diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/usb/gadget/udc/aspeed-vhub/hub.c | 1082 |
1 files changed, 1082 insertions, 0 deletions
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/hub.c b/drivers/usb/gadget/udc/aspeed-vhub/hub.c new file mode 100644 index 000000000..e2207d014 --- /dev/null +++ b/drivers/usb/gadget/udc/aspeed-vhub/hub.c @@ -0,0 +1,1082 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget + * + * hub.c - virtual hub handling + * + * Copyright 2017 IBM Corporation + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/prefetch.h> +#include <linux/clk.h> +#include <linux/usb/gadget.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/dma-mapping.h> +#include <linux/bcd.h> +#include <linux/version.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> + +#include "vhub.h" + +/* usb 2.0 hub device descriptor + * + * A few things we may want to improve here: + * + * - We may need to indicate TT support + * - We may need a device qualifier descriptor + * as devices can pretend to be usb1 or 2 + * - Make vid/did overridable + * - make it look like usb1 if usb1 mode forced + */ +#define KERNEL_REL bin2bcd(LINUX_VERSION_MAJOR) +#define KERNEL_VER bin2bcd(LINUX_VERSION_PATCHLEVEL) + +enum { + AST_VHUB_STR_INDEX_MAX = 4, + AST_VHUB_STR_MANUF = 3, + AST_VHUB_STR_PRODUCT = 2, + AST_VHUB_STR_SERIAL = 1, +}; + +static const struct usb_device_descriptor ast_vhub_dev_desc = { + .bLength = USB_DT_DEVICE_SIZE, + .bDescriptorType = USB_DT_DEVICE, + .bcdUSB = cpu_to_le16(0x0200), + .bDeviceClass = USB_CLASS_HUB, + .bDeviceSubClass = 0, + .bDeviceProtocol = 1, + .bMaxPacketSize0 = 64, + .idVendor = cpu_to_le16(0x1d6b), + .idProduct = cpu_to_le16(0x0107), + .bcdDevice = cpu_to_le16(0x0100), + .iManufacturer = AST_VHUB_STR_MANUF, + .iProduct = AST_VHUB_STR_PRODUCT, + .iSerialNumber = AST_VHUB_STR_SERIAL, + .bNumConfigurations = 1, +}; + +static const struct usb_qualifier_descriptor ast_vhub_qual_desc = { + .bLength = 0xA, + .bDescriptorType = USB_DT_DEVICE_QUALIFIER, + .bcdUSB = cpu_to_le16(0x0200), + .bDeviceClass = USB_CLASS_HUB, + .bDeviceSubClass = 0, + .bDeviceProtocol = 0, + .bMaxPacketSize0 = 64, + .bNumConfigurations = 1, + .bRESERVED = 0, +}; + +/* + * Configuration descriptor: same comments as above + * regarding handling USB1 mode. + */ + +/* + * We don't use sizeof() as Linux definition of + * struct usb_endpoint_descriptor contains 2 + * extra bytes + */ +#define AST_VHUB_CONF_DESC_SIZE (USB_DT_CONFIG_SIZE + \ + USB_DT_INTERFACE_SIZE + \ + USB_DT_ENDPOINT_SIZE) + +static const struct ast_vhub_full_cdesc ast_vhub_conf_desc = { + .cfg = { + .bLength = USB_DT_CONFIG_SIZE, + .bDescriptorType = USB_DT_CONFIG, + .wTotalLength = cpu_to_le16(AST_VHUB_CONF_DESC_SIZE), + .bNumInterfaces = 1, + .bConfigurationValue = 1, + .iConfiguration = 0, + .bmAttributes = USB_CONFIG_ATT_ONE | + USB_CONFIG_ATT_SELFPOWER | + USB_CONFIG_ATT_WAKEUP, + .bMaxPower = 0, + }, + .intf = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = 0, + .bAlternateSetting = 0, + .bNumEndpoints = 1, + .bInterfaceClass = USB_CLASS_HUB, + .bInterfaceSubClass = 0, + .bInterfaceProtocol = 0, + .iInterface = 0, + }, + .ep = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 0x81, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = cpu_to_le16(1), + .bInterval = 0x0c, + }, +}; + +#define AST_VHUB_HUB_DESC_SIZE (USB_DT_HUB_NONVAR_SIZE + 2) + +static const struct usb_hub_descriptor ast_vhub_hub_desc = { + .bDescLength = AST_VHUB_HUB_DESC_SIZE, + .bDescriptorType = USB_DT_HUB, + .bNbrPorts = AST_VHUB_NUM_PORTS, + .wHubCharacteristics = cpu_to_le16(HUB_CHAR_NO_LPSM), + .bPwrOn2PwrGood = 10, + .bHubContrCurrent = 0, + .u.hs.DeviceRemovable[0] = 0, + .u.hs.DeviceRemovable[1] = 0xff, +}; + +/* + * These strings converted to UTF-16 must be smaller than + * our EP0 buffer. + */ +static const struct usb_string ast_vhub_str_array[] = { + { + .id = AST_VHUB_STR_SERIAL, + .s = "00000000" + }, + { + .id = AST_VHUB_STR_PRODUCT, + .s = "USB Virtual Hub" + }, + { + .id = AST_VHUB_STR_MANUF, + .s = "Aspeed" + }, + { } +}; + +static const struct usb_gadget_strings ast_vhub_strings = { + .language = 0x0409, + .strings = (struct usb_string *)ast_vhub_str_array +}; + +static int ast_vhub_hub_dev_status(struct ast_vhub_ep *ep, + u16 wIndex, u16 wValue) +{ + u8 st0; + + EPDBG(ep, "GET_STATUS(dev)\n"); + + /* + * Mark it as self-powered, I doubt the BMC is powered off + * the USB bus ... + */ + st0 = 1 << USB_DEVICE_SELF_POWERED; + + /* + * Need to double check how remote wakeup actually works + * on that chip and what triggers it. + */ + if (ep->vhub->wakeup_en) + st0 |= 1 << USB_DEVICE_REMOTE_WAKEUP; + + return ast_vhub_simple_reply(ep, st0, 0); +} + +static int ast_vhub_hub_ep_status(struct ast_vhub_ep *ep, + u16 wIndex, u16 wValue) +{ + int ep_num; + u8 st0 = 0; + + ep_num = wIndex & USB_ENDPOINT_NUMBER_MASK; + EPDBG(ep, "GET_STATUS(ep%d)\n", ep_num); + + /* On the hub we have only EP 0 and 1 */ + if (ep_num == 1) { + if (ep->vhub->ep1_stalled) + st0 |= 1 << USB_ENDPOINT_HALT; + } else if (ep_num != 0) + return std_req_stall; + + return ast_vhub_simple_reply(ep, st0, 0); +} + +static int ast_vhub_hub_dev_feature(struct ast_vhub_ep *ep, + u16 wIndex, u16 wValue, + bool is_set) +{ + u32 val; + + EPDBG(ep, "%s_FEATURE(dev val=%02x)\n", + is_set ? "SET" : "CLEAR", wValue); + + if (wValue == USB_DEVICE_REMOTE_WAKEUP) { + ep->vhub->wakeup_en = is_set; + EPDBG(ep, "Hub remote wakeup %s\n", + is_set ? "enabled" : "disabled"); + return std_req_complete; + } + + if (wValue == USB_DEVICE_TEST_MODE) { + val = readl(ep->vhub->regs + AST_VHUB_CTRL); + val &= ~GENMASK(10, 8); + val |= VHUB_CTRL_SET_TEST_MODE((wIndex >> 8) & 0x7); + writel(val, ep->vhub->regs + AST_VHUB_CTRL); + + return std_req_complete; + } + + return std_req_stall; +} + +static int ast_vhub_hub_ep_feature(struct ast_vhub_ep *ep, + u16 wIndex, u16 wValue, + bool is_set) +{ + int ep_num; + u32 reg; + + ep_num = wIndex & USB_ENDPOINT_NUMBER_MASK; + EPDBG(ep, "%s_FEATURE(ep%d val=%02x)\n", + is_set ? "SET" : "CLEAR", ep_num, wValue); + + if (ep_num > 1) + return std_req_stall; + if (wValue != USB_ENDPOINT_HALT) + return std_req_stall; + if (ep_num == 0) + return std_req_complete; + + EPDBG(ep, "%s stall on EP 1\n", + is_set ? "setting" : "clearing"); + + ep->vhub->ep1_stalled = is_set; + reg = readl(ep->vhub->regs + AST_VHUB_EP1_CTRL); + if (is_set) { + reg |= VHUB_EP1_CTRL_STALL; + } else { + reg &= ~VHUB_EP1_CTRL_STALL; + reg |= VHUB_EP1_CTRL_RESET_TOGGLE; + } + writel(reg, ep->vhub->regs + AST_VHUB_EP1_CTRL); + + return std_req_complete; +} + +static int ast_vhub_rep_desc(struct ast_vhub_ep *ep, + u8 desc_type, u16 len) +{ + size_t dsize; + struct ast_vhub *vhub = ep->vhub; + + EPDBG(ep, "GET_DESCRIPTOR(type:%d)\n", desc_type); + + /* + * Copy first to EP buffer and send from there, so + * we can do some in-place patching if needed. We know + * the EP buffer is big enough but ensure that doesn't + * change. We do that now rather than later after we + * have checked sizes etc... to avoid a gcc bug where + * it thinks len is constant and barfs about read + * overflows in memcpy. + */ + switch(desc_type) { + case USB_DT_DEVICE: + dsize = USB_DT_DEVICE_SIZE; + memcpy(ep->buf, &vhub->vhub_dev_desc, dsize); + BUILD_BUG_ON(dsize > sizeof(vhub->vhub_dev_desc)); + BUILD_BUG_ON(USB_DT_DEVICE_SIZE >= AST_VHUB_EP0_MAX_PACKET); + break; + case USB_DT_OTHER_SPEED_CONFIG: + case USB_DT_CONFIG: + dsize = AST_VHUB_CONF_DESC_SIZE; + memcpy(ep->buf, &vhub->vhub_conf_desc, dsize); + ((u8 *)ep->buf)[1] = desc_type; + BUILD_BUG_ON(dsize > sizeof(vhub->vhub_conf_desc)); + BUILD_BUG_ON(AST_VHUB_CONF_DESC_SIZE >= AST_VHUB_EP0_MAX_PACKET); + break; + case USB_DT_HUB: + dsize = AST_VHUB_HUB_DESC_SIZE; + memcpy(ep->buf, &vhub->vhub_hub_desc, dsize); + BUILD_BUG_ON(dsize > sizeof(vhub->vhub_hub_desc)); + BUILD_BUG_ON(AST_VHUB_HUB_DESC_SIZE >= AST_VHUB_EP0_MAX_PACKET); + break; + case USB_DT_DEVICE_QUALIFIER: + dsize = sizeof(vhub->vhub_qual_desc); + memcpy(ep->buf, &vhub->vhub_qual_desc, dsize); + break; + default: + return std_req_stall; + } + + /* Crop requested length */ + if (len > dsize) + len = dsize; + + /* Shoot it from the EP buffer */ + return ast_vhub_reply(ep, NULL, len); +} + +static struct usb_gadget_strings* +ast_vhub_str_of_container(struct usb_gadget_string_container *container) +{ + return (struct usb_gadget_strings *)container->stash; +} + +static int ast_vhub_collect_languages(struct ast_vhub *vhub, void *buf, + size_t size) +{ + int rc, hdr_len, nlangs, max_langs; + struct usb_gadget_strings *lang_str; + struct usb_gadget_string_container *container; + struct usb_string_descriptor *sdesc = buf; + + nlangs = 0; + hdr_len = sizeof(struct usb_descriptor_header); + max_langs = (size - hdr_len) / sizeof(sdesc->wData[0]); + list_for_each_entry(container, &vhub->vhub_str_desc, list) { + if (nlangs >= max_langs) + break; + + lang_str = ast_vhub_str_of_container(container); + sdesc->wData[nlangs++] = cpu_to_le16(lang_str->language); + } + + rc = hdr_len + nlangs * sizeof(sdesc->wData[0]); + sdesc->bLength = rc; + sdesc->bDescriptorType = USB_DT_STRING; + + return rc; +} + +static struct usb_gadget_strings *ast_vhub_lookup_string(struct ast_vhub *vhub, + u16 lang_id) +{ + struct usb_gadget_strings *lang_str; + struct usb_gadget_string_container *container; + + list_for_each_entry(container, &vhub->vhub_str_desc, list) { + lang_str = ast_vhub_str_of_container(container); + if (lang_str->language == lang_id) + return lang_str; + } + + return NULL; +} + +static int ast_vhub_rep_string(struct ast_vhub_ep *ep, + u8 string_id, u16 lang_id, + u16 len) +{ + int rc; + u8 buf[256]; + struct ast_vhub *vhub = ep->vhub; + struct usb_gadget_strings *lang_str; + + if (string_id == 0) { + rc = ast_vhub_collect_languages(vhub, buf, sizeof(buf)); + } else { + lang_str = ast_vhub_lookup_string(vhub, lang_id); + if (!lang_str) + return std_req_stall; + + rc = usb_gadget_get_string(lang_str, string_id, buf); + } + + if (rc < 0 || rc >= AST_VHUB_EP0_MAX_PACKET) + return std_req_stall; + + /* Shoot it from the EP buffer */ + memcpy(ep->buf, buf, rc); + return ast_vhub_reply(ep, NULL, min_t(u16, rc, len)); +} + +enum std_req_rc ast_vhub_std_hub_request(struct ast_vhub_ep *ep, + struct usb_ctrlrequest *crq) +{ + struct ast_vhub *vhub = ep->vhub; + u16 wValue, wIndex, wLength; + + wValue = le16_to_cpu(crq->wValue); + wIndex = le16_to_cpu(crq->wIndex); + wLength = le16_to_cpu(crq->wLength); + + /* First packet, grab speed */ + if (vhub->speed == USB_SPEED_UNKNOWN) { + u32 ustat = readl(vhub->regs + AST_VHUB_USBSTS); + if (ustat & VHUB_USBSTS_HISPEED) + vhub->speed = USB_SPEED_HIGH; + else + vhub->speed = USB_SPEED_FULL; + UDCDBG(vhub, "USB status=%08x speed=%s\n", ustat, + vhub->speed == USB_SPEED_HIGH ? "high" : "full"); + } + + switch ((crq->bRequestType << 8) | crq->bRequest) { + /* SET_ADDRESS */ + case DeviceOutRequest | USB_REQ_SET_ADDRESS: + EPDBG(ep, "SET_ADDRESS: Got address %x\n", wValue); + writel(wValue, vhub->regs + AST_VHUB_CONF); + return std_req_complete; + + /* GET_STATUS */ + case DeviceRequest | USB_REQ_GET_STATUS: + return ast_vhub_hub_dev_status(ep, wIndex, wValue); + case InterfaceRequest | USB_REQ_GET_STATUS: + return ast_vhub_simple_reply(ep, 0, 0); + case EndpointRequest | USB_REQ_GET_STATUS: + return ast_vhub_hub_ep_status(ep, wIndex, wValue); + + /* SET/CLEAR_FEATURE */ + case DeviceOutRequest | USB_REQ_SET_FEATURE: + return ast_vhub_hub_dev_feature(ep, wIndex, wValue, true); + case DeviceOutRequest | USB_REQ_CLEAR_FEATURE: + return ast_vhub_hub_dev_feature(ep, wIndex, wValue, false); + case EndpointOutRequest | USB_REQ_SET_FEATURE: + return ast_vhub_hub_ep_feature(ep, wIndex, wValue, true); + case EndpointOutRequest | USB_REQ_CLEAR_FEATURE: + return ast_vhub_hub_ep_feature(ep, wIndex, wValue, false); + + /* GET/SET_CONFIGURATION */ + case DeviceRequest | USB_REQ_GET_CONFIGURATION: + return ast_vhub_simple_reply(ep, 1); + case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: + if (wValue != 1) + return std_req_stall; + return std_req_complete; + + /* GET_DESCRIPTOR */ + case DeviceRequest | USB_REQ_GET_DESCRIPTOR: + switch (wValue >> 8) { + case USB_DT_DEVICE: + case USB_DT_CONFIG: + case USB_DT_DEVICE_QUALIFIER: + case USB_DT_OTHER_SPEED_CONFIG: + return ast_vhub_rep_desc(ep, wValue >> 8, + wLength); + case USB_DT_STRING: + return ast_vhub_rep_string(ep, wValue & 0xff, + wIndex, wLength); + } + return std_req_stall; + + /* GET/SET_INTERFACE */ + case DeviceRequest | USB_REQ_GET_INTERFACE: + return ast_vhub_simple_reply(ep, 0); + case DeviceOutRequest | USB_REQ_SET_INTERFACE: + if (wValue != 0 || wIndex != 0) + return std_req_stall; + return std_req_complete; + } + return std_req_stall; +} + +static void ast_vhub_update_hub_ep1(struct ast_vhub *vhub, + unsigned int port) +{ + /* Update HW EP1 response */ + u32 reg = readl(vhub->regs + AST_VHUB_EP1_STS_CHG); + u32 pmask = (1 << (port + 1)); + if (vhub->ports[port].change) + reg |= pmask; + else + reg &= ~pmask; + writel(reg, vhub->regs + AST_VHUB_EP1_STS_CHG); +} + +static void ast_vhub_change_port_stat(struct ast_vhub *vhub, + unsigned int port, + u16 clr_flags, + u16 set_flags, + bool set_c) +{ + struct ast_vhub_port *p = &vhub->ports[port]; + u16 prev; + + /* Update port status */ + prev = p->status; + p->status = (prev & ~clr_flags) | set_flags; + DDBG(&p->dev, "port %d status %04x -> %04x (C=%d)\n", + port + 1, prev, p->status, set_c); + + /* Update change bits if needed */ + if (set_c) { + u16 chg = p->status ^ prev; + + /* Only these are relevant for change */ + chg &= USB_PORT_STAT_C_CONNECTION | + USB_PORT_STAT_C_ENABLE | + USB_PORT_STAT_C_SUSPEND | + USB_PORT_STAT_C_OVERCURRENT | + USB_PORT_STAT_C_RESET | + USB_PORT_STAT_C_L1; + + /* + * We only set USB_PORT_STAT_C_ENABLE if we are disabling + * the port as per USB spec, otherwise MacOS gets upset + */ + if (p->status & USB_PORT_STAT_ENABLE) + chg &= ~USB_PORT_STAT_C_ENABLE; + + p->change = chg; + ast_vhub_update_hub_ep1(vhub, port); + } +} + +static void ast_vhub_send_host_wakeup(struct ast_vhub *vhub) +{ + u32 reg = readl(vhub->regs + AST_VHUB_CTRL); + UDCDBG(vhub, "Waking up host !\n"); + reg |= VHUB_CTRL_MANUAL_REMOTE_WAKEUP; + writel(reg, vhub->regs + AST_VHUB_CTRL); +} + +void ast_vhub_device_connect(struct ast_vhub *vhub, + unsigned int port, bool on) +{ + if (on) + ast_vhub_change_port_stat(vhub, port, 0, + USB_PORT_STAT_CONNECTION, true); + else + ast_vhub_change_port_stat(vhub, port, + USB_PORT_STAT_CONNECTION | + USB_PORT_STAT_ENABLE, + 0, true); + + /* + * If the hub is set to wakup the host on connection events + * then send a wakeup. + */ + if (vhub->wakeup_en) + ast_vhub_send_host_wakeup(vhub); +} + +static void ast_vhub_wake_work(struct work_struct *work) +{ + struct ast_vhub *vhub = container_of(work, + struct ast_vhub, + wake_work); + unsigned long flags; + unsigned int i; + + /* + * Wake all sleeping ports. If a port is suspended by + * the host suspend (without explicit state suspend), + * we let the normal host wake path deal with it later. + */ + spin_lock_irqsave(&vhub->lock, flags); + for (i = 0; i < vhub->max_ports; i++) { + struct ast_vhub_port *p = &vhub->ports[i]; + + if (!(p->status & USB_PORT_STAT_SUSPEND)) + continue; + ast_vhub_change_port_stat(vhub, i, + USB_PORT_STAT_SUSPEND, + 0, true); + ast_vhub_dev_resume(&p->dev); + } + ast_vhub_send_host_wakeup(vhub); + spin_unlock_irqrestore(&vhub->lock, flags); +} + +void ast_vhub_hub_wake_all(struct ast_vhub *vhub) +{ + /* + * A device is trying to wake the world, because this + * can recurse into the device, we break the call chain + * using a work queue + */ + schedule_work(&vhub->wake_work); +} + +static void ast_vhub_port_reset(struct ast_vhub *vhub, u8 port) +{ + struct ast_vhub_port *p = &vhub->ports[port]; + u16 set, clr, speed; + + /* First mark disabled */ + ast_vhub_change_port_stat(vhub, port, + USB_PORT_STAT_ENABLE | + USB_PORT_STAT_SUSPEND, + USB_PORT_STAT_RESET, + false); + + if (!p->dev.driver) + return; + + /* + * This will either "start" the port or reset the + * device if already started... + */ + ast_vhub_dev_reset(&p->dev); + + /* Grab the right speed */ + speed = p->dev.driver->max_speed; + if (speed == USB_SPEED_UNKNOWN || speed > vhub->speed) + speed = vhub->speed; + + switch (speed) { + case USB_SPEED_LOW: + set = USB_PORT_STAT_LOW_SPEED; + clr = USB_PORT_STAT_HIGH_SPEED; + break; + case USB_SPEED_FULL: + set = 0; + clr = USB_PORT_STAT_LOW_SPEED | + USB_PORT_STAT_HIGH_SPEED; + break; + case USB_SPEED_HIGH: + set = USB_PORT_STAT_HIGH_SPEED; + clr = USB_PORT_STAT_LOW_SPEED; + break; + default: + UDCDBG(vhub, "Unsupported speed %d when" + " connecting device\n", + speed); + return; + } + clr |= USB_PORT_STAT_RESET; + set |= USB_PORT_STAT_ENABLE; + + /* This should ideally be delayed ... */ + ast_vhub_change_port_stat(vhub, port, clr, set, true); +} + +static enum std_req_rc ast_vhub_set_port_feature(struct ast_vhub_ep *ep, + u8 port, u16 feat) +{ + struct ast_vhub *vhub = ep->vhub; + struct ast_vhub_port *p; + + if (port == 0 || port > vhub->max_ports) + return std_req_stall; + port--; + p = &vhub->ports[port]; + + switch(feat) { + case USB_PORT_FEAT_SUSPEND: + if (!(p->status & USB_PORT_STAT_ENABLE)) + return std_req_complete; + ast_vhub_change_port_stat(vhub, port, + 0, USB_PORT_STAT_SUSPEND, + false); + ast_vhub_dev_suspend(&p->dev); + return std_req_complete; + case USB_PORT_FEAT_RESET: + EPDBG(ep, "Port reset !\n"); + ast_vhub_port_reset(vhub, port); + return std_req_complete; + case USB_PORT_FEAT_POWER: + /* + * On Power-on, we mark the connected flag changed, + * if there's a connected device, some hosts will + * otherwise fail to detect it. + */ + if (p->status & USB_PORT_STAT_CONNECTION) { + p->change |= USB_PORT_STAT_C_CONNECTION; + ast_vhub_update_hub_ep1(vhub, port); + } + return std_req_complete; + case USB_PORT_FEAT_TEST: + case USB_PORT_FEAT_INDICATOR: + /* We don't do anything with these */ + return std_req_complete; + } + return std_req_stall; +} + +static enum std_req_rc ast_vhub_clr_port_feature(struct ast_vhub_ep *ep, + u8 port, u16 feat) +{ + struct ast_vhub *vhub = ep->vhub; + struct ast_vhub_port *p; + + if (port == 0 || port > vhub->max_ports) + return std_req_stall; + port--; + p = &vhub->ports[port]; + + switch(feat) { + case USB_PORT_FEAT_ENABLE: + ast_vhub_change_port_stat(vhub, port, + USB_PORT_STAT_ENABLE | + USB_PORT_STAT_SUSPEND, 0, + false); + ast_vhub_dev_suspend(&p->dev); + return std_req_complete; + case USB_PORT_FEAT_SUSPEND: + if (!(p->status & USB_PORT_STAT_SUSPEND)) + return std_req_complete; + ast_vhub_change_port_stat(vhub, port, + USB_PORT_STAT_SUSPEND, 0, + false); + ast_vhub_dev_resume(&p->dev); + return std_req_complete; + case USB_PORT_FEAT_POWER: + /* We don't do power control */ + return std_req_complete; + case USB_PORT_FEAT_INDICATOR: + /* We don't have indicators */ + return std_req_complete; + case USB_PORT_FEAT_C_CONNECTION: + case USB_PORT_FEAT_C_ENABLE: + case USB_PORT_FEAT_C_SUSPEND: + case USB_PORT_FEAT_C_OVER_CURRENT: + case USB_PORT_FEAT_C_RESET: + /* Clear state-change feature */ + p->change &= ~(1u << (feat - 16)); + ast_vhub_update_hub_ep1(vhub, port); + return std_req_complete; + } + return std_req_stall; +} + +static enum std_req_rc ast_vhub_get_port_stat(struct ast_vhub_ep *ep, + u8 port) +{ + struct ast_vhub *vhub = ep->vhub; + u16 stat, chg; + + if (port == 0 || port > vhub->max_ports) + return std_req_stall; + port--; + + stat = vhub->ports[port].status; + chg = vhub->ports[port].change; + + /* We always have power */ + stat |= USB_PORT_STAT_POWER; + + EPDBG(ep, " port status=%04x change=%04x\n", stat, chg); + + return ast_vhub_simple_reply(ep, + stat & 0xff, + stat >> 8, + chg & 0xff, + chg >> 8); +} + +enum std_req_rc ast_vhub_class_hub_request(struct ast_vhub_ep *ep, + struct usb_ctrlrequest *crq) +{ + u16 wValue, wIndex, wLength; + + wValue = le16_to_cpu(crq->wValue); + wIndex = le16_to_cpu(crq->wIndex); + wLength = le16_to_cpu(crq->wLength); + + switch ((crq->bRequestType << 8) | crq->bRequest) { + case GetHubStatus: + EPDBG(ep, "GetHubStatus\n"); + return ast_vhub_simple_reply(ep, 0, 0, 0, 0); + case GetPortStatus: + EPDBG(ep, "GetPortStatus(%d)\n", wIndex & 0xff); + return ast_vhub_get_port_stat(ep, wIndex & 0xf); + case GetHubDescriptor: + if (wValue != (USB_DT_HUB << 8)) + return std_req_stall; + EPDBG(ep, "GetHubDescriptor(%d)\n", wIndex & 0xff); + return ast_vhub_rep_desc(ep, USB_DT_HUB, wLength); + case SetHubFeature: + case ClearHubFeature: + EPDBG(ep, "Get/SetHubFeature(%d)\n", wValue); + /* No feature, just complete the requests */ + if (wValue == C_HUB_LOCAL_POWER || + wValue == C_HUB_OVER_CURRENT) + return std_req_complete; + return std_req_stall; + case SetPortFeature: + EPDBG(ep, "SetPortFeature(%d,%d)\n", wIndex & 0xf, wValue); + return ast_vhub_set_port_feature(ep, wIndex & 0xf, wValue); + case ClearPortFeature: + EPDBG(ep, "ClearPortFeature(%d,%d)\n", wIndex & 0xf, wValue); + return ast_vhub_clr_port_feature(ep, wIndex & 0xf, wValue); + case ClearTTBuffer: + case ResetTT: + case StopTT: + return std_req_complete; + case GetTTState: + return ast_vhub_simple_reply(ep, 0, 0, 0, 0); + default: + EPDBG(ep, "Unknown class request\n"); + } + return std_req_stall; +} + +void ast_vhub_hub_suspend(struct ast_vhub *vhub) +{ + unsigned int i; + + UDCDBG(vhub, "USB bus suspend\n"); + + if (vhub->suspended) + return; + + vhub->suspended = true; + + /* + * Forward to unsuspended ports without changing + * their connection status. + */ + for (i = 0; i < vhub->max_ports; i++) { + struct ast_vhub_port *p = &vhub->ports[i]; + + if (!(p->status & USB_PORT_STAT_SUSPEND)) + ast_vhub_dev_suspend(&p->dev); + } +} + +void ast_vhub_hub_resume(struct ast_vhub *vhub) +{ + unsigned int i; + + UDCDBG(vhub, "USB bus resume\n"); + + if (!vhub->suspended) + return; + + vhub->suspended = false; + + /* + * Forward to unsuspended ports without changing + * their connection status. + */ + for (i = 0; i < vhub->max_ports; i++) { + struct ast_vhub_port *p = &vhub->ports[i]; + + if (!(p->status & USB_PORT_STAT_SUSPEND)) + ast_vhub_dev_resume(&p->dev); + } +} + +void ast_vhub_hub_reset(struct ast_vhub *vhub) +{ + unsigned int i; + + UDCDBG(vhub, "USB bus reset\n"); + + /* + * Is the speed known ? If not we don't care, we aren't + * initialized yet and ports haven't been enabled. + */ + if (vhub->speed == USB_SPEED_UNKNOWN) + return; + + /* We aren't suspended anymore obviously */ + vhub->suspended = false; + + /* No speed set */ + vhub->speed = USB_SPEED_UNKNOWN; + + /* Wakeup not enabled anymore */ + vhub->wakeup_en = false; + + /* + * Clear all port status, disable gadgets and "suspend" + * them. They will be woken up by a port reset. + */ + for (i = 0; i < vhub->max_ports; i++) { + struct ast_vhub_port *p = &vhub->ports[i]; + + /* Only keep the connected flag */ + p->status &= USB_PORT_STAT_CONNECTION; + p->change = 0; + + /* Suspend the gadget if any */ + ast_vhub_dev_suspend(&p->dev); + } + + /* Cleanup HW */ + writel(0, vhub->regs + AST_VHUB_CONF); + writel(0, vhub->regs + AST_VHUB_EP0_CTRL); + writel(VHUB_EP1_CTRL_RESET_TOGGLE | + VHUB_EP1_CTRL_ENABLE, + vhub->regs + AST_VHUB_EP1_CTRL); + writel(0, vhub->regs + AST_VHUB_EP1_STS_CHG); +} + +static void ast_vhub_of_parse_dev_desc(struct ast_vhub *vhub, + const struct device_node *vhub_np) +{ + u16 id; + u32 data; + + if (!of_property_read_u32(vhub_np, "vhub-vendor-id", &data)) { + id = (u16)data; + vhub->vhub_dev_desc.idVendor = cpu_to_le16(id); + } + if (!of_property_read_u32(vhub_np, "vhub-product-id", &data)) { + id = (u16)data; + vhub->vhub_dev_desc.idProduct = cpu_to_le16(id); + } + if (!of_property_read_u32(vhub_np, "vhub-device-revision", &data)) { + id = (u16)data; + vhub->vhub_dev_desc.bcdDevice = cpu_to_le16(id); + } +} + +static void ast_vhub_fixup_usb1_dev_desc(struct ast_vhub *vhub) +{ + vhub->vhub_dev_desc.bcdUSB = cpu_to_le16(0x0100); + vhub->vhub_dev_desc.bDeviceProtocol = 0; +} + +static struct usb_gadget_string_container* +ast_vhub_str_container_alloc(struct ast_vhub *vhub) +{ + unsigned int size; + struct usb_string *str_array; + struct usb_gadget_strings *lang_str; + struct usb_gadget_string_container *container; + + size = sizeof(*container); + size += sizeof(struct usb_gadget_strings); + size += sizeof(struct usb_string) * AST_VHUB_STR_INDEX_MAX; + container = devm_kzalloc(&vhub->pdev->dev, size, GFP_KERNEL); + if (!container) + return ERR_PTR(-ENOMEM); + + lang_str = ast_vhub_str_of_container(container); + str_array = (struct usb_string *)(lang_str + 1); + lang_str->strings = str_array; + return container; +} + +static void ast_vhub_str_deep_copy(struct usb_gadget_strings *dest, + const struct usb_gadget_strings *src) +{ + struct usb_string *src_array = src->strings; + struct usb_string *dest_array = dest->strings; + + dest->language = src->language; + if (src_array && dest_array) { + do { + *dest_array = *src_array; + dest_array++; + src_array++; + } while (src_array->s); + } +} + +static int ast_vhub_str_alloc_add(struct ast_vhub *vhub, + const struct usb_gadget_strings *src_str) +{ + struct usb_gadget_strings *dest_str; + struct usb_gadget_string_container *container; + + container = ast_vhub_str_container_alloc(vhub); + if (IS_ERR(container)) + return PTR_ERR(container); + + dest_str = ast_vhub_str_of_container(container); + ast_vhub_str_deep_copy(dest_str, src_str); + list_add_tail(&container->list, &vhub->vhub_str_desc); + + return 0; +} + +static const struct { + const char *name; + u8 id; +} str_id_map[] = { + {"manufacturer", AST_VHUB_STR_MANUF}, + {"product", AST_VHUB_STR_PRODUCT}, + {"serial-number", AST_VHUB_STR_SERIAL}, + {}, +}; + +static int ast_vhub_of_parse_str_desc(struct ast_vhub *vhub, + const struct device_node *desc_np) +{ + u32 langid; + int ret = 0; + int i, offset; + const char *str; + struct device_node *child; + struct usb_string str_array[AST_VHUB_STR_INDEX_MAX]; + struct usb_gadget_strings lang_str = { + .strings = (struct usb_string *)str_array, + }; + + for_each_child_of_node(desc_np, child) { + if (of_property_read_u32(child, "reg", &langid)) + continue; /* no language identifier specified */ + + if (!usb_validate_langid(langid)) + continue; /* invalid language identifier */ + + lang_str.language = langid; + for (i = offset = 0; str_id_map[i].name; i++) { + str = of_get_property(child, str_id_map[i].name, NULL); + if (str) { + str_array[offset].s = str; + str_array[offset].id = str_id_map[i].id; + offset++; + } + } + str_array[offset].id = 0; + str_array[offset].s = NULL; + + ret = ast_vhub_str_alloc_add(vhub, &lang_str); + if (ret) { + of_node_put(child); + break; + } + } + + return ret; +} + +static int ast_vhub_init_desc(struct ast_vhub *vhub) +{ + int ret; + struct device_node *desc_np; + const struct device_node *vhub_np = vhub->pdev->dev.of_node; + + /* Initialize vhub Device Descriptor. */ + memcpy(&vhub->vhub_dev_desc, &ast_vhub_dev_desc, + sizeof(vhub->vhub_dev_desc)); + ast_vhub_of_parse_dev_desc(vhub, vhub_np); + if (vhub->force_usb1) + ast_vhub_fixup_usb1_dev_desc(vhub); + + /* Initialize vhub Configuration Descriptor. */ + memcpy(&vhub->vhub_conf_desc, &ast_vhub_conf_desc, + sizeof(vhub->vhub_conf_desc)); + + /* Initialize vhub Hub Descriptor. */ + memcpy(&vhub->vhub_hub_desc, &ast_vhub_hub_desc, + sizeof(vhub->vhub_hub_desc)); + vhub->vhub_hub_desc.bNbrPorts = vhub->max_ports; + + /* Initialize vhub String Descriptors. */ + INIT_LIST_HEAD(&vhub->vhub_str_desc); + desc_np = of_get_child_by_name(vhub_np, "vhub-strings"); + if (desc_np) { + ret = ast_vhub_of_parse_str_desc(vhub, desc_np); + of_node_put(desc_np); + } + else + ret = ast_vhub_str_alloc_add(vhub, &ast_vhub_strings); + + /* Initialize vhub Qualifier Descriptor. */ + memcpy(&vhub->vhub_qual_desc, &ast_vhub_qual_desc, + sizeof(vhub->vhub_qual_desc)); + + return ret; +} + +int ast_vhub_init_hub(struct ast_vhub *vhub) +{ + vhub->speed = USB_SPEED_UNKNOWN; + INIT_WORK(&vhub->wake_work, ast_vhub_wake_work); + + return ast_vhub_init_desc(vhub); +} |