diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/usb/gadget/function/u_ether.c | 1223 |
1 files changed, 1223 insertions, 0 deletions
diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c new file mode 100644 index 000000000..1f420ff8f --- /dev/null +++ b/drivers/usb/gadget/function/u_ether.c @@ -0,0 +1,1223 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * u_ether.c -- Ethernet-over-USB link layer utilities for Gadget stack + * + * Copyright (C) 2003-2005,2008 David Brownell + * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger + * Copyright (C) 2008 Nokia Corporation + */ + +/* #define VERBOSE_DEBUG */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/gfp.h> +#include <linux/device.h> +#include <linux/ctype.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/if_vlan.h> +#include <linux/string_helpers.h> + +#include "u_ether.h" + + +/* + * This component encapsulates the Ethernet link glue needed to provide + * one (!) network link through the USB gadget stack, normally "usb0". + * + * The control and data models are handled by the function driver which + * connects to this code; such as CDC Ethernet (ECM or EEM), + * "CDC Subset", or RNDIS. That includes all descriptor and endpoint + * management. + * + * Link level addressing is handled by this component using module + * parameters; if no such parameters are provided, random link level + * addresses are used. Each end of the link uses one address. The + * host end address is exported in various ways, and is often recorded + * in configuration databases. + * + * The driver which assembles each configuration using such a link is + * responsible for ensuring that each configuration includes at most one + * instance of is network link. (The network layer provides ways for + * this single "physical" link to be used by multiple virtual links.) + */ + +#define UETH__VERSION "29-May-2008" + +/* Experiments show that both Linux and Windows hosts allow up to 16k + * frame sizes. Set the max MTU size to 15k+52 to prevent allocating 32k + * blocks and still have efficient handling. */ +#define GETHER_MAX_MTU_SIZE 15412 +#define GETHER_MAX_ETH_FRAME_LEN (GETHER_MAX_MTU_SIZE + ETH_HLEN) + +struct eth_dev { + /* lock is held while accessing port_usb + */ + spinlock_t lock; + struct gether *port_usb; + + struct net_device *net; + struct usb_gadget *gadget; + + spinlock_t req_lock; /* guard {rx,tx}_reqs */ + struct list_head tx_reqs, rx_reqs; + atomic_t tx_qlen; + + struct sk_buff_head rx_frames; + + unsigned qmult; + + unsigned header_len; + struct sk_buff *(*wrap)(struct gether *, struct sk_buff *skb); + int (*unwrap)(struct gether *, + struct sk_buff *skb, + struct sk_buff_head *list); + + struct work_struct work; + + unsigned long todo; +#define WORK_RX_MEMORY 0 + + bool zlp; + bool no_skb_reserve; + bool ifname_set; + u8 host_mac[ETH_ALEN]; + u8 dev_mac[ETH_ALEN]; +}; + +/*-------------------------------------------------------------------------*/ + +#define RX_EXTRA 20 /* bytes guarding against rx overflows */ + +#define DEFAULT_QLEN 2 /* double buffering by default */ + +/* for dual-speed hardware, use deeper queues at high/super speed */ +static inline int qlen(struct usb_gadget *gadget, unsigned qmult) +{ + if (gadget_is_dualspeed(gadget) && (gadget->speed == USB_SPEED_HIGH || + gadget->speed >= USB_SPEED_SUPER)) + return qmult * DEFAULT_QLEN; + else + return DEFAULT_QLEN; +} + +/*-------------------------------------------------------------------------*/ + +/* REVISIT there must be a better way than having two sets + * of debug calls ... + */ + +#undef DBG +#undef VDBG +#undef ERROR +#undef INFO + +#define xprintk(d, level, fmt, args...) \ + printk(level "%s: " fmt , (d)->net->name , ## args) + +#ifdef DEBUG +#undef DEBUG +#define DBG(dev, fmt, args...) \ + xprintk(dev , KERN_DEBUG , fmt , ## args) +#else +#define DBG(dev, fmt, args...) \ + do { } while (0) +#endif /* DEBUG */ + +#ifdef VERBOSE_DEBUG +#define VDBG DBG +#else +#define VDBG(dev, fmt, args...) \ + do { } while (0) +#endif /* DEBUG */ + +#define ERROR(dev, fmt, args...) \ + xprintk(dev , KERN_ERR , fmt , ## args) +#define INFO(dev, fmt, args...) \ + xprintk(dev , KERN_INFO , fmt , ## args) + +/*-------------------------------------------------------------------------*/ + +/* NETWORK DRIVER HOOKUP (to the layer above this driver) */ + +static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p) +{ + struct eth_dev *dev = netdev_priv(net); + + strscpy(p->driver, "g_ether", sizeof(p->driver)); + strscpy(p->version, UETH__VERSION, sizeof(p->version)); + strscpy(p->fw_version, dev->gadget->name, sizeof(p->fw_version)); + strscpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof(p->bus_info)); +} + +/* REVISIT can also support: + * - WOL (by tracking suspends and issuing remote wakeup) + * - msglevel (implies updated messaging) + * - ... probably more ethtool ops + */ + +static const struct ethtool_ops ops = { + .get_drvinfo = eth_get_drvinfo, + .get_link = ethtool_op_get_link, +}; + +static void defer_kevent(struct eth_dev *dev, int flag) +{ + if (test_and_set_bit(flag, &dev->todo)) + return; + if (!schedule_work(&dev->work)) + ERROR(dev, "kevent %d may have been dropped\n", flag); + else + DBG(dev, "kevent %d scheduled\n", flag); +} + +static void rx_complete(struct usb_ep *ep, struct usb_request *req); + +static int +rx_submit(struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags) +{ + struct usb_gadget *g = dev->gadget; + struct sk_buff *skb; + int retval = -ENOMEM; + size_t size = 0; + struct usb_ep *out; + unsigned long flags; + + spin_lock_irqsave(&dev->lock, flags); + if (dev->port_usb) + out = dev->port_usb->out_ep; + else + out = NULL; + + if (!out) + { + spin_unlock_irqrestore(&dev->lock, flags); + return -ENOTCONN; + } + + /* Padding up to RX_EXTRA handles minor disagreements with host. + * Normally we use the USB "terminate on short read" convention; + * so allow up to (N*maxpacket), since that memory is normally + * already allocated. Some hardware doesn't deal well with short + * reads (e.g. DMA must be N*maxpacket), so for now don't trim a + * byte off the end (to force hardware errors on overflow). + * + * RNDIS uses internal framing, and explicitly allows senders to + * pad to end-of-packet. That's potentially nice for speed, but + * means receivers can't recover lost synch on their own (because + * new packets don't only start after a short RX). + */ + size += sizeof(struct ethhdr) + dev->net->mtu + RX_EXTRA; + size += dev->port_usb->header_len; + + if (g->quirk_ep_out_aligned_size) { + size += out->maxpacket - 1; + size -= size % out->maxpacket; + } + + if (dev->port_usb->is_fixed) + size = max_t(size_t, size, dev->port_usb->fixed_out_len); + spin_unlock_irqrestore(&dev->lock, flags); + + skb = __netdev_alloc_skb(dev->net, size + NET_IP_ALIGN, gfp_flags); + if (skb == NULL) { + DBG(dev, "no rx skb\n"); + goto enomem; + } + + /* Some platforms perform better when IP packets are aligned, + * but on at least one, checksumming fails otherwise. Note: + * RNDIS headers involve variable numbers of LE32 values. + */ + if (likely(!dev->no_skb_reserve)) + skb_reserve(skb, NET_IP_ALIGN); + + req->buf = skb->data; + req->length = size; + req->complete = rx_complete; + req->context = skb; + + retval = usb_ep_queue(out, req, gfp_flags); + if (retval == -ENOMEM) +enomem: + defer_kevent(dev, WORK_RX_MEMORY); + if (retval) { + DBG(dev, "rx submit --> %d\n", retval); + if (skb) + dev_kfree_skb_any(skb); + spin_lock_irqsave(&dev->req_lock, flags); + list_add(&req->list, &dev->rx_reqs); + spin_unlock_irqrestore(&dev->req_lock, flags); + } + return retval; +} + +static void rx_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct sk_buff *skb = req->context, *skb2; + struct eth_dev *dev = ep->driver_data; + int status = req->status; + + switch (status) { + + /* normal completion */ + case 0: + skb_put(skb, req->actual); + + if (dev->unwrap) { + unsigned long flags; + + spin_lock_irqsave(&dev->lock, flags); + if (dev->port_usb) { + status = dev->unwrap(dev->port_usb, + skb, + &dev->rx_frames); + } else { + dev_kfree_skb_any(skb); + status = -ENOTCONN; + } + spin_unlock_irqrestore(&dev->lock, flags); + } else { + skb_queue_tail(&dev->rx_frames, skb); + } + skb = NULL; + + skb2 = skb_dequeue(&dev->rx_frames); + while (skb2) { + if (status < 0 + || ETH_HLEN > skb2->len + || skb2->len > GETHER_MAX_ETH_FRAME_LEN) { + dev->net->stats.rx_errors++; + dev->net->stats.rx_length_errors++; + DBG(dev, "rx length %d\n", skb2->len); + dev_kfree_skb_any(skb2); + goto next_frame; + } + skb2->protocol = eth_type_trans(skb2, dev->net); + dev->net->stats.rx_packets++; + dev->net->stats.rx_bytes += skb2->len; + + /* no buffer copies needed, unless hardware can't + * use skb buffers. + */ + status = netif_rx(skb2); +next_frame: + skb2 = skb_dequeue(&dev->rx_frames); + } + break; + + /* software-driven interface shutdown */ + case -ECONNRESET: /* unlink */ + case -ESHUTDOWN: /* disconnect etc */ + VDBG(dev, "rx shutdown, code %d\n", status); + goto quiesce; + + /* for hardware automagic (such as pxa) */ + case -ECONNABORTED: /* endpoint reset */ + DBG(dev, "rx %s reset\n", ep->name); + defer_kevent(dev, WORK_RX_MEMORY); +quiesce: + dev_kfree_skb_any(skb); + goto clean; + + /* data overrun */ + case -EOVERFLOW: + dev->net->stats.rx_over_errors++; + fallthrough; + + default: + dev->net->stats.rx_errors++; + DBG(dev, "rx status %d\n", status); + break; + } + + if (skb) + dev_kfree_skb_any(skb); + if (!netif_running(dev->net)) { +clean: + spin_lock(&dev->req_lock); + list_add(&req->list, &dev->rx_reqs); + spin_unlock(&dev->req_lock); + req = NULL; + } + if (req) + rx_submit(dev, req, GFP_ATOMIC); +} + +static int prealloc(struct list_head *list, struct usb_ep *ep, unsigned n) +{ + unsigned i; + struct usb_request *req; + + if (!n) + return -ENOMEM; + + /* queue/recycle up to N requests */ + i = n; + list_for_each_entry(req, list, list) { + if (i-- == 0) + goto extra; + } + while (i--) { + req = usb_ep_alloc_request(ep, GFP_ATOMIC); + if (!req) + return list_empty(list) ? -ENOMEM : 0; + list_add(&req->list, list); + } + return 0; + +extra: + /* free extras */ + for (;;) { + struct list_head *next; + + next = req->list.next; + list_del(&req->list); + usb_ep_free_request(ep, req); + + if (next == list) + break; + + req = container_of(next, struct usb_request, list); + } + return 0; +} + +static int alloc_requests(struct eth_dev *dev, struct gether *link, unsigned n) +{ + int status; + + spin_lock(&dev->req_lock); + status = prealloc(&dev->tx_reqs, link->in_ep, n); + if (status < 0) + goto fail; + status = prealloc(&dev->rx_reqs, link->out_ep, n); + if (status < 0) + goto fail; + goto done; +fail: + DBG(dev, "can't alloc requests\n"); +done: + spin_unlock(&dev->req_lock); + return status; +} + +static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags) +{ + struct usb_request *req; + unsigned long flags; + + /* fill unused rxq slots with some skb */ + spin_lock_irqsave(&dev->req_lock, flags); + while (!list_empty(&dev->rx_reqs)) { + req = list_first_entry(&dev->rx_reqs, struct usb_request, list); + list_del_init(&req->list); + spin_unlock_irqrestore(&dev->req_lock, flags); + + if (rx_submit(dev, req, gfp_flags) < 0) { + defer_kevent(dev, WORK_RX_MEMORY); + return; + } + + spin_lock_irqsave(&dev->req_lock, flags); + } + spin_unlock_irqrestore(&dev->req_lock, flags); +} + +static void eth_work(struct work_struct *work) +{ + struct eth_dev *dev = container_of(work, struct eth_dev, work); + + if (test_and_clear_bit(WORK_RX_MEMORY, &dev->todo)) { + if (netif_running(dev->net)) + rx_fill(dev, GFP_KERNEL); + } + + if (dev->todo) + DBG(dev, "work done, flags = 0x%lx\n", dev->todo); +} + +static void tx_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct sk_buff *skb = req->context; + struct eth_dev *dev = ep->driver_data; + + switch (req->status) { + default: + dev->net->stats.tx_errors++; + VDBG(dev, "tx err %d\n", req->status); + fallthrough; + case -ECONNRESET: /* unlink */ + case -ESHUTDOWN: /* disconnect etc */ + dev_kfree_skb_any(skb); + break; + case 0: + dev->net->stats.tx_bytes += skb->len; + dev_consume_skb_any(skb); + } + dev->net->stats.tx_packets++; + + spin_lock(&dev->req_lock); + list_add(&req->list, &dev->tx_reqs); + spin_unlock(&dev->req_lock); + + atomic_dec(&dev->tx_qlen); + if (netif_carrier_ok(dev->net)) + netif_wake_queue(dev->net); +} + +static inline int is_promisc(u16 cdc_filter) +{ + return cdc_filter & USB_CDC_PACKET_TYPE_PROMISCUOUS; +} + +static netdev_tx_t eth_start_xmit(struct sk_buff *skb, + struct net_device *net) +{ + struct eth_dev *dev = netdev_priv(net); + int length = 0; + int retval; + struct usb_request *req = NULL; + unsigned long flags; + struct usb_ep *in; + u16 cdc_filter; + + spin_lock_irqsave(&dev->lock, flags); + if (dev->port_usb) { + in = dev->port_usb->in_ep; + cdc_filter = dev->port_usb->cdc_filter; + } else { + in = NULL; + cdc_filter = 0; + } + spin_unlock_irqrestore(&dev->lock, flags); + + if (!in) { + if (skb) + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + /* apply outgoing CDC or RNDIS filters */ + if (skb && !is_promisc(cdc_filter)) { + u8 *dest = skb->data; + + if (is_multicast_ether_addr(dest)) { + u16 type; + + /* ignores USB_CDC_PACKET_TYPE_MULTICAST and host + * SET_ETHERNET_MULTICAST_FILTERS requests + */ + if (is_broadcast_ether_addr(dest)) + type = USB_CDC_PACKET_TYPE_BROADCAST; + else + type = USB_CDC_PACKET_TYPE_ALL_MULTICAST; + if (!(cdc_filter & type)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + } + /* ignores USB_CDC_PACKET_TYPE_DIRECTED */ + } + + spin_lock_irqsave(&dev->req_lock, flags); + /* + * this freelist can be empty if an interrupt triggered disconnect() + * and reconfigured the gadget (shutting down this queue) after the + * network stack decided to xmit but before we got the spinlock. + */ + if (list_empty(&dev->tx_reqs)) { + spin_unlock_irqrestore(&dev->req_lock, flags); + return NETDEV_TX_BUSY; + } + + req = list_first_entry(&dev->tx_reqs, struct usb_request, list); + list_del(&req->list); + + /* temporarily stop TX queue when the freelist empties */ + if (list_empty(&dev->tx_reqs)) + netif_stop_queue(net); + spin_unlock_irqrestore(&dev->req_lock, flags); + + /* no buffer copies needed, unless the network stack did it + * or the hardware can't use skb buffers. + * or there's not enough space for extra headers we need + */ + if (dev->wrap) { + unsigned long flags; + + spin_lock_irqsave(&dev->lock, flags); + if (dev->port_usb) + skb = dev->wrap(dev->port_usb, skb); + spin_unlock_irqrestore(&dev->lock, flags); + if (!skb) { + /* Multi frame CDC protocols may store the frame for + * later which is not a dropped frame. + */ + if (dev->port_usb && + dev->port_usb->supports_multi_frame) + goto multiframe; + goto drop; + } + } + + length = skb->len; + req->buf = skb->data; + req->context = skb; + req->complete = tx_complete; + + /* NCM requires no zlp if transfer is dwNtbInMaxSize */ + if (dev->port_usb && + dev->port_usb->is_fixed && + length == dev->port_usb->fixed_in_len && + (length % in->maxpacket) == 0) + req->zero = 0; + else + req->zero = 1; + + /* use zlp framing on tx for strict CDC-Ether conformance, + * though any robust network rx path ignores extra padding. + * and some hardware doesn't like to write zlps. + */ + if (req->zero && !dev->zlp && (length % in->maxpacket) == 0) + length++; + + req->length = length; + + retval = usb_ep_queue(in, req, GFP_ATOMIC); + switch (retval) { + default: + DBG(dev, "tx queue err %d\n", retval); + break; + case 0: + netif_trans_update(net); + atomic_inc(&dev->tx_qlen); + } + + if (retval) { + dev_kfree_skb_any(skb); +drop: + dev->net->stats.tx_dropped++; +multiframe: + spin_lock_irqsave(&dev->req_lock, flags); + if (list_empty(&dev->tx_reqs)) + netif_start_queue(net); + list_add(&req->list, &dev->tx_reqs); + spin_unlock_irqrestore(&dev->req_lock, flags); + } + return NETDEV_TX_OK; +} + +/*-------------------------------------------------------------------------*/ + +static void eth_start(struct eth_dev *dev, gfp_t gfp_flags) +{ + DBG(dev, "%s\n", __func__); + + /* fill the rx queue */ + rx_fill(dev, gfp_flags); + + /* and open the tx floodgates */ + atomic_set(&dev->tx_qlen, 0); + netif_wake_queue(dev->net); +} + +static int eth_open(struct net_device *net) +{ + struct eth_dev *dev = netdev_priv(net); + struct gether *link; + + DBG(dev, "%s\n", __func__); + if (netif_carrier_ok(dev->net)) + eth_start(dev, GFP_KERNEL); + + spin_lock_irq(&dev->lock); + link = dev->port_usb; + if (link && link->open) + link->open(link); + spin_unlock_irq(&dev->lock); + + return 0; +} + +static int eth_stop(struct net_device *net) +{ + struct eth_dev *dev = netdev_priv(net); + unsigned long flags; + + VDBG(dev, "%s\n", __func__); + netif_stop_queue(net); + + DBG(dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n", + dev->net->stats.rx_packets, dev->net->stats.tx_packets, + dev->net->stats.rx_errors, dev->net->stats.tx_errors + ); + + /* ensure there are no more active requests */ + spin_lock_irqsave(&dev->lock, flags); + if (dev->port_usb) { + struct gether *link = dev->port_usb; + const struct usb_endpoint_descriptor *in; + const struct usb_endpoint_descriptor *out; + + if (link->close) + link->close(link); + + /* NOTE: we have no abort-queue primitive we could use + * to cancel all pending I/O. Instead, we disable then + * reenable the endpoints ... this idiom may leave toggle + * wrong, but that's a self-correcting error. + * + * REVISIT: we *COULD* just let the transfers complete at + * their own pace; the network stack can handle old packets. + * For the moment we leave this here, since it works. + */ + in = link->in_ep->desc; + out = link->out_ep->desc; + usb_ep_disable(link->in_ep); + usb_ep_disable(link->out_ep); + if (netif_carrier_ok(net)) { + DBG(dev, "host still using in/out endpoints\n"); + link->in_ep->desc = in; + link->out_ep->desc = out; + usb_ep_enable(link->in_ep); + usb_ep_enable(link->out_ep); + } + } + spin_unlock_irqrestore(&dev->lock, flags); + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static int get_ether_addr(const char *str, u8 *dev_addr) +{ + if (str) { + unsigned i; + + for (i = 0; i < 6; i++) { + unsigned char num; + + if ((*str == '.') || (*str == ':')) + str++; + num = hex_to_bin(*str++) << 4; + num |= hex_to_bin(*str++); + dev_addr [i] = num; + } + if (is_valid_ether_addr(dev_addr)) + return 0; + } + eth_random_addr(dev_addr); + return 1; +} + +static int get_ether_addr_str(u8 dev_addr[ETH_ALEN], char *str, int len) +{ + if (len < 18) + return -EINVAL; + + snprintf(str, len, "%pM", dev_addr); + return 18; +} + +static const struct net_device_ops eth_netdev_ops = { + .ndo_open = eth_open, + .ndo_stop = eth_stop, + .ndo_start_xmit = eth_start_xmit, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + +static struct device_type gadget_type = { + .name = "gadget", +}; + +/* + * gether_setup_name - initialize one ethernet-over-usb link + * @g: gadget to associated with these links + * @ethaddr: NULL, or a buffer in which the ethernet address of the + * host side of the link is recorded + * @netname: name for network device (for example, "usb") + * Context: may sleep + * + * This sets up the single network link that may be exported by a + * gadget driver using this framework. The link layer addresses are + * set up using module parameters. + * + * Returns an eth_dev pointer on success, or an ERR_PTR on failure. + */ +struct eth_dev *gether_setup_name(struct usb_gadget *g, + const char *dev_addr, const char *host_addr, + u8 ethaddr[ETH_ALEN], unsigned qmult, const char *netname) +{ + struct eth_dev *dev; + struct net_device *net; + int status; + u8 addr[ETH_ALEN]; + + net = alloc_etherdev(sizeof *dev); + if (!net) + return ERR_PTR(-ENOMEM); + + dev = netdev_priv(net); + spin_lock_init(&dev->lock); + spin_lock_init(&dev->req_lock); + INIT_WORK(&dev->work, eth_work); + INIT_LIST_HEAD(&dev->tx_reqs); + INIT_LIST_HEAD(&dev->rx_reqs); + + skb_queue_head_init(&dev->rx_frames); + + /* network device setup */ + dev->net = net; + dev->qmult = qmult; + snprintf(net->name, sizeof(net->name), "%s%%d", netname); + + if (get_ether_addr(dev_addr, addr)) { + net->addr_assign_type = NET_ADDR_RANDOM; + dev_warn(&g->dev, + "using random %s ethernet address\n", "self"); + } else { + net->addr_assign_type = NET_ADDR_SET; + } + eth_hw_addr_set(net, addr); + if (get_ether_addr(host_addr, dev->host_mac)) + dev_warn(&g->dev, + "using random %s ethernet address\n", "host"); + + if (ethaddr) + memcpy(ethaddr, dev->host_mac, ETH_ALEN); + + net->netdev_ops = ð_netdev_ops; + + net->ethtool_ops = &ops; + + /* MTU range: 14 - 15412 */ + net->min_mtu = ETH_HLEN; + net->max_mtu = GETHER_MAX_MTU_SIZE; + + dev->gadget = g; + SET_NETDEV_DEV(net, &g->dev); + SET_NETDEV_DEVTYPE(net, &gadget_type); + + status = register_netdev(net); + if (status < 0) { + dev_dbg(&g->dev, "register_netdev failed, %d\n", status); + free_netdev(net); + dev = ERR_PTR(status); + } else { + INFO(dev, "MAC %pM\n", net->dev_addr); + INFO(dev, "HOST MAC %pM\n", dev->host_mac); + + /* + * two kinds of host-initiated state changes: + * - iff DATA transfer is active, carrier is "on" + * - tx queueing enabled if open *and* carrier is "on" + */ + netif_carrier_off(net); + } + + return dev; +} +EXPORT_SYMBOL_GPL(gether_setup_name); + +struct net_device *gether_setup_name_default(const char *netname) +{ + struct net_device *net; + struct eth_dev *dev; + + net = alloc_etherdev(sizeof(*dev)); + if (!net) + return ERR_PTR(-ENOMEM); + + dev = netdev_priv(net); + spin_lock_init(&dev->lock); + spin_lock_init(&dev->req_lock); + INIT_WORK(&dev->work, eth_work); + INIT_LIST_HEAD(&dev->tx_reqs); + INIT_LIST_HEAD(&dev->rx_reqs); + + skb_queue_head_init(&dev->rx_frames); + + /* network device setup */ + dev->net = net; + dev->qmult = QMULT_DEFAULT; + snprintf(net->name, sizeof(net->name), "%s%%d", netname); + + eth_random_addr(dev->dev_mac); + pr_warn("using random %s ethernet address\n", "self"); + + /* by default we always have a random MAC address */ + net->addr_assign_type = NET_ADDR_RANDOM; + + eth_random_addr(dev->host_mac); + pr_warn("using random %s ethernet address\n", "host"); + + net->netdev_ops = ð_netdev_ops; + + net->ethtool_ops = &ops; + SET_NETDEV_DEVTYPE(net, &gadget_type); + + /* MTU range: 14 - 15412 */ + net->min_mtu = ETH_HLEN; + net->max_mtu = GETHER_MAX_MTU_SIZE; + + return net; +} +EXPORT_SYMBOL_GPL(gether_setup_name_default); + +int gether_register_netdev(struct net_device *net) +{ + struct eth_dev *dev; + struct usb_gadget *g; + int status; + + if (!net->dev.parent) + return -EINVAL; + dev = netdev_priv(net); + g = dev->gadget; + + eth_hw_addr_set(net, dev->dev_mac); + + status = register_netdev(net); + if (status < 0) { + dev_dbg(&g->dev, "register_netdev failed, %d\n", status); + return status; + } else { + INFO(dev, "HOST MAC %pM\n", dev->host_mac); + INFO(dev, "MAC %pM\n", dev->dev_mac); + + /* two kinds of host-initiated state changes: + * - iff DATA transfer is active, carrier is "on" + * - tx queueing enabled if open *and* carrier is "on" + */ + netif_carrier_off(net); + } + + return status; +} +EXPORT_SYMBOL_GPL(gether_register_netdev); + +void gether_set_gadget(struct net_device *net, struct usb_gadget *g) +{ + struct eth_dev *dev; + + dev = netdev_priv(net); + dev->gadget = g; + SET_NETDEV_DEV(net, &g->dev); +} +EXPORT_SYMBOL_GPL(gether_set_gadget); + +int gether_set_dev_addr(struct net_device *net, const char *dev_addr) +{ + struct eth_dev *dev; + u8 new_addr[ETH_ALEN]; + + dev = netdev_priv(net); + if (get_ether_addr(dev_addr, new_addr)) + return -EINVAL; + memcpy(dev->dev_mac, new_addr, ETH_ALEN); + net->addr_assign_type = NET_ADDR_SET; + return 0; +} +EXPORT_SYMBOL_GPL(gether_set_dev_addr); + +int gether_get_dev_addr(struct net_device *net, char *dev_addr, int len) +{ + struct eth_dev *dev; + int ret; + + dev = netdev_priv(net); + ret = get_ether_addr_str(dev->dev_mac, dev_addr, len); + if (ret + 1 < len) { + dev_addr[ret++] = '\n'; + dev_addr[ret] = '\0'; + } + + return ret; +} +EXPORT_SYMBOL_GPL(gether_get_dev_addr); + +int gether_set_host_addr(struct net_device *net, const char *host_addr) +{ + struct eth_dev *dev; + u8 new_addr[ETH_ALEN]; + + dev = netdev_priv(net); + if (get_ether_addr(host_addr, new_addr)) + return -EINVAL; + memcpy(dev->host_mac, new_addr, ETH_ALEN); + return 0; +} +EXPORT_SYMBOL_GPL(gether_set_host_addr); + +int gether_get_host_addr(struct net_device *net, char *host_addr, int len) +{ + struct eth_dev *dev; + int ret; + + dev = netdev_priv(net); + ret = get_ether_addr_str(dev->host_mac, host_addr, len); + if (ret + 1 < len) { + host_addr[ret++] = '\n'; + host_addr[ret] = '\0'; + } + + return ret; +} +EXPORT_SYMBOL_GPL(gether_get_host_addr); + +int gether_get_host_addr_cdc(struct net_device *net, char *host_addr, int len) +{ + struct eth_dev *dev; + + if (len < 13) + return -EINVAL; + + dev = netdev_priv(net); + snprintf(host_addr, len, "%pm", dev->host_mac); + + string_upper(host_addr, host_addr); + + return strlen(host_addr); +} +EXPORT_SYMBOL_GPL(gether_get_host_addr_cdc); + +void gether_get_host_addr_u8(struct net_device *net, u8 host_mac[ETH_ALEN]) +{ + struct eth_dev *dev; + + dev = netdev_priv(net); + memcpy(host_mac, dev->host_mac, ETH_ALEN); +} +EXPORT_SYMBOL_GPL(gether_get_host_addr_u8); + +void gether_set_qmult(struct net_device *net, unsigned qmult) +{ + struct eth_dev *dev; + + dev = netdev_priv(net); + dev->qmult = qmult; +} +EXPORT_SYMBOL_GPL(gether_set_qmult); + +unsigned gether_get_qmult(struct net_device *net) +{ + struct eth_dev *dev; + + dev = netdev_priv(net); + return dev->qmult; +} +EXPORT_SYMBOL_GPL(gether_get_qmult); + +int gether_get_ifname(struct net_device *net, char *name, int len) +{ + struct eth_dev *dev = netdev_priv(net); + int ret; + + rtnl_lock(); + ret = scnprintf(name, len, "%s\n", + dev->ifname_set ? net->name : netdev_name(net)); + rtnl_unlock(); + return ret; +} +EXPORT_SYMBOL_GPL(gether_get_ifname); + +int gether_set_ifname(struct net_device *net, const char *name, int len) +{ + struct eth_dev *dev = netdev_priv(net); + char tmp[IFNAMSIZ]; + const char *p; + + if (name[len - 1] == '\n') + len--; + + if (len >= sizeof(tmp)) + return -E2BIG; + + strscpy(tmp, name, len + 1); + if (!dev_valid_name(tmp)) + return -EINVAL; + + /* Require exactly one %d, so binding will not fail with EEXIST. */ + p = strchr(name, '%'); + if (!p || p[1] != 'd' || strchr(p + 2, '%')) + return -EINVAL; + + strncpy(net->name, tmp, sizeof(net->name)); + dev->ifname_set = true; + + return 0; +} +EXPORT_SYMBOL_GPL(gether_set_ifname); + +/* + * gether_cleanup - remove Ethernet-over-USB device + * Context: may sleep + * + * This is called to free all resources allocated by @gether_setup(). + */ +void gether_cleanup(struct eth_dev *dev) +{ + if (!dev) + return; + + unregister_netdev(dev->net); + flush_work(&dev->work); + free_netdev(dev->net); +} +EXPORT_SYMBOL_GPL(gether_cleanup); + +/** + * gether_connect - notify network layer that USB link is active + * @link: the USB link, set up with endpoints, descriptors matching + * current device speed, and any framing wrapper(s) set up. + * Context: irqs blocked + * + * This is called to activate endpoints and let the network layer know + * the connection is active ("carrier detect"). It may cause the I/O + * queues to open and start letting network packets flow, but will in + * any case activate the endpoints so that they respond properly to the + * USB host. + * + * Verify net_device pointer returned using IS_ERR(). If it doesn't + * indicate some error code (negative errno), ep->driver_data values + * have been overwritten. + */ +struct net_device *gether_connect(struct gether *link) +{ + struct eth_dev *dev = link->ioport; + int result = 0; + + if (!dev) + return ERR_PTR(-EINVAL); + + link->in_ep->driver_data = dev; + result = usb_ep_enable(link->in_ep); + if (result != 0) { + DBG(dev, "enable %s --> %d\n", + link->in_ep->name, result); + goto fail0; + } + + link->out_ep->driver_data = dev; + result = usb_ep_enable(link->out_ep); + if (result != 0) { + DBG(dev, "enable %s --> %d\n", + link->out_ep->name, result); + goto fail1; + } + + if (result == 0) + result = alloc_requests(dev, link, qlen(dev->gadget, + dev->qmult)); + + if (result == 0) { + dev->zlp = link->is_zlp_ok; + dev->no_skb_reserve = gadget_avoids_skb_reserve(dev->gadget); + DBG(dev, "qlen %d\n", qlen(dev->gadget, dev->qmult)); + + dev->header_len = link->header_len; + dev->unwrap = link->unwrap; + dev->wrap = link->wrap; + + spin_lock(&dev->lock); + dev->port_usb = link; + if (netif_running(dev->net)) { + if (link->open) + link->open(link); + } else { + if (link->close) + link->close(link); + } + spin_unlock(&dev->lock); + + netif_carrier_on(dev->net); + if (netif_running(dev->net)) + eth_start(dev, GFP_ATOMIC); + + /* on error, disable any endpoints */ + } else { + (void) usb_ep_disable(link->out_ep); +fail1: + (void) usb_ep_disable(link->in_ep); + } +fail0: + /* caller is responsible for cleanup on error */ + if (result < 0) + return ERR_PTR(result); + return dev->net; +} +EXPORT_SYMBOL_GPL(gether_connect); + +/** + * gether_disconnect - notify network layer that USB link is inactive + * @link: the USB link, on which gether_connect() was called + * Context: irqs blocked + * + * This is called to deactivate endpoints and let the network layer know + * the connection went inactive ("no carrier"). + * + * On return, the state is as if gether_connect() had never been called. + * The endpoints are inactive, and accordingly without active USB I/O. + * Pointers to endpoint descriptors and endpoint private data are nulled. + */ +void gether_disconnect(struct gether *link) +{ + struct eth_dev *dev = link->ioport; + struct usb_request *req; + + WARN_ON(!dev); + if (!dev) + return; + + DBG(dev, "%s\n", __func__); + + netif_stop_queue(dev->net); + netif_carrier_off(dev->net); + + /* disable endpoints, forcing (synchronous) completion + * of all pending i/o. then free the request objects + * and forget about the endpoints. + */ + usb_ep_disable(link->in_ep); + spin_lock(&dev->req_lock); + while (!list_empty(&dev->tx_reqs)) { + req = list_first_entry(&dev->tx_reqs, struct usb_request, list); + list_del(&req->list); + + spin_unlock(&dev->req_lock); + usb_ep_free_request(link->in_ep, req); + spin_lock(&dev->req_lock); + } + spin_unlock(&dev->req_lock); + link->in_ep->desc = NULL; + + usb_ep_disable(link->out_ep); + spin_lock(&dev->req_lock); + while (!list_empty(&dev->rx_reqs)) { + req = list_first_entry(&dev->rx_reqs, struct usb_request, list); + list_del(&req->list); + + spin_unlock(&dev->req_lock); + usb_ep_free_request(link->out_ep, req); + spin_lock(&dev->req_lock); + } + spin_unlock(&dev->req_lock); + link->out_ep->desc = NULL; + + /* finish forgetting about this USB link episode */ + dev->header_len = 0; + dev->unwrap = NULL; + dev->wrap = NULL; + + spin_lock(&dev->lock); + dev->port_usb = NULL; + spin_unlock(&dev->lock); +} +EXPORT_SYMBOL_GPL(gether_disconnect); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Brownell"); |