diff options
Diffstat (limited to '')
-rw-r--r-- | drivers/usb/dwc2/core_intr.c | 865 |
1 files changed, 865 insertions, 0 deletions
diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c new file mode 100644 index 000000000..158ede753 --- /dev/null +++ b/drivers/usb/dwc2/core_intr.c @@ -0,0 +1,865 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * core_intr.c - DesignWare HS OTG Controller common interrupt handling + * + * Copyright (C) 2004-2013 Synopsys, Inc. + */ + +/* + * This file contains the common interrupt handlers + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/usb.h> + +#include <linux/usb/hcd.h> +#include <linux/usb/ch11.h> + +#include "core.h" +#include "hcd.h" + +static const char *dwc2_op_state_str(struct dwc2_hsotg *hsotg) +{ + switch (hsotg->op_state) { + case OTG_STATE_A_HOST: + return "a_host"; + case OTG_STATE_A_SUSPEND: + return "a_suspend"; + case OTG_STATE_A_PERIPHERAL: + return "a_peripheral"; + case OTG_STATE_B_PERIPHERAL: + return "b_peripheral"; + case OTG_STATE_B_HOST: + return "b_host"; + default: + return "unknown"; + } +} + +/** + * dwc2_handle_usb_port_intr - handles OTG PRTINT interrupts. + * When the PRTINT interrupt fires, there are certain status bits in the Host + * Port that needs to get cleared. + * + * @hsotg: Programming view of DWC_otg controller + */ +static void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg) +{ + u32 hprt0 = dwc2_readl(hsotg, HPRT0); + + if (hprt0 & HPRT0_ENACHG) { + hprt0 &= ~HPRT0_ENA; + dwc2_writel(hsotg, hprt0, HPRT0); + } +} + +/** + * dwc2_handle_mode_mismatch_intr() - Logs a mode mismatch warning message + * + * @hsotg: Programming view of DWC_otg controller + */ +static void dwc2_handle_mode_mismatch_intr(struct dwc2_hsotg *hsotg) +{ + /* Clear interrupt */ + dwc2_writel(hsotg, GINTSTS_MODEMIS, GINTSTS); + + dev_warn(hsotg->dev, "Mode Mismatch Interrupt: currently in %s mode\n", + dwc2_is_host_mode(hsotg) ? "Host" : "Device"); +} + +/** + * dwc2_handle_otg_intr() - Handles the OTG Interrupts. It reads the OTG + * Interrupt Register (GOTGINT) to determine what interrupt has occurred. + * + * @hsotg: Programming view of DWC_otg controller + */ +static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg) +{ + u32 gotgint; + u32 gotgctl; + u32 gintmsk; + + gotgint = dwc2_readl(hsotg, GOTGINT); + gotgctl = dwc2_readl(hsotg, GOTGCTL); + dev_dbg(hsotg->dev, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint, + dwc2_op_state_str(hsotg)); + + if (gotgint & GOTGINT_SES_END_DET) { + dev_dbg(hsotg->dev, + " ++OTG Interrupt: Session End Detected++ (%s)\n", + dwc2_op_state_str(hsotg)); + gotgctl = dwc2_readl(hsotg, GOTGCTL); + + if (dwc2_is_device_mode(hsotg)) + dwc2_hsotg_disconnect(hsotg); + + if (hsotg->op_state == OTG_STATE_B_HOST) { + hsotg->op_state = OTG_STATE_B_PERIPHERAL; + } else { + /* + * If not B_HOST and Device HNP still set, HNP did + * not succeed! + */ + if (gotgctl & GOTGCTL_DEVHNPEN) { + dev_dbg(hsotg->dev, "Session End Detected\n"); + dev_err(hsotg->dev, + "Device Not Connected/Responding!\n"); + } + + /* + * If Session End Detected the B-Cable has been + * disconnected + */ + /* Reset to a clean state */ + hsotg->lx_state = DWC2_L0; + } + + gotgctl = dwc2_readl(hsotg, GOTGCTL); + gotgctl &= ~GOTGCTL_DEVHNPEN; + dwc2_writel(hsotg, gotgctl, GOTGCTL); + } + + if (gotgint & GOTGINT_SES_REQ_SUC_STS_CHNG) { + dev_dbg(hsotg->dev, + " ++OTG Interrupt: Session Request Success Status Change++\n"); + gotgctl = dwc2_readl(hsotg, GOTGCTL); + if (gotgctl & GOTGCTL_SESREQSCS) { + if (hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS && + hsotg->params.i2c_enable) { + hsotg->srp_success = 1; + } else { + /* Clear Session Request */ + gotgctl = dwc2_readl(hsotg, GOTGCTL); + gotgctl &= ~GOTGCTL_SESREQ; + dwc2_writel(hsotg, gotgctl, GOTGCTL); + } + } + } + + if (gotgint & GOTGINT_HST_NEG_SUC_STS_CHNG) { + /* + * Print statements during the HNP interrupt handling + * can cause it to fail + */ + gotgctl = dwc2_readl(hsotg, GOTGCTL); + /* + * WA for 3.00a- HW is not setting cur_mode, even sometimes + * this does not help + */ + if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a) + udelay(100); + if (gotgctl & GOTGCTL_HSTNEGSCS) { + if (dwc2_is_host_mode(hsotg)) { + hsotg->op_state = OTG_STATE_B_HOST; + /* + * Need to disable SOF interrupt immediately. + * When switching from device to host, the PCD + * interrupt handler won't handle the interrupt + * if host mode is already set. The HCD + * interrupt handler won't get called if the + * HCD state is HALT. This means that the + * interrupt does not get handled and Linux + * complains loudly. + */ + gintmsk = dwc2_readl(hsotg, GINTMSK); + gintmsk &= ~GINTSTS_SOF; + dwc2_writel(hsotg, gintmsk, GINTMSK); + + /* + * Call callback function with spin lock + * released + */ + spin_unlock(&hsotg->lock); + + /* Initialize the Core for Host mode */ + dwc2_hcd_start(hsotg); + spin_lock(&hsotg->lock); + hsotg->op_state = OTG_STATE_B_HOST; + } + } else { + gotgctl = dwc2_readl(hsotg, GOTGCTL); + gotgctl &= ~(GOTGCTL_HNPREQ | GOTGCTL_DEVHNPEN); + dwc2_writel(hsotg, gotgctl, GOTGCTL); + dev_dbg(hsotg->dev, "HNP Failed\n"); + dev_err(hsotg->dev, + "Device Not Connected/Responding\n"); + } + } + + if (gotgint & GOTGINT_HST_NEG_DET) { + /* + * The disconnect interrupt is set at the same time as + * Host Negotiation Detected. During the mode switch all + * interrupts are cleared so the disconnect interrupt + * handler will not get executed. + */ + dev_dbg(hsotg->dev, + " ++OTG Interrupt: Host Negotiation Detected++ (%s)\n", + (dwc2_is_host_mode(hsotg) ? "Host" : "Device")); + if (dwc2_is_device_mode(hsotg)) { + dev_dbg(hsotg->dev, "a_suspend->a_peripheral (%d)\n", + hsotg->op_state); + spin_unlock(&hsotg->lock); + dwc2_hcd_disconnect(hsotg, false); + spin_lock(&hsotg->lock); + hsotg->op_state = OTG_STATE_A_PERIPHERAL; + } else { + /* Need to disable SOF interrupt immediately */ + gintmsk = dwc2_readl(hsotg, GINTMSK); + gintmsk &= ~GINTSTS_SOF; + dwc2_writel(hsotg, gintmsk, GINTMSK); + spin_unlock(&hsotg->lock); + dwc2_hcd_start(hsotg); + spin_lock(&hsotg->lock); + hsotg->op_state = OTG_STATE_A_HOST; + } + } + + if (gotgint & GOTGINT_A_DEV_TOUT_CHG) + dev_dbg(hsotg->dev, + " ++OTG Interrupt: A-Device Timeout Change++\n"); + if (gotgint & GOTGINT_DBNCE_DONE) + dev_dbg(hsotg->dev, " ++OTG Interrupt: Debounce Done++\n"); + + /* Clear GOTGINT */ + dwc2_writel(hsotg, gotgint, GOTGINT); +} + +/** + * dwc2_handle_conn_id_status_change_intr() - Handles the Connector ID Status + * Change Interrupt + * + * @hsotg: Programming view of DWC_otg controller + * + * Reads the OTG Interrupt Register (GOTCTL) to determine whether this is a + * Device to Host Mode transition or a Host to Device Mode transition. This only + * occurs when the cable is connected/removed from the PHY connector. + */ +static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg) +{ + u32 gintmsk; + + /* Clear interrupt */ + dwc2_writel(hsotg, GINTSTS_CONIDSTSCHNG, GINTSTS); + + /* Need to disable SOF interrupt immediately */ + gintmsk = dwc2_readl(hsotg, GINTMSK); + gintmsk &= ~GINTSTS_SOF; + dwc2_writel(hsotg, gintmsk, GINTMSK); + + dev_dbg(hsotg->dev, " ++Connector ID Status Change Interrupt++ (%s)\n", + dwc2_is_host_mode(hsotg) ? "Host" : "Device"); + + /* + * Need to schedule a work, as there are possible DELAY function calls. + */ + if (hsotg->wq_otg) + queue_work(hsotg->wq_otg, &hsotg->wf_otg); +} + +/** + * dwc2_handle_session_req_intr() - This interrupt indicates that a device is + * initiating the Session Request Protocol to request the host to turn on bus + * power so a new session can begin + * + * @hsotg: Programming view of DWC_otg controller + * + * This handler responds by turning on bus power. If the DWC_otg controller is + * in low power mode, this handler brings the controller out of low power mode + * before turning on bus power. + */ +static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg) +{ + int ret; + u32 hprt0; + + /* Clear interrupt */ + dwc2_writel(hsotg, GINTSTS_SESSREQINT, GINTSTS); + + dev_dbg(hsotg->dev, "Session request interrupt - lx_state=%d\n", + hsotg->lx_state); + + if (dwc2_is_device_mode(hsotg)) { + if (hsotg->lx_state == DWC2_L2) { + if (hsotg->in_ppd) { + ret = dwc2_exit_partial_power_down(hsotg, 0, + true); + if (ret) + dev_err(hsotg->dev, + "exit power_down failed\n"); + } + + /* Exit gadget mode clock gating. */ + if (hsotg->params.power_down == + DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended) + dwc2_gadget_exit_clock_gating(hsotg, 0); + } + + /* + * Report disconnect if there is any previous session + * established + */ + dwc2_hsotg_disconnect(hsotg); + } else { + /* Turn on the port power bit. */ + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 |= HPRT0_PWR; + dwc2_writel(hsotg, hprt0, HPRT0); + /* Connect hcd after port power is set. */ + dwc2_hcd_connect(hsotg); + } +} + +/** + * dwc2_wakeup_from_lpm_l1 - Exit the device from LPM L1 state + * + * @hsotg: Programming view of DWC_otg controller + * + */ +static void dwc2_wakeup_from_lpm_l1(struct dwc2_hsotg *hsotg) +{ + u32 glpmcfg; + u32 i = 0; + + if (hsotg->lx_state != DWC2_L1) { + dev_err(hsotg->dev, "Core isn't in DWC2_L1 state\n"); + return; + } + + glpmcfg = dwc2_readl(hsotg, GLPMCFG); + if (dwc2_is_device_mode(hsotg)) { + dev_dbg(hsotg->dev, "Exit from L1 state\n"); + glpmcfg &= ~GLPMCFG_ENBLSLPM; + glpmcfg &= ~GLPMCFG_HIRD_THRES_EN; + dwc2_writel(hsotg, glpmcfg, GLPMCFG); + + do { + glpmcfg = dwc2_readl(hsotg, GLPMCFG); + + if (!(glpmcfg & (GLPMCFG_COREL1RES_MASK | + GLPMCFG_L1RESUMEOK | GLPMCFG_SLPSTS))) + break; + + udelay(1); + } while (++i < 200); + + if (i == 200) { + dev_err(hsotg->dev, "Failed to exit L1 sleep state in 200us.\n"); + return; + } + dwc2_gadget_init_lpm(hsotg); + } else { + /* TODO */ + dev_err(hsotg->dev, "Host side LPM is not supported.\n"); + return; + } + + /* Change to L0 state */ + hsotg->lx_state = DWC2_L0; + + /* Inform gadget to exit from L1 */ + call_gadget(hsotg, resume); +} + +/* + * This interrupt indicates that the DWC_otg controller has detected a + * resume or remote wakeup sequence. If the DWC_otg controller is in + * low power mode, the handler must brings the controller out of low + * power mode. The controller automatically begins resume signaling. + * The handler schedules a time to stop resume signaling. + */ +static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg) +{ + int ret; + + /* Clear interrupt */ + dwc2_writel(hsotg, GINTSTS_WKUPINT, GINTSTS); + + dev_dbg(hsotg->dev, "++Resume or Remote Wakeup Detected Interrupt++\n"); + dev_dbg(hsotg->dev, "%s lxstate = %d\n", __func__, hsotg->lx_state); + + if (hsotg->lx_state == DWC2_L1) { + dwc2_wakeup_from_lpm_l1(hsotg); + return; + } + + if (dwc2_is_device_mode(hsotg)) { + dev_dbg(hsotg->dev, "DSTS=0x%0x\n", + dwc2_readl(hsotg, DSTS)); + if (hsotg->lx_state == DWC2_L2) { + if (hsotg->in_ppd) { + u32 dctl = dwc2_readl(hsotg, DCTL); + /* Clear Remote Wakeup Signaling */ + dctl &= ~DCTL_RMTWKUPSIG; + dwc2_writel(hsotg, dctl, DCTL); + ret = dwc2_exit_partial_power_down(hsotg, 1, + true); + if (ret) + dev_err(hsotg->dev, + "exit partial_power_down failed\n"); + call_gadget(hsotg, resume); + } + + /* Exit gadget mode clock gating. */ + if (hsotg->params.power_down == + DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended) + dwc2_gadget_exit_clock_gating(hsotg, 0); + } else { + /* Change to L0 state */ + hsotg->lx_state = DWC2_L0; + } + } else { + if (hsotg->lx_state == DWC2_L2) { + if (hsotg->in_ppd) { + ret = dwc2_exit_partial_power_down(hsotg, 1, + true); + if (ret) + dev_err(hsotg->dev, + "exit partial_power_down failed\n"); + } + + if (hsotg->params.power_down == + DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended) + dwc2_host_exit_clock_gating(hsotg, 1); + + /* + * If we've got this quirk then the PHY is stuck upon + * wakeup. Assert reset. This will propagate out and + * eventually we'll re-enumerate the device. Not great + * but the best we can do. We can't call phy_reset() + * at interrupt time but there's no hurry, so we'll + * schedule it for later. + */ + if (hsotg->reset_phy_on_wake) + dwc2_host_schedule_phy_reset(hsotg); + + mod_timer(&hsotg->wkp_timer, + jiffies + msecs_to_jiffies(71)); + } else { + /* Change to L0 state */ + hsotg->lx_state = DWC2_L0; + } + } +} + +/* + * This interrupt indicates that a device has been disconnected from the + * root port + */ +static void dwc2_handle_disconnect_intr(struct dwc2_hsotg *hsotg) +{ + dwc2_writel(hsotg, GINTSTS_DISCONNINT, GINTSTS); + + dev_dbg(hsotg->dev, "++Disconnect Detected Interrupt++ (%s) %s\n", + dwc2_is_host_mode(hsotg) ? "Host" : "Device", + dwc2_op_state_str(hsotg)); + + if (hsotg->op_state == OTG_STATE_A_HOST) + dwc2_hcd_disconnect(hsotg, false); +} + +/* + * This interrupt indicates that SUSPEND state has been detected on the USB. + * + * For HNP the USB Suspend interrupt signals the change from "a_peripheral" + * to "a_host". + * + * When power management is enabled the core will be put in low power mode. + */ +static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg) +{ + u32 dsts; + int ret; + + /* Clear interrupt */ + dwc2_writel(hsotg, GINTSTS_USBSUSP, GINTSTS); + + dev_dbg(hsotg->dev, "USB SUSPEND\n"); + + if (dwc2_is_device_mode(hsotg)) { + /* + * Check the Device status register to determine if the Suspend + * state is active + */ + dsts = dwc2_readl(hsotg, DSTS); + dev_dbg(hsotg->dev, "%s: DSTS=0x%0x\n", __func__, dsts); + dev_dbg(hsotg->dev, + "DSTS.Suspend Status=%d HWCFG4.Power Optimize=%d HWCFG4.Hibernation=%d\n", + !!(dsts & DSTS_SUSPSTS), + hsotg->hw_params.power_optimized, + hsotg->hw_params.hibernation); + + /* Ignore suspend request before enumeration */ + if (!dwc2_is_device_connected(hsotg)) { + dev_dbg(hsotg->dev, + "ignore suspend request before enumeration\n"); + return; + } + if (dsts & DSTS_SUSPSTS) { + switch (hsotg->params.power_down) { + case DWC2_POWER_DOWN_PARAM_PARTIAL: + ret = dwc2_enter_partial_power_down(hsotg); + if (ret) + dev_err(hsotg->dev, + "enter partial_power_down failed\n"); + + udelay(100); + + /* Ask phy to be suspended */ + if (!IS_ERR_OR_NULL(hsotg->uphy)) + usb_phy_set_suspend(hsotg->uphy, true); + break; + case DWC2_POWER_DOWN_PARAM_HIBERNATION: + ret = dwc2_enter_hibernation(hsotg, 0); + if (ret) + dev_err(hsotg->dev, + "enter hibernation failed\n"); + break; + case DWC2_POWER_DOWN_PARAM_NONE: + /* + * If neither hibernation nor partial power down are supported, + * clock gating is used to save power. + */ + if (!hsotg->params.no_clock_gating) + dwc2_gadget_enter_clock_gating(hsotg); + } + + /* + * Change to L2 (suspend) state before releasing + * spinlock + */ + hsotg->lx_state = DWC2_L2; + + /* Call gadget suspend callback */ + call_gadget(hsotg, suspend); + } + } else { + if (hsotg->op_state == OTG_STATE_A_PERIPHERAL) { + dev_dbg(hsotg->dev, "a_peripheral->a_host\n"); + + /* Change to L2 (suspend) state */ + hsotg->lx_state = DWC2_L2; + /* Clear the a_peripheral flag, back to a_host */ + spin_unlock(&hsotg->lock); + dwc2_hcd_start(hsotg); + spin_lock(&hsotg->lock); + hsotg->op_state = OTG_STATE_A_HOST; + } + } +} + +/** + * dwc2_handle_lpm_intr - GINTSTS_LPMTRANRCVD Interrupt handler + * + * @hsotg: Programming view of DWC_otg controller + * + */ +static void dwc2_handle_lpm_intr(struct dwc2_hsotg *hsotg) +{ + u32 glpmcfg; + u32 pcgcctl; + u32 hird; + u32 hird_thres; + u32 hird_thres_en; + u32 enslpm; + + /* Clear interrupt */ + dwc2_writel(hsotg, GINTSTS_LPMTRANRCVD, GINTSTS); + + glpmcfg = dwc2_readl(hsotg, GLPMCFG); + + if (!(glpmcfg & GLPMCFG_LPMCAP)) { + dev_err(hsotg->dev, "Unexpected LPM interrupt\n"); + return; + } + + hird = (glpmcfg & GLPMCFG_HIRD_MASK) >> GLPMCFG_HIRD_SHIFT; + hird_thres = (glpmcfg & GLPMCFG_HIRD_THRES_MASK & + ~GLPMCFG_HIRD_THRES_EN) >> GLPMCFG_HIRD_THRES_SHIFT; + hird_thres_en = glpmcfg & GLPMCFG_HIRD_THRES_EN; + enslpm = glpmcfg & GLPMCFG_ENBLSLPM; + + if (dwc2_is_device_mode(hsotg)) { + dev_dbg(hsotg->dev, "HIRD_THRES_EN = %d\n", hird_thres_en); + + if (hird_thres_en && hird >= hird_thres) { + dev_dbg(hsotg->dev, "L1 with utmi_l1_suspend_n\n"); + } else if (enslpm) { + dev_dbg(hsotg->dev, "L1 with utmi_sleep_n\n"); + } else { + dev_dbg(hsotg->dev, "Entering Sleep with L1 Gating\n"); + + pcgcctl = dwc2_readl(hsotg, PCGCTL); + pcgcctl |= PCGCTL_ENBL_SLEEP_GATING; + dwc2_writel(hsotg, pcgcctl, PCGCTL); + } + /** + * Examine prt_sleep_sts after TL1TokenTetry period max (10 us) + */ + udelay(10); + + glpmcfg = dwc2_readl(hsotg, GLPMCFG); + + if (glpmcfg & GLPMCFG_SLPSTS) { + /* Save the current state */ + hsotg->lx_state = DWC2_L1; + dev_dbg(hsotg->dev, + "Core is in L1 sleep glpmcfg=%08x\n", glpmcfg); + + /* Inform gadget that we are in L1 state */ + call_gadget(hsotg, suspend); + } + } +} + +#define GINTMSK_COMMON (GINTSTS_WKUPINT | GINTSTS_SESSREQINT | \ + GINTSTS_CONIDSTSCHNG | GINTSTS_OTGINT | \ + GINTSTS_MODEMIS | GINTSTS_DISCONNINT | \ + GINTSTS_USBSUSP | GINTSTS_PRTINT | \ + GINTSTS_LPMTRANRCVD) + +/* + * This function returns the Core Interrupt register + */ +static u32 dwc2_read_common_intr(struct dwc2_hsotg *hsotg) +{ + u32 gintsts; + u32 gintmsk; + u32 gahbcfg; + u32 gintmsk_common = GINTMSK_COMMON; + + gintsts = dwc2_readl(hsotg, GINTSTS); + gintmsk = dwc2_readl(hsotg, GINTMSK); + gahbcfg = dwc2_readl(hsotg, GAHBCFG); + + /* If any common interrupts set */ + if (gintsts & gintmsk_common) + dev_dbg(hsotg->dev, "gintsts=%08x gintmsk=%08x\n", + gintsts, gintmsk); + + if (gahbcfg & GAHBCFG_GLBL_INTR_EN) + return gintsts & gintmsk & gintmsk_common; + else + return 0; +} + +/** + * dwc_handle_gpwrdn_disc_det() - Handles the gpwrdn disconnect detect. + * Exits hibernation without restoring registers. + * + * @hsotg: Programming view of DWC_otg controller + * @gpwrdn: GPWRDN register + */ +static inline void dwc_handle_gpwrdn_disc_det(struct dwc2_hsotg *hsotg, + u32 gpwrdn) +{ + u32 gpwrdn_tmp; + + /* Switch-on voltage to the core */ + gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN); + gpwrdn_tmp &= ~GPWRDN_PWRDNSWTCH; + dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN); + udelay(5); + + /* Reset core */ + gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN); + gpwrdn_tmp &= ~GPWRDN_PWRDNRSTN; + dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN); + udelay(5); + + /* Disable Power Down Clamp */ + gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN); + gpwrdn_tmp &= ~GPWRDN_PWRDNCLMP; + dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN); + udelay(5); + + /* Deassert reset core */ + gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN); + gpwrdn_tmp |= GPWRDN_PWRDNRSTN; + dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN); + udelay(5); + + /* Disable PMU interrupt */ + gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN); + gpwrdn_tmp &= ~GPWRDN_PMUINTSEL; + dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN); + + /* De-assert Wakeup Logic */ + gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN); + gpwrdn_tmp &= ~GPWRDN_PMUACTV; + dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN); + + hsotg->hibernated = 0; + hsotg->bus_suspended = 0; + + if (gpwrdn & GPWRDN_IDSTS) { + hsotg->op_state = OTG_STATE_B_PERIPHERAL; + dwc2_core_init(hsotg, false); + dwc2_enable_global_interrupts(hsotg); + dwc2_hsotg_core_init_disconnected(hsotg, false); + dwc2_hsotg_core_connect(hsotg); + } else { + hsotg->op_state = OTG_STATE_A_HOST; + + /* Initialize the Core for Host mode */ + dwc2_core_init(hsotg, false); + dwc2_enable_global_interrupts(hsotg); + dwc2_hcd_start(hsotg); + } +} + +/* + * GPWRDN interrupt handler. + * + * The GPWRDN interrupts are those that occur in both Host and + * Device mode while core is in hibernated state. + */ +static int dwc2_handle_gpwrdn_intr(struct dwc2_hsotg *hsotg) +{ + u32 gpwrdn; + int linestate; + int ret = 0; + + gpwrdn = dwc2_readl(hsotg, GPWRDN); + /* clear all interrupt */ + dwc2_writel(hsotg, gpwrdn, GPWRDN); + linestate = (gpwrdn & GPWRDN_LINESTATE_MASK) >> GPWRDN_LINESTATE_SHIFT; + dev_dbg(hsotg->dev, + "%s: dwc2_handle_gpwrdwn_intr called gpwrdn= %08x\n", __func__, + gpwrdn); + + if ((gpwrdn & GPWRDN_DISCONN_DET) && + (gpwrdn & GPWRDN_DISCONN_DET_MSK) && !linestate) { + dev_dbg(hsotg->dev, "%s: GPWRDN_DISCONN_DET\n", __func__); + /* + * Call disconnect detect function to exit from + * hibernation + */ + dwc_handle_gpwrdn_disc_det(hsotg, gpwrdn); + } else if ((gpwrdn & GPWRDN_LNSTSCHG) && + (gpwrdn & GPWRDN_LNSTSCHG_MSK) && linestate) { + dev_dbg(hsotg->dev, "%s: GPWRDN_LNSTSCHG\n", __func__); + if (hsotg->hw_params.hibernation && + hsotg->hibernated) { + if (gpwrdn & GPWRDN_IDSTS) { + ret = dwc2_exit_hibernation(hsotg, 0, 0, 0); + if (ret) + dev_err(hsotg->dev, + "exit hibernation failed.\n"); + call_gadget(hsotg, resume); + } else { + ret = dwc2_exit_hibernation(hsotg, 1, 0, 1); + if (ret) + dev_err(hsotg->dev, + "exit hibernation failed.\n"); + } + } + } else if ((gpwrdn & GPWRDN_RST_DET) && + (gpwrdn & GPWRDN_RST_DET_MSK)) { + dev_dbg(hsotg->dev, "%s: GPWRDN_RST_DET\n", __func__); + if (!linestate) { + ret = dwc2_exit_hibernation(hsotg, 0, 1, 0); + if (ret) + dev_err(hsotg->dev, + "exit hibernation failed.\n"); + } + } else if ((gpwrdn & GPWRDN_STS_CHGINT) && + (gpwrdn & GPWRDN_STS_CHGINT_MSK)) { + dev_dbg(hsotg->dev, "%s: GPWRDN_STS_CHGINT\n", __func__); + /* + * As GPWRDN_STS_CHGINT exit from hibernation flow is + * the same as in GPWRDN_DISCONN_DET flow. Call + * disconnect detect helper function to exit from + * hibernation. + */ + dwc_handle_gpwrdn_disc_det(hsotg, gpwrdn); + } + + return ret; +} + +/* + * Common interrupt handler + * + * The common interrupts are those that occur in both Host and Device mode. + * This handler handles the following interrupts: + * - Mode Mismatch Interrupt + * - OTG Interrupt + * - Connector ID Status Change Interrupt + * - Disconnect Interrupt + * - Session Request Interrupt + * - Resume / Remote Wakeup Detected Interrupt + * - Suspend Interrupt + */ +irqreturn_t dwc2_handle_common_intr(int irq, void *dev) +{ + struct dwc2_hsotg *hsotg = dev; + u32 gintsts; + irqreturn_t retval = IRQ_NONE; + + spin_lock(&hsotg->lock); + + if (!dwc2_is_controller_alive(hsotg)) { + dev_warn(hsotg->dev, "Controller is dead\n"); + goto out; + } + + /* Reading current frame number value in device or host modes. */ + if (dwc2_is_device_mode(hsotg)) + hsotg->frame_number = (dwc2_readl(hsotg, DSTS) + & DSTS_SOFFN_MASK) >> DSTS_SOFFN_SHIFT; + else + hsotg->frame_number = (dwc2_readl(hsotg, HFNUM) + & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT; + + gintsts = dwc2_read_common_intr(hsotg); + if (gintsts & ~GINTSTS_PRTINT) + retval = IRQ_HANDLED; + + /* In case of hibernated state gintsts must not work */ + if (hsotg->hibernated) { + dwc2_handle_gpwrdn_intr(hsotg); + retval = IRQ_HANDLED; + goto out; + } + + if (gintsts & GINTSTS_MODEMIS) + dwc2_handle_mode_mismatch_intr(hsotg); + if (gintsts & GINTSTS_OTGINT) + dwc2_handle_otg_intr(hsotg); + if (gintsts & GINTSTS_CONIDSTSCHNG) + dwc2_handle_conn_id_status_change_intr(hsotg); + if (gintsts & GINTSTS_DISCONNINT) + dwc2_handle_disconnect_intr(hsotg); + if (gintsts & GINTSTS_SESSREQINT) + dwc2_handle_session_req_intr(hsotg); + if (gintsts & GINTSTS_WKUPINT) + dwc2_handle_wakeup_detected_intr(hsotg); + if (gintsts & GINTSTS_USBSUSP) + dwc2_handle_usb_suspend_intr(hsotg); + if (gintsts & GINTSTS_LPMTRANRCVD) + dwc2_handle_lpm_intr(hsotg); + + if (gintsts & GINTSTS_PRTINT) { + /* + * The port interrupt occurs while in device mode with HPRT0 + * Port Enable/Disable + */ + if (dwc2_is_device_mode(hsotg)) { + dev_dbg(hsotg->dev, + " --Port interrupt received in Device mode--\n"); + dwc2_handle_usb_port_intr(hsotg); + retval = IRQ_HANDLED; + } + } + +out: + spin_unlock(&hsotg->lock); + return retval; +} |