloc(sizeof(*(port_dev->req)), GFP_KERNEL); + if (!port_dev->req) { + kfree(port_dev); + return -ENOMEM; + } + + hub->ports[port1 - 1] = port_dev; + port_dev->portnum = port1; + set_bit(port1, hub->power_bits); + port_dev->dev.parent = hub->intfdev; + if (hub_is_superspeed(hdev)) { + port_dev->usb3_lpm_u1_permit = 1; + port_dev->usb3_lpm_u2_permit = 1; + port_dev->dev.groups = port_dev_usb3_group; + } else + port_dev->dev.groups = port_dev_group; + port_dev->dev.type = &usb_port_device_type; + port_dev->dev.driver = &usb_port_driver; + if (hub_is_superspeed(hub->hdev)) + port_dev->is_superspeed = 1; + dev_set_name(&port_dev->dev, "%s-port%d", dev_name(&hub->hdev->dev), + port1); + mutex_init(&port_dev->status_lock); + retval = device_register(&port_dev->dev); + if (retval) { + put_device(&port_dev->dev); + return retval; + } + + /* Set default policy of port-poweroff disabled. */ + retval = dev_pm_qos_add_request(&port_dev->dev, port_dev->req, + DEV_PM_QOS_FLAGS, PM_QOS_FLAG_NO_POWER_OFF); + if (retval < 0) { + device_unregister(&port_dev->dev); + return retval; + } + + retval = component_add(&port_dev->dev, &connector_ops); + if (retval) { + dev_warn(&port_dev->dev, "failed to add component\n"); + device_unregister(&port_dev->dev); + return retval; + } + + find_and_link_peer(hub, port1); + + /* + * Enable runtime pm and hold a refernce that hub_configure() + * will drop once the PM_QOS_NO_POWER_OFF flag state has been set + * and the hub has been fully registered (hdev->maxchild set). + */ + pm_runtime_set_active(&port_dev->dev); + pm_runtime_get_noresume(&port_dev->dev); + pm_runtime_enable(&port_dev->dev); + device_enable_async_suspend(&port_dev->dev); + + /* + * Keep hidden the ability to enable port-poweroff if the hub + * does not support power switching. + */ + if (!hub_is_port_power_switchable(hub)) + return 0; + + /* Attempt to let userspace take over the policy. */ + retval = dev_pm_qos_expose_flags(&port_dev->dev, + PM_QOS_FLAG_NO_POWER_OFF); + if (retval < 0) { + dev_warn(&port_dev->dev, "failed to expose pm_qos_no_poweroff\n"); + return 0; + } + + /* Userspace owns the policy, drop the kernel 'no_poweroff' request. */ + retval = dev_pm_qos_remove_request(port_dev->req); + if (retval >= 0) { + kfree(port_dev->req); + port_dev->req = NULL; + } + return 0; +} + +void usb_hub_remove_port_device(struct usb_hub *hub, int port1) +{ + struct usb_port *port_dev = hub->ports[port1 - 1]; + struct usb_port *peer; + + peer = port_dev->peer; + if (peer) + unlink_peers(port_dev, peer); + component_del(&port_dev->dev, &connector_ops); + device_unregister(&port_dev->dev); +} diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c new file mode 100644 index 000000000..15e9bd180 --- /dev/null +++ b/drivers/usb/core/quirks.c @@ -0,0 +1,735 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * USB device quirk handling logic and table + * + * Copyright (c) 2007 Oliver Neukum + * Copyright (c) 2007 Greg Kroah-Hartman <gregkh@suse.de> + */ + +#include <linux/moduleparam.h> +#include <linux/usb.h> +#include <linux/usb/quirks.h> +#include <linux/usb/hcd.h> +#include "usb.h" + +struct quirk_entry { + u16 vid; + u16 pid; + u32 flags; +}; + +static DEFINE_MUTEX(quirk_mutex); + +static struct quirk_entry *quirk_list; +static unsigned int quirk_count; + +static char quirks_param[128]; + +static int quirks_param_set(const char *value, const struct kernel_param *kp) +{ + char *val, *p, *field; + u16 vid, pid; + u32 flags; + size_t i; + int err; + + val = kstrdup(value, GFP_KERNEL); + if (!val) + return -ENOMEM; + + err = param_set_copystring(val, kp); + if (err) { + kfree(val); + return err; + } + + mutex_lock(&quirk_mutex); + + if (!*val) { + quirk_count = 0; + kfree(quirk_list); + quirk_list = NULL; + goto unlock; + } + + for (quirk_count = 1, i = 0; val[i]; i++) + if (val[i] == ',') + quirk_count++; + + if (quirk_list) { + kfree(quirk_list); + quirk_list = NULL; + } + + quirk_list = kcalloc(quirk_count, sizeof(struct quirk_entry), + GFP_KERNEL); + if (!quirk_list) { + quirk_count = 0; + mutex_unlock(&quirk_mutex); + kfree(val); + return -ENOMEM; + } + + for (i = 0, p = val; p && *p;) { + /* Each entry consists of VID:PID:flags */ + field = strsep(&p, ":"); + if (!field) + break; + + if (kstrtou16(field, 16, &vid)) + break; + + field = strsep(&p, ":"); + if (!field) + break; + + if (kstrtou16(field, 16, &pid)) + break; + + field = strsep(&p, ","); + if (!field || !*field) + break; + + /* Collect the flags */ + for (flags = 0; *field; field++) { + switch (*field) { + case 'a': + flags |= USB_QUIRK_STRING_FETCH_255; + break; + case 'b': + flags |= USB_QUIRK_RESET_RESUME; + break; + case 'c': + flags |= USB_QUIRK_NO_SET_INTF; + break; + case 'd': + flags |= USB_QUIRK_CONFIG_INTF_STRINGS; + break; + case 'e': + flags |= USB_QUIRK_RESET; + break; + case 'f': + flags |= USB_QUIRK_HONOR_BNUMINTERFACES; + break; + case 'g': + flags |= USB_QUIRK_DELAY_INIT; + break; + case 'h': + flags |= USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL; + break; + case 'i': + flags |= USB_QUIRK_DEVICE_QUALIFIER; + break; + case 'j': + flags |= USB_QUIRK_IGNORE_REMOTE_WAKEUP; + break; + case 'k': + flags |= USB_QUIRK_NO_LPM; + break; + case 'l': + flags |= USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL; + break; + case 'm': + flags |= USB_QUIRK_DISCONNECT_SUSPEND; + break; + case 'n': + flags |= USB_QUIRK_DELAY_CTRL_MSG; + break; + case 'o': + flags |= USB_QUIRK_HUB_SLOW_RESET; + break; + /* Ignore unrecognized flag characters */ + } + } + + quirk_list[i++] = (struct quirk_entry) + { .vid = vid, .pid = pid, .flags = flags }; + } + + if (i < quirk_count) + quirk_count = i; + +unlock: + mutex_unlock(&quirk_mutex); + kfree(val); + + return 0; +} + +static const struct kernel_param_ops quirks_param_ops = { + .set = quirks_param_set, + .get = param_get_string, +}; + +static struct kparam_string quirks_param_string = { + .maxlen = sizeof(quirks_param), + .string = quirks_param, +}; + +device_param_cb(quirks, &quirks_param_ops, &quirks_param_string, 0644); +MODULE_PARM_DESC(quirks, "Add/modify USB quirks by specifying quirks=vendorID:productID:quirks"); + +/* Lists of quirky USB devices, split in device quirks and interface quirks. + * Device quirks are applied at the very beginning of the enumeration process, + * right after reading the device descriptor. They can thus only match on device + * information. + * + * Interface quirks are applied after reading all the configuration descriptors. + * They can match on both device and interface information. + * + * Note that the DELAY_INIT and HONOR_BNUMINTERFACES quirks do not make sense as + * interface quirks, as they only influence the enumeration process which is run + * before processing the interface quirks. + * + * Please keep the lists ordered by: + * 1) Vendor ID + * 2) Product ID + * 3) Class ID + */ +static const struct usb_device_id usb_quirk_list[] = { + /* CBM - Flash disk */ + { USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* WORLDE Controller KS49 or Prodipe MIDI 49C USB controller */ + { USB_DEVICE(0x0218, 0x0201), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + + /* WORLDE easy key (easykey.25) MIDI controller */ + { USB_DEVICE(0x0218, 0x0401), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + + /* HP 5300/5370C scanner */ + { USB_DEVICE(0x03f0, 0x0701), .driver_info = + USB_QUIRK_STRING_FETCH_255 }, + + /* HP v222w 16GB Mini USB Drive */ + { USB_DEVICE(0x03f0, 0x3f40), .driver_info = USB_QUIRK_DELAY_INIT }, + + /* Creative SB Audigy 2 NX */ + { USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* USB3503 */ + { USB_DEVICE(0x0424, 0x3503), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Microsoft Wireless Laser Mouse 6000 Receiver */ + { USB_DEVICE(0x045e, 0x00e1), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Microsoft LifeCam-VX700 v2.0 */ + { USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Microsoft Surface Dock Ethernet (RTL8153 GigE) */ + { USB_DEVICE(0x045e, 0x07c6), .driver_info = USB_QUIRK_NO_LPM }, + + /* Cherry Stream G230 2.0 (G85-231) and 3.0 (G85-232) */ + { USB_DEVICE(0x046a, 0x0023), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech HD Webcam C270 */ + { USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech HD Pro Webcams C920, C920-C, C922, C925e and C930e */ + { USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT }, + { USB_DEVICE(0x046d, 0x0841), .driver_info = USB_QUIRK_DELAY_INIT }, + { USB_DEVICE(0x046d, 0x0843), .driver_info = USB_QUIRK_DELAY_INIT }, + { USB_DEVICE(0x046d, 0x085b), .driver_info = USB_QUIRK_DELAY_INIT }, + { USB_DEVICE(0x046d, 0x085c), .driver_info = USB_QUIRK_DELAY_INIT }, + + /* Logitech ConferenceCam CC3000e */ + { USB_DEVICE(0x046d, 0x0847), .driver_info = USB_QUIRK_DELAY_INIT }, + { USB_DEVICE(0x046d, 0x0848), .driver_info = USB_QUIRK_DELAY_INIT }, + + /* Logitech PTZ Pro Camera */ + { USB_DEVICE(0x046d, 0x0853), .driver_info = USB_QUIRK_DELAY_INIT }, + + /* Logitech Screen Share */ + { USB_DEVICE(0x046d, 0x086c), .driver_info = USB_QUIRK_NO_LPM }, + + /* Logitech Quickcam Fusion */ + { USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Quickcam Orbit MP */ + { USB_DEVICE(0x046d, 0x08c2), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Quickcam Pro for Notebook */ + { USB_DEVICE(0x046d, 0x08c3), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Quickcam Pro 5000 */ + { USB_DEVICE(0x046d, 0x08c5), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Quickcam OEM Dell Notebook */ + { USB_DEVICE(0x046d, 0x08c6), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Quickcam OEM Cisco VT Camera II */ + { USB_DEVICE(0x046d, 0x08c7), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Harmony 700-series */ + { USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT }, + + /* Philips PSC805 audio device */ + { USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Plantronic Audio 655 DSP */ + { USB_DEVICE(0x047f, 0xc008), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Plantronic Audio 648 USB */ + { USB_DEVICE(0x047f, 0xc013), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Artisman Watchdog Dongle */ + { USB_DEVICE(0x04b4, 0x0526), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + + /* Microchip Joss Optical infrared touchboard device */ + { USB_DEVICE(0x04d8, 0x000c), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + + /* CarrolTouch 4000U */ + { USB_DEVICE(0x04e7, 0x0009), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* CarrolTouch 4500U */ + { USB_DEVICE(0x04e7, 0x0030), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Samsung Android phone modem - ID conflict with SPH-I500 */ + { USB_DEVICE(0x04e8, 0x6601), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + + /* Elan Touchscreen */ + { USB_DEVICE(0x04f3, 0x0089), .driver_info = + USB_QUIRK_DEVICE_QUALIFIER }, + + { USB_DEVICE(0x04f3, 0x009b), .driver_info = + USB_QUIRK_DEVICE_QUALIFIER }, + + { USB_DEVICE(0x04f3, 0x010c), .driver_info = + USB_QUIRK_DEVICE_QUALIFIER }, + + { USB_DEVICE(0x04f3, 0x0125), .driver_info = + USB_QUIRK_DEVICE_QUALIFIER }, + + { USB_DEVICE(0x04f3, 0x016f), .driver_info = + USB_QUIRK_DEVICE_QUALIFIER }, + + { USB_DEVICE(0x04f3, 0x0381), .driver_info = + USB_QUIRK_NO_LPM }, + + { USB_DEVICE(0x04f3, 0x21b8), .driver_info = + USB_QUIRK_DEVICE_QUALIFIER }, + + /* Roland SC-8820 */ + { USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Edirol SD-20 */ + { USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Alcor Micro Corp. Hub */ + { USB_DEVICE(0x058f, 0x9254), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* appletouch */ + { USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Genesys Logic hub, internally used by KY-688 USB 3.1 Type-C Hub */ + { USB_DEVICE(0x05e3, 0x0612), .driver_info = USB_QUIRK_NO_LPM }, + + /* ELSA MicroLink 56K */ + { USB_DEVICE(0x05cc, 0x2267), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Genesys Logic hub, internally used by Moshi USB to Ethernet Adapter */ + { USB_DEVICE(0x05e3, 0x0616), .driver_info = USB_QUIRK_NO_LPM }, + + /* Avision AV600U */ + { USB_DEVICE(0x0638, 0x0a13), .driver_info = + USB_QUIRK_STRING_FETCH_255 }, + + /* Saitek Cyborg Gold Joystick */ + { USB_DEVICE(0x06a3, 0x0006), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + + /* Agfa SNAPSCAN 1212U */ + { USB_DEVICE(0x06bd, 0x0001), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Guillemot Webcam Hercules Dualpix Exchange (2nd ID) */ + { USB_DEVICE(0x06f8, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Guillemot Webcam Hercules Dualpix Exchange*/ + { USB_DEVICE(0x06f8, 0x3005), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Guillemot Hercules DJ Console audio card (BZ 208357) */ + { USB_DEVICE(0x06f8, 0xb000), .driver_info = + USB_QUIRK_ENDPOINT_IGNORE }, + + /* Midiman M-Audio Keystation 88es */ + { USB_DEVICE(0x0763, 0x0192), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* SanDisk Ultra Fit and Ultra Flair */ + { USB_DEVICE(0x0781, 0x5583), .driver_info = USB_QUIRK_NO_LPM }, + { USB_DEVICE(0x0781, 0x5591), .driver_info = USB_QUIRK_NO_LPM }, + + /* Realforce 87U Keyboard */ + { USB_DEVICE(0x0853, 0x011b), .driver_info = USB_QUIRK_NO_LPM }, + + /* M-Systems Flash Disk Pioneers */ + { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Baum Vario Ultra */ + { USB_DEVICE(0x0904, 0x6101), .driver_info = + USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL }, + { USB_DEVICE(0x0904, 0x6102), .driver_info = + USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL }, + { USB_DEVICE(0x0904, 0x6103), .driver_info = + USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL }, + + /* Sound Devices USBPre2 */ + { USB_DEVICE(0x0926, 0x0202), .driver_info = + USB_QUIRK_ENDPOINT_IGNORE }, + + /* Sound Devices MixPre-D */ + { USB_DEVICE(0x0926, 0x0208), .driver_info = + USB_QUIRK_ENDPOINT_IGNORE }, + + /* Keytouch QWERTY Panel keyboard */ + { USB_DEVICE(0x0926, 0x3333), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + + /* Kingston DataTraveler 3.0 */ + { USB_DEVICE(0x0951, 0x1666), .driver_info = USB_QUIRK_NO_LPM }, + + /* NVIDIA Jetson devices in Force Recovery mode */ + { USB_DEVICE(0x0955, 0x7018), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7019), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7418), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7721), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7c18), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7e19), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7f21), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */ + { USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF }, + + /* ELMO L-12F document camera */ + { USB_DEVICE(0x09a1, 0x0028), .driver_info = USB_QUIRK_DELAY_CTRL_MSG }, + + /* Broadcom BCM92035DGROM BT dongle */ + { USB_DEVICE(0x0a5c, 0x2021), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* MAYA44USB sound device */ + { USB_DEVICE(0x0a92, 0x0091), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* ASUS Base Station(T100) */ + { USB_DEVICE(0x0b05, 0x17e0), .driver_info = + USB_QUIRK_IGNORE_REMOTE_WAKEUP }, + + /* Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader)*/ + { USB_DEVICE(0x0bda, 0x0151), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, + + /* Realtek hub in Dell WD19 (Type-C) */ + { USB_DEVICE(0x0bda, 0x0487), .driver_info = USB_QUIRK_NO_LPM }, + + /* Generic RTL8153 based ethernet adapters */ + { USB_DEVICE(0x0bda, 0x8153), .driver_info = USB_QUIRK_NO_LPM }, + + /* SONiX USB DEVICE Touchpad */ + { USB_DEVICE(0x0c45, 0x7056), .driver_info = + USB_QUIRK_IGNORE_REMOTE_WAKEUP }, + + /* Action Semiconductor flash disk */ + { USB_DEVICE(0x10d6, 0x2200), .driver_info = + USB_QUIRK_STRING_FETCH_255 }, + + /* novation SoundControl XL */ + { USB_DEVICE(0x1235, 0x0061), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Focusrite Scarlett Solo USB */ + { USB_DEVICE(0x1235, 0x8211), .driver_info = + USB_QUIRK_DISCONNECT_SUSPEND }, + + /* Huawei 4G LTE module */ + { USB_DEVICE(0x12d1, 0x15bb), .driver_info = + USB_QUIRK_DISCONNECT_SUSPEND }, + { USB_DEVICE(0x12d1, 0x15c3), .driver_info = + USB_QUIRK_DISCONNECT_SUSPEND }, + + /* SKYMEDI USB_DRIVE */ + { USB_DEVICE(0x1516, 0x8628), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Razer - Razer Blade Keyboard */ + { USB_DEVICE(0x1532, 0x0116), .driver_info = + USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, + + /* Lenovo ThinkPad OneLink+ Dock twin hub controllers (VIA Labs VL812) */ + { USB_DEVICE(0x17ef, 0x1018), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x17ef, 0x1019), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Lenovo USB-C to Ethernet Adapter RTL8153-04 */ + { USB_DEVICE(0x17ef, 0x720c), .driver_info = USB_QUIRK_NO_LPM }, + + /* Lenovo Powered USB-C Travel Hub (4X90S92381, RTL8153 GigE) */ + { USB_DEVICE(0x17ef, 0x721e), .driver_info = USB_QUIRK_NO_LPM }, + + /* Lenovo ThinkCenter A630Z TI024Gen3 usb-audio */ + { USB_DEVICE(0x17ef, 0xa012), .driver_info = + USB_QUIRK_DISCONNECT_SUSPEND }, + + /* Lenovo ThinkPad USB-C Dock Gen2 Ethernet (RTL8153 GigE) */ + { USB_DEVICE(0x17ef, 0xa387), .driver_info = USB_QUIRK_NO_LPM }, + + /* BUILDWIN Photo Frame */ + { USB_DEVICE(0x1908, 0x1315), .driver_info = + USB_QUIRK_HONOR_BNUMINTERFACES }, + + /* Protocol and OTG Electrical Test Device */ + { USB_DEVICE(0x1a0a, 0x0200), .driver_info = + USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, + + /* Terminus Technology Inc. Hub */ + { USB_DEVICE(0x1a40, 0x0101), .driver_info = USB_QUIRK_HUB_SLOW_RESET }, + + /* Corsair K70 RGB */ + { USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT | + USB_QUIRK_DELAY_CTRL_MSG }, + + /* Corsair Strafe */ + { USB_DEVICE(0x1b1c, 0x1b15), .driver_info = USB_QUIRK_DELAY_INIT | + USB_QUIRK_DELAY_CTRL_MSG }, + + /* Corsair Strafe RGB */ + { USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT | + USB_QUIRK_DELAY_CTRL_MSG }, + + /* Corsair K70 LUX RGB */ + { USB_DEVICE(0x1b1c, 0x1b33), .driver_info = USB_QUIRK_DELAY_INIT }, + + /* Corsair K70 LUX */ + { USB_DEVICE(0x1b1c, 0x1b36), .driver_info = USB_QUIRK_DELAY_INIT }, + + /* Corsair K70 RGB RAPDIFIRE */ + { USB_DEVICE(0x1b1c, 0x1b38), .driver_info = USB_QUIRK_DELAY_INIT | + USB_QUIRK_DELAY_CTRL_MSG }, + + /* MIDI keyboard WORLDE MINI */ + { USB_DEVICE(0x1c75, 0x0204), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + + /* Acer C120 LED Projector */ + { USB_DEVICE(0x1de1, 0xc102), .driver_info = USB_QUIRK_NO_LPM }, + + /* Blackmagic Design Intensity Shuttle */ + { USB_DEVICE(0x1edb, 0xbd3b), .driver_info = USB_QUIRK_NO_LPM }, + + /* Blackmagic Design UltraStudio SDI */ + { USB_DEVICE(0x1edb, 0xbd4f), .driver_info = USB_QUIRK_NO_LPM }, + + /* Hauppauge HVR-950q */ + { USB_DEVICE(0x2040, 0x7200), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + + /* Raydium Touchscreen */ + { USB_DEVICE(0x2386, 0x3114), .driver_info = USB_QUIRK_NO_LPM }, + + { USB_DEVICE(0x2386, 0x3119), .driver_info = USB_QUIRK_NO_LPM }, + + { USB_DEVICE(0x2386, 0x350e), .driver_info = USB_QUIRK_NO_LPM }, + + /* DJI CineSSD */ + { USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM }, + + /* Alcor Link AK9563 SC Reader used in 2022 Lenovo ThinkPads */ + { USB_DEVICE(0x2ce3, 0x9563), .driver_info = USB_QUIRK_NO_LPM }, + + /* DELL USB GEN2 */ + { USB_DEVICE(0x413c, 0xb062), .driver_info = USB_QUIRK_NO_LPM | USB_QUIRK_RESET_RESUME }, + + /* VCOM device */ + { USB_DEVICE(0x4296, 0x7570), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, + + /* INTEL VALUE SSD */ + { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME }, + + { } /* terminating entry must be last */ +}; + +static const struct usb_device_id usb_interface_quirk_list[] = { + /* Logitech UVC Cameras */ + { USB_VENDOR_AND_INTERFACE_INFO(0x046d, USB_CLASS_VIDEO, 1, 0), + .driver_info = USB_QUIRK_RESET_RESUME }, + + { } /* terminating entry must be last */ +}; + +static const struct usb_device_id usb_amd_resume_quirk_list[] = { + /* Lenovo Mouse with Pixart controller */ + { USB_DEVICE(0x17ef, 0x602e), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Pixart Mouse */ + { USB_DEVICE(0x093a, 0x2500), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x093a, 0x2510), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x093a, 0x2521), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x03f0, 0x2b4a), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Optical Mouse M90/M100 */ + { USB_DEVICE(0x046d, 0xc05a), .driver_info = USB_QUIRK_RESET_RESUME }, + + { } /* terminating entry must be last */ +}; + +/* + * Entries for endpoints that should be ignored when parsing configuration + * descriptors. + * + * Matched for devices with USB_QUIRK_ENDPOINT_IGNORE. + */ +static const struct usb_device_id usb_endpoint_ignore[] = { + { USB_DEVICE_INTERFACE_NUMBER(0x06f8, 0xb000, 5), .driver_info = 0x01 }, + { USB_DEVICE_INTERFACE_NUMBER(0x06f8, 0xb000, 5), .driver_info = 0x81 }, + { USB_DEVICE_INTERFACE_NUMBER(0x0926, 0x0202, 1), .driver_info = 0x85 }, + { USB_DEVICE_INTERFACE_NUMBER(0x0926, 0x0208, 1), .driver_info = 0x85 }, + { } +}; + +bool usb_endpoint_is_ignored(struct usb_device *udev, + struct usb_host_interface *intf, + struct usb_endpoint_descriptor *epd) +{ + const struct usb_device_id *id; + unsigned int address; + + for (id = usb_endpoint_ignore; id->match_flags; ++id) { + if (!usb_match_device(udev, id)) + continue; + + if (!usb_match_one_id_intf(udev, intf, id)) + continue; + + address = id->driver_info; + if (address == epd->bEndpointAddress) + return true; + } + + return false; +} + +static bool usb_match_any_interface(struct usb_device *udev, + const struct usb_device_id *id) +{ + unsigned int i; + + for (i = 0; i < udev->descriptor.bNumConfigurations; ++i) { + struct usb_host_config *cfg = &udev->config[i]; + unsigned int j; + + for (j = 0; j < cfg->desc.bNumInterfaces; ++j) { + struct usb_interface_cache *cache; + struct usb_host_interface *intf; + + cache = cfg->intf_cache[j]; + if (cache->num_altsetting == 0) + continue; + + intf = &cache->altsetting[0]; + if (usb_match_one_id_intf(udev, intf, id)) + return true; + } + } + + return false; +} + +static int usb_amd_resume_quirk(struct usb_device *udev) +{ + struct usb_hcd *hcd; + + hcd = bus_to_hcd(udev->bus); + /* The device should be attached directly to root hub */ + if (udev->level == 1 && hcd->amd_resume_bug == 1) + return 1; + + return 0; +} + +static u32 usb_detect_static_quirks(struct usb_device *udev, + const struct usb_device_id *id) +{ + u32 quirks = 0; + + for (; id->match_flags; id++) { + if (!usb_match_device(udev, id)) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_INFO) && + !usb_match_any_interface(udev, id)) + continue; + + quirks |= (u32)(id->driver_info); + } + + return quirks; +} + +static u32 usb_detect_dynamic_quirks(struct usb_device *udev) +{ + u16 vid = le16_to_cpu(udev->descriptor.idVendor); + u16 pid = le16_to_cpu(udev->descriptor.idProduct); + int i, flags = 0; + + mutex_lock(&quirk_mutex); + + for (i = 0; i < quirk_count; i++) { + if (vid == quirk_list[i].vid && pid == quirk_list[i].pid) { + flags = quirk_list[i].flags; + break; + } + } + + mutex_unlock(&quirk_mutex); + + return flags; +} + +/* + * Detect any quirks the device has, and do any housekeeping for it if needed. + */ +void usb_detect_quirks(struct usb_device *udev) +{ + udev->quirks = usb_detect_static_quirks(udev, usb_quirk_list); + + /* + * Pixart-based mice would trigger remote wakeup issue on AMD + * Yangtze chipset, so set them as RESET_RESUME flag. + */ + if (usb_amd_resume_quirk(udev)) + udev->quirks |= usb_detect_static_quirks(udev, + usb_amd_resume_quirk_list); + + udev->quirks ^= usb_detect_dynamic_quirks(udev); + + if (udev->quirks) + dev_dbg(&udev->dev, "USB quirks for this device: %x\n", + udev->quirks); + +#ifdef CONFIG_USB_DEFAULT_PERSIST + if (!(udev->quirks & USB_QUIRK_RESET)) + udev->persist_enabled = 1; +#else + /* Hubs are automatically enabled for USB-PERSIST */ + if (udev->descriptor.bDeviceClass == USB_CLASS_HUB) + udev->persist_enabled = 1; +#endif /* CONFIG_USB_DEFAULT_PERSIST */ +} + +void usb_detect_interface_quirks(struct usb_device *udev) +{ + u32 quirks; + + quirks = usb_detect_static_quirks(udev, usb_interface_quirk_list); + if (quirks == 0) + return; + + dev_dbg(&udev->dev, "USB interface quirks for this device: %x\n", + quirks); + udev->quirks |= quirks; +} + +void usb_release_quirk_list(void) +{ + mutex_lock(&quirk_mutex); + kfree(quirk_list); + quirk_list = NULL; + mutex_unlock(&quirk_mutex); +} diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c new file mode 100644 index 000000000..ccf6cd972 --- /dev/null +++ b/drivers/usb/core/sysfs.c @@ -0,0 +1,1259 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * drivers/usb/core/sysfs.c + * + * (C) Copyright 2002 David Brownell + * (C) Copyright 2002,2004 Greg Kroah-Hartman + * (C) Copyright 2002,2004 IBM Corp. + * + * All of the sysfs file attributes for usb devices and interfaces. + * + * Released under the GPLv2 only. + */ + + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> +#include <linux/usb/quirks.h> +#include <linux/of.h> +#include "usb.h" + +/* Active configuration fields */ +#define usb_actconfig_show(field, format_string) \ +static ssize_t field##_show(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct usb_device *udev; \ + struct usb_host_config *actconfig; \ + ssize_t rc; \ + \ + udev = to_usb_device(dev); \ + rc = usb_lock_device_interruptible(udev); \ + if (rc < 0) \ + return -EINTR; \ + actconfig = udev->actconfig; \ + if (actconfig) \ + rc = sysfs_emit(buf, format_string, \ + actconfig->desc.field); \ + usb_unlock_device(udev); \ + return rc; \ +} \ + +#define usb_actconfig_attr(field, format_string) \ + usb_actconfig_show(field, format_string) \ + static DEVICE_ATTR_RO(field) + +usb_actconfig_attr(bNumInterfaces, "%2d\n"); +usb_actconfig_attr(bmAttributes, "%2x\n"); + +static ssize_t bMaxPower_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_device *udev; + struct usb_host_config *actconfig; + ssize_t rc; + + udev = to_usb_device(dev); + rc = usb_lock_device_interruptible(udev); + if (rc < 0) + return -EINTR; + actconfig = udev->actconfig; + if (actconfig) + rc = sysfs_emit(buf, "%dmA\n", usb_get_max_power(udev, actconfig)); + usb_unlock_device(udev); + return rc; +} +static DEVICE_ATTR_RO(bMaxPower); + +static ssize_t configuration_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_device *udev; + struct usb_host_config *actconfig; + ssize_t rc; + + udev = to_usb_device(dev); + rc = usb_lock_device_interruptible(udev); + if (rc < 0) + return -EINTR; + actconfig = udev->actconfig; + if (actconfig && actconfig->string) + rc = sysfs_emit(buf, "%s\n", actconfig->string); + usb_unlock_device(udev); + return rc; +} +static DEVICE_ATTR_RO(configuration); + +/* configuration value is always present, and r/w */ +usb_actconfig_show(bConfigurationValue, "%u\n"); + +static ssize_t bConfigurationValue_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_device *udev = to_usb_device(dev); + int config, value, rc; + + if (sscanf(buf, "%d", &config) != 1 || config < -1 || config > 255) + return -EINVAL; + rc = usb_lock_device_interruptible(udev); + if (rc < 0) + return -EINTR; + value = usb_set_configuration(udev, config); + usb_unlock_device(udev); + return (value < 0) ? value : count; +} +static DEVICE_ATTR_IGNORE_LOCKDEP(bConfigurationValue, S_IRUGO | S_IWUSR, + bConfigurationValue_show, bConfigurationValue_store); + +#ifdef CONFIG_OF +static ssize_t devspec_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct device_node *of_node = dev->of_node; + + return sysfs_emit(buf, "%pOF\n", of_node); +} +static DEVICE_ATTR_RO(devspec); +#endif + +/* String fields */ +#define usb_string_attr(name) \ +static ssize_t name##_show(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct usb_device *udev; \ + int retval; \ + \ + udev = to_usb_device(dev); \ + retval = usb_lock_device_interruptible(udev); \ + if (retval < 0) \ + return -EINTR; \ + retval = sysfs_emit(buf, "%s\n", udev->name); \ + usb_unlock_device(udev); \ + return retval; \ +} \ +static DEVICE_ATTR_RO(name) + +usb_string_attr(product); +usb_string_attr(manufacturer); +usb_string_attr(serial); + +static ssize_t speed_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_device *udev; + char *speed; + + udev = to_usb_device(dev); + + switch (udev->speed) { + case USB_SPEED_LOW: + speed = "1.5"; + break; + case USB_SPEED_UNKNOWN: + case USB_SPEED_FULL: + speed = "12"; + break; + case USB_SPEED_HIGH: + speed = "480"; + break; + case USB_SPEED_WIRELESS: + speed = "480"; + break; + case USB_SPEED_SUPER: + speed = "5000"; + break; + case USB_SPEED_SUPER_PLUS: + if (udev->ssp_rate == USB_SSP_GEN_2x2) + speed = "20000"; + else + speed = "10000"; + break; + default: + speed = "unknown"; + } + return sysfs_emit(buf, "%s\n", speed); +} +static DEVICE_ATTR_RO(speed); + +static ssize_t rx_lanes_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_device *udev; + + udev = to_usb_device(dev); + return sysfs_emit(buf, "%d\n", udev->rx_lanes); +} +static DEVICE_ATTR_RO(rx_lanes); + +static ssize_t tx_lanes_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_device *udev; + + udev = to_usb_device(dev); + return sysfs_emit(buf, "%d\n", udev->tx_lanes); +} +static DEVICE_ATTR_RO(tx_lanes); + +static ssize_t busnum_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_device *udev; + + udev = to_usb_device(dev); + return sysfs_emit(buf, "%d\n", udev->bus->busnum); +} +static DEVICE_ATTR_RO(busnum); + +static ssize_t devnum_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_device *udev; + + udev = to_usb_device(dev); + return sysfs_emit(buf, "%d\n", udev->devnum); +} +static DEVICE_ATTR_RO(devnum); + +static ssize_t devpath_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_device *udev; + + udev = to_usb_device(dev); + return sysfs_emit(buf, "%s\n", udev->devpath); +} +static DEVICE_ATTR_RO(devpath); + +static ssize_t version_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_device *udev; + u16 bcdUSB; + + udev = to_usb_device(dev); + bcdUSB = le16_to_cpu(udev->descriptor.bcdUSB); + return sysfs_emit(buf, "%2x.%02x\n", bcdUSB >> 8, bcdUSB & 0xff); +} +static DEVICE_ATTR_RO(version); + +static ssize_t maxchild_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_device *udev; + + udev = to_usb_device(dev); + return sysfs_emit(buf, "%d\n", udev->maxchild); +} +static DEVICE_ATTR_RO(maxchild); + +static ssize_t quirks_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_device *udev; + + udev = to_usb_device(dev); + return sysfs_emit(buf, "0x%x\n", udev->quirks); +} +static DEVICE_ATTR_RO(quirks); + +static ssize_t avoid_reset_quirk_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_device *udev; + + udev = to_usb_device(dev); + return sysfs_emit(buf, "%d\n", !!(udev->quirks & USB_QUIRK_RESET)); +} + +static ssize_t avoid_reset_quirk_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_device *udev = to_usb_device(dev); + int val, rc; + + if (sscanf(buf, "%d", &val) != 1 || val < 0 || val > 1) + return -EINVAL; + rc = usb_lock_device_interruptible(udev); + if (rc < 0) + return -EINTR; + if (val) + udev->quirks |= USB_QUIRK_RESET; + else + udev->quirks &= ~USB_QUIRK_RESET; + usb_unlock_device(udev); + return count; +} +static DEVICE_ATTR_RW(avoid_reset_quirk); + +static ssize_t urbnum_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_device *udev; + + udev = to_usb_device(dev); + return sysfs_emit(buf, "%d\n", atomic_read(&udev->urbnum)); +} +static DEVICE_ATTR_RO(urbnum); + +static ssize_t ltm_capable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + if (usb_device_supports_ltm(to_usb_device(dev))) + return sysfs_emit(buf, "%s\n", "yes"); + return sysfs_emit(buf, "%s\n", "no"); +} +static DEVICE_ATTR_RO(ltm_capable); + +#ifdef CONFIG_PM + +static ssize_t persist_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_device *udev = to_usb_device(dev); + + return sysfs_emit(buf, "%d\n", udev->persist_enabled); +} + +static ssize_t persist_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_device *udev = to_usb_device(dev); + int value, rc; + + /* Hubs are always enabled for USB_PERSIST */ + if (udev->descriptor.bDeviceClass == USB_CLASS_HUB) + return -EPERM; + + if (sscanf(buf, "%d", &value) != 1) + return -EINVAL; + + rc = usb_lock_device_interruptible(udev); + if (rc < 0) + return -EINTR; + udev->persist_enabled = !!value; + usb_unlock_device(udev); + return count; +} +static DEVICE_ATTR_RW(persist); + +static int add_persist_attributes(struct device *dev) +{ + int rc = 0; + + if (is_usb_device(dev)) { + struct usb_device *udev = to_usb_device(dev); + + /* Hubs are automatically enabled for USB_PERSIST, + * no point in creating the attribute file. + */ + if (udev->descriptor.bDeviceClass != USB_CLASS_HUB) + rc = sysfs_add_file_to_group(&dev->kobj, + &dev_attr_persist.attr, + power_group_name); + } + return rc; +} + +static void remove_persist_attributes(struct device *dev) +{ + sysfs_remove_file_from_group(&dev->kobj, + &dev_attr_persist.attr, + power_group_name); +} + +static ssize_t connected_duration_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_device *udev = to_usb_device(dev); + + return sysfs_emit(buf, "%u\n", + jiffies_to_msecs(jiffies - udev->connect_time)); +} +static DEVICE_ATTR_RO(connected_duration); + +/* + * If the device is resumed, the last time the device was suspended has + * been pre-subtracted from active_duration. We add the current time to + * get the duration that the device was actually active. + * + * If the device is suspended, the active_duration is up-to-date. + */ +static ssize_t active_duration_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_device *udev = to_usb_device(dev); + int duration; + + if (udev->state != USB_STATE_SUSPENDED) + duration = jiffies_to_msecs(jiffies + udev->active_duration); + else + duration = jiffies_to_msecs(udev->active_duration); + return sysfs_emit(buf, "%u\n", duration); +} +static DEVICE_ATTR_RO(active_duration); + +static ssize_t autosuspend_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sysfs_emit(buf, "%d\n", dev->power.autosuspend_delay / 1000); +} + +static ssize_t autosuspend_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + int value; + + if (sscanf(buf, "%d", &value) != 1 || value >= INT_MAX/1000 || + value <= -INT_MAX/1000) + return -EINVAL; + + pm_runtime_set_autosuspend_delay(dev, value * 1000); + return count; +} +static DEVICE_ATTR_RW(autosuspend); + +static const char on_string[] = "on"; +static const char auto_string[] = "auto"; + +static void warn_level(void) +{ + static int level_warned; + + if (!level_warned) { + level_warned = 1; + printk(KERN_WARNING "WARNING! power/level is deprecated; " + "use power/control instead\n"); + } +} + +static ssize_t level_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_device *udev = to_usb_device(dev); + const char *p = auto_string; + + warn_level(); + if (udev->state != USB_STATE_SUSPENDED && !udev->dev.power.runtime_auto) + p = on_string; + return sysfs_emit(buf, "%s\n", p); +} + +static ssize_t level_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_device *udev = to_usb_device(dev); + int len = count; + char *cp; + int rc = count; + int rv; + + warn_level(); + cp = memchr(buf, '\n', count); + if (cp) + len = cp - buf; + + rv = usb_lock_device_interruptible(udev); + if (rv < 0) + return -EINTR; + + if (len == sizeof on_string - 1 && + strncmp(buf, on_string, len) == 0) + usb_disable_autosuspend(udev); + + else if (len == sizeof auto_string - 1 && + strncmp(buf, auto_string, len) == 0) + usb_enable_autosuspend(udev); + + else + rc = -EINVAL; + + usb_unlock_device(udev); + return rc; +} +static DEVICE_ATTR_RW(level); + +static ssize_t usb2_hardware_lpm_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_device *udev = to_usb_device(dev); + const char *p; + + if (udev->usb2_hw_lpm_allowed == 1) + p = "enabled"; + else + p = "disabled"; + + return sysfs_emit(buf, "%s\n", p); +} + +static ssize_t usb2_hardware_lpm_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_device *udev = to_usb_device(dev); + bool value; + int ret; + + ret = usb_lock_device_interruptible(udev); + if (ret < 0) + return -EINTR; + + ret = strtobool(buf, &value); + + if (!ret) { + udev->usb2_hw_lpm_allowed = value; + if (value) + ret = usb_enable_usb2_hardware_lpm(udev); + else + ret = usb_disable_usb2_hardware_lpm(udev); + } + + usb_unlock_device(udev); + + if (!ret) + return count; + + return ret; +} +static DEVICE_ATTR_RW(usb2_hardware_lpm); + +static ssize_t usb2_lpm_l1_timeout_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct usb_device *udev = to_usb_device(dev); + return sysfs_emit(buf, "%d\n", udev->l1_params.timeout); +} + +static ssize_t usb2_lpm_l1_timeout_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_device *udev = to_usb_device(dev); + u16 timeout; + + if (kstrtou16(buf, 0, &timeout)) + return -EINVAL; + + udev->l1_params.timeout = timeout; + + return count; +} +static DEVICE_ATTR_RW(usb2_lpm_l1_timeout); + +static ssize_t usb2_lpm_besl_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_device *udev = to_usb_device(dev); + return sysfs_emit(buf, "%d\n", udev->l1_params.besl); +} + +static ssize_t usb2_lpm_besl_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_device *udev = to_usb_device(dev); + u8 besl; + + if (kstrtou8(buf, 0, &besl) || besl > 15) + return -EINVAL; + + udev->l1_params.besl = besl; + + return count; +} +static DEVICE_ATTR_RW(usb2_lpm_besl); + +static ssize_t usb3_hardware_lpm_u1_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_device *udev = to_usb_device(dev); + const char *p; + int rc; + + rc = usb_lock_device_interruptible(udev); + if (rc < 0) + return -EINTR; + + if (udev->usb3_lpm_u1_enabled) + p = "enabled"; + else + p = "disabled"; + + usb_unlock_device(udev); + + return sysfs_emit(buf, "%s\n", p); +} +static DEVICE_ATTR_RO(usb3_hardware_lpm_u1); + +static ssize_t usb3_hardware_lpm_u2_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_device *udev = to_usb_device(dev); + const char *p; + int rc; + + rc = usb_lock_device_interruptible(udev); + if (rc < 0) + return -EINTR; + + if (udev->usb3_lpm_u2_enabled) + p = "enabled"; + else + p = "disabled"; + + usb_unlock_device(udev); + + return sysfs_emit(buf, "%s\n", p); +} +static DEVICE_ATTR_RO(usb3_hardware_lpm_u2); + +static struct attribute *usb2_hardware_lpm_attr[] = { + &dev_attr_usb2_hardware_lpm.attr, + &dev_attr_usb2_lpm_l1_timeout.attr, + &dev_attr_usb2_lpm_besl.attr, + NULL, +}; +static const struct attribute_group usb2_hardware_lpm_attr_group = { + .name = power_group_name, + .attrs = usb2_hardware_lpm_attr, +}; + +static struct attribute *usb3_hardware_lpm_attr[] = { + &dev_attr_usb3_hardware_lpm_u1.attr, + &dev_attr_usb3_hardware_lpm_u2.attr, + NULL, +}; +static const struct attribute_group usb3_hardware_lpm_attr_group = { + .name = power_group_name, + .attrs = usb3_hardware_lpm_attr, +}; + +static struct attribute *power_attrs[] = { + &dev_attr_autosuspend.attr, + &dev_attr_level.attr, + &dev_attr_connected_duration.attr, + &dev_attr_active_duration.attr, + NULL, +}; +static const struct attribute_group power_attr_group = { + .name = power_group_name, + .attrs = power_attrs, +}; + +static int add_power_attributes(struct device *dev) +{ + int rc = 0; + + if (is_usb_device(dev)) { + struct usb_device *udev = to_usb_device(dev); + rc = sysfs_merge_group(&dev->kobj, &power_attr_group); + if (udev->usb2_hw_lpm_capable == 1) + rc = sysfs_merge_group(&dev->kobj, + &usb2_hardware_lpm_attr_group); + if ((udev->speed == USB_SPEED_SUPER || + udev->speed == USB_SPEED_SUPER_PLUS) && + udev->lpm_capable == 1) + rc = sysfs_merge_group(&dev->kobj, + &usb3_hardware_lpm_attr_group); + } + + return rc; +} + +static void remove_power_attributes(struct device *dev) +{ + sysfs_unmerge_group(&dev->kobj, &usb2_hardware_lpm_attr_group); + sysfs_unmerge_group(&dev->kobj, &power_attr_group); +} + +#else + +#define add_persist_attributes(dev) 0 +#define remove_persist_attributes(dev) do {} while (0) + +#define add_power_attributes(dev) 0 +#define remove_power_attributes(dev) do {} while (0) + +#endif /* CONFIG_PM */ + + +/* Descriptor fields */ +#define usb_descriptor_attr_le16(field, format_string) \ +static ssize_t \ +field##_show(struct device *dev, struct device_attribute *attr, \ + char *buf) \ +{ \ + struct usb_device *udev; \ + \ + udev = to_usb_device(dev); \ + return sysfs_emit(buf, format_string, \ + le16_to_cpu(udev->descriptor.field)); \ +} \ +static DEVICE_ATTR_RO(field) + +usb_descriptor_attr_le16(idVendor, "%04x\n"); +usb_descriptor_attr_le16(idProduct, "%04x\n"); +usb_descriptor_attr_le16(bcdDevice, "%04x\n"); + +#define usb_descriptor_attr(field, format_string) \ +static ssize_t \ +field##_show(struct device *dev, struct device_attribute *attr, \ + char *buf) \ +{ \ + struct usb_device *udev; \ + \ + udev = to_usb_device(dev); \ + return sysfs_emit(buf, format_string, udev->descriptor.field); \ +} \ +static DEVICE_ATTR_RO(field) + +usb_descriptor_attr(bDeviceClass, "%02x\n"); +usb_descriptor_attr(bDeviceSubClass, "%02x\n"); +usb_descriptor_attr(bDeviceProtocol, "%02x\n"); +usb_descriptor_attr(bNumConfigurations, "%d\n"); +usb_descriptor_attr(bMaxPacketSize0, "%d\n"); + + +/* show if the device is authorized (1) or not (0) */ +static ssize_t authorized_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_device *usb_dev = to_usb_device(dev); + return sysfs_emit(buf, "%u\n", usb_dev->authorized); +} + +/* + * Authorize a device to be used in the system + * + * Writing a 0 deauthorizes the device, writing a 1 authorizes it. + */ +static ssize_t authorized_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t size) +{ + ssize_t result; + struct usb_device *usb_dev = to_usb_device(dev); + unsigned val; + result = sscanf(buf, "%u\n", &val); + if (result != 1) + result = -EINVAL; + else if (val == 0) + result = usb_deauthorize_device(usb_dev); + else + result = usb_authorize_device(usb_dev); + return result < 0 ? result : size; +} +static DEVICE_ATTR_IGNORE_LOCKDEP(authorized, S_IRUGO | S_IWUSR, + authorized_show, authorized_store); + +/* "Safely remove a device" */ +static ssize_t remove_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_device *udev = to_usb_device(dev); + int rc = 0; + + usb_lock_device(udev); + if (udev->state != USB_STATE_NOTATTACHED) { + + /* To avoid races, first unconfigure and then remove */ + usb_set_configuration(udev, -1); + rc = usb_remove_device(udev); + } + if (rc == 0) + rc = count; + usb_unlock_device(udev); + return rc; +} +static DEVICE_ATTR_IGNORE_LOCKDEP(remove, S_IWUSR, NULL, remove_store); + + +static struct attribute *dev_attrs[] = { + /* current configuration's attributes */ + &dev_attr_configuration.attr, + &dev_attr_bNumInterfaces.attr, + &dev_attr_bConfigurationValue.attr, + &dev_attr_bmAttributes.attr, + &dev_attr_bMaxPower.attr, + /* device attributes */ + &dev_attr_urbnum.attr, + &dev_attr_idVendor.attr, + &dev_attr_idProduct.attr, + &dev_attr_bcdDevice.attr, + &dev_attr_bDeviceClass.attr, + &dev_attr_bDeviceSubClass.attr, + &dev_attr_bDeviceProtocol.attr, + &dev_attr_bNumConfigurations.attr, + &dev_attr_bMaxPacketSize0.attr, + &dev_attr_speed.attr, + &dev_attr_rx_lanes.attr, + &dev_attr_tx_lanes.attr, + &dev_attr_busnum.attr, + &dev_attr_devnum.attr, + &dev_attr_devpath.attr, + &dev_attr_version.attr, + &dev_attr_maxchild.attr, + &dev_attr_quirks.attr, + &dev_attr_avoid_reset_quirk.attr, + &dev_attr_authorized.attr, + &dev_attr_remove.attr, + &dev_attr_ltm_capable.attr, +#ifdef CONFIG_OF + &dev_attr_devspec.attr, +#endif + NULL, +}; +static const struct attribute_group dev_attr_grp = { + .attrs = dev_attrs, +}; + +/* When modifying this list, be sure to modify dev_string_attrs_are_visible() + * accordingly. + */ +static struct attribute *dev_string_attrs[] = { + &dev_attr_manufacturer.attr, + &dev_attr_product.attr, + &dev_attr_serial.attr, + NULL +}; + +static umode_t dev_string_attrs_are_visible(struct kobject *kobj, + struct attribute *a, int n) +{ + struct device *dev = kobj_to_dev(kobj); + struct usb_device *udev = to_usb_device(dev); + + if (a == &dev_attr_manufacturer.attr) { + if (udev->manufacturer == NULL) + return 0; + } else if (a == &dev_attr_product.attr) { + if (udev->product == NULL) + return 0; + } else if (a == &dev_attr_serial.attr) { + if (udev->serial == NULL) + return 0; + } + return a->mode; +} + +static const struct attribute_group dev_string_attr_grp = { + .attrs = dev_string_attrs, + .is_visible = dev_string_attrs_are_visible, +}; + +const struct attribute_group *usb_device_groups[] = { + &dev_attr_grp, + &dev_string_attr_grp, + NULL +}; + +/* Binary descriptors */ + +static ssize_t +read_descriptors(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t off, size_t count) +{ + struct device *dev = kobj_to_dev(kobj); + struct usb_device *udev = to_usb_device(dev); + size_t nleft = count; + size_t srclen, n; + int cfgno; + void *src; + + /* The binary attribute begins with the device descriptor. + * Following that are the raw descriptor entries for all the + * configurations (config plus subsidiary descriptors). + */ + for (cfgno = -1; cfgno < udev->descriptor.bNumConfigurations && + nleft > 0; ++cfgno) { + if (cfgno < 0) { + src = &udev->descriptor; + srclen = sizeof(struct usb_device_descriptor); + } else { + src = udev->rawdescriptors[cfgno]; + srclen = __le16_to_cpu(udev->config[cfgno].desc. + wTotalLength); + } + if (off < srclen) { + n = min(nleft, srclen - (size_t) off); + memcpy(buf, src + off, n); + nleft -= n; + buf += n; + off = 0; + } else { + off -= srclen; + } + } + return count - nleft; +} + +static struct bin_attribute dev_bin_attr_descriptors = { + .attr = {.name = "descriptors", .mode = 0444}, + .read = read_descriptors, + .size = 18 + 65535, /* dev descr + max-size raw descriptor */ +}; + +/* + * Show & store the current value of authorized_default + */ +static ssize_t authorized_default_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_device *rh_usb_dev = to_usb_device(dev); + struct usb_bus *usb_bus = rh_usb_dev->bus; + struct usb_hcd *hcd; + + hcd = bus_to_hcd(usb_bus); + return sysfs_emit(buf, "%u\n", hcd->dev_policy); +} + +static ssize_t authorized_default_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + ssize_t result; + unsigned int val; + struct usb_device *rh_usb_dev = to_usb_device(dev); + struct usb_bus *usb_bus = rh_usb_dev->bus; + struct usb_hcd *hcd; + + hcd = bus_to_hcd(usb_bus); + result = sscanf(buf, "%u\n", &val); + if (result == 1) { + hcd->dev_policy = val <= USB_DEVICE_AUTHORIZE_INTERNAL ? + val : USB_DEVICE_AUTHORIZE_ALL; + result = size; + } else { + result = -EINVAL; + } + return result; +} +static DEVICE_ATTR_RW(authorized_default); + +/* + * interface_authorized_default_show - show default authorization status + * for USB interfaces + * + * note: interface_authorized_default is the default value + * for initializing the authorized attribute of interfaces + */ +static ssize_t interface_authorized_default_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_device *usb_dev = to_usb_device(dev); + struct usb_hcd *hcd = bus_to_hcd(usb_dev->bus); + + return sysfs_emit(buf, "%u\n", !!HCD_INTF_AUTHORIZED(hcd)); +} + +/* + * interface_authorized_default_store - store default authorization status + * for USB interfaces + * + * note: interface_authorized_default is the default value + * for initializing the authorized attribute of interfaces + */ +static ssize_t interface_authorized_default_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct usb_device *usb_dev = to_usb_device(dev); + struct usb_hcd *hcd = bus_to_hcd(usb_dev->bus); + int rc = count; + bool val; + + if (strtobool(buf, &val) != 0) + return -EINVAL; + + if (val) + set_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags); + else + clear_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags); + + return rc; +} +static DEVICE_ATTR_RW(interface_authorized_default); + +/* Group all the USB bus attributes */ +static struct attribute *usb_bus_attrs[] = { + &dev_attr_authorized_default.attr, + &dev_attr_interface_authorized_default.attr, + NULL, +}; + +static const struct attribute_group usb_bus_attr_group = { + .name = NULL, /* we want them in the same directory */ + .attrs = usb_bus_attrs, +}; + + +static int add_default_authorized_attributes(struct device *dev) +{ + int rc = 0; + + if (is_usb_device(dev)) + rc = sysfs_create_group(&dev->kobj, &usb_bus_attr_group); + + return rc; +} + +static void remove_default_authorized_attributes(struct device *dev) +{ + if (is_usb_device(dev)) { + sysfs_remove_group(&dev->kobj, &usb_bus_attr_group); + } +} + +int usb_create_sysfs_dev_files(struct usb_device *udev) +{ + struct device *dev = &udev->dev; + int retval; + + retval = device_create_bin_file(dev, &dev_bin_attr_descriptors); + if (retval) + goto error; + + retval = add_persist_attributes(dev); + if (retval) + goto error; + + retval = add_power_attributes(dev); + if (retval) + goto error; + + if (is_root_hub(udev)) { + retval = add_default_authorized_attributes(dev); + if (retval) + goto error; + } + return retval; + +error: + usb_remove_sysfs_dev_files(udev); + return retval; +} + +void usb_remove_sysfs_dev_files(struct usb_device *udev) +{ + struct device *dev = &udev->dev; + + if (is_root_hub(udev)) + remove_default_authorized_attributes(dev); + + remove_power_attributes(dev); + remove_persist_attributes(dev); + device_remove_bin_file(dev, &dev_bin_attr_descriptors); +} + +/* Interface Association Descriptor fields */ +#define usb_intf_assoc_attr(field, format_string) \ +static ssize_t \ +iad_##field##_show(struct device *dev, struct device_attribute *attr, \ + char *buf) \ +{ \ + struct usb_interface *intf = to_usb_interface(dev); \ + \ + return sysfs_emit(buf, format_string, \ + intf->intf_assoc->field); \ +} \ +static DEVICE_ATTR_RO(iad_##field) + +usb_intf_assoc_attr(bFirstInterface, "%02x\n"); +usb_intf_assoc_attr(bInterfaceCount, "%02d\n"); +usb_intf_assoc_attr(bFunctionClass, "%02x\n"); +usb_intf_assoc_attr(bFunctionSubClass, "%02x\n"); +usb_intf_assoc_attr(bFunctionProtocol, "%02x\n"); + +/* Interface fields */ +#define usb_intf_attr(field, format_string) \ +static ssize_t \ +field##_show(struct device *dev, struct device_attribute *attr, \ + char *buf) \ +{ \ + struct usb_interface *intf = to_usb_interface(dev); \ + \ + return sysfs_emit(buf, format_string, \ + intf->cur_altsetting->desc.field); \ +} \ +static DEVICE_ATTR_RO(field) + +usb_intf_attr(bInterfaceNumber, "%02x\n"); +usb_intf_attr(bAlternateSetting, "%2d\n"); +usb_intf_attr(bNumEndpoints, "%02x\n"); +usb_intf_attr(bInterfaceClass, "%02x\n"); +usb_intf_attr(bInterfaceSubClass, "%02x\n"); +usb_intf_attr(bInterfaceProtocol, "%02x\n"); + +static ssize_t interface_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_interface *intf; + char *string; + + intf = to_usb_interface(dev); + string = READ_ONCE(intf->cur_altsetting->string); + if (!string) + return 0; + return sysfs_emit(buf, "%s\n", string); +} +static DEVICE_ATTR_RO(interface); + +static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_interface *intf; + struct usb_device *udev; + struct usb_host_interface *alt; + + intf = to_usb_interface(dev); + udev = interface_to_usbdev(intf); + alt = READ_ONCE(intf->cur_altsetting); + + return sysfs_emit(buf, + "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02X" + "ic%02Xisc%02Xip%02Xin%02X\n", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct), + le16_to_cpu(udev->descriptor.bcdDevice), + udev->descriptor.bDeviceClass, + udev->descriptor.bDeviceSubClass, + udev->descriptor.bDeviceProtocol, + alt->desc.bInterfaceClass, + alt->desc.bInterfaceSubClass, + alt->desc.bInterfaceProtocol, + alt->desc.bInterfaceNumber); +} +static DEVICE_ATTR_RO(modalias); + +static ssize_t supports_autosuspend_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int s; + + s = device_lock_interruptible(dev); + if (s < 0) + return -EINTR; + /* Devices will be autosuspended even when an interface isn't claimed */ + s = (!dev->driver || to_usb_driver(dev->driver)->supports_autosuspend); + device_unlock(dev); + + return sysfs_emit(buf, "%u\n", s); +} +static DEVICE_ATTR_RO(supports_autosuspend); + +/* + * interface_authorized_show - show authorization status of an USB interface + * 1 is authorized, 0 is deauthorized + */ +static ssize_t interface_authorized_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_interface *intf = to_usb_interface(dev); + + return sysfs_emit(buf, "%u\n", intf->authorized); +} + +/* + * interface_authorized_store - authorize or deauthorize an USB interface + */ +static ssize_t interface_authorized_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct usb_interface *intf = to_usb_interface(dev); + bool val; + + if (strtobool(buf, &val) != 0) + return -EINVAL; + + if (val) + usb_authorize_interface(intf); + else + usb_deauthorize_interface(intf); + + return count; +} +static struct device_attribute dev_attr_interface_authorized = + __ATTR(authorized, S_IRUGO | S_IWUSR, + interface_authorized_show, interface_authorized_store); + +static struct attribute *intf_attrs[] = { + &dev_attr_bInterfaceNumber.attr, + &dev_attr_bAlternateSetting.attr, + &dev_attr_bNumEndpoints.attr, + &dev_attr_bInterfaceClass.attr, + &dev_attr_bInterfaceSubClass.attr, + &dev_attr_bInterfaceProtocol.attr, + &dev_attr_modalias.attr, + &dev_attr_supports_autosuspend.attr, + &dev_attr_interface_authorized.attr, + NULL, +}; +static const struct attribute_group intf_attr_grp = { + .attrs = intf_attrs, +}; + +static struct attribute *intf_assoc_attrs[] = { + &dev_attr_iad_bFirstInterface.attr, + &dev_attr_iad_bInterfaceCount.attr, + &dev_attr_iad_bFunctionClass.attr, + &dev_attr_iad_bFunctionSubClass.attr, + &dev_attr_iad_bFunctionProtocol.attr, + NULL, +}; + +static umode_t intf_assoc_attrs_are_visible(struct kobject *kobj, + struct attribute *a, int n) +{ + struct device *dev = kobj_to_dev(kobj); + struct usb_interface *intf = to_usb_interface(dev); + + if (intf->intf_assoc == NULL) + return 0; + return a->mode; +} + +static const struct attribute_group intf_assoc_attr_grp = { + .attrs = intf_assoc_attrs, + .is_visible = intf_assoc_attrs_are_visible, +}; + +const struct attribute_group *usb_interface_groups[] = { + &intf_attr_grp, + &intf_assoc_attr_grp, + NULL +}; + +void usb_create_sysfs_intf_files(struct usb_interface *intf) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct usb_host_interface *alt = intf->cur_altsetting; + + if (intf->sysfs_files_created || intf->unregistering) + return; + + if (!alt->string && !(udev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS)) + alt->string = usb_cache_string(udev, alt->desc.iInterface); + if (alt->string && device_create_file(&intf->dev, &dev_attr_interface)) { + /* This is not a serious error */ + dev_dbg(&intf->dev, "interface string descriptor file not created\n"); + } + intf->sysfs_files_created = 1; +} + +void usb_remove_sysfs_intf_files(struct usb_interface *intf) +{ + if (!intf->sysfs_files_created) + return; + + device_remove_file(&intf->dev, &dev_attr_interface); + intf->sysfs_files_created = 0; +} diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c new file mode 100644 index 000000000..9f3c54032 --- /dev/null +++ b/drivers/usb/core/urb.c @@ -0,0 +1,1054 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Released under the GPLv2 only. + */ + +#include <linux/module.h> +#include <linux/string.h> +#include <linux/bitops.h> +#include <linux/slab.h> +#include <linux/log2.h> +#include <linux/kmsan.h> +#include <linux/usb.h> +#include <linux/wait.h> +#include <linux/usb/hcd.h> +#include <linux/scatterlist.h> + +#define to_urb(d) container_of(d, struct urb, kref) + + +static void urb_destroy(struct kref *kref) +{ + struct urb *urb = to_urb(kref); + + if (urb->transfer_flags & URB_FREE_BUFFER) + kfree(urb->transfer_buffer); + + kfree(urb); +} + +/** + * usb_init_urb - initializes a urb so that it can be used by a USB driver + * @urb: pointer to the urb to initialize + * + * Initializes a urb so that the USB subsystem can use it properly. + * + * If a urb is created with a call to usb_alloc_urb() it is not + * necessary to call this function. Only use this if you allocate the + * space for a struct urb on your own. If you call this function, be + * careful when freeing the memory for your urb that it is no longer in + * use by the USB core. + * + * Only use this function if you _really_ understand what you are doing. + */ +void usb_init_urb(struct urb *urb) +{ + if (urb) { + memset(urb, 0, sizeof(*urb)); + kref_init(&urb->kref); + INIT_LIST_HEAD(&urb->urb_list); + INIT_LIST_HEAD(&urb->anchor_list); + } +} +EXPORT_SYMBOL_GPL(usb_init_urb); + +/** + * usb_alloc_urb - creates a new urb for a USB driver to use + * @iso_packets: number of iso packets for this urb + * @mem_flags: the type of memory to allocate, see kmalloc() for a list of + * valid options for this. + * + * Creates an urb for the USB driver to use, initializes a few internal + * structures, increments the usage counter, and returns a pointer to it. + * + * If the driver want to use this urb for interrupt, control, or bulk + * endpoints, pass '0' as the number of iso packets. + * + * The driver must call usb_free_urb() when it is finished with the urb. + * + * Return: A pointer to the new urb, or %NULL if no memory is available. + */ +struct urb *usb_alloc_urb(int iso_packets, gfp_t mem_flags) +{ + struct urb *urb; + + urb = kmalloc(struct_size(urb, iso_frame_desc, iso_packets), + mem_flags); + if (!urb) + return NULL; + usb_init_urb(urb); + return urb; +} +EXPORT_SYMBOL_GPL(usb_alloc_urb); + +/** + * usb_free_urb - frees the memory used by a urb when all users of it are finished + * @urb: pointer to the urb to free, may be NULL + * + * Must be called when a user of a urb is finished with it. When the last user + * of the urb calls this function, the memory of the urb is freed. + * + * Note: The transfer buffer associated with the urb is not freed unless the + * URB_FREE_BUFFER transfer flag is set. + */ +void usb_free_urb(struct urb *urb) +{ + if (urb) + kref_put(&urb->kref, urb_destroy); +} +EXPORT_SYMBOL_GPL(usb_free_urb); + +/** + * usb_get_urb - increments the reference count of the urb + * @urb: pointer to the urb to modify, may be NULL + * + * This must be called whenever a urb is transferred from a device driver to a + * host controller driver. This allows proper reference counting to happen + * for urbs. + * + * Return: A pointer to the urb with the incremented reference counter. + */ +struct urb *usb_get_urb(struct urb *urb) +{ + if (urb) + kref_get(&urb->kref); + return urb; +} +EXPORT_SYMBOL_GPL(usb_get_urb); + +/** + * usb_anchor_urb - anchors an URB while it is processed + * @urb: pointer to the urb to anchor + * @anchor: pointer to the anchor + * + * This can be called to have access to URBs which are to be executed + * without bothering to track them + */ +void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor) +{ + unsigned long flags; + + spin_lock_irqsave(&anchor->lock, flags); + usb_get_urb(urb); + list_add_tail(&urb->anchor_list, &anchor->urb_list); + urb->anchor = anchor; + + if (unlikely(anchor->poisoned)) + atomic_inc(&urb->reject); + + spin_unlock_irqrestore(&anchor->lock, flags); +} +EXPORT_SYMBOL_GPL(usb_anchor_urb); + +static int usb_anchor_check_wakeup(struct usb_anchor *anchor) +{ + return atomic_read(&anchor->suspend_wakeups) == 0 && + list_empty(&anchor->urb_list); +} + +/* Callers must hold anchor->lock */ +static void __usb_unanchor_urb(struct urb *urb, struct usb_anchor *anchor) +{ + urb->anchor = NULL; + list_del(&urb->anchor_list); + usb_put_urb(urb); + if (usb_anchor_check_wakeup(anchor)) + wake_up(&anchor->wait); +} + +/** + * usb_unanchor_urb - unanchors an URB + * @urb: pointer to the urb to anchor + * + * Call this to stop the system keeping track of this URB + */ +void usb_unanchor_urb(struct urb *urb) +{ + unsigned long flags; + struct usb_anchor *anchor; + + if (!urb) + return; + + anchor = urb->anchor; + if (!anchor) + return; + + spin_lock_irqsave(&anchor->lock, flags); + /* + * At this point, we could be competing with another thread which + * has the same intention. To protect the urb from being unanchored + * twice, only the winner of the race gets the job. + */ + if (likely(anchor == urb->anchor)) + __usb_unanchor_urb(urb, anchor); + spin_unlock_irqrestore(&anchor->lock, flags); +} +EXPORT_SYMBOL_GPL(usb_unanchor_urb); + +/*-------------------------------------------------------------------*/ + +static const int pipetypes[4] = { + PIPE_CONTROL, PIPE_ISOCHRONOUS, PIPE_BULK, PIPE_INTERRUPT +}; + +/** + * usb_pipe_type_check - sanity check of a specific pipe for a usb device + * @dev: struct usb_device to be checked + * @pipe: pipe to check + * + * This performs a light-weight sanity check for the endpoint in the + * given usb device. It returns 0 if the pipe is valid for the specific usb + * device, otherwise a negative error code. + */ +int usb_pipe_type_check(struct usb_device *dev, unsigned int pipe) +{ + const struct usb_host_endpoint *ep; + + ep = usb_pipe_endpoint(dev, pipe); + if (!ep) + return -EINVAL; + if (usb_pipetype(pipe) != pipetypes[usb_endpoint_type(&ep->desc)]) + return -EINVAL; + return 0; +} +EXPORT_SYMBOL_GPL(usb_pipe_type_check); + +/** + * usb_urb_ep_type_check - sanity check of endpoint in the given urb + * @urb: urb to be checked + * + * This performs a light-weight sanity check for the endpoint in the + * given urb. It returns 0 if the urb contains a valid endpoint, otherwise + * a negative error code. + */ +int usb_urb_ep_type_check(const struct urb *urb) +{ + return usb_pipe_type_check(urb->dev, urb->pipe); +} +EXPORT_SYMBOL_GPL(usb_urb_ep_type_check); + +/** + * usb_submit_urb - issue an asynchronous transfer request for an endpoint + * @urb: pointer to the urb describing the request + * @mem_flags: the type of memory to allocate, see kmalloc() for a list + * of valid options for this. + * + * This submits a transfer request, and transfers control of the URB + * describing that request to the USB subsystem. Request completion will + * be indicated later, asynchronously, by calling the completion handler. + * The three types of completion are success, error, and unlink + * (a software-induced fault, also called "request cancellation"). + * + * URBs may be submitted in interrupt context. + * + * The caller must have correctly initialized the URB before submitting + * it. Functions such as usb_fill_bulk_urb() and usb_fill_control_urb() are + * available to ensure that most fields are correctly initialized, for + * the particular kind of transfer, although they will not initialize + * any transfer flags. + * + * If the submission is successful, the complete() callback from the URB + * will be called exactly once, when the USB core and Host Controller Driver + * (HCD) are finished with the URB. When the completion function is called, + * control of the URB is returned to the device driver which issued the + * request. The completion handler may then immediately free or reuse that + * URB. + * + * With few exceptions, USB device drivers should never access URB fields + * provided by usbcore or the HCD until its complete() is called. + * The exceptions relate to periodic transfer scheduling. For both + * interrupt and isochronous urbs, as part of successful URB submission + * urb->interval is modified to reflect the actual transfer period used + * (normally some power of two units). And for isochronous urbs, + * urb->start_frame is modified to reflect when the URB's transfers were + * scheduled to start. + * + * Not all isochronous transfer scheduling policies will work, but most + * host controller drivers should easily handle ISO queues going from now + * until 10-200 msec into the future. Drivers should try to keep at + * least one or two msec of data in the queue; many controllers require + * that new transfers start at least 1 msec in the future when they are + * added. If the driver is unable to keep up and the queue empties out, + * the behavior for new submissions is governed by the URB_ISO_ASAP flag. + * If the flag is set, or if the queue is idle, then the URB is always + * assigned to the first available (and not yet expired) slot in the + * endpoint's schedule. If the flag is not set and the queue is active + * then the URB is always assigned to the next slot in the schedule + * following the end of the endpoint's previous URB, even if that slot is + * in the past. When a packet is assigned in this way to a slot that has + * already expired, the packet is not transmitted and the corresponding + * usb_iso_packet_descriptor's status field will return -EXDEV. If this + * would happen to all the packets in the URB, submission fails with a + * -EXDEV error code. + * + * For control endpoints, the synchronous usb_control_msg() call is + * often used (in non-interrupt context) instead of this call. + * That is often used through convenience wrappers, for the requests + * that are standardized in the USB 2.0 specification. For bulk + * endpoints, a synchronous usb_bulk_msg() call is available. + * + * Return: + * 0 on successful submissions. A negative error number otherwise. + * + * Request Queuing: + * + * URBs may be submitted to endpoints before previous ones complete, to + * minimize the impact of interrupt latencies and system overhead on data + * throughput. With that queuing policy, an endpoint's queue would never + * be empty. This is required for continuous isochronous data streams, + * and may also be required for some kinds of interrupt transfers. Such + * queuing also maximizes bandwidth utilization by letting USB controllers + * start work on later requests before driver software has finished the + * completion processing for earlier (successful) requests. + * + * As of Linux 2.6, all USB endpoint transfer queues support depths greater + * than one. This was previously a HCD-specific behavior, except for ISO + * transfers. Non-isochronous endpoint queues are inactive during cleanup + * after faults (transfer errors or cancellation). + * + * Reserved Bandwidth Transfers: + * + * Periodic transfers (interrupt or isochronous) are performed repeatedly, + * using the interval specified in the urb. Submitting the first urb to + * the endpoint reserves the bandwidth necessary to make those transfers. + * If the USB subsystem can't allocate sufficient bandwidth to perform + * the periodic request, submitting such a periodic request should fail. + * + * For devices under xHCI, the bandwidth is reserved at configuration time, or + * when the alt setting is selected. If there is not enough bus bandwidth, the + * configuration/alt setting request will fail. Therefore, submissions to + * periodic endpoints on devices under xHCI should never fail due to bandwidth + * constraints. + * + * Device drivers must explicitly request that repetition, by ensuring that + * some URB is always on the endpoint's queue (except possibly for short + * periods during completion callbacks). When there is no longer an urb + * queued, the endpoint's bandwidth reservation is canceled. This means + * drivers can use their completion handlers to ensure they keep bandwidth + * they need, by reinitializing and resubmitting the just-completed urb + * until the driver longer needs that periodic bandwidth. + * + * Memory Flags: + * + * The general rules for how to decide which mem_flags to use + * are the same as for kmalloc. There are four + * different possible values; GFP_KERNEL, GFP_NOFS, GFP_NOIO and + * GFP_ATOMIC. + * + * GFP_NOFS is not ever used, as it has not been implemented yet. + * + * GFP_ATOMIC is used when + * (a) you are inside a completion handler, an interrupt, bottom half, + * tasklet or timer, or + * (b) you are holding a spinlock or rwlock (does not apply to + * semaphores), or + * (c) current->state != TASK_RUNNING, this is the case only after + * you've changed it. + * + * GFP_NOIO is used in the block io path and error handling of storage + * devices. + * + * All other situations use GFP_KERNEL. + * + * Some more specific rules for mem_flags can be inferred, such as + * (1) start_xmit, timeout, and receive methods of network drivers must + * use GFP_ATOMIC (they are called with a spinlock held); + * (2) queuecommand methods of scsi drivers must use GFP_ATOMIC (also + * called with a spinlock held); + * (3) If you use a kernel thread with a network driver you must use + * GFP_NOIO, unless (b) or (c) apply; + * (4) after you have done a down() you can use GFP_KERNEL, unless (b) or (c) + * apply or your are in a storage driver's block io path; + * (5) USB probe and disconnect can use GFP_KERNEL unless (b) or (c) apply; and + * (6) changing firmware on a running storage or net device uses + * GFP_NOIO, unless b) or c) apply + * + */ +int usb_submit_urb(struct urb *urb, gfp_t mem_flags) +{ + int xfertype, max; + struct usb_device *dev; + struct usb_host_endpoint *ep; + int is_out; + unsigned int allowed; + + if (!urb || !urb->complete) + return -EINVAL; + if (urb->hcpriv) { + WARN_ONCE(1, "URB %pK submitted while active\n", urb); + return -EBUSY; + } + + dev = urb->dev; + if ((!dev) || (dev->state < USB_STATE_UNAUTHENTICATED)) + return -ENODEV; + + /* For now, get the endpoint from the pipe. Eventually drivers + * will be required to set urb->ep directly and we will eliminate + * urb->pipe. + */ + ep = usb_pipe_endpoint(dev, urb->pipe); + if (!ep) + return -ENOENT; + + urb->ep = ep; + urb->status = -EINPROGRESS; + urb->actual_length = 0; + + /* Lots of sanity checks, so HCDs can rely on clean data + * and don't need to duplicate tests + */ + xfertype = usb_endpoint_type(&ep->desc); + if (xfertype == USB_ENDPOINT_XFER_CONTROL) { + struct usb_ctrlrequest *setup = + (struct usb_ctrlrequest *) urb->setup_packet; + + if (!setup) + return -ENOEXEC; + is_out = !(setup->bRequestType & USB_DIR_IN) || + !setup->wLength; + dev_WARN_ONCE(&dev->dev, (usb_pipeout(urb->pipe) != is_out), + "BOGUS control dir, pipe %x doesn't match bRequestType %x\n", + urb->pipe, setup->bRequestType); + if (le16_to_cpu(setup->wLength) != urb->transfer_buffer_length) { + dev_dbg(&dev->dev, "BOGUS control len %d doesn't match transfer length %d\n", + le16_to_cpu(setup->wLength), + urb->transfer_buffer_length); + return -EBADR; + } + } else { + is_out = usb_endpoint_dir_out(&ep->desc); + } + + /* Clear the internal flags and cache the direction for later use */ + urb->transfer_flags &= ~(URB_DIR_MASK | URB_DMA_MAP_SINGLE | + URB_DMA_MAP_PAGE | URB_DMA_MAP_SG | URB_MAP_LOCAL | + URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL | + URB_DMA_SG_COMBINED); + urb->transfer_flags |= (is_out ? URB_DIR_OUT : URB_DIR_IN); + kmsan_handle_urb(urb, is_out); + + if (xfertype != USB_ENDPOINT_XFER_CONTROL && + dev->state < USB_STATE_CONFIGURED) + return -ENODEV; + + max = usb_endpoint_maxp(&ep->desc); + if (max <= 0) { + dev_dbg(&dev->dev, + "bogus endpoint ep%d%s in %s (bad maxpacket %d)\n", + usb_endpoint_num(&ep->desc), is_out ? "out" : "in", + __func__, max); + return -EMSGSIZE; + } + + /* periodic transfers limit size per frame/uframe, + * but drivers only control those sizes for ISO. + * while we're checking, initialize return status. + */ + if (xfertype == USB_ENDPOINT_XFER_ISOC) { + int n, len; + + /* SuperSpeed isoc endpoints have up to 16 bursts of up to + * 3 packets each + */ + if (dev->speed >= USB_SPEED_SUPER) { + int burst = 1 + ep->ss_ep_comp.bMaxBurst; + int mult = USB_SS_MULT(ep->ss_ep_comp.bmAttributes); + max *= burst; + max *= mult; + } + + if (dev->speed == USB_SPEED_SUPER_PLUS && + USB_SS_SSP_ISOC_COMP(ep->ss_ep_comp.bmAttributes)) { + struct usb_ssp_isoc_ep_comp_descriptor *isoc_ep_comp; + + isoc_ep_comp = &ep->ssp_isoc_ep_comp; + max = le32_to_cpu(isoc_ep_comp->dwBytesPerInterval); + } + + /* "high bandwidth" mode, 1-3 packets/uframe? */ + if (dev->speed == USB_SPEED_HIGH) + max *= usb_endpoint_maxp_mult(&ep->desc); + + if (urb->number_of_packets <= 0) + return -EINVAL; + for (n = 0; n < urb->number_of_packets; n++) { + len = urb->iso_frame_desc[n].length; + if (len < 0 || len > max) + return -EMSGSIZE; + urb->iso_frame_desc[n].status = -EXDEV; + urb->iso_frame_desc[n].actual_length = 0; + } + } else if (urb->num_sgs && !urb->dev->bus->no_sg_constraint && + dev->speed != USB_SPEED_WIRELESS) { + struct scatterlist *sg; + int i; + + for_each_sg(urb->sg, sg, urb->num_sgs - 1, i) + if (sg->length % max) + return -EINVAL; + } + + /* the I/O buffer must be mapped/unmapped, except when length=0 */ + if (urb->transfer_buffer_length > INT_MAX) + return -EMSGSIZE; + + /* + * stuff that drivers shouldn't do, but which shouldn't + * cause problems in HCDs if they get it wrong. + */ + + /* Check that the pipe's type matches the endpoint's type */ + if (usb_pipe_type_check(urb->dev, urb->pipe)) + dev_WARN(&dev->dev, "BOGUS urb xfer, pipe %x != type %x\n", + usb_pipetype(urb->pipe), pipetypes[xfertype]); + + /* Check against a simple/standard policy */ + allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT | URB_DIR_MASK | + URB_FREE_BUFFER); + switch (xfertype) { + case USB_ENDPOINT_XFER_BULK: + case USB_ENDPOINT_XFER_INT: + if (is_out) + allowed |= URB_ZERO_PACKET; + fallthrough; + default: /* all non-iso endpoints */ + if (!is_out) + allowed |= URB_SHORT_NOT_OK; + break; + case USB_ENDPOINT_XFER_ISOC: + allowed |= URB_ISO_ASAP; + break; + } + allowed &= urb->transfer_flags; + + /* warn if submitter gave bogus flags */ + if (allowed != urb->transfer_flags) + dev_WARN(&dev->dev, "BOGUS urb flags, %x --> %x\n", + urb->transfer_flags, allowed); + + /* + * Force periodic transfer intervals to be legal values that are + * a power of two (so HCDs don't need to). + * + * FIXME want bus->{intr,iso}_sched_horizon values here. Each HC + * supports different values... this uses EHCI/UHCI defaults (and + * EHCI can use smaller non-default values). + */ + switch (xfertype) { + case USB_ENDPOINT_XFER_ISOC: + case USB_ENDPOINT_XFER_INT: + /* too small? */ + switch (dev->speed) { + case USB_SPEED_WIRELESS: + if ((urb->interval < 6) + && (xfertype == USB_ENDPOINT_XFER_INT)) + return -EINVAL; + fallthrough; + default: + if (urb->interval <= 0) + return -EINVAL; + break; + } + /* too big? */ + switch (dev->speed) { + case USB_SPEED_SUPER_PLUS: + case USB_SPEED_SUPER: /* units are 125us */ + /* Handle up to 2^(16-1) microframes */ + if (urb->interval > (1 << 15)) + return -EINVAL; + max = 1 << 15; + break; + case USB_SPEED_WIRELESS: + if (urb->interval > 16) + return -EINVAL; + break; + case USB_SPEED_HIGH: /* units are microframes */ + /* NOTE usb handles 2^15 */ + if (urb->interval > (1024 * 8)) + urb->interval = 1024 * 8; + max = 1024 * 8; + break; + case USB_SPEED_FULL: /* units are frames/msec */ + case USB_SPEED_LOW: + if (xfertype == USB_ENDPOINT_XFER_INT) { + if (urb->interval > 255) + return -EINVAL; + /* NOTE ohci only handles up to 32 */ + max = 128; + } else { + if (urb->interval > 1024) + urb->interval = 1024; + /* NOTE usb and ohci handle up to 2^15 */ + max = 1024; + } + break; + default: + return -EINVAL; + } + if (dev->speed != USB_SPEED_WIRELESS) { + /* Round down to a power of 2, no more than max */ + urb->interval = min(max, 1 << ilog2(urb->interval)); + } + } + + return usb_hcd_submit_urb(urb, mem_flags); +} +EXPORT_SYMBOL_GPL(usb_submit_urb); + +/*-------------------------------------------------------------------*/ + +/** + * usb_unlink_urb - abort/cancel a transfer request for an endpoint + * @urb: pointer to urb describing a previously submitted request, + * may be NULL + * + * This routine cancels an in-progress request. URBs complete only once + * per submission, and may be canceled only once per submission. + * Successful cancellation means termination of @urb will be expedited + * and the completion handler will be called with a status code + * indicating that the request has been canceled (rather than any other + * code). + * + * Drivers should not call this routine or related routines, such as + * usb_kill_urb() or usb_unlink_anchored_urbs(), after their disconnect + * method has returned. The disconnect function should synchronize with + * a driver's I/O routines to insure that all URB-related activity has + * completed before it returns. + * + * This request is asynchronous, however the HCD might call the ->complete() + * callback during unlink. Therefore when drivers call usb_unlink_urb(), they + * must not hold any locks that may be taken by the completion function. + * Success is indicated by returning -EINPROGRESS, at which time the URB will + * probably not yet have been given back to the device driver. When it is + * eventually called, the completion function will see @urb->status == + * -ECONNRESET. + * Failure is indicated by usb_unlink_urb() returning any other value. + * Unlinking will fail when @urb is not currently "linked" (i.e., it was + * never submitted, or it was unlinked before, or the hardware is already + * finished with it), even if the completion handler has not yet run. + * + * The URB must not be deallocated while this routine is running. In + * particular, when a driver calls this routine, it must insure that the + * completion handler cannot deallocate the URB. + * + * Return: -EINPROGRESS on success. See description for other values on + * failure. + * + * Unlinking and Endpoint Queues: + * + * [The behaviors and guarantees described below do not apply to virtual + * root hubs but only to endpoint queues for physical USB devices.] + * + * Host Controller Drivers (HCDs) place all the URBs for a particular + * endpoint in a queue. Normally the queue advances as the controller + * hardware processes each request. But when an URB terminates with an + * error its queue generally stops (see below), at least until that URB's + * completion routine returns. It is guaranteed that a stopped queue + * will not restart until all its unlinked URBs have been fully retired, + * with their completion routines run, even if that's not until some time + * after the original completion handler returns. The same behavior and + * guarantee apply when an URB terminates because it was unlinked. + * + * Bulk and interrupt endpoint queues are guaranteed to stop whenever an + * URB terminates with any sort of error, including -ECONNRESET, -ENOENT, + * and -EREMOTEIO. Control endpoint queues behave the same way except + * that they are not guaranteed to stop for -EREMOTEIO errors. Queues + * for isochronous endpoints are treated differently, because they must + * advance at fixed rates. Such queues do not stop when an URB + * encounters an error or is unlinked. An unlinked isochronous URB may + * leave a gap in the stream of packets; it is undefined whether such + * gaps can be filled in. + * + * Note that early termination of an URB because a short packet was + * received will generate a -EREMOTEIO error if and only if the + * URB_SHORT_NOT_OK flag is set. By setting this flag, USB device + * drivers can build deep queues for large or complex bulk transfers + * and clean them up reliably after any sort of aborted transfer by + * unlinking all pending URBs at the first fault. + * + * When a control URB terminates with an error other than -EREMOTEIO, it + * is quite likely that the status stage of the transfer will not take + * place. + */ +int usb_unlink_urb(struct urb *urb) +{ + if (!urb) + return -EINVAL; + if (!urb->dev) + return -ENODEV; + if (!urb->ep) + return -EIDRM; + return usb_hcd_unlink_urb(urb, -ECONNRESET); +} +EXPORT_SYMBOL_GPL(usb_unlink_urb); + +/** + * usb_kill_urb - cancel a transfer request and wait for it to finish + * @urb: pointer to URB describing a previously submitted request, + * may be NULL + * + * This routine cancels an in-progress request. It is guaranteed that + * upon return all completion handlers will have finished and the URB + * will be totally idle and available for reuse. These features make + * this an ideal way to stop I/O in a disconnect() callback or close() + * function. If the request has not already finished or been unlinked + * the completion handler will see urb->status == -ENOENT. + * + * While the routine is running, attempts to resubmit the URB will fail + * with error -EPERM. Thus even if the URB's completion handler always + * tries to resubmit, it will not succeed and the URB will become idle. + * + * The URB must not be deallocated while this routine is running. In + * particular, when a driver calls this routine, it must insure that the + * completion handler cannot deallocate the URB. + * + * This routine may not be used in an interrupt context (such as a bottom + * half or a completion handler), or when holding a spinlock, or in other + * situations where the caller can't schedule(). + * + * This routine should not be called by a driver after its disconnect + * method has returned. + */ +void usb_kill_urb(struct urb *urb) +{ + might_sleep(); + if (!(urb && urb->dev && urb->ep)) + return; + atomic_inc(&urb->reject); + /* + * Order the write of urb->reject above before the read + * of urb->use_count below. Pairs with the barriers in + * __usb_hcd_giveback_urb() and usb_hcd_submit_urb(). + */ + smp_mb__after_atomic(); + + usb_hcd_unlink_urb(urb, -ENOENT); + wait_event(usb_kill_urb_queue, atomic_read(&urb->use_count) == 0); + + atomic_dec(&urb->reject); +} +EXPORT_SYMBOL_GPL(usb_kill_urb); + +/** + * usb_poison_urb - reliably kill a transfer and prevent further use of an URB + * @urb: pointer to URB describing a previously submitted request, + * may be NULL + * + * This routine cancels an in-progress request. It is guaranteed that + * upon return all completion handlers will have finished and the URB + * will be totally idle and cannot be reused. These features make + * this an ideal way to stop I/O in a disconnect() callback. + * If the request has not already finished or been unlinked + * the completion handler will see urb->status == -ENOENT. + * + * After and while the routine runs, attempts to resubmit the URB will fail + * with error -EPERM. Thus even if the URB's completion handler always + * tries to resubmit, it will not succeed and the URB will become idle. + * + * The URB must not be deallocated while this routine is running. In + * particular, when a driver calls this routine, it must insure that the + * completion handler cannot deallocate the URB. + * + * This routine may not be used in an interrupt context (such as a bottom + * half or a completion handler), or when holding a spinlock, or in other + * situations where the caller can't schedule(). + * + * This routine should not be called by a driver after its disconnect + * method has returned. + */ +void usb_poison_urb(struct urb *urb) +{ + might_sleep(); + if (!urb) + return; + atomic_inc(&urb->reject); + /* + * Order the write of urb->reject above before the read + * of urb->use_count below. Pairs with the barriers in + * __usb_hcd_giveback_urb() and usb_hcd_submit_urb(). + */ + smp_mb__after_atomic(); + + if (!urb->dev || !urb->ep) + return; + + usb_hcd_unlink_urb(urb, -ENOENT); + wait_event(usb_kill_urb_queue, atomic_read(&urb->use_count) == 0); +} +EXPORT_SYMBOL_GPL(usb_poison_urb); + +void usb_unpoison_urb(struct urb *urb) +{ + if (!urb) + return; + + atomic_dec(&urb->reject); +} +EXPORT_SYMBOL_GPL(usb_unpoison_urb); + +/** + * usb_block_urb - reliably prevent further use of an URB + * @urb: pointer to URB to be blocked, may be NULL + * + * After the routine has run, attempts to resubmit the URB will fail + * with error -EPERM. Thus even if the URB's completion handler always + * tries to resubmit, it will not succeed and the URB will become idle. + * + * The URB must not be deallocated while this routine is running. In + * particular, when a driver calls this routine, it must insure that the + * completion handler cannot deallocate the URB. + */ +void usb_block_urb(struct urb *urb) +{ + if (!urb) + return; + + atomic_inc(&urb->reject); +} +EXPORT_SYMBOL_GPL(usb_block_urb); + +/** + * usb_kill_anchored_urbs - kill all URBs associated with an anchor + * @anchor: anchor the requests are bound to + * + * This kills all outstanding URBs starting from the back of the queue, + * with guarantee that no completer callbacks will take place from the + * anchor after this function returns. + * + * This routine should not be called by a driver after its disconnect + * method has returned. + */ +void usb_kill_anchored_urbs(struct usb_anchor *anchor) +{ + struct urb *victim; + int surely_empty; + + do { + spin_lock_irq(&anchor->lock); + while (!list_empty(&anchor->urb_list)) { + victim = list_entry(anchor->urb_list.prev, + struct urb, anchor_list); + /* make sure the URB isn't freed before we kill it */ + usb_get_urb(victim); + spin_unlock_irq(&anchor->lock); + /* this will unanchor the URB */ + usb_kill_urb(victim); + usb_put_urb(victim); + spin_lock_irq(&anchor->lock); + } + surely_empty = usb_anchor_check_wakeup(anchor); + + spin_unlock_irq(&anchor->lock); + cpu_relax(); + } while (!surely_empty); +} +EXPORT_SYMBOL_GPL(usb_kill_anchored_urbs); + + +/** + * usb_poison_anchored_urbs - cease all traffic from an anchor + * @anchor: anchor the requests are bound to + * + * this allows all outstanding URBs to be poisoned starting + * from the back of the queue. Newly added URBs will also be + * poisoned + * + * This routine should not be called by a driver after its disconnect + * method has returned. + */ +void usb_poison_anchored_urbs(struct usb_anchor *anchor) +{ + struct urb *victim; + int surely_empty; + + do { + spin_lock_irq(&anchor->lock); + anchor->poisoned = 1; + while (!list_empty(&anchor->urb_list)) { + victim = list_entry(anchor->urb_list.prev, + struct urb, anchor_list); + /* make sure the URB isn't freed before we kill it */ + usb_get_urb(victim); + spin_unlock_irq(&anchor->lock); + /* this will unanchor the URB */ + usb_poison_urb(victim); + usb_put_urb(victim); + spin_lock_irq(&anchor->lock); + } + surely_empty = usb_anchor_check_wakeup(anchor); + + spin_unlock_irq(&anchor->lock); + cpu_relax(); + } while (!surely_empty); +} +EXPORT_SYMBOL_GPL(usb_poison_anchored_urbs); + +/** + * usb_unpoison_anchored_urbs - let an anchor be used successfully again + * @anchor: anchor the requests are bound to + * + * Reverses the effect of usb_poison_anchored_urbs + * the anchor can be used normally after it returns + */ +void usb_unpoison_anchored_urbs(struct usb_anchor *anchor) +{ + unsigned long flags; + struct urb *lazarus; + + spin_lock_irqsave(&anchor->lock, flags); + list_for_each_entry(lazarus, &anchor->urb_list, anchor_list) { + usb_unpoison_urb(lazarus); + } + anchor->poisoned = 0; + spin_unlock_irqrestore(&anchor->lock, flags); +} +EXPORT_SYMBOL_GPL(usb_unpoison_anchored_urbs); +/** + * usb_unlink_anchored_urbs - asynchronously cancel transfer requests en masse + * @anchor: anchor the requests are bound to + * + * this allows all outstanding URBs to be unlinked starting + * from the back of the queue. This function is asynchronous. + * The unlinking is just triggered. It may happen after this + * function has returned. + * + * This routine should not be called by a driver after its disconnect + * method has returned. + */ +void usb_unlink_anchored_urbs(struct usb_anchor *anchor) +{ + struct urb *victim; + + while ((victim = usb_get_from_anchor(anchor)) != NULL) { + usb_unlink_urb(victim); + usb_put_urb(victim); + } +} +EXPORT_SYMBOL_GPL(usb_unlink_anchored_urbs); + +/** + * usb_anchor_suspend_wakeups + * @anchor: the anchor you want to suspend wakeups on + * + * Call this to stop the last urb being unanchored from waking up any + * usb_wait_anchor_empty_timeout waiters. This is used in the hcd urb give- + * back path to delay waking up until after the completion handler has run. + */ +void usb_anchor_suspend_wakeups(struct usb_anchor *anchor) +{ + if (anchor) + atomic_inc(&anchor->suspend_wakeups); +} +EXPORT_SYMBOL_GPL(usb_anchor_suspend_wakeups); + +/** + * usb_anchor_resume_wakeups + * @anchor: the anchor you want to resume wakeups on + * + * Allow usb_wait_anchor_empty_timeout waiters to be woken up again, and + * wake up any current waiters if the anchor is empty. + */ +void usb_anchor_resume_wakeups(struct usb_anchor *anchor) +{ + if (!anchor) + return; + + atomic_dec(&anchor->suspend_wakeups); + if (usb_anchor_check_wakeup(anchor)) + wake_up(&anchor->wait); +} +EXPORT_SYMBOL_GPL(usb_anchor_resume_wakeups); + +/** + * usb_wait_anchor_empty_timeout - wait for an anchor to be unused + * @anchor: the anchor you want to become unused + * @timeout: how long you are willing to wait in milliseconds + * + * Call this is you want to be sure all an anchor's + * URBs have finished + * + * Return: Non-zero if the anchor became unused. Zero on timeout. + */ +int usb_wait_anchor_empty_timeout(struct usb_anchor *anchor, + unsigned int timeout) +{ + return wait_event_timeout(anchor->wait, + usb_anchor_check_wakeup(anchor), + msecs_to_jiffies(timeout)); +} +EXPORT_SYMBOL_GPL(usb_wait_anchor_empty_timeout); + +/** + * usb_get_from_anchor - get an anchor's oldest urb + * @anchor: the anchor whose urb you want + * + * This will take the oldest urb from an anchor, + * unanchor and return it + * + * Return: The oldest urb from @anchor, or %NULL if @anchor has no + * urbs associated with it. + */ +struct urb *usb_get_from_anchor(struct usb_anchor *anchor) +{ + struct urb *victim; + unsigned long flags; + + spin_lock_irqsave(&anchor->lock, flags); + if (!list_empty(&anchor->urb_list)) { + victim = list_entry(anchor->urb_list.next, struct urb, + anchor_list); + usb_get_urb(victim); + __usb_unanchor_urb(victim, anchor); + } else { + victim = NULL; + } + spin_unlock_irqrestore(&anchor->lock, flags); + + return victim; +} + +EXPORT_SYMBOL_GPL(usb_get_from_anchor); + +/** + * usb_scuttle_anchored_urbs - unanchor all an anchor's urbs + * @anchor: the anchor whose urbs you want to unanchor + * + * use this to get rid of all an anchor's urbs + */ +void usb_scuttle_anchored_urbs(struct usb_anchor *anchor) +{ + struct urb *victim; + unsigned long flags; + int surely_empty; + + do { + spin_lock_irqsave(&anchor->lock, flags); + while (!list_empty(&anchor->urb_list)) { + victim = list_entry(anchor->urb_list.prev, + struct urb, anchor_list); + __usb_unanchor_urb(victim, anchor); + } + surely_empty = usb_anchor_check_wakeup(anchor); + + spin_unlock_irqrestore(&anchor->lock, flags); + cpu_relax(); + } while (!surely_empty); +} + +EXPORT_SYMBOL_GPL(usb_scuttle_anchored_urbs); + +/** + * usb_anchor_empty - is an anchor empty + * @anchor: the anchor you want to query + * + * Return: 1 if the anchor has no urbs associated with it. + */ +int usb_anchor_empty(struct usb_anchor *anchor) +{ + return list_empty(&anchor->urb_list); +} + +EXPORT_SYMBOL_GPL(usb_anchor_empty); + diff --git a/drivers/usb/core/usb-acpi.c b/drivers/usb/core/usb-acpi.c new file mode 100644 index 000000000..533baa850 --- /dev/null +++ b/drivers/usb/core/usb-acpi.c @@ -0,0 +1,334 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * USB-ACPI glue code + * + * Copyright 2012 Red Hat <mjg@redhat.com> + */ +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/acpi.h> +#include <linux/pci.h> +#include <linux/usb/hcd.h> + +#include "hub.h" + +/** + * usb_acpi_power_manageable - check whether usb port has + * acpi power resource. + * @hdev: USB device belonging to the usb hub + * @index: port index based zero + * + * Return true if the port has acpi power resource and false if no. + */ +bool usb_acpi_power_manageable(struct usb_device *hdev, int index) +{ + acpi_handle port_handle; + int port1 = index + 1; + + port_handle = usb_get_hub_port_acpi_handle(hdev, + port1); + if (port_handle) + return acpi_bus_power_manageable(port_handle); + else + return false; +} +EXPORT_SYMBOL_GPL(usb_acpi_power_manageable); + +#define UUID_USB_CONTROLLER_DSM "ce2ee385-00e6-48cb-9f05-2edb927c4899" +#define USB_DSM_DISABLE_U1_U2_FOR_PORT 5 + +/** + * usb_acpi_port_lpm_incapable - check if lpm should be disabled for a port. + * @hdev: USB device belonging to the usb hub + * @index: zero based port index + * + * Some USB3 ports may not support USB3 link power management U1/U2 states + * due to different retimer setup. ACPI provides _DSM method which returns 0x01 + * if U1 and U2 states should be disabled. Evaluate _DSM with: + * Arg0: UUID = ce2ee385-00e6-48cb-9f05-2edb927c4899 + * Arg1: Revision ID = 0 + * Arg2: Function Index = 5 + * Arg3: (empty) + * + * Return 1 if USB3 port is LPM incapable, negative on error, otherwise 0 + */ + +int usb_acpi_port_lpm_incapable(struct usb_device *hdev, int index) +{ + union acpi_object *obj; + acpi_handle port_handle; + int port1 = index + 1; + guid_t guid; + int ret; + + ret = guid_parse(UUID_USB_CONTROLLER_DSM, &guid); + if (ret) + return ret; + + port_handle = usb_get_hub_port_acpi_handle(hdev, port1); + if (!port_handle) { + dev_dbg(&hdev->dev, "port-%d no acpi handle\n", port1); + return -ENODEV; + } + + if (!acpi_check_dsm(port_handle, &guid, 0, + BIT(USB_DSM_DISABLE_U1_U2_FOR_PORT))) { + dev_dbg(&hdev->dev, "port-%d no _DSM function %d\n", + port1, USB_DSM_DISABLE_U1_U2_FOR_PORT); + return -ENODEV; + } + + obj = acpi_evaluate_dsm(port_handle, &guid, 0, + USB_DSM_DISABLE_U1_U2_FOR_PORT, NULL); + + if (!obj) + return -ENODEV; + + if (obj->type != ACPI_TYPE_INTEGER) { + dev_dbg(&hdev->dev, "evaluate port-%d _DSM failed\n", port1); + ACPI_FREE(obj); + return -EINVAL; + } + + if (obj->integer.value == 0x01) + ret = 1; + + ACPI_FREE(obj); + + return ret; +} +EXPORT_SYMBOL_GPL(usb_acpi_port_lpm_incapable); + +/** + * usb_acpi_set_power_state - control usb port's power via acpi power + * resource + * @hdev: USB device belonging to the usb hub + * @index: port index based zero + * @enable: power state expected to be set + * + * Notice to use usb_acpi_power_manageable() to check whether the usb port + * has acpi power resource before invoking this function. + * + * Returns 0 on success, else negative errno. + */ +int usb_acpi_set_power_state(struct usb_device *hdev, int index, bool enable) +{ + struct usb_hub *hub = usb_hub_to_struct_hub(hdev); + struct usb_port *port_dev; + acpi_handle port_handle; + unsigned char state; + int port1 = index + 1; + int error = -EINVAL; + + if (!hub) + return -ENODEV; + port_dev = hub->ports[port1 - 1]; + + port_handle = (acpi_handle) usb_get_hub_port_acpi_handle(hdev, port1); + if (!port_handle) + return error; + + if (enable) + state = ACPI_STATE_D0; + else + state = ACPI_STATE_D3_COLD; + + error = acpi_bus_set_power(port_handle, state); + if (!error) + dev_dbg(&port_dev->dev, "acpi: power was set to %d\n", enable); + else + dev_dbg(&port_dev->dev, "acpi: power failed to be set\n"); + + return error; +} +EXPORT_SYMBOL_GPL(usb_acpi_set_power_state); + +static enum usb_port_connect_type usb_acpi_get_connect_type(acpi_handle handle, + struct acpi_pld_info *pld) +{ + enum usb_port_connect_type connect_type = USB_PORT_CONNECT_TYPE_UNKNOWN; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *upc = NULL; + acpi_status status; + + /* + * According to 9.14 in ACPI Spec 6.2. _PLD indicates whether usb port + * is user visible and _UPC indicates whether it is connectable. If + * the port was visible and connectable, it could be freely connected + * and disconnected with USB devices. If no visible and connectable, + * a usb device is directly hard-wired to the port. If no visible and + * no connectable, the port would be not used. + */ + status = acpi_evaluate_object(handle, "_UPC", NULL, &buffer); + if (ACPI_FAILURE(status)) + goto out; + + upc = buffer.pointer; + if (!upc || (upc->type != ACPI_TYPE_PACKAGE) || upc->package.count != 4) + goto out; + + if (upc->package.elements[0].integer.value) + if (pld->user_visible) + connect_type = USB_PORT_CONNECT_TYPE_HOT_PLUG; + else + connect_type = USB_PORT_CONNECT_TYPE_HARD_WIRED; + else if (!pld->user_visible) + connect_type = USB_PORT_NOT_USED; +out: + kfree(upc); + return connect_type; +} + + +/* + * Private to usb-acpi, all the core needs to know is that + * port_dev->location is non-zero when it has been set by the firmware. + */ +#define USB_ACPI_LOCATION_VALID (1 << 31) + +static struct acpi_device * +usb_acpi_get_companion_for_port(struct usb_port *port_dev) +{ + struct usb_device *udev; + struct acpi_device *adev; + acpi_handle *parent_handle; + int port1; + + /* Get the struct usb_device point of port's hub */ + udev = to_usb_device(port_dev->dev.parent->parent); + + /* + * The root hub ports' parent is the root hub. The non-root-hub + * ports' parent is the parent hub port which the hub is + * connected to. + */ + if (!udev->parent) { + adev = ACPI_COMPANION(&udev->dev); + port1 = usb_hcd_find_raw_port_number(bus_to_hcd(udev->bus), + port_dev->portnum); + } else { + parent_handle = usb_get_hub_port_acpi_handle(udev->parent, + udev->portnum); + if (!parent_handle) + return NULL; + + adev = acpi_fetch_acpi_dev(parent_handle); + port1 = port_dev->portnum; + } + + return acpi_find_child_by_adr(adev, port1); +} + +static struct acpi_device * +usb_acpi_find_companion_for_port(struct usb_port *port_dev) +{ + struct acpi_device *adev; + struct acpi_pld_info *pld; + acpi_handle *handle; + acpi_status status; + + adev = usb_acpi_get_companion_for_port(port_dev); + if (!adev) + return NULL; + + handle = adev->handle; + status = acpi_get_physical_device_location(handle, &pld); + if (ACPI_SUCCESS(status) && pld) { + port_dev->location = USB_ACPI_LOCATION_VALID + | pld->group_token << 8 | pld->group_position; + port_dev->connect_type = usb_acpi_get_connect_type(handle, pld); + ACPI_FREE(pld); + } + + return adev; +} + +static struct acpi_device * +usb_acpi_find_companion_for_device(struct usb_device *udev) +{ + struct acpi_device *adev; + struct usb_port *port_dev; + struct usb_hub *hub; + + if (!udev->parent) { + /* + * root hub is only child (_ADR=0) under its parent, the HC. + * sysdev pointer is the HC as seen from firmware. + */ + adev = ACPI_COMPANION(udev->bus->sysdev); + return acpi_find_child_device(adev, 0, false); + } + + hub = usb_hub_to_struct_hub(udev->parent); + if (!hub) + return NULL; + + /* + * This is an embedded USB device connected to a port and such + * devices share port's ACPI companion. + */ + port_dev = hub->ports[udev->portnum - 1]; + return usb_acpi_get_companion_for_port(port_dev); +} + +static struct acpi_device *usb_acpi_find_companion(struct device *dev) +{ + /* + * The USB hierarchy like following: + * + * Device (EHC1) + * Device (HUBN) + * Device (PR01) + * Device (PR11) + * Device (PR12) + * Device (FN12) + * Device (FN13) + * Device (PR13) + * ... + * where HUBN is root hub, and PRNN are USB ports and devices + * connected to them, and FNNN are individualk functions for + * connected composite USB devices. PRNN and FNNN may contain + * _CRS and other methods describing sideband resources for + * the connected device. + * + * On the kernel side both root hub and embedded USB devices are + * represented as instances of usb_device structure, and ports + * are represented as usb_port structures, so the whole process + * is split into 2 parts: finding companions for devices and + * finding companions for ports. + * + * Note that we do not handle individual functions of composite + * devices yet, for that we would need to assign companions to + * devices corresponding to USB interfaces. + */ + if (is_usb_device(dev)) + return usb_acpi_find_companion_for_device(to_usb_device(dev)); + else if (is_usb_port(dev)) + return usb_acpi_find_companion_for_port(to_usb_port(dev)); + + return NULL; +} + +static bool usb_acpi_bus_match(struct device *dev) +{ + return is_usb_device(dev) || is_usb_port(dev); +} + +static struct acpi_bus_type usb_acpi_bus = { + .name = "USB", + .match = usb_acpi_bus_match, + .find_companion = usb_acpi_find_companion, +}; + +int usb_acpi_register(void) +{ + return register_acpi_bus_type(&usb_acpi_bus); +} + +void usb_acpi_unregister(void) +{ + unregister_acpi_bus_type(&usb_acpi_bus); +} diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c new file mode 100644 index 000000000..3500e3c94 --- /dev/null +++ b/drivers/usb/core/usb.c @@ -0,0 +1,1159 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * drivers/usb/core/usb.c + * + * (C) Copyright Linus Torvalds 1999 + * (C) Copyright Johannes Erdfelt 1999-2001 + * (C) Copyright Andreas Gal 1999 + * (C) Copyright Gregory P. Smith 1999 + * (C) Copyright Deti Fliegl 1999 (new USB architecture) + * (C) Copyright Randy Dunlap 2000 + * (C) Copyright David Brownell 2000-2004 + * (C) Copyright Yggdrasil Computing, Inc. 2000 + * (usb_device_id matching changes by Adam J. Richter) + * (C) Copyright Greg Kroah-Hartman 2002-2003 + * + * Released under the GPLv2 only. + * + * NOTE! This is not actually a driver at all, rather this is + * just a collection of helper routines that implement the + * generic USB things that the real drivers can use.. + * + * Think of this as a "USB library" rather than anything else, + * with no callbacks. Callbacks are evil. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/string.h> +#include <linux/bitops.h> +#include <linux/slab.h> +#include <linux/kmod.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/errno.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> +#include <linux/mutex.h> +#include <linux/workqueue.h> +#include <linux/debugfs.h> +#include <linux/usb/of.h> + +#include <asm/io.h> +#include <linux/scatterlist.h> +#include <linux/mm.h> +#include <linux/dma-mapping.h> + +#include "hub.h" + +const char *usbcore_name = "usbcore"; + +static bool nousb; /* Disable USB when built into kernel image */ + +module_param(nousb, bool, 0444); + +/* + * for external read access to <nousb> + */ +int usb_disabled(void) +{ + return nousb; +} +EXPORT_SYMBOL_GPL(usb_disabled); + +#ifdef CONFIG_PM +/* Default delay value, in seconds */ +static int usb_autosuspend_delay = CONFIG_USB_AUTOSUSPEND_DELAY; +module_param_named(autosuspend, usb_autosuspend_delay, int, 0644); +MODULE_PARM_DESC(autosuspend, "default autosuspend delay"); + +#else +#define usb_autosuspend_delay 0 +#endif + +static bool match_endpoint(struct usb_endpoint_descriptor *epd, + struct usb_endpoint_descriptor **bulk_in, + struct usb_endpoint_descriptor **bulk_out, + struct usb_endpoint_descriptor **int_in, + struct usb_endpoint_descriptor **int_out) +{ + switch (usb_endpoint_type(epd)) { + case USB_ENDPOINT_XFER_BULK: + if (usb_endpoint_dir_in(epd)) { + if (bulk_in && !*bulk_in) { + *bulk_in = epd; + break; + } + } else { + if (bulk_out && !*bulk_out) { + *bulk_out = epd; + break; + } + } + + return false; + case USB_ENDPOINT_XFER_INT: + if (usb_endpoint_dir_in(epd)) { + if (int_in && !*int_in) { + *int_in = epd; + break; + } + } else { + if (int_out && !*int_out) { + *int_out = epd; + break; + } + } + + return false; + default: + return false; + } + + return (!bulk_in || *bulk_in) && (!bulk_out || *bulk_out) && + (!int_in || *int_in) && (!int_out || *int_out); +} + +/** + * usb_find_common_endpoints() -- look up common endpoint descriptors + * @alt: alternate setting to search + * @bulk_in: pointer to descriptor pointer, or NULL + * @bulk_out: pointer to descriptor pointer, or NULL + * @int_in: pointer to descriptor pointer, or NULL + * @int_out: pointer to descriptor pointer, or NULL + * + * Search the alternate setting's endpoint descriptors for the first bulk-in, + * bulk-out, interrupt-in and interrupt-out endpoints and return them in the + * provided pointers (unless they are NULL). + * + * If a requested endpoint is not found, the corresponding pointer is set to + * NULL. + * + * Return: Zero if all requested descriptors were found, or -ENXIO otherwise. + */ +int usb_find_common_endpoints(struct usb_host_interface *alt, + struct usb_endpoint_descriptor **bulk_in, + struct usb_endpoint_descriptor **bulk_out, + struct usb_endpoint_descriptor **int_in, + struct usb_endpoint_descriptor **int_out) +{ + struct usb_endpoint_descriptor *epd; + int i; + + if (bulk_in) + *bulk_in = NULL; + if (bulk_out) + *bulk_out = NULL; + if (int_in) + *int_in = NULL; + if (int_out) + *int_out = NULL; + + for (i = 0; i < alt->desc.bNumEndpoints; ++i) { + epd = &alt->endpoint[i].desc; + + if (match_endpoint(epd, bulk_in, bulk_out, int_in, int_out)) + return 0; + } + + return -ENXIO; +} +EXPORT_SYMBOL_GPL(usb_find_common_endpoints); + +/** + * usb_find_common_endpoints_reverse() -- look up common endpoint descriptors + * @alt: alternate setting to search + * @bulk_in: pointer to descriptor pointer, or NULL + * @bulk_out: pointer to descriptor pointer, or NULL + * @int_in: pointer to descriptor pointer, or NULL + * @int_out: pointer to descriptor pointer, or NULL + * + * Search the alternate setting's endpoint descriptors for the last bulk-in, + * bulk-out, interrupt-in and interrupt-out endpoints and return them in the + * provided pointers (unless they are NULL). + * + * If a requested endpoint is not found, the corresponding pointer is set to + * NULL. + * + * Return: Zero if all requested descriptors were found, or -ENXIO otherwise. + */ +int usb_find_common_endpoints_reverse(struct usb_host_interface *alt, + struct usb_endpoint_descriptor **bulk_in, + struct usb_endpoint_descriptor **bulk_out, + struct usb_endpoint_descriptor **int_in, + struct usb_endpoint_descriptor **int_out) +{ + struct usb_endpoint_descriptor *epd; + int i; + + if (bulk_in) + *bulk_in = NULL; + if (bulk_out) + *bulk_out = NULL; + if (int_in) + *int_in = NULL; + if (int_out) + *int_out = NULL; + + for (i = alt->desc.bNumEndpoints - 1; i >= 0; --i) { + epd = &alt->endpoint[i].desc; + + if (match_endpoint(epd, bulk_in, bulk_out, int_in, int_out)) + return 0; + } + + return -ENXIO; +} +EXPORT_SYMBOL_GPL(usb_find_common_endpoints_reverse); + +/** + * usb_find_endpoint() - Given an endpoint address, search for the endpoint's + * usb_host_endpoint structure in an interface's current altsetting. + * @intf: the interface whose current altsetting should be searched + * @ep_addr: the endpoint address (number and direction) to find + * + * Search the altsetting's list of endpoints for one with the specified address. + * + * Return: Pointer to the usb_host_endpoint if found, %NULL otherwise. + */ +static const struct usb_host_endpoint *usb_find_endpoint( + const struct usb_interface *intf, unsigned int ep_addr) +{ + int n; + const struct usb_host_endpoint *ep; + + n = intf->cur_altsetting->desc.bNumEndpoints; + ep = intf->cur_altsetting->endpoint; + for (; n > 0; (--n, ++ep)) { + if (ep->desc.bEndpointAddress == ep_addr) + return ep; + } + return NULL; +} + +/** + * usb_check_bulk_endpoints - Check whether an interface's current altsetting + * contains a set of bulk endpoints with the given addresses. + * @intf: the interface whose current altsetting should be searched + * @ep_addrs: 0-terminated array of the endpoint addresses (number and + * direction) to look for + * + * Search for endpoints with the specified addresses and check their types. + * + * Return: %true if all the endpoints are found and are bulk, %false otherwise. + */ +bool usb_check_bulk_endpoints( + const struct usb_interface *intf, const u8 *ep_addrs) +{ + const struct usb_host_endpoint *ep; + + for (; *ep_addrs; ++ep_addrs) { + ep = usb_find_endpoint(intf, *ep_addrs); + if (!ep || !usb_endpoint_xfer_bulk(&ep->desc)) + return false; + } + return true; +} +EXPORT_SYMBOL_GPL(usb_check_bulk_endpoints); + +/** + * usb_check_int_endpoints - Check whether an interface's current altsetting + * contains a set of interrupt endpoints with the given addresses. + * @intf: the interface whose current altsetting should be searched + * @ep_addrs: 0-terminated array of the endpoint addresses (number and + * direction) to look for + * + * Search for endpoints with the specified addresses and check their types. + * + * Return: %true if all the endpoints are found and are interrupt, + * %false otherwise. + */ +bool usb_check_int_endpoints( + const struct usb_interface *intf, const u8 *ep_addrs) +{ + const struct usb_host_endpoint *ep; + + for (; *ep_addrs; ++ep_addrs) { + ep = usb_find_endpoint(intf, *ep_addrs); + if (!ep || !usb_endpoint_xfer_int(&ep->desc)) + return false; + } + return true; +} +EXPORT_SYMBOL_GPL(usb_check_int_endpoints); + +/** + * usb_find_alt_setting() - Given a configuration, find the alternate setting + * for the given interface. + * @config: the configuration to search (not necessarily the current config). + * @iface_num: interface number to search in + * @alt_num: alternate interface setting number to search for. + * + * Search the configuration's interface cache for the given alt setting. + * + * Return: The alternate setting, if found. %NULL otherwise. + */ +struct usb_host_interface *usb_find_alt_setting( + struct usb_host_config *config, + unsigned int iface_num, + unsigned int alt_num) +{ + struct usb_interface_cache *intf_cache = NULL; + int i; + + if (!config) + return NULL; + for (i = 0; i < config->desc.bNumInterfaces; i++) { + if (config->intf_cache[i]->altsetting[0].desc.bInterfaceNumber + == iface_num) { + intf_cache = config->intf_cache[i]; + break; + } + } + if (!intf_cache) + return NULL; + for (i = 0; i < intf_cache->num_altsetting; i++) + if (intf_cache->altsetting[i].desc.bAlternateSetting == alt_num) + return &intf_cache->altsetting[i]; + + printk(KERN_DEBUG "Did not find alt setting %u for intf %u, " + "config %u\n", alt_num, iface_num, + config->desc.bConfigurationValue); + return NULL; +} +EXPORT_SYMBOL_GPL(usb_find_alt_setting); + +/** + * usb_ifnum_to_if - get the interface object with a given interface number + * @dev: the device whose current configuration is considered + * @ifnum: the desired interface + * + * This walks the device descriptor for the currently active configuration + * to find the interface object with the particular interface number. + * + * Note that configuration descriptors are not required to assign interface + * numbers sequentially, so that it would be incorrect to assume that + * the first interface in that descriptor corresponds to interface zero. + * This routine helps device drivers avoid such mistakes. + * However, you should make sure that you do the right thing with any + * alternate settings available for this interfaces. + * + * Don't call this function unless you are bound to one of the interfaces + * on this device or you have locked the device! + * + * Return: A pointer to the interface that has @ifnum as interface number, + * if found. %NULL otherwise. + */ +struct usb_interface *usb_ifnum_to_if(const struct usb_device *dev, + unsigned ifnum) +{ + struct usb_host_config *config = dev->actconfig; + int i; + + if (!config) + return NULL; + for (i = 0; i < config->desc.bNumInterfaces; i++) + if (config->interface[i]->altsetting[0] + .desc.bInterfaceNumber == ifnum) + return config->interface[i]; + + return NULL; +} +EXPORT_SYMBOL_GPL(usb_ifnum_to_if); + +/** + * usb_altnum_to_altsetting - get the altsetting structure with a given alternate setting number. + * @intf: the interface containing the altsetting in question + * @altnum: the desired alternate setting number + * + * This searches the altsetting array of the specified interface for + * an entry with the correct bAlternateSetting value. + * + * Note that altsettings need not be stored sequentially by number, so + * it would be incorrect to assume that the first altsetting entry in + * the array corresponds to altsetting zero. This routine helps device + * drivers avoid such mistakes. + * + * Don't call this function unless you are bound to the intf interface + * or you have locked the device! + * + * Return: A pointer to the entry of the altsetting array of @intf that + * has @altnum as the alternate setting number. %NULL if not found. + */ +struct usb_host_interface *usb_altnum_to_altsetting( + const struct usb_interface *intf, + unsigned int altnum) +{ + int i; + + for (i = 0; i < intf->num_altsetting; i++) { + if (intf->altsetting[i].desc.bAlternateSetting == altnum) + return &intf->altsetting[i]; + } + return NULL; +} +EXPORT_SYMBOL_GPL(usb_altnum_to_altsetting); + +struct find_interface_arg { + int minor; + struct device_driver *drv; +}; + +static int __find_interface(struct device *dev, const void *data) +{ + const struct find_interface_arg *arg = data; + struct usb_interface *intf; + + if (!is_usb_interface(dev)) + return 0; + + if (dev->driver != arg->drv) + return 0; + intf = to_usb_interface(dev); + return intf->minor == arg->minor; +} + +/** + * usb_find_interface - find usb_interface pointer for driver and device + * @drv: the driver whose current configuration is considered + * @minor: the minor number of the desired device + * + * This walks the bus device list and returns a pointer to the interface + * with the matching minor and driver. Note, this only works for devices + * that share the USB major number. + * + * Return: A pointer to the interface with the matching major and @minor. + */ +struct usb_interface *usb_find_interface(struct usb_driver *drv, int minor) +{ + struct find_interface_arg argb; + struct device *dev; + + argb.minor = minor; + argb.drv = &drv->drvwrap.driver; + + dev = bus_find_device(&usb_bus_type, NULL, &argb, __find_interface); + + /* Drop reference count from bus_find_device */ + put_device(dev); + + return dev ? to_usb_interface(dev) : NULL; +} +EXPORT_SYMBOL_GPL(usb_find_interface); + +struct each_dev_arg { + void *data; + int (*fn)(struct usb_device *, void *); +}; + +static int __each_dev(struct device *dev, void *data) +{ + struct each_dev_arg *arg = (struct each_dev_arg *)data; + + /* There are struct usb_interface on the same bus, filter them out */ + if (!is_usb_device(dev)) + return 0; + + return arg->fn(to_usb_device(dev), arg->data); +} + +/** + * usb_for_each_dev - iterate over all USB devices in the system + * @data: data pointer that will be handed to the callback function + * @fn: callback function to be called for each USB device + * + * Iterate over all USB devices and call @fn for each, passing it @data. If it + * returns anything other than 0, we break the iteration prematurely and return + * that value. + */ +int usb_for_each_dev(void *data, int (*fn)(struct usb_device *, void *)) +{ + struct each_dev_arg arg = {data, fn}; + + return bus_for_each_dev(&usb_bus_type, NULL, &arg, __each_dev); +} +EXPORT_SYMBOL_GPL(usb_for_each_dev); + +/** + * usb_release_dev - free a usb device structure when all users of it are finished. + * @dev: device that's been disconnected + * + * Will be called only by the device core when all users of this usb device are + * done. + */ +static void usb_release_dev(struct device *dev) +{ + struct usb_device *udev; + struct usb_hcd *hcd; + + udev = to_usb_device(dev); + hcd = bus_to_hcd(udev->bus); + + usb_destroy_configuration(udev); + usb_release_bos_descriptor(udev); + of_node_put(dev->of_node); + usb_put_hcd(hcd); + kfree(udev->product); + kfree(udev->manufacturer); + kfree(udev->serial); + kfree(udev); +} + +static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + struct usb_device *usb_dev; + + usb_dev = to_usb_device(dev); + + if (add_uevent_var(env, "BUSNUM=%03d", usb_dev->bus->busnum)) + return -ENOMEM; + + if (add_uevent_var(env, "DEVNUM=%03d", usb_dev->devnum)) + return -ENOMEM; + + return 0; +} + +#ifdef CONFIG_PM + +/* USB device Power-Management thunks. + * There's no need to distinguish here between quiescing a USB device + * and powering it down; the generic_suspend() routine takes care of + * it by skipping the usb_port_suspend() call for a quiesce. And for + * USB interfaces there's no difference at all. + */ + +static int usb_dev_prepare(struct device *dev) +{ + return 0; /* Implement eventually? */ +} + +static void usb_dev_complete(struct device *dev) +{ + /* Currently used only for rebinding interfaces */ + usb_resume_complete(dev); +} + +static int usb_dev_suspend(struct device *dev) +{ + return usb_suspend(dev, PMSG_SUSPEND); +} + +static int usb_dev_resume(struct device *dev) +{ + return usb_resume(dev, PMSG_RESUME); +} + +static int usb_dev_freeze(struct device *dev) +{ + return usb_suspend(dev, PMSG_FREEZE); +} + +static int usb_dev_thaw(struct device *dev) +{ + return usb_resume(dev, PMSG_THAW); +} + +static int usb_dev_poweroff(struct device *dev) +{ + return usb_suspend(dev, PMSG_HIBERNATE); +} + +static int usb_dev_restore(struct device *dev) +{ + return usb_resume(dev, PMSG_RESTORE); +} + +static const struct dev_pm_ops usb_device_pm_ops = { + .prepare = usb_dev_prepare, + .complete = usb_dev_complete, + .suspend = usb_dev_suspend, + .resume = usb_dev_resume, + .freeze = usb_dev_freeze, + .thaw = usb_dev_thaw, + .poweroff = usb_dev_poweroff, + .restore = usb_dev_restore, + .runtime_suspend = usb_runtime_suspend, + .runtime_resume = usb_runtime_resume, + .runtime_idle = usb_runtime_idle, +}; + +#endif /* CONFIG_PM */ + + +static char *usb_devnode(struct device *dev, + umode_t *mode, kuid_t *uid, kgid_t *gid) +{ + struct usb_device *usb_dev; + + usb_dev = to_usb_device(dev); + return kasprintf(GFP_KERNEL, "bus/usb/%03d/%03d", + usb_dev->bus->busnum, usb_dev->devnum); +} + +struct device_type usb_device_type = { + .name = "usb_device", + .release = usb_release_dev, + .uevent = usb_dev_uevent, + .devnode = usb_devnode, +#ifdef CONFIG_PM + .pm = &usb_device_pm_ops, +#endif +}; + + +/* Returns 1 if @usb_bus is WUSB, 0 otherwise */ +static unsigned usb_bus_is_wusb(struct usb_bus *bus) +{ + struct usb_hcd *hcd = bus_to_hcd(bus); + return hcd->wireless; +} + +static bool usb_dev_authorized(struct usb_device *dev, struct usb_hcd *hcd) +{ + struct usb_hub *hub; + + if (!dev->parent) + return true; /* Root hub always ok [and always wired] */ + + switch (hcd->dev_policy) { + case USB_DEVICE_AUTHORIZE_NONE: + default: + return false; + + case USB_DEVICE_AUTHORIZE_ALL: + return true; + + case USB_DEVICE_AUTHORIZE_INTERNAL: + hub = usb_hub_to_struct_hub(dev->parent); + return hub->ports[dev->portnum - 1]->connect_type == + USB_PORT_CONNECT_TYPE_HARD_WIRED; + } +} + +/** + * usb_alloc_dev - usb device constructor (usbcore-internal) + * @parent: hub to which device is connected; null to allocate a root hub + * @bus: bus used to access the device + * @port1: one-based index of port; ignored for root hubs + * + * Context: task context, might sleep. + * + * Only hub drivers (including virtual root hub drivers for host + * controllers) should ever call this. + * + * This call may not be used in a non-sleeping context. + * + * Return: On success, a pointer to the allocated usb device. %NULL on + * failure. + */ +struct usb_device *usb_alloc_dev(struct usb_device *parent, + struct usb_bus *bus, unsigned port1) +{ + struct usb_device *dev; + struct usb_hcd *usb_hcd = bus_to_hcd(bus); + unsigned root_hub = 0; + unsigned raw_port = port1; + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) + return NULL; + + if (!usb_get_hcd(usb_hcd)) { + kfree(dev); + return NULL; + } + /* Root hubs aren't true devices, so don't allocate HCD resources */ + if (usb_hcd->driver->alloc_dev && parent && + !usb_hcd->driver->alloc_dev(usb_hcd, dev)) { + usb_put_hcd(bus_to_hcd(bus)); + kfree(dev); + return NULL; + } + + device_initialize(&dev->dev); + dev->dev.bus = &usb_bus_type; + dev->dev.type = &usb_device_type; + dev->dev.groups = usb_device_groups; + set_dev_node(&dev->dev, dev_to_node(bus->sysdev)); + dev->state = USB_STATE_ATTACHED; + dev->lpm_disable_count = 1; + atomic_set(&dev->urbnum, 0); + + INIT_LIST_HEAD(&dev->ep0.urb_list); + dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE; + dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT; + /* ep0 maxpacket comes later, from device descriptor */ + usb_enable_endpoint(dev, &dev->ep0, false); + dev->can_submit = 1; + + /* Save readable and stable topology id, distinguishing devices + * by location for diagnostics, tools, driver model, etc. The + * string is a path along hub ports, from the root. Each device's + * dev->devpath will be stable until USB is re-cabled, and hubs + * are often labeled with these port numbers. The name isn't + * as stable: bus->busnum changes easily from modprobe order, + * cardbus or pci hotplugging, and so on. + */ + if (unlikely(!parent)) { + dev->devpath[0] = '0'; + dev->route = 0; + + dev->dev.parent = bus->controller; + device_set_of_node_from_dev(&dev->dev, bus->sysdev); + dev_set_name(&dev->dev, "usb%d", bus->busnum); + root_hub = 1; + } else { + /* match any labeling on the hubs; it's one-based */ + if (parent->devpath[0] == '0') { + snprintf(dev->devpath, sizeof dev->devpath, + "%d", port1); + /* Root ports are not counted in route string */ + dev->route = 0; + } else { + snprintf(dev->devpath, sizeof dev->devpath, + "%s.%d", parent->devpath, port1); + /* Route string assumes hubs have less than 16 ports */ + if (port1 < 15) + dev->route = parent->route + + (port1 << ((parent->level - 1)*4)); + else + dev->route = parent->route + + (15 << ((parent->level - 1)*4)); + } + + dev->dev.parent = &parent->dev; + dev_set_name(&dev->dev, "%d-%s", bus->busnum, dev->devpath); + + if (!parent->parent) { + /* device under root hub's port */ + raw_port = usb_hcd_find_raw_port_number(usb_hcd, + port1); + } + dev->dev.of_node = usb_of_get_device_node(parent, raw_port); + + /* hub driver sets up TT records */ + } + + dev->portnum = port1; + dev->bus = bus; + dev->parent = parent; + INIT_LIST_HEAD(&dev->filelist); + +#ifdef CONFIG_PM + pm_runtime_set_autosuspend_delay(&dev->dev, + usb_autosuspend_delay * 1000); + dev->connect_time = jiffies; + dev->active_duration = -jiffies; +#endif + + dev->authorized = usb_dev_authorized(dev, usb_hcd); + if (!root_hub) + dev->wusb = usb_bus_is_wusb(bus) ? 1 : 0; + + return dev; +} +EXPORT_SYMBOL_GPL(usb_alloc_dev); + +/** + * usb_get_dev - increments the reference count of the usb device structure + * @dev: the device being referenced + * + * Each live reference to a device should be refcounted. + * + * Drivers for USB interfaces should normally record such references in + * their probe() methods, when they bind to an interface, and release + * them by calling usb_put_dev(), in their disconnect() methods. + * However, if a driver does not access the usb_device structure after + * its disconnect() method returns then refcounting is not necessary, + * because the USB core guarantees that a usb_device will not be + * deallocated until after all of its interface drivers have been unbound. + * + * Return: A pointer to the device with the incremented reference counter. + */ +struct usb_device *usb_get_dev(struct usb_device *dev) +{ + if (dev) + get_device(&dev->dev); + return dev; +} +EXPORT_SYMBOL_GPL(usb_get_dev); + +/** + * usb_put_dev - release a use of the usb device structure + * @dev: device that's been disconnected + * + * Must be called when a user of a device is finished with it. When the last + * user of the device calls this function, the memory of the device is freed. + */ +void usb_put_dev(struct usb_device *dev) +{ + if (dev) + put_device(&dev->dev); +} +EXPORT_SYMBOL_GPL(usb_put_dev); + +/** + * usb_get_intf - increments the reference count of the usb interface structure + * @intf: the interface being referenced + * + * Each live reference to a interface must be refcounted. + * + * Drivers for USB interfaces should normally record such references in + * their probe() methods, when they bind to an interface, and release + * them by calling usb_put_intf(), in their disconnect() methods. + * However, if a driver does not access the usb_interface structure after + * its disconnect() method returns then refcounting is not necessary, + * because the USB core guarantees that a usb_interface will not be + * deallocated until after its driver has been unbound. + * + * Return: A pointer to the interface with the incremented reference counter. + */ +struct usb_interface *usb_get_intf(struct usb_interface *intf) +{ + if (intf) + get_device(&intf->dev); + return intf; +} +EXPORT_SYMBOL_GPL(usb_get_intf); + +/** + * usb_put_intf - release a use of the usb interface structure + * @intf: interface that's been decremented + * + * Must be called when a user of an interface is finished with it. When the + * last user of the interface calls this function, the memory of the interface + * is freed. + */ +void usb_put_intf(struct usb_interface *intf) +{ + if (intf) + put_device(&intf->dev); +} +EXPORT_SYMBOL_GPL(usb_put_intf); + +/** + * usb_intf_get_dma_device - acquire a reference on the usb interface's DMA endpoint + * @intf: the usb interface + * + * While a USB device cannot perform DMA operations by itself, many USB + * controllers can. A call to usb_intf_get_dma_device() returns the DMA endpoint + * for the given USB interface, if any. The returned device structure must be + * released with put_device(). + * + * See also usb_get_dma_device(). + * + * Returns: A reference to the usb interface's DMA endpoint; or NULL if none + * exists. + */ +struct device *usb_intf_get_dma_device(struct usb_interface *intf) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct device *dmadev; + + if (!udev->bus) + return NULL; + + dmadev = get_device(udev->bus->sysdev); + if (!dmadev || !dmadev->dma_mask) { + put_device(dmadev); + return NULL; + } + + return dmadev; +} +EXPORT_SYMBOL_GPL(usb_intf_get_dma_device); + +/* USB device locking + * + * USB devices and interfaces are locked using the semaphore in their + * embedded struct device. The hub driver guarantees that whenever a + * device is connected or disconnected, drivers are called with the + * USB device locked as well as their particular interface. + * + * Complications arise when several devices are to be locked at the same + * time. Only hub-aware drivers that are part of usbcore ever have to + * do this; nobody else needs to worry about it. The rule for locking + * is simple: + * + * When locking both a device and its parent, always lock the + * parent first. + */ + +/** + * usb_lock_device_for_reset - cautiously acquire the lock for a usb device structure + * @udev: device that's being locked + * @iface: interface bound to the driver making the request (optional) + * + * Attempts to acquire the device lock, but fails if the device is + * NOTATTACHED or SUSPENDED, or if iface is specified and the interface + * is neither BINDING nor BOUND. Rather than sleeping to wait for the + * lock, the routine polls repeatedly. This is to prevent deadlock with + * disconnect; in some drivers (such as usb-storage) the disconnect() + * or suspend() method will block waiting for a device reset to complete. + * + * Return: A negative error code for failure, otherwise 0. + */ +int usb_lock_device_for_reset(struct usb_device *udev, + const struct usb_interface *iface) +{ + unsigned long jiffies_expire = jiffies + HZ; + + if (udev->state == USB_STATE_NOTATTACHED) + return -ENODEV; + if (udev->state == USB_STATE_SUSPENDED) + return -EHOSTUNREACH; + if (iface && (iface->condition == USB_INTERFACE_UNBINDING || + iface->condition == USB_INTERFACE_UNBOUND)) + return -EINTR; + + while (!usb_trylock_device(udev)) { + + /* If we can't acquire the lock after waiting one second, + * we're probably deadlocked */ + if (time_after(jiffies, jiffies_expire)) + return -EBUSY; + + msleep(15); + if (udev->state == USB_STATE_NOTATTACHED) + return -ENODEV; + if (udev->state == USB_STATE_SUSPENDED) + return -EHOSTUNREACH; + if (iface && (iface->condition == USB_INTERFACE_UNBINDING || + iface->condition == USB_INTERFACE_UNBOUND)) + return -EINTR; + } + return 0; +} +EXPORT_SYMBOL_GPL(usb_lock_device_for_reset); + +/** + * usb_get_current_frame_number - return current bus frame number + * @dev: the device whose bus is being queried + * + * Return: The current frame number for the USB host controller used + * with the given USB device. This can be used when scheduling + * isochronous requests. + * + * Note: Different kinds of host controller have different "scheduling + * horizons". While one type might support scheduling only 32 frames + * into the future, others could support scheduling up to 1024 frames + * into the future. + * + */ +int usb_get_current_frame_number(struct usb_device *dev) +{ + return usb_hcd_get_frame_number(dev); +} +EXPORT_SYMBOL_GPL(usb_get_current_frame_number); + +/*-------------------------------------------------------------------*/ +/* + * __usb_get_extra_descriptor() finds a descriptor of specific type in the + * extra field of the interface and endpoint descriptor structs. + */ + +int __usb_get_extra_descriptor(char *buffer, unsigned size, + unsigned char type, void **ptr, size_t minsize) +{ + struct usb_descriptor_header *header; + + while (size >= sizeof(struct usb_descriptor_header)) { + header = (struct usb_descriptor_header *)buffer; + + if (header->bLength < 2 || header->bLength > size) { + printk(KERN_ERR + "%s: bogus descriptor, type %d length %d\n", + usbcore_name, + header->bDescriptorType, + header->bLength); + return -1; + } + + if (header->bDescriptorType == type && header->bLength >= minsize) { + *ptr = header; + return 0; + } + + buffer += header->bLength; + size -= header->bLength; + } + return -1; +} +EXPORT_SYMBOL_GPL(__usb_get_extra_descriptor); + +/** + * usb_alloc_coherent - allocate dma-consistent buffer for URB_NO_xxx_DMA_MAP + * @dev: device the buffer will be used with + * @size: requested buffer size + * @mem_flags: affect whether allocation may block + * @dma: used to return DMA address of buffer + * + * Return: Either null (indicating no buffer could be allocated), or the + * cpu-space pointer to a buffer that may be used to perform DMA to the + * specified device. Such cpu-space buffers are returned along with the DMA + * address (through the pointer provided). + * + * Note: + * These buffers are used with URB_NO_xxx_DMA_MAP set in urb->transfer_flags + * to avoid behaviors like using "DMA bounce buffers", or thrashing IOMMU + * hardware during URB completion/resubmit. The implementation varies between + * platforms, depending on details of how DMA will work to this device. + * Using these buffers also eliminates cacheline sharing problems on + * architectures where CPU caches are not DMA-coherent. On systems without + * bus-snooping caches, these buffers are uncached. + * + * When the buffer is no longer used, free it with usb_free_coherent(). + */ +void *usb_alloc_coherent(struct usb_device *dev, size_t size, gfp_t mem_flags, + dma_addr_t *dma) +{ + if (!dev || !dev->bus) + return NULL; + return hcd_buffer_alloc(dev->bus, size, mem_flags, dma); +} +EXPORT_SYMBOL_GPL(usb_alloc_coherent); + +/** + * usb_free_coherent - free memory allocated with usb_alloc_coherent() + * @dev: device the buffer was used with + * @size: requested buffer size + * @addr: CPU address of buffer + * @dma: DMA address of buffer + * + * This reclaims an I/O buffer, letting it be reused. The memory must have + * been allocated using usb_alloc_coherent(), and the parameters must match + * those provided in that allocation request. + */ +void usb_free_coherent(struct usb_device *dev, size_t size, void *addr, + dma_addr_t dma) +{ + if (!dev || !dev->bus) + return; + if (!addr) + return; + hcd_buffer_free(dev->bus, size, addr, dma); +} +EXPORT_SYMBOL_GPL(usb_free_coherent); + +/* + * Notifications of device and interface registration + */ +static int usb_bus_notify(struct notifier_block *nb, unsigned long action, + void *data) +{ + struct device *dev = data; + + switch (action) { + case BUS_NOTIFY_ADD_DEVICE: + if (dev->type == &usb_device_type) + (void) usb_create_sysfs_dev_files(to_usb_device(dev)); + else if (dev->type == &usb_if_device_type) + usb_create_sysfs_intf_files(to_usb_interface(dev)); + break; + + case BUS_NOTIFY_DEL_DEVICE: + if (dev->type == &usb_device_type) + usb_remove_sysfs_dev_files(to_usb_device(dev)); + else if (dev->type == &usb_if_device_type) + usb_remove_sysfs_intf_files(to_usb_interface(dev)); + break; + } + return 0; +} + +static struct notifier_block usb_bus_nb = { + .notifier_call = usb_bus_notify, +}; + +static void usb_debugfs_init(void) +{ + debugfs_create_file("devices", 0444, usb_debug_root, NULL, + &usbfs_devices_fops); +} + +static void usb_debugfs_cleanup(void) +{ + debugfs_lookup_and_remove("devices", usb_debug_root); +} + +/* + * Init + */ +static int __init usb_init(void) +{ + int retval; + if (usb_disabled()) { + pr_info("%s: USB support disabled\n", usbcore_name); + return 0; + } + usb_init_pool_max(); + + usb_debugfs_init(); + + usb_acpi_register(); + retval = bus_register(&usb_bus_type); + if (retval) + goto bus_register_failed; + retval = bus_register_notifier(&usb_bus_type, &usb_bus_nb); + if (retval) + goto bus_notifier_failed; + retval = usb_major_init(); + if (retval) + goto major_init_failed; + retval = usb_register(&usbfs_driver); + if (retval) + goto driver_register_failed; + retval = usb_devio_init(); + if (retval) + goto usb_devio_init_failed; + retval = usb_hub_init(); + if (retval) + goto hub_init_failed; + retval = usb_register_device_driver(&usb_generic_driver, THIS_MODULE); + if (!retval) + goto out; + + usb_hub_cleanup(); +hub_init_failed: + usb_devio_cleanup(); +usb_devio_init_failed: + usb_deregister(&usbfs_driver); +driver_register_failed: + usb_major_cleanup(); +major_init_failed: + bus_unregister_notifier(&usb_bus_type, &usb_bus_nb); +bus_notifier_failed: + bus_unregister(&usb_bus_type); +bus_register_failed: + usb_acpi_unregister(); + usb_debugfs_cleanup(); +out: + return retval; +} + +/* + * Cleanup + */ +static void __exit usb_exit(void) +{ + /* This will matter if shutdown/reboot does exitcalls. */ + if (usb_disabled()) + return; + + usb_release_quirk_list(); + usb_deregister_device_driver(&usb_generic_driver); + usb_major_cleanup(); + usb_deregister(&usbfs_driver); + usb_devio_cleanup(); + usb_hub_cleanup(); + bus_unregister_notifier(&usb_bus_type, &usb_bus_nb); + bus_unregister(&usb_bus_type); + usb_acpi_unregister(); + usb_debugfs_cleanup(); + idr_destroy(&usb_bus_idr); +} + +subsys_initcall(usb_init); +module_exit(usb_exit); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h new file mode 100644 index 000000000..3bb2e1db4 --- /dev/null +++ b/drivers/usb/core/usb.h @@ -0,0 +1,222 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Released under the GPLv2 only. + */ + +#include <linux/pm.h> +#include <linux/acpi.h> + +struct usb_hub_descriptor; +struct usb_dev_state; + +/* Functions local to drivers/usb/core/ */ + +extern int usb_create_sysfs_dev_files(struct usb_device *dev); +extern void usb_remove_sysfs_dev_files(struct usb_device *dev); +extern void usb_create_sysfs_intf_files(struct usb_interface *intf); +extern void usb_remove_sysfs_intf_files(struct usb_interface *intf); +extern int usb_create_ep_devs(struct device *parent, + struct usb_host_endpoint *endpoint, + struct usb_device *udev); +extern void usb_remove_ep_devs(struct usb_host_endpoint *endpoint); + +extern void usb_enable_endpoint(struct usb_device *dev, + struct usb_host_endpoint *ep, bool reset_toggle); +extern void usb_enable_interface(struct usb_device *dev, + struct usb_interface *intf, bool reset_toggles); +extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr, + bool reset_hardware); +extern void usb_disable_interface(struct usb_device *dev, + struct usb_interface *intf, bool reset_hardware); +extern void usb_release_interface_cache(struct kref *ref); +extern void usb_disable_device(struct usb_device *dev, int skip_ep0); +extern int usb_deauthorize_device(struct usb_device *); +extern int usb_authorize_device(struct usb_device *); +extern void usb_deauthorize_interface(struct usb_interface *); +extern void usb_authorize_interface(struct usb_interface *); +extern void usb_detect_quirks(struct usb_device *udev); +extern void usb_detect_interface_quirks(struct usb_device *udev); +extern void usb_release_quirk_list(void); +extern bool usb_endpoint_is_ignored(struct usb_device *udev, + struct usb_host_interface *intf, + struct usb_endpoint_descriptor *epd); +extern int usb_remove_device(struct usb_device *udev); + +extern struct usb_device_descriptor *usb_get_device_descriptor( + struct usb_device *udev); +extern int usb_set_isoch_delay(struct usb_device *dev); +extern int usb_get_bos_descriptor(struct usb_device *dev); +extern void usb_release_bos_descriptor(struct usb_device *dev); +extern char *usb_cache_string(struct usb_device *udev, int index); +extern int usb_set_configuration(struct usb_device *dev, int configuration); +extern int usb_choose_configuration(struct usb_device *udev); +extern int usb_generic_driver_probe(struct usb_device *udev); +extern void usb_generic_driver_disconnect(struct usb_device *udev); +extern int usb_generic_driver_suspend(struct usb_device *udev, + pm_message_t msg); +extern int usb_generic_driver_resume(struct usb_device *udev, + pm_message_t msg); + +static inline unsigned usb_get_max_power(struct usb_device *udev, + struct usb_host_config *c) +{ + /* SuperSpeed power is in 8 mA units; others are in 2 mA units */ + unsigned mul = (udev->speed >= USB_SPEED_SUPER ? 8 : 2); + + return c->desc.bMaxPower * mul; +} + +extern void usb_kick_hub_wq(struct usb_device *dev); +extern int usb_match_one_id_intf(struct usb_device *dev, + struct usb_host_interface *intf, + const struct usb_device_id *id); +extern int usb_match_device(struct usb_device *dev, + const struct usb_device_id *id); +extern const struct usb_device_id *usb_device_match_id(struct usb_device *udev, + const struct usb_device_id *id); +extern bool usb_driver_applicable(struct usb_device *udev, + struct usb_device_driver *udrv); +extern void usb_forced_unbind_intf(struct usb_interface *intf); +extern void usb_unbind_and_rebind_marked_interfaces(struct usb_device *udev); + +extern void usb_hub_release_all_ports(struct usb_device *hdev, + struct usb_dev_state *owner); +extern bool usb_device_is_owned(struct usb_device *udev); + +extern int usb_hub_init(void); +extern void usb_hub_cleanup(void); +extern int usb_major_init(void); +extern void usb_major_cleanup(void); +extern int usb_device_supports_lpm(struct usb_device *udev); +extern int usb_port_disable(struct usb_device *udev); + +#ifdef CONFIG_PM + +extern int usb_suspend(struct device *dev, pm_message_t msg); +extern int usb_resume(struct device *dev, pm_message_t msg); +extern int usb_resume_complete(struct device *dev); + +extern int usb_port_suspend(struct usb_device *dev, pm_message_t msg); +extern int usb_port_resume(struct usb_device *dev, pm_message_t msg); + +extern void usb_autosuspend_device(struct usb_device *udev); +extern int usb_autoresume_device(struct usb_device *udev); +extern int usb_remote_wakeup(struct usb_device *dev); +extern int usb_runtime_suspend(struct device *dev); +extern int usb_runtime_resume(struct device *dev); +extern int usb_runtime_idle(struct device *dev); +extern int usb_enable_usb2_hardware_lpm(struct usb_device *udev); +extern int usb_disable_usb2_hardware_lpm(struct usb_device *udev); + +extern void usbfs_notify_suspend(struct usb_device *udev); +extern void usbfs_notify_resume(struct usb_device *udev); + +#else + +static inline int usb_port_suspend(struct usb_device *udev, pm_message_t msg) +{ + return 0; +} + +static inline int usb_port_resume(struct usb_device *udev, pm_message_t msg) +{ + return 0; +} + +#define usb_autosuspend_device(udev) do {} while (0) +static inline int usb_autoresume_device(struct usb_device *udev) +{ + return 0; +} + +static inline int usb_enable_usb2_hardware_lpm(struct usb_device *udev) +{ + return 0; +} + +static inline int usb_disable_usb2_hardware_lpm(struct usb_device *udev) +{ + return 0; +} + +#endif + +extern struct bus_type usb_bus_type; +extern struct mutex usb_port_peer_mutex; +extern struct device_type usb_device_type; +extern struct device_type usb_if_device_type; +extern struct device_type usb_ep_device_type; +extern struct device_type usb_port_device_type; +extern struct usb_device_driver usb_generic_driver; + +static inline int is_usb_device(const struct device *dev) +{ + return dev->type == &usb_device_type; +} + +static inline int is_usb_interface(const struct device *dev) +{ + return dev->type == &usb_if_device_type; +} + +static inline int is_usb_endpoint(const struct device *dev) +{ + return dev->type == &usb_ep_device_type; +} + +static inline int is_usb_port(const struct device *dev) +{ + return dev->type == &usb_port_device_type; +} + +static inline int is_root_hub(struct usb_device *udev) +{ + return (udev->parent == NULL); +} + +/* Do the same for device drivers and interface drivers. */ + +static inline int is_usb_device_driver(struct device_driver *drv) +{ + return container_of(drv, struct usbdrv_wrap, driver)-> + for_devices; +} + +/* for labeling diagnostics */ +extern const char *usbcore_name; + +/* sysfs stuff */ +extern const struct attribute_group *usb_device_groups[]; +extern const struct attribute_group *usb_interface_groups[]; + +/* usbfs stuff */ +extern struct usb_driver usbfs_driver; +extern const struct file_operations usbfs_devices_fops; +extern const struct file_operations usbdev_file_operations; + +extern int usb_devio_init(void); +extern void usb_devio_cleanup(void); + +/* + * Firmware specific cookie identifying a port's location. '0' == no location + * data available + */ +typedef u32 usb_port_location_t; + +/* internal notify stuff */ +extern void usb_notify_add_device(struct usb_device *udev); +extern void usb_notify_remove_device(struct usb_device *udev); +extern void usb_notify_add_bus(struct usb_bus *ubus); +extern void usb_notify_remove_bus(struct usb_bus *ubus); +extern void usb_hub_adjust_deviceremovable(struct usb_device *hdev, + struct usb_hub_descriptor *desc); + +#ifdef CONFIG_ACPI +extern int usb_acpi_register(void); +extern void usb_acpi_unregister(void); +extern acpi_handle usb_get_hub_port_acpi_handle(struct usb_device *hdev, + int port1); +#else +static inline int usb_acpi_register(void) { return 0; }; +static inline void usb_acpi_unregister(void) { }; +#endif |