diff options
Diffstat (limited to '')
75 files changed, 89200 insertions, 0 deletions
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig new file mode 100644 index 000000000..5756acb07 --- /dev/null +++ b/drivers/usb/gadget/udc/Kconfig @@ -0,0 +1,510 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# USB Gadget support on a system involves +# (a) a peripheral controller, and +# (b) the gadget driver using it. +# +# NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !! +# +# - Host systems (like PCs) need CONFIG_USB (with "A" jacks). +# - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks). +# - Some systems have both kinds of controllers. +# +# With help from a special transceiver and a "Mini-AB" jack, systems with +# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG). +# + +# +# USB Peripheral Controller Support +# +# The order here is alphabetical, except that integrated controllers go +# before discrete ones so they will be the initial/default value: +# - integrated/SOC controllers first +# - licensed IP used in both SOC and discrete versions +# - discrete ones (including all PCI-only controllers) +# - debug/dummy gadget+hcd is last. +# +menu "USB Peripheral Controller" + +# +# Integrated controllers +# + +config USB_AT91 + tristate "Atmel AT91 USB Device Port" + depends on ARCH_AT91 + depends on OF || COMPILE_TEST + help + Many Atmel AT91 processors (such as the AT91RM2000) have a + full speed USB Device Port with support for five configurable + endpoints (plus endpoint zero). + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "at91_udc" and force all + gadget drivers to also be dynamically linked. + +config USB_LPC32XX + tristate "LPC32XX USB Peripheral Controller" + depends on ARCH_LPC32XX || COMPILE_TEST + depends on I2C + select USB_ISP1301 + help + This option selects the USB device controller in the LPC32xx SoC. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "lpc32xx_udc" and force all + gadget drivers to also be dynamically linked. + +config USB_ATMEL_USBA + tristate "Atmel USBA" + depends on ARCH_AT91 + help + USBA is the integrated high-speed USB Device controller on some + AT91SAM9 and AT91CAP9 processors from Atmel. + + The fifo_mode parameter is used to select endpoint allocation mode. + fifo_mode = 0 is used to let the driver autoconfigure the endpoints. + In this case, for ep1 2 banks are allocated if it works in isochronous + mode and only 1 bank otherwise. For the rest of the endpoints + only 1 bank is allocated. + + fifo_mode = 1 is a generic maximum fifo size (1024 bytes) configuration + allowing the usage of ep1 - ep6 + + fifo_mode = 2 is a generic performance maximum fifo size (1024 bytes) + configuration allowing the usage of ep1 - ep3 + + fifo_mode = 3 is a balanced performance configuration allowing the + the usage of ep1 - ep8 + +config USB_BCM63XX_UDC + tristate "Broadcom BCM63xx Peripheral Controller" + depends on BCM63XX + help + Many Broadcom BCM63xx chipsets (such as the BCM6328) have a + high speed USB Device Port with support for four fixed endpoints + (plus endpoint zero). + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "bcm63xx_udc". + +config USB_FSL_USB2 + tristate "Freescale Highspeed USB DR Peripheral Controller" + depends on FSL_SOC + help + Some of Freescale PowerPC and i.MX processors have a High Speed + Dual-Role(DR) USB controller, which supports device mode. + + The number of programmable endpoints is different through + SOC revisions. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "fsl_usb2_udc" and force + all gadget drivers to also be dynamically linked. + +config USB_FUSB300 + tristate "Faraday FUSB300 USB Peripheral Controller" + depends on !PHYS_ADDR_T_64BIT && HAS_DMA + help + Faraday usb device controller FUSB300 driver + +config USB_FOTG210_UDC + depends on HAS_DMA + tristate "Faraday FOTG210 USB Peripheral Controller" + help + Faraday USB2.0 OTG controller which can be configured as + high speed or full speed USB device. This driver supppors + Bulk Transfer so far. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "fotg210_udc". + +config USB_GR_UDC + tristate "Aeroflex Gaisler GRUSBDC USB Peripheral Controller Driver" + depends on HAS_DMA + help + Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB + VHDL IP core library. + +config USB_OMAP + tristate "OMAP USB Device Controller" + depends on ARCH_OMAP1 + depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3) + help + Many Texas Instruments OMAP processors have flexible full + speed USB device controllers, with support for up to 30 + endpoints (plus endpoint zero). This driver supports the + controller in the OMAP 1611, and should work with controllers + in other OMAP processors too, given minor tweaks. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "omap_udc" and force all + gadget drivers to also be dynamically linked. + +config USB_PXA25X + tristate "PXA 25x or IXP 4xx" + depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX + depends on HAS_IOMEM + help + Intel's PXA 25x series XScale ARM-5TE processors include + an integrated full speed USB 1.1 device controller. The + controller in the IXP 4xx series is register-compatible. + + It has fifteen fixed-function endpoints, as well as endpoint + zero (for control transfers). + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "pxa25x_udc" and force all + gadget drivers to also be dynamically linked. + +# if there's only one gadget driver, using only two bulk endpoints, +# don't waste memory for the other endpoints +config USB_PXA25X_SMALL + depends on USB_PXA25X + bool + default n if USB_ETH_RNDIS + default y if USB_ZERO + default y if USB_ETH + default y if USB_G_SERIAL + +config USB_R8A66597 + tristate "Renesas R8A66597 USB Peripheral Controller" + depends on HAS_DMA + help + R8A66597 is a discrete USB host and peripheral controller chip that + supports both full and high speed USB 2.0 data transfers. + It has nine configurable endpoints, and endpoint zero. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "r8a66597_udc" and force all + gadget drivers to also be dynamically linked. + +config USB_RENESAS_USBHS_UDC + tristate 'Renesas USBHS controller' + depends on USB_RENESAS_USBHS + help + Renesas USBHS is a discrete USB host and peripheral controller chip + that supports both full and high speed USB 2.0 data transfers. + It has nine or more configurable endpoints, and endpoint zero. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "renesas_usbhs" and force all + gadget drivers to also be dynamically linked. + +config USB_RENESAS_USB3 + tristate 'Renesas USB3.0 Peripheral controller' + depends on ARCH_RENESAS || COMPILE_TEST + depends on EXTCON + select USB_ROLE_SWITCH + help + Renesas USB3.0 Peripheral controller is a USB peripheral controller + that supports super, high, and full speed USB 3.0 data transfers. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "renesas_usb3" and force all + gadget drivers to also be dynamically linked. + +config USB_PXA27X + tristate "PXA 27x" + depends on HAS_IOMEM + help + Intel's PXA 27x series XScale ARM v5TE processors include + an integrated full speed USB 1.1 device controller. + + It has up to 23 endpoints, as well as endpoint zero (for + control transfers). + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "pxa27x_udc" and force all + gadget drivers to also be dynamically linked. + +config USB_S3C2410 + tristate "S3C2410 USB Device Controller" + depends on ARCH_S3C24XX + help + Samsung's S3C2410 is an ARM-4 processor with an integrated + full speed USB 1.1 device controller. It has 4 configurable + endpoints, as well as endpoint zero (for control transfers). + + This driver has been tested on the S3C2410, S3C2412, and + S3C2440 processors. + +config USB_S3C2410_DEBUG + bool "S3C2410 udc debug messages" + depends on USB_S3C2410 + +config USB_S3C_HSUDC + tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller" + depends on ARCH_S3C24XX + help + Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC + integrated with dual speed USB 2.0 device controller. It has + 8 endpoints, as well as endpoint zero. + + This driver has been tested on S3C2416 and S3C2450 processors. + +config USB_MV_UDC + tristate "Marvell USB2.0 Device Controller" + depends on HAS_DMA + help + Marvell Socs (including PXA and MMP series) include a high speed + USB2.0 OTG controller, which can be configured as high speed or + full speed USB peripheral. + +config USB_MV_U3D + depends on HAS_DMA + tristate "MARVELL PXA2128 USB 3.0 controller" + help + MARVELL PXA2128 Processor series include a super speed USB3.0 device + controller, which support super speed USB peripheral. + +config USB_SNP_CORE + depends on (USB_AMD5536UDC || USB_SNP_UDC_PLAT) + depends on HAS_DMA + tristate + help + This enables core driver support for Synopsys USB 2.0 Device + controller. + + This will be enabled when PCI or Platform driver for this UDC is + selected. Currently, this will be enabled by USB_SNP_UDC_PLAT or + USB_AMD5536UDC options. + + This IP is different to the High Speed OTG IP that can be enabled + by selecting USB_DWC2 or USB_DWC3 options. + +config USB_SNP_UDC_PLAT + tristate "Synopsys USB 2.0 Device controller" + depends on USB_GADGET && OF && HAS_DMA + depends on EXTCON || EXTCON=n + select USB_SNP_CORE + default ARCH_BCM_IPROC + help + This adds Platform Device support for Synopsys Designware core + AHB subsystem USB2.0 Device Controller (UDC). + + This driver works with UDCs integrated into Broadcom's Northstar2 + and Cygnus SoCs. + + If unsure, say N. +# +# Controllers available in both integrated and discrete versions +# + +config USB_M66592 + tristate "Renesas M66592 USB Peripheral Controller" + depends on HAS_IOMEM + help + M66592 is a discrete USB peripheral controller chip that + supports both full and high speed USB 2.0 data transfers. + It has seven configurable endpoints, and endpoint zero. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "m66592_udc" and force all + gadget drivers to also be dynamically linked. + +source "drivers/usb/gadget/udc/bdc/Kconfig" + +# +# Controllers available only in discrete form (and all PCI controllers) +# + +config USB_AMD5536UDC + tristate "AMD5536 UDC" + depends on USB_PCI && HAS_DMA + select USB_SNP_CORE + help + The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge. + It is a USB Highspeed DMA capable USB device controller. Beside ep0 + it provides 4 IN and 4 OUT endpoints (bulk or interrupt type). + The UDC port supports OTG operation, and may be used as a host port + if it's not being used to implement peripheral or OTG roles. + + This UDC is based on Synopsys USB device controller IP and selects + CONFIG_USB_SNP_CORE option to build the core driver. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "amd5536udc" and force all + gadget drivers to also be dynamically linked. + +config USB_FSL_QE + tristate "Freescale QE/CPM USB Device Controller" + depends on FSL_SOC && (QUICC_ENGINE || CPM) + depends on !64BIT || BROKEN + help + Some of Freescale PowerPC processors have a Full Speed + QE/CPM2 USB controller, which support device mode with 4 + programmable endpoints. This driver supports the + controller in the MPC8360 and MPC8272, and should work with + controllers having QE or CPM2, given minor tweaks. + + Set CONFIG_USB_GADGET to "m" to build this driver as a + dynamically linked module called "fsl_qe_udc". + +config USB_NET2272 + depends on HAS_IOMEM + tristate "PLX NET2272" + help + PLX NET2272 is a USB peripheral controller which supports + both full and high speed USB 2.0 data transfers. + + It has three configurable endpoints, as well as endpoint zero + (for control transfer). + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "net2272" and force all + gadget drivers to also be dynamically linked. + +config USB_NET2272_DMA + bool "Support external DMA controller" + depends on USB_NET2272 && HAS_DMA + help + The NET2272 part can optionally support an external DMA + controller, but your board has to have support in the + driver itself. + + If unsure, say "N" here. The driver works fine in PIO mode. + +config USB_NET2280 + tristate "NetChip NET228x / PLX USB3x8x" + depends on USB_PCI + help + NetChip 2280 / 2282 is a PCI based USB peripheral controller which + supports both full and high speed USB 2.0 data transfers. + + It has six configurable endpoints, as well as endpoint zero + (for control transfers) and several endpoints with dedicated + functions. + + PLX 2380 is a PCIe version of the PLX 2380. + + PLX 3380 / 3382 is a PCIe based USB peripheral controller which + supports full, high speed USB 2.0 and super speed USB 3.0 + data transfers. + + It has eight configurable endpoints, as well as endpoint zero + (for control transfers) and several endpoints with dedicated + functions. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "net2280" and force all + gadget drivers to also be dynamically linked. + +config USB_GOKU + tristate "Toshiba TC86C001 'Goku-S'" + depends on USB_PCI + help + The Toshiba TC86C001 is a PCI device which includes controllers + for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI). + + The device controller has three configurable (bulk or interrupt) + endpoints, plus endpoint zero (for control transfers). + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "goku_udc" and to force all + gadget drivers to also be dynamically linked. + +config USB_EG20T + tristate "Intel QUARK X1000/EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC" + depends on USB_PCI + help + This is a USB device driver for EG20T PCH. + EG20T PCH is the platform controller hub that is used in Intel's + general embedded platform. EG20T PCH has USB device interface. + Using this interface, it is able to access system devices connected + to USB device. + This driver enables USB device function. + USB device is a USB peripheral controller which + supports both full and high speed USB 2.0 data transfers. + This driver supports both control transfer and bulk transfer modes. + This driver dose not support interrupt transfer or isochronous + transfer modes. + + This driver also can be used for LAPIS Semiconductor's ML7213 which is + for IVI(In-Vehicle Infotainment) use. + ML7831 is for general purpose use. + ML7213/ML7831 is companion chip for Intel Atom E6xx series. + ML7213/ML7831 is completely compatible for Intel EG20T PCH. + + This driver can be used with Intel's Quark X1000 SOC platform + +config USB_GADGET_XILINX + tristate "Xilinx USB Driver" + depends on HAS_DMA + depends on OF || COMPILE_TEST + help + USB peripheral controller driver for Xilinx USB2 device. + Xilinx USB2 device is a soft IP which supports both full + and high speed USB 2.0 data transfers. It has seven configurable + endpoints(bulk or interrupt or isochronous), as well as + endpoint zero(for control transfers). + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "udc-xilinx" and force all + gadget drivers to also be dynamically linked. + +config USB_MAX3420_UDC + tristate "MAX3420 (USB-over-SPI) support" + depends on SPI + help + The Maxim MAX3420 chip supports USB2.0 full-speed peripheral mode. + The MAX3420 is run by SPI interface, and hence the dependency. + + To compile this driver as a module, choose M here: the module will + be called max3420_udc + +config USB_TEGRA_XUDC + tristate "NVIDIA Tegra Superspeed USB 3.0 Device Controller" + depends on ARCH_TEGRA || COMPILE_TEST + depends on PHY_TEGRA_XUSB + help + Enables NVIDIA Tegra USB 3.0 device mode controller driver. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "tegra_xudc" and force all + gadget drivers to also be dynamically linked. + +config USB_ASPEED_UDC + tristate "Aspeed UDC driver support" + depends on ARCH_ASPEED || COMPILE_TEST + depends on USB_LIBCOMPOSITE + help + Enables Aspeed USB2.0 Device Controller driver for AST260x + family SoCs. The controller supports 1 control endpoint and + 4 programmable endpoints. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "aspeed_udc" and force all + gadget drivers to also be dynamically linked. + +source "drivers/usb/gadget/udc/aspeed-vhub/Kconfig" + +# +# LAST -- dummy/emulated controller +# + +config USB_DUMMY_HCD + tristate "Dummy HCD (DEVELOPMENT)" + depends on USB=y || (USB=m && USB_GADGET=m) + help + This host controller driver emulates USB, looping all data transfer + requests back to a USB "gadget driver" in the same host. The host + side is the controller; the gadget side is the device. Gadget drivers + can be high, full, or low speed; and they have access to endpoints + like those from NET2280, PXA2xx, or SA1100 hardware. + + This may help in some stages of creating a driver to embed in a + Linux device, since it lets you debug several parts of the gadget + driver without its hardware or drivers being involved. + + Since such a gadget side driver needs to interoperate with a host + side Linux-USB device driver, this may help to debug both sides + of a USB protocol stack. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "dummy_hcd" and force all + gadget drivers to also be dynamically linked. + +# NOTE: Please keep dummy_hcd LAST so that "real hardware" appears +# first and will be selected by default. + +endmenu diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile new file mode 100644 index 000000000..12f9e4c9e --- /dev/null +++ b/drivers/usb/gadget/udc/Makefile @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0 +# define_trace.h needs to know how to find our header +CFLAGS_trace.o := -I$(src) + +udc-core-y := core.o trace.o + +# +# USB peripheral controller drivers +# +obj-$(CONFIG_USB_GADGET) += udc-core.o +obj-$(CONFIG_USB_DUMMY_HCD) += dummy_hcd.o +obj-$(CONFIG_USB_NET2272) += net2272.o +obj-$(CONFIG_USB_NET2280) += net2280.o +obj-$(CONFIG_USB_SNP_CORE) += snps_udc_core.o +obj-$(CONFIG_USB_AMD5536UDC) += amd5536udc_pci.o +obj-$(CONFIG_USB_PXA25X) += pxa25x_udc.o +obj-$(CONFIG_USB_PXA27X) += pxa27x_udc.o +obj-$(CONFIG_USB_GOKU) += goku_udc.o +obj-$(CONFIG_USB_OMAP) += omap_udc.o +obj-$(CONFIG_USB_S3C2410) += s3c2410_udc.o +obj-$(CONFIG_USB_AT91) += at91_udc.o +obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o +obj-$(CONFIG_USB_BCM63XX_UDC) += bcm63xx_udc.o +obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o +fsl_usb2_udc-y := fsl_udc_core.o +obj-$(CONFIG_USB_TEGRA_XUDC) += tegra-xudc.o +obj-$(CONFIG_USB_M66592) += m66592-udc.o +obj-$(CONFIG_USB_R8A66597) += r8a66597-udc.o +obj-$(CONFIG_USB_RENESAS_USB3) += renesas_usb3.o +obj-$(CONFIG_USB_FSL_QE) += fsl_qe_udc.o +obj-$(CONFIG_USB_S3C_HSUDC) += s3c-hsudc.o +obj-$(CONFIG_USB_LPC32XX) += lpc32xx_udc.o +obj-$(CONFIG_USB_EG20T) += pch_udc.o +obj-$(CONFIG_USB_MV_UDC) += mv_udc.o +mv_udc-y := mv_udc_core.o +obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o +obj-$(CONFIG_USB_FOTG210_UDC) += fotg210-udc.o +obj-$(CONFIG_USB_MV_U3D) += mv_u3d_core.o +obj-$(CONFIG_USB_GR_UDC) += gr_udc.o +obj-$(CONFIG_USB_GADGET_XILINX) += udc-xilinx.o +obj-$(CONFIG_USB_SNP_UDC_PLAT) += snps_udc_plat.o +obj-$(CONFIG_USB_ASPEED_VHUB) += aspeed-vhub/ +obj-$(CONFIG_USB_ASPEED_UDC) += aspeed_udc.o +obj-$(CONFIG_USB_BDC_UDC) += bdc/ +obj-$(CONFIG_USB_MAX3420_UDC) += max3420_udc.o diff --git a/drivers/usb/gadget/udc/amd5536udc.h b/drivers/usb/gadget/udc/amd5536udc.h new file mode 100644 index 000000000..055436016 --- /dev/null +++ b/drivers/usb/gadget/udc/amd5536udc.h @@ -0,0 +1,661 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * amd5536.h -- header for AMD 5536 UDC high/full speed USB device controller + * + * Copyright (C) 2007 AMD (https://www.amd.com) + * Author: Thomas Dahlmann + */ + +#ifndef AMD5536UDC_H +#define AMD5536UDC_H + +/* debug control */ +/* #define UDC_VERBOSE */ + +#include <linux/extcon.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + +/* various constants */ +#define UDC_RDE_TIMER_SECONDS 1 +#define UDC_RDE_TIMER_DIV 10 +#define UDC_POLLSTALL_TIMER_USECONDS 500 + +/* Hs AMD5536 chip rev. */ +#define UDC_HSA0_REV 1 +#define UDC_HSB1_REV 2 + +/* Broadcom chip rev. */ +#define UDC_BCM_REV 10 + +/* + * SETUP usb commands + * needed, because some SETUP's are handled in hw, but must be passed to + * gadget driver above + * SET_CONFIG + */ +#define UDC_SETCONFIG_DWORD0 0x00000900 +#define UDC_SETCONFIG_DWORD0_VALUE_MASK 0xffff0000 +#define UDC_SETCONFIG_DWORD0_VALUE_OFS 16 + +#define UDC_SETCONFIG_DWORD1 0x00000000 + +/* SET_INTERFACE */ +#define UDC_SETINTF_DWORD0 0x00000b00 +#define UDC_SETINTF_DWORD0_ALT_MASK 0xffff0000 +#define UDC_SETINTF_DWORD0_ALT_OFS 16 + +#define UDC_SETINTF_DWORD1 0x00000000 +#define UDC_SETINTF_DWORD1_INTF_MASK 0x0000ffff +#define UDC_SETINTF_DWORD1_INTF_OFS 0 + +/* Mass storage reset */ +#define UDC_MSCRES_DWORD0 0x0000ff21 +#define UDC_MSCRES_DWORD1 0x00000000 + +/* Global CSR's -------------------------------------------------------------*/ +#define UDC_CSR_ADDR 0x500 + +/* EP NE bits */ +/* EP number */ +#define UDC_CSR_NE_NUM_MASK 0x0000000f +#define UDC_CSR_NE_NUM_OFS 0 +/* EP direction */ +#define UDC_CSR_NE_DIR_MASK 0x00000010 +#define UDC_CSR_NE_DIR_OFS 4 +/* EP type */ +#define UDC_CSR_NE_TYPE_MASK 0x00000060 +#define UDC_CSR_NE_TYPE_OFS 5 +/* EP config number */ +#define UDC_CSR_NE_CFG_MASK 0x00000780 +#define UDC_CSR_NE_CFG_OFS 7 +/* EP interface number */ +#define UDC_CSR_NE_INTF_MASK 0x00007800 +#define UDC_CSR_NE_INTF_OFS 11 +/* EP alt setting */ +#define UDC_CSR_NE_ALT_MASK 0x00078000 +#define UDC_CSR_NE_ALT_OFS 15 + +/* max pkt */ +#define UDC_CSR_NE_MAX_PKT_MASK 0x3ff80000 +#define UDC_CSR_NE_MAX_PKT_OFS 19 + +/* Device Config Register ---------------------------------------------------*/ +#define UDC_DEVCFG_ADDR 0x400 + +#define UDC_DEVCFG_SOFTRESET 31 +#define UDC_DEVCFG_HNPSFEN 30 +#define UDC_DEVCFG_DMARST 29 +#define UDC_DEVCFG_SET_DESC 18 +#define UDC_DEVCFG_CSR_PRG 17 +#define UDC_DEVCFG_STATUS 7 +#define UDC_DEVCFG_DIR 6 +#define UDC_DEVCFG_PI 5 +#define UDC_DEVCFG_SS 4 +#define UDC_DEVCFG_SP 3 +#define UDC_DEVCFG_RWKP 2 + +#define UDC_DEVCFG_SPD_MASK 0x3 +#define UDC_DEVCFG_SPD_OFS 0 +#define UDC_DEVCFG_SPD_HS 0x0 +#define UDC_DEVCFG_SPD_FS 0x1 +#define UDC_DEVCFG_SPD_LS 0x2 +/*#define UDC_DEVCFG_SPD_FS 0x3*/ + + +/* Device Control Register --------------------------------------------------*/ +#define UDC_DEVCTL_ADDR 0x404 + +#define UDC_DEVCTL_THLEN_MASK 0xff000000 +#define UDC_DEVCTL_THLEN_OFS 24 + +#define UDC_DEVCTL_BRLEN_MASK 0x00ff0000 +#define UDC_DEVCTL_BRLEN_OFS 16 + +#define UDC_DEVCTL_SRX_FLUSH 14 +#define UDC_DEVCTL_CSR_DONE 13 +#define UDC_DEVCTL_DEVNAK 12 +#define UDC_DEVCTL_SD 10 +#define UDC_DEVCTL_MODE 9 +#define UDC_DEVCTL_BREN 8 +#define UDC_DEVCTL_THE 7 +#define UDC_DEVCTL_BF 6 +#define UDC_DEVCTL_BE 5 +#define UDC_DEVCTL_DU 4 +#define UDC_DEVCTL_TDE 3 +#define UDC_DEVCTL_RDE 2 +#define UDC_DEVCTL_RES 0 + + +/* Device Status Register ---------------------------------------------------*/ +#define UDC_DEVSTS_ADDR 0x408 + +#define UDC_DEVSTS_TS_MASK 0xfffc0000 +#define UDC_DEVSTS_TS_OFS 18 + +#define UDC_DEVSTS_SESSVLD 17 +#define UDC_DEVSTS_PHY_ERROR 16 +#define UDC_DEVSTS_RXFIFO_EMPTY 15 + +#define UDC_DEVSTS_ENUM_SPEED_MASK 0x00006000 +#define UDC_DEVSTS_ENUM_SPEED_OFS 13 +#define UDC_DEVSTS_ENUM_SPEED_FULL 1 +#define UDC_DEVSTS_ENUM_SPEED_HIGH 0 + +#define UDC_DEVSTS_SUSP 12 + +#define UDC_DEVSTS_ALT_MASK 0x00000f00 +#define UDC_DEVSTS_ALT_OFS 8 + +#define UDC_DEVSTS_INTF_MASK 0x000000f0 +#define UDC_DEVSTS_INTF_OFS 4 + +#define UDC_DEVSTS_CFG_MASK 0x0000000f +#define UDC_DEVSTS_CFG_OFS 0 + + +/* Device Interrupt Register ------------------------------------------------*/ +#define UDC_DEVINT_ADDR 0x40c + +#define UDC_DEVINT_SVC 7 +#define UDC_DEVINT_ENUM 6 +#define UDC_DEVINT_SOF 5 +#define UDC_DEVINT_US 4 +#define UDC_DEVINT_UR 3 +#define UDC_DEVINT_ES 2 +#define UDC_DEVINT_SI 1 +#define UDC_DEVINT_SC 0 + +/* Device Interrupt Mask Register -------------------------------------------*/ +#define UDC_DEVINT_MSK_ADDR 0x410 + +#define UDC_DEVINT_MSK 0x7f + +/* Endpoint Interrupt Register ----------------------------------------------*/ +#define UDC_EPINT_ADDR 0x414 + +#define UDC_EPINT_OUT_MASK 0xffff0000 +#define UDC_EPINT_OUT_OFS 16 +#define UDC_EPINT_IN_MASK 0x0000ffff +#define UDC_EPINT_IN_OFS 0 + +#define UDC_EPINT_IN_EP0 0 +#define UDC_EPINT_IN_EP1 1 +#define UDC_EPINT_IN_EP2 2 +#define UDC_EPINT_IN_EP3 3 +#define UDC_EPINT_OUT_EP0 16 +#define UDC_EPINT_OUT_EP1 17 +#define UDC_EPINT_OUT_EP2 18 +#define UDC_EPINT_OUT_EP3 19 + +#define UDC_EPINT_EP0_ENABLE_MSK 0x001e001e + +/* Endpoint Interrupt Mask Register -----------------------------------------*/ +#define UDC_EPINT_MSK_ADDR 0x418 + +#define UDC_EPINT_OUT_MSK_MASK 0xffff0000 +#define UDC_EPINT_OUT_MSK_OFS 16 +#define UDC_EPINT_IN_MSK_MASK 0x0000ffff +#define UDC_EPINT_IN_MSK_OFS 0 + +#define UDC_EPINT_MSK_DISABLE_ALL 0xffffffff +/* mask non-EP0 endpoints */ +#define UDC_EPDATAINT_MSK_DISABLE 0xfffefffe +/* mask all dev interrupts */ +#define UDC_DEV_MSK_DISABLE 0x7f + +/* Endpoint-specific CSR's --------------------------------------------------*/ +#define UDC_EPREGS_ADDR 0x0 +#define UDC_EPIN_REGS_ADDR 0x0 +#define UDC_EPOUT_REGS_ADDR 0x200 + +#define UDC_EPCTL_ADDR 0x0 + +#define UDC_EPCTL_RRDY 9 +#define UDC_EPCTL_CNAK 8 +#define UDC_EPCTL_SNAK 7 +#define UDC_EPCTL_NAK 6 + +#define UDC_EPCTL_ET_MASK 0x00000030 +#define UDC_EPCTL_ET_OFS 4 +#define UDC_EPCTL_ET_CONTROL 0 +#define UDC_EPCTL_ET_ISO 1 +#define UDC_EPCTL_ET_BULK 2 +#define UDC_EPCTL_ET_INTERRUPT 3 + +#define UDC_EPCTL_P 3 +#define UDC_EPCTL_SN 2 +#define UDC_EPCTL_F 1 +#define UDC_EPCTL_S 0 + +/* Endpoint Status Registers ------------------------------------------------*/ +#define UDC_EPSTS_ADDR 0x4 + +#define UDC_EPSTS_RX_PKT_SIZE_MASK 0x007ff800 +#define UDC_EPSTS_RX_PKT_SIZE_OFS 11 + +#define UDC_EPSTS_TDC 10 +#define UDC_EPSTS_HE 9 +#define UDC_EPSTS_BNA 7 +#define UDC_EPSTS_IN 6 + +#define UDC_EPSTS_OUT_MASK 0x00000030 +#define UDC_EPSTS_OUT_OFS 4 +#define UDC_EPSTS_OUT_DATA 1 +#define UDC_EPSTS_OUT_DATA_CLEAR 0x10 +#define UDC_EPSTS_OUT_SETUP 2 +#define UDC_EPSTS_OUT_SETUP_CLEAR 0x20 +#define UDC_EPSTS_OUT_CLEAR 0x30 + +/* Endpoint Buffer Size IN/ Receive Packet Frame Number OUT Registers ------*/ +#define UDC_EPIN_BUFF_SIZE_ADDR 0x8 +#define UDC_EPOUT_FRAME_NUMBER_ADDR 0x8 + +#define UDC_EPIN_BUFF_SIZE_MASK 0x0000ffff +#define UDC_EPIN_BUFF_SIZE_OFS 0 +/* EP0in txfifo = 128 bytes*/ +#define UDC_EPIN0_BUFF_SIZE 32 +/* EP0in fullspeed txfifo = 128 bytes*/ +#define UDC_FS_EPIN0_BUFF_SIZE 32 + +/* fifo size mult = fifo size / max packet */ +#define UDC_EPIN_BUFF_SIZE_MULT 2 + +/* EPin data fifo size = 1024 bytes DOUBLE BUFFERING */ +#define UDC_EPIN_BUFF_SIZE 256 +/* EPin small INT data fifo size = 128 bytes */ +#define UDC_EPIN_SMALLINT_BUFF_SIZE 32 + +/* EPin fullspeed data fifo size = 128 bytes DOUBLE BUFFERING */ +#define UDC_FS_EPIN_BUFF_SIZE 32 + +#define UDC_EPOUT_FRAME_NUMBER_MASK 0x0000ffff +#define UDC_EPOUT_FRAME_NUMBER_OFS 0 + +/* Endpoint Buffer Size OUT/Max Packet Size Registers -----------------------*/ +#define UDC_EPOUT_BUFF_SIZE_ADDR 0x0c +#define UDC_EP_MAX_PKT_SIZE_ADDR 0x0c + +#define UDC_EPOUT_BUFF_SIZE_MASK 0xffff0000 +#define UDC_EPOUT_BUFF_SIZE_OFS 16 +#define UDC_EP_MAX_PKT_SIZE_MASK 0x0000ffff +#define UDC_EP_MAX_PKT_SIZE_OFS 0 +/* EP0in max packet size = 64 bytes */ +#define UDC_EP0IN_MAX_PKT_SIZE 64 +/* EP0out max packet size = 64 bytes */ +#define UDC_EP0OUT_MAX_PKT_SIZE 64 +/* EP0in fullspeed max packet size = 64 bytes */ +#define UDC_FS_EP0IN_MAX_PKT_SIZE 64 +/* EP0out fullspeed max packet size = 64 bytes */ +#define UDC_FS_EP0OUT_MAX_PKT_SIZE 64 + +/* + * Endpoint dma descriptors ------------------------------------------------ + * + * Setup data, Status dword + */ +#define UDC_DMA_STP_STS_CFG_MASK 0x0fff0000 +#define UDC_DMA_STP_STS_CFG_OFS 16 +#define UDC_DMA_STP_STS_CFG_ALT_MASK 0x000f0000 +#define UDC_DMA_STP_STS_CFG_ALT_OFS 16 +#define UDC_DMA_STP_STS_CFG_INTF_MASK 0x00f00000 +#define UDC_DMA_STP_STS_CFG_INTF_OFS 20 +#define UDC_DMA_STP_STS_CFG_NUM_MASK 0x0f000000 +#define UDC_DMA_STP_STS_CFG_NUM_OFS 24 +#define UDC_DMA_STP_STS_RX_MASK 0x30000000 +#define UDC_DMA_STP_STS_RX_OFS 28 +#define UDC_DMA_STP_STS_BS_MASK 0xc0000000 +#define UDC_DMA_STP_STS_BS_OFS 30 +#define UDC_DMA_STP_STS_BS_HOST_READY 0 +#define UDC_DMA_STP_STS_BS_DMA_BUSY 1 +#define UDC_DMA_STP_STS_BS_DMA_DONE 2 +#define UDC_DMA_STP_STS_BS_HOST_BUSY 3 +/* IN data, Status dword */ +#define UDC_DMA_IN_STS_TXBYTES_MASK 0x0000ffff +#define UDC_DMA_IN_STS_TXBYTES_OFS 0 +#define UDC_DMA_IN_STS_FRAMENUM_MASK 0x07ff0000 +#define UDC_DMA_IN_STS_FRAMENUM_OFS 0 +#define UDC_DMA_IN_STS_L 27 +#define UDC_DMA_IN_STS_TX_MASK 0x30000000 +#define UDC_DMA_IN_STS_TX_OFS 28 +#define UDC_DMA_IN_STS_BS_MASK 0xc0000000 +#define UDC_DMA_IN_STS_BS_OFS 30 +#define UDC_DMA_IN_STS_BS_HOST_READY 0 +#define UDC_DMA_IN_STS_BS_DMA_BUSY 1 +#define UDC_DMA_IN_STS_BS_DMA_DONE 2 +#define UDC_DMA_IN_STS_BS_HOST_BUSY 3 +/* OUT data, Status dword */ +#define UDC_DMA_OUT_STS_RXBYTES_MASK 0x0000ffff +#define UDC_DMA_OUT_STS_RXBYTES_OFS 0 +#define UDC_DMA_OUT_STS_FRAMENUM_MASK 0x07ff0000 +#define UDC_DMA_OUT_STS_FRAMENUM_OFS 0 +#define UDC_DMA_OUT_STS_L 27 +#define UDC_DMA_OUT_STS_RX_MASK 0x30000000 +#define UDC_DMA_OUT_STS_RX_OFS 28 +#define UDC_DMA_OUT_STS_BS_MASK 0xc0000000 +#define UDC_DMA_OUT_STS_BS_OFS 30 +#define UDC_DMA_OUT_STS_BS_HOST_READY 0 +#define UDC_DMA_OUT_STS_BS_DMA_BUSY 1 +#define UDC_DMA_OUT_STS_BS_DMA_DONE 2 +#define UDC_DMA_OUT_STS_BS_HOST_BUSY 3 +/* max ep0in packet */ +#define UDC_EP0IN_MAXPACKET 1000 +/* max dma packet */ +#define UDC_DMA_MAXPACKET 65536 + +/* un-usable DMA address */ +#define DMA_DONT_USE (~(dma_addr_t) 0 ) + +/* other Endpoint register addresses and values-----------------------------*/ +#define UDC_EP_SUBPTR_ADDR 0x10 +#define UDC_EP_DESPTR_ADDR 0x14 +#define UDC_EP_WRITE_CONFIRM_ADDR 0x1c + +/* EP number as layouted in AHB space */ +#define UDC_EP_NUM 32 +#define UDC_EPIN_NUM 16 +#define UDC_EPIN_NUM_USED 5 +#define UDC_EPOUT_NUM 16 +/* EP number of EP's really used = EP0 + 8 data EP's */ +#define UDC_USED_EP_NUM 9 +/* UDC CSR regs are aligned but AHB regs not - offset for OUT EP's */ +#define UDC_CSR_EP_OUT_IX_OFS 12 + +#define UDC_EP0OUT_IX 16 +#define UDC_EP0IN_IX 0 + +/* Rx fifo address and size = 1k -------------------------------------------*/ +#define UDC_RXFIFO_ADDR 0x800 +#define UDC_RXFIFO_SIZE 0x400 + +/* Tx fifo address and size = 1.5k -----------------------------------------*/ +#define UDC_TXFIFO_ADDR 0xc00 +#define UDC_TXFIFO_SIZE 0x600 + +/* default data endpoints --------------------------------------------------*/ +#define UDC_EPIN_STATUS_IX 1 +#define UDC_EPIN_IX 2 +#define UDC_EPOUT_IX 18 + +/* general constants -------------------------------------------------------*/ +#define UDC_DWORD_BYTES 4 +#define UDC_BITS_PER_BYTE_SHIFT 3 +#define UDC_BYTE_MASK 0xff +#define UDC_BITS_PER_BYTE 8 + +/*---------------------------------------------------------------------------*/ +/* UDC CSR's */ +struct udc_csrs { + + /* sca - setup command address */ + u32 sca; + + /* ep ne's */ + u32 ne[UDC_USED_EP_NUM]; +} __attribute__ ((packed)); + +/* AHB subsystem CSR registers */ +struct udc_regs { + + /* device configuration */ + u32 cfg; + + /* device control */ + u32 ctl; + + /* device status */ + u32 sts; + + /* device interrupt */ + u32 irqsts; + + /* device interrupt mask */ + u32 irqmsk; + + /* endpoint interrupt */ + u32 ep_irqsts; + + /* endpoint interrupt mask */ + u32 ep_irqmsk; +} __attribute__ ((packed)); + +/* endpoint specific registers */ +struct udc_ep_regs { + + /* endpoint control */ + u32 ctl; + + /* endpoint status */ + u32 sts; + + /* endpoint buffer size in/ receive packet frame number out */ + u32 bufin_framenum; + + /* endpoint buffer size out/max packet size */ + u32 bufout_maxpkt; + + /* endpoint setup buffer pointer */ + u32 subptr; + + /* endpoint data descriptor pointer */ + u32 desptr; + + /* reserved */ + u32 reserved; + + /* write/read confirmation */ + u32 confirm; + +} __attribute__ ((packed)); + +/* control data DMA desc */ +struct udc_stp_dma { + /* status quadlet */ + u32 status; + /* reserved */ + u32 _reserved; + /* first setup word */ + u32 data12; + /* second setup word */ + u32 data34; +} __attribute__ ((aligned (16))); + +/* normal data DMA desc */ +struct udc_data_dma { + /* status quadlet */ + u32 status; + /* reserved */ + u32 _reserved; + /* buffer pointer */ + u32 bufptr; + /* next descriptor pointer */ + u32 next; +} __attribute__ ((aligned (16))); + +/* request packet */ +struct udc_request { + /* embedded gadget ep */ + struct usb_request req; + + /* flags */ + unsigned dma_going : 1, + dma_done : 1; + /* phys. address */ + dma_addr_t td_phys; + /* first dma desc. of chain */ + struct udc_data_dma *td_data; + /* last dma desc. of chain */ + struct udc_data_dma *td_data_last; + struct list_head queue; + + /* chain length */ + unsigned chain_len; + +}; + +/* UDC specific endpoint parameters */ +struct udc_ep { + struct usb_ep ep; + struct udc_ep_regs __iomem *regs; + u32 __iomem *txfifo; + u32 __iomem *dma; + dma_addr_t td_phys; + dma_addr_t td_stp_dma; + struct udc_stp_dma *td_stp; + struct udc_data_dma *td; + /* temp request */ + struct udc_request *req; + unsigned req_used; + unsigned req_completed; + /* dummy DMA desc for BNA dummy */ + struct udc_request *bna_dummy_req; + unsigned bna_occurred; + + /* NAK state */ + unsigned naking; + + struct udc *dev; + + /* queue for requests */ + struct list_head queue; + unsigned halted; + unsigned cancel_transfer; + unsigned num : 5, + fifo_depth : 14, + in : 1; +}; + +/* device struct */ +struct udc { + struct usb_gadget gadget; + spinlock_t lock; /* protects all state */ + /* all endpoints */ + struct udc_ep ep[UDC_EP_NUM]; + struct usb_gadget_driver *driver; + /* operational flags */ + unsigned stall_ep0in : 1, + waiting_zlp_ack_ep0in : 1, + set_cfg_not_acked : 1, + data_ep_enabled : 1, + data_ep_queued : 1, + sys_suspended : 1, + connected; + + u16 chiprev; + + /* registers */ + struct pci_dev *pdev; + struct udc_csrs __iomem *csr; + struct udc_regs __iomem *regs; + struct udc_ep_regs __iomem *ep_regs; + u32 __iomem *rxfifo; + u32 __iomem *txfifo; + + /* DMA desc pools */ + struct dma_pool *data_requests; + struct dma_pool *stp_requests; + + /* device data */ + unsigned long phys_addr; + void __iomem *virt_addr; + unsigned irq; + + /* states */ + u16 cur_config; + u16 cur_intf; + u16 cur_alt; + + /* for platform device and extcon support */ + struct device *dev; + struct phy *udc_phy; + struct extcon_dev *edev; + struct extcon_specific_cable_nb extcon_nb; + struct notifier_block nb; + struct delayed_work drd_work; + u32 conn_type; +}; + +#define to_amd5536_udc(g) (container_of((g), struct udc, gadget)) + +/* setup request data */ +union udc_setup_data { + u32 data[2]; + struct usb_ctrlrequest request; +}; + +/* Function declarations */ +int udc_enable_dev_setup_interrupts(struct udc *dev); +int udc_mask_unused_interrupts(struct udc *dev); +irqreturn_t udc_irq(int irq, void *pdev); +void gadget_release(struct device *pdev); +void empty_req_queue(struct udc_ep *ep); +void udc_basic_init(struct udc *dev); +void free_dma_pools(struct udc *dev); +int init_dma_pools(struct udc *dev); +void udc_remove(struct udc *dev); +int udc_probe(struct udc *dev); + +/* DMA usage flag */ +static bool use_dma = 1; +/* packet per buffer dma */ +static bool use_dma_ppb = 1; +/* with per descr. update */ +static bool use_dma_ppb_du; +/* full speed only mode */ +static bool use_fullspeed; + +/* module parameters */ +module_param(use_dma, bool, S_IRUGO); +MODULE_PARM_DESC(use_dma, "true for DMA"); +module_param(use_dma_ppb, bool, S_IRUGO); +MODULE_PARM_DESC(use_dma_ppb, "true for DMA in packet per buffer mode"); +module_param(use_dma_ppb_du, bool, S_IRUGO); +MODULE_PARM_DESC(use_dma_ppb_du, + "true for DMA in packet per buffer mode with descriptor update"); +module_param(use_fullspeed, bool, S_IRUGO); +MODULE_PARM_DESC(use_fullspeed, "true for fullspeed only"); +/* + *--------------------------------------------------------------------------- + * SET and GET bitfields in u32 values + * via constants for mask/offset: + * <bit_field_stub_name> is the text between + * UDC_ and _MASK|_OFS of appropriate + * constant + * + * set bitfield value in u32 u32Val + */ +#define AMD_ADDBITS(u32Val, bitfield_val, bitfield_stub_name) \ + (((u32Val) & (((u32) ~((u32) bitfield_stub_name##_MASK)))) \ + | (((bitfield_val) << ((u32) bitfield_stub_name##_OFS)) \ + & ((u32) bitfield_stub_name##_MASK))) + +/* + * set bitfield value in zero-initialized u32 u32Val + * => bitfield bits in u32Val are all zero + */ +#define AMD_INIT_SETBITS(u32Val, bitfield_val, bitfield_stub_name) \ + ((u32Val) \ + | (((bitfield_val) << ((u32) bitfield_stub_name##_OFS)) \ + & ((u32) bitfield_stub_name##_MASK))) + +/* get bitfield value from u32 u32Val */ +#define AMD_GETBITS(u32Val, bitfield_stub_name) \ + ((u32Val & ((u32) bitfield_stub_name##_MASK)) \ + >> ((u32) bitfield_stub_name##_OFS)) + +/* SET and GET bits in u32 values ------------------------------------------*/ +#define AMD_BIT(bit_stub_name) (1 << bit_stub_name) +#define AMD_UNMASK_BIT(bit_stub_name) (~AMD_BIT(bit_stub_name)) +#define AMD_CLEAR_BIT(bit_stub_name) (~AMD_BIT(bit_stub_name)) + +/* debug macros ------------------------------------------------------------*/ + +#define DBG(udc , args...) dev_dbg(udc->dev, args) + +#ifdef UDC_VERBOSE +#define VDBG DBG +#else +#define VDBG(udc , args...) do {} while (0) +#endif + +#endif /* #ifdef AMD5536UDC_H */ diff --git a/drivers/usb/gadget/udc/amd5536udc_pci.c b/drivers/usb/gadget/udc/amd5536udc_pci.c new file mode 100644 index 000000000..a36913ae3 --- /dev/null +++ b/drivers/usb/gadget/udc/amd5536udc_pci.c @@ -0,0 +1,216 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * amd5536udc_pci.c -- AMD 5536 UDC high/full speed USB device controller + * + * Copyright (C) 2005-2007 AMD (https://www.amd.com) + * Author: Thomas Dahlmann + */ + +/* + * The AMD5536 UDC is part of the x86 southbridge AMD Geode CS5536. + * It is a USB Highspeed DMA capable USB device controller. Beside ep0 it + * provides 4 IN and 4 OUT endpoints (bulk or interrupt type). + * + * Make sure that UDC is assigned to port 4 by BIOS settings (port can also + * be used as host port) and UOC bits PAD_EN and APU are set (should be done + * by BIOS init). + * + * UDC DMA requires 32-bit aligned buffers so DMA with gadget ether does not + * work without updating NET_IP_ALIGN. Or PIO mode (module param "use_dma=0") + * can be used with gadget ether. + * + * This file does pci device registration, and the core driver implementation + * is done in amd5536udc.c + * + * The driver is split so as to use the core UDC driver which is based on + * Synopsys device controller IP (different than HS OTG IP) in UDCs + * integrated to SoC platforms. + * + */ + +/* Driver strings */ +#define UDC_MOD_DESCRIPTION "AMD 5536 UDC - USB Device Controller" + +/* system */ +#include <linux/device.h> +#include <linux/dmapool.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/prefetch.h> +#include <linux/pci.h> + +/* udc specific */ +#include "amd5536udc.h" + +/* pointer to device object */ +static struct udc *udc; + +/* description */ +static const char name[] = "amd5536udc-pci"; + +/* Reset all pci context */ +static void udc_pci_remove(struct pci_dev *pdev) +{ + struct udc *dev; + + dev = pci_get_drvdata(pdev); + + usb_del_gadget_udc(&udc->gadget); + /* gadget driver must not be registered */ + if (WARN_ON(dev->driver)) + return; + + /* dma pool cleanup */ + free_dma_pools(dev); + + /* reset controller */ + writel(AMD_BIT(UDC_DEVCFG_SOFTRESET), &dev->regs->cfg); + free_irq(pdev->irq, dev); + iounmap(dev->virt_addr); + release_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + pci_disable_device(pdev); + + udc_remove(dev); +} + +/* Called by pci bus driver to init pci context */ +static int udc_pci_probe( + struct pci_dev *pdev, + const struct pci_device_id *id +) +{ + struct udc *dev; + unsigned long resource; + unsigned long len; + int retval = 0; + + /* one udc only */ + if (udc) { + dev_dbg(&pdev->dev, "already probed\n"); + return -EBUSY; + } + + /* init */ + dev = kzalloc(sizeof(struct udc), GFP_KERNEL); + if (!dev) + return -ENOMEM; + + /* pci setup */ + if (pci_enable_device(pdev) < 0) { + retval = -ENODEV; + goto err_pcidev; + } + + /* PCI resource allocation */ + resource = pci_resource_start(pdev, 0); + len = pci_resource_len(pdev, 0); + + if (!request_mem_region(resource, len, name)) { + dev_dbg(&pdev->dev, "pci device used already\n"); + retval = -EBUSY; + goto err_memreg; + } + + dev->virt_addr = ioremap(resource, len); + if (!dev->virt_addr) { + dev_dbg(&pdev->dev, "start address cannot be mapped\n"); + retval = -EFAULT; + goto err_ioremap; + } + + if (!pdev->irq) { + dev_err(&pdev->dev, "irq not set\n"); + retval = -ENODEV; + goto err_irq; + } + + spin_lock_init(&dev->lock); + /* udc csr registers base */ + dev->csr = dev->virt_addr + UDC_CSR_ADDR; + /* dev registers base */ + dev->regs = dev->virt_addr + UDC_DEVCFG_ADDR; + /* ep registers base */ + dev->ep_regs = dev->virt_addr + UDC_EPREGS_ADDR; + /* fifo's base */ + dev->rxfifo = (u32 __iomem *)(dev->virt_addr + UDC_RXFIFO_ADDR); + dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR); + + if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) { + dev_dbg(&pdev->dev, "request_irq(%d) fail\n", pdev->irq); + retval = -EBUSY; + goto err_irq; + } + + pci_set_drvdata(pdev, dev); + + /* chip revision for Hs AMD5536 */ + dev->chiprev = pdev->revision; + + pci_set_master(pdev); + pci_try_set_mwi(pdev); + + dev->phys_addr = resource; + dev->irq = pdev->irq; + dev->pdev = pdev; + dev->dev = &pdev->dev; + + /* init dma pools */ + if (use_dma) { + retval = init_dma_pools(dev); + if (retval != 0) + goto err_dma; + } + + /* general probing */ + if (udc_probe(dev)) { + retval = -ENODEV; + goto err_probe; + } + + udc = dev; + + return 0; + +err_probe: + if (use_dma) + free_dma_pools(dev); +err_dma: + free_irq(pdev->irq, dev); +err_irq: + iounmap(dev->virt_addr); +err_ioremap: + release_mem_region(resource, len); +err_memreg: + pci_disable_device(pdev); +err_pcidev: + kfree(dev); + return retval; +} + +/* PCI device parameters */ +static const struct pci_device_id pci_id[] = { + { + PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x2096), + .class = PCI_CLASS_SERIAL_USB_DEVICE, + .class_mask = 0xffffffff, + }, + {}, +}; +MODULE_DEVICE_TABLE(pci, pci_id); + +/* PCI functions */ +static struct pci_driver udc_pci_driver = { + .name = name, + .id_table = pci_id, + .probe = udc_pci_probe, + .remove = udc_pci_remove, +}; +module_pci_driver(udc_pci_driver); + +MODULE_DESCRIPTION(UDC_MOD_DESCRIPTION); +MODULE_AUTHOR("Thomas Dahlmann"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/udc/aspeed-vhub/Kconfig b/drivers/usb/gadget/udc/aspeed-vhub/Kconfig new file mode 100644 index 000000000..605500b19 --- /dev/null +++ b/drivers/usb/gadget/udc/aspeed-vhub/Kconfig @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0+ +config USB_ASPEED_VHUB + tristate "Aspeed vHub UDC driver" + depends on ARCH_ASPEED || COMPILE_TEST + depends on USB_LIBCOMPOSITE + help + USB peripheral controller for the Aspeed AST2400, AST2500 and + AST2600 family SoCs supporting the "vHub" functionality and USB2.0 diff --git a/drivers/usb/gadget/udc/aspeed-vhub/Makefile b/drivers/usb/gadget/udc/aspeed-vhub/Makefile new file mode 100644 index 000000000..9f3add605 --- /dev/null +++ b/drivers/usb/gadget/udc/aspeed-vhub/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0+ +obj-$(CONFIG_USB_ASPEED_VHUB) += aspeed-vhub.o +aspeed-vhub-y := core.o ep0.o epn.o dev.o hub.o + diff --git a/drivers/usb/gadget/udc/aspeed-vhub/core.c b/drivers/usb/gadget/udc/aspeed-vhub/core.c new file mode 100644 index 000000000..7a635c499 --- /dev/null +++ b/drivers/usb/gadget/udc/aspeed-vhub/core.c @@ -0,0 +1,445 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget + * + * core.c - Top level support + * + * Copyright 2017 IBM Corporation + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/prefetch.h> +#include <linux/clk.h> +#include <linux/usb/gadget.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/dma-mapping.h> + +#include "vhub.h" + +void ast_vhub_done(struct ast_vhub_ep *ep, struct ast_vhub_req *req, + int status) +{ + bool internal = req->internal; + struct ast_vhub *vhub = ep->vhub; + + EPVDBG(ep, "completing request @%p, status %d\n", req, status); + + list_del_init(&req->queue); + + if (req->req.status == -EINPROGRESS) + req->req.status = status; + + if (req->req.dma) { + if (!WARN_ON(!ep->dev)) + usb_gadget_unmap_request_by_dev(&vhub->pdev->dev, + &req->req, ep->epn.is_in); + req->req.dma = 0; + } + + /* + * If this isn't an internal EP0 request, call the core + * to call the gadget completion. + */ + if (!internal) { + spin_unlock(&ep->vhub->lock); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&ep->vhub->lock); + } +} + +void ast_vhub_nuke(struct ast_vhub_ep *ep, int status) +{ + struct ast_vhub_req *req; + int count = 0; + + /* Beware, lock will be dropped & req-acquired by done() */ + while (!list_empty(&ep->queue)) { + req = list_first_entry(&ep->queue, struct ast_vhub_req, queue); + ast_vhub_done(ep, req, status); + count++; + } + if (count) + EPDBG(ep, "Nuked %d request(s)\n", count); +} + +struct usb_request *ast_vhub_alloc_request(struct usb_ep *u_ep, + gfp_t gfp_flags) +{ + struct ast_vhub_req *req; + + req = kzalloc(sizeof(*req), gfp_flags); + if (!req) + return NULL; + return &req->req; +} + +void ast_vhub_free_request(struct usb_ep *u_ep, struct usb_request *u_req) +{ + struct ast_vhub_req *req = to_ast_req(u_req); + + kfree(req); +} + +static irqreturn_t ast_vhub_irq(int irq, void *data) +{ + struct ast_vhub *vhub = data; + irqreturn_t iret = IRQ_NONE; + u32 i, istat; + + /* Stale interrupt while tearing down */ + if (!vhub->ep0_bufs) + return IRQ_NONE; + + spin_lock(&vhub->lock); + + /* Read and ACK interrupts */ + istat = readl(vhub->regs + AST_VHUB_ISR); + if (!istat) + goto bail; + writel(istat, vhub->regs + AST_VHUB_ISR); + iret = IRQ_HANDLED; + + UDCVDBG(vhub, "irq status=%08x, ep_acks=%08x ep_nacks=%08x\n", + istat, + readl(vhub->regs + AST_VHUB_EP_ACK_ISR), + readl(vhub->regs + AST_VHUB_EP_NACK_ISR)); + + /* Handle generic EPs first */ + if (istat & VHUB_IRQ_EP_POOL_ACK_STALL) { + u32 ep_acks = readl(vhub->regs + AST_VHUB_EP_ACK_ISR); + writel(ep_acks, vhub->regs + AST_VHUB_EP_ACK_ISR); + + for (i = 0; ep_acks && i < vhub->max_epns; i++) { + u32 mask = VHUB_EP_IRQ(i); + if (ep_acks & mask) { + ast_vhub_epn_ack_irq(&vhub->epns[i]); + ep_acks &= ~mask; + } + } + } + + /* Handle device interrupts */ + if (istat & vhub->port_irq_mask) { + for (i = 0; i < vhub->max_ports; i++) { + if (istat & VHUB_DEV_IRQ(i)) + ast_vhub_dev_irq(&vhub->ports[i].dev); + } + } + + /* Handle top-level vHub EP0 interrupts */ + if (istat & (VHUB_IRQ_HUB_EP0_OUT_ACK_STALL | + VHUB_IRQ_HUB_EP0_IN_ACK_STALL | + VHUB_IRQ_HUB_EP0_SETUP)) { + if (istat & VHUB_IRQ_HUB_EP0_IN_ACK_STALL) + ast_vhub_ep0_handle_ack(&vhub->ep0, true); + if (istat & VHUB_IRQ_HUB_EP0_OUT_ACK_STALL) + ast_vhub_ep0_handle_ack(&vhub->ep0, false); + if (istat & VHUB_IRQ_HUB_EP0_SETUP) + ast_vhub_ep0_handle_setup(&vhub->ep0); + } + + /* Various top level bus events */ + if (istat & (VHUB_IRQ_BUS_RESUME | + VHUB_IRQ_BUS_SUSPEND | + VHUB_IRQ_BUS_RESET)) { + if (istat & VHUB_IRQ_BUS_RESUME) + ast_vhub_hub_resume(vhub); + if (istat & VHUB_IRQ_BUS_SUSPEND) + ast_vhub_hub_suspend(vhub); + if (istat & VHUB_IRQ_BUS_RESET) + ast_vhub_hub_reset(vhub); + } + + bail: + spin_unlock(&vhub->lock); + return iret; +} + +void ast_vhub_init_hw(struct ast_vhub *vhub) +{ + u32 ctrl, port_mask, epn_mask; + + UDCDBG(vhub,"(Re)Starting HW ...\n"); + + /* Enable PHY */ + ctrl = VHUB_CTRL_PHY_CLK | + VHUB_CTRL_PHY_RESET_DIS; + + /* + * We do *NOT* set the VHUB_CTRL_CLK_STOP_SUSPEND bit + * to stop the logic clock during suspend because + * it causes the registers to become inaccessible and + * we haven't yet figured out a good wayt to bring the + * controller back into life to issue a wakeup. + */ + + /* + * Set some ISO & split control bits according to Aspeed + * recommendation + * + * VHUB_CTRL_ISO_RSP_CTRL: When set tells the HW to respond + * with 0 bytes data packet to ISO IN endpoints when no data + * is available. + * + * VHUB_CTRL_SPLIT_IN: This makes a SOF complete a split IN + * transaction. + */ + ctrl |= VHUB_CTRL_ISO_RSP_CTRL | VHUB_CTRL_SPLIT_IN; + writel(ctrl, vhub->regs + AST_VHUB_CTRL); + udelay(1); + + /* Set descriptor ring size */ + if (AST_VHUB_DESCS_COUNT == 256) { + ctrl |= VHUB_CTRL_LONG_DESC; + writel(ctrl, vhub->regs + AST_VHUB_CTRL); + } else { + BUILD_BUG_ON(AST_VHUB_DESCS_COUNT != 32); + } + + /* Reset all devices */ + port_mask = GENMASK(vhub->max_ports, 1); + writel(VHUB_SW_RESET_ROOT_HUB | + VHUB_SW_RESET_DMA_CONTROLLER | + VHUB_SW_RESET_EP_POOL | + port_mask, vhub->regs + AST_VHUB_SW_RESET); + udelay(1); + writel(0, vhub->regs + AST_VHUB_SW_RESET); + + /* Disable and cleanup EP ACK/NACK interrupts */ + epn_mask = GENMASK(vhub->max_epns - 1, 0); + writel(0, vhub->regs + AST_VHUB_EP_ACK_IER); + writel(0, vhub->regs + AST_VHUB_EP_NACK_IER); + writel(epn_mask, vhub->regs + AST_VHUB_EP_ACK_ISR); + writel(epn_mask, vhub->regs + AST_VHUB_EP_NACK_ISR); + + /* Default settings for EP0, enable HW hub EP1 */ + writel(0, vhub->regs + AST_VHUB_EP0_CTRL); + writel(VHUB_EP1_CTRL_RESET_TOGGLE | + VHUB_EP1_CTRL_ENABLE, + vhub->regs + AST_VHUB_EP1_CTRL); + writel(0, vhub->regs + AST_VHUB_EP1_STS_CHG); + + /* Configure EP0 DMA buffer */ + writel(vhub->ep0.buf_dma, vhub->regs + AST_VHUB_EP0_DATA); + + /* Clear address */ + writel(0, vhub->regs + AST_VHUB_CONF); + + /* Pullup hub (activate on host) */ + if (vhub->force_usb1) + ctrl |= VHUB_CTRL_FULL_SPEED_ONLY; + + ctrl |= VHUB_CTRL_UPSTREAM_CONNECT; + writel(ctrl, vhub->regs + AST_VHUB_CTRL); + + /* Enable some interrupts */ + writel(VHUB_IRQ_HUB_EP0_IN_ACK_STALL | + VHUB_IRQ_HUB_EP0_OUT_ACK_STALL | + VHUB_IRQ_HUB_EP0_SETUP | + VHUB_IRQ_EP_POOL_ACK_STALL | + VHUB_IRQ_BUS_RESUME | + VHUB_IRQ_BUS_SUSPEND | + VHUB_IRQ_BUS_RESET, + vhub->regs + AST_VHUB_IER); +} + +static int ast_vhub_remove(struct platform_device *pdev) +{ + struct ast_vhub *vhub = platform_get_drvdata(pdev); + unsigned long flags; + int i; + + if (!vhub || !vhub->regs) + return 0; + + /* Remove devices */ + for (i = 0; i < vhub->max_ports; i++) + ast_vhub_del_dev(&vhub->ports[i].dev); + + spin_lock_irqsave(&vhub->lock, flags); + + /* Mask & ack all interrupts */ + writel(0, vhub->regs + AST_VHUB_IER); + writel(VHUB_IRQ_ACK_ALL, vhub->regs + AST_VHUB_ISR); + + /* Pull device, leave PHY enabled */ + writel(VHUB_CTRL_PHY_CLK | + VHUB_CTRL_PHY_RESET_DIS, + vhub->regs + AST_VHUB_CTRL); + + if (vhub->clk) + clk_disable_unprepare(vhub->clk); + + spin_unlock_irqrestore(&vhub->lock, flags); + + if (vhub->ep0_bufs) + dma_free_coherent(&pdev->dev, + AST_VHUB_EP0_MAX_PACKET * + (vhub->max_ports + 1), + vhub->ep0_bufs, + vhub->ep0_bufs_dma); + vhub->ep0_bufs = NULL; + + return 0; +} + +static int ast_vhub_probe(struct platform_device *pdev) +{ + enum usb_device_speed max_speed; + struct ast_vhub *vhub; + struct resource *res; + int i, rc = 0; + const struct device_node *np = pdev->dev.of_node; + + vhub = devm_kzalloc(&pdev->dev, sizeof(*vhub), GFP_KERNEL); + if (!vhub) + return -ENOMEM; + + rc = of_property_read_u32(np, "aspeed,vhub-downstream-ports", + &vhub->max_ports); + if (rc < 0) + vhub->max_ports = AST_VHUB_NUM_PORTS; + + vhub->ports = devm_kcalloc(&pdev->dev, vhub->max_ports, + sizeof(*vhub->ports), GFP_KERNEL); + if (!vhub->ports) + return -ENOMEM; + + rc = of_property_read_u32(np, "aspeed,vhub-generic-endpoints", + &vhub->max_epns); + if (rc < 0) + vhub->max_epns = AST_VHUB_NUM_GEN_EPs; + + vhub->epns = devm_kcalloc(&pdev->dev, vhub->max_epns, + sizeof(*vhub->epns), GFP_KERNEL); + if (!vhub->epns) + return -ENOMEM; + + spin_lock_init(&vhub->lock); + vhub->pdev = pdev; + vhub->port_irq_mask = GENMASK(VHUB_IRQ_DEV1_BIT + vhub->max_ports - 1, + VHUB_IRQ_DEV1_BIT); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + vhub->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(vhub->regs)) { + dev_err(&pdev->dev, "Failed to map resources\n"); + return PTR_ERR(vhub->regs); + } + UDCDBG(vhub, "vHub@%pR mapped @%p\n", res, vhub->regs); + + platform_set_drvdata(pdev, vhub); + + vhub->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(vhub->clk)) { + rc = PTR_ERR(vhub->clk); + goto err; + } + rc = clk_prepare_enable(vhub->clk); + if (rc) { + dev_err(&pdev->dev, "Error couldn't enable clock (%d)\n", rc); + goto err; + } + + /* Check if we need to limit the HW to USB1 */ + max_speed = usb_get_maximum_speed(&pdev->dev); + if (max_speed != USB_SPEED_UNKNOWN && max_speed < USB_SPEED_HIGH) + vhub->force_usb1 = true; + + /* Mask & ack all interrupts before installing the handler */ + writel(0, vhub->regs + AST_VHUB_IER); + writel(VHUB_IRQ_ACK_ALL, vhub->regs + AST_VHUB_ISR); + + /* Find interrupt and install handler */ + vhub->irq = platform_get_irq(pdev, 0); + if (vhub->irq < 0) { + rc = vhub->irq; + goto err; + } + rc = devm_request_irq(&pdev->dev, vhub->irq, ast_vhub_irq, 0, + KBUILD_MODNAME, vhub); + if (rc) { + dev_err(&pdev->dev, "Failed to request interrupt\n"); + goto err; + } + + /* + * Allocate DMA buffers for all EP0s in one chunk, + * one per port and one for the vHub itself + */ + vhub->ep0_bufs = dma_alloc_coherent(&pdev->dev, + AST_VHUB_EP0_MAX_PACKET * + (vhub->max_ports + 1), + &vhub->ep0_bufs_dma, GFP_KERNEL); + if (!vhub->ep0_bufs) { + dev_err(&pdev->dev, "Failed to allocate EP0 DMA buffers\n"); + rc = -ENOMEM; + goto err; + } + UDCVDBG(vhub, "EP0 DMA buffers @%p (DMA 0x%08x)\n", + vhub->ep0_bufs, (u32)vhub->ep0_bufs_dma); + + /* Init vHub EP0 */ + ast_vhub_init_ep0(vhub, &vhub->ep0, NULL); + + /* Init devices */ + for (i = 0; i < vhub->max_ports && rc == 0; i++) + rc = ast_vhub_init_dev(vhub, i); + if (rc) + goto err; + + /* Init hub emulation */ + rc = ast_vhub_init_hub(vhub); + if (rc) + goto err; + + /* Initialize HW */ + ast_vhub_init_hw(vhub); + + dev_info(&pdev->dev, "Initialized virtual hub in USB%d mode\n", + vhub->force_usb1 ? 1 : 2); + + return 0; + err: + ast_vhub_remove(pdev); + return rc; +} + +static const struct of_device_id ast_vhub_dt_ids[] = { + { + .compatible = "aspeed,ast2400-usb-vhub", + }, + { + .compatible = "aspeed,ast2500-usb-vhub", + }, + { + .compatible = "aspeed,ast2600-usb-vhub", + }, + { } +}; +MODULE_DEVICE_TABLE(of, ast_vhub_dt_ids); + +static struct platform_driver ast_vhub_driver = { + .probe = ast_vhub_probe, + .remove = ast_vhub_remove, + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = ast_vhub_dt_ids, + }, +}; +module_platform_driver(ast_vhub_driver); + +MODULE_DESCRIPTION("Aspeed vHub udc driver"); +MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/udc/aspeed-vhub/dev.c b/drivers/usb/gadget/udc/aspeed-vhub/dev.c new file mode 100644 index 000000000..4f3bc27c1 --- /dev/null +++ b/drivers/usb/gadget/udc/aspeed-vhub/dev.c @@ -0,0 +1,610 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget + * + * dev.c - Individual device/gadget management (ie, a port = a gadget) + * + * Copyright 2017 IBM Corporation + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/prefetch.h> +#include <linux/clk.h> +#include <linux/usb/gadget.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/dma-mapping.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> + +#include "vhub.h" + +void ast_vhub_dev_irq(struct ast_vhub_dev *d) +{ + u32 istat = readl(d->regs + AST_VHUB_DEV_ISR); + + writel(istat, d->regs + AST_VHUB_DEV_ISR); + + if (istat & VHUV_DEV_IRQ_EP0_IN_ACK_STALL) + ast_vhub_ep0_handle_ack(&d->ep0, true); + if (istat & VHUV_DEV_IRQ_EP0_OUT_ACK_STALL) + ast_vhub_ep0_handle_ack(&d->ep0, false); + if (istat & VHUV_DEV_IRQ_EP0_SETUP) + ast_vhub_ep0_handle_setup(&d->ep0); +} + +static void ast_vhub_dev_enable(struct ast_vhub_dev *d) +{ + u32 reg, hmsk, i; + + if (d->enabled) + return; + + /* Cleanup EP0 state */ + ast_vhub_reset_ep0(d); + + /* Enable device and its EP0 interrupts */ + reg = VHUB_DEV_EN_ENABLE_PORT | + VHUB_DEV_EN_EP0_IN_ACK_IRQEN | + VHUB_DEV_EN_EP0_OUT_ACK_IRQEN | + VHUB_DEV_EN_EP0_SETUP_IRQEN; + if (d->gadget.speed == USB_SPEED_HIGH) + reg |= VHUB_DEV_EN_SPEED_SEL_HIGH; + writel(reg, d->regs + AST_VHUB_DEV_EN_CTRL); + + /* Enable device interrupt in the hub as well */ + hmsk = VHUB_IRQ_DEVICE1 << d->index; + reg = readl(d->vhub->regs + AST_VHUB_IER); + reg |= hmsk; + writel(reg, d->vhub->regs + AST_VHUB_IER); + + /* Set EP0 DMA buffer address */ + writel(d->ep0.buf_dma, d->regs + AST_VHUB_DEV_EP0_DATA); + + /* Clear stall on all EPs */ + for (i = 0; i < d->max_epns; i++) { + struct ast_vhub_ep *ep = d->epns[i]; + + if (ep && (ep->epn.stalled || ep->epn.wedged)) { + ep->epn.stalled = false; + ep->epn.wedged = false; + ast_vhub_update_epn_stall(ep); + } + } + + /* Additional cleanups */ + d->wakeup_en = false; + d->enabled = true; +} + +static void ast_vhub_dev_disable(struct ast_vhub_dev *d) +{ + u32 reg, hmsk; + + if (!d->enabled) + return; + + /* Disable device interrupt in the hub */ + hmsk = VHUB_IRQ_DEVICE1 << d->index; + reg = readl(d->vhub->regs + AST_VHUB_IER); + reg &= ~hmsk; + writel(reg, d->vhub->regs + AST_VHUB_IER); + + /* Then disable device */ + writel(0, d->regs + AST_VHUB_DEV_EN_CTRL); + d->gadget.speed = USB_SPEED_UNKNOWN; + d->enabled = false; +} + +static int ast_vhub_dev_feature(struct ast_vhub_dev *d, + u16 wIndex, u16 wValue, + bool is_set) +{ + u32 val; + + DDBG(d, "%s_FEATURE(dev val=%02x)\n", + is_set ? "SET" : "CLEAR", wValue); + + if (wValue == USB_DEVICE_REMOTE_WAKEUP) { + d->wakeup_en = is_set; + return std_req_complete; + } + + if (wValue == USB_DEVICE_TEST_MODE) { + val = readl(d->vhub->regs + AST_VHUB_CTRL); + val &= ~GENMASK(10, 8); + val |= VHUB_CTRL_SET_TEST_MODE((wIndex >> 8) & 0x7); + writel(val, d->vhub->regs + AST_VHUB_CTRL); + + return std_req_complete; + } + + return std_req_driver; +} + +static int ast_vhub_ep_feature(struct ast_vhub_dev *d, + u16 wIndex, u16 wValue, bool is_set) +{ + struct ast_vhub_ep *ep; + int ep_num; + + ep_num = wIndex & USB_ENDPOINT_NUMBER_MASK; + DDBG(d, "%s_FEATURE(ep%d val=%02x)\n", + is_set ? "SET" : "CLEAR", ep_num, wValue); + if (ep_num == 0) + return std_req_complete; + if (ep_num >= d->max_epns || !d->epns[ep_num - 1]) + return std_req_stall; + if (wValue != USB_ENDPOINT_HALT) + return std_req_driver; + + ep = d->epns[ep_num - 1]; + if (WARN_ON(!ep)) + return std_req_stall; + + if (!ep->epn.enabled || !ep->ep.desc || ep->epn.is_iso || + ep->epn.is_in != !!(wIndex & USB_DIR_IN)) + return std_req_stall; + + DDBG(d, "%s stall on EP %d\n", + is_set ? "setting" : "clearing", ep_num); + ep->epn.stalled = is_set; + ast_vhub_update_epn_stall(ep); + + return std_req_complete; +} + +static int ast_vhub_dev_status(struct ast_vhub_dev *d, + u16 wIndex, u16 wValue) +{ + u8 st0; + + DDBG(d, "GET_STATUS(dev)\n"); + + st0 = d->gadget.is_selfpowered << USB_DEVICE_SELF_POWERED; + if (d->wakeup_en) + st0 |= 1 << USB_DEVICE_REMOTE_WAKEUP; + + return ast_vhub_simple_reply(&d->ep0, st0, 0); +} + +static int ast_vhub_ep_status(struct ast_vhub_dev *d, + u16 wIndex, u16 wValue) +{ + int ep_num = wIndex & USB_ENDPOINT_NUMBER_MASK; + struct ast_vhub_ep *ep; + u8 st0 = 0; + + DDBG(d, "GET_STATUS(ep%d)\n", ep_num); + + if (ep_num >= d->max_epns) + return std_req_stall; + if (ep_num != 0) { + ep = d->epns[ep_num - 1]; + if (!ep) + return std_req_stall; + if (!ep->epn.enabled || !ep->ep.desc || ep->epn.is_iso || + ep->epn.is_in != !!(wIndex & USB_DIR_IN)) + return std_req_stall; + if (ep->epn.stalled) + st0 |= 1 << USB_ENDPOINT_HALT; + } + + return ast_vhub_simple_reply(&d->ep0, st0, 0); +} + +static void ast_vhub_dev_set_address(struct ast_vhub_dev *d, u8 addr) +{ + u32 reg; + + DDBG(d, "SET_ADDRESS: Got address %x\n", addr); + + reg = readl(d->regs + AST_VHUB_DEV_EN_CTRL); + reg &= ~VHUB_DEV_EN_ADDR_MASK; + reg |= VHUB_DEV_EN_SET_ADDR(addr); + writel(reg, d->regs + AST_VHUB_DEV_EN_CTRL); +} + +int ast_vhub_std_dev_request(struct ast_vhub_ep *ep, + struct usb_ctrlrequest *crq) +{ + struct ast_vhub_dev *d = ep->dev; + u16 wValue, wIndex; + + /* No driver, we shouldn't be enabled ... */ + if (!d->driver || !d->enabled) { + EPDBG(ep, + "Device is wrong state driver=%p enabled=%d\n", + d->driver, d->enabled); + return std_req_stall; + } + + /* + * Note: we used to reject/stall requests while suspended, + * we don't do that anymore as we seem to have cases of + * mass storage getting very upset. + */ + + /* First packet, grab speed */ + if (d->gadget.speed == USB_SPEED_UNKNOWN) { + d->gadget.speed = ep->vhub->speed; + if (d->gadget.speed > d->driver->max_speed) + d->gadget.speed = d->driver->max_speed; + DDBG(d, "fist packet, captured speed %d\n", + d->gadget.speed); + } + + wValue = le16_to_cpu(crq->wValue); + wIndex = le16_to_cpu(crq->wIndex); + + switch ((crq->bRequestType << 8) | crq->bRequest) { + /* SET_ADDRESS */ + case DeviceOutRequest | USB_REQ_SET_ADDRESS: + ast_vhub_dev_set_address(d, wValue); + return std_req_complete; + + /* GET_STATUS */ + case DeviceRequest | USB_REQ_GET_STATUS: + return ast_vhub_dev_status(d, wIndex, wValue); + case InterfaceRequest | USB_REQ_GET_STATUS: + return ast_vhub_simple_reply(ep, 0, 0); + case EndpointRequest | USB_REQ_GET_STATUS: + return ast_vhub_ep_status(d, wIndex, wValue); + + /* SET/CLEAR_FEATURE */ + case DeviceOutRequest | USB_REQ_SET_FEATURE: + return ast_vhub_dev_feature(d, wIndex, wValue, true); + case DeviceOutRequest | USB_REQ_CLEAR_FEATURE: + return ast_vhub_dev_feature(d, wIndex, wValue, false); + case EndpointOutRequest | USB_REQ_SET_FEATURE: + return ast_vhub_ep_feature(d, wIndex, wValue, true); + case EndpointOutRequest | USB_REQ_CLEAR_FEATURE: + return ast_vhub_ep_feature(d, wIndex, wValue, false); + } + return std_req_driver; +} + +static int ast_vhub_udc_wakeup(struct usb_gadget* gadget) +{ + struct ast_vhub_dev *d = to_ast_dev(gadget); + unsigned long flags; + int rc = -EINVAL; + + spin_lock_irqsave(&d->vhub->lock, flags); + if (!d->wakeup_en) + goto err; + + DDBG(d, "Device initiated wakeup\n"); + + /* Wakeup the host */ + ast_vhub_hub_wake_all(d->vhub); + rc = 0; + err: + spin_unlock_irqrestore(&d->vhub->lock, flags); + return rc; +} + +static int ast_vhub_udc_get_frame(struct usb_gadget* gadget) +{ + struct ast_vhub_dev *d = to_ast_dev(gadget); + + return (readl(d->vhub->regs + AST_VHUB_USBSTS) >> 16) & 0x7ff; +} + +static void ast_vhub_dev_nuke(struct ast_vhub_dev *d) +{ + unsigned int i; + + for (i = 0; i < d->max_epns; i++) { + if (!d->epns[i]) + continue; + ast_vhub_nuke(d->epns[i], -ESHUTDOWN); + } +} + +static int ast_vhub_udc_pullup(struct usb_gadget* gadget, int on) +{ + struct ast_vhub_dev *d = to_ast_dev(gadget); + unsigned long flags; + + spin_lock_irqsave(&d->vhub->lock, flags); + + DDBG(d, "pullup(%d)\n", on); + + /* Mark disconnected in the hub */ + ast_vhub_device_connect(d->vhub, d->index, on); + + /* + * If enabled, nuke all requests if any (there shouldn't be) + * and disable the port. This will clear the address too. + */ + if (d->enabled) { + ast_vhub_dev_nuke(d); + ast_vhub_dev_disable(d); + } + + spin_unlock_irqrestore(&d->vhub->lock, flags); + + return 0; +} + +static int ast_vhub_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct ast_vhub_dev *d = to_ast_dev(gadget); + unsigned long flags; + + spin_lock_irqsave(&d->vhub->lock, flags); + + DDBG(d, "start\n"); + + /* We don't do much more until the hub enables us */ + d->driver = driver; + d->gadget.is_selfpowered = 1; + + spin_unlock_irqrestore(&d->vhub->lock, flags); + + return 0; +} + +static struct usb_ep *ast_vhub_udc_match_ep(struct usb_gadget *gadget, + struct usb_endpoint_descriptor *desc, + struct usb_ss_ep_comp_descriptor *ss) +{ + struct ast_vhub_dev *d = to_ast_dev(gadget); + struct ast_vhub_ep *ep; + struct usb_ep *u_ep; + unsigned int max, addr, i; + + DDBG(d, "Match EP type %d\n", usb_endpoint_type(desc)); + + /* + * First we need to look for an existing unclaimed EP as another + * configuration may have already associated a bunch of EPs with + * this gadget. This duplicates the code in usb_ep_autoconfig_ss() + * unfortunately. + */ + list_for_each_entry(u_ep, &gadget->ep_list, ep_list) { + if (usb_gadget_ep_match_desc(gadget, u_ep, desc, ss)) { + DDBG(d, " -> using existing EP%d\n", + to_ast_ep(u_ep)->d_idx); + return u_ep; + } + } + + /* + * We didn't find one, we need to grab one from the pool. + * + * First let's do some sanity checking + */ + switch(usb_endpoint_type(desc)) { + case USB_ENDPOINT_XFER_CONTROL: + /* Only EP0 can be a control endpoint */ + return NULL; + case USB_ENDPOINT_XFER_ISOC: + /* ISO: limit 1023 bytes full speed, 1024 high/super speed */ + if (gadget_is_dualspeed(gadget)) + max = 1024; + else + max = 1023; + break; + case USB_ENDPOINT_XFER_BULK: + if (gadget_is_dualspeed(gadget)) + max = 512; + else + max = 64; + break; + case USB_ENDPOINT_XFER_INT: + if (gadget_is_dualspeed(gadget)) + max = 1024; + else + max = 64; + break; + } + if (usb_endpoint_maxp(desc) > max) + return NULL; + + /* + * Find a free EP address for that device. We can't + * let the generic code assign these as it would + * create overlapping numbers for IN and OUT which + * we don't support, so also create a suitable name + * that will allow the generic code to use our + * assigned address. + */ + for (i = 0; i < d->max_epns; i++) + if (d->epns[i] == NULL) + break; + if (i >= d->max_epns) + return NULL; + addr = i + 1; + + /* + * Now grab an EP from the shared pool and associate + * it with our device + */ + ep = ast_vhub_alloc_epn(d, addr); + if (!ep) + return NULL; + DDBG(d, "Allocated epn#%d for port EP%d\n", + ep->epn.g_idx, addr); + + return &ep->ep; +} + +static int ast_vhub_udc_stop(struct usb_gadget *gadget) +{ + struct ast_vhub_dev *d = to_ast_dev(gadget); + unsigned long flags; + + spin_lock_irqsave(&d->vhub->lock, flags); + + DDBG(d, "stop\n"); + + d->driver = NULL; + d->gadget.speed = USB_SPEED_UNKNOWN; + + ast_vhub_dev_nuke(d); + + if (d->enabled) + ast_vhub_dev_disable(d); + + spin_unlock_irqrestore(&d->vhub->lock, flags); + + return 0; +} + +static const struct usb_gadget_ops ast_vhub_udc_ops = { + .get_frame = ast_vhub_udc_get_frame, + .wakeup = ast_vhub_udc_wakeup, + .pullup = ast_vhub_udc_pullup, + .udc_start = ast_vhub_udc_start, + .udc_stop = ast_vhub_udc_stop, + .match_ep = ast_vhub_udc_match_ep, +}; + +void ast_vhub_dev_suspend(struct ast_vhub_dev *d) +{ + if (d->driver && d->driver->suspend) { + spin_unlock(&d->vhub->lock); + d->driver->suspend(&d->gadget); + spin_lock(&d->vhub->lock); + } +} + +void ast_vhub_dev_resume(struct ast_vhub_dev *d) +{ + if (d->driver && d->driver->resume) { + spin_unlock(&d->vhub->lock); + d->driver->resume(&d->gadget); + spin_lock(&d->vhub->lock); + } +} + +void ast_vhub_dev_reset(struct ast_vhub_dev *d) +{ + /* No driver, just disable the device and return */ + if (!d->driver) { + ast_vhub_dev_disable(d); + return; + } + + /* If the port isn't enabled, just enable it */ + if (!d->enabled) { + DDBG(d, "Reset of disabled device, enabling...\n"); + ast_vhub_dev_enable(d); + } else { + DDBG(d, "Reset of enabled device, resetting...\n"); + spin_unlock(&d->vhub->lock); + usb_gadget_udc_reset(&d->gadget, d->driver); + spin_lock(&d->vhub->lock); + + /* + * Disable and maybe re-enable HW, this will clear the address + * and speed setting. + */ + ast_vhub_dev_disable(d); + ast_vhub_dev_enable(d); + } +} + +void ast_vhub_del_dev(struct ast_vhub_dev *d) +{ + unsigned long flags; + + spin_lock_irqsave(&d->vhub->lock, flags); + if (!d->registered) { + spin_unlock_irqrestore(&d->vhub->lock, flags); + return; + } + d->registered = false; + spin_unlock_irqrestore(&d->vhub->lock, flags); + + usb_del_gadget_udc(&d->gadget); + device_unregister(d->port_dev); + kfree(d->epns); +} + +static void ast_vhub_dev_release(struct device *dev) +{ + kfree(dev); +} + +int ast_vhub_init_dev(struct ast_vhub *vhub, unsigned int idx) +{ + struct ast_vhub_dev *d = &vhub->ports[idx].dev; + struct device *parent = &vhub->pdev->dev; + int rc; + + d->vhub = vhub; + d->index = idx; + d->name = devm_kasprintf(parent, GFP_KERNEL, "port%d", idx+1); + d->regs = vhub->regs + 0x100 + 0x10 * idx; + + ast_vhub_init_ep0(vhub, &d->ep0, d); + + /* + * A USB device can have up to 30 endpoints besides control + * endpoint 0. + */ + d->max_epns = min_t(u32, vhub->max_epns, 30); + d->epns = kcalloc(d->max_epns, sizeof(*d->epns), GFP_KERNEL); + if (!d->epns) + return -ENOMEM; + + /* + * The UDC core really needs us to have separate and uniquely + * named "parent" devices for each port so we create a sub device + * here for that purpose + */ + d->port_dev = kzalloc(sizeof(struct device), GFP_KERNEL); + if (!d->port_dev) { + rc = -ENOMEM; + goto fail_alloc; + } + device_initialize(d->port_dev); + d->port_dev->release = ast_vhub_dev_release; + d->port_dev->parent = parent; + dev_set_name(d->port_dev, "%s:p%d", dev_name(parent), idx + 1); + rc = device_add(d->port_dev); + if (rc) + goto fail_add; + + /* Populate gadget */ + INIT_LIST_HEAD(&d->gadget.ep_list); + d->gadget.ops = &ast_vhub_udc_ops; + d->gadget.ep0 = &d->ep0.ep; + d->gadget.name = KBUILD_MODNAME; + if (vhub->force_usb1) + d->gadget.max_speed = USB_SPEED_FULL; + else + d->gadget.max_speed = USB_SPEED_HIGH; + d->gadget.speed = USB_SPEED_UNKNOWN; + d->gadget.dev.of_node = vhub->pdev->dev.of_node; + d->gadget.dev.of_node_reused = true; + + rc = usb_add_gadget_udc(d->port_dev, &d->gadget); + if (rc != 0) + goto fail_udc; + d->registered = true; + + return 0; + fail_udc: + device_del(d->port_dev); + fail_add: + put_device(d->port_dev); + fail_alloc: + kfree(d->epns); + + return rc; +} diff --git a/drivers/usb/gadget/udc/aspeed-vhub/ep0.c b/drivers/usb/gadget/udc/aspeed-vhub/ep0.c new file mode 100644 index 000000000..b4cf46249 --- /dev/null +++ b/drivers/usb/gadget/udc/aspeed-vhub/ep0.c @@ -0,0 +1,522 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget + * + * ep0.c - Endpoint 0 handling + * + * Copyright 2017 IBM Corporation + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/prefetch.h> +#include <linux/clk.h> +#include <linux/usb/gadget.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/dma-mapping.h> + +#include "vhub.h" + +int ast_vhub_reply(struct ast_vhub_ep *ep, char *ptr, int len) +{ + struct usb_request *req = &ep->ep0.req.req; + int rc; + + if (WARN_ON(ep->d_idx != 0)) + return std_req_stall; + if (WARN_ON(!ep->ep0.dir_in)) + return std_req_stall; + if (WARN_ON(len > AST_VHUB_EP0_MAX_PACKET)) + return std_req_stall; + if (WARN_ON(req->status == -EINPROGRESS)) + return std_req_stall; + + req->buf = ptr; + req->length = len; + req->complete = NULL; + req->zero = true; + + /* + * Call internal queue directly after dropping the lock. This is + * safe to do as the reply is always the last thing done when + * processing a SETUP packet, usually as a tail call + */ + spin_unlock(&ep->vhub->lock); + if (ep->ep.ops->queue(&ep->ep, req, GFP_ATOMIC)) + rc = std_req_stall; + else + rc = std_req_data; + spin_lock(&ep->vhub->lock); + return rc; +} + +int __ast_vhub_simple_reply(struct ast_vhub_ep *ep, int len, ...) +{ + u8 *buffer = ep->buf; + unsigned int i; + va_list args; + + va_start(args, len); + + /* Copy data directly into EP buffer */ + for (i = 0; i < len; i++) + buffer[i] = va_arg(args, int); + va_end(args); + + /* req->buf NULL means data is already there */ + return ast_vhub_reply(ep, NULL, len); +} + +void ast_vhub_ep0_handle_setup(struct ast_vhub_ep *ep) +{ + struct usb_ctrlrequest crq; + enum std_req_rc std_req_rc; + int rc = -ENODEV; + + if (WARN_ON(ep->d_idx != 0)) + return; + + /* + * Grab the setup packet from the chip and byteswap + * interesting fields + */ + memcpy_fromio(&crq, ep->ep0.setup, sizeof(crq)); + + EPDBG(ep, "SETUP packet %02x/%02x/%04x/%04x/%04x [%s] st=%d\n", + crq.bRequestType, crq.bRequest, + le16_to_cpu(crq.wValue), + le16_to_cpu(crq.wIndex), + le16_to_cpu(crq.wLength), + (crq.bRequestType & USB_DIR_IN) ? "in" : "out", + ep->ep0.state); + + /* + * Check our state, cancel pending requests if needed + * + * Note: Under some circumstances, we can get a new setup + * packet while waiting for the stall ack, just accept it. + * + * In any case, a SETUP packet in wrong state should have + * reset the HW state machine, so let's just log, nuke + * requests, move on. + */ + if (ep->ep0.state != ep0_state_token && + ep->ep0.state != ep0_state_stall) { + EPDBG(ep, "wrong state\n"); + ast_vhub_nuke(ep, -EIO); + } + + /* Calculate next state for EP0 */ + ep->ep0.state = ep0_state_data; + ep->ep0.dir_in = !!(crq.bRequestType & USB_DIR_IN); + + /* If this is the vHub, we handle requests differently */ + std_req_rc = std_req_driver; + if (ep->dev == NULL) { + if ((crq.bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) + std_req_rc = ast_vhub_std_hub_request(ep, &crq); + else if ((crq.bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS) + std_req_rc = ast_vhub_class_hub_request(ep, &crq); + else + std_req_rc = std_req_stall; + } else if ((crq.bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) + std_req_rc = ast_vhub_std_dev_request(ep, &crq); + + /* Act upon result */ + switch(std_req_rc) { + case std_req_complete: + goto complete; + case std_req_stall: + goto stall; + case std_req_driver: + break; + case std_req_data: + return; + } + + /* Pass request up to the gadget driver */ + if (WARN_ON(!ep->dev)) + goto stall; + if (ep->dev->driver) { + EPDBG(ep, "forwarding to gadget...\n"); + spin_unlock(&ep->vhub->lock); + rc = ep->dev->driver->setup(&ep->dev->gadget, &crq); + spin_lock(&ep->vhub->lock); + EPDBG(ep, "driver returned %d\n", rc); + } else { + EPDBG(ep, "no gadget for request !\n"); + } + if (rc >= 0) + return; + + stall: + EPDBG(ep, "stalling\n"); + writel(VHUB_EP0_CTRL_STALL, ep->ep0.ctlstat); + ep->ep0.state = ep0_state_stall; + ep->ep0.dir_in = false; + return; + + complete: + EPVDBG(ep, "sending [in] status with no data\n"); + writel(VHUB_EP0_TX_BUFF_RDY, ep->ep0.ctlstat); + ep->ep0.state = ep0_state_status; + ep->ep0.dir_in = false; +} + + +static void ast_vhub_ep0_do_send(struct ast_vhub_ep *ep, + struct ast_vhub_req *req) +{ + unsigned int chunk; + u32 reg; + + /* If this is a 0-length request, it's the gadget trying to + * send a status on our behalf. We take it from here. + */ + if (req->req.length == 0) + req->last_desc = 1; + + /* Are we done ? Complete request, otherwise wait for next interrupt */ + if (req->last_desc >= 0) { + EPVDBG(ep, "complete send %d/%d\n", + req->req.actual, req->req.length); + ep->ep0.state = ep0_state_status; + writel(VHUB_EP0_RX_BUFF_RDY, ep->ep0.ctlstat); + ast_vhub_done(ep, req, 0); + return; + } + + /* + * Next chunk cropped to max packet size. Also check if this + * is the last packet + */ + chunk = req->req.length - req->req.actual; + if (chunk > ep->ep.maxpacket) + chunk = ep->ep.maxpacket; + else if ((chunk < ep->ep.maxpacket) || !req->req.zero) + req->last_desc = 1; + + EPVDBG(ep, "send chunk=%d last=%d, req->act=%d mp=%d\n", + chunk, req->last_desc, req->req.actual, ep->ep.maxpacket); + + /* + * Copy data if any (internal requests already have data + * in the EP buffer) + */ + if (chunk && req->req.buf) + memcpy(ep->buf, req->req.buf + req->req.actual, chunk); + + vhub_dma_workaround(ep->buf); + + /* Remember chunk size and trigger send */ + reg = VHUB_EP0_SET_TX_LEN(chunk); + writel(reg, ep->ep0.ctlstat); + writel(reg | VHUB_EP0_TX_BUFF_RDY, ep->ep0.ctlstat); + req->req.actual += chunk; +} + +static void ast_vhub_ep0_rx_prime(struct ast_vhub_ep *ep) +{ + EPVDBG(ep, "rx prime\n"); + + /* Prime endpoint for receiving data */ + writel(VHUB_EP0_RX_BUFF_RDY, ep->ep0.ctlstat); +} + +static void ast_vhub_ep0_do_receive(struct ast_vhub_ep *ep, struct ast_vhub_req *req, + unsigned int len) +{ + unsigned int remain; + int rc = 0; + + /* We are receiving... grab request */ + remain = req->req.length - req->req.actual; + + EPVDBG(ep, "receive got=%d remain=%d\n", len, remain); + + /* Are we getting more than asked ? */ + if (len > remain) { + EPDBG(ep, "receiving too much (ovf: %d) !\n", + len - remain); + len = remain; + rc = -EOVERFLOW; + } + + /* Hardware return wrong data len */ + if (len < ep->ep.maxpacket && len != remain) { + EPDBG(ep, "using expected data len instead\n"); + len = remain; + } + + if (len && req->req.buf) + memcpy(req->req.buf + req->req.actual, ep->buf, len); + req->req.actual += len; + + /* Done ? */ + if (len < ep->ep.maxpacket || len == remain) { + ep->ep0.state = ep0_state_status; + writel(VHUB_EP0_TX_BUFF_RDY, ep->ep0.ctlstat); + ast_vhub_done(ep, req, rc); + } else + ast_vhub_ep0_rx_prime(ep); +} + +void ast_vhub_ep0_handle_ack(struct ast_vhub_ep *ep, bool in_ack) +{ + struct ast_vhub_req *req; + struct ast_vhub *vhub = ep->vhub; + struct device *dev = &vhub->pdev->dev; + bool stall = false; + u32 stat; + + /* Read EP0 status */ + stat = readl(ep->ep0.ctlstat); + + /* Grab current request if any */ + req = list_first_entry_or_null(&ep->queue, struct ast_vhub_req, queue); + + EPVDBG(ep, "ACK status=%08x,state=%d is_in=%d in_ack=%d req=%p\n", + stat, ep->ep0.state, ep->ep0.dir_in, in_ack, req); + + switch(ep->ep0.state) { + case ep0_state_token: + /* There should be no request queued in that state... */ + if (req) { + dev_warn(dev, "request present while in TOKEN state\n"); + ast_vhub_nuke(ep, -EINVAL); + } + dev_warn(dev, "ack while in TOKEN state\n"); + stall = true; + break; + case ep0_state_data: + /* Check the state bits corresponding to our direction */ + if ((ep->ep0.dir_in && (stat & VHUB_EP0_TX_BUFF_RDY)) || + (!ep->ep0.dir_in && (stat & VHUB_EP0_RX_BUFF_RDY)) || + (ep->ep0.dir_in != in_ack)) { + /* In that case, ignore interrupt */ + dev_warn(dev, "irq state mismatch"); + break; + } + /* + * We are in data phase and there's no request, something is + * wrong, stall + */ + if (!req) { + dev_warn(dev, "data phase, no request\n"); + stall = true; + break; + } + + /* We have a request, handle data transfers */ + if (ep->ep0.dir_in) + ast_vhub_ep0_do_send(ep, req); + else + ast_vhub_ep0_do_receive(ep, req, VHUB_EP0_RX_LEN(stat)); + return; + case ep0_state_status: + /* Nuke stale requests */ + if (req) { + dev_warn(dev, "request present while in STATUS state\n"); + ast_vhub_nuke(ep, -EINVAL); + } + + /* + * If the status phase completes with the wrong ack, stall + * the endpoint just in case, to abort whatever the host + * was doing. + */ + if (ep->ep0.dir_in == in_ack) { + dev_warn(dev, "status direction mismatch\n"); + stall = true; + } + break; + case ep0_state_stall: + /* + * There shouldn't be any request left, but nuke just in case + * otherwise the stale request will block subsequent ones + */ + ast_vhub_nuke(ep, -EIO); + break; + } + + /* Reset to token state or stall */ + if (stall) { + writel(VHUB_EP0_CTRL_STALL, ep->ep0.ctlstat); + ep->ep0.state = ep0_state_stall; + } else + ep->ep0.state = ep0_state_token; +} + +static int ast_vhub_ep0_queue(struct usb_ep* u_ep, struct usb_request *u_req, + gfp_t gfp_flags) +{ + struct ast_vhub_req *req = to_ast_req(u_req); + struct ast_vhub_ep *ep = to_ast_ep(u_ep); + struct ast_vhub *vhub = ep->vhub; + struct device *dev = &vhub->pdev->dev; + unsigned long flags; + + /* Paranoid cheks */ + if (!u_req || (!u_req->complete && !req->internal)) { + dev_warn(dev, "Bogus EP0 request ! u_req=%p\n", u_req); + if (u_req) { + dev_warn(dev, "complete=%p internal=%d\n", + u_req->complete, req->internal); + } + return -EINVAL; + } + + /* Not endpoint 0 ? */ + if (WARN_ON(ep->d_idx != 0)) + return -EINVAL; + + /* Disabled device */ + if (ep->dev && !ep->dev->enabled) + return -ESHUTDOWN; + + /* Data, no buffer and not internal ? */ + if (u_req->length && !u_req->buf && !req->internal) { + dev_warn(dev, "Request with no buffer !\n"); + return -EINVAL; + } + + EPVDBG(ep, "enqueue req @%p\n", req); + EPVDBG(ep, " l=%d zero=%d noshort=%d is_in=%d\n", + u_req->length, u_req->zero, + u_req->short_not_ok, ep->ep0.dir_in); + + /* Initialize request progress fields */ + u_req->status = -EINPROGRESS; + u_req->actual = 0; + req->last_desc = -1; + req->active = false; + + spin_lock_irqsave(&vhub->lock, flags); + + /* EP0 can only support a single request at a time */ + if (!list_empty(&ep->queue) || + ep->ep0.state == ep0_state_token || + ep->ep0.state == ep0_state_stall) { + dev_warn(dev, "EP0: Request in wrong state\n"); + EPVDBG(ep, "EP0: list_empty=%d state=%d\n", + list_empty(&ep->queue), ep->ep0.state); + spin_unlock_irqrestore(&vhub->lock, flags); + return -EBUSY; + } + + /* Add request to list and kick processing if empty */ + list_add_tail(&req->queue, &ep->queue); + + if (ep->ep0.dir_in) { + /* IN request, send data */ + ast_vhub_ep0_do_send(ep, req); + } else if (u_req->length == 0) { + /* 0-len request, send completion as rx */ + EPVDBG(ep, "0-length rx completion\n"); + ep->ep0.state = ep0_state_status; + writel(VHUB_EP0_TX_BUFF_RDY, ep->ep0.ctlstat); + ast_vhub_done(ep, req, 0); + } else { + /* OUT request, start receiver */ + ast_vhub_ep0_rx_prime(ep); + } + + spin_unlock_irqrestore(&vhub->lock, flags); + + return 0; +} + +static int ast_vhub_ep0_dequeue(struct usb_ep* u_ep, struct usb_request *u_req) +{ + struct ast_vhub_ep *ep = to_ast_ep(u_ep); + struct ast_vhub *vhub = ep->vhub; + struct ast_vhub_req *req; + unsigned long flags; + int rc = -EINVAL; + + spin_lock_irqsave(&vhub->lock, flags); + + /* Only one request can be in the queue */ + req = list_first_entry_or_null(&ep->queue, struct ast_vhub_req, queue); + + /* Is it ours ? */ + if (req && u_req == &req->req) { + EPVDBG(ep, "dequeue req @%p\n", req); + + /* + * We don't have to deal with "active" as all + * DMAs go to the EP buffers, not the request. + */ + ast_vhub_done(ep, req, -ECONNRESET); + + /* We do stall the EP to clean things up in HW */ + writel(VHUB_EP0_CTRL_STALL, ep->ep0.ctlstat); + ep->ep0.state = ep0_state_status; + ep->ep0.dir_in = false; + rc = 0; + } + spin_unlock_irqrestore(&vhub->lock, flags); + return rc; +} + + +static const struct usb_ep_ops ast_vhub_ep0_ops = { + .queue = ast_vhub_ep0_queue, + .dequeue = ast_vhub_ep0_dequeue, + .alloc_request = ast_vhub_alloc_request, + .free_request = ast_vhub_free_request, +}; + +void ast_vhub_reset_ep0(struct ast_vhub_dev *dev) +{ + struct ast_vhub_ep *ep = &dev->ep0; + + ast_vhub_nuke(ep, -EIO); + ep->ep0.state = ep0_state_token; +} + + +void ast_vhub_init_ep0(struct ast_vhub *vhub, struct ast_vhub_ep *ep, + struct ast_vhub_dev *dev) +{ + memset(ep, 0, sizeof(*ep)); + + INIT_LIST_HEAD(&ep->ep.ep_list); + INIT_LIST_HEAD(&ep->queue); + ep->ep.ops = &ast_vhub_ep0_ops; + ep->ep.name = "ep0"; + ep->ep.caps.type_control = true; + usb_ep_set_maxpacket_limit(&ep->ep, AST_VHUB_EP0_MAX_PACKET); + ep->d_idx = 0; + ep->dev = dev; + ep->vhub = vhub; + ep->ep0.state = ep0_state_token; + INIT_LIST_HEAD(&ep->ep0.req.queue); + ep->ep0.req.internal = true; + + /* Small difference between vHub and devices */ + if (dev) { + ep->ep0.ctlstat = dev->regs + AST_VHUB_DEV_EP0_CTRL; + ep->ep0.setup = vhub->regs + + AST_VHUB_SETUP0 + 8 * (dev->index + 1); + ep->buf = vhub->ep0_bufs + + AST_VHUB_EP0_MAX_PACKET * (dev->index + 1); + ep->buf_dma = vhub->ep0_bufs_dma + + AST_VHUB_EP0_MAX_PACKET * (dev->index + 1); + } else { + ep->ep0.ctlstat = vhub->regs + AST_VHUB_EP0_CTRL; + ep->ep0.setup = vhub->regs + AST_VHUB_SETUP0; + ep->buf = vhub->ep0_bufs; + ep->buf_dma = vhub->ep0_bufs_dma; + } +} diff --git a/drivers/usb/gadget/udc/aspeed-vhub/epn.c b/drivers/usb/gadget/udc/aspeed-vhub/epn.c new file mode 100644 index 000000000..b5252880b --- /dev/null +++ b/drivers/usb/gadget/udc/aspeed-vhub/epn.c @@ -0,0 +1,847 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget + * + * epn.c - Generic endpoints management + * + * Copyright 2017 IBM Corporation + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/prefetch.h> +#include <linux/clk.h> +#include <linux/usb/gadget.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/dma-mapping.h> + +#include "vhub.h" + +#define EXTRA_CHECKS + +#ifdef EXTRA_CHECKS +#define CHECK(ep, expr, fmt...) \ + do { \ + if (!(expr)) EPDBG(ep, "CHECK:" fmt); \ + } while(0) +#else +#define CHECK(ep, expr, fmt...) do { } while(0) +#endif + +static void ast_vhub_epn_kick(struct ast_vhub_ep *ep, struct ast_vhub_req *req) +{ + unsigned int act = req->req.actual; + unsigned int len = req->req.length; + unsigned int chunk; + + /* There should be no DMA ongoing */ + WARN_ON(req->active); + + /* Calculate next chunk size */ + chunk = len - act; + if (chunk > ep->ep.maxpacket) + chunk = ep->ep.maxpacket; + else if ((chunk < ep->ep.maxpacket) || !req->req.zero) + req->last_desc = 1; + + EPVDBG(ep, "kick req %p act=%d/%d chunk=%d last=%d\n", + req, act, len, chunk, req->last_desc); + + /* If DMA unavailable, using staging EP buffer */ + if (!req->req.dma) { + + /* For IN transfers, copy data over first */ + if (ep->epn.is_in) { + memcpy(ep->buf, req->req.buf + act, chunk); + vhub_dma_workaround(ep->buf); + } + writel(ep->buf_dma, ep->epn.regs + AST_VHUB_EP_DESC_BASE); + } else { + if (ep->epn.is_in) + vhub_dma_workaround(req->req.buf); + writel(req->req.dma + act, ep->epn.regs + AST_VHUB_EP_DESC_BASE); + } + + /* Start DMA */ + req->active = true; + writel(VHUB_EP_DMA_SET_TX_SIZE(chunk), + ep->epn.regs + AST_VHUB_EP_DESC_STATUS); + writel(VHUB_EP_DMA_SET_TX_SIZE(chunk) | VHUB_EP_DMA_SINGLE_KICK, + ep->epn.regs + AST_VHUB_EP_DESC_STATUS); +} + +static void ast_vhub_epn_handle_ack(struct ast_vhub_ep *ep) +{ + struct ast_vhub_req *req; + unsigned int len; + u32 stat; + + /* Read EP status */ + stat = readl(ep->epn.regs + AST_VHUB_EP_DESC_STATUS); + + /* Grab current request if any */ + req = list_first_entry_or_null(&ep->queue, struct ast_vhub_req, queue); + + EPVDBG(ep, "ACK status=%08x is_in=%d, req=%p (active=%d)\n", + stat, ep->epn.is_in, req, req ? req->active : 0); + + /* In absence of a request, bail out, must have been dequeued */ + if (!req) + return; + + /* + * Request not active, move on to processing queue, active request + * was probably dequeued + */ + if (!req->active) + goto next_chunk; + + /* Check if HW has moved on */ + if (VHUB_EP_DMA_RPTR(stat) != 0) { + EPDBG(ep, "DMA read pointer not 0 !\n"); + return; + } + + /* No current DMA ongoing */ + req->active = false; + + /* Grab length out of HW */ + len = VHUB_EP_DMA_TX_SIZE(stat); + + /* If not using DMA, copy data out if needed */ + if (!req->req.dma && !ep->epn.is_in && len) + memcpy(req->req.buf + req->req.actual, ep->buf, len); + + /* Adjust size */ + req->req.actual += len; + + /* Check for short packet */ + if (len < ep->ep.maxpacket) + req->last_desc = 1; + + /* That's it ? complete the request and pick a new one */ + if (req->last_desc >= 0) { + ast_vhub_done(ep, req, 0); + req = list_first_entry_or_null(&ep->queue, struct ast_vhub_req, + queue); + + /* + * Due to lock dropping inside "done" the next request could + * already be active, so check for that and bail if needed. + */ + if (!req || req->active) + return; + } + + next_chunk: + ast_vhub_epn_kick(ep, req); +} + +static inline unsigned int ast_vhub_count_free_descs(struct ast_vhub_ep *ep) +{ + /* + * d_next == d_last means descriptor list empty to HW, + * thus we can only have AST_VHUB_DESCS_COUNT-1 descriptors + * in the list + */ + return (ep->epn.d_last + AST_VHUB_DESCS_COUNT - ep->epn.d_next - 1) & + (AST_VHUB_DESCS_COUNT - 1); +} + +static void ast_vhub_epn_kick_desc(struct ast_vhub_ep *ep, + struct ast_vhub_req *req) +{ + struct ast_vhub_desc *desc = NULL; + unsigned int act = req->act_count; + unsigned int len = req->req.length; + unsigned int chunk; + + /* Mark request active if not already */ + req->active = true; + + /* If the request was already completely written, do nothing */ + if (req->last_desc >= 0) + return; + + EPVDBG(ep, "kick act=%d/%d chunk_max=%d free_descs=%d\n", + act, len, ep->epn.chunk_max, ast_vhub_count_free_descs(ep)); + + /* While we can create descriptors */ + while (ast_vhub_count_free_descs(ep) && req->last_desc < 0) { + unsigned int d_num; + + /* Grab next free descriptor */ + d_num = ep->epn.d_next; + desc = &ep->epn.descs[d_num]; + ep->epn.d_next = (d_num + 1) & (AST_VHUB_DESCS_COUNT - 1); + + /* Calculate next chunk size */ + chunk = len - act; + if (chunk <= ep->epn.chunk_max) { + /* + * Is this the last packet ? Because of having up to 8 + * packets in a descriptor we can't just compare "chunk" + * with ep.maxpacket. We have to see if it's a multiple + * of it to know if we have to send a zero packet. + * Sadly that involves a modulo which is a bit expensive + * but probably still better than not doing it. + */ + if (!chunk || !req->req.zero || (chunk % ep->ep.maxpacket) != 0) + req->last_desc = d_num; + } else { + chunk = ep->epn.chunk_max; + } + + EPVDBG(ep, " chunk: act=%d/%d chunk=%d last=%d desc=%d free=%d\n", + act, len, chunk, req->last_desc, d_num, + ast_vhub_count_free_descs(ep)); + + /* Populate descriptor */ + desc->w0 = cpu_to_le32(req->req.dma + act); + + /* Interrupt if end of request or no more descriptors */ + + /* + * TODO: Be smarter about it, if we don't have enough + * descriptors request an interrupt before queue empty + * or so in order to be able to populate more before + * the HW runs out. This isn't a problem at the moment + * as we use 256 descriptors and only put at most one + * request in the ring. + */ + desc->w1 = cpu_to_le32(VHUB_DSC1_IN_SET_LEN(chunk)); + if (req->last_desc >= 0 || !ast_vhub_count_free_descs(ep)) + desc->w1 |= cpu_to_le32(VHUB_DSC1_IN_INTERRUPT); + + /* Account packet */ + req->act_count = act = act + chunk; + } + + if (likely(desc)) + vhub_dma_workaround(desc); + + /* Tell HW about new descriptors */ + writel(VHUB_EP_DMA_SET_CPU_WPTR(ep->epn.d_next), + ep->epn.regs + AST_VHUB_EP_DESC_STATUS); + + EPVDBG(ep, "HW kicked, d_next=%d dstat=%08x\n", + ep->epn.d_next, readl(ep->epn.regs + AST_VHUB_EP_DESC_STATUS)); +} + +static void ast_vhub_epn_handle_ack_desc(struct ast_vhub_ep *ep) +{ + struct ast_vhub_req *req; + unsigned int len, d_last; + u32 stat, stat1; + + /* Read EP status, workaround HW race */ + do { + stat = readl(ep->epn.regs + AST_VHUB_EP_DESC_STATUS); + stat1 = readl(ep->epn.regs + AST_VHUB_EP_DESC_STATUS); + } while(stat != stat1); + + /* Extract RPTR */ + d_last = VHUB_EP_DMA_RPTR(stat); + + /* Grab current request if any */ + req = list_first_entry_or_null(&ep->queue, struct ast_vhub_req, queue); + + EPVDBG(ep, "ACK status=%08x is_in=%d ep->d_last=%d..%d\n", + stat, ep->epn.is_in, ep->epn.d_last, d_last); + + /* Check all completed descriptors */ + while (ep->epn.d_last != d_last) { + struct ast_vhub_desc *desc; + unsigned int d_num; + bool is_last_desc; + + /* Grab next completed descriptor */ + d_num = ep->epn.d_last; + desc = &ep->epn.descs[d_num]; + ep->epn.d_last = (d_num + 1) & (AST_VHUB_DESCS_COUNT - 1); + + /* Grab len out of descriptor */ + len = VHUB_DSC1_IN_LEN(le32_to_cpu(desc->w1)); + + EPVDBG(ep, " desc %d len=%d req=%p (act=%d)\n", + d_num, len, req, req ? req->active : 0); + + /* If no active request pending, move on */ + if (!req || !req->active) + continue; + + /* Adjust size */ + req->req.actual += len; + + /* Is that the last chunk ? */ + is_last_desc = req->last_desc == d_num; + CHECK(ep, is_last_desc == (len < ep->ep.maxpacket || + (req->req.actual >= req->req.length && + !req->req.zero)), + "Last packet discrepancy: last_desc=%d len=%d r.act=%d " + "r.len=%d r.zero=%d mp=%d\n", + is_last_desc, len, req->req.actual, req->req.length, + req->req.zero, ep->ep.maxpacket); + + if (is_last_desc) { + /* + * Because we can only have one request at a time + * in our descriptor list in this implementation, + * d_last and ep->d_last should now be equal + */ + CHECK(ep, d_last == ep->epn.d_last, + "DMA read ptr mismatch %d vs %d\n", + d_last, ep->epn.d_last); + + /* Note: done will drop and re-acquire the lock */ + ast_vhub_done(ep, req, 0); + req = list_first_entry_or_null(&ep->queue, + struct ast_vhub_req, + queue); + break; + } + } + + /* More work ? */ + if (req) + ast_vhub_epn_kick_desc(ep, req); +} + +void ast_vhub_epn_ack_irq(struct ast_vhub_ep *ep) +{ + if (ep->epn.desc_mode) + ast_vhub_epn_handle_ack_desc(ep); + else + ast_vhub_epn_handle_ack(ep); +} + +static int ast_vhub_epn_queue(struct usb_ep* u_ep, struct usb_request *u_req, + gfp_t gfp_flags) +{ + struct ast_vhub_req *req = to_ast_req(u_req); + struct ast_vhub_ep *ep = to_ast_ep(u_ep); + struct ast_vhub *vhub = ep->vhub; + unsigned long flags; + bool empty; + int rc; + + /* Paranoid checks */ + if (!u_req || !u_req->complete || !u_req->buf) { + dev_warn(&vhub->pdev->dev, "Bogus EPn request ! u_req=%p\n", u_req); + if (u_req) { + dev_warn(&vhub->pdev->dev, "complete=%p internal=%d\n", + u_req->complete, req->internal); + } + return -EINVAL; + } + + /* Endpoint enabled ? */ + if (!ep->epn.enabled || !u_ep->desc || !ep->dev || !ep->d_idx || + !ep->dev->enabled) { + EPDBG(ep, "Enqueuing request on wrong or disabled EP\n"); + return -ESHUTDOWN; + } + + /* Map request for DMA if possible. For now, the rule for DMA is + * that: + * + * * For single stage mode (no descriptors): + * + * - The buffer is aligned to a 8 bytes boundary (HW requirement) + * - For a OUT endpoint, the request size is a multiple of the EP + * packet size (otherwise the controller will DMA past the end + * of the buffer if the host is sending a too long packet). + * + * * For descriptor mode (tx only for now), always. + * + * We could relax the latter by making the decision to use the bounce + * buffer based on the size of a given *segment* of the request rather + * than the whole request. + */ + if (ep->epn.desc_mode || + ((((unsigned long)u_req->buf & 7) == 0) && + (ep->epn.is_in || !(u_req->length & (u_ep->maxpacket - 1))))) { + rc = usb_gadget_map_request_by_dev(&vhub->pdev->dev, u_req, + ep->epn.is_in); + if (rc) { + dev_warn(&vhub->pdev->dev, + "Request mapping failure %d\n", rc); + return rc; + } + } else + u_req->dma = 0; + + EPVDBG(ep, "enqueue req @%p\n", req); + EPVDBG(ep, " l=%d dma=0x%x zero=%d noshort=%d noirq=%d is_in=%d\n", + u_req->length, (u32)u_req->dma, u_req->zero, + u_req->short_not_ok, u_req->no_interrupt, + ep->epn.is_in); + + /* Initialize request progress fields */ + u_req->status = -EINPROGRESS; + u_req->actual = 0; + req->act_count = 0; + req->active = false; + req->last_desc = -1; + spin_lock_irqsave(&vhub->lock, flags); + empty = list_empty(&ep->queue); + + /* Add request to list and kick processing if empty */ + list_add_tail(&req->queue, &ep->queue); + if (empty) { + if (ep->epn.desc_mode) + ast_vhub_epn_kick_desc(ep, req); + else + ast_vhub_epn_kick(ep, req); + } + spin_unlock_irqrestore(&vhub->lock, flags); + + return 0; +} + +static void ast_vhub_stop_active_req(struct ast_vhub_ep *ep, + bool restart_ep) +{ + u32 state, reg, loops; + + /* Stop DMA activity */ + if (ep->epn.desc_mode) + writel(VHUB_EP_DMA_CTRL_RESET, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + else + writel(0, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + + /* Wait for it to complete */ + for (loops = 0; loops < 1000; loops++) { + state = readl(ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + state = VHUB_EP_DMA_PROC_STATUS(state); + if (state == EP_DMA_PROC_RX_IDLE || + state == EP_DMA_PROC_TX_IDLE) + break; + udelay(1); + } + if (loops >= 1000) + dev_warn(&ep->vhub->pdev->dev, "Timeout waiting for DMA\n"); + + /* If we don't have to restart the endpoint, that's it */ + if (!restart_ep) + return; + + /* Restart the endpoint */ + if (ep->epn.desc_mode) { + /* + * Take out descriptors by resetting the DMA read + * pointer to be equal to the CPU write pointer. + * + * Note: If we ever support creating descriptors for + * requests that aren't the head of the queue, we + * may have to do something more complex here, + * especially if the request being taken out is + * not the current head descriptors. + */ + reg = VHUB_EP_DMA_SET_RPTR(ep->epn.d_next) | + VHUB_EP_DMA_SET_CPU_WPTR(ep->epn.d_next); + writel(reg, ep->epn.regs + AST_VHUB_EP_DESC_STATUS); + + /* Then turn it back on */ + writel(ep->epn.dma_conf, + ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + } else { + /* Single mode: just turn it back on */ + writel(ep->epn.dma_conf, + ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + } +} + +static int ast_vhub_epn_dequeue(struct usb_ep* u_ep, struct usb_request *u_req) +{ + struct ast_vhub_ep *ep = to_ast_ep(u_ep); + struct ast_vhub *vhub = ep->vhub; + struct ast_vhub_req *req = NULL, *iter; + unsigned long flags; + int rc = -EINVAL; + + spin_lock_irqsave(&vhub->lock, flags); + + /* Make sure it's actually queued on this endpoint */ + list_for_each_entry(iter, &ep->queue, queue) { + if (&iter->req != u_req) + continue; + req = iter; + break; + } + + if (req) { + EPVDBG(ep, "dequeue req @%p active=%d\n", + req, req->active); + if (req->active) + ast_vhub_stop_active_req(ep, true); + ast_vhub_done(ep, req, -ECONNRESET); + rc = 0; + } + + spin_unlock_irqrestore(&vhub->lock, flags); + return rc; +} + +void ast_vhub_update_epn_stall(struct ast_vhub_ep *ep) +{ + u32 reg; + + if (WARN_ON(ep->d_idx == 0)) + return; + reg = readl(ep->epn.regs + AST_VHUB_EP_CONFIG); + if (ep->epn.stalled || ep->epn.wedged) + reg |= VHUB_EP_CFG_STALL_CTRL; + else + reg &= ~VHUB_EP_CFG_STALL_CTRL; + writel(reg, ep->epn.regs + AST_VHUB_EP_CONFIG); + + if (!ep->epn.stalled && !ep->epn.wedged) + writel(VHUB_EP_TOGGLE_SET_EPNUM(ep->epn.g_idx), + ep->vhub->regs + AST_VHUB_EP_TOGGLE); +} + +static int ast_vhub_set_halt_and_wedge(struct usb_ep* u_ep, bool halt, + bool wedge) +{ + struct ast_vhub_ep *ep = to_ast_ep(u_ep); + struct ast_vhub *vhub = ep->vhub; + unsigned long flags; + + EPDBG(ep, "Set halt (%d) & wedge (%d)\n", halt, wedge); + + if (!u_ep || !u_ep->desc) + return -EINVAL; + if (ep->d_idx == 0) + return 0; + if (ep->epn.is_iso) + return -EOPNOTSUPP; + + spin_lock_irqsave(&vhub->lock, flags); + + /* Fail with still-busy IN endpoints */ + if (halt && ep->epn.is_in && !list_empty(&ep->queue)) { + spin_unlock_irqrestore(&vhub->lock, flags); + return -EAGAIN; + } + ep->epn.stalled = halt; + ep->epn.wedged = wedge; + ast_vhub_update_epn_stall(ep); + + spin_unlock_irqrestore(&vhub->lock, flags); + + return 0; +} + +static int ast_vhub_epn_set_halt(struct usb_ep *u_ep, int value) +{ + return ast_vhub_set_halt_and_wedge(u_ep, value != 0, false); +} + +static int ast_vhub_epn_set_wedge(struct usb_ep *u_ep) +{ + return ast_vhub_set_halt_and_wedge(u_ep, true, true); +} + +static int ast_vhub_epn_disable(struct usb_ep* u_ep) +{ + struct ast_vhub_ep *ep = to_ast_ep(u_ep); + struct ast_vhub *vhub = ep->vhub; + unsigned long flags; + u32 imask, ep_ier; + + EPDBG(ep, "Disabling !\n"); + + spin_lock_irqsave(&vhub->lock, flags); + + ep->epn.enabled = false; + + /* Stop active DMA if any */ + ast_vhub_stop_active_req(ep, false); + + /* Disable endpoint */ + writel(0, ep->epn.regs + AST_VHUB_EP_CONFIG); + + /* Disable ACK interrupt */ + imask = VHUB_EP_IRQ(ep->epn.g_idx); + ep_ier = readl(vhub->regs + AST_VHUB_EP_ACK_IER); + ep_ier &= ~imask; + writel(ep_ier, vhub->regs + AST_VHUB_EP_ACK_IER); + writel(imask, vhub->regs + AST_VHUB_EP_ACK_ISR); + + /* Nuke all pending requests */ + ast_vhub_nuke(ep, -ESHUTDOWN); + + /* No more descriptor associated with request */ + ep->ep.desc = NULL; + + spin_unlock_irqrestore(&vhub->lock, flags); + + return 0; +} + +static int ast_vhub_epn_enable(struct usb_ep* u_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct ast_vhub_ep *ep = to_ast_ep(u_ep); + struct ast_vhub_dev *dev; + struct ast_vhub *vhub; + u16 maxpacket, type; + unsigned long flags; + u32 ep_conf, ep_ier, imask; + + /* Check arguments */ + if (!u_ep || !desc) + return -EINVAL; + + maxpacket = usb_endpoint_maxp(desc); + if (!ep->d_idx || !ep->dev || + desc->bDescriptorType != USB_DT_ENDPOINT || + maxpacket == 0 || maxpacket > ep->ep.maxpacket) { + EPDBG(ep, "Invalid EP enable,d_idx=%d,dev=%p,type=%d,mp=%d/%d\n", + ep->d_idx, ep->dev, desc->bDescriptorType, + maxpacket, ep->ep.maxpacket); + return -EINVAL; + } + if (ep->d_idx != usb_endpoint_num(desc)) { + EPDBG(ep, "EP number mismatch !\n"); + return -EINVAL; + } + + if (ep->epn.enabled) { + EPDBG(ep, "Already enabled\n"); + return -EBUSY; + } + dev = ep->dev; + vhub = ep->vhub; + + /* Check device state */ + if (!dev->driver) { + EPDBG(ep, "Bogus device state: driver=%p speed=%d\n", + dev->driver, dev->gadget.speed); + return -ESHUTDOWN; + } + + /* Grab some info from the descriptor */ + ep->epn.is_in = usb_endpoint_dir_in(desc); + ep->ep.maxpacket = maxpacket; + type = usb_endpoint_type(desc); + ep->epn.d_next = ep->epn.d_last = 0; + ep->epn.is_iso = false; + ep->epn.stalled = false; + ep->epn.wedged = false; + + EPDBG(ep, "Enabling [%s] %s num %d maxpacket=%d\n", + ep->epn.is_in ? "in" : "out", usb_ep_type_string(type), + usb_endpoint_num(desc), maxpacket); + + /* Can we use DMA descriptor mode ? */ + ep->epn.desc_mode = ep->epn.descs && ep->epn.is_in; + if (ep->epn.desc_mode) + memset(ep->epn.descs, 0, 8 * AST_VHUB_DESCS_COUNT); + + /* + * Large send function can send up to 8 packets from + * one descriptor with a limit of 4095 bytes. + */ + ep->epn.chunk_max = ep->ep.maxpacket; + if (ep->epn.is_in) { + ep->epn.chunk_max <<= 3; + while (ep->epn.chunk_max > 4095) + ep->epn.chunk_max -= ep->ep.maxpacket; + } + + switch(type) { + case USB_ENDPOINT_XFER_CONTROL: + EPDBG(ep, "Only one control endpoint\n"); + return -EINVAL; + case USB_ENDPOINT_XFER_INT: + ep_conf = VHUB_EP_CFG_SET_TYPE(EP_TYPE_INT); + break; + case USB_ENDPOINT_XFER_BULK: + ep_conf = VHUB_EP_CFG_SET_TYPE(EP_TYPE_BULK); + break; + case USB_ENDPOINT_XFER_ISOC: + ep_conf = VHUB_EP_CFG_SET_TYPE(EP_TYPE_ISO); + ep->epn.is_iso = true; + break; + default: + return -EINVAL; + } + + /* Encode the rest of the EP config register */ + if (maxpacket < 1024) + ep_conf |= VHUB_EP_CFG_SET_MAX_PKT(maxpacket); + if (!ep->epn.is_in) + ep_conf |= VHUB_EP_CFG_DIR_OUT; + ep_conf |= VHUB_EP_CFG_SET_EP_NUM(usb_endpoint_num(desc)); + ep_conf |= VHUB_EP_CFG_ENABLE; + ep_conf |= VHUB_EP_CFG_SET_DEV(dev->index + 1); + EPVDBG(ep, "config=%08x\n", ep_conf); + + spin_lock_irqsave(&vhub->lock, flags); + + /* Disable HW and reset DMA */ + writel(0, ep->epn.regs + AST_VHUB_EP_CONFIG); + writel(VHUB_EP_DMA_CTRL_RESET, + ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + + /* Configure and enable */ + writel(ep_conf, ep->epn.regs + AST_VHUB_EP_CONFIG); + + if (ep->epn.desc_mode) { + /* Clear DMA status, including the DMA read ptr */ + writel(0, ep->epn.regs + AST_VHUB_EP_DESC_STATUS); + + /* Set descriptor base */ + writel(ep->epn.descs_dma, + ep->epn.regs + AST_VHUB_EP_DESC_BASE); + + /* Set base DMA config value */ + ep->epn.dma_conf = VHUB_EP_DMA_DESC_MODE; + if (ep->epn.is_in) + ep->epn.dma_conf |= VHUB_EP_DMA_IN_LONG_MODE; + + /* First reset and disable all operations */ + writel(ep->epn.dma_conf | VHUB_EP_DMA_CTRL_RESET, + ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + + /* Enable descriptor mode */ + writel(ep->epn.dma_conf, + ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + } else { + /* Set base DMA config value */ + ep->epn.dma_conf = VHUB_EP_DMA_SINGLE_STAGE; + + /* Reset and switch to single stage mode */ + writel(ep->epn.dma_conf | VHUB_EP_DMA_CTRL_RESET, + ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + writel(ep->epn.dma_conf, + ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + writel(0, ep->epn.regs + AST_VHUB_EP_DESC_STATUS); + } + + /* Cleanup data toggle just in case */ + writel(VHUB_EP_TOGGLE_SET_EPNUM(ep->epn.g_idx), + vhub->regs + AST_VHUB_EP_TOGGLE); + + /* Cleanup and enable ACK interrupt */ + imask = VHUB_EP_IRQ(ep->epn.g_idx); + writel(imask, vhub->regs + AST_VHUB_EP_ACK_ISR); + ep_ier = readl(vhub->regs + AST_VHUB_EP_ACK_IER); + ep_ier |= imask; + writel(ep_ier, vhub->regs + AST_VHUB_EP_ACK_IER); + + /* Woot, we are online ! */ + ep->epn.enabled = true; + + spin_unlock_irqrestore(&vhub->lock, flags); + + return 0; +} + +static void ast_vhub_epn_dispose(struct usb_ep *u_ep) +{ + struct ast_vhub_ep *ep = to_ast_ep(u_ep); + + if (WARN_ON(!ep->dev || !ep->d_idx)) + return; + + EPDBG(ep, "Releasing endpoint\n"); + + /* Take it out of the EP list */ + list_del_init(&ep->ep.ep_list); + + /* Mark the address free in the device */ + ep->dev->epns[ep->d_idx - 1] = NULL; + + /* Free name & DMA buffers */ + kfree(ep->ep.name); + ep->ep.name = NULL; + dma_free_coherent(&ep->vhub->pdev->dev, + AST_VHUB_EPn_MAX_PACKET + + 8 * AST_VHUB_DESCS_COUNT, + ep->buf, ep->buf_dma); + ep->buf = NULL; + ep->epn.descs = NULL; + + /* Mark free */ + ep->dev = NULL; +} + +static const struct usb_ep_ops ast_vhub_epn_ops = { + .enable = ast_vhub_epn_enable, + .disable = ast_vhub_epn_disable, + .dispose = ast_vhub_epn_dispose, + .queue = ast_vhub_epn_queue, + .dequeue = ast_vhub_epn_dequeue, + .set_halt = ast_vhub_epn_set_halt, + .set_wedge = ast_vhub_epn_set_wedge, + .alloc_request = ast_vhub_alloc_request, + .free_request = ast_vhub_free_request, +}; + +struct ast_vhub_ep *ast_vhub_alloc_epn(struct ast_vhub_dev *d, u8 addr) +{ + struct ast_vhub *vhub = d->vhub; + struct ast_vhub_ep *ep; + unsigned long flags; + int i; + + /* Find a free one (no device) */ + spin_lock_irqsave(&vhub->lock, flags); + for (i = 0; i < vhub->max_epns; i++) + if (vhub->epns[i].dev == NULL) + break; + if (i >= vhub->max_epns) { + spin_unlock_irqrestore(&vhub->lock, flags); + return NULL; + } + + /* Set it up */ + ep = &vhub->epns[i]; + ep->dev = d; + spin_unlock_irqrestore(&vhub->lock, flags); + + DDBG(d, "Allocating gen EP %d for addr %d\n", i, addr); + INIT_LIST_HEAD(&ep->queue); + ep->d_idx = addr; + ep->vhub = vhub; + ep->ep.ops = &ast_vhub_epn_ops; + ep->ep.name = kasprintf(GFP_KERNEL, "ep%d", addr); + d->epns[addr-1] = ep; + ep->epn.g_idx = i; + ep->epn.regs = vhub->regs + 0x200 + (i * 0x10); + + ep->buf = dma_alloc_coherent(&vhub->pdev->dev, + AST_VHUB_EPn_MAX_PACKET + + 8 * AST_VHUB_DESCS_COUNT, + &ep->buf_dma, GFP_KERNEL); + if (!ep->buf) { + kfree(ep->ep.name); + ep->ep.name = NULL; + return NULL; + } + ep->epn.descs = ep->buf + AST_VHUB_EPn_MAX_PACKET; + ep->epn.descs_dma = ep->buf_dma + AST_VHUB_EPn_MAX_PACKET; + + usb_ep_set_maxpacket_limit(&ep->ep, AST_VHUB_EPn_MAX_PACKET); + list_add_tail(&ep->ep.ep_list, &d->gadget.ep_list); + ep->ep.caps.type_iso = true; + ep->ep.caps.type_bulk = true; + ep->ep.caps.type_int = true; + ep->ep.caps.dir_in = true; + ep->ep.caps.dir_out = true; + + return ep; +} diff --git a/drivers/usb/gadget/udc/aspeed-vhub/hub.c b/drivers/usb/gadget/udc/aspeed-vhub/hub.c new file mode 100644 index 000000000..e2207d014 --- /dev/null +++ b/drivers/usb/gadget/udc/aspeed-vhub/hub.c @@ -0,0 +1,1082 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget + * + * hub.c - virtual hub handling + * + * Copyright 2017 IBM Corporation + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/prefetch.h> +#include <linux/clk.h> +#include <linux/usb/gadget.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/dma-mapping.h> +#include <linux/bcd.h> +#include <linux/version.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> + +#include "vhub.h" + +/* usb 2.0 hub device descriptor + * + * A few things we may want to improve here: + * + * - We may need to indicate TT support + * - We may need a device qualifier descriptor + * as devices can pretend to be usb1 or 2 + * - Make vid/did overridable + * - make it look like usb1 if usb1 mode forced + */ +#define KERNEL_REL bin2bcd(LINUX_VERSION_MAJOR) +#define KERNEL_VER bin2bcd(LINUX_VERSION_PATCHLEVEL) + +enum { + AST_VHUB_STR_INDEX_MAX = 4, + AST_VHUB_STR_MANUF = 3, + AST_VHUB_STR_PRODUCT = 2, + AST_VHUB_STR_SERIAL = 1, +}; + +static const struct usb_device_descriptor ast_vhub_dev_desc = { + .bLength = USB_DT_DEVICE_SIZE, + .bDescriptorType = USB_DT_DEVICE, + .bcdUSB = cpu_to_le16(0x0200), + .bDeviceClass = USB_CLASS_HUB, + .bDeviceSubClass = 0, + .bDeviceProtocol = 1, + .bMaxPacketSize0 = 64, + .idVendor = cpu_to_le16(0x1d6b), + .idProduct = cpu_to_le16(0x0107), + .bcdDevice = cpu_to_le16(0x0100), + .iManufacturer = AST_VHUB_STR_MANUF, + .iProduct = AST_VHUB_STR_PRODUCT, + .iSerialNumber = AST_VHUB_STR_SERIAL, + .bNumConfigurations = 1, +}; + +static const struct usb_qualifier_descriptor ast_vhub_qual_desc = { + .bLength = 0xA, + .bDescriptorType = USB_DT_DEVICE_QUALIFIER, + .bcdUSB = cpu_to_le16(0x0200), + .bDeviceClass = USB_CLASS_HUB, + .bDeviceSubClass = 0, + .bDeviceProtocol = 0, + .bMaxPacketSize0 = 64, + .bNumConfigurations = 1, + .bRESERVED = 0, +}; + +/* + * Configuration descriptor: same comments as above + * regarding handling USB1 mode. + */ + +/* + * We don't use sizeof() as Linux definition of + * struct usb_endpoint_descriptor contains 2 + * extra bytes + */ +#define AST_VHUB_CONF_DESC_SIZE (USB_DT_CONFIG_SIZE + \ + USB_DT_INTERFACE_SIZE + \ + USB_DT_ENDPOINT_SIZE) + +static const struct ast_vhub_full_cdesc ast_vhub_conf_desc = { + .cfg = { + .bLength = USB_DT_CONFIG_SIZE, + .bDescriptorType = USB_DT_CONFIG, + .wTotalLength = cpu_to_le16(AST_VHUB_CONF_DESC_SIZE), + .bNumInterfaces = 1, + .bConfigurationValue = 1, + .iConfiguration = 0, + .bmAttributes = USB_CONFIG_ATT_ONE | + USB_CONFIG_ATT_SELFPOWER | + USB_CONFIG_ATT_WAKEUP, + .bMaxPower = 0, + }, + .intf = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = 0, + .bAlternateSetting = 0, + .bNumEndpoints = 1, + .bInterfaceClass = USB_CLASS_HUB, + .bInterfaceSubClass = 0, + .bInterfaceProtocol = 0, + .iInterface = 0, + }, + .ep = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 0x81, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = cpu_to_le16(1), + .bInterval = 0x0c, + }, +}; + +#define AST_VHUB_HUB_DESC_SIZE (USB_DT_HUB_NONVAR_SIZE + 2) + +static const struct usb_hub_descriptor ast_vhub_hub_desc = { + .bDescLength = AST_VHUB_HUB_DESC_SIZE, + .bDescriptorType = USB_DT_HUB, + .bNbrPorts = AST_VHUB_NUM_PORTS, + .wHubCharacteristics = cpu_to_le16(HUB_CHAR_NO_LPSM), + .bPwrOn2PwrGood = 10, + .bHubContrCurrent = 0, + .u.hs.DeviceRemovable[0] = 0, + .u.hs.DeviceRemovable[1] = 0xff, +}; + +/* + * These strings converted to UTF-16 must be smaller than + * our EP0 buffer. + */ +static const struct usb_string ast_vhub_str_array[] = { + { + .id = AST_VHUB_STR_SERIAL, + .s = "00000000" + }, + { + .id = AST_VHUB_STR_PRODUCT, + .s = "USB Virtual Hub" + }, + { + .id = AST_VHUB_STR_MANUF, + .s = "Aspeed" + }, + { } +}; + +static const struct usb_gadget_strings ast_vhub_strings = { + .language = 0x0409, + .strings = (struct usb_string *)ast_vhub_str_array +}; + +static int ast_vhub_hub_dev_status(struct ast_vhub_ep *ep, + u16 wIndex, u16 wValue) +{ + u8 st0; + + EPDBG(ep, "GET_STATUS(dev)\n"); + + /* + * Mark it as self-powered, I doubt the BMC is powered off + * the USB bus ... + */ + st0 = 1 << USB_DEVICE_SELF_POWERED; + + /* + * Need to double check how remote wakeup actually works + * on that chip and what triggers it. + */ + if (ep->vhub->wakeup_en) + st0 |= 1 << USB_DEVICE_REMOTE_WAKEUP; + + return ast_vhub_simple_reply(ep, st0, 0); +} + +static int ast_vhub_hub_ep_status(struct ast_vhub_ep *ep, + u16 wIndex, u16 wValue) +{ + int ep_num; + u8 st0 = 0; + + ep_num = wIndex & USB_ENDPOINT_NUMBER_MASK; + EPDBG(ep, "GET_STATUS(ep%d)\n", ep_num); + + /* On the hub we have only EP 0 and 1 */ + if (ep_num == 1) { + if (ep->vhub->ep1_stalled) + st0 |= 1 << USB_ENDPOINT_HALT; + } else if (ep_num != 0) + return std_req_stall; + + return ast_vhub_simple_reply(ep, st0, 0); +} + +static int ast_vhub_hub_dev_feature(struct ast_vhub_ep *ep, + u16 wIndex, u16 wValue, + bool is_set) +{ + u32 val; + + EPDBG(ep, "%s_FEATURE(dev val=%02x)\n", + is_set ? "SET" : "CLEAR", wValue); + + if (wValue == USB_DEVICE_REMOTE_WAKEUP) { + ep->vhub->wakeup_en = is_set; + EPDBG(ep, "Hub remote wakeup %s\n", + is_set ? "enabled" : "disabled"); + return std_req_complete; + } + + if (wValue == USB_DEVICE_TEST_MODE) { + val = readl(ep->vhub->regs + AST_VHUB_CTRL); + val &= ~GENMASK(10, 8); + val |= VHUB_CTRL_SET_TEST_MODE((wIndex >> 8) & 0x7); + writel(val, ep->vhub->regs + AST_VHUB_CTRL); + + return std_req_complete; + } + + return std_req_stall; +} + +static int ast_vhub_hub_ep_feature(struct ast_vhub_ep *ep, + u16 wIndex, u16 wValue, + bool is_set) +{ + int ep_num; + u32 reg; + + ep_num = wIndex & USB_ENDPOINT_NUMBER_MASK; + EPDBG(ep, "%s_FEATURE(ep%d val=%02x)\n", + is_set ? "SET" : "CLEAR", ep_num, wValue); + + if (ep_num > 1) + return std_req_stall; + if (wValue != USB_ENDPOINT_HALT) + return std_req_stall; + if (ep_num == 0) + return std_req_complete; + + EPDBG(ep, "%s stall on EP 1\n", + is_set ? "setting" : "clearing"); + + ep->vhub->ep1_stalled = is_set; + reg = readl(ep->vhub->regs + AST_VHUB_EP1_CTRL); + if (is_set) { + reg |= VHUB_EP1_CTRL_STALL; + } else { + reg &= ~VHUB_EP1_CTRL_STALL; + reg |= VHUB_EP1_CTRL_RESET_TOGGLE; + } + writel(reg, ep->vhub->regs + AST_VHUB_EP1_CTRL); + + return std_req_complete; +} + +static int ast_vhub_rep_desc(struct ast_vhub_ep *ep, + u8 desc_type, u16 len) +{ + size_t dsize; + struct ast_vhub *vhub = ep->vhub; + + EPDBG(ep, "GET_DESCRIPTOR(type:%d)\n", desc_type); + + /* + * Copy first to EP buffer and send from there, so + * we can do some in-place patching if needed. We know + * the EP buffer is big enough but ensure that doesn't + * change. We do that now rather than later after we + * have checked sizes etc... to avoid a gcc bug where + * it thinks len is constant and barfs about read + * overflows in memcpy. + */ + switch(desc_type) { + case USB_DT_DEVICE: + dsize = USB_DT_DEVICE_SIZE; + memcpy(ep->buf, &vhub->vhub_dev_desc, dsize); + BUILD_BUG_ON(dsize > sizeof(vhub->vhub_dev_desc)); + BUILD_BUG_ON(USB_DT_DEVICE_SIZE >= AST_VHUB_EP0_MAX_PACKET); + break; + case USB_DT_OTHER_SPEED_CONFIG: + case USB_DT_CONFIG: + dsize = AST_VHUB_CONF_DESC_SIZE; + memcpy(ep->buf, &vhub->vhub_conf_desc, dsize); + ((u8 *)ep->buf)[1] = desc_type; + BUILD_BUG_ON(dsize > sizeof(vhub->vhub_conf_desc)); + BUILD_BUG_ON(AST_VHUB_CONF_DESC_SIZE >= AST_VHUB_EP0_MAX_PACKET); + break; + case USB_DT_HUB: + dsize = AST_VHUB_HUB_DESC_SIZE; + memcpy(ep->buf, &vhub->vhub_hub_desc, dsize); + BUILD_BUG_ON(dsize > sizeof(vhub->vhub_hub_desc)); + BUILD_BUG_ON(AST_VHUB_HUB_DESC_SIZE >= AST_VHUB_EP0_MAX_PACKET); + break; + case USB_DT_DEVICE_QUALIFIER: + dsize = sizeof(vhub->vhub_qual_desc); + memcpy(ep->buf, &vhub->vhub_qual_desc, dsize); + break; + default: + return std_req_stall; + } + + /* Crop requested length */ + if (len > dsize) + len = dsize; + + /* Shoot it from the EP buffer */ + return ast_vhub_reply(ep, NULL, len); +} + +static struct usb_gadget_strings* +ast_vhub_str_of_container(struct usb_gadget_string_container *container) +{ + return (struct usb_gadget_strings *)container->stash; +} + +static int ast_vhub_collect_languages(struct ast_vhub *vhub, void *buf, + size_t size) +{ + int rc, hdr_len, nlangs, max_langs; + struct usb_gadget_strings *lang_str; + struct usb_gadget_string_container *container; + struct usb_string_descriptor *sdesc = buf; + + nlangs = 0; + hdr_len = sizeof(struct usb_descriptor_header); + max_langs = (size - hdr_len) / sizeof(sdesc->wData[0]); + list_for_each_entry(container, &vhub->vhub_str_desc, list) { + if (nlangs >= max_langs) + break; + + lang_str = ast_vhub_str_of_container(container); + sdesc->wData[nlangs++] = cpu_to_le16(lang_str->language); + } + + rc = hdr_len + nlangs * sizeof(sdesc->wData[0]); + sdesc->bLength = rc; + sdesc->bDescriptorType = USB_DT_STRING; + + return rc; +} + +static struct usb_gadget_strings *ast_vhub_lookup_string(struct ast_vhub *vhub, + u16 lang_id) +{ + struct usb_gadget_strings *lang_str; + struct usb_gadget_string_container *container; + + list_for_each_entry(container, &vhub->vhub_str_desc, list) { + lang_str = ast_vhub_str_of_container(container); + if (lang_str->language == lang_id) + return lang_str; + } + + return NULL; +} + +static int ast_vhub_rep_string(struct ast_vhub_ep *ep, + u8 string_id, u16 lang_id, + u16 len) +{ + int rc; + u8 buf[256]; + struct ast_vhub *vhub = ep->vhub; + struct usb_gadget_strings *lang_str; + + if (string_id == 0) { + rc = ast_vhub_collect_languages(vhub, buf, sizeof(buf)); + } else { + lang_str = ast_vhub_lookup_string(vhub, lang_id); + if (!lang_str) + return std_req_stall; + + rc = usb_gadget_get_string(lang_str, string_id, buf); + } + + if (rc < 0 || rc >= AST_VHUB_EP0_MAX_PACKET) + return std_req_stall; + + /* Shoot it from the EP buffer */ + memcpy(ep->buf, buf, rc); + return ast_vhub_reply(ep, NULL, min_t(u16, rc, len)); +} + +enum std_req_rc ast_vhub_std_hub_request(struct ast_vhub_ep *ep, + struct usb_ctrlrequest *crq) +{ + struct ast_vhub *vhub = ep->vhub; + u16 wValue, wIndex, wLength; + + wValue = le16_to_cpu(crq->wValue); + wIndex = le16_to_cpu(crq->wIndex); + wLength = le16_to_cpu(crq->wLength); + + /* First packet, grab speed */ + if (vhub->speed == USB_SPEED_UNKNOWN) { + u32 ustat = readl(vhub->regs + AST_VHUB_USBSTS); + if (ustat & VHUB_USBSTS_HISPEED) + vhub->speed = USB_SPEED_HIGH; + else + vhub->speed = USB_SPEED_FULL; + UDCDBG(vhub, "USB status=%08x speed=%s\n", ustat, + vhub->speed == USB_SPEED_HIGH ? "high" : "full"); + } + + switch ((crq->bRequestType << 8) | crq->bRequest) { + /* SET_ADDRESS */ + case DeviceOutRequest | USB_REQ_SET_ADDRESS: + EPDBG(ep, "SET_ADDRESS: Got address %x\n", wValue); + writel(wValue, vhub->regs + AST_VHUB_CONF); + return std_req_complete; + + /* GET_STATUS */ + case DeviceRequest | USB_REQ_GET_STATUS: + return ast_vhub_hub_dev_status(ep, wIndex, wValue); + case InterfaceRequest | USB_REQ_GET_STATUS: + return ast_vhub_simple_reply(ep, 0, 0); + case EndpointRequest | USB_REQ_GET_STATUS: + return ast_vhub_hub_ep_status(ep, wIndex, wValue); + + /* SET/CLEAR_FEATURE */ + case DeviceOutRequest | USB_REQ_SET_FEATURE: + return ast_vhub_hub_dev_feature(ep, wIndex, wValue, true); + case DeviceOutRequest | USB_REQ_CLEAR_FEATURE: + return ast_vhub_hub_dev_feature(ep, wIndex, wValue, false); + case EndpointOutRequest | USB_REQ_SET_FEATURE: + return ast_vhub_hub_ep_feature(ep, wIndex, wValue, true); + case EndpointOutRequest | USB_REQ_CLEAR_FEATURE: + return ast_vhub_hub_ep_feature(ep, wIndex, wValue, false); + + /* GET/SET_CONFIGURATION */ + case DeviceRequest | USB_REQ_GET_CONFIGURATION: + return ast_vhub_simple_reply(ep, 1); + case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: + if (wValue != 1) + return std_req_stall; + return std_req_complete; + + /* GET_DESCRIPTOR */ + case DeviceRequest | USB_REQ_GET_DESCRIPTOR: + switch (wValue >> 8) { + case USB_DT_DEVICE: + case USB_DT_CONFIG: + case USB_DT_DEVICE_QUALIFIER: + case USB_DT_OTHER_SPEED_CONFIG: + return ast_vhub_rep_desc(ep, wValue >> 8, + wLength); + case USB_DT_STRING: + return ast_vhub_rep_string(ep, wValue & 0xff, + wIndex, wLength); + } + return std_req_stall; + + /* GET/SET_INTERFACE */ + case DeviceRequest | USB_REQ_GET_INTERFACE: + return ast_vhub_simple_reply(ep, 0); + case DeviceOutRequest | USB_REQ_SET_INTERFACE: + if (wValue != 0 || wIndex != 0) + return std_req_stall; + return std_req_complete; + } + return std_req_stall; +} + +static void ast_vhub_update_hub_ep1(struct ast_vhub *vhub, + unsigned int port) +{ + /* Update HW EP1 response */ + u32 reg = readl(vhub->regs + AST_VHUB_EP1_STS_CHG); + u32 pmask = (1 << (port + 1)); + if (vhub->ports[port].change) + reg |= pmask; + else + reg &= ~pmask; + writel(reg, vhub->regs + AST_VHUB_EP1_STS_CHG); +} + +static void ast_vhub_change_port_stat(struct ast_vhub *vhub, + unsigned int port, + u16 clr_flags, + u16 set_flags, + bool set_c) +{ + struct ast_vhub_port *p = &vhub->ports[port]; + u16 prev; + + /* Update port status */ + prev = p->status; + p->status = (prev & ~clr_flags) | set_flags; + DDBG(&p->dev, "port %d status %04x -> %04x (C=%d)\n", + port + 1, prev, p->status, set_c); + + /* Update change bits if needed */ + if (set_c) { + u16 chg = p->status ^ prev; + + /* Only these are relevant for change */ + chg &= USB_PORT_STAT_C_CONNECTION | + USB_PORT_STAT_C_ENABLE | + USB_PORT_STAT_C_SUSPEND | + USB_PORT_STAT_C_OVERCURRENT | + USB_PORT_STAT_C_RESET | + USB_PORT_STAT_C_L1; + + /* + * We only set USB_PORT_STAT_C_ENABLE if we are disabling + * the port as per USB spec, otherwise MacOS gets upset + */ + if (p->status & USB_PORT_STAT_ENABLE) + chg &= ~USB_PORT_STAT_C_ENABLE; + + p->change = chg; + ast_vhub_update_hub_ep1(vhub, port); + } +} + +static void ast_vhub_send_host_wakeup(struct ast_vhub *vhub) +{ + u32 reg = readl(vhub->regs + AST_VHUB_CTRL); + UDCDBG(vhub, "Waking up host !\n"); + reg |= VHUB_CTRL_MANUAL_REMOTE_WAKEUP; + writel(reg, vhub->regs + AST_VHUB_CTRL); +} + +void ast_vhub_device_connect(struct ast_vhub *vhub, + unsigned int port, bool on) +{ + if (on) + ast_vhub_change_port_stat(vhub, port, 0, + USB_PORT_STAT_CONNECTION, true); + else + ast_vhub_change_port_stat(vhub, port, + USB_PORT_STAT_CONNECTION | + USB_PORT_STAT_ENABLE, + 0, true); + + /* + * If the hub is set to wakup the host on connection events + * then send a wakeup. + */ + if (vhub->wakeup_en) + ast_vhub_send_host_wakeup(vhub); +} + +static void ast_vhub_wake_work(struct work_struct *work) +{ + struct ast_vhub *vhub = container_of(work, + struct ast_vhub, + wake_work); + unsigned long flags; + unsigned int i; + + /* + * Wake all sleeping ports. If a port is suspended by + * the host suspend (without explicit state suspend), + * we let the normal host wake path deal with it later. + */ + spin_lock_irqsave(&vhub->lock, flags); + for (i = 0; i < vhub->max_ports; i++) { + struct ast_vhub_port *p = &vhub->ports[i]; + + if (!(p->status & USB_PORT_STAT_SUSPEND)) + continue; + ast_vhub_change_port_stat(vhub, i, + USB_PORT_STAT_SUSPEND, + 0, true); + ast_vhub_dev_resume(&p->dev); + } + ast_vhub_send_host_wakeup(vhub); + spin_unlock_irqrestore(&vhub->lock, flags); +} + +void ast_vhub_hub_wake_all(struct ast_vhub *vhub) +{ + /* + * A device is trying to wake the world, because this + * can recurse into the device, we break the call chain + * using a work queue + */ + schedule_work(&vhub->wake_work); +} + +static void ast_vhub_port_reset(struct ast_vhub *vhub, u8 port) +{ + struct ast_vhub_port *p = &vhub->ports[port]; + u16 set, clr, speed; + + /* First mark disabled */ + ast_vhub_change_port_stat(vhub, port, + USB_PORT_STAT_ENABLE | + USB_PORT_STAT_SUSPEND, + USB_PORT_STAT_RESET, + false); + + if (!p->dev.driver) + return; + + /* + * This will either "start" the port or reset the + * device if already started... + */ + ast_vhub_dev_reset(&p->dev); + + /* Grab the right speed */ + speed = p->dev.driver->max_speed; + if (speed == USB_SPEED_UNKNOWN || speed > vhub->speed) + speed = vhub->speed; + + switch (speed) { + case USB_SPEED_LOW: + set = USB_PORT_STAT_LOW_SPEED; + clr = USB_PORT_STAT_HIGH_SPEED; + break; + case USB_SPEED_FULL: + set = 0; + clr = USB_PORT_STAT_LOW_SPEED | + USB_PORT_STAT_HIGH_SPEED; + break; + case USB_SPEED_HIGH: + set = USB_PORT_STAT_HIGH_SPEED; + clr = USB_PORT_STAT_LOW_SPEED; + break; + default: + UDCDBG(vhub, "Unsupported speed %d when" + " connecting device\n", + speed); + return; + } + clr |= USB_PORT_STAT_RESET; + set |= USB_PORT_STAT_ENABLE; + + /* This should ideally be delayed ... */ + ast_vhub_change_port_stat(vhub, port, clr, set, true); +} + +static enum std_req_rc ast_vhub_set_port_feature(struct ast_vhub_ep *ep, + u8 port, u16 feat) +{ + struct ast_vhub *vhub = ep->vhub; + struct ast_vhub_port *p; + + if (port == 0 || port > vhub->max_ports) + return std_req_stall; + port--; + p = &vhub->ports[port]; + + switch(feat) { + case USB_PORT_FEAT_SUSPEND: + if (!(p->status & USB_PORT_STAT_ENABLE)) + return std_req_complete; + ast_vhub_change_port_stat(vhub, port, + 0, USB_PORT_STAT_SUSPEND, + false); + ast_vhub_dev_suspend(&p->dev); + return std_req_complete; + case USB_PORT_FEAT_RESET: + EPDBG(ep, "Port reset !\n"); + ast_vhub_port_reset(vhub, port); + return std_req_complete; + case USB_PORT_FEAT_POWER: + /* + * On Power-on, we mark the connected flag changed, + * if there's a connected device, some hosts will + * otherwise fail to detect it. + */ + if (p->status & USB_PORT_STAT_CONNECTION) { + p->change |= USB_PORT_STAT_C_CONNECTION; + ast_vhub_update_hub_ep1(vhub, port); + } + return std_req_complete; + case USB_PORT_FEAT_TEST: + case USB_PORT_FEAT_INDICATOR: + /* We don't do anything with these */ + return std_req_complete; + } + return std_req_stall; +} + +static enum std_req_rc ast_vhub_clr_port_feature(struct ast_vhub_ep *ep, + u8 port, u16 feat) +{ + struct ast_vhub *vhub = ep->vhub; + struct ast_vhub_port *p; + + if (port == 0 || port > vhub->max_ports) + return std_req_stall; + port--; + p = &vhub->ports[port]; + + switch(feat) { + case USB_PORT_FEAT_ENABLE: + ast_vhub_change_port_stat(vhub, port, + USB_PORT_STAT_ENABLE | + USB_PORT_STAT_SUSPEND, 0, + false); + ast_vhub_dev_suspend(&p->dev); + return std_req_complete; + case USB_PORT_FEAT_SUSPEND: + if (!(p->status & USB_PORT_STAT_SUSPEND)) + return std_req_complete; + ast_vhub_change_port_stat(vhub, port, + USB_PORT_STAT_SUSPEND, 0, + false); + ast_vhub_dev_resume(&p->dev); + return std_req_complete; + case USB_PORT_FEAT_POWER: + /* We don't do power control */ + return std_req_complete; + case USB_PORT_FEAT_INDICATOR: + /* We don't have indicators */ + return std_req_complete; + case USB_PORT_FEAT_C_CONNECTION: + case USB_PORT_FEAT_C_ENABLE: + case USB_PORT_FEAT_C_SUSPEND: + case USB_PORT_FEAT_C_OVER_CURRENT: + case USB_PORT_FEAT_C_RESET: + /* Clear state-change feature */ + p->change &= ~(1u << (feat - 16)); + ast_vhub_update_hub_ep1(vhub, port); + return std_req_complete; + } + return std_req_stall; +} + +static enum std_req_rc ast_vhub_get_port_stat(struct ast_vhub_ep *ep, + u8 port) +{ + struct ast_vhub *vhub = ep->vhub; + u16 stat, chg; + + if (port == 0 || port > vhub->max_ports) + return std_req_stall; + port--; + + stat = vhub->ports[port].status; + chg = vhub->ports[port].change; + + /* We always have power */ + stat |= USB_PORT_STAT_POWER; + + EPDBG(ep, " port status=%04x change=%04x\n", stat, chg); + + return ast_vhub_simple_reply(ep, + stat & 0xff, + stat >> 8, + chg & 0xff, + chg >> 8); +} + +enum std_req_rc ast_vhub_class_hub_request(struct ast_vhub_ep *ep, + struct usb_ctrlrequest *crq) +{ + u16 wValue, wIndex, wLength; + + wValue = le16_to_cpu(crq->wValue); + wIndex = le16_to_cpu(crq->wIndex); + wLength = le16_to_cpu(crq->wLength); + + switch ((crq->bRequestType << 8) | crq->bRequest) { + case GetHubStatus: + EPDBG(ep, "GetHubStatus\n"); + return ast_vhub_simple_reply(ep, 0, 0, 0, 0); + case GetPortStatus: + EPDBG(ep, "GetPortStatus(%d)\n", wIndex & 0xff); + return ast_vhub_get_port_stat(ep, wIndex & 0xf); + case GetHubDescriptor: + if (wValue != (USB_DT_HUB << 8)) + return std_req_stall; + EPDBG(ep, "GetHubDescriptor(%d)\n", wIndex & 0xff); + return ast_vhub_rep_desc(ep, USB_DT_HUB, wLength); + case SetHubFeature: + case ClearHubFeature: + EPDBG(ep, "Get/SetHubFeature(%d)\n", wValue); + /* No feature, just complete the requests */ + if (wValue == C_HUB_LOCAL_POWER || + wValue == C_HUB_OVER_CURRENT) + return std_req_complete; + return std_req_stall; + case SetPortFeature: + EPDBG(ep, "SetPortFeature(%d,%d)\n", wIndex & 0xf, wValue); + return ast_vhub_set_port_feature(ep, wIndex & 0xf, wValue); + case ClearPortFeature: + EPDBG(ep, "ClearPortFeature(%d,%d)\n", wIndex & 0xf, wValue); + return ast_vhub_clr_port_feature(ep, wIndex & 0xf, wValue); + case ClearTTBuffer: + case ResetTT: + case StopTT: + return std_req_complete; + case GetTTState: + return ast_vhub_simple_reply(ep, 0, 0, 0, 0); + default: + EPDBG(ep, "Unknown class request\n"); + } + return std_req_stall; +} + +void ast_vhub_hub_suspend(struct ast_vhub *vhub) +{ + unsigned int i; + + UDCDBG(vhub, "USB bus suspend\n"); + + if (vhub->suspended) + return; + + vhub->suspended = true; + + /* + * Forward to unsuspended ports without changing + * their connection status. + */ + for (i = 0; i < vhub->max_ports; i++) { + struct ast_vhub_port *p = &vhub->ports[i]; + + if (!(p->status & USB_PORT_STAT_SUSPEND)) + ast_vhub_dev_suspend(&p->dev); + } +} + +void ast_vhub_hub_resume(struct ast_vhub *vhub) +{ + unsigned int i; + + UDCDBG(vhub, "USB bus resume\n"); + + if (!vhub->suspended) + return; + + vhub->suspended = false; + + /* + * Forward to unsuspended ports without changing + * their connection status. + */ + for (i = 0; i < vhub->max_ports; i++) { + struct ast_vhub_port *p = &vhub->ports[i]; + + if (!(p->status & USB_PORT_STAT_SUSPEND)) + ast_vhub_dev_resume(&p->dev); + } +} + +void ast_vhub_hub_reset(struct ast_vhub *vhub) +{ + unsigned int i; + + UDCDBG(vhub, "USB bus reset\n"); + + /* + * Is the speed known ? If not we don't care, we aren't + * initialized yet and ports haven't been enabled. + */ + if (vhub->speed == USB_SPEED_UNKNOWN) + return; + + /* We aren't suspended anymore obviously */ + vhub->suspended = false; + + /* No speed set */ + vhub->speed = USB_SPEED_UNKNOWN; + + /* Wakeup not enabled anymore */ + vhub->wakeup_en = false; + + /* + * Clear all port status, disable gadgets and "suspend" + * them. They will be woken up by a port reset. + */ + for (i = 0; i < vhub->max_ports; i++) { + struct ast_vhub_port *p = &vhub->ports[i]; + + /* Only keep the connected flag */ + p->status &= USB_PORT_STAT_CONNECTION; + p->change = 0; + + /* Suspend the gadget if any */ + ast_vhub_dev_suspend(&p->dev); + } + + /* Cleanup HW */ + writel(0, vhub->regs + AST_VHUB_CONF); + writel(0, vhub->regs + AST_VHUB_EP0_CTRL); + writel(VHUB_EP1_CTRL_RESET_TOGGLE | + VHUB_EP1_CTRL_ENABLE, + vhub->regs + AST_VHUB_EP1_CTRL); + writel(0, vhub->regs + AST_VHUB_EP1_STS_CHG); +} + +static void ast_vhub_of_parse_dev_desc(struct ast_vhub *vhub, + const struct device_node *vhub_np) +{ + u16 id; + u32 data; + + if (!of_property_read_u32(vhub_np, "vhub-vendor-id", &data)) { + id = (u16)data; + vhub->vhub_dev_desc.idVendor = cpu_to_le16(id); + } + if (!of_property_read_u32(vhub_np, "vhub-product-id", &data)) { + id = (u16)data; + vhub->vhub_dev_desc.idProduct = cpu_to_le16(id); + } + if (!of_property_read_u32(vhub_np, "vhub-device-revision", &data)) { + id = (u16)data; + vhub->vhub_dev_desc.bcdDevice = cpu_to_le16(id); + } +} + +static void ast_vhub_fixup_usb1_dev_desc(struct ast_vhub *vhub) +{ + vhub->vhub_dev_desc.bcdUSB = cpu_to_le16(0x0100); + vhub->vhub_dev_desc.bDeviceProtocol = 0; +} + +static struct usb_gadget_string_container* +ast_vhub_str_container_alloc(struct ast_vhub *vhub) +{ + unsigned int size; + struct usb_string *str_array; + struct usb_gadget_strings *lang_str; + struct usb_gadget_string_container *container; + + size = sizeof(*container); + size += sizeof(struct usb_gadget_strings); + size += sizeof(struct usb_string) * AST_VHUB_STR_INDEX_MAX; + container = devm_kzalloc(&vhub->pdev->dev, size, GFP_KERNEL); + if (!container) + return ERR_PTR(-ENOMEM); + + lang_str = ast_vhub_str_of_container(container); + str_array = (struct usb_string *)(lang_str + 1); + lang_str->strings = str_array; + return container; +} + +static void ast_vhub_str_deep_copy(struct usb_gadget_strings *dest, + const struct usb_gadget_strings *src) +{ + struct usb_string *src_array = src->strings; + struct usb_string *dest_array = dest->strings; + + dest->language = src->language; + if (src_array && dest_array) { + do { + *dest_array = *src_array; + dest_array++; + src_array++; + } while (src_array->s); + } +} + +static int ast_vhub_str_alloc_add(struct ast_vhub *vhub, + const struct usb_gadget_strings *src_str) +{ + struct usb_gadget_strings *dest_str; + struct usb_gadget_string_container *container; + + container = ast_vhub_str_container_alloc(vhub); + if (IS_ERR(container)) + return PTR_ERR(container); + + dest_str = ast_vhub_str_of_container(container); + ast_vhub_str_deep_copy(dest_str, src_str); + list_add_tail(&container->list, &vhub->vhub_str_desc); + + return 0; +} + +static const struct { + const char *name; + u8 id; +} str_id_map[] = { + {"manufacturer", AST_VHUB_STR_MANUF}, + {"product", AST_VHUB_STR_PRODUCT}, + {"serial-number", AST_VHUB_STR_SERIAL}, + {}, +}; + +static int ast_vhub_of_parse_str_desc(struct ast_vhub *vhub, + const struct device_node *desc_np) +{ + u32 langid; + int ret = 0; + int i, offset; + const char *str; + struct device_node *child; + struct usb_string str_array[AST_VHUB_STR_INDEX_MAX]; + struct usb_gadget_strings lang_str = { + .strings = (struct usb_string *)str_array, + }; + + for_each_child_of_node(desc_np, child) { + if (of_property_read_u32(child, "reg", &langid)) + continue; /* no language identifier specified */ + + if (!usb_validate_langid(langid)) + continue; /* invalid language identifier */ + + lang_str.language = langid; + for (i = offset = 0; str_id_map[i].name; i++) { + str = of_get_property(child, str_id_map[i].name, NULL); + if (str) { + str_array[offset].s = str; + str_array[offset].id = str_id_map[i].id; + offset++; + } + } + str_array[offset].id = 0; + str_array[offset].s = NULL; + + ret = ast_vhub_str_alloc_add(vhub, &lang_str); + if (ret) { + of_node_put(child); + break; + } + } + + return ret; +} + +static int ast_vhub_init_desc(struct ast_vhub *vhub) +{ + int ret; + struct device_node *desc_np; + const struct device_node *vhub_np = vhub->pdev->dev.of_node; + + /* Initialize vhub Device Descriptor. */ + memcpy(&vhub->vhub_dev_desc, &ast_vhub_dev_desc, + sizeof(vhub->vhub_dev_desc)); + ast_vhub_of_parse_dev_desc(vhub, vhub_np); + if (vhub->force_usb1) + ast_vhub_fixup_usb1_dev_desc(vhub); + + /* Initialize vhub Configuration Descriptor. */ + memcpy(&vhub->vhub_conf_desc, &ast_vhub_conf_desc, + sizeof(vhub->vhub_conf_desc)); + + /* Initialize vhub Hub Descriptor. */ + memcpy(&vhub->vhub_hub_desc, &ast_vhub_hub_desc, + sizeof(vhub->vhub_hub_desc)); + vhub->vhub_hub_desc.bNbrPorts = vhub->max_ports; + + /* Initialize vhub String Descriptors. */ + INIT_LIST_HEAD(&vhub->vhub_str_desc); + desc_np = of_get_child_by_name(vhub_np, "vhub-strings"); + if (desc_np) { + ret = ast_vhub_of_parse_str_desc(vhub, desc_np); + of_node_put(desc_np); + } + else + ret = ast_vhub_str_alloc_add(vhub, &ast_vhub_strings); + + /* Initialize vhub Qualifier Descriptor. */ + memcpy(&vhub->vhub_qual_desc, &ast_vhub_qual_desc, + sizeof(vhub->vhub_qual_desc)); + + return ret; +} + +int ast_vhub_init_hub(struct ast_vhub *vhub) +{ + vhub->speed = USB_SPEED_UNKNOWN; + INIT_WORK(&vhub->wake_work, ast_vhub_wake_work); + + return ast_vhub_init_desc(vhub); +} diff --git a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h new file mode 100644 index 000000000..6b9dfa6e1 --- /dev/null +++ b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h @@ -0,0 +1,565 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +#ifndef __ASPEED_VHUB_H +#define __ASPEED_VHUB_H + +#include <linux/usb.h> +#include <linux/usb/ch11.h> + +/***************************** + * * + * VHUB register definitions * + * * + *****************************/ + +#define AST_VHUB_CTRL 0x00 /* Root Function Control & Status Register */ +#define AST_VHUB_CONF 0x04 /* Root Configuration Setting Register */ +#define AST_VHUB_IER 0x08 /* Interrupt Ctrl Register */ +#define AST_VHUB_ISR 0x0C /* Interrupt Status Register */ +#define AST_VHUB_EP_ACK_IER 0x10 /* Programmable Endpoint Pool ACK Interrupt Enable Register */ +#define AST_VHUB_EP_NACK_IER 0x14 /* Programmable Endpoint Pool NACK Interrupt Enable Register */ +#define AST_VHUB_EP_ACK_ISR 0x18 /* Programmable Endpoint Pool ACK Interrupt Status Register */ +#define AST_VHUB_EP_NACK_ISR 0x1C /* Programmable Endpoint Pool NACK Interrupt Status Register */ +#define AST_VHUB_SW_RESET 0x20 /* Device Controller Soft Reset Enable Register */ +#define AST_VHUB_USBSTS 0x24 /* USB Status Register */ +#define AST_VHUB_EP_TOGGLE 0x28 /* Programmable Endpoint Pool Data Toggle Value Set */ +#define AST_VHUB_ISO_FAIL_ACC 0x2C /* Isochronous Transaction Fail Accumulator */ +#define AST_VHUB_EP0_CTRL 0x30 /* Endpoint 0 Contrl/Status Register */ +#define AST_VHUB_EP0_DATA 0x34 /* Base Address of Endpoint 0 In/OUT Data Buffer Register */ +#define AST_VHUB_EP1_CTRL 0x38 /* Endpoint 1 Contrl/Status Register */ +#define AST_VHUB_EP1_STS_CHG 0x3C /* Endpoint 1 Status Change Bitmap Data */ +#define AST_VHUB_SETUP0 0x80 /* Root Device Setup Data Buffer0 */ +#define AST_VHUB_SETUP1 0x84 /* Root Device Setup Data Buffer1 */ + +/* Main control reg */ +#define VHUB_CTRL_PHY_CLK (1 << 31) +#define VHUB_CTRL_PHY_LOOP_TEST (1 << 25) +#define VHUB_CTRL_DN_PWN (1 << 24) +#define VHUB_CTRL_DP_PWN (1 << 23) +#define VHUB_CTRL_LONG_DESC (1 << 18) +#define VHUB_CTRL_ISO_RSP_CTRL (1 << 17) +#define VHUB_CTRL_SPLIT_IN (1 << 16) +#define VHUB_CTRL_LOOP_T_RESULT (1 << 15) +#define VHUB_CTRL_LOOP_T_STS (1 << 14) +#define VHUB_CTRL_PHY_BIST_RESULT (1 << 13) +#define VHUB_CTRL_PHY_BIST_CTRL (1 << 12) +#define VHUB_CTRL_PHY_RESET_DIS (1 << 11) +#define VHUB_CTRL_SET_TEST_MODE(x) ((x) << 8) +#define VHUB_CTRL_MANUAL_REMOTE_WAKEUP (1 << 4) +#define VHUB_CTRL_AUTO_REMOTE_WAKEUP (1 << 3) +#define VHUB_CTRL_CLK_STOP_SUSPEND (1 << 2) +#define VHUB_CTRL_FULL_SPEED_ONLY (1 << 1) +#define VHUB_CTRL_UPSTREAM_CONNECT (1 << 0) + +/* IER & ISR */ +#define VHUB_IRQ_DEV1_BIT 9 +#define VHUB_IRQ_USB_CMD_DEADLOCK (1 << 18) +#define VHUB_IRQ_EP_POOL_NAK (1 << 17) +#define VHUB_IRQ_EP_POOL_ACK_STALL (1 << 16) +#define VHUB_IRQ_DEVICE1 (1 << (VHUB_IRQ_DEV1_BIT)) +#define VHUB_IRQ_BUS_RESUME (1 << 8) +#define VHUB_IRQ_BUS_SUSPEND (1 << 7) +#define VHUB_IRQ_BUS_RESET (1 << 6) +#define VHUB_IRQ_HUB_EP1_IN_DATA_ACK (1 << 5) +#define VHUB_IRQ_HUB_EP0_IN_DATA_NAK (1 << 4) +#define VHUB_IRQ_HUB_EP0_IN_ACK_STALL (1 << 3) +#define VHUB_IRQ_HUB_EP0_OUT_NAK (1 << 2) +#define VHUB_IRQ_HUB_EP0_OUT_ACK_STALL (1 << 1) +#define VHUB_IRQ_HUB_EP0_SETUP (1 << 0) +#define VHUB_IRQ_ACK_ALL 0x1ff + +/* Downstream device IRQ mask. */ +#define VHUB_DEV_IRQ(n) (VHUB_IRQ_DEVICE1 << (n)) + +/* SW reset reg */ +#define VHUB_SW_RESET_EP_POOL (1 << 9) +#define VHUB_SW_RESET_DMA_CONTROLLER (1 << 8) +#define VHUB_SW_RESET_DEVICE5 (1 << 5) +#define VHUB_SW_RESET_DEVICE4 (1 << 4) +#define VHUB_SW_RESET_DEVICE3 (1 << 3) +#define VHUB_SW_RESET_DEVICE2 (1 << 2) +#define VHUB_SW_RESET_DEVICE1 (1 << 1) +#define VHUB_SW_RESET_ROOT_HUB (1 << 0) + +/* EP ACK/NACK IRQ masks */ +#define VHUB_EP_IRQ(n) (1 << (n)) + +/* USB status reg */ +#define VHUB_USBSTS_HISPEED (1 << 27) + +/* EP toggle */ +#define VHUB_EP_TOGGLE_VALUE (1 << 8) +#define VHUB_EP_TOGGLE_SET_EPNUM(x) ((x) & 0x1f) + +/* HUB EP0 control */ +#define VHUB_EP0_CTRL_STALL (1 << 0) +#define VHUB_EP0_TX_BUFF_RDY (1 << 1) +#define VHUB_EP0_RX_BUFF_RDY (1 << 2) +#define VHUB_EP0_RX_LEN(x) (((x) >> 16) & 0x7f) +#define VHUB_EP0_SET_TX_LEN(x) (((x) & 0x7f) << 8) + +/* HUB EP1 control */ +#define VHUB_EP1_CTRL_RESET_TOGGLE (1 << 2) +#define VHUB_EP1_CTRL_STALL (1 << 1) +#define VHUB_EP1_CTRL_ENABLE (1 << 0) + +/*********************************** + * * + * per-device register definitions * + * * + ***********************************/ +#define AST_VHUB_DEV_EN_CTRL 0x00 +#define AST_VHUB_DEV_ISR 0x04 +#define AST_VHUB_DEV_EP0_CTRL 0x08 +#define AST_VHUB_DEV_EP0_DATA 0x0c + +/* Device enable control */ +#define VHUB_DEV_EN_SET_ADDR(x) ((x) << 8) +#define VHUB_DEV_EN_ADDR_MASK ((0xff) << 8) +#define VHUB_DEV_EN_EP0_NAK_IRQEN (1 << 6) +#define VHUB_DEV_EN_EP0_IN_ACK_IRQEN (1 << 5) +#define VHUB_DEV_EN_EP0_OUT_NAK_IRQEN (1 << 4) +#define VHUB_DEV_EN_EP0_OUT_ACK_IRQEN (1 << 3) +#define VHUB_DEV_EN_EP0_SETUP_IRQEN (1 << 2) +#define VHUB_DEV_EN_SPEED_SEL_HIGH (1 << 1) +#define VHUB_DEV_EN_ENABLE_PORT (1 << 0) + +/* Interrupt status */ +#define VHUV_DEV_IRQ_EP0_IN_DATA_NACK (1 << 4) +#define VHUV_DEV_IRQ_EP0_IN_ACK_STALL (1 << 3) +#define VHUV_DEV_IRQ_EP0_OUT_DATA_NACK (1 << 2) +#define VHUV_DEV_IRQ_EP0_OUT_ACK_STALL (1 << 1) +#define VHUV_DEV_IRQ_EP0_SETUP (1 << 0) + +/* Control bits. + * + * Note: The driver relies on the bulk of those bits + * matching corresponding vHub EP0 control bits + */ +#define VHUB_DEV_EP0_CTRL_STALL VHUB_EP0_CTRL_STALL +#define VHUB_DEV_EP0_TX_BUFF_RDY VHUB_EP0_TX_BUFF_RDY +#define VHUB_DEV_EP0_RX_BUFF_RDY VHUB_EP0_RX_BUFF_RDY +#define VHUB_DEV_EP0_RX_LEN(x) VHUB_EP0_RX_LEN(x) +#define VHUB_DEV_EP0_SET_TX_LEN(x) VHUB_EP0_SET_TX_LEN(x) + +/************************************* + * * + * per-endpoint register definitions * + * * + *************************************/ + +#define AST_VHUB_EP_CONFIG 0x00 +#define AST_VHUB_EP_DMA_CTLSTAT 0x04 +#define AST_VHUB_EP_DESC_BASE 0x08 +#define AST_VHUB_EP_DESC_STATUS 0x0C + +/* EP config reg */ +#define VHUB_EP_CFG_SET_MAX_PKT(x) (((x) & 0x3ff) << 16) +#define VHUB_EP_CFG_AUTO_DATA_DISABLE (1 << 13) +#define VHUB_EP_CFG_STALL_CTRL (1 << 12) +#define VHUB_EP_CFG_SET_EP_NUM(x) (((x) & 0xf) << 8) +#define VHUB_EP_CFG_SET_TYPE(x) ((x) << 5) +#define EP_TYPE_OFF 0 +#define EP_TYPE_BULK 1 +#define EP_TYPE_INT 2 +#define EP_TYPE_ISO 3 +#define VHUB_EP_CFG_DIR_OUT (1 << 4) +#define VHUB_EP_CFG_SET_DEV(x) ((x) << 1) +#define VHUB_EP_CFG_ENABLE (1 << 0) + +/* EP DMA control */ +#define VHUB_EP_DMA_PROC_STATUS(x) (((x) >> 4) & 0xf) +#define EP_DMA_PROC_RX_IDLE 0 +#define EP_DMA_PROC_TX_IDLE 8 +#define VHUB_EP_DMA_IN_LONG_MODE (1 << 3) +#define VHUB_EP_DMA_OUT_CONTIG_MODE (1 << 3) +#define VHUB_EP_DMA_CTRL_RESET (1 << 2) +#define VHUB_EP_DMA_SINGLE_STAGE (1 << 1) +#define VHUB_EP_DMA_DESC_MODE (1 << 0) + +/* EP DMA status */ +#define VHUB_EP_DMA_SET_TX_SIZE(x) ((x) << 16) +#define VHUB_EP_DMA_TX_SIZE(x) (((x) >> 16) & 0x7ff) +#define VHUB_EP_DMA_RPTR(x) (((x) >> 8) & 0xff) +#define VHUB_EP_DMA_SET_RPTR(x) (((x) & 0xff) << 8) +#define VHUB_EP_DMA_SET_CPU_WPTR(x) (x) +#define VHUB_EP_DMA_SINGLE_KICK (1 << 0) /* WPTR = 1 for single mode */ + +/******************************* + * * + * DMA descriptors definitions * + * * + *******************************/ + +/* Desc W1 IN */ +#define VHUB_DSC1_IN_INTERRUPT (1 << 31) +#define VHUB_DSC1_IN_SPID_DATA0 (0 << 14) +#define VHUB_DSC1_IN_SPID_DATA2 (1 << 14) +#define VHUB_DSC1_IN_SPID_DATA1 (2 << 14) +#define VHUB_DSC1_IN_SPID_MDATA (3 << 14) +#define VHUB_DSC1_IN_SET_LEN(x) ((x) & 0xfff) +#define VHUB_DSC1_IN_LEN(x) ((x) & 0xfff) + +/**************************************** + * * + * Data structures and misc definitions * + * * + ****************************************/ + +/* + * AST_VHUB_NUM_GEN_EPs and AST_VHUB_NUM_PORTS are kept to avoid breaking + * existing AST2400/AST2500 platforms. AST2600 and future vhub revisions + * should define number of downstream ports and endpoints in device tree. + */ +#define AST_VHUB_NUM_GEN_EPs 15 /* Generic non-0 EPs */ +#define AST_VHUB_NUM_PORTS 5 /* vHub ports */ +#define AST_VHUB_EP0_MAX_PACKET 64 /* EP0's max packet size */ +#define AST_VHUB_EPn_MAX_PACKET 1024 /* Generic EPs max packet size */ +#define AST_VHUB_DESCS_COUNT 256 /* Use 256 descriptor mode (valid + * values are 256 and 32) + */ + +struct ast_vhub; +struct ast_vhub_dev; + +/* + * DMA descriptor (generic EPs only, currently only used + * for IN endpoints + */ +struct ast_vhub_desc { + __le32 w0; + __le32 w1; +}; + +/* A transfer request, either core-originated or internal */ +struct ast_vhub_req { + struct usb_request req; + struct list_head queue; + + /* Actual count written to descriptors (desc mode only) */ + unsigned int act_count; + + /* + * Desc number of the final packet or -1. For non-desc + * mode (or ep0), any >= 0 value means "last packet" + */ + int last_desc; + + /* Request active (pending DMAs) */ + bool active : 1; + + /* Internal request (don't call back core) */ + bool internal : 1; +}; +#define to_ast_req(__ureq) container_of(__ureq, struct ast_vhub_req, req) + +/* Current state of an EP0 */ +enum ep0_state { + ep0_state_token, + ep0_state_data, + ep0_state_status, + ep0_state_stall, +}; + +/* + * An endpoint, either generic, ep0, actual gadget EP + * or internal use vhub EP0. vhub EP1 doesn't have an + * associated structure as it's mostly HW managed. + */ +struct ast_vhub_ep { + struct usb_ep ep; + + /* Request queue */ + struct list_head queue; + + /* EP index in the device, 0 means this is an EP0 */ + unsigned int d_idx; + + /* Dev pointer or NULL for vHub EP0 */ + struct ast_vhub_dev *dev; + + /* vHub itself */ + struct ast_vhub *vhub; + + /* + * DMA buffer for EP0, fallback DMA buffer for misaligned + * OUT transfers for generic EPs + */ + void *buf; + dma_addr_t buf_dma; + + /* The rest depends on the EP type */ + union { + /* EP0 (either device or vhub) */ + struct { + /* + * EP0 registers are "similar" for + * vHub and devices but located in + * different places. + */ + void __iomem *ctlstat; + void __iomem *setup; + + /* Current state & direction */ + enum ep0_state state; + bool dir_in; + + /* Internal use request */ + struct ast_vhub_req req; + } ep0; + + /* Generic endpoint (aka EPn) */ + struct { + /* Registers */ + void __iomem *regs; + + /* Index in global pool (zero-based) */ + unsigned int g_idx; + + /* DMA Descriptors */ + struct ast_vhub_desc *descs; + dma_addr_t descs_dma; + unsigned int d_next; + unsigned int d_last; + unsigned int dma_conf; + + /* Max chunk size for IN EPs */ + unsigned int chunk_max; + + /* State flags */ + bool is_in : 1; + bool is_iso : 1; + bool stalled : 1; + bool wedged : 1; + bool enabled : 1; + bool desc_mode : 1; + } epn; + }; +}; +#define to_ast_ep(__uep) container_of(__uep, struct ast_vhub_ep, ep) + +/* A device attached to a vHub port */ +struct ast_vhub_dev { + struct ast_vhub *vhub; + void __iomem *regs; + + /* Device index (zero-based) and name string */ + unsigned int index; + const char *name; + + /* sysfs enclosure for the gadget gunk */ + struct device *port_dev; + + /* Link to gadget core */ + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + bool registered : 1; + bool wakeup_en : 1; + bool enabled : 1; + + /* Endpoint structures */ + struct ast_vhub_ep ep0; + struct ast_vhub_ep **epns; + u32 max_epns; + +}; +#define to_ast_dev(__g) container_of(__g, struct ast_vhub_dev, gadget) + +/* Per vhub port stateinfo structure */ +struct ast_vhub_port { + /* Port status & status change registers */ + u16 status; + u16 change; + + /* Associated device slot */ + struct ast_vhub_dev dev; +}; + +struct ast_vhub_full_cdesc { + struct usb_config_descriptor cfg; + struct usb_interface_descriptor intf; + struct usb_endpoint_descriptor ep; +} __packed; + +/* Global vhub structure */ +struct ast_vhub { + struct platform_device *pdev; + void __iomem *regs; + int irq; + spinlock_t lock; + struct work_struct wake_work; + struct clk *clk; + + /* EP0 DMA buffers allocated in one chunk */ + void *ep0_bufs; + dma_addr_t ep0_bufs_dma; + + /* EP0 of the vhub itself */ + struct ast_vhub_ep ep0; + + /* State of vhub ep1 */ + bool ep1_stalled : 1; + + /* Per-port info */ + struct ast_vhub_port *ports; + u32 max_ports; + u32 port_irq_mask; + + /* Generic EP data structures */ + struct ast_vhub_ep *epns; + u32 max_epns; + + /* Upstream bus is suspended ? */ + bool suspended : 1; + + /* Hub itself can signal remote wakeup */ + bool wakeup_en : 1; + + /* Force full speed only */ + bool force_usb1 : 1; + + /* Upstream bus speed captured at bus reset */ + unsigned int speed; + + /* Standard USB Descriptors of the vhub. */ + struct usb_device_descriptor vhub_dev_desc; + struct ast_vhub_full_cdesc vhub_conf_desc; + struct usb_hub_descriptor vhub_hub_desc; + struct list_head vhub_str_desc; + struct usb_qualifier_descriptor vhub_qual_desc; +}; + +/* Standard request handlers result codes */ +enum std_req_rc { + std_req_stall = -1, /* Stall requested */ + std_req_complete = 0, /* Request completed with no data */ + std_req_data = 1, /* Request completed with data */ + std_req_driver = 2, /* Pass to driver pls */ +}; + +#ifdef CONFIG_USB_GADGET_VERBOSE +#define UDCVDBG(u, fmt...) dev_dbg(&(u)->pdev->dev, fmt) + +#define EPVDBG(ep, fmt, ...) do { \ + dev_dbg(&(ep)->vhub->pdev->dev, \ + "%s:EP%d " fmt, \ + (ep)->dev ? (ep)->dev->name : "hub", \ + (ep)->d_idx, ##__VA_ARGS__); \ + } while(0) + +#define DVDBG(d, fmt, ...) do { \ + dev_dbg(&(d)->vhub->pdev->dev, \ + "%s " fmt, (d)->name, \ + ##__VA_ARGS__); \ + } while(0) + +#else +#define UDCVDBG(u, fmt...) do { } while(0) +#define EPVDBG(ep, fmt, ...) do { } while(0) +#define DVDBG(d, fmt, ...) do { } while(0) +#endif + +#ifdef CONFIG_USB_GADGET_DEBUG +#define UDCDBG(u, fmt...) dev_dbg(&(u)->pdev->dev, fmt) + +#define EPDBG(ep, fmt, ...) do { \ + dev_dbg(&(ep)->vhub->pdev->dev, \ + "%s:EP%d " fmt, \ + (ep)->dev ? (ep)->dev->name : "hub", \ + (ep)->d_idx, ##__VA_ARGS__); \ + } while(0) + +#define DDBG(d, fmt, ...) do { \ + dev_dbg(&(d)->vhub->pdev->dev, \ + "%s " fmt, (d)->name, \ + ##__VA_ARGS__); \ + } while(0) +#else +#define UDCDBG(u, fmt...) do { } while(0) +#define EPDBG(ep, fmt, ...) do { } while(0) +#define DDBG(d, fmt, ...) do { } while(0) +#endif + +static inline void vhub_dma_workaround(void *addr) +{ + /* + * This works around a confirmed HW issue with the Aspeed chip. + * + * The core uses a different bus to memory than the AHB going to + * the USB device controller. Due to the latter having a higher + * priority than the core for arbitration on that bus, it's + * possible for an MMIO to the device, followed by a DMA by the + * device from memory to all be performed and services before + * a previous store to memory gets completed. + * + * This the following scenario can happen: + * + * - Driver writes to a DMA descriptor (Mbus) + * - Driver writes to the MMIO register to start the DMA (AHB) + * - The gadget sees the second write and sends a read of the + * descriptor to the memory controller (Mbus) + * - The gadget hits memory before the descriptor write + * causing it to read an obsolete value. + * + * Thankfully the problem is limited to the USB gadget device, other + * masters in the SoC all have a lower priority than the core, thus + * ensuring that the store by the core arrives first. + * + * The workaround consists of using a dummy read of the memory before + * doing the MMIO writes. This will ensure that the previous writes + * have been "pushed out". + */ + mb(); + (void)__raw_readl((void __iomem *)addr); +} + +/* core.c */ +void ast_vhub_done(struct ast_vhub_ep *ep, struct ast_vhub_req *req, + int status); +void ast_vhub_nuke(struct ast_vhub_ep *ep, int status); +struct usb_request *ast_vhub_alloc_request(struct usb_ep *u_ep, + gfp_t gfp_flags); +void ast_vhub_free_request(struct usb_ep *u_ep, struct usb_request *u_req); +void ast_vhub_init_hw(struct ast_vhub *vhub); + +/* ep0.c */ +void ast_vhub_ep0_handle_ack(struct ast_vhub_ep *ep, bool in_ack); +void ast_vhub_ep0_handle_setup(struct ast_vhub_ep *ep); +void ast_vhub_reset_ep0(struct ast_vhub_dev *dev); +void ast_vhub_init_ep0(struct ast_vhub *vhub, struct ast_vhub_ep *ep, + struct ast_vhub_dev *dev); +int ast_vhub_reply(struct ast_vhub_ep *ep, char *ptr, int len); +int __ast_vhub_simple_reply(struct ast_vhub_ep *ep, int len, ...); +#define ast_vhub_simple_reply(udc, ...) \ + __ast_vhub_simple_reply((udc), \ + sizeof((u8[]) { __VA_ARGS__ })/sizeof(u8), \ + __VA_ARGS__) + +/* hub.c */ +int ast_vhub_init_hub(struct ast_vhub *vhub); +enum std_req_rc ast_vhub_std_hub_request(struct ast_vhub_ep *ep, + struct usb_ctrlrequest *crq); +enum std_req_rc ast_vhub_class_hub_request(struct ast_vhub_ep *ep, + struct usb_ctrlrequest *crq); +void ast_vhub_device_connect(struct ast_vhub *vhub, unsigned int port, + bool on); +void ast_vhub_hub_suspend(struct ast_vhub *vhub); +void ast_vhub_hub_resume(struct ast_vhub *vhub); +void ast_vhub_hub_reset(struct ast_vhub *vhub); +void ast_vhub_hub_wake_all(struct ast_vhub *vhub); + +/* dev.c */ +int ast_vhub_init_dev(struct ast_vhub *vhub, unsigned int idx); +void ast_vhub_del_dev(struct ast_vhub_dev *d); +void ast_vhub_dev_irq(struct ast_vhub_dev *d); +int ast_vhub_std_dev_request(struct ast_vhub_ep *ep, + struct usb_ctrlrequest *crq); + +/* epn.c */ +void ast_vhub_epn_ack_irq(struct ast_vhub_ep *ep); +void ast_vhub_update_epn_stall(struct ast_vhub_ep *ep); +struct ast_vhub_ep *ast_vhub_alloc_epn(struct ast_vhub_dev *d, u8 addr); +void ast_vhub_dev_suspend(struct ast_vhub_dev *d); +void ast_vhub_dev_resume(struct ast_vhub_dev *d); +void ast_vhub_dev_reset(struct ast_vhub_dev *d); + +#endif /* __ASPEED_VHUB_H */ diff --git a/drivers/usb/gadget/udc/aspeed_udc.c b/drivers/usb/gadget/udc/aspeed_udc.c new file mode 100644 index 000000000..01968e216 --- /dev/null +++ b/drivers/usb/gadget/udc/aspeed_udc.c @@ -0,0 +1,1597 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2021 Aspeed Technology Inc. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/prefetch.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/slab.h> + +#define AST_UDC_NUM_ENDPOINTS (1 + 4) +#define AST_UDC_EP0_MAX_PACKET 64 /* EP0's max packet size */ +#define AST_UDC_EPn_MAX_PACKET 1024 /* Generic EPs max packet size */ +#define AST_UDC_DESCS_COUNT 256 /* Use 256 stages descriptor mode (32/256) */ +#define AST_UDC_DESC_MODE 1 /* Single/Multiple Stage(s) Descriptor Mode */ + +#define AST_UDC_EP_DMA_SIZE (AST_UDC_EPn_MAX_PACKET + 8 * AST_UDC_DESCS_COUNT) + +/***************************** + * * + * UDC register definitions * + * * + *****************************/ + +#define AST_UDC_FUNC_CTRL 0x00 /* Root Function Control & Status Register */ +#define AST_UDC_CONFIG 0x04 /* Root Configuration Setting Register */ +#define AST_UDC_IER 0x08 /* Interrupt Control Register */ +#define AST_UDC_ISR 0x0C /* Interrupt Status Register */ +#define AST_UDC_EP_ACK_IER 0x10 /* Programmable ep Pool ACK Interrupt Enable Reg */ +#define AST_UDC_EP_NAK_IER 0x14 /* Programmable ep Pool NAK Interrupt Enable Reg */ +#define AST_UDC_EP_ACK_ISR 0x18 /* Programmable ep Pool ACK Interrupt Status Reg */ +#define AST_UDC_EP_NAK_ISR 0x1C /* Programmable ep Pool NAK Interrupt Status Reg */ +#define AST_UDC_DEV_RESET 0x20 /* Device Controller Soft Reset Enable Register */ +#define AST_UDC_STS 0x24 /* USB Status Register */ +#define AST_VHUB_EP_DATA 0x28 /* Programmable ep Pool Data Toggle Value Set */ +#define AST_VHUB_ISO_TX_FAIL 0x2C /* Isochronous Transaction Fail Accumulator */ +#define AST_UDC_EP0_CTRL 0x30 /* Endpoint 0 Control/Status Register */ +#define AST_UDC_EP0_DATA_BUFF 0x34 /* Base Address of ep0 IN/OUT Data Buffer Reg */ +#define AST_UDC_SETUP0 0x80 /* Root Device Setup Data Buffer0 */ +#define AST_UDC_SETUP1 0x84 /* Root Device Setup Data Buffer1 */ + + +/* Main control reg */ +#define USB_PHY_CLK_EN BIT(31) +#define USB_FIFO_DYN_PWRD_EN BIT(19) +#define USB_EP_LONG_DESC BIT(18) +#define USB_BIST_TEST_PASS BIT(13) +#define USB_BIST_TURN_ON BIT(12) +#define USB_PHY_RESET_DIS BIT(11) +#define USB_TEST_MODE(x) ((x) << 8) +#define USB_FORCE_TIMER_HS BIT(7) +#define USB_FORCE_HS BIT(6) +#define USB_REMOTE_WAKEUP_12MS BIT(5) +#define USB_REMOTE_WAKEUP_EN BIT(4) +#define USB_AUTO_REMOTE_WAKEUP_EN BIT(3) +#define USB_STOP_CLK_IN_SUPEND BIT(2) +#define USB_UPSTREAM_FS BIT(1) +#define USB_UPSTREAM_EN BIT(0) + +/* Main config reg */ +#define UDC_CFG_SET_ADDR(x) ((x) & 0x3f) +#define UDC_CFG_ADDR_MASK (0x3f) + +/* Interrupt ctrl & status reg */ +#define UDC_IRQ_EP_POOL_NAK BIT(17) +#define UDC_IRQ_EP_POOL_ACK_STALL BIT(16) +#define UDC_IRQ_BUS_RESUME BIT(8) +#define UDC_IRQ_BUS_SUSPEND BIT(7) +#define UDC_IRQ_BUS_RESET BIT(6) +#define UDC_IRQ_EP0_IN_DATA_NAK BIT(4) +#define UDC_IRQ_EP0_IN_ACK_STALL BIT(3) +#define UDC_IRQ_EP0_OUT_NAK BIT(2) +#define UDC_IRQ_EP0_OUT_ACK_STALL BIT(1) +#define UDC_IRQ_EP0_SETUP BIT(0) +#define UDC_IRQ_ACK_ALL (0x1ff) + +/* EP isr reg */ +#define USB_EP3_ISR BIT(3) +#define USB_EP2_ISR BIT(2) +#define USB_EP1_ISR BIT(1) +#define USB_EP0_ISR BIT(0) +#define UDC_IRQ_EP_ACK_ALL (0xf) + +/*Soft reset reg */ +#define ROOT_UDC_SOFT_RESET BIT(0) + +/* USB status reg */ +#define UDC_STS_HIGHSPEED BIT(27) + +/* Programmable EP data toggle */ +#define EP_TOGGLE_SET_EPNUM(x) ((x) & 0x3) + +/* EP0 ctrl reg */ +#define EP0_GET_RX_LEN(x) ((x >> 16) & 0x7f) +#define EP0_TX_LEN(x) ((x & 0x7f) << 8) +#define EP0_RX_BUFF_RDY BIT(2) +#define EP0_TX_BUFF_RDY BIT(1) +#define EP0_STALL BIT(0) + +/************************************* + * * + * per-endpoint register definitions * + * * + *************************************/ + +#define AST_UDC_EP_CONFIG 0x00 /* Endpoint Configuration Register */ +#define AST_UDC_EP_DMA_CTRL 0x04 /* DMA Descriptor List Control/Status Register */ +#define AST_UDC_EP_DMA_BUFF 0x08 /* DMA Descriptor/Buffer Base Address */ +#define AST_UDC_EP_DMA_STS 0x0C /* DMA Descriptor List R/W Pointer and Status */ + +#define AST_UDC_EP_BASE 0x200 +#define AST_UDC_EP_OFFSET 0x10 + +/* EP config reg */ +#define EP_SET_MAX_PKT(x) ((x & 0x3ff) << 16) +#define EP_DATA_FETCH_CTRL(x) ((x & 0x3) << 14) +#define EP_AUTO_DATA_DISABLE (0x1 << 13) +#define EP_SET_EP_STALL (0x1 << 12) +#define EP_SET_EP_NUM(x) ((x & 0xf) << 8) +#define EP_SET_TYPE_MASK(x) ((x) << 5) +#define EP_TYPE_BULK (0x1) +#define EP_TYPE_INT (0x2) +#define EP_TYPE_ISO (0x3) +#define EP_DIR_OUT (0x1 << 4) +#define EP_ALLOCATED_MASK (0x7 << 1) +#define EP_ENABLE BIT(0) + +/* EP DMA ctrl reg */ +#define EP_DMA_CTRL_GET_PROC_STS(x) ((x >> 4) & 0xf) +#define EP_DMA_CTRL_STS_RX_IDLE 0x0 +#define EP_DMA_CTRL_STS_TX_IDLE 0x8 +#define EP_DMA_CTRL_IN_LONG_MODE (0x1 << 3) +#define EP_DMA_CTRL_RESET (0x1 << 2) +#define EP_DMA_SINGLE_STAGE (0x1 << 1) +#define EP_DMA_DESC_MODE (0x1 << 0) + +/* EP DMA status reg */ +#define EP_DMA_SET_TX_SIZE(x) ((x & 0x7ff) << 16) +#define EP_DMA_GET_TX_SIZE(x) (((x) >> 16) & 0x7ff) +#define EP_DMA_GET_RPTR(x) (((x) >> 8) & 0xff) +#define EP_DMA_GET_WPTR(x) ((x) & 0xff) +#define EP_DMA_SINGLE_KICK (1 << 0) /* WPTR = 1 for single mode */ + +/* EP desc reg */ +#define AST_EP_DMA_DESC_INTR_ENABLE BIT(31) +#define AST_EP_DMA_DESC_PID_DATA0 (0 << 14) +#define AST_EP_DMA_DESC_PID_DATA2 BIT(14) +#define AST_EP_DMA_DESC_PID_DATA1 (2 << 14) +#define AST_EP_DMA_DESC_PID_MDATA (3 << 14) +#define EP_DESC1_IN_LEN(x) ((x) & 0x1fff) +#define AST_EP_DMA_DESC_MAX_LEN (7680) /* Max packet length for trasmit in 1 desc */ + +struct ast_udc_request { + struct usb_request req; + struct list_head queue; + unsigned mapped:1; + unsigned int actual_dma_length; + u32 saved_dma_wptr; +}; + +#define to_ast_req(__req) container_of(__req, struct ast_udc_request, req) + +struct ast_dma_desc { + u32 des_0; + u32 des_1; +}; + +struct ast_udc_ep { + struct usb_ep ep; + + /* Request queue */ + struct list_head queue; + + struct ast_udc_dev *udc; + void __iomem *ep_reg; + void *epn_buf; + dma_addr_t epn_buf_dma; + const struct usb_endpoint_descriptor *desc; + + /* DMA Descriptors */ + struct ast_dma_desc *descs; + dma_addr_t descs_dma; + u32 descs_wptr; + u32 chunk_max; + + bool dir_in:1; + unsigned stopped:1; + bool desc_mode:1; +}; + +#define to_ast_ep(__ep) container_of(__ep, struct ast_udc_ep, ep) + +struct ast_udc_dev { + struct platform_device *pdev; + void __iomem *reg; + int irq; + spinlock_t lock; + struct clk *clk; + struct work_struct wake_work; + + /* EP0 DMA buffers allocated in one chunk */ + void *ep0_buf; + dma_addr_t ep0_buf_dma; + struct ast_udc_ep ep[AST_UDC_NUM_ENDPOINTS]; + + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + void __iomem *creq; + enum usb_device_state suspended_from; + int desc_mode; + + /* Force full speed only */ + bool force_usb1:1; + unsigned is_control_tx:1; + bool wakeup_en:1; +}; + +#define to_ast_dev(__g) container_of(__g, struct ast_udc_dev, gadget) + +static const char * const ast_ep_name[] = { + "ep0", "ep1", "ep2", "ep3", "ep4" +}; + +#ifdef AST_UDC_DEBUG_ALL +#define AST_UDC_DEBUG +#define AST_SETUP_DEBUG +#define AST_EP_DEBUG +#define AST_ISR_DEBUG +#endif + +#ifdef AST_SETUP_DEBUG +#define SETUP_DBG(u, fmt, ...) \ + dev_dbg(&(u)->pdev->dev, "%s() " fmt, __func__, ##__VA_ARGS__) +#else +#define SETUP_DBG(u, fmt, ...) +#endif + +#ifdef AST_EP_DEBUG +#define EP_DBG(e, fmt, ...) \ + dev_dbg(&(e)->udc->pdev->dev, "%s():%s " fmt, __func__, \ + (e)->ep.name, ##__VA_ARGS__) +#else +#define EP_DBG(ep, fmt, ...) ((void)(ep)) +#endif + +#ifdef AST_UDC_DEBUG +#define UDC_DBG(u, fmt, ...) \ + dev_dbg(&(u)->pdev->dev, "%s() " fmt, __func__, ##__VA_ARGS__) +#else +#define UDC_DBG(u, fmt, ...) +#endif + +#ifdef AST_ISR_DEBUG +#define ISR_DBG(u, fmt, ...) \ + dev_dbg(&(u)->pdev->dev, "%s() " fmt, __func__, ##__VA_ARGS__) +#else +#define ISR_DBG(u, fmt, ...) +#endif + +/*-------------------------------------------------------------------------*/ +#define ast_udc_read(udc, offset) \ + readl((udc)->reg + (offset)) +#define ast_udc_write(udc, val, offset) \ + writel((val), (udc)->reg + (offset)) + +#define ast_ep_read(ep, reg) \ + readl((ep)->ep_reg + (reg)) +#define ast_ep_write(ep, val, reg) \ + writel((val), (ep)->ep_reg + (reg)) + +/*-------------------------------------------------------------------------*/ + +static void ast_udc_done(struct ast_udc_ep *ep, struct ast_udc_request *req, + int status) +{ + struct ast_udc_dev *udc = ep->udc; + + EP_DBG(ep, "req @%p, len (%d/%d), buf:0x%x, dir:0x%x\n", + req, req->req.actual, req->req.length, + (u32)req->req.buf, ep->dir_in); + + list_del(&req->queue); + + if (req->req.status == -EINPROGRESS) + req->req.status = status; + else + status = req->req.status; + + if (status && status != -ESHUTDOWN) + EP_DBG(ep, "done req:%p, status:%d\n", req, status); + + spin_unlock(&udc->lock); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&udc->lock); +} + +static void ast_udc_nuke(struct ast_udc_ep *ep, int status) +{ + int count = 0; + + while (!list_empty(&ep->queue)) { + struct ast_udc_request *req; + + req = list_entry(ep->queue.next, struct ast_udc_request, + queue); + ast_udc_done(ep, req, status); + count++; + } + + if (count) + EP_DBG(ep, "Nuked %d request(s)\n", count); +} + +/* + * Stop activity on all endpoints. + * Device controller for which EP activity is to be stopped. + * + * All the endpoints are stopped and any pending transfer requests if any on + * the endpoint are terminated. + */ +static void ast_udc_stop_activity(struct ast_udc_dev *udc) +{ + struct ast_udc_ep *ep; + int i; + + for (i = 0; i < AST_UDC_NUM_ENDPOINTS; i++) { + ep = &udc->ep[i]; + ep->stopped = 1; + ast_udc_nuke(ep, -ESHUTDOWN); + } +} + +static int ast_udc_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + u16 maxpacket = usb_endpoint_maxp(desc); + struct ast_udc_ep *ep = to_ast_ep(_ep); + struct ast_udc_dev *udc = ep->udc; + u8 epnum = usb_endpoint_num(desc); + unsigned long flags; + u32 ep_conf = 0; + u8 dir_in; + u8 type; + + if (!_ep || !ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT || + maxpacket == 0 || maxpacket > ep->ep.maxpacket) { + EP_DBG(ep, "Failed, invalid EP enable param\n"); + return -EINVAL; + } + + if (!udc->driver) { + EP_DBG(ep, "bogus device state\n"); + return -ESHUTDOWN; + } + + EP_DBG(ep, "maxpacket:0x%x\n", maxpacket); + + spin_lock_irqsave(&udc->lock, flags); + + ep->desc = desc; + ep->stopped = 0; + ep->ep.maxpacket = maxpacket; + ep->chunk_max = AST_EP_DMA_DESC_MAX_LEN; + + if (maxpacket < AST_UDC_EPn_MAX_PACKET) + ep_conf = EP_SET_MAX_PKT(maxpacket); + + ep_conf |= EP_SET_EP_NUM(epnum); + + type = usb_endpoint_type(desc); + dir_in = usb_endpoint_dir_in(desc); + ep->dir_in = dir_in; + if (!ep->dir_in) + ep_conf |= EP_DIR_OUT; + + EP_DBG(ep, "type %d, dir_in %d\n", type, dir_in); + switch (type) { + case USB_ENDPOINT_XFER_ISOC: + ep_conf |= EP_SET_TYPE_MASK(EP_TYPE_ISO); + break; + + case USB_ENDPOINT_XFER_BULK: + ep_conf |= EP_SET_TYPE_MASK(EP_TYPE_BULK); + break; + + case USB_ENDPOINT_XFER_INT: + ep_conf |= EP_SET_TYPE_MASK(EP_TYPE_INT); + break; + } + + ep->desc_mode = udc->desc_mode && ep->descs_dma && ep->dir_in; + if (ep->desc_mode) { + ast_ep_write(ep, EP_DMA_CTRL_RESET, AST_UDC_EP_DMA_CTRL); + ast_ep_write(ep, 0, AST_UDC_EP_DMA_STS); + ast_ep_write(ep, ep->descs_dma, AST_UDC_EP_DMA_BUFF); + + /* Enable Long Descriptor Mode */ + ast_ep_write(ep, EP_DMA_CTRL_IN_LONG_MODE | EP_DMA_DESC_MODE, + AST_UDC_EP_DMA_CTRL); + + ep->descs_wptr = 0; + + } else { + ast_ep_write(ep, EP_DMA_CTRL_RESET, AST_UDC_EP_DMA_CTRL); + ast_ep_write(ep, EP_DMA_SINGLE_STAGE, AST_UDC_EP_DMA_CTRL); + ast_ep_write(ep, 0, AST_UDC_EP_DMA_STS); + } + + /* Cleanup data toggle just in case */ + ast_udc_write(udc, EP_TOGGLE_SET_EPNUM(epnum), AST_VHUB_EP_DATA); + + /* Enable EP */ + ast_ep_write(ep, ep_conf | EP_ENABLE, AST_UDC_EP_CONFIG); + + EP_DBG(ep, "ep_config: 0x%x\n", ast_ep_read(ep, AST_UDC_EP_CONFIG)); + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static int ast_udc_ep_disable(struct usb_ep *_ep) +{ + struct ast_udc_ep *ep = to_ast_ep(_ep); + struct ast_udc_dev *udc = ep->udc; + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + + ep->ep.desc = NULL; + ep->stopped = 1; + + ast_udc_nuke(ep, -ESHUTDOWN); + ast_ep_write(ep, 0, AST_UDC_EP_CONFIG); + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static struct usb_request *ast_udc_ep_alloc_request(struct usb_ep *_ep, + gfp_t gfp_flags) +{ + struct ast_udc_ep *ep = to_ast_ep(_ep); + struct ast_udc_request *req; + + req = kzalloc(sizeof(struct ast_udc_request), gfp_flags); + if (!req) { + EP_DBG(ep, "request allocation failed\n"); + return NULL; + } + + INIT_LIST_HEAD(&req->queue); + + return &req->req; +} + +static void ast_udc_ep_free_request(struct usb_ep *_ep, + struct usb_request *_req) +{ + struct ast_udc_request *req = to_ast_req(_req); + + kfree(req); +} + +static int ast_dma_descriptor_setup(struct ast_udc_ep *ep, u32 dma_buf, + u16 tx_len, struct ast_udc_request *req) +{ + struct ast_udc_dev *udc = ep->udc; + struct device *dev = &udc->pdev->dev; + bool last = false; + int chunk, count; + u32 offset; + + if (!ep->descs) { + dev_warn(dev, "%s: Empty DMA descs list failure\n", + ep->ep.name); + return -EINVAL; + } + + chunk = tx_len; + offset = count = 0; + + EP_DBG(ep, "req @%p, %s:%d, %s:0x%x, %s:0x%x\n", req, + "wptr", ep->descs_wptr, "dma_buf", dma_buf, + "tx_len", tx_len); + + /* Create Descriptor Lists */ + while (chunk >= 0 && !last && count < AST_UDC_DESCS_COUNT) { + + ep->descs[ep->descs_wptr].des_0 = dma_buf + offset; + + if (chunk > ep->chunk_max) { + ep->descs[ep->descs_wptr].des_1 = ep->chunk_max; + } else { + ep->descs[ep->descs_wptr].des_1 = chunk; + last = true; + } + + chunk -= ep->chunk_max; + + EP_DBG(ep, "descs[%d]: 0x%x 0x%x\n", + ep->descs_wptr, + ep->descs[ep->descs_wptr].des_0, + ep->descs[ep->descs_wptr].des_1); + + if (count == 0) + req->saved_dma_wptr = ep->descs_wptr; + + ep->descs_wptr++; + count++; + + if (ep->descs_wptr >= AST_UDC_DESCS_COUNT) + ep->descs_wptr = 0; + + offset = ep->chunk_max * count; + } + + return 0; +} + +static void ast_udc_epn_kick(struct ast_udc_ep *ep, struct ast_udc_request *req) +{ + u32 tx_len; + u32 last; + + last = req->req.length - req->req.actual; + tx_len = last > ep->ep.maxpacket ? ep->ep.maxpacket : last; + + EP_DBG(ep, "kick req @%p, len:%d, dir:%d\n", + req, tx_len, ep->dir_in); + + ast_ep_write(ep, req->req.dma + req->req.actual, AST_UDC_EP_DMA_BUFF); + + /* Start DMA */ + ast_ep_write(ep, EP_DMA_SET_TX_SIZE(tx_len), AST_UDC_EP_DMA_STS); + ast_ep_write(ep, EP_DMA_SET_TX_SIZE(tx_len) | EP_DMA_SINGLE_KICK, + AST_UDC_EP_DMA_STS); +} + +static void ast_udc_epn_kick_desc(struct ast_udc_ep *ep, + struct ast_udc_request *req) +{ + u32 descs_max_size; + u32 tx_len; + u32 last; + + descs_max_size = AST_EP_DMA_DESC_MAX_LEN * AST_UDC_DESCS_COUNT; + + last = req->req.length - req->req.actual; + tx_len = last > descs_max_size ? descs_max_size : last; + + EP_DBG(ep, "kick req @%p, %s:%d, %s:0x%x, %s:0x%x (%d/%d), %s:0x%x\n", + req, "tx_len", tx_len, "dir_in", ep->dir_in, + "dma", req->req.dma + req->req.actual, + req->req.actual, req->req.length, + "descs_max_size", descs_max_size); + + if (!ast_dma_descriptor_setup(ep, req->req.dma + req->req.actual, + tx_len, req)) + req->actual_dma_length += tx_len; + + /* make sure CPU done everything before triggering DMA */ + mb(); + + ast_ep_write(ep, ep->descs_wptr, AST_UDC_EP_DMA_STS); + + EP_DBG(ep, "descs_wptr:%d, dstat:0x%x, dctrl:0x%x\n", + ep->descs_wptr, + ast_ep_read(ep, AST_UDC_EP_DMA_STS), + ast_ep_read(ep, AST_UDC_EP_DMA_CTRL)); +} + +static void ast_udc_ep0_queue(struct ast_udc_ep *ep, + struct ast_udc_request *req) +{ + struct ast_udc_dev *udc = ep->udc; + u32 tx_len; + u32 last; + + last = req->req.length - req->req.actual; + tx_len = last > ep->ep.maxpacket ? ep->ep.maxpacket : last; + + ast_udc_write(udc, req->req.dma + req->req.actual, + AST_UDC_EP0_DATA_BUFF); + + if (ep->dir_in) { + /* IN requests, send data */ + SETUP_DBG(udc, "IN: %s:0x%x, %s:0x%x, %s:%d (%d/%d), %s:%d\n", + "buf", (u32)req->req.buf, + "dma", req->req.dma + req->req.actual, + "tx_len", tx_len, + req->req.actual, req->req.length, + "dir_in", ep->dir_in); + + req->req.actual += tx_len; + ast_udc_write(udc, EP0_TX_LEN(tx_len), AST_UDC_EP0_CTRL); + ast_udc_write(udc, EP0_TX_LEN(tx_len) | EP0_TX_BUFF_RDY, + AST_UDC_EP0_CTRL); + + } else { + /* OUT requests, receive data */ + SETUP_DBG(udc, "OUT: %s:%x, %s:%x, %s:(%d/%d), %s:%d\n", + "buf", (u32)req->req.buf, + "dma", req->req.dma + req->req.actual, + "len", req->req.actual, req->req.length, + "dir_in", ep->dir_in); + + if (!req->req.length) { + /* 0 len request, send tx as completion */ + ast_udc_write(udc, EP0_TX_BUFF_RDY, AST_UDC_EP0_CTRL); + ep->dir_in = 0x1; + } else + ast_udc_write(udc, EP0_RX_BUFF_RDY, AST_UDC_EP0_CTRL); + } +} + +static int ast_udc_ep_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t gfp_flags) +{ + struct ast_udc_request *req = to_ast_req(_req); + struct ast_udc_ep *ep = to_ast_ep(_ep); + struct ast_udc_dev *udc = ep->udc; + struct device *dev = &udc->pdev->dev; + unsigned long flags; + int rc; + + if (unlikely(!_req || !_req->complete || !_req->buf || !_ep)) { + dev_warn(dev, "Invalid EP request !\n"); + return -EINVAL; + } + + if (ep->stopped) { + dev_warn(dev, "%s is already stopped !\n", _ep->name); + return -ESHUTDOWN; + } + + spin_lock_irqsave(&udc->lock, flags); + + list_add_tail(&req->queue, &ep->queue); + + req->req.actual = 0; + req->req.status = -EINPROGRESS; + req->actual_dma_length = 0; + + rc = usb_gadget_map_request(&udc->gadget, &req->req, ep->dir_in); + if (rc) { + EP_DBG(ep, "Request mapping failure %d\n", rc); + dev_warn(dev, "Request mapping failure %d\n", rc); + goto end; + } + + EP_DBG(ep, "enqueue req @%p\n", req); + EP_DBG(ep, "l=%d, dma:0x%x, zero:%d, is_in:%d\n", + _req->length, _req->dma, _req->zero, ep->dir_in); + + /* EP0 request enqueue */ + if (ep->ep.desc == NULL) { + if ((req->req.dma % 4) != 0) { + dev_warn(dev, "EP0 req dma alignment error\n"); + rc = -ESHUTDOWN; + goto end; + } + + ast_udc_ep0_queue(ep, req); + goto end; + } + + /* EPn request enqueue */ + if (list_is_singular(&ep->queue)) { + if (ep->desc_mode) + ast_udc_epn_kick_desc(ep, req); + else + ast_udc_epn_kick(ep, req); + } + +end: + spin_unlock_irqrestore(&udc->lock, flags); + + return rc; +} + +static int ast_udc_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct ast_udc_ep *ep = to_ast_ep(_ep); + struct ast_udc_dev *udc = ep->udc; + struct ast_udc_request *req; + unsigned long flags; + int rc = 0; + + spin_lock_irqsave(&udc->lock, flags); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry(req, &ep->queue, queue) { + if (&req->req == _req) { + list_del_init(&req->queue); + ast_udc_done(ep, req, -ESHUTDOWN); + _req->status = -ECONNRESET; + break; + } + } + + /* dequeue request not found */ + if (&req->req != _req) + rc = -EINVAL; + + spin_unlock_irqrestore(&udc->lock, flags); + + return rc; +} + +static int ast_udc_ep_set_halt(struct usb_ep *_ep, int value) +{ + struct ast_udc_ep *ep = to_ast_ep(_ep); + struct ast_udc_dev *udc = ep->udc; + unsigned long flags; + int epnum; + u32 ctrl; + + EP_DBG(ep, "val:%d\n", value); + + spin_lock_irqsave(&udc->lock, flags); + + epnum = usb_endpoint_num(ep->desc); + + /* EP0 */ + if (epnum == 0) { + ctrl = ast_udc_read(udc, AST_UDC_EP0_CTRL); + if (value) + ctrl |= EP0_STALL; + else + ctrl &= ~EP0_STALL; + + ast_udc_write(udc, ctrl, AST_UDC_EP0_CTRL); + + } else { + /* EPn */ + ctrl = ast_udc_read(udc, AST_UDC_EP_CONFIG); + if (value) + ctrl |= EP_SET_EP_STALL; + else + ctrl &= ~EP_SET_EP_STALL; + + ast_ep_write(ep, ctrl, AST_UDC_EP_CONFIG); + + /* only epn is stopped and waits for clear */ + ep->stopped = value ? 1 : 0; + } + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static const struct usb_ep_ops ast_udc_ep_ops = { + .enable = ast_udc_ep_enable, + .disable = ast_udc_ep_disable, + .alloc_request = ast_udc_ep_alloc_request, + .free_request = ast_udc_ep_free_request, + .queue = ast_udc_ep_queue, + .dequeue = ast_udc_ep_dequeue, + .set_halt = ast_udc_ep_set_halt, + /* there's only imprecise fifo status reporting */ +}; + +static void ast_udc_ep0_rx(struct ast_udc_dev *udc) +{ + ast_udc_write(udc, udc->ep0_buf_dma, AST_UDC_EP0_DATA_BUFF); + ast_udc_write(udc, EP0_RX_BUFF_RDY, AST_UDC_EP0_CTRL); +} + +static void ast_udc_ep0_tx(struct ast_udc_dev *udc) +{ + ast_udc_write(udc, udc->ep0_buf_dma, AST_UDC_EP0_DATA_BUFF); + ast_udc_write(udc, EP0_TX_BUFF_RDY, AST_UDC_EP0_CTRL); +} + +static void ast_udc_ep0_out(struct ast_udc_dev *udc) +{ + struct device *dev = &udc->pdev->dev; + struct ast_udc_ep *ep = &udc->ep[0]; + struct ast_udc_request *req; + u16 rx_len; + + if (list_empty(&ep->queue)) + return; + + req = list_entry(ep->queue.next, struct ast_udc_request, queue); + + rx_len = EP0_GET_RX_LEN(ast_udc_read(udc, AST_UDC_EP0_CTRL)); + req->req.actual += rx_len; + + SETUP_DBG(udc, "req %p (%d/%d)\n", req, + req->req.actual, req->req.length); + + if ((rx_len < ep->ep.maxpacket) || + (req->req.actual == req->req.length)) { + ast_udc_ep0_tx(udc); + if (!ep->dir_in) + ast_udc_done(ep, req, 0); + + } else { + if (rx_len > req->req.length) { + // Issue Fix + dev_warn(dev, "Something wrong (%d/%d)\n", + req->req.actual, req->req.length); + ast_udc_ep0_tx(udc); + ast_udc_done(ep, req, 0); + return; + } + + ep->dir_in = 0; + + /* More works */ + ast_udc_ep0_queue(ep, req); + } +} + +static void ast_udc_ep0_in(struct ast_udc_dev *udc) +{ + struct ast_udc_ep *ep = &udc->ep[0]; + struct ast_udc_request *req; + + if (list_empty(&ep->queue)) { + if (udc->is_control_tx) { + ast_udc_ep0_rx(udc); + udc->is_control_tx = 0; + } + + return; + } + + req = list_entry(ep->queue.next, struct ast_udc_request, queue); + + SETUP_DBG(udc, "req %p (%d/%d)\n", req, + req->req.actual, req->req.length); + + if (req->req.length == req->req.actual) { + if (req->req.length) + ast_udc_ep0_rx(udc); + + if (ep->dir_in) + ast_udc_done(ep, req, 0); + + } else { + /* More works */ + ast_udc_ep0_queue(ep, req); + } +} + +static void ast_udc_epn_handle(struct ast_udc_dev *udc, u16 ep_num) +{ + struct ast_udc_ep *ep = &udc->ep[ep_num]; + struct ast_udc_request *req; + u16 len = 0; + + if (list_empty(&ep->queue)) + return; + + req = list_first_entry(&ep->queue, struct ast_udc_request, queue); + + len = EP_DMA_GET_TX_SIZE(ast_ep_read(ep, AST_UDC_EP_DMA_STS)); + req->req.actual += len; + + EP_DBG(ep, "req @%p, length:(%d/%d), %s:0x%x\n", req, + req->req.actual, req->req.length, "len", len); + + /* Done this request */ + if (req->req.length == req->req.actual) { + ast_udc_done(ep, req, 0); + req = list_first_entry_or_null(&ep->queue, + struct ast_udc_request, + queue); + + } else { + /* Check for short packet */ + if (len < ep->ep.maxpacket) { + ast_udc_done(ep, req, 0); + req = list_first_entry_or_null(&ep->queue, + struct ast_udc_request, + queue); + } + } + + /* More requests */ + if (req) + ast_udc_epn_kick(ep, req); +} + +static void ast_udc_epn_handle_desc(struct ast_udc_dev *udc, u16 ep_num) +{ + struct ast_udc_ep *ep = &udc->ep[ep_num]; + struct device *dev = &udc->pdev->dev; + struct ast_udc_request *req; + u32 proc_sts, wr_ptr, rd_ptr; + u32 len_in_desc, ctrl; + u16 total_len = 0; + int i; + + if (list_empty(&ep->queue)) { + dev_warn(dev, "%s request queue empty!\n", ep->ep.name); + return; + } + + req = list_first_entry(&ep->queue, struct ast_udc_request, queue); + + ctrl = ast_ep_read(ep, AST_UDC_EP_DMA_CTRL); + proc_sts = EP_DMA_CTRL_GET_PROC_STS(ctrl); + + /* Check processing status is idle */ + if (proc_sts != EP_DMA_CTRL_STS_RX_IDLE && + proc_sts != EP_DMA_CTRL_STS_TX_IDLE) { + dev_warn(dev, "EP DMA CTRL: 0x%x, PS:0x%x\n", + ast_ep_read(ep, AST_UDC_EP_DMA_CTRL), + proc_sts); + return; + } + + ctrl = ast_ep_read(ep, AST_UDC_EP_DMA_STS); + rd_ptr = EP_DMA_GET_RPTR(ctrl); + wr_ptr = EP_DMA_GET_WPTR(ctrl); + + if (rd_ptr != wr_ptr) { + dev_warn(dev, "desc list is not empty ! %s:%d, %s:%d\n", + "rptr", rd_ptr, "wptr", wr_ptr); + return; + } + + EP_DBG(ep, "rd_ptr:%d, wr_ptr:%d\n", rd_ptr, wr_ptr); + i = req->saved_dma_wptr; + + do { + len_in_desc = EP_DESC1_IN_LEN(ep->descs[i].des_1); + EP_DBG(ep, "desc[%d] len: %d\n", i, len_in_desc); + total_len += len_in_desc; + i++; + if (i >= AST_UDC_DESCS_COUNT) + i = 0; + + } while (i != wr_ptr); + + req->req.actual += total_len; + + EP_DBG(ep, "req @%p, length:(%d/%d), %s:0x%x\n", req, + req->req.actual, req->req.length, "len", total_len); + + /* Done this request */ + if (req->req.length == req->req.actual) { + ast_udc_done(ep, req, 0); + req = list_first_entry_or_null(&ep->queue, + struct ast_udc_request, + queue); + + } else { + /* Check for short packet */ + if (total_len < ep->ep.maxpacket) { + ast_udc_done(ep, req, 0); + req = list_first_entry_or_null(&ep->queue, + struct ast_udc_request, + queue); + } + } + + /* More requests & dma descs not setup yet */ + if (req && (req->actual_dma_length == req->req.actual)) { + EP_DBG(ep, "More requests\n"); + ast_udc_epn_kick_desc(ep, req); + } +} + +static void ast_udc_ep0_data_tx(struct ast_udc_dev *udc, u8 *tx_data, u32 len) +{ + if (len) { + memcpy(udc->ep0_buf, tx_data, len); + + ast_udc_write(udc, udc->ep0_buf_dma, AST_UDC_EP0_DATA_BUFF); + ast_udc_write(udc, EP0_TX_LEN(len), AST_UDC_EP0_CTRL); + ast_udc_write(udc, EP0_TX_LEN(len) | EP0_TX_BUFF_RDY, + AST_UDC_EP0_CTRL); + udc->is_control_tx = 1; + + } else + ast_udc_write(udc, EP0_TX_BUFF_RDY, AST_UDC_EP0_CTRL); +} + +static void ast_udc_getstatus(struct ast_udc_dev *udc) +{ + struct usb_ctrlrequest crq; + struct ast_udc_ep *ep; + u16 status = 0; + u16 epnum = 0; + + memcpy_fromio(&crq, udc->creq, sizeof(crq)); + + switch (crq.bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + /* Get device status */ + status = 1 << USB_DEVICE_SELF_POWERED; + break; + case USB_RECIP_INTERFACE: + break; + case USB_RECIP_ENDPOINT: + epnum = crq.wIndex & USB_ENDPOINT_NUMBER_MASK; + status = udc->ep[epnum].stopped; + break; + default: + goto stall; + } + + ep = &udc->ep[epnum]; + EP_DBG(ep, "status: 0x%x\n", status); + ast_udc_ep0_data_tx(udc, (u8 *)&status, sizeof(status)); + + return; + +stall: + EP_DBG(ep, "Can't respond request\n"); + ast_udc_write(udc, ast_udc_read(udc, AST_UDC_EP0_CTRL) | EP0_STALL, + AST_UDC_EP0_CTRL); +} + +static void ast_udc_ep0_handle_setup(struct ast_udc_dev *udc) +{ + struct ast_udc_ep *ep = &udc->ep[0]; + struct ast_udc_request *req; + struct usb_ctrlrequest crq; + int req_num = 0; + int rc = 0; + u32 reg; + + memcpy_fromio(&crq, udc->creq, sizeof(crq)); + + SETUP_DBG(udc, "SETUP packet: %02x/%02x/%04x/%04x/%04x\n", + crq.bRequestType, crq.bRequest, le16_to_cpu(crq.wValue), + le16_to_cpu(crq.wIndex), le16_to_cpu(crq.wLength)); + + /* + * Cleanup ep0 request(s) in queue because + * there is a new control setup comes. + */ + list_for_each_entry(req, &udc->ep[0].queue, queue) { + req_num++; + EP_DBG(ep, "there is req %p in ep0 queue !\n", req); + } + + if (req_num) + ast_udc_nuke(&udc->ep[0], -ETIMEDOUT); + + udc->ep[0].dir_in = crq.bRequestType & USB_DIR_IN; + + if ((crq.bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { + switch (crq.bRequest) { + case USB_REQ_SET_ADDRESS: + if (ast_udc_read(udc, AST_UDC_STS) & UDC_STS_HIGHSPEED) + udc->gadget.speed = USB_SPEED_HIGH; + else + udc->gadget.speed = USB_SPEED_FULL; + + SETUP_DBG(udc, "set addr: 0x%x\n", crq.wValue); + reg = ast_udc_read(udc, AST_UDC_CONFIG); + reg &= ~UDC_CFG_ADDR_MASK; + reg |= UDC_CFG_SET_ADDR(crq.wValue); + ast_udc_write(udc, reg, AST_UDC_CONFIG); + goto req_complete; + + case USB_REQ_CLEAR_FEATURE: + SETUP_DBG(udc, "ep0: CLEAR FEATURE\n"); + goto req_driver; + + case USB_REQ_SET_FEATURE: + SETUP_DBG(udc, "ep0: SET FEATURE\n"); + goto req_driver; + + case USB_REQ_GET_STATUS: + ast_udc_getstatus(udc); + return; + + default: + goto req_driver; + } + + } + +req_driver: + if (udc->driver) { + SETUP_DBG(udc, "Forwarding %s to gadget...\n", + udc->gadget.name); + + spin_unlock(&udc->lock); + rc = udc->driver->setup(&udc->gadget, &crq); + spin_lock(&udc->lock); + + } else { + SETUP_DBG(udc, "No gadget for request !\n"); + } + + if (rc >= 0) + return; + + /* Stall if gadget failed */ + SETUP_DBG(udc, "Stalling, rc:0x%x\n", rc); + ast_udc_write(udc, ast_udc_read(udc, AST_UDC_EP0_CTRL) | EP0_STALL, + AST_UDC_EP0_CTRL); + return; + +req_complete: + SETUP_DBG(udc, "ep0: Sending IN status without data\n"); + ast_udc_write(udc, EP0_TX_BUFF_RDY, AST_UDC_EP0_CTRL); +} + +static irqreturn_t ast_udc_isr(int irq, void *data) +{ + struct ast_udc_dev *udc = (struct ast_udc_dev *)data; + struct ast_udc_ep *ep; + u32 isr, ep_isr; + int i; + + spin_lock(&udc->lock); + + isr = ast_udc_read(udc, AST_UDC_ISR); + if (!isr) + goto done; + + /* Ack interrupts */ + ast_udc_write(udc, isr, AST_UDC_ISR); + + if (isr & UDC_IRQ_BUS_RESET) { + ISR_DBG(udc, "UDC_IRQ_BUS_RESET\n"); + udc->gadget.speed = USB_SPEED_UNKNOWN; + + ep = &udc->ep[1]; + EP_DBG(ep, "dctrl:0x%x\n", + ast_ep_read(ep, AST_UDC_EP_DMA_CTRL)); + + if (udc->driver && udc->driver->reset) { + spin_unlock(&udc->lock); + udc->driver->reset(&udc->gadget); + spin_lock(&udc->lock); + } + } + + if (isr & UDC_IRQ_BUS_SUSPEND) { + ISR_DBG(udc, "UDC_IRQ_BUS_SUSPEND\n"); + udc->suspended_from = udc->gadget.state; + usb_gadget_set_state(&udc->gadget, USB_STATE_SUSPENDED); + + if (udc->driver && udc->driver->suspend) { + spin_unlock(&udc->lock); + udc->driver->suspend(&udc->gadget); + spin_lock(&udc->lock); + } + } + + if (isr & UDC_IRQ_BUS_RESUME) { + ISR_DBG(udc, "UDC_IRQ_BUS_RESUME\n"); + usb_gadget_set_state(&udc->gadget, udc->suspended_from); + + if (udc->driver && udc->driver->resume) { + spin_unlock(&udc->lock); + udc->driver->resume(&udc->gadget); + spin_lock(&udc->lock); + } + } + + if (isr & UDC_IRQ_EP0_IN_ACK_STALL) { + ISR_DBG(udc, "UDC_IRQ_EP0_IN_ACK_STALL\n"); + ast_udc_ep0_in(udc); + } + + if (isr & UDC_IRQ_EP0_OUT_ACK_STALL) { + ISR_DBG(udc, "UDC_IRQ_EP0_OUT_ACK_STALL\n"); + ast_udc_ep0_out(udc); + } + + if (isr & UDC_IRQ_EP0_SETUP) { + ISR_DBG(udc, "UDC_IRQ_EP0_SETUP\n"); + ast_udc_ep0_handle_setup(udc); + } + + if (isr & UDC_IRQ_EP_POOL_ACK_STALL) { + ISR_DBG(udc, "UDC_IRQ_EP_POOL_ACK_STALL\n"); + ep_isr = ast_udc_read(udc, AST_UDC_EP_ACK_ISR); + + /* Ack EP interrupts */ + ast_udc_write(udc, ep_isr, AST_UDC_EP_ACK_ISR); + + /* Handle each EP */ + for (i = 0; i < AST_UDC_NUM_ENDPOINTS - 1; i++) { + if (ep_isr & (0x1 << i)) { + ep = &udc->ep[i + 1]; + if (ep->desc_mode) + ast_udc_epn_handle_desc(udc, i + 1); + else + ast_udc_epn_handle(udc, i + 1); + } + } + } + +done: + spin_unlock(&udc->lock); + return IRQ_HANDLED; +} + +static int ast_udc_gadget_getframe(struct usb_gadget *gadget) +{ + struct ast_udc_dev *udc = to_ast_dev(gadget); + + return (ast_udc_read(udc, AST_UDC_STS) >> 16) & 0x7ff; +} + +static void ast_udc_wake_work(struct work_struct *work) +{ + struct ast_udc_dev *udc = container_of(work, struct ast_udc_dev, + wake_work); + unsigned long flags; + u32 ctrl; + + spin_lock_irqsave(&udc->lock, flags); + + UDC_DBG(udc, "Wakeup Host !\n"); + ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL); + ast_udc_write(udc, ctrl | USB_REMOTE_WAKEUP_EN, AST_UDC_FUNC_CTRL); + + spin_unlock_irqrestore(&udc->lock, flags); +} + +static void ast_udc_wakeup_all(struct ast_udc_dev *udc) +{ + /* + * A device is trying to wake the world, because this + * can recurse into the device, we break the call chain + * using a work queue + */ + schedule_work(&udc->wake_work); +} + +static int ast_udc_wakeup(struct usb_gadget *gadget) +{ + struct ast_udc_dev *udc = to_ast_dev(gadget); + unsigned long flags; + int rc = 0; + + spin_lock_irqsave(&udc->lock, flags); + + if (!udc->wakeup_en) { + UDC_DBG(udc, "Remote Wakeup is disabled\n"); + rc = -EINVAL; + goto err; + } + + UDC_DBG(udc, "Device initiated wakeup\n"); + ast_udc_wakeup_all(udc); + +err: + spin_unlock_irqrestore(&udc->lock, flags); + return rc; +} + +/* + * Activate/Deactivate link with host + */ +static int ast_udc_pullup(struct usb_gadget *gadget, int is_on) +{ + struct ast_udc_dev *udc = to_ast_dev(gadget); + unsigned long flags; + u32 ctrl; + + spin_lock_irqsave(&udc->lock, flags); + + UDC_DBG(udc, "is_on: %d\n", is_on); + if (is_on) + ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL) | USB_UPSTREAM_EN; + else + ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL) & ~USB_UPSTREAM_EN; + + ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL); + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static int ast_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct ast_udc_dev *udc = to_ast_dev(gadget); + struct ast_udc_ep *ep; + unsigned long flags; + int i; + + spin_lock_irqsave(&udc->lock, flags); + + UDC_DBG(udc, "\n"); + udc->driver = driver; + udc->gadget.dev.of_node = udc->pdev->dev.of_node; + + for (i = 0; i < AST_UDC_NUM_ENDPOINTS; i++) { + ep = &udc->ep[i]; + ep->stopped = 0; + } + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static int ast_udc_stop(struct usb_gadget *gadget) +{ + struct ast_udc_dev *udc = to_ast_dev(gadget); + unsigned long flags; + u32 ctrl; + + spin_lock_irqsave(&udc->lock, flags); + + UDC_DBG(udc, "\n"); + ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL) & ~USB_UPSTREAM_EN; + ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL); + + udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->driver = NULL; + + ast_udc_stop_activity(udc); + usb_gadget_set_state(&udc->gadget, USB_STATE_NOTATTACHED); + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static const struct usb_gadget_ops ast_udc_ops = { + .get_frame = ast_udc_gadget_getframe, + .wakeup = ast_udc_wakeup, + .pullup = ast_udc_pullup, + .udc_start = ast_udc_start, + .udc_stop = ast_udc_stop, +}; + +/* + * Support 1 Control Endpoint. + * Support multiple programmable endpoints that can be configured to + * Bulk IN/OUT, Interrupt IN/OUT, and Isochronous IN/OUT type endpoint. + */ +static void ast_udc_init_ep(struct ast_udc_dev *udc) +{ + struct ast_udc_ep *ep; + int i; + + for (i = 0; i < AST_UDC_NUM_ENDPOINTS; i++) { + ep = &udc->ep[i]; + ep->ep.name = ast_ep_name[i]; + if (i == 0) { + ep->ep.caps.type_control = true; + } else { + ep->ep.caps.type_iso = true; + ep->ep.caps.type_bulk = true; + ep->ep.caps.type_int = true; + } + ep->ep.caps.dir_in = true; + ep->ep.caps.dir_out = true; + + ep->ep.ops = &ast_udc_ep_ops; + ep->udc = udc; + + INIT_LIST_HEAD(&ep->queue); + + if (i == 0) { + usb_ep_set_maxpacket_limit(&ep->ep, + AST_UDC_EP0_MAX_PACKET); + continue; + } + + ep->ep_reg = udc->reg + AST_UDC_EP_BASE + + (AST_UDC_EP_OFFSET * (i - 1)); + + ep->epn_buf = udc->ep0_buf + (i * AST_UDC_EP_DMA_SIZE); + ep->epn_buf_dma = udc->ep0_buf_dma + (i * AST_UDC_EP_DMA_SIZE); + usb_ep_set_maxpacket_limit(&ep->ep, AST_UDC_EPn_MAX_PACKET); + + ep->descs = ep->epn_buf + AST_UDC_EPn_MAX_PACKET; + ep->descs_dma = ep->epn_buf_dma + AST_UDC_EPn_MAX_PACKET; + ep->descs_wptr = 0; + + list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); + } +} + +static void ast_udc_init_dev(struct ast_udc_dev *udc) +{ + INIT_WORK(&udc->wake_work, ast_udc_wake_work); +} + +static void ast_udc_init_hw(struct ast_udc_dev *udc) +{ + u32 ctrl; + + /* Enable PHY */ + ctrl = USB_PHY_CLK_EN | USB_PHY_RESET_DIS; + ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL); + + udelay(1); + ast_udc_write(udc, 0, AST_UDC_DEV_RESET); + + /* Set descriptor ring size */ + if (AST_UDC_DESCS_COUNT == 256) { + ctrl |= USB_EP_LONG_DESC; + ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL); + } + + /* Mask & ack all interrupts before installing the handler */ + ast_udc_write(udc, 0, AST_UDC_IER); + ast_udc_write(udc, UDC_IRQ_ACK_ALL, AST_UDC_ISR); + + /* Enable some interrupts */ + ctrl = UDC_IRQ_EP_POOL_ACK_STALL | UDC_IRQ_BUS_RESUME | + UDC_IRQ_BUS_SUSPEND | UDC_IRQ_BUS_RESET | + UDC_IRQ_EP0_IN_ACK_STALL | UDC_IRQ_EP0_OUT_ACK_STALL | + UDC_IRQ_EP0_SETUP; + ast_udc_write(udc, ctrl, AST_UDC_IER); + + /* Cleanup and enable ep ACK interrupts */ + ast_udc_write(udc, UDC_IRQ_EP_ACK_ALL, AST_UDC_EP_ACK_IER); + ast_udc_write(udc, UDC_IRQ_EP_ACK_ALL, AST_UDC_EP_ACK_ISR); + + ast_udc_write(udc, 0, AST_UDC_EP0_CTRL); +} + +static int ast_udc_remove(struct platform_device *pdev) +{ + struct ast_udc_dev *udc = platform_get_drvdata(pdev); + unsigned long flags; + u32 ctrl; + + usb_del_gadget_udc(&udc->gadget); + if (udc->driver) + return -EBUSY; + + spin_lock_irqsave(&udc->lock, flags); + + /* Disable upstream port connection */ + ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL) & ~USB_UPSTREAM_EN; + ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL); + + clk_disable_unprepare(udc->clk); + + spin_unlock_irqrestore(&udc->lock, flags); + + if (udc->ep0_buf) + dma_free_coherent(&pdev->dev, + AST_UDC_EP_DMA_SIZE * AST_UDC_NUM_ENDPOINTS, + udc->ep0_buf, + udc->ep0_buf_dma); + + udc->ep0_buf = NULL; + + return 0; +} + +static int ast_udc_probe(struct platform_device *pdev) +{ + enum usb_device_speed max_speed; + struct device *dev = &pdev->dev; + struct ast_udc_dev *udc; + struct resource *res; + int rc; + + udc = devm_kzalloc(&pdev->dev, sizeof(struct ast_udc_dev), GFP_KERNEL); + if (!udc) + return -ENOMEM; + + udc->gadget.dev.parent = dev; + udc->pdev = pdev; + spin_lock_init(&udc->lock); + + udc->gadget.ops = &ast_udc_ops; + udc->gadget.ep0 = &udc->ep[0].ep; + udc->gadget.name = "aspeed-udc"; + udc->gadget.dev.init_name = "gadget"; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + udc->reg = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(udc->reg)) { + dev_err(&pdev->dev, "Failed to map resources\n"); + return PTR_ERR(udc->reg); + } + + platform_set_drvdata(pdev, udc); + + udc->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(udc->clk)) { + rc = PTR_ERR(udc->clk); + goto err; + } + rc = clk_prepare_enable(udc->clk); + if (rc) { + dev_err(&pdev->dev, "Failed to enable clock (0x%x)\n", rc); + goto err; + } + + /* Check if we need to limit the HW to USB1 */ + max_speed = usb_get_maximum_speed(&pdev->dev); + if (max_speed != USB_SPEED_UNKNOWN && max_speed < USB_SPEED_HIGH) + udc->force_usb1 = true; + + /* + * Allocate DMA buffers for all EPs in one chunk + */ + udc->ep0_buf = dma_alloc_coherent(&pdev->dev, + AST_UDC_EP_DMA_SIZE * + AST_UDC_NUM_ENDPOINTS, + &udc->ep0_buf_dma, GFP_KERNEL); + + udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->gadget.max_speed = USB_SPEED_HIGH; + udc->creq = udc->reg + AST_UDC_SETUP0; + + /* + * Support single stage mode or 32/256 stages descriptor mode. + * Set default as Descriptor Mode. + */ + udc->desc_mode = AST_UDC_DESC_MODE; + + dev_info(&pdev->dev, "DMA %s\n", udc->desc_mode ? + "descriptor mode" : "single mode"); + + INIT_LIST_HEAD(&udc->gadget.ep_list); + INIT_LIST_HEAD(&udc->gadget.ep0->ep_list); + + /* Initialized udc ep */ + ast_udc_init_ep(udc); + + /* Initialized udc device */ + ast_udc_init_dev(udc); + + /* Initialized udc hardware */ + ast_udc_init_hw(udc); + + /* Find interrupt and install handler */ + udc->irq = platform_get_irq(pdev, 0); + if (udc->irq < 0) { + rc = udc->irq; + goto err; + } + + rc = devm_request_irq(&pdev->dev, udc->irq, ast_udc_isr, 0, + KBUILD_MODNAME, udc); + if (rc) { + dev_err(&pdev->dev, "Failed to request interrupt\n"); + goto err; + } + + rc = usb_add_gadget_udc(&pdev->dev, &udc->gadget); + if (rc) { + dev_err(&pdev->dev, "Failed to add gadget udc\n"); + goto err; + } + + dev_info(&pdev->dev, "Initialized udc in USB%s mode\n", + udc->force_usb1 ? "1" : "2"); + + return 0; + +err: + dev_err(&pdev->dev, "Failed to udc probe, rc:0x%x\n", rc); + ast_udc_remove(pdev); + + return rc; +} + +static const struct of_device_id ast_udc_of_dt_ids[] = { + { .compatible = "aspeed,ast2600-udc", }, + {} +}; + +MODULE_DEVICE_TABLE(of, ast_udc_of_dt_ids); + +static struct platform_driver ast_udc_driver = { + .probe = ast_udc_probe, + .remove = ast_udc_remove, + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = ast_udc_of_dt_ids, + }, +}; + +module_platform_driver(ast_udc_driver); + +MODULE_DESCRIPTION("ASPEED UDC driver"); +MODULE_AUTHOR("Neal Liu <neal_liu@aspeedtech.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/udc/at91_udc.c b/drivers/usb/gadget/udc/at91_udc.c new file mode 100644 index 000000000..a9a7b3fc6 --- /dev/null +++ b/drivers/usb/gadget/udc/at91_udc.c @@ -0,0 +1,2021 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * at91_udc -- driver for at91-series USB peripheral controller + * + * Copyright (C) 2004 by Thomas Rathbone + * Copyright (C) 2005 by HP Labs + * Copyright (C) 2005 by David Brownell + */ + +#undef VERBOSE_DEBUG +#undef PACKET_TRACE + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/prefetch.h> +#include <linux/clk.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/of.h> +#include <linux/gpio/consumer.h> +#include <linux/platform_data/atmel.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/atmel-matrix.h> + +#include "at91_udc.h" + + +/* + * This controller is simple and PIO-only. It's used in many AT91-series + * full speed USB controllers, including the at91rm9200 (arm920T, with MMU), + * at91sam926x (arm926ejs, with MMU), and several no-mmu versions. + * + * This driver expects the board has been wired with two GPIOs supporting + * a VBUS sensing IRQ, and a D+ pullup. (They may be omitted, but the + * testing hasn't covered such cases.) + * + * The pullup is most important (so it's integrated on sam926x parts). It + * provides software control over whether the host enumerates the device. + * + * The VBUS sensing helps during enumeration, and allows both USB clocks + * (and the transceiver) to stay gated off until they're necessary, saving + * power. During USB suspend, the 48 MHz clock is gated off in hardware; + * it may also be gated off by software during some Linux sleep states. + */ + +#define DRIVER_VERSION "3 May 2006" + +static const char driver_name [] = "at91_udc"; + +static const struct { + const char *name; + const struct usb_ep_caps caps; +} ep_info[] = { +#define EP_INFO(_name, _caps) \ + { \ + .name = _name, \ + .caps = _caps, \ + } + + EP_INFO("ep0", + USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, USB_EP_CAPS_DIR_ALL)), + EP_INFO("ep1", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_ALL)), + EP_INFO("ep2", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_ALL)), + EP_INFO("ep3-int", + USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_ALL)), + EP_INFO("ep4", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_ALL)), + EP_INFO("ep5", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_ALL)), + +#undef EP_INFO +}; + +#define ep0name ep_info[0].name + +#define VBUS_POLL_TIMEOUT msecs_to_jiffies(1000) + +#define at91_udp_read(udc, reg) \ + __raw_readl((udc)->udp_baseaddr + (reg)) +#define at91_udp_write(udc, reg, val) \ + __raw_writel((val), (udc)->udp_baseaddr + (reg)) + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + +#include <linux/seq_file.h> + +static const char debug_filename[] = "driver/udc"; + +#define FOURBITS "%s%s%s%s" +#define EIGHTBITS FOURBITS FOURBITS + +static void proc_ep_show(struct seq_file *s, struct at91_ep *ep) +{ + static char *types[] = { + "control", "out-iso", "out-bulk", "out-int", + "BOGUS", "in-iso", "in-bulk", "in-int"}; + + u32 csr; + struct at91_request *req; + unsigned long flags; + struct at91_udc *udc = ep->udc; + + spin_lock_irqsave(&udc->lock, flags); + + csr = __raw_readl(ep->creg); + + /* NOTE: not collecting per-endpoint irq statistics... */ + + seq_printf(s, "\n"); + seq_printf(s, "%s, maxpacket %d %s%s %s%s\n", + ep->ep.name, ep->ep.maxpacket, + ep->is_in ? "in" : "out", + ep->is_iso ? " iso" : "", + ep->is_pingpong + ? (ep->fifo_bank ? "pong" : "ping") + : "", + ep->stopped ? " stopped" : ""); + seq_printf(s, "csr %08x rxbytes=%d %s %s %s" EIGHTBITS "\n", + csr, + (csr & 0x07ff0000) >> 16, + (csr & (1 << 15)) ? "enabled" : "disabled", + (csr & (1 << 11)) ? "DATA1" : "DATA0", + types[(csr & 0x700) >> 8], + + /* iff type is control then print current direction */ + (!(csr & 0x700)) + ? ((csr & (1 << 7)) ? " IN" : " OUT") + : "", + (csr & (1 << 6)) ? " rxdatabk1" : "", + (csr & (1 << 5)) ? " forcestall" : "", + (csr & (1 << 4)) ? " txpktrdy" : "", + + (csr & (1 << 3)) ? " stallsent" : "", + (csr & (1 << 2)) ? " rxsetup" : "", + (csr & (1 << 1)) ? " rxdatabk0" : "", + (csr & (1 << 0)) ? " txcomp" : ""); + if (list_empty (&ep->queue)) + seq_printf(s, "\t(queue empty)\n"); + + else list_for_each_entry (req, &ep->queue, queue) { + unsigned length = req->req.actual; + + seq_printf(s, "\treq %p len %d/%d buf %p\n", + &req->req, length, + req->req.length, req->req.buf); + } + spin_unlock_irqrestore(&udc->lock, flags); +} + +static void proc_irq_show(struct seq_file *s, const char *label, u32 mask) +{ + int i; + + seq_printf(s, "%s %04x:%s%s" FOURBITS, label, mask, + (mask & (1 << 13)) ? " wakeup" : "", + (mask & (1 << 12)) ? " endbusres" : "", + + (mask & (1 << 11)) ? " sofint" : "", + (mask & (1 << 10)) ? " extrsm" : "", + (mask & (1 << 9)) ? " rxrsm" : "", + (mask & (1 << 8)) ? " rxsusp" : ""); + for (i = 0; i < 8; i++) { + if (mask & (1 << i)) + seq_printf(s, " ep%d", i); + } + seq_printf(s, "\n"); +} + +static int proc_udc_show(struct seq_file *s, void *unused) +{ + struct at91_udc *udc = s->private; + struct at91_ep *ep; + u32 tmp; + + seq_printf(s, "%s: version %s\n", driver_name, DRIVER_VERSION); + + seq_printf(s, "vbus %s, pullup %s, %s powered%s, gadget %s\n\n", + udc->vbus ? "present" : "off", + udc->enabled + ? (udc->vbus ? "active" : "enabled") + : "disabled", + udc->gadget.is_selfpowered ? "self" : "VBUS", + udc->suspended ? ", suspended" : "", + udc->driver ? udc->driver->driver.name : "(none)"); + + /* don't access registers when interface isn't clocked */ + if (!udc->clocked) { + seq_printf(s, "(not clocked)\n"); + return 0; + } + + tmp = at91_udp_read(udc, AT91_UDP_FRM_NUM); + seq_printf(s, "frame %05x:%s%s frame=%d\n", tmp, + (tmp & AT91_UDP_FRM_OK) ? " ok" : "", + (tmp & AT91_UDP_FRM_ERR) ? " err" : "", + (tmp & AT91_UDP_NUM)); + + tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT); + seq_printf(s, "glbstate %02x:%s" FOURBITS "\n", tmp, + (tmp & AT91_UDP_RMWUPE) ? " rmwupe" : "", + (tmp & AT91_UDP_RSMINPR) ? " rsminpr" : "", + (tmp & AT91_UDP_ESR) ? " esr" : "", + (tmp & AT91_UDP_CONFG) ? " confg" : "", + (tmp & AT91_UDP_FADDEN) ? " fadden" : ""); + + tmp = at91_udp_read(udc, AT91_UDP_FADDR); + seq_printf(s, "faddr %03x:%s fadd=%d\n", tmp, + (tmp & AT91_UDP_FEN) ? " fen" : "", + (tmp & AT91_UDP_FADD)); + + proc_irq_show(s, "imr ", at91_udp_read(udc, AT91_UDP_IMR)); + proc_irq_show(s, "isr ", at91_udp_read(udc, AT91_UDP_ISR)); + + if (udc->enabled && udc->vbus) { + proc_ep_show(s, &udc->ep[0]); + list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) { + if (ep->ep.desc) + proc_ep_show(s, ep); + } + } + return 0; +} + +static void create_debug_file(struct at91_udc *udc) +{ + udc->pde = proc_create_single_data(debug_filename, 0, NULL, + proc_udc_show, udc); +} + +static void remove_debug_file(struct at91_udc *udc) +{ + if (udc->pde) + remove_proc_entry(debug_filename, NULL); +} + +#else + +static inline void create_debug_file(struct at91_udc *udc) {} +static inline void remove_debug_file(struct at91_udc *udc) {} + +#endif + + +/*-------------------------------------------------------------------------*/ + +static void done(struct at91_ep *ep, struct at91_request *req, int status) +{ + unsigned stopped = ep->stopped; + struct at91_udc *udc = ep->udc; + + list_del_init(&req->queue); + if (req->req.status == -EINPROGRESS) + req->req.status = status; + else + status = req->req.status; + if (status && status != -ESHUTDOWN) + VDBG("%s done %p, status %d\n", ep->ep.name, req, status); + + ep->stopped = 1; + spin_unlock(&udc->lock); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&udc->lock); + ep->stopped = stopped; + + /* ep0 is always ready; other endpoints need a non-empty queue */ + if (list_empty(&ep->queue) && ep->int_mask != (1 << 0)) + at91_udp_write(udc, AT91_UDP_IDR, ep->int_mask); +} + +/*-------------------------------------------------------------------------*/ + +/* bits indicating OUT fifo has data ready */ +#define RX_DATA_READY (AT91_UDP_RX_DATA_BK0 | AT91_UDP_RX_DATA_BK1) + +/* + * Endpoint FIFO CSR bits have a mix of bits, making it unsafe to just write + * back most of the value you just read (because of side effects, including + * bits that may change after reading and before writing). + * + * Except when changing a specific bit, always write values which: + * - clear SET_FX bits (setting them could change something) + * - set CLR_FX bits (clearing them could change something) + * + * There are also state bits like FORCESTALL, EPEDS, DIR, and EPTYPE + * that shouldn't normally be changed. + * + * NOTE at91sam9260 docs mention synch between UDPCK and MCK clock domains, + * implying a need to wait for one write to complete (test relevant bits) + * before starting the next write. This shouldn't be an issue given how + * infrequently we write, except maybe for write-then-read idioms. + */ +#define SET_FX (AT91_UDP_TXPKTRDY) +#define CLR_FX (RX_DATA_READY | AT91_UDP_RXSETUP \ + | AT91_UDP_STALLSENT | AT91_UDP_TXCOMP) + +/* pull OUT packet data from the endpoint's fifo */ +static int read_fifo (struct at91_ep *ep, struct at91_request *req) +{ + u32 __iomem *creg = ep->creg; + u8 __iomem *dreg = ep->creg + (AT91_UDP_FDR(0) - AT91_UDP_CSR(0)); + u32 csr; + u8 *buf; + unsigned int count, bufferspace, is_done; + + buf = req->req.buf + req->req.actual; + bufferspace = req->req.length - req->req.actual; + + /* + * there might be nothing to read if ep_queue() calls us, + * or if we already emptied both pingpong buffers + */ +rescan: + csr = __raw_readl(creg); + if ((csr & RX_DATA_READY) == 0) + return 0; + + count = (csr & AT91_UDP_RXBYTECNT) >> 16; + if (count > ep->ep.maxpacket) + count = ep->ep.maxpacket; + if (count > bufferspace) { + DBG("%s buffer overflow\n", ep->ep.name); + req->req.status = -EOVERFLOW; + count = bufferspace; + } + __raw_readsb(dreg, buf, count); + + /* release and swap pingpong mem bank */ + csr |= CLR_FX; + if (ep->is_pingpong) { + if (ep->fifo_bank == 0) { + csr &= ~(SET_FX | AT91_UDP_RX_DATA_BK0); + ep->fifo_bank = 1; + } else { + csr &= ~(SET_FX | AT91_UDP_RX_DATA_BK1); + ep->fifo_bank = 0; + } + } else + csr &= ~(SET_FX | AT91_UDP_RX_DATA_BK0); + __raw_writel(csr, creg); + + req->req.actual += count; + is_done = (count < ep->ep.maxpacket); + if (count == bufferspace) + is_done = 1; + + PACKET("%s %p out/%d%s\n", ep->ep.name, &req->req, count, + is_done ? " (done)" : ""); + + /* + * avoid extra trips through IRQ logic for packets already in + * the fifo ... maybe preventing an extra (expensive) OUT-NAK + */ + if (is_done) + done(ep, req, 0); + else if (ep->is_pingpong) { + /* + * One dummy read to delay the code because of a HW glitch: + * CSR returns bad RXCOUNT when read too soon after updating + * RX_DATA_BK flags. + */ + csr = __raw_readl(creg); + + bufferspace -= count; + buf += count; + goto rescan; + } + + return is_done; +} + +/* load fifo for an IN packet */ +static int write_fifo(struct at91_ep *ep, struct at91_request *req) +{ + u32 __iomem *creg = ep->creg; + u32 csr = __raw_readl(creg); + u8 __iomem *dreg = ep->creg + (AT91_UDP_FDR(0) - AT91_UDP_CSR(0)); + unsigned total, count, is_last; + u8 *buf; + + /* + * TODO: allow for writing two packets to the fifo ... that'll + * reduce the amount of IN-NAKing, but probably won't affect + * throughput much. (Unlike preventing OUT-NAKing!) + */ + + /* + * If ep_queue() calls us, the queue is empty and possibly in + * odd states like TXCOMP not yet cleared (we do it, saving at + * least one IRQ) or the fifo not yet being free. Those aren't + * issues normally (IRQ handler fast path). + */ + if (unlikely(csr & (AT91_UDP_TXCOMP | AT91_UDP_TXPKTRDY))) { + if (csr & AT91_UDP_TXCOMP) { + csr |= CLR_FX; + csr &= ~(SET_FX | AT91_UDP_TXCOMP); + __raw_writel(csr, creg); + csr = __raw_readl(creg); + } + if (csr & AT91_UDP_TXPKTRDY) + return 0; + } + + buf = req->req.buf + req->req.actual; + prefetch(buf); + total = req->req.length - req->req.actual; + if (ep->ep.maxpacket < total) { + count = ep->ep.maxpacket; + is_last = 0; + } else { + count = total; + is_last = (count < ep->ep.maxpacket) || !req->req.zero; + } + + /* + * Write the packet, maybe it's a ZLP. + * + * NOTE: incrementing req->actual before we receive the ACK means + * gadget driver IN bytecounts can be wrong in fault cases. That's + * fixable with PIO drivers like this one (save "count" here, and + * do the increment later on TX irq), but not for most DMA hardware. + * + * So all gadget drivers must accept that potential error. Some + * hardware supports precise fifo status reporting, letting them + * recover when the actual bytecount matters (e.g. for USB Test + * and Measurement Class devices). + */ + __raw_writesb(dreg, buf, count); + csr &= ~SET_FX; + csr |= CLR_FX | AT91_UDP_TXPKTRDY; + __raw_writel(csr, creg); + req->req.actual += count; + + PACKET("%s %p in/%d%s\n", ep->ep.name, &req->req, count, + is_last ? " (done)" : ""); + if (is_last) + done(ep, req, 0); + return is_last; +} + +static void nuke(struct at91_ep *ep, int status) +{ + struct at91_request *req; + + /* terminate any request in the queue */ + ep->stopped = 1; + if (list_empty(&ep->queue)) + return; + + VDBG("%s %s\n", __func__, ep->ep.name); + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct at91_request, queue); + done(ep, req, status); + } +} + +/*-------------------------------------------------------------------------*/ + +static int at91_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct at91_ep *ep = container_of(_ep, struct at91_ep, ep); + struct at91_udc *udc; + u16 maxpacket; + u32 tmp; + unsigned long flags; + + if (!_ep || !ep + || !desc || _ep->name == ep0name + || desc->bDescriptorType != USB_DT_ENDPOINT + || (maxpacket = usb_endpoint_maxp(desc)) == 0 + || maxpacket > ep->maxpacket) { + DBG("bad ep or descriptor\n"); + return -EINVAL; + } + + udc = ep->udc; + if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) { + DBG("bogus device state\n"); + return -ESHUTDOWN; + } + + tmp = usb_endpoint_type(desc); + switch (tmp) { + case USB_ENDPOINT_XFER_CONTROL: + DBG("only one control endpoint\n"); + return -EINVAL; + case USB_ENDPOINT_XFER_INT: + if (maxpacket > 64) + goto bogus_max; + break; + case USB_ENDPOINT_XFER_BULK: + switch (maxpacket) { + case 8: + case 16: + case 32: + case 64: + goto ok; + } +bogus_max: + DBG("bogus maxpacket %d\n", maxpacket); + return -EINVAL; + case USB_ENDPOINT_XFER_ISOC: + if (!ep->is_pingpong) { + DBG("iso requires double buffering\n"); + return -EINVAL; + } + break; + } + +ok: + spin_lock_irqsave(&udc->lock, flags); + + /* initialize endpoint to match this descriptor */ + ep->is_in = usb_endpoint_dir_in(desc); + ep->is_iso = (tmp == USB_ENDPOINT_XFER_ISOC); + ep->stopped = 0; + if (ep->is_in) + tmp |= 0x04; + tmp <<= 8; + tmp |= AT91_UDP_EPEDS; + __raw_writel(tmp, ep->creg); + + ep->ep.maxpacket = maxpacket; + + /* + * reset/init endpoint fifo. NOTE: leaves fifo_bank alone, + * since endpoint resets don't reset hw pingpong state. + */ + at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask); + at91_udp_write(udc, AT91_UDP_RST_EP, 0); + + spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} + +static int at91_ep_disable (struct usb_ep * _ep) +{ + struct at91_ep *ep = container_of(_ep, struct at91_ep, ep); + struct at91_udc *udc = ep->udc; + unsigned long flags; + + if (ep == &ep->udc->ep[0]) + return -EINVAL; + + spin_lock_irqsave(&udc->lock, flags); + + nuke(ep, -ESHUTDOWN); + + /* restore the endpoint's pristine config */ + ep->ep.desc = NULL; + ep->ep.maxpacket = ep->maxpacket; + + /* reset fifos and endpoint */ + if (ep->udc->clocked) { + at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask); + at91_udp_write(udc, AT91_UDP_RST_EP, 0); + __raw_writel(0, ep->creg); + } + + spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} + +/* + * this is a PIO-only driver, so there's nothing + * interesting for request or buffer allocation. + */ + +static struct usb_request * +at91_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) +{ + struct at91_request *req; + + req = kzalloc(sizeof (struct at91_request), gfp_flags); + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->queue); + return &req->req; +} + +static void at91_ep_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct at91_request *req; + + req = container_of(_req, struct at91_request, req); + BUG_ON(!list_empty(&req->queue)); + kfree(req); +} + +static int at91_ep_queue(struct usb_ep *_ep, + struct usb_request *_req, gfp_t gfp_flags) +{ + struct at91_request *req; + struct at91_ep *ep; + struct at91_udc *udc; + int status; + unsigned long flags; + + req = container_of(_req, struct at91_request, req); + ep = container_of(_ep, struct at91_ep, ep); + + if (!_req || !_req->complete + || !_req->buf || !list_empty(&req->queue)) { + DBG("invalid request\n"); + return -EINVAL; + } + + if (!_ep || (!ep->ep.desc && ep->ep.name != ep0name)) { + DBG("invalid ep\n"); + return -EINVAL; + } + + udc = ep->udc; + + if (!udc || !udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) { + DBG("invalid device\n"); + return -EINVAL; + } + + _req->status = -EINPROGRESS; + _req->actual = 0; + + spin_lock_irqsave(&udc->lock, flags); + + /* try to kickstart any empty and idle queue */ + if (list_empty(&ep->queue) && !ep->stopped) { + int is_ep0; + + /* + * If this control request has a non-empty DATA stage, this + * will start that stage. It works just like a non-control + * request (until the status stage starts, maybe early). + * + * If the data stage is empty, then this starts a successful + * IN/STATUS stage. (Unsuccessful ones use set_halt.) + */ + is_ep0 = (ep->ep.name == ep0name); + if (is_ep0) { + u32 tmp; + + if (!udc->req_pending) { + status = -EINVAL; + goto done; + } + + /* + * defer changing CONFG until after the gadget driver + * reconfigures the endpoints. + */ + if (udc->wait_for_config_ack) { + tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT); + tmp ^= AT91_UDP_CONFG; + VDBG("toggle config\n"); + at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp); + } + if (req->req.length == 0) { +ep0_in_status: + PACKET("ep0 in/status\n"); + status = 0; + tmp = __raw_readl(ep->creg); + tmp &= ~SET_FX; + tmp |= CLR_FX | AT91_UDP_TXPKTRDY; + __raw_writel(tmp, ep->creg); + udc->req_pending = 0; + goto done; + } + } + + if (ep->is_in) + status = write_fifo(ep, req); + else { + status = read_fifo(ep, req); + + /* IN/STATUS stage is otherwise triggered by irq */ + if (status && is_ep0) + goto ep0_in_status; + } + } else + status = 0; + + if (req && !status) { + list_add_tail (&req->queue, &ep->queue); + at91_udp_write(udc, AT91_UDP_IER, ep->int_mask); + } +done: + spin_unlock_irqrestore(&udc->lock, flags); + return (status < 0) ? status : 0; +} + +static int at91_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct at91_ep *ep; + struct at91_request *req = NULL, *iter; + unsigned long flags; + struct at91_udc *udc; + + ep = container_of(_ep, struct at91_ep, ep); + if (!_ep || ep->ep.name == ep0name) + return -EINVAL; + + udc = ep->udc; + + spin_lock_irqsave(&udc->lock, flags); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry(iter, &ep->queue, queue) { + if (&iter->req != _req) + continue; + req = iter; + break; + } + if (!req) { + spin_unlock_irqrestore(&udc->lock, flags); + return -EINVAL; + } + + done(ep, req, -ECONNRESET); + spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} + +static int at91_ep_set_halt(struct usb_ep *_ep, int value) +{ + struct at91_ep *ep = container_of(_ep, struct at91_ep, ep); + struct at91_udc *udc = ep->udc; + u32 __iomem *creg; + u32 csr; + unsigned long flags; + int status = 0; + + if (!_ep || ep->is_iso || !ep->udc->clocked) + return -EINVAL; + + creg = ep->creg; + spin_lock_irqsave(&udc->lock, flags); + + csr = __raw_readl(creg); + + /* + * fail with still-busy IN endpoints, ensuring correct sequencing + * of data tx then stall. note that the fifo rx bytecount isn't + * completely accurate as a tx bytecount. + */ + if (ep->is_in && (!list_empty(&ep->queue) || (csr >> 16) != 0)) + status = -EAGAIN; + else { + csr |= CLR_FX; + csr &= ~SET_FX; + if (value) { + csr |= AT91_UDP_FORCESTALL; + VDBG("halt %s\n", ep->ep.name); + } else { + at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask); + at91_udp_write(udc, AT91_UDP_RST_EP, 0); + csr &= ~AT91_UDP_FORCESTALL; + } + __raw_writel(csr, creg); + } + + spin_unlock_irqrestore(&udc->lock, flags); + return status; +} + +static const struct usb_ep_ops at91_ep_ops = { + .enable = at91_ep_enable, + .disable = at91_ep_disable, + .alloc_request = at91_ep_alloc_request, + .free_request = at91_ep_free_request, + .queue = at91_ep_queue, + .dequeue = at91_ep_dequeue, + .set_halt = at91_ep_set_halt, + /* there's only imprecise fifo status reporting */ +}; + +/*-------------------------------------------------------------------------*/ + +static int at91_get_frame(struct usb_gadget *gadget) +{ + struct at91_udc *udc = to_udc(gadget); + + if (!to_udc(gadget)->clocked) + return -EINVAL; + return at91_udp_read(udc, AT91_UDP_FRM_NUM) & AT91_UDP_NUM; +} + +static int at91_wakeup(struct usb_gadget *gadget) +{ + struct at91_udc *udc = to_udc(gadget); + u32 glbstate; + unsigned long flags; + + DBG("%s\n", __func__ ); + spin_lock_irqsave(&udc->lock, flags); + + if (!udc->clocked || !udc->suspended) + goto done; + + /* NOTE: some "early versions" handle ESR differently ... */ + + glbstate = at91_udp_read(udc, AT91_UDP_GLB_STAT); + if (!(glbstate & AT91_UDP_ESR)) + goto done; + glbstate |= AT91_UDP_ESR; + at91_udp_write(udc, AT91_UDP_GLB_STAT, glbstate); + +done: + spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} + +/* reinit == restore initial software state */ +static void udc_reinit(struct at91_udc *udc) +{ + u32 i; + + INIT_LIST_HEAD(&udc->gadget.ep_list); + INIT_LIST_HEAD(&udc->gadget.ep0->ep_list); + udc->gadget.quirk_stall_not_supp = 1; + + for (i = 0; i < NUM_ENDPOINTS; i++) { + struct at91_ep *ep = &udc->ep[i]; + + if (i != 0) + list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); + ep->ep.desc = NULL; + ep->stopped = 0; + ep->fifo_bank = 0; + usb_ep_set_maxpacket_limit(&ep->ep, ep->maxpacket); + ep->creg = (void __iomem *) udc->udp_baseaddr + AT91_UDP_CSR(i); + /* initialize one queue per endpoint */ + INIT_LIST_HEAD(&ep->queue); + } +} + +static void reset_gadget(struct at91_udc *udc) +{ + struct usb_gadget_driver *driver = udc->driver; + int i; + + if (udc->gadget.speed == USB_SPEED_UNKNOWN) + driver = NULL; + udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->suspended = 0; + + for (i = 0; i < NUM_ENDPOINTS; i++) { + struct at91_ep *ep = &udc->ep[i]; + + ep->stopped = 1; + nuke(ep, -ESHUTDOWN); + } + if (driver) { + spin_unlock(&udc->lock); + usb_gadget_udc_reset(&udc->gadget, driver); + spin_lock(&udc->lock); + } + + udc_reinit(udc); +} + +static void stop_activity(struct at91_udc *udc) +{ + struct usb_gadget_driver *driver = udc->driver; + int i; + + if (udc->gadget.speed == USB_SPEED_UNKNOWN) + driver = NULL; + udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->suspended = 0; + + for (i = 0; i < NUM_ENDPOINTS; i++) { + struct at91_ep *ep = &udc->ep[i]; + ep->stopped = 1; + nuke(ep, -ESHUTDOWN); + } + if (driver) { + spin_unlock(&udc->lock); + driver->disconnect(&udc->gadget); + spin_lock(&udc->lock); + } + + udc_reinit(udc); +} + +static void clk_on(struct at91_udc *udc) +{ + if (udc->clocked) + return; + udc->clocked = 1; + + clk_enable(udc->iclk); + clk_enable(udc->fclk); +} + +static void clk_off(struct at91_udc *udc) +{ + if (!udc->clocked) + return; + udc->clocked = 0; + udc->gadget.speed = USB_SPEED_UNKNOWN; + clk_disable(udc->fclk); + clk_disable(udc->iclk); +} + +/* + * activate/deactivate link with host; minimize power usage for + * inactive links by cutting clocks and transceiver power. + */ +static void pullup(struct at91_udc *udc, int is_on) +{ + if (!udc->enabled || !udc->vbus) + is_on = 0; + DBG("%sactive\n", is_on ? "" : "in"); + + if (is_on) { + clk_on(udc); + at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXRSM); + at91_udp_write(udc, AT91_UDP_TXVC, 0); + } else { + stop_activity(udc); + at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXRSM); + at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS); + clk_off(udc); + } + + if (udc->caps && udc->caps->pullup) + udc->caps->pullup(udc, is_on); +} + +/* vbus is here! turn everything on that's ready */ +static int at91_vbus_session(struct usb_gadget *gadget, int is_active) +{ + struct at91_udc *udc = to_udc(gadget); + unsigned long flags; + + /* VDBG("vbus %s\n", is_active ? "on" : "off"); */ + spin_lock_irqsave(&udc->lock, flags); + udc->vbus = (is_active != 0); + if (udc->driver) + pullup(udc, is_active); + else + pullup(udc, 0); + spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} + +static int at91_pullup(struct usb_gadget *gadget, int is_on) +{ + struct at91_udc *udc = to_udc(gadget); + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + udc->enabled = is_on = !!is_on; + pullup(udc, is_on); + spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} + +static int at91_set_selfpowered(struct usb_gadget *gadget, int is_on) +{ + struct at91_udc *udc = to_udc(gadget); + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + gadget->is_selfpowered = (is_on != 0); + spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} + +static int at91_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver); +static int at91_stop(struct usb_gadget *gadget); + +static const struct usb_gadget_ops at91_udc_ops = { + .get_frame = at91_get_frame, + .wakeup = at91_wakeup, + .set_selfpowered = at91_set_selfpowered, + .vbus_session = at91_vbus_session, + .pullup = at91_pullup, + .udc_start = at91_start, + .udc_stop = at91_stop, + + /* + * VBUS-powered devices may also want to support bigger + * power budgets after an appropriate SET_CONFIGURATION. + */ + /* .vbus_power = at91_vbus_power, */ +}; + +/*-------------------------------------------------------------------------*/ + +static int handle_ep(struct at91_ep *ep) +{ + struct at91_request *req; + u32 __iomem *creg = ep->creg; + u32 csr = __raw_readl(creg); + + if (!list_empty(&ep->queue)) + req = list_entry(ep->queue.next, + struct at91_request, queue); + else + req = NULL; + + if (ep->is_in) { + if (csr & (AT91_UDP_STALLSENT | AT91_UDP_TXCOMP)) { + csr |= CLR_FX; + csr &= ~(SET_FX | AT91_UDP_STALLSENT | AT91_UDP_TXCOMP); + __raw_writel(csr, creg); + } + if (req) + return write_fifo(ep, req); + + } else { + if (csr & AT91_UDP_STALLSENT) { + /* STALLSENT bit == ISOERR */ + if (ep->is_iso && req) + req->req.status = -EILSEQ; + csr |= CLR_FX; + csr &= ~(SET_FX | AT91_UDP_STALLSENT); + __raw_writel(csr, creg); + csr = __raw_readl(creg); + } + if (req && (csr & RX_DATA_READY)) + return read_fifo(ep, req); + } + return 0; +} + +union setup { + u8 raw[8]; + struct usb_ctrlrequest r; +}; + +static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr) +{ + u32 __iomem *creg = ep->creg; + u8 __iomem *dreg = ep->creg + (AT91_UDP_FDR(0) - AT91_UDP_CSR(0)); + unsigned rxcount, i = 0; + u32 tmp; + union setup pkt; + int status = 0; + + /* read and ack SETUP; hard-fail for bogus packets */ + rxcount = (csr & AT91_UDP_RXBYTECNT) >> 16; + if (likely(rxcount == 8)) { + while (rxcount--) + pkt.raw[i++] = __raw_readb(dreg); + if (pkt.r.bRequestType & USB_DIR_IN) { + csr |= AT91_UDP_DIR; + ep->is_in = 1; + } else { + csr &= ~AT91_UDP_DIR; + ep->is_in = 0; + } + } else { + /* REVISIT this happens sometimes under load; why?? */ + ERR("SETUP len %d, csr %08x\n", rxcount, csr); + status = -EINVAL; + } + csr |= CLR_FX; + csr &= ~(SET_FX | AT91_UDP_RXSETUP); + __raw_writel(csr, creg); + udc->wait_for_addr_ack = 0; + udc->wait_for_config_ack = 0; + ep->stopped = 0; + if (unlikely(status != 0)) + goto stall; + +#define w_index le16_to_cpu(pkt.r.wIndex) +#define w_value le16_to_cpu(pkt.r.wValue) +#define w_length le16_to_cpu(pkt.r.wLength) + + VDBG("SETUP %02x.%02x v%04x i%04x l%04x\n", + pkt.r.bRequestType, pkt.r.bRequest, + w_value, w_index, w_length); + + /* + * A few standard requests get handled here, ones that touch + * hardware ... notably for device and endpoint features. + */ + udc->req_pending = 1; + csr = __raw_readl(creg); + csr |= CLR_FX; + csr &= ~SET_FX; + switch ((pkt.r.bRequestType << 8) | pkt.r.bRequest) { + + case ((USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8) + | USB_REQ_SET_ADDRESS: + __raw_writel(csr | AT91_UDP_TXPKTRDY, creg); + udc->addr = w_value; + udc->wait_for_addr_ack = 1; + udc->req_pending = 0; + /* FADDR is set later, when we ack host STATUS */ + return; + + case ((USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8) + | USB_REQ_SET_CONFIGURATION: + tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT) & AT91_UDP_CONFG; + if (pkt.r.wValue) + udc->wait_for_config_ack = (tmp == 0); + else + udc->wait_for_config_ack = (tmp != 0); + if (udc->wait_for_config_ack) + VDBG("wait for config\n"); + /* CONFG is toggled later, if gadget driver succeeds */ + break; + + /* + * Hosts may set or clear remote wakeup status, and + * devices may report they're VBUS powered. + */ + case ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8) + | USB_REQ_GET_STATUS: + tmp = (udc->gadget.is_selfpowered << USB_DEVICE_SELF_POWERED); + if (at91_udp_read(udc, AT91_UDP_GLB_STAT) & AT91_UDP_ESR) + tmp |= (1 << USB_DEVICE_REMOTE_WAKEUP); + PACKET("get device status\n"); + __raw_writeb(tmp, dreg); + __raw_writeb(0, dreg); + goto write_in; + /* then STATUS starts later, automatically */ + case ((USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8) + | USB_REQ_SET_FEATURE: + if (w_value != USB_DEVICE_REMOTE_WAKEUP) + goto stall; + tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT); + tmp |= AT91_UDP_ESR; + at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp); + goto succeed; + case ((USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8) + | USB_REQ_CLEAR_FEATURE: + if (w_value != USB_DEVICE_REMOTE_WAKEUP) + goto stall; + tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT); + tmp &= ~AT91_UDP_ESR; + at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp); + goto succeed; + + /* + * Interfaces have no feature settings; this is pretty useless. + * we won't even insist the interface exists... + */ + case ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE) << 8) + | USB_REQ_GET_STATUS: + PACKET("get interface status\n"); + __raw_writeb(0, dreg); + __raw_writeb(0, dreg); + goto write_in; + /* then STATUS starts later, automatically */ + case ((USB_TYPE_STANDARD|USB_RECIP_INTERFACE) << 8) + | USB_REQ_SET_FEATURE: + case ((USB_TYPE_STANDARD|USB_RECIP_INTERFACE) << 8) + | USB_REQ_CLEAR_FEATURE: + goto stall; + + /* + * Hosts may clear bulk/intr endpoint halt after the gadget + * driver sets it (not widely used); or set it (for testing) + */ + case ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT) << 8) + | USB_REQ_GET_STATUS: + tmp = w_index & USB_ENDPOINT_NUMBER_MASK; + ep = &udc->ep[tmp]; + if (tmp >= NUM_ENDPOINTS || (tmp && !ep->ep.desc)) + goto stall; + + if (tmp) { + if ((w_index & USB_DIR_IN)) { + if (!ep->is_in) + goto stall; + } else if (ep->is_in) + goto stall; + } + PACKET("get %s status\n", ep->ep.name); + if (__raw_readl(ep->creg) & AT91_UDP_FORCESTALL) + tmp = (1 << USB_ENDPOINT_HALT); + else + tmp = 0; + __raw_writeb(tmp, dreg); + __raw_writeb(0, dreg); + goto write_in; + /* then STATUS starts later, automatically */ + case ((USB_TYPE_STANDARD|USB_RECIP_ENDPOINT) << 8) + | USB_REQ_SET_FEATURE: + tmp = w_index & USB_ENDPOINT_NUMBER_MASK; + ep = &udc->ep[tmp]; + if (w_value != USB_ENDPOINT_HALT || tmp >= NUM_ENDPOINTS) + goto stall; + if (!ep->ep.desc || ep->is_iso) + goto stall; + if ((w_index & USB_DIR_IN)) { + if (!ep->is_in) + goto stall; + } else if (ep->is_in) + goto stall; + + tmp = __raw_readl(ep->creg); + tmp &= ~SET_FX; + tmp |= CLR_FX | AT91_UDP_FORCESTALL; + __raw_writel(tmp, ep->creg); + goto succeed; + case ((USB_TYPE_STANDARD|USB_RECIP_ENDPOINT) << 8) + | USB_REQ_CLEAR_FEATURE: + tmp = w_index & USB_ENDPOINT_NUMBER_MASK; + ep = &udc->ep[tmp]; + if (w_value != USB_ENDPOINT_HALT || tmp >= NUM_ENDPOINTS) + goto stall; + if (tmp == 0) + goto succeed; + if (!ep->ep.desc || ep->is_iso) + goto stall; + if ((w_index & USB_DIR_IN)) { + if (!ep->is_in) + goto stall; + } else if (ep->is_in) + goto stall; + + at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask); + at91_udp_write(udc, AT91_UDP_RST_EP, 0); + tmp = __raw_readl(ep->creg); + tmp |= CLR_FX; + tmp &= ~(SET_FX | AT91_UDP_FORCESTALL); + __raw_writel(tmp, ep->creg); + if (!list_empty(&ep->queue)) + handle_ep(ep); + goto succeed; + } + +#undef w_value +#undef w_index +#undef w_length + + /* pass request up to the gadget driver */ + if (udc->driver) { + spin_unlock(&udc->lock); + status = udc->driver->setup(&udc->gadget, &pkt.r); + spin_lock(&udc->lock); + } + else + status = -ENODEV; + if (status < 0) { +stall: + VDBG("req %02x.%02x protocol STALL; stat %d\n", + pkt.r.bRequestType, pkt.r.bRequest, status); + csr |= AT91_UDP_FORCESTALL; + __raw_writel(csr, creg); + udc->req_pending = 0; + } + return; + +succeed: + /* immediate successful (IN) STATUS after zero length DATA */ + PACKET("ep0 in/status\n"); +write_in: + csr |= AT91_UDP_TXPKTRDY; + __raw_writel(csr, creg); + udc->req_pending = 0; +} + +static void handle_ep0(struct at91_udc *udc) +{ + struct at91_ep *ep0 = &udc->ep[0]; + u32 __iomem *creg = ep0->creg; + u32 csr = __raw_readl(creg); + struct at91_request *req; + + if (unlikely(csr & AT91_UDP_STALLSENT)) { + nuke(ep0, -EPROTO); + udc->req_pending = 0; + csr |= CLR_FX; + csr &= ~(SET_FX | AT91_UDP_STALLSENT | AT91_UDP_FORCESTALL); + __raw_writel(csr, creg); + VDBG("ep0 stalled\n"); + csr = __raw_readl(creg); + } + if (csr & AT91_UDP_RXSETUP) { + nuke(ep0, 0); + udc->req_pending = 0; + handle_setup(udc, ep0, csr); + return; + } + + if (list_empty(&ep0->queue)) + req = NULL; + else + req = list_entry(ep0->queue.next, struct at91_request, queue); + + /* host ACKed an IN packet that we sent */ + if (csr & AT91_UDP_TXCOMP) { + csr |= CLR_FX; + csr &= ~(SET_FX | AT91_UDP_TXCOMP); + + /* write more IN DATA? */ + if (req && ep0->is_in) { + if (handle_ep(ep0)) + udc->req_pending = 0; + + /* + * Ack after: + * - last IN DATA packet (including GET_STATUS) + * - IN/STATUS for OUT DATA + * - IN/STATUS for any zero-length DATA stage + * except for the IN DATA case, the host should send + * an OUT status later, which we'll ack. + */ + } else { + udc->req_pending = 0; + __raw_writel(csr, creg); + + /* + * SET_ADDRESS takes effect only after the STATUS + * (to the original address) gets acked. + */ + if (udc->wait_for_addr_ack) { + u32 tmp; + + at91_udp_write(udc, AT91_UDP_FADDR, + AT91_UDP_FEN | udc->addr); + tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT); + tmp &= ~AT91_UDP_FADDEN; + if (udc->addr) + tmp |= AT91_UDP_FADDEN; + at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp); + + udc->wait_for_addr_ack = 0; + VDBG("address %d\n", udc->addr); + } + } + } + + /* OUT packet arrived ... */ + else if (csr & AT91_UDP_RX_DATA_BK0) { + csr |= CLR_FX; + csr &= ~(SET_FX | AT91_UDP_RX_DATA_BK0); + + /* OUT DATA stage */ + if (!ep0->is_in) { + if (req) { + if (handle_ep(ep0)) { + /* send IN/STATUS */ + PACKET("ep0 in/status\n"); + csr = __raw_readl(creg); + csr &= ~SET_FX; + csr |= CLR_FX | AT91_UDP_TXPKTRDY; + __raw_writel(csr, creg); + udc->req_pending = 0; + } + } else if (udc->req_pending) { + /* + * AT91 hardware has a hard time with this + * "deferred response" mode for control-OUT + * transfers. (For control-IN it's fine.) + * + * The normal solution leaves OUT data in the + * fifo until the gadget driver is ready. + * We couldn't do that here without disabling + * the IRQ that tells about SETUP packets, + * e.g. when the host gets impatient... + * + * Working around it by copying into a buffer + * would almost be a non-deferred response, + * except that it wouldn't permit reliable + * stalling of the request. Instead, demand + * that gadget drivers not use this mode. + */ + DBG("no control-OUT deferred responses!\n"); + __raw_writel(csr | AT91_UDP_FORCESTALL, creg); + udc->req_pending = 0; + } + + /* STATUS stage for control-IN; ack. */ + } else { + PACKET("ep0 out/status ACK\n"); + __raw_writel(csr, creg); + + /* "early" status stage */ + if (req) + done(ep0, req, 0); + } + } +} + +static irqreturn_t at91_udc_irq (int irq, void *_udc) +{ + struct at91_udc *udc = _udc; + u32 rescans = 5; + int disable_clock = 0; + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + + if (!udc->clocked) { + clk_on(udc); + disable_clock = 1; + } + + while (rescans--) { + u32 status; + + status = at91_udp_read(udc, AT91_UDP_ISR) + & at91_udp_read(udc, AT91_UDP_IMR); + if (!status) + break; + + /* USB reset irq: not maskable */ + if (status & AT91_UDP_ENDBUSRES) { + at91_udp_write(udc, AT91_UDP_IDR, ~MINIMUS_INTERRUPTUS); + at91_udp_write(udc, AT91_UDP_IER, MINIMUS_INTERRUPTUS); + /* Atmel code clears this irq twice */ + at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_ENDBUSRES); + at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_ENDBUSRES); + VDBG("end bus reset\n"); + udc->addr = 0; + reset_gadget(udc); + + /* enable ep0 */ + at91_udp_write(udc, AT91_UDP_CSR(0), + AT91_UDP_EPEDS | AT91_UDP_EPTYPE_CTRL); + udc->gadget.speed = USB_SPEED_FULL; + udc->suspended = 0; + at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_EP(0)); + + /* + * NOTE: this driver keeps clocks off unless the + * USB host is present. That saves power, but for + * boards that don't support VBUS detection, both + * clocks need to be active most of the time. + */ + + /* host initiated suspend (3+ms bus idle) */ + } else if (status & AT91_UDP_RXSUSP) { + at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXSUSP); + at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_RXRSM); + at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXSUSP); + /* VDBG("bus suspend\n"); */ + if (udc->suspended) + continue; + udc->suspended = 1; + + /* + * NOTE: when suspending a VBUS-powered device, the + * gadget driver should switch into slow clock mode + * and then into standby to avoid drawing more than + * 500uA power (2500uA for some high-power configs). + */ + if (udc->driver && udc->driver->suspend) { + spin_unlock(&udc->lock); + udc->driver->suspend(&udc->gadget); + spin_lock(&udc->lock); + } + + /* host initiated resume */ + } else if (status & AT91_UDP_RXRSM) { + at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXRSM); + at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_RXSUSP); + at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXRSM); + /* VDBG("bus resume\n"); */ + if (!udc->suspended) + continue; + udc->suspended = 0; + + /* + * NOTE: for a VBUS-powered device, the gadget driver + * would normally want to switch out of slow clock + * mode into normal mode. + */ + if (udc->driver && udc->driver->resume) { + spin_unlock(&udc->lock); + udc->driver->resume(&udc->gadget); + spin_lock(&udc->lock); + } + + /* endpoint IRQs are cleared by handling them */ + } else { + int i; + unsigned mask = 1; + struct at91_ep *ep = &udc->ep[1]; + + if (status & mask) + handle_ep0(udc); + for (i = 1; i < NUM_ENDPOINTS; i++) { + mask <<= 1; + if (status & mask) + handle_ep(ep); + ep++; + } + } + } + + if (disable_clock) + clk_off(udc); + + spin_unlock_irqrestore(&udc->lock, flags); + + return IRQ_HANDLED; +} + +/*-------------------------------------------------------------------------*/ + +static void at91_vbus_update(struct at91_udc *udc, unsigned value) +{ + if (value != udc->vbus) + at91_vbus_session(&udc->gadget, value); +} + +static irqreturn_t at91_vbus_irq(int irq, void *_udc) +{ + struct at91_udc *udc = _udc; + + /* vbus needs at least brief debouncing */ + udelay(10); + at91_vbus_update(udc, gpiod_get_value(udc->board.vbus_pin)); + + return IRQ_HANDLED; +} + +static void at91_vbus_timer_work(struct work_struct *work) +{ + struct at91_udc *udc = container_of(work, struct at91_udc, + vbus_timer_work); + + at91_vbus_update(udc, gpiod_get_value_cansleep(udc->board.vbus_pin)); + + if (!timer_pending(&udc->vbus_timer)) + mod_timer(&udc->vbus_timer, jiffies + VBUS_POLL_TIMEOUT); +} + +static void at91_vbus_timer(struct timer_list *t) +{ + struct at91_udc *udc = from_timer(udc, t, vbus_timer); + + /* + * If we are polling vbus it is likely that the gpio is on an + * bus such as i2c or spi which may sleep, so schedule some work + * to read the vbus gpio + */ + schedule_work(&udc->vbus_timer_work); +} + +static int at91_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct at91_udc *udc; + + udc = container_of(gadget, struct at91_udc, gadget); + udc->driver = driver; + udc->gadget.dev.of_node = udc->pdev->dev.of_node; + udc->enabled = 1; + udc->gadget.is_selfpowered = 1; + + return 0; +} + +static int at91_stop(struct usb_gadget *gadget) +{ + struct at91_udc *udc; + unsigned long flags; + + udc = container_of(gadget, struct at91_udc, gadget); + spin_lock_irqsave(&udc->lock, flags); + udc->enabled = 0; + at91_udp_write(udc, AT91_UDP_IDR, ~0); + spin_unlock_irqrestore(&udc->lock, flags); + + udc->driver = NULL; + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static void at91udc_shutdown(struct platform_device *dev) +{ + struct at91_udc *udc = platform_get_drvdata(dev); + unsigned long flags; + + /* force disconnect on reboot */ + spin_lock_irqsave(&udc->lock, flags); + pullup(platform_get_drvdata(dev), 0); + spin_unlock_irqrestore(&udc->lock, flags); +} + +static int at91rm9200_udc_init(struct at91_udc *udc) +{ + struct at91_ep *ep; + int i; + + for (i = 0; i < NUM_ENDPOINTS; i++) { + ep = &udc->ep[i]; + + switch (i) { + case 0: + case 3: + ep->maxpacket = 8; + break; + case 1 ... 2: + ep->maxpacket = 64; + break; + case 4 ... 5: + ep->maxpacket = 256; + break; + } + } + + if (!udc->board.pullup_pin) { + DBG("no D+ pullup?\n"); + return -ENODEV; + } + + gpiod_direction_output(udc->board.pullup_pin, + gpiod_is_active_low(udc->board.pullup_pin)); + + return 0; +} + +static void at91rm9200_udc_pullup(struct at91_udc *udc, int is_on) +{ + if (is_on) + gpiod_set_value(udc->board.pullup_pin, 1); + else + gpiod_set_value(udc->board.pullup_pin, 0); +} + +static const struct at91_udc_caps at91rm9200_udc_caps = { + .init = at91rm9200_udc_init, + .pullup = at91rm9200_udc_pullup, +}; + +static int at91sam9260_udc_init(struct at91_udc *udc) +{ + struct at91_ep *ep; + int i; + + for (i = 0; i < NUM_ENDPOINTS; i++) { + ep = &udc->ep[i]; + + switch (i) { + case 0 ... 3: + ep->maxpacket = 64; + break; + case 4 ... 5: + ep->maxpacket = 512; + break; + } + } + + return 0; +} + +static void at91sam9260_udc_pullup(struct at91_udc *udc, int is_on) +{ + u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC); + + if (is_on) + txvc |= AT91_UDP_TXVC_PUON; + else + txvc &= ~AT91_UDP_TXVC_PUON; + + at91_udp_write(udc, AT91_UDP_TXVC, txvc); +} + +static const struct at91_udc_caps at91sam9260_udc_caps = { + .init = at91sam9260_udc_init, + .pullup = at91sam9260_udc_pullup, +}; + +static int at91sam9261_udc_init(struct at91_udc *udc) +{ + struct at91_ep *ep; + int i; + + for (i = 0; i < NUM_ENDPOINTS; i++) { + ep = &udc->ep[i]; + + switch (i) { + case 0: + ep->maxpacket = 8; + break; + case 1 ... 3: + ep->maxpacket = 64; + break; + case 4 ... 5: + ep->maxpacket = 256; + break; + } + } + + udc->matrix = syscon_regmap_lookup_by_phandle(udc->pdev->dev.of_node, + "atmel,matrix"); + return PTR_ERR_OR_ZERO(udc->matrix); +} + +static void at91sam9261_udc_pullup(struct at91_udc *udc, int is_on) +{ + u32 usbpucr = 0; + + if (is_on) + usbpucr = AT91_MATRIX_USBPUCR_PUON; + + regmap_update_bits(udc->matrix, AT91SAM9261_MATRIX_USBPUCR, + AT91_MATRIX_USBPUCR_PUON, usbpucr); +} + +static const struct at91_udc_caps at91sam9261_udc_caps = { + .init = at91sam9261_udc_init, + .pullup = at91sam9261_udc_pullup, +}; + +static int at91sam9263_udc_init(struct at91_udc *udc) +{ + struct at91_ep *ep; + int i; + + for (i = 0; i < NUM_ENDPOINTS; i++) { + ep = &udc->ep[i]; + + switch (i) { + case 0: + case 1: + case 2: + case 3: + ep->maxpacket = 64; + break; + case 4: + case 5: + ep->maxpacket = 256; + break; + } + } + + return 0; +} + +static const struct at91_udc_caps at91sam9263_udc_caps = { + .init = at91sam9263_udc_init, + .pullup = at91sam9260_udc_pullup, +}; + +static const struct of_device_id at91_udc_dt_ids[] = { + { + .compatible = "atmel,at91rm9200-udc", + .data = &at91rm9200_udc_caps, + }, + { + .compatible = "atmel,at91sam9260-udc", + .data = &at91sam9260_udc_caps, + }, + { + .compatible = "atmel,at91sam9261-udc", + .data = &at91sam9261_udc_caps, + }, + { + .compatible = "atmel,at91sam9263-udc", + .data = &at91sam9263_udc_caps, + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, at91_udc_dt_ids); + +static void at91udc_of_init(struct at91_udc *udc, struct device_node *np) +{ + struct at91_udc_data *board = &udc->board; + const struct of_device_id *match; + u32 val; + + if (of_property_read_u32(np, "atmel,vbus-polled", &val) == 0) + board->vbus_polled = 1; + + board->vbus_pin = fwnode_gpiod_get_index(of_fwnode_handle(np), + "atmel,vbus", 0, GPIOD_IN, + "udc_vbus"); + if (IS_ERR(board->vbus_pin)) + board->vbus_pin = NULL; + + board->pullup_pin = fwnode_gpiod_get_index(of_fwnode_handle(np), + "atmel,pullup", 0, + GPIOD_ASIS, "udc_pullup"); + if (IS_ERR(board->pullup_pin)) + board->pullup_pin = NULL; + + match = of_match_node(at91_udc_dt_ids, np); + if (match) + udc->caps = match->data; +} + +static int at91udc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct at91_udc *udc; + int retval; + struct at91_ep *ep; + int i; + + udc = devm_kzalloc(dev, sizeof(*udc), GFP_KERNEL); + if (!udc) + return -ENOMEM; + + /* init software state */ + udc->gadget.dev.parent = dev; + at91udc_of_init(udc, pdev->dev.of_node); + udc->pdev = pdev; + udc->enabled = 0; + spin_lock_init(&udc->lock); + + udc->gadget.ops = &at91_udc_ops; + udc->gadget.ep0 = &udc->ep[0].ep; + udc->gadget.name = driver_name; + udc->gadget.dev.init_name = "gadget"; + + for (i = 0; i < NUM_ENDPOINTS; i++) { + ep = &udc->ep[i]; + ep->ep.name = ep_info[i].name; + ep->ep.caps = ep_info[i].caps; + ep->ep.ops = &at91_ep_ops; + ep->udc = udc; + ep->int_mask = BIT(i); + if (i != 0 && i != 3) + ep->is_pingpong = 1; + } + + udc->udp_baseaddr = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(udc->udp_baseaddr)) + return PTR_ERR(udc->udp_baseaddr); + + if (udc->caps && udc->caps->init) { + retval = udc->caps->init(udc); + if (retval) + return retval; + } + + udc_reinit(udc); + + /* get interface and function clocks */ + udc->iclk = devm_clk_get(dev, "pclk"); + if (IS_ERR(udc->iclk)) + return PTR_ERR(udc->iclk); + + udc->fclk = devm_clk_get(dev, "hclk"); + if (IS_ERR(udc->fclk)) + return PTR_ERR(udc->fclk); + + /* don't do anything until we have both gadget driver and VBUS */ + clk_set_rate(udc->fclk, 48000000); + retval = clk_prepare(udc->fclk); + if (retval) + return retval; + + retval = clk_prepare_enable(udc->iclk); + if (retval) + goto err_unprepare_fclk; + + at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS); + at91_udp_write(udc, AT91_UDP_IDR, 0xffffffff); + /* Clear all pending interrupts - UDP may be used by bootloader. */ + at91_udp_write(udc, AT91_UDP_ICR, 0xffffffff); + clk_disable(udc->iclk); + + /* request UDC and maybe VBUS irqs */ + udc->udp_irq = retval = platform_get_irq(pdev, 0); + if (retval < 0) + goto err_unprepare_iclk; + retval = devm_request_irq(dev, udc->udp_irq, at91_udc_irq, 0, + driver_name, udc); + if (retval) { + DBG("request irq %d failed\n", udc->udp_irq); + goto err_unprepare_iclk; + } + + if (udc->board.vbus_pin) { + gpiod_direction_input(udc->board.vbus_pin); + + /* + * Get the initial state of VBUS - we cannot expect + * a pending interrupt. + */ + udc->vbus = gpiod_get_value_cansleep(udc->board.vbus_pin); + + if (udc->board.vbus_polled) { + INIT_WORK(&udc->vbus_timer_work, at91_vbus_timer_work); + timer_setup(&udc->vbus_timer, at91_vbus_timer, 0); + mod_timer(&udc->vbus_timer, + jiffies + VBUS_POLL_TIMEOUT); + } else { + retval = devm_request_irq(dev, + gpiod_to_irq(udc->board.vbus_pin), + at91_vbus_irq, 0, driver_name, udc); + if (retval) { + DBG("request vbus irq %d failed\n", + desc_to_gpio(udc->board.vbus_pin)); + goto err_unprepare_iclk; + } + } + } else { + DBG("no VBUS detection, assuming always-on\n"); + udc->vbus = 1; + } + retval = usb_add_gadget_udc(dev, &udc->gadget); + if (retval) + goto err_unprepare_iclk; + dev_set_drvdata(dev, udc); + device_init_wakeup(dev, 1); + create_debug_file(udc); + + INFO("%s version %s\n", driver_name, DRIVER_VERSION); + return 0; + +err_unprepare_iclk: + clk_unprepare(udc->iclk); +err_unprepare_fclk: + clk_unprepare(udc->fclk); + + DBG("%s probe failed, %d\n", driver_name, retval); + + return retval; +} + +static int at91udc_remove(struct platform_device *pdev) +{ + struct at91_udc *udc = platform_get_drvdata(pdev); + unsigned long flags; + + DBG("remove\n"); + + usb_del_gadget_udc(&udc->gadget); + if (udc->driver) + return -EBUSY; + + spin_lock_irqsave(&udc->lock, flags); + pullup(udc, 0); + spin_unlock_irqrestore(&udc->lock, flags); + + device_init_wakeup(&pdev->dev, 0); + remove_debug_file(udc); + clk_unprepare(udc->fclk); + clk_unprepare(udc->iclk); + + return 0; +} + +#ifdef CONFIG_PM +static int at91udc_suspend(struct platform_device *pdev, pm_message_t mesg) +{ + struct at91_udc *udc = platform_get_drvdata(pdev); + int wake = udc->driver && device_may_wakeup(&pdev->dev); + unsigned long flags; + + /* Unless we can act normally to the host (letting it wake us up + * whenever it has work for us) force disconnect. Wakeup requires + * PLLB for USB events (signaling for reset, wakeup, or incoming + * tokens) and VBUS irqs (on systems which support them). + */ + if ((!udc->suspended && udc->addr) + || !wake + || at91_suspend_entering_slow_clock()) { + spin_lock_irqsave(&udc->lock, flags); + pullup(udc, 0); + wake = 0; + spin_unlock_irqrestore(&udc->lock, flags); + } else + enable_irq_wake(udc->udp_irq); + + udc->active_suspend = wake; + if (udc->board.vbus_pin && !udc->board.vbus_polled && wake) + enable_irq_wake(gpiod_to_irq(udc->board.vbus_pin)); + return 0; +} + +static int at91udc_resume(struct platform_device *pdev) +{ + struct at91_udc *udc = platform_get_drvdata(pdev); + unsigned long flags; + + if (udc->board.vbus_pin && !udc->board.vbus_polled && + udc->active_suspend) + disable_irq_wake(gpiod_to_irq(udc->board.vbus_pin)); + + /* maybe reconnect to host; if so, clocks on */ + if (udc->active_suspend) + disable_irq_wake(udc->udp_irq); + else { + spin_lock_irqsave(&udc->lock, flags); + pullup(udc, 1); + spin_unlock_irqrestore(&udc->lock, flags); + } + return 0; +} +#else +#define at91udc_suspend NULL +#define at91udc_resume NULL +#endif + +static struct platform_driver at91_udc_driver = { + .remove = at91udc_remove, + .shutdown = at91udc_shutdown, + .suspend = at91udc_suspend, + .resume = at91udc_resume, + .driver = { + .name = driver_name, + .of_match_table = at91_udc_dt_ids, + }, +}; + +module_platform_driver_probe(at91_udc_driver, at91udc_probe); + +MODULE_DESCRIPTION("AT91 udc driver"); +MODULE_AUTHOR("Thomas Rathbone, David Brownell"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:at91_udc"); diff --git a/drivers/usb/gadget/udc/at91_udc.h b/drivers/usb/gadget/udc/at91_udc.h new file mode 100644 index 000000000..28c1042f8 --- /dev/null +++ b/drivers/usb/gadget/udc/at91_udc.h @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2004 by Thomas Rathbone, HP Labs + * Copyright (C) 2005 by Ivan Kokshaysky + * Copyright (C) 2006 by SAN People + */ + +#ifndef AT91_UDC_H +#define AT91_UDC_H + +/* + * USB Device Port (UDP) registers. + * Based on AT91RM9200 datasheet revision E. + */ + +#define AT91_UDP_FRM_NUM 0x00 /* Frame Number Register */ +#define AT91_UDP_NUM (0x7ff << 0) /* Frame Number */ +#define AT91_UDP_FRM_ERR (1 << 16) /* Frame Error */ +#define AT91_UDP_FRM_OK (1 << 17) /* Frame OK */ + +#define AT91_UDP_GLB_STAT 0x04 /* Global State Register */ +#define AT91_UDP_FADDEN (1 << 0) /* Function Address Enable */ +#define AT91_UDP_CONFG (1 << 1) /* Configured */ +#define AT91_UDP_ESR (1 << 2) /* Enable Send Resume */ +#define AT91_UDP_RSMINPR (1 << 3) /* Resume has been sent */ +#define AT91_UDP_RMWUPE (1 << 4) /* Remote Wake Up Enable */ + +#define AT91_UDP_FADDR 0x08 /* Function Address Register */ +#define AT91_UDP_FADD (0x7f << 0) /* Function Address Value */ +#define AT91_UDP_FEN (1 << 8) /* Function Enable */ + +#define AT91_UDP_IER 0x10 /* Interrupt Enable Register */ +#define AT91_UDP_IDR 0x14 /* Interrupt Disable Register */ +#define AT91_UDP_IMR 0x18 /* Interrupt Mask Register */ + +#define AT91_UDP_ISR 0x1c /* Interrupt Status Register */ +#define AT91_UDP_EP(n) (1 << (n)) /* Endpoint Interrupt Status */ +#define AT91_UDP_RXSUSP (1 << 8) /* USB Suspend Interrupt Status */ +#define AT91_UDP_RXRSM (1 << 9) /* USB Resume Interrupt Status */ +#define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status [AT91RM9200 only] */ +#define AT91_UDP_SOFINT (1 << 11) /* Start of Frame Interrupt Status */ +#define AT91_UDP_ENDBUSRES (1 << 12) /* End of Bus Reset Interrupt Status */ +#define AT91_UDP_WAKEUP (1 << 13) /* USB Wakeup Interrupt Status [AT91RM9200 only] */ + +#define AT91_UDP_ICR 0x20 /* Interrupt Clear Register */ +#define AT91_UDP_RST_EP 0x28 /* Reset Endpoint Register */ + +#define AT91_UDP_CSR(n) (0x30+((n)*4)) /* Endpoint Control/Status Registers 0-7 */ +#define AT91_UDP_TXCOMP (1 << 0) /* Generates IN packet with data previously written in DPR */ +#define AT91_UDP_RX_DATA_BK0 (1 << 1) /* Receive Data Bank 0 */ +#define AT91_UDP_RXSETUP (1 << 2) /* Send STALL to the host */ +#define AT91_UDP_STALLSENT (1 << 3) /* Stall Sent / Isochronous error (Isochronous endpoints) */ +#define AT91_UDP_TXPKTRDY (1 << 4) /* Transmit Packet Ready */ +#define AT91_UDP_FORCESTALL (1 << 5) /* Force Stall */ +#define AT91_UDP_RX_DATA_BK1 (1 << 6) /* Receive Data Bank 1 */ +#define AT91_UDP_DIR (1 << 7) /* Transfer Direction */ +#define AT91_UDP_EPTYPE (7 << 8) /* Endpoint Type */ +#define AT91_UDP_EPTYPE_CTRL (0 << 8) +#define AT91_UDP_EPTYPE_ISO_OUT (1 << 8) +#define AT91_UDP_EPTYPE_BULK_OUT (2 << 8) +#define AT91_UDP_EPTYPE_INT_OUT (3 << 8) +#define AT91_UDP_EPTYPE_ISO_IN (5 << 8) +#define AT91_UDP_EPTYPE_BULK_IN (6 << 8) +#define AT91_UDP_EPTYPE_INT_IN (7 << 8) +#define AT91_UDP_DTGLE (1 << 11) /* Data Toggle */ +#define AT91_UDP_EPEDS (1 << 15) /* Endpoint Enable/Disable */ +#define AT91_UDP_RXBYTECNT (0x7ff << 16) /* Number of bytes in FIFO */ + +#define AT91_UDP_FDR(n) (0x50+((n)*4)) /* Endpoint FIFO Data Registers 0-7 */ + +#define AT91_UDP_TXVC 0x74 /* Transceiver Control Register */ +#define AT91_UDP_TXVC_TXVDIS (1 << 8) /* Transceiver Disable */ +#define AT91_UDP_TXVC_PUON (1 << 9) /* PullUp On [AT91SAM9260 only] */ + +/*-------------------------------------------------------------------------*/ + +/* + * controller driver data structures + */ + +#define NUM_ENDPOINTS 6 + +/* + * hardware won't disable bus reset, or resume while the controller + * is suspended ... watching suspend helps keep the logic symmetric. + */ +#define MINIMUS_INTERRUPTUS \ + (AT91_UDP_ENDBUSRES | AT91_UDP_RXRSM | AT91_UDP_RXSUSP) + +struct at91_ep { + struct usb_ep ep; + struct list_head queue; + struct at91_udc *udc; + void __iomem *creg; + + unsigned maxpacket:16; + u8 int_mask; + unsigned is_pingpong:1; + + unsigned stopped:1; + unsigned is_in:1; + unsigned is_iso:1; + unsigned fifo_bank:1; +}; + +struct at91_udc_caps { + int (*init)(struct at91_udc *udc); + void (*pullup)(struct at91_udc *udc, int is_on); +}; + +struct at91_udc_data { + struct gpio_desc *vbus_pin; /* high == host powering us */ + u8 vbus_polled; /* Use polling, not interrupt */ + struct gpio_desc *pullup_pin; /* active == D+ pulled up */ +}; + +/* + * driver is non-SMP, and just blocks IRQs whenever it needs + * access protection for chip registers or driver state + */ +struct at91_udc { + struct usb_gadget gadget; + struct at91_ep ep[NUM_ENDPOINTS]; + struct usb_gadget_driver *driver; + const struct at91_udc_caps *caps; + unsigned vbus:1; + unsigned enabled:1; + unsigned clocked:1; + unsigned suspended:1; + unsigned req_pending:1; + unsigned wait_for_addr_ack:1; + unsigned wait_for_config_ack:1; + unsigned active_suspend:1; + u8 addr; + struct at91_udc_data board; + struct clk *iclk, *fclk; + struct platform_device *pdev; + struct proc_dir_entry *pde; + void __iomem *udp_baseaddr; + int udp_irq; + spinlock_t lock; + struct timer_list vbus_timer; + struct work_struct vbus_timer_work; + struct regmap *matrix; +}; + +static inline struct at91_udc *to_udc(struct usb_gadget *g) +{ + return container_of(g, struct at91_udc, gadget); +} + +struct at91_request { + struct usb_request req; + struct list_head queue; +}; + +/*-------------------------------------------------------------------------*/ + +#ifdef VERBOSE_DEBUG +# define VDBG DBG +#else +# define VDBG(stuff...) do{}while(0) +#endif + +#ifdef PACKET_TRACE +# define PACKET VDBG +#else +# define PACKET(stuff...) do{}while(0) +#endif + +#define ERR(stuff...) pr_err("udc: " stuff) +#define WARNING(stuff...) pr_warn("udc: " stuff) +#define INFO(stuff...) pr_info("udc: " stuff) +#define DBG(stuff...) pr_debug("udc: " stuff) + +#endif + diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c new file mode 100644 index 000000000..53ca38c4b --- /dev/null +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -0,0 +1,2465 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for the Atmel USBA high speed USB device controller + * + * Copyright (C) 2005-2007 Atmel Corporation + */ +#include <linux/clk.h> +#include <linux/clk/at91_pmc.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/list.h> +#include <linux/mfd/syscon.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/ctype.h> +#include <linux/usb.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/delay.h> +#include <linux/of.h> +#include <linux/irq.h> +#include <linux/gpio/consumer.h> + +#include "atmel_usba_udc.h" +#define USBA_VBUS_IRQFLAGS (IRQF_ONESHOT \ + | IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING) + +#ifdef CONFIG_USB_GADGET_DEBUG_FS +#include <linux/debugfs.h> +#include <linux/uaccess.h> + +static int queue_dbg_open(struct inode *inode, struct file *file) +{ + struct usba_ep *ep = inode->i_private; + struct usba_request *req, *req_copy; + struct list_head *queue_data; + + queue_data = kmalloc(sizeof(*queue_data), GFP_KERNEL); + if (!queue_data) + return -ENOMEM; + INIT_LIST_HEAD(queue_data); + + spin_lock_irq(&ep->udc->lock); + list_for_each_entry(req, &ep->queue, queue) { + req_copy = kmemdup(req, sizeof(*req_copy), GFP_ATOMIC); + if (!req_copy) + goto fail; + list_add_tail(&req_copy->queue, queue_data); + } + spin_unlock_irq(&ep->udc->lock); + + file->private_data = queue_data; + return 0; + +fail: + spin_unlock_irq(&ep->udc->lock); + list_for_each_entry_safe(req, req_copy, queue_data, queue) { + list_del(&req->queue); + kfree(req); + } + kfree(queue_data); + return -ENOMEM; +} + +/* + * bbbbbbbb llllllll IZS sssss nnnn FDL\n\0 + * + * b: buffer address + * l: buffer length + * I/i: interrupt/no interrupt + * Z/z: zero/no zero + * S/s: short ok/short not ok + * s: status + * n: nr_packets + * F/f: submitted/not submitted to FIFO + * D/d: using/not using DMA + * L/l: last transaction/not last transaction + */ +static ssize_t queue_dbg_read(struct file *file, char __user *buf, + size_t nbytes, loff_t *ppos) +{ + struct list_head *queue = file->private_data; + struct usba_request *req, *tmp_req; + size_t len, remaining, actual = 0; + char tmpbuf[38]; + + if (!access_ok(buf, nbytes)) + return -EFAULT; + + inode_lock(file_inode(file)); + list_for_each_entry_safe(req, tmp_req, queue, queue) { + len = snprintf(tmpbuf, sizeof(tmpbuf), + "%8p %08x %c%c%c %5d %c%c%c\n", + req->req.buf, req->req.length, + req->req.no_interrupt ? 'i' : 'I', + req->req.zero ? 'Z' : 'z', + req->req.short_not_ok ? 's' : 'S', + req->req.status, + req->submitted ? 'F' : 'f', + req->using_dma ? 'D' : 'd', + req->last_transaction ? 'L' : 'l'); + len = min(len, sizeof(tmpbuf)); + if (len > nbytes) + break; + + list_del(&req->queue); + kfree(req); + + remaining = __copy_to_user(buf, tmpbuf, len); + actual += len - remaining; + if (remaining) + break; + + nbytes -= len; + buf += len; + } + inode_unlock(file_inode(file)); + + return actual; +} + +static int queue_dbg_release(struct inode *inode, struct file *file) +{ + struct list_head *queue_data = file->private_data; + struct usba_request *req, *tmp_req; + + list_for_each_entry_safe(req, tmp_req, queue_data, queue) { + list_del(&req->queue); + kfree(req); + } + kfree(queue_data); + return 0; +} + +static int regs_dbg_open(struct inode *inode, struct file *file) +{ + struct usba_udc *udc; + unsigned int i; + u32 *data; + int ret = -ENOMEM; + + inode_lock(inode); + udc = inode->i_private; + data = kmalloc(inode->i_size, GFP_KERNEL); + if (!data) + goto out; + + spin_lock_irq(&udc->lock); + for (i = 0; i < inode->i_size / 4; i++) + data[i] = readl_relaxed(udc->regs + i * 4); + spin_unlock_irq(&udc->lock); + + file->private_data = data; + ret = 0; + +out: + inode_unlock(inode); + + return ret; +} + +static ssize_t regs_dbg_read(struct file *file, char __user *buf, + size_t nbytes, loff_t *ppos) +{ + struct inode *inode = file_inode(file); + int ret; + + inode_lock(inode); + ret = simple_read_from_buffer(buf, nbytes, ppos, + file->private_data, + file_inode(file)->i_size); + inode_unlock(inode); + + return ret; +} + +static int regs_dbg_release(struct inode *inode, struct file *file) +{ + kfree(file->private_data); + return 0; +} + +static const struct file_operations queue_dbg_fops = { + .owner = THIS_MODULE, + .open = queue_dbg_open, + .llseek = no_llseek, + .read = queue_dbg_read, + .release = queue_dbg_release, +}; + +static const struct file_operations regs_dbg_fops = { + .owner = THIS_MODULE, + .open = regs_dbg_open, + .llseek = generic_file_llseek, + .read = regs_dbg_read, + .release = regs_dbg_release, +}; + +static void usba_ep_init_debugfs(struct usba_udc *udc, + struct usba_ep *ep) +{ + struct dentry *ep_root; + + ep_root = debugfs_create_dir(ep->ep.name, udc->debugfs_root); + ep->debugfs_dir = ep_root; + + debugfs_create_file("queue", 0400, ep_root, ep, &queue_dbg_fops); + if (ep->can_dma) + debugfs_create_u32("dma_status", 0400, ep_root, + &ep->last_dma_status); + if (ep_is_control(ep)) + debugfs_create_u32("state", 0400, ep_root, &ep->state); +} + +static void usba_ep_cleanup_debugfs(struct usba_ep *ep) +{ + debugfs_remove_recursive(ep->debugfs_dir); +} + +static void usba_init_debugfs(struct usba_udc *udc) +{ + struct dentry *root; + struct resource *regs_resource; + + root = debugfs_create_dir(udc->gadget.name, usb_debug_root); + udc->debugfs_root = root; + + regs_resource = platform_get_resource(udc->pdev, IORESOURCE_MEM, + CTRL_IOMEM_ID); + + if (regs_resource) { + debugfs_create_file_size("regs", 0400, root, udc, + ®s_dbg_fops, + resource_size(regs_resource)); + } + + usba_ep_init_debugfs(udc, to_usba_ep(udc->gadget.ep0)); +} + +static void usba_cleanup_debugfs(struct usba_udc *udc) +{ + usba_ep_cleanup_debugfs(to_usba_ep(udc->gadget.ep0)); + debugfs_remove_recursive(udc->debugfs_root); +} +#else +static inline void usba_ep_init_debugfs(struct usba_udc *udc, + struct usba_ep *ep) +{ + +} + +static inline void usba_ep_cleanup_debugfs(struct usba_ep *ep) +{ + +} + +static inline void usba_init_debugfs(struct usba_udc *udc) +{ + +} + +static inline void usba_cleanup_debugfs(struct usba_udc *udc) +{ + +} +#endif + +static ushort fifo_mode; + +module_param(fifo_mode, ushort, 0x0); +MODULE_PARM_DESC(fifo_mode, "Endpoint configuration mode"); + +/* mode 0 - uses autoconfig */ + +/* mode 1 - fits in 8KB, generic max fifo configuration */ +static struct usba_fifo_cfg mode_1_cfg[] = { +{ .hw_ep_num = 0, .fifo_size = 64, .nr_banks = 1, }, +{ .hw_ep_num = 1, .fifo_size = 1024, .nr_banks = 2, }, +{ .hw_ep_num = 2, .fifo_size = 1024, .nr_banks = 1, }, +{ .hw_ep_num = 3, .fifo_size = 1024, .nr_banks = 1, }, +{ .hw_ep_num = 4, .fifo_size = 1024, .nr_banks = 1, }, +{ .hw_ep_num = 5, .fifo_size = 1024, .nr_banks = 1, }, +{ .hw_ep_num = 6, .fifo_size = 1024, .nr_banks = 1, }, +}; + +/* mode 2 - fits in 8KB, performance max fifo configuration */ +static struct usba_fifo_cfg mode_2_cfg[] = { +{ .hw_ep_num = 0, .fifo_size = 64, .nr_banks = 1, }, +{ .hw_ep_num = 1, .fifo_size = 1024, .nr_banks = 3, }, +{ .hw_ep_num = 2, .fifo_size = 1024, .nr_banks = 2, }, +{ .hw_ep_num = 3, .fifo_size = 1024, .nr_banks = 2, }, +}; + +/* mode 3 - fits in 8KB, mixed fifo configuration */ +static struct usba_fifo_cfg mode_3_cfg[] = { +{ .hw_ep_num = 0, .fifo_size = 64, .nr_banks = 1, }, +{ .hw_ep_num = 1, .fifo_size = 1024, .nr_banks = 2, }, +{ .hw_ep_num = 2, .fifo_size = 512, .nr_banks = 2, }, +{ .hw_ep_num = 3, .fifo_size = 512, .nr_banks = 2, }, +{ .hw_ep_num = 4, .fifo_size = 512, .nr_banks = 2, }, +{ .hw_ep_num = 5, .fifo_size = 512, .nr_banks = 2, }, +{ .hw_ep_num = 6, .fifo_size = 512, .nr_banks = 2, }, +}; + +/* mode 4 - fits in 8KB, custom fifo configuration */ +static struct usba_fifo_cfg mode_4_cfg[] = { +{ .hw_ep_num = 0, .fifo_size = 64, .nr_banks = 1, }, +{ .hw_ep_num = 1, .fifo_size = 512, .nr_banks = 2, }, +{ .hw_ep_num = 2, .fifo_size = 512, .nr_banks = 2, }, +{ .hw_ep_num = 3, .fifo_size = 8, .nr_banks = 2, }, +{ .hw_ep_num = 4, .fifo_size = 512, .nr_banks = 2, }, +{ .hw_ep_num = 5, .fifo_size = 512, .nr_banks = 2, }, +{ .hw_ep_num = 6, .fifo_size = 16, .nr_banks = 2, }, +{ .hw_ep_num = 7, .fifo_size = 8, .nr_banks = 2, }, +{ .hw_ep_num = 8, .fifo_size = 8, .nr_banks = 2, }, +}; +/* Add additional configurations here */ + +static int usba_config_fifo_table(struct usba_udc *udc) +{ + int n; + + switch (fifo_mode) { + default: + fifo_mode = 0; + fallthrough; + case 0: + udc->fifo_cfg = NULL; + n = 0; + break; + case 1: + udc->fifo_cfg = mode_1_cfg; + n = ARRAY_SIZE(mode_1_cfg); + break; + case 2: + udc->fifo_cfg = mode_2_cfg; + n = ARRAY_SIZE(mode_2_cfg); + break; + case 3: + udc->fifo_cfg = mode_3_cfg; + n = ARRAY_SIZE(mode_3_cfg); + break; + case 4: + udc->fifo_cfg = mode_4_cfg; + n = ARRAY_SIZE(mode_4_cfg); + break; + } + DBG(DBG_HW, "Setup fifo_mode %d\n", fifo_mode); + + return n; +} + +static inline u32 usba_int_enb_get(struct usba_udc *udc) +{ + return udc->int_enb_cache; +} + +static inline void usba_int_enb_set(struct usba_udc *udc, u32 mask) +{ + u32 val; + + val = udc->int_enb_cache | mask; + usba_writel(udc, INT_ENB, val); + udc->int_enb_cache = val; +} + +static inline void usba_int_enb_clear(struct usba_udc *udc, u32 mask) +{ + u32 val; + + val = udc->int_enb_cache & ~mask; + usba_writel(udc, INT_ENB, val); + udc->int_enb_cache = val; +} + +static int vbus_is_present(struct usba_udc *udc) +{ + if (udc->vbus_pin) + return gpiod_get_value(udc->vbus_pin); + + /* No Vbus detection: Assume always present */ + return 1; +} + +static void toggle_bias(struct usba_udc *udc, int is_on) +{ + if (udc->errata && udc->errata->toggle_bias) + udc->errata->toggle_bias(udc, is_on); +} + +static void generate_bias_pulse(struct usba_udc *udc) +{ + if (!udc->bias_pulse_needed) + return; + + if (udc->errata && udc->errata->pulse_bias) + udc->errata->pulse_bias(udc); + + udc->bias_pulse_needed = false; +} + +static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req) +{ + unsigned int transaction_len; + + transaction_len = req->req.length - req->req.actual; + req->last_transaction = 1; + if (transaction_len > ep->ep.maxpacket) { + transaction_len = ep->ep.maxpacket; + req->last_transaction = 0; + } else if (transaction_len == ep->ep.maxpacket && req->req.zero) + req->last_transaction = 0; + + DBG(DBG_QUEUE, "%s: submit_transaction, req %p (length %d)%s\n", + ep->ep.name, req, transaction_len, + req->last_transaction ? ", done" : ""); + + memcpy_toio(ep->fifo, req->req.buf + req->req.actual, transaction_len); + usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); + req->req.actual += transaction_len; +} + +static void submit_request(struct usba_ep *ep, struct usba_request *req) +{ + DBG(DBG_QUEUE, "%s: submit_request: req %p (length %d)\n", + ep->ep.name, req, req->req.length); + + req->req.actual = 0; + req->submitted = 1; + + if (req->using_dma) { + if (req->req.length == 0) { + usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY); + return; + } + + if (req->req.zero) + usba_ep_writel(ep, CTL_ENB, USBA_SHORT_PACKET); + else + usba_ep_writel(ep, CTL_DIS, USBA_SHORT_PACKET); + + usba_dma_writel(ep, ADDRESS, req->req.dma); + usba_dma_writel(ep, CONTROL, req->ctrl); + } else { + next_fifo_transaction(ep, req); + if (req->last_transaction) { + usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY); + if (ep_is_control(ep)) + usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE); + } else { + if (ep_is_control(ep)) + usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE); + usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY); + } + } +} + +static void submit_next_request(struct usba_ep *ep) +{ + struct usba_request *req; + + if (list_empty(&ep->queue)) { + usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY | USBA_RX_BK_RDY); + return; + } + + req = list_entry(ep->queue.next, struct usba_request, queue); + if (!req->submitted) + submit_request(ep, req); +} + +static void send_status(struct usba_udc *udc, struct usba_ep *ep) +{ + ep->state = STATUS_STAGE_IN; + usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); + usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE); +} + +static void receive_data(struct usba_ep *ep) +{ + struct usba_udc *udc = ep->udc; + struct usba_request *req; + unsigned long status; + unsigned int bytecount, nr_busy; + int is_complete = 0; + + status = usba_ep_readl(ep, STA); + nr_busy = USBA_BFEXT(BUSY_BANKS, status); + + DBG(DBG_QUEUE, "receive data: nr_busy=%u\n", nr_busy); + + while (nr_busy > 0) { + if (list_empty(&ep->queue)) { + usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY); + break; + } + req = list_entry(ep->queue.next, + struct usba_request, queue); + + bytecount = USBA_BFEXT(BYTE_COUNT, status); + + if (status & (1 << 31)) + is_complete = 1; + if (req->req.actual + bytecount >= req->req.length) { + is_complete = 1; + bytecount = req->req.length - req->req.actual; + } + + memcpy_fromio(req->req.buf + req->req.actual, + ep->fifo, bytecount); + req->req.actual += bytecount; + + usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY); + + if (is_complete) { + DBG(DBG_QUEUE, "%s: request done\n", ep->ep.name); + req->req.status = 0; + list_del_init(&req->queue); + usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY); + spin_unlock(&udc->lock); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&udc->lock); + } + + status = usba_ep_readl(ep, STA); + nr_busy = USBA_BFEXT(BUSY_BANKS, status); + + if (is_complete && ep_is_control(ep)) { + send_status(udc, ep); + break; + } + } +} + +static void +request_complete(struct usba_ep *ep, struct usba_request *req, int status) +{ + struct usba_udc *udc = ep->udc; + + WARN_ON(!list_empty(&req->queue)); + + if (req->req.status == -EINPROGRESS) + req->req.status = status; + + if (req->using_dma) + usb_gadget_unmap_request(&udc->gadget, &req->req, ep->is_in); + + DBG(DBG_GADGET | DBG_REQ, + "%s: req %p complete: status %d, actual %u\n", + ep->ep.name, req, req->req.status, req->req.actual); + + spin_unlock(&udc->lock); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&udc->lock); +} + +static void +request_complete_list(struct usba_ep *ep, struct list_head *list, int status) +{ + struct usba_request *req, *tmp_req; + + list_for_each_entry_safe(req, tmp_req, list, queue) { + list_del_init(&req->queue); + request_complete(ep, req, status); + } +} + +static int +usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) +{ + struct usba_ep *ep = to_usba_ep(_ep); + struct usba_udc *udc = ep->udc; + unsigned long flags, maxpacket; + unsigned int nr_trans; + + DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep->ep.name, desc); + + maxpacket = usb_endpoint_maxp(desc); + + if (((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != ep->index) + || ep->index == 0 + || desc->bDescriptorType != USB_DT_ENDPOINT + || maxpacket == 0 + || maxpacket > ep->fifo_size) { + DBG(DBG_ERR, "ep_enable: Invalid argument"); + return -EINVAL; + } + + ep->is_isoc = 0; + ep->is_in = 0; + + DBG(DBG_ERR, "%s: EPT_CFG = 0x%lx (maxpacket = %lu)\n", + ep->ep.name, ep->ept_cfg, maxpacket); + + if (usb_endpoint_dir_in(desc)) { + ep->is_in = 1; + ep->ept_cfg |= USBA_EPT_DIR_IN; + } + + switch (usb_endpoint_type(desc)) { + case USB_ENDPOINT_XFER_CONTROL: + ep->ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL); + break; + case USB_ENDPOINT_XFER_ISOC: + if (!ep->can_isoc) { + DBG(DBG_ERR, "ep_enable: %s is not isoc capable\n", + ep->ep.name); + return -EINVAL; + } + + /* + * Bits 11:12 specify number of _additional_ + * transactions per microframe. + */ + nr_trans = usb_endpoint_maxp_mult(desc); + if (nr_trans > 3) + return -EINVAL; + + ep->is_isoc = 1; + ep->ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_ISO); + ep->ept_cfg |= USBA_BF(NB_TRANS, nr_trans); + + break; + case USB_ENDPOINT_XFER_BULK: + ep->ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK); + break; + case USB_ENDPOINT_XFER_INT: + ep->ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_INT); + break; + } + + spin_lock_irqsave(&ep->udc->lock, flags); + + ep->ep.desc = desc; + ep->ep.maxpacket = maxpacket; + + usba_ep_writel(ep, CFG, ep->ept_cfg); + usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE); + + if (ep->can_dma) { + u32 ctrl; + + usba_int_enb_set(udc, USBA_BF(EPT_INT, 1 << ep->index) | + USBA_BF(DMA_INT, 1 << ep->index)); + ctrl = USBA_AUTO_VALID | USBA_INTDIS_DMA; + usba_ep_writel(ep, CTL_ENB, ctrl); + } else { + usba_int_enb_set(udc, USBA_BF(EPT_INT, 1 << ep->index)); + } + + spin_unlock_irqrestore(&udc->lock, flags); + + DBG(DBG_HW, "EPT_CFG%d after init: %#08lx\n", ep->index, + (unsigned long)usba_ep_readl(ep, CFG)); + DBG(DBG_HW, "INT_ENB after init: %#08lx\n", + (unsigned long)usba_int_enb_get(udc)); + + return 0; +} + +static int usba_ep_disable(struct usb_ep *_ep) +{ + struct usba_ep *ep = to_usba_ep(_ep); + struct usba_udc *udc = ep->udc; + LIST_HEAD(req_list); + unsigned long flags; + + DBG(DBG_GADGET, "ep_disable: %s\n", ep->ep.name); + + spin_lock_irqsave(&udc->lock, flags); + + if (!ep->ep.desc) { + spin_unlock_irqrestore(&udc->lock, flags); + DBG(DBG_ERR, "ep_disable: %s not enabled\n", ep->ep.name); + return -EINVAL; + } + ep->ep.desc = NULL; + + list_splice_init(&ep->queue, &req_list); + if (ep->can_dma) { + usba_dma_writel(ep, CONTROL, 0); + usba_dma_writel(ep, ADDRESS, 0); + usba_dma_readl(ep, STATUS); + } + usba_ep_writel(ep, CTL_DIS, USBA_EPT_ENABLE); + usba_int_enb_clear(udc, USBA_BF(EPT_INT, 1 << ep->index)); + + request_complete_list(ep, &req_list, -ESHUTDOWN); + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static struct usb_request * +usba_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) +{ + struct usba_request *req; + + DBG(DBG_GADGET, "ep_alloc_request: %p, 0x%x\n", _ep, gfp_flags); + + req = kzalloc(sizeof(*req), gfp_flags); + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->queue); + + return &req->req; +} + +static void +usba_ep_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct usba_request *req = to_usba_req(_req); + + DBG(DBG_GADGET, "ep_free_request: %p, %p\n", _ep, _req); + + kfree(req); +} + +static int queue_dma(struct usba_udc *udc, struct usba_ep *ep, + struct usba_request *req, gfp_t gfp_flags) +{ + unsigned long flags; + int ret; + + DBG(DBG_DMA, "%s: req l/%u d/%pad %c%c%c\n", + ep->ep.name, req->req.length, &req->req.dma, + req->req.zero ? 'Z' : 'z', + req->req.short_not_ok ? 'S' : 's', + req->req.no_interrupt ? 'I' : 'i'); + + if (req->req.length > 0x10000) { + /* Lengths from 0 to 65536 (inclusive) are supported */ + DBG(DBG_ERR, "invalid request length %u\n", req->req.length); + return -EINVAL; + } + + ret = usb_gadget_map_request(&udc->gadget, &req->req, ep->is_in); + if (ret) + return ret; + + req->using_dma = 1; + req->ctrl = USBA_BF(DMA_BUF_LEN, req->req.length) + | USBA_DMA_CH_EN | USBA_DMA_END_BUF_IE + | USBA_DMA_END_BUF_EN; + + if (!ep->is_in) + req->ctrl |= USBA_DMA_END_TR_EN | USBA_DMA_END_TR_IE; + + /* + * Add this request to the queue and submit for DMA if + * possible. Check if we're still alive first -- we may have + * received a reset since last time we checked. + */ + ret = -ESHUTDOWN; + spin_lock_irqsave(&udc->lock, flags); + if (ep->ep.desc) { + if (list_empty(&ep->queue)) + submit_request(ep, req); + + list_add_tail(&req->queue, &ep->queue); + ret = 0; + } + spin_unlock_irqrestore(&udc->lock, flags); + + return ret; +} + +static int +usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) +{ + struct usba_request *req = to_usba_req(_req); + struct usba_ep *ep = to_usba_ep(_ep); + struct usba_udc *udc = ep->udc; + unsigned long flags; + int ret; + + DBG(DBG_GADGET | DBG_QUEUE | DBG_REQ, "%s: queue req %p, len %u\n", + ep->ep.name, req, _req->length); + + if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN || + !ep->ep.desc) + return -ESHUTDOWN; + + req->submitted = 0; + req->using_dma = 0; + req->last_transaction = 0; + + _req->status = -EINPROGRESS; + _req->actual = 0; + + if (ep->can_dma) + return queue_dma(udc, ep, req, gfp_flags); + + /* May have received a reset since last time we checked */ + ret = -ESHUTDOWN; + spin_lock_irqsave(&udc->lock, flags); + if (ep->ep.desc) { + list_add_tail(&req->queue, &ep->queue); + + if ((!ep_is_control(ep) && ep->is_in) || + (ep_is_control(ep) + && (ep->state == DATA_STAGE_IN + || ep->state == STATUS_STAGE_IN))) + usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY); + else + usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY); + ret = 0; + } + spin_unlock_irqrestore(&udc->lock, flags); + + return ret; +} + +static void +usba_update_req(struct usba_ep *ep, struct usba_request *req, u32 status) +{ + req->req.actual = req->req.length - USBA_BFEXT(DMA_BUF_LEN, status); +} + +static int stop_dma(struct usba_ep *ep, u32 *pstatus) +{ + unsigned int timeout; + u32 status; + + /* + * Stop the DMA controller. When writing both CH_EN + * and LINK to 0, the other bits are not affected. + */ + usba_dma_writel(ep, CONTROL, 0); + + /* Wait for the FIFO to empty */ + for (timeout = 40; timeout; --timeout) { + status = usba_dma_readl(ep, STATUS); + if (!(status & USBA_DMA_CH_EN)) + break; + udelay(1); + } + + if (pstatus) + *pstatus = status; + + if (timeout == 0) { + dev_err(&ep->udc->pdev->dev, + "%s: timed out waiting for DMA FIFO to empty\n", + ep->ep.name); + return -ETIMEDOUT; + } + + return 0; +} + +static int usba_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct usba_ep *ep = to_usba_ep(_ep); + struct usba_udc *udc = ep->udc; + struct usba_request *req = NULL; + struct usba_request *iter; + unsigned long flags; + u32 status; + + DBG(DBG_GADGET | DBG_QUEUE, "ep_dequeue: %s, req %p\n", + ep->ep.name, _req); + + spin_lock_irqsave(&udc->lock, flags); + + list_for_each_entry(iter, &ep->queue, queue) { + if (&iter->req != _req) + continue; + req = iter; + break; + } + + if (!req) { + spin_unlock_irqrestore(&udc->lock, flags); + return -EINVAL; + } + + if (req->using_dma) { + /* + * If this request is currently being transferred, + * stop the DMA controller and reset the FIFO. + */ + if (ep->queue.next == &req->queue) { + status = usba_dma_readl(ep, STATUS); + if (status & USBA_DMA_CH_EN) + stop_dma(ep, &status); + +#ifdef CONFIG_USB_GADGET_DEBUG_FS + ep->last_dma_status = status; +#endif + + usba_writel(udc, EPT_RST, 1 << ep->index); + + usba_update_req(ep, req, status); + } + } + + /* + * Errors should stop the queue from advancing until the + * completion function returns. + */ + list_del_init(&req->queue); + + request_complete(ep, req, -ECONNRESET); + + /* Process the next request if any */ + submit_next_request(ep); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static int usba_ep_set_halt(struct usb_ep *_ep, int value) +{ + struct usba_ep *ep = to_usba_ep(_ep); + struct usba_udc *udc = ep->udc; + unsigned long flags; + int ret = 0; + + DBG(DBG_GADGET, "endpoint %s: %s HALT\n", ep->ep.name, + value ? "set" : "clear"); + + if (!ep->ep.desc) { + DBG(DBG_ERR, "Attempted to halt uninitialized ep %s\n", + ep->ep.name); + return -ENODEV; + } + if (ep->is_isoc) { + DBG(DBG_ERR, "Attempted to halt isochronous ep %s\n", + ep->ep.name); + return -ENOTTY; + } + + spin_lock_irqsave(&udc->lock, flags); + + /* + * We can't halt IN endpoints while there are still data to be + * transferred + */ + if (!list_empty(&ep->queue) + || ((value && ep->is_in && (usba_ep_readl(ep, STA) + & USBA_BF(BUSY_BANKS, -1L))))) { + ret = -EAGAIN; + } else { + if (value) + usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL); + else + usba_ep_writel(ep, CLR_STA, + USBA_FORCE_STALL | USBA_TOGGLE_CLR); + usba_ep_readl(ep, STA); + } + + spin_unlock_irqrestore(&udc->lock, flags); + + return ret; +} + +static int usba_ep_fifo_status(struct usb_ep *_ep) +{ + struct usba_ep *ep = to_usba_ep(_ep); + + return USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA)); +} + +static void usba_ep_fifo_flush(struct usb_ep *_ep) +{ + struct usba_ep *ep = to_usba_ep(_ep); + struct usba_udc *udc = ep->udc; + + usba_writel(udc, EPT_RST, 1 << ep->index); +} + +static const struct usb_ep_ops usba_ep_ops = { + .enable = usba_ep_enable, + .disable = usba_ep_disable, + .alloc_request = usba_ep_alloc_request, + .free_request = usba_ep_free_request, + .queue = usba_ep_queue, + .dequeue = usba_ep_dequeue, + .set_halt = usba_ep_set_halt, + .fifo_status = usba_ep_fifo_status, + .fifo_flush = usba_ep_fifo_flush, +}; + +static int usba_udc_get_frame(struct usb_gadget *gadget) +{ + struct usba_udc *udc = to_usba_udc(gadget); + + return USBA_BFEXT(FRAME_NUMBER, usba_readl(udc, FNUM)); +} + +static int usba_udc_wakeup(struct usb_gadget *gadget) +{ + struct usba_udc *udc = to_usba_udc(gadget); + unsigned long flags; + u32 ctrl; + int ret = -EINVAL; + + spin_lock_irqsave(&udc->lock, flags); + if (udc->devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) { + ctrl = usba_readl(udc, CTRL); + usba_writel(udc, CTRL, ctrl | USBA_REMOTE_WAKE_UP); + ret = 0; + } + spin_unlock_irqrestore(&udc->lock, flags); + + return ret; +} + +static int +usba_udc_set_selfpowered(struct usb_gadget *gadget, int is_selfpowered) +{ + struct usba_udc *udc = to_usba_udc(gadget); + unsigned long flags; + + gadget->is_selfpowered = (is_selfpowered != 0); + spin_lock_irqsave(&udc->lock, flags); + if (is_selfpowered) + udc->devstatus |= 1 << USB_DEVICE_SELF_POWERED; + else + udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static int atmel_usba_pullup(struct usb_gadget *gadget, int is_on); +static int atmel_usba_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver); +static int atmel_usba_stop(struct usb_gadget *gadget); + +static struct usb_ep *atmel_usba_match_ep(struct usb_gadget *gadget, + struct usb_endpoint_descriptor *desc, + struct usb_ss_ep_comp_descriptor *ep_comp) +{ + struct usb_ep *_ep; + struct usba_ep *ep; + + /* Look at endpoints until an unclaimed one looks usable */ + list_for_each_entry(_ep, &gadget->ep_list, ep_list) { + if (usb_gadget_ep_match_desc(gadget, _ep, desc, ep_comp)) + goto found_ep; + } + /* Fail */ + return NULL; + +found_ep: + + if (fifo_mode == 0) { + /* Optimize hw fifo size based on ep type and other info */ + ep = to_usba_ep(_ep); + + switch (usb_endpoint_type(desc)) { + case USB_ENDPOINT_XFER_CONTROL: + ep->nr_banks = 1; + break; + + case USB_ENDPOINT_XFER_ISOC: + ep->fifo_size = 1024; + if (ep->udc->ep_prealloc) + ep->nr_banks = 2; + break; + + case USB_ENDPOINT_XFER_BULK: + ep->fifo_size = 512; + if (ep->udc->ep_prealloc) + ep->nr_banks = 1; + break; + + case USB_ENDPOINT_XFER_INT: + if (desc->wMaxPacketSize == 0) + ep->fifo_size = + roundup_pow_of_two(_ep->maxpacket_limit); + else + ep->fifo_size = + roundup_pow_of_two(le16_to_cpu(desc->wMaxPacketSize)); + if (ep->udc->ep_prealloc) + ep->nr_banks = 1; + break; + } + + /* It might be a little bit late to set this */ + usb_ep_set_maxpacket_limit(&ep->ep, ep->fifo_size); + + /* Generate ept_cfg basd on FIFO size and number of banks */ + if (ep->fifo_size <= 8) + ep->ept_cfg = USBA_BF(EPT_SIZE, USBA_EPT_SIZE_8); + else + /* LSB is bit 1, not 0 */ + ep->ept_cfg = + USBA_BF(EPT_SIZE, fls(ep->fifo_size - 1) - 3); + + ep->ept_cfg |= USBA_BF(BK_NUMBER, ep->nr_banks); + } + + return _ep; +} + +static const struct usb_gadget_ops usba_udc_ops = { + .get_frame = usba_udc_get_frame, + .wakeup = usba_udc_wakeup, + .set_selfpowered = usba_udc_set_selfpowered, + .pullup = atmel_usba_pullup, + .udc_start = atmel_usba_start, + .udc_stop = atmel_usba_stop, + .match_ep = atmel_usba_match_ep, +}; + +static struct usb_endpoint_descriptor usba_ep0_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 0, + .bmAttributes = USB_ENDPOINT_XFER_CONTROL, + .wMaxPacketSize = cpu_to_le16(64), + /* FIXME: I have no idea what to put here */ + .bInterval = 1, +}; + +static const struct usb_gadget usba_gadget_template = { + .ops = &usba_udc_ops, + .max_speed = USB_SPEED_HIGH, + .name = "atmel_usba_udc", +}; + +/* + * Called with interrupts disabled and udc->lock held. + */ +static void reset_all_endpoints(struct usba_udc *udc) +{ + struct usba_ep *ep; + struct usba_request *req, *tmp_req; + + usba_writel(udc, EPT_RST, ~0UL); + + ep = to_usba_ep(udc->gadget.ep0); + list_for_each_entry_safe(req, tmp_req, &ep->queue, queue) { + list_del_init(&req->queue); + request_complete(ep, req, -ECONNRESET); + } +} + +static struct usba_ep *get_ep_by_addr(struct usba_udc *udc, u16 wIndex) +{ + struct usba_ep *ep; + + if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0) + return to_usba_ep(udc->gadget.ep0); + + list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) { + u8 bEndpointAddress; + + if (!ep->ep.desc) + continue; + bEndpointAddress = ep->ep.desc->bEndpointAddress; + if ((wIndex ^ bEndpointAddress) & USB_DIR_IN) + continue; + if ((bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) + == (wIndex & USB_ENDPOINT_NUMBER_MASK)) + return ep; + } + + return NULL; +} + +/* Called with interrupts disabled and udc->lock held */ +static inline void set_protocol_stall(struct usba_udc *udc, struct usba_ep *ep) +{ + usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL); + ep->state = WAIT_FOR_SETUP; +} + +static inline int is_stalled(struct usba_udc *udc, struct usba_ep *ep) +{ + if (usba_ep_readl(ep, STA) & USBA_FORCE_STALL) + return 1; + return 0; +} + +static inline void set_address(struct usba_udc *udc, unsigned int addr) +{ + u32 regval; + + DBG(DBG_BUS, "setting address %u...\n", addr); + regval = usba_readl(udc, CTRL); + regval = USBA_BFINS(DEV_ADDR, addr, regval); + usba_writel(udc, CTRL, regval); +} + +static int do_test_mode(struct usba_udc *udc) +{ + static const char test_packet_buffer[] = { + /* JKJKJKJK * 9 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* JJKKJJKK * 8 */ + 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, + /* JJKKJJKK * 8 */ + 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, + /* JJJJJJJKKKKKKK * 8 */ + 0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + /* JJJJJJJK * 8 */ + 0x7F, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, + /* {JKKKKKKK * 10}, JK */ + 0xFC, 0x7E, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, 0x7E + }; + struct usba_ep *ep; + struct device *dev = &udc->pdev->dev; + int test_mode; + + test_mode = udc->test_mode; + + /* Start from a clean slate */ + reset_all_endpoints(udc); + + switch (test_mode) { + case 0x0100: + /* Test_J */ + usba_writel(udc, TST, USBA_TST_J_MODE); + dev_info(dev, "Entering Test_J mode...\n"); + break; + case 0x0200: + /* Test_K */ + usba_writel(udc, TST, USBA_TST_K_MODE); + dev_info(dev, "Entering Test_K mode...\n"); + break; + case 0x0300: + /* + * Test_SE0_NAK: Force high-speed mode and set up ep0 + * for Bulk IN transfers + */ + ep = &udc->usba_ep[0]; + usba_writel(udc, TST, + USBA_BF(SPEED_CFG, USBA_SPEED_CFG_FORCE_HIGH)); + usba_ep_writel(ep, CFG, + USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64) + | USBA_EPT_DIR_IN + | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK) + | USBA_BF(BK_NUMBER, 1)); + if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) { + set_protocol_stall(udc, ep); + dev_err(dev, "Test_SE0_NAK: ep0 not mapped\n"); + } else { + usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE); + dev_info(dev, "Entering Test_SE0_NAK mode...\n"); + } + break; + case 0x0400: + /* Test_Packet */ + ep = &udc->usba_ep[0]; + usba_ep_writel(ep, CFG, + USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64) + | USBA_EPT_DIR_IN + | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK) + | USBA_BF(BK_NUMBER, 1)); + if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) { + set_protocol_stall(udc, ep); + dev_err(dev, "Test_Packet: ep0 not mapped\n"); + } else { + usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE); + usba_writel(udc, TST, USBA_TST_PKT_MODE); + memcpy_toio(ep->fifo, test_packet_buffer, + sizeof(test_packet_buffer)); + usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); + dev_info(dev, "Entering Test_Packet mode...\n"); + } + break; + default: + dev_err(dev, "Invalid test mode: 0x%04x\n", test_mode); + return -EINVAL; + } + + return 0; +} + +/* Avoid overly long expressions */ +static inline bool feature_is_dev_remote_wakeup(struct usb_ctrlrequest *crq) +{ + if (crq->wValue == cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP)) + return true; + return false; +} + +static inline bool feature_is_dev_test_mode(struct usb_ctrlrequest *crq) +{ + if (crq->wValue == cpu_to_le16(USB_DEVICE_TEST_MODE)) + return true; + return false; +} + +static inline bool feature_is_ep_halt(struct usb_ctrlrequest *crq) +{ + if (crq->wValue == cpu_to_le16(USB_ENDPOINT_HALT)) + return true; + return false; +} + +static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep, + struct usb_ctrlrequest *crq) +{ + int retval = 0; + + switch (crq->bRequest) { + case USB_REQ_GET_STATUS: { + u16 status; + + if (crq->bRequestType == (USB_DIR_IN | USB_RECIP_DEVICE)) { + status = cpu_to_le16(udc->devstatus); + } else if (crq->bRequestType + == (USB_DIR_IN | USB_RECIP_INTERFACE)) { + status = cpu_to_le16(0); + } else if (crq->bRequestType + == (USB_DIR_IN | USB_RECIP_ENDPOINT)) { + struct usba_ep *target; + + target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex)); + if (!target) + goto stall; + + status = 0; + if (is_stalled(udc, target)) + status |= cpu_to_le16(1); + } else + goto delegate; + + /* Write directly to the FIFO. No queueing is done. */ + if (crq->wLength != cpu_to_le16(sizeof(status))) + goto stall; + ep->state = DATA_STAGE_IN; + writew_relaxed(status, ep->fifo); + usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); + break; + } + + case USB_REQ_CLEAR_FEATURE: { + if (crq->bRequestType == USB_RECIP_DEVICE) { + if (feature_is_dev_remote_wakeup(crq)) + udc->devstatus + &= ~(1 << USB_DEVICE_REMOTE_WAKEUP); + else + /* Can't CLEAR_FEATURE TEST_MODE */ + goto stall; + } else if (crq->bRequestType == USB_RECIP_ENDPOINT) { + struct usba_ep *target; + + if (crq->wLength != cpu_to_le16(0) + || !feature_is_ep_halt(crq)) + goto stall; + target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex)); + if (!target) + goto stall; + + usba_ep_writel(target, CLR_STA, USBA_FORCE_STALL); + if (target->index != 0) + usba_ep_writel(target, CLR_STA, + USBA_TOGGLE_CLR); + } else { + goto delegate; + } + + send_status(udc, ep); + break; + } + + case USB_REQ_SET_FEATURE: { + if (crq->bRequestType == USB_RECIP_DEVICE) { + if (feature_is_dev_test_mode(crq)) { + send_status(udc, ep); + ep->state = STATUS_STAGE_TEST; + udc->test_mode = le16_to_cpu(crq->wIndex); + return 0; + } else if (feature_is_dev_remote_wakeup(crq)) { + udc->devstatus |= 1 << USB_DEVICE_REMOTE_WAKEUP; + } else { + goto stall; + } + } else if (crq->bRequestType == USB_RECIP_ENDPOINT) { + struct usba_ep *target; + + if (crq->wLength != cpu_to_le16(0) + || !feature_is_ep_halt(crq)) + goto stall; + + target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex)); + if (!target) + goto stall; + + usba_ep_writel(target, SET_STA, USBA_FORCE_STALL); + } else + goto delegate; + + send_status(udc, ep); + break; + } + + case USB_REQ_SET_ADDRESS: + if (crq->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE)) + goto delegate; + + set_address(udc, le16_to_cpu(crq->wValue)); + send_status(udc, ep); + ep->state = STATUS_STAGE_ADDR; + break; + + default: +delegate: + spin_unlock(&udc->lock); + retval = udc->driver->setup(&udc->gadget, crq); + spin_lock(&udc->lock); + } + + return retval; + +stall: + pr_err("udc: %s: Invalid setup request: %02x.%02x v%04x i%04x l%d, " + "halting endpoint...\n", + ep->ep.name, crq->bRequestType, crq->bRequest, + le16_to_cpu(crq->wValue), le16_to_cpu(crq->wIndex), + le16_to_cpu(crq->wLength)); + set_protocol_stall(udc, ep); + return -1; +} + +static void usba_control_irq(struct usba_udc *udc, struct usba_ep *ep) +{ + struct usba_request *req; + u32 epstatus; + u32 epctrl; + +restart: + epstatus = usba_ep_readl(ep, STA); + epctrl = usba_ep_readl(ep, CTL); + + DBG(DBG_INT, "%s [%d]: s/%08x c/%08x\n", + ep->ep.name, ep->state, epstatus, epctrl); + + req = NULL; + if (!list_empty(&ep->queue)) + req = list_entry(ep->queue.next, + struct usba_request, queue); + + if ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) { + if (req->submitted) + next_fifo_transaction(ep, req); + else + submit_request(ep, req); + + if (req->last_transaction) { + usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY); + usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE); + } + goto restart; + } + if ((epstatus & epctrl) & USBA_TX_COMPLETE) { + usba_ep_writel(ep, CLR_STA, USBA_TX_COMPLETE); + + switch (ep->state) { + case DATA_STAGE_IN: + usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY); + usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE); + ep->state = STATUS_STAGE_OUT; + break; + case STATUS_STAGE_ADDR: + /* Activate our new address */ + usba_writel(udc, CTRL, (usba_readl(udc, CTRL) + | USBA_FADDR_EN)); + usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE); + ep->state = WAIT_FOR_SETUP; + break; + case STATUS_STAGE_IN: + if (req) { + list_del_init(&req->queue); + request_complete(ep, req, 0); + submit_next_request(ep); + } + usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE); + ep->state = WAIT_FOR_SETUP; + break; + case STATUS_STAGE_TEST: + usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE); + ep->state = WAIT_FOR_SETUP; + if (do_test_mode(udc)) + set_protocol_stall(udc, ep); + break; + default: + pr_err("udc: %s: TXCOMP: Invalid endpoint state %d, " + "halting endpoint...\n", + ep->ep.name, ep->state); + set_protocol_stall(udc, ep); + break; + } + + goto restart; + } + if ((epstatus & epctrl) & USBA_RX_BK_RDY) { + switch (ep->state) { + case STATUS_STAGE_OUT: + usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY); + usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY); + + if (req) { + list_del_init(&req->queue); + request_complete(ep, req, 0); + } + ep->state = WAIT_FOR_SETUP; + break; + + case DATA_STAGE_OUT: + receive_data(ep); + break; + + default: + usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY); + usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY); + pr_err("udc: %s: RXRDY: Invalid endpoint state %d, " + "halting endpoint...\n", + ep->ep.name, ep->state); + set_protocol_stall(udc, ep); + break; + } + + goto restart; + } + if (epstatus & USBA_RX_SETUP) { + union { + struct usb_ctrlrequest crq; + unsigned long data[2]; + } crq; + unsigned int pkt_len; + int ret; + + if (ep->state != WAIT_FOR_SETUP) { + /* + * Didn't expect a SETUP packet at this + * point. Clean up any pending requests (which + * may be successful). + */ + int status = -EPROTO; + + /* + * RXRDY and TXCOMP are dropped when SETUP + * packets arrive. Just pretend we received + * the status packet. + */ + if (ep->state == STATUS_STAGE_OUT + || ep->state == STATUS_STAGE_IN) { + usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY); + status = 0; + } + + if (req) { + list_del_init(&req->queue); + request_complete(ep, req, status); + } + } + + pkt_len = USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA)); + DBG(DBG_HW, "Packet length: %u\n", pkt_len); + if (pkt_len != sizeof(crq)) { + pr_warn("udc: Invalid packet length %u (expected %zu)\n", + pkt_len, sizeof(crq)); + set_protocol_stall(udc, ep); + return; + } + + DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo); + memcpy_fromio(crq.data, ep->fifo, sizeof(crq)); + + /* Free up one bank in the FIFO so that we can + * generate or receive a reply right away. */ + usba_ep_writel(ep, CLR_STA, USBA_RX_SETUP); + + /* printk(KERN_DEBUG "setup: %d: %02x.%02x\n", + ep->state, crq.crq.bRequestType, + crq.crq.bRequest); */ + + if (crq.crq.bRequestType & USB_DIR_IN) { + /* + * The USB 2.0 spec states that "if wLength is + * zero, there is no data transfer phase." + * However, testusb #14 seems to actually + * expect a data phase even if wLength = 0... + */ + ep->state = DATA_STAGE_IN; + } else { + if (crq.crq.wLength != cpu_to_le16(0)) + ep->state = DATA_STAGE_OUT; + else + ep->state = STATUS_STAGE_IN; + } + + ret = -1; + if (ep->index == 0) + ret = handle_ep0_setup(udc, ep, &crq.crq); + else { + spin_unlock(&udc->lock); + ret = udc->driver->setup(&udc->gadget, &crq.crq); + spin_lock(&udc->lock); + } + + DBG(DBG_BUS, "req %02x.%02x, length %d, state %d, ret %d\n", + crq.crq.bRequestType, crq.crq.bRequest, + le16_to_cpu(crq.crq.wLength), ep->state, ret); + + if (ret < 0) { + /* Let the host know that we failed */ + set_protocol_stall(udc, ep); + } + } +} + +static void usba_ep_irq(struct usba_udc *udc, struct usba_ep *ep) +{ + struct usba_request *req; + u32 epstatus; + u32 epctrl; + + epstatus = usba_ep_readl(ep, STA); + epctrl = usba_ep_readl(ep, CTL); + + DBG(DBG_INT, "%s: interrupt, status: 0x%08x\n", ep->ep.name, epstatus); + + while ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) { + DBG(DBG_BUS, "%s: TX PK ready\n", ep->ep.name); + + if (list_empty(&ep->queue)) { + dev_warn(&udc->pdev->dev, "ep_irq: queue empty\n"); + usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY); + return; + } + + req = list_entry(ep->queue.next, struct usba_request, queue); + + if (req->using_dma) { + /* Send a zero-length packet */ + usba_ep_writel(ep, SET_STA, + USBA_TX_PK_RDY); + usba_ep_writel(ep, CTL_DIS, + USBA_TX_PK_RDY); + list_del_init(&req->queue); + submit_next_request(ep); + request_complete(ep, req, 0); + } else { + if (req->submitted) + next_fifo_transaction(ep, req); + else + submit_request(ep, req); + + if (req->last_transaction) { + list_del_init(&req->queue); + submit_next_request(ep); + request_complete(ep, req, 0); + } + } + + epstatus = usba_ep_readl(ep, STA); + epctrl = usba_ep_readl(ep, CTL); + } + if ((epstatus & epctrl) & USBA_RX_BK_RDY) { + DBG(DBG_BUS, "%s: RX data ready\n", ep->ep.name); + receive_data(ep); + } +} + +static void usba_dma_irq(struct usba_udc *udc, struct usba_ep *ep) +{ + struct usba_request *req; + u32 status, control, pending; + + status = usba_dma_readl(ep, STATUS); + control = usba_dma_readl(ep, CONTROL); +#ifdef CONFIG_USB_GADGET_DEBUG_FS + ep->last_dma_status = status; +#endif + pending = status & control; + DBG(DBG_INT | DBG_DMA, "dma irq, s/%#08x, c/%#08x\n", status, control); + + if (status & USBA_DMA_CH_EN) { + dev_err(&udc->pdev->dev, + "DMA_CH_EN is set after transfer is finished!\n"); + dev_err(&udc->pdev->dev, + "status=%#08x, pending=%#08x, control=%#08x\n", + status, pending, control); + + /* + * try to pretend nothing happened. We might have to + * do something here... + */ + } + + if (list_empty(&ep->queue)) + /* Might happen if a reset comes along at the right moment */ + return; + + if (pending & (USBA_DMA_END_TR_ST | USBA_DMA_END_BUF_ST)) { + req = list_entry(ep->queue.next, struct usba_request, queue); + usba_update_req(ep, req, status); + + list_del_init(&req->queue); + submit_next_request(ep); + request_complete(ep, req, 0); + } +} + +static int start_clock(struct usba_udc *udc); +static void stop_clock(struct usba_udc *udc); + +static irqreturn_t usba_udc_irq(int irq, void *devid) +{ + struct usba_udc *udc = devid; + u32 status, int_enb; + u32 dma_status; + u32 ep_status; + + spin_lock(&udc->lock); + + int_enb = usba_int_enb_get(udc); + status = usba_readl(udc, INT_STA) & (int_enb | USBA_HIGH_SPEED); + DBG(DBG_INT, "irq, status=%#08x\n", status); + + if (status & USBA_DET_SUSPEND) { + usba_writel(udc, INT_CLR, USBA_DET_SUSPEND|USBA_WAKE_UP); + usba_int_enb_set(udc, USBA_WAKE_UP); + usba_int_enb_clear(udc, USBA_DET_SUSPEND); + udc->suspended = true; + toggle_bias(udc, 0); + udc->bias_pulse_needed = true; + stop_clock(udc); + DBG(DBG_BUS, "Suspend detected\n"); + if (udc->gadget.speed != USB_SPEED_UNKNOWN + && udc->driver && udc->driver->suspend) { + spin_unlock(&udc->lock); + udc->driver->suspend(&udc->gadget); + spin_lock(&udc->lock); + } + } + + if (status & USBA_WAKE_UP) { + start_clock(udc); + toggle_bias(udc, 1); + usba_writel(udc, INT_CLR, USBA_WAKE_UP); + DBG(DBG_BUS, "Wake Up CPU detected\n"); + } + + if (status & USBA_END_OF_RESUME) { + udc->suspended = false; + usba_writel(udc, INT_CLR, USBA_END_OF_RESUME); + usba_int_enb_clear(udc, USBA_WAKE_UP); + usba_int_enb_set(udc, USBA_DET_SUSPEND); + generate_bias_pulse(udc); + DBG(DBG_BUS, "Resume detected\n"); + if (udc->gadget.speed != USB_SPEED_UNKNOWN + && udc->driver && udc->driver->resume) { + spin_unlock(&udc->lock); + udc->driver->resume(&udc->gadget); + spin_lock(&udc->lock); + } + } + + dma_status = USBA_BFEXT(DMA_INT, status); + if (dma_status) { + int i; + + usba_int_enb_set(udc, USBA_DET_SUSPEND); + + for (i = 1; i <= USBA_NR_DMAS; i++) + if (dma_status & (1 << i)) + usba_dma_irq(udc, &udc->usba_ep[i]); + } + + ep_status = USBA_BFEXT(EPT_INT, status); + if (ep_status) { + int i; + + usba_int_enb_set(udc, USBA_DET_SUSPEND); + + for (i = 0; i < udc->num_ep; i++) + if (ep_status & (1 << i)) { + if (ep_is_control(&udc->usba_ep[i])) + usba_control_irq(udc, &udc->usba_ep[i]); + else + usba_ep_irq(udc, &udc->usba_ep[i]); + } + } + + if (status & USBA_END_OF_RESET) { + struct usba_ep *ep0, *ep; + int i; + + usba_writel(udc, INT_CLR, + USBA_END_OF_RESET|USBA_END_OF_RESUME + |USBA_DET_SUSPEND|USBA_WAKE_UP); + generate_bias_pulse(udc); + reset_all_endpoints(udc); + + if (udc->gadget.speed != USB_SPEED_UNKNOWN && udc->driver) { + udc->gadget.speed = USB_SPEED_UNKNOWN; + spin_unlock(&udc->lock); + usb_gadget_udc_reset(&udc->gadget, udc->driver); + spin_lock(&udc->lock); + } + + if (status & USBA_HIGH_SPEED) + udc->gadget.speed = USB_SPEED_HIGH; + else + udc->gadget.speed = USB_SPEED_FULL; + DBG(DBG_BUS, "%s bus reset detected\n", + usb_speed_string(udc->gadget.speed)); + + ep0 = &udc->usba_ep[0]; + ep0->ep.desc = &usba_ep0_desc; + ep0->state = WAIT_FOR_SETUP; + usba_ep_writel(ep0, CFG, + (USBA_BF(EPT_SIZE, EP0_EPT_SIZE) + | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL) + | USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE))); + usba_ep_writel(ep0, CTL_ENB, + USBA_EPT_ENABLE | USBA_RX_SETUP); + + /* If we get reset while suspended... */ + udc->suspended = false; + usba_int_enb_clear(udc, USBA_WAKE_UP); + + usba_int_enb_set(udc, USBA_BF(EPT_INT, 1) | + USBA_DET_SUSPEND | USBA_END_OF_RESUME); + + /* + * Unclear why we hit this irregularly, e.g. in usbtest, + * but it's clearly harmless... + */ + if (!(usba_ep_readl(ep0, CFG) & USBA_EPT_MAPPED)) + dev_err(&udc->pdev->dev, + "ODD: EP0 configuration is invalid!\n"); + + /* Preallocate other endpoints */ + for (i = 1; i < udc->num_ep; i++) { + ep = &udc->usba_ep[i]; + if (ep->ep.claimed) { + usba_ep_writel(ep, CFG, ep->ept_cfg); + if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) + dev_err(&udc->pdev->dev, + "ODD: EP%d configuration is invalid!\n", i); + } + } + } + + spin_unlock(&udc->lock); + + return IRQ_HANDLED; +} + +static int start_clock(struct usba_udc *udc) +{ + int ret; + + if (udc->clocked) + return 0; + + pm_stay_awake(&udc->pdev->dev); + + ret = clk_prepare_enable(udc->pclk); + if (ret) + return ret; + ret = clk_prepare_enable(udc->hclk); + if (ret) { + clk_disable_unprepare(udc->pclk); + return ret; + } + + udc->clocked = true; + return 0; +} + +static void stop_clock(struct usba_udc *udc) +{ + if (!udc->clocked) + return; + + clk_disable_unprepare(udc->hclk); + clk_disable_unprepare(udc->pclk); + + udc->clocked = false; + + pm_relax(&udc->pdev->dev); +} + +static int usba_start(struct usba_udc *udc) +{ + unsigned long flags; + int ret; + + ret = start_clock(udc); + if (ret) + return ret; + + if (udc->suspended) + return 0; + + spin_lock_irqsave(&udc->lock, flags); + toggle_bias(udc, 1); + usba_writel(udc, CTRL, USBA_ENABLE_MASK); + /* Clear all requested and pending interrupts... */ + usba_writel(udc, INT_ENB, 0); + udc->int_enb_cache = 0; + usba_writel(udc, INT_CLR, + USBA_END_OF_RESET|USBA_END_OF_RESUME + |USBA_DET_SUSPEND|USBA_WAKE_UP); + /* ...and enable just 'reset' IRQ to get us started */ + usba_int_enb_set(udc, USBA_END_OF_RESET); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static void usba_stop(struct usba_udc *udc) +{ + unsigned long flags; + + if (udc->suspended) + return; + + spin_lock_irqsave(&udc->lock, flags); + udc->gadget.speed = USB_SPEED_UNKNOWN; + reset_all_endpoints(udc); + + /* This will also disable the DP pullup */ + toggle_bias(udc, 0); + usba_writel(udc, CTRL, USBA_DISABLE_MASK); + spin_unlock_irqrestore(&udc->lock, flags); + + stop_clock(udc); +} + +static irqreturn_t usba_vbus_irq_thread(int irq, void *devid) +{ + struct usba_udc *udc = devid; + int vbus; + + /* debounce */ + udelay(10); + + mutex_lock(&udc->vbus_mutex); + + vbus = vbus_is_present(udc); + if (vbus != udc->vbus_prev) { + if (vbus) { + usba_start(udc); + } else { + udc->suspended = false; + if (udc->driver->disconnect) + udc->driver->disconnect(&udc->gadget); + + usba_stop(udc); + } + udc->vbus_prev = vbus; + } + + mutex_unlock(&udc->vbus_mutex); + return IRQ_HANDLED; +} + +static int atmel_usba_pullup(struct usb_gadget *gadget, int is_on) +{ + struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget); + unsigned long flags; + u32 ctrl; + + spin_lock_irqsave(&udc->lock, flags); + ctrl = usba_readl(udc, CTRL); + if (is_on) + ctrl &= ~USBA_DETACH; + else + ctrl |= USBA_DETACH; + usba_writel(udc, CTRL, ctrl); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static int atmel_usba_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + int ret; + struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget); + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + udc->devstatus = 1 << USB_DEVICE_SELF_POWERED; + udc->driver = driver; + spin_unlock_irqrestore(&udc->lock, flags); + + mutex_lock(&udc->vbus_mutex); + + if (udc->vbus_pin) + enable_irq(gpiod_to_irq(udc->vbus_pin)); + + /* If Vbus is present, enable the controller and wait for reset */ + udc->vbus_prev = vbus_is_present(udc); + if (udc->vbus_prev) { + ret = usba_start(udc); + if (ret) + goto err; + } + + mutex_unlock(&udc->vbus_mutex); + return 0; + +err: + if (udc->vbus_pin) + disable_irq(gpiod_to_irq(udc->vbus_pin)); + + mutex_unlock(&udc->vbus_mutex); + + spin_lock_irqsave(&udc->lock, flags); + udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED); + udc->driver = NULL; + spin_unlock_irqrestore(&udc->lock, flags); + return ret; +} + +static int atmel_usba_stop(struct usb_gadget *gadget) +{ + struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget); + + if (udc->vbus_pin) + disable_irq(gpiod_to_irq(udc->vbus_pin)); + + udc->suspended = false; + usba_stop(udc); + + udc->driver = NULL; + + return 0; +} + +static void at91sam9rl_toggle_bias(struct usba_udc *udc, int is_on) +{ + regmap_update_bits(udc->pmc, AT91_CKGR_UCKR, AT91_PMC_BIASEN, + is_on ? AT91_PMC_BIASEN : 0); +} + +static void at91sam9g45_pulse_bias(struct usba_udc *udc) +{ + regmap_update_bits(udc->pmc, AT91_CKGR_UCKR, AT91_PMC_BIASEN, 0); + regmap_update_bits(udc->pmc, AT91_CKGR_UCKR, AT91_PMC_BIASEN, + AT91_PMC_BIASEN); +} + +static const struct usba_udc_errata at91sam9rl_errata = { + .toggle_bias = at91sam9rl_toggle_bias, +}; + +static const struct usba_udc_errata at91sam9g45_errata = { + .pulse_bias = at91sam9g45_pulse_bias, +}; + +static const struct usba_ep_config ep_config_sam9[] = { + { .nr_banks = 1 }, /* ep 0 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 1 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 2 */ + { .nr_banks = 3, .can_dma = 1 }, /* ep 3 */ + { .nr_banks = 3, .can_dma = 1 }, /* ep 4 */ + { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 5 */ + { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 6 */ +}; + +static const struct usba_ep_config ep_config_sama5[] = { + { .nr_banks = 1 }, /* ep 0 */ + { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 1 */ + { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 2 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 3 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 4 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 5 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 6 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 7 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 8 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 9 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 10 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 11 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 12 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 13 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 14 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 15 */ +}; + +static const struct usba_udc_config udc_at91sam9rl_cfg = { + .errata = &at91sam9rl_errata, + .config = ep_config_sam9, + .num_ep = ARRAY_SIZE(ep_config_sam9), + .ep_prealloc = true, +}; + +static const struct usba_udc_config udc_at91sam9g45_cfg = { + .errata = &at91sam9g45_errata, + .config = ep_config_sam9, + .num_ep = ARRAY_SIZE(ep_config_sam9), + .ep_prealloc = true, +}; + +static const struct usba_udc_config udc_sama5d3_cfg = { + .config = ep_config_sama5, + .num_ep = ARRAY_SIZE(ep_config_sama5), + .ep_prealloc = true, +}; + +static const struct usba_udc_config udc_sam9x60_cfg = { + .num_ep = ARRAY_SIZE(ep_config_sam9), + .config = ep_config_sam9, + .ep_prealloc = false, +}; + +static const struct of_device_id atmel_udc_dt_ids[] = { + { .compatible = "atmel,at91sam9rl-udc", .data = &udc_at91sam9rl_cfg }, + { .compatible = "atmel,at91sam9g45-udc", .data = &udc_at91sam9g45_cfg }, + { .compatible = "atmel,sama5d3-udc", .data = &udc_sama5d3_cfg }, + { .compatible = "microchip,sam9x60-udc", .data = &udc_sam9x60_cfg }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, atmel_udc_dt_ids); + +static const struct of_device_id atmel_pmc_dt_ids[] = { + { .compatible = "atmel,at91sam9g45-pmc" }, + { .compatible = "atmel,at91sam9rl-pmc" }, + { .compatible = "atmel,at91sam9x5-pmc" }, + { /* sentinel */ } +}; + +static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, + struct usba_udc *udc) +{ + struct device_node *np = pdev->dev.of_node; + const struct of_device_id *match; + struct device_node *pp; + int i, ret; + struct usba_ep *eps, *ep; + const struct usba_udc_config *udc_config; + + match = of_match_node(atmel_udc_dt_ids, np); + if (!match) + return ERR_PTR(-EINVAL); + + udc_config = match->data; + udc->ep_prealloc = udc_config->ep_prealloc; + udc->errata = udc_config->errata; + if (udc->errata) { + pp = of_find_matching_node_and_match(NULL, atmel_pmc_dt_ids, + NULL); + if (!pp) + return ERR_PTR(-ENODEV); + + udc->pmc = syscon_node_to_regmap(pp); + of_node_put(pp); + if (IS_ERR(udc->pmc)) + return ERR_CAST(udc->pmc); + } + + udc->num_ep = 0; + + udc->vbus_pin = devm_gpiod_get_optional(&pdev->dev, "atmel,vbus", + GPIOD_IN); + if (IS_ERR(udc->vbus_pin)) + return ERR_CAST(udc->vbus_pin); + + if (fifo_mode == 0) { + udc->num_ep = udc_config->num_ep; + } else { + udc->num_ep = usba_config_fifo_table(udc); + } + + eps = devm_kcalloc(&pdev->dev, udc->num_ep, sizeof(struct usba_ep), + GFP_KERNEL); + if (!eps) + return ERR_PTR(-ENOMEM); + + udc->gadget.ep0 = &eps[0].ep; + + INIT_LIST_HEAD(&eps[0].ep.ep_list); + + i = 0; + while (i < udc->num_ep) { + const struct usba_ep_config *ep_cfg = &udc_config->config[i]; + + ep = &eps[i]; + + ep->index = fifo_mode ? udc->fifo_cfg[i].hw_ep_num : i; + + /* Only the first EP is 64 bytes */ + if (ep->index == 0) + ep->fifo_size = 64; + else + ep->fifo_size = 1024; + + if (fifo_mode) { + if (ep->fifo_size < udc->fifo_cfg[i].fifo_size) + dev_warn(&pdev->dev, + "Using default max fifo-size value\n"); + else + ep->fifo_size = udc->fifo_cfg[i].fifo_size; + } + + ep->nr_banks = ep_cfg->nr_banks; + if (fifo_mode) { + if (ep->nr_banks < udc->fifo_cfg[i].nr_banks) + dev_warn(&pdev->dev, + "Using default max nb-banks value\n"); + else + ep->nr_banks = udc->fifo_cfg[i].nr_banks; + } + + ep->can_dma = ep_cfg->can_dma; + ep->can_isoc = ep_cfg->can_isoc; + + sprintf(ep->name, "ep%d", ep->index); + ep->ep.name = ep->name; + + ep->ep_regs = udc->regs + USBA_EPT_BASE(i); + ep->dma_regs = udc->regs + USBA_DMA_BASE(i); + ep->fifo = udc->fifo + USBA_FIFO_BASE(i); + ep->ep.ops = &usba_ep_ops; + usb_ep_set_maxpacket_limit(&ep->ep, ep->fifo_size); + ep->udc = udc; + INIT_LIST_HEAD(&ep->queue); + + if (ep->index == 0) { + ep->ep.caps.type_control = true; + } else { + ep->ep.caps.type_iso = ep->can_isoc; + ep->ep.caps.type_bulk = true; + ep->ep.caps.type_int = true; + } + + ep->ep.caps.dir_in = true; + ep->ep.caps.dir_out = true; + + if (fifo_mode != 0) { + /* + * Generate ept_cfg based on FIFO size and + * banks number + */ + if (ep->fifo_size <= 8) + ep->ept_cfg = USBA_BF(EPT_SIZE, USBA_EPT_SIZE_8); + else + /* LSB is bit 1, not 0 */ + ep->ept_cfg = + USBA_BF(EPT_SIZE, fls(ep->fifo_size - 1) - 3); + + ep->ept_cfg |= USBA_BF(BK_NUMBER, ep->nr_banks); + } + + if (i) + list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); + + i++; + } + + if (i == 0) { + dev_err(&pdev->dev, "of_probe: no endpoint specified\n"); + ret = -EINVAL; + goto err; + } + + return eps; +err: + return ERR_PTR(ret); +} + +static int usba_udc_probe(struct platform_device *pdev) +{ + struct resource *res; + struct clk *pclk, *hclk; + struct usba_udc *udc; + int irq, ret, i; + + udc = devm_kzalloc(&pdev->dev, sizeof(*udc), GFP_KERNEL); + if (!udc) + return -ENOMEM; + + udc->gadget = usba_gadget_template; + INIT_LIST_HEAD(&udc->gadget.ep_list); + + res = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID); + udc->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(udc->regs)) + return PTR_ERR(udc->regs); + dev_info(&pdev->dev, "MMIO registers at %pR mapped at %p\n", + res, udc->regs); + + res = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID); + udc->fifo = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(udc->fifo)) + return PTR_ERR(udc->fifo); + dev_info(&pdev->dev, "FIFO at %pR mapped at %p\n", res, udc->fifo); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + pclk = devm_clk_get(&pdev->dev, "pclk"); + if (IS_ERR(pclk)) + return PTR_ERR(pclk); + hclk = devm_clk_get(&pdev->dev, "hclk"); + if (IS_ERR(hclk)) + return PTR_ERR(hclk); + + spin_lock_init(&udc->lock); + mutex_init(&udc->vbus_mutex); + udc->pdev = pdev; + udc->pclk = pclk; + udc->hclk = hclk; + + platform_set_drvdata(pdev, udc); + + /* Make sure we start from a clean slate */ + ret = clk_prepare_enable(pclk); + if (ret) { + dev_err(&pdev->dev, "Unable to enable pclk, aborting.\n"); + return ret; + } + + usba_writel(udc, CTRL, USBA_DISABLE_MASK); + clk_disable_unprepare(pclk); + + udc->usba_ep = atmel_udc_of_init(pdev, udc); + + toggle_bias(udc, 0); + + if (IS_ERR(udc->usba_ep)) + return PTR_ERR(udc->usba_ep); + + ret = devm_request_irq(&pdev->dev, irq, usba_udc_irq, 0, + "atmel_usba_udc", udc); + if (ret) { + dev_err(&pdev->dev, "Cannot request irq %d (error %d)\n", + irq, ret); + return ret; + } + udc->irq = irq; + + if (udc->vbus_pin) { + irq_set_status_flags(gpiod_to_irq(udc->vbus_pin), IRQ_NOAUTOEN); + ret = devm_request_threaded_irq(&pdev->dev, + gpiod_to_irq(udc->vbus_pin), NULL, + usba_vbus_irq_thread, USBA_VBUS_IRQFLAGS, + "atmel_usba_udc", udc); + if (ret) { + udc->vbus_pin = NULL; + dev_warn(&udc->pdev->dev, + "failed to request vbus irq; " + "assuming always on\n"); + } + } + + ret = usb_add_gadget_udc(&pdev->dev, &udc->gadget); + if (ret) + return ret; + device_init_wakeup(&pdev->dev, 1); + + usba_init_debugfs(udc); + for (i = 1; i < udc->num_ep; i++) + usba_ep_init_debugfs(udc, &udc->usba_ep[i]); + + return 0; +} + +static int usba_udc_remove(struct platform_device *pdev) +{ + struct usba_udc *udc; + int i; + + udc = platform_get_drvdata(pdev); + + device_init_wakeup(&pdev->dev, 0); + usb_del_gadget_udc(&udc->gadget); + + for (i = 1; i < udc->num_ep; i++) + usba_ep_cleanup_debugfs(&udc->usba_ep[i]); + usba_cleanup_debugfs(udc); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int usba_udc_suspend(struct device *dev) +{ + struct usba_udc *udc = dev_get_drvdata(dev); + + /* Not started */ + if (!udc->driver) + return 0; + + mutex_lock(&udc->vbus_mutex); + + if (!device_may_wakeup(dev)) { + udc->suspended = false; + usba_stop(udc); + goto out; + } + + /* + * Device may wake up. We stay clocked if we failed + * to request vbus irq, assuming always on. + */ + if (udc->vbus_pin) { + /* FIXME: right to stop here...??? */ + usba_stop(udc); + enable_irq_wake(gpiod_to_irq(udc->vbus_pin)); + } + + enable_irq_wake(udc->irq); + +out: + mutex_unlock(&udc->vbus_mutex); + return 0; +} + +static int usba_udc_resume(struct device *dev) +{ + struct usba_udc *udc = dev_get_drvdata(dev); + + /* Not started */ + if (!udc->driver) + return 0; + + if (device_may_wakeup(dev)) { + if (udc->vbus_pin) + disable_irq_wake(gpiod_to_irq(udc->vbus_pin)); + + disable_irq_wake(udc->irq); + } + + /* If Vbus is present, enable the controller and wait for reset */ + mutex_lock(&udc->vbus_mutex); + udc->vbus_prev = vbus_is_present(udc); + if (udc->vbus_prev) + usba_start(udc); + mutex_unlock(&udc->vbus_mutex); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(usba_udc_pm_ops, usba_udc_suspend, usba_udc_resume); + +static struct platform_driver udc_driver = { + .probe = usba_udc_probe, + .remove = usba_udc_remove, + .driver = { + .name = "atmel_usba_udc", + .pm = &usba_udc_pm_ops, + .of_match_table = atmel_udc_dt_ids, + }, +}; +module_platform_driver(udc_driver); + +MODULE_DESCRIPTION("Atmel USBA UDC driver"); +MODULE_AUTHOR("Haavard Skinnemoen (Atmel)"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:atmel_usba_udc"); diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.h b/drivers/usb/gadget/udc/atmel_usba_udc.h new file mode 100644 index 000000000..620472f21 --- /dev/null +++ b/drivers/usb/gadget/udc/atmel_usba_udc.h @@ -0,0 +1,381 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for the Atmel USBA high speed USB device controller + * + * Copyright (C) 2005-2007 Atmel Corporation + */ +#ifndef __LINUX_USB_GADGET_USBA_UDC_H__ +#define __LINUX_USB_GADGET_USBA_UDC_H__ + +#include <linux/gpio/consumer.h> + +/* USB register offsets */ +#define USBA_CTRL 0x0000 +#define USBA_FNUM 0x0004 +#define USBA_INT_ENB 0x0010 +#define USBA_INT_STA 0x0014 +#define USBA_INT_CLR 0x0018 +#define USBA_EPT_RST 0x001c +#define USBA_TST 0x00e0 + +/* USB endpoint register offsets */ +#define USBA_EPT_CFG 0x0000 +#define USBA_EPT_CTL_ENB 0x0004 +#define USBA_EPT_CTL_DIS 0x0008 +#define USBA_EPT_CTL 0x000c +#define USBA_EPT_SET_STA 0x0014 +#define USBA_EPT_CLR_STA 0x0018 +#define USBA_EPT_STA 0x001c + +/* USB DMA register offsets */ +#define USBA_DMA_NXT_DSC 0x0000 +#define USBA_DMA_ADDRESS 0x0004 +#define USBA_DMA_CONTROL 0x0008 +#define USBA_DMA_STATUS 0x000c + +/* Bitfields in CTRL */ +#define USBA_DEV_ADDR_OFFSET 0 +#define USBA_DEV_ADDR_SIZE 7 +#define USBA_FADDR_EN (1 << 7) +#define USBA_EN_USBA (1 << 8) +#define USBA_DETACH (1 << 9) +#define USBA_REMOTE_WAKE_UP (1 << 10) +#define USBA_PULLD_DIS (1 << 11) + +#define USBA_ENABLE_MASK (USBA_EN_USBA | USBA_PULLD_DIS) +#define USBA_DISABLE_MASK USBA_DETACH + +/* Bitfields in FNUM */ +#define USBA_MICRO_FRAME_NUM_OFFSET 0 +#define USBA_MICRO_FRAME_NUM_SIZE 3 +#define USBA_FRAME_NUMBER_OFFSET 3 +#define USBA_FRAME_NUMBER_SIZE 11 +#define USBA_FRAME_NUM_ERROR (1 << 31) + +/* Bitfields in INT_ENB/INT_STA/INT_CLR */ +#define USBA_HIGH_SPEED (1 << 0) +#define USBA_DET_SUSPEND (1 << 1) +#define USBA_MICRO_SOF (1 << 2) +#define USBA_SOF (1 << 3) +#define USBA_END_OF_RESET (1 << 4) +#define USBA_WAKE_UP (1 << 5) +#define USBA_END_OF_RESUME (1 << 6) +#define USBA_UPSTREAM_RESUME (1 << 7) +#define USBA_EPT_INT_OFFSET 8 +#define USBA_EPT_INT_SIZE 16 +#define USBA_DMA_INT_OFFSET 24 +#define USBA_DMA_INT_SIZE 8 + +/* Bitfields in EPT_RST */ +#define USBA_RST_OFFSET 0 +#define USBA_RST_SIZE 16 + +/* Bitfields in USBA_TST */ +#define USBA_SPEED_CFG_OFFSET 0 +#define USBA_SPEED_CFG_SIZE 2 +#define USBA_TST_J_MODE (1 << 2) +#define USBA_TST_K_MODE (1 << 3) +#define USBA_TST_PKT_MODE (1 << 4) +#define USBA_OPMODE2 (1 << 5) + +/* Bitfields in EPT_CFG */ +#define USBA_EPT_SIZE_OFFSET 0 +#define USBA_EPT_SIZE_SIZE 3 +#define USBA_EPT_DIR_IN (1 << 3) +#define USBA_EPT_TYPE_OFFSET 4 +#define USBA_EPT_TYPE_SIZE 2 +#define USBA_BK_NUMBER_OFFSET 6 +#define USBA_BK_NUMBER_SIZE 2 +#define USBA_NB_TRANS_OFFSET 8 +#define USBA_NB_TRANS_SIZE 2 +#define USBA_EPT_MAPPED (1 << 31) + +/* Bitfields in EPT_CTL/EPT_CTL_ENB/EPT_CTL_DIS */ +#define USBA_EPT_ENABLE (1 << 0) +#define USBA_AUTO_VALID (1 << 1) +#define USBA_INTDIS_DMA (1 << 3) +#define USBA_NYET_DIS (1 << 4) +#define USBA_DATAX_RX (1 << 6) +#define USBA_MDATA_RX (1 << 7) +/* Bits 8-15 and 31 enable interrupts for respective bits in EPT_STA */ +#define USBA_BUSY_BANK_IE (1 << 18) + +/* Bitfields in EPT_SET_STA/EPT_CLR_STA/EPT_STA */ +#define USBA_FORCE_STALL (1 << 5) +#define USBA_TOGGLE_CLR (1 << 6) +#define USBA_TOGGLE_SEQ_OFFSET 6 +#define USBA_TOGGLE_SEQ_SIZE 2 +#define USBA_ERR_OVFLW (1 << 8) +#define USBA_RX_BK_RDY (1 << 9) +#define USBA_KILL_BANK (1 << 9) +#define USBA_TX_COMPLETE (1 << 10) +#define USBA_TX_PK_RDY (1 << 11) +#define USBA_ISO_ERR_TRANS (1 << 11) +#define USBA_RX_SETUP (1 << 12) +#define USBA_ISO_ERR_FLOW (1 << 12) +#define USBA_STALL_SENT (1 << 13) +#define USBA_ISO_ERR_CRC (1 << 13) +#define USBA_ISO_ERR_NBTRANS (1 << 13) +#define USBA_NAK_IN (1 << 14) +#define USBA_ISO_ERR_FLUSH (1 << 14) +#define USBA_NAK_OUT (1 << 15) +#define USBA_CURRENT_BANK_OFFSET 16 +#define USBA_CURRENT_BANK_SIZE 2 +#define USBA_BUSY_BANKS_OFFSET 18 +#define USBA_BUSY_BANKS_SIZE 2 +#define USBA_BYTE_COUNT_OFFSET 20 +#define USBA_BYTE_COUNT_SIZE 11 +#define USBA_SHORT_PACKET (1 << 31) + +/* Bitfields in DMA_CONTROL */ +#define USBA_DMA_CH_EN (1 << 0) +#define USBA_DMA_LINK (1 << 1) +#define USBA_DMA_END_TR_EN (1 << 2) +#define USBA_DMA_END_BUF_EN (1 << 3) +#define USBA_DMA_END_TR_IE (1 << 4) +#define USBA_DMA_END_BUF_IE (1 << 5) +#define USBA_DMA_DESC_LOAD_IE (1 << 6) +#define USBA_DMA_BURST_LOCK (1 << 7) +#define USBA_DMA_BUF_LEN_OFFSET 16 +#define USBA_DMA_BUF_LEN_SIZE 16 + +/* Bitfields in DMA_STATUS */ +#define USBA_DMA_CH_ACTIVE (1 << 1) +#define USBA_DMA_END_TR_ST (1 << 4) +#define USBA_DMA_END_BUF_ST (1 << 5) +#define USBA_DMA_DESC_LOAD_ST (1 << 6) + +/* Constants for SPEED_CFG */ +#define USBA_SPEED_CFG_NORMAL 0 +#define USBA_SPEED_CFG_FORCE_HIGH 2 +#define USBA_SPEED_CFG_FORCE_FULL 3 + +/* Constants for EPT_SIZE */ +#define USBA_EPT_SIZE_8 0 +#define USBA_EPT_SIZE_16 1 +#define USBA_EPT_SIZE_32 2 +#define USBA_EPT_SIZE_64 3 +#define USBA_EPT_SIZE_128 4 +#define USBA_EPT_SIZE_256 5 +#define USBA_EPT_SIZE_512 6 +#define USBA_EPT_SIZE_1024 7 + +/* Constants for EPT_TYPE */ +#define USBA_EPT_TYPE_CONTROL 0 +#define USBA_EPT_TYPE_ISO 1 +#define USBA_EPT_TYPE_BULK 2 +#define USBA_EPT_TYPE_INT 3 + +/* Constants for BK_NUMBER */ +#define USBA_BK_NUMBER_ZERO 0 +#define USBA_BK_NUMBER_ONE 1 +#define USBA_BK_NUMBER_DOUBLE 2 +#define USBA_BK_NUMBER_TRIPLE 3 + +/* Bit manipulation macros */ +#define USBA_BF(name, value) \ + (((value) & ((1 << USBA_##name##_SIZE) - 1)) \ + << USBA_##name##_OFFSET) +#define USBA_BFEXT(name, value) \ + (((value) >> USBA_##name##_OFFSET) \ + & ((1 << USBA_##name##_SIZE) - 1)) +#define USBA_BFINS(name, value, old) \ + (((old) & ~(((1 << USBA_##name##_SIZE) - 1) \ + << USBA_##name##_OFFSET)) \ + | USBA_BF(name, value)) + +/* Register access macros */ +#define usba_readl(udc, reg) \ + readl_relaxed((udc)->regs + USBA_##reg) +#define usba_writel(udc, reg, value) \ + writel_relaxed((value), (udc)->regs + USBA_##reg) +#define usba_ep_readl(ep, reg) \ + readl_relaxed((ep)->ep_regs + USBA_EPT_##reg) +#define usba_ep_writel(ep, reg, value) \ + writel_relaxed((value), (ep)->ep_regs + USBA_EPT_##reg) +#define usba_dma_readl(ep, reg) \ + readl_relaxed((ep)->dma_regs + USBA_DMA_##reg) +#define usba_dma_writel(ep, reg, value) \ + writel_relaxed((value), (ep)->dma_regs + USBA_DMA_##reg) + +/* Calculate base address for a given endpoint or DMA controller */ +#define USBA_EPT_BASE(x) (0x100 + (x) * 0x20) +#define USBA_DMA_BASE(x) (0x300 + (x) * 0x10) +#define USBA_FIFO_BASE(x) ((x) << 16) + +/* Synth parameters */ +#define USBA_NR_DMAS 7 + +#define EP0_FIFO_SIZE 64 +#define EP0_EPT_SIZE USBA_EPT_SIZE_64 +#define EP0_NR_BANKS 1 + +#define FIFO_IOMEM_ID 0 +#define CTRL_IOMEM_ID 1 + +#define DBG_ERR 0x0001 /* report all error returns */ +#define DBG_HW 0x0002 /* debug hardware initialization */ +#define DBG_GADGET 0x0004 /* calls to/from gadget driver */ +#define DBG_INT 0x0008 /* interrupts */ +#define DBG_BUS 0x0010 /* report changes in bus state */ +#define DBG_QUEUE 0x0020 /* debug request queue processing */ +#define DBG_FIFO 0x0040 /* debug FIFO contents */ +#define DBG_DMA 0x0080 /* debug DMA handling */ +#define DBG_REQ 0x0100 /* print out queued request length */ +#define DBG_ALL 0xffff +#define DBG_NONE 0x0000 + +#define DEBUG_LEVEL (DBG_ERR) + +#define DBG(level, fmt, ...) \ + do { \ + if ((level) & DEBUG_LEVEL) \ + pr_debug("udc: " fmt, ## __VA_ARGS__); \ + } while (0) + +enum usba_ctrl_state { + WAIT_FOR_SETUP, + DATA_STAGE_IN, + DATA_STAGE_OUT, + STATUS_STAGE_IN, + STATUS_STAGE_OUT, + STATUS_STAGE_ADDR, + STATUS_STAGE_TEST, +}; +/* + EP_STATE_IDLE, + EP_STATE_SETUP, + EP_STATE_IN_DATA, + EP_STATE_OUT_DATA, + EP_STATE_SET_ADDR_STATUS, + EP_STATE_RX_STATUS, + EP_STATE_TX_STATUS, + EP_STATE_HALT, +*/ + +struct usba_dma_desc { + dma_addr_t next; + dma_addr_t addr; + u32 ctrl; +}; + +struct usba_fifo_cfg { + u8 hw_ep_num; + u16 fifo_size; + u8 nr_banks; +}; + +struct usba_ep { + int state; + void __iomem *ep_regs; + void __iomem *dma_regs; + void __iomem *fifo; + char name[8]; + struct usb_ep ep; + struct usba_udc *udc; + + struct list_head queue; + + u16 fifo_size; + u8 nr_banks; + u8 index; + unsigned int can_dma:1; + unsigned int can_isoc:1; + unsigned int is_isoc:1; + unsigned int is_in:1; + unsigned long ept_cfg; +#ifdef CONFIG_USB_GADGET_DEBUG_FS + u32 last_dma_status; + struct dentry *debugfs_dir; +#endif +}; + +struct usba_ep_config { + u8 nr_banks; + unsigned int can_dma:1; + unsigned int can_isoc:1; +}; + +struct usba_request { + struct usb_request req; + struct list_head queue; + + u32 ctrl; + + unsigned int submitted:1; + unsigned int last_transaction:1; + unsigned int using_dma:1; + unsigned int mapped:1; +}; + +struct usba_udc_errata { + void (*toggle_bias)(struct usba_udc *udc, int is_on); + void (*pulse_bias)(struct usba_udc *udc); +}; + +struct usba_udc_config { + const struct usba_udc_errata *errata; + const struct usba_ep_config *config; + const int num_ep; + const bool ep_prealloc; +}; + +struct usba_udc { + /* Protect hw registers from concurrent modifications */ + spinlock_t lock; + + /* Mutex to prevent concurrent start or stop */ + struct mutex vbus_mutex; + + void __iomem *regs; + void __iomem *fifo; + + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + struct platform_device *pdev; + const struct usba_udc_errata *errata; + int irq; + struct gpio_desc *vbus_pin; + int num_ep; + struct usba_fifo_cfg *fifo_cfg; + struct clk *pclk; + struct clk *hclk; + struct usba_ep *usba_ep; + bool bias_pulse_needed; + bool clocked; + bool suspended; + bool ep_prealloc; + + u16 devstatus; + + u16 test_mode; + int vbus_prev; + + u32 int_enb_cache; + +#ifdef CONFIG_USB_GADGET_DEBUG_FS + struct dentry *debugfs_root; +#endif + + struct regmap *pmc; +}; + +static inline struct usba_ep *to_usba_ep(struct usb_ep *ep) +{ + return container_of(ep, struct usba_ep, ep); +} + +static inline struct usba_request *to_usba_req(struct usb_request *req) +{ + return container_of(req, struct usba_request, req); +} + +static inline struct usba_udc *to_usba_udc(struct usb_gadget *gadget) +{ + return container_of(gadget, struct usba_udc, gadget); +} + +#define ep_is_control(ep) ((ep)->index == 0) +#define ep_is_idle(ep) ((ep)->state == EP_STATE_IDLE) + +#endif /* __LINUX_USB_GADGET_USBA_UDC_H */ diff --git a/drivers/usb/gadget/udc/bcm63xx_udc.c b/drivers/usb/gadget/udc/bcm63xx_udc.c new file mode 100644 index 000000000..8d5892891 --- /dev/null +++ b/drivers/usb/gadget/udc/bcm63xx_udc.c @@ -0,0 +1,2387 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * bcm63xx_udc.c -- BCM63xx UDC high/full speed USB device controller + * + * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com> + * Copyright (C) 2012 Broadcom Corporation + */ + +#include <linux/bitops.h> +#include <linux/bug.h> +#include <linux/clk.h> +#include <linux/compiler.h> +#include <linux/debugfs.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <linux/seq_file.h> +#include <linux/slab.h> +#include <linux/timer.h> +#include <linux/usb.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/workqueue.h> + +#include <bcm63xx_cpu.h> +#include <bcm63xx_iudma.h> +#include <bcm63xx_dev_usb_usbd.h> +#include <bcm63xx_io.h> +#include <bcm63xx_regs.h> + +#define DRV_MODULE_NAME "bcm63xx_udc" + +static const char bcm63xx_ep0name[] = "ep0"; + +static const struct { + const char *name; + const struct usb_ep_caps caps; +} bcm63xx_ep_info[] = { +#define EP_INFO(_name, _caps) \ + { \ + .name = _name, \ + .caps = _caps, \ + } + + EP_INFO(bcm63xx_ep0name, + USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, USB_EP_CAPS_DIR_ALL)), + EP_INFO("ep1in-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep2out-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep3in-int", + USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep4out-int", + USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_OUT)), + +#undef EP_INFO +}; + +static bool use_fullspeed; +module_param(use_fullspeed, bool, S_IRUGO); +MODULE_PARM_DESC(use_fullspeed, "true for fullspeed only"); + +/* + * RX IRQ coalescing options: + * + * false (default) - one IRQ per DATAx packet. Slow but reliable. The + * driver is able to pass the "testusb" suite and recover from conditions like: + * + * 1) Device queues up a 2048-byte RX IUDMA transaction on an OUT bulk ep + * 2) Host sends 512 bytes of data + * 3) Host decides to reconfigure the device and sends SET_INTERFACE + * 4) Device shuts down the endpoint and cancels the RX transaction + * + * true - one IRQ per transfer, for transfers <= 2048B. Generates + * considerably fewer IRQs, but error recovery is less robust. Does not + * reliably pass "testusb". + * + * TX always uses coalescing, because we can cancel partially complete TX + * transfers by repeatedly flushing the FIFO. The hardware doesn't allow + * this on RX. + */ +static bool irq_coalesce; +module_param(irq_coalesce, bool, S_IRUGO); +MODULE_PARM_DESC(irq_coalesce, "take one IRQ per RX transfer"); + +#define BCM63XX_NUM_EP 5 +#define BCM63XX_NUM_IUDMA 6 +#define BCM63XX_NUM_FIFO_PAIRS 3 + +#define IUDMA_RESET_TIMEOUT_US 10000 + +#define IUDMA_EP0_RXCHAN 0 +#define IUDMA_EP0_TXCHAN 1 + +#define IUDMA_MAX_FRAGMENT 2048 +#define BCM63XX_MAX_CTRL_PKT 64 + +#define BCMEP_CTRL 0x00 +#define BCMEP_ISOC 0x01 +#define BCMEP_BULK 0x02 +#define BCMEP_INTR 0x03 + +#define BCMEP_OUT 0x00 +#define BCMEP_IN 0x01 + +#define BCM63XX_SPD_FULL 1 +#define BCM63XX_SPD_HIGH 0 + +#define IUDMA_DMAC_OFFSET 0x200 +#define IUDMA_DMAS_OFFSET 0x400 + +enum bcm63xx_ep0_state { + EP0_REQUEUE, + EP0_IDLE, + EP0_IN_DATA_PHASE_SETUP, + EP0_IN_DATA_PHASE_COMPLETE, + EP0_OUT_DATA_PHASE_SETUP, + EP0_OUT_DATA_PHASE_COMPLETE, + EP0_OUT_STATUS_PHASE, + EP0_IN_FAKE_STATUS_PHASE, + EP0_SHUTDOWN, +}; + +static const char __maybe_unused bcm63xx_ep0_state_names[][32] = { + "REQUEUE", + "IDLE", + "IN_DATA_PHASE_SETUP", + "IN_DATA_PHASE_COMPLETE", + "OUT_DATA_PHASE_SETUP", + "OUT_DATA_PHASE_COMPLETE", + "OUT_STATUS_PHASE", + "IN_FAKE_STATUS_PHASE", + "SHUTDOWN", +}; + +/** + * struct iudma_ch_cfg - Static configuration for an IUDMA channel. + * @ep_num: USB endpoint number. + * @n_bds: Number of buffer descriptors in the ring. + * @ep_type: Endpoint type (control, bulk, interrupt). + * @dir: Direction (in, out). + * @n_fifo_slots: Number of FIFO entries to allocate for this channel. + * @max_pkt_hs: Maximum packet size in high speed mode. + * @max_pkt_fs: Maximum packet size in full speed mode. + */ +struct iudma_ch_cfg { + int ep_num; + int n_bds; + int ep_type; + int dir; + int n_fifo_slots; + int max_pkt_hs; + int max_pkt_fs; +}; + +static const struct iudma_ch_cfg iudma_defaults[] = { + + /* This controller was designed to support a CDC/RNDIS application. + It may be possible to reconfigure some of the endpoints, but + the hardware limitations (FIFO sizing and number of DMA channels) + may significantly impact flexibility and/or stability. Change + these values at your own risk. + + ep_num ep_type n_fifo_slots max_pkt_fs + idx | n_bds | dir | max_pkt_hs | + | | | | | | | | */ + [0] = { -1, 4, BCMEP_CTRL, BCMEP_OUT, 32, 64, 64 }, + [1] = { 0, 4, BCMEP_CTRL, BCMEP_OUT, 32, 64, 64 }, + [2] = { 2, 16, BCMEP_BULK, BCMEP_OUT, 128, 512, 64 }, + [3] = { 1, 16, BCMEP_BULK, BCMEP_IN, 128, 512, 64 }, + [4] = { 4, 4, BCMEP_INTR, BCMEP_OUT, 32, 64, 64 }, + [5] = { 3, 4, BCMEP_INTR, BCMEP_IN, 32, 64, 64 }, +}; + +struct bcm63xx_udc; + +/** + * struct iudma_ch - Represents the current state of a single IUDMA channel. + * @ch_idx: IUDMA channel index (0 to BCM63XX_NUM_IUDMA-1). + * @ep_num: USB endpoint number. -1 for ep0 RX. + * @enabled: Whether bcm63xx_ep_enable() has been called. + * @max_pkt: "Chunk size" on the USB interface. Based on interface speed. + * @is_tx: true for TX, false for RX. + * @bep: Pointer to the associated endpoint. NULL for ep0 RX. + * @udc: Reference to the device controller. + * @read_bd: Next buffer descriptor to reap from the hardware. + * @write_bd: Next BD available for a new packet. + * @end_bd: Points to the final BD in the ring. + * @n_bds_used: Number of BD entries currently occupied. + * @bd_ring: Base pointer to the BD ring. + * @bd_ring_dma: Physical (DMA) address of bd_ring. + * @n_bds: Total number of BDs in the ring. + * + * ep0 has two IUDMA channels (IUDMA_EP0_RXCHAN and IUDMA_EP0_TXCHAN), as it is + * bidirectional. The "struct usb_ep" associated with ep0 is for TX (IN) + * only. + * + * Each bulk/intr endpoint has a single IUDMA channel and a single + * struct usb_ep. + */ +struct iudma_ch { + unsigned int ch_idx; + int ep_num; + bool enabled; + int max_pkt; + bool is_tx; + struct bcm63xx_ep *bep; + struct bcm63xx_udc *udc; + + struct bcm_enet_desc *read_bd; + struct bcm_enet_desc *write_bd; + struct bcm_enet_desc *end_bd; + int n_bds_used; + + struct bcm_enet_desc *bd_ring; + dma_addr_t bd_ring_dma; + unsigned int n_bds; +}; + +/** + * struct bcm63xx_ep - Internal (driver) state of a single endpoint. + * @ep_num: USB endpoint number. + * @iudma: Pointer to IUDMA channel state. + * @ep: USB gadget layer representation of the EP. + * @udc: Reference to the device controller. + * @queue: Linked list of outstanding requests for this EP. + * @halted: 1 if the EP is stalled; 0 otherwise. + */ +struct bcm63xx_ep { + unsigned int ep_num; + struct iudma_ch *iudma; + struct usb_ep ep; + struct bcm63xx_udc *udc; + struct list_head queue; + unsigned halted:1; +}; + +/** + * struct bcm63xx_req - Internal (driver) state of a single request. + * @queue: Links back to the EP's request list. + * @req: USB gadget layer representation of the request. + * @offset: Current byte offset into the data buffer (next byte to queue). + * @bd_bytes: Number of data bytes in outstanding BD entries. + * @iudma: IUDMA channel used for the request. + */ +struct bcm63xx_req { + struct list_head queue; /* ep's requests */ + struct usb_request req; + unsigned int offset; + unsigned int bd_bytes; + struct iudma_ch *iudma; +}; + +/** + * struct bcm63xx_udc - Driver/hardware private context. + * @lock: Spinlock to mediate access to this struct, and (most) HW regs. + * @dev: Generic Linux device structure. + * @pd: Platform data (board/port info). + * @usbd_clk: Clock descriptor for the USB device block. + * @usbh_clk: Clock descriptor for the USB host block. + * @gadget: USB device. + * @driver: Driver for USB device. + * @usbd_regs: Base address of the USBD/USB20D block. + * @iudma_regs: Base address of the USBD's associated IUDMA block. + * @bep: Array of endpoints, including ep0. + * @iudma: Array of all IUDMA channels used by this controller. + * @cfg: USB configuration number, from SET_CONFIGURATION wValue. + * @iface: USB interface number, from SET_INTERFACE wIndex. + * @alt_iface: USB alt interface number, from SET_INTERFACE wValue. + * @ep0_ctrl_req: Request object for bcm63xx_udc-initiated ep0 transactions. + * @ep0_ctrl_buf: Data buffer for ep0_ctrl_req. + * @ep0state: Current state of the ep0 state machine. + * @ep0_wq: Workqueue struct used to wake up the ep0 state machine. + * @wedgemap: Bitmap of wedged endpoints. + * @ep0_req_reset: USB reset is pending. + * @ep0_req_set_cfg: Need to spoof a SET_CONFIGURATION packet. + * @ep0_req_set_iface: Need to spoof a SET_INTERFACE packet. + * @ep0_req_shutdown: Driver is shutting down; requesting ep0 to halt activity. + * @ep0_req_completed: ep0 request has completed; worker has not seen it yet. + * @ep0_reply: Pending reply from gadget driver. + * @ep0_request: Outstanding ep0 request. + */ +struct bcm63xx_udc { + spinlock_t lock; + + struct device *dev; + struct bcm63xx_usbd_platform_data *pd; + struct clk *usbd_clk; + struct clk *usbh_clk; + + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + + void __iomem *usbd_regs; + void __iomem *iudma_regs; + + struct bcm63xx_ep bep[BCM63XX_NUM_EP]; + struct iudma_ch iudma[BCM63XX_NUM_IUDMA]; + + int cfg; + int iface; + int alt_iface; + + struct bcm63xx_req ep0_ctrl_req; + u8 *ep0_ctrl_buf; + + int ep0state; + struct work_struct ep0_wq; + + unsigned long wedgemap; + + unsigned ep0_req_reset:1; + unsigned ep0_req_set_cfg:1; + unsigned ep0_req_set_iface:1; + unsigned ep0_req_shutdown:1; + + unsigned ep0_req_completed:1; + struct usb_request *ep0_reply; + struct usb_request *ep0_request; +}; + +static const struct usb_ep_ops bcm63xx_udc_ep_ops; + +/*********************************************************************** + * Convenience functions + ***********************************************************************/ + +static inline struct bcm63xx_udc *gadget_to_udc(struct usb_gadget *g) +{ + return container_of(g, struct bcm63xx_udc, gadget); +} + +static inline struct bcm63xx_ep *our_ep(struct usb_ep *ep) +{ + return container_of(ep, struct bcm63xx_ep, ep); +} + +static inline struct bcm63xx_req *our_req(struct usb_request *req) +{ + return container_of(req, struct bcm63xx_req, req); +} + +static inline u32 usbd_readl(struct bcm63xx_udc *udc, u32 off) +{ + return bcm_readl(udc->usbd_regs + off); +} + +static inline void usbd_writel(struct bcm63xx_udc *udc, u32 val, u32 off) +{ + bcm_writel(val, udc->usbd_regs + off); +} + +static inline u32 usb_dma_readl(struct bcm63xx_udc *udc, u32 off) +{ + return bcm_readl(udc->iudma_regs + off); +} + +static inline void usb_dma_writel(struct bcm63xx_udc *udc, u32 val, u32 off) +{ + bcm_writel(val, udc->iudma_regs + off); +} + +static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off, int chan) +{ + return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off + + (ENETDMA_CHAN_WIDTH * chan)); +} + +static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off, + int chan) +{ + bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off + + (ENETDMA_CHAN_WIDTH * chan)); +} + +static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off, int chan) +{ + return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off + + (ENETDMA_CHAN_WIDTH * chan)); +} + +static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off, + int chan) +{ + bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off + + (ENETDMA_CHAN_WIDTH * chan)); +} + +static inline void set_clocks(struct bcm63xx_udc *udc, bool is_enabled) +{ + if (is_enabled) { + clk_enable(udc->usbh_clk); + clk_enable(udc->usbd_clk); + udelay(10); + } else { + clk_disable(udc->usbd_clk); + clk_disable(udc->usbh_clk); + } +} + +/*********************************************************************** + * Low-level IUDMA / FIFO operations + ***********************************************************************/ + +/** + * bcm63xx_ep_dma_select - Helper function to set up the init_sel signal. + * @udc: Reference to the device controller. + * @idx: Desired init_sel value. + * + * The "init_sel" signal is used as a selection index for both endpoints + * and IUDMA channels. Since these do not map 1:1, the use of this signal + * depends on the context. + */ +static void bcm63xx_ep_dma_select(struct bcm63xx_udc *udc, int idx) +{ + u32 val = usbd_readl(udc, USBD_CONTROL_REG); + + val &= ~USBD_CONTROL_INIT_SEL_MASK; + val |= idx << USBD_CONTROL_INIT_SEL_SHIFT; + usbd_writel(udc, val, USBD_CONTROL_REG); +} + +/** + * bcm63xx_set_stall - Enable/disable stall on one endpoint. + * @udc: Reference to the device controller. + * @bep: Endpoint on which to operate. + * @is_stalled: true to enable stall, false to disable. + * + * See notes in bcm63xx_update_wedge() regarding automatic clearing of + * halt/stall conditions. + */ +static void bcm63xx_set_stall(struct bcm63xx_udc *udc, struct bcm63xx_ep *bep, + bool is_stalled) +{ + u32 val; + + val = USBD_STALL_UPDATE_MASK | + (is_stalled ? USBD_STALL_ENABLE_MASK : 0) | + (bep->ep_num << USBD_STALL_EPNUM_SHIFT); + usbd_writel(udc, val, USBD_STALL_REG); +} + +/** + * bcm63xx_fifo_setup - (Re)initialize FIFO boundaries and settings. + * @udc: Reference to the device controller. + * + * These parameters depend on the USB link speed. Settings are + * per-IUDMA-channel-pair. + */ +static void bcm63xx_fifo_setup(struct bcm63xx_udc *udc) +{ + int is_hs = udc->gadget.speed == USB_SPEED_HIGH; + u32 i, val, rx_fifo_slot, tx_fifo_slot; + + /* set up FIFO boundaries and packet sizes; this is done in pairs */ + rx_fifo_slot = tx_fifo_slot = 0; + for (i = 0; i < BCM63XX_NUM_IUDMA; i += 2) { + const struct iudma_ch_cfg *rx_cfg = &iudma_defaults[i]; + const struct iudma_ch_cfg *tx_cfg = &iudma_defaults[i + 1]; + + bcm63xx_ep_dma_select(udc, i >> 1); + + val = (rx_fifo_slot << USBD_RXFIFO_CONFIG_START_SHIFT) | + ((rx_fifo_slot + rx_cfg->n_fifo_slots - 1) << + USBD_RXFIFO_CONFIG_END_SHIFT); + rx_fifo_slot += rx_cfg->n_fifo_slots; + usbd_writel(udc, val, USBD_RXFIFO_CONFIG_REG); + usbd_writel(udc, + is_hs ? rx_cfg->max_pkt_hs : rx_cfg->max_pkt_fs, + USBD_RXFIFO_EPSIZE_REG); + + val = (tx_fifo_slot << USBD_TXFIFO_CONFIG_START_SHIFT) | + ((tx_fifo_slot + tx_cfg->n_fifo_slots - 1) << + USBD_TXFIFO_CONFIG_END_SHIFT); + tx_fifo_slot += tx_cfg->n_fifo_slots; + usbd_writel(udc, val, USBD_TXFIFO_CONFIG_REG); + usbd_writel(udc, + is_hs ? tx_cfg->max_pkt_hs : tx_cfg->max_pkt_fs, + USBD_TXFIFO_EPSIZE_REG); + + usbd_readl(udc, USBD_TXFIFO_EPSIZE_REG); + } +} + +/** + * bcm63xx_fifo_reset_ep - Flush a single endpoint's FIFO. + * @udc: Reference to the device controller. + * @ep_num: Endpoint number. + */ +static void bcm63xx_fifo_reset_ep(struct bcm63xx_udc *udc, int ep_num) +{ + u32 val; + + bcm63xx_ep_dma_select(udc, ep_num); + + val = usbd_readl(udc, USBD_CONTROL_REG); + val |= USBD_CONTROL_FIFO_RESET_MASK; + usbd_writel(udc, val, USBD_CONTROL_REG); + usbd_readl(udc, USBD_CONTROL_REG); +} + +/** + * bcm63xx_fifo_reset - Flush all hardware FIFOs. + * @udc: Reference to the device controller. + */ +static void bcm63xx_fifo_reset(struct bcm63xx_udc *udc) +{ + int i; + + for (i = 0; i < BCM63XX_NUM_FIFO_PAIRS; i++) + bcm63xx_fifo_reset_ep(udc, i); +} + +/** + * bcm63xx_ep_init - Initial (one-time) endpoint initialization. + * @udc: Reference to the device controller. + */ +static void bcm63xx_ep_init(struct bcm63xx_udc *udc) +{ + u32 i, val; + + for (i = 0; i < BCM63XX_NUM_IUDMA; i++) { + const struct iudma_ch_cfg *cfg = &iudma_defaults[i]; + + if (cfg->ep_num < 0) + continue; + + bcm63xx_ep_dma_select(udc, cfg->ep_num); + val = (cfg->ep_type << USBD_EPNUM_TYPEMAP_TYPE_SHIFT) | + ((i >> 1) << USBD_EPNUM_TYPEMAP_DMA_CH_SHIFT); + usbd_writel(udc, val, USBD_EPNUM_TYPEMAP_REG); + } +} + +/** + * bcm63xx_ep_setup - Configure per-endpoint settings. + * @udc: Reference to the device controller. + * + * This needs to be rerun if the speed/cfg/intf/altintf changes. + */ +static void bcm63xx_ep_setup(struct bcm63xx_udc *udc) +{ + u32 val, i; + + usbd_writel(udc, USBD_CSR_SETUPADDR_DEF, USBD_CSR_SETUPADDR_REG); + + for (i = 0; i < BCM63XX_NUM_IUDMA; i++) { + const struct iudma_ch_cfg *cfg = &iudma_defaults[i]; + int max_pkt = udc->gadget.speed == USB_SPEED_HIGH ? + cfg->max_pkt_hs : cfg->max_pkt_fs; + int idx = cfg->ep_num; + + udc->iudma[i].max_pkt = max_pkt; + + if (idx < 0) + continue; + usb_ep_set_maxpacket_limit(&udc->bep[idx].ep, max_pkt); + + val = (idx << USBD_CSR_EP_LOG_SHIFT) | + (cfg->dir << USBD_CSR_EP_DIR_SHIFT) | + (cfg->ep_type << USBD_CSR_EP_TYPE_SHIFT) | + (udc->cfg << USBD_CSR_EP_CFG_SHIFT) | + (udc->iface << USBD_CSR_EP_IFACE_SHIFT) | + (udc->alt_iface << USBD_CSR_EP_ALTIFACE_SHIFT) | + (max_pkt << USBD_CSR_EP_MAXPKT_SHIFT); + usbd_writel(udc, val, USBD_CSR_EP_REG(idx)); + } +} + +/** + * iudma_write - Queue a single IUDMA transaction. + * @udc: Reference to the device controller. + * @iudma: IUDMA channel to use. + * @breq: Request containing the transaction data. + * + * For RX IUDMA, this will queue a single buffer descriptor, as RX IUDMA + * does not honor SOP/EOP so the handling of multiple buffers is ambiguous. + * So iudma_write() may be called several times to fulfill a single + * usb_request. + * + * For TX IUDMA, this can queue multiple buffer descriptors if needed. + */ +static void iudma_write(struct bcm63xx_udc *udc, struct iudma_ch *iudma, + struct bcm63xx_req *breq) +{ + int first_bd = 1, last_bd = 0, extra_zero_pkt = 0; + unsigned int bytes_left = breq->req.length - breq->offset; + const int max_bd_bytes = !irq_coalesce && !iudma->is_tx ? + iudma->max_pkt : IUDMA_MAX_FRAGMENT; + + iudma->n_bds_used = 0; + breq->bd_bytes = 0; + breq->iudma = iudma; + + if ((bytes_left % iudma->max_pkt == 0) && bytes_left && breq->req.zero) + extra_zero_pkt = 1; + + do { + struct bcm_enet_desc *d = iudma->write_bd; + u32 dmaflags = 0; + unsigned int n_bytes; + + if (d == iudma->end_bd) { + dmaflags |= DMADESC_WRAP_MASK; + iudma->write_bd = iudma->bd_ring; + } else { + iudma->write_bd++; + } + iudma->n_bds_used++; + + n_bytes = min_t(int, bytes_left, max_bd_bytes); + if (n_bytes) + dmaflags |= n_bytes << DMADESC_LENGTH_SHIFT; + else + dmaflags |= (1 << DMADESC_LENGTH_SHIFT) | + DMADESC_USB_ZERO_MASK; + + dmaflags |= DMADESC_OWNER_MASK; + if (first_bd) { + dmaflags |= DMADESC_SOP_MASK; + first_bd = 0; + } + + /* + * extra_zero_pkt forces one more iteration through the loop + * after all data is queued up, to send the zero packet + */ + if (extra_zero_pkt && !bytes_left) + extra_zero_pkt = 0; + + if (!iudma->is_tx || iudma->n_bds_used == iudma->n_bds || + (n_bytes == bytes_left && !extra_zero_pkt)) { + last_bd = 1; + dmaflags |= DMADESC_EOP_MASK; + } + + d->address = breq->req.dma + breq->offset; + mb(); + d->len_stat = dmaflags; + + breq->offset += n_bytes; + breq->bd_bytes += n_bytes; + bytes_left -= n_bytes; + } while (!last_bd); + + usb_dmac_writel(udc, ENETDMAC_CHANCFG_EN_MASK, + ENETDMAC_CHANCFG_REG, iudma->ch_idx); +} + +/** + * iudma_read - Check for IUDMA buffer completion. + * @udc: Reference to the device controller. + * @iudma: IUDMA channel to use. + * + * This checks to see if ALL of the outstanding BDs on the DMA channel + * have been filled. If so, it returns the actual transfer length; + * otherwise it returns -EBUSY. + */ +static int iudma_read(struct bcm63xx_udc *udc, struct iudma_ch *iudma) +{ + int i, actual_len = 0; + struct bcm_enet_desc *d = iudma->read_bd; + + if (!iudma->n_bds_used) + return -EINVAL; + + for (i = 0; i < iudma->n_bds_used; i++) { + u32 dmaflags; + + dmaflags = d->len_stat; + + if (dmaflags & DMADESC_OWNER_MASK) + return -EBUSY; + + actual_len += (dmaflags & DMADESC_LENGTH_MASK) >> + DMADESC_LENGTH_SHIFT; + if (d == iudma->end_bd) + d = iudma->bd_ring; + else + d++; + } + + iudma->read_bd = d; + iudma->n_bds_used = 0; + return actual_len; +} + +/** + * iudma_reset_channel - Stop DMA on a single channel. + * @udc: Reference to the device controller. + * @iudma: IUDMA channel to reset. + */ +static void iudma_reset_channel(struct bcm63xx_udc *udc, struct iudma_ch *iudma) +{ + int timeout = IUDMA_RESET_TIMEOUT_US; + struct bcm_enet_desc *d; + int ch_idx = iudma->ch_idx; + + if (!iudma->is_tx) + bcm63xx_fifo_reset_ep(udc, max(0, iudma->ep_num)); + + /* stop DMA, then wait for the hardware to wrap up */ + usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG, ch_idx); + + while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx) & + ENETDMAC_CHANCFG_EN_MASK) { + udelay(1); + + /* repeatedly flush the FIFO data until the BD completes */ + if (iudma->is_tx && iudma->ep_num >= 0) + bcm63xx_fifo_reset_ep(udc, iudma->ep_num); + + if (!timeout--) { + dev_err(udc->dev, "can't reset IUDMA channel %d\n", + ch_idx); + break; + } + if (timeout == IUDMA_RESET_TIMEOUT_US / 2) { + dev_warn(udc->dev, "forcibly halting IUDMA channel %d\n", + ch_idx); + usb_dmac_writel(udc, ENETDMAC_CHANCFG_BUFHALT_MASK, + ENETDMAC_CHANCFG_REG, ch_idx); + } + } + usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG, ch_idx); + + /* don't leave "live" HW-owned entries for the next guy to step on */ + for (d = iudma->bd_ring; d <= iudma->end_bd; d++) + d->len_stat = 0; + mb(); + + iudma->read_bd = iudma->write_bd = iudma->bd_ring; + iudma->n_bds_used = 0; + + /* set up IRQs, UBUS burst size, and BD base for this channel */ + usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK, + ENETDMAC_IRMASK_REG, ch_idx); + usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG, ch_idx); + + usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG, ch_idx); + usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG, ch_idx); +} + +/** + * iudma_init_channel - One-time IUDMA channel initialization. + * @udc: Reference to the device controller. + * @ch_idx: Channel to initialize. + */ +static int iudma_init_channel(struct bcm63xx_udc *udc, unsigned int ch_idx) +{ + struct iudma_ch *iudma = &udc->iudma[ch_idx]; + const struct iudma_ch_cfg *cfg = &iudma_defaults[ch_idx]; + unsigned int n_bds = cfg->n_bds; + struct bcm63xx_ep *bep = NULL; + + iudma->ep_num = cfg->ep_num; + iudma->ch_idx = ch_idx; + iudma->is_tx = !!(ch_idx & 0x01); + if (iudma->ep_num >= 0) { + bep = &udc->bep[iudma->ep_num]; + bep->iudma = iudma; + INIT_LIST_HEAD(&bep->queue); + } + + iudma->bep = bep; + iudma->udc = udc; + + /* ep0 is always active; others are controlled by the gadget driver */ + if (iudma->ep_num <= 0) + iudma->enabled = true; + + iudma->n_bds = n_bds; + iudma->bd_ring = dmam_alloc_coherent(udc->dev, + n_bds * sizeof(struct bcm_enet_desc), + &iudma->bd_ring_dma, GFP_KERNEL); + if (!iudma->bd_ring) + return -ENOMEM; + iudma->end_bd = &iudma->bd_ring[n_bds - 1]; + + return 0; +} + +/** + * iudma_init - One-time initialization of all IUDMA channels. + * @udc: Reference to the device controller. + * + * Enable DMA, flush channels, and enable global IUDMA IRQs. + */ +static int iudma_init(struct bcm63xx_udc *udc) +{ + int i, rc; + + usb_dma_writel(udc, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG); + + for (i = 0; i < BCM63XX_NUM_IUDMA; i++) { + rc = iudma_init_channel(udc, i); + if (rc) + return rc; + iudma_reset_channel(udc, &udc->iudma[i]); + } + + usb_dma_writel(udc, BIT(BCM63XX_NUM_IUDMA)-1, ENETDMA_GLB_IRQMASK_REG); + return 0; +} + +/** + * iudma_uninit - Uninitialize IUDMA channels. + * @udc: Reference to the device controller. + * + * Kill global IUDMA IRQs, flush channels, and kill DMA. + */ +static void iudma_uninit(struct bcm63xx_udc *udc) +{ + int i; + + usb_dma_writel(udc, 0, ENETDMA_GLB_IRQMASK_REG); + + for (i = 0; i < BCM63XX_NUM_IUDMA; i++) + iudma_reset_channel(udc, &udc->iudma[i]); + + usb_dma_writel(udc, 0, ENETDMA_CFG_REG); +} + +/*********************************************************************** + * Other low-level USBD operations + ***********************************************************************/ + +/** + * bcm63xx_set_ctrl_irqs - Mask/unmask control path interrupts. + * @udc: Reference to the device controller. + * @enable_irqs: true to enable, false to disable. + */ +static void bcm63xx_set_ctrl_irqs(struct bcm63xx_udc *udc, bool enable_irqs) +{ + u32 val; + + usbd_writel(udc, 0, USBD_STATUS_REG); + + val = BIT(USBD_EVENT_IRQ_USB_RESET) | + BIT(USBD_EVENT_IRQ_SETUP) | + BIT(USBD_EVENT_IRQ_SETCFG) | + BIT(USBD_EVENT_IRQ_SETINTF) | + BIT(USBD_EVENT_IRQ_USB_LINK); + usbd_writel(udc, enable_irqs ? val : 0, USBD_EVENT_IRQ_MASK_REG); + usbd_writel(udc, val, USBD_EVENT_IRQ_STATUS_REG); +} + +/** + * bcm63xx_select_phy_mode - Select between USB device and host mode. + * @udc: Reference to the device controller. + * @is_device: true for device, false for host. + * + * This should probably be reworked to use the drivers/usb/otg + * infrastructure. + * + * By default, the AFE/pullups are disabled in device mode, until + * bcm63xx_select_pullup() is called. + */ +static void bcm63xx_select_phy_mode(struct bcm63xx_udc *udc, bool is_device) +{ + u32 val, portmask = BIT(udc->pd->port_no); + + if (BCMCPU_IS_6328()) { + /* configure pinmux to sense VBUS signal */ + val = bcm_gpio_readl(GPIO_PINMUX_OTHR_REG); + val &= ~GPIO_PINMUX_OTHR_6328_USB_MASK; + val |= is_device ? GPIO_PINMUX_OTHR_6328_USB_DEV : + GPIO_PINMUX_OTHR_6328_USB_HOST; + bcm_gpio_writel(val, GPIO_PINMUX_OTHR_REG); + } + + val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG); + if (is_device) { + val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT); + val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); + } else { + val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT); + val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); + } + bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG); + + val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG); + if (is_device) + val |= USBH_PRIV_SWAP_USBD_MASK; + else + val &= ~USBH_PRIV_SWAP_USBD_MASK; + bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG); +} + +/** + * bcm63xx_select_pullup - Enable/disable the pullup on D+ + * @udc: Reference to the device controller. + * @is_on: true to enable the pullup, false to disable. + * + * If the pullup is active, the host will sense a FS/HS device connected to + * the port. If the pullup is inactive, the host will think the USB + * device has been disconnected. + */ +static void bcm63xx_select_pullup(struct bcm63xx_udc *udc, bool is_on) +{ + u32 val, portmask = BIT(udc->pd->port_no); + + val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG); + if (is_on) + val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); + else + val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); + bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG); +} + +/** + * bcm63xx_uninit_udc_hw - Shut down the hardware prior to driver removal. + * @udc: Reference to the device controller. + * + * This just masks the IUDMA IRQs and releases the clocks. It is assumed + * that bcm63xx_udc_stop() has already run, and the clocks are stopped. + */ +static void bcm63xx_uninit_udc_hw(struct bcm63xx_udc *udc) +{ + set_clocks(udc, true); + iudma_uninit(udc); + set_clocks(udc, false); + + clk_put(udc->usbd_clk); + clk_put(udc->usbh_clk); +} + +/** + * bcm63xx_init_udc_hw - Initialize the controller hardware and data structures. + * @udc: Reference to the device controller. + */ +static int bcm63xx_init_udc_hw(struct bcm63xx_udc *udc) +{ + int i, rc = 0; + u32 val; + + udc->ep0_ctrl_buf = devm_kzalloc(udc->dev, BCM63XX_MAX_CTRL_PKT, + GFP_KERNEL); + if (!udc->ep0_ctrl_buf) + return -ENOMEM; + + INIT_LIST_HEAD(&udc->gadget.ep_list); + for (i = 0; i < BCM63XX_NUM_EP; i++) { + struct bcm63xx_ep *bep = &udc->bep[i]; + + bep->ep.name = bcm63xx_ep_info[i].name; + bep->ep.caps = bcm63xx_ep_info[i].caps; + bep->ep_num = i; + bep->ep.ops = &bcm63xx_udc_ep_ops; + list_add_tail(&bep->ep.ep_list, &udc->gadget.ep_list); + bep->halted = 0; + usb_ep_set_maxpacket_limit(&bep->ep, BCM63XX_MAX_CTRL_PKT); + bep->udc = udc; + bep->ep.desc = NULL; + INIT_LIST_HEAD(&bep->queue); + } + + udc->gadget.ep0 = &udc->bep[0].ep; + list_del(&udc->bep[0].ep.ep_list); + + udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->ep0state = EP0_SHUTDOWN; + + udc->usbh_clk = clk_get(udc->dev, "usbh"); + if (IS_ERR(udc->usbh_clk)) + return -EIO; + + udc->usbd_clk = clk_get(udc->dev, "usbd"); + if (IS_ERR(udc->usbd_clk)) { + clk_put(udc->usbh_clk); + return -EIO; + } + + set_clocks(udc, true); + + val = USBD_CONTROL_AUTO_CSRS_MASK | + USBD_CONTROL_DONE_CSRS_MASK | + (irq_coalesce ? USBD_CONTROL_RXZSCFG_MASK : 0); + usbd_writel(udc, val, USBD_CONTROL_REG); + + val = USBD_STRAPS_APP_SELF_PWR_MASK | + USBD_STRAPS_APP_RAM_IF_MASK | + USBD_STRAPS_APP_CSRPRGSUP_MASK | + USBD_STRAPS_APP_8BITPHY_MASK | + USBD_STRAPS_APP_RMTWKUP_MASK; + + if (udc->gadget.max_speed == USB_SPEED_HIGH) + val |= (BCM63XX_SPD_HIGH << USBD_STRAPS_SPEED_SHIFT); + else + val |= (BCM63XX_SPD_FULL << USBD_STRAPS_SPEED_SHIFT); + usbd_writel(udc, val, USBD_STRAPS_REG); + + bcm63xx_set_ctrl_irqs(udc, false); + + usbd_writel(udc, 0, USBD_EVENT_IRQ_CFG_LO_REG); + + val = USBD_EVENT_IRQ_CFG_FALLING(USBD_EVENT_IRQ_ENUM_ON) | + USBD_EVENT_IRQ_CFG_FALLING(USBD_EVENT_IRQ_SET_CSRS); + usbd_writel(udc, val, USBD_EVENT_IRQ_CFG_HI_REG); + + rc = iudma_init(udc); + set_clocks(udc, false); + if (rc) + bcm63xx_uninit_udc_hw(udc); + + return 0; +} + +/*********************************************************************** + * Standard EP gadget operations + ***********************************************************************/ + +/** + * bcm63xx_ep_enable - Enable one endpoint. + * @ep: Endpoint to enable. + * @desc: Contains max packet, direction, etc. + * + * Most of the endpoint parameters are fixed in this controller, so there + * isn't much for this function to do. + */ +static int bcm63xx_ep_enable(struct usb_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + struct bcm63xx_ep *bep = our_ep(ep); + struct bcm63xx_udc *udc = bep->udc; + struct iudma_ch *iudma = bep->iudma; + unsigned long flags; + + if (!ep || !desc || ep->name == bcm63xx_ep0name) + return -EINVAL; + + if (!udc->driver) + return -ESHUTDOWN; + + spin_lock_irqsave(&udc->lock, flags); + if (iudma->enabled) { + spin_unlock_irqrestore(&udc->lock, flags); + return -EINVAL; + } + + iudma->enabled = true; + BUG_ON(!list_empty(&bep->queue)); + + iudma_reset_channel(udc, iudma); + + bep->halted = 0; + bcm63xx_set_stall(udc, bep, false); + clear_bit(bep->ep_num, &udc->wedgemap); + + ep->desc = desc; + ep->maxpacket = usb_endpoint_maxp(desc); + + spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} + +/** + * bcm63xx_ep_disable - Disable one endpoint. + * @ep: Endpoint to disable. + */ +static int bcm63xx_ep_disable(struct usb_ep *ep) +{ + struct bcm63xx_ep *bep = our_ep(ep); + struct bcm63xx_udc *udc = bep->udc; + struct iudma_ch *iudma = bep->iudma; + struct bcm63xx_req *breq, *n; + unsigned long flags; + + if (!ep || !ep->desc) + return -EINVAL; + + spin_lock_irqsave(&udc->lock, flags); + if (!iudma->enabled) { + spin_unlock_irqrestore(&udc->lock, flags); + return -EINVAL; + } + iudma->enabled = false; + + iudma_reset_channel(udc, iudma); + + if (!list_empty(&bep->queue)) { + list_for_each_entry_safe(breq, n, &bep->queue, queue) { + usb_gadget_unmap_request(&udc->gadget, &breq->req, + iudma->is_tx); + list_del(&breq->queue); + breq->req.status = -ESHUTDOWN; + + spin_unlock_irqrestore(&udc->lock, flags); + usb_gadget_giveback_request(&iudma->bep->ep, &breq->req); + spin_lock_irqsave(&udc->lock, flags); + } + } + ep->desc = NULL; + + spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} + +/** + * bcm63xx_udc_alloc_request - Allocate a new request. + * @ep: Endpoint associated with the request. + * @mem_flags: Flags to pass to kzalloc(). + */ +static struct usb_request *bcm63xx_udc_alloc_request(struct usb_ep *ep, + gfp_t mem_flags) +{ + struct bcm63xx_req *breq; + + breq = kzalloc(sizeof(*breq), mem_flags); + if (!breq) + return NULL; + return &breq->req; +} + +/** + * bcm63xx_udc_free_request - Free a request. + * @ep: Endpoint associated with the request. + * @req: Request to free. + */ +static void bcm63xx_udc_free_request(struct usb_ep *ep, + struct usb_request *req) +{ + struct bcm63xx_req *breq = our_req(req); + kfree(breq); +} + +/** + * bcm63xx_udc_queue - Queue up a new request. + * @ep: Endpoint associated with the request. + * @req: Request to add. + * @mem_flags: Unused. + * + * If the queue is empty, start this request immediately. Otherwise, add + * it to the list. + * + * ep0 replies are sent through this function from the gadget driver, but + * they are treated differently because they need to be handled by the ep0 + * state machine. (Sometimes they are replies to control requests that + * were spoofed by this driver, and so they shouldn't be transmitted at all.) + */ +static int bcm63xx_udc_queue(struct usb_ep *ep, struct usb_request *req, + gfp_t mem_flags) +{ + struct bcm63xx_ep *bep = our_ep(ep); + struct bcm63xx_udc *udc = bep->udc; + struct bcm63xx_req *breq = our_req(req); + unsigned long flags; + int rc = 0; + + if (unlikely(!req || !req->complete || !req->buf || !ep)) + return -EINVAL; + + req->actual = 0; + req->status = 0; + breq->offset = 0; + + if (bep == &udc->bep[0]) { + /* only one reply per request, please */ + if (udc->ep0_reply) + return -EINVAL; + + udc->ep0_reply = req; + schedule_work(&udc->ep0_wq); + return 0; + } + + spin_lock_irqsave(&udc->lock, flags); + if (!bep->iudma->enabled) { + rc = -ESHUTDOWN; + goto out; + } + + rc = usb_gadget_map_request(&udc->gadget, req, bep->iudma->is_tx); + if (rc == 0) { + list_add_tail(&breq->queue, &bep->queue); + if (list_is_singular(&bep->queue)) + iudma_write(udc, bep->iudma, breq); + } + +out: + spin_unlock_irqrestore(&udc->lock, flags); + return rc; +} + +/** + * bcm63xx_udc_dequeue - Remove a pending request from the queue. + * @ep: Endpoint associated with the request. + * @req: Request to remove. + * + * If the request is not at the head of the queue, this is easy - just nuke + * it. If the request is at the head of the queue, we'll need to stop the + * DMA transaction and then queue up the successor. + */ +static int bcm63xx_udc_dequeue(struct usb_ep *ep, struct usb_request *req) +{ + struct bcm63xx_ep *bep = our_ep(ep); + struct bcm63xx_udc *udc = bep->udc; + struct bcm63xx_req *breq = our_req(req), *cur; + unsigned long flags; + int rc = 0; + + spin_lock_irqsave(&udc->lock, flags); + if (list_empty(&bep->queue)) { + rc = -EINVAL; + goto out; + } + + cur = list_first_entry(&bep->queue, struct bcm63xx_req, queue); + usb_gadget_unmap_request(&udc->gadget, &breq->req, bep->iudma->is_tx); + + if (breq == cur) { + iudma_reset_channel(udc, bep->iudma); + list_del(&breq->queue); + + if (!list_empty(&bep->queue)) { + struct bcm63xx_req *next; + + next = list_first_entry(&bep->queue, + struct bcm63xx_req, queue); + iudma_write(udc, bep->iudma, next); + } + } else { + list_del(&breq->queue); + } + +out: + spin_unlock_irqrestore(&udc->lock, flags); + + req->status = -ESHUTDOWN; + req->complete(ep, req); + + return rc; +} + +/** + * bcm63xx_udc_set_halt - Enable/disable STALL flag in the hardware. + * @ep: Endpoint to halt. + * @value: Zero to clear halt; nonzero to set halt. + * + * See comments in bcm63xx_update_wedge(). + */ +static int bcm63xx_udc_set_halt(struct usb_ep *ep, int value) +{ + struct bcm63xx_ep *bep = our_ep(ep); + struct bcm63xx_udc *udc = bep->udc; + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + bcm63xx_set_stall(udc, bep, !!value); + bep->halted = value; + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +/** + * bcm63xx_udc_set_wedge - Stall the endpoint until the next reset. + * @ep: Endpoint to wedge. + * + * See comments in bcm63xx_update_wedge(). + */ +static int bcm63xx_udc_set_wedge(struct usb_ep *ep) +{ + struct bcm63xx_ep *bep = our_ep(ep); + struct bcm63xx_udc *udc = bep->udc; + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + set_bit(bep->ep_num, &udc->wedgemap); + bcm63xx_set_stall(udc, bep, true); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static const struct usb_ep_ops bcm63xx_udc_ep_ops = { + .enable = bcm63xx_ep_enable, + .disable = bcm63xx_ep_disable, + + .alloc_request = bcm63xx_udc_alloc_request, + .free_request = bcm63xx_udc_free_request, + + .queue = bcm63xx_udc_queue, + .dequeue = bcm63xx_udc_dequeue, + + .set_halt = bcm63xx_udc_set_halt, + .set_wedge = bcm63xx_udc_set_wedge, +}; + +/*********************************************************************** + * EP0 handling + ***********************************************************************/ + +/** + * bcm63xx_ep0_setup_callback - Drop spinlock to invoke ->setup callback. + * @udc: Reference to the device controller. + * @ctrl: 8-byte SETUP request. + */ +static int bcm63xx_ep0_setup_callback(struct bcm63xx_udc *udc, + struct usb_ctrlrequest *ctrl) +{ + int rc; + + spin_unlock_irq(&udc->lock); + rc = udc->driver->setup(&udc->gadget, ctrl); + spin_lock_irq(&udc->lock); + return rc; +} + +/** + * bcm63xx_ep0_spoof_set_cfg - Synthesize a SET_CONFIGURATION request. + * @udc: Reference to the device controller. + * + * Many standard requests are handled automatically in the hardware, but + * we still need to pass them to the gadget driver so that it can + * reconfigure the interfaces/endpoints if necessary. + * + * Unfortunately we are not able to send a STALL response if the host + * requests an invalid configuration. If this happens, we'll have to be + * content with printing a warning. + */ +static int bcm63xx_ep0_spoof_set_cfg(struct bcm63xx_udc *udc) +{ + struct usb_ctrlrequest ctrl; + int rc; + + ctrl.bRequestType = USB_DIR_OUT | USB_RECIP_DEVICE; + ctrl.bRequest = USB_REQ_SET_CONFIGURATION; + ctrl.wValue = cpu_to_le16(udc->cfg); + ctrl.wIndex = 0; + ctrl.wLength = 0; + + rc = bcm63xx_ep0_setup_callback(udc, &ctrl); + if (rc < 0) { + dev_warn_ratelimited(udc->dev, + "hardware auto-acked bad SET_CONFIGURATION(%d) request\n", + udc->cfg); + } + return rc; +} + +/** + * bcm63xx_ep0_spoof_set_iface - Synthesize a SET_INTERFACE request. + * @udc: Reference to the device controller. + */ +static int bcm63xx_ep0_spoof_set_iface(struct bcm63xx_udc *udc) +{ + struct usb_ctrlrequest ctrl; + int rc; + + ctrl.bRequestType = USB_DIR_OUT | USB_RECIP_INTERFACE; + ctrl.bRequest = USB_REQ_SET_INTERFACE; + ctrl.wValue = cpu_to_le16(udc->alt_iface); + ctrl.wIndex = cpu_to_le16(udc->iface); + ctrl.wLength = 0; + + rc = bcm63xx_ep0_setup_callback(udc, &ctrl); + if (rc < 0) { + dev_warn_ratelimited(udc->dev, + "hardware auto-acked bad SET_INTERFACE(%d,%d) request\n", + udc->iface, udc->alt_iface); + } + return rc; +} + +/** + * bcm63xx_ep0_map_write - dma_map and iudma_write a single request. + * @udc: Reference to the device controller. + * @ch_idx: IUDMA channel number. + * @req: USB gadget layer representation of the request. + */ +static void bcm63xx_ep0_map_write(struct bcm63xx_udc *udc, int ch_idx, + struct usb_request *req) +{ + struct bcm63xx_req *breq = our_req(req); + struct iudma_ch *iudma = &udc->iudma[ch_idx]; + + BUG_ON(udc->ep0_request); + udc->ep0_request = req; + + req->actual = 0; + breq->offset = 0; + usb_gadget_map_request(&udc->gadget, req, iudma->is_tx); + iudma_write(udc, iudma, breq); +} + +/** + * bcm63xx_ep0_complete - Set completion status and "stage" the callback. + * @udc: Reference to the device controller. + * @req: USB gadget layer representation of the request. + * @status: Status to return to the gadget driver. + */ +static void bcm63xx_ep0_complete(struct bcm63xx_udc *udc, + struct usb_request *req, int status) +{ + req->status = status; + if (status) + req->actual = 0; + if (req->complete) { + spin_unlock_irq(&udc->lock); + req->complete(&udc->bep[0].ep, req); + spin_lock_irq(&udc->lock); + } +} + +/** + * bcm63xx_ep0_nuke_reply - Abort request from the gadget driver due to + * reset/shutdown. + * @udc: Reference to the device controller. + * @is_tx: Nonzero for TX (IN), zero for RX (OUT). + */ +static void bcm63xx_ep0_nuke_reply(struct bcm63xx_udc *udc, int is_tx) +{ + struct usb_request *req = udc->ep0_reply; + + udc->ep0_reply = NULL; + usb_gadget_unmap_request(&udc->gadget, req, is_tx); + if (udc->ep0_request == req) { + udc->ep0_req_completed = 0; + udc->ep0_request = NULL; + } + bcm63xx_ep0_complete(udc, req, -ESHUTDOWN); +} + +/** + * bcm63xx_ep0_read_complete - Close out the pending ep0 request; return + * transfer len. + * @udc: Reference to the device controller. + */ +static int bcm63xx_ep0_read_complete(struct bcm63xx_udc *udc) +{ + struct usb_request *req = udc->ep0_request; + + udc->ep0_req_completed = 0; + udc->ep0_request = NULL; + + return req->actual; +} + +/** + * bcm63xx_ep0_internal_request - Helper function to submit an ep0 request. + * @udc: Reference to the device controller. + * @ch_idx: IUDMA channel number. + * @length: Number of bytes to TX/RX. + * + * Used for simple transfers performed by the ep0 worker. This will always + * use ep0_ctrl_req / ep0_ctrl_buf. + */ +static void bcm63xx_ep0_internal_request(struct bcm63xx_udc *udc, int ch_idx, + int length) +{ + struct usb_request *req = &udc->ep0_ctrl_req.req; + + req->buf = udc->ep0_ctrl_buf; + req->length = length; + req->complete = NULL; + + bcm63xx_ep0_map_write(udc, ch_idx, req); +} + +/** + * bcm63xx_ep0_do_setup - Parse new SETUP packet and decide how to handle it. + * @udc: Reference to the device controller. + * + * EP0_IDLE probably shouldn't ever happen. EP0_REQUEUE means we're ready + * for the next packet. Anything else means the transaction requires multiple + * stages of handling. + */ +static enum bcm63xx_ep0_state bcm63xx_ep0_do_setup(struct bcm63xx_udc *udc) +{ + int rc; + struct usb_ctrlrequest *ctrl = (void *)udc->ep0_ctrl_buf; + + rc = bcm63xx_ep0_read_complete(udc); + + if (rc < 0) { + dev_err(udc->dev, "missing SETUP packet\n"); + return EP0_IDLE; + } + + /* + * Handle 0-byte IN STATUS acknowledgement. The hardware doesn't + * ALWAYS deliver these 100% of the time, so if we happen to see one, + * just throw it away. + */ + if (rc == 0) + return EP0_REQUEUE; + + /* Drop malformed SETUP packets */ + if (rc != sizeof(*ctrl)) { + dev_warn_ratelimited(udc->dev, + "malformed SETUP packet (%d bytes)\n", rc); + return EP0_REQUEUE; + } + + /* Process new SETUP packet arriving on ep0 */ + rc = bcm63xx_ep0_setup_callback(udc, ctrl); + if (rc < 0) { + bcm63xx_set_stall(udc, &udc->bep[0], true); + return EP0_REQUEUE; + } + + if (!ctrl->wLength) + return EP0_REQUEUE; + else if (ctrl->bRequestType & USB_DIR_IN) + return EP0_IN_DATA_PHASE_SETUP; + else + return EP0_OUT_DATA_PHASE_SETUP; +} + +/** + * bcm63xx_ep0_do_idle - Check for outstanding requests if ep0 is idle. + * @udc: Reference to the device controller. + * + * In state EP0_IDLE, the RX descriptor is either pending, or has been + * filled with a SETUP packet from the host. This function handles new + * SETUP packets, control IRQ events (which can generate fake SETUP packets), + * and reset/shutdown events. + * + * Returns 0 if work was done; -EAGAIN if nothing to do. + */ +static int bcm63xx_ep0_do_idle(struct bcm63xx_udc *udc) +{ + if (udc->ep0_req_reset) { + udc->ep0_req_reset = 0; + } else if (udc->ep0_req_set_cfg) { + udc->ep0_req_set_cfg = 0; + if (bcm63xx_ep0_spoof_set_cfg(udc) >= 0) + udc->ep0state = EP0_IN_FAKE_STATUS_PHASE; + } else if (udc->ep0_req_set_iface) { + udc->ep0_req_set_iface = 0; + if (bcm63xx_ep0_spoof_set_iface(udc) >= 0) + udc->ep0state = EP0_IN_FAKE_STATUS_PHASE; + } else if (udc->ep0_req_completed) { + udc->ep0state = bcm63xx_ep0_do_setup(udc); + return udc->ep0state == EP0_IDLE ? -EAGAIN : 0; + } else if (udc->ep0_req_shutdown) { + udc->ep0_req_shutdown = 0; + udc->ep0_req_completed = 0; + udc->ep0_request = NULL; + iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_RXCHAN]); + usb_gadget_unmap_request(&udc->gadget, + &udc->ep0_ctrl_req.req, 0); + + /* bcm63xx_udc_pullup() is waiting for this */ + mb(); + udc->ep0state = EP0_SHUTDOWN; + } else if (udc->ep0_reply) { + /* + * This could happen if a USB RESET shows up during an ep0 + * transaction (especially if a laggy driver like gadgetfs + * is in use). + */ + dev_warn(udc->dev, "nuking unexpected reply\n"); + bcm63xx_ep0_nuke_reply(udc, 0); + } else { + return -EAGAIN; + } + + return 0; +} + +/** + * bcm63xx_ep0_one_round - Handle the current ep0 state. + * @udc: Reference to the device controller. + * + * Returns 0 if work was done; -EAGAIN if nothing to do. + */ +static int bcm63xx_ep0_one_round(struct bcm63xx_udc *udc) +{ + enum bcm63xx_ep0_state ep0state = udc->ep0state; + bool shutdown = udc->ep0_req_reset || udc->ep0_req_shutdown; + + switch (udc->ep0state) { + case EP0_REQUEUE: + /* set up descriptor to receive SETUP packet */ + bcm63xx_ep0_internal_request(udc, IUDMA_EP0_RXCHAN, + BCM63XX_MAX_CTRL_PKT); + ep0state = EP0_IDLE; + break; + case EP0_IDLE: + return bcm63xx_ep0_do_idle(udc); + case EP0_IN_DATA_PHASE_SETUP: + /* + * Normal case: TX request is in ep0_reply (queued by the + * callback), or will be queued shortly. When it's here, + * send it to the HW and go to EP0_IN_DATA_PHASE_COMPLETE. + * + * Shutdown case: Stop waiting for the reply. Just + * REQUEUE->IDLE. The gadget driver is NOT expected to + * queue anything else now. + */ + if (udc->ep0_reply) { + bcm63xx_ep0_map_write(udc, IUDMA_EP0_TXCHAN, + udc->ep0_reply); + ep0state = EP0_IN_DATA_PHASE_COMPLETE; + } else if (shutdown) { + ep0state = EP0_REQUEUE; + } + break; + case EP0_IN_DATA_PHASE_COMPLETE: { + /* + * Normal case: TX packet (ep0_reply) is in flight; wait for + * it to finish, then go back to REQUEUE->IDLE. + * + * Shutdown case: Reset the TX channel, send -ESHUTDOWN + * completion to the gadget driver, then REQUEUE->IDLE. + */ + if (udc->ep0_req_completed) { + udc->ep0_reply = NULL; + bcm63xx_ep0_read_complete(udc); + /* + * the "ack" sometimes gets eaten (see + * bcm63xx_ep0_do_idle) + */ + ep0state = EP0_REQUEUE; + } else if (shutdown) { + iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_TXCHAN]); + bcm63xx_ep0_nuke_reply(udc, 1); + ep0state = EP0_REQUEUE; + } + break; + } + case EP0_OUT_DATA_PHASE_SETUP: + /* Similar behavior to EP0_IN_DATA_PHASE_SETUP */ + if (udc->ep0_reply) { + bcm63xx_ep0_map_write(udc, IUDMA_EP0_RXCHAN, + udc->ep0_reply); + ep0state = EP0_OUT_DATA_PHASE_COMPLETE; + } else if (shutdown) { + ep0state = EP0_REQUEUE; + } + break; + case EP0_OUT_DATA_PHASE_COMPLETE: { + /* Similar behavior to EP0_IN_DATA_PHASE_COMPLETE */ + if (udc->ep0_req_completed) { + udc->ep0_reply = NULL; + bcm63xx_ep0_read_complete(udc); + + /* send 0-byte ack to host */ + bcm63xx_ep0_internal_request(udc, IUDMA_EP0_TXCHAN, 0); + ep0state = EP0_OUT_STATUS_PHASE; + } else if (shutdown) { + iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_RXCHAN]); + bcm63xx_ep0_nuke_reply(udc, 0); + ep0state = EP0_REQUEUE; + } + break; + } + case EP0_OUT_STATUS_PHASE: + /* + * Normal case: 0-byte OUT ack packet is in flight; wait + * for it to finish, then go back to REQUEUE->IDLE. + * + * Shutdown case: just cancel the transmission. Don't bother + * calling the completion, because it originated from this + * function anyway. Then go back to REQUEUE->IDLE. + */ + if (udc->ep0_req_completed) { + bcm63xx_ep0_read_complete(udc); + ep0state = EP0_REQUEUE; + } else if (shutdown) { + iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_TXCHAN]); + udc->ep0_request = NULL; + ep0state = EP0_REQUEUE; + } + break; + case EP0_IN_FAKE_STATUS_PHASE: { + /* + * Normal case: we spoofed a SETUP packet and are now + * waiting for the gadget driver to send a 0-byte reply. + * This doesn't actually get sent to the HW because the + * HW has already sent its own reply. Once we get the + * response, return to IDLE. + * + * Shutdown case: return to IDLE immediately. + * + * Note that the ep0 RX descriptor has remained queued + * (and possibly unfilled) during this entire transaction. + * The HW datapath (IUDMA) never even sees SET_CONFIGURATION + * or SET_INTERFACE transactions. + */ + struct usb_request *r = udc->ep0_reply; + + if (!r) { + if (shutdown) + ep0state = EP0_IDLE; + break; + } + + bcm63xx_ep0_complete(udc, r, 0); + udc->ep0_reply = NULL; + ep0state = EP0_IDLE; + break; + } + case EP0_SHUTDOWN: + break; + } + + if (udc->ep0state == ep0state) + return -EAGAIN; + + udc->ep0state = ep0state; + return 0; +} + +/** + * bcm63xx_ep0_process - ep0 worker thread / state machine. + * @w: Workqueue struct. + * + * bcm63xx_ep0_process is triggered any time an event occurs on ep0. It + * is used to synchronize ep0 events and ensure that both HW and SW events + * occur in a well-defined order. When the ep0 IUDMA queues are idle, it may + * synthesize SET_CONFIGURATION / SET_INTERFACE requests that were consumed + * by the USBD hardware. + * + * The worker function will continue iterating around the state machine + * until there is nothing left to do. Usually "nothing left to do" means + * that we're waiting for a new event from the hardware. + */ +static void bcm63xx_ep0_process(struct work_struct *w) +{ + struct bcm63xx_udc *udc = container_of(w, struct bcm63xx_udc, ep0_wq); + spin_lock_irq(&udc->lock); + while (bcm63xx_ep0_one_round(udc) == 0) + ; + spin_unlock_irq(&udc->lock); +} + +/*********************************************************************** + * Standard UDC gadget operations + ***********************************************************************/ + +/** + * bcm63xx_udc_get_frame - Read current SOF frame number from the HW. + * @gadget: USB device. + */ +static int bcm63xx_udc_get_frame(struct usb_gadget *gadget) +{ + struct bcm63xx_udc *udc = gadget_to_udc(gadget); + + return (usbd_readl(udc, USBD_STATUS_REG) & + USBD_STATUS_SOF_MASK) >> USBD_STATUS_SOF_SHIFT; +} + +/** + * bcm63xx_udc_pullup - Enable/disable pullup on D+ line. + * @gadget: USB device. + * @is_on: 0 to disable pullup, 1 to enable. + * + * See notes in bcm63xx_select_pullup(). + */ +static int bcm63xx_udc_pullup(struct usb_gadget *gadget, int is_on) +{ + struct bcm63xx_udc *udc = gadget_to_udc(gadget); + unsigned long flags; + int i, rc = -EINVAL; + + spin_lock_irqsave(&udc->lock, flags); + if (is_on && udc->ep0state == EP0_SHUTDOWN) { + udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->ep0state = EP0_REQUEUE; + bcm63xx_fifo_setup(udc); + bcm63xx_fifo_reset(udc); + bcm63xx_ep_setup(udc); + + bitmap_zero(&udc->wedgemap, BCM63XX_NUM_EP); + for (i = 0; i < BCM63XX_NUM_EP; i++) + bcm63xx_set_stall(udc, &udc->bep[i], false); + + bcm63xx_set_ctrl_irqs(udc, true); + bcm63xx_select_pullup(gadget_to_udc(gadget), true); + rc = 0; + } else if (!is_on && udc->ep0state != EP0_SHUTDOWN) { + bcm63xx_select_pullup(gadget_to_udc(gadget), false); + + udc->ep0_req_shutdown = 1; + spin_unlock_irqrestore(&udc->lock, flags); + + while (1) { + schedule_work(&udc->ep0_wq); + if (udc->ep0state == EP0_SHUTDOWN) + break; + msleep(50); + } + bcm63xx_set_ctrl_irqs(udc, false); + cancel_work_sync(&udc->ep0_wq); + return 0; + } + + spin_unlock_irqrestore(&udc->lock, flags); + return rc; +} + +/** + * bcm63xx_udc_start - Start the controller. + * @gadget: USB device. + * @driver: Driver for USB device. + */ +static int bcm63xx_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct bcm63xx_udc *udc = gadget_to_udc(gadget); + unsigned long flags; + + if (!driver || driver->max_speed < USB_SPEED_HIGH || + !driver->setup) + return -EINVAL; + if (!udc) + return -ENODEV; + if (udc->driver) + return -EBUSY; + + spin_lock_irqsave(&udc->lock, flags); + + set_clocks(udc, true); + bcm63xx_fifo_setup(udc); + bcm63xx_ep_init(udc); + bcm63xx_ep_setup(udc); + bcm63xx_fifo_reset(udc); + bcm63xx_select_phy_mode(udc, true); + + udc->driver = driver; + udc->gadget.dev.of_node = udc->dev->of_node; + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +/** + * bcm63xx_udc_stop - Shut down the controller. + * @gadget: USB device. + * @driver: Driver for USB device. + */ +static int bcm63xx_udc_stop(struct usb_gadget *gadget) +{ + struct bcm63xx_udc *udc = gadget_to_udc(gadget); + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + + udc->driver = NULL; + + /* + * If we switch the PHY too abruptly after dropping D+, the host + * will often complain: + * + * hub 1-0:1.0: port 1 disabled by hub (EMI?), re-enabling... + */ + msleep(100); + + bcm63xx_select_phy_mode(udc, false); + set_clocks(udc, false); + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static const struct usb_gadget_ops bcm63xx_udc_ops = { + .get_frame = bcm63xx_udc_get_frame, + .pullup = bcm63xx_udc_pullup, + .udc_start = bcm63xx_udc_start, + .udc_stop = bcm63xx_udc_stop, +}; + +/*********************************************************************** + * IRQ handling + ***********************************************************************/ + +/** + * bcm63xx_update_cfg_iface - Read current configuration/interface settings. + * @udc: Reference to the device controller. + * + * This controller intercepts SET_CONFIGURATION and SET_INTERFACE messages. + * The driver never sees the raw control packets coming in on the ep0 + * IUDMA channel, but at least we get an interrupt event to tell us that + * new values are waiting in the USBD_STATUS register. + */ +static void bcm63xx_update_cfg_iface(struct bcm63xx_udc *udc) +{ + u32 reg = usbd_readl(udc, USBD_STATUS_REG); + + udc->cfg = (reg & USBD_STATUS_CFG_MASK) >> USBD_STATUS_CFG_SHIFT; + udc->iface = (reg & USBD_STATUS_INTF_MASK) >> USBD_STATUS_INTF_SHIFT; + udc->alt_iface = (reg & USBD_STATUS_ALTINTF_MASK) >> + USBD_STATUS_ALTINTF_SHIFT; + bcm63xx_ep_setup(udc); +} + +/** + * bcm63xx_update_link_speed - Check to see if the link speed has changed. + * @udc: Reference to the device controller. + * + * The link speed update coincides with a SETUP IRQ. Returns 1 if the + * speed has changed, so that the caller can update the endpoint settings. + */ +static int bcm63xx_update_link_speed(struct bcm63xx_udc *udc) +{ + u32 reg = usbd_readl(udc, USBD_STATUS_REG); + enum usb_device_speed oldspeed = udc->gadget.speed; + + switch ((reg & USBD_STATUS_SPD_MASK) >> USBD_STATUS_SPD_SHIFT) { + case BCM63XX_SPD_HIGH: + udc->gadget.speed = USB_SPEED_HIGH; + break; + case BCM63XX_SPD_FULL: + udc->gadget.speed = USB_SPEED_FULL; + break; + default: + /* this should never happen */ + udc->gadget.speed = USB_SPEED_UNKNOWN; + dev_err(udc->dev, + "received SETUP packet with invalid link speed\n"); + return 0; + } + + if (udc->gadget.speed != oldspeed) { + dev_info(udc->dev, "link up, %s-speed mode\n", + udc->gadget.speed == USB_SPEED_HIGH ? "high" : "full"); + return 1; + } else { + return 0; + } +} + +/** + * bcm63xx_update_wedge - Iterate through wedged endpoints. + * @udc: Reference to the device controller. + * @new_status: true to "refresh" wedge status; false to clear it. + * + * On a SETUP interrupt, we need to manually "refresh" the wedge status + * because the controller hardware is designed to automatically clear + * stalls in response to a CLEAR_FEATURE request from the host. + * + * On a RESET interrupt, we do want to restore all wedged endpoints. + */ +static void bcm63xx_update_wedge(struct bcm63xx_udc *udc, bool new_status) +{ + int i; + + for_each_set_bit(i, &udc->wedgemap, BCM63XX_NUM_EP) { + bcm63xx_set_stall(udc, &udc->bep[i], new_status); + if (!new_status) + clear_bit(i, &udc->wedgemap); + } +} + +/** + * bcm63xx_udc_ctrl_isr - ISR for control path events (USBD). + * @irq: IRQ number (unused). + * @dev_id: Reference to the device controller. + * + * This is where we handle link (VBUS) down, USB reset, speed changes, + * SET_CONFIGURATION, and SET_INTERFACE events. + */ +static irqreturn_t bcm63xx_udc_ctrl_isr(int irq, void *dev_id) +{ + struct bcm63xx_udc *udc = dev_id; + u32 stat; + bool disconnected = false, bus_reset = false; + + stat = usbd_readl(udc, USBD_EVENT_IRQ_STATUS_REG) & + usbd_readl(udc, USBD_EVENT_IRQ_MASK_REG); + + usbd_writel(udc, stat, USBD_EVENT_IRQ_STATUS_REG); + + spin_lock(&udc->lock); + if (stat & BIT(USBD_EVENT_IRQ_USB_LINK)) { + /* VBUS toggled */ + + if (!(usbd_readl(udc, USBD_EVENTS_REG) & + USBD_EVENTS_USB_LINK_MASK) && + udc->gadget.speed != USB_SPEED_UNKNOWN) + dev_info(udc->dev, "link down\n"); + + udc->gadget.speed = USB_SPEED_UNKNOWN; + disconnected = true; + } + if (stat & BIT(USBD_EVENT_IRQ_USB_RESET)) { + bcm63xx_fifo_setup(udc); + bcm63xx_fifo_reset(udc); + bcm63xx_ep_setup(udc); + + bcm63xx_update_wedge(udc, false); + + udc->ep0_req_reset = 1; + schedule_work(&udc->ep0_wq); + bus_reset = true; + } + if (stat & BIT(USBD_EVENT_IRQ_SETUP)) { + if (bcm63xx_update_link_speed(udc)) { + bcm63xx_fifo_setup(udc); + bcm63xx_ep_setup(udc); + } + bcm63xx_update_wedge(udc, true); + } + if (stat & BIT(USBD_EVENT_IRQ_SETCFG)) { + bcm63xx_update_cfg_iface(udc); + udc->ep0_req_set_cfg = 1; + schedule_work(&udc->ep0_wq); + } + if (stat & BIT(USBD_EVENT_IRQ_SETINTF)) { + bcm63xx_update_cfg_iface(udc); + udc->ep0_req_set_iface = 1; + schedule_work(&udc->ep0_wq); + } + spin_unlock(&udc->lock); + + if (disconnected && udc->driver) + udc->driver->disconnect(&udc->gadget); + else if (bus_reset && udc->driver) + usb_gadget_udc_reset(&udc->gadget, udc->driver); + + return IRQ_HANDLED; +} + +/** + * bcm63xx_udc_data_isr - ISR for data path events (IUDMA). + * @irq: IRQ number (unused). + * @dev_id: Reference to the IUDMA channel that generated the interrupt. + * + * For the two ep0 channels, we have special handling that triggers the + * ep0 worker thread. For normal bulk/intr channels, either queue up + * the next buffer descriptor for the transaction (incomplete transaction), + * or invoke the completion callback (complete transactions). + */ +static irqreturn_t bcm63xx_udc_data_isr(int irq, void *dev_id) +{ + struct iudma_ch *iudma = dev_id; + struct bcm63xx_udc *udc = iudma->udc; + struct bcm63xx_ep *bep; + struct usb_request *req = NULL; + struct bcm63xx_req *breq = NULL; + int rc; + bool is_done = false; + + spin_lock(&udc->lock); + + usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK, + ENETDMAC_IR_REG, iudma->ch_idx); + bep = iudma->bep; + rc = iudma_read(udc, iudma); + + /* special handling for EP0 RX (0) and TX (1) */ + if (iudma->ch_idx == IUDMA_EP0_RXCHAN || + iudma->ch_idx == IUDMA_EP0_TXCHAN) { + req = udc->ep0_request; + breq = our_req(req); + + /* a single request could require multiple submissions */ + if (rc >= 0) { + req->actual += rc; + + if (req->actual >= req->length || breq->bd_bytes > rc) { + udc->ep0_req_completed = 1; + is_done = true; + schedule_work(&udc->ep0_wq); + + /* "actual" on a ZLP is 1 byte */ + req->actual = min(req->actual, req->length); + } else { + /* queue up the next BD (same request) */ + iudma_write(udc, iudma, breq); + } + } + } else if (!list_empty(&bep->queue)) { + breq = list_first_entry(&bep->queue, struct bcm63xx_req, queue); + req = &breq->req; + + if (rc >= 0) { + req->actual += rc; + + if (req->actual >= req->length || breq->bd_bytes > rc) { + is_done = true; + list_del(&breq->queue); + + req->actual = min(req->actual, req->length); + + if (!list_empty(&bep->queue)) { + struct bcm63xx_req *next; + + next = list_first_entry(&bep->queue, + struct bcm63xx_req, queue); + iudma_write(udc, iudma, next); + } + } else { + iudma_write(udc, iudma, breq); + } + } + } + spin_unlock(&udc->lock); + + if (is_done) { + usb_gadget_unmap_request(&udc->gadget, req, iudma->is_tx); + if (req->complete) + req->complete(&bep->ep, req); + } + + return IRQ_HANDLED; +} + +/*********************************************************************** + * Debug filesystem + ***********************************************************************/ + +/* + * bcm63xx_usbd_dbg_show - Show USBD controller state. + * @s: seq_file to which the information will be written. + * @p: Unused. + * + * This file nominally shows up as /sys/kernel/debug/bcm63xx_udc/usbd + */ +static int bcm63xx_usbd_dbg_show(struct seq_file *s, void *p) +{ + struct bcm63xx_udc *udc = s->private; + + if (!udc->driver) + return -ENODEV; + + seq_printf(s, "ep0 state: %s\n", + bcm63xx_ep0_state_names[udc->ep0state]); + seq_printf(s, " pending requests: %s%s%s%s%s%s%s\n", + udc->ep0_req_reset ? "reset " : "", + udc->ep0_req_set_cfg ? "set_cfg " : "", + udc->ep0_req_set_iface ? "set_iface " : "", + udc->ep0_req_shutdown ? "shutdown " : "", + udc->ep0_request ? "pending " : "", + udc->ep0_req_completed ? "completed " : "", + udc->ep0_reply ? "reply " : ""); + seq_printf(s, "cfg: %d; iface: %d; alt_iface: %d\n", + udc->cfg, udc->iface, udc->alt_iface); + seq_printf(s, "regs:\n"); + seq_printf(s, " control: %08x; straps: %08x; status: %08x\n", + usbd_readl(udc, USBD_CONTROL_REG), + usbd_readl(udc, USBD_STRAPS_REG), + usbd_readl(udc, USBD_STATUS_REG)); + seq_printf(s, " events: %08x; stall: %08x\n", + usbd_readl(udc, USBD_EVENTS_REG), + usbd_readl(udc, USBD_STALL_REG)); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(bcm63xx_usbd_dbg); + +/* + * bcm63xx_iudma_dbg_show - Show IUDMA status and descriptors. + * @s: seq_file to which the information will be written. + * @p: Unused. + * + * This file nominally shows up as /sys/kernel/debug/bcm63xx_udc/iudma + */ +static int bcm63xx_iudma_dbg_show(struct seq_file *s, void *p) +{ + struct bcm63xx_udc *udc = s->private; + int ch_idx, i; + u32 sram2, sram3; + + if (!udc->driver) + return -ENODEV; + + for (ch_idx = 0; ch_idx < BCM63XX_NUM_IUDMA; ch_idx++) { + struct iudma_ch *iudma = &udc->iudma[ch_idx]; + struct list_head *pos; + + seq_printf(s, "IUDMA channel %d -- ", ch_idx); + switch (iudma_defaults[ch_idx].ep_type) { + case BCMEP_CTRL: + seq_printf(s, "control"); + break; + case BCMEP_BULK: + seq_printf(s, "bulk"); + break; + case BCMEP_INTR: + seq_printf(s, "interrupt"); + break; + } + seq_printf(s, ch_idx & 0x01 ? " tx" : " rx"); + seq_printf(s, " [ep%d]:\n", + max_t(int, iudma_defaults[ch_idx].ep_num, 0)); + seq_printf(s, " cfg: %08x; irqstat: %08x; irqmask: %08x; maxburst: %08x\n", + usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx), + usb_dmac_readl(udc, ENETDMAC_IR_REG, ch_idx), + usb_dmac_readl(udc, ENETDMAC_IRMASK_REG, ch_idx), + usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG, ch_idx)); + + sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG, ch_idx); + sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG, ch_idx); + seq_printf(s, " base: %08x; index: %04x_%04x; desc: %04x_%04x %08x\n", + usb_dmas_readl(udc, ENETDMAS_RSTART_REG, ch_idx), + sram2 >> 16, sram2 & 0xffff, + sram3 >> 16, sram3 & 0xffff, + usb_dmas_readl(udc, ENETDMAS_SRAM4_REG, ch_idx)); + seq_printf(s, " desc: %d/%d used", iudma->n_bds_used, + iudma->n_bds); + + if (iudma->bep) { + i = 0; + list_for_each(pos, &iudma->bep->queue) + i++; + seq_printf(s, "; %d queued\n", i); + } else { + seq_printf(s, "\n"); + } + + for (i = 0; i < iudma->n_bds; i++) { + struct bcm_enet_desc *d = &iudma->bd_ring[i]; + + seq_printf(s, " %03x (%02x): len_stat: %04x_%04x; pa %08x", + i * sizeof(*d), i, + d->len_stat >> 16, d->len_stat & 0xffff, + d->address); + if (d == iudma->read_bd) + seq_printf(s, " <<RD"); + if (d == iudma->write_bd) + seq_printf(s, " <<WR"); + seq_printf(s, "\n"); + } + + seq_printf(s, "\n"); + } + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(bcm63xx_iudma_dbg); + +/** + * bcm63xx_udc_init_debugfs - Create debugfs entries. + * @udc: Reference to the device controller. + */ +static void bcm63xx_udc_init_debugfs(struct bcm63xx_udc *udc) +{ + struct dentry *root; + + if (!IS_ENABLED(CONFIG_USB_GADGET_DEBUG_FS)) + return; + + root = debugfs_create_dir(udc->gadget.name, usb_debug_root); + debugfs_create_file("usbd", 0400, root, udc, &bcm63xx_usbd_dbg_fops); + debugfs_create_file("iudma", 0400, root, udc, &bcm63xx_iudma_dbg_fops); +} + +/** + * bcm63xx_udc_cleanup_debugfs - Remove debugfs entries. + * @udc: Reference to the device controller. + * + * debugfs_remove() is safe to call with a NULL argument. + */ +static void bcm63xx_udc_cleanup_debugfs(struct bcm63xx_udc *udc) +{ + debugfs_lookup_and_remove(udc->gadget.name, usb_debug_root); +} + +/*********************************************************************** + * Driver init/exit + ***********************************************************************/ + +/** + * bcm63xx_udc_probe - Initialize a new instance of the UDC. + * @pdev: Platform device struct from the bcm63xx BSP code. + * + * Note that platform data is required, because pd.port_no varies from chip + * to chip and is used to switch the correct USB port to device mode. + */ +static int bcm63xx_udc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct bcm63xx_usbd_platform_data *pd = dev_get_platdata(dev); + struct bcm63xx_udc *udc; + int rc = -ENOMEM, i, irq; + + udc = devm_kzalloc(dev, sizeof(*udc), GFP_KERNEL); + if (!udc) + return -ENOMEM; + + platform_set_drvdata(pdev, udc); + udc->dev = dev; + udc->pd = pd; + + if (!pd) { + dev_err(dev, "missing platform data\n"); + return -EINVAL; + } + + udc->usbd_regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(udc->usbd_regs)) + return PTR_ERR(udc->usbd_regs); + + udc->iudma_regs = devm_platform_ioremap_resource(pdev, 1); + if (IS_ERR(udc->iudma_regs)) + return PTR_ERR(udc->iudma_regs); + + spin_lock_init(&udc->lock); + INIT_WORK(&udc->ep0_wq, bcm63xx_ep0_process); + + udc->gadget.ops = &bcm63xx_udc_ops; + udc->gadget.name = dev_name(dev); + + if (!pd->use_fullspeed && !use_fullspeed) + udc->gadget.max_speed = USB_SPEED_HIGH; + else + udc->gadget.max_speed = USB_SPEED_FULL; + + /* request clocks, allocate buffers, and clear any pending IRQs */ + rc = bcm63xx_init_udc_hw(udc); + if (rc) + return rc; + + rc = -ENXIO; + + /* IRQ resource #0: control interrupt (VBUS, speed, etc.) */ + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + rc = irq; + goto out_uninit; + } + if (devm_request_irq(dev, irq, &bcm63xx_udc_ctrl_isr, 0, + dev_name(dev), udc) < 0) + goto report_request_failure; + + /* IRQ resources #1-6: data interrupts for IUDMA channels 0-5 */ + for (i = 0; i < BCM63XX_NUM_IUDMA; i++) { + irq = platform_get_irq(pdev, i + 1); + if (irq < 0) { + rc = irq; + goto out_uninit; + } + if (devm_request_irq(dev, irq, &bcm63xx_udc_data_isr, 0, + dev_name(dev), &udc->iudma[i]) < 0) + goto report_request_failure; + } + + bcm63xx_udc_init_debugfs(udc); + rc = usb_add_gadget_udc(dev, &udc->gadget); + if (!rc) + return 0; + + bcm63xx_udc_cleanup_debugfs(udc); +out_uninit: + bcm63xx_uninit_udc_hw(udc); + return rc; + +report_request_failure: + dev_err(dev, "error requesting IRQ #%d\n", irq); + goto out_uninit; +} + +/** + * bcm63xx_udc_remove - Remove the device from the system. + * @pdev: Platform device struct from the bcm63xx BSP code. + */ +static int bcm63xx_udc_remove(struct platform_device *pdev) +{ + struct bcm63xx_udc *udc = platform_get_drvdata(pdev); + + bcm63xx_udc_cleanup_debugfs(udc); + usb_del_gadget_udc(&udc->gadget); + BUG_ON(udc->driver); + + bcm63xx_uninit_udc_hw(udc); + + return 0; +} + +static struct platform_driver bcm63xx_udc_driver = { + .probe = bcm63xx_udc_probe, + .remove = bcm63xx_udc_remove, + .driver = { + .name = DRV_MODULE_NAME, + }, +}; +module_platform_driver(bcm63xx_udc_driver); + +MODULE_DESCRIPTION("BCM63xx USB Peripheral Controller"); +MODULE_AUTHOR("Kevin Cernekee <cernekee@gmail.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_MODULE_NAME); diff --git a/drivers/usb/gadget/udc/bdc/Kconfig b/drivers/usb/gadget/udc/bdc/Kconfig new file mode 100644 index 000000000..8bedb7f64 --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/Kconfig @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-2.0 + +config USB_BDC_UDC + tristate "Broadcom USB3.0 device controller IP driver(BDC)" + depends on USB_GADGET && HAS_DMA + default ARCH_BRCMSTB + + help + BDC is Broadcom's USB3.0 device controller IP. If your SOC has a BDC IP + then select this driver. + + Say "y" here to link the driver statically, or "m" to build a dynamically + linked module called "bdc". diff --git a/drivers/usb/gadget/udc/bdc/Makefile b/drivers/usb/gadget/udc/bdc/Makefile new file mode 100644 index 000000000..1b21c9518 --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/Makefile @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_USB_BDC_UDC) += bdc.o +bdc-y := bdc_core.o bdc_cmd.o bdc_ep.o bdc_udc.o + +ifneq ($(CONFIG_USB_GADGET_VERBOSE),) + bdc-y += bdc_dbg.o +endif diff --git a/drivers/usb/gadget/udc/bdc/bdc.h b/drivers/usb/gadget/udc/bdc/bdc.h new file mode 100644 index 000000000..8d00b1239 --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc.h @@ -0,0 +1,489 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * bdc.h - header for the BRCM BDC USB3.0 device controller + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + */ + +#ifndef __LINUX_BDC_H__ +#define __LINUX_BDC_H__ + +#include <linux/kernel.h> +#include <linux/usb.h> +#include <linux/device.h> +#include <linux/spinlock.h> +#include <linux/list.h> +#include <linux/dma-mapping.h> +#include <linux/mm.h> +#include <linux/debugfs.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <asm/unaligned.h> + +#define BRCM_BDC_NAME "bdc" +#define BRCM_BDC_DESC "Broadcom USB Device Controller driver" + +#define DMA_ADDR_INVALID (~(dma_addr_t)0) + +/* BDC command operation timeout in usec*/ +#define BDC_CMD_TIMEOUT 1000 +/* BDC controller operation timeout in usec*/ +#define BDC_COP_TIMEOUT 500 + +/* + * Maximum size of ep0 response buffer for ch9 requests, + * the set_sel request uses 6 so far, the max. + */ +#define EP0_RESPONSE_BUFF 6 +/* Start with SS as default */ +#define EP0_MAX_PKT_SIZE 512 + +/* 64 entries in a SRR */ +#define NUM_SR_ENTRIES 64 + +/* Num of bds per table */ +#define NUM_BDS_PER_TABLE 64 + +/* Num of tables in bd list for control,bulk and Int ep */ +#define NUM_TABLES 2 + +/* Num of tables in bd list for Isoch ep */ +#define NUM_TABLES_ISOCH 6 + +/* U1 Timeout default: 248usec */ +#define U1_TIMEOUT 0xf8 + +/* Interrupt coalescence in usec */ +#define INT_CLS 500 + +/* Register offsets */ +/* Configuration and Capability registers */ +#define BDC_BDCCFG0 0x00 +#define BDC_BDCCFG1 0x04 +#define BDC_BDCCAP0 0x08 +#define BDC_BDCCAP1 0x0c +#define BDC_CMDPAR0 0x10 +#define BDC_CMDPAR1 0x14 +#define BDC_CMDPAR2 0x18 +#define BDC_CMDSC 0x1c +#define BDC_USPC 0x20 +#define BDC_USPPMS 0x28 +#define BDC_USPPM2 0x2c +#define BDC_SPBBAL 0x38 +#define BDC_SPBBAH 0x3c +#define BDC_BDCSC 0x40 +#define BDC_XSFNTF 0x4c + +#define BDC_DVCSA 0x50 +#define BDC_DVCSB 0x54 +#define BDC_EPSTS0 0x60 +#define BDC_EPSTS1 0x64 +#define BDC_EPSTS2 0x68 +#define BDC_EPSTS3 0x6c +#define BDC_EPSTS4 0x70 +#define BDC_EPSTS5 0x74 +#define BDC_EPSTS6 0x78 +#define BDC_EPSTS7 0x7c +#define BDC_SRRBAL(n) (0x200 + ((n) * 0x10)) +#define BDC_SRRBAH(n) (0x204 + ((n) * 0x10)) +#define BDC_SRRINT(n) (0x208 + ((n) * 0x10)) +#define BDC_INTCTLS(n) (0x20c + ((n) * 0x10)) + +/* Extended capability regs */ +#define BDC_FSCNOC 0xcd4 +#define BDC_FSCNIC 0xce4 +#define NUM_NCS(p) ((p) >> 28) + +/* Register bit fields and Masks */ +/* BDC Configuration 0 */ +#define BDC_PGS(p) (((p) & (0x7 << 8)) >> 8) +#define BDC_SPB(p) ((p) & 0x7) + +/* BDC Capability1 */ +#define BDC_P64 BIT(0) + +/* BDC Command register */ +#define BDC_CMD_FH 0xe +#define BDC_CMD_DNC 0x6 +#define BDC_CMD_EPO 0x4 +#define BDC_CMD_BLA 0x3 +#define BDC_CMD_EPC 0x2 +#define BDC_CMD_DVC 0x1 +#define BDC_CMD_CWS BIT(5) +#define BDC_CMD_CST(p) (((p) & (0xf << 6))>>6) +#define BDC_CMD_EPN(p) (((p) & 0x1f) << 10) +#define BDC_SUB_CMD_ADD (0x1 << 17) +#define BDC_SUB_CMD_FWK (0x4 << 17) +/* Reset sequence number */ +#define BDC_CMD_EPO_RST_SN (0x1 << 16) +#define BDC_CMD_EP0_XSD (0x1 << 16) +#define BDC_SUB_CMD_ADD_EP (0x1 << 17) +#define BDC_SUB_CMD_DRP_EP (0x2 << 17) +#define BDC_SUB_CMD_EP_STP (0x2 << 17) +#define BDC_SUB_CMD_EP_STL (0x4 << 17) +#define BDC_SUB_CMD_EP_RST (0x1 << 17) +#define BDC_CMD_SRD BIT(27) + +/* CMD completion status */ +#define BDC_CMDS_SUCC 0x1 +#define BDC_CMDS_PARA 0x3 +#define BDC_CMDS_STAT 0x4 +#define BDC_CMDS_FAIL 0x5 +#define BDC_CMDS_INTL 0x6 +#define BDC_CMDS_BUSY 0xf + +/* CMDSC Param 2 shifts */ +#define EPT_SHIFT 22 +#define MP_SHIFT 10 +#define MB_SHIFT 6 +#define EPM_SHIFT 4 + +/* BDC USPSC */ +#define BDC_VBC BIT(31) +#define BDC_PRC BIT(30) +#define BDC_PCE BIT(29) +#define BDC_CFC BIT(28) +#define BDC_PCC BIT(27) +#define BDC_PSC BIT(26) +#define BDC_VBS BIT(25) +#define BDC_PRS BIT(24) +#define BDC_PCS BIT(23) +#define BDC_PSP(p) (((p) & (0x7 << 20))>>20) +#define BDC_SCN BIT(8) +#define BDC_SDC BIT(7) +#define BDC_SWS BIT(4) + +#define BDC_USPSC_RW (BDC_SCN|BDC_SDC|BDC_SWS|0xf) +#define BDC_PSP(p) (((p) & (0x7 << 20))>>20) + +#define BDC_SPEED_FS 0x1 +#define BDC_SPEED_LS 0x2 +#define BDC_SPEED_HS 0x3 +#define BDC_SPEED_SS 0x4 + +#define BDC_PST(p) ((p) & 0xf) +#define BDC_PST_MASK 0xf + +/* USPPMS */ +#define BDC_U2E BIT(31) +#define BDC_U1E BIT(30) +#define BDC_U2A BIT(29) +#define BDC_PORT_W1S BIT(17) +#define BDC_U1T(p) ((p) & 0xff) +#define BDC_U2T(p) (((p) & 0xff) << 8) +#define BDC_U1T_MASK 0xff + +/* USBPM2 */ +/* Hardware LPM Enable */ +#define BDC_HLE BIT(16) + +/* BDC Status and Control */ +#define BDC_COP_RST (1 << 29) +#define BDC_COP_RUN (2 << 29) +#define BDC_COP_STP (4 << 29) + +#define BDC_COP_MASK (BDC_COP_RST|BDC_COP_RUN|BDC_COP_STP) + +#define BDC_COS BIT(28) +#define BDC_CSTS(p) (((p) & (0x7 << 20)) >> 20) +#define BDC_MASK_MCW BIT(7) +#define BDC_GIE BIT(1) +#define BDC_GIP BIT(0) + +#define BDC_HLT 1 +#define BDC_NOR 2 +#define BDC_OIP 7 + +/* Buffer descriptor and Status report bit fields and masks */ +#define BD_TYPE_BITMASK (0xf) +#define BD_CHAIN 0xf + +#define BD_TFS_SHIFT 4 +#define BD_SOT BIT(26) +#define BD_EOT BIT(27) +#define BD_ISP BIT(29) +#define BD_IOC BIT(30) +#define BD_SBF BIT(31) + +#define BD_INTR_TARGET(p) (((p) & 0x1f) << 27) + +#define BDC_SRR_RWS BIT(4) +#define BDC_SRR_RST BIT(3) +#define BDC_SRR_ISR BIT(2) +#define BDC_SRR_IE BIT(1) +#define BDC_SRR_IP BIT(0) +#define BDC_SRR_EPI(p) (((p) & (0xff << 24)) >> 24) +#define BDC_SRR_DPI(p) (((p) & (0xff << 16)) >> 16) +#define BDC_SRR_DPI_MASK 0x00ff0000 + +#define MARK_CHAIN_BD (BD_CHAIN|BD_EOT|BD_SOT) + +/* Control transfer BD specific fields */ +#define BD_DIR_IN BIT(25) + +#define BDC_PTC_MASK 0xf0000000 + +/* status report defines */ +#define SR_XSF 0 +#define SR_USPC 4 +#define SR_BD_LEN(p) ((p) & 0xffffff) + +#define XSF_SUCC 0x1 +#define XSF_SHORT 0x3 +#define XSF_BABB 0x4 +#define XSF_SETUP_RECV 0x6 +#define XSF_DATA_START 0x7 +#define XSF_STATUS_START 0x8 + +#define XSF_STS(p) (((p) >> 28) & 0xf) + +/* Transfer BD fields */ +#define BD_LEN(p) ((p) & 0x1ffff) +#define BD_LTF BIT(25) +#define BD_TYPE_DS 0x1 +#define BD_TYPE_SS 0x2 + +#define BDC_EP_ENABLED BIT(0) +#define BDC_EP_STALL BIT(1) +#define BDC_EP_STOP BIT(2) + +/* One BD can transfer max 65536 bytes */ +#define BD_MAX_BUFF_SIZE (1 << 16) +/* Maximum bytes in one XFR, Refer to BDC spec */ +#define MAX_XFR_LEN 16777215 + +/* defines for Force Header command */ +#define DEV_NOTF_TYPE 6 +#define FWK_SUBTYPE 1 +#define TRA_PACKET 4 + +#define to_bdc_ep(e) container_of(e, struct bdc_ep, usb_ep) +#define to_bdc_req(r) container_of(r, struct bdc_req, usb_req) +#define gadget_to_bdc(g) container_of(g, struct bdc, gadget) + +/* FUNCTION WAKE DEV NOTIFICATION interval, USB3 spec table 8.13 */ +#define BDC_TNOTIFY 2500 /*in ms*/ +/* Devstatus bitfields */ +#define REMOTE_WAKEUP_ISSUED BIT(16) +#define DEVICE_SUSPENDED BIT(17) +#define FUNC_WAKE_ISSUED BIT(18) +#define REMOTE_WAKE_ENABLE (1 << USB_DEVICE_REMOTE_WAKEUP) + +/* On disconnect, preserve these bits and clear rest */ +#define DEVSTATUS_CLEAR (1 << USB_DEVICE_SELF_POWERED) +/* Hardware and software Data structures */ + +/* Endpoint bd: buffer descriptor */ +struct bdc_bd { + __le32 offset[4]; +}; + +/* Status report in Status report ring(srr) */ +struct bdc_sr { + __le32 offset[4]; +}; + +/* bd_table: contiguous bd's in a table */ +struct bd_table { + struct bdc_bd *start_bd; + /* dma address of start bd of table*/ + dma_addr_t dma; +}; + +/* + * Each endpoint has a bdl(buffer descriptor list), bdl consists of 1 or more bd + * table's chained to each other through a chain bd, every table has equal + * number of bds. the software uses bdi(bd index) to refer to particular bd in + * the list. + */ +struct bd_list { + /* Array of bd table pointers*/ + struct bd_table **bd_table_array; + /* How many tables chained to each other */ + int num_tabs; + /* Max_bdi = num_tabs * num_bds_table - 1 */ + int max_bdi; + /* current enq bdi from sw point of view */ + int eqp_bdi; + /* current deq bdi from sw point of view */ + int hwd_bdi; + /* numbers of bds per table */ + int num_bds_table; +}; + +struct bdc_req; + +/* Representation of a transfer, one transfer can have multiple bd's */ +struct bd_transfer { + struct bdc_req *req; + /* start bd index */ + int start_bdi; + /* this will be the next hw dqp when this transfer completes */ + int next_hwd_bdi; + /* number of bds in this transfer */ + int num_bds; +}; + +/* + * Representation of a gadget request, every gadget request is contained + * by 1 bd_transfer. + */ +struct bdc_req { + struct usb_request usb_req; + struct list_head queue; + struct bdc_ep *ep; + /* only one Transfer per request */ + struct bd_transfer bd_xfr; + int epnum; +}; + +/* scratchpad buffer needed by bdc hardware */ +struct bdc_scratchpad { + dma_addr_t sp_dma; + void *buff; + u32 size; +}; + +/* endpoint representation */ +struct bdc_ep { + struct usb_ep usb_ep; + struct list_head queue; + struct bdc *bdc; + u8 ep_type; + u8 dir; + u8 ep_num; + const struct usb_ss_ep_comp_descriptor *comp_desc; + const struct usb_endpoint_descriptor *desc; + unsigned int flags; + char name[20]; + /* endpoint bd list*/ + struct bd_list bd_list; + /* + * HW generates extra event for multi bd tranfers, this flag helps in + * ignoring the extra event + */ + bool ignore_next_sr; +}; + +/* bdc cmmand parameter structure */ +struct bdc_cmd_params { + u32 param2; + u32 param1; + u32 param0; +}; + +/* status report ring(srr), currently one srr is supported for entire system */ +struct srr { + struct bdc_sr *sr_bds; + u16 eqp_index; + u16 dqp_index; + dma_addr_t dma_addr; +}; + +/* EP0 states */ +enum bdc_ep0_state { + WAIT_FOR_SETUP = 0, + WAIT_FOR_DATA_START, + WAIT_FOR_DATA_XMIT, + WAIT_FOR_STATUS_START, + WAIT_FOR_STATUS_XMIT, + STATUS_PENDING +}; + +/* Link states */ +enum bdc_link_state { + BDC_LINK_STATE_U0 = 0x00, + BDC_LINK_STATE_U3 = 0x03, + BDC_LINK_STATE_RX_DET = 0x05, + BDC_LINK_STATE_RESUME = 0x0f +}; + +/* representation of bdc */ +struct bdc { + struct usb_gadget gadget; + struct usb_gadget_driver *gadget_driver; + struct device *dev; + /* device lock */ + spinlock_t lock; + + /* generic phy */ + struct phy **phys; + int num_phys; + /* num of endpoints for a particular instantiation of IP */ + unsigned int num_eps; + /* + * Array of ep's, it uses the same index covention as bdc hw i.e. + * 1 for ep0, 2 for 1out,3 for 1in .... + */ + struct bdc_ep **bdc_ep_array; + void __iomem *regs; + struct bdc_scratchpad scratchpad; + u32 sp_buff_size; + /* current driver supports 1 status ring */ + struct srr srr; + /* Last received setup packet */ + struct usb_ctrlrequest setup_pkt; + struct bdc_req ep0_req; + struct bdc_req status_req; + enum bdc_ep0_state ep0_state; + bool delayed_status; + bool zlp_needed; + bool reinit; + bool pullup; + /* Bits 0-15 are standard and 16-31 for proprietary information */ + u32 devstatus; + int irq; + void *mem; + u32 dev_addr; + /* DMA pools */ + struct dma_pool *bd_table_pool; + u8 test_mode; + /* array of callbacks for various status report handlers */ + void (*sr_handler[2])(struct bdc *, struct bdc_sr *); + /* ep0 callback handlers */ + void (*sr_xsf_ep0[3])(struct bdc *, struct bdc_sr *); + /* ep0 response buffer for ch9 requests like GET_STATUS and SET_SEL */ + unsigned char ep0_response_buff[EP0_RESPONSE_BUFF]; + /* + * Timer to check if host resumed transfer after bdc sent Func wake + * notification packet after a remote wakeup. if not, then resend the + * Func Wake packet every 2.5 secs. Refer to USB3 spec section 8.5.6.4 + */ + struct delayed_work func_wake_notify; + struct clk *clk; +}; + +static inline u32 bdc_readl(void __iomem *base, u32 offset) +{ + return readl(base + offset); +} + +static inline void bdc_writel(void __iomem *base, u32 offset, u32 value) +{ + writel(value, base + offset); +} + +/* Buffer descriptor list operations */ +void bdc_notify_xfr(struct bdc *bdc, u32 epnum); +void bdc_softconn(struct bdc *bdc); +void bdc_softdisconn(struct bdc *bdc); +int bdc_run(struct bdc *bdc); +int bdc_stop(struct bdc *bdc); +int bdc_reset(struct bdc *bdc); +int bdc_udc_init(struct bdc *bdc); +void bdc_udc_exit(struct bdc *bdc); +int bdc_reinit(struct bdc *bdc); + +/* Status report handlers */ +/* Upstream port status change sr */ +void bdc_sr_uspc(struct bdc *bdc, struct bdc_sr *sreport); +/* transfer sr */ +void bdc_sr_xsf(struct bdc *bdc, struct bdc_sr *sreport); +/* EP0 XSF handlers */ +void bdc_xsf_ep0_setup_recv(struct bdc *bdc, struct bdc_sr *sreport); +void bdc_xsf_ep0_data_start(struct bdc *bdc, struct bdc_sr *sreport); +void bdc_xsf_ep0_status_start(struct bdc *bdc, struct bdc_sr *sreport); + +#endif /* __LINUX_BDC_H__ */ diff --git a/drivers/usb/gadget/udc/bdc/bdc_cmd.c b/drivers/usb/gadget/udc/bdc/bdc_cmd.c new file mode 100644 index 000000000..1848ced07 --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc_cmd.c @@ -0,0 +1,367 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * bdc_cmd.c - BRCM BDC USB3.0 device controller + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + */ +#include <linux/scatterlist.h> +#include <linux/slab.h> + +#include "bdc.h" +#include "bdc_cmd.h" +#include "bdc_dbg.h" + +/* Issues a cmd to cmd processor and waits for cmd completion */ +static int bdc_issue_cmd(struct bdc *bdc, u32 cmd_sc, u32 param0, + u32 param1, u32 param2) +{ + u32 timeout = BDC_CMD_TIMEOUT; + u32 cmd_status; + u32 temp; + + bdc_writel(bdc->regs, BDC_CMDPAR0, param0); + bdc_writel(bdc->regs, BDC_CMDPAR1, param1); + bdc_writel(bdc->regs, BDC_CMDPAR2, param2); + + /* Issue the cmd */ + /* Make sure the cmd params are written before asking HW to exec cmd */ + wmb(); + bdc_writel(bdc->regs, BDC_CMDSC, cmd_sc | BDC_CMD_CWS | BDC_CMD_SRD); + do { + temp = bdc_readl(bdc->regs, BDC_CMDSC); + dev_dbg_ratelimited(bdc->dev, "cmdsc=%x", temp); + cmd_status = BDC_CMD_CST(temp); + if (cmd_status != BDC_CMDS_BUSY) { + dev_dbg(bdc->dev, + "command completed cmd_sts:%x\n", cmd_status); + return cmd_status; + } + udelay(1); + } while (timeout--); + + dev_err(bdc->dev, + "command operation timedout cmd_status=%d\n", cmd_status); + + return cmd_status; +} + +/* Submits cmd and analyze the return value of bdc_issue_cmd */ +static int bdc_submit_cmd(struct bdc *bdc, u32 cmd_sc, + u32 param0, u32 param1, u32 param2) +{ + u32 temp, cmd_status; + int ret; + + temp = bdc_readl(bdc->regs, BDC_CMDSC); + dev_dbg(bdc->dev, + "%s:CMDSC:%08x cmdsc:%08x param0=%08x param1=%08x param2=%08x\n", + __func__, temp, cmd_sc, param0, param1, param2); + + cmd_status = BDC_CMD_CST(temp); + if (cmd_status == BDC_CMDS_BUSY) { + dev_err(bdc->dev, "command processor busy: %x\n", cmd_status); + return -EBUSY; + } + ret = bdc_issue_cmd(bdc, cmd_sc, param0, param1, param2); + switch (ret) { + case BDC_CMDS_SUCC: + dev_dbg(bdc->dev, "command completed successfully\n"); + ret = 0; + break; + + case BDC_CMDS_PARA: + dev_err(bdc->dev, "command parameter error\n"); + ret = -EINVAL; + break; + + case BDC_CMDS_STAT: + dev_err(bdc->dev, "Invalid device/ep state\n"); + ret = -EINVAL; + break; + + case BDC_CMDS_FAIL: + dev_err(bdc->dev, "Command failed?\n"); + ret = -EAGAIN; + break; + + case BDC_CMDS_INTL: + dev_err(bdc->dev, "BDC Internal error\n"); + ret = -ECONNRESET; + break; + + case BDC_CMDS_BUSY: + dev_err(bdc->dev, + "command timedout waited for %dusec\n", + BDC_CMD_TIMEOUT); + ret = -ECONNRESET; + break; + default: + dev_dbg(bdc->dev, "Unknown command completion code:%x\n", ret); + } + + return ret; +} + +/* Deconfigure the endpoint from HW */ +int bdc_dconfig_ep(struct bdc *bdc, struct bdc_ep *ep) +{ + u32 cmd_sc; + + cmd_sc = BDC_SUB_CMD_DRP_EP|BDC_CMD_EPN(ep->ep_num)|BDC_CMD_EPC; + dev_dbg(bdc->dev, "%s ep->ep_num =%d cmd_sc=%x\n", __func__, + ep->ep_num, cmd_sc); + + return bdc_submit_cmd(bdc, cmd_sc, 0, 0, 0); +} + +/* Reinitalize the bdlist after config ep command */ +static void ep_bd_list_reinit(struct bdc_ep *ep) +{ + struct bdc *bdc = ep->bdc; + struct bdc_bd *bd; + + ep->bd_list.eqp_bdi = 0; + ep->bd_list.hwd_bdi = 0; + bd = ep->bd_list.bd_table_array[0]->start_bd; + dev_dbg(bdc->dev, "%s ep:%p bd:%p\n", __func__, ep, bd); + memset(bd, 0, sizeof(struct bdc_bd)); + bd->offset[3] |= cpu_to_le32(BD_SBF); +} + +/* Configure an endpoint */ +int bdc_config_ep(struct bdc *bdc, struct bdc_ep *ep) +{ + const struct usb_ss_ep_comp_descriptor *comp_desc; + const struct usb_endpoint_descriptor *desc; + u32 param0, param1, param2, cmd_sc; + u32 mps, mbs, mul, si; + int ret; + + desc = ep->desc; + comp_desc = ep->comp_desc; + cmd_sc = mul = mbs = param2 = 0; + param0 = lower_32_bits(ep->bd_list.bd_table_array[0]->dma); + param1 = upper_32_bits(ep->bd_list.bd_table_array[0]->dma); + cpu_to_le32s(¶m0); + cpu_to_le32s(¶m1); + + dev_dbg(bdc->dev, "%s: param0=%08x param1=%08x", + __func__, param0, param1); + si = desc->bInterval; + si = clamp_val(si, 1, 16) - 1; + + mps = usb_endpoint_maxp(desc); + param2 |= mps << MP_SHIFT; + param2 |= usb_endpoint_type(desc) << EPT_SHIFT; + + switch (bdc->gadget.speed) { + case USB_SPEED_SUPER: + if (usb_endpoint_xfer_int(desc) || + usb_endpoint_xfer_isoc(desc)) { + param2 |= si; + if (usb_endpoint_xfer_isoc(desc) && comp_desc) + mul = comp_desc->bmAttributes; + + } + param2 |= mul << EPM_SHIFT; + if (comp_desc) + mbs = comp_desc->bMaxBurst; + param2 |= mbs << MB_SHIFT; + break; + + case USB_SPEED_HIGH: + if (usb_endpoint_xfer_isoc(desc) || + usb_endpoint_xfer_int(desc)) { + param2 |= si; + + mbs = usb_endpoint_maxp_mult(desc); + param2 |= mbs << MB_SHIFT; + } + break; + + case USB_SPEED_FULL: + case USB_SPEED_LOW: + /* the hardware accepts SI in 125usec range */ + if (usb_endpoint_xfer_isoc(desc)) + si += 3; + + /* + * FS Int endpoints can have si of 1-255ms but the controller + * accepts 2^bInterval*125usec, so convert ms to nearest power + * of 2 + */ + if (usb_endpoint_xfer_int(desc)) + si = fls(desc->bInterval * 8) - 1; + + param2 |= si; + break; + default: + dev_err(bdc->dev, "UNKNOWN speed ERR\n"); + return -EINVAL; + } + + cmd_sc |= BDC_CMD_EPC|BDC_CMD_EPN(ep->ep_num)|BDC_SUB_CMD_ADD_EP; + + dev_dbg(bdc->dev, "cmd_sc=%x param2=%08x\n", cmd_sc, param2); + ret = bdc_submit_cmd(bdc, cmd_sc, param0, param1, param2); + if (ret) { + dev_err(bdc->dev, "command failed :%x\n", ret); + return ret; + } + ep_bd_list_reinit(ep); + + return ret; +} + +/* + * Change the HW deq pointer, if this command is successful, HW will start + * fetching the next bd from address dma_addr. + */ +int bdc_ep_bla(struct bdc *bdc, struct bdc_ep *ep, dma_addr_t dma_addr) +{ + u32 param0, param1; + u32 cmd_sc = 0; + + dev_dbg(bdc->dev, "%s: add=%08llx\n", __func__, + (unsigned long long)(dma_addr)); + param0 = lower_32_bits(dma_addr); + param1 = upper_32_bits(dma_addr); + cpu_to_le32s(¶m0); + cpu_to_le32s(¶m1); + + cmd_sc |= BDC_CMD_EPN(ep->ep_num)|BDC_CMD_BLA; + dev_dbg(bdc->dev, "cmd_sc=%x\n", cmd_sc); + + return bdc_submit_cmd(bdc, cmd_sc, param0, param1, 0); +} + +/* Set the address sent bu Host in SET_ADD request */ +int bdc_address_device(struct bdc *bdc, u32 add) +{ + u32 cmd_sc = 0; + u32 param2; + + dev_dbg(bdc->dev, "%s: add=%d\n", __func__, add); + cmd_sc |= BDC_SUB_CMD_ADD|BDC_CMD_DVC; + param2 = add & 0x7f; + + return bdc_submit_cmd(bdc, cmd_sc, 0, 0, param2); +} + +/* Send a Function Wake notification packet using FH command */ +int bdc_function_wake_fh(struct bdc *bdc, u8 intf) +{ + u32 param0, param1; + u32 cmd_sc = 0; + + param0 = param1 = 0; + dev_dbg(bdc->dev, "%s intf=%d\n", __func__, intf); + cmd_sc |= BDC_CMD_FH; + param0 |= TRA_PACKET; + param0 |= (bdc->dev_addr << 25); + param1 |= DEV_NOTF_TYPE; + param1 |= (FWK_SUBTYPE<<4); + dev_dbg(bdc->dev, "param0=%08x param1=%08x\n", param0, param1); + + return bdc_submit_cmd(bdc, cmd_sc, param0, param1, 0); +} + +/* Send a Function Wake notification packet using DNC command */ +int bdc_function_wake(struct bdc *bdc, u8 intf) +{ + u32 cmd_sc = 0; + u32 param2 = 0; + + dev_dbg(bdc->dev, "%s intf=%d", __func__, intf); + param2 |= intf; + cmd_sc |= BDC_SUB_CMD_FWK|BDC_CMD_DNC; + + return bdc_submit_cmd(bdc, cmd_sc, 0, 0, param2); +} + +/* Stall the endpoint */ +int bdc_ep_set_stall(struct bdc *bdc, int epnum) +{ + u32 cmd_sc = 0; + + dev_dbg(bdc->dev, "%s epnum=%d\n", __func__, epnum); + /* issue a stall endpoint command */ + cmd_sc |= BDC_SUB_CMD_EP_STL | BDC_CMD_EPN(epnum) | BDC_CMD_EPO; + + return bdc_submit_cmd(bdc, cmd_sc, 0, 0, 0); +} + +/* resets the endpoint, called when host sends CLEAR_FEATURE(HALT) */ +int bdc_ep_clear_stall(struct bdc *bdc, int epnum) +{ + struct bdc_ep *ep; + u32 cmd_sc = 0; + int ret; + + dev_dbg(bdc->dev, "%s: epnum=%d\n", __func__, epnum); + ep = bdc->bdc_ep_array[epnum]; + /* + * If we are not in stalled then stall Endpoint and issue clear stall, + * his will reset the seq number for non EP0. + */ + if (epnum != 1) { + /* if the endpoint it not stalled */ + if (!(ep->flags & BDC_EP_STALL)) { + ret = bdc_ep_set_stall(bdc, epnum); + if (ret) + return ret; + } + } + /* Preserve the seq number for ep0 only */ + if (epnum != 1) + cmd_sc |= BDC_CMD_EPO_RST_SN; + + /* issue a reset endpoint command */ + cmd_sc |= BDC_SUB_CMD_EP_RST | BDC_CMD_EPN(epnum) | BDC_CMD_EPO; + + ret = bdc_submit_cmd(bdc, cmd_sc, 0, 0, 0); + if (ret) { + dev_err(bdc->dev, "command failed:%x\n", ret); + return ret; + } + bdc_notify_xfr(bdc, epnum); + + return ret; +} + +/* Stop the endpoint, called when software wants to dequeue some request */ +int bdc_stop_ep(struct bdc *bdc, int epnum) +{ + struct bdc_ep *ep; + u32 cmd_sc = 0; + int ret; + + ep = bdc->bdc_ep_array[epnum]; + dev_dbg(bdc->dev, "%s: ep:%s ep->flags:%08x\n", __func__, + ep->name, ep->flags); + /* Endpoint has to be in running state to execute stop ep command */ + if (!(ep->flags & BDC_EP_ENABLED)) { + dev_err(bdc->dev, "stop endpoint called for disabled ep\n"); + return -EINVAL; + } + if ((ep->flags & BDC_EP_STALL) || (ep->flags & BDC_EP_STOP)) + return 0; + + /* issue a stop endpoint command */ + cmd_sc |= BDC_CMD_EP0_XSD | BDC_SUB_CMD_EP_STP + | BDC_CMD_EPN(epnum) | BDC_CMD_EPO; + + ret = bdc_submit_cmd(bdc, cmd_sc, 0, 0, 0); + if (ret) { + dev_err(bdc->dev, + "stop endpoint command didn't complete:%d ep:%s\n", + ret, ep->name); + return ret; + } + ep->flags |= BDC_EP_STOP; + bdc_dump_epsts(bdc); + + return ret; +} diff --git a/drivers/usb/gadget/udc/bdc/bdc_cmd.h b/drivers/usb/gadget/udc/bdc/bdc_cmd.h new file mode 100644 index 000000000..533ad52fa --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc_cmd.h @@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * bdc_cmd.h - header for the BDC debug functions + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + */ +#ifndef __LINUX_BDC_CMD_H__ +#define __LINUX_BDC_CMD_H__ + +/* Command operations */ +int bdc_address_device(struct bdc *bdc, u32 add); +int bdc_config_ep(struct bdc *bdc, struct bdc_ep *ep); +int bdc_dconfig_ep(struct bdc *bdc, struct bdc_ep *ep); +int bdc_stop_ep(struct bdc *bdc, int epnum); +int bdc_ep_set_stall(struct bdc *bdc, int epnum); +int bdc_ep_clear_stall(struct bdc *bdc, int epnum); +int bdc_ep_bla(struct bdc *bdc, struct bdc_ep *ep, dma_addr_t dma_addr); +int bdc_function_wake(struct bdc *bdc, u8 intf); +int bdc_function_wake_fh(struct bdc *bdc, u8 intf); + +#endif /* __LINUX_BDC_CMD_H__ */ diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c new file mode 100644 index 000000000..9849e0c86 --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc_core.c @@ -0,0 +1,657 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * bdc_core.c - BRCM BDC USB3.0 device controller core operations + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/iopoll.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/list.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/dmapool.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/moduleparam.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/clk.h> + +#include "bdc.h" +#include "bdc_dbg.h" + +/* Poll till controller status is not OIP */ +static int poll_oip(struct bdc *bdc, u32 usec) +{ + u32 status; + int ret; + + ret = readl_poll_timeout(bdc->regs + BDC_BDCSC, status, + (BDC_CSTS(status) != BDC_OIP), 10, usec); + if (ret) + dev_err(bdc->dev, "operation timedout BDCSC: 0x%08x\n", status); + else + dev_dbg(bdc->dev, "%s complete status=%d", __func__, BDC_CSTS(status)); + + return ret; +} + +/* Stop the BDC controller */ +int bdc_stop(struct bdc *bdc) +{ + int ret; + u32 temp; + + dev_dbg(bdc->dev, "%s ()\n\n", __func__); + temp = bdc_readl(bdc->regs, BDC_BDCSC); + /* Check if BDC is already halted */ + if (BDC_CSTS(temp) == BDC_HLT) { + dev_vdbg(bdc->dev, "BDC already halted\n"); + return 0; + } + temp &= ~BDC_COP_MASK; + temp |= BDC_COS|BDC_COP_STP; + bdc_writel(bdc->regs, BDC_BDCSC, temp); + + ret = poll_oip(bdc, BDC_COP_TIMEOUT); + if (ret) + dev_err(bdc->dev, "bdc stop operation failed"); + + return ret; +} + +/* Issue a reset to BDC controller */ +int bdc_reset(struct bdc *bdc) +{ + u32 temp; + int ret; + + dev_dbg(bdc->dev, "%s ()\n", __func__); + /* First halt the controller */ + ret = bdc_stop(bdc); + if (ret) + return ret; + + temp = bdc_readl(bdc->regs, BDC_BDCSC); + temp &= ~BDC_COP_MASK; + temp |= BDC_COS|BDC_COP_RST; + bdc_writel(bdc->regs, BDC_BDCSC, temp); + ret = poll_oip(bdc, BDC_COP_TIMEOUT); + if (ret) + dev_err(bdc->dev, "bdc reset operation failed"); + + return ret; +} + +/* Run the BDC controller */ +int bdc_run(struct bdc *bdc) +{ + u32 temp; + int ret; + + dev_dbg(bdc->dev, "%s ()\n", __func__); + temp = bdc_readl(bdc->regs, BDC_BDCSC); + /* if BDC is already in running state then do not do anything */ + if (BDC_CSTS(temp) == BDC_NOR) { + dev_warn(bdc->dev, "bdc is already in running state\n"); + return 0; + } + temp &= ~BDC_COP_MASK; + temp |= BDC_COP_RUN; + temp |= BDC_COS; + bdc_writel(bdc->regs, BDC_BDCSC, temp); + ret = poll_oip(bdc, BDC_COP_TIMEOUT); + if (ret) { + dev_err(bdc->dev, "bdc run operation failed:%d", ret); + return ret; + } + temp = bdc_readl(bdc->regs, BDC_BDCSC); + if (BDC_CSTS(temp) != BDC_NOR) { + dev_err(bdc->dev, "bdc not in normal mode after RUN op :%d\n", + BDC_CSTS(temp)); + return -ESHUTDOWN; + } + + return 0; +} + +/* + * Present the termination to the host, typically called from upstream port + * event with Vbus present =1 + */ +void bdc_softconn(struct bdc *bdc) +{ + u32 uspc; + + uspc = bdc_readl(bdc->regs, BDC_USPC); + uspc &= ~BDC_PST_MASK; + uspc |= BDC_LINK_STATE_RX_DET; + uspc |= BDC_SWS; + dev_dbg(bdc->dev, "%s () uspc=%08x\n", __func__, uspc); + bdc_writel(bdc->regs, BDC_USPC, uspc); +} + +/* Remove the termination */ +void bdc_softdisconn(struct bdc *bdc) +{ + u32 uspc; + + uspc = bdc_readl(bdc->regs, BDC_USPC); + uspc |= BDC_SDC; + uspc &= ~BDC_SCN; + dev_dbg(bdc->dev, "%s () uspc=%x\n", __func__, uspc); + bdc_writel(bdc->regs, BDC_USPC, uspc); +} + +/* Set up the scratchpad buffer array and scratchpad buffers, if needed. */ +static int scratchpad_setup(struct bdc *bdc) +{ + int sp_buff_size; + u32 low32; + u32 upp32; + + sp_buff_size = BDC_SPB(bdc_readl(bdc->regs, BDC_BDCCFG0)); + dev_dbg(bdc->dev, "%s() sp_buff_size=%d\n", __func__, sp_buff_size); + if (!sp_buff_size) { + dev_dbg(bdc->dev, "Scratchpad buffer not needed\n"); + return 0; + } + /* Refer to BDC spec, Table 4 for description of SPB */ + sp_buff_size = 1 << (sp_buff_size + 5); + dev_dbg(bdc->dev, "Allocating %d bytes for scratchpad\n", sp_buff_size); + bdc->scratchpad.buff = dma_alloc_coherent(bdc->dev, sp_buff_size, + &bdc->scratchpad.sp_dma, + GFP_KERNEL); + + if (!bdc->scratchpad.buff) + goto fail; + + bdc->sp_buff_size = sp_buff_size; + bdc->scratchpad.size = sp_buff_size; + low32 = lower_32_bits(bdc->scratchpad.sp_dma); + upp32 = upper_32_bits(bdc->scratchpad.sp_dma); + cpu_to_le32s(&low32); + cpu_to_le32s(&upp32); + bdc_writel(bdc->regs, BDC_SPBBAL, low32); + bdc_writel(bdc->regs, BDC_SPBBAH, upp32); + return 0; + +fail: + bdc->scratchpad.buff = NULL; + + return -ENOMEM; +} + +/* Allocate the status report ring */ +static int setup_srr(struct bdc *bdc, int interrupter) +{ + dev_dbg(bdc->dev, "%s() NUM_SR_ENTRIES:%d\n", __func__, NUM_SR_ENTRIES); + /* Reset the SRR */ + bdc_writel(bdc->regs, BDC_SRRINT(0), BDC_SRR_RWS | BDC_SRR_RST); + bdc->srr.dqp_index = 0; + /* allocate the status report descriptors */ + bdc->srr.sr_bds = dma_alloc_coherent(bdc->dev, + NUM_SR_ENTRIES * sizeof(struct bdc_bd), + &bdc->srr.dma_addr, GFP_KERNEL); + if (!bdc->srr.sr_bds) + return -ENOMEM; + + return 0; +} + +/* Initialize the HW regs and internal data structures */ +static void bdc_mem_init(struct bdc *bdc, bool reinit) +{ + u8 size = 0; + u32 usb2_pm; + u32 low32; + u32 upp32; + u32 temp; + + dev_dbg(bdc->dev, "%s ()\n", __func__); + bdc->ep0_state = WAIT_FOR_SETUP; + bdc->dev_addr = 0; + bdc->srr.eqp_index = 0; + bdc->srr.dqp_index = 0; + bdc->zlp_needed = false; + bdc->delayed_status = false; + + bdc_writel(bdc->regs, BDC_SPBBAL, bdc->scratchpad.sp_dma); + /* Init the SRR */ + temp = BDC_SRR_RWS | BDC_SRR_RST; + /* Reset the SRR */ + bdc_writel(bdc->regs, BDC_SRRINT(0), temp); + dev_dbg(bdc->dev, "bdc->srr.sr_bds =%p\n", bdc->srr.sr_bds); + temp = lower_32_bits(bdc->srr.dma_addr); + size = fls(NUM_SR_ENTRIES) - 2; + temp |= size; + dev_dbg(bdc->dev, "SRRBAL[0]=%08x NUM_SR_ENTRIES:%d size:%d\n", + temp, NUM_SR_ENTRIES, size); + + low32 = lower_32_bits(temp); + upp32 = upper_32_bits(bdc->srr.dma_addr); + cpu_to_le32s(&low32); + cpu_to_le32s(&upp32); + + /* Write the dma addresses into regs*/ + bdc_writel(bdc->regs, BDC_SRRBAL(0), low32); + bdc_writel(bdc->regs, BDC_SRRBAH(0), upp32); + + temp = bdc_readl(bdc->regs, BDC_SRRINT(0)); + temp |= BDC_SRR_IE; + temp &= ~(BDC_SRR_RST | BDC_SRR_RWS); + bdc_writel(bdc->regs, BDC_SRRINT(0), temp); + + /* Set the Interrupt Coalescence ~500 usec */ + temp = bdc_readl(bdc->regs, BDC_INTCTLS(0)); + temp &= ~0xffff; + temp |= INT_CLS; + bdc_writel(bdc->regs, BDC_INTCTLS(0), temp); + + usb2_pm = bdc_readl(bdc->regs, BDC_USPPM2); + dev_dbg(bdc->dev, "usb2_pm=%08x", usb2_pm); + /* Enable hardware LPM Enable */ + usb2_pm |= BDC_HLE; + bdc_writel(bdc->regs, BDC_USPPM2, usb2_pm); + + /* readback for debug */ + usb2_pm = bdc_readl(bdc->regs, BDC_USPPM2); + dev_dbg(bdc->dev, "usb2_pm=%08x\n", usb2_pm); + + /* Disable any unwanted SR's on SRR */ + temp = bdc_readl(bdc->regs, BDC_BDCSC); + /* We don't want Microframe counter wrap SR */ + temp |= BDC_MASK_MCW; + bdc_writel(bdc->regs, BDC_BDCSC, temp); + + /* + * In some error cases, driver has to reset the entire BDC controller + * in that case reinit is passed as 1 + */ + if (reinit) { + int i; + /* Enable interrupts */ + temp = bdc_readl(bdc->regs, BDC_BDCSC); + temp |= BDC_GIE; + bdc_writel(bdc->regs, BDC_BDCSC, temp); + /* Init scratchpad to 0 */ + memset(bdc->scratchpad.buff, 0, bdc->sp_buff_size); + /* Initialize SRR to 0 */ + memset(bdc->srr.sr_bds, 0, + NUM_SR_ENTRIES * sizeof(struct bdc_bd)); + /* + * clear ep flags to avoid post disconnect stops/deconfigs but + * not during S2 exit + */ + if (!bdc->gadget.speed) + for (i = 1; i < bdc->num_eps; ++i) + bdc->bdc_ep_array[i]->flags = 0; + } else { + /* One time initiaization only */ + /* Enable status report function pointers */ + bdc->sr_handler[0] = bdc_sr_xsf; + bdc->sr_handler[1] = bdc_sr_uspc; + + /* EP0 status report function pointers */ + bdc->sr_xsf_ep0[0] = bdc_xsf_ep0_setup_recv; + bdc->sr_xsf_ep0[1] = bdc_xsf_ep0_data_start; + bdc->sr_xsf_ep0[2] = bdc_xsf_ep0_status_start; + } +} + +/* Free the dynamic memory */ +static void bdc_mem_free(struct bdc *bdc) +{ + dev_dbg(bdc->dev, "%s\n", __func__); + /* Free SRR */ + if (bdc->srr.sr_bds) + dma_free_coherent(bdc->dev, + NUM_SR_ENTRIES * sizeof(struct bdc_bd), + bdc->srr.sr_bds, bdc->srr.dma_addr); + + /* Free scratchpad */ + if (bdc->scratchpad.buff) + dma_free_coherent(bdc->dev, bdc->sp_buff_size, + bdc->scratchpad.buff, bdc->scratchpad.sp_dma); + + /* Destroy the dma pools */ + dma_pool_destroy(bdc->bd_table_pool); + + /* Free the bdc_ep array */ + kfree(bdc->bdc_ep_array); + + bdc->srr.sr_bds = NULL; + bdc->scratchpad.buff = NULL; + bdc->bd_table_pool = NULL; + bdc->bdc_ep_array = NULL; +} + +/* + * bdc reinit gives a controller reset and reinitialize the registers, + * called from disconnect/bus reset scenario's, to ensure proper HW cleanup + */ +int bdc_reinit(struct bdc *bdc) +{ + int ret; + + dev_dbg(bdc->dev, "%s\n", __func__); + ret = bdc_stop(bdc); + if (ret) + goto out; + + ret = bdc_reset(bdc); + if (ret) + goto out; + + /* the reinit flag is 1 */ + bdc_mem_init(bdc, true); + ret = bdc_run(bdc); +out: + bdc->reinit = false; + + return ret; +} + +/* Allocate all the dyanmic memory */ +static int bdc_mem_alloc(struct bdc *bdc) +{ + u32 page_size; + unsigned int num_ieps, num_oeps; + + dev_dbg(bdc->dev, + "%s() NUM_BDS_PER_TABLE:%d\n", __func__, + NUM_BDS_PER_TABLE); + page_size = BDC_PGS(bdc_readl(bdc->regs, BDC_BDCCFG0)); + /* page size is 2^pgs KB */ + page_size = 1 << page_size; + /* KB */ + page_size <<= 10; + dev_dbg(bdc->dev, "page_size=%d\n", page_size); + + /* Create a pool of bd tables */ + bdc->bd_table_pool = + dma_pool_create("BDC BD tables", bdc->dev, NUM_BDS_PER_TABLE * 16, + 16, page_size); + + if (!bdc->bd_table_pool) + goto fail; + + if (scratchpad_setup(bdc)) + goto fail; + + /* read from regs */ + num_ieps = NUM_NCS(bdc_readl(bdc->regs, BDC_FSCNIC)); + num_oeps = NUM_NCS(bdc_readl(bdc->regs, BDC_FSCNOC)); + /* +2: 1 for ep0 and the other is rsvd i.e. bdc_ep[0] is rsvd */ + bdc->num_eps = num_ieps + num_oeps + 2; + dev_dbg(bdc->dev, + "ieps:%d eops:%d num_eps:%d\n", + num_ieps, num_oeps, bdc->num_eps); + /* allocate array of ep pointers */ + bdc->bdc_ep_array = kcalloc(bdc->num_eps, sizeof(struct bdc_ep *), + GFP_KERNEL); + if (!bdc->bdc_ep_array) + goto fail; + + dev_dbg(bdc->dev, "Allocating sr report0\n"); + if (setup_srr(bdc, 0)) + goto fail; + + return 0; +fail: + dev_warn(bdc->dev, "Couldn't initialize memory\n"); + bdc_mem_free(bdc); + + return -ENOMEM; +} + +/* opposite to bdc_hw_init */ +static void bdc_hw_exit(struct bdc *bdc) +{ + dev_dbg(bdc->dev, "%s ()\n", __func__); + bdc_mem_free(bdc); +} + +/* Initialize the bdc HW and memory */ +static int bdc_hw_init(struct bdc *bdc) +{ + int ret; + + dev_dbg(bdc->dev, "%s ()\n", __func__); + ret = bdc_reset(bdc); + if (ret) { + dev_err(bdc->dev, "err resetting bdc abort bdc init%d\n", ret); + return ret; + } + ret = bdc_mem_alloc(bdc); + if (ret) { + dev_err(bdc->dev, "Mem alloc failed, aborting\n"); + return -ENOMEM; + } + bdc_mem_init(bdc, 0); + bdc_dbg_regs(bdc); + dev_dbg(bdc->dev, "HW Init done\n"); + + return 0; +} + +static int bdc_phy_init(struct bdc *bdc) +{ + int phy_num; + int ret; + + for (phy_num = 0; phy_num < bdc->num_phys; phy_num++) { + ret = phy_init(bdc->phys[phy_num]); + if (ret) + goto err_exit_phy; + ret = phy_power_on(bdc->phys[phy_num]); + if (ret) { + phy_exit(bdc->phys[phy_num]); + goto err_exit_phy; + } + } + + return 0; + +err_exit_phy: + while (--phy_num >= 0) { + phy_power_off(bdc->phys[phy_num]); + phy_exit(bdc->phys[phy_num]); + } + + return ret; +} + +static void bdc_phy_exit(struct bdc *bdc) +{ + int phy_num; + + for (phy_num = 0; phy_num < bdc->num_phys; phy_num++) { + phy_power_off(bdc->phys[phy_num]); + phy_exit(bdc->phys[phy_num]); + } +} + +static int bdc_probe(struct platform_device *pdev) +{ + struct bdc *bdc; + int ret; + int irq; + u32 temp; + struct device *dev = &pdev->dev; + int phy_num; + + dev_dbg(dev, "%s()\n", __func__); + + bdc = devm_kzalloc(dev, sizeof(*bdc), GFP_KERNEL); + if (!bdc) + return -ENOMEM; + + bdc->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(bdc->regs)) + return PTR_ERR(bdc->regs); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + spin_lock_init(&bdc->lock); + platform_set_drvdata(pdev, bdc); + bdc->irq = irq; + bdc->dev = dev; + dev_dbg(dev, "bdc->regs: %p irq=%d\n", bdc->regs, bdc->irq); + + bdc->num_phys = of_count_phandle_with_args(dev->of_node, + "phys", "#phy-cells"); + if (bdc->num_phys > 0) { + bdc->phys = devm_kcalloc(dev, bdc->num_phys, + sizeof(struct phy *), GFP_KERNEL); + if (!bdc->phys) + return -ENOMEM; + } else { + bdc->num_phys = 0; + } + dev_info(dev, "Using %d phy(s)\n", bdc->num_phys); + + for (phy_num = 0; phy_num < bdc->num_phys; phy_num++) { + bdc->phys[phy_num] = devm_of_phy_get_by_index( + dev, dev->of_node, phy_num); + if (IS_ERR(bdc->phys[phy_num])) { + ret = PTR_ERR(bdc->phys[phy_num]); + dev_err(bdc->dev, + "BDC phy specified but not found:%d\n", ret); + return ret; + } + } + + bdc->clk = devm_clk_get_optional(dev, "sw_usbd"); + if (IS_ERR(bdc->clk)) + return PTR_ERR(bdc->clk); + + ret = clk_prepare_enable(bdc->clk); + if (ret) { + dev_err(dev, "could not enable clock\n"); + return ret; + } + + ret = bdc_phy_init(bdc); + if (ret) { + dev_err(bdc->dev, "BDC phy init failure:%d\n", ret); + goto disable_clk; + } + + temp = bdc_readl(bdc->regs, BDC_BDCCAP1); + if ((temp & BDC_P64) && + !dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64))) { + dev_dbg(dev, "Using 64-bit address\n"); + } else { + ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32)); + if (ret) { + dev_err(dev, + "No suitable DMA config available, abort\n"); + ret = -ENOTSUPP; + goto phycleanup; + } + dev_dbg(dev, "Using 32-bit address\n"); + } + ret = bdc_hw_init(bdc); + if (ret) { + dev_err(dev, "BDC init failure:%d\n", ret); + goto phycleanup; + } + ret = bdc_udc_init(bdc); + if (ret) { + dev_err(dev, "BDC Gadget init failure:%d\n", ret); + goto cleanup; + } + return 0; + +cleanup: + bdc_hw_exit(bdc); +phycleanup: + bdc_phy_exit(bdc); +disable_clk: + clk_disable_unprepare(bdc->clk); + return ret; +} + +static int bdc_remove(struct platform_device *pdev) +{ + struct bdc *bdc; + + bdc = platform_get_drvdata(pdev); + dev_dbg(bdc->dev, "%s ()\n", __func__); + bdc_udc_exit(bdc); + bdc_hw_exit(bdc); + bdc_phy_exit(bdc); + clk_disable_unprepare(bdc->clk); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int bdc_suspend(struct device *dev) +{ + struct bdc *bdc = dev_get_drvdata(dev); + int ret; + + /* Halt the controller */ + ret = bdc_stop(bdc); + if (!ret) + clk_disable_unprepare(bdc->clk); + + return ret; +} + +static int bdc_resume(struct device *dev) +{ + struct bdc *bdc = dev_get_drvdata(dev); + int ret; + + ret = clk_prepare_enable(bdc->clk); + if (ret) { + dev_err(bdc->dev, "err enabling the clock\n"); + return ret; + } + ret = bdc_reinit(bdc); + if (ret) { + dev_err(bdc->dev, "err in bdc reinit\n"); + clk_disable_unprepare(bdc->clk); + return ret; + } + + return 0; +} + +#endif /* CONFIG_PM_SLEEP */ + +static SIMPLE_DEV_PM_OPS(bdc_pm_ops, bdc_suspend, + bdc_resume); + +static const struct of_device_id bdc_of_match[] = { + { .compatible = "brcm,bdc-udc-v2" }, + { .compatible = "brcm,bdc" }, + { /* sentinel */ } +}; + +static struct platform_driver bdc_driver = { + .driver = { + .name = BRCM_BDC_NAME, + .pm = &bdc_pm_ops, + .of_match_table = bdc_of_match, + }, + .probe = bdc_probe, + .remove = bdc_remove, +}; + +module_platform_driver(bdc_driver); +MODULE_AUTHOR("Ashwini Pahuja <ashwini.linux@gmail.com>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(BRCM_BDC_DESC); diff --git a/drivers/usb/gadget/udc/bdc/bdc_dbg.c b/drivers/usb/gadget/udc/bdc/bdc_dbg.c new file mode 100644 index 000000000..9c03e1330 --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc_dbg.c @@ -0,0 +1,118 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * bdc_dbg.c - BRCM BDC USB3.0 device controller debug functions + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + */ + +#include "bdc.h" +#include "bdc_dbg.h" + +void bdc_dbg_regs(struct bdc *bdc) +{ + u32 temp; + + dev_vdbg(bdc->dev, "bdc->regs:%p\n", bdc->regs); + temp = bdc_readl(bdc->regs, BDC_BDCCFG0); + dev_vdbg(bdc->dev, "bdccfg0:0x%08x\n", temp); + temp = bdc_readl(bdc->regs, BDC_BDCCFG1); + dev_vdbg(bdc->dev, "bdccfg1:0x%08x\n", temp); + temp = bdc_readl(bdc->regs, BDC_BDCCAP0); + dev_vdbg(bdc->dev, "bdccap0:0x%08x\n", temp); + temp = bdc_readl(bdc->regs, BDC_BDCCAP1); + dev_vdbg(bdc->dev, "bdccap1:0x%08x\n", temp); + temp = bdc_readl(bdc->regs, BDC_USPC); + dev_vdbg(bdc->dev, "uspc:0x%08x\n", temp); + temp = bdc_readl(bdc->regs, BDC_DVCSA); + dev_vdbg(bdc->dev, "dvcsa:0x%08x\n", temp); + temp = bdc_readl(bdc->regs, BDC_DVCSB); + dev_vdbg(bdc->dev, "dvcsb:0x%x08\n", temp); +} + +void bdc_dump_epsts(struct bdc *bdc) +{ + u32 temp; + + temp = bdc_readl(bdc->regs, BDC_EPSTS0); + dev_vdbg(bdc->dev, "BDC_EPSTS0:0x%08x\n", temp); + + temp = bdc_readl(bdc->regs, BDC_EPSTS1); + dev_vdbg(bdc->dev, "BDC_EPSTS1:0x%x\n", temp); + + temp = bdc_readl(bdc->regs, BDC_EPSTS2); + dev_vdbg(bdc->dev, "BDC_EPSTS2:0x%08x\n", temp); + + temp = bdc_readl(bdc->regs, BDC_EPSTS3); + dev_vdbg(bdc->dev, "BDC_EPSTS3:0x%08x\n", temp); + + temp = bdc_readl(bdc->regs, BDC_EPSTS4); + dev_vdbg(bdc->dev, "BDC_EPSTS4:0x%08x\n", temp); + + temp = bdc_readl(bdc->regs, BDC_EPSTS5); + dev_vdbg(bdc->dev, "BDC_EPSTS5:0x%08x\n", temp); + + temp = bdc_readl(bdc->regs, BDC_EPSTS6); + dev_vdbg(bdc->dev, "BDC_EPSTS6:0x%08x\n", temp); + + temp = bdc_readl(bdc->regs, BDC_EPSTS7); + dev_vdbg(bdc->dev, "BDC_EPSTS7:0x%08x\n", temp); +} + +void bdc_dbg_srr(struct bdc *bdc, u32 srr_num) +{ + struct bdc_sr *sr; + dma_addr_t addr; + int i; + + sr = bdc->srr.sr_bds; + addr = bdc->srr.dma_addr; + dev_vdbg(bdc->dev, "%s sr:%p dqp_index:%d\n", __func__, + sr, bdc->srr.dqp_index); + for (i = 0; i < NUM_SR_ENTRIES; i++) { + sr = &bdc->srr.sr_bds[i]; + dev_vdbg(bdc->dev, "%llx %08x %08x %08x %08x\n", + (unsigned long long)addr, + le32_to_cpu(sr->offset[0]), + le32_to_cpu(sr->offset[1]), + le32_to_cpu(sr->offset[2]), + le32_to_cpu(sr->offset[3])); + addr += sizeof(*sr); + } +} + +void bdc_dbg_bd_list(struct bdc *bdc, struct bdc_ep *ep) +{ + struct bd_list *bd_list = &ep->bd_list; + struct bd_table *bd_table; + struct bdc_bd *bd; + int tbi, bdi, gbdi; + dma_addr_t dma; + + gbdi = 0; + dev_vdbg(bdc->dev, + "Dump bd list for %s epnum:%d\n", + ep->name, ep->ep_num); + + dev_vdbg(bdc->dev, + "tabs:%d max_bdi:%d eqp_bdi:%d hwd_bdi:%d num_bds_table:%d\n", + bd_list->num_tabs, bd_list->max_bdi, bd_list->eqp_bdi, + bd_list->hwd_bdi, bd_list->num_bds_table); + + for (tbi = 0; tbi < bd_list->num_tabs; tbi++) { + bd_table = bd_list->bd_table_array[tbi]; + for (bdi = 0; bdi < bd_list->num_bds_table; bdi++) { + bd = bd_table->start_bd + bdi; + dma = bd_table->dma + (sizeof(struct bdc_bd) * bdi); + dev_vdbg(bdc->dev, + "tbi:%2d bdi:%2d gbdi:%2d virt:%p phys:%llx %08x %08x %08x %08x\n", + tbi, bdi, gbdi++, bd, (unsigned long long)dma, + le32_to_cpu(bd->offset[0]), + le32_to_cpu(bd->offset[1]), + le32_to_cpu(bd->offset[2]), + le32_to_cpu(bd->offset[3])); + } + dev_vdbg(bdc->dev, "\n\n"); + } +} diff --git a/drivers/usb/gadget/udc/bdc/bdc_dbg.h b/drivers/usb/gadget/udc/bdc/bdc_dbg.h new file mode 100644 index 000000000..acd8332f8 --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc_dbg.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * bdc_dbg.h - header for the BDC debug functions + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + */ +#ifndef __LINUX_BDC_DBG_H__ +#define __LINUX_BDC_DBG_H__ + +#include "bdc.h" + +#ifdef CONFIG_USB_GADGET_VERBOSE +void bdc_dbg_bd_list(struct bdc *bdc, struct bdc_ep *ep); +void bdc_dbg_srr(struct bdc *bdc, u32 srr_num); +void bdc_dbg_regs(struct bdc *bdc); +void bdc_dump_epsts(struct bdc *bdc); +#else +static inline void bdc_dbg_regs(struct bdc *bdc) +{ } + +static inline void bdc_dbg_srr(struct bdc *bdc, u32 srr_num) +{ } + +static inline void bdc_dbg_bd_list(struct bdc *bdc, struct bdc_ep *ep) +{ } + +static inline void bdc_dump_epsts(struct bdc *bdc) +{ } +#endif /* CONFIG_USB_GADGET_VERBOSE */ +#endif /* __LINUX_BDC_DBG_H__ */ diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.c b/drivers/usb/gadget/udc/bdc/bdc_ep.c new file mode 100644 index 000000000..fa88f210e --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc_ep.c @@ -0,0 +1,2035 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * bdc_ep.c - BRCM BDC USB3.0 device controller endpoint related functions + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + * + * Based on drivers under drivers/usb/ + */ +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/dmapool.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/otg.h> +#include <linux/pm.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <asm/unaligned.h> +#include <linux/platform_device.h> +#include <linux/usb/composite.h> + +#include "bdc.h" +#include "bdc_ep.h" +#include "bdc_cmd.h" +#include "bdc_dbg.h" + +static const char * const ep0_state_string[] = { + "WAIT_FOR_SETUP", + "WAIT_FOR_DATA_START", + "WAIT_FOR_DATA_XMIT", + "WAIT_FOR_STATUS_START", + "WAIT_FOR_STATUS_XMIT", + "STATUS_PENDING" +}; + +/* Free the bdl during ep disable */ +static void ep_bd_list_free(struct bdc_ep *ep, u32 num_tabs) +{ + struct bd_list *bd_list = &ep->bd_list; + struct bdc *bdc = ep->bdc; + struct bd_table *bd_table; + int index; + + dev_dbg(bdc->dev, "%s ep:%s num_tabs:%d\n", + __func__, ep->name, num_tabs); + + if (!bd_list->bd_table_array) { + dev_dbg(bdc->dev, "%s already freed\n", ep->name); + return; + } + for (index = 0; index < num_tabs; index++) { + /* + * check if the bd_table struct is allocated ? + * if yes, then check if bd memory has been allocated, then + * free the dma_pool and also the bd_table struct memory + */ + bd_table = bd_list->bd_table_array[index]; + dev_dbg(bdc->dev, "bd_table:%p index:%d\n", bd_table, index); + if (!bd_table) { + dev_dbg(bdc->dev, "bd_table not allocated\n"); + continue; + } + if (!bd_table->start_bd) { + dev_dbg(bdc->dev, "bd dma pool not allocated\n"); + continue; + } + + dev_dbg(bdc->dev, + "Free dma pool start_bd:%p dma:%llx\n", + bd_table->start_bd, + (unsigned long long)bd_table->dma); + + dma_pool_free(bdc->bd_table_pool, + bd_table->start_bd, + bd_table->dma); + /* Free the bd_table structure */ + kfree(bd_table); + } + /* Free the bd table array */ + kfree(ep->bd_list.bd_table_array); +} + +/* + * chain the tables, by insteting a chain bd at the end of prev_table, pointing + * to next_table + */ +static inline void chain_table(struct bd_table *prev_table, + struct bd_table *next_table, + u32 bd_p_tab) +{ + /* Chain the prev table to next table */ + prev_table->start_bd[bd_p_tab-1].offset[0] = + cpu_to_le32(lower_32_bits(next_table->dma)); + + prev_table->start_bd[bd_p_tab-1].offset[1] = + cpu_to_le32(upper_32_bits(next_table->dma)); + + prev_table->start_bd[bd_p_tab-1].offset[2] = + 0x0; + + prev_table->start_bd[bd_p_tab-1].offset[3] = + cpu_to_le32(MARK_CHAIN_BD); +} + +/* Allocate the bdl for ep, during config ep */ +static int ep_bd_list_alloc(struct bdc_ep *ep) +{ + struct bd_table *prev_table = NULL; + int index, num_tabs, bd_p_tab; + struct bdc *bdc = ep->bdc; + struct bd_table *bd_table; + dma_addr_t dma; + + if (usb_endpoint_xfer_isoc(ep->desc)) + num_tabs = NUM_TABLES_ISOCH; + else + num_tabs = NUM_TABLES; + + bd_p_tab = NUM_BDS_PER_TABLE; + /* if there is only 1 table in bd list then loop chain to self */ + dev_dbg(bdc->dev, + "%s ep:%p num_tabs:%d\n", + __func__, ep, num_tabs); + + /* Allocate memory for table array */ + ep->bd_list.bd_table_array = kcalloc(num_tabs, + sizeof(struct bd_table *), + GFP_ATOMIC); + if (!ep->bd_list.bd_table_array) + return -ENOMEM; + + /* Allocate memory for each table */ + for (index = 0; index < num_tabs; index++) { + /* Allocate memory for bd_table structure */ + bd_table = kzalloc(sizeof(*bd_table), GFP_ATOMIC); + if (!bd_table) + goto fail; + + bd_table->start_bd = dma_pool_zalloc(bdc->bd_table_pool, + GFP_ATOMIC, + &dma); + if (!bd_table->start_bd) { + kfree(bd_table); + goto fail; + } + + bd_table->dma = dma; + + dev_dbg(bdc->dev, + "index:%d start_bd:%p dma=%08llx prev_table:%p\n", + index, bd_table->start_bd, + (unsigned long long)bd_table->dma, prev_table); + + ep->bd_list.bd_table_array[index] = bd_table; + if (prev_table) + chain_table(prev_table, bd_table, bd_p_tab); + + prev_table = bd_table; + } + chain_table(prev_table, ep->bd_list.bd_table_array[0], bd_p_tab); + /* Memory allocation is successful, now init the internal fields */ + ep->bd_list.num_tabs = num_tabs; + ep->bd_list.max_bdi = (num_tabs * bd_p_tab) - 1; + ep->bd_list.num_tabs = num_tabs; + ep->bd_list.num_bds_table = bd_p_tab; + ep->bd_list.eqp_bdi = 0; + ep->bd_list.hwd_bdi = 0; + + return 0; +fail: + /* Free the bd_table_array, bd_table struct, bd's */ + ep_bd_list_free(ep, num_tabs); + + return -ENOMEM; +} + +/* returns how many bd's are need for this transfer */ +static inline int bd_needed_req(struct bdc_req *req) +{ + int bd_needed = 0; + int remaining; + + /* 1 bd needed for 0 byte transfer */ + if (req->usb_req.length == 0) + return 1; + + /* remaining bytes after tranfering all max BD size BD's */ + remaining = req->usb_req.length % BD_MAX_BUFF_SIZE; + if (remaining) + bd_needed++; + + /* How many maximum BUFF size BD's ? */ + remaining = req->usb_req.length / BD_MAX_BUFF_SIZE; + bd_needed += remaining; + + return bd_needed; +} + +/* returns the bd index(bdi) corresponding to bd dma address */ +static int bd_add_to_bdi(struct bdc_ep *ep, dma_addr_t bd_dma_addr) +{ + struct bd_list *bd_list = &ep->bd_list; + dma_addr_t dma_first_bd, dma_last_bd; + struct bdc *bdc = ep->bdc; + struct bd_table *bd_table; + bool found = false; + int tbi, bdi; + + dma_first_bd = dma_last_bd = 0; + dev_dbg(bdc->dev, "%s %llx\n", + __func__, (unsigned long long)bd_dma_addr); + /* + * Find in which table this bd_dma_addr belongs?, go through the table + * array and compare addresses of first and last address of bd of each + * table + */ + for (tbi = 0; tbi < bd_list->num_tabs; tbi++) { + bd_table = bd_list->bd_table_array[tbi]; + dma_first_bd = bd_table->dma; + dma_last_bd = bd_table->dma + + (sizeof(struct bdc_bd) * + (bd_list->num_bds_table - 1)); + dev_dbg(bdc->dev, "dma_first_bd:%llx dma_last_bd:%llx\n", + (unsigned long long)dma_first_bd, + (unsigned long long)dma_last_bd); + if (bd_dma_addr >= dma_first_bd && bd_dma_addr <= dma_last_bd) { + found = true; + break; + } + } + if (unlikely(!found)) { + dev_err(bdc->dev, "%s FATAL err, bd not found\n", __func__); + return -EINVAL; + } + /* Now we know the table, find the bdi */ + bdi = (bd_dma_addr - dma_first_bd) / sizeof(struct bdc_bd); + + /* return the global bdi, to compare with ep eqp_bdi */ + return (bdi + (tbi * bd_list->num_bds_table)); +} + +/* returns the table index(tbi) of the given bdi */ +static int bdi_to_tbi(struct bdc_ep *ep, int bdi) +{ + int tbi; + + tbi = bdi / ep->bd_list.num_bds_table; + dev_vdbg(ep->bdc->dev, + "bdi:%d num_bds_table:%d tbi:%d\n", + bdi, ep->bd_list.num_bds_table, tbi); + + return tbi; +} + +/* Find the bdi last bd in the transfer */ +static inline int find_end_bdi(struct bdc_ep *ep, int next_hwd_bdi) +{ + int end_bdi; + + end_bdi = next_hwd_bdi - 1; + if (end_bdi < 0) + end_bdi = ep->bd_list.max_bdi - 1; + else if ((end_bdi % (ep->bd_list.num_bds_table-1)) == 0) + end_bdi--; + + return end_bdi; +} + +/* + * How many transfer bd's are available on this ep bdl, chain bds are not + * counted in available bds + */ +static int bd_available_ep(struct bdc_ep *ep) +{ + struct bd_list *bd_list = &ep->bd_list; + int available1, available2; + struct bdc *bdc = ep->bdc; + int chain_bd1, chain_bd2; + int available_bd = 0; + + available1 = available2 = chain_bd1 = chain_bd2 = 0; + /* if empty then we have all bd's available - number of chain bd's */ + if (bd_list->eqp_bdi == bd_list->hwd_bdi) + return bd_list->max_bdi - bd_list->num_tabs; + + /* + * Depending upon where eqp and dqp pointers are, caculate number + * of avaialble bd's + */ + if (bd_list->hwd_bdi < bd_list->eqp_bdi) { + /* available bd's are from eqp..max_bds + 0..dqp - chain_bds */ + available1 = bd_list->max_bdi - bd_list->eqp_bdi; + available2 = bd_list->hwd_bdi; + chain_bd1 = available1 / bd_list->num_bds_table; + chain_bd2 = available2 / bd_list->num_bds_table; + dev_vdbg(bdc->dev, "chain_bd1:%d chain_bd2:%d\n", + chain_bd1, chain_bd2); + available_bd = available1 + available2 - chain_bd1 - chain_bd2; + } else { + /* available bd's are from eqp..dqp - number of chain bd's */ + available1 = bd_list->hwd_bdi - bd_list->eqp_bdi; + /* if gap between eqp and dqp is less than NUM_BDS_PER_TABLE */ + if ((bd_list->hwd_bdi - bd_list->eqp_bdi) + <= bd_list->num_bds_table) { + /* If there any chain bd in between */ + if (!(bdi_to_tbi(ep, bd_list->hwd_bdi) + == bdi_to_tbi(ep, bd_list->eqp_bdi))) { + available_bd = available1 - 1; + } + } else { + chain_bd1 = available1 / bd_list->num_bds_table; + available_bd = available1 - chain_bd1; + } + } + /* + * we need to keep one extra bd to check if ring is full or empty so + * reduce by 1 + */ + available_bd--; + dev_vdbg(bdc->dev, "available_bd:%d\n", available_bd); + + return available_bd; +} + +/* Notify the hardware after queueing the bd to bdl */ +void bdc_notify_xfr(struct bdc *bdc, u32 epnum) +{ + struct bdc_ep *ep = bdc->bdc_ep_array[epnum]; + + dev_vdbg(bdc->dev, "%s epnum:%d\n", __func__, epnum); + /* + * We don't have anyway to check if ep state is running, + * except the software flags. + */ + if (unlikely(ep->flags & BDC_EP_STOP)) + ep->flags &= ~BDC_EP_STOP; + + bdc_writel(bdc->regs, BDC_XSFNTF, epnum); +} + +/* returns the bd corresponding to bdi */ +static struct bdc_bd *bdi_to_bd(struct bdc_ep *ep, int bdi) +{ + int tbi = bdi_to_tbi(ep, bdi); + int local_bdi = 0; + + local_bdi = bdi - (tbi * ep->bd_list.num_bds_table); + dev_vdbg(ep->bdc->dev, + "%s bdi:%d local_bdi:%d\n", + __func__, bdi, local_bdi); + + return (ep->bd_list.bd_table_array[tbi]->start_bd + local_bdi); +} + +/* Advance the enqueue pointer */ +static void ep_bdlist_eqp_adv(struct bdc_ep *ep) +{ + ep->bd_list.eqp_bdi++; + /* if it's chain bd, then move to next */ + if (((ep->bd_list.eqp_bdi + 1) % ep->bd_list.num_bds_table) == 0) + ep->bd_list.eqp_bdi++; + + /* if the eqp is pointing to last + 1 then move back to 0 */ + if (ep->bd_list.eqp_bdi == (ep->bd_list.max_bdi + 1)) + ep->bd_list.eqp_bdi = 0; +} + +/* Setup the first bd for ep0 transfer */ +static int setup_first_bd_ep0(struct bdc *bdc, struct bdc_req *req, u32 *dword3) +{ + u16 wValue; + u32 req_len; + + req->ep->dir = 0; + req_len = req->usb_req.length; + switch (bdc->ep0_state) { + case WAIT_FOR_DATA_START: + *dword3 |= BD_TYPE_DS; + if (bdc->setup_pkt.bRequestType & USB_DIR_IN) + *dword3 |= BD_DIR_IN; + + /* check if zlp will be needed */ + wValue = le16_to_cpu(bdc->setup_pkt.wValue); + if ((wValue > req_len) && + (req_len % bdc->gadget.ep0->maxpacket == 0)) { + dev_dbg(bdc->dev, "ZLP needed wVal:%d len:%d MaxP:%d\n", + wValue, req_len, + bdc->gadget.ep0->maxpacket); + bdc->zlp_needed = true; + } + break; + + case WAIT_FOR_STATUS_START: + *dword3 |= BD_TYPE_SS; + if (!le16_to_cpu(bdc->setup_pkt.wLength) || + !(bdc->setup_pkt.bRequestType & USB_DIR_IN)) + *dword3 |= BD_DIR_IN; + break; + default: + dev_err(bdc->dev, + "Unknown ep0 state for queueing bd ep0_state:%s\n", + ep0_state_string[bdc->ep0_state]); + return -EINVAL; + } + + return 0; +} + +/* Setup the bd dma descriptor for a given request */ +static int setup_bd_list_xfr(struct bdc *bdc, struct bdc_req *req, int num_bds) +{ + dma_addr_t buf_add = req->usb_req.dma; + u32 maxp, tfs, dword2, dword3; + struct bd_transfer *bd_xfr; + struct bd_list *bd_list; + struct bdc_ep *ep; + struct bdc_bd *bd; + int ret, bdnum; + u32 req_len; + + ep = req->ep; + bd_list = &ep->bd_list; + bd_xfr = &req->bd_xfr; + bd_xfr->req = req; + bd_xfr->start_bdi = bd_list->eqp_bdi; + bd = bdi_to_bd(ep, bd_list->eqp_bdi); + req_len = req->usb_req.length; + maxp = usb_endpoint_maxp(ep->desc); + tfs = roundup(req->usb_req.length, maxp); + tfs = tfs/maxp; + dev_vdbg(bdc->dev, "%s ep:%s num_bds:%d tfs:%d r_len:%d bd:%p\n", + __func__, ep->name, num_bds, tfs, req_len, bd); + + for (bdnum = 0; bdnum < num_bds; bdnum++) { + dword2 = dword3 = 0; + /* First bd */ + if (!bdnum) { + dword3 |= BD_SOT|BD_SBF|(tfs<<BD_TFS_SHIFT); + dword2 |= BD_LTF; + /* format of first bd for ep0 is different than other */ + if (ep->ep_num == 1) { + ret = setup_first_bd_ep0(bdc, req, &dword3); + if (ret) + return ret; + } + } + if (!req->ep->dir) + dword3 |= BD_ISP; + + if (req_len > BD_MAX_BUFF_SIZE) { + dword2 |= BD_MAX_BUFF_SIZE; + req_len -= BD_MAX_BUFF_SIZE; + } else { + /* this should be the last bd */ + dword2 |= req_len; + dword3 |= BD_IOC; + dword3 |= BD_EOT; + } + /* Currently only 1 INT target is supported */ + dword2 |= BD_INTR_TARGET(0); + bd = bdi_to_bd(ep, ep->bd_list.eqp_bdi); + if (unlikely(!bd)) { + dev_err(bdc->dev, "Err bd pointing to wrong addr\n"); + return -EINVAL; + } + /* write bd */ + bd->offset[0] = cpu_to_le32(lower_32_bits(buf_add)); + bd->offset[1] = cpu_to_le32(upper_32_bits(buf_add)); + bd->offset[2] = cpu_to_le32(dword2); + bd->offset[3] = cpu_to_le32(dword3); + /* advance eqp pointer */ + ep_bdlist_eqp_adv(ep); + /* advance the buff pointer */ + buf_add += BD_MAX_BUFF_SIZE; + dev_vdbg(bdc->dev, "buf_add:%08llx req_len:%d bd:%p eqp:%d\n", + (unsigned long long)buf_add, req_len, bd, + ep->bd_list.eqp_bdi); + bd = bdi_to_bd(ep, ep->bd_list.eqp_bdi); + bd->offset[3] = cpu_to_le32(BD_SBF); + } + /* clear the STOP BD fetch bit from the first bd of this xfr */ + bd = bdi_to_bd(ep, bd_xfr->start_bdi); + bd->offset[3] &= cpu_to_le32(~BD_SBF); + /* the new eqp will be next hw dqp */ + bd_xfr->num_bds = num_bds; + bd_xfr->next_hwd_bdi = ep->bd_list.eqp_bdi; + /* everything is written correctly before notifying the HW */ + wmb(); + + return 0; +} + +/* Queue the xfr */ +static int bdc_queue_xfr(struct bdc *bdc, struct bdc_req *req) +{ + int num_bds, bd_available; + struct bdc_ep *ep; + int ret; + + ep = req->ep; + dev_dbg(bdc->dev, "%s req:%p\n", __func__, req); + dev_dbg(bdc->dev, "eqp_bdi:%d hwd_bdi:%d\n", + ep->bd_list.eqp_bdi, ep->bd_list.hwd_bdi); + + num_bds = bd_needed_req(req); + bd_available = bd_available_ep(ep); + + /* how many bd's are avaialble on ep */ + if (num_bds > bd_available) + return -ENOMEM; + + ret = setup_bd_list_xfr(bdc, req, num_bds); + if (ret) + return ret; + list_add_tail(&req->queue, &ep->queue); + bdc_dbg_bd_list(bdc, ep); + bdc_notify_xfr(bdc, ep->ep_num); + + return 0; +} + +/* callback to gadget layer when xfr completes */ +static void bdc_req_complete(struct bdc_ep *ep, struct bdc_req *req, + int status) +{ + struct bdc *bdc = ep->bdc; + + if (req == NULL) + return; + + dev_dbg(bdc->dev, "%s ep:%s status:%d\n", __func__, ep->name, status); + list_del(&req->queue); + req->usb_req.status = status; + usb_gadget_unmap_request(&bdc->gadget, &req->usb_req, ep->dir); + if (req->usb_req.complete) { + spin_unlock(&bdc->lock); + usb_gadget_giveback_request(&ep->usb_ep, &req->usb_req); + spin_lock(&bdc->lock); + } +} + +/* Disable the endpoint */ +int bdc_ep_disable(struct bdc_ep *ep) +{ + struct bdc_req *req; + struct bdc *bdc; + int ret; + + ret = 0; + bdc = ep->bdc; + dev_dbg(bdc->dev, "%s() ep->ep_num=%d\n", __func__, ep->ep_num); + /* Stop the endpoint */ + ret = bdc_stop_ep(bdc, ep->ep_num); + + /* + * Intentionally don't check the ret value of stop, it can fail in + * disconnect scenarios, continue with dconfig + */ + /* de-queue any pending requests */ + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct bdc_req, + queue); + bdc_req_complete(ep, req, -ESHUTDOWN); + } + /* deconfigure the endpoint */ + ret = bdc_dconfig_ep(bdc, ep); + if (ret) + dev_warn(bdc->dev, + "dconfig fail but continue with memory free"); + + ep->flags = 0; + /* ep0 memory is not freed, but reused on next connect sr */ + if (ep->ep_num == 1) + return 0; + + /* Free the bdl memory */ + ep_bd_list_free(ep, ep->bd_list.num_tabs); + ep->desc = NULL; + ep->comp_desc = NULL; + ep->usb_ep.desc = NULL; + ep->ep_type = 0; + + return ret; +} + +/* Enable the ep */ +int bdc_ep_enable(struct bdc_ep *ep) +{ + struct bdc *bdc; + int ret = 0; + + bdc = ep->bdc; + dev_dbg(bdc->dev, "%s NUM_TABLES:%d %d\n", + __func__, NUM_TABLES, NUM_TABLES_ISOCH); + + ret = ep_bd_list_alloc(ep); + if (ret) { + dev_err(bdc->dev, "ep bd list allocation failed:%d\n", ret); + return -ENOMEM; + } + bdc_dbg_bd_list(bdc, ep); + /* only for ep0: config ep is called for ep0 from connect event */ + if (ep->ep_num == 1) + return ret; + + /* Issue a configure endpoint command */ + ret = bdc_config_ep(bdc, ep); + if (ret) + return ret; + + ep->usb_ep.maxpacket = usb_endpoint_maxp(ep->desc); + ep->usb_ep.desc = ep->desc; + ep->usb_ep.comp_desc = ep->comp_desc; + ep->ep_type = usb_endpoint_type(ep->desc); + ep->flags |= BDC_EP_ENABLED; + + return 0; +} + +/* EP0 related code */ + +/* Queue a status stage BD */ +static int ep0_queue_status_stage(struct bdc *bdc) +{ + struct bdc_req *status_req; + struct bdc_ep *ep; + + status_req = &bdc->status_req; + ep = bdc->bdc_ep_array[1]; + status_req->ep = ep; + status_req->usb_req.length = 0; + status_req->usb_req.status = -EINPROGRESS; + status_req->usb_req.actual = 0; + status_req->usb_req.complete = NULL; + bdc_queue_xfr(bdc, status_req); + + return 0; +} + +/* Queue xfr on ep0 */ +static int ep0_queue(struct bdc_ep *ep, struct bdc_req *req) +{ + struct bdc *bdc; + int ret; + + bdc = ep->bdc; + dev_dbg(bdc->dev, "%s()\n", __func__); + req->usb_req.actual = 0; + req->usb_req.status = -EINPROGRESS; + req->epnum = ep->ep_num; + + if (bdc->delayed_status) { + bdc->delayed_status = false; + /* if status stage was delayed? */ + if (bdc->ep0_state == WAIT_FOR_STATUS_START) { + /* Queue a status stage BD */ + ep0_queue_status_stage(bdc); + bdc->ep0_state = WAIT_FOR_STATUS_XMIT; + return 0; + } + } else { + /* + * if delayed status is false and 0 length transfer is requested + * i.e. for status stage of some setup request, then just + * return from here the status stage is queued independently + */ + if (req->usb_req.length == 0) + return 0; + + } + ret = usb_gadget_map_request(&bdc->gadget, &req->usb_req, ep->dir); + if (ret) { + dev_err(bdc->dev, "dma mapping failed %s\n", ep->name); + return ret; + } + + return bdc_queue_xfr(bdc, req); +} + +/* Queue data stage */ +static int ep0_queue_data_stage(struct bdc *bdc) +{ + struct bdc_ep *ep; + + dev_dbg(bdc->dev, "%s\n", __func__); + ep = bdc->bdc_ep_array[1]; + bdc->ep0_req.ep = ep; + bdc->ep0_req.usb_req.complete = NULL; + + return ep0_queue(ep, &bdc->ep0_req); +} + +/* Queue req on ep */ +static int ep_queue(struct bdc_ep *ep, struct bdc_req *req) +{ + struct bdc *bdc; + int ret = 0; + + if (!req || !ep->usb_ep.desc) + return -EINVAL; + + bdc = ep->bdc; + + req->usb_req.actual = 0; + req->usb_req.status = -EINPROGRESS; + req->epnum = ep->ep_num; + + ret = usb_gadget_map_request(&bdc->gadget, &req->usb_req, ep->dir); + if (ret) { + dev_err(bdc->dev, "dma mapping failed\n"); + return ret; + } + + return bdc_queue_xfr(bdc, req); +} + +/* Dequeue a request from ep */ +static int ep_dequeue(struct bdc_ep *ep, struct bdc_req *req) +{ + int start_bdi, end_bdi, tbi, eqp_bdi, curr_hw_dqpi; + bool start_pending, end_pending; + bool first_remove = false; + struct bdc_req *first_req; + struct bdc_bd *bd_start; + struct bd_table *table; + dma_addr_t next_bd_dma; + u64 deq_ptr_64 = 0; + struct bdc *bdc; + u32 tmp_32; + int ret; + + bdc = ep->bdc; + start_pending = end_pending = false; + eqp_bdi = ep->bd_list.eqp_bdi - 1; + + if (eqp_bdi < 0) + eqp_bdi = ep->bd_list.max_bdi; + + start_bdi = req->bd_xfr.start_bdi; + end_bdi = find_end_bdi(ep, req->bd_xfr.next_hwd_bdi); + + dev_dbg(bdc->dev, "%s ep:%s start:%d end:%d\n", + __func__, ep->name, start_bdi, end_bdi); + dev_dbg(bdc->dev, "%s ep=%p ep->desc=%p\n", __func__, + ep, (void *)ep->usb_ep.desc); + /* if still connected, stop the ep to see where the HW is ? */ + if (!(bdc_readl(bdc->regs, BDC_USPC) & BDC_PST_MASK)) { + ret = bdc_stop_ep(bdc, ep->ep_num); + /* if there is an issue, then no need to go further */ + if (ret) + return 0; + } else + return 0; + + /* + * After endpoint is stopped, there can be 3 cases, the request + * is processed, pending or in the middle of processing + */ + + /* The current hw dequeue pointer */ + tmp_32 = bdc_readl(bdc->regs, BDC_EPSTS0); + deq_ptr_64 = tmp_32; + tmp_32 = bdc_readl(bdc->regs, BDC_EPSTS1); + deq_ptr_64 |= ((u64)tmp_32 << 32); + + /* we have the dma addr of next bd that will be fetched by hardware */ + curr_hw_dqpi = bd_add_to_bdi(ep, deq_ptr_64); + if (curr_hw_dqpi < 0) + return curr_hw_dqpi; + + /* + * curr_hw_dqpi points to actual dqp of HW and HW owns bd's from + * curr_hw_dqbdi..eqp_bdi. + */ + + /* Check if start_bdi and end_bdi are in range of HW owned BD's */ + if (curr_hw_dqpi > eqp_bdi) { + /* there is a wrap from last to 0 */ + if (start_bdi >= curr_hw_dqpi || start_bdi <= eqp_bdi) { + start_pending = true; + end_pending = true; + } else if (end_bdi >= curr_hw_dqpi || end_bdi <= eqp_bdi) { + end_pending = true; + } + } else { + if (start_bdi >= curr_hw_dqpi) { + start_pending = true; + end_pending = true; + } else if (end_bdi >= curr_hw_dqpi) { + end_pending = true; + } + } + dev_dbg(bdc->dev, + "start_pending:%d end_pending:%d speed:%d\n", + start_pending, end_pending, bdc->gadget.speed); + + /* If both start till end are processes, we cannot deq req */ + if (!start_pending && !end_pending) + return -EINVAL; + + /* + * if ep_dequeue is called after disconnect then just return + * success from here + */ + if (bdc->gadget.speed == USB_SPEED_UNKNOWN) + return 0; + tbi = bdi_to_tbi(ep, req->bd_xfr.next_hwd_bdi); + table = ep->bd_list.bd_table_array[tbi]; + next_bd_dma = table->dma + + sizeof(struct bdc_bd)*(req->bd_xfr.next_hwd_bdi - + tbi * ep->bd_list.num_bds_table); + + first_req = list_first_entry(&ep->queue, struct bdc_req, + queue); + + if (req == first_req) + first_remove = true; + + /* + * Due to HW limitation we need to bypadd chain bd's and issue ep_bla, + * incase if start is pending this is the first request in the list + * then issue ep_bla instead of marking as chain bd + */ + if (start_pending && !first_remove) { + /* + * Mark the start bd as Chain bd, and point the chain + * bd to next_bd_dma + */ + bd_start = bdi_to_bd(ep, start_bdi); + bd_start->offset[0] = cpu_to_le32(lower_32_bits(next_bd_dma)); + bd_start->offset[1] = cpu_to_le32(upper_32_bits(next_bd_dma)); + bd_start->offset[2] = 0x0; + bd_start->offset[3] = cpu_to_le32(MARK_CHAIN_BD); + bdc_dbg_bd_list(bdc, ep); + } else if (end_pending) { + /* + * The transfer is stopped in the middle, move the + * HW deq pointer to next_bd_dma + */ + ret = bdc_ep_bla(bdc, ep, next_bd_dma); + if (ret) { + dev_err(bdc->dev, "error in ep_bla:%d\n", ret); + return ret; + } + } + + return 0; +} + +/* Halt/Clear the ep based on value */ +static int ep_set_halt(struct bdc_ep *ep, u32 value) +{ + struct bdc *bdc; + int ret; + + bdc = ep->bdc; + dev_dbg(bdc->dev, "%s ep:%s value=%d\n", __func__, ep->name, value); + + if (value) { + dev_dbg(bdc->dev, "Halt\n"); + if (ep->ep_num == 1) + bdc->ep0_state = WAIT_FOR_SETUP; + + ret = bdc_ep_set_stall(bdc, ep->ep_num); + if (ret) + dev_err(bdc->dev, "failed to set STALL on %s\n", + ep->name); + else + ep->flags |= BDC_EP_STALL; + } else { + /* Clear */ + dev_dbg(bdc->dev, "Before Clear\n"); + ret = bdc_ep_clear_stall(bdc, ep->ep_num); + if (ret) + dev_err(bdc->dev, "failed to clear STALL on %s\n", + ep->name); + else + ep->flags &= ~BDC_EP_STALL; + dev_dbg(bdc->dev, "After Clear\n"); + } + + return ret; +} + +/* Free all the ep */ +void bdc_free_ep(struct bdc *bdc) +{ + struct bdc_ep *ep; + u8 epnum; + + dev_dbg(bdc->dev, "%s\n", __func__); + for (epnum = 1; epnum < bdc->num_eps; epnum++) { + ep = bdc->bdc_ep_array[epnum]; + if (!ep) + continue; + + if (ep->flags & BDC_EP_ENABLED) + ep_bd_list_free(ep, ep->bd_list.num_tabs); + + /* ep0 is not in this gadget list */ + if (epnum != 1) + list_del(&ep->usb_ep.ep_list); + + kfree(ep); + } +} + +/* USB2 spec, section 7.1.20 */ +static int bdc_set_test_mode(struct bdc *bdc) +{ + u32 usb2_pm; + + usb2_pm = bdc_readl(bdc->regs, BDC_USPPM2); + usb2_pm &= ~BDC_PTC_MASK; + dev_dbg(bdc->dev, "%s\n", __func__); + switch (bdc->test_mode) { + case USB_TEST_J: + case USB_TEST_K: + case USB_TEST_SE0_NAK: + case USB_TEST_PACKET: + case USB_TEST_FORCE_ENABLE: + usb2_pm |= bdc->test_mode << 28; + break; + default: + return -EINVAL; + } + dev_dbg(bdc->dev, "usb2_pm=%08x", usb2_pm); + bdc_writel(bdc->regs, BDC_USPPM2, usb2_pm); + + return 0; +} + +/* + * Helper function to handle Transfer status report with status as either + * success or short + */ +static void handle_xsr_succ_status(struct bdc *bdc, struct bdc_ep *ep, + struct bdc_sr *sreport) +{ + int short_bdi, start_bdi, end_bdi, max_len_bds, chain_bds; + struct bd_list *bd_list = &ep->bd_list; + int actual_length, length_short; + struct bd_transfer *bd_xfr; + struct bdc_bd *short_bd; + struct bdc_req *req; + u64 deq_ptr_64 = 0; + int status = 0; + int sr_status; + u32 tmp_32; + + dev_dbg(bdc->dev, "%s ep:%p\n", __func__, ep); + bdc_dbg_srr(bdc, 0); + /* do not process thie sr if ignore flag is set */ + if (ep->ignore_next_sr) { + ep->ignore_next_sr = false; + return; + } + + if (unlikely(list_empty(&ep->queue))) { + dev_warn(bdc->dev, "xfr srr with no BD's queued\n"); + return; + } + req = list_entry(ep->queue.next, struct bdc_req, + queue); + + bd_xfr = &req->bd_xfr; + sr_status = XSF_STS(le32_to_cpu(sreport->offset[3])); + + /* + * sr_status is short and this transfer has more than 1 bd then it needs + * special handling, this is only applicable for bulk and ctrl + */ + if (sr_status == XSF_SHORT && bd_xfr->num_bds > 1) { + /* + * This is multi bd xfr, lets see which bd + * caused short transfer and how many bytes have been + * transferred so far. + */ + tmp_32 = le32_to_cpu(sreport->offset[0]); + deq_ptr_64 = tmp_32; + tmp_32 = le32_to_cpu(sreport->offset[1]); + deq_ptr_64 |= ((u64)tmp_32 << 32); + short_bdi = bd_add_to_bdi(ep, deq_ptr_64); + if (unlikely(short_bdi < 0)) + dev_warn(bdc->dev, "bd doesn't exist?\n"); + + start_bdi = bd_xfr->start_bdi; + /* + * We know the start_bdi and short_bdi, how many xfr + * bds in between + */ + if (start_bdi <= short_bdi) { + max_len_bds = short_bdi - start_bdi; + if (max_len_bds <= bd_list->num_bds_table) { + if (!(bdi_to_tbi(ep, start_bdi) == + bdi_to_tbi(ep, short_bdi))) + max_len_bds--; + } else { + chain_bds = max_len_bds/bd_list->num_bds_table; + max_len_bds -= chain_bds; + } + } else { + /* there is a wrap in the ring within a xfr */ + chain_bds = (bd_list->max_bdi - start_bdi)/ + bd_list->num_bds_table; + chain_bds += short_bdi/bd_list->num_bds_table; + max_len_bds = bd_list->max_bdi - start_bdi; + max_len_bds += short_bdi; + max_len_bds -= chain_bds; + } + /* max_len_bds is the number of full length bds */ + end_bdi = find_end_bdi(ep, bd_xfr->next_hwd_bdi); + if (!(end_bdi == short_bdi)) + ep->ignore_next_sr = true; + + actual_length = max_len_bds * BD_MAX_BUFF_SIZE; + short_bd = bdi_to_bd(ep, short_bdi); + /* length queued */ + length_short = le32_to_cpu(short_bd->offset[2]) & 0x1FFFFF; + /* actual length trensfered */ + length_short -= SR_BD_LEN(le32_to_cpu(sreport->offset[2])); + actual_length += length_short; + req->usb_req.actual = actual_length; + } else { + req->usb_req.actual = req->usb_req.length - + SR_BD_LEN(le32_to_cpu(sreport->offset[2])); + dev_dbg(bdc->dev, + "len=%d actual=%d bd_xfr->next_hwd_bdi:%d\n", + req->usb_req.length, req->usb_req.actual, + bd_xfr->next_hwd_bdi); + } + + /* Update the dequeue pointer */ + ep->bd_list.hwd_bdi = bd_xfr->next_hwd_bdi; + if (req->usb_req.actual < req->usb_req.length) { + dev_dbg(bdc->dev, "short xfr on %d\n", ep->ep_num); + if (req->usb_req.short_not_ok) + status = -EREMOTEIO; + } + bdc_req_complete(ep, bd_xfr->req, status); +} + +/* EP0 setup related packet handlers */ + +/* + * Setup packet received, just store the packet and process on next DS or SS + * started SR + */ +void bdc_xsf_ep0_setup_recv(struct bdc *bdc, struct bdc_sr *sreport) +{ + struct usb_ctrlrequest *setup_pkt; + u32 len; + + dev_dbg(bdc->dev, + "%s ep0_state:%s\n", + __func__, ep0_state_string[bdc->ep0_state]); + /* Store received setup packet */ + setup_pkt = &bdc->setup_pkt; + memcpy(setup_pkt, &sreport->offset[0], sizeof(*setup_pkt)); + len = le16_to_cpu(setup_pkt->wLength); + if (!len) + bdc->ep0_state = WAIT_FOR_STATUS_START; + else + bdc->ep0_state = WAIT_FOR_DATA_START; + + + dev_dbg(bdc->dev, + "%s exit ep0_state:%s\n", + __func__, ep0_state_string[bdc->ep0_state]); +} + +/* Stall ep0 */ +static void ep0_stall(struct bdc *bdc) +{ + struct bdc_ep *ep = bdc->bdc_ep_array[1]; + struct bdc_req *req; + + dev_dbg(bdc->dev, "%s\n", __func__); + bdc->delayed_status = false; + ep_set_halt(ep, 1); + + /* de-queue any pendig requests */ + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct bdc_req, + queue); + bdc_req_complete(ep, req, -ESHUTDOWN); + } +} + +/* SET_ADD handlers */ +static int ep0_set_address(struct bdc *bdc, struct usb_ctrlrequest *ctrl) +{ + enum usb_device_state state = bdc->gadget.state; + int ret = 0; + u32 addr; + + addr = le16_to_cpu(ctrl->wValue); + dev_dbg(bdc->dev, + "%s addr:%d dev state:%d\n", + __func__, addr, state); + + if (addr > 127) + return -EINVAL; + + switch (state) { + case USB_STATE_DEFAULT: + case USB_STATE_ADDRESS: + /* Issue Address device command */ + ret = bdc_address_device(bdc, addr); + if (ret) + return ret; + + if (addr) + usb_gadget_set_state(&bdc->gadget, USB_STATE_ADDRESS); + else + usb_gadget_set_state(&bdc->gadget, USB_STATE_DEFAULT); + + bdc->dev_addr = addr; + break; + default: + dev_warn(bdc->dev, + "SET Address in wrong device state %d\n", + state); + ret = -EINVAL; + } + + return ret; +} + +/* Handler for SET/CLEAR FEATURE requests for device */ +static int ep0_handle_feature_dev(struct bdc *bdc, u16 wValue, + u16 wIndex, bool set) +{ + enum usb_device_state state = bdc->gadget.state; + u32 usppms = 0; + + dev_dbg(bdc->dev, "%s set:%d dev state:%d\n", + __func__, set, state); + switch (wValue) { + case USB_DEVICE_REMOTE_WAKEUP: + dev_dbg(bdc->dev, "USB_DEVICE_REMOTE_WAKEUP\n"); + if (set) + bdc->devstatus |= REMOTE_WAKE_ENABLE; + else + bdc->devstatus &= ~REMOTE_WAKE_ENABLE; + break; + + case USB_DEVICE_TEST_MODE: + dev_dbg(bdc->dev, "USB_DEVICE_TEST_MODE\n"); + if ((wIndex & 0xFF) || + (bdc->gadget.speed != USB_SPEED_HIGH) || !set) + return -EINVAL; + + bdc->test_mode = wIndex >> 8; + break; + + case USB_DEVICE_U1_ENABLE: + dev_dbg(bdc->dev, "USB_DEVICE_U1_ENABLE\n"); + + if (bdc->gadget.speed != USB_SPEED_SUPER || + state != USB_STATE_CONFIGURED) + return -EINVAL; + + usppms = bdc_readl(bdc->regs, BDC_USPPMS); + if (set) { + /* clear previous u1t */ + usppms &= ~BDC_U1T(BDC_U1T_MASK); + usppms |= BDC_U1T(U1_TIMEOUT); + usppms |= BDC_U1E | BDC_PORT_W1S; + bdc->devstatus |= (1 << USB_DEV_STAT_U1_ENABLED); + } else { + usppms &= ~BDC_U1E; + usppms |= BDC_PORT_W1S; + bdc->devstatus &= ~(1 << USB_DEV_STAT_U1_ENABLED); + } + bdc_writel(bdc->regs, BDC_USPPMS, usppms); + break; + + case USB_DEVICE_U2_ENABLE: + dev_dbg(bdc->dev, "USB_DEVICE_U2_ENABLE\n"); + + if (bdc->gadget.speed != USB_SPEED_SUPER || + state != USB_STATE_CONFIGURED) + return -EINVAL; + + usppms = bdc_readl(bdc->regs, BDC_USPPMS); + if (set) { + usppms |= BDC_U2E; + usppms |= BDC_U2A; + bdc->devstatus |= (1 << USB_DEV_STAT_U2_ENABLED); + } else { + usppms &= ~BDC_U2E; + usppms &= ~BDC_U2A; + bdc->devstatus &= ~(1 << USB_DEV_STAT_U2_ENABLED); + } + bdc_writel(bdc->regs, BDC_USPPMS, usppms); + break; + + case USB_DEVICE_LTM_ENABLE: + dev_dbg(bdc->dev, "USB_DEVICE_LTM_ENABLE?\n"); + if (bdc->gadget.speed != USB_SPEED_SUPER || + state != USB_STATE_CONFIGURED) + return -EINVAL; + break; + default: + dev_err(bdc->dev, "Unknown wValue:%d\n", wValue); + return -EOPNOTSUPP; + } /* USB_RECIP_DEVICE end */ + + return 0; +} + +/* SET/CLEAR FEATURE handler */ +static int ep0_handle_feature(struct bdc *bdc, + struct usb_ctrlrequest *setup_pkt, bool set) +{ + enum usb_device_state state = bdc->gadget.state; + struct bdc_ep *ep; + u16 wValue; + u16 wIndex; + int epnum; + + wValue = le16_to_cpu(setup_pkt->wValue); + wIndex = le16_to_cpu(setup_pkt->wIndex); + + dev_dbg(bdc->dev, + "%s wValue=%d wIndex=%d devstate=%08x speed=%d set=%d", + __func__, wValue, wIndex, state, + bdc->gadget.speed, set); + + switch (setup_pkt->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + return ep0_handle_feature_dev(bdc, wValue, wIndex, set); + case USB_RECIP_INTERFACE: + dev_dbg(bdc->dev, "USB_RECIP_INTERFACE\n"); + /* USB3 spec, sec 9.4.9 */ + if (wValue != USB_INTRF_FUNC_SUSPEND) + return -EINVAL; + /* USB3 spec, Table 9-8 */ + if (set) { + if (wIndex & USB_INTRF_FUNC_SUSPEND_RW) { + dev_dbg(bdc->dev, "SET REMOTE_WAKEUP\n"); + bdc->devstatus |= REMOTE_WAKE_ENABLE; + } else { + dev_dbg(bdc->dev, "CLEAR REMOTE_WAKEUP\n"); + bdc->devstatus &= ~REMOTE_WAKE_ENABLE; + } + } + break; + + case USB_RECIP_ENDPOINT: + dev_dbg(bdc->dev, "USB_RECIP_ENDPOINT\n"); + if (wValue != USB_ENDPOINT_HALT) + return -EINVAL; + + epnum = wIndex & USB_ENDPOINT_NUMBER_MASK; + if (epnum) { + if ((wIndex & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) + epnum = epnum * 2 + 1; + else + epnum *= 2; + } else { + epnum = 1; /*EP0*/ + } + /* + * If CLEAR_FEATURE on ep0 then don't do anything as the stall + * condition on ep0 has already been cleared when SETUP packet + * was received. + */ + if (epnum == 1 && !set) { + dev_dbg(bdc->dev, "ep0 stall already cleared\n"); + return 0; + } + dev_dbg(bdc->dev, "epnum=%d\n", epnum); + ep = bdc->bdc_ep_array[epnum]; + if (!ep) + return -EINVAL; + + return ep_set_halt(ep, set); + default: + dev_err(bdc->dev, "Unknown recipient\n"); + return -EINVAL; + } + + return 0; +} + +/* GET_STATUS request handler */ +static int ep0_handle_status(struct bdc *bdc, + struct usb_ctrlrequest *setup_pkt) +{ + enum usb_device_state state = bdc->gadget.state; + struct bdc_ep *ep; + u16 usb_status = 0; + u32 epnum; + u16 wIndex; + + /* USB2.0 spec sec 9.4.5 */ + if (state == USB_STATE_DEFAULT) + return -EINVAL; + wIndex = le16_to_cpu(setup_pkt->wIndex); + dev_dbg(bdc->dev, "%s\n", __func__); + usb_status = bdc->devstatus; + switch (setup_pkt->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + dev_dbg(bdc->dev, + "USB_RECIP_DEVICE devstatus:%08x\n", + bdc->devstatus); + /* USB3 spec, sec 9.4.5 */ + if (bdc->gadget.speed == USB_SPEED_SUPER) + usb_status &= ~REMOTE_WAKE_ENABLE; + break; + + case USB_RECIP_INTERFACE: + dev_dbg(bdc->dev, "USB_RECIP_INTERFACE\n"); + if (bdc->gadget.speed == USB_SPEED_SUPER) { + /* + * This should come from func for Func remote wkup + * usb_status |=1; + */ + if (bdc->devstatus & REMOTE_WAKE_ENABLE) + usb_status |= REMOTE_WAKE_ENABLE; + } else { + usb_status = 0; + } + + break; + + case USB_RECIP_ENDPOINT: + dev_dbg(bdc->dev, "USB_RECIP_ENDPOINT\n"); + epnum = wIndex & USB_ENDPOINT_NUMBER_MASK; + if (epnum) { + if ((wIndex & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) + epnum = epnum*2 + 1; + else + epnum *= 2; + } else { + epnum = 1; /* EP0 */ + } + + ep = bdc->bdc_ep_array[epnum]; + if (!ep) { + dev_err(bdc->dev, "ISSUE, GET_STATUS for invalid EP ?"); + return -EINVAL; + } + if (ep->flags & BDC_EP_STALL) + usb_status |= 1 << USB_ENDPOINT_HALT; + + break; + default: + dev_err(bdc->dev, "Unknown recipient for get_status\n"); + return -EINVAL; + } + /* prepare a data stage for GET_STATUS */ + dev_dbg(bdc->dev, "usb_status=%08x\n", usb_status); + *(__le16 *)bdc->ep0_response_buff = cpu_to_le16(usb_status); + bdc->ep0_req.usb_req.length = 2; + bdc->ep0_req.usb_req.buf = &bdc->ep0_response_buff; + ep0_queue_data_stage(bdc); + + return 0; +} + +static void ep0_set_sel_cmpl(struct usb_ep *_ep, struct usb_request *_req) +{ + /* ep0_set_sel_cmpl */ +} + +/* Queue data stage to handle 6 byte SET_SEL request */ +static int ep0_set_sel(struct bdc *bdc, + struct usb_ctrlrequest *setup_pkt) +{ + struct bdc_ep *ep; + u16 wLength; + + dev_dbg(bdc->dev, "%s\n", __func__); + wLength = le16_to_cpu(setup_pkt->wLength); + if (unlikely(wLength != 6)) { + dev_err(bdc->dev, "%s Wrong wLength:%d\n", __func__, wLength); + return -EINVAL; + } + ep = bdc->bdc_ep_array[1]; + bdc->ep0_req.ep = ep; + bdc->ep0_req.usb_req.length = 6; + bdc->ep0_req.usb_req.buf = bdc->ep0_response_buff; + bdc->ep0_req.usb_req.complete = ep0_set_sel_cmpl; + ep0_queue_data_stage(bdc); + + return 0; +} + +/* + * Queue a 0 byte bd only if wLength is more than the length and length is + * a multiple of MaxPacket then queue 0 byte BD + */ +static int ep0_queue_zlp(struct bdc *bdc) +{ + int ret; + + dev_dbg(bdc->dev, "%s\n", __func__); + bdc->ep0_req.ep = bdc->bdc_ep_array[1]; + bdc->ep0_req.usb_req.length = 0; + bdc->ep0_req.usb_req.complete = NULL; + bdc->ep0_state = WAIT_FOR_DATA_START; + ret = bdc_queue_xfr(bdc, &bdc->ep0_req); + if (ret) { + dev_err(bdc->dev, "err queueing zlp :%d\n", ret); + return ret; + } + bdc->ep0_state = WAIT_FOR_DATA_XMIT; + + return 0; +} + +/* Control request handler */ +static int handle_control_request(struct bdc *bdc) +{ + enum usb_device_state state = bdc->gadget.state; + struct usb_ctrlrequest *setup_pkt; + int delegate_setup = 0; + int ret = 0; + int config = 0; + + setup_pkt = &bdc->setup_pkt; + dev_dbg(bdc->dev, "%s\n", __func__); + if ((setup_pkt->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { + switch (setup_pkt->bRequest) { + case USB_REQ_SET_ADDRESS: + dev_dbg(bdc->dev, "USB_REQ_SET_ADDRESS\n"); + ret = ep0_set_address(bdc, setup_pkt); + bdc->devstatus &= DEVSTATUS_CLEAR; + break; + + case USB_REQ_SET_CONFIGURATION: + dev_dbg(bdc->dev, "USB_REQ_SET_CONFIGURATION\n"); + if (state == USB_STATE_ADDRESS) { + usb_gadget_set_state(&bdc->gadget, + USB_STATE_CONFIGURED); + } else if (state == USB_STATE_CONFIGURED) { + /* + * USB2 spec sec 9.4.7, if wValue is 0 then dev + * is moved to addressed state + */ + config = le16_to_cpu(setup_pkt->wValue); + if (!config) + usb_gadget_set_state( + &bdc->gadget, + USB_STATE_ADDRESS); + } + delegate_setup = 1; + break; + + case USB_REQ_SET_FEATURE: + dev_dbg(bdc->dev, "USB_REQ_SET_FEATURE\n"); + ret = ep0_handle_feature(bdc, setup_pkt, 1); + break; + + case USB_REQ_CLEAR_FEATURE: + dev_dbg(bdc->dev, "USB_REQ_CLEAR_FEATURE\n"); + ret = ep0_handle_feature(bdc, setup_pkt, 0); + break; + + case USB_REQ_GET_STATUS: + dev_dbg(bdc->dev, "USB_REQ_GET_STATUS\n"); + ret = ep0_handle_status(bdc, setup_pkt); + break; + + case USB_REQ_SET_SEL: + dev_dbg(bdc->dev, "USB_REQ_SET_SEL\n"); + ret = ep0_set_sel(bdc, setup_pkt); + break; + + case USB_REQ_SET_ISOCH_DELAY: + dev_warn(bdc->dev, + "USB_REQ_SET_ISOCH_DELAY not handled\n"); + ret = 0; + break; + default: + delegate_setup = 1; + } + } else { + delegate_setup = 1; + } + + if (delegate_setup) { + spin_unlock(&bdc->lock); + ret = bdc->gadget_driver->setup(&bdc->gadget, setup_pkt); + spin_lock(&bdc->lock); + } + + return ret; +} + +/* EP0: Data stage started */ +void bdc_xsf_ep0_data_start(struct bdc *bdc, struct bdc_sr *sreport) +{ + struct bdc_ep *ep; + int ret = 0; + + dev_dbg(bdc->dev, "%s\n", __func__); + ep = bdc->bdc_ep_array[1]; + /* If ep0 was stalled, the clear it first */ + if (ep->flags & BDC_EP_STALL) { + ret = ep_set_halt(ep, 0); + if (ret) + goto err; + } + if (bdc->ep0_state != WAIT_FOR_DATA_START) + dev_warn(bdc->dev, + "Data stage not expected ep0_state:%s\n", + ep0_state_string[bdc->ep0_state]); + + ret = handle_control_request(bdc); + if (ret == USB_GADGET_DELAYED_STATUS) { + /* + * The ep0 state will remain WAIT_FOR_DATA_START till + * we received ep_queue on ep0 + */ + bdc->delayed_status = true; + return; + } + if (!ret) { + bdc->ep0_state = WAIT_FOR_DATA_XMIT; + dev_dbg(bdc->dev, + "ep0_state:%s", ep0_state_string[bdc->ep0_state]); + return; + } +err: + ep0_stall(bdc); +} + +/* EP0: status stage started */ +void bdc_xsf_ep0_status_start(struct bdc *bdc, struct bdc_sr *sreport) +{ + struct usb_ctrlrequest *setup_pkt; + struct bdc_ep *ep; + int ret = 0; + + dev_dbg(bdc->dev, + "%s ep0_state:%s", + __func__, ep0_state_string[bdc->ep0_state]); + ep = bdc->bdc_ep_array[1]; + + /* check if ZLP was queued? */ + if (bdc->zlp_needed) + bdc->zlp_needed = false; + + if (ep->flags & BDC_EP_STALL) { + ret = ep_set_halt(ep, 0); + if (ret) + goto err; + } + + if ((bdc->ep0_state != WAIT_FOR_STATUS_START) && + (bdc->ep0_state != WAIT_FOR_DATA_XMIT)) + dev_err(bdc->dev, + "Status stage recv but ep0_state:%s\n", + ep0_state_string[bdc->ep0_state]); + + /* check if data stage is in progress ? */ + if (bdc->ep0_state == WAIT_FOR_DATA_XMIT) { + bdc->ep0_state = STATUS_PENDING; + /* Status stage will be queued upon Data stage transmit event */ + dev_dbg(bdc->dev, + "status started but data not transmitted yet\n"); + return; + } + setup_pkt = &bdc->setup_pkt; + + /* + * 2 stage setup then only process the setup, for 3 stage setup the date + * stage is already handled + */ + if (!le16_to_cpu(setup_pkt->wLength)) { + ret = handle_control_request(bdc); + if (ret == USB_GADGET_DELAYED_STATUS) { + bdc->delayed_status = true; + /* ep0_state will remain WAIT_FOR_STATUS_START */ + return; + } + } + if (!ret) { + /* Queue a status stage BD */ + ep0_queue_status_stage(bdc); + bdc->ep0_state = WAIT_FOR_STATUS_XMIT; + dev_dbg(bdc->dev, + "ep0_state:%s", ep0_state_string[bdc->ep0_state]); + return; + } +err: + ep0_stall(bdc); +} + +/* Helper function to update ep0 upon SR with xsf_succ or xsf_short */ +static void ep0_xsf_complete(struct bdc *bdc, struct bdc_sr *sreport) +{ + dev_dbg(bdc->dev, "%s\n", __func__); + switch (bdc->ep0_state) { + case WAIT_FOR_DATA_XMIT: + bdc->ep0_state = WAIT_FOR_STATUS_START; + break; + case WAIT_FOR_STATUS_XMIT: + bdc->ep0_state = WAIT_FOR_SETUP; + if (bdc->test_mode) { + int ret; + + dev_dbg(bdc->dev, "test_mode:%d\n", bdc->test_mode); + ret = bdc_set_test_mode(bdc); + if (ret < 0) { + dev_err(bdc->dev, "Err in setting Test mode\n"); + return; + } + bdc->test_mode = 0; + } + break; + case STATUS_PENDING: + bdc_xsf_ep0_status_start(bdc, sreport); + break; + + default: + dev_err(bdc->dev, + "Unknown ep0_state:%s\n", + ep0_state_string[bdc->ep0_state]); + + } +} + +/* xfr completion status report handler */ +void bdc_sr_xsf(struct bdc *bdc, struct bdc_sr *sreport) +{ + struct bdc_ep *ep; + u32 sr_status; + u8 ep_num; + + ep_num = (le32_to_cpu(sreport->offset[3])>>4) & 0x1f; + ep = bdc->bdc_ep_array[ep_num]; + if (!ep || !(ep->flags & BDC_EP_ENABLED)) { + dev_err(bdc->dev, "xsf for ep not enabled\n"); + return; + } + /* + * check if this transfer is after link went from U3->U0 due + * to remote wakeup + */ + if (bdc->devstatus & FUNC_WAKE_ISSUED) { + bdc->devstatus &= ~(FUNC_WAKE_ISSUED); + dev_dbg(bdc->dev, "%s clearing FUNC_WAKE_ISSUED flag\n", + __func__); + } + sr_status = XSF_STS(le32_to_cpu(sreport->offset[3])); + dev_dbg_ratelimited(bdc->dev, "%s sr_status=%d ep:%s\n", + __func__, sr_status, ep->name); + + switch (sr_status) { + case XSF_SUCC: + case XSF_SHORT: + handle_xsr_succ_status(bdc, ep, sreport); + if (ep_num == 1) + ep0_xsf_complete(bdc, sreport); + break; + + case XSF_SETUP_RECV: + case XSF_DATA_START: + case XSF_STATUS_START: + if (ep_num != 1) { + dev_err(bdc->dev, + "ep0 related packets on non ep0 endpoint"); + return; + } + bdc->sr_xsf_ep0[sr_status - XSF_SETUP_RECV](bdc, sreport); + break; + + case XSF_BABB: + if (ep_num == 1) { + dev_dbg(bdc->dev, "Babble on ep0 zlp_need:%d\n", + bdc->zlp_needed); + /* + * If the last completed transfer had wLength >Data Len, + * and Len is multiple of MaxPacket,then queue ZLP + */ + if (bdc->zlp_needed) { + /* queue 0 length bd */ + ep0_queue_zlp(bdc); + return; + } + } + dev_warn(bdc->dev, "Babble on ep not handled\n"); + break; + default: + dev_warn(bdc->dev, "sr status not handled:%x\n", sr_status); + break; + } +} + +static int bdc_gadget_ep_queue(struct usb_ep *_ep, + struct usb_request *_req, gfp_t gfp_flags) +{ + struct bdc_req *req; + unsigned long flags; + struct bdc_ep *ep; + struct bdc *bdc; + int ret; + + if (!_ep || !_ep->desc) + return -ESHUTDOWN; + + if (!_req || !_req->complete || !_req->buf) + return -EINVAL; + + ep = to_bdc_ep(_ep); + req = to_bdc_req(_req); + bdc = ep->bdc; + dev_dbg(bdc->dev, "%s ep:%p req:%p\n", __func__, ep, req); + dev_dbg(bdc->dev, "queuing request %p to %s length %d zero:%d\n", + _req, ep->name, _req->length, _req->zero); + + if (!ep->usb_ep.desc) { + dev_warn(bdc->dev, + "trying to queue req %p to disabled %s\n", + _req, ep->name); + return -ESHUTDOWN; + } + + if (_req->length > MAX_XFR_LEN) { + dev_warn(bdc->dev, + "req length > supported MAX:%d requested:%d\n", + MAX_XFR_LEN, _req->length); + return -EOPNOTSUPP; + } + spin_lock_irqsave(&bdc->lock, flags); + if (ep == bdc->bdc_ep_array[1]) + ret = ep0_queue(ep, req); + else + ret = ep_queue(ep, req); + + spin_unlock_irqrestore(&bdc->lock, flags); + + return ret; +} + +static int bdc_gadget_ep_dequeue(struct usb_ep *_ep, + struct usb_request *_req) +{ + struct bdc_req *req; + struct bdc_req *iter; + unsigned long flags; + struct bdc_ep *ep; + struct bdc *bdc; + int ret; + + if (!_ep || !_req) + return -EINVAL; + + ep = to_bdc_ep(_ep); + req = to_bdc_req(_req); + bdc = ep->bdc; + dev_dbg(bdc->dev, "%s ep:%s req:%p\n", __func__, ep->name, req); + bdc_dbg_bd_list(bdc, ep); + spin_lock_irqsave(&bdc->lock, flags); + + req = NULL; + /* make sure it's still queued on this endpoint */ + list_for_each_entry(iter, &ep->queue, queue) { + if (&iter->usb_req != _req) + continue; + req = iter; + break; + } + if (!req) { + spin_unlock_irqrestore(&bdc->lock, flags); + dev_err(bdc->dev, "usb_req !=req n"); + return -EINVAL; + } + ret = ep_dequeue(ep, req); + if (ret) { + ret = -EOPNOTSUPP; + goto err; + } + bdc_req_complete(ep, req, -ECONNRESET); + +err: + bdc_dbg_bd_list(bdc, ep); + spin_unlock_irqrestore(&bdc->lock, flags); + + return ret; +} + +static int bdc_gadget_ep_set_halt(struct usb_ep *_ep, int value) +{ + unsigned long flags; + struct bdc_ep *ep; + struct bdc *bdc; + int ret; + + ep = to_bdc_ep(_ep); + bdc = ep->bdc; + dev_dbg(bdc->dev, "%s ep:%s value=%d\n", __func__, ep->name, value); + spin_lock_irqsave(&bdc->lock, flags); + if (usb_endpoint_xfer_isoc(ep->usb_ep.desc)) + ret = -EINVAL; + else if (!list_empty(&ep->queue)) + ret = -EAGAIN; + else + ret = ep_set_halt(ep, value); + + spin_unlock_irqrestore(&bdc->lock, flags); + + return ret; +} + +static struct usb_request *bdc_gadget_alloc_request(struct usb_ep *_ep, + gfp_t gfp_flags) +{ + struct bdc_req *req; + struct bdc_ep *ep; + + req = kzalloc(sizeof(*req), gfp_flags); + if (!req) + return NULL; + + ep = to_bdc_ep(_ep); + req->ep = ep; + req->epnum = ep->ep_num; + req->usb_req.dma = DMA_ADDR_INVALID; + dev_dbg(ep->bdc->dev, "%s ep:%s req:%p\n", __func__, ep->name, req); + + return &req->usb_req; +} + +static void bdc_gadget_free_request(struct usb_ep *_ep, + struct usb_request *_req) +{ + struct bdc_req *req; + + req = to_bdc_req(_req); + kfree(req); +} + +/* endpoint operations */ + +/* configure endpoint and also allocate resources */ +static int bdc_gadget_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + unsigned long flags; + struct bdc_ep *ep; + struct bdc *bdc; + int ret; + + if (!_ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) { + pr_debug("%s invalid parameters\n", __func__); + return -EINVAL; + } + + if (!desc->wMaxPacketSize) { + pr_debug("%s missing wMaxPacketSize\n", __func__); + return -EINVAL; + } + + ep = to_bdc_ep(_ep); + bdc = ep->bdc; + + /* Sanity check, upper layer will not send enable for ep0 */ + if (ep == bdc->bdc_ep_array[1]) + return -EINVAL; + + if (!bdc->gadget_driver + || bdc->gadget.speed == USB_SPEED_UNKNOWN) { + return -ESHUTDOWN; + } + + dev_dbg(bdc->dev, "%s Enabling %s\n", __func__, ep->name); + spin_lock_irqsave(&bdc->lock, flags); + ep->desc = desc; + ep->comp_desc = _ep->comp_desc; + ret = bdc_ep_enable(ep); + spin_unlock_irqrestore(&bdc->lock, flags); + + return ret; +} + +static int bdc_gadget_ep_disable(struct usb_ep *_ep) +{ + unsigned long flags; + struct bdc_ep *ep; + struct bdc *bdc; + int ret; + + if (!_ep) { + pr_debug("bdc: invalid parameters\n"); + return -EINVAL; + } + ep = to_bdc_ep(_ep); + bdc = ep->bdc; + + /* Upper layer will not call this for ep0, but do a sanity check */ + if (ep == bdc->bdc_ep_array[1]) { + dev_warn(bdc->dev, "%s called for ep0\n", __func__); + return -EINVAL; + } + dev_dbg(bdc->dev, + "%s() ep:%s ep->flags:%08x\n", + __func__, ep->name, ep->flags); + + if (!(ep->flags & BDC_EP_ENABLED)) { + if (bdc->gadget.speed != USB_SPEED_UNKNOWN) + dev_warn(bdc->dev, "%s is already disabled\n", + ep->name); + return 0; + } + spin_lock_irqsave(&bdc->lock, flags); + ret = bdc_ep_disable(ep); + spin_unlock_irqrestore(&bdc->lock, flags); + + return ret; +} + +static const struct usb_ep_ops bdc_gadget_ep_ops = { + .enable = bdc_gadget_ep_enable, + .disable = bdc_gadget_ep_disable, + .alloc_request = bdc_gadget_alloc_request, + .free_request = bdc_gadget_free_request, + .queue = bdc_gadget_ep_queue, + .dequeue = bdc_gadget_ep_dequeue, + .set_halt = bdc_gadget_ep_set_halt +}; + +/* dir = 1 is IN */ +static int init_ep(struct bdc *bdc, u32 epnum, u32 dir) +{ + struct bdc_ep *ep; + + dev_dbg(bdc->dev, "%s epnum=%d dir=%d\n", __func__, epnum, dir); + ep = kzalloc(sizeof(*ep), GFP_KERNEL); + if (!ep) + return -ENOMEM; + + ep->bdc = bdc; + ep->dir = dir; + + if (dir) + ep->usb_ep.caps.dir_in = true; + else + ep->usb_ep.caps.dir_out = true; + + /* ep->ep_num is the index inside bdc_ep */ + if (epnum == 1) { + ep->ep_num = 1; + bdc->bdc_ep_array[ep->ep_num] = ep; + snprintf(ep->name, sizeof(ep->name), "ep%d", epnum - 1); + usb_ep_set_maxpacket_limit(&ep->usb_ep, EP0_MAX_PKT_SIZE); + ep->usb_ep.caps.type_control = true; + ep->comp_desc = NULL; + bdc->gadget.ep0 = &ep->usb_ep; + } else { + if (dir) + ep->ep_num = epnum * 2 - 1; + else + ep->ep_num = epnum * 2 - 2; + + bdc->bdc_ep_array[ep->ep_num] = ep; + snprintf(ep->name, sizeof(ep->name), "ep%d%s", epnum - 1, + dir & 1 ? "in" : "out"); + + usb_ep_set_maxpacket_limit(&ep->usb_ep, 1024); + ep->usb_ep.caps.type_iso = true; + ep->usb_ep.caps.type_bulk = true; + ep->usb_ep.caps.type_int = true; + ep->usb_ep.max_streams = 0; + list_add_tail(&ep->usb_ep.ep_list, &bdc->gadget.ep_list); + } + ep->usb_ep.ops = &bdc_gadget_ep_ops; + ep->usb_ep.name = ep->name; + ep->flags = 0; + ep->ignore_next_sr = false; + dev_dbg(bdc->dev, "ep=%p ep->usb_ep.name=%s epnum=%d ep->epnum=%d\n", + ep, ep->usb_ep.name, epnum, ep->ep_num); + + INIT_LIST_HEAD(&ep->queue); + + return 0; +} + +/* Init all ep */ +int bdc_init_ep(struct bdc *bdc) +{ + u8 epnum; + int ret; + + dev_dbg(bdc->dev, "%s()\n", __func__); + INIT_LIST_HEAD(&bdc->gadget.ep_list); + /* init ep0 */ + ret = init_ep(bdc, 1, 0); + if (ret) { + dev_err(bdc->dev, "init ep ep0 fail %d\n", ret); + return ret; + } + + for (epnum = 2; epnum <= bdc->num_eps / 2; epnum++) { + /* OUT */ + ret = init_ep(bdc, epnum, 0); + if (ret) { + dev_err(bdc->dev, + "init ep failed for:%d error: %d\n", + epnum, ret); + return ret; + } + + /* IN */ + ret = init_ep(bdc, epnum, 1); + if (ret) { + dev_err(bdc->dev, + "init ep failed for:%d error: %d\n", + epnum, ret); + return ret; + } + } + + return 0; +} diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.h b/drivers/usb/gadget/udc/bdc/bdc_ep.h new file mode 100644 index 000000000..4d3affd07 --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc_ep.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * bdc_ep.h - header for the BDC debug functions + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + */ +#ifndef __LINUX_BDC_EP_H__ +#define __LINUX_BDC_EP_H__ + +int bdc_init_ep(struct bdc *bdc); +int bdc_ep_disable(struct bdc_ep *ep); +int bdc_ep_enable(struct bdc_ep *ep); +void bdc_free_ep(struct bdc *bdc); + +#endif /* __LINUX_BDC_EP_H__ */ diff --git a/drivers/usb/gadget/udc/bdc/bdc_udc.c b/drivers/usb/gadget/udc/bdc/bdc_udc.c new file mode 100644 index 000000000..53ffaf4e2 --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc_udc.c @@ -0,0 +1,590 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * bdc_udc.c - BRCM BDC USB3.0 device controller gagdet ops + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + * + * Based on drivers under drivers/usb/gadget/udc/ + */ +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/otg.h> +#include <linux/pm.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <asm/unaligned.h> +#include <linux/platform_device.h> + +#include "bdc.h" +#include "bdc_ep.h" +#include "bdc_cmd.h" +#include "bdc_dbg.h" + +static const struct usb_gadget_ops bdc_gadget_ops; + +static const char * const conn_speed_str[] = { + "Not connected", + "Full Speed", + "Low Speed", + "High Speed", + "Super Speed", +}; + +/* EP0 initial descripror */ +static struct usb_endpoint_descriptor bdc_gadget_ep0_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_CONTROL, + .bEndpointAddress = 0, + .wMaxPacketSize = cpu_to_le16(EP0_MAX_PKT_SIZE), +}; + +/* Advance the srr dqp maintained by SW */ +static void srr_dqp_index_advc(struct bdc *bdc, u32 srr_num) +{ + struct srr *srr; + + srr = &bdc->srr; + dev_dbg_ratelimited(bdc->dev, "srr->dqp_index:%d\n", srr->dqp_index); + srr->dqp_index++; + /* rollback to 0 if we are past the last */ + if (srr->dqp_index == NUM_SR_ENTRIES) + srr->dqp_index = 0; +} + +/* connect sr */ +static void bdc_uspc_connected(struct bdc *bdc) +{ + u32 speed, temp; + u32 usppms; + int ret; + + temp = bdc_readl(bdc->regs, BDC_USPC); + speed = BDC_PSP(temp); + dev_dbg(bdc->dev, "%s speed=%x\n", __func__, speed); + switch (speed) { + case BDC_SPEED_SS: + bdc_gadget_ep0_desc.wMaxPacketSize = + cpu_to_le16(EP0_MAX_PKT_SIZE); + bdc->gadget.ep0->maxpacket = EP0_MAX_PKT_SIZE; + bdc->gadget.speed = USB_SPEED_SUPER; + /* Enable U1T in SS mode */ + usppms = bdc_readl(bdc->regs, BDC_USPPMS); + usppms &= ~BDC_U1T(0xff); + usppms |= BDC_U1T(U1_TIMEOUT); + usppms |= BDC_PORT_W1S; + bdc_writel(bdc->regs, BDC_USPPMS, usppms); + break; + + case BDC_SPEED_HS: + bdc_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64); + bdc->gadget.ep0->maxpacket = 64; + bdc->gadget.speed = USB_SPEED_HIGH; + break; + + case BDC_SPEED_FS: + bdc_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64); + bdc->gadget.ep0->maxpacket = 64; + bdc->gadget.speed = USB_SPEED_FULL; + break; + + case BDC_SPEED_LS: + bdc_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8); + bdc->gadget.ep0->maxpacket = 8; + bdc->gadget.speed = USB_SPEED_LOW; + break; + default: + dev_err(bdc->dev, "UNDEFINED SPEED\n"); + return; + } + dev_dbg(bdc->dev, "connected at %s\n", conn_speed_str[speed]); + /* Now we know the speed, configure ep0 */ + bdc->bdc_ep_array[1]->desc = &bdc_gadget_ep0_desc; + ret = bdc_config_ep(bdc, bdc->bdc_ep_array[1]); + if (ret) + dev_err(bdc->dev, "EP0 config failed\n"); + bdc->bdc_ep_array[1]->usb_ep.desc = &bdc_gadget_ep0_desc; + bdc->bdc_ep_array[1]->flags |= BDC_EP_ENABLED; + usb_gadget_set_state(&bdc->gadget, USB_STATE_DEFAULT); +} + +/* device got disconnected */ +static void bdc_uspc_disconnected(struct bdc *bdc, bool reinit) +{ + struct bdc_ep *ep; + + dev_dbg(bdc->dev, "%s\n", __func__); + /* + * Only stop ep0 from here, rest of the endpoints will be disabled + * from gadget_disconnect + */ + ep = bdc->bdc_ep_array[1]; + if (ep && (ep->flags & BDC_EP_ENABLED)) + /* if enabled then stop and remove requests */ + bdc_ep_disable(ep); + + if (bdc->gadget_driver && bdc->gadget_driver->disconnect) { + spin_unlock(&bdc->lock); + bdc->gadget_driver->disconnect(&bdc->gadget); + spin_lock(&bdc->lock); + } + /* Set Unknown speed */ + bdc->gadget.speed = USB_SPEED_UNKNOWN; + bdc->devstatus &= DEVSTATUS_CLEAR; + bdc->delayed_status = false; + bdc->reinit = reinit; + bdc->test_mode = false; + usb_gadget_set_state(&bdc->gadget, USB_STATE_NOTATTACHED); +} + +/* TNotify wkaeup timer */ +static void bdc_func_wake_timer(struct work_struct *work) +{ + struct bdc *bdc = container_of(work, struct bdc, func_wake_notify.work); + unsigned long flags; + + dev_dbg(bdc->dev, "%s\n", __func__); + spin_lock_irqsave(&bdc->lock, flags); + /* + * Check if host has started transferring on endpoints + * FUNC_WAKE_ISSUED is cleared when transfer has started after resume + */ + if (bdc->devstatus & FUNC_WAKE_ISSUED) { + dev_dbg(bdc->dev, "FUNC_WAKE_ISSUED FLAG IS STILL SET\n"); + /* flag is still set, so again send func wake */ + bdc_function_wake_fh(bdc, 0); + schedule_delayed_work(&bdc->func_wake_notify, + msecs_to_jiffies(BDC_TNOTIFY)); + } + spin_unlock_irqrestore(&bdc->lock, flags); +} + +/* handler for Link state change condition */ +static void handle_link_state_change(struct bdc *bdc, u32 uspc) +{ + u32 link_state; + + dev_dbg(bdc->dev, "Link state change"); + link_state = BDC_PST(uspc); + switch (link_state) { + case BDC_LINK_STATE_U3: + if ((bdc->gadget.speed != USB_SPEED_UNKNOWN) && + bdc->gadget_driver->suspend) { + dev_dbg(bdc->dev, "Entered Suspend mode\n"); + spin_unlock(&bdc->lock); + bdc->devstatus |= DEVICE_SUSPENDED; + bdc->gadget_driver->suspend(&bdc->gadget); + spin_lock(&bdc->lock); + } + break; + case BDC_LINK_STATE_U0: + if (bdc->devstatus & REMOTE_WAKEUP_ISSUED) { + bdc->devstatus &= ~REMOTE_WAKEUP_ISSUED; + if (bdc->gadget.speed == USB_SPEED_SUPER) { + bdc_function_wake_fh(bdc, 0); + bdc->devstatus |= FUNC_WAKE_ISSUED; + /* + * Start a Notification timer and check if the + * Host transferred anything on any of the EPs, + * if not then send function wake again every + * TNotification secs until host initiates + * transfer to BDC, USB3 spec Table 8.13 + */ + schedule_delayed_work( + &bdc->func_wake_notify, + msecs_to_jiffies(BDC_TNOTIFY)); + dev_dbg(bdc->dev, "sched func_wake_notify\n"); + } + } + break; + + case BDC_LINK_STATE_RESUME: + dev_dbg(bdc->dev, "Resumed from Suspend\n"); + if (bdc->devstatus & DEVICE_SUSPENDED) { + bdc->gadget_driver->resume(&bdc->gadget); + bdc->devstatus &= ~DEVICE_SUSPENDED; + } + break; + default: + dev_dbg(bdc->dev, "link state:%d\n", link_state); + } +} + +/* something changes on upstream port, handle it here */ +void bdc_sr_uspc(struct bdc *bdc, struct bdc_sr *sreport) +{ + u32 clear_flags = 0; + u32 uspc; + bool connected = false; + bool disconn = false; + + uspc = bdc_readl(bdc->regs, BDC_USPC); + dev_dbg(bdc->dev, "%s uspc=0x%08x\n", __func__, uspc); + + /* Port connect changed */ + if (uspc & BDC_PCC) { + /* Vbus not present, and not connected to Downstream port */ + if ((uspc & BDC_VBC) && !(uspc & BDC_VBS) && !(uspc & BDC_PCS)) + disconn = true; + else if ((uspc & BDC_PCS) && !BDC_PST(uspc)) + connected = true; + clear_flags |= BDC_PCC; + } + + /* Change in VBus and VBus is present */ + if ((uspc & BDC_VBC) && (uspc & BDC_VBS)) { + if (bdc->pullup) { + dev_dbg(bdc->dev, "Do a softconnect\n"); + /* Attached state, do a softconnect */ + bdc_softconn(bdc); + usb_gadget_set_state(&bdc->gadget, USB_STATE_POWERED); + } + clear_flags |= BDC_VBC; + } else if ((uspc & BDC_PRS) || (uspc & BDC_PRC) || disconn) { + /* Hot reset, warm reset, 2.0 bus reset or disconn */ + dev_dbg(bdc->dev, "Port reset or disconn\n"); + bdc_uspc_disconnected(bdc, disconn); + clear_flags |= BDC_PRC; + } else if ((uspc & BDC_PSC) && (uspc & BDC_PCS)) { + /* Change in Link state */ + handle_link_state_change(bdc, uspc); + clear_flags |= BDC_PSC; + } + + /* + * In SS we might not have PRC bit set before connection, but in 2.0 + * the PRC bit is set before connection, so moving this condition out + * of bus reset to handle both SS/2.0 speeds. + */ + if (connected) { + /* This is the connect event for U0/L0 */ + dev_dbg(bdc->dev, "Connected\n"); + bdc_uspc_connected(bdc); + bdc->devstatus &= ~(DEVICE_SUSPENDED); + } + uspc = bdc_readl(bdc->regs, BDC_USPC); + uspc &= (~BDC_USPSC_RW); + dev_dbg(bdc->dev, "uspc=%x\n", uspc); + bdc_writel(bdc->regs, BDC_USPC, clear_flags); +} + +/* Main interrupt handler for bdc */ +static irqreturn_t bdc_udc_interrupt(int irq, void *_bdc) +{ + u32 eqp_index, dqp_index, sr_type, srr_int; + struct bdc_sr *sreport; + struct bdc *bdc = _bdc; + u32 status; + int ret; + + spin_lock(&bdc->lock); + status = bdc_readl(bdc->regs, BDC_BDCSC); + if (!(status & BDC_GIP)) { + spin_unlock(&bdc->lock); + return IRQ_NONE; + } + srr_int = bdc_readl(bdc->regs, BDC_SRRINT(0)); + /* Check if the SRR IP bit it set? */ + if (!(srr_int & BDC_SRR_IP)) { + dev_warn(bdc->dev, "Global irq pending but SRR IP is 0\n"); + spin_unlock(&bdc->lock); + return IRQ_NONE; + } + eqp_index = BDC_SRR_EPI(srr_int); + dqp_index = BDC_SRR_DPI(srr_int); + dev_dbg(bdc->dev, + "%s eqp_index=%d dqp_index=%d srr.dqp_index=%d\n\n", + __func__, eqp_index, dqp_index, bdc->srr.dqp_index); + + /* check for ring empty condition */ + if (eqp_index == dqp_index) { + dev_dbg(bdc->dev, "SRR empty?\n"); + spin_unlock(&bdc->lock); + return IRQ_HANDLED; + } + + while (bdc->srr.dqp_index != eqp_index) { + sreport = &bdc->srr.sr_bds[bdc->srr.dqp_index]; + /* sreport is read before using it */ + rmb(); + sr_type = le32_to_cpu(sreport->offset[3]) & BD_TYPE_BITMASK; + dev_dbg_ratelimited(bdc->dev, "sr_type=%d\n", sr_type); + switch (sr_type) { + case SR_XSF: + bdc->sr_handler[0](bdc, sreport); + break; + + case SR_USPC: + bdc->sr_handler[1](bdc, sreport); + break; + default: + dev_warn(bdc->dev, "SR:%d not handled\n", sr_type); + } + /* Advance the srr dqp index */ + srr_dqp_index_advc(bdc, 0); + } + /* update the hw dequeue pointer */ + srr_int = bdc_readl(bdc->regs, BDC_SRRINT(0)); + srr_int &= ~BDC_SRR_DPI_MASK; + srr_int &= ~(BDC_SRR_RWS|BDC_SRR_RST|BDC_SRR_ISR); + srr_int |= ((bdc->srr.dqp_index) << 16); + srr_int |= BDC_SRR_IP; + bdc_writel(bdc->regs, BDC_SRRINT(0), srr_int); + srr_int = bdc_readl(bdc->regs, BDC_SRRINT(0)); + if (bdc->reinit) { + ret = bdc_reinit(bdc); + if (ret) + dev_err(bdc->dev, "err in bdc reinit\n"); + } + + spin_unlock(&bdc->lock); + + return IRQ_HANDLED; +} + +/* Gadget ops */ +static int bdc_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct bdc *bdc = gadget_to_bdc(gadget); + unsigned long flags; + int ret = 0; + + dev_dbg(bdc->dev, "%s()\n", __func__); + spin_lock_irqsave(&bdc->lock, flags); + if (bdc->gadget_driver) { + dev_err(bdc->dev, "%s is already bound to %s\n", + bdc->gadget.name, + bdc->gadget_driver->driver.name); + ret = -EBUSY; + goto err; + } + /* + * Run the controller from here and when BDC is connected to + * Host then driver will receive a USPC SR with VBUS present + * and then driver will do a softconnect. + */ + ret = bdc_run(bdc); + if (ret) { + dev_err(bdc->dev, "%s bdc run fail\n", __func__); + goto err; + } + bdc->gadget_driver = driver; + bdc->gadget.dev.driver = &driver->driver; +err: + spin_unlock_irqrestore(&bdc->lock, flags); + + return ret; +} + +static int bdc_udc_stop(struct usb_gadget *gadget) +{ + struct bdc *bdc = gadget_to_bdc(gadget); + unsigned long flags; + + dev_dbg(bdc->dev, "%s()\n", __func__); + spin_lock_irqsave(&bdc->lock, flags); + bdc_stop(bdc); + bdc->gadget_driver = NULL; + bdc->gadget.dev.driver = NULL; + spin_unlock_irqrestore(&bdc->lock, flags); + + return 0; +} + +static int bdc_udc_pullup(struct usb_gadget *gadget, int is_on) +{ + struct bdc *bdc = gadget_to_bdc(gadget); + unsigned long flags; + u32 uspc; + + dev_dbg(bdc->dev, "%s() is_on:%d\n", __func__, is_on); + if (!gadget) + return -EINVAL; + + spin_lock_irqsave(&bdc->lock, flags); + if (!is_on) { + bdc_softdisconn(bdc); + bdc->pullup = false; + } else { + /* + * For a self powered device, we need to wait till we receive + * a VBUS change and Vbus present event, then if pullup flag + * is set, then only we present the Termintation. + */ + bdc->pullup = true; + /* + * Check if BDC is already connected to Host i.e Vbus=1, + * if yes, then present TERM now, this is typical for bus + * powered devices. + */ + uspc = bdc_readl(bdc->regs, BDC_USPC); + if (uspc & BDC_VBS) + bdc_softconn(bdc); + } + spin_unlock_irqrestore(&bdc->lock, flags); + + return 0; +} + +static int bdc_udc_set_selfpowered(struct usb_gadget *gadget, + int is_self) +{ + struct bdc *bdc = gadget_to_bdc(gadget); + unsigned long flags; + + dev_dbg(bdc->dev, "%s()\n", __func__); + gadget->is_selfpowered = (is_self != 0); + spin_lock_irqsave(&bdc->lock, flags); + if (!is_self) + bdc->devstatus |= 1 << USB_DEVICE_SELF_POWERED; + else + bdc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED); + + spin_unlock_irqrestore(&bdc->lock, flags); + + return 0; +} + +static int bdc_udc_wakeup(struct usb_gadget *gadget) +{ + struct bdc *bdc = gadget_to_bdc(gadget); + unsigned long flags; + u8 link_state; + u32 uspc; + int ret = 0; + + dev_dbg(bdc->dev, + "%s() bdc->devstatus=%08x\n", + __func__, bdc->devstatus); + + if (!(bdc->devstatus & REMOTE_WAKE_ENABLE)) + return -EOPNOTSUPP; + + spin_lock_irqsave(&bdc->lock, flags); + uspc = bdc_readl(bdc->regs, BDC_USPC); + link_state = BDC_PST(uspc); + dev_dbg(bdc->dev, "link_state =%d portsc=%x", link_state, uspc); + if (link_state != BDC_LINK_STATE_U3) { + dev_warn(bdc->dev, + "can't wakeup from link state %d\n", + link_state); + ret = -EINVAL; + goto out; + } + if (bdc->gadget.speed == USB_SPEED_SUPER) + bdc->devstatus |= REMOTE_WAKEUP_ISSUED; + + uspc &= ~BDC_PST_MASK; + uspc &= (~BDC_USPSC_RW); + uspc |= BDC_PST(BDC_LINK_STATE_U0); + uspc |= BDC_SWS; + bdc_writel(bdc->regs, BDC_USPC, uspc); + uspc = bdc_readl(bdc->regs, BDC_USPC); + link_state = BDC_PST(uspc); + dev_dbg(bdc->dev, "link_state =%d portsc=%x", link_state, uspc); +out: + spin_unlock_irqrestore(&bdc->lock, flags); + + return ret; +} + +static const struct usb_gadget_ops bdc_gadget_ops = { + .wakeup = bdc_udc_wakeup, + .set_selfpowered = bdc_udc_set_selfpowered, + .pullup = bdc_udc_pullup, + .udc_start = bdc_udc_start, + .udc_stop = bdc_udc_stop, +}; + +/* Init the gadget interface and register the udc */ +int bdc_udc_init(struct bdc *bdc) +{ + u32 temp; + int ret; + + dev_dbg(bdc->dev, "%s()\n", __func__); + bdc->gadget.ops = &bdc_gadget_ops; + bdc->gadget.max_speed = USB_SPEED_SUPER; + bdc->gadget.speed = USB_SPEED_UNKNOWN; + bdc->gadget.dev.parent = bdc->dev; + + bdc->gadget.sg_supported = false; + + + bdc->gadget.name = BRCM_BDC_NAME; + ret = devm_request_irq(bdc->dev, bdc->irq, bdc_udc_interrupt, + IRQF_SHARED, BRCM_BDC_NAME, bdc); + if (ret) { + dev_err(bdc->dev, + "failed to request irq #%d %d\n", + bdc->irq, ret); + return ret; + } + + ret = bdc_init_ep(bdc); + if (ret) { + dev_err(bdc->dev, "bdc init ep fail: %d\n", ret); + return ret; + } + + ret = usb_add_gadget_udc(bdc->dev, &bdc->gadget); + if (ret) { + dev_err(bdc->dev, "failed to register udc\n"); + goto err0; + } + usb_gadget_set_state(&bdc->gadget, USB_STATE_NOTATTACHED); + bdc->bdc_ep_array[1]->desc = &bdc_gadget_ep0_desc; + /* + * Allocate bd list for ep0 only, ep0 will be enabled on connect + * status report when the speed is known + */ + ret = bdc_ep_enable(bdc->bdc_ep_array[1]); + if (ret) { + dev_err(bdc->dev, "fail to enable %s\n", + bdc->bdc_ep_array[1]->name); + goto err1; + } + INIT_DELAYED_WORK(&bdc->func_wake_notify, bdc_func_wake_timer); + /* Enable Interrupts */ + temp = bdc_readl(bdc->regs, BDC_BDCSC); + temp |= BDC_GIE; + bdc_writel(bdc->regs, BDC_BDCSC, temp); + return 0; +err1: + usb_del_gadget_udc(&bdc->gadget); +err0: + bdc_free_ep(bdc); + + return ret; +} + +void bdc_udc_exit(struct bdc *bdc) +{ + unsigned long flags; + + dev_dbg(bdc->dev, "%s()\n", __func__); + spin_lock_irqsave(&bdc->lock, flags); + bdc_ep_disable(bdc->bdc_ep_array[1]); + spin_unlock_irqrestore(&bdc->lock, flags); + + usb_del_gadget_udc(&bdc->gadget); + bdc_free_ep(bdc); +} diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c new file mode 100644 index 000000000..c40f2ecbe --- /dev/null +++ b/drivers/usb/gadget/udc/core.c @@ -0,0 +1,1877 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * udc.c - Core UDC Framework + * + * Copyright (C) 2010 Texas Instruments + * Author: Felipe Balbi <balbi@ti.com> + */ + +#define pr_fmt(fmt) "UDC core: " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/idr.h> +#include <linux/err.h> +#include <linux/dma-mapping.h> +#include <linux/sched/task_stack.h> +#include <linux/workqueue.h> + +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb.h> + +#include "trace.h" + +static DEFINE_IDA(gadget_id_numbers); + +static struct bus_type gadget_bus_type; + +/** + * struct usb_udc - describes one usb device controller + * @driver: the gadget driver pointer. For use by the class code + * @dev: the child device to the actual controller + * @gadget: the gadget. For use by the class code + * @list: for use by the udc class driver + * @vbus: for udcs who care about vbus status, this value is real vbus status; + * for udcs who do not care about vbus status, this value is always true + * @started: the UDC's started state. True if the UDC had started. + * @allow_connect: Indicates whether UDC is allowed to be pulled up. + * Set/cleared by gadget_(un)bind_driver() after gadget driver is bound or + * unbound. + * @vbus_work: work routine to handle VBUS status change notifications. + * @connect_lock: protects udc->started, gadget->connect, + * gadget->allow_connect and gadget->deactivate. The routines + * usb_gadget_connect_locked(), usb_gadget_disconnect_locked(), + * usb_udc_connect_control_locked(), usb_gadget_udc_start_locked() and + * usb_gadget_udc_stop_locked() are called with this lock held. + * + * This represents the internal data structure which is used by the UDC-class + * to hold information about udc driver and gadget together. + */ +struct usb_udc { + struct usb_gadget_driver *driver; + struct usb_gadget *gadget; + struct device dev; + struct list_head list; + bool vbus; + bool started; + bool allow_connect; + struct work_struct vbus_work; + struct mutex connect_lock; +}; + +static struct class *udc_class; +static LIST_HEAD(udc_list); + +/* Protects udc_list, udc->driver, driver->is_bound, and related calls */ +static DEFINE_MUTEX(udc_lock); + +/* ------------------------------------------------------------------------- */ + +/** + * usb_ep_set_maxpacket_limit - set maximum packet size limit for endpoint + * @ep:the endpoint being configured + * @maxpacket_limit:value of maximum packet size limit + * + * This function should be used only in UDC drivers to initialize endpoint + * (usually in probe function). + */ +void usb_ep_set_maxpacket_limit(struct usb_ep *ep, + unsigned maxpacket_limit) +{ + ep->maxpacket_limit = maxpacket_limit; + ep->maxpacket = maxpacket_limit; + + trace_usb_ep_set_maxpacket_limit(ep, 0); +} +EXPORT_SYMBOL_GPL(usb_ep_set_maxpacket_limit); + +/** + * usb_ep_enable - configure endpoint, making it usable + * @ep:the endpoint being configured. may not be the endpoint named "ep0". + * drivers discover endpoints through the ep_list of a usb_gadget. + * + * When configurations are set, or when interface settings change, the driver + * will enable or disable the relevant endpoints. while it is enabled, an + * endpoint may be used for i/o until the driver receives a disconnect() from + * the host or until the endpoint is disabled. + * + * the ep0 implementation (which calls this routine) must ensure that the + * hardware capabilities of each endpoint match the descriptor provided + * for it. for example, an endpoint named "ep2in-bulk" would be usable + * for interrupt transfers as well as bulk, but it likely couldn't be used + * for iso transfers or for endpoint 14. some endpoints are fully + * configurable, with more generic names like "ep-a". (remember that for + * USB, "in" means "towards the USB host".) + * + * This routine may be called in an atomic (interrupt) context. + * + * returns zero, or a negative error code. + */ +int usb_ep_enable(struct usb_ep *ep) +{ + int ret = 0; + + if (ep->enabled) + goto out; + + /* UDC drivers can't handle endpoints with maxpacket size 0 */ + if (usb_endpoint_maxp(ep->desc) == 0) { + /* + * We should log an error message here, but we can't call + * dev_err() because there's no way to find the gadget + * given only ep. + */ + ret = -EINVAL; + goto out; + } + + ret = ep->ops->enable(ep, ep->desc); + if (ret) + goto out; + + ep->enabled = true; + +out: + trace_usb_ep_enable(ep, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(usb_ep_enable); + +/** + * usb_ep_disable - endpoint is no longer usable + * @ep:the endpoint being unconfigured. may not be the endpoint named "ep0". + * + * no other task may be using this endpoint when this is called. + * any pending and uncompleted requests will complete with status + * indicating disconnect (-ESHUTDOWN) before this call returns. + * gadget drivers must call usb_ep_enable() again before queueing + * requests to the endpoint. + * + * This routine may be called in an atomic (interrupt) context. + * + * returns zero, or a negative error code. + */ +int usb_ep_disable(struct usb_ep *ep) +{ + int ret = 0; + + if (!ep->enabled) + goto out; + + ret = ep->ops->disable(ep); + if (ret) + goto out; + + ep->enabled = false; + +out: + trace_usb_ep_disable(ep, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(usb_ep_disable); + +/** + * usb_ep_alloc_request - allocate a request object to use with this endpoint + * @ep:the endpoint to be used with with the request + * @gfp_flags:GFP_* flags to use + * + * Request objects must be allocated with this call, since they normally + * need controller-specific setup and may even need endpoint-specific + * resources such as allocation of DMA descriptors. + * Requests may be submitted with usb_ep_queue(), and receive a single + * completion callback. Free requests with usb_ep_free_request(), when + * they are no longer needed. + * + * Returns the request, or null if one could not be allocated. + */ +struct usb_request *usb_ep_alloc_request(struct usb_ep *ep, + gfp_t gfp_flags) +{ + struct usb_request *req = NULL; + + req = ep->ops->alloc_request(ep, gfp_flags); + + trace_usb_ep_alloc_request(ep, req, req ? 0 : -ENOMEM); + + return req; +} +EXPORT_SYMBOL_GPL(usb_ep_alloc_request); + +/** + * usb_ep_free_request - frees a request object + * @ep:the endpoint associated with the request + * @req:the request being freed + * + * Reverses the effect of usb_ep_alloc_request(). + * Caller guarantees the request is not queued, and that it will + * no longer be requeued (or otherwise used). + */ +void usb_ep_free_request(struct usb_ep *ep, + struct usb_request *req) +{ + trace_usb_ep_free_request(ep, req, 0); + ep->ops->free_request(ep, req); +} +EXPORT_SYMBOL_GPL(usb_ep_free_request); + +/** + * usb_ep_queue - queues (submits) an I/O request to an endpoint. + * @ep:the endpoint associated with the request + * @req:the request being submitted + * @gfp_flags: GFP_* flags to use in case the lower level driver couldn't + * pre-allocate all necessary memory with the request. + * + * This tells the device controller to perform the specified request through + * that endpoint (reading or writing a buffer). When the request completes, + * including being canceled by usb_ep_dequeue(), the request's completion + * routine is called to return the request to the driver. Any endpoint + * (except control endpoints like ep0) may have more than one transfer + * request queued; they complete in FIFO order. Once a gadget driver + * submits a request, that request may not be examined or modified until it + * is given back to that driver through the completion callback. + * + * Each request is turned into one or more packets. The controller driver + * never merges adjacent requests into the same packet. OUT transfers + * will sometimes use data that's already buffered in the hardware. + * Drivers can rely on the fact that the first byte of the request's buffer + * always corresponds to the first byte of some USB packet, for both + * IN and OUT transfers. + * + * Bulk endpoints can queue any amount of data; the transfer is packetized + * automatically. The last packet will be short if the request doesn't fill it + * out completely. Zero length packets (ZLPs) should be avoided in portable + * protocols since not all usb hardware can successfully handle zero length + * packets. (ZLPs may be explicitly written, and may be implicitly written if + * the request 'zero' flag is set.) Bulk endpoints may also be used + * for interrupt transfers; but the reverse is not true, and some endpoints + * won't support every interrupt transfer. (Such as 768 byte packets.) + * + * Interrupt-only endpoints are less functional than bulk endpoints, for + * example by not supporting queueing or not handling buffers that are + * larger than the endpoint's maxpacket size. They may also treat data + * toggle differently. + * + * Control endpoints ... after getting a setup() callback, the driver queues + * one response (even if it would be zero length). That enables the + * status ack, after transferring data as specified in the response. Setup + * functions may return negative error codes to generate protocol stalls. + * (Note that some USB device controllers disallow protocol stall responses + * in some cases.) When control responses are deferred (the response is + * written after the setup callback returns), then usb_ep_set_halt() may be + * used on ep0 to trigger protocol stalls. Depending on the controller, + * it may not be possible to trigger a status-stage protocol stall when the + * data stage is over, that is, from within the response's completion + * routine. + * + * For periodic endpoints, like interrupt or isochronous ones, the usb host + * arranges to poll once per interval, and the gadget driver usually will + * have queued some data to transfer at that time. + * + * Note that @req's ->complete() callback must never be called from + * within usb_ep_queue() as that can create deadlock situations. + * + * This routine may be called in interrupt context. + * + * Returns zero, or a negative error code. Endpoints that are not enabled + * report errors; errors will also be + * reported when the usb peripheral is disconnected. + * + * If and only if @req is successfully queued (the return value is zero), + * @req->complete() will be called exactly once, when the Gadget core and + * UDC are finished with the request. When the completion function is called, + * control of the request is returned to the device driver which submitted it. + * The completion handler may then immediately free or reuse @req. + */ +int usb_ep_queue(struct usb_ep *ep, + struct usb_request *req, gfp_t gfp_flags) +{ + int ret = 0; + + if (WARN_ON_ONCE(!ep->enabled && ep->address)) { + ret = -ESHUTDOWN; + goto out; + } + + ret = ep->ops->queue(ep, req, gfp_flags); + +out: + trace_usb_ep_queue(ep, req, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(usb_ep_queue); + +/** + * usb_ep_dequeue - dequeues (cancels, unlinks) an I/O request from an endpoint + * @ep:the endpoint associated with the request + * @req:the request being canceled + * + * If the request is still active on the endpoint, it is dequeued and + * eventually its completion routine is called (with status -ECONNRESET); + * else a negative error code is returned. This routine is asynchronous, + * that is, it may return before the completion routine runs. + * + * Note that some hardware can't clear out write fifos (to unlink the request + * at the head of the queue) except as part of disconnecting from usb. Such + * restrictions prevent drivers from supporting configuration changes, + * even to configuration zero (a "chapter 9" requirement). + * + * This routine may be called in interrupt context. + */ +int usb_ep_dequeue(struct usb_ep *ep, struct usb_request *req) +{ + int ret; + + ret = ep->ops->dequeue(ep, req); + trace_usb_ep_dequeue(ep, req, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(usb_ep_dequeue); + +/** + * usb_ep_set_halt - sets the endpoint halt feature. + * @ep: the non-isochronous endpoint being stalled + * + * Use this to stall an endpoint, perhaps as an error report. + * Except for control endpoints, + * the endpoint stays halted (will not stream any data) until the host + * clears this feature; drivers may need to empty the endpoint's request + * queue first, to make sure no inappropriate transfers happen. + * + * Note that while an endpoint CLEAR_FEATURE will be invisible to the + * gadget driver, a SET_INTERFACE will not be. To reset endpoints for the + * current altsetting, see usb_ep_clear_halt(). When switching altsettings, + * it's simplest to use usb_ep_enable() or usb_ep_disable() for the endpoints. + * + * This routine may be called in interrupt context. + * + * Returns zero, or a negative error code. On success, this call sets + * underlying hardware state that blocks data transfers. + * Attempts to halt IN endpoints will fail (returning -EAGAIN) if any + * transfer requests are still queued, or if the controller hardware + * (usually a FIFO) still holds bytes that the host hasn't collected. + */ +int usb_ep_set_halt(struct usb_ep *ep) +{ + int ret; + + ret = ep->ops->set_halt(ep, 1); + trace_usb_ep_set_halt(ep, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(usb_ep_set_halt); + +/** + * usb_ep_clear_halt - clears endpoint halt, and resets toggle + * @ep:the bulk or interrupt endpoint being reset + * + * Use this when responding to the standard usb "set interface" request, + * for endpoints that aren't reconfigured, after clearing any other state + * in the endpoint's i/o queue. + * + * This routine may be called in interrupt context. + * + * Returns zero, or a negative error code. On success, this call clears + * the underlying hardware state reflecting endpoint halt and data toggle. + * Note that some hardware can't support this request (like pxa2xx_udc), + * and accordingly can't correctly implement interface altsettings. + */ +int usb_ep_clear_halt(struct usb_ep *ep) +{ + int ret; + + ret = ep->ops->set_halt(ep, 0); + trace_usb_ep_clear_halt(ep, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(usb_ep_clear_halt); + +/** + * usb_ep_set_wedge - sets the halt feature and ignores clear requests + * @ep: the endpoint being wedged + * + * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT) + * requests. If the gadget driver clears the halt status, it will + * automatically unwedge the endpoint. + * + * This routine may be called in interrupt context. + * + * Returns zero on success, else negative errno. + */ +int usb_ep_set_wedge(struct usb_ep *ep) +{ + int ret; + + if (ep->ops->set_wedge) + ret = ep->ops->set_wedge(ep); + else + ret = ep->ops->set_halt(ep, 1); + + trace_usb_ep_set_wedge(ep, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(usb_ep_set_wedge); + +/** + * usb_ep_fifo_status - returns number of bytes in fifo, or error + * @ep: the endpoint whose fifo status is being checked. + * + * FIFO endpoints may have "unclaimed data" in them in certain cases, + * such as after aborted transfers. Hosts may not have collected all + * the IN data written by the gadget driver (and reported by a request + * completion). The gadget driver may not have collected all the data + * written OUT to it by the host. Drivers that need precise handling for + * fault reporting or recovery may need to use this call. + * + * This routine may be called in interrupt context. + * + * This returns the number of such bytes in the fifo, or a negative + * errno if the endpoint doesn't use a FIFO or doesn't support such + * precise handling. + */ +int usb_ep_fifo_status(struct usb_ep *ep) +{ + int ret; + + if (ep->ops->fifo_status) + ret = ep->ops->fifo_status(ep); + else + ret = -EOPNOTSUPP; + + trace_usb_ep_fifo_status(ep, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(usb_ep_fifo_status); + +/** + * usb_ep_fifo_flush - flushes contents of a fifo + * @ep: the endpoint whose fifo is being flushed. + * + * This call may be used to flush the "unclaimed data" that may exist in + * an endpoint fifo after abnormal transaction terminations. The call + * must never be used except when endpoint is not being used for any + * protocol translation. + * + * This routine may be called in interrupt context. + */ +void usb_ep_fifo_flush(struct usb_ep *ep) +{ + if (ep->ops->fifo_flush) + ep->ops->fifo_flush(ep); + + trace_usb_ep_fifo_flush(ep, 0); +} +EXPORT_SYMBOL_GPL(usb_ep_fifo_flush); + +/* ------------------------------------------------------------------------- */ + +/** + * usb_gadget_frame_number - returns the current frame number + * @gadget: controller that reports the frame number + * + * Returns the usb frame number, normally eleven bits from a SOF packet, + * or negative errno if this device doesn't support this capability. + */ +int usb_gadget_frame_number(struct usb_gadget *gadget) +{ + int ret; + + ret = gadget->ops->get_frame(gadget); + + trace_usb_gadget_frame_number(gadget, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(usb_gadget_frame_number); + +/** + * usb_gadget_wakeup - tries to wake up the host connected to this gadget + * @gadget: controller used to wake up the host + * + * Returns zero on success, else negative error code if the hardware + * doesn't support such attempts, or its support has not been enabled + * by the usb host. Drivers must return device descriptors that report + * their ability to support this, or hosts won't enable it. + * + * This may also try to use SRP to wake the host and start enumeration, + * even if OTG isn't otherwise in use. OTG devices may also start + * remote wakeup even when hosts don't explicitly enable it. + */ +int usb_gadget_wakeup(struct usb_gadget *gadget) +{ + int ret = 0; + + if (!gadget->ops->wakeup) { + ret = -EOPNOTSUPP; + goto out; + } + + ret = gadget->ops->wakeup(gadget); + +out: + trace_usb_gadget_wakeup(gadget, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(usb_gadget_wakeup); + +/** + * usb_gadget_set_selfpowered - sets the device selfpowered feature. + * @gadget:the device being declared as self-powered + * + * this affects the device status reported by the hardware driver + * to reflect that it now has a local power supply. + * + * returns zero on success, else negative errno. + */ +int usb_gadget_set_selfpowered(struct usb_gadget *gadget) +{ + int ret = 0; + + if (!gadget->ops->set_selfpowered) { + ret = -EOPNOTSUPP; + goto out; + } + + ret = gadget->ops->set_selfpowered(gadget, 1); + +out: + trace_usb_gadget_set_selfpowered(gadget, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(usb_gadget_set_selfpowered); + +/** + * usb_gadget_clear_selfpowered - clear the device selfpowered feature. + * @gadget:the device being declared as bus-powered + * + * this affects the device status reported by the hardware driver. + * some hardware may not support bus-powered operation, in which + * case this feature's value can never change. + * + * returns zero on success, else negative errno. + */ +int usb_gadget_clear_selfpowered(struct usb_gadget *gadget) +{ + int ret = 0; + + if (!gadget->ops->set_selfpowered) { + ret = -EOPNOTSUPP; + goto out; + } + + ret = gadget->ops->set_selfpowered(gadget, 0); + +out: + trace_usb_gadget_clear_selfpowered(gadget, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(usb_gadget_clear_selfpowered); + +/** + * usb_gadget_vbus_connect - Notify controller that VBUS is powered + * @gadget:The device which now has VBUS power. + * Context: can sleep + * + * This call is used by a driver for an external transceiver (or GPIO) + * that detects a VBUS power session starting. Common responses include + * resuming the controller, activating the D+ (or D-) pullup to let the + * host detect that a USB device is attached, and starting to draw power + * (8mA or possibly more, especially after SET_CONFIGURATION). + * + * Returns zero on success, else negative errno. + */ +int usb_gadget_vbus_connect(struct usb_gadget *gadget) +{ + int ret = 0; + + if (!gadget->ops->vbus_session) { + ret = -EOPNOTSUPP; + goto out; + } + + ret = gadget->ops->vbus_session(gadget, 1); + +out: + trace_usb_gadget_vbus_connect(gadget, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(usb_gadget_vbus_connect); + +/** + * usb_gadget_vbus_draw - constrain controller's VBUS power usage + * @gadget:The device whose VBUS usage is being described + * @mA:How much current to draw, in milliAmperes. This should be twice + * the value listed in the configuration descriptor bMaxPower field. + * + * This call is used by gadget drivers during SET_CONFIGURATION calls, + * reporting how much power the device may consume. For example, this + * could affect how quickly batteries are recharged. + * + * Returns zero on success, else negative errno. + */ +int usb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA) +{ + int ret = 0; + + if (!gadget->ops->vbus_draw) { + ret = -EOPNOTSUPP; + goto out; + } + + ret = gadget->ops->vbus_draw(gadget, mA); + if (!ret) + gadget->mA = mA; + +out: + trace_usb_gadget_vbus_draw(gadget, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(usb_gadget_vbus_draw); + +/** + * usb_gadget_vbus_disconnect - notify controller about VBUS session end + * @gadget:the device whose VBUS supply is being described + * Context: can sleep + * + * This call is used by a driver for an external transceiver (or GPIO) + * that detects a VBUS power session ending. Common responses include + * reversing everything done in usb_gadget_vbus_connect(). + * + * Returns zero on success, else negative errno. + */ +int usb_gadget_vbus_disconnect(struct usb_gadget *gadget) +{ + int ret = 0; + + if (!gadget->ops->vbus_session) { + ret = -EOPNOTSUPP; + goto out; + } + + ret = gadget->ops->vbus_session(gadget, 0); + +out: + trace_usb_gadget_vbus_disconnect(gadget, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(usb_gadget_vbus_disconnect); + +static int usb_gadget_connect_locked(struct usb_gadget *gadget) + __must_hold(&gadget->udc->connect_lock) +{ + int ret = 0; + + if (!gadget->ops->pullup) { + ret = -EOPNOTSUPP; + goto out; + } + + if (gadget->deactivated || !gadget->udc->allow_connect || !gadget->udc->started) { + /* + * If the gadget isn't usable (because it is deactivated, + * unbound, or not yet started), we only save the new state. + * The gadget will be connected automatically when it is + * activated/bound/started. + */ + gadget->connected = true; + goto out; + } + + ret = gadget->ops->pullup(gadget, 1); + if (!ret) + gadget->connected = 1; + +out: + trace_usb_gadget_connect(gadget, ret); + + return ret; +} + +/** + * usb_gadget_connect - software-controlled connect to USB host + * @gadget:the peripheral being connected + * + * Enables the D+ (or potentially D-) pullup. The host will start + * enumerating this gadget when the pullup is active and a VBUS session + * is active (the link is powered). + * + * Returns zero on success, else negative errno. + */ +int usb_gadget_connect(struct usb_gadget *gadget) +{ + int ret; + + mutex_lock(&gadget->udc->connect_lock); + ret = usb_gadget_connect_locked(gadget); + mutex_unlock(&gadget->udc->connect_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(usb_gadget_connect); + +static int usb_gadget_disconnect_locked(struct usb_gadget *gadget) + __must_hold(&gadget->udc->connect_lock) +{ + int ret = 0; + + if (!gadget->ops->pullup) { + ret = -EOPNOTSUPP; + goto out; + } + + if (!gadget->connected) + goto out; + + if (gadget->deactivated || !gadget->udc->started) { + /* + * If gadget is deactivated we only save new state. + * Gadget will stay disconnected after activation. + */ + gadget->connected = false; + goto out; + } + + ret = gadget->ops->pullup(gadget, 0); + if (!ret) + gadget->connected = 0; + + mutex_lock(&udc_lock); + if (gadget->udc->driver) + gadget->udc->driver->disconnect(gadget); + mutex_unlock(&udc_lock); + +out: + trace_usb_gadget_disconnect(gadget, ret); + + return ret; +} + +/** + * usb_gadget_disconnect - software-controlled disconnect from USB host + * @gadget:the peripheral being disconnected + * + * Disables the D+ (or potentially D-) pullup, which the host may see + * as a disconnect (when a VBUS session is active). Not all systems + * support software pullup controls. + * + * Following a successful disconnect, invoke the ->disconnect() callback + * for the current gadget driver so that UDC drivers don't need to. + * + * Returns zero on success, else negative errno. + */ +int usb_gadget_disconnect(struct usb_gadget *gadget) +{ + int ret; + + mutex_lock(&gadget->udc->connect_lock); + ret = usb_gadget_disconnect_locked(gadget); + mutex_unlock(&gadget->udc->connect_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(usb_gadget_disconnect); + +/** + * usb_gadget_deactivate - deactivate function which is not ready to work + * @gadget: the peripheral being deactivated + * + * This routine may be used during the gadget driver bind() call to prevent + * the peripheral from ever being visible to the USB host, unless later + * usb_gadget_activate() is called. For example, user mode components may + * need to be activated before the system can talk to hosts. + * + * This routine may sleep; it must not be called in interrupt context + * (such as from within a gadget driver's disconnect() callback). + * + * Returns zero on success, else negative errno. + */ +int usb_gadget_deactivate(struct usb_gadget *gadget) +{ + int ret = 0; + + mutex_lock(&gadget->udc->connect_lock); + if (gadget->deactivated) + goto unlock; + + if (gadget->connected) { + ret = usb_gadget_disconnect_locked(gadget); + if (ret) + goto unlock; + + /* + * If gadget was being connected before deactivation, we want + * to reconnect it in usb_gadget_activate(). + */ + gadget->connected = true; + } + gadget->deactivated = true; + +unlock: + mutex_unlock(&gadget->udc->connect_lock); + trace_usb_gadget_deactivate(gadget, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(usb_gadget_deactivate); + +/** + * usb_gadget_activate - activate function which is not ready to work + * @gadget: the peripheral being activated + * + * This routine activates gadget which was previously deactivated with + * usb_gadget_deactivate() call. It calls usb_gadget_connect() if needed. + * + * This routine may sleep; it must not be called in interrupt context. + * + * Returns zero on success, else negative errno. + */ +int usb_gadget_activate(struct usb_gadget *gadget) +{ + int ret = 0; + + mutex_lock(&gadget->udc->connect_lock); + if (!gadget->deactivated) + goto unlock; + + gadget->deactivated = false; + + /* + * If gadget has been connected before deactivation, or became connected + * while it was being deactivated, we call usb_gadget_connect(). + */ + if (gadget->connected) + ret = usb_gadget_connect_locked(gadget); + +unlock: + mutex_unlock(&gadget->udc->connect_lock); + trace_usb_gadget_activate(gadget, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(usb_gadget_activate); + +/* ------------------------------------------------------------------------- */ + +#ifdef CONFIG_HAS_DMA + +int usb_gadget_map_request_by_dev(struct device *dev, + struct usb_request *req, int is_in) +{ + if (req->length == 0) + return 0; + + if (req->num_sgs) { + int mapped; + + mapped = dma_map_sg(dev, req->sg, req->num_sgs, + is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + if (mapped == 0) { + dev_err(dev, "failed to map SGs\n"); + return -EFAULT; + } + + req->num_mapped_sgs = mapped; + } else { + if (is_vmalloc_addr(req->buf)) { + dev_err(dev, "buffer is not dma capable\n"); + return -EFAULT; + } else if (object_is_on_stack(req->buf)) { + dev_err(dev, "buffer is on stack\n"); + return -EFAULT; + } + + req->dma = dma_map_single(dev, req->buf, req->length, + is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + + if (dma_mapping_error(dev, req->dma)) { + dev_err(dev, "failed to map buffer\n"); + return -EFAULT; + } + + req->dma_mapped = 1; + } + + return 0; +} +EXPORT_SYMBOL_GPL(usb_gadget_map_request_by_dev); + +int usb_gadget_map_request(struct usb_gadget *gadget, + struct usb_request *req, int is_in) +{ + return usb_gadget_map_request_by_dev(gadget->dev.parent, req, is_in); +} +EXPORT_SYMBOL_GPL(usb_gadget_map_request); + +void usb_gadget_unmap_request_by_dev(struct device *dev, + struct usb_request *req, int is_in) +{ + if (req->length == 0) + return; + + if (req->num_mapped_sgs) { + dma_unmap_sg(dev, req->sg, req->num_sgs, + is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + + req->num_mapped_sgs = 0; + } else if (req->dma_mapped) { + dma_unmap_single(dev, req->dma, req->length, + is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + req->dma_mapped = 0; + } +} +EXPORT_SYMBOL_GPL(usb_gadget_unmap_request_by_dev); + +void usb_gadget_unmap_request(struct usb_gadget *gadget, + struct usb_request *req, int is_in) +{ + usb_gadget_unmap_request_by_dev(gadget->dev.parent, req, is_in); +} +EXPORT_SYMBOL_GPL(usb_gadget_unmap_request); + +#endif /* CONFIG_HAS_DMA */ + +/* ------------------------------------------------------------------------- */ + +/** + * usb_gadget_giveback_request - give the request back to the gadget layer + * @ep: the endpoint to be used with with the request + * @req: the request being given back + * + * This is called by device controller drivers in order to return the + * completed request back to the gadget layer. + */ +void usb_gadget_giveback_request(struct usb_ep *ep, + struct usb_request *req) +{ + if (likely(req->status == 0)) + usb_led_activity(USB_LED_EVENT_GADGET); + + trace_usb_gadget_giveback_request(ep, req, 0); + + req->complete(ep, req); +} +EXPORT_SYMBOL_GPL(usb_gadget_giveback_request); + +/* ------------------------------------------------------------------------- */ + +/** + * gadget_find_ep_by_name - returns ep whose name is the same as sting passed + * in second parameter or NULL if searched endpoint not found + * @g: controller to check for quirk + * @name: name of searched endpoint + */ +struct usb_ep *gadget_find_ep_by_name(struct usb_gadget *g, const char *name) +{ + struct usb_ep *ep; + + gadget_for_each_ep(ep, g) { + if (!strcmp(ep->name, name)) + return ep; + } + + return NULL; +} +EXPORT_SYMBOL_GPL(gadget_find_ep_by_name); + +/* ------------------------------------------------------------------------- */ + +int usb_gadget_ep_match_desc(struct usb_gadget *gadget, + struct usb_ep *ep, struct usb_endpoint_descriptor *desc, + struct usb_ss_ep_comp_descriptor *ep_comp) +{ + u8 type; + u16 max; + int num_req_streams = 0; + + /* endpoint already claimed? */ + if (ep->claimed) + return 0; + + type = usb_endpoint_type(desc); + max = usb_endpoint_maxp(desc); + + if (usb_endpoint_dir_in(desc) && !ep->caps.dir_in) + return 0; + if (usb_endpoint_dir_out(desc) && !ep->caps.dir_out) + return 0; + + if (max > ep->maxpacket_limit) + return 0; + + /* "high bandwidth" works only at high speed */ + if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp_mult(desc) > 1) + return 0; + + switch (type) { + case USB_ENDPOINT_XFER_CONTROL: + /* only support ep0 for portable CONTROL traffic */ + return 0; + case USB_ENDPOINT_XFER_ISOC: + if (!ep->caps.type_iso) + return 0; + /* ISO: limit 1023 bytes full speed, 1024 high/super speed */ + if (!gadget_is_dualspeed(gadget) && max > 1023) + return 0; + break; + case USB_ENDPOINT_XFER_BULK: + if (!ep->caps.type_bulk) + return 0; + if (ep_comp && gadget_is_superspeed(gadget)) { + /* Get the number of required streams from the + * EP companion descriptor and see if the EP + * matches it + */ + num_req_streams = ep_comp->bmAttributes & 0x1f; + if (num_req_streams > ep->max_streams) + return 0; + } + break; + case USB_ENDPOINT_XFER_INT: + /* Bulk endpoints handle interrupt transfers, + * except the toggle-quirky iso-synch kind + */ + if (!ep->caps.type_int && !ep->caps.type_bulk) + return 0; + /* INT: limit 64 bytes full speed, 1024 high/super speed */ + if (!gadget_is_dualspeed(gadget) && max > 64) + return 0; + break; + } + + return 1; +} +EXPORT_SYMBOL_GPL(usb_gadget_ep_match_desc); + +/** + * usb_gadget_check_config - checks if the UDC can support the binded + * configuration + * @gadget: controller to check the USB configuration + * + * Ensure that a UDC is able to support the requested resources by a + * configuration, and that there are no resource limitations, such as + * internal memory allocated to all requested endpoints. + * + * Returns zero on success, else a negative errno. + */ +int usb_gadget_check_config(struct usb_gadget *gadget) +{ + if (gadget->ops->check_config) + return gadget->ops->check_config(gadget); + return 0; +} +EXPORT_SYMBOL_GPL(usb_gadget_check_config); + +/* ------------------------------------------------------------------------- */ + +static void usb_gadget_state_work(struct work_struct *work) +{ + struct usb_gadget *gadget = work_to_gadget(work); + struct usb_udc *udc = gadget->udc; + + if (udc) + sysfs_notify(&udc->dev.kobj, NULL, "state"); +} + +void usb_gadget_set_state(struct usb_gadget *gadget, + enum usb_device_state state) +{ + gadget->state = state; + schedule_work(&gadget->work); +} +EXPORT_SYMBOL_GPL(usb_gadget_set_state); + +/* ------------------------------------------------------------------------- */ + +/* Acquire connect_lock before calling this function. */ +static void usb_udc_connect_control_locked(struct usb_udc *udc) __must_hold(&udc->connect_lock) +{ + if (udc->vbus) + usb_gadget_connect_locked(udc->gadget); + else + usb_gadget_disconnect_locked(udc->gadget); +} + +static void vbus_event_work(struct work_struct *work) +{ + struct usb_udc *udc = container_of(work, struct usb_udc, vbus_work); + + mutex_lock(&udc->connect_lock); + usb_udc_connect_control_locked(udc); + mutex_unlock(&udc->connect_lock); +} + +/** + * usb_udc_vbus_handler - updates the udc core vbus status, and try to + * connect or disconnect gadget + * @gadget: The gadget which vbus change occurs + * @status: The vbus status + * + * The udc driver calls it when it wants to connect or disconnect gadget + * according to vbus status. + * + * This function can be invoked from interrupt context by irq handlers of + * the gadget drivers, however, usb_udc_connect_control() has to run in + * non-atomic context due to the following: + * a. Some of the gadget driver implementations expect the ->pullup + * callback to be invoked in non-atomic context. + * b. usb_gadget_disconnect() acquires udc_lock which is a mutex. + * Hence offload invocation of usb_udc_connect_control() to workqueue. + */ +void usb_udc_vbus_handler(struct usb_gadget *gadget, bool status) +{ + struct usb_udc *udc = gadget->udc; + + if (udc) { + udc->vbus = status; + schedule_work(&udc->vbus_work); + } +} +EXPORT_SYMBOL_GPL(usb_udc_vbus_handler); + +/** + * usb_gadget_udc_reset - notifies the udc core that bus reset occurs + * @gadget: The gadget which bus reset occurs + * @driver: The gadget driver we want to notify + * + * If the udc driver has bus reset handler, it needs to call this when the bus + * reset occurs, it notifies the gadget driver that the bus reset occurs as + * well as updates gadget state. + */ +void usb_gadget_udc_reset(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + driver->reset(gadget); + usb_gadget_set_state(gadget, USB_STATE_DEFAULT); +} +EXPORT_SYMBOL_GPL(usb_gadget_udc_reset); + +/** + * usb_gadget_udc_start_locked - tells usb device controller to start up + * @udc: The UDC to be started + * + * This call is issued by the UDC Class driver when it's about + * to register a gadget driver to the device controller, before + * calling gadget driver's bind() method. + * + * It allows the controller to be powered off until strictly + * necessary to have it powered on. + * + * Returns zero on success, else negative errno. + * + * Caller should acquire connect_lock before invoking this function. + */ +static inline int usb_gadget_udc_start_locked(struct usb_udc *udc) + __must_hold(&udc->connect_lock) +{ + int ret; + + if (udc->started) { + dev_err(&udc->dev, "UDC had already started\n"); + return -EBUSY; + } + + ret = udc->gadget->ops->udc_start(udc->gadget, udc->driver); + if (!ret) + udc->started = true; + + return ret; +} + +/** + * usb_gadget_udc_stop_locked - tells usb device controller we don't need it anymore + * @udc: The UDC to be stopped + * + * This call is issued by the UDC Class driver after calling + * gadget driver's unbind() method. + * + * The details are implementation specific, but it can go as + * far as powering off UDC completely and disable its data + * line pullups. + * + * Caller should acquire connect lock before invoking this function. + */ +static inline void usb_gadget_udc_stop_locked(struct usb_udc *udc) + __must_hold(&udc->connect_lock) +{ + if (!udc->started) { + dev_err(&udc->dev, "UDC had already stopped\n"); + return; + } + + udc->gadget->ops->udc_stop(udc->gadget); + udc->started = false; +} + +/** + * usb_gadget_udc_set_speed - tells usb device controller speed supported by + * current driver + * @udc: The device we want to set maximum speed + * @speed: The maximum speed to allowed to run + * + * This call is issued by the UDC Class driver before calling + * usb_gadget_udc_start() in order to make sure that we don't try to + * connect on speeds the gadget driver doesn't support. + */ +static inline void usb_gadget_udc_set_speed(struct usb_udc *udc, + enum usb_device_speed speed) +{ + struct usb_gadget *gadget = udc->gadget; + enum usb_device_speed s; + + if (speed == USB_SPEED_UNKNOWN) + s = gadget->max_speed; + else + s = min(speed, gadget->max_speed); + + if (s == USB_SPEED_SUPER_PLUS && gadget->ops->udc_set_ssp_rate) + gadget->ops->udc_set_ssp_rate(gadget, gadget->max_ssp_rate); + else if (gadget->ops->udc_set_speed) + gadget->ops->udc_set_speed(gadget, s); +} + +/** + * usb_gadget_enable_async_callbacks - tell usb device controller to enable asynchronous callbacks + * @udc: The UDC which should enable async callbacks + * + * This routine is used when binding gadget drivers. It undoes the effect + * of usb_gadget_disable_async_callbacks(); the UDC driver should enable IRQs + * (if necessary) and resume issuing callbacks. + * + * This routine will always be called in process context. + */ +static inline void usb_gadget_enable_async_callbacks(struct usb_udc *udc) +{ + struct usb_gadget *gadget = udc->gadget; + + if (gadget->ops->udc_async_callbacks) + gadget->ops->udc_async_callbacks(gadget, true); +} + +/** + * usb_gadget_disable_async_callbacks - tell usb device controller to disable asynchronous callbacks + * @udc: The UDC which should disable async callbacks + * + * This routine is used when unbinding gadget drivers. It prevents a race: + * The UDC driver doesn't know when the gadget driver's ->unbind callback + * runs, so unless it is told to disable asynchronous callbacks, it might + * issue a callback (such as ->disconnect) after the unbind has completed. + * + * After this function runs, the UDC driver must suppress all ->suspend, + * ->resume, ->disconnect, ->reset, and ->setup callbacks to the gadget driver + * until async callbacks are again enabled. A simple-minded but effective + * way to accomplish this is to tell the UDC hardware not to generate any + * more IRQs. + * + * Request completion callbacks must still be issued. However, it's okay + * to defer them until the request is cancelled, since the pull-up will be + * turned off during the time period when async callbacks are disabled. + * + * This routine will always be called in process context. + */ +static inline void usb_gadget_disable_async_callbacks(struct usb_udc *udc) +{ + struct usb_gadget *gadget = udc->gadget; + + if (gadget->ops->udc_async_callbacks) + gadget->ops->udc_async_callbacks(gadget, false); +} + +/** + * usb_udc_release - release the usb_udc struct + * @dev: the dev member within usb_udc + * + * This is called by driver's core in order to free memory once the last + * reference is released. + */ +static void usb_udc_release(struct device *dev) +{ + struct usb_udc *udc; + + udc = container_of(dev, struct usb_udc, dev); + dev_dbg(dev, "releasing '%s'\n", dev_name(dev)); + kfree(udc); +} + +static const struct attribute_group *usb_udc_attr_groups[]; + +static void usb_udc_nop_release(struct device *dev) +{ + dev_vdbg(dev, "%s\n", __func__); +} + +/** + * usb_initialize_gadget - initialize a gadget and its embedded struct device + * @parent: the parent device to this udc. Usually the controller driver's + * device. + * @gadget: the gadget to be initialized. + * @release: a gadget release function. + */ +void usb_initialize_gadget(struct device *parent, struct usb_gadget *gadget, + void (*release)(struct device *dev)) +{ + INIT_WORK(&gadget->work, usb_gadget_state_work); + gadget->dev.parent = parent; + + if (release) + gadget->dev.release = release; + else + gadget->dev.release = usb_udc_nop_release; + + device_initialize(&gadget->dev); + gadget->dev.bus = &gadget_bus_type; +} +EXPORT_SYMBOL_GPL(usb_initialize_gadget); + +/** + * usb_add_gadget - adds a new gadget to the udc class driver list + * @gadget: the gadget to be added to the list. + * + * Returns zero on success, negative errno otherwise. + * Does not do a final usb_put_gadget() if an error occurs. + */ +int usb_add_gadget(struct usb_gadget *gadget) +{ + struct usb_udc *udc; + int ret = -ENOMEM; + + udc = kzalloc(sizeof(*udc), GFP_KERNEL); + if (!udc) + goto error; + + device_initialize(&udc->dev); + udc->dev.release = usb_udc_release; + udc->dev.class = udc_class; + udc->dev.groups = usb_udc_attr_groups; + udc->dev.parent = gadget->dev.parent; + ret = dev_set_name(&udc->dev, "%s", + kobject_name(&gadget->dev.parent->kobj)); + if (ret) + goto err_put_udc; + + udc->gadget = gadget; + gadget->udc = udc; + mutex_init(&udc->connect_lock); + + udc->started = false; + + mutex_lock(&udc_lock); + list_add_tail(&udc->list, &udc_list); + mutex_unlock(&udc_lock); + INIT_WORK(&udc->vbus_work, vbus_event_work); + + ret = device_add(&udc->dev); + if (ret) + goto err_unlist_udc; + + usb_gadget_set_state(gadget, USB_STATE_NOTATTACHED); + udc->vbus = true; + + ret = ida_alloc(&gadget_id_numbers, GFP_KERNEL); + if (ret < 0) + goto err_del_udc; + gadget->id_number = ret; + dev_set_name(&gadget->dev, "gadget.%d", ret); + + ret = device_add(&gadget->dev); + if (ret) + goto err_free_id; + + return 0; + + err_free_id: + ida_free(&gadget_id_numbers, gadget->id_number); + + err_del_udc: + flush_work(&gadget->work); + device_del(&udc->dev); + + err_unlist_udc: + mutex_lock(&udc_lock); + list_del(&udc->list); + mutex_unlock(&udc_lock); + + err_put_udc: + put_device(&udc->dev); + + error: + return ret; +} +EXPORT_SYMBOL_GPL(usb_add_gadget); + +/** + * usb_add_gadget_udc_release - adds a new gadget to the udc class driver list + * @parent: the parent device to this udc. Usually the controller driver's + * device. + * @gadget: the gadget to be added to the list. + * @release: a gadget release function. + * + * Returns zero on success, negative errno otherwise. + * Calls the gadget release function in the latter case. + */ +int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget, + void (*release)(struct device *dev)) +{ + int ret; + + usb_initialize_gadget(parent, gadget, release); + ret = usb_add_gadget(gadget); + if (ret) + usb_put_gadget(gadget); + return ret; +} +EXPORT_SYMBOL_GPL(usb_add_gadget_udc_release); + +/** + * usb_get_gadget_udc_name - get the name of the first UDC controller + * This functions returns the name of the first UDC controller in the system. + * Please note that this interface is usefull only for legacy drivers which + * assume that there is only one UDC controller in the system and they need to + * get its name before initialization. There is no guarantee that the UDC + * of the returned name will be still available, when gadget driver registers + * itself. + * + * Returns pointer to string with UDC controller name on success, NULL + * otherwise. Caller should kfree() returned string. + */ +char *usb_get_gadget_udc_name(void) +{ + struct usb_udc *udc; + char *name = NULL; + + /* For now we take the first available UDC */ + mutex_lock(&udc_lock); + list_for_each_entry(udc, &udc_list, list) { + if (!udc->driver) { + name = kstrdup(udc->gadget->name, GFP_KERNEL); + break; + } + } + mutex_unlock(&udc_lock); + return name; +} +EXPORT_SYMBOL_GPL(usb_get_gadget_udc_name); + +/** + * usb_add_gadget_udc - adds a new gadget to the udc class driver list + * @parent: the parent device to this udc. Usually the controller + * driver's device. + * @gadget: the gadget to be added to the list + * + * Returns zero on success, negative errno otherwise. + */ +int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget) +{ + return usb_add_gadget_udc_release(parent, gadget, NULL); +} +EXPORT_SYMBOL_GPL(usb_add_gadget_udc); + +/** + * usb_del_gadget - deletes a gadget and unregisters its udc + * @gadget: the gadget to be deleted. + * + * This will unbind @gadget, if it is bound. + * It will not do a final usb_put_gadget(). + */ +void usb_del_gadget(struct usb_gadget *gadget) +{ + struct usb_udc *udc = gadget->udc; + + if (!udc) + return; + + dev_vdbg(gadget->dev.parent, "unregistering gadget\n"); + + mutex_lock(&udc_lock); + list_del(&udc->list); + mutex_unlock(&udc_lock); + + kobject_uevent(&udc->dev.kobj, KOBJ_REMOVE); + flush_work(&gadget->work); + device_del(&gadget->dev); + ida_free(&gadget_id_numbers, gadget->id_number); + cancel_work_sync(&udc->vbus_work); + device_unregister(&udc->dev); +} +EXPORT_SYMBOL_GPL(usb_del_gadget); + +/** + * usb_del_gadget_udc - unregisters a gadget + * @gadget: the gadget to be unregistered. + * + * Calls usb_del_gadget() and does a final usb_put_gadget(). + */ +void usb_del_gadget_udc(struct usb_gadget *gadget) +{ + usb_del_gadget(gadget); + usb_put_gadget(gadget); +} +EXPORT_SYMBOL_GPL(usb_del_gadget_udc); + +/* ------------------------------------------------------------------------- */ + +static int gadget_match_driver(struct device *dev, struct device_driver *drv) +{ + struct usb_gadget *gadget = dev_to_usb_gadget(dev); + struct usb_udc *udc = gadget->udc; + struct usb_gadget_driver *driver = container_of(drv, + struct usb_gadget_driver, driver); + + /* If the driver specifies a udc_name, it must match the UDC's name */ + if (driver->udc_name && + strcmp(driver->udc_name, dev_name(&udc->dev)) != 0) + return 0; + + /* If the driver is already bound to a gadget, it doesn't match */ + if (driver->is_bound) + return 0; + + /* Otherwise any gadget driver matches any UDC */ + return 1; +} + +static int gadget_bind_driver(struct device *dev) +{ + struct usb_gadget *gadget = dev_to_usb_gadget(dev); + struct usb_udc *udc = gadget->udc; + struct usb_gadget_driver *driver = container_of(dev->driver, + struct usb_gadget_driver, driver); + int ret = 0; + + mutex_lock(&udc_lock); + if (driver->is_bound) { + mutex_unlock(&udc_lock); + return -ENXIO; /* Driver binds to only one gadget */ + } + driver->is_bound = true; + udc->driver = driver; + mutex_unlock(&udc_lock); + + dev_dbg(&udc->dev, "binding gadget driver [%s]\n", driver->function); + + usb_gadget_udc_set_speed(udc, driver->max_speed); + + ret = driver->bind(udc->gadget, driver); + if (ret) + goto err_bind; + + mutex_lock(&udc->connect_lock); + ret = usb_gadget_udc_start_locked(udc); + if (ret) { + mutex_unlock(&udc->connect_lock); + goto err_start; + } + usb_gadget_enable_async_callbacks(udc); + udc->allow_connect = true; + usb_udc_connect_control_locked(udc); + mutex_unlock(&udc->connect_lock); + + kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE); + return 0; + + err_start: + driver->unbind(udc->gadget); + + err_bind: + if (ret != -EISNAM) + dev_err(&udc->dev, "failed to start %s: %d\n", + driver->function, ret); + + mutex_lock(&udc_lock); + udc->driver = NULL; + driver->is_bound = false; + mutex_unlock(&udc_lock); + + return ret; +} + +static void gadget_unbind_driver(struct device *dev) +{ + struct usb_gadget *gadget = dev_to_usb_gadget(dev); + struct usb_udc *udc = gadget->udc; + struct usb_gadget_driver *driver = udc->driver; + + dev_dbg(&udc->dev, "unbinding gadget driver [%s]\n", driver->function); + + udc->allow_connect = false; + cancel_work_sync(&udc->vbus_work); + mutex_lock(&udc->connect_lock); + usb_gadget_disconnect_locked(gadget); + usb_gadget_disable_async_callbacks(udc); + if (gadget->irq) + synchronize_irq(gadget->irq); + mutex_unlock(&udc->connect_lock); + + udc->driver->unbind(gadget); + + mutex_lock(&udc->connect_lock); + usb_gadget_udc_stop_locked(udc); + mutex_unlock(&udc->connect_lock); + + mutex_lock(&udc_lock); + driver->is_bound = false; + udc->driver = NULL; + mutex_unlock(&udc_lock); + + kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE); +} + +/* ------------------------------------------------------------------------- */ + +int usb_gadget_register_driver_owner(struct usb_gadget_driver *driver, + struct module *owner, const char *mod_name) +{ + int ret; + + if (!driver || !driver->bind || !driver->setup) + return -EINVAL; + + driver->driver.bus = &gadget_bus_type; + driver->driver.owner = owner; + driver->driver.mod_name = mod_name; + ret = driver_register(&driver->driver); + if (ret) { + pr_warn("%s: driver registration failed: %d\n", + driver->function, ret); + return ret; + } + + mutex_lock(&udc_lock); + if (!driver->is_bound) { + if (driver->match_existing_only) { + pr_warn("%s: couldn't find an available UDC or it's busy\n", + driver->function); + ret = -EBUSY; + } else { + pr_info("%s: couldn't find an available UDC\n", + driver->function); + ret = 0; + } + } + mutex_unlock(&udc_lock); + + if (ret) + driver_unregister(&driver->driver); + return ret; +} +EXPORT_SYMBOL_GPL(usb_gadget_register_driver_owner); + +int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) +{ + if (!driver || !driver->unbind) + return -EINVAL; + + driver_unregister(&driver->driver); + return 0; +} +EXPORT_SYMBOL_GPL(usb_gadget_unregister_driver); + +/* ------------------------------------------------------------------------- */ + +static ssize_t srp_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t n) +{ + struct usb_udc *udc = container_of(dev, struct usb_udc, dev); + + if (sysfs_streq(buf, "1")) + usb_gadget_wakeup(udc->gadget); + + return n; +} +static DEVICE_ATTR_WO(srp); + +static ssize_t soft_connect_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t n) +{ + struct usb_udc *udc = container_of(dev, struct usb_udc, dev); + ssize_t ret; + + device_lock(&udc->gadget->dev); + if (!udc->driver) { + dev_err(dev, "soft-connect without a gadget driver\n"); + ret = -EOPNOTSUPP; + goto out; + } + + if (sysfs_streq(buf, "connect")) { + mutex_lock(&udc->connect_lock); + usb_gadget_udc_start_locked(udc); + usb_gadget_connect_locked(udc->gadget); + mutex_unlock(&udc->connect_lock); + } else if (sysfs_streq(buf, "disconnect")) { + mutex_lock(&udc->connect_lock); + usb_gadget_disconnect_locked(udc->gadget); + usb_gadget_udc_stop_locked(udc); + mutex_unlock(&udc->connect_lock); + } else { + dev_err(dev, "unsupported command '%s'\n", buf); + ret = -EINVAL; + goto out; + } + + ret = n; +out: + device_unlock(&udc->gadget->dev); + return ret; +} +static DEVICE_ATTR_WO(soft_connect); + +static ssize_t state_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_udc *udc = container_of(dev, struct usb_udc, dev); + struct usb_gadget *gadget = udc->gadget; + + return sprintf(buf, "%s\n", usb_state_string(gadget->state)); +} +static DEVICE_ATTR_RO(state); + +static ssize_t function_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_udc *udc = container_of(dev, struct usb_udc, dev); + struct usb_gadget_driver *drv; + int rc = 0; + + mutex_lock(&udc_lock); + drv = udc->driver; + if (drv && drv->function) + rc = scnprintf(buf, PAGE_SIZE, "%s\n", drv->function); + mutex_unlock(&udc_lock); + return rc; +} +static DEVICE_ATTR_RO(function); + +#define USB_UDC_SPEED_ATTR(name, param) \ +ssize_t name##_show(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct usb_udc *udc = container_of(dev, struct usb_udc, dev); \ + return scnprintf(buf, PAGE_SIZE, "%s\n", \ + usb_speed_string(udc->gadget->param)); \ +} \ +static DEVICE_ATTR_RO(name) + +static USB_UDC_SPEED_ATTR(current_speed, speed); +static USB_UDC_SPEED_ATTR(maximum_speed, max_speed); + +#define USB_UDC_ATTR(name) \ +ssize_t name##_show(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct usb_udc *udc = container_of(dev, struct usb_udc, dev); \ + struct usb_gadget *gadget = udc->gadget; \ + \ + return scnprintf(buf, PAGE_SIZE, "%d\n", gadget->name); \ +} \ +static DEVICE_ATTR_RO(name) + +static USB_UDC_ATTR(is_otg); +static USB_UDC_ATTR(is_a_peripheral); +static USB_UDC_ATTR(b_hnp_enable); +static USB_UDC_ATTR(a_hnp_support); +static USB_UDC_ATTR(a_alt_hnp_support); +static USB_UDC_ATTR(is_selfpowered); + +static struct attribute *usb_udc_attrs[] = { + &dev_attr_srp.attr, + &dev_attr_soft_connect.attr, + &dev_attr_state.attr, + &dev_attr_function.attr, + &dev_attr_current_speed.attr, + &dev_attr_maximum_speed.attr, + + &dev_attr_is_otg.attr, + &dev_attr_is_a_peripheral.attr, + &dev_attr_b_hnp_enable.attr, + &dev_attr_a_hnp_support.attr, + &dev_attr_a_alt_hnp_support.attr, + &dev_attr_is_selfpowered.attr, + NULL, +}; + +static const struct attribute_group usb_udc_attr_group = { + .attrs = usb_udc_attrs, +}; + +static const struct attribute_group *usb_udc_attr_groups[] = { + &usb_udc_attr_group, + NULL, +}; + +static int usb_udc_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + struct usb_udc *udc = container_of(dev, struct usb_udc, dev); + int ret; + + ret = add_uevent_var(env, "USB_UDC_NAME=%s", udc->gadget->name); + if (ret) { + dev_err(dev, "failed to add uevent USB_UDC_NAME\n"); + return ret; + } + + mutex_lock(&udc_lock); + if (udc->driver) + ret = add_uevent_var(env, "USB_UDC_DRIVER=%s", + udc->driver->function); + mutex_unlock(&udc_lock); + if (ret) { + dev_err(dev, "failed to add uevent USB_UDC_DRIVER\n"); + return ret; + } + + return 0; +} + +static struct bus_type gadget_bus_type = { + .name = "gadget", + .probe = gadget_bind_driver, + .remove = gadget_unbind_driver, + .match = gadget_match_driver, +}; + +static int __init usb_udc_init(void) +{ + int rc; + + udc_class = class_create(THIS_MODULE, "udc"); + if (IS_ERR(udc_class)) { + pr_err("failed to create udc class --> %ld\n", + PTR_ERR(udc_class)); + return PTR_ERR(udc_class); + } + + udc_class->dev_uevent = usb_udc_uevent; + + rc = bus_register(&gadget_bus_type); + if (rc) + class_destroy(udc_class); + return rc; +} +subsys_initcall(usb_udc_init); + +static void __exit usb_udc_exit(void) +{ + bus_unregister(&gadget_bus_type); + class_destroy(udc_class); +} +module_exit(usb_udc_exit); + +MODULE_DESCRIPTION("UDC Framework"); +MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c new file mode 100644 index 000000000..899ac9f9c --- /dev/null +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -0,0 +1,2909 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dummy_hcd.c -- Dummy/Loopback USB host and device emulator driver. + * + * Maintainer: Alan Stern <stern@rowland.harvard.edu> + * + * Copyright (C) 2003 David Brownell + * Copyright (C) 2003-2005 Alan Stern + */ + + +/* + * This exposes a device side "USB gadget" API, driven by requests to a + * Linux-USB host controller driver. USB traffic is simulated; there's + * no need for USB hardware. Use this with two other drivers: + * + * - Gadget driver, responding to requests (device); + * - Host-side device driver, as already familiar in Linux. + * + * Having this all in one kernel can help some stages of development, + * bypassing some hardware (and driver) issues. UML could help too. + * + * Note: The emulation does not include isochronous transfers! + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/usb.h> +#include <linux/usb/gadget.h> +#include <linux/usb/hcd.h> +#include <linux/scatterlist.h> + +#include <asm/byteorder.h> +#include <linux/io.h> +#include <asm/irq.h> +#include <asm/unaligned.h> + +#define DRIVER_DESC "USB Host+Gadget Emulator" +#define DRIVER_VERSION "02 May 2005" + +#define POWER_BUDGET 500 /* in mA; use 8 for low-power port testing */ +#define POWER_BUDGET_3 900 /* in mA */ + +static const char driver_name[] = "dummy_hcd"; +static const char driver_desc[] = "USB Host+Gadget Emulator"; + +static const char gadget_name[] = "dummy_udc"; + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("David Brownell"); +MODULE_LICENSE("GPL"); + +struct dummy_hcd_module_parameters { + bool is_super_speed; + bool is_high_speed; + unsigned int num; +}; + +static struct dummy_hcd_module_parameters mod_data = { + .is_super_speed = false, + .is_high_speed = true, + .num = 1, +}; +module_param_named(is_super_speed, mod_data.is_super_speed, bool, S_IRUGO); +MODULE_PARM_DESC(is_super_speed, "true to simulate SuperSpeed connection"); +module_param_named(is_high_speed, mod_data.is_high_speed, bool, S_IRUGO); +MODULE_PARM_DESC(is_high_speed, "true to simulate HighSpeed connection"); +module_param_named(num, mod_data.num, uint, S_IRUGO); +MODULE_PARM_DESC(num, "number of emulated controllers"); +/*-------------------------------------------------------------------------*/ + +/* gadget side driver data structres */ +struct dummy_ep { + struct list_head queue; + unsigned long last_io; /* jiffies timestamp */ + struct usb_gadget *gadget; + const struct usb_endpoint_descriptor *desc; + struct usb_ep ep; + unsigned halted:1; + unsigned wedged:1; + unsigned already_seen:1; + unsigned setup_stage:1; + unsigned stream_en:1; +}; + +struct dummy_request { + struct list_head queue; /* ep's requests */ + struct usb_request req; +}; + +static inline struct dummy_ep *usb_ep_to_dummy_ep(struct usb_ep *_ep) +{ + return container_of(_ep, struct dummy_ep, ep); +} + +static inline struct dummy_request *usb_request_to_dummy_request + (struct usb_request *_req) +{ + return container_of(_req, struct dummy_request, req); +} + +/*-------------------------------------------------------------------------*/ + +/* + * Every device has ep0 for control requests, plus up to 30 more endpoints, + * in one of two types: + * + * - Configurable: direction (in/out), type (bulk, iso, etc), and endpoint + * number can be changed. Names like "ep-a" are used for this type. + * + * - Fixed Function: in other cases. some characteristics may be mutable; + * that'd be hardware-specific. Names like "ep12out-bulk" are used. + * + * Gadget drivers are responsible for not setting up conflicting endpoint + * configurations, illegal or unsupported packet lengths, and so on. + */ + +static const char ep0name[] = "ep0"; + +static const struct { + const char *name; + const struct usb_ep_caps caps; +} ep_info[] = { +#define EP_INFO(_name, _caps) \ + { \ + .name = _name, \ + .caps = _caps, \ + } + +/* we don't provide isochronous endpoints since we don't support them */ +#define TYPE_BULK_OR_INT (USB_EP_CAPS_TYPE_BULK | USB_EP_CAPS_TYPE_INT) + + /* everyone has ep0 */ + EP_INFO(ep0name, + USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, USB_EP_CAPS_DIR_ALL)), + /* act like a pxa250: fifteen fixed function endpoints */ + EP_INFO("ep1in-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep2out-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), +/* + EP_INFO("ep3in-iso", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep4out-iso", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_OUT)), +*/ + EP_INFO("ep5in-int", + USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep6in-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep7out-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), +/* + EP_INFO("ep8in-iso", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep9out-iso", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_OUT)), +*/ + EP_INFO("ep10in-int", + USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep11in-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep12out-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), +/* + EP_INFO("ep13in-iso", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep14out-iso", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_OUT)), +*/ + EP_INFO("ep15in-int", + USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)), + + /* or like sa1100: two fixed function endpoints */ + EP_INFO("ep1out-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep2in-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), + + /* and now some generic EPs so we have enough in multi config */ + EP_INFO("ep-aout", + USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep-bin", + USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep-cout", + USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep-dout", + USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep-ein", + USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep-fout", + USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep-gin", + USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep-hout", + USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep-iout", + USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep-jin", + USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep-kout", + USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep-lin", + USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep-mout", + USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), + +#undef EP_INFO +}; + +#define DUMMY_ENDPOINTS ARRAY_SIZE(ep_info) + +/*-------------------------------------------------------------------------*/ + +#define FIFO_SIZE 64 + +struct urbp { + struct urb *urb; + struct list_head urbp_list; + struct sg_mapping_iter miter; + u32 miter_started; +}; + + +enum dummy_rh_state { + DUMMY_RH_RESET, + DUMMY_RH_SUSPENDED, + DUMMY_RH_RUNNING +}; + +struct dummy_hcd { + struct dummy *dum; + enum dummy_rh_state rh_state; + struct timer_list timer; + u32 port_status; + u32 old_status; + unsigned long re_timeout; + + struct usb_device *udev; + struct list_head urbp_list; + struct urbp *next_frame_urbp; + + u32 stream_en_ep; + u8 num_stream[30 / 2]; + + unsigned active:1; + unsigned old_active:1; + unsigned resuming:1; +}; + +struct dummy { + spinlock_t lock; + + /* + * DEVICE/GADGET side support + */ + struct dummy_ep ep[DUMMY_ENDPOINTS]; + int address; + int callback_usage; + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + struct dummy_request fifo_req; + u8 fifo_buf[FIFO_SIZE]; + u16 devstatus; + unsigned ints_enabled:1; + unsigned udc_suspended:1; + unsigned pullup:1; + + /* + * HOST side support + */ + struct dummy_hcd *hs_hcd; + struct dummy_hcd *ss_hcd; +}; + +static inline struct dummy_hcd *hcd_to_dummy_hcd(struct usb_hcd *hcd) +{ + return (struct dummy_hcd *) (hcd->hcd_priv); +} + +static inline struct usb_hcd *dummy_hcd_to_hcd(struct dummy_hcd *dum) +{ + return container_of((void *) dum, struct usb_hcd, hcd_priv); +} + +static inline struct device *dummy_dev(struct dummy_hcd *dum) +{ + return dummy_hcd_to_hcd(dum)->self.controller; +} + +static inline struct device *udc_dev(struct dummy *dum) +{ + return dum->gadget.dev.parent; +} + +static inline struct dummy *ep_to_dummy(struct dummy_ep *ep) +{ + return container_of(ep->gadget, struct dummy, gadget); +} + +static inline struct dummy_hcd *gadget_to_dummy_hcd(struct usb_gadget *gadget) +{ + struct dummy *dum = container_of(gadget, struct dummy, gadget); + if (dum->gadget.speed == USB_SPEED_SUPER) + return dum->ss_hcd; + else + return dum->hs_hcd; +} + +static inline struct dummy *gadget_dev_to_dummy(struct device *dev) +{ + return container_of(dev, struct dummy, gadget.dev); +} + +/*-------------------------------------------------------------------------*/ + +/* DEVICE/GADGET SIDE UTILITY ROUTINES */ + +/* called with spinlock held */ +static void nuke(struct dummy *dum, struct dummy_ep *ep) +{ + while (!list_empty(&ep->queue)) { + struct dummy_request *req; + + req = list_entry(ep->queue.next, struct dummy_request, queue); + list_del_init(&req->queue); + req->req.status = -ESHUTDOWN; + + spin_unlock(&dum->lock); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&dum->lock); + } +} + +/* caller must hold lock */ +static void stop_activity(struct dummy *dum) +{ + int i; + + /* prevent any more requests */ + dum->address = 0; + + /* The timer is left running so that outstanding URBs can fail */ + + /* nuke any pending requests first, so driver i/o is quiesced */ + for (i = 0; i < DUMMY_ENDPOINTS; ++i) + nuke(dum, &dum->ep[i]); + + /* driver now does any non-usb quiescing necessary */ +} + +/** + * set_link_state_by_speed() - Sets the current state of the link according to + * the hcd speed + * @dum_hcd: pointer to the dummy_hcd structure to update the link state for + * + * This function updates the port_status according to the link state and the + * speed of the hcd. + */ +static void set_link_state_by_speed(struct dummy_hcd *dum_hcd) +{ + struct dummy *dum = dum_hcd->dum; + + if (dummy_hcd_to_hcd(dum_hcd)->speed == HCD_USB3) { + if ((dum_hcd->port_status & USB_SS_PORT_STAT_POWER) == 0) { + dum_hcd->port_status = 0; + } else if (!dum->pullup || dum->udc_suspended) { + /* UDC suspend must cause a disconnect */ + dum_hcd->port_status &= ~(USB_PORT_STAT_CONNECTION | + USB_PORT_STAT_ENABLE); + if ((dum_hcd->old_status & + USB_PORT_STAT_CONNECTION) != 0) + dum_hcd->port_status |= + (USB_PORT_STAT_C_CONNECTION << 16); + } else { + /* device is connected and not suspended */ + dum_hcd->port_status |= (USB_PORT_STAT_CONNECTION | + USB_PORT_STAT_SPEED_5GBPS) ; + if ((dum_hcd->old_status & + USB_PORT_STAT_CONNECTION) == 0) + dum_hcd->port_status |= + (USB_PORT_STAT_C_CONNECTION << 16); + if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) && + (dum_hcd->port_status & + USB_PORT_STAT_LINK_STATE) == USB_SS_PORT_LS_U0 && + dum_hcd->rh_state != DUMMY_RH_SUSPENDED) + dum_hcd->active = 1; + } + } else { + if ((dum_hcd->port_status & USB_PORT_STAT_POWER) == 0) { + dum_hcd->port_status = 0; + } else if (!dum->pullup || dum->udc_suspended) { + /* UDC suspend must cause a disconnect */ + dum_hcd->port_status &= ~(USB_PORT_STAT_CONNECTION | + USB_PORT_STAT_ENABLE | + USB_PORT_STAT_LOW_SPEED | + USB_PORT_STAT_HIGH_SPEED | + USB_PORT_STAT_SUSPEND); + if ((dum_hcd->old_status & + USB_PORT_STAT_CONNECTION) != 0) + dum_hcd->port_status |= + (USB_PORT_STAT_C_CONNECTION << 16); + } else { + dum_hcd->port_status |= USB_PORT_STAT_CONNECTION; + if ((dum_hcd->old_status & + USB_PORT_STAT_CONNECTION) == 0) + dum_hcd->port_status |= + (USB_PORT_STAT_C_CONNECTION << 16); + if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) == 0) + dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND; + else if ((dum_hcd->port_status & + USB_PORT_STAT_SUSPEND) == 0 && + dum_hcd->rh_state != DUMMY_RH_SUSPENDED) + dum_hcd->active = 1; + } + } +} + +/* caller must hold lock */ +static void set_link_state(struct dummy_hcd *dum_hcd) + __must_hold(&dum->lock) +{ + struct dummy *dum = dum_hcd->dum; + unsigned int power_bit; + + dum_hcd->active = 0; + if (dum->pullup) + if ((dummy_hcd_to_hcd(dum_hcd)->speed == HCD_USB3 && + dum->gadget.speed != USB_SPEED_SUPER) || + (dummy_hcd_to_hcd(dum_hcd)->speed != HCD_USB3 && + dum->gadget.speed == USB_SPEED_SUPER)) + return; + + set_link_state_by_speed(dum_hcd); + power_bit = (dummy_hcd_to_hcd(dum_hcd)->speed == HCD_USB3 ? + USB_SS_PORT_STAT_POWER : USB_PORT_STAT_POWER); + + if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) == 0 || + dum_hcd->active) + dum_hcd->resuming = 0; + + /* Currently !connected or in reset */ + if ((dum_hcd->port_status & power_bit) == 0 || + (dum_hcd->port_status & USB_PORT_STAT_RESET) != 0) { + unsigned int disconnect = power_bit & + dum_hcd->old_status & (~dum_hcd->port_status); + unsigned int reset = USB_PORT_STAT_RESET & + (~dum_hcd->old_status) & dum_hcd->port_status; + + /* Report reset and disconnect events to the driver */ + if (dum->ints_enabled && (disconnect || reset)) { + stop_activity(dum); + ++dum->callback_usage; + spin_unlock(&dum->lock); + if (reset) + usb_gadget_udc_reset(&dum->gadget, dum->driver); + else + dum->driver->disconnect(&dum->gadget); + spin_lock(&dum->lock); + --dum->callback_usage; + } + } else if (dum_hcd->active != dum_hcd->old_active && + dum->ints_enabled) { + ++dum->callback_usage; + spin_unlock(&dum->lock); + if (dum_hcd->old_active && dum->driver->suspend) + dum->driver->suspend(&dum->gadget); + else if (!dum_hcd->old_active && dum->driver->resume) + dum->driver->resume(&dum->gadget); + spin_lock(&dum->lock); + --dum->callback_usage; + } + + dum_hcd->old_status = dum_hcd->port_status; + dum_hcd->old_active = dum_hcd->active; +} + +/*-------------------------------------------------------------------------*/ + +/* DEVICE/GADGET SIDE DRIVER + * + * This only tracks gadget state. All the work is done when the host + * side tries some (emulated) i/o operation. Real device controller + * drivers would do real i/o using dma, fifos, irqs, timers, etc. + */ + +#define is_enabled(dum) \ + (dum->port_status & USB_PORT_STAT_ENABLE) + +static int dummy_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct dummy *dum; + struct dummy_hcd *dum_hcd; + struct dummy_ep *ep; + unsigned max; + int retval; + + ep = usb_ep_to_dummy_ep(_ep); + if (!_ep || !desc || ep->desc || _ep->name == ep0name + || desc->bDescriptorType != USB_DT_ENDPOINT) + return -EINVAL; + dum = ep_to_dummy(ep); + if (!dum->driver) + return -ESHUTDOWN; + + dum_hcd = gadget_to_dummy_hcd(&dum->gadget); + if (!is_enabled(dum_hcd)) + return -ESHUTDOWN; + + /* + * For HS/FS devices only bits 0..10 of the wMaxPacketSize represent the + * maximum packet size. + * For SS devices the wMaxPacketSize is limited by 1024. + */ + max = usb_endpoint_maxp(desc); + + /* drivers must not request bad settings, since lower levels + * (hardware or its drivers) may not check. some endpoints + * can't do iso, many have maxpacket limitations, etc. + * + * since this "hardware" driver is here to help debugging, we + * have some extra sanity checks. (there could be more though, + * especially for "ep9out" style fixed function ones.) + */ + retval = -EINVAL; + switch (usb_endpoint_type(desc)) { + case USB_ENDPOINT_XFER_BULK: + if (strstr(ep->ep.name, "-iso") + || strstr(ep->ep.name, "-int")) { + goto done; + } + switch (dum->gadget.speed) { + case USB_SPEED_SUPER: + if (max == 1024) + break; + goto done; + case USB_SPEED_HIGH: + if (max == 512) + break; + goto done; + case USB_SPEED_FULL: + if (max == 8 || max == 16 || max == 32 || max == 64) + /* we'll fake any legal size */ + break; + /* save a return statement */ + fallthrough; + default: + goto done; + } + break; + case USB_ENDPOINT_XFER_INT: + if (strstr(ep->ep.name, "-iso")) /* bulk is ok */ + goto done; + /* real hardware might not handle all packet sizes */ + switch (dum->gadget.speed) { + case USB_SPEED_SUPER: + case USB_SPEED_HIGH: + if (max <= 1024) + break; + /* save a return statement */ + fallthrough; + case USB_SPEED_FULL: + if (max <= 64) + break; + /* save a return statement */ + fallthrough; + default: + if (max <= 8) + break; + goto done; + } + break; + case USB_ENDPOINT_XFER_ISOC: + if (strstr(ep->ep.name, "-bulk") + || strstr(ep->ep.name, "-int")) + goto done; + /* real hardware might not handle all packet sizes */ + switch (dum->gadget.speed) { + case USB_SPEED_SUPER: + case USB_SPEED_HIGH: + if (max <= 1024) + break; + /* save a return statement */ + fallthrough; + case USB_SPEED_FULL: + if (max <= 1023) + break; + /* save a return statement */ + fallthrough; + default: + goto done; + } + break; + default: + /* few chips support control except on ep0 */ + goto done; + } + + _ep->maxpacket = max; + if (usb_ss_max_streams(_ep->comp_desc)) { + if (!usb_endpoint_xfer_bulk(desc)) { + dev_err(udc_dev(dum), "Can't enable stream support on " + "non-bulk ep %s\n", _ep->name); + return -EINVAL; + } + ep->stream_en = 1; + } + ep->desc = desc; + + dev_dbg(udc_dev(dum), "enabled %s (ep%d%s-%s) maxpacket %d stream %s\n", + _ep->name, + desc->bEndpointAddress & 0x0f, + (desc->bEndpointAddress & USB_DIR_IN) ? "in" : "out", + usb_ep_type_string(usb_endpoint_type(desc)), + max, ep->stream_en ? "enabled" : "disabled"); + + /* at this point real hardware should be NAKing transfers + * to that endpoint, until a buffer is queued to it. + */ + ep->halted = ep->wedged = 0; + retval = 0; +done: + return retval; +} + +static int dummy_disable(struct usb_ep *_ep) +{ + struct dummy_ep *ep; + struct dummy *dum; + unsigned long flags; + + ep = usb_ep_to_dummy_ep(_ep); + if (!_ep || !ep->desc || _ep->name == ep0name) + return -EINVAL; + dum = ep_to_dummy(ep); + + spin_lock_irqsave(&dum->lock, flags); + ep->desc = NULL; + ep->stream_en = 0; + nuke(dum, ep); + spin_unlock_irqrestore(&dum->lock, flags); + + dev_dbg(udc_dev(dum), "disabled %s\n", _ep->name); + return 0; +} + +static struct usb_request *dummy_alloc_request(struct usb_ep *_ep, + gfp_t mem_flags) +{ + struct dummy_request *req; + + if (!_ep) + return NULL; + + req = kzalloc(sizeof(*req), mem_flags); + if (!req) + return NULL; + INIT_LIST_HEAD(&req->queue); + return &req->req; +} + +static void dummy_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct dummy_request *req; + + if (!_ep || !_req) { + WARN_ON(1); + return; + } + + req = usb_request_to_dummy_request(_req); + WARN_ON(!list_empty(&req->queue)); + kfree(req); +} + +static void fifo_complete(struct usb_ep *ep, struct usb_request *req) +{ +} + +static int dummy_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t mem_flags) +{ + struct dummy_ep *ep; + struct dummy_request *req; + struct dummy *dum; + struct dummy_hcd *dum_hcd; + unsigned long flags; + + req = usb_request_to_dummy_request(_req); + if (!_req || !list_empty(&req->queue) || !_req->complete) + return -EINVAL; + + ep = usb_ep_to_dummy_ep(_ep); + if (!_ep || (!ep->desc && _ep->name != ep0name)) + return -EINVAL; + + dum = ep_to_dummy(ep); + dum_hcd = gadget_to_dummy_hcd(&dum->gadget); + if (!dum->driver || !is_enabled(dum_hcd)) + return -ESHUTDOWN; + +#if 0 + dev_dbg(udc_dev(dum), "ep %p queue req %p to %s, len %d buf %p\n", + ep, _req, _ep->name, _req->length, _req->buf); +#endif + _req->status = -EINPROGRESS; + _req->actual = 0; + spin_lock_irqsave(&dum->lock, flags); + + /* implement an emulated single-request FIFO */ + if (ep->desc && (ep->desc->bEndpointAddress & USB_DIR_IN) && + list_empty(&dum->fifo_req.queue) && + list_empty(&ep->queue) && + _req->length <= FIFO_SIZE) { + req = &dum->fifo_req; + req->req = *_req; + req->req.buf = dum->fifo_buf; + memcpy(dum->fifo_buf, _req->buf, _req->length); + req->req.context = dum; + req->req.complete = fifo_complete; + + list_add_tail(&req->queue, &ep->queue); + spin_unlock(&dum->lock); + _req->actual = _req->length; + _req->status = 0; + usb_gadget_giveback_request(_ep, _req); + spin_lock(&dum->lock); + } else + list_add_tail(&req->queue, &ep->queue); + spin_unlock_irqrestore(&dum->lock, flags); + + /* real hardware would likely enable transfers here, in case + * it'd been left NAKing. + */ + return 0; +} + +static int dummy_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct dummy_ep *ep; + struct dummy *dum; + int retval = -EINVAL; + unsigned long flags; + struct dummy_request *req = NULL, *iter; + + if (!_ep || !_req) + return retval; + ep = usb_ep_to_dummy_ep(_ep); + dum = ep_to_dummy(ep); + + if (!dum->driver) + return -ESHUTDOWN; + + local_irq_save(flags); + spin_lock(&dum->lock); + list_for_each_entry(iter, &ep->queue, queue) { + if (&iter->req != _req) + continue; + list_del_init(&iter->queue); + _req->status = -ECONNRESET; + req = iter; + retval = 0; + break; + } + spin_unlock(&dum->lock); + + if (retval == 0) { + dev_dbg(udc_dev(dum), + "dequeued req %p from %s, len %d buf %p\n", + req, _ep->name, _req->length, _req->buf); + usb_gadget_giveback_request(_ep, _req); + } + local_irq_restore(flags); + return retval; +} + +static int +dummy_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged) +{ + struct dummy_ep *ep; + struct dummy *dum; + + if (!_ep) + return -EINVAL; + ep = usb_ep_to_dummy_ep(_ep); + dum = ep_to_dummy(ep); + if (!dum->driver) + return -ESHUTDOWN; + if (!value) + ep->halted = ep->wedged = 0; + else if (ep->desc && (ep->desc->bEndpointAddress & USB_DIR_IN) && + !list_empty(&ep->queue)) + return -EAGAIN; + else { + ep->halted = 1; + if (wedged) + ep->wedged = 1; + } + /* FIXME clear emulated data toggle too */ + return 0; +} + +static int +dummy_set_halt(struct usb_ep *_ep, int value) +{ + return dummy_set_halt_and_wedge(_ep, value, 0); +} + +static int dummy_set_wedge(struct usb_ep *_ep) +{ + if (!_ep || _ep->name == ep0name) + return -EINVAL; + return dummy_set_halt_and_wedge(_ep, 1, 1); +} + +static const struct usb_ep_ops dummy_ep_ops = { + .enable = dummy_enable, + .disable = dummy_disable, + + .alloc_request = dummy_alloc_request, + .free_request = dummy_free_request, + + .queue = dummy_queue, + .dequeue = dummy_dequeue, + + .set_halt = dummy_set_halt, + .set_wedge = dummy_set_wedge, +}; + +/*-------------------------------------------------------------------------*/ + +/* there are both host and device side versions of this call ... */ +static int dummy_g_get_frame(struct usb_gadget *_gadget) +{ + struct timespec64 ts64; + + ktime_get_ts64(&ts64); + return ts64.tv_nsec / NSEC_PER_MSEC; +} + +static int dummy_wakeup(struct usb_gadget *_gadget) +{ + struct dummy_hcd *dum_hcd; + + dum_hcd = gadget_to_dummy_hcd(_gadget); + if (!(dum_hcd->dum->devstatus & ((1 << USB_DEVICE_B_HNP_ENABLE) + | (1 << USB_DEVICE_REMOTE_WAKEUP)))) + return -EINVAL; + if ((dum_hcd->port_status & USB_PORT_STAT_CONNECTION) == 0) + return -ENOLINK; + if ((dum_hcd->port_status & USB_PORT_STAT_SUSPEND) == 0 && + dum_hcd->rh_state != DUMMY_RH_SUSPENDED) + return -EIO; + + /* FIXME: What if the root hub is suspended but the port isn't? */ + + /* hub notices our request, issues downstream resume, etc */ + dum_hcd->resuming = 1; + dum_hcd->re_timeout = jiffies + msecs_to_jiffies(20); + mod_timer(&dummy_hcd_to_hcd(dum_hcd)->rh_timer, dum_hcd->re_timeout); + return 0; +} + +static int dummy_set_selfpowered(struct usb_gadget *_gadget, int value) +{ + struct dummy *dum; + + _gadget->is_selfpowered = (value != 0); + dum = gadget_to_dummy_hcd(_gadget)->dum; + if (value) + dum->devstatus |= (1 << USB_DEVICE_SELF_POWERED); + else + dum->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED); + return 0; +} + +static void dummy_udc_update_ep0(struct dummy *dum) +{ + if (dum->gadget.speed == USB_SPEED_SUPER) + dum->ep[0].ep.maxpacket = 9; + else + dum->ep[0].ep.maxpacket = 64; +} + +static int dummy_pullup(struct usb_gadget *_gadget, int value) +{ + struct dummy_hcd *dum_hcd; + struct dummy *dum; + unsigned long flags; + + dum = gadget_dev_to_dummy(&_gadget->dev); + dum_hcd = gadget_to_dummy_hcd(_gadget); + + spin_lock_irqsave(&dum->lock, flags); + dum->pullup = (value != 0); + set_link_state(dum_hcd); + if (value == 0) { + /* + * Emulate synchronize_irq(): wait for callbacks to finish. + * This seems to be the best place to emulate the call to + * synchronize_irq() that's in usb_gadget_remove_driver(). + * Doing it in dummy_udc_stop() would be too late since it + * is called after the unbind callback and unbind shouldn't + * be invoked until all the other callbacks are finished. + */ + while (dum->callback_usage > 0) { + spin_unlock_irqrestore(&dum->lock, flags); + usleep_range(1000, 2000); + spin_lock_irqsave(&dum->lock, flags); + } + } + spin_unlock_irqrestore(&dum->lock, flags); + + usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd)); + return 0; +} + +static void dummy_udc_set_speed(struct usb_gadget *_gadget, + enum usb_device_speed speed) +{ + struct dummy *dum; + + dum = gadget_dev_to_dummy(&_gadget->dev); + dum->gadget.speed = speed; + dummy_udc_update_ep0(dum); +} + +static void dummy_udc_async_callbacks(struct usb_gadget *_gadget, bool enable) +{ + struct dummy *dum = gadget_dev_to_dummy(&_gadget->dev); + + spin_lock_irq(&dum->lock); + dum->ints_enabled = enable; + spin_unlock_irq(&dum->lock); +} + +static int dummy_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver); +static int dummy_udc_stop(struct usb_gadget *g); + +static const struct usb_gadget_ops dummy_ops = { + .get_frame = dummy_g_get_frame, + .wakeup = dummy_wakeup, + .set_selfpowered = dummy_set_selfpowered, + .pullup = dummy_pullup, + .udc_start = dummy_udc_start, + .udc_stop = dummy_udc_stop, + .udc_set_speed = dummy_udc_set_speed, + .udc_async_callbacks = dummy_udc_async_callbacks, +}; + +/*-------------------------------------------------------------------------*/ + +/* "function" sysfs attribute */ +static ssize_t function_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct dummy *dum = gadget_dev_to_dummy(dev); + + if (!dum->driver || !dum->driver->function) + return 0; + return scnprintf(buf, PAGE_SIZE, "%s\n", dum->driver->function); +} +static DEVICE_ATTR_RO(function); + +/*-------------------------------------------------------------------------*/ + +/* + * Driver registration/unregistration. + * + * This is basically hardware-specific; there's usually only one real USB + * device (not host) controller since that's how USB devices are intended + * to work. So most implementations of these api calls will rely on the + * fact that only one driver will ever bind to the hardware. But curious + * hardware can be built with discrete components, so the gadget API doesn't + * require that assumption. + * + * For this emulator, it might be convenient to create a usb device + * for each driver that registers: just add to a big root hub. + */ + +static int dummy_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) +{ + struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(g); + struct dummy *dum = dum_hcd->dum; + + switch (g->speed) { + /* All the speeds we support */ + case USB_SPEED_LOW: + case USB_SPEED_FULL: + case USB_SPEED_HIGH: + case USB_SPEED_SUPER: + break; + default: + dev_err(dummy_dev(dum_hcd), "Unsupported driver max speed %d\n", + driver->max_speed); + return -EINVAL; + } + + /* + * DEVICE side init ... the layer above hardware, which + * can't enumerate without help from the driver we're binding. + */ + + spin_lock_irq(&dum->lock); + dum->devstatus = 0; + dum->driver = driver; + spin_unlock_irq(&dum->lock); + + return 0; +} + +static int dummy_udc_stop(struct usb_gadget *g) +{ + struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(g); + struct dummy *dum = dum_hcd->dum; + + spin_lock_irq(&dum->lock); + dum->ints_enabled = 0; + stop_activity(dum); + dum->driver = NULL; + spin_unlock_irq(&dum->lock); + + return 0; +} + +#undef is_enabled + +/* The gadget structure is stored inside the hcd structure and will be + * released along with it. */ +static void init_dummy_udc_hw(struct dummy *dum) +{ + int i; + + INIT_LIST_HEAD(&dum->gadget.ep_list); + for (i = 0; i < DUMMY_ENDPOINTS; i++) { + struct dummy_ep *ep = &dum->ep[i]; + + if (!ep_info[i].name) + break; + ep->ep.name = ep_info[i].name; + ep->ep.caps = ep_info[i].caps; + ep->ep.ops = &dummy_ep_ops; + list_add_tail(&ep->ep.ep_list, &dum->gadget.ep_list); + ep->halted = ep->wedged = ep->already_seen = + ep->setup_stage = 0; + usb_ep_set_maxpacket_limit(&ep->ep, ~0); + ep->ep.max_streams = 16; + ep->last_io = jiffies; + ep->gadget = &dum->gadget; + ep->desc = NULL; + INIT_LIST_HEAD(&ep->queue); + } + + dum->gadget.ep0 = &dum->ep[0].ep; + list_del_init(&dum->ep[0].ep.ep_list); + INIT_LIST_HEAD(&dum->fifo_req.queue); + +#ifdef CONFIG_USB_OTG + dum->gadget.is_otg = 1; +#endif +} + +static int dummy_udc_probe(struct platform_device *pdev) +{ + struct dummy *dum; + int rc; + + dum = *((void **)dev_get_platdata(&pdev->dev)); + /* Clear usb_gadget region for new registration to udc-core */ + memzero_explicit(&dum->gadget, sizeof(struct usb_gadget)); + dum->gadget.name = gadget_name; + dum->gadget.ops = &dummy_ops; + if (mod_data.is_super_speed) + dum->gadget.max_speed = USB_SPEED_SUPER; + else if (mod_data.is_high_speed) + dum->gadget.max_speed = USB_SPEED_HIGH; + else + dum->gadget.max_speed = USB_SPEED_FULL; + + dum->gadget.dev.parent = &pdev->dev; + init_dummy_udc_hw(dum); + + rc = usb_add_gadget_udc(&pdev->dev, &dum->gadget); + if (rc < 0) + goto err_udc; + + rc = device_create_file(&dum->gadget.dev, &dev_attr_function); + if (rc < 0) + goto err_dev; + platform_set_drvdata(pdev, dum); + return rc; + +err_dev: + usb_del_gadget_udc(&dum->gadget); +err_udc: + return rc; +} + +static int dummy_udc_remove(struct platform_device *pdev) +{ + struct dummy *dum = platform_get_drvdata(pdev); + + device_remove_file(&dum->gadget.dev, &dev_attr_function); + usb_del_gadget_udc(&dum->gadget); + return 0; +} + +static void dummy_udc_pm(struct dummy *dum, struct dummy_hcd *dum_hcd, + int suspend) +{ + spin_lock_irq(&dum->lock); + dum->udc_suspended = suspend; + set_link_state(dum_hcd); + spin_unlock_irq(&dum->lock); +} + +static int dummy_udc_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct dummy *dum = platform_get_drvdata(pdev); + struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(&dum->gadget); + + dev_dbg(&pdev->dev, "%s\n", __func__); + dummy_udc_pm(dum, dum_hcd, 1); + usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd)); + return 0; +} + +static int dummy_udc_resume(struct platform_device *pdev) +{ + struct dummy *dum = platform_get_drvdata(pdev); + struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(&dum->gadget); + + dev_dbg(&pdev->dev, "%s\n", __func__); + dummy_udc_pm(dum, dum_hcd, 0); + usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd)); + return 0; +} + +static struct platform_driver dummy_udc_driver = { + .probe = dummy_udc_probe, + .remove = dummy_udc_remove, + .suspend = dummy_udc_suspend, + .resume = dummy_udc_resume, + .driver = { + .name = gadget_name, + }, +}; + +/*-------------------------------------------------------------------------*/ + +static unsigned int dummy_get_ep_idx(const struct usb_endpoint_descriptor *desc) +{ + unsigned int index; + + index = usb_endpoint_num(desc) << 1; + if (usb_endpoint_dir_in(desc)) + index |= 1; + return index; +} + +/* HOST SIDE DRIVER + * + * this uses the hcd framework to hook up to host side drivers. + * its root hub will only have one device, otherwise it acts like + * a normal host controller. + * + * when urbs are queued, they're just stuck on a list that we + * scan in a timer callback. that callback connects writes from + * the host with reads from the device, and so on, based on the + * usb 2.0 rules. + */ + +static int dummy_ep_stream_en(struct dummy_hcd *dum_hcd, struct urb *urb) +{ + const struct usb_endpoint_descriptor *desc = &urb->ep->desc; + u32 index; + + if (!usb_endpoint_xfer_bulk(desc)) + return 0; + + index = dummy_get_ep_idx(desc); + return (1 << index) & dum_hcd->stream_en_ep; +} + +/* + * The max stream number is saved as a nibble so for the 30 possible endpoints + * we only 15 bytes of memory. Therefore we are limited to max 16 streams (0 + * means we use only 1 stream). The maximum according to the spec is 16bit so + * if the 16 stream limit is about to go, the array size should be incremented + * to 30 elements of type u16. + */ +static int get_max_streams_for_pipe(struct dummy_hcd *dum_hcd, + unsigned int pipe) +{ + int max_streams; + + max_streams = dum_hcd->num_stream[usb_pipeendpoint(pipe)]; + if (usb_pipeout(pipe)) + max_streams >>= 4; + else + max_streams &= 0xf; + max_streams++; + return max_streams; +} + +static void set_max_streams_for_pipe(struct dummy_hcd *dum_hcd, + unsigned int pipe, unsigned int streams) +{ + int max_streams; + + streams--; + max_streams = dum_hcd->num_stream[usb_pipeendpoint(pipe)]; + if (usb_pipeout(pipe)) { + streams <<= 4; + max_streams &= 0xf; + } else { + max_streams &= 0xf0; + } + max_streams |= streams; + dum_hcd->num_stream[usb_pipeendpoint(pipe)] = max_streams; +} + +static int dummy_validate_stream(struct dummy_hcd *dum_hcd, struct urb *urb) +{ + unsigned int max_streams; + int enabled; + + enabled = dummy_ep_stream_en(dum_hcd, urb); + if (!urb->stream_id) { + if (enabled) + return -EINVAL; + return 0; + } + if (!enabled) + return -EINVAL; + + max_streams = get_max_streams_for_pipe(dum_hcd, + usb_pipeendpoint(urb->pipe)); + if (urb->stream_id > max_streams) { + dev_err(dummy_dev(dum_hcd), "Stream id %d is out of range.\n", + urb->stream_id); + BUG(); + return -EINVAL; + } + return 0; +} + +static int dummy_urb_enqueue( + struct usb_hcd *hcd, + struct urb *urb, + gfp_t mem_flags +) { + struct dummy_hcd *dum_hcd; + struct urbp *urbp; + unsigned long flags; + int rc; + + urbp = kmalloc(sizeof *urbp, mem_flags); + if (!urbp) + return -ENOMEM; + urbp->urb = urb; + urbp->miter_started = 0; + + dum_hcd = hcd_to_dummy_hcd(hcd); + spin_lock_irqsave(&dum_hcd->dum->lock, flags); + + rc = dummy_validate_stream(dum_hcd, urb); + if (rc) { + kfree(urbp); + goto done; + } + + rc = usb_hcd_link_urb_to_ep(hcd, urb); + if (rc) { + kfree(urbp); + goto done; + } + + if (!dum_hcd->udev) { + dum_hcd->udev = urb->dev; + usb_get_dev(dum_hcd->udev); + } else if (unlikely(dum_hcd->udev != urb->dev)) + dev_err(dummy_dev(dum_hcd), "usb_device address has changed!\n"); + + list_add_tail(&urbp->urbp_list, &dum_hcd->urbp_list); + urb->hcpriv = urbp; + if (!dum_hcd->next_frame_urbp) + dum_hcd->next_frame_urbp = urbp; + if (usb_pipetype(urb->pipe) == PIPE_CONTROL) + urb->error_count = 1; /* mark as a new urb */ + + /* kick the scheduler, it'll do the rest */ + if (!timer_pending(&dum_hcd->timer)) + mod_timer(&dum_hcd->timer, jiffies + 1); + + done: + spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); + return rc; +} + +static int dummy_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) +{ + struct dummy_hcd *dum_hcd; + unsigned long flags; + int rc; + + /* giveback happens automatically in timer callback, + * so make sure the callback happens */ + dum_hcd = hcd_to_dummy_hcd(hcd); + spin_lock_irqsave(&dum_hcd->dum->lock, flags); + + rc = usb_hcd_check_unlink_urb(hcd, urb, status); + if (!rc && dum_hcd->rh_state != DUMMY_RH_RUNNING && + !list_empty(&dum_hcd->urbp_list)) + mod_timer(&dum_hcd->timer, jiffies); + + spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); + return rc; +} + +static int dummy_perform_transfer(struct urb *urb, struct dummy_request *req, + u32 len) +{ + void *ubuf, *rbuf; + struct urbp *urbp = urb->hcpriv; + int to_host; + struct sg_mapping_iter *miter = &urbp->miter; + u32 trans = 0; + u32 this_sg; + bool next_sg; + + to_host = usb_urb_dir_in(urb); + rbuf = req->req.buf + req->req.actual; + + if (!urb->num_sgs) { + ubuf = urb->transfer_buffer + urb->actual_length; + if (to_host) + memcpy(ubuf, rbuf, len); + else + memcpy(rbuf, ubuf, len); + return len; + } + + if (!urbp->miter_started) { + u32 flags = SG_MITER_ATOMIC; + + if (to_host) + flags |= SG_MITER_TO_SG; + else + flags |= SG_MITER_FROM_SG; + + sg_miter_start(miter, urb->sg, urb->num_sgs, flags); + urbp->miter_started = 1; + } + next_sg = sg_miter_next(miter); + if (next_sg == false) { + WARN_ON_ONCE(1); + return -EINVAL; + } + do { + ubuf = miter->addr; + this_sg = min_t(u32, len, miter->length); + miter->consumed = this_sg; + trans += this_sg; + + if (to_host) + memcpy(ubuf, rbuf, this_sg); + else + memcpy(rbuf, ubuf, this_sg); + len -= this_sg; + + if (!len) + break; + next_sg = sg_miter_next(miter); + if (next_sg == false) { + WARN_ON_ONCE(1); + return -EINVAL; + } + + rbuf += this_sg; + } while (1); + + sg_miter_stop(miter); + return trans; +} + +/* transfer up to a frame's worth; caller must own lock */ +static int transfer(struct dummy_hcd *dum_hcd, struct urb *urb, + struct dummy_ep *ep, int limit, int *status) +{ + struct dummy *dum = dum_hcd->dum; + struct dummy_request *req; + int sent = 0; + +top: + /* if there's no request queued, the device is NAKing; return */ + list_for_each_entry(req, &ep->queue, queue) { + unsigned host_len, dev_len, len; + int is_short, to_host; + int rescan = 0; + + if (dummy_ep_stream_en(dum_hcd, urb)) { + if ((urb->stream_id != req->req.stream_id)) + continue; + } + + /* 1..N packets of ep->ep.maxpacket each ... the last one + * may be short (including zero length). + * + * writer can send a zlp explicitly (length 0) or implicitly + * (length mod maxpacket zero, and 'zero' flag); they always + * terminate reads. + */ + host_len = urb->transfer_buffer_length - urb->actual_length; + dev_len = req->req.length - req->req.actual; + len = min(host_len, dev_len); + + /* FIXME update emulated data toggle too */ + + to_host = usb_urb_dir_in(urb); + if (unlikely(len == 0)) + is_short = 1; + else { + /* not enough bandwidth left? */ + if (limit < ep->ep.maxpacket && limit < len) + break; + len = min_t(unsigned, len, limit); + if (len == 0) + break; + + /* send multiple of maxpacket first, then remainder */ + if (len >= ep->ep.maxpacket) { + is_short = 0; + if (len % ep->ep.maxpacket) + rescan = 1; + len -= len % ep->ep.maxpacket; + } else { + is_short = 1; + } + + len = dummy_perform_transfer(urb, req, len); + + ep->last_io = jiffies; + if ((int)len < 0) { + req->req.status = len; + } else { + limit -= len; + sent += len; + urb->actual_length += len; + req->req.actual += len; + } + } + + /* short packets terminate, maybe with overflow/underflow. + * it's only really an error to write too much. + * + * partially filling a buffer optionally blocks queue advances + * (so completion handlers can clean up the queue) but we don't + * need to emulate such data-in-flight. + */ + if (is_short) { + if (host_len == dev_len) { + req->req.status = 0; + *status = 0; + } else if (to_host) { + req->req.status = 0; + if (dev_len > host_len) + *status = -EOVERFLOW; + else + *status = 0; + } else { + *status = 0; + if (host_len > dev_len) + req->req.status = -EOVERFLOW; + else + req->req.status = 0; + } + + /* + * many requests terminate without a short packet. + * send a zlp if demanded by flags. + */ + } else { + if (req->req.length == req->req.actual) { + if (req->req.zero && to_host) + rescan = 1; + else + req->req.status = 0; + } + if (urb->transfer_buffer_length == urb->actual_length) { + if (urb->transfer_flags & URB_ZERO_PACKET && + !to_host) + rescan = 1; + else + *status = 0; + } + } + + /* device side completion --> continuable */ + if (req->req.status != -EINPROGRESS) { + list_del_init(&req->queue); + + spin_unlock(&dum->lock); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&dum->lock); + + /* requests might have been unlinked... */ + rescan = 1; + } + + /* host side completion --> terminate */ + if (*status != -EINPROGRESS) + break; + + /* rescan to continue with any other queued i/o */ + if (rescan) + goto top; + } + return sent; +} + +static int periodic_bytes(struct dummy *dum, struct dummy_ep *ep) +{ + int limit = ep->ep.maxpacket; + + if (dum->gadget.speed == USB_SPEED_HIGH) { + int tmp; + + /* high bandwidth mode */ + tmp = usb_endpoint_maxp_mult(ep->desc); + tmp *= 8 /* applies to entire frame */; + limit += limit * tmp; + } + if (dum->gadget.speed == USB_SPEED_SUPER) { + switch (usb_endpoint_type(ep->desc)) { + case USB_ENDPOINT_XFER_ISOC: + /* Sec. 4.4.8.2 USB3.0 Spec */ + limit = 3 * 16 * 1024 * 8; + break; + case USB_ENDPOINT_XFER_INT: + /* Sec. 4.4.7.2 USB3.0 Spec */ + limit = 3 * 1024 * 8; + break; + case USB_ENDPOINT_XFER_BULK: + default: + break; + } + } + return limit; +} + +#define is_active(dum_hcd) ((dum_hcd->port_status & \ + (USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE | \ + USB_PORT_STAT_SUSPEND)) \ + == (USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE)) + +static struct dummy_ep *find_endpoint(struct dummy *dum, u8 address) +{ + int i; + + if (!is_active((dum->gadget.speed == USB_SPEED_SUPER ? + dum->ss_hcd : dum->hs_hcd))) + return NULL; + if (!dum->ints_enabled) + return NULL; + if ((address & ~USB_DIR_IN) == 0) + return &dum->ep[0]; + for (i = 1; i < DUMMY_ENDPOINTS; i++) { + struct dummy_ep *ep = &dum->ep[i]; + + if (!ep->desc) + continue; + if (ep->desc->bEndpointAddress == address) + return ep; + } + return NULL; +} + +#undef is_active + +#define Dev_Request (USB_TYPE_STANDARD | USB_RECIP_DEVICE) +#define Dev_InRequest (Dev_Request | USB_DIR_IN) +#define Intf_Request (USB_TYPE_STANDARD | USB_RECIP_INTERFACE) +#define Intf_InRequest (Intf_Request | USB_DIR_IN) +#define Ep_Request (USB_TYPE_STANDARD | USB_RECIP_ENDPOINT) +#define Ep_InRequest (Ep_Request | USB_DIR_IN) + + +/** + * handle_control_request() - handles all control transfers + * @dum_hcd: pointer to dummy (the_controller) + * @urb: the urb request to handle + * @setup: pointer to the setup data for a USB device control + * request + * @status: pointer to request handling status + * + * Return 0 - if the request was handled + * 1 - if the request wasn't handles + * error code on error + */ +static int handle_control_request(struct dummy_hcd *dum_hcd, struct urb *urb, + struct usb_ctrlrequest *setup, + int *status) +{ + struct dummy_ep *ep2; + struct dummy *dum = dum_hcd->dum; + int ret_val = 1; + unsigned w_index; + unsigned w_value; + + w_index = le16_to_cpu(setup->wIndex); + w_value = le16_to_cpu(setup->wValue); + switch (setup->bRequest) { + case USB_REQ_SET_ADDRESS: + if (setup->bRequestType != Dev_Request) + break; + dum->address = w_value; + *status = 0; + dev_dbg(udc_dev(dum), "set_address = %d\n", + w_value); + ret_val = 0; + break; + case USB_REQ_SET_FEATURE: + if (setup->bRequestType == Dev_Request) { + ret_val = 0; + switch (w_value) { + case USB_DEVICE_REMOTE_WAKEUP: + break; + case USB_DEVICE_B_HNP_ENABLE: + dum->gadget.b_hnp_enable = 1; + break; + case USB_DEVICE_A_HNP_SUPPORT: + dum->gadget.a_hnp_support = 1; + break; + case USB_DEVICE_A_ALT_HNP_SUPPORT: + dum->gadget.a_alt_hnp_support = 1; + break; + case USB_DEVICE_U1_ENABLE: + if (dummy_hcd_to_hcd(dum_hcd)->speed == + HCD_USB3) + w_value = USB_DEV_STAT_U1_ENABLED; + else + ret_val = -EOPNOTSUPP; + break; + case USB_DEVICE_U2_ENABLE: + if (dummy_hcd_to_hcd(dum_hcd)->speed == + HCD_USB3) + w_value = USB_DEV_STAT_U2_ENABLED; + else + ret_val = -EOPNOTSUPP; + break; + case USB_DEVICE_LTM_ENABLE: + if (dummy_hcd_to_hcd(dum_hcd)->speed == + HCD_USB3) + w_value = USB_DEV_STAT_LTM_ENABLED; + else + ret_val = -EOPNOTSUPP; + break; + default: + ret_val = -EOPNOTSUPP; + } + if (ret_val == 0) { + dum->devstatus |= (1 << w_value); + *status = 0; + } + } else if (setup->bRequestType == Ep_Request) { + /* endpoint halt */ + ep2 = find_endpoint(dum, w_index); + if (!ep2 || ep2->ep.name == ep0name) { + ret_val = -EOPNOTSUPP; + break; + } + ep2->halted = 1; + ret_val = 0; + *status = 0; + } + break; + case USB_REQ_CLEAR_FEATURE: + if (setup->bRequestType == Dev_Request) { + ret_val = 0; + switch (w_value) { + case USB_DEVICE_REMOTE_WAKEUP: + w_value = USB_DEVICE_REMOTE_WAKEUP; + break; + case USB_DEVICE_U1_ENABLE: + if (dummy_hcd_to_hcd(dum_hcd)->speed == + HCD_USB3) + w_value = USB_DEV_STAT_U1_ENABLED; + else + ret_val = -EOPNOTSUPP; + break; + case USB_DEVICE_U2_ENABLE: + if (dummy_hcd_to_hcd(dum_hcd)->speed == + HCD_USB3) + w_value = USB_DEV_STAT_U2_ENABLED; + else + ret_val = -EOPNOTSUPP; + break; + case USB_DEVICE_LTM_ENABLE: + if (dummy_hcd_to_hcd(dum_hcd)->speed == + HCD_USB3) + w_value = USB_DEV_STAT_LTM_ENABLED; + else + ret_val = -EOPNOTSUPP; + break; + default: + ret_val = -EOPNOTSUPP; + break; + } + if (ret_val == 0) { + dum->devstatus &= ~(1 << w_value); + *status = 0; + } + } else if (setup->bRequestType == Ep_Request) { + /* endpoint halt */ + ep2 = find_endpoint(dum, w_index); + if (!ep2) { + ret_val = -EOPNOTSUPP; + break; + } + if (!ep2->wedged) + ep2->halted = 0; + ret_val = 0; + *status = 0; + } + break; + case USB_REQ_GET_STATUS: + if (setup->bRequestType == Dev_InRequest + || setup->bRequestType == Intf_InRequest + || setup->bRequestType == Ep_InRequest) { + char *buf; + /* + * device: remote wakeup, selfpowered + * interface: nothing + * endpoint: halt + */ + buf = (char *)urb->transfer_buffer; + if (urb->transfer_buffer_length > 0) { + if (setup->bRequestType == Ep_InRequest) { + ep2 = find_endpoint(dum, w_index); + if (!ep2) { + ret_val = -EOPNOTSUPP; + break; + } + buf[0] = ep2->halted; + } else if (setup->bRequestType == + Dev_InRequest) { + buf[0] = (u8)dum->devstatus; + } else + buf[0] = 0; + } + if (urb->transfer_buffer_length > 1) + buf[1] = 0; + urb->actual_length = min_t(u32, 2, + urb->transfer_buffer_length); + ret_val = 0; + *status = 0; + } + break; + } + return ret_val; +} + +/* + * Drive both sides of the transfers; looks like irq handlers to both + * drivers except that the callbacks are invoked from soft interrupt + * context. + */ +static void dummy_timer(struct timer_list *t) +{ + struct dummy_hcd *dum_hcd = from_timer(dum_hcd, t, timer); + struct dummy *dum = dum_hcd->dum; + struct urbp *urbp, *tmp; + unsigned long flags; + int limit, total; + int i; + + /* simplistic model for one frame's bandwidth */ + /* FIXME: account for transaction and packet overhead */ + switch (dum->gadget.speed) { + case USB_SPEED_LOW: + total = 8/*bytes*/ * 12/*packets*/; + break; + case USB_SPEED_FULL: + total = 64/*bytes*/ * 19/*packets*/; + break; + case USB_SPEED_HIGH: + total = 512/*bytes*/ * 13/*packets*/ * 8/*uframes*/; + break; + case USB_SPEED_SUPER: + /* Bus speed is 500000 bytes/ms, so use a little less */ + total = 490000; + break; + default: /* Can't happen */ + dev_err(dummy_dev(dum_hcd), "bogus device speed\n"); + total = 0; + break; + } + + /* FIXME if HZ != 1000 this will probably misbehave ... */ + + /* look at each urb queued by the host side driver */ + spin_lock_irqsave(&dum->lock, flags); + + if (!dum_hcd->udev) { + dev_err(dummy_dev(dum_hcd), + "timer fired with no URBs pending?\n"); + spin_unlock_irqrestore(&dum->lock, flags); + return; + } + dum_hcd->next_frame_urbp = NULL; + + for (i = 0; i < DUMMY_ENDPOINTS; i++) { + if (!ep_info[i].name) + break; + dum->ep[i].already_seen = 0; + } + +restart: + list_for_each_entry_safe(urbp, tmp, &dum_hcd->urbp_list, urbp_list) { + struct urb *urb; + struct dummy_request *req; + u8 address; + struct dummy_ep *ep = NULL; + int status = -EINPROGRESS; + + /* stop when we reach URBs queued after the timer interrupt */ + if (urbp == dum_hcd->next_frame_urbp) + break; + + urb = urbp->urb; + if (urb->unlinked) + goto return_urb; + else if (dum_hcd->rh_state != DUMMY_RH_RUNNING) + continue; + + /* Used up this frame's bandwidth? */ + if (total <= 0) + continue; + + /* find the gadget's ep for this request (if configured) */ + address = usb_pipeendpoint (urb->pipe); + if (usb_urb_dir_in(urb)) + address |= USB_DIR_IN; + ep = find_endpoint(dum, address); + if (!ep) { + /* set_configuration() disagreement */ + dev_dbg(dummy_dev(dum_hcd), + "no ep configured for urb %p\n", + urb); + status = -EPROTO; + goto return_urb; + } + + if (ep->already_seen) + continue; + ep->already_seen = 1; + if (ep == &dum->ep[0] && urb->error_count) { + ep->setup_stage = 1; /* a new urb */ + urb->error_count = 0; + } + if (ep->halted && !ep->setup_stage) { + /* NOTE: must not be iso! */ + dev_dbg(dummy_dev(dum_hcd), "ep %s halted, urb %p\n", + ep->ep.name, urb); + status = -EPIPE; + goto return_urb; + } + /* FIXME make sure both ends agree on maxpacket */ + + /* handle control requests */ + if (ep == &dum->ep[0] && ep->setup_stage) { + struct usb_ctrlrequest setup; + int value; + + setup = *(struct usb_ctrlrequest *) urb->setup_packet; + /* paranoia, in case of stale queued data */ + list_for_each_entry(req, &ep->queue, queue) { + list_del_init(&req->queue); + req->req.status = -EOVERFLOW; + dev_dbg(udc_dev(dum), "stale req = %p\n", + req); + + spin_unlock(&dum->lock); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&dum->lock); + ep->already_seen = 0; + goto restart; + } + + /* gadget driver never sees set_address or operations + * on standard feature flags. some hardware doesn't + * even expose them. + */ + ep->last_io = jiffies; + ep->setup_stage = 0; + ep->halted = 0; + + value = handle_control_request(dum_hcd, urb, &setup, + &status); + + /* gadget driver handles all other requests. block + * until setup() returns; no reentrancy issues etc. + */ + if (value > 0) { + ++dum->callback_usage; + spin_unlock(&dum->lock); + value = dum->driver->setup(&dum->gadget, + &setup); + spin_lock(&dum->lock); + --dum->callback_usage; + + if (value >= 0) { + /* no delays (max 64KB data stage) */ + limit = 64*1024; + goto treat_control_like_bulk; + } + /* error, see below */ + } + + if (value < 0) { + if (value != -EOPNOTSUPP) + dev_dbg(udc_dev(dum), + "setup --> %d\n", + value); + status = -EPIPE; + urb->actual_length = 0; + } + + goto return_urb; + } + + /* non-control requests */ + limit = total; + switch (usb_pipetype(urb->pipe)) { + case PIPE_ISOCHRONOUS: + /* + * We don't support isochronous. But if we did, + * here are some of the issues we'd have to face: + * + * Is it urb->interval since the last xfer? + * Use urb->iso_frame_desc[i]. + * Complete whether or not ep has requests queued. + * Report random errors, to debug drivers. + */ + limit = max(limit, periodic_bytes(dum, ep)); + status = -EINVAL; /* fail all xfers */ + break; + + case PIPE_INTERRUPT: + /* FIXME is it urb->interval since the last xfer? + * this almost certainly polls too fast. + */ + limit = max(limit, periodic_bytes(dum, ep)); + fallthrough; + + default: +treat_control_like_bulk: + ep->last_io = jiffies; + total -= transfer(dum_hcd, urb, ep, limit, &status); + break; + } + + /* incomplete transfer? */ + if (status == -EINPROGRESS) + continue; + +return_urb: + list_del(&urbp->urbp_list); + kfree(urbp); + if (ep) + ep->already_seen = ep->setup_stage = 0; + + usb_hcd_unlink_urb_from_ep(dummy_hcd_to_hcd(dum_hcd), urb); + spin_unlock(&dum->lock); + usb_hcd_giveback_urb(dummy_hcd_to_hcd(dum_hcd), urb, status); + spin_lock(&dum->lock); + + goto restart; + } + + if (list_empty(&dum_hcd->urbp_list)) { + usb_put_dev(dum_hcd->udev); + dum_hcd->udev = NULL; + } else if (dum_hcd->rh_state == DUMMY_RH_RUNNING) { + /* want a 1 msec delay here */ + mod_timer(&dum_hcd->timer, jiffies + msecs_to_jiffies(1)); + } + + spin_unlock_irqrestore(&dum->lock, flags); +} + +/*-------------------------------------------------------------------------*/ + +#define PORT_C_MASK \ + ((USB_PORT_STAT_C_CONNECTION \ + | USB_PORT_STAT_C_ENABLE \ + | USB_PORT_STAT_C_SUSPEND \ + | USB_PORT_STAT_C_OVERCURRENT \ + | USB_PORT_STAT_C_RESET) << 16) + +static int dummy_hub_status(struct usb_hcd *hcd, char *buf) +{ + struct dummy_hcd *dum_hcd; + unsigned long flags; + int retval = 0; + + dum_hcd = hcd_to_dummy_hcd(hcd); + + spin_lock_irqsave(&dum_hcd->dum->lock, flags); + if (!HCD_HW_ACCESSIBLE(hcd)) + goto done; + + if (dum_hcd->resuming && time_after_eq(jiffies, dum_hcd->re_timeout)) { + dum_hcd->port_status |= (USB_PORT_STAT_C_SUSPEND << 16); + dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND; + set_link_state(dum_hcd); + } + + if ((dum_hcd->port_status & PORT_C_MASK) != 0) { + *buf = (1 << 1); + dev_dbg(dummy_dev(dum_hcd), "port status 0x%08x has changes\n", + dum_hcd->port_status); + retval = 1; + if (dum_hcd->rh_state == DUMMY_RH_SUSPENDED) + usb_hcd_resume_root_hub(hcd); + } +done: + spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); + return retval; +} + +/* usb 3.0 root hub device descriptor */ +static struct { + struct usb_bos_descriptor bos; + struct usb_ss_cap_descriptor ss_cap; +} __packed usb3_bos_desc = { + + .bos = { + .bLength = USB_DT_BOS_SIZE, + .bDescriptorType = USB_DT_BOS, + .wTotalLength = cpu_to_le16(sizeof(usb3_bos_desc)), + .bNumDeviceCaps = 1, + }, + .ss_cap = { + .bLength = USB_DT_USB_SS_CAP_SIZE, + .bDescriptorType = USB_DT_DEVICE_CAPABILITY, + .bDevCapabilityType = USB_SS_CAP_TYPE, + .wSpeedSupported = cpu_to_le16(USB_5GBPS_OPERATION), + .bFunctionalitySupport = ilog2(USB_5GBPS_OPERATION), + }, +}; + +static inline void +ss_hub_descriptor(struct usb_hub_descriptor *desc) +{ + memset(desc, 0, sizeof *desc); + desc->bDescriptorType = USB_DT_SS_HUB; + desc->bDescLength = 12; + desc->wHubCharacteristics = cpu_to_le16( + HUB_CHAR_INDV_PORT_LPSM | + HUB_CHAR_COMMON_OCPM); + desc->bNbrPorts = 1; + desc->u.ss.bHubHdrDecLat = 0x04; /* Worst case: 0.4 micro sec*/ + desc->u.ss.DeviceRemovable = 0; +} + +static inline void hub_descriptor(struct usb_hub_descriptor *desc) +{ + memset(desc, 0, sizeof *desc); + desc->bDescriptorType = USB_DT_HUB; + desc->bDescLength = 9; + desc->wHubCharacteristics = cpu_to_le16( + HUB_CHAR_INDV_PORT_LPSM | + HUB_CHAR_COMMON_OCPM); + desc->bNbrPorts = 1; + desc->u.hs.DeviceRemovable[0] = 0; + desc->u.hs.DeviceRemovable[1] = 0xff; /* PortPwrCtrlMask */ +} + +static int dummy_hub_control( + struct usb_hcd *hcd, + u16 typeReq, + u16 wValue, + u16 wIndex, + char *buf, + u16 wLength +) { + struct dummy_hcd *dum_hcd; + int retval = 0; + unsigned long flags; + + if (!HCD_HW_ACCESSIBLE(hcd)) + return -ETIMEDOUT; + + dum_hcd = hcd_to_dummy_hcd(hcd); + + spin_lock_irqsave(&dum_hcd->dum->lock, flags); + switch (typeReq) { + case ClearHubFeature: + break; + case ClearPortFeature: + switch (wValue) { + case USB_PORT_FEAT_SUSPEND: + if (hcd->speed == HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "USB_PORT_FEAT_SUSPEND req not " + "supported for USB 3.0 roothub\n"); + goto error; + } + if (dum_hcd->port_status & USB_PORT_STAT_SUSPEND) { + /* 20msec resume signaling */ + dum_hcd->resuming = 1; + dum_hcd->re_timeout = jiffies + + msecs_to_jiffies(20); + } + break; + case USB_PORT_FEAT_POWER: + dev_dbg(dummy_dev(dum_hcd), "power-off\n"); + if (hcd->speed == HCD_USB3) + dum_hcd->port_status &= ~USB_SS_PORT_STAT_POWER; + else + dum_hcd->port_status &= ~USB_PORT_STAT_POWER; + set_link_state(dum_hcd); + break; + case USB_PORT_FEAT_ENABLE: + case USB_PORT_FEAT_C_ENABLE: + case USB_PORT_FEAT_C_SUSPEND: + /* Not allowed for USB-3 */ + if (hcd->speed == HCD_USB3) + goto error; + fallthrough; + case USB_PORT_FEAT_C_CONNECTION: + case USB_PORT_FEAT_C_RESET: + dum_hcd->port_status &= ~(1 << wValue); + set_link_state(dum_hcd); + break; + default: + /* Disallow INDICATOR and C_OVER_CURRENT */ + goto error; + } + break; + case GetHubDescriptor: + if (hcd->speed == HCD_USB3 && + (wLength < USB_DT_SS_HUB_SIZE || + wValue != (USB_DT_SS_HUB << 8))) { + dev_dbg(dummy_dev(dum_hcd), + "Wrong hub descriptor type for " + "USB 3.0 roothub.\n"); + goto error; + } + if (hcd->speed == HCD_USB3) + ss_hub_descriptor((struct usb_hub_descriptor *) buf); + else + hub_descriptor((struct usb_hub_descriptor *) buf); + break; + + case DeviceRequest | USB_REQ_GET_DESCRIPTOR: + if (hcd->speed != HCD_USB3) + goto error; + + if ((wValue >> 8) != USB_DT_BOS) + goto error; + + memcpy(buf, &usb3_bos_desc, sizeof(usb3_bos_desc)); + retval = sizeof(usb3_bos_desc); + break; + + case GetHubStatus: + *(__le32 *) buf = cpu_to_le32(0); + break; + case GetPortStatus: + if (wIndex != 1) + retval = -EPIPE; + + /* whoever resets or resumes must GetPortStatus to + * complete it!! + */ + if (dum_hcd->resuming && + time_after_eq(jiffies, dum_hcd->re_timeout)) { + dum_hcd->port_status |= (USB_PORT_STAT_C_SUSPEND << 16); + dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND; + } + if ((dum_hcd->port_status & USB_PORT_STAT_RESET) != 0 && + time_after_eq(jiffies, dum_hcd->re_timeout)) { + dum_hcd->port_status |= (USB_PORT_STAT_C_RESET << 16); + dum_hcd->port_status &= ~USB_PORT_STAT_RESET; + if (dum_hcd->dum->pullup) { + dum_hcd->port_status |= USB_PORT_STAT_ENABLE; + + if (hcd->speed < HCD_USB3) { + switch (dum_hcd->dum->gadget.speed) { + case USB_SPEED_HIGH: + dum_hcd->port_status |= + USB_PORT_STAT_HIGH_SPEED; + break; + case USB_SPEED_LOW: + dum_hcd->dum->gadget.ep0-> + maxpacket = 8; + dum_hcd->port_status |= + USB_PORT_STAT_LOW_SPEED; + break; + default: + break; + } + } + } + } + set_link_state(dum_hcd); + ((__le16 *) buf)[0] = cpu_to_le16(dum_hcd->port_status); + ((__le16 *) buf)[1] = cpu_to_le16(dum_hcd->port_status >> 16); + break; + case SetHubFeature: + retval = -EPIPE; + break; + case SetPortFeature: + switch (wValue) { + case USB_PORT_FEAT_LINK_STATE: + if (hcd->speed != HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "USB_PORT_FEAT_LINK_STATE req not " + "supported for USB 2.0 roothub\n"); + goto error; + } + /* + * Since this is dummy we don't have an actual link so + * there is nothing to do for the SET_LINK_STATE cmd + */ + break; + case USB_PORT_FEAT_U1_TIMEOUT: + case USB_PORT_FEAT_U2_TIMEOUT: + /* TODO: add suspend/resume support! */ + if (hcd->speed != HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "USB_PORT_FEAT_U1/2_TIMEOUT req not " + "supported for USB 2.0 roothub\n"); + goto error; + } + break; + case USB_PORT_FEAT_SUSPEND: + /* Applicable only for USB2.0 hub */ + if (hcd->speed == HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "USB_PORT_FEAT_SUSPEND req not " + "supported for USB 3.0 roothub\n"); + goto error; + } + if (dum_hcd->active) { + dum_hcd->port_status |= USB_PORT_STAT_SUSPEND; + + /* HNP would happen here; for now we + * assume b_bus_req is always true. + */ + set_link_state(dum_hcd); + if (((1 << USB_DEVICE_B_HNP_ENABLE) + & dum_hcd->dum->devstatus) != 0) + dev_dbg(dummy_dev(dum_hcd), + "no HNP yet!\n"); + } + break; + case USB_PORT_FEAT_POWER: + if (hcd->speed == HCD_USB3) + dum_hcd->port_status |= USB_SS_PORT_STAT_POWER; + else + dum_hcd->port_status |= USB_PORT_STAT_POWER; + set_link_state(dum_hcd); + break; + case USB_PORT_FEAT_BH_PORT_RESET: + /* Applicable only for USB3.0 hub */ + if (hcd->speed != HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "USB_PORT_FEAT_BH_PORT_RESET req not " + "supported for USB 2.0 roothub\n"); + goto error; + } + fallthrough; + case USB_PORT_FEAT_RESET: + if (!(dum_hcd->port_status & USB_PORT_STAT_CONNECTION)) + break; + /* if it's already enabled, disable */ + if (hcd->speed == HCD_USB3) { + dum_hcd->port_status = + (USB_SS_PORT_STAT_POWER | + USB_PORT_STAT_CONNECTION | + USB_PORT_STAT_RESET); + } else { + dum_hcd->port_status &= ~(USB_PORT_STAT_ENABLE + | USB_PORT_STAT_LOW_SPEED + | USB_PORT_STAT_HIGH_SPEED); + dum_hcd->port_status |= USB_PORT_STAT_RESET; + } + /* + * We want to reset device status. All but the + * Self powered feature + */ + dum_hcd->dum->devstatus &= + (1 << USB_DEVICE_SELF_POWERED); + /* + * FIXME USB3.0: what is the correct reset signaling + * interval? Is it still 50msec as for HS? + */ + dum_hcd->re_timeout = jiffies + msecs_to_jiffies(50); + set_link_state(dum_hcd); + break; + case USB_PORT_FEAT_C_CONNECTION: + case USB_PORT_FEAT_C_RESET: + case USB_PORT_FEAT_C_ENABLE: + case USB_PORT_FEAT_C_SUSPEND: + /* Not allowed for USB-3, and ignored for USB-2 */ + if (hcd->speed == HCD_USB3) + goto error; + break; + default: + /* Disallow TEST, INDICATOR, and C_OVER_CURRENT */ + goto error; + } + break; + case GetPortErrorCount: + if (hcd->speed != HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "GetPortErrorCount req not " + "supported for USB 2.0 roothub\n"); + goto error; + } + /* We'll always return 0 since this is a dummy hub */ + *(__le32 *) buf = cpu_to_le32(0); + break; + case SetHubDepth: + if (hcd->speed != HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "SetHubDepth req not supported for " + "USB 2.0 roothub\n"); + goto error; + } + break; + default: + dev_dbg(dummy_dev(dum_hcd), + "hub control req%04x v%04x i%04x l%d\n", + typeReq, wValue, wIndex, wLength); +error: + /* "protocol stall" on error */ + retval = -EPIPE; + } + spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); + + if ((dum_hcd->port_status & PORT_C_MASK) != 0) + usb_hcd_poll_rh_status(hcd); + return retval; +} + +static int dummy_bus_suspend(struct usb_hcd *hcd) +{ + struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); + + dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__); + + spin_lock_irq(&dum_hcd->dum->lock); + dum_hcd->rh_state = DUMMY_RH_SUSPENDED; + set_link_state(dum_hcd); + hcd->state = HC_STATE_SUSPENDED; + spin_unlock_irq(&dum_hcd->dum->lock); + return 0; +} + +static int dummy_bus_resume(struct usb_hcd *hcd) +{ + struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); + int rc = 0; + + dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__); + + spin_lock_irq(&dum_hcd->dum->lock); + if (!HCD_HW_ACCESSIBLE(hcd)) { + rc = -ESHUTDOWN; + } else { + dum_hcd->rh_state = DUMMY_RH_RUNNING; + set_link_state(dum_hcd); + if (!list_empty(&dum_hcd->urbp_list)) + mod_timer(&dum_hcd->timer, jiffies); + hcd->state = HC_STATE_RUNNING; + } + spin_unlock_irq(&dum_hcd->dum->lock); + return rc; +} + +/*-------------------------------------------------------------------------*/ + +static inline ssize_t show_urb(char *buf, size_t size, struct urb *urb) +{ + int ep = usb_pipeendpoint(urb->pipe); + + return scnprintf(buf, size, + "urb/%p %s ep%d%s%s len %d/%d\n", + urb, + ({ char *s; + switch (urb->dev->speed) { + case USB_SPEED_LOW: + s = "ls"; + break; + case USB_SPEED_FULL: + s = "fs"; + break; + case USB_SPEED_HIGH: + s = "hs"; + break; + case USB_SPEED_SUPER: + s = "ss"; + break; + default: + s = "?"; + break; + } s; }), + ep, ep ? (usb_urb_dir_in(urb) ? "in" : "out") : "", + ({ char *s; \ + switch (usb_pipetype(urb->pipe)) { \ + case PIPE_CONTROL: \ + s = ""; \ + break; \ + case PIPE_BULK: \ + s = "-bulk"; \ + break; \ + case PIPE_INTERRUPT: \ + s = "-int"; \ + break; \ + default: \ + s = "-iso"; \ + break; \ + } s; }), + urb->actual_length, urb->transfer_buffer_length); +} + +static ssize_t urbs_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); + struct urbp *urbp; + size_t size = 0; + unsigned long flags; + + spin_lock_irqsave(&dum_hcd->dum->lock, flags); + list_for_each_entry(urbp, &dum_hcd->urbp_list, urbp_list) { + size_t temp; + + temp = show_urb(buf, PAGE_SIZE - size, urbp->urb); + buf += temp; + size += temp; + } + spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); + + return size; +} +static DEVICE_ATTR_RO(urbs); + +static int dummy_start_ss(struct dummy_hcd *dum_hcd) +{ + timer_setup(&dum_hcd->timer, dummy_timer, 0); + dum_hcd->rh_state = DUMMY_RH_RUNNING; + dum_hcd->stream_en_ep = 0; + INIT_LIST_HEAD(&dum_hcd->urbp_list); + dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET_3; + dummy_hcd_to_hcd(dum_hcd)->state = HC_STATE_RUNNING; + dummy_hcd_to_hcd(dum_hcd)->uses_new_polling = 1; +#ifdef CONFIG_USB_OTG + dummy_hcd_to_hcd(dum_hcd)->self.otg_port = 1; +#endif + return 0; + + /* FIXME 'urbs' should be a per-device thing, maybe in usbcore */ + return device_create_file(dummy_dev(dum_hcd), &dev_attr_urbs); +} + +static int dummy_start(struct usb_hcd *hcd) +{ + struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); + + /* + * HOST side init ... we emulate a root hub that'll only ever + * talk to one device (the gadget side). Also appears in sysfs, + * just like more familiar pci-based HCDs. + */ + if (!usb_hcd_is_primary_hcd(hcd)) + return dummy_start_ss(dum_hcd); + + spin_lock_init(&dum_hcd->dum->lock); + timer_setup(&dum_hcd->timer, dummy_timer, 0); + dum_hcd->rh_state = DUMMY_RH_RUNNING; + + INIT_LIST_HEAD(&dum_hcd->urbp_list); + + hcd->power_budget = POWER_BUDGET; + hcd->state = HC_STATE_RUNNING; + hcd->uses_new_polling = 1; + +#ifdef CONFIG_USB_OTG + hcd->self.otg_port = 1; +#endif + + /* FIXME 'urbs' should be a per-device thing, maybe in usbcore */ + return device_create_file(dummy_dev(dum_hcd), &dev_attr_urbs); +} + +static void dummy_stop(struct usb_hcd *hcd) +{ + device_remove_file(dummy_dev(hcd_to_dummy_hcd(hcd)), &dev_attr_urbs); + dev_info(dummy_dev(hcd_to_dummy_hcd(hcd)), "stopped\n"); +} + +/*-------------------------------------------------------------------------*/ + +static int dummy_h_get_frame(struct usb_hcd *hcd) +{ + return dummy_g_get_frame(NULL); +} + +static int dummy_setup(struct usb_hcd *hcd) +{ + struct dummy *dum; + + dum = *((void **)dev_get_platdata(hcd->self.controller)); + hcd->self.sg_tablesize = ~0; + if (usb_hcd_is_primary_hcd(hcd)) { + dum->hs_hcd = hcd_to_dummy_hcd(hcd); + dum->hs_hcd->dum = dum; + /* + * Mark the first roothub as being USB 2.0. + * The USB 3.0 roothub will be registered later by + * dummy_hcd_probe() + */ + hcd->speed = HCD_USB2; + hcd->self.root_hub->speed = USB_SPEED_HIGH; + } else { + dum->ss_hcd = hcd_to_dummy_hcd(hcd); + dum->ss_hcd->dum = dum; + hcd->speed = HCD_USB3; + hcd->self.root_hub->speed = USB_SPEED_SUPER; + } + return 0; +} + +/* Change a group of bulk endpoints to support multiple stream IDs */ +static int dummy_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, + struct usb_host_endpoint **eps, unsigned int num_eps, + unsigned int num_streams, gfp_t mem_flags) +{ + struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); + unsigned long flags; + int max_stream; + int ret_streams = num_streams; + unsigned int index; + unsigned int i; + + if (!num_eps) + return -EINVAL; + + spin_lock_irqsave(&dum_hcd->dum->lock, flags); + for (i = 0; i < num_eps; i++) { + index = dummy_get_ep_idx(&eps[i]->desc); + if ((1 << index) & dum_hcd->stream_en_ep) { + ret_streams = -EINVAL; + goto out; + } + max_stream = usb_ss_max_streams(&eps[i]->ss_ep_comp); + if (!max_stream) { + ret_streams = -EINVAL; + goto out; + } + if (max_stream < ret_streams) { + dev_dbg(dummy_dev(dum_hcd), "Ep 0x%x only supports %u " + "stream IDs.\n", + eps[i]->desc.bEndpointAddress, + max_stream); + ret_streams = max_stream; + } + } + + for (i = 0; i < num_eps; i++) { + index = dummy_get_ep_idx(&eps[i]->desc); + dum_hcd->stream_en_ep |= 1 << index; + set_max_streams_for_pipe(dum_hcd, + usb_endpoint_num(&eps[i]->desc), ret_streams); + } +out: + spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); + return ret_streams; +} + +/* Reverts a group of bulk endpoints back to not using stream IDs. */ +static int dummy_free_streams(struct usb_hcd *hcd, struct usb_device *udev, + struct usb_host_endpoint **eps, unsigned int num_eps, + gfp_t mem_flags) +{ + struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); + unsigned long flags; + int ret; + unsigned int index; + unsigned int i; + + spin_lock_irqsave(&dum_hcd->dum->lock, flags); + for (i = 0; i < num_eps; i++) { + index = dummy_get_ep_idx(&eps[i]->desc); + if (!((1 << index) & dum_hcd->stream_en_ep)) { + ret = -EINVAL; + goto out; + } + } + + for (i = 0; i < num_eps; i++) { + index = dummy_get_ep_idx(&eps[i]->desc); + dum_hcd->stream_en_ep &= ~(1 << index); + set_max_streams_for_pipe(dum_hcd, + usb_endpoint_num(&eps[i]->desc), 0); + } + ret = 0; +out: + spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); + return ret; +} + +static struct hc_driver dummy_hcd = { + .description = (char *) driver_name, + .product_desc = "Dummy host controller", + .hcd_priv_size = sizeof(struct dummy_hcd), + + .reset = dummy_setup, + .start = dummy_start, + .stop = dummy_stop, + + .urb_enqueue = dummy_urb_enqueue, + .urb_dequeue = dummy_urb_dequeue, + + .get_frame_number = dummy_h_get_frame, + + .hub_status_data = dummy_hub_status, + .hub_control = dummy_hub_control, + .bus_suspend = dummy_bus_suspend, + .bus_resume = dummy_bus_resume, + + .alloc_streams = dummy_alloc_streams, + .free_streams = dummy_free_streams, +}; + +static int dummy_hcd_probe(struct platform_device *pdev) +{ + struct dummy *dum; + struct usb_hcd *hs_hcd; + struct usb_hcd *ss_hcd; + int retval; + + dev_info(&pdev->dev, "%s, driver " DRIVER_VERSION "\n", driver_desc); + dum = *((void **)dev_get_platdata(&pdev->dev)); + + if (mod_data.is_super_speed) + dummy_hcd.flags = HCD_USB3 | HCD_SHARED; + else if (mod_data.is_high_speed) + dummy_hcd.flags = HCD_USB2; + else + dummy_hcd.flags = HCD_USB11; + hs_hcd = usb_create_hcd(&dummy_hcd, &pdev->dev, dev_name(&pdev->dev)); + if (!hs_hcd) + return -ENOMEM; + hs_hcd->has_tt = 1; + + retval = usb_add_hcd(hs_hcd, 0, 0); + if (retval) + goto put_usb2_hcd; + + if (mod_data.is_super_speed) { + ss_hcd = usb_create_shared_hcd(&dummy_hcd, &pdev->dev, + dev_name(&pdev->dev), hs_hcd); + if (!ss_hcd) { + retval = -ENOMEM; + goto dealloc_usb2_hcd; + } + + retval = usb_add_hcd(ss_hcd, 0, 0); + if (retval) + goto put_usb3_hcd; + } + return 0; + +put_usb3_hcd: + usb_put_hcd(ss_hcd); +dealloc_usb2_hcd: + usb_remove_hcd(hs_hcd); +put_usb2_hcd: + usb_put_hcd(hs_hcd); + dum->hs_hcd = dum->ss_hcd = NULL; + return retval; +} + +static int dummy_hcd_remove(struct platform_device *pdev) +{ + struct dummy *dum; + + dum = hcd_to_dummy_hcd(platform_get_drvdata(pdev))->dum; + + if (dum->ss_hcd) { + usb_remove_hcd(dummy_hcd_to_hcd(dum->ss_hcd)); + usb_put_hcd(dummy_hcd_to_hcd(dum->ss_hcd)); + } + + usb_remove_hcd(dummy_hcd_to_hcd(dum->hs_hcd)); + usb_put_hcd(dummy_hcd_to_hcd(dum->hs_hcd)); + + dum->hs_hcd = NULL; + dum->ss_hcd = NULL; + + return 0; +} + +static int dummy_hcd_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct usb_hcd *hcd; + struct dummy_hcd *dum_hcd; + int rc = 0; + + dev_dbg(&pdev->dev, "%s\n", __func__); + + hcd = platform_get_drvdata(pdev); + dum_hcd = hcd_to_dummy_hcd(hcd); + if (dum_hcd->rh_state == DUMMY_RH_RUNNING) { + dev_warn(&pdev->dev, "Root hub isn't suspended!\n"); + rc = -EBUSY; + } else + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + return rc; +} + +static int dummy_hcd_resume(struct platform_device *pdev) +{ + struct usb_hcd *hcd; + + dev_dbg(&pdev->dev, "%s\n", __func__); + + hcd = platform_get_drvdata(pdev); + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + usb_hcd_poll_rh_status(hcd); + return 0; +} + +static struct platform_driver dummy_hcd_driver = { + .probe = dummy_hcd_probe, + .remove = dummy_hcd_remove, + .suspend = dummy_hcd_suspend, + .resume = dummy_hcd_resume, + .driver = { + .name = driver_name, + }, +}; + +/*-------------------------------------------------------------------------*/ +#define MAX_NUM_UDC 32 +static struct platform_device *the_udc_pdev[MAX_NUM_UDC]; +static struct platform_device *the_hcd_pdev[MAX_NUM_UDC]; + +static int __init dummy_hcd_init(void) +{ + int retval = -ENOMEM; + int i; + struct dummy *dum[MAX_NUM_UDC] = {}; + + if (usb_disabled()) + return -ENODEV; + + if (!mod_data.is_high_speed && mod_data.is_super_speed) + return -EINVAL; + + if (mod_data.num < 1 || mod_data.num > MAX_NUM_UDC) { + pr_err("Number of emulated UDC must be in range of 1...%d\n", + MAX_NUM_UDC); + return -EINVAL; + } + + for (i = 0; i < mod_data.num; i++) { + the_hcd_pdev[i] = platform_device_alloc(driver_name, i); + if (!the_hcd_pdev[i]) { + i--; + while (i >= 0) + platform_device_put(the_hcd_pdev[i--]); + return retval; + } + } + for (i = 0; i < mod_data.num; i++) { + the_udc_pdev[i] = platform_device_alloc(gadget_name, i); + if (!the_udc_pdev[i]) { + i--; + while (i >= 0) + platform_device_put(the_udc_pdev[i--]); + goto err_alloc_udc; + } + } + for (i = 0; i < mod_data.num; i++) { + dum[i] = kzalloc(sizeof(struct dummy), GFP_KERNEL); + if (!dum[i]) { + retval = -ENOMEM; + goto err_add_pdata; + } + retval = platform_device_add_data(the_hcd_pdev[i], &dum[i], + sizeof(void *)); + if (retval) + goto err_add_pdata; + retval = platform_device_add_data(the_udc_pdev[i], &dum[i], + sizeof(void *)); + if (retval) + goto err_add_pdata; + } + + retval = platform_driver_register(&dummy_hcd_driver); + if (retval < 0) + goto err_add_pdata; + retval = platform_driver_register(&dummy_udc_driver); + if (retval < 0) + goto err_register_udc_driver; + + for (i = 0; i < mod_data.num; i++) { + retval = platform_device_add(the_hcd_pdev[i]); + if (retval < 0) { + i--; + while (i >= 0) + platform_device_del(the_hcd_pdev[i--]); + goto err_add_hcd; + } + } + for (i = 0; i < mod_data.num; i++) { + if (!dum[i]->hs_hcd || + (!dum[i]->ss_hcd && mod_data.is_super_speed)) { + /* + * The hcd was added successfully but its probe + * function failed for some reason. + */ + retval = -EINVAL; + goto err_add_udc; + } + } + + for (i = 0; i < mod_data.num; i++) { + retval = platform_device_add(the_udc_pdev[i]); + if (retval < 0) { + i--; + while (i >= 0) + platform_device_del(the_udc_pdev[i--]); + goto err_add_udc; + } + } + + for (i = 0; i < mod_data.num; i++) { + if (!platform_get_drvdata(the_udc_pdev[i])) { + /* + * The udc was added successfully but its probe + * function failed for some reason. + */ + retval = -EINVAL; + goto err_probe_udc; + } + } + return retval; + +err_probe_udc: + for (i = 0; i < mod_data.num; i++) + platform_device_del(the_udc_pdev[i]); +err_add_udc: + for (i = 0; i < mod_data.num; i++) + platform_device_del(the_hcd_pdev[i]); +err_add_hcd: + platform_driver_unregister(&dummy_udc_driver); +err_register_udc_driver: + platform_driver_unregister(&dummy_hcd_driver); +err_add_pdata: + for (i = 0; i < mod_data.num; i++) + kfree(dum[i]); + for (i = 0; i < mod_data.num; i++) + platform_device_put(the_udc_pdev[i]); +err_alloc_udc: + for (i = 0; i < mod_data.num; i++) + platform_device_put(the_hcd_pdev[i]); + return retval; +} +module_init(dummy_hcd_init); + +static void __exit dummy_hcd_cleanup(void) +{ + int i; + + for (i = 0; i < mod_data.num; i++) { + struct dummy *dum; + + dum = *((void **)dev_get_platdata(&the_udc_pdev[i]->dev)); + + platform_device_unregister(the_udc_pdev[i]); + platform_device_unregister(the_hcd_pdev[i]); + kfree(dum); + } + platform_driver_unregister(&dummy_udc_driver); + platform_driver_unregister(&dummy_hcd_driver); +} +module_exit(dummy_hcd_cleanup); diff --git a/drivers/usb/gadget/udc/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c new file mode 100644 index 000000000..3350b7776 --- /dev/null +++ b/drivers/usb/gadget/udc/fotg210-udc.c @@ -0,0 +1,1239 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * FOTG210 UDC Driver supports Bulk transfer so far + * + * Copyright (C) 2013 Faraday Technology Corporation + * + * Author : Yuan-Hsin Chen <yhchen@faraday-tech.com> + */ + +#include <linux/dma-mapping.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + +#include "fotg210.h" + +#define DRIVER_DESC "FOTG210 USB Device Controller Driver" +#define DRIVER_VERSION "30-April-2013" + +static const char udc_name[] = "fotg210_udc"; +static const char * const fotg210_ep_name[] = { + "ep0", "ep1", "ep2", "ep3", "ep4"}; + +static void fotg210_disable_fifo_int(struct fotg210_ep *ep) +{ + u32 value = ioread32(ep->fotg210->reg + FOTG210_DMISGR1); + + if (ep->dir_in) + value |= DMISGR1_MF_IN_INT(ep->epnum - 1); + else + value |= DMISGR1_MF_OUTSPK_INT(ep->epnum - 1); + iowrite32(value, ep->fotg210->reg + FOTG210_DMISGR1); +} + +static void fotg210_enable_fifo_int(struct fotg210_ep *ep) +{ + u32 value = ioread32(ep->fotg210->reg + FOTG210_DMISGR1); + + if (ep->dir_in) + value &= ~DMISGR1_MF_IN_INT(ep->epnum - 1); + else + value &= ~DMISGR1_MF_OUTSPK_INT(ep->epnum - 1); + iowrite32(value, ep->fotg210->reg + FOTG210_DMISGR1); +} + +static void fotg210_set_cxdone(struct fotg210_udc *fotg210) +{ + u32 value = ioread32(fotg210->reg + FOTG210_DCFESR); + + value |= DCFESR_CX_DONE; + iowrite32(value, fotg210->reg + FOTG210_DCFESR); +} + +static void fotg210_done(struct fotg210_ep *ep, struct fotg210_request *req, + int status) +{ + list_del_init(&req->queue); + + /* don't modify queue heads during completion callback */ + if (ep->fotg210->gadget.speed == USB_SPEED_UNKNOWN) + req->req.status = -ESHUTDOWN; + else + req->req.status = status; + + spin_unlock(&ep->fotg210->lock); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&ep->fotg210->lock); + + if (ep->epnum) { + if (list_empty(&ep->queue)) + fotg210_disable_fifo_int(ep); + } else { + fotg210_set_cxdone(ep->fotg210); + } +} + +static void fotg210_fifo_ep_mapping(struct fotg210_ep *ep, u32 epnum, + u32 dir_in) +{ + struct fotg210_udc *fotg210 = ep->fotg210; + u32 val; + + /* Driver should map an ep to a fifo and then map the fifo + * to the ep. What a brain-damaged design! + */ + + /* map a fifo to an ep */ + val = ioread32(fotg210->reg + FOTG210_EPMAP); + val &= ~EPMAP_FIFONOMSK(epnum, dir_in); + val |= EPMAP_FIFONO(epnum, dir_in); + iowrite32(val, fotg210->reg + FOTG210_EPMAP); + + /* map the ep to the fifo */ + val = ioread32(fotg210->reg + FOTG210_FIFOMAP); + val &= ~FIFOMAP_EPNOMSK(epnum); + val |= FIFOMAP_EPNO(epnum); + iowrite32(val, fotg210->reg + FOTG210_FIFOMAP); + + /* enable fifo */ + val = ioread32(fotg210->reg + FOTG210_FIFOCF); + val |= FIFOCF_FIFO_EN(epnum - 1); + iowrite32(val, fotg210->reg + FOTG210_FIFOCF); +} + +static void fotg210_set_fifo_dir(struct fotg210_ep *ep, u32 epnum, u32 dir_in) +{ + struct fotg210_udc *fotg210 = ep->fotg210; + u32 val; + + val = ioread32(fotg210->reg + FOTG210_FIFOMAP); + val |= (dir_in ? FIFOMAP_DIRIN(epnum - 1) : FIFOMAP_DIROUT(epnum - 1)); + iowrite32(val, fotg210->reg + FOTG210_FIFOMAP); +} + +static void fotg210_set_tfrtype(struct fotg210_ep *ep, u32 epnum, u32 type) +{ + struct fotg210_udc *fotg210 = ep->fotg210; + u32 val; + + val = ioread32(fotg210->reg + FOTG210_FIFOCF); + val |= FIFOCF_TYPE(type, epnum - 1); + iowrite32(val, fotg210->reg + FOTG210_FIFOCF); +} + +static void fotg210_set_mps(struct fotg210_ep *ep, u32 epnum, u32 mps, + u32 dir_in) +{ + struct fotg210_udc *fotg210 = ep->fotg210; + u32 val; + u32 offset = dir_in ? FOTG210_INEPMPSR(epnum) : + FOTG210_OUTEPMPSR(epnum); + + val = ioread32(fotg210->reg + offset); + val |= INOUTEPMPSR_MPS(mps); + iowrite32(val, fotg210->reg + offset); +} + +static int fotg210_config_ep(struct fotg210_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + struct fotg210_udc *fotg210 = ep->fotg210; + + fotg210_set_fifo_dir(ep, ep->epnum, ep->dir_in); + fotg210_set_tfrtype(ep, ep->epnum, ep->type); + fotg210_set_mps(ep, ep->epnum, ep->ep.maxpacket, ep->dir_in); + fotg210_fifo_ep_mapping(ep, ep->epnum, ep->dir_in); + + fotg210->ep[ep->epnum] = ep; + + return 0; +} + +static int fotg210_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct fotg210_ep *ep; + + ep = container_of(_ep, struct fotg210_ep, ep); + + ep->desc = desc; + ep->epnum = usb_endpoint_num(desc); + ep->type = usb_endpoint_type(desc); + ep->dir_in = usb_endpoint_dir_in(desc); + ep->ep.maxpacket = usb_endpoint_maxp(desc); + + return fotg210_config_ep(ep, desc); +} + +static void fotg210_reset_tseq(struct fotg210_udc *fotg210, u8 epnum) +{ + struct fotg210_ep *ep = fotg210->ep[epnum]; + u32 value; + void __iomem *reg; + + reg = (ep->dir_in) ? + fotg210->reg + FOTG210_INEPMPSR(epnum) : + fotg210->reg + FOTG210_OUTEPMPSR(epnum); + + /* Note: Driver needs to set and clear INOUTEPMPSR_RESET_TSEQ + * bit. Controller wouldn't clear this bit. WTF!!! + */ + + value = ioread32(reg); + value |= INOUTEPMPSR_RESET_TSEQ; + iowrite32(value, reg); + + value = ioread32(reg); + value &= ~INOUTEPMPSR_RESET_TSEQ; + iowrite32(value, reg); +} + +static int fotg210_ep_release(struct fotg210_ep *ep) +{ + if (!ep->epnum) + return 0; + ep->epnum = 0; + ep->stall = 0; + ep->wedged = 0; + + fotg210_reset_tseq(ep->fotg210, ep->epnum); + + return 0; +} + +static int fotg210_ep_disable(struct usb_ep *_ep) +{ + struct fotg210_ep *ep; + struct fotg210_request *req; + unsigned long flags; + + BUG_ON(!_ep); + + ep = container_of(_ep, struct fotg210_ep, ep); + + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, + struct fotg210_request, queue); + spin_lock_irqsave(&ep->fotg210->lock, flags); + fotg210_done(ep, req, -ECONNRESET); + spin_unlock_irqrestore(&ep->fotg210->lock, flags); + } + + return fotg210_ep_release(ep); +} + +static struct usb_request *fotg210_ep_alloc_request(struct usb_ep *_ep, + gfp_t gfp_flags) +{ + struct fotg210_request *req; + + req = kzalloc(sizeof(struct fotg210_request), gfp_flags); + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->queue); + + return &req->req; +} + +static void fotg210_ep_free_request(struct usb_ep *_ep, + struct usb_request *_req) +{ + struct fotg210_request *req; + + req = container_of(_req, struct fotg210_request, req); + kfree(req); +} + +static void fotg210_enable_dma(struct fotg210_ep *ep, + dma_addr_t d, u32 len) +{ + u32 value; + struct fotg210_udc *fotg210 = ep->fotg210; + + /* set transfer length and direction */ + value = ioread32(fotg210->reg + FOTG210_DMACPSR1); + value &= ~(DMACPSR1_DMA_LEN(0xFFFF) | DMACPSR1_DMA_TYPE(1)); + value |= DMACPSR1_DMA_LEN(len) | DMACPSR1_DMA_TYPE(ep->dir_in); + iowrite32(value, fotg210->reg + FOTG210_DMACPSR1); + + /* set device DMA target FIFO number */ + value = ioread32(fotg210->reg + FOTG210_DMATFNR); + if (ep->epnum) + value |= DMATFNR_ACC_FN(ep->epnum - 1); + else + value |= DMATFNR_ACC_CXF; + iowrite32(value, fotg210->reg + FOTG210_DMATFNR); + + /* set DMA memory address */ + iowrite32(d, fotg210->reg + FOTG210_DMACPSR2); + + /* enable MDMA_EROR and MDMA_CMPLT interrupt */ + value = ioread32(fotg210->reg + FOTG210_DMISGR2); + value &= ~(DMISGR2_MDMA_CMPLT | DMISGR2_MDMA_ERROR); + iowrite32(value, fotg210->reg + FOTG210_DMISGR2); + + /* start DMA */ + value = ioread32(fotg210->reg + FOTG210_DMACPSR1); + value |= DMACPSR1_DMA_START; + iowrite32(value, fotg210->reg + FOTG210_DMACPSR1); +} + +static void fotg210_disable_dma(struct fotg210_ep *ep) +{ + iowrite32(DMATFNR_DISDMA, ep->fotg210->reg + FOTG210_DMATFNR); +} + +static void fotg210_wait_dma_done(struct fotg210_ep *ep) +{ + u32 value; + + do { + value = ioread32(ep->fotg210->reg + FOTG210_DISGR2); + if ((value & DISGR2_USBRST_INT) || + (value & DISGR2_DMA_ERROR)) + goto dma_reset; + } while (!(value & DISGR2_DMA_CMPLT)); + + value &= ~DISGR2_DMA_CMPLT; + iowrite32(value, ep->fotg210->reg + FOTG210_DISGR2); + return; + +dma_reset: + value = ioread32(ep->fotg210->reg + FOTG210_DMACPSR1); + value |= DMACPSR1_DMA_ABORT; + iowrite32(value, ep->fotg210->reg + FOTG210_DMACPSR1); + + /* reset fifo */ + if (ep->epnum) { + value = ioread32(ep->fotg210->reg + + FOTG210_FIBCR(ep->epnum - 1)); + value |= FIBCR_FFRST; + iowrite32(value, ep->fotg210->reg + + FOTG210_FIBCR(ep->epnum - 1)); + } else { + value = ioread32(ep->fotg210->reg + FOTG210_DCFESR); + value |= DCFESR_CX_CLR; + iowrite32(value, ep->fotg210->reg + FOTG210_DCFESR); + } +} + +static void fotg210_start_dma(struct fotg210_ep *ep, + struct fotg210_request *req) +{ + struct device *dev = &ep->fotg210->gadget.dev; + dma_addr_t d; + u8 *buffer; + u32 length; + + if (ep->epnum) { + if (ep->dir_in) { + buffer = req->req.buf; + length = req->req.length; + } else { + buffer = req->req.buf + req->req.actual; + length = ioread32(ep->fotg210->reg + + FOTG210_FIBCR(ep->epnum - 1)) & FIBCR_BCFX; + if (length > req->req.length - req->req.actual) + length = req->req.length - req->req.actual; + } + } else { + buffer = req->req.buf + req->req.actual; + if (req->req.length - req->req.actual > ep->ep.maxpacket) + length = ep->ep.maxpacket; + else + length = req->req.length - req->req.actual; + } + + d = dma_map_single(dev, buffer, length, + ep->dir_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + + if (dma_mapping_error(dev, d)) { + pr_err("dma_mapping_error\n"); + return; + } + + fotg210_enable_dma(ep, d, length); + + /* check if dma is done */ + fotg210_wait_dma_done(ep); + + fotg210_disable_dma(ep); + + /* update actual transfer length */ + req->req.actual += length; + + dma_unmap_single(dev, d, length, DMA_TO_DEVICE); +} + +static void fotg210_ep0_queue(struct fotg210_ep *ep, + struct fotg210_request *req) +{ + if (!req->req.length) { + fotg210_done(ep, req, 0); + return; + } + if (ep->dir_in) { /* if IN */ + fotg210_start_dma(ep, req); + if (req->req.length == req->req.actual) + fotg210_done(ep, req, 0); + } else { /* OUT */ + u32 value = ioread32(ep->fotg210->reg + FOTG210_DMISGR0); + + value &= ~DMISGR0_MCX_OUT_INT; + iowrite32(value, ep->fotg210->reg + FOTG210_DMISGR0); + } +} + +static int fotg210_ep_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t gfp_flags) +{ + struct fotg210_ep *ep; + struct fotg210_request *req; + unsigned long flags; + int request = 0; + + ep = container_of(_ep, struct fotg210_ep, ep); + req = container_of(_req, struct fotg210_request, req); + + if (ep->fotg210->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + spin_lock_irqsave(&ep->fotg210->lock, flags); + + if (list_empty(&ep->queue)) + request = 1; + + list_add_tail(&req->queue, &ep->queue); + + req->req.actual = 0; + req->req.status = -EINPROGRESS; + + if (!ep->epnum) /* ep0 */ + fotg210_ep0_queue(ep, req); + else if (request && !ep->stall) + fotg210_enable_fifo_int(ep); + + spin_unlock_irqrestore(&ep->fotg210->lock, flags); + + return 0; +} + +static int fotg210_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct fotg210_ep *ep; + struct fotg210_request *req; + unsigned long flags; + + ep = container_of(_ep, struct fotg210_ep, ep); + req = container_of(_req, struct fotg210_request, req); + + spin_lock_irqsave(&ep->fotg210->lock, flags); + if (!list_empty(&ep->queue)) + fotg210_done(ep, req, -ECONNRESET); + spin_unlock_irqrestore(&ep->fotg210->lock, flags); + + return 0; +} + +static void fotg210_set_epnstall(struct fotg210_ep *ep) +{ + struct fotg210_udc *fotg210 = ep->fotg210; + u32 value; + void __iomem *reg; + + /* check if IN FIFO is empty before stall */ + if (ep->dir_in) { + do { + value = ioread32(fotg210->reg + FOTG210_DCFESR); + } while (!(value & DCFESR_FIFO_EMPTY(ep->epnum - 1))); + } + + reg = (ep->dir_in) ? + fotg210->reg + FOTG210_INEPMPSR(ep->epnum) : + fotg210->reg + FOTG210_OUTEPMPSR(ep->epnum); + value = ioread32(reg); + value |= INOUTEPMPSR_STL_EP; + iowrite32(value, reg); +} + +static void fotg210_clear_epnstall(struct fotg210_ep *ep) +{ + struct fotg210_udc *fotg210 = ep->fotg210; + u32 value; + void __iomem *reg; + + reg = (ep->dir_in) ? + fotg210->reg + FOTG210_INEPMPSR(ep->epnum) : + fotg210->reg + FOTG210_OUTEPMPSR(ep->epnum); + value = ioread32(reg); + value &= ~INOUTEPMPSR_STL_EP; + iowrite32(value, reg); +} + +static int fotg210_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedge) +{ + struct fotg210_ep *ep; + struct fotg210_udc *fotg210; + unsigned long flags; + + ep = container_of(_ep, struct fotg210_ep, ep); + + fotg210 = ep->fotg210; + + spin_lock_irqsave(&ep->fotg210->lock, flags); + + if (value) { + fotg210_set_epnstall(ep); + ep->stall = 1; + if (wedge) + ep->wedged = 1; + } else { + fotg210_reset_tseq(fotg210, ep->epnum); + fotg210_clear_epnstall(ep); + ep->stall = 0; + ep->wedged = 0; + if (!list_empty(&ep->queue)) + fotg210_enable_fifo_int(ep); + } + + spin_unlock_irqrestore(&ep->fotg210->lock, flags); + return 0; +} + +static int fotg210_ep_set_halt(struct usb_ep *_ep, int value) +{ + return fotg210_set_halt_and_wedge(_ep, value, 0); +} + +static int fotg210_ep_set_wedge(struct usb_ep *_ep) +{ + return fotg210_set_halt_and_wedge(_ep, 1, 1); +} + +static void fotg210_ep_fifo_flush(struct usb_ep *_ep) +{ +} + +static const struct usb_ep_ops fotg210_ep_ops = { + .enable = fotg210_ep_enable, + .disable = fotg210_ep_disable, + + .alloc_request = fotg210_ep_alloc_request, + .free_request = fotg210_ep_free_request, + + .queue = fotg210_ep_queue, + .dequeue = fotg210_ep_dequeue, + + .set_halt = fotg210_ep_set_halt, + .fifo_flush = fotg210_ep_fifo_flush, + .set_wedge = fotg210_ep_set_wedge, +}; + +static void fotg210_clear_tx0byte(struct fotg210_udc *fotg210) +{ + u32 value = ioread32(fotg210->reg + FOTG210_TX0BYTE); + + value &= ~(TX0BYTE_EP1 | TX0BYTE_EP2 | TX0BYTE_EP3 + | TX0BYTE_EP4); + iowrite32(value, fotg210->reg + FOTG210_TX0BYTE); +} + +static void fotg210_clear_rx0byte(struct fotg210_udc *fotg210) +{ + u32 value = ioread32(fotg210->reg + FOTG210_RX0BYTE); + + value &= ~(RX0BYTE_EP1 | RX0BYTE_EP2 | RX0BYTE_EP3 + | RX0BYTE_EP4); + iowrite32(value, fotg210->reg + FOTG210_RX0BYTE); +} + +/* read 8-byte setup packet only */ +static void fotg210_rdsetupp(struct fotg210_udc *fotg210, + u8 *buffer) +{ + int i = 0; + u8 *tmp = buffer; + u32 data; + u32 length = 8; + + iowrite32(DMATFNR_ACC_CXF, fotg210->reg + FOTG210_DMATFNR); + + for (i = (length >> 2); i > 0; i--) { + data = ioread32(fotg210->reg + FOTG210_CXPORT); + *tmp = data & 0xFF; + *(tmp + 1) = (data >> 8) & 0xFF; + *(tmp + 2) = (data >> 16) & 0xFF; + *(tmp + 3) = (data >> 24) & 0xFF; + tmp = tmp + 4; + } + + switch (length % 4) { + case 1: + data = ioread32(fotg210->reg + FOTG210_CXPORT); + *tmp = data & 0xFF; + break; + case 2: + data = ioread32(fotg210->reg + FOTG210_CXPORT); + *tmp = data & 0xFF; + *(tmp + 1) = (data >> 8) & 0xFF; + break; + case 3: + data = ioread32(fotg210->reg + FOTG210_CXPORT); + *tmp = data & 0xFF; + *(tmp + 1) = (data >> 8) & 0xFF; + *(tmp + 2) = (data >> 16) & 0xFF; + break; + default: + break; + } + + iowrite32(DMATFNR_DISDMA, fotg210->reg + FOTG210_DMATFNR); +} + +static void fotg210_set_configuration(struct fotg210_udc *fotg210) +{ + u32 value = ioread32(fotg210->reg + FOTG210_DAR); + + value |= DAR_AFT_CONF; + iowrite32(value, fotg210->reg + FOTG210_DAR); +} + +static void fotg210_set_dev_addr(struct fotg210_udc *fotg210, u32 addr) +{ + u32 value = ioread32(fotg210->reg + FOTG210_DAR); + + value |= (addr & 0x7F); + iowrite32(value, fotg210->reg + FOTG210_DAR); +} + +static void fotg210_set_cxstall(struct fotg210_udc *fotg210) +{ + u32 value = ioread32(fotg210->reg + FOTG210_DCFESR); + + value |= DCFESR_CX_STL; + iowrite32(value, fotg210->reg + FOTG210_DCFESR); +} + +static void fotg210_request_error(struct fotg210_udc *fotg210) +{ + fotg210_set_cxstall(fotg210); + pr_err("request error!!\n"); +} + +static void fotg210_set_address(struct fotg210_udc *fotg210, + struct usb_ctrlrequest *ctrl) +{ + if (le16_to_cpu(ctrl->wValue) >= 0x0100) { + fotg210_request_error(fotg210); + } else { + fotg210_set_dev_addr(fotg210, le16_to_cpu(ctrl->wValue)); + fotg210_set_cxdone(fotg210); + } +} + +static void fotg210_set_feature(struct fotg210_udc *fotg210, + struct usb_ctrlrequest *ctrl) +{ + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + fotg210_set_cxdone(fotg210); + break; + case USB_RECIP_INTERFACE: + fotg210_set_cxdone(fotg210); + break; + case USB_RECIP_ENDPOINT: { + u8 epnum; + epnum = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK; + if (epnum) + fotg210_set_epnstall(fotg210->ep[epnum]); + else + fotg210_set_cxstall(fotg210); + fotg210_set_cxdone(fotg210); + } + break; + default: + fotg210_request_error(fotg210); + break; + } +} + +static void fotg210_clear_feature(struct fotg210_udc *fotg210, + struct usb_ctrlrequest *ctrl) +{ + struct fotg210_ep *ep = + fotg210->ep[ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK]; + + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + fotg210_set_cxdone(fotg210); + break; + case USB_RECIP_INTERFACE: + fotg210_set_cxdone(fotg210); + break; + case USB_RECIP_ENDPOINT: + if (ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK) { + if (ep->wedged) { + fotg210_set_cxdone(fotg210); + break; + } + if (ep->stall) + fotg210_set_halt_and_wedge(&ep->ep, 0, 0); + } + fotg210_set_cxdone(fotg210); + break; + default: + fotg210_request_error(fotg210); + break; + } +} + +static int fotg210_is_epnstall(struct fotg210_ep *ep) +{ + struct fotg210_udc *fotg210 = ep->fotg210; + u32 value; + void __iomem *reg; + + reg = (ep->dir_in) ? + fotg210->reg + FOTG210_INEPMPSR(ep->epnum) : + fotg210->reg + FOTG210_OUTEPMPSR(ep->epnum); + value = ioread32(reg); + return value & INOUTEPMPSR_STL_EP ? 1 : 0; +} + +/* For EP0 requests triggered by this driver (currently GET_STATUS response) */ +static void fotg210_ep0_complete(struct usb_ep *_ep, struct usb_request *req) +{ + struct fotg210_ep *ep; + struct fotg210_udc *fotg210; + + ep = container_of(_ep, struct fotg210_ep, ep); + fotg210 = ep->fotg210; + + if (req->status || req->actual != req->length) { + dev_warn(&fotg210->gadget.dev, "EP0 request failed: %d\n", req->status); + } +} + +static void fotg210_get_status(struct fotg210_udc *fotg210, + struct usb_ctrlrequest *ctrl) +{ + u8 epnum; + + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + fotg210->ep0_data = cpu_to_le16(1 << USB_DEVICE_SELF_POWERED); + break; + case USB_RECIP_INTERFACE: + fotg210->ep0_data = cpu_to_le16(0); + break; + case USB_RECIP_ENDPOINT: + epnum = ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK; + if (epnum) + fotg210->ep0_data = + cpu_to_le16(fotg210_is_epnstall(fotg210->ep[epnum]) + << USB_ENDPOINT_HALT); + else + fotg210_request_error(fotg210); + break; + + default: + fotg210_request_error(fotg210); + return; /* exit */ + } + + fotg210->ep0_req->buf = &fotg210->ep0_data; + fotg210->ep0_req->length = 2; + + spin_unlock(&fotg210->lock); + fotg210_ep_queue(fotg210->gadget.ep0, fotg210->ep0_req, GFP_ATOMIC); + spin_lock(&fotg210->lock); +} + +static int fotg210_setup_packet(struct fotg210_udc *fotg210, + struct usb_ctrlrequest *ctrl) +{ + u8 *p = (u8 *)ctrl; + u8 ret = 0; + + fotg210_rdsetupp(fotg210, p); + + fotg210->ep[0]->dir_in = ctrl->bRequestType & USB_DIR_IN; + + if (fotg210->gadget.speed == USB_SPEED_UNKNOWN) { + u32 value = ioread32(fotg210->reg + FOTG210_DMCR); + fotg210->gadget.speed = value & DMCR_HS_EN ? + USB_SPEED_HIGH : USB_SPEED_FULL; + } + + /* check request */ + if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { + switch (ctrl->bRequest) { + case USB_REQ_GET_STATUS: + fotg210_get_status(fotg210, ctrl); + break; + case USB_REQ_CLEAR_FEATURE: + fotg210_clear_feature(fotg210, ctrl); + break; + case USB_REQ_SET_FEATURE: + fotg210_set_feature(fotg210, ctrl); + break; + case USB_REQ_SET_ADDRESS: + fotg210_set_address(fotg210, ctrl); + break; + case USB_REQ_SET_CONFIGURATION: + fotg210_set_configuration(fotg210); + ret = 1; + break; + default: + ret = 1; + break; + } + } else { + ret = 1; + } + + return ret; +} + +static void fotg210_ep0out(struct fotg210_udc *fotg210) +{ + struct fotg210_ep *ep = fotg210->ep[0]; + + if (!list_empty(&ep->queue) && !ep->dir_in) { + struct fotg210_request *req; + + req = list_first_entry(&ep->queue, + struct fotg210_request, queue); + + if (req->req.length) + fotg210_start_dma(ep, req); + + if ((req->req.length - req->req.actual) < ep->ep.maxpacket) + fotg210_done(ep, req, 0); + } else { + pr_err("%s : empty queue\n", __func__); + } +} + +static void fotg210_ep0in(struct fotg210_udc *fotg210) +{ + struct fotg210_ep *ep = fotg210->ep[0]; + + if ((!list_empty(&ep->queue)) && (ep->dir_in)) { + struct fotg210_request *req; + + req = list_entry(ep->queue.next, + struct fotg210_request, queue); + + if (req->req.length) + fotg210_start_dma(ep, req); + + if (req->req.actual == req->req.length) + fotg210_done(ep, req, 0); + } else { + fotg210_set_cxdone(fotg210); + } +} + +static void fotg210_clear_comabt_int(struct fotg210_udc *fotg210) +{ + u32 value = ioread32(fotg210->reg + FOTG210_DISGR0); + + value &= ~DISGR0_CX_COMABT_INT; + iowrite32(value, fotg210->reg + FOTG210_DISGR0); +} + +static void fotg210_in_fifo_handler(struct fotg210_ep *ep) +{ + struct fotg210_request *req = list_entry(ep->queue.next, + struct fotg210_request, queue); + + if (req->req.length) + fotg210_start_dma(ep, req); + fotg210_done(ep, req, 0); +} + +static void fotg210_out_fifo_handler(struct fotg210_ep *ep) +{ + struct fotg210_request *req = list_entry(ep->queue.next, + struct fotg210_request, queue); + int disgr1 = ioread32(ep->fotg210->reg + FOTG210_DISGR1); + + fotg210_start_dma(ep, req); + + /* Complete the request when it's full or a short packet arrived. + * Like other drivers, short_not_ok isn't handled. + */ + + if (req->req.length == req->req.actual || + (disgr1 & DISGR1_SPK_INT(ep->epnum - 1))) + fotg210_done(ep, req, 0); +} + +static irqreturn_t fotg210_irq(int irq, void *_fotg210) +{ + struct fotg210_udc *fotg210 = _fotg210; + u32 int_grp = ioread32(fotg210->reg + FOTG210_DIGR); + u32 int_msk = ioread32(fotg210->reg + FOTG210_DMIGR); + + int_grp &= ~int_msk; + + spin_lock(&fotg210->lock); + + if (int_grp & DIGR_INT_G2) { + void __iomem *reg = fotg210->reg + FOTG210_DISGR2; + u32 int_grp2 = ioread32(reg); + u32 int_msk2 = ioread32(fotg210->reg + FOTG210_DMISGR2); + u32 value; + + int_grp2 &= ~int_msk2; + + if (int_grp2 & DISGR2_USBRST_INT) { + usb_gadget_udc_reset(&fotg210->gadget, + fotg210->driver); + value = ioread32(reg); + value &= ~DISGR2_USBRST_INT; + iowrite32(value, reg); + pr_info("fotg210 udc reset\n"); + } + if (int_grp2 & DISGR2_SUSP_INT) { + value = ioread32(reg); + value &= ~DISGR2_SUSP_INT; + iowrite32(value, reg); + pr_info("fotg210 udc suspend\n"); + } + if (int_grp2 & DISGR2_RESM_INT) { + value = ioread32(reg); + value &= ~DISGR2_RESM_INT; + iowrite32(value, reg); + pr_info("fotg210 udc resume\n"); + } + if (int_grp2 & DISGR2_ISO_SEQ_ERR_INT) { + value = ioread32(reg); + value &= ~DISGR2_ISO_SEQ_ERR_INT; + iowrite32(value, reg); + pr_info("fotg210 iso sequence error\n"); + } + if (int_grp2 & DISGR2_ISO_SEQ_ABORT_INT) { + value = ioread32(reg); + value &= ~DISGR2_ISO_SEQ_ABORT_INT; + iowrite32(value, reg); + pr_info("fotg210 iso sequence abort\n"); + } + if (int_grp2 & DISGR2_TX0BYTE_INT) { + fotg210_clear_tx0byte(fotg210); + value = ioread32(reg); + value &= ~DISGR2_TX0BYTE_INT; + iowrite32(value, reg); + pr_info("fotg210 transferred 0 byte\n"); + } + if (int_grp2 & DISGR2_RX0BYTE_INT) { + fotg210_clear_rx0byte(fotg210); + value = ioread32(reg); + value &= ~DISGR2_RX0BYTE_INT; + iowrite32(value, reg); + pr_info("fotg210 received 0 byte\n"); + } + if (int_grp2 & DISGR2_DMA_ERROR) { + value = ioread32(reg); + value &= ~DISGR2_DMA_ERROR; + iowrite32(value, reg); + } + } + + if (int_grp & DIGR_INT_G0) { + void __iomem *reg = fotg210->reg + FOTG210_DISGR0; + u32 int_grp0 = ioread32(reg); + u32 int_msk0 = ioread32(fotg210->reg + FOTG210_DMISGR0); + struct usb_ctrlrequest ctrl; + + int_grp0 &= ~int_msk0; + + /* the highest priority in this source register */ + if (int_grp0 & DISGR0_CX_COMABT_INT) { + fotg210_clear_comabt_int(fotg210); + pr_info("fotg210 CX command abort\n"); + } + + if (int_grp0 & DISGR0_CX_SETUP_INT) { + if (fotg210_setup_packet(fotg210, &ctrl)) { + spin_unlock(&fotg210->lock); + if (fotg210->driver->setup(&fotg210->gadget, + &ctrl) < 0) + fotg210_set_cxstall(fotg210); + spin_lock(&fotg210->lock); + } + } + if (int_grp0 & DISGR0_CX_COMEND_INT) + pr_info("fotg210 cmd end\n"); + + if (int_grp0 & DISGR0_CX_IN_INT) + fotg210_ep0in(fotg210); + + if (int_grp0 & DISGR0_CX_OUT_INT) + fotg210_ep0out(fotg210); + + if (int_grp0 & DISGR0_CX_COMFAIL_INT) { + fotg210_set_cxstall(fotg210); + pr_info("fotg210 ep0 fail\n"); + } + } + + if (int_grp & DIGR_INT_G1) { + void __iomem *reg = fotg210->reg + FOTG210_DISGR1; + u32 int_grp1 = ioread32(reg); + u32 int_msk1 = ioread32(fotg210->reg + FOTG210_DMISGR1); + int fifo; + + int_grp1 &= ~int_msk1; + + for (fifo = 0; fifo < FOTG210_MAX_FIFO_NUM; fifo++) { + if (int_grp1 & DISGR1_IN_INT(fifo)) + fotg210_in_fifo_handler(fotg210->ep[fifo + 1]); + + if ((int_grp1 & DISGR1_OUT_INT(fifo)) || + (int_grp1 & DISGR1_SPK_INT(fifo))) + fotg210_out_fifo_handler(fotg210->ep[fifo + 1]); + } + } + + spin_unlock(&fotg210->lock); + + return IRQ_HANDLED; +} + +static void fotg210_disable_unplug(struct fotg210_udc *fotg210) +{ + u32 reg = ioread32(fotg210->reg + FOTG210_PHYTMSR); + + reg &= ~PHYTMSR_UNPLUG; + iowrite32(reg, fotg210->reg + FOTG210_PHYTMSR); +} + +static int fotg210_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) +{ + struct fotg210_udc *fotg210 = gadget_to_fotg210(g); + u32 value; + + /* hook up the driver */ + fotg210->driver = driver; + + /* enable device global interrupt */ + value = ioread32(fotg210->reg + FOTG210_DMCR); + value |= DMCR_GLINT_EN; + iowrite32(value, fotg210->reg + FOTG210_DMCR); + + return 0; +} + +static void fotg210_init(struct fotg210_udc *fotg210) +{ + u32 value; + + /* disable global interrupt and set int polarity to active high */ + iowrite32(GMIR_MHC_INT | GMIR_MOTG_INT | GMIR_INT_POLARITY, + fotg210->reg + FOTG210_GMIR); + + /* disable device global interrupt */ + value = ioread32(fotg210->reg + FOTG210_DMCR); + value &= ~DMCR_GLINT_EN; + iowrite32(value, fotg210->reg + FOTG210_DMCR); + + /* enable only grp2 irqs we handle */ + iowrite32(~(DISGR2_DMA_ERROR | DISGR2_RX0BYTE_INT | DISGR2_TX0BYTE_INT + | DISGR2_ISO_SEQ_ABORT_INT | DISGR2_ISO_SEQ_ERR_INT + | DISGR2_RESM_INT | DISGR2_SUSP_INT | DISGR2_USBRST_INT), + fotg210->reg + FOTG210_DMISGR2); + + /* disable all fifo interrupt */ + iowrite32(~(u32)0, fotg210->reg + FOTG210_DMISGR1); + + /* disable cmd end */ + value = ioread32(fotg210->reg + FOTG210_DMISGR0); + value |= DMISGR0_MCX_COMEND; + iowrite32(value, fotg210->reg + FOTG210_DMISGR0); +} + +static int fotg210_udc_stop(struct usb_gadget *g) +{ + struct fotg210_udc *fotg210 = gadget_to_fotg210(g); + unsigned long flags; + + spin_lock_irqsave(&fotg210->lock, flags); + + fotg210_init(fotg210); + fotg210->driver = NULL; + + spin_unlock_irqrestore(&fotg210->lock, flags); + + return 0; +} + +static const struct usb_gadget_ops fotg210_gadget_ops = { + .udc_start = fotg210_udc_start, + .udc_stop = fotg210_udc_stop, +}; + +static int fotg210_udc_remove(struct platform_device *pdev) +{ + struct fotg210_udc *fotg210 = platform_get_drvdata(pdev); + int i; + + usb_del_gadget_udc(&fotg210->gadget); + iounmap(fotg210->reg); + free_irq(platform_get_irq(pdev, 0), fotg210); + + fotg210_ep_free_request(&fotg210->ep[0]->ep, fotg210->ep0_req); + for (i = 0; i < FOTG210_MAX_NUM_EP; i++) + kfree(fotg210->ep[i]); + kfree(fotg210); + + return 0; +} + +static int fotg210_udc_probe(struct platform_device *pdev) +{ + struct resource *res, *ires; + struct fotg210_udc *fotg210 = NULL; + struct fotg210_ep *_ep[FOTG210_MAX_NUM_EP]; + int ret = 0; + int i; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + pr_err("platform_get_resource error.\n"); + return -ENODEV; + } + + ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!ires) { + pr_err("platform_get_resource IORESOURCE_IRQ error.\n"); + return -ENODEV; + } + + ret = -ENOMEM; + + /* initialize udc */ + fotg210 = kzalloc(sizeof(struct fotg210_udc), GFP_KERNEL); + if (fotg210 == NULL) + goto err; + + for (i = 0; i < FOTG210_MAX_NUM_EP; i++) { + _ep[i] = kzalloc(sizeof(struct fotg210_ep), GFP_KERNEL); + if (_ep[i] == NULL) + goto err_alloc; + fotg210->ep[i] = _ep[i]; + } + + fotg210->reg = ioremap(res->start, resource_size(res)); + if (fotg210->reg == NULL) { + pr_err("ioremap error.\n"); + goto err_alloc; + } + + spin_lock_init(&fotg210->lock); + + platform_set_drvdata(pdev, fotg210); + + fotg210->gadget.ops = &fotg210_gadget_ops; + + fotg210->gadget.max_speed = USB_SPEED_HIGH; + fotg210->gadget.dev.parent = &pdev->dev; + fotg210->gadget.dev.dma_mask = pdev->dev.dma_mask; + fotg210->gadget.name = udc_name; + + INIT_LIST_HEAD(&fotg210->gadget.ep_list); + + for (i = 0; i < FOTG210_MAX_NUM_EP; i++) { + struct fotg210_ep *ep = fotg210->ep[i]; + + if (i) { + INIT_LIST_HEAD(&fotg210->ep[i]->ep.ep_list); + list_add_tail(&fotg210->ep[i]->ep.ep_list, + &fotg210->gadget.ep_list); + } + ep->fotg210 = fotg210; + INIT_LIST_HEAD(&ep->queue); + ep->ep.name = fotg210_ep_name[i]; + ep->ep.ops = &fotg210_ep_ops; + usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0); + + if (i == 0) { + ep->ep.caps.type_control = true; + } else { + ep->ep.caps.type_iso = true; + ep->ep.caps.type_bulk = true; + ep->ep.caps.type_int = true; + } + + ep->ep.caps.dir_in = true; + ep->ep.caps.dir_out = true; + } + usb_ep_set_maxpacket_limit(&fotg210->ep[0]->ep, 0x40); + fotg210->gadget.ep0 = &fotg210->ep[0]->ep; + INIT_LIST_HEAD(&fotg210->gadget.ep0->ep_list); + + fotg210->ep0_req = fotg210_ep_alloc_request(&fotg210->ep[0]->ep, + GFP_KERNEL); + if (fotg210->ep0_req == NULL) + goto err_map; + + fotg210->ep0_req->complete = fotg210_ep0_complete; + + fotg210_init(fotg210); + + fotg210_disable_unplug(fotg210); + + ret = request_irq(ires->start, fotg210_irq, IRQF_SHARED, + udc_name, fotg210); + if (ret < 0) { + pr_err("request_irq error (%d)\n", ret); + goto err_req; + } + + ret = usb_add_gadget_udc(&pdev->dev, &fotg210->gadget); + if (ret) + goto err_add_udc; + + dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION); + + return 0; + +err_add_udc: + free_irq(ires->start, fotg210); + +err_req: + fotg210_ep_free_request(&fotg210->ep[0]->ep, fotg210->ep0_req); + +err_map: + iounmap(fotg210->reg); + +err_alloc: + for (i = 0; i < FOTG210_MAX_NUM_EP; i++) + kfree(fotg210->ep[i]); + kfree(fotg210); + +err: + return ret; +} + +static struct platform_driver fotg210_driver = { + .driver = { + .name = udc_name, + }, + .probe = fotg210_udc_probe, + .remove = fotg210_udc_remove, +}; + +module_platform_driver(fotg210_driver); + +MODULE_AUTHOR("Yuan-Hsin Chen, Feng-Hsin Chiang <john453@faraday-tech.com>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/usb/gadget/udc/fotg210.h b/drivers/usb/gadget/udc/fotg210.h new file mode 100644 index 000000000..08c329575 --- /dev/null +++ b/drivers/usb/gadget/udc/fotg210.h @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Faraday FOTG210 USB OTG controller + * + * Copyright (C) 2013 Faraday Technology Corporation + * Author: Yuan-Hsin Chen <yhchen@faraday-tech.com> + */ + +#include <linux/kernel.h> + +#define FOTG210_MAX_NUM_EP 5 /* ep0...ep4 */ +#define FOTG210_MAX_FIFO_NUM 4 /* fifo0...fifo4 */ + +/* Global Mask of HC/OTG/DEV interrupt Register(0xC4) */ +#define FOTG210_GMIR 0xC4 +#define GMIR_INT_POLARITY 0x8 /*Active High*/ +#define GMIR_MHC_INT 0x4 +#define GMIR_MOTG_INT 0x2 +#define GMIR_MDEV_INT 0x1 + +/* Device Main Control Register(0x100) */ +#define FOTG210_DMCR 0x100 +#define DMCR_HS_EN (1 << 6) +#define DMCR_CHIP_EN (1 << 5) +#define DMCR_SFRST (1 << 4) +#define DMCR_GOSUSP (1 << 3) +#define DMCR_GLINT_EN (1 << 2) +#define DMCR_HALF_SPEED (1 << 1) +#define DMCR_CAP_RMWAKUP (1 << 0) + +/* Device Address Register(0x104) */ +#define FOTG210_DAR 0x104 +#define DAR_AFT_CONF (1 << 7) + +/* Device Test Register(0x108) */ +#define FOTG210_DTR 0x108 +#define DTR_TST_CLRFF (1 << 0) + +/* PHY Test Mode Selector register(0x114) */ +#define FOTG210_PHYTMSR 0x114 +#define PHYTMSR_TST_PKT (1 << 4) +#define PHYTMSR_TST_SE0NAK (1 << 3) +#define PHYTMSR_TST_KSTA (1 << 2) +#define PHYTMSR_TST_JSTA (1 << 1) +#define PHYTMSR_UNPLUG (1 << 0) + +/* Cx configuration and FIFO Empty Status register(0x120) */ +#define FOTG210_DCFESR 0x120 +#define DCFESR_FIFO_EMPTY(fifo) (1 << 8 << (fifo)) +#define DCFESR_CX_EMP (1 << 5) +#define DCFESR_CX_CLR (1 << 3) +#define DCFESR_CX_STL (1 << 2) +#define DCFESR_TST_PKDONE (1 << 1) +#define DCFESR_CX_DONE (1 << 0) + +/* Device IDLE Counter Register(0x124) */ +#define FOTG210_DICR 0x124 + +/* Device Mask of Interrupt Group Register (0x130) */ +#define FOTG210_DMIGR 0x130 +#define DMIGR_MINT_G0 (1 << 0) + +/* Device Mask of Interrupt Source Group 0(0x134) */ +#define FOTG210_DMISGR0 0x134 +#define DMISGR0_MCX_COMEND (1 << 3) +#define DMISGR0_MCX_OUT_INT (1 << 2) +#define DMISGR0_MCX_IN_INT (1 << 1) +#define DMISGR0_MCX_SETUP_INT (1 << 0) + +/* Device Mask of Interrupt Source Group 1 Register(0x138)*/ +#define FOTG210_DMISGR1 0x138 +#define DMISGR1_MF3_IN_INT (1 << 19) +#define DMISGR1_MF2_IN_INT (1 << 18) +#define DMISGR1_MF1_IN_INT (1 << 17) +#define DMISGR1_MF0_IN_INT (1 << 16) +#define DMISGR1_MF_IN_INT(fifo) (1 << (16 + (fifo))) +#define DMISGR1_MF3_SPK_INT (1 << 7) +#define DMISGR1_MF3_OUT_INT (1 << 6) +#define DMISGR1_MF2_SPK_INT (1 << 5) +#define DMISGR1_MF2_OUT_INT (1 << 4) +#define DMISGR1_MF1_SPK_INT (1 << 3) +#define DMISGR1_MF1_OUT_INT (1 << 2) +#define DMISGR1_MF0_SPK_INT (1 << 1) +#define DMISGR1_MF0_OUT_INT (1 << 0) +#define DMISGR1_MF_OUTSPK_INT(fifo) (0x3 << (fifo) * 2) + +/* Device Mask of Interrupt Source Group 2 Register (0x13C) */ +#define FOTG210_DMISGR2 0x13C +#define DMISGR2_MDMA_ERROR (1 << 8) +#define DMISGR2_MDMA_CMPLT (1 << 7) + +/* Device Interrupt group Register (0x140) */ +#define FOTG210_DIGR 0x140 +#define DIGR_INT_G2 (1 << 2) +#define DIGR_INT_G1 (1 << 1) +#define DIGR_INT_G0 (1 << 0) + +/* Device Interrupt Source Group 0 Register (0x144) */ +#define FOTG210_DISGR0 0x144 +#define DISGR0_CX_COMABT_INT (1 << 5) +#define DISGR0_CX_COMFAIL_INT (1 << 4) +#define DISGR0_CX_COMEND_INT (1 << 3) +#define DISGR0_CX_OUT_INT (1 << 2) +#define DISGR0_CX_IN_INT (1 << 1) +#define DISGR0_CX_SETUP_INT (1 << 0) + +/* Device Interrupt Source Group 1 Register (0x148) */ +#define FOTG210_DISGR1 0x148 +#define DISGR1_OUT_INT(fifo) (1 << ((fifo) * 2)) +#define DISGR1_SPK_INT(fifo) (1 << 1 << ((fifo) * 2)) +#define DISGR1_IN_INT(fifo) (1 << 16 << (fifo)) + +/* Device Interrupt Source Group 2 Register (0x14C) */ +#define FOTG210_DISGR2 0x14C +#define DISGR2_DMA_ERROR (1 << 8) +#define DISGR2_DMA_CMPLT (1 << 7) +#define DISGR2_RX0BYTE_INT (1 << 6) +#define DISGR2_TX0BYTE_INT (1 << 5) +#define DISGR2_ISO_SEQ_ABORT_INT (1 << 4) +#define DISGR2_ISO_SEQ_ERR_INT (1 << 3) +#define DISGR2_RESM_INT (1 << 2) +#define DISGR2_SUSP_INT (1 << 1) +#define DISGR2_USBRST_INT (1 << 0) + +/* Device Receive Zero-Length Data Packet Register (0x150)*/ +#define FOTG210_RX0BYTE 0x150 +#define RX0BYTE_EP8 (1 << 7) +#define RX0BYTE_EP7 (1 << 6) +#define RX0BYTE_EP6 (1 << 5) +#define RX0BYTE_EP5 (1 << 4) +#define RX0BYTE_EP4 (1 << 3) +#define RX0BYTE_EP3 (1 << 2) +#define RX0BYTE_EP2 (1 << 1) +#define RX0BYTE_EP1 (1 << 0) + +/* Device Transfer Zero-Length Data Packet Register (0x154)*/ +#define FOTG210_TX0BYTE 0x154 +#define TX0BYTE_EP8 (1 << 7) +#define TX0BYTE_EP7 (1 << 6) +#define TX0BYTE_EP6 (1 << 5) +#define TX0BYTE_EP5 (1 << 4) +#define TX0BYTE_EP4 (1 << 3) +#define TX0BYTE_EP3 (1 << 2) +#define TX0BYTE_EP2 (1 << 1) +#define TX0BYTE_EP1 (1 << 0) + +/* Device IN Endpoint x MaxPacketSize Register(0x160+4*(x-1)) */ +#define FOTG210_INEPMPSR(ep) (0x160 + 4 * ((ep) - 1)) +#define INOUTEPMPSR_MPS(mps) ((mps) & 0x2FF) +#define INOUTEPMPSR_STL_EP (1 << 11) +#define INOUTEPMPSR_RESET_TSEQ (1 << 12) + +/* Device OUT Endpoint x MaxPacketSize Register(0x180+4*(x-1)) */ +#define FOTG210_OUTEPMPSR(ep) (0x180 + 4 * ((ep) - 1)) + +/* Device Endpoint 1~4 Map Register (0x1A0) */ +#define FOTG210_EPMAP 0x1A0 +#define EPMAP_FIFONO(ep, dir) \ + ((((ep) - 1) << ((ep) - 1) * 8) << ((dir) ? 0 : 4)) +#define EPMAP_FIFONOMSK(ep, dir) \ + ((3 << ((ep) - 1) * 8) << ((dir) ? 0 : 4)) + +/* Device FIFO Map Register (0x1A8) */ +#define FOTG210_FIFOMAP 0x1A8 +#define FIFOMAP_DIROUT(fifo) (0x0 << 4 << (fifo) * 8) +#define FIFOMAP_DIRIN(fifo) (0x1 << 4 << (fifo) * 8) +#define FIFOMAP_BIDIR(fifo) (0x2 << 4 << (fifo) * 8) +#define FIFOMAP_NA(fifo) (0x3 << 4 << (fifo) * 8) +#define FIFOMAP_EPNO(ep) ((ep) << ((ep) - 1) * 8) +#define FIFOMAP_EPNOMSK(ep) (0xF << ((ep) - 1) * 8) + +/* Device FIFO Confuguration Register (0x1AC) */ +#define FOTG210_FIFOCF 0x1AC +#define FIFOCF_TYPE(type, fifo) ((type) << (fifo) * 8) +#define FIFOCF_BLK_SIN(fifo) (0x0 << (fifo) * 8 << 2) +#define FIFOCF_BLK_DUB(fifo) (0x1 << (fifo) * 8 << 2) +#define FIFOCF_BLK_TRI(fifo) (0x2 << (fifo) * 8 << 2) +#define FIFOCF_BLKSZ_512(fifo) (0x0 << (fifo) * 8 << 4) +#define FIFOCF_BLKSZ_1024(fifo) (0x1 << (fifo) * 8 << 4) +#define FIFOCF_FIFO_EN(fifo) (0x1 << (fifo) * 8 << 5) + +/* Device FIFO n Instruction and Byte Count Register (0x1B0+4*n) */ +#define FOTG210_FIBCR(fifo) (0x1B0 + (fifo) * 4) +#define FIBCR_BCFX 0x7FF +#define FIBCR_FFRST (1 << 12) + +/* Device DMA Target FIFO Number Register (0x1C0) */ +#define FOTG210_DMATFNR 0x1C0 +#define DMATFNR_ACC_CXF (1 << 4) +#define DMATFNR_ACC_F3 (1 << 3) +#define DMATFNR_ACC_F2 (1 << 2) +#define DMATFNR_ACC_F1 (1 << 1) +#define DMATFNR_ACC_F0 (1 << 0) +#define DMATFNR_ACC_FN(fifo) (1 << (fifo)) +#define DMATFNR_DISDMA 0 + +/* Device DMA Controller Parameter setting 1 Register (0x1C8) */ +#define FOTG210_DMACPSR1 0x1C8 +#define DMACPSR1_DMA_LEN(len) (((len) & 0xFFFF) << 8) +#define DMACPSR1_DMA_ABORT (1 << 3) +#define DMACPSR1_DMA_TYPE(dir_in) (((dir_in) ? 1 : 0) << 1) +#define DMACPSR1_DMA_START (1 << 0) + +/* Device DMA Controller Parameter setting 2 Register (0x1CC) */ +#define FOTG210_DMACPSR2 0x1CC + +/* Device DMA Controller Parameter setting 3 Register (0x1CC) */ +#define FOTG210_CXPORT 0x1D0 + +struct fotg210_request { + struct usb_request req; + struct list_head queue; +}; + +struct fotg210_ep { + struct usb_ep ep; + struct fotg210_udc *fotg210; + + struct list_head queue; + unsigned stall:1; + unsigned wedged:1; + unsigned use_dma:1; + + unsigned char epnum; + unsigned char type; + unsigned char dir_in; + unsigned int maxp; + const struct usb_endpoint_descriptor *desc; +}; + +struct fotg210_udc { + spinlock_t lock; /* protect the struct */ + void __iomem *reg; + + unsigned long irq_trigger; + + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + + struct fotg210_ep *ep[FOTG210_MAX_NUM_EP]; + + struct usb_request *ep0_req; /* for internal request */ + __le16 ep0_data; + u8 ep0_dir; /* 0/0x80 out/in */ + + u8 reenum; /* if re-enumeration */ +}; + +#define gadget_to_fotg210(g) container_of((g), struct fotg210_udc, gadget) diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.c b/drivers/usb/gadget/udc/fsl_qe_udc.c new file mode 100644 index 000000000..72b6d74b3 --- /dev/null +++ b/drivers/usb/gadget/udc/fsl_qe_udc.c @@ -0,0 +1,2726 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * driver/usb/gadget/fsl_qe_udc.c + * + * Copyright (c) 2006-2008 Freescale Semiconductor, Inc. All rights reserved. + * + * Xie Xiaobo <X.Xie@freescale.com> + * Li Yang <leoli@freescale.com> + * Based on bareboard code from Shlomi Gridish. + * + * Description: + * Freescle QE/CPM USB Pheripheral Controller Driver + * The controller can be found on MPC8360, MPC8272, and etc. + * MPC8360 Rev 1.1 may need QE mircocode update + */ + +#undef USB_TRACE + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/moduleparam.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/dma-mapping.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/otg.h> +#include <soc/fsl/qe/qe.h> +#include <asm/cpm.h> +#include <asm/dma.h> +#include <asm/reg.h> +#include "fsl_qe_udc.h" + +#define DRIVER_DESC "Freescale QE/CPM USB Device Controller driver" +#define DRIVER_AUTHOR "Xie XiaoBo" +#define DRIVER_VERSION "1.0" + +#define DMA_ADDR_INVALID (~(dma_addr_t)0) + +static const char driver_name[] = "fsl_qe_udc"; +static const char driver_desc[] = DRIVER_DESC; + +/*ep name is important in gadget, it should obey the convention of ep_match()*/ +static const char *const ep_name[] = { + "ep0-control", /* everyone has ep0 */ + /* 3 configurable endpoints */ + "ep1", + "ep2", + "ep3", +}; + +static const struct usb_endpoint_descriptor qe_ep0_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = 0, + .bmAttributes = USB_ENDPOINT_XFER_CONTROL, + .wMaxPacketSize = USB_MAX_CTRL_PAYLOAD, +}; + +/******************************************************************** + * Internal Used Function Start +********************************************************************/ +/*----------------------------------------------------------------- + * done() - retire a request; caller blocked irqs + *--------------------------------------------------------------*/ +static void done(struct qe_ep *ep, struct qe_req *req, int status) +{ + struct qe_udc *udc = ep->udc; + unsigned char stopped = ep->stopped; + + /* the req->queue pointer is used by ep_queue() func, in which + * the request will be added into a udc_ep->queue 'd tail + * so here the req will be dropped from the ep->queue + */ + list_del_init(&req->queue); + + /* req.status should be set as -EINPROGRESS in ep_queue() */ + if (req->req.status == -EINPROGRESS) + req->req.status = status; + else + status = req->req.status; + + if (req->mapped) { + dma_unmap_single(udc->gadget.dev.parent, + req->req.dma, req->req.length, + ep_is_in(ep) + ? DMA_TO_DEVICE + : DMA_FROM_DEVICE); + req->req.dma = DMA_ADDR_INVALID; + req->mapped = 0; + } else + dma_sync_single_for_cpu(udc->gadget.dev.parent, + req->req.dma, req->req.length, + ep_is_in(ep) + ? DMA_TO_DEVICE + : DMA_FROM_DEVICE); + + if (status && (status != -ESHUTDOWN)) + dev_vdbg(udc->dev, "complete %s req %p stat %d len %u/%u\n", + ep->ep.name, &req->req, status, + req->req.actual, req->req.length); + + /* don't modify queue heads during completion callback */ + ep->stopped = 1; + spin_unlock(&udc->lock); + + usb_gadget_giveback_request(&ep->ep, &req->req); + + spin_lock(&udc->lock); + + ep->stopped = stopped; +} + +/*----------------------------------------------------------------- + * nuke(): delete all requests related to this ep + *--------------------------------------------------------------*/ +static void nuke(struct qe_ep *ep, int status) +{ + /* Whether this eq has request linked */ + while (!list_empty(&ep->queue)) { + struct qe_req *req = NULL; + req = list_entry(ep->queue.next, struct qe_req, queue); + + done(ep, req, status); + } +} + +/*---------------------------------------------------------------------------* + * USB and Endpoint manipulate process, include parameter and register * + *---------------------------------------------------------------------------*/ +/* @value: 1--set stall 0--clean stall */ +static int qe_eprx_stall_change(struct qe_ep *ep, int value) +{ + u16 tem_usep; + u8 epnum = ep->epnum; + struct qe_udc *udc = ep->udc; + + tem_usep = in_be16(&udc->usb_regs->usb_usep[epnum]); + tem_usep = tem_usep & ~USB_RHS_MASK; + if (value == 1) + tem_usep |= USB_RHS_STALL; + else if (ep->dir == USB_DIR_IN) + tem_usep |= USB_RHS_IGNORE_OUT; + + out_be16(&udc->usb_regs->usb_usep[epnum], tem_usep); + return 0; +} + +static int qe_eptx_stall_change(struct qe_ep *ep, int value) +{ + u16 tem_usep; + u8 epnum = ep->epnum; + struct qe_udc *udc = ep->udc; + + tem_usep = in_be16(&udc->usb_regs->usb_usep[epnum]); + tem_usep = tem_usep & ~USB_THS_MASK; + if (value == 1) + tem_usep |= USB_THS_STALL; + else if (ep->dir == USB_DIR_OUT) + tem_usep |= USB_THS_IGNORE_IN; + + out_be16(&udc->usb_regs->usb_usep[epnum], tem_usep); + + return 0; +} + +static int qe_ep0_stall(struct qe_udc *udc) +{ + qe_eptx_stall_change(&udc->eps[0], 1); + qe_eprx_stall_change(&udc->eps[0], 1); + udc->ep0_state = WAIT_FOR_SETUP; + udc->ep0_dir = 0; + return 0; +} + +static int qe_eprx_nack(struct qe_ep *ep) +{ + u8 epnum = ep->epnum; + struct qe_udc *udc = ep->udc; + + if (ep->state == EP_STATE_IDLE) { + /* Set the ep's nack */ + clrsetbits_be16(&udc->usb_regs->usb_usep[epnum], + USB_RHS_MASK, USB_RHS_NACK); + + /* Mask Rx and Busy interrupts */ + clrbits16(&udc->usb_regs->usb_usbmr, + (USB_E_RXB_MASK | USB_E_BSY_MASK)); + + ep->state = EP_STATE_NACK; + } + return 0; +} + +static int qe_eprx_normal(struct qe_ep *ep) +{ + struct qe_udc *udc = ep->udc; + + if (ep->state == EP_STATE_NACK) { + clrsetbits_be16(&udc->usb_regs->usb_usep[ep->epnum], + USB_RTHS_MASK, USB_THS_IGNORE_IN); + + /* Unmask RX interrupts */ + out_be16(&udc->usb_regs->usb_usber, + USB_E_BSY_MASK | USB_E_RXB_MASK); + setbits16(&udc->usb_regs->usb_usbmr, + (USB_E_RXB_MASK | USB_E_BSY_MASK)); + + ep->state = EP_STATE_IDLE; + ep->has_data = 0; + } + + return 0; +} + +static int qe_ep_cmd_stoptx(struct qe_ep *ep) +{ + if (ep->udc->soc_type == PORT_CPM) + cpm_command(CPM_USB_STOP_TX | (ep->epnum << CPM_USB_EP_SHIFT), + CPM_USB_STOP_TX_OPCODE); + else + qe_issue_cmd(QE_USB_STOP_TX, QE_CR_SUBBLOCK_USB, + ep->epnum, 0); + + return 0; +} + +static int qe_ep_cmd_restarttx(struct qe_ep *ep) +{ + if (ep->udc->soc_type == PORT_CPM) + cpm_command(CPM_USB_RESTART_TX | (ep->epnum << + CPM_USB_EP_SHIFT), CPM_USB_RESTART_TX_OPCODE); + else + qe_issue_cmd(QE_USB_RESTART_TX, QE_CR_SUBBLOCK_USB, + ep->epnum, 0); + + return 0; +} + +static int qe_ep_flushtxfifo(struct qe_ep *ep) +{ + struct qe_udc *udc = ep->udc; + int i; + + i = (int)ep->epnum; + + qe_ep_cmd_stoptx(ep); + out_8(&udc->usb_regs->usb_uscom, + USB_CMD_FLUSH_FIFO | (USB_CMD_EP_MASK & (ep->epnum))); + out_be16(&udc->ep_param[i]->tbptr, in_be16(&udc->ep_param[i]->tbase)); + out_be32(&udc->ep_param[i]->tstate, 0); + out_be16(&udc->ep_param[i]->tbcnt, 0); + + ep->c_txbd = ep->txbase; + ep->n_txbd = ep->txbase; + qe_ep_cmd_restarttx(ep); + return 0; +} + +static int qe_ep_filltxfifo(struct qe_ep *ep) +{ + struct qe_udc *udc = ep->udc; + + out_8(&udc->usb_regs->usb_uscom, + USB_CMD_STR_FIFO | (USB_CMD_EP_MASK & (ep->epnum))); + return 0; +} + +static int qe_epbds_reset(struct qe_udc *udc, int pipe_num) +{ + struct qe_ep *ep; + u32 bdring_len; + struct qe_bd __iomem *bd; + int i; + + ep = &udc->eps[pipe_num]; + + if (ep->dir == USB_DIR_OUT) + bdring_len = USB_BDRING_LEN_RX; + else + bdring_len = USB_BDRING_LEN; + + bd = ep->rxbase; + for (i = 0; i < (bdring_len - 1); i++) { + out_be32((u32 __iomem *)bd, R_E | R_I); + bd++; + } + out_be32((u32 __iomem *)bd, R_E | R_I | R_W); + + bd = ep->txbase; + for (i = 0; i < USB_BDRING_LEN_TX - 1; i++) { + out_be32(&bd->buf, 0); + out_be32((u32 __iomem *)bd, 0); + bd++; + } + out_be32((u32 __iomem *)bd, T_W); + + return 0; +} + +static int qe_ep_reset(struct qe_udc *udc, int pipe_num) +{ + struct qe_ep *ep; + u16 tmpusep; + + ep = &udc->eps[pipe_num]; + tmpusep = in_be16(&udc->usb_regs->usb_usep[pipe_num]); + tmpusep &= ~USB_RTHS_MASK; + + switch (ep->dir) { + case USB_DIR_BOTH: + qe_ep_flushtxfifo(ep); + break; + case USB_DIR_OUT: + tmpusep |= USB_THS_IGNORE_IN; + break; + case USB_DIR_IN: + qe_ep_flushtxfifo(ep); + tmpusep |= USB_RHS_IGNORE_OUT; + break; + default: + break; + } + out_be16(&udc->usb_regs->usb_usep[pipe_num], tmpusep); + + qe_epbds_reset(udc, pipe_num); + + return 0; +} + +static int qe_ep_toggledata01(struct qe_ep *ep) +{ + ep->data01 ^= 0x1; + return 0; +} + +static int qe_ep_bd_init(struct qe_udc *udc, unsigned char pipe_num) +{ + struct qe_ep *ep = &udc->eps[pipe_num]; + unsigned long tmp_addr = 0; + struct usb_ep_para __iomem *epparam; + int i; + struct qe_bd __iomem *bd; + int bdring_len; + + if (ep->dir == USB_DIR_OUT) + bdring_len = USB_BDRING_LEN_RX; + else + bdring_len = USB_BDRING_LEN; + + epparam = udc->ep_param[pipe_num]; + /* alloc multi-ram for BD rings and set the ep parameters */ + tmp_addr = cpm_muram_alloc(sizeof(struct qe_bd) * (bdring_len + + USB_BDRING_LEN_TX), QE_ALIGNMENT_OF_BD); + if (IS_ERR_VALUE(tmp_addr)) + return -ENOMEM; + + out_be16(&epparam->rbase, (u16)tmp_addr); + out_be16(&epparam->tbase, (u16)(tmp_addr + + (sizeof(struct qe_bd) * bdring_len))); + + out_be16(&epparam->rbptr, in_be16(&epparam->rbase)); + out_be16(&epparam->tbptr, in_be16(&epparam->tbase)); + + ep->rxbase = cpm_muram_addr(tmp_addr); + ep->txbase = cpm_muram_addr(tmp_addr + (sizeof(struct qe_bd) + * bdring_len)); + ep->n_rxbd = ep->rxbase; + ep->e_rxbd = ep->rxbase; + ep->n_txbd = ep->txbase; + ep->c_txbd = ep->txbase; + ep->data01 = 0; /* data0 */ + + /* Init TX and RX bds */ + bd = ep->rxbase; + for (i = 0; i < bdring_len - 1; i++) { + out_be32(&bd->buf, 0); + out_be32((u32 __iomem *)bd, 0); + bd++; + } + out_be32(&bd->buf, 0); + out_be32((u32 __iomem *)bd, R_W); + + bd = ep->txbase; + for (i = 0; i < USB_BDRING_LEN_TX - 1; i++) { + out_be32(&bd->buf, 0); + out_be32((u32 __iomem *)bd, 0); + bd++; + } + out_be32(&bd->buf, 0); + out_be32((u32 __iomem *)bd, T_W); + + return 0; +} + +static int qe_ep_rxbd_update(struct qe_ep *ep) +{ + unsigned int size; + int i; + unsigned int tmp; + struct qe_bd __iomem *bd; + unsigned int bdring_len; + + if (ep->rxbase == NULL) + return -EINVAL; + + bd = ep->rxbase; + + ep->rxframe = kmalloc(sizeof(*ep->rxframe), GFP_ATOMIC); + if (!ep->rxframe) + return -ENOMEM; + + qe_frame_init(ep->rxframe); + + if (ep->dir == USB_DIR_OUT) + bdring_len = USB_BDRING_LEN_RX; + else + bdring_len = USB_BDRING_LEN; + + size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) * (bdring_len + 1); + ep->rxbuffer = kzalloc(size, GFP_ATOMIC); + if (!ep->rxbuffer) { + kfree(ep->rxframe); + return -ENOMEM; + } + + ep->rxbuf_d = virt_to_phys((void *)ep->rxbuffer); + if (ep->rxbuf_d == DMA_ADDR_INVALID) { + ep->rxbuf_d = dma_map_single(ep->udc->gadget.dev.parent, + ep->rxbuffer, + size, + DMA_FROM_DEVICE); + ep->rxbufmap = 1; + } else { + dma_sync_single_for_device(ep->udc->gadget.dev.parent, + ep->rxbuf_d, size, + DMA_FROM_DEVICE); + ep->rxbufmap = 0; + } + + size = ep->ep.maxpacket + USB_CRC_SIZE + 2; + tmp = ep->rxbuf_d; + tmp = (u32)(((tmp >> 2) << 2) + 4); + + for (i = 0; i < bdring_len - 1; i++) { + out_be32(&bd->buf, tmp); + out_be32((u32 __iomem *)bd, (R_E | R_I)); + tmp = tmp + size; + bd++; + } + out_be32(&bd->buf, tmp); + out_be32((u32 __iomem *)bd, (R_E | R_I | R_W)); + + return 0; +} + +static int qe_ep_register_init(struct qe_udc *udc, unsigned char pipe_num) +{ + struct qe_ep *ep = &udc->eps[pipe_num]; + struct usb_ep_para __iomem *epparam; + u16 usep, logepnum; + u16 tmp; + u8 rtfcr = 0; + + epparam = udc->ep_param[pipe_num]; + + usep = 0; + logepnum = (ep->ep.desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); + usep |= (logepnum << USB_EPNUM_SHIFT); + + switch (ep->ep.desc->bmAttributes & 0x03) { + case USB_ENDPOINT_XFER_BULK: + usep |= USB_TRANS_BULK; + break; + case USB_ENDPOINT_XFER_ISOC: + usep |= USB_TRANS_ISO; + break; + case USB_ENDPOINT_XFER_INT: + usep |= USB_TRANS_INT; + break; + default: + usep |= USB_TRANS_CTR; + break; + } + + switch (ep->dir) { + case USB_DIR_OUT: + usep |= USB_THS_IGNORE_IN; + break; + case USB_DIR_IN: + usep |= USB_RHS_IGNORE_OUT; + break; + default: + break; + } + out_be16(&udc->usb_regs->usb_usep[pipe_num], usep); + + rtfcr = 0x30; + out_8(&epparam->rbmr, rtfcr); + out_8(&epparam->tbmr, rtfcr); + + tmp = (u16)(ep->ep.maxpacket + USB_CRC_SIZE); + /* MRBLR must be divisble by 4 */ + tmp = (u16)(((tmp >> 2) << 2) + 4); + out_be16(&epparam->mrblr, tmp); + + return 0; +} + +static int qe_ep_init(struct qe_udc *udc, + unsigned char pipe_num, + const struct usb_endpoint_descriptor *desc) +{ + struct qe_ep *ep = &udc->eps[pipe_num]; + unsigned long flags; + int reval = 0; + u16 max = 0; + + max = usb_endpoint_maxp(desc); + + /* check the max package size validate for this endpoint */ + /* Refer to USB2.0 spec table 9-13, + */ + if (pipe_num != 0) { + switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { + case USB_ENDPOINT_XFER_BULK: + if (strstr(ep->ep.name, "-iso") + || strstr(ep->ep.name, "-int")) + goto en_done; + switch (udc->gadget.speed) { + case USB_SPEED_HIGH: + if ((max == 128) || (max == 256) || (max == 512)) + break; + fallthrough; + default: + switch (max) { + case 4: + case 8: + case 16: + case 32: + case 64: + break; + default: + case USB_SPEED_LOW: + goto en_done; + } + } + break; + case USB_ENDPOINT_XFER_INT: + if (strstr(ep->ep.name, "-iso")) /* bulk is ok */ + goto en_done; + switch (udc->gadget.speed) { + case USB_SPEED_HIGH: + if (max <= 1024) + break; + fallthrough; + case USB_SPEED_FULL: + if (max <= 64) + break; + fallthrough; + default: + if (max <= 8) + break; + goto en_done; + } + break; + case USB_ENDPOINT_XFER_ISOC: + if (strstr(ep->ep.name, "-bulk") + || strstr(ep->ep.name, "-int")) + goto en_done; + switch (udc->gadget.speed) { + case USB_SPEED_HIGH: + if (max <= 1024) + break; + fallthrough; + case USB_SPEED_FULL: + if (max <= 1023) + break; + fallthrough; + default: + goto en_done; + } + break; + case USB_ENDPOINT_XFER_CONTROL: + if (strstr(ep->ep.name, "-iso") + || strstr(ep->ep.name, "-int")) + goto en_done; + switch (udc->gadget.speed) { + case USB_SPEED_HIGH: + case USB_SPEED_FULL: + switch (max) { + case 1: + case 2: + case 4: + case 8: + case 16: + case 32: + case 64: + break; + default: + goto en_done; + } + fallthrough; + case USB_SPEED_LOW: + switch (max) { + case 1: + case 2: + case 4: + case 8: + break; + default: + goto en_done; + } + default: + goto en_done; + } + break; + + default: + goto en_done; + } + } /* if ep0*/ + + spin_lock_irqsave(&udc->lock, flags); + + /* initialize ep structure */ + ep->ep.maxpacket = max; + ep->tm = (u8)(desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK); + ep->ep.desc = desc; + ep->stopped = 0; + ep->init = 1; + + if (pipe_num == 0) { + ep->dir = USB_DIR_BOTH; + udc->ep0_dir = USB_DIR_OUT; + udc->ep0_state = WAIT_FOR_SETUP; + } else { + switch (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) { + case USB_DIR_OUT: + ep->dir = USB_DIR_OUT; + break; + case USB_DIR_IN: + ep->dir = USB_DIR_IN; + default: + break; + } + } + + /* hardware special operation */ + qe_ep_bd_init(udc, pipe_num); + if ((ep->tm == USBP_TM_CTL) || (ep->dir == USB_DIR_OUT)) { + reval = qe_ep_rxbd_update(ep); + if (reval) + goto en_done1; + } + + if ((ep->tm == USBP_TM_CTL) || (ep->dir == USB_DIR_IN)) { + ep->txframe = kmalloc(sizeof(*ep->txframe), GFP_ATOMIC); + if (!ep->txframe) + goto en_done2; + qe_frame_init(ep->txframe); + } + + qe_ep_register_init(udc, pipe_num); + + /* Now HW will be NAKing transfers to that EP, + * until a buffer is queued to it. */ + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +en_done2: + kfree(ep->rxbuffer); + kfree(ep->rxframe); +en_done1: + spin_unlock_irqrestore(&udc->lock, flags); +en_done: + dev_err(udc->dev, "failed to initialize %s\n", ep->ep.name); + return -ENODEV; +} + +static inline void qe_usb_enable(struct qe_udc *udc) +{ + setbits8(&udc->usb_regs->usb_usmod, USB_MODE_EN); +} + +static inline void qe_usb_disable(struct qe_udc *udc) +{ + clrbits8(&udc->usb_regs->usb_usmod, USB_MODE_EN); +} + +/*----------------------------------------------------------------------------* + * USB and EP basic manipulate function end * + *----------------------------------------------------------------------------*/ + + +/****************************************************************************** + UDC transmit and receive process + ******************************************************************************/ +static void recycle_one_rxbd(struct qe_ep *ep) +{ + u32 bdstatus; + + bdstatus = in_be32((u32 __iomem *)ep->e_rxbd); + bdstatus = R_I | R_E | (bdstatus & R_W); + out_be32((u32 __iomem *)ep->e_rxbd, bdstatus); + + if (bdstatus & R_W) + ep->e_rxbd = ep->rxbase; + else + ep->e_rxbd++; +} + +static void recycle_rxbds(struct qe_ep *ep, unsigned char stopatnext) +{ + u32 bdstatus; + struct qe_bd __iomem *bd, *nextbd; + unsigned char stop = 0; + + nextbd = ep->n_rxbd; + bd = ep->e_rxbd; + bdstatus = in_be32((u32 __iomem *)bd); + + while (!(bdstatus & R_E) && !(bdstatus & BD_LENGTH_MASK) && !stop) { + bdstatus = R_E | R_I | (bdstatus & R_W); + out_be32((u32 __iomem *)bd, bdstatus); + + if (bdstatus & R_W) + bd = ep->rxbase; + else + bd++; + + bdstatus = in_be32((u32 __iomem *)bd); + if (stopatnext && (bd == nextbd)) + stop = 1; + } + + ep->e_rxbd = bd; +} + +static void ep_recycle_rxbds(struct qe_ep *ep) +{ + struct qe_bd __iomem *bd = ep->n_rxbd; + u32 bdstatus; + u8 epnum = ep->epnum; + struct qe_udc *udc = ep->udc; + + bdstatus = in_be32((u32 __iomem *)bd); + if (!(bdstatus & R_E) && !(bdstatus & BD_LENGTH_MASK)) { + bd = ep->rxbase + + ((in_be16(&udc->ep_param[epnum]->rbptr) - + in_be16(&udc->ep_param[epnum]->rbase)) + >> 3); + bdstatus = in_be32((u32 __iomem *)bd); + + if (bdstatus & R_W) + bd = ep->rxbase; + else + bd++; + + ep->e_rxbd = bd; + recycle_rxbds(ep, 0); + ep->e_rxbd = ep->n_rxbd; + } else + recycle_rxbds(ep, 1); + + if (in_be16(&udc->usb_regs->usb_usber) & USB_E_BSY_MASK) + out_be16(&udc->usb_regs->usb_usber, USB_E_BSY_MASK); + + if (ep->has_data <= 0 && (!list_empty(&ep->queue))) + qe_eprx_normal(ep); + + ep->localnack = 0; +} + +static void setup_received_handle(struct qe_udc *udc, + struct usb_ctrlrequest *setup); +static int qe_ep_rxframe_handle(struct qe_ep *ep); +static void ep0_req_complete(struct qe_udc *udc, struct qe_req *req); +/* when BD PID is setup, handle the packet */ +static int ep0_setup_handle(struct qe_udc *udc) +{ + struct qe_ep *ep = &udc->eps[0]; + struct qe_frame *pframe; + unsigned int fsize; + u8 *cp; + + pframe = ep->rxframe; + if ((frame_get_info(pframe) & PID_SETUP) + && (udc->ep0_state == WAIT_FOR_SETUP)) { + fsize = frame_get_length(pframe); + if (unlikely(fsize != 8)) + return -EINVAL; + cp = (u8 *)&udc->local_setup_buff; + memcpy(cp, pframe->data, fsize); + ep->data01 = 1; + + /* handle the usb command base on the usb_ctrlrequest */ + setup_received_handle(udc, &udc->local_setup_buff); + return 0; + } + return -EINVAL; +} + +static int qe_ep0_rx(struct qe_udc *udc) +{ + struct qe_ep *ep = &udc->eps[0]; + struct qe_frame *pframe; + struct qe_bd __iomem *bd; + u32 bdstatus, length; + u32 vaddr; + + pframe = ep->rxframe; + + if (ep->dir == USB_DIR_IN) { + dev_err(udc->dev, "ep0 not a control endpoint\n"); + return -EINVAL; + } + + bd = ep->n_rxbd; + bdstatus = in_be32((u32 __iomem *)bd); + length = bdstatus & BD_LENGTH_MASK; + + while (!(bdstatus & R_E) && length) { + if ((bdstatus & R_F) && (bdstatus & R_L) + && !(bdstatus & R_ERROR)) { + if (length == USB_CRC_SIZE) { + udc->ep0_state = WAIT_FOR_SETUP; + dev_vdbg(udc->dev, + "receive a ZLP in status phase\n"); + } else { + qe_frame_clean(pframe); + vaddr = (u32)phys_to_virt(in_be32(&bd->buf)); + frame_set_data(pframe, (u8 *)vaddr); + frame_set_length(pframe, + (length - USB_CRC_SIZE)); + frame_set_status(pframe, FRAME_OK); + switch (bdstatus & R_PID) { + case R_PID_SETUP: + frame_set_info(pframe, PID_SETUP); + break; + case R_PID_DATA1: + frame_set_info(pframe, PID_DATA1); + break; + default: + frame_set_info(pframe, PID_DATA0); + break; + } + + if ((bdstatus & R_PID) == R_PID_SETUP) + ep0_setup_handle(udc); + else + qe_ep_rxframe_handle(ep); + } + } else { + dev_err(udc->dev, "The receive frame with error!\n"); + } + + /* note: don't clear the rxbd's buffer address */ + recycle_one_rxbd(ep); + + /* Get next BD */ + if (bdstatus & R_W) + bd = ep->rxbase; + else + bd++; + + bdstatus = in_be32((u32 __iomem *)bd); + length = bdstatus & BD_LENGTH_MASK; + + } + + ep->n_rxbd = bd; + + return 0; +} + +static int qe_ep_rxframe_handle(struct qe_ep *ep) +{ + struct qe_frame *pframe; + u8 framepid = 0; + unsigned int fsize; + u8 *cp; + struct qe_req *req; + + pframe = ep->rxframe; + + if (frame_get_info(pframe) & PID_DATA1) + framepid = 0x1; + + if (framepid != ep->data01) { + dev_err(ep->udc->dev, "the data01 error!\n"); + return -EIO; + } + + fsize = frame_get_length(pframe); + if (list_empty(&ep->queue)) { + dev_err(ep->udc->dev, "the %s have no requeue!\n", ep->name); + } else { + req = list_entry(ep->queue.next, struct qe_req, queue); + + cp = (u8 *)(req->req.buf) + req->req.actual; + if (cp) { + memcpy(cp, pframe->data, fsize); + req->req.actual += fsize; + if ((fsize < ep->ep.maxpacket) || + (req->req.actual >= req->req.length)) { + if (ep->epnum == 0) + ep0_req_complete(ep->udc, req); + else + done(ep, req, 0); + if (list_empty(&ep->queue) && ep->epnum != 0) + qe_eprx_nack(ep); + } + } + } + + qe_ep_toggledata01(ep); + + return 0; +} + +static void ep_rx_tasklet(struct tasklet_struct *t) +{ + struct qe_udc *udc = from_tasklet(udc, t, rx_tasklet); + struct qe_ep *ep; + struct qe_frame *pframe; + struct qe_bd __iomem *bd; + unsigned long flags; + u32 bdstatus, length; + u32 vaddr, i; + + spin_lock_irqsave(&udc->lock, flags); + + for (i = 1; i < USB_MAX_ENDPOINTS; i++) { + ep = &udc->eps[i]; + + if (ep->dir == USB_DIR_IN || ep->enable_tasklet == 0) { + dev_dbg(udc->dev, + "This is a transmit ep or disable tasklet!\n"); + continue; + } + + pframe = ep->rxframe; + bd = ep->n_rxbd; + bdstatus = in_be32((u32 __iomem *)bd); + length = bdstatus & BD_LENGTH_MASK; + + while (!(bdstatus & R_E) && length) { + if (list_empty(&ep->queue)) { + qe_eprx_nack(ep); + dev_dbg(udc->dev, + "The rxep have noreq %d\n", + ep->has_data); + break; + } + + if ((bdstatus & R_F) && (bdstatus & R_L) + && !(bdstatus & R_ERROR)) { + qe_frame_clean(pframe); + vaddr = (u32)phys_to_virt(in_be32(&bd->buf)); + frame_set_data(pframe, (u8 *)vaddr); + frame_set_length(pframe, + (length - USB_CRC_SIZE)); + frame_set_status(pframe, FRAME_OK); + switch (bdstatus & R_PID) { + case R_PID_DATA1: + frame_set_info(pframe, PID_DATA1); + break; + case R_PID_SETUP: + frame_set_info(pframe, PID_SETUP); + break; + default: + frame_set_info(pframe, PID_DATA0); + break; + } + /* handle the rx frame */ + qe_ep_rxframe_handle(ep); + } else { + dev_err(udc->dev, + "error in received frame\n"); + } + /* note: don't clear the rxbd's buffer address */ + /*clear the length */ + out_be32((u32 __iomem *)bd, bdstatus & BD_STATUS_MASK); + ep->has_data--; + if (!(ep->localnack)) + recycle_one_rxbd(ep); + + /* Get next BD */ + if (bdstatus & R_W) + bd = ep->rxbase; + else + bd++; + + bdstatus = in_be32((u32 __iomem *)bd); + length = bdstatus & BD_LENGTH_MASK; + } + + ep->n_rxbd = bd; + + if (ep->localnack) + ep_recycle_rxbds(ep); + + ep->enable_tasklet = 0; + } /* for i=1 */ + + spin_unlock_irqrestore(&udc->lock, flags); +} + +static int qe_ep_rx(struct qe_ep *ep) +{ + struct qe_udc *udc; + struct qe_frame *pframe; + struct qe_bd __iomem *bd; + u16 swoffs, ucoffs, emptybds; + + udc = ep->udc; + pframe = ep->rxframe; + + if (ep->dir == USB_DIR_IN) { + dev_err(udc->dev, "transmit ep in rx function\n"); + return -EINVAL; + } + + bd = ep->n_rxbd; + + swoffs = (u16)(bd - ep->rxbase); + ucoffs = (u16)((in_be16(&udc->ep_param[ep->epnum]->rbptr) - + in_be16(&udc->ep_param[ep->epnum]->rbase)) >> 3); + if (swoffs < ucoffs) + emptybds = USB_BDRING_LEN_RX - ucoffs + swoffs; + else + emptybds = swoffs - ucoffs; + + if (emptybds < MIN_EMPTY_BDS) { + qe_eprx_nack(ep); + ep->localnack = 1; + dev_vdbg(udc->dev, "%d empty bds, send NACK\n", emptybds); + } + ep->has_data = USB_BDRING_LEN_RX - emptybds; + + if (list_empty(&ep->queue)) { + qe_eprx_nack(ep); + dev_vdbg(udc->dev, "The rxep have no req queued with %d BDs\n", + ep->has_data); + return 0; + } + + tasklet_schedule(&udc->rx_tasklet); + ep->enable_tasklet = 1; + + return 0; +} + +/* send data from a frame, no matter what tx_req */ +static int qe_ep_tx(struct qe_ep *ep, struct qe_frame *frame) +{ + struct qe_udc *udc = ep->udc; + struct qe_bd __iomem *bd; + u16 saveusbmr; + u32 bdstatus, pidmask; + u32 paddr; + + if (ep->dir == USB_DIR_OUT) { + dev_err(udc->dev, "receive ep passed to tx function\n"); + return -EINVAL; + } + + /* Disable the Tx interrupt */ + saveusbmr = in_be16(&udc->usb_regs->usb_usbmr); + out_be16(&udc->usb_regs->usb_usbmr, + saveusbmr & ~(USB_E_TXB_MASK | USB_E_TXE_MASK)); + + bd = ep->n_txbd; + bdstatus = in_be32((u32 __iomem *)bd); + + if (!(bdstatus & (T_R | BD_LENGTH_MASK))) { + if (frame_get_length(frame) == 0) { + frame_set_data(frame, udc->nullbuf); + frame_set_length(frame, 2); + frame->info |= (ZLP | NO_CRC); + dev_vdbg(udc->dev, "the frame size = 0\n"); + } + paddr = virt_to_phys((void *)frame->data); + out_be32(&bd->buf, paddr); + bdstatus = (bdstatus&T_W); + if (!(frame_get_info(frame) & NO_CRC)) + bdstatus |= T_R | T_I | T_L | T_TC + | frame_get_length(frame); + else + bdstatus |= T_R | T_I | T_L | frame_get_length(frame); + + /* if the packet is a ZLP in status phase */ + if ((ep->epnum == 0) && (udc->ep0_state == DATA_STATE_NEED_ZLP)) + ep->data01 = 0x1; + + if (ep->data01) { + pidmask = T_PID_DATA1; + frame->info |= PID_DATA1; + } else { + pidmask = T_PID_DATA0; + frame->info |= PID_DATA0; + } + bdstatus |= T_CNF; + bdstatus |= pidmask; + out_be32((u32 __iomem *)bd, bdstatus); + qe_ep_filltxfifo(ep); + + /* enable the TX interrupt */ + out_be16(&udc->usb_regs->usb_usbmr, saveusbmr); + + qe_ep_toggledata01(ep); + if (bdstatus & T_W) + ep->n_txbd = ep->txbase; + else + ep->n_txbd++; + + return 0; + } else { + out_be16(&udc->usb_regs->usb_usbmr, saveusbmr); + dev_vdbg(udc->dev, "The tx bd is not ready!\n"); + return -EBUSY; + } +} + +/* when a bd was transmitted, the function can + * handle the tx_req, not include ep0 */ +static int txcomplete(struct qe_ep *ep, unsigned char restart) +{ + if (ep->tx_req != NULL) { + struct qe_req *req = ep->tx_req; + unsigned zlp = 0, last_len = 0; + + last_len = min_t(unsigned, req->req.length - ep->sent, + ep->ep.maxpacket); + + if (!restart) { + int asent = ep->last; + ep->sent += asent; + ep->last -= asent; + } else { + ep->last = 0; + } + + /* zlp needed when req->re.zero is set */ + if (req->req.zero) { + if (last_len == 0 || + (req->req.length % ep->ep.maxpacket) != 0) + zlp = 0; + else + zlp = 1; + } else + zlp = 0; + + /* a request already were transmitted completely */ + if (((ep->tx_req->req.length - ep->sent) <= 0) && !zlp) { + done(ep, ep->tx_req, 0); + ep->tx_req = NULL; + ep->last = 0; + ep->sent = 0; + } + } + + /* we should gain a new tx_req fot this endpoint */ + if (ep->tx_req == NULL) { + if (!list_empty(&ep->queue)) { + ep->tx_req = list_entry(ep->queue.next, struct qe_req, + queue); + ep->last = 0; + ep->sent = 0; + } + } + + return 0; +} + +/* give a frame and a tx_req, send some data */ +static int qe_usb_senddata(struct qe_ep *ep, struct qe_frame *frame) +{ + unsigned int size; + u8 *buf; + + qe_frame_clean(frame); + size = min_t(u32, (ep->tx_req->req.length - ep->sent), + ep->ep.maxpacket); + buf = (u8 *)ep->tx_req->req.buf + ep->sent; + if (buf && size) { + ep->last = size; + ep->tx_req->req.actual += size; + frame_set_data(frame, buf); + frame_set_length(frame, size); + frame_set_status(frame, FRAME_OK); + frame_set_info(frame, 0); + return qe_ep_tx(ep, frame); + } + return -EIO; +} + +/* give a frame struct,send a ZLP */ +static int sendnulldata(struct qe_ep *ep, struct qe_frame *frame, uint infor) +{ + struct qe_udc *udc = ep->udc; + + if (frame == NULL) + return -ENODEV; + + qe_frame_clean(frame); + frame_set_data(frame, (u8 *)udc->nullbuf); + frame_set_length(frame, 2); + frame_set_status(frame, FRAME_OK); + frame_set_info(frame, (ZLP | NO_CRC | infor)); + + return qe_ep_tx(ep, frame); +} + +static int frame_create_tx(struct qe_ep *ep, struct qe_frame *frame) +{ + struct qe_req *req = ep->tx_req; + int reval; + + if (req == NULL) + return -ENODEV; + + if ((req->req.length - ep->sent) > 0) + reval = qe_usb_senddata(ep, frame); + else + reval = sendnulldata(ep, frame, 0); + + return reval; +} + +/* if direction is DIR_IN, the status is Device->Host + * if direction is DIR_OUT, the status transaction is Device<-Host + * in status phase, udc create a request and gain status */ +static int ep0_prime_status(struct qe_udc *udc, int direction) +{ + + struct qe_ep *ep = &udc->eps[0]; + + if (direction == USB_DIR_IN) { + udc->ep0_state = DATA_STATE_NEED_ZLP; + udc->ep0_dir = USB_DIR_IN; + sendnulldata(ep, ep->txframe, SETUP_STATUS | NO_REQ); + } else { + udc->ep0_dir = USB_DIR_OUT; + udc->ep0_state = WAIT_FOR_OUT_STATUS; + } + + return 0; +} + +/* a request complete in ep0, whether gadget request or udc request */ +static void ep0_req_complete(struct qe_udc *udc, struct qe_req *req) +{ + struct qe_ep *ep = &udc->eps[0]; + /* because usb and ep's status already been set in ch9setaddress() */ + + switch (udc->ep0_state) { + case DATA_STATE_XMIT: + done(ep, req, 0); + /* receive status phase */ + if (ep0_prime_status(udc, USB_DIR_OUT)) + qe_ep0_stall(udc); + break; + + case DATA_STATE_NEED_ZLP: + done(ep, req, 0); + udc->ep0_state = WAIT_FOR_SETUP; + break; + + case DATA_STATE_RECV: + done(ep, req, 0); + /* send status phase */ + if (ep0_prime_status(udc, USB_DIR_IN)) + qe_ep0_stall(udc); + break; + + case WAIT_FOR_OUT_STATUS: + done(ep, req, 0); + udc->ep0_state = WAIT_FOR_SETUP; + break; + + case WAIT_FOR_SETUP: + dev_vdbg(udc->dev, "Unexpected interrupt\n"); + break; + + default: + qe_ep0_stall(udc); + break; + } +} + +static int ep0_txcomplete(struct qe_ep *ep, unsigned char restart) +{ + struct qe_req *tx_req = NULL; + struct qe_frame *frame = ep->txframe; + + if ((frame_get_info(frame) & (ZLP | NO_REQ)) == (ZLP | NO_REQ)) { + if (!restart) + ep->udc->ep0_state = WAIT_FOR_SETUP; + else + sendnulldata(ep, ep->txframe, SETUP_STATUS | NO_REQ); + return 0; + } + + tx_req = ep->tx_req; + if (tx_req != NULL) { + if (!restart) { + int asent = ep->last; + ep->sent += asent; + ep->last -= asent; + } else { + ep->last = 0; + } + + /* a request already were transmitted completely */ + if ((ep->tx_req->req.length - ep->sent) <= 0) { + ep->tx_req->req.actual = (unsigned int)ep->sent; + ep0_req_complete(ep->udc, ep->tx_req); + ep->tx_req = NULL; + ep->last = 0; + ep->sent = 0; + } + } else { + dev_vdbg(ep->udc->dev, "the ep0_controller have no req\n"); + } + + return 0; +} + +static int ep0_txframe_handle(struct qe_ep *ep) +{ + /* if have error, transmit again */ + if (frame_get_status(ep->txframe) & FRAME_ERROR) { + qe_ep_flushtxfifo(ep); + dev_vdbg(ep->udc->dev, "The EP0 transmit data have error!\n"); + if (frame_get_info(ep->txframe) & PID_DATA0) + ep->data01 = 0; + else + ep->data01 = 1; + + ep0_txcomplete(ep, 1); + } else + ep0_txcomplete(ep, 0); + + frame_create_tx(ep, ep->txframe); + return 0; +} + +static int qe_ep0_txconf(struct qe_ep *ep) +{ + struct qe_bd __iomem *bd; + struct qe_frame *pframe; + u32 bdstatus; + + bd = ep->c_txbd; + bdstatus = in_be32((u32 __iomem *)bd); + while (!(bdstatus & T_R) && (bdstatus & ~T_W)) { + pframe = ep->txframe; + + /* clear and recycle the BD */ + out_be32((u32 __iomem *)bd, bdstatus & T_W); + out_be32(&bd->buf, 0); + if (bdstatus & T_W) + ep->c_txbd = ep->txbase; + else + ep->c_txbd++; + + if (ep->c_txbd == ep->n_txbd) { + if (bdstatus & DEVICE_T_ERROR) { + frame_set_status(pframe, FRAME_ERROR); + if (bdstatus & T_TO) + pframe->status |= TX_ER_TIMEOUT; + if (bdstatus & T_UN) + pframe->status |= TX_ER_UNDERUN; + } + ep0_txframe_handle(ep); + } + + bd = ep->c_txbd; + bdstatus = in_be32((u32 __iomem *)bd); + } + + return 0; +} + +static int ep_txframe_handle(struct qe_ep *ep) +{ + if (frame_get_status(ep->txframe) & FRAME_ERROR) { + qe_ep_flushtxfifo(ep); + dev_vdbg(ep->udc->dev, "The EP0 transmit data have error!\n"); + if (frame_get_info(ep->txframe) & PID_DATA0) + ep->data01 = 0; + else + ep->data01 = 1; + + txcomplete(ep, 1); + } else + txcomplete(ep, 0); + + frame_create_tx(ep, ep->txframe); /* send the data */ + return 0; +} + +/* confirm the already trainsmited bd */ +static int qe_ep_txconf(struct qe_ep *ep) +{ + struct qe_bd __iomem *bd; + struct qe_frame *pframe = NULL; + u32 bdstatus; + unsigned char breakonrxinterrupt = 0; + + bd = ep->c_txbd; + bdstatus = in_be32((u32 __iomem *)bd); + while (!(bdstatus & T_R) && (bdstatus & ~T_W)) { + pframe = ep->txframe; + if (bdstatus & DEVICE_T_ERROR) { + frame_set_status(pframe, FRAME_ERROR); + if (bdstatus & T_TO) + pframe->status |= TX_ER_TIMEOUT; + if (bdstatus & T_UN) + pframe->status |= TX_ER_UNDERUN; + } + + /* clear and recycle the BD */ + out_be32((u32 __iomem *)bd, bdstatus & T_W); + out_be32(&bd->buf, 0); + if (bdstatus & T_W) + ep->c_txbd = ep->txbase; + else + ep->c_txbd++; + + /* handle the tx frame */ + ep_txframe_handle(ep); + bd = ep->c_txbd; + bdstatus = in_be32((u32 __iomem *)bd); + } + if (breakonrxinterrupt) + return -EIO; + else + return 0; +} + +/* Add a request in queue, and try to transmit a packet */ +static int ep_req_send(struct qe_ep *ep, struct qe_req *req) +{ + int reval = 0; + + if (ep->tx_req == NULL) { + ep->sent = 0; + ep->last = 0; + txcomplete(ep, 0); /* can gain a new tx_req */ + reval = frame_create_tx(ep, ep->txframe); + } + return reval; +} + +/* Maybe this is a good ideal */ +static int ep_req_rx(struct qe_ep *ep, struct qe_req *req) +{ + struct qe_udc *udc = ep->udc; + struct qe_frame *pframe = NULL; + struct qe_bd __iomem *bd; + u32 bdstatus, length; + u32 vaddr, fsize; + u8 *cp; + u8 finish_req = 0; + u8 framepid; + + if (list_empty(&ep->queue)) { + dev_vdbg(udc->dev, "the req already finish!\n"); + return 0; + } + pframe = ep->rxframe; + + bd = ep->n_rxbd; + bdstatus = in_be32((u32 __iomem *)bd); + length = bdstatus & BD_LENGTH_MASK; + + while (!(bdstatus & R_E) && length) { + if (finish_req) + break; + if ((bdstatus & R_F) && (bdstatus & R_L) + && !(bdstatus & R_ERROR)) { + qe_frame_clean(pframe); + vaddr = (u32)phys_to_virt(in_be32(&bd->buf)); + frame_set_data(pframe, (u8 *)vaddr); + frame_set_length(pframe, (length - USB_CRC_SIZE)); + frame_set_status(pframe, FRAME_OK); + switch (bdstatus & R_PID) { + case R_PID_DATA1: + frame_set_info(pframe, PID_DATA1); break; + default: + frame_set_info(pframe, PID_DATA0); break; + } + /* handle the rx frame */ + + if (frame_get_info(pframe) & PID_DATA1) + framepid = 0x1; + else + framepid = 0; + + if (framepid != ep->data01) { + dev_vdbg(udc->dev, "the data01 error!\n"); + } else { + fsize = frame_get_length(pframe); + + cp = (u8 *)(req->req.buf) + req->req.actual; + if (cp) { + memcpy(cp, pframe->data, fsize); + req->req.actual += fsize; + if ((fsize < ep->ep.maxpacket) + || (req->req.actual >= + req->req.length)) { + finish_req = 1; + done(ep, req, 0); + if (list_empty(&ep->queue)) + qe_eprx_nack(ep); + } + } + qe_ep_toggledata01(ep); + } + } else { + dev_err(udc->dev, "The receive frame with error!\n"); + } + + /* note: don't clear the rxbd's buffer address * + * only Clear the length */ + out_be32((u32 __iomem *)bd, (bdstatus & BD_STATUS_MASK)); + ep->has_data--; + + /* Get next BD */ + if (bdstatus & R_W) + bd = ep->rxbase; + else + bd++; + + bdstatus = in_be32((u32 __iomem *)bd); + length = bdstatus & BD_LENGTH_MASK; + } + + ep->n_rxbd = bd; + ep_recycle_rxbds(ep); + + return 0; +} + +/* only add the request in queue */ +static int ep_req_receive(struct qe_ep *ep, struct qe_req *req) +{ + if (ep->state == EP_STATE_NACK) { + if (ep->has_data <= 0) { + /* Enable rx and unmask rx interrupt */ + qe_eprx_normal(ep); + } else { + /* Copy the exist BD data */ + ep_req_rx(ep, req); + } + } + + return 0; +} + +/******************************************************************** + Internal Used Function End +********************************************************************/ + +/*----------------------------------------------------------------------- + Endpoint Management Functions For Gadget + -----------------------------------------------------------------------*/ +static int qe_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct qe_udc *udc; + struct qe_ep *ep; + int retval = 0; + unsigned char epnum; + + ep = container_of(_ep, struct qe_ep, ep); + + /* catch various bogus parameters */ + if (!_ep || !desc || _ep->name == ep_name[0] || + (desc->bDescriptorType != USB_DT_ENDPOINT)) + return -EINVAL; + + udc = ep->udc; + if (!udc->driver || (udc->gadget.speed == USB_SPEED_UNKNOWN)) + return -ESHUTDOWN; + + epnum = (u8)desc->bEndpointAddress & 0xF; + + retval = qe_ep_init(udc, epnum, desc); + if (retval != 0) { + cpm_muram_free(cpm_muram_offset(ep->rxbase)); + dev_dbg(udc->dev, "enable ep%d failed\n", ep->epnum); + return -EINVAL; + } + dev_dbg(udc->dev, "enable ep%d successful\n", ep->epnum); + return 0; +} + +static int qe_ep_disable(struct usb_ep *_ep) +{ + struct qe_udc *udc; + struct qe_ep *ep; + unsigned long flags; + unsigned int size; + + ep = container_of(_ep, struct qe_ep, ep); + udc = ep->udc; + + if (!_ep || !ep->ep.desc) { + dev_dbg(udc->dev, "%s not enabled\n", _ep ? ep->ep.name : NULL); + return -EINVAL; + } + + spin_lock_irqsave(&udc->lock, flags); + /* Nuke all pending requests (does flush) */ + nuke(ep, -ESHUTDOWN); + ep->ep.desc = NULL; + ep->stopped = 1; + ep->tx_req = NULL; + qe_ep_reset(udc, ep->epnum); + spin_unlock_irqrestore(&udc->lock, flags); + + cpm_muram_free(cpm_muram_offset(ep->rxbase)); + + if (ep->dir == USB_DIR_OUT) + size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) * + (USB_BDRING_LEN_RX + 1); + else + size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) * + (USB_BDRING_LEN + 1); + + if (ep->dir != USB_DIR_IN) { + kfree(ep->rxframe); + if (ep->rxbufmap) { + dma_unmap_single(udc->gadget.dev.parent, + ep->rxbuf_d, size, + DMA_FROM_DEVICE); + ep->rxbuf_d = DMA_ADDR_INVALID; + } else { + dma_sync_single_for_cpu( + udc->gadget.dev.parent, + ep->rxbuf_d, size, + DMA_FROM_DEVICE); + } + kfree(ep->rxbuffer); + } + + if (ep->dir != USB_DIR_OUT) + kfree(ep->txframe); + + dev_dbg(udc->dev, "disabled %s OK\n", _ep->name); + return 0; +} + +static struct usb_request *qe_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) +{ + struct qe_req *req; + + req = kzalloc(sizeof(*req), gfp_flags); + if (!req) + return NULL; + + req->req.dma = DMA_ADDR_INVALID; + + INIT_LIST_HEAD(&req->queue); + + return &req->req; +} + +static void qe_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct qe_req *req; + + req = container_of(_req, struct qe_req, req); + + if (_req) + kfree(req); +} + +static int __qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct qe_ep *ep = container_of(_ep, struct qe_ep, ep); + struct qe_req *req = container_of(_req, struct qe_req, req); + struct qe_udc *udc; + int reval; + + udc = ep->udc; + /* catch various bogus parameters */ + if (!_req || !req->req.complete || !req->req.buf + || !list_empty(&req->queue)) { + dev_dbg(udc->dev, "bad params\n"); + return -EINVAL; + } + if (!_ep || (!ep->ep.desc && ep_index(ep))) { + dev_dbg(udc->dev, "bad ep\n"); + return -EINVAL; + } + + if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + req->ep = ep; + + /* map virtual address to hardware */ + if (req->req.dma == DMA_ADDR_INVALID) { + req->req.dma = dma_map_single(ep->udc->gadget.dev.parent, + req->req.buf, + req->req.length, + ep_is_in(ep) + ? DMA_TO_DEVICE : + DMA_FROM_DEVICE); + req->mapped = 1; + } else { + dma_sync_single_for_device(ep->udc->gadget.dev.parent, + req->req.dma, req->req.length, + ep_is_in(ep) + ? DMA_TO_DEVICE : + DMA_FROM_DEVICE); + req->mapped = 0; + } + + req->req.status = -EINPROGRESS; + req->req.actual = 0; + + list_add_tail(&req->queue, &ep->queue); + dev_vdbg(udc->dev, "gadget have request in %s! %d\n", + ep->name, req->req.length); + + /* push the request to device */ + if (ep_is_in(ep)) + reval = ep_req_send(ep, req); + + /* EP0 */ + if (ep_index(ep) == 0 && req->req.length > 0) { + if (ep_is_in(ep)) + udc->ep0_state = DATA_STATE_XMIT; + else + udc->ep0_state = DATA_STATE_RECV; + } + + if (ep->dir == USB_DIR_OUT) + reval = ep_req_receive(ep, req); + + return 0; +} + +/* queues (submits) an I/O request to an endpoint */ +static int qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t gfp_flags) +{ + struct qe_ep *ep = container_of(_ep, struct qe_ep, ep); + struct qe_udc *udc = ep->udc; + unsigned long flags; + int ret; + + spin_lock_irqsave(&udc->lock, flags); + ret = __qe_ep_queue(_ep, _req); + spin_unlock_irqrestore(&udc->lock, flags); + return ret; +} + +/* dequeues (cancels, unlinks) an I/O request from an endpoint */ +static int qe_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct qe_ep *ep = container_of(_ep, struct qe_ep, ep); + struct qe_req *req = NULL; + struct qe_req *iter; + unsigned long flags; + + if (!_ep || !_req) + return -EINVAL; + + spin_lock_irqsave(&ep->udc->lock, flags); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry(iter, &ep->queue, queue) { + if (&iter->req != _req) + continue; + req = iter; + break; + } + + if (!req) { + spin_unlock_irqrestore(&ep->udc->lock, flags); + return -EINVAL; + } + + done(ep, req, -ECONNRESET); + + spin_unlock_irqrestore(&ep->udc->lock, flags); + return 0; +} + +/*----------------------------------------------------------------- + * modify the endpoint halt feature + * @ep: the non-isochronous endpoint being stalled + * @value: 1--set halt 0--clear halt + * Returns zero, or a negative error code. +*----------------------------------------------------------------*/ +static int qe_ep_set_halt(struct usb_ep *_ep, int value) +{ + struct qe_ep *ep; + unsigned long flags; + int status = -EOPNOTSUPP; + struct qe_udc *udc; + + ep = container_of(_ep, struct qe_ep, ep); + if (!_ep || !ep->ep.desc) { + status = -EINVAL; + goto out; + } + + udc = ep->udc; + /* Attempt to halt IN ep will fail if any transfer requests + * are still queue */ + if (value && ep_is_in(ep) && !list_empty(&ep->queue)) { + status = -EAGAIN; + goto out; + } + + status = 0; + spin_lock_irqsave(&ep->udc->lock, flags); + qe_eptx_stall_change(ep, value); + qe_eprx_stall_change(ep, value); + spin_unlock_irqrestore(&ep->udc->lock, flags); + + if (ep->epnum == 0) { + udc->ep0_state = WAIT_FOR_SETUP; + udc->ep0_dir = 0; + } + + /* set data toggle to DATA0 on clear halt */ + if (value == 0) + ep->data01 = 0; +out: + dev_vdbg(udc->dev, "%s %s halt stat %d\n", ep->ep.name, + value ? "set" : "clear", status); + + return status; +} + +static const struct usb_ep_ops qe_ep_ops = { + .enable = qe_ep_enable, + .disable = qe_ep_disable, + + .alloc_request = qe_alloc_request, + .free_request = qe_free_request, + + .queue = qe_ep_queue, + .dequeue = qe_ep_dequeue, + + .set_halt = qe_ep_set_halt, +}; + +/*------------------------------------------------------------------------ + Gadget Driver Layer Operations + ------------------------------------------------------------------------*/ + +/* Get the current frame number */ +static int qe_get_frame(struct usb_gadget *gadget) +{ + struct qe_udc *udc = container_of(gadget, struct qe_udc, gadget); + u16 tmp; + + tmp = in_be16(&udc->usb_param->frame_n); + if (tmp & 0x8000) + return tmp & 0x07ff; + return -EINVAL; +} + +static int fsl_qe_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver); +static int fsl_qe_stop(struct usb_gadget *gadget); + +/* defined in usb_gadget.h */ +static const struct usb_gadget_ops qe_gadget_ops = { + .get_frame = qe_get_frame, + .udc_start = fsl_qe_start, + .udc_stop = fsl_qe_stop, +}; + +/*------------------------------------------------------------------------- + USB ep0 Setup process in BUS Enumeration + -------------------------------------------------------------------------*/ +static int udc_reset_ep_queue(struct qe_udc *udc, u8 pipe) +{ + struct qe_ep *ep = &udc->eps[pipe]; + + nuke(ep, -ECONNRESET); + ep->tx_req = NULL; + return 0; +} + +static int reset_queues(struct qe_udc *udc) +{ + u8 pipe; + + for (pipe = 0; pipe < USB_MAX_ENDPOINTS; pipe++) + udc_reset_ep_queue(udc, pipe); + + /* report disconnect; the driver is already quiesced */ + spin_unlock(&udc->lock); + usb_gadget_udc_reset(&udc->gadget, udc->driver); + spin_lock(&udc->lock); + + return 0; +} + +static void ch9setaddress(struct qe_udc *udc, u16 value, u16 index, + u16 length) +{ + /* Save the new address to device struct */ + udc->device_address = (u8) value; + /* Update usb state */ + udc->usb_state = USB_STATE_ADDRESS; + + /* Status phase , send a ZLP */ + if (ep0_prime_status(udc, USB_DIR_IN)) + qe_ep0_stall(udc); +} + +static void ownercomplete(struct usb_ep *_ep, struct usb_request *_req) +{ + struct qe_req *req = container_of(_req, struct qe_req, req); + + req->req.buf = NULL; + kfree(req); +} + +static void ch9getstatus(struct qe_udc *udc, u8 request_type, u16 value, + u16 index, u16 length) +{ + u16 usb_status = 0; + struct qe_req *req; + struct qe_ep *ep; + int status = 0; + + ep = &udc->eps[0]; + if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) { + /* Get device status */ + usb_status = 1 << USB_DEVICE_SELF_POWERED; + } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) { + /* Get interface status */ + /* We don't have interface information in udc driver */ + usb_status = 0; + } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) { + /* Get endpoint status */ + int pipe = index & USB_ENDPOINT_NUMBER_MASK; + struct qe_ep *target_ep; + u16 usep; + + if (pipe >= USB_MAX_ENDPOINTS) + goto stall; + target_ep = &udc->eps[pipe]; + + /* stall if endpoint doesn't exist */ + if (!target_ep->ep.desc) + goto stall; + + usep = in_be16(&udc->usb_regs->usb_usep[pipe]); + if (index & USB_DIR_IN) { + if (target_ep->dir != USB_DIR_IN) + goto stall; + if ((usep & USB_THS_MASK) == USB_THS_STALL) + usb_status = 1 << USB_ENDPOINT_HALT; + } else { + if (target_ep->dir != USB_DIR_OUT) + goto stall; + if ((usep & USB_RHS_MASK) == USB_RHS_STALL) + usb_status = 1 << USB_ENDPOINT_HALT; + } + } + + req = container_of(qe_alloc_request(&ep->ep, GFP_KERNEL), + struct qe_req, req); + req->req.length = 2; + req->req.buf = udc->statusbuf; + *(u16 *)req->req.buf = cpu_to_le16(usb_status); + req->req.status = -EINPROGRESS; + req->req.actual = 0; + req->req.complete = ownercomplete; + + udc->ep0_dir = USB_DIR_IN; + + /* data phase */ + status = __qe_ep_queue(&ep->ep, &req->req); + + if (status == 0) + return; +stall: + dev_err(udc->dev, "Can't respond to getstatus request \n"); + qe_ep0_stall(udc); +} + +/* only handle the setup request, suppose the device in normal status */ +static void setup_received_handle(struct qe_udc *udc, + struct usb_ctrlrequest *setup) +{ + /* Fix Endian (udc->local_setup_buff is cpu Endian now)*/ + u16 wValue = le16_to_cpu(setup->wValue); + u16 wIndex = le16_to_cpu(setup->wIndex); + u16 wLength = le16_to_cpu(setup->wLength); + + /* clear the previous request in the ep0 */ + udc_reset_ep_queue(udc, 0); + + if (setup->bRequestType & USB_DIR_IN) + udc->ep0_dir = USB_DIR_IN; + else + udc->ep0_dir = USB_DIR_OUT; + + switch (setup->bRequest) { + case USB_REQ_GET_STATUS: + /* Data+Status phase form udc */ + if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK)) + != (USB_DIR_IN | USB_TYPE_STANDARD)) + break; + ch9getstatus(udc, setup->bRequestType, wValue, wIndex, + wLength); + return; + + case USB_REQ_SET_ADDRESS: + /* Status phase from udc */ + if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD | + USB_RECIP_DEVICE)) + break; + ch9setaddress(udc, wValue, wIndex, wLength); + return; + + case USB_REQ_CLEAR_FEATURE: + case USB_REQ_SET_FEATURE: + /* Requests with no data phase, status phase from udc */ + if ((setup->bRequestType & USB_TYPE_MASK) + != USB_TYPE_STANDARD) + break; + + if ((setup->bRequestType & USB_RECIP_MASK) + == USB_RECIP_ENDPOINT) { + int pipe = wIndex & USB_ENDPOINT_NUMBER_MASK; + struct qe_ep *ep; + + if (wValue != 0 || wLength != 0 + || pipe >= USB_MAX_ENDPOINTS) + break; + ep = &udc->eps[pipe]; + + spin_unlock(&udc->lock); + qe_ep_set_halt(&ep->ep, + (setup->bRequest == USB_REQ_SET_FEATURE) + ? 1 : 0); + spin_lock(&udc->lock); + } + + ep0_prime_status(udc, USB_DIR_IN); + + return; + + default: + break; + } + + if (wLength) { + /* Data phase from gadget, status phase from udc */ + if (setup->bRequestType & USB_DIR_IN) { + udc->ep0_state = DATA_STATE_XMIT; + udc->ep0_dir = USB_DIR_IN; + } else { + udc->ep0_state = DATA_STATE_RECV; + udc->ep0_dir = USB_DIR_OUT; + } + spin_unlock(&udc->lock); + if (udc->driver->setup(&udc->gadget, + &udc->local_setup_buff) < 0) + qe_ep0_stall(udc); + spin_lock(&udc->lock); + } else { + /* No data phase, IN status from gadget */ + udc->ep0_dir = USB_DIR_IN; + spin_unlock(&udc->lock); + if (udc->driver->setup(&udc->gadget, + &udc->local_setup_buff) < 0) + qe_ep0_stall(udc); + spin_lock(&udc->lock); + udc->ep0_state = DATA_STATE_NEED_ZLP; + } +} + +/*------------------------------------------------------------------------- + USB Interrupt handlers + -------------------------------------------------------------------------*/ +static void suspend_irq(struct qe_udc *udc) +{ + udc->resume_state = udc->usb_state; + udc->usb_state = USB_STATE_SUSPENDED; + + /* report suspend to the driver ,serial.c not support this*/ + if (udc->driver->suspend) + udc->driver->suspend(&udc->gadget); +} + +static void resume_irq(struct qe_udc *udc) +{ + udc->usb_state = udc->resume_state; + udc->resume_state = 0; + + /* report resume to the driver , serial.c not support this*/ + if (udc->driver->resume) + udc->driver->resume(&udc->gadget); +} + +static void idle_irq(struct qe_udc *udc) +{ + u8 usbs; + + usbs = in_8(&udc->usb_regs->usb_usbs); + if (usbs & USB_IDLE_STATUS_MASK) { + if ((udc->usb_state) != USB_STATE_SUSPENDED) + suspend_irq(udc); + } else { + if (udc->usb_state == USB_STATE_SUSPENDED) + resume_irq(udc); + } +} + +static int reset_irq(struct qe_udc *udc) +{ + unsigned char i; + + if (udc->usb_state == USB_STATE_DEFAULT) + return 0; + + qe_usb_disable(udc); + out_8(&udc->usb_regs->usb_usadr, 0); + + for (i = 0; i < USB_MAX_ENDPOINTS; i++) { + if (udc->eps[i].init) + qe_ep_reset(udc, i); + } + + reset_queues(udc); + udc->usb_state = USB_STATE_DEFAULT; + udc->ep0_state = WAIT_FOR_SETUP; + udc->ep0_dir = USB_DIR_OUT; + qe_usb_enable(udc); + return 0; +} + +static int bsy_irq(struct qe_udc *udc) +{ + return 0; +} + +static int txe_irq(struct qe_udc *udc) +{ + return 0; +} + +/* ep0 tx interrupt also in here */ +static int tx_irq(struct qe_udc *udc) +{ + struct qe_ep *ep; + struct qe_bd __iomem *bd; + int i, res = 0; + + if ((udc->usb_state == USB_STATE_ADDRESS) + && (in_8(&udc->usb_regs->usb_usadr) == 0)) + out_8(&udc->usb_regs->usb_usadr, udc->device_address); + + for (i = (USB_MAX_ENDPOINTS-1); ((i >= 0) && (res == 0)); i--) { + ep = &udc->eps[i]; + if (ep && ep->init && (ep->dir != USB_DIR_OUT)) { + bd = ep->c_txbd; + if (!(in_be32((u32 __iomem *)bd) & T_R) + && (in_be32(&bd->buf))) { + /* confirm the transmitted bd */ + if (ep->epnum == 0) + res = qe_ep0_txconf(ep); + else + res = qe_ep_txconf(ep); + } + } + } + return res; +} + + +/* setup packect's rx is handle in the function too */ +static void rx_irq(struct qe_udc *udc) +{ + struct qe_ep *ep; + struct qe_bd __iomem *bd; + int i; + + for (i = 0; i < USB_MAX_ENDPOINTS; i++) { + ep = &udc->eps[i]; + if (ep && ep->init && (ep->dir != USB_DIR_IN)) { + bd = ep->n_rxbd; + if (!(in_be32((u32 __iomem *)bd) & R_E) + && (in_be32(&bd->buf))) { + if (ep->epnum == 0) { + qe_ep0_rx(udc); + } else { + /*non-setup package receive*/ + qe_ep_rx(ep); + } + } + } + } +} + +static irqreturn_t qe_udc_irq(int irq, void *_udc) +{ + struct qe_udc *udc = (struct qe_udc *)_udc; + u16 irq_src; + irqreturn_t status = IRQ_NONE; + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + + irq_src = in_be16(&udc->usb_regs->usb_usber) & + in_be16(&udc->usb_regs->usb_usbmr); + /* Clear notification bits */ + out_be16(&udc->usb_regs->usb_usber, irq_src); + /* USB Interrupt */ + if (irq_src & USB_E_IDLE_MASK) { + idle_irq(udc); + irq_src &= ~USB_E_IDLE_MASK; + status = IRQ_HANDLED; + } + + if (irq_src & USB_E_TXB_MASK) { + tx_irq(udc); + irq_src &= ~USB_E_TXB_MASK; + status = IRQ_HANDLED; + } + + if (irq_src & USB_E_RXB_MASK) { + rx_irq(udc); + irq_src &= ~USB_E_RXB_MASK; + status = IRQ_HANDLED; + } + + if (irq_src & USB_E_RESET_MASK) { + reset_irq(udc); + irq_src &= ~USB_E_RESET_MASK; + status = IRQ_HANDLED; + } + + if (irq_src & USB_E_BSY_MASK) { + bsy_irq(udc); + irq_src &= ~USB_E_BSY_MASK; + status = IRQ_HANDLED; + } + + if (irq_src & USB_E_TXE_MASK) { + txe_irq(udc); + irq_src &= ~USB_E_TXE_MASK; + status = IRQ_HANDLED; + } + + spin_unlock_irqrestore(&udc->lock, flags); + + return status; +} + +/*------------------------------------------------------------------------- + Gadget driver probe and unregister. + --------------------------------------------------------------------------*/ +static int fsl_qe_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct qe_udc *udc; + unsigned long flags; + + udc = container_of(gadget, struct qe_udc, gadget); + /* lock is needed but whether should use this lock or another */ + spin_lock_irqsave(&udc->lock, flags); + + /* hook up the driver */ + udc->driver = driver; + udc->gadget.speed = driver->max_speed; + + /* Enable IRQ reg and Set usbcmd reg EN bit */ + qe_usb_enable(udc); + + out_be16(&udc->usb_regs->usb_usber, 0xffff); + out_be16(&udc->usb_regs->usb_usbmr, USB_E_DEFAULT_DEVICE); + udc->usb_state = USB_STATE_ATTACHED; + udc->ep0_state = WAIT_FOR_SETUP; + udc->ep0_dir = USB_DIR_OUT; + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static int fsl_qe_stop(struct usb_gadget *gadget) +{ + struct qe_udc *udc; + struct qe_ep *loop_ep; + unsigned long flags; + + udc = container_of(gadget, struct qe_udc, gadget); + /* stop usb controller, disable intr */ + qe_usb_disable(udc); + + /* in fact, no needed */ + udc->usb_state = USB_STATE_ATTACHED; + udc->ep0_state = WAIT_FOR_SETUP; + udc->ep0_dir = 0; + + /* stand operation */ + spin_lock_irqsave(&udc->lock, flags); + udc->gadget.speed = USB_SPEED_UNKNOWN; + nuke(&udc->eps[0], -ESHUTDOWN); + list_for_each_entry(loop_ep, &udc->gadget.ep_list, ep.ep_list) + nuke(loop_ep, -ESHUTDOWN); + spin_unlock_irqrestore(&udc->lock, flags); + + udc->driver = NULL; + + return 0; +} + +/* udc structure's alloc and setup, include ep-param alloc */ +static struct qe_udc *qe_udc_config(struct platform_device *ofdev) +{ + struct qe_udc *udc; + struct device_node *np = ofdev->dev.of_node; + unsigned long tmp_addr = 0; + struct usb_device_para __iomem *usbpram; + unsigned int i; + u64 size; + u32 offset; + + udc = kzalloc(sizeof(*udc), GFP_KERNEL); + if (!udc) + goto cleanup; + + udc->dev = &ofdev->dev; + + /* get default address of usb parameter in MURAM from device tree */ + offset = *of_get_address(np, 1, &size, NULL); + udc->usb_param = cpm_muram_addr(offset); + memset_io(udc->usb_param, 0, size); + + usbpram = udc->usb_param; + out_be16(&usbpram->frame_n, 0); + out_be32(&usbpram->rstate, 0); + + tmp_addr = cpm_muram_alloc((USB_MAX_ENDPOINTS * + sizeof(struct usb_ep_para)), + USB_EP_PARA_ALIGNMENT); + if (IS_ERR_VALUE(tmp_addr)) + goto cleanup; + + for (i = 0; i < USB_MAX_ENDPOINTS; i++) { + out_be16(&usbpram->epptr[i], (u16)tmp_addr); + udc->ep_param[i] = cpm_muram_addr(tmp_addr); + tmp_addr += 32; + } + + memset_io(udc->ep_param[0], 0, + USB_MAX_ENDPOINTS * sizeof(struct usb_ep_para)); + + udc->resume_state = USB_STATE_NOTATTACHED; + udc->usb_state = USB_STATE_POWERED; + udc->ep0_dir = 0; + + spin_lock_init(&udc->lock); + return udc; + +cleanup: + kfree(udc); + return NULL; +} + +/* USB Controller register init */ +static int qe_udc_reg_init(struct qe_udc *udc) +{ + struct usb_ctlr __iomem *qe_usbregs; + qe_usbregs = udc->usb_regs; + + /* Spec says that we must enable the USB controller to change mode. */ + out_8(&qe_usbregs->usb_usmod, 0x01); + /* Mode changed, now disable it, since muram isn't initialized yet. */ + out_8(&qe_usbregs->usb_usmod, 0x00); + + /* Initialize the rest. */ + out_be16(&qe_usbregs->usb_usbmr, 0); + out_8(&qe_usbregs->usb_uscom, 0); + out_be16(&qe_usbregs->usb_usber, USBER_ALL_CLEAR); + + return 0; +} + +static int qe_ep_config(struct qe_udc *udc, unsigned char pipe_num) +{ + struct qe_ep *ep = &udc->eps[pipe_num]; + + ep->udc = udc; + strcpy(ep->name, ep_name[pipe_num]); + ep->ep.name = ep_name[pipe_num]; + + if (pipe_num == 0) { + ep->ep.caps.type_control = true; + } else { + ep->ep.caps.type_iso = true; + ep->ep.caps.type_bulk = true; + ep->ep.caps.type_int = true; + } + + ep->ep.caps.dir_in = true; + ep->ep.caps.dir_out = true; + + ep->ep.ops = &qe_ep_ops; + ep->stopped = 1; + usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0); + ep->ep.desc = NULL; + ep->dir = 0xff; + ep->epnum = (u8)pipe_num; + ep->sent = 0; + ep->last = 0; + ep->init = 0; + ep->rxframe = NULL; + ep->txframe = NULL; + ep->tx_req = NULL; + ep->state = EP_STATE_IDLE; + ep->has_data = 0; + + /* the queue lists any req for this ep */ + INIT_LIST_HEAD(&ep->queue); + + /* gagdet.ep_list used for ep_autoconfig so no ep0*/ + if (pipe_num != 0) + list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); + + ep->gadget = &udc->gadget; + + return 0; +} + +/*----------------------------------------------------------------------- + * UDC device Driver operation functions * + *----------------------------------------------------------------------*/ +static void qe_udc_release(struct device *dev) +{ + struct qe_udc *udc = container_of(dev, struct qe_udc, gadget.dev); + int i; + + complete(udc->done); + cpm_muram_free(cpm_muram_offset(udc->ep_param[0])); + for (i = 0; i < USB_MAX_ENDPOINTS; i++) + udc->ep_param[i] = NULL; + + kfree(udc); +} + +/* Driver probe functions */ +static const struct of_device_id qe_udc_match[]; +static int qe_udc_probe(struct platform_device *ofdev) +{ + struct qe_udc *udc; + const struct of_device_id *match; + struct device_node *np = ofdev->dev.of_node; + struct qe_ep *ep; + unsigned int ret = 0; + unsigned int i; + const void *prop; + + match = of_match_device(qe_udc_match, &ofdev->dev); + if (!match) + return -EINVAL; + + prop = of_get_property(np, "mode", NULL); + if (!prop || strcmp(prop, "peripheral")) + return -ENODEV; + + /* Initialize the udc structure including QH member and other member */ + udc = qe_udc_config(ofdev); + if (!udc) { + dev_err(&ofdev->dev, "failed to initialize\n"); + return -ENOMEM; + } + + udc->soc_type = (unsigned long)match->data; + udc->usb_regs = of_iomap(np, 0); + if (!udc->usb_regs) { + ret = -ENOMEM; + goto err1; + } + + /* initialize usb hw reg except for regs for EP, + * leave usbintr reg untouched*/ + qe_udc_reg_init(udc); + + /* here comes the stand operations for probe + * set the qe_udc->gadget.xxx */ + udc->gadget.ops = &qe_gadget_ops; + + /* gadget.ep0 is a pointer */ + udc->gadget.ep0 = &udc->eps[0].ep; + + INIT_LIST_HEAD(&udc->gadget.ep_list); + + /* modify in register gadget process */ + udc->gadget.speed = USB_SPEED_UNKNOWN; + + /* name: Identifies the controller hardware type. */ + udc->gadget.name = driver_name; + udc->gadget.dev.parent = &ofdev->dev; + + /* initialize qe_ep struct */ + for (i = 0; i < USB_MAX_ENDPOINTS ; i++) { + /* because the ep type isn't decide here so + * qe_ep_init() should be called in ep_enable() */ + + /* setup the qe_ep struct and link ep.ep.list + * into gadget.ep_list */ + qe_ep_config(udc, (unsigned char)i); + } + + /* ep0 initialization in here */ + ret = qe_ep_init(udc, 0, &qe_ep0_desc); + if (ret) + goto err2; + + /* create a buf for ZLP send, need to remain zeroed */ + udc->nullbuf = devm_kzalloc(&ofdev->dev, 256, GFP_KERNEL); + if (udc->nullbuf == NULL) { + ret = -ENOMEM; + goto err3; + } + + /* buffer for data of get_status request */ + udc->statusbuf = devm_kzalloc(&ofdev->dev, 2, GFP_KERNEL); + if (udc->statusbuf == NULL) { + ret = -ENOMEM; + goto err3; + } + + udc->nullp = virt_to_phys((void *)udc->nullbuf); + if (udc->nullp == DMA_ADDR_INVALID) { + udc->nullp = dma_map_single( + udc->gadget.dev.parent, + udc->nullbuf, + 256, + DMA_TO_DEVICE); + udc->nullmap = 1; + } else { + dma_sync_single_for_device(udc->gadget.dev.parent, + udc->nullp, 256, + DMA_TO_DEVICE); + } + + tasklet_setup(&udc->rx_tasklet, ep_rx_tasklet); + /* request irq and disable DR */ + udc->usb_irq = irq_of_parse_and_map(np, 0); + if (!udc->usb_irq) { + ret = -EINVAL; + goto err_noirq; + } + + ret = request_irq(udc->usb_irq, qe_udc_irq, 0, + driver_name, udc); + if (ret) { + dev_err(udc->dev, "cannot request irq %d err %d\n", + udc->usb_irq, ret); + goto err4; + } + + ret = usb_add_gadget_udc_release(&ofdev->dev, &udc->gadget, + qe_udc_release); + if (ret) + goto err5; + + platform_set_drvdata(ofdev, udc); + dev_info(udc->dev, + "%s USB controller initialized as device\n", + (udc->soc_type == PORT_QE) ? "QE" : "CPM"); + return 0; + +err5: + free_irq(udc->usb_irq, udc); +err4: + irq_dispose_mapping(udc->usb_irq); +err_noirq: + if (udc->nullmap) { + dma_unmap_single(udc->gadget.dev.parent, + udc->nullp, 256, + DMA_TO_DEVICE); + udc->nullp = DMA_ADDR_INVALID; + } else { + dma_sync_single_for_cpu(udc->gadget.dev.parent, + udc->nullp, 256, + DMA_TO_DEVICE); + } +err3: + ep = &udc->eps[0]; + cpm_muram_free(cpm_muram_offset(ep->rxbase)); + kfree(ep->rxframe); + kfree(ep->rxbuffer); + kfree(ep->txframe); +err2: + iounmap(udc->usb_regs); +err1: + kfree(udc); + return ret; +} + +#ifdef CONFIG_PM +static int qe_udc_suspend(struct platform_device *dev, pm_message_t state) +{ + return -ENOTSUPP; +} + +static int qe_udc_resume(struct platform_device *dev) +{ + return -ENOTSUPP; +} +#endif + +static int qe_udc_remove(struct platform_device *ofdev) +{ + struct qe_udc *udc = platform_get_drvdata(ofdev); + struct qe_ep *ep; + unsigned int size; + DECLARE_COMPLETION_ONSTACK(done); + + usb_del_gadget_udc(&udc->gadget); + + udc->done = &done; + tasklet_disable(&udc->rx_tasklet); + + if (udc->nullmap) { + dma_unmap_single(udc->gadget.dev.parent, + udc->nullp, 256, + DMA_TO_DEVICE); + udc->nullp = DMA_ADDR_INVALID; + } else { + dma_sync_single_for_cpu(udc->gadget.dev.parent, + udc->nullp, 256, + DMA_TO_DEVICE); + } + + ep = &udc->eps[0]; + cpm_muram_free(cpm_muram_offset(ep->rxbase)); + size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) * (USB_BDRING_LEN + 1); + + kfree(ep->rxframe); + if (ep->rxbufmap) { + dma_unmap_single(udc->gadget.dev.parent, + ep->rxbuf_d, size, + DMA_FROM_DEVICE); + ep->rxbuf_d = DMA_ADDR_INVALID; + } else { + dma_sync_single_for_cpu(udc->gadget.dev.parent, + ep->rxbuf_d, size, + DMA_FROM_DEVICE); + } + + kfree(ep->rxbuffer); + kfree(ep->txframe); + + free_irq(udc->usb_irq, udc); + irq_dispose_mapping(udc->usb_irq); + + tasklet_kill(&udc->rx_tasklet); + + iounmap(udc->usb_regs); + + /* wait for release() of gadget.dev to free udc */ + wait_for_completion(&done); + + return 0; +} + +/*-------------------------------------------------------------------------*/ +static const struct of_device_id qe_udc_match[] = { + { + .compatible = "fsl,mpc8323-qe-usb", + .data = (void *)PORT_QE, + }, + { + .compatible = "fsl,mpc8360-qe-usb", + .data = (void *)PORT_QE, + }, + { + .compatible = "fsl,mpc8272-cpm-usb", + .data = (void *)PORT_CPM, + }, + {}, +}; + +MODULE_DEVICE_TABLE(of, qe_udc_match); + +static struct platform_driver udc_driver = { + .driver = { + .name = driver_name, + .of_match_table = qe_udc_match, + }, + .probe = qe_udc_probe, + .remove = qe_udc_remove, +#ifdef CONFIG_PM + .suspend = qe_udc_suspend, + .resume = qe_udc_resume, +#endif +}; + +module_platform_driver(udc_driver); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.h b/drivers/usb/gadget/udc/fsl_qe_udc.h new file mode 100644 index 000000000..53ca0ff7c --- /dev/null +++ b/drivers/usb/gadget/udc/fsl_qe_udc.h @@ -0,0 +1,417 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * drivers/usb/gadget/qe_udc.h + * + * Copyright (C) 2006-2008 Freescale Semiconductor, Inc. All rights reserved. + * + * Xiaobo Xie <X.Xie@freescale.com> + * Li Yang <leoli@freescale.com> + * + * Description: + * Freescale USB device/endpoint management registers + */ + +#ifndef __FSL_QE_UDC_H +#define __FSL_QE_UDC_H + +/* SoC type */ +#define PORT_CPM 0 +#define PORT_QE 1 + +#define USB_MAX_ENDPOINTS 4 +#define USB_MAX_PIPES USB_MAX_ENDPOINTS +#define USB_EP0_MAX_SIZE 64 +#define USB_MAX_CTRL_PAYLOAD 0x4000 +#define USB_BDRING_LEN 16 +#define USB_BDRING_LEN_RX 256 +#define USB_BDRING_LEN_TX 16 +#define MIN_EMPTY_BDS 128 +#define MAX_DATA_BDS 8 +#define USB_CRC_SIZE 2 +#define USB_DIR_BOTH 0x88 +#define R_BUF_MAXSIZE 0x800 +#define USB_EP_PARA_ALIGNMENT 32 + +/* USB Mode Register bit define */ +#define USB_MODE_EN 0x01 +#define USB_MODE_HOST 0x02 +#define USB_MODE_TEST 0x04 +#define USB_MODE_SFTE 0x08 +#define USB_MODE_RESUME 0x40 +#define USB_MODE_LSS 0x80 + +/* USB Slave Address Register Mask */ +#define USB_SLVADDR_MASK 0x7F + +/* USB Endpoint register define */ +#define USB_EPNUM_MASK 0xF000 +#define USB_EPNUM_SHIFT 12 + +#define USB_TRANS_MODE_SHIFT 8 +#define USB_TRANS_CTR 0x0000 +#define USB_TRANS_INT 0x0100 +#define USB_TRANS_BULK 0x0200 +#define USB_TRANS_ISO 0x0300 + +#define USB_EP_MF 0x0020 +#define USB_EP_RTE 0x0010 + +#define USB_THS_SHIFT 2 +#define USB_THS_MASK 0x000c +#define USB_THS_NORMAL 0x0 +#define USB_THS_IGNORE_IN 0x0004 +#define USB_THS_NACK 0x0008 +#define USB_THS_STALL 0x000c + +#define USB_RHS_SHIFT 0 +#define USB_RHS_MASK 0x0003 +#define USB_RHS_NORMAL 0x0 +#define USB_RHS_IGNORE_OUT 0x0001 +#define USB_RHS_NACK 0x0002 +#define USB_RHS_STALL 0x0003 + +#define USB_RTHS_MASK 0x000f + +/* USB Command Register define */ +#define USB_CMD_STR_FIFO 0x80 +#define USB_CMD_FLUSH_FIFO 0x40 +#define USB_CMD_ISFT 0x20 +#define USB_CMD_DSFT 0x10 +#define USB_CMD_EP_MASK 0x03 + +/* USB Event and Mask Register define */ +#define USB_E_MSF_MASK 0x0800 +#define USB_E_SFT_MASK 0x0400 +#define USB_E_RESET_MASK 0x0200 +#define USB_E_IDLE_MASK 0x0100 +#define USB_E_TXE4_MASK 0x0080 +#define USB_E_TXE3_MASK 0x0040 +#define USB_E_TXE2_MASK 0x0020 +#define USB_E_TXE1_MASK 0x0010 +#define USB_E_SOF_MASK 0x0008 +#define USB_E_BSY_MASK 0x0004 +#define USB_E_TXB_MASK 0x0002 +#define USB_E_RXB_MASK 0x0001 +#define USBER_ALL_CLEAR 0x0fff + +#define USB_E_DEFAULT_DEVICE (USB_E_RESET_MASK | USB_E_TXE4_MASK | \ + USB_E_TXE3_MASK | USB_E_TXE2_MASK | \ + USB_E_TXE1_MASK | USB_E_BSY_MASK | \ + USB_E_TXB_MASK | USB_E_RXB_MASK) + +#define USB_E_TXE_MASK (USB_E_TXE4_MASK | USB_E_TXE3_MASK|\ + USB_E_TXE2_MASK | USB_E_TXE1_MASK) +/* USB Status Register define */ +#define USB_IDLE_STATUS_MASK 0x01 + +/* USB Start of Frame Timer */ +#define USB_USSFT_MASK 0x3FFF + +/* USB Frame Number Register */ +#define USB_USFRN_MASK 0xFFFF + +struct usb_device_para{ + u16 epptr[4]; + u32 rstate; + u32 rptr; + u16 frame_n; + u16 rbcnt; + u32 rtemp; + u32 rxusb_data; + u16 rxuptr; + u8 reso[2]; + u32 softbl; + u8 sofucrctemp; +}; + +struct usb_ep_para{ + u16 rbase; + u16 tbase; + u8 rbmr; + u8 tbmr; + u16 mrblr; + u16 rbptr; + u16 tbptr; + u32 tstate; + u32 tptr; + u16 tcrc; + u16 tbcnt; + u32 ttemp; + u16 txusbu_ptr; + u8 reserve[2]; +}; + +#define USB_BUSMODE_GBL 0x20 +#define USB_BUSMODE_BO_MASK 0x18 +#define USB_BUSMODE_BO_SHIFT 0x3 +#define USB_BUSMODE_BE 0x2 +#define USB_BUSMODE_CETM 0x04 +#define USB_BUSMODE_DTB 0x02 + +/* Endpoint basic handle */ +#define ep_index(EP) ((EP)->ep.desc->bEndpointAddress & 0xF) +#define ep_maxpacket(EP) ((EP)->ep.maxpacket) +#define ep_is_in(EP) ((ep_index(EP) == 0) ? (EP->udc->ep0_dir == \ + USB_DIR_IN) : ((EP)->ep.desc->bEndpointAddress \ + & USB_DIR_IN) == USB_DIR_IN) + +/* ep0 transfer state */ +#define WAIT_FOR_SETUP 0 +#define DATA_STATE_XMIT 1 +#define DATA_STATE_NEED_ZLP 2 +#define WAIT_FOR_OUT_STATUS 3 +#define DATA_STATE_RECV 4 + +/* ep tramsfer mode */ +#define USBP_TM_CTL 0 +#define USBP_TM_ISO 1 +#define USBP_TM_BULK 2 +#define USBP_TM_INT 3 + +/*----------------------------------------------------------------------------- + USB RX And TX DATA Frame + -----------------------------------------------------------------------------*/ +struct qe_frame{ + u8 *data; + u32 len; + u32 status; + u32 info; + + void *privdata; + struct list_head node; +}; + +/* Frame structure, info field. */ +#define PID_DATA0 0x80000000 /* Data toggle zero */ +#define PID_DATA1 0x40000000 /* Data toggle one */ +#define PID_SETUP 0x20000000 /* setup bit */ +#define SETUP_STATUS 0x10000000 /* setup status bit */ +#define SETADDR_STATUS 0x08000000 /* setupup address status bit */ +#define NO_REQ 0x04000000 /* Frame without request */ +#define HOST_DATA 0x02000000 /* Host data frame */ +#define FIRST_PACKET_IN_FRAME 0x01000000 /* first packet in the frame */ +#define TOKEN_FRAME 0x00800000 /* Host token frame */ +#define ZLP 0x00400000 /* Zero length packet */ +#define IN_TOKEN_FRAME 0x00200000 /* In token package */ +#define OUT_TOKEN_FRAME 0x00100000 /* Out token package */ +#define SETUP_TOKEN_FRAME 0x00080000 /* Setup token package */ +#define STALL_FRAME 0x00040000 /* Stall handshake */ +#define NACK_FRAME 0x00020000 /* Nack handshake */ +#define NO_PID 0x00010000 /* No send PID */ +#define NO_CRC 0x00008000 /* No send CRC */ +#define HOST_COMMAND 0x00004000 /* Host command frame */ + +/* Frame status field */ +/* Receive side */ +#define FRAME_OK 0x00000000 /* Frame transmitted or received OK */ +#define FRAME_ERROR 0x80000000 /* Error occurred on frame */ +#define START_FRAME_LOST 0x40000000 /* START_FRAME_LOST */ +#define END_FRAME_LOST 0x20000000 /* END_FRAME_LOST */ +#define RX_ER_NONOCT 0x10000000 /* Rx Non Octet Aligned Packet */ +#define RX_ER_BITSTUFF 0x08000000 /* Frame Aborted --Received packet + with bit stuff error */ +#define RX_ER_CRC 0x04000000 /* Received packet with CRC error */ +#define RX_ER_OVERUN 0x02000000 /* Over-run occurred on reception */ +#define RX_ER_PID 0x01000000 /* Wrong PID received */ +/* Tranmit side */ +#define TX_ER_NAK 0x00800000 /* Received NAK handshake */ +#define TX_ER_STALL 0x00400000 /* Received STALL handshake */ +#define TX_ER_TIMEOUT 0x00200000 /* Transmit time out */ +#define TX_ER_UNDERUN 0x00100000 /* Transmit underrun */ +#define FRAME_INPROGRESS 0x00080000 /* Frame is being transmitted */ +#define ER_DATA_UNDERUN 0x00040000 /* Frame is shorter then expected */ +#define ER_DATA_OVERUN 0x00020000 /* Frame is longer then expected */ + +/* QE USB frame operation functions */ +#define frame_get_length(frm) (frm->len) +#define frame_set_length(frm, leng) (frm->len = leng) +#define frame_get_data(frm) (frm->data) +#define frame_set_data(frm, dat) (frm->data = dat) +#define frame_get_info(frm) (frm->info) +#define frame_set_info(frm, inf) (frm->info = inf) +#define frame_get_status(frm) (frm->status) +#define frame_set_status(frm, stat) (frm->status = stat) +#define frame_get_privdata(frm) (frm->privdata) +#define frame_set_privdata(frm, dat) (frm->privdata = dat) + +static inline void qe_frame_clean(struct qe_frame *frm) +{ + frame_set_data(frm, NULL); + frame_set_length(frm, 0); + frame_set_status(frm, FRAME_OK); + frame_set_info(frm, 0); + frame_set_privdata(frm, NULL); +} + +static inline void qe_frame_init(struct qe_frame *frm) +{ + qe_frame_clean(frm); + INIT_LIST_HEAD(&(frm->node)); +} + +struct qe_req { + struct usb_request req; + struct list_head queue; + /* ep_queue() func will add + a request->queue into a udc_ep->queue 'd tail */ + struct qe_ep *ep; + unsigned mapped:1; +}; + +struct qe_ep { + struct usb_ep ep; + struct list_head queue; + struct qe_udc *udc; + struct usb_gadget *gadget; + + u8 state; + + struct qe_bd __iomem *rxbase; + struct qe_bd __iomem *n_rxbd; + struct qe_bd __iomem *e_rxbd; + + struct qe_bd __iomem *txbase; + struct qe_bd __iomem *n_txbd; + struct qe_bd __iomem *c_txbd; + + struct qe_frame *rxframe; + u8 *rxbuffer; + dma_addr_t rxbuf_d; + u8 rxbufmap; + unsigned char localnack; + int has_data; + + struct qe_frame *txframe; + struct qe_req *tx_req; + int sent; /*data already sent */ + int last; /*data sent in the last time*/ + + u8 dir; + u8 epnum; + u8 tm; /* transfer mode */ + u8 data01; + u8 init; + + u8 already_seen; + u8 enable_tasklet; + u8 setup_stage; + u32 last_io; /* timestamp */ + + char name[14]; + + unsigned double_buf:1; + unsigned stopped:1; + unsigned fnf:1; + unsigned has_dma:1; + + u8 ackwait; + u8 dma_channel; + u16 dma_counter; + int lch; + + struct timer_list timer; +}; + +struct qe_udc { + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + struct device *dev; + struct qe_ep eps[USB_MAX_ENDPOINTS]; + struct usb_ctrlrequest local_setup_buff; + spinlock_t lock; /* lock for set/config qe_udc */ + unsigned long soc_type; /* QE or CPM soc */ + + struct qe_req *status_req; /* ep0 status request */ + + /* USB and EP Parameter Block pointer */ + struct usb_device_para __iomem *usb_param; + struct usb_ep_para __iomem *ep_param[4]; + + u32 max_pipes; /* Device max pipes */ + u32 max_use_endpts; /* Max endpointes to be used */ + u32 bus_reset; /* Device is bus reseting */ + u32 resume_state; /* USB state to resume*/ + u32 usb_state; /* USB current state */ + u32 usb_next_state; /* USB next state */ + u32 ep0_state; /* Endpoint zero state */ + u32 ep0_dir; /* Endpoint zero direction: can be + USB_DIR_IN or USB_DIR_OUT*/ + u32 usb_sof_count; /* SOF count */ + u32 errors; /* USB ERRORs count */ + + u8 *tmpbuf; + u32 c_start; + u32 c_end; + + u8 *nullbuf; + u8 *statusbuf; + dma_addr_t nullp; + u8 nullmap; + u8 device_address; /* Device USB address */ + + unsigned int usb_clock; + unsigned int usb_irq; + struct usb_ctlr __iomem *usb_regs; + + struct tasklet_struct rx_tasklet; + + struct completion *done; /* to make sure release() is done */ +}; + +#define EP_STATE_IDLE 0 +#define EP_STATE_NACK 1 +#define EP_STATE_STALL 2 + +/* + * transmit BD's status + */ +#define T_R 0x80000000 /* ready bit */ +#define T_W 0x20000000 /* wrap bit */ +#define T_I 0x10000000 /* interrupt on completion */ +#define T_L 0x08000000 /* last */ +#define T_TC 0x04000000 /* transmit CRC */ +#define T_CNF 0x02000000 /* wait for transmit confirm */ +#define T_LSP 0x01000000 /* Low-speed transaction */ +#define T_PID 0x00c00000 /* packet id */ +#define T_NAK 0x00100000 /* No ack. */ +#define T_STAL 0x00080000 /* Stall received */ +#define T_TO 0x00040000 /* time out */ +#define T_UN 0x00020000 /* underrun */ + +#define DEVICE_T_ERROR (T_UN | T_TO) +#define HOST_T_ERROR (T_UN | T_TO | T_NAK | T_STAL) +#define DEVICE_T_BD_MASK DEVICE_T_ERROR +#define HOST_T_BD_MASK HOST_T_ERROR + +#define T_PID_SHIFT 6 +#define T_PID_DATA0 0x00800000 /* Data 0 toggle */ +#define T_PID_DATA1 0x00c00000 /* Data 1 toggle */ + +/* + * receive BD's status + */ +#define R_E 0x80000000 /* buffer empty */ +#define R_W 0x20000000 /* wrap bit */ +#define R_I 0x10000000 /* interrupt on reception */ +#define R_L 0x08000000 /* last */ +#define R_F 0x04000000 /* first */ +#define R_PID 0x00c00000 /* packet id */ +#define R_NO 0x00100000 /* Rx Non Octet Aligned Packet */ +#define R_AB 0x00080000 /* Frame Aborted */ +#define R_CR 0x00040000 /* CRC Error */ +#define R_OV 0x00020000 /* Overrun */ + +#define R_ERROR (R_NO | R_AB | R_CR | R_OV) +#define R_BD_MASK R_ERROR + +#define R_PID_DATA0 0x00000000 +#define R_PID_DATA1 0x00400000 +#define R_PID_SETUP 0x00800000 + +#define CPM_USB_STOP_TX 0x2e600000 +#define CPM_USB_RESTART_TX 0x2e600000 +#define CPM_USB_STOP_TX_OPCODE 0x0a +#define CPM_USB_RESTART_TX_OPCODE 0x0b +#define CPM_USB_EP_SHIFT 5 + +#endif /* __FSL_QE_UDC_H */ diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c new file mode 100644 index 000000000..a67873a07 --- /dev/null +++ b/drivers/usb/gadget/udc/fsl_udc_core.c @@ -0,0 +1,2688 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2004-2007,2011-2012 Freescale Semiconductor, Inc. + * All rights reserved. + * + * Author: Li Yang <leoli@freescale.com> + * Jiang Bo <tanya.jiang@freescale.com> + * + * Description: + * Freescale high-speed USB SOC DR module device controller driver. + * This can be found on MPC8349E/MPC8313E/MPC5121E cpus. + * The driver is previously named as mpc_udc. Based on bare board + * code from Dave Liu and Shlomi Gridish. + */ + +#undef VERBOSE + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/mm.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/otg.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/fsl_devices.h> +#include <linux/dmapool.h> +#include <linux/of_device.h> + +#include <asm/byteorder.h> +#include <asm/io.h> +#include <asm/unaligned.h> +#include <asm/dma.h> + +#include "fsl_usb2_udc.h" + +#define DRIVER_DESC "Freescale High-Speed USB SOC Device Controller driver" +#define DRIVER_AUTHOR "Li Yang/Jiang Bo" +#define DRIVER_VERSION "Apr 20, 2007" + +#define DMA_ADDR_INVALID (~(dma_addr_t)0) + +static const char driver_name[] = "fsl-usb2-udc"; + +static struct usb_dr_device __iomem *dr_regs; + +static struct usb_sys_interface __iomem *usb_sys_regs; + +/* it is initialized in probe() */ +static struct fsl_udc *udc_controller = NULL; + +static const struct usb_endpoint_descriptor +fsl_ep0_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 0, + .bmAttributes = USB_ENDPOINT_XFER_CONTROL, + .wMaxPacketSize = USB_MAX_CTRL_PAYLOAD, +}; + +static void fsl_ep_fifo_flush(struct usb_ep *_ep); + +#ifdef CONFIG_PPC32 +/* + * On some SoCs, the USB controller registers can be big or little endian, + * depending on the version of the chip. In order to be able to run the + * same kernel binary on 2 different versions of an SoC, the BE/LE decision + * must be made at run time. _fsl_readl and fsl_writel are pointers to the + * BE or LE readl() and writel() functions, and fsl_readl() and fsl_writel() + * call through those pointers. Platform code for SoCs that have BE USB + * registers should set pdata->big_endian_mmio flag. + * + * This also applies to controller-to-cpu accessors for the USB descriptors, + * since their endianness is also SoC dependant. Platform code for SoCs that + * have BE USB descriptors should set pdata->big_endian_desc flag. + */ +static u32 _fsl_readl_be(const unsigned __iomem *p) +{ + return in_be32(p); +} + +static u32 _fsl_readl_le(const unsigned __iomem *p) +{ + return in_le32(p); +} + +static void _fsl_writel_be(u32 v, unsigned __iomem *p) +{ + out_be32(p, v); +} + +static void _fsl_writel_le(u32 v, unsigned __iomem *p) +{ + out_le32(p, v); +} + +static u32 (*_fsl_readl)(const unsigned __iomem *p); +static void (*_fsl_writel)(u32 v, unsigned __iomem *p); + +#define fsl_readl(p) (*_fsl_readl)((p)) +#define fsl_writel(v, p) (*_fsl_writel)((v), (p)) + +static inline void fsl_set_accessors(struct fsl_usb2_platform_data *pdata) +{ + if (pdata->big_endian_mmio) { + _fsl_readl = _fsl_readl_be; + _fsl_writel = _fsl_writel_be; + } else { + _fsl_readl = _fsl_readl_le; + _fsl_writel = _fsl_writel_le; + } +} + +static inline u32 cpu_to_hc32(const u32 x) +{ + return udc_controller->pdata->big_endian_desc + ? (__force u32)cpu_to_be32(x) + : (__force u32)cpu_to_le32(x); +} + +static inline u32 hc32_to_cpu(const u32 x) +{ + return udc_controller->pdata->big_endian_desc + ? be32_to_cpu((__force __be32)x) + : le32_to_cpu((__force __le32)x); +} +#else /* !CONFIG_PPC32 */ +static inline void fsl_set_accessors(struct fsl_usb2_platform_data *pdata) {} + +#define fsl_readl(addr) readl(addr) +#define fsl_writel(val32, addr) writel(val32, addr) +#define cpu_to_hc32(x) cpu_to_le32(x) +#define hc32_to_cpu(x) le32_to_cpu(x) +#endif /* CONFIG_PPC32 */ + +/******************************************************************** + * Internal Used Function +********************************************************************/ +/*----------------------------------------------------------------- + * done() - retire a request; caller blocked irqs + * @status : request status to be set, only works when + * request is still in progress. + *--------------------------------------------------------------*/ +static void done(struct fsl_ep *ep, struct fsl_req *req, int status) +__releases(ep->udc->lock) +__acquires(ep->udc->lock) +{ + struct fsl_udc *udc = NULL; + unsigned char stopped = ep->stopped; + struct ep_td_struct *curr_td, *next_td; + int j; + + udc = (struct fsl_udc *)ep->udc; + /* Removed the req from fsl_ep->queue */ + list_del_init(&req->queue); + + /* req.status should be set as -EINPROGRESS in ep_queue() */ + if (req->req.status == -EINPROGRESS) + req->req.status = status; + else + status = req->req.status; + + /* Free dtd for the request */ + next_td = req->head; + for (j = 0; j < req->dtd_count; j++) { + curr_td = next_td; + if (j != req->dtd_count - 1) { + next_td = curr_td->next_td_virt; + } + dma_pool_free(udc->td_pool, curr_td, curr_td->td_dma); + } + + usb_gadget_unmap_request(&ep->udc->gadget, &req->req, ep_is_in(ep)); + + if (status && (status != -ESHUTDOWN)) + VDBG("complete %s req %p stat %d len %u/%u", + ep->ep.name, &req->req, status, + req->req.actual, req->req.length); + + ep->stopped = 1; + + spin_unlock(&ep->udc->lock); + + usb_gadget_giveback_request(&ep->ep, &req->req); + + spin_lock(&ep->udc->lock); + ep->stopped = stopped; +} + +/*----------------------------------------------------------------- + * nuke(): delete all requests related to this ep + * called with spinlock held + *--------------------------------------------------------------*/ +static void nuke(struct fsl_ep *ep, int status) +{ + ep->stopped = 1; + + /* Flush fifo */ + fsl_ep_fifo_flush(&ep->ep); + + /* Whether this eq has request linked */ + while (!list_empty(&ep->queue)) { + struct fsl_req *req = NULL; + + req = list_entry(ep->queue.next, struct fsl_req, queue); + done(ep, req, status); + } +} + +/*------------------------------------------------------------------ + Internal Hardware related function + ------------------------------------------------------------------*/ + +static int dr_controller_setup(struct fsl_udc *udc) +{ + unsigned int tmp, portctrl, ep_num; + unsigned int max_no_of_ep; + unsigned int ctrl; + unsigned long timeout; + +#define FSL_UDC_RESET_TIMEOUT 1000 + + /* Config PHY interface */ + portctrl = fsl_readl(&dr_regs->portsc1); + portctrl &= ~(PORTSCX_PHY_TYPE_SEL | PORTSCX_PORT_WIDTH); + switch (udc->phy_mode) { + case FSL_USB2_PHY_ULPI: + if (udc->pdata->have_sysif_regs) { + if (udc->pdata->controller_ver) { + /* controller version 1.6 or above */ + ctrl = __raw_readl(&usb_sys_regs->control); + ctrl &= ~USB_CTRL_UTMI_PHY_EN; + ctrl |= USB_CTRL_USB_EN; + __raw_writel(ctrl, &usb_sys_regs->control); + } + } + portctrl |= PORTSCX_PTS_ULPI; + break; + case FSL_USB2_PHY_UTMI_WIDE: + portctrl |= PORTSCX_PTW_16BIT; + fallthrough; + case FSL_USB2_PHY_UTMI: + case FSL_USB2_PHY_UTMI_DUAL: + if (udc->pdata->have_sysif_regs) { + if (udc->pdata->controller_ver) { + /* controller version 1.6 or above */ + ctrl = __raw_readl(&usb_sys_regs->control); + ctrl |= (USB_CTRL_UTMI_PHY_EN | + USB_CTRL_USB_EN); + __raw_writel(ctrl, &usb_sys_regs->control); + mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI + PHY CLK to become stable - 10ms*/ + } + } + portctrl |= PORTSCX_PTS_UTMI; + break; + case FSL_USB2_PHY_SERIAL: + portctrl |= PORTSCX_PTS_FSLS; + break; + default: + return -EINVAL; + } + fsl_writel(portctrl, &dr_regs->portsc1); + + /* Stop and reset the usb controller */ + tmp = fsl_readl(&dr_regs->usbcmd); + tmp &= ~USB_CMD_RUN_STOP; + fsl_writel(tmp, &dr_regs->usbcmd); + + tmp = fsl_readl(&dr_regs->usbcmd); + tmp |= USB_CMD_CTRL_RESET; + fsl_writel(tmp, &dr_regs->usbcmd); + + /* Wait for reset to complete */ + timeout = jiffies + FSL_UDC_RESET_TIMEOUT; + while (fsl_readl(&dr_regs->usbcmd) & USB_CMD_CTRL_RESET) { + if (time_after(jiffies, timeout)) { + ERR("udc reset timeout!\n"); + return -ETIMEDOUT; + } + cpu_relax(); + } + + /* Set the controller as device mode */ + tmp = fsl_readl(&dr_regs->usbmode); + tmp &= ~USB_MODE_CTRL_MODE_MASK; /* clear mode bits */ + tmp |= USB_MODE_CTRL_MODE_DEVICE; + /* Disable Setup Lockout */ + tmp |= USB_MODE_SETUP_LOCK_OFF; + if (udc->pdata->es) + tmp |= USB_MODE_ES; + fsl_writel(tmp, &dr_regs->usbmode); + + /* Clear the setup status */ + fsl_writel(0, &dr_regs->usbsts); + + tmp = udc->ep_qh_dma; + tmp &= USB_EP_LIST_ADDRESS_MASK; + fsl_writel(tmp, &dr_regs->endpointlistaddr); + + VDBG("vir[qh_base] is %p phy[qh_base] is 0x%8x reg is 0x%8x", + udc->ep_qh, (int)tmp, + fsl_readl(&dr_regs->endpointlistaddr)); + + max_no_of_ep = (0x0000001F & fsl_readl(&dr_regs->dccparams)); + for (ep_num = 1; ep_num < max_no_of_ep; ep_num++) { + tmp = fsl_readl(&dr_regs->endptctrl[ep_num]); + tmp &= ~(EPCTRL_TX_TYPE | EPCTRL_RX_TYPE); + tmp |= (EPCTRL_EP_TYPE_BULK << EPCTRL_TX_EP_TYPE_SHIFT) + | (EPCTRL_EP_TYPE_BULK << EPCTRL_RX_EP_TYPE_SHIFT); + fsl_writel(tmp, &dr_regs->endptctrl[ep_num]); + } + /* Config control enable i/o output, cpu endian register */ + if (udc->pdata->have_sysif_regs) { + ctrl = __raw_readl(&usb_sys_regs->control); + ctrl |= USB_CTRL_IOENB; + __raw_writel(ctrl, &usb_sys_regs->control); + } + +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + /* Turn on cache snooping hardware, since some PowerPC platforms + * wholly rely on hardware to deal with cache coherent. */ + + if (udc->pdata->have_sysif_regs) { + /* Setup Snooping for all the 4GB space */ + tmp = SNOOP_SIZE_2GB; /* starts from 0x0, size 2G */ + __raw_writel(tmp, &usb_sys_regs->snoop1); + tmp |= 0x80000000; /* starts from 0x8000000, size 2G */ + __raw_writel(tmp, &usb_sys_regs->snoop2); + } +#endif + + return 0; +} + +/* Enable DR irq and set controller to run state */ +static void dr_controller_run(struct fsl_udc *udc) +{ + u32 temp; + + /* Enable DR irq reg */ + temp = USB_INTR_INT_EN | USB_INTR_ERR_INT_EN + | USB_INTR_PTC_DETECT_EN | USB_INTR_RESET_EN + | USB_INTR_DEVICE_SUSPEND | USB_INTR_SYS_ERR_EN; + + fsl_writel(temp, &dr_regs->usbintr); + + /* Clear stopped bit */ + udc->stopped = 0; + + /* Set the controller as device mode */ + temp = fsl_readl(&dr_regs->usbmode); + temp |= USB_MODE_CTRL_MODE_DEVICE; + fsl_writel(temp, &dr_regs->usbmode); + + /* Set controller to Run */ + temp = fsl_readl(&dr_regs->usbcmd); + temp |= USB_CMD_RUN_STOP; + fsl_writel(temp, &dr_regs->usbcmd); +} + +static void dr_controller_stop(struct fsl_udc *udc) +{ + unsigned int tmp; + + pr_debug("%s\n", __func__); + + /* if we're in OTG mode, and the Host is currently using the port, + * stop now and don't rip the controller out from under the + * ehci driver + */ + if (udc->gadget.is_otg) { + if (!(fsl_readl(&dr_regs->otgsc) & OTGSC_STS_USB_ID)) { + pr_debug("udc: Leaving early\n"); + return; + } + } + + /* disable all INTR */ + fsl_writel(0, &dr_regs->usbintr); + + /* Set stopped bit for isr */ + udc->stopped = 1; + + /* disable IO output */ +/* usb_sys_regs->control = 0; */ + + /* set controller to Stop */ + tmp = fsl_readl(&dr_regs->usbcmd); + tmp &= ~USB_CMD_RUN_STOP; + fsl_writel(tmp, &dr_regs->usbcmd); +} + +static void dr_ep_setup(unsigned char ep_num, unsigned char dir, + unsigned char ep_type) +{ + unsigned int tmp_epctrl = 0; + + tmp_epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); + if (dir) { + if (ep_num) + tmp_epctrl |= EPCTRL_TX_DATA_TOGGLE_RST; + tmp_epctrl |= EPCTRL_TX_ENABLE; + tmp_epctrl &= ~EPCTRL_TX_TYPE; + tmp_epctrl |= ((unsigned int)(ep_type) + << EPCTRL_TX_EP_TYPE_SHIFT); + } else { + if (ep_num) + tmp_epctrl |= EPCTRL_RX_DATA_TOGGLE_RST; + tmp_epctrl |= EPCTRL_RX_ENABLE; + tmp_epctrl &= ~EPCTRL_RX_TYPE; + tmp_epctrl |= ((unsigned int)(ep_type) + << EPCTRL_RX_EP_TYPE_SHIFT); + } + + fsl_writel(tmp_epctrl, &dr_regs->endptctrl[ep_num]); +} + +static void +dr_ep_change_stall(unsigned char ep_num, unsigned char dir, int value) +{ + u32 tmp_epctrl = 0; + + tmp_epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); + + if (value) { + /* set the stall bit */ + if (dir) + tmp_epctrl |= EPCTRL_TX_EP_STALL; + else + tmp_epctrl |= EPCTRL_RX_EP_STALL; + } else { + /* clear the stall bit and reset data toggle */ + if (dir) { + tmp_epctrl &= ~EPCTRL_TX_EP_STALL; + tmp_epctrl |= EPCTRL_TX_DATA_TOGGLE_RST; + } else { + tmp_epctrl &= ~EPCTRL_RX_EP_STALL; + tmp_epctrl |= EPCTRL_RX_DATA_TOGGLE_RST; + } + } + fsl_writel(tmp_epctrl, &dr_regs->endptctrl[ep_num]); +} + +/* Get stall status of a specific ep + Return: 0: not stalled; 1:stalled */ +static int dr_ep_get_stall(unsigned char ep_num, unsigned char dir) +{ + u32 epctrl; + + epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); + if (dir) + return (epctrl & EPCTRL_TX_EP_STALL) ? 1 : 0; + else + return (epctrl & EPCTRL_RX_EP_STALL) ? 1 : 0; +} + +/******************************************************************** + Internal Structure Build up functions +********************************************************************/ + +/*------------------------------------------------------------------ +* struct_ep_qh_setup(): set the Endpoint Capabilites field of QH + * @zlt: Zero Length Termination Select (1: disable; 0: enable) + * @mult: Mult field + ------------------------------------------------------------------*/ +static void struct_ep_qh_setup(struct fsl_udc *udc, unsigned char ep_num, + unsigned char dir, unsigned char ep_type, + unsigned int max_pkt_len, + unsigned int zlt, unsigned char mult) +{ + struct ep_queue_head *p_QH = &udc->ep_qh[2 * ep_num + dir]; + unsigned int tmp = 0; + + /* set the Endpoint Capabilites in QH */ + switch (ep_type) { + case USB_ENDPOINT_XFER_CONTROL: + /* Interrupt On Setup (IOS). for control ep */ + tmp = (max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS) + | EP_QUEUE_HEAD_IOS; + break; + case USB_ENDPOINT_XFER_ISOC: + tmp = (max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS) + | (mult << EP_QUEUE_HEAD_MULT_POS); + break; + case USB_ENDPOINT_XFER_BULK: + case USB_ENDPOINT_XFER_INT: + tmp = max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS; + break; + default: + VDBG("error ep type is %d", ep_type); + return; + } + if (zlt) + tmp |= EP_QUEUE_HEAD_ZLT_SEL; + + p_QH->max_pkt_length = cpu_to_hc32(tmp); + p_QH->next_dtd_ptr = 1; + p_QH->size_ioc_int_sts = 0; +} + +/* Setup qh structure and ep register for ep0. */ +static void ep0_setup(struct fsl_udc *udc) +{ + /* the initialization of an ep includes: fields in QH, Regs, + * fsl_ep struct */ + struct_ep_qh_setup(udc, 0, USB_RECV, USB_ENDPOINT_XFER_CONTROL, + USB_MAX_CTRL_PAYLOAD, 0, 0); + struct_ep_qh_setup(udc, 0, USB_SEND, USB_ENDPOINT_XFER_CONTROL, + USB_MAX_CTRL_PAYLOAD, 0, 0); + dr_ep_setup(0, USB_RECV, USB_ENDPOINT_XFER_CONTROL); + dr_ep_setup(0, USB_SEND, USB_ENDPOINT_XFER_CONTROL); + + return; + +} + +/*********************************************************************** + Endpoint Management Functions +***********************************************************************/ + +/*------------------------------------------------------------------------- + * when configurations are set, or when interface settings change + * for example the do_set_interface() in gadget layer, + * the driver will enable or disable the relevant endpoints + * ep0 doesn't use this routine. It is always enabled. +-------------------------------------------------------------------------*/ +static int fsl_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct fsl_udc *udc = NULL; + struct fsl_ep *ep = NULL; + unsigned short max = 0; + unsigned char mult = 0, zlt; + int retval = -EINVAL; + unsigned long flags; + + ep = container_of(_ep, struct fsl_ep, ep); + + /* catch various bogus parameters */ + if (!_ep || !desc + || (desc->bDescriptorType != USB_DT_ENDPOINT)) + return -EINVAL; + + udc = ep->udc; + + if (!udc->driver || (udc->gadget.speed == USB_SPEED_UNKNOWN)) + return -ESHUTDOWN; + + max = usb_endpoint_maxp(desc); + + /* Disable automatic zlp generation. Driver is responsible to indicate + * explicitly through req->req.zero. This is needed to enable multi-td + * request. */ + zlt = 1; + + /* Assume the max packet size from gadget is always correct */ + switch (desc->bmAttributes & 0x03) { + case USB_ENDPOINT_XFER_CONTROL: + case USB_ENDPOINT_XFER_BULK: + case USB_ENDPOINT_XFER_INT: + /* mult = 0. Execute N Transactions as demonstrated by + * the USB variable length packet protocol where N is + * computed using the Maximum Packet Length (dQH) and + * the Total Bytes field (dTD) */ + mult = 0; + break; + case USB_ENDPOINT_XFER_ISOC: + /* Calculate transactions needed for high bandwidth iso */ + mult = usb_endpoint_maxp_mult(desc); + /* 3 transactions at most */ + if (mult > 3) + goto en_done; + break; + default: + goto en_done; + } + + spin_lock_irqsave(&udc->lock, flags); + ep->ep.maxpacket = max; + ep->ep.desc = desc; + ep->stopped = 0; + + /* Controller related setup */ + /* Init EPx Queue Head (Ep Capabilites field in QH + * according to max, zlt, mult) */ + struct_ep_qh_setup(udc, (unsigned char) ep_index(ep), + (unsigned char) ((desc->bEndpointAddress & USB_DIR_IN) + ? USB_SEND : USB_RECV), + (unsigned char) (desc->bmAttributes + & USB_ENDPOINT_XFERTYPE_MASK), + max, zlt, mult); + + /* Init endpoint ctrl register */ + dr_ep_setup((unsigned char) ep_index(ep), + (unsigned char) ((desc->bEndpointAddress & USB_DIR_IN) + ? USB_SEND : USB_RECV), + (unsigned char) (desc->bmAttributes + & USB_ENDPOINT_XFERTYPE_MASK)); + + spin_unlock_irqrestore(&udc->lock, flags); + retval = 0; + + VDBG("enabled %s (ep%d%s) maxpacket %d",ep->ep.name, + ep->ep.desc->bEndpointAddress & 0x0f, + (desc->bEndpointAddress & USB_DIR_IN) + ? "in" : "out", max); +en_done: + return retval; +} + +/*--------------------------------------------------------------------- + * @ep : the ep being unconfigured. May not be ep0 + * Any pending and uncomplete req will complete with status (-ESHUTDOWN) +*---------------------------------------------------------------------*/ +static int fsl_ep_disable(struct usb_ep *_ep) +{ + struct fsl_udc *udc = NULL; + struct fsl_ep *ep = NULL; + unsigned long flags; + u32 epctrl; + int ep_num; + + ep = container_of(_ep, struct fsl_ep, ep); + if (!_ep || !ep->ep.desc) { + VDBG("%s not enabled", _ep ? ep->ep.name : NULL); + return -EINVAL; + } + + /* disable ep on controller */ + ep_num = ep_index(ep); + epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); + if (ep_is_in(ep)) { + epctrl &= ~(EPCTRL_TX_ENABLE | EPCTRL_TX_TYPE); + epctrl |= EPCTRL_EP_TYPE_BULK << EPCTRL_TX_EP_TYPE_SHIFT; + } else { + epctrl &= ~(EPCTRL_RX_ENABLE | EPCTRL_TX_TYPE); + epctrl |= EPCTRL_EP_TYPE_BULK << EPCTRL_RX_EP_TYPE_SHIFT; + } + fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]); + + udc = (struct fsl_udc *)ep->udc; + spin_lock_irqsave(&udc->lock, flags); + + /* nuke all pending requests (does flush) */ + nuke(ep, -ESHUTDOWN); + + ep->ep.desc = NULL; + ep->stopped = 1; + spin_unlock_irqrestore(&udc->lock, flags); + + VDBG("disabled %s OK", _ep->name); + return 0; +} + +/*--------------------------------------------------------------------- + * allocate a request object used by this endpoint + * the main operation is to insert the req->queue to the eq->queue + * Returns the request, or null if one could not be allocated +*---------------------------------------------------------------------*/ +static struct usb_request * +fsl_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) +{ + struct fsl_req *req = NULL; + + req = kzalloc(sizeof *req, gfp_flags); + if (!req) + return NULL; + + req->req.dma = DMA_ADDR_INVALID; + INIT_LIST_HEAD(&req->queue); + + return &req->req; +} + +static void fsl_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct fsl_req *req = NULL; + + req = container_of(_req, struct fsl_req, req); + + if (_req) + kfree(req); +} + +/* Actually add a dTD chain to an empty dQH and let go */ +static void fsl_prime_ep(struct fsl_ep *ep, struct ep_td_struct *td) +{ + struct ep_queue_head *qh = get_qh_by_ep(ep); + + /* Write dQH next pointer and terminate bit to 0 */ + qh->next_dtd_ptr = cpu_to_hc32(td->td_dma + & EP_QUEUE_HEAD_NEXT_POINTER_MASK); + + /* Clear active and halt bit */ + qh->size_ioc_int_sts &= cpu_to_hc32(~(EP_QUEUE_HEAD_STATUS_ACTIVE + | EP_QUEUE_HEAD_STATUS_HALT)); + + /* Ensure that updates to the QH will occur before priming. */ + wmb(); + + /* Prime endpoint by writing correct bit to ENDPTPRIME */ + fsl_writel(ep_is_in(ep) ? (1 << (ep_index(ep) + 16)) + : (1 << (ep_index(ep))), &dr_regs->endpointprime); +} + +/* Add dTD chain to the dQH of an EP */ +static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req) +{ + u32 temp, bitmask, tmp_stat; + + /* VDBG("QH addr Register 0x%8x", dr_regs->endpointlistaddr); + VDBG("ep_qh[%d] addr is 0x%8x", i, (u32)&(ep->udc->ep_qh[i])); */ + + bitmask = ep_is_in(ep) + ? (1 << (ep_index(ep) + 16)) + : (1 << (ep_index(ep))); + + /* check if the pipe is empty */ + if (!(list_empty(&ep->queue)) && !(ep_index(ep) == 0)) { + /* Add td to the end */ + struct fsl_req *lastreq; + lastreq = list_entry(ep->queue.prev, struct fsl_req, queue); + lastreq->tail->next_td_ptr = + cpu_to_hc32(req->head->td_dma & DTD_ADDR_MASK); + /* Ensure dTD's next dtd pointer to be updated */ + wmb(); + /* Read prime bit, if 1 goto done */ + if (fsl_readl(&dr_regs->endpointprime) & bitmask) + return; + + do { + /* Set ATDTW bit in USBCMD */ + temp = fsl_readl(&dr_regs->usbcmd); + fsl_writel(temp | USB_CMD_ATDTW, &dr_regs->usbcmd); + + /* Read correct status bit */ + tmp_stat = fsl_readl(&dr_regs->endptstatus) & bitmask; + + } while (!(fsl_readl(&dr_regs->usbcmd) & USB_CMD_ATDTW)); + + /* Write ATDTW bit to 0 */ + temp = fsl_readl(&dr_regs->usbcmd); + fsl_writel(temp & ~USB_CMD_ATDTW, &dr_regs->usbcmd); + + if (tmp_stat) + return; + } + + fsl_prime_ep(ep, req->head); +} + +/* Fill in the dTD structure + * @req: request that the transfer belongs to + * @length: return actually data length of the dTD + * @dma: return dma address of the dTD + * @is_last: return flag if it is the last dTD of the request + * return: pointer to the built dTD */ +static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length, + dma_addr_t *dma, int *is_last, gfp_t gfp_flags) +{ + u32 swap_temp; + struct ep_td_struct *dtd; + + /* how big will this transfer be? */ + *length = min(req->req.length - req->req.actual, + (unsigned)EP_MAX_LENGTH_TRANSFER); + + dtd = dma_pool_alloc(udc_controller->td_pool, gfp_flags, dma); + if (dtd == NULL) + return dtd; + + dtd->td_dma = *dma; + /* Clear reserved field */ + swap_temp = hc32_to_cpu(dtd->size_ioc_sts); + swap_temp &= ~DTD_RESERVED_FIELDS; + dtd->size_ioc_sts = cpu_to_hc32(swap_temp); + + /* Init all of buffer page pointers */ + swap_temp = (u32) (req->req.dma + req->req.actual); + dtd->buff_ptr0 = cpu_to_hc32(swap_temp); + dtd->buff_ptr1 = cpu_to_hc32(swap_temp + 0x1000); + dtd->buff_ptr2 = cpu_to_hc32(swap_temp + 0x2000); + dtd->buff_ptr3 = cpu_to_hc32(swap_temp + 0x3000); + dtd->buff_ptr4 = cpu_to_hc32(swap_temp + 0x4000); + + req->req.actual += *length; + + /* zlp is needed if req->req.zero is set */ + if (req->req.zero) { + if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0) + *is_last = 1; + else + *is_last = 0; + } else if (req->req.length == req->req.actual) + *is_last = 1; + else + *is_last = 0; + + if ((*is_last) == 0) + VDBG("multi-dtd request!"); + /* Fill in the transfer size; set active bit */ + swap_temp = ((*length << DTD_LENGTH_BIT_POS) | DTD_STATUS_ACTIVE); + + /* Enable interrupt for the last dtd of a request */ + if (*is_last && !req->req.no_interrupt) + swap_temp |= DTD_IOC; + + dtd->size_ioc_sts = cpu_to_hc32(swap_temp); + + mb(); + + VDBG("length = %d address= 0x%x", *length, (int)*dma); + + return dtd; +} + +/* Generate dtd chain for a request */ +static int fsl_req_to_dtd(struct fsl_req *req, gfp_t gfp_flags) +{ + unsigned count; + int is_last; + int is_first =1; + struct ep_td_struct *last_dtd = NULL, *dtd; + dma_addr_t dma; + + do { + dtd = fsl_build_dtd(req, &count, &dma, &is_last, gfp_flags); + if (dtd == NULL) + return -ENOMEM; + + if (is_first) { + is_first = 0; + req->head = dtd; + } else { + last_dtd->next_td_ptr = cpu_to_hc32(dma); + last_dtd->next_td_virt = dtd; + } + last_dtd = dtd; + + req->dtd_count++; + } while (!is_last); + + dtd->next_td_ptr = cpu_to_hc32(DTD_NEXT_TERMINATE); + + req->tail = dtd; + + return 0; +} + +/* queues (submits) an I/O request to an endpoint */ +static int +fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) +{ + struct fsl_ep *ep = container_of(_ep, struct fsl_ep, ep); + struct fsl_req *req = container_of(_req, struct fsl_req, req); + struct fsl_udc *udc; + unsigned long flags; + int ret; + + /* catch various bogus parameters */ + if (!_req || !req->req.complete || !req->req.buf + || !list_empty(&req->queue)) { + VDBG("%s, bad params", __func__); + return -EINVAL; + } + if (unlikely(!_ep || !ep->ep.desc)) { + VDBG("%s, bad ep", __func__); + return -EINVAL; + } + if (usb_endpoint_xfer_isoc(ep->ep.desc)) { + if (req->req.length > ep->ep.maxpacket) + return -EMSGSIZE; + } + + udc = ep->udc; + if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + req->ep = ep; + + ret = usb_gadget_map_request(&ep->udc->gadget, &req->req, ep_is_in(ep)); + if (ret) + return ret; + + req->req.status = -EINPROGRESS; + req->req.actual = 0; + req->dtd_count = 0; + + /* build dtds and push them to device queue */ + if (!fsl_req_to_dtd(req, gfp_flags)) { + spin_lock_irqsave(&udc->lock, flags); + fsl_queue_td(ep, req); + } else { + return -ENOMEM; + } + + /* irq handler advances the queue */ + if (req != NULL) + list_add_tail(&req->queue, &ep->queue); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +/* dequeues (cancels, unlinks) an I/O request from an endpoint */ +static int fsl_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct fsl_ep *ep = container_of(_ep, struct fsl_ep, ep); + struct fsl_req *req = NULL; + struct fsl_req *iter; + unsigned long flags; + int ep_num, stopped, ret = 0; + u32 epctrl; + + if (!_ep || !_req) + return -EINVAL; + + spin_lock_irqsave(&ep->udc->lock, flags); + stopped = ep->stopped; + + /* Stop the ep before we deal with the queue */ + ep->stopped = 1; + ep_num = ep_index(ep); + epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); + if (ep_is_in(ep)) + epctrl &= ~EPCTRL_TX_ENABLE; + else + epctrl &= ~EPCTRL_RX_ENABLE; + fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry(iter, &ep->queue, queue) { + if (&iter->req != _req) + continue; + req = iter; + break; + } + if (!req) { + ret = -EINVAL; + goto out; + } + + /* The request is in progress, or completed but not dequeued */ + if (ep->queue.next == &req->queue) { + _req->status = -ECONNRESET; + fsl_ep_fifo_flush(_ep); /* flush current transfer */ + + /* The request isn't the last request in this ep queue */ + if (req->queue.next != &ep->queue) { + struct fsl_req *next_req; + + next_req = list_entry(req->queue.next, struct fsl_req, + queue); + + /* prime with dTD of next request */ + fsl_prime_ep(ep, next_req->head); + } + /* The request hasn't been processed, patch up the TD chain */ + } else { + struct fsl_req *prev_req; + + prev_req = list_entry(req->queue.prev, struct fsl_req, queue); + prev_req->tail->next_td_ptr = req->tail->next_td_ptr; + } + + done(ep, req, -ECONNRESET); + + /* Enable EP */ +out: epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); + if (ep_is_in(ep)) + epctrl |= EPCTRL_TX_ENABLE; + else + epctrl |= EPCTRL_RX_ENABLE; + fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]); + ep->stopped = stopped; + + spin_unlock_irqrestore(&ep->udc->lock, flags); + return ret; +} + +/*-------------------------------------------------------------------------*/ + +/*----------------------------------------------------------------- + * modify the endpoint halt feature + * @ep: the non-isochronous endpoint being stalled + * @value: 1--set halt 0--clear halt + * Returns zero, or a negative error code. +*----------------------------------------------------------------*/ +static int fsl_ep_set_halt(struct usb_ep *_ep, int value) +{ + struct fsl_ep *ep = NULL; + unsigned long flags; + int status = -EOPNOTSUPP; /* operation not supported */ + unsigned char ep_dir = 0, ep_num = 0; + struct fsl_udc *udc = NULL; + + ep = container_of(_ep, struct fsl_ep, ep); + udc = ep->udc; + if (!_ep || !ep->ep.desc) { + status = -EINVAL; + goto out; + } + + if (usb_endpoint_xfer_isoc(ep->ep.desc)) { + status = -EOPNOTSUPP; + goto out; + } + + /* Attempt to halt IN ep will fail if any transfer requests + * are still queue */ + if (value && ep_is_in(ep) && !list_empty(&ep->queue)) { + status = -EAGAIN; + goto out; + } + + status = 0; + ep_dir = ep_is_in(ep) ? USB_SEND : USB_RECV; + ep_num = (unsigned char)(ep_index(ep)); + spin_lock_irqsave(&ep->udc->lock, flags); + dr_ep_change_stall(ep_num, ep_dir, value); + spin_unlock_irqrestore(&ep->udc->lock, flags); + + if (ep_index(ep) == 0) { + udc->ep0_state = WAIT_FOR_SETUP; + udc->ep0_dir = 0; + } +out: + VDBG(" %s %s halt stat %d", ep->ep.name, + value ? "set" : "clear", status); + + return status; +} + +static int fsl_ep_fifo_status(struct usb_ep *_ep) +{ + struct fsl_ep *ep; + struct fsl_udc *udc; + int size = 0; + u32 bitmask; + struct ep_queue_head *qh; + + if (!_ep || !_ep->desc || !(_ep->desc->bEndpointAddress&0xF)) + return -ENODEV; + + ep = container_of(_ep, struct fsl_ep, ep); + + udc = (struct fsl_udc *)ep->udc; + + if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + qh = get_qh_by_ep(ep); + + bitmask = (ep_is_in(ep)) ? (1 << (ep_index(ep) + 16)) : + (1 << (ep_index(ep))); + + if (fsl_readl(&dr_regs->endptstatus) & bitmask) + size = (qh->size_ioc_int_sts & DTD_PACKET_SIZE) + >> DTD_LENGTH_BIT_POS; + + pr_debug("%s %u\n", __func__, size); + return size; +} + +static void fsl_ep_fifo_flush(struct usb_ep *_ep) +{ + struct fsl_ep *ep; + int ep_num, ep_dir; + u32 bits; + unsigned long timeout; +#define FSL_UDC_FLUSH_TIMEOUT 1000 + + if (!_ep) { + return; + } else { + ep = container_of(_ep, struct fsl_ep, ep); + if (!ep->ep.desc) + return; + } + ep_num = ep_index(ep); + ep_dir = ep_is_in(ep) ? USB_SEND : USB_RECV; + + if (ep_num == 0) + bits = (1 << 16) | 1; + else if (ep_dir == USB_SEND) + bits = 1 << (16 + ep_num); + else + bits = 1 << ep_num; + + timeout = jiffies + FSL_UDC_FLUSH_TIMEOUT; + do { + fsl_writel(bits, &dr_regs->endptflush); + + /* Wait until flush complete */ + while (fsl_readl(&dr_regs->endptflush)) { + if (time_after(jiffies, timeout)) { + ERR("ep flush timeout\n"); + return; + } + cpu_relax(); + } + /* See if we need to flush again */ + } while (fsl_readl(&dr_regs->endptstatus) & bits); +} + +static const struct usb_ep_ops fsl_ep_ops = { + .enable = fsl_ep_enable, + .disable = fsl_ep_disable, + + .alloc_request = fsl_alloc_request, + .free_request = fsl_free_request, + + .queue = fsl_ep_queue, + .dequeue = fsl_ep_dequeue, + + .set_halt = fsl_ep_set_halt, + .fifo_status = fsl_ep_fifo_status, + .fifo_flush = fsl_ep_fifo_flush, /* flush fifo */ +}; + +/*------------------------------------------------------------------------- + Gadget Driver Layer Operations +-------------------------------------------------------------------------*/ + +/*---------------------------------------------------------------------- + * Get the current frame number (from DR frame_index Reg ) + *----------------------------------------------------------------------*/ +static int fsl_get_frame(struct usb_gadget *gadget) +{ + return (int)(fsl_readl(&dr_regs->frindex) & USB_FRINDEX_MASKS); +} + +/*----------------------------------------------------------------------- + * Tries to wake up the host connected to this gadget + -----------------------------------------------------------------------*/ +static int fsl_wakeup(struct usb_gadget *gadget) +{ + struct fsl_udc *udc = container_of(gadget, struct fsl_udc, gadget); + u32 portsc; + + /* Remote wakeup feature not enabled by host */ + if (!udc->remote_wakeup) + return -ENOTSUPP; + + portsc = fsl_readl(&dr_regs->portsc1); + /* not suspended? */ + if (!(portsc & PORTSCX_PORT_SUSPEND)) + return 0; + /* trigger force resume */ + portsc |= PORTSCX_PORT_FORCE_RESUME; + fsl_writel(portsc, &dr_regs->portsc1); + return 0; +} + +static int can_pullup(struct fsl_udc *udc) +{ + return udc->driver && udc->softconnect && udc->vbus_active; +} + +/* Notify controller that VBUS is powered, Called by whatever + detects VBUS sessions */ +static int fsl_vbus_session(struct usb_gadget *gadget, int is_active) +{ + struct fsl_udc *udc; + unsigned long flags; + + udc = container_of(gadget, struct fsl_udc, gadget); + spin_lock_irqsave(&udc->lock, flags); + VDBG("VBUS %s", is_active ? "on" : "off"); + udc->vbus_active = (is_active != 0); + if (can_pullup(udc)) + fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP), + &dr_regs->usbcmd); + else + fsl_writel((fsl_readl(&dr_regs->usbcmd) & ~USB_CMD_RUN_STOP), + &dr_regs->usbcmd); + spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} + +/* constrain controller's VBUS power usage + * This call is used by gadget drivers during SET_CONFIGURATION calls, + * reporting how much power the device may consume. For example, this + * could affect how quickly batteries are recharged. + * + * Returns zero on success, else negative errno. + */ +static int fsl_vbus_draw(struct usb_gadget *gadget, unsigned mA) +{ + struct fsl_udc *udc; + + udc = container_of(gadget, struct fsl_udc, gadget); + if (!IS_ERR_OR_NULL(udc->transceiver)) + return usb_phy_set_power(udc->transceiver, mA); + return -ENOTSUPP; +} + +/* Change Data+ pullup status + * this func is used by usb_gadget_connect/disconnect + */ +static int fsl_pullup(struct usb_gadget *gadget, int is_on) +{ + struct fsl_udc *udc; + + udc = container_of(gadget, struct fsl_udc, gadget); + + if (!udc->vbus_active) + return -EOPNOTSUPP; + + udc->softconnect = (is_on != 0); + if (can_pullup(udc)) + fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP), + &dr_regs->usbcmd); + else + fsl_writel((fsl_readl(&dr_regs->usbcmd) & ~USB_CMD_RUN_STOP), + &dr_regs->usbcmd); + + return 0; +} + +static int fsl_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver); +static int fsl_udc_stop(struct usb_gadget *g); + +static const struct usb_gadget_ops fsl_gadget_ops = { + .get_frame = fsl_get_frame, + .wakeup = fsl_wakeup, +/* .set_selfpowered = fsl_set_selfpowered, */ /* Always selfpowered */ + .vbus_session = fsl_vbus_session, + .vbus_draw = fsl_vbus_draw, + .pullup = fsl_pullup, + .udc_start = fsl_udc_start, + .udc_stop = fsl_udc_stop, +}; + +/* + * Empty complete function used by this driver to fill in the req->complete + * field when creating a request since the complete field is mandatory. + */ +static void fsl_noop_complete(struct usb_ep *ep, struct usb_request *req) { } + +/* Set protocol stall on ep0, protocol stall will automatically be cleared + on new transaction */ +static void ep0stall(struct fsl_udc *udc) +{ + u32 tmp; + + /* must set tx and rx to stall at the same time */ + tmp = fsl_readl(&dr_regs->endptctrl[0]); + tmp |= EPCTRL_TX_EP_STALL | EPCTRL_RX_EP_STALL; + fsl_writel(tmp, &dr_regs->endptctrl[0]); + udc->ep0_state = WAIT_FOR_SETUP; + udc->ep0_dir = 0; +} + +/* Prime a status phase for ep0 */ +static int ep0_prime_status(struct fsl_udc *udc, int direction) +{ + struct fsl_req *req = udc->status_req; + struct fsl_ep *ep; + int ret; + + if (direction == EP_DIR_IN) + udc->ep0_dir = USB_DIR_IN; + else + udc->ep0_dir = USB_DIR_OUT; + + ep = &udc->eps[0]; + if (udc->ep0_state != DATA_STATE_XMIT) + udc->ep0_state = WAIT_FOR_OUT_STATUS; + + req->ep = ep; + req->req.length = 0; + req->req.status = -EINPROGRESS; + req->req.actual = 0; + req->req.complete = fsl_noop_complete; + req->dtd_count = 0; + + ret = usb_gadget_map_request(&ep->udc->gadget, &req->req, ep_is_in(ep)); + if (ret) + return ret; + + if (fsl_req_to_dtd(req, GFP_ATOMIC) == 0) + fsl_queue_td(ep, req); + else + return -ENOMEM; + + list_add_tail(&req->queue, &ep->queue); + + return 0; +} + +static void udc_reset_ep_queue(struct fsl_udc *udc, u8 pipe) +{ + struct fsl_ep *ep = get_ep_by_pipe(udc, pipe); + + if (ep->ep.name) + nuke(ep, -ESHUTDOWN); +} + +/* + * ch9 Set address + */ +static void ch9setaddress(struct fsl_udc *udc, u16 value, u16 index, u16 length) +{ + /* Save the new address to device struct */ + udc->device_address = (u8) value; + /* Update usb state */ + udc->usb_state = USB_STATE_ADDRESS; + /* Status phase */ + if (ep0_prime_status(udc, EP_DIR_IN)) + ep0stall(udc); +} + +/* + * ch9 Get status + */ +static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value, + u16 index, u16 length) +{ + u16 tmp = 0; /* Status, cpu endian */ + struct fsl_req *req; + struct fsl_ep *ep; + int ret; + + ep = &udc->eps[0]; + + if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) { + /* Get device status */ + tmp = udc->gadget.is_selfpowered; + tmp |= udc->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP; + } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) { + /* Get interface status */ + /* We don't have interface information in udc driver */ + tmp = 0; + } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) { + /* Get endpoint status */ + struct fsl_ep *target_ep; + + target_ep = get_ep_by_pipe(udc, get_pipe_by_windex(index)); + + /* stall if endpoint doesn't exist */ + if (!target_ep->ep.desc) + goto stall; + tmp = dr_ep_get_stall(ep_index(target_ep), ep_is_in(target_ep)) + << USB_ENDPOINT_HALT; + } + + udc->ep0_dir = USB_DIR_IN; + /* Borrow the per device status_req */ + req = udc->status_req; + /* Fill in the reqest structure */ + *((u16 *) req->req.buf) = cpu_to_le16(tmp); + + req->ep = ep; + req->req.length = 2; + req->req.status = -EINPROGRESS; + req->req.actual = 0; + req->req.complete = fsl_noop_complete; + req->dtd_count = 0; + + ret = usb_gadget_map_request(&ep->udc->gadget, &req->req, ep_is_in(ep)); + if (ret) + goto stall; + + /* prime the data phase */ + if ((fsl_req_to_dtd(req, GFP_ATOMIC) == 0)) + fsl_queue_td(ep, req); + else /* no mem */ + goto stall; + + list_add_tail(&req->queue, &ep->queue); + udc->ep0_state = DATA_STATE_XMIT; + if (ep0_prime_status(udc, EP_DIR_OUT)) + ep0stall(udc); + + return; +stall: + ep0stall(udc); +} + +static void setup_received_irq(struct fsl_udc *udc, + struct usb_ctrlrequest *setup) +__releases(udc->lock) +__acquires(udc->lock) +{ + u16 wValue = le16_to_cpu(setup->wValue); + u16 wIndex = le16_to_cpu(setup->wIndex); + u16 wLength = le16_to_cpu(setup->wLength); + + udc_reset_ep_queue(udc, 0); + + /* We process some stardard setup requests here */ + switch (setup->bRequest) { + case USB_REQ_GET_STATUS: + /* Data+Status phase from udc */ + if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK)) + != (USB_DIR_IN | USB_TYPE_STANDARD)) + break; + ch9getstatus(udc, setup->bRequestType, wValue, wIndex, wLength); + return; + + case USB_REQ_SET_ADDRESS: + /* Status phase from udc */ + if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD + | USB_RECIP_DEVICE)) + break; + ch9setaddress(udc, wValue, wIndex, wLength); + return; + + case USB_REQ_CLEAR_FEATURE: + case USB_REQ_SET_FEATURE: + /* Status phase from udc */ + { + int rc = -EOPNOTSUPP; + u16 ptc = 0; + + if ((setup->bRequestType & (USB_RECIP_MASK | USB_TYPE_MASK)) + == (USB_RECIP_ENDPOINT | USB_TYPE_STANDARD)) { + int pipe = get_pipe_by_windex(wIndex); + struct fsl_ep *ep; + + if (wValue != 0 || wLength != 0 || pipe >= udc->max_ep) + break; + ep = get_ep_by_pipe(udc, pipe); + + spin_unlock(&udc->lock); + rc = fsl_ep_set_halt(&ep->ep, + (setup->bRequest == USB_REQ_SET_FEATURE) + ? 1 : 0); + spin_lock(&udc->lock); + + } else if ((setup->bRequestType & (USB_RECIP_MASK + | USB_TYPE_MASK)) == (USB_RECIP_DEVICE + | USB_TYPE_STANDARD)) { + /* Note: The driver has not include OTG support yet. + * This will be set when OTG support is added */ + if (wValue == USB_DEVICE_TEST_MODE) + ptc = wIndex >> 8; + else if (gadget_is_otg(&udc->gadget)) { + if (setup->bRequest == + USB_DEVICE_B_HNP_ENABLE) + udc->gadget.b_hnp_enable = 1; + else if (setup->bRequest == + USB_DEVICE_A_HNP_SUPPORT) + udc->gadget.a_hnp_support = 1; + else if (setup->bRequest == + USB_DEVICE_A_ALT_HNP_SUPPORT) + udc->gadget.a_alt_hnp_support = 1; + } + rc = 0; + } else + break; + + if (rc == 0) { + if (ep0_prime_status(udc, EP_DIR_IN)) + ep0stall(udc); + } + if (ptc) { + u32 tmp; + + mdelay(10); + tmp = fsl_readl(&dr_regs->portsc1) | (ptc << 16); + fsl_writel(tmp, &dr_regs->portsc1); + printk(KERN_INFO "udc: switch to test mode %d.\n", ptc); + } + + return; + } + + default: + break; + } + + /* Requests handled by gadget */ + if (wLength) { + /* Data phase from gadget, status phase from udc */ + udc->ep0_dir = (setup->bRequestType & USB_DIR_IN) + ? USB_DIR_IN : USB_DIR_OUT; + spin_unlock(&udc->lock); + if (udc->driver->setup(&udc->gadget, + &udc->local_setup_buff) < 0) + ep0stall(udc); + spin_lock(&udc->lock); + udc->ep0_state = (setup->bRequestType & USB_DIR_IN) + ? DATA_STATE_XMIT : DATA_STATE_RECV; + /* + * If the data stage is IN, send status prime immediately. + * See 2.0 Spec chapter 8.5.3.3 for detail. + */ + if (udc->ep0_state == DATA_STATE_XMIT) + if (ep0_prime_status(udc, EP_DIR_OUT)) + ep0stall(udc); + + } else { + /* No data phase, IN status from gadget */ + udc->ep0_dir = USB_DIR_IN; + spin_unlock(&udc->lock); + if (udc->driver->setup(&udc->gadget, + &udc->local_setup_buff) < 0) + ep0stall(udc); + spin_lock(&udc->lock); + udc->ep0_state = WAIT_FOR_OUT_STATUS; + } +} + +/* Process request for Data or Status phase of ep0 + * prime status phase if needed */ +static void ep0_req_complete(struct fsl_udc *udc, struct fsl_ep *ep0, + struct fsl_req *req) +{ + if (udc->usb_state == USB_STATE_ADDRESS) { + /* Set the new address */ + u32 new_address = (u32) udc->device_address; + fsl_writel(new_address << USB_DEVICE_ADDRESS_BIT_POS, + &dr_regs->deviceaddr); + } + + done(ep0, req, 0); + + switch (udc->ep0_state) { + case DATA_STATE_XMIT: + /* already primed at setup_received_irq */ + udc->ep0_state = WAIT_FOR_OUT_STATUS; + break; + case DATA_STATE_RECV: + /* send status phase */ + if (ep0_prime_status(udc, EP_DIR_IN)) + ep0stall(udc); + break; + case WAIT_FOR_OUT_STATUS: + udc->ep0_state = WAIT_FOR_SETUP; + break; + case WAIT_FOR_SETUP: + ERR("Unexpected ep0 packets\n"); + break; + default: + ep0stall(udc); + break; + } +} + +/* Tripwire mechanism to ensure a setup packet payload is extracted without + * being corrupted by another incoming setup packet */ +static void tripwire_handler(struct fsl_udc *udc, u8 ep_num, u8 *buffer_ptr) +{ + u32 temp; + struct ep_queue_head *qh; + struct fsl_usb2_platform_data *pdata = udc->pdata; + + qh = &udc->ep_qh[ep_num * 2 + EP_DIR_OUT]; + + /* Clear bit in ENDPTSETUPSTAT */ + temp = fsl_readl(&dr_regs->endptsetupstat); + fsl_writel(temp | (1 << ep_num), &dr_regs->endptsetupstat); + + /* while a hazard exists when setup package arrives */ + do { + /* Set Setup Tripwire */ + temp = fsl_readl(&dr_regs->usbcmd); + fsl_writel(temp | USB_CMD_SUTW, &dr_regs->usbcmd); + + /* Copy the setup packet to local buffer */ + if (pdata->le_setup_buf) { + u32 *p = (u32 *)buffer_ptr; + u32 *s = (u32 *)qh->setup_buffer; + + /* Convert little endian setup buffer to CPU endian */ + *p++ = le32_to_cpu(*s++); + *p = le32_to_cpu(*s); + } else { + memcpy(buffer_ptr, (u8 *) qh->setup_buffer, 8); + } + } while (!(fsl_readl(&dr_regs->usbcmd) & USB_CMD_SUTW)); + + /* Clear Setup Tripwire */ + temp = fsl_readl(&dr_regs->usbcmd); + fsl_writel(temp & ~USB_CMD_SUTW, &dr_regs->usbcmd); +} + +/* process-ep_req(): free the completed Tds for this req */ +static int process_ep_req(struct fsl_udc *udc, int pipe, + struct fsl_req *curr_req) +{ + struct ep_td_struct *curr_td; + int actual, remaining_length, j, tmp; + int status = 0; + int errors = 0; + struct ep_queue_head *curr_qh = &udc->ep_qh[pipe]; + int direction = pipe % 2; + + curr_td = curr_req->head; + actual = curr_req->req.length; + + for (j = 0; j < curr_req->dtd_count; j++) { + remaining_length = (hc32_to_cpu(curr_td->size_ioc_sts) + & DTD_PACKET_SIZE) + >> DTD_LENGTH_BIT_POS; + actual -= remaining_length; + + errors = hc32_to_cpu(curr_td->size_ioc_sts); + if (errors & DTD_ERROR_MASK) { + if (errors & DTD_STATUS_HALTED) { + ERR("dTD error %08x QH=%d\n", errors, pipe); + /* Clear the errors and Halt condition */ + tmp = hc32_to_cpu(curr_qh->size_ioc_int_sts); + tmp &= ~errors; + curr_qh->size_ioc_int_sts = cpu_to_hc32(tmp); + status = -EPIPE; + /* FIXME: continue with next queued TD? */ + + break; + } + if (errors & DTD_STATUS_DATA_BUFF_ERR) { + VDBG("Transfer overflow"); + status = -EPROTO; + break; + } else if (errors & DTD_STATUS_TRANSACTION_ERR) { + VDBG("ISO error"); + status = -EILSEQ; + break; + } else + ERR("Unknown error has occurred (0x%x)!\n", + errors); + + } else if (hc32_to_cpu(curr_td->size_ioc_sts) + & DTD_STATUS_ACTIVE) { + VDBG("Request not complete"); + status = REQ_UNCOMPLETE; + return status; + } else if (remaining_length) { + if (direction) { + VDBG("Transmit dTD remaining length not zero"); + status = -EPROTO; + break; + } else { + break; + } + } else { + VDBG("dTD transmitted successful"); + } + + if (j != curr_req->dtd_count - 1) + curr_td = (struct ep_td_struct *)curr_td->next_td_virt; + } + + if (status) + return status; + + curr_req->req.actual = actual; + + return 0; +} + +/* Process a DTD completion interrupt */ +static void dtd_complete_irq(struct fsl_udc *udc) +{ + u32 bit_pos; + int i, ep_num, direction, bit_mask, status; + struct fsl_ep *curr_ep; + struct fsl_req *curr_req, *temp_req; + + /* Clear the bits in the register */ + bit_pos = fsl_readl(&dr_regs->endptcomplete); + fsl_writel(bit_pos, &dr_regs->endptcomplete); + + if (!bit_pos) + return; + + for (i = 0; i < udc->max_ep; i++) { + ep_num = i >> 1; + direction = i % 2; + + bit_mask = 1 << (ep_num + 16 * direction); + + if (!(bit_pos & bit_mask)) + continue; + + curr_ep = get_ep_by_pipe(udc, i); + + /* If the ep is configured */ + if (!curr_ep->ep.name) { + WARNING("Invalid EP?"); + continue; + } + + /* process the req queue until an uncomplete request */ + list_for_each_entry_safe(curr_req, temp_req, &curr_ep->queue, + queue) { + status = process_ep_req(udc, i, curr_req); + + VDBG("status of process_ep_req= %d, ep = %d", + status, ep_num); + if (status == REQ_UNCOMPLETE) + break; + /* write back status to req */ + curr_req->req.status = status; + + if (ep_num == 0) { + ep0_req_complete(udc, curr_ep, curr_req); + break; + } else + done(curr_ep, curr_req, status); + } + } +} + +static inline enum usb_device_speed portscx_device_speed(u32 reg) +{ + switch (reg & PORTSCX_PORT_SPEED_MASK) { + case PORTSCX_PORT_SPEED_HIGH: + return USB_SPEED_HIGH; + case PORTSCX_PORT_SPEED_FULL: + return USB_SPEED_FULL; + case PORTSCX_PORT_SPEED_LOW: + return USB_SPEED_LOW; + default: + return USB_SPEED_UNKNOWN; + } +} + +/* Process a port change interrupt */ +static void port_change_irq(struct fsl_udc *udc) +{ + if (udc->bus_reset) + udc->bus_reset = 0; + + /* Bus resetting is finished */ + if (!(fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET)) + /* Get the speed */ + udc->gadget.speed = + portscx_device_speed(fsl_readl(&dr_regs->portsc1)); + + /* Update USB state */ + if (!udc->resume_state) + udc->usb_state = USB_STATE_DEFAULT; +} + +/* Process suspend interrupt */ +static void suspend_irq(struct fsl_udc *udc) +{ + udc->resume_state = udc->usb_state; + udc->usb_state = USB_STATE_SUSPENDED; + + /* report suspend to the driver, serial.c does not support this */ + if (udc->driver->suspend) + udc->driver->suspend(&udc->gadget); +} + +static void bus_resume(struct fsl_udc *udc) +{ + udc->usb_state = udc->resume_state; + udc->resume_state = 0; + + /* report resume to the driver, serial.c does not support this */ + if (udc->driver->resume) + udc->driver->resume(&udc->gadget); +} + +/* Clear up all ep queues */ +static int reset_queues(struct fsl_udc *udc, bool bus_reset) +{ + u8 pipe; + + for (pipe = 0; pipe < udc->max_pipes; pipe++) + udc_reset_ep_queue(udc, pipe); + + /* report disconnect; the driver is already quiesced */ + spin_unlock(&udc->lock); + if (bus_reset) + usb_gadget_udc_reset(&udc->gadget, udc->driver); + else + udc->driver->disconnect(&udc->gadget); + spin_lock(&udc->lock); + + return 0; +} + +/* Process reset interrupt */ +static void reset_irq(struct fsl_udc *udc) +{ + u32 temp; + unsigned long timeout; + + /* Clear the device address */ + temp = fsl_readl(&dr_regs->deviceaddr); + fsl_writel(temp & ~USB_DEVICE_ADDRESS_MASK, &dr_regs->deviceaddr); + + udc->device_address = 0; + + /* Clear usb state */ + udc->resume_state = 0; + udc->ep0_dir = 0; + udc->ep0_state = WAIT_FOR_SETUP; + udc->remote_wakeup = 0; /* default to 0 on reset */ + udc->gadget.b_hnp_enable = 0; + udc->gadget.a_hnp_support = 0; + udc->gadget.a_alt_hnp_support = 0; + + /* Clear all the setup token semaphores */ + temp = fsl_readl(&dr_regs->endptsetupstat); + fsl_writel(temp, &dr_regs->endptsetupstat); + + /* Clear all the endpoint complete status bits */ + temp = fsl_readl(&dr_regs->endptcomplete); + fsl_writel(temp, &dr_regs->endptcomplete); + + timeout = jiffies + 100; + while (fsl_readl(&dr_regs->endpointprime)) { + /* Wait until all endptprime bits cleared */ + if (time_after(jiffies, timeout)) { + ERR("Timeout for reset\n"); + break; + } + cpu_relax(); + } + + /* Write 1s to the flush register */ + fsl_writel(0xffffffff, &dr_regs->endptflush); + + if (fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET) { + VDBG("Bus reset"); + /* Bus is reseting */ + udc->bus_reset = 1; + /* Reset all the queues, include XD, dTD, EP queue + * head and TR Queue */ + reset_queues(udc, true); + udc->usb_state = USB_STATE_DEFAULT; + } else { + VDBG("Controller reset"); + /* initialize usb hw reg except for regs for EP, not + * touch usbintr reg */ + dr_controller_setup(udc); + + /* Reset all internal used Queues */ + reset_queues(udc, false); + + ep0_setup(udc); + + /* Enable DR IRQ reg, Set Run bit, change udc state */ + dr_controller_run(udc); + udc->usb_state = USB_STATE_ATTACHED; + } +} + +/* + * USB device controller interrupt handler + */ +static irqreturn_t fsl_udc_irq(int irq, void *_udc) +{ + struct fsl_udc *udc = _udc; + u32 irq_src; + irqreturn_t status = IRQ_NONE; + unsigned long flags; + + /* Disable ISR for OTG host mode */ + if (udc->stopped) + return IRQ_NONE; + spin_lock_irqsave(&udc->lock, flags); + irq_src = fsl_readl(&dr_regs->usbsts) & fsl_readl(&dr_regs->usbintr); + /* Clear notification bits */ + fsl_writel(irq_src, &dr_regs->usbsts); + + /* VDBG("irq_src [0x%8x]", irq_src); */ + + /* Need to resume? */ + if (udc->usb_state == USB_STATE_SUSPENDED) + if ((fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_SUSPEND) == 0) + bus_resume(udc); + + /* USB Interrupt */ + if (irq_src & USB_STS_INT) { + VDBG("Packet int"); + /* Setup package, we only support ep0 as control ep */ + if (fsl_readl(&dr_regs->endptsetupstat) & EP_SETUP_STATUS_EP0) { + tripwire_handler(udc, 0, + (u8 *) (&udc->local_setup_buff)); + setup_received_irq(udc, &udc->local_setup_buff); + status = IRQ_HANDLED; + } + + /* completion of dtd */ + if (fsl_readl(&dr_regs->endptcomplete)) { + dtd_complete_irq(udc); + status = IRQ_HANDLED; + } + } + + /* SOF (for ISO transfer) */ + if (irq_src & USB_STS_SOF) { + status = IRQ_HANDLED; + } + + /* Port Change */ + if (irq_src & USB_STS_PORT_CHANGE) { + port_change_irq(udc); + status = IRQ_HANDLED; + } + + /* Reset Received */ + if (irq_src & USB_STS_RESET) { + VDBG("reset int"); + reset_irq(udc); + status = IRQ_HANDLED; + } + + /* Sleep Enable (Suspend) */ + if (irq_src & USB_STS_SUSPEND) { + suspend_irq(udc); + status = IRQ_HANDLED; + } + + if (irq_src & (USB_STS_ERR | USB_STS_SYS_ERR)) { + VDBG("Error IRQ %x", irq_src); + } + + spin_unlock_irqrestore(&udc->lock, flags); + return status; +} + +/*----------------------------------------------------------------* + * Hook to gadget drivers + * Called by initialization code of gadget drivers +*----------------------------------------------------------------*/ +static int fsl_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) +{ + int retval = 0; + unsigned long flags; + + /* lock is needed but whether should use this lock or another */ + spin_lock_irqsave(&udc_controller->lock, flags); + + /* hook up the driver */ + udc_controller->driver = driver; + spin_unlock_irqrestore(&udc_controller->lock, flags); + g->is_selfpowered = 1; + + if (!IS_ERR_OR_NULL(udc_controller->transceiver)) { + /* Suspend the controller until OTG enable it */ + udc_controller->stopped = 1; + printk(KERN_INFO "Suspend udc for OTG auto detect\n"); + + /* connect to bus through transceiver */ + if (!IS_ERR_OR_NULL(udc_controller->transceiver)) { + retval = otg_set_peripheral( + udc_controller->transceiver->otg, + &udc_controller->gadget); + if (retval < 0) { + ERR("can't bind to transceiver\n"); + udc_controller->driver = NULL; + return retval; + } + } + } else { + /* Enable DR IRQ reg and set USBCMD reg Run bit */ + dr_controller_run(udc_controller); + udc_controller->usb_state = USB_STATE_ATTACHED; + udc_controller->ep0_state = WAIT_FOR_SETUP; + udc_controller->ep0_dir = 0; + } + + return retval; +} + +/* Disconnect from gadget driver */ +static int fsl_udc_stop(struct usb_gadget *g) +{ + struct fsl_ep *loop_ep; + unsigned long flags; + + if (!IS_ERR_OR_NULL(udc_controller->transceiver)) + otg_set_peripheral(udc_controller->transceiver->otg, NULL); + + /* stop DR, disable intr */ + dr_controller_stop(udc_controller); + + /* in fact, no needed */ + udc_controller->usb_state = USB_STATE_ATTACHED; + udc_controller->ep0_state = WAIT_FOR_SETUP; + udc_controller->ep0_dir = 0; + + /* stand operation */ + spin_lock_irqsave(&udc_controller->lock, flags); + udc_controller->gadget.speed = USB_SPEED_UNKNOWN; + nuke(&udc_controller->eps[0], -ESHUTDOWN); + list_for_each_entry(loop_ep, &udc_controller->gadget.ep_list, + ep.ep_list) + nuke(loop_ep, -ESHUTDOWN); + spin_unlock_irqrestore(&udc_controller->lock, flags); + + udc_controller->driver = NULL; + + return 0; +} + +/*------------------------------------------------------------------------- + PROC File System Support +-------------------------------------------------------------------------*/ +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + +#include <linux/seq_file.h> + +static const char proc_filename[] = "driver/fsl_usb2_udc"; + +static int fsl_proc_read(struct seq_file *m, void *v) +{ + unsigned long flags; + int i; + u32 tmp_reg; + struct fsl_ep *ep = NULL; + struct fsl_req *req; + + struct fsl_udc *udc = udc_controller; + + spin_lock_irqsave(&udc->lock, flags); + + /* ------basic driver information ---- */ + seq_printf(m, + DRIVER_DESC "\n" + "%s version: %s\n" + "Gadget driver: %s\n\n", + driver_name, DRIVER_VERSION, + udc->driver ? udc->driver->driver.name : "(none)"); + + /* ------ DR Registers ----- */ + tmp_reg = fsl_readl(&dr_regs->usbcmd); + seq_printf(m, + "USBCMD reg:\n" + "SetupTW: %d\n" + "Run/Stop: %s\n\n", + (tmp_reg & USB_CMD_SUTW) ? 1 : 0, + (tmp_reg & USB_CMD_RUN_STOP) ? "Run" : "Stop"); + + tmp_reg = fsl_readl(&dr_regs->usbsts); + seq_printf(m, + "USB Status Reg:\n" + "Dr Suspend: %d Reset Received: %d System Error: %s " + "USB Error Interrupt: %s\n\n", + (tmp_reg & USB_STS_SUSPEND) ? 1 : 0, + (tmp_reg & USB_STS_RESET) ? 1 : 0, + (tmp_reg & USB_STS_SYS_ERR) ? "Err" : "Normal", + (tmp_reg & USB_STS_ERR) ? "Err detected" : "No err"); + + tmp_reg = fsl_readl(&dr_regs->usbintr); + seq_printf(m, + "USB Interrupt Enable Reg:\n" + "Sleep Enable: %d SOF Received Enable: %d " + "Reset Enable: %d\n" + "System Error Enable: %d " + "Port Change Detected Enable: %d\n" + "USB Error Intr Enable: %d USB Intr Enable: %d\n\n", + (tmp_reg & USB_INTR_DEVICE_SUSPEND) ? 1 : 0, + (tmp_reg & USB_INTR_SOF_EN) ? 1 : 0, + (tmp_reg & USB_INTR_RESET_EN) ? 1 : 0, + (tmp_reg & USB_INTR_SYS_ERR_EN) ? 1 : 0, + (tmp_reg & USB_INTR_PTC_DETECT_EN) ? 1 : 0, + (tmp_reg & USB_INTR_ERR_INT_EN) ? 1 : 0, + (tmp_reg & USB_INTR_INT_EN) ? 1 : 0); + + tmp_reg = fsl_readl(&dr_regs->frindex); + seq_printf(m, + "USB Frame Index Reg: Frame Number is 0x%x\n\n", + (tmp_reg & USB_FRINDEX_MASKS)); + + tmp_reg = fsl_readl(&dr_regs->deviceaddr); + seq_printf(m, + "USB Device Address Reg: Device Addr is 0x%x\n\n", + (tmp_reg & USB_DEVICE_ADDRESS_MASK)); + + tmp_reg = fsl_readl(&dr_regs->endpointlistaddr); + seq_printf(m, + "USB Endpoint List Address Reg: " + "Device Addr is 0x%x\n\n", + (tmp_reg & USB_EP_LIST_ADDRESS_MASK)); + + tmp_reg = fsl_readl(&dr_regs->portsc1); + seq_printf(m, + "USB Port Status&Control Reg:\n" + "Port Transceiver Type : %s Port Speed: %s\n" + "PHY Low Power Suspend: %s Port Reset: %s " + "Port Suspend Mode: %s\n" + "Over-current Change: %s " + "Port Enable/Disable Change: %s\n" + "Port Enabled/Disabled: %s " + "Current Connect Status: %s\n\n", ( { + const char *s; + switch (tmp_reg & PORTSCX_PTS_FSLS) { + case PORTSCX_PTS_UTMI: + s = "UTMI"; break; + case PORTSCX_PTS_ULPI: + s = "ULPI "; break; + case PORTSCX_PTS_FSLS: + s = "FS/LS Serial"; break; + default: + s = "None"; break; + } + s;} ), + usb_speed_string(portscx_device_speed(tmp_reg)), + (tmp_reg & PORTSCX_PHY_LOW_POWER_SPD) ? + "Normal PHY mode" : "Low power mode", + (tmp_reg & PORTSCX_PORT_RESET) ? "In Reset" : + "Not in Reset", + (tmp_reg & PORTSCX_PORT_SUSPEND) ? "In " : "Not in", + (tmp_reg & PORTSCX_OVER_CURRENT_CHG) ? "Dected" : + "No", + (tmp_reg & PORTSCX_PORT_EN_DIS_CHANGE) ? "Disable" : + "Not change", + (tmp_reg & PORTSCX_PORT_ENABLE) ? "Enable" : + "Not correct", + (tmp_reg & PORTSCX_CURRENT_CONNECT_STATUS) ? + "Attached" : "Not-Att"); + + tmp_reg = fsl_readl(&dr_regs->usbmode); + seq_printf(m, + "USB Mode Reg: Controller Mode is: %s\n\n", ( { + const char *s; + switch (tmp_reg & USB_MODE_CTRL_MODE_HOST) { + case USB_MODE_CTRL_MODE_IDLE: + s = "Idle"; break; + case USB_MODE_CTRL_MODE_DEVICE: + s = "Device Controller"; break; + case USB_MODE_CTRL_MODE_HOST: + s = "Host Controller"; break; + default: + s = "None"; break; + } + s; + } )); + + tmp_reg = fsl_readl(&dr_regs->endptsetupstat); + seq_printf(m, + "Endpoint Setup Status Reg: SETUP on ep 0x%x\n\n", + (tmp_reg & EP_SETUP_STATUS_MASK)); + + for (i = 0; i < udc->max_ep / 2; i++) { + tmp_reg = fsl_readl(&dr_regs->endptctrl[i]); + seq_printf(m, "EP Ctrl Reg [0x%x]: = [0x%x]\n", i, tmp_reg); + } + tmp_reg = fsl_readl(&dr_regs->endpointprime); + seq_printf(m, "EP Prime Reg = [0x%x]\n\n", tmp_reg); + + if (udc->pdata->have_sysif_regs) { + tmp_reg = usb_sys_regs->snoop1; + seq_printf(m, "Snoop1 Reg : = [0x%x]\n\n", tmp_reg); + + tmp_reg = usb_sys_regs->control; + seq_printf(m, "General Control Reg : = [0x%x]\n\n", tmp_reg); + } + + /* ------fsl_udc, fsl_ep, fsl_request structure information ----- */ + ep = &udc->eps[0]; + seq_printf(m, "For %s Maxpkt is 0x%x index is 0x%x\n", + ep->ep.name, ep_maxpacket(ep), ep_index(ep)); + + if (list_empty(&ep->queue)) { + seq_puts(m, "its req queue is empty\n\n"); + } else { + list_for_each_entry(req, &ep->queue, queue) { + seq_printf(m, + "req %p actual 0x%x length 0x%x buf %p\n", + &req->req, req->req.actual, + req->req.length, req->req.buf); + } + } + /* other gadget->eplist ep */ + list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) { + if (ep->ep.desc) { + seq_printf(m, + "\nFor %s Maxpkt is 0x%x " + "index is 0x%x\n", + ep->ep.name, ep_maxpacket(ep), + ep_index(ep)); + + if (list_empty(&ep->queue)) { + seq_puts(m, "its req queue is empty\n\n"); + } else { + list_for_each_entry(req, &ep->queue, queue) { + seq_printf(m, + "req %p actual 0x%x length " + "0x%x buf %p\n", + &req->req, req->req.actual, + req->req.length, req->req.buf); + } /* end for each_entry of ep req */ + } /* end for else */ + } /* end for if(ep->queue) */ + } /* end (ep->desc) */ + + spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} + +#define create_proc_file() \ + proc_create_single(proc_filename, 0, NULL, fsl_proc_read) +#define remove_proc_file() remove_proc_entry(proc_filename, NULL) + +#else /* !CONFIG_USB_GADGET_DEBUG_FILES */ + +#define create_proc_file() do {} while (0) +#define remove_proc_file() do {} while (0) + +#endif /* CONFIG_USB_GADGET_DEBUG_FILES */ + +/*-------------------------------------------------------------------------*/ + +/* Release udc structures */ +static void fsl_udc_release(struct device *dev) +{ + complete(udc_controller->done); + dma_free_coherent(dev->parent, udc_controller->ep_qh_size, + udc_controller->ep_qh, udc_controller->ep_qh_dma); + kfree(udc_controller); +} + +/****************************************************************** + Internal structure setup functions +*******************************************************************/ +/*------------------------------------------------------------------ + * init resource for global controller called by fsl_udc_probe() + * On success the udc handle is initialized, on failure it is + * unchanged (reset). + * Return 0 on success and -1 on allocation failure + ------------------------------------------------------------------*/ +static int struct_udc_setup(struct fsl_udc *udc, + struct platform_device *pdev) +{ + struct fsl_usb2_platform_data *pdata; + size_t size; + + pdata = dev_get_platdata(&pdev->dev); + udc->phy_mode = pdata->phy_mode; + + udc->eps = kcalloc(udc->max_ep, sizeof(struct fsl_ep), GFP_KERNEL); + if (!udc->eps) { + ERR("kmalloc udc endpoint status failed\n"); + goto eps_alloc_failed; + } + + /* initialized QHs, take care of alignment */ + size = udc->max_ep * sizeof(struct ep_queue_head); + if (size < QH_ALIGNMENT) + size = QH_ALIGNMENT; + else if ((size % QH_ALIGNMENT) != 0) { + size += QH_ALIGNMENT + 1; + size &= ~(QH_ALIGNMENT - 1); + } + udc->ep_qh = dma_alloc_coherent(&pdev->dev, size, + &udc->ep_qh_dma, GFP_KERNEL); + if (!udc->ep_qh) { + ERR("malloc QHs for udc failed\n"); + goto ep_queue_alloc_failed; + } + + udc->ep_qh_size = size; + + /* Initialize ep0 status request structure */ + /* FIXME: fsl_alloc_request() ignores ep argument */ + udc->status_req = container_of(fsl_alloc_request(NULL, GFP_KERNEL), + struct fsl_req, req); + if (!udc->status_req) { + ERR("kzalloc for udc status request failed\n"); + goto udc_status_alloc_failed; + } + + /* allocate a small amount of memory to get valid address */ + udc->status_req->req.buf = kmalloc(8, GFP_KERNEL); + if (!udc->status_req->req.buf) { + ERR("kzalloc for udc request buffer failed\n"); + goto udc_req_buf_alloc_failed; + } + + udc->resume_state = USB_STATE_NOTATTACHED; + udc->usb_state = USB_STATE_POWERED; + udc->ep0_dir = 0; + udc->remote_wakeup = 0; /* default to 0 on reset */ + + return 0; + +udc_req_buf_alloc_failed: + kfree(udc->status_req); +udc_status_alloc_failed: + kfree(udc->ep_qh); + udc->ep_qh_size = 0; +ep_queue_alloc_failed: + kfree(udc->eps); +eps_alloc_failed: + udc->phy_mode = 0; + return -1; + +} + +/*---------------------------------------------------------------- + * Setup the fsl_ep struct for eps + * Link fsl_ep->ep to gadget->ep_list + * ep0out is not used so do nothing here + * ep0in should be taken care + *--------------------------------------------------------------*/ +static int struct_ep_setup(struct fsl_udc *udc, unsigned char index, + char *name, int link) +{ + struct fsl_ep *ep = &udc->eps[index]; + + ep->udc = udc; + strcpy(ep->name, name); + ep->ep.name = ep->name; + + ep->ep.ops = &fsl_ep_ops; + ep->stopped = 0; + + if (index == 0) { + ep->ep.caps.type_control = true; + } else { + ep->ep.caps.type_iso = true; + ep->ep.caps.type_bulk = true; + ep->ep.caps.type_int = true; + } + + if (index & 1) + ep->ep.caps.dir_in = true; + else + ep->ep.caps.dir_out = true; + + /* for ep0: maxP defined in desc + * for other eps, maxP is set by epautoconfig() called by gadget layer + */ + usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0); + + /* the queue lists any req for this ep */ + INIT_LIST_HEAD(&ep->queue); + + /* gagdet.ep_list used for ep_autoconfig so no ep0 */ + if (link) + list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); + ep->gadget = &udc->gadget; + ep->qh = &udc->ep_qh[index]; + + return 0; +} + +/* Driver probe function + * all initialization operations implemented here except enabling usb_intr reg + * board setup should have been done in the platform code + */ +static int fsl_udc_probe(struct platform_device *pdev) +{ + struct fsl_usb2_platform_data *pdata; + struct resource *res; + int ret = -ENODEV; + unsigned int i; + u32 dccparams; + + udc_controller = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL); + if (udc_controller == NULL) + return -ENOMEM; + + pdata = dev_get_platdata(&pdev->dev); + udc_controller->pdata = pdata; + spin_lock_init(&udc_controller->lock); + udc_controller->stopped = 1; + +#ifdef CONFIG_USB_OTG + if (pdata->operating_mode == FSL_USB2_DR_OTG) { + udc_controller->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); + if (IS_ERR_OR_NULL(udc_controller->transceiver)) { + ERR("Can't find OTG driver!\n"); + ret = -ENODEV; + goto err_kfree; + } + } +#endif + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENXIO; + goto err_kfree; + } + + if (pdata->operating_mode == FSL_USB2_DR_DEVICE) { + if (!request_mem_region(res->start, resource_size(res), + driver_name)) { + ERR("request mem region for %s failed\n", pdev->name); + ret = -EBUSY; + goto err_kfree; + } + } + + dr_regs = ioremap(res->start, resource_size(res)); + if (!dr_regs) { + ret = -ENOMEM; + goto err_release_mem_region; + } + + pdata->regs = (void __iomem *)dr_regs; + + /* + * do platform specific init: check the clock, grab/config pins, etc. + */ + if (pdata->init && pdata->init(pdev)) { + ret = -ENODEV; + goto err_iounmap; + } + + /* Set accessors only after pdata->init() ! */ + fsl_set_accessors(pdata); + + if (pdata->have_sysif_regs) + usb_sys_regs = (void *)dr_regs + USB_DR_SYS_OFFSET; + + /* Read Device Controller Capability Parameters register */ + dccparams = fsl_readl(&dr_regs->dccparams); + if (!(dccparams & DCCPARAMS_DC)) { + ERR("This SOC doesn't support device role\n"); + ret = -ENODEV; + goto err_exit; + } + /* Get max device endpoints */ + /* DEN is bidirectional ep number, max_ep doubles the number */ + udc_controller->max_ep = (dccparams & DCCPARAMS_DEN_MASK) * 2; + + ret = platform_get_irq(pdev, 0); + if (ret <= 0) { + ret = ret ? : -ENODEV; + goto err_exit; + } + udc_controller->irq = ret; + + ret = request_irq(udc_controller->irq, fsl_udc_irq, IRQF_SHARED, + driver_name, udc_controller); + if (ret != 0) { + ERR("cannot request irq %d err %d\n", + udc_controller->irq, ret); + goto err_exit; + } + + /* Initialize the udc structure including QH member and other member */ + if (struct_udc_setup(udc_controller, pdev)) { + ERR("Can't initialize udc data structure\n"); + ret = -ENOMEM; + goto err_free_irq; + } + + if (IS_ERR_OR_NULL(udc_controller->transceiver)) { + /* initialize usb hw reg except for regs for EP, + * leave usbintr reg untouched */ + dr_controller_setup(udc_controller); + } + + /* Setup gadget structure */ + udc_controller->gadget.ops = &fsl_gadget_ops; + udc_controller->gadget.max_speed = USB_SPEED_HIGH; + udc_controller->gadget.ep0 = &udc_controller->eps[0].ep; + INIT_LIST_HEAD(&udc_controller->gadget.ep_list); + udc_controller->gadget.speed = USB_SPEED_UNKNOWN; + udc_controller->gadget.name = driver_name; + + /* Setup gadget.dev and register with kernel */ + dev_set_name(&udc_controller->gadget.dev, "gadget"); + udc_controller->gadget.dev.of_node = pdev->dev.of_node; + + if (!IS_ERR_OR_NULL(udc_controller->transceiver)) + udc_controller->gadget.is_otg = 1; + + /* setup QH and epctrl for ep0 */ + ep0_setup(udc_controller); + + /* setup udc->eps[] for ep0 */ + struct_ep_setup(udc_controller, 0, "ep0", 0); + /* for ep0: the desc defined here; + * for other eps, gadget layer called ep_enable with defined desc + */ + udc_controller->eps[0].ep.desc = &fsl_ep0_desc; + usb_ep_set_maxpacket_limit(&udc_controller->eps[0].ep, + USB_MAX_CTRL_PAYLOAD); + + /* setup the udc->eps[] for non-control endpoints and link + * to gadget.ep_list */ + for (i = 1; i < (int)(udc_controller->max_ep / 2); i++) { + char name[14]; + + sprintf(name, "ep%dout", i); + struct_ep_setup(udc_controller, i * 2, name, 1); + sprintf(name, "ep%din", i); + struct_ep_setup(udc_controller, i * 2 + 1, name, 1); + } + + /* use dma_pool for TD management */ + udc_controller->td_pool = dma_pool_create("udc_td", &pdev->dev, + sizeof(struct ep_td_struct), + DTD_ALIGNMENT, UDC_DMA_BOUNDARY); + if (udc_controller->td_pool == NULL) { + ret = -ENOMEM; + goto err_free_irq; + } + + ret = usb_add_gadget_udc_release(&pdev->dev, &udc_controller->gadget, + fsl_udc_release); + if (ret) + goto err_del_udc; + + create_proc_file(); + return 0; + +err_del_udc: + dma_pool_destroy(udc_controller->td_pool); +err_free_irq: + free_irq(udc_controller->irq, udc_controller); +err_exit: + if (pdata->exit) + pdata->exit(pdev); +err_iounmap: + iounmap(dr_regs); +err_release_mem_region: + if (pdata->operating_mode == FSL_USB2_DR_DEVICE) + release_mem_region(res->start, resource_size(res)); +err_kfree: + kfree(udc_controller); + udc_controller = NULL; + return ret; +} + +/* Driver removal function + * Free resources and finish pending transactions + */ +static int fsl_udc_remove(struct platform_device *pdev) +{ + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev); + + DECLARE_COMPLETION_ONSTACK(done); + + if (!udc_controller) + return -ENODEV; + + udc_controller->done = &done; + usb_del_gadget_udc(&udc_controller->gadget); + + /* DR has been stopped in usb_gadget_unregister_driver() */ + remove_proc_file(); + + /* Free allocated memory */ + kfree(udc_controller->status_req->req.buf); + kfree(udc_controller->status_req); + kfree(udc_controller->eps); + + dma_pool_destroy(udc_controller->td_pool); + free_irq(udc_controller->irq, udc_controller); + iounmap(dr_regs); + if (res && (pdata->operating_mode == FSL_USB2_DR_DEVICE)) + release_mem_region(res->start, resource_size(res)); + + /* free udc --wait for the release() finished */ + wait_for_completion(&done); + + /* + * do platform specific un-initialization: + * release iomux pins, etc. + */ + if (pdata->exit) + pdata->exit(pdev); + + return 0; +} + +/*----------------------------------------------------------------- + * Modify Power management attributes + * Used by OTG statemachine to disable gadget temporarily + -----------------------------------------------------------------*/ +static int fsl_udc_suspend(struct platform_device *pdev, pm_message_t state) +{ + dr_controller_stop(udc_controller); + return 0; +} + +/*----------------------------------------------------------------- + * Invoked on USB resume. May be called in_interrupt. + * Here we start the DR controller and enable the irq + *-----------------------------------------------------------------*/ +static int fsl_udc_resume(struct platform_device *pdev) +{ + /* Enable DR irq reg and set controller Run */ + if (udc_controller->stopped) { + dr_controller_setup(udc_controller); + dr_controller_run(udc_controller); + } + udc_controller->usb_state = USB_STATE_ATTACHED; + udc_controller->ep0_state = WAIT_FOR_SETUP; + udc_controller->ep0_dir = 0; + return 0; +} + +static int fsl_udc_otg_suspend(struct device *dev, pm_message_t state) +{ + struct fsl_udc *udc = udc_controller; + u32 mode, usbcmd; + + mode = fsl_readl(&dr_regs->usbmode) & USB_MODE_CTRL_MODE_MASK; + + pr_debug("%s(): mode 0x%x stopped %d\n", __func__, mode, udc->stopped); + + /* + * If the controller is already stopped, then this must be a + * PM suspend. Remember this fact, so that we will leave the + * controller stopped at PM resume time. + */ + if (udc->stopped) { + pr_debug("gadget already stopped, leaving early\n"); + udc->already_stopped = 1; + return 0; + } + + if (mode != USB_MODE_CTRL_MODE_DEVICE) { + pr_debug("gadget not in device mode, leaving early\n"); + return 0; + } + + /* stop the controller */ + usbcmd = fsl_readl(&dr_regs->usbcmd) & ~USB_CMD_RUN_STOP; + fsl_writel(usbcmd, &dr_regs->usbcmd); + + udc->stopped = 1; + + pr_info("USB Gadget suspended\n"); + + return 0; +} + +static int fsl_udc_otg_resume(struct device *dev) +{ + pr_debug("%s(): stopped %d already_stopped %d\n", __func__, + udc_controller->stopped, udc_controller->already_stopped); + + /* + * If the controller was stopped at suspend time, then + * don't resume it now. + */ + if (udc_controller->already_stopped) { + udc_controller->already_stopped = 0; + pr_debug("gadget was already stopped, leaving early\n"); + return 0; + } + + pr_info("USB Gadget resume\n"); + + return fsl_udc_resume(NULL); +} +/*------------------------------------------------------------------------- + Register entry point for the peripheral controller driver +--------------------------------------------------------------------------*/ +static const struct platform_device_id fsl_udc_devtype[] = { + { + .name = "fsl-usb2-udc", + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, fsl_udc_devtype); +static struct platform_driver udc_driver = { + .remove = fsl_udc_remove, + .id_table = fsl_udc_devtype, + /* these suspend and resume are not usb suspend and resume */ + .suspend = fsl_udc_suspend, + .resume = fsl_udc_resume, + .driver = { + .name = driver_name, + /* udc suspend/resume called from OTG driver */ + .suspend = fsl_udc_otg_suspend, + .resume = fsl_udc_otg_resume, + }, +}; + +module_platform_driver_probe(udc_driver, fsl_udc_probe); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:fsl-usb2-udc"); diff --git a/drivers/usb/gadget/udc/fsl_usb2_udc.h b/drivers/usb/gadget/udc/fsl_usb2_udc.h new file mode 100644 index 000000000..2efc5a930 --- /dev/null +++ b/drivers/usb/gadget/udc/fsl_usb2_udc.h @@ -0,0 +1,591 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2004,2012 Freescale Semiconductor, Inc + * All rights reserved. + * + * Freescale USB device/endpoint management registers + */ +#ifndef __FSL_USB2_UDC_H +#define __FSL_USB2_UDC_H + +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + +/* ### define USB registers here + */ +#define USB_MAX_CTRL_PAYLOAD 64 +#define USB_DR_SYS_OFFSET 0x400 + + /* USB DR device mode registers (Little Endian) */ +struct usb_dr_device { + /* Capability register */ + u8 res1[256]; + u16 caplength; /* Capability Register Length */ + u16 hciversion; /* Host Controller Interface Version */ + u32 hcsparams; /* Host Controller Structural Parameters */ + u32 hccparams; /* Host Controller Capability Parameters */ + u8 res2[20]; + u32 dciversion; /* Device Controller Interface Version */ + u32 dccparams; /* Device Controller Capability Parameters */ + u8 res3[24]; + /* Operation register */ + u32 usbcmd; /* USB Command Register */ + u32 usbsts; /* USB Status Register */ + u32 usbintr; /* USB Interrupt Enable Register */ + u32 frindex; /* Frame Index Register */ + u8 res4[4]; + u32 deviceaddr; /* Device Address */ + u32 endpointlistaddr; /* Endpoint List Address Register */ + u8 res5[4]; + u32 burstsize; /* Master Interface Data Burst Size Register */ + u32 txttfilltuning; /* Transmit FIFO Tuning Controls Register */ + u8 res6[24]; + u32 configflag; /* Configure Flag Register */ + u32 portsc1; /* Port 1 Status and Control Register */ + u8 res7[28]; + u32 otgsc; /* On-The-Go Status and Control */ + u32 usbmode; /* USB Mode Register */ + u32 endptsetupstat; /* Endpoint Setup Status Register */ + u32 endpointprime; /* Endpoint Initialization Register */ + u32 endptflush; /* Endpoint Flush Register */ + u32 endptstatus; /* Endpoint Status Register */ + u32 endptcomplete; /* Endpoint Complete Register */ + u32 endptctrl[6]; /* Endpoint Control Registers */ +}; + + /* USB DR host mode registers (Little Endian) */ +struct usb_dr_host { + /* Capability register */ + u8 res1[256]; + u16 caplength; /* Capability Register Length */ + u16 hciversion; /* Host Controller Interface Version */ + u32 hcsparams; /* Host Controller Structural Parameters */ + u32 hccparams; /* Host Controller Capability Parameters */ + u8 res2[20]; + u32 dciversion; /* Device Controller Interface Version */ + u32 dccparams; /* Device Controller Capability Parameters */ + u8 res3[24]; + /* Operation register */ + u32 usbcmd; /* USB Command Register */ + u32 usbsts; /* USB Status Register */ + u32 usbintr; /* USB Interrupt Enable Register */ + u32 frindex; /* Frame Index Register */ + u8 res4[4]; + u32 periodiclistbase; /* Periodic Frame List Base Address Register */ + u32 asynclistaddr; /* Current Asynchronous List Address Register */ + u8 res5[4]; + u32 burstsize; /* Master Interface Data Burst Size Register */ + u32 txttfilltuning; /* Transmit FIFO Tuning Controls Register */ + u8 res6[24]; + u32 configflag; /* Configure Flag Register */ + u32 portsc1; /* Port 1 Status and Control Register */ + u8 res7[28]; + u32 otgsc; /* On-The-Go Status and Control */ + u32 usbmode; /* USB Mode Register */ + u32 endptsetupstat; /* Endpoint Setup Status Register */ + u32 endpointprime; /* Endpoint Initialization Register */ + u32 endptflush; /* Endpoint Flush Register */ + u32 endptstatus; /* Endpoint Status Register */ + u32 endptcomplete; /* Endpoint Complete Register */ + u32 endptctrl[6]; /* Endpoint Control Registers */ +}; + + /* non-EHCI USB system interface registers (Big Endian) */ +struct usb_sys_interface { + u32 snoop1; + u32 snoop2; + u32 age_cnt_thresh; /* Age Count Threshold Register */ + u32 pri_ctrl; /* Priority Control Register */ + u32 si_ctrl; /* System Interface Control Register */ + u8 res[236]; + u32 control; /* General Purpose Control Register */ +}; + +/* ep0 transfer state */ +#define WAIT_FOR_SETUP 0 +#define DATA_STATE_XMIT 1 +#define DATA_STATE_NEED_ZLP 2 +#define WAIT_FOR_OUT_STATUS 3 +#define DATA_STATE_RECV 4 + +/* Device Controller Capability Parameter register */ +#define DCCPARAMS_DC 0x00000080 +#define DCCPARAMS_DEN_MASK 0x0000001f + +/* Frame Index Register Bit Masks */ +#define USB_FRINDEX_MASKS 0x3fff +/* USB CMD Register Bit Masks */ +#define USB_CMD_RUN_STOP 0x00000001 +#define USB_CMD_CTRL_RESET 0x00000002 +#define USB_CMD_PERIODIC_SCHEDULE_EN 0x00000010 +#define USB_CMD_ASYNC_SCHEDULE_EN 0x00000020 +#define USB_CMD_INT_AA_DOORBELL 0x00000040 +#define USB_CMD_ASP 0x00000300 +#define USB_CMD_ASYNC_SCH_PARK_EN 0x00000800 +#define USB_CMD_SUTW 0x00002000 +#define USB_CMD_ATDTW 0x00004000 +#define USB_CMD_ITC 0x00FF0000 + +/* bit 15,3,2 are frame list size */ +#define USB_CMD_FRAME_SIZE_1024 0x00000000 +#define USB_CMD_FRAME_SIZE_512 0x00000004 +#define USB_CMD_FRAME_SIZE_256 0x00000008 +#define USB_CMD_FRAME_SIZE_128 0x0000000C +#define USB_CMD_FRAME_SIZE_64 0x00008000 +#define USB_CMD_FRAME_SIZE_32 0x00008004 +#define USB_CMD_FRAME_SIZE_16 0x00008008 +#define USB_CMD_FRAME_SIZE_8 0x0000800C + +/* bit 9-8 are async schedule park mode count */ +#define USB_CMD_ASP_00 0x00000000 +#define USB_CMD_ASP_01 0x00000100 +#define USB_CMD_ASP_10 0x00000200 +#define USB_CMD_ASP_11 0x00000300 +#define USB_CMD_ASP_BIT_POS 8 + +/* bit 23-16 are interrupt threshold control */ +#define USB_CMD_ITC_NO_THRESHOLD 0x00000000 +#define USB_CMD_ITC_1_MICRO_FRM 0x00010000 +#define USB_CMD_ITC_2_MICRO_FRM 0x00020000 +#define USB_CMD_ITC_4_MICRO_FRM 0x00040000 +#define USB_CMD_ITC_8_MICRO_FRM 0x00080000 +#define USB_CMD_ITC_16_MICRO_FRM 0x00100000 +#define USB_CMD_ITC_32_MICRO_FRM 0x00200000 +#define USB_CMD_ITC_64_MICRO_FRM 0x00400000 +#define USB_CMD_ITC_BIT_POS 16 + +/* USB STS Register Bit Masks */ +#define USB_STS_INT 0x00000001 +#define USB_STS_ERR 0x00000002 +#define USB_STS_PORT_CHANGE 0x00000004 +#define USB_STS_FRM_LST_ROLL 0x00000008 +#define USB_STS_SYS_ERR 0x00000010 +#define USB_STS_IAA 0x00000020 +#define USB_STS_RESET 0x00000040 +#define USB_STS_SOF 0x00000080 +#define USB_STS_SUSPEND 0x00000100 +#define USB_STS_HC_HALTED 0x00001000 +#define USB_STS_RCL 0x00002000 +#define USB_STS_PERIODIC_SCHEDULE 0x00004000 +#define USB_STS_ASYNC_SCHEDULE 0x00008000 + +/* USB INTR Register Bit Masks */ +#define USB_INTR_INT_EN 0x00000001 +#define USB_INTR_ERR_INT_EN 0x00000002 +#define USB_INTR_PTC_DETECT_EN 0x00000004 +#define USB_INTR_FRM_LST_ROLL_EN 0x00000008 +#define USB_INTR_SYS_ERR_EN 0x00000010 +#define USB_INTR_ASYN_ADV_EN 0x00000020 +#define USB_INTR_RESET_EN 0x00000040 +#define USB_INTR_SOF_EN 0x00000080 +#define USB_INTR_DEVICE_SUSPEND 0x00000100 + +/* Device Address bit masks */ +#define USB_DEVICE_ADDRESS_MASK 0xFE000000 +#define USB_DEVICE_ADDRESS_BIT_POS 25 + +/* endpoint list address bit masks */ +#define USB_EP_LIST_ADDRESS_MASK 0xfffff800 + +/* PORTSCX Register Bit Masks */ +#define PORTSCX_CURRENT_CONNECT_STATUS 0x00000001 +#define PORTSCX_CONNECT_STATUS_CHANGE 0x00000002 +#define PORTSCX_PORT_ENABLE 0x00000004 +#define PORTSCX_PORT_EN_DIS_CHANGE 0x00000008 +#define PORTSCX_OVER_CURRENT_ACT 0x00000010 +#define PORTSCX_OVER_CURRENT_CHG 0x00000020 +#define PORTSCX_PORT_FORCE_RESUME 0x00000040 +#define PORTSCX_PORT_SUSPEND 0x00000080 +#define PORTSCX_PORT_RESET 0x00000100 +#define PORTSCX_LINE_STATUS_BITS 0x00000C00 +#define PORTSCX_PORT_POWER 0x00001000 +#define PORTSCX_PORT_INDICTOR_CTRL 0x0000C000 +#define PORTSCX_PORT_TEST_CTRL 0x000F0000 +#define PORTSCX_WAKE_ON_CONNECT_EN 0x00100000 +#define PORTSCX_WAKE_ON_CONNECT_DIS 0x00200000 +#define PORTSCX_WAKE_ON_OVER_CURRENT 0x00400000 +#define PORTSCX_PHY_LOW_POWER_SPD 0x00800000 +#define PORTSCX_PORT_FORCE_FULL_SPEED 0x01000000 +#define PORTSCX_PORT_SPEED_MASK 0x0C000000 +#define PORTSCX_PORT_WIDTH 0x10000000 +#define PORTSCX_PHY_TYPE_SEL 0xC0000000 + +/* bit 11-10 are line status */ +#define PORTSCX_LINE_STATUS_SE0 0x00000000 +#define PORTSCX_LINE_STATUS_JSTATE 0x00000400 +#define PORTSCX_LINE_STATUS_KSTATE 0x00000800 +#define PORTSCX_LINE_STATUS_UNDEF 0x00000C00 +#define PORTSCX_LINE_STATUS_BIT_POS 10 + +/* bit 15-14 are port indicator control */ +#define PORTSCX_PIC_OFF 0x00000000 +#define PORTSCX_PIC_AMBER 0x00004000 +#define PORTSCX_PIC_GREEN 0x00008000 +#define PORTSCX_PIC_UNDEF 0x0000C000 +#define PORTSCX_PIC_BIT_POS 14 + +/* bit 19-16 are port test control */ +#define PORTSCX_PTC_DISABLE 0x00000000 +#define PORTSCX_PTC_JSTATE 0x00010000 +#define PORTSCX_PTC_KSTATE 0x00020000 +#define PORTSCX_PTC_SEQNAK 0x00030000 +#define PORTSCX_PTC_PACKET 0x00040000 +#define PORTSCX_PTC_FORCE_EN 0x00050000 +#define PORTSCX_PTC_BIT_POS 16 + +/* bit 27-26 are port speed */ +#define PORTSCX_PORT_SPEED_FULL 0x00000000 +#define PORTSCX_PORT_SPEED_LOW 0x04000000 +#define PORTSCX_PORT_SPEED_HIGH 0x08000000 +#define PORTSCX_PORT_SPEED_UNDEF 0x0C000000 +#define PORTSCX_SPEED_BIT_POS 26 + +/* bit 28 is parallel transceiver width for UTMI interface */ +#define PORTSCX_PTW 0x10000000 +#define PORTSCX_PTW_8BIT 0x00000000 +#define PORTSCX_PTW_16BIT 0x10000000 + +/* bit 31-30 are port transceiver select */ +#define PORTSCX_PTS_UTMI 0x00000000 +#define PORTSCX_PTS_ULPI 0x80000000 +#define PORTSCX_PTS_FSLS 0xC0000000 +#define PORTSCX_PTS_BIT_POS 30 + +/* otgsc Register Bit Masks */ +#define OTGSC_CTRL_VUSB_DISCHARGE 0x00000001 +#define OTGSC_CTRL_VUSB_CHARGE 0x00000002 +#define OTGSC_CTRL_OTG_TERM 0x00000008 +#define OTGSC_CTRL_DATA_PULSING 0x00000010 +#define OTGSC_STS_USB_ID 0x00000100 +#define OTGSC_STS_A_VBUS_VALID 0x00000200 +#define OTGSC_STS_A_SESSION_VALID 0x00000400 +#define OTGSC_STS_B_SESSION_VALID 0x00000800 +#define OTGSC_STS_B_SESSION_END 0x00001000 +#define OTGSC_STS_1MS_TOGGLE 0x00002000 +#define OTGSC_STS_DATA_PULSING 0x00004000 +#define OTGSC_INTSTS_USB_ID 0x00010000 +#define OTGSC_INTSTS_A_VBUS_VALID 0x00020000 +#define OTGSC_INTSTS_A_SESSION_VALID 0x00040000 +#define OTGSC_INTSTS_B_SESSION_VALID 0x00080000 +#define OTGSC_INTSTS_B_SESSION_END 0x00100000 +#define OTGSC_INTSTS_1MS 0x00200000 +#define OTGSC_INTSTS_DATA_PULSING 0x00400000 +#define OTGSC_INTR_USB_ID 0x01000000 +#define OTGSC_INTR_A_VBUS_VALID 0x02000000 +#define OTGSC_INTR_A_SESSION_VALID 0x04000000 +#define OTGSC_INTR_B_SESSION_VALID 0x08000000 +#define OTGSC_INTR_B_SESSION_END 0x10000000 +#define OTGSC_INTR_1MS_TIMER 0x20000000 +#define OTGSC_INTR_DATA_PULSING 0x40000000 + +/* USB MODE Register Bit Masks */ +#define USB_MODE_CTRL_MODE_IDLE 0x00000000 +#define USB_MODE_CTRL_MODE_DEVICE 0x00000002 +#define USB_MODE_CTRL_MODE_HOST 0x00000003 +#define USB_MODE_CTRL_MODE_MASK 0x00000003 +#define USB_MODE_CTRL_MODE_RSV 0x00000001 +#define USB_MODE_ES 0x00000004 /* Endian Select */ +#define USB_MODE_SETUP_LOCK_OFF 0x00000008 +#define USB_MODE_STREAM_DISABLE 0x00000010 +/* Endpoint Flush Register */ +#define EPFLUSH_TX_OFFSET 0x00010000 +#define EPFLUSH_RX_OFFSET 0x00000000 + +/* Endpoint Setup Status bit masks */ +#define EP_SETUP_STATUS_MASK 0x0000003F +#define EP_SETUP_STATUS_EP0 0x00000001 + +/* ENDPOINTCTRLx Register Bit Masks */ +#define EPCTRL_TX_ENABLE 0x00800000 +#define EPCTRL_TX_DATA_TOGGLE_RST 0x00400000 /* Not EP0 */ +#define EPCTRL_TX_DATA_TOGGLE_INH 0x00200000 /* Not EP0 */ +#define EPCTRL_TX_TYPE 0x000C0000 +#define EPCTRL_TX_DATA_SOURCE 0x00020000 /* Not EP0 */ +#define EPCTRL_TX_EP_STALL 0x00010000 +#define EPCTRL_RX_ENABLE 0x00000080 +#define EPCTRL_RX_DATA_TOGGLE_RST 0x00000040 /* Not EP0 */ +#define EPCTRL_RX_DATA_TOGGLE_INH 0x00000020 /* Not EP0 */ +#define EPCTRL_RX_TYPE 0x0000000C +#define EPCTRL_RX_DATA_SINK 0x00000002 /* Not EP0 */ +#define EPCTRL_RX_EP_STALL 0x00000001 + +/* bit 19-18 and 3-2 are endpoint type */ +#define EPCTRL_EP_TYPE_CONTROL 0 +#define EPCTRL_EP_TYPE_ISO 1 +#define EPCTRL_EP_TYPE_BULK 2 +#define EPCTRL_EP_TYPE_INTERRUPT 3 +#define EPCTRL_TX_EP_TYPE_SHIFT 18 +#define EPCTRL_RX_EP_TYPE_SHIFT 2 + +/* SNOOPn Register Bit Masks */ +#define SNOOP_ADDRESS_MASK 0xFFFFF000 +#define SNOOP_SIZE_ZERO 0x00 /* snooping disable */ +#define SNOOP_SIZE_4KB 0x0B /* 4KB snoop size */ +#define SNOOP_SIZE_8KB 0x0C +#define SNOOP_SIZE_16KB 0x0D +#define SNOOP_SIZE_32KB 0x0E +#define SNOOP_SIZE_64KB 0x0F +#define SNOOP_SIZE_128KB 0x10 +#define SNOOP_SIZE_256KB 0x11 +#define SNOOP_SIZE_512KB 0x12 +#define SNOOP_SIZE_1MB 0x13 +#define SNOOP_SIZE_2MB 0x14 +#define SNOOP_SIZE_4MB 0x15 +#define SNOOP_SIZE_8MB 0x16 +#define SNOOP_SIZE_16MB 0x17 +#define SNOOP_SIZE_32MB 0x18 +#define SNOOP_SIZE_64MB 0x19 +#define SNOOP_SIZE_128MB 0x1A +#define SNOOP_SIZE_256MB 0x1B +#define SNOOP_SIZE_512MB 0x1C +#define SNOOP_SIZE_1GB 0x1D +#define SNOOP_SIZE_2GB 0x1E /* 2GB snoop size */ + +/* pri_ctrl Register Bit Masks */ +#define PRI_CTRL_PRI_LVL1 0x0000000C +#define PRI_CTRL_PRI_LVL0 0x00000003 + +/* si_ctrl Register Bit Masks */ +#define SI_CTRL_ERR_DISABLE 0x00000010 +#define SI_CTRL_IDRC_DISABLE 0x00000008 +#define SI_CTRL_RD_SAFE_EN 0x00000004 +#define SI_CTRL_RD_PREFETCH_DISABLE 0x00000002 +#define SI_CTRL_RD_PREFEFETCH_VAL 0x00000001 + +/* control Register Bit Masks */ +#define USB_CTRL_IOENB 0x00000004 +#define USB_CTRL_ULPI_INT0EN 0x00000001 +#define USB_CTRL_UTMI_PHY_EN 0x00000200 +#define USB_CTRL_USB_EN 0x00000004 +#define USB_CTRL_ULPI_PHY_CLK_SEL 0x00000400 + +/* Endpoint Queue Head data struct + * Rem: all the variables of qh are LittleEndian Mode + * and NEXT_POINTER_MASK should operate on a LittleEndian, Phy Addr + */ +struct ep_queue_head { + u32 max_pkt_length; /* Mult(31-30) , Zlt(29) , Max Pkt len + and IOS(15) */ + u32 curr_dtd_ptr; /* Current dTD Pointer(31-5) */ + u32 next_dtd_ptr; /* Next dTD Pointer(31-5), T(0) */ + u32 size_ioc_int_sts; /* Total bytes (30-16), IOC (15), + MultO(11-10), STS (7-0) */ + u32 buff_ptr0; /* Buffer pointer Page 0 (31-12) */ + u32 buff_ptr1; /* Buffer pointer Page 1 (31-12) */ + u32 buff_ptr2; /* Buffer pointer Page 2 (31-12) */ + u32 buff_ptr3; /* Buffer pointer Page 3 (31-12) */ + u32 buff_ptr4; /* Buffer pointer Page 4 (31-12) */ + u32 res1; + u8 setup_buffer[8]; /* Setup data 8 bytes */ + u32 res2[4]; +}; + +/* Endpoint Queue Head Bit Masks */ +#define EP_QUEUE_HEAD_MULT_POS 30 +#define EP_QUEUE_HEAD_ZLT_SEL 0x20000000 +#define EP_QUEUE_HEAD_MAX_PKT_LEN_POS 16 +#define EP_QUEUE_HEAD_MAX_PKT_LEN(ep_info) (((ep_info)>>16)&0x07ff) +#define EP_QUEUE_HEAD_IOS 0x00008000 +#define EP_QUEUE_HEAD_NEXT_TERMINATE 0x00000001 +#define EP_QUEUE_HEAD_IOC 0x00008000 +#define EP_QUEUE_HEAD_MULTO 0x00000C00 +#define EP_QUEUE_HEAD_STATUS_HALT 0x00000040 +#define EP_QUEUE_HEAD_STATUS_ACTIVE 0x00000080 +#define EP_QUEUE_CURRENT_OFFSET_MASK 0x00000FFF +#define EP_QUEUE_HEAD_NEXT_POINTER_MASK 0xFFFFFFE0 +#define EP_QUEUE_FRINDEX_MASK 0x000007FF +#define EP_MAX_LENGTH_TRANSFER 0x4000 + +/* Endpoint Transfer Descriptor data struct */ +/* Rem: all the variables of td are LittleEndian Mode */ +struct ep_td_struct { + u32 next_td_ptr; /* Next TD pointer(31-5), T(0) set + indicate invalid */ + u32 size_ioc_sts; /* Total bytes (30-16), IOC (15), + MultO(11-10), STS (7-0) */ + u32 buff_ptr0; /* Buffer pointer Page 0 */ + u32 buff_ptr1; /* Buffer pointer Page 1 */ + u32 buff_ptr2; /* Buffer pointer Page 2 */ + u32 buff_ptr3; /* Buffer pointer Page 3 */ + u32 buff_ptr4; /* Buffer pointer Page 4 */ + u32 res; + /* 32 bytes */ + dma_addr_t td_dma; /* dma address for this td */ + /* virtual address of next td specified in next_td_ptr */ + struct ep_td_struct *next_td_virt; +}; + +/* Endpoint Transfer Descriptor bit Masks */ +#define DTD_NEXT_TERMINATE 0x00000001 +#define DTD_IOC 0x00008000 +#define DTD_STATUS_ACTIVE 0x00000080 +#define DTD_STATUS_HALTED 0x00000040 +#define DTD_STATUS_DATA_BUFF_ERR 0x00000020 +#define DTD_STATUS_TRANSACTION_ERR 0x00000008 +#define DTD_RESERVED_FIELDS 0x80007300 +#define DTD_ADDR_MASK 0xFFFFFFE0 +#define DTD_PACKET_SIZE 0x7FFF0000 +#define DTD_LENGTH_BIT_POS 16 +#define DTD_ERROR_MASK (DTD_STATUS_HALTED | \ + DTD_STATUS_DATA_BUFF_ERR | \ + DTD_STATUS_TRANSACTION_ERR) +/* Alignment requirements; must be a power of two */ +#define DTD_ALIGNMENT 0x20 +#define QH_ALIGNMENT 2048 + +/* Controller dma boundary */ +#define UDC_DMA_BOUNDARY 0x1000 + +/*-------------------------------------------------------------------------*/ + +/* ### driver private data + */ +struct fsl_req { + struct usb_request req; + struct list_head queue; + /* ep_queue() func will add + a request->queue into a udc_ep->queue 'd tail */ + struct fsl_ep *ep; + unsigned mapped:1; + + struct ep_td_struct *head, *tail; /* For dTD List + cpu endian Virtual addr */ + unsigned int dtd_count; +}; + +#define REQ_UNCOMPLETE 1 + +struct fsl_ep { + struct usb_ep ep; + struct list_head queue; + struct fsl_udc *udc; + struct ep_queue_head *qh; + struct usb_gadget *gadget; + + char name[14]; + unsigned stopped:1; +}; + +#define EP_DIR_IN 1 +#define EP_DIR_OUT 0 + +struct fsl_udc { + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + struct fsl_usb2_platform_data *pdata; + struct completion *done; /* to make sure release() is done */ + struct fsl_ep *eps; + unsigned int max_ep; + unsigned int irq; + + struct usb_ctrlrequest local_setup_buff; + spinlock_t lock; + struct usb_phy *transceiver; + unsigned softconnect:1; + unsigned vbus_active:1; + unsigned stopped:1; + unsigned remote_wakeup:1; + unsigned already_stopped:1; + unsigned big_endian_desc:1; + + struct ep_queue_head *ep_qh; /* Endpoints Queue-Head */ + struct fsl_req *status_req; /* ep0 status request */ + struct dma_pool *td_pool; /* dma pool for DTD */ + enum fsl_usb2_phy_modes phy_mode; + + size_t ep_qh_size; /* size after alignment adjustment*/ + dma_addr_t ep_qh_dma; /* dma address of QH */ + + u32 max_pipes; /* Device max pipes */ + u32 bus_reset; /* Device is bus resetting */ + u32 resume_state; /* USB state to resume */ + u32 usb_state; /* USB current state */ + u32 ep0_state; /* Endpoint zero state */ + u32 ep0_dir; /* Endpoint zero direction: can be + USB_DIR_IN or USB_DIR_OUT */ + u8 device_address; /* Device USB address */ +}; + +/*-------------------------------------------------------------------------*/ + +#ifdef DEBUG +#define DBG(fmt, args...) printk(KERN_DEBUG "[%s] " fmt "\n", \ + __func__, ## args) +#else +#define DBG(fmt, args...) do{}while(0) +#endif + +#if 0 +static void dump_msg(const char *label, const u8 * buf, unsigned int length) +{ + unsigned int start, num, i; + char line[52], *p; + + if (length >= 512) + return; + DBG("%s, length %u:\n", label, length); + start = 0; + while (length > 0) { + num = min(length, 16u); + p = line; + for (i = 0; i < num; ++i) { + if (i == 8) + *p++ = ' '; + sprintf(p, " %02x", buf[i]); + p += 3; + } + *p = 0; + printk(KERN_DEBUG "%6x: %s\n", start, line); + buf += num; + start += num; + length -= num; + } +} +#endif + +#ifdef VERBOSE +#define VDBG DBG +#else +#define VDBG(stuff...) do{}while(0) +#endif + +#define ERR(stuff...) pr_err("udc: " stuff) +#define WARNING(stuff...) pr_warn("udc: " stuff) +#define INFO(stuff...) pr_info("udc: " stuff) + +/*-------------------------------------------------------------------------*/ + +/* ### Add board specific defines here + */ + +/* + * ### pipe direction macro from device view + */ +#define USB_RECV 0 /* OUT EP */ +#define USB_SEND 1 /* IN EP */ + +/* + * ### internal used help routines. + */ +#define ep_index(EP) ((EP)->ep.desc->bEndpointAddress&0xF) +#define ep_maxpacket(EP) ((EP)->ep.maxpacket) +#define ep_is_in(EP) ( (ep_index(EP) == 0) ? (EP->udc->ep0_dir == \ + USB_DIR_IN) : ((EP)->ep.desc->bEndpointAddress \ + & USB_DIR_IN)==USB_DIR_IN) +#define get_ep_by_pipe(udc, pipe) ((pipe == 1)? &udc->eps[0]: \ + &udc->eps[pipe]) +#define get_pipe_by_windex(windex) ((windex & USB_ENDPOINT_NUMBER_MASK) \ + * 2 + ((windex & USB_DIR_IN) ? 1 : 0)) +#define get_pipe_by_ep(EP) (ep_index(EP) * 2 + ep_is_in(EP)) + +static inline struct ep_queue_head *get_qh_by_ep(struct fsl_ep *ep) +{ + /* we only have one ep0 structure but two queue heads */ + if (ep_index(ep) != 0) + return ep->qh; + else + return &ep->udc->ep_qh[(ep->udc->ep0_dir == + USB_DIR_IN) ? 1 : 0]; +} + +#endif diff --git a/drivers/usb/gadget/udc/fusb300_udc.c b/drivers/usb/gadget/udc/fusb300_udc.c new file mode 100644 index 000000000..08ba9c8c1 --- /dev/null +++ b/drivers/usb/gadget/udc/fusb300_udc.c @@ -0,0 +1,1517 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Fusb300 UDC (USB gadget) + * + * Copyright (C) 2010 Faraday Technology Corp. + * + * Author : Yuan-hsin Chen <yhchen@faraday-tech.com> + */ +#include <linux/dma-mapping.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + +#include "fusb300_udc.h" + +MODULE_DESCRIPTION("FUSB300 USB gadget driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Yuan-Hsin Chen, Feng-Hsin Chiang <john453@faraday-tech.com>"); +MODULE_ALIAS("platform:fusb300_udc"); + +#define DRIVER_VERSION "20 October 2010" + +static const char udc_name[] = "fusb300_udc"; +static const char * const fusb300_ep_name[] = { + "ep0", "ep1", "ep2", "ep3", "ep4", "ep5", "ep6", "ep7", "ep8", "ep9", + "ep10", "ep11", "ep12", "ep13", "ep14", "ep15" +}; + +static void done(struct fusb300_ep *ep, struct fusb300_request *req, + int status); + +static void fusb300_enable_bit(struct fusb300 *fusb300, u32 offset, + u32 value) +{ + u32 reg = ioread32(fusb300->reg + offset); + + reg |= value; + iowrite32(reg, fusb300->reg + offset); +} + +static void fusb300_disable_bit(struct fusb300 *fusb300, u32 offset, + u32 value) +{ + u32 reg = ioread32(fusb300->reg + offset); + + reg &= ~value; + iowrite32(reg, fusb300->reg + offset); +} + + +static void fusb300_ep_setting(struct fusb300_ep *ep, + struct fusb300_ep_info info) +{ + ep->epnum = info.epnum; + ep->type = info.type; +} + +static int fusb300_ep_release(struct fusb300_ep *ep) +{ + if (!ep->epnum) + return 0; + ep->epnum = 0; + ep->stall = 0; + ep->wedged = 0; + return 0; +} + +static void fusb300_set_fifo_entry(struct fusb300 *fusb300, + u32 ep) +{ + u32 val = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); + + val &= ~FUSB300_EPSET1_FIFOENTRY_MSK; + val |= FUSB300_EPSET1_FIFOENTRY(FUSB300_FIFO_ENTRY_NUM); + iowrite32(val, fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); +} + +static void fusb300_set_start_entry(struct fusb300 *fusb300, + u8 ep) +{ + u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); + u32 start_entry = fusb300->fifo_entry_num * FUSB300_FIFO_ENTRY_NUM; + + reg &= ~FUSB300_EPSET1_START_ENTRY_MSK ; + reg |= FUSB300_EPSET1_START_ENTRY(start_entry); + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); + if (fusb300->fifo_entry_num == FUSB300_MAX_FIFO_ENTRY) { + fusb300->fifo_entry_num = 0; + fusb300->addrofs = 0; + pr_err("fifo entry is over the maximum number!\n"); + } else + fusb300->fifo_entry_num++; +} + +/* set fusb300_set_start_entry first before fusb300_set_epaddrofs */ +static void fusb300_set_epaddrofs(struct fusb300 *fusb300, + struct fusb300_ep_info info) +{ + u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum)); + + reg &= ~FUSB300_EPSET2_ADDROFS_MSK; + reg |= FUSB300_EPSET2_ADDROFS(fusb300->addrofs); + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum)); + fusb300->addrofs += (info.maxpacket + 7) / 8 * FUSB300_FIFO_ENTRY_NUM; +} + +static void ep_fifo_setting(struct fusb300 *fusb300, + struct fusb300_ep_info info) +{ + fusb300_set_fifo_entry(fusb300, info.epnum); + fusb300_set_start_entry(fusb300, info.epnum); + fusb300_set_epaddrofs(fusb300, info); +} + +static void fusb300_set_eptype(struct fusb300 *fusb300, + struct fusb300_ep_info info) +{ + u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); + + reg &= ~FUSB300_EPSET1_TYPE_MSK; + reg |= FUSB300_EPSET1_TYPE(info.type); + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); +} + +static void fusb300_set_epdir(struct fusb300 *fusb300, + struct fusb300_ep_info info) +{ + u32 reg; + + if (!info.dir_in) + return; + reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); + reg &= ~FUSB300_EPSET1_DIR_MSK; + reg |= FUSB300_EPSET1_DIRIN; + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); +} + +static void fusb300_set_ep_active(struct fusb300 *fusb300, + u8 ep) +{ + u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); + + reg |= FUSB300_EPSET1_ACTEN; + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); +} + +static void fusb300_set_epmps(struct fusb300 *fusb300, + struct fusb300_ep_info info) +{ + u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum)); + + reg &= ~FUSB300_EPSET2_MPS_MSK; + reg |= FUSB300_EPSET2_MPS(info.maxpacket); + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum)); +} + +static void fusb300_set_interval(struct fusb300 *fusb300, + struct fusb300_ep_info info) +{ + u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); + + reg &= ~FUSB300_EPSET1_INTERVAL(0x7); + reg |= FUSB300_EPSET1_INTERVAL(info.interval); + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); +} + +static void fusb300_set_bwnum(struct fusb300 *fusb300, + struct fusb300_ep_info info) +{ + u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); + + reg &= ~FUSB300_EPSET1_BWNUM(0x3); + reg |= FUSB300_EPSET1_BWNUM(info.bw_num); + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); +} + +static void set_ep_reg(struct fusb300 *fusb300, + struct fusb300_ep_info info) +{ + fusb300_set_eptype(fusb300, info); + fusb300_set_epdir(fusb300, info); + fusb300_set_epmps(fusb300, info); + + if (info.interval) + fusb300_set_interval(fusb300, info); + + if (info.bw_num) + fusb300_set_bwnum(fusb300, info); + + fusb300_set_ep_active(fusb300, info.epnum); +} + +static int config_ep(struct fusb300_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + struct fusb300 *fusb300 = ep->fusb300; + struct fusb300_ep_info info; + + ep->ep.desc = desc; + + info.interval = 0; + info.addrofs = 0; + info.bw_num = 0; + + info.type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + info.dir_in = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1 : 0; + info.maxpacket = usb_endpoint_maxp(desc); + info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; + + if ((info.type == USB_ENDPOINT_XFER_INT) || + (info.type == USB_ENDPOINT_XFER_ISOC)) { + info.interval = desc->bInterval; + if (info.type == USB_ENDPOINT_XFER_ISOC) + info.bw_num = usb_endpoint_maxp_mult(desc); + } + + ep_fifo_setting(fusb300, info); + + set_ep_reg(fusb300, info); + + fusb300_ep_setting(ep, info); + + fusb300->ep[info.epnum] = ep; + + return 0; +} + +static int fusb300_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct fusb300_ep *ep; + + ep = container_of(_ep, struct fusb300_ep, ep); + + if (ep->fusb300->reenum) { + ep->fusb300->fifo_entry_num = 0; + ep->fusb300->addrofs = 0; + ep->fusb300->reenum = 0; + } + + return config_ep(ep, desc); +} + +static int fusb300_disable(struct usb_ep *_ep) +{ + struct fusb300_ep *ep; + struct fusb300_request *req; + unsigned long flags; + + ep = container_of(_ep, struct fusb300_ep, ep); + + BUG_ON(!ep); + + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct fusb300_request, queue); + spin_lock_irqsave(&ep->fusb300->lock, flags); + done(ep, req, -ECONNRESET); + spin_unlock_irqrestore(&ep->fusb300->lock, flags); + } + + return fusb300_ep_release(ep); +} + +static struct usb_request *fusb300_alloc_request(struct usb_ep *_ep, + gfp_t gfp_flags) +{ + struct fusb300_request *req; + + req = kzalloc(sizeof(struct fusb300_request), gfp_flags); + if (!req) + return NULL; + INIT_LIST_HEAD(&req->queue); + + return &req->req; +} + +static void fusb300_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct fusb300_request *req; + + req = container_of(_req, struct fusb300_request, req); + kfree(req); +} + +static int enable_fifo_int(struct fusb300_ep *ep) +{ + struct fusb300 *fusb300 = ep->fusb300; + + if (ep->epnum) { + fusb300_enable_bit(fusb300, FUSB300_OFFSET_IGER0, + FUSB300_IGER0_EEPn_FIFO_INT(ep->epnum)); + } else { + pr_err("can't enable_fifo_int ep0\n"); + return -EINVAL; + } + + return 0; +} + +static int disable_fifo_int(struct fusb300_ep *ep) +{ + struct fusb300 *fusb300 = ep->fusb300; + + if (ep->epnum) { + fusb300_disable_bit(fusb300, FUSB300_OFFSET_IGER0, + FUSB300_IGER0_EEPn_FIFO_INT(ep->epnum)); + } else { + pr_err("can't disable_fifo_int ep0\n"); + return -EINVAL; + } + + return 0; +} + +static void fusb300_set_cxlen(struct fusb300 *fusb300, u32 length) +{ + u32 reg; + + reg = ioread32(fusb300->reg + FUSB300_OFFSET_CSR); + reg &= ~FUSB300_CSR_LEN_MSK; + reg |= FUSB300_CSR_LEN(length); + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_CSR); +} + +/* write data to cx fifo */ +static void fusb300_wrcxf(struct fusb300_ep *ep, + struct fusb300_request *req) +{ + int i = 0; + u8 *tmp; + u32 data; + struct fusb300 *fusb300 = ep->fusb300; + u32 length = req->req.length - req->req.actual; + + tmp = req->req.buf + req->req.actual; + + if (length > SS_CTL_MAX_PACKET_SIZE) { + fusb300_set_cxlen(fusb300, SS_CTL_MAX_PACKET_SIZE); + for (i = (SS_CTL_MAX_PACKET_SIZE >> 2); i > 0; i--) { + data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16 | + *(tmp + 3) << 24; + iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT); + tmp += 4; + } + req->req.actual += SS_CTL_MAX_PACKET_SIZE; + } else { /* length is less than max packet size */ + fusb300_set_cxlen(fusb300, length); + for (i = length >> 2; i > 0; i--) { + data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16 | + *(tmp + 3) << 24; + printk(KERN_DEBUG " 0x%x\n", data); + iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT); + tmp = tmp + 4; + } + switch (length % 4) { + case 1: + data = *tmp; + printk(KERN_DEBUG " 0x%x\n", data); + iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT); + break; + case 2: + data = *tmp | *(tmp + 1) << 8; + printk(KERN_DEBUG " 0x%x\n", data); + iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT); + break; + case 3: + data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16; + printk(KERN_DEBUG " 0x%x\n", data); + iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT); + break; + default: + break; + } + req->req.actual += length; + } +} + +static void fusb300_set_epnstall(struct fusb300 *fusb300, u8 ep) +{ + fusb300_enable_bit(fusb300, FUSB300_OFFSET_EPSET0(ep), + FUSB300_EPSET0_STL); +} + +static void fusb300_clear_epnstall(struct fusb300 *fusb300, u8 ep) +{ + u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET0(ep)); + + if (reg & FUSB300_EPSET0_STL) { + printk(KERN_DEBUG "EP%d stall... Clear!!\n", ep); + reg |= FUSB300_EPSET0_STL_CLR; + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET0(ep)); + } +} + +static void ep0_queue(struct fusb300_ep *ep, struct fusb300_request *req) +{ + if (ep->fusb300->ep0_dir) { /* if IN */ + if (req->req.length) { + fusb300_wrcxf(ep, req); + } else + printk(KERN_DEBUG "%s : req->req.length = 0x%x\n", + __func__, req->req.length); + if ((req->req.length == req->req.actual) || + (req->req.actual < ep->ep.maxpacket)) + done(ep, req, 0); + } else { /* OUT */ + if (!req->req.length) + done(ep, req, 0); + else + fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_IGER1, + FUSB300_IGER1_CX_OUT_INT); + } +} + +static int fusb300_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t gfp_flags) +{ + struct fusb300_ep *ep; + struct fusb300_request *req; + unsigned long flags; + int request = 0; + + ep = container_of(_ep, struct fusb300_ep, ep); + req = container_of(_req, struct fusb300_request, req); + + if (ep->fusb300->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + spin_lock_irqsave(&ep->fusb300->lock, flags); + + if (list_empty(&ep->queue)) + request = 1; + + list_add_tail(&req->queue, &ep->queue); + + req->req.actual = 0; + req->req.status = -EINPROGRESS; + + if (ep->ep.desc == NULL) /* ep0 */ + ep0_queue(ep, req); + else if (request && !ep->stall) + enable_fifo_int(ep); + + spin_unlock_irqrestore(&ep->fusb300->lock, flags); + + return 0; +} + +static int fusb300_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct fusb300_ep *ep; + struct fusb300_request *req; + unsigned long flags; + + ep = container_of(_ep, struct fusb300_ep, ep); + req = container_of(_req, struct fusb300_request, req); + + spin_lock_irqsave(&ep->fusb300->lock, flags); + if (!list_empty(&ep->queue)) + done(ep, req, -ECONNRESET); + spin_unlock_irqrestore(&ep->fusb300->lock, flags); + + return 0; +} + +static int fusb300_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedge) +{ + struct fusb300_ep *ep; + struct fusb300 *fusb300; + unsigned long flags; + int ret = 0; + + ep = container_of(_ep, struct fusb300_ep, ep); + + fusb300 = ep->fusb300; + + spin_lock_irqsave(&ep->fusb300->lock, flags); + + if (!list_empty(&ep->queue)) { + ret = -EAGAIN; + goto out; + } + + if (value) { + fusb300_set_epnstall(fusb300, ep->epnum); + ep->stall = 1; + if (wedge) + ep->wedged = 1; + } else { + fusb300_clear_epnstall(fusb300, ep->epnum); + ep->stall = 0; + ep->wedged = 0; + } + +out: + spin_unlock_irqrestore(&ep->fusb300->lock, flags); + return ret; +} + +static int fusb300_set_halt(struct usb_ep *_ep, int value) +{ + return fusb300_set_halt_and_wedge(_ep, value, 0); +} + +static int fusb300_set_wedge(struct usb_ep *_ep) +{ + return fusb300_set_halt_and_wedge(_ep, 1, 1); +} + +static void fusb300_fifo_flush(struct usb_ep *_ep) +{ +} + +static const struct usb_ep_ops fusb300_ep_ops = { + .enable = fusb300_enable, + .disable = fusb300_disable, + + .alloc_request = fusb300_alloc_request, + .free_request = fusb300_free_request, + + .queue = fusb300_queue, + .dequeue = fusb300_dequeue, + + .set_halt = fusb300_set_halt, + .fifo_flush = fusb300_fifo_flush, + .set_wedge = fusb300_set_wedge, +}; + +/*****************************************************************************/ +static void fusb300_clear_int(struct fusb300 *fusb300, u32 offset, + u32 value) +{ + iowrite32(value, fusb300->reg + offset); +} + +static void fusb300_reset(void) +{ +} + +static void fusb300_set_cxstall(struct fusb300 *fusb300) +{ + fusb300_enable_bit(fusb300, FUSB300_OFFSET_CSR, + FUSB300_CSR_STL); +} + +static void fusb300_set_cxdone(struct fusb300 *fusb300) +{ + fusb300_enable_bit(fusb300, FUSB300_OFFSET_CSR, + FUSB300_CSR_DONE); +} + +/* read data from cx fifo */ +static void fusb300_rdcxf(struct fusb300 *fusb300, + u8 *buffer, u32 length) +{ + int i = 0; + u8 *tmp; + u32 data; + + tmp = buffer; + + for (i = (length >> 2); i > 0; i--) { + data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT); + printk(KERN_DEBUG " 0x%x\n", data); + *tmp = data & 0xFF; + *(tmp + 1) = (data >> 8) & 0xFF; + *(tmp + 2) = (data >> 16) & 0xFF; + *(tmp + 3) = (data >> 24) & 0xFF; + tmp = tmp + 4; + } + + switch (length % 4) { + case 1: + data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT); + printk(KERN_DEBUG " 0x%x\n", data); + *tmp = data & 0xFF; + break; + case 2: + data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT); + printk(KERN_DEBUG " 0x%x\n", data); + *tmp = data & 0xFF; + *(tmp + 1) = (data >> 8) & 0xFF; + break; + case 3: + data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT); + printk(KERN_DEBUG " 0x%x\n", data); + *tmp = data & 0xFF; + *(tmp + 1) = (data >> 8) & 0xFF; + *(tmp + 2) = (data >> 16) & 0xFF; + break; + default: + break; + } +} + +static void fusb300_rdfifo(struct fusb300_ep *ep, + struct fusb300_request *req, + u32 length) +{ + int i = 0; + u8 *tmp; + u32 data, reg; + struct fusb300 *fusb300 = ep->fusb300; + + tmp = req->req.buf + req->req.actual; + req->req.actual += length; + + if (req->req.actual > req->req.length) + printk(KERN_DEBUG "req->req.actual > req->req.length\n"); + + for (i = (length >> 2); i > 0; i--) { + data = ioread32(fusb300->reg + + FUSB300_OFFSET_EPPORT(ep->epnum)); + *tmp = data & 0xFF; + *(tmp + 1) = (data >> 8) & 0xFF; + *(tmp + 2) = (data >> 16) & 0xFF; + *(tmp + 3) = (data >> 24) & 0xFF; + tmp = tmp + 4; + } + + switch (length % 4) { + case 1: + data = ioread32(fusb300->reg + + FUSB300_OFFSET_EPPORT(ep->epnum)); + *tmp = data & 0xFF; + break; + case 2: + data = ioread32(fusb300->reg + + FUSB300_OFFSET_EPPORT(ep->epnum)); + *tmp = data & 0xFF; + *(tmp + 1) = (data >> 8) & 0xFF; + break; + case 3: + data = ioread32(fusb300->reg + + FUSB300_OFFSET_EPPORT(ep->epnum)); + *tmp = data & 0xFF; + *(tmp + 1) = (data >> 8) & 0xFF; + *(tmp + 2) = (data >> 16) & 0xFF; + break; + default: + break; + } + + do { + reg = ioread32(fusb300->reg + FUSB300_OFFSET_IGR1); + reg &= FUSB300_IGR1_SYNF0_EMPTY_INT; + if (i) + printk(KERN_INFO "sync fifo is not empty!\n"); + i++; + } while (!reg); +} + +static u8 fusb300_get_epnstall(struct fusb300 *fusb300, u8 ep) +{ + u8 value; + u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET0(ep)); + + value = reg & FUSB300_EPSET0_STL; + + return value; +} + +static u8 fusb300_get_cxstall(struct fusb300 *fusb300) +{ + u8 value; + u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_CSR); + + value = (reg & FUSB300_CSR_STL) >> 1; + + return value; +} + +static void request_error(struct fusb300 *fusb300) +{ + fusb300_set_cxstall(fusb300); + printk(KERN_DEBUG "request error!!\n"); +} + +static void get_status(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl) +__releases(fusb300->lock) +__acquires(fusb300->lock) +{ + u8 ep; + u16 status = 0; + u16 w_index = ctrl->wIndex; + + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + status = 1 << USB_DEVICE_SELF_POWERED; + break; + case USB_RECIP_INTERFACE: + status = 0; + break; + case USB_RECIP_ENDPOINT: + ep = w_index & USB_ENDPOINT_NUMBER_MASK; + if (ep) { + if (fusb300_get_epnstall(fusb300, ep)) + status = 1 << USB_ENDPOINT_HALT; + } else { + if (fusb300_get_cxstall(fusb300)) + status = 0; + } + break; + + default: + request_error(fusb300); + return; /* exit */ + } + + fusb300->ep0_data = cpu_to_le16(status); + fusb300->ep0_req->buf = &fusb300->ep0_data; + fusb300->ep0_req->length = 2; + + spin_unlock(&fusb300->lock); + fusb300_queue(fusb300->gadget.ep0, fusb300->ep0_req, GFP_KERNEL); + spin_lock(&fusb300->lock); +} + +static void set_feature(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl) +{ + u8 ep; + + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + fusb300_set_cxdone(fusb300); + break; + case USB_RECIP_INTERFACE: + fusb300_set_cxdone(fusb300); + break; + case USB_RECIP_ENDPOINT: { + u16 w_index = le16_to_cpu(ctrl->wIndex); + + ep = w_index & USB_ENDPOINT_NUMBER_MASK; + if (ep) + fusb300_set_epnstall(fusb300, ep); + else + fusb300_set_cxstall(fusb300); + fusb300_set_cxdone(fusb300); + } + break; + default: + request_error(fusb300); + break; + } +} + +static void fusb300_clear_seqnum(struct fusb300 *fusb300, u8 ep) +{ + fusb300_enable_bit(fusb300, FUSB300_OFFSET_EPSET0(ep), + FUSB300_EPSET0_CLRSEQNUM); +} + +static void clear_feature(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl) +{ + struct fusb300_ep *ep = + fusb300->ep[ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK]; + + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + fusb300_set_cxdone(fusb300); + break; + case USB_RECIP_INTERFACE: + fusb300_set_cxdone(fusb300); + break; + case USB_RECIP_ENDPOINT: + if (ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK) { + if (ep->wedged) { + fusb300_set_cxdone(fusb300); + break; + } + if (ep->stall) { + ep->stall = 0; + fusb300_clear_seqnum(fusb300, ep->epnum); + fusb300_clear_epnstall(fusb300, ep->epnum); + if (!list_empty(&ep->queue)) + enable_fifo_int(ep); + } + } + fusb300_set_cxdone(fusb300); + break; + default: + request_error(fusb300); + break; + } +} + +static void fusb300_set_dev_addr(struct fusb300 *fusb300, u16 addr) +{ + u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_DAR); + + reg &= ~FUSB300_DAR_DRVADDR_MSK; + reg |= FUSB300_DAR_DRVADDR(addr); + + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_DAR); +} + +static void set_address(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl) +{ + if (ctrl->wValue >= 0x0100) + request_error(fusb300); + else { + fusb300_set_dev_addr(fusb300, ctrl->wValue); + fusb300_set_cxdone(fusb300); + } +} + +#define UVC_COPY_DESCRIPTORS(mem, src) \ + do { \ + const struct usb_descriptor_header * const *__src; \ + for (__src = src; *__src; ++__src) { \ + memcpy(mem, *__src, (*__src)->bLength); \ + mem += (*__src)->bLength; \ + } \ + } while (0) + +static int setup_packet(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl) +{ + u8 *p = (u8 *)ctrl; + u8 ret = 0; + u8 i = 0; + + fusb300_rdcxf(fusb300, p, 8); + fusb300->ep0_dir = ctrl->bRequestType & USB_DIR_IN; + fusb300->ep0_length = ctrl->wLength; + + /* check request */ + if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { + switch (ctrl->bRequest) { + case USB_REQ_GET_STATUS: + get_status(fusb300, ctrl); + break; + case USB_REQ_CLEAR_FEATURE: + clear_feature(fusb300, ctrl); + break; + case USB_REQ_SET_FEATURE: + set_feature(fusb300, ctrl); + break; + case USB_REQ_SET_ADDRESS: + set_address(fusb300, ctrl); + break; + case USB_REQ_SET_CONFIGURATION: + fusb300_enable_bit(fusb300, FUSB300_OFFSET_DAR, + FUSB300_DAR_SETCONFG); + /* clear sequence number */ + for (i = 1; i <= FUSB300_MAX_NUM_EP; i++) + fusb300_clear_seqnum(fusb300, i); + fusb300->reenum = 1; + ret = 1; + break; + default: + ret = 1; + break; + } + } else + ret = 1; + + return ret; +} + +static void done(struct fusb300_ep *ep, struct fusb300_request *req, + int status) +{ + list_del_init(&req->queue); + + /* don't modify queue heads during completion callback */ + if (ep->fusb300->gadget.speed == USB_SPEED_UNKNOWN) + req->req.status = -ESHUTDOWN; + else + req->req.status = status; + + spin_unlock(&ep->fusb300->lock); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&ep->fusb300->lock); + + if (ep->epnum) { + disable_fifo_int(ep); + if (!list_empty(&ep->queue)) + enable_fifo_int(ep); + } else + fusb300_set_cxdone(ep->fusb300); +} + +static void fusb300_fill_idma_prdtbl(struct fusb300_ep *ep, dma_addr_t d, + u32 len) +{ + u32 value; + u32 reg; + + /* wait SW owner */ + do { + reg = ioread32(ep->fusb300->reg + + FUSB300_OFFSET_EPPRD_W0(ep->epnum)); + reg &= FUSB300_EPPRD0_H; + } while (reg); + + iowrite32(d, ep->fusb300->reg + FUSB300_OFFSET_EPPRD_W1(ep->epnum)); + + value = FUSB300_EPPRD0_BTC(len) | FUSB300_EPPRD0_H | + FUSB300_EPPRD0_F | FUSB300_EPPRD0_L | FUSB300_EPPRD0_I; + iowrite32(value, ep->fusb300->reg + FUSB300_OFFSET_EPPRD_W0(ep->epnum)); + + iowrite32(0x0, ep->fusb300->reg + FUSB300_OFFSET_EPPRD_W2(ep->epnum)); + + fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_EPPRDRDY, + FUSB300_EPPRDR_EP_PRD_RDY(ep->epnum)); +} + +static void fusb300_wait_idma_finished(struct fusb300_ep *ep) +{ + u32 reg; + + do { + reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_IGR1); + if ((reg & FUSB300_IGR1_VBUS_CHG_INT) || + (reg & FUSB300_IGR1_WARM_RST_INT) || + (reg & FUSB300_IGR1_HOT_RST_INT) || + (reg & FUSB300_IGR1_USBRST_INT) + ) + goto IDMA_RESET; + reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_IGR0); + reg &= FUSB300_IGR0_EPn_PRD_INT(ep->epnum); + } while (!reg); + + fusb300_clear_int(ep->fusb300, FUSB300_OFFSET_IGR0, + FUSB300_IGR0_EPn_PRD_INT(ep->epnum)); + return; + +IDMA_RESET: + reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_IGER0); + reg &= ~FUSB300_IGER0_EEPn_PRD_INT(ep->epnum); + iowrite32(reg, ep->fusb300->reg + FUSB300_OFFSET_IGER0); +} + +static void fusb300_set_idma(struct fusb300_ep *ep, + struct fusb300_request *req) +{ + int ret; + + ret = usb_gadget_map_request(&ep->fusb300->gadget, + &req->req, DMA_TO_DEVICE); + if (ret) + return; + + fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_IGER0, + FUSB300_IGER0_EEPn_PRD_INT(ep->epnum)); + + fusb300_fill_idma_prdtbl(ep, req->req.dma, req->req.length); + /* check idma is done */ + fusb300_wait_idma_finished(ep); + + usb_gadget_unmap_request(&ep->fusb300->gadget, + &req->req, DMA_TO_DEVICE); +} + +static void in_ep_fifo_handler(struct fusb300_ep *ep) +{ + struct fusb300_request *req = list_entry(ep->queue.next, + struct fusb300_request, queue); + + if (req->req.length) + fusb300_set_idma(ep, req); + done(ep, req, 0); +} + +static void out_ep_fifo_handler(struct fusb300_ep *ep) +{ + struct fusb300 *fusb300 = ep->fusb300; + struct fusb300_request *req = list_entry(ep->queue.next, + struct fusb300_request, queue); + u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPFFR(ep->epnum)); + u32 length = reg & FUSB300_FFR_BYCNT; + + fusb300_rdfifo(ep, req, length); + + /* finish out transfer */ + if ((req->req.length == req->req.actual) || (length < ep->ep.maxpacket)) + done(ep, req, 0); +} + +static void check_device_mode(struct fusb300 *fusb300) +{ + u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_GCR); + + switch (reg & FUSB300_GCR_DEVEN_MSK) { + case FUSB300_GCR_DEVEN_SS: + fusb300->gadget.speed = USB_SPEED_SUPER; + break; + case FUSB300_GCR_DEVEN_HS: + fusb300->gadget.speed = USB_SPEED_HIGH; + break; + case FUSB300_GCR_DEVEN_FS: + fusb300->gadget.speed = USB_SPEED_FULL; + break; + default: + fusb300->gadget.speed = USB_SPEED_UNKNOWN; + break; + } + printk(KERN_INFO "dev_mode = %d\n", (reg & FUSB300_GCR_DEVEN_MSK)); +} + + +static void fusb300_ep0out(struct fusb300 *fusb300) +{ + struct fusb300_ep *ep = fusb300->ep[0]; + u32 reg; + + if (!list_empty(&ep->queue)) { + struct fusb300_request *req; + + req = list_first_entry(&ep->queue, + struct fusb300_request, queue); + if (req->req.length) + fusb300_rdcxf(ep->fusb300, req->req.buf, + req->req.length); + done(ep, req, 0); + reg = ioread32(fusb300->reg + FUSB300_OFFSET_IGER1); + reg &= ~FUSB300_IGER1_CX_OUT_INT; + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_IGER1); + } else + pr_err("%s : empty queue\n", __func__); +} + +static void fusb300_ep0in(struct fusb300 *fusb300) +{ + struct fusb300_request *req; + struct fusb300_ep *ep = fusb300->ep[0]; + + if ((!list_empty(&ep->queue)) && (fusb300->ep0_dir)) { + req = list_entry(ep->queue.next, + struct fusb300_request, queue); + if (req->req.length) + fusb300_wrcxf(ep, req); + if ((req->req.length - req->req.actual) < ep->ep.maxpacket) + done(ep, req, 0); + } else + fusb300_set_cxdone(fusb300); +} + +static void fusb300_grp2_handler(void) +{ +} + +static void fusb300_grp3_handler(void) +{ +} + +static void fusb300_grp4_handler(void) +{ +} + +static void fusb300_grp5_handler(void) +{ +} + +static irqreturn_t fusb300_irq(int irq, void *_fusb300) +{ + struct fusb300 *fusb300 = _fusb300; + u32 int_grp1 = ioread32(fusb300->reg + FUSB300_OFFSET_IGR1); + u32 int_grp1_en = ioread32(fusb300->reg + FUSB300_OFFSET_IGER1); + u32 int_grp0 = ioread32(fusb300->reg + FUSB300_OFFSET_IGR0); + u32 int_grp0_en = ioread32(fusb300->reg + FUSB300_OFFSET_IGER0); + struct usb_ctrlrequest ctrl; + u8 in; + u32 reg; + int i; + + spin_lock(&fusb300->lock); + + int_grp1 &= int_grp1_en; + int_grp0 &= int_grp0_en; + + if (int_grp1 & FUSB300_IGR1_WARM_RST_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_WARM_RST_INT); + printk(KERN_INFO"fusb300_warmreset\n"); + fusb300_reset(); + } + + if (int_grp1 & FUSB300_IGR1_HOT_RST_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_HOT_RST_INT); + printk(KERN_INFO"fusb300_hotreset\n"); + fusb300_reset(); + } + + if (int_grp1 & FUSB300_IGR1_USBRST_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_USBRST_INT); + fusb300_reset(); + } + /* COMABT_INT has a highest priority */ + + if (int_grp1 & FUSB300_IGR1_CX_COMABT_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_CX_COMABT_INT); + printk(KERN_INFO"fusb300_ep0abt\n"); + } + + if (int_grp1 & FUSB300_IGR1_VBUS_CHG_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_VBUS_CHG_INT); + printk(KERN_INFO"fusb300_vbus_change\n"); + } + + if (int_grp1 & FUSB300_IGR1_U3_EXIT_FAIL_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_U3_EXIT_FAIL_INT); + } + + if (int_grp1 & FUSB300_IGR1_U2_EXIT_FAIL_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_U2_EXIT_FAIL_INT); + } + + if (int_grp1 & FUSB300_IGR1_U1_EXIT_FAIL_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_U1_EXIT_FAIL_INT); + } + + if (int_grp1 & FUSB300_IGR1_U2_ENTRY_FAIL_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_U2_ENTRY_FAIL_INT); + } + + if (int_grp1 & FUSB300_IGR1_U1_ENTRY_FAIL_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_U1_ENTRY_FAIL_INT); + } + + if (int_grp1 & FUSB300_IGR1_U3_EXIT_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_U3_EXIT_INT); + printk(KERN_INFO "FUSB300_IGR1_U3_EXIT_INT\n"); + } + + if (int_grp1 & FUSB300_IGR1_U2_EXIT_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_U2_EXIT_INT); + printk(KERN_INFO "FUSB300_IGR1_U2_EXIT_INT\n"); + } + + if (int_grp1 & FUSB300_IGR1_U1_EXIT_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_U1_EXIT_INT); + printk(KERN_INFO "FUSB300_IGR1_U1_EXIT_INT\n"); + } + + if (int_grp1 & FUSB300_IGR1_U3_ENTRY_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_U3_ENTRY_INT); + printk(KERN_INFO "FUSB300_IGR1_U3_ENTRY_INT\n"); + fusb300_enable_bit(fusb300, FUSB300_OFFSET_SSCR1, + FUSB300_SSCR1_GO_U3_DONE); + } + + if (int_grp1 & FUSB300_IGR1_U2_ENTRY_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_U2_ENTRY_INT); + printk(KERN_INFO "FUSB300_IGR1_U2_ENTRY_INT\n"); + } + + if (int_grp1 & FUSB300_IGR1_U1_ENTRY_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_U1_ENTRY_INT); + printk(KERN_INFO "FUSB300_IGR1_U1_ENTRY_INT\n"); + } + + if (int_grp1 & FUSB300_IGR1_RESM_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_RESM_INT); + printk(KERN_INFO "fusb300_resume\n"); + } + + if (int_grp1 & FUSB300_IGR1_SUSP_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_SUSP_INT); + printk(KERN_INFO "fusb300_suspend\n"); + } + + if (int_grp1 & FUSB300_IGR1_HS_LPM_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_HS_LPM_INT); + printk(KERN_INFO "fusb300_HS_LPM_INT\n"); + } + + if (int_grp1 & FUSB300_IGR1_DEV_MODE_CHG_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_DEV_MODE_CHG_INT); + check_device_mode(fusb300); + } + + if (int_grp1 & FUSB300_IGR1_CX_COMFAIL_INT) { + fusb300_set_cxstall(fusb300); + printk(KERN_INFO "fusb300_ep0fail\n"); + } + + if (int_grp1 & FUSB300_IGR1_CX_SETUP_INT) { + printk(KERN_INFO "fusb300_ep0setup\n"); + if (setup_packet(fusb300, &ctrl)) { + spin_unlock(&fusb300->lock); + if (fusb300->driver->setup(&fusb300->gadget, &ctrl) < 0) + fusb300_set_cxstall(fusb300); + spin_lock(&fusb300->lock); + } + } + + if (int_grp1 & FUSB300_IGR1_CX_CMDEND_INT) + printk(KERN_INFO "fusb300_cmdend\n"); + + + if (int_grp1 & FUSB300_IGR1_CX_OUT_INT) { + printk(KERN_INFO "fusb300_cxout\n"); + fusb300_ep0out(fusb300); + } + + if (int_grp1 & FUSB300_IGR1_CX_IN_INT) { + printk(KERN_INFO "fusb300_cxin\n"); + fusb300_ep0in(fusb300); + } + + if (int_grp1 & FUSB300_IGR1_INTGRP5) + fusb300_grp5_handler(); + + if (int_grp1 & FUSB300_IGR1_INTGRP4) + fusb300_grp4_handler(); + + if (int_grp1 & FUSB300_IGR1_INTGRP3) + fusb300_grp3_handler(); + + if (int_grp1 & FUSB300_IGR1_INTGRP2) + fusb300_grp2_handler(); + + if (int_grp0) { + for (i = 1; i < FUSB300_MAX_NUM_EP; i++) { + if (int_grp0 & FUSB300_IGR0_EPn_FIFO_INT(i)) { + reg = ioread32(fusb300->reg + + FUSB300_OFFSET_EPSET1(i)); + in = (reg & FUSB300_EPSET1_DIRIN) ? 1 : 0; + if (in) + in_ep_fifo_handler(fusb300->ep[i]); + else + out_ep_fifo_handler(fusb300->ep[i]); + } + } + } + + spin_unlock(&fusb300->lock); + + return IRQ_HANDLED; +} + +static void fusb300_set_u2_timeout(struct fusb300 *fusb300, + u32 time) +{ + u32 reg; + + reg = ioread32(fusb300->reg + FUSB300_OFFSET_TT); + reg &= ~0xff; + reg |= FUSB300_SSCR2_U2TIMEOUT(time); + + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_TT); +} + +static void fusb300_set_u1_timeout(struct fusb300 *fusb300, + u32 time) +{ + u32 reg; + + reg = ioread32(fusb300->reg + FUSB300_OFFSET_TT); + reg &= ~(0xff << 8); + reg |= FUSB300_SSCR2_U1TIMEOUT(time); + + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_TT); +} + +static void init_controller(struct fusb300 *fusb300) +{ + u32 reg; + u32 mask = 0; + u32 val = 0; + + /* split on */ + mask = val = FUSB300_AHBBCR_S0_SPLIT_ON | FUSB300_AHBBCR_S1_SPLIT_ON; + reg = ioread32(fusb300->reg + FUSB300_OFFSET_AHBCR); + reg &= ~mask; + reg |= val; + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_AHBCR); + + /* enable high-speed LPM */ + mask = val = FUSB300_HSCR_HS_LPM_PERMIT; + reg = ioread32(fusb300->reg + FUSB300_OFFSET_HSCR); + reg &= ~mask; + reg |= val; + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_HSCR); + + /*set u1 u2 timmer*/ + fusb300_set_u2_timeout(fusb300, 0xff); + fusb300_set_u1_timeout(fusb300, 0xff); + + /* enable all grp1 interrupt */ + iowrite32(0xcfffff9f, fusb300->reg + FUSB300_OFFSET_IGER1); +} +/*------------------------------------------------------------------------*/ +static int fusb300_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) +{ + struct fusb300 *fusb300 = to_fusb300(g); + + /* hook up the driver */ + fusb300->driver = driver; + + return 0; +} + +static int fusb300_udc_stop(struct usb_gadget *g) +{ + struct fusb300 *fusb300 = to_fusb300(g); + + init_controller(fusb300); + fusb300->driver = NULL; + + return 0; +} +/*--------------------------------------------------------------------------*/ + +static int fusb300_udc_pullup(struct usb_gadget *_gadget, int is_active) +{ + return 0; +} + +static const struct usb_gadget_ops fusb300_gadget_ops = { + .pullup = fusb300_udc_pullup, + .udc_start = fusb300_udc_start, + .udc_stop = fusb300_udc_stop, +}; + +static int fusb300_remove(struct platform_device *pdev) +{ + struct fusb300 *fusb300 = platform_get_drvdata(pdev); + int i; + + usb_del_gadget_udc(&fusb300->gadget); + iounmap(fusb300->reg); + free_irq(platform_get_irq(pdev, 0), fusb300); + free_irq(platform_get_irq(pdev, 1), fusb300); + + fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req); + for (i = 0; i < FUSB300_MAX_NUM_EP; i++) + kfree(fusb300->ep[i]); + kfree(fusb300); + + return 0; +} + +static int fusb300_probe(struct platform_device *pdev) +{ + struct resource *res, *ires, *ires1; + void __iomem *reg = NULL; + struct fusb300 *fusb300 = NULL; + struct fusb300_ep *_ep[FUSB300_MAX_NUM_EP]; + int ret = 0; + int i; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENODEV; + pr_err("platform_get_resource error.\n"); + goto clean_up; + } + + ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!ires) { + ret = -ENODEV; + dev_err(&pdev->dev, + "platform_get_resource IORESOURCE_IRQ error.\n"); + goto clean_up; + } + + ires1 = platform_get_resource(pdev, IORESOURCE_IRQ, 1); + if (!ires1) { + ret = -ENODEV; + dev_err(&pdev->dev, + "platform_get_resource IORESOURCE_IRQ 1 error.\n"); + goto clean_up; + } + + reg = ioremap(res->start, resource_size(res)); + if (reg == NULL) { + ret = -ENOMEM; + pr_err("ioremap error.\n"); + goto clean_up; + } + + /* initialize udc */ + fusb300 = kzalloc(sizeof(struct fusb300), GFP_KERNEL); + if (fusb300 == NULL) { + ret = -ENOMEM; + goto clean_up; + } + + for (i = 0; i < FUSB300_MAX_NUM_EP; i++) { + _ep[i] = kzalloc(sizeof(struct fusb300_ep), GFP_KERNEL); + if (_ep[i] == NULL) { + ret = -ENOMEM; + goto clean_up; + } + fusb300->ep[i] = _ep[i]; + } + + spin_lock_init(&fusb300->lock); + + platform_set_drvdata(pdev, fusb300); + + fusb300->gadget.ops = &fusb300_gadget_ops; + + fusb300->gadget.max_speed = USB_SPEED_HIGH; + fusb300->gadget.name = udc_name; + fusb300->reg = reg; + + ret = request_irq(ires->start, fusb300_irq, IRQF_SHARED, + udc_name, fusb300); + if (ret < 0) { + pr_err("request_irq error (%d)\n", ret); + goto clean_up; + } + + ret = request_irq(ires1->start, fusb300_irq, + IRQF_SHARED, udc_name, fusb300); + if (ret < 0) { + pr_err("request_irq1 error (%d)\n", ret); + goto err_request_irq1; + } + + INIT_LIST_HEAD(&fusb300->gadget.ep_list); + + for (i = 0; i < FUSB300_MAX_NUM_EP ; i++) { + struct fusb300_ep *ep = fusb300->ep[i]; + + if (i != 0) { + INIT_LIST_HEAD(&fusb300->ep[i]->ep.ep_list); + list_add_tail(&fusb300->ep[i]->ep.ep_list, + &fusb300->gadget.ep_list); + } + ep->fusb300 = fusb300; + INIT_LIST_HEAD(&ep->queue); + ep->ep.name = fusb300_ep_name[i]; + ep->ep.ops = &fusb300_ep_ops; + usb_ep_set_maxpacket_limit(&ep->ep, HS_BULK_MAX_PACKET_SIZE); + + if (i == 0) { + ep->ep.caps.type_control = true; + } else { + ep->ep.caps.type_iso = true; + ep->ep.caps.type_bulk = true; + ep->ep.caps.type_int = true; + } + + ep->ep.caps.dir_in = true; + ep->ep.caps.dir_out = true; + } + usb_ep_set_maxpacket_limit(&fusb300->ep[0]->ep, HS_CTL_MAX_PACKET_SIZE); + fusb300->ep[0]->epnum = 0; + fusb300->gadget.ep0 = &fusb300->ep[0]->ep; + INIT_LIST_HEAD(&fusb300->gadget.ep0->ep_list); + + fusb300->ep0_req = fusb300_alloc_request(&fusb300->ep[0]->ep, + GFP_KERNEL); + if (fusb300->ep0_req == NULL) { + ret = -ENOMEM; + goto err_alloc_request; + } + + init_controller(fusb300); + ret = usb_add_gadget_udc(&pdev->dev, &fusb300->gadget); + if (ret) + goto err_add_udc; + + dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION); + + return 0; + +err_add_udc: + fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req); + +err_alloc_request: + free_irq(ires1->start, fusb300); + +err_request_irq1: + free_irq(ires->start, fusb300); + +clean_up: + if (fusb300) { + if (fusb300->ep0_req) + fusb300_free_request(&fusb300->ep[0]->ep, + fusb300->ep0_req); + for (i = 0; i < FUSB300_MAX_NUM_EP; i++) + kfree(fusb300->ep[i]); + kfree(fusb300); + } + if (reg) + iounmap(reg); + + return ret; +} + +static struct platform_driver fusb300_driver = { + .remove = fusb300_remove, + .driver = { + .name = udc_name, + }, +}; + +module_platform_driver_probe(fusb300_driver, fusb300_probe); diff --git a/drivers/usb/gadget/udc/fusb300_udc.h b/drivers/usb/gadget/udc/fusb300_udc.h new file mode 100644 index 000000000..eb3d6d379 --- /dev/null +++ b/drivers/usb/gadget/udc/fusb300_udc.h @@ -0,0 +1,675 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Fusb300 UDC (USB gadget) + * + * Copyright (C) 2010 Faraday Technology Corp. + * + * Author : Yuan-hsin Chen <yhchen@faraday-tech.com> + */ + + +#ifndef __FUSB300_UDC_H__ +#define __FUSB300_UDC_H__ + +#include <linux/kernel.h> + +#define FUSB300_OFFSET_GCR 0x00 +#define FUSB300_OFFSET_GTM 0x04 +#define FUSB300_OFFSET_DAR 0x08 +#define FUSB300_OFFSET_CSR 0x0C +#define FUSB300_OFFSET_CXPORT 0x10 +#define FUSB300_OFFSET_EPSET0(n) (0x20 + (n - 1) * 0x30) +#define FUSB300_OFFSET_EPSET1(n) (0x24 + (n - 1) * 0x30) +#define FUSB300_OFFSET_EPSET2(n) (0x28 + (n - 1) * 0x30) +#define FUSB300_OFFSET_EPFFR(n) (0x2c + (n - 1) * 0x30) +#define FUSB300_OFFSET_EPSTRID(n) (0x40 + (n - 1) * 0x30) +#define FUSB300_OFFSET_HSPTM 0x300 +#define FUSB300_OFFSET_HSCR 0x304 +#define FUSB300_OFFSET_SSCR0 0x308 +#define FUSB300_OFFSET_SSCR1 0x30C +#define FUSB300_OFFSET_TT 0x310 +#define FUSB300_OFFSET_DEVNOTF 0x314 +#define FUSB300_OFFSET_DNC1 0x318 +#define FUSB300_OFFSET_CS 0x31C +#define FUSB300_OFFSET_SOF 0x324 +#define FUSB300_OFFSET_EFCS 0x328 +#define FUSB300_OFFSET_IGR0 0x400 +#define FUSB300_OFFSET_IGR1 0x404 +#define FUSB300_OFFSET_IGR2 0x408 +#define FUSB300_OFFSET_IGR3 0x40C +#define FUSB300_OFFSET_IGR4 0x410 +#define FUSB300_OFFSET_IGR5 0x414 +#define FUSB300_OFFSET_IGER0 0x420 +#define FUSB300_OFFSET_IGER1 0x424 +#define FUSB300_OFFSET_IGER2 0x428 +#define FUSB300_OFFSET_IGER3 0x42C +#define FUSB300_OFFSET_IGER4 0x430 +#define FUSB300_OFFSET_IGER5 0x434 +#define FUSB300_OFFSET_DMAHMER 0x500 +#define FUSB300_OFFSET_EPPRDRDY 0x504 +#define FUSB300_OFFSET_DMAEPMR 0x508 +#define FUSB300_OFFSET_DMAENR 0x50C +#define FUSB300_OFFSET_DMAAPR 0x510 +#define FUSB300_OFFSET_AHBCR 0x514 +#define FUSB300_OFFSET_EPPRD_W0(n) (0x520 + (n - 1) * 0x10) +#define FUSB300_OFFSET_EPPRD_W1(n) (0x524 + (n - 1) * 0x10) +#define FUSB300_OFFSET_EPPRD_W2(n) (0x528 + (n - 1) * 0x10) +#define FUSB300_OFFSET_EPRD_PTR(n) (0x52C + (n - 1) * 0x10) +#define FUSB300_OFFSET_BUFDBG_START 0x800 +#define FUSB300_OFFSET_BUFDBG_END 0xBFC +#define FUSB300_OFFSET_EPPORT(n) (0x1010 + (n - 1) * 0x10) + +/* + * * Global Control Register (offset = 000H) + * */ +#define FUSB300_GCR_SF_RST (1 << 8) +#define FUSB300_GCR_VBUS_STATUS (1 << 7) +#define FUSB300_GCR_FORCE_HS_SUSP (1 << 6) +#define FUSB300_GCR_SYNC_FIFO1_CLR (1 << 5) +#define FUSB300_GCR_SYNC_FIFO0_CLR (1 << 4) +#define FUSB300_GCR_FIFOCLR (1 << 3) +#define FUSB300_GCR_GLINTEN (1 << 2) +#define FUSB300_GCR_DEVEN_FS 0x3 +#define FUSB300_GCR_DEVEN_HS 0x2 +#define FUSB300_GCR_DEVEN_SS 0x1 +#define FUSB300_GCR_DEVDIS 0x0 +#define FUSB300_GCR_DEVEN_MSK 0x3 + + +/* + * *Global Test Mode (offset = 004H) + * */ +#define FUSB300_GTM_TST_DIS_SOFGEN (1 << 16) +#define FUSB300_GTM_TST_CUR_EP_ENTRY(n) ((n & 0xF) << 12) +#define FUSB300_GTM_TST_EP_ENTRY(n) ((n & 0xF) << 8) +#define FUSB300_GTM_TST_EP_NUM(n) ((n & 0xF) << 4) +#define FUSB300_GTM_TST_FIFO_DEG (1 << 1) +#define FUSB300_GTM_TSTMODE (1 << 0) + +/* + * * Device Address Register (offset = 008H) + * */ +#define FUSB300_DAR_SETCONFG (1 << 7) +#define FUSB300_DAR_DRVADDR(x) (x & 0x7F) +#define FUSB300_DAR_DRVADDR_MSK 0x7F + +/* + * *Control Transfer Configuration and Status Register + * (CX_Config_Status, offset = 00CH) + * */ +#define FUSB300_CSR_LEN(x) ((x & 0xFFFF) << 8) +#define FUSB300_CSR_LEN_MSK (0xFFFF << 8) +#define FUSB300_CSR_EMP (1 << 4) +#define FUSB300_CSR_FUL (1 << 3) +#define FUSB300_CSR_CLR (1 << 2) +#define FUSB300_CSR_STL (1 << 1) +#define FUSB300_CSR_DONE (1 << 0) + +/* + * * EPn Setting 0 (EPn_SET0, offset = 020H+(n-1)*30H, n=1~15 ) + * */ +#define FUSB300_EPSET0_STL_CLR (1 << 3) +#define FUSB300_EPSET0_CLRSEQNUM (1 << 2) +#define FUSB300_EPSET0_STL (1 << 0) + +/* + * * EPn Setting 1 (EPn_SET1, offset = 024H+(n-1)*30H, n=1~15) + * */ +#define FUSB300_EPSET1_START_ENTRY(x) ((x & 0xFF) << 24) +#define FUSB300_EPSET1_START_ENTRY_MSK (0xFF << 24) +#define FUSB300_EPSET1_FIFOENTRY(x) ((x & 0x1F) << 12) +#define FUSB300_EPSET1_FIFOENTRY_MSK (0x1f << 12) +#define FUSB300_EPSET1_INTERVAL(x) ((x & 0x7) << 6) +#define FUSB300_EPSET1_BWNUM(x) ((x & 0x3) << 4) +#define FUSB300_EPSET1_TYPEISO (1 << 2) +#define FUSB300_EPSET1_TYPEBLK (2 << 2) +#define FUSB300_EPSET1_TYPEINT (3 << 2) +#define FUSB300_EPSET1_TYPE(x) ((x & 0x3) << 2) +#define FUSB300_EPSET1_TYPE_MSK (0x3 << 2) +#define FUSB300_EPSET1_DIROUT (0 << 1) +#define FUSB300_EPSET1_DIRIN (1 << 1) +#define FUSB300_EPSET1_DIR(x) ((x & 0x1) << 1) +#define FUSB300_EPSET1_DIRIN (1 << 1) +#define FUSB300_EPSET1_DIR_MSK ((0x1) << 1) +#define FUSB300_EPSET1_ACTDIS 0 +#define FUSB300_EPSET1_ACTEN 1 + +/* + * *EPn Setting 2 (EPn_SET2, offset = 028H+(n-1)*30H, n=1~15) + * */ +#define FUSB300_EPSET2_ADDROFS(x) ((x & 0x7FFF) << 16) +#define FUSB300_EPSET2_ADDROFS_MSK (0x7fff << 16) +#define FUSB300_EPSET2_MPS(x) (x & 0x7FF) +#define FUSB300_EPSET2_MPS_MSK 0x7FF + +/* + * * EPn FIFO Register (offset = 2cH+(n-1)*30H) + * */ +#define FUSB300_FFR_RST (1 << 31) +#define FUSB300_FF_FUL (1 << 30) +#define FUSB300_FF_EMPTY (1 << 29) +#define FUSB300_FFR_BYCNT 0x1FFFF + +/* + * *EPn Stream ID (EPn_STR_ID, offset = 040H+(n-1)*30H, n=1~15) + * */ +#define FUSB300_STRID_STREN (1 << 16) +#define FUSB300_STRID_STRID(x) (x & 0xFFFF) + +/* + * *HS PHY Test Mode (offset = 300H) + * */ +#define FUSB300_HSPTM_TSTPKDONE (1 << 4) +#define FUSB300_HSPTM_TSTPKT (1 << 3) +#define FUSB300_HSPTM_TSTSET0NAK (1 << 2) +#define FUSB300_HSPTM_TSTKSTA (1 << 1) +#define FUSB300_HSPTM_TSTJSTA (1 << 0) + +/* + * *HS Control Register (offset = 304H) + * */ +#define FUSB300_HSCR_HS_LPM_PERMIT (1 << 8) +#define FUSB300_HSCR_HS_LPM_RMWKUP (1 << 7) +#define FUSB300_HSCR_CAP_LPM_RMWKUP (1 << 6) +#define FUSB300_HSCR_HS_GOSUSP (1 << 5) +#define FUSB300_HSCR_HS_GORMWKU (1 << 4) +#define FUSB300_HSCR_CAP_RMWKUP (1 << 3) +#define FUSB300_HSCR_IDLECNT_0MS 0 +#define FUSB300_HSCR_IDLECNT_1MS 1 +#define FUSB300_HSCR_IDLECNT_2MS 2 +#define FUSB300_HSCR_IDLECNT_3MS 3 +#define FUSB300_HSCR_IDLECNT_4MS 4 +#define FUSB300_HSCR_IDLECNT_5MS 5 +#define FUSB300_HSCR_IDLECNT_6MS 6 +#define FUSB300_HSCR_IDLECNT_7MS 7 + +/* + * * SS Controller Register 0 (offset = 308H) + * */ +#define FUSB300_SSCR0_MAX_INTERVAL(x) ((x & 0x7) << 4) +#define FUSB300_SSCR0_U2_FUN_EN (1 << 1) +#define FUSB300_SSCR0_U1_FUN_EN (1 << 0) + +/* + * * SS Controller Register 1 (offset = 30CH) + * */ +#define FUSB300_SSCR1_GO_U3_DONE (1 << 8) +#define FUSB300_SSCR1_TXDEEMPH_LEVEL (1 << 7) +#define FUSB300_SSCR1_DIS_SCRMB (1 << 6) +#define FUSB300_SSCR1_FORCE_RECOVERY (1 << 5) +#define FUSB300_SSCR1_U3_WAKEUP_EN (1 << 4) +#define FUSB300_SSCR1_U2_EXIT_EN (1 << 3) +#define FUSB300_SSCR1_U1_EXIT_EN (1 << 2) +#define FUSB300_SSCR1_U2_ENTRY_EN (1 << 1) +#define FUSB300_SSCR1_U1_ENTRY_EN (1 << 0) + +/* + * *SS Controller Register 2 (offset = 310H) + * */ +#define FUSB300_SSCR2_SS_TX_SWING (1 << 25) +#define FUSB300_SSCR2_FORCE_LINKPM_ACCEPT (1 << 24) +#define FUSB300_SSCR2_U2_INACT_TIMEOUT(x) ((x & 0xFF) << 16) +#define FUSB300_SSCR2_U1TIMEOUT(x) ((x & 0xFF) << 8) +#define FUSB300_SSCR2_U2TIMEOUT(x) (x & 0xFF) + +/* + * *SS Device Notification Control (DEV_NOTF, offset = 314H) + * */ +#define FUSB300_DEVNOTF_CONTEXT0(x) ((x & 0xFFFFFF) << 8) +#define FUSB300_DEVNOTF_TYPE_DIS 0 +#define FUSB300_DEVNOTF_TYPE_FUNCWAKE 1 +#define FUSB300_DEVNOTF_TYPE_LTM 2 +#define FUSB300_DEVNOTF_TYPE_BUSINT_ADJMSG 3 + +/* + * *BFM Arbiter Priority Register (BFM_ARB offset = 31CH) + * */ +#define FUSB300_BFMARB_ARB_M1 (1 << 3) +#define FUSB300_BFMARB_ARB_M0 (1 << 2) +#define FUSB300_BFMARB_ARB_S1 (1 << 1) +#define FUSB300_BFMARB_ARB_S0 1 + +/* + * *Vendor Specific IO Control Register (offset = 320H) + * */ +#define FUSB300_VSIC_VCTLOAD_N (1 << 8) +#define FUSB300_VSIC_VCTL(x) (x & 0x3F) + +/* + * *SOF Mask Timer (offset = 324H) + * */ +#define FUSB300_SOF_MASK_TIMER_HS 0x044c +#define FUSB300_SOF_MASK_TIMER_FS 0x2710 + +/* + * *Error Flag and Control Status (offset = 328H) + * */ +#define FUSB300_EFCS_PM_STATE_U3 3 +#define FUSB300_EFCS_PM_STATE_U2 2 +#define FUSB300_EFCS_PM_STATE_U1 1 +#define FUSB300_EFCS_PM_STATE_U0 0 + +/* + * *Interrupt Group 0 Register (offset = 400H) + * */ +#define FUSB300_IGR0_EP15_PRD_INT (1 << 31) +#define FUSB300_IGR0_EP14_PRD_INT (1 << 30) +#define FUSB300_IGR0_EP13_PRD_INT (1 << 29) +#define FUSB300_IGR0_EP12_PRD_INT (1 << 28) +#define FUSB300_IGR0_EP11_PRD_INT (1 << 27) +#define FUSB300_IGR0_EP10_PRD_INT (1 << 26) +#define FUSB300_IGR0_EP9_PRD_INT (1 << 25) +#define FUSB300_IGR0_EP8_PRD_INT (1 << 24) +#define FUSB300_IGR0_EP7_PRD_INT (1 << 23) +#define FUSB300_IGR0_EP6_PRD_INT (1 << 22) +#define FUSB300_IGR0_EP5_PRD_INT (1 << 21) +#define FUSB300_IGR0_EP4_PRD_INT (1 << 20) +#define FUSB300_IGR0_EP3_PRD_INT (1 << 19) +#define FUSB300_IGR0_EP2_PRD_INT (1 << 18) +#define FUSB300_IGR0_EP1_PRD_INT (1 << 17) +#define FUSB300_IGR0_EPn_PRD_INT(n) (1 << (n + 16)) + +#define FUSB300_IGR0_EP15_FIFO_INT (1 << 15) +#define FUSB300_IGR0_EP14_FIFO_INT (1 << 14) +#define FUSB300_IGR0_EP13_FIFO_INT (1 << 13) +#define FUSB300_IGR0_EP12_FIFO_INT (1 << 12) +#define FUSB300_IGR0_EP11_FIFO_INT (1 << 11) +#define FUSB300_IGR0_EP10_FIFO_INT (1 << 10) +#define FUSB300_IGR0_EP9_FIFO_INT (1 << 9) +#define FUSB300_IGR0_EP8_FIFO_INT (1 << 8) +#define FUSB300_IGR0_EP7_FIFO_INT (1 << 7) +#define FUSB300_IGR0_EP6_FIFO_INT (1 << 6) +#define FUSB300_IGR0_EP5_FIFO_INT (1 << 5) +#define FUSB300_IGR0_EP4_FIFO_INT (1 << 4) +#define FUSB300_IGR0_EP3_FIFO_INT (1 << 3) +#define FUSB300_IGR0_EP2_FIFO_INT (1 << 2) +#define FUSB300_IGR0_EP1_FIFO_INT (1 << 1) +#define FUSB300_IGR0_EPn_FIFO_INT(n) (1 << n) + +/* + * *Interrupt Group 1 Register (offset = 404H) + * */ +#define FUSB300_IGR1_INTGRP5 (1 << 31) +#define FUSB300_IGR1_VBUS_CHG_INT (1 << 30) +#define FUSB300_IGR1_SYNF1_EMPTY_INT (1 << 29) +#define FUSB300_IGR1_SYNF0_EMPTY_INT (1 << 28) +#define FUSB300_IGR1_U3_EXIT_FAIL_INT (1 << 27) +#define FUSB300_IGR1_U2_EXIT_FAIL_INT (1 << 26) +#define FUSB300_IGR1_U1_EXIT_FAIL_INT (1 << 25) +#define FUSB300_IGR1_U2_ENTRY_FAIL_INT (1 << 24) +#define FUSB300_IGR1_U1_ENTRY_FAIL_INT (1 << 23) +#define FUSB300_IGR1_U3_EXIT_INT (1 << 22) +#define FUSB300_IGR1_U2_EXIT_INT (1 << 21) +#define FUSB300_IGR1_U1_EXIT_INT (1 << 20) +#define FUSB300_IGR1_U3_ENTRY_INT (1 << 19) +#define FUSB300_IGR1_U2_ENTRY_INT (1 << 18) +#define FUSB300_IGR1_U1_ENTRY_INT (1 << 17) +#define FUSB300_IGR1_HOT_RST_INT (1 << 16) +#define FUSB300_IGR1_WARM_RST_INT (1 << 15) +#define FUSB300_IGR1_RESM_INT (1 << 14) +#define FUSB300_IGR1_SUSP_INT (1 << 13) +#define FUSB300_IGR1_HS_LPM_INT (1 << 12) +#define FUSB300_IGR1_USBRST_INT (1 << 11) +#define FUSB300_IGR1_DEV_MODE_CHG_INT (1 << 9) +#define FUSB300_IGR1_CX_COMABT_INT (1 << 8) +#define FUSB300_IGR1_CX_COMFAIL_INT (1 << 7) +#define FUSB300_IGR1_CX_CMDEND_INT (1 << 6) +#define FUSB300_IGR1_CX_OUT_INT (1 << 5) +#define FUSB300_IGR1_CX_IN_INT (1 << 4) +#define FUSB300_IGR1_CX_SETUP_INT (1 << 3) +#define FUSB300_IGR1_INTGRP4 (1 << 2) +#define FUSB300_IGR1_INTGRP3 (1 << 1) +#define FUSB300_IGR1_INTGRP2 (1 << 0) + +/* + * *Interrupt Group 2 Register (offset = 408H) + * */ +#define FUSB300_IGR2_EP6_STR_ACCEPT_INT (1 << 29) +#define FUSB300_IGR2_EP6_STR_RESUME_INT (1 << 28) +#define FUSB300_IGR2_EP6_STR_REQ_INT (1 << 27) +#define FUSB300_IGR2_EP6_STR_NOTRDY_INT (1 << 26) +#define FUSB300_IGR2_EP6_STR_PRIME_INT (1 << 25) +#define FUSB300_IGR2_EP5_STR_ACCEPT_INT (1 << 24) +#define FUSB300_IGR2_EP5_STR_RESUME_INT (1 << 23) +#define FUSB300_IGR2_EP5_STR_REQ_INT (1 << 22) +#define FUSB300_IGR2_EP5_STR_NOTRDY_INT (1 << 21) +#define FUSB300_IGR2_EP5_STR_PRIME_INT (1 << 20) +#define FUSB300_IGR2_EP4_STR_ACCEPT_INT (1 << 19) +#define FUSB300_IGR2_EP4_STR_RESUME_INT (1 << 18) +#define FUSB300_IGR2_EP4_STR_REQ_INT (1 << 17) +#define FUSB300_IGR2_EP4_STR_NOTRDY_INT (1 << 16) +#define FUSB300_IGR2_EP4_STR_PRIME_INT (1 << 15) +#define FUSB300_IGR2_EP3_STR_ACCEPT_INT (1 << 14) +#define FUSB300_IGR2_EP3_STR_RESUME_INT (1 << 13) +#define FUSB300_IGR2_EP3_STR_REQ_INT (1 << 12) +#define FUSB300_IGR2_EP3_STR_NOTRDY_INT (1 << 11) +#define FUSB300_IGR2_EP3_STR_PRIME_INT (1 << 10) +#define FUSB300_IGR2_EP2_STR_ACCEPT_INT (1 << 9) +#define FUSB300_IGR2_EP2_STR_RESUME_INT (1 << 8) +#define FUSB300_IGR2_EP2_STR_REQ_INT (1 << 7) +#define FUSB300_IGR2_EP2_STR_NOTRDY_INT (1 << 6) +#define FUSB300_IGR2_EP2_STR_PRIME_INT (1 << 5) +#define FUSB300_IGR2_EP1_STR_ACCEPT_INT (1 << 4) +#define FUSB300_IGR2_EP1_STR_RESUME_INT (1 << 3) +#define FUSB300_IGR2_EP1_STR_REQ_INT (1 << 2) +#define FUSB300_IGR2_EP1_STR_NOTRDY_INT (1 << 1) +#define FUSB300_IGR2_EP1_STR_PRIME_INT (1 << 0) + +#define FUSB300_IGR2_EP_STR_ACCEPT_INT(n) (1 << (5 * n - 1)) +#define FUSB300_IGR2_EP_STR_RESUME_INT(n) (1 << (5 * n - 2)) +#define FUSB300_IGR2_EP_STR_REQ_INT(n) (1 << (5 * n - 3)) +#define FUSB300_IGR2_EP_STR_NOTRDY_INT(n) (1 << (5 * n - 4)) +#define FUSB300_IGR2_EP_STR_PRIME_INT(n) (1 << (5 * n - 5)) + +/* + * *Interrupt Group 3 Register (offset = 40CH) + * */ +#define FUSB300_IGR3_EP12_STR_ACCEPT_INT (1 << 29) +#define FUSB300_IGR3_EP12_STR_RESUME_INT (1 << 28) +#define FUSB300_IGR3_EP12_STR_REQ_INT (1 << 27) +#define FUSB300_IGR3_EP12_STR_NOTRDY_INT (1 << 26) +#define FUSB300_IGR3_EP12_STR_PRIME_INT (1 << 25) +#define FUSB300_IGR3_EP11_STR_ACCEPT_INT (1 << 24) +#define FUSB300_IGR3_EP11_STR_RESUME_INT (1 << 23) +#define FUSB300_IGR3_EP11_STR_REQ_INT (1 << 22) +#define FUSB300_IGR3_EP11_STR_NOTRDY_INT (1 << 21) +#define FUSB300_IGR3_EP11_STR_PRIME_INT (1 << 20) +#define FUSB300_IGR3_EP10_STR_ACCEPT_INT (1 << 19) +#define FUSB300_IGR3_EP10_STR_RESUME_INT (1 << 18) +#define FUSB300_IGR3_EP10_STR_REQ_INT (1 << 17) +#define FUSB300_IGR3_EP10_STR_NOTRDY_INT (1 << 16) +#define FUSB300_IGR3_EP10_STR_PRIME_INT (1 << 15) +#define FUSB300_IGR3_EP9_STR_ACCEPT_INT (1 << 14) +#define FUSB300_IGR3_EP9_STR_RESUME_INT (1 << 13) +#define FUSB300_IGR3_EP9_STR_REQ_INT (1 << 12) +#define FUSB300_IGR3_EP9_STR_NOTRDY_INT (1 << 11) +#define FUSB300_IGR3_EP9_STR_PRIME_INT (1 << 10) +#define FUSB300_IGR3_EP8_STR_ACCEPT_INT (1 << 9) +#define FUSB300_IGR3_EP8_STR_RESUME_INT (1 << 8) +#define FUSB300_IGR3_EP8_STR_REQ_INT (1 << 7) +#define FUSB300_IGR3_EP8_STR_NOTRDY_INT (1 << 6) +#define FUSB300_IGR3_EP8_STR_PRIME_INT (1 << 5) +#define FUSB300_IGR3_EP7_STR_ACCEPT_INT (1 << 4) +#define FUSB300_IGR3_EP7_STR_RESUME_INT (1 << 3) +#define FUSB300_IGR3_EP7_STR_REQ_INT (1 << 2) +#define FUSB300_IGR3_EP7_STR_NOTRDY_INT (1 << 1) +#define FUSB300_IGR3_EP7_STR_PRIME_INT (1 << 0) + +#define FUSB300_IGR3_EP_STR_ACCEPT_INT(n) (1 << (5 * (n - 6) - 1)) +#define FUSB300_IGR3_EP_STR_RESUME_INT(n) (1 << (5 * (n - 6) - 2)) +#define FUSB300_IGR3_EP_STR_REQ_INT(n) (1 << (5 * (n - 6) - 3)) +#define FUSB300_IGR3_EP_STR_NOTRDY_INT(n) (1 << (5 * (n - 6) - 4)) +#define FUSB300_IGR3_EP_STR_PRIME_INT(n) (1 << (5 * (n - 6) - 5)) + +/* + * *Interrupt Group 4 Register (offset = 410H) + * */ +#define FUSB300_IGR4_EP15_RX0_INT (1 << 31) +#define FUSB300_IGR4_EP14_RX0_INT (1 << 30) +#define FUSB300_IGR4_EP13_RX0_INT (1 << 29) +#define FUSB300_IGR4_EP12_RX0_INT (1 << 28) +#define FUSB300_IGR4_EP11_RX0_INT (1 << 27) +#define FUSB300_IGR4_EP10_RX0_INT (1 << 26) +#define FUSB300_IGR4_EP9_RX0_INT (1 << 25) +#define FUSB300_IGR4_EP8_RX0_INT (1 << 24) +#define FUSB300_IGR4_EP7_RX0_INT (1 << 23) +#define FUSB300_IGR4_EP6_RX0_INT (1 << 22) +#define FUSB300_IGR4_EP5_RX0_INT (1 << 21) +#define FUSB300_IGR4_EP4_RX0_INT (1 << 20) +#define FUSB300_IGR4_EP3_RX0_INT (1 << 19) +#define FUSB300_IGR4_EP2_RX0_INT (1 << 18) +#define FUSB300_IGR4_EP1_RX0_INT (1 << 17) +#define FUSB300_IGR4_EP_RX0_INT(x) (1 << (x + 16)) +#define FUSB300_IGR4_EP15_STR_ACCEPT_INT (1 << 14) +#define FUSB300_IGR4_EP15_STR_RESUME_INT (1 << 13) +#define FUSB300_IGR4_EP15_STR_REQ_INT (1 << 12) +#define FUSB300_IGR4_EP15_STR_NOTRDY_INT (1 << 11) +#define FUSB300_IGR4_EP15_STR_PRIME_INT (1 << 10) +#define FUSB300_IGR4_EP14_STR_ACCEPT_INT (1 << 9) +#define FUSB300_IGR4_EP14_STR_RESUME_INT (1 << 8) +#define FUSB300_IGR4_EP14_STR_REQ_INT (1 << 7) +#define FUSB300_IGR4_EP14_STR_NOTRDY_INT (1 << 6) +#define FUSB300_IGR4_EP14_STR_PRIME_INT (1 << 5) +#define FUSB300_IGR4_EP13_STR_ACCEPT_INT (1 << 4) +#define FUSB300_IGR4_EP13_STR_RESUME_INT (1 << 3) +#define FUSB300_IGR4_EP13_STR_REQ_INT (1 << 2) +#define FUSB300_IGR4_EP13_STR_NOTRDY_INT (1 << 1) +#define FUSB300_IGR4_EP13_STR_PRIME_INT (1 << 0) + +#define FUSB300_IGR4_EP_STR_ACCEPT_INT(n) (1 << (5 * (n - 12) - 1)) +#define FUSB300_IGR4_EP_STR_RESUME_INT(n) (1 << (5 * (n - 12) - 2)) +#define FUSB300_IGR4_EP_STR_REQ_INT(n) (1 << (5 * (n - 12) - 3)) +#define FUSB300_IGR4_EP_STR_NOTRDY_INT(n) (1 << (5 * (n - 12) - 4)) +#define FUSB300_IGR4_EP_STR_PRIME_INT(n) (1 << (5 * (n - 12) - 5)) + +/* + * *Interrupt Group 5 Register (offset = 414H) + * */ +#define FUSB300_IGR5_EP_STL_INT(n) (1 << n) + +/* + * *Interrupt Enable Group 0 Register (offset = 420H) + * */ +#define FUSB300_IGER0_EEP15_PRD_INT (1 << 31) +#define FUSB300_IGER0_EEP14_PRD_INT (1 << 30) +#define FUSB300_IGER0_EEP13_PRD_INT (1 << 29) +#define FUSB300_IGER0_EEP12_PRD_INT (1 << 28) +#define FUSB300_IGER0_EEP11_PRD_INT (1 << 27) +#define FUSB300_IGER0_EEP10_PRD_INT (1 << 26) +#define FUSB300_IGER0_EEP9_PRD_INT (1 << 25) +#define FUSB300_IGER0_EP8_PRD_INT (1 << 24) +#define FUSB300_IGER0_EEP7_PRD_INT (1 << 23) +#define FUSB300_IGER0_EEP6_PRD_INT (1 << 22) +#define FUSB300_IGER0_EEP5_PRD_INT (1 << 21) +#define FUSB300_IGER0_EEP4_PRD_INT (1 << 20) +#define FUSB300_IGER0_EEP3_PRD_INT (1 << 19) +#define FUSB300_IGER0_EEP2_PRD_INT (1 << 18) +#define FUSB300_IGER0_EEP1_PRD_INT (1 << 17) +#define FUSB300_IGER0_EEPn_PRD_INT(n) (1 << (n + 16)) + +#define FUSB300_IGER0_EEP15_FIFO_INT (1 << 15) +#define FUSB300_IGER0_EEP14_FIFO_INT (1 << 14) +#define FUSB300_IGER0_EEP13_FIFO_INT (1 << 13) +#define FUSB300_IGER0_EEP12_FIFO_INT (1 << 12) +#define FUSB300_IGER0_EEP11_FIFO_INT (1 << 11) +#define FUSB300_IGER0_EEP10_FIFO_INT (1 << 10) +#define FUSB300_IGER0_EEP9_FIFO_INT (1 << 9) +#define FUSB300_IGER0_EEP8_FIFO_INT (1 << 8) +#define FUSB300_IGER0_EEP7_FIFO_INT (1 << 7) +#define FUSB300_IGER0_EEP6_FIFO_INT (1 << 6) +#define FUSB300_IGER0_EEP5_FIFO_INT (1 << 5) +#define FUSB300_IGER0_EEP4_FIFO_INT (1 << 4) +#define FUSB300_IGER0_EEP3_FIFO_INT (1 << 3) +#define FUSB300_IGER0_EEP2_FIFO_INT (1 << 2) +#define FUSB300_IGER0_EEP1_FIFO_INT (1 << 1) +#define FUSB300_IGER0_EEPn_FIFO_INT(n) (1 << n) + +/* + * *Interrupt Enable Group 1 Register (offset = 424H) + * */ +#define FUSB300_IGER1_EINT_GRP5 (1 << 31) +#define FUSB300_IGER1_VBUS_CHG_INT (1 << 30) +#define FUSB300_IGER1_SYNF1_EMPTY_INT (1 << 29) +#define FUSB300_IGER1_SYNF0_EMPTY_INT (1 << 28) +#define FUSB300_IGER1_U3_EXIT_FAIL_INT (1 << 27) +#define FUSB300_IGER1_U2_EXIT_FAIL_INT (1 << 26) +#define FUSB300_IGER1_U1_EXIT_FAIL_INT (1 << 25) +#define FUSB300_IGER1_U2_ENTRY_FAIL_INT (1 << 24) +#define FUSB300_IGER1_U1_ENTRY_FAIL_INT (1 << 23) +#define FUSB300_IGER1_U3_EXIT_INT (1 << 22) +#define FUSB300_IGER1_U2_EXIT_INT (1 << 21) +#define FUSB300_IGER1_U1_EXIT_INT (1 << 20) +#define FUSB300_IGER1_U3_ENTRY_INT (1 << 19) +#define FUSB300_IGER1_U2_ENTRY_INT (1 << 18) +#define FUSB300_IGER1_U1_ENTRY_INT (1 << 17) +#define FUSB300_IGER1_HOT_RST_INT (1 << 16) +#define FUSB300_IGER1_WARM_RST_INT (1 << 15) +#define FUSB300_IGER1_RESM_INT (1 << 14) +#define FUSB300_IGER1_SUSP_INT (1 << 13) +#define FUSB300_IGER1_LPM_INT (1 << 12) +#define FUSB300_IGER1_HS_RST_INT (1 << 11) +#define FUSB300_IGER1_EDEV_MODE_CHG_INT (1 << 9) +#define FUSB300_IGER1_CX_COMABT_INT (1 << 8) +#define FUSB300_IGER1_CX_COMFAIL_INT (1 << 7) +#define FUSB300_IGER1_CX_CMDEND_INT (1 << 6) +#define FUSB300_IGER1_CX_OUT_INT (1 << 5) +#define FUSB300_IGER1_CX_IN_INT (1 << 4) +#define FUSB300_IGER1_CX_SETUP_INT (1 << 3) +#define FUSB300_IGER1_INTGRP4 (1 << 2) +#define FUSB300_IGER1_INTGRP3 (1 << 1) +#define FUSB300_IGER1_INTGRP2 (1 << 0) + +/* + * *Interrupt Enable Group 2 Register (offset = 428H) + * */ +#define FUSB300_IGER2_EEP_STR_ACCEPT_INT(n) (1 << (5 * n - 1)) +#define FUSB300_IGER2_EEP_STR_RESUME_INT(n) (1 << (5 * n - 2)) +#define FUSB300_IGER2_EEP_STR_REQ_INT(n) (1 << (5 * n - 3)) +#define FUSB300_IGER2_EEP_STR_NOTRDY_INT(n) (1 << (5 * n - 4)) +#define FUSB300_IGER2_EEP_STR_PRIME_INT(n) (1 << (5 * n - 5)) + +/* + * *Interrupt Enable Group 3 Register (offset = 42CH) + * */ + +#define FUSB300_IGER3_EEP_STR_ACCEPT_INT(n) (1 << (5 * (n - 6) - 1)) +#define FUSB300_IGER3_EEP_STR_RESUME_INT(n) (1 << (5 * (n - 6) - 2)) +#define FUSB300_IGER3_EEP_STR_REQ_INT(n) (1 << (5 * (n - 6) - 3)) +#define FUSB300_IGER3_EEP_STR_NOTRDY_INT(n) (1 << (5 * (n - 6) - 4)) +#define FUSB300_IGER3_EEP_STR_PRIME_INT(n) (1 << (5 * (n - 6) - 5)) + +/* + * *Interrupt Enable Group 4 Register (offset = 430H) + * */ + +#define FUSB300_IGER4_EEP_RX0_INT(n) (1 << (n + 16)) +#define FUSB300_IGER4_EEP_STR_ACCEPT_INT(n) (1 << (5 * (n - 6) - 1)) +#define FUSB300_IGER4_EEP_STR_RESUME_INT(n) (1 << (5 * (n - 6) - 2)) +#define FUSB300_IGER4_EEP_STR_REQ_INT(n) (1 << (5 * (n - 6) - 3)) +#define FUSB300_IGER4_EEP_STR_NOTRDY_INT(n) (1 << (5 * (n - 6) - 4)) +#define FUSB300_IGER4_EEP_STR_PRIME_INT(n) (1 << (5 * (n - 6) - 5)) + +/* EP PRD Ready (EP_PRD_RDY, offset = 504H) */ + +#define FUSB300_EPPRDR_EP15_PRD_RDY (1 << 15) +#define FUSB300_EPPRDR_EP14_PRD_RDY (1 << 14) +#define FUSB300_EPPRDR_EP13_PRD_RDY (1 << 13) +#define FUSB300_EPPRDR_EP12_PRD_RDY (1 << 12) +#define FUSB300_EPPRDR_EP11_PRD_RDY (1 << 11) +#define FUSB300_EPPRDR_EP10_PRD_RDY (1 << 10) +#define FUSB300_EPPRDR_EP9_PRD_RDY (1 << 9) +#define FUSB300_EPPRDR_EP8_PRD_RDY (1 << 8) +#define FUSB300_EPPRDR_EP7_PRD_RDY (1 << 7) +#define FUSB300_EPPRDR_EP6_PRD_RDY (1 << 6) +#define FUSB300_EPPRDR_EP5_PRD_RDY (1 << 5) +#define FUSB300_EPPRDR_EP4_PRD_RDY (1 << 4) +#define FUSB300_EPPRDR_EP3_PRD_RDY (1 << 3) +#define FUSB300_EPPRDR_EP2_PRD_RDY (1 << 2) +#define FUSB300_EPPRDR_EP1_PRD_RDY (1 << 1) +#define FUSB300_EPPRDR_EP_PRD_RDY(n) (1 << n) + +/* AHB Bus Control Register (offset = 514H) */ +#define FUSB300_AHBBCR_S1_SPLIT_ON (1 << 17) +#define FUSB300_AHBBCR_S0_SPLIT_ON (1 << 16) +#define FUSB300_AHBBCR_S1_1entry (0 << 12) +#define FUSB300_AHBBCR_S1_4entry (3 << 12) +#define FUSB300_AHBBCR_S1_8entry (5 << 12) +#define FUSB300_AHBBCR_S1_16entry (7 << 12) +#define FUSB300_AHBBCR_S0_1entry (0 << 8) +#define FUSB300_AHBBCR_S0_4entry (3 << 8) +#define FUSB300_AHBBCR_S0_8entry (5 << 8) +#define FUSB300_AHBBCR_S0_16entry (7 << 8) +#define FUSB300_AHBBCR_M1_BURST_SINGLE (0 << 4) +#define FUSB300_AHBBCR_M1_BURST_INCR (1 << 4) +#define FUSB300_AHBBCR_M1_BURST_INCR4 (3 << 4) +#define FUSB300_AHBBCR_M1_BURST_INCR8 (5 << 4) +#define FUSB300_AHBBCR_M1_BURST_INCR16 (7 << 4) +#define FUSB300_AHBBCR_M0_BURST_SINGLE 0 +#define FUSB300_AHBBCR_M0_BURST_INCR 1 +#define FUSB300_AHBBCR_M0_BURST_INCR4 3 +#define FUSB300_AHBBCR_M0_BURST_INCR8 5 +#define FUSB300_AHBBCR_M0_BURST_INCR16 7 +#define FUSB300_IGER5_EEP_STL_INT(n) (1 << n) + +/* WORD 0 Data Structure of PRD Table */ +#define FUSB300_EPPRD0_M (1 << 30) +#define FUSB300_EPPRD0_O (1 << 29) +/* The finished prd */ +#define FUSB300_EPPRD0_F (1 << 28) +#define FUSB300_EPPRD0_I (1 << 27) +#define FUSB300_EPPRD0_A (1 << 26) +/* To decide HW point to first prd at next time */ +#define FUSB300_EPPRD0_L (1 << 25) +#define FUSB300_EPPRD0_H (1 << 24) +#define FUSB300_EPPRD0_BTC(n) (n & 0xFFFFFF) + +/*----------------------------------------------------------------------*/ +#define FUSB300_MAX_NUM_EP 16 + +#define FUSB300_FIFO_ENTRY_NUM 8 +#define FUSB300_MAX_FIFO_ENTRY 8 + +#define SS_CTL_MAX_PACKET_SIZE 0x200 +#define SS_BULK_MAX_PACKET_SIZE 0x400 +#define SS_INT_MAX_PACKET_SIZE 0x400 +#define SS_ISO_MAX_PACKET_SIZE 0x400 + +#define HS_BULK_MAX_PACKET_SIZE 0x200 +#define HS_CTL_MAX_PACKET_SIZE 0x40 +#define HS_INT_MAX_PACKET_SIZE 0x400 +#define HS_ISO_MAX_PACKET_SIZE 0x400 + +struct fusb300_ep_info { + u8 epnum; + u8 type; + u8 interval; + u8 dir_in; + u16 maxpacket; + u16 addrofs; + u16 bw_num; +}; + +struct fusb300_request { + + struct usb_request req; + struct list_head queue; +}; + + +struct fusb300_ep { + struct usb_ep ep; + struct fusb300 *fusb300; + + struct list_head queue; + unsigned stall:1; + unsigned wedged:1; + unsigned use_dma:1; + + unsigned char epnum; + unsigned char type; +}; + +struct fusb300 { + spinlock_t lock; + void __iomem *reg; + + unsigned long irq_trigger; + + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + + struct fusb300_ep *ep[FUSB300_MAX_NUM_EP]; + + struct usb_request *ep0_req; /* for internal request */ + __le16 ep0_data; + u32 ep0_length; /* for internal request */ + u8 ep0_dir; /* 0/0x80 out/in */ + + u8 fifo_entry_num; /* next start fifo entry */ + u32 addrofs; /* next fifo address offset */ + u8 reenum; /* if re-enumeration */ +}; + +#define to_fusb300(g) (container_of((g), struct fusb300, gadget)) + +#endif diff --git a/drivers/usb/gadget/udc/goku_udc.c b/drivers/usb/gadget/udc/goku_udc.c new file mode 100644 index 000000000..5ffb3d5c6 --- /dev/null +++ b/drivers/usb/gadget/udc/goku_udc.c @@ -0,0 +1,1860 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Toshiba TC86C001 ("Goku-S") USB Device Controller driver + * + * Copyright (C) 2000-2002 Lineo + * by Stuart Lynne, Tom Rushworth, and Bruce Balden + * Copyright (C) 2002 Toshiba Corporation + * Copyright (C) 2003 MontaVista Software (source@mvista.com) + */ + +/* + * This device has ep0 and three semi-configurable bulk/interrupt endpoints. + * + * - Endpoint numbering is fixed: ep{1,2,3}-bulk + * - Gadget drivers can choose ep maxpacket (8/16/32/64) + * - Gadget drivers can choose direction (IN, OUT) + * - DMA works with ep1 (OUT transfers) and ep2 (IN transfers). + */ + +// #define VERBOSE /* extra debug messages (success too) */ +// #define USB_TRACE /* packet-level success messages */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/device.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/prefetch.h> + +#include <asm/byteorder.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/unaligned.h> + + +#include "goku_udc.h" + +#define DRIVER_DESC "TC86C001 USB Device Controller" +#define DRIVER_VERSION "30-Oct 2003" + +static const char driver_name [] = "goku_udc"; +static const char driver_desc [] = DRIVER_DESC; + +MODULE_AUTHOR("source@mvista.com"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + + +/* + * IN dma behaves ok under testing, though the IN-dma abort paths don't + * seem to behave quite as expected. Used by default. + * + * OUT dma documents design problems handling the common "short packet" + * transfer termination policy; it couldn't be enabled by default, even + * if the OUT-dma abort problems had a resolution. + */ +static unsigned use_dma = 1; + +#if 0 +//#include <linux/moduleparam.h> +/* "modprobe goku_udc use_dma=1" etc + * 0 to disable dma + * 1 to use IN dma only (normal operation) + * 2 to use IN and OUT dma + */ +module_param(use_dma, uint, S_IRUGO); +#endif + +/*-------------------------------------------------------------------------*/ + +static void nuke(struct goku_ep *, int status); + +static inline void +command(struct goku_udc_regs __iomem *regs, int command, unsigned epnum) +{ + writel(COMMAND_EP(epnum) | command, ®s->Command); + udelay(300); +} + +static int +goku_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) +{ + struct goku_udc *dev; + struct goku_ep *ep; + u32 mode; + u16 max; + unsigned long flags; + + ep = container_of(_ep, struct goku_ep, ep); + if (!_ep || !desc + || desc->bDescriptorType != USB_DT_ENDPOINT) + return -EINVAL; + dev = ep->dev; + if (ep == &dev->ep[0]) + return -EINVAL; + if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + if (ep->num != usb_endpoint_num(desc)) + return -EINVAL; + + switch (usb_endpoint_type(desc)) { + case USB_ENDPOINT_XFER_BULK: + case USB_ENDPOINT_XFER_INT: + break; + default: + return -EINVAL; + } + + if ((readl(ep->reg_status) & EPxSTATUS_EP_MASK) + != EPxSTATUS_EP_INVALID) + return -EBUSY; + + /* enabling the no-toggle interrupt mode would need an api hook */ + mode = 0; + max = get_unaligned_le16(&desc->wMaxPacketSize); + switch (max) { + case 64: + mode++; + fallthrough; + case 32: + mode++; + fallthrough; + case 16: + mode++; + fallthrough; + case 8: + mode <<= 3; + break; + default: + return -EINVAL; + } + mode |= 2 << 1; /* bulk, or intr-with-toggle */ + + /* ep1/ep2 dma direction is chosen early; it works in the other + * direction, with pio. be cautious with out-dma. + */ + ep->is_in = usb_endpoint_dir_in(desc); + if (ep->is_in) { + mode |= 1; + ep->dma = (use_dma != 0) && (ep->num == UDC_MSTRD_ENDPOINT); + } else { + ep->dma = (use_dma == 2) && (ep->num == UDC_MSTWR_ENDPOINT); + if (ep->dma) + DBG(dev, "%s out-dma hides short packets\n", + ep->ep.name); + } + + spin_lock_irqsave(&ep->dev->lock, flags); + + /* ep1 and ep2 can do double buffering and/or dma */ + if (ep->num < 3) { + struct goku_udc_regs __iomem *regs = ep->dev->regs; + u32 tmp; + + /* double buffer except (for now) with pio in */ + tmp = ((ep->dma || !ep->is_in) + ? 0x10 /* double buffered */ + : 0x11 /* single buffer */ + ) << ep->num; + tmp |= readl(®s->EPxSingle); + writel(tmp, ®s->EPxSingle); + + tmp = (ep->dma ? 0x10/*dma*/ : 0x11/*pio*/) << ep->num; + tmp |= readl(®s->EPxBCS); + writel(tmp, ®s->EPxBCS); + } + writel(mode, ep->reg_mode); + command(ep->dev->regs, COMMAND_RESET, ep->num); + ep->ep.maxpacket = max; + ep->stopped = 0; + ep->ep.desc = desc; + spin_unlock_irqrestore(&ep->dev->lock, flags); + + DBG(dev, "enable %s %s %s maxpacket %u\n", ep->ep.name, + ep->is_in ? "IN" : "OUT", + ep->dma ? "dma" : "pio", + max); + + return 0; +} + +static void ep_reset(struct goku_udc_regs __iomem *regs, struct goku_ep *ep) +{ + struct goku_udc *dev = ep->dev; + + if (regs) { + command(regs, COMMAND_INVALID, ep->num); + if (ep->num) { + if (ep->num == UDC_MSTWR_ENDPOINT) + dev->int_enable &= ~(INT_MSTWREND + |INT_MSTWRTMOUT); + else if (ep->num == UDC_MSTRD_ENDPOINT) + dev->int_enable &= ~INT_MSTRDEND; + dev->int_enable &= ~INT_EPxDATASET (ep->num); + } else + dev->int_enable &= ~INT_EP0; + writel(dev->int_enable, ®s->int_enable); + readl(®s->int_enable); + if (ep->num < 3) { + struct goku_udc_regs __iomem *r = ep->dev->regs; + u32 tmp; + + tmp = readl(&r->EPxSingle); + tmp &= ~(0x11 << ep->num); + writel(tmp, &r->EPxSingle); + + tmp = readl(&r->EPxBCS); + tmp &= ~(0x11 << ep->num); + writel(tmp, &r->EPxBCS); + } + /* reset dma in case we're still using it */ + if (ep->dma) { + u32 master; + + master = readl(®s->dma_master) & MST_RW_BITS; + if (ep->num == UDC_MSTWR_ENDPOINT) { + master &= ~MST_W_BITS; + master |= MST_WR_RESET; + } else { + master &= ~MST_R_BITS; + master |= MST_RD_RESET; + } + writel(master, ®s->dma_master); + } + } + + usb_ep_set_maxpacket_limit(&ep->ep, MAX_FIFO_SIZE); + ep->ep.desc = NULL; + ep->stopped = 1; + ep->irqs = 0; + ep->dma = 0; +} + +static int goku_ep_disable(struct usb_ep *_ep) +{ + struct goku_ep *ep; + struct goku_udc *dev; + unsigned long flags; + + ep = container_of(_ep, struct goku_ep, ep); + if (!_ep || !ep->ep.desc) + return -ENODEV; + dev = ep->dev; + if (dev->ep0state == EP0_SUSPEND) + return -EBUSY; + + VDBG(dev, "disable %s\n", _ep->name); + + spin_lock_irqsave(&dev->lock, flags); + nuke(ep, -ESHUTDOWN); + ep_reset(dev->regs, ep); + spin_unlock_irqrestore(&dev->lock, flags); + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static struct usb_request * +goku_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) +{ + struct goku_request *req; + + if (!_ep) + return NULL; + req = kzalloc(sizeof *req, gfp_flags); + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->queue); + return &req->req; +} + +static void +goku_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct goku_request *req; + + if (!_ep || !_req) + return; + + req = container_of(_req, struct goku_request, req); + WARN_ON(!list_empty(&req->queue)); + kfree(req); +} + +/*-------------------------------------------------------------------------*/ + +static void +done(struct goku_ep *ep, struct goku_request *req, int status) +{ + struct goku_udc *dev; + unsigned stopped = ep->stopped; + + list_del_init(&req->queue); + + if (likely(req->req.status == -EINPROGRESS)) + req->req.status = status; + else + status = req->req.status; + + dev = ep->dev; + + if (ep->dma) + usb_gadget_unmap_request(&dev->gadget, &req->req, ep->is_in); + +#ifndef USB_TRACE + if (status && status != -ESHUTDOWN) +#endif + VDBG(dev, "complete %s req %p stat %d len %u/%u\n", + ep->ep.name, &req->req, status, + req->req.actual, req->req.length); + + /* don't modify queue heads during completion callback */ + ep->stopped = 1; + spin_unlock(&dev->lock); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&dev->lock); + ep->stopped = stopped; +} + +/*-------------------------------------------------------------------------*/ + +static inline int +write_packet(u32 __iomem *fifo, u8 *buf, struct goku_request *req, unsigned max) +{ + unsigned length, count; + + length = min(req->req.length - req->req.actual, max); + req->req.actual += length; + + count = length; + while (likely(count--)) + writel(*buf++, fifo); + return length; +} + +// return: 0 = still running, 1 = completed, negative = errno +static int write_fifo(struct goku_ep *ep, struct goku_request *req) +{ + struct goku_udc *dev = ep->dev; + u32 tmp; + u8 *buf; + unsigned count; + int is_last; + + tmp = readl(&dev->regs->DataSet); + buf = req->req.buf + req->req.actual; + prefetch(buf); + + dev = ep->dev; + if (unlikely(ep->num == 0 && dev->ep0state != EP0_IN)) + return -EL2HLT; + + /* NOTE: just single-buffered PIO-IN for now. */ + if (unlikely((tmp & DATASET_A(ep->num)) != 0)) + return 0; + + /* clear our "packet available" irq */ + if (ep->num != 0) + writel(~INT_EPxDATASET(ep->num), &dev->regs->int_status); + + count = write_packet(ep->reg_fifo, buf, req, ep->ep.maxpacket); + + /* last packet often short (sometimes a zlp, especially on ep0) */ + if (unlikely(count != ep->ep.maxpacket)) { + writel(~(1<<ep->num), &dev->regs->EOP); + if (ep->num == 0) { + dev->ep[0].stopped = 1; + dev->ep0state = EP0_STATUS; + } + is_last = 1; + } else { + if (likely(req->req.length != req->req.actual) + || req->req.zero) + is_last = 0; + else + is_last = 1; + } +#if 0 /* printk seemed to trash is_last...*/ +//#ifdef USB_TRACE + VDBG(dev, "wrote %s %u bytes%s IN %u left %p\n", + ep->ep.name, count, is_last ? "/last" : "", + req->req.length - req->req.actual, req); +#endif + + /* requests complete when all IN data is in the FIFO, + * or sometimes later, if a zlp was needed. + */ + if (is_last) { + done(ep, req, 0); + return 1; + } + + return 0; +} + +static int read_fifo(struct goku_ep *ep, struct goku_request *req) +{ + struct goku_udc_regs __iomem *regs; + u32 size, set; + u8 *buf; + unsigned bufferspace, is_short, dbuff; + + regs = ep->dev->regs; +top: + buf = req->req.buf + req->req.actual; + prefetchw(buf); + + if (unlikely(ep->num == 0 && ep->dev->ep0state != EP0_OUT)) + return -EL2HLT; + + dbuff = (ep->num == 1 || ep->num == 2); + do { + /* ack dataset irq matching the status we'll handle */ + if (ep->num != 0) + writel(~INT_EPxDATASET(ep->num), ®s->int_status); + + set = readl(®s->DataSet) & DATASET_AB(ep->num); + size = readl(®s->EPxSizeLA[ep->num]); + bufferspace = req->req.length - req->req.actual; + + /* usually do nothing without an OUT packet */ + if (likely(ep->num != 0 || bufferspace != 0)) { + if (unlikely(set == 0)) + break; + /* use ep1/ep2 double-buffering for OUT */ + if (!(size & PACKET_ACTIVE)) + size = readl(®s->EPxSizeLB[ep->num]); + if (!(size & PACKET_ACTIVE)) /* "can't happen" */ + break; + size &= DATASIZE; /* EPxSizeH == 0 */ + + /* ep0out no-out-data case for set_config, etc */ + } else + size = 0; + + /* read all bytes from this packet */ + req->req.actual += size; + is_short = (size < ep->ep.maxpacket); +#ifdef USB_TRACE + VDBG(ep->dev, "read %s %u bytes%s OUT req %p %u/%u\n", + ep->ep.name, size, is_short ? "/S" : "", + req, req->req.actual, req->req.length); +#endif + while (likely(size-- != 0)) { + u8 byte = (u8) readl(ep->reg_fifo); + + if (unlikely(bufferspace == 0)) { + /* this happens when the driver's buffer + * is smaller than what the host sent. + * discard the extra data in this packet. + */ + if (req->req.status != -EOVERFLOW) + DBG(ep->dev, "%s overflow %u\n", + ep->ep.name, size); + req->req.status = -EOVERFLOW; + } else { + *buf++ = byte; + bufferspace--; + } + } + + /* completion */ + if (unlikely(is_short || req->req.actual == req->req.length)) { + if (unlikely(ep->num == 0)) { + /* non-control endpoints now usable? */ + if (ep->dev->req_config) + writel(ep->dev->configured + ? USBSTATE_CONFIGURED + : 0, + ®s->UsbState); + /* ep0out status stage */ + writel(~(1<<0), ®s->EOP); + ep->stopped = 1; + ep->dev->ep0state = EP0_STATUS; + } + done(ep, req, 0); + + /* empty the second buffer asap */ + if (dbuff && !list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, + struct goku_request, queue); + goto top; + } + return 1; + } + } while (dbuff); + return 0; +} + +static inline void +pio_irq_enable(struct goku_udc *dev, + struct goku_udc_regs __iomem *regs, int epnum) +{ + dev->int_enable |= INT_EPxDATASET (epnum); + writel(dev->int_enable, ®s->int_enable); + /* write may still be posted */ +} + +static inline void +pio_irq_disable(struct goku_udc *dev, + struct goku_udc_regs __iomem *regs, int epnum) +{ + dev->int_enable &= ~INT_EPxDATASET (epnum); + writel(dev->int_enable, ®s->int_enable); + /* write may still be posted */ +} + +static inline void +pio_advance(struct goku_ep *ep) +{ + struct goku_request *req; + + if (unlikely(list_empty (&ep->queue))) + return; + req = list_entry(ep->queue.next, struct goku_request, queue); + (ep->is_in ? write_fifo : read_fifo)(ep, req); +} + + +/*-------------------------------------------------------------------------*/ + +// return: 0 = q running, 1 = q stopped, negative = errno +static int start_dma(struct goku_ep *ep, struct goku_request *req) +{ + struct goku_udc_regs __iomem *regs = ep->dev->regs; + u32 master; + u32 start = req->req.dma; + u32 end = start + req->req.length - 1; + + master = readl(®s->dma_master) & MST_RW_BITS; + + /* re-init the bits affecting IN dma; careful with zlps */ + if (likely(ep->is_in)) { + if (unlikely(master & MST_RD_ENA)) { + DBG (ep->dev, "start, IN active dma %03x!!\n", + master); +// return -EL2HLT; + } + writel(end, ®s->in_dma_end); + writel(start, ®s->in_dma_start); + + master &= ~MST_R_BITS; + if (unlikely(req->req.length == 0)) + master |= MST_RD_ENA | MST_RD_EOPB; + else if ((req->req.length % ep->ep.maxpacket) != 0 + || req->req.zero) + master |= MST_RD_ENA | MST_EOPB_ENA; + else + master |= MST_RD_ENA | MST_EOPB_DIS; + + ep->dev->int_enable |= INT_MSTRDEND; + + /* Goku DMA-OUT merges short packets, which plays poorly with + * protocols where short packets mark the transfer boundaries. + * The chip supports a nonstandard policy with INT_MSTWRTMOUT, + * ending transfers after 3 SOFs; we don't turn it on. + */ + } else { + if (unlikely(master & MST_WR_ENA)) { + DBG (ep->dev, "start, OUT active dma %03x!!\n", + master); +// return -EL2HLT; + } + writel(end, ®s->out_dma_end); + writel(start, ®s->out_dma_start); + + master &= ~MST_W_BITS; + master |= MST_WR_ENA | MST_TIMEOUT_DIS; + + ep->dev->int_enable |= INT_MSTWREND|INT_MSTWRTMOUT; + } + + writel(master, ®s->dma_master); + writel(ep->dev->int_enable, ®s->int_enable); + return 0; +} + +static void dma_advance(struct goku_udc *dev, struct goku_ep *ep) +{ + struct goku_request *req; + struct goku_udc_regs __iomem *regs = ep->dev->regs; + u32 master; + + master = readl(®s->dma_master); + + if (unlikely(list_empty(&ep->queue))) { +stop: + if (ep->is_in) + dev->int_enable &= ~INT_MSTRDEND; + else + dev->int_enable &= ~(INT_MSTWREND|INT_MSTWRTMOUT); + writel(dev->int_enable, ®s->int_enable); + return; + } + req = list_entry(ep->queue.next, struct goku_request, queue); + + /* normal hw dma completion (not abort) */ + if (likely(ep->is_in)) { + if (unlikely(master & MST_RD_ENA)) + return; + req->req.actual = readl(®s->in_dma_current); + } else { + if (unlikely(master & MST_WR_ENA)) + return; + + /* hardware merges short packets, and also hides packet + * overruns. a partial packet MAY be in the fifo here. + */ + req->req.actual = readl(®s->out_dma_current); + } + req->req.actual -= req->req.dma; + req->req.actual++; + +#ifdef USB_TRACE + VDBG(dev, "done %s %s dma, %u/%u bytes, req %p\n", + ep->ep.name, ep->is_in ? "IN" : "OUT", + req->req.actual, req->req.length, req); +#endif + done(ep, req, 0); + if (list_empty(&ep->queue)) + goto stop; + req = list_entry(ep->queue.next, struct goku_request, queue); + (void) start_dma(ep, req); +} + +static void abort_dma(struct goku_ep *ep, int status) +{ + struct goku_udc_regs __iomem *regs = ep->dev->regs; + struct goku_request *req; + u32 curr, master; + + /* NAK future host requests, hoping the implicit delay lets the + * dma engine finish reading (or writing) its latest packet and + * empty the dma buffer (up to 16 bytes). + * + * This avoids needing to clean up a partial packet in the fifo; + * we can't do that for IN without side effects to HALT and TOGGLE. + */ + command(regs, COMMAND_FIFO_DISABLE, ep->num); + req = list_entry(ep->queue.next, struct goku_request, queue); + master = readl(®s->dma_master) & MST_RW_BITS; + + /* FIXME using these resets isn't usably documented. this may + * not work unless it's followed by disabling the endpoint. + * + * FIXME the OUT reset path doesn't even behave consistently. + */ + if (ep->is_in) { + if (unlikely((readl(®s->dma_master) & MST_RD_ENA) == 0)) + goto finished; + curr = readl(®s->in_dma_current); + + writel(curr, ®s->in_dma_end); + writel(curr, ®s->in_dma_start); + + master &= ~MST_R_BITS; + master |= MST_RD_RESET; + writel(master, ®s->dma_master); + + if (readl(®s->dma_master) & MST_RD_ENA) + DBG(ep->dev, "IN dma active after reset!\n"); + + } else { + if (unlikely((readl(®s->dma_master) & MST_WR_ENA) == 0)) + goto finished; + curr = readl(®s->out_dma_current); + + writel(curr, ®s->out_dma_end); + writel(curr, ®s->out_dma_start); + + master &= ~MST_W_BITS; + master |= MST_WR_RESET; + writel(master, ®s->dma_master); + + if (readl(®s->dma_master) & MST_WR_ENA) + DBG(ep->dev, "OUT dma active after reset!\n"); + } + req->req.actual = (curr - req->req.dma) + 1; + req->req.status = status; + + VDBG(ep->dev, "%s %s %s %d/%d\n", __func__, ep->ep.name, + ep->is_in ? "IN" : "OUT", + req->req.actual, req->req.length); + + command(regs, COMMAND_FIFO_ENABLE, ep->num); + + return; + +finished: + /* dma already completed; no abort needed */ + command(regs, COMMAND_FIFO_ENABLE, ep->num); + req->req.actual = req->req.length; + req->req.status = 0; +} + +/*-------------------------------------------------------------------------*/ + +static int +goku_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) +{ + struct goku_request *req; + struct goku_ep *ep; + struct goku_udc *dev; + unsigned long flags; + int status; + + /* always require a cpu-view buffer so pio works */ + req = container_of(_req, struct goku_request, req); + if (unlikely(!_req || !_req->complete + || !_req->buf || !list_empty(&req->queue))) + return -EINVAL; + ep = container_of(_ep, struct goku_ep, ep); + if (unlikely(!_ep || (!ep->ep.desc && ep->num != 0))) + return -EINVAL; + dev = ep->dev; + if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) + return -ESHUTDOWN; + + /* can't touch registers when suspended */ + if (dev->ep0state == EP0_SUSPEND) + return -EBUSY; + + /* set up dma mapping in case the caller didn't */ + if (ep->dma) { + status = usb_gadget_map_request(&dev->gadget, &req->req, + ep->is_in); + if (status) + return status; + } + +#ifdef USB_TRACE + VDBG(dev, "%s queue req %p, len %u buf %p\n", + _ep->name, _req, _req->length, _req->buf); +#endif + + spin_lock_irqsave(&dev->lock, flags); + + _req->status = -EINPROGRESS; + _req->actual = 0; + + /* for ep0 IN without premature status, zlp is required and + * writing EOP starts the status stage (OUT). + */ + if (unlikely(ep->num == 0 && ep->is_in)) + _req->zero = 1; + + /* kickstart this i/o queue? */ + status = 0; + if (list_empty(&ep->queue) && likely(!ep->stopped)) { + /* dma: done after dma completion IRQ (or error) + * pio: done after last fifo operation + */ + if (ep->dma) + status = start_dma(ep, req); + else + status = (ep->is_in ? write_fifo : read_fifo)(ep, req); + + if (unlikely(status != 0)) { + if (status > 0) + status = 0; + req = NULL; + } + + } /* else pio or dma irq handler advances the queue. */ + + if (likely(req != NULL)) + list_add_tail(&req->queue, &ep->queue); + + if (likely(!list_empty(&ep->queue)) + && likely(ep->num != 0) + && !ep->dma + && !(dev->int_enable & INT_EPxDATASET (ep->num))) + pio_irq_enable(dev, dev->regs, ep->num); + + spin_unlock_irqrestore(&dev->lock, flags); + + /* pci writes may still be posted */ + return status; +} + +/* dequeue ALL requests */ +static void nuke(struct goku_ep *ep, int status) +{ + struct goku_request *req; + + ep->stopped = 1; + if (list_empty(&ep->queue)) + return; + if (ep->dma) + abort_dma(ep, status); + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct goku_request, queue); + done(ep, req, status); + } +} + +/* dequeue JUST ONE request */ +static int goku_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct goku_request *req = NULL, *iter; + struct goku_ep *ep; + struct goku_udc *dev; + unsigned long flags; + + ep = container_of(_ep, struct goku_ep, ep); + if (!_ep || !_req || (!ep->ep.desc && ep->num != 0)) + return -EINVAL; + dev = ep->dev; + if (!dev->driver) + return -ESHUTDOWN; + + /* we can't touch (dma) registers when suspended */ + if (dev->ep0state == EP0_SUSPEND) + return -EBUSY; + + VDBG(dev, "%s %s %s %s %p\n", __func__, _ep->name, + ep->is_in ? "IN" : "OUT", + ep->dma ? "dma" : "pio", + _req); + + spin_lock_irqsave(&dev->lock, flags); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry(iter, &ep->queue, queue) { + if (&iter->req != _req) + continue; + req = iter; + break; + } + if (!req) { + spin_unlock_irqrestore (&dev->lock, flags); + return -EINVAL; + } + + if (ep->dma && ep->queue.next == &req->queue && !ep->stopped) { + abort_dma(ep, -ECONNRESET); + done(ep, req, -ECONNRESET); + dma_advance(dev, ep); + } else if (!list_empty(&req->queue)) + done(ep, req, -ECONNRESET); + else + req = NULL; + spin_unlock_irqrestore(&dev->lock, flags); + + return req ? 0 : -EOPNOTSUPP; +} + +/*-------------------------------------------------------------------------*/ + +static void goku_clear_halt(struct goku_ep *ep) +{ + // assert (ep->num !=0) + VDBG(ep->dev, "%s clear halt\n", ep->ep.name); + command(ep->dev->regs, COMMAND_SETDATA0, ep->num); + command(ep->dev->regs, COMMAND_STALL_CLEAR, ep->num); + if (ep->stopped) { + ep->stopped = 0; + if (ep->dma) { + struct goku_request *req; + + if (list_empty(&ep->queue)) + return; + req = list_entry(ep->queue.next, struct goku_request, + queue); + (void) start_dma(ep, req); + } else + pio_advance(ep); + } +} + +static int goku_set_halt(struct usb_ep *_ep, int value) +{ + struct goku_ep *ep; + unsigned long flags; + int retval = 0; + + if (!_ep) + return -ENODEV; + ep = container_of (_ep, struct goku_ep, ep); + + if (ep->num == 0) { + if (value) { + ep->dev->ep0state = EP0_STALL; + ep->dev->ep[0].stopped = 1; + } else + return -EINVAL; + + /* don't change EPxSTATUS_EP_INVALID to READY */ + } else if (!ep->ep.desc) { + DBG(ep->dev, "%s %s inactive?\n", __func__, ep->ep.name); + return -EINVAL; + } + + spin_lock_irqsave(&ep->dev->lock, flags); + if (!list_empty(&ep->queue)) + retval = -EAGAIN; + else if (ep->is_in && value + /* data in (either) packet buffer? */ + && (readl(&ep->dev->regs->DataSet) + & DATASET_AB(ep->num))) + retval = -EAGAIN; + else if (!value) + goku_clear_halt(ep); + else { + ep->stopped = 1; + VDBG(ep->dev, "%s set halt\n", ep->ep.name); + command(ep->dev->regs, COMMAND_STALL, ep->num); + readl(ep->reg_status); + } + spin_unlock_irqrestore(&ep->dev->lock, flags); + return retval; +} + +static int goku_fifo_status(struct usb_ep *_ep) +{ + struct goku_ep *ep; + struct goku_udc_regs __iomem *regs; + u32 size; + + if (!_ep) + return -ENODEV; + ep = container_of(_ep, struct goku_ep, ep); + + /* size is only reported sanely for OUT */ + if (ep->is_in) + return -EOPNOTSUPP; + + /* ignores 16-byte dma buffer; SizeH == 0 */ + regs = ep->dev->regs; + size = readl(®s->EPxSizeLA[ep->num]) & DATASIZE; + size += readl(®s->EPxSizeLB[ep->num]) & DATASIZE; + VDBG(ep->dev, "%s %s %u\n", __func__, ep->ep.name, size); + return size; +} + +static void goku_fifo_flush(struct usb_ep *_ep) +{ + struct goku_ep *ep; + struct goku_udc_regs __iomem *regs; + u32 size; + + if (!_ep) + return; + ep = container_of(_ep, struct goku_ep, ep); + VDBG(ep->dev, "%s %s\n", __func__, ep->ep.name); + + /* don't change EPxSTATUS_EP_INVALID to READY */ + if (!ep->ep.desc && ep->num != 0) { + DBG(ep->dev, "%s %s inactive?\n", __func__, ep->ep.name); + return; + } + + regs = ep->dev->regs; + size = readl(®s->EPxSizeLA[ep->num]); + size &= DATASIZE; + + /* Non-desirable behavior: FIFO_CLEAR also clears the + * endpoint halt feature. For OUT, we _could_ just read + * the bytes out (PIO, if !ep->dma); for in, no choice. + */ + if (size) + command(regs, COMMAND_FIFO_CLEAR, ep->num); +} + +static const struct usb_ep_ops goku_ep_ops = { + .enable = goku_ep_enable, + .disable = goku_ep_disable, + + .alloc_request = goku_alloc_request, + .free_request = goku_free_request, + + .queue = goku_queue, + .dequeue = goku_dequeue, + + .set_halt = goku_set_halt, + .fifo_status = goku_fifo_status, + .fifo_flush = goku_fifo_flush, +}; + +/*-------------------------------------------------------------------------*/ + +static int goku_get_frame(struct usb_gadget *_gadget) +{ + return -EOPNOTSUPP; +} + +static struct usb_ep *goku_match_ep(struct usb_gadget *g, + struct usb_endpoint_descriptor *desc, + struct usb_ss_ep_comp_descriptor *ep_comp) +{ + struct goku_udc *dev = to_goku_udc(g); + struct usb_ep *ep; + + switch (usb_endpoint_type(desc)) { + case USB_ENDPOINT_XFER_INT: + /* single buffering is enough */ + ep = &dev->ep[3].ep; + if (usb_gadget_ep_match_desc(g, ep, desc, ep_comp)) + return ep; + break; + case USB_ENDPOINT_XFER_BULK: + if (usb_endpoint_dir_in(desc)) { + /* DMA may be available */ + ep = &dev->ep[2].ep; + if (usb_gadget_ep_match_desc(g, ep, desc, ep_comp)) + return ep; + } + break; + default: + /* nothing */ ; + } + + return NULL; +} + +static int goku_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver); +static int goku_udc_stop(struct usb_gadget *g); + +static const struct usb_gadget_ops goku_ops = { + .get_frame = goku_get_frame, + .udc_start = goku_udc_start, + .udc_stop = goku_udc_stop, + .match_ep = goku_match_ep, + // no remote wakeup + // not selfpowered +}; + +/*-------------------------------------------------------------------------*/ + +static inline const char *dmastr(void) +{ + if (use_dma == 0) + return "(dma disabled)"; + else if (use_dma == 2) + return "(dma IN and OUT)"; + else + return "(dma IN)"; +} + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + +static const char proc_node_name [] = "driver/udc"; + +#define FOURBITS "%s%s%s%s" +#define EIGHTBITS FOURBITS FOURBITS + +static void dump_intmask(struct seq_file *m, const char *label, u32 mask) +{ + /* int_status is the same format ... */ + seq_printf(m, "%s %05X =" FOURBITS EIGHTBITS EIGHTBITS "\n", + label, mask, + (mask & INT_PWRDETECT) ? " power" : "", + (mask & INT_SYSERROR) ? " sys" : "", + (mask & INT_MSTRDEND) ? " in-dma" : "", + (mask & INT_MSTWRTMOUT) ? " wrtmo" : "", + + (mask & INT_MSTWREND) ? " out-dma" : "", + (mask & INT_MSTWRSET) ? " wrset" : "", + (mask & INT_ERR) ? " err" : "", + (mask & INT_SOF) ? " sof" : "", + + (mask & INT_EP3NAK) ? " ep3nak" : "", + (mask & INT_EP2NAK) ? " ep2nak" : "", + (mask & INT_EP1NAK) ? " ep1nak" : "", + (mask & INT_EP3DATASET) ? " ep3" : "", + + (mask & INT_EP2DATASET) ? " ep2" : "", + (mask & INT_EP1DATASET) ? " ep1" : "", + (mask & INT_STATUSNAK) ? " ep0snak" : "", + (mask & INT_STATUS) ? " ep0status" : "", + + (mask & INT_SETUP) ? " setup" : "", + (mask & INT_ENDPOINT0) ? " ep0" : "", + (mask & INT_USBRESET) ? " reset" : "", + (mask & INT_SUSPEND) ? " suspend" : ""); +} + +static const char *udc_ep_state(enum ep0state state) +{ + switch (state) { + case EP0_DISCONNECT: + return "ep0_disconnect"; + case EP0_IDLE: + return "ep0_idle"; + case EP0_IN: + return "ep0_in"; + case EP0_OUT: + return "ep0_out"; + case EP0_STATUS: + return "ep0_status"; + case EP0_STALL: + return "ep0_stall"; + case EP0_SUSPEND: + return "ep0_suspend"; + } + + return "ep0_?"; +} + +static const char *udc_ep_status(u32 status) +{ + switch (status & EPxSTATUS_EP_MASK) { + case EPxSTATUS_EP_READY: + return "ready"; + case EPxSTATUS_EP_DATAIN: + return "packet"; + case EPxSTATUS_EP_FULL: + return "full"; + case EPxSTATUS_EP_TX_ERR: /* host will retry */ + return "tx_err"; + case EPxSTATUS_EP_RX_ERR: + return "rx_err"; + case EPxSTATUS_EP_BUSY: /* ep0 only */ + return "busy"; + case EPxSTATUS_EP_STALL: + return "stall"; + case EPxSTATUS_EP_INVALID: /* these "can't happen" */ + return "invalid"; + } + + return "?"; +} + +static int udc_proc_read(struct seq_file *m, void *v) +{ + struct goku_udc *dev = m->private; + struct goku_udc_regs __iomem *regs = dev->regs; + unsigned long flags; + int i, is_usb_connected; + u32 tmp; + + local_irq_save(flags); + + /* basic device status */ + tmp = readl(®s->power_detect); + is_usb_connected = tmp & PW_DETECT; + seq_printf(m, + "%s - %s\n" + "%s version: %s %s\n" + "Gadget driver: %s\n" + "Host %s, %s\n" + "\n", + pci_name(dev->pdev), driver_desc, + driver_name, DRIVER_VERSION, dmastr(), + dev->driver ? dev->driver->driver.name : "(none)", + is_usb_connected + ? ((tmp & PW_PULLUP) ? "full speed" : "powered") + : "disconnected", + udc_ep_state(dev->ep0state)); + + dump_intmask(m, "int_status", readl(®s->int_status)); + dump_intmask(m, "int_enable", readl(®s->int_enable)); + + if (!is_usb_connected || !dev->driver || (tmp & PW_PULLUP) == 0) + goto done; + + /* registers for (active) device and ep0 */ + seq_printf(m, "\nirqs %lu\ndataset %02x single.bcs %02x.%02x state %x addr %u\n", + dev->irqs, readl(®s->DataSet), + readl(®s->EPxSingle), readl(®s->EPxBCS), + readl(®s->UsbState), + readl(®s->address)); + if (seq_has_overflowed(m)) + goto done; + + tmp = readl(®s->dma_master); + seq_printf(m, "dma %03X =" EIGHTBITS "%s %s\n", + tmp, + (tmp & MST_EOPB_DIS) ? " eopb-" : "", + (tmp & MST_EOPB_ENA) ? " eopb+" : "", + (tmp & MST_TIMEOUT_DIS) ? " tmo-" : "", + (tmp & MST_TIMEOUT_ENA) ? " tmo+" : "", + + (tmp & MST_RD_EOPB) ? " eopb" : "", + (tmp & MST_RD_RESET) ? " in_reset" : "", + (tmp & MST_WR_RESET) ? " out_reset" : "", + (tmp & MST_RD_ENA) ? " IN" : "", + + (tmp & MST_WR_ENA) ? " OUT" : "", + (tmp & MST_CONNECTION) ? "ep1in/ep2out" : "ep1out/ep2in"); + if (seq_has_overflowed(m)) + goto done; + + /* dump endpoint queues */ + for (i = 0; i < 4; i++) { + struct goku_ep *ep = &dev->ep [i]; + struct goku_request *req; + + if (i && !ep->ep.desc) + continue; + + tmp = readl(ep->reg_status); + seq_printf(m, "%s %s max %u %s, irqs %lu, status %02x (%s) " FOURBITS "\n", + ep->ep.name, + ep->is_in ? "in" : "out", + ep->ep.maxpacket, + ep->dma ? "dma" : "pio", + ep->irqs, + tmp, udc_ep_status(tmp), + (tmp & EPxSTATUS_TOGGLE) ? "data1" : "data0", + (tmp & EPxSTATUS_SUSPEND) ? " suspend" : "", + (tmp & EPxSTATUS_FIFO_DISABLE) ? " disable" : "", + (tmp & EPxSTATUS_STAGE_ERROR) ? " ep0stat" : ""); + if (seq_has_overflowed(m)) + goto done; + + if (list_empty(&ep->queue)) { + seq_puts(m, "\t(nothing queued)\n"); + if (seq_has_overflowed(m)) + goto done; + continue; + } + list_for_each_entry(req, &ep->queue, queue) { + if (ep->dma && req->queue.prev == &ep->queue) { + if (i == UDC_MSTRD_ENDPOINT) + tmp = readl(®s->in_dma_current); + else + tmp = readl(®s->out_dma_current); + tmp -= req->req.dma; + tmp++; + } else + tmp = req->req.actual; + + seq_printf(m, "\treq %p len %u/%u buf %p\n", + &req->req, tmp, req->req.length, + req->req.buf); + if (seq_has_overflowed(m)) + goto done; + } + } + +done: + local_irq_restore(flags); + return 0; +} +#endif /* CONFIG_USB_GADGET_DEBUG_FILES */ + +/*-------------------------------------------------------------------------*/ + +static void udc_reinit (struct goku_udc *dev) +{ + static char *names [] = { "ep0", "ep1-bulk", "ep2-bulk", "ep3-bulk" }; + + unsigned i; + + INIT_LIST_HEAD (&dev->gadget.ep_list); + dev->gadget.ep0 = &dev->ep [0].ep; + dev->gadget.speed = USB_SPEED_UNKNOWN; + dev->ep0state = EP0_DISCONNECT; + dev->irqs = 0; + + for (i = 0; i < 4; i++) { + struct goku_ep *ep = &dev->ep[i]; + + ep->num = i; + ep->ep.name = names[i]; + ep->reg_fifo = &dev->regs->ep_fifo [i]; + ep->reg_status = &dev->regs->ep_status [i]; + ep->reg_mode = &dev->regs->ep_mode[i]; + + ep->ep.ops = &goku_ep_ops; + list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list); + ep->dev = dev; + INIT_LIST_HEAD (&ep->queue); + + ep_reset(NULL, ep); + + if (i == 0) + ep->ep.caps.type_control = true; + else + ep->ep.caps.type_bulk = true; + + ep->ep.caps.dir_in = true; + ep->ep.caps.dir_out = true; + } + + dev->ep[0].reg_mode = NULL; + usb_ep_set_maxpacket_limit(&dev->ep[0].ep, MAX_EP0_SIZE); + list_del_init (&dev->ep[0].ep.ep_list); +} + +static void udc_reset(struct goku_udc *dev) +{ + struct goku_udc_regs __iomem *regs = dev->regs; + + writel(0, ®s->power_detect); + writel(0, ®s->int_enable); + readl(®s->int_enable); + dev->int_enable = 0; + + /* deassert reset, leave USB D+ at hi-Z (no pullup) + * don't let INT_PWRDETECT sequence begin + */ + udelay(250); + writel(PW_RESETB, ®s->power_detect); + readl(®s->int_enable); +} + +static void ep0_start(struct goku_udc *dev) +{ + struct goku_udc_regs __iomem *regs = dev->regs; + unsigned i; + + VDBG(dev, "%s\n", __func__); + + udc_reset(dev); + udc_reinit (dev); + //writel(MST_EOPB_ENA | MST_TIMEOUT_ENA, ®s->dma_master); + + /* hw handles set_address, set_feature, get_status; maybe more */ + writel( G_REQMODE_SET_INTF | G_REQMODE_GET_INTF + | G_REQMODE_SET_CONF | G_REQMODE_GET_CONF + | G_REQMODE_GET_DESC + | G_REQMODE_CLEAR_FEAT + , ®s->reqmode); + + for (i = 0; i < 4; i++) + dev->ep[i].irqs = 0; + + /* can't modify descriptors after writing UsbReady */ + for (i = 0; i < DESC_LEN; i++) + writel(0, ®s->descriptors[i]); + writel(0, ®s->UsbReady); + + /* expect ep0 requests when the host drops reset */ + writel(PW_RESETB | PW_PULLUP, ®s->power_detect); + dev->int_enable = INT_DEVWIDE | INT_EP0; + writel(dev->int_enable, &dev->regs->int_enable); + readl(®s->int_enable); + dev->gadget.speed = USB_SPEED_FULL; + dev->ep0state = EP0_IDLE; +} + +static void udc_enable(struct goku_udc *dev) +{ + /* start enumeration now, or after power detect irq */ + if (readl(&dev->regs->power_detect) & PW_DETECT) + ep0_start(dev); + else { + DBG(dev, "%s\n", __func__); + dev->int_enable = INT_PWRDETECT; + writel(dev->int_enable, &dev->regs->int_enable); + } +} + +/*-------------------------------------------------------------------------*/ + +/* keeping it simple: + * - one bus driver, initted first; + * - one function driver, initted second + */ + +/* when a driver is successfully registered, it will receive + * control requests including set_configuration(), which enables + * non-control requests. then usb traffic follows until a + * disconnect is reported. then a host may connect again, or + * the driver might get unbound. + */ +static int goku_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) +{ + struct goku_udc *dev = to_goku_udc(g); + + /* hook up the driver */ + dev->driver = driver; + + /* + * then enable host detection and ep0; and we're ready + * for set_configuration as well as eventual disconnect. + */ + udc_enable(dev); + + return 0; +} + +static void stop_activity(struct goku_udc *dev) +{ + unsigned i; + + DBG (dev, "%s\n", __func__); + + /* disconnect gadget driver after quiesceing hw and the driver */ + udc_reset (dev); + for (i = 0; i < 4; i++) + nuke(&dev->ep [i], -ESHUTDOWN); + + if (dev->driver) + udc_enable(dev); +} + +static int goku_udc_stop(struct usb_gadget *g) +{ + struct goku_udc *dev = to_goku_udc(g); + unsigned long flags; + + spin_lock_irqsave(&dev->lock, flags); + dev->driver = NULL; + stop_activity(dev); + spin_unlock_irqrestore(&dev->lock, flags); + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static void ep0_setup(struct goku_udc *dev) +{ + struct goku_udc_regs __iomem *regs = dev->regs; + struct usb_ctrlrequest ctrl; + int tmp; + + /* read SETUP packet and enter DATA stage */ + ctrl.bRequestType = readl(®s->bRequestType); + ctrl.bRequest = readl(®s->bRequest); + ctrl.wValue = cpu_to_le16((readl(®s->wValueH) << 8) + | readl(®s->wValueL)); + ctrl.wIndex = cpu_to_le16((readl(®s->wIndexH) << 8) + | readl(®s->wIndexL)); + ctrl.wLength = cpu_to_le16((readl(®s->wLengthH) << 8) + | readl(®s->wLengthL)); + writel(0, ®s->SetupRecv); + + nuke(&dev->ep[0], 0); + dev->ep[0].stopped = 0; + if (likely(ctrl.bRequestType & USB_DIR_IN)) { + dev->ep[0].is_in = 1; + dev->ep0state = EP0_IN; + /* detect early status stages */ + writel(ICONTROL_STATUSNAK, &dev->regs->IntControl); + } else { + dev->ep[0].is_in = 0; + dev->ep0state = EP0_OUT; + + /* NOTE: CLEAR_FEATURE is done in software so that we can + * synchronize transfer restarts after bulk IN stalls. data + * won't even enter the fifo until the halt is cleared. + */ + switch (ctrl.bRequest) { + case USB_REQ_CLEAR_FEATURE: + switch (ctrl.bRequestType) { + case USB_RECIP_ENDPOINT: + tmp = le16_to_cpu(ctrl.wIndex) & 0x0f; + /* active endpoint */ + if (tmp > 3 || + (!dev->ep[tmp].ep.desc && tmp != 0)) + goto stall; + if (ctrl.wIndex & cpu_to_le16( + USB_DIR_IN)) { + if (!dev->ep[tmp].is_in) + goto stall; + } else { + if (dev->ep[tmp].is_in) + goto stall; + } + if (ctrl.wValue != cpu_to_le16( + USB_ENDPOINT_HALT)) + goto stall; + if (tmp) + goku_clear_halt(&dev->ep[tmp]); +succeed: + /* start ep0out status stage */ + writel(~(1<<0), ®s->EOP); + dev->ep[0].stopped = 1; + dev->ep0state = EP0_STATUS; + return; + case USB_RECIP_DEVICE: + /* device remote wakeup: always clear */ + if (ctrl.wValue != cpu_to_le16(1)) + goto stall; + VDBG(dev, "clear dev remote wakeup\n"); + goto succeed; + case USB_RECIP_INTERFACE: + goto stall; + default: /* pass to gadget driver */ + break; + } + break; + default: + break; + } + } + +#ifdef USB_TRACE + VDBG(dev, "SETUP %02x.%02x v%04x i%04x l%04x\n", + ctrl.bRequestType, ctrl.bRequest, + le16_to_cpu(ctrl.wValue), le16_to_cpu(ctrl.wIndex), + le16_to_cpu(ctrl.wLength)); +#endif + + /* hw wants to know when we're configured (or not) */ + dev->req_config = (ctrl.bRequest == USB_REQ_SET_CONFIGURATION + && ctrl.bRequestType == USB_RECIP_DEVICE); + if (unlikely(dev->req_config)) + dev->configured = (ctrl.wValue != cpu_to_le16(0)); + + /* delegate everything to the gadget driver. + * it may respond after this irq handler returns. + */ + spin_unlock (&dev->lock); + tmp = dev->driver->setup(&dev->gadget, &ctrl); + spin_lock (&dev->lock); + if (unlikely(tmp < 0)) { +stall: +#ifdef USB_TRACE + VDBG(dev, "req %02x.%02x protocol STALL; err %d\n", + ctrl.bRequestType, ctrl.bRequest, tmp); +#endif + command(regs, COMMAND_STALL, 0); + dev->ep[0].stopped = 1; + dev->ep0state = EP0_STALL; + } + + /* expect at least one data or status stage irq */ +} + +#define ACK(irqbit) { \ + stat &= ~irqbit; \ + writel(~irqbit, ®s->int_status); \ + handled = 1; \ + } + +static irqreturn_t goku_irq(int irq, void *_dev) +{ + struct goku_udc *dev = _dev; + struct goku_udc_regs __iomem *regs = dev->regs; + struct goku_ep *ep; + u32 stat, handled = 0; + unsigned i, rescans = 5; + + spin_lock(&dev->lock); + +rescan: + stat = readl(®s->int_status) & dev->int_enable; + if (!stat) + goto done; + dev->irqs++; + + /* device-wide irqs */ + if (unlikely(stat & INT_DEVWIDE)) { + if (stat & INT_SYSERROR) { + ERROR(dev, "system error\n"); + stop_activity(dev); + stat = 0; + handled = 1; + // FIXME have a neater way to prevent re-enumeration + dev->driver = NULL; + goto done; + } + if (stat & INT_PWRDETECT) { + writel(~stat, ®s->int_status); + if (readl(&dev->regs->power_detect) & PW_DETECT) { + VDBG(dev, "connect\n"); + ep0_start(dev); + } else { + DBG(dev, "disconnect\n"); + if (dev->gadget.speed == USB_SPEED_FULL) + stop_activity(dev); + dev->ep0state = EP0_DISCONNECT; + dev->int_enable = INT_DEVWIDE; + writel(dev->int_enable, &dev->regs->int_enable); + } + stat = 0; + handled = 1; + goto done; + } + if (stat & INT_SUSPEND) { + ACK(INT_SUSPEND); + if (readl(®s->ep_status[0]) & EPxSTATUS_SUSPEND) { + switch (dev->ep0state) { + case EP0_DISCONNECT: + case EP0_SUSPEND: + goto pm_next; + default: + break; + } + DBG(dev, "USB suspend\n"); + dev->ep0state = EP0_SUSPEND; + if (dev->gadget.speed != USB_SPEED_UNKNOWN + && dev->driver + && dev->driver->suspend) { + spin_unlock(&dev->lock); + dev->driver->suspend(&dev->gadget); + spin_lock(&dev->lock); + } + } else { + if (dev->ep0state != EP0_SUSPEND) { + DBG(dev, "bogus USB resume %d\n", + dev->ep0state); + goto pm_next; + } + DBG(dev, "USB resume\n"); + dev->ep0state = EP0_IDLE; + if (dev->gadget.speed != USB_SPEED_UNKNOWN + && dev->driver + && dev->driver->resume) { + spin_unlock(&dev->lock); + dev->driver->resume(&dev->gadget); + spin_lock(&dev->lock); + } + } + } +pm_next: + if (stat & INT_USBRESET) { /* hub reset done */ + ACK(INT_USBRESET); + INFO(dev, "USB reset done, gadget %s\n", + dev->driver->driver.name); + } + // and INT_ERR on some endpoint's crc/bitstuff/... problem + } + + /* progress ep0 setup, data, or status stages. + * no transition {EP0_STATUS, EP0_STALL} --> EP0_IDLE; saves irqs + */ + if (stat & INT_SETUP) { + ACK(INT_SETUP); + dev->ep[0].irqs++; + ep0_setup(dev); + } + if (stat & INT_STATUSNAK) { + ACK(INT_STATUSNAK|INT_ENDPOINT0); + if (dev->ep0state == EP0_IN) { + ep = &dev->ep[0]; + ep->irqs++; + nuke(ep, 0); + writel(~(1<<0), ®s->EOP); + dev->ep0state = EP0_STATUS; + } + } + if (stat & INT_ENDPOINT0) { + ACK(INT_ENDPOINT0); + ep = &dev->ep[0]; + ep->irqs++; + pio_advance(ep); + } + + /* dma completion */ + if (stat & INT_MSTRDEND) { /* IN */ + ACK(INT_MSTRDEND); + ep = &dev->ep[UDC_MSTRD_ENDPOINT]; + ep->irqs++; + dma_advance(dev, ep); + } + if (stat & INT_MSTWREND) { /* OUT */ + ACK(INT_MSTWREND); + ep = &dev->ep[UDC_MSTWR_ENDPOINT]; + ep->irqs++; + dma_advance(dev, ep); + } + if (stat & INT_MSTWRTMOUT) { /* OUT */ + ACK(INT_MSTWRTMOUT); + ep = &dev->ep[UDC_MSTWR_ENDPOINT]; + ep->irqs++; + ERROR(dev, "%s write timeout ?\n", ep->ep.name); + // reset dma? then dma_advance() + } + + /* pio */ + for (i = 1; i < 4; i++) { + u32 tmp = INT_EPxDATASET(i); + + if (!(stat & tmp)) + continue; + ep = &dev->ep[i]; + pio_advance(ep); + if (list_empty (&ep->queue)) + pio_irq_disable(dev, regs, i); + stat &= ~tmp; + handled = 1; + ep->irqs++; + } + + if (rescans--) + goto rescan; + +done: + (void)readl(®s->int_enable); + spin_unlock(&dev->lock); + if (stat) + DBG(dev, "unhandled irq status: %05x (%05x, %05x)\n", stat, + readl(®s->int_status), dev->int_enable); + return IRQ_RETVAL(handled); +} + +#undef ACK + +/*-------------------------------------------------------------------------*/ + +static void gadget_release(struct device *_dev) +{ + struct goku_udc *dev = dev_get_drvdata(_dev); + + kfree(dev); +} + +/* tear down the binding between this driver and the pci device */ + +static void goku_remove(struct pci_dev *pdev) +{ + struct goku_udc *dev = pci_get_drvdata(pdev); + + DBG(dev, "%s\n", __func__); + + usb_del_gadget_udc(&dev->gadget); + + BUG_ON(dev->driver); + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + remove_proc_entry(proc_node_name, NULL); +#endif + if (dev->regs) + udc_reset(dev); + if (dev->got_irq) + free_irq(pdev->irq, dev); + if (dev->regs) + iounmap(dev->regs); + if (dev->got_region) + release_mem_region(pci_resource_start (pdev, 0), + pci_resource_len (pdev, 0)); + if (dev->enabled) + pci_disable_device(pdev); + + dev->regs = NULL; + + INFO(dev, "unbind\n"); +} + +/* wrap this driver around the specified pci device, but + * don't respond over USB until a gadget driver binds to us. + */ + +static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct goku_udc *dev = NULL; + unsigned long resource, len; + void __iomem *base = NULL; + int retval; + + if (!pdev->irq) { + printk(KERN_ERR "Check PCI %s IRQ setup!\n", pci_name(pdev)); + retval = -ENODEV; + goto err; + } + + /* alloc, and start init */ + dev = kzalloc (sizeof *dev, GFP_KERNEL); + if (!dev) { + retval = -ENOMEM; + goto err; + } + + pci_set_drvdata(pdev, dev); + spin_lock_init(&dev->lock); + dev->pdev = pdev; + dev->gadget.ops = &goku_ops; + dev->gadget.max_speed = USB_SPEED_FULL; + + /* the "gadget" abstracts/virtualizes the controller */ + dev->gadget.name = driver_name; + + /* now all the pci goodies ... */ + retval = pci_enable_device(pdev); + if (retval < 0) { + DBG(dev, "can't enable, %d\n", retval); + goto err; + } + dev->enabled = 1; + + resource = pci_resource_start(pdev, 0); + len = pci_resource_len(pdev, 0); + if (!request_mem_region(resource, len, driver_name)) { + DBG(dev, "controller already in use\n"); + retval = -EBUSY; + goto err; + } + dev->got_region = 1; + + base = ioremap(resource, len); + if (base == NULL) { + DBG(dev, "can't map memory\n"); + retval = -EFAULT; + goto err; + } + dev->regs = (struct goku_udc_regs __iomem *) base; + + INFO(dev, "%s\n", driver_desc); + INFO(dev, "version: " DRIVER_VERSION " %s\n", dmastr()); + INFO(dev, "irq %d, pci mem %p\n", pdev->irq, base); + + /* init to known state, then setup irqs */ + udc_reset(dev); + udc_reinit (dev); + if (request_irq(pdev->irq, goku_irq, IRQF_SHARED, + driver_name, dev) != 0) { + DBG(dev, "request interrupt %d failed\n", pdev->irq); + retval = -EBUSY; + goto err; + } + dev->got_irq = 1; + if (use_dma) + pci_set_master(pdev); + + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + proc_create_single_data(proc_node_name, 0, NULL, udc_proc_read, dev); +#endif + + retval = usb_add_gadget_udc_release(&pdev->dev, &dev->gadget, + gadget_release); + if (retval) + goto err; + + return 0; + +err: + if (dev) + goku_remove (pdev); + /* gadget_release is not registered yet, kfree explicitly */ + kfree(dev); + return retval; +} + + +/*-------------------------------------------------------------------------*/ + +static const struct pci_device_id pci_ids[] = { { + .class = PCI_CLASS_SERIAL_USB_DEVICE, + .class_mask = ~0, + .vendor = 0x102f, /* Toshiba */ + .device = 0x0107, /* this UDC */ + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + +}, { /* end: all zeroes */ } +}; +MODULE_DEVICE_TABLE (pci, pci_ids); + +static struct pci_driver goku_pci_driver = { + .name = driver_name, + .id_table = pci_ids, + + .probe = goku_probe, + .remove = goku_remove, + + /* FIXME add power management support */ +}; + +module_pci_driver(goku_pci_driver); diff --git a/drivers/usb/gadget/udc/goku_udc.h b/drivers/usb/gadget/udc/goku_udc.h new file mode 100644 index 000000000..70023d401 --- /dev/null +++ b/drivers/usb/gadget/udc/goku_udc.h @@ -0,0 +1,289 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Toshiba TC86C001 ("Goku-S") USB Device Controller driver + * + * Copyright (C) 2000-2002 Lineo + * by Stuart Lynne, Tom Rushworth, and Bruce Balden + * Copyright (C) 2002 Toshiba Corporation + * Copyright (C) 2003 MontaVista Software (source@mvista.com) + */ + +/* + * PCI BAR 0 points to these registers. + */ +struct goku_udc_regs { + /* irq management */ + u32 int_status; /* 0x000 */ + u32 int_enable; +#define INT_SUSPEND 0x00001 /* or resume */ +#define INT_USBRESET 0x00002 +#define INT_ENDPOINT0 0x00004 +#define INT_SETUP 0x00008 +#define INT_STATUS 0x00010 +#define INT_STATUSNAK 0x00020 +#define INT_EPxDATASET(n) (0x00020 << (n)) /* 0 < n < 4 */ +# define INT_EP1DATASET 0x00040 +# define INT_EP2DATASET 0x00080 +# define INT_EP3DATASET 0x00100 +#define INT_EPnNAK(n) (0x00100 << (n)) /* 0 < n < 4 */ +# define INT_EP1NAK 0x00200 +# define INT_EP2NAK 0x00400 +# define INT_EP3NAK 0x00800 +#define INT_SOF 0x01000 +#define INT_ERR 0x02000 +#define INT_MSTWRSET 0x04000 +#define INT_MSTWREND 0x08000 +#define INT_MSTWRTMOUT 0x10000 +#define INT_MSTRDEND 0x20000 +#define INT_SYSERROR 0x40000 +#define INT_PWRDETECT 0x80000 + +#define INT_DEVWIDE \ + (INT_PWRDETECT|INT_SYSERROR/*|INT_ERR*/|INT_USBRESET|INT_SUSPEND) +#define INT_EP0 \ + (INT_SETUP|INT_ENDPOINT0/*|INT_STATUS*/|INT_STATUSNAK) + + u32 dma_master; +#define MST_EOPB_DIS 0x0800 +#define MST_EOPB_ENA 0x0400 +#define MST_TIMEOUT_DIS 0x0200 +#define MST_TIMEOUT_ENA 0x0100 +#define MST_RD_EOPB 0x0080 /* write-only */ +#define MST_RD_RESET 0x0040 +#define MST_WR_RESET 0x0020 +#define MST_RD_ENA 0x0004 /* 1:start, 0:ignore */ +#define MST_WR_ENA 0x0002 /* 1:start, 0:ignore */ +#define MST_CONNECTION 0x0001 /* 0 for ep1out/ep2in */ + +#define MST_R_BITS (MST_EOPB_DIS|MST_EOPB_ENA \ + |MST_RD_ENA|MST_RD_RESET) +#define MST_W_BITS (MST_TIMEOUT_DIS|MST_TIMEOUT_ENA \ + |MST_WR_ENA|MST_WR_RESET) +#define MST_RW_BITS (MST_R_BITS|MST_W_BITS \ + |MST_CONNECTION) + +/* these values assume (dma_master & MST_CONNECTION) == 0 */ +#define UDC_MSTWR_ENDPOINT 1 +#define UDC_MSTRD_ENDPOINT 2 + + /* dma master write */ + u32 out_dma_start; + u32 out_dma_end; + u32 out_dma_current; + + /* dma master read */ + u32 in_dma_start; + u32 in_dma_end; + u32 in_dma_current; + + u32 power_detect; +#define PW_DETECT 0x04 +#define PW_RESETB 0x02 +#define PW_PULLUP 0x01 + + u8 _reserved0 [0x1d8]; + + /* endpoint registers */ + u32 ep_fifo [4]; /* 0x200 */ + u8 _reserved1 [0x10]; + u32 ep_mode [4]; /* only 1-3 valid */ + u8 _reserved2 [0x10]; + + u32 ep_status [4]; +#define EPxSTATUS_TOGGLE 0x40 +#define EPxSTATUS_SUSPEND 0x20 +#define EPxSTATUS_EP_MASK (0x07<<2) +# define EPxSTATUS_EP_READY (0<<2) +# define EPxSTATUS_EP_DATAIN (1<<2) +# define EPxSTATUS_EP_FULL (2<<2) +# define EPxSTATUS_EP_TX_ERR (3<<2) +# define EPxSTATUS_EP_RX_ERR (4<<2) +# define EPxSTATUS_EP_BUSY (5<<2) +# define EPxSTATUS_EP_STALL (6<<2) +# define EPxSTATUS_EP_INVALID (7<<2) +#define EPxSTATUS_FIFO_DISABLE 0x02 +#define EPxSTATUS_STAGE_ERROR 0x01 + + u8 _reserved3 [0x10]; + u32 EPxSizeLA[4]; +#define PACKET_ACTIVE (1<<7) +#define DATASIZE 0x7f + u8 _reserved3a [0x10]; + u32 EPxSizeLB[4]; /* only 1,2 valid */ + u8 _reserved3b [0x10]; + u32 EPxSizeHA[4]; /* only 1-3 valid */ + u8 _reserved3c [0x10]; + u32 EPxSizeHB[4]; /* only 1,2 valid */ + u8 _reserved4[0x30]; + + /* SETUP packet contents */ + u32 bRequestType; /* 0x300 */ + u32 bRequest; + u32 wValueL; + u32 wValueH; + u32 wIndexL; + u32 wIndexH; + u32 wLengthL; + u32 wLengthH; + + /* command interaction/handshaking */ + u32 SetupRecv; /* 0x320 */ + u32 CurrConfig; + u32 StdRequest; + u32 Request; + u32 DataSet; +#define DATASET_A(epnum) (1<<(2*(epnum))) +#define DATASET_B(epnum) (2<<(2*(epnum))) +#define DATASET_AB(epnum) (3<<(2*(epnum))) + u8 _reserved5[4]; + + u32 UsbState; +#define USBSTATE_CONFIGURED 0x04 +#define USBSTATE_ADDRESSED 0x02 +#define USBSTATE_DEFAULT 0x01 + + u32 EOP; + + u32 Command; /* 0x340 */ +#define COMMAND_SETDATA0 2 +#define COMMAND_RESET 3 +#define COMMAND_STALL 4 +#define COMMAND_INVALID 5 +#define COMMAND_FIFO_DISABLE 7 +#define COMMAND_FIFO_ENABLE 8 +#define COMMAND_INIT_DESCRIPTOR 9 +#define COMMAND_FIFO_CLEAR 10 /* also stall */ +#define COMMAND_STALL_CLEAR 11 +#define COMMAND_EP(n) ((n) << 4) + + u32 EPxSingle; + u8 _reserved6[4]; + u32 EPxBCS; + u8 _reserved7[8]; + u32 IntControl; +#define ICONTROL_STATUSNAK 1 + u8 _reserved8[4]; + + u32 reqmode; // 0x360 standard request mode, low 8 bits +#define G_REQMODE_SET_INTF (1<<7) +#define G_REQMODE_GET_INTF (1<<6) +#define G_REQMODE_SET_CONF (1<<5) +#define G_REQMODE_GET_CONF (1<<4) +#define G_REQMODE_GET_DESC (1<<3) +#define G_REQMODE_SET_FEAT (1<<2) +#define G_REQMODE_CLEAR_FEAT (1<<1) +#define G_REQMODE_GET_STATUS (1<<0) + + u32 ReqMode; + u8 _reserved9[0x18]; + u32 PortStatus; /* 0x380 */ + u8 _reserved10[8]; + u32 address; + u32 buff_test; + u8 _reserved11[4]; + u32 UsbReady; + u8 _reserved12[4]; + u32 SetDescStall; /* 0x3a0 */ + u8 _reserved13[0x45c]; + + /* hardware could handle limited GET_DESCRIPTOR duties */ +#define DESC_LEN 0x80 + u32 descriptors[DESC_LEN]; /* 0x800 */ + u8 _reserved14[0x600]; + +} __attribute__ ((packed)); + +#define MAX_FIFO_SIZE 64 +#define MAX_EP0_SIZE 8 /* ep0 fifo is bigger, though */ + + +/*-------------------------------------------------------------------------*/ + +/* DRIVER DATA STRUCTURES and UTILITIES */ + +struct goku_ep { + struct usb_ep ep; + struct goku_udc *dev; + unsigned long irqs; + + unsigned num:8, + dma:1, + is_in:1, + stopped:1; + + /* analogous to a host-side qh */ + struct list_head queue; + + u32 __iomem *reg_fifo; + u32 __iomem *reg_mode; + u32 __iomem *reg_status; +}; + +struct goku_request { + struct usb_request req; + struct list_head queue; + + unsigned mapped:1; +}; + +enum ep0state { + EP0_DISCONNECT, /* no host */ + EP0_IDLE, /* between STATUS ack and SETUP report */ + EP0_IN, EP0_OUT, /* data stage */ + EP0_STATUS, /* status stage */ + EP0_STALL, /* data or status stages */ + EP0_SUSPEND, /* usb suspend */ +}; + +struct goku_udc { + /* each pci device provides one gadget, several endpoints */ + struct usb_gadget gadget; + spinlock_t lock; + struct goku_ep ep[4]; + struct usb_gadget_driver *driver; + + enum ep0state ep0state; + unsigned got_irq:1, + got_region:1, + req_config:1, + configured:1, + enabled:1; + + /* pci state used to access those endpoints */ + struct pci_dev *pdev; + struct goku_udc_regs __iomem *regs; + u32 int_enable; + + /* statistics... */ + unsigned long irqs; +}; +#define to_goku_udc(g) (container_of((g), struct goku_udc, gadget)) + +/*-------------------------------------------------------------------------*/ + +#define xprintk(dev,level,fmt,args...) \ + printk(level "%s %s: " fmt , driver_name , \ + pci_name(dev->pdev) , ## args) + +#ifdef DEBUG +#define DBG(dev,fmt,args...) \ + xprintk(dev , KERN_DEBUG , fmt , ## args) +#else +#define DBG(dev,fmt,args...) \ + do { } while (0) +#endif /* DEBUG */ + +#ifdef VERBOSE +#define VDBG DBG +#else +#define VDBG(dev,fmt,args...) \ + do { } while (0) +#endif /* VERBOSE */ + +#define ERROR(dev,fmt,args...) \ + xprintk(dev , KERN_ERR , fmt , ## args) +#define WARNING(dev,fmt,args...) \ + xprintk(dev , KERN_WARNING , fmt , ## args) +#define INFO(dev,fmt,args...) \ + xprintk(dev , KERN_INFO , fmt , ## args) + diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c new file mode 100644 index 000000000..097625599 --- /dev/null +++ b/drivers/usb/gadget/udc/gr_udc.c @@ -0,0 +1,2258 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * USB Peripheral Controller driver for Aeroflex Gaisler GRUSBDC. + * + * 2013 (c) Aeroflex Gaisler AB + * + * This driver supports GRUSBDC USB Device Controller cores available in the + * GRLIB VHDL IP core library. + * + * Full documentation of the GRUSBDC core can be found here: + * https://www.gaisler.com/products/grlib/grip.pdf + * + * Contributors: + * - Andreas Larsson <andreas@gaisler.com> + * - Marko Isomaki + */ + +/* + * A GRUSBDC core can have up to 16 IN endpoints and 16 OUT endpoints each + * individually configurable to any of the four USB transfer types. This driver + * only supports cores in DMA mode. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/usb.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/dma-mapping.h> +#include <linux/dmapool.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/of_platform.h> +#include <linux/of_irq.h> +#include <linux/of_address.h> + +#include <asm/byteorder.h> + +#include "gr_udc.h" + +#define DRIVER_NAME "gr_udc" +#define DRIVER_DESC "Aeroflex Gaisler GRUSBDC USB Peripheral Controller" + +static const char driver_name[] = DRIVER_NAME; + +#define gr_read32(x) (ioread32be((x))) +#define gr_write32(x, v) (iowrite32be((v), (x))) + +/* USB speed and corresponding string calculated from status register value */ +#define GR_SPEED(status) \ + ((status & GR_STATUS_SP) ? USB_SPEED_FULL : USB_SPEED_HIGH) +#define GR_SPEED_STR(status) usb_speed_string(GR_SPEED(status)) + +/* Size of hardware buffer calculated from epctrl register value */ +#define GR_BUFFER_SIZE(epctrl) \ + ((((epctrl) & GR_EPCTRL_BUFSZ_MASK) >> GR_EPCTRL_BUFSZ_POS) * \ + GR_EPCTRL_BUFSZ_SCALER) + +/* ---------------------------------------------------------------------- */ +/* Debug printout functionality */ + +static const char * const gr_modestring[] = {"control", "iso", "bulk", "int"}; + +static const char *gr_ep0state_string(enum gr_ep0state state) +{ + static const char *const names[] = { + [GR_EP0_DISCONNECT] = "disconnect", + [GR_EP0_SETUP] = "setup", + [GR_EP0_IDATA] = "idata", + [GR_EP0_ODATA] = "odata", + [GR_EP0_ISTATUS] = "istatus", + [GR_EP0_OSTATUS] = "ostatus", + [GR_EP0_STALL] = "stall", + [GR_EP0_SUSPEND] = "suspend", + }; + + if (state < 0 || state >= ARRAY_SIZE(names)) + return "UNKNOWN"; + + return names[state]; +} + +#ifdef VERBOSE_DEBUG + +static void gr_dbgprint_request(const char *str, struct gr_ep *ep, + struct gr_request *req) +{ + int buflen = ep->is_in ? req->req.length : req->req.actual; + int rowlen = 32; + int plen = min(rowlen, buflen); + + dev_dbg(ep->dev->dev, "%s: 0x%p, %d bytes data%s:\n", str, req, buflen, + (buflen > plen ? " (truncated)" : "")); + print_hex_dump_debug(" ", DUMP_PREFIX_NONE, + rowlen, 4, req->req.buf, plen, false); +} + +static void gr_dbgprint_devreq(struct gr_udc *dev, u8 type, u8 request, + u16 value, u16 index, u16 length) +{ + dev_vdbg(dev->dev, "REQ: %02x.%02x v%04x i%04x l%04x\n", + type, request, value, index, length); +} +#else /* !VERBOSE_DEBUG */ + +static void gr_dbgprint_request(const char *str, struct gr_ep *ep, + struct gr_request *req) {} + +static void gr_dbgprint_devreq(struct gr_udc *dev, u8 type, u8 request, + u16 value, u16 index, u16 length) {} + +#endif /* VERBOSE_DEBUG */ + +/* ---------------------------------------------------------------------- */ +/* Debugfs functionality */ + +#ifdef CONFIG_USB_GADGET_DEBUG_FS + +static void gr_seq_ep_show(struct seq_file *seq, struct gr_ep *ep) +{ + u32 epctrl = gr_read32(&ep->regs->epctrl); + u32 epstat = gr_read32(&ep->regs->epstat); + int mode = (epctrl & GR_EPCTRL_TT_MASK) >> GR_EPCTRL_TT_POS; + struct gr_request *req; + + seq_printf(seq, "%s:\n", ep->ep.name); + seq_printf(seq, " mode = %s\n", gr_modestring[mode]); + seq_printf(seq, " halted: %d\n", !!(epctrl & GR_EPCTRL_EH)); + seq_printf(seq, " disabled: %d\n", !!(epctrl & GR_EPCTRL_ED)); + seq_printf(seq, " valid: %d\n", !!(epctrl & GR_EPCTRL_EV)); + seq_printf(seq, " dma_start = %d\n", ep->dma_start); + seq_printf(seq, " stopped = %d\n", ep->stopped); + seq_printf(seq, " wedged = %d\n", ep->wedged); + seq_printf(seq, " callback = %d\n", ep->callback); + seq_printf(seq, " maxpacket = %d\n", ep->ep.maxpacket); + seq_printf(seq, " maxpacket_limit = %d\n", ep->ep.maxpacket_limit); + seq_printf(seq, " bytes_per_buffer = %d\n", ep->bytes_per_buffer); + if (mode == 1 || mode == 3) + seq_printf(seq, " nt = %d\n", + (epctrl & GR_EPCTRL_NT_MASK) >> GR_EPCTRL_NT_POS); + + seq_printf(seq, " Buffer 0: %s %s%d\n", + epstat & GR_EPSTAT_B0 ? "valid" : "invalid", + epstat & GR_EPSTAT_BS ? " " : "selected ", + (epstat & GR_EPSTAT_B0CNT_MASK) >> GR_EPSTAT_B0CNT_POS); + seq_printf(seq, " Buffer 1: %s %s%d\n", + epstat & GR_EPSTAT_B1 ? "valid" : "invalid", + epstat & GR_EPSTAT_BS ? "selected " : " ", + (epstat & GR_EPSTAT_B1CNT_MASK) >> GR_EPSTAT_B1CNT_POS); + + if (list_empty(&ep->queue)) { + seq_puts(seq, " Queue: empty\n\n"); + return; + } + + seq_puts(seq, " Queue:\n"); + list_for_each_entry(req, &ep->queue, queue) { + struct gr_dma_desc *desc; + struct gr_dma_desc *next; + + seq_printf(seq, " 0x%p: 0x%p %d %d\n", req, + &req->req.buf, req->req.actual, req->req.length); + + next = req->first_desc; + do { + desc = next; + next = desc->next_desc; + seq_printf(seq, " %c 0x%p (0x%08x): 0x%05x 0x%08x\n", + desc == req->curr_desc ? 'c' : ' ', + desc, desc->paddr, desc->ctrl, desc->data); + } while (desc != req->last_desc); + } + seq_puts(seq, "\n"); +} + +static int gr_dfs_show(struct seq_file *seq, void *v) +{ + struct gr_udc *dev = seq->private; + u32 control = gr_read32(&dev->regs->control); + u32 status = gr_read32(&dev->regs->status); + struct gr_ep *ep; + + seq_printf(seq, "usb state = %s\n", + usb_state_string(dev->gadget.state)); + seq_printf(seq, "address = %d\n", + (control & GR_CONTROL_UA_MASK) >> GR_CONTROL_UA_POS); + seq_printf(seq, "speed = %s\n", GR_SPEED_STR(status)); + seq_printf(seq, "ep0state = %s\n", gr_ep0state_string(dev->ep0state)); + seq_printf(seq, "irq_enabled = %d\n", dev->irq_enabled); + seq_printf(seq, "remote_wakeup = %d\n", dev->remote_wakeup); + seq_printf(seq, "test_mode = %d\n", dev->test_mode); + seq_puts(seq, "\n"); + + list_for_each_entry(ep, &dev->ep_list, ep_list) + gr_seq_ep_show(seq, ep); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(gr_dfs); + +static void gr_dfs_create(struct gr_udc *dev) +{ + const char *name = "gr_udc_state"; + struct dentry *root; + + root = debugfs_create_dir(dev_name(dev->dev), usb_debug_root); + debugfs_create_file(name, 0444, root, dev, &gr_dfs_fops); +} + +static void gr_dfs_delete(struct gr_udc *dev) +{ + debugfs_lookup_and_remove(dev_name(dev->dev), usb_debug_root); +} + +#else /* !CONFIG_USB_GADGET_DEBUG_FS */ + +static void gr_dfs_create(struct gr_udc *dev) {} +static void gr_dfs_delete(struct gr_udc *dev) {} + +#endif /* CONFIG_USB_GADGET_DEBUG_FS */ + +/* ---------------------------------------------------------------------- */ +/* DMA and request handling */ + +/* Allocates a new struct gr_dma_desc, sets paddr and zeroes the rest */ +static struct gr_dma_desc *gr_alloc_dma_desc(struct gr_ep *ep, gfp_t gfp_flags) +{ + dma_addr_t paddr; + struct gr_dma_desc *dma_desc; + + dma_desc = dma_pool_zalloc(ep->dev->desc_pool, gfp_flags, &paddr); + if (!dma_desc) { + dev_err(ep->dev->dev, "Could not allocate from DMA pool\n"); + return NULL; + } + + dma_desc->paddr = paddr; + + return dma_desc; +} + +static inline void gr_free_dma_desc(struct gr_udc *dev, + struct gr_dma_desc *desc) +{ + dma_pool_free(dev->desc_pool, desc, (dma_addr_t)desc->paddr); +} + +/* Frees the chain of struct gr_dma_desc for the given request */ +static void gr_free_dma_desc_chain(struct gr_udc *dev, struct gr_request *req) +{ + struct gr_dma_desc *desc; + struct gr_dma_desc *next; + + next = req->first_desc; + if (!next) + return; + + do { + desc = next; + next = desc->next_desc; + gr_free_dma_desc(dev, desc); + } while (desc != req->last_desc); + + req->first_desc = NULL; + req->curr_desc = NULL; + req->last_desc = NULL; +} + +static void gr_ep0_setup(struct gr_udc *dev, struct gr_request *req); + +/* + * Frees allocated resources and calls the appropriate completion function/setup + * package handler for a finished request. + * + * Must be called with dev->lock held and irqs disabled. + */ +static void gr_finish_request(struct gr_ep *ep, struct gr_request *req, + int status) + __releases(&dev->lock) + __acquires(&dev->lock) +{ + struct gr_udc *dev; + + list_del_init(&req->queue); + + if (likely(req->req.status == -EINPROGRESS)) + req->req.status = status; + else + status = req->req.status; + + dev = ep->dev; + usb_gadget_unmap_request(&dev->gadget, &req->req, ep->is_in); + gr_free_dma_desc_chain(dev, req); + + if (ep->is_in) { /* For OUT, req->req.actual gets updated bit by bit */ + req->req.actual = req->req.length; + } else if (req->oddlen && req->req.actual > req->evenlen) { + /* + * Copy to user buffer in this case where length was not evenly + * divisible by ep->ep.maxpacket and the last descriptor was + * actually used. + */ + char *buftail = ((char *)req->req.buf + req->evenlen); + + memcpy(buftail, ep->tailbuf, req->oddlen); + + if (req->req.actual > req->req.length) { + /* We got more data than was requested */ + dev_dbg(ep->dev->dev, "Overflow for ep %s\n", + ep->ep.name); + gr_dbgprint_request("OVFL", ep, req); + req->req.status = -EOVERFLOW; + } + } + + if (!status) { + if (ep->is_in) + gr_dbgprint_request("SENT", ep, req); + else + gr_dbgprint_request("RECV", ep, req); + } + + /* Prevent changes to ep->queue during callback */ + ep->callback = 1; + if (req == dev->ep0reqo && !status) { + if (req->setup) + gr_ep0_setup(dev, req); + else + dev_err(dev->dev, + "Unexpected non setup packet on ep0in\n"); + } else if (req->req.complete) { + spin_unlock(&dev->lock); + + usb_gadget_giveback_request(&ep->ep, &req->req); + + spin_lock(&dev->lock); + } + ep->callback = 0; +} + +static struct usb_request *gr_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) +{ + struct gr_request *req; + + req = kzalloc(sizeof(*req), gfp_flags); + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->queue); + + return &req->req; +} + +/* + * Starts DMA for endpoint ep if there are requests in the queue. + * + * Must be called with dev->lock held and with !ep->stopped. + */ +static void gr_start_dma(struct gr_ep *ep) +{ + struct gr_request *req; + u32 dmactrl; + + if (list_empty(&ep->queue)) { + ep->dma_start = 0; + return; + } + + req = list_first_entry(&ep->queue, struct gr_request, queue); + + /* A descriptor should already have been allocated */ + BUG_ON(!req->curr_desc); + + /* + * The DMA controller can not handle smaller OUT buffers than + * ep->ep.maxpacket. It could lead to buffer overruns if an unexpectedly + * long packet are received. Therefore an internal bounce buffer gets + * used when such a request gets enabled. + */ + if (!ep->is_in && req->oddlen) + req->last_desc->data = ep->tailbuf_paddr; + + wmb(); /* Make sure all is settled before handing it over to DMA */ + + /* Set the descriptor pointer in the hardware */ + gr_write32(&ep->regs->dmaaddr, req->curr_desc->paddr); + + /* Announce available descriptors */ + dmactrl = gr_read32(&ep->regs->dmactrl); + gr_write32(&ep->regs->dmactrl, dmactrl | GR_DMACTRL_DA); + + ep->dma_start = 1; +} + +/* + * Finishes the first request in the ep's queue and, if available, starts the + * next request in queue. + * + * Must be called with dev->lock held, irqs disabled and with !ep->stopped. + */ +static void gr_dma_advance(struct gr_ep *ep, int status) +{ + struct gr_request *req; + + req = list_first_entry(&ep->queue, struct gr_request, queue); + gr_finish_request(ep, req, status); + gr_start_dma(ep); /* Regardless of ep->dma_start */ +} + +/* + * Abort DMA for an endpoint. Sets the abort DMA bit which causes an ongoing DMA + * transfer to be canceled and clears GR_DMACTRL_DA. + * + * Must be called with dev->lock held. + */ +static void gr_abort_dma(struct gr_ep *ep) +{ + u32 dmactrl; + + dmactrl = gr_read32(&ep->regs->dmactrl); + gr_write32(&ep->regs->dmactrl, dmactrl | GR_DMACTRL_AD); +} + +/* + * Allocates and sets up a struct gr_dma_desc and putting it on the descriptor + * chain. + * + * Size is not used for OUT endpoints. Hardware can not be instructed to handle + * smaller buffer than MAXPL in the OUT direction. + */ +static int gr_add_dma_desc(struct gr_ep *ep, struct gr_request *req, + dma_addr_t data, unsigned size, gfp_t gfp_flags) +{ + struct gr_dma_desc *desc; + + desc = gr_alloc_dma_desc(ep, gfp_flags); + if (!desc) + return -ENOMEM; + + desc->data = data; + if (ep->is_in) + desc->ctrl = + (GR_DESC_IN_CTRL_LEN_MASK & size) | GR_DESC_IN_CTRL_EN; + else + desc->ctrl = GR_DESC_OUT_CTRL_IE; + + if (!req->first_desc) { + req->first_desc = desc; + req->curr_desc = desc; + } else { + req->last_desc->next_desc = desc; + req->last_desc->next = desc->paddr; + req->last_desc->ctrl |= GR_DESC_OUT_CTRL_NX; + } + req->last_desc = desc; + + return 0; +} + +/* + * Sets up a chain of struct gr_dma_descriptors pointing to buffers that + * together covers req->req.length bytes of the buffer at DMA address + * req->req.dma for the OUT direction. + * + * The first descriptor in the chain is enabled, the rest disabled. The + * interrupt handler will later enable them one by one when needed so we can + * find out when the transfer is finished. For OUT endpoints, all descriptors + * therefore generate interrutps. + */ +static int gr_setup_out_desc_list(struct gr_ep *ep, struct gr_request *req, + gfp_t gfp_flags) +{ + u16 bytes_left; /* Bytes left to provide descriptors for */ + u16 bytes_used; /* Bytes accommodated for */ + int ret = 0; + + req->first_desc = NULL; /* Signals that no allocation is done yet */ + bytes_left = req->req.length; + bytes_used = 0; + while (bytes_left > 0) { + dma_addr_t start = req->req.dma + bytes_used; + u16 size = min(bytes_left, ep->bytes_per_buffer); + + if (size < ep->bytes_per_buffer) { + /* Prepare using bounce buffer */ + req->evenlen = req->req.length - bytes_left; + req->oddlen = size; + } + + ret = gr_add_dma_desc(ep, req, start, size, gfp_flags); + if (ret) + goto alloc_err; + + bytes_left -= size; + bytes_used += size; + } + + req->first_desc->ctrl |= GR_DESC_OUT_CTRL_EN; + + return 0; + +alloc_err: + gr_free_dma_desc_chain(ep->dev, req); + + return ret; +} + +/* + * Sets up a chain of struct gr_dma_descriptors pointing to buffers that + * together covers req->req.length bytes of the buffer at DMA address + * req->req.dma for the IN direction. + * + * When more data is provided than the maximum payload size, the hardware splits + * this up into several payloads automatically. Moreover, ep->bytes_per_buffer + * is always set to a multiple of the maximum payload (restricted to the valid + * number of maximum payloads during high bandwidth isochronous or interrupt + * transfers) + * + * All descriptors are enabled from the beginning and we only generate an + * interrupt for the last one indicating that the entire request has been pushed + * to hardware. + */ +static int gr_setup_in_desc_list(struct gr_ep *ep, struct gr_request *req, + gfp_t gfp_flags) +{ + u16 bytes_left; /* Bytes left in req to provide descriptors for */ + u16 bytes_used; /* Bytes in req accommodated for */ + int ret = 0; + + req->first_desc = NULL; /* Signals that no allocation is done yet */ + bytes_left = req->req.length; + bytes_used = 0; + do { /* Allow for zero length packets */ + dma_addr_t start = req->req.dma + bytes_used; + u16 size = min(bytes_left, ep->bytes_per_buffer); + + ret = gr_add_dma_desc(ep, req, start, size, gfp_flags); + if (ret) + goto alloc_err; + + bytes_left -= size; + bytes_used += size; + } while (bytes_left > 0); + + /* + * Send an extra zero length packet to indicate that no more data is + * available when req->req.zero is set and the data length is even + * multiples of ep->ep.maxpacket. + */ + if (req->req.zero && (req->req.length % ep->ep.maxpacket == 0)) { + ret = gr_add_dma_desc(ep, req, 0, 0, gfp_flags); + if (ret) + goto alloc_err; + } + + /* + * For IN packets we only want to know when the last packet has been + * transmitted (not just put into internal buffers). + */ + req->last_desc->ctrl |= GR_DESC_IN_CTRL_PI; + + return 0; + +alloc_err: + gr_free_dma_desc_chain(ep->dev, req); + + return ret; +} + +/* Must be called with dev->lock held */ +static int gr_queue(struct gr_ep *ep, struct gr_request *req, gfp_t gfp_flags) +{ + struct gr_udc *dev = ep->dev; + int ret; + + if (unlikely(!ep->ep.desc && ep->num != 0)) { + dev_err(dev->dev, "No ep descriptor for %s\n", ep->ep.name); + return -EINVAL; + } + + if (unlikely(!req->req.buf || !list_empty(&req->queue))) { + dev_err(dev->dev, + "Invalid request for %s: buf=%p list_empty=%d\n", + ep->ep.name, req->req.buf, list_empty(&req->queue)); + return -EINVAL; + } + + if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) { + dev_err(dev->dev, "-ESHUTDOWN"); + return -ESHUTDOWN; + } + + /* Can't touch registers when suspended */ + if (dev->ep0state == GR_EP0_SUSPEND) { + dev_err(dev->dev, "-EBUSY"); + return -EBUSY; + } + + /* Set up DMA mapping in case the caller didn't */ + ret = usb_gadget_map_request(&dev->gadget, &req->req, ep->is_in); + if (ret) { + dev_err(dev->dev, "usb_gadget_map_request"); + return ret; + } + + if (ep->is_in) + ret = gr_setup_in_desc_list(ep, req, gfp_flags); + else + ret = gr_setup_out_desc_list(ep, req, gfp_flags); + if (ret) + return ret; + + req->req.status = -EINPROGRESS; + req->req.actual = 0; + list_add_tail(&req->queue, &ep->queue); + + /* Start DMA if not started, otherwise interrupt handler handles it */ + if (!ep->dma_start && likely(!ep->stopped)) + gr_start_dma(ep); + + return 0; +} + +/* + * Queue a request from within the driver. + * + * Must be called with dev->lock held. + */ +static inline int gr_queue_int(struct gr_ep *ep, struct gr_request *req, + gfp_t gfp_flags) +{ + if (ep->is_in) + gr_dbgprint_request("RESP", ep, req); + + return gr_queue(ep, req, gfp_flags); +} + +/* ---------------------------------------------------------------------- */ +/* General helper functions */ + +/* + * Dequeue ALL requests. + * + * Must be called with dev->lock held and irqs disabled. + */ +static void gr_ep_nuke(struct gr_ep *ep) +{ + struct gr_request *req; + + ep->stopped = 1; + ep->dma_start = 0; + gr_abort_dma(ep); + + while (!list_empty(&ep->queue)) { + req = list_first_entry(&ep->queue, struct gr_request, queue); + gr_finish_request(ep, req, -ESHUTDOWN); + } +} + +/* + * Reset the hardware state of this endpoint. + * + * Must be called with dev->lock held. + */ +static void gr_ep_reset(struct gr_ep *ep) +{ + gr_write32(&ep->regs->epctrl, 0); + gr_write32(&ep->regs->dmactrl, 0); + + ep->ep.maxpacket = MAX_CTRL_PL_SIZE; + ep->ep.desc = NULL; + ep->stopped = 1; + ep->dma_start = 0; +} + +/* + * Generate STALL on ep0in/out. + * + * Must be called with dev->lock held. + */ +static void gr_control_stall(struct gr_udc *dev) +{ + u32 epctrl; + + epctrl = gr_read32(&dev->epo[0].regs->epctrl); + gr_write32(&dev->epo[0].regs->epctrl, epctrl | GR_EPCTRL_CS); + epctrl = gr_read32(&dev->epi[0].regs->epctrl); + gr_write32(&dev->epi[0].regs->epctrl, epctrl | GR_EPCTRL_CS); + + dev->ep0state = GR_EP0_STALL; +} + +/* + * Halts, halts and wedges, or clears halt for an endpoint. + * + * Must be called with dev->lock held. + */ +static int gr_ep_halt_wedge(struct gr_ep *ep, int halt, int wedge, int fromhost) +{ + u32 epctrl; + int retval = 0; + + if (ep->num && !ep->ep.desc) + return -EINVAL; + + if (ep->num && ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) + return -EOPNOTSUPP; + + /* Never actually halt ep0, and therefore never clear halt for ep0 */ + if (!ep->num) { + if (halt && !fromhost) { + /* ep0 halt from gadget - generate protocol stall */ + gr_control_stall(ep->dev); + dev_dbg(ep->dev->dev, "EP: stall ep0\n"); + return 0; + } + return -EINVAL; + } + + dev_dbg(ep->dev->dev, "EP: %s halt %s\n", + (halt ? (wedge ? "wedge" : "set") : "clear"), ep->ep.name); + + epctrl = gr_read32(&ep->regs->epctrl); + if (halt) { + /* Set HALT */ + gr_write32(&ep->regs->epctrl, epctrl | GR_EPCTRL_EH); + ep->stopped = 1; + if (wedge) + ep->wedged = 1; + } else { + gr_write32(&ep->regs->epctrl, epctrl & ~GR_EPCTRL_EH); + ep->stopped = 0; + ep->wedged = 0; + + /* Things might have been queued up in the meantime */ + if (!ep->dma_start) + gr_start_dma(ep); + } + + return retval; +} + +/* Must be called with dev->lock held */ +static inline void gr_set_ep0state(struct gr_udc *dev, enum gr_ep0state value) +{ + if (dev->ep0state != value) + dev_vdbg(dev->dev, "STATE: ep0state=%s\n", + gr_ep0state_string(value)); + dev->ep0state = value; +} + +/* + * Should only be called when endpoints can not generate interrupts. + * + * Must be called with dev->lock held. + */ +static void gr_disable_interrupts_and_pullup(struct gr_udc *dev) +{ + gr_write32(&dev->regs->control, 0); + wmb(); /* Make sure that we do not deny one of our interrupts */ + dev->irq_enabled = 0; +} + +/* + * Stop all device activity and disable data line pullup. + * + * Must be called with dev->lock held and irqs disabled. + */ +static void gr_stop_activity(struct gr_udc *dev) +{ + struct gr_ep *ep; + + list_for_each_entry(ep, &dev->ep_list, ep_list) + gr_ep_nuke(ep); + + gr_disable_interrupts_and_pullup(dev); + + gr_set_ep0state(dev, GR_EP0_DISCONNECT); + usb_gadget_set_state(&dev->gadget, USB_STATE_NOTATTACHED); +} + +/* ---------------------------------------------------------------------- */ +/* ep0 setup packet handling */ + +static void gr_ep0_testmode_complete(struct usb_ep *_ep, + struct usb_request *_req) +{ + struct gr_ep *ep; + struct gr_udc *dev; + u32 control; + + ep = container_of(_ep, struct gr_ep, ep); + dev = ep->dev; + + spin_lock(&dev->lock); + + control = gr_read32(&dev->regs->control); + control |= GR_CONTROL_TM | (dev->test_mode << GR_CONTROL_TS_POS); + gr_write32(&dev->regs->control, control); + + spin_unlock(&dev->lock); +} + +static void gr_ep0_dummy_complete(struct usb_ep *_ep, struct usb_request *_req) +{ + /* Nothing needs to be done here */ +} + +/* + * Queue a response on ep0in. + * + * Must be called with dev->lock held. + */ +static int gr_ep0_respond(struct gr_udc *dev, u8 *buf, int length, + void (*complete)(struct usb_ep *ep, + struct usb_request *req)) +{ + u8 *reqbuf = dev->ep0reqi->req.buf; + int status; + int i; + + for (i = 0; i < length; i++) + reqbuf[i] = buf[i]; + dev->ep0reqi->req.length = length; + dev->ep0reqi->req.complete = complete; + + status = gr_queue_int(&dev->epi[0], dev->ep0reqi, GFP_ATOMIC); + if (status < 0) + dev_err(dev->dev, + "Could not queue ep0in setup response: %d\n", status); + + return status; +} + +/* + * Queue a 2 byte response on ep0in. + * + * Must be called with dev->lock held. + */ +static inline int gr_ep0_respond_u16(struct gr_udc *dev, u16 response) +{ + __le16 le_response = cpu_to_le16(response); + + return gr_ep0_respond(dev, (u8 *)&le_response, 2, + gr_ep0_dummy_complete); +} + +/* + * Queue a ZLP response on ep0in. + * + * Must be called with dev->lock held. + */ +static inline int gr_ep0_respond_empty(struct gr_udc *dev) +{ + return gr_ep0_respond(dev, NULL, 0, gr_ep0_dummy_complete); +} + +/* + * This is run when a SET_ADDRESS request is received. First writes + * the new address to the control register which is updated internally + * when the next IN packet is ACKED. + * + * Must be called with dev->lock held. + */ +static void gr_set_address(struct gr_udc *dev, u8 address) +{ + u32 control; + + control = gr_read32(&dev->regs->control) & ~GR_CONTROL_UA_MASK; + control |= (address << GR_CONTROL_UA_POS) & GR_CONTROL_UA_MASK; + control |= GR_CONTROL_SU; + gr_write32(&dev->regs->control, control); +} + +/* + * Returns negative for STALL, 0 for successful handling and positive for + * delegation. + * + * Must be called with dev->lock held. + */ +static int gr_device_request(struct gr_udc *dev, u8 type, u8 request, + u16 value, u16 index) +{ + u16 response; + u8 test; + + switch (request) { + case USB_REQ_SET_ADDRESS: + dev_dbg(dev->dev, "STATUS: address %d\n", value & 0xff); + gr_set_address(dev, value & 0xff); + if (value) + usb_gadget_set_state(&dev->gadget, USB_STATE_ADDRESS); + else + usb_gadget_set_state(&dev->gadget, USB_STATE_DEFAULT); + return gr_ep0_respond_empty(dev); + + case USB_REQ_GET_STATUS: + /* Self powered | remote wakeup */ + response = 0x0001 | (dev->remote_wakeup ? 0x0002 : 0); + return gr_ep0_respond_u16(dev, response); + + case USB_REQ_SET_FEATURE: + switch (value) { + case USB_DEVICE_REMOTE_WAKEUP: + /* Allow remote wakeup */ + dev->remote_wakeup = 1; + return gr_ep0_respond_empty(dev); + + case USB_DEVICE_TEST_MODE: + /* The hardware does not support USB_TEST_FORCE_ENABLE */ + test = index >> 8; + if (test >= USB_TEST_J && test <= USB_TEST_PACKET) { + dev->test_mode = test; + return gr_ep0_respond(dev, NULL, 0, + gr_ep0_testmode_complete); + } + } + break; + + case USB_REQ_CLEAR_FEATURE: + switch (value) { + case USB_DEVICE_REMOTE_WAKEUP: + /* Disallow remote wakeup */ + dev->remote_wakeup = 0; + return gr_ep0_respond_empty(dev); + } + break; + } + + return 1; /* Delegate the rest */ +} + +/* + * Returns negative for STALL, 0 for successful handling and positive for + * delegation. + * + * Must be called with dev->lock held. + */ +static int gr_interface_request(struct gr_udc *dev, u8 type, u8 request, + u16 value, u16 index) +{ + if (dev->gadget.state != USB_STATE_CONFIGURED) + return -1; + + /* + * Should return STALL for invalid interfaces, but udc driver does not + * know anything about that. However, many gadget drivers do not handle + * GET_STATUS so we need to take care of that. + */ + + switch (request) { + case USB_REQ_GET_STATUS: + return gr_ep0_respond_u16(dev, 0x0000); + + case USB_REQ_SET_FEATURE: + case USB_REQ_CLEAR_FEATURE: + /* + * No possible valid standard requests. Still let gadget drivers + * have a go at it. + */ + break; + } + + return 1; /* Delegate the rest */ +} + +/* + * Returns negative for STALL, 0 for successful handling and positive for + * delegation. + * + * Must be called with dev->lock held. + */ +static int gr_endpoint_request(struct gr_udc *dev, u8 type, u8 request, + u16 value, u16 index) +{ + struct gr_ep *ep; + int status; + int halted; + u8 epnum = index & USB_ENDPOINT_NUMBER_MASK; + u8 is_in = index & USB_ENDPOINT_DIR_MASK; + + if ((is_in && epnum >= dev->nepi) || (!is_in && epnum >= dev->nepo)) + return -1; + + if (dev->gadget.state != USB_STATE_CONFIGURED && epnum != 0) + return -1; + + ep = (is_in ? &dev->epi[epnum] : &dev->epo[epnum]); + + switch (request) { + case USB_REQ_GET_STATUS: + halted = gr_read32(&ep->regs->epctrl) & GR_EPCTRL_EH; + return gr_ep0_respond_u16(dev, halted ? 0x0001 : 0); + + case USB_REQ_SET_FEATURE: + switch (value) { + case USB_ENDPOINT_HALT: + status = gr_ep_halt_wedge(ep, 1, 0, 1); + if (status >= 0) + status = gr_ep0_respond_empty(dev); + return status; + } + break; + + case USB_REQ_CLEAR_FEATURE: + switch (value) { + case USB_ENDPOINT_HALT: + if (ep->wedged) + return -1; + status = gr_ep_halt_wedge(ep, 0, 0, 1); + if (status >= 0) + status = gr_ep0_respond_empty(dev); + return status; + } + break; + } + + return 1; /* Delegate the rest */ +} + +/* Must be called with dev->lock held */ +static void gr_ep0out_requeue(struct gr_udc *dev) +{ + int ret = gr_queue_int(&dev->epo[0], dev->ep0reqo, GFP_ATOMIC); + + if (ret) + dev_err(dev->dev, "Could not queue ep0out setup request: %d\n", + ret); +} + +/* + * The main function dealing with setup requests on ep0. + * + * Must be called with dev->lock held and irqs disabled + */ +static void gr_ep0_setup(struct gr_udc *dev, struct gr_request *req) + __releases(&dev->lock) + __acquires(&dev->lock) +{ + union { + struct usb_ctrlrequest ctrl; + u8 raw[8]; + u32 word[2]; + } u; + u8 type; + u8 request; + u16 value; + u16 index; + u16 length; + int i; + int status; + + /* Restore from ep0 halt */ + if (dev->ep0state == GR_EP0_STALL) { + gr_set_ep0state(dev, GR_EP0_SETUP); + if (!req->req.actual) + goto out; + } + + if (dev->ep0state == GR_EP0_ISTATUS) { + gr_set_ep0state(dev, GR_EP0_SETUP); + if (req->req.actual > 0) + dev_dbg(dev->dev, + "Unexpected setup packet at state %s\n", + gr_ep0state_string(GR_EP0_ISTATUS)); + else + goto out; /* Got expected ZLP */ + } else if (dev->ep0state != GR_EP0_SETUP) { + dev_info(dev->dev, + "Unexpected ep0out request at state %s - stalling\n", + gr_ep0state_string(dev->ep0state)); + gr_control_stall(dev); + gr_set_ep0state(dev, GR_EP0_SETUP); + goto out; + } else if (!req->req.actual) { + dev_dbg(dev->dev, "Unexpected ZLP at state %s\n", + gr_ep0state_string(dev->ep0state)); + goto out; + } + + /* Handle SETUP packet */ + for (i = 0; i < req->req.actual; i++) + u.raw[i] = ((u8 *)req->req.buf)[i]; + + type = u.ctrl.bRequestType; + request = u.ctrl.bRequest; + value = le16_to_cpu(u.ctrl.wValue); + index = le16_to_cpu(u.ctrl.wIndex); + length = le16_to_cpu(u.ctrl.wLength); + + gr_dbgprint_devreq(dev, type, request, value, index, length); + + /* Check for data stage */ + if (length) { + if (type & USB_DIR_IN) + gr_set_ep0state(dev, GR_EP0_IDATA); + else + gr_set_ep0state(dev, GR_EP0_ODATA); + } + + status = 1; /* Positive status flags delegation */ + if ((type & USB_TYPE_MASK) == USB_TYPE_STANDARD) { + switch (type & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + status = gr_device_request(dev, type, request, + value, index); + break; + case USB_RECIP_ENDPOINT: + status = gr_endpoint_request(dev, type, request, + value, index); + break; + case USB_RECIP_INTERFACE: + status = gr_interface_request(dev, type, request, + value, index); + break; + } + } + + if (status > 0) { + spin_unlock(&dev->lock); + + dev_vdbg(dev->dev, "DELEGATE\n"); + status = dev->driver->setup(&dev->gadget, &u.ctrl); + + spin_lock(&dev->lock); + } + + /* Generate STALL on both ep0out and ep0in if requested */ + if (unlikely(status < 0)) { + dev_vdbg(dev->dev, "STALL\n"); + gr_control_stall(dev); + } + + if ((type & USB_TYPE_MASK) == USB_TYPE_STANDARD && + request == USB_REQ_SET_CONFIGURATION) { + if (!value) { + dev_dbg(dev->dev, "STATUS: deconfigured\n"); + usb_gadget_set_state(&dev->gadget, USB_STATE_ADDRESS); + } else if (status >= 0) { + /* Not configured unless gadget OK:s it */ + dev_dbg(dev->dev, "STATUS: configured: %d\n", value); + usb_gadget_set_state(&dev->gadget, + USB_STATE_CONFIGURED); + } + } + + /* Get ready for next stage */ + if (dev->ep0state == GR_EP0_ODATA) + gr_set_ep0state(dev, GR_EP0_OSTATUS); + else if (dev->ep0state == GR_EP0_IDATA) + gr_set_ep0state(dev, GR_EP0_ISTATUS); + else + gr_set_ep0state(dev, GR_EP0_SETUP); + +out: + gr_ep0out_requeue(dev); +} + +/* ---------------------------------------------------------------------- */ +/* VBUS and USB reset handling */ + +/* Must be called with dev->lock held and irqs disabled */ +static void gr_vbus_connected(struct gr_udc *dev, u32 status) +{ + u32 control; + + dev->gadget.speed = GR_SPEED(status); + usb_gadget_set_state(&dev->gadget, USB_STATE_POWERED); + + /* Turn on full interrupts and pullup */ + control = (GR_CONTROL_SI | GR_CONTROL_UI | GR_CONTROL_VI | + GR_CONTROL_SP | GR_CONTROL_EP); + gr_write32(&dev->regs->control, control); +} + +/* Must be called with dev->lock held */ +static void gr_enable_vbus_detect(struct gr_udc *dev) +{ + u32 status; + + dev->irq_enabled = 1; + wmb(); /* Make sure we do not ignore an interrupt */ + gr_write32(&dev->regs->control, GR_CONTROL_VI); + + /* Take care of the case we are already plugged in at this point */ + status = gr_read32(&dev->regs->status); + if (status & GR_STATUS_VB) + gr_vbus_connected(dev, status); +} + +/* Must be called with dev->lock held and irqs disabled */ +static void gr_vbus_disconnected(struct gr_udc *dev) +{ + gr_stop_activity(dev); + + /* Report disconnect */ + if (dev->driver && dev->driver->disconnect) { + spin_unlock(&dev->lock); + + dev->driver->disconnect(&dev->gadget); + + spin_lock(&dev->lock); + } + + gr_enable_vbus_detect(dev); +} + +/* Must be called with dev->lock held and irqs disabled */ +static void gr_udc_usbreset(struct gr_udc *dev, u32 status) +{ + gr_set_address(dev, 0); + gr_set_ep0state(dev, GR_EP0_SETUP); + usb_gadget_set_state(&dev->gadget, USB_STATE_DEFAULT); + dev->gadget.speed = GR_SPEED(status); + + gr_ep_nuke(&dev->epo[0]); + gr_ep_nuke(&dev->epi[0]); + dev->epo[0].stopped = 0; + dev->epi[0].stopped = 0; + gr_ep0out_requeue(dev); +} + +/* ---------------------------------------------------------------------- */ +/* Irq handling */ + +/* + * Handles interrupts from in endpoints. Returns whether something was handled. + * + * Must be called with dev->lock held, irqs disabled and with !ep->stopped. + */ +static int gr_handle_in_ep(struct gr_ep *ep) +{ + struct gr_request *req; + + req = list_first_entry(&ep->queue, struct gr_request, queue); + if (!req->last_desc) + return 0; + + if (READ_ONCE(req->last_desc->ctrl) & GR_DESC_IN_CTRL_EN) + return 0; /* Not put in hardware buffers yet */ + + if (gr_read32(&ep->regs->epstat) & (GR_EPSTAT_B1 | GR_EPSTAT_B0)) + return 0; /* Not transmitted yet, still in hardware buffers */ + + /* Write complete */ + gr_dma_advance(ep, 0); + + return 1; +} + +/* + * Handles interrupts from out endpoints. Returns whether something was handled. + * + * Must be called with dev->lock held, irqs disabled and with !ep->stopped. + */ +static int gr_handle_out_ep(struct gr_ep *ep) +{ + u32 ep_dmactrl; + u32 ctrl; + u16 len; + struct gr_request *req; + struct gr_udc *dev = ep->dev; + + req = list_first_entry(&ep->queue, struct gr_request, queue); + if (!req->curr_desc) + return 0; + + ctrl = READ_ONCE(req->curr_desc->ctrl); + if (ctrl & GR_DESC_OUT_CTRL_EN) + return 0; /* Not received yet */ + + /* Read complete */ + len = ctrl & GR_DESC_OUT_CTRL_LEN_MASK; + req->req.actual += len; + if (ctrl & GR_DESC_OUT_CTRL_SE) + req->setup = 1; + + if (len < ep->ep.maxpacket || req->req.actual >= req->req.length) { + /* Short packet or >= expected size - we are done */ + + if ((ep == &dev->epo[0]) && (dev->ep0state == GR_EP0_OSTATUS)) { + /* + * Send a status stage ZLP to ack the DATA stage in the + * OUT direction. This needs to be done before + * gr_dma_advance as that can lead to a call to + * ep0_setup that can change dev->ep0state. + */ + gr_ep0_respond_empty(dev); + gr_set_ep0state(dev, GR_EP0_SETUP); + } + + gr_dma_advance(ep, 0); + } else { + /* Not done yet. Enable the next descriptor to receive more. */ + req->curr_desc = req->curr_desc->next_desc; + req->curr_desc->ctrl |= GR_DESC_OUT_CTRL_EN; + + ep_dmactrl = gr_read32(&ep->regs->dmactrl); + gr_write32(&ep->regs->dmactrl, ep_dmactrl | GR_DMACTRL_DA); + } + + return 1; +} + +/* + * Handle state changes. Returns whether something was handled. + * + * Must be called with dev->lock held and irqs disabled. + */ +static int gr_handle_state_changes(struct gr_udc *dev) +{ + u32 status = gr_read32(&dev->regs->status); + int handled = 0; + int powstate = !(dev->gadget.state == USB_STATE_NOTATTACHED || + dev->gadget.state == USB_STATE_ATTACHED); + + /* VBUS valid detected */ + if (!powstate && (status & GR_STATUS_VB)) { + dev_dbg(dev->dev, "STATUS: vbus valid detected\n"); + gr_vbus_connected(dev, status); + handled = 1; + } + + /* Disconnect */ + if (powstate && !(status & GR_STATUS_VB)) { + dev_dbg(dev->dev, "STATUS: vbus invalid detected\n"); + gr_vbus_disconnected(dev); + handled = 1; + } + + /* USB reset detected */ + if (status & GR_STATUS_UR) { + dev_dbg(dev->dev, "STATUS: USB reset - speed is %s\n", + GR_SPEED_STR(status)); + gr_write32(&dev->regs->status, GR_STATUS_UR); + gr_udc_usbreset(dev, status); + handled = 1; + } + + /* Speed change */ + if (dev->gadget.speed != GR_SPEED(status)) { + dev_dbg(dev->dev, "STATUS: USB Speed change to %s\n", + GR_SPEED_STR(status)); + dev->gadget.speed = GR_SPEED(status); + handled = 1; + } + + /* Going into suspend */ + if ((dev->ep0state != GR_EP0_SUSPEND) && !(status & GR_STATUS_SU)) { + dev_dbg(dev->dev, "STATUS: USB suspend\n"); + gr_set_ep0state(dev, GR_EP0_SUSPEND); + dev->suspended_from = dev->gadget.state; + usb_gadget_set_state(&dev->gadget, USB_STATE_SUSPENDED); + + if ((dev->gadget.speed != USB_SPEED_UNKNOWN) && + dev->driver && dev->driver->suspend) { + spin_unlock(&dev->lock); + + dev->driver->suspend(&dev->gadget); + + spin_lock(&dev->lock); + } + handled = 1; + } + + /* Coming out of suspend */ + if ((dev->ep0state == GR_EP0_SUSPEND) && (status & GR_STATUS_SU)) { + dev_dbg(dev->dev, "STATUS: USB resume\n"); + if (dev->suspended_from == USB_STATE_POWERED) + gr_set_ep0state(dev, GR_EP0_DISCONNECT); + else + gr_set_ep0state(dev, GR_EP0_SETUP); + usb_gadget_set_state(&dev->gadget, dev->suspended_from); + + if ((dev->gadget.speed != USB_SPEED_UNKNOWN) && + dev->driver && dev->driver->resume) { + spin_unlock(&dev->lock); + + dev->driver->resume(&dev->gadget); + + spin_lock(&dev->lock); + } + handled = 1; + } + + return handled; +} + +/* Non-interrupt context irq handler */ +static irqreturn_t gr_irq_handler(int irq, void *_dev) +{ + struct gr_udc *dev = _dev; + struct gr_ep *ep; + int handled = 0; + int i; + unsigned long flags; + + spin_lock_irqsave(&dev->lock, flags); + + if (!dev->irq_enabled) + goto out; + + /* + * Check IN ep interrupts. We check these before the OUT eps because + * some gadgets reuse the request that might already be currently + * outstanding and needs to be completed (mainly setup requests). + */ + for (i = 0; i < dev->nepi; i++) { + ep = &dev->epi[i]; + if (!ep->stopped && !ep->callback && !list_empty(&ep->queue)) + handled = gr_handle_in_ep(ep) || handled; + } + + /* Check OUT ep interrupts */ + for (i = 0; i < dev->nepo; i++) { + ep = &dev->epo[i]; + if (!ep->stopped && !ep->callback && !list_empty(&ep->queue)) + handled = gr_handle_out_ep(ep) || handled; + } + + /* Check status interrupts */ + handled = gr_handle_state_changes(dev) || handled; + + /* + * Check AMBA DMA errors. Only check if we didn't find anything else to + * handle because this shouldn't happen if we did everything right. + */ + if (!handled) { + list_for_each_entry(ep, &dev->ep_list, ep_list) { + if (gr_read32(&ep->regs->dmactrl) & GR_DMACTRL_AE) { + dev_err(dev->dev, + "AMBA Error occurred for %s\n", + ep->ep.name); + handled = 1; + } + } + } + +out: + spin_unlock_irqrestore(&dev->lock, flags); + + return handled ? IRQ_HANDLED : IRQ_NONE; +} + +/* Interrupt context irq handler */ +static irqreturn_t gr_irq(int irq, void *_dev) +{ + struct gr_udc *dev = _dev; + + if (!dev->irq_enabled) + return IRQ_NONE; + + return IRQ_WAKE_THREAD; +} + +/* ---------------------------------------------------------------------- */ +/* USB ep ops */ + +/* Enable endpoint. Not for ep0in and ep0out that are handled separately. */ +static int gr_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct gr_udc *dev; + struct gr_ep *ep; + u8 mode; + u8 nt; + u16 max; + u16 buffer_size = 0; + u32 epctrl; + + ep = container_of(_ep, struct gr_ep, ep); + if (!_ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) + return -EINVAL; + + dev = ep->dev; + + /* 'ep0' IN and OUT are reserved */ + if (ep == &dev->epo[0] || ep == &dev->epi[0]) + return -EINVAL; + + if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + /* Make sure we are clear for enabling */ + epctrl = gr_read32(&ep->regs->epctrl); + if (epctrl & GR_EPCTRL_EV) + return -EBUSY; + + /* Check that directions match */ + if (!ep->is_in != !usb_endpoint_dir_in(desc)) + return -EINVAL; + + /* Check ep num */ + if ((!ep->is_in && ep->num >= dev->nepo) || + (ep->is_in && ep->num >= dev->nepi)) + return -EINVAL; + + if (usb_endpoint_xfer_control(desc)) { + mode = 0; + } else if (usb_endpoint_xfer_isoc(desc)) { + mode = 1; + } else if (usb_endpoint_xfer_bulk(desc)) { + mode = 2; + } else if (usb_endpoint_xfer_int(desc)) { + mode = 3; + } else { + dev_err(dev->dev, "Unknown transfer type for %s\n", + ep->ep.name); + return -EINVAL; + } + + /* + * Bits 10-0 set the max payload. 12-11 set the number of + * additional transactions. + */ + max = usb_endpoint_maxp(desc); + nt = usb_endpoint_maxp_mult(desc) - 1; + buffer_size = GR_BUFFER_SIZE(epctrl); + if (nt && (mode == 0 || mode == 2)) { + dev_err(dev->dev, + "%s mode: multiple trans./microframe not valid\n", + (mode == 2 ? "Bulk" : "Control")); + return -EINVAL; + } else if (nt == 0x3) { + dev_err(dev->dev, + "Invalid value 0x3 for additional trans./microframe\n"); + return -EINVAL; + } else if ((nt + 1) * max > buffer_size) { + dev_err(dev->dev, "Hw buffer size %d < max payload %d * %d\n", + buffer_size, (nt + 1), max); + return -EINVAL; + } else if (max == 0) { + dev_err(dev->dev, "Max payload cannot be set to 0\n"); + return -EINVAL; + } else if (max > ep->ep.maxpacket_limit) { + dev_err(dev->dev, "Requested max payload %d > limit %d\n", + max, ep->ep.maxpacket_limit); + return -EINVAL; + } + + spin_lock(&ep->dev->lock); + + if (!ep->stopped) { + spin_unlock(&ep->dev->lock); + return -EBUSY; + } + + ep->stopped = 0; + ep->wedged = 0; + ep->ep.desc = desc; + ep->ep.maxpacket = max; + ep->dma_start = 0; + + + if (nt) { + /* + * Maximum possible size of all payloads in one microframe + * regardless of direction when using high-bandwidth mode. + */ + ep->bytes_per_buffer = (nt + 1) * max; + } else if (ep->is_in) { + /* + * The biggest multiple of maximum packet size that fits into + * the buffer. The hardware will split up into many packets in + * the IN direction. + */ + ep->bytes_per_buffer = (buffer_size / max) * max; + } else { + /* + * Only single packets will be placed the buffers in the OUT + * direction. + */ + ep->bytes_per_buffer = max; + } + + epctrl = (max << GR_EPCTRL_MAXPL_POS) + | (nt << GR_EPCTRL_NT_POS) + | (mode << GR_EPCTRL_TT_POS) + | GR_EPCTRL_EV; + if (ep->is_in) + epctrl |= GR_EPCTRL_PI; + gr_write32(&ep->regs->epctrl, epctrl); + + gr_write32(&ep->regs->dmactrl, GR_DMACTRL_IE | GR_DMACTRL_AI); + + spin_unlock(&ep->dev->lock); + + dev_dbg(ep->dev->dev, "EP: %s enabled - %s with %d bytes/buffer\n", + ep->ep.name, gr_modestring[mode], ep->bytes_per_buffer); + return 0; +} + +/* Disable endpoint. Not for ep0in and ep0out that are handled separately. */ +static int gr_ep_disable(struct usb_ep *_ep) +{ + struct gr_ep *ep; + struct gr_udc *dev; + unsigned long flags; + + ep = container_of(_ep, struct gr_ep, ep); + if (!_ep || !ep->ep.desc) + return -ENODEV; + + dev = ep->dev; + + /* 'ep0' IN and OUT are reserved */ + if (ep == &dev->epo[0] || ep == &dev->epi[0]) + return -EINVAL; + + if (dev->ep0state == GR_EP0_SUSPEND) + return -EBUSY; + + dev_dbg(ep->dev->dev, "EP: disable %s\n", ep->ep.name); + + spin_lock_irqsave(&dev->lock, flags); + + gr_ep_nuke(ep); + gr_ep_reset(ep); + ep->ep.desc = NULL; + + spin_unlock_irqrestore(&dev->lock, flags); + + return 0; +} + +/* + * Frees a request, but not any DMA buffers associated with it + * (gr_finish_request should already have taken care of that). + */ +static void gr_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct gr_request *req; + + if (!_ep || !_req) + return; + req = container_of(_req, struct gr_request, req); + + /* Leads to memory leak */ + WARN(!list_empty(&req->queue), + "request not dequeued properly before freeing\n"); + + kfree(req); +} + +/* Queue a request from the gadget */ +static int gr_queue_ext(struct usb_ep *_ep, struct usb_request *_req, + gfp_t gfp_flags) +{ + struct gr_ep *ep; + struct gr_request *req; + struct gr_udc *dev; + int ret; + + if (unlikely(!_ep || !_req)) + return -EINVAL; + + ep = container_of(_ep, struct gr_ep, ep); + req = container_of(_req, struct gr_request, req); + dev = ep->dev; + + spin_lock(&ep->dev->lock); + + /* + * The ep0 pointer in the gadget struct is used both for ep0in and + * ep0out. In a data stage in the out direction ep0out needs to be used + * instead of the default ep0in. Completion functions might use + * driver_data, so that needs to be copied as well. + */ + if ((ep == &dev->epi[0]) && (dev->ep0state == GR_EP0_ODATA)) { + ep = &dev->epo[0]; + ep->ep.driver_data = dev->epi[0].ep.driver_data; + } + + if (ep->is_in) + gr_dbgprint_request("EXTERN", ep, req); + + ret = gr_queue(ep, req, GFP_ATOMIC); + + spin_unlock(&ep->dev->lock); + + return ret; +} + +/* Dequeue JUST ONE request */ +static int gr_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct gr_request *req = NULL, *iter; + struct gr_ep *ep; + struct gr_udc *dev; + int ret = 0; + unsigned long flags; + + ep = container_of(_ep, struct gr_ep, ep); + if (!_ep || !_req || (!ep->ep.desc && ep->num != 0)) + return -EINVAL; + dev = ep->dev; + if (!dev->driver) + return -ESHUTDOWN; + + /* We can't touch (DMA) registers when suspended */ + if (dev->ep0state == GR_EP0_SUSPEND) + return -EBUSY; + + spin_lock_irqsave(&dev->lock, flags); + + /* Make sure it's actually queued on this endpoint */ + list_for_each_entry(iter, &ep->queue, queue) { + if (&iter->req != _req) + continue; + req = iter; + break; + } + if (!req) { + ret = -EINVAL; + goto out; + } + + if (list_first_entry(&ep->queue, struct gr_request, queue) == req) { + /* This request is currently being processed */ + gr_abort_dma(ep); + if (ep->stopped) + gr_finish_request(ep, req, -ECONNRESET); + else + gr_dma_advance(ep, -ECONNRESET); + } else if (!list_empty(&req->queue)) { + /* Not being processed - gr_finish_request dequeues it */ + gr_finish_request(ep, req, -ECONNRESET); + } else { + ret = -EOPNOTSUPP; + } + +out: + spin_unlock_irqrestore(&dev->lock, flags); + + return ret; +} + +/* Helper for gr_set_halt and gr_set_wedge */ +static int gr_set_halt_wedge(struct usb_ep *_ep, int halt, int wedge) +{ + int ret; + struct gr_ep *ep; + + if (!_ep) + return -ENODEV; + ep = container_of(_ep, struct gr_ep, ep); + + spin_lock(&ep->dev->lock); + + /* Halting an IN endpoint should fail if queue is not empty */ + if (halt && ep->is_in && !list_empty(&ep->queue)) { + ret = -EAGAIN; + goto out; + } + + ret = gr_ep_halt_wedge(ep, halt, wedge, 0); + +out: + spin_unlock(&ep->dev->lock); + + return ret; +} + +/* Halt endpoint */ +static int gr_set_halt(struct usb_ep *_ep, int halt) +{ + return gr_set_halt_wedge(_ep, halt, 0); +} + +/* Halt and wedge endpoint */ +static int gr_set_wedge(struct usb_ep *_ep) +{ + return gr_set_halt_wedge(_ep, 1, 1); +} + +/* + * Return the total number of bytes currently stored in the internal buffers of + * the endpoint. + */ +static int gr_fifo_status(struct usb_ep *_ep) +{ + struct gr_ep *ep; + u32 epstat; + u32 bytes = 0; + + if (!_ep) + return -ENODEV; + ep = container_of(_ep, struct gr_ep, ep); + + epstat = gr_read32(&ep->regs->epstat); + + if (epstat & GR_EPSTAT_B0) + bytes += (epstat & GR_EPSTAT_B0CNT_MASK) >> GR_EPSTAT_B0CNT_POS; + if (epstat & GR_EPSTAT_B1) + bytes += (epstat & GR_EPSTAT_B1CNT_MASK) >> GR_EPSTAT_B1CNT_POS; + + return bytes; +} + + +/* Empty data from internal buffers of an endpoint. */ +static void gr_fifo_flush(struct usb_ep *_ep) +{ + struct gr_ep *ep; + u32 epctrl; + + if (!_ep) + return; + ep = container_of(_ep, struct gr_ep, ep); + dev_vdbg(ep->dev->dev, "EP: flush fifo %s\n", ep->ep.name); + + spin_lock(&ep->dev->lock); + + epctrl = gr_read32(&ep->regs->epctrl); + epctrl |= GR_EPCTRL_CB; + gr_write32(&ep->regs->epctrl, epctrl); + + spin_unlock(&ep->dev->lock); +} + +static const struct usb_ep_ops gr_ep_ops = { + .enable = gr_ep_enable, + .disable = gr_ep_disable, + + .alloc_request = gr_alloc_request, + .free_request = gr_free_request, + + .queue = gr_queue_ext, + .dequeue = gr_dequeue, + + .set_halt = gr_set_halt, + .set_wedge = gr_set_wedge, + .fifo_status = gr_fifo_status, + .fifo_flush = gr_fifo_flush, +}; + +/* ---------------------------------------------------------------------- */ +/* USB Gadget ops */ + +static int gr_get_frame(struct usb_gadget *_gadget) +{ + struct gr_udc *dev; + + if (!_gadget) + return -ENODEV; + dev = container_of(_gadget, struct gr_udc, gadget); + return gr_read32(&dev->regs->status) & GR_STATUS_FN_MASK; +} + +static int gr_wakeup(struct usb_gadget *_gadget) +{ + struct gr_udc *dev; + + if (!_gadget) + return -ENODEV; + dev = container_of(_gadget, struct gr_udc, gadget); + + /* Remote wakeup feature not enabled by host*/ + if (!dev->remote_wakeup) + return -EINVAL; + + spin_lock(&dev->lock); + + gr_write32(&dev->regs->control, + gr_read32(&dev->regs->control) | GR_CONTROL_RW); + + spin_unlock(&dev->lock); + + return 0; +} + +static int gr_pullup(struct usb_gadget *_gadget, int is_on) +{ + struct gr_udc *dev; + u32 control; + + if (!_gadget) + return -ENODEV; + dev = container_of(_gadget, struct gr_udc, gadget); + + spin_lock(&dev->lock); + + control = gr_read32(&dev->regs->control); + if (is_on) + control |= GR_CONTROL_EP; + else + control &= ~GR_CONTROL_EP; + gr_write32(&dev->regs->control, control); + + spin_unlock(&dev->lock); + + return 0; +} + +static int gr_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct gr_udc *dev = to_gr_udc(gadget); + + spin_lock(&dev->lock); + + /* Hook up the driver */ + dev->driver = driver; + + /* Get ready for host detection */ + gr_enable_vbus_detect(dev); + + spin_unlock(&dev->lock); + + return 0; +} + +static int gr_udc_stop(struct usb_gadget *gadget) +{ + struct gr_udc *dev = to_gr_udc(gadget); + unsigned long flags; + + spin_lock_irqsave(&dev->lock, flags); + + dev->driver = NULL; + gr_stop_activity(dev); + + spin_unlock_irqrestore(&dev->lock, flags); + + return 0; +} + +static const struct usb_gadget_ops gr_ops = { + .get_frame = gr_get_frame, + .wakeup = gr_wakeup, + .pullup = gr_pullup, + .udc_start = gr_udc_start, + .udc_stop = gr_udc_stop, + /* Other operations not supported */ +}; + +/* ---------------------------------------------------------------------- */ +/* Module probe, removal and of-matching */ + +static const char * const onames[] = { + "ep0out", "ep1out", "ep2out", "ep3out", "ep4out", "ep5out", + "ep6out", "ep7out", "ep8out", "ep9out", "ep10out", "ep11out", + "ep12out", "ep13out", "ep14out", "ep15out" +}; + +static const char * const inames[] = { + "ep0in", "ep1in", "ep2in", "ep3in", "ep4in", "ep5in", + "ep6in", "ep7in", "ep8in", "ep9in", "ep10in", "ep11in", + "ep12in", "ep13in", "ep14in", "ep15in" +}; + +/* Must be called with dev->lock held */ +static int gr_ep_init(struct gr_udc *dev, int num, int is_in, u32 maxplimit) +{ + struct gr_ep *ep; + struct gr_request *req; + struct usb_request *_req; + void *buf; + + if (is_in) { + ep = &dev->epi[num]; + ep->ep.name = inames[num]; + ep->regs = &dev->regs->epi[num]; + } else { + ep = &dev->epo[num]; + ep->ep.name = onames[num]; + ep->regs = &dev->regs->epo[num]; + } + + gr_ep_reset(ep); + ep->num = num; + ep->is_in = is_in; + ep->dev = dev; + ep->ep.ops = &gr_ep_ops; + INIT_LIST_HEAD(&ep->queue); + + if (num == 0) { + _req = gr_alloc_request(&ep->ep, GFP_ATOMIC); + if (!_req) + return -ENOMEM; + + buf = devm_kzalloc(dev->dev, PAGE_SIZE, GFP_DMA | GFP_ATOMIC); + if (!buf) { + gr_free_request(&ep->ep, _req); + return -ENOMEM; + } + + req = container_of(_req, struct gr_request, req); + req->req.buf = buf; + req->req.length = MAX_CTRL_PL_SIZE; + + if (is_in) + dev->ep0reqi = req; /* Complete gets set as used */ + else + dev->ep0reqo = req; /* Completion treated separately */ + + usb_ep_set_maxpacket_limit(&ep->ep, MAX_CTRL_PL_SIZE); + ep->bytes_per_buffer = MAX_CTRL_PL_SIZE; + + ep->ep.caps.type_control = true; + } else { + usb_ep_set_maxpacket_limit(&ep->ep, (u16)maxplimit); + list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list); + + ep->ep.caps.type_iso = true; + ep->ep.caps.type_bulk = true; + ep->ep.caps.type_int = true; + } + list_add_tail(&ep->ep_list, &dev->ep_list); + + if (is_in) + ep->ep.caps.dir_in = true; + else + ep->ep.caps.dir_out = true; + + ep->tailbuf = dma_alloc_coherent(dev->dev, ep->ep.maxpacket_limit, + &ep->tailbuf_paddr, GFP_ATOMIC); + if (!ep->tailbuf) + return -ENOMEM; + + return 0; +} + +/* Must be called with dev->lock held */ +static int gr_udc_init(struct gr_udc *dev) +{ + struct device_node *np = dev->dev->of_node; + u32 epctrl_val; + u32 dmactrl_val; + int i; + int ret = 0; + u32 bufsize; + + gr_set_address(dev, 0); + + INIT_LIST_HEAD(&dev->gadget.ep_list); + dev->gadget.speed = USB_SPEED_UNKNOWN; + dev->gadget.ep0 = &dev->epi[0].ep; + + INIT_LIST_HEAD(&dev->ep_list); + gr_set_ep0state(dev, GR_EP0_DISCONNECT); + + for (i = 0; i < dev->nepo; i++) { + if (of_property_read_u32_index(np, "epobufsizes", i, &bufsize)) + bufsize = 1024; + ret = gr_ep_init(dev, i, 0, bufsize); + if (ret) + return ret; + } + + for (i = 0; i < dev->nepi; i++) { + if (of_property_read_u32_index(np, "epibufsizes", i, &bufsize)) + bufsize = 1024; + ret = gr_ep_init(dev, i, 1, bufsize); + if (ret) + return ret; + } + + /* Must be disabled by default */ + dev->remote_wakeup = 0; + + /* Enable ep0out and ep0in */ + epctrl_val = (MAX_CTRL_PL_SIZE << GR_EPCTRL_MAXPL_POS) | GR_EPCTRL_EV; + dmactrl_val = GR_DMACTRL_IE | GR_DMACTRL_AI; + gr_write32(&dev->epo[0].regs->epctrl, epctrl_val); + gr_write32(&dev->epi[0].regs->epctrl, epctrl_val | GR_EPCTRL_PI); + gr_write32(&dev->epo[0].regs->dmactrl, dmactrl_val); + gr_write32(&dev->epi[0].regs->dmactrl, dmactrl_val); + + return 0; +} + +static void gr_ep_remove(struct gr_udc *dev, int num, int is_in) +{ + struct gr_ep *ep; + + if (is_in) + ep = &dev->epi[num]; + else + ep = &dev->epo[num]; + + if (ep->tailbuf) + dma_free_coherent(dev->dev, ep->ep.maxpacket_limit, + ep->tailbuf, ep->tailbuf_paddr); +} + +static int gr_remove(struct platform_device *pdev) +{ + struct gr_udc *dev = platform_get_drvdata(pdev); + int i; + + if (dev->added) + usb_del_gadget_udc(&dev->gadget); /* Shuts everything down */ + if (dev->driver) + return -EBUSY; + + gr_dfs_delete(dev); + dma_pool_destroy(dev->desc_pool); + platform_set_drvdata(pdev, NULL); + + gr_free_request(&dev->epi[0].ep, &dev->ep0reqi->req); + gr_free_request(&dev->epo[0].ep, &dev->ep0reqo->req); + + for (i = 0; i < dev->nepo; i++) + gr_ep_remove(dev, i, 0); + for (i = 0; i < dev->nepi; i++) + gr_ep_remove(dev, i, 1); + + return 0; +} +static int gr_request_irq(struct gr_udc *dev, int irq) +{ + return devm_request_threaded_irq(dev->dev, irq, gr_irq, gr_irq_handler, + IRQF_SHARED, driver_name, dev); +} + +static int gr_probe(struct platform_device *pdev) +{ + struct gr_udc *dev; + struct gr_regs __iomem *regs; + int retval; + u32 status; + + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); + if (!dev) + return -ENOMEM; + dev->dev = &pdev->dev; + + regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + dev->irq = platform_get_irq(pdev, 0); + if (dev->irq <= 0) + return -ENODEV; + + /* Some core configurations has separate irqs for IN and OUT events */ + dev->irqi = platform_get_irq(pdev, 1); + if (dev->irqi > 0) { + dev->irqo = platform_get_irq(pdev, 2); + if (dev->irqo <= 0) + return -ENODEV; + } else { + dev->irqi = 0; + } + + dev->gadget.name = driver_name; + dev->gadget.max_speed = USB_SPEED_HIGH; + dev->gadget.ops = &gr_ops; + + spin_lock_init(&dev->lock); + dev->regs = regs; + + platform_set_drvdata(pdev, dev); + + /* Determine number of endpoints and data interface mode */ + status = gr_read32(&dev->regs->status); + dev->nepi = ((status & GR_STATUS_NEPI_MASK) >> GR_STATUS_NEPI_POS) + 1; + dev->nepo = ((status & GR_STATUS_NEPO_MASK) >> GR_STATUS_NEPO_POS) + 1; + + if (!(status & GR_STATUS_DM)) { + dev_err(dev->dev, "Slave mode cores are not supported\n"); + return -ENODEV; + } + + /* --- Effects of the following calls might need explicit cleanup --- */ + + /* Create DMA pool for descriptors */ + dev->desc_pool = dma_pool_create("desc_pool", dev->dev, + sizeof(struct gr_dma_desc), 4, 0); + if (!dev->desc_pool) { + dev_err(dev->dev, "Could not allocate DMA pool"); + return -ENOMEM; + } + + /* Inside lock so that no gadget can use this udc until probe is done */ + retval = usb_add_gadget_udc(dev->dev, &dev->gadget); + if (retval) { + dev_err(dev->dev, "Could not add gadget udc"); + goto out; + } + dev->added = 1; + + spin_lock(&dev->lock); + + retval = gr_udc_init(dev); + if (retval) { + spin_unlock(&dev->lock); + goto out; + } + + /* Clear all interrupt enables that might be left on since last boot */ + gr_disable_interrupts_and_pullup(dev); + + spin_unlock(&dev->lock); + + gr_dfs_create(dev); + + retval = gr_request_irq(dev, dev->irq); + if (retval) { + dev_err(dev->dev, "Failed to request irq %d\n", dev->irq); + goto out; + } + + if (dev->irqi) { + retval = gr_request_irq(dev, dev->irqi); + if (retval) { + dev_err(dev->dev, "Failed to request irqi %d\n", + dev->irqi); + goto out; + } + retval = gr_request_irq(dev, dev->irqo); + if (retval) { + dev_err(dev->dev, "Failed to request irqo %d\n", + dev->irqo); + goto out; + } + } + + if (dev->irqi) + dev_info(dev->dev, "regs: %p, irqs %d, %d, %d\n", dev->regs, + dev->irq, dev->irqi, dev->irqo); + else + dev_info(dev->dev, "regs: %p, irq %d\n", dev->regs, dev->irq); + +out: + if (retval) + gr_remove(pdev); + + return retval; +} + +static const struct of_device_id gr_match[] = { + {.name = "GAISLER_USBDC"}, + {.name = "01_021"}, + {}, +}; +MODULE_DEVICE_TABLE(of, gr_match); + +static struct platform_driver gr_driver = { + .driver = { + .name = DRIVER_NAME, + .of_match_table = gr_match, + }, + .probe = gr_probe, + .remove = gr_remove, +}; +module_platform_driver(gr_driver); + +MODULE_AUTHOR("Aeroflex Gaisler AB."); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/udc/gr_udc.h b/drivers/usb/gadget/udc/gr_udc.h new file mode 100644 index 000000000..701342391 --- /dev/null +++ b/drivers/usb/gadget/udc/gr_udc.h @@ -0,0 +1,220 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * USB Peripheral Controller driver for Aeroflex Gaisler GRUSBDC. + * + * 2013 (c) Aeroflex Gaisler AB + * + * This driver supports GRUSBDC USB Device Controller cores available in the + * GRLIB VHDL IP core library. + * + * Full documentation of the GRUSBDC core can be found here: + * https://www.gaisler.com/products/grlib/grip.pdf + * + * Contributors: + * - Andreas Larsson <andreas@gaisler.com> + * - Marko Isomaki + */ + +/* Control registers on the AMBA bus */ + +#define GR_MAXEP 16 /* Max # endpoints for *each* direction */ + +struct gr_epregs { + u32 epctrl; + union { + struct { /* Slave mode*/ + u32 slvctrl; + u32 slvdata; + }; + struct { /* DMA mode*/ + u32 dmactrl; + u32 dmaaddr; + }; + }; + u32 epstat; +}; + +struct gr_regs { + struct gr_epregs epo[GR_MAXEP]; /* 0x000 - 0x0fc */ + struct gr_epregs epi[GR_MAXEP]; /* 0x100 - 0x1fc */ + u32 control; /* 0x200 */ + u32 status; /* 0x204 */ +}; + +#define GR_EPCTRL_BUFSZ_SCALER 8 +#define GR_EPCTRL_BUFSZ_MASK 0xffe00000 +#define GR_EPCTRL_BUFSZ_POS 21 +#define GR_EPCTRL_PI BIT(20) +#define GR_EPCTRL_CB BIT(19) +#define GR_EPCTRL_CS BIT(18) +#define GR_EPCTRL_MAXPL_MASK 0x0003ff80 +#define GR_EPCTRL_MAXPL_POS 7 +#define GR_EPCTRL_NT_MASK 0x00000060 +#define GR_EPCTRL_NT_POS 5 +#define GR_EPCTRL_TT_MASK 0x00000018 +#define GR_EPCTRL_TT_POS 3 +#define GR_EPCTRL_EH BIT(2) +#define GR_EPCTRL_ED BIT(1) +#define GR_EPCTRL_EV BIT(0) + +#define GR_DMACTRL_AE BIT(10) +#define GR_DMACTRL_AD BIT(3) +#define GR_DMACTRL_AI BIT(2) +#define GR_DMACTRL_IE BIT(1) +#define GR_DMACTRL_DA BIT(0) + +#define GR_EPSTAT_PT BIT(29) +#define GR_EPSTAT_PR BIT(29) +#define GR_EPSTAT_B1CNT_MASK 0x1fff0000 +#define GR_EPSTAT_B1CNT_POS 16 +#define GR_EPSTAT_B0CNT_MASK 0x0000fff8 +#define GR_EPSTAT_B0CNT_POS 3 +#define GR_EPSTAT_B1 BIT(2) +#define GR_EPSTAT_B0 BIT(1) +#define GR_EPSTAT_BS BIT(0) + +#define GR_CONTROL_SI BIT(31) +#define GR_CONTROL_UI BIT(30) +#define GR_CONTROL_VI BIT(29) +#define GR_CONTROL_SP BIT(28) +#define GR_CONTROL_FI BIT(27) +#define GR_CONTROL_EP BIT(14) +#define GR_CONTROL_DH BIT(13) +#define GR_CONTROL_RW BIT(12) +#define GR_CONTROL_TS_MASK 0x00000e00 +#define GR_CONTROL_TS_POS 9 +#define GR_CONTROL_TM BIT(8) +#define GR_CONTROL_UA_MASK 0x000000fe +#define GR_CONTROL_UA_POS 1 +#define GR_CONTROL_SU BIT(0) + +#define GR_STATUS_NEPI_MASK 0xf0000000 +#define GR_STATUS_NEPI_POS 28 +#define GR_STATUS_NEPO_MASK 0x0f000000 +#define GR_STATUS_NEPO_POS 24 +#define GR_STATUS_DM BIT(23) +#define GR_STATUS_SU BIT(17) +#define GR_STATUS_UR BIT(16) +#define GR_STATUS_VB BIT(15) +#define GR_STATUS_SP BIT(14) +#define GR_STATUS_AF_MASK 0x00003800 +#define GR_STATUS_AF_POS 11 +#define GR_STATUS_FN_MASK 0x000007ff +#define GR_STATUS_FN_POS 0 + + +#define MAX_CTRL_PL_SIZE 64 /* As per USB standard for full and high speed */ + +/*-------------------------------------------------------------------------*/ + +/* Driver data structures and utilities */ + +struct gr_dma_desc { + u32 ctrl; + u32 data; + u32 next; + + /* These must be last because hw uses the previous three */ + u32 paddr; + struct gr_dma_desc *next_desc; +}; + +#define GR_DESC_OUT_CTRL_SE BIT(17) +#define GR_DESC_OUT_CTRL_IE BIT(15) +#define GR_DESC_OUT_CTRL_NX BIT(14) +#define GR_DESC_OUT_CTRL_EN BIT(13) +#define GR_DESC_OUT_CTRL_LEN_MASK 0x00001fff + +#define GR_DESC_IN_CTRL_MO BIT(18) +#define GR_DESC_IN_CTRL_PI BIT(17) +#define GR_DESC_IN_CTRL_ML BIT(16) +#define GR_DESC_IN_CTRL_IE BIT(15) +#define GR_DESC_IN_CTRL_NX BIT(14) +#define GR_DESC_IN_CTRL_EN BIT(13) +#define GR_DESC_IN_CTRL_LEN_MASK 0x00001fff + +#define GR_DESC_DMAADDR_MASK 0xfffffffc + +struct gr_ep { + struct usb_ep ep; + struct gr_udc *dev; + u16 bytes_per_buffer; + unsigned int dma_start; + struct gr_epregs __iomem *regs; + + unsigned num:8; + unsigned is_in:1; + unsigned stopped:1; + unsigned wedged:1; + unsigned callback:1; + + /* analogous to a host-side qh */ + struct list_head queue; + + struct list_head ep_list; + + /* Bounce buffer for end of "odd" sized OUT requests */ + void *tailbuf; + dma_addr_t tailbuf_paddr; +}; + +struct gr_request { + struct usb_request req; + struct list_head queue; + + /* Chain of dma descriptors */ + struct gr_dma_desc *first_desc; /* First in the chain */ + struct gr_dma_desc *curr_desc; /* Current descriptor */ + struct gr_dma_desc *last_desc; /* Last in the chain */ + + u16 evenlen; /* Size of even length head (if oddlen != 0) */ + u16 oddlen; /* Size of odd length tail if buffer length is "odd" */ + + u8 setup; /* Setup packet */ +}; + +enum gr_ep0state { + GR_EP0_DISCONNECT = 0, /* No host */ + GR_EP0_SETUP, /* Between STATUS ack and SETUP report */ + GR_EP0_IDATA, /* IN data stage */ + GR_EP0_ODATA, /* OUT data stage */ + GR_EP0_ISTATUS, /* Status stage after IN data stage */ + GR_EP0_OSTATUS, /* Status stage after OUT data stage */ + GR_EP0_STALL, /* Data or status stages */ + GR_EP0_SUSPEND, /* USB suspend */ +}; + +struct gr_udc { + struct usb_gadget gadget; + struct gr_ep epi[GR_MAXEP]; + struct gr_ep epo[GR_MAXEP]; + struct usb_gadget_driver *driver; + struct dma_pool *desc_pool; + struct device *dev; + + enum gr_ep0state ep0state; + struct gr_request *ep0reqo; + struct gr_request *ep0reqi; + + struct gr_regs __iomem *regs; + int irq; + int irqi; + int irqo; + + unsigned added:1; + unsigned irq_enabled:1; + unsigned remote_wakeup:1; + + u8 test_mode; + + enum usb_device_state suspended_from; + + unsigned int nepi; + unsigned int nepo; + + struct list_head ep_list; + + spinlock_t lock; /* General lock, a.k.a. "dev->lock" in comments */ +}; + +#define to_gr_udc(gadget) (container_of((gadget), struct gr_udc, gadget)) diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c new file mode 100644 index 000000000..fe62db32d --- /dev/null +++ b/drivers/usb/gadget/udc/lpc32xx_udc.c @@ -0,0 +1,3273 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * USB Gadget driver for LPC32xx + * + * Authors: + * Kevin Wells <kevin.wells@nxp.com> + * Mike James + * Roland Stigge <stigge@antcom.de> + * + * Copyright (C) 2006 Philips Semiconductors + * Copyright (C) 2009 NXP Semiconductors + * Copyright (C) 2012 Roland Stigge + * + * Note: This driver is based on original work done by Mike James for + * the LPC3180. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/dmapool.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/prefetch.h> +#include <linux/proc_fs.h> +#include <linux/slab.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/isp1301.h> + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#endif + +/* + * USB device configuration structure + */ +typedef void (*usc_chg_event)(int); +struct lpc32xx_usbd_cfg { + int vbus_drv_pol; /* 0=active low drive for VBUS via ISP1301 */ + usc_chg_event conn_chgb; /* Connection change event (optional) */ + usc_chg_event susp_chgb; /* Suspend/resume event (optional) */ + usc_chg_event rmwk_chgb; /* Enable/disable remote wakeup */ +}; + +/* + * controller driver data structures + */ + +/* 16 endpoints (not to be confused with 32 hardware endpoints) */ +#define NUM_ENDPOINTS 16 + +/* + * IRQ indices make reading the code a little easier + */ +#define IRQ_USB_LP 0 +#define IRQ_USB_HP 1 +#define IRQ_USB_DEVDMA 2 +#define IRQ_USB_ATX 3 + +#define EP_OUT 0 /* RX (from host) */ +#define EP_IN 1 /* TX (to host) */ + +/* Returns the interrupt mask for the selected hardware endpoint */ +#define EP_MASK_SEL(ep, dir) (1 << (((ep) * 2) + dir)) + +#define EP_INT_TYPE 0 +#define EP_ISO_TYPE 1 +#define EP_BLK_TYPE 2 +#define EP_CTL_TYPE 3 + +/* EP0 states */ +#define WAIT_FOR_SETUP 0 /* Wait for setup packet */ +#define DATA_IN 1 /* Expect dev->host transfer */ +#define DATA_OUT 2 /* Expect host->dev transfer */ + +/* DD (DMA Descriptor) structure, requires word alignment, this is already + * defined in the LPC32XX USB device header file, but this version is slightly + * modified to tag some work data with each DMA descriptor. */ +struct lpc32xx_usbd_dd_gad { + u32 dd_next_phy; + u32 dd_setup; + u32 dd_buffer_addr; + u32 dd_status; + u32 dd_iso_ps_mem_addr; + u32 this_dma; + u32 iso_status[6]; /* 5 spare */ + u32 dd_next_v; +}; + +/* + * Logical endpoint structure + */ +struct lpc32xx_ep { + struct usb_ep ep; + struct list_head queue; + struct lpc32xx_udc *udc; + + u32 hwep_num_base; /* Physical hardware EP */ + u32 hwep_num; /* Maps to hardware endpoint */ + u32 maxpacket; + u32 lep; + + bool is_in; + bool req_pending; + u32 eptype; + + u32 totalints; + + bool wedge; +}; + +enum atx_type { + ISP1301, + STOTG04, +}; + +/* + * Common UDC structure + */ +struct lpc32xx_udc { + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + struct platform_device *pdev; + struct device *dev; + spinlock_t lock; + struct i2c_client *isp1301_i2c_client; + + /* Board and device specific */ + struct lpc32xx_usbd_cfg *board; + void __iomem *udp_baseaddr; + int udp_irq[4]; + struct clk *usb_slv_clk; + + /* DMA support */ + u32 *udca_v_base; + u32 udca_p_base; + struct dma_pool *dd_cache; + + /* Common EP and control data */ + u32 enabled_devints; + u32 enabled_hwepints; + u32 dev_status; + u32 realized_eps; + + /* VBUS detection, pullup, and power flags */ + u8 vbus; + u8 last_vbus; + int pullup; + int poweron; + enum atx_type atx; + + /* Work queues related to I2C support */ + struct work_struct pullup_job; + struct work_struct power_job; + + /* USB device peripheral - various */ + struct lpc32xx_ep ep[NUM_ENDPOINTS]; + bool enabled; + bool clocked; + bool suspended; + int ep0state; + atomic_t enabled_ep_cnt; + wait_queue_head_t ep_disable_wait_queue; +}; + +/* + * Endpoint request + */ +struct lpc32xx_request { + struct usb_request req; + struct list_head queue; + struct lpc32xx_usbd_dd_gad *dd_desc_ptr; + bool mapped; + bool send_zlp; +}; + +static inline struct lpc32xx_udc *to_udc(struct usb_gadget *g) +{ + return container_of(g, struct lpc32xx_udc, gadget); +} + +#define ep_dbg(epp, fmt, arg...) \ + dev_dbg(epp->udc->dev, "%s: " fmt, __func__, ## arg) +#define ep_err(epp, fmt, arg...) \ + dev_err(epp->udc->dev, "%s: " fmt, __func__, ## arg) +#define ep_info(epp, fmt, arg...) \ + dev_info(epp->udc->dev, "%s: " fmt, __func__, ## arg) +#define ep_warn(epp, fmt, arg...) \ + dev_warn(epp->udc->dev, "%s:" fmt, __func__, ## arg) + +#define UDCA_BUFF_SIZE (128) + +/********************************************************************** + * USB device controller register offsets + **********************************************************************/ + +#define USBD_DEVINTST(x) ((x) + 0x200) +#define USBD_DEVINTEN(x) ((x) + 0x204) +#define USBD_DEVINTCLR(x) ((x) + 0x208) +#define USBD_DEVINTSET(x) ((x) + 0x20C) +#define USBD_CMDCODE(x) ((x) + 0x210) +#define USBD_CMDDATA(x) ((x) + 0x214) +#define USBD_RXDATA(x) ((x) + 0x218) +#define USBD_TXDATA(x) ((x) + 0x21C) +#define USBD_RXPLEN(x) ((x) + 0x220) +#define USBD_TXPLEN(x) ((x) + 0x224) +#define USBD_CTRL(x) ((x) + 0x228) +#define USBD_DEVINTPRI(x) ((x) + 0x22C) +#define USBD_EPINTST(x) ((x) + 0x230) +#define USBD_EPINTEN(x) ((x) + 0x234) +#define USBD_EPINTCLR(x) ((x) + 0x238) +#define USBD_EPINTSET(x) ((x) + 0x23C) +#define USBD_EPINTPRI(x) ((x) + 0x240) +#define USBD_REEP(x) ((x) + 0x244) +#define USBD_EPIND(x) ((x) + 0x248) +#define USBD_EPMAXPSIZE(x) ((x) + 0x24C) +/* DMA support registers only below */ +/* Set, clear, or get enabled state of the DMA request status. If + * enabled, an IN or OUT token will start a DMA transfer for the EP */ +#define USBD_DMARST(x) ((x) + 0x250) +#define USBD_DMARCLR(x) ((x) + 0x254) +#define USBD_DMARSET(x) ((x) + 0x258) +/* DMA UDCA head pointer */ +#define USBD_UDCAH(x) ((x) + 0x280) +/* EP DMA status, enable, and disable. This is used to specifically + * enabled or disable DMA for a specific EP */ +#define USBD_EPDMAST(x) ((x) + 0x284) +#define USBD_EPDMAEN(x) ((x) + 0x288) +#define USBD_EPDMADIS(x) ((x) + 0x28C) +/* DMA master interrupts enable and pending interrupts */ +#define USBD_DMAINTST(x) ((x) + 0x290) +#define USBD_DMAINTEN(x) ((x) + 0x294) +/* DMA end of transfer interrupt enable, disable, status */ +#define USBD_EOTINTST(x) ((x) + 0x2A0) +#define USBD_EOTINTCLR(x) ((x) + 0x2A4) +#define USBD_EOTINTSET(x) ((x) + 0x2A8) +/* New DD request interrupt enable, disable, status */ +#define USBD_NDDRTINTST(x) ((x) + 0x2AC) +#define USBD_NDDRTINTCLR(x) ((x) + 0x2B0) +#define USBD_NDDRTINTSET(x) ((x) + 0x2B4) +/* DMA error interrupt enable, disable, status */ +#define USBD_SYSERRTINTST(x) ((x) + 0x2B8) +#define USBD_SYSERRTINTCLR(x) ((x) + 0x2BC) +#define USBD_SYSERRTINTSET(x) ((x) + 0x2C0) + +/********************************************************************** + * USBD_DEVINTST/USBD_DEVINTEN/USBD_DEVINTCLR/USBD_DEVINTSET/ + * USBD_DEVINTPRI register definitions + **********************************************************************/ +#define USBD_ERR_INT (1 << 9) +#define USBD_EP_RLZED (1 << 8) +#define USBD_TXENDPKT (1 << 7) +#define USBD_RXENDPKT (1 << 6) +#define USBD_CDFULL (1 << 5) +#define USBD_CCEMPTY (1 << 4) +#define USBD_DEV_STAT (1 << 3) +#define USBD_EP_SLOW (1 << 2) +#define USBD_EP_FAST (1 << 1) +#define USBD_FRAME (1 << 0) + +/********************************************************************** + * USBD_EPINTST/USBD_EPINTEN/USBD_EPINTCLR/USBD_EPINTSET/ + * USBD_EPINTPRI register definitions + **********************************************************************/ +/* End point selection macro (RX) */ +#define USBD_RX_EP_SEL(e) (1 << ((e) << 1)) + +/* End point selection macro (TX) */ +#define USBD_TX_EP_SEL(e) (1 << (((e) << 1) + 1)) + +/********************************************************************** + * USBD_REEP/USBD_DMARST/USBD_DMARCLR/USBD_DMARSET/USBD_EPDMAST/ + * USBD_EPDMAEN/USBD_EPDMADIS/ + * USBD_NDDRTINTST/USBD_NDDRTINTCLR/USBD_NDDRTINTSET/ + * USBD_EOTINTST/USBD_EOTINTCLR/USBD_EOTINTSET/ + * USBD_SYSERRTINTST/USBD_SYSERRTINTCLR/USBD_SYSERRTINTSET + * register definitions + **********************************************************************/ +/* Endpoint selection macro */ +#define USBD_EP_SEL(e) (1 << (e)) + +/********************************************************************** + * SBD_DMAINTST/USBD_DMAINTEN + **********************************************************************/ +#define USBD_SYS_ERR_INT (1 << 2) +#define USBD_NEW_DD_INT (1 << 1) +#define USBD_EOT_INT (1 << 0) + +/********************************************************************** + * USBD_RXPLEN register definitions + **********************************************************************/ +#define USBD_PKT_RDY (1 << 11) +#define USBD_DV (1 << 10) +#define USBD_PK_LEN_MASK 0x3FF + +/********************************************************************** + * USBD_CTRL register definitions + **********************************************************************/ +#define USBD_LOG_ENDPOINT(e) ((e) << 2) +#define USBD_WR_EN (1 << 1) +#define USBD_RD_EN (1 << 0) + +/********************************************************************** + * USBD_CMDCODE register definitions + **********************************************************************/ +#define USBD_CMD_CODE(c) ((c) << 16) +#define USBD_CMD_PHASE(p) ((p) << 8) + +/********************************************************************** + * USBD_DMARST/USBD_DMARCLR/USBD_DMARSET register definitions + **********************************************************************/ +#define USBD_DMAEP(e) (1 << (e)) + +/* DD (DMA Descriptor) structure, requires word alignment */ +struct lpc32xx_usbd_dd { + u32 *dd_next; + u32 dd_setup; + u32 dd_buffer_addr; + u32 dd_status; + u32 dd_iso_ps_mem_addr; +}; + +/* dd_setup bit defines */ +#define DD_SETUP_ATLE_DMA_MODE 0x01 +#define DD_SETUP_NEXT_DD_VALID 0x04 +#define DD_SETUP_ISO_EP 0x10 +#define DD_SETUP_PACKETLEN(n) (((n) & 0x7FF) << 5) +#define DD_SETUP_DMALENBYTES(n) (((n) & 0xFFFF) << 16) + +/* dd_status bit defines */ +#define DD_STATUS_DD_RETIRED 0x01 +#define DD_STATUS_STS_MASK 0x1E +#define DD_STATUS_STS_NS 0x00 /* Not serviced */ +#define DD_STATUS_STS_BS 0x02 /* Being serviced */ +#define DD_STATUS_STS_NC 0x04 /* Normal completion */ +#define DD_STATUS_STS_DUR 0x06 /* Data underrun (short packet) */ +#define DD_STATUS_STS_DOR 0x08 /* Data overrun */ +#define DD_STATUS_STS_SE 0x12 /* System error */ +#define DD_STATUS_PKT_VAL 0x20 /* Packet valid */ +#define DD_STATUS_LSB_EX 0x40 /* LS byte extracted (ATLE) */ +#define DD_STATUS_MSB_EX 0x80 /* MS byte extracted (ATLE) */ +#define DD_STATUS_MLEN(n) (((n) >> 8) & 0x3F) +#define DD_STATUS_CURDMACNT(n) (((n) >> 16) & 0xFFFF) + +/* + * + * Protocol engine bits below + * + */ +/* Device Interrupt Bit Definitions */ +#define FRAME_INT 0x00000001 +#define EP_FAST_INT 0x00000002 +#define EP_SLOW_INT 0x00000004 +#define DEV_STAT_INT 0x00000008 +#define CCEMTY_INT 0x00000010 +#define CDFULL_INT 0x00000020 +#define RxENDPKT_INT 0x00000040 +#define TxENDPKT_INT 0x00000080 +#define EP_RLZED_INT 0x00000100 +#define ERR_INT 0x00000200 + +/* Rx & Tx Packet Length Definitions */ +#define PKT_LNGTH_MASK 0x000003FF +#define PKT_DV 0x00000400 +#define PKT_RDY 0x00000800 + +/* USB Control Definitions */ +#define CTRL_RD_EN 0x00000001 +#define CTRL_WR_EN 0x00000002 + +/* Command Codes */ +#define CMD_SET_ADDR 0x00D00500 +#define CMD_CFG_DEV 0x00D80500 +#define CMD_SET_MODE 0x00F30500 +#define CMD_RD_FRAME 0x00F50500 +#define DAT_RD_FRAME 0x00F50200 +#define CMD_RD_TEST 0x00FD0500 +#define DAT_RD_TEST 0x00FD0200 +#define CMD_SET_DEV_STAT 0x00FE0500 +#define CMD_GET_DEV_STAT 0x00FE0500 +#define DAT_GET_DEV_STAT 0x00FE0200 +#define CMD_GET_ERR_CODE 0x00FF0500 +#define DAT_GET_ERR_CODE 0x00FF0200 +#define CMD_RD_ERR_STAT 0x00FB0500 +#define DAT_RD_ERR_STAT 0x00FB0200 +#define DAT_WR_BYTE(x) (0x00000100 | ((x) << 16)) +#define CMD_SEL_EP(x) (0x00000500 | ((x) << 16)) +#define DAT_SEL_EP(x) (0x00000200 | ((x) << 16)) +#define CMD_SEL_EP_CLRI(x) (0x00400500 | ((x) << 16)) +#define DAT_SEL_EP_CLRI(x) (0x00400200 | ((x) << 16)) +#define CMD_SET_EP_STAT(x) (0x00400500 | ((x) << 16)) +#define CMD_CLR_BUF 0x00F20500 +#define DAT_CLR_BUF 0x00F20200 +#define CMD_VALID_BUF 0x00FA0500 + +/* Device Address Register Definitions */ +#define DEV_ADDR_MASK 0x7F +#define DEV_EN 0x80 + +/* Device Configure Register Definitions */ +#define CONF_DVICE 0x01 + +/* Device Mode Register Definitions */ +#define AP_CLK 0x01 +#define INAK_CI 0x02 +#define INAK_CO 0x04 +#define INAK_II 0x08 +#define INAK_IO 0x10 +#define INAK_BI 0x20 +#define INAK_BO 0x40 + +/* Device Status Register Definitions */ +#define DEV_CON 0x01 +#define DEV_CON_CH 0x02 +#define DEV_SUS 0x04 +#define DEV_SUS_CH 0x08 +#define DEV_RST 0x10 + +/* Error Code Register Definitions */ +#define ERR_EC_MASK 0x0F +#define ERR_EA 0x10 + +/* Error Status Register Definitions */ +#define ERR_PID 0x01 +#define ERR_UEPKT 0x02 +#define ERR_DCRC 0x04 +#define ERR_TIMOUT 0x08 +#define ERR_EOP 0x10 +#define ERR_B_OVRN 0x20 +#define ERR_BTSTF 0x40 +#define ERR_TGL 0x80 + +/* Endpoint Select Register Definitions */ +#define EP_SEL_F 0x01 +#define EP_SEL_ST 0x02 +#define EP_SEL_STP 0x04 +#define EP_SEL_PO 0x08 +#define EP_SEL_EPN 0x10 +#define EP_SEL_B_1_FULL 0x20 +#define EP_SEL_B_2_FULL 0x40 + +/* Endpoint Status Register Definitions */ +#define EP_STAT_ST 0x01 +#define EP_STAT_DA 0x20 +#define EP_STAT_RF_MO 0x40 +#define EP_STAT_CND_ST 0x80 + +/* Clear Buffer Register Definitions */ +#define CLR_BUF_PO 0x01 + +/* DMA Interrupt Bit Definitions */ +#define EOT_INT 0x01 +#define NDD_REQ_INT 0x02 +#define SYS_ERR_INT 0x04 + +#define DRIVER_VERSION "1.03" +static const char driver_name[] = "lpc32xx_udc"; + +/* + * + * proc interface support + * + */ +#ifdef CONFIG_USB_GADGET_DEBUG_FILES +static char *epnames[] = {"INT", "ISO", "BULK", "CTRL"}; +static const char debug_filename[] = "driver/udc"; + +static void proc_ep_show(struct seq_file *s, struct lpc32xx_ep *ep) +{ + struct lpc32xx_request *req; + + seq_printf(s, "\n"); + seq_printf(s, "%12s, maxpacket %4d %3s", + ep->ep.name, ep->ep.maxpacket, + ep->is_in ? "in" : "out"); + seq_printf(s, " type %4s", epnames[ep->eptype]); + seq_printf(s, " ints: %12d", ep->totalints); + + if (list_empty(&ep->queue)) + seq_printf(s, "\t(queue empty)\n"); + else { + list_for_each_entry(req, &ep->queue, queue) { + u32 length = req->req.actual; + + seq_printf(s, "\treq %p len %d/%d buf %p\n", + &req->req, length, + req->req.length, req->req.buf); + } + } +} + +static int udc_show(struct seq_file *s, void *unused) +{ + struct lpc32xx_udc *udc = s->private; + struct lpc32xx_ep *ep; + unsigned long flags; + + seq_printf(s, "%s: version %s\n", driver_name, DRIVER_VERSION); + + spin_lock_irqsave(&udc->lock, flags); + + seq_printf(s, "vbus %s, pullup %s, %s powered%s, gadget %s\n\n", + udc->vbus ? "present" : "off", + udc->enabled ? (udc->vbus ? "active" : "enabled") : + "disabled", + udc->gadget.is_selfpowered ? "self" : "VBUS", + udc->suspended ? ", suspended" : "", + udc->driver ? udc->driver->driver.name : "(none)"); + + if (udc->enabled && udc->vbus) { + proc_ep_show(s, &udc->ep[0]); + list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) + proc_ep_show(s, ep); + } + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(udc); + +static void create_debug_file(struct lpc32xx_udc *udc) +{ + debugfs_create_file(debug_filename, 0, NULL, udc, &udc_fops); +} + +static void remove_debug_file(struct lpc32xx_udc *udc) +{ + debugfs_lookup_and_remove(debug_filename, NULL); +} + +#else +static inline void create_debug_file(struct lpc32xx_udc *udc) {} +static inline void remove_debug_file(struct lpc32xx_udc *udc) {} +#endif + +/* Primary initialization sequence for the ISP1301 transceiver */ +static void isp1301_udc_configure(struct lpc32xx_udc *udc) +{ + u8 value; + s32 vendor, product; + + vendor = i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x00); + product = i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x02); + + if (vendor == 0x0483 && product == 0xa0c4) + udc->atx = STOTG04; + + /* LPC32XX only supports DAT_SE0 USB mode */ + /* This sequence is important */ + + /* Disable transparent UART mode first */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), + MC1_UART_EN); + + /* Set full speed and SE0 mode */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0); + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_1, (MC1_SPEED_REG | MC1_DAT_SE0)); + + /* + * The PSW_OE enable bit state is reversed in the ISP1301 User's Guide + */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + (ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR), ~0); + + value = MC2_BI_DI; + if (udc->atx != STOTG04) + value |= MC2_SPD_SUSP_CTRL; + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_2, value); + + /* Driver VBUS_DRV high or low depending on board setup */ + if (udc->board->vbus_drv_pol != 0) + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DRV); + else + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR, + OTG1_VBUS_DRV); + + /* Bi-directional mode with suspend control + * Enable both pulldowns for now - the pullup will be enable when VBUS + * is detected */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0); + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1, + (0 | OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN)); + + /* Discharge VBUS (just in case) */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DISCHRG); + msleep(1); + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), + OTG1_VBUS_DISCHRG); + + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, ~0); + + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR, ~0); + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0); + + dev_info(udc->dev, "ISP1301 Vendor ID : 0x%04x\n", vendor); + dev_info(udc->dev, "ISP1301 Product ID : 0x%04x\n", product); + dev_info(udc->dev, "ISP1301 Version ID : 0x%04x\n", + i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x14)); + +} + +/* Enables or disables the USB device pullup via the ISP1301 transceiver */ +static void isp1301_pullup_set(struct lpc32xx_udc *udc) +{ + if (udc->pullup) + /* Enable pullup for bus signalling */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1, OTG1_DP_PULLUP); + else + /* Enable pullup for bus signalling */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR, + OTG1_DP_PULLUP); +} + +static void pullup_work(struct work_struct *work) +{ + struct lpc32xx_udc *udc = + container_of(work, struct lpc32xx_udc, pullup_job); + + isp1301_pullup_set(udc); +} + +static void isp1301_pullup_enable(struct lpc32xx_udc *udc, int en_pullup, + int block) +{ + if (en_pullup == udc->pullup) + return; + + udc->pullup = en_pullup; + if (block) + isp1301_pullup_set(udc); + else + /* defer slow i2c pull up setting */ + schedule_work(&udc->pullup_job); +} + +#ifdef CONFIG_PM +/* Powers up or down the ISP1301 transceiver */ +static void isp1301_set_powerstate(struct lpc32xx_udc *udc, int enable) +{ + /* There is no "global power down" register for stotg04 */ + if (udc->atx == STOTG04) + return; + + if (enable != 0) + /* Power up ISP1301 - this ISP1301 will automatically wakeup + when VBUS is detected */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR, + MC2_GLOBAL_PWR_DN); + else + /* Power down ISP1301 */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN); +} + +static void power_work(struct work_struct *work) +{ + struct lpc32xx_udc *udc = + container_of(work, struct lpc32xx_udc, power_job); + + isp1301_set_powerstate(udc, udc->poweron); +} +#endif + +/* + * + * USB protocol engine command/data read/write helper functions + * + */ +/* Issues a single command to the USB device state machine */ +static void udc_protocol_cmd_w(struct lpc32xx_udc *udc, u32 cmd) +{ + u32 pass = 0; + int to; + + /* EP may lock on CLRI if this read isn't done */ + u32 tmp = readl(USBD_DEVINTST(udc->udp_baseaddr)); + (void) tmp; + + while (pass == 0) { + writel(USBD_CCEMPTY, USBD_DEVINTCLR(udc->udp_baseaddr)); + + /* Write command code */ + writel(cmd, USBD_CMDCODE(udc->udp_baseaddr)); + to = 10000; + while (((readl(USBD_DEVINTST(udc->udp_baseaddr)) & + USBD_CCEMPTY) == 0) && (to > 0)) { + to--; + } + + if (to > 0) + pass = 1; + + cpu_relax(); + } +} + +/* Issues 2 commands (or command and data) to the USB device state machine */ +static inline void udc_protocol_cmd_data_w(struct lpc32xx_udc *udc, u32 cmd, + u32 data) +{ + udc_protocol_cmd_w(udc, cmd); + udc_protocol_cmd_w(udc, data); +} + +/* Issues a single command to the USB device state machine and reads + * response data */ +static u32 udc_protocol_cmd_r(struct lpc32xx_udc *udc, u32 cmd) +{ + int to = 1000; + + /* Write a command and read data from the protocol engine */ + writel((USBD_CDFULL | USBD_CCEMPTY), + USBD_DEVINTCLR(udc->udp_baseaddr)); + + /* Write command code */ + udc_protocol_cmd_w(udc, cmd); + + while ((!(readl(USBD_DEVINTST(udc->udp_baseaddr)) & USBD_CDFULL)) + && (to > 0)) + to--; + if (!to) + dev_dbg(udc->dev, + "Protocol engine didn't receive response (CDFULL)\n"); + + return readl(USBD_CMDDATA(udc->udp_baseaddr)); +} + +/* + * + * USB device interrupt mask support functions + * + */ +/* Enable one or more USB device interrupts */ +static inline void uda_enable_devint(struct lpc32xx_udc *udc, u32 devmask) +{ + udc->enabled_devints |= devmask; + writel(udc->enabled_devints, USBD_DEVINTEN(udc->udp_baseaddr)); +} + +/* Disable one or more USB device interrupts */ +static inline void uda_disable_devint(struct lpc32xx_udc *udc, u32 mask) +{ + udc->enabled_devints &= ~mask; + writel(udc->enabled_devints, USBD_DEVINTEN(udc->udp_baseaddr)); +} + +/* Clear one or more USB device interrupts */ +static inline void uda_clear_devint(struct lpc32xx_udc *udc, u32 mask) +{ + writel(mask, USBD_DEVINTCLR(udc->udp_baseaddr)); +} + +/* + * + * Endpoint interrupt disable/enable functions + * + */ +/* Enable one or more USB endpoint interrupts */ +static void uda_enable_hwepint(struct lpc32xx_udc *udc, u32 hwep) +{ + udc->enabled_hwepints |= (1 << hwep); + writel(udc->enabled_hwepints, USBD_EPINTEN(udc->udp_baseaddr)); +} + +/* Disable one or more USB endpoint interrupts */ +static void uda_disable_hwepint(struct lpc32xx_udc *udc, u32 hwep) +{ + udc->enabled_hwepints &= ~(1 << hwep); + writel(udc->enabled_hwepints, USBD_EPINTEN(udc->udp_baseaddr)); +} + +/* Clear one or more USB endpoint interrupts */ +static inline void uda_clear_hwepint(struct lpc32xx_udc *udc, u32 hwep) +{ + writel((1 << hwep), USBD_EPINTCLR(udc->udp_baseaddr)); +} + +/* Enable DMA for the HW channel */ +static inline void udc_ep_dma_enable(struct lpc32xx_udc *udc, u32 hwep) +{ + writel((1 << hwep), USBD_EPDMAEN(udc->udp_baseaddr)); +} + +/* Disable DMA for the HW channel */ +static inline void udc_ep_dma_disable(struct lpc32xx_udc *udc, u32 hwep) +{ + writel((1 << hwep), USBD_EPDMADIS(udc->udp_baseaddr)); +} + +/* + * + * Endpoint realize/unrealize functions + * + */ +/* Before an endpoint can be used, it needs to be realized + * in the USB protocol engine - this realizes the endpoint. + * The interrupt (FIFO or DMA) is not enabled with this function */ +static void udc_realize_hwep(struct lpc32xx_udc *udc, u32 hwep, + u32 maxpacket) +{ + int to = 1000; + + writel(USBD_EP_RLZED, USBD_DEVINTCLR(udc->udp_baseaddr)); + writel(hwep, USBD_EPIND(udc->udp_baseaddr)); + udc->realized_eps |= (1 << hwep); + writel(udc->realized_eps, USBD_REEP(udc->udp_baseaddr)); + writel(maxpacket, USBD_EPMAXPSIZE(udc->udp_baseaddr)); + + /* Wait until endpoint is realized in hardware */ + while ((!(readl(USBD_DEVINTST(udc->udp_baseaddr)) & + USBD_EP_RLZED)) && (to > 0)) + to--; + if (!to) + dev_dbg(udc->dev, "EP not correctly realized in hardware\n"); + + writel(USBD_EP_RLZED, USBD_DEVINTCLR(udc->udp_baseaddr)); +} + +/* Unrealize an EP */ +static void udc_unrealize_hwep(struct lpc32xx_udc *udc, u32 hwep) +{ + udc->realized_eps &= ~(1 << hwep); + writel(udc->realized_eps, USBD_REEP(udc->udp_baseaddr)); +} + +/* + * + * Endpoint support functions + * + */ +/* Select and clear endpoint interrupt */ +static u32 udc_selep_clrint(struct lpc32xx_udc *udc, u32 hwep) +{ + udc_protocol_cmd_w(udc, CMD_SEL_EP_CLRI(hwep)); + return udc_protocol_cmd_r(udc, DAT_SEL_EP_CLRI(hwep)); +} + +/* Disables the endpoint in the USB protocol engine */ +static void udc_disable_hwep(struct lpc32xx_udc *udc, u32 hwep) +{ + udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(hwep), + DAT_WR_BYTE(EP_STAT_DA)); +} + +/* Stalls the endpoint - endpoint will return STALL */ +static void udc_stall_hwep(struct lpc32xx_udc *udc, u32 hwep) +{ + udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(hwep), + DAT_WR_BYTE(EP_STAT_ST)); +} + +/* Clear stall or reset endpoint */ +static void udc_clrstall_hwep(struct lpc32xx_udc *udc, u32 hwep) +{ + udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(hwep), + DAT_WR_BYTE(0)); +} + +/* Select an endpoint for endpoint status, clear, validate */ +static void udc_select_hwep(struct lpc32xx_udc *udc, u32 hwep) +{ + udc_protocol_cmd_w(udc, CMD_SEL_EP(hwep)); +} + +/* + * + * Endpoint buffer management functions + * + */ +/* Clear the current endpoint's buffer */ +static void udc_clr_buffer_hwep(struct lpc32xx_udc *udc, u32 hwep) +{ + udc_select_hwep(udc, hwep); + udc_protocol_cmd_w(udc, CMD_CLR_BUF); +} + +/* Validate the current endpoint's buffer */ +static void udc_val_buffer_hwep(struct lpc32xx_udc *udc, u32 hwep) +{ + udc_select_hwep(udc, hwep); + udc_protocol_cmd_w(udc, CMD_VALID_BUF); +} + +static inline u32 udc_clearep_getsts(struct lpc32xx_udc *udc, u32 hwep) +{ + /* Clear EP interrupt */ + uda_clear_hwepint(udc, hwep); + return udc_selep_clrint(udc, hwep); +} + +/* + * + * USB EP DMA support + * + */ +/* Allocate a DMA Descriptor */ +static struct lpc32xx_usbd_dd_gad *udc_dd_alloc(struct lpc32xx_udc *udc) +{ + dma_addr_t dma; + struct lpc32xx_usbd_dd_gad *dd; + + dd = dma_pool_alloc(udc->dd_cache, GFP_ATOMIC | GFP_DMA, &dma); + if (dd) + dd->this_dma = dma; + + return dd; +} + +/* Free a DMA Descriptor */ +static void udc_dd_free(struct lpc32xx_udc *udc, struct lpc32xx_usbd_dd_gad *dd) +{ + dma_pool_free(udc->dd_cache, dd, dd->this_dma); +} + +/* + * + * USB setup and shutdown functions + * + */ +/* Enables or disables most of the USB system clocks when low power mode is + * needed. Clocks are typically started on a connection event, and disabled + * when a cable is disconnected */ +static void udc_clk_set(struct lpc32xx_udc *udc, int enable) +{ + if (enable != 0) { + if (udc->clocked) + return; + + udc->clocked = 1; + clk_prepare_enable(udc->usb_slv_clk); + } else { + if (!udc->clocked) + return; + + udc->clocked = 0; + clk_disable_unprepare(udc->usb_slv_clk); + } +} + +/* Set/reset USB device address */ +static void udc_set_address(struct lpc32xx_udc *udc, u32 addr) +{ + /* Address will be latched at the end of the status phase, or + latched immediately if function is called twice */ + udc_protocol_cmd_data_w(udc, CMD_SET_ADDR, + DAT_WR_BYTE(DEV_EN | addr)); +} + +/* Setup up a IN request for DMA transfer - this consists of determining the + * list of DMA addresses for the transfer, allocating DMA Descriptors, + * installing the DD into the UDCA, and then enabling the DMA for that EP */ +static int udc_ep_in_req_dma(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep) +{ + struct lpc32xx_request *req; + u32 hwep = ep->hwep_num; + + ep->req_pending = 1; + + /* There will always be a request waiting here */ + req = list_entry(ep->queue.next, struct lpc32xx_request, queue); + + /* Place the DD Descriptor into the UDCA */ + udc->udca_v_base[hwep] = req->dd_desc_ptr->this_dma; + + /* Enable DMA and interrupt for the HW EP */ + udc_ep_dma_enable(udc, hwep); + + /* Clear ZLP if last packet is not of MAXP size */ + if (req->req.length % ep->ep.maxpacket) + req->send_zlp = 0; + + return 0; +} + +/* Setup up a OUT request for DMA transfer - this consists of determining the + * list of DMA addresses for the transfer, allocating DMA Descriptors, + * installing the DD into the UDCA, and then enabling the DMA for that EP */ +static int udc_ep_out_req_dma(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep) +{ + struct lpc32xx_request *req; + u32 hwep = ep->hwep_num; + + ep->req_pending = 1; + + /* There will always be a request waiting here */ + req = list_entry(ep->queue.next, struct lpc32xx_request, queue); + + /* Place the DD Descriptor into the UDCA */ + udc->udca_v_base[hwep] = req->dd_desc_ptr->this_dma; + + /* Enable DMA and interrupt for the HW EP */ + udc_ep_dma_enable(udc, hwep); + return 0; +} + +static void udc_disable(struct lpc32xx_udc *udc) +{ + u32 i; + + /* Disable device */ + udc_protocol_cmd_data_w(udc, CMD_CFG_DEV, DAT_WR_BYTE(0)); + udc_protocol_cmd_data_w(udc, CMD_SET_DEV_STAT, DAT_WR_BYTE(0)); + + /* Disable all device interrupts (including EP0) */ + uda_disable_devint(udc, 0x3FF); + + /* Disable and reset all endpoint interrupts */ + for (i = 0; i < 32; i++) { + uda_disable_hwepint(udc, i); + uda_clear_hwepint(udc, i); + udc_disable_hwep(udc, i); + udc_unrealize_hwep(udc, i); + udc->udca_v_base[i] = 0; + + /* Disable and clear all interrupts and DMA */ + udc_ep_dma_disable(udc, i); + writel((1 << i), USBD_EOTINTCLR(udc->udp_baseaddr)); + writel((1 << i), USBD_NDDRTINTCLR(udc->udp_baseaddr)); + writel((1 << i), USBD_SYSERRTINTCLR(udc->udp_baseaddr)); + writel((1 << i), USBD_DMARCLR(udc->udp_baseaddr)); + } + + /* Disable DMA interrupts */ + writel(0, USBD_DMAINTEN(udc->udp_baseaddr)); + + writel(0, USBD_UDCAH(udc->udp_baseaddr)); +} + +static void udc_enable(struct lpc32xx_udc *udc) +{ + u32 i; + struct lpc32xx_ep *ep = &udc->ep[0]; + + /* Start with known state */ + udc_disable(udc); + + /* Enable device */ + udc_protocol_cmd_data_w(udc, CMD_SET_DEV_STAT, DAT_WR_BYTE(DEV_CON)); + + /* EP interrupts on high priority, FRAME interrupt on low priority */ + writel(USBD_EP_FAST, USBD_DEVINTPRI(udc->udp_baseaddr)); + writel(0xFFFF, USBD_EPINTPRI(udc->udp_baseaddr)); + + /* Clear any pending device interrupts */ + writel(0x3FF, USBD_DEVINTCLR(udc->udp_baseaddr)); + + /* Setup UDCA - not yet used (DMA) */ + writel(udc->udca_p_base, USBD_UDCAH(udc->udp_baseaddr)); + + /* Only enable EP0 in and out for now, EP0 only works in FIFO mode */ + for (i = 0; i <= 1; i++) { + udc_realize_hwep(udc, i, ep->ep.maxpacket); + uda_enable_hwepint(udc, i); + udc_select_hwep(udc, i); + udc_clrstall_hwep(udc, i); + udc_clr_buffer_hwep(udc, i); + } + + /* Device interrupt setup */ + uda_clear_devint(udc, (USBD_ERR_INT | USBD_DEV_STAT | USBD_EP_SLOW | + USBD_EP_FAST)); + uda_enable_devint(udc, (USBD_ERR_INT | USBD_DEV_STAT | USBD_EP_SLOW | + USBD_EP_FAST)); + + /* Set device address to 0 - called twice to force a latch in the USB + engine without the need of a setup packet status closure */ + udc_set_address(udc, 0); + udc_set_address(udc, 0); + + /* Enable master DMA interrupts */ + writel((USBD_SYS_ERR_INT | USBD_EOT_INT), + USBD_DMAINTEN(udc->udp_baseaddr)); + + udc->dev_status = 0; +} + +/* + * + * USB device board specific events handled via callbacks + * + */ +/* Connection change event - notify board function of change */ +static void uda_power_event(struct lpc32xx_udc *udc, u32 conn) +{ + /* Just notify of a connection change event (optional) */ + if (udc->board->conn_chgb != NULL) + udc->board->conn_chgb(conn); +} + +/* Suspend/resume event - notify board function of change */ +static void uda_resm_susp_event(struct lpc32xx_udc *udc, u32 conn) +{ + /* Just notify of a Suspend/resume change event (optional) */ + if (udc->board->susp_chgb != NULL) + udc->board->susp_chgb(conn); + + if (conn) + udc->suspended = 0; + else + udc->suspended = 1; +} + +/* Remote wakeup enable/disable - notify board function of change */ +static void uda_remwkp_cgh(struct lpc32xx_udc *udc) +{ + if (udc->board->rmwk_chgb != NULL) + udc->board->rmwk_chgb(udc->dev_status & + (1 << USB_DEVICE_REMOTE_WAKEUP)); +} + +/* Reads data from FIFO, adjusts for alignment and data size */ +static void udc_pop_fifo(struct lpc32xx_udc *udc, u8 *data, u32 bytes) +{ + int n, i, bl; + u16 *p16; + u32 *p32, tmp, cbytes; + + /* Use optimal data transfer method based on source address and size */ + switch (((uintptr_t) data) & 0x3) { + case 0: /* 32-bit aligned */ + p32 = (u32 *) data; + cbytes = (bytes & ~0x3); + + /* Copy 32-bit aligned data first */ + for (n = 0; n < cbytes; n += 4) + *p32++ = readl(USBD_RXDATA(udc->udp_baseaddr)); + + /* Handle any remaining bytes */ + bl = bytes - cbytes; + if (bl) { + tmp = readl(USBD_RXDATA(udc->udp_baseaddr)); + for (n = 0; n < bl; n++) + data[cbytes + n] = ((tmp >> (n * 8)) & 0xFF); + + } + break; + + case 1: /* 8-bit aligned */ + case 3: + /* Each byte has to be handled independently */ + for (n = 0; n < bytes; n += 4) { + tmp = readl(USBD_RXDATA(udc->udp_baseaddr)); + + bl = bytes - n; + if (bl > 4) + bl = 4; + + for (i = 0; i < bl; i++) + data[n + i] = (u8) ((tmp >> (i * 8)) & 0xFF); + } + break; + + case 2: /* 16-bit aligned */ + p16 = (u16 *) data; + cbytes = (bytes & ~0x3); + + /* Copy 32-bit sized objects first with 16-bit alignment */ + for (n = 0; n < cbytes; n += 4) { + tmp = readl(USBD_RXDATA(udc->udp_baseaddr)); + *p16++ = (u16)(tmp & 0xFFFF); + *p16++ = (u16)((tmp >> 16) & 0xFFFF); + } + + /* Handle any remaining bytes */ + bl = bytes - cbytes; + if (bl) { + tmp = readl(USBD_RXDATA(udc->udp_baseaddr)); + for (n = 0; n < bl; n++) + data[cbytes + n] = ((tmp >> (n * 8)) & 0xFF); + } + break; + } +} + +/* Read data from the FIFO for an endpoint. This function is for endpoints (such + * as EP0) that don't use DMA. This function should only be called if a packet + * is known to be ready to read for the endpoint. Note that the endpoint must + * be selected in the protocol engine prior to this call. */ +static u32 udc_read_hwep(struct lpc32xx_udc *udc, u32 hwep, u32 *data, + u32 bytes) +{ + u32 tmpv; + int to = 1000; + u32 tmp, hwrep = ((hwep & 0x1E) << 1) | CTRL_RD_EN; + + /* Setup read of endpoint */ + writel(hwrep, USBD_CTRL(udc->udp_baseaddr)); + + /* Wait until packet is ready */ + while ((((tmpv = readl(USBD_RXPLEN(udc->udp_baseaddr))) & + PKT_RDY) == 0) && (to > 0)) + to--; + if (!to) + dev_dbg(udc->dev, "No packet ready on FIFO EP read\n"); + + /* Mask out count */ + tmp = tmpv & PKT_LNGTH_MASK; + if (bytes < tmp) + tmp = bytes; + + if ((tmp > 0) && (data != NULL)) + udc_pop_fifo(udc, (u8 *) data, tmp); + + writel(((hwep & 0x1E) << 1), USBD_CTRL(udc->udp_baseaddr)); + + /* Clear the buffer */ + udc_clr_buffer_hwep(udc, hwep); + + return tmp; +} + +/* Stuffs data into the FIFO, adjusts for alignment and data size */ +static void udc_stuff_fifo(struct lpc32xx_udc *udc, u8 *data, u32 bytes) +{ + int n, i, bl; + u16 *p16; + u32 *p32, tmp, cbytes; + + /* Use optimal data transfer method based on source address and size */ + switch (((uintptr_t) data) & 0x3) { + case 0: /* 32-bit aligned */ + p32 = (u32 *) data; + cbytes = (bytes & ~0x3); + + /* Copy 32-bit aligned data first */ + for (n = 0; n < cbytes; n += 4) + writel(*p32++, USBD_TXDATA(udc->udp_baseaddr)); + + /* Handle any remaining bytes */ + bl = bytes - cbytes; + if (bl) { + tmp = 0; + for (n = 0; n < bl; n++) + tmp |= data[cbytes + n] << (n * 8); + + writel(tmp, USBD_TXDATA(udc->udp_baseaddr)); + } + break; + + case 1: /* 8-bit aligned */ + case 3: + /* Each byte has to be handled independently */ + for (n = 0; n < bytes; n += 4) { + bl = bytes - n; + if (bl > 4) + bl = 4; + + tmp = 0; + for (i = 0; i < bl; i++) + tmp |= data[n + i] << (i * 8); + + writel(tmp, USBD_TXDATA(udc->udp_baseaddr)); + } + break; + + case 2: /* 16-bit aligned */ + p16 = (u16 *) data; + cbytes = (bytes & ~0x3); + + /* Copy 32-bit aligned data first */ + for (n = 0; n < cbytes; n += 4) { + tmp = *p16++ & 0xFFFF; + tmp |= (*p16++ & 0xFFFF) << 16; + writel(tmp, USBD_TXDATA(udc->udp_baseaddr)); + } + + /* Handle any remaining bytes */ + bl = bytes - cbytes; + if (bl) { + tmp = 0; + for (n = 0; n < bl; n++) + tmp |= data[cbytes + n] << (n * 8); + + writel(tmp, USBD_TXDATA(udc->udp_baseaddr)); + } + break; + } +} + +/* Write data to the FIFO for an endpoint. This function is for endpoints (such + * as EP0) that don't use DMA. Note that the endpoint must be selected in the + * protocol engine prior to this call. */ +static void udc_write_hwep(struct lpc32xx_udc *udc, u32 hwep, u32 *data, + u32 bytes) +{ + u32 hwwep = ((hwep & 0x1E) << 1) | CTRL_WR_EN; + + if ((bytes > 0) && (data == NULL)) + return; + + /* Setup write of endpoint */ + writel(hwwep, USBD_CTRL(udc->udp_baseaddr)); + + writel(bytes, USBD_TXPLEN(udc->udp_baseaddr)); + + /* Need at least 1 byte to trigger TX */ + if (bytes == 0) + writel(0, USBD_TXDATA(udc->udp_baseaddr)); + else + udc_stuff_fifo(udc, (u8 *) data, bytes); + + writel(((hwep & 0x1E) << 1), USBD_CTRL(udc->udp_baseaddr)); + + udc_val_buffer_hwep(udc, hwep); +} + +/* USB device reset - resets USB to a default state with just EP0 + enabled */ +static void uda_usb_reset(struct lpc32xx_udc *udc) +{ + u32 i = 0; + /* Re-init device controller and EP0 */ + udc_enable(udc); + udc->gadget.speed = USB_SPEED_FULL; + + for (i = 1; i < NUM_ENDPOINTS; i++) { + struct lpc32xx_ep *ep = &udc->ep[i]; + ep->req_pending = 0; + } +} + +/* Send a ZLP on EP0 */ +static void udc_ep0_send_zlp(struct lpc32xx_udc *udc) +{ + udc_write_hwep(udc, EP_IN, NULL, 0); +} + +/* Get current frame number */ +static u16 udc_get_current_frame(struct lpc32xx_udc *udc) +{ + u16 flo, fhi; + + udc_protocol_cmd_w(udc, CMD_RD_FRAME); + flo = (u16) udc_protocol_cmd_r(udc, DAT_RD_FRAME); + fhi = (u16) udc_protocol_cmd_r(udc, DAT_RD_FRAME); + + return (fhi << 8) | flo; +} + +/* Set the device as configured - enables all endpoints */ +static inline void udc_set_device_configured(struct lpc32xx_udc *udc) +{ + udc_protocol_cmd_data_w(udc, CMD_CFG_DEV, DAT_WR_BYTE(CONF_DVICE)); +} + +/* Set the device as unconfigured - disables all endpoints */ +static inline void udc_set_device_unconfigured(struct lpc32xx_udc *udc) +{ + udc_protocol_cmd_data_w(udc, CMD_CFG_DEV, DAT_WR_BYTE(0)); +} + +/* reinit == restore initial software state */ +static void udc_reinit(struct lpc32xx_udc *udc) +{ + u32 i; + + INIT_LIST_HEAD(&udc->gadget.ep_list); + INIT_LIST_HEAD(&udc->gadget.ep0->ep_list); + + for (i = 0; i < NUM_ENDPOINTS; i++) { + struct lpc32xx_ep *ep = &udc->ep[i]; + + if (i != 0) + list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); + usb_ep_set_maxpacket_limit(&ep->ep, ep->maxpacket); + INIT_LIST_HEAD(&ep->queue); + ep->req_pending = 0; + } + + udc->ep0state = WAIT_FOR_SETUP; +} + +/* Must be called with lock */ +static void done(struct lpc32xx_ep *ep, struct lpc32xx_request *req, int status) +{ + struct lpc32xx_udc *udc = ep->udc; + + list_del_init(&req->queue); + if (req->req.status == -EINPROGRESS) + req->req.status = status; + else + status = req->req.status; + + if (ep->lep) { + usb_gadget_unmap_request(&udc->gadget, &req->req, ep->is_in); + + /* Free DDs */ + udc_dd_free(udc, req->dd_desc_ptr); + } + + if (status && status != -ESHUTDOWN) + ep_dbg(ep, "%s done %p, status %d\n", ep->ep.name, req, status); + + ep->req_pending = 0; + spin_unlock(&udc->lock); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&udc->lock); +} + +/* Must be called with lock */ +static void nuke(struct lpc32xx_ep *ep, int status) +{ + struct lpc32xx_request *req; + + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct lpc32xx_request, queue); + done(ep, req, status); + } + + if (status == -ESHUTDOWN) { + uda_disable_hwepint(ep->udc, ep->hwep_num); + udc_disable_hwep(ep->udc, ep->hwep_num); + } +} + +/* IN endpoint 0 transfer */ +static int udc_ep0_in_req(struct lpc32xx_udc *udc) +{ + struct lpc32xx_request *req; + struct lpc32xx_ep *ep0 = &udc->ep[0]; + u32 tsend, ts = 0; + + if (list_empty(&ep0->queue)) + /* Nothing to send */ + return 0; + else + req = list_entry(ep0->queue.next, struct lpc32xx_request, + queue); + + tsend = ts = req->req.length - req->req.actual; + if (ts == 0) { + /* Send a ZLP */ + udc_ep0_send_zlp(udc); + done(ep0, req, 0); + return 1; + } else if (ts > ep0->ep.maxpacket) + ts = ep0->ep.maxpacket; /* Just send what we can */ + + /* Write data to the EP0 FIFO and start transfer */ + udc_write_hwep(udc, EP_IN, (req->req.buf + req->req.actual), ts); + + /* Increment data pointer */ + req->req.actual += ts; + + if (tsend >= ep0->ep.maxpacket) + return 0; /* Stay in data transfer state */ + + /* Transfer request is complete */ + udc->ep0state = WAIT_FOR_SETUP; + done(ep0, req, 0); + return 1; +} + +/* OUT endpoint 0 transfer */ +static int udc_ep0_out_req(struct lpc32xx_udc *udc) +{ + struct lpc32xx_request *req; + struct lpc32xx_ep *ep0 = &udc->ep[0]; + u32 tr, bufferspace; + + if (list_empty(&ep0->queue)) + return 0; + else + req = list_entry(ep0->queue.next, struct lpc32xx_request, + queue); + + if (req) { + if (req->req.length == 0) { + /* Just dequeue request */ + done(ep0, req, 0); + udc->ep0state = WAIT_FOR_SETUP; + return 1; + } + + /* Get data from FIFO */ + bufferspace = req->req.length - req->req.actual; + if (bufferspace > ep0->ep.maxpacket) + bufferspace = ep0->ep.maxpacket; + + /* Copy data to buffer */ + prefetchw(req->req.buf + req->req.actual); + tr = udc_read_hwep(udc, EP_OUT, req->req.buf + req->req.actual, + bufferspace); + req->req.actual += bufferspace; + + if (tr < ep0->ep.maxpacket) { + /* This is the last packet */ + done(ep0, req, 0); + udc->ep0state = WAIT_FOR_SETUP; + return 1; + } + } + + return 0; +} + +/* Must be called with lock */ +static void stop_activity(struct lpc32xx_udc *udc) +{ + struct usb_gadget_driver *driver = udc->driver; + int i; + + if (udc->gadget.speed == USB_SPEED_UNKNOWN) + driver = NULL; + + udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->suspended = 0; + + for (i = 0; i < NUM_ENDPOINTS; i++) { + struct lpc32xx_ep *ep = &udc->ep[i]; + nuke(ep, -ESHUTDOWN); + } + if (driver) { + spin_unlock(&udc->lock); + driver->disconnect(&udc->gadget); + spin_lock(&udc->lock); + } + + isp1301_pullup_enable(udc, 0, 0); + udc_disable(udc); + udc_reinit(udc); +} + +/* + * Activate or kill host pullup + * Can be called with or without lock + */ +static void pullup(struct lpc32xx_udc *udc, int is_on) +{ + if (!udc->clocked) + return; + + if (!udc->enabled || !udc->vbus) + is_on = 0; + + if (is_on != udc->pullup) + isp1301_pullup_enable(udc, is_on, 0); +} + +/* Must be called without lock */ +static int lpc32xx_ep_disable(struct usb_ep *_ep) +{ + struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep); + struct lpc32xx_udc *udc = ep->udc; + unsigned long flags; + + if ((ep->hwep_num_base == 0) || (ep->hwep_num == 0)) + return -EINVAL; + spin_lock_irqsave(&udc->lock, flags); + + nuke(ep, -ESHUTDOWN); + + /* Clear all DMA statuses for this EP */ + udc_ep_dma_disable(udc, ep->hwep_num); + writel(1 << ep->hwep_num, USBD_EOTINTCLR(udc->udp_baseaddr)); + writel(1 << ep->hwep_num, USBD_NDDRTINTCLR(udc->udp_baseaddr)); + writel(1 << ep->hwep_num, USBD_SYSERRTINTCLR(udc->udp_baseaddr)); + writel(1 << ep->hwep_num, USBD_DMARCLR(udc->udp_baseaddr)); + + /* Remove the DD pointer in the UDCA */ + udc->udca_v_base[ep->hwep_num] = 0; + + /* Disable and reset endpoint and interrupt */ + uda_clear_hwepint(udc, ep->hwep_num); + udc_unrealize_hwep(udc, ep->hwep_num); + + ep->hwep_num = 0; + + spin_unlock_irqrestore(&udc->lock, flags); + + atomic_dec(&udc->enabled_ep_cnt); + wake_up(&udc->ep_disable_wait_queue); + + return 0; +} + +/* Must be called without lock */ +static int lpc32xx_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep); + struct lpc32xx_udc *udc; + u16 maxpacket; + u32 tmp; + unsigned long flags; + + /* Verify EP data */ + if ((!_ep) || (!ep) || (!desc) || + (desc->bDescriptorType != USB_DT_ENDPOINT)) + return -EINVAL; + + udc = ep->udc; + maxpacket = usb_endpoint_maxp(desc); + if ((maxpacket == 0) || (maxpacket > ep->maxpacket)) { + dev_dbg(udc->dev, "bad ep descriptor's packet size\n"); + return -EINVAL; + } + + /* Don't touch EP0 */ + if (ep->hwep_num_base == 0) { + dev_dbg(udc->dev, "Can't re-enable EP0!!!\n"); + return -EINVAL; + } + + /* Is driver ready? */ + if ((!udc->driver) || (udc->gadget.speed == USB_SPEED_UNKNOWN)) { + dev_dbg(udc->dev, "bogus device state\n"); + return -ESHUTDOWN; + } + + tmp = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + switch (tmp) { + case USB_ENDPOINT_XFER_CONTROL: + return -EINVAL; + + case USB_ENDPOINT_XFER_INT: + if (maxpacket > ep->maxpacket) { + dev_dbg(udc->dev, + "Bad INT endpoint maxpacket %d\n", maxpacket); + return -EINVAL; + } + break; + + case USB_ENDPOINT_XFER_BULK: + switch (maxpacket) { + case 8: + case 16: + case 32: + case 64: + break; + + default: + dev_dbg(udc->dev, + "Bad BULK endpoint maxpacket %d\n", maxpacket); + return -EINVAL; + } + break; + + case USB_ENDPOINT_XFER_ISOC: + break; + } + spin_lock_irqsave(&udc->lock, flags); + + /* Initialize endpoint to match the selected descriptor */ + ep->is_in = (desc->bEndpointAddress & USB_DIR_IN) != 0; + ep->ep.maxpacket = maxpacket; + + /* Map hardware endpoint from base and direction */ + if (ep->is_in) + /* IN endpoints are offset 1 from the OUT endpoint */ + ep->hwep_num = ep->hwep_num_base + EP_IN; + else + ep->hwep_num = ep->hwep_num_base; + + ep_dbg(ep, "EP enabled: %s, HW:%d, MP:%d IN:%d\n", ep->ep.name, + ep->hwep_num, maxpacket, (ep->is_in == 1)); + + /* Realize the endpoint, interrupt is enabled later when + * buffers are queued, IN EPs will NAK until buffers are ready */ + udc_realize_hwep(udc, ep->hwep_num, ep->ep.maxpacket); + udc_clr_buffer_hwep(udc, ep->hwep_num); + uda_disable_hwepint(udc, ep->hwep_num); + udc_clrstall_hwep(udc, ep->hwep_num); + + /* Clear all DMA statuses for this EP */ + udc_ep_dma_disable(udc, ep->hwep_num); + writel(1 << ep->hwep_num, USBD_EOTINTCLR(udc->udp_baseaddr)); + writel(1 << ep->hwep_num, USBD_NDDRTINTCLR(udc->udp_baseaddr)); + writel(1 << ep->hwep_num, USBD_SYSERRTINTCLR(udc->udp_baseaddr)); + writel(1 << ep->hwep_num, USBD_DMARCLR(udc->udp_baseaddr)); + + spin_unlock_irqrestore(&udc->lock, flags); + + atomic_inc(&udc->enabled_ep_cnt); + return 0; +} + +/* + * Allocate a USB request list + * Can be called with or without lock + */ +static struct usb_request *lpc32xx_ep_alloc_request(struct usb_ep *_ep, + gfp_t gfp_flags) +{ + struct lpc32xx_request *req; + + req = kzalloc(sizeof(struct lpc32xx_request), gfp_flags); + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->queue); + return &req->req; +} + +/* + * De-allocate a USB request list + * Can be called with or without lock + */ +static void lpc32xx_ep_free_request(struct usb_ep *_ep, + struct usb_request *_req) +{ + struct lpc32xx_request *req; + + req = container_of(_req, struct lpc32xx_request, req); + BUG_ON(!list_empty(&req->queue)); + kfree(req); +} + +/* Must be called without lock */ +static int lpc32xx_ep_queue(struct usb_ep *_ep, + struct usb_request *_req, gfp_t gfp_flags) +{ + struct lpc32xx_request *req; + struct lpc32xx_ep *ep; + struct lpc32xx_udc *udc; + unsigned long flags; + int status = 0; + + req = container_of(_req, struct lpc32xx_request, req); + ep = container_of(_ep, struct lpc32xx_ep, ep); + + if (!_ep || !_req || !_req->complete || !_req->buf || + !list_empty(&req->queue)) + return -EINVAL; + + udc = ep->udc; + + if (udc->gadget.speed == USB_SPEED_UNKNOWN) + return -EPIPE; + + if (ep->lep) { + struct lpc32xx_usbd_dd_gad *dd; + + status = usb_gadget_map_request(&udc->gadget, _req, ep->is_in); + if (status) + return status; + + /* For the request, build a list of DDs */ + dd = udc_dd_alloc(udc); + if (!dd) { + /* Error allocating DD */ + return -ENOMEM; + } + req->dd_desc_ptr = dd; + + /* Setup the DMA descriptor */ + dd->dd_next_phy = dd->dd_next_v = 0; + dd->dd_buffer_addr = req->req.dma; + dd->dd_status = 0; + + /* Special handling for ISO EPs */ + if (ep->eptype == EP_ISO_TYPE) { + dd->dd_setup = DD_SETUP_ISO_EP | + DD_SETUP_PACKETLEN(0) | + DD_SETUP_DMALENBYTES(1); + dd->dd_iso_ps_mem_addr = dd->this_dma + 24; + if (ep->is_in) + dd->iso_status[0] = req->req.length; + else + dd->iso_status[0] = 0; + } else + dd->dd_setup = DD_SETUP_PACKETLEN(ep->ep.maxpacket) | + DD_SETUP_DMALENBYTES(req->req.length); + } + + ep_dbg(ep, "%s queue req %p len %d buf %p (in=%d) z=%d\n", _ep->name, + _req, _req->length, _req->buf, ep->is_in, _req->zero); + + spin_lock_irqsave(&udc->lock, flags); + + _req->status = -EINPROGRESS; + _req->actual = 0; + req->send_zlp = _req->zero; + + /* Kickstart empty queues */ + if (list_empty(&ep->queue)) { + list_add_tail(&req->queue, &ep->queue); + + if (ep->hwep_num_base == 0) { + /* Handle expected data direction */ + if (ep->is_in) { + /* IN packet to host */ + udc->ep0state = DATA_IN; + status = udc_ep0_in_req(udc); + } else { + /* OUT packet from host */ + udc->ep0state = DATA_OUT; + status = udc_ep0_out_req(udc); + } + } else if (ep->is_in) { + /* IN packet to host and kick off transfer */ + if (!ep->req_pending) + udc_ep_in_req_dma(udc, ep); + } else + /* OUT packet from host and kick off list */ + if (!ep->req_pending) + udc_ep_out_req_dma(udc, ep); + } else + list_add_tail(&req->queue, &ep->queue); + + spin_unlock_irqrestore(&udc->lock, flags); + + return (status < 0) ? status : 0; +} + +/* Must be called without lock */ +static int lpc32xx_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct lpc32xx_ep *ep; + struct lpc32xx_request *req = NULL, *iter; + unsigned long flags; + + ep = container_of(_ep, struct lpc32xx_ep, ep); + if (!_ep || ep->hwep_num_base == 0) + return -EINVAL; + + spin_lock_irqsave(&ep->udc->lock, flags); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry(iter, &ep->queue, queue) { + if (&iter->req != _req) + continue; + req = iter; + break; + } + if (!req) { + spin_unlock_irqrestore(&ep->udc->lock, flags); + return -EINVAL; + } + + done(ep, req, -ECONNRESET); + + spin_unlock_irqrestore(&ep->udc->lock, flags); + + return 0; +} + +/* Must be called without lock */ +static int lpc32xx_ep_set_halt(struct usb_ep *_ep, int value) +{ + struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep); + struct lpc32xx_udc *udc; + unsigned long flags; + + if ((!ep) || (ep->hwep_num <= 1)) + return -EINVAL; + + /* Don't halt an IN EP */ + if (ep->is_in) + return -EAGAIN; + + udc = ep->udc; + spin_lock_irqsave(&udc->lock, flags); + + if (value == 1) { + /* stall */ + udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(ep->hwep_num), + DAT_WR_BYTE(EP_STAT_ST)); + } else { + /* End stall */ + ep->wedge = 0; + udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(ep->hwep_num), + DAT_WR_BYTE(0)); + } + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +/* set the halt feature and ignores clear requests */ +static int lpc32xx_ep_set_wedge(struct usb_ep *_ep) +{ + struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep); + + if (!_ep || !ep->udc) + return -EINVAL; + + ep->wedge = 1; + + return usb_ep_set_halt(_ep); +} + +static const struct usb_ep_ops lpc32xx_ep_ops = { + .enable = lpc32xx_ep_enable, + .disable = lpc32xx_ep_disable, + .alloc_request = lpc32xx_ep_alloc_request, + .free_request = lpc32xx_ep_free_request, + .queue = lpc32xx_ep_queue, + .dequeue = lpc32xx_ep_dequeue, + .set_halt = lpc32xx_ep_set_halt, + .set_wedge = lpc32xx_ep_set_wedge, +}; + +/* Send a ZLP on a non-0 IN EP */ +static void udc_send_in_zlp(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep) +{ + /* Clear EP status */ + udc_clearep_getsts(udc, ep->hwep_num); + + /* Send ZLP via FIFO mechanism */ + udc_write_hwep(udc, ep->hwep_num, NULL, 0); +} + +/* + * Handle EP completion for ZLP + * This function will only be called when a delayed ZLP needs to be sent out + * after a DMA transfer has filled both buffers. + */ +static void udc_handle_eps(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep) +{ + u32 epstatus; + struct lpc32xx_request *req; + + if (ep->hwep_num <= 0) + return; + + uda_clear_hwepint(udc, ep->hwep_num); + + /* If this interrupt isn't enabled, return now */ + if (!(udc->enabled_hwepints & (1 << ep->hwep_num))) + return; + + /* Get endpoint status */ + epstatus = udc_clearep_getsts(udc, ep->hwep_num); + + /* + * This should never happen, but protect against writing to the + * buffer when full. + */ + if (epstatus & EP_SEL_F) + return; + + if (ep->is_in) { + udc_send_in_zlp(udc, ep); + uda_disable_hwepint(udc, ep->hwep_num); + } else + return; + + /* If there isn't a request waiting, something went wrong */ + req = list_entry(ep->queue.next, struct lpc32xx_request, queue); + if (req) { + done(ep, req, 0); + + /* Start another request if ready */ + if (!list_empty(&ep->queue)) { + if (ep->is_in) + udc_ep_in_req_dma(udc, ep); + else + udc_ep_out_req_dma(udc, ep); + } else + ep->req_pending = 0; + } +} + + +/* DMA end of transfer completion */ +static void udc_handle_dma_ep(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep) +{ + u32 status; + struct lpc32xx_request *req; + struct lpc32xx_usbd_dd_gad *dd; + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + ep->totalints++; +#endif + + req = list_entry(ep->queue.next, struct lpc32xx_request, queue); + if (!req) { + ep_err(ep, "DMA interrupt on no req!\n"); + return; + } + dd = req->dd_desc_ptr; + + /* DMA descriptor should always be retired for this call */ + if (!(dd->dd_status & DD_STATUS_DD_RETIRED)) + ep_warn(ep, "DMA descriptor did not retire\n"); + + /* Disable DMA */ + udc_ep_dma_disable(udc, ep->hwep_num); + writel((1 << ep->hwep_num), USBD_EOTINTCLR(udc->udp_baseaddr)); + writel((1 << ep->hwep_num), USBD_NDDRTINTCLR(udc->udp_baseaddr)); + + /* System error? */ + if (readl(USBD_SYSERRTINTST(udc->udp_baseaddr)) & + (1 << ep->hwep_num)) { + writel((1 << ep->hwep_num), + USBD_SYSERRTINTCLR(udc->udp_baseaddr)); + ep_err(ep, "AHB critical error!\n"); + ep->req_pending = 0; + + /* The error could have occurred on a packet of a multipacket + * transfer, so recovering the transfer is not possible. Close + * the request with an error */ + done(ep, req, -ECONNABORTED); + return; + } + + /* Handle the current DD's status */ + status = dd->dd_status; + switch (status & DD_STATUS_STS_MASK) { + case DD_STATUS_STS_NS: + /* DD not serviced? This shouldn't happen! */ + ep->req_pending = 0; + ep_err(ep, "DMA critical EP error: DD not serviced (0x%x)!\n", + status); + + done(ep, req, -ECONNABORTED); + return; + + case DD_STATUS_STS_BS: + /* Interrupt only fires on EOT - This shouldn't happen! */ + ep->req_pending = 0; + ep_err(ep, "DMA critical EP error: EOT prior to service completion (0x%x)!\n", + status); + done(ep, req, -ECONNABORTED); + return; + + case DD_STATUS_STS_NC: + case DD_STATUS_STS_DUR: + /* Really just a short packet, not an underrun */ + /* This is a good status and what we expect */ + break; + + default: + /* Data overrun, system error, or unknown */ + ep->req_pending = 0; + ep_err(ep, "DMA critical EP error: System error (0x%x)!\n", + status); + done(ep, req, -ECONNABORTED); + return; + } + + /* ISO endpoints are handled differently */ + if (ep->eptype == EP_ISO_TYPE) { + if (ep->is_in) + req->req.actual = req->req.length; + else + req->req.actual = dd->iso_status[0] & 0xFFFF; + } else + req->req.actual += DD_STATUS_CURDMACNT(status); + + /* Send a ZLP if necessary. This will be done for non-int + * packets which have a size that is a divisor of MAXP */ + if (req->send_zlp) { + /* + * If at least 1 buffer is available, send the ZLP now. + * Otherwise, the ZLP send needs to be deferred until a + * buffer is available. + */ + if (udc_clearep_getsts(udc, ep->hwep_num) & EP_SEL_F) { + udc_clearep_getsts(udc, ep->hwep_num); + uda_enable_hwepint(udc, ep->hwep_num); + udc_clearep_getsts(udc, ep->hwep_num); + + /* Let the EP interrupt handle the ZLP */ + return; + } else + udc_send_in_zlp(udc, ep); + } + + /* Transfer request is complete */ + done(ep, req, 0); + + /* Start another request if ready */ + udc_clearep_getsts(udc, ep->hwep_num); + if (!list_empty((&ep->queue))) { + if (ep->is_in) + udc_ep_in_req_dma(udc, ep); + else + udc_ep_out_req_dma(udc, ep); + } else + ep->req_pending = 0; + +} + +/* + * + * Endpoint 0 functions + * + */ +static void udc_handle_dev(struct lpc32xx_udc *udc) +{ + u32 tmp; + + udc_protocol_cmd_w(udc, CMD_GET_DEV_STAT); + tmp = udc_protocol_cmd_r(udc, DAT_GET_DEV_STAT); + + if (tmp & DEV_RST) + uda_usb_reset(udc); + else if (tmp & DEV_CON_CH) + uda_power_event(udc, (tmp & DEV_CON)); + else if (tmp & DEV_SUS_CH) { + if (tmp & DEV_SUS) { + if (udc->vbus == 0) + stop_activity(udc); + else if ((udc->gadget.speed != USB_SPEED_UNKNOWN) && + udc->driver) { + /* Power down transceiver */ + udc->poweron = 0; + schedule_work(&udc->pullup_job); + uda_resm_susp_event(udc, 1); + } + } else if ((udc->gadget.speed != USB_SPEED_UNKNOWN) && + udc->driver && udc->vbus) { + uda_resm_susp_event(udc, 0); + /* Power up transceiver */ + udc->poweron = 1; + schedule_work(&udc->pullup_job); + } + } +} + +static int udc_get_status(struct lpc32xx_udc *udc, u16 reqtype, u16 wIndex) +{ + struct lpc32xx_ep *ep; + u32 ep0buff = 0, tmp; + + switch (reqtype & USB_RECIP_MASK) { + case USB_RECIP_INTERFACE: + break; /* Not supported */ + + case USB_RECIP_DEVICE: + ep0buff = udc->gadget.is_selfpowered; + if (udc->dev_status & (1 << USB_DEVICE_REMOTE_WAKEUP)) + ep0buff |= (1 << USB_DEVICE_REMOTE_WAKEUP); + break; + + case USB_RECIP_ENDPOINT: + tmp = wIndex & USB_ENDPOINT_NUMBER_MASK; + ep = &udc->ep[tmp]; + if ((tmp == 0) || (tmp >= NUM_ENDPOINTS)) + return -EOPNOTSUPP; + + if (wIndex & USB_DIR_IN) { + if (!ep->is_in) + return -EOPNOTSUPP; /* Something's wrong */ + } else if (ep->is_in) + return -EOPNOTSUPP; /* Not an IN endpoint */ + + /* Get status of the endpoint */ + udc_protocol_cmd_w(udc, CMD_SEL_EP(ep->hwep_num)); + tmp = udc_protocol_cmd_r(udc, DAT_SEL_EP(ep->hwep_num)); + + if (tmp & EP_SEL_ST) + ep0buff = (1 << USB_ENDPOINT_HALT); + else + ep0buff = 0; + break; + + default: + break; + } + + /* Return data */ + udc_write_hwep(udc, EP_IN, &ep0buff, 2); + + return 0; +} + +static void udc_handle_ep0_setup(struct lpc32xx_udc *udc) +{ + struct lpc32xx_ep *ep, *ep0 = &udc->ep[0]; + struct usb_ctrlrequest ctrlpkt; + int i, bytes; + u16 wIndex, wValue, reqtype, req, tmp; + + /* Nuke previous transfers */ + nuke(ep0, -EPROTO); + + /* Get setup packet */ + bytes = udc_read_hwep(udc, EP_OUT, (u32 *) &ctrlpkt, 8); + if (bytes != 8) { + ep_warn(ep0, "Incorrectly sized setup packet (s/b 8, is %d)!\n", + bytes); + return; + } + + /* Native endianness */ + wIndex = le16_to_cpu(ctrlpkt.wIndex); + wValue = le16_to_cpu(ctrlpkt.wValue); + reqtype = le16_to_cpu(ctrlpkt.bRequestType); + + /* Set direction of EP0 */ + if (likely(reqtype & USB_DIR_IN)) + ep0->is_in = 1; + else + ep0->is_in = 0; + + /* Handle SETUP packet */ + req = le16_to_cpu(ctrlpkt.bRequest); + switch (req) { + case USB_REQ_CLEAR_FEATURE: + case USB_REQ_SET_FEATURE: + switch (reqtype) { + case (USB_TYPE_STANDARD | USB_RECIP_DEVICE): + if (wValue != USB_DEVICE_REMOTE_WAKEUP) + goto stall; /* Nothing else handled */ + + /* Tell board about event */ + if (req == USB_REQ_CLEAR_FEATURE) + udc->dev_status &= + ~(1 << USB_DEVICE_REMOTE_WAKEUP); + else + udc->dev_status |= + (1 << USB_DEVICE_REMOTE_WAKEUP); + uda_remwkp_cgh(udc); + goto zlp_send; + + case (USB_TYPE_STANDARD | USB_RECIP_ENDPOINT): + tmp = wIndex & USB_ENDPOINT_NUMBER_MASK; + if ((wValue != USB_ENDPOINT_HALT) || + (tmp >= NUM_ENDPOINTS)) + break; + + /* Find hardware endpoint from logical endpoint */ + ep = &udc->ep[tmp]; + tmp = ep->hwep_num; + if (tmp == 0) + break; + + if (req == USB_REQ_SET_FEATURE) + udc_stall_hwep(udc, tmp); + else if (!ep->wedge) + udc_clrstall_hwep(udc, tmp); + + goto zlp_send; + + default: + break; + } + break; + + case USB_REQ_SET_ADDRESS: + if (reqtype == (USB_TYPE_STANDARD | USB_RECIP_DEVICE)) { + udc_set_address(udc, wValue); + goto zlp_send; + } + break; + + case USB_REQ_GET_STATUS: + udc_get_status(udc, reqtype, wIndex); + return; + + default: + break; /* Let GadgetFS handle the descriptor instead */ + } + + if (likely(udc->driver)) { + /* device-2-host (IN) or no data setup command, process + * immediately */ + spin_unlock(&udc->lock); + i = udc->driver->setup(&udc->gadget, &ctrlpkt); + + spin_lock(&udc->lock); + if (req == USB_REQ_SET_CONFIGURATION) { + /* Configuration is set after endpoints are realized */ + if (wValue) { + /* Set configuration */ + udc_set_device_configured(udc); + + udc_protocol_cmd_data_w(udc, CMD_SET_MODE, + DAT_WR_BYTE(AP_CLK | + INAK_BI | INAK_II)); + } else { + /* Clear configuration */ + udc_set_device_unconfigured(udc); + + /* Disable NAK interrupts */ + udc_protocol_cmd_data_w(udc, CMD_SET_MODE, + DAT_WR_BYTE(AP_CLK)); + } + } + + if (i < 0) { + /* setup processing failed, force stall */ + dev_dbg(udc->dev, + "req %02x.%02x protocol STALL; stat %d\n", + reqtype, req, i); + udc->ep0state = WAIT_FOR_SETUP; + goto stall; + } + } + + if (!ep0->is_in) + udc_ep0_send_zlp(udc); /* ZLP IN packet on data phase */ + + return; + +stall: + udc_stall_hwep(udc, EP_IN); + return; + +zlp_send: + udc_ep0_send_zlp(udc); + return; +} + +/* IN endpoint 0 transfer */ +static void udc_handle_ep0_in(struct lpc32xx_udc *udc) +{ + struct lpc32xx_ep *ep0 = &udc->ep[0]; + u32 epstatus; + + /* Clear EP interrupt */ + epstatus = udc_clearep_getsts(udc, EP_IN); + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + ep0->totalints++; +#endif + + /* Stalled? Clear stall and reset buffers */ + if (epstatus & EP_SEL_ST) { + udc_clrstall_hwep(udc, EP_IN); + nuke(ep0, -ECONNABORTED); + udc->ep0state = WAIT_FOR_SETUP; + return; + } + + /* Is a buffer available? */ + if (!(epstatus & EP_SEL_F)) { + /* Handle based on current state */ + if (udc->ep0state == DATA_IN) + udc_ep0_in_req(udc); + else { + /* Unknown state for EP0 oe end of DATA IN phase */ + nuke(ep0, -ECONNABORTED); + udc->ep0state = WAIT_FOR_SETUP; + } + } +} + +/* OUT endpoint 0 transfer */ +static void udc_handle_ep0_out(struct lpc32xx_udc *udc) +{ + struct lpc32xx_ep *ep0 = &udc->ep[0]; + u32 epstatus; + + /* Clear EP interrupt */ + epstatus = udc_clearep_getsts(udc, EP_OUT); + + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + ep0->totalints++; +#endif + + /* Stalled? */ + if (epstatus & EP_SEL_ST) { + udc_clrstall_hwep(udc, EP_OUT); + nuke(ep0, -ECONNABORTED); + udc->ep0state = WAIT_FOR_SETUP; + return; + } + + /* A NAK may occur if a packet couldn't be received yet */ + if (epstatus & EP_SEL_EPN) + return; + /* Setup packet incoming? */ + if (epstatus & EP_SEL_STP) { + nuke(ep0, 0); + udc->ep0state = WAIT_FOR_SETUP; + } + + /* Data available? */ + if (epstatus & EP_SEL_F) + /* Handle based on current state */ + switch (udc->ep0state) { + case WAIT_FOR_SETUP: + udc_handle_ep0_setup(udc); + break; + + case DATA_OUT: + udc_ep0_out_req(udc); + break; + + default: + /* Unknown state for EP0 */ + nuke(ep0, -ECONNABORTED); + udc->ep0state = WAIT_FOR_SETUP; + } +} + +/* Must be called without lock */ +static int lpc32xx_get_frame(struct usb_gadget *gadget) +{ + int frame; + unsigned long flags; + struct lpc32xx_udc *udc = to_udc(gadget); + + if (!udc->clocked) + return -EINVAL; + + spin_lock_irqsave(&udc->lock, flags); + + frame = (int) udc_get_current_frame(udc); + + spin_unlock_irqrestore(&udc->lock, flags); + + return frame; +} + +static int lpc32xx_wakeup(struct usb_gadget *gadget) +{ + return -ENOTSUPP; +} + +static int lpc32xx_set_selfpowered(struct usb_gadget *gadget, int is_on) +{ + gadget->is_selfpowered = (is_on != 0); + + return 0; +} + +/* + * vbus is here! turn everything on that's ready + * Must be called without lock + */ +static int lpc32xx_vbus_session(struct usb_gadget *gadget, int is_active) +{ + unsigned long flags; + struct lpc32xx_udc *udc = to_udc(gadget); + + spin_lock_irqsave(&udc->lock, flags); + + /* Doesn't need lock */ + if (udc->driver) { + udc_clk_set(udc, 1); + udc_enable(udc); + pullup(udc, is_active); + } else { + stop_activity(udc); + pullup(udc, 0); + + spin_unlock_irqrestore(&udc->lock, flags); + /* + * Wait for all the endpoints to disable, + * before disabling clocks. Don't wait if + * endpoints are not enabled. + */ + if (atomic_read(&udc->enabled_ep_cnt)) + wait_event_interruptible(udc->ep_disable_wait_queue, + (atomic_read(&udc->enabled_ep_cnt) == 0)); + + spin_lock_irqsave(&udc->lock, flags); + + udc_clk_set(udc, 0); + } + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +/* Can be called with or without lock */ +static int lpc32xx_pullup(struct usb_gadget *gadget, int is_on) +{ + struct lpc32xx_udc *udc = to_udc(gadget); + + /* Doesn't need lock */ + pullup(udc, is_on); + + return 0; +} + +static int lpc32xx_start(struct usb_gadget *, struct usb_gadget_driver *); +static int lpc32xx_stop(struct usb_gadget *); + +static const struct usb_gadget_ops lpc32xx_udc_ops = { + .get_frame = lpc32xx_get_frame, + .wakeup = lpc32xx_wakeup, + .set_selfpowered = lpc32xx_set_selfpowered, + .vbus_session = lpc32xx_vbus_session, + .pullup = lpc32xx_pullup, + .udc_start = lpc32xx_start, + .udc_stop = lpc32xx_stop, +}; + +static void nop_release(struct device *dev) +{ + /* nothing to free */ +} + +static const struct lpc32xx_udc controller_template = { + .gadget = { + .ops = &lpc32xx_udc_ops, + .name = driver_name, + .dev = { + .init_name = "gadget", + .release = nop_release, + } + }, + .ep[0] = { + .ep = { + .name = "ep0", + .ops = &lpc32xx_ep_ops, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, + USB_EP_CAPS_DIR_ALL), + }, + .maxpacket = 64, + .hwep_num_base = 0, + .hwep_num = 0, /* Can be 0 or 1, has special handling */ + .lep = 0, + .eptype = EP_CTL_TYPE, + }, + .ep[1] = { + .ep = { + .name = "ep1-int", + .ops = &lpc32xx_ep_ops, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, + USB_EP_CAPS_DIR_ALL), + }, + .maxpacket = 64, + .hwep_num_base = 2, + .hwep_num = 0, /* 2 or 3, will be set later */ + .lep = 1, + .eptype = EP_INT_TYPE, + }, + .ep[2] = { + .ep = { + .name = "ep2-bulk", + .ops = &lpc32xx_ep_ops, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, + USB_EP_CAPS_DIR_ALL), + }, + .maxpacket = 64, + .hwep_num_base = 4, + .hwep_num = 0, /* 4 or 5, will be set later */ + .lep = 2, + .eptype = EP_BLK_TYPE, + }, + .ep[3] = { + .ep = { + .name = "ep3-iso", + .ops = &lpc32xx_ep_ops, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, + USB_EP_CAPS_DIR_ALL), + }, + .maxpacket = 1023, + .hwep_num_base = 6, + .hwep_num = 0, /* 6 or 7, will be set later */ + .lep = 3, + .eptype = EP_ISO_TYPE, + }, + .ep[4] = { + .ep = { + .name = "ep4-int", + .ops = &lpc32xx_ep_ops, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, + USB_EP_CAPS_DIR_ALL), + }, + .maxpacket = 64, + .hwep_num_base = 8, + .hwep_num = 0, /* 8 or 9, will be set later */ + .lep = 4, + .eptype = EP_INT_TYPE, + }, + .ep[5] = { + .ep = { + .name = "ep5-bulk", + .ops = &lpc32xx_ep_ops, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, + USB_EP_CAPS_DIR_ALL), + }, + .maxpacket = 64, + .hwep_num_base = 10, + .hwep_num = 0, /* 10 or 11, will be set later */ + .lep = 5, + .eptype = EP_BLK_TYPE, + }, + .ep[6] = { + .ep = { + .name = "ep6-iso", + .ops = &lpc32xx_ep_ops, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, + USB_EP_CAPS_DIR_ALL), + }, + .maxpacket = 1023, + .hwep_num_base = 12, + .hwep_num = 0, /* 12 or 13, will be set later */ + .lep = 6, + .eptype = EP_ISO_TYPE, + }, + .ep[7] = { + .ep = { + .name = "ep7-int", + .ops = &lpc32xx_ep_ops, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, + USB_EP_CAPS_DIR_ALL), + }, + .maxpacket = 64, + .hwep_num_base = 14, + .hwep_num = 0, + .lep = 7, + .eptype = EP_INT_TYPE, + }, + .ep[8] = { + .ep = { + .name = "ep8-bulk", + .ops = &lpc32xx_ep_ops, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, + USB_EP_CAPS_DIR_ALL), + }, + .maxpacket = 64, + .hwep_num_base = 16, + .hwep_num = 0, + .lep = 8, + .eptype = EP_BLK_TYPE, + }, + .ep[9] = { + .ep = { + .name = "ep9-iso", + .ops = &lpc32xx_ep_ops, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, + USB_EP_CAPS_DIR_ALL), + }, + .maxpacket = 1023, + .hwep_num_base = 18, + .hwep_num = 0, + .lep = 9, + .eptype = EP_ISO_TYPE, + }, + .ep[10] = { + .ep = { + .name = "ep10-int", + .ops = &lpc32xx_ep_ops, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, + USB_EP_CAPS_DIR_ALL), + }, + .maxpacket = 64, + .hwep_num_base = 20, + .hwep_num = 0, + .lep = 10, + .eptype = EP_INT_TYPE, + }, + .ep[11] = { + .ep = { + .name = "ep11-bulk", + .ops = &lpc32xx_ep_ops, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, + USB_EP_CAPS_DIR_ALL), + }, + .maxpacket = 64, + .hwep_num_base = 22, + .hwep_num = 0, + .lep = 11, + .eptype = EP_BLK_TYPE, + }, + .ep[12] = { + .ep = { + .name = "ep12-iso", + .ops = &lpc32xx_ep_ops, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, + USB_EP_CAPS_DIR_ALL), + }, + .maxpacket = 1023, + .hwep_num_base = 24, + .hwep_num = 0, + .lep = 12, + .eptype = EP_ISO_TYPE, + }, + .ep[13] = { + .ep = { + .name = "ep13-int", + .ops = &lpc32xx_ep_ops, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, + USB_EP_CAPS_DIR_ALL), + }, + .maxpacket = 64, + .hwep_num_base = 26, + .hwep_num = 0, + .lep = 13, + .eptype = EP_INT_TYPE, + }, + .ep[14] = { + .ep = { + .name = "ep14-bulk", + .ops = &lpc32xx_ep_ops, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, + USB_EP_CAPS_DIR_ALL), + }, + .maxpacket = 64, + .hwep_num_base = 28, + .hwep_num = 0, + .lep = 14, + .eptype = EP_BLK_TYPE, + }, + .ep[15] = { + .ep = { + .name = "ep15-bulk", + .ops = &lpc32xx_ep_ops, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, + USB_EP_CAPS_DIR_ALL), + }, + .maxpacket = 1023, + .hwep_num_base = 30, + .hwep_num = 0, + .lep = 15, + .eptype = EP_BLK_TYPE, + }, +}; + +/* ISO and status interrupts */ +static irqreturn_t lpc32xx_usb_lp_irq(int irq, void *_udc) +{ + u32 tmp, devstat; + struct lpc32xx_udc *udc = _udc; + + spin_lock(&udc->lock); + + /* Read the device status register */ + devstat = readl(USBD_DEVINTST(udc->udp_baseaddr)); + + devstat &= ~USBD_EP_FAST; + writel(devstat, USBD_DEVINTCLR(udc->udp_baseaddr)); + devstat = devstat & udc->enabled_devints; + + /* Device specific handling needed? */ + if (devstat & USBD_DEV_STAT) + udc_handle_dev(udc); + + /* Start of frame? (devstat & FRAME_INT): + * The frame interrupt isn't really needed for ISO support, + * as the driver will queue the necessary packets */ + + /* Error? */ + if (devstat & ERR_INT) { + /* All types of errors, from cable removal during transfer to + * misc protocol and bit errors. These are mostly for just info, + * as the USB hardware will work around these. If these errors + * happen alot, something is wrong. */ + udc_protocol_cmd_w(udc, CMD_RD_ERR_STAT); + tmp = udc_protocol_cmd_r(udc, DAT_RD_ERR_STAT); + dev_dbg(udc->dev, "Device error (0x%x)!\n", tmp); + } + + spin_unlock(&udc->lock); + + return IRQ_HANDLED; +} + +/* EP interrupts */ +static irqreturn_t lpc32xx_usb_hp_irq(int irq, void *_udc) +{ + u32 tmp; + struct lpc32xx_udc *udc = _udc; + + spin_lock(&udc->lock); + + /* Read the device status register */ + writel(USBD_EP_FAST, USBD_DEVINTCLR(udc->udp_baseaddr)); + + /* Endpoints */ + tmp = readl(USBD_EPINTST(udc->udp_baseaddr)); + + /* Special handling for EP0 */ + if (tmp & (EP_MASK_SEL(0, EP_OUT) | EP_MASK_SEL(0, EP_IN))) { + /* Handle EP0 IN */ + if (tmp & (EP_MASK_SEL(0, EP_IN))) + udc_handle_ep0_in(udc); + + /* Handle EP0 OUT */ + if (tmp & (EP_MASK_SEL(0, EP_OUT))) + udc_handle_ep0_out(udc); + } + + /* All other EPs */ + if (tmp & ~(EP_MASK_SEL(0, EP_OUT) | EP_MASK_SEL(0, EP_IN))) { + int i; + + /* Handle other EP interrupts */ + for (i = 1; i < NUM_ENDPOINTS; i++) { + if (tmp & (1 << udc->ep[i].hwep_num)) + udc_handle_eps(udc, &udc->ep[i]); + } + } + + spin_unlock(&udc->lock); + + return IRQ_HANDLED; +} + +static irqreturn_t lpc32xx_usb_devdma_irq(int irq, void *_udc) +{ + struct lpc32xx_udc *udc = _udc; + + int i; + u32 tmp; + + spin_lock(&udc->lock); + + /* Handle EP DMA EOT interrupts */ + tmp = readl(USBD_EOTINTST(udc->udp_baseaddr)) | + (readl(USBD_EPDMAST(udc->udp_baseaddr)) & + readl(USBD_NDDRTINTST(udc->udp_baseaddr))) | + readl(USBD_SYSERRTINTST(udc->udp_baseaddr)); + for (i = 1; i < NUM_ENDPOINTS; i++) { + if (tmp & (1 << udc->ep[i].hwep_num)) + udc_handle_dma_ep(udc, &udc->ep[i]); + } + + spin_unlock(&udc->lock); + + return IRQ_HANDLED; +} + +/* + * + * VBUS detection, pullup handler, and Gadget cable state notification + * + */ +static void vbus_work(struct lpc32xx_udc *udc) +{ + u8 value; + + if (udc->enabled != 0) { + /* Discharge VBUS real quick */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DISCHRG); + + /* Give VBUS some time (100mS) to discharge */ + msleep(100); + + /* Disable VBUS discharge resistor */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR, + OTG1_VBUS_DISCHRG); + + /* Clear interrupt */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_LATCH | + ISP1301_I2C_REG_CLEAR_ADDR, ~0); + + /* Get the VBUS status from the transceiver */ + value = i2c_smbus_read_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_SOURCE); + + /* VBUS on or off? */ + if (value & INT_SESS_VLD) + udc->vbus = 1; + else + udc->vbus = 0; + + /* VBUS changed? */ + if (udc->last_vbus != udc->vbus) { + udc->last_vbus = udc->vbus; + lpc32xx_vbus_session(&udc->gadget, udc->vbus); + } + } +} + +static irqreturn_t lpc32xx_usb_vbus_irq(int irq, void *_udc) +{ + struct lpc32xx_udc *udc = _udc; + + vbus_work(udc); + + return IRQ_HANDLED; +} + +static int lpc32xx_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct lpc32xx_udc *udc = to_udc(gadget); + + if (!driver || driver->max_speed < USB_SPEED_FULL || !driver->setup) { + dev_err(udc->dev, "bad parameter.\n"); + return -EINVAL; + } + + if (udc->driver) { + dev_err(udc->dev, "UDC already has a gadget driver\n"); + return -EBUSY; + } + + udc->driver = driver; + udc->gadget.dev.of_node = udc->dev->of_node; + udc->enabled = 1; + udc->gadget.is_selfpowered = 1; + udc->vbus = 0; + + /* Force VBUS process once to check for cable insertion */ + udc->last_vbus = udc->vbus = 0; + vbus_work(udc); + + /* enable interrupts */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_FALLING, INT_SESS_VLD | INT_VBUS_VLD); + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_RISING, INT_SESS_VLD | INT_VBUS_VLD); + + return 0; +} + +static int lpc32xx_stop(struct usb_gadget *gadget) +{ + struct lpc32xx_udc *udc = to_udc(gadget); + + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR, ~0); + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0); + + if (udc->clocked) { + spin_lock(&udc->lock); + stop_activity(udc); + spin_unlock(&udc->lock); + + /* + * Wait for all the endpoints to disable, + * before disabling clocks. Don't wait if + * endpoints are not enabled. + */ + if (atomic_read(&udc->enabled_ep_cnt)) + wait_event_interruptible(udc->ep_disable_wait_queue, + (atomic_read(&udc->enabled_ep_cnt) == 0)); + + spin_lock(&udc->lock); + udc_clk_set(udc, 0); + spin_unlock(&udc->lock); + } + + udc->enabled = 0; + udc->driver = NULL; + + return 0; +} + +static void lpc32xx_udc_shutdown(struct platform_device *dev) +{ + /* Force disconnect on reboot */ + struct lpc32xx_udc *udc = platform_get_drvdata(dev); + + pullup(udc, 0); +} + +/* + * Callbacks to be overridden by options passed via OF (TODO) + */ + +static void lpc32xx_usbd_conn_chg(int conn) +{ + /* Do nothing, it might be nice to enable an LED + * based on conn state being !0 */ +} + +static void lpc32xx_usbd_susp_chg(int susp) +{ + /* Device suspend if susp != 0 */ +} + +static void lpc32xx_rmwkup_chg(int remote_wakup_enable) +{ + /* Enable or disable USB remote wakeup */ +} + +static struct lpc32xx_usbd_cfg lpc32xx_usbddata = { + .vbus_drv_pol = 0, + .conn_chgb = &lpc32xx_usbd_conn_chg, + .susp_chgb = &lpc32xx_usbd_susp_chg, + .rmwk_chgb = &lpc32xx_rmwkup_chg, +}; + + +static u64 lpc32xx_usbd_dmamask = ~(u32) 0x7F; + +static int lpc32xx_udc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct lpc32xx_udc *udc; + int retval, i; + dma_addr_t dma_handle; + struct device_node *isp1301_node; + + udc = devm_kmemdup(dev, &controller_template, sizeof(*udc), GFP_KERNEL); + if (!udc) + return -ENOMEM; + + for (i = 0; i <= 15; i++) + udc->ep[i].udc = udc; + udc->gadget.ep0 = &udc->ep[0].ep; + + /* init software state */ + udc->gadget.dev.parent = dev; + udc->pdev = pdev; + udc->dev = &pdev->dev; + udc->enabled = 0; + + if (pdev->dev.of_node) { + isp1301_node = of_parse_phandle(pdev->dev.of_node, + "transceiver", 0); + } else { + isp1301_node = NULL; + } + + udc->isp1301_i2c_client = isp1301_get_client(isp1301_node); + of_node_put(isp1301_node); + if (!udc->isp1301_i2c_client) { + return -EPROBE_DEFER; + } + + dev_info(udc->dev, "ISP1301 I2C device at address 0x%x\n", + udc->isp1301_i2c_client->addr); + + pdev->dev.dma_mask = &lpc32xx_usbd_dmamask; + retval = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (retval) + return retval; + + udc->board = &lpc32xx_usbddata; + + /* + * Resources are mapped as follows: + * IORESOURCE_MEM, base address and size of USB space + * IORESOURCE_IRQ, USB device low priority interrupt number + * IORESOURCE_IRQ, USB device high priority interrupt number + * IORESOURCE_IRQ, USB device interrupt number + * IORESOURCE_IRQ, USB transceiver interrupt number + */ + + spin_lock_init(&udc->lock); + + /* Get IRQs */ + for (i = 0; i < 4; i++) { + udc->udp_irq[i] = platform_get_irq(pdev, i); + if (udc->udp_irq[i] < 0) + return udc->udp_irq[i]; + } + + udc->udp_baseaddr = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(udc->udp_baseaddr)) { + dev_err(udc->dev, "IO map failure\n"); + return PTR_ERR(udc->udp_baseaddr); + } + + /* Get USB device clock */ + udc->usb_slv_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(udc->usb_slv_clk)) { + dev_err(udc->dev, "failed to acquire USB device clock\n"); + return PTR_ERR(udc->usb_slv_clk); + } + + /* Enable USB device clock */ + retval = clk_prepare_enable(udc->usb_slv_clk); + if (retval < 0) { + dev_err(udc->dev, "failed to start USB device clock\n"); + return retval; + } + + /* Setup deferred workqueue data */ + udc->poweron = udc->pullup = 0; + INIT_WORK(&udc->pullup_job, pullup_work); +#ifdef CONFIG_PM + INIT_WORK(&udc->power_job, power_work); +#endif + + /* All clocks are now on */ + udc->clocked = 1; + + isp1301_udc_configure(udc); + /* Allocate memory for the UDCA */ + udc->udca_v_base = dma_alloc_coherent(&pdev->dev, UDCA_BUFF_SIZE, + &dma_handle, + (GFP_KERNEL | GFP_DMA)); + if (!udc->udca_v_base) { + dev_err(udc->dev, "error getting UDCA region\n"); + retval = -ENOMEM; + goto i2c_fail; + } + udc->udca_p_base = dma_handle; + dev_dbg(udc->dev, "DMA buffer(0x%x bytes), P:0x%08x, V:0x%p\n", + UDCA_BUFF_SIZE, udc->udca_p_base, udc->udca_v_base); + + /* Setup the DD DMA memory pool */ + udc->dd_cache = dma_pool_create("udc_dd", udc->dev, + sizeof(struct lpc32xx_usbd_dd_gad), + sizeof(u32), 0); + if (!udc->dd_cache) { + dev_err(udc->dev, "error getting DD DMA region\n"); + retval = -ENOMEM; + goto dma_alloc_fail; + } + + /* Clear USB peripheral and initialize gadget endpoints */ + udc_disable(udc); + udc_reinit(udc); + + /* Request IRQs - low and high priority USB device IRQs are routed to + * the same handler, while the DMA interrupt is routed elsewhere */ + retval = devm_request_irq(dev, udc->udp_irq[IRQ_USB_LP], + lpc32xx_usb_lp_irq, 0, "udc_lp", udc); + if (retval < 0) { + dev_err(udc->dev, "LP request irq %d failed\n", + udc->udp_irq[IRQ_USB_LP]); + goto irq_req_fail; + } + retval = devm_request_irq(dev, udc->udp_irq[IRQ_USB_HP], + lpc32xx_usb_hp_irq, 0, "udc_hp", udc); + if (retval < 0) { + dev_err(udc->dev, "HP request irq %d failed\n", + udc->udp_irq[IRQ_USB_HP]); + goto irq_req_fail; + } + + retval = devm_request_irq(dev, udc->udp_irq[IRQ_USB_DEVDMA], + lpc32xx_usb_devdma_irq, 0, "udc_dma", udc); + if (retval < 0) { + dev_err(udc->dev, "DEV request irq %d failed\n", + udc->udp_irq[IRQ_USB_DEVDMA]); + goto irq_req_fail; + } + + /* The transceiver interrupt is used for VBUS detection and will + kick off the VBUS handler function */ + retval = devm_request_threaded_irq(dev, udc->udp_irq[IRQ_USB_ATX], NULL, + lpc32xx_usb_vbus_irq, IRQF_ONESHOT, + "udc_otg", udc); + if (retval < 0) { + dev_err(udc->dev, "VBUS request irq %d failed\n", + udc->udp_irq[IRQ_USB_ATX]); + goto irq_req_fail; + } + + /* Initialize wait queue */ + init_waitqueue_head(&udc->ep_disable_wait_queue); + atomic_set(&udc->enabled_ep_cnt, 0); + + retval = usb_add_gadget_udc(dev, &udc->gadget); + if (retval < 0) + goto add_gadget_fail; + + dev_set_drvdata(dev, udc); + device_init_wakeup(dev, 1); + create_debug_file(udc); + + /* Disable clocks for now */ + udc_clk_set(udc, 0); + + dev_info(udc->dev, "%s version %s\n", driver_name, DRIVER_VERSION); + return 0; + +add_gadget_fail: +irq_req_fail: + dma_pool_destroy(udc->dd_cache); +dma_alloc_fail: + dma_free_coherent(&pdev->dev, UDCA_BUFF_SIZE, + udc->udca_v_base, udc->udca_p_base); +i2c_fail: + clk_disable_unprepare(udc->usb_slv_clk); + dev_err(udc->dev, "%s probe failed, %d\n", driver_name, retval); + + return retval; +} + +static int lpc32xx_udc_remove(struct platform_device *pdev) +{ + struct lpc32xx_udc *udc = platform_get_drvdata(pdev); + + usb_del_gadget_udc(&udc->gadget); + if (udc->driver) + return -EBUSY; + + udc_clk_set(udc, 1); + udc_disable(udc); + pullup(udc, 0); + + device_init_wakeup(&pdev->dev, 0); + remove_debug_file(udc); + + dma_pool_destroy(udc->dd_cache); + dma_free_coherent(&pdev->dev, UDCA_BUFF_SIZE, + udc->udca_v_base, udc->udca_p_base); + + clk_disable_unprepare(udc->usb_slv_clk); + + return 0; +} + +#ifdef CONFIG_PM +static int lpc32xx_udc_suspend(struct platform_device *pdev, pm_message_t mesg) +{ + struct lpc32xx_udc *udc = platform_get_drvdata(pdev); + + if (udc->clocked) { + /* Power down ISP */ + udc->poweron = 0; + isp1301_set_powerstate(udc, 0); + + /* Disable clocking */ + udc_clk_set(udc, 0); + + /* Keep clock flag on, so we know to re-enable clocks + on resume */ + udc->clocked = 1; + + /* Kill global USB clock */ + clk_disable_unprepare(udc->usb_slv_clk); + } + + return 0; +} + +static int lpc32xx_udc_resume(struct platform_device *pdev) +{ + struct lpc32xx_udc *udc = platform_get_drvdata(pdev); + + if (udc->clocked) { + /* Enable global USB clock */ + clk_prepare_enable(udc->usb_slv_clk); + + /* Enable clocking */ + udc_clk_set(udc, 1); + + /* ISP back to normal power mode */ + udc->poweron = 1; + isp1301_set_powerstate(udc, 1); + } + + return 0; +} +#else +#define lpc32xx_udc_suspend NULL +#define lpc32xx_udc_resume NULL +#endif + +#ifdef CONFIG_OF +static const struct of_device_id lpc32xx_udc_of_match[] = { + { .compatible = "nxp,lpc3220-udc", }, + { }, +}; +MODULE_DEVICE_TABLE(of, lpc32xx_udc_of_match); +#endif + +static struct platform_driver lpc32xx_udc_driver = { + .remove = lpc32xx_udc_remove, + .shutdown = lpc32xx_udc_shutdown, + .suspend = lpc32xx_udc_suspend, + .resume = lpc32xx_udc_resume, + .driver = { + .name = driver_name, + .of_match_table = of_match_ptr(lpc32xx_udc_of_match), + }, +}; + +module_platform_driver_probe(lpc32xx_udc_driver, lpc32xx_udc_probe); + +MODULE_DESCRIPTION("LPC32XX udc driver"); +MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>"); +MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:lpc32xx_udc"); diff --git a/drivers/usb/gadget/udc/m66592-udc.c b/drivers/usb/gadget/udc/m66592-udc.c new file mode 100644 index 000000000..d88871e71 --- /dev/null +++ b/drivers/usb/gadget/udc/m66592-udc.c @@ -0,0 +1,1697 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * M66592 UDC (USB gadget) + * + * Copyright (C) 2006-2007 Renesas Solutions Corp. + * + * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> + */ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + +#include "m66592-udc.h" + +MODULE_DESCRIPTION("M66592 USB gadget driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Yoshihiro Shimoda"); +MODULE_ALIAS("platform:m66592_udc"); + +#define DRIVER_VERSION "21 July 2009" + +static const char udc_name[] = "m66592_udc"; +static const char *m66592_ep_name[] = { + "ep0", "ep1", "ep2", "ep3", "ep4", "ep5", "ep6", "ep7" +}; + +static void disable_controller(struct m66592 *m66592); +static void irq_ep0_write(struct m66592_ep *ep, struct m66592_request *req); +static void irq_packet_write(struct m66592_ep *ep, struct m66592_request *req); +static int m66592_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t gfp_flags); + +static void transfer_complete(struct m66592_ep *ep, + struct m66592_request *req, int status); + +/*-------------------------------------------------------------------------*/ +static inline u16 get_usb_speed(struct m66592 *m66592) +{ + return (m66592_read(m66592, M66592_DVSTCTR) & M66592_RHST); +} + +static void enable_pipe_irq(struct m66592 *m66592, u16 pipenum, + unsigned long reg) +{ + u16 tmp; + + tmp = m66592_read(m66592, M66592_INTENB0); + m66592_bclr(m66592, M66592_BEMPE | M66592_NRDYE | M66592_BRDYE, + M66592_INTENB0); + m66592_bset(m66592, (1 << pipenum), reg); + m66592_write(m66592, tmp, M66592_INTENB0); +} + +static void disable_pipe_irq(struct m66592 *m66592, u16 pipenum, + unsigned long reg) +{ + u16 tmp; + + tmp = m66592_read(m66592, M66592_INTENB0); + m66592_bclr(m66592, M66592_BEMPE | M66592_NRDYE | M66592_BRDYE, + M66592_INTENB0); + m66592_bclr(m66592, (1 << pipenum), reg); + m66592_write(m66592, tmp, M66592_INTENB0); +} + +static void m66592_usb_connect(struct m66592 *m66592) +{ + m66592_bset(m66592, M66592_CTRE, M66592_INTENB0); + m66592_bset(m66592, M66592_WDST | M66592_RDST | M66592_CMPL, + M66592_INTENB0); + m66592_bset(m66592, M66592_BEMPE | M66592_BRDYE, M66592_INTENB0); + + m66592_bset(m66592, M66592_DPRPU, M66592_SYSCFG); +} + +static void m66592_usb_disconnect(struct m66592 *m66592) +__releases(m66592->lock) +__acquires(m66592->lock) +{ + m66592_bclr(m66592, M66592_CTRE, M66592_INTENB0); + m66592_bclr(m66592, M66592_WDST | M66592_RDST | M66592_CMPL, + M66592_INTENB0); + m66592_bclr(m66592, M66592_BEMPE | M66592_BRDYE, M66592_INTENB0); + m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG); + + m66592->gadget.speed = USB_SPEED_UNKNOWN; + spin_unlock(&m66592->lock); + m66592->driver->disconnect(&m66592->gadget); + spin_lock(&m66592->lock); + + disable_controller(m66592); + INIT_LIST_HEAD(&m66592->ep[0].queue); +} + +static inline u16 control_reg_get_pid(struct m66592 *m66592, u16 pipenum) +{ + u16 pid = 0; + unsigned long offset; + + if (pipenum == 0) + pid = m66592_read(m66592, M66592_DCPCTR) & M66592_PID; + else if (pipenum < M66592_MAX_NUM_PIPE) { + offset = get_pipectr_addr(pipenum); + pid = m66592_read(m66592, offset) & M66592_PID; + } else + pr_err("unexpect pipe num (%d)\n", pipenum); + + return pid; +} + +static inline void control_reg_set_pid(struct m66592 *m66592, u16 pipenum, + u16 pid) +{ + unsigned long offset; + + if (pipenum == 0) + m66592_mdfy(m66592, pid, M66592_PID, M66592_DCPCTR); + else if (pipenum < M66592_MAX_NUM_PIPE) { + offset = get_pipectr_addr(pipenum); + m66592_mdfy(m66592, pid, M66592_PID, offset); + } else + pr_err("unexpect pipe num (%d)\n", pipenum); +} + +static inline void pipe_start(struct m66592 *m66592, u16 pipenum) +{ + control_reg_set_pid(m66592, pipenum, M66592_PID_BUF); +} + +static inline void pipe_stop(struct m66592 *m66592, u16 pipenum) +{ + control_reg_set_pid(m66592, pipenum, M66592_PID_NAK); +} + +static inline void pipe_stall(struct m66592 *m66592, u16 pipenum) +{ + control_reg_set_pid(m66592, pipenum, M66592_PID_STALL); +} + +static inline u16 control_reg_get(struct m66592 *m66592, u16 pipenum) +{ + u16 ret = 0; + unsigned long offset; + + if (pipenum == 0) + ret = m66592_read(m66592, M66592_DCPCTR); + else if (pipenum < M66592_MAX_NUM_PIPE) { + offset = get_pipectr_addr(pipenum); + ret = m66592_read(m66592, offset); + } else + pr_err("unexpect pipe num (%d)\n", pipenum); + + return ret; +} + +static inline void control_reg_sqclr(struct m66592 *m66592, u16 pipenum) +{ + unsigned long offset; + + pipe_stop(m66592, pipenum); + + if (pipenum == 0) + m66592_bset(m66592, M66592_SQCLR, M66592_DCPCTR); + else if (pipenum < M66592_MAX_NUM_PIPE) { + offset = get_pipectr_addr(pipenum); + m66592_bset(m66592, M66592_SQCLR, offset); + } else + pr_err("unexpect pipe num(%d)\n", pipenum); +} + +static inline int get_buffer_size(struct m66592 *m66592, u16 pipenum) +{ + u16 tmp; + int size; + + if (pipenum == 0) { + tmp = m66592_read(m66592, M66592_DCPCFG); + if ((tmp & M66592_CNTMD) != 0) + size = 256; + else { + tmp = m66592_read(m66592, M66592_DCPMAXP); + size = tmp & M66592_MAXP; + } + } else { + m66592_write(m66592, pipenum, M66592_PIPESEL); + tmp = m66592_read(m66592, M66592_PIPECFG); + if ((tmp & M66592_CNTMD) != 0) { + tmp = m66592_read(m66592, M66592_PIPEBUF); + size = ((tmp >> 10) + 1) * 64; + } else { + tmp = m66592_read(m66592, M66592_PIPEMAXP); + size = tmp & M66592_MXPS; + } + } + + return size; +} + +static inline void pipe_change(struct m66592 *m66592, u16 pipenum) +{ + struct m66592_ep *ep = m66592->pipenum2ep[pipenum]; + unsigned short mbw; + + if (ep->use_dma) + return; + + m66592_mdfy(m66592, pipenum, M66592_CURPIPE, ep->fifosel); + + ndelay(450); + + if (m66592->pdata->on_chip) + mbw = M66592_MBW_32; + else + mbw = M66592_MBW_16; + + m66592_bset(m66592, mbw, ep->fifosel); +} + +static int pipe_buffer_setting(struct m66592 *m66592, + struct m66592_pipe_info *info) +{ + u16 bufnum = 0, buf_bsize = 0; + u16 pipecfg = 0; + + if (info->pipe == 0) + return -EINVAL; + + m66592_write(m66592, info->pipe, M66592_PIPESEL); + + if (info->dir_in) + pipecfg |= M66592_DIR; + pipecfg |= info->type; + pipecfg |= info->epnum; + switch (info->type) { + case M66592_INT: + bufnum = 4 + (info->pipe - M66592_BASE_PIPENUM_INT); + buf_bsize = 0; + break; + case M66592_BULK: + /* isochronous pipes may be used as bulk pipes */ + if (info->pipe >= M66592_BASE_PIPENUM_BULK) + bufnum = info->pipe - M66592_BASE_PIPENUM_BULK; + else + bufnum = info->pipe - M66592_BASE_PIPENUM_ISOC; + + bufnum = M66592_BASE_BUFNUM + (bufnum * 16); + buf_bsize = 7; + pipecfg |= M66592_DBLB; + if (!info->dir_in) + pipecfg |= M66592_SHTNAK; + break; + case M66592_ISO: + bufnum = M66592_BASE_BUFNUM + + (info->pipe - M66592_BASE_PIPENUM_ISOC) * 16; + buf_bsize = 7; + break; + } + + if (buf_bsize && ((bufnum + 16) >= M66592_MAX_BUFNUM)) { + pr_err("m66592 pipe memory is insufficient\n"); + return -ENOMEM; + } + + m66592_write(m66592, pipecfg, M66592_PIPECFG); + m66592_write(m66592, (buf_bsize << 10) | (bufnum), M66592_PIPEBUF); + m66592_write(m66592, info->maxpacket, M66592_PIPEMAXP); + if (info->interval) + info->interval--; + m66592_write(m66592, info->interval, M66592_PIPEPERI); + + return 0; +} + +static void pipe_buffer_release(struct m66592 *m66592, + struct m66592_pipe_info *info) +{ + if (info->pipe == 0) + return; + + if (is_bulk_pipe(info->pipe)) { + m66592->bulk--; + } else if (is_interrupt_pipe(info->pipe)) + m66592->interrupt--; + else if (is_isoc_pipe(info->pipe)) { + m66592->isochronous--; + if (info->type == M66592_BULK) + m66592->bulk--; + } else + pr_err("ep_release: unexpect pipenum (%d)\n", + info->pipe); +} + +static void pipe_initialize(struct m66592_ep *ep) +{ + struct m66592 *m66592 = ep->m66592; + unsigned short mbw; + + m66592_mdfy(m66592, 0, M66592_CURPIPE, ep->fifosel); + + m66592_write(m66592, M66592_ACLRM, ep->pipectr); + m66592_write(m66592, 0, ep->pipectr); + m66592_write(m66592, M66592_SQCLR, ep->pipectr); + if (ep->use_dma) { + m66592_mdfy(m66592, ep->pipenum, M66592_CURPIPE, ep->fifosel); + + ndelay(450); + + if (m66592->pdata->on_chip) + mbw = M66592_MBW_32; + else + mbw = M66592_MBW_16; + + m66592_bset(m66592, mbw, ep->fifosel); + } +} + +static void m66592_ep_setting(struct m66592 *m66592, struct m66592_ep *ep, + const struct usb_endpoint_descriptor *desc, + u16 pipenum, int dma) +{ + if ((pipenum != 0) && dma) { + if (m66592->num_dma == 0) { + m66592->num_dma++; + ep->use_dma = 1; + ep->fifoaddr = M66592_D0FIFO; + ep->fifosel = M66592_D0FIFOSEL; + ep->fifoctr = M66592_D0FIFOCTR; + ep->fifotrn = M66592_D0FIFOTRN; + } else if (!m66592->pdata->on_chip && m66592->num_dma == 1) { + m66592->num_dma++; + ep->use_dma = 1; + ep->fifoaddr = M66592_D1FIFO; + ep->fifosel = M66592_D1FIFOSEL; + ep->fifoctr = M66592_D1FIFOCTR; + ep->fifotrn = M66592_D1FIFOTRN; + } else { + ep->use_dma = 0; + ep->fifoaddr = M66592_CFIFO; + ep->fifosel = M66592_CFIFOSEL; + ep->fifoctr = M66592_CFIFOCTR; + ep->fifotrn = 0; + } + } else { + ep->use_dma = 0; + ep->fifoaddr = M66592_CFIFO; + ep->fifosel = M66592_CFIFOSEL; + ep->fifoctr = M66592_CFIFOCTR; + ep->fifotrn = 0; + } + + ep->pipectr = get_pipectr_addr(pipenum); + ep->pipenum = pipenum; + ep->ep.maxpacket = usb_endpoint_maxp(desc); + m66592->pipenum2ep[pipenum] = ep; + m66592->epaddr2ep[desc->bEndpointAddress&USB_ENDPOINT_NUMBER_MASK] = ep; + INIT_LIST_HEAD(&ep->queue); +} + +static void m66592_ep_release(struct m66592_ep *ep) +{ + struct m66592 *m66592 = ep->m66592; + u16 pipenum = ep->pipenum; + + if (pipenum == 0) + return; + + if (ep->use_dma) + m66592->num_dma--; + ep->pipenum = 0; + ep->busy = 0; + ep->use_dma = 0; +} + +static int alloc_pipe_config(struct m66592_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + struct m66592 *m66592 = ep->m66592; + struct m66592_pipe_info info; + int dma = 0; + int *counter; + int ret; + + ep->ep.desc = desc; + + BUG_ON(ep->pipenum); + + switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { + case USB_ENDPOINT_XFER_BULK: + if (m66592->bulk >= M66592_MAX_NUM_BULK) { + if (m66592->isochronous >= M66592_MAX_NUM_ISOC) { + pr_err("bulk pipe is insufficient\n"); + return -ENODEV; + } else { + info.pipe = M66592_BASE_PIPENUM_ISOC + + m66592->isochronous; + counter = &m66592->isochronous; + } + } else { + info.pipe = M66592_BASE_PIPENUM_BULK + m66592->bulk; + counter = &m66592->bulk; + } + info.type = M66592_BULK; + dma = 1; + break; + case USB_ENDPOINT_XFER_INT: + if (m66592->interrupt >= M66592_MAX_NUM_INT) { + pr_err("interrupt pipe is insufficient\n"); + return -ENODEV; + } + info.pipe = M66592_BASE_PIPENUM_INT + m66592->interrupt; + info.type = M66592_INT; + counter = &m66592->interrupt; + break; + case USB_ENDPOINT_XFER_ISOC: + if (m66592->isochronous >= M66592_MAX_NUM_ISOC) { + pr_err("isochronous pipe is insufficient\n"); + return -ENODEV; + } + info.pipe = M66592_BASE_PIPENUM_ISOC + m66592->isochronous; + info.type = M66592_ISO; + counter = &m66592->isochronous; + break; + default: + pr_err("unexpect xfer type\n"); + return -EINVAL; + } + ep->type = info.type; + + info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; + info.maxpacket = usb_endpoint_maxp(desc); + info.interval = desc->bInterval; + if (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) + info.dir_in = 1; + else + info.dir_in = 0; + + ret = pipe_buffer_setting(m66592, &info); + if (ret < 0) { + pr_err("pipe_buffer_setting fail\n"); + return ret; + } + + (*counter)++; + if ((counter == &m66592->isochronous) && info.type == M66592_BULK) + m66592->bulk++; + + m66592_ep_setting(m66592, ep, desc, info.pipe, dma); + pipe_initialize(ep); + + return 0; +} + +static int free_pipe_config(struct m66592_ep *ep) +{ + struct m66592 *m66592 = ep->m66592; + struct m66592_pipe_info info; + + info.pipe = ep->pipenum; + info.type = ep->type; + pipe_buffer_release(m66592, &info); + m66592_ep_release(ep); + + return 0; +} + +/*-------------------------------------------------------------------------*/ +static void pipe_irq_enable(struct m66592 *m66592, u16 pipenum) +{ + enable_irq_ready(m66592, pipenum); + enable_irq_nrdy(m66592, pipenum); +} + +static void pipe_irq_disable(struct m66592 *m66592, u16 pipenum) +{ + disable_irq_ready(m66592, pipenum); + disable_irq_nrdy(m66592, pipenum); +} + +/* if complete is true, gadget driver complete function is not call */ +static void control_end(struct m66592 *m66592, unsigned ccpl) +{ + m66592->ep[0].internal_ccpl = ccpl; + pipe_start(m66592, 0); + m66592_bset(m66592, M66592_CCPL, M66592_DCPCTR); +} + +static void start_ep0_write(struct m66592_ep *ep, struct m66592_request *req) +{ + struct m66592 *m66592 = ep->m66592; + + pipe_change(m66592, ep->pipenum); + m66592_mdfy(m66592, M66592_ISEL | M66592_PIPE0, + (M66592_ISEL | M66592_CURPIPE), + M66592_CFIFOSEL); + m66592_write(m66592, M66592_BCLR, ep->fifoctr); + if (req->req.length == 0) { + m66592_bset(m66592, M66592_BVAL, ep->fifoctr); + pipe_start(m66592, 0); + transfer_complete(ep, req, 0); + } else { + m66592_write(m66592, ~M66592_BEMP0, M66592_BEMPSTS); + irq_ep0_write(ep, req); + } +} + +static void start_packet_write(struct m66592_ep *ep, struct m66592_request *req) +{ + struct m66592 *m66592 = ep->m66592; + u16 tmp; + + pipe_change(m66592, ep->pipenum); + disable_irq_empty(m66592, ep->pipenum); + pipe_start(m66592, ep->pipenum); + + tmp = m66592_read(m66592, ep->fifoctr); + if (unlikely((tmp & M66592_FRDY) == 0)) + pipe_irq_enable(m66592, ep->pipenum); + else + irq_packet_write(ep, req); +} + +static void start_packet_read(struct m66592_ep *ep, struct m66592_request *req) +{ + struct m66592 *m66592 = ep->m66592; + u16 pipenum = ep->pipenum; + + if (ep->pipenum == 0) { + m66592_mdfy(m66592, M66592_PIPE0, + (M66592_ISEL | M66592_CURPIPE), + M66592_CFIFOSEL); + m66592_write(m66592, M66592_BCLR, ep->fifoctr); + pipe_start(m66592, pipenum); + pipe_irq_enable(m66592, pipenum); + } else { + if (ep->use_dma) { + m66592_bset(m66592, M66592_TRCLR, ep->fifosel); + pipe_change(m66592, pipenum); + m66592_bset(m66592, M66592_TRENB, ep->fifosel); + m66592_write(m66592, + (req->req.length + ep->ep.maxpacket - 1) + / ep->ep.maxpacket, + ep->fifotrn); + } + pipe_start(m66592, pipenum); /* trigger once */ + pipe_irq_enable(m66592, pipenum); + } +} + +static void start_packet(struct m66592_ep *ep, struct m66592_request *req) +{ + if (ep->ep.desc->bEndpointAddress & USB_DIR_IN) + start_packet_write(ep, req); + else + start_packet_read(ep, req); +} + +static void start_ep0(struct m66592_ep *ep, struct m66592_request *req) +{ + u16 ctsq; + + ctsq = m66592_read(ep->m66592, M66592_INTSTS0) & M66592_CTSQ; + + switch (ctsq) { + case M66592_CS_RDDS: + start_ep0_write(ep, req); + break; + case M66592_CS_WRDS: + start_packet_read(ep, req); + break; + + case M66592_CS_WRND: + control_end(ep->m66592, 0); + break; + default: + pr_err("start_ep0: unexpect ctsq(%x)\n", ctsq); + break; + } +} + +static void init_controller(struct m66592 *m66592) +{ + unsigned int endian; + + if (m66592->pdata->on_chip) { + if (m66592->pdata->endian) + endian = 0; /* big endian */ + else + endian = M66592_LITTLE; /* little endian */ + + m66592_bset(m66592, M66592_HSE, M66592_SYSCFG); /* High spd */ + m66592_bclr(m66592, M66592_USBE, M66592_SYSCFG); + m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG); + m66592_bset(m66592, M66592_USBE, M66592_SYSCFG); + + /* This is a workaound for SH7722 2nd cut */ + m66592_bset(m66592, 0x8000, M66592_DVSTCTR); + m66592_bset(m66592, 0x1000, M66592_TESTMODE); + m66592_bclr(m66592, 0x8000, M66592_DVSTCTR); + + m66592_bset(m66592, M66592_INTL, M66592_INTENB1); + + m66592_write(m66592, 0, M66592_CFBCFG); + m66592_write(m66592, 0, M66592_D0FBCFG); + m66592_bset(m66592, endian, M66592_CFBCFG); + m66592_bset(m66592, endian, M66592_D0FBCFG); + } else { + unsigned int clock, vif, irq_sense; + + if (m66592->pdata->endian) + endian = M66592_BIGEND; /* big endian */ + else + endian = 0; /* little endian */ + + if (m66592->pdata->vif) + vif = M66592_LDRV; /* 3.3v */ + else + vif = 0; /* 1.5v */ + + switch (m66592->pdata->xtal) { + case M66592_PLATDATA_XTAL_12MHZ: + clock = M66592_XTAL12; + break; + case M66592_PLATDATA_XTAL_24MHZ: + clock = M66592_XTAL24; + break; + case M66592_PLATDATA_XTAL_48MHZ: + clock = M66592_XTAL48; + break; + default: + pr_warn("m66592-udc: xtal configuration error\n"); + clock = 0; + } + + switch (m66592->irq_trigger) { + case IRQF_TRIGGER_LOW: + irq_sense = M66592_INTL; + break; + case IRQF_TRIGGER_FALLING: + irq_sense = 0; + break; + default: + pr_warn("m66592-udc: irq trigger config error\n"); + irq_sense = 0; + } + + m66592_bset(m66592, + (vif & M66592_LDRV) | (endian & M66592_BIGEND), + M66592_PINCFG); + m66592_bset(m66592, M66592_HSE, M66592_SYSCFG); /* High spd */ + m66592_mdfy(m66592, clock & M66592_XTAL, M66592_XTAL, + M66592_SYSCFG); + m66592_bclr(m66592, M66592_USBE, M66592_SYSCFG); + m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG); + m66592_bset(m66592, M66592_USBE, M66592_SYSCFG); + + m66592_bset(m66592, M66592_XCKE, M66592_SYSCFG); + + msleep(3); + + m66592_bset(m66592, M66592_RCKE | M66592_PLLC, M66592_SYSCFG); + + msleep(1); + + m66592_bset(m66592, M66592_SCKE, M66592_SYSCFG); + + m66592_bset(m66592, irq_sense & M66592_INTL, M66592_INTENB1); + m66592_write(m66592, M66592_BURST | M66592_CPU_ADR_RD_WR, + M66592_DMA0CFG); + } +} + +static void disable_controller(struct m66592 *m66592) +{ + m66592_bclr(m66592, M66592_UTST, M66592_TESTMODE); + if (!m66592->pdata->on_chip) { + m66592_bclr(m66592, M66592_SCKE, M66592_SYSCFG); + udelay(1); + m66592_bclr(m66592, M66592_PLLC, M66592_SYSCFG); + udelay(1); + m66592_bclr(m66592, M66592_RCKE, M66592_SYSCFG); + udelay(1); + m66592_bclr(m66592, M66592_XCKE, M66592_SYSCFG); + } +} + +static void m66592_start_xclock(struct m66592 *m66592) +{ + u16 tmp; + + if (!m66592->pdata->on_chip) { + tmp = m66592_read(m66592, M66592_SYSCFG); + if (!(tmp & M66592_XCKE)) + m66592_bset(m66592, M66592_XCKE, M66592_SYSCFG); + } +} + +/*-------------------------------------------------------------------------*/ +static void transfer_complete(struct m66592_ep *ep, + struct m66592_request *req, int status) +__releases(m66592->lock) +__acquires(m66592->lock) +{ + int restart = 0; + + if (unlikely(ep->pipenum == 0)) { + if (ep->internal_ccpl) { + ep->internal_ccpl = 0; + return; + } + } + + list_del_init(&req->queue); + if (ep->m66592->gadget.speed == USB_SPEED_UNKNOWN) + req->req.status = -ESHUTDOWN; + else + req->req.status = status; + + if (!list_empty(&ep->queue)) + restart = 1; + + spin_unlock(&ep->m66592->lock); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&ep->m66592->lock); + + if (restart) { + req = list_entry(ep->queue.next, struct m66592_request, queue); + if (ep->ep.desc) + start_packet(ep, req); + } +} + +static void irq_ep0_write(struct m66592_ep *ep, struct m66592_request *req) +{ + int i; + u16 tmp; + unsigned bufsize; + size_t size; + void *buf; + u16 pipenum = ep->pipenum; + struct m66592 *m66592 = ep->m66592; + + pipe_change(m66592, pipenum); + m66592_bset(m66592, M66592_ISEL, ep->fifosel); + + i = 0; + do { + tmp = m66592_read(m66592, ep->fifoctr); + if (i++ > 100000) { + pr_err("pipe0 is busy. maybe cpu i/o bus " + "conflict. please power off this controller."); + return; + } + ndelay(1); + } while ((tmp & M66592_FRDY) == 0); + + /* prepare parameters */ + bufsize = get_buffer_size(m66592, pipenum); + buf = req->req.buf + req->req.actual; + size = min(bufsize, req->req.length - req->req.actual); + + /* write fifo */ + if (req->req.buf) { + if (size > 0) + m66592_write_fifo(m66592, ep, buf, size); + if ((size == 0) || ((size % ep->ep.maxpacket) != 0)) + m66592_bset(m66592, M66592_BVAL, ep->fifoctr); + } + + /* update parameters */ + req->req.actual += size; + + /* check transfer finish */ + if ((!req->req.zero && (req->req.actual == req->req.length)) + || (size % ep->ep.maxpacket) + || (size == 0)) { + disable_irq_ready(m66592, pipenum); + disable_irq_empty(m66592, pipenum); + } else { + disable_irq_ready(m66592, pipenum); + enable_irq_empty(m66592, pipenum); + } + pipe_start(m66592, pipenum); +} + +static void irq_packet_write(struct m66592_ep *ep, struct m66592_request *req) +{ + u16 tmp; + unsigned bufsize; + size_t size; + void *buf; + u16 pipenum = ep->pipenum; + struct m66592 *m66592 = ep->m66592; + + pipe_change(m66592, pipenum); + tmp = m66592_read(m66592, ep->fifoctr); + if (unlikely((tmp & M66592_FRDY) == 0)) { + pipe_stop(m66592, pipenum); + pipe_irq_disable(m66592, pipenum); + pr_err("write fifo not ready. pipnum=%d\n", pipenum); + return; + } + + /* prepare parameters */ + bufsize = get_buffer_size(m66592, pipenum); + buf = req->req.buf + req->req.actual; + size = min(bufsize, req->req.length - req->req.actual); + + /* write fifo */ + if (req->req.buf) { + m66592_write_fifo(m66592, ep, buf, size); + if ((size == 0) + || ((size % ep->ep.maxpacket) != 0) + || ((bufsize != ep->ep.maxpacket) + && (bufsize > size))) + m66592_bset(m66592, M66592_BVAL, ep->fifoctr); + } + + /* update parameters */ + req->req.actual += size; + /* check transfer finish */ + if ((!req->req.zero && (req->req.actual == req->req.length)) + || (size % ep->ep.maxpacket) + || (size == 0)) { + disable_irq_ready(m66592, pipenum); + enable_irq_empty(m66592, pipenum); + } else { + disable_irq_empty(m66592, pipenum); + pipe_irq_enable(m66592, pipenum); + } +} + +static void irq_packet_read(struct m66592_ep *ep, struct m66592_request *req) +{ + u16 tmp; + int rcv_len, bufsize, req_len; + int size; + void *buf; + u16 pipenum = ep->pipenum; + struct m66592 *m66592 = ep->m66592; + int finish = 0; + + pipe_change(m66592, pipenum); + tmp = m66592_read(m66592, ep->fifoctr); + if (unlikely((tmp & M66592_FRDY) == 0)) { + req->req.status = -EPIPE; + pipe_stop(m66592, pipenum); + pipe_irq_disable(m66592, pipenum); + pr_err("read fifo not ready"); + return; + } + + /* prepare parameters */ + rcv_len = tmp & M66592_DTLN; + bufsize = get_buffer_size(m66592, pipenum); + + buf = req->req.buf + req->req.actual; + req_len = req->req.length - req->req.actual; + if (rcv_len < bufsize) + size = min(rcv_len, req_len); + else + size = min(bufsize, req_len); + + /* update parameters */ + req->req.actual += size; + + /* check transfer finish */ + if ((!req->req.zero && (req->req.actual == req->req.length)) + || (size % ep->ep.maxpacket) + || (size == 0)) { + pipe_stop(m66592, pipenum); + pipe_irq_disable(m66592, pipenum); + finish = 1; + } + + /* read fifo */ + if (req->req.buf) { + if (size == 0) + m66592_write(m66592, M66592_BCLR, ep->fifoctr); + else + m66592_read_fifo(m66592, ep->fifoaddr, buf, size); + } + + if ((ep->pipenum != 0) && finish) + transfer_complete(ep, req, 0); +} + +static void irq_pipe_ready(struct m66592 *m66592, u16 status, u16 enb) +{ + u16 check; + u16 pipenum; + struct m66592_ep *ep; + struct m66592_request *req; + + if ((status & M66592_BRDY0) && (enb & M66592_BRDY0)) { + m66592_write(m66592, ~M66592_BRDY0, M66592_BRDYSTS); + m66592_mdfy(m66592, M66592_PIPE0, M66592_CURPIPE, + M66592_CFIFOSEL); + + ep = &m66592->ep[0]; + req = list_entry(ep->queue.next, struct m66592_request, queue); + irq_packet_read(ep, req); + } else { + for (pipenum = 1; pipenum < M66592_MAX_NUM_PIPE; pipenum++) { + check = 1 << pipenum; + if ((status & check) && (enb & check)) { + m66592_write(m66592, ~check, M66592_BRDYSTS); + ep = m66592->pipenum2ep[pipenum]; + req = list_entry(ep->queue.next, + struct m66592_request, queue); + if (ep->ep.desc->bEndpointAddress & USB_DIR_IN) + irq_packet_write(ep, req); + else + irq_packet_read(ep, req); + } + } + } +} + +static void irq_pipe_empty(struct m66592 *m66592, u16 status, u16 enb) +{ + u16 tmp; + u16 check; + u16 pipenum; + struct m66592_ep *ep; + struct m66592_request *req; + + if ((status & M66592_BEMP0) && (enb & M66592_BEMP0)) { + m66592_write(m66592, ~M66592_BEMP0, M66592_BEMPSTS); + + ep = &m66592->ep[0]; + req = list_entry(ep->queue.next, struct m66592_request, queue); + irq_ep0_write(ep, req); + } else { + for (pipenum = 1; pipenum < M66592_MAX_NUM_PIPE; pipenum++) { + check = 1 << pipenum; + if ((status & check) && (enb & check)) { + m66592_write(m66592, ~check, M66592_BEMPSTS); + tmp = control_reg_get(m66592, pipenum); + if ((tmp & M66592_INBUFM) == 0) { + disable_irq_empty(m66592, pipenum); + pipe_irq_disable(m66592, pipenum); + pipe_stop(m66592, pipenum); + ep = m66592->pipenum2ep[pipenum]; + req = list_entry(ep->queue.next, + struct m66592_request, + queue); + if (!list_empty(&ep->queue)) + transfer_complete(ep, req, 0); + } + } + } + } +} + +static void get_status(struct m66592 *m66592, struct usb_ctrlrequest *ctrl) +__releases(m66592->lock) +__acquires(m66592->lock) +{ + struct m66592_ep *ep; + u16 pid; + u16 status = 0; + u16 w_index = le16_to_cpu(ctrl->wIndex); + + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + status = 1 << USB_DEVICE_SELF_POWERED; + break; + case USB_RECIP_INTERFACE: + status = 0; + break; + case USB_RECIP_ENDPOINT: + ep = m66592->epaddr2ep[w_index & USB_ENDPOINT_NUMBER_MASK]; + pid = control_reg_get_pid(m66592, ep->pipenum); + if (pid == M66592_PID_STALL) + status = 1 << USB_ENDPOINT_HALT; + else + status = 0; + break; + default: + pipe_stall(m66592, 0); + return; /* exit */ + } + + m66592->ep0_data = cpu_to_le16(status); + m66592->ep0_req->buf = &m66592->ep0_data; + m66592->ep0_req->length = 2; + /* AV: what happens if we get called again before that gets through? */ + spin_unlock(&m66592->lock); + m66592_queue(m66592->gadget.ep0, m66592->ep0_req, GFP_KERNEL); + spin_lock(&m66592->lock); +} + +static void clear_feature(struct m66592 *m66592, struct usb_ctrlrequest *ctrl) +{ + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + control_end(m66592, 1); + break; + case USB_RECIP_INTERFACE: + control_end(m66592, 1); + break; + case USB_RECIP_ENDPOINT: { + struct m66592_ep *ep; + struct m66592_request *req; + u16 w_index = le16_to_cpu(ctrl->wIndex); + + ep = m66592->epaddr2ep[w_index & USB_ENDPOINT_NUMBER_MASK]; + pipe_stop(m66592, ep->pipenum); + control_reg_sqclr(m66592, ep->pipenum); + + control_end(m66592, 1); + + req = list_entry(ep->queue.next, + struct m66592_request, queue); + if (ep->busy) { + ep->busy = 0; + if (list_empty(&ep->queue)) + break; + start_packet(ep, req); + } else if (!list_empty(&ep->queue)) + pipe_start(m66592, ep->pipenum); + } + break; + default: + pipe_stall(m66592, 0); + break; + } +} + +static void set_feature(struct m66592 *m66592, struct usb_ctrlrequest *ctrl) +{ + u16 tmp; + int timeout = 3000; + + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + switch (le16_to_cpu(ctrl->wValue)) { + case USB_DEVICE_TEST_MODE: + control_end(m66592, 1); + /* Wait for the completion of status stage */ + do { + tmp = m66592_read(m66592, M66592_INTSTS0) & + M66592_CTSQ; + udelay(1); + } while (tmp != M66592_CS_IDST && timeout-- > 0); + + if (tmp == M66592_CS_IDST) + m66592_bset(m66592, + le16_to_cpu(ctrl->wIndex >> 8), + M66592_TESTMODE); + break; + default: + pipe_stall(m66592, 0); + break; + } + break; + case USB_RECIP_INTERFACE: + control_end(m66592, 1); + break; + case USB_RECIP_ENDPOINT: { + struct m66592_ep *ep; + u16 w_index = le16_to_cpu(ctrl->wIndex); + + ep = m66592->epaddr2ep[w_index & USB_ENDPOINT_NUMBER_MASK]; + pipe_stall(m66592, ep->pipenum); + + control_end(m66592, 1); + } + break; + default: + pipe_stall(m66592, 0); + break; + } +} + +/* if return value is true, call class driver's setup() */ +static int setup_packet(struct m66592 *m66592, struct usb_ctrlrequest *ctrl) +{ + u16 *p = (u16 *)ctrl; + unsigned long offset = M66592_USBREQ; + int i, ret = 0; + + /* read fifo */ + m66592_write(m66592, ~M66592_VALID, M66592_INTSTS0); + + for (i = 0; i < 4; i++) + p[i] = m66592_read(m66592, offset + i*2); + + /* check request */ + if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { + switch (ctrl->bRequest) { + case USB_REQ_GET_STATUS: + get_status(m66592, ctrl); + break; + case USB_REQ_CLEAR_FEATURE: + clear_feature(m66592, ctrl); + break; + case USB_REQ_SET_FEATURE: + set_feature(m66592, ctrl); + break; + default: + ret = 1; + break; + } + } else + ret = 1; + return ret; +} + +static void m66592_update_usb_speed(struct m66592 *m66592) +{ + u16 speed = get_usb_speed(m66592); + + switch (speed) { + case M66592_HSMODE: + m66592->gadget.speed = USB_SPEED_HIGH; + break; + case M66592_FSMODE: + m66592->gadget.speed = USB_SPEED_FULL; + break; + default: + m66592->gadget.speed = USB_SPEED_UNKNOWN; + pr_err("USB speed unknown\n"); + } +} + +static void irq_device_state(struct m66592 *m66592) +{ + u16 dvsq; + + dvsq = m66592_read(m66592, M66592_INTSTS0) & M66592_DVSQ; + m66592_write(m66592, ~M66592_DVST, M66592_INTSTS0); + + if (dvsq == M66592_DS_DFLT) { /* bus reset */ + usb_gadget_udc_reset(&m66592->gadget, m66592->driver); + m66592_update_usb_speed(m66592); + } + if (m66592->old_dvsq == M66592_DS_CNFG && dvsq != M66592_DS_CNFG) + m66592_update_usb_speed(m66592); + if ((dvsq == M66592_DS_CNFG || dvsq == M66592_DS_ADDS) + && m66592->gadget.speed == USB_SPEED_UNKNOWN) + m66592_update_usb_speed(m66592); + + m66592->old_dvsq = dvsq; +} + +static void irq_control_stage(struct m66592 *m66592) +__releases(m66592->lock) +__acquires(m66592->lock) +{ + struct usb_ctrlrequest ctrl; + u16 ctsq; + + ctsq = m66592_read(m66592, M66592_INTSTS0) & M66592_CTSQ; + m66592_write(m66592, ~M66592_CTRT, M66592_INTSTS0); + + switch (ctsq) { + case M66592_CS_IDST: { + struct m66592_ep *ep; + struct m66592_request *req; + ep = &m66592->ep[0]; + req = list_entry(ep->queue.next, struct m66592_request, queue); + transfer_complete(ep, req, 0); + } + break; + + case M66592_CS_RDDS: + case M66592_CS_WRDS: + case M66592_CS_WRND: + if (setup_packet(m66592, &ctrl)) { + spin_unlock(&m66592->lock); + if (m66592->driver->setup(&m66592->gadget, &ctrl) < 0) + pipe_stall(m66592, 0); + spin_lock(&m66592->lock); + } + break; + case M66592_CS_RDSS: + case M66592_CS_WRSS: + control_end(m66592, 0); + break; + default: + pr_err("ctrl_stage: unexpect ctsq(%x)\n", ctsq); + break; + } +} + +static irqreturn_t m66592_irq(int irq, void *_m66592) +{ + struct m66592 *m66592 = _m66592; + u16 intsts0; + u16 intenb0; + u16 savepipe; + u16 mask0; + + spin_lock(&m66592->lock); + + intsts0 = m66592_read(m66592, M66592_INTSTS0); + intenb0 = m66592_read(m66592, M66592_INTENB0); + + if (m66592->pdata->on_chip && !intsts0 && !intenb0) { + /* + * When USB clock stops, it cannot read register. Even if a + * clock stops, the interrupt occurs. So this driver turn on + * a clock by this timing and do re-reading of register. + */ + m66592_start_xclock(m66592); + intsts0 = m66592_read(m66592, M66592_INTSTS0); + intenb0 = m66592_read(m66592, M66592_INTENB0); + } + + savepipe = m66592_read(m66592, M66592_CFIFOSEL); + + mask0 = intsts0 & intenb0; + if (mask0) { + u16 brdysts = m66592_read(m66592, M66592_BRDYSTS); + u16 bempsts = m66592_read(m66592, M66592_BEMPSTS); + u16 brdyenb = m66592_read(m66592, M66592_BRDYENB); + u16 bempenb = m66592_read(m66592, M66592_BEMPENB); + + if (mask0 & M66592_VBINT) { + m66592_write(m66592, 0xffff & ~M66592_VBINT, + M66592_INTSTS0); + m66592_start_xclock(m66592); + + /* start vbus sampling */ + m66592->old_vbus = m66592_read(m66592, M66592_INTSTS0) + & M66592_VBSTS; + m66592->scount = M66592_MAX_SAMPLING; + + mod_timer(&m66592->timer, + jiffies + msecs_to_jiffies(50)); + } + if (intsts0 & M66592_DVSQ) + irq_device_state(m66592); + + if ((intsts0 & M66592_BRDY) && (intenb0 & M66592_BRDYE) + && (brdysts & brdyenb)) { + irq_pipe_ready(m66592, brdysts, brdyenb); + } + if ((intsts0 & M66592_BEMP) && (intenb0 & M66592_BEMPE) + && (bempsts & bempenb)) { + irq_pipe_empty(m66592, bempsts, bempenb); + } + + if (intsts0 & M66592_CTRT) + irq_control_stage(m66592); + } + + m66592_write(m66592, savepipe, M66592_CFIFOSEL); + + spin_unlock(&m66592->lock); + return IRQ_HANDLED; +} + +static void m66592_timer(struct timer_list *t) +{ + struct m66592 *m66592 = from_timer(m66592, t, timer); + unsigned long flags; + u16 tmp; + + spin_lock_irqsave(&m66592->lock, flags); + tmp = m66592_read(m66592, M66592_SYSCFG); + if (!(tmp & M66592_RCKE)) { + m66592_bset(m66592, M66592_RCKE | M66592_PLLC, M66592_SYSCFG); + udelay(10); + m66592_bset(m66592, M66592_SCKE, M66592_SYSCFG); + } + if (m66592->scount > 0) { + tmp = m66592_read(m66592, M66592_INTSTS0) & M66592_VBSTS; + if (tmp == m66592->old_vbus) { + m66592->scount--; + if (m66592->scount == 0) { + if (tmp == M66592_VBSTS) + m66592_usb_connect(m66592); + else + m66592_usb_disconnect(m66592); + } else { + mod_timer(&m66592->timer, + jiffies + msecs_to_jiffies(50)); + } + } else { + m66592->scount = M66592_MAX_SAMPLING; + m66592->old_vbus = tmp; + mod_timer(&m66592->timer, + jiffies + msecs_to_jiffies(50)); + } + } + spin_unlock_irqrestore(&m66592->lock, flags); +} + +/*-------------------------------------------------------------------------*/ +static int m66592_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct m66592_ep *ep; + + ep = container_of(_ep, struct m66592_ep, ep); + return alloc_pipe_config(ep, desc); +} + +static int m66592_disable(struct usb_ep *_ep) +{ + struct m66592_ep *ep; + struct m66592_request *req; + unsigned long flags; + + ep = container_of(_ep, struct m66592_ep, ep); + BUG_ON(!ep); + + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct m66592_request, queue); + spin_lock_irqsave(&ep->m66592->lock, flags); + transfer_complete(ep, req, -ECONNRESET); + spin_unlock_irqrestore(&ep->m66592->lock, flags); + } + + pipe_irq_disable(ep->m66592, ep->pipenum); + return free_pipe_config(ep); +} + +static struct usb_request *m66592_alloc_request(struct usb_ep *_ep, + gfp_t gfp_flags) +{ + struct m66592_request *req; + + req = kzalloc(sizeof(struct m66592_request), gfp_flags); + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->queue); + + return &req->req; +} + +static void m66592_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct m66592_request *req; + + req = container_of(_req, struct m66592_request, req); + kfree(req); +} + +static int m66592_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t gfp_flags) +{ + struct m66592_ep *ep; + struct m66592_request *req; + unsigned long flags; + int request = 0; + + ep = container_of(_ep, struct m66592_ep, ep); + req = container_of(_req, struct m66592_request, req); + + if (ep->m66592->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + spin_lock_irqsave(&ep->m66592->lock, flags); + + if (list_empty(&ep->queue)) + request = 1; + + list_add_tail(&req->queue, &ep->queue); + req->req.actual = 0; + req->req.status = -EINPROGRESS; + + if (ep->ep.desc == NULL) /* control */ + start_ep0(ep, req); + else { + if (request && !ep->busy) + start_packet(ep, req); + } + + spin_unlock_irqrestore(&ep->m66592->lock, flags); + + return 0; +} + +static int m66592_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct m66592_ep *ep; + struct m66592_request *req; + unsigned long flags; + + ep = container_of(_ep, struct m66592_ep, ep); + req = container_of(_req, struct m66592_request, req); + + spin_lock_irqsave(&ep->m66592->lock, flags); + if (!list_empty(&ep->queue)) + transfer_complete(ep, req, -ECONNRESET); + spin_unlock_irqrestore(&ep->m66592->lock, flags); + + return 0; +} + +static int m66592_set_halt(struct usb_ep *_ep, int value) +{ + struct m66592_ep *ep = container_of(_ep, struct m66592_ep, ep); + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&ep->m66592->lock, flags); + if (!list_empty(&ep->queue)) { + ret = -EAGAIN; + } else if (value) { + ep->busy = 1; + pipe_stall(ep->m66592, ep->pipenum); + } else { + ep->busy = 0; + pipe_stop(ep->m66592, ep->pipenum); + } + spin_unlock_irqrestore(&ep->m66592->lock, flags); + return ret; +} + +static void m66592_fifo_flush(struct usb_ep *_ep) +{ + struct m66592_ep *ep; + unsigned long flags; + + ep = container_of(_ep, struct m66592_ep, ep); + spin_lock_irqsave(&ep->m66592->lock, flags); + if (list_empty(&ep->queue) && !ep->busy) { + pipe_stop(ep->m66592, ep->pipenum); + m66592_bclr(ep->m66592, M66592_BCLR, ep->fifoctr); + } + spin_unlock_irqrestore(&ep->m66592->lock, flags); +} + +static const struct usb_ep_ops m66592_ep_ops = { + .enable = m66592_enable, + .disable = m66592_disable, + + .alloc_request = m66592_alloc_request, + .free_request = m66592_free_request, + + .queue = m66592_queue, + .dequeue = m66592_dequeue, + + .set_halt = m66592_set_halt, + .fifo_flush = m66592_fifo_flush, +}; + +/*-------------------------------------------------------------------------*/ +static int m66592_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) +{ + struct m66592 *m66592 = to_m66592(g); + + /* hook up the driver */ + m66592->driver = driver; + + m66592_bset(m66592, M66592_VBSE | M66592_URST, M66592_INTENB0); + if (m66592_read(m66592, M66592_INTSTS0) & M66592_VBSTS) { + m66592_start_xclock(m66592); + /* start vbus sampling */ + m66592->old_vbus = m66592_read(m66592, + M66592_INTSTS0) & M66592_VBSTS; + m66592->scount = M66592_MAX_SAMPLING; + mod_timer(&m66592->timer, jiffies + msecs_to_jiffies(50)); + } + + return 0; +} + +static int m66592_udc_stop(struct usb_gadget *g) +{ + struct m66592 *m66592 = to_m66592(g); + + m66592_bclr(m66592, M66592_VBSE | M66592_URST, M66592_INTENB0); + + init_controller(m66592); + disable_controller(m66592); + + m66592->driver = NULL; + + return 0; +} + +/*-------------------------------------------------------------------------*/ +static int m66592_get_frame(struct usb_gadget *_gadget) +{ + struct m66592 *m66592 = gadget_to_m66592(_gadget); + return m66592_read(m66592, M66592_FRMNUM) & 0x03FF; +} + +static int m66592_pullup(struct usb_gadget *gadget, int is_on) +{ + struct m66592 *m66592 = gadget_to_m66592(gadget); + unsigned long flags; + + spin_lock_irqsave(&m66592->lock, flags); + if (is_on) + m66592_bset(m66592, M66592_DPRPU, M66592_SYSCFG); + else + m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG); + spin_unlock_irqrestore(&m66592->lock, flags); + + return 0; +} + +static const struct usb_gadget_ops m66592_gadget_ops = { + .get_frame = m66592_get_frame, + .udc_start = m66592_udc_start, + .udc_stop = m66592_udc_stop, + .pullup = m66592_pullup, +}; + +static int m66592_remove(struct platform_device *pdev) +{ + struct m66592 *m66592 = platform_get_drvdata(pdev); + + usb_del_gadget_udc(&m66592->gadget); + + del_timer_sync(&m66592->timer); + iounmap(m66592->reg); + free_irq(platform_get_irq(pdev, 0), m66592); + m66592_free_request(&m66592->ep[0].ep, m66592->ep0_req); + if (m66592->pdata->on_chip) { + clk_disable(m66592->clk); + clk_put(m66592->clk); + } + kfree(m66592); + return 0; +} + +static void nop_completion(struct usb_ep *ep, struct usb_request *r) +{ +} + +static int m66592_probe(struct platform_device *pdev) +{ + struct resource *res, *ires; + void __iomem *reg = NULL; + struct m66592 *m66592 = NULL; + char clk_name[8]; + int ret = 0; + int i; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENODEV; + pr_err("platform_get_resource error.\n"); + goto clean_up; + } + + ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!ires) { + ret = -ENODEV; + dev_err(&pdev->dev, + "platform_get_resource IORESOURCE_IRQ error.\n"); + goto clean_up; + } + + reg = ioremap(res->start, resource_size(res)); + if (reg == NULL) { + ret = -ENOMEM; + pr_err("ioremap error.\n"); + goto clean_up; + } + + if (dev_get_platdata(&pdev->dev) == NULL) { + dev_err(&pdev->dev, "no platform data\n"); + ret = -ENODEV; + goto clean_up; + } + + /* initialize ucd */ + m66592 = kzalloc(sizeof(struct m66592), GFP_KERNEL); + if (m66592 == NULL) { + ret = -ENOMEM; + goto clean_up; + } + + m66592->pdata = dev_get_platdata(&pdev->dev); + m66592->irq_trigger = ires->flags & IRQF_TRIGGER_MASK; + + spin_lock_init(&m66592->lock); + platform_set_drvdata(pdev, m66592); + + m66592->gadget.ops = &m66592_gadget_ops; + m66592->gadget.max_speed = USB_SPEED_HIGH; + m66592->gadget.name = udc_name; + + timer_setup(&m66592->timer, m66592_timer, 0); + m66592->reg = reg; + + ret = request_irq(ires->start, m66592_irq, IRQF_SHARED, + udc_name, m66592); + if (ret < 0) { + pr_err("request_irq error (%d)\n", ret); + goto clean_up; + } + + if (m66592->pdata->on_chip) { + snprintf(clk_name, sizeof(clk_name), "usbf%d", pdev->id); + m66592->clk = clk_get(&pdev->dev, clk_name); + if (IS_ERR(m66592->clk)) { + dev_err(&pdev->dev, "cannot get clock \"%s\"\n", + clk_name); + ret = PTR_ERR(m66592->clk); + goto clean_up2; + } + clk_enable(m66592->clk); + } + + INIT_LIST_HEAD(&m66592->gadget.ep_list); + m66592->gadget.ep0 = &m66592->ep[0].ep; + INIT_LIST_HEAD(&m66592->gadget.ep0->ep_list); + for (i = 0; i < M66592_MAX_NUM_PIPE; i++) { + struct m66592_ep *ep = &m66592->ep[i]; + + if (i != 0) { + INIT_LIST_HEAD(&m66592->ep[i].ep.ep_list); + list_add_tail(&m66592->ep[i].ep.ep_list, + &m66592->gadget.ep_list); + } + ep->m66592 = m66592; + INIT_LIST_HEAD(&ep->queue); + ep->ep.name = m66592_ep_name[i]; + ep->ep.ops = &m66592_ep_ops; + usb_ep_set_maxpacket_limit(&ep->ep, 512); + + if (i == 0) { + ep->ep.caps.type_control = true; + } else { + ep->ep.caps.type_iso = true; + ep->ep.caps.type_bulk = true; + ep->ep.caps.type_int = true; + } + + ep->ep.caps.dir_in = true; + ep->ep.caps.dir_out = true; + } + usb_ep_set_maxpacket_limit(&m66592->ep[0].ep, 64); + m66592->ep[0].pipenum = 0; + m66592->ep[0].fifoaddr = M66592_CFIFO; + m66592->ep[0].fifosel = M66592_CFIFOSEL; + m66592->ep[0].fifoctr = M66592_CFIFOCTR; + m66592->ep[0].fifotrn = 0; + m66592->ep[0].pipectr = get_pipectr_addr(0); + m66592->pipenum2ep[0] = &m66592->ep[0]; + m66592->epaddr2ep[0] = &m66592->ep[0]; + + m66592->ep0_req = m66592_alloc_request(&m66592->ep[0].ep, GFP_KERNEL); + if (m66592->ep0_req == NULL) { + ret = -ENOMEM; + goto clean_up3; + } + m66592->ep0_req->complete = nop_completion; + + init_controller(m66592); + + ret = usb_add_gadget_udc(&pdev->dev, &m66592->gadget); + if (ret) + goto err_add_udc; + + dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION); + return 0; + +err_add_udc: + m66592_free_request(&m66592->ep[0].ep, m66592->ep0_req); + m66592->ep0_req = NULL; +clean_up3: + if (m66592->pdata->on_chip) { + clk_disable(m66592->clk); + clk_put(m66592->clk); + } +clean_up2: + free_irq(ires->start, m66592); +clean_up: + if (m66592) { + if (m66592->ep0_req) + m66592_free_request(&m66592->ep[0].ep, m66592->ep0_req); + kfree(m66592); + } + if (reg) + iounmap(reg); + + return ret; +} + +/*-------------------------------------------------------------------------*/ +static struct platform_driver m66592_driver = { + .remove = m66592_remove, + .driver = { + .name = udc_name, + }, +}; + +module_platform_driver_probe(m66592_driver, m66592_probe); diff --git a/drivers/usb/gadget/udc/m66592-udc.h b/drivers/usb/gadget/udc/m66592-udc.h new file mode 100644 index 000000000..01a64685b --- /dev/null +++ b/drivers/usb/gadget/udc/m66592-udc.h @@ -0,0 +1,603 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * M66592 UDC (USB gadget) + * + * Copyright (C) 2006-2007 Renesas Solutions Corp. + * + * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> + */ + +#ifndef __M66592_UDC_H__ +#define __M66592_UDC_H__ + +#include <linux/clk.h> +#include <linux/usb/m66592.h> + +#define M66592_SYSCFG 0x00 +#define M66592_XTAL 0xC000 /* b15-14: Crystal selection */ +#define M66592_XTAL48 0x8000 /* 48MHz */ +#define M66592_XTAL24 0x4000 /* 24MHz */ +#define M66592_XTAL12 0x0000 /* 12MHz */ +#define M66592_XCKE 0x2000 /* b13: External clock enable */ +#define M66592_RCKE 0x1000 /* b12: Register clock enable */ +#define M66592_PLLC 0x0800 /* b11: PLL control */ +#define M66592_SCKE 0x0400 /* b10: USB clock enable */ +#define M66592_ATCKM 0x0100 /* b8: Automatic clock supply */ +#define M66592_HSE 0x0080 /* b7: Hi-speed enable */ +#define M66592_DCFM 0x0040 /* b6: Controller function select */ +#define M66592_DMRPD 0x0020 /* b5: D- pull down control */ +#define M66592_DPRPU 0x0010 /* b4: D+ pull up control */ +#define M66592_FSRPC 0x0004 /* b2: Full-speed receiver enable */ +#define M66592_PCUT 0x0002 /* b1: Low power sleep enable */ +#define M66592_USBE 0x0001 /* b0: USB module operation enable */ + +#define M66592_SYSSTS 0x02 +#define M66592_LNST 0x0003 /* b1-0: D+, D- line status */ +#define M66592_SE1 0x0003 /* SE1 */ +#define M66592_KSTS 0x0002 /* K State */ +#define M66592_JSTS 0x0001 /* J State */ +#define M66592_SE0 0x0000 /* SE0 */ + +#define M66592_DVSTCTR 0x04 +#define M66592_WKUP 0x0100 /* b8: Remote wakeup */ +#define M66592_RWUPE 0x0080 /* b7: Remote wakeup sense */ +#define M66592_USBRST 0x0040 /* b6: USB reset enable */ +#define M66592_RESUME 0x0020 /* b5: Resume enable */ +#define M66592_UACT 0x0010 /* b4: USB bus enable */ +#define M66592_RHST 0x0003 /* b1-0: Reset handshake status */ +#define M66592_HSMODE 0x0003 /* Hi-Speed mode */ +#define M66592_FSMODE 0x0002 /* Full-Speed mode */ +#define M66592_HSPROC 0x0001 /* HS handshake is processing */ + +#define M66592_TESTMODE 0x06 +#define M66592_UTST 0x000F /* b4-0: Test select */ +#define M66592_H_TST_PACKET 0x000C /* HOST TEST Packet */ +#define M66592_H_TST_SE0_NAK 0x000B /* HOST TEST SE0 NAK */ +#define M66592_H_TST_K 0x000A /* HOST TEST K */ +#define M66592_H_TST_J 0x0009 /* HOST TEST J */ +#define M66592_H_TST_NORMAL 0x0000 /* HOST Normal Mode */ +#define M66592_P_TST_PACKET 0x0004 /* PERI TEST Packet */ +#define M66592_P_TST_SE0_NAK 0x0003 /* PERI TEST SE0 NAK */ +#define M66592_P_TST_K 0x0002 /* PERI TEST K */ +#define M66592_P_TST_J 0x0001 /* PERI TEST J */ +#define M66592_P_TST_NORMAL 0x0000 /* PERI Normal Mode */ + +/* built-in registers */ +#define M66592_CFBCFG 0x0A +#define M66592_D0FBCFG 0x0C +#define M66592_LITTLE 0x0100 /* b8: Little endian mode */ +/* external chip case */ +#define M66592_PINCFG 0x0A +#define M66592_LDRV 0x8000 /* b15: Drive Current Adjust */ +#define M66592_BIGEND 0x0100 /* b8: Big endian mode */ + +#define M66592_DMA0CFG 0x0C +#define M66592_DMA1CFG 0x0E +#define M66592_DREQA 0x4000 /* b14: Dreq active select */ +#define M66592_BURST 0x2000 /* b13: Burst mode */ +#define M66592_DACKA 0x0400 /* b10: Dack active select */ +#define M66592_DFORM 0x0380 /* b9-7: DMA mode select */ +#define M66592_CPU_ADR_RD_WR 0x0000 /* Address + RD/WR mode (CPU bus) */ +#define M66592_CPU_DACK_RD_WR 0x0100 /* DACK + RD/WR mode (CPU bus) */ +#define M66592_CPU_DACK_ONLY 0x0180 /* DACK only mode (CPU bus) */ +#define M66592_SPLIT_DACK_ONLY 0x0200 /* DACK only mode (SPLIT bus) */ +#define M66592_SPLIT_DACK_DSTB 0x0300 /* DACK + DSTB0 mode (SPLIT bus) */ +#define M66592_DENDA 0x0040 /* b6: Dend active select */ +#define M66592_PKTM 0x0020 /* b5: Packet mode */ +#define M66592_DENDE 0x0010 /* b4: Dend enable */ +#define M66592_OBUS 0x0004 /* b2: OUTbus mode */ + +/* common case */ +#define M66592_CFIFO 0x10 +#define M66592_D0FIFO 0x14 +#define M66592_D1FIFO 0x18 + +#define M66592_CFIFOSEL 0x1E +#define M66592_D0FIFOSEL 0x24 +#define M66592_D1FIFOSEL 0x2A +#define M66592_RCNT 0x8000 /* b15: Read count mode */ +#define M66592_REW 0x4000 /* b14: Buffer rewind */ +#define M66592_DCLRM 0x2000 /* b13: DMA buffer clear mode */ +#define M66592_DREQE 0x1000 /* b12: DREQ output enable */ +#define M66592_MBW_8 0x0000 /* 8bit */ +#define M66592_MBW_16 0x0400 /* 16bit */ +#define M66592_MBW_32 0x0800 /* 32bit */ +#define M66592_TRENB 0x0200 /* b9: Transaction counter enable */ +#define M66592_TRCLR 0x0100 /* b8: Transaction counter clear */ +#define M66592_DEZPM 0x0080 /* b7: Zero-length packet mode */ +#define M66592_ISEL 0x0020 /* b5: DCP FIFO port direction select */ +#define M66592_CURPIPE 0x0007 /* b2-0: PIPE select */ + +#define M66592_CFIFOCTR 0x20 +#define M66592_D0FIFOCTR 0x26 +#define M66592_D1FIFOCTR 0x2c +#define M66592_BVAL 0x8000 /* b15: Buffer valid flag */ +#define M66592_BCLR 0x4000 /* b14: Buffer clear */ +#define M66592_FRDY 0x2000 /* b13: FIFO ready */ +#define M66592_DTLN 0x0FFF /* b11-0: FIFO received data length */ + +#define M66592_CFIFOSIE 0x22 +#define M66592_TGL 0x8000 /* b15: Buffer toggle */ +#define M66592_SCLR 0x4000 /* b14: Buffer clear */ +#define M66592_SBUSY 0x2000 /* b13: SIE_FIFO busy */ + +#define M66592_D0FIFOTRN 0x28 +#define M66592_D1FIFOTRN 0x2E +#define M66592_TRNCNT 0xFFFF /* b15-0: Transaction counter */ + +#define M66592_INTENB0 0x30 +#define M66592_VBSE 0x8000 /* b15: VBUS interrupt */ +#define M66592_RSME 0x4000 /* b14: Resume interrupt */ +#define M66592_SOFE 0x2000 /* b13: Frame update interrupt */ +#define M66592_DVSE 0x1000 /* b12: Device state transition interrupt */ +#define M66592_CTRE 0x0800 /* b11: Control transfer stage transition irq */ +#define M66592_BEMPE 0x0400 /* b10: Buffer empty interrupt */ +#define M66592_NRDYE 0x0200 /* b9: Buffer not ready interrupt */ +#define M66592_BRDYE 0x0100 /* b8: Buffer ready interrupt */ +#define M66592_URST 0x0080 /* b7: USB reset detected interrupt */ +#define M66592_SADR 0x0040 /* b6: Set address executed interrupt */ +#define M66592_SCFG 0x0020 /* b5: Set configuration executed interrupt */ +#define M66592_SUSP 0x0010 /* b4: Suspend detected interrupt */ +#define M66592_WDST 0x0008 /* b3: Control write data stage completed irq */ +#define M66592_RDST 0x0004 /* b2: Control read data stage completed irq */ +#define M66592_CMPL 0x0002 /* b1: Control transfer complete interrupt */ +#define M66592_SERR 0x0001 /* b0: Sequence error interrupt */ + +#define M66592_INTENB1 0x32 +#define M66592_BCHGE 0x4000 /* b14: USB us chenge interrupt */ +#define M66592_DTCHE 0x1000 /* b12: Detach sense interrupt */ +#define M66592_SIGNE 0x0020 /* b5: SETUP IGNORE interrupt */ +#define M66592_SACKE 0x0010 /* b4: SETUP ACK interrupt */ +#define M66592_BRDYM 0x0004 /* b2: BRDY clear timing */ +#define M66592_INTL 0x0002 /* b1: Interrupt sense select */ +#define M66592_PCSE 0x0001 /* b0: PCUT enable by CS assert */ + +#define M66592_BRDYENB 0x36 +#define M66592_BRDYSTS 0x46 +#define M66592_BRDY7 0x0080 /* b7: PIPE7 */ +#define M66592_BRDY6 0x0040 /* b6: PIPE6 */ +#define M66592_BRDY5 0x0020 /* b5: PIPE5 */ +#define M66592_BRDY4 0x0010 /* b4: PIPE4 */ +#define M66592_BRDY3 0x0008 /* b3: PIPE3 */ +#define M66592_BRDY2 0x0004 /* b2: PIPE2 */ +#define M66592_BRDY1 0x0002 /* b1: PIPE1 */ +#define M66592_BRDY0 0x0001 /* b1: PIPE0 */ + +#define M66592_NRDYENB 0x38 +#define M66592_NRDYSTS 0x48 +#define M66592_NRDY7 0x0080 /* b7: PIPE7 */ +#define M66592_NRDY6 0x0040 /* b6: PIPE6 */ +#define M66592_NRDY5 0x0020 /* b5: PIPE5 */ +#define M66592_NRDY4 0x0010 /* b4: PIPE4 */ +#define M66592_NRDY3 0x0008 /* b3: PIPE3 */ +#define M66592_NRDY2 0x0004 /* b2: PIPE2 */ +#define M66592_NRDY1 0x0002 /* b1: PIPE1 */ +#define M66592_NRDY0 0x0001 /* b1: PIPE0 */ + +#define M66592_BEMPENB 0x3A +#define M66592_BEMPSTS 0x4A +#define M66592_BEMP7 0x0080 /* b7: PIPE7 */ +#define M66592_BEMP6 0x0040 /* b6: PIPE6 */ +#define M66592_BEMP5 0x0020 /* b5: PIPE5 */ +#define M66592_BEMP4 0x0010 /* b4: PIPE4 */ +#define M66592_BEMP3 0x0008 /* b3: PIPE3 */ +#define M66592_BEMP2 0x0004 /* b2: PIPE2 */ +#define M66592_BEMP1 0x0002 /* b1: PIPE1 */ +#define M66592_BEMP0 0x0001 /* b0: PIPE0 */ + +#define M66592_SOFCFG 0x3C +#define M66592_SOFM 0x000C /* b3-2: SOF palse mode */ +#define M66592_SOF_125US 0x0008 /* SOF OUT 125us uFrame Signal */ +#define M66592_SOF_1MS 0x0004 /* SOF OUT 1ms Frame Signal */ +#define M66592_SOF_DISABLE 0x0000 /* SOF OUT Disable */ + +#define M66592_INTSTS0 0x40 +#define M66592_VBINT 0x8000 /* b15: VBUS interrupt */ +#define M66592_RESM 0x4000 /* b14: Resume interrupt */ +#define M66592_SOFR 0x2000 /* b13: SOF frame update interrupt */ +#define M66592_DVST 0x1000 /* b12: Device state transition */ +#define M66592_CTRT 0x0800 /* b11: Control stage transition */ +#define M66592_BEMP 0x0400 /* b10: Buffer empty interrupt */ +#define M66592_NRDY 0x0200 /* b9: Buffer not ready interrupt */ +#define M66592_BRDY 0x0100 /* b8: Buffer ready interrupt */ +#define M66592_VBSTS 0x0080 /* b7: VBUS input port */ +#define M66592_DVSQ 0x0070 /* b6-4: Device state */ +#define M66592_DS_SPD_CNFG 0x0070 /* Suspend Configured */ +#define M66592_DS_SPD_ADDR 0x0060 /* Suspend Address */ +#define M66592_DS_SPD_DFLT 0x0050 /* Suspend Default */ +#define M66592_DS_SPD_POWR 0x0040 /* Suspend Powered */ +#define M66592_DS_SUSP 0x0040 /* Suspend */ +#define M66592_DS_CNFG 0x0030 /* Configured */ +#define M66592_DS_ADDS 0x0020 /* Address */ +#define M66592_DS_DFLT 0x0010 /* Default */ +#define M66592_DS_POWR 0x0000 /* Powered */ +#define M66592_DVSQS 0x0030 /* b5-4: Device state */ +#define M66592_VALID 0x0008 /* b3: Setup packet detected flag */ +#define M66592_CTSQ 0x0007 /* b2-0: Control transfer stage */ +#define M66592_CS_SQER 0x0006 /* Sequence error */ +#define M66592_CS_WRND 0x0005 /* Control write nodata status */ +#define M66592_CS_WRSS 0x0004 /* Control write status stage */ +#define M66592_CS_WRDS 0x0003 /* Control write data stage */ +#define M66592_CS_RDSS 0x0002 /* Control read status stage */ +#define M66592_CS_RDDS 0x0001 /* Control read data stage */ +#define M66592_CS_IDST 0x0000 /* Idle or setup stage */ + +#define M66592_INTSTS1 0x42 +#define M66592_BCHG 0x4000 /* b14: USB bus chenge interrupt */ +#define M66592_DTCH 0x1000 /* b12: Detach sense interrupt */ +#define M66592_SIGN 0x0020 /* b5: SETUP IGNORE interrupt */ +#define M66592_SACK 0x0010 /* b4: SETUP ACK interrupt */ + +#define M66592_FRMNUM 0x4C +#define M66592_OVRN 0x8000 /* b15: Overrun error */ +#define M66592_CRCE 0x4000 /* b14: Received data error */ +#define M66592_SOFRM 0x0800 /* b11: SOF output mode */ +#define M66592_FRNM 0x07FF /* b10-0: Frame number */ + +#define M66592_UFRMNUM 0x4E +#define M66592_UFRNM 0x0007 /* b2-0: Micro frame number */ + +#define M66592_RECOVER 0x50 +#define M66592_STSRECOV 0x0700 /* Status recovery */ +#define M66592_STSR_HI 0x0400 /* FULL(0) or HI(1) Speed */ +#define M66592_STSR_DEFAULT 0x0100 /* Default state */ +#define M66592_STSR_ADDRESS 0x0200 /* Address state */ +#define M66592_STSR_CONFIG 0x0300 /* Configured state */ +#define M66592_USBADDR 0x007F /* b6-0: USB address */ + +#define M66592_USBREQ 0x54 +#define M66592_bRequest 0xFF00 /* b15-8: bRequest */ +#define M66592_GET_STATUS 0x0000 +#define M66592_CLEAR_FEATURE 0x0100 +#define M66592_ReqRESERVED 0x0200 +#define M66592_SET_FEATURE 0x0300 +#define M66592_ReqRESERVED1 0x0400 +#define M66592_SET_ADDRESS 0x0500 +#define M66592_GET_DESCRIPTOR 0x0600 +#define M66592_SET_DESCRIPTOR 0x0700 +#define M66592_GET_CONFIGURATION 0x0800 +#define M66592_SET_CONFIGURATION 0x0900 +#define M66592_GET_INTERFACE 0x0A00 +#define M66592_SET_INTERFACE 0x0B00 +#define M66592_SYNCH_FRAME 0x0C00 +#define M66592_bmRequestType 0x00FF /* b7-0: bmRequestType */ +#define M66592_bmRequestTypeDir 0x0080 /* b7 : Data direction */ +#define M66592_HOST_TO_DEVICE 0x0000 +#define M66592_DEVICE_TO_HOST 0x0080 +#define M66592_bmRequestTypeType 0x0060 /* b6-5: Type */ +#define M66592_STANDARD 0x0000 +#define M66592_CLASS 0x0020 +#define M66592_VENDOR 0x0040 +#define M66592_bmRequestTypeRecip 0x001F /* b4-0: Recipient */ +#define M66592_DEVICE 0x0000 +#define M66592_INTERFACE 0x0001 +#define M66592_ENDPOINT 0x0002 + +#define M66592_USBVAL 0x56 +#define M66592_wValue 0xFFFF /* b15-0: wValue */ +/* Standard Feature Selector */ +#define M66592_ENDPOINT_HALT 0x0000 +#define M66592_DEVICE_REMOTE_WAKEUP 0x0001 +#define M66592_TEST_MODE 0x0002 +/* Descriptor Types */ +#define M66592_DT_TYPE 0xFF00 +#define M66592_GET_DT_TYPE(v) (((v) & DT_TYPE) >> 8) +#define M66592_DT_DEVICE 0x01 +#define M66592_DT_CONFIGURATION 0x02 +#define M66592_DT_STRING 0x03 +#define M66592_DT_INTERFACE 0x04 +#define M66592_DT_ENDPOINT 0x05 +#define M66592_DT_DEVICE_QUALIFIER 0x06 +#define M66592_DT_OTHER_SPEED_CONFIGURATION 0x07 +#define M66592_DT_INTERFACE_POWER 0x08 +#define M66592_DT_INDEX 0x00FF +#define M66592_CONF_NUM 0x00FF +#define M66592_ALT_SET 0x00FF + +#define M66592_USBINDEX 0x58 +#define M66592_wIndex 0xFFFF /* b15-0: wIndex */ +#define M66592_TEST_SELECT 0xFF00 /* b15-b8: Test Mode */ +#define M66592_TEST_J 0x0100 /* Test_J */ +#define M66592_TEST_K 0x0200 /* Test_K */ +#define M66592_TEST_SE0_NAK 0x0300 /* Test_SE0_NAK */ +#define M66592_TEST_PACKET 0x0400 /* Test_Packet */ +#define M66592_TEST_FORCE_ENABLE 0x0500 /* Test_Force_Enable */ +#define M66592_TEST_STSelectors 0x0600 /* Standard test selectors */ +#define M66592_TEST_Reserved 0x4000 /* Reserved */ +#define M66592_TEST_VSTModes 0xC000 /* Vendor-specific tests */ +#define M66592_EP_DIR 0x0080 /* b7: Endpoint Direction */ +#define M66592_EP_DIR_IN 0x0080 +#define M66592_EP_DIR_OUT 0x0000 + +#define M66592_USBLENG 0x5A +#define M66592_wLength 0xFFFF /* b15-0: wLength */ + +#define M66592_DCPCFG 0x5C +#define M66592_CNTMD 0x0100 /* b8: Continuous transfer mode */ +#define M66592_DIR 0x0010 /* b4: Control transfer DIR select */ + +#define M66592_DCPMAXP 0x5E +#define M66592_DEVSEL 0xC000 /* b15-14: Device address select */ +#define M66592_DEVICE_0 0x0000 /* Device address 0 */ +#define M66592_DEVICE_1 0x4000 /* Device address 1 */ +#define M66592_DEVICE_2 0x8000 /* Device address 2 */ +#define M66592_DEVICE_3 0xC000 /* Device address 3 */ +#define M66592_MAXP 0x007F /* b6-0: Maxpacket size of ep0 */ + +#define M66592_DCPCTR 0x60 +#define M66592_BSTS 0x8000 /* b15: Buffer status */ +#define M66592_SUREQ 0x4000 /* b14: Send USB request */ +#define M66592_SQCLR 0x0100 /* b8: Sequence toggle bit clear */ +#define M66592_SQSET 0x0080 /* b7: Sequence toggle bit set */ +#define M66592_SQMON 0x0040 /* b6: Sequence toggle bit monitor */ +#define M66592_CCPL 0x0004 /* b2: control transfer complete */ +#define M66592_PID 0x0003 /* b1-0: Response PID */ +#define M66592_PID_STALL 0x0002 /* STALL */ +#define M66592_PID_BUF 0x0001 /* BUF */ +#define M66592_PID_NAK 0x0000 /* NAK */ + +#define M66592_PIPESEL 0x64 +#define M66592_PIPENM 0x0007 /* b2-0: Pipe select */ +#define M66592_PIPE0 0x0000 /* PIPE 0 */ +#define M66592_PIPE1 0x0001 /* PIPE 1 */ +#define M66592_PIPE2 0x0002 /* PIPE 2 */ +#define M66592_PIPE3 0x0003 /* PIPE 3 */ +#define M66592_PIPE4 0x0004 /* PIPE 4 */ +#define M66592_PIPE5 0x0005 /* PIPE 5 */ +#define M66592_PIPE6 0x0006 /* PIPE 6 */ +#define M66592_PIPE7 0x0007 /* PIPE 7 */ + +#define M66592_PIPECFG 0x66 +#define M66592_TYP 0xC000 /* b15-14: Transfer type */ +#define M66592_ISO 0xC000 /* Isochronous */ +#define M66592_INT 0x8000 /* Interrupt */ +#define M66592_BULK 0x4000 /* Bulk */ +#define M66592_BFRE 0x0400 /* b10: Buffer ready interrupt mode */ +#define M66592_DBLB 0x0200 /* b9: Double buffer mode select */ +#define M66592_CNTMD 0x0100 /* b8: Continuous transfer mode */ +#define M66592_SHTNAK 0x0080 /* b7: Transfer end NAK */ +#define M66592_DIR 0x0010 /* b4: Transfer direction select */ +#define M66592_DIR_H_OUT 0x0010 /* HOST OUT */ +#define M66592_DIR_P_IN 0x0010 /* PERI IN */ +#define M66592_DIR_H_IN 0x0000 /* HOST IN */ +#define M66592_DIR_P_OUT 0x0000 /* PERI OUT */ +#define M66592_EPNUM 0x000F /* b3-0: Eendpoint number select */ +#define M66592_EP1 0x0001 +#define M66592_EP2 0x0002 +#define M66592_EP3 0x0003 +#define M66592_EP4 0x0004 +#define M66592_EP5 0x0005 +#define M66592_EP6 0x0006 +#define M66592_EP7 0x0007 +#define M66592_EP8 0x0008 +#define M66592_EP9 0x0009 +#define M66592_EP10 0x000A +#define M66592_EP11 0x000B +#define M66592_EP12 0x000C +#define M66592_EP13 0x000D +#define M66592_EP14 0x000E +#define M66592_EP15 0x000F + +#define M66592_PIPEBUF 0x68 +#define M66592_BUFSIZE 0x7C00 /* b14-10: Pipe buffer size */ +#define M66592_BUF_SIZE(x) ((((x) / 64) - 1) << 10) +#define M66592_BUFNMB 0x00FF /* b7-0: Pipe buffer number */ + +#define M66592_PIPEMAXP 0x6A +#define M66592_MXPS 0x07FF /* b10-0: Maxpacket size */ + +#define M66592_PIPEPERI 0x6C +#define M66592_IFIS 0x1000 /* b12: ISO in-buffer flush mode */ +#define M66592_IITV 0x0007 /* b2-0: ISO interval */ + +#define M66592_PIPE1CTR 0x70 +#define M66592_PIPE2CTR 0x72 +#define M66592_PIPE3CTR 0x74 +#define M66592_PIPE4CTR 0x76 +#define M66592_PIPE5CTR 0x78 +#define M66592_PIPE6CTR 0x7A +#define M66592_PIPE7CTR 0x7C +#define M66592_BSTS 0x8000 /* b15: Buffer status */ +#define M66592_INBUFM 0x4000 /* b14: IN buffer monitor (PIPE 1-5) */ +#define M66592_ACLRM 0x0200 /* b9: Out buffer auto clear mode */ +#define M66592_SQCLR 0x0100 /* b8: Sequence toggle bit clear */ +#define M66592_SQSET 0x0080 /* b7: Sequence toggle bit set */ +#define M66592_SQMON 0x0040 /* b6: Sequence toggle bit monitor */ +#define M66592_PID 0x0003 /* b1-0: Response PID */ + +#define M66592_INVALID_REG 0x7E + + +#define get_pipectr_addr(pipenum) (M66592_PIPE1CTR + (pipenum - 1) * 2) + +#define M66592_MAX_SAMPLING 10 + +#define M66592_MAX_NUM_PIPE 8 +#define M66592_MAX_NUM_BULK 3 +#define M66592_MAX_NUM_ISOC 2 +#define M66592_MAX_NUM_INT 2 + +#define M66592_BASE_PIPENUM_BULK 3 +#define M66592_BASE_PIPENUM_ISOC 1 +#define M66592_BASE_PIPENUM_INT 6 + +#define M66592_BASE_BUFNUM 6 +#define M66592_MAX_BUFNUM 0x4F + +struct m66592_pipe_info { + u16 pipe; + u16 epnum; + u16 maxpacket; + u16 type; + u16 interval; + u16 dir_in; +}; + +struct m66592_request { + struct usb_request req; + struct list_head queue; +}; + +struct m66592_ep { + struct usb_ep ep; + struct m66592 *m66592; + + struct list_head queue; + unsigned busy:1; + unsigned internal_ccpl:1; /* use only control */ + + /* this member can able to after m66592_enable */ + unsigned use_dma:1; + u16 pipenum; + u16 type; + + /* register address */ + unsigned long fifoaddr; + unsigned long fifosel; + unsigned long fifoctr; + unsigned long fifotrn; + unsigned long pipectr; +}; + +struct m66592 { + spinlock_t lock; + void __iomem *reg; + struct clk *clk; + struct m66592_platdata *pdata; + unsigned long irq_trigger; + + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + + struct m66592_ep ep[M66592_MAX_NUM_PIPE]; + struct m66592_ep *pipenum2ep[M66592_MAX_NUM_PIPE]; + struct m66592_ep *epaddr2ep[16]; + + struct usb_request *ep0_req; /* for internal request */ + __le16 ep0_data; /* for internal request */ + u16 old_vbus; + + struct timer_list timer; + + int scount; + + int old_dvsq; + + /* pipe config */ + int bulk; + int interrupt; + int isochronous; + int num_dma; +}; +#define to_m66592(g) (container_of((g), struct m66592, gadget)) + +#define gadget_to_m66592(_gadget) container_of(_gadget, struct m66592, gadget) +#define m66592_to_gadget(m66592) (&m66592->gadget) + +#define is_bulk_pipe(pipenum) \ + ((pipenum >= M66592_BASE_PIPENUM_BULK) && \ + (pipenum < (M66592_BASE_PIPENUM_BULK + M66592_MAX_NUM_BULK))) +#define is_interrupt_pipe(pipenum) \ + ((pipenum >= M66592_BASE_PIPENUM_INT) && \ + (pipenum < (M66592_BASE_PIPENUM_INT + M66592_MAX_NUM_INT))) +#define is_isoc_pipe(pipenum) \ + ((pipenum >= M66592_BASE_PIPENUM_ISOC) && \ + (pipenum < (M66592_BASE_PIPENUM_ISOC + M66592_MAX_NUM_ISOC))) + +#define enable_irq_ready(m66592, pipenum) \ + enable_pipe_irq(m66592, pipenum, M66592_BRDYENB) +#define disable_irq_ready(m66592, pipenum) \ + disable_pipe_irq(m66592, pipenum, M66592_BRDYENB) +#define enable_irq_empty(m66592, pipenum) \ + enable_pipe_irq(m66592, pipenum, M66592_BEMPENB) +#define disable_irq_empty(m66592, pipenum) \ + disable_pipe_irq(m66592, pipenum, M66592_BEMPENB) +#define enable_irq_nrdy(m66592, pipenum) \ + enable_pipe_irq(m66592, pipenum, M66592_NRDYENB) +#define disable_irq_nrdy(m66592, pipenum) \ + disable_pipe_irq(m66592, pipenum, M66592_NRDYENB) + +/*-------------------------------------------------------------------------*/ +static inline u16 m66592_read(struct m66592 *m66592, unsigned long offset) +{ + return ioread16(m66592->reg + offset); +} + +static inline void m66592_read_fifo(struct m66592 *m66592, + unsigned long offset, + void *buf, unsigned long len) +{ + void __iomem *fifoaddr = m66592->reg + offset; + + if (m66592->pdata->on_chip) { + len = (len + 3) / 4; + ioread32_rep(fifoaddr, buf, len); + } else { + len = (len + 1) / 2; + ioread16_rep(fifoaddr, buf, len); + } +} + +static inline void m66592_write(struct m66592 *m66592, u16 val, + unsigned long offset) +{ + iowrite16(val, m66592->reg + offset); +} + +static inline void m66592_mdfy(struct m66592 *m66592, u16 val, u16 pat, + unsigned long offset) +{ + u16 tmp; + tmp = m66592_read(m66592, offset); + tmp = tmp & (~pat); + tmp = tmp | val; + m66592_write(m66592, tmp, offset); +} + +#define m66592_bclr(m66592, val, offset) \ + m66592_mdfy(m66592, 0, val, offset) +#define m66592_bset(m66592, val, offset) \ + m66592_mdfy(m66592, val, 0, offset) + +static inline void m66592_write_fifo(struct m66592 *m66592, + struct m66592_ep *ep, + void *buf, unsigned long len) +{ + void __iomem *fifoaddr = m66592->reg + ep->fifoaddr; + + if (m66592->pdata->on_chip) { + unsigned long count; + unsigned char *pb; + int i; + + count = len / 4; + iowrite32_rep(fifoaddr, buf, count); + + if (len & 0x00000003) { + pb = buf + count * 4; + for (i = 0; i < (len & 0x00000003); i++) { + if (m66592_read(m66592, M66592_CFBCFG)) /* le */ + iowrite8(pb[i], fifoaddr + (3 - i)); + else + iowrite8(pb[i], fifoaddr + i); + } + } + } else { + unsigned long odd = len & 0x0001; + + len = len / 2; + iowrite16_rep(fifoaddr, buf, len); + if (odd) { + unsigned char *p = buf + len*2; + if (m66592->pdata->wr0_shorted_to_wr1) + m66592_bclr(m66592, M66592_MBW_16, ep->fifosel); + iowrite8(*p, fifoaddr); + if (m66592->pdata->wr0_shorted_to_wr1) + m66592_bset(m66592, M66592_MBW_16, ep->fifosel); + } + } +} + +#endif /* ifndef __M66592_UDC_H__ */ + + diff --git a/drivers/usb/gadget/udc/max3420_udc.c b/drivers/usb/gadget/udc/max3420_udc.c new file mode 100644 index 000000000..ddf0ed3eb --- /dev/null +++ b/drivers/usb/gadget/udc/max3420_udc.c @@ -0,0 +1,1332 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * MAX3420 Device Controller driver for USB. + * + * Author: Jaswinder Singh Brar <jaswinder.singh@linaro.org> + * (C) Copyright 2019-2020 Linaro Ltd + * + * Based on: + * o MAX3420E datasheet + * https://datasheets.maximintegrated.com/en/ds/MAX3420E.pdf + * o MAX342{0,1}E Programming Guides + * https://pdfserv.maximintegrated.com/en/an/AN3598.pdf + * https://pdfserv.maximintegrated.com/en/an/AN3785.pdf + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/bitfield.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> +#include <linux/of_irq.h> +#include <linux/prefetch.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/spi/spi.h> +#include <linux/gpio/consumer.h> + +#define MAX3420_MAX_EPS 4 +#define MAX3420_EP_MAX_PACKET 64 /* Same for all Endpoints */ +#define MAX3420_EPNAME_SIZE 16 /* Buffer size for endpoint name */ + +#define MAX3420_ACKSTAT BIT(0) + +#define MAX3420_SPI_DIR_RD 0 /* read register from MAX3420 */ +#define MAX3420_SPI_DIR_WR 1 /* write register to MAX3420 */ + +/* SPI commands: */ +#define MAX3420_SPI_DIR_SHIFT 1 +#define MAX3420_SPI_REG_SHIFT 3 + +#define MAX3420_REG_EP0FIFO 0 +#define MAX3420_REG_EP1FIFO 1 +#define MAX3420_REG_EP2FIFO 2 +#define MAX3420_REG_EP3FIFO 3 +#define MAX3420_REG_SUDFIFO 4 +#define MAX3420_REG_EP0BC 5 +#define MAX3420_REG_EP1BC 6 +#define MAX3420_REG_EP2BC 7 +#define MAX3420_REG_EP3BC 8 + +#define MAX3420_REG_EPSTALLS 9 + #define ACKSTAT BIT(6) + #define STLSTAT BIT(5) + #define STLEP3IN BIT(4) + #define STLEP2IN BIT(3) + #define STLEP1OUT BIT(2) + #define STLEP0OUT BIT(1) + #define STLEP0IN BIT(0) + +#define MAX3420_REG_CLRTOGS 10 + #define EP3DISAB BIT(7) + #define EP2DISAB BIT(6) + #define EP1DISAB BIT(5) + #define CTGEP3IN BIT(4) + #define CTGEP2IN BIT(3) + #define CTGEP1OUT BIT(2) + +#define MAX3420_REG_EPIRQ 11 +#define MAX3420_REG_EPIEN 12 + #define SUDAVIRQ BIT(5) + #define IN3BAVIRQ BIT(4) + #define IN2BAVIRQ BIT(3) + #define OUT1DAVIRQ BIT(2) + #define OUT0DAVIRQ BIT(1) + #define IN0BAVIRQ BIT(0) + +#define MAX3420_REG_USBIRQ 13 +#define MAX3420_REG_USBIEN 14 + #define OSCOKIRQ BIT(0) + #define RWUDNIRQ BIT(1) + #define BUSACTIRQ BIT(2) + #define URESIRQ BIT(3) + #define SUSPIRQ BIT(4) + #define NOVBUSIRQ BIT(5) + #define VBUSIRQ BIT(6) + #define URESDNIRQ BIT(7) + +#define MAX3420_REG_USBCTL 15 + #define HOSCSTEN BIT(7) + #define VBGATE BIT(6) + #define CHIPRES BIT(5) + #define PWRDOWN BIT(4) + #define CONNECT BIT(3) + #define SIGRWU BIT(2) + +#define MAX3420_REG_CPUCTL 16 + #define IE BIT(0) + +#define MAX3420_REG_PINCTL 17 + #define EP3INAK BIT(7) + #define EP2INAK BIT(6) + #define EP0INAK BIT(5) + #define FDUPSPI BIT(4) + #define INTLEVEL BIT(3) + #define POSINT BIT(2) + #define GPXB BIT(1) + #define GPXA BIT(0) + +#define MAX3420_REG_REVISION 18 + +#define MAX3420_REG_FNADDR 19 + #define FNADDR_MASK 0x7f + +#define MAX3420_REG_IOPINS 20 +#define MAX3420_REG_IOPINS2 21 +#define MAX3420_REG_GPINIRQ 22 +#define MAX3420_REG_GPINIEN 23 +#define MAX3420_REG_GPINPOL 24 +#define MAX3420_REG_HIRQ 25 +#define MAX3420_REG_HIEN 26 +#define MAX3420_REG_MODE 27 +#define MAX3420_REG_PERADDR 28 +#define MAX3420_REG_HCTL 29 +#define MAX3420_REG_HXFR 30 +#define MAX3420_REG_HRSL 31 + +#define ENABLE_IRQ BIT(0) +#define IOPIN_UPDATE BIT(1) +#define REMOTE_WAKEUP BIT(2) +#define CONNECT_HOST GENMASK(4, 3) +#define HCONNECT (1 << 3) +#define HDISCONNECT (3 << 3) +#define UDC_START GENMASK(6, 5) +#define START (1 << 5) +#define STOP (3 << 5) +#define ENABLE_EP GENMASK(8, 7) +#define ENABLE (1 << 7) +#define DISABLE (3 << 7) +#define STALL_EP GENMASK(10, 9) +#define STALL (1 << 9) +#define UNSTALL (3 << 9) + +#define MAX3420_CMD(c) FIELD_PREP(GENMASK(7, 3), c) +#define MAX3420_SPI_CMD_RD(c) (MAX3420_CMD(c) | (0 << 1)) +#define MAX3420_SPI_CMD_WR(c) (MAX3420_CMD(c) | (1 << 1)) + +struct max3420_req { + struct usb_request usb_req; + struct list_head queue; + struct max3420_ep *ep; +}; + +struct max3420_ep { + struct usb_ep ep_usb; + struct max3420_udc *udc; + struct list_head queue; + char name[MAX3420_EPNAME_SIZE]; + unsigned int maxpacket; + spinlock_t lock; + int halted; + u32 todo; + int id; +}; + +struct max3420_udc { + struct usb_gadget gadget; + struct max3420_ep ep[MAX3420_MAX_EPS]; + struct usb_gadget_driver *driver; + struct task_struct *thread_task; + int remote_wkp, is_selfpowered; + bool vbus_active, softconnect; + struct usb_ctrlrequest setup; + struct mutex spi_bus_mutex; + struct max3420_req ep0req; + struct spi_device *spi; + struct device *dev; + spinlock_t lock; + bool suspended; + u8 ep0buf[64]; + u32 todo; +}; + +#define to_max3420_req(r) container_of((r), struct max3420_req, usb_req) +#define to_max3420_ep(e) container_of((e), struct max3420_ep, ep_usb) +#define to_udc(g) container_of((g), struct max3420_udc, gadget) + +#define DRIVER_DESC "MAX3420 USB Device-Mode Driver" +static const char driver_name[] = "max3420-udc"; + +/* Control endpoint configuration.*/ +static const struct usb_endpoint_descriptor ep0_desc = { + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_CONTROL, + .wMaxPacketSize = cpu_to_le16(MAX3420_EP_MAX_PACKET), +}; + +static void spi_ack_ctrl(struct max3420_udc *udc) +{ + struct spi_device *spi = udc->spi; + struct spi_transfer transfer; + struct spi_message msg; + u8 txdata[1]; + + memset(&transfer, 0, sizeof(transfer)); + + spi_message_init(&msg); + + txdata[0] = MAX3420_ACKSTAT; + transfer.tx_buf = txdata; + transfer.len = 1; + + spi_message_add_tail(&transfer, &msg); + spi_sync(spi, &msg); +} + +static u8 spi_rd8_ack(struct max3420_udc *udc, u8 reg, int actstat) +{ + struct spi_device *spi = udc->spi; + struct spi_transfer transfer; + struct spi_message msg; + u8 txdata[2], rxdata[2]; + + memset(&transfer, 0, sizeof(transfer)); + + spi_message_init(&msg); + + txdata[0] = MAX3420_SPI_CMD_RD(reg) | (actstat ? MAX3420_ACKSTAT : 0); + transfer.tx_buf = txdata; + transfer.rx_buf = rxdata; + transfer.len = 2; + + spi_message_add_tail(&transfer, &msg); + spi_sync(spi, &msg); + + return rxdata[1]; +} + +static u8 spi_rd8(struct max3420_udc *udc, u8 reg) +{ + return spi_rd8_ack(udc, reg, 0); +} + +static void spi_wr8_ack(struct max3420_udc *udc, u8 reg, u8 val, int actstat) +{ + struct spi_device *spi = udc->spi; + struct spi_transfer transfer; + struct spi_message msg; + u8 txdata[2]; + + memset(&transfer, 0, sizeof(transfer)); + + spi_message_init(&msg); + + txdata[0] = MAX3420_SPI_CMD_WR(reg) | (actstat ? MAX3420_ACKSTAT : 0); + txdata[1] = val; + + transfer.tx_buf = txdata; + transfer.len = 2; + + spi_message_add_tail(&transfer, &msg); + spi_sync(spi, &msg); +} + +static void spi_wr8(struct max3420_udc *udc, u8 reg, u8 val) +{ + spi_wr8_ack(udc, reg, val, 0); +} + +static void spi_rd_buf(struct max3420_udc *udc, u8 reg, void *buf, u8 len) +{ + struct spi_device *spi = udc->spi; + struct spi_transfer transfer; + struct spi_message msg; + u8 local_buf[MAX3420_EP_MAX_PACKET + 1] = {}; + + memset(&transfer, 0, sizeof(transfer)); + + spi_message_init(&msg); + + local_buf[0] = MAX3420_SPI_CMD_RD(reg); + transfer.tx_buf = &local_buf[0]; + transfer.rx_buf = &local_buf[0]; + transfer.len = len + 1; + + spi_message_add_tail(&transfer, &msg); + spi_sync(spi, &msg); + + memcpy(buf, &local_buf[1], len); +} + +static void spi_wr_buf(struct max3420_udc *udc, u8 reg, void *buf, u8 len) +{ + struct spi_device *spi = udc->spi; + struct spi_transfer transfer; + struct spi_message msg; + u8 local_buf[MAX3420_EP_MAX_PACKET + 1] = {}; + + memset(&transfer, 0, sizeof(transfer)); + + spi_message_init(&msg); + + local_buf[0] = MAX3420_SPI_CMD_WR(reg); + memcpy(&local_buf[1], buf, len); + + transfer.tx_buf = local_buf; + transfer.len = len + 1; + + spi_message_add_tail(&transfer, &msg); + spi_sync(spi, &msg); +} + +static int spi_max3420_enable(struct max3420_ep *ep) +{ + struct max3420_udc *udc = ep->udc; + unsigned long flags; + u8 epdis, epien; + int todo; + + spin_lock_irqsave(&ep->lock, flags); + todo = ep->todo & ENABLE_EP; + ep->todo &= ~ENABLE_EP; + spin_unlock_irqrestore(&ep->lock, flags); + + if (!todo || ep->id == 0) + return false; + + epien = spi_rd8(udc, MAX3420_REG_EPIEN); + epdis = spi_rd8(udc, MAX3420_REG_CLRTOGS); + + if (todo == ENABLE) { + epdis &= ~BIT(ep->id + 4); + epien |= BIT(ep->id + 1); + } else { + epdis |= BIT(ep->id + 4); + epien &= ~BIT(ep->id + 1); + } + + spi_wr8(udc, MAX3420_REG_CLRTOGS, epdis); + spi_wr8(udc, MAX3420_REG_EPIEN, epien); + + return true; +} + +static int spi_max3420_stall(struct max3420_ep *ep) +{ + struct max3420_udc *udc = ep->udc; + unsigned long flags; + u8 epstalls; + int todo; + + spin_lock_irqsave(&ep->lock, flags); + todo = ep->todo & STALL_EP; + ep->todo &= ~STALL_EP; + spin_unlock_irqrestore(&ep->lock, flags); + + if (!todo || ep->id == 0) + return false; + + epstalls = spi_rd8(udc, MAX3420_REG_EPSTALLS); + if (todo == STALL) { + ep->halted = 1; + epstalls |= BIT(ep->id + 1); + } else { + u8 clrtogs; + + ep->halted = 0; + epstalls &= ~BIT(ep->id + 1); + clrtogs = spi_rd8(udc, MAX3420_REG_CLRTOGS); + clrtogs |= BIT(ep->id + 1); + spi_wr8(udc, MAX3420_REG_CLRTOGS, clrtogs); + } + spi_wr8(udc, MAX3420_REG_EPSTALLS, epstalls | ACKSTAT); + + return true; +} + +static int spi_max3420_rwkup(struct max3420_udc *udc) +{ + unsigned long flags; + int wake_remote; + u8 usbctl; + + spin_lock_irqsave(&udc->lock, flags); + wake_remote = udc->todo & REMOTE_WAKEUP; + udc->todo &= ~REMOTE_WAKEUP; + spin_unlock_irqrestore(&udc->lock, flags); + + if (!wake_remote || !udc->suspended) + return false; + + /* Set Remote-WkUp Signal*/ + usbctl = spi_rd8(udc, MAX3420_REG_USBCTL); + usbctl |= SIGRWU; + spi_wr8(udc, MAX3420_REG_USBCTL, usbctl); + + msleep_interruptible(5); + + /* Clear Remote-WkUp Signal*/ + usbctl = spi_rd8(udc, MAX3420_REG_USBCTL); + usbctl &= ~SIGRWU; + spi_wr8(udc, MAX3420_REG_USBCTL, usbctl); + + udc->suspended = false; + + return true; +} + +static void max3420_nuke(struct max3420_ep *ep, int status); +static void __max3420_stop(struct max3420_udc *udc) +{ + u8 val; + int i; + + /* clear all pending requests */ + for (i = 1; i < MAX3420_MAX_EPS; i++) + max3420_nuke(&udc->ep[i], -ECONNRESET); + + /* Disable IRQ to CPU */ + spi_wr8(udc, MAX3420_REG_CPUCTL, 0); + + val = spi_rd8(udc, MAX3420_REG_USBCTL); + val |= PWRDOWN; + if (udc->is_selfpowered) + val &= ~HOSCSTEN; + else + val |= HOSCSTEN; + spi_wr8(udc, MAX3420_REG_USBCTL, val); +} + +static void __max3420_start(struct max3420_udc *udc) +{ + u8 val; + + /* Need this delay if bus-powered, + * but even for self-powered it helps stability + */ + msleep_interruptible(250); + + /* configure SPI */ + spi_wr8(udc, MAX3420_REG_PINCTL, FDUPSPI); + + /* Chip Reset */ + spi_wr8(udc, MAX3420_REG_USBCTL, CHIPRES); + msleep_interruptible(5); + spi_wr8(udc, MAX3420_REG_USBCTL, 0); + + /* Poll for OSC to stabilize */ + while (1) { + val = spi_rd8(udc, MAX3420_REG_USBIRQ); + if (val & OSCOKIRQ) + break; + cond_resched(); + } + + /* Enable PULL-UP only when Vbus detected */ + val = spi_rd8(udc, MAX3420_REG_USBCTL); + val |= VBGATE | CONNECT; + spi_wr8(udc, MAX3420_REG_USBCTL, val); + + val = URESDNIRQ | URESIRQ; + if (udc->is_selfpowered) + val |= NOVBUSIRQ; + spi_wr8(udc, MAX3420_REG_USBIEN, val); + + /* Enable only EP0 interrupts */ + val = IN0BAVIRQ | OUT0DAVIRQ | SUDAVIRQ; + spi_wr8(udc, MAX3420_REG_EPIEN, val); + + /* Enable IRQ to CPU */ + spi_wr8(udc, MAX3420_REG_CPUCTL, IE); +} + +static int max3420_start(struct max3420_udc *udc) +{ + unsigned long flags; + int todo; + + spin_lock_irqsave(&udc->lock, flags); + todo = udc->todo & UDC_START; + udc->todo &= ~UDC_START; + spin_unlock_irqrestore(&udc->lock, flags); + + if (!todo) + return false; + + if (udc->vbus_active && udc->softconnect) + __max3420_start(udc); + else + __max3420_stop(udc); + + return true; +} + +static irqreturn_t max3420_vbus_handler(int irq, void *dev_id) +{ + struct max3420_udc *udc = dev_id; + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + /* its a vbus change interrupt */ + udc->vbus_active = !udc->vbus_active; + udc->todo |= UDC_START; + usb_udc_vbus_handler(&udc->gadget, udc->vbus_active); + usb_gadget_set_state(&udc->gadget, udc->vbus_active + ? USB_STATE_POWERED : USB_STATE_NOTATTACHED); + spin_unlock_irqrestore(&udc->lock, flags); + + if (udc->thread_task) + wake_up_process(udc->thread_task); + + return IRQ_HANDLED; +} + +static irqreturn_t max3420_irq_handler(int irq, void *dev_id) +{ + struct max3420_udc *udc = dev_id; + struct spi_device *spi = udc->spi; + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + if ((udc->todo & ENABLE_IRQ) == 0) { + disable_irq_nosync(spi->irq); + udc->todo |= ENABLE_IRQ; + } + spin_unlock_irqrestore(&udc->lock, flags); + + if (udc->thread_task) + wake_up_process(udc->thread_task); + + return IRQ_HANDLED; +} + +static void max3420_getstatus(struct max3420_udc *udc) +{ + struct max3420_ep *ep; + u16 status = 0; + + switch (udc->setup.bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + /* Get device status */ + status = udc->gadget.is_selfpowered << USB_DEVICE_SELF_POWERED; + status |= (udc->remote_wkp << USB_DEVICE_REMOTE_WAKEUP); + break; + case USB_RECIP_INTERFACE: + if (udc->driver->setup(&udc->gadget, &udc->setup) < 0) + goto stall; + break; + case USB_RECIP_ENDPOINT: + ep = &udc->ep[udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK]; + if (udc->setup.wIndex & USB_DIR_IN) { + if (!ep->ep_usb.caps.dir_in) + goto stall; + } else { + if (!ep->ep_usb.caps.dir_out) + goto stall; + } + if (ep->halted) + status = 1 << USB_ENDPOINT_HALT; + break; + default: + goto stall; + } + + status = cpu_to_le16(status); + spi_wr_buf(udc, MAX3420_REG_EP0FIFO, &status, 2); + spi_wr8_ack(udc, MAX3420_REG_EP0BC, 2, 1); + return; +stall: + dev_err(udc->dev, "Can't respond to getstatus request\n"); + spi_wr8(udc, MAX3420_REG_EPSTALLS, STLEP0IN | STLEP0OUT | STLSTAT); +} + +static void max3420_set_clear_feature(struct max3420_udc *udc) +{ + struct max3420_ep *ep; + int set = udc->setup.bRequest == USB_REQ_SET_FEATURE; + unsigned long flags; + int id; + + switch (udc->setup.bRequestType) { + case USB_RECIP_DEVICE: + if (udc->setup.wValue != USB_DEVICE_REMOTE_WAKEUP) + break; + + if (udc->setup.bRequest == USB_REQ_SET_FEATURE) + udc->remote_wkp = 1; + else + udc->remote_wkp = 0; + + return spi_ack_ctrl(udc); + + case USB_RECIP_ENDPOINT: + if (udc->setup.wValue != USB_ENDPOINT_HALT) + break; + + id = udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK; + ep = &udc->ep[id]; + + spin_lock_irqsave(&ep->lock, flags); + ep->todo &= ~STALL_EP; + if (set) + ep->todo |= STALL; + else + ep->todo |= UNSTALL; + spin_unlock_irqrestore(&ep->lock, flags); + + spi_max3420_stall(ep); + return; + default: + break; + } + + dev_err(udc->dev, "Can't respond to SET/CLEAR FEATURE\n"); + spi_wr8(udc, MAX3420_REG_EPSTALLS, STLEP0IN | STLEP0OUT | STLSTAT); +} + +static void max3420_handle_setup(struct max3420_udc *udc) +{ + struct usb_ctrlrequest setup; + + spi_rd_buf(udc, MAX3420_REG_SUDFIFO, (void *)&setup, 8); + + udc->setup = setup; + udc->setup.wValue = cpu_to_le16(setup.wValue); + udc->setup.wIndex = cpu_to_le16(setup.wIndex); + udc->setup.wLength = cpu_to_le16(setup.wLength); + + switch (udc->setup.bRequest) { + case USB_REQ_GET_STATUS: + /* Data+Status phase form udc */ + if ((udc->setup.bRequestType & + (USB_DIR_IN | USB_TYPE_MASK)) != + (USB_DIR_IN | USB_TYPE_STANDARD)) { + break; + } + return max3420_getstatus(udc); + case USB_REQ_SET_ADDRESS: + /* Status phase from udc */ + if (udc->setup.bRequestType != (USB_DIR_OUT | + USB_TYPE_STANDARD | USB_RECIP_DEVICE)) { + break; + } + spi_rd8_ack(udc, MAX3420_REG_FNADDR, 1); + dev_dbg(udc->dev, "Assigned Address=%d\n", udc->setup.wValue); + return; + case USB_REQ_CLEAR_FEATURE: + case USB_REQ_SET_FEATURE: + /* Requests with no data phase, status phase from udc */ + if ((udc->setup.bRequestType & USB_TYPE_MASK) + != USB_TYPE_STANDARD) + break; + return max3420_set_clear_feature(udc); + default: + break; + } + + if (udc->driver->setup(&udc->gadget, &setup) < 0) { + /* Stall EP0 */ + spi_wr8(udc, MAX3420_REG_EPSTALLS, + STLEP0IN | STLEP0OUT | STLSTAT); + } +} + +static void max3420_req_done(struct max3420_req *req, int status) +{ + struct max3420_ep *ep = req->ep; + struct max3420_udc *udc = ep->udc; + + if (req->usb_req.status == -EINPROGRESS) + req->usb_req.status = status; + else + status = req->usb_req.status; + + if (status && status != -ESHUTDOWN) + dev_err(udc->dev, "%s done %p, status %d\n", + ep->ep_usb.name, req, status); + + if (req->usb_req.complete) + req->usb_req.complete(&ep->ep_usb, &req->usb_req); +} + +static int max3420_do_data(struct max3420_udc *udc, int ep_id, int in) +{ + struct max3420_ep *ep = &udc->ep[ep_id]; + struct max3420_req *req; + int done, length, psz; + void *buf; + + if (list_empty(&ep->queue)) + return false; + + req = list_first_entry(&ep->queue, struct max3420_req, queue); + buf = req->usb_req.buf + req->usb_req.actual; + + psz = ep->ep_usb.maxpacket; + length = req->usb_req.length - req->usb_req.actual; + length = min(length, psz); + + if (length == 0) { + done = 1; + goto xfer_done; + } + + done = 0; + if (in) { + prefetch(buf); + spi_wr_buf(udc, MAX3420_REG_EP0FIFO + ep_id, buf, length); + spi_wr8(udc, MAX3420_REG_EP0BC + ep_id, length); + if (length < psz) + done = 1; + } else { + psz = spi_rd8(udc, MAX3420_REG_EP0BC + ep_id); + length = min(length, psz); + prefetchw(buf); + spi_rd_buf(udc, MAX3420_REG_EP0FIFO + ep_id, buf, length); + if (length < ep->ep_usb.maxpacket) + done = 1; + } + + req->usb_req.actual += length; + + if (req->usb_req.actual == req->usb_req.length) + done = 1; + +xfer_done: + if (done) { + unsigned long flags; + + spin_lock_irqsave(&ep->lock, flags); + list_del_init(&req->queue); + spin_unlock_irqrestore(&ep->lock, flags); + + if (ep_id == 0) + spi_ack_ctrl(udc); + + max3420_req_done(req, 0); + } + + return true; +} + +static int max3420_handle_irqs(struct max3420_udc *udc) +{ + u8 epien, epirq, usbirq, usbien, reg[4]; + bool ret = false; + + spi_rd_buf(udc, MAX3420_REG_EPIRQ, reg, 4); + epirq = reg[0]; + epien = reg[1]; + usbirq = reg[2]; + usbien = reg[3]; + + usbirq &= usbien; + epirq &= epien; + + if (epirq & SUDAVIRQ) { + spi_wr8(udc, MAX3420_REG_EPIRQ, SUDAVIRQ); + max3420_handle_setup(udc); + return true; + } + + if (usbirq & VBUSIRQ) { + spi_wr8(udc, MAX3420_REG_USBIRQ, VBUSIRQ); + dev_dbg(udc->dev, "Cable plugged in\n"); + return true; + } + + if (usbirq & NOVBUSIRQ) { + spi_wr8(udc, MAX3420_REG_USBIRQ, NOVBUSIRQ); + dev_dbg(udc->dev, "Cable pulled out\n"); + return true; + } + + if (usbirq & URESIRQ) { + spi_wr8(udc, MAX3420_REG_USBIRQ, URESIRQ); + dev_dbg(udc->dev, "USB Reset - Start\n"); + return true; + } + + if (usbirq & URESDNIRQ) { + spi_wr8(udc, MAX3420_REG_USBIRQ, URESDNIRQ); + dev_dbg(udc->dev, "USB Reset - END\n"); + spi_wr8(udc, MAX3420_REG_USBIEN, URESDNIRQ | URESIRQ); + spi_wr8(udc, MAX3420_REG_EPIEN, SUDAVIRQ | IN0BAVIRQ + | OUT0DAVIRQ); + return true; + } + + if (usbirq & SUSPIRQ) { + spi_wr8(udc, MAX3420_REG_USBIRQ, SUSPIRQ); + dev_dbg(udc->dev, "USB Suspend - Enter\n"); + udc->suspended = true; + return true; + } + + if (usbirq & BUSACTIRQ) { + spi_wr8(udc, MAX3420_REG_USBIRQ, BUSACTIRQ); + dev_dbg(udc->dev, "USB Suspend - Exit\n"); + udc->suspended = false; + return true; + } + + if (usbirq & RWUDNIRQ) { + spi_wr8(udc, MAX3420_REG_USBIRQ, RWUDNIRQ); + dev_dbg(udc->dev, "Asked Host to wakeup\n"); + return true; + } + + if (usbirq & OSCOKIRQ) { + spi_wr8(udc, MAX3420_REG_USBIRQ, OSCOKIRQ); + dev_dbg(udc->dev, "Osc stabilized, start work\n"); + return true; + } + + if (epirq & OUT0DAVIRQ && max3420_do_data(udc, 0, 0)) { + spi_wr8_ack(udc, MAX3420_REG_EPIRQ, OUT0DAVIRQ, 1); + ret = true; + } + + if (epirq & IN0BAVIRQ && max3420_do_data(udc, 0, 1)) + ret = true; + + if (epirq & OUT1DAVIRQ && max3420_do_data(udc, 1, 0)) { + spi_wr8_ack(udc, MAX3420_REG_EPIRQ, OUT1DAVIRQ, 1); + ret = true; + } + + if (epirq & IN2BAVIRQ && max3420_do_data(udc, 2, 1)) + ret = true; + + if (epirq & IN3BAVIRQ && max3420_do_data(udc, 3, 1)) + ret = true; + + return ret; +} + +static int max3420_thread(void *dev_id) +{ + struct max3420_udc *udc = dev_id; + struct spi_device *spi = udc->spi; + int i, loop_again = 1; + unsigned long flags; + + while (!kthread_should_stop()) { + if (!loop_again) { + ktime_t kt = ns_to_ktime(1000 * 1000 * 250); /* 250ms */ + + set_current_state(TASK_INTERRUPTIBLE); + + spin_lock_irqsave(&udc->lock, flags); + if (udc->todo & ENABLE_IRQ) { + enable_irq(spi->irq); + udc->todo &= ~ENABLE_IRQ; + } + spin_unlock_irqrestore(&udc->lock, flags); + + schedule_hrtimeout(&kt, HRTIMER_MODE_REL); + } + loop_again = 0; + + mutex_lock(&udc->spi_bus_mutex); + + /* If bus-vbus_active and disconnected */ + if (!udc->vbus_active || !udc->softconnect) + goto loop; + + if (max3420_start(udc)) { + loop_again = 1; + goto loop; + } + + if (max3420_handle_irqs(udc)) { + loop_again = 1; + goto loop; + } + + if (spi_max3420_rwkup(udc)) { + loop_again = 1; + goto loop; + } + + max3420_do_data(udc, 0, 1); /* get done with the EP0 ZLP */ + + for (i = 1; i < MAX3420_MAX_EPS; i++) { + struct max3420_ep *ep = &udc->ep[i]; + + if (spi_max3420_enable(ep)) + loop_again = 1; + if (spi_max3420_stall(ep)) + loop_again = 1; + } +loop: + mutex_unlock(&udc->spi_bus_mutex); + } + + set_current_state(TASK_RUNNING); + dev_info(udc->dev, "SPI thread exiting\n"); + return 0; +} + +static int max3420_ep_set_halt(struct usb_ep *_ep, int stall) +{ + struct max3420_ep *ep = to_max3420_ep(_ep); + struct max3420_udc *udc = ep->udc; + unsigned long flags; + + spin_lock_irqsave(&ep->lock, flags); + + ep->todo &= ~STALL_EP; + if (stall) + ep->todo |= STALL; + else + ep->todo |= UNSTALL; + + spin_unlock_irqrestore(&ep->lock, flags); + + wake_up_process(udc->thread_task); + + dev_dbg(udc->dev, "%sStall %s\n", stall ? "" : "Un", ep->name); + return 0; +} + +static int __max3420_ep_enable(struct max3420_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + unsigned int maxp = usb_endpoint_maxp(desc); + unsigned long flags; + + spin_lock_irqsave(&ep->lock, flags); + ep->ep_usb.desc = desc; + ep->ep_usb.maxpacket = maxp; + + ep->todo &= ~ENABLE_EP; + ep->todo |= ENABLE; + spin_unlock_irqrestore(&ep->lock, flags); + + return 0; +} + +static int max3420_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct max3420_ep *ep = to_max3420_ep(_ep); + struct max3420_udc *udc = ep->udc; + + __max3420_ep_enable(ep, desc); + + wake_up_process(udc->thread_task); + + return 0; +} + +static void max3420_nuke(struct max3420_ep *ep, int status) +{ + struct max3420_req *req, *r; + unsigned long flags; + + spin_lock_irqsave(&ep->lock, flags); + + list_for_each_entry_safe(req, r, &ep->queue, queue) { + list_del_init(&req->queue); + + spin_unlock_irqrestore(&ep->lock, flags); + max3420_req_done(req, status); + spin_lock_irqsave(&ep->lock, flags); + } + + spin_unlock_irqrestore(&ep->lock, flags); +} + +static void __max3420_ep_disable(struct max3420_ep *ep) +{ + struct max3420_udc *udc = ep->udc; + unsigned long flags; + + spin_lock_irqsave(&ep->lock, flags); + + ep->ep_usb.desc = NULL; + + ep->todo &= ~ENABLE_EP; + ep->todo |= DISABLE; + + spin_unlock_irqrestore(&ep->lock, flags); + + dev_dbg(udc->dev, "Disabled %s\n", ep->name); +} + +static int max3420_ep_disable(struct usb_ep *_ep) +{ + struct max3420_ep *ep = to_max3420_ep(_ep); + struct max3420_udc *udc = ep->udc; + + max3420_nuke(ep, -ESHUTDOWN); + + __max3420_ep_disable(ep); + + wake_up_process(udc->thread_task); + + return 0; +} + +static struct usb_request *max3420_alloc_request(struct usb_ep *_ep, + gfp_t gfp_flags) +{ + struct max3420_ep *ep = to_max3420_ep(_ep); + struct max3420_req *req; + + req = kzalloc(sizeof(*req), gfp_flags); + if (!req) + return NULL; + + req->ep = ep; + + return &req->usb_req; +} + +static void max3420_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + kfree(to_max3420_req(_req)); +} + +static int max3420_ep_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t ignored) +{ + struct max3420_req *req = to_max3420_req(_req); + struct max3420_ep *ep = to_max3420_ep(_ep); + struct max3420_udc *udc = ep->udc; + unsigned long flags; + + _req->status = -EINPROGRESS; + _req->actual = 0; + + spin_lock_irqsave(&ep->lock, flags); + list_add_tail(&req->queue, &ep->queue); + spin_unlock_irqrestore(&ep->lock, flags); + + wake_up_process(udc->thread_task); + return 0; +} + +static int max3420_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct max3420_req *t = NULL; + struct max3420_req *req = to_max3420_req(_req); + struct max3420_req *iter; + struct max3420_ep *ep = to_max3420_ep(_ep); + unsigned long flags; + + spin_lock_irqsave(&ep->lock, flags); + + /* Pluck the descriptor from queue */ + list_for_each_entry(iter, &ep->queue, queue) { + if (iter != req) + continue; + list_del_init(&req->queue); + t = iter; + break; + } + + spin_unlock_irqrestore(&ep->lock, flags); + + if (t) + max3420_req_done(req, -ECONNRESET); + + return 0; +} + +static const struct usb_ep_ops max3420_ep_ops = { + .enable = max3420_ep_enable, + .disable = max3420_ep_disable, + .alloc_request = max3420_alloc_request, + .free_request = max3420_free_request, + .queue = max3420_ep_queue, + .dequeue = max3420_ep_dequeue, + .set_halt = max3420_ep_set_halt, +}; + +static int max3420_wakeup(struct usb_gadget *gadget) +{ + struct max3420_udc *udc = to_udc(gadget); + unsigned long flags; + int ret = -EINVAL; + + spin_lock_irqsave(&udc->lock, flags); + + /* Only if wakeup allowed by host */ + if (udc->remote_wkp) { + udc->todo |= REMOTE_WAKEUP; + ret = 0; + } + + spin_unlock_irqrestore(&udc->lock, flags); + + if (udc->thread_task) + wake_up_process(udc->thread_task); + return ret; +} + +static int max3420_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct max3420_udc *udc = to_udc(gadget); + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + /* hook up the driver */ + udc->driver = driver; + udc->gadget.speed = USB_SPEED_FULL; + + udc->gadget.is_selfpowered = udc->is_selfpowered; + udc->remote_wkp = 0; + udc->softconnect = true; + udc->todo |= UDC_START; + spin_unlock_irqrestore(&udc->lock, flags); + + if (udc->thread_task) + wake_up_process(udc->thread_task); + + return 0; +} + +static int max3420_udc_stop(struct usb_gadget *gadget) +{ + struct max3420_udc *udc = to_udc(gadget); + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + udc->is_selfpowered = udc->gadget.is_selfpowered; + udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->driver = NULL; + udc->softconnect = false; + udc->todo |= UDC_START; + spin_unlock_irqrestore(&udc->lock, flags); + + if (udc->thread_task) + wake_up_process(udc->thread_task); + + return 0; +} + +static const struct usb_gadget_ops max3420_udc_ops = { + .udc_start = max3420_udc_start, + .udc_stop = max3420_udc_stop, + .wakeup = max3420_wakeup, +}; + +static void max3420_eps_init(struct max3420_udc *udc) +{ + int idx; + + INIT_LIST_HEAD(&udc->gadget.ep_list); + + for (idx = 0; idx < MAX3420_MAX_EPS; idx++) { + struct max3420_ep *ep = &udc->ep[idx]; + + spin_lock_init(&ep->lock); + INIT_LIST_HEAD(&ep->queue); + + ep->udc = udc; + ep->id = idx; + ep->halted = 0; + ep->maxpacket = 0; + ep->ep_usb.name = ep->name; + ep->ep_usb.ops = &max3420_ep_ops; + usb_ep_set_maxpacket_limit(&ep->ep_usb, MAX3420_EP_MAX_PACKET); + + if (idx == 0) { /* For EP0 */ + ep->ep_usb.desc = &ep0_desc; + ep->ep_usb.maxpacket = usb_endpoint_maxp(&ep0_desc); + ep->ep_usb.caps.type_control = true; + ep->ep_usb.caps.dir_in = true; + ep->ep_usb.caps.dir_out = true; + snprintf(ep->name, MAX3420_EPNAME_SIZE, "ep0"); + continue; + } + + if (idx == 1) { /* EP1 is OUT */ + ep->ep_usb.caps.dir_in = false; + ep->ep_usb.caps.dir_out = true; + snprintf(ep->name, MAX3420_EPNAME_SIZE, "ep1-bulk-out"); + } else { /* EP2 & EP3 are IN */ + ep->ep_usb.caps.dir_in = true; + ep->ep_usb.caps.dir_out = false; + snprintf(ep->name, MAX3420_EPNAME_SIZE, + "ep%d-bulk-in", idx); + } + ep->ep_usb.caps.type_iso = false; + ep->ep_usb.caps.type_int = false; + ep->ep_usb.caps.type_bulk = true; + + list_add_tail(&ep->ep_usb.ep_list, + &udc->gadget.ep_list); + } +} + +static int max3420_probe(struct spi_device *spi) +{ + struct max3420_udc *udc; + int err, irq; + u8 reg[8]; + + if (spi->master->flags & SPI_MASTER_HALF_DUPLEX) { + dev_err(&spi->dev, "UDC needs full duplex to work\n"); + return -EINVAL; + } + + spi->mode = SPI_MODE_3; + spi->bits_per_word = 8; + + err = spi_setup(spi); + if (err) { + dev_err(&spi->dev, "Unable to setup SPI bus\n"); + return -EFAULT; + } + + udc = devm_kzalloc(&spi->dev, sizeof(*udc), GFP_KERNEL); + if (!udc) + return -ENOMEM; + + udc->spi = spi; + + udc->remote_wkp = 0; + + /* Setup gadget structure */ + udc->gadget.ops = &max3420_udc_ops; + udc->gadget.max_speed = USB_SPEED_FULL; + udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->gadget.ep0 = &udc->ep[0].ep_usb; + udc->gadget.name = driver_name; + + spin_lock_init(&udc->lock); + mutex_init(&udc->spi_bus_mutex); + + udc->ep0req.ep = &udc->ep[0]; + udc->ep0req.usb_req.buf = udc->ep0buf; + INIT_LIST_HEAD(&udc->ep0req.queue); + + /* setup Endpoints */ + max3420_eps_init(udc); + + /* configure SPI */ + spi_rd_buf(udc, MAX3420_REG_EPIRQ, reg, 8); + spi_wr8(udc, MAX3420_REG_PINCTL, FDUPSPI); + + err = usb_add_gadget_udc(&spi->dev, &udc->gadget); + if (err) + return err; + + udc->dev = &udc->gadget.dev; + + spi_set_drvdata(spi, udc); + + irq = of_irq_get_byname(spi->dev.of_node, "udc"); + err = devm_request_irq(&spi->dev, irq, max3420_irq_handler, 0, + "max3420", udc); + if (err < 0) + goto del_gadget; + + udc->thread_task = kthread_create(max3420_thread, udc, + "max3420-thread"); + if (IS_ERR(udc->thread_task)) { + err = PTR_ERR(udc->thread_task); + goto del_gadget; + } + + irq = of_irq_get_byname(spi->dev.of_node, "vbus"); + if (irq <= 0) { /* no vbus irq implies self-powered design */ + udc->is_selfpowered = 1; + udc->vbus_active = true; + udc->todo |= UDC_START; + usb_udc_vbus_handler(&udc->gadget, udc->vbus_active); + usb_gadget_set_state(&udc->gadget, USB_STATE_POWERED); + max3420_start(udc); + } else { + udc->is_selfpowered = 0; + /* Detect current vbus status */ + spi_rd_buf(udc, MAX3420_REG_EPIRQ, reg, 8); + if (reg[7] != 0xff) + udc->vbus_active = true; + + err = devm_request_irq(&spi->dev, irq, + max3420_vbus_handler, 0, "vbus", udc); + if (err < 0) + goto del_gadget; + } + + return 0; + +del_gadget: + usb_del_gadget_udc(&udc->gadget); + return err; +} + +static void max3420_remove(struct spi_device *spi) +{ + struct max3420_udc *udc = spi_get_drvdata(spi); + unsigned long flags; + + usb_del_gadget_udc(&udc->gadget); + + spin_lock_irqsave(&udc->lock, flags); + + kthread_stop(udc->thread_task); + + spin_unlock_irqrestore(&udc->lock, flags); +} + +static const struct of_device_id max3420_udc_of_match[] = { + { .compatible = "maxim,max3420-udc"}, + { .compatible = "maxim,max3421-udc"}, + {}, +}; +MODULE_DEVICE_TABLE(of, max3420_udc_of_match); + +static struct spi_driver max3420_driver = { + .driver = { + .name = "max3420-udc", + .of_match_table = of_match_ptr(max3420_udc_of_match), + }, + .probe = max3420_probe, + .remove = max3420_remove, +}; + +module_spi_driver(max3420_driver); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Jassi Brar <jaswinder.singh@linaro.org>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/udc/mv_u3d.h b/drivers/usb/gadget/udc/mv_u3d.h new file mode 100644 index 000000000..66b84f792 --- /dev/null +++ b/drivers/usb/gadget/udc/mv_u3d.h @@ -0,0 +1,317 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + */ + +#ifndef __MV_U3D_H +#define __MV_U3D_H + +#define MV_U3D_EP_CONTEXT_ALIGNMENT 32 +#define MV_U3D_TRB_ALIGNMENT 16 +#define MV_U3D_DMA_BOUNDARY 4096 +#define MV_U3D_EP0_MAX_PKT_SIZE 512 + +/* ep0 transfer state */ +#define MV_U3D_WAIT_FOR_SETUP 0 +#define MV_U3D_DATA_STATE_XMIT 1 +#define MV_U3D_DATA_STATE_NEED_ZLP 2 +#define MV_U3D_WAIT_FOR_OUT_STATUS 3 +#define MV_U3D_DATA_STATE_RECV 4 +#define MV_U3D_STATUS_STAGE 5 + +#define MV_U3D_EP_MAX_LENGTH_TRANSFER 0x10000 + +/* USB3 Interrupt Status */ +#define MV_U3D_USBINT_SETUP 0x00000001 +#define MV_U3D_USBINT_RX_COMPLETE 0x00000002 +#define MV_U3D_USBINT_TX_COMPLETE 0x00000004 +#define MV_U3D_USBINT_UNDER_RUN 0x00000008 +#define MV_U3D_USBINT_RXDESC_ERR 0x00000010 +#define MV_U3D_USBINT_TXDESC_ERR 0x00000020 +#define MV_U3D_USBINT_RX_TRB_COMPLETE 0x00000040 +#define MV_U3D_USBINT_TX_TRB_COMPLETE 0x00000080 +#define MV_U3D_USBINT_VBUS_VALID 0x00010000 +#define MV_U3D_USBINT_STORAGE_CMD_FULL 0x00020000 +#define MV_U3D_USBINT_LINK_CHG 0x01000000 + +/* USB3 Interrupt Enable */ +#define MV_U3D_INTR_ENABLE_SETUP 0x00000001 +#define MV_U3D_INTR_ENABLE_RX_COMPLETE 0x00000002 +#define MV_U3D_INTR_ENABLE_TX_COMPLETE 0x00000004 +#define MV_U3D_INTR_ENABLE_UNDER_RUN 0x00000008 +#define MV_U3D_INTR_ENABLE_RXDESC_ERR 0x00000010 +#define MV_U3D_INTR_ENABLE_TXDESC_ERR 0x00000020 +#define MV_U3D_INTR_ENABLE_RX_TRB_COMPLETE 0x00000040 +#define MV_U3D_INTR_ENABLE_TX_TRB_COMPLETE 0x00000080 +#define MV_U3D_INTR_ENABLE_RX_BUFFER_ERR 0x00000100 +#define MV_U3D_INTR_ENABLE_VBUS_VALID 0x00010000 +#define MV_U3D_INTR_ENABLE_STORAGE_CMD_FULL 0x00020000 +#define MV_U3D_INTR_ENABLE_LINK_CHG 0x01000000 +#define MV_U3D_INTR_ENABLE_PRIME_STATUS 0x02000000 + +/* USB3 Link Change */ +#define MV_U3D_LINK_CHANGE_LINK_UP 0x00000001 +#define MV_U3D_LINK_CHANGE_SUSPEND 0x00000002 +#define MV_U3D_LINK_CHANGE_RESUME 0x00000004 +#define MV_U3D_LINK_CHANGE_WRESET 0x00000008 +#define MV_U3D_LINK_CHANGE_HRESET 0x00000010 +#define MV_U3D_LINK_CHANGE_VBUS_INVALID 0x00000020 +#define MV_U3D_LINK_CHANGE_INACT 0x00000040 +#define MV_U3D_LINK_CHANGE_DISABLE_AFTER_U0 0x00000080 +#define MV_U3D_LINK_CHANGE_U1 0x00000100 +#define MV_U3D_LINK_CHANGE_U2 0x00000200 +#define MV_U3D_LINK_CHANGE_U3 0x00000400 + +/* bridge setting */ +#define MV_U3D_BRIDGE_SETTING_VBUS_VALID (1 << 16) + +/* Command Register Bit Masks */ +#define MV_U3D_CMD_RUN_STOP 0x00000001 +#define MV_U3D_CMD_CTRL_RESET 0x00000002 + +/* ep control register */ +#define MV_U3D_EPXCR_EP_TYPE_CONTROL 0 +#define MV_U3D_EPXCR_EP_TYPE_ISOC 1 +#define MV_U3D_EPXCR_EP_TYPE_BULK 2 +#define MV_U3D_EPXCR_EP_TYPE_INT 3 +#define MV_U3D_EPXCR_EP_ENABLE_SHIFT 4 +#define MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT 12 +#define MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT 16 +#define MV_U3D_USB_BULK_BURST_OUT 6 +#define MV_U3D_USB_BULK_BURST_IN 14 + +#define MV_U3D_EPXCR_EP_FLUSH (1 << 7) +#define MV_U3D_EPXCR_EP_HALT (1 << 1) +#define MV_U3D_EPXCR_EP_INIT (1) + +/* TX/RX Status Register */ +#define MV_U3D_XFERSTATUS_COMPLETE_SHIFT 24 +#define MV_U3D_COMPLETE_INVALID 0 +#define MV_U3D_COMPLETE_SUCCESS 1 +#define MV_U3D_COMPLETE_BUFF_ERR 2 +#define MV_U3D_COMPLETE_SHORT_PACKET 3 +#define MV_U3D_COMPLETE_TRB_ERR 5 +#define MV_U3D_XFERSTATUS_TRB_LENGTH_MASK (0xFFFFFF) + +#define MV_U3D_USB_LINK_BYPASS_VBUS 0x8 + +#define MV_U3D_LTSSM_PHY_INIT_DONE 0x80000000 +#define MV_U3D_LTSSM_NEVER_GO_COMPLIANCE 0x40000000 + +#define MV_U3D_USB3_OP_REGS_OFFSET 0x100 +#define MV_U3D_USB3_PHY_OFFSET 0xB800 + +#define DCS_ENABLE 0x1 + +/* timeout */ +#define MV_U3D_RESET_TIMEOUT 10000 +#define MV_U3D_FLUSH_TIMEOUT 100000 +#define MV_U3D_OWN_TIMEOUT 10000 +#define LOOPS_USEC_SHIFT 4 +#define LOOPS_USEC (1 << LOOPS_USEC_SHIFT) +#define LOOPS(timeout) ((timeout) >> LOOPS_USEC_SHIFT) + +/* ep direction */ +#define MV_U3D_EP_DIR_IN 1 +#define MV_U3D_EP_DIR_OUT 0 +#define mv_u3d_ep_dir(ep) (((ep)->ep_num == 0) ? \ + ((ep)->u3d->ep0_dir) : ((ep)->direction)) + +/* usb capability registers */ +struct mv_u3d_cap_regs { + u32 rsvd[5]; + u32 dboff; /* doorbell register offset */ + u32 rtsoff; /* runtime register offset */ + u32 vuoff; /* vendor unique register offset */ +}; + +/* operation registers */ +struct mv_u3d_op_regs { + u32 usbcmd; /* Command register */ + u32 rsvd1[11]; + u32 dcbaapl; /* Device Context Base Address low register */ + u32 dcbaaph; /* Device Context Base Address high register */ + u32 rsvd2[243]; + u32 portsc; /* port status and control register*/ + u32 portlinkinfo; /* port link info register*/ + u32 rsvd3[9917]; + u32 doorbell; /* doorbell register */ +}; + +/* control endpoint enable registers */ +struct epxcr { + u32 epxoutcr0; /* ep out control 0 register */ + u32 epxoutcr1; /* ep out control 1 register */ + u32 epxincr0; /* ep in control 0 register */ + u32 epxincr1; /* ep in control 1 register */ +}; + +/* transfer status registers */ +struct xferstatus { + u32 curdeqlo; /* current TRB pointer low */ + u32 curdeqhi; /* current TRB pointer high */ + u32 statuslo; /* transfer status low */ + u32 statushi; /* transfer status high */ +}; + +/* vendor unique control registers */ +struct mv_u3d_vuc_regs { + u32 ctrlepenable; /* control endpoint enable register */ + u32 setuplock; /* setup lock register */ + u32 endcomplete; /* endpoint transfer complete register */ + u32 intrcause; /* interrupt cause register */ + u32 intrenable; /* interrupt enable register */ + u32 trbcomplete; /* TRB complete register */ + u32 linkchange; /* link change register */ + u32 rsvd1[5]; + u32 trbunderrun; /* TRB underrun register */ + u32 rsvd2[43]; + u32 bridgesetting; /* bridge setting register */ + u32 rsvd3[7]; + struct xferstatus txst[16]; /* TX status register */ + struct xferstatus rxst[16]; /* RX status register */ + u32 ltssm; /* LTSSM control register */ + u32 pipe; /* PIPE control register */ + u32 linkcr0; /* link control 0 register */ + u32 linkcr1; /* link control 1 register */ + u32 rsvd6[60]; + u32 mib0; /* MIB0 counter register */ + u32 usblink; /* usb link control register */ + u32 ltssmstate; /* LTSSM state register */ + u32 linkerrorcause; /* link error cause register */ + u32 rsvd7[60]; + u32 devaddrtiebrkr; /* device address and tie breaker */ + u32 itpinfo0; /* ITP info 0 register */ + u32 itpinfo1; /* ITP info 1 register */ + u32 rsvd8[61]; + struct epxcr epcr[16]; /* ep control register */ + u32 rsvd9[64]; + u32 phyaddr; /* PHY address register */ + u32 phydata; /* PHY data register */ +}; + +/* Endpoint context structure */ +struct mv_u3d_ep_context { + u32 rsvd0; + u32 rsvd1; + u32 trb_addr_lo; /* TRB address low 32 bit */ + u32 trb_addr_hi; /* TRB address high 32 bit */ + u32 rsvd2; + u32 rsvd3; + struct usb_ctrlrequest setup_buffer; /* setup data buffer */ +}; + +/* TRB control data structure */ +struct mv_u3d_trb_ctrl { + u32 own:1; /* owner of TRB */ + u32 rsvd1:3; + u32 chain:1; /* associate this TRB with the + next TRB on the Ring */ + u32 ioc:1; /* interrupt on complete */ + u32 rsvd2:4; + u32 type:6; /* TRB type */ +#define TYPE_NORMAL 1 +#define TYPE_DATA 3 +#define TYPE_LINK 6 + u32 dir:1; /* Working at data stage of control endpoint + operation. 0 is OUT and 1 is IN. */ + u32 rsvd3:15; +}; + +/* TRB data structure + * For multiple TRB, all the TRBs' physical address should be continuous. + */ +struct mv_u3d_trb_hw { + u32 buf_addr_lo; /* data buffer address low 32 bit */ + u32 buf_addr_hi; /* data buffer address high 32 bit */ + u32 trb_len; /* transfer length */ + struct mv_u3d_trb_ctrl ctrl; /* TRB control data */ +}; + +/* TRB structure */ +struct mv_u3d_trb { + struct mv_u3d_trb_hw *trb_hw; /* point to the trb_hw structure */ + dma_addr_t trb_dma; /* dma address for this trb_hw */ + struct list_head trb_list; /* trb list */ +}; + +/* device data structure */ +struct mv_u3d { + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + spinlock_t lock; /* device lock */ + struct completion *done; + struct device *dev; + int irq; + + /* usb controller registers */ + struct mv_u3d_cap_regs __iomem *cap_regs; + struct mv_u3d_op_regs __iomem *op_regs; + struct mv_u3d_vuc_regs __iomem *vuc_regs; + void __iomem *phy_regs; + + unsigned int max_eps; + struct mv_u3d_ep_context *ep_context; + size_t ep_context_size; + dma_addr_t ep_context_dma; + + struct dma_pool *trb_pool; /* for TRB data structure */ + struct mv_u3d_ep *eps; + + struct mv_u3d_req *status_req; /* ep0 status request */ + struct usb_ctrlrequest local_setup_buff; /* store setup data*/ + + unsigned int resume_state; /* USB state to resume */ + unsigned int usb_state; /* USB current state */ + unsigned int ep0_state; /* Endpoint zero state */ + unsigned int ep0_dir; + + unsigned int dev_addr; /* device address */ + + unsigned int errors; + + unsigned softconnect:1; + unsigned vbus_active:1; /* vbus is active or not */ + unsigned remote_wakeup:1; /* support remote wakeup */ + unsigned clock_gating:1; /* clock gating or not */ + unsigned active:1; /* udc is active or not */ + unsigned vbus_valid_detect:1; /* udc vbus detection */ + + struct mv_usb_addon_irq *vbus; + unsigned int power; + + struct clk *clk; +}; + +/* endpoint data structure */ +struct mv_u3d_ep { + struct usb_ep ep; + struct mv_u3d *u3d; + struct list_head queue; /* ep request queued hardware */ + struct list_head req_list; /* list of ep request */ + struct mv_u3d_ep_context *ep_context; /* ep context */ + u32 direction; + char name[14]; + u32 processing; /* there is ep request + queued on haredware */ + spinlock_t req_lock; /* ep lock */ + unsigned wedge:1; + unsigned enabled:1; + unsigned ep_type:2; + unsigned ep_num:8; +}; + +/* request data structure */ +struct mv_u3d_req { + struct usb_request req; + struct mv_u3d_ep *ep; + struct list_head queue; /* ep requst queued on hardware */ + struct list_head list; /* ep request list */ + struct list_head trb_list; /* trb list of a request */ + + struct mv_u3d_trb *trb_head; /* point to first trb of a request */ + unsigned trb_count; /* TRB number in the chain */ + unsigned chain; /* TRB chain or not */ +}; + +#endif diff --git a/drivers/usb/gadget/udc/mv_u3d_core.c b/drivers/usb/gadget/udc/mv_u3d_core.c new file mode 100644 index 000000000..411b61797 --- /dev/null +++ b/drivers/usb/gadget/udc/mv_u3d_core.c @@ -0,0 +1,2064 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + */ + +#include <linux/module.h> +#include <linux/dma-mapping.h> +#include <linux/dmapool.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/notifier.h> +#include <linux/interrupt.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/pm.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/platform_data/mv_usb.h> +#include <linux/clk.h> + +#include "mv_u3d.h" + +#define DRIVER_DESC "Marvell PXA USB3.0 Device Controller driver" + +static const char driver_name[] = "mv_u3d"; + +static void mv_u3d_nuke(struct mv_u3d_ep *ep, int status); +static void mv_u3d_stop_activity(struct mv_u3d *u3d, + struct usb_gadget_driver *driver); + +/* for endpoint 0 operations */ +static const struct usb_endpoint_descriptor mv_u3d_ep0_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 0, + .bmAttributes = USB_ENDPOINT_XFER_CONTROL, + .wMaxPacketSize = MV_U3D_EP0_MAX_PKT_SIZE, +}; + +static void mv_u3d_ep0_reset(struct mv_u3d *u3d) +{ + struct mv_u3d_ep *ep; + u32 epxcr; + int i; + + for (i = 0; i < 2; i++) { + ep = &u3d->eps[i]; + ep->u3d = u3d; + + /* ep0 ep context, ep0 in and out share the same ep context */ + ep->ep_context = &u3d->ep_context[1]; + } + + /* reset ep state machine */ + /* reset ep0 out */ + epxcr = ioread32(&u3d->vuc_regs->epcr[0].epxoutcr0); + epxcr |= MV_U3D_EPXCR_EP_INIT; + iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxoutcr0); + udelay(5); + epxcr &= ~MV_U3D_EPXCR_EP_INIT; + iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxoutcr0); + + epxcr = ((MV_U3D_EP0_MAX_PKT_SIZE + << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT) + | (1 << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT) + | (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT) + | MV_U3D_EPXCR_EP_TYPE_CONTROL); + iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxoutcr1); + + /* reset ep0 in */ + epxcr = ioread32(&u3d->vuc_regs->epcr[0].epxincr0); + epxcr |= MV_U3D_EPXCR_EP_INIT; + iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxincr0); + udelay(5); + epxcr &= ~MV_U3D_EPXCR_EP_INIT; + iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxincr0); + + epxcr = ((MV_U3D_EP0_MAX_PKT_SIZE + << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT) + | (1 << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT) + | (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT) + | MV_U3D_EPXCR_EP_TYPE_CONTROL); + iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxincr1); +} + +static void mv_u3d_ep0_stall(struct mv_u3d *u3d) +{ + u32 tmp; + dev_dbg(u3d->dev, "%s\n", __func__); + + /* set TX and RX to stall */ + tmp = ioread32(&u3d->vuc_regs->epcr[0].epxoutcr0); + tmp |= MV_U3D_EPXCR_EP_HALT; + iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxoutcr0); + + tmp = ioread32(&u3d->vuc_regs->epcr[0].epxincr0); + tmp |= MV_U3D_EPXCR_EP_HALT; + iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxincr0); + + /* update ep0 state */ + u3d->ep0_state = MV_U3D_WAIT_FOR_SETUP; + u3d->ep0_dir = MV_U3D_EP_DIR_OUT; +} + +static int mv_u3d_process_ep_req(struct mv_u3d *u3d, int index, + struct mv_u3d_req *curr_req) +{ + struct mv_u3d_trb *curr_trb; + int actual, remaining_length = 0; + int direction, ep_num; + int retval = 0; + u32 tmp, status, length; + + direction = index % 2; + ep_num = index / 2; + + actual = curr_req->req.length; + + while (!list_empty(&curr_req->trb_list)) { + curr_trb = list_entry(curr_req->trb_list.next, + struct mv_u3d_trb, trb_list); + if (!curr_trb->trb_hw->ctrl.own) { + dev_err(u3d->dev, "%s, TRB own error!\n", + u3d->eps[index].name); + return 1; + } + + curr_trb->trb_hw->ctrl.own = 0; + if (direction == MV_U3D_EP_DIR_OUT) + tmp = ioread32(&u3d->vuc_regs->rxst[ep_num].statuslo); + else + tmp = ioread32(&u3d->vuc_regs->txst[ep_num].statuslo); + + status = tmp >> MV_U3D_XFERSTATUS_COMPLETE_SHIFT; + length = tmp & MV_U3D_XFERSTATUS_TRB_LENGTH_MASK; + + if (status == MV_U3D_COMPLETE_SUCCESS || + (status == MV_U3D_COMPLETE_SHORT_PACKET && + direction == MV_U3D_EP_DIR_OUT)) { + remaining_length += length; + actual -= remaining_length; + } else { + dev_err(u3d->dev, + "complete_tr error: ep=%d %s: error = 0x%x\n", + index >> 1, direction ? "SEND" : "RECV", + status); + retval = -EPROTO; + } + + list_del_init(&curr_trb->trb_list); + } + if (retval) + return retval; + + curr_req->req.actual = actual; + return 0; +} + +/* + * mv_u3d_done() - retire a request; caller blocked irqs + * @status : request status to be set, only works when + * request is still in progress. + */ +static +void mv_u3d_done(struct mv_u3d_ep *ep, struct mv_u3d_req *req, int status) + __releases(&ep->udc->lock) + __acquires(&ep->udc->lock) +{ + struct mv_u3d *u3d = (struct mv_u3d *)ep->u3d; + + dev_dbg(u3d->dev, "mv_u3d_done: remove req->queue\n"); + /* Removed the req from ep queue */ + list_del_init(&req->queue); + + /* req.status should be set as -EINPROGRESS in ep_queue() */ + if (req->req.status == -EINPROGRESS) + req->req.status = status; + else + status = req->req.status; + + /* Free trb for the request */ + if (!req->chain) + dma_pool_free(u3d->trb_pool, + req->trb_head->trb_hw, req->trb_head->trb_dma); + else { + dma_unmap_single(ep->u3d->gadget.dev.parent, + (dma_addr_t)req->trb_head->trb_dma, + req->trb_count * sizeof(struct mv_u3d_trb_hw), + DMA_BIDIRECTIONAL); + kfree(req->trb_head->trb_hw); + } + kfree(req->trb_head); + + usb_gadget_unmap_request(&u3d->gadget, &req->req, mv_u3d_ep_dir(ep)); + + if (status && (status != -ESHUTDOWN)) { + dev_dbg(u3d->dev, "complete %s req %p stat %d len %u/%u", + ep->ep.name, &req->req, status, + req->req.actual, req->req.length); + } + + spin_unlock(&ep->u3d->lock); + + usb_gadget_giveback_request(&ep->ep, &req->req); + + spin_lock(&ep->u3d->lock); +} + +static int mv_u3d_queue_trb(struct mv_u3d_ep *ep, struct mv_u3d_req *req) +{ + u32 tmp, direction; + struct mv_u3d *u3d; + struct mv_u3d_ep_context *ep_context; + int retval = 0; + + u3d = ep->u3d; + direction = mv_u3d_ep_dir(ep); + + /* ep0 in and out share the same ep context slot 1*/ + if (ep->ep_num == 0) + ep_context = &(u3d->ep_context[1]); + else + ep_context = &(u3d->ep_context[ep->ep_num * 2 + direction]); + + /* check if the pipe is empty or not */ + if (!list_empty(&ep->queue)) { + dev_err(u3d->dev, "add trb to non-empty queue!\n"); + retval = -ENOMEM; + WARN_ON(1); + } else { + ep_context->rsvd0 = cpu_to_le32(1); + ep_context->rsvd1 = 0; + + /* Configure the trb address and set the DCS bit. + * Both DCS bit and own bit in trb should be set. + */ + ep_context->trb_addr_lo = + cpu_to_le32(req->trb_head->trb_dma | DCS_ENABLE); + ep_context->trb_addr_hi = 0; + + /* Ensure that updates to the EP Context will + * occure before Ring Bell. + */ + wmb(); + + /* ring bell the ep */ + if (ep->ep_num == 0) + tmp = 0x1; + else + tmp = ep->ep_num * 2 + + ((direction == MV_U3D_EP_DIR_OUT) ? 0 : 1); + + iowrite32(tmp, &u3d->op_regs->doorbell); + } + return retval; +} + +static struct mv_u3d_trb *mv_u3d_build_trb_one(struct mv_u3d_req *req, + unsigned *length, dma_addr_t *dma) +{ + u32 temp; + unsigned int direction; + struct mv_u3d_trb *trb; + struct mv_u3d_trb_hw *trb_hw; + struct mv_u3d *u3d; + + /* how big will this transfer be? */ + *length = req->req.length - req->req.actual; + BUG_ON(*length > (unsigned)MV_U3D_EP_MAX_LENGTH_TRANSFER); + + u3d = req->ep->u3d; + + trb = kzalloc(sizeof(*trb), GFP_ATOMIC); + if (!trb) + return NULL; + + /* + * Be careful that no _GFP_HIGHMEM is set, + * or we can not use dma_to_virt + * cannot use GFP_KERNEL in spin lock + */ + trb_hw = dma_pool_alloc(u3d->trb_pool, GFP_ATOMIC, dma); + if (!trb_hw) { + kfree(trb); + dev_err(u3d->dev, + "%s, dma_pool_alloc fail\n", __func__); + return NULL; + } + trb->trb_dma = *dma; + trb->trb_hw = trb_hw; + + /* initialize buffer page pointers */ + temp = (u32)(req->req.dma + req->req.actual); + + trb_hw->buf_addr_lo = cpu_to_le32(temp); + trb_hw->buf_addr_hi = 0; + trb_hw->trb_len = cpu_to_le32(*length); + trb_hw->ctrl.own = 1; + + if (req->ep->ep_num == 0) + trb_hw->ctrl.type = TYPE_DATA; + else + trb_hw->ctrl.type = TYPE_NORMAL; + + req->req.actual += *length; + + direction = mv_u3d_ep_dir(req->ep); + if (direction == MV_U3D_EP_DIR_IN) + trb_hw->ctrl.dir = 1; + else + trb_hw->ctrl.dir = 0; + + /* Enable interrupt for the last trb of a request */ + if (!req->req.no_interrupt) + trb_hw->ctrl.ioc = 1; + + trb_hw->ctrl.chain = 0; + + wmb(); + return trb; +} + +static int mv_u3d_build_trb_chain(struct mv_u3d_req *req, unsigned *length, + struct mv_u3d_trb *trb, int *is_last) +{ + u32 temp; + unsigned int direction; + struct mv_u3d *u3d; + + /* how big will this transfer be? */ + *length = min(req->req.length - req->req.actual, + (unsigned)MV_U3D_EP_MAX_LENGTH_TRANSFER); + + u3d = req->ep->u3d; + + trb->trb_dma = 0; + + /* initialize buffer page pointers */ + temp = (u32)(req->req.dma + req->req.actual); + + trb->trb_hw->buf_addr_lo = cpu_to_le32(temp); + trb->trb_hw->buf_addr_hi = 0; + trb->trb_hw->trb_len = cpu_to_le32(*length); + trb->trb_hw->ctrl.own = 1; + + if (req->ep->ep_num == 0) + trb->trb_hw->ctrl.type = TYPE_DATA; + else + trb->trb_hw->ctrl.type = TYPE_NORMAL; + + req->req.actual += *length; + + direction = mv_u3d_ep_dir(req->ep); + if (direction == MV_U3D_EP_DIR_IN) + trb->trb_hw->ctrl.dir = 1; + else + trb->trb_hw->ctrl.dir = 0; + + /* zlp is needed if req->req.zero is set */ + if (req->req.zero) { + if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0) + *is_last = 1; + else + *is_last = 0; + } else if (req->req.length == req->req.actual) + *is_last = 1; + else + *is_last = 0; + + /* Enable interrupt for the last trb of a request */ + if (*is_last && !req->req.no_interrupt) + trb->trb_hw->ctrl.ioc = 1; + + if (*is_last) + trb->trb_hw->ctrl.chain = 0; + else { + trb->trb_hw->ctrl.chain = 1; + dev_dbg(u3d->dev, "chain trb\n"); + } + + wmb(); + + return 0; +} + +/* generate TRB linked list for a request + * usb controller only supports continous trb chain, + * that trb structure physical address should be continous. + */ +static int mv_u3d_req_to_trb(struct mv_u3d_req *req) +{ + unsigned count; + int is_last; + struct mv_u3d_trb *trb; + struct mv_u3d_trb_hw *trb_hw; + struct mv_u3d *u3d; + dma_addr_t dma; + unsigned length; + unsigned trb_num; + + u3d = req->ep->u3d; + + INIT_LIST_HEAD(&req->trb_list); + + length = req->req.length - req->req.actual; + /* normally the request transfer length is less than 16KB. + * we use buil_trb_one() to optimize it. + */ + if (length <= (unsigned)MV_U3D_EP_MAX_LENGTH_TRANSFER) { + trb = mv_u3d_build_trb_one(req, &count, &dma); + list_add_tail(&trb->trb_list, &req->trb_list); + req->trb_head = trb; + req->trb_count = 1; + req->chain = 0; + } else { + trb_num = length / MV_U3D_EP_MAX_LENGTH_TRANSFER; + if (length % MV_U3D_EP_MAX_LENGTH_TRANSFER) + trb_num++; + + trb = kcalloc(trb_num, sizeof(*trb), GFP_ATOMIC); + if (!trb) + return -ENOMEM; + + trb_hw = kcalloc(trb_num, sizeof(*trb_hw), GFP_ATOMIC); + if (!trb_hw) { + kfree(trb); + return -ENOMEM; + } + + do { + trb->trb_hw = trb_hw; + if (mv_u3d_build_trb_chain(req, &count, + trb, &is_last)) { + dev_err(u3d->dev, + "%s, mv_u3d_build_trb_chain fail\n", + __func__); + return -EIO; + } + + list_add_tail(&trb->trb_list, &req->trb_list); + req->trb_count++; + trb++; + trb_hw++; + } while (!is_last); + + req->trb_head = list_entry(req->trb_list.next, + struct mv_u3d_trb, trb_list); + req->trb_head->trb_dma = dma_map_single(u3d->gadget.dev.parent, + req->trb_head->trb_hw, + trb_num * sizeof(*trb_hw), + DMA_BIDIRECTIONAL); + if (dma_mapping_error(u3d->gadget.dev.parent, + req->trb_head->trb_dma)) { + kfree(req->trb_head->trb_hw); + kfree(req->trb_head); + return -EFAULT; + } + + req->chain = 1; + } + + return 0; +} + +static int +mv_u3d_start_queue(struct mv_u3d_ep *ep) +{ + struct mv_u3d *u3d = ep->u3d; + struct mv_u3d_req *req; + int ret; + + if (!list_empty(&ep->req_list) && !ep->processing) + req = list_entry(ep->req_list.next, struct mv_u3d_req, list); + else + return 0; + + ep->processing = 1; + + /* set up dma mapping */ + ret = usb_gadget_map_request(&u3d->gadget, &req->req, + mv_u3d_ep_dir(ep)); + if (ret) + goto break_processing; + + req->req.status = -EINPROGRESS; + req->req.actual = 0; + req->trb_count = 0; + + /* build trbs */ + ret = mv_u3d_req_to_trb(req); + if (ret) { + dev_err(u3d->dev, "%s, mv_u3d_req_to_trb fail\n", __func__); + goto break_processing; + } + + /* and push them to device queue */ + ret = mv_u3d_queue_trb(ep, req); + if (ret) + goto break_processing; + + /* irq handler advances the queue */ + list_add_tail(&req->queue, &ep->queue); + + return 0; + +break_processing: + ep->processing = 0; + return ret; +} + +static int mv_u3d_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct mv_u3d *u3d; + struct mv_u3d_ep *ep; + u16 max = 0; + unsigned maxburst = 0; + u32 epxcr, direction; + + if (!_ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) + return -EINVAL; + + ep = container_of(_ep, struct mv_u3d_ep, ep); + u3d = ep->u3d; + + if (!u3d->driver || u3d->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + direction = mv_u3d_ep_dir(ep); + max = le16_to_cpu(desc->wMaxPacketSize); + + if (!_ep->maxburst) + _ep->maxburst = 1; + maxburst = _ep->maxburst; + + /* Set the max burst size */ + switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { + case USB_ENDPOINT_XFER_BULK: + if (maxburst > 16) { + dev_dbg(u3d->dev, + "max burst should not be greater " + "than 16 on bulk ep\n"); + maxburst = 1; + _ep->maxburst = maxburst; + } + dev_dbg(u3d->dev, + "maxburst: %d on bulk %s\n", maxburst, ep->name); + break; + case USB_ENDPOINT_XFER_CONTROL: + /* control transfer only supports maxburst as one */ + maxburst = 1; + _ep->maxburst = maxburst; + break; + case USB_ENDPOINT_XFER_INT: + if (maxburst != 1) { + dev_dbg(u3d->dev, + "max burst should be 1 on int ep " + "if transfer size is not 1024\n"); + maxburst = 1; + _ep->maxburst = maxburst; + } + break; + case USB_ENDPOINT_XFER_ISOC: + if (maxburst != 1) { + dev_dbg(u3d->dev, + "max burst should be 1 on isoc ep " + "if transfer size is not 1024\n"); + maxburst = 1; + _ep->maxburst = maxburst; + } + break; + default: + goto en_done; + } + + ep->ep.maxpacket = max; + ep->ep.desc = desc; + ep->enabled = 1; + + /* Enable the endpoint for Rx or Tx and set the endpoint type */ + if (direction == MV_U3D_EP_DIR_OUT) { + epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0); + epxcr |= MV_U3D_EPXCR_EP_INIT; + iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0); + udelay(5); + epxcr &= ~MV_U3D_EPXCR_EP_INIT; + iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0); + + epxcr = ((max << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT) + | ((maxburst - 1) << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT) + | (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT) + | (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)); + iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr1); + } else { + epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0); + epxcr |= MV_U3D_EPXCR_EP_INIT; + iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0); + udelay(5); + epxcr &= ~MV_U3D_EPXCR_EP_INIT; + iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0); + + epxcr = ((max << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT) + | ((maxburst - 1) << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT) + | (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT) + | (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)); + iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr1); + } + + return 0; +en_done: + return -EINVAL; +} + +static int mv_u3d_ep_disable(struct usb_ep *_ep) +{ + struct mv_u3d *u3d; + struct mv_u3d_ep *ep; + u32 epxcr, direction; + unsigned long flags; + + if (!_ep) + return -EINVAL; + + ep = container_of(_ep, struct mv_u3d_ep, ep); + if (!ep->ep.desc) + return -EINVAL; + + u3d = ep->u3d; + + direction = mv_u3d_ep_dir(ep); + + /* nuke all pending requests (does flush) */ + spin_lock_irqsave(&u3d->lock, flags); + mv_u3d_nuke(ep, -ESHUTDOWN); + spin_unlock_irqrestore(&u3d->lock, flags); + + /* Disable the endpoint for Rx or Tx and reset the endpoint type */ + if (direction == MV_U3D_EP_DIR_OUT) { + epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr1); + epxcr &= ~((1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT) + | USB_ENDPOINT_XFERTYPE_MASK); + iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr1); + } else { + epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr1); + epxcr &= ~((1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT) + | USB_ENDPOINT_XFERTYPE_MASK); + iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr1); + } + + ep->enabled = 0; + + ep->ep.desc = NULL; + return 0; +} + +static struct usb_request * +mv_u3d_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) +{ + struct mv_u3d_req *req = NULL; + + req = kzalloc(sizeof *req, gfp_flags); + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->queue); + + return &req->req; +} + +static void mv_u3d_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct mv_u3d_req *req = container_of(_req, struct mv_u3d_req, req); + + kfree(req); +} + +static void mv_u3d_ep_fifo_flush(struct usb_ep *_ep) +{ + struct mv_u3d *u3d; + u32 direction; + struct mv_u3d_ep *ep = container_of(_ep, struct mv_u3d_ep, ep); + unsigned int loops; + u32 tmp; + + /* if endpoint is not enabled, cannot flush endpoint */ + if (!ep->enabled) + return; + + u3d = ep->u3d; + direction = mv_u3d_ep_dir(ep); + + /* ep0 need clear bit after flushing fifo. */ + if (!ep->ep_num) { + if (direction == MV_U3D_EP_DIR_OUT) { + tmp = ioread32(&u3d->vuc_regs->epcr[0].epxoutcr0); + tmp |= MV_U3D_EPXCR_EP_FLUSH; + iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxoutcr0); + udelay(10); + tmp &= ~MV_U3D_EPXCR_EP_FLUSH; + iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxoutcr0); + } else { + tmp = ioread32(&u3d->vuc_regs->epcr[0].epxincr0); + tmp |= MV_U3D_EPXCR_EP_FLUSH; + iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxincr0); + udelay(10); + tmp &= ~MV_U3D_EPXCR_EP_FLUSH; + iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxincr0); + } + return; + } + + if (direction == MV_U3D_EP_DIR_OUT) { + tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0); + tmp |= MV_U3D_EPXCR_EP_FLUSH; + iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0); + + /* Wait until flushing completed */ + loops = LOOPS(MV_U3D_FLUSH_TIMEOUT); + while (ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0) & + MV_U3D_EPXCR_EP_FLUSH) { + /* + * EP_FLUSH bit should be cleared to indicate this + * operation is complete + */ + if (loops == 0) { + dev_dbg(u3d->dev, + "EP FLUSH TIMEOUT for ep%d%s\n", ep->ep_num, + direction ? "in" : "out"); + return; + } + loops--; + udelay(LOOPS_USEC); + } + } else { /* EP_DIR_IN */ + tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0); + tmp |= MV_U3D_EPXCR_EP_FLUSH; + iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0); + + /* Wait until flushing completed */ + loops = LOOPS(MV_U3D_FLUSH_TIMEOUT); + while (ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0) & + MV_U3D_EPXCR_EP_FLUSH) { + /* + * EP_FLUSH bit should be cleared to indicate this + * operation is complete + */ + if (loops == 0) { + dev_dbg(u3d->dev, + "EP FLUSH TIMEOUT for ep%d%s\n", ep->ep_num, + direction ? "in" : "out"); + return; + } + loops--; + udelay(LOOPS_USEC); + } + } +} + +/* queues (submits) an I/O request to an endpoint */ +static int +mv_u3d_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) +{ + struct mv_u3d_ep *ep; + struct mv_u3d_req *req; + struct mv_u3d *u3d; + unsigned long flags; + int is_first_req = 0; + + if (unlikely(!_ep || !_req)) + return -EINVAL; + + ep = container_of(_ep, struct mv_u3d_ep, ep); + u3d = ep->u3d; + + req = container_of(_req, struct mv_u3d_req, req); + + if (!ep->ep_num + && u3d->ep0_state == MV_U3D_STATUS_STAGE + && !_req->length) { + dev_dbg(u3d->dev, "ep0 status stage\n"); + u3d->ep0_state = MV_U3D_WAIT_FOR_SETUP; + return 0; + } + + dev_dbg(u3d->dev, "%s: %s, req: 0x%p\n", + __func__, _ep->name, req); + + /* catch various bogus parameters */ + if (!req->req.complete || !req->req.buf + || !list_empty(&req->queue)) { + dev_err(u3d->dev, + "%s, bad params, _req: 0x%p," + "req->req.complete: 0x%p, req->req.buf: 0x%p," + "list_empty: 0x%x\n", + __func__, _req, + req->req.complete, req->req.buf, + list_empty(&req->queue)); + return -EINVAL; + } + if (unlikely(!ep->ep.desc)) { + dev_err(u3d->dev, "%s, bad ep\n", __func__); + return -EINVAL; + } + if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + if (req->req.length > ep->ep.maxpacket) + return -EMSGSIZE; + } + + if (!u3d->driver || u3d->gadget.speed == USB_SPEED_UNKNOWN) { + dev_err(u3d->dev, + "bad params of driver/speed\n"); + return -ESHUTDOWN; + } + + req->ep = ep; + + /* Software list handles usb request. */ + spin_lock_irqsave(&ep->req_lock, flags); + is_first_req = list_empty(&ep->req_list); + list_add_tail(&req->list, &ep->req_list); + spin_unlock_irqrestore(&ep->req_lock, flags); + if (!is_first_req) { + dev_dbg(u3d->dev, "list is not empty\n"); + return 0; + } + + dev_dbg(u3d->dev, "call mv_u3d_start_queue from usb_ep_queue\n"); + spin_lock_irqsave(&u3d->lock, flags); + mv_u3d_start_queue(ep); + spin_unlock_irqrestore(&u3d->lock, flags); + return 0; +} + +/* dequeues (cancels, unlinks) an I/O request from an endpoint */ +static int mv_u3d_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct mv_u3d_ep *ep; + struct mv_u3d_req *req = NULL, *iter; + struct mv_u3d *u3d; + struct mv_u3d_ep_context *ep_context; + struct mv_u3d_req *next_req; + + unsigned long flags; + int ret = 0; + + if (!_ep || !_req) + return -EINVAL; + + ep = container_of(_ep, struct mv_u3d_ep, ep); + u3d = ep->u3d; + + spin_lock_irqsave(&ep->u3d->lock, flags); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry(iter, &ep->queue, queue) { + if (&iter->req != _req) + continue; + req = iter; + break; + } + if (!req) { + ret = -EINVAL; + goto out; + } + + /* The request is in progress, or completed but not dequeued */ + if (ep->queue.next == &req->queue) { + _req->status = -ECONNRESET; + mv_u3d_ep_fifo_flush(_ep); + + /* The request isn't the last request in this ep queue */ + if (req->queue.next != &ep->queue) { + dev_dbg(u3d->dev, + "it is the last request in this ep queue\n"); + ep_context = ep->ep_context; + next_req = list_entry(req->queue.next, + struct mv_u3d_req, queue); + + /* Point first TRB of next request to the EP context. */ + iowrite32((unsigned long) next_req->trb_head, + &ep_context->trb_addr_lo); + } else { + struct mv_u3d_ep_context *ep_context; + ep_context = ep->ep_context; + ep_context->trb_addr_lo = 0; + ep_context->trb_addr_hi = 0; + } + + } else + WARN_ON(1); + + mv_u3d_done(ep, req, -ECONNRESET); + + /* remove the req from the ep req list */ + if (!list_empty(&ep->req_list)) { + struct mv_u3d_req *curr_req; + curr_req = list_entry(ep->req_list.next, + struct mv_u3d_req, list); + if (curr_req == req) { + list_del_init(&req->list); + ep->processing = 0; + } + } + +out: + spin_unlock_irqrestore(&ep->u3d->lock, flags); + return ret; +} + +static void +mv_u3d_ep_set_stall(struct mv_u3d *u3d, u8 ep_num, u8 direction, int stall) +{ + u32 tmp; + struct mv_u3d_ep *ep = u3d->eps; + + dev_dbg(u3d->dev, "%s\n", __func__); + if (direction == MV_U3D_EP_DIR_OUT) { + tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0); + if (stall) + tmp |= MV_U3D_EPXCR_EP_HALT; + else + tmp &= ~MV_U3D_EPXCR_EP_HALT; + iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0); + } else { + tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0); + if (stall) + tmp |= MV_U3D_EPXCR_EP_HALT; + else + tmp &= ~MV_U3D_EPXCR_EP_HALT; + iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0); + } +} + +static int mv_u3d_ep_set_halt_wedge(struct usb_ep *_ep, int halt, int wedge) +{ + struct mv_u3d_ep *ep; + unsigned long flags; + int status = 0; + struct mv_u3d *u3d; + + ep = container_of(_ep, struct mv_u3d_ep, ep); + u3d = ep->u3d; + if (!ep->ep.desc) { + status = -EINVAL; + goto out; + } + + if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + status = -EOPNOTSUPP; + goto out; + } + + /* + * Attempt to halt IN ep will fail if any transfer requests + * are still queue + */ + if (halt && (mv_u3d_ep_dir(ep) == MV_U3D_EP_DIR_IN) + && !list_empty(&ep->queue)) { + status = -EAGAIN; + goto out; + } + + spin_lock_irqsave(&ep->u3d->lock, flags); + mv_u3d_ep_set_stall(u3d, ep->ep_num, mv_u3d_ep_dir(ep), halt); + if (halt && wedge) + ep->wedge = 1; + else if (!halt) + ep->wedge = 0; + spin_unlock_irqrestore(&ep->u3d->lock, flags); + + if (ep->ep_num == 0) + u3d->ep0_dir = MV_U3D_EP_DIR_OUT; +out: + return status; +} + +static int mv_u3d_ep_set_halt(struct usb_ep *_ep, int halt) +{ + return mv_u3d_ep_set_halt_wedge(_ep, halt, 0); +} + +static int mv_u3d_ep_set_wedge(struct usb_ep *_ep) +{ + return mv_u3d_ep_set_halt_wedge(_ep, 1, 1); +} + +static const struct usb_ep_ops mv_u3d_ep_ops = { + .enable = mv_u3d_ep_enable, + .disable = mv_u3d_ep_disable, + + .alloc_request = mv_u3d_alloc_request, + .free_request = mv_u3d_free_request, + + .queue = mv_u3d_ep_queue, + .dequeue = mv_u3d_ep_dequeue, + + .set_wedge = mv_u3d_ep_set_wedge, + .set_halt = mv_u3d_ep_set_halt, + .fifo_flush = mv_u3d_ep_fifo_flush, +}; + +static void mv_u3d_controller_stop(struct mv_u3d *u3d) +{ + u32 tmp; + + if (!u3d->clock_gating && u3d->vbus_valid_detect) + iowrite32(MV_U3D_INTR_ENABLE_VBUS_VALID, + &u3d->vuc_regs->intrenable); + else + iowrite32(0, &u3d->vuc_regs->intrenable); + iowrite32(~0x0, &u3d->vuc_regs->endcomplete); + iowrite32(~0x0, &u3d->vuc_regs->trbunderrun); + iowrite32(~0x0, &u3d->vuc_regs->trbcomplete); + iowrite32(~0x0, &u3d->vuc_regs->linkchange); + iowrite32(0x1, &u3d->vuc_regs->setuplock); + + /* Reset the RUN bit in the command register to stop USB */ + tmp = ioread32(&u3d->op_regs->usbcmd); + tmp &= ~MV_U3D_CMD_RUN_STOP; + iowrite32(tmp, &u3d->op_regs->usbcmd); + dev_dbg(u3d->dev, "after u3d_stop, USBCMD 0x%x\n", + ioread32(&u3d->op_regs->usbcmd)); +} + +static void mv_u3d_controller_start(struct mv_u3d *u3d) +{ + u32 usbintr; + u32 temp; + + /* enable link LTSSM state machine */ + temp = ioread32(&u3d->vuc_regs->ltssm); + temp |= MV_U3D_LTSSM_PHY_INIT_DONE; + iowrite32(temp, &u3d->vuc_regs->ltssm); + + /* Enable interrupts */ + usbintr = MV_U3D_INTR_ENABLE_LINK_CHG | MV_U3D_INTR_ENABLE_TXDESC_ERR | + MV_U3D_INTR_ENABLE_RXDESC_ERR | MV_U3D_INTR_ENABLE_TX_COMPLETE | + MV_U3D_INTR_ENABLE_RX_COMPLETE | MV_U3D_INTR_ENABLE_SETUP | + (u3d->vbus_valid_detect ? MV_U3D_INTR_ENABLE_VBUS_VALID : 0); + iowrite32(usbintr, &u3d->vuc_regs->intrenable); + + /* Enable ctrl ep */ + iowrite32(0x1, &u3d->vuc_regs->ctrlepenable); + + /* Set the Run bit in the command register */ + iowrite32(MV_U3D_CMD_RUN_STOP, &u3d->op_regs->usbcmd); + dev_dbg(u3d->dev, "after u3d_start, USBCMD 0x%x\n", + ioread32(&u3d->op_regs->usbcmd)); +} + +static int mv_u3d_controller_reset(struct mv_u3d *u3d) +{ + unsigned int loops; + u32 tmp; + + /* Stop the controller */ + tmp = ioread32(&u3d->op_regs->usbcmd); + tmp &= ~MV_U3D_CMD_RUN_STOP; + iowrite32(tmp, &u3d->op_regs->usbcmd); + + /* Reset the controller to get default values */ + iowrite32(MV_U3D_CMD_CTRL_RESET, &u3d->op_regs->usbcmd); + + /* wait for reset to complete */ + loops = LOOPS(MV_U3D_RESET_TIMEOUT); + while (ioread32(&u3d->op_regs->usbcmd) & MV_U3D_CMD_CTRL_RESET) { + if (loops == 0) { + dev_err(u3d->dev, + "Wait for RESET completed TIMEOUT\n"); + return -ETIMEDOUT; + } + loops--; + udelay(LOOPS_USEC); + } + + /* Configure the Endpoint Context Address */ + iowrite32(u3d->ep_context_dma, &u3d->op_regs->dcbaapl); + iowrite32(0, &u3d->op_regs->dcbaaph); + + return 0; +} + +static int mv_u3d_enable(struct mv_u3d *u3d) +{ + struct mv_usb_platform_data *pdata = dev_get_platdata(u3d->dev); + int retval; + + if (u3d->active) + return 0; + + if (!u3d->clock_gating) { + u3d->active = 1; + return 0; + } + + dev_dbg(u3d->dev, "enable u3d\n"); + clk_enable(u3d->clk); + if (pdata->phy_init) { + retval = pdata->phy_init(u3d->phy_regs); + if (retval) { + dev_err(u3d->dev, + "init phy error %d\n", retval); + clk_disable(u3d->clk); + return retval; + } + } + u3d->active = 1; + + return 0; +} + +static void mv_u3d_disable(struct mv_u3d *u3d) +{ + struct mv_usb_platform_data *pdata = dev_get_platdata(u3d->dev); + if (u3d->clock_gating && u3d->active) { + dev_dbg(u3d->dev, "disable u3d\n"); + if (pdata->phy_deinit) + pdata->phy_deinit(u3d->phy_regs); + clk_disable(u3d->clk); + u3d->active = 0; + } +} + +static int mv_u3d_vbus_session(struct usb_gadget *gadget, int is_active) +{ + struct mv_u3d *u3d; + unsigned long flags; + int retval = 0; + + u3d = container_of(gadget, struct mv_u3d, gadget); + + spin_lock_irqsave(&u3d->lock, flags); + + u3d->vbus_active = (is_active != 0); + dev_dbg(u3d->dev, "%s: softconnect %d, vbus_active %d\n", + __func__, u3d->softconnect, u3d->vbus_active); + /* + * 1. external VBUS detect: we can disable/enable clock on demand. + * 2. UDC VBUS detect: we have to enable clock all the time. + * 3. No VBUS detect: we have to enable clock all the time. + */ + if (u3d->driver && u3d->softconnect && u3d->vbus_active) { + retval = mv_u3d_enable(u3d); + if (retval == 0) { + /* + * after clock is disabled, we lost all the register + * context. We have to re-init registers + */ + mv_u3d_controller_reset(u3d); + mv_u3d_ep0_reset(u3d); + mv_u3d_controller_start(u3d); + } + } else if (u3d->driver && u3d->softconnect) { + if (!u3d->active) + goto out; + + /* stop all the transfer in queue*/ + mv_u3d_stop_activity(u3d, u3d->driver); + mv_u3d_controller_stop(u3d); + mv_u3d_disable(u3d); + } + +out: + spin_unlock_irqrestore(&u3d->lock, flags); + return retval; +} + +/* constrain controller's VBUS power usage + * This call is used by gadget drivers during SET_CONFIGURATION calls, + * reporting how much power the device may consume. For example, this + * could affect how quickly batteries are recharged. + * + * Returns zero on success, else negative errno. + */ +static int mv_u3d_vbus_draw(struct usb_gadget *gadget, unsigned mA) +{ + struct mv_u3d *u3d = container_of(gadget, struct mv_u3d, gadget); + + u3d->power = mA; + + return 0; +} + +static int mv_u3d_pullup(struct usb_gadget *gadget, int is_on) +{ + struct mv_u3d *u3d = container_of(gadget, struct mv_u3d, gadget); + unsigned long flags; + int retval = 0; + + spin_lock_irqsave(&u3d->lock, flags); + + dev_dbg(u3d->dev, "%s: softconnect %d, vbus_active %d\n", + __func__, u3d->softconnect, u3d->vbus_active); + u3d->softconnect = (is_on != 0); + if (u3d->driver && u3d->softconnect && u3d->vbus_active) { + retval = mv_u3d_enable(u3d); + if (retval == 0) { + /* + * after clock is disabled, we lost all the register + * context. We have to re-init registers + */ + mv_u3d_controller_reset(u3d); + mv_u3d_ep0_reset(u3d); + mv_u3d_controller_start(u3d); + } + } else if (u3d->driver && u3d->vbus_active) { + /* stop all the transfer in queue*/ + mv_u3d_stop_activity(u3d, u3d->driver); + mv_u3d_controller_stop(u3d); + mv_u3d_disable(u3d); + } + + spin_unlock_irqrestore(&u3d->lock, flags); + + return retval; +} + +static int mv_u3d_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) +{ + struct mv_u3d *u3d = container_of(g, struct mv_u3d, gadget); + struct mv_usb_platform_data *pdata = dev_get_platdata(u3d->dev); + unsigned long flags; + + if (u3d->driver) + return -EBUSY; + + spin_lock_irqsave(&u3d->lock, flags); + + if (!u3d->clock_gating) { + clk_enable(u3d->clk); + if (pdata->phy_init) + pdata->phy_init(u3d->phy_regs); + } + + /* hook up the driver ... */ + u3d->driver = driver; + + u3d->ep0_dir = USB_DIR_OUT; + + spin_unlock_irqrestore(&u3d->lock, flags); + + u3d->vbus_valid_detect = 1; + + return 0; +} + +static int mv_u3d_stop(struct usb_gadget *g) +{ + struct mv_u3d *u3d = container_of(g, struct mv_u3d, gadget); + struct mv_usb_platform_data *pdata = dev_get_platdata(u3d->dev); + unsigned long flags; + + u3d->vbus_valid_detect = 0; + spin_lock_irqsave(&u3d->lock, flags); + + /* enable clock to access controller register */ + clk_enable(u3d->clk); + if (pdata->phy_init) + pdata->phy_init(u3d->phy_regs); + + mv_u3d_controller_stop(u3d); + /* stop all usb activities */ + u3d->gadget.speed = USB_SPEED_UNKNOWN; + mv_u3d_stop_activity(u3d, NULL); + mv_u3d_disable(u3d); + + if (pdata->phy_deinit) + pdata->phy_deinit(u3d->phy_regs); + clk_disable(u3d->clk); + + spin_unlock_irqrestore(&u3d->lock, flags); + + u3d->driver = NULL; + + return 0; +} + +/* device controller usb_gadget_ops structure */ +static const struct usb_gadget_ops mv_u3d_ops = { + /* notify controller that VBUS is powered or not */ + .vbus_session = mv_u3d_vbus_session, + + /* constrain controller's VBUS power usage */ + .vbus_draw = mv_u3d_vbus_draw, + + .pullup = mv_u3d_pullup, + .udc_start = mv_u3d_start, + .udc_stop = mv_u3d_stop, +}; + +static int mv_u3d_eps_init(struct mv_u3d *u3d) +{ + struct mv_u3d_ep *ep; + char name[14]; + int i; + + /* initialize ep0, ep0 in/out use eps[1] */ + ep = &u3d->eps[1]; + ep->u3d = u3d; + strncpy(ep->name, "ep0", sizeof(ep->name)); + ep->ep.name = ep->name; + ep->ep.ops = &mv_u3d_ep_ops; + ep->wedge = 0; + usb_ep_set_maxpacket_limit(&ep->ep, MV_U3D_EP0_MAX_PKT_SIZE); + ep->ep.caps.type_control = true; + ep->ep.caps.dir_in = true; + ep->ep.caps.dir_out = true; + ep->ep_num = 0; + ep->ep.desc = &mv_u3d_ep0_desc; + INIT_LIST_HEAD(&ep->queue); + INIT_LIST_HEAD(&ep->req_list); + ep->ep_type = USB_ENDPOINT_XFER_CONTROL; + + /* add ep0 ep_context */ + ep->ep_context = &u3d->ep_context[1]; + + /* initialize other endpoints */ + for (i = 2; i < u3d->max_eps * 2; i++) { + ep = &u3d->eps[i]; + if (i & 1) { + snprintf(name, sizeof(name), "ep%din", i >> 1); + ep->direction = MV_U3D_EP_DIR_IN; + ep->ep.caps.dir_in = true; + } else { + snprintf(name, sizeof(name), "ep%dout", i >> 1); + ep->direction = MV_U3D_EP_DIR_OUT; + ep->ep.caps.dir_out = true; + } + ep->u3d = u3d; + strncpy(ep->name, name, sizeof(ep->name)); + ep->ep.name = ep->name; + + ep->ep.caps.type_iso = true; + ep->ep.caps.type_bulk = true; + ep->ep.caps.type_int = true; + + ep->ep.ops = &mv_u3d_ep_ops; + usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0); + ep->ep_num = i / 2; + + INIT_LIST_HEAD(&ep->queue); + list_add_tail(&ep->ep.ep_list, &u3d->gadget.ep_list); + + INIT_LIST_HEAD(&ep->req_list); + spin_lock_init(&ep->req_lock); + ep->ep_context = &u3d->ep_context[i]; + } + + return 0; +} + +/* delete all endpoint requests, called with spinlock held */ +static void mv_u3d_nuke(struct mv_u3d_ep *ep, int status) +{ + /* endpoint fifo flush */ + mv_u3d_ep_fifo_flush(&ep->ep); + + while (!list_empty(&ep->queue)) { + struct mv_u3d_req *req = NULL; + req = list_entry(ep->queue.next, struct mv_u3d_req, queue); + mv_u3d_done(ep, req, status); + } +} + +/* stop all USB activities */ +static +void mv_u3d_stop_activity(struct mv_u3d *u3d, struct usb_gadget_driver *driver) +{ + struct mv_u3d_ep *ep; + + mv_u3d_nuke(&u3d->eps[1], -ESHUTDOWN); + + list_for_each_entry(ep, &u3d->gadget.ep_list, ep.ep_list) { + mv_u3d_nuke(ep, -ESHUTDOWN); + } + + /* report disconnect; the driver is already quiesced */ + if (driver) { + spin_unlock(&u3d->lock); + driver->disconnect(&u3d->gadget); + spin_lock(&u3d->lock); + } +} + +static void mv_u3d_irq_process_error(struct mv_u3d *u3d) +{ + /* Increment the error count */ + u3d->errors++; + dev_err(u3d->dev, "%s\n", __func__); +} + +static void mv_u3d_irq_process_link_change(struct mv_u3d *u3d) +{ + u32 linkchange; + + linkchange = ioread32(&u3d->vuc_regs->linkchange); + iowrite32(linkchange, &u3d->vuc_regs->linkchange); + + dev_dbg(u3d->dev, "linkchange: 0x%x\n", linkchange); + + if (linkchange & MV_U3D_LINK_CHANGE_LINK_UP) { + dev_dbg(u3d->dev, "link up: ltssm state: 0x%x\n", + ioread32(&u3d->vuc_regs->ltssmstate)); + + u3d->usb_state = USB_STATE_DEFAULT; + u3d->ep0_dir = MV_U3D_EP_DIR_OUT; + u3d->ep0_state = MV_U3D_WAIT_FOR_SETUP; + + /* set speed */ + u3d->gadget.speed = USB_SPEED_SUPER; + } + + if (linkchange & MV_U3D_LINK_CHANGE_SUSPEND) { + dev_dbg(u3d->dev, "link suspend\n"); + u3d->resume_state = u3d->usb_state; + u3d->usb_state = USB_STATE_SUSPENDED; + } + + if (linkchange & MV_U3D_LINK_CHANGE_RESUME) { + dev_dbg(u3d->dev, "link resume\n"); + u3d->usb_state = u3d->resume_state; + u3d->resume_state = 0; + } + + if (linkchange & MV_U3D_LINK_CHANGE_WRESET) { + dev_dbg(u3d->dev, "warm reset\n"); + u3d->usb_state = USB_STATE_POWERED; + } + + if (linkchange & MV_U3D_LINK_CHANGE_HRESET) { + dev_dbg(u3d->dev, "hot reset\n"); + u3d->usb_state = USB_STATE_DEFAULT; + } + + if (linkchange & MV_U3D_LINK_CHANGE_INACT) + dev_dbg(u3d->dev, "inactive\n"); + + if (linkchange & MV_U3D_LINK_CHANGE_DISABLE_AFTER_U0) + dev_dbg(u3d->dev, "ss.disabled\n"); + + if (linkchange & MV_U3D_LINK_CHANGE_VBUS_INVALID) { + dev_dbg(u3d->dev, "vbus invalid\n"); + u3d->usb_state = USB_STATE_ATTACHED; + u3d->vbus_valid_detect = 1; + /* if external vbus detect is not supported, + * we handle it here. + */ + if (!u3d->vbus) { + spin_unlock(&u3d->lock); + mv_u3d_vbus_session(&u3d->gadget, 0); + spin_lock(&u3d->lock); + } + } +} + +static void mv_u3d_ch9setaddress(struct mv_u3d *u3d, + struct usb_ctrlrequest *setup) +{ + u32 tmp; + + if (u3d->usb_state != USB_STATE_DEFAULT) { + dev_err(u3d->dev, + "%s, cannot setaddr in this state (%d)\n", + __func__, u3d->usb_state); + goto err; + } + + u3d->dev_addr = (u8)setup->wValue; + + dev_dbg(u3d->dev, "%s: 0x%x\n", __func__, u3d->dev_addr); + + if (u3d->dev_addr > 127) { + dev_err(u3d->dev, + "%s, u3d address is wrong (out of range)\n", __func__); + u3d->dev_addr = 0; + goto err; + } + + /* update usb state */ + u3d->usb_state = USB_STATE_ADDRESS; + + /* set the new address */ + tmp = ioread32(&u3d->vuc_regs->devaddrtiebrkr); + tmp &= ~0x7F; + tmp |= (u32)u3d->dev_addr; + iowrite32(tmp, &u3d->vuc_regs->devaddrtiebrkr); + + return; +err: + mv_u3d_ep0_stall(u3d); +} + +static int mv_u3d_is_set_configuration(struct usb_ctrlrequest *setup) +{ + if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) + if (setup->bRequest == USB_REQ_SET_CONFIGURATION) + return 1; + + return 0; +} + +static void mv_u3d_handle_setup_packet(struct mv_u3d *u3d, u8 ep_num, + struct usb_ctrlrequest *setup) + __releases(&u3c->lock) + __acquires(&u3c->lock) +{ + bool delegate = false; + + mv_u3d_nuke(&u3d->eps[ep_num * 2 + MV_U3D_EP_DIR_IN], -ESHUTDOWN); + + dev_dbg(u3d->dev, "SETUP %02x.%02x v%04x i%04x l%04x\n", + setup->bRequestType, setup->bRequest, + setup->wValue, setup->wIndex, setup->wLength); + + /* We process some stardard setup requests here */ + if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { + switch (setup->bRequest) { + case USB_REQ_GET_STATUS: + delegate = true; + break; + + case USB_REQ_SET_ADDRESS: + mv_u3d_ch9setaddress(u3d, setup); + break; + + case USB_REQ_CLEAR_FEATURE: + delegate = true; + break; + + case USB_REQ_SET_FEATURE: + delegate = true; + break; + + default: + delegate = true; + } + } else + delegate = true; + + /* delegate USB standard requests to the gadget driver */ + if (delegate) { + /* USB requests handled by gadget */ + if (setup->wLength) { + /* DATA phase from gadget, STATUS phase from u3d */ + u3d->ep0_dir = (setup->bRequestType & USB_DIR_IN) + ? MV_U3D_EP_DIR_IN : MV_U3D_EP_DIR_OUT; + spin_unlock(&u3d->lock); + if (u3d->driver->setup(&u3d->gadget, + &u3d->local_setup_buff) < 0) { + dev_err(u3d->dev, "setup error!\n"); + mv_u3d_ep0_stall(u3d); + } + spin_lock(&u3d->lock); + } else { + /* no DATA phase, STATUS phase from gadget */ + u3d->ep0_dir = MV_U3D_EP_DIR_IN; + u3d->ep0_state = MV_U3D_STATUS_STAGE; + spin_unlock(&u3d->lock); + if (u3d->driver->setup(&u3d->gadget, + &u3d->local_setup_buff) < 0) + mv_u3d_ep0_stall(u3d); + spin_lock(&u3d->lock); + } + + if (mv_u3d_is_set_configuration(setup)) { + dev_dbg(u3d->dev, "u3d configured\n"); + u3d->usb_state = USB_STATE_CONFIGURED; + } + } +} + +static void mv_u3d_get_setup_data(struct mv_u3d *u3d, u8 ep_num, u8 *buffer_ptr) +{ + struct mv_u3d_ep_context *epcontext; + + epcontext = &u3d->ep_context[ep_num * 2 + MV_U3D_EP_DIR_IN]; + + /* Copy the setup packet to local buffer */ + memcpy(buffer_ptr, (u8 *) &epcontext->setup_buffer, 8); +} + +static void mv_u3d_irq_process_setup(struct mv_u3d *u3d) +{ + u32 tmp, i; + /* Process all Setup packet received interrupts */ + tmp = ioread32(&u3d->vuc_regs->setuplock); + if (tmp) { + for (i = 0; i < u3d->max_eps; i++) { + if (tmp & (1 << i)) { + mv_u3d_get_setup_data(u3d, i, + (u8 *)(&u3d->local_setup_buff)); + mv_u3d_handle_setup_packet(u3d, i, + &u3d->local_setup_buff); + } + } + } + + iowrite32(tmp, &u3d->vuc_regs->setuplock); +} + +static void mv_u3d_irq_process_tr_complete(struct mv_u3d *u3d) +{ + u32 tmp, bit_pos; + int i, ep_num = 0, direction = 0; + struct mv_u3d_ep *curr_ep; + struct mv_u3d_req *curr_req, *temp_req; + int status; + + tmp = ioread32(&u3d->vuc_regs->endcomplete); + + dev_dbg(u3d->dev, "tr_complete: ep: 0x%x\n", tmp); + if (!tmp) + return; + iowrite32(tmp, &u3d->vuc_regs->endcomplete); + + for (i = 0; i < u3d->max_eps * 2; i++) { + ep_num = i >> 1; + direction = i % 2; + + bit_pos = 1 << (ep_num + 16 * direction); + + if (!(bit_pos & tmp)) + continue; + + if (i == 0) + curr_ep = &u3d->eps[1]; + else + curr_ep = &u3d->eps[i]; + + /* remove req out of ep request list after completion */ + dev_dbg(u3d->dev, "tr comp: check req_list\n"); + spin_lock(&curr_ep->req_lock); + if (!list_empty(&curr_ep->req_list)) { + struct mv_u3d_req *req; + req = list_entry(curr_ep->req_list.next, + struct mv_u3d_req, list); + list_del_init(&req->list); + curr_ep->processing = 0; + } + spin_unlock(&curr_ep->req_lock); + + /* process the req queue until an uncomplete request */ + list_for_each_entry_safe(curr_req, temp_req, + &curr_ep->queue, queue) { + status = mv_u3d_process_ep_req(u3d, i, curr_req); + if (status) + break; + /* write back status to req */ + curr_req->req.status = status; + + /* ep0 request completion */ + if (ep_num == 0) { + mv_u3d_done(curr_ep, curr_req, 0); + break; + } else { + mv_u3d_done(curr_ep, curr_req, status); + } + } + + dev_dbg(u3d->dev, "call mv_u3d_start_queue from ep complete\n"); + mv_u3d_start_queue(curr_ep); + } +} + +static irqreturn_t mv_u3d_irq(int irq, void *dev) +{ + struct mv_u3d *u3d = (struct mv_u3d *)dev; + u32 status, intr; + u32 bridgesetting; + u32 trbunderrun; + + spin_lock(&u3d->lock); + + status = ioread32(&u3d->vuc_regs->intrcause); + intr = ioread32(&u3d->vuc_regs->intrenable); + status &= intr; + + if (status == 0) { + spin_unlock(&u3d->lock); + dev_err(u3d->dev, "irq error!\n"); + return IRQ_NONE; + } + + if (status & MV_U3D_USBINT_VBUS_VALID) { + bridgesetting = ioread32(&u3d->vuc_regs->bridgesetting); + if (bridgesetting & MV_U3D_BRIDGE_SETTING_VBUS_VALID) { + /* write vbus valid bit of bridge setting to clear */ + bridgesetting = MV_U3D_BRIDGE_SETTING_VBUS_VALID; + iowrite32(bridgesetting, &u3d->vuc_regs->bridgesetting); + dev_dbg(u3d->dev, "vbus valid\n"); + + u3d->usb_state = USB_STATE_POWERED; + u3d->vbus_valid_detect = 0; + /* if external vbus detect is not supported, + * we handle it here. + */ + if (!u3d->vbus) { + spin_unlock(&u3d->lock); + mv_u3d_vbus_session(&u3d->gadget, 1); + spin_lock(&u3d->lock); + } + } else + dev_err(u3d->dev, "vbus bit is not set\n"); + } + + /* RX data is already in the 16KB FIFO.*/ + if (status & MV_U3D_USBINT_UNDER_RUN) { + trbunderrun = ioread32(&u3d->vuc_regs->trbunderrun); + dev_err(u3d->dev, "under run, ep%d\n", trbunderrun); + iowrite32(trbunderrun, &u3d->vuc_regs->trbunderrun); + mv_u3d_irq_process_error(u3d); + } + + if (status & (MV_U3D_USBINT_RXDESC_ERR | MV_U3D_USBINT_TXDESC_ERR)) { + /* write one to clear */ + iowrite32(status & (MV_U3D_USBINT_RXDESC_ERR + | MV_U3D_USBINT_TXDESC_ERR), + &u3d->vuc_regs->intrcause); + dev_err(u3d->dev, "desc err 0x%x\n", status); + mv_u3d_irq_process_error(u3d); + } + + if (status & MV_U3D_USBINT_LINK_CHG) + mv_u3d_irq_process_link_change(u3d); + + if (status & MV_U3D_USBINT_TX_COMPLETE) + mv_u3d_irq_process_tr_complete(u3d); + + if (status & MV_U3D_USBINT_RX_COMPLETE) + mv_u3d_irq_process_tr_complete(u3d); + + if (status & MV_U3D_USBINT_SETUP) + mv_u3d_irq_process_setup(u3d); + + spin_unlock(&u3d->lock); + return IRQ_HANDLED; +} + +static int mv_u3d_remove(struct platform_device *dev) +{ + struct mv_u3d *u3d = platform_get_drvdata(dev); + + BUG_ON(u3d == NULL); + + usb_del_gadget_udc(&u3d->gadget); + + /* free memory allocated in probe */ + dma_pool_destroy(u3d->trb_pool); + + if (u3d->ep_context) + dma_free_coherent(&dev->dev, u3d->ep_context_size, + u3d->ep_context, u3d->ep_context_dma); + + kfree(u3d->eps); + + if (u3d->irq) + free_irq(u3d->irq, u3d); + + if (u3d->cap_regs) + iounmap(u3d->cap_regs); + u3d->cap_regs = NULL; + + kfree(u3d->status_req); + + clk_put(u3d->clk); + + kfree(u3d); + + return 0; +} + +static int mv_u3d_probe(struct platform_device *dev) +{ + struct mv_u3d *u3d = NULL; + struct mv_usb_platform_data *pdata = dev_get_platdata(&dev->dev); + int retval = 0; + struct resource *r; + size_t size; + + if (!dev_get_platdata(&dev->dev)) { + dev_err(&dev->dev, "missing platform_data\n"); + retval = -ENODEV; + goto err_pdata; + } + + u3d = kzalloc(sizeof(*u3d), GFP_KERNEL); + if (!u3d) { + retval = -ENOMEM; + goto err_alloc_private; + } + + spin_lock_init(&u3d->lock); + + platform_set_drvdata(dev, u3d); + + u3d->dev = &dev->dev; + u3d->vbus = pdata->vbus; + + u3d->clk = clk_get(&dev->dev, NULL); + if (IS_ERR(u3d->clk)) { + retval = PTR_ERR(u3d->clk); + goto err_get_clk; + } + + r = platform_get_resource_byname(dev, IORESOURCE_MEM, "capregs"); + if (!r) { + dev_err(&dev->dev, "no I/O memory resource defined\n"); + retval = -ENODEV; + goto err_get_cap_regs; + } + + u3d->cap_regs = (struct mv_u3d_cap_regs __iomem *) + ioremap(r->start, resource_size(r)); + if (!u3d->cap_regs) { + dev_err(&dev->dev, "failed to map I/O memory\n"); + retval = -EBUSY; + goto err_map_cap_regs; + } else { + dev_dbg(&dev->dev, "cap_regs address: 0x%lx/0x%lx\n", + (unsigned long) r->start, + (unsigned long) u3d->cap_regs); + } + + /* we will access controller register, so enable the u3d controller */ + retval = clk_enable(u3d->clk); + if (retval) { + dev_err(&dev->dev, "clk_enable error %d\n", retval); + goto err_u3d_enable; + } + + if (pdata->phy_init) { + retval = pdata->phy_init(u3d->phy_regs); + if (retval) { + dev_err(&dev->dev, "init phy error %d\n", retval); + clk_disable(u3d->clk); + goto err_phy_init; + } + } + + u3d->op_regs = (struct mv_u3d_op_regs __iomem *)(u3d->cap_regs + + MV_U3D_USB3_OP_REGS_OFFSET); + + u3d->vuc_regs = (struct mv_u3d_vuc_regs __iomem *)(u3d->cap_regs + + ioread32(&u3d->cap_regs->vuoff)); + + u3d->max_eps = 16; + + /* + * some platform will use usb to download image, it may not disconnect + * usb gadget before loading kernel. So first stop u3d here. + */ + mv_u3d_controller_stop(u3d); + iowrite32(0xFFFFFFFF, &u3d->vuc_regs->intrcause); + + if (pdata->phy_deinit) + pdata->phy_deinit(u3d->phy_regs); + clk_disable(u3d->clk); + + size = u3d->max_eps * sizeof(struct mv_u3d_ep_context) * 2; + size = (size + MV_U3D_EP_CONTEXT_ALIGNMENT - 1) + & ~(MV_U3D_EP_CONTEXT_ALIGNMENT - 1); + u3d->ep_context = dma_alloc_coherent(&dev->dev, size, + &u3d->ep_context_dma, GFP_KERNEL); + if (!u3d->ep_context) { + dev_err(&dev->dev, "allocate ep context memory failed\n"); + retval = -ENOMEM; + goto err_alloc_ep_context; + } + u3d->ep_context_size = size; + + /* create TRB dma_pool resource */ + u3d->trb_pool = dma_pool_create("u3d_trb", + &dev->dev, + sizeof(struct mv_u3d_trb_hw), + MV_U3D_TRB_ALIGNMENT, + MV_U3D_DMA_BOUNDARY); + + if (!u3d->trb_pool) { + retval = -ENOMEM; + goto err_alloc_trb_pool; + } + + size = u3d->max_eps * sizeof(struct mv_u3d_ep) * 2; + u3d->eps = kzalloc(size, GFP_KERNEL); + if (!u3d->eps) { + retval = -ENOMEM; + goto err_alloc_eps; + } + + /* initialize ep0 status request structure */ + u3d->status_req = kzalloc(sizeof(struct mv_u3d_req) + 8, GFP_KERNEL); + if (!u3d->status_req) { + retval = -ENOMEM; + goto err_alloc_status_req; + } + INIT_LIST_HEAD(&u3d->status_req->queue); + + /* allocate a small amount of memory to get valid address */ + u3d->status_req->req.buf = (char *)u3d->status_req + + sizeof(struct mv_u3d_req); + u3d->status_req->req.dma = virt_to_phys(u3d->status_req->req.buf); + + u3d->resume_state = USB_STATE_NOTATTACHED; + u3d->usb_state = USB_STATE_ATTACHED; + u3d->ep0_dir = MV_U3D_EP_DIR_OUT; + u3d->remote_wakeup = 0; + + r = platform_get_resource(dev, IORESOURCE_IRQ, 0); + if (!r) { + dev_err(&dev->dev, "no IRQ resource defined\n"); + retval = -ENODEV; + goto err_get_irq; + } + u3d->irq = r->start; + + /* initialize gadget structure */ + u3d->gadget.ops = &mv_u3d_ops; /* usb_gadget_ops */ + u3d->gadget.ep0 = &u3d->eps[1].ep; /* gadget ep0 */ + INIT_LIST_HEAD(&u3d->gadget.ep_list); /* ep_list */ + u3d->gadget.speed = USB_SPEED_UNKNOWN; /* speed */ + + /* the "gadget" abstracts/virtualizes the controller */ + u3d->gadget.name = driver_name; /* gadget name */ + + mv_u3d_eps_init(u3d); + + if (request_irq(u3d->irq, mv_u3d_irq, + IRQF_SHARED, driver_name, u3d)) { + u3d->irq = 0; + dev_err(&dev->dev, "Request irq %d for u3d failed\n", + u3d->irq); + retval = -ENODEV; + goto err_request_irq; + } + + /* external vbus detection */ + if (u3d->vbus) { + u3d->clock_gating = 1; + dev_err(&dev->dev, "external vbus detection\n"); + } + + if (!u3d->clock_gating) + u3d->vbus_active = 1; + + /* enable usb3 controller vbus detection */ + u3d->vbus_valid_detect = 1; + + retval = usb_add_gadget_udc(&dev->dev, &u3d->gadget); + if (retval) + goto err_unregister; + + dev_dbg(&dev->dev, "successful probe usb3 device %s clock gating.\n", + u3d->clock_gating ? "with" : "without"); + + return 0; + +err_unregister: + free_irq(u3d->irq, u3d); +err_get_irq: +err_request_irq: + kfree(u3d->status_req); +err_alloc_status_req: + kfree(u3d->eps); +err_alloc_eps: + dma_pool_destroy(u3d->trb_pool); +err_alloc_trb_pool: + dma_free_coherent(&dev->dev, u3d->ep_context_size, + u3d->ep_context, u3d->ep_context_dma); +err_alloc_ep_context: +err_phy_init: +err_u3d_enable: + iounmap(u3d->cap_regs); +err_map_cap_regs: +err_get_cap_regs: + clk_put(u3d->clk); +err_get_clk: + kfree(u3d); +err_alloc_private: +err_pdata: + return retval; +} + +#ifdef CONFIG_PM_SLEEP +static int mv_u3d_suspend(struct device *dev) +{ + struct mv_u3d *u3d = dev_get_drvdata(dev); + + /* + * only cable is unplugged, usb can suspend. + * So do not care about clock_gating == 1, it is handled by + * vbus session. + */ + if (!u3d->clock_gating) { + mv_u3d_controller_stop(u3d); + + spin_lock_irq(&u3d->lock); + /* stop all usb activities */ + mv_u3d_stop_activity(u3d, u3d->driver); + spin_unlock_irq(&u3d->lock); + + mv_u3d_disable(u3d); + } + + return 0; +} + +static int mv_u3d_resume(struct device *dev) +{ + struct mv_u3d *u3d = dev_get_drvdata(dev); + int retval; + + if (!u3d->clock_gating) { + retval = mv_u3d_enable(u3d); + if (retval) + return retval; + + if (u3d->driver && u3d->softconnect) { + mv_u3d_controller_reset(u3d); + mv_u3d_ep0_reset(u3d); + mv_u3d_controller_start(u3d); + } + } + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(mv_u3d_pm_ops, mv_u3d_suspend, mv_u3d_resume); + +static void mv_u3d_shutdown(struct platform_device *dev) +{ + struct mv_u3d *u3d = platform_get_drvdata(dev); + u32 tmp; + + tmp = ioread32(&u3d->op_regs->usbcmd); + tmp &= ~MV_U3D_CMD_RUN_STOP; + iowrite32(tmp, &u3d->op_regs->usbcmd); +} + +static struct platform_driver mv_u3d_driver = { + .probe = mv_u3d_probe, + .remove = mv_u3d_remove, + .shutdown = mv_u3d_shutdown, + .driver = { + .name = "mv-u3d", + .pm = &mv_u3d_pm_ops, + }, +}; + +module_platform_driver(mv_u3d_driver); +MODULE_ALIAS("platform:mv-u3d"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Yu Xu <yuxu@marvell.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/udc/mv_udc.h b/drivers/usb/gadget/udc/mv_udc.h new file mode 100644 index 000000000..b3f759c09 --- /dev/null +++ b/drivers/usb/gadget/udc/mv_udc.h @@ -0,0 +1,309 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + */ + +#ifndef __MV_UDC_H +#define __MV_UDC_H + +#define VUSBHS_MAX_PORTS 8 + +#define DQH_ALIGNMENT 2048 +#define DTD_ALIGNMENT 64 +#define DMA_BOUNDARY 4096 + +#define EP_DIR_IN 1 +#define EP_DIR_OUT 0 + +#define DMA_ADDR_INVALID (~(dma_addr_t)0) + +#define EP0_MAX_PKT_SIZE 64 +/* ep0 transfer state */ +#define WAIT_FOR_SETUP 0 +#define DATA_STATE_XMIT 1 +#define DATA_STATE_NEED_ZLP 2 +#define WAIT_FOR_OUT_STATUS 3 +#define DATA_STATE_RECV 4 + +#define CAPLENGTH_MASK (0xff) +#define DCCPARAMS_DEN_MASK (0x1f) + +#define HCSPARAMS_PPC (0x10) + +/* Frame Index Register Bit Masks */ +#define USB_FRINDEX_MASKS 0x3fff + +/* Command Register Bit Masks */ +#define USBCMD_RUN_STOP (0x00000001) +#define USBCMD_CTRL_RESET (0x00000002) +#define USBCMD_SETUP_TRIPWIRE_SET (0x00002000) +#define USBCMD_SETUP_TRIPWIRE_CLEAR (~USBCMD_SETUP_TRIPWIRE_SET) + +#define USBCMD_ATDTW_TRIPWIRE_SET (0x00004000) +#define USBCMD_ATDTW_TRIPWIRE_CLEAR (~USBCMD_ATDTW_TRIPWIRE_SET) + +/* bit 15,3,2 are for frame list size */ +#define USBCMD_FRAME_SIZE_1024 (0x00000000) /* 000 */ +#define USBCMD_FRAME_SIZE_512 (0x00000004) /* 001 */ +#define USBCMD_FRAME_SIZE_256 (0x00000008) /* 010 */ +#define USBCMD_FRAME_SIZE_128 (0x0000000C) /* 011 */ +#define USBCMD_FRAME_SIZE_64 (0x00008000) /* 100 */ +#define USBCMD_FRAME_SIZE_32 (0x00008004) /* 101 */ +#define USBCMD_FRAME_SIZE_16 (0x00008008) /* 110 */ +#define USBCMD_FRAME_SIZE_8 (0x0000800C) /* 111 */ + +#define EPCTRL_TX_ALL_MASK (0xFFFF0000) +#define EPCTRL_RX_ALL_MASK (0x0000FFFF) + +#define EPCTRL_TX_DATA_TOGGLE_RST (0x00400000) +#define EPCTRL_TX_EP_STALL (0x00010000) +#define EPCTRL_RX_EP_STALL (0x00000001) +#define EPCTRL_RX_DATA_TOGGLE_RST (0x00000040) +#define EPCTRL_RX_ENABLE (0x00000080) +#define EPCTRL_TX_ENABLE (0x00800000) +#define EPCTRL_CONTROL (0x00000000) +#define EPCTRL_ISOCHRONOUS (0x00040000) +#define EPCTRL_BULK (0x00080000) +#define EPCTRL_INT (0x000C0000) +#define EPCTRL_TX_TYPE (0x000C0000) +#define EPCTRL_RX_TYPE (0x0000000C) +#define EPCTRL_DATA_TOGGLE_INHIBIT (0x00000020) +#define EPCTRL_TX_EP_TYPE_SHIFT (18) +#define EPCTRL_RX_EP_TYPE_SHIFT (2) + +#define EPCOMPLETE_MAX_ENDPOINTS (16) + +/* endpoint list address bit masks */ +#define USB_EP_LIST_ADDRESS_MASK 0xfffff800 + +#define PORTSCX_W1C_BITS 0x2a +#define PORTSCX_PORT_RESET 0x00000100 +#define PORTSCX_PORT_POWER 0x00001000 +#define PORTSCX_FORCE_FULL_SPEED_CONNECT 0x01000000 +#define PORTSCX_PAR_XCVR_SELECT 0xC0000000 +#define PORTSCX_PORT_FORCE_RESUME 0x00000040 +#define PORTSCX_PORT_SUSPEND 0x00000080 +#define PORTSCX_PORT_SPEED_FULL 0x00000000 +#define PORTSCX_PORT_SPEED_LOW 0x04000000 +#define PORTSCX_PORT_SPEED_HIGH 0x08000000 +#define PORTSCX_PORT_SPEED_MASK 0x0C000000 + +/* USB MODE Register Bit Masks */ +#define USBMODE_CTRL_MODE_IDLE 0x00000000 +#define USBMODE_CTRL_MODE_DEVICE 0x00000002 +#define USBMODE_CTRL_MODE_HOST 0x00000003 +#define USBMODE_CTRL_MODE_RSV 0x00000001 +#define USBMODE_SETUP_LOCK_OFF 0x00000008 +#define USBMODE_STREAM_DISABLE 0x00000010 + +/* USB STS Register Bit Masks */ +#define USBSTS_INT 0x00000001 +#define USBSTS_ERR 0x00000002 +#define USBSTS_PORT_CHANGE 0x00000004 +#define USBSTS_FRM_LST_ROLL 0x00000008 +#define USBSTS_SYS_ERR 0x00000010 +#define USBSTS_IAA 0x00000020 +#define USBSTS_RESET 0x00000040 +#define USBSTS_SOF 0x00000080 +#define USBSTS_SUSPEND 0x00000100 +#define USBSTS_HC_HALTED 0x00001000 +#define USBSTS_RCL 0x00002000 +#define USBSTS_PERIODIC_SCHEDULE 0x00004000 +#define USBSTS_ASYNC_SCHEDULE 0x00008000 + + +/* Interrupt Enable Register Bit Masks */ +#define USBINTR_INT_EN (0x00000001) +#define USBINTR_ERR_INT_EN (0x00000002) +#define USBINTR_PORT_CHANGE_DETECT_EN (0x00000004) + +#define USBINTR_ASYNC_ADV_AAE (0x00000020) +#define USBINTR_ASYNC_ADV_AAE_ENABLE (0x00000020) +#define USBINTR_ASYNC_ADV_AAE_DISABLE (0xFFFFFFDF) + +#define USBINTR_RESET_EN (0x00000040) +#define USBINTR_SOF_UFRAME_EN (0x00000080) +#define USBINTR_DEVICE_SUSPEND (0x00000100) + +#define USB_DEVICE_ADDRESS_MASK (0xfe000000) +#define USB_DEVICE_ADDRESS_BIT_SHIFT (25) + +struct mv_cap_regs { + u32 caplength_hciversion; + u32 hcsparams; /* HC structural parameters */ + u32 hccparams; /* HC Capability Parameters*/ + u32 reserved[5]; + u32 dciversion; /* DC version number and reserved 16 bits */ + u32 dccparams; /* DC Capability Parameters */ +}; + +struct mv_op_regs { + u32 usbcmd; /* Command register */ + u32 usbsts; /* Status register */ + u32 usbintr; /* Interrupt enable */ + u32 frindex; /* Frame index */ + u32 reserved1[1]; + u32 deviceaddr; /* Device Address */ + u32 eplistaddr; /* Endpoint List Address */ + u32 ttctrl; /* HOST TT status and control */ + u32 burstsize; /* Programmable Burst Size */ + u32 txfilltuning; /* Host Transmit Pre-Buffer Packet Tuning */ + u32 reserved[4]; + u32 epnak; /* Endpoint NAK */ + u32 epnaken; /* Endpoint NAK Enable */ + u32 configflag; /* Configured Flag register */ + u32 portsc[VUSBHS_MAX_PORTS]; /* Port Status/Control x, x = 1..8 */ + u32 otgsc; + u32 usbmode; /* USB Host/Device mode */ + u32 epsetupstat; /* Endpoint Setup Status */ + u32 epprime; /* Endpoint Initialize */ + u32 epflush; /* Endpoint De-initialize */ + u32 epstatus; /* Endpoint Status */ + u32 epcomplete; /* Endpoint Interrupt On Complete */ + u32 epctrlx[16]; /* Endpoint Control, where x = 0.. 15 */ + u32 mcr; /* Mux Control */ + u32 isr; /* Interrupt Status */ + u32 ier; /* Interrupt Enable */ +}; + +struct mv_udc { + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + spinlock_t lock; + struct completion *done; + struct platform_device *dev; + int irq; + + struct mv_cap_regs __iomem *cap_regs; + struct mv_op_regs __iomem *op_regs; + void __iomem *phy_regs; + unsigned int max_eps; + struct mv_dqh *ep_dqh; + size_t ep_dqh_size; + dma_addr_t ep_dqh_dma; + + struct dma_pool *dtd_pool; + struct mv_ep *eps; + + struct mv_dtd *dtd_head; + struct mv_dtd *dtd_tail; + unsigned int dtd_entries; + + struct mv_req *status_req; + struct usb_ctrlrequest local_setup_buff; + + unsigned int resume_state; /* USB state to resume */ + unsigned int usb_state; /* USB current state */ + unsigned int ep0_state; /* Endpoint zero state */ + unsigned int ep0_dir; + + unsigned int dev_addr; + unsigned int test_mode; + + int errors; + unsigned softconnect:1, + vbus_active:1, + remote_wakeup:1, + softconnected:1, + force_fs:1, + clock_gating:1, + active:1, + stopped:1; /* stop bit is setted */ + + struct work_struct vbus_work; + struct workqueue_struct *qwork; + + struct usb_phy *transceiver; + + struct mv_usb_platform_data *pdata; + + /* some SOC has mutiple clock sources for USB*/ + struct clk *clk; +}; + +/* endpoint data structure */ +struct mv_ep { + struct usb_ep ep; + struct mv_udc *udc; + struct list_head queue; + struct mv_dqh *dqh; + u32 direction; + char name[14]; + unsigned stopped:1, + wedge:1, + ep_type:2, + ep_num:8; +}; + +/* request data structure */ +struct mv_req { + struct usb_request req; + struct mv_dtd *dtd, *head, *tail; + struct mv_ep *ep; + struct list_head queue; + unsigned int test_mode; + unsigned dtd_count; + unsigned mapped:1; +}; + +#define EP_QUEUE_HEAD_MULT_POS 30 +#define EP_QUEUE_HEAD_ZLT_SEL 0x20000000 +#define EP_QUEUE_HEAD_MAX_PKT_LEN_POS 16 +#define EP_QUEUE_HEAD_MAX_PKT_LEN(ep_info) (((ep_info)>>16)&0x07ff) +#define EP_QUEUE_HEAD_IOS 0x00008000 +#define EP_QUEUE_HEAD_NEXT_TERMINATE 0x00000001 +#define EP_QUEUE_HEAD_IOC 0x00008000 +#define EP_QUEUE_HEAD_MULTO 0x00000C00 +#define EP_QUEUE_HEAD_STATUS_HALT 0x00000040 +#define EP_QUEUE_HEAD_STATUS_ACTIVE 0x00000080 +#define EP_QUEUE_CURRENT_OFFSET_MASK 0x00000FFF +#define EP_QUEUE_HEAD_NEXT_POINTER_MASK 0xFFFFFFE0 +#define EP_QUEUE_FRINDEX_MASK 0x000007FF +#define EP_MAX_LENGTH_TRANSFER 0x4000 + +struct mv_dqh { + /* Bits 16..26 Bit 15 is Interrupt On Setup */ + u32 max_packet_length; + u32 curr_dtd_ptr; /* Current dTD Pointer */ + u32 next_dtd_ptr; /* Next dTD Pointer */ + /* Total bytes (16..30), IOC (15), INT (8), STS (0-7) */ + u32 size_ioc_int_sts; + u32 buff_ptr0; /* Buffer pointer Page 0 (12-31) */ + u32 buff_ptr1; /* Buffer pointer Page 1 (12-31) */ + u32 buff_ptr2; /* Buffer pointer Page 2 (12-31) */ + u32 buff_ptr3; /* Buffer pointer Page 3 (12-31) */ + u32 buff_ptr4; /* Buffer pointer Page 4 (12-31) */ + u32 reserved1; + /* 8 bytes of setup data that follows the Setup PID */ + u8 setup_buffer[8]; + u32 reserved2[4]; +}; + + +#define DTD_NEXT_TERMINATE (0x00000001) +#define DTD_IOC (0x00008000) +#define DTD_STATUS_ACTIVE (0x00000080) +#define DTD_STATUS_HALTED (0x00000040) +#define DTD_STATUS_DATA_BUFF_ERR (0x00000020) +#define DTD_STATUS_TRANSACTION_ERR (0x00000008) +#define DTD_RESERVED_FIELDS (0x00007F00) +#define DTD_ERROR_MASK (0x68) +#define DTD_ADDR_MASK (0xFFFFFFE0) +#define DTD_PACKET_SIZE 0x7FFF0000 +#define DTD_LENGTH_BIT_POS (16) + +struct mv_dtd { + u32 dtd_next; + u32 size_ioc_sts; + u32 buff_ptr0; /* Buffer pointer Page 0 */ + u32 buff_ptr1; /* Buffer pointer Page 1 */ + u32 buff_ptr2; /* Buffer pointer Page 2 */ + u32 buff_ptr3; /* Buffer pointer Page 3 */ + u32 buff_ptr4; /* Buffer pointer Page 4 */ + u32 scratch_ptr; + /* 32 bytes */ + dma_addr_t td_dma; /* dma address for this td */ + struct mv_dtd *next_dtd_virt; +}; + +#endif diff --git a/drivers/usb/gadget/udc/mv_udc_core.c b/drivers/usb/gadget/udc/mv_udc_core.c new file mode 100644 index 000000000..b397f3a84 --- /dev/null +++ b/drivers/usb/gadget/udc/mv_udc_core.c @@ -0,0 +1,2424 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + * Author: Chao Xie <chao.xie@marvell.com> + * Neil Zhang <zhangwm@marvell.com> + */ + +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/dmapool.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/otg.h> +#include <linux/pm.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/platform_data/mv_usb.h> +#include <asm/unaligned.h> + +#include "mv_udc.h" + +#define DRIVER_DESC "Marvell PXA USB Device Controller driver" + +#define ep_dir(ep) (((ep)->ep_num == 0) ? \ + ((ep)->udc->ep0_dir) : ((ep)->direction)) + +/* timeout value -- usec */ +#define RESET_TIMEOUT 10000 +#define FLUSH_TIMEOUT 10000 +#define EPSTATUS_TIMEOUT 10000 +#define PRIME_TIMEOUT 10000 +#define READSAFE_TIMEOUT 1000 + +#define LOOPS_USEC_SHIFT 1 +#define LOOPS_USEC (1 << LOOPS_USEC_SHIFT) +#define LOOPS(timeout) ((timeout) >> LOOPS_USEC_SHIFT) + +static DECLARE_COMPLETION(release_done); + +static const char driver_name[] = "mv_udc"; + +static void nuke(struct mv_ep *ep, int status); +static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver); + +/* for endpoint 0 operations */ +static const struct usb_endpoint_descriptor mv_ep0_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 0, + .bmAttributes = USB_ENDPOINT_XFER_CONTROL, + .wMaxPacketSize = EP0_MAX_PKT_SIZE, +}; + +static void ep0_reset(struct mv_udc *udc) +{ + struct mv_ep *ep; + u32 epctrlx; + int i = 0; + + /* ep0 in and out */ + for (i = 0; i < 2; i++) { + ep = &udc->eps[i]; + ep->udc = udc; + + /* ep0 dQH */ + ep->dqh = &udc->ep_dqh[i]; + + /* configure ep0 endpoint capabilities in dQH */ + ep->dqh->max_packet_length = + (EP0_MAX_PKT_SIZE << EP_QUEUE_HEAD_MAX_PKT_LEN_POS) + | EP_QUEUE_HEAD_IOS; + + ep->dqh->next_dtd_ptr = EP_QUEUE_HEAD_NEXT_TERMINATE; + + epctrlx = readl(&udc->op_regs->epctrlx[0]); + if (i) { /* TX */ + epctrlx |= EPCTRL_TX_ENABLE + | (USB_ENDPOINT_XFER_CONTROL + << EPCTRL_TX_EP_TYPE_SHIFT); + + } else { /* RX */ + epctrlx |= EPCTRL_RX_ENABLE + | (USB_ENDPOINT_XFER_CONTROL + << EPCTRL_RX_EP_TYPE_SHIFT); + } + + writel(epctrlx, &udc->op_regs->epctrlx[0]); + } +} + +/* protocol ep0 stall, will automatically be cleared on new transaction */ +static void ep0_stall(struct mv_udc *udc) +{ + u32 epctrlx; + + /* set TX and RX to stall */ + epctrlx = readl(&udc->op_regs->epctrlx[0]); + epctrlx |= EPCTRL_RX_EP_STALL | EPCTRL_TX_EP_STALL; + writel(epctrlx, &udc->op_regs->epctrlx[0]); + + /* update ep0 state */ + udc->ep0_state = WAIT_FOR_SETUP; + udc->ep0_dir = EP_DIR_OUT; +} + +static int process_ep_req(struct mv_udc *udc, int index, + struct mv_req *curr_req) +{ + struct mv_dtd *curr_dtd; + struct mv_dqh *curr_dqh; + int actual, remaining_length; + int i, direction; + int retval = 0; + u32 errors; + u32 bit_pos; + + curr_dqh = &udc->ep_dqh[index]; + direction = index % 2; + + curr_dtd = curr_req->head; + actual = curr_req->req.length; + + for (i = 0; i < curr_req->dtd_count; i++) { + if (curr_dtd->size_ioc_sts & DTD_STATUS_ACTIVE) { + dev_dbg(&udc->dev->dev, "%s, dTD not completed\n", + udc->eps[index].name); + return 1; + } + + errors = curr_dtd->size_ioc_sts & DTD_ERROR_MASK; + if (!errors) { + remaining_length = + (curr_dtd->size_ioc_sts & DTD_PACKET_SIZE) + >> DTD_LENGTH_BIT_POS; + actual -= remaining_length; + + if (remaining_length) { + if (direction) { + dev_dbg(&udc->dev->dev, + "TX dTD remains data\n"); + retval = -EPROTO; + break; + } else + break; + } + } else { + dev_info(&udc->dev->dev, + "complete_tr error: ep=%d %s: error = 0x%x\n", + index >> 1, direction ? "SEND" : "RECV", + errors); + if (errors & DTD_STATUS_HALTED) { + /* Clear the errors and Halt condition */ + curr_dqh->size_ioc_int_sts &= ~errors; + retval = -EPIPE; + } else if (errors & DTD_STATUS_DATA_BUFF_ERR) { + retval = -EPROTO; + } else if (errors & DTD_STATUS_TRANSACTION_ERR) { + retval = -EILSEQ; + } + } + if (i != curr_req->dtd_count - 1) + curr_dtd = (struct mv_dtd *)curr_dtd->next_dtd_virt; + } + if (retval) + return retval; + + if (direction == EP_DIR_OUT) + bit_pos = 1 << curr_req->ep->ep_num; + else + bit_pos = 1 << (16 + curr_req->ep->ep_num); + + while (curr_dqh->curr_dtd_ptr == curr_dtd->td_dma) { + if (curr_dtd->dtd_next == EP_QUEUE_HEAD_NEXT_TERMINATE) { + while (readl(&udc->op_regs->epstatus) & bit_pos) + udelay(1); + break; + } + udelay(1); + } + + curr_req->req.actual = actual; + + return 0; +} + +/* + * done() - retire a request; caller blocked irqs + * @status : request status to be set, only works when + * request is still in progress. + */ +static void done(struct mv_ep *ep, struct mv_req *req, int status) + __releases(&ep->udc->lock) + __acquires(&ep->udc->lock) +{ + struct mv_udc *udc = NULL; + unsigned char stopped = ep->stopped; + struct mv_dtd *curr_td, *next_td; + int j; + + udc = (struct mv_udc *)ep->udc; + /* Removed the req from fsl_ep->queue */ + list_del_init(&req->queue); + + /* req.status should be set as -EINPROGRESS in ep_queue() */ + if (req->req.status == -EINPROGRESS) + req->req.status = status; + else + status = req->req.status; + + /* Free dtd for the request */ + next_td = req->head; + for (j = 0; j < req->dtd_count; j++) { + curr_td = next_td; + if (j != req->dtd_count - 1) + next_td = curr_td->next_dtd_virt; + dma_pool_free(udc->dtd_pool, curr_td, curr_td->td_dma); + } + + usb_gadget_unmap_request(&udc->gadget, &req->req, ep_dir(ep)); + + if (status && (status != -ESHUTDOWN)) + dev_info(&udc->dev->dev, "complete %s req %p stat %d len %u/%u", + ep->ep.name, &req->req, status, + req->req.actual, req->req.length); + + ep->stopped = 1; + + spin_unlock(&ep->udc->lock); + + usb_gadget_giveback_request(&ep->ep, &req->req); + + spin_lock(&ep->udc->lock); + ep->stopped = stopped; +} + +static int queue_dtd(struct mv_ep *ep, struct mv_req *req) +{ + struct mv_udc *udc; + struct mv_dqh *dqh; + u32 bit_pos, direction; + u32 usbcmd, epstatus; + unsigned int loops; + int retval = 0; + + udc = ep->udc; + direction = ep_dir(ep); + dqh = &(udc->ep_dqh[ep->ep_num * 2 + direction]); + bit_pos = 1 << (((direction == EP_DIR_OUT) ? 0 : 16) + ep->ep_num); + + /* check if the pipe is empty */ + if (!(list_empty(&ep->queue))) { + struct mv_req *lastreq; + lastreq = list_entry(ep->queue.prev, struct mv_req, queue); + lastreq->tail->dtd_next = + req->head->td_dma & EP_QUEUE_HEAD_NEXT_POINTER_MASK; + + wmb(); + + if (readl(&udc->op_regs->epprime) & bit_pos) + goto done; + + loops = LOOPS(READSAFE_TIMEOUT); + while (1) { + /* start with setting the semaphores */ + usbcmd = readl(&udc->op_regs->usbcmd); + usbcmd |= USBCMD_ATDTW_TRIPWIRE_SET; + writel(usbcmd, &udc->op_regs->usbcmd); + + /* read the endpoint status */ + epstatus = readl(&udc->op_regs->epstatus) & bit_pos; + + /* + * Reread the ATDTW semaphore bit to check if it is + * cleared. When hardware see a hazard, it will clear + * the bit or else we remain set to 1 and we can + * proceed with priming of endpoint if not already + * primed. + */ + if (readl(&udc->op_regs->usbcmd) + & USBCMD_ATDTW_TRIPWIRE_SET) + break; + + loops--; + if (loops == 0) { + dev_err(&udc->dev->dev, + "Timeout for ATDTW_TRIPWIRE...\n"); + retval = -ETIME; + goto done; + } + udelay(LOOPS_USEC); + } + + /* Clear the semaphore */ + usbcmd = readl(&udc->op_regs->usbcmd); + usbcmd &= USBCMD_ATDTW_TRIPWIRE_CLEAR; + writel(usbcmd, &udc->op_regs->usbcmd); + + if (epstatus) + goto done; + } + + /* Write dQH next pointer and terminate bit to 0 */ + dqh->next_dtd_ptr = req->head->td_dma + & EP_QUEUE_HEAD_NEXT_POINTER_MASK; + + /* clear active and halt bit, in case set from a previous error */ + dqh->size_ioc_int_sts &= ~(DTD_STATUS_ACTIVE | DTD_STATUS_HALTED); + + /* Ensure that updates to the QH will occur before priming. */ + wmb(); + + /* Prime the Endpoint */ + writel(bit_pos, &udc->op_regs->epprime); + +done: + return retval; +} + +static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length, + dma_addr_t *dma, int *is_last) +{ + struct mv_dtd *dtd; + struct mv_udc *udc; + struct mv_dqh *dqh; + u32 temp, mult = 0; + + /* how big will this transfer be? */ + if (usb_endpoint_xfer_isoc(req->ep->ep.desc)) { + dqh = req->ep->dqh; + mult = (dqh->max_packet_length >> EP_QUEUE_HEAD_MULT_POS) + & 0x3; + *length = min(req->req.length - req->req.actual, + (unsigned)(mult * req->ep->ep.maxpacket)); + } else + *length = min(req->req.length - req->req.actual, + (unsigned)EP_MAX_LENGTH_TRANSFER); + + udc = req->ep->udc; + + /* + * Be careful that no _GFP_HIGHMEM is set, + * or we can not use dma_to_virt + */ + dtd = dma_pool_alloc(udc->dtd_pool, GFP_ATOMIC, dma); + if (dtd == NULL) + return dtd; + + dtd->td_dma = *dma; + /* initialize buffer page pointers */ + temp = (u32)(req->req.dma + req->req.actual); + dtd->buff_ptr0 = cpu_to_le32(temp); + temp &= ~0xFFF; + dtd->buff_ptr1 = cpu_to_le32(temp + 0x1000); + dtd->buff_ptr2 = cpu_to_le32(temp + 0x2000); + dtd->buff_ptr3 = cpu_to_le32(temp + 0x3000); + dtd->buff_ptr4 = cpu_to_le32(temp + 0x4000); + + req->req.actual += *length; + + /* zlp is needed if req->req.zero is set */ + if (req->req.zero) { + if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0) + *is_last = 1; + else + *is_last = 0; + } else if (req->req.length == req->req.actual) + *is_last = 1; + else + *is_last = 0; + + /* Fill in the transfer size; set active bit */ + temp = ((*length << DTD_LENGTH_BIT_POS) | DTD_STATUS_ACTIVE); + + /* Enable interrupt for the last dtd of a request */ + if (*is_last && !req->req.no_interrupt) + temp |= DTD_IOC; + + temp |= mult << 10; + + dtd->size_ioc_sts = temp; + + mb(); + + return dtd; +} + +/* generate dTD linked list for a request */ +static int req_to_dtd(struct mv_req *req) +{ + unsigned count; + int is_last, is_first = 1; + struct mv_dtd *dtd, *last_dtd = NULL; + dma_addr_t dma; + + do { + dtd = build_dtd(req, &count, &dma, &is_last); + if (dtd == NULL) + return -ENOMEM; + + if (is_first) { + is_first = 0; + req->head = dtd; + } else { + last_dtd->dtd_next = dma; + last_dtd->next_dtd_virt = dtd; + } + last_dtd = dtd; + req->dtd_count++; + } while (!is_last); + + /* set terminate bit to 1 for the last dTD */ + dtd->dtd_next = DTD_NEXT_TERMINATE; + + req->tail = dtd; + + return 0; +} + +static int mv_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct mv_udc *udc; + struct mv_ep *ep; + struct mv_dqh *dqh; + u16 max = 0; + u32 bit_pos, epctrlx, direction; + const unsigned char zlt = 1; + unsigned char ios, mult; + unsigned long flags; + + ep = container_of(_ep, struct mv_ep, ep); + udc = ep->udc; + + if (!_ep || !desc + || desc->bDescriptorType != USB_DT_ENDPOINT) + return -EINVAL; + + if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + direction = ep_dir(ep); + max = usb_endpoint_maxp(desc); + + /* + * disable HW zero length termination select + * driver handles zero length packet through req->req.zero + */ + bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num); + + /* Check if the Endpoint is Primed */ + if ((readl(&udc->op_regs->epprime) & bit_pos) + || (readl(&udc->op_regs->epstatus) & bit_pos)) { + dev_info(&udc->dev->dev, + "ep=%d %s: Init ERROR: ENDPTPRIME=0x%x," + " ENDPTSTATUS=0x%x, bit_pos=0x%x\n", + (unsigned)ep->ep_num, direction ? "SEND" : "RECV", + (unsigned)readl(&udc->op_regs->epprime), + (unsigned)readl(&udc->op_regs->epstatus), + (unsigned)bit_pos); + goto en_done; + } + + /* Set the max packet length, interrupt on Setup and Mult fields */ + ios = 0; + mult = 0; + switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { + case USB_ENDPOINT_XFER_BULK: + case USB_ENDPOINT_XFER_INT: + break; + case USB_ENDPOINT_XFER_CONTROL: + ios = 1; + break; + case USB_ENDPOINT_XFER_ISOC: + /* Calculate transactions needed for high bandwidth iso */ + mult = usb_endpoint_maxp_mult(desc); + /* 3 transactions at most */ + if (mult > 3) + goto en_done; + break; + default: + goto en_done; + } + + spin_lock_irqsave(&udc->lock, flags); + /* Get the endpoint queue head address */ + dqh = ep->dqh; + dqh->max_packet_length = (max << EP_QUEUE_HEAD_MAX_PKT_LEN_POS) + | (mult << EP_QUEUE_HEAD_MULT_POS) + | (zlt ? EP_QUEUE_HEAD_ZLT_SEL : 0) + | (ios ? EP_QUEUE_HEAD_IOS : 0); + dqh->next_dtd_ptr = 1; + dqh->size_ioc_int_sts = 0; + + ep->ep.maxpacket = max; + ep->ep.desc = desc; + ep->stopped = 0; + + /* Enable the endpoint for Rx or Tx and set the endpoint type */ + epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]); + if (direction == EP_DIR_IN) { + epctrlx &= ~EPCTRL_TX_ALL_MASK; + epctrlx |= EPCTRL_TX_ENABLE | EPCTRL_TX_DATA_TOGGLE_RST + | ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + << EPCTRL_TX_EP_TYPE_SHIFT); + } else { + epctrlx &= ~EPCTRL_RX_ALL_MASK; + epctrlx |= EPCTRL_RX_ENABLE | EPCTRL_RX_DATA_TOGGLE_RST + | ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + << EPCTRL_RX_EP_TYPE_SHIFT); + } + writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]); + + /* + * Implement Guideline (GL# USB-7) The unused endpoint type must + * be programmed to bulk. + */ + epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]); + if ((epctrlx & EPCTRL_RX_ENABLE) == 0) { + epctrlx |= (USB_ENDPOINT_XFER_BULK + << EPCTRL_RX_EP_TYPE_SHIFT); + writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]); + } + + epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]); + if ((epctrlx & EPCTRL_TX_ENABLE) == 0) { + epctrlx |= (USB_ENDPOINT_XFER_BULK + << EPCTRL_TX_EP_TYPE_SHIFT); + writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]); + } + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +en_done: + return -EINVAL; +} + +static int mv_ep_disable(struct usb_ep *_ep) +{ + struct mv_udc *udc; + struct mv_ep *ep; + struct mv_dqh *dqh; + u32 epctrlx, direction; + unsigned long flags; + + ep = container_of(_ep, struct mv_ep, ep); + if ((_ep == NULL) || !ep->ep.desc) + return -EINVAL; + + udc = ep->udc; + + /* Get the endpoint queue head address */ + dqh = ep->dqh; + + spin_lock_irqsave(&udc->lock, flags); + + direction = ep_dir(ep); + + /* Reset the max packet length and the interrupt on Setup */ + dqh->max_packet_length = 0; + + /* Disable the endpoint for Rx or Tx and reset the endpoint type */ + epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]); + epctrlx &= ~((direction == EP_DIR_IN) + ? (EPCTRL_TX_ENABLE | EPCTRL_TX_TYPE) + : (EPCTRL_RX_ENABLE | EPCTRL_RX_TYPE)); + writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]); + + /* nuke all pending requests (does flush) */ + nuke(ep, -ESHUTDOWN); + + ep->ep.desc = NULL; + ep->stopped = 1; + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static struct usb_request * +mv_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) +{ + struct mv_req *req = NULL; + + req = kzalloc(sizeof *req, gfp_flags); + if (!req) + return NULL; + + req->req.dma = DMA_ADDR_INVALID; + INIT_LIST_HEAD(&req->queue); + + return &req->req; +} + +static void mv_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct mv_req *req = NULL; + + req = container_of(_req, struct mv_req, req); + + if (_req) + kfree(req); +} + +static void mv_ep_fifo_flush(struct usb_ep *_ep) +{ + struct mv_udc *udc; + u32 bit_pos, direction; + struct mv_ep *ep; + unsigned int loops; + + if (!_ep) + return; + + ep = container_of(_ep, struct mv_ep, ep); + if (!ep->ep.desc) + return; + + udc = ep->udc; + direction = ep_dir(ep); + + if (ep->ep_num == 0) + bit_pos = (1 << 16) | 1; + else if (direction == EP_DIR_OUT) + bit_pos = 1 << ep->ep_num; + else + bit_pos = 1 << (16 + ep->ep_num); + + loops = LOOPS(EPSTATUS_TIMEOUT); + do { + unsigned int inter_loops; + + if (loops == 0) { + dev_err(&udc->dev->dev, + "TIMEOUT for ENDPTSTATUS=0x%x, bit_pos=0x%x\n", + (unsigned)readl(&udc->op_regs->epstatus), + (unsigned)bit_pos); + return; + } + /* Write 1 to the Flush register */ + writel(bit_pos, &udc->op_regs->epflush); + + /* Wait until flushing completed */ + inter_loops = LOOPS(FLUSH_TIMEOUT); + while (readl(&udc->op_regs->epflush)) { + /* + * ENDPTFLUSH bit should be cleared to indicate this + * operation is complete + */ + if (inter_loops == 0) { + dev_err(&udc->dev->dev, + "TIMEOUT for ENDPTFLUSH=0x%x," + "bit_pos=0x%x\n", + (unsigned)readl(&udc->op_regs->epflush), + (unsigned)bit_pos); + return; + } + inter_loops--; + udelay(LOOPS_USEC); + } + loops--; + } while (readl(&udc->op_regs->epstatus) & bit_pos); +} + +/* queues (submits) an I/O request to an endpoint */ +static int +mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) +{ + struct mv_ep *ep = container_of(_ep, struct mv_ep, ep); + struct mv_req *req = container_of(_req, struct mv_req, req); + struct mv_udc *udc = ep->udc; + unsigned long flags; + int retval; + + /* catch various bogus parameters */ + if (!_req || !req->req.complete || !req->req.buf + || !list_empty(&req->queue)) { + dev_err(&udc->dev->dev, "%s, bad params", __func__); + return -EINVAL; + } + if (unlikely(!_ep || !ep->ep.desc)) { + dev_err(&udc->dev->dev, "%s, bad ep", __func__); + return -EINVAL; + } + + udc = ep->udc; + if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + req->ep = ep; + + /* map virtual address to hardware */ + retval = usb_gadget_map_request(&udc->gadget, _req, ep_dir(ep)); + if (retval) + return retval; + + req->req.status = -EINPROGRESS; + req->req.actual = 0; + req->dtd_count = 0; + + spin_lock_irqsave(&udc->lock, flags); + + /* build dtds and push them to device queue */ + if (!req_to_dtd(req)) { + retval = queue_dtd(ep, req); + if (retval) { + spin_unlock_irqrestore(&udc->lock, flags); + dev_err(&udc->dev->dev, "Failed to queue dtd\n"); + goto err_unmap_dma; + } + } else { + spin_unlock_irqrestore(&udc->lock, flags); + dev_err(&udc->dev->dev, "Failed to dma_pool_alloc\n"); + retval = -ENOMEM; + goto err_unmap_dma; + } + + /* Update ep0 state */ + if (ep->ep_num == 0) + udc->ep0_state = DATA_STATE_XMIT; + + /* irq handler advances the queue */ + list_add_tail(&req->queue, &ep->queue); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; + +err_unmap_dma: + usb_gadget_unmap_request(&udc->gadget, _req, ep_dir(ep)); + + return retval; +} + +static void mv_prime_ep(struct mv_ep *ep, struct mv_req *req) +{ + struct mv_dqh *dqh = ep->dqh; + u32 bit_pos; + + /* Write dQH next pointer and terminate bit to 0 */ + dqh->next_dtd_ptr = req->head->td_dma + & EP_QUEUE_HEAD_NEXT_POINTER_MASK; + + /* clear active and halt bit, in case set from a previous error */ + dqh->size_ioc_int_sts &= ~(DTD_STATUS_ACTIVE | DTD_STATUS_HALTED); + + /* Ensure that updates to the QH will occure before priming. */ + wmb(); + + bit_pos = 1 << (((ep_dir(ep) == EP_DIR_OUT) ? 0 : 16) + ep->ep_num); + + /* Prime the Endpoint */ + writel(bit_pos, &ep->udc->op_regs->epprime); +} + +/* dequeues (cancels, unlinks) an I/O request from an endpoint */ +static int mv_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct mv_ep *ep = container_of(_ep, struct mv_ep, ep); + struct mv_req *req = NULL, *iter; + struct mv_udc *udc = ep->udc; + unsigned long flags; + int stopped, ret = 0; + u32 epctrlx; + + if (!_ep || !_req) + return -EINVAL; + + spin_lock_irqsave(&ep->udc->lock, flags); + stopped = ep->stopped; + + /* Stop the ep before we deal with the queue */ + ep->stopped = 1; + epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]); + if (ep_dir(ep) == EP_DIR_IN) + epctrlx &= ~EPCTRL_TX_ENABLE; + else + epctrlx &= ~EPCTRL_RX_ENABLE; + writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry(iter, &ep->queue, queue) { + if (&iter->req != _req) + continue; + req = iter; + break; + } + if (!req) { + ret = -EINVAL; + goto out; + } + + /* The request is in progress, or completed but not dequeued */ + if (ep->queue.next == &req->queue) { + _req->status = -ECONNRESET; + mv_ep_fifo_flush(_ep); /* flush current transfer */ + + /* The request isn't the last request in this ep queue */ + if (req->queue.next != &ep->queue) { + struct mv_req *next_req; + + next_req = list_entry(req->queue.next, + struct mv_req, queue); + + /* Point the QH to the first TD of next request */ + mv_prime_ep(ep, next_req); + } else { + struct mv_dqh *qh; + + qh = ep->dqh; + qh->next_dtd_ptr = 1; + qh->size_ioc_int_sts = 0; + } + + /* The request hasn't been processed, patch up the TD chain */ + } else { + struct mv_req *prev_req; + + prev_req = list_entry(req->queue.prev, struct mv_req, queue); + writel(readl(&req->tail->dtd_next), + &prev_req->tail->dtd_next); + + } + + done(ep, req, -ECONNRESET); + + /* Enable EP */ +out: + epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]); + if (ep_dir(ep) == EP_DIR_IN) + epctrlx |= EPCTRL_TX_ENABLE; + else + epctrlx |= EPCTRL_RX_ENABLE; + writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]); + ep->stopped = stopped; + + spin_unlock_irqrestore(&ep->udc->lock, flags); + return ret; +} + +static void ep_set_stall(struct mv_udc *udc, u8 ep_num, u8 direction, int stall) +{ + u32 epctrlx; + + epctrlx = readl(&udc->op_regs->epctrlx[ep_num]); + + if (stall) { + if (direction == EP_DIR_IN) + epctrlx |= EPCTRL_TX_EP_STALL; + else + epctrlx |= EPCTRL_RX_EP_STALL; + } else { + if (direction == EP_DIR_IN) { + epctrlx &= ~EPCTRL_TX_EP_STALL; + epctrlx |= EPCTRL_TX_DATA_TOGGLE_RST; + } else { + epctrlx &= ~EPCTRL_RX_EP_STALL; + epctrlx |= EPCTRL_RX_DATA_TOGGLE_RST; + } + } + writel(epctrlx, &udc->op_regs->epctrlx[ep_num]); +} + +static int ep_is_stall(struct mv_udc *udc, u8 ep_num, u8 direction) +{ + u32 epctrlx; + + epctrlx = readl(&udc->op_regs->epctrlx[ep_num]); + + if (direction == EP_DIR_OUT) + return (epctrlx & EPCTRL_RX_EP_STALL) ? 1 : 0; + else + return (epctrlx & EPCTRL_TX_EP_STALL) ? 1 : 0; +} + +static int mv_ep_set_halt_wedge(struct usb_ep *_ep, int halt, int wedge) +{ + struct mv_ep *ep; + unsigned long flags; + int status = 0; + struct mv_udc *udc; + + ep = container_of(_ep, struct mv_ep, ep); + udc = ep->udc; + if (!_ep || !ep->ep.desc) { + status = -EINVAL; + goto out; + } + + if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + status = -EOPNOTSUPP; + goto out; + } + + /* + * Attempt to halt IN ep will fail if any transfer requests + * are still queue + */ + if (halt && (ep_dir(ep) == EP_DIR_IN) && !list_empty(&ep->queue)) { + status = -EAGAIN; + goto out; + } + + spin_lock_irqsave(&ep->udc->lock, flags); + ep_set_stall(udc, ep->ep_num, ep_dir(ep), halt); + if (halt && wedge) + ep->wedge = 1; + else if (!halt) + ep->wedge = 0; + spin_unlock_irqrestore(&ep->udc->lock, flags); + + if (ep->ep_num == 0) { + udc->ep0_state = WAIT_FOR_SETUP; + udc->ep0_dir = EP_DIR_OUT; + } +out: + return status; +} + +static int mv_ep_set_halt(struct usb_ep *_ep, int halt) +{ + return mv_ep_set_halt_wedge(_ep, halt, 0); +} + +static int mv_ep_set_wedge(struct usb_ep *_ep) +{ + return mv_ep_set_halt_wedge(_ep, 1, 1); +} + +static const struct usb_ep_ops mv_ep_ops = { + .enable = mv_ep_enable, + .disable = mv_ep_disable, + + .alloc_request = mv_alloc_request, + .free_request = mv_free_request, + + .queue = mv_ep_queue, + .dequeue = mv_ep_dequeue, + + .set_wedge = mv_ep_set_wedge, + .set_halt = mv_ep_set_halt, + .fifo_flush = mv_ep_fifo_flush, /* flush fifo */ +}; + +static int udc_clock_enable(struct mv_udc *udc) +{ + return clk_prepare_enable(udc->clk); +} + +static void udc_clock_disable(struct mv_udc *udc) +{ + clk_disable_unprepare(udc->clk); +} + +static void udc_stop(struct mv_udc *udc) +{ + u32 tmp; + + /* Disable interrupts */ + tmp = readl(&udc->op_regs->usbintr); + tmp &= ~(USBINTR_INT_EN | USBINTR_ERR_INT_EN | + USBINTR_PORT_CHANGE_DETECT_EN | USBINTR_RESET_EN); + writel(tmp, &udc->op_regs->usbintr); + + udc->stopped = 1; + + /* Reset the Run the bit in the command register to stop VUSB */ + tmp = readl(&udc->op_regs->usbcmd); + tmp &= ~USBCMD_RUN_STOP; + writel(tmp, &udc->op_regs->usbcmd); +} + +static void udc_start(struct mv_udc *udc) +{ + u32 usbintr; + + usbintr = USBINTR_INT_EN | USBINTR_ERR_INT_EN + | USBINTR_PORT_CHANGE_DETECT_EN + | USBINTR_RESET_EN | USBINTR_DEVICE_SUSPEND; + /* Enable interrupts */ + writel(usbintr, &udc->op_regs->usbintr); + + udc->stopped = 0; + + /* Set the Run bit in the command register */ + writel(USBCMD_RUN_STOP, &udc->op_regs->usbcmd); +} + +static int udc_reset(struct mv_udc *udc) +{ + unsigned int loops; + u32 tmp, portsc; + + /* Stop the controller */ + tmp = readl(&udc->op_regs->usbcmd); + tmp &= ~USBCMD_RUN_STOP; + writel(tmp, &udc->op_regs->usbcmd); + + /* Reset the controller to get default values */ + writel(USBCMD_CTRL_RESET, &udc->op_regs->usbcmd); + + /* wait for reset to complete */ + loops = LOOPS(RESET_TIMEOUT); + while (readl(&udc->op_regs->usbcmd) & USBCMD_CTRL_RESET) { + if (loops == 0) { + dev_err(&udc->dev->dev, + "Wait for RESET completed TIMEOUT\n"); + return -ETIMEDOUT; + } + loops--; + udelay(LOOPS_USEC); + } + + /* set controller to device mode */ + tmp = readl(&udc->op_regs->usbmode); + tmp |= USBMODE_CTRL_MODE_DEVICE; + + /* turn setup lockout off, require setup tripwire in usbcmd */ + tmp |= USBMODE_SETUP_LOCK_OFF; + + writel(tmp, &udc->op_regs->usbmode); + + writel(0x0, &udc->op_regs->epsetupstat); + + /* Configure the Endpoint List Address */ + writel(udc->ep_dqh_dma & USB_EP_LIST_ADDRESS_MASK, + &udc->op_regs->eplistaddr); + + portsc = readl(&udc->op_regs->portsc[0]); + if (readl(&udc->cap_regs->hcsparams) & HCSPARAMS_PPC) + portsc &= (~PORTSCX_W1C_BITS | ~PORTSCX_PORT_POWER); + + if (udc->force_fs) + portsc |= PORTSCX_FORCE_FULL_SPEED_CONNECT; + else + portsc &= (~PORTSCX_FORCE_FULL_SPEED_CONNECT); + + writel(portsc, &udc->op_regs->portsc[0]); + + tmp = readl(&udc->op_regs->epctrlx[0]); + tmp &= ~(EPCTRL_TX_EP_STALL | EPCTRL_RX_EP_STALL); + writel(tmp, &udc->op_regs->epctrlx[0]); + + return 0; +} + +static int mv_udc_enable_internal(struct mv_udc *udc) +{ + int retval; + + if (udc->active) + return 0; + + dev_dbg(&udc->dev->dev, "enable udc\n"); + retval = udc_clock_enable(udc); + if (retval) + return retval; + + if (udc->pdata->phy_init) { + retval = udc->pdata->phy_init(udc->phy_regs); + if (retval) { + dev_err(&udc->dev->dev, + "init phy error %d\n", retval); + udc_clock_disable(udc); + return retval; + } + } + udc->active = 1; + + return 0; +} + +static int mv_udc_enable(struct mv_udc *udc) +{ + if (udc->clock_gating) + return mv_udc_enable_internal(udc); + + return 0; +} + +static void mv_udc_disable_internal(struct mv_udc *udc) +{ + if (udc->active) { + dev_dbg(&udc->dev->dev, "disable udc\n"); + if (udc->pdata->phy_deinit) + udc->pdata->phy_deinit(udc->phy_regs); + udc_clock_disable(udc); + udc->active = 0; + } +} + +static void mv_udc_disable(struct mv_udc *udc) +{ + if (udc->clock_gating) + mv_udc_disable_internal(udc); +} + +static int mv_udc_get_frame(struct usb_gadget *gadget) +{ + struct mv_udc *udc; + u16 retval; + + if (!gadget) + return -ENODEV; + + udc = container_of(gadget, struct mv_udc, gadget); + + retval = readl(&udc->op_regs->frindex) & USB_FRINDEX_MASKS; + + return retval; +} + +/* Tries to wake up the host connected to this gadget */ +static int mv_udc_wakeup(struct usb_gadget *gadget) +{ + struct mv_udc *udc = container_of(gadget, struct mv_udc, gadget); + u32 portsc; + + /* Remote wakeup feature not enabled by host */ + if (!udc->remote_wakeup) + return -ENOTSUPP; + + portsc = readl(&udc->op_regs->portsc); + /* not suspended? */ + if (!(portsc & PORTSCX_PORT_SUSPEND)) + return 0; + /* trigger force resume */ + portsc |= PORTSCX_PORT_FORCE_RESUME; + writel(portsc, &udc->op_regs->portsc[0]); + return 0; +} + +static int mv_udc_vbus_session(struct usb_gadget *gadget, int is_active) +{ + struct mv_udc *udc; + unsigned long flags; + int retval = 0; + + udc = container_of(gadget, struct mv_udc, gadget); + spin_lock_irqsave(&udc->lock, flags); + + udc->vbus_active = (is_active != 0); + + dev_dbg(&udc->dev->dev, "%s: softconnect %d, vbus_active %d\n", + __func__, udc->softconnect, udc->vbus_active); + + if (udc->driver && udc->softconnect && udc->vbus_active) { + retval = mv_udc_enable(udc); + if (retval == 0) { + /* Clock is disabled, need re-init registers */ + udc_reset(udc); + ep0_reset(udc); + udc_start(udc); + } + } else if (udc->driver && udc->softconnect) { + if (!udc->active) + goto out; + + /* stop all the transfer in queue*/ + stop_activity(udc, udc->driver); + udc_stop(udc); + mv_udc_disable(udc); + } + +out: + spin_unlock_irqrestore(&udc->lock, flags); + return retval; +} + +static int mv_udc_pullup(struct usb_gadget *gadget, int is_on) +{ + struct mv_udc *udc; + unsigned long flags; + int retval = 0; + + udc = container_of(gadget, struct mv_udc, gadget); + spin_lock_irqsave(&udc->lock, flags); + + udc->softconnect = (is_on != 0); + + dev_dbg(&udc->dev->dev, "%s: softconnect %d, vbus_active %d\n", + __func__, udc->softconnect, udc->vbus_active); + + if (udc->driver && udc->softconnect && udc->vbus_active) { + retval = mv_udc_enable(udc); + if (retval == 0) { + /* Clock is disabled, need re-init registers */ + udc_reset(udc); + ep0_reset(udc); + udc_start(udc); + } + } else if (udc->driver && udc->vbus_active) { + /* stop all the transfer in queue*/ + stop_activity(udc, udc->driver); + udc_stop(udc); + mv_udc_disable(udc); + } + + spin_unlock_irqrestore(&udc->lock, flags); + return retval; +} + +static int mv_udc_start(struct usb_gadget *, struct usb_gadget_driver *); +static int mv_udc_stop(struct usb_gadget *); +/* device controller usb_gadget_ops structure */ +static const struct usb_gadget_ops mv_ops = { + + /* returns the current frame number */ + .get_frame = mv_udc_get_frame, + + /* tries to wake up the host connected to this gadget */ + .wakeup = mv_udc_wakeup, + + /* notify controller that VBUS is powered or not */ + .vbus_session = mv_udc_vbus_session, + + /* D+ pullup, software-controlled connect/disconnect to USB host */ + .pullup = mv_udc_pullup, + .udc_start = mv_udc_start, + .udc_stop = mv_udc_stop, +}; + +static int eps_init(struct mv_udc *udc) +{ + struct mv_ep *ep; + char name[14]; + int i; + + /* initialize ep0 */ + ep = &udc->eps[0]; + ep->udc = udc; + strncpy(ep->name, "ep0", sizeof(ep->name)); + ep->ep.name = ep->name; + ep->ep.ops = &mv_ep_ops; + ep->wedge = 0; + ep->stopped = 0; + usb_ep_set_maxpacket_limit(&ep->ep, EP0_MAX_PKT_SIZE); + ep->ep.caps.type_control = true; + ep->ep.caps.dir_in = true; + ep->ep.caps.dir_out = true; + ep->ep_num = 0; + ep->ep.desc = &mv_ep0_desc; + INIT_LIST_HEAD(&ep->queue); + + ep->ep_type = USB_ENDPOINT_XFER_CONTROL; + + /* initialize other endpoints */ + for (i = 2; i < udc->max_eps * 2; i++) { + ep = &udc->eps[i]; + if (i % 2) { + snprintf(name, sizeof(name), "ep%din", i / 2); + ep->direction = EP_DIR_IN; + ep->ep.caps.dir_in = true; + } else { + snprintf(name, sizeof(name), "ep%dout", i / 2); + ep->direction = EP_DIR_OUT; + ep->ep.caps.dir_out = true; + } + ep->udc = udc; + strncpy(ep->name, name, sizeof(ep->name)); + ep->ep.name = ep->name; + + ep->ep.caps.type_iso = true; + ep->ep.caps.type_bulk = true; + ep->ep.caps.type_int = true; + + ep->ep.ops = &mv_ep_ops; + ep->stopped = 0; + usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0); + ep->ep_num = i / 2; + + INIT_LIST_HEAD(&ep->queue); + list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); + + ep->dqh = &udc->ep_dqh[i]; + } + + return 0; +} + +/* delete all endpoint requests, called with spinlock held */ +static void nuke(struct mv_ep *ep, int status) +{ + /* called with spinlock held */ + ep->stopped = 1; + + /* endpoint fifo flush */ + mv_ep_fifo_flush(&ep->ep); + + while (!list_empty(&ep->queue)) { + struct mv_req *req = NULL; + req = list_entry(ep->queue.next, struct mv_req, queue); + done(ep, req, status); + } +} + +static void gadget_reset(struct mv_udc *udc, struct usb_gadget_driver *driver) +{ + struct mv_ep *ep; + + nuke(&udc->eps[0], -ESHUTDOWN); + + list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) { + nuke(ep, -ESHUTDOWN); + } + + /* report reset; the driver is already quiesced */ + if (driver) { + spin_unlock(&udc->lock); + usb_gadget_udc_reset(&udc->gadget, driver); + spin_lock(&udc->lock); + } +} +/* stop all USB activities */ +static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver) +{ + struct mv_ep *ep; + + nuke(&udc->eps[0], -ESHUTDOWN); + + list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) { + nuke(ep, -ESHUTDOWN); + } + + /* report disconnect; the driver is already quiesced */ + if (driver) { + spin_unlock(&udc->lock); + driver->disconnect(&udc->gadget); + spin_lock(&udc->lock); + } +} + +static int mv_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct mv_udc *udc; + int retval = 0; + unsigned long flags; + + udc = container_of(gadget, struct mv_udc, gadget); + + if (udc->driver) + return -EBUSY; + + spin_lock_irqsave(&udc->lock, flags); + + /* hook up the driver ... */ + udc->driver = driver; + + udc->usb_state = USB_STATE_ATTACHED; + udc->ep0_state = WAIT_FOR_SETUP; + udc->ep0_dir = EP_DIR_OUT; + + spin_unlock_irqrestore(&udc->lock, flags); + + if (udc->transceiver) { + retval = otg_set_peripheral(udc->transceiver->otg, + &udc->gadget); + if (retval) { + dev_err(&udc->dev->dev, + "unable to register peripheral to otg\n"); + udc->driver = NULL; + return retval; + } + } + + /* When boot with cable attached, there will be no vbus irq occurred */ + if (udc->qwork) + queue_work(udc->qwork, &udc->vbus_work); + + return 0; +} + +static int mv_udc_stop(struct usb_gadget *gadget) +{ + struct mv_udc *udc; + unsigned long flags; + + udc = container_of(gadget, struct mv_udc, gadget); + + spin_lock_irqsave(&udc->lock, flags); + + mv_udc_enable(udc); + udc_stop(udc); + + /* stop all usb activities */ + udc->gadget.speed = USB_SPEED_UNKNOWN; + stop_activity(udc, NULL); + mv_udc_disable(udc); + + spin_unlock_irqrestore(&udc->lock, flags); + + /* unbind gadget driver */ + udc->driver = NULL; + + return 0; +} + +static void mv_set_ptc(struct mv_udc *udc, u32 mode) +{ + u32 portsc; + + portsc = readl(&udc->op_regs->portsc[0]); + portsc |= mode << 16; + writel(portsc, &udc->op_regs->portsc[0]); +} + +static void prime_status_complete(struct usb_ep *ep, struct usb_request *_req) +{ + struct mv_ep *mvep = container_of(ep, struct mv_ep, ep); + struct mv_req *req = container_of(_req, struct mv_req, req); + struct mv_udc *udc; + unsigned long flags; + + udc = mvep->udc; + + dev_info(&udc->dev->dev, "switch to test mode %d\n", req->test_mode); + + spin_lock_irqsave(&udc->lock, flags); + if (req->test_mode) { + mv_set_ptc(udc, req->test_mode); + req->test_mode = 0; + } + spin_unlock_irqrestore(&udc->lock, flags); +} + +static int +udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty) +{ + int retval = 0; + struct mv_req *req; + struct mv_ep *ep; + + ep = &udc->eps[0]; + udc->ep0_dir = direction; + udc->ep0_state = WAIT_FOR_OUT_STATUS; + + req = udc->status_req; + + /* fill in the reqest structure */ + if (empty == false) { + *((u16 *) req->req.buf) = cpu_to_le16(status); + req->req.length = 2; + } else + req->req.length = 0; + + req->ep = ep; + req->req.status = -EINPROGRESS; + req->req.actual = 0; + if (udc->test_mode) { + req->req.complete = prime_status_complete; + req->test_mode = udc->test_mode; + udc->test_mode = 0; + } else + req->req.complete = NULL; + req->dtd_count = 0; + + if (req->req.dma == DMA_ADDR_INVALID) { + req->req.dma = dma_map_single(ep->udc->gadget.dev.parent, + req->req.buf, req->req.length, + ep_dir(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + req->mapped = 1; + } + + /* prime the data phase */ + if (!req_to_dtd(req)) { + retval = queue_dtd(ep, req); + if (retval) { + dev_err(&udc->dev->dev, + "Failed to queue dtd when prime status\n"); + goto out; + } + } else{ /* no mem */ + retval = -ENOMEM; + dev_err(&udc->dev->dev, + "Failed to dma_pool_alloc when prime status\n"); + goto out; + } + + list_add_tail(&req->queue, &ep->queue); + + return 0; +out: + usb_gadget_unmap_request(&udc->gadget, &req->req, ep_dir(ep)); + + return retval; +} + +static void mv_udc_testmode(struct mv_udc *udc, u16 index) +{ + if (index <= USB_TEST_FORCE_ENABLE) { + udc->test_mode = index; + if (udc_prime_status(udc, EP_DIR_IN, 0, true)) + ep0_stall(udc); + } else + dev_err(&udc->dev->dev, + "This test mode(%d) is not supported\n", index); +} + +static void ch9setaddress(struct mv_udc *udc, struct usb_ctrlrequest *setup) +{ + udc->dev_addr = (u8)setup->wValue; + + /* update usb state */ + udc->usb_state = USB_STATE_ADDRESS; + + if (udc_prime_status(udc, EP_DIR_IN, 0, true)) + ep0_stall(udc); +} + +static void ch9getstatus(struct mv_udc *udc, u8 ep_num, + struct usb_ctrlrequest *setup) +{ + u16 status = 0; + int retval; + + if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK)) + != (USB_DIR_IN | USB_TYPE_STANDARD)) + return; + + if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) { + status = 1 << USB_DEVICE_SELF_POWERED; + status |= udc->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP; + } else if ((setup->bRequestType & USB_RECIP_MASK) + == USB_RECIP_INTERFACE) { + /* get interface status */ + status = 0; + } else if ((setup->bRequestType & USB_RECIP_MASK) + == USB_RECIP_ENDPOINT) { + u8 ep_num, direction; + + ep_num = setup->wIndex & USB_ENDPOINT_NUMBER_MASK; + direction = (setup->wIndex & USB_ENDPOINT_DIR_MASK) + ? EP_DIR_IN : EP_DIR_OUT; + status = ep_is_stall(udc, ep_num, direction) + << USB_ENDPOINT_HALT; + } + + retval = udc_prime_status(udc, EP_DIR_IN, status, false); + if (retval) + ep0_stall(udc); + else + udc->ep0_state = DATA_STATE_XMIT; +} + +static void ch9clearfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup) +{ + u8 ep_num; + u8 direction; + struct mv_ep *ep; + + if ((setup->bRequestType & (USB_TYPE_MASK | USB_RECIP_MASK)) + == ((USB_TYPE_STANDARD | USB_RECIP_DEVICE))) { + switch (setup->wValue) { + case USB_DEVICE_REMOTE_WAKEUP: + udc->remote_wakeup = 0; + break; + default: + goto out; + } + } else if ((setup->bRequestType & (USB_TYPE_MASK | USB_RECIP_MASK)) + == ((USB_TYPE_STANDARD | USB_RECIP_ENDPOINT))) { + switch (setup->wValue) { + case USB_ENDPOINT_HALT: + ep_num = setup->wIndex & USB_ENDPOINT_NUMBER_MASK; + direction = (setup->wIndex & USB_ENDPOINT_DIR_MASK) + ? EP_DIR_IN : EP_DIR_OUT; + if (setup->wValue != 0 || setup->wLength != 0 + || ep_num > udc->max_eps) + goto out; + ep = &udc->eps[ep_num * 2 + direction]; + if (ep->wedge == 1) + break; + spin_unlock(&udc->lock); + ep_set_stall(udc, ep_num, direction, 0); + spin_lock(&udc->lock); + break; + default: + goto out; + } + } else + goto out; + + if (udc_prime_status(udc, EP_DIR_IN, 0, true)) + ep0_stall(udc); +out: + return; +} + +static void ch9setfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup) +{ + u8 ep_num; + u8 direction; + + if ((setup->bRequestType & (USB_TYPE_MASK | USB_RECIP_MASK)) + == ((USB_TYPE_STANDARD | USB_RECIP_DEVICE))) { + switch (setup->wValue) { + case USB_DEVICE_REMOTE_WAKEUP: + udc->remote_wakeup = 1; + break; + case USB_DEVICE_TEST_MODE: + if (setup->wIndex & 0xFF + || udc->gadget.speed != USB_SPEED_HIGH) + ep0_stall(udc); + + if (udc->usb_state != USB_STATE_CONFIGURED + && udc->usb_state != USB_STATE_ADDRESS + && udc->usb_state != USB_STATE_DEFAULT) + ep0_stall(udc); + + mv_udc_testmode(udc, (setup->wIndex >> 8)); + goto out; + default: + goto out; + } + } else if ((setup->bRequestType & (USB_TYPE_MASK | USB_RECIP_MASK)) + == ((USB_TYPE_STANDARD | USB_RECIP_ENDPOINT))) { + switch (setup->wValue) { + case USB_ENDPOINT_HALT: + ep_num = setup->wIndex & USB_ENDPOINT_NUMBER_MASK; + direction = (setup->wIndex & USB_ENDPOINT_DIR_MASK) + ? EP_DIR_IN : EP_DIR_OUT; + if (setup->wValue != 0 || setup->wLength != 0 + || ep_num > udc->max_eps) + goto out; + spin_unlock(&udc->lock); + ep_set_stall(udc, ep_num, direction, 1); + spin_lock(&udc->lock); + break; + default: + goto out; + } + } else + goto out; + + if (udc_prime_status(udc, EP_DIR_IN, 0, true)) + ep0_stall(udc); +out: + return; +} + +static void handle_setup_packet(struct mv_udc *udc, u8 ep_num, + struct usb_ctrlrequest *setup) + __releases(&ep->udc->lock) + __acquires(&ep->udc->lock) +{ + bool delegate = false; + + nuke(&udc->eps[ep_num * 2 + EP_DIR_OUT], -ESHUTDOWN); + + dev_dbg(&udc->dev->dev, "SETUP %02x.%02x v%04x i%04x l%04x\n", + setup->bRequestType, setup->bRequest, + setup->wValue, setup->wIndex, setup->wLength); + /* We process some standard setup requests here */ + if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { + switch (setup->bRequest) { + case USB_REQ_GET_STATUS: + ch9getstatus(udc, ep_num, setup); + break; + + case USB_REQ_SET_ADDRESS: + ch9setaddress(udc, setup); + break; + + case USB_REQ_CLEAR_FEATURE: + ch9clearfeature(udc, setup); + break; + + case USB_REQ_SET_FEATURE: + ch9setfeature(udc, setup); + break; + + default: + delegate = true; + } + } else + delegate = true; + + /* delegate USB standard requests to the gadget driver */ + if (delegate == true) { + /* USB requests handled by gadget */ + if (setup->wLength) { + /* DATA phase from gadget, STATUS phase from udc */ + udc->ep0_dir = (setup->bRequestType & USB_DIR_IN) + ? EP_DIR_IN : EP_DIR_OUT; + spin_unlock(&udc->lock); + if (udc->driver->setup(&udc->gadget, + &udc->local_setup_buff) < 0) + ep0_stall(udc); + spin_lock(&udc->lock); + udc->ep0_state = (setup->bRequestType & USB_DIR_IN) + ? DATA_STATE_XMIT : DATA_STATE_RECV; + } else { + /* no DATA phase, IN STATUS phase from gadget */ + udc->ep0_dir = EP_DIR_IN; + spin_unlock(&udc->lock); + if (udc->driver->setup(&udc->gadget, + &udc->local_setup_buff) < 0) + ep0_stall(udc); + spin_lock(&udc->lock); + udc->ep0_state = WAIT_FOR_OUT_STATUS; + } + } +} + +/* complete DATA or STATUS phase of ep0 prime status phase if needed */ +static void ep0_req_complete(struct mv_udc *udc, + struct mv_ep *ep0, struct mv_req *req) +{ + u32 new_addr; + + if (udc->usb_state == USB_STATE_ADDRESS) { + /* set the new address */ + new_addr = (u32)udc->dev_addr; + writel(new_addr << USB_DEVICE_ADDRESS_BIT_SHIFT, + &udc->op_regs->deviceaddr); + } + + done(ep0, req, 0); + + switch (udc->ep0_state) { + case DATA_STATE_XMIT: + /* receive status phase */ + if (udc_prime_status(udc, EP_DIR_OUT, 0, true)) + ep0_stall(udc); + break; + case DATA_STATE_RECV: + /* send status phase */ + if (udc_prime_status(udc, EP_DIR_IN, 0 , true)) + ep0_stall(udc); + break; + case WAIT_FOR_OUT_STATUS: + udc->ep0_state = WAIT_FOR_SETUP; + break; + case WAIT_FOR_SETUP: + dev_err(&udc->dev->dev, "unexpect ep0 packets\n"); + break; + default: + ep0_stall(udc); + break; + } +} + +static void get_setup_data(struct mv_udc *udc, u8 ep_num, u8 *buffer_ptr) +{ + u32 temp; + struct mv_dqh *dqh; + + dqh = &udc->ep_dqh[ep_num * 2 + EP_DIR_OUT]; + + /* Clear bit in ENDPTSETUPSTAT */ + writel((1 << ep_num), &udc->op_regs->epsetupstat); + + /* while a hazard exists when setup package arrives */ + do { + /* Set Setup Tripwire */ + temp = readl(&udc->op_regs->usbcmd); + writel(temp | USBCMD_SETUP_TRIPWIRE_SET, &udc->op_regs->usbcmd); + + /* Copy the setup packet to local buffer */ + memcpy(buffer_ptr, (u8 *) dqh->setup_buffer, 8); + } while (!(readl(&udc->op_regs->usbcmd) & USBCMD_SETUP_TRIPWIRE_SET)); + + /* Clear Setup Tripwire */ + temp = readl(&udc->op_regs->usbcmd); + writel(temp & ~USBCMD_SETUP_TRIPWIRE_SET, &udc->op_regs->usbcmd); +} + +static void irq_process_tr_complete(struct mv_udc *udc) +{ + u32 tmp, bit_pos; + int i, ep_num = 0, direction = 0; + struct mv_ep *curr_ep; + struct mv_req *curr_req, *temp_req; + int status; + + /* + * We use separate loops for ENDPTSETUPSTAT and ENDPTCOMPLETE + * because the setup packets are to be read ASAP + */ + + /* Process all Setup packet received interrupts */ + tmp = readl(&udc->op_regs->epsetupstat); + + if (tmp) { + for (i = 0; i < udc->max_eps; i++) { + if (tmp & (1 << i)) { + get_setup_data(udc, i, + (u8 *)(&udc->local_setup_buff)); + handle_setup_packet(udc, i, + &udc->local_setup_buff); + } + } + } + + /* Don't clear the endpoint setup status register here. + * It is cleared as a setup packet is read out of the buffer + */ + + /* Process non-setup transaction complete interrupts */ + tmp = readl(&udc->op_regs->epcomplete); + + if (!tmp) + return; + + writel(tmp, &udc->op_regs->epcomplete); + + for (i = 0; i < udc->max_eps * 2; i++) { + ep_num = i >> 1; + direction = i % 2; + + bit_pos = 1 << (ep_num + 16 * direction); + + if (!(bit_pos & tmp)) + continue; + + if (i == 1) + curr_ep = &udc->eps[0]; + else + curr_ep = &udc->eps[i]; + /* process the req queue until an uncomplete request */ + list_for_each_entry_safe(curr_req, temp_req, + &curr_ep->queue, queue) { + status = process_ep_req(udc, i, curr_req); + if (status) + break; + + /* write back status to req */ + curr_req->req.status = status; + + /* ep0 request completion */ + if (ep_num == 0) { + ep0_req_complete(udc, curr_ep, curr_req); + break; + } else { + done(curr_ep, curr_req, status); + } + } + } +} + +static void irq_process_reset(struct mv_udc *udc) +{ + u32 tmp; + unsigned int loops; + + udc->ep0_dir = EP_DIR_OUT; + udc->ep0_state = WAIT_FOR_SETUP; + udc->remote_wakeup = 0; /* default to 0 on reset */ + + /* The address bits are past bit 25-31. Set the address */ + tmp = readl(&udc->op_regs->deviceaddr); + tmp &= ~(USB_DEVICE_ADDRESS_MASK); + writel(tmp, &udc->op_regs->deviceaddr); + + /* Clear all the setup token semaphores */ + tmp = readl(&udc->op_regs->epsetupstat); + writel(tmp, &udc->op_regs->epsetupstat); + + /* Clear all the endpoint complete status bits */ + tmp = readl(&udc->op_regs->epcomplete); + writel(tmp, &udc->op_regs->epcomplete); + + /* wait until all endptprime bits cleared */ + loops = LOOPS(PRIME_TIMEOUT); + while (readl(&udc->op_regs->epprime) & 0xFFFFFFFF) { + if (loops == 0) { + dev_err(&udc->dev->dev, + "Timeout for ENDPTPRIME = 0x%x\n", + readl(&udc->op_regs->epprime)); + break; + } + loops--; + udelay(LOOPS_USEC); + } + + /* Write 1s to the Flush register */ + writel((u32)~0, &udc->op_regs->epflush); + + if (readl(&udc->op_regs->portsc[0]) & PORTSCX_PORT_RESET) { + dev_info(&udc->dev->dev, "usb bus reset\n"); + udc->usb_state = USB_STATE_DEFAULT; + /* reset all the queues, stop all USB activities */ + gadget_reset(udc, udc->driver); + } else { + dev_info(&udc->dev->dev, "USB reset portsc 0x%x\n", + readl(&udc->op_regs->portsc)); + + /* + * re-initialize + * controller reset + */ + udc_reset(udc); + + /* reset all the queues, stop all USB activities */ + stop_activity(udc, udc->driver); + + /* reset ep0 dQH and endptctrl */ + ep0_reset(udc); + + /* enable interrupt and set controller to run state */ + udc_start(udc); + + udc->usb_state = USB_STATE_ATTACHED; + } +} + +static void handle_bus_resume(struct mv_udc *udc) +{ + udc->usb_state = udc->resume_state; + udc->resume_state = 0; + + /* report resume to the driver */ + if (udc->driver) { + if (udc->driver->resume) { + spin_unlock(&udc->lock); + udc->driver->resume(&udc->gadget); + spin_lock(&udc->lock); + } + } +} + +static void irq_process_suspend(struct mv_udc *udc) +{ + udc->resume_state = udc->usb_state; + udc->usb_state = USB_STATE_SUSPENDED; + + if (udc->driver->suspend) { + spin_unlock(&udc->lock); + udc->driver->suspend(&udc->gadget); + spin_lock(&udc->lock); + } +} + +static void irq_process_port_change(struct mv_udc *udc) +{ + u32 portsc; + + portsc = readl(&udc->op_regs->portsc[0]); + if (!(portsc & PORTSCX_PORT_RESET)) { + /* Get the speed */ + u32 speed = portsc & PORTSCX_PORT_SPEED_MASK; + switch (speed) { + case PORTSCX_PORT_SPEED_HIGH: + udc->gadget.speed = USB_SPEED_HIGH; + break; + case PORTSCX_PORT_SPEED_FULL: + udc->gadget.speed = USB_SPEED_FULL; + break; + case PORTSCX_PORT_SPEED_LOW: + udc->gadget.speed = USB_SPEED_LOW; + break; + default: + udc->gadget.speed = USB_SPEED_UNKNOWN; + break; + } + } + + if (portsc & PORTSCX_PORT_SUSPEND) { + udc->resume_state = udc->usb_state; + udc->usb_state = USB_STATE_SUSPENDED; + if (udc->driver->suspend) { + spin_unlock(&udc->lock); + udc->driver->suspend(&udc->gadget); + spin_lock(&udc->lock); + } + } + + if (!(portsc & PORTSCX_PORT_SUSPEND) + && udc->usb_state == USB_STATE_SUSPENDED) { + handle_bus_resume(udc); + } + + if (!udc->resume_state) + udc->usb_state = USB_STATE_DEFAULT; +} + +static void irq_process_error(struct mv_udc *udc) +{ + /* Increment the error count */ + udc->errors++; +} + +static irqreturn_t mv_udc_irq(int irq, void *dev) +{ + struct mv_udc *udc = (struct mv_udc *)dev; + u32 status, intr; + + /* Disable ISR when stopped bit is set */ + if (udc->stopped) + return IRQ_NONE; + + spin_lock(&udc->lock); + + status = readl(&udc->op_regs->usbsts); + intr = readl(&udc->op_regs->usbintr); + status &= intr; + + if (status == 0) { + spin_unlock(&udc->lock); + return IRQ_NONE; + } + + /* Clear all the interrupts occurred */ + writel(status, &udc->op_regs->usbsts); + + if (status & USBSTS_ERR) + irq_process_error(udc); + + if (status & USBSTS_RESET) + irq_process_reset(udc); + + if (status & USBSTS_PORT_CHANGE) + irq_process_port_change(udc); + + if (status & USBSTS_INT) + irq_process_tr_complete(udc); + + if (status & USBSTS_SUSPEND) + irq_process_suspend(udc); + + spin_unlock(&udc->lock); + + return IRQ_HANDLED; +} + +static irqreturn_t mv_udc_vbus_irq(int irq, void *dev) +{ + struct mv_udc *udc = (struct mv_udc *)dev; + + /* polling VBUS and init phy may cause too much time*/ + if (udc->qwork) + queue_work(udc->qwork, &udc->vbus_work); + + return IRQ_HANDLED; +} + +static void mv_udc_vbus_work(struct work_struct *work) +{ + struct mv_udc *udc; + unsigned int vbus; + + udc = container_of(work, struct mv_udc, vbus_work); + if (!udc->pdata->vbus) + return; + + vbus = udc->pdata->vbus->poll(); + dev_info(&udc->dev->dev, "vbus is %d\n", vbus); + + if (vbus == VBUS_HIGH) + mv_udc_vbus_session(&udc->gadget, 1); + else if (vbus == VBUS_LOW) + mv_udc_vbus_session(&udc->gadget, 0); +} + +/* release device structure */ +static void gadget_release(struct device *_dev) +{ + struct mv_udc *udc; + + udc = dev_get_drvdata(_dev); + + complete(udc->done); +} + +static int mv_udc_remove(struct platform_device *pdev) +{ + struct mv_udc *udc; + + udc = platform_get_drvdata(pdev); + + usb_del_gadget_udc(&udc->gadget); + + if (udc->qwork) + destroy_workqueue(udc->qwork); + + /* free memory allocated in probe */ + dma_pool_destroy(udc->dtd_pool); + + if (udc->ep_dqh) + dma_free_coherent(&pdev->dev, udc->ep_dqh_size, + udc->ep_dqh, udc->ep_dqh_dma); + + mv_udc_disable(udc); + + /* free dev, wait for the release() finished */ + wait_for_completion(udc->done); + + return 0; +} + +static int mv_udc_probe(struct platform_device *pdev) +{ + struct mv_usb_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct mv_udc *udc; + int retval = 0; + struct resource *r; + size_t size; + + if (pdata == NULL) { + dev_err(&pdev->dev, "missing platform_data\n"); + return -ENODEV; + } + + udc = devm_kzalloc(&pdev->dev, sizeof(*udc), GFP_KERNEL); + if (udc == NULL) + return -ENOMEM; + + udc->done = &release_done; + udc->pdata = dev_get_platdata(&pdev->dev); + spin_lock_init(&udc->lock); + + udc->dev = pdev; + + if (pdata->mode == MV_USB_MODE_OTG) { + udc->transceiver = devm_usb_get_phy(&pdev->dev, + USB_PHY_TYPE_USB2); + if (IS_ERR(udc->transceiver)) { + retval = PTR_ERR(udc->transceiver); + + if (retval == -ENXIO) + return retval; + + udc->transceiver = NULL; + return -EPROBE_DEFER; + } + } + + /* udc only have one sysclk. */ + udc->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(udc->clk)) + return PTR_ERR(udc->clk); + + r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "capregs"); + if (r == NULL) { + dev_err(&pdev->dev, "no I/O memory resource defined\n"); + return -ENODEV; + } + + udc->cap_regs = (struct mv_cap_regs __iomem *) + devm_ioremap(&pdev->dev, r->start, resource_size(r)); + if (udc->cap_regs == NULL) { + dev_err(&pdev->dev, "failed to map I/O memory\n"); + return -EBUSY; + } + + r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "phyregs"); + if (r == NULL) { + dev_err(&pdev->dev, "no phy I/O memory resource defined\n"); + return -ENODEV; + } + + udc->phy_regs = devm_ioremap(&pdev->dev, r->start, resource_size(r)); + if (udc->phy_regs == NULL) { + dev_err(&pdev->dev, "failed to map phy I/O memory\n"); + return -EBUSY; + } + + /* we will acces controller register, so enable the clk */ + retval = mv_udc_enable_internal(udc); + if (retval) + return retval; + + udc->op_regs = + (struct mv_op_regs __iomem *)((unsigned long)udc->cap_regs + + (readl(&udc->cap_regs->caplength_hciversion) + & CAPLENGTH_MASK)); + udc->max_eps = readl(&udc->cap_regs->dccparams) & DCCPARAMS_DEN_MASK; + + /* + * some platform will use usb to download image, it may not disconnect + * usb gadget before loading kernel. So first stop udc here. + */ + udc_stop(udc); + writel(0xFFFFFFFF, &udc->op_regs->usbsts); + + size = udc->max_eps * sizeof(struct mv_dqh) *2; + size = (size + DQH_ALIGNMENT - 1) & ~(DQH_ALIGNMENT - 1); + udc->ep_dqh = dma_alloc_coherent(&pdev->dev, size, + &udc->ep_dqh_dma, GFP_KERNEL); + + if (udc->ep_dqh == NULL) { + dev_err(&pdev->dev, "allocate dQH memory failed\n"); + retval = -ENOMEM; + goto err_disable_clock; + } + udc->ep_dqh_size = size; + + /* create dTD dma_pool resource */ + udc->dtd_pool = dma_pool_create("mv_dtd", + &pdev->dev, + sizeof(struct mv_dtd), + DTD_ALIGNMENT, + DMA_BOUNDARY); + + if (!udc->dtd_pool) { + retval = -ENOMEM; + goto err_free_dma; + } + + size = udc->max_eps * sizeof(struct mv_ep) *2; + udc->eps = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); + if (udc->eps == NULL) { + retval = -ENOMEM; + goto err_destroy_dma; + } + + /* initialize ep0 status request structure */ + udc->status_req = devm_kzalloc(&pdev->dev, sizeof(struct mv_req), + GFP_KERNEL); + if (!udc->status_req) { + retval = -ENOMEM; + goto err_destroy_dma; + } + INIT_LIST_HEAD(&udc->status_req->queue); + + /* allocate a small amount of memory to get valid address */ + udc->status_req->req.buf = kzalloc(8, GFP_KERNEL); + udc->status_req->req.dma = DMA_ADDR_INVALID; + + udc->resume_state = USB_STATE_NOTATTACHED; + udc->usb_state = USB_STATE_POWERED; + udc->ep0_dir = EP_DIR_OUT; + udc->remote_wakeup = 0; + + r = platform_get_resource(udc->dev, IORESOURCE_IRQ, 0); + if (r == NULL) { + dev_err(&pdev->dev, "no IRQ resource defined\n"); + retval = -ENODEV; + goto err_destroy_dma; + } + udc->irq = r->start; + if (devm_request_irq(&pdev->dev, udc->irq, mv_udc_irq, + IRQF_SHARED, driver_name, udc)) { + dev_err(&pdev->dev, "Request irq %d for UDC failed\n", + udc->irq); + retval = -ENODEV; + goto err_destroy_dma; + } + + /* initialize gadget structure */ + udc->gadget.ops = &mv_ops; /* usb_gadget_ops */ + udc->gadget.ep0 = &udc->eps[0].ep; /* gadget ep0 */ + INIT_LIST_HEAD(&udc->gadget.ep_list); /* ep_list */ + udc->gadget.speed = USB_SPEED_UNKNOWN; /* speed */ + udc->gadget.max_speed = USB_SPEED_HIGH; /* support dual speed */ + + /* the "gadget" abstracts/virtualizes the controller */ + udc->gadget.name = driver_name; /* gadget name */ + + eps_init(udc); + + /* VBUS detect: we can disable/enable clock on demand.*/ + if (udc->transceiver) + udc->clock_gating = 1; + else if (pdata->vbus) { + udc->clock_gating = 1; + retval = devm_request_threaded_irq(&pdev->dev, + pdata->vbus->irq, NULL, + mv_udc_vbus_irq, IRQF_ONESHOT, "vbus", udc); + if (retval) { + dev_info(&pdev->dev, + "Can not request irq for VBUS, " + "disable clock gating\n"); + udc->clock_gating = 0; + } + + udc->qwork = create_singlethread_workqueue("mv_udc_queue"); + if (!udc->qwork) { + dev_err(&pdev->dev, "cannot create workqueue\n"); + retval = -ENOMEM; + goto err_destroy_dma; + } + + INIT_WORK(&udc->vbus_work, mv_udc_vbus_work); + } + + /* + * When clock gating is supported, we can disable clk and phy. + * If not, it means that VBUS detection is not supported, we + * have to enable vbus active all the time to let controller work. + */ + if (udc->clock_gating) + mv_udc_disable_internal(udc); + else + udc->vbus_active = 1; + + retval = usb_add_gadget_udc_release(&pdev->dev, &udc->gadget, + gadget_release); + if (retval) + goto err_create_workqueue; + + platform_set_drvdata(pdev, udc); + dev_info(&pdev->dev, "successful probe UDC device %s clock gating.\n", + udc->clock_gating ? "with" : "without"); + + return 0; + +err_create_workqueue: + if (udc->qwork) + destroy_workqueue(udc->qwork); +err_destroy_dma: + dma_pool_destroy(udc->dtd_pool); +err_free_dma: + dma_free_coherent(&pdev->dev, udc->ep_dqh_size, + udc->ep_dqh, udc->ep_dqh_dma); +err_disable_clock: + mv_udc_disable_internal(udc); + + return retval; +} + +#ifdef CONFIG_PM +static int mv_udc_suspend(struct device *dev) +{ + struct mv_udc *udc; + + udc = dev_get_drvdata(dev); + + /* if OTG is enabled, the following will be done in OTG driver*/ + if (udc->transceiver) + return 0; + + if (udc->pdata->vbus && udc->pdata->vbus->poll) + if (udc->pdata->vbus->poll() == VBUS_HIGH) { + dev_info(&udc->dev->dev, "USB cable is connected!\n"); + return -EAGAIN; + } + + /* + * only cable is unplugged, udc can suspend. + * So do not care about clock_gating == 1. + */ + if (!udc->clock_gating) { + udc_stop(udc); + + spin_lock_irq(&udc->lock); + /* stop all usb activities */ + stop_activity(udc, udc->driver); + spin_unlock_irq(&udc->lock); + + mv_udc_disable_internal(udc); + } + + return 0; +} + +static int mv_udc_resume(struct device *dev) +{ + struct mv_udc *udc; + int retval; + + udc = dev_get_drvdata(dev); + + /* if OTG is enabled, the following will be done in OTG driver*/ + if (udc->transceiver) + return 0; + + if (!udc->clock_gating) { + retval = mv_udc_enable_internal(udc); + if (retval) + return retval; + + if (udc->driver && udc->softconnect) { + udc_reset(udc); + ep0_reset(udc); + udc_start(udc); + } + } + + return 0; +} + +static const struct dev_pm_ops mv_udc_pm_ops = { + .suspend = mv_udc_suspend, + .resume = mv_udc_resume, +}; +#endif + +static void mv_udc_shutdown(struct platform_device *pdev) +{ + struct mv_udc *udc; + u32 mode; + + udc = platform_get_drvdata(pdev); + /* reset controller mode to IDLE */ + mv_udc_enable(udc); + mode = readl(&udc->op_regs->usbmode); + mode &= ~3; + writel(mode, &udc->op_regs->usbmode); + mv_udc_disable(udc); +} + +static struct platform_driver udc_driver = { + .probe = mv_udc_probe, + .remove = mv_udc_remove, + .shutdown = mv_udc_shutdown, + .driver = { + .name = "mv-udc", +#ifdef CONFIG_PM + .pm = &mv_udc_pm_ops, +#endif + }, +}; + +module_platform_driver(udc_driver); +MODULE_ALIAS("platform:mv-udc"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Chao Xie <chao.xie@marvell.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/udc/net2272.c b/drivers/usb/gadget/udc/net2272.c new file mode 100644 index 000000000..538c1b9a2 --- /dev/null +++ b/drivers/usb/gadget/udc/net2272.c @@ -0,0 +1,2725 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for PLX NET2272 USB device controller + * + * Copyright (C) 2005-2006 PLX Technology, Inc. + * Copyright (C) 2006-2011 Analog Devices, Inc. + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/prefetch.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/timer.h> +#include <linux/usb.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + +#include <asm/byteorder.h> +#include <asm/unaligned.h> + +#include "net2272.h" + +#define DRIVER_DESC "PLX NET2272 USB Peripheral Controller" + +static const char driver_name[] = "net2272"; +static const char driver_vers[] = "2006 October 17/mainline"; +static const char driver_desc[] = DRIVER_DESC; + +static const char ep0name[] = "ep0"; +static const char * const ep_name[] = { + ep0name, + "ep-a", "ep-b", "ep-c", +}; + +#ifdef CONFIG_USB_NET2272_DMA +/* + * use_dma: the NET2272 can use an external DMA controller. + * Note that since there is no generic DMA api, some functions, + * notably request_dma, start_dma, and cancel_dma will need to be + * modified for your platform's particular dma controller. + * + * If use_dma is disabled, pio will be used instead. + */ +static bool use_dma = false; +module_param(use_dma, bool, 0644); + +/* + * dma_ep: selects the endpoint for use with dma (1=ep-a, 2=ep-b) + * The NET2272 can only use dma for a single endpoint at a time. + * At some point this could be modified to allow either endpoint + * to take control of dma as it becomes available. + * + * Note that DMA should not be used on OUT endpoints unless it can + * be guaranteed that no short packets will arrive on an IN endpoint + * while the DMA operation is pending. Otherwise the OUT DMA will + * terminate prematurely (See NET2272 Errata 630-0213-0101) + */ +static ushort dma_ep = 1; +module_param(dma_ep, ushort, 0644); + +/* + * dma_mode: net2272 dma mode setting (see LOCCTL1 definition): + * mode 0 == Slow DREQ mode + * mode 1 == Fast DREQ mode + * mode 2 == Burst mode + */ +static ushort dma_mode = 2; +module_param(dma_mode, ushort, 0644); +#else +#define use_dma 0 +#define dma_ep 1 +#define dma_mode 2 +#endif + +/* + * fifo_mode: net2272 buffer configuration: + * mode 0 == ep-{a,b,c} 512db each + * mode 1 == ep-a 1k, ep-{b,c} 512db + * mode 2 == ep-a 1k, ep-b 1k, ep-c 512db + * mode 3 == ep-a 1k, ep-b disabled, ep-c 512db + */ +static ushort fifo_mode; +module_param(fifo_mode, ushort, 0644); + +/* + * enable_suspend: When enabled, the driver will respond to + * USB suspend requests by powering down the NET2272. Otherwise, + * USB suspend requests will be ignored. This is acceptable for + * self-powered devices. For bus powered devices set this to 1. + */ +static ushort enable_suspend; +module_param(enable_suspend, ushort, 0644); + +static void assert_out_naking(struct net2272_ep *ep, const char *where) +{ + u8 tmp; + +#ifndef DEBUG + return; +#endif + + tmp = net2272_ep_read(ep, EP_STAT0); + if ((tmp & (1 << NAK_OUT_PACKETS)) == 0) { + dev_dbg(ep->dev->dev, "%s %s %02x !NAK\n", + ep->ep.name, where, tmp); + net2272_ep_write(ep, EP_RSPSET, 1 << ALT_NAK_OUT_PACKETS); + } +} +#define ASSERT_OUT_NAKING(ep) assert_out_naking(ep, __func__) + +static void stop_out_naking(struct net2272_ep *ep) +{ + u8 tmp = net2272_ep_read(ep, EP_STAT0); + + if ((tmp & (1 << NAK_OUT_PACKETS)) != 0) + net2272_ep_write(ep, EP_RSPCLR, 1 << ALT_NAK_OUT_PACKETS); +} + +#define PIPEDIR(bAddress) (usb_pipein(bAddress) ? "in" : "out") + +static char *type_string(u8 bmAttributes) +{ + switch ((bmAttributes) & USB_ENDPOINT_XFERTYPE_MASK) { + case USB_ENDPOINT_XFER_BULK: return "bulk"; + case USB_ENDPOINT_XFER_ISOC: return "iso"; + case USB_ENDPOINT_XFER_INT: return "intr"; + default: return "control"; + } +} + +static char *buf_state_string(unsigned state) +{ + switch (state) { + case BUFF_FREE: return "free"; + case BUFF_VALID: return "valid"; + case BUFF_LCL: return "local"; + case BUFF_USB: return "usb"; + default: return "unknown"; + } +} + +static char *dma_mode_string(void) +{ + if (!use_dma) + return "PIO"; + switch (dma_mode) { + case 0: return "SLOW DREQ"; + case 1: return "FAST DREQ"; + case 2: return "BURST"; + default: return "invalid"; + } +} + +static void net2272_dequeue_all(struct net2272_ep *); +static int net2272_kick_dma(struct net2272_ep *, struct net2272_request *); +static int net2272_fifo_status(struct usb_ep *); + +static const struct usb_ep_ops net2272_ep_ops; + +/*---------------------------------------------------------------------------*/ + +static int +net2272_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) +{ + struct net2272 *dev; + struct net2272_ep *ep; + u32 max; + u8 tmp; + unsigned long flags; + + ep = container_of(_ep, struct net2272_ep, ep); + if (!_ep || !desc || ep->desc || _ep->name == ep0name + || desc->bDescriptorType != USB_DT_ENDPOINT) + return -EINVAL; + dev = ep->dev; + if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + max = usb_endpoint_maxp(desc); + + spin_lock_irqsave(&dev->lock, flags); + _ep->maxpacket = max; + ep->desc = desc; + + /* net2272_ep_reset() has already been called */ + ep->stopped = 0; + ep->wedged = 0; + + /* set speed-dependent max packet */ + net2272_ep_write(ep, EP_MAXPKT0, max & 0xff); + net2272_ep_write(ep, EP_MAXPKT1, (max & 0xff00) >> 8); + + /* set type, direction, address; reset fifo counters */ + net2272_ep_write(ep, EP_STAT1, 1 << BUFFER_FLUSH); + tmp = usb_endpoint_type(desc); + if (usb_endpoint_xfer_bulk(desc)) { + /* catch some particularly blatant driver bugs */ + if ((dev->gadget.speed == USB_SPEED_HIGH && max != 512) || + (dev->gadget.speed == USB_SPEED_FULL && max > 64)) { + spin_unlock_irqrestore(&dev->lock, flags); + return -ERANGE; + } + } + ep->is_iso = usb_endpoint_xfer_isoc(desc) ? 1 : 0; + tmp <<= ENDPOINT_TYPE; + tmp |= ((desc->bEndpointAddress & 0x0f) << ENDPOINT_NUMBER); + tmp |= usb_endpoint_dir_in(desc) << ENDPOINT_DIRECTION; + tmp |= (1 << ENDPOINT_ENABLE); + + /* for OUT transfers, block the rx fifo until a read is posted */ + ep->is_in = usb_endpoint_dir_in(desc); + if (!ep->is_in) + net2272_ep_write(ep, EP_RSPSET, 1 << ALT_NAK_OUT_PACKETS); + + net2272_ep_write(ep, EP_CFG, tmp); + + /* enable irqs */ + tmp = (1 << ep->num) | net2272_read(dev, IRQENB0); + net2272_write(dev, IRQENB0, tmp); + + tmp = (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE) + | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE) + | net2272_ep_read(ep, EP_IRQENB); + net2272_ep_write(ep, EP_IRQENB, tmp); + + tmp = desc->bEndpointAddress; + dev_dbg(dev->dev, "enabled %s (ep%d%s-%s) max %04x cfg %02x\n", + _ep->name, tmp & 0x0f, PIPEDIR(tmp), + type_string(desc->bmAttributes), max, + net2272_ep_read(ep, EP_CFG)); + + spin_unlock_irqrestore(&dev->lock, flags); + return 0; +} + +static void net2272_ep_reset(struct net2272_ep *ep) +{ + u8 tmp; + + ep->desc = NULL; + INIT_LIST_HEAD(&ep->queue); + + usb_ep_set_maxpacket_limit(&ep->ep, ~0); + ep->ep.ops = &net2272_ep_ops; + + /* disable irqs, endpoint */ + net2272_ep_write(ep, EP_IRQENB, 0); + + /* init to our chosen defaults, notably so that we NAK OUT + * packets until the driver queues a read. + */ + tmp = (1 << NAK_OUT_PACKETS_MODE) | (1 << ALT_NAK_OUT_PACKETS); + net2272_ep_write(ep, EP_RSPSET, tmp); + + tmp = (1 << INTERRUPT_MODE) | (1 << HIDE_STATUS_PHASE); + if (ep->num != 0) + tmp |= (1 << ENDPOINT_TOGGLE) | (1 << ENDPOINT_HALT); + + net2272_ep_write(ep, EP_RSPCLR, tmp); + + /* scrub most status bits, and flush any fifo state */ + net2272_ep_write(ep, EP_STAT0, + (1 << DATA_IN_TOKEN_INTERRUPT) + | (1 << DATA_OUT_TOKEN_INTERRUPT) + | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT) + | (1 << DATA_PACKET_RECEIVED_INTERRUPT) + | (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)); + + net2272_ep_write(ep, EP_STAT1, + (1 << TIMEOUT) + | (1 << USB_OUT_ACK_SENT) + | (1 << USB_OUT_NAK_SENT) + | (1 << USB_IN_ACK_RCVD) + | (1 << USB_IN_NAK_SENT) + | (1 << USB_STALL_SENT) + | (1 << LOCAL_OUT_ZLP) + | (1 << BUFFER_FLUSH)); + + /* fifo size is handled separately */ +} + +static int net2272_disable(struct usb_ep *_ep) +{ + struct net2272_ep *ep; + unsigned long flags; + + ep = container_of(_ep, struct net2272_ep, ep); + if (!_ep || !ep->desc || _ep->name == ep0name) + return -EINVAL; + + spin_lock_irqsave(&ep->dev->lock, flags); + net2272_dequeue_all(ep); + net2272_ep_reset(ep); + + dev_vdbg(ep->dev->dev, "disabled %s\n", _ep->name); + + spin_unlock_irqrestore(&ep->dev->lock, flags); + return 0; +} + +/*---------------------------------------------------------------------------*/ + +static struct usb_request * +net2272_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) +{ + struct net2272_request *req; + + if (!_ep) + return NULL; + + req = kzalloc(sizeof(*req), gfp_flags); + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->queue); + + return &req->req; +} + +static void +net2272_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct net2272_request *req; + + if (!_ep || !_req) + return; + + req = container_of(_req, struct net2272_request, req); + WARN_ON(!list_empty(&req->queue)); + kfree(req); +} + +static void +net2272_done(struct net2272_ep *ep, struct net2272_request *req, int status) +{ + struct net2272 *dev; + unsigned stopped = ep->stopped; + + if (ep->num == 0) { + if (ep->dev->protocol_stall) { + ep->stopped = 1; + set_halt(ep); + } + allow_status(ep); + } + + list_del_init(&req->queue); + + if (req->req.status == -EINPROGRESS) + req->req.status = status; + else + status = req->req.status; + + dev = ep->dev; + if (use_dma && ep->dma) + usb_gadget_unmap_request(&dev->gadget, &req->req, + ep->is_in); + + if (status && status != -ESHUTDOWN) + dev_vdbg(dev->dev, "complete %s req %p stat %d len %u/%u buf %p\n", + ep->ep.name, &req->req, status, + req->req.actual, req->req.length, req->req.buf); + + /* don't modify queue heads during completion callback */ + ep->stopped = 1; + spin_unlock(&dev->lock); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&dev->lock); + ep->stopped = stopped; +} + +static int +net2272_write_packet(struct net2272_ep *ep, u8 *buf, + struct net2272_request *req, unsigned max) +{ + u16 __iomem *ep_data = net2272_reg_addr(ep->dev, EP_DATA); + u16 *bufp; + unsigned length, count; + u8 tmp; + + length = min(req->req.length - req->req.actual, max); + req->req.actual += length; + + dev_vdbg(ep->dev->dev, "write packet %s req %p max %u len %u avail %u\n", + ep->ep.name, req, max, length, + (net2272_ep_read(ep, EP_AVAIL1) << 8) | net2272_ep_read(ep, EP_AVAIL0)); + + count = length; + bufp = (u16 *)buf; + + while (likely(count >= 2)) { + /* no byte-swap required; chip endian set during init */ + writew(*bufp++, ep_data); + count -= 2; + } + buf = (u8 *)bufp; + + /* write final byte by placing the NET2272 into 8-bit mode */ + if (unlikely(count)) { + tmp = net2272_read(ep->dev, LOCCTL); + net2272_write(ep->dev, LOCCTL, tmp & ~(1 << DATA_WIDTH)); + writeb(*buf, ep_data); + net2272_write(ep->dev, LOCCTL, tmp); + } + return length; +} + +/* returns: 0: still running, 1: completed, negative: errno */ +static int +net2272_write_fifo(struct net2272_ep *ep, struct net2272_request *req) +{ + u8 *buf; + unsigned count, max; + int status; + + dev_vdbg(ep->dev->dev, "write_fifo %s actual %d len %d\n", + ep->ep.name, req->req.actual, req->req.length); + + /* + * Keep loading the endpoint until the final packet is loaded, + * or the endpoint buffer is full. + */ + top: + /* + * Clear interrupt status + * - Packet Transmitted interrupt will become set again when the + * host successfully takes another packet + */ + net2272_ep_write(ep, EP_STAT0, (1 << DATA_PACKET_TRANSMITTED_INTERRUPT)); + while (!(net2272_ep_read(ep, EP_STAT0) & (1 << BUFFER_FULL))) { + buf = req->req.buf + req->req.actual; + prefetch(buf); + + /* force pagesel */ + net2272_ep_read(ep, EP_STAT0); + + max = (net2272_ep_read(ep, EP_AVAIL1) << 8) | + (net2272_ep_read(ep, EP_AVAIL0)); + + if (max < ep->ep.maxpacket) + max = (net2272_ep_read(ep, EP_AVAIL1) << 8) + | (net2272_ep_read(ep, EP_AVAIL0)); + + count = net2272_write_packet(ep, buf, req, max); + /* see if we are done */ + if (req->req.length == req->req.actual) { + /* validate short or zlp packet */ + if (count < ep->ep.maxpacket) + set_fifo_bytecount(ep, 0); + net2272_done(ep, req, 0); + + if (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, + struct net2272_request, + queue); + status = net2272_kick_dma(ep, req); + + if (status < 0) + if ((net2272_ep_read(ep, EP_STAT0) + & (1 << BUFFER_EMPTY))) + goto top; + } + return 1; + } + net2272_ep_write(ep, EP_STAT0, (1 << DATA_PACKET_TRANSMITTED_INTERRUPT)); + } + return 0; +} + +static void +net2272_out_flush(struct net2272_ep *ep) +{ + ASSERT_OUT_NAKING(ep); + + net2272_ep_write(ep, EP_STAT0, (1 << DATA_OUT_TOKEN_INTERRUPT) + | (1 << DATA_PACKET_RECEIVED_INTERRUPT)); + net2272_ep_write(ep, EP_STAT1, 1 << BUFFER_FLUSH); +} + +static int +net2272_read_packet(struct net2272_ep *ep, u8 *buf, + struct net2272_request *req, unsigned avail) +{ + u16 __iomem *ep_data = net2272_reg_addr(ep->dev, EP_DATA); + unsigned is_short; + u16 *bufp; + + req->req.actual += avail; + + dev_vdbg(ep->dev->dev, "read packet %s req %p len %u avail %u\n", + ep->ep.name, req, avail, + (net2272_ep_read(ep, EP_AVAIL1) << 8) | net2272_ep_read(ep, EP_AVAIL0)); + + is_short = (avail < ep->ep.maxpacket); + + if (unlikely(avail == 0)) { + /* remove any zlp from the buffer */ + (void)readw(ep_data); + return is_short; + } + + /* Ensure we get the final byte */ + if (unlikely(avail % 2)) + avail++; + bufp = (u16 *)buf; + + do { + *bufp++ = readw(ep_data); + avail -= 2; + } while (avail); + + /* + * To avoid false endpoint available race condition must read + * ep stat0 twice in the case of a short transfer + */ + if (net2272_ep_read(ep, EP_STAT0) & (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)) + net2272_ep_read(ep, EP_STAT0); + + return is_short; +} + +static int +net2272_read_fifo(struct net2272_ep *ep, struct net2272_request *req) +{ + u8 *buf; + unsigned is_short; + int count; + int tmp; + int cleanup = 0; + + dev_vdbg(ep->dev->dev, "read_fifo %s actual %d len %d\n", + ep->ep.name, req->req.actual, req->req.length); + + top: + do { + buf = req->req.buf + req->req.actual; + prefetchw(buf); + + count = (net2272_ep_read(ep, EP_AVAIL1) << 8) + | net2272_ep_read(ep, EP_AVAIL0); + + net2272_ep_write(ep, EP_STAT0, + (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT) | + (1 << DATA_PACKET_RECEIVED_INTERRUPT)); + + tmp = req->req.length - req->req.actual; + + if (count > tmp) { + if ((tmp % ep->ep.maxpacket) != 0) { + dev_err(ep->dev->dev, + "%s out fifo %d bytes, expected %d\n", + ep->ep.name, count, tmp); + cleanup = 1; + } + count = (tmp > 0) ? tmp : 0; + } + + is_short = net2272_read_packet(ep, buf, req, count); + + /* completion */ + if (unlikely(cleanup || is_short || + req->req.actual == req->req.length)) { + + if (cleanup) { + net2272_out_flush(ep); + net2272_done(ep, req, -EOVERFLOW); + } else + net2272_done(ep, req, 0); + + /* re-initialize endpoint transfer registers + * otherwise they may result in erroneous pre-validation + * for subsequent control reads + */ + if (unlikely(ep->num == 0)) { + net2272_ep_write(ep, EP_TRANSFER2, 0); + net2272_ep_write(ep, EP_TRANSFER1, 0); + net2272_ep_write(ep, EP_TRANSFER0, 0); + } + + if (!list_empty(&ep->queue)) { + int status; + + req = list_entry(ep->queue.next, + struct net2272_request, queue); + status = net2272_kick_dma(ep, req); + if ((status < 0) && + !(net2272_ep_read(ep, EP_STAT0) & (1 << BUFFER_EMPTY))) + goto top; + } + return 1; + } + } while (!(net2272_ep_read(ep, EP_STAT0) & (1 << BUFFER_EMPTY))); + + return 0; +} + +static void +net2272_pio_advance(struct net2272_ep *ep) +{ + struct net2272_request *req; + + if (unlikely(list_empty(&ep->queue))) + return; + + req = list_entry(ep->queue.next, struct net2272_request, queue); + (ep->is_in ? net2272_write_fifo : net2272_read_fifo)(ep, req); +} + +/* returns 0 on success, else negative errno */ +static int +net2272_request_dma(struct net2272 *dev, unsigned ep, u32 buf, + unsigned len, unsigned dir) +{ + dev_vdbg(dev->dev, "request_dma ep %d buf %08x len %d dir %d\n", + ep, buf, len, dir); + + /* The NET2272 only supports a single dma channel */ + if (dev->dma_busy) + return -EBUSY; + /* + * EP_TRANSFER (used to determine the number of bytes received + * in an OUT transfer) is 24 bits wide; don't ask for more than that. + */ + if ((dir == 1) && (len > 0x1000000)) + return -EINVAL; + + dev->dma_busy = 1; + + /* initialize platform's dma */ +#ifdef CONFIG_USB_PCI + /* NET2272 addr, buffer addr, length, etc. */ + switch (dev->dev_id) { + case PCI_DEVICE_ID_RDK1: + /* Setup PLX 9054 DMA mode */ + writel((1 << LOCAL_BUS_WIDTH) | + (1 << TA_READY_INPUT_ENABLE) | + (0 << LOCAL_BURST_ENABLE) | + (1 << DONE_INTERRUPT_ENABLE) | + (1 << LOCAL_ADDRESSING_MODE) | + (1 << DEMAND_MODE) | + (1 << DMA_EOT_ENABLE) | + (1 << FAST_SLOW_TERMINATE_MODE_SELECT) | + (1 << DMA_CHANNEL_INTERRUPT_SELECT), + dev->rdk1.plx9054_base_addr + DMAMODE0); + + writel(0x100000, dev->rdk1.plx9054_base_addr + DMALADR0); + writel(buf, dev->rdk1.plx9054_base_addr + DMAPADR0); + writel(len, dev->rdk1.plx9054_base_addr + DMASIZ0); + writel((dir << DIRECTION_OF_TRANSFER) | + (1 << INTERRUPT_AFTER_TERMINAL_COUNT), + dev->rdk1.plx9054_base_addr + DMADPR0); + writel((1 << LOCAL_DMA_CHANNEL_0_INTERRUPT_ENABLE) | + readl(dev->rdk1.plx9054_base_addr + INTCSR), + dev->rdk1.plx9054_base_addr + INTCSR); + + break; + } +#endif + + net2272_write(dev, DMAREQ, + (0 << DMA_BUFFER_VALID) | + (1 << DMA_REQUEST_ENABLE) | + (1 << DMA_CONTROL_DACK) | + (dev->dma_eot_polarity << EOT_POLARITY) | + (dev->dma_dack_polarity << DACK_POLARITY) | + (dev->dma_dreq_polarity << DREQ_POLARITY) | + ((ep >> 1) << DMA_ENDPOINT_SELECT)); + + (void) net2272_read(dev, SCRATCH); + + return 0; +} + +static void +net2272_start_dma(struct net2272 *dev) +{ + /* start platform's dma controller */ +#ifdef CONFIG_USB_PCI + switch (dev->dev_id) { + case PCI_DEVICE_ID_RDK1: + writeb((1 << CHANNEL_ENABLE) | (1 << CHANNEL_START), + dev->rdk1.plx9054_base_addr + DMACSR0); + break; + } +#endif +} + +/* returns 0 on success, else negative errno */ +static int +net2272_kick_dma(struct net2272_ep *ep, struct net2272_request *req) +{ + unsigned size; + u8 tmp; + + if (!use_dma || (ep->num < 1) || (ep->num > 2) || !ep->dma) + return -EINVAL; + + /* don't use dma for odd-length transfers + * otherwise, we'd need to deal with the last byte with pio + */ + if (req->req.length & 1) + return -EINVAL; + + dev_vdbg(ep->dev->dev, "kick_dma %s req %p dma %08llx\n", + ep->ep.name, req, (unsigned long long) req->req.dma); + + net2272_ep_write(ep, EP_RSPSET, 1 << ALT_NAK_OUT_PACKETS); + + /* The NET2272 can only use DMA on one endpoint at a time */ + if (ep->dev->dma_busy) + return -EBUSY; + + /* Make sure we only DMA an even number of bytes (we'll use + * pio to complete the transfer) + */ + size = req->req.length; + size &= ~1; + + /* device-to-host transfer */ + if (ep->is_in) { + /* initialize platform's dma controller */ + if (net2272_request_dma(ep->dev, ep->num, req->req.dma, size, 0)) + /* unable to obtain DMA channel; return error and use pio mode */ + return -EBUSY; + req->req.actual += size; + + /* host-to-device transfer */ + } else { + tmp = net2272_ep_read(ep, EP_STAT0); + + /* initialize platform's dma controller */ + if (net2272_request_dma(ep->dev, ep->num, req->req.dma, size, 1)) + /* unable to obtain DMA channel; return error and use pio mode */ + return -EBUSY; + + if (!(tmp & (1 << BUFFER_EMPTY))) + ep->not_empty = 1; + else + ep->not_empty = 0; + + + /* allow the endpoint's buffer to fill */ + net2272_ep_write(ep, EP_RSPCLR, 1 << ALT_NAK_OUT_PACKETS); + + /* this transfer completed and data's already in the fifo + * return error so pio gets used. + */ + if (tmp & (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)) { + + /* deassert dreq */ + net2272_write(ep->dev, DMAREQ, + (0 << DMA_BUFFER_VALID) | + (0 << DMA_REQUEST_ENABLE) | + (1 << DMA_CONTROL_DACK) | + (ep->dev->dma_eot_polarity << EOT_POLARITY) | + (ep->dev->dma_dack_polarity << DACK_POLARITY) | + (ep->dev->dma_dreq_polarity << DREQ_POLARITY) | + ((ep->num >> 1) << DMA_ENDPOINT_SELECT)); + + return -EBUSY; + } + } + + /* Don't use per-packet interrupts: use dma interrupts only */ + net2272_ep_write(ep, EP_IRQENB, 0); + + net2272_start_dma(ep->dev); + + return 0; +} + +static void net2272_cancel_dma(struct net2272 *dev) +{ +#ifdef CONFIG_USB_PCI + switch (dev->dev_id) { + case PCI_DEVICE_ID_RDK1: + writeb(0, dev->rdk1.plx9054_base_addr + DMACSR0); + writeb(1 << CHANNEL_ABORT, dev->rdk1.plx9054_base_addr + DMACSR0); + while (!(readb(dev->rdk1.plx9054_base_addr + DMACSR0) & + (1 << CHANNEL_DONE))) + continue; /* wait for dma to stabalize */ + + /* dma abort generates an interrupt */ + writeb(1 << CHANNEL_CLEAR_INTERRUPT, + dev->rdk1.plx9054_base_addr + DMACSR0); + break; + } +#endif + + dev->dma_busy = 0; +} + +/*---------------------------------------------------------------------------*/ + +static int +net2272_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) +{ + struct net2272_request *req; + struct net2272_ep *ep; + struct net2272 *dev; + unsigned long flags; + int status = -1; + u8 s; + + req = container_of(_req, struct net2272_request, req); + if (!_req || !_req->complete || !_req->buf + || !list_empty(&req->queue)) + return -EINVAL; + ep = container_of(_ep, struct net2272_ep, ep); + if (!_ep || (!ep->desc && ep->num != 0)) + return -EINVAL; + dev = ep->dev; + if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + /* set up dma mapping in case the caller didn't */ + if (use_dma && ep->dma) { + status = usb_gadget_map_request(&dev->gadget, _req, + ep->is_in); + if (status) + return status; + } + + dev_vdbg(dev->dev, "%s queue req %p, len %d buf %p dma %08llx %s\n", + _ep->name, _req, _req->length, _req->buf, + (unsigned long long) _req->dma, _req->zero ? "zero" : "!zero"); + + spin_lock_irqsave(&dev->lock, flags); + + _req->status = -EINPROGRESS; + _req->actual = 0; + + /* kickstart this i/o queue? */ + if (list_empty(&ep->queue) && !ep->stopped) { + /* maybe there's no control data, just status ack */ + if (ep->num == 0 && _req->length == 0) { + net2272_done(ep, req, 0); + dev_vdbg(dev->dev, "%s status ack\n", ep->ep.name); + goto done; + } + + /* Return zlp, don't let it block subsequent packets */ + s = net2272_ep_read(ep, EP_STAT0); + if (s & (1 << BUFFER_EMPTY)) { + /* Buffer is empty check for a blocking zlp, handle it */ + if ((s & (1 << NAK_OUT_PACKETS)) && + net2272_ep_read(ep, EP_STAT1) & (1 << LOCAL_OUT_ZLP)) { + dev_dbg(dev->dev, "WARNING: returning ZLP short packet termination!\n"); + /* + * Request is going to terminate with a short packet ... + * hope the client is ready for it! + */ + status = net2272_read_fifo(ep, req); + /* clear short packet naking */ + net2272_ep_write(ep, EP_STAT0, (1 << NAK_OUT_PACKETS)); + goto done; + } + } + + /* try dma first */ + status = net2272_kick_dma(ep, req); + + if (status < 0) { + /* dma failed (most likely in use by another endpoint) + * fallback to pio + */ + status = 0; + + if (ep->is_in) + status = net2272_write_fifo(ep, req); + else { + s = net2272_ep_read(ep, EP_STAT0); + if ((s & (1 << BUFFER_EMPTY)) == 0) + status = net2272_read_fifo(ep, req); + } + + if (unlikely(status != 0)) { + if (status > 0) + status = 0; + req = NULL; + } + } + } + if (likely(req)) + list_add_tail(&req->queue, &ep->queue); + + if (likely(!list_empty(&ep->queue))) + net2272_ep_write(ep, EP_RSPCLR, 1 << ALT_NAK_OUT_PACKETS); + done: + spin_unlock_irqrestore(&dev->lock, flags); + + return 0; +} + +/* dequeue ALL requests */ +static void +net2272_dequeue_all(struct net2272_ep *ep) +{ + struct net2272_request *req; + + /* called with spinlock held */ + ep->stopped = 1; + + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, + struct net2272_request, + queue); + net2272_done(ep, req, -ESHUTDOWN); + } +} + +/* dequeue JUST ONE request */ +static int +net2272_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct net2272_ep *ep; + struct net2272_request *req = NULL, *iter; + unsigned long flags; + int stopped; + + ep = container_of(_ep, struct net2272_ep, ep); + if (!_ep || (!ep->desc && ep->num != 0) || !_req) + return -EINVAL; + + spin_lock_irqsave(&ep->dev->lock, flags); + stopped = ep->stopped; + ep->stopped = 1; + + /* make sure it's still queued on this endpoint */ + list_for_each_entry(iter, &ep->queue, queue) { + if (&iter->req != _req) + continue; + req = iter; + break; + } + if (!req) { + ep->stopped = stopped; + spin_unlock_irqrestore(&ep->dev->lock, flags); + return -EINVAL; + } + + /* queue head may be partially complete */ + if (ep->queue.next == &req->queue) { + dev_dbg(ep->dev->dev, "unlink (%s) pio\n", _ep->name); + net2272_done(ep, req, -ECONNRESET); + } + ep->stopped = stopped; + + spin_unlock_irqrestore(&ep->dev->lock, flags); + return 0; +} + +/*---------------------------------------------------------------------------*/ + +static int +net2272_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged) +{ + struct net2272_ep *ep; + unsigned long flags; + int ret = 0; + + ep = container_of(_ep, struct net2272_ep, ep); + if (!_ep || (!ep->desc && ep->num != 0)) + return -EINVAL; + if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + if (ep->desc /* not ep0 */ && usb_endpoint_xfer_isoc(ep->desc)) + return -EINVAL; + + spin_lock_irqsave(&ep->dev->lock, flags); + if (!list_empty(&ep->queue)) + ret = -EAGAIN; + else if (ep->is_in && value && net2272_fifo_status(_ep) != 0) + ret = -EAGAIN; + else { + dev_vdbg(ep->dev->dev, "%s %s %s\n", _ep->name, + value ? "set" : "clear", + wedged ? "wedge" : "halt"); + /* set/clear */ + if (value) { + if (ep->num == 0) + ep->dev->protocol_stall = 1; + else + set_halt(ep); + if (wedged) + ep->wedged = 1; + } else { + clear_halt(ep); + ep->wedged = 0; + } + } + spin_unlock_irqrestore(&ep->dev->lock, flags); + + return ret; +} + +static int +net2272_set_halt(struct usb_ep *_ep, int value) +{ + return net2272_set_halt_and_wedge(_ep, value, 0); +} + +static int +net2272_set_wedge(struct usb_ep *_ep) +{ + if (!_ep || _ep->name == ep0name) + return -EINVAL; + return net2272_set_halt_and_wedge(_ep, 1, 1); +} + +static int +net2272_fifo_status(struct usb_ep *_ep) +{ + struct net2272_ep *ep; + u16 avail; + + ep = container_of(_ep, struct net2272_ep, ep); + if (!_ep || (!ep->desc && ep->num != 0)) + return -ENODEV; + if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + avail = net2272_ep_read(ep, EP_AVAIL1) << 8; + avail |= net2272_ep_read(ep, EP_AVAIL0); + if (avail > ep->fifo_size) + return -EOVERFLOW; + if (ep->is_in) + avail = ep->fifo_size - avail; + return avail; +} + +static void +net2272_fifo_flush(struct usb_ep *_ep) +{ + struct net2272_ep *ep; + + ep = container_of(_ep, struct net2272_ep, ep); + if (!_ep || (!ep->desc && ep->num != 0)) + return; + if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) + return; + + net2272_ep_write(ep, EP_STAT1, 1 << BUFFER_FLUSH); +} + +static const struct usb_ep_ops net2272_ep_ops = { + .enable = net2272_enable, + .disable = net2272_disable, + + .alloc_request = net2272_alloc_request, + .free_request = net2272_free_request, + + .queue = net2272_queue, + .dequeue = net2272_dequeue, + + .set_halt = net2272_set_halt, + .set_wedge = net2272_set_wedge, + .fifo_status = net2272_fifo_status, + .fifo_flush = net2272_fifo_flush, +}; + +/*---------------------------------------------------------------------------*/ + +static int +net2272_get_frame(struct usb_gadget *_gadget) +{ + struct net2272 *dev; + unsigned long flags; + u16 ret; + + if (!_gadget) + return -ENODEV; + dev = container_of(_gadget, struct net2272, gadget); + spin_lock_irqsave(&dev->lock, flags); + + ret = net2272_read(dev, FRAME1) << 8; + ret |= net2272_read(dev, FRAME0); + + spin_unlock_irqrestore(&dev->lock, flags); + return ret; +} + +static int +net2272_wakeup(struct usb_gadget *_gadget) +{ + struct net2272 *dev; + u8 tmp; + unsigned long flags; + + if (!_gadget) + return 0; + dev = container_of(_gadget, struct net2272, gadget); + + spin_lock_irqsave(&dev->lock, flags); + tmp = net2272_read(dev, USBCTL0); + if (tmp & (1 << IO_WAKEUP_ENABLE)) + net2272_write(dev, USBCTL1, (1 << GENERATE_RESUME)); + + spin_unlock_irqrestore(&dev->lock, flags); + + return 0; +} + +static int +net2272_set_selfpowered(struct usb_gadget *_gadget, int value) +{ + if (!_gadget) + return -ENODEV; + + _gadget->is_selfpowered = (value != 0); + + return 0; +} + +static int +net2272_pullup(struct usb_gadget *_gadget, int is_on) +{ + struct net2272 *dev; + u8 tmp; + unsigned long flags; + + if (!_gadget) + return -ENODEV; + dev = container_of(_gadget, struct net2272, gadget); + + spin_lock_irqsave(&dev->lock, flags); + tmp = net2272_read(dev, USBCTL0); + dev->softconnect = (is_on != 0); + if (is_on) + tmp |= (1 << USB_DETECT_ENABLE); + else + tmp &= ~(1 << USB_DETECT_ENABLE); + net2272_write(dev, USBCTL0, tmp); + spin_unlock_irqrestore(&dev->lock, flags); + + return 0; +} + +static int net2272_start(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver); +static int net2272_stop(struct usb_gadget *_gadget); +static void net2272_async_callbacks(struct usb_gadget *_gadget, bool enable); + +static const struct usb_gadget_ops net2272_ops = { + .get_frame = net2272_get_frame, + .wakeup = net2272_wakeup, + .set_selfpowered = net2272_set_selfpowered, + .pullup = net2272_pullup, + .udc_start = net2272_start, + .udc_stop = net2272_stop, + .udc_async_callbacks = net2272_async_callbacks, +}; + +/*---------------------------------------------------------------------------*/ + +static ssize_t +registers_show(struct device *_dev, struct device_attribute *attr, char *buf) +{ + struct net2272 *dev; + char *next; + unsigned size, t; + unsigned long flags; + u8 t1, t2; + int i; + const char *s; + + dev = dev_get_drvdata(_dev); + next = buf; + size = PAGE_SIZE; + spin_lock_irqsave(&dev->lock, flags); + + /* Main Control Registers */ + t = scnprintf(next, size, "%s version %s," + "chiprev %02x, locctl %02x\n" + "irqenb0 %02x irqenb1 %02x " + "irqstat0 %02x irqstat1 %02x\n", + driver_name, driver_vers, dev->chiprev, + net2272_read(dev, LOCCTL), + net2272_read(dev, IRQENB0), + net2272_read(dev, IRQENB1), + net2272_read(dev, IRQSTAT0), + net2272_read(dev, IRQSTAT1)); + size -= t; + next += t; + + /* DMA */ + t1 = net2272_read(dev, DMAREQ); + t = scnprintf(next, size, "\ndmareq %02x: %s %s%s%s%s\n", + t1, ep_name[(t1 & 0x01) + 1], + t1 & (1 << DMA_CONTROL_DACK) ? "dack " : "", + t1 & (1 << DMA_REQUEST_ENABLE) ? "reqenb " : "", + t1 & (1 << DMA_REQUEST) ? "req " : "", + t1 & (1 << DMA_BUFFER_VALID) ? "valid " : ""); + size -= t; + next += t; + + /* USB Control Registers */ + t1 = net2272_read(dev, USBCTL1); + if (t1 & (1 << VBUS_PIN)) { + if (t1 & (1 << USB_HIGH_SPEED)) + s = "high speed"; + else if (dev->gadget.speed == USB_SPEED_UNKNOWN) + s = "powered"; + else + s = "full speed"; + } else + s = "not attached"; + t = scnprintf(next, size, + "usbctl0 %02x usbctl1 %02x addr 0x%02x (%s)\n", + net2272_read(dev, USBCTL0), t1, + net2272_read(dev, OURADDR), s); + size -= t; + next += t; + + /* Endpoint Registers */ + for (i = 0; i < 4; ++i) { + struct net2272_ep *ep; + + ep = &dev->ep[i]; + if (i && !ep->desc) + continue; + + t1 = net2272_ep_read(ep, EP_CFG); + t2 = net2272_ep_read(ep, EP_RSPSET); + t = scnprintf(next, size, + "\n%s\tcfg %02x rsp (%02x) %s%s%s%s%s%s%s%s" + "irqenb %02x\n", + ep->ep.name, t1, t2, + (t2 & (1 << ALT_NAK_OUT_PACKETS)) ? "NAK " : "", + (t2 & (1 << HIDE_STATUS_PHASE)) ? "hide " : "", + (t2 & (1 << AUTOVALIDATE)) ? "auto " : "", + (t2 & (1 << INTERRUPT_MODE)) ? "interrupt " : "", + (t2 & (1 << CONTROL_STATUS_PHASE_HANDSHAKE)) ? "status " : "", + (t2 & (1 << NAK_OUT_PACKETS_MODE)) ? "NAKmode " : "", + (t2 & (1 << ENDPOINT_TOGGLE)) ? "DATA1 " : "DATA0 ", + (t2 & (1 << ENDPOINT_HALT)) ? "HALT " : "", + net2272_ep_read(ep, EP_IRQENB)); + size -= t; + next += t; + + t = scnprintf(next, size, + "\tstat0 %02x stat1 %02x avail %04x " + "(ep%d%s-%s)%s\n", + net2272_ep_read(ep, EP_STAT0), + net2272_ep_read(ep, EP_STAT1), + (net2272_ep_read(ep, EP_AVAIL1) << 8) | net2272_ep_read(ep, EP_AVAIL0), + t1 & 0x0f, + ep->is_in ? "in" : "out", + type_string(t1 >> 5), + ep->stopped ? "*" : ""); + size -= t; + next += t; + + t = scnprintf(next, size, + "\tep_transfer %06x\n", + ((net2272_ep_read(ep, EP_TRANSFER2) & 0xff) << 16) | + ((net2272_ep_read(ep, EP_TRANSFER1) & 0xff) << 8) | + ((net2272_ep_read(ep, EP_TRANSFER0) & 0xff))); + size -= t; + next += t; + + t1 = net2272_ep_read(ep, EP_BUFF_STATES) & 0x03; + t2 = (net2272_ep_read(ep, EP_BUFF_STATES) >> 2) & 0x03; + t = scnprintf(next, size, + "\tbuf-a %s buf-b %s\n", + buf_state_string(t1), + buf_state_string(t2)); + size -= t; + next += t; + } + + spin_unlock_irqrestore(&dev->lock, flags); + + return PAGE_SIZE - size; +} +static DEVICE_ATTR_RO(registers); + +/*---------------------------------------------------------------------------*/ + +static void +net2272_set_fifo_mode(struct net2272 *dev, int mode) +{ + u8 tmp; + + tmp = net2272_read(dev, LOCCTL) & 0x3f; + tmp |= (mode << 6); + net2272_write(dev, LOCCTL, tmp); + + INIT_LIST_HEAD(&dev->gadget.ep_list); + + /* always ep-a, ep-c ... maybe not ep-b */ + list_add_tail(&dev->ep[1].ep.ep_list, &dev->gadget.ep_list); + + switch (mode) { + case 0: + list_add_tail(&dev->ep[2].ep.ep_list, &dev->gadget.ep_list); + dev->ep[1].fifo_size = dev->ep[2].fifo_size = 512; + break; + case 1: + list_add_tail(&dev->ep[2].ep.ep_list, &dev->gadget.ep_list); + dev->ep[1].fifo_size = 1024; + dev->ep[2].fifo_size = 512; + break; + case 2: + list_add_tail(&dev->ep[2].ep.ep_list, &dev->gadget.ep_list); + dev->ep[1].fifo_size = dev->ep[2].fifo_size = 1024; + break; + case 3: + dev->ep[1].fifo_size = 1024; + break; + } + + /* ep-c is always 2 512 byte buffers */ + list_add_tail(&dev->ep[3].ep.ep_list, &dev->gadget.ep_list); + dev->ep[3].fifo_size = 512; +} + +/*---------------------------------------------------------------------------*/ + +static void +net2272_usb_reset(struct net2272 *dev) +{ + dev->gadget.speed = USB_SPEED_UNKNOWN; + + net2272_cancel_dma(dev); + + net2272_write(dev, IRQENB0, 0); + net2272_write(dev, IRQENB1, 0); + + /* clear irq state */ + net2272_write(dev, IRQSTAT0, 0xff); + net2272_write(dev, IRQSTAT1, ~(1 << SUSPEND_REQUEST_INTERRUPT)); + + net2272_write(dev, DMAREQ, + (0 << DMA_BUFFER_VALID) | + (0 << DMA_REQUEST_ENABLE) | + (1 << DMA_CONTROL_DACK) | + (dev->dma_eot_polarity << EOT_POLARITY) | + (dev->dma_dack_polarity << DACK_POLARITY) | + (dev->dma_dreq_polarity << DREQ_POLARITY) | + ((dma_ep >> 1) << DMA_ENDPOINT_SELECT)); + + net2272_cancel_dma(dev); + net2272_set_fifo_mode(dev, (fifo_mode <= 3) ? fifo_mode : 0); + + /* Set the NET2272 ep fifo data width to 16-bit mode and for correct byte swapping + * note that the higher level gadget drivers are expected to convert data to little endian. + * Enable byte swap for your local bus/cpu if needed by setting BYTE_SWAP in LOCCTL here + */ + net2272_write(dev, LOCCTL, net2272_read(dev, LOCCTL) | (1 << DATA_WIDTH)); + net2272_write(dev, LOCCTL1, (dma_mode << DMA_MODE)); +} + +static void +net2272_usb_reinit(struct net2272 *dev) +{ + int i; + + /* basic endpoint init */ + for (i = 0; i < 4; ++i) { + struct net2272_ep *ep = &dev->ep[i]; + + ep->ep.name = ep_name[i]; + ep->dev = dev; + ep->num = i; + ep->not_empty = 0; + + if (use_dma && ep->num == dma_ep) + ep->dma = 1; + + if (i > 0 && i <= 3) + ep->fifo_size = 512; + else + ep->fifo_size = 64; + net2272_ep_reset(ep); + + if (i == 0) { + ep->ep.caps.type_control = true; + } else { + ep->ep.caps.type_iso = true; + ep->ep.caps.type_bulk = true; + ep->ep.caps.type_int = true; + } + + ep->ep.caps.dir_in = true; + ep->ep.caps.dir_out = true; + } + usb_ep_set_maxpacket_limit(&dev->ep[0].ep, 64); + + dev->gadget.ep0 = &dev->ep[0].ep; + dev->ep[0].stopped = 0; + INIT_LIST_HEAD(&dev->gadget.ep0->ep_list); +} + +static void +net2272_ep0_start(struct net2272 *dev) +{ + struct net2272_ep *ep0 = &dev->ep[0]; + + net2272_ep_write(ep0, EP_RSPSET, + (1 << NAK_OUT_PACKETS_MODE) | + (1 << ALT_NAK_OUT_PACKETS)); + net2272_ep_write(ep0, EP_RSPCLR, + (1 << HIDE_STATUS_PHASE) | + (1 << CONTROL_STATUS_PHASE_HANDSHAKE)); + net2272_write(dev, USBCTL0, + (dev->softconnect << USB_DETECT_ENABLE) | + (1 << USB_ROOT_PORT_WAKEUP_ENABLE) | + (1 << IO_WAKEUP_ENABLE)); + net2272_write(dev, IRQENB0, + (1 << SETUP_PACKET_INTERRUPT_ENABLE) | + (1 << ENDPOINT_0_INTERRUPT_ENABLE) | + (1 << DMA_DONE_INTERRUPT_ENABLE)); + net2272_write(dev, IRQENB1, + (1 << VBUS_INTERRUPT_ENABLE) | + (1 << ROOT_PORT_RESET_INTERRUPT_ENABLE) | + (1 << SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE)); +} + +/* when a driver is successfully registered, it will receive + * control requests including set_configuration(), which enables + * non-control requests. then usb traffic follows until a + * disconnect is reported. then a host may connect again, or + * the driver might get unbound. + */ +static int net2272_start(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver) +{ + struct net2272 *dev; + unsigned i; + + if (!driver || !driver->setup || + driver->max_speed != USB_SPEED_HIGH) + return -EINVAL; + + dev = container_of(_gadget, struct net2272, gadget); + + for (i = 0; i < 4; ++i) + dev->ep[i].irqs = 0; + /* hook up the driver ... */ + dev->softconnect = 1; + dev->driver = driver; + + /* ... then enable host detection and ep0; and we're ready + * for set_configuration as well as eventual disconnect. + */ + net2272_ep0_start(dev); + + return 0; +} + +static void +stop_activity(struct net2272 *dev, struct usb_gadget_driver *driver) +{ + int i; + + /* don't disconnect if it's not connected */ + if (dev->gadget.speed == USB_SPEED_UNKNOWN) + driver = NULL; + + /* stop hardware; prevent new request submissions; + * and kill any outstanding requests. + */ + net2272_usb_reset(dev); + for (i = 0; i < 4; ++i) + net2272_dequeue_all(&dev->ep[i]); + + /* report disconnect; the driver is already quiesced */ + if (dev->async_callbacks && driver) { + spin_unlock(&dev->lock); + driver->disconnect(&dev->gadget); + spin_lock(&dev->lock); + } + + net2272_usb_reinit(dev); +} + +static int net2272_stop(struct usb_gadget *_gadget) +{ + struct net2272 *dev; + unsigned long flags; + + dev = container_of(_gadget, struct net2272, gadget); + + spin_lock_irqsave(&dev->lock, flags); + stop_activity(dev, NULL); + spin_unlock_irqrestore(&dev->lock, flags); + + dev->driver = NULL; + + return 0; +} + +static void net2272_async_callbacks(struct usb_gadget *_gadget, bool enable) +{ + struct net2272 *dev = container_of(_gadget, struct net2272, gadget); + + spin_lock_irq(&dev->lock); + dev->async_callbacks = enable; + spin_unlock_irq(&dev->lock); +} + +/*---------------------------------------------------------------------------*/ +/* handle ep-a/ep-b dma completions */ +static void +net2272_handle_dma(struct net2272_ep *ep) +{ + struct net2272_request *req; + unsigned len; + int status; + + if (!list_empty(&ep->queue)) + req = list_entry(ep->queue.next, + struct net2272_request, queue); + else + req = NULL; + + dev_vdbg(ep->dev->dev, "handle_dma %s req %p\n", ep->ep.name, req); + + /* Ensure DREQ is de-asserted */ + net2272_write(ep->dev, DMAREQ, + (0 << DMA_BUFFER_VALID) + | (0 << DMA_REQUEST_ENABLE) + | (1 << DMA_CONTROL_DACK) + | (ep->dev->dma_eot_polarity << EOT_POLARITY) + | (ep->dev->dma_dack_polarity << DACK_POLARITY) + | (ep->dev->dma_dreq_polarity << DREQ_POLARITY) + | (ep->dma << DMA_ENDPOINT_SELECT)); + + ep->dev->dma_busy = 0; + + net2272_ep_write(ep, EP_IRQENB, + (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE) + | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE) + | net2272_ep_read(ep, EP_IRQENB)); + + /* device-to-host transfer completed */ + if (ep->is_in) { + /* validate a short packet or zlp if necessary */ + if ((req->req.length % ep->ep.maxpacket != 0) || + req->req.zero) + set_fifo_bytecount(ep, 0); + + net2272_done(ep, req, 0); + if (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, + struct net2272_request, queue); + status = net2272_kick_dma(ep, req); + if (status < 0) + net2272_pio_advance(ep); + } + + /* host-to-device transfer completed */ + } else { + /* terminated with a short packet? */ + if (net2272_read(ep->dev, IRQSTAT0) & + (1 << DMA_DONE_INTERRUPT)) { + /* abort system dma */ + net2272_cancel_dma(ep->dev); + } + + /* EP_TRANSFER will contain the number of bytes + * actually received. + * NOTE: There is no overflow detection on EP_TRANSFER: + * We can't deal with transfers larger than 2^24 bytes! + */ + len = (net2272_ep_read(ep, EP_TRANSFER2) << 16) + | (net2272_ep_read(ep, EP_TRANSFER1) << 8) + | (net2272_ep_read(ep, EP_TRANSFER0)); + + if (ep->not_empty) + len += 4; + + req->req.actual += len; + + /* get any remaining data */ + net2272_pio_advance(ep); + } +} + +/*---------------------------------------------------------------------------*/ + +static void +net2272_handle_ep(struct net2272_ep *ep) +{ + struct net2272_request *req; + u8 stat0, stat1; + + if (!list_empty(&ep->queue)) + req = list_entry(ep->queue.next, + struct net2272_request, queue); + else + req = NULL; + + /* ack all, and handle what we care about */ + stat0 = net2272_ep_read(ep, EP_STAT0); + stat1 = net2272_ep_read(ep, EP_STAT1); + ep->irqs++; + + dev_vdbg(ep->dev->dev, "%s ack ep_stat0 %02x, ep_stat1 %02x, req %p\n", + ep->ep.name, stat0, stat1, req ? &req->req : NULL); + + net2272_ep_write(ep, EP_STAT0, stat0 & + ~((1 << NAK_OUT_PACKETS) + | (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT))); + net2272_ep_write(ep, EP_STAT1, stat1); + + /* data packet(s) received (in the fifo, OUT) + * direction must be validated, otherwise control read status phase + * could be interpreted as a valid packet + */ + if (!ep->is_in && (stat0 & (1 << DATA_PACKET_RECEIVED_INTERRUPT))) + net2272_pio_advance(ep); + /* data packet(s) transmitted (IN) */ + else if (stat0 & (1 << DATA_PACKET_TRANSMITTED_INTERRUPT)) + net2272_pio_advance(ep); +} + +static struct net2272_ep * +net2272_get_ep_by_addr(struct net2272 *dev, u16 wIndex) +{ + struct net2272_ep *ep; + + if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0) + return &dev->ep[0]; + + list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) { + u8 bEndpointAddress; + + if (!ep->desc) + continue; + bEndpointAddress = ep->desc->bEndpointAddress; + if ((wIndex ^ bEndpointAddress) & USB_DIR_IN) + continue; + if ((wIndex & 0x0f) == (bEndpointAddress & 0x0f)) + return ep; + } + return NULL; +} + +/* + * USB Test Packet: + * JKJKJKJK * 9 + * JJKKJJKK * 8 + * JJJJKKKK * 8 + * JJJJJJJKKKKKKK * 8 + * JJJJJJJK * 8 + * {JKKKKKKK * 10}, JK + */ +static const u8 net2272_test_packet[] = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, + 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, + 0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0x7F, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, + 0xFC, 0x7E, 0xBF, 0xDF, 0xEF, 0xF7, 0xFD, 0x7E +}; + +static void +net2272_set_test_mode(struct net2272 *dev, int mode) +{ + int i; + + /* Disable all net2272 interrupts: + * Nothing but a power cycle should stop the test. + */ + net2272_write(dev, IRQENB0, 0x00); + net2272_write(dev, IRQENB1, 0x00); + + /* Force tranceiver to high-speed */ + net2272_write(dev, XCVRDIAG, 1 << FORCE_HIGH_SPEED); + + net2272_write(dev, PAGESEL, 0); + net2272_write(dev, EP_STAT0, 1 << DATA_PACKET_TRANSMITTED_INTERRUPT); + net2272_write(dev, EP_RSPCLR, + (1 << CONTROL_STATUS_PHASE_HANDSHAKE) + | (1 << HIDE_STATUS_PHASE)); + net2272_write(dev, EP_CFG, 1 << ENDPOINT_DIRECTION); + net2272_write(dev, EP_STAT1, 1 << BUFFER_FLUSH); + + /* wait for status phase to complete */ + while (!(net2272_read(dev, EP_STAT0) & + (1 << DATA_PACKET_TRANSMITTED_INTERRUPT))) + ; + + /* Enable test mode */ + net2272_write(dev, USBTEST, mode); + + /* load test packet */ + if (mode == USB_TEST_PACKET) { + /* switch to 8 bit mode */ + net2272_write(dev, LOCCTL, net2272_read(dev, LOCCTL) & + ~(1 << DATA_WIDTH)); + + for (i = 0; i < sizeof(net2272_test_packet); ++i) + net2272_write(dev, EP_DATA, net2272_test_packet[i]); + + /* Validate test packet */ + net2272_write(dev, EP_TRANSFER0, 0); + } +} + +static void +net2272_handle_stat0_irqs(struct net2272 *dev, u8 stat) +{ + struct net2272_ep *ep; + u8 num, scratch; + + /* starting a control request? */ + if (unlikely(stat & (1 << SETUP_PACKET_INTERRUPT))) { + union { + u8 raw[8]; + struct usb_ctrlrequest r; + } u; + int tmp = 0; + struct net2272_request *req; + + if (dev->gadget.speed == USB_SPEED_UNKNOWN) { + if (net2272_read(dev, USBCTL1) & (1 << USB_HIGH_SPEED)) + dev->gadget.speed = USB_SPEED_HIGH; + else + dev->gadget.speed = USB_SPEED_FULL; + dev_dbg(dev->dev, "%s\n", + usb_speed_string(dev->gadget.speed)); + } + + ep = &dev->ep[0]; + ep->irqs++; + + /* make sure any leftover interrupt state is cleared */ + stat &= ~(1 << ENDPOINT_0_INTERRUPT); + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, + struct net2272_request, queue); + net2272_done(ep, req, + (req->req.actual == req->req.length) ? 0 : -EPROTO); + } + ep->stopped = 0; + dev->protocol_stall = 0; + net2272_ep_write(ep, EP_STAT0, + (1 << DATA_IN_TOKEN_INTERRUPT) + | (1 << DATA_OUT_TOKEN_INTERRUPT) + | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT) + | (1 << DATA_PACKET_RECEIVED_INTERRUPT) + | (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)); + net2272_ep_write(ep, EP_STAT1, + (1 << TIMEOUT) + | (1 << USB_OUT_ACK_SENT) + | (1 << USB_OUT_NAK_SENT) + | (1 << USB_IN_ACK_RCVD) + | (1 << USB_IN_NAK_SENT) + | (1 << USB_STALL_SENT) + | (1 << LOCAL_OUT_ZLP)); + + /* + * Ensure Control Read pre-validation setting is beyond maximum size + * - Control Writes can leave non-zero values in EP_TRANSFER. If + * an EP0 transfer following the Control Write is a Control Read, + * the NET2272 sees the non-zero EP_TRANSFER as an unexpected + * pre-validation count. + * - Setting EP_TRANSFER beyond the maximum EP0 transfer size ensures + * the pre-validation count cannot cause an unexpected validatation + */ + net2272_write(dev, PAGESEL, 0); + net2272_write(dev, EP_TRANSFER2, 0xff); + net2272_write(dev, EP_TRANSFER1, 0xff); + net2272_write(dev, EP_TRANSFER0, 0xff); + + u.raw[0] = net2272_read(dev, SETUP0); + u.raw[1] = net2272_read(dev, SETUP1); + u.raw[2] = net2272_read(dev, SETUP2); + u.raw[3] = net2272_read(dev, SETUP3); + u.raw[4] = net2272_read(dev, SETUP4); + u.raw[5] = net2272_read(dev, SETUP5); + u.raw[6] = net2272_read(dev, SETUP6); + u.raw[7] = net2272_read(dev, SETUP7); + /* + * If you have a big endian cpu make sure le16_to_cpus + * performs the proper byte swapping here... + */ + le16_to_cpus(&u.r.wValue); + le16_to_cpus(&u.r.wIndex); + le16_to_cpus(&u.r.wLength); + + /* ack the irq */ + net2272_write(dev, IRQSTAT0, 1 << SETUP_PACKET_INTERRUPT); + stat ^= (1 << SETUP_PACKET_INTERRUPT); + + /* watch control traffic at the token level, and force + * synchronization before letting the status phase happen. + */ + ep->is_in = (u.r.bRequestType & USB_DIR_IN) != 0; + if (ep->is_in) { + scratch = (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE) + | (1 << DATA_OUT_TOKEN_INTERRUPT_ENABLE) + | (1 << DATA_IN_TOKEN_INTERRUPT_ENABLE); + stop_out_naking(ep); + } else + scratch = (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE) + | (1 << DATA_OUT_TOKEN_INTERRUPT_ENABLE) + | (1 << DATA_IN_TOKEN_INTERRUPT_ENABLE); + net2272_ep_write(ep, EP_IRQENB, scratch); + + if ((u.r.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD) + goto delegate; + switch (u.r.bRequest) { + case USB_REQ_GET_STATUS: { + struct net2272_ep *e; + u16 status = 0; + + switch (u.r.bRequestType & USB_RECIP_MASK) { + case USB_RECIP_ENDPOINT: + e = net2272_get_ep_by_addr(dev, u.r.wIndex); + if (!e || u.r.wLength > 2) + goto do_stall; + if (net2272_ep_read(e, EP_RSPSET) & (1 << ENDPOINT_HALT)) + status = cpu_to_le16(1); + else + status = cpu_to_le16(0); + + /* don't bother with a request object! */ + net2272_ep_write(&dev->ep[0], EP_IRQENB, 0); + writew(status, net2272_reg_addr(dev, EP_DATA)); + set_fifo_bytecount(&dev->ep[0], 0); + allow_status(ep); + dev_vdbg(dev->dev, "%s stat %02x\n", + ep->ep.name, status); + goto next_endpoints; + case USB_RECIP_DEVICE: + if (u.r.wLength > 2) + goto do_stall; + if (dev->gadget.is_selfpowered) + status = (1 << USB_DEVICE_SELF_POWERED); + + /* don't bother with a request object! */ + net2272_ep_write(&dev->ep[0], EP_IRQENB, 0); + writew(status, net2272_reg_addr(dev, EP_DATA)); + set_fifo_bytecount(&dev->ep[0], 0); + allow_status(ep); + dev_vdbg(dev->dev, "device stat %02x\n", status); + goto next_endpoints; + case USB_RECIP_INTERFACE: + if (u.r.wLength > 2) + goto do_stall; + + /* don't bother with a request object! */ + net2272_ep_write(&dev->ep[0], EP_IRQENB, 0); + writew(status, net2272_reg_addr(dev, EP_DATA)); + set_fifo_bytecount(&dev->ep[0], 0); + allow_status(ep); + dev_vdbg(dev->dev, "interface status %02x\n", status); + goto next_endpoints; + } + + break; + } + case USB_REQ_CLEAR_FEATURE: { + struct net2272_ep *e; + + if (u.r.bRequestType != USB_RECIP_ENDPOINT) + goto delegate; + if (u.r.wValue != USB_ENDPOINT_HALT || + u.r.wLength != 0) + goto do_stall; + e = net2272_get_ep_by_addr(dev, u.r.wIndex); + if (!e) + goto do_stall; + if (e->wedged) { + dev_vdbg(dev->dev, "%s wedged, halt not cleared\n", + ep->ep.name); + } else { + dev_vdbg(dev->dev, "%s clear halt\n", ep->ep.name); + clear_halt(e); + } + allow_status(ep); + goto next_endpoints; + } + case USB_REQ_SET_FEATURE: { + struct net2272_ep *e; + + if (u.r.bRequestType == USB_RECIP_DEVICE) { + if (u.r.wIndex != NORMAL_OPERATION) + net2272_set_test_mode(dev, (u.r.wIndex >> 8)); + allow_status(ep); + dev_vdbg(dev->dev, "test mode: %d\n", u.r.wIndex); + goto next_endpoints; + } else if (u.r.bRequestType != USB_RECIP_ENDPOINT) + goto delegate; + if (u.r.wValue != USB_ENDPOINT_HALT || + u.r.wLength != 0) + goto do_stall; + e = net2272_get_ep_by_addr(dev, u.r.wIndex); + if (!e) + goto do_stall; + set_halt(e); + allow_status(ep); + dev_vdbg(dev->dev, "%s set halt\n", ep->ep.name); + goto next_endpoints; + } + case USB_REQ_SET_ADDRESS: { + net2272_write(dev, OURADDR, u.r.wValue & 0xff); + allow_status(ep); + break; + } + default: + delegate: + dev_vdbg(dev->dev, "setup %02x.%02x v%04x i%04x " + "ep_cfg %08x\n", + u.r.bRequestType, u.r.bRequest, + u.r.wValue, u.r.wIndex, + net2272_ep_read(ep, EP_CFG)); + if (dev->async_callbacks) { + spin_unlock(&dev->lock); + tmp = dev->driver->setup(&dev->gadget, &u.r); + spin_lock(&dev->lock); + } + } + + /* stall ep0 on error */ + if (tmp < 0) { + do_stall: + dev_vdbg(dev->dev, "req %02x.%02x protocol STALL; stat %d\n", + u.r.bRequestType, u.r.bRequest, tmp); + dev->protocol_stall = 1; + } + /* endpoint dma irq? */ + } else if (stat & (1 << DMA_DONE_INTERRUPT)) { + net2272_cancel_dma(dev); + net2272_write(dev, IRQSTAT0, 1 << DMA_DONE_INTERRUPT); + stat &= ~(1 << DMA_DONE_INTERRUPT); + num = (net2272_read(dev, DMAREQ) & (1 << DMA_ENDPOINT_SELECT)) + ? 2 : 1; + + ep = &dev->ep[num]; + net2272_handle_dma(ep); + } + + next_endpoints: + /* endpoint data irq? */ + scratch = stat & 0x0f; + stat &= ~0x0f; + for (num = 0; scratch; num++) { + u8 t; + + /* does this endpoint's FIFO and queue need tending? */ + t = 1 << num; + if ((scratch & t) == 0) + continue; + scratch ^= t; + + ep = &dev->ep[num]; + net2272_handle_ep(ep); + } + + /* some interrupts we can just ignore */ + stat &= ~(1 << SOF_INTERRUPT); + + if (stat) + dev_dbg(dev->dev, "unhandled irqstat0 %02x\n", stat); +} + +static void +net2272_handle_stat1_irqs(struct net2272 *dev, u8 stat) +{ + u8 tmp, mask; + + /* after disconnect there's nothing else to do! */ + tmp = (1 << VBUS_INTERRUPT) | (1 << ROOT_PORT_RESET_INTERRUPT); + mask = (1 << USB_HIGH_SPEED) | (1 << USB_FULL_SPEED); + + if (stat & tmp) { + bool reset = false; + bool disconnect = false; + + /* + * Ignore disconnects and resets if the speed hasn't been set. + * VBUS can bounce and there's always an initial reset. + */ + net2272_write(dev, IRQSTAT1, tmp); + if (dev->gadget.speed != USB_SPEED_UNKNOWN) { + if ((stat & (1 << VBUS_INTERRUPT)) && + (net2272_read(dev, USBCTL1) & + (1 << VBUS_PIN)) == 0) { + disconnect = true; + dev_dbg(dev->dev, "disconnect %s\n", + dev->driver->driver.name); + } else if ((stat & (1 << ROOT_PORT_RESET_INTERRUPT)) && + (net2272_read(dev, USBCTL1) & mask) + == 0) { + reset = true; + dev_dbg(dev->dev, "reset %s\n", + dev->driver->driver.name); + } + + if (disconnect || reset) { + stop_activity(dev, dev->driver); + net2272_ep0_start(dev); + if (dev->async_callbacks) { + spin_unlock(&dev->lock); + if (reset) + usb_gadget_udc_reset(&dev->gadget, dev->driver); + else + (dev->driver->disconnect)(&dev->gadget); + spin_lock(&dev->lock); + } + return; + } + } + stat &= ~tmp; + + if (!stat) + return; + } + + tmp = (1 << SUSPEND_REQUEST_CHANGE_INTERRUPT); + if (stat & tmp) { + net2272_write(dev, IRQSTAT1, tmp); + if (stat & (1 << SUSPEND_REQUEST_INTERRUPT)) { + if (dev->async_callbacks && dev->driver->suspend) + dev->driver->suspend(&dev->gadget); + if (!enable_suspend) { + stat &= ~(1 << SUSPEND_REQUEST_INTERRUPT); + dev_dbg(dev->dev, "Suspend disabled, ignoring\n"); + } + } else { + if (dev->async_callbacks && dev->driver->resume) + dev->driver->resume(&dev->gadget); + } + stat &= ~tmp; + } + + /* clear any other status/irqs */ + if (stat) + net2272_write(dev, IRQSTAT1, stat); + + /* some status we can just ignore */ + stat &= ~((1 << CONTROL_STATUS_INTERRUPT) + | (1 << SUSPEND_REQUEST_INTERRUPT) + | (1 << RESUME_INTERRUPT)); + if (!stat) + return; + else + dev_dbg(dev->dev, "unhandled irqstat1 %02x\n", stat); +} + +static irqreturn_t net2272_irq(int irq, void *_dev) +{ + struct net2272 *dev = _dev; +#if defined(PLX_PCI_RDK) || defined(PLX_PCI_RDK2) + u32 intcsr; +#endif +#if defined(PLX_PCI_RDK) + u8 dmareq; +#endif + spin_lock(&dev->lock); +#if defined(PLX_PCI_RDK) + intcsr = readl(dev->rdk1.plx9054_base_addr + INTCSR); + + if ((intcsr & LOCAL_INTERRUPT_TEST) == LOCAL_INTERRUPT_TEST) { + writel(intcsr & ~(1 << PCI_INTERRUPT_ENABLE), + dev->rdk1.plx9054_base_addr + INTCSR); + net2272_handle_stat1_irqs(dev, net2272_read(dev, IRQSTAT1)); + net2272_handle_stat0_irqs(dev, net2272_read(dev, IRQSTAT0)); + intcsr = readl(dev->rdk1.plx9054_base_addr + INTCSR); + writel(intcsr | (1 << PCI_INTERRUPT_ENABLE), + dev->rdk1.plx9054_base_addr + INTCSR); + } + if ((intcsr & DMA_CHANNEL_0_TEST) == DMA_CHANNEL_0_TEST) { + writeb((1 << CHANNEL_CLEAR_INTERRUPT | (0 << CHANNEL_ENABLE)), + dev->rdk1.plx9054_base_addr + DMACSR0); + + dmareq = net2272_read(dev, DMAREQ); + if (dmareq & 0x01) + net2272_handle_dma(&dev->ep[2]); + else + net2272_handle_dma(&dev->ep[1]); + } +#endif +#if defined(PLX_PCI_RDK2) + /* see if PCI int for us by checking irqstat */ + intcsr = readl(dev->rdk2.fpga_base_addr + RDK2_IRQSTAT); + if (!(intcsr & (1 << NET2272_PCI_IRQ))) { + spin_unlock(&dev->lock); + return IRQ_NONE; + } + /* check dma interrupts */ +#endif + /* Platform/devcice interrupt handler */ +#if !defined(PLX_PCI_RDK) + net2272_handle_stat1_irqs(dev, net2272_read(dev, IRQSTAT1)); + net2272_handle_stat0_irqs(dev, net2272_read(dev, IRQSTAT0)); +#endif + spin_unlock(&dev->lock); + + return IRQ_HANDLED; +} + +static int net2272_present(struct net2272 *dev) +{ + /* + * Quick test to see if CPU can communicate properly with the NET2272. + * Verifies connection using writes and reads to write/read and + * read-only registers. + * + * This routine is strongly recommended especially during early bring-up + * of new hardware, however for designs that do not apply Power On System + * Tests (POST) it may discarded (or perhaps minimized). + */ + unsigned int ii; + u8 val, refval; + + /* Verify NET2272 write/read SCRATCH register can write and read */ + refval = net2272_read(dev, SCRATCH); + for (ii = 0; ii < 0x100; ii += 7) { + net2272_write(dev, SCRATCH, ii); + val = net2272_read(dev, SCRATCH); + if (val != ii) { + dev_dbg(dev->dev, + "%s: write/read SCRATCH register test failed: " + "wrote:0x%2.2x, read:0x%2.2x\n", + __func__, ii, val); + return -EINVAL; + } + } + /* To be nice, we write the original SCRATCH value back: */ + net2272_write(dev, SCRATCH, refval); + + /* Verify NET2272 CHIPREV register is read-only: */ + refval = net2272_read(dev, CHIPREV_2272); + for (ii = 0; ii < 0x100; ii += 7) { + net2272_write(dev, CHIPREV_2272, ii); + val = net2272_read(dev, CHIPREV_2272); + if (val != refval) { + dev_dbg(dev->dev, + "%s: write/read CHIPREV register test failed: " + "wrote 0x%2.2x, read:0x%2.2x expected:0x%2.2x\n", + __func__, ii, val, refval); + return -EINVAL; + } + } + + /* + * Verify NET2272's "NET2270 legacy revision" register + * - NET2272 has two revision registers. The NET2270 legacy revision + * register should read the same value, regardless of the NET2272 + * silicon revision. The legacy register applies to NET2270 + * firmware being applied to the NET2272. + */ + val = net2272_read(dev, CHIPREV_LEGACY); + if (val != NET2270_LEGACY_REV) { + /* + * Unexpected legacy revision value + * - Perhaps the chip is a NET2270? + */ + dev_dbg(dev->dev, + "%s: WARNING: UNEXPECTED NET2272 LEGACY REGISTER VALUE:\n" + " - CHIPREV_LEGACY: expected 0x%2.2x, got:0x%2.2x. (Not NET2272?)\n", + __func__, NET2270_LEGACY_REV, val); + return -EINVAL; + } + + /* + * Verify NET2272 silicon revision + * - This revision register is appropriate for the silicon version + * of the NET2272 + */ + val = net2272_read(dev, CHIPREV_2272); + switch (val) { + case CHIPREV_NET2272_R1: + /* + * NET2272 Rev 1 has DMA related errata: + * - Newer silicon (Rev 1A or better) required + */ + dev_dbg(dev->dev, + "%s: Rev 1 detected: newer silicon recommended for DMA support\n", + __func__); + break; + case CHIPREV_NET2272_R1A: + break; + default: + /* NET2272 silicon version *may* not work with this firmware */ + dev_dbg(dev->dev, + "%s: unexpected silicon revision register value: " + " CHIPREV_2272: 0x%2.2x\n", + __func__, val); + /* + * Return Success, even though the chip rev is not an expected value + * - Older, pre-built firmware can attempt to operate on newer silicon + * - Often, new silicon is perfectly compatible + */ + } + + /* Success: NET2272 checks out OK */ + return 0; +} + +static void +net2272_gadget_release(struct device *_dev) +{ + struct net2272 *dev = container_of(_dev, struct net2272, gadget.dev); + + kfree(dev); +} + +/*---------------------------------------------------------------------------*/ + +static void +net2272_remove(struct net2272 *dev) +{ + if (dev->added) + usb_del_gadget(&dev->gadget); + free_irq(dev->irq, dev); + iounmap(dev->base_addr); + device_remove_file(dev->dev, &dev_attr_registers); + + dev_info(dev->dev, "unbind\n"); +} + +static struct net2272 *net2272_probe_init(struct device *dev, unsigned int irq) +{ + struct net2272 *ret; + + if (!irq) { + dev_dbg(dev, "No IRQ!\n"); + return ERR_PTR(-ENODEV); + } + + /* alloc, and start init */ + ret = kzalloc(sizeof(*ret), GFP_KERNEL); + if (!ret) + return ERR_PTR(-ENOMEM); + + spin_lock_init(&ret->lock); + ret->irq = irq; + ret->dev = dev; + ret->gadget.ops = &net2272_ops; + ret->gadget.max_speed = USB_SPEED_HIGH; + + /* the "gadget" abstracts/virtualizes the controller */ + ret->gadget.name = driver_name; + usb_initialize_gadget(dev, &ret->gadget, net2272_gadget_release); + + return ret; +} + +static int +net2272_probe_fin(struct net2272 *dev, unsigned int irqflags) +{ + int ret; + + /* See if there... */ + if (net2272_present(dev)) { + dev_warn(dev->dev, "2272 not found!\n"); + ret = -ENODEV; + goto err; + } + + net2272_usb_reset(dev); + net2272_usb_reinit(dev); + + ret = request_irq(dev->irq, net2272_irq, irqflags, driver_name, dev); + if (ret) { + dev_err(dev->dev, "request interrupt %i failed\n", dev->irq); + goto err; + } + + dev->chiprev = net2272_read(dev, CHIPREV_2272); + + /* done */ + dev_info(dev->dev, "%s\n", driver_desc); + dev_info(dev->dev, "irq %i, mem %p, chip rev %04x, dma %s\n", + dev->irq, dev->base_addr, dev->chiprev, + dma_mode_string()); + dev_info(dev->dev, "version: %s\n", driver_vers); + + ret = device_create_file(dev->dev, &dev_attr_registers); + if (ret) + goto err_irq; + + ret = usb_add_gadget(&dev->gadget); + if (ret) + goto err_add_udc; + dev->added = 1; + + return 0; + +err_add_udc: + device_remove_file(dev->dev, &dev_attr_registers); + err_irq: + free_irq(dev->irq, dev); + err: + return ret; +} + +#ifdef CONFIG_USB_PCI + +/* + * wrap this driver around the specified device, but + * don't respond over USB until a gadget driver binds to us + */ + +static int +net2272_rdk1_probe(struct pci_dev *pdev, struct net2272 *dev) +{ + unsigned long resource, len, tmp; + void __iomem *mem_mapped_addr[4]; + int ret, i; + + /* + * BAR 0 holds PLX 9054 config registers + * BAR 1 is i/o memory; unused here + * BAR 2 holds EPLD config registers + * BAR 3 holds NET2272 registers + */ + + /* Find and map all address spaces */ + for (i = 0; i < 4; ++i) { + if (i == 1) + continue; /* BAR1 unused */ + + resource = pci_resource_start(pdev, i); + len = pci_resource_len(pdev, i); + + if (!request_mem_region(resource, len, driver_name)) { + dev_dbg(dev->dev, "controller already in use\n"); + ret = -EBUSY; + goto err; + } + + mem_mapped_addr[i] = ioremap(resource, len); + if (mem_mapped_addr[i] == NULL) { + release_mem_region(resource, len); + dev_dbg(dev->dev, "can't map memory\n"); + ret = -EFAULT; + goto err; + } + } + + dev->rdk1.plx9054_base_addr = mem_mapped_addr[0]; + dev->rdk1.epld_base_addr = mem_mapped_addr[2]; + dev->base_addr = mem_mapped_addr[3]; + + /* Set PLX 9054 bus width (16 bits) */ + tmp = readl(dev->rdk1.plx9054_base_addr + LBRD1); + writel((tmp & ~(3 << MEMORY_SPACE_LOCAL_BUS_WIDTH)) | W16_BIT, + dev->rdk1.plx9054_base_addr + LBRD1); + + /* Enable PLX 9054 Interrupts */ + writel(readl(dev->rdk1.plx9054_base_addr + INTCSR) | + (1 << PCI_INTERRUPT_ENABLE) | + (1 << LOCAL_INTERRUPT_INPUT_ENABLE), + dev->rdk1.plx9054_base_addr + INTCSR); + + writeb((1 << CHANNEL_CLEAR_INTERRUPT | (0 << CHANNEL_ENABLE)), + dev->rdk1.plx9054_base_addr + DMACSR0); + + /* reset */ + writeb((1 << EPLD_DMA_ENABLE) | + (1 << DMA_CTL_DACK) | + (1 << DMA_TIMEOUT_ENABLE) | + (1 << USER) | + (0 << MPX_MODE) | + (1 << BUSWIDTH) | + (1 << NET2272_RESET), + dev->base_addr + EPLD_IO_CONTROL_REGISTER); + + mb(); + writeb(readb(dev->base_addr + EPLD_IO_CONTROL_REGISTER) & + ~(1 << NET2272_RESET), + dev->base_addr + EPLD_IO_CONTROL_REGISTER); + udelay(200); + + return 0; + + err: + while (--i >= 0) { + if (i == 1) + continue; /* BAR1 unused */ + iounmap(mem_mapped_addr[i]); + release_mem_region(pci_resource_start(pdev, i), + pci_resource_len(pdev, i)); + } + + return ret; +} + +static int +net2272_rdk2_probe(struct pci_dev *pdev, struct net2272 *dev) +{ + unsigned long resource, len; + void __iomem *mem_mapped_addr[2]; + int ret, i; + + /* + * BAR 0 holds FGPA config registers + * BAR 1 holds NET2272 registers + */ + + /* Find and map all address spaces, bar2-3 unused in rdk 2 */ + for (i = 0; i < 2; ++i) { + resource = pci_resource_start(pdev, i); + len = pci_resource_len(pdev, i); + + if (!request_mem_region(resource, len, driver_name)) { + dev_dbg(dev->dev, "controller already in use\n"); + ret = -EBUSY; + goto err; + } + + mem_mapped_addr[i] = ioremap(resource, len); + if (mem_mapped_addr[i] == NULL) { + release_mem_region(resource, len); + dev_dbg(dev->dev, "can't map memory\n"); + ret = -EFAULT; + goto err; + } + } + + dev->rdk2.fpga_base_addr = mem_mapped_addr[0]; + dev->base_addr = mem_mapped_addr[1]; + + mb(); + /* Set 2272 bus width (16 bits) and reset */ + writel((1 << CHIP_RESET), dev->rdk2.fpga_base_addr + RDK2_LOCCTLRDK); + udelay(200); + writel((1 << BUS_WIDTH), dev->rdk2.fpga_base_addr + RDK2_LOCCTLRDK); + /* Print fpga version number */ + dev_info(dev->dev, "RDK2 FPGA version %08x\n", + readl(dev->rdk2.fpga_base_addr + RDK2_FPGAREV)); + /* Enable FPGA Interrupts */ + writel((1 << NET2272_PCI_IRQ), dev->rdk2.fpga_base_addr + RDK2_IRQENB); + + return 0; + + err: + while (--i >= 0) { + iounmap(mem_mapped_addr[i]); + release_mem_region(pci_resource_start(pdev, i), + pci_resource_len(pdev, i)); + } + + return ret; +} + +static int +net2272_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct net2272 *dev; + int ret; + + dev = net2272_probe_init(&pdev->dev, pdev->irq); + if (IS_ERR(dev)) + return PTR_ERR(dev); + dev->dev_id = pdev->device; + + if (pci_enable_device(pdev) < 0) { + ret = -ENODEV; + goto err_put; + } + + pci_set_master(pdev); + + switch (pdev->device) { + case PCI_DEVICE_ID_RDK1: ret = net2272_rdk1_probe(pdev, dev); break; + case PCI_DEVICE_ID_RDK2: ret = net2272_rdk2_probe(pdev, dev); break; + default: BUG(); + } + if (ret) + goto err_pci; + + ret = net2272_probe_fin(dev, 0); + if (ret) + goto err_pci; + + pci_set_drvdata(pdev, dev); + + return 0; + + err_pci: + pci_disable_device(pdev); + err_put: + usb_put_gadget(&dev->gadget); + + return ret; +} + +static void +net2272_rdk1_remove(struct pci_dev *pdev, struct net2272 *dev) +{ + int i; + + /* disable PLX 9054 interrupts */ + writel(readl(dev->rdk1.plx9054_base_addr + INTCSR) & + ~(1 << PCI_INTERRUPT_ENABLE), + dev->rdk1.plx9054_base_addr + INTCSR); + + /* clean up resources allocated during probe() */ + iounmap(dev->rdk1.plx9054_base_addr); + iounmap(dev->rdk1.epld_base_addr); + + for (i = 0; i < 4; ++i) { + if (i == 1) + continue; /* BAR1 unused */ + release_mem_region(pci_resource_start(pdev, i), + pci_resource_len(pdev, i)); + } +} + +static void +net2272_rdk2_remove(struct pci_dev *pdev, struct net2272 *dev) +{ + int i; + + /* disable fpga interrupts + writel(readl(dev->rdk1.plx9054_base_addr + INTCSR) & + ~(1 << PCI_INTERRUPT_ENABLE), + dev->rdk1.plx9054_base_addr + INTCSR); + */ + + /* clean up resources allocated during probe() */ + iounmap(dev->rdk2.fpga_base_addr); + + for (i = 0; i < 2; ++i) + release_mem_region(pci_resource_start(pdev, i), + pci_resource_len(pdev, i)); +} + +static void +net2272_pci_remove(struct pci_dev *pdev) +{ + struct net2272 *dev = pci_get_drvdata(pdev); + + net2272_remove(dev); + + switch (pdev->device) { + case PCI_DEVICE_ID_RDK1: net2272_rdk1_remove(pdev, dev); break; + case PCI_DEVICE_ID_RDK2: net2272_rdk2_remove(pdev, dev); break; + default: BUG(); + } + + pci_disable_device(pdev); + + usb_put_gadget(&dev->gadget); +} + +/* Table of matching PCI IDs */ +static struct pci_device_id pci_ids[] = { + { /* RDK 1 card */ + .class = ((PCI_CLASS_BRIDGE_OTHER << 8) | 0xfe), + .class_mask = 0, + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_RDK1, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + }, + { /* RDK 2 card */ + .class = ((PCI_CLASS_BRIDGE_OTHER << 8) | 0xfe), + .class_mask = 0, + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_RDK2, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + }, + { } +}; +MODULE_DEVICE_TABLE(pci, pci_ids); + +static struct pci_driver net2272_pci_driver = { + .name = driver_name, + .id_table = pci_ids, + + .probe = net2272_pci_probe, + .remove = net2272_pci_remove, +}; + +static int net2272_pci_register(void) +{ + return pci_register_driver(&net2272_pci_driver); +} + +static void net2272_pci_unregister(void) +{ + pci_unregister_driver(&net2272_pci_driver); +} + +#else +static inline int net2272_pci_register(void) { return 0; } +static inline void net2272_pci_unregister(void) { } +#endif + +/*---------------------------------------------------------------------------*/ + +static int +net2272_plat_probe(struct platform_device *pdev) +{ + struct net2272 *dev; + int ret; + unsigned int irqflags; + resource_size_t base, len; + struct resource *iomem, *iomem_bus, *irq_res; + + irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + iomem_bus = platform_get_resource(pdev, IORESOURCE_BUS, 0); + if (!irq_res || !iomem) { + dev_err(&pdev->dev, "must provide irq/base addr"); + return -EINVAL; + } + + dev = net2272_probe_init(&pdev->dev, irq_res->start); + if (IS_ERR(dev)) + return PTR_ERR(dev); + + irqflags = 0; + if (irq_res->flags & IORESOURCE_IRQ_HIGHEDGE) + irqflags |= IRQF_TRIGGER_RISING; + if (irq_res->flags & IORESOURCE_IRQ_LOWEDGE) + irqflags |= IRQF_TRIGGER_FALLING; + if (irq_res->flags & IORESOURCE_IRQ_HIGHLEVEL) + irqflags |= IRQF_TRIGGER_HIGH; + if (irq_res->flags & IORESOURCE_IRQ_LOWLEVEL) + irqflags |= IRQF_TRIGGER_LOW; + + base = iomem->start; + len = resource_size(iomem); + if (iomem_bus) + dev->base_shift = iomem_bus->start; + + if (!request_mem_region(base, len, driver_name)) { + dev_dbg(dev->dev, "get request memory region!\n"); + ret = -EBUSY; + goto err; + } + dev->base_addr = ioremap(base, len); + if (!dev->base_addr) { + dev_dbg(dev->dev, "can't map memory\n"); + ret = -EFAULT; + goto err_req; + } + + ret = net2272_probe_fin(dev, IRQF_TRIGGER_LOW); + if (ret) + goto err_io; + + platform_set_drvdata(pdev, dev); + dev_info(&pdev->dev, "running in 16-bit, %sbyte swap local bus mode\n", + (net2272_read(dev, LOCCTL) & (1 << BYTE_SWAP)) ? "" : "no "); + + return 0; + + err_io: + iounmap(dev->base_addr); + err_req: + release_mem_region(base, len); + err: + usb_put_gadget(&dev->gadget); + + return ret; +} + +static int +net2272_plat_remove(struct platform_device *pdev) +{ + struct net2272 *dev = platform_get_drvdata(pdev); + + net2272_remove(dev); + + release_mem_region(pdev->resource[0].start, + resource_size(&pdev->resource[0])); + + usb_put_gadget(&dev->gadget); + + return 0; +} + +static struct platform_driver net2272_plat_driver = { + .probe = net2272_plat_probe, + .remove = net2272_plat_remove, + .driver = { + .name = driver_name, + }, + /* FIXME .suspend, .resume */ +}; +MODULE_ALIAS("platform:net2272"); + +static int __init net2272_init(void) +{ + int ret; + + ret = net2272_pci_register(); + if (ret) + return ret; + ret = platform_driver_register(&net2272_plat_driver); + if (ret) + goto err_pci; + return ret; + +err_pci: + net2272_pci_unregister(); + return ret; +} +module_init(net2272_init); + +static void __exit net2272_cleanup(void) +{ + net2272_pci_unregister(); + platform_driver_unregister(&net2272_plat_driver); +} +module_exit(net2272_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("PLX Technology, Inc."); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/udc/net2272.h b/drivers/usb/gadget/udc/net2272.h new file mode 100644 index 000000000..a9994f737 --- /dev/null +++ b/drivers/usb/gadget/udc/net2272.h @@ -0,0 +1,584 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * PLX NET2272 high/full speed USB device controller + * + * Copyright (C) 2005-2006 PLX Technology, Inc. + * Copyright (C) 2006-2011 Analog Devices, Inc. + */ + +#ifndef __NET2272_H__ +#define __NET2272_H__ + +/* Main Registers */ +#define REGADDRPTR 0x00 +#define REGDATA 0x01 +#define IRQSTAT0 0x02 +#define ENDPOINT_0_INTERRUPT 0 +#define ENDPOINT_A_INTERRUPT 1 +#define ENDPOINT_B_INTERRUPT 2 +#define ENDPOINT_C_INTERRUPT 3 +#define VIRTUALIZED_ENDPOINT_INTERRUPT 4 +#define SETUP_PACKET_INTERRUPT 5 +#define DMA_DONE_INTERRUPT 6 +#define SOF_INTERRUPT 7 +#define IRQSTAT1 0x03 +#define CONTROL_STATUS_INTERRUPT 1 +#define VBUS_INTERRUPT 2 +#define SUSPEND_REQUEST_INTERRUPT 3 +#define SUSPEND_REQUEST_CHANGE_INTERRUPT 4 +#define RESUME_INTERRUPT 5 +#define ROOT_PORT_RESET_INTERRUPT 6 +#define RESET_STATUS 7 +#define PAGESEL 0x04 +#define DMAREQ 0x1c +#define DMA_ENDPOINT_SELECT 0 +#define DREQ_POLARITY 1 +#define DACK_POLARITY 2 +#define EOT_POLARITY 3 +#define DMA_CONTROL_DACK 4 +#define DMA_REQUEST_ENABLE 5 +#define DMA_REQUEST 6 +#define DMA_BUFFER_VALID 7 +#define SCRATCH 0x1d +#define IRQENB0 0x20 +#define ENDPOINT_0_INTERRUPT_ENABLE 0 +#define ENDPOINT_A_INTERRUPT_ENABLE 1 +#define ENDPOINT_B_INTERRUPT_ENABLE 2 +#define ENDPOINT_C_INTERRUPT_ENABLE 3 +#define VIRTUALIZED_ENDPOINT_INTERRUPT_ENABLE 4 +#define SETUP_PACKET_INTERRUPT_ENABLE 5 +#define DMA_DONE_INTERRUPT_ENABLE 6 +#define SOF_INTERRUPT_ENABLE 7 +#define IRQENB1 0x21 +#define VBUS_INTERRUPT_ENABLE 2 +#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3 +#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 4 +#define RESUME_INTERRUPT_ENABLE 5 +#define ROOT_PORT_RESET_INTERRUPT_ENABLE 6 +#define LOCCTL 0x22 +#define DATA_WIDTH 0 +#define LOCAL_CLOCK_OUTPUT 1 +#define LOCAL_CLOCK_OUTPUT_OFF 0 +#define LOCAL_CLOCK_OUTPUT_3_75MHZ 1 +#define LOCAL_CLOCK_OUTPUT_7_5MHZ 2 +#define LOCAL_CLOCK_OUTPUT_15MHZ 3 +#define LOCAL_CLOCK_OUTPUT_30MHZ 4 +#define LOCAL_CLOCK_OUTPUT_60MHZ 5 +#define DMA_SPLIT_BUS_MODE 4 +#define BYTE_SWAP 5 +#define BUFFER_CONFIGURATION 6 +#define BUFFER_CONFIGURATION_EPA512_EPB512 0 +#define BUFFER_CONFIGURATION_EPA1024_EPB512 1 +#define BUFFER_CONFIGURATION_EPA1024_EPB1024 2 +#define BUFFER_CONFIGURATION_EPA1024DB 3 +#define CHIPREV_LEGACY 0x23 +#define NET2270_LEGACY_REV 0x40 +#define LOCCTL1 0x24 +#define DMA_MODE 0 +#define SLOW_DREQ 0 +#define FAST_DREQ 1 +#define BURST_MODE 2 +#define DMA_DACK_ENABLE 2 +#define CHIPREV_2272 0x25 +#define CHIPREV_NET2272_R1 0x10 +#define CHIPREV_NET2272_R1A 0x11 +/* USB Registers */ +#define USBCTL0 0x18 +#define IO_WAKEUP_ENABLE 1 +#define USB_DETECT_ENABLE 3 +#define USB_ROOT_PORT_WAKEUP_ENABLE 5 +#define USBCTL1 0x19 +#define VBUS_PIN 0 +#define USB_FULL_SPEED 1 +#define USB_HIGH_SPEED 2 +#define GENERATE_RESUME 3 +#define VIRTUAL_ENDPOINT_ENABLE 4 +#define FRAME0 0x1a +#define FRAME1 0x1b +#define OURADDR 0x30 +#define FORCE_IMMEDIATE 7 +#define USBDIAG 0x31 +#define FORCE_TRANSMIT_CRC_ERROR 0 +#define PREVENT_TRANSMIT_BIT_STUFF 1 +#define FORCE_RECEIVE_ERROR 2 +#define FAST_TIMES 4 +#define USBTEST 0x32 +#define TEST_MODE_SELECT 0 +#define NORMAL_OPERATION 0 +#define XCVRDIAG 0x33 +#define FORCE_FULL_SPEED 2 +#define FORCE_HIGH_SPEED 3 +#define OPMODE 4 +#define NORMAL_OPERATION 0 +#define NON_DRIVING 1 +#define DISABLE_BITSTUFF_AND_NRZI_ENCODE 2 +#define LINESTATE 6 +#define SE0_STATE 0 +#define J_STATE 1 +#define K_STATE 2 +#define SE1_STATE 3 +#define VIRTOUT0 0x34 +#define VIRTOUT1 0x35 +#define VIRTIN0 0x36 +#define VIRTIN1 0x37 +#define SETUP0 0x40 +#define SETUP1 0x41 +#define SETUP2 0x42 +#define SETUP3 0x43 +#define SETUP4 0x44 +#define SETUP5 0x45 +#define SETUP6 0x46 +#define SETUP7 0x47 +/* Endpoint Registers (Paged via PAGESEL) */ +#define EP_DATA 0x05 +#define EP_STAT0 0x06 +#define DATA_IN_TOKEN_INTERRUPT 0 +#define DATA_OUT_TOKEN_INTERRUPT 1 +#define DATA_PACKET_TRANSMITTED_INTERRUPT 2 +#define DATA_PACKET_RECEIVED_INTERRUPT 3 +#define SHORT_PACKET_TRANSFERRED_INTERRUPT 4 +#define NAK_OUT_PACKETS 5 +#define BUFFER_EMPTY 6 +#define BUFFER_FULL 7 +#define EP_STAT1 0x07 +#define TIMEOUT 0 +#define USB_OUT_ACK_SENT 1 +#define USB_OUT_NAK_SENT 2 +#define USB_IN_ACK_RCVD 3 +#define USB_IN_NAK_SENT 4 +#define USB_STALL_SENT 5 +#define LOCAL_OUT_ZLP 6 +#define BUFFER_FLUSH 7 +#define EP_TRANSFER0 0x08 +#define EP_TRANSFER1 0x09 +#define EP_TRANSFER2 0x0a +#define EP_IRQENB 0x0b +#define DATA_IN_TOKEN_INTERRUPT_ENABLE 0 +#define DATA_OUT_TOKEN_INTERRUPT_ENABLE 1 +#define DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE 2 +#define DATA_PACKET_RECEIVED_INTERRUPT_ENABLE 3 +#define SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE 4 +#define EP_AVAIL0 0x0c +#define EP_AVAIL1 0x0d +#define EP_RSPCLR 0x0e +#define EP_RSPSET 0x0f +#define ENDPOINT_HALT 0 +#define ENDPOINT_TOGGLE 1 +#define NAK_OUT_PACKETS_MODE 2 +#define CONTROL_STATUS_PHASE_HANDSHAKE 3 +#define INTERRUPT_MODE 4 +#define AUTOVALIDATE 5 +#define HIDE_STATUS_PHASE 6 +#define ALT_NAK_OUT_PACKETS 7 +#define EP_MAXPKT0 0x28 +#define EP_MAXPKT1 0x29 +#define ADDITIONAL_TRANSACTION_OPPORTUNITIES 3 +#define NONE_ADDITIONAL_TRANSACTION 0 +#define ONE_ADDITIONAL_TRANSACTION 1 +#define TWO_ADDITIONAL_TRANSACTION 2 +#define EP_CFG 0x2a +#define ENDPOINT_NUMBER 0 +#define ENDPOINT_DIRECTION 4 +#define ENDPOINT_TYPE 5 +#define ENDPOINT_ENABLE 7 +#define EP_HBW 0x2b +#define HIGH_BANDWIDTH_OUT_TRANSACTION_PID 0 +#define DATA0_PID 0 +#define DATA1_PID 1 +#define DATA2_PID 2 +#define MDATA_PID 3 +#define EP_BUFF_STATES 0x2c +#define BUFFER_A_STATE 0 +#define BUFFER_B_STATE 2 +#define BUFF_FREE 0 +#define BUFF_VALID 1 +#define BUFF_LCL 2 +#define BUFF_USB 3 + +/*---------------------------------------------------------------------------*/ + +#define PCI_DEVICE_ID_RDK1 0x9054 + +/* PCI-RDK EPLD Registers */ +#define RDK_EPLD_IO_REGISTER1 0x00000000 +#define RDK_EPLD_USB_RESET 0 +#define RDK_EPLD_USB_POWERDOWN 1 +#define RDK_EPLD_USB_WAKEUP 2 +#define RDK_EPLD_USB_EOT 3 +#define RDK_EPLD_DPPULL 4 +#define RDK_EPLD_IO_REGISTER2 0x00000004 +#define RDK_EPLD_BUSWIDTH 0 +#define RDK_EPLD_USER 2 +#define RDK_EPLD_RESET_INTERRUPT_ENABLE 3 +#define RDK_EPLD_DMA_TIMEOUT_ENABLE 4 +#define RDK_EPLD_STATUS_REGISTER 0x00000008 +#define RDK_EPLD_USB_LRESET 0 +#define RDK_EPLD_REVISION_REGISTER 0x0000000c + +/* PCI-RDK PLX 9054 Registers */ +#define INTCSR 0x68 +#define PCI_INTERRUPT_ENABLE 8 +#define LOCAL_INTERRUPT_INPUT_ENABLE 11 +#define LOCAL_INPUT_INTERRUPT_ACTIVE 15 +#define LOCAL_DMA_CHANNEL_0_INTERRUPT_ENABLE 18 +#define LOCAL_DMA_CHANNEL_1_INTERRUPT_ENABLE 19 +#define DMA_CHANNEL_0_INTERRUPT_ACTIVE 21 +#define DMA_CHANNEL_1_INTERRUPT_ACTIVE 22 +#define CNTRL 0x6C +#define RELOAD_CONFIGURATION_REGISTERS 29 +#define PCI_ADAPTER_SOFTWARE_RESET 30 +#define DMAMODE0 0x80 +#define LOCAL_BUS_WIDTH 0 +#define INTERNAL_WAIT_STATES 2 +#define TA_READY_INPUT_ENABLE 6 +#define LOCAL_BURST_ENABLE 8 +#define SCATTER_GATHER_MODE 9 +#define DONE_INTERRUPT_ENABLE 10 +#define LOCAL_ADDRESSING_MODE 11 +#define DEMAND_MODE 12 +#define DMA_EOT_ENABLE 14 +#define FAST_SLOW_TERMINATE_MODE_SELECT 15 +#define DMA_CHANNEL_INTERRUPT_SELECT 17 +#define DMAPADR0 0x84 +#define DMALADR0 0x88 +#define DMASIZ0 0x8c +#define DMADPR0 0x90 +#define DESCRIPTOR_LOCATION 0 +#define END_OF_CHAIN 1 +#define INTERRUPT_AFTER_TERMINAL_COUNT 2 +#define DIRECTION_OF_TRANSFER 3 +#define DMACSR0 0xa8 +#define CHANNEL_ENABLE 0 +#define CHANNEL_START 1 +#define CHANNEL_ABORT 2 +#define CHANNEL_CLEAR_INTERRUPT 3 +#define CHANNEL_DONE 4 +#define DMATHR 0xb0 +#define LBRD1 0xf8 +#define MEMORY_SPACE_LOCAL_BUS_WIDTH 0 +#define W8_BIT 0 +#define W16_BIT 1 + +/* Special OR'ing of INTCSR bits */ +#define LOCAL_INTERRUPT_TEST \ + ((1 << LOCAL_INPUT_INTERRUPT_ACTIVE) | \ + (1 << LOCAL_INTERRUPT_INPUT_ENABLE)) + +#define DMA_CHANNEL_0_TEST \ + ((1 << DMA_CHANNEL_0_INTERRUPT_ACTIVE) | \ + (1 << LOCAL_DMA_CHANNEL_0_INTERRUPT_ENABLE)) + +#define DMA_CHANNEL_1_TEST \ + ((1 << DMA_CHANNEL_1_INTERRUPT_ACTIVE) | \ + (1 << LOCAL_DMA_CHANNEL_1_INTERRUPT_ENABLE)) + +/* EPLD Registers */ +#define RDK_EPLD_IO_REGISTER1 0x00000000 +#define RDK_EPLD_USB_RESET 0 +#define RDK_EPLD_USB_POWERDOWN 1 +#define RDK_EPLD_USB_WAKEUP 2 +#define RDK_EPLD_USB_EOT 3 +#define RDK_EPLD_DPPULL 4 +#define RDK_EPLD_IO_REGISTER2 0x00000004 +#define RDK_EPLD_BUSWIDTH 0 +#define RDK_EPLD_USER 2 +#define RDK_EPLD_RESET_INTERRUPT_ENABLE 3 +#define RDK_EPLD_DMA_TIMEOUT_ENABLE 4 +#define RDK_EPLD_STATUS_REGISTER 0x00000008 +#define RDK_EPLD_USB_LRESET 0 +#define RDK_EPLD_REVISION_REGISTER 0x0000000c + +#define EPLD_IO_CONTROL_REGISTER 0x400 +#define NET2272_RESET 0 +#define BUSWIDTH 1 +#define MPX_MODE 3 +#define USER 4 +#define DMA_TIMEOUT_ENABLE 5 +#define DMA_CTL_DACK 6 +#define EPLD_DMA_ENABLE 7 +#define EPLD_DMA_CONTROL_REGISTER 0x800 +#define SPLIT_DMA_MODE 0 +#define SPLIT_DMA_DIRECTION 1 +#define SPLIT_DMA_ENABLE 2 +#define SPLIT_DMA_INTERRUPT_ENABLE 3 +#define SPLIT_DMA_INTERRUPT 4 +#define EPLD_DMA_MODE 5 +#define EPLD_DMA_CONTROLLER_ENABLE 7 +#define SPLIT_DMA_ADDRESS_LOW 0xc00 +#define SPLIT_DMA_ADDRESS_HIGH 0x1000 +#define SPLIT_DMA_BYTE_COUNT_LOW 0x1400 +#define SPLIT_DMA_BYTE_COUNT_HIGH 0x1800 +#define EPLD_REVISION_REGISTER 0x1c00 +#define SPLIT_DMA_RAM 0x4000 +#define DMA_RAM_SIZE 0x1000 + +/*---------------------------------------------------------------------------*/ + +#define PCI_DEVICE_ID_RDK2 0x3272 + +/* PCI-RDK version 2 registers */ + +/* Main Control Registers */ + +#define RDK2_IRQENB 0x00 +#define RDK2_IRQSTAT 0x04 +#define PB7 23 +#define PB6 22 +#define PB5 21 +#define PB4 20 +#define PB3 19 +#define PB2 18 +#define PB1 17 +#define PB0 16 +#define GP3 23 +#define GP2 23 +#define GP1 23 +#define GP0 23 +#define DMA_RETRY_ABORT 6 +#define DMA_PAUSE_DONE 5 +#define DMA_ABORT_DONE 4 +#define DMA_OUT_FIFO_TRANSFER_DONE 3 +#define DMA_LOCAL_DONE 2 +#define DMA_PCI_DONE 1 +#define NET2272_PCI_IRQ 0 + +#define RDK2_LOCCTLRDK 0x08 +#define CHIP_RESET 3 +#define SPLIT_DMA 2 +#define MULTIPLEX_MODE 1 +#define BUS_WIDTH 0 + +#define RDK2_GPIOCTL 0x10 +#define GP3_OUT_ENABLE 7 +#define GP2_OUT_ENABLE 6 +#define GP1_OUT_ENABLE 5 +#define GP0_OUT_ENABLE 4 +#define GP3_DATA 3 +#define GP2_DATA 2 +#define GP1_DATA 1 +#define GP0_DATA 0 + +#define RDK2_LEDSW 0x14 +#define LED3 27 +#define LED2 26 +#define LED1 25 +#define LED0 24 +#define PBUTTON 16 +#define DIPSW 0 + +#define RDK2_DIAG 0x18 +#define RDK2_FAST_TIMES 2 +#define FORCE_PCI_SERR 1 +#define FORCE_PCI_INT 0 +#define RDK2_FPGAREV 0x1C + +/* Dma Control registers */ +#define RDK2_DMACTL 0x80 +#define ADDR_HOLD 24 +#define RETRY_COUNT 16 /* 23:16 */ +#define FIFO_THRESHOLD 11 /* 15:11 */ +#define MEM_WRITE_INVALIDATE 10 +#define READ_MULTIPLE 9 +#define READ_LINE 8 +#define RDK2_DMA_MODE 6 /* 7:6 */ +#define CONTROL_DACK 5 +#define EOT_ENABLE 4 +#define EOT_POLARITY 3 +#define DACK_POLARITY 2 +#define DREQ_POLARITY 1 +#define DMA_ENABLE 0 + +#define RDK2_DMASTAT 0x84 +#define GATHER_COUNT 12 /* 14:12 */ +#define FIFO_COUNT 6 /* 11:6 */ +#define FIFO_FLUSH 5 +#define FIFO_TRANSFER 4 +#define PAUSE_DONE 3 +#define ABORT_DONE 2 +#define DMA_ABORT 1 +#define DMA_START 0 + +#define RDK2_DMAPCICOUNT 0x88 +#define DMA_DIRECTION 31 +#define DMA_PCI_BYTE_COUNT 0 /* 0:23 */ + +#define RDK2_DMALOCCOUNT 0x8C /* 0:23 dma local byte count */ + +#define RDK2_DMAADDR 0x90 /* 2:31 PCI bus starting address */ + +/*---------------------------------------------------------------------------*/ + +#define REG_INDEXED_THRESHOLD (1 << 5) + +/* DRIVER DATA STRUCTURES and UTILITIES */ +struct net2272_ep { + struct usb_ep ep; + struct net2272 *dev; + unsigned long irqs; + + /* analogous to a host-side qh */ + struct list_head queue; + const struct usb_endpoint_descriptor *desc; + unsigned num:8, + fifo_size:12, + stopped:1, + wedged:1, + is_in:1, + is_iso:1, + dma:1, + not_empty:1; +}; + +struct net2272 { + /* each device provides one gadget, several endpoints */ + struct usb_gadget gadget; + struct device *dev; + unsigned short dev_id; + + spinlock_t lock; + struct net2272_ep ep[4]; + struct usb_gadget_driver *driver; + unsigned protocol_stall:1, + softconnect:1, + wakeup:1, + added:1, + async_callbacks:1, + dma_eot_polarity:1, + dma_dack_polarity:1, + dma_dreq_polarity:1, + dma_busy:1; + u16 chiprev; + u8 pagesel; + + unsigned int irq; + unsigned short fifo_mode; + + unsigned int base_shift; + u16 __iomem *base_addr; + union { +#ifdef CONFIG_USB_PCI + struct { + void __iomem *plx9054_base_addr; + void __iomem *epld_base_addr; + } rdk1; + struct { + /* Bar0, Bar1 is base_addr both mem-mapped */ + void __iomem *fpga_base_addr; + } rdk2; +#endif + }; +}; + +static void __iomem * +net2272_reg_addr(struct net2272 *dev, unsigned int reg) +{ + return dev->base_addr + (reg << dev->base_shift); +} + +static void +net2272_write(struct net2272 *dev, unsigned int reg, u8 value) +{ + if (reg >= REG_INDEXED_THRESHOLD) { + /* + * Indexed register; use REGADDRPTR/REGDATA + * - Save and restore REGADDRPTR. This prevents REGADDRPTR from + * changes between other code sections, but it is time consuming. + * - Performance tips: either do not save and restore REGADDRPTR (if it + * is safe) or do save/restore operations only in critical sections. + u8 tmp = readb(dev->base_addr + REGADDRPTR); + */ + writeb((u8)reg, net2272_reg_addr(dev, REGADDRPTR)); + writeb(value, net2272_reg_addr(dev, REGDATA)); + /* writeb(tmp, net2272_reg_addr(dev, REGADDRPTR)); */ + } else + writeb(value, net2272_reg_addr(dev, reg)); +} + +static u8 +net2272_read(struct net2272 *dev, unsigned int reg) +{ + u8 ret; + + if (reg >= REG_INDEXED_THRESHOLD) { + /* + * Indexed register; use REGADDRPTR/REGDATA + * - Save and restore REGADDRPTR. This prevents REGADDRPTR from + * changes between other code sections, but it is time consuming. + * - Performance tips: either do not save and restore REGADDRPTR (if it + * is safe) or do save/restore operations only in critical sections. + u8 tmp = readb(dev->base_addr + REGADDRPTR); + */ + writeb((u8)reg, net2272_reg_addr(dev, REGADDRPTR)); + ret = readb(net2272_reg_addr(dev, REGDATA)); + /* writeb(tmp, net2272_reg_addr(dev, REGADDRPTR)); */ + } else + ret = readb(net2272_reg_addr(dev, reg)); + + return ret; +} + +static void +net2272_ep_write(struct net2272_ep *ep, unsigned int reg, u8 value) +{ + struct net2272 *dev = ep->dev; + + if (dev->pagesel != ep->num) { + net2272_write(dev, PAGESEL, ep->num); + dev->pagesel = ep->num; + } + net2272_write(dev, reg, value); +} + +static u8 +net2272_ep_read(struct net2272_ep *ep, unsigned int reg) +{ + struct net2272 *dev = ep->dev; + + if (dev->pagesel != ep->num) { + net2272_write(dev, PAGESEL, ep->num); + dev->pagesel = ep->num; + } + return net2272_read(dev, reg); +} + +static void allow_status(struct net2272_ep *ep) +{ + /* ep0 only */ + net2272_ep_write(ep, EP_RSPCLR, + (1 << CONTROL_STATUS_PHASE_HANDSHAKE) | + (1 << ALT_NAK_OUT_PACKETS) | + (1 << NAK_OUT_PACKETS_MODE)); + ep->stopped = 1; +} + +static void set_halt(struct net2272_ep *ep) +{ + /* ep0 and bulk/intr endpoints */ + net2272_ep_write(ep, EP_RSPCLR, 1 << CONTROL_STATUS_PHASE_HANDSHAKE); + net2272_ep_write(ep, EP_RSPSET, 1 << ENDPOINT_HALT); +} + +static void clear_halt(struct net2272_ep *ep) +{ + /* ep0 and bulk/intr endpoints */ + net2272_ep_write(ep, EP_RSPCLR, + (1 << ENDPOINT_HALT) | (1 << ENDPOINT_TOGGLE)); +} + +/* count (<= 4) bytes in the next fifo write will be valid */ +static void set_fifo_bytecount(struct net2272_ep *ep, unsigned count) +{ + /* net2272_ep_write will truncate to u8 for us */ + net2272_ep_write(ep, EP_TRANSFER2, count >> 16); + net2272_ep_write(ep, EP_TRANSFER1, count >> 8); + net2272_ep_write(ep, EP_TRANSFER0, count); +} + +struct net2272_request { + struct usb_request req; + struct list_head queue; + unsigned mapped:1, + valid:1; +}; + +#endif diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c new file mode 100644 index 000000000..1b929c519 --- /dev/null +++ b/drivers/usb/gadget/udc/net2280.c @@ -0,0 +1,3884 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for the PLX NET2280 USB device controller. + * Specs and errata are available from <http://www.plxtech.com>. + * + * PLX Technology Inc. (formerly NetChip Technology) supported the + * development of this driver. + * + * + * CODE STATUS HIGHLIGHTS + * + * This driver should work well with most "gadget" drivers, including + * the Mass Storage, Serial, and Ethernet/RNDIS gadget drivers + * as well as Gadget Zero and Gadgetfs. + * + * DMA is enabled by default. + * + * MSI is enabled by default. The legacy IRQ is used if MSI couldn't + * be enabled. + * + * Note that almost all the errata workarounds here are only needed for + * rev1 chips. Rev1a silicon (0110) fixes almost all of them. + */ + +/* + * Copyright (C) 2003 David Brownell + * Copyright (C) 2003-2005 PLX Technology, Inc. + * Copyright (C) 2014 Ricardo Ribalda - Qtechnology/AS + * + * Modified Seth Levy 2005 PLX Technology, Inc. to provide compatibility + * with 2282 chip + * + * Modified Ricardo Ribalda Qtechnology AS to provide compatibility + * with usb 338x chip. Based on PLX driver + */ + +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/prefetch.h> +#include <linux/io.h> +#include <linux/iopoll.h> + +#include <asm/byteorder.h> +#include <asm/irq.h> +#include <asm/unaligned.h> + +#define DRIVER_DESC "PLX NET228x/USB338x USB Peripheral Controller" +#define DRIVER_VERSION "2005 Sept 27/v3.0" + +#define EP_DONTUSE 13 /* nonzero */ + +#define USE_RDK_LEDS /* GPIO pins control three LEDs */ + + +static const char driver_name[] = "net2280"; +static const char driver_desc[] = DRIVER_DESC; + +static const u32 ep_bit[9] = { 0, 17, 2, 19, 4, 1, 18, 3, 20 }; +static const char ep0name[] = "ep0"; + +#define EP_INFO(_name, _caps) \ + { \ + .name = _name, \ + .caps = _caps, \ + } + +static const struct { + const char *name; + const struct usb_ep_caps caps; +} ep_info_dft[] = { /* Default endpoint configuration */ + EP_INFO(ep0name, + USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, USB_EP_CAPS_DIR_ALL)), + EP_INFO("ep-a", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_ALL)), + EP_INFO("ep-b", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_ALL)), + EP_INFO("ep-c", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_ALL)), + EP_INFO("ep-d", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_ALL)), + EP_INFO("ep-e", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_ALL)), + EP_INFO("ep-f", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_ALL)), + EP_INFO("ep-g", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_ALL)), + EP_INFO("ep-h", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_ALL)), +}, ep_info_adv[] = { /* Endpoints for usb3380 advance mode */ + EP_INFO(ep0name, + USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, USB_EP_CAPS_DIR_ALL)), + EP_INFO("ep1in", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep2out", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep3in", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep4out", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep1out", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep2in", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep3out", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep4in", + USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_IN)), +}; + +#undef EP_INFO + +/* mode 0 == ep-{a,b,c,d} 1K fifo each + * mode 1 == ep-{a,b} 2K fifo each, ep-{c,d} unavailable + * mode 2 == ep-a 2K fifo, ep-{b,c} 1K each, ep-d unavailable + */ +static ushort fifo_mode; + +/* "modprobe net2280 fifo_mode=1" etc */ +module_param(fifo_mode, ushort, 0644); + +/* enable_suspend -- When enabled, the driver will respond to + * USB suspend requests by powering down the NET2280. Otherwise, + * USB suspend requests will be ignored. This is acceptable for + * self-powered devices + */ +static bool enable_suspend; + +/* "modprobe net2280 enable_suspend=1" etc */ +module_param(enable_suspend, bool, 0444); + +#define DIR_STRING(bAddress) (((bAddress) & USB_DIR_IN) ? "in" : "out") + +static char *type_string(u8 bmAttributes) +{ + switch ((bmAttributes) & USB_ENDPOINT_XFERTYPE_MASK) { + case USB_ENDPOINT_XFER_BULK: return "bulk"; + case USB_ENDPOINT_XFER_ISOC: return "iso"; + case USB_ENDPOINT_XFER_INT: return "intr"; + } + return "control"; +} + +#include "net2280.h" + +#define valid_bit cpu_to_le32(BIT(VALID_BIT)) +#define dma_done_ie cpu_to_le32(BIT(DMA_DONE_INTERRUPT_ENABLE)) + +static void ep_clear_seqnum(struct net2280_ep *ep); +static void stop_activity(struct net2280 *dev, + struct usb_gadget_driver *driver); +static void ep0_start(struct net2280 *dev); + +/*-------------------------------------------------------------------------*/ +static inline void enable_pciirqenb(struct net2280_ep *ep) +{ + u32 tmp = readl(&ep->dev->regs->pciirqenb0); + + if (ep->dev->quirks & PLX_LEGACY) + tmp |= BIT(ep->num); + else + tmp |= BIT(ep_bit[ep->num]); + writel(tmp, &ep->dev->regs->pciirqenb0); + + return; +} + +static int +net2280_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) +{ + struct net2280 *dev; + struct net2280_ep *ep; + u32 max; + u32 tmp = 0; + u32 type; + unsigned long flags; + static const u32 ep_key[9] = { 1, 0, 1, 0, 1, 1, 0, 1, 0 }; + int ret = 0; + + ep = container_of(_ep, struct net2280_ep, ep); + if (!_ep || !desc || ep->desc || _ep->name == ep0name || + desc->bDescriptorType != USB_DT_ENDPOINT) { + pr_err("%s: failed at line=%d\n", __func__, __LINE__); + return -EINVAL; + } + dev = ep->dev; + if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) { + ret = -ESHUTDOWN; + goto print_err; + } + + /* erratum 0119 workaround ties up an endpoint number */ + if ((desc->bEndpointAddress & 0x0f) == EP_DONTUSE) { + ret = -EDOM; + goto print_err; + } + + if (dev->quirks & PLX_PCIE) { + if ((desc->bEndpointAddress & 0x0f) >= 0x0c) { + ret = -EDOM; + goto print_err; + } + ep->is_in = !!usb_endpoint_dir_in(desc); + if (dev->enhanced_mode && ep->is_in && ep_key[ep->num]) { + ret = -EINVAL; + goto print_err; + } + } + + /* sanity check ep-e/ep-f since their fifos are small */ + max = usb_endpoint_maxp(desc); + if (ep->num > 4 && max > 64 && (dev->quirks & PLX_LEGACY)) { + ret = -ERANGE; + goto print_err; + } + + spin_lock_irqsave(&dev->lock, flags); + _ep->maxpacket = max; + ep->desc = desc; + + /* ep_reset() has already been called */ + ep->stopped = 0; + ep->wedged = 0; + ep->out_overflow = 0; + + /* set speed-dependent max packet; may kick in high bandwidth */ + set_max_speed(ep, max); + + /* set type, direction, address; reset fifo counters */ + writel(BIT(FIFO_FLUSH), &ep->regs->ep_stat); + + if ((dev->quirks & PLX_PCIE) && dev->enhanced_mode) { + tmp = readl(&ep->cfg->ep_cfg); + /* If USB ep number doesn't match hardware ep number */ + if ((tmp & 0xf) != usb_endpoint_num(desc)) { + ret = -EINVAL; + spin_unlock_irqrestore(&dev->lock, flags); + goto print_err; + } + if (ep->is_in) + tmp &= ~USB3380_EP_CFG_MASK_IN; + else + tmp &= ~USB3380_EP_CFG_MASK_OUT; + } + type = (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK); + if (type == USB_ENDPOINT_XFER_INT) { + /* erratum 0105 workaround prevents hs NYET */ + if (dev->chiprev == 0100 && + dev->gadget.speed == USB_SPEED_HIGH && + !(desc->bEndpointAddress & USB_DIR_IN)) + writel(BIT(CLEAR_NAK_OUT_PACKETS_MODE), + &ep->regs->ep_rsp); + } else if (type == USB_ENDPOINT_XFER_BULK) { + /* catch some particularly blatant driver bugs */ + if ((dev->gadget.speed == USB_SPEED_SUPER && max != 1024) || + (dev->gadget.speed == USB_SPEED_HIGH && max != 512) || + (dev->gadget.speed == USB_SPEED_FULL && max > 64)) { + spin_unlock_irqrestore(&dev->lock, flags); + ret = -ERANGE; + goto print_err; + } + } + ep->is_iso = (type == USB_ENDPOINT_XFER_ISOC); + /* Enable this endpoint */ + if (dev->quirks & PLX_LEGACY) { + tmp |= type << ENDPOINT_TYPE; + tmp |= desc->bEndpointAddress; + /* default full fifo lines */ + tmp |= (4 << ENDPOINT_BYTE_COUNT); + tmp |= BIT(ENDPOINT_ENABLE); + ep->is_in = (tmp & USB_DIR_IN) != 0; + } else { + /* In Legacy mode, only OUT endpoints are used */ + if (dev->enhanced_mode && ep->is_in) { + tmp |= type << IN_ENDPOINT_TYPE; + tmp |= BIT(IN_ENDPOINT_ENABLE); + } else { + tmp |= type << OUT_ENDPOINT_TYPE; + tmp |= BIT(OUT_ENDPOINT_ENABLE); + tmp |= (ep->is_in << ENDPOINT_DIRECTION); + } + + tmp |= (4 << ENDPOINT_BYTE_COUNT); + if (!dev->enhanced_mode) + tmp |= usb_endpoint_num(desc); + tmp |= (ep->ep.maxburst << MAX_BURST_SIZE); + } + + /* Make sure all the registers are written before ep_rsp*/ + wmb(); + + /* for OUT transfers, block the rx fifo until a read is posted */ + if (!ep->is_in) + writel(BIT(SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp); + else if (!(dev->quirks & PLX_2280)) { + /* Added for 2282, Don't use nak packets on an in endpoint, + * this was ignored on 2280 + */ + writel(BIT(CLEAR_NAK_OUT_PACKETS) | + BIT(CLEAR_NAK_OUT_PACKETS_MODE), &ep->regs->ep_rsp); + } + + if (dev->quirks & PLX_PCIE) + ep_clear_seqnum(ep); + writel(tmp, &ep->cfg->ep_cfg); + + /* enable irqs */ + if (!ep->dma) { /* pio, per-packet */ + enable_pciirqenb(ep); + + tmp = BIT(DATA_PACKET_RECEIVED_INTERRUPT_ENABLE) | + BIT(DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE); + if (dev->quirks & PLX_2280) + tmp |= readl(&ep->regs->ep_irqenb); + writel(tmp, &ep->regs->ep_irqenb); + } else { /* dma, per-request */ + tmp = BIT((8 + ep->num)); /* completion */ + tmp |= readl(&dev->regs->pciirqenb1); + writel(tmp, &dev->regs->pciirqenb1); + + /* for short OUT transfers, dma completions can't + * advance the queue; do it pio-style, by hand. + * NOTE erratum 0112 workaround #2 + */ + if ((desc->bEndpointAddress & USB_DIR_IN) == 0) { + tmp = BIT(SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE); + writel(tmp, &ep->regs->ep_irqenb); + + enable_pciirqenb(ep); + } + } + + tmp = desc->bEndpointAddress; + ep_dbg(dev, "enabled %s (ep%d%s-%s) %s max %04x\n", + _ep->name, tmp & 0x0f, DIR_STRING(tmp), + type_string(desc->bmAttributes), + ep->dma ? "dma" : "pio", max); + + /* pci writes may still be posted */ + spin_unlock_irqrestore(&dev->lock, flags); + return ret; + +print_err: + dev_err(&ep->dev->pdev->dev, "%s: error=%d\n", __func__, ret); + return ret; +} + +static int handshake(u32 __iomem *ptr, u32 mask, u32 done, int usec) +{ + u32 result; + int ret; + + ret = readl_poll_timeout_atomic(ptr, result, + ((result & mask) == done || + result == U32_MAX), + 1, usec); + if (result == U32_MAX) /* device unplugged */ + return -ENODEV; + + return ret; +} + +static const struct usb_ep_ops net2280_ep_ops; + +static void ep_reset_228x(struct net2280_regs __iomem *regs, + struct net2280_ep *ep) +{ + u32 tmp; + + ep->desc = NULL; + INIT_LIST_HEAD(&ep->queue); + + usb_ep_set_maxpacket_limit(&ep->ep, ~0); + ep->ep.ops = &net2280_ep_ops; + + /* disable the dma, irqs, endpoint... */ + if (ep->dma) { + writel(0, &ep->dma->dmactl); + writel(BIT(DMA_SCATTER_GATHER_DONE_INTERRUPT) | + BIT(DMA_TRANSACTION_DONE_INTERRUPT) | + BIT(DMA_ABORT), + &ep->dma->dmastat); + + tmp = readl(®s->pciirqenb0); + tmp &= ~BIT(ep->num); + writel(tmp, ®s->pciirqenb0); + } else { + tmp = readl(®s->pciirqenb1); + tmp &= ~BIT((8 + ep->num)); /* completion */ + writel(tmp, ®s->pciirqenb1); + } + writel(0, &ep->regs->ep_irqenb); + + /* init to our chosen defaults, notably so that we NAK OUT + * packets until the driver queues a read (+note erratum 0112) + */ + if (!ep->is_in || (ep->dev->quirks & PLX_2280)) { + tmp = BIT(SET_NAK_OUT_PACKETS_MODE) | + BIT(SET_NAK_OUT_PACKETS) | + BIT(CLEAR_EP_HIDE_STATUS_PHASE) | + BIT(CLEAR_INTERRUPT_MODE); + } else { + /* added for 2282 */ + tmp = BIT(CLEAR_NAK_OUT_PACKETS_MODE) | + BIT(CLEAR_NAK_OUT_PACKETS) | + BIT(CLEAR_EP_HIDE_STATUS_PHASE) | + BIT(CLEAR_INTERRUPT_MODE); + } + + if (ep->num != 0) { + tmp |= BIT(CLEAR_ENDPOINT_TOGGLE) | + BIT(CLEAR_ENDPOINT_HALT); + } + writel(tmp, &ep->regs->ep_rsp); + + /* scrub most status bits, and flush any fifo state */ + if (ep->dev->quirks & PLX_2280) + tmp = BIT(FIFO_OVERFLOW) | + BIT(FIFO_UNDERFLOW); + else + tmp = 0; + + writel(tmp | BIT(TIMEOUT) | + BIT(USB_STALL_SENT) | + BIT(USB_IN_NAK_SENT) | + BIT(USB_IN_ACK_RCVD) | + BIT(USB_OUT_PING_NAK_SENT) | + BIT(USB_OUT_ACK_SENT) | + BIT(FIFO_FLUSH) | + BIT(SHORT_PACKET_OUT_DONE_INTERRUPT) | + BIT(SHORT_PACKET_TRANSFERRED_INTERRUPT) | + BIT(DATA_PACKET_RECEIVED_INTERRUPT) | + BIT(DATA_PACKET_TRANSMITTED_INTERRUPT) | + BIT(DATA_OUT_PING_TOKEN_INTERRUPT) | + BIT(DATA_IN_TOKEN_INTERRUPT), + &ep->regs->ep_stat); + + /* fifo size is handled separately */ +} + +static void ep_reset_338x(struct net2280_regs __iomem *regs, + struct net2280_ep *ep) +{ + u32 tmp, dmastat; + + ep->desc = NULL; + INIT_LIST_HEAD(&ep->queue); + + usb_ep_set_maxpacket_limit(&ep->ep, ~0); + ep->ep.ops = &net2280_ep_ops; + + /* disable the dma, irqs, endpoint... */ + if (ep->dma) { + writel(0, &ep->dma->dmactl); + writel(BIT(DMA_ABORT_DONE_INTERRUPT) | + BIT(DMA_PAUSE_DONE_INTERRUPT) | + BIT(DMA_SCATTER_GATHER_DONE_INTERRUPT) | + BIT(DMA_TRANSACTION_DONE_INTERRUPT), + /* | BIT(DMA_ABORT), */ + &ep->dma->dmastat); + + dmastat = readl(&ep->dma->dmastat); + if (dmastat == 0x5002) { + ep_warn(ep->dev, "The dmastat return = %x!!\n", + dmastat); + writel(0x5a, &ep->dma->dmastat); + } + + tmp = readl(®s->pciirqenb0); + tmp &= ~BIT(ep_bit[ep->num]); + writel(tmp, ®s->pciirqenb0); + } else { + if (ep->num < 5) { + tmp = readl(®s->pciirqenb1); + tmp &= ~BIT((8 + ep->num)); /* completion */ + writel(tmp, ®s->pciirqenb1); + } + } + writel(0, &ep->regs->ep_irqenb); + + writel(BIT(SHORT_PACKET_OUT_DONE_INTERRUPT) | + BIT(SHORT_PACKET_TRANSFERRED_INTERRUPT) | + BIT(FIFO_OVERFLOW) | + BIT(DATA_PACKET_RECEIVED_INTERRUPT) | + BIT(DATA_PACKET_TRANSMITTED_INTERRUPT) | + BIT(DATA_OUT_PING_TOKEN_INTERRUPT) | + BIT(DATA_IN_TOKEN_INTERRUPT), &ep->regs->ep_stat); + + tmp = readl(&ep->cfg->ep_cfg); + if (ep->is_in) + tmp &= ~USB3380_EP_CFG_MASK_IN; + else + tmp &= ~USB3380_EP_CFG_MASK_OUT; + writel(tmp, &ep->cfg->ep_cfg); +} + +static void nuke(struct net2280_ep *); + +static int net2280_disable(struct usb_ep *_ep) +{ + struct net2280_ep *ep; + unsigned long flags; + + ep = container_of(_ep, struct net2280_ep, ep); + if (!_ep || _ep->name == ep0name) { + pr_err("%s: Invalid ep=%p\n", __func__, _ep); + return -EINVAL; + } + spin_lock_irqsave(&ep->dev->lock, flags); + nuke(ep); + + if (ep->dev->quirks & PLX_PCIE) + ep_reset_338x(ep->dev->regs, ep); + else + ep_reset_228x(ep->dev->regs, ep); + + ep_vdbg(ep->dev, "disabled %s %s\n", + ep->dma ? "dma" : "pio", _ep->name); + + /* synch memory views with the device */ + (void)readl(&ep->cfg->ep_cfg); + + if (!ep->dma && ep->num >= 1 && ep->num <= 4) + ep->dma = &ep->dev->dma[ep->num - 1]; + + spin_unlock_irqrestore(&ep->dev->lock, flags); + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static struct usb_request +*net2280_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) +{ + struct net2280_ep *ep; + struct net2280_request *req; + + if (!_ep) { + pr_err("%s: Invalid ep\n", __func__); + return NULL; + } + ep = container_of(_ep, struct net2280_ep, ep); + + req = kzalloc(sizeof(*req), gfp_flags); + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->queue); + + /* this dma descriptor may be swapped with the previous dummy */ + if (ep->dma) { + struct net2280_dma *td; + + td = dma_pool_alloc(ep->dev->requests, gfp_flags, + &req->td_dma); + if (!td) { + kfree(req); + return NULL; + } + td->dmacount = 0; /* not VALID */ + td->dmadesc = td->dmaaddr; + req->td = td; + } + return &req->req; +} + +static void net2280_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct net2280_ep *ep; + struct net2280_request *req; + + ep = container_of(_ep, struct net2280_ep, ep); + if (!_ep || !_req) { + dev_err(&ep->dev->pdev->dev, "%s: Invalid ep=%p or req=%p\n", + __func__, _ep, _req); + return; + } + + req = container_of(_req, struct net2280_request, req); + WARN_ON(!list_empty(&req->queue)); + if (req->td) + dma_pool_free(ep->dev->requests, req->td, req->td_dma); + kfree(req); +} + +/*-------------------------------------------------------------------------*/ + +/* load a packet into the fifo we use for usb IN transfers. + * works for all endpoints. + * + * NOTE: pio with ep-a..ep-d could stuff multiple packets into the fifo + * at a time, but this code is simpler because it knows it only writes + * one packet. ep-a..ep-d should use dma instead. + */ +static void write_fifo(struct net2280_ep *ep, struct usb_request *req) +{ + struct net2280_ep_regs __iomem *regs = ep->regs; + u8 *buf; + u32 tmp; + unsigned count, total; + + /* INVARIANT: fifo is currently empty. (testable) */ + + if (req) { + buf = req->buf + req->actual; + prefetch(buf); + total = req->length - req->actual; + } else { + total = 0; + buf = NULL; + } + + /* write just one packet at a time */ + count = ep->ep.maxpacket; + if (count > total) /* min() cannot be used on a bitfield */ + count = total; + + ep_vdbg(ep->dev, "write %s fifo (IN) %d bytes%s req %p\n", + ep->ep.name, count, + (count != ep->ep.maxpacket) ? " (short)" : "", + req); + while (count >= 4) { + /* NOTE be careful if you try to align these. fifo lines + * should normally be full (4 bytes) and successive partial + * lines are ok only in certain cases. + */ + tmp = get_unaligned((u32 *)buf); + cpu_to_le32s(&tmp); + writel(tmp, ®s->ep_data); + buf += 4; + count -= 4; + } + + /* last fifo entry is "short" unless we wrote a full packet. + * also explicitly validate last word in (periodic) transfers + * when maxpacket is not a multiple of 4 bytes. + */ + if (count || total < ep->ep.maxpacket) { + tmp = count ? get_unaligned((u32 *)buf) : count; + cpu_to_le32s(&tmp); + set_fifo_bytecount(ep, count & 0x03); + writel(tmp, ®s->ep_data); + } + + /* pci writes may still be posted */ +} + +/* work around erratum 0106: PCI and USB race over the OUT fifo. + * caller guarantees chiprev 0100, out endpoint is NAKing, and + * there's no real data in the fifo. + * + * NOTE: also used in cases where that erratum doesn't apply: + * where the host wrote "too much" data to us. + */ +static void out_flush(struct net2280_ep *ep) +{ + u32 __iomem *statp; + u32 tmp; + + statp = &ep->regs->ep_stat; + + tmp = readl(statp); + if (tmp & BIT(NAK_OUT_PACKETS)) { + ep_dbg(ep->dev, "%s %s %08x !NAK\n", + ep->ep.name, __func__, tmp); + writel(BIT(SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp); + } + + writel(BIT(DATA_OUT_PING_TOKEN_INTERRUPT) | + BIT(DATA_PACKET_RECEIVED_INTERRUPT), + statp); + writel(BIT(FIFO_FLUSH), statp); + /* Make sure that stap is written */ + mb(); + tmp = readl(statp); + if (tmp & BIT(DATA_OUT_PING_TOKEN_INTERRUPT) && + /* high speed did bulk NYET; fifo isn't filling */ + ep->dev->gadget.speed == USB_SPEED_FULL) { + unsigned usec; + + usec = 50; /* 64 byte bulk/interrupt */ + handshake(statp, BIT(USB_OUT_PING_NAK_SENT), + BIT(USB_OUT_PING_NAK_SENT), usec); + /* NAK done; now CLEAR_NAK_OUT_PACKETS is safe */ + } +} + +/* unload packet(s) from the fifo we use for usb OUT transfers. + * returns true iff the request completed, because of short packet + * or the request buffer having filled with full packets. + * + * for ep-a..ep-d this will read multiple packets out when they + * have been accepted. + */ +static int read_fifo(struct net2280_ep *ep, struct net2280_request *req) +{ + struct net2280_ep_regs __iomem *regs = ep->regs; + u8 *buf = req->req.buf + req->req.actual; + unsigned count, tmp, is_short; + unsigned cleanup = 0, prevent = 0; + + /* erratum 0106 ... packets coming in during fifo reads might + * be incompletely rejected. not all cases have workarounds. + */ + if (ep->dev->chiprev == 0x0100 && + ep->dev->gadget.speed == USB_SPEED_FULL) { + udelay(1); + tmp = readl(&ep->regs->ep_stat); + if ((tmp & BIT(NAK_OUT_PACKETS))) + cleanup = 1; + else if ((tmp & BIT(FIFO_FULL))) { + start_out_naking(ep); + prevent = 1; + } + /* else: hope we don't see the problem */ + } + + /* never overflow the rx buffer. the fifo reads packets until + * it sees a short one; we might not be ready for them all. + */ + prefetchw(buf); + count = readl(®s->ep_avail); + if (unlikely(count == 0)) { + udelay(1); + tmp = readl(&ep->regs->ep_stat); + count = readl(®s->ep_avail); + /* handled that data already? */ + if (count == 0 && (tmp & BIT(NAK_OUT_PACKETS)) == 0) + return 0; + } + + tmp = req->req.length - req->req.actual; + if (count > tmp) { + /* as with DMA, data overflow gets flushed */ + if ((tmp % ep->ep.maxpacket) != 0) { + ep_err(ep->dev, + "%s out fifo %d bytes, expected %d\n", + ep->ep.name, count, tmp); + req->req.status = -EOVERFLOW; + cleanup = 1; + /* NAK_OUT_PACKETS will be set, so flushing is safe; + * the next read will start with the next packet + */ + } /* else it's a ZLP, no worries */ + count = tmp; + } + req->req.actual += count; + + is_short = (count == 0) || ((count % ep->ep.maxpacket) != 0); + + ep_vdbg(ep->dev, "read %s fifo (OUT) %d bytes%s%s%s req %p %d/%d\n", + ep->ep.name, count, is_short ? " (short)" : "", + cleanup ? " flush" : "", prevent ? " nak" : "", + req, req->req.actual, req->req.length); + + while (count >= 4) { + tmp = readl(®s->ep_data); + cpu_to_le32s(&tmp); + put_unaligned(tmp, (u32 *)buf); + buf += 4; + count -= 4; + } + if (count) { + tmp = readl(®s->ep_data); + /* LE conversion is implicit here: */ + do { + *buf++ = (u8) tmp; + tmp >>= 8; + } while (--count); + } + if (cleanup) + out_flush(ep); + if (prevent) { + writel(BIT(CLEAR_NAK_OUT_PACKETS), &ep->regs->ep_rsp); + (void) readl(&ep->regs->ep_rsp); + } + + return is_short || req->req.actual == req->req.length; +} + +/* fill out dma descriptor to match a given request */ +static void fill_dma_desc(struct net2280_ep *ep, + struct net2280_request *req, int valid) +{ + struct net2280_dma *td = req->td; + u32 dmacount = req->req.length; + + /* don't let DMA continue after a short OUT packet, + * so overruns can't affect the next transfer. + * in case of overruns on max-size packets, we can't + * stop the fifo from filling but we can flush it. + */ + if (ep->is_in) + dmacount |= BIT(DMA_DIRECTION); + if ((!ep->is_in && (dmacount % ep->ep.maxpacket) != 0) || + !(ep->dev->quirks & PLX_2280)) + dmacount |= BIT(END_OF_CHAIN); + + req->valid = valid; + if (valid) + dmacount |= BIT(VALID_BIT); + dmacount |= BIT(DMA_DONE_INTERRUPT_ENABLE); + + /* td->dmadesc = previously set by caller */ + td->dmaaddr = cpu_to_le32 (req->req.dma); + + /* 2280 may be polling VALID_BIT through ep->dma->dmadesc */ + wmb(); + td->dmacount = cpu_to_le32(dmacount); +} + +static const u32 dmactl_default = + BIT(DMA_SCATTER_GATHER_DONE_INTERRUPT) | + BIT(DMA_CLEAR_COUNT_ENABLE) | + /* erratum 0116 workaround part 1 (use POLLING) */ + (POLL_100_USEC << DESCRIPTOR_POLLING_RATE) | + BIT(DMA_VALID_BIT_POLLING_ENABLE) | + BIT(DMA_VALID_BIT_ENABLE) | + BIT(DMA_SCATTER_GATHER_ENABLE) | + /* erratum 0116 workaround part 2 (no AUTOSTART) */ + BIT(DMA_ENABLE); + +static inline void spin_stop_dma(struct net2280_dma_regs __iomem *dma) +{ + handshake(&dma->dmactl, BIT(DMA_ENABLE), 0, 50); +} + +static inline void stop_dma(struct net2280_dma_regs __iomem *dma) +{ + writel(readl(&dma->dmactl) & ~BIT(DMA_ENABLE), &dma->dmactl); + spin_stop_dma(dma); +} + +static void start_queue(struct net2280_ep *ep, u32 dmactl, u32 td_dma) +{ + struct net2280_dma_regs __iomem *dma = ep->dma; + unsigned int tmp = BIT(VALID_BIT) | (ep->is_in << DMA_DIRECTION); + + if (!(ep->dev->quirks & PLX_2280)) + tmp |= BIT(END_OF_CHAIN); + + writel(tmp, &dma->dmacount); + writel(readl(&dma->dmastat), &dma->dmastat); + + writel(td_dma, &dma->dmadesc); + if (ep->dev->quirks & PLX_PCIE) + dmactl |= BIT(DMA_REQUEST_OUTSTANDING); + writel(dmactl, &dma->dmactl); + + /* erratum 0116 workaround part 3: pci arbiter away from net2280 */ + (void) readl(&ep->dev->pci->pcimstctl); + + writel(BIT(DMA_START), &dma->dmastat); +} + +static void start_dma(struct net2280_ep *ep, struct net2280_request *req) +{ + u32 tmp; + struct net2280_dma_regs __iomem *dma = ep->dma; + + /* FIXME can't use DMA for ZLPs */ + + /* on this path we "know" there's no dma active (yet) */ + WARN_ON(readl(&dma->dmactl) & BIT(DMA_ENABLE)); + writel(0, &ep->dma->dmactl); + + /* previous OUT packet might have been short */ + if (!ep->is_in && (readl(&ep->regs->ep_stat) & + BIT(NAK_OUT_PACKETS))) { + writel(BIT(SHORT_PACKET_TRANSFERRED_INTERRUPT), + &ep->regs->ep_stat); + + tmp = readl(&ep->regs->ep_avail); + if (tmp) { + writel(readl(&dma->dmastat), &dma->dmastat); + + /* transfer all/some fifo data */ + writel(req->req.dma, &dma->dmaaddr); + tmp = min(tmp, req->req.length); + + /* dma irq, faking scatterlist status */ + req->td->dmacount = cpu_to_le32(req->req.length - tmp); + writel(BIT(DMA_DONE_INTERRUPT_ENABLE) | tmp, + &dma->dmacount); + req->td->dmadesc = 0; + req->valid = 1; + + writel(BIT(DMA_ENABLE), &dma->dmactl); + writel(BIT(DMA_START), &dma->dmastat); + return; + } + stop_out_naking(ep); + } + + tmp = dmactl_default; + + /* force packet boundaries between dma requests, but prevent the + * controller from automagically writing a last "short" packet + * (zero length) unless the driver explicitly said to do that. + */ + if (ep->is_in) { + if (likely((req->req.length % ep->ep.maxpacket) || + req->req.zero)){ + tmp |= BIT(DMA_FIFO_VALIDATE); + ep->in_fifo_validate = 1; + } else + ep->in_fifo_validate = 0; + } + + /* init req->td, pointing to the current dummy */ + req->td->dmadesc = cpu_to_le32 (ep->td_dma); + fill_dma_desc(ep, req, 1); + + req->td->dmacount |= cpu_to_le32(BIT(END_OF_CHAIN)); + + start_queue(ep, tmp, req->td_dma); +} + +static inline void +queue_dma(struct net2280_ep *ep, struct net2280_request *req, int valid) +{ + /* swap new dummy for old, link; fill and maybe activate */ + swap(ep->dummy, req->td); + swap(ep->td_dma, req->td_dma); + + req->td->dmadesc = cpu_to_le32 (ep->td_dma); + + fill_dma_desc(ep, req, valid); +} + +static void +done(struct net2280_ep *ep, struct net2280_request *req, int status) +{ + struct net2280 *dev; + unsigned stopped = ep->stopped; + + list_del_init(&req->queue); + + if (req->req.status == -EINPROGRESS) + req->req.status = status; + else + status = req->req.status; + + dev = ep->dev; + if (ep->dma) + usb_gadget_unmap_request(&dev->gadget, &req->req, ep->is_in); + + if (status && status != -ESHUTDOWN) + ep_vdbg(dev, "complete %s req %p stat %d len %u/%u\n", + ep->ep.name, &req->req, status, + req->req.actual, req->req.length); + + /* don't modify queue heads during completion callback */ + ep->stopped = 1; + spin_unlock(&dev->lock); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&dev->lock); + ep->stopped = stopped; +} + +/*-------------------------------------------------------------------------*/ + +static int +net2280_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) +{ + struct net2280_request *req; + struct net2280_ep *ep; + struct net2280 *dev; + unsigned long flags; + int ret = 0; + + /* we always require a cpu-view buffer, so that we can + * always use pio (as fallback or whatever). + */ + ep = container_of(_ep, struct net2280_ep, ep); + if (!_ep || (!ep->desc && ep->num != 0)) { + pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep); + return -EINVAL; + } + req = container_of(_req, struct net2280_request, req); + if (!_req || !_req->complete || !_req->buf || + !list_empty(&req->queue)) { + ret = -EINVAL; + goto print_err; + } + if (_req->length > (~0 & DMA_BYTE_COUNT_MASK)) { + ret = -EDOM; + goto print_err; + } + dev = ep->dev; + if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) { + ret = -ESHUTDOWN; + goto print_err; + } + + /* FIXME implement PIO fallback for ZLPs with DMA */ + if (ep->dma && _req->length == 0) { + ret = -EOPNOTSUPP; + goto print_err; + } + + /* set up dma mapping in case the caller didn't */ + if (ep->dma) { + ret = usb_gadget_map_request(&dev->gadget, _req, + ep->is_in); + if (ret) + goto print_err; + } + + ep_vdbg(dev, "%s queue req %p, len %d buf %p\n", + _ep->name, _req, _req->length, _req->buf); + + spin_lock_irqsave(&dev->lock, flags); + + _req->status = -EINPROGRESS; + _req->actual = 0; + + /* kickstart this i/o queue? */ + if (list_empty(&ep->queue) && !ep->stopped && + !((dev->quirks & PLX_PCIE) && ep->dma && + (readl(&ep->regs->ep_rsp) & BIT(CLEAR_ENDPOINT_HALT)))) { + + /* use DMA if the endpoint supports it, else pio */ + if (ep->dma) + start_dma(ep, req); + else { + /* maybe there's no control data, just status ack */ + if (ep->num == 0 && _req->length == 0) { + allow_status(ep); + done(ep, req, 0); + ep_vdbg(dev, "%s status ack\n", ep->ep.name); + goto done; + } + + /* PIO ... stuff the fifo, or unblock it. */ + if (ep->is_in) + write_fifo(ep, _req); + else { + u32 s; + + /* OUT FIFO might have packet(s) buffered */ + s = readl(&ep->regs->ep_stat); + if ((s & BIT(FIFO_EMPTY)) == 0) { + /* note: _req->short_not_ok is + * ignored here since PIO _always_ + * stops queue advance here, and + * _req->status doesn't change for + * short reads (only _req->actual) + */ + if (read_fifo(ep, req) && + ep->num == 0) { + done(ep, req, 0); + allow_status(ep); + /* don't queue it */ + req = NULL; + } else if (read_fifo(ep, req) && + ep->num != 0) { + done(ep, req, 0); + req = NULL; + } else + s = readl(&ep->regs->ep_stat); + } + + /* don't NAK, let the fifo fill */ + if (req && (s & BIT(NAK_OUT_PACKETS))) + writel(BIT(CLEAR_NAK_OUT_PACKETS), + &ep->regs->ep_rsp); + } + } + + } else if (ep->dma) { + int valid = 1; + + if (ep->is_in) { + int expect; + + /* preventing magic zlps is per-engine state, not + * per-transfer; irq logic must recover hiccups. + */ + expect = likely(req->req.zero || + (req->req.length % ep->ep.maxpacket)); + if (expect != ep->in_fifo_validate) + valid = 0; + } + queue_dma(ep, req, valid); + + } /* else the irq handler advances the queue. */ + + ep->responded = 1; + if (req) + list_add_tail(&req->queue, &ep->queue); +done: + spin_unlock_irqrestore(&dev->lock, flags); + + /* pci writes may still be posted */ + return ret; + +print_err: + dev_err(&ep->dev->pdev->dev, "%s: error=%d\n", __func__, ret); + return ret; +} + +static inline void +dma_done(struct net2280_ep *ep, struct net2280_request *req, u32 dmacount, + int status) +{ + req->req.actual = req->req.length - (DMA_BYTE_COUNT_MASK & dmacount); + done(ep, req, status); +} + +static int scan_dma_completions(struct net2280_ep *ep) +{ + int num_completed = 0; + + /* only look at descriptors that were "naturally" retired, + * so fifo and list head state won't matter + */ + while (!list_empty(&ep->queue)) { + struct net2280_request *req; + u32 req_dma_count; + + req = list_entry(ep->queue.next, + struct net2280_request, queue); + if (!req->valid) + break; + rmb(); + req_dma_count = le32_to_cpup(&req->td->dmacount); + if ((req_dma_count & BIT(VALID_BIT)) != 0) + break; + + /* SHORT_PACKET_TRANSFERRED_INTERRUPT handles "usb-short" + * cases where DMA must be aborted; this code handles + * all non-abort DMA completions. + */ + if (unlikely(req->td->dmadesc == 0)) { + /* paranoia */ + u32 const ep_dmacount = readl(&ep->dma->dmacount); + + if (ep_dmacount & DMA_BYTE_COUNT_MASK) + break; + /* single transfer mode */ + dma_done(ep, req, req_dma_count, 0); + num_completed++; + break; + } else if (!ep->is_in && + (req->req.length % ep->ep.maxpacket) && + !(ep->dev->quirks & PLX_PCIE)) { + + u32 const ep_stat = readl(&ep->regs->ep_stat); + /* AVOID TROUBLE HERE by not issuing short reads from + * your gadget driver. That helps avoids errata 0121, + * 0122, and 0124; not all cases trigger the warning. + */ + if ((ep_stat & BIT(NAK_OUT_PACKETS)) == 0) { + ep_warn(ep->dev, "%s lost packet sync!\n", + ep->ep.name); + req->req.status = -EOVERFLOW; + } else { + u32 const ep_avail = readl(&ep->regs->ep_avail); + if (ep_avail) { + /* fifo gets flushed later */ + ep->out_overflow = 1; + ep_dbg(ep->dev, + "%s dma, discard %d len %d\n", + ep->ep.name, ep_avail, + req->req.length); + req->req.status = -EOVERFLOW; + } + } + } + dma_done(ep, req, req_dma_count, 0); + num_completed++; + } + + return num_completed; +} + +static void restart_dma(struct net2280_ep *ep) +{ + struct net2280_request *req; + + if (ep->stopped) + return; + req = list_entry(ep->queue.next, struct net2280_request, queue); + + start_dma(ep, req); +} + +static void abort_dma(struct net2280_ep *ep) +{ + /* abort the current transfer */ + if (likely(!list_empty(&ep->queue))) { + /* FIXME work around errata 0121, 0122, 0124 */ + writel(BIT(DMA_ABORT), &ep->dma->dmastat); + spin_stop_dma(ep->dma); + } else + stop_dma(ep->dma); + scan_dma_completions(ep); +} + +/* dequeue ALL requests */ +static void nuke(struct net2280_ep *ep) +{ + struct net2280_request *req; + + /* called with spinlock held */ + ep->stopped = 1; + if (ep->dma) + abort_dma(ep); + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, + struct net2280_request, + queue); + done(ep, req, -ESHUTDOWN); + } +} + +/* dequeue JUST ONE request */ +static int net2280_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct net2280_ep *ep; + struct net2280_request *req = NULL; + struct net2280_request *iter; + unsigned long flags; + u32 dmactl; + int stopped; + + ep = container_of(_ep, struct net2280_ep, ep); + if (!_ep || (!ep->desc && ep->num != 0) || !_req) { + pr_err("%s: Invalid ep=%p or ep->desc or req=%p\n", + __func__, _ep, _req); + return -EINVAL; + } + + spin_lock_irqsave(&ep->dev->lock, flags); + stopped = ep->stopped; + + /* quiesce dma while we patch the queue */ + dmactl = 0; + ep->stopped = 1; + if (ep->dma) { + dmactl = readl(&ep->dma->dmactl); + /* WARNING erratum 0127 may kick in ... */ + stop_dma(ep->dma); + scan_dma_completions(ep); + } + + /* make sure it's still queued on this endpoint */ + list_for_each_entry(iter, &ep->queue, queue) { + if (&iter->req != _req) + continue; + req = iter; + break; + } + if (!req) { + ep->stopped = stopped; + spin_unlock_irqrestore(&ep->dev->lock, flags); + ep_dbg(ep->dev, "%s: Request mismatch\n", __func__); + return -EINVAL; + } + + /* queue head may be partially complete. */ + if (ep->queue.next == &req->queue) { + if (ep->dma) { + ep_dbg(ep->dev, "unlink (%s) dma\n", _ep->name); + _req->status = -ECONNRESET; + abort_dma(ep); + if (likely(ep->queue.next == &req->queue)) { + /* NOTE: misreports single-transfer mode*/ + req->td->dmacount = 0; /* invalidate */ + dma_done(ep, req, + readl(&ep->dma->dmacount), + -ECONNRESET); + } + } else { + ep_dbg(ep->dev, "unlink (%s) pio\n", _ep->name); + done(ep, req, -ECONNRESET); + } + req = NULL; + } + + if (req) + done(ep, req, -ECONNRESET); + ep->stopped = stopped; + + if (ep->dma) { + /* turn off dma on inactive queues */ + if (list_empty(&ep->queue)) + stop_dma(ep->dma); + else if (!ep->stopped) { + /* resume current request, or start new one */ + if (req) + writel(dmactl, &ep->dma->dmactl); + else + start_dma(ep, list_entry(ep->queue.next, + struct net2280_request, queue)); + } + } + + spin_unlock_irqrestore(&ep->dev->lock, flags); + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static int net2280_fifo_status(struct usb_ep *_ep); + +static int +net2280_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged) +{ + struct net2280_ep *ep; + unsigned long flags; + int retval = 0; + + ep = container_of(_ep, struct net2280_ep, ep); + if (!_ep || (!ep->desc && ep->num != 0)) { + pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep); + return -EINVAL; + } + if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) { + retval = -ESHUTDOWN; + goto print_err; + } + if (ep->desc /* not ep0 */ && (ep->desc->bmAttributes & 0x03) + == USB_ENDPOINT_XFER_ISOC) { + retval = -EINVAL; + goto print_err; + } + + spin_lock_irqsave(&ep->dev->lock, flags); + if (!list_empty(&ep->queue)) { + retval = -EAGAIN; + goto print_unlock; + } else if (ep->is_in && value && net2280_fifo_status(_ep) != 0) { + retval = -EAGAIN; + goto print_unlock; + } else { + ep_vdbg(ep->dev, "%s %s %s\n", _ep->name, + value ? "set" : "clear", + wedged ? "wedge" : "halt"); + /* set/clear, then synch memory views with the device */ + if (value) { + if (ep->num == 0) + ep->dev->protocol_stall = 1; + else + set_halt(ep); + if (wedged) + ep->wedged = 1; + } else { + clear_halt(ep); + if (ep->dev->quirks & PLX_PCIE && + !list_empty(&ep->queue) && ep->td_dma) + restart_dma(ep); + ep->wedged = 0; + } + (void) readl(&ep->regs->ep_rsp); + } + spin_unlock_irqrestore(&ep->dev->lock, flags); + + return retval; + +print_unlock: + spin_unlock_irqrestore(&ep->dev->lock, flags); +print_err: + dev_err(&ep->dev->pdev->dev, "%s: error=%d\n", __func__, retval); + return retval; +} + +static int net2280_set_halt(struct usb_ep *_ep, int value) +{ + return net2280_set_halt_and_wedge(_ep, value, 0); +} + +static int net2280_set_wedge(struct usb_ep *_ep) +{ + if (!_ep || _ep->name == ep0name) { + pr_err("%s: Invalid ep=%p or ep0\n", __func__, _ep); + return -EINVAL; + } + return net2280_set_halt_and_wedge(_ep, 1, 1); +} + +static int net2280_fifo_status(struct usb_ep *_ep) +{ + struct net2280_ep *ep; + u32 avail; + + ep = container_of(_ep, struct net2280_ep, ep); + if (!_ep || (!ep->desc && ep->num != 0)) { + pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep); + return -ENODEV; + } + if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) { + dev_err(&ep->dev->pdev->dev, + "%s: Invalid driver=%p or speed=%d\n", + __func__, ep->dev->driver, ep->dev->gadget.speed); + return -ESHUTDOWN; + } + + avail = readl(&ep->regs->ep_avail) & (BIT(12) - 1); + if (avail > ep->fifo_size) { + dev_err(&ep->dev->pdev->dev, "%s: Fifo overflow\n", __func__); + return -EOVERFLOW; + } + if (ep->is_in) + avail = ep->fifo_size - avail; + return avail; +} + +static void net2280_fifo_flush(struct usb_ep *_ep) +{ + struct net2280_ep *ep; + + ep = container_of(_ep, struct net2280_ep, ep); + if (!_ep || (!ep->desc && ep->num != 0)) { + pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep); + return; + } + if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) { + dev_err(&ep->dev->pdev->dev, + "%s: Invalid driver=%p or speed=%d\n", + __func__, ep->dev->driver, ep->dev->gadget.speed); + return; + } + + writel(BIT(FIFO_FLUSH), &ep->regs->ep_stat); + (void) readl(&ep->regs->ep_rsp); +} + +static const struct usb_ep_ops net2280_ep_ops = { + .enable = net2280_enable, + .disable = net2280_disable, + + .alloc_request = net2280_alloc_request, + .free_request = net2280_free_request, + + .queue = net2280_queue, + .dequeue = net2280_dequeue, + + .set_halt = net2280_set_halt, + .set_wedge = net2280_set_wedge, + .fifo_status = net2280_fifo_status, + .fifo_flush = net2280_fifo_flush, +}; + +/*-------------------------------------------------------------------------*/ + +static int net2280_get_frame(struct usb_gadget *_gadget) +{ + struct net2280 *dev; + unsigned long flags; + u16 retval; + + if (!_gadget) + return -ENODEV; + dev = container_of(_gadget, struct net2280, gadget); + spin_lock_irqsave(&dev->lock, flags); + retval = get_idx_reg(dev->regs, REG_FRAME) & 0x03ff; + spin_unlock_irqrestore(&dev->lock, flags); + return retval; +} + +static int net2280_wakeup(struct usb_gadget *_gadget) +{ + struct net2280 *dev; + u32 tmp; + unsigned long flags; + + if (!_gadget) + return 0; + dev = container_of(_gadget, struct net2280, gadget); + + spin_lock_irqsave(&dev->lock, flags); + tmp = readl(&dev->usb->usbctl); + if (tmp & BIT(DEVICE_REMOTE_WAKEUP_ENABLE)) + writel(BIT(GENERATE_RESUME), &dev->usb->usbstat); + spin_unlock_irqrestore(&dev->lock, flags); + + /* pci writes may still be posted */ + return 0; +} + +static int net2280_set_selfpowered(struct usb_gadget *_gadget, int value) +{ + struct net2280 *dev; + u32 tmp; + unsigned long flags; + + if (!_gadget) + return 0; + dev = container_of(_gadget, struct net2280, gadget); + + spin_lock_irqsave(&dev->lock, flags); + tmp = readl(&dev->usb->usbctl); + if (value) { + tmp |= BIT(SELF_POWERED_STATUS); + _gadget->is_selfpowered = 1; + } else { + tmp &= ~BIT(SELF_POWERED_STATUS); + _gadget->is_selfpowered = 0; + } + writel(tmp, &dev->usb->usbctl); + spin_unlock_irqrestore(&dev->lock, flags); + + return 0; +} + +static int net2280_pullup(struct usb_gadget *_gadget, int is_on) +{ + struct net2280 *dev; + u32 tmp; + unsigned long flags; + + if (!_gadget) + return -ENODEV; + dev = container_of(_gadget, struct net2280, gadget); + + spin_lock_irqsave(&dev->lock, flags); + tmp = readl(&dev->usb->usbctl); + dev->softconnect = (is_on != 0); + if (is_on) { + ep0_start(dev); + writel(tmp | BIT(USB_DETECT_ENABLE), &dev->usb->usbctl); + } else { + writel(tmp & ~BIT(USB_DETECT_ENABLE), &dev->usb->usbctl); + stop_activity(dev, NULL); + } + + spin_unlock_irqrestore(&dev->lock, flags); + + return 0; +} + +static struct usb_ep *net2280_match_ep(struct usb_gadget *_gadget, + struct usb_endpoint_descriptor *desc, + struct usb_ss_ep_comp_descriptor *ep_comp) +{ + char name[8]; + struct usb_ep *ep; + + if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_INT) { + /* ep-e, ep-f are PIO with only 64 byte fifos */ + ep = gadget_find_ep_by_name(_gadget, "ep-e"); + if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp)) + return ep; + ep = gadget_find_ep_by_name(_gadget, "ep-f"); + if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp)) + return ep; + } + + /* USB3380: Only first four endpoints have DMA channels. Allocate + * slower interrupt endpoints from PIO hw endpoints, to allow bulk/isoc + * endpoints use DMA hw endpoints. + */ + if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_INT && + usb_endpoint_dir_in(desc)) { + ep = gadget_find_ep_by_name(_gadget, "ep2in"); + if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp)) + return ep; + ep = gadget_find_ep_by_name(_gadget, "ep4in"); + if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp)) + return ep; + } else if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_INT && + !usb_endpoint_dir_in(desc)) { + ep = gadget_find_ep_by_name(_gadget, "ep1out"); + if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp)) + return ep; + ep = gadget_find_ep_by_name(_gadget, "ep3out"); + if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp)) + return ep; + } else if (usb_endpoint_type(desc) != USB_ENDPOINT_XFER_BULK && + usb_endpoint_dir_in(desc)) { + ep = gadget_find_ep_by_name(_gadget, "ep1in"); + if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp)) + return ep; + ep = gadget_find_ep_by_name(_gadget, "ep3in"); + if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp)) + return ep; + } else if (usb_endpoint_type(desc) != USB_ENDPOINT_XFER_BULK && + !usb_endpoint_dir_in(desc)) { + ep = gadget_find_ep_by_name(_gadget, "ep2out"); + if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp)) + return ep; + ep = gadget_find_ep_by_name(_gadget, "ep4out"); + if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp)) + return ep; + } + + /* USB3380: use same address for usb and hardware endpoints */ + snprintf(name, sizeof(name), "ep%d%s", usb_endpoint_num(desc), + usb_endpoint_dir_in(desc) ? "in" : "out"); + ep = gadget_find_ep_by_name(_gadget, name); + if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp)) + return ep; + + return NULL; +} + +static int net2280_start(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver); +static int net2280_stop(struct usb_gadget *_gadget); +static void net2280_async_callbacks(struct usb_gadget *_gadget, bool enable); + +static const struct usb_gadget_ops net2280_ops = { + .get_frame = net2280_get_frame, + .wakeup = net2280_wakeup, + .set_selfpowered = net2280_set_selfpowered, + .pullup = net2280_pullup, + .udc_start = net2280_start, + .udc_stop = net2280_stop, + .udc_async_callbacks = net2280_async_callbacks, + .match_ep = net2280_match_ep, +}; + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + +/* FIXME move these into procfs, and use seq_file. + * Sysfs _still_ doesn't behave for arbitrarily sized files, + * and also doesn't help products using this with 2.4 kernels. + */ + +/* "function" sysfs attribute */ +static ssize_t function_show(struct device *_dev, struct device_attribute *attr, + char *buf) +{ + struct net2280 *dev = dev_get_drvdata(_dev); + + if (!dev->driver || !dev->driver->function || + strlen(dev->driver->function) > PAGE_SIZE) + return 0; + return scnprintf(buf, PAGE_SIZE, "%s\n", dev->driver->function); +} +static DEVICE_ATTR_RO(function); + +static ssize_t registers_show(struct device *_dev, + struct device_attribute *attr, char *buf) +{ + struct net2280 *dev; + char *next; + unsigned size, t; + unsigned long flags; + int i; + u32 t1, t2; + const char *s; + + dev = dev_get_drvdata(_dev); + next = buf; + size = PAGE_SIZE; + spin_lock_irqsave(&dev->lock, flags); + + if (dev->driver) + s = dev->driver->driver.name; + else + s = "(none)"; + + /* Main Control Registers */ + t = scnprintf(next, size, "%s version " DRIVER_VERSION + ", chiprev %04x\n\n" + "devinit %03x fifoctl %08x gadget '%s'\n" + "pci irqenb0 %02x irqenb1 %08x " + "irqstat0 %04x irqstat1 %08x\n", + driver_name, dev->chiprev, + readl(&dev->regs->devinit), + readl(&dev->regs->fifoctl), + s, + readl(&dev->regs->pciirqenb0), + readl(&dev->regs->pciirqenb1), + readl(&dev->regs->irqstat0), + readl(&dev->regs->irqstat1)); + size -= t; + next += t; + + /* USB Control Registers */ + t1 = readl(&dev->usb->usbctl); + t2 = readl(&dev->usb->usbstat); + if (t1 & BIT(VBUS_PIN)) { + if (t2 & BIT(HIGH_SPEED)) + s = "high speed"; + else if (dev->gadget.speed == USB_SPEED_UNKNOWN) + s = "powered"; + else + s = "full speed"; + /* full speed bit (6) not working?? */ + } else + s = "not attached"; + t = scnprintf(next, size, + "stdrsp %08x usbctl %08x usbstat %08x " + "addr 0x%02x (%s)\n", + readl(&dev->usb->stdrsp), t1, t2, + readl(&dev->usb->ouraddr), s); + size -= t; + next += t; + + /* PCI Master Control Registers */ + + /* DMA Control Registers */ + + /* Configurable EP Control Registers */ + for (i = 0; i < dev->n_ep; i++) { + struct net2280_ep *ep; + + ep = &dev->ep[i]; + if (i && !ep->desc) + continue; + + t1 = readl(&ep->cfg->ep_cfg); + t2 = readl(&ep->regs->ep_rsp) & 0xff; + t = scnprintf(next, size, + "\n%s\tcfg %05x rsp (%02x) %s%s%s%s%s%s%s%s" + "irqenb %02x\n", + ep->ep.name, t1, t2, + (t2 & BIT(CLEAR_NAK_OUT_PACKETS)) + ? "NAK " : "", + (t2 & BIT(CLEAR_EP_HIDE_STATUS_PHASE)) + ? "hide " : "", + (t2 & BIT(CLEAR_EP_FORCE_CRC_ERROR)) + ? "CRC " : "", + (t2 & BIT(CLEAR_INTERRUPT_MODE)) + ? "interrupt " : "", + (t2 & BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE)) + ? "status " : "", + (t2 & BIT(CLEAR_NAK_OUT_PACKETS_MODE)) + ? "NAKmode " : "", + (t2 & BIT(CLEAR_ENDPOINT_TOGGLE)) + ? "DATA1 " : "DATA0 ", + (t2 & BIT(CLEAR_ENDPOINT_HALT)) + ? "HALT " : "", + readl(&ep->regs->ep_irqenb)); + size -= t; + next += t; + + t = scnprintf(next, size, + "\tstat %08x avail %04x " + "(ep%d%s-%s)%s\n", + readl(&ep->regs->ep_stat), + readl(&ep->regs->ep_avail), + t1 & 0x0f, DIR_STRING(t1), + type_string(t1 >> 8), + ep->stopped ? "*" : ""); + size -= t; + next += t; + + if (!ep->dma) + continue; + + t = scnprintf(next, size, + " dma\tctl %08x stat %08x count %08x\n" + "\taddr %08x desc %08x\n", + readl(&ep->dma->dmactl), + readl(&ep->dma->dmastat), + readl(&ep->dma->dmacount), + readl(&ep->dma->dmaaddr), + readl(&ep->dma->dmadesc)); + size -= t; + next += t; + + } + + /* Indexed Registers (none yet) */ + + /* Statistics */ + t = scnprintf(next, size, "\nirqs: "); + size -= t; + next += t; + for (i = 0; i < dev->n_ep; i++) { + struct net2280_ep *ep; + + ep = &dev->ep[i]; + if (i && !ep->irqs) + continue; + t = scnprintf(next, size, " %s/%lu", ep->ep.name, ep->irqs); + size -= t; + next += t; + + } + t = scnprintf(next, size, "\n"); + size -= t; + next += t; + + spin_unlock_irqrestore(&dev->lock, flags); + + return PAGE_SIZE - size; +} +static DEVICE_ATTR_RO(registers); + +static ssize_t queues_show(struct device *_dev, struct device_attribute *attr, + char *buf) +{ + struct net2280 *dev; + char *next; + unsigned size; + unsigned long flags; + int i; + + dev = dev_get_drvdata(_dev); + next = buf; + size = PAGE_SIZE; + spin_lock_irqsave(&dev->lock, flags); + + for (i = 0; i < dev->n_ep; i++) { + struct net2280_ep *ep = &dev->ep[i]; + struct net2280_request *req; + int t; + + if (i != 0) { + const struct usb_endpoint_descriptor *d; + + d = ep->desc; + if (!d) + continue; + t = d->bEndpointAddress; + t = scnprintf(next, size, + "\n%s (ep%d%s-%s) max %04x %s fifo %d\n", + ep->ep.name, t & USB_ENDPOINT_NUMBER_MASK, + (t & USB_DIR_IN) ? "in" : "out", + type_string(d->bmAttributes), + usb_endpoint_maxp(d), + ep->dma ? "dma" : "pio", ep->fifo_size + ); + } else /* ep0 should only have one transfer queued */ + t = scnprintf(next, size, "ep0 max 64 pio %s\n", + ep->is_in ? "in" : "out"); + if (t <= 0 || t > size) + goto done; + size -= t; + next += t; + + if (list_empty(&ep->queue)) { + t = scnprintf(next, size, "\t(nothing queued)\n"); + if (t <= 0 || t > size) + goto done; + size -= t; + next += t; + continue; + } + list_for_each_entry(req, &ep->queue, queue) { + if (ep->dma && req->td_dma == readl(&ep->dma->dmadesc)) + t = scnprintf(next, size, + "\treq %p len %d/%d " + "buf %p (dmacount %08x)\n", + &req->req, req->req.actual, + req->req.length, req->req.buf, + readl(&ep->dma->dmacount)); + else + t = scnprintf(next, size, + "\treq %p len %d/%d buf %p\n", + &req->req, req->req.actual, + req->req.length, req->req.buf); + if (t <= 0 || t > size) + goto done; + size -= t; + next += t; + + if (ep->dma) { + struct net2280_dma *td; + + td = req->td; + t = scnprintf(next, size, "\t td %08x " + " count %08x buf %08x desc %08x\n", + (u32) req->td_dma, + le32_to_cpu(td->dmacount), + le32_to_cpu(td->dmaaddr), + le32_to_cpu(td->dmadesc)); + if (t <= 0 || t > size) + goto done; + size -= t; + next += t; + } + } + } + +done: + spin_unlock_irqrestore(&dev->lock, flags); + return PAGE_SIZE - size; +} +static DEVICE_ATTR_RO(queues); + + +#else + +#define device_create_file(a, b) (0) +#define device_remove_file(a, b) do { } while (0) + +#endif + +/*-------------------------------------------------------------------------*/ + +/* another driver-specific mode might be a request type doing dma + * to/from another device fifo instead of to/from memory. + */ + +static void set_fifo_mode(struct net2280 *dev, int mode) +{ + /* keeping high bits preserves BAR2 */ + writel((0xffff << PCI_BASE2_RANGE) | mode, &dev->regs->fifoctl); + + /* always ep-{a,b,e,f} ... maybe not ep-c or ep-d */ + INIT_LIST_HEAD(&dev->gadget.ep_list); + list_add_tail(&dev->ep[1].ep.ep_list, &dev->gadget.ep_list); + list_add_tail(&dev->ep[2].ep.ep_list, &dev->gadget.ep_list); + switch (mode) { + case 0: + list_add_tail(&dev->ep[3].ep.ep_list, &dev->gadget.ep_list); + list_add_tail(&dev->ep[4].ep.ep_list, &dev->gadget.ep_list); + dev->ep[1].fifo_size = dev->ep[2].fifo_size = 1024; + break; + case 1: + dev->ep[1].fifo_size = dev->ep[2].fifo_size = 2048; + break; + case 2: + list_add_tail(&dev->ep[3].ep.ep_list, &dev->gadget.ep_list); + dev->ep[1].fifo_size = 2048; + dev->ep[2].fifo_size = 1024; + break; + } + /* fifo sizes for ep0, ep-c, ep-d, ep-e, and ep-f never change */ + list_add_tail(&dev->ep[5].ep.ep_list, &dev->gadget.ep_list); + list_add_tail(&dev->ep[6].ep.ep_list, &dev->gadget.ep_list); +} + +static void defect7374_disable_data_eps(struct net2280 *dev) +{ + /* + * For Defect 7374, disable data EPs (and more): + * - This phase undoes the earlier phase of the Defect 7374 workaround, + * returing ep regs back to normal. + */ + struct net2280_ep *ep; + int i; + unsigned char ep_sel; + u32 tmp_reg; + + for (i = 1; i < 5; i++) { + ep = &dev->ep[i]; + writel(i, &ep->cfg->ep_cfg); + } + + /* CSROUT, CSRIN, PCIOUT, PCIIN, STATIN, RCIN */ + for (i = 0; i < 6; i++) + writel(0, &dev->dep[i].dep_cfg); + + for (ep_sel = 0; ep_sel <= 21; ep_sel++) { + /* Select an endpoint for subsequent operations: */ + tmp_reg = readl(&dev->plregs->pl_ep_ctrl); + writel(((tmp_reg & ~0x1f) | ep_sel), &dev->plregs->pl_ep_ctrl); + + if (ep_sel < 2 || (ep_sel > 9 && ep_sel < 14) || + ep_sel == 18 || ep_sel == 20) + continue; + + /* Change settings on some selected endpoints */ + tmp_reg = readl(&dev->plregs->pl_ep_cfg_4); + tmp_reg &= ~BIT(NON_CTRL_IN_TOLERATE_BAD_DIR); + writel(tmp_reg, &dev->plregs->pl_ep_cfg_4); + tmp_reg = readl(&dev->plregs->pl_ep_ctrl); + tmp_reg |= BIT(EP_INITIALIZED); + writel(tmp_reg, &dev->plregs->pl_ep_ctrl); + } +} + +static void defect7374_enable_data_eps_zero(struct net2280 *dev) +{ + u32 tmp = 0, tmp_reg; + u32 scratch; + int i; + unsigned char ep_sel; + + scratch = get_idx_reg(dev->regs, SCRATCH); + + WARN_ON((scratch & (0xf << DEFECT7374_FSM_FIELD)) + == DEFECT7374_FSM_SS_CONTROL_READ); + + scratch &= ~(0xf << DEFECT7374_FSM_FIELD); + + ep_warn(dev, "Operate Defect 7374 workaround soft this time"); + ep_warn(dev, "It will operate on cold-reboot and SS connect"); + + /*GPEPs:*/ + tmp = ((0 << ENDPOINT_NUMBER) | BIT(ENDPOINT_DIRECTION) | + (2 << OUT_ENDPOINT_TYPE) | (2 << IN_ENDPOINT_TYPE) | + ((dev->enhanced_mode) ? + BIT(OUT_ENDPOINT_ENABLE) | BIT(IN_ENDPOINT_ENABLE) : + BIT(ENDPOINT_ENABLE))); + + for (i = 1; i < 5; i++) + writel(tmp, &dev->ep[i].cfg->ep_cfg); + + /* CSRIN, PCIIN, STATIN, RCIN*/ + tmp = ((0 << ENDPOINT_NUMBER) | BIT(ENDPOINT_ENABLE)); + writel(tmp, &dev->dep[1].dep_cfg); + writel(tmp, &dev->dep[3].dep_cfg); + writel(tmp, &dev->dep[4].dep_cfg); + writel(tmp, &dev->dep[5].dep_cfg); + + /*Implemented for development and debug. + * Can be refined/tuned later.*/ + for (ep_sel = 0; ep_sel <= 21; ep_sel++) { + /* Select an endpoint for subsequent operations: */ + tmp_reg = readl(&dev->plregs->pl_ep_ctrl); + writel(((tmp_reg & ~0x1f) | ep_sel), + &dev->plregs->pl_ep_ctrl); + + if (ep_sel == 1) { + tmp = + (readl(&dev->plregs->pl_ep_ctrl) | + BIT(CLEAR_ACK_ERROR_CODE) | 0); + writel(tmp, &dev->plregs->pl_ep_ctrl); + continue; + } + + if (ep_sel == 0 || (ep_sel > 9 && ep_sel < 14) || + ep_sel == 18 || ep_sel == 20) + continue; + + tmp = (readl(&dev->plregs->pl_ep_cfg_4) | + BIT(NON_CTRL_IN_TOLERATE_BAD_DIR) | 0); + writel(tmp, &dev->plregs->pl_ep_cfg_4); + + tmp = readl(&dev->plregs->pl_ep_ctrl) & + ~BIT(EP_INITIALIZED); + writel(tmp, &dev->plregs->pl_ep_ctrl); + + } + + /* Set FSM to focus on the first Control Read: + * - Tip: Connection speed is known upon the first + * setup request.*/ + scratch |= DEFECT7374_FSM_WAITING_FOR_CONTROL_READ; + set_idx_reg(dev->regs, SCRATCH, scratch); + +} + +/* keeping it simple: + * - one bus driver, initted first; + * - one function driver, initted second + * + * most of the work to support multiple net2280 controllers would + * be to associate this gadget driver (yes?) with all of them, or + * perhaps to bind specific drivers to specific devices. + */ + +static void usb_reset_228x(struct net2280 *dev) +{ + u32 tmp; + + dev->gadget.speed = USB_SPEED_UNKNOWN; + (void) readl(&dev->usb->usbctl); + + net2280_led_init(dev); + + /* disable automatic responses, and irqs */ + writel(0, &dev->usb->stdrsp); + writel(0, &dev->regs->pciirqenb0); + writel(0, &dev->regs->pciirqenb1); + + /* clear old dma and irq state */ + for (tmp = 0; tmp < 4; tmp++) { + struct net2280_ep *ep = &dev->ep[tmp + 1]; + if (ep->dma) + abort_dma(ep); + } + + writel(~0, &dev->regs->irqstat0), + writel(~(u32)BIT(SUSPEND_REQUEST_INTERRUPT), &dev->regs->irqstat1), + + /* reset, and enable pci */ + tmp = readl(&dev->regs->devinit) | + BIT(PCI_ENABLE) | + BIT(FIFO_SOFT_RESET) | + BIT(USB_SOFT_RESET) | + BIT(M8051_RESET); + writel(tmp, &dev->regs->devinit); + + /* standard fifo and endpoint allocations */ + set_fifo_mode(dev, (fifo_mode <= 2) ? fifo_mode : 0); +} + +static void usb_reset_338x(struct net2280 *dev) +{ + u32 tmp; + + dev->gadget.speed = USB_SPEED_UNKNOWN; + (void)readl(&dev->usb->usbctl); + + net2280_led_init(dev); + + if (dev->bug7734_patched) { + /* disable automatic responses, and irqs */ + writel(0, &dev->usb->stdrsp); + writel(0, &dev->regs->pciirqenb0); + writel(0, &dev->regs->pciirqenb1); + } + + /* clear old dma and irq state */ + for (tmp = 0; tmp < 4; tmp++) { + struct net2280_ep *ep = &dev->ep[tmp + 1]; + struct net2280_dma_regs __iomem *dma; + + if (ep->dma) { + abort_dma(ep); + } else { + dma = &dev->dma[tmp]; + writel(BIT(DMA_ABORT), &dma->dmastat); + writel(0, &dma->dmactl); + } + } + + writel(~0, &dev->regs->irqstat0), writel(~0, &dev->regs->irqstat1); + + if (dev->bug7734_patched) { + /* reset, and enable pci */ + tmp = readl(&dev->regs->devinit) | + BIT(PCI_ENABLE) | + BIT(FIFO_SOFT_RESET) | + BIT(USB_SOFT_RESET) | + BIT(M8051_RESET); + + writel(tmp, &dev->regs->devinit); + } + + /* always ep-{1,2,3,4} ... maybe not ep-3 or ep-4 */ + INIT_LIST_HEAD(&dev->gadget.ep_list); + + for (tmp = 1; tmp < dev->n_ep; tmp++) + list_add_tail(&dev->ep[tmp].ep.ep_list, &dev->gadget.ep_list); + +} + +static void usb_reset(struct net2280 *dev) +{ + if (dev->quirks & PLX_LEGACY) + return usb_reset_228x(dev); + return usb_reset_338x(dev); +} + +static void usb_reinit_228x(struct net2280 *dev) +{ + u32 tmp; + + /* basic endpoint init */ + for (tmp = 0; tmp < 7; tmp++) { + struct net2280_ep *ep = &dev->ep[tmp]; + + ep->ep.name = ep_info_dft[tmp].name; + ep->ep.caps = ep_info_dft[tmp].caps; + ep->dev = dev; + ep->num = tmp; + + if (tmp > 0 && tmp <= 4) { + ep->fifo_size = 1024; + ep->dma = &dev->dma[tmp - 1]; + } else + ep->fifo_size = 64; + ep->regs = &dev->epregs[tmp]; + ep->cfg = &dev->epregs[tmp]; + ep_reset_228x(dev->regs, ep); + } + usb_ep_set_maxpacket_limit(&dev->ep[0].ep, 64); + usb_ep_set_maxpacket_limit(&dev->ep[5].ep, 64); + usb_ep_set_maxpacket_limit(&dev->ep[6].ep, 64); + + dev->gadget.ep0 = &dev->ep[0].ep; + dev->ep[0].stopped = 0; + INIT_LIST_HEAD(&dev->gadget.ep0->ep_list); + + /* we want to prevent lowlevel/insecure access from the USB host, + * but erratum 0119 means this enable bit is ignored + */ + for (tmp = 0; tmp < 5; tmp++) + writel(EP_DONTUSE, &dev->dep[tmp].dep_cfg); +} + +static void usb_reinit_338x(struct net2280 *dev) +{ + int i; + u32 tmp, val; + static const u32 ne[9] = { 0, 1, 2, 3, 4, 1, 2, 3, 4 }; + static const u32 ep_reg_addr[9] = { 0x00, 0xC0, 0x00, 0xC0, 0x00, + 0x00, 0xC0, 0x00, 0xC0 }; + + /* basic endpoint init */ + for (i = 0; i < dev->n_ep; i++) { + struct net2280_ep *ep = &dev->ep[i]; + + ep->ep.name = dev->enhanced_mode ? ep_info_adv[i].name : + ep_info_dft[i].name; + ep->ep.caps = dev->enhanced_mode ? ep_info_adv[i].caps : + ep_info_dft[i].caps; + ep->dev = dev; + ep->num = i; + + if (i > 0 && i <= 4) + ep->dma = &dev->dma[i - 1]; + + if (dev->enhanced_mode) { + ep->cfg = &dev->epregs[ne[i]]; + /* + * Set USB endpoint number, hardware allows same number + * in both directions. + */ + if (i > 0 && i < 5) + writel(ne[i], &ep->cfg->ep_cfg); + ep->regs = (struct net2280_ep_regs __iomem *) + (((void __iomem *)&dev->epregs[ne[i]]) + + ep_reg_addr[i]); + } else { + ep->cfg = &dev->epregs[i]; + ep->regs = &dev->epregs[i]; + } + + ep->fifo_size = (i != 0) ? 2048 : 512; + + ep_reset_338x(dev->regs, ep); + } + usb_ep_set_maxpacket_limit(&dev->ep[0].ep, 512); + + dev->gadget.ep0 = &dev->ep[0].ep; + dev->ep[0].stopped = 0; + + /* Link layer set up */ + if (dev->bug7734_patched) { + tmp = readl(&dev->usb_ext->usbctl2) & + ~(BIT(U1_ENABLE) | BIT(U2_ENABLE) | BIT(LTM_ENABLE)); + writel(tmp, &dev->usb_ext->usbctl2); + } + + /* Hardware Defect and Workaround */ + val = readl(&dev->llregs->ll_lfps_5); + val &= ~(0xf << TIMER_LFPS_6US); + val |= 0x5 << TIMER_LFPS_6US; + writel(val, &dev->llregs->ll_lfps_5); + + val = readl(&dev->llregs->ll_lfps_6); + val &= ~(0xffff << TIMER_LFPS_80US); + val |= 0x0100 << TIMER_LFPS_80US; + writel(val, &dev->llregs->ll_lfps_6); + + /* + * AA_AB Errata. Issue 4. Workaround for SuperSpeed USB + * Hot Reset Exit Handshake may Fail in Specific Case using + * Default Register Settings. Workaround for Enumeration test. + */ + val = readl(&dev->llregs->ll_tsn_counters_2); + val &= ~(0x1f << HOT_TX_NORESET_TS2); + val |= 0x10 << HOT_TX_NORESET_TS2; + writel(val, &dev->llregs->ll_tsn_counters_2); + + val = readl(&dev->llregs->ll_tsn_counters_3); + val &= ~(0x1f << HOT_RX_RESET_TS2); + val |= 0x3 << HOT_RX_RESET_TS2; + writel(val, &dev->llregs->ll_tsn_counters_3); + + /* + * AB errata. Errata 11. Workaround for Default Duration of LFPS + * Handshake Signaling for Device-Initiated U1 Exit is too short. + * Without this, various enumeration failures observed with + * modern superspeed hosts. + */ + val = readl(&dev->llregs->ll_lfps_timers_2); + writel((val & 0xffff0000) | LFPS_TIMERS_2_WORKAROUND_VALUE, + &dev->llregs->ll_lfps_timers_2); + + /* + * Set Recovery Idle to Recover bit: + * - On SS connections, setting Recovery Idle to Recover Fmw improves + * link robustness with various hosts and hubs. + * - It is safe to set for all connection speeds; all chip revisions. + * - R-M-W to leave other bits undisturbed. + * - Reference PLX TT-7372 + */ + val = readl(&dev->llregs->ll_tsn_chicken_bit); + val |= BIT(RECOVERY_IDLE_TO_RECOVER_FMW); + writel(val, &dev->llregs->ll_tsn_chicken_bit); + + INIT_LIST_HEAD(&dev->gadget.ep0->ep_list); + + /* disable dedicated endpoints */ + writel(0x0D, &dev->dep[0].dep_cfg); + writel(0x0D, &dev->dep[1].dep_cfg); + writel(0x0E, &dev->dep[2].dep_cfg); + writel(0x0E, &dev->dep[3].dep_cfg); + writel(0x0F, &dev->dep[4].dep_cfg); + writel(0x0C, &dev->dep[5].dep_cfg); +} + +static void usb_reinit(struct net2280 *dev) +{ + if (dev->quirks & PLX_LEGACY) + return usb_reinit_228x(dev); + return usb_reinit_338x(dev); +} + +static void ep0_start_228x(struct net2280 *dev) +{ + writel(BIT(CLEAR_EP_HIDE_STATUS_PHASE) | + BIT(CLEAR_NAK_OUT_PACKETS) | + BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE), + &dev->epregs[0].ep_rsp); + + /* + * hardware optionally handles a bunch of standard requests + * that the API hides from drivers anyway. have it do so. + * endpoint status/features are handled in software, to + * help pass tests for some dubious behavior. + */ + writel(BIT(SET_TEST_MODE) | + BIT(SET_ADDRESS) | + BIT(DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP) | + BIT(GET_DEVICE_STATUS) | + BIT(GET_INTERFACE_STATUS), + &dev->usb->stdrsp); + writel(BIT(USB_ROOT_PORT_WAKEUP_ENABLE) | + BIT(SELF_POWERED_USB_DEVICE) | + BIT(REMOTE_WAKEUP_SUPPORT) | + (dev->softconnect << USB_DETECT_ENABLE) | + BIT(SELF_POWERED_STATUS), + &dev->usb->usbctl); + + /* enable irqs so we can see ep0 and general operation */ + writel(BIT(SETUP_PACKET_INTERRUPT_ENABLE) | + BIT(ENDPOINT_0_INTERRUPT_ENABLE), + &dev->regs->pciirqenb0); + writel(BIT(PCI_INTERRUPT_ENABLE) | + BIT(PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE) | + BIT(PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE) | + BIT(PCI_RETRY_ABORT_INTERRUPT_ENABLE) | + BIT(VBUS_INTERRUPT_ENABLE) | + BIT(ROOT_PORT_RESET_INTERRUPT_ENABLE) | + BIT(SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE), + &dev->regs->pciirqenb1); + + /* don't leave any writes posted */ + (void) readl(&dev->usb->usbctl); +} + +static void ep0_start_338x(struct net2280 *dev) +{ + + if (dev->bug7734_patched) + writel(BIT(CLEAR_NAK_OUT_PACKETS_MODE) | + BIT(SET_EP_HIDE_STATUS_PHASE), + &dev->epregs[0].ep_rsp); + + /* + * hardware optionally handles a bunch of standard requests + * that the API hides from drivers anyway. have it do so. + * endpoint status/features are handled in software, to + * help pass tests for some dubious behavior. + */ + writel(BIT(SET_ISOCHRONOUS_DELAY) | + BIT(SET_SEL) | + BIT(SET_TEST_MODE) | + BIT(SET_ADDRESS) | + BIT(GET_INTERFACE_STATUS) | + BIT(GET_DEVICE_STATUS), + &dev->usb->stdrsp); + dev->wakeup_enable = 1; + writel(BIT(USB_ROOT_PORT_WAKEUP_ENABLE) | + (dev->softconnect << USB_DETECT_ENABLE) | + BIT(DEVICE_REMOTE_WAKEUP_ENABLE), + &dev->usb->usbctl); + + /* enable irqs so we can see ep0 and general operation */ + writel(BIT(SETUP_PACKET_INTERRUPT_ENABLE) | + BIT(ENDPOINT_0_INTERRUPT_ENABLE), + &dev->regs->pciirqenb0); + writel(BIT(PCI_INTERRUPT_ENABLE) | + BIT(ROOT_PORT_RESET_INTERRUPT_ENABLE) | + BIT(SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE) | + BIT(VBUS_INTERRUPT_ENABLE), + &dev->regs->pciirqenb1); + + /* don't leave any writes posted */ + (void)readl(&dev->usb->usbctl); +} + +static void ep0_start(struct net2280 *dev) +{ + if (dev->quirks & PLX_LEGACY) + return ep0_start_228x(dev); + return ep0_start_338x(dev); +} + +/* when a driver is successfully registered, it will receive + * control requests including set_configuration(), which enables + * non-control requests. then usb traffic follows until a + * disconnect is reported. then a host may connect again, or + * the driver might get unbound. + */ +static int net2280_start(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver) +{ + struct net2280 *dev; + int retval; + unsigned i; + + /* insist on high speed support from the driver, since + * (dev->usb->xcvrdiag & FORCE_FULL_SPEED_MODE) + * "must not be used in normal operation" + */ + if (!driver || driver->max_speed < USB_SPEED_HIGH || + !driver->setup) + return -EINVAL; + + dev = container_of(_gadget, struct net2280, gadget); + + for (i = 0; i < dev->n_ep; i++) + dev->ep[i].irqs = 0; + + /* hook up the driver ... */ + dev->driver = driver; + + retval = device_create_file(&dev->pdev->dev, &dev_attr_function); + if (retval) + goto err_unbind; + retval = device_create_file(&dev->pdev->dev, &dev_attr_queues); + if (retval) + goto err_func; + + /* enable host detection and ep0; and we're ready + * for set_configuration as well as eventual disconnect. + */ + net2280_led_active(dev, 1); + + if ((dev->quirks & PLX_PCIE) && !dev->bug7734_patched) + defect7374_enable_data_eps_zero(dev); + + ep0_start(dev); + + /* pci writes may still be posted */ + return 0; + +err_func: + device_remove_file(&dev->pdev->dev, &dev_attr_function); +err_unbind: + dev->driver = NULL; + return retval; +} + +static void stop_activity(struct net2280 *dev, struct usb_gadget_driver *driver) +{ + int i; + + /* don't disconnect if it's not connected */ + if (dev->gadget.speed == USB_SPEED_UNKNOWN) + driver = NULL; + + /* stop hardware; prevent new request submissions; + * and kill any outstanding requests. + */ + usb_reset(dev); + for (i = 0; i < dev->n_ep; i++) + nuke(&dev->ep[i]); + + /* report disconnect; the driver is already quiesced */ + if (dev->async_callbacks && driver) { + spin_unlock(&dev->lock); + driver->disconnect(&dev->gadget); + spin_lock(&dev->lock); + } + + usb_reinit(dev); +} + +static int net2280_stop(struct usb_gadget *_gadget) +{ + struct net2280 *dev; + unsigned long flags; + + dev = container_of(_gadget, struct net2280, gadget); + + spin_lock_irqsave(&dev->lock, flags); + stop_activity(dev, NULL); + spin_unlock_irqrestore(&dev->lock, flags); + + net2280_led_active(dev, 0); + + device_remove_file(&dev->pdev->dev, &dev_attr_function); + device_remove_file(&dev->pdev->dev, &dev_attr_queues); + + dev->driver = NULL; + + return 0; +} + +static void net2280_async_callbacks(struct usb_gadget *_gadget, bool enable) +{ + struct net2280 *dev = container_of(_gadget, struct net2280, gadget); + + spin_lock_irq(&dev->lock); + dev->async_callbacks = enable; + spin_unlock_irq(&dev->lock); +} + +/*-------------------------------------------------------------------------*/ + +/* handle ep0, ep-e, ep-f with 64 byte packets: packet per irq. + * also works for dma-capable endpoints, in pio mode or just + * to manually advance the queue after short OUT transfers. + */ +static void handle_ep_small(struct net2280_ep *ep) +{ + struct net2280_request *req; + u32 t; + /* 0 error, 1 mid-data, 2 done */ + int mode = 1; + + if (!list_empty(&ep->queue)) + req = list_entry(ep->queue.next, + struct net2280_request, queue); + else + req = NULL; + + /* ack all, and handle what we care about */ + t = readl(&ep->regs->ep_stat); + ep->irqs++; + + ep_vdbg(ep->dev, "%s ack ep_stat %08x, req %p\n", + ep->ep.name, t, req ? &req->req : NULL); + + if (!ep->is_in || (ep->dev->quirks & PLX_2280)) + writel(t & ~BIT(NAK_OUT_PACKETS), &ep->regs->ep_stat); + else + /* Added for 2282 */ + writel(t, &ep->regs->ep_stat); + + /* for ep0, monitor token irqs to catch data stage length errors + * and to synchronize on status. + * + * also, to defer reporting of protocol stalls ... here's where + * data or status first appears, handling stalls here should never + * cause trouble on the host side.. + * + * control requests could be slightly faster without token synch for + * status, but status can jam up that way. + */ + if (unlikely(ep->num == 0)) { + if (ep->is_in) { + /* status; stop NAKing */ + if (t & BIT(DATA_OUT_PING_TOKEN_INTERRUPT)) { + if (ep->dev->protocol_stall) { + ep->stopped = 1; + set_halt(ep); + } + if (!req) + allow_status(ep); + mode = 2; + /* reply to extra IN data tokens with a zlp */ + } else if (t & BIT(DATA_IN_TOKEN_INTERRUPT)) { + if (ep->dev->protocol_stall) { + ep->stopped = 1; + set_halt(ep); + mode = 2; + } else if (ep->responded && + !req && !ep->stopped) + write_fifo(ep, NULL); + } + } else { + /* status; stop NAKing */ + if (t & BIT(DATA_IN_TOKEN_INTERRUPT)) { + if (ep->dev->protocol_stall) { + ep->stopped = 1; + set_halt(ep); + } + mode = 2; + /* an extra OUT token is an error */ + } else if (((t & BIT(DATA_OUT_PING_TOKEN_INTERRUPT)) && + req && + req->req.actual == req->req.length) || + (ep->responded && !req)) { + ep->dev->protocol_stall = 1; + set_halt(ep); + ep->stopped = 1; + if (req) + done(ep, req, -EOVERFLOW); + req = NULL; + } + } + } + + if (unlikely(!req)) + return; + + /* manual DMA queue advance after short OUT */ + if (likely(ep->dma)) { + if (t & BIT(SHORT_PACKET_TRANSFERRED_INTERRUPT)) { + struct net2280_request *stuck_req = NULL; + int stopped = ep->stopped; + int num_completed; + int stuck = 0; + u32 count; + + /* TRANSFERRED works around OUT_DONE erratum 0112. + * we expect (N <= maxpacket) bytes; host wrote M. + * iff (M < N) we won't ever see a DMA interrupt. + */ + ep->stopped = 1; + for (count = 0; ; t = readl(&ep->regs->ep_stat)) { + + /* any preceding dma transfers must finish. + * dma handles (M >= N), may empty the queue + */ + num_completed = scan_dma_completions(ep); + if (unlikely(list_empty(&ep->queue) || + ep->out_overflow)) { + req = NULL; + break; + } + req = list_entry(ep->queue.next, + struct net2280_request, queue); + + /* here either (M < N), a "real" short rx; + * or (M == N) and the queue didn't empty + */ + if (likely(t & BIT(FIFO_EMPTY))) { + count = readl(&ep->dma->dmacount); + count &= DMA_BYTE_COUNT_MASK; + if (readl(&ep->dma->dmadesc) + != req->td_dma) + req = NULL; + break; + } + + /* Escape loop if no dma transfers completed + * after few retries. + */ + if (num_completed == 0) { + if (stuck_req == req && + readl(&ep->dma->dmadesc) != + req->td_dma && stuck++ > 5) { + count = readl( + &ep->dma->dmacount); + count &= DMA_BYTE_COUNT_MASK; + req = NULL; + ep_dbg(ep->dev, "%s escape stuck %d, count %u\n", + ep->ep.name, stuck, + count); + break; + } else if (stuck_req != req) { + stuck_req = req; + stuck = 0; + } + } else { + stuck_req = NULL; + stuck = 0; + } + + udelay(1); + } + + /* stop DMA, leave ep NAKing */ + writel(BIT(DMA_ABORT), &ep->dma->dmastat); + spin_stop_dma(ep->dma); + + if (likely(req)) { + req->td->dmacount = 0; + t = readl(&ep->regs->ep_avail); + dma_done(ep, req, count, + (ep->out_overflow || t) + ? -EOVERFLOW : 0); + } + + /* also flush to prevent erratum 0106 trouble */ + if (unlikely(ep->out_overflow || + (ep->dev->chiprev == 0x0100 && + ep->dev->gadget.speed + == USB_SPEED_FULL))) { + out_flush(ep); + ep->out_overflow = 0; + } + + /* (re)start dma if needed, stop NAKing */ + ep->stopped = stopped; + if (!list_empty(&ep->queue)) + restart_dma(ep); + } else + ep_dbg(ep->dev, "%s dma ep_stat %08x ??\n", + ep->ep.name, t); + return; + + /* data packet(s) received (in the fifo, OUT) */ + } else if (t & BIT(DATA_PACKET_RECEIVED_INTERRUPT)) { + if (read_fifo(ep, req) && ep->num != 0) + mode = 2; + + /* data packet(s) transmitted (IN) */ + } else if (t & BIT(DATA_PACKET_TRANSMITTED_INTERRUPT)) { + unsigned len; + + len = req->req.length - req->req.actual; + if (len > ep->ep.maxpacket) + len = ep->ep.maxpacket; + req->req.actual += len; + + /* if we wrote it all, we're usually done */ + /* send zlps until the status stage */ + if ((req->req.actual == req->req.length) && + (!req->req.zero || len != ep->ep.maxpacket) && ep->num) + mode = 2; + + /* there was nothing to do ... */ + } else if (mode == 1) + return; + + /* done */ + if (mode == 2) { + /* stream endpoints often resubmit/unlink in completion */ + done(ep, req, 0); + + /* maybe advance queue to next request */ + if (ep->num == 0) { + /* NOTE: net2280 could let gadget driver start the + * status stage later. since not all controllers let + * them control that, the api doesn't (yet) allow it. + */ + if (!ep->stopped) + allow_status(ep); + req = NULL; + } else { + if (!list_empty(&ep->queue) && !ep->stopped) + req = list_entry(ep->queue.next, + struct net2280_request, queue); + else + req = NULL; + if (req && !ep->is_in) + stop_out_naking(ep); + } + } + + /* is there a buffer for the next packet? + * for best streaming performance, make sure there is one. + */ + if (req && !ep->stopped) { + + /* load IN fifo with next packet (may be zlp) */ + if (t & BIT(DATA_PACKET_TRANSMITTED_INTERRUPT)) + write_fifo(ep, &req->req); + } +} + +static struct net2280_ep *get_ep_by_addr(struct net2280 *dev, u16 wIndex) +{ + struct net2280_ep *ep; + + if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0) + return &dev->ep[0]; + list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) { + u8 bEndpointAddress; + + if (!ep->desc) + continue; + bEndpointAddress = ep->desc->bEndpointAddress; + if ((wIndex ^ bEndpointAddress) & USB_DIR_IN) + continue; + if ((wIndex & 0x0f) == (bEndpointAddress & 0x0f)) + return ep; + } + return NULL; +} + +static void defect7374_workaround(struct net2280 *dev, struct usb_ctrlrequest r) +{ + u32 scratch, fsmvalue; + u32 ack_wait_timeout, state; + + /* Workaround for Defect 7374 (U1/U2 erroneously rejected): */ + scratch = get_idx_reg(dev->regs, SCRATCH); + fsmvalue = scratch & (0xf << DEFECT7374_FSM_FIELD); + scratch &= ~(0xf << DEFECT7374_FSM_FIELD); + + if (!((fsmvalue == DEFECT7374_FSM_WAITING_FOR_CONTROL_READ) && + (r.bRequestType & USB_DIR_IN))) + return; + + /* This is the first Control Read for this connection: */ + if (!(readl(&dev->usb->usbstat) & BIT(SUPER_SPEED_MODE))) { + /* + * Connection is NOT SS: + * - Connection must be FS or HS. + * - This FSM state should allow workaround software to + * run after the next USB connection. + */ + scratch |= DEFECT7374_FSM_NON_SS_CONTROL_READ; + dev->bug7734_patched = 1; + goto restore_data_eps; + } + + /* Connection is SS: */ + for (ack_wait_timeout = 0; + ack_wait_timeout < DEFECT_7374_NUMBEROF_MAX_WAIT_LOOPS; + ack_wait_timeout++) { + + state = readl(&dev->plregs->pl_ep_status_1) + & (0xff << STATE); + if ((state >= (ACK_GOOD_NORMAL << STATE)) && + (state <= (ACK_GOOD_MORE_ACKS_TO_COME << STATE))) { + scratch |= DEFECT7374_FSM_SS_CONTROL_READ; + dev->bug7734_patched = 1; + break; + } + + /* + * We have not yet received host's Data Phase ACK + * - Wait and try again. + */ + udelay(DEFECT_7374_PROCESSOR_WAIT_TIME); + } + + + if (ack_wait_timeout >= DEFECT_7374_NUMBEROF_MAX_WAIT_LOOPS) { + ep_err(dev, "FAIL: Defect 7374 workaround waited but failed " + "to detect SS host's data phase ACK."); + ep_err(dev, "PL_EP_STATUS_1(23:16):.Expected from 0x11 to 0x16" + "got 0x%2.2x.\n", state >> STATE); + } else { + ep_warn(dev, "INFO: Defect 7374 workaround waited about\n" + "%duSec for Control Read Data Phase ACK\n", + DEFECT_7374_PROCESSOR_WAIT_TIME * ack_wait_timeout); + } + +restore_data_eps: + /* + * Restore data EPs to their pre-workaround settings (disabled, + * initialized, and other details). + */ + defect7374_disable_data_eps(dev); + + set_idx_reg(dev->regs, SCRATCH, scratch); + + return; +} + +static void ep_clear_seqnum(struct net2280_ep *ep) +{ + struct net2280 *dev = ep->dev; + u32 val; + static const u32 ep_pl[9] = { 0, 3, 4, 7, 8, 2, 5, 6, 9 }; + + val = readl(&dev->plregs->pl_ep_ctrl) & ~0x1f; + val |= ep_pl[ep->num]; + writel(val, &dev->plregs->pl_ep_ctrl); + val |= BIT(SEQUENCE_NUMBER_RESET); + writel(val, &dev->plregs->pl_ep_ctrl); + + return; +} + +static void handle_stat0_irqs_superspeed(struct net2280 *dev, + struct net2280_ep *ep, struct usb_ctrlrequest r) +{ + struct net2280_ep *e; + u16 status; + int tmp = 0; + +#define w_value le16_to_cpu(r.wValue) +#define w_index le16_to_cpu(r.wIndex) +#define w_length le16_to_cpu(r.wLength) + + switch (r.bRequest) { + case USB_REQ_SET_CONFIGURATION: + dev->addressed_state = !w_value; + goto usb3_delegate; + + case USB_REQ_GET_STATUS: + switch (r.bRequestType) { + case (USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE): + status = dev->wakeup_enable ? 0x02 : 0x00; + if (dev->gadget.is_selfpowered) + status |= BIT(0); + status |= (dev->u1_enable << 2 | dev->u2_enable << 3 | + dev->ltm_enable << 4); + writel(0, &dev->epregs[0].ep_irqenb); + set_fifo_bytecount(ep, sizeof(status)); + writel((__force u32) status, &dev->epregs[0].ep_data); + allow_status_338x(ep); + break; + + case (USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_ENDPOINT): + e = get_ep_by_addr(dev, w_index); + if (!e) + goto do_stall3; + status = readl(&e->regs->ep_rsp) & + BIT(CLEAR_ENDPOINT_HALT); + writel(0, &dev->epregs[0].ep_irqenb); + set_fifo_bytecount(ep, sizeof(status)); + writel((__force u32) status, &dev->epregs[0].ep_data); + allow_status_338x(ep); + break; + + default: + goto usb3_delegate; + } + break; + + case USB_REQ_CLEAR_FEATURE: + switch (r.bRequestType) { + case (USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE): + if (!dev->addressed_state) { + switch (w_value) { + case USB_DEVICE_U1_ENABLE: + dev->u1_enable = 0; + writel(readl(&dev->usb_ext->usbctl2) & + ~BIT(U1_ENABLE), + &dev->usb_ext->usbctl2); + allow_status_338x(ep); + goto next_endpoints3; + + case USB_DEVICE_U2_ENABLE: + dev->u2_enable = 0; + writel(readl(&dev->usb_ext->usbctl2) & + ~BIT(U2_ENABLE), + &dev->usb_ext->usbctl2); + allow_status_338x(ep); + goto next_endpoints3; + + case USB_DEVICE_LTM_ENABLE: + dev->ltm_enable = 0; + writel(readl(&dev->usb_ext->usbctl2) & + ~BIT(LTM_ENABLE), + &dev->usb_ext->usbctl2); + allow_status_338x(ep); + goto next_endpoints3; + + default: + break; + } + } + if (w_value == USB_DEVICE_REMOTE_WAKEUP) { + dev->wakeup_enable = 0; + writel(readl(&dev->usb->usbctl) & + ~BIT(DEVICE_REMOTE_WAKEUP_ENABLE), + &dev->usb->usbctl); + allow_status_338x(ep); + break; + } + goto usb3_delegate; + + case (USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_ENDPOINT): + e = get_ep_by_addr(dev, w_index); + if (!e) + goto do_stall3; + if (w_value != USB_ENDPOINT_HALT) + goto do_stall3; + ep_vdbg(dev, "%s clear halt\n", e->ep.name); + /* + * Workaround for SS SeqNum not cleared via + * Endpoint Halt (Clear) bit. select endpoint + */ + ep_clear_seqnum(e); + clear_halt(e); + if (!list_empty(&e->queue) && e->td_dma) + restart_dma(e); + allow_status(ep); + ep->stopped = 1; + break; + + default: + goto usb3_delegate; + } + break; + case USB_REQ_SET_FEATURE: + switch (r.bRequestType) { + case (USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE): + if (!dev->addressed_state) { + switch (w_value) { + case USB_DEVICE_U1_ENABLE: + dev->u1_enable = 1; + writel(readl(&dev->usb_ext->usbctl2) | + BIT(U1_ENABLE), + &dev->usb_ext->usbctl2); + allow_status_338x(ep); + goto next_endpoints3; + + case USB_DEVICE_U2_ENABLE: + dev->u2_enable = 1; + writel(readl(&dev->usb_ext->usbctl2) | + BIT(U2_ENABLE), + &dev->usb_ext->usbctl2); + allow_status_338x(ep); + goto next_endpoints3; + + case USB_DEVICE_LTM_ENABLE: + dev->ltm_enable = 1; + writel(readl(&dev->usb_ext->usbctl2) | + BIT(LTM_ENABLE), + &dev->usb_ext->usbctl2); + allow_status_338x(ep); + goto next_endpoints3; + default: + break; + } + } + + if (w_value == USB_DEVICE_REMOTE_WAKEUP) { + dev->wakeup_enable = 1; + writel(readl(&dev->usb->usbctl) | + BIT(DEVICE_REMOTE_WAKEUP_ENABLE), + &dev->usb->usbctl); + allow_status_338x(ep); + break; + } + goto usb3_delegate; + + case (USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_ENDPOINT): + e = get_ep_by_addr(dev, w_index); + if (!e || (w_value != USB_ENDPOINT_HALT)) + goto do_stall3; + ep->stopped = 1; + if (ep->num == 0) + ep->dev->protocol_stall = 1; + else { + if (ep->dma) + abort_dma(ep); + set_halt(ep); + } + allow_status_338x(ep); + break; + + default: + goto usb3_delegate; + } + + break; + default: + +usb3_delegate: + ep_vdbg(dev, "setup %02x.%02x v%04x i%04x l%04x ep_cfg %08x\n", + r.bRequestType, r.bRequest, + w_value, w_index, w_length, + readl(&ep->cfg->ep_cfg)); + + ep->responded = 0; + if (dev->async_callbacks) { + spin_unlock(&dev->lock); + tmp = dev->driver->setup(&dev->gadget, &r); + spin_lock(&dev->lock); + } + } +do_stall3: + if (tmp < 0) { + ep_vdbg(dev, "req %02x.%02x protocol STALL; stat %d\n", + r.bRequestType, r.bRequest, tmp); + dev->protocol_stall = 1; + /* TD 9.9 Halt Endpoint test. TD 9.22 Set feature test */ + set_halt(ep); + } + +next_endpoints3: + +#undef w_value +#undef w_index +#undef w_length + + return; +} + +static void usb338x_handle_ep_intr(struct net2280 *dev, u32 stat0) +{ + u32 index; + u32 bit; + + for (index = 0; index < ARRAY_SIZE(ep_bit); index++) { + bit = BIT(ep_bit[index]); + + if (!stat0) + break; + + if (!(stat0 & bit)) + continue; + + stat0 &= ~bit; + + handle_ep_small(&dev->ep[index]); + } +} + +static void handle_stat0_irqs(struct net2280 *dev, u32 stat) +{ + struct net2280_ep *ep; + u32 num, scratch; + + /* most of these don't need individual acks */ + stat &= ~BIT(INTA_ASSERTED); + if (!stat) + return; + /* ep_dbg(dev, "irqstat0 %04x\n", stat); */ + + /* starting a control request? */ + if (unlikely(stat & BIT(SETUP_PACKET_INTERRUPT))) { + union { + u32 raw[2]; + struct usb_ctrlrequest r; + } u; + int tmp; + struct net2280_request *req; + + if (dev->gadget.speed == USB_SPEED_UNKNOWN) { + u32 val = readl(&dev->usb->usbstat); + if (val & BIT(SUPER_SPEED)) { + dev->gadget.speed = USB_SPEED_SUPER; + usb_ep_set_maxpacket_limit(&dev->ep[0].ep, + EP0_SS_MAX_PACKET_SIZE); + } else if (val & BIT(HIGH_SPEED)) { + dev->gadget.speed = USB_SPEED_HIGH; + usb_ep_set_maxpacket_limit(&dev->ep[0].ep, + EP0_HS_MAX_PACKET_SIZE); + } else { + dev->gadget.speed = USB_SPEED_FULL; + usb_ep_set_maxpacket_limit(&dev->ep[0].ep, + EP0_HS_MAX_PACKET_SIZE); + } + net2280_led_speed(dev, dev->gadget.speed); + ep_dbg(dev, "%s\n", + usb_speed_string(dev->gadget.speed)); + } + + ep = &dev->ep[0]; + ep->irqs++; + + /* make sure any leftover request state is cleared */ + stat &= ~BIT(ENDPOINT_0_INTERRUPT); + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, + struct net2280_request, queue); + done(ep, req, (req->req.actual == req->req.length) + ? 0 : -EPROTO); + } + ep->stopped = 0; + dev->protocol_stall = 0; + if (!(dev->quirks & PLX_PCIE)) { + if (ep->dev->quirks & PLX_2280) + tmp = BIT(FIFO_OVERFLOW) | + BIT(FIFO_UNDERFLOW); + else + tmp = 0; + + writel(tmp | BIT(TIMEOUT) | + BIT(USB_STALL_SENT) | + BIT(USB_IN_NAK_SENT) | + BIT(USB_IN_ACK_RCVD) | + BIT(USB_OUT_PING_NAK_SENT) | + BIT(USB_OUT_ACK_SENT) | + BIT(SHORT_PACKET_OUT_DONE_INTERRUPT) | + BIT(SHORT_PACKET_TRANSFERRED_INTERRUPT) | + BIT(DATA_PACKET_RECEIVED_INTERRUPT) | + BIT(DATA_PACKET_TRANSMITTED_INTERRUPT) | + BIT(DATA_OUT_PING_TOKEN_INTERRUPT) | + BIT(DATA_IN_TOKEN_INTERRUPT), + &ep->regs->ep_stat); + } + u.raw[0] = readl(&dev->usb->setup0123); + u.raw[1] = readl(&dev->usb->setup4567); + + cpu_to_le32s(&u.raw[0]); + cpu_to_le32s(&u.raw[1]); + + if ((dev->quirks & PLX_PCIE) && !dev->bug7734_patched) + defect7374_workaround(dev, u.r); + + tmp = 0; + +#define w_value le16_to_cpu(u.r.wValue) +#define w_index le16_to_cpu(u.r.wIndex) +#define w_length le16_to_cpu(u.r.wLength) + + /* ack the irq */ + writel(BIT(SETUP_PACKET_INTERRUPT), &dev->regs->irqstat0); + stat ^= BIT(SETUP_PACKET_INTERRUPT); + + /* watch control traffic at the token level, and force + * synchronization before letting the status stage happen. + * FIXME ignore tokens we'll NAK, until driver responds. + * that'll mean a lot less irqs for some drivers. + */ + ep->is_in = (u.r.bRequestType & USB_DIR_IN) != 0; + if (ep->is_in) { + scratch = BIT(DATA_PACKET_TRANSMITTED_INTERRUPT) | + BIT(DATA_OUT_PING_TOKEN_INTERRUPT) | + BIT(DATA_IN_TOKEN_INTERRUPT); + stop_out_naking(ep); + } else + scratch = BIT(DATA_PACKET_RECEIVED_INTERRUPT) | + BIT(DATA_OUT_PING_TOKEN_INTERRUPT) | + BIT(DATA_IN_TOKEN_INTERRUPT); + writel(scratch, &dev->epregs[0].ep_irqenb); + + /* we made the hardware handle most lowlevel requests; + * everything else goes uplevel to the gadget code. + */ + ep->responded = 1; + + if (dev->gadget.speed == USB_SPEED_SUPER) { + handle_stat0_irqs_superspeed(dev, ep, u.r); + goto next_endpoints; + } + + switch (u.r.bRequest) { + case USB_REQ_GET_STATUS: { + struct net2280_ep *e; + __le32 status; + + /* hw handles device and interface status */ + if (u.r.bRequestType != (USB_DIR_IN|USB_RECIP_ENDPOINT)) + goto delegate; + e = get_ep_by_addr(dev, w_index); + if (!e || w_length > 2) + goto do_stall; + + if (readl(&e->regs->ep_rsp) & BIT(SET_ENDPOINT_HALT)) + status = cpu_to_le32(1); + else + status = cpu_to_le32(0); + + /* don't bother with a request object! */ + writel(0, &dev->epregs[0].ep_irqenb); + set_fifo_bytecount(ep, w_length); + writel((__force u32)status, &dev->epregs[0].ep_data); + allow_status(ep); + ep_vdbg(dev, "%s stat %02x\n", ep->ep.name, status); + goto next_endpoints; + } + break; + case USB_REQ_CLEAR_FEATURE: { + struct net2280_ep *e; + + /* hw handles device features */ + if (u.r.bRequestType != USB_RECIP_ENDPOINT) + goto delegate; + if (w_value != USB_ENDPOINT_HALT || w_length != 0) + goto do_stall; + e = get_ep_by_addr(dev, w_index); + if (!e) + goto do_stall; + if (e->wedged) { + ep_vdbg(dev, "%s wedged, halt not cleared\n", + ep->ep.name); + } else { + ep_vdbg(dev, "%s clear halt\n", e->ep.name); + clear_halt(e); + if ((ep->dev->quirks & PLX_PCIE) && + !list_empty(&e->queue) && e->td_dma) + restart_dma(e); + } + allow_status(ep); + goto next_endpoints; + } + break; + case USB_REQ_SET_FEATURE: { + struct net2280_ep *e; + + /* hw handles device features */ + if (u.r.bRequestType != USB_RECIP_ENDPOINT) + goto delegate; + if (w_value != USB_ENDPOINT_HALT || w_length != 0) + goto do_stall; + e = get_ep_by_addr(dev, w_index); + if (!e) + goto do_stall; + if (e->ep.name == ep0name) + goto do_stall; + set_halt(e); + if ((dev->quirks & PLX_PCIE) && e->dma) + abort_dma(e); + allow_status(ep); + ep_vdbg(dev, "%s set halt\n", ep->ep.name); + goto next_endpoints; + } + break; + default: +delegate: + ep_vdbg(dev, "setup %02x.%02x v%04x i%04x l%04x " + "ep_cfg %08x\n", + u.r.bRequestType, u.r.bRequest, + w_value, w_index, w_length, + readl(&ep->cfg->ep_cfg)); + ep->responded = 0; + if (dev->async_callbacks) { + spin_unlock(&dev->lock); + tmp = dev->driver->setup(&dev->gadget, &u.r); + spin_lock(&dev->lock); + } + } + + /* stall ep0 on error */ + if (tmp < 0) { +do_stall: + ep_vdbg(dev, "req %02x.%02x protocol STALL; stat %d\n", + u.r.bRequestType, u.r.bRequest, tmp); + dev->protocol_stall = 1; + } + + /* some in/out token irq should follow; maybe stall then. + * driver must queue a request (even zlp) or halt ep0 + * before the host times out. + */ + } + +#undef w_value +#undef w_index +#undef w_length + +next_endpoints: + if ((dev->quirks & PLX_PCIE) && dev->enhanced_mode) { + u32 mask = (BIT(ENDPOINT_0_INTERRUPT) | + USB3380_IRQSTAT0_EP_INTR_MASK_IN | + USB3380_IRQSTAT0_EP_INTR_MASK_OUT); + + if (stat & mask) { + usb338x_handle_ep_intr(dev, stat & mask); + stat &= ~mask; + } + } else { + /* endpoint data irq ? */ + scratch = stat & 0x7f; + stat &= ~0x7f; + for (num = 0; scratch; num++) { + u32 t; + + /* do this endpoint's FIFO and queue need tending? */ + t = BIT(num); + if ((scratch & t) == 0) + continue; + scratch ^= t; + + ep = &dev->ep[num]; + handle_ep_small(ep); + } + } + + if (stat) + ep_dbg(dev, "unhandled irqstat0 %08x\n", stat); +} + +#define DMA_INTERRUPTS (BIT(DMA_D_INTERRUPT) | \ + BIT(DMA_C_INTERRUPT) | \ + BIT(DMA_B_INTERRUPT) | \ + BIT(DMA_A_INTERRUPT)) +#define PCI_ERROR_INTERRUPTS ( \ + BIT(PCI_MASTER_ABORT_RECEIVED_INTERRUPT) | \ + BIT(PCI_TARGET_ABORT_RECEIVED_INTERRUPT) | \ + BIT(PCI_RETRY_ABORT_INTERRUPT)) + +static void handle_stat1_irqs(struct net2280 *dev, u32 stat) +__releases(dev->lock) +__acquires(dev->lock) +{ + struct net2280_ep *ep; + u32 tmp, num, mask, scratch; + + /* after disconnect there's nothing else to do! */ + tmp = BIT(VBUS_INTERRUPT) | BIT(ROOT_PORT_RESET_INTERRUPT); + mask = BIT(SUPER_SPEED) | BIT(HIGH_SPEED) | BIT(FULL_SPEED); + + /* VBUS disconnect is indicated by VBUS_PIN and VBUS_INTERRUPT set. + * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRUPT set and + * both HIGH_SPEED and FULL_SPEED clear (as ROOT_PORT_RESET_INTERRUPT + * only indicates a change in the reset state). + */ + if (stat & tmp) { + bool reset = false; + bool disconnect = false; + + /* + * Ignore disconnects and resets if the speed hasn't been set. + * VBUS can bounce and there's always an initial reset. + */ + writel(tmp, &dev->regs->irqstat1); + if (dev->gadget.speed != USB_SPEED_UNKNOWN) { + if ((stat & BIT(VBUS_INTERRUPT)) && + (readl(&dev->usb->usbctl) & + BIT(VBUS_PIN)) == 0) { + disconnect = true; + ep_dbg(dev, "disconnect %s\n", + dev->driver->driver.name); + } else if ((stat & BIT(ROOT_PORT_RESET_INTERRUPT)) && + (readl(&dev->usb->usbstat) & mask) + == 0) { + reset = true; + ep_dbg(dev, "reset %s\n", + dev->driver->driver.name); + } + + if (disconnect || reset) { + stop_activity(dev, dev->driver); + ep0_start(dev); + if (dev->async_callbacks) { + spin_unlock(&dev->lock); + if (reset) + usb_gadget_udc_reset(&dev->gadget, dev->driver); + else + (dev->driver->disconnect)(&dev->gadget); + spin_lock(&dev->lock); + } + return; + } + } + stat &= ~tmp; + + /* vBUS can bounce ... one of many reasons to ignore the + * notion of hotplug events on bus connect/disconnect! + */ + if (!stat) + return; + } + + /* NOTE: chip stays in PCI D0 state for now, but it could + * enter D1 to save more power + */ + tmp = BIT(SUSPEND_REQUEST_CHANGE_INTERRUPT); + if (stat & tmp) { + writel(tmp, &dev->regs->irqstat1); + spin_unlock(&dev->lock); + if (stat & BIT(SUSPEND_REQUEST_INTERRUPT)) { + if (dev->async_callbacks && dev->driver->suspend) + dev->driver->suspend(&dev->gadget); + if (!enable_suspend) + stat &= ~BIT(SUSPEND_REQUEST_INTERRUPT); + } else { + if (dev->async_callbacks && dev->driver->resume) + dev->driver->resume(&dev->gadget); + /* at high speed, note erratum 0133 */ + } + spin_lock(&dev->lock); + stat &= ~tmp; + } + + /* clear any other status/irqs */ + if (stat) + writel(stat, &dev->regs->irqstat1); + + /* some status we can just ignore */ + if (dev->quirks & PLX_2280) + stat &= ~(BIT(CONTROL_STATUS_INTERRUPT) | + BIT(SUSPEND_REQUEST_INTERRUPT) | + BIT(RESUME_INTERRUPT) | + BIT(SOF_INTERRUPT)); + else + stat &= ~(BIT(CONTROL_STATUS_INTERRUPT) | + BIT(RESUME_INTERRUPT) | + BIT(SOF_DOWN_INTERRUPT) | + BIT(SOF_INTERRUPT)); + + if (!stat) + return; + /* ep_dbg(dev, "irqstat1 %08x\n", stat);*/ + + /* DMA status, for ep-{a,b,c,d} */ + scratch = stat & DMA_INTERRUPTS; + stat &= ~DMA_INTERRUPTS; + scratch >>= 9; + for (num = 0; scratch; num++) { + struct net2280_dma_regs __iomem *dma; + + tmp = BIT(num); + if ((tmp & scratch) == 0) + continue; + scratch ^= tmp; + + ep = &dev->ep[num + 1]; + dma = ep->dma; + + if (!dma) + continue; + + /* clear ep's dma status */ + tmp = readl(&dma->dmastat); + writel(tmp, &dma->dmastat); + + /* dma sync*/ + if (dev->quirks & PLX_PCIE) { + u32 r_dmacount = readl(&dma->dmacount); + if (!ep->is_in && (r_dmacount & 0x00FFFFFF) && + (tmp & BIT(DMA_TRANSACTION_DONE_INTERRUPT))) + continue; + } + + if (!(tmp & BIT(DMA_TRANSACTION_DONE_INTERRUPT))) { + ep_dbg(ep->dev, "%s no xact done? %08x\n", + ep->ep.name, tmp); + continue; + } + stop_dma(ep->dma); + + /* OUT transfers terminate when the data from the + * host is in our memory. Process whatever's done. + * On this path, we know transfer's last packet wasn't + * less than req->length. NAK_OUT_PACKETS may be set, + * or the FIFO may already be holding new packets. + * + * IN transfers can linger in the FIFO for a very + * long time ... we ignore that for now, accounting + * precisely (like PIO does) needs per-packet irqs + */ + scan_dma_completions(ep); + + /* disable dma on inactive queues; else maybe restart */ + if (!list_empty(&ep->queue)) { + tmp = readl(&dma->dmactl); + restart_dma(ep); + } + ep->irqs++; + } + + /* NOTE: there are other PCI errors we might usefully notice. + * if they appear very often, here's where to try recovering. + */ + if (stat & PCI_ERROR_INTERRUPTS) { + ep_err(dev, "pci dma error; stat %08x\n", stat); + stat &= ~PCI_ERROR_INTERRUPTS; + /* these are fatal errors, but "maybe" they won't + * happen again ... + */ + stop_activity(dev, dev->driver); + ep0_start(dev); + stat = 0; + } + + if (stat) + ep_dbg(dev, "unhandled irqstat1 %08x\n", stat); +} + +static irqreturn_t net2280_irq(int irq, void *_dev) +{ + struct net2280 *dev = _dev; + + /* shared interrupt, not ours */ + if ((dev->quirks & PLX_LEGACY) && + (!(readl(&dev->regs->irqstat0) & BIT(INTA_ASSERTED)))) + return IRQ_NONE; + + spin_lock(&dev->lock); + + /* handle disconnect, dma, and more */ + handle_stat1_irqs(dev, readl(&dev->regs->irqstat1)); + + /* control requests and PIO */ + handle_stat0_irqs(dev, readl(&dev->regs->irqstat0)); + + if (dev->quirks & PLX_PCIE) { + /* re-enable interrupt to trigger any possible new interrupt */ + u32 pciirqenb1 = readl(&dev->regs->pciirqenb1); + writel(pciirqenb1 & 0x7FFFFFFF, &dev->regs->pciirqenb1); + writel(pciirqenb1, &dev->regs->pciirqenb1); + } + + spin_unlock(&dev->lock); + + return IRQ_HANDLED; +} + +/*-------------------------------------------------------------------------*/ + +static void gadget_release(struct device *_dev) +{ + struct net2280 *dev = container_of(_dev, struct net2280, gadget.dev); + + kfree(dev); +} + +/* tear down the binding between this driver and the pci device */ + +static void net2280_remove(struct pci_dev *pdev) +{ + struct net2280 *dev = pci_get_drvdata(pdev); + + if (dev->added) + usb_del_gadget(&dev->gadget); + + BUG_ON(dev->driver); + + /* then clean up the resources we allocated during probe() */ + if (dev->requests) { + int i; + for (i = 1; i < 5; i++) { + if (!dev->ep[i].dummy) + continue; + dma_pool_free(dev->requests, dev->ep[i].dummy, + dev->ep[i].td_dma); + } + dma_pool_destroy(dev->requests); + } + if (dev->got_irq) + free_irq(pdev->irq, dev); + if (dev->quirks & PLX_PCIE) + pci_disable_msi(pdev); + if (dev->regs) { + net2280_led_shutdown(dev); + iounmap(dev->regs); + } + if (dev->region) + release_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + if (dev->enabled) + pci_disable_device(pdev); + device_remove_file(&pdev->dev, &dev_attr_registers); + + ep_info(dev, "unbind\n"); + usb_put_gadget(&dev->gadget); +} + +/* wrap this driver around the specified device, but + * don't respond over USB until a gadget driver binds to us. + */ + +static int net2280_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct net2280 *dev; + unsigned long resource, len; + void __iomem *base = NULL; + int retval, i; + + /* alloc, and start init */ + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (dev == NULL) { + retval = -ENOMEM; + goto done; + } + + pci_set_drvdata(pdev, dev); + usb_initialize_gadget(&pdev->dev, &dev->gadget, gadget_release); + spin_lock_init(&dev->lock); + dev->quirks = id->driver_data; + dev->pdev = pdev; + dev->gadget.ops = &net2280_ops; + dev->gadget.max_speed = (dev->quirks & PLX_SUPERSPEED) ? + USB_SPEED_SUPER : USB_SPEED_HIGH; + + /* the "gadget" abstracts/virtualizes the controller */ + dev->gadget.name = driver_name; + + /* now all the pci goodies ... */ + if (pci_enable_device(pdev) < 0) { + retval = -ENODEV; + goto done; + } + dev->enabled = 1; + + /* BAR 0 holds all the registers + * BAR 1 is 8051 memory; unused here (note erratum 0103) + * BAR 2 is fifo memory; unused here + */ + resource = pci_resource_start(pdev, 0); + len = pci_resource_len(pdev, 0); + if (!request_mem_region(resource, len, driver_name)) { + ep_dbg(dev, "controller already in use\n"); + retval = -EBUSY; + goto done; + } + dev->region = 1; + + /* FIXME provide firmware download interface to put + * 8051 code into the chip, e.g. to turn on PCI PM. + */ + + base = ioremap(resource, len); + if (base == NULL) { + ep_dbg(dev, "can't map memory\n"); + retval = -EFAULT; + goto done; + } + dev->regs = (struct net2280_regs __iomem *) base; + dev->usb = (struct net2280_usb_regs __iomem *) (base + 0x0080); + dev->pci = (struct net2280_pci_regs __iomem *) (base + 0x0100); + dev->dma = (struct net2280_dma_regs __iomem *) (base + 0x0180); + dev->dep = (struct net2280_dep_regs __iomem *) (base + 0x0200); + dev->epregs = (struct net2280_ep_regs __iomem *) (base + 0x0300); + + if (dev->quirks & PLX_PCIE) { + u32 fsmvalue; + u32 usbstat; + dev->usb_ext = (struct usb338x_usb_ext_regs __iomem *) + (base + 0x00b4); + dev->llregs = (struct usb338x_ll_regs __iomem *) + (base + 0x0700); + dev->plregs = (struct usb338x_pl_regs __iomem *) + (base + 0x0800); + usbstat = readl(&dev->usb->usbstat); + dev->enhanced_mode = !!(usbstat & BIT(11)); + dev->n_ep = (dev->enhanced_mode) ? 9 : 5; + /* put into initial config, link up all endpoints */ + fsmvalue = get_idx_reg(dev->regs, SCRATCH) & + (0xf << DEFECT7374_FSM_FIELD); + /* See if firmware needs to set up for workaround: */ + if (fsmvalue == DEFECT7374_FSM_SS_CONTROL_READ) { + dev->bug7734_patched = 1; + writel(0, &dev->usb->usbctl); + } else + dev->bug7734_patched = 0; + } else { + dev->enhanced_mode = 0; + dev->n_ep = 7; + /* put into initial config, link up all endpoints */ + writel(0, &dev->usb->usbctl); + } + + usb_reset(dev); + usb_reinit(dev); + + /* irq setup after old hardware is cleaned up */ + if (!pdev->irq) { + ep_err(dev, "No IRQ. Check PCI setup!\n"); + retval = -ENODEV; + goto done; + } + + if (dev->quirks & PLX_PCIE) + if (pci_enable_msi(pdev)) + ep_err(dev, "Failed to enable MSI mode\n"); + + if (request_irq(pdev->irq, net2280_irq, IRQF_SHARED, + driver_name, dev)) { + ep_err(dev, "request interrupt %d failed\n", pdev->irq); + retval = -EBUSY; + goto done; + } + dev->got_irq = 1; + + /* DMA setup */ + /* NOTE: we know only the 32 LSBs of dma addresses may be nonzero */ + dev->requests = dma_pool_create("requests", &pdev->dev, + sizeof(struct net2280_dma), + 0 /* no alignment requirements */, + 0 /* or page-crossing issues */); + if (!dev->requests) { + ep_dbg(dev, "can't get request pool\n"); + retval = -ENOMEM; + goto done; + } + for (i = 1; i < 5; i++) { + struct net2280_dma *td; + + td = dma_pool_alloc(dev->requests, GFP_KERNEL, + &dev->ep[i].td_dma); + if (!td) { + ep_dbg(dev, "can't get dummy %d\n", i); + retval = -ENOMEM; + goto done; + } + td->dmacount = 0; /* not VALID */ + td->dmadesc = td->dmaaddr; + dev->ep[i].dummy = td; + } + + /* enable lower-overhead pci memory bursts during DMA */ + if (dev->quirks & PLX_LEGACY) + writel(BIT(DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE) | + /* + * 256 write retries may not be enough... + BIT(PCI_RETRY_ABORT_ENABLE) | + */ + BIT(DMA_READ_MULTIPLE_ENABLE) | + BIT(DMA_READ_LINE_ENABLE), + &dev->pci->pcimstctl); + /* erratum 0115 shouldn't appear: Linux inits PCI_LATENCY_TIMER */ + pci_set_master(pdev); + pci_try_set_mwi(pdev); + + /* ... also flushes any posted pci writes */ + dev->chiprev = get_idx_reg(dev->regs, REG_CHIPREV) & 0xffff; + + /* done */ + ep_info(dev, "%s\n", driver_desc); + ep_info(dev, "irq %d, pci mem %p, chip rev %04x\n", + pdev->irq, base, dev->chiprev); + ep_info(dev, "version: " DRIVER_VERSION "; %s\n", + dev->enhanced_mode ? "enhanced mode" : "legacy mode"); + retval = device_create_file(&pdev->dev, &dev_attr_registers); + if (retval) + goto done; + + retval = usb_add_gadget(&dev->gadget); + if (retval) + goto done; + dev->added = 1; + return 0; + +done: + if (dev) { + net2280_remove(pdev); + kfree(dev); + } + return retval; +} + +/* make sure the board is quiescent; otherwise it will continue + * generating IRQs across the upcoming reboot. + */ + +static void net2280_shutdown(struct pci_dev *pdev) +{ + struct net2280 *dev = pci_get_drvdata(pdev); + + /* disable IRQs */ + writel(0, &dev->regs->pciirqenb0); + writel(0, &dev->regs->pciirqenb1); + + /* disable the pullup so the host will think we're gone */ + writel(0, &dev->usb->usbctl); + +} + + +/*-------------------------------------------------------------------------*/ + +static const struct pci_device_id pci_ids[] = { { + .class = PCI_CLASS_SERIAL_USB_DEVICE, + .class_mask = ~0, + .vendor = PCI_VENDOR_ID_PLX_LEGACY, + .device = 0x2280, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = PLX_LEGACY | PLX_2280, + }, { + .class = PCI_CLASS_SERIAL_USB_DEVICE, + .class_mask = ~0, + .vendor = PCI_VENDOR_ID_PLX_LEGACY, + .device = 0x2282, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = PLX_LEGACY, + }, + { + .class = PCI_CLASS_SERIAL_USB_DEVICE, + .class_mask = ~0, + .vendor = PCI_VENDOR_ID_PLX, + .device = 0x2380, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = PLX_PCIE, + }, + { + .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), + .class_mask = ~0, + .vendor = PCI_VENDOR_ID_PLX, + .device = 0x3380, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = PLX_PCIE | PLX_SUPERSPEED, + }, + { + .class = PCI_CLASS_SERIAL_USB_DEVICE, + .class_mask = ~0, + .vendor = PCI_VENDOR_ID_PLX, + .device = 0x3382, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = PLX_PCIE | PLX_SUPERSPEED, + }, +{ /* end: all zeroes */ } +}; +MODULE_DEVICE_TABLE(pci, pci_ids); + +/* pci driver glue; this is a "new style" PCI driver module */ +static struct pci_driver net2280_pci_driver = { + .name = driver_name, + .id_table = pci_ids, + + .probe = net2280_probe, + .remove = net2280_remove, + .shutdown = net2280_shutdown, + + /* FIXME add power management support */ +}; + +module_pci_driver(net2280_pci_driver); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("David Brownell"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/udc/net2280.h b/drivers/usb/gadget/udc/net2280.h new file mode 100644 index 000000000..34716a9f4 --- /dev/null +++ b/drivers/usb/gadget/udc/net2280.h @@ -0,0 +1,390 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * NetChip 2280 high/full speed USB device controller. + * Unlike many such controllers, this one talks PCI. + */ + +/* + * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com) + * Copyright (C) 2003 David Brownell + * Copyright (C) 2014 Ricardo Ribalda - Qtechnology/AS + */ + +#include <linux/usb/net2280.h> +#include <linux/usb/usb338x.h> + +/*-------------------------------------------------------------------------*/ + +#ifdef __KERNEL__ + +/* indexed registers [11.10] are accessed indirectly + * caller must own the device lock. + */ + +static inline u32 get_idx_reg(struct net2280_regs __iomem *regs, u32 index) +{ + writel(index, ®s->idxaddr); + /* NOTE: synchs device/cpu memory views */ + return readl(®s->idxdata); +} + +static inline void +set_idx_reg(struct net2280_regs __iomem *regs, u32 index, u32 value) +{ + writel(index, ®s->idxaddr); + writel(value, ®s->idxdata); + /* posted, may not be visible yet */ +} + +#endif /* __KERNEL__ */ + +#define PCI_VENDOR_ID_PLX_LEGACY 0x17cc + +#define PLX_LEGACY BIT(0) +#define PLX_2280 BIT(1) +#define PLX_SUPERSPEED BIT(2) +#define PLX_PCIE BIT(3) + +#define REG_DIAG 0x0 +#define RETRY_COUNTER 16 +#define FORCE_PCI_SERR 11 +#define FORCE_PCI_INTERRUPT 10 +#define FORCE_USB_INTERRUPT 9 +#define FORCE_CPU_INTERRUPT 8 +#define ILLEGAL_BYTE_ENABLES 5 +#define FAST_TIMES 4 +#define FORCE_RECEIVE_ERROR 2 +#define FORCE_TRANSMIT_CRC_ERROR 0 +#define REG_FRAME 0x02 /* from last sof */ +#define REG_CHIPREV 0x03 /* in bcd */ +#define REG_HS_NAK_RATE 0x0a /* NAK per N uframes */ + +#define CHIPREV_1 0x0100 +#define CHIPREV_1A 0x0110 + +/* DEFECT 7374 */ +#define DEFECT_7374_NUMBEROF_MAX_WAIT_LOOPS 200 +#define DEFECT_7374_PROCESSOR_WAIT_TIME 10 + +/* ep0 max packet size */ +#define EP0_SS_MAX_PACKET_SIZE 0x200 +#define EP0_HS_MAX_PACKET_SIZE 0x40 +#ifdef __KERNEL__ + +/*-------------------------------------------------------------------------*/ + +/* [8.3] for scatter/gather i/o + * use struct net2280_dma_regs bitfields + */ +struct net2280_dma { + __le32 dmacount; + __le32 dmaaddr; /* the buffer */ + __le32 dmadesc; /* next dma descriptor */ + __le32 _reserved; +} __aligned(16); + +/*-------------------------------------------------------------------------*/ + +/* DRIVER DATA STRUCTURES and UTILITIES */ + +struct net2280_ep { + struct usb_ep ep; + struct net2280_ep_regs __iomem *cfg; + struct net2280_ep_regs __iomem *regs; + struct net2280_dma_regs __iomem *dma; + struct net2280_dma *dummy; + dma_addr_t td_dma; /* of dummy */ + struct net2280 *dev; + unsigned long irqs; + + /* analogous to a host-side qh */ + struct list_head queue; + const struct usb_endpoint_descriptor *desc; + unsigned num : 8, + fifo_size : 12, + in_fifo_validate : 1, + out_overflow : 1, + stopped : 1, + wedged : 1, + is_in : 1, + is_iso : 1, + responded : 1; +}; + +static inline void allow_status(struct net2280_ep *ep) +{ + /* ep0 only */ + writel(BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) | + BIT(CLEAR_NAK_OUT_PACKETS) | + BIT(CLEAR_NAK_OUT_PACKETS_MODE), + &ep->regs->ep_rsp); + ep->stopped = 1; +} + +static inline void allow_status_338x(struct net2280_ep *ep) +{ + /* + * Control Status Phase Handshake was set by the chip when the setup + * packet arrived. While set, the chip automatically NAKs the host's + * Status Phase tokens. + */ + writel(BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE), &ep->regs->ep_rsp); + + ep->stopped = 1; + + /* TD 9.9 Halt Endpoint test. TD 9.22 set feature test. */ + ep->responded = 0; +} + +struct net2280_request { + struct usb_request req; + struct net2280_dma *td; + dma_addr_t td_dma; + struct list_head queue; + unsigned mapped : 1, + valid : 1; +}; + +struct net2280 { + /* each pci device provides one gadget, several endpoints */ + struct usb_gadget gadget; + spinlock_t lock; + struct net2280_ep ep[9]; + struct usb_gadget_driver *driver; + unsigned enabled : 1, + protocol_stall : 1, + softconnect : 1, + got_irq : 1, + region:1, + added:1, + u1_enable:1, + u2_enable:1, + ltm_enable:1, + wakeup_enable:1, + addressed_state:1, + async_callbacks:1, + bug7734_patched:1; + u16 chiprev; + int enhanced_mode; + int n_ep; + kernel_ulong_t quirks; + + + /* pci state used to access those endpoints */ + struct pci_dev *pdev; + struct net2280_regs __iomem *regs; + struct net2280_usb_regs __iomem *usb; + struct usb338x_usb_ext_regs __iomem *usb_ext; + struct net2280_pci_regs __iomem *pci; + struct net2280_dma_regs __iomem *dma; + struct net2280_dep_regs __iomem *dep; + struct net2280_ep_regs __iomem *epregs; + struct usb338x_ll_regs __iomem *llregs; + struct usb338x_pl_regs __iomem *plregs; + + struct dma_pool *requests; + /* statistics...*/ +}; + +static inline void set_halt(struct net2280_ep *ep) +{ + /* ep0 and bulk/intr endpoints */ + writel(BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) | + /* set NAK_OUT for erratum 0114 */ + ((ep->dev->chiprev == CHIPREV_1) << SET_NAK_OUT_PACKETS) | + BIT(SET_ENDPOINT_HALT), + &ep->regs->ep_rsp); +} + +static inline void clear_halt(struct net2280_ep *ep) +{ + /* ep0 and bulk/intr endpoints */ + writel(BIT(CLEAR_ENDPOINT_HALT) | + BIT(CLEAR_ENDPOINT_TOGGLE) | + /* + * unless the gadget driver left a short packet in the + * fifo, this reverses the erratum 0114 workaround. + */ + ((ep->dev->chiprev == CHIPREV_1) << CLEAR_NAK_OUT_PACKETS), + &ep->regs->ep_rsp); +} + +/* + * FSM value for Defect 7374 (U1U2 Test) is managed in + * chip's SCRATCH register: + */ +#define DEFECT7374_FSM_FIELD 28 + +/* Waiting for Control Read: + * - A transition to this state indicates a fresh USB connection, + * before the first Setup Packet. The connection speed is not + * known. Firmware is waiting for the first Control Read. + * - Starting state: This state can be thought of as the FSM's typical + * starting state. + * - Tip: Upon the first SS Control Read the FSM never + * returns to this state. + */ +#define DEFECT7374_FSM_WAITING_FOR_CONTROL_READ BIT(DEFECT7374_FSM_FIELD) + +/* Non-SS Control Read: + * - A transition to this state indicates detection of the first HS + * or FS Control Read. + * - Tip: Upon the first SS Control Read the FSM never + * returns to this state. + */ +#define DEFECT7374_FSM_NON_SS_CONTROL_READ (2 << DEFECT7374_FSM_FIELD) + +/* SS Control Read: + * - A transition to this state indicates detection of the + * first SS Control Read. + * - This state indicates workaround completion. Workarounds no longer + * need to be applied (as long as the chip remains powered up). + * - Tip: Once in this state the FSM state does not change (until + * the chip's power is lost and restored). + * - This can be thought of as the final state of the FSM; + * the FSM 'locks-up' in this state until the chip loses power. + */ +#define DEFECT7374_FSM_SS_CONTROL_READ (3 << DEFECT7374_FSM_FIELD) + +#ifdef USE_RDK_LEDS + +static inline void net2280_led_init(struct net2280 *dev) +{ + /* LED3 (green) is on during USB activity. note erratum 0113. */ + writel(BIT(GPIO3_LED_SELECT) | + BIT(GPIO3_OUTPUT_ENABLE) | + BIT(GPIO2_OUTPUT_ENABLE) | + BIT(GPIO1_OUTPUT_ENABLE) | + BIT(GPIO0_OUTPUT_ENABLE), + &dev->regs->gpioctl); +} + +/* indicate speed with bi-color LED 0/1 */ +static inline +void net2280_led_speed(struct net2280 *dev, enum usb_device_speed speed) +{ + u32 val = readl(&dev->regs->gpioctl); + switch (speed) { + case USB_SPEED_SUPER: /* green + red */ + val |= BIT(GPIO0_DATA) | BIT(GPIO1_DATA); + break; + case USB_SPEED_HIGH: /* green */ + val &= ~BIT(GPIO0_DATA); + val |= BIT(GPIO1_DATA); + break; + case USB_SPEED_FULL: /* red */ + val &= ~BIT(GPIO1_DATA); + val |= BIT(GPIO0_DATA); + break; + default: /* (off/black) */ + val &= ~(BIT(GPIO1_DATA) | BIT(GPIO0_DATA)); + break; + } + writel(val, &dev->regs->gpioctl); +} + +/* indicate power with LED 2 */ +static inline void net2280_led_active(struct net2280 *dev, int is_active) +{ + u32 val = readl(&dev->regs->gpioctl); + + /* FIXME this LED never seems to turn on.*/ + if (is_active) + val |= GPIO2_DATA; + else + val &= ~GPIO2_DATA; + writel(val, &dev->regs->gpioctl); +} + +static inline void net2280_led_shutdown(struct net2280 *dev) +{ + /* turn off all four GPIO*_DATA bits */ + writel(readl(&dev->regs->gpioctl) & ~0x0f, + &dev->regs->gpioctl); +} + +#else + +#define net2280_led_init(dev) do { } while (0) +#define net2280_led_speed(dev, speed) do { } while (0) +#define net2280_led_shutdown(dev) do { } while (0) + +#endif + +/*-------------------------------------------------------------------------*/ + +#define ep_dbg(ndev, fmt, args...) \ + dev_dbg((&((ndev)->pdev->dev)), fmt, ##args) + +#define ep_vdbg(ndev, fmt, args...) \ + dev_vdbg((&((ndev)->pdev->dev)), fmt, ##args) + +#define ep_info(ndev, fmt, args...) \ + dev_info((&((ndev)->pdev->dev)), fmt, ##args) + +#define ep_warn(ndev, fmt, args...) \ + dev_warn((&((ndev)->pdev->dev)), fmt, ##args) + +#define ep_err(ndev, fmt, args...) \ + dev_err((&((ndev)->pdev->dev)), fmt, ##args) + +/*-------------------------------------------------------------------------*/ + +static inline void set_fifo_bytecount(struct net2280_ep *ep, unsigned count) +{ + if (ep->dev->pdev->vendor == 0x17cc) + writeb(count, 2 + (u8 __iomem *) &ep->regs->ep_cfg); + else{ + u32 tmp = readl(&ep->cfg->ep_cfg) & + (~(0x07 << EP_FIFO_BYTE_COUNT)); + writel(tmp | (count << EP_FIFO_BYTE_COUNT), &ep->cfg->ep_cfg); + } +} + +static inline void start_out_naking(struct net2280_ep *ep) +{ + /* NOTE: hardware races lurk here, and PING protocol issues */ + writel(BIT(SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp); + /* synch with device */ + readl(&ep->regs->ep_rsp); +} + +static inline void stop_out_naking(struct net2280_ep *ep) +{ + u32 tmp; + + tmp = readl(&ep->regs->ep_stat); + if ((tmp & BIT(NAK_OUT_PACKETS)) != 0) + writel(BIT(CLEAR_NAK_OUT_PACKETS), &ep->regs->ep_rsp); +} + + +static inline void set_max_speed(struct net2280_ep *ep, u32 max) +{ + u32 reg; + static const u32 ep_enhanced[9] = { 0x10, 0x60, 0x30, 0x80, + 0x50, 0x20, 0x70, 0x40, 0x90 }; + + if (ep->dev->enhanced_mode) { + reg = ep_enhanced[ep->num]; + switch (ep->dev->gadget.speed) { + case USB_SPEED_SUPER: + reg += 2; + break; + case USB_SPEED_FULL: + reg += 1; + break; + case USB_SPEED_HIGH: + default: + break; + } + } else { + reg = (ep->num + 1) * 0x10; + if (ep->dev->gadget.speed != USB_SPEED_HIGH) + reg += 1; + } + + set_idx_reg(ep->dev->regs, reg, max); +} + +#endif /* __KERNEL__ */ diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c new file mode 100644 index 000000000..f660ebfa1 --- /dev/null +++ b/drivers/usb/gadget/udc/omap_udc.c @@ -0,0 +1,3018 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * omap_udc.c -- for OMAP full speed udc; most chips support OTG. + * + * Copyright (C) 2004 Texas Instruments, Inc. + * Copyright (C) 2004-2005 David Brownell + * + * OMAP2 & DMA support by Kyungmin Park <kyungmin.park@samsung.com> + */ + +#undef DEBUG +#undef VERBOSE + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/mm.h> +#include <linux/moduleparam.h> +#include <linux/platform_device.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/otg.h> +#include <linux/dma-mapping.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/prefetch.h> +#include <linux/io.h> + +#include <asm/byteorder.h> +#include <asm/irq.h> +#include <asm/unaligned.h> +#include <asm/mach-types.h> + +#include <linux/omap-dma.h> +#include <linux/platform_data/usb-omap1.h> + +#include <linux/soc/ti/omap1-usb.h> +#include <linux/soc/ti/omap1-soc.h> +#include <linux/soc/ti/omap1-io.h> + +#include "omap_udc.h" + +#undef USB_TRACE + +/* bulk DMA seems to be behaving for both IN and OUT */ +#define USE_DMA + +/* ISO too */ +#define USE_ISO + +#define DRIVER_DESC "OMAP UDC driver" +#define DRIVER_VERSION "4 October 2004" + +#define OMAP_DMA_USB_W2FC_TX0 29 +#define OMAP_DMA_USB_W2FC_RX0 26 + +/* + * The OMAP UDC needs _very_ early endpoint setup: before enabling the + * D+ pullup to allow enumeration. That's too early for the gadget + * framework to use from usb_endpoint_enable(), which happens after + * enumeration as part of activating an interface. (But if we add an + * optional new "UDC not yet running" state to the gadget driver model, + * even just during driver binding, the endpoint autoconfig logic is the + * natural spot to manufacture new endpoints.) + * + * So instead of using endpoint enable calls to control the hardware setup, + * this driver defines a "fifo mode" parameter. It's used during driver + * initialization to choose among a set of pre-defined endpoint configs. + * See omap_udc_setup() for available modes, or to add others. That code + * lives in an init section, so use this driver as a module if you need + * to change the fifo mode after the kernel boots. + * + * Gadget drivers normally ignore endpoints they don't care about, and + * won't include them in configuration descriptors. That means only + * misbehaving hosts would even notice they exist. + */ +#ifdef USE_ISO +static unsigned fifo_mode = 3; +#else +static unsigned fifo_mode; +#endif + +/* "modprobe omap_udc fifo_mode=42", or else as a kernel + * boot parameter "omap_udc:fifo_mode=42" + */ +module_param(fifo_mode, uint, 0); +MODULE_PARM_DESC(fifo_mode, "endpoint configuration"); + +#ifdef USE_DMA +static bool use_dma = 1; + +/* "modprobe omap_udc use_dma=y", or else as a kernel + * boot parameter "omap_udc:use_dma=y" + */ +module_param(use_dma, bool, 0); +MODULE_PARM_DESC(use_dma, "enable/disable DMA"); +#else /* !USE_DMA */ + +/* save a bit of code */ +#define use_dma 0 +#endif /* !USE_DMA */ + + +static const char driver_name[] = "omap_udc"; +static const char driver_desc[] = DRIVER_DESC; + +/*-------------------------------------------------------------------------*/ + +/* there's a notion of "current endpoint" for modifying endpoint + * state, and PIO access to its FIFO. + */ + +static void use_ep(struct omap_ep *ep, u16 select) +{ + u16 num = ep->bEndpointAddress & 0x0f; + + if (ep->bEndpointAddress & USB_DIR_IN) + num |= UDC_EP_DIR; + omap_writew(num | select, UDC_EP_NUM); + /* when select, MUST deselect later !! */ +} + +static inline void deselect_ep(void) +{ + u16 w; + + w = omap_readw(UDC_EP_NUM); + w &= ~UDC_EP_SEL; + omap_writew(w, UDC_EP_NUM); + /* 6 wait states before TX will happen */ +} + +static void dma_channel_claim(struct omap_ep *ep, unsigned preferred); + +/*-------------------------------------------------------------------------*/ + +static int omap_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct omap_ep *ep = container_of(_ep, struct omap_ep, ep); + struct omap_udc *udc; + unsigned long flags; + u16 maxp; + + /* catch various bogus parameters */ + if (!_ep || !desc + || desc->bDescriptorType != USB_DT_ENDPOINT + || ep->bEndpointAddress != desc->bEndpointAddress + || ep->maxpacket < usb_endpoint_maxp(desc)) { + DBG("%s, bad ep or descriptor\n", __func__); + return -EINVAL; + } + maxp = usb_endpoint_maxp(desc); + if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK + && maxp != ep->maxpacket) + || usb_endpoint_maxp(desc) > ep->maxpacket + || !desc->wMaxPacketSize) { + DBG("%s, bad %s maxpacket\n", __func__, _ep->name); + return -ERANGE; + } + +#ifdef USE_ISO + if ((desc->bmAttributes == USB_ENDPOINT_XFER_ISOC + && desc->bInterval != 1)) { + /* hardware wants period = 1; USB allows 2^(Interval-1) */ + DBG("%s, unsupported ISO period %dms\n", _ep->name, + 1 << (desc->bInterval - 1)); + return -EDOM; + } +#else + if (desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + DBG("%s, ISO nyet\n", _ep->name); + return -EDOM; + } +#endif + + /* xfer types must match, except that interrupt ~= bulk */ + if (ep->bmAttributes != desc->bmAttributes + && ep->bmAttributes != USB_ENDPOINT_XFER_BULK + && desc->bmAttributes != USB_ENDPOINT_XFER_INT) { + DBG("%s, %s type mismatch\n", __func__, _ep->name); + return -EINVAL; + } + + udc = ep->udc; + if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) { + DBG("%s, bogus device state\n", __func__); + return -ESHUTDOWN; + } + + spin_lock_irqsave(&udc->lock, flags); + + ep->ep.desc = desc; + ep->irqs = 0; + ep->stopped = 0; + ep->ep.maxpacket = maxp; + + /* set endpoint to initial state */ + ep->dma_channel = 0; + ep->has_dma = 0; + ep->lch = -1; + use_ep(ep, UDC_EP_SEL); + omap_writew(udc->clr_halt, UDC_CTRL); + ep->ackwait = 0; + deselect_ep(); + + if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) + list_add(&ep->iso, &udc->iso); + + /* maybe assign a DMA channel to this endpoint */ + if (use_dma && desc->bmAttributes == USB_ENDPOINT_XFER_BULK) + /* FIXME ISO can dma, but prefers first channel */ + dma_channel_claim(ep, 0); + + /* PIO OUT may RX packets */ + if (desc->bmAttributes != USB_ENDPOINT_XFER_ISOC + && !ep->has_dma + && !(ep->bEndpointAddress & USB_DIR_IN)) { + omap_writew(UDC_SET_FIFO_EN, UDC_CTRL); + ep->ackwait = 1 + ep->double_buf; + } + + spin_unlock_irqrestore(&udc->lock, flags); + VDBG("%s enabled\n", _ep->name); + return 0; +} + +static void nuke(struct omap_ep *, int status); + +static int omap_ep_disable(struct usb_ep *_ep) +{ + struct omap_ep *ep = container_of(_ep, struct omap_ep, ep); + unsigned long flags; + + if (!_ep || !ep->ep.desc) { + DBG("%s, %s not enabled\n", __func__, + _ep ? ep->ep.name : NULL); + return -EINVAL; + } + + spin_lock_irqsave(&ep->udc->lock, flags); + ep->ep.desc = NULL; + nuke(ep, -ESHUTDOWN); + ep->ep.maxpacket = ep->maxpacket; + ep->has_dma = 0; + omap_writew(UDC_SET_HALT, UDC_CTRL); + list_del_init(&ep->iso); + del_timer(&ep->timer); + + spin_unlock_irqrestore(&ep->udc->lock, flags); + + VDBG("%s disabled\n", _ep->name); + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static struct usb_request * +omap_alloc_request(struct usb_ep *ep, gfp_t gfp_flags) +{ + struct omap_req *req; + + req = kzalloc(sizeof(*req), gfp_flags); + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->queue); + + return &req->req; +} + +static void +omap_free_request(struct usb_ep *ep, struct usb_request *_req) +{ + struct omap_req *req = container_of(_req, struct omap_req, req); + + kfree(req); +} + +/*-------------------------------------------------------------------------*/ + +static void +done(struct omap_ep *ep, struct omap_req *req, int status) +{ + struct omap_udc *udc = ep->udc; + unsigned stopped = ep->stopped; + + list_del_init(&req->queue); + + if (req->req.status == -EINPROGRESS) + req->req.status = status; + else + status = req->req.status; + + if (use_dma && ep->has_dma) + usb_gadget_unmap_request(&udc->gadget, &req->req, + (ep->bEndpointAddress & USB_DIR_IN)); + +#ifndef USB_TRACE + if (status && status != -ESHUTDOWN) +#endif + VDBG("complete %s req %p stat %d len %u/%u\n", + ep->ep.name, &req->req, status, + req->req.actual, req->req.length); + + /* don't modify queue heads during completion callback */ + ep->stopped = 1; + spin_unlock(&ep->udc->lock); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&ep->udc->lock); + ep->stopped = stopped; +} + +/*-------------------------------------------------------------------------*/ + +#define UDC_FIFO_FULL (UDC_NON_ISO_FIFO_FULL | UDC_ISO_FIFO_FULL) +#define UDC_FIFO_UNWRITABLE (UDC_EP_HALTED | UDC_FIFO_FULL) + +#define FIFO_EMPTY (UDC_NON_ISO_FIFO_EMPTY | UDC_ISO_FIFO_EMPTY) +#define FIFO_UNREADABLE (UDC_EP_HALTED | FIFO_EMPTY) + +static inline int +write_packet(u8 *buf, struct omap_req *req, unsigned max) +{ + unsigned len; + u16 *wp; + + len = min(req->req.length - req->req.actual, max); + req->req.actual += len; + + max = len; + if (likely((((int)buf) & 1) == 0)) { + wp = (u16 *)buf; + while (max >= 2) { + omap_writew(*wp++, UDC_DATA); + max -= 2; + } + buf = (u8 *)wp; + } + while (max--) + omap_writeb(*buf++, UDC_DATA); + return len; +} + +/* FIXME change r/w fifo calling convention */ + + +/* return: 0 = still running, 1 = completed, negative = errno */ +static int write_fifo(struct omap_ep *ep, struct omap_req *req) +{ + u8 *buf; + unsigned count; + int is_last; + u16 ep_stat; + + buf = req->req.buf + req->req.actual; + prefetch(buf); + + /* PIO-IN isn't double buffered except for iso */ + ep_stat = omap_readw(UDC_STAT_FLG); + if (ep_stat & UDC_FIFO_UNWRITABLE) + return 0; + + count = ep->ep.maxpacket; + count = write_packet(buf, req, count); + omap_writew(UDC_SET_FIFO_EN, UDC_CTRL); + ep->ackwait = 1; + + /* last packet is often short (sometimes a zlp) */ + if (count != ep->ep.maxpacket) + is_last = 1; + else if (req->req.length == req->req.actual + && !req->req.zero) + is_last = 1; + else + is_last = 0; + + /* NOTE: requests complete when all IN data is in a + * FIFO (or sometimes later, if a zlp was needed). + * Use usb_ep_fifo_status() where needed. + */ + if (is_last) + done(ep, req, 0); + return is_last; +} + +static inline int +read_packet(u8 *buf, struct omap_req *req, unsigned avail) +{ + unsigned len; + u16 *wp; + + len = min(req->req.length - req->req.actual, avail); + req->req.actual += len; + avail = len; + + if (likely((((int)buf) & 1) == 0)) { + wp = (u16 *)buf; + while (avail >= 2) { + *wp++ = omap_readw(UDC_DATA); + avail -= 2; + } + buf = (u8 *)wp; + } + while (avail--) + *buf++ = omap_readb(UDC_DATA); + return len; +} + +/* return: 0 = still running, 1 = queue empty, negative = errno */ +static int read_fifo(struct omap_ep *ep, struct omap_req *req) +{ + u8 *buf; + unsigned count, avail; + int is_last; + + buf = req->req.buf + req->req.actual; + prefetchw(buf); + + for (;;) { + u16 ep_stat = omap_readw(UDC_STAT_FLG); + + is_last = 0; + if (ep_stat & FIFO_EMPTY) { + if (!ep->double_buf) + break; + ep->fnf = 1; + } + if (ep_stat & UDC_EP_HALTED) + break; + + if (ep_stat & UDC_FIFO_FULL) + avail = ep->ep.maxpacket; + else { + avail = omap_readw(UDC_RXFSTAT); + ep->fnf = ep->double_buf; + } + count = read_packet(buf, req, avail); + + /* partial packet reads may not be errors */ + if (count < ep->ep.maxpacket) { + is_last = 1; + /* overflowed this request? flush extra data */ + if (count != avail) { + req->req.status = -EOVERFLOW; + avail -= count; + while (avail--) + omap_readw(UDC_DATA); + } + } else if (req->req.length == req->req.actual) + is_last = 1; + else + is_last = 0; + + if (!ep->bEndpointAddress) + break; + if (is_last) + done(ep, req, 0); + break; + } + return is_last; +} + +/*-------------------------------------------------------------------------*/ + +static u16 dma_src_len(struct omap_ep *ep, dma_addr_t start) +{ + dma_addr_t end; + + /* IN-DMA needs this on fault/cancel paths, so 15xx misreports + * the last transfer's bytecount by more than a FIFO's worth. + */ + if (cpu_is_omap15xx()) + return 0; + + end = omap_get_dma_src_pos(ep->lch); + if (end == ep->dma_counter) + return 0; + + end |= start & (0xffff << 16); + if (end < start) + end += 0x10000; + return end - start; +} + +static u16 dma_dest_len(struct omap_ep *ep, dma_addr_t start) +{ + dma_addr_t end; + + end = omap_get_dma_dst_pos(ep->lch); + if (end == ep->dma_counter) + return 0; + + end |= start & (0xffff << 16); + if (cpu_is_omap15xx()) + end++; + if (end < start) + end += 0x10000; + return end - start; +} + + +/* Each USB transfer request using DMA maps to one or more DMA transfers. + * When DMA completion isn't request completion, the UDC continues with + * the next DMA transfer for that USB transfer. + */ + +static void next_in_dma(struct omap_ep *ep, struct omap_req *req) +{ + u16 txdma_ctrl, w; + unsigned length = req->req.length - req->req.actual; + const int sync_mode = cpu_is_omap15xx() + ? OMAP_DMA_SYNC_FRAME + : OMAP_DMA_SYNC_ELEMENT; + int dma_trigger = 0; + + /* measure length in either bytes or packets */ + if ((cpu_is_omap16xx() && length <= UDC_TXN_TSC) + || (cpu_is_omap15xx() && length < ep->maxpacket)) { + txdma_ctrl = UDC_TXN_EOT | length; + omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8, + length, 1, sync_mode, dma_trigger, 0); + } else { + length = min(length / ep->maxpacket, + (unsigned) UDC_TXN_TSC + 1); + txdma_ctrl = length; + omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16, + ep->ep.maxpacket >> 1, length, sync_mode, + dma_trigger, 0); + length *= ep->maxpacket; + } + omap_set_dma_src_params(ep->lch, OMAP_DMA_PORT_EMIFF, + OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual, + 0, 0); + + omap_start_dma(ep->lch); + ep->dma_counter = omap_get_dma_src_pos(ep->lch); + w = omap_readw(UDC_DMA_IRQ_EN); + w |= UDC_TX_DONE_IE(ep->dma_channel); + omap_writew(w, UDC_DMA_IRQ_EN); + omap_writew(UDC_TXN_START | txdma_ctrl, UDC_TXDMA(ep->dma_channel)); + req->dma_bytes = length; +} + +static void finish_in_dma(struct omap_ep *ep, struct omap_req *req, int status) +{ + u16 w; + + if (status == 0) { + req->req.actual += req->dma_bytes; + + /* return if this request needs to send data or zlp */ + if (req->req.actual < req->req.length) + return; + if (req->req.zero + && req->dma_bytes != 0 + && (req->req.actual % ep->maxpacket) == 0) + return; + } else + req->req.actual += dma_src_len(ep, req->req.dma + + req->req.actual); + + /* tx completion */ + omap_stop_dma(ep->lch); + w = omap_readw(UDC_DMA_IRQ_EN); + w &= ~UDC_TX_DONE_IE(ep->dma_channel); + omap_writew(w, UDC_DMA_IRQ_EN); + done(ep, req, status); +} + +static void next_out_dma(struct omap_ep *ep, struct omap_req *req) +{ + unsigned packets = req->req.length - req->req.actual; + int dma_trigger = 0; + u16 w; + + /* set up this DMA transfer, enable the fifo, start */ + packets /= ep->ep.maxpacket; + packets = min(packets, (unsigned)UDC_RXN_TC + 1); + req->dma_bytes = packets * ep->ep.maxpacket; + omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16, + ep->ep.maxpacket >> 1, packets, + OMAP_DMA_SYNC_ELEMENT, + dma_trigger, 0); + omap_set_dma_dest_params(ep->lch, OMAP_DMA_PORT_EMIFF, + OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual, + 0, 0); + ep->dma_counter = omap_get_dma_dst_pos(ep->lch); + + omap_writew(UDC_RXN_STOP | (packets - 1), UDC_RXDMA(ep->dma_channel)); + w = omap_readw(UDC_DMA_IRQ_EN); + w |= UDC_RX_EOT_IE(ep->dma_channel); + omap_writew(w, UDC_DMA_IRQ_EN); + omap_writew(ep->bEndpointAddress & 0xf, UDC_EP_NUM); + omap_writew(UDC_SET_FIFO_EN, UDC_CTRL); + + omap_start_dma(ep->lch); +} + +static void +finish_out_dma(struct omap_ep *ep, struct omap_req *req, int status, int one) +{ + u16 count, w; + + if (status == 0) + ep->dma_counter = (u16) (req->req.dma + req->req.actual); + count = dma_dest_len(ep, req->req.dma + req->req.actual); + count += req->req.actual; + if (one) + count--; + if (count <= req->req.length) + req->req.actual = count; + + if (count != req->dma_bytes || status) + omap_stop_dma(ep->lch); + + /* if this wasn't short, request may need another transfer */ + else if (req->req.actual < req->req.length) + return; + + /* rx completion */ + w = omap_readw(UDC_DMA_IRQ_EN); + w &= ~UDC_RX_EOT_IE(ep->dma_channel); + omap_writew(w, UDC_DMA_IRQ_EN); + done(ep, req, status); +} + +static void dma_irq(struct omap_udc *udc, u16 irq_src) +{ + u16 dman_stat = omap_readw(UDC_DMAN_STAT); + struct omap_ep *ep; + struct omap_req *req; + + /* IN dma: tx to host */ + if (irq_src & UDC_TXN_DONE) { + ep = &udc->ep[16 + UDC_DMA_TX_SRC(dman_stat)]; + ep->irqs++; + /* can see TXN_DONE after dma abort */ + if (!list_empty(&ep->queue)) { + req = container_of(ep->queue.next, + struct omap_req, queue); + finish_in_dma(ep, req, 0); + } + omap_writew(UDC_TXN_DONE, UDC_IRQ_SRC); + + if (!list_empty(&ep->queue)) { + req = container_of(ep->queue.next, + struct omap_req, queue); + next_in_dma(ep, req); + } + } + + /* OUT dma: rx from host */ + if (irq_src & UDC_RXN_EOT) { + ep = &udc->ep[UDC_DMA_RX_SRC(dman_stat)]; + ep->irqs++; + /* can see RXN_EOT after dma abort */ + if (!list_empty(&ep->queue)) { + req = container_of(ep->queue.next, + struct omap_req, queue); + finish_out_dma(ep, req, 0, dman_stat & UDC_DMA_RX_SB); + } + omap_writew(UDC_RXN_EOT, UDC_IRQ_SRC); + + if (!list_empty(&ep->queue)) { + req = container_of(ep->queue.next, + struct omap_req, queue); + next_out_dma(ep, req); + } + } + + if (irq_src & UDC_RXN_CNT) { + ep = &udc->ep[UDC_DMA_RX_SRC(dman_stat)]; + ep->irqs++; + /* omap15xx does this unasked... */ + VDBG("%s, RX_CNT irq?\n", ep->ep.name); + omap_writew(UDC_RXN_CNT, UDC_IRQ_SRC); + } +} + +static void dma_error(int lch, u16 ch_status, void *data) +{ + struct omap_ep *ep = data; + + /* if ch_status & OMAP_DMA_DROP_IRQ ... */ + /* if ch_status & OMAP1_DMA_TOUT_IRQ ... */ + ERR("%s dma error, lch %d status %02x\n", ep->ep.name, lch, ch_status); + + /* complete current transfer ... */ +} + +static void dma_channel_claim(struct omap_ep *ep, unsigned channel) +{ + u16 reg; + int status, restart, is_in; + int dma_channel; + + is_in = ep->bEndpointAddress & USB_DIR_IN; + if (is_in) + reg = omap_readw(UDC_TXDMA_CFG); + else + reg = omap_readw(UDC_RXDMA_CFG); + reg |= UDC_DMA_REQ; /* "pulse" activated */ + + ep->dma_channel = 0; + ep->lch = -1; + if (channel == 0 || channel > 3) { + if ((reg & 0x0f00) == 0) + channel = 3; + else if ((reg & 0x00f0) == 0) + channel = 2; + else if ((reg & 0x000f) == 0) /* preferred for ISO */ + channel = 1; + else { + status = -EMLINK; + goto just_restart; + } + } + reg |= (0x0f & ep->bEndpointAddress) << (4 * (channel - 1)); + ep->dma_channel = channel; + + if (is_in) { + dma_channel = OMAP_DMA_USB_W2FC_TX0 - 1 + channel; + status = omap_request_dma(dma_channel, + ep->ep.name, dma_error, ep, &ep->lch); + if (status == 0) { + omap_writew(reg, UDC_TXDMA_CFG); + /* EMIFF or SDRC */ + omap_set_dma_src_burst_mode(ep->lch, + OMAP_DMA_DATA_BURST_4); + omap_set_dma_src_data_pack(ep->lch, 1); + /* TIPB */ + omap_set_dma_dest_params(ep->lch, + OMAP_DMA_PORT_TIPB, + OMAP_DMA_AMODE_CONSTANT, + UDC_DATA_DMA, + 0, 0); + } + } else { + dma_channel = OMAP_DMA_USB_W2FC_RX0 - 1 + channel; + status = omap_request_dma(dma_channel, + ep->ep.name, dma_error, ep, &ep->lch); + if (status == 0) { + omap_writew(reg, UDC_RXDMA_CFG); + /* TIPB */ + omap_set_dma_src_params(ep->lch, + OMAP_DMA_PORT_TIPB, + OMAP_DMA_AMODE_CONSTANT, + UDC_DATA_DMA, + 0, 0); + /* EMIFF or SDRC */ + omap_set_dma_dest_burst_mode(ep->lch, + OMAP_DMA_DATA_BURST_4); + omap_set_dma_dest_data_pack(ep->lch, 1); + } + } + if (status) + ep->dma_channel = 0; + else { + ep->has_dma = 1; + omap_disable_dma_irq(ep->lch, OMAP_DMA_BLOCK_IRQ); + + /* channel type P: hw synch (fifo) */ + if (!cpu_is_omap15xx()) + omap_set_dma_channel_mode(ep->lch, OMAP_DMA_LCH_P); + } + +just_restart: + /* restart any queue, even if the claim failed */ + restart = !ep->stopped && !list_empty(&ep->queue); + + if (status) + DBG("%s no dma channel: %d%s\n", ep->ep.name, status, + restart ? " (restart)" : ""); + else + DBG("%s claimed %cxdma%d lch %d%s\n", ep->ep.name, + is_in ? 't' : 'r', + ep->dma_channel - 1, ep->lch, + restart ? " (restart)" : ""); + + if (restart) { + struct omap_req *req; + req = container_of(ep->queue.next, struct omap_req, queue); + if (ep->has_dma) + (is_in ? next_in_dma : next_out_dma)(ep, req); + else { + use_ep(ep, UDC_EP_SEL); + (is_in ? write_fifo : read_fifo)(ep, req); + deselect_ep(); + if (!is_in) { + omap_writew(UDC_SET_FIFO_EN, UDC_CTRL); + ep->ackwait = 1 + ep->double_buf; + } + /* IN: 6 wait states before it'll tx */ + } + } +} + +static void dma_channel_release(struct omap_ep *ep) +{ + int shift = 4 * (ep->dma_channel - 1); + u16 mask = 0x0f << shift; + struct omap_req *req; + int active; + + /* abort any active usb transfer request */ + if (!list_empty(&ep->queue)) + req = container_of(ep->queue.next, struct omap_req, queue); + else + req = NULL; + + active = omap_get_dma_active_status(ep->lch); + + DBG("%s release %s %cxdma%d %p\n", ep->ep.name, + active ? "active" : "idle", + (ep->bEndpointAddress & USB_DIR_IN) ? 't' : 'r', + ep->dma_channel - 1, req); + + /* NOTE: re-setting RX_REQ/TX_REQ because of a chip bug (before + * OMAP 1710 ES2.0) where reading the DMA_CFG can clear them. + */ + + /* wait till current packet DMA finishes, and fifo empties */ + if (ep->bEndpointAddress & USB_DIR_IN) { + omap_writew((omap_readw(UDC_TXDMA_CFG) & ~mask) | UDC_DMA_REQ, + UDC_TXDMA_CFG); + + if (req) { + finish_in_dma(ep, req, -ECONNRESET); + + /* clear FIFO; hosts probably won't empty it */ + use_ep(ep, UDC_EP_SEL); + omap_writew(UDC_CLR_EP, UDC_CTRL); + deselect_ep(); + } + while (omap_readw(UDC_TXDMA_CFG) & mask) + udelay(10); + } else { + omap_writew((omap_readw(UDC_RXDMA_CFG) & ~mask) | UDC_DMA_REQ, + UDC_RXDMA_CFG); + + /* dma empties the fifo */ + while (omap_readw(UDC_RXDMA_CFG) & mask) + udelay(10); + if (req) + finish_out_dma(ep, req, -ECONNRESET, 0); + } + omap_free_dma(ep->lch); + ep->dma_channel = 0; + ep->lch = -1; + /* has_dma still set, till endpoint is fully quiesced */ +} + + +/*-------------------------------------------------------------------------*/ + +static int +omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) +{ + struct omap_ep *ep = container_of(_ep, struct omap_ep, ep); + struct omap_req *req = container_of(_req, struct omap_req, req); + struct omap_udc *udc; + unsigned long flags; + int is_iso = 0; + + /* catch various bogus parameters */ + if (!_req || !req->req.complete || !req->req.buf + || !list_empty(&req->queue)) { + DBG("%s, bad params\n", __func__); + return -EINVAL; + } + if (!_ep || (!ep->ep.desc && ep->bEndpointAddress)) { + DBG("%s, bad ep\n", __func__); + return -EINVAL; + } + if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + if (req->req.length > ep->ep.maxpacket) + return -EMSGSIZE; + is_iso = 1; + } + + /* this isn't bogus, but OMAP DMA isn't the only hardware to + * have a hard time with partial packet reads... reject it. + */ + if (use_dma + && ep->has_dma + && ep->bEndpointAddress != 0 + && (ep->bEndpointAddress & USB_DIR_IN) == 0 + && (req->req.length % ep->ep.maxpacket) != 0) { + DBG("%s, no partial packet OUT reads\n", __func__); + return -EMSGSIZE; + } + + udc = ep->udc; + if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + if (use_dma && ep->has_dma) + usb_gadget_map_request(&udc->gadget, &req->req, + (ep->bEndpointAddress & USB_DIR_IN)); + + VDBG("%s queue req %p, len %d buf %p\n", + ep->ep.name, _req, _req->length, _req->buf); + + spin_lock_irqsave(&udc->lock, flags); + + req->req.status = -EINPROGRESS; + req->req.actual = 0; + + /* maybe kickstart non-iso i/o queues */ + if (is_iso) { + u16 w; + + w = omap_readw(UDC_IRQ_EN); + w |= UDC_SOF_IE; + omap_writew(w, UDC_IRQ_EN); + } else if (list_empty(&ep->queue) && !ep->stopped && !ep->ackwait) { + int is_in; + + if (ep->bEndpointAddress == 0) { + if (!udc->ep0_pending || !list_empty(&ep->queue)) { + spin_unlock_irqrestore(&udc->lock, flags); + return -EL2HLT; + } + + /* empty DATA stage? */ + is_in = udc->ep0_in; + if (!req->req.length) { + + /* chip became CONFIGURED or ADDRESSED + * earlier; drivers may already have queued + * requests to non-control endpoints + */ + if (udc->ep0_set_config) { + u16 irq_en = omap_readw(UDC_IRQ_EN); + + irq_en |= UDC_DS_CHG_IE | UDC_EP0_IE; + if (!udc->ep0_reset_config) + irq_en |= UDC_EPN_RX_IE + | UDC_EPN_TX_IE; + omap_writew(irq_en, UDC_IRQ_EN); + } + + /* STATUS for zero length DATA stages is + * always an IN ... even for IN transfers, + * a weird case which seem to stall OMAP. + */ + omap_writew(UDC_EP_SEL | UDC_EP_DIR, + UDC_EP_NUM); + omap_writew(UDC_CLR_EP, UDC_CTRL); + omap_writew(UDC_SET_FIFO_EN, UDC_CTRL); + omap_writew(UDC_EP_DIR, UDC_EP_NUM); + + /* cleanup */ + udc->ep0_pending = 0; + done(ep, req, 0); + req = NULL; + + /* non-empty DATA stage */ + } else if (is_in) { + omap_writew(UDC_EP_SEL | UDC_EP_DIR, + UDC_EP_NUM); + } else { + if (udc->ep0_setup) + goto irq_wait; + omap_writew(UDC_EP_SEL, UDC_EP_NUM); + } + } else { + is_in = ep->bEndpointAddress & USB_DIR_IN; + if (!ep->has_dma) + use_ep(ep, UDC_EP_SEL); + /* if ISO: SOF IRQs must be enabled/disabled! */ + } + + if (ep->has_dma) + (is_in ? next_in_dma : next_out_dma)(ep, req); + else if (req) { + if ((is_in ? write_fifo : read_fifo)(ep, req) == 1) + req = NULL; + deselect_ep(); + if (!is_in) { + omap_writew(UDC_SET_FIFO_EN, UDC_CTRL); + ep->ackwait = 1 + ep->double_buf; + } + /* IN: 6 wait states before it'll tx */ + } + } + +irq_wait: + /* irq handler advances the queue */ + if (req != NULL) + list_add_tail(&req->queue, &ep->queue); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static int omap_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct omap_ep *ep = container_of(_ep, struct omap_ep, ep); + struct omap_req *req = NULL, *iter; + unsigned long flags; + + if (!_ep || !_req) + return -EINVAL; + + spin_lock_irqsave(&ep->udc->lock, flags); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry(iter, &ep->queue, queue) { + if (&iter->req != _req) + continue; + req = iter; + break; + } + if (!req) { + spin_unlock_irqrestore(&ep->udc->lock, flags); + return -EINVAL; + } + + if (use_dma && ep->dma_channel && ep->queue.next == &req->queue) { + int channel = ep->dma_channel; + + /* releasing the channel cancels the request, + * reclaiming the channel restarts the queue + */ + dma_channel_release(ep); + dma_channel_claim(ep, channel); + } else + done(ep, req, -ECONNRESET); + spin_unlock_irqrestore(&ep->udc->lock, flags); + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static int omap_ep_set_halt(struct usb_ep *_ep, int value) +{ + struct omap_ep *ep = container_of(_ep, struct omap_ep, ep); + unsigned long flags; + int status = -EOPNOTSUPP; + + spin_lock_irqsave(&ep->udc->lock, flags); + + /* just use protocol stalls for ep0; real halts are annoying */ + if (ep->bEndpointAddress == 0) { + if (!ep->udc->ep0_pending) + status = -EINVAL; + else if (value) { + if (ep->udc->ep0_set_config) { + WARNING("error changing config?\n"); + omap_writew(UDC_CLR_CFG, UDC_SYSCON2); + } + omap_writew(UDC_STALL_CMD, UDC_SYSCON2); + ep->udc->ep0_pending = 0; + status = 0; + } else /* NOP */ + status = 0; + + /* otherwise, all active non-ISO endpoints can halt */ + } else if (ep->bmAttributes != USB_ENDPOINT_XFER_ISOC && ep->ep.desc) { + + /* IN endpoints must already be idle */ + if ((ep->bEndpointAddress & USB_DIR_IN) + && !list_empty(&ep->queue)) { + status = -EAGAIN; + goto done; + } + + if (value) { + int channel; + + if (use_dma && ep->dma_channel + && !list_empty(&ep->queue)) { + channel = ep->dma_channel; + dma_channel_release(ep); + } else + channel = 0; + + use_ep(ep, UDC_EP_SEL); + if (omap_readw(UDC_STAT_FLG) & UDC_NON_ISO_FIFO_EMPTY) { + omap_writew(UDC_SET_HALT, UDC_CTRL); + status = 0; + } else + status = -EAGAIN; + deselect_ep(); + + if (channel) + dma_channel_claim(ep, channel); + } else { + use_ep(ep, 0); + omap_writew(ep->udc->clr_halt, UDC_CTRL); + ep->ackwait = 0; + if (!(ep->bEndpointAddress & USB_DIR_IN)) { + omap_writew(UDC_SET_FIFO_EN, UDC_CTRL); + ep->ackwait = 1 + ep->double_buf; + } + } + } +done: + VDBG("%s %s halt stat %d\n", ep->ep.name, + value ? "set" : "clear", status); + + spin_unlock_irqrestore(&ep->udc->lock, flags); + return status; +} + +static const struct usb_ep_ops omap_ep_ops = { + .enable = omap_ep_enable, + .disable = omap_ep_disable, + + .alloc_request = omap_alloc_request, + .free_request = omap_free_request, + + .queue = omap_ep_queue, + .dequeue = omap_ep_dequeue, + + .set_halt = omap_ep_set_halt, + /* fifo_status ... report bytes in fifo */ + /* fifo_flush ... flush fifo */ +}; + +/*-------------------------------------------------------------------------*/ + +static int omap_get_frame(struct usb_gadget *gadget) +{ + u16 sof = omap_readw(UDC_SOF); + return (sof & UDC_TS_OK) ? (sof & UDC_TS) : -EL2NSYNC; +} + +static int omap_wakeup(struct usb_gadget *gadget) +{ + struct omap_udc *udc; + unsigned long flags; + int retval = -EHOSTUNREACH; + + udc = container_of(gadget, struct omap_udc, gadget); + + spin_lock_irqsave(&udc->lock, flags); + if (udc->devstat & UDC_SUS) { + /* NOTE: OTG spec erratum says that OTG devices may + * issue wakeups without host enable. + */ + if (udc->devstat & (UDC_B_HNP_ENABLE|UDC_R_WK_OK)) { + DBG("remote wakeup...\n"); + omap_writew(UDC_RMT_WKP, UDC_SYSCON2); + retval = 0; + } + + /* NOTE: non-OTG systems may use SRP TOO... */ + } else if (!(udc->devstat & UDC_ATT)) { + if (!IS_ERR_OR_NULL(udc->transceiver)) + retval = otg_start_srp(udc->transceiver->otg); + } + spin_unlock_irqrestore(&udc->lock, flags); + + return retval; +} + +static int +omap_set_selfpowered(struct usb_gadget *gadget, int is_selfpowered) +{ + struct omap_udc *udc; + unsigned long flags; + u16 syscon1; + + gadget->is_selfpowered = (is_selfpowered != 0); + udc = container_of(gadget, struct omap_udc, gadget); + spin_lock_irqsave(&udc->lock, flags); + syscon1 = omap_readw(UDC_SYSCON1); + if (is_selfpowered) + syscon1 |= UDC_SELF_PWR; + else + syscon1 &= ~UDC_SELF_PWR; + omap_writew(syscon1, UDC_SYSCON1); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static int can_pullup(struct omap_udc *udc) +{ + return udc->driver && udc->softconnect && udc->vbus_active; +} + +static void pullup_enable(struct omap_udc *udc) +{ + u16 w; + + w = omap_readw(UDC_SYSCON1); + w |= UDC_PULLUP_EN; + omap_writew(w, UDC_SYSCON1); + if (!gadget_is_otg(&udc->gadget) && !cpu_is_omap15xx()) { + u32 l; + + l = omap_readl(OTG_CTRL); + l |= OTG_BSESSVLD; + omap_writel(l, OTG_CTRL); + } + omap_writew(UDC_DS_CHG_IE, UDC_IRQ_EN); +} + +static void pullup_disable(struct omap_udc *udc) +{ + u16 w; + + if (!gadget_is_otg(&udc->gadget) && !cpu_is_omap15xx()) { + u32 l; + + l = omap_readl(OTG_CTRL); + l &= ~OTG_BSESSVLD; + omap_writel(l, OTG_CTRL); + } + omap_writew(UDC_DS_CHG_IE, UDC_IRQ_EN); + w = omap_readw(UDC_SYSCON1); + w &= ~UDC_PULLUP_EN; + omap_writew(w, UDC_SYSCON1); +} + +static struct omap_udc *udc; + +static void omap_udc_enable_clock(int enable) +{ + if (udc == NULL || udc->dc_clk == NULL || udc->hhc_clk == NULL) + return; + + if (enable) { + clk_enable(udc->dc_clk); + clk_enable(udc->hhc_clk); + udelay(100); + } else { + clk_disable(udc->hhc_clk); + clk_disable(udc->dc_clk); + } +} + +/* + * Called by whatever detects VBUS sessions: external transceiver + * driver, or maybe GPIO0 VBUS IRQ. May request 48 MHz clock. + */ +static int omap_vbus_session(struct usb_gadget *gadget, int is_active) +{ + struct omap_udc *udc; + unsigned long flags; + u32 l; + + udc = container_of(gadget, struct omap_udc, gadget); + spin_lock_irqsave(&udc->lock, flags); + VDBG("VBUS %s\n", is_active ? "on" : "off"); + udc->vbus_active = (is_active != 0); + if (cpu_is_omap15xx()) { + /* "software" detect, ignored if !VBUS_MODE_1510 */ + l = omap_readl(FUNC_MUX_CTRL_0); + if (is_active) + l |= VBUS_CTRL_1510; + else + l &= ~VBUS_CTRL_1510; + omap_writel(l, FUNC_MUX_CTRL_0); + } + if (udc->dc_clk != NULL && is_active) { + if (!udc->clk_requested) { + omap_udc_enable_clock(1); + udc->clk_requested = 1; + } + } + if (can_pullup(udc)) + pullup_enable(udc); + else + pullup_disable(udc); + if (udc->dc_clk != NULL && !is_active) { + if (udc->clk_requested) { + omap_udc_enable_clock(0); + udc->clk_requested = 0; + } + } + spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} + +static int omap_vbus_draw(struct usb_gadget *gadget, unsigned mA) +{ + struct omap_udc *udc; + + udc = container_of(gadget, struct omap_udc, gadget); + if (!IS_ERR_OR_NULL(udc->transceiver)) + return usb_phy_set_power(udc->transceiver, mA); + return -EOPNOTSUPP; +} + +static int omap_pullup(struct usb_gadget *gadget, int is_on) +{ + struct omap_udc *udc; + unsigned long flags; + + udc = container_of(gadget, struct omap_udc, gadget); + spin_lock_irqsave(&udc->lock, flags); + udc->softconnect = (is_on != 0); + if (can_pullup(udc)) + pullup_enable(udc); + else + pullup_disable(udc); + spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} + +static int omap_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver); +static int omap_udc_stop(struct usb_gadget *g); + +static const struct usb_gadget_ops omap_gadget_ops = { + .get_frame = omap_get_frame, + .wakeup = omap_wakeup, + .set_selfpowered = omap_set_selfpowered, + .vbus_session = omap_vbus_session, + .vbus_draw = omap_vbus_draw, + .pullup = omap_pullup, + .udc_start = omap_udc_start, + .udc_stop = omap_udc_stop, +}; + +/*-------------------------------------------------------------------------*/ + +/* dequeue ALL requests; caller holds udc->lock */ +static void nuke(struct omap_ep *ep, int status) +{ + struct omap_req *req; + + ep->stopped = 1; + + if (use_dma && ep->dma_channel) + dma_channel_release(ep); + + use_ep(ep, 0); + omap_writew(UDC_CLR_EP, UDC_CTRL); + if (ep->bEndpointAddress && ep->bmAttributes != USB_ENDPOINT_XFER_ISOC) + omap_writew(UDC_SET_HALT, UDC_CTRL); + + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct omap_req, queue); + done(ep, req, status); + } +} + +/* caller holds udc->lock */ +static void udc_quiesce(struct omap_udc *udc) +{ + struct omap_ep *ep; + + udc->gadget.speed = USB_SPEED_UNKNOWN; + nuke(&udc->ep[0], -ESHUTDOWN); + list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) + nuke(ep, -ESHUTDOWN); +} + +/*-------------------------------------------------------------------------*/ + +static void update_otg(struct omap_udc *udc) +{ + u16 devstat; + + if (!gadget_is_otg(&udc->gadget)) + return; + + if (omap_readl(OTG_CTRL) & OTG_ID) + devstat = omap_readw(UDC_DEVSTAT); + else + devstat = 0; + + udc->gadget.b_hnp_enable = !!(devstat & UDC_B_HNP_ENABLE); + udc->gadget.a_hnp_support = !!(devstat & UDC_A_HNP_SUPPORT); + udc->gadget.a_alt_hnp_support = !!(devstat & UDC_A_ALT_HNP_SUPPORT); + + /* Enable HNP early, avoiding races on suspend irq path. + * ASSUMES OTG state machine B_BUS_REQ input is true. + */ + if (udc->gadget.b_hnp_enable) { + u32 l; + + l = omap_readl(OTG_CTRL); + l |= OTG_B_HNPEN | OTG_B_BUSREQ; + l &= ~OTG_PULLUP; + omap_writel(l, OTG_CTRL); + } +} + +static void ep0_irq(struct omap_udc *udc, u16 irq_src) +{ + struct omap_ep *ep0 = &udc->ep[0]; + struct omap_req *req = NULL; + + ep0->irqs++; + + /* Clear any pending requests and then scrub any rx/tx state + * before starting to handle the SETUP request. + */ + if (irq_src & UDC_SETUP) { + u16 ack = irq_src & (UDC_EP0_TX|UDC_EP0_RX); + + nuke(ep0, 0); + if (ack) { + omap_writew(ack, UDC_IRQ_SRC); + irq_src = UDC_SETUP; + } + } + + /* IN/OUT packets mean we're in the DATA or STATUS stage. + * This driver uses only uses protocol stalls (ep0 never halts), + * and if we got this far the gadget driver already had a + * chance to stall. Tries to be forgiving of host oddities. + * + * NOTE: the last chance gadget drivers have to stall control + * requests is during their request completion callback. + */ + if (!list_empty(&ep0->queue)) + req = container_of(ep0->queue.next, struct omap_req, queue); + + /* IN == TX to host */ + if (irq_src & UDC_EP0_TX) { + int stat; + + omap_writew(UDC_EP0_TX, UDC_IRQ_SRC); + omap_writew(UDC_EP_SEL|UDC_EP_DIR, UDC_EP_NUM); + stat = omap_readw(UDC_STAT_FLG); + if (stat & UDC_ACK) { + if (udc->ep0_in) { + /* write next IN packet from response, + * or set up the status stage. + */ + if (req) + stat = write_fifo(ep0, req); + omap_writew(UDC_EP_DIR, UDC_EP_NUM); + if (!req && udc->ep0_pending) { + omap_writew(UDC_EP_SEL, UDC_EP_NUM); + omap_writew(UDC_CLR_EP, UDC_CTRL); + omap_writew(UDC_SET_FIFO_EN, UDC_CTRL); + omap_writew(0, UDC_EP_NUM); + udc->ep0_pending = 0; + } /* else: 6 wait states before it'll tx */ + } else { + /* ack status stage of OUT transfer */ + omap_writew(UDC_EP_DIR, UDC_EP_NUM); + if (req) + done(ep0, req, 0); + } + req = NULL; + } else if (stat & UDC_STALL) { + omap_writew(UDC_CLR_HALT, UDC_CTRL); + omap_writew(UDC_EP_DIR, UDC_EP_NUM); + } else { + omap_writew(UDC_EP_DIR, UDC_EP_NUM); + } + } + + /* OUT == RX from host */ + if (irq_src & UDC_EP0_RX) { + int stat; + + omap_writew(UDC_EP0_RX, UDC_IRQ_SRC); + omap_writew(UDC_EP_SEL, UDC_EP_NUM); + stat = omap_readw(UDC_STAT_FLG); + if (stat & UDC_ACK) { + if (!udc->ep0_in) { + stat = 0; + /* read next OUT packet of request, maybe + * reactivating the fifo; stall on errors. + */ + stat = read_fifo(ep0, req); + if (!req || stat < 0) { + omap_writew(UDC_STALL_CMD, UDC_SYSCON2); + udc->ep0_pending = 0; + stat = 0; + } else if (stat == 0) + omap_writew(UDC_SET_FIFO_EN, UDC_CTRL); + omap_writew(0, UDC_EP_NUM); + + /* activate status stage */ + if (stat == 1) { + done(ep0, req, 0); + /* that may have STALLed ep0... */ + omap_writew(UDC_EP_SEL | UDC_EP_DIR, + UDC_EP_NUM); + omap_writew(UDC_CLR_EP, UDC_CTRL); + omap_writew(UDC_SET_FIFO_EN, UDC_CTRL); + omap_writew(UDC_EP_DIR, UDC_EP_NUM); + udc->ep0_pending = 0; + } + } else { + /* ack status stage of IN transfer */ + omap_writew(0, UDC_EP_NUM); + if (req) + done(ep0, req, 0); + } + } else if (stat & UDC_STALL) { + omap_writew(UDC_CLR_HALT, UDC_CTRL); + omap_writew(0, UDC_EP_NUM); + } else { + omap_writew(0, UDC_EP_NUM); + } + } + + /* SETUP starts all control transfers */ + if (irq_src & UDC_SETUP) { + union u { + u16 word[4]; + struct usb_ctrlrequest r; + } u; + int status = -EINVAL; + struct omap_ep *ep; + + /* read the (latest) SETUP message */ + do { + omap_writew(UDC_SETUP_SEL, UDC_EP_NUM); + /* two bytes at a time */ + u.word[0] = omap_readw(UDC_DATA); + u.word[1] = omap_readw(UDC_DATA); + u.word[2] = omap_readw(UDC_DATA); + u.word[3] = omap_readw(UDC_DATA); + omap_writew(0, UDC_EP_NUM); + } while (omap_readw(UDC_IRQ_SRC) & UDC_SETUP); + +#define w_value le16_to_cpu(u.r.wValue) +#define w_index le16_to_cpu(u.r.wIndex) +#define w_length le16_to_cpu(u.r.wLength) + + /* Delegate almost all control requests to the gadget driver, + * except for a handful of ch9 status/feature requests that + * hardware doesn't autodecode _and_ the gadget API hides. + */ + udc->ep0_in = (u.r.bRequestType & USB_DIR_IN) != 0; + udc->ep0_set_config = 0; + udc->ep0_pending = 1; + ep0->stopped = 0; + ep0->ackwait = 0; + switch (u.r.bRequest) { + case USB_REQ_SET_CONFIGURATION: + /* udc needs to know when ep != 0 is valid */ + if (u.r.bRequestType != USB_RECIP_DEVICE) + goto delegate; + if (w_length != 0) + goto do_stall; + udc->ep0_set_config = 1; + udc->ep0_reset_config = (w_value == 0); + VDBG("set config %d\n", w_value); + + /* update udc NOW since gadget driver may start + * queueing requests immediately; clear config + * later if it fails the request. + */ + if (udc->ep0_reset_config) + omap_writew(UDC_CLR_CFG, UDC_SYSCON2); + else + omap_writew(UDC_DEV_CFG, UDC_SYSCON2); + update_otg(udc); + goto delegate; + case USB_REQ_CLEAR_FEATURE: + /* clear endpoint halt */ + if (u.r.bRequestType != USB_RECIP_ENDPOINT) + goto delegate; + if (w_value != USB_ENDPOINT_HALT + || w_length != 0) + goto do_stall; + ep = &udc->ep[w_index & 0xf]; + if (ep != ep0) { + if (w_index & USB_DIR_IN) + ep += 16; + if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC + || !ep->ep.desc) + goto do_stall; + use_ep(ep, 0); + omap_writew(udc->clr_halt, UDC_CTRL); + ep->ackwait = 0; + if (!(ep->bEndpointAddress & USB_DIR_IN)) { + omap_writew(UDC_SET_FIFO_EN, UDC_CTRL); + ep->ackwait = 1 + ep->double_buf; + } + /* NOTE: assumes the host behaves sanely, + * only clearing real halts. Else we may + * need to kill pending transfers and then + * restart the queue... very messy for DMA! + */ + } + VDBG("%s halt cleared by host\n", ep->name); + goto ep0out_status_stage; + case USB_REQ_SET_FEATURE: + /* set endpoint halt */ + if (u.r.bRequestType != USB_RECIP_ENDPOINT) + goto delegate; + if (w_value != USB_ENDPOINT_HALT + || w_length != 0) + goto do_stall; + ep = &udc->ep[w_index & 0xf]; + if (w_index & USB_DIR_IN) + ep += 16; + if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC + || ep == ep0 || !ep->ep.desc) + goto do_stall; + if (use_dma && ep->has_dma) { + /* this has rude side-effects (aborts) and + * can't really work if DMA-IN is active + */ + DBG("%s host set_halt, NYET\n", ep->name); + goto do_stall; + } + use_ep(ep, 0); + /* can't halt if fifo isn't empty... */ + omap_writew(UDC_CLR_EP, UDC_CTRL); + omap_writew(UDC_SET_HALT, UDC_CTRL); + VDBG("%s halted by host\n", ep->name); +ep0out_status_stage: + status = 0; + omap_writew(UDC_EP_SEL|UDC_EP_DIR, UDC_EP_NUM); + omap_writew(UDC_CLR_EP, UDC_CTRL); + omap_writew(UDC_SET_FIFO_EN, UDC_CTRL); + omap_writew(UDC_EP_DIR, UDC_EP_NUM); + udc->ep0_pending = 0; + break; + case USB_REQ_GET_STATUS: + /* USB_ENDPOINT_HALT status? */ + if (u.r.bRequestType != (USB_DIR_IN|USB_RECIP_ENDPOINT)) + goto intf_status; + + /* ep0 never stalls */ + if (!(w_index & 0xf)) + goto zero_status; + + /* only active endpoints count */ + ep = &udc->ep[w_index & 0xf]; + if (w_index & USB_DIR_IN) + ep += 16; + if (!ep->ep.desc) + goto do_stall; + + /* iso never stalls */ + if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) + goto zero_status; + + /* FIXME don't assume non-halted endpoints!! */ + ERR("%s status, can't report\n", ep->ep.name); + goto do_stall; + +intf_status: + /* return interface status. if we were pedantic, + * we'd detect non-existent interfaces, and stall. + */ + if (u.r.bRequestType + != (USB_DIR_IN|USB_RECIP_INTERFACE)) + goto delegate; + +zero_status: + /* return two zero bytes */ + omap_writew(UDC_EP_SEL|UDC_EP_DIR, UDC_EP_NUM); + omap_writew(0, UDC_DATA); + omap_writew(UDC_SET_FIFO_EN, UDC_CTRL); + omap_writew(UDC_EP_DIR, UDC_EP_NUM); + status = 0; + VDBG("GET_STATUS, interface %d\n", w_index); + /* next, status stage */ + break; + default: +delegate: + /* activate the ep0out fifo right away */ + if (!udc->ep0_in && w_length) { + omap_writew(0, UDC_EP_NUM); + omap_writew(UDC_SET_FIFO_EN, UDC_CTRL); + } + + /* gadget drivers see class/vendor specific requests, + * {SET,GET}_{INTERFACE,DESCRIPTOR,CONFIGURATION}, + * and more + */ + VDBG("SETUP %02x.%02x v%04x i%04x l%04x\n", + u.r.bRequestType, u.r.bRequest, + w_value, w_index, w_length); + +#undef w_value +#undef w_index +#undef w_length + + /* The gadget driver may return an error here, + * causing an immediate protocol stall. + * + * Else it must issue a response, either queueing a + * response buffer for the DATA stage, or halting ep0 + * (causing a protocol stall, not a real halt). A + * zero length buffer means no DATA stage. + * + * It's fine to issue that response after the setup() + * call returns, and this IRQ was handled. + */ + udc->ep0_setup = 1; + spin_unlock(&udc->lock); + status = udc->driver->setup(&udc->gadget, &u.r); + spin_lock(&udc->lock); + udc->ep0_setup = 0; + } + + if (status < 0) { +do_stall: + VDBG("req %02x.%02x protocol STALL; stat %d\n", + u.r.bRequestType, u.r.bRequest, status); + if (udc->ep0_set_config) { + if (udc->ep0_reset_config) + WARNING("error resetting config?\n"); + else + omap_writew(UDC_CLR_CFG, UDC_SYSCON2); + } + omap_writew(UDC_STALL_CMD, UDC_SYSCON2); + udc->ep0_pending = 0; + } + } +} + +/*-------------------------------------------------------------------------*/ + +#define OTG_FLAGS (UDC_B_HNP_ENABLE|UDC_A_HNP_SUPPORT|UDC_A_ALT_HNP_SUPPORT) + +static void devstate_irq(struct omap_udc *udc, u16 irq_src) +{ + u16 devstat, change; + + devstat = omap_readw(UDC_DEVSTAT); + change = devstat ^ udc->devstat; + udc->devstat = devstat; + + if (change & (UDC_USB_RESET|UDC_ATT)) { + udc_quiesce(udc); + + if (change & UDC_ATT) { + /* driver for any external transceiver will + * have called omap_vbus_session() already + */ + if (devstat & UDC_ATT) { + udc->gadget.speed = USB_SPEED_FULL; + VDBG("connect\n"); + if (IS_ERR_OR_NULL(udc->transceiver)) + pullup_enable(udc); + /* if (driver->connect) call it */ + } else if (udc->gadget.speed != USB_SPEED_UNKNOWN) { + udc->gadget.speed = USB_SPEED_UNKNOWN; + if (IS_ERR_OR_NULL(udc->transceiver)) + pullup_disable(udc); + DBG("disconnect, gadget %s\n", + udc->driver->driver.name); + if (udc->driver->disconnect) { + spin_unlock(&udc->lock); + udc->driver->disconnect(&udc->gadget); + spin_lock(&udc->lock); + } + } + change &= ~UDC_ATT; + } + + if (change & UDC_USB_RESET) { + if (devstat & UDC_USB_RESET) { + VDBG("RESET=1\n"); + } else { + udc->gadget.speed = USB_SPEED_FULL; + INFO("USB reset done, gadget %s\n", + udc->driver->driver.name); + /* ep0 traffic is legal from now on */ + omap_writew(UDC_DS_CHG_IE | UDC_EP0_IE, + UDC_IRQ_EN); + } + change &= ~UDC_USB_RESET; + } + } + if (change & UDC_SUS) { + if (udc->gadget.speed != USB_SPEED_UNKNOWN) { + /* FIXME tell isp1301 to suspend/resume (?) */ + if (devstat & UDC_SUS) { + VDBG("suspend\n"); + update_otg(udc); + /* HNP could be under way already */ + if (udc->gadget.speed == USB_SPEED_FULL + && udc->driver->suspend) { + spin_unlock(&udc->lock); + udc->driver->suspend(&udc->gadget); + spin_lock(&udc->lock); + } + if (!IS_ERR_OR_NULL(udc->transceiver)) + usb_phy_set_suspend( + udc->transceiver, 1); + } else { + VDBG("resume\n"); + if (!IS_ERR_OR_NULL(udc->transceiver)) + usb_phy_set_suspend( + udc->transceiver, 0); + if (udc->gadget.speed == USB_SPEED_FULL + && udc->driver->resume) { + spin_unlock(&udc->lock); + udc->driver->resume(&udc->gadget); + spin_lock(&udc->lock); + } + } + } + change &= ~UDC_SUS; + } + if (!cpu_is_omap15xx() && (change & OTG_FLAGS)) { + update_otg(udc); + change &= ~OTG_FLAGS; + } + + change &= ~(UDC_CFG|UDC_DEF|UDC_ADD); + if (change) + VDBG("devstat %03x, ignore change %03x\n", + devstat, change); + + omap_writew(UDC_DS_CHG, UDC_IRQ_SRC); +} + +static irqreturn_t omap_udc_irq(int irq, void *_udc) +{ + struct omap_udc *udc = _udc; + u16 irq_src; + irqreturn_t status = IRQ_NONE; + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + irq_src = omap_readw(UDC_IRQ_SRC); + + /* Device state change (usb ch9 stuff) */ + if (irq_src & UDC_DS_CHG) { + devstate_irq(_udc, irq_src); + status = IRQ_HANDLED; + irq_src &= ~UDC_DS_CHG; + } + + /* EP0 control transfers */ + if (irq_src & (UDC_EP0_RX|UDC_SETUP|UDC_EP0_TX)) { + ep0_irq(_udc, irq_src); + status = IRQ_HANDLED; + irq_src &= ~(UDC_EP0_RX|UDC_SETUP|UDC_EP0_TX); + } + + /* DMA transfer completion */ + if (use_dma && (irq_src & (UDC_TXN_DONE|UDC_RXN_CNT|UDC_RXN_EOT))) { + dma_irq(_udc, irq_src); + status = IRQ_HANDLED; + irq_src &= ~(UDC_TXN_DONE|UDC_RXN_CNT|UDC_RXN_EOT); + } + + irq_src &= ~(UDC_IRQ_SOF | UDC_EPN_TX|UDC_EPN_RX); + if (irq_src) + DBG("udc_irq, unhandled %03x\n", irq_src); + spin_unlock_irqrestore(&udc->lock, flags); + + return status; +} + +/* workaround for seemingly-lost IRQs for RX ACKs... */ +#define PIO_OUT_TIMEOUT (jiffies + HZ/3) +#define HALF_FULL(f) (!((f)&(UDC_NON_ISO_FIFO_FULL|UDC_NON_ISO_FIFO_EMPTY))) + +static void pio_out_timer(struct timer_list *t) +{ + struct omap_ep *ep = from_timer(ep, t, timer); + unsigned long flags; + u16 stat_flg; + + spin_lock_irqsave(&ep->udc->lock, flags); + if (!list_empty(&ep->queue) && ep->ackwait) { + use_ep(ep, UDC_EP_SEL); + stat_flg = omap_readw(UDC_STAT_FLG); + + if ((stat_flg & UDC_ACK) && (!(stat_flg & UDC_FIFO_EN) + || (ep->double_buf && HALF_FULL(stat_flg)))) { + struct omap_req *req; + + VDBG("%s: lose, %04x\n", ep->ep.name, stat_flg); + req = container_of(ep->queue.next, + struct omap_req, queue); + (void) read_fifo(ep, req); + omap_writew(ep->bEndpointAddress, UDC_EP_NUM); + omap_writew(UDC_SET_FIFO_EN, UDC_CTRL); + ep->ackwait = 1 + ep->double_buf; + } else + deselect_ep(); + } + mod_timer(&ep->timer, PIO_OUT_TIMEOUT); + spin_unlock_irqrestore(&ep->udc->lock, flags); +} + +static irqreturn_t omap_udc_pio_irq(int irq, void *_dev) +{ + u16 epn_stat, irq_src; + irqreturn_t status = IRQ_NONE; + struct omap_ep *ep; + int epnum; + struct omap_udc *udc = _dev; + struct omap_req *req; + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + epn_stat = omap_readw(UDC_EPN_STAT); + irq_src = omap_readw(UDC_IRQ_SRC); + + /* handle OUT first, to avoid some wasteful NAKs */ + if (irq_src & UDC_EPN_RX) { + epnum = (epn_stat >> 8) & 0x0f; + omap_writew(UDC_EPN_RX, UDC_IRQ_SRC); + status = IRQ_HANDLED; + ep = &udc->ep[epnum]; + ep->irqs++; + + omap_writew(epnum | UDC_EP_SEL, UDC_EP_NUM); + ep->fnf = 0; + if (omap_readw(UDC_STAT_FLG) & UDC_ACK) { + ep->ackwait--; + if (!list_empty(&ep->queue)) { + int stat; + req = container_of(ep->queue.next, + struct omap_req, queue); + stat = read_fifo(ep, req); + if (!ep->double_buf) + ep->fnf = 1; + } + } + /* min 6 clock delay before clearing EP_SEL ... */ + epn_stat = omap_readw(UDC_EPN_STAT); + epn_stat = omap_readw(UDC_EPN_STAT); + omap_writew(epnum, UDC_EP_NUM); + + /* enabling fifo _after_ clearing ACK, contrary to docs, + * reduces lossage; timer still needed though (sigh). + */ + if (ep->fnf) { + omap_writew(UDC_SET_FIFO_EN, UDC_CTRL); + ep->ackwait = 1 + ep->double_buf; + } + mod_timer(&ep->timer, PIO_OUT_TIMEOUT); + } + + /* then IN transfers */ + else if (irq_src & UDC_EPN_TX) { + epnum = epn_stat & 0x0f; + omap_writew(UDC_EPN_TX, UDC_IRQ_SRC); + status = IRQ_HANDLED; + ep = &udc->ep[16 + epnum]; + ep->irqs++; + + omap_writew(epnum | UDC_EP_DIR | UDC_EP_SEL, UDC_EP_NUM); + if (omap_readw(UDC_STAT_FLG) & UDC_ACK) { + ep->ackwait = 0; + if (!list_empty(&ep->queue)) { + req = container_of(ep->queue.next, + struct omap_req, queue); + (void) write_fifo(ep, req); + } + } + /* min 6 clock delay before clearing EP_SEL ... */ + epn_stat = omap_readw(UDC_EPN_STAT); + epn_stat = omap_readw(UDC_EPN_STAT); + omap_writew(epnum | UDC_EP_DIR, UDC_EP_NUM); + /* then 6 clocks before it'd tx */ + } + + spin_unlock_irqrestore(&udc->lock, flags); + return status; +} + +#ifdef USE_ISO +static irqreturn_t omap_udc_iso_irq(int irq, void *_dev) +{ + struct omap_udc *udc = _dev; + struct omap_ep *ep; + int pending = 0; + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + + /* handle all non-DMA ISO transfers */ + list_for_each_entry(ep, &udc->iso, iso) { + u16 stat; + struct omap_req *req; + + if (ep->has_dma || list_empty(&ep->queue)) + continue; + req = list_entry(ep->queue.next, struct omap_req, queue); + + use_ep(ep, UDC_EP_SEL); + stat = omap_readw(UDC_STAT_FLG); + + /* NOTE: like the other controller drivers, this isn't + * currently reporting lost or damaged frames. + */ + if (ep->bEndpointAddress & USB_DIR_IN) { + if (stat & UDC_MISS_IN) + /* done(ep, req, -EPROTO) */; + else + write_fifo(ep, req); + } else { + int status = 0; + + if (stat & UDC_NO_RXPACKET) + status = -EREMOTEIO; + else if (stat & UDC_ISO_ERR) + status = -EILSEQ; + else if (stat & UDC_DATA_FLUSH) + status = -ENOSR; + + if (status) + /* done(ep, req, status) */; + else + read_fifo(ep, req); + } + deselect_ep(); + /* 6 wait states before next EP */ + + ep->irqs++; + if (!list_empty(&ep->queue)) + pending = 1; + } + if (!pending) { + u16 w; + + w = omap_readw(UDC_IRQ_EN); + w &= ~UDC_SOF_IE; + omap_writew(w, UDC_IRQ_EN); + } + omap_writew(UDC_IRQ_SOF, UDC_IRQ_SRC); + + spin_unlock_irqrestore(&udc->lock, flags); + return IRQ_HANDLED; +} +#endif + +/*-------------------------------------------------------------------------*/ + +static inline int machine_without_vbus_sense(void) +{ + return machine_is_omap_innovator() + || machine_is_omap_osk() + || machine_is_omap_palmte() + || machine_is_sx1() + /* No known omap7xx boards with vbus sense */ + || cpu_is_omap7xx(); +} + +static int omap_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) +{ + int status; + struct omap_ep *ep; + unsigned long flags; + + + spin_lock_irqsave(&udc->lock, flags); + /* reset state */ + list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) { + ep->irqs = 0; + if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) + continue; + use_ep(ep, 0); + omap_writew(UDC_SET_HALT, UDC_CTRL); + } + udc->ep0_pending = 0; + udc->ep[0].irqs = 0; + udc->softconnect = 1; + + /* hook up the driver */ + udc->driver = driver; + spin_unlock_irqrestore(&udc->lock, flags); + + if (udc->dc_clk != NULL) + omap_udc_enable_clock(1); + + omap_writew(UDC_IRQ_SRC_MASK, UDC_IRQ_SRC); + + /* connect to bus through transceiver */ + if (!IS_ERR_OR_NULL(udc->transceiver)) { + status = otg_set_peripheral(udc->transceiver->otg, + &udc->gadget); + if (status < 0) { + ERR("can't bind to transceiver\n"); + udc->driver = NULL; + goto done; + } + } else { + status = 0; + if (can_pullup(udc)) + pullup_enable(udc); + else + pullup_disable(udc); + } + + /* boards that don't have VBUS sensing can't autogate 48MHz; + * can't enter deep sleep while a gadget driver is active. + */ + if (machine_without_vbus_sense()) + omap_vbus_session(&udc->gadget, 1); + +done: + if (udc->dc_clk != NULL) + omap_udc_enable_clock(0); + + return status; +} + +static int omap_udc_stop(struct usb_gadget *g) +{ + unsigned long flags; + + if (udc->dc_clk != NULL) + omap_udc_enable_clock(1); + + if (machine_without_vbus_sense()) + omap_vbus_session(&udc->gadget, 0); + + if (!IS_ERR_OR_NULL(udc->transceiver)) + (void) otg_set_peripheral(udc->transceiver->otg, NULL); + else + pullup_disable(udc); + + spin_lock_irqsave(&udc->lock, flags); + udc_quiesce(udc); + spin_unlock_irqrestore(&udc->lock, flags); + + udc->driver = NULL; + + if (udc->dc_clk != NULL) + omap_udc_enable_clock(0); + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + +#include <linux/seq_file.h> + +static const char proc_filename[] = "driver/udc"; + +#define FOURBITS "%s%s%s%s" +#define EIGHTBITS "%s%s%s%s%s%s%s%s" + +static void proc_ep_show(struct seq_file *s, struct omap_ep *ep) +{ + u16 stat_flg; + struct omap_req *req; + char buf[20]; + + use_ep(ep, 0); + + if (use_dma && ep->has_dma) + snprintf(buf, sizeof buf, "(%cxdma%d lch%d) ", + (ep->bEndpointAddress & USB_DIR_IN) ? 't' : 'r', + ep->dma_channel - 1, ep->lch); + else + buf[0] = 0; + + stat_flg = omap_readw(UDC_STAT_FLG); + seq_printf(s, + "\n%s %s%s%sirqs %ld stat %04x " EIGHTBITS FOURBITS "%s\n", + ep->name, buf, + ep->double_buf ? "dbuf " : "", + ({ char *s; + switch (ep->ackwait) { + case 0: + s = ""; + break; + case 1: + s = "(ackw) "; + break; + case 2: + s = "(ackw2) "; + break; + default: + s = "(?) "; + break; + } s; }), + ep->irqs, stat_flg, + (stat_flg & UDC_NO_RXPACKET) ? "no_rxpacket " : "", + (stat_flg & UDC_MISS_IN) ? "miss_in " : "", + (stat_flg & UDC_DATA_FLUSH) ? "data_flush " : "", + (stat_flg & UDC_ISO_ERR) ? "iso_err " : "", + (stat_flg & UDC_ISO_FIFO_EMPTY) ? "iso_fifo_empty " : "", + (stat_flg & UDC_ISO_FIFO_FULL) ? "iso_fifo_full " : "", + (stat_flg & UDC_EP_HALTED) ? "HALT " : "", + (stat_flg & UDC_STALL) ? "STALL " : "", + (stat_flg & UDC_NAK) ? "NAK " : "", + (stat_flg & UDC_ACK) ? "ACK " : "", + (stat_flg & UDC_FIFO_EN) ? "fifo_en " : "", + (stat_flg & UDC_NON_ISO_FIFO_EMPTY) ? "fifo_empty " : "", + (stat_flg & UDC_NON_ISO_FIFO_FULL) ? "fifo_full " : ""); + + if (list_empty(&ep->queue)) + seq_printf(s, "\t(queue empty)\n"); + else + list_for_each_entry(req, &ep->queue, queue) { + unsigned length = req->req.actual; + + if (use_dma && buf[0]) { + length += ((ep->bEndpointAddress & USB_DIR_IN) + ? dma_src_len : dma_dest_len) + (ep, req->req.dma + length); + buf[0] = 0; + } + seq_printf(s, "\treq %p len %d/%d buf %p\n", + &req->req, length, + req->req.length, req->req.buf); + } +} + +static char *trx_mode(unsigned m, int enabled) +{ + switch (m) { + case 0: + return enabled ? "*6wire" : "unused"; + case 1: + return "4wire"; + case 2: + return "3wire"; + case 3: + return "6wire"; + default: + return "unknown"; + } +} + +static int proc_otg_show(struct seq_file *s) +{ + u32 tmp; + u32 trans = 0; + char *ctrl_name = "(UNKNOWN)"; + + tmp = omap_readl(OTG_REV); + ctrl_name = "transceiver_ctrl"; + trans = omap_readw(USB_TRANSCEIVER_CTRL); + seq_printf(s, "\nOTG rev %d.%d, %s %05x\n", + tmp >> 4, tmp & 0xf, ctrl_name, trans); + tmp = omap_readw(OTG_SYSCON_1); + seq_printf(s, "otg_syscon1 %08x usb2 %s, usb1 %s, usb0 %s," + FOURBITS "\n", tmp, + trx_mode(USB2_TRX_MODE(tmp), trans & CONF_USB2_UNI_R), + trx_mode(USB1_TRX_MODE(tmp), trans & CONF_USB1_UNI_R), + (USB0_TRX_MODE(tmp) == 0 && !cpu_is_omap1710()) + ? "internal" + : trx_mode(USB0_TRX_MODE(tmp), 1), + (tmp & OTG_IDLE_EN) ? " !otg" : "", + (tmp & HST_IDLE_EN) ? " !host" : "", + (tmp & DEV_IDLE_EN) ? " !dev" : "", + (tmp & OTG_RESET_DONE) ? " reset_done" : " reset_active"); + tmp = omap_readl(OTG_SYSCON_2); + seq_printf(s, "otg_syscon2 %08x%s" EIGHTBITS + " b_ase_brst=%d hmc=%d\n", tmp, + (tmp & OTG_EN) ? " otg_en" : "", + (tmp & USBX_SYNCHRO) ? " synchro" : "", + /* much more SRP stuff */ + (tmp & SRP_DATA) ? " srp_data" : "", + (tmp & SRP_VBUS) ? " srp_vbus" : "", + (tmp & OTG_PADEN) ? " otg_paden" : "", + (tmp & HMC_PADEN) ? " hmc_paden" : "", + (tmp & UHOST_EN) ? " uhost_en" : "", + (tmp & HMC_TLLSPEED) ? " tllspeed" : "", + (tmp & HMC_TLLATTACH) ? " tllattach" : "", + B_ASE_BRST(tmp), + OTG_HMC(tmp)); + tmp = omap_readl(OTG_CTRL); + seq_printf(s, "otg_ctrl %06x" EIGHTBITS EIGHTBITS "%s\n", tmp, + (tmp & OTG_ASESSVLD) ? " asess" : "", + (tmp & OTG_BSESSEND) ? " bsess_end" : "", + (tmp & OTG_BSESSVLD) ? " bsess" : "", + (tmp & OTG_VBUSVLD) ? " vbus" : "", + (tmp & OTG_ID) ? " id" : "", + (tmp & OTG_DRIVER_SEL) ? " DEVICE" : " HOST", + (tmp & OTG_A_SETB_HNPEN) ? " a_setb_hnpen" : "", + (tmp & OTG_A_BUSREQ) ? " a_bus" : "", + (tmp & OTG_B_HNPEN) ? " b_hnpen" : "", + (tmp & OTG_B_BUSREQ) ? " b_bus" : "", + (tmp & OTG_BUSDROP) ? " busdrop" : "", + (tmp & OTG_PULLDOWN) ? " down" : "", + (tmp & OTG_PULLUP) ? " up" : "", + (tmp & OTG_DRV_VBUS) ? " drv" : "", + (tmp & OTG_PD_VBUS) ? " pd_vb" : "", + (tmp & OTG_PU_VBUS) ? " pu_vb" : "", + (tmp & OTG_PU_ID) ? " pu_id" : "" + ); + tmp = omap_readw(OTG_IRQ_EN); + seq_printf(s, "otg_irq_en %04x" "\n", tmp); + tmp = omap_readw(OTG_IRQ_SRC); + seq_printf(s, "otg_irq_src %04x" "\n", tmp); + tmp = omap_readw(OTG_OUTCTRL); + seq_printf(s, "otg_outctrl %04x" "\n", tmp); + tmp = omap_readw(OTG_TEST); + seq_printf(s, "otg_test %04x" "\n", tmp); + return 0; +} + +static int proc_udc_show(struct seq_file *s, void *_) +{ + u32 tmp; + struct omap_ep *ep; + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + + seq_printf(s, "%s, version: " DRIVER_VERSION +#ifdef USE_ISO + " (iso)" +#endif + "%s\n", + driver_desc, + use_dma ? " (dma)" : ""); + + tmp = omap_readw(UDC_REV) & 0xff; + seq_printf(s, + "UDC rev %d.%d, fifo mode %d, gadget %s\n" + "hmc %d, transceiver %s\n", + tmp >> 4, tmp & 0xf, + fifo_mode, + udc->driver ? udc->driver->driver.name : "(none)", + HMC, + udc->transceiver + ? udc->transceiver->label + : (cpu_is_omap1710() + ? "external" : "(none)")); + seq_printf(s, "ULPD control %04x req %04x status %04x\n", + omap_readw(ULPD_CLOCK_CTRL), + omap_readw(ULPD_SOFT_REQ), + omap_readw(ULPD_STATUS_REQ)); + + /* OTG controller registers */ + if (!cpu_is_omap15xx()) + proc_otg_show(s); + + tmp = omap_readw(UDC_SYSCON1); + seq_printf(s, "\nsyscon1 %04x" EIGHTBITS "\n", tmp, + (tmp & UDC_CFG_LOCK) ? " cfg_lock" : "", + (tmp & UDC_DATA_ENDIAN) ? " data_endian" : "", + (tmp & UDC_DMA_ENDIAN) ? " dma_endian" : "", + (tmp & UDC_NAK_EN) ? " nak" : "", + (tmp & UDC_AUTODECODE_DIS) ? " autodecode_dis" : "", + (tmp & UDC_SELF_PWR) ? " self_pwr" : "", + (tmp & UDC_SOFF_DIS) ? " soff_dis" : "", + (tmp & UDC_PULLUP_EN) ? " PULLUP" : ""); + /* syscon2 is write-only */ + + /* UDC controller registers */ + if (!(tmp & UDC_PULLUP_EN)) { + seq_printf(s, "(suspended)\n"); + spin_unlock_irqrestore(&udc->lock, flags); + return 0; + } + + tmp = omap_readw(UDC_DEVSTAT); + seq_printf(s, "devstat %04x" EIGHTBITS "%s%s\n", tmp, + (tmp & UDC_B_HNP_ENABLE) ? " b_hnp" : "", + (tmp & UDC_A_HNP_SUPPORT) ? " a_hnp" : "", + (tmp & UDC_A_ALT_HNP_SUPPORT) ? " a_alt_hnp" : "", + (tmp & UDC_R_WK_OK) ? " r_wk_ok" : "", + (tmp & UDC_USB_RESET) ? " usb_reset" : "", + (tmp & UDC_SUS) ? " SUS" : "", + (tmp & UDC_CFG) ? " CFG" : "", + (tmp & UDC_ADD) ? " ADD" : "", + (tmp & UDC_DEF) ? " DEF" : "", + (tmp & UDC_ATT) ? " ATT" : ""); + seq_printf(s, "sof %04x\n", omap_readw(UDC_SOF)); + tmp = omap_readw(UDC_IRQ_EN); + seq_printf(s, "irq_en %04x" FOURBITS "%s\n", tmp, + (tmp & UDC_SOF_IE) ? " sof" : "", + (tmp & UDC_EPN_RX_IE) ? " epn_rx" : "", + (tmp & UDC_EPN_TX_IE) ? " epn_tx" : "", + (tmp & UDC_DS_CHG_IE) ? " ds_chg" : "", + (tmp & UDC_EP0_IE) ? " ep0" : ""); + tmp = omap_readw(UDC_IRQ_SRC); + seq_printf(s, "irq_src %04x" EIGHTBITS "%s%s\n", tmp, + (tmp & UDC_TXN_DONE) ? " txn_done" : "", + (tmp & UDC_RXN_CNT) ? " rxn_cnt" : "", + (tmp & UDC_RXN_EOT) ? " rxn_eot" : "", + (tmp & UDC_IRQ_SOF) ? " sof" : "", + (tmp & UDC_EPN_RX) ? " epn_rx" : "", + (tmp & UDC_EPN_TX) ? " epn_tx" : "", + (tmp & UDC_DS_CHG) ? " ds_chg" : "", + (tmp & UDC_SETUP) ? " setup" : "", + (tmp & UDC_EP0_RX) ? " ep0out" : "", + (tmp & UDC_EP0_TX) ? " ep0in" : ""); + if (use_dma) { + unsigned i; + + tmp = omap_readw(UDC_DMA_IRQ_EN); + seq_printf(s, "dma_irq_en %04x%s" EIGHTBITS "\n", tmp, + (tmp & UDC_TX_DONE_IE(3)) ? " tx2_done" : "", + (tmp & UDC_RX_CNT_IE(3)) ? " rx2_cnt" : "", + (tmp & UDC_RX_EOT_IE(3)) ? " rx2_eot" : "", + + (tmp & UDC_TX_DONE_IE(2)) ? " tx1_done" : "", + (tmp & UDC_RX_CNT_IE(2)) ? " rx1_cnt" : "", + (tmp & UDC_RX_EOT_IE(2)) ? " rx1_eot" : "", + + (tmp & UDC_TX_DONE_IE(1)) ? " tx0_done" : "", + (tmp & UDC_RX_CNT_IE(1)) ? " rx0_cnt" : "", + (tmp & UDC_RX_EOT_IE(1)) ? " rx0_eot" : ""); + + tmp = omap_readw(UDC_RXDMA_CFG); + seq_printf(s, "rxdma_cfg %04x\n", tmp); + if (tmp) { + for (i = 0; i < 3; i++) { + if ((tmp & (0x0f << (i * 4))) == 0) + continue; + seq_printf(s, "rxdma[%d] %04x\n", i, + omap_readw(UDC_RXDMA(i + 1))); + } + } + tmp = omap_readw(UDC_TXDMA_CFG); + seq_printf(s, "txdma_cfg %04x\n", tmp); + if (tmp) { + for (i = 0; i < 3; i++) { + if (!(tmp & (0x0f << (i * 4)))) + continue; + seq_printf(s, "txdma[%d] %04x\n", i, + omap_readw(UDC_TXDMA(i + 1))); + } + } + } + + tmp = omap_readw(UDC_DEVSTAT); + if (tmp & UDC_ATT) { + proc_ep_show(s, &udc->ep[0]); + if (tmp & UDC_ADD) { + list_for_each_entry(ep, &udc->gadget.ep_list, + ep.ep_list) { + if (ep->ep.desc) + proc_ep_show(s, ep); + } + } + } + spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} + +static void create_proc_file(void) +{ + proc_create_single(proc_filename, 0, NULL, proc_udc_show); +} + +static void remove_proc_file(void) +{ + remove_proc_entry(proc_filename, NULL); +} + +#else + +static inline void create_proc_file(void) {} +static inline void remove_proc_file(void) {} + +#endif + +/*-------------------------------------------------------------------------*/ + +/* Before this controller can enumerate, we need to pick an endpoint + * configuration, or "fifo_mode" That involves allocating 2KB of packet + * buffer space among the endpoints we'll be operating. + * + * NOTE: as of OMAP 1710 ES2.0, writing a new endpoint config when + * UDC_SYSCON_1.CFG_LOCK is set can now work. We won't use that + * capability yet though. + */ +static unsigned +omap_ep_setup(char *name, u8 addr, u8 type, + unsigned buf, unsigned maxp, int dbuf) +{ + struct omap_ep *ep; + u16 epn_rxtx = 0; + + /* OUT endpoints first, then IN */ + ep = &udc->ep[addr & 0xf]; + if (addr & USB_DIR_IN) + ep += 16; + + /* in case of ep init table bugs */ + BUG_ON(ep->name[0]); + + /* chip setup ... bit values are same for IN, OUT */ + if (type == USB_ENDPOINT_XFER_ISOC) { + switch (maxp) { + case 8: + epn_rxtx = 0 << 12; + break; + case 16: + epn_rxtx = 1 << 12; + break; + case 32: + epn_rxtx = 2 << 12; + break; + case 64: + epn_rxtx = 3 << 12; + break; + case 128: + epn_rxtx = 4 << 12; + break; + case 256: + epn_rxtx = 5 << 12; + break; + case 512: + epn_rxtx = 6 << 12; + break; + default: + BUG(); + } + epn_rxtx |= UDC_EPN_RX_ISO; + dbuf = 1; + } else { + /* double-buffering "not supported" on 15xx, + * and ignored for PIO-IN on newer chips + * (for more reliable behavior) + */ + if (!use_dma || cpu_is_omap15xx()) + dbuf = 0; + + switch (maxp) { + case 8: + epn_rxtx = 0 << 12; + break; + case 16: + epn_rxtx = 1 << 12; + break; + case 32: + epn_rxtx = 2 << 12; + break; + case 64: + epn_rxtx = 3 << 12; + break; + default: + BUG(); + } + if (dbuf && addr) + epn_rxtx |= UDC_EPN_RX_DB; + timer_setup(&ep->timer, pio_out_timer, 0); + } + if (addr) + epn_rxtx |= UDC_EPN_RX_VALID; + BUG_ON(buf & 0x07); + epn_rxtx |= buf >> 3; + + DBG("%s addr %02x rxtx %04x maxp %d%s buf %d\n", + name, addr, epn_rxtx, maxp, dbuf ? "x2" : "", buf); + + if (addr & USB_DIR_IN) + omap_writew(epn_rxtx, UDC_EP_TX(addr & 0xf)); + else + omap_writew(epn_rxtx, UDC_EP_RX(addr)); + + /* next endpoint's buffer starts after this one's */ + buf += maxp; + if (dbuf) + buf += maxp; + BUG_ON(buf > 2048); + + /* set up driver data structures */ + BUG_ON(strlen(name) >= sizeof ep->name); + strscpy(ep->name, name, sizeof(ep->name)); + INIT_LIST_HEAD(&ep->queue); + INIT_LIST_HEAD(&ep->iso); + ep->bEndpointAddress = addr; + ep->bmAttributes = type; + ep->double_buf = dbuf; + ep->udc = udc; + + switch (type) { + case USB_ENDPOINT_XFER_CONTROL: + ep->ep.caps.type_control = true; + ep->ep.caps.dir_in = true; + ep->ep.caps.dir_out = true; + break; + case USB_ENDPOINT_XFER_ISOC: + ep->ep.caps.type_iso = true; + break; + case USB_ENDPOINT_XFER_BULK: + ep->ep.caps.type_bulk = true; + break; + case USB_ENDPOINT_XFER_INT: + ep->ep.caps.type_int = true; + break; + } + + if (addr & USB_DIR_IN) + ep->ep.caps.dir_in = true; + else + ep->ep.caps.dir_out = true; + + ep->ep.name = ep->name; + ep->ep.ops = &omap_ep_ops; + ep->maxpacket = maxp; + usb_ep_set_maxpacket_limit(&ep->ep, ep->maxpacket); + list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); + + return buf; +} + +static void omap_udc_release(struct device *dev) +{ + pullup_disable(udc); + if (!IS_ERR_OR_NULL(udc->transceiver)) { + usb_put_phy(udc->transceiver); + udc->transceiver = NULL; + } + omap_writew(0, UDC_SYSCON1); + remove_proc_file(); + if (udc->dc_clk) { + if (udc->clk_requested) + omap_udc_enable_clock(0); + clk_unprepare(udc->hhc_clk); + clk_unprepare(udc->dc_clk); + clk_put(udc->hhc_clk); + clk_put(udc->dc_clk); + } + if (udc->done) + complete(udc->done); + kfree(udc); +} + +static int +omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv) +{ + unsigned tmp, buf; + + /* abolish any previous hardware state */ + omap_writew(0, UDC_SYSCON1); + omap_writew(0, UDC_IRQ_EN); + omap_writew(UDC_IRQ_SRC_MASK, UDC_IRQ_SRC); + omap_writew(0, UDC_DMA_IRQ_EN); + omap_writew(0, UDC_RXDMA_CFG); + omap_writew(0, UDC_TXDMA_CFG); + + /* UDC_PULLUP_EN gates the chip clock */ + /* OTG_SYSCON_1 |= DEV_IDLE_EN; */ + + udc = kzalloc(sizeof(*udc), GFP_KERNEL); + if (!udc) + return -ENOMEM; + + spin_lock_init(&udc->lock); + + udc->gadget.ops = &omap_gadget_ops; + udc->gadget.ep0 = &udc->ep[0].ep; + INIT_LIST_HEAD(&udc->gadget.ep_list); + INIT_LIST_HEAD(&udc->iso); + udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->gadget.max_speed = USB_SPEED_FULL; + udc->gadget.name = driver_name; + udc->gadget.quirk_ep_out_aligned_size = 1; + udc->transceiver = xceiv; + + /* ep0 is special; put it right after the SETUP buffer */ + buf = omap_ep_setup("ep0", 0, USB_ENDPOINT_XFER_CONTROL, + 8 /* after SETUP */, 64 /* maxpacket */, 0); + list_del_init(&udc->ep[0].ep.ep_list); + + /* initially disable all non-ep0 endpoints */ + for (tmp = 1; tmp < 15; tmp++) { + omap_writew(0, UDC_EP_RX(tmp)); + omap_writew(0, UDC_EP_TX(tmp)); + } + +#define OMAP_BULK_EP(name, addr) \ + buf = omap_ep_setup(name "-bulk", addr, \ + USB_ENDPOINT_XFER_BULK, buf, 64, 1); +#define OMAP_INT_EP(name, addr, maxp) \ + buf = omap_ep_setup(name "-int", addr, \ + USB_ENDPOINT_XFER_INT, buf, maxp, 0); +#define OMAP_ISO_EP(name, addr, maxp) \ + buf = omap_ep_setup(name "-iso", addr, \ + USB_ENDPOINT_XFER_ISOC, buf, maxp, 1); + + switch (fifo_mode) { + case 0: + OMAP_BULK_EP("ep1in", USB_DIR_IN | 1); + OMAP_BULK_EP("ep2out", USB_DIR_OUT | 2); + OMAP_INT_EP("ep3in", USB_DIR_IN | 3, 16); + break; + case 1: + OMAP_BULK_EP("ep1in", USB_DIR_IN | 1); + OMAP_BULK_EP("ep2out", USB_DIR_OUT | 2); + OMAP_INT_EP("ep9in", USB_DIR_IN | 9, 16); + + OMAP_BULK_EP("ep3in", USB_DIR_IN | 3); + OMAP_BULK_EP("ep4out", USB_DIR_OUT | 4); + OMAP_INT_EP("ep10in", USB_DIR_IN | 10, 16); + + OMAP_BULK_EP("ep5in", USB_DIR_IN | 5); + OMAP_BULK_EP("ep5out", USB_DIR_OUT | 5); + OMAP_INT_EP("ep11in", USB_DIR_IN | 11, 16); + + OMAP_BULK_EP("ep6in", USB_DIR_IN | 6); + OMAP_BULK_EP("ep6out", USB_DIR_OUT | 6); + OMAP_INT_EP("ep12in", USB_DIR_IN | 12, 16); + + OMAP_BULK_EP("ep7in", USB_DIR_IN | 7); + OMAP_BULK_EP("ep7out", USB_DIR_OUT | 7); + OMAP_INT_EP("ep13in", USB_DIR_IN | 13, 16); + OMAP_INT_EP("ep13out", USB_DIR_OUT | 13, 16); + + OMAP_BULK_EP("ep8in", USB_DIR_IN | 8); + OMAP_BULK_EP("ep8out", USB_DIR_OUT | 8); + OMAP_INT_EP("ep14in", USB_DIR_IN | 14, 16); + OMAP_INT_EP("ep14out", USB_DIR_OUT | 14, 16); + + OMAP_BULK_EP("ep15in", USB_DIR_IN | 15); + OMAP_BULK_EP("ep15out", USB_DIR_OUT | 15); + + break; + +#ifdef USE_ISO + case 2: /* mixed iso/bulk */ + OMAP_ISO_EP("ep1in", USB_DIR_IN | 1, 256); + OMAP_ISO_EP("ep2out", USB_DIR_OUT | 2, 256); + OMAP_ISO_EP("ep3in", USB_DIR_IN | 3, 128); + OMAP_ISO_EP("ep4out", USB_DIR_OUT | 4, 128); + + OMAP_INT_EP("ep5in", USB_DIR_IN | 5, 16); + + OMAP_BULK_EP("ep6in", USB_DIR_IN | 6); + OMAP_BULK_EP("ep7out", USB_DIR_OUT | 7); + OMAP_INT_EP("ep8in", USB_DIR_IN | 8, 16); + break; + case 3: /* mixed bulk/iso */ + OMAP_BULK_EP("ep1in", USB_DIR_IN | 1); + OMAP_BULK_EP("ep2out", USB_DIR_OUT | 2); + OMAP_INT_EP("ep3in", USB_DIR_IN | 3, 16); + + OMAP_BULK_EP("ep4in", USB_DIR_IN | 4); + OMAP_BULK_EP("ep5out", USB_DIR_OUT | 5); + OMAP_INT_EP("ep6in", USB_DIR_IN | 6, 16); + + OMAP_ISO_EP("ep7in", USB_DIR_IN | 7, 256); + OMAP_ISO_EP("ep8out", USB_DIR_OUT | 8, 256); + OMAP_INT_EP("ep9in", USB_DIR_IN | 9, 16); + break; +#endif + + /* add more modes as needed */ + + default: + ERR("unsupported fifo_mode #%d\n", fifo_mode); + return -ENODEV; + } + omap_writew(UDC_CFG_LOCK|UDC_SELF_PWR, UDC_SYSCON1); + INFO("fifo mode %d, %d bytes not used\n", fifo_mode, 2048 - buf); + return 0; +} + +static int omap_udc_probe(struct platform_device *pdev) +{ + int status = -ENODEV; + int hmc; + struct usb_phy *xceiv = NULL; + const char *type = NULL; + struct omap_usb_config *config = dev_get_platdata(&pdev->dev); + struct clk *dc_clk = NULL; + struct clk *hhc_clk = NULL; + + if (cpu_is_omap7xx()) + use_dma = 0; + + /* NOTE: "knows" the order of the resources! */ + if (!request_mem_region(pdev->resource[0].start, + resource_size(&pdev->resource[0]), + driver_name)) { + DBG("request_mem_region failed\n"); + return -EBUSY; + } + + if (cpu_is_omap16xx()) { + dc_clk = clk_get(&pdev->dev, "usb_dc_ck"); + hhc_clk = clk_get(&pdev->dev, "usb_hhc_ck"); + BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk)); + /* can't use omap_udc_enable_clock yet */ + clk_prepare_enable(dc_clk); + clk_prepare_enable(hhc_clk); + udelay(100); + } + + if (cpu_is_omap7xx()) { + dc_clk = clk_get(&pdev->dev, "usb_dc_ck"); + hhc_clk = clk_get(&pdev->dev, "l3_ocpi_ck"); + BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk)); + /* can't use omap_udc_enable_clock yet */ + clk_prepare_enable(dc_clk); + clk_prepare_enable(hhc_clk); + udelay(100); + } + + INFO("OMAP UDC rev %d.%d%s\n", + omap_readw(UDC_REV) >> 4, omap_readw(UDC_REV) & 0xf, + config->otg ? ", Mini-AB" : ""); + + /* use the mode given to us by board init code */ + if (cpu_is_omap15xx()) { + hmc = HMC_1510; + type = "(unknown)"; + + if (machine_without_vbus_sense()) { + /* just set up software VBUS detect, and then + * later rig it so we always report VBUS. + * FIXME without really sensing VBUS, we can't + * know when to turn PULLUP_EN on/off; and that + * means we always "need" the 48MHz clock. + */ + u32 tmp = omap_readl(FUNC_MUX_CTRL_0); + tmp &= ~VBUS_CTRL_1510; + omap_writel(tmp, FUNC_MUX_CTRL_0); + tmp |= VBUS_MODE_1510; + tmp &= ~VBUS_CTRL_1510; + omap_writel(tmp, FUNC_MUX_CTRL_0); + } + } else { + /* The transceiver may package some GPIO logic or handle + * loopback and/or transceiverless setup; if we find one, + * use it. Except for OTG, we don't _need_ to talk to one; + * but not having one probably means no VBUS detection. + */ + xceiv = usb_get_phy(USB_PHY_TYPE_USB2); + if (!IS_ERR_OR_NULL(xceiv)) + type = xceiv->label; + else if (config->otg) { + DBG("OTG requires external transceiver!\n"); + goto cleanup0; + } + + hmc = HMC_1610; + + switch (hmc) { + case 0: /* POWERUP DEFAULT == 0 */ + case 4: + case 12: + case 20: + if (!cpu_is_omap1710()) { + type = "integrated"; + break; + } + fallthrough; + case 3: + case 11: + case 16: + case 19: + case 25: + if (IS_ERR_OR_NULL(xceiv)) { + DBG("external transceiver not registered!\n"); + type = "unknown"; + } + break; + case 21: /* internal loopback */ + type = "loopback"; + break; + case 14: /* transceiverless */ + if (cpu_is_omap1710()) + goto bad_on_1710; + fallthrough; + case 13: + case 15: + type = "no"; + break; + + default: +bad_on_1710: + ERR("unrecognized UDC HMC mode %d\n", hmc); + goto cleanup0; + } + } + + INFO("hmc mode %d, %s transceiver\n", hmc, type); + + /* a "gadget" abstracts/virtualizes the controller */ + status = omap_udc_setup(pdev, xceiv); + if (status) + goto cleanup0; + + xceiv = NULL; + /* "udc" is now valid */ + pullup_disable(udc); +#if IS_ENABLED(CONFIG_USB_OHCI_HCD) + udc->gadget.is_otg = (config->otg != 0); +#endif + + /* starting with omap1710 es2.0, clear toggle is a separate bit */ + if (omap_readw(UDC_REV) >= 0x61) + udc->clr_halt = UDC_RESET_EP | UDC_CLRDATA_TOGGLE; + else + udc->clr_halt = UDC_RESET_EP; + + /* USB general purpose IRQ: ep0, state changes, dma, etc */ + status = devm_request_irq(&pdev->dev, pdev->resource[1].start, + omap_udc_irq, 0, driver_name, udc); + if (status != 0) { + ERR("can't get irq %d, err %d\n", + (int) pdev->resource[1].start, status); + goto cleanup1; + } + + /* USB "non-iso" IRQ (PIO for all but ep0) */ + status = devm_request_irq(&pdev->dev, pdev->resource[2].start, + omap_udc_pio_irq, 0, "omap_udc pio", udc); + if (status != 0) { + ERR("can't get irq %d, err %d\n", + (int) pdev->resource[2].start, status); + goto cleanup1; + } +#ifdef USE_ISO + status = devm_request_irq(&pdev->dev, pdev->resource[3].start, + omap_udc_iso_irq, 0, "omap_udc iso", udc); + if (status != 0) { + ERR("can't get irq %d, err %d\n", + (int) pdev->resource[3].start, status); + goto cleanup1; + } +#endif + if (cpu_is_omap16xx() || cpu_is_omap7xx()) { + udc->dc_clk = dc_clk; + udc->hhc_clk = hhc_clk; + clk_disable(hhc_clk); + clk_disable(dc_clk); + } + + create_proc_file(); + return usb_add_gadget_udc_release(&pdev->dev, &udc->gadget, + omap_udc_release); + +cleanup1: + kfree(udc); + udc = NULL; + +cleanup0: + if (!IS_ERR_OR_NULL(xceiv)) + usb_put_phy(xceiv); + + if (cpu_is_omap16xx() || cpu_is_omap7xx()) { + clk_disable_unprepare(hhc_clk); + clk_disable_unprepare(dc_clk); + clk_put(hhc_clk); + clk_put(dc_clk); + } + + release_mem_region(pdev->resource[0].start, + resource_size(&pdev->resource[0])); + + return status; +} + +static int omap_udc_remove(struct platform_device *pdev) +{ + DECLARE_COMPLETION_ONSTACK(done); + + udc->done = &done; + + usb_del_gadget_udc(&udc->gadget); + + wait_for_completion(&done); + + release_mem_region(pdev->resource[0].start, + resource_size(&pdev->resource[0])); + + return 0; +} + +/* suspend/resume/wakeup from sysfs (echo > power/state) or when the + * system is forced into deep sleep + * + * REVISIT we should probably reject suspend requests when there's a host + * session active, rather than disconnecting, at least on boards that can + * report VBUS irqs (UDC_DEVSTAT.UDC_ATT). And in any case, we need to + * make host resumes and VBUS detection trigger OMAP wakeup events; that + * may involve talking to an external transceiver (e.g. isp1301). + */ + +static int omap_udc_suspend(struct platform_device *dev, pm_message_t message) +{ + u32 devstat; + + devstat = omap_readw(UDC_DEVSTAT); + + /* we're requesting 48 MHz clock if the pullup is enabled + * (== we're attached to the host) and we're not suspended, + * which would prevent entry to deep sleep... + */ + if ((devstat & UDC_ATT) != 0 && (devstat & UDC_SUS) == 0) { + WARNING("session active; suspend requires disconnect\n"); + omap_pullup(&udc->gadget, 0); + } + + return 0; +} + +static int omap_udc_resume(struct platform_device *dev) +{ + DBG("resume + wakeup/SRP\n"); + omap_pullup(&udc->gadget, 1); + + /* maybe the host would enumerate us if we nudged it */ + msleep(100); + return omap_wakeup(&udc->gadget); +} + +/*-------------------------------------------------------------------------*/ + +static struct platform_driver udc_driver = { + .probe = omap_udc_probe, + .remove = omap_udc_remove, + .suspend = omap_udc_suspend, + .resume = omap_udc_resume, + .driver = { + .name = driver_name, + }, +}; + +module_platform_driver(udc_driver); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:omap_udc"); diff --git a/drivers/usb/gadget/udc/omap_udc.h b/drivers/usb/gadget/udc/omap_udc.h new file mode 100644 index 000000000..00f9e608e --- /dev/null +++ b/drivers/usb/gadget/udc/omap_udc.h @@ -0,0 +1,207 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * omap_udc.h -- for omap 3.2 udc, with OTG support + * + * 2004 (C) Texas Instruments, Inc. + * 2004 (C) David Brownell + */ + +/* + * USB device/endpoint management registers + */ + +#define UDC_REV (UDC_BASE + 0x0) /* Revision */ +#define UDC_EP_NUM (UDC_BASE + 0x4) /* Which endpoint */ +# define UDC_SETUP_SEL (1 << 6) +# define UDC_EP_SEL (1 << 5) +# define UDC_EP_DIR (1 << 4) + /* low 4 bits for endpoint number */ +#define UDC_DATA (UDC_BASE + 0x08) /* Endpoint FIFO */ +#define UDC_CTRL (UDC_BASE + 0x0C) /* Endpoint control */ +# define UDC_CLR_HALT (1 << 7) +# define UDC_SET_HALT (1 << 6) +# define UDC_CLRDATA_TOGGLE (1 << 3) +# define UDC_SET_FIFO_EN (1 << 2) +# define UDC_CLR_EP (1 << 1) +# define UDC_RESET_EP (1 << 0) +#define UDC_STAT_FLG (UDC_BASE + 0x10) /* Endpoint status */ +# define UDC_NO_RXPACKET (1 << 15) +# define UDC_MISS_IN (1 << 14) +# define UDC_DATA_FLUSH (1 << 13) +# define UDC_ISO_ERR (1 << 12) +# define UDC_ISO_FIFO_EMPTY (1 << 9) +# define UDC_ISO_FIFO_FULL (1 << 8) +# define UDC_EP_HALTED (1 << 6) +# define UDC_STALL (1 << 5) +# define UDC_NAK (1 << 4) +# define UDC_ACK (1 << 3) +# define UDC_FIFO_EN (1 << 2) +# define UDC_NON_ISO_FIFO_EMPTY (1 << 1) +# define UDC_NON_ISO_FIFO_FULL (1 << 0) +#define UDC_RXFSTAT (UDC_BASE + 0x14) /* OUT bytecount */ +#define UDC_SYSCON1 (UDC_BASE + 0x18) /* System config 1 */ +# define UDC_CFG_LOCK (1 << 8) +# define UDC_DATA_ENDIAN (1 << 7) +# define UDC_DMA_ENDIAN (1 << 6) +# define UDC_NAK_EN (1 << 4) +# define UDC_AUTODECODE_DIS (1 << 3) +# define UDC_SELF_PWR (1 << 2) +# define UDC_SOFF_DIS (1 << 1) +# define UDC_PULLUP_EN (1 << 0) +#define UDC_SYSCON2 (UDC_BASE + 0x1C) /* System config 2 */ +# define UDC_RMT_WKP (1 << 6) +# define UDC_STALL_CMD (1 << 5) +# define UDC_DEV_CFG (1 << 3) +# define UDC_CLR_CFG (1 << 2) +#define UDC_DEVSTAT (UDC_BASE + 0x20) /* Device status */ +# define UDC_B_HNP_ENABLE (1 << 9) +# define UDC_A_HNP_SUPPORT (1 << 8) +# define UDC_A_ALT_HNP_SUPPORT (1 << 7) +# define UDC_R_WK_OK (1 << 6) +# define UDC_USB_RESET (1 << 5) +# define UDC_SUS (1 << 4) +# define UDC_CFG (1 << 3) +# define UDC_ADD (1 << 2) +# define UDC_DEF (1 << 1) +# define UDC_ATT (1 << 0) +#define UDC_SOF (UDC_BASE + 0x24) /* Start of frame */ +# define UDC_FT_LOCK (1 << 12) +# define UDC_TS_OK (1 << 11) +# define UDC_TS 0x03ff +#define UDC_IRQ_EN (UDC_BASE + 0x28) /* Interrupt enable */ +# define UDC_SOF_IE (1 << 7) +# define UDC_EPN_RX_IE (1 << 5) +# define UDC_EPN_TX_IE (1 << 4) +# define UDC_DS_CHG_IE (1 << 3) +# define UDC_EP0_IE (1 << 0) +#define UDC_DMA_IRQ_EN (UDC_BASE + 0x2C) /* DMA irq enable */ + /* rx/tx dma channels numbered 1-3 not 0-2 */ +# define UDC_TX_DONE_IE(n) (1 << (4 * (n) - 2)) +# define UDC_RX_CNT_IE(n) (1 << (4 * (n) - 3)) +# define UDC_RX_EOT_IE(n) (1 << (4 * (n) - 4)) +#define UDC_IRQ_SRC (UDC_BASE + 0x30) /* Interrupt source */ +# define UDC_TXN_DONE (1 << 10) +# define UDC_RXN_CNT (1 << 9) +# define UDC_RXN_EOT (1 << 8) +# define UDC_IRQ_SOF (1 << 7) +# define UDC_EPN_RX (1 << 5) +# define UDC_EPN_TX (1 << 4) +# define UDC_DS_CHG (1 << 3) +# define UDC_SETUP (1 << 2) +# define UDC_EP0_RX (1 << 1) +# define UDC_EP0_TX (1 << 0) +# define UDC_IRQ_SRC_MASK 0x7bf +#define UDC_EPN_STAT (UDC_BASE + 0x34) /* EP irq status */ +#define UDC_DMAN_STAT (UDC_BASE + 0x38) /* DMA irq status */ +# define UDC_DMA_RX_SB (1 << 12) +# define UDC_DMA_RX_SRC(x) (((x)>>8) & 0xf) +# define UDC_DMA_TX_SRC(x) (((x)>>0) & 0xf) + + +/* DMA configuration registers: up to three channels in each direction. */ +#define UDC_RXDMA_CFG (UDC_BASE + 0x40) /* 3 eps for RX DMA */ +# define UDC_DMA_REQ (1 << 12) +#define UDC_TXDMA_CFG (UDC_BASE + 0x44) /* 3 eps for TX DMA */ +#define UDC_DATA_DMA (UDC_BASE + 0x48) /* rx/tx fifo addr */ + +/* rx/tx dma control, numbering channels 1-3 not 0-2 */ +#define UDC_TXDMA(chan) (UDC_BASE + 0x50 - 4 + 4 * (chan)) +# define UDC_TXN_EOT (1 << 15) /* bytes vs packets */ +# define UDC_TXN_START (1 << 14) /* start transfer */ +# define UDC_TXN_TSC 0x03ff /* units in xfer */ +#define UDC_RXDMA(chan) (UDC_BASE + 0x60 - 4 + 4 * (chan)) +# define UDC_RXN_STOP (1 << 15) /* enable EOT irq */ +# define UDC_RXN_TC 0x00ff /* packets in xfer */ + + +/* + * Endpoint configuration registers (used before CFG_LOCK is set) + * UDC_EP_TX(0) is unused + */ +#define UDC_EP_RX(endpoint) (UDC_BASE + 0x80 + (endpoint)*4) +# define UDC_EPN_RX_VALID (1 << 15) +# define UDC_EPN_RX_DB (1 << 14) + /* buffer size in bits 13, 12 */ +# define UDC_EPN_RX_ISO (1 << 11) + /* buffer pointer in low 11 bits */ +#define UDC_EP_TX(endpoint) (UDC_BASE + 0xc0 + (endpoint)*4) + /* same bitfields as in RX */ + +/*-------------------------------------------------------------------------*/ + +struct omap_req { + struct usb_request req; + struct list_head queue; + unsigned dma_bytes; + unsigned mapped:1; +}; + +struct omap_ep { + struct usb_ep ep; + struct list_head queue; + unsigned long irqs; + struct list_head iso; + char name[14]; + u16 maxpacket; + u8 bEndpointAddress; + u8 bmAttributes; + unsigned double_buf:1; + unsigned stopped:1; + unsigned fnf:1; + unsigned has_dma:1; + u8 ackwait; + u8 dma_channel; + u16 dma_counter; + int lch; + struct omap_udc *udc; + struct timer_list timer; +}; + +struct omap_udc { + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + spinlock_t lock; + struct omap_ep ep[32]; + u16 devstat; + u16 clr_halt; + struct usb_phy *transceiver; + struct list_head iso; + unsigned softconnect:1; + unsigned vbus_active:1; + unsigned ep0_pending:1; + unsigned ep0_in:1; + unsigned ep0_set_config:1; + unsigned ep0_reset_config:1; + unsigned ep0_setup:1; + struct completion *done; + struct clk *dc_clk; + struct clk *hhc_clk; + unsigned clk_requested:1; +}; + +/*-------------------------------------------------------------------------*/ + +#ifdef VERBOSE +# define VDBG DBG +#else +# define VDBG(stuff...) do{}while(0) +#endif + +#define ERR(stuff...) pr_err("udc: " stuff) +#define WARNING(stuff...) pr_warn("udc: " stuff) +#define INFO(stuff...) pr_info("udc: " stuff) +#define DBG(stuff...) pr_debug("udc: " stuff) + +/*-------------------------------------------------------------------------*/ + +/* MOD_CONF_CTRL_0 */ +#define VBUS_W2FC_1510 (1 << 17) /* 0 gpio0, 1 dvdd2 pin */ + +/* FUNC_MUX_CTRL_0 */ +#define VBUS_CTRL_1510 (1 << 19) /* 1 connected (software) */ +#define VBUS_MODE_1510 (1 << 18) /* 0 hardware, 1 software */ + +#define HMC_1510 ((omap_readl(MOD_CONF_CTRL_0) >> 1) & 0x3f) +#define HMC_1610 (omap_readl(OTG_SYSCON_2) & 0x3f) +#define HMC (cpu_is_omap15xx() ? HMC_1510 : HMC_1610) + diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c new file mode 100644 index 000000000..4f8617210 --- /dev/null +++ b/drivers/usb/gadget/udc/pch_udc.c @@ -0,0 +1,3163 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd. + */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio/machine.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/irq.h> + +#define PCH_VBUS_PERIOD 3000 /* VBUS polling period (msec) */ +#define PCH_VBUS_INTERVAL 10 /* VBUS polling interval (msec) */ + +/* Address offset of Registers */ +#define UDC_EP_REG_SHIFT 0x20 /* Offset to next EP */ + +#define UDC_EPCTL_ADDR 0x00 /* Endpoint control */ +#define UDC_EPSTS_ADDR 0x04 /* Endpoint status */ +#define UDC_BUFIN_FRAMENUM_ADDR 0x08 /* buffer size in / frame number out */ +#define UDC_BUFOUT_MAXPKT_ADDR 0x0C /* buffer size out / maxpkt in */ +#define UDC_SUBPTR_ADDR 0x10 /* setup buffer pointer */ +#define UDC_DESPTR_ADDR 0x14 /* Data descriptor pointer */ +#define UDC_CONFIRM_ADDR 0x18 /* Write/Read confirmation */ + +#define UDC_DEVCFG_ADDR 0x400 /* Device configuration */ +#define UDC_DEVCTL_ADDR 0x404 /* Device control */ +#define UDC_DEVSTS_ADDR 0x408 /* Device status */ +#define UDC_DEVIRQSTS_ADDR 0x40C /* Device irq status */ +#define UDC_DEVIRQMSK_ADDR 0x410 /* Device irq mask */ +#define UDC_EPIRQSTS_ADDR 0x414 /* Endpoint irq status */ +#define UDC_EPIRQMSK_ADDR 0x418 /* Endpoint irq mask */ +#define UDC_DEVLPM_ADDR 0x41C /* LPM control / status */ +#define UDC_CSR_BUSY_ADDR 0x4f0 /* UDC_CSR_BUSY Status register */ +#define UDC_SRST_ADDR 0x4fc /* SOFT RESET register */ +#define UDC_CSR_ADDR 0x500 /* USB_DEVICE endpoint register */ + +/* Endpoint control register */ +/* Bit position */ +#define UDC_EPCTL_MRXFLUSH (1 << 12) +#define UDC_EPCTL_RRDY (1 << 9) +#define UDC_EPCTL_CNAK (1 << 8) +#define UDC_EPCTL_SNAK (1 << 7) +#define UDC_EPCTL_NAK (1 << 6) +#define UDC_EPCTL_P (1 << 3) +#define UDC_EPCTL_F (1 << 1) +#define UDC_EPCTL_S (1 << 0) +#define UDC_EPCTL_ET_SHIFT 4 +/* Mask patern */ +#define UDC_EPCTL_ET_MASK 0x00000030 +/* Value for ET field */ +#define UDC_EPCTL_ET_CONTROL 0 +#define UDC_EPCTL_ET_ISO 1 +#define UDC_EPCTL_ET_BULK 2 +#define UDC_EPCTL_ET_INTERRUPT 3 + +/* Endpoint status register */ +/* Bit position */ +#define UDC_EPSTS_XFERDONE (1 << 27) +#define UDC_EPSTS_RSS (1 << 26) +#define UDC_EPSTS_RCS (1 << 25) +#define UDC_EPSTS_TXEMPTY (1 << 24) +#define UDC_EPSTS_TDC (1 << 10) +#define UDC_EPSTS_HE (1 << 9) +#define UDC_EPSTS_MRXFIFO_EMP (1 << 8) +#define UDC_EPSTS_BNA (1 << 7) +#define UDC_EPSTS_IN (1 << 6) +#define UDC_EPSTS_OUT_SHIFT 4 +/* Mask patern */ +#define UDC_EPSTS_OUT_MASK 0x00000030 +#define UDC_EPSTS_ALL_CLR_MASK 0x1F0006F0 +/* Value for OUT field */ +#define UDC_EPSTS_OUT_SETUP 2 +#define UDC_EPSTS_OUT_DATA 1 + +/* Device configuration register */ +/* Bit position */ +#define UDC_DEVCFG_CSR_PRG (1 << 17) +#define UDC_DEVCFG_SP (1 << 3) +/* SPD Valee */ +#define UDC_DEVCFG_SPD_HS 0x0 +#define UDC_DEVCFG_SPD_FS 0x1 +#define UDC_DEVCFG_SPD_LS 0x2 + +/* Device control register */ +/* Bit position */ +#define UDC_DEVCTL_THLEN_SHIFT 24 +#define UDC_DEVCTL_BRLEN_SHIFT 16 +#define UDC_DEVCTL_CSR_DONE (1 << 13) +#define UDC_DEVCTL_SD (1 << 10) +#define UDC_DEVCTL_MODE (1 << 9) +#define UDC_DEVCTL_BREN (1 << 8) +#define UDC_DEVCTL_THE (1 << 7) +#define UDC_DEVCTL_DU (1 << 4) +#define UDC_DEVCTL_TDE (1 << 3) +#define UDC_DEVCTL_RDE (1 << 2) +#define UDC_DEVCTL_RES (1 << 0) + +/* Device status register */ +/* Bit position */ +#define UDC_DEVSTS_TS_SHIFT 18 +#define UDC_DEVSTS_ENUM_SPEED_SHIFT 13 +#define UDC_DEVSTS_ALT_SHIFT 8 +#define UDC_DEVSTS_INTF_SHIFT 4 +#define UDC_DEVSTS_CFG_SHIFT 0 +/* Mask patern */ +#define UDC_DEVSTS_TS_MASK 0xfffc0000 +#define UDC_DEVSTS_ENUM_SPEED_MASK 0x00006000 +#define UDC_DEVSTS_ALT_MASK 0x00000f00 +#define UDC_DEVSTS_INTF_MASK 0x000000f0 +#define UDC_DEVSTS_CFG_MASK 0x0000000f +/* value for maximum speed for SPEED field */ +#define UDC_DEVSTS_ENUM_SPEED_FULL 1 +#define UDC_DEVSTS_ENUM_SPEED_HIGH 0 +#define UDC_DEVSTS_ENUM_SPEED_LOW 2 +#define UDC_DEVSTS_ENUM_SPEED_FULLX 3 + +/* Device irq register */ +/* Bit position */ +#define UDC_DEVINT_RWKP (1 << 7) +#define UDC_DEVINT_ENUM (1 << 6) +#define UDC_DEVINT_SOF (1 << 5) +#define UDC_DEVINT_US (1 << 4) +#define UDC_DEVINT_UR (1 << 3) +#define UDC_DEVINT_ES (1 << 2) +#define UDC_DEVINT_SI (1 << 1) +#define UDC_DEVINT_SC (1 << 0) +/* Mask patern */ +#define UDC_DEVINT_MSK 0x7f + +/* Endpoint irq register */ +/* Bit position */ +#define UDC_EPINT_IN_SHIFT 0 +#define UDC_EPINT_OUT_SHIFT 16 +#define UDC_EPINT_IN_EP0 (1 << 0) +#define UDC_EPINT_OUT_EP0 (1 << 16) +/* Mask patern */ +#define UDC_EPINT_MSK_DISABLE_ALL 0xffffffff + +/* UDC_CSR_BUSY Status register */ +/* Bit position */ +#define UDC_CSR_BUSY (1 << 0) + +/* SOFT RESET register */ +/* Bit position */ +#define UDC_PSRST (1 << 1) +#define UDC_SRST (1 << 0) + +/* USB_DEVICE endpoint register */ +/* Bit position */ +#define UDC_CSR_NE_NUM_SHIFT 0 +#define UDC_CSR_NE_DIR_SHIFT 4 +#define UDC_CSR_NE_TYPE_SHIFT 5 +#define UDC_CSR_NE_CFG_SHIFT 7 +#define UDC_CSR_NE_INTF_SHIFT 11 +#define UDC_CSR_NE_ALT_SHIFT 15 +#define UDC_CSR_NE_MAX_PKT_SHIFT 19 +/* Mask patern */ +#define UDC_CSR_NE_NUM_MASK 0x0000000f +#define UDC_CSR_NE_DIR_MASK 0x00000010 +#define UDC_CSR_NE_TYPE_MASK 0x00000060 +#define UDC_CSR_NE_CFG_MASK 0x00000780 +#define UDC_CSR_NE_INTF_MASK 0x00007800 +#define UDC_CSR_NE_ALT_MASK 0x00078000 +#define UDC_CSR_NE_MAX_PKT_MASK 0x3ff80000 + +#define PCH_UDC_CSR(ep) (UDC_CSR_ADDR + ep*4) +#define PCH_UDC_EPINT(in, num)\ + (1 << (num + (in ? UDC_EPINT_IN_SHIFT : UDC_EPINT_OUT_SHIFT))) + +/* Index of endpoint */ +#define UDC_EP0IN_IDX 0 +#define UDC_EP0OUT_IDX 1 +#define UDC_EPIN_IDX(ep) (ep * 2) +#define UDC_EPOUT_IDX(ep) (ep * 2 + 1) +#define PCH_UDC_EP0 0 +#define PCH_UDC_EP1 1 +#define PCH_UDC_EP2 2 +#define PCH_UDC_EP3 3 + +/* Number of endpoint */ +#define PCH_UDC_EP_NUM 32 /* Total number of EPs (16 IN,16 OUT) */ +#define PCH_UDC_USED_EP_NUM 4 /* EP number of EP's really used */ +/* Length Value */ +#define PCH_UDC_BRLEN 0x0F /* Burst length */ +#define PCH_UDC_THLEN 0x1F /* Threshold length */ +/* Value of EP Buffer Size */ +#define UDC_EP0IN_BUFF_SIZE 16 +#define UDC_EPIN_BUFF_SIZE 256 +#define UDC_EP0OUT_BUFF_SIZE 16 +#define UDC_EPOUT_BUFF_SIZE 256 +/* Value of EP maximum packet size */ +#define UDC_EP0IN_MAX_PKT_SIZE 64 +#define UDC_EP0OUT_MAX_PKT_SIZE 64 +#define UDC_BULK_MAX_PKT_SIZE 512 + +/* DMA */ +#define DMA_DIR_RX 1 /* DMA for data receive */ +#define DMA_DIR_TX 2 /* DMA for data transmit */ +#define DMA_ADDR_INVALID (~(dma_addr_t)0) +#define UDC_DMA_MAXPACKET 65536 /* maximum packet size for DMA */ + +/** + * struct pch_udc_data_dma_desc - Structure to hold DMA descriptor information + * for data + * @status: Status quadlet + * @reserved: Reserved + * @dataptr: Buffer descriptor + * @next: Next descriptor + */ +struct pch_udc_data_dma_desc { + u32 status; + u32 reserved; + u32 dataptr; + u32 next; +}; + +/** + * struct pch_udc_stp_dma_desc - Structure to hold DMA descriptor information + * for control data + * @status: Status + * @reserved: Reserved + * @request: Control Request + */ +struct pch_udc_stp_dma_desc { + u32 status; + u32 reserved; + struct usb_ctrlrequest request; +} __attribute((packed)); + +/* DMA status definitions */ +/* Buffer status */ +#define PCH_UDC_BUFF_STS 0xC0000000 +#define PCH_UDC_BS_HST_RDY 0x00000000 +#define PCH_UDC_BS_DMA_BSY 0x40000000 +#define PCH_UDC_BS_DMA_DONE 0x80000000 +#define PCH_UDC_BS_HST_BSY 0xC0000000 +/* Rx/Tx Status */ +#define PCH_UDC_RXTX_STS 0x30000000 +#define PCH_UDC_RTS_SUCC 0x00000000 +#define PCH_UDC_RTS_DESERR 0x10000000 +#define PCH_UDC_RTS_BUFERR 0x30000000 +/* Last Descriptor Indication */ +#define PCH_UDC_DMA_LAST 0x08000000 +/* Number of Rx/Tx Bytes Mask */ +#define PCH_UDC_RXTX_BYTES 0x0000ffff + +/** + * struct pch_udc_cfg_data - Structure to hold current configuration + * and interface information + * @cur_cfg: current configuration in use + * @cur_intf: current interface in use + * @cur_alt: current alt interface in use + */ +struct pch_udc_cfg_data { + u16 cur_cfg; + u16 cur_intf; + u16 cur_alt; +}; + +/** + * struct pch_udc_ep - Structure holding a PCH USB device Endpoint information + * @ep: embedded ep request + * @td_stp_phys: for setup request + * @td_data_phys: for data request + * @td_stp: for setup request + * @td_data: for data request + * @dev: reference to device struct + * @offset_addr: offset address of ep register + * @desc: for this ep + * @queue: queue for requests + * @num: endpoint number + * @in: endpoint is IN + * @halted: endpoint halted? + * @epsts: Endpoint status + */ +struct pch_udc_ep { + struct usb_ep ep; + dma_addr_t td_stp_phys; + dma_addr_t td_data_phys; + struct pch_udc_stp_dma_desc *td_stp; + struct pch_udc_data_dma_desc *td_data; + struct pch_udc_dev *dev; + unsigned long offset_addr; + struct list_head queue; + unsigned num:5, + in:1, + halted:1; + unsigned long epsts; +}; + +/** + * struct pch_vbus_gpio_data - Structure holding GPIO informaton + * for detecting VBUS + * @port: gpio descriptor for the VBUS GPIO + * @intr: gpio interrupt number + * @irq_work_fall: Structure for WorkQueue + * @irq_work_rise: Structure for WorkQueue + */ +struct pch_vbus_gpio_data { + struct gpio_desc *port; + int intr; + struct work_struct irq_work_fall; + struct work_struct irq_work_rise; +}; + +/** + * struct pch_udc_dev - Structure holding complete information + * of the PCH USB device + * @gadget: gadget driver data + * @driver: reference to gadget driver bound + * @pdev: reference to the PCI device + * @ep: array of endpoints + * @lock: protects all state + * @stall: stall requested + * @prot_stall: protcol stall requested + * @registered: driver registered with system + * @suspended: driver in suspended state + * @connected: gadget driver associated + * @vbus_session: required vbus_session state + * @set_cfg_not_acked: pending acknowledgement 4 setup + * @waiting_zlp_ack: pending acknowledgement 4 ZLP + * @data_requests: DMA pool for data requests + * @stp_requests: DMA pool for setup requests + * @dma_addr: DMA pool for received + * @setup_data: Received setup data + * @base_addr: for mapped device memory + * @bar: PCI BAR used for mapped device memory + * @cfg_data: current cfg, intf, and alt in use + * @vbus_gpio: GPIO informaton for detecting VBUS + */ +struct pch_udc_dev { + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + struct pci_dev *pdev; + struct pch_udc_ep ep[PCH_UDC_EP_NUM]; + spinlock_t lock; /* protects all state */ + unsigned + stall:1, + prot_stall:1, + suspended:1, + connected:1, + vbus_session:1, + set_cfg_not_acked:1, + waiting_zlp_ack:1; + struct dma_pool *data_requests; + struct dma_pool *stp_requests; + dma_addr_t dma_addr; + struct usb_ctrlrequest setup_data; + void __iomem *base_addr; + unsigned short bar; + struct pch_udc_cfg_data cfg_data; + struct pch_vbus_gpio_data vbus_gpio; +}; +#define to_pch_udc(g) (container_of((g), struct pch_udc_dev, gadget)) + +#define PCH_UDC_PCI_BAR_QUARK_X1000 0 +#define PCH_UDC_PCI_BAR 1 + +#define PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC 0x0939 +#define PCI_DEVICE_ID_INTEL_EG20T_UDC 0x8808 + +#define PCI_DEVICE_ID_ML7213_IOH_UDC 0x801D +#define PCI_DEVICE_ID_ML7831_IOH_UDC 0x8808 + +static const char ep0_string[] = "ep0in"; +static DEFINE_SPINLOCK(udc_stall_spinlock); /* stall spin lock */ +static bool speed_fs; +module_param_named(speed_fs, speed_fs, bool, S_IRUGO); +MODULE_PARM_DESC(speed_fs, "true for Full speed operation"); + +/** + * struct pch_udc_request - Structure holding a PCH USB device request packet + * @req: embedded ep request + * @td_data_phys: phys. address + * @td_data: first dma desc. of chain + * @td_data_last: last dma desc. of chain + * @queue: associated queue + * @dma_going: DMA in progress for request + * @dma_done: DMA completed for request + * @chain_len: chain length + */ +struct pch_udc_request { + struct usb_request req; + dma_addr_t td_data_phys; + struct pch_udc_data_dma_desc *td_data; + struct pch_udc_data_dma_desc *td_data_last; + struct list_head queue; + unsigned dma_going:1, + dma_done:1; + unsigned chain_len; +}; + +static inline u32 pch_udc_readl(struct pch_udc_dev *dev, unsigned long reg) +{ + return ioread32(dev->base_addr + reg); +} + +static inline void pch_udc_writel(struct pch_udc_dev *dev, + unsigned long val, unsigned long reg) +{ + iowrite32(val, dev->base_addr + reg); +} + +static inline void pch_udc_bit_set(struct pch_udc_dev *dev, + unsigned long reg, + unsigned long bitmask) +{ + pch_udc_writel(dev, pch_udc_readl(dev, reg) | bitmask, reg); +} + +static inline void pch_udc_bit_clr(struct pch_udc_dev *dev, + unsigned long reg, + unsigned long bitmask) +{ + pch_udc_writel(dev, pch_udc_readl(dev, reg) & ~(bitmask), reg); +} + +static inline u32 pch_udc_ep_readl(struct pch_udc_ep *ep, unsigned long reg) +{ + return ioread32(ep->dev->base_addr + ep->offset_addr + reg); +} + +static inline void pch_udc_ep_writel(struct pch_udc_ep *ep, + unsigned long val, unsigned long reg) +{ + iowrite32(val, ep->dev->base_addr + ep->offset_addr + reg); +} + +static inline void pch_udc_ep_bit_set(struct pch_udc_ep *ep, + unsigned long reg, + unsigned long bitmask) +{ + pch_udc_ep_writel(ep, pch_udc_ep_readl(ep, reg) | bitmask, reg); +} + +static inline void pch_udc_ep_bit_clr(struct pch_udc_ep *ep, + unsigned long reg, + unsigned long bitmask) +{ + pch_udc_ep_writel(ep, pch_udc_ep_readl(ep, reg) & ~(bitmask), reg); +} + +/** + * pch_udc_csr_busy() - Wait till idle. + * @dev: Reference to pch_udc_dev structure + */ +static void pch_udc_csr_busy(struct pch_udc_dev *dev) +{ + unsigned int count = 200; + + /* Wait till idle */ + while ((pch_udc_readl(dev, UDC_CSR_BUSY_ADDR) & UDC_CSR_BUSY) + && --count) + cpu_relax(); + if (!count) + dev_err(&dev->pdev->dev, "%s: wait error\n", __func__); +} + +/** + * pch_udc_write_csr() - Write the command and status registers. + * @dev: Reference to pch_udc_dev structure + * @val: value to be written to CSR register + * @ep: end-point number + */ +static void pch_udc_write_csr(struct pch_udc_dev *dev, unsigned long val, + unsigned int ep) +{ + unsigned long reg = PCH_UDC_CSR(ep); + + pch_udc_csr_busy(dev); /* Wait till idle */ + pch_udc_writel(dev, val, reg); + pch_udc_csr_busy(dev); /* Wait till idle */ +} + +/** + * pch_udc_read_csr() - Read the command and status registers. + * @dev: Reference to pch_udc_dev structure + * @ep: end-point number + * + * Return codes: content of CSR register + */ +static u32 pch_udc_read_csr(struct pch_udc_dev *dev, unsigned int ep) +{ + unsigned long reg = PCH_UDC_CSR(ep); + + pch_udc_csr_busy(dev); /* Wait till idle */ + pch_udc_readl(dev, reg); /* Dummy read */ + pch_udc_csr_busy(dev); /* Wait till idle */ + return pch_udc_readl(dev, reg); +} + +/** + * pch_udc_rmt_wakeup() - Initiate for remote wakeup + * @dev: Reference to pch_udc_dev structure + */ +static inline void pch_udc_rmt_wakeup(struct pch_udc_dev *dev) +{ + pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES); + mdelay(1); + pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES); +} + +/** + * pch_udc_get_frame() - Get the current frame from device status register + * @dev: Reference to pch_udc_dev structure + * Retern current frame + */ +static inline int pch_udc_get_frame(struct pch_udc_dev *dev) +{ + u32 frame = pch_udc_readl(dev, UDC_DEVSTS_ADDR); + return (frame & UDC_DEVSTS_TS_MASK) >> UDC_DEVSTS_TS_SHIFT; +} + +/** + * pch_udc_clear_selfpowered() - Clear the self power control + * @dev: Reference to pch_udc_regs structure + */ +static inline void pch_udc_clear_selfpowered(struct pch_udc_dev *dev) +{ + pch_udc_bit_clr(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_SP); +} + +/** + * pch_udc_set_selfpowered() - Set the self power control + * @dev: Reference to pch_udc_regs structure + */ +static inline void pch_udc_set_selfpowered(struct pch_udc_dev *dev) +{ + pch_udc_bit_set(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_SP); +} + +/** + * pch_udc_set_disconnect() - Set the disconnect status. + * @dev: Reference to pch_udc_regs structure + */ +static inline void pch_udc_set_disconnect(struct pch_udc_dev *dev) +{ + pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_SD); +} + +/** + * pch_udc_clear_disconnect() - Clear the disconnect status. + * @dev: Reference to pch_udc_regs structure + */ +static void pch_udc_clear_disconnect(struct pch_udc_dev *dev) +{ + /* Clear the disconnect */ + pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES); + pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_SD); + mdelay(1); + /* Resume USB signalling */ + pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES); +} + +static void pch_udc_init(struct pch_udc_dev *dev); + +/** + * pch_udc_reconnect() - This API initializes usb device controller, + * and clear the disconnect status. + * @dev: Reference to pch_udc_regs structure + */ +static void pch_udc_reconnect(struct pch_udc_dev *dev) +{ + pch_udc_init(dev); + + /* enable device interrupts */ + /* pch_udc_enable_interrupts() */ + pch_udc_bit_clr(dev, UDC_DEVIRQMSK_ADDR, + UDC_DEVINT_UR | UDC_DEVINT_ENUM); + + /* Clear the disconnect */ + pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES); + pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_SD); + mdelay(1); + /* Resume USB signalling */ + pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES); +} + +/** + * pch_udc_vbus_session() - set or clearr the disconnect status. + * @dev: Reference to pch_udc_regs structure + * @is_active: Parameter specifying the action + * 0: indicating VBUS power is ending + * !0: indicating VBUS power is starting + */ +static inline void pch_udc_vbus_session(struct pch_udc_dev *dev, + int is_active) +{ + unsigned long iflags; + + spin_lock_irqsave(&dev->lock, iflags); + if (is_active) { + pch_udc_reconnect(dev); + dev->vbus_session = 1; + } else { + if (dev->driver && dev->driver->disconnect) { + spin_unlock_irqrestore(&dev->lock, iflags); + dev->driver->disconnect(&dev->gadget); + spin_lock_irqsave(&dev->lock, iflags); + } + pch_udc_set_disconnect(dev); + dev->vbus_session = 0; + } + spin_unlock_irqrestore(&dev->lock, iflags); +} + +/** + * pch_udc_ep_set_stall() - Set the stall of endpoint + * @ep: Reference to structure of type pch_udc_ep_regs + */ +static void pch_udc_ep_set_stall(struct pch_udc_ep *ep) +{ + if (ep->in) { + pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_F); + pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_S); + } else { + pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_S); + } +} + +/** + * pch_udc_ep_clear_stall() - Clear the stall of endpoint + * @ep: Reference to structure of type pch_udc_ep_regs + */ +static inline void pch_udc_ep_clear_stall(struct pch_udc_ep *ep) +{ + /* Clear the stall */ + pch_udc_ep_bit_clr(ep, UDC_EPCTL_ADDR, UDC_EPCTL_S); + /* Clear NAK by writing CNAK */ + pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_CNAK); +} + +/** + * pch_udc_ep_set_trfr_type() - Set the transfer type of endpoint + * @ep: Reference to structure of type pch_udc_ep_regs + * @type: Type of endpoint + */ +static inline void pch_udc_ep_set_trfr_type(struct pch_udc_ep *ep, + u8 type) +{ + pch_udc_ep_writel(ep, ((type << UDC_EPCTL_ET_SHIFT) & + UDC_EPCTL_ET_MASK), UDC_EPCTL_ADDR); +} + +/** + * pch_udc_ep_set_bufsz() - Set the maximum packet size for the endpoint + * @ep: Reference to structure of type pch_udc_ep_regs + * @buf_size: The buffer word size + * @ep_in: EP is IN + */ +static void pch_udc_ep_set_bufsz(struct pch_udc_ep *ep, + u32 buf_size, u32 ep_in) +{ + u32 data; + if (ep_in) { + data = pch_udc_ep_readl(ep, UDC_BUFIN_FRAMENUM_ADDR); + data = (data & 0xffff0000) | (buf_size & 0xffff); + pch_udc_ep_writel(ep, data, UDC_BUFIN_FRAMENUM_ADDR); + } else { + data = pch_udc_ep_readl(ep, UDC_BUFOUT_MAXPKT_ADDR); + data = (buf_size << 16) | (data & 0xffff); + pch_udc_ep_writel(ep, data, UDC_BUFOUT_MAXPKT_ADDR); + } +} + +/** + * pch_udc_ep_set_maxpkt() - Set the Max packet size for the endpoint + * @ep: Reference to structure of type pch_udc_ep_regs + * @pkt_size: The packet byte size + */ +static void pch_udc_ep_set_maxpkt(struct pch_udc_ep *ep, u32 pkt_size) +{ + u32 data = pch_udc_ep_readl(ep, UDC_BUFOUT_MAXPKT_ADDR); + data = (data & 0xffff0000) | (pkt_size & 0xffff); + pch_udc_ep_writel(ep, data, UDC_BUFOUT_MAXPKT_ADDR); +} + +/** + * pch_udc_ep_set_subptr() - Set the Setup buffer pointer for the endpoint + * @ep: Reference to structure of type pch_udc_ep_regs + * @addr: Address of the register + */ +static inline void pch_udc_ep_set_subptr(struct pch_udc_ep *ep, u32 addr) +{ + pch_udc_ep_writel(ep, addr, UDC_SUBPTR_ADDR); +} + +/** + * pch_udc_ep_set_ddptr() - Set the Data descriptor pointer for the endpoint + * @ep: Reference to structure of type pch_udc_ep_regs + * @addr: Address of the register + */ +static inline void pch_udc_ep_set_ddptr(struct pch_udc_ep *ep, u32 addr) +{ + pch_udc_ep_writel(ep, addr, UDC_DESPTR_ADDR); +} + +/** + * pch_udc_ep_set_pd() - Set the poll demand bit for the endpoint + * @ep: Reference to structure of type pch_udc_ep_regs + */ +static inline void pch_udc_ep_set_pd(struct pch_udc_ep *ep) +{ + pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_P); +} + +/** + * pch_udc_ep_set_rrdy() - Set the receive ready bit for the endpoint + * @ep: Reference to structure of type pch_udc_ep_regs + */ +static inline void pch_udc_ep_set_rrdy(struct pch_udc_ep *ep) +{ + pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_RRDY); +} + +/** + * pch_udc_ep_clear_rrdy() - Clear the receive ready bit for the endpoint + * @ep: Reference to structure of type pch_udc_ep_regs + */ +static inline void pch_udc_ep_clear_rrdy(struct pch_udc_ep *ep) +{ + pch_udc_ep_bit_clr(ep, UDC_EPCTL_ADDR, UDC_EPCTL_RRDY); +} + +/** + * pch_udc_set_dma() - Set the 'TDE' or RDE bit of device control + * register depending on the direction specified + * @dev: Reference to structure of type pch_udc_regs + * @dir: whether Tx or Rx + * DMA_DIR_RX: Receive + * DMA_DIR_TX: Transmit + */ +static inline void pch_udc_set_dma(struct pch_udc_dev *dev, int dir) +{ + if (dir == DMA_DIR_RX) + pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RDE); + else if (dir == DMA_DIR_TX) + pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_TDE); +} + +/** + * pch_udc_clear_dma() - Clear the 'TDE' or RDE bit of device control + * register depending on the direction specified + * @dev: Reference to structure of type pch_udc_regs + * @dir: Whether Tx or Rx + * DMA_DIR_RX: Receive + * DMA_DIR_TX: Transmit + */ +static inline void pch_udc_clear_dma(struct pch_udc_dev *dev, int dir) +{ + if (dir == DMA_DIR_RX) + pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RDE); + else if (dir == DMA_DIR_TX) + pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_TDE); +} + +/** + * pch_udc_set_csr_done() - Set the device control register + * CSR done field (bit 13) + * @dev: reference to structure of type pch_udc_regs + */ +static inline void pch_udc_set_csr_done(struct pch_udc_dev *dev) +{ + pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_CSR_DONE); +} + +/** + * pch_udc_disable_interrupts() - Disables the specified interrupts + * @dev: Reference to structure of type pch_udc_regs + * @mask: Mask to disable interrupts + */ +static inline void pch_udc_disable_interrupts(struct pch_udc_dev *dev, + u32 mask) +{ + pch_udc_bit_set(dev, UDC_DEVIRQMSK_ADDR, mask); +} + +/** + * pch_udc_enable_interrupts() - Enable the specified interrupts + * @dev: Reference to structure of type pch_udc_regs + * @mask: Mask to enable interrupts + */ +static inline void pch_udc_enable_interrupts(struct pch_udc_dev *dev, + u32 mask) +{ + pch_udc_bit_clr(dev, UDC_DEVIRQMSK_ADDR, mask); +} + +/** + * pch_udc_disable_ep_interrupts() - Disable endpoint interrupts + * @dev: Reference to structure of type pch_udc_regs + * @mask: Mask to disable interrupts + */ +static inline void pch_udc_disable_ep_interrupts(struct pch_udc_dev *dev, + u32 mask) +{ + pch_udc_bit_set(dev, UDC_EPIRQMSK_ADDR, mask); +} + +/** + * pch_udc_enable_ep_interrupts() - Enable endpoint interrupts + * @dev: Reference to structure of type pch_udc_regs + * @mask: Mask to enable interrupts + */ +static inline void pch_udc_enable_ep_interrupts(struct pch_udc_dev *dev, + u32 mask) +{ + pch_udc_bit_clr(dev, UDC_EPIRQMSK_ADDR, mask); +} + +/** + * pch_udc_read_device_interrupts() - Read the device interrupts + * @dev: Reference to structure of type pch_udc_regs + * Retern The device interrupts + */ +static inline u32 pch_udc_read_device_interrupts(struct pch_udc_dev *dev) +{ + return pch_udc_readl(dev, UDC_DEVIRQSTS_ADDR); +} + +/** + * pch_udc_write_device_interrupts() - Write device interrupts + * @dev: Reference to structure of type pch_udc_regs + * @val: The value to be written to interrupt register + */ +static inline void pch_udc_write_device_interrupts(struct pch_udc_dev *dev, + u32 val) +{ + pch_udc_writel(dev, val, UDC_DEVIRQSTS_ADDR); +} + +/** + * pch_udc_read_ep_interrupts() - Read the endpoint interrupts + * @dev: Reference to structure of type pch_udc_regs + * Retern The endpoint interrupt + */ +static inline u32 pch_udc_read_ep_interrupts(struct pch_udc_dev *dev) +{ + return pch_udc_readl(dev, UDC_EPIRQSTS_ADDR); +} + +/** + * pch_udc_write_ep_interrupts() - Clear endpoint interupts + * @dev: Reference to structure of type pch_udc_regs + * @val: The value to be written to interrupt register + */ +static inline void pch_udc_write_ep_interrupts(struct pch_udc_dev *dev, + u32 val) +{ + pch_udc_writel(dev, val, UDC_EPIRQSTS_ADDR); +} + +/** + * pch_udc_read_device_status() - Read the device status + * @dev: Reference to structure of type pch_udc_regs + * Retern The device status + */ +static inline u32 pch_udc_read_device_status(struct pch_udc_dev *dev) +{ + return pch_udc_readl(dev, UDC_DEVSTS_ADDR); +} + +/** + * pch_udc_read_ep_control() - Read the endpoint control + * @ep: Reference to structure of type pch_udc_ep_regs + * Retern The endpoint control register value + */ +static inline u32 pch_udc_read_ep_control(struct pch_udc_ep *ep) +{ + return pch_udc_ep_readl(ep, UDC_EPCTL_ADDR); +} + +/** + * pch_udc_clear_ep_control() - Clear the endpoint control register + * @ep: Reference to structure of type pch_udc_ep_regs + * Retern The endpoint control register value + */ +static inline void pch_udc_clear_ep_control(struct pch_udc_ep *ep) +{ + return pch_udc_ep_writel(ep, 0, UDC_EPCTL_ADDR); +} + +/** + * pch_udc_read_ep_status() - Read the endpoint status + * @ep: Reference to structure of type pch_udc_ep_regs + * Retern The endpoint status + */ +static inline u32 pch_udc_read_ep_status(struct pch_udc_ep *ep) +{ + return pch_udc_ep_readl(ep, UDC_EPSTS_ADDR); +} + +/** + * pch_udc_clear_ep_status() - Clear the endpoint status + * @ep: Reference to structure of type pch_udc_ep_regs + * @stat: Endpoint status + */ +static inline void pch_udc_clear_ep_status(struct pch_udc_ep *ep, + u32 stat) +{ + return pch_udc_ep_writel(ep, stat, UDC_EPSTS_ADDR); +} + +/** + * pch_udc_ep_set_nak() - Set the bit 7 (SNAK field) + * of the endpoint control register + * @ep: Reference to structure of type pch_udc_ep_regs + */ +static inline void pch_udc_ep_set_nak(struct pch_udc_ep *ep) +{ + pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_SNAK); +} + +/** + * pch_udc_ep_clear_nak() - Set the bit 8 (CNAK field) + * of the endpoint control register + * @ep: reference to structure of type pch_udc_ep_regs + */ +static void pch_udc_ep_clear_nak(struct pch_udc_ep *ep) +{ + unsigned int loopcnt = 0; + struct pch_udc_dev *dev = ep->dev; + + if (!(pch_udc_ep_readl(ep, UDC_EPCTL_ADDR) & UDC_EPCTL_NAK)) + return; + if (!ep->in) { + loopcnt = 10000; + while (!(pch_udc_read_ep_status(ep) & UDC_EPSTS_MRXFIFO_EMP) && + --loopcnt) + udelay(5); + if (!loopcnt) + dev_err(&dev->pdev->dev, "%s: RxFIFO not Empty\n", + __func__); + } + loopcnt = 10000; + while ((pch_udc_read_ep_control(ep) & UDC_EPCTL_NAK) && --loopcnt) { + pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_CNAK); + udelay(5); + } + if (!loopcnt) + dev_err(&dev->pdev->dev, "%s: Clear NAK not set for ep%d%s\n", + __func__, ep->num, (ep->in ? "in" : "out")); +} + +/** + * pch_udc_ep_fifo_flush() - Flush the endpoint fifo + * @ep: reference to structure of type pch_udc_ep_regs + * @dir: direction of endpoint + * 0: endpoint is OUT + * !0: endpoint is IN + */ +static void pch_udc_ep_fifo_flush(struct pch_udc_ep *ep, int dir) +{ + if (dir) { /* IN ep */ + pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_F); + return; + } +} + +/** + * pch_udc_ep_enable() - This api enables endpoint + * @ep: reference to structure of type pch_udc_ep_regs + * @cfg: current configuration information + * @desc: endpoint descriptor + */ +static void pch_udc_ep_enable(struct pch_udc_ep *ep, + struct pch_udc_cfg_data *cfg, + const struct usb_endpoint_descriptor *desc) +{ + u32 val = 0; + u32 buff_size = 0; + + pch_udc_ep_set_trfr_type(ep, desc->bmAttributes); + if (ep->in) + buff_size = UDC_EPIN_BUFF_SIZE; + else + buff_size = UDC_EPOUT_BUFF_SIZE; + pch_udc_ep_set_bufsz(ep, buff_size, ep->in); + pch_udc_ep_set_maxpkt(ep, usb_endpoint_maxp(desc)); + pch_udc_ep_set_nak(ep); + pch_udc_ep_fifo_flush(ep, ep->in); + /* Configure the endpoint */ + val = ep->num << UDC_CSR_NE_NUM_SHIFT | ep->in << UDC_CSR_NE_DIR_SHIFT | + ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) << + UDC_CSR_NE_TYPE_SHIFT) | + (cfg->cur_cfg << UDC_CSR_NE_CFG_SHIFT) | + (cfg->cur_intf << UDC_CSR_NE_INTF_SHIFT) | + (cfg->cur_alt << UDC_CSR_NE_ALT_SHIFT) | + usb_endpoint_maxp(desc) << UDC_CSR_NE_MAX_PKT_SHIFT; + + if (ep->in) + pch_udc_write_csr(ep->dev, val, UDC_EPIN_IDX(ep->num)); + else + pch_udc_write_csr(ep->dev, val, UDC_EPOUT_IDX(ep->num)); +} + +/** + * pch_udc_ep_disable() - This api disables endpoint + * @ep: reference to structure of type pch_udc_ep_regs + */ +static void pch_udc_ep_disable(struct pch_udc_ep *ep) +{ + if (ep->in) { + /* flush the fifo */ + pch_udc_ep_writel(ep, UDC_EPCTL_F, UDC_EPCTL_ADDR); + /* set NAK */ + pch_udc_ep_writel(ep, UDC_EPCTL_SNAK, UDC_EPCTL_ADDR); + pch_udc_ep_bit_set(ep, UDC_EPSTS_ADDR, UDC_EPSTS_IN); + } else { + /* set NAK */ + pch_udc_ep_writel(ep, UDC_EPCTL_SNAK, UDC_EPCTL_ADDR); + } + /* reset desc pointer */ + pch_udc_ep_writel(ep, 0, UDC_DESPTR_ADDR); +} + +/** + * pch_udc_wait_ep_stall() - Wait EP stall. + * @ep: reference to structure of type pch_udc_ep_regs + */ +static void pch_udc_wait_ep_stall(struct pch_udc_ep *ep) +{ + unsigned int count = 10000; + + /* Wait till idle */ + while ((pch_udc_read_ep_control(ep) & UDC_EPCTL_S) && --count) + udelay(5); + if (!count) + dev_err(&ep->dev->pdev->dev, "%s: wait error\n", __func__); +} + +/** + * pch_udc_init() - This API initializes usb device controller + * @dev: Rreference to pch_udc_regs structure + */ +static void pch_udc_init(struct pch_udc_dev *dev) +{ + if (NULL == dev) { + pr_err("%s: Invalid address\n", __func__); + return; + } + /* Soft Reset and Reset PHY */ + pch_udc_writel(dev, UDC_SRST, UDC_SRST_ADDR); + pch_udc_writel(dev, UDC_SRST | UDC_PSRST, UDC_SRST_ADDR); + mdelay(1); + pch_udc_writel(dev, UDC_SRST, UDC_SRST_ADDR); + pch_udc_writel(dev, 0x00, UDC_SRST_ADDR); + mdelay(1); + /* mask and clear all device interrupts */ + pch_udc_bit_set(dev, UDC_DEVIRQMSK_ADDR, UDC_DEVINT_MSK); + pch_udc_bit_set(dev, UDC_DEVIRQSTS_ADDR, UDC_DEVINT_MSK); + + /* mask and clear all ep interrupts */ + pch_udc_bit_set(dev, UDC_EPIRQMSK_ADDR, UDC_EPINT_MSK_DISABLE_ALL); + pch_udc_bit_set(dev, UDC_EPIRQSTS_ADDR, UDC_EPINT_MSK_DISABLE_ALL); + + /* enable dynamic CSR programmingi, self powered and device speed */ + if (speed_fs) + pch_udc_bit_set(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_CSR_PRG | + UDC_DEVCFG_SP | UDC_DEVCFG_SPD_FS); + else /* defaul high speed */ + pch_udc_bit_set(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_CSR_PRG | + UDC_DEVCFG_SP | UDC_DEVCFG_SPD_HS); + pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, + (PCH_UDC_THLEN << UDC_DEVCTL_THLEN_SHIFT) | + (PCH_UDC_BRLEN << UDC_DEVCTL_BRLEN_SHIFT) | + UDC_DEVCTL_MODE | UDC_DEVCTL_BREN | + UDC_DEVCTL_THE); +} + +/** + * pch_udc_exit() - This API exit usb device controller + * @dev: Reference to pch_udc_regs structure + */ +static void pch_udc_exit(struct pch_udc_dev *dev) +{ + /* mask all device interrupts */ + pch_udc_bit_set(dev, UDC_DEVIRQMSK_ADDR, UDC_DEVINT_MSK); + /* mask all ep interrupts */ + pch_udc_bit_set(dev, UDC_EPIRQMSK_ADDR, UDC_EPINT_MSK_DISABLE_ALL); + /* put device in disconnected state */ + pch_udc_set_disconnect(dev); +} + +/** + * pch_udc_pcd_get_frame() - This API is invoked to get the current frame number + * @gadget: Reference to the gadget driver + * + * Return codes: + * 0: Success + * -EINVAL: If the gadget passed is NULL + */ +static int pch_udc_pcd_get_frame(struct usb_gadget *gadget) +{ + struct pch_udc_dev *dev; + + if (!gadget) + return -EINVAL; + dev = container_of(gadget, struct pch_udc_dev, gadget); + return pch_udc_get_frame(dev); +} + +/** + * pch_udc_pcd_wakeup() - This API is invoked to initiate a remote wakeup + * @gadget: Reference to the gadget driver + * + * Return codes: + * 0: Success + * -EINVAL: If the gadget passed is NULL + */ +static int pch_udc_pcd_wakeup(struct usb_gadget *gadget) +{ + struct pch_udc_dev *dev; + unsigned long flags; + + if (!gadget) + return -EINVAL; + dev = container_of(gadget, struct pch_udc_dev, gadget); + spin_lock_irqsave(&dev->lock, flags); + pch_udc_rmt_wakeup(dev); + spin_unlock_irqrestore(&dev->lock, flags); + return 0; +} + +/** + * pch_udc_pcd_selfpowered() - This API is invoked to specify whether the device + * is self powered or not + * @gadget: Reference to the gadget driver + * @value: Specifies self powered or not + * + * Return codes: + * 0: Success + * -EINVAL: If the gadget passed is NULL + */ +static int pch_udc_pcd_selfpowered(struct usb_gadget *gadget, int value) +{ + struct pch_udc_dev *dev; + + if (!gadget) + return -EINVAL; + gadget->is_selfpowered = (value != 0); + dev = container_of(gadget, struct pch_udc_dev, gadget); + if (value) + pch_udc_set_selfpowered(dev); + else + pch_udc_clear_selfpowered(dev); + return 0; +} + +/** + * pch_udc_pcd_pullup() - This API is invoked to make the device + * visible/invisible to the host + * @gadget: Reference to the gadget driver + * @is_on: Specifies whether the pull up is made active or inactive + * + * Return codes: + * 0: Success + * -EINVAL: If the gadget passed is NULL + */ +static int pch_udc_pcd_pullup(struct usb_gadget *gadget, int is_on) +{ + struct pch_udc_dev *dev; + unsigned long iflags; + + if (!gadget) + return -EINVAL; + + dev = container_of(gadget, struct pch_udc_dev, gadget); + + spin_lock_irqsave(&dev->lock, iflags); + if (is_on) { + pch_udc_reconnect(dev); + } else { + if (dev->driver && dev->driver->disconnect) { + spin_unlock_irqrestore(&dev->lock, iflags); + dev->driver->disconnect(&dev->gadget); + spin_lock_irqsave(&dev->lock, iflags); + } + pch_udc_set_disconnect(dev); + } + spin_unlock_irqrestore(&dev->lock, iflags); + + return 0; +} + +/** + * pch_udc_pcd_vbus_session() - This API is used by a driver for an external + * transceiver (or GPIO) that + * detects a VBUS power session starting/ending + * @gadget: Reference to the gadget driver + * @is_active: specifies whether the session is starting or ending + * + * Return codes: + * 0: Success + * -EINVAL: If the gadget passed is NULL + */ +static int pch_udc_pcd_vbus_session(struct usb_gadget *gadget, int is_active) +{ + struct pch_udc_dev *dev; + + if (!gadget) + return -EINVAL; + dev = container_of(gadget, struct pch_udc_dev, gadget); + pch_udc_vbus_session(dev, is_active); + return 0; +} + +/** + * pch_udc_pcd_vbus_draw() - This API is used by gadget drivers during + * SET_CONFIGURATION calls to + * specify how much power the device can consume + * @gadget: Reference to the gadget driver + * @mA: specifies the current limit in 2mA unit + * + * Return codes: + * -EINVAL: If the gadget passed is NULL + * -EOPNOTSUPP: + */ +static int pch_udc_pcd_vbus_draw(struct usb_gadget *gadget, unsigned int mA) +{ + return -EOPNOTSUPP; +} + +static int pch_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver); +static int pch_udc_stop(struct usb_gadget *g); + +static const struct usb_gadget_ops pch_udc_ops = { + .get_frame = pch_udc_pcd_get_frame, + .wakeup = pch_udc_pcd_wakeup, + .set_selfpowered = pch_udc_pcd_selfpowered, + .pullup = pch_udc_pcd_pullup, + .vbus_session = pch_udc_pcd_vbus_session, + .vbus_draw = pch_udc_pcd_vbus_draw, + .udc_start = pch_udc_start, + .udc_stop = pch_udc_stop, +}; + +/** + * pch_vbus_gpio_get_value() - This API gets value of GPIO port as VBUS status. + * @dev: Reference to the driver structure + * + * Return value: + * 1: VBUS is high + * 0: VBUS is low + * -1: It is not enable to detect VBUS using GPIO + */ +static int pch_vbus_gpio_get_value(struct pch_udc_dev *dev) +{ + int vbus = 0; + + if (dev->vbus_gpio.port) + vbus = gpiod_get_value(dev->vbus_gpio.port) ? 1 : 0; + else + vbus = -1; + + return vbus; +} + +/** + * pch_vbus_gpio_work_fall() - This API keeps watch on VBUS becoming Low. + * If VBUS is Low, disconnect is processed + * @irq_work: Structure for WorkQueue + * + */ +static void pch_vbus_gpio_work_fall(struct work_struct *irq_work) +{ + struct pch_vbus_gpio_data *vbus_gpio = container_of(irq_work, + struct pch_vbus_gpio_data, irq_work_fall); + struct pch_udc_dev *dev = + container_of(vbus_gpio, struct pch_udc_dev, vbus_gpio); + int vbus_saved = -1; + int vbus; + int count; + + if (!dev->vbus_gpio.port) + return; + + for (count = 0; count < (PCH_VBUS_PERIOD / PCH_VBUS_INTERVAL); + count++) { + vbus = pch_vbus_gpio_get_value(dev); + + if ((vbus_saved == vbus) && (vbus == 0)) { + dev_dbg(&dev->pdev->dev, "VBUS fell"); + if (dev->driver + && dev->driver->disconnect) { + dev->driver->disconnect( + &dev->gadget); + } + if (dev->vbus_gpio.intr) + pch_udc_init(dev); + else + pch_udc_reconnect(dev); + return; + } + vbus_saved = vbus; + mdelay(PCH_VBUS_INTERVAL); + } +} + +/** + * pch_vbus_gpio_work_rise() - This API checks VBUS is High. + * If VBUS is High, connect is processed + * @irq_work: Structure for WorkQueue + * + */ +static void pch_vbus_gpio_work_rise(struct work_struct *irq_work) +{ + struct pch_vbus_gpio_data *vbus_gpio = container_of(irq_work, + struct pch_vbus_gpio_data, irq_work_rise); + struct pch_udc_dev *dev = + container_of(vbus_gpio, struct pch_udc_dev, vbus_gpio); + int vbus; + + if (!dev->vbus_gpio.port) + return; + + mdelay(PCH_VBUS_INTERVAL); + vbus = pch_vbus_gpio_get_value(dev); + + if (vbus == 1) { + dev_dbg(&dev->pdev->dev, "VBUS rose"); + pch_udc_reconnect(dev); + return; + } +} + +/** + * pch_vbus_gpio_irq() - IRQ handler for GPIO interrupt for changing VBUS + * @irq: Interrupt request number + * @data: Reference to the device structure + * + * Return codes: + * 0: Success + * -EINVAL: GPIO port is invalid or can't be initialized. + */ +static irqreturn_t pch_vbus_gpio_irq(int irq, void *data) +{ + struct pch_udc_dev *dev = (struct pch_udc_dev *)data; + + if (!dev->vbus_gpio.port || !dev->vbus_gpio.intr) + return IRQ_NONE; + + if (pch_vbus_gpio_get_value(dev)) + schedule_work(&dev->vbus_gpio.irq_work_rise); + else + schedule_work(&dev->vbus_gpio.irq_work_fall); + + return IRQ_HANDLED; +} + +/** + * pch_vbus_gpio_init() - This API initializes GPIO port detecting VBUS. + * @dev: Reference to the driver structure + * + * Return codes: + * 0: Success + * -EINVAL: GPIO port is invalid or can't be initialized. + */ +static int pch_vbus_gpio_init(struct pch_udc_dev *dev) +{ + struct device *d = &dev->pdev->dev; + int err; + int irq_num = 0; + struct gpio_desc *gpiod; + + dev->vbus_gpio.port = NULL; + dev->vbus_gpio.intr = 0; + + /* Retrieve the GPIO line from the USB gadget device */ + gpiod = devm_gpiod_get_optional(d, NULL, GPIOD_IN); + if (IS_ERR(gpiod)) + return PTR_ERR(gpiod); + gpiod_set_consumer_name(gpiod, "pch_vbus"); + + dev->vbus_gpio.port = gpiod; + INIT_WORK(&dev->vbus_gpio.irq_work_fall, pch_vbus_gpio_work_fall); + + irq_num = gpiod_to_irq(gpiod); + if (irq_num > 0) { + irq_set_irq_type(irq_num, IRQ_TYPE_EDGE_BOTH); + err = request_irq(irq_num, pch_vbus_gpio_irq, 0, + "vbus_detect", dev); + if (!err) { + dev->vbus_gpio.intr = irq_num; + INIT_WORK(&dev->vbus_gpio.irq_work_rise, + pch_vbus_gpio_work_rise); + } else { + pr_err("%s: can't request irq %d, err: %d\n", + __func__, irq_num, err); + } + } + + return 0; +} + +/** + * pch_vbus_gpio_free() - This API frees resources of GPIO port + * @dev: Reference to the driver structure + */ +static void pch_vbus_gpio_free(struct pch_udc_dev *dev) +{ + if (dev->vbus_gpio.intr) + free_irq(dev->vbus_gpio.intr, dev); +} + +/** + * complete_req() - This API is invoked from the driver when processing + * of a request is complete + * @ep: Reference to the endpoint structure + * @req: Reference to the request structure + * @status: Indicates the success/failure of completion + */ +static void complete_req(struct pch_udc_ep *ep, struct pch_udc_request *req, + int status) + __releases(&dev->lock) + __acquires(&dev->lock) +{ + struct pch_udc_dev *dev; + unsigned halted = ep->halted; + + list_del_init(&req->queue); + + /* set new status if pending */ + if (req->req.status == -EINPROGRESS) + req->req.status = status; + else + status = req->req.status; + + dev = ep->dev; + usb_gadget_unmap_request(&dev->gadget, &req->req, ep->in); + ep->halted = 1; + spin_unlock(&dev->lock); + if (!ep->in) + pch_udc_ep_clear_rrdy(ep); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&dev->lock); + ep->halted = halted; +} + +/** + * empty_req_queue() - This API empties the request queue of an endpoint + * @ep: Reference to the endpoint structure + */ +static void empty_req_queue(struct pch_udc_ep *ep) +{ + struct pch_udc_request *req; + + ep->halted = 1; + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct pch_udc_request, queue); + complete_req(ep, req, -ESHUTDOWN); /* Remove from list */ + } +} + +/** + * pch_udc_free_dma_chain() - This function frees the DMA chain created + * for the request + * @dev: Reference to the driver structure + * @req: Reference to the request to be freed + * + * Return codes: + * 0: Success + */ +static void pch_udc_free_dma_chain(struct pch_udc_dev *dev, + struct pch_udc_request *req) +{ + struct pch_udc_data_dma_desc *td = req->td_data; + unsigned i = req->chain_len; + + dma_addr_t addr2; + dma_addr_t addr = (dma_addr_t)td->next; + td->next = 0x00; + for (; i > 1; --i) { + /* do not free first desc., will be done by free for request */ + td = phys_to_virt(addr); + addr2 = (dma_addr_t)td->next; + dma_pool_free(dev->data_requests, td, addr); + addr = addr2; + } + req->chain_len = 1; +} + +/** + * pch_udc_create_dma_chain() - This function creates or reinitializes + * a DMA chain + * @ep: Reference to the endpoint structure + * @req: Reference to the request + * @buf_len: The buffer length + * @gfp_flags: Flags to be used while mapping the data buffer + * + * Return codes: + * 0: success, + * -ENOMEM: dma_pool_alloc invocation fails + */ +static int pch_udc_create_dma_chain(struct pch_udc_ep *ep, + struct pch_udc_request *req, + unsigned long buf_len, + gfp_t gfp_flags) +{ + struct pch_udc_data_dma_desc *td = req->td_data, *last; + unsigned long bytes = req->req.length, i = 0; + dma_addr_t dma_addr; + unsigned len = 1; + + if (req->chain_len > 1) + pch_udc_free_dma_chain(ep->dev, req); + + td->dataptr = req->req.dma; + td->status = PCH_UDC_BS_HST_BSY; + + for (; ; bytes -= buf_len, ++len) { + td->status = PCH_UDC_BS_HST_BSY | min(buf_len, bytes); + if (bytes <= buf_len) + break; + last = td; + td = dma_pool_alloc(ep->dev->data_requests, gfp_flags, + &dma_addr); + if (!td) + goto nomem; + i += buf_len; + td->dataptr = req->td_data->dataptr + i; + last->next = dma_addr; + } + + req->td_data_last = td; + td->status |= PCH_UDC_DMA_LAST; + td->next = req->td_data_phys; + req->chain_len = len; + return 0; + +nomem: + if (len > 1) { + req->chain_len = len; + pch_udc_free_dma_chain(ep->dev, req); + } + req->chain_len = 1; + return -ENOMEM; +} + +/** + * prepare_dma() - This function creates and initializes the DMA chain + * for the request + * @ep: Reference to the endpoint structure + * @req: Reference to the request + * @gfp: Flag to be used while mapping the data buffer + * + * Return codes: + * 0: Success + * Other 0: linux error number on failure + */ +static int prepare_dma(struct pch_udc_ep *ep, struct pch_udc_request *req, + gfp_t gfp) +{ + int retval; + + /* Allocate and create a DMA chain */ + retval = pch_udc_create_dma_chain(ep, req, ep->ep.maxpacket, gfp); + if (retval) { + pr_err("%s: could not create DMA chain:%d\n", __func__, retval); + return retval; + } + if (ep->in) + req->td_data->status = (req->td_data->status & + ~PCH_UDC_BUFF_STS) | PCH_UDC_BS_HST_RDY; + return 0; +} + +/** + * process_zlp() - This function process zero length packets + * from the gadget driver + * @ep: Reference to the endpoint structure + * @req: Reference to the request + */ +static void process_zlp(struct pch_udc_ep *ep, struct pch_udc_request *req) +{ + struct pch_udc_dev *dev = ep->dev; + + /* IN zlp's are handled by hardware */ + complete_req(ep, req, 0); + + /* if set_config or set_intf is waiting for ack by zlp + * then set CSR_DONE + */ + if (dev->set_cfg_not_acked) { + pch_udc_set_csr_done(dev); + dev->set_cfg_not_acked = 0; + } + /* setup command is ACK'ed now by zlp */ + if (!dev->stall && dev->waiting_zlp_ack) { + pch_udc_ep_clear_nak(&(dev->ep[UDC_EP0IN_IDX])); + dev->waiting_zlp_ack = 0; + } +} + +/** + * pch_udc_start_rxrequest() - This function starts the receive requirement. + * @ep: Reference to the endpoint structure + * @req: Reference to the request structure + */ +static void pch_udc_start_rxrequest(struct pch_udc_ep *ep, + struct pch_udc_request *req) +{ + struct pch_udc_data_dma_desc *td_data; + + pch_udc_clear_dma(ep->dev, DMA_DIR_RX); + td_data = req->td_data; + /* Set the status bits for all descriptors */ + while (1) { + td_data->status = (td_data->status & ~PCH_UDC_BUFF_STS) | + PCH_UDC_BS_HST_RDY; + if ((td_data->status & PCH_UDC_DMA_LAST) == PCH_UDC_DMA_LAST) + break; + td_data = phys_to_virt(td_data->next); + } + /* Write the descriptor pointer */ + pch_udc_ep_set_ddptr(ep, req->td_data_phys); + req->dma_going = 1; + pch_udc_enable_ep_interrupts(ep->dev, UDC_EPINT_OUT_EP0 << ep->num); + pch_udc_set_dma(ep->dev, DMA_DIR_RX); + pch_udc_ep_clear_nak(ep); + pch_udc_ep_set_rrdy(ep); +} + +/** + * pch_udc_pcd_ep_enable() - This API enables the endpoint. It is called + * from gadget driver + * @usbep: Reference to the USB endpoint structure + * @desc: Reference to the USB endpoint descriptor structure + * + * Return codes: + * 0: Success + * -EINVAL: + * -ESHUTDOWN: + */ +static int pch_udc_pcd_ep_enable(struct usb_ep *usbep, + const struct usb_endpoint_descriptor *desc) +{ + struct pch_udc_ep *ep; + struct pch_udc_dev *dev; + unsigned long iflags; + + if (!usbep || (usbep->name == ep0_string) || !desc || + (desc->bDescriptorType != USB_DT_ENDPOINT) || !desc->wMaxPacketSize) + return -EINVAL; + + ep = container_of(usbep, struct pch_udc_ep, ep); + dev = ep->dev; + if (!dev->driver || (dev->gadget.speed == USB_SPEED_UNKNOWN)) + return -ESHUTDOWN; + spin_lock_irqsave(&dev->lock, iflags); + ep->ep.desc = desc; + ep->halted = 0; + pch_udc_ep_enable(ep, &ep->dev->cfg_data, desc); + ep->ep.maxpacket = usb_endpoint_maxp(desc); + pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num)); + spin_unlock_irqrestore(&dev->lock, iflags); + return 0; +} + +/** + * pch_udc_pcd_ep_disable() - This API disables endpoint and is called + * from gadget driver + * @usbep: Reference to the USB endpoint structure + * + * Return codes: + * 0: Success + * -EINVAL: + */ +static int pch_udc_pcd_ep_disable(struct usb_ep *usbep) +{ + struct pch_udc_ep *ep; + unsigned long iflags; + + if (!usbep) + return -EINVAL; + + ep = container_of(usbep, struct pch_udc_ep, ep); + if ((usbep->name == ep0_string) || !ep->ep.desc) + return -EINVAL; + + spin_lock_irqsave(&ep->dev->lock, iflags); + empty_req_queue(ep); + ep->halted = 1; + pch_udc_ep_disable(ep); + pch_udc_disable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num)); + ep->ep.desc = NULL; + INIT_LIST_HEAD(&ep->queue); + spin_unlock_irqrestore(&ep->dev->lock, iflags); + return 0; +} + +/** + * pch_udc_alloc_request() - This function allocates request structure. + * It is called by gadget driver + * @usbep: Reference to the USB endpoint structure + * @gfp: Flag to be used while allocating memory + * + * Return codes: + * NULL: Failure + * Allocated address: Success + */ +static struct usb_request *pch_udc_alloc_request(struct usb_ep *usbep, + gfp_t gfp) +{ + struct pch_udc_request *req; + struct pch_udc_ep *ep; + struct pch_udc_data_dma_desc *dma_desc; + + if (!usbep) + return NULL; + ep = container_of(usbep, struct pch_udc_ep, ep); + req = kzalloc(sizeof *req, gfp); + if (!req) + return NULL; + req->req.dma = DMA_ADDR_INVALID; + INIT_LIST_HEAD(&req->queue); + if (!ep->dev->dma_addr) + return &req->req; + /* ep0 in requests are allocated from data pool here */ + dma_desc = dma_pool_alloc(ep->dev->data_requests, gfp, + &req->td_data_phys); + if (NULL == dma_desc) { + kfree(req); + return NULL; + } + /* prevent from using desc. - set HOST BUSY */ + dma_desc->status |= PCH_UDC_BS_HST_BSY; + dma_desc->dataptr = lower_32_bits(DMA_ADDR_INVALID); + req->td_data = dma_desc; + req->td_data_last = dma_desc; + req->chain_len = 1; + return &req->req; +} + +/** + * pch_udc_free_request() - This function frees request structure. + * It is called by gadget driver + * @usbep: Reference to the USB endpoint structure + * @usbreq: Reference to the USB request + */ +static void pch_udc_free_request(struct usb_ep *usbep, + struct usb_request *usbreq) +{ + struct pch_udc_ep *ep; + struct pch_udc_request *req; + struct pch_udc_dev *dev; + + if (!usbep || !usbreq) + return; + ep = container_of(usbep, struct pch_udc_ep, ep); + req = container_of(usbreq, struct pch_udc_request, req); + dev = ep->dev; + if (!list_empty(&req->queue)) + dev_err(&dev->pdev->dev, "%s: %s req=0x%p queue not empty\n", + __func__, usbep->name, req); + if (req->td_data != NULL) { + if (req->chain_len > 1) + pch_udc_free_dma_chain(ep->dev, req); + dma_pool_free(ep->dev->data_requests, req->td_data, + req->td_data_phys); + } + kfree(req); +} + +/** + * pch_udc_pcd_queue() - This function queues a request packet. It is called + * by gadget driver + * @usbep: Reference to the USB endpoint structure + * @usbreq: Reference to the USB request + * @gfp: Flag to be used while mapping the data buffer + * + * Return codes: + * 0: Success + * linux error number: Failure + */ +static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq, + gfp_t gfp) +{ + int retval = 0; + struct pch_udc_ep *ep; + struct pch_udc_dev *dev; + struct pch_udc_request *req; + unsigned long iflags; + + if (!usbep || !usbreq || !usbreq->complete || !usbreq->buf) + return -EINVAL; + ep = container_of(usbep, struct pch_udc_ep, ep); + dev = ep->dev; + if (!ep->ep.desc && ep->num) + return -EINVAL; + req = container_of(usbreq, struct pch_udc_request, req); + if (!list_empty(&req->queue)) + return -EINVAL; + if (!dev->driver || (dev->gadget.speed == USB_SPEED_UNKNOWN)) + return -ESHUTDOWN; + spin_lock_irqsave(&dev->lock, iflags); + /* map the buffer for dma */ + retval = usb_gadget_map_request(&dev->gadget, usbreq, ep->in); + if (retval) + goto probe_end; + if (usbreq->length > 0) { + retval = prepare_dma(ep, req, GFP_ATOMIC); + if (retval) + goto probe_end; + } + usbreq->actual = 0; + usbreq->status = -EINPROGRESS; + req->dma_done = 0; + if (list_empty(&ep->queue) && !ep->halted) { + /* no pending transfer, so start this req */ + if (!usbreq->length) { + process_zlp(ep, req); + retval = 0; + goto probe_end; + } + if (!ep->in) { + pch_udc_start_rxrequest(ep, req); + } else { + /* + * For IN trfr the descriptors will be programmed and + * P bit will be set when + * we get an IN token + */ + pch_udc_wait_ep_stall(ep); + pch_udc_ep_clear_nak(ep); + pch_udc_enable_ep_interrupts(ep->dev, (1 << ep->num)); + } + } + /* Now add this request to the ep's pending requests */ + if (req != NULL) + list_add_tail(&req->queue, &ep->queue); + +probe_end: + spin_unlock_irqrestore(&dev->lock, iflags); + return retval; +} + +/** + * pch_udc_pcd_dequeue() - This function de-queues a request packet. + * It is called by gadget driver + * @usbep: Reference to the USB endpoint structure + * @usbreq: Reference to the USB request + * + * Return codes: + * 0: Success + * linux error number: Failure + */ +static int pch_udc_pcd_dequeue(struct usb_ep *usbep, + struct usb_request *usbreq) +{ + struct pch_udc_ep *ep; + struct pch_udc_request *req; + unsigned long flags; + int ret = -EINVAL; + + ep = container_of(usbep, struct pch_udc_ep, ep); + if (!usbep || !usbreq || (!ep->ep.desc && ep->num)) + return ret; + req = container_of(usbreq, struct pch_udc_request, req); + spin_lock_irqsave(&ep->dev->lock, flags); + /* make sure it's still queued on this endpoint */ + list_for_each_entry(req, &ep->queue, queue) { + if (&req->req == usbreq) { + pch_udc_ep_set_nak(ep); + if (!list_empty(&req->queue)) + complete_req(ep, req, -ECONNRESET); + ret = 0; + break; + } + } + spin_unlock_irqrestore(&ep->dev->lock, flags); + return ret; +} + +/** + * pch_udc_pcd_set_halt() - This function Sets or clear the endpoint halt + * feature + * @usbep: Reference to the USB endpoint structure + * @halt: Specifies whether to set or clear the feature + * + * Return codes: + * 0: Success + * linux error number: Failure + */ +static int pch_udc_pcd_set_halt(struct usb_ep *usbep, int halt) +{ + struct pch_udc_ep *ep; + unsigned long iflags; + int ret; + + if (!usbep) + return -EINVAL; + ep = container_of(usbep, struct pch_udc_ep, ep); + if (!ep->ep.desc && !ep->num) + return -EINVAL; + if (!ep->dev->driver || (ep->dev->gadget.speed == USB_SPEED_UNKNOWN)) + return -ESHUTDOWN; + spin_lock_irqsave(&udc_stall_spinlock, iflags); + if (list_empty(&ep->queue)) { + if (halt) { + if (ep->num == PCH_UDC_EP0) + ep->dev->stall = 1; + pch_udc_ep_set_stall(ep); + pch_udc_enable_ep_interrupts( + ep->dev, PCH_UDC_EPINT(ep->in, ep->num)); + } else { + pch_udc_ep_clear_stall(ep); + } + ret = 0; + } else { + ret = -EAGAIN; + } + spin_unlock_irqrestore(&udc_stall_spinlock, iflags); + return ret; +} + +/** + * pch_udc_pcd_set_wedge() - This function Sets or clear the endpoint + * halt feature + * @usbep: Reference to the USB endpoint structure + * + * Return codes: + * 0: Success + * linux error number: Failure + */ +static int pch_udc_pcd_set_wedge(struct usb_ep *usbep) +{ + struct pch_udc_ep *ep; + unsigned long iflags; + int ret; + + if (!usbep) + return -EINVAL; + ep = container_of(usbep, struct pch_udc_ep, ep); + if (!ep->ep.desc && !ep->num) + return -EINVAL; + if (!ep->dev->driver || (ep->dev->gadget.speed == USB_SPEED_UNKNOWN)) + return -ESHUTDOWN; + spin_lock_irqsave(&udc_stall_spinlock, iflags); + if (!list_empty(&ep->queue)) { + ret = -EAGAIN; + } else { + if (ep->num == PCH_UDC_EP0) + ep->dev->stall = 1; + pch_udc_ep_set_stall(ep); + pch_udc_enable_ep_interrupts(ep->dev, + PCH_UDC_EPINT(ep->in, ep->num)); + ep->dev->prot_stall = 1; + ret = 0; + } + spin_unlock_irqrestore(&udc_stall_spinlock, iflags); + return ret; +} + +/** + * pch_udc_pcd_fifo_flush() - This function Flush the FIFO of specified endpoint + * @usbep: Reference to the USB endpoint structure + */ +static void pch_udc_pcd_fifo_flush(struct usb_ep *usbep) +{ + struct pch_udc_ep *ep; + + if (!usbep) + return; + + ep = container_of(usbep, struct pch_udc_ep, ep); + if (ep->ep.desc || !ep->num) + pch_udc_ep_fifo_flush(ep, ep->in); +} + +static const struct usb_ep_ops pch_udc_ep_ops = { + .enable = pch_udc_pcd_ep_enable, + .disable = pch_udc_pcd_ep_disable, + .alloc_request = pch_udc_alloc_request, + .free_request = pch_udc_free_request, + .queue = pch_udc_pcd_queue, + .dequeue = pch_udc_pcd_dequeue, + .set_halt = pch_udc_pcd_set_halt, + .set_wedge = pch_udc_pcd_set_wedge, + .fifo_status = NULL, + .fifo_flush = pch_udc_pcd_fifo_flush, +}; + +/** + * pch_udc_init_setup_buff() - This function initializes the SETUP buffer + * @td_stp: Reference to the SETP buffer structure + */ +static void pch_udc_init_setup_buff(struct pch_udc_stp_dma_desc *td_stp) +{ + static u32 pky_marker; + + if (!td_stp) + return; + td_stp->reserved = ++pky_marker; + memset(&td_stp->request, 0xFF, sizeof td_stp->request); + td_stp->status = PCH_UDC_BS_HST_RDY; +} + +/** + * pch_udc_start_next_txrequest() - This function starts + * the next transmission requirement + * @ep: Reference to the endpoint structure + */ +static void pch_udc_start_next_txrequest(struct pch_udc_ep *ep) +{ + struct pch_udc_request *req; + struct pch_udc_data_dma_desc *td_data; + + if (pch_udc_read_ep_control(ep) & UDC_EPCTL_P) + return; + + if (list_empty(&ep->queue)) + return; + + /* next request */ + req = list_entry(ep->queue.next, struct pch_udc_request, queue); + if (req->dma_going) + return; + if (!req->td_data) + return; + pch_udc_wait_ep_stall(ep); + req->dma_going = 1; + pch_udc_ep_set_ddptr(ep, 0); + td_data = req->td_data; + while (1) { + td_data->status = (td_data->status & ~PCH_UDC_BUFF_STS) | + PCH_UDC_BS_HST_RDY; + if ((td_data->status & PCH_UDC_DMA_LAST) == PCH_UDC_DMA_LAST) + break; + td_data = phys_to_virt(td_data->next); + } + pch_udc_ep_set_ddptr(ep, req->td_data_phys); + pch_udc_set_dma(ep->dev, DMA_DIR_TX); + pch_udc_ep_set_pd(ep); + pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num)); + pch_udc_ep_clear_nak(ep); +} + +/** + * pch_udc_complete_transfer() - This function completes a transfer + * @ep: Reference to the endpoint structure + */ +static void pch_udc_complete_transfer(struct pch_udc_ep *ep) +{ + struct pch_udc_request *req; + struct pch_udc_dev *dev = ep->dev; + + if (list_empty(&ep->queue)) + return; + req = list_entry(ep->queue.next, struct pch_udc_request, queue); + if ((req->td_data_last->status & PCH_UDC_BUFF_STS) != + PCH_UDC_BS_DMA_DONE) + return; + if ((req->td_data_last->status & PCH_UDC_RXTX_STS) != + PCH_UDC_RTS_SUCC) { + dev_err(&dev->pdev->dev, "Invalid RXTX status (0x%08x) " + "epstatus=0x%08x\n", + (req->td_data_last->status & PCH_UDC_RXTX_STS), + (int)(ep->epsts)); + return; + } + + req->req.actual = req->req.length; + req->td_data_last->status = PCH_UDC_BS_HST_BSY | PCH_UDC_DMA_LAST; + req->td_data->status = PCH_UDC_BS_HST_BSY | PCH_UDC_DMA_LAST; + complete_req(ep, req, 0); + req->dma_going = 0; + if (!list_empty(&ep->queue)) { + pch_udc_wait_ep_stall(ep); + pch_udc_ep_clear_nak(ep); + pch_udc_enable_ep_interrupts(ep->dev, + PCH_UDC_EPINT(ep->in, ep->num)); + } else { + pch_udc_disable_ep_interrupts(ep->dev, + PCH_UDC_EPINT(ep->in, ep->num)); + } +} + +/** + * pch_udc_complete_receiver() - This function completes a receiver + * @ep: Reference to the endpoint structure + */ +static void pch_udc_complete_receiver(struct pch_udc_ep *ep) +{ + struct pch_udc_request *req; + struct pch_udc_dev *dev = ep->dev; + unsigned int count; + struct pch_udc_data_dma_desc *td; + dma_addr_t addr; + + if (list_empty(&ep->queue)) + return; + /* next request */ + req = list_entry(ep->queue.next, struct pch_udc_request, queue); + pch_udc_clear_dma(ep->dev, DMA_DIR_RX); + pch_udc_ep_set_ddptr(ep, 0); + if ((req->td_data_last->status & PCH_UDC_BUFF_STS) == + PCH_UDC_BS_DMA_DONE) + td = req->td_data_last; + else + td = req->td_data; + + while (1) { + if ((td->status & PCH_UDC_RXTX_STS) != PCH_UDC_RTS_SUCC) { + dev_err(&dev->pdev->dev, "Invalid RXTX status=0x%08x " + "epstatus=0x%08x\n", + (req->td_data->status & PCH_UDC_RXTX_STS), + (int)(ep->epsts)); + return; + } + if ((td->status & PCH_UDC_BUFF_STS) == PCH_UDC_BS_DMA_DONE) + if (td->status & PCH_UDC_DMA_LAST) { + count = td->status & PCH_UDC_RXTX_BYTES; + break; + } + if (td == req->td_data_last) { + dev_err(&dev->pdev->dev, "Not complete RX descriptor"); + return; + } + addr = (dma_addr_t)td->next; + td = phys_to_virt(addr); + } + /* on 64k packets the RXBYTES field is zero */ + if (!count && (req->req.length == UDC_DMA_MAXPACKET)) + count = UDC_DMA_MAXPACKET; + req->td_data->status |= PCH_UDC_DMA_LAST; + td->status |= PCH_UDC_BS_HST_BSY; + + req->dma_going = 0; + req->req.actual = count; + complete_req(ep, req, 0); + /* If there is a new/failed requests try that now */ + if (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct pch_udc_request, queue); + pch_udc_start_rxrequest(ep, req); + } +} + +/** + * pch_udc_svc_data_in() - This function process endpoint interrupts + * for IN endpoints + * @dev: Reference to the device structure + * @ep_num: Endpoint that generated the interrupt + */ +static void pch_udc_svc_data_in(struct pch_udc_dev *dev, int ep_num) +{ + u32 epsts; + struct pch_udc_ep *ep; + + ep = &dev->ep[UDC_EPIN_IDX(ep_num)]; + epsts = ep->epsts; + ep->epsts = 0; + + if (!(epsts & (UDC_EPSTS_IN | UDC_EPSTS_BNA | UDC_EPSTS_HE | + UDC_EPSTS_TDC | UDC_EPSTS_RCS | UDC_EPSTS_TXEMPTY | + UDC_EPSTS_RSS | UDC_EPSTS_XFERDONE))) + return; + if ((epsts & UDC_EPSTS_BNA)) + return; + if (epsts & UDC_EPSTS_HE) + return; + if (epsts & UDC_EPSTS_RSS) { + pch_udc_ep_set_stall(ep); + pch_udc_enable_ep_interrupts(ep->dev, + PCH_UDC_EPINT(ep->in, ep->num)); + } + if (epsts & UDC_EPSTS_RCS) { + if (!dev->prot_stall) { + pch_udc_ep_clear_stall(ep); + } else { + pch_udc_ep_set_stall(ep); + pch_udc_enable_ep_interrupts(ep->dev, + PCH_UDC_EPINT(ep->in, ep->num)); + } + } + if (epsts & UDC_EPSTS_TDC) + pch_udc_complete_transfer(ep); + /* On IN interrupt, provide data if we have any */ + if ((epsts & UDC_EPSTS_IN) && !(epsts & UDC_EPSTS_RSS) && + !(epsts & UDC_EPSTS_TDC) && !(epsts & UDC_EPSTS_TXEMPTY)) + pch_udc_start_next_txrequest(ep); +} + +/** + * pch_udc_svc_data_out() - Handles interrupts from OUT endpoint + * @dev: Reference to the device structure + * @ep_num: Endpoint that generated the interrupt + */ +static void pch_udc_svc_data_out(struct pch_udc_dev *dev, int ep_num) +{ + u32 epsts; + struct pch_udc_ep *ep; + struct pch_udc_request *req = NULL; + + ep = &dev->ep[UDC_EPOUT_IDX(ep_num)]; + epsts = ep->epsts; + ep->epsts = 0; + + if ((epsts & UDC_EPSTS_BNA) && (!list_empty(&ep->queue))) { + /* next request */ + req = list_entry(ep->queue.next, struct pch_udc_request, + queue); + if ((req->td_data_last->status & PCH_UDC_BUFF_STS) != + PCH_UDC_BS_DMA_DONE) { + if (!req->dma_going) + pch_udc_start_rxrequest(ep, req); + return; + } + } + if (epsts & UDC_EPSTS_HE) + return; + if (epsts & UDC_EPSTS_RSS) { + pch_udc_ep_set_stall(ep); + pch_udc_enable_ep_interrupts(ep->dev, + PCH_UDC_EPINT(ep->in, ep->num)); + } + if (epsts & UDC_EPSTS_RCS) { + if (!dev->prot_stall) { + pch_udc_ep_clear_stall(ep); + } else { + pch_udc_ep_set_stall(ep); + pch_udc_enable_ep_interrupts(ep->dev, + PCH_UDC_EPINT(ep->in, ep->num)); + } + } + if (((epsts & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) == + UDC_EPSTS_OUT_DATA) { + if (ep->dev->prot_stall == 1) { + pch_udc_ep_set_stall(ep); + pch_udc_enable_ep_interrupts(ep->dev, + PCH_UDC_EPINT(ep->in, ep->num)); + } else { + pch_udc_complete_receiver(ep); + } + } + if (list_empty(&ep->queue)) + pch_udc_set_dma(dev, DMA_DIR_RX); +} + +static int pch_udc_gadget_setup(struct pch_udc_dev *dev) + __must_hold(&dev->lock) +{ + int rc; + + /* In some cases we can get an interrupt before driver gets setup */ + if (!dev->driver) + return -ESHUTDOWN; + + spin_unlock(&dev->lock); + rc = dev->driver->setup(&dev->gadget, &dev->setup_data); + spin_lock(&dev->lock); + return rc; +} + +/** + * pch_udc_svc_control_in() - Handle Control IN endpoint interrupts + * @dev: Reference to the device structure + */ +static void pch_udc_svc_control_in(struct pch_udc_dev *dev) +{ + u32 epsts; + struct pch_udc_ep *ep; + struct pch_udc_ep *ep_out; + + ep = &dev->ep[UDC_EP0IN_IDX]; + ep_out = &dev->ep[UDC_EP0OUT_IDX]; + epsts = ep->epsts; + ep->epsts = 0; + + if (!(epsts & (UDC_EPSTS_IN | UDC_EPSTS_BNA | UDC_EPSTS_HE | + UDC_EPSTS_TDC | UDC_EPSTS_RCS | UDC_EPSTS_TXEMPTY | + UDC_EPSTS_XFERDONE))) + return; + if ((epsts & UDC_EPSTS_BNA)) + return; + if (epsts & UDC_EPSTS_HE) + return; + if ((epsts & UDC_EPSTS_TDC) && (!dev->stall)) { + pch_udc_complete_transfer(ep); + pch_udc_clear_dma(dev, DMA_DIR_RX); + ep_out->td_data->status = (ep_out->td_data->status & + ~PCH_UDC_BUFF_STS) | + PCH_UDC_BS_HST_RDY; + pch_udc_ep_clear_nak(ep_out); + pch_udc_set_dma(dev, DMA_DIR_RX); + pch_udc_ep_set_rrdy(ep_out); + } + /* On IN interrupt, provide data if we have any */ + if ((epsts & UDC_EPSTS_IN) && !(epsts & UDC_EPSTS_TDC) && + !(epsts & UDC_EPSTS_TXEMPTY)) + pch_udc_start_next_txrequest(ep); +} + +/** + * pch_udc_svc_control_out() - Routine that handle Control + * OUT endpoint interrupts + * @dev: Reference to the device structure + */ +static void pch_udc_svc_control_out(struct pch_udc_dev *dev) + __releases(&dev->lock) + __acquires(&dev->lock) +{ + u32 stat; + int setup_supported; + struct pch_udc_ep *ep; + + ep = &dev->ep[UDC_EP0OUT_IDX]; + stat = ep->epsts; + ep->epsts = 0; + + /* If setup data */ + if (((stat & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) == + UDC_EPSTS_OUT_SETUP) { + dev->stall = 0; + dev->ep[UDC_EP0IN_IDX].halted = 0; + dev->ep[UDC_EP0OUT_IDX].halted = 0; + dev->setup_data = ep->td_stp->request; + pch_udc_init_setup_buff(ep->td_stp); + pch_udc_clear_dma(dev, DMA_DIR_RX); + pch_udc_ep_fifo_flush(&(dev->ep[UDC_EP0IN_IDX]), + dev->ep[UDC_EP0IN_IDX].in); + if ((dev->setup_data.bRequestType & USB_DIR_IN)) + dev->gadget.ep0 = &dev->ep[UDC_EP0IN_IDX].ep; + else /* OUT */ + dev->gadget.ep0 = &ep->ep; + /* If Mass storage Reset */ + if ((dev->setup_data.bRequestType == 0x21) && + (dev->setup_data.bRequest == 0xFF)) + dev->prot_stall = 0; + /* call gadget with setup data received */ + setup_supported = pch_udc_gadget_setup(dev); + + if (dev->setup_data.bRequestType & USB_DIR_IN) { + ep->td_data->status = (ep->td_data->status & + ~PCH_UDC_BUFF_STS) | + PCH_UDC_BS_HST_RDY; + pch_udc_ep_set_ddptr(ep, ep->td_data_phys); + } + /* ep0 in returns data on IN phase */ + if (setup_supported >= 0 && setup_supported < + UDC_EP0IN_MAX_PKT_SIZE) { + pch_udc_ep_clear_nak(&(dev->ep[UDC_EP0IN_IDX])); + /* Gadget would have queued a request when + * we called the setup */ + if (!(dev->setup_data.bRequestType & USB_DIR_IN)) { + pch_udc_set_dma(dev, DMA_DIR_RX); + pch_udc_ep_clear_nak(ep); + } + } else if (setup_supported < 0) { + /* if unsupported request, then stall */ + pch_udc_ep_set_stall(&(dev->ep[UDC_EP0IN_IDX])); + pch_udc_enable_ep_interrupts(ep->dev, + PCH_UDC_EPINT(ep->in, ep->num)); + dev->stall = 0; + pch_udc_set_dma(dev, DMA_DIR_RX); + } else { + dev->waiting_zlp_ack = 1; + } + } else if ((((stat & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) == + UDC_EPSTS_OUT_DATA) && !dev->stall) { + pch_udc_clear_dma(dev, DMA_DIR_RX); + pch_udc_ep_set_ddptr(ep, 0); + if (!list_empty(&ep->queue)) { + ep->epsts = stat; + pch_udc_svc_data_out(dev, PCH_UDC_EP0); + } + pch_udc_set_dma(dev, DMA_DIR_RX); + } + pch_udc_ep_set_rrdy(ep); +} + + +/** + * pch_udc_postsvc_epinters() - This function enables end point interrupts + * and clears NAK status + * @dev: Reference to the device structure + * @ep_num: End point number + */ +static void pch_udc_postsvc_epinters(struct pch_udc_dev *dev, int ep_num) +{ + struct pch_udc_ep *ep = &dev->ep[UDC_EPIN_IDX(ep_num)]; + if (list_empty(&ep->queue)) + return; + pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num)); + pch_udc_ep_clear_nak(ep); +} + +/** + * pch_udc_read_all_epstatus() - This function read all endpoint status + * @dev: Reference to the device structure + * @ep_intr: Status of endpoint interrupt + */ +static void pch_udc_read_all_epstatus(struct pch_udc_dev *dev, u32 ep_intr) +{ + int i; + struct pch_udc_ep *ep; + + for (i = 0; i < PCH_UDC_USED_EP_NUM; i++) { + /* IN */ + if (ep_intr & (0x1 << i)) { + ep = &dev->ep[UDC_EPIN_IDX(i)]; + ep->epsts = pch_udc_read_ep_status(ep); + pch_udc_clear_ep_status(ep, ep->epsts); + } + /* OUT */ + if (ep_intr & (0x10000 << i)) { + ep = &dev->ep[UDC_EPOUT_IDX(i)]; + ep->epsts = pch_udc_read_ep_status(ep); + pch_udc_clear_ep_status(ep, ep->epsts); + } + } +} + +/** + * pch_udc_activate_control_ep() - This function enables the control endpoints + * for traffic after a reset + * @dev: Reference to the device structure + */ +static void pch_udc_activate_control_ep(struct pch_udc_dev *dev) +{ + struct pch_udc_ep *ep; + u32 val; + + /* Setup the IN endpoint */ + ep = &dev->ep[UDC_EP0IN_IDX]; + pch_udc_clear_ep_control(ep); + pch_udc_ep_fifo_flush(ep, ep->in); + pch_udc_ep_set_bufsz(ep, UDC_EP0IN_BUFF_SIZE, ep->in); + pch_udc_ep_set_maxpkt(ep, UDC_EP0IN_MAX_PKT_SIZE); + /* Initialize the IN EP Descriptor */ + ep->td_data = NULL; + ep->td_stp = NULL; + ep->td_data_phys = 0; + ep->td_stp_phys = 0; + + /* Setup the OUT endpoint */ + ep = &dev->ep[UDC_EP0OUT_IDX]; + pch_udc_clear_ep_control(ep); + pch_udc_ep_fifo_flush(ep, ep->in); + pch_udc_ep_set_bufsz(ep, UDC_EP0OUT_BUFF_SIZE, ep->in); + pch_udc_ep_set_maxpkt(ep, UDC_EP0OUT_MAX_PKT_SIZE); + val = UDC_EP0OUT_MAX_PKT_SIZE << UDC_CSR_NE_MAX_PKT_SHIFT; + pch_udc_write_csr(ep->dev, val, UDC_EP0OUT_IDX); + + /* Initialize the SETUP buffer */ + pch_udc_init_setup_buff(ep->td_stp); + /* Write the pointer address of dma descriptor */ + pch_udc_ep_set_subptr(ep, ep->td_stp_phys); + /* Write the pointer address of Setup descriptor */ + pch_udc_ep_set_ddptr(ep, ep->td_data_phys); + + /* Initialize the dma descriptor */ + ep->td_data->status = PCH_UDC_DMA_LAST; + ep->td_data->dataptr = dev->dma_addr; + ep->td_data->next = ep->td_data_phys; + + pch_udc_ep_clear_nak(ep); +} + + +/** + * pch_udc_svc_ur_interrupt() - This function handles a USB reset interrupt + * @dev: Reference to driver structure + */ +static void pch_udc_svc_ur_interrupt(struct pch_udc_dev *dev) +{ + struct pch_udc_ep *ep; + int i; + + pch_udc_clear_dma(dev, DMA_DIR_TX); + pch_udc_clear_dma(dev, DMA_DIR_RX); + /* Mask all endpoint interrupts */ + pch_udc_disable_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL); + /* clear all endpoint interrupts */ + pch_udc_write_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL); + + for (i = 0; i < PCH_UDC_EP_NUM; i++) { + ep = &dev->ep[i]; + pch_udc_clear_ep_status(ep, UDC_EPSTS_ALL_CLR_MASK); + pch_udc_clear_ep_control(ep); + pch_udc_ep_set_ddptr(ep, 0); + pch_udc_write_csr(ep->dev, 0x00, i); + } + dev->stall = 0; + dev->prot_stall = 0; + dev->waiting_zlp_ack = 0; + dev->set_cfg_not_acked = 0; + + /* disable ep to empty req queue. Skip the control EP's */ + for (i = 0; i < (PCH_UDC_USED_EP_NUM*2); i++) { + ep = &dev->ep[i]; + pch_udc_ep_set_nak(ep); + pch_udc_ep_fifo_flush(ep, ep->in); + /* Complete request queue */ + empty_req_queue(ep); + } + if (dev->driver) { + spin_unlock(&dev->lock); + usb_gadget_udc_reset(&dev->gadget, dev->driver); + spin_lock(&dev->lock); + } +} + +/** + * pch_udc_svc_enum_interrupt() - This function handles a USB speed enumeration + * done interrupt + * @dev: Reference to driver structure + */ +static void pch_udc_svc_enum_interrupt(struct pch_udc_dev *dev) +{ + u32 dev_stat, dev_speed; + u32 speed = USB_SPEED_FULL; + + dev_stat = pch_udc_read_device_status(dev); + dev_speed = (dev_stat & UDC_DEVSTS_ENUM_SPEED_MASK) >> + UDC_DEVSTS_ENUM_SPEED_SHIFT; + switch (dev_speed) { + case UDC_DEVSTS_ENUM_SPEED_HIGH: + speed = USB_SPEED_HIGH; + break; + case UDC_DEVSTS_ENUM_SPEED_FULL: + speed = USB_SPEED_FULL; + break; + case UDC_DEVSTS_ENUM_SPEED_LOW: + speed = USB_SPEED_LOW; + break; + default: + BUG(); + } + dev->gadget.speed = speed; + pch_udc_activate_control_ep(dev); + pch_udc_enable_ep_interrupts(dev, UDC_EPINT_IN_EP0 | UDC_EPINT_OUT_EP0); + pch_udc_set_dma(dev, DMA_DIR_TX); + pch_udc_set_dma(dev, DMA_DIR_RX); + pch_udc_ep_set_rrdy(&(dev->ep[UDC_EP0OUT_IDX])); + + /* enable device interrupts */ + pch_udc_enable_interrupts(dev, UDC_DEVINT_UR | UDC_DEVINT_US | + UDC_DEVINT_ES | UDC_DEVINT_ENUM | + UDC_DEVINT_SI | UDC_DEVINT_SC); +} + +/** + * pch_udc_svc_intf_interrupt() - This function handles a set interface + * interrupt + * @dev: Reference to driver structure + */ +static void pch_udc_svc_intf_interrupt(struct pch_udc_dev *dev) +{ + u32 reg, dev_stat = 0; + int i; + + dev_stat = pch_udc_read_device_status(dev); + dev->cfg_data.cur_intf = (dev_stat & UDC_DEVSTS_INTF_MASK) >> + UDC_DEVSTS_INTF_SHIFT; + dev->cfg_data.cur_alt = (dev_stat & UDC_DEVSTS_ALT_MASK) >> + UDC_DEVSTS_ALT_SHIFT; + dev->set_cfg_not_acked = 1; + /* Construct the usb request for gadget driver and inform it */ + memset(&dev->setup_data, 0 , sizeof dev->setup_data); + dev->setup_data.bRequest = USB_REQ_SET_INTERFACE; + dev->setup_data.bRequestType = USB_RECIP_INTERFACE; + dev->setup_data.wValue = cpu_to_le16(dev->cfg_data.cur_alt); + dev->setup_data.wIndex = cpu_to_le16(dev->cfg_data.cur_intf); + /* programm the Endpoint Cfg registers */ + /* Only one end point cfg register */ + reg = pch_udc_read_csr(dev, UDC_EP0OUT_IDX); + reg = (reg & ~UDC_CSR_NE_INTF_MASK) | + (dev->cfg_data.cur_intf << UDC_CSR_NE_INTF_SHIFT); + reg = (reg & ~UDC_CSR_NE_ALT_MASK) | + (dev->cfg_data.cur_alt << UDC_CSR_NE_ALT_SHIFT); + pch_udc_write_csr(dev, reg, UDC_EP0OUT_IDX); + for (i = 0; i < PCH_UDC_USED_EP_NUM * 2; i++) { + /* clear stall bits */ + pch_udc_ep_clear_stall(&(dev->ep[i])); + dev->ep[i].halted = 0; + } + dev->stall = 0; + pch_udc_gadget_setup(dev); +} + +/** + * pch_udc_svc_cfg_interrupt() - This function handles a set configuration + * interrupt + * @dev: Reference to driver structure + */ +static void pch_udc_svc_cfg_interrupt(struct pch_udc_dev *dev) +{ + int i; + u32 reg, dev_stat = 0; + + dev_stat = pch_udc_read_device_status(dev); + dev->set_cfg_not_acked = 1; + dev->cfg_data.cur_cfg = (dev_stat & UDC_DEVSTS_CFG_MASK) >> + UDC_DEVSTS_CFG_SHIFT; + /* make usb request for gadget driver */ + memset(&dev->setup_data, 0 , sizeof dev->setup_data); + dev->setup_data.bRequest = USB_REQ_SET_CONFIGURATION; + dev->setup_data.wValue = cpu_to_le16(dev->cfg_data.cur_cfg); + /* program the NE registers */ + /* Only one end point cfg register */ + reg = pch_udc_read_csr(dev, UDC_EP0OUT_IDX); + reg = (reg & ~UDC_CSR_NE_CFG_MASK) | + (dev->cfg_data.cur_cfg << UDC_CSR_NE_CFG_SHIFT); + pch_udc_write_csr(dev, reg, UDC_EP0OUT_IDX); + for (i = 0; i < PCH_UDC_USED_EP_NUM * 2; i++) { + /* clear stall bits */ + pch_udc_ep_clear_stall(&(dev->ep[i])); + dev->ep[i].halted = 0; + } + dev->stall = 0; + + /* call gadget zero with setup data received */ + pch_udc_gadget_setup(dev); +} + +/** + * pch_udc_dev_isr() - This function services device interrupts + * by invoking appropriate routines. + * @dev: Reference to the device structure + * @dev_intr: The Device interrupt status. + */ +static void pch_udc_dev_isr(struct pch_udc_dev *dev, u32 dev_intr) +{ + int vbus; + + /* USB Reset Interrupt */ + if (dev_intr & UDC_DEVINT_UR) { + pch_udc_svc_ur_interrupt(dev); + dev_dbg(&dev->pdev->dev, "USB_RESET\n"); + } + /* Enumeration Done Interrupt */ + if (dev_intr & UDC_DEVINT_ENUM) { + pch_udc_svc_enum_interrupt(dev); + dev_dbg(&dev->pdev->dev, "USB_ENUM\n"); + } + /* Set Interface Interrupt */ + if (dev_intr & UDC_DEVINT_SI) + pch_udc_svc_intf_interrupt(dev); + /* Set Config Interrupt */ + if (dev_intr & UDC_DEVINT_SC) + pch_udc_svc_cfg_interrupt(dev); + /* USB Suspend interrupt */ + if (dev_intr & UDC_DEVINT_US) { + if (dev->driver + && dev->driver->suspend) { + spin_unlock(&dev->lock); + dev->driver->suspend(&dev->gadget); + spin_lock(&dev->lock); + } + + vbus = pch_vbus_gpio_get_value(dev); + if ((dev->vbus_session == 0) + && (vbus != 1)) { + if (dev->driver && dev->driver->disconnect) { + spin_unlock(&dev->lock); + dev->driver->disconnect(&dev->gadget); + spin_lock(&dev->lock); + } + pch_udc_reconnect(dev); + } else if ((dev->vbus_session == 0) + && (vbus == 1) + && !dev->vbus_gpio.intr) + schedule_work(&dev->vbus_gpio.irq_work_fall); + + dev_dbg(&dev->pdev->dev, "USB_SUSPEND\n"); + } + /* Clear the SOF interrupt, if enabled */ + if (dev_intr & UDC_DEVINT_SOF) + dev_dbg(&dev->pdev->dev, "SOF\n"); + /* ES interrupt, IDLE > 3ms on the USB */ + if (dev_intr & UDC_DEVINT_ES) + dev_dbg(&dev->pdev->dev, "ES\n"); + /* RWKP interrupt */ + if (dev_intr & UDC_DEVINT_RWKP) + dev_dbg(&dev->pdev->dev, "RWKP\n"); +} + +/** + * pch_udc_isr() - This function handles interrupts from the PCH USB Device + * @irq: Interrupt request number + * @pdev: Reference to the device structure + */ +static irqreturn_t pch_udc_isr(int irq, void *pdev) +{ + struct pch_udc_dev *dev = (struct pch_udc_dev *) pdev; + u32 dev_intr, ep_intr; + int i; + + dev_intr = pch_udc_read_device_interrupts(dev); + ep_intr = pch_udc_read_ep_interrupts(dev); + + /* For a hot plug, this find that the controller is hung up. */ + if (dev_intr == ep_intr) + if (dev_intr == pch_udc_readl(dev, UDC_DEVCFG_ADDR)) { + dev_dbg(&dev->pdev->dev, "UDC: Hung up\n"); + /* The controller is reset */ + pch_udc_writel(dev, UDC_SRST, UDC_SRST_ADDR); + return IRQ_HANDLED; + } + if (dev_intr) + /* Clear device interrupts */ + pch_udc_write_device_interrupts(dev, dev_intr); + if (ep_intr) + /* Clear ep interrupts */ + pch_udc_write_ep_interrupts(dev, ep_intr); + if (!dev_intr && !ep_intr) + return IRQ_NONE; + spin_lock(&dev->lock); + if (dev_intr) + pch_udc_dev_isr(dev, dev_intr); + if (ep_intr) { + pch_udc_read_all_epstatus(dev, ep_intr); + /* Process Control In interrupts, if present */ + if (ep_intr & UDC_EPINT_IN_EP0) { + pch_udc_svc_control_in(dev); + pch_udc_postsvc_epinters(dev, 0); + } + /* Process Control Out interrupts, if present */ + if (ep_intr & UDC_EPINT_OUT_EP0) + pch_udc_svc_control_out(dev); + /* Process data in end point interrupts */ + for (i = 1; i < PCH_UDC_USED_EP_NUM; i++) { + if (ep_intr & (1 << i)) { + pch_udc_svc_data_in(dev, i); + pch_udc_postsvc_epinters(dev, i); + } + } + /* Process data out end point interrupts */ + for (i = UDC_EPINT_OUT_SHIFT + 1; i < (UDC_EPINT_OUT_SHIFT + + PCH_UDC_USED_EP_NUM); i++) + if (ep_intr & (1 << i)) + pch_udc_svc_data_out(dev, i - + UDC_EPINT_OUT_SHIFT); + } + spin_unlock(&dev->lock); + return IRQ_HANDLED; +} + +/** + * pch_udc_setup_ep0() - This function enables control endpoint for traffic + * @dev: Reference to the device structure + */ +static void pch_udc_setup_ep0(struct pch_udc_dev *dev) +{ + /* enable ep0 interrupts */ + pch_udc_enable_ep_interrupts(dev, UDC_EPINT_IN_EP0 | + UDC_EPINT_OUT_EP0); + /* enable device interrupts */ + pch_udc_enable_interrupts(dev, UDC_DEVINT_UR | UDC_DEVINT_US | + UDC_DEVINT_ES | UDC_DEVINT_ENUM | + UDC_DEVINT_SI | UDC_DEVINT_SC); +} + +/** + * pch_udc_pcd_reinit() - This API initializes the endpoint structures + * @dev: Reference to the driver structure + */ +static void pch_udc_pcd_reinit(struct pch_udc_dev *dev) +{ + const char *const ep_string[] = { + ep0_string, "ep0out", "ep1in", "ep1out", "ep2in", "ep2out", + "ep3in", "ep3out", "ep4in", "ep4out", "ep5in", "ep5out", + "ep6in", "ep6out", "ep7in", "ep7out", "ep8in", "ep8out", + "ep9in", "ep9out", "ep10in", "ep10out", "ep11in", "ep11out", + "ep12in", "ep12out", "ep13in", "ep13out", "ep14in", "ep14out", + "ep15in", "ep15out", + }; + int i; + + dev->gadget.speed = USB_SPEED_UNKNOWN; + INIT_LIST_HEAD(&dev->gadget.ep_list); + + /* Initialize the endpoints structures */ + memset(dev->ep, 0, sizeof dev->ep); + for (i = 0; i < PCH_UDC_EP_NUM; i++) { + struct pch_udc_ep *ep = &dev->ep[i]; + ep->dev = dev; + ep->halted = 1; + ep->num = i / 2; + ep->in = ~i & 1; + ep->ep.name = ep_string[i]; + ep->ep.ops = &pch_udc_ep_ops; + if (ep->in) { + ep->offset_addr = ep->num * UDC_EP_REG_SHIFT; + ep->ep.caps.dir_in = true; + } else { + ep->offset_addr = (UDC_EPINT_OUT_SHIFT + ep->num) * + UDC_EP_REG_SHIFT; + ep->ep.caps.dir_out = true; + } + if (i == UDC_EP0IN_IDX || i == UDC_EP0OUT_IDX) { + ep->ep.caps.type_control = true; + } else { + ep->ep.caps.type_iso = true; + ep->ep.caps.type_bulk = true; + ep->ep.caps.type_int = true; + } + /* need to set ep->ep.maxpacket and set Default Configuration?*/ + usb_ep_set_maxpacket_limit(&ep->ep, UDC_BULK_MAX_PKT_SIZE); + list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list); + INIT_LIST_HEAD(&ep->queue); + } + usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0IN_IDX].ep, UDC_EP0IN_MAX_PKT_SIZE); + usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0OUT_IDX].ep, UDC_EP0OUT_MAX_PKT_SIZE); + + /* remove ep0 in and out from the list. They have own pointer */ + list_del_init(&dev->ep[UDC_EP0IN_IDX].ep.ep_list); + list_del_init(&dev->ep[UDC_EP0OUT_IDX].ep.ep_list); + + dev->gadget.ep0 = &dev->ep[UDC_EP0IN_IDX].ep; + INIT_LIST_HEAD(&dev->gadget.ep0->ep_list); +} + +/** + * pch_udc_pcd_init() - This API initializes the driver structure + * @dev: Reference to the driver structure + * + * Return codes: + * 0: Success + * -ERRNO: All kind of errors when retrieving VBUS GPIO + */ +static int pch_udc_pcd_init(struct pch_udc_dev *dev) +{ + int ret; + + pch_udc_init(dev); + pch_udc_pcd_reinit(dev); + + ret = pch_vbus_gpio_init(dev); + if (ret) + pch_udc_exit(dev); + return ret; +} + +/** + * init_dma_pools() - create dma pools during initialization + * @dev: reference to struct pci_dev + */ +static int init_dma_pools(struct pch_udc_dev *dev) +{ + struct pch_udc_stp_dma_desc *td_stp; + struct pch_udc_data_dma_desc *td_data; + void *ep0out_buf; + + /* DMA setup */ + dev->data_requests = dma_pool_create("data_requests", &dev->pdev->dev, + sizeof(struct pch_udc_data_dma_desc), 0, 0); + if (!dev->data_requests) { + dev_err(&dev->pdev->dev, "%s: can't get request data pool\n", + __func__); + return -ENOMEM; + } + + /* dma desc for setup data */ + dev->stp_requests = dma_pool_create("setup requests", &dev->pdev->dev, + sizeof(struct pch_udc_stp_dma_desc), 0, 0); + if (!dev->stp_requests) { + dev_err(&dev->pdev->dev, "%s: can't get setup request pool\n", + __func__); + return -ENOMEM; + } + /* setup */ + td_stp = dma_pool_alloc(dev->stp_requests, GFP_KERNEL, + &dev->ep[UDC_EP0OUT_IDX].td_stp_phys); + if (!td_stp) { + dev_err(&dev->pdev->dev, + "%s: can't allocate setup dma descriptor\n", __func__); + return -ENOMEM; + } + dev->ep[UDC_EP0OUT_IDX].td_stp = td_stp; + + /* data: 0 packets !? */ + td_data = dma_pool_alloc(dev->data_requests, GFP_KERNEL, + &dev->ep[UDC_EP0OUT_IDX].td_data_phys); + if (!td_data) { + dev_err(&dev->pdev->dev, + "%s: can't allocate data dma descriptor\n", __func__); + return -ENOMEM; + } + dev->ep[UDC_EP0OUT_IDX].td_data = td_data; + dev->ep[UDC_EP0IN_IDX].td_stp = NULL; + dev->ep[UDC_EP0IN_IDX].td_stp_phys = 0; + dev->ep[UDC_EP0IN_IDX].td_data = NULL; + dev->ep[UDC_EP0IN_IDX].td_data_phys = 0; + + ep0out_buf = devm_kzalloc(&dev->pdev->dev, UDC_EP0OUT_BUFF_SIZE * 4, + GFP_KERNEL); + if (!ep0out_buf) + return -ENOMEM; + dev->dma_addr = dma_map_single(&dev->pdev->dev, ep0out_buf, + UDC_EP0OUT_BUFF_SIZE * 4, + DMA_FROM_DEVICE); + return dma_mapping_error(&dev->pdev->dev, dev->dma_addr); +} + +static int pch_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) +{ + struct pch_udc_dev *dev = to_pch_udc(g); + + dev->driver = driver; + + /* get ready for ep0 traffic */ + pch_udc_setup_ep0(dev); + + /* clear SD */ + if ((pch_vbus_gpio_get_value(dev) != 0) || !dev->vbus_gpio.intr) + pch_udc_clear_disconnect(dev); + + dev->connected = 1; + return 0; +} + +static int pch_udc_stop(struct usb_gadget *g) +{ + struct pch_udc_dev *dev = to_pch_udc(g); + + pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK); + + /* Assures that there are no pending requests with this driver */ + dev->driver = NULL; + dev->connected = 0; + + /* set SD */ + pch_udc_set_disconnect(dev); + + return 0; +} + +static void pch_vbus_gpio_remove_table(void *table) +{ + gpiod_remove_lookup_table(table); +} + +static int pch_vbus_gpio_add_table(struct device *d, void *table) +{ + gpiod_add_lookup_table(table); + return devm_add_action_or_reset(d, pch_vbus_gpio_remove_table, table); +} + +static struct gpiod_lookup_table pch_udc_minnow_vbus_gpio_table = { + .dev_id = "0000:02:02.4", + .table = { + GPIO_LOOKUP("sch_gpio.33158", 12, NULL, GPIO_ACTIVE_HIGH), + {} + }, +}; + +static int pch_udc_minnow_platform_init(struct device *d) +{ + return pch_vbus_gpio_add_table(d, &pch_udc_minnow_vbus_gpio_table); +} + +static int pch_udc_quark_platform_init(struct device *d) +{ + struct pch_udc_dev *dev = dev_get_drvdata(d); + + dev->bar = PCH_UDC_PCI_BAR_QUARK_X1000; + return 0; +} + +static void pch_udc_shutdown(struct pci_dev *pdev) +{ + struct pch_udc_dev *dev = pci_get_drvdata(pdev); + + pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK); + pch_udc_disable_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL); + + /* disable the pullup so the host will think we're gone */ + pch_udc_set_disconnect(dev); +} + +static void pch_udc_remove(struct pci_dev *pdev) +{ + struct pch_udc_dev *dev = pci_get_drvdata(pdev); + + usb_del_gadget_udc(&dev->gadget); + + /* gadget driver must not be registered */ + if (dev->driver) + dev_err(&pdev->dev, + "%s: gadget driver still bound!!!\n", __func__); + /* dma pool cleanup */ + dma_pool_destroy(dev->data_requests); + + if (dev->stp_requests) { + /* cleanup DMA desc's for ep0in */ + if (dev->ep[UDC_EP0OUT_IDX].td_stp) { + dma_pool_free(dev->stp_requests, + dev->ep[UDC_EP0OUT_IDX].td_stp, + dev->ep[UDC_EP0OUT_IDX].td_stp_phys); + } + if (dev->ep[UDC_EP0OUT_IDX].td_data) { + dma_pool_free(dev->stp_requests, + dev->ep[UDC_EP0OUT_IDX].td_data, + dev->ep[UDC_EP0OUT_IDX].td_data_phys); + } + dma_pool_destroy(dev->stp_requests); + } + + if (dev->dma_addr) + dma_unmap_single(&dev->pdev->dev, dev->dma_addr, + UDC_EP0OUT_BUFF_SIZE * 4, DMA_FROM_DEVICE); + + pch_vbus_gpio_free(dev); + + pch_udc_exit(dev); +} + +static int __maybe_unused pch_udc_suspend(struct device *d) +{ + struct pch_udc_dev *dev = dev_get_drvdata(d); + + pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK); + pch_udc_disable_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL); + + return 0; +} + +static int __maybe_unused pch_udc_resume(struct device *d) +{ + return 0; +} + +static SIMPLE_DEV_PM_OPS(pch_udc_pm, pch_udc_suspend, pch_udc_resume); + +typedef int (*platform_init_fn)(struct device *); + +static int pch_udc_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + platform_init_fn platform_init = (platform_init_fn)id->driver_data; + int retval; + struct pch_udc_dev *dev; + + /* init */ + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); + if (!dev) + return -ENOMEM; + + /* pci setup */ + retval = pcim_enable_device(pdev); + if (retval) + return retval; + + dev->bar = PCH_UDC_PCI_BAR; + dev->pdev = pdev; + pci_set_drvdata(pdev, dev); + + /* Platform specific hook */ + if (platform_init) { + retval = platform_init(&pdev->dev); + if (retval) + return retval; + } + + /* PCI resource allocation */ + retval = pcim_iomap_regions(pdev, BIT(dev->bar), pci_name(pdev)); + if (retval) + return retval; + + dev->base_addr = pcim_iomap_table(pdev)[dev->bar]; + + /* initialize the hardware */ + retval = pch_udc_pcd_init(dev); + if (retval) + return retval; + + pci_enable_msi(pdev); + + retval = devm_request_irq(&pdev->dev, pdev->irq, pch_udc_isr, + IRQF_SHARED, KBUILD_MODNAME, dev); + if (retval) { + dev_err(&pdev->dev, "%s: request_irq(%d) fail\n", __func__, + pdev->irq); + goto finished; + } + + pci_set_master(pdev); + pci_try_set_mwi(pdev); + + /* device struct setup */ + spin_lock_init(&dev->lock); + dev->gadget.ops = &pch_udc_ops; + + retval = init_dma_pools(dev); + if (retval) + goto finished; + + dev->gadget.name = KBUILD_MODNAME; + dev->gadget.max_speed = USB_SPEED_HIGH; + + /* Put the device in disconnected state till a driver is bound */ + pch_udc_set_disconnect(dev); + retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget); + if (retval) + goto finished; + return 0; + +finished: + pch_udc_remove(pdev); + return retval; +} + +static const struct pci_device_id pch_udc_pcidev_id[] = { + { + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC), + .class = PCI_CLASS_SERIAL_USB_DEVICE, + .class_mask = 0xffffffff, + .driver_data = (kernel_ulong_t)&pch_udc_quark_platform_init, + }, + { + PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EG20T_UDC, + PCI_VENDOR_ID_CIRCUITCO, PCI_SUBSYSTEM_ID_CIRCUITCO_MINNOWBOARD), + .class = PCI_CLASS_SERIAL_USB_DEVICE, + .class_mask = 0xffffffff, + .driver_data = (kernel_ulong_t)&pch_udc_minnow_platform_init, + }, + { + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EG20T_UDC), + .class = PCI_CLASS_SERIAL_USB_DEVICE, + .class_mask = 0xffffffff, + }, + { + PCI_DEVICE(PCI_VENDOR_ID_ROHM, PCI_DEVICE_ID_ML7213_IOH_UDC), + .class = PCI_CLASS_SERIAL_USB_DEVICE, + .class_mask = 0xffffffff, + }, + { + PCI_DEVICE(PCI_VENDOR_ID_ROHM, PCI_DEVICE_ID_ML7831_IOH_UDC), + .class = PCI_CLASS_SERIAL_USB_DEVICE, + .class_mask = 0xffffffff, + }, + { 0 }, +}; + +MODULE_DEVICE_TABLE(pci, pch_udc_pcidev_id); + +static struct pci_driver pch_udc_driver = { + .name = KBUILD_MODNAME, + .id_table = pch_udc_pcidev_id, + .probe = pch_udc_probe, + .remove = pch_udc_remove, + .shutdown = pch_udc_shutdown, + .driver = { + .pm = &pch_udc_pm, + }, +}; + +module_pci_driver(pch_udc_driver); + +MODULE_DESCRIPTION("Intel EG20T USB Device Controller"); +MODULE_AUTHOR("LAPIS Semiconductor, <tomoya-linux@dsn.lapis-semi.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/udc/pxa25x_udc.c b/drivers/usb/gadget/udc/pxa25x_udc.c new file mode 100644 index 000000000..9e01ddf2b --- /dev/null +++ b/drivers/usb/gadget/udc/pxa25x_udc.c @@ -0,0 +1,2550 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Intel PXA25x and IXP4xx on-chip full speed USB device controllers + * + * Copyright (C) 2002 Intrinsyc, Inc. (Frank Becker) + * Copyright (C) 2003 Robert Schwebel, Pengutronix + * Copyright (C) 2003 Benedikt Spranger, Pengutronix + * Copyright (C) 2003 David Brownell + * Copyright (C) 2003 Joshua Wise + */ + +/* #define VERBOSE_DEBUG */ + +#include <linux/device.h> +#include <linux/gpio.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/mm.h> +#include <linux/platform_data/pxa2xx_udc.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/irq.h> +#include <linux/clk.h> +#include <linux/seq_file.h> +#include <linux/debugfs.h> +#include <linux/io.h> +#include <linux/prefetch.h> + +#include <asm/byteorder.h> +#include <asm/dma.h> +#include <asm/mach-types.h> +#include <asm/unaligned.h> + +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/otg.h> + +#define UDCCR 0x0000 /* UDC Control Register */ +#define UDC_RES1 0x0004 /* UDC Undocumented - Reserved1 */ +#define UDC_RES2 0x0008 /* UDC Undocumented - Reserved2 */ +#define UDC_RES3 0x000C /* UDC Undocumented - Reserved3 */ +#define UDCCS0 0x0010 /* UDC Endpoint 0 Control/Status Register */ +#define UDCCS1 0x0014 /* UDC Endpoint 1 (IN) Control/Status Register */ +#define UDCCS2 0x0018 /* UDC Endpoint 2 (OUT) Control/Status Register */ +#define UDCCS3 0x001C /* UDC Endpoint 3 (IN) Control/Status Register */ +#define UDCCS4 0x0020 /* UDC Endpoint 4 (OUT) Control/Status Register */ +#define UDCCS5 0x0024 /* UDC Endpoint 5 (Interrupt) Control/Status Register */ +#define UDCCS6 0x0028 /* UDC Endpoint 6 (IN) Control/Status Register */ +#define UDCCS7 0x002C /* UDC Endpoint 7 (OUT) Control/Status Register */ +#define UDCCS8 0x0030 /* UDC Endpoint 8 (IN) Control/Status Register */ +#define UDCCS9 0x0034 /* UDC Endpoint 9 (OUT) Control/Status Register */ +#define UDCCS10 0x0038 /* UDC Endpoint 10 (Interrupt) Control/Status Register */ +#define UDCCS11 0x003C /* UDC Endpoint 11 (IN) Control/Status Register */ +#define UDCCS12 0x0040 /* UDC Endpoint 12 (OUT) Control/Status Register */ +#define UDCCS13 0x0044 /* UDC Endpoint 13 (IN) Control/Status Register */ +#define UDCCS14 0x0048 /* UDC Endpoint 14 (OUT) Control/Status Register */ +#define UDCCS15 0x004C /* UDC Endpoint 15 (Interrupt) Control/Status Register */ +#define UFNRH 0x0060 /* UDC Frame Number Register High */ +#define UFNRL 0x0064 /* UDC Frame Number Register Low */ +#define UBCR2 0x0068 /* UDC Byte Count Reg 2 */ +#define UBCR4 0x006c /* UDC Byte Count Reg 4 */ +#define UBCR7 0x0070 /* UDC Byte Count Reg 7 */ +#define UBCR9 0x0074 /* UDC Byte Count Reg 9 */ +#define UBCR12 0x0078 /* UDC Byte Count Reg 12 */ +#define UBCR14 0x007c /* UDC Byte Count Reg 14 */ +#define UDDR0 0x0080 /* UDC Endpoint 0 Data Register */ +#define UDDR1 0x0100 /* UDC Endpoint 1 Data Register */ +#define UDDR2 0x0180 /* UDC Endpoint 2 Data Register */ +#define UDDR3 0x0200 /* UDC Endpoint 3 Data Register */ +#define UDDR4 0x0400 /* UDC Endpoint 4 Data Register */ +#define UDDR5 0x00A0 /* UDC Endpoint 5 Data Register */ +#define UDDR6 0x0600 /* UDC Endpoint 6 Data Register */ +#define UDDR7 0x0680 /* UDC Endpoint 7 Data Register */ +#define UDDR8 0x0700 /* UDC Endpoint 8 Data Register */ +#define UDDR9 0x0900 /* UDC Endpoint 9 Data Register */ +#define UDDR10 0x00C0 /* UDC Endpoint 10 Data Register */ +#define UDDR11 0x0B00 /* UDC Endpoint 11 Data Register */ +#define UDDR12 0x0B80 /* UDC Endpoint 12 Data Register */ +#define UDDR13 0x0C00 /* UDC Endpoint 13 Data Register */ +#define UDDR14 0x0E00 /* UDC Endpoint 14 Data Register */ +#define UDDR15 0x00E0 /* UDC Endpoint 15 Data Register */ + +#define UICR0 0x0050 /* UDC Interrupt Control Register 0 */ +#define UICR1 0x0054 /* UDC Interrupt Control Register 1 */ + +#define USIR0 0x0058 /* UDC Status Interrupt Register 0 */ +#define USIR1 0x005C /* UDC Status Interrupt Register 1 */ + +#define UDCCR_UDE (1 << 0) /* UDC enable */ +#define UDCCR_UDA (1 << 1) /* UDC active */ +#define UDCCR_RSM (1 << 2) /* Device resume */ +#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */ +#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */ +#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */ +#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */ +#define UDCCR_REM (1 << 7) /* Reset interrupt mask */ + +#define UDCCS0_OPR (1 << 0) /* OUT packet ready */ +#define UDCCS0_IPR (1 << 1) /* IN packet ready */ +#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */ +#define UDCCS0_SST (1 << 4) /* Sent stall */ +#define UDCCS0_FST (1 << 5) /* Force stall */ +#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */ +#define UDCCS0_SA (1 << 7) /* Setup active */ + +#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */ +#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */ +#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */ +#define UDCCS_BI_SST (1 << 4) /* Sent stall */ +#define UDCCS_BI_FST (1 << 5) /* Force stall */ +#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */ + +#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */ +#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */ +#define UDCCS_BO_DME (1 << 3) /* DMA enable */ +#define UDCCS_BO_SST (1 << 4) /* Sent stall */ +#define UDCCS_BO_FST (1 << 5) /* Force stall */ +#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */ +#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */ + +#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */ +#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */ +#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */ +#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */ + +#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */ +#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */ +#ifdef CONFIG_ARCH_IXP4XX /* FIXME: is this right?, datasheed says '2' */ +#define UDCCS_IO_ROF (1 << 3) /* Receive overflow */ +#endif +#ifdef CONFIG_ARCH_PXA +#define UDCCS_IO_ROF (1 << 2) /* Receive overflow */ +#endif +#define UDCCS_IO_DME (1 << 3) /* DMA enable */ +#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */ +#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */ + +#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */ +#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */ +#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */ +#define UDCCS_INT_SST (1 << 4) /* Sent stall */ +#define UDCCS_INT_FST (1 << 5) /* Force stall */ +#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */ + +#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */ +#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */ +#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */ +#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */ +#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */ +#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */ +#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */ +#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */ + +#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */ +#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */ +#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */ +#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */ +#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */ +#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */ +#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */ +#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */ + +#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */ +#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */ +#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */ +#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */ +#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */ +#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */ +#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */ +#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */ + +#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */ +#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */ +#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */ +#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */ +#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */ +#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */ +#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */ +#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */ + +/* + * This driver handles the USB Device Controller (UDC) in Intel's PXA 25x + * series processors. The UDC for the IXP 4xx series is very similar. + * There are fifteen endpoints, in addition to ep0. + * + * Such controller drivers work with a gadget driver. The gadget driver + * returns descriptors, implements configuration and data protocols used + * by the host to interact with this device, and allocates endpoints to + * the different protocol interfaces. The controller driver virtualizes + * usb hardware so that the gadget drivers will be more portable. + * + * This UDC hardware wants to implement a bit too much USB protocol, so + * it constrains the sorts of USB configuration change events that work. + * The errata for these chips are misleading; some "fixed" bugs from + * pxa250 a0/a1 b0/b1/b2 sure act like they're still there. + * + * Note that the UDC hardware supports DMA (except on IXP) but that's + * not used here. IN-DMA (to host) is simple enough, when the data is + * suitably aligned (16 bytes) ... the network stack doesn't do that, + * other software can. OUT-DMA is buggy in most chip versions, as well + * as poorly designed (data toggle not automatic). So this driver won't + * bother using DMA. (Mostly-working IN-DMA support was available in + * kernels before 2.6.23, but was never enabled or well tested.) + */ + +#define DRIVER_VERSION "30-June-2007" +#define DRIVER_DESC "PXA 25x USB Device Controller driver" + + +static const char driver_name [] = "pxa25x_udc"; + +static const char ep0name [] = "ep0"; + + +#ifdef CONFIG_ARCH_IXP4XX + +/* cpu-specific register addresses are compiled in to this code */ +#ifdef CONFIG_ARCH_PXA +#error "Can't configure both IXP and PXA" +#endif + +/* IXP doesn't yet support <linux/clk.h> */ +#define clk_get(dev,name) NULL +#define clk_enable(clk) do { } while (0) +#define clk_disable(clk) do { } while (0) +#define clk_put(clk) do { } while (0) + +#endif + +#include "pxa25x_udc.h" + + +#ifdef CONFIG_USB_PXA25X_SMALL +#define SIZE_STR " (small)" +#else +#define SIZE_STR "" +#endif + +/* --------------------------------------------------------------------------- + * endpoint related parts of the api to the usb controller hardware, + * used by gadget driver; and the inner talker-to-hardware core. + * --------------------------------------------------------------------------- + */ + +static void pxa25x_ep_fifo_flush (struct usb_ep *ep); +static void nuke (struct pxa25x_ep *, int status); + +/* one GPIO should control a D+ pullup, so host sees this device (or not) */ +static void pullup_off(void) +{ + struct pxa2xx_udc_mach_info *mach = the_controller->mach; + int off_level = mach->gpio_pullup_inverted; + + if (gpio_is_valid(mach->gpio_pullup)) + gpio_set_value(mach->gpio_pullup, off_level); + else if (mach->udc_command) + mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT); +} + +static void pullup_on(void) +{ + struct pxa2xx_udc_mach_info *mach = the_controller->mach; + int on_level = !mach->gpio_pullup_inverted; + + if (gpio_is_valid(mach->gpio_pullup)) + gpio_set_value(mach->gpio_pullup, on_level); + else if (mach->udc_command) + mach->udc_command(PXA2XX_UDC_CMD_CONNECT); +} + +#if defined(CONFIG_CPU_BIG_ENDIAN) +/* + * IXP4xx has its buses wired up in a way that relies on never doing any + * byte swaps, independent of whether it runs in big-endian or little-endian + * mode, as explained by Krzysztof HaÅ‚asa. + * + * We only support pxa25x in little-endian mode, but it is very likely + * that it works the same way. + */ +static inline void udc_set_reg(struct pxa25x_udc *dev, u32 reg, u32 val) +{ + iowrite32be(val, dev->regs + reg); +} + +static inline u32 udc_get_reg(struct pxa25x_udc *dev, u32 reg) +{ + return ioread32be(dev->regs + reg); +} +#else +static inline void udc_set_reg(struct pxa25x_udc *dev, u32 reg, u32 val) +{ + writel(val, dev->regs + reg); +} + +static inline u32 udc_get_reg(struct pxa25x_udc *dev, u32 reg) +{ + return readl(dev->regs + reg); +} +#endif + +static void pio_irq_enable(struct pxa25x_ep *ep) +{ + u32 bEndpointAddress = ep->bEndpointAddress & 0xf; + + if (bEndpointAddress < 8) + udc_set_reg(ep->dev, UICR0, udc_get_reg(ep->dev, UICR0) & + ~(1 << bEndpointAddress)); + else { + bEndpointAddress -= 8; + udc_set_reg(ep->dev, UICR1, udc_get_reg(ep->dev, UICR1) & + ~(1 << bEndpointAddress)); + } +} + +static void pio_irq_disable(struct pxa25x_ep *ep) +{ + u32 bEndpointAddress = ep->bEndpointAddress & 0xf; + + if (bEndpointAddress < 8) + udc_set_reg(ep->dev, UICR0, udc_get_reg(ep->dev, UICR0) | + (1 << bEndpointAddress)); + else { + bEndpointAddress -= 8; + udc_set_reg(ep->dev, UICR1, udc_get_reg(ep->dev, UICR1) | + (1 << bEndpointAddress)); + } +} + +/* The UDCCR reg contains mask and interrupt status bits, + * so using '|=' isn't safe as it may ack an interrupt. + */ +#define UDCCR_MASK_BITS (UDCCR_REM | UDCCR_SRM | UDCCR_UDE) + +static inline void udc_set_mask_UDCCR(struct pxa25x_udc *dev, int mask) +{ + u32 udccr = udc_get_reg(dev, UDCCR); + + udc_set_reg(dev, (udccr & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS), UDCCR); +} + +static inline void udc_clear_mask_UDCCR(struct pxa25x_udc *dev, int mask) +{ + u32 udccr = udc_get_reg(dev, UDCCR); + + udc_set_reg(dev, (udccr & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS), UDCCR); +} + +static inline void udc_ack_int_UDCCR(struct pxa25x_udc *dev, int mask) +{ + /* udccr contains the bits we dont want to change */ + u32 udccr = udc_get_reg(dev, UDCCR) & UDCCR_MASK_BITS; + + udc_set_reg(dev, udccr | (mask & ~UDCCR_MASK_BITS), UDCCR); +} + +static inline u32 udc_ep_get_UDCCS(struct pxa25x_ep *ep) +{ + return udc_get_reg(ep->dev, ep->regoff_udccs); +} + +static inline void udc_ep_set_UDCCS(struct pxa25x_ep *ep, u32 data) +{ + udc_set_reg(ep->dev, data, ep->regoff_udccs); +} + +static inline u32 udc_ep0_get_UDCCS(struct pxa25x_udc *dev) +{ + return udc_get_reg(dev, UDCCS0); +} + +static inline void udc_ep0_set_UDCCS(struct pxa25x_udc *dev, u32 data) +{ + udc_set_reg(dev, data, UDCCS0); +} + +static inline u32 udc_ep_get_UDDR(struct pxa25x_ep *ep) +{ + return udc_get_reg(ep->dev, ep->regoff_uddr); +} + +static inline void udc_ep_set_UDDR(struct pxa25x_ep *ep, u32 data) +{ + udc_set_reg(ep->dev, data, ep->regoff_uddr); +} + +static inline u32 udc_ep_get_UBCR(struct pxa25x_ep *ep) +{ + return udc_get_reg(ep->dev, ep->regoff_ubcr); +} + +/* + * endpoint enable/disable + * + * we need to verify the descriptors used to enable endpoints. since pxa25x + * endpoint configurations are fixed, and are pretty much always enabled, + * there's not a lot to manage here. + * + * because pxa25x can't selectively initialize bulk (or interrupt) endpoints, + * (resetting endpoint halt and toggle), SET_INTERFACE is unusable except + * for a single interface (with only the default altsetting) and for gadget + * drivers that don't halt endpoints (not reset by set_interface). that also + * means that if you use ISO, you must violate the USB spec rule that all + * iso endpoints must be in non-default altsettings. + */ +static int pxa25x_ep_enable (struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct pxa25x_ep *ep; + struct pxa25x_udc *dev; + + ep = container_of (_ep, struct pxa25x_ep, ep); + if (!_ep || !desc || _ep->name == ep0name + || desc->bDescriptorType != USB_DT_ENDPOINT + || ep->bEndpointAddress != desc->bEndpointAddress + || ep->fifo_size < usb_endpoint_maxp (desc)) { + DMSG("%s, bad ep or descriptor\n", __func__); + return -EINVAL; + } + + /* xfer types must match, except that interrupt ~= bulk */ + if (ep->bmAttributes != desc->bmAttributes + && ep->bmAttributes != USB_ENDPOINT_XFER_BULK + && desc->bmAttributes != USB_ENDPOINT_XFER_INT) { + DMSG("%s, %s type mismatch\n", __func__, _ep->name); + return -EINVAL; + } + + /* hardware _could_ do smaller, but driver doesn't */ + if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK + && usb_endpoint_maxp (desc) + != BULK_FIFO_SIZE) + || !desc->wMaxPacketSize) { + DMSG("%s, bad %s maxpacket\n", __func__, _ep->name); + return -ERANGE; + } + + dev = ep->dev; + if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) { + DMSG("%s, bogus device state\n", __func__); + return -ESHUTDOWN; + } + + ep->ep.desc = desc; + ep->stopped = 0; + ep->pio_irqs = 0; + ep->ep.maxpacket = usb_endpoint_maxp (desc); + + /* flush fifo (mostly for OUT buffers) */ + pxa25x_ep_fifo_flush (_ep); + + /* ... reset halt state too, if we could ... */ + + DBG(DBG_VERBOSE, "enabled %s\n", _ep->name); + return 0; +} + +static int pxa25x_ep_disable (struct usb_ep *_ep) +{ + struct pxa25x_ep *ep; + unsigned long flags; + + ep = container_of (_ep, struct pxa25x_ep, ep); + if (!_ep || !ep->ep.desc) { + DMSG("%s, %s not enabled\n", __func__, + _ep ? ep->ep.name : NULL); + return -EINVAL; + } + local_irq_save(flags); + + nuke (ep, -ESHUTDOWN); + + /* flush fifo (mostly for IN buffers) */ + pxa25x_ep_fifo_flush (_ep); + + ep->ep.desc = NULL; + ep->stopped = 1; + + local_irq_restore(flags); + DBG(DBG_VERBOSE, "%s disabled\n", _ep->name); + return 0; +} + +/*-------------------------------------------------------------------------*/ + +/* for the pxa25x, these can just wrap kmalloc/kfree. gadget drivers + * must still pass correctly initialized endpoints, since other controller + * drivers may care about how it's currently set up (dma issues etc). + */ + +/* + * pxa25x_ep_alloc_request - allocate a request data structure + */ +static struct usb_request * +pxa25x_ep_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags) +{ + struct pxa25x_request *req; + + req = kzalloc(sizeof(*req), gfp_flags); + if (!req) + return NULL; + + INIT_LIST_HEAD (&req->queue); + return &req->req; +} + + +/* + * pxa25x_ep_free_request - deallocate a request data structure + */ +static void +pxa25x_ep_free_request (struct usb_ep *_ep, struct usb_request *_req) +{ + struct pxa25x_request *req; + + req = container_of (_req, struct pxa25x_request, req); + WARN_ON(!list_empty (&req->queue)); + kfree(req); +} + +/*-------------------------------------------------------------------------*/ + +/* + * done - retire a request; caller blocked irqs + */ +static void done(struct pxa25x_ep *ep, struct pxa25x_request *req, int status) +{ + unsigned stopped = ep->stopped; + + list_del_init(&req->queue); + + if (likely (req->req.status == -EINPROGRESS)) + req->req.status = status; + else + status = req->req.status; + + if (status && status != -ESHUTDOWN) + DBG(DBG_VERBOSE, "complete %s req %p stat %d len %u/%u\n", + ep->ep.name, &req->req, status, + req->req.actual, req->req.length); + + /* don't modify queue heads during completion callback */ + ep->stopped = 1; + usb_gadget_giveback_request(&ep->ep, &req->req); + ep->stopped = stopped; +} + + +static inline void ep0_idle (struct pxa25x_udc *dev) +{ + dev->ep0state = EP0_IDLE; +} + +static int +write_packet(struct pxa25x_ep *ep, struct pxa25x_request *req, unsigned max) +{ + u8 *buf; + unsigned length, count; + + buf = req->req.buf + req->req.actual; + prefetch(buf); + + /* how big will this packet be? */ + length = min(req->req.length - req->req.actual, max); + req->req.actual += length; + + count = length; + while (likely(count--)) + udc_ep_set_UDDR(ep, *buf++); + + return length; +} + +/* + * write to an IN endpoint fifo, as many packets as possible. + * irqs will use this to write the rest later. + * caller guarantees at least one packet buffer is ready (or a zlp). + */ +static int +write_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req) +{ + unsigned max; + + max = usb_endpoint_maxp(ep->ep.desc); + do { + unsigned count; + int is_last, is_short; + + count = write_packet(ep, req, max); + + /* last packet is usually short (or a zlp) */ + if (unlikely (count != max)) + is_last = is_short = 1; + else { + if (likely(req->req.length != req->req.actual) + || req->req.zero) + is_last = 0; + else + is_last = 1; + /* interrupt/iso maxpacket may not fill the fifo */ + is_short = unlikely (max < ep->fifo_size); + } + + DBG(DBG_VERY_NOISY, "wrote %s %d bytes%s%s %d left %p\n", + ep->ep.name, count, + is_last ? "/L" : "", is_short ? "/S" : "", + req->req.length - req->req.actual, req); + + /* let loose that packet. maybe try writing another one, + * double buffering might work. TSP, TPC, and TFS + * bit values are the same for all normal IN endpoints. + */ + udc_ep_set_UDCCS(ep, UDCCS_BI_TPC); + if (is_short) + udc_ep_set_UDCCS(ep, UDCCS_BI_TSP); + + /* requests complete when all IN data is in the FIFO */ + if (is_last) { + done (ep, req, 0); + if (list_empty(&ep->queue)) + pio_irq_disable(ep); + return 1; + } + + // TODO experiment: how robust can fifo mode tweaking be? + // double buffering is off in the default fifo mode, which + // prevents TFS from being set here. + + } while (udc_ep_get_UDCCS(ep) & UDCCS_BI_TFS); + return 0; +} + +/* caller asserts req->pending (ep0 irq status nyet cleared); starts + * ep0 data stage. these chips want very simple state transitions. + */ +static inline +void ep0start(struct pxa25x_udc *dev, u32 flags, const char *tag) +{ + udc_ep0_set_UDCCS(dev, flags|UDCCS0_SA|UDCCS0_OPR); + udc_set_reg(dev, USIR0, USIR0_IR0); + dev->req_pending = 0; + DBG(DBG_VERY_NOISY, "%s %s, %02x/%02x\n", + __func__, tag, udc_ep0_get_UDCCS(dev), flags); +} + +static int +write_ep0_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req) +{ + struct pxa25x_udc *dev = ep->dev; + unsigned count; + int is_short; + + count = write_packet(&dev->ep[0], req, EP0_FIFO_SIZE); + ep->dev->stats.write.bytes += count; + + /* last packet "must be" short (or a zlp) */ + is_short = (count != EP0_FIFO_SIZE); + + DBG(DBG_VERY_NOISY, "ep0in %d bytes %d left %p\n", count, + req->req.length - req->req.actual, req); + + if (unlikely (is_short)) { + if (ep->dev->req_pending) + ep0start(ep->dev, UDCCS0_IPR, "short IN"); + else + udc_ep0_set_UDCCS(dev, UDCCS0_IPR); + + count = req->req.length; + done (ep, req, 0); + ep0_idle(ep->dev); +#ifndef CONFIG_ARCH_IXP4XX +#if 1 + /* This seems to get rid of lost status irqs in some cases: + * host responds quickly, or next request involves config + * change automagic, or should have been hidden, or ... + * + * FIXME get rid of all udelays possible... + */ + if (count >= EP0_FIFO_SIZE) { + count = 100; + do { + if ((udc_ep0_get_UDCCS(dev) & UDCCS0_OPR) != 0) { + /* clear OPR, generate ack */ + udc_ep0_set_UDCCS(dev, UDCCS0_OPR); + break; + } + count--; + udelay(1); + } while (count); + } +#endif +#endif + } else if (ep->dev->req_pending) + ep0start(ep->dev, 0, "IN"); + return is_short; +} + + +/* + * read_fifo - unload packet(s) from the fifo we use for usb OUT + * transfers and put them into the request. caller should have made + * sure there's at least one packet ready. + * + * returns true if the request completed because of short packet or the + * request buffer having filled (and maybe overran till end-of-packet). + */ +static int +read_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req) +{ + for (;;) { + u32 udccs; + u8 *buf; + unsigned bufferspace, count, is_short; + + /* make sure there's a packet in the FIFO. + * UDCCS_{BO,IO}_RPC are all the same bit value. + * UDCCS_{BO,IO}_RNE are all the same bit value. + */ + udccs = udc_ep_get_UDCCS(ep); + if (unlikely ((udccs & UDCCS_BO_RPC) == 0)) + break; + buf = req->req.buf + req->req.actual; + prefetchw(buf); + bufferspace = req->req.length - req->req.actual; + + /* read all bytes from this packet */ + if (likely (udccs & UDCCS_BO_RNE)) { + count = 1 + (0x0ff & udc_ep_get_UBCR(ep)); + req->req.actual += min (count, bufferspace); + } else /* zlp */ + count = 0; + is_short = (count < ep->ep.maxpacket); + DBG(DBG_VERY_NOISY, "read %s %02x, %d bytes%s req %p %d/%d\n", + ep->ep.name, udccs, count, + is_short ? "/S" : "", + req, req->req.actual, req->req.length); + while (likely (count-- != 0)) { + u8 byte = (u8) udc_ep_get_UDDR(ep); + + if (unlikely (bufferspace == 0)) { + /* this happens when the driver's buffer + * is smaller than what the host sent. + * discard the extra data. + */ + if (req->req.status != -EOVERFLOW) + DMSG("%s overflow %d\n", + ep->ep.name, count); + req->req.status = -EOVERFLOW; + } else { + *buf++ = byte; + bufferspace--; + } + } + udc_ep_set_UDCCS(ep, UDCCS_BO_RPC); + /* RPC/RSP/RNE could now reflect the other packet buffer */ + + /* iso is one request per packet */ + if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + if (udccs & UDCCS_IO_ROF) + req->req.status = -EHOSTUNREACH; + /* more like "is_done" */ + is_short = 1; + } + + /* completion */ + if (is_short || req->req.actual == req->req.length) { + done (ep, req, 0); + if (list_empty(&ep->queue)) + pio_irq_disable(ep); + return 1; + } + + /* finished that packet. the next one may be waiting... */ + } + return 0; +} + +/* + * special ep0 version of the above. no UBCR0 or double buffering; status + * handshaking is magic. most device protocols don't need control-OUT. + * CDC vendor commands (and RNDIS), mass storage CB/CBI, and some other + * protocols do use them. + */ +static int +read_ep0_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req) +{ + u8 *buf, byte; + unsigned bufferspace; + + buf = req->req.buf + req->req.actual; + bufferspace = req->req.length - req->req.actual; + + while (udc_ep_get_UDCCS(ep) & UDCCS0_RNE) { + byte = (u8) UDDR0; + + if (unlikely (bufferspace == 0)) { + /* this happens when the driver's buffer + * is smaller than what the host sent. + * discard the extra data. + */ + if (req->req.status != -EOVERFLOW) + DMSG("%s overflow\n", ep->ep.name); + req->req.status = -EOVERFLOW; + } else { + *buf++ = byte; + req->req.actual++; + bufferspace--; + } + } + + udc_ep_set_UDCCS(ep, UDCCS0_OPR | UDCCS0_IPR); + + /* completion */ + if (req->req.actual >= req->req.length) + return 1; + + /* finished that packet. the next one may be waiting... */ + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static int +pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) +{ + struct pxa25x_request *req; + struct pxa25x_ep *ep; + struct pxa25x_udc *dev; + unsigned long flags; + + req = container_of(_req, struct pxa25x_request, req); + if (unlikely (!_req || !_req->complete || !_req->buf + || !list_empty(&req->queue))) { + DMSG("%s, bad params\n", __func__); + return -EINVAL; + } + + ep = container_of(_ep, struct pxa25x_ep, ep); + if (unlikely(!_ep || (!ep->ep.desc && ep->ep.name != ep0name))) { + DMSG("%s, bad ep\n", __func__); + return -EINVAL; + } + + dev = ep->dev; + if (unlikely (!dev->driver + || dev->gadget.speed == USB_SPEED_UNKNOWN)) { + DMSG("%s, bogus device state\n", __func__); + return -ESHUTDOWN; + } + + /* iso is always one packet per request, that's the only way + * we can report per-packet status. that also helps with dma. + */ + if (unlikely (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC + && req->req.length > usb_endpoint_maxp(ep->ep.desc))) + return -EMSGSIZE; + + DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n", + _ep->name, _req, _req->length, _req->buf); + + local_irq_save(flags); + + _req->status = -EINPROGRESS; + _req->actual = 0; + + /* kickstart this i/o queue? */ + if (list_empty(&ep->queue) && !ep->stopped) { + if (ep->ep.desc == NULL/* ep0 */) { + unsigned length = _req->length; + + switch (dev->ep0state) { + case EP0_IN_DATA_PHASE: + dev->stats.write.ops++; + if (write_ep0_fifo(ep, req)) + req = NULL; + break; + + case EP0_OUT_DATA_PHASE: + dev->stats.read.ops++; + /* messy ... */ + if (dev->req_config) { + DBG(DBG_VERBOSE, "ep0 config ack%s\n", + dev->has_cfr ? "" : " raced"); + if (dev->has_cfr) + udc_set_reg(dev, UDCCFR, UDCCFR_AREN | + UDCCFR_ACM | UDCCFR_MB1); + done(ep, req, 0); + dev->ep0state = EP0_END_XFER; + local_irq_restore (flags); + return 0; + } + if (dev->req_pending) + ep0start(dev, UDCCS0_IPR, "OUT"); + if (length == 0 || ((udc_ep0_get_UDCCS(dev) & UDCCS0_RNE) != 0 + && read_ep0_fifo(ep, req))) { + ep0_idle(dev); + done(ep, req, 0); + req = NULL; + } + break; + + default: + DMSG("ep0 i/o, odd state %d\n", dev->ep0state); + local_irq_restore (flags); + return -EL2HLT; + } + /* can the FIFO can satisfy the request immediately? */ + } else if ((ep->bEndpointAddress & USB_DIR_IN) != 0) { + if ((udc_ep_get_UDCCS(ep) & UDCCS_BI_TFS) != 0 + && write_fifo(ep, req)) + req = NULL; + } else if ((udc_ep_get_UDCCS(ep) & UDCCS_BO_RFS) != 0 + && read_fifo(ep, req)) { + req = NULL; + } + + if (likely(req && ep->ep.desc)) + pio_irq_enable(ep); + } + + /* pio or dma irq handler advances the queue. */ + if (likely(req != NULL)) + list_add_tail(&req->queue, &ep->queue); + local_irq_restore(flags); + + return 0; +} + + +/* + * nuke - dequeue ALL requests + */ +static void nuke(struct pxa25x_ep *ep, int status) +{ + struct pxa25x_request *req; + + /* called with irqs blocked */ + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, + struct pxa25x_request, + queue); + done(ep, req, status); + } + if (ep->ep.desc) + pio_irq_disable(ep); +} + + +/* dequeue JUST ONE request */ +static int pxa25x_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct pxa25x_ep *ep; + struct pxa25x_request *req = NULL; + struct pxa25x_request *iter; + unsigned long flags; + + ep = container_of(_ep, struct pxa25x_ep, ep); + if (!_ep || ep->ep.name == ep0name) + return -EINVAL; + + local_irq_save(flags); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry(iter, &ep->queue, queue) { + if (&iter->req != _req) + continue; + req = iter; + break; + } + if (!req) { + local_irq_restore(flags); + return -EINVAL; + } + + done(ep, req, -ECONNRESET); + + local_irq_restore(flags); + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static int pxa25x_ep_set_halt(struct usb_ep *_ep, int value) +{ + struct pxa25x_ep *ep; + unsigned long flags; + + ep = container_of(_ep, struct pxa25x_ep, ep); + if (unlikely (!_ep + || (!ep->ep.desc && ep->ep.name != ep0name)) + || ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + DMSG("%s, bad ep\n", __func__); + return -EINVAL; + } + if (value == 0) { + /* this path (reset toggle+halt) is needed to implement + * SET_INTERFACE on normal hardware. but it can't be + * done from software on the PXA UDC, and the hardware + * forgets to do it as part of SET_INTERFACE automagic. + */ + DMSG("only host can clear %s halt\n", _ep->name); + return -EROFS; + } + + local_irq_save(flags); + + if ((ep->bEndpointAddress & USB_DIR_IN) != 0 + && ((udc_ep_get_UDCCS(ep) & UDCCS_BI_TFS) == 0 + || !list_empty(&ep->queue))) { + local_irq_restore(flags); + return -EAGAIN; + } + + /* FST bit is the same for control, bulk in, bulk out, interrupt in */ + udc_ep_set_UDCCS(ep, UDCCS_BI_FST|UDCCS_BI_FTF); + + /* ep0 needs special care */ + if (!ep->ep.desc) { + start_watchdog(ep->dev); + ep->dev->req_pending = 0; + ep->dev->ep0state = EP0_STALL; + + /* and bulk/intr endpoints like dropping stalls too */ + } else { + unsigned i; + for (i = 0; i < 1000; i += 20) { + if (udc_ep_get_UDCCS(ep) & UDCCS_BI_SST) + break; + udelay(20); + } + } + local_irq_restore(flags); + + DBG(DBG_VERBOSE, "%s halt\n", _ep->name); + return 0; +} + +static int pxa25x_ep_fifo_status(struct usb_ep *_ep) +{ + struct pxa25x_ep *ep; + + ep = container_of(_ep, struct pxa25x_ep, ep); + if (!_ep) { + DMSG("%s, bad ep\n", __func__); + return -ENODEV; + } + /* pxa can't report unclaimed bytes from IN fifos */ + if ((ep->bEndpointAddress & USB_DIR_IN) != 0) + return -EOPNOTSUPP; + if (ep->dev->gadget.speed == USB_SPEED_UNKNOWN + || (udc_ep_get_UDCCS(ep) & UDCCS_BO_RFS) == 0) + return 0; + else + return (udc_ep_get_UBCR(ep) & 0xfff) + 1; +} + +static void pxa25x_ep_fifo_flush(struct usb_ep *_ep) +{ + struct pxa25x_ep *ep; + + ep = container_of(_ep, struct pxa25x_ep, ep); + if (!_ep || ep->ep.name == ep0name || !list_empty(&ep->queue)) { + DMSG("%s, bad ep\n", __func__); + return; + } + + /* toggle and halt bits stay unchanged */ + + /* for OUT, just read and discard the FIFO contents. */ + if ((ep->bEndpointAddress & USB_DIR_IN) == 0) { + while (((udc_ep_get_UDCCS(ep)) & UDCCS_BO_RNE) != 0) + (void)udc_ep_get_UDDR(ep); + return; + } + + /* most IN status is the same, but ISO can't stall */ + udc_ep_set_UDCCS(ep, UDCCS_BI_TPC|UDCCS_BI_FTF|UDCCS_BI_TUR + | (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC + ? 0 : UDCCS_BI_SST)); +} + + +static const struct usb_ep_ops pxa25x_ep_ops = { + .enable = pxa25x_ep_enable, + .disable = pxa25x_ep_disable, + + .alloc_request = pxa25x_ep_alloc_request, + .free_request = pxa25x_ep_free_request, + + .queue = pxa25x_ep_queue, + .dequeue = pxa25x_ep_dequeue, + + .set_halt = pxa25x_ep_set_halt, + .fifo_status = pxa25x_ep_fifo_status, + .fifo_flush = pxa25x_ep_fifo_flush, +}; + + +/* --------------------------------------------------------------------------- + * device-scoped parts of the api to the usb controller hardware + * --------------------------------------------------------------------------- + */ + +static int pxa25x_udc_get_frame(struct usb_gadget *_gadget) +{ + struct pxa25x_udc *dev; + + dev = container_of(_gadget, struct pxa25x_udc, gadget); + return ((udc_get_reg(dev, UFNRH) & 0x07) << 8) | + (udc_get_reg(dev, UFNRL) & 0xff); +} + +static int pxa25x_udc_wakeup(struct usb_gadget *_gadget) +{ + struct pxa25x_udc *udc; + + udc = container_of(_gadget, struct pxa25x_udc, gadget); + + /* host may not have enabled remote wakeup */ + if ((udc_ep0_get_UDCCS(udc) & UDCCS0_DRWF) == 0) + return -EHOSTUNREACH; + udc_set_mask_UDCCR(udc, UDCCR_RSM); + return 0; +} + +static void stop_activity(struct pxa25x_udc *, struct usb_gadget_driver *); +static void udc_enable (struct pxa25x_udc *); +static void udc_disable(struct pxa25x_udc *); + +/* We disable the UDC -- and its 48 MHz clock -- whenever it's not + * in active use. + */ +static int pullup(struct pxa25x_udc *udc) +{ + int is_active = udc->vbus && udc->pullup && !udc->suspended; + DMSG("%s\n", is_active ? "active" : "inactive"); + if (is_active) { + if (!udc->active) { + udc->active = 1; + /* Enable clock for USB device */ + clk_enable(udc->clk); + udc_enable(udc); + } + } else { + if (udc->active) { + if (udc->gadget.speed != USB_SPEED_UNKNOWN) { + DMSG("disconnect %s\n", udc->driver + ? udc->driver->driver.name + : "(no driver)"); + stop_activity(udc, udc->driver); + } + udc_disable(udc); + /* Disable clock for USB device */ + clk_disable(udc->clk); + udc->active = 0; + } + + } + return 0; +} + +/* VBUS reporting logically comes from a transceiver */ +static int pxa25x_udc_vbus_session(struct usb_gadget *_gadget, int is_active) +{ + struct pxa25x_udc *udc; + + udc = container_of(_gadget, struct pxa25x_udc, gadget); + udc->vbus = is_active; + DMSG("vbus %s\n", is_active ? "supplied" : "inactive"); + pullup(udc); + return 0; +} + +/* drivers may have software control over D+ pullup */ +static int pxa25x_udc_pullup(struct usb_gadget *_gadget, int is_active) +{ + struct pxa25x_udc *udc; + + udc = container_of(_gadget, struct pxa25x_udc, gadget); + + /* not all boards support pullup control */ + if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command) + return -EOPNOTSUPP; + + udc->pullup = (is_active != 0); + pullup(udc); + return 0; +} + +/* boards may consume current from VBUS, up to 100-500mA based on config. + * the 500uA suspend ceiling means that exclusively vbus-powered PXA designs + * violate USB specs. + */ +static int pxa25x_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA) +{ + struct pxa25x_udc *udc; + + udc = container_of(_gadget, struct pxa25x_udc, gadget); + + if (!IS_ERR_OR_NULL(udc->transceiver)) + return usb_phy_set_power(udc->transceiver, mA); + return -EOPNOTSUPP; +} + +static int pxa25x_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver); +static int pxa25x_udc_stop(struct usb_gadget *g); + +static const struct usb_gadget_ops pxa25x_udc_ops = { + .get_frame = pxa25x_udc_get_frame, + .wakeup = pxa25x_udc_wakeup, + .vbus_session = pxa25x_udc_vbus_session, + .pullup = pxa25x_udc_pullup, + .vbus_draw = pxa25x_udc_vbus_draw, + .udc_start = pxa25x_udc_start, + .udc_stop = pxa25x_udc_stop, +}; + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_USB_GADGET_DEBUG_FS + +static int udc_debug_show(struct seq_file *m, void *_d) +{ + struct pxa25x_udc *dev = m->private; + unsigned long flags; + int i; + u32 tmp; + + local_irq_save(flags); + + /* basic device status */ + seq_printf(m, DRIVER_DESC "\n" + "%s version: %s\nGadget driver: %s\nHost %s\n\n", + driver_name, DRIVER_VERSION SIZE_STR "(pio)", + dev->driver ? dev->driver->driver.name : "(none)", + dev->gadget.speed == USB_SPEED_FULL ? "full speed" : "disconnected"); + + /* registers for device and ep0 */ + seq_printf(m, + "uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n", + udc_get_reg(dev, UICR1), udc_get_reg(dev, UICR0), + udc_get_reg(dev, USIR1), udc_get_reg(dev, USIR0), + udc_get_reg(dev, UFNRH), udc_get_reg(dev, UFNRL)); + + tmp = udc_get_reg(dev, UDCCR); + seq_printf(m, + "udccr %02X =%s%s%s%s%s%s%s%s\n", tmp, + (tmp & UDCCR_REM) ? " rem" : "", + (tmp & UDCCR_RSTIR) ? " rstir" : "", + (tmp & UDCCR_SRM) ? " srm" : "", + (tmp & UDCCR_SUSIR) ? " susir" : "", + (tmp & UDCCR_RESIR) ? " resir" : "", + (tmp & UDCCR_RSM) ? " rsm" : "", + (tmp & UDCCR_UDA) ? " uda" : "", + (tmp & UDCCR_UDE) ? " ude" : ""); + + tmp = udc_ep0_get_UDCCS(dev); + seq_printf(m, + "udccs0 %02X =%s%s%s%s%s%s%s%s\n", tmp, + (tmp & UDCCS0_SA) ? " sa" : "", + (tmp & UDCCS0_RNE) ? " rne" : "", + (tmp & UDCCS0_FST) ? " fst" : "", + (tmp & UDCCS0_SST) ? " sst" : "", + (tmp & UDCCS0_DRWF) ? " dwrf" : "", + (tmp & UDCCS0_FTF) ? " ftf" : "", + (tmp & UDCCS0_IPR) ? " ipr" : "", + (tmp & UDCCS0_OPR) ? " opr" : ""); + + if (dev->has_cfr) { + tmp = udc_get_reg(dev, UDCCFR); + seq_printf(m, + "udccfr %02X =%s%s\n", tmp, + (tmp & UDCCFR_AREN) ? " aren" : "", + (tmp & UDCCFR_ACM) ? " acm" : ""); + } + + if (dev->gadget.speed != USB_SPEED_FULL || !dev->driver) + goto done; + + seq_printf(m, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n", + dev->stats.write.bytes, dev->stats.write.ops, + dev->stats.read.bytes, dev->stats.read.ops, + dev->stats.irqs); + + /* dump endpoint queues */ + for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) { + struct pxa25x_ep *ep = &dev->ep [i]; + struct pxa25x_request *req; + + if (i != 0) { + const struct usb_endpoint_descriptor *desc; + + desc = ep->ep.desc; + if (!desc) + continue; + tmp = udc_ep_get_UDCCS(&dev->ep[i]); + seq_printf(m, + "%s max %d %s udccs %02x irqs %lu\n", + ep->ep.name, usb_endpoint_maxp(desc), + "pio", tmp, ep->pio_irqs); + /* TODO translate all five groups of udccs bits! */ + + } else /* ep0 should only have one transfer queued */ + seq_printf(m, "ep0 max 16 pio irqs %lu\n", + ep->pio_irqs); + + if (list_empty(&ep->queue)) { + seq_printf(m, "\t(nothing queued)\n"); + continue; + } + list_for_each_entry(req, &ep->queue, queue) { + seq_printf(m, + "\treq %p len %d/%d buf %p\n", + &req->req, req->req.actual, + req->req.length, req->req.buf); + } + } + +done: + local_irq_restore(flags); + return 0; +} +DEFINE_SHOW_ATTRIBUTE(udc_debug); + +#define create_debug_files(dev) \ + do { \ + debugfs_create_file(dev->gadget.name, \ + S_IRUGO, NULL, dev, &udc_debug_fops); \ + } while (0) +#define remove_debug_files(dev) debugfs_lookup_and_remove(dev->gadget.name, NULL) + +#else /* !CONFIG_USB_GADGET_DEBUG_FILES */ + +#define create_debug_files(dev) do {} while (0) +#define remove_debug_files(dev) do {} while (0) + +#endif /* CONFIG_USB_GADGET_DEBUG_FILES */ + +/*-------------------------------------------------------------------------*/ + +/* + * udc_disable - disable USB device controller + */ +static void udc_disable(struct pxa25x_udc *dev) +{ + /* block all irqs */ + udc_set_mask_UDCCR(dev, UDCCR_SRM|UDCCR_REM); + udc_set_reg(dev, UICR0, 0xff); + udc_set_reg(dev, UICR1, 0xff); + udc_set_reg(dev, UFNRH, UFNRH_SIM); + + /* if hardware supports it, disconnect from usb */ + pullup_off(); + + udc_clear_mask_UDCCR(dev, UDCCR_UDE); + + ep0_idle (dev); + dev->gadget.speed = USB_SPEED_UNKNOWN; +} + + +/* + * udc_reinit - initialize software state + */ +static void udc_reinit(struct pxa25x_udc *dev) +{ + u32 i; + + /* device/ep0 records init */ + INIT_LIST_HEAD (&dev->gadget.ep_list); + INIT_LIST_HEAD (&dev->gadget.ep0->ep_list); + dev->ep0state = EP0_IDLE; + dev->gadget.quirk_altset_not_supp = 1; + + /* basic endpoint records init */ + for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) { + struct pxa25x_ep *ep = &dev->ep[i]; + + if (i != 0) + list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list); + + ep->ep.desc = NULL; + ep->stopped = 0; + INIT_LIST_HEAD (&ep->queue); + ep->pio_irqs = 0; + usb_ep_set_maxpacket_limit(&ep->ep, ep->ep.maxpacket); + } + + /* the rest was statically initialized, and is read-only */ +} + +/* until it's enabled, this UDC should be completely invisible + * to any USB host. + */ +static void udc_enable (struct pxa25x_udc *dev) +{ + udc_clear_mask_UDCCR(dev, UDCCR_UDE); + + /* try to clear these bits before we enable the udc */ + udc_ack_int_UDCCR(dev, UDCCR_SUSIR|/*UDCCR_RSTIR|*/UDCCR_RESIR); + + ep0_idle(dev); + dev->gadget.speed = USB_SPEED_UNKNOWN; + dev->stats.irqs = 0; + + /* + * sequence taken from chapter 12.5.10, PXA250 AppProcDevManual: + * - enable UDC + * - if RESET is already in progress, ack interrupt + * - unmask reset interrupt + */ + udc_set_mask_UDCCR(dev, UDCCR_UDE); + if (!(udc_get_reg(dev, UDCCR) & UDCCR_UDA)) + udc_ack_int_UDCCR(dev, UDCCR_RSTIR); + + if (dev->has_cfr /* UDC_RES2 is defined */) { + /* pxa255 (a0+) can avoid a set_config race that could + * prevent gadget drivers from configuring correctly + */ + udc_set_reg(dev, UDCCFR, UDCCFR_ACM | UDCCFR_MB1); + } else { + /* "USB test mode" for pxa250 errata 40-42 (stepping a0, a1) + * which could result in missing packets and interrupts. + * supposedly one bit per endpoint, controlling whether it + * double buffers or not; ACM/AREN bits fit into the holes. + * zero bits (like USIR0_IRx) disable double buffering. + */ + udc_set_reg(dev, UDC_RES1, 0x00); + udc_set_reg(dev, UDC_RES2, 0x00); + } + + /* enable suspend/resume and reset irqs */ + udc_clear_mask_UDCCR(dev, UDCCR_SRM | UDCCR_REM); + + /* enable ep0 irqs */ + udc_set_reg(dev, UICR0, udc_get_reg(dev, UICR0) & ~UICR0_IM0); + + /* if hardware supports it, pullup D+ and wait for reset */ + pullup_on(); +} + + +/* when a driver is successfully registered, it will receive + * control requests including set_configuration(), which enables + * non-control requests. then usb traffic follows until a + * disconnect is reported. then a host may connect again, or + * the driver might get unbound. + */ +static int pxa25x_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) +{ + struct pxa25x_udc *dev = to_pxa25x(g); + int retval; + + /* first hook up the driver ... */ + dev->driver = driver; + dev->pullup = 1; + + /* ... then enable host detection and ep0; and we're ready + * for set_configuration as well as eventual disconnect. + */ + /* connect to bus through transceiver */ + if (!IS_ERR_OR_NULL(dev->transceiver)) { + retval = otg_set_peripheral(dev->transceiver->otg, + &dev->gadget); + if (retval) + goto bind_fail; + } + + dump_state(dev); + return 0; +bind_fail: + return retval; +} + +static void +reset_gadget(struct pxa25x_udc *dev, struct usb_gadget_driver *driver) +{ + int i; + + /* don't disconnect drivers more than once */ + if (dev->gadget.speed == USB_SPEED_UNKNOWN) + driver = NULL; + dev->gadget.speed = USB_SPEED_UNKNOWN; + + /* prevent new request submissions, kill any outstanding requests */ + for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) { + struct pxa25x_ep *ep = &dev->ep[i]; + + ep->stopped = 1; + nuke(ep, -ESHUTDOWN); + } + del_timer_sync(&dev->timer); + + /* report reset; the driver is already quiesced */ + if (driver) + usb_gadget_udc_reset(&dev->gadget, driver); + + /* re-init driver-visible data structures */ + udc_reinit(dev); +} + +static void +stop_activity(struct pxa25x_udc *dev, struct usb_gadget_driver *driver) +{ + int i; + + /* don't disconnect drivers more than once */ + if (dev->gadget.speed == USB_SPEED_UNKNOWN) + driver = NULL; + dev->gadget.speed = USB_SPEED_UNKNOWN; + + /* prevent new request submissions, kill any outstanding requests */ + for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) { + struct pxa25x_ep *ep = &dev->ep[i]; + + ep->stopped = 1; + nuke(ep, -ESHUTDOWN); + } + del_timer_sync(&dev->timer); + + /* report disconnect; the driver is already quiesced */ + if (driver) + driver->disconnect(&dev->gadget); + + /* re-init driver-visible data structures */ + udc_reinit(dev); +} + +static int pxa25x_udc_stop(struct usb_gadget*g) +{ + struct pxa25x_udc *dev = to_pxa25x(g); + + local_irq_disable(); + dev->pullup = 0; + stop_activity(dev, NULL); + local_irq_enable(); + + if (!IS_ERR_OR_NULL(dev->transceiver)) + (void) otg_set_peripheral(dev->transceiver->otg, NULL); + + dev->driver = NULL; + + dump_state(dev); + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_ARCH_LUBBOCK + +/* Lubbock has separate connect and disconnect irqs. More typical designs + * use one GPIO as the VBUS IRQ, and another to control the D+ pullup. + */ + +static irqreturn_t +lubbock_vbus_irq(int irq, void *_dev) +{ + struct pxa25x_udc *dev = _dev; + int vbus; + + dev->stats.irqs++; + if (irq == dev->usb_irq) { + vbus = 1; + disable_irq(dev->usb_irq); + enable_irq(dev->usb_disc_irq); + } else if (irq == dev->usb_disc_irq) { + vbus = 0; + disable_irq(dev->usb_disc_irq); + enable_irq(dev->usb_irq); + } else { + return IRQ_NONE; + } + + pxa25x_udc_vbus_session(&dev->gadget, vbus); + return IRQ_HANDLED; +} + +#endif + + +/*-------------------------------------------------------------------------*/ + +static inline void clear_ep_state (struct pxa25x_udc *dev) +{ + unsigned i; + + /* hardware SET_{CONFIGURATION,INTERFACE} automagic resets endpoint + * fifos, and pending transactions mustn't be continued in any case. + */ + for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++) + nuke(&dev->ep[i], -ECONNABORTED); +} + +static void udc_watchdog(struct timer_list *t) +{ + struct pxa25x_udc *dev = from_timer(dev, t, timer); + + local_irq_disable(); + if (dev->ep0state == EP0_STALL + && (udc_ep0_get_UDCCS(dev) & UDCCS0_FST) == 0 + && (udc_ep0_get_UDCCS(dev) & UDCCS0_SST) == 0) { + udc_ep0_set_UDCCS(dev, UDCCS0_FST|UDCCS0_FTF); + DBG(DBG_VERBOSE, "ep0 re-stall\n"); + start_watchdog(dev); + } + local_irq_enable(); +} + +static void handle_ep0 (struct pxa25x_udc *dev) +{ + u32 udccs0 = udc_ep0_get_UDCCS(dev); + struct pxa25x_ep *ep = &dev->ep [0]; + struct pxa25x_request *req; + union { + struct usb_ctrlrequest r; + u8 raw [8]; + u32 word [2]; + } u; + + if (list_empty(&ep->queue)) + req = NULL; + else + req = list_entry(ep->queue.next, struct pxa25x_request, queue); + + /* clear stall status */ + if (udccs0 & UDCCS0_SST) { + nuke(ep, -EPIPE); + udc_ep0_set_UDCCS(dev, UDCCS0_SST); + del_timer(&dev->timer); + ep0_idle(dev); + } + + /* previous request unfinished? non-error iff back-to-back ... */ + if ((udccs0 & UDCCS0_SA) != 0 && dev->ep0state != EP0_IDLE) { + nuke(ep, 0); + del_timer(&dev->timer); + ep0_idle(dev); + } + + switch (dev->ep0state) { + case EP0_IDLE: + /* late-breaking status? */ + udccs0 = udc_ep0_get_UDCCS(dev); + + /* start control request? */ + if (likely((udccs0 & (UDCCS0_OPR|UDCCS0_SA|UDCCS0_RNE)) + == (UDCCS0_OPR|UDCCS0_SA|UDCCS0_RNE))) { + int i; + + nuke (ep, -EPROTO); + + /* read SETUP packet */ + for (i = 0; i < 8; i++) { + if (unlikely(!(udc_ep0_get_UDCCS(dev) & UDCCS0_RNE))) { +bad_setup: + DMSG("SETUP %d!\n", i); + goto stall; + } + u.raw [i] = (u8) UDDR0; + } + if (unlikely((udc_ep0_get_UDCCS(dev) & UDCCS0_RNE) != 0)) + goto bad_setup; + +got_setup: + DBG(DBG_VERBOSE, "SETUP %02x.%02x v%04x i%04x l%04x\n", + u.r.bRequestType, u.r.bRequest, + le16_to_cpu(u.r.wValue), + le16_to_cpu(u.r.wIndex), + le16_to_cpu(u.r.wLength)); + + /* cope with automagic for some standard requests. */ + dev->req_std = (u.r.bRequestType & USB_TYPE_MASK) + == USB_TYPE_STANDARD; + dev->req_config = 0; + dev->req_pending = 1; + switch (u.r.bRequest) { + /* hardware restricts gadget drivers here! */ + case USB_REQ_SET_CONFIGURATION: + if (u.r.bRequestType == USB_RECIP_DEVICE) { + /* reflect hardware's automagic + * up to the gadget driver. + */ +config_change: + dev->req_config = 1; + clear_ep_state(dev); + /* if !has_cfr, there's no synch + * else use AREN (later) not SA|OPR + * USIR0_IR0 acts edge sensitive + */ + } + break; + /* ... and here, even more ... */ + case USB_REQ_SET_INTERFACE: + if (u.r.bRequestType == USB_RECIP_INTERFACE) { + /* udc hardware is broken by design: + * - altsetting may only be zero; + * - hw resets all interfaces' eps; + * - ep reset doesn't include halt(?). + */ + DMSG("broken set_interface (%d/%d)\n", + le16_to_cpu(u.r.wIndex), + le16_to_cpu(u.r.wValue)); + goto config_change; + } + break; + /* hardware was supposed to hide this */ + case USB_REQ_SET_ADDRESS: + if (u.r.bRequestType == USB_RECIP_DEVICE) { + ep0start(dev, 0, "address"); + return; + } + break; + } + + if (u.r.bRequestType & USB_DIR_IN) + dev->ep0state = EP0_IN_DATA_PHASE; + else + dev->ep0state = EP0_OUT_DATA_PHASE; + + i = dev->driver->setup(&dev->gadget, &u.r); + if (i < 0) { + /* hardware automagic preventing STALL... */ + if (dev->req_config) { + /* hardware sometimes neglects to tell + * tell us about config change events, + * so later ones may fail... + */ + WARNING("config change %02x fail %d?\n", + u.r.bRequest, i); + return; + /* TODO experiment: if has_cfr, + * hardware didn't ACK; maybe we + * could actually STALL! + */ + } + DBG(DBG_VERBOSE, "protocol STALL, " + "%02x err %d\n", udc_ep0_get_UDCCS(dev), i); +stall: + /* the watchdog timer helps deal with cases + * where udc seems to clear FST wrongly, and + * then NAKs instead of STALLing. + */ + ep0start(dev, UDCCS0_FST|UDCCS0_FTF, "stall"); + start_watchdog(dev); + dev->ep0state = EP0_STALL; + + /* deferred i/o == no response yet */ + } else if (dev->req_pending) { + if (likely(dev->ep0state == EP0_IN_DATA_PHASE + || dev->req_std || u.r.wLength)) + ep0start(dev, 0, "defer"); + else + ep0start(dev, UDCCS0_IPR, "defer/IPR"); + } + + /* expect at least one data or status stage irq */ + return; + + } else if (likely((udccs0 & (UDCCS0_OPR|UDCCS0_SA)) + == (UDCCS0_OPR|UDCCS0_SA))) { + unsigned i; + + /* pxa210/250 erratum 131 for B0/B1 says RNE lies. + * still observed on a pxa255 a0. + */ + DBG(DBG_VERBOSE, "e131\n"); + nuke(ep, -EPROTO); + + /* read SETUP data, but don't trust it too much */ + for (i = 0; i < 8; i++) + u.raw [i] = (u8) UDDR0; + if ((u.r.bRequestType & USB_RECIP_MASK) + > USB_RECIP_OTHER) + goto stall; + if (u.word [0] == 0 && u.word [1] == 0) + goto stall; + goto got_setup; + } else { + /* some random early IRQ: + * - we acked FST + * - IPR cleared + * - OPR got set, without SA (likely status stage) + */ + udc_ep0_set_UDCCS(dev, udccs0 & (UDCCS0_SA|UDCCS0_OPR)); + } + break; + case EP0_IN_DATA_PHASE: /* GET_DESCRIPTOR etc */ + if (udccs0 & UDCCS0_OPR) { + udc_ep0_set_UDCCS(dev, UDCCS0_OPR|UDCCS0_FTF); + DBG(DBG_VERBOSE, "ep0in premature status\n"); + if (req) + done(ep, req, 0); + ep0_idle(dev); + } else /* irq was IPR clearing */ { + if (req) { + /* this IN packet might finish the request */ + (void) write_ep0_fifo(ep, req); + } /* else IN token before response was written */ + } + break; + case EP0_OUT_DATA_PHASE: /* SET_DESCRIPTOR etc */ + if (udccs0 & UDCCS0_OPR) { + if (req) { + /* this OUT packet might finish the request */ + if (read_ep0_fifo(ep, req)) + done(ep, req, 0); + /* else more OUT packets expected */ + } /* else OUT token before read was issued */ + } else /* irq was IPR clearing */ { + DBG(DBG_VERBOSE, "ep0out premature status\n"); + if (req) + done(ep, req, 0); + ep0_idle(dev); + } + break; + case EP0_END_XFER: + if (req) + done(ep, req, 0); + /* ack control-IN status (maybe in-zlp was skipped) + * also appears after some config change events. + */ + if (udccs0 & UDCCS0_OPR) + udc_ep0_set_UDCCS(dev, UDCCS0_OPR); + ep0_idle(dev); + break; + case EP0_STALL: + udc_ep0_set_UDCCS(dev, UDCCS0_FST); + break; + } + udc_set_reg(dev, USIR0, USIR0_IR0); +} + +static void handle_ep(struct pxa25x_ep *ep) +{ + struct pxa25x_request *req; + int is_in = ep->bEndpointAddress & USB_DIR_IN; + int completed; + u32 udccs, tmp; + + do { + completed = 0; + if (likely (!list_empty(&ep->queue))) + req = list_entry(ep->queue.next, + struct pxa25x_request, queue); + else + req = NULL; + + // TODO check FST handling + + udccs = udc_ep_get_UDCCS(ep); + if (unlikely(is_in)) { /* irq from TPC, SST, or (ISO) TUR */ + tmp = UDCCS_BI_TUR; + if (likely(ep->bmAttributes == USB_ENDPOINT_XFER_BULK)) + tmp |= UDCCS_BI_SST; + tmp &= udccs; + if (likely (tmp)) + udc_ep_set_UDCCS(ep, tmp); + if (req && likely ((udccs & UDCCS_BI_TFS) != 0)) + completed = write_fifo(ep, req); + + } else { /* irq from RPC (or for ISO, ROF) */ + if (likely(ep->bmAttributes == USB_ENDPOINT_XFER_BULK)) + tmp = UDCCS_BO_SST | UDCCS_BO_DME; + else + tmp = UDCCS_IO_ROF | UDCCS_IO_DME; + tmp &= udccs; + if (likely(tmp)) + udc_ep_set_UDCCS(ep, tmp); + + /* fifos can hold packets, ready for reading... */ + if (likely(req)) { + completed = read_fifo(ep, req); + } else + pio_irq_disable(ep); + } + ep->pio_irqs++; + } while (completed); +} + +/* + * pxa25x_udc_irq - interrupt handler + * + * avoid delays in ep0 processing. the control handshaking isn't always + * under software control (pxa250c0 and the pxa255 are better), and delays + * could cause usb protocol errors. + */ +static irqreturn_t +pxa25x_udc_irq(int irq, void *_dev) +{ + struct pxa25x_udc *dev = _dev; + int handled; + + dev->stats.irqs++; + do { + u32 udccr = udc_get_reg(dev, UDCCR); + + handled = 0; + + /* SUSpend Interrupt Request */ + if (unlikely(udccr & UDCCR_SUSIR)) { + udc_ack_int_UDCCR(dev, UDCCR_SUSIR); + handled = 1; + DBG(DBG_VERBOSE, "USB suspend\n"); + + if (dev->gadget.speed != USB_SPEED_UNKNOWN + && dev->driver + && dev->driver->suspend) + dev->driver->suspend(&dev->gadget); + ep0_idle (dev); + } + + /* RESume Interrupt Request */ + if (unlikely(udccr & UDCCR_RESIR)) { + udc_ack_int_UDCCR(dev, UDCCR_RESIR); + handled = 1; + DBG(DBG_VERBOSE, "USB resume\n"); + + if (dev->gadget.speed != USB_SPEED_UNKNOWN + && dev->driver + && dev->driver->resume) + dev->driver->resume(&dev->gadget); + } + + /* ReSeT Interrupt Request - USB reset */ + if (unlikely(udccr & UDCCR_RSTIR)) { + udc_ack_int_UDCCR(dev, UDCCR_RSTIR); + handled = 1; + + if ((udc_get_reg(dev, UDCCR) & UDCCR_UDA) == 0) { + DBG(DBG_VERBOSE, "USB reset start\n"); + + /* reset driver and endpoints, + * in case that's not yet done + */ + reset_gadget(dev, dev->driver); + + } else { + DBG(DBG_VERBOSE, "USB reset end\n"); + dev->gadget.speed = USB_SPEED_FULL; + memset(&dev->stats, 0, sizeof dev->stats); + /* driver and endpoints are still reset */ + } + + } else { + u32 usir0 = udc_get_reg(dev, USIR0) & + ~udc_get_reg(dev, UICR0); + u32 usir1 = udc_get_reg(dev, USIR1) & + ~udc_get_reg(dev, UICR1); + int i; + + if (unlikely (!usir0 && !usir1)) + continue; + + DBG(DBG_VERY_NOISY, "irq %02x.%02x\n", usir1, usir0); + + /* control traffic */ + if (usir0 & USIR0_IR0) { + dev->ep[0].pio_irqs++; + handle_ep0(dev); + handled = 1; + } + + /* endpoint data transfers */ + for (i = 0; i < 8; i++) { + u32 tmp = 1 << i; + + if (i && (usir0 & tmp)) { + handle_ep(&dev->ep[i]); + udc_set_reg(dev, USIR0, + udc_get_reg(dev, USIR0) | tmp); + handled = 1; + } +#ifndef CONFIG_USB_PXA25X_SMALL + if (usir1 & tmp) { + handle_ep(&dev->ep[i+8]); + udc_set_reg(dev, USIR1, + udc_get_reg(dev, USIR1) | tmp); + handled = 1; + } +#endif + } + } + + /* we could also ask for 1 msec SOF (SIR) interrupts */ + + } while (handled); + return IRQ_HANDLED; +} + +/*-------------------------------------------------------------------------*/ + +static void nop_release (struct device *dev) +{ + DMSG("%s %s\n", __func__, dev_name(dev)); +} + +/* this uses load-time allocation and initialization (instead of + * doing it at run-time) to save code, eliminate fault paths, and + * be more obviously correct. + */ +static struct pxa25x_udc memory = { + .gadget = { + .ops = &pxa25x_udc_ops, + .ep0 = &memory.ep[0].ep, + .name = driver_name, + .dev = { + .init_name = "gadget", + .release = nop_release, + }, + }, + + /* control endpoint */ + .ep[0] = { + .ep = { + .name = ep0name, + .ops = &pxa25x_ep_ops, + .maxpacket = EP0_FIFO_SIZE, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, + USB_EP_CAPS_DIR_ALL), + }, + .dev = &memory, + .regoff_udccs = UDCCS0, + .regoff_uddr = UDDR0, + }, + + /* first group of endpoints */ + .ep[1] = { + .ep = { + .name = "ep1in-bulk", + .ops = &pxa25x_ep_ops, + .maxpacket = BULK_FIFO_SIZE, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, + USB_EP_CAPS_DIR_IN), + }, + .dev = &memory, + .fifo_size = BULK_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 1, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .regoff_udccs = UDCCS1, + .regoff_uddr = UDDR1, + }, + .ep[2] = { + .ep = { + .name = "ep2out-bulk", + .ops = &pxa25x_ep_ops, + .maxpacket = BULK_FIFO_SIZE, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, + USB_EP_CAPS_DIR_OUT), + }, + .dev = &memory, + .fifo_size = BULK_FIFO_SIZE, + .bEndpointAddress = 2, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .regoff_udccs = UDCCS2, + .regoff_ubcr = UBCR2, + .regoff_uddr = UDDR2, + }, +#ifndef CONFIG_USB_PXA25X_SMALL + .ep[3] = { + .ep = { + .name = "ep3in-iso", + .ops = &pxa25x_ep_ops, + .maxpacket = ISO_FIFO_SIZE, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, + USB_EP_CAPS_DIR_IN), + }, + .dev = &memory, + .fifo_size = ISO_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 3, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .regoff_udccs = UDCCS3, + .regoff_uddr = UDDR3, + }, + .ep[4] = { + .ep = { + .name = "ep4out-iso", + .ops = &pxa25x_ep_ops, + .maxpacket = ISO_FIFO_SIZE, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, + USB_EP_CAPS_DIR_OUT), + }, + .dev = &memory, + .fifo_size = ISO_FIFO_SIZE, + .bEndpointAddress = 4, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .regoff_udccs = UDCCS4, + .regoff_ubcr = UBCR4, + .regoff_uddr = UDDR4, + }, + .ep[5] = { + .ep = { + .name = "ep5in-int", + .ops = &pxa25x_ep_ops, + .maxpacket = INT_FIFO_SIZE, + .caps = USB_EP_CAPS(0, 0), + }, + .dev = &memory, + .fifo_size = INT_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 5, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .regoff_udccs = UDCCS5, + .regoff_uddr = UDDR5, + }, + + /* second group of endpoints */ + .ep[6] = { + .ep = { + .name = "ep6in-bulk", + .ops = &pxa25x_ep_ops, + .maxpacket = BULK_FIFO_SIZE, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, + USB_EP_CAPS_DIR_IN), + }, + .dev = &memory, + .fifo_size = BULK_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 6, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .regoff_udccs = UDCCS6, + .regoff_uddr = UDDR6, + }, + .ep[7] = { + .ep = { + .name = "ep7out-bulk", + .ops = &pxa25x_ep_ops, + .maxpacket = BULK_FIFO_SIZE, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, + USB_EP_CAPS_DIR_OUT), + }, + .dev = &memory, + .fifo_size = BULK_FIFO_SIZE, + .bEndpointAddress = 7, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .regoff_udccs = UDCCS7, + .regoff_ubcr = UBCR7, + .regoff_uddr = UDDR7, + }, + .ep[8] = { + .ep = { + .name = "ep8in-iso", + .ops = &pxa25x_ep_ops, + .maxpacket = ISO_FIFO_SIZE, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, + USB_EP_CAPS_DIR_IN), + }, + .dev = &memory, + .fifo_size = ISO_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 8, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .regoff_udccs = UDCCS8, + .regoff_uddr = UDDR8, + }, + .ep[9] = { + .ep = { + .name = "ep9out-iso", + .ops = &pxa25x_ep_ops, + .maxpacket = ISO_FIFO_SIZE, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, + USB_EP_CAPS_DIR_OUT), + }, + .dev = &memory, + .fifo_size = ISO_FIFO_SIZE, + .bEndpointAddress = 9, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .regoff_udccs = UDCCS9, + .regoff_ubcr = UBCR9, + .regoff_uddr = UDDR9, + }, + .ep[10] = { + .ep = { + .name = "ep10in-int", + .ops = &pxa25x_ep_ops, + .maxpacket = INT_FIFO_SIZE, + .caps = USB_EP_CAPS(0, 0), + }, + .dev = &memory, + .fifo_size = INT_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 10, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .regoff_udccs = UDCCS10, + .regoff_uddr = UDDR10, + }, + + /* third group of endpoints */ + .ep[11] = { + .ep = { + .name = "ep11in-bulk", + .ops = &pxa25x_ep_ops, + .maxpacket = BULK_FIFO_SIZE, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, + USB_EP_CAPS_DIR_IN), + }, + .dev = &memory, + .fifo_size = BULK_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 11, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .regoff_udccs = UDCCS11, + .regoff_uddr = UDDR11, + }, + .ep[12] = { + .ep = { + .name = "ep12out-bulk", + .ops = &pxa25x_ep_ops, + .maxpacket = BULK_FIFO_SIZE, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, + USB_EP_CAPS_DIR_OUT), + }, + .dev = &memory, + .fifo_size = BULK_FIFO_SIZE, + .bEndpointAddress = 12, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .regoff_udccs = UDCCS12, + .regoff_ubcr = UBCR12, + .regoff_uddr = UDDR12, + }, + .ep[13] = { + .ep = { + .name = "ep13in-iso", + .ops = &pxa25x_ep_ops, + .maxpacket = ISO_FIFO_SIZE, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, + USB_EP_CAPS_DIR_IN), + }, + .dev = &memory, + .fifo_size = ISO_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 13, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .regoff_udccs = UDCCS13, + .regoff_uddr = UDDR13, + }, + .ep[14] = { + .ep = { + .name = "ep14out-iso", + .ops = &pxa25x_ep_ops, + .maxpacket = ISO_FIFO_SIZE, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, + USB_EP_CAPS_DIR_OUT), + }, + .dev = &memory, + .fifo_size = ISO_FIFO_SIZE, + .bEndpointAddress = 14, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .regoff_udccs = UDCCS14, + .regoff_ubcr = UBCR14, + .regoff_uddr = UDDR14, + }, + .ep[15] = { + .ep = { + .name = "ep15in-int", + .ops = &pxa25x_ep_ops, + .maxpacket = INT_FIFO_SIZE, + .caps = USB_EP_CAPS(0, 0), + }, + .dev = &memory, + .fifo_size = INT_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 15, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .regoff_udccs = UDCCS15, + .regoff_uddr = UDDR15, + }, +#endif /* !CONFIG_USB_PXA25X_SMALL */ +}; + +#define CP15R0_VENDOR_MASK 0xffffe000 + +#if defined(CONFIG_ARCH_PXA) +#define CP15R0_XSCALE_VALUE 0x69052000 /* intel/arm/xscale */ + +#elif defined(CONFIG_ARCH_IXP4XX) +#define CP15R0_XSCALE_VALUE 0x69054000 /* intel/arm/ixp4xx */ + +#endif + +#define CP15R0_PROD_MASK 0x000003f0 +#define PXA25x 0x00000100 /* and PXA26x */ +#define PXA210 0x00000120 + +#define CP15R0_REV_MASK 0x0000000f + +#define CP15R0_PRODREV_MASK (CP15R0_PROD_MASK | CP15R0_REV_MASK) + +#define PXA255_A0 0x00000106 /* or PXA260_B1 */ +#define PXA250_C0 0x00000105 /* or PXA26x_B0 */ +#define PXA250_B2 0x00000104 +#define PXA250_B1 0x00000103 /* or PXA260_A0 */ +#define PXA250_B0 0x00000102 +#define PXA250_A1 0x00000101 +#define PXA250_A0 0x00000100 + +#define PXA210_C0 0x00000125 +#define PXA210_B2 0x00000124 +#define PXA210_B1 0x00000123 +#define PXA210_B0 0x00000122 +#define IXP425_A0 0x000001c1 +#define IXP425_B0 0x000001f1 +#define IXP465_AD 0x00000200 + +/* + * probe - binds to the platform device + */ +static int pxa25x_udc_probe(struct platform_device *pdev) +{ + struct pxa25x_udc *dev = &memory; + int retval, irq; + u32 chiprev; + + pr_info("%s: version %s\n", driver_name, DRIVER_VERSION); + + /* insist on Intel/ARM/XScale */ + asm("mrc p15, 0, %0, c0, c0" : "=r" (chiprev)); + if ((chiprev & CP15R0_VENDOR_MASK) != CP15R0_XSCALE_VALUE) { + pr_err("%s: not XScale!\n", driver_name); + return -ENODEV; + } + + /* trigger chiprev-specific logic */ + switch (chiprev & CP15R0_PRODREV_MASK) { +#if defined(CONFIG_ARCH_PXA) + case PXA255_A0: + dev->has_cfr = 1; + break; + case PXA250_A0: + case PXA250_A1: + /* A0/A1 "not released"; ep 13, 15 unusable */ + fallthrough; + case PXA250_B2: case PXA210_B2: + case PXA250_B1: case PXA210_B1: + case PXA250_B0: case PXA210_B0: + /* OUT-DMA is broken ... */ + fallthrough; + case PXA250_C0: case PXA210_C0: + break; +#elif defined(CONFIG_ARCH_IXP4XX) + case IXP425_A0: + case IXP425_B0: + case IXP465_AD: + dev->has_cfr = 1; + break; +#endif + default: + pr_err("%s: unrecognized processor: %08x\n", + driver_name, chiprev); + /* iop3xx, ixp4xx, ... */ + return -ENODEV; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + dev->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(dev->regs)) + return PTR_ERR(dev->regs); + + dev->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(dev->clk)) + return PTR_ERR(dev->clk); + + pr_debug("%s: IRQ %d%s%s\n", driver_name, irq, + dev->has_cfr ? "" : " (!cfr)", + SIZE_STR "(pio)" + ); + + /* other non-static parts of init */ + dev->dev = &pdev->dev; + dev->mach = dev_get_platdata(&pdev->dev); + + dev->transceiver = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); + + if (gpio_is_valid(dev->mach->gpio_pullup)) { + retval = devm_gpio_request(&pdev->dev, dev->mach->gpio_pullup, + "pca25x_udc GPIO PULLUP"); + if (retval) { + dev_dbg(&pdev->dev, + "can't get pullup gpio %d, err: %d\n", + dev->mach->gpio_pullup, retval); + goto err; + } + gpio_direction_output(dev->mach->gpio_pullup, 0); + } + + timer_setup(&dev->timer, udc_watchdog, 0); + + the_controller = dev; + platform_set_drvdata(pdev, dev); + + udc_disable(dev); + udc_reinit(dev); + + dev->vbus = 0; + + /* irq setup after old hardware state is cleaned up */ + retval = devm_request_irq(&pdev->dev, irq, pxa25x_udc_irq, 0, + driver_name, dev); + if (retval != 0) { + pr_err("%s: can't get irq %d, err %d\n", + driver_name, irq, retval); + goto err; + } + dev->got_irq = 1; + +#ifdef CONFIG_ARCH_LUBBOCK + if (machine_is_lubbock()) { + dev->usb_irq = platform_get_irq(pdev, 1); + if (dev->usb_irq < 0) + return dev->usb_irq; + + dev->usb_disc_irq = platform_get_irq(pdev, 2); + if (dev->usb_disc_irq < 0) + return dev->usb_disc_irq; + + retval = devm_request_irq(&pdev->dev, dev->usb_disc_irq, + lubbock_vbus_irq, 0, driver_name, + dev); + if (retval != 0) { + pr_err("%s: can't get irq %i, err %d\n", + driver_name, dev->usb_disc_irq, retval); + goto err; + } + retval = devm_request_irq(&pdev->dev, dev->usb_irq, + lubbock_vbus_irq, 0, driver_name, + dev); + if (retval != 0) { + pr_err("%s: can't get irq %i, err %d\n", + driver_name, dev->usb_irq, retval); + goto err; + } + } else +#endif + create_debug_files(dev); + + retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget); + if (!retval) + return retval; + + remove_debug_files(dev); + err: + if (!IS_ERR_OR_NULL(dev->transceiver)) + dev->transceiver = NULL; + return retval; +} + +static void pxa25x_udc_shutdown(struct platform_device *_dev) +{ + pullup_off(); +} + +static int pxa25x_udc_remove(struct platform_device *pdev) +{ + struct pxa25x_udc *dev = platform_get_drvdata(pdev); + + if (dev->driver) + return -EBUSY; + + usb_del_gadget_udc(&dev->gadget); + dev->pullup = 0; + pullup(dev); + + remove_debug_files(dev); + + if (!IS_ERR_OR_NULL(dev->transceiver)) + dev->transceiver = NULL; + + the_controller = NULL; + return 0; +} + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_PM + +/* USB suspend (controlled by the host) and system suspend (controlled + * by the PXA) don't necessarily work well together. If USB is active, + * the 48 MHz clock is required; so the system can't enter 33 MHz idle + * mode, or any deeper PM saving state. + * + * For now, we punt and forcibly disconnect from the USB host when PXA + * enters any suspend state. While we're disconnected, we always disable + * the 48MHz USB clock ... allowing PXA sleep and/or 33 MHz idle states. + * Boards without software pullup control shouldn't use those states. + * VBUS IRQs should probably be ignored so that the PXA device just acts + * "dead" to USB hosts until system resume. + */ +static int pxa25x_udc_suspend(struct platform_device *dev, pm_message_t state) +{ + struct pxa25x_udc *udc = platform_get_drvdata(dev); + unsigned long flags; + + if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command) + WARNING("USB host won't detect disconnect!\n"); + udc->suspended = 1; + + local_irq_save(flags); + pullup(udc); + local_irq_restore(flags); + + return 0; +} + +static int pxa25x_udc_resume(struct platform_device *dev) +{ + struct pxa25x_udc *udc = platform_get_drvdata(dev); + unsigned long flags; + + udc->suspended = 0; + local_irq_save(flags); + pullup(udc); + local_irq_restore(flags); + + return 0; +} + +#else +#define pxa25x_udc_suspend NULL +#define pxa25x_udc_resume NULL +#endif + +/*-------------------------------------------------------------------------*/ + +static struct platform_driver udc_driver = { + .shutdown = pxa25x_udc_shutdown, + .probe = pxa25x_udc_probe, + .remove = pxa25x_udc_remove, + .suspend = pxa25x_udc_suspend, + .resume = pxa25x_udc_resume, + .driver = { + .name = "pxa25x-udc", + }, +}; + +module_platform_driver(udc_driver); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pxa25x-udc"); diff --git a/drivers/usb/gadget/udc/pxa25x_udc.h b/drivers/usb/gadget/udc/pxa25x_udc.h new file mode 100644 index 000000000..6ab6047ed --- /dev/null +++ b/drivers/usb/gadget/udc/pxa25x_udc.h @@ -0,0 +1,243 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Intel PXA25x on-chip full speed USB device controller + * + * Copyright (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix + * Copyright (C) 2003 David Brownell + */ + +#ifndef __LINUX_USB_GADGET_PXA25X_H +#define __LINUX_USB_GADGET_PXA25X_H + +#include <linux/types.h> + +/*-------------------------------------------------------------------------*/ + +/* pxa25x has this (move to include/asm-arm/arch-pxa/pxa-regs.h) */ +#define UFNRH_SIR (1 << 7) /* SOF interrupt request */ +#define UFNRH_SIM (1 << 6) /* SOF interrupt mask */ +#define UFNRH_IPE14 (1 << 5) /* ISO packet error, ep14 */ +#define UFNRH_IPE9 (1 << 4) /* ISO packet error, ep9 */ +#define UFNRH_IPE4 (1 << 3) /* ISO packet error, ep4 */ + +/* pxa255 has this (move to include/asm-arm/arch-pxa/pxa-regs.h) */ +#define UDCCFR UDC_RES2 /* UDC Control Function Register */ +#define UDCCFR_AREN (1 << 7) /* ACK response enable (now) */ +#define UDCCFR_ACM (1 << 2) /* ACK control mode (wait for AREN) */ + +/* latest pxa255 errata define new "must be one" bits in UDCCFR */ +#define UDCCFR_MB1 (0xff & ~(UDCCFR_AREN|UDCCFR_ACM)) + +/*-------------------------------------------------------------------------*/ + +struct pxa25x_udc; + +struct pxa25x_ep { + struct usb_ep ep; + struct pxa25x_udc *dev; + + struct list_head queue; + unsigned long pio_irqs; + + unsigned short fifo_size; + u8 bEndpointAddress; + u8 bmAttributes; + + unsigned stopped : 1; + unsigned dma_fixup : 1; + + /* UDCCS = UDC Control/Status for this EP + * UBCR = UDC Byte Count Remaining (contents of OUT fifo) + * UDDR = UDC Endpoint Data Register (the fifo) + * DRCM = DMA Request Channel Map + */ + u32 regoff_udccs; + u32 regoff_ubcr; + u32 regoff_uddr; +}; + +struct pxa25x_request { + struct usb_request req; + struct list_head queue; +}; + +enum ep0_state { + EP0_IDLE, + EP0_IN_DATA_PHASE, + EP0_OUT_DATA_PHASE, + EP0_END_XFER, + EP0_STALL, +}; + +#define EP0_FIFO_SIZE ((unsigned)16) +#define BULK_FIFO_SIZE ((unsigned)64) +#define ISO_FIFO_SIZE ((unsigned)256) +#define INT_FIFO_SIZE ((unsigned)8) + +struct udc_stats { + struct ep0stats { + unsigned long ops; + unsigned long bytes; + } read, write; + unsigned long irqs; +}; + +#ifdef CONFIG_USB_PXA25X_SMALL +/* when memory's tight, SMALL config saves code+data. */ +#define PXA_UDC_NUM_ENDPOINTS 3 +#endif + +#ifndef PXA_UDC_NUM_ENDPOINTS +#define PXA_UDC_NUM_ENDPOINTS 16 +#endif + +struct pxa25x_udc { + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + + enum ep0_state ep0state; + struct udc_stats stats; + unsigned got_irq : 1, + vbus : 1, + pullup : 1, + has_cfr : 1, + req_pending : 1, + req_std : 1, + req_config : 1, + suspended : 1, + active : 1; + +#define start_watchdog(dev) mod_timer(&dev->timer, jiffies + (HZ/200)) + struct timer_list timer; + + struct device *dev; + struct clk *clk; + struct pxa2xx_udc_mach_info *mach; + struct usb_phy *transceiver; + u64 dma_mask; + struct pxa25x_ep ep [PXA_UDC_NUM_ENDPOINTS]; + void __iomem *regs; + int usb_irq; + int usb_disc_irq; +}; +#define to_pxa25x(g) (container_of((g), struct pxa25x_udc, gadget)) + +/*-------------------------------------------------------------------------*/ + +static struct pxa25x_udc *the_controller; + +/*-------------------------------------------------------------------------*/ + +/* + * Debugging support vanishes in non-debug builds. DBG_NORMAL should be + * mostly silent during normal use/testing, with no timing side-effects. + */ +#define DBG_NORMAL 1 /* error paths, device state transitions */ +#define DBG_VERBOSE 2 /* add some success path trace info */ +#define DBG_NOISY 3 /* ... even more: request level */ +#define DBG_VERY_NOISY 4 /* ... even more: packet level */ + +#define DMSG(stuff...) pr_debug("udc: " stuff) + +#ifdef DEBUG + +static const char *state_name[] = { + "EP0_IDLE", + "EP0_IN_DATA_PHASE", "EP0_OUT_DATA_PHASE", + "EP0_END_XFER", "EP0_STALL" +}; + +#ifdef VERBOSE_DEBUG +# define UDC_DEBUG DBG_VERBOSE +#else +# define UDC_DEBUG DBG_NORMAL +#endif + +static void __maybe_unused +dump_udccr(const char *label) +{ + u32 udccr = UDCCR; + DMSG("%s %02X =%s%s%s%s%s%s%s%s\n", + label, udccr, + (udccr & UDCCR_REM) ? " rem" : "", + (udccr & UDCCR_RSTIR) ? " rstir" : "", + (udccr & UDCCR_SRM) ? " srm" : "", + (udccr & UDCCR_SUSIR) ? " susir" : "", + (udccr & UDCCR_RESIR) ? " resir" : "", + (udccr & UDCCR_RSM) ? " rsm" : "", + (udccr & UDCCR_UDA) ? " uda" : "", + (udccr & UDCCR_UDE) ? " ude" : ""); +} + +static void __maybe_unused +dump_udccs0(const char *label) +{ + u32 udccs0 = UDCCS0; + + DMSG("%s %s %02X =%s%s%s%s%s%s%s%s\n", + label, state_name[the_controller->ep0state], udccs0, + (udccs0 & UDCCS0_SA) ? " sa" : "", + (udccs0 & UDCCS0_RNE) ? " rne" : "", + (udccs0 & UDCCS0_FST) ? " fst" : "", + (udccs0 & UDCCS0_SST) ? " sst" : "", + (udccs0 & UDCCS0_DRWF) ? " dwrf" : "", + (udccs0 & UDCCS0_FTF) ? " ftf" : "", + (udccs0 & UDCCS0_IPR) ? " ipr" : "", + (udccs0 & UDCCS0_OPR) ? " opr" : ""); +} + +static inline u32 udc_ep_get_UDCCS(struct pxa25x_ep *); + +static void __maybe_unused +dump_state(struct pxa25x_udc *dev) +{ + u32 tmp; + unsigned i; + + DMSG("%s, uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n", + state_name[dev->ep0state], + UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL); + dump_udccr("udccr"); + if (dev->has_cfr) { + tmp = UDCCFR; + DMSG("udccfr %02X =%s%s\n", tmp, + (tmp & UDCCFR_AREN) ? " aren" : "", + (tmp & UDCCFR_ACM) ? " acm" : ""); + } + + if (!dev->driver) { + DMSG("no gadget driver bound\n"); + return; + } else + DMSG("ep0 driver '%s'\n", dev->driver->driver.name); + + dump_udccs0 ("udccs0"); + DMSG("ep0 IN %lu/%lu, OUT %lu/%lu\n", + dev->stats.write.bytes, dev->stats.write.ops, + dev->stats.read.bytes, dev->stats.read.ops); + + for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++) { + if (dev->ep[i].ep.desc == NULL) + continue; + DMSG ("udccs%d = %02x\n", i, udc_ep_get_UDCCS(&dev->ep[i])); + } +} + +#else + +#define dump_udccr(x) do{}while(0) +#define dump_udccs0(x) do{}while(0) +#define dump_state(x) do{}while(0) + +#define UDC_DEBUG ((unsigned)0) + +#endif + +#define DBG(lvl, stuff...) do{if ((lvl) <= UDC_DEBUG) DMSG(stuff);}while(0) + +#define ERR(stuff...) pr_err("udc: " stuff) +#define WARNING(stuff...) pr_warn("udc: " stuff) +#define INFO(stuff...) pr_info("udc: " stuff) + + +#endif /* __LINUX_USB_GADGET_PXA25X_H */ diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c new file mode 100644 index 000000000..0ecdfd2ba --- /dev/null +++ b/drivers/usb/gadget/udc/pxa27x_udc.c @@ -0,0 +1,2562 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Handles the Intel 27x USB Device Controller (UDC) + * + * Inspired by original driver by Frank Becker, David Brownell, and others. + * Copyright (C) 2008 Robert Jarzmik + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/clk.h> +#include <linux/irq.h> +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/slab.h> +#include <linux/prefetch.h> +#include <linux/byteorder/generic.h> +#include <linux/platform_data/pxa2xx_udc.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> + +#include <linux/usb.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/phy.h> + +#include "pxa27x_udc.h" + +/* + * This driver handles the USB Device Controller (UDC) in Intel's PXA 27x + * series processors. + * + * Such controller drivers work with a gadget driver. The gadget driver + * returns descriptors, implements configuration and data protocols used + * by the host to interact with this device, and allocates endpoints to + * the different protocol interfaces. The controller driver virtualizes + * usb hardware so that the gadget drivers will be more portable. + * + * This UDC hardware wants to implement a bit too much USB protocol. The + * biggest issues are: that the endpoints have to be set up before the + * controller can be enabled (minor, and not uncommon); and each endpoint + * can only have one configuration, interface and alternative interface + * number (major, and very unusual). Once set up, these cannot be changed + * without a controller reset. + * + * The workaround is to setup all combinations necessary for the gadgets which + * will work with this driver. This is done in pxa_udc structure, statically. + * See pxa_udc, udc_usb_ep versus pxa_ep, and matching function find_pxa_ep. + * (You could modify this if needed. Some drivers have a "fifo_mode" module + * parameter to facilitate such changes.) + * + * The combinations have been tested with these gadgets : + * - zero gadget + * - file storage gadget + * - ether gadget + * + * The driver doesn't use DMA, only IO access and IRQ callbacks. No use is + * made of UDC's double buffering either. USB "On-The-Go" is not implemented. + * + * All the requests are handled the same way : + * - the drivers tries to handle the request directly to the IO + * - if the IO fifo is not big enough, the remaining is send/received in + * interrupt handling. + */ + +#define DRIVER_VERSION "2008-04-18" +#define DRIVER_DESC "PXA 27x USB Device Controller driver" + +static const char driver_name[] = "pxa27x_udc"; +static struct pxa_udc *the_controller; + +static void handle_ep(struct pxa_ep *ep); + +/* + * Debug filesystem + */ +#ifdef CONFIG_USB_GADGET_DEBUG_FS + +#include <linux/debugfs.h> +#include <linux/uaccess.h> +#include <linux/seq_file.h> + +static int state_dbg_show(struct seq_file *s, void *p) +{ + struct pxa_udc *udc = s->private; + u32 tmp; + + if (!udc->driver) + return -ENODEV; + + /* basic device status */ + seq_printf(s, DRIVER_DESC "\n" + "%s version: %s\n" + "Gadget driver: %s\n", + driver_name, DRIVER_VERSION, + udc->driver ? udc->driver->driver.name : "(none)"); + + tmp = udc_readl(udc, UDCCR); + seq_printf(s, + "udccr=0x%0x(%s%s%s%s%s%s%s%s%s%s), con=%d,inter=%d,altinter=%d\n", + tmp, + (tmp & UDCCR_OEN) ? " oen":"", + (tmp & UDCCR_AALTHNP) ? " aalthnp":"", + (tmp & UDCCR_AHNP) ? " rem" : "", + (tmp & UDCCR_BHNP) ? " rstir" : "", + (tmp & UDCCR_DWRE) ? " dwre" : "", + (tmp & UDCCR_SMAC) ? " smac" : "", + (tmp & UDCCR_EMCE) ? " emce" : "", + (tmp & UDCCR_UDR) ? " udr" : "", + (tmp & UDCCR_UDA) ? " uda" : "", + (tmp & UDCCR_UDE) ? " ude" : "", + (tmp & UDCCR_ACN) >> UDCCR_ACN_S, + (tmp & UDCCR_AIN) >> UDCCR_AIN_S, + (tmp & UDCCR_AAISN) >> UDCCR_AAISN_S); + /* registers for device and ep0 */ + seq_printf(s, "udcicr0=0x%08x udcicr1=0x%08x\n", + udc_readl(udc, UDCICR0), udc_readl(udc, UDCICR1)); + seq_printf(s, "udcisr0=0x%08x udcisr1=0x%08x\n", + udc_readl(udc, UDCISR0), udc_readl(udc, UDCISR1)); + seq_printf(s, "udcfnr=%d\n", udc_readl(udc, UDCFNR)); + seq_printf(s, "irqs: reset=%lu, suspend=%lu, resume=%lu, reconfig=%lu\n", + udc->stats.irqs_reset, udc->stats.irqs_suspend, + udc->stats.irqs_resume, udc->stats.irqs_reconfig); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(state_dbg); + +static int queues_dbg_show(struct seq_file *s, void *p) +{ + struct pxa_udc *udc = s->private; + struct pxa_ep *ep; + struct pxa27x_request *req; + int i, maxpkt; + + if (!udc->driver) + return -ENODEV; + + /* dump endpoint queues */ + for (i = 0; i < NR_PXA_ENDPOINTS; i++) { + ep = &udc->pxa_ep[i]; + maxpkt = ep->fifo_size; + seq_printf(s, "%-12s max_pkt=%d %s\n", + EPNAME(ep), maxpkt, "pio"); + + if (list_empty(&ep->queue)) { + seq_puts(s, "\t(nothing queued)\n"); + continue; + } + + list_for_each_entry(req, &ep->queue, queue) { + seq_printf(s, "\treq %p len %d/%d buf %p\n", + &req->req, req->req.actual, + req->req.length, req->req.buf); + } + } + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(queues_dbg); + +static int eps_dbg_show(struct seq_file *s, void *p) +{ + struct pxa_udc *udc = s->private; + struct pxa_ep *ep; + int i; + u32 tmp; + + if (!udc->driver) + return -ENODEV; + + ep = &udc->pxa_ep[0]; + tmp = udc_ep_readl(ep, UDCCSR); + seq_printf(s, "udccsr0=0x%03x(%s%s%s%s%s%s%s)\n", + tmp, + (tmp & UDCCSR0_SA) ? " sa" : "", + (tmp & UDCCSR0_RNE) ? " rne" : "", + (tmp & UDCCSR0_FST) ? " fst" : "", + (tmp & UDCCSR0_SST) ? " sst" : "", + (tmp & UDCCSR0_DME) ? " dme" : "", + (tmp & UDCCSR0_IPR) ? " ipr" : "", + (tmp & UDCCSR0_OPC) ? " opc" : ""); + for (i = 0; i < NR_PXA_ENDPOINTS; i++) { + ep = &udc->pxa_ep[i]; + tmp = i? udc_ep_readl(ep, UDCCR) : udc_readl(udc, UDCCR); + seq_printf(s, "%-12s: IN %lu(%lu reqs), OUT %lu(%lu reqs), irqs=%lu, udccr=0x%08x, udccsr=0x%03x, udcbcr=%d\n", + EPNAME(ep), + ep->stats.in_bytes, ep->stats.in_ops, + ep->stats.out_bytes, ep->stats.out_ops, + ep->stats.irqs, + tmp, udc_ep_readl(ep, UDCCSR), + udc_ep_readl(ep, UDCBCR)); + } + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(eps_dbg); + +static void pxa_init_debugfs(struct pxa_udc *udc) +{ + struct dentry *root; + + root = debugfs_create_dir(udc->gadget.name, usb_debug_root); + debugfs_create_file("udcstate", 0400, root, udc, &state_dbg_fops); + debugfs_create_file("queues", 0400, root, udc, &queues_dbg_fops); + debugfs_create_file("epstate", 0400, root, udc, &eps_dbg_fops); +} + +static void pxa_cleanup_debugfs(struct pxa_udc *udc) +{ + debugfs_lookup_and_remove(udc->gadget.name, usb_debug_root); +} + +#else +static inline void pxa_init_debugfs(struct pxa_udc *udc) +{ +} + +static inline void pxa_cleanup_debugfs(struct pxa_udc *udc) +{ +} +#endif + +/** + * is_match_usb_pxa - check if usb_ep and pxa_ep match + * @udc_usb_ep: usb endpoint + * @ep: pxa endpoint + * @config: configuration required in pxa_ep + * @interface: interface required in pxa_ep + * @altsetting: altsetting required in pxa_ep + * + * Returns 1 if all criteria match between pxa and usb endpoint, 0 otherwise + */ +static int is_match_usb_pxa(struct udc_usb_ep *udc_usb_ep, struct pxa_ep *ep, + int config, int interface, int altsetting) +{ + if (usb_endpoint_num(&udc_usb_ep->desc) != ep->addr) + return 0; + if (usb_endpoint_dir_in(&udc_usb_ep->desc) != ep->dir_in) + return 0; + if (usb_endpoint_type(&udc_usb_ep->desc) != ep->type) + return 0; + if ((ep->config != config) || (ep->interface != interface) + || (ep->alternate != altsetting)) + return 0; + return 1; +} + +/** + * find_pxa_ep - find pxa_ep structure matching udc_usb_ep + * @udc: pxa udc + * @udc_usb_ep: udc_usb_ep structure + * + * Match udc_usb_ep and all pxa_ep available, to see if one matches. + * This is necessary because of the strong pxa hardware restriction requiring + * that once pxa endpoints are initialized, their configuration is freezed, and + * no change can be made to their address, direction, or in which configuration, + * interface or altsetting they are active ... which differs from more usual + * models which have endpoints be roughly just addressable fifos, and leave + * configuration events up to gadget drivers (like all control messages). + * + * Note that there is still a blurred point here : + * - we rely on UDCCR register "active interface" and "active altsetting". + * This is a nonsense in regard of USB spec, where multiple interfaces are + * active at the same time. + * - if we knew for sure that the pxa can handle multiple interface at the + * same time, assuming Intel's Developer Guide is wrong, this function + * should be reviewed, and a cache of couples (iface, altsetting) should + * be kept in the pxa_udc structure. In this case this function would match + * against the cache of couples instead of the "last altsetting" set up. + * + * Returns the matched pxa_ep structure or NULL if none found + */ +static struct pxa_ep *find_pxa_ep(struct pxa_udc *udc, + struct udc_usb_ep *udc_usb_ep) +{ + int i; + struct pxa_ep *ep; + int cfg = udc->config; + int iface = udc->last_interface; + int alt = udc->last_alternate; + + if (udc_usb_ep == &udc->udc_usb_ep[0]) + return &udc->pxa_ep[0]; + + for (i = 1; i < NR_PXA_ENDPOINTS; i++) { + ep = &udc->pxa_ep[i]; + if (is_match_usb_pxa(udc_usb_ep, ep, cfg, iface, alt)) + return ep; + } + return NULL; +} + +/** + * update_pxa_ep_matches - update pxa_ep cached values in all udc_usb_ep + * @udc: pxa udc + * + * Context: interrupt handler + * + * Updates all pxa_ep fields in udc_usb_ep structures, if this field was + * previously set up (and is not NULL). The update is necessary is a + * configuration change or altsetting change was issued by the USB host. + */ +static void update_pxa_ep_matches(struct pxa_udc *udc) +{ + int i; + struct udc_usb_ep *udc_usb_ep; + + for (i = 1; i < NR_USB_ENDPOINTS; i++) { + udc_usb_ep = &udc->udc_usb_ep[i]; + if (udc_usb_ep->pxa_ep) + udc_usb_ep->pxa_ep = find_pxa_ep(udc, udc_usb_ep); + } +} + +/** + * pio_irq_enable - Enables irq generation for one endpoint + * @ep: udc endpoint + */ +static void pio_irq_enable(struct pxa_ep *ep) +{ + struct pxa_udc *udc = ep->dev; + int index = EPIDX(ep); + u32 udcicr0 = udc_readl(udc, UDCICR0); + u32 udcicr1 = udc_readl(udc, UDCICR1); + + if (index < 16) + udc_writel(udc, UDCICR0, udcicr0 | (3 << (index * 2))); + else + udc_writel(udc, UDCICR1, udcicr1 | (3 << ((index - 16) * 2))); +} + +/** + * pio_irq_disable - Disables irq generation for one endpoint + * @ep: udc endpoint + */ +static void pio_irq_disable(struct pxa_ep *ep) +{ + struct pxa_udc *udc = ep->dev; + int index = EPIDX(ep); + u32 udcicr0 = udc_readl(udc, UDCICR0); + u32 udcicr1 = udc_readl(udc, UDCICR1); + + if (index < 16) + udc_writel(udc, UDCICR0, udcicr0 & ~(3 << (index * 2))); + else + udc_writel(udc, UDCICR1, udcicr1 & ~(3 << ((index - 16) * 2))); +} + +/** + * udc_set_mask_UDCCR - set bits in UDCCR + * @udc: udc device + * @mask: bits to set in UDCCR + * + * Sets bits in UDCCR, leaving DME and FST bits as they were. + */ +static inline void udc_set_mask_UDCCR(struct pxa_udc *udc, int mask) +{ + u32 udccr = udc_readl(udc, UDCCR); + udc_writel(udc, UDCCR, + (udccr & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS)); +} + +/** + * udc_clear_mask_UDCCR - clears bits in UDCCR + * @udc: udc device + * @mask: bit to clear in UDCCR + * + * Clears bits in UDCCR, leaving DME and FST bits as they were. + */ +static inline void udc_clear_mask_UDCCR(struct pxa_udc *udc, int mask) +{ + u32 udccr = udc_readl(udc, UDCCR); + udc_writel(udc, UDCCR, + (udccr & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS)); +} + +/** + * ep_write_UDCCSR - set bits in UDCCSR + * @ep: udc endpoint + * @mask: bits to set in UDCCR + * + * Sets bits in UDCCSR (UDCCSR0 and UDCCSR*). + * + * A specific case is applied to ep0 : the ACM bit is always set to 1, for + * SET_INTERFACE and SET_CONFIGURATION. + */ +static inline void ep_write_UDCCSR(struct pxa_ep *ep, int mask) +{ + if (is_ep0(ep)) + mask |= UDCCSR0_ACM; + udc_ep_writel(ep, UDCCSR, mask); +} + +/** + * ep_count_bytes_remain - get how many bytes in udc endpoint + * @ep: udc endpoint + * + * Returns number of bytes in OUT fifos. Broken for IN fifos (-EOPNOTSUPP) + */ +static int ep_count_bytes_remain(struct pxa_ep *ep) +{ + if (ep->dir_in) + return -EOPNOTSUPP; + return udc_ep_readl(ep, UDCBCR) & 0x3ff; +} + +/** + * ep_is_empty - checks if ep has byte ready for reading + * @ep: udc endpoint + * + * If endpoint is the control endpoint, checks if there are bytes in the + * control endpoint fifo. If endpoint is a data endpoint, checks if bytes + * are ready for reading on OUT endpoint. + * + * Returns 0 if ep not empty, 1 if ep empty, -EOPNOTSUPP if IN endpoint + */ +static int ep_is_empty(struct pxa_ep *ep) +{ + int ret; + + if (!is_ep0(ep) && ep->dir_in) + return -EOPNOTSUPP; + if (is_ep0(ep)) + ret = !(udc_ep_readl(ep, UDCCSR) & UDCCSR0_RNE); + else + ret = !(udc_ep_readl(ep, UDCCSR) & UDCCSR_BNE); + return ret; +} + +/** + * ep_is_full - checks if ep has place to write bytes + * @ep: udc endpoint + * + * If endpoint is not the control endpoint and is an IN endpoint, checks if + * there is place to write bytes into the endpoint. + * + * Returns 0 if ep not full, 1 if ep full, -EOPNOTSUPP if OUT endpoint + */ +static int ep_is_full(struct pxa_ep *ep) +{ + if (is_ep0(ep)) + return (udc_ep_readl(ep, UDCCSR) & UDCCSR0_IPR); + if (!ep->dir_in) + return -EOPNOTSUPP; + return (!(udc_ep_readl(ep, UDCCSR) & UDCCSR_BNF)); +} + +/** + * epout_has_pkt - checks if OUT endpoint fifo has a packet available + * @ep: pxa endpoint + * + * Returns 1 if a complete packet is available, 0 if not, -EOPNOTSUPP for IN ep. + */ +static int epout_has_pkt(struct pxa_ep *ep) +{ + if (!is_ep0(ep) && ep->dir_in) + return -EOPNOTSUPP; + if (is_ep0(ep)) + return (udc_ep_readl(ep, UDCCSR) & UDCCSR0_OPC); + return (udc_ep_readl(ep, UDCCSR) & UDCCSR_PC); +} + +/** + * set_ep0state - Set ep0 automata state + * @udc: udc device + * @state: state + */ +static void set_ep0state(struct pxa_udc *udc, int state) +{ + struct pxa_ep *ep = &udc->pxa_ep[0]; + char *old_stname = EP0_STNAME(udc); + + udc->ep0state = state; + ep_dbg(ep, "state=%s->%s, udccsr0=0x%03x, udcbcr=%d\n", old_stname, + EP0_STNAME(udc), udc_ep_readl(ep, UDCCSR), + udc_ep_readl(ep, UDCBCR)); +} + +/** + * ep0_idle - Put control endpoint into idle state + * @dev: udc device + */ +static void ep0_idle(struct pxa_udc *dev) +{ + set_ep0state(dev, WAIT_FOR_SETUP); +} + +/** + * inc_ep_stats_reqs - Update ep stats counts + * @ep: physical endpoint + * @is_in: ep direction (USB_DIR_IN or 0) + * + */ +static void inc_ep_stats_reqs(struct pxa_ep *ep, int is_in) +{ + if (is_in) + ep->stats.in_ops++; + else + ep->stats.out_ops++; +} + +/** + * inc_ep_stats_bytes - Update ep stats counts + * @ep: physical endpoint + * @count: bytes transferred on endpoint + * @is_in: ep direction (USB_DIR_IN or 0) + */ +static void inc_ep_stats_bytes(struct pxa_ep *ep, int count, int is_in) +{ + if (is_in) + ep->stats.in_bytes += count; + else + ep->stats.out_bytes += count; +} + +/** + * pxa_ep_setup - Sets up an usb physical endpoint + * @ep: pxa27x physical endpoint + * + * Find the physical pxa27x ep, and setup its UDCCR + */ +static void pxa_ep_setup(struct pxa_ep *ep) +{ + u32 new_udccr; + + new_udccr = ((ep->config << UDCCONR_CN_S) & UDCCONR_CN) + | ((ep->interface << UDCCONR_IN_S) & UDCCONR_IN) + | ((ep->alternate << UDCCONR_AISN_S) & UDCCONR_AISN) + | ((EPADDR(ep) << UDCCONR_EN_S) & UDCCONR_EN) + | ((EPXFERTYPE(ep) << UDCCONR_ET_S) & UDCCONR_ET) + | ((ep->dir_in) ? UDCCONR_ED : 0) + | ((ep->fifo_size << UDCCONR_MPS_S) & UDCCONR_MPS) + | UDCCONR_EE; + + udc_ep_writel(ep, UDCCR, new_udccr); +} + +/** + * pxa_eps_setup - Sets up all usb physical endpoints + * @dev: udc device + * + * Setup all pxa physical endpoints, except ep0 + */ +static void pxa_eps_setup(struct pxa_udc *dev) +{ + unsigned int i; + + dev_dbg(dev->dev, "%s: dev=%p\n", __func__, dev); + + for (i = 1; i < NR_PXA_ENDPOINTS; i++) + pxa_ep_setup(&dev->pxa_ep[i]); +} + +/** + * pxa_ep_alloc_request - Allocate usb request + * @_ep: usb endpoint + * @gfp_flags: + * + * For the pxa27x, these can just wrap kmalloc/kfree. gadget drivers + * must still pass correctly initialized endpoints, since other controller + * drivers may care about how it's currently set up (dma issues etc). + */ +static struct usb_request * +pxa_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) +{ + struct pxa27x_request *req; + + req = kzalloc(sizeof *req, gfp_flags); + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->queue); + req->in_use = 0; + req->udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep); + + return &req->req; +} + +/** + * pxa_ep_free_request - Free usb request + * @_ep: usb endpoint + * @_req: usb request + * + * Wrapper around kfree to free _req + */ +static void pxa_ep_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct pxa27x_request *req; + + req = container_of(_req, struct pxa27x_request, req); + WARN_ON(!list_empty(&req->queue)); + kfree(req); +} + +/** + * ep_add_request - add a request to the endpoint's queue + * @ep: usb endpoint + * @req: usb request + * + * Context: ep->lock held + * + * Queues the request in the endpoint's queue, and enables the interrupts + * on the endpoint. + */ +static void ep_add_request(struct pxa_ep *ep, struct pxa27x_request *req) +{ + if (unlikely(!req)) + return; + ep_vdbg(ep, "req:%p, lg=%d, udccsr=0x%03x\n", req, + req->req.length, udc_ep_readl(ep, UDCCSR)); + + req->in_use = 1; + list_add_tail(&req->queue, &ep->queue); + pio_irq_enable(ep); +} + +/** + * ep_del_request - removes a request from the endpoint's queue + * @ep: usb endpoint + * @req: usb request + * + * Context: ep->lock held + * + * Unqueue the request from the endpoint's queue. If there are no more requests + * on the endpoint, and if it's not the control endpoint, interrupts are + * disabled on the endpoint. + */ +static void ep_del_request(struct pxa_ep *ep, struct pxa27x_request *req) +{ + if (unlikely(!req)) + return; + ep_vdbg(ep, "req:%p, lg=%d, udccsr=0x%03x\n", req, + req->req.length, udc_ep_readl(ep, UDCCSR)); + + list_del_init(&req->queue); + req->in_use = 0; + if (!is_ep0(ep) && list_empty(&ep->queue)) + pio_irq_disable(ep); +} + +/** + * req_done - Complete an usb request + * @ep: pxa physical endpoint + * @req: pxa request + * @status: usb request status sent to gadget API + * @pflags: flags of previous spinlock_irq_save() or NULL if no lock held + * + * Context: ep->lock held if flags not NULL, else ep->lock released + * + * Retire a pxa27x usb request. Endpoint must be locked. + */ +static void req_done(struct pxa_ep *ep, struct pxa27x_request *req, int status, + unsigned long *pflags) +{ + unsigned long flags; + + ep_del_request(ep, req); + if (likely(req->req.status == -EINPROGRESS)) + req->req.status = status; + else + status = req->req.status; + + if (status && status != -ESHUTDOWN) + ep_dbg(ep, "complete req %p stat %d len %u/%u\n", + &req->req, status, + req->req.actual, req->req.length); + + if (pflags) + spin_unlock_irqrestore(&ep->lock, *pflags); + local_irq_save(flags); + usb_gadget_giveback_request(&req->udc_usb_ep->usb_ep, &req->req); + local_irq_restore(flags); + if (pflags) + spin_lock_irqsave(&ep->lock, *pflags); +} + +/** + * ep_end_out_req - Ends endpoint OUT request + * @ep: physical endpoint + * @req: pxa request + * @pflags: flags of previous spinlock_irq_save() or NULL if no lock held + * + * Context: ep->lock held or released (see req_done()) + * + * Ends endpoint OUT request (completes usb request). + */ +static void ep_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req, + unsigned long *pflags) +{ + inc_ep_stats_reqs(ep, !USB_DIR_IN); + req_done(ep, req, 0, pflags); +} + +/** + * ep0_end_out_req - Ends control endpoint OUT request (ends data stage) + * @ep: physical endpoint + * @req: pxa request + * @pflags: flags of previous spinlock_irq_save() or NULL if no lock held + * + * Context: ep->lock held or released (see req_done()) + * + * Ends control endpoint OUT request (completes usb request), and puts + * control endpoint into idle state + */ +static void ep0_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req, + unsigned long *pflags) +{ + set_ep0state(ep->dev, OUT_STATUS_STAGE); + ep_end_out_req(ep, req, pflags); + ep0_idle(ep->dev); +} + +/** + * ep_end_in_req - Ends endpoint IN request + * @ep: physical endpoint + * @req: pxa request + * @pflags: flags of previous spinlock_irq_save() or NULL if no lock held + * + * Context: ep->lock held or released (see req_done()) + * + * Ends endpoint IN request (completes usb request). + */ +static void ep_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req, + unsigned long *pflags) +{ + inc_ep_stats_reqs(ep, USB_DIR_IN); + req_done(ep, req, 0, pflags); +} + +/** + * ep0_end_in_req - Ends control endpoint IN request (ends data stage) + * @ep: physical endpoint + * @req: pxa request + * @pflags: flags of previous spinlock_irq_save() or NULL if no lock held + * + * Context: ep->lock held or released (see req_done()) + * + * Ends control endpoint IN request (completes usb request), and puts + * control endpoint into status state + */ +static void ep0_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req, + unsigned long *pflags) +{ + set_ep0state(ep->dev, IN_STATUS_STAGE); + ep_end_in_req(ep, req, pflags); +} + +/** + * nuke - Dequeue all requests + * @ep: pxa endpoint + * @status: usb request status + * + * Context: ep->lock released + * + * Dequeues all requests on an endpoint. As a side effect, interrupts will be + * disabled on that endpoint (because no more requests). + */ +static void nuke(struct pxa_ep *ep, int status) +{ + struct pxa27x_request *req; + unsigned long flags; + + spin_lock_irqsave(&ep->lock, flags); + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct pxa27x_request, queue); + req_done(ep, req, status, &flags); + } + spin_unlock_irqrestore(&ep->lock, flags); +} + +/** + * read_packet - transfer 1 packet from an OUT endpoint into request + * @ep: pxa physical endpoint + * @req: usb request + * + * Takes bytes from OUT endpoint and transfers them info the usb request. + * If there is less space in request than bytes received in OUT endpoint, + * bytes are left in the OUT endpoint. + * + * Returns how many bytes were actually transferred + */ +static int read_packet(struct pxa_ep *ep, struct pxa27x_request *req) +{ + u32 *buf; + int bytes_ep, bufferspace, count, i; + + bytes_ep = ep_count_bytes_remain(ep); + bufferspace = req->req.length - req->req.actual; + + buf = (u32 *)(req->req.buf + req->req.actual); + prefetchw(buf); + + if (likely(!ep_is_empty(ep))) + count = min(bytes_ep, bufferspace); + else /* zlp */ + count = 0; + + for (i = count; i > 0; i -= 4) + *buf++ = udc_ep_readl(ep, UDCDR); + req->req.actual += count; + + ep_write_UDCCSR(ep, UDCCSR_PC); + + return count; +} + +/** + * write_packet - transfer 1 packet from request into an IN endpoint + * @ep: pxa physical endpoint + * @req: usb request + * @max: max bytes that fit into endpoint + * + * Takes bytes from usb request, and transfers them into the physical + * endpoint. If there are no bytes to transfer, doesn't write anything + * to physical endpoint. + * + * Returns how many bytes were actually transferred. + */ +static int write_packet(struct pxa_ep *ep, struct pxa27x_request *req, + unsigned int max) +{ + int length, count, remain, i; + u32 *buf; + u8 *buf_8; + + buf = (u32 *)(req->req.buf + req->req.actual); + prefetch(buf); + + length = min(req->req.length - req->req.actual, max); + req->req.actual += length; + + remain = length & 0x3; + count = length & ~(0x3); + for (i = count; i > 0 ; i -= 4) + udc_ep_writel(ep, UDCDR, *buf++); + + buf_8 = (u8 *)buf; + for (i = remain; i > 0; i--) + udc_ep_writeb(ep, UDCDR, *buf_8++); + + ep_vdbg(ep, "length=%d+%d, udccsr=0x%03x\n", count, remain, + udc_ep_readl(ep, UDCCSR)); + + return length; +} + +/** + * read_fifo - Transfer packets from OUT endpoint into usb request + * @ep: pxa physical endpoint + * @req: usb request + * + * Context: interrupt handler + * + * Unload as many packets as possible from the fifo we use for usb OUT + * transfers and put them into the request. Caller should have made sure + * there's at least one packet ready. + * Doesn't complete the request, that's the caller's job + * + * Returns 1 if the request completed, 0 otherwise + */ +static int read_fifo(struct pxa_ep *ep, struct pxa27x_request *req) +{ + int count, is_short, completed = 0; + + while (epout_has_pkt(ep)) { + count = read_packet(ep, req); + inc_ep_stats_bytes(ep, count, !USB_DIR_IN); + + is_short = (count < ep->fifo_size); + ep_dbg(ep, "read udccsr:%03x, count:%d bytes%s req %p %d/%d\n", + udc_ep_readl(ep, UDCCSR), count, is_short ? "/S" : "", + &req->req, req->req.actual, req->req.length); + + /* completion */ + if (is_short || req->req.actual == req->req.length) { + completed = 1; + break; + } + /* finished that packet. the next one may be waiting... */ + } + return completed; +} + +/** + * write_fifo - transfer packets from usb request into an IN endpoint + * @ep: pxa physical endpoint + * @req: pxa usb request + * + * Write to an IN endpoint fifo, as many packets as possible. + * irqs will use this to write the rest later. + * caller guarantees at least one packet buffer is ready (or a zlp). + * Doesn't complete the request, that's the caller's job + * + * Returns 1 if request fully transferred, 0 if partial transfer + */ +static int write_fifo(struct pxa_ep *ep, struct pxa27x_request *req) +{ + unsigned max; + int count, is_short, is_last = 0, completed = 0, totcount = 0; + u32 udccsr; + + max = ep->fifo_size; + do { + udccsr = udc_ep_readl(ep, UDCCSR); + if (udccsr & UDCCSR_PC) { + ep_vdbg(ep, "Clearing Transmit Complete, udccsr=%x\n", + udccsr); + ep_write_UDCCSR(ep, UDCCSR_PC); + } + if (udccsr & UDCCSR_TRN) { + ep_vdbg(ep, "Clearing Underrun on, udccsr=%x\n", + udccsr); + ep_write_UDCCSR(ep, UDCCSR_TRN); + } + + count = write_packet(ep, req, max); + inc_ep_stats_bytes(ep, count, USB_DIR_IN); + totcount += count; + + /* last packet is usually short (or a zlp) */ + if (unlikely(count < max)) { + is_last = 1; + is_short = 1; + } else { + if (likely(req->req.length > req->req.actual) + || req->req.zero) + is_last = 0; + else + is_last = 1; + /* interrupt/iso maxpacket may not fill the fifo */ + is_short = unlikely(max < ep->fifo_size); + } + + if (is_short) + ep_write_UDCCSR(ep, UDCCSR_SP); + + /* requests complete when all IN data is in the FIFO */ + if (is_last) { + completed = 1; + break; + } + } while (!ep_is_full(ep)); + + ep_dbg(ep, "wrote count:%d bytes%s%s, left:%d req=%p\n", + totcount, is_last ? "/L" : "", is_short ? "/S" : "", + req->req.length - req->req.actual, &req->req); + + return completed; +} + +/** + * read_ep0_fifo - Transfer packets from control endpoint into usb request + * @ep: control endpoint + * @req: pxa usb request + * + * Special ep0 version of the above read_fifo. Reads as many bytes from control + * endpoint as can be read, and stores them into usb request (limited by request + * maximum length). + * + * Returns 0 if usb request only partially filled, 1 if fully filled + */ +static int read_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req) +{ + int count, is_short, completed = 0; + + while (epout_has_pkt(ep)) { + count = read_packet(ep, req); + ep_write_UDCCSR(ep, UDCCSR0_OPC); + inc_ep_stats_bytes(ep, count, !USB_DIR_IN); + + is_short = (count < ep->fifo_size); + ep_dbg(ep, "read udccsr:%03x, count:%d bytes%s req %p %d/%d\n", + udc_ep_readl(ep, UDCCSR), count, is_short ? "/S" : "", + &req->req, req->req.actual, req->req.length); + + if (is_short || req->req.actual >= req->req.length) { + completed = 1; + break; + } + } + + return completed; +} + +/** + * write_ep0_fifo - Send a request to control endpoint (ep0 in) + * @ep: control endpoint + * @req: request + * + * Context: interrupt handler + * + * Sends a request (or a part of the request) to the control endpoint (ep0 in). + * If the request doesn't fit, the remaining part will be sent from irq. + * The request is considered fully written only if either : + * - last write transferred all remaining bytes, but fifo was not fully filled + * - last write was a 0 length write + * + * Returns 1 if request fully written, 0 if request only partially sent + */ +static int write_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req) +{ + unsigned count; + int is_last, is_short; + + count = write_packet(ep, req, EP0_FIFO_SIZE); + inc_ep_stats_bytes(ep, count, USB_DIR_IN); + + is_short = (count < EP0_FIFO_SIZE); + is_last = ((count == 0) || (count < EP0_FIFO_SIZE)); + + /* Sends either a short packet or a 0 length packet */ + if (unlikely(is_short)) + ep_write_UDCCSR(ep, UDCCSR0_IPR); + + ep_dbg(ep, "in %d bytes%s%s, %d left, req=%p, udccsr0=0x%03x\n", + count, is_short ? "/S" : "", is_last ? "/L" : "", + req->req.length - req->req.actual, + &req->req, udc_ep_readl(ep, UDCCSR)); + + return is_last; +} + +/** + * pxa_ep_queue - Queue a request into an IN endpoint + * @_ep: usb endpoint + * @_req: usb request + * @gfp_flags: flags + * + * Context: thread context or from the interrupt handler in the + * special case of ep0 setup : + * (irq->handle_ep0_ctrl_req->gadget_setup->pxa_ep_queue) + * + * Returns 0 if succedeed, error otherwise + */ +static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t gfp_flags) +{ + struct udc_usb_ep *udc_usb_ep; + struct pxa_ep *ep; + struct pxa27x_request *req; + struct pxa_udc *dev; + unsigned long flags; + int rc = 0; + int is_first_req; + unsigned length; + int recursion_detected; + + req = container_of(_req, struct pxa27x_request, req); + udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep); + + if (unlikely(!_req || !_req->complete || !_req->buf)) + return -EINVAL; + + if (unlikely(!_ep)) + return -EINVAL; + + ep = udc_usb_ep->pxa_ep; + if (unlikely(!ep)) + return -EINVAL; + + dev = ep->dev; + if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) { + ep_dbg(ep, "bogus device state\n"); + return -ESHUTDOWN; + } + + /* iso is always one packet per request, that's the only way + * we can report per-packet status. that also helps with dma. + */ + if (unlikely(EPXFERTYPE_is_ISO(ep) + && req->req.length > ep->fifo_size)) + return -EMSGSIZE; + + spin_lock_irqsave(&ep->lock, flags); + recursion_detected = ep->in_handle_ep; + + is_first_req = list_empty(&ep->queue); + ep_dbg(ep, "queue req %p(first=%s), len %d buf %p\n", + _req, is_first_req ? "yes" : "no", + _req->length, _req->buf); + + if (!ep->enabled) { + _req->status = -ESHUTDOWN; + rc = -ESHUTDOWN; + goto out_locked; + } + + if (req->in_use) { + ep_err(ep, "refusing to queue req %p (already queued)\n", req); + goto out_locked; + } + + length = _req->length; + _req->status = -EINPROGRESS; + _req->actual = 0; + + ep_add_request(ep, req); + spin_unlock_irqrestore(&ep->lock, flags); + + if (is_ep0(ep)) { + switch (dev->ep0state) { + case WAIT_ACK_SET_CONF_INTERF: + if (length == 0) { + ep_end_in_req(ep, req, NULL); + } else { + ep_err(ep, "got a request of %d bytes while" + "in state WAIT_ACK_SET_CONF_INTERF\n", + length); + ep_del_request(ep, req); + rc = -EL2HLT; + } + ep0_idle(ep->dev); + break; + case IN_DATA_STAGE: + if (!ep_is_full(ep)) + if (write_ep0_fifo(ep, req)) + ep0_end_in_req(ep, req, NULL); + break; + case OUT_DATA_STAGE: + if ((length == 0) || !epout_has_pkt(ep)) + if (read_ep0_fifo(ep, req)) + ep0_end_out_req(ep, req, NULL); + break; + default: + ep_err(ep, "odd state %s to send me a request\n", + EP0_STNAME(ep->dev)); + ep_del_request(ep, req); + rc = -EL2HLT; + break; + } + } else { + if (!recursion_detected) + handle_ep(ep); + } + +out: + return rc; +out_locked: + spin_unlock_irqrestore(&ep->lock, flags); + goto out; +} + +/** + * pxa_ep_dequeue - Dequeue one request + * @_ep: usb endpoint + * @_req: usb request + * + * Return 0 if no error, -EINVAL or -ECONNRESET otherwise + */ +static int pxa_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct pxa_ep *ep; + struct udc_usb_ep *udc_usb_ep; + struct pxa27x_request *req = NULL, *iter; + unsigned long flags; + int rc = -EINVAL; + + if (!_ep) + return rc; + udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep); + ep = udc_usb_ep->pxa_ep; + if (!ep || is_ep0(ep)) + return rc; + + spin_lock_irqsave(&ep->lock, flags); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry(iter, &ep->queue, queue) { + if (&iter->req != _req) + continue; + req = iter; + rc = 0; + break; + } + + spin_unlock_irqrestore(&ep->lock, flags); + if (!rc) + req_done(ep, req, -ECONNRESET, NULL); + return rc; +} + +/** + * pxa_ep_set_halt - Halts operations on one endpoint + * @_ep: usb endpoint + * @value: + * + * Returns 0 if no error, -EINVAL, -EROFS, -EAGAIN otherwise + */ +static int pxa_ep_set_halt(struct usb_ep *_ep, int value) +{ + struct pxa_ep *ep; + struct udc_usb_ep *udc_usb_ep; + unsigned long flags; + int rc; + + + if (!_ep) + return -EINVAL; + udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep); + ep = udc_usb_ep->pxa_ep; + if (!ep || is_ep0(ep)) + return -EINVAL; + + if (value == 0) { + /* + * This path (reset toggle+halt) is needed to implement + * SET_INTERFACE on normal hardware. but it can't be + * done from software on the PXA UDC, and the hardware + * forgets to do it as part of SET_INTERFACE automagic. + */ + ep_dbg(ep, "only host can clear halt\n"); + return -EROFS; + } + + spin_lock_irqsave(&ep->lock, flags); + + rc = -EAGAIN; + if (ep->dir_in && (ep_is_full(ep) || !list_empty(&ep->queue))) + goto out; + + /* FST, FEF bits are the same for control and non control endpoints */ + rc = 0; + ep_write_UDCCSR(ep, UDCCSR_FST | UDCCSR_FEF); + if (is_ep0(ep)) + set_ep0state(ep->dev, STALL); + +out: + spin_unlock_irqrestore(&ep->lock, flags); + return rc; +} + +/** + * pxa_ep_fifo_status - Get how many bytes in physical endpoint + * @_ep: usb endpoint + * + * Returns number of bytes in OUT fifos. Broken for IN fifos. + */ +static int pxa_ep_fifo_status(struct usb_ep *_ep) +{ + struct pxa_ep *ep; + struct udc_usb_ep *udc_usb_ep; + + if (!_ep) + return -ENODEV; + udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep); + ep = udc_usb_ep->pxa_ep; + if (!ep || is_ep0(ep)) + return -ENODEV; + + if (ep->dir_in) + return -EOPNOTSUPP; + if (ep->dev->gadget.speed == USB_SPEED_UNKNOWN || ep_is_empty(ep)) + return 0; + else + return ep_count_bytes_remain(ep) + 1; +} + +/** + * pxa_ep_fifo_flush - Flushes one endpoint + * @_ep: usb endpoint + * + * Discards all data in one endpoint(IN or OUT), except control endpoint. + */ +static void pxa_ep_fifo_flush(struct usb_ep *_ep) +{ + struct pxa_ep *ep; + struct udc_usb_ep *udc_usb_ep; + unsigned long flags; + + if (!_ep) + return; + udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep); + ep = udc_usb_ep->pxa_ep; + if (!ep || is_ep0(ep)) + return; + + spin_lock_irqsave(&ep->lock, flags); + + if (unlikely(!list_empty(&ep->queue))) + ep_dbg(ep, "called while queue list not empty\n"); + ep_dbg(ep, "called\n"); + + /* for OUT, just read and discard the FIFO contents. */ + if (!ep->dir_in) { + while (!ep_is_empty(ep)) + udc_ep_readl(ep, UDCDR); + } else { + /* most IN status is the same, but ISO can't stall */ + ep_write_UDCCSR(ep, + UDCCSR_PC | UDCCSR_FEF | UDCCSR_TRN + | (EPXFERTYPE_is_ISO(ep) ? 0 : UDCCSR_SST)); + } + + spin_unlock_irqrestore(&ep->lock, flags); +} + +/** + * pxa_ep_enable - Enables usb endpoint + * @_ep: usb endpoint + * @desc: usb endpoint descriptor + * + * Nothing much to do here, as ep configuration is done once and for all + * before udc is enabled. After udc enable, no physical endpoint configuration + * can be changed. + * Function makes sanity checks and flushes the endpoint. + */ +static int pxa_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct pxa_ep *ep; + struct udc_usb_ep *udc_usb_ep; + struct pxa_udc *udc; + + if (!_ep || !desc) + return -EINVAL; + + udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep); + if (udc_usb_ep->pxa_ep) { + ep = udc_usb_ep->pxa_ep; + ep_warn(ep, "usb_ep %s already enabled, doing nothing\n", + _ep->name); + } else { + ep = find_pxa_ep(udc_usb_ep->dev, udc_usb_ep); + } + + if (!ep || is_ep0(ep)) { + dev_err(udc_usb_ep->dev->dev, + "unable to match pxa_ep for ep %s\n", + _ep->name); + return -EINVAL; + } + + if ((desc->bDescriptorType != USB_DT_ENDPOINT) + || (ep->type != usb_endpoint_type(desc))) { + ep_err(ep, "type mismatch\n"); + return -EINVAL; + } + + if (ep->fifo_size < usb_endpoint_maxp(desc)) { + ep_err(ep, "bad maxpacket\n"); + return -ERANGE; + } + + udc_usb_ep->pxa_ep = ep; + udc = ep->dev; + + if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) { + ep_err(ep, "bogus device state\n"); + return -ESHUTDOWN; + } + + ep->enabled = 1; + + /* flush fifo (mostly for OUT buffers) */ + pxa_ep_fifo_flush(_ep); + + ep_dbg(ep, "enabled\n"); + return 0; +} + +/** + * pxa_ep_disable - Disable usb endpoint + * @_ep: usb endpoint + * + * Same as for pxa_ep_enable, no physical endpoint configuration can be + * changed. + * Function flushes the endpoint and related requests. + */ +static int pxa_ep_disable(struct usb_ep *_ep) +{ + struct pxa_ep *ep; + struct udc_usb_ep *udc_usb_ep; + + if (!_ep) + return -EINVAL; + + udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep); + ep = udc_usb_ep->pxa_ep; + if (!ep || is_ep0(ep) || !list_empty(&ep->queue)) + return -EINVAL; + + ep->enabled = 0; + nuke(ep, -ESHUTDOWN); + + pxa_ep_fifo_flush(_ep); + udc_usb_ep->pxa_ep = NULL; + + ep_dbg(ep, "disabled\n"); + return 0; +} + +static const struct usb_ep_ops pxa_ep_ops = { + .enable = pxa_ep_enable, + .disable = pxa_ep_disable, + + .alloc_request = pxa_ep_alloc_request, + .free_request = pxa_ep_free_request, + + .queue = pxa_ep_queue, + .dequeue = pxa_ep_dequeue, + + .set_halt = pxa_ep_set_halt, + .fifo_status = pxa_ep_fifo_status, + .fifo_flush = pxa_ep_fifo_flush, +}; + +/** + * dplus_pullup - Connect or disconnect pullup resistor to D+ pin + * @udc: udc device + * @on: 0 if disconnect pullup resistor, 1 otherwise + * Context: any + * + * Handle D+ pullup resistor, make the device visible to the usb bus, and + * declare it as a full speed usb device + */ +static void dplus_pullup(struct pxa_udc *udc, int on) +{ + if (udc->gpiod) { + gpiod_set_value(udc->gpiod, on); + } else if (udc->udc_command) { + if (on) + udc->udc_command(PXA2XX_UDC_CMD_CONNECT); + else + udc->udc_command(PXA2XX_UDC_CMD_DISCONNECT); + } + udc->pullup_on = on; +} + +/** + * pxa_udc_get_frame - Returns usb frame number + * @_gadget: usb gadget + */ +static int pxa_udc_get_frame(struct usb_gadget *_gadget) +{ + struct pxa_udc *udc = to_gadget_udc(_gadget); + + return (udc_readl(udc, UDCFNR) & 0x7ff); +} + +/** + * pxa_udc_wakeup - Force udc device out of suspend + * @_gadget: usb gadget + * + * Returns 0 if successful, error code otherwise + */ +static int pxa_udc_wakeup(struct usb_gadget *_gadget) +{ + struct pxa_udc *udc = to_gadget_udc(_gadget); + + /* host may not have enabled remote wakeup */ + if ((udc_readl(udc, UDCCR) & UDCCR_DWRE) == 0) + return -EHOSTUNREACH; + udc_set_mask_UDCCR(udc, UDCCR_UDR); + return 0; +} + +static void udc_enable(struct pxa_udc *udc); +static void udc_disable(struct pxa_udc *udc); + +/** + * should_enable_udc - Tells if UDC should be enabled + * @udc: udc device + * Context: any + * + * The UDC should be enabled if : + * - the pullup resistor is connected + * - and a gadget driver is bound + * - and vbus is sensed (or no vbus sense is available) + * + * Returns 1 if UDC should be enabled, 0 otherwise + */ +static int should_enable_udc(struct pxa_udc *udc) +{ + int put_on; + + put_on = ((udc->pullup_on) && (udc->driver)); + put_on &= ((udc->vbus_sensed) || (IS_ERR_OR_NULL(udc->transceiver))); + return put_on; +} + +/** + * should_disable_udc - Tells if UDC should be disabled + * @udc: udc device + * Context: any + * + * The UDC should be disabled if : + * - the pullup resistor is not connected + * - or no gadget driver is bound + * - or no vbus is sensed (when vbus sesing is available) + * + * Returns 1 if UDC should be disabled + */ +static int should_disable_udc(struct pxa_udc *udc) +{ + int put_off; + + put_off = ((!udc->pullup_on) || (!udc->driver)); + put_off |= ((!udc->vbus_sensed) && (!IS_ERR_OR_NULL(udc->transceiver))); + return put_off; +} + +/** + * pxa_udc_pullup - Offer manual D+ pullup control + * @_gadget: usb gadget using the control + * @is_active: 0 if disconnect, else connect D+ pullup resistor + * + * Context: task context, might sleep + * + * Returns 0 if OK, -EOPNOTSUPP if udc driver doesn't handle D+ pullup + */ +static int pxa_udc_pullup(struct usb_gadget *_gadget, int is_active) +{ + struct pxa_udc *udc = to_gadget_udc(_gadget); + + if (!udc->gpiod && !udc->udc_command) + return -EOPNOTSUPP; + + dplus_pullup(udc, is_active); + + if (should_enable_udc(udc)) + udc_enable(udc); + if (should_disable_udc(udc)) + udc_disable(udc); + return 0; +} + +/** + * pxa_udc_vbus_session - Called by external transceiver to enable/disable udc + * @_gadget: usb gadget + * @is_active: 0 if should disable the udc, 1 if should enable + * + * Enables the udc, and optionnaly activates D+ pullup resistor. Or disables the + * udc, and deactivates D+ pullup resistor. + * + * Returns 0 + */ +static int pxa_udc_vbus_session(struct usb_gadget *_gadget, int is_active) +{ + struct pxa_udc *udc = to_gadget_udc(_gadget); + + udc->vbus_sensed = is_active; + if (should_enable_udc(udc)) + udc_enable(udc); + if (should_disable_udc(udc)) + udc_disable(udc); + + return 0; +} + +/** + * pxa_udc_vbus_draw - Called by gadget driver after SET_CONFIGURATION completed + * @_gadget: usb gadget + * @mA: current drawn + * + * Context: task context, might sleep + * + * Called after a configuration was chosen by a USB host, to inform how much + * current can be drawn by the device from VBus line. + * + * Returns 0 or -EOPNOTSUPP if no transceiver is handling the udc + */ +static int pxa_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA) +{ + struct pxa_udc *udc; + + udc = to_gadget_udc(_gadget); + if (!IS_ERR_OR_NULL(udc->transceiver)) + return usb_phy_set_power(udc->transceiver, mA); + return -EOPNOTSUPP; +} + +/** + * pxa_udc_phy_event - Called by phy upon VBus event + * @nb: notifier block + * @action: phy action, is vbus connect or disconnect + * @data: the usb_gadget structure in pxa_udc + * + * Called by the USB Phy when a cable connect or disconnect is sensed. + * + * Returns 0 + */ +static int pxa_udc_phy_event(struct notifier_block *nb, unsigned long action, + void *data) +{ + struct usb_gadget *gadget = data; + + switch (action) { + case USB_EVENT_VBUS: + usb_gadget_vbus_connect(gadget); + return NOTIFY_OK; + case USB_EVENT_NONE: + usb_gadget_vbus_disconnect(gadget); + return NOTIFY_OK; + default: + return NOTIFY_DONE; + } +} + +static struct notifier_block pxa27x_udc_phy = { + .notifier_call = pxa_udc_phy_event, +}; + +static int pxa27x_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver); +static int pxa27x_udc_stop(struct usb_gadget *g); + +static const struct usb_gadget_ops pxa_udc_ops = { + .get_frame = pxa_udc_get_frame, + .wakeup = pxa_udc_wakeup, + .pullup = pxa_udc_pullup, + .vbus_session = pxa_udc_vbus_session, + .vbus_draw = pxa_udc_vbus_draw, + .udc_start = pxa27x_udc_start, + .udc_stop = pxa27x_udc_stop, +}; + +/** + * udc_disable - disable udc device controller + * @udc: udc device + * Context: any + * + * Disables the udc device : disables clocks, udc interrupts, control endpoint + * interrupts. + */ +static void udc_disable(struct pxa_udc *udc) +{ + if (!udc->enabled) + return; + + udc_writel(udc, UDCICR0, 0); + udc_writel(udc, UDCICR1, 0); + + udc_clear_mask_UDCCR(udc, UDCCR_UDE); + + ep0_idle(udc); + udc->gadget.speed = USB_SPEED_UNKNOWN; + clk_disable(udc->clk); + + udc->enabled = 0; +} + +/** + * udc_init_data - Initialize udc device data structures + * @dev: udc device + * + * Initializes gadget endpoint list, endpoints locks. No action is taken + * on the hardware. + */ +static void udc_init_data(struct pxa_udc *dev) +{ + int i; + struct pxa_ep *ep; + + /* device/ep0 records init */ + INIT_LIST_HEAD(&dev->gadget.ep_list); + INIT_LIST_HEAD(&dev->gadget.ep0->ep_list); + dev->udc_usb_ep[0].pxa_ep = &dev->pxa_ep[0]; + dev->gadget.quirk_altset_not_supp = 1; + ep0_idle(dev); + + /* PXA endpoints init */ + for (i = 0; i < NR_PXA_ENDPOINTS; i++) { + ep = &dev->pxa_ep[i]; + + ep->enabled = is_ep0(ep); + INIT_LIST_HEAD(&ep->queue); + spin_lock_init(&ep->lock); + } + + /* USB endpoints init */ + for (i = 1; i < NR_USB_ENDPOINTS; i++) { + list_add_tail(&dev->udc_usb_ep[i].usb_ep.ep_list, + &dev->gadget.ep_list); + usb_ep_set_maxpacket_limit(&dev->udc_usb_ep[i].usb_ep, + dev->udc_usb_ep[i].usb_ep.maxpacket); + } +} + +/** + * udc_enable - Enables the udc device + * @udc: udc device + * + * Enables the udc device : enables clocks, udc interrupts, control endpoint + * interrupts, sets usb as UDC client and setups endpoints. + */ +static void udc_enable(struct pxa_udc *udc) +{ + if (udc->enabled) + return; + + clk_enable(udc->clk); + udc_writel(udc, UDCICR0, 0); + udc_writel(udc, UDCICR1, 0); + udc_clear_mask_UDCCR(udc, UDCCR_UDE); + + ep0_idle(udc); + udc->gadget.speed = USB_SPEED_FULL; + memset(&udc->stats, 0, sizeof(udc->stats)); + + pxa_eps_setup(udc); + udc_set_mask_UDCCR(udc, UDCCR_UDE); + ep_write_UDCCSR(&udc->pxa_ep[0], UDCCSR0_ACM); + udelay(2); + if (udc_readl(udc, UDCCR) & UDCCR_EMCE) + dev_err(udc->dev, "Configuration errors, udc disabled\n"); + + /* + * Caller must be able to sleep in order to cope with startup transients + */ + msleep(100); + + /* enable suspend/resume and reset irqs */ + udc_writel(udc, UDCICR1, + UDCICR1_IECC | UDCICR1_IERU + | UDCICR1_IESU | UDCICR1_IERS); + + /* enable ep0 irqs */ + pio_irq_enable(&udc->pxa_ep[0]); + + udc->enabled = 1; +} + +/** + * pxa27x_udc_start - Register gadget driver + * @g: gadget + * @driver: gadget driver + * + * When a driver is successfully registered, it will receive control requests + * including set_configuration(), which enables non-control requests. Then + * usb traffic follows until a disconnect is reported. Then a host may connect + * again, or the driver might get unbound. + * + * Note that the udc is not automatically enabled. Check function + * should_enable_udc(). + * + * Returns 0 if no error, -EINVAL, -ENODEV, -EBUSY otherwise + */ +static int pxa27x_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) +{ + struct pxa_udc *udc = to_pxa(g); + int retval; + + /* first hook up the driver ... */ + udc->driver = driver; + + if (!IS_ERR_OR_NULL(udc->transceiver)) { + retval = otg_set_peripheral(udc->transceiver->otg, + &udc->gadget); + if (retval) { + dev_err(udc->dev, "can't bind to transceiver\n"); + goto fail; + } + } + + if (should_enable_udc(udc)) + udc_enable(udc); + return 0; + +fail: + udc->driver = NULL; + return retval; +} + +/** + * stop_activity - Stops udc endpoints + * @udc: udc device + * + * Disables all udc endpoints (even control endpoint), report disconnect to + * the gadget user. + */ +static void stop_activity(struct pxa_udc *udc) +{ + int i; + + udc->gadget.speed = USB_SPEED_UNKNOWN; + + for (i = 0; i < NR_USB_ENDPOINTS; i++) + pxa_ep_disable(&udc->udc_usb_ep[i].usb_ep); +} + +/** + * pxa27x_udc_stop - Unregister the gadget driver + * @g: gadget + * + * Returns 0 if no error, -ENODEV, -EINVAL otherwise + */ +static int pxa27x_udc_stop(struct usb_gadget *g) +{ + struct pxa_udc *udc = to_pxa(g); + + stop_activity(udc); + udc_disable(udc); + + udc->driver = NULL; + + if (!IS_ERR_OR_NULL(udc->transceiver)) + return otg_set_peripheral(udc->transceiver->otg, NULL); + return 0; +} + +/** + * handle_ep0_ctrl_req - handle control endpoint control request + * @udc: udc device + * @req: control request + */ +static void handle_ep0_ctrl_req(struct pxa_udc *udc, + struct pxa27x_request *req) +{ + struct pxa_ep *ep = &udc->pxa_ep[0]; + union { + struct usb_ctrlrequest r; + u32 word[2]; + } u; + int i; + int have_extrabytes = 0; + unsigned long flags; + + nuke(ep, -EPROTO); + spin_lock_irqsave(&ep->lock, flags); + + /* + * In the PXA320 manual, in the section about Back-to-Back setup + * packets, it describes this situation. The solution is to set OPC to + * get rid of the status packet, and then continue with the setup + * packet. Generalize to pxa27x CPUs. + */ + if (epout_has_pkt(ep) && (ep_count_bytes_remain(ep) == 0)) + ep_write_UDCCSR(ep, UDCCSR0_OPC); + + /* read SETUP packet */ + for (i = 0; i < 2; i++) { + if (unlikely(ep_is_empty(ep))) + goto stall; + u.word[i] = udc_ep_readl(ep, UDCDR); + } + + have_extrabytes = !ep_is_empty(ep); + while (!ep_is_empty(ep)) { + i = udc_ep_readl(ep, UDCDR); + ep_err(ep, "wrong to have extra bytes for setup : 0x%08x\n", i); + } + + ep_dbg(ep, "SETUP %02x.%02x v%04x i%04x l%04x\n", + u.r.bRequestType, u.r.bRequest, + le16_to_cpu(u.r.wValue), le16_to_cpu(u.r.wIndex), + le16_to_cpu(u.r.wLength)); + if (unlikely(have_extrabytes)) + goto stall; + + if (u.r.bRequestType & USB_DIR_IN) + set_ep0state(udc, IN_DATA_STAGE); + else + set_ep0state(udc, OUT_DATA_STAGE); + + /* Tell UDC to enter Data Stage */ + ep_write_UDCCSR(ep, UDCCSR0_SA | UDCCSR0_OPC); + + spin_unlock_irqrestore(&ep->lock, flags); + i = udc->driver->setup(&udc->gadget, &u.r); + spin_lock_irqsave(&ep->lock, flags); + if (i < 0) + goto stall; +out: + spin_unlock_irqrestore(&ep->lock, flags); + return; +stall: + ep_dbg(ep, "protocol STALL, udccsr0=%03x err %d\n", + udc_ep_readl(ep, UDCCSR), i); + ep_write_UDCCSR(ep, UDCCSR0_FST | UDCCSR0_FTF); + set_ep0state(udc, STALL); + goto out; +} + +/** + * handle_ep0 - Handle control endpoint data transfers + * @udc: udc device + * @fifo_irq: 1 if triggered by fifo service type irq + * @opc_irq: 1 if triggered by output packet complete type irq + * + * Context : interrupt handler + * + * Tries to transfer all pending request data into the endpoint and/or + * transfer all pending data in the endpoint into usb requests. + * Handles states of ep0 automata. + * + * PXA27x hardware handles several standard usb control requests without + * driver notification. The requests fully handled by hardware are : + * SET_ADDRESS, SET_FEATURE, CLEAR_FEATURE, GET_CONFIGURATION, GET_INTERFACE, + * GET_STATUS + * The requests handled by hardware, but with irq notification are : + * SYNCH_FRAME, SET_CONFIGURATION, SET_INTERFACE + * The remaining standard requests really handled by handle_ep0 are : + * GET_DESCRIPTOR, SET_DESCRIPTOR, specific requests. + * Requests standardized outside of USB 2.0 chapter 9 are handled more + * uniformly, by gadget drivers. + * + * The control endpoint state machine is _not_ USB spec compliant, it's even + * hardly compliant with Intel PXA270 developers guide. + * The key points which inferred this state machine are : + * - on every setup token, bit UDCCSR0_SA is raised and held until cleared by + * software. + * - on every OUT packet received, UDCCSR0_OPC is raised and held until + * cleared by software. + * - clearing UDCCSR0_OPC always flushes ep0. If in setup stage, never do it + * before reading ep0. + * This is true only for PXA27x. This is not true anymore for PXA3xx family + * (check Back-to-Back setup packet in developers guide). + * - irq can be called on a "packet complete" event (opc_irq=1), while + * UDCCSR0_OPC is not yet raised (delta can be as big as 100ms + * from experimentation). + * - as UDCCSR0_SA can be activated while in irq handling, and clearing + * UDCCSR0_OPC would flush the setup data, we almost never clear UDCCSR0_OPC + * => we never actually read the "status stage" packet of an IN data stage + * => this is not documented in Intel documentation + * - hardware as no idea of STATUS STAGE, it only handle SETUP STAGE and DATA + * STAGE. The driver add STATUS STAGE to send last zero length packet in + * OUT_STATUS_STAGE. + * - special attention was needed for IN_STATUS_STAGE. If a packet complete + * event is detected, we terminate the status stage without ackowledging the + * packet (not to risk to loose a potential SETUP packet) + */ +static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq) +{ + u32 udccsr0; + struct pxa_ep *ep = &udc->pxa_ep[0]; + struct pxa27x_request *req = NULL; + int completed = 0; + + if (!list_empty(&ep->queue)) + req = list_entry(ep->queue.next, struct pxa27x_request, queue); + + udccsr0 = udc_ep_readl(ep, UDCCSR); + ep_dbg(ep, "state=%s, req=%p, udccsr0=0x%03x, udcbcr=%d, irq_msk=%x\n", + EP0_STNAME(udc), req, udccsr0, udc_ep_readl(ep, UDCBCR), + (fifo_irq << 1 | opc_irq)); + + if (udccsr0 & UDCCSR0_SST) { + ep_dbg(ep, "clearing stall status\n"); + nuke(ep, -EPIPE); + ep_write_UDCCSR(ep, UDCCSR0_SST); + ep0_idle(udc); + } + + if (udccsr0 & UDCCSR0_SA) { + nuke(ep, 0); + set_ep0state(udc, SETUP_STAGE); + } + + switch (udc->ep0state) { + case WAIT_FOR_SETUP: + /* + * Hardware bug : beware, we cannot clear OPC, since we would + * miss a potential OPC irq for a setup packet. + * So, we only do ... nothing, and hope for a next irq with + * UDCCSR0_SA set. + */ + break; + case SETUP_STAGE: + udccsr0 &= UDCCSR0_CTRL_REQ_MASK; + if (likely(udccsr0 == UDCCSR0_CTRL_REQ_MASK)) + handle_ep0_ctrl_req(udc, req); + break; + case IN_DATA_STAGE: /* GET_DESCRIPTOR */ + if (epout_has_pkt(ep)) + ep_write_UDCCSR(ep, UDCCSR0_OPC); + if (req && !ep_is_full(ep)) + completed = write_ep0_fifo(ep, req); + if (completed) + ep0_end_in_req(ep, req, NULL); + break; + case OUT_DATA_STAGE: /* SET_DESCRIPTOR */ + if (epout_has_pkt(ep) && req) + completed = read_ep0_fifo(ep, req); + if (completed) + ep0_end_out_req(ep, req, NULL); + break; + case STALL: + ep_write_UDCCSR(ep, UDCCSR0_FST); + break; + case IN_STATUS_STAGE: + /* + * Hardware bug : beware, we cannot clear OPC, since we would + * miss a potential PC irq for a setup packet. + * So, we only put the ep0 into WAIT_FOR_SETUP state. + */ + if (opc_irq) + ep0_idle(udc); + break; + case OUT_STATUS_STAGE: + case WAIT_ACK_SET_CONF_INTERF: + ep_warn(ep, "should never get in %s state here!!!\n", + EP0_STNAME(ep->dev)); + ep0_idle(udc); + break; + } +} + +/** + * handle_ep - Handle endpoint data tranfers + * @ep: pxa physical endpoint + * + * Tries to transfer all pending request data into the endpoint and/or + * transfer all pending data in the endpoint into usb requests. + * + * Is always called from the interrupt handler. ep->lock must not be held. + */ +static void handle_ep(struct pxa_ep *ep) +{ + struct pxa27x_request *req; + int completed; + u32 udccsr; + int is_in = ep->dir_in; + int loop = 0; + unsigned long flags; + + spin_lock_irqsave(&ep->lock, flags); + if (ep->in_handle_ep) + goto recursion_detected; + ep->in_handle_ep = 1; + + do { + completed = 0; + udccsr = udc_ep_readl(ep, UDCCSR); + + if (likely(!list_empty(&ep->queue))) + req = list_entry(ep->queue.next, + struct pxa27x_request, queue); + else + req = NULL; + + ep_dbg(ep, "req:%p, udccsr 0x%03x loop=%d\n", + req, udccsr, loop++); + + if (unlikely(udccsr & (UDCCSR_SST | UDCCSR_TRN))) + udc_ep_writel(ep, UDCCSR, + udccsr & (UDCCSR_SST | UDCCSR_TRN)); + if (!req) + break; + + if (unlikely(is_in)) { + if (likely(!ep_is_full(ep))) + completed = write_fifo(ep, req); + } else { + if (likely(epout_has_pkt(ep))) + completed = read_fifo(ep, req); + } + + if (completed) { + if (is_in) + ep_end_in_req(ep, req, &flags); + else + ep_end_out_req(ep, req, &flags); + } + } while (completed); + + ep->in_handle_ep = 0; +recursion_detected: + spin_unlock_irqrestore(&ep->lock, flags); +} + +/** + * pxa27x_change_configuration - Handle SET_CONF usb request notification + * @udc: udc device + * @config: usb configuration + * + * Post the request to upper level. + * Don't use any pxa specific harware configuration capabilities + */ +static void pxa27x_change_configuration(struct pxa_udc *udc, int config) +{ + struct usb_ctrlrequest req ; + + dev_dbg(udc->dev, "config=%d\n", config); + + udc->config = config; + udc->last_interface = 0; + udc->last_alternate = 0; + + req.bRequestType = 0; + req.bRequest = USB_REQ_SET_CONFIGURATION; + req.wValue = config; + req.wIndex = 0; + req.wLength = 0; + + set_ep0state(udc, WAIT_ACK_SET_CONF_INTERF); + udc->driver->setup(&udc->gadget, &req); + ep_write_UDCCSR(&udc->pxa_ep[0], UDCCSR0_AREN); +} + +/** + * pxa27x_change_interface - Handle SET_INTERF usb request notification + * @udc: udc device + * @iface: interface number + * @alt: alternate setting number + * + * Post the request to upper level. + * Don't use any pxa specific harware configuration capabilities + */ +static void pxa27x_change_interface(struct pxa_udc *udc, int iface, int alt) +{ + struct usb_ctrlrequest req; + + dev_dbg(udc->dev, "interface=%d, alternate setting=%d\n", iface, alt); + + udc->last_interface = iface; + udc->last_alternate = alt; + + req.bRequestType = USB_RECIP_INTERFACE; + req.bRequest = USB_REQ_SET_INTERFACE; + req.wValue = alt; + req.wIndex = iface; + req.wLength = 0; + + set_ep0state(udc, WAIT_ACK_SET_CONF_INTERF); + udc->driver->setup(&udc->gadget, &req); + ep_write_UDCCSR(&udc->pxa_ep[0], UDCCSR0_AREN); +} + +/* + * irq_handle_data - Handle data transfer + * @irq: irq IRQ number + * @udc: dev pxa_udc device structure + * + * Called from irq handler, transferts data to or from endpoint to queue + */ +static void irq_handle_data(int irq, struct pxa_udc *udc) +{ + int i; + struct pxa_ep *ep; + u32 udcisr0 = udc_readl(udc, UDCISR0) & UDCCISR0_EP_MASK; + u32 udcisr1 = udc_readl(udc, UDCISR1) & UDCCISR1_EP_MASK; + + if (udcisr0 & UDCISR_INT_MASK) { + udc->pxa_ep[0].stats.irqs++; + udc_writel(udc, UDCISR0, UDCISR_INT(0, UDCISR_INT_MASK)); + handle_ep0(udc, !!(udcisr0 & UDCICR_FIFOERR), + !!(udcisr0 & UDCICR_PKTCOMPL)); + } + + udcisr0 >>= 2; + for (i = 1; udcisr0 != 0 && i < 16; udcisr0 >>= 2, i++) { + if (!(udcisr0 & UDCISR_INT_MASK)) + continue; + + udc_writel(udc, UDCISR0, UDCISR_INT(i, UDCISR_INT_MASK)); + + WARN_ON(i >= ARRAY_SIZE(udc->pxa_ep)); + if (i < ARRAY_SIZE(udc->pxa_ep)) { + ep = &udc->pxa_ep[i]; + ep->stats.irqs++; + handle_ep(ep); + } + } + + for (i = 16; udcisr1 != 0 && i < 24; udcisr1 >>= 2, i++) { + udc_writel(udc, UDCISR1, UDCISR_INT(i - 16, UDCISR_INT_MASK)); + if (!(udcisr1 & UDCISR_INT_MASK)) + continue; + + WARN_ON(i >= ARRAY_SIZE(udc->pxa_ep)); + if (i < ARRAY_SIZE(udc->pxa_ep)) { + ep = &udc->pxa_ep[i]; + ep->stats.irqs++; + handle_ep(ep); + } + } + +} + +/** + * irq_udc_suspend - Handle IRQ "UDC Suspend" + * @udc: udc device + */ +static void irq_udc_suspend(struct pxa_udc *udc) +{ + udc_writel(udc, UDCISR1, UDCISR1_IRSU); + udc->stats.irqs_suspend++; + + if (udc->gadget.speed != USB_SPEED_UNKNOWN + && udc->driver && udc->driver->suspend) + udc->driver->suspend(&udc->gadget); + ep0_idle(udc); +} + +/** + * irq_udc_resume - Handle IRQ "UDC Resume" + * @udc: udc device + */ +static void irq_udc_resume(struct pxa_udc *udc) +{ + udc_writel(udc, UDCISR1, UDCISR1_IRRU); + udc->stats.irqs_resume++; + + if (udc->gadget.speed != USB_SPEED_UNKNOWN + && udc->driver && udc->driver->resume) + udc->driver->resume(&udc->gadget); +} + +/** + * irq_udc_reconfig - Handle IRQ "UDC Change Configuration" + * @udc: udc device + */ +static void irq_udc_reconfig(struct pxa_udc *udc) +{ + unsigned config, interface, alternate, config_change; + u32 udccr = udc_readl(udc, UDCCR); + + udc_writel(udc, UDCISR1, UDCISR1_IRCC); + udc->stats.irqs_reconfig++; + + config = (udccr & UDCCR_ACN) >> UDCCR_ACN_S; + config_change = (config != udc->config); + pxa27x_change_configuration(udc, config); + + interface = (udccr & UDCCR_AIN) >> UDCCR_AIN_S; + alternate = (udccr & UDCCR_AAISN) >> UDCCR_AAISN_S; + pxa27x_change_interface(udc, interface, alternate); + + if (config_change) + update_pxa_ep_matches(udc); + udc_set_mask_UDCCR(udc, UDCCR_SMAC); +} + +/** + * irq_udc_reset - Handle IRQ "UDC Reset" + * @udc: udc device + */ +static void irq_udc_reset(struct pxa_udc *udc) +{ + u32 udccr = udc_readl(udc, UDCCR); + struct pxa_ep *ep = &udc->pxa_ep[0]; + + dev_info(udc->dev, "USB reset\n"); + udc_writel(udc, UDCISR1, UDCISR1_IRRS); + udc->stats.irqs_reset++; + + if ((udccr & UDCCR_UDA) == 0) { + dev_dbg(udc->dev, "USB reset start\n"); + stop_activity(udc); + } + udc->gadget.speed = USB_SPEED_FULL; + memset(&udc->stats, 0, sizeof udc->stats); + + nuke(ep, -EPROTO); + ep_write_UDCCSR(ep, UDCCSR0_FTF | UDCCSR0_OPC); + ep0_idle(udc); +} + +/** + * pxa_udc_irq - Main irq handler + * @irq: irq number + * @_dev: udc device + * + * Handles all udc interrupts + */ +static irqreturn_t pxa_udc_irq(int irq, void *_dev) +{ + struct pxa_udc *udc = _dev; + u32 udcisr0 = udc_readl(udc, UDCISR0); + u32 udcisr1 = udc_readl(udc, UDCISR1); + u32 udccr = udc_readl(udc, UDCCR); + u32 udcisr1_spec; + + dev_vdbg(udc->dev, "Interrupt, UDCISR0:0x%08x, UDCISR1:0x%08x, " + "UDCCR:0x%08x\n", udcisr0, udcisr1, udccr); + + udcisr1_spec = udcisr1 & 0xf8000000; + if (unlikely(udcisr1_spec & UDCISR1_IRSU)) + irq_udc_suspend(udc); + if (unlikely(udcisr1_spec & UDCISR1_IRRU)) + irq_udc_resume(udc); + if (unlikely(udcisr1_spec & UDCISR1_IRCC)) + irq_udc_reconfig(udc); + if (unlikely(udcisr1_spec & UDCISR1_IRRS)) + irq_udc_reset(udc); + + if ((udcisr0 & UDCCISR0_EP_MASK) | (udcisr1 & UDCCISR1_EP_MASK)) + irq_handle_data(irq, udc); + + return IRQ_HANDLED; +} + +static struct pxa_udc memory = { + .gadget = { + .ops = &pxa_udc_ops, + .ep0 = &memory.udc_usb_ep[0].usb_ep, + .name = driver_name, + .dev = { + .init_name = "gadget", + }, + }, + + .udc_usb_ep = { + USB_EP_CTRL, + USB_EP_OUT_BULK(1), + USB_EP_IN_BULK(2), + USB_EP_IN_ISO(3), + USB_EP_OUT_ISO(4), + USB_EP_IN_INT(5), + }, + + .pxa_ep = { + PXA_EP_CTRL, + /* Endpoints for gadget zero */ + PXA_EP_OUT_BULK(1, 1, 3, 0, 0), + PXA_EP_IN_BULK(2, 2, 3, 0, 0), + /* Endpoints for ether gadget, file storage gadget */ + PXA_EP_OUT_BULK(3, 1, 1, 0, 0), + PXA_EP_IN_BULK(4, 2, 1, 0, 0), + PXA_EP_IN_ISO(5, 3, 1, 0, 0), + PXA_EP_OUT_ISO(6, 4, 1, 0, 0), + PXA_EP_IN_INT(7, 5, 1, 0, 0), + /* Endpoints for RNDIS, serial */ + PXA_EP_OUT_BULK(8, 1, 2, 0, 0), + PXA_EP_IN_BULK(9, 2, 2, 0, 0), + PXA_EP_IN_INT(10, 5, 2, 0, 0), + /* + * All the following endpoints are only for completion. They + * won't never work, as multiple interfaces are really broken on + * the pxa. + */ + PXA_EP_OUT_BULK(11, 1, 2, 1, 0), + PXA_EP_IN_BULK(12, 2, 2, 1, 0), + /* Endpoint for CDC Ether */ + PXA_EP_OUT_BULK(13, 1, 1, 1, 1), + PXA_EP_IN_BULK(14, 2, 1, 1, 1), + } +}; + +#if defined(CONFIG_OF) +static const struct of_device_id udc_pxa_dt_ids[] = { + { .compatible = "marvell,pxa270-udc" }, + {} +}; +MODULE_DEVICE_TABLE(of, udc_pxa_dt_ids); +#endif + +/** + * pxa_udc_probe - probes the udc device + * @pdev: platform device + * + * Perform basic init : allocates udc clock, creates sysfs files, requests + * irq. + */ +static int pxa_udc_probe(struct platform_device *pdev) +{ + struct pxa_udc *udc = &memory; + int retval = 0, gpio; + struct pxa2xx_udc_mach_info *mach = dev_get_platdata(&pdev->dev); + unsigned long gpio_flags; + + if (mach) { + gpio_flags = mach->gpio_pullup_inverted ? GPIOF_ACTIVE_LOW : 0; + gpio = mach->gpio_pullup; + if (gpio_is_valid(gpio)) { + retval = devm_gpio_request_one(&pdev->dev, gpio, + gpio_flags, + "USB D+ pullup"); + if (retval) + return retval; + udc->gpiod = gpio_to_desc(mach->gpio_pullup); + } + udc->udc_command = mach->udc_command; + } else { + udc->gpiod = devm_gpiod_get(&pdev->dev, NULL, GPIOD_ASIS); + } + + udc->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(udc->regs)) + return PTR_ERR(udc->regs); + udc->irq = platform_get_irq(pdev, 0); + if (udc->irq < 0) + return udc->irq; + + udc->dev = &pdev->dev; + if (of_have_populated_dt()) { + udc->transceiver = + devm_usb_get_phy_by_phandle(udc->dev, "phys", 0); + if (IS_ERR(udc->transceiver)) + return PTR_ERR(udc->transceiver); + } else { + udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); + } + + if (IS_ERR(udc->gpiod)) { + dev_err(&pdev->dev, "Couldn't find or request D+ gpio : %ld\n", + PTR_ERR(udc->gpiod)); + return PTR_ERR(udc->gpiod); + } + if (udc->gpiod) + gpiod_direction_output(udc->gpiod, 0); + + udc->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(udc->clk)) + return PTR_ERR(udc->clk); + + retval = clk_prepare(udc->clk); + if (retval) + return retval; + + udc->vbus_sensed = 0; + + the_controller = udc; + platform_set_drvdata(pdev, udc); + udc_init_data(udc); + + /* irq setup after old hardware state is cleaned up */ + retval = devm_request_irq(&pdev->dev, udc->irq, pxa_udc_irq, + IRQF_SHARED, driver_name, udc); + if (retval != 0) { + dev_err(udc->dev, "%s: can't get irq %i, err %d\n", + driver_name, udc->irq, retval); + goto err; + } + + if (!IS_ERR_OR_NULL(udc->transceiver)) + usb_register_notifier(udc->transceiver, &pxa27x_udc_phy); + retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget); + if (retval) + goto err_add_gadget; + + pxa_init_debugfs(udc); + if (should_enable_udc(udc)) + udc_enable(udc); + return 0; + +err_add_gadget: + if (!IS_ERR_OR_NULL(udc->transceiver)) + usb_unregister_notifier(udc->transceiver, &pxa27x_udc_phy); +err: + clk_unprepare(udc->clk); + return retval; +} + +/** + * pxa_udc_remove - removes the udc device driver + * @_dev: platform device + */ +static int pxa_udc_remove(struct platform_device *_dev) +{ + struct pxa_udc *udc = platform_get_drvdata(_dev); + + usb_del_gadget_udc(&udc->gadget); + pxa_cleanup_debugfs(udc); + + if (!IS_ERR_OR_NULL(udc->transceiver)) { + usb_unregister_notifier(udc->transceiver, &pxa27x_udc_phy); + usb_put_phy(udc->transceiver); + } + + udc->transceiver = NULL; + the_controller = NULL; + clk_unprepare(udc->clk); + + return 0; +} + +static void pxa_udc_shutdown(struct platform_device *_dev) +{ + struct pxa_udc *udc = platform_get_drvdata(_dev); + + if (udc_readl(udc, UDCCR) & UDCCR_UDE) + udc_disable(udc); +} + +#ifdef CONFIG_PXA27x +extern void pxa27x_clear_otgph(void); +#else +#define pxa27x_clear_otgph() do {} while (0) +#endif + +#ifdef CONFIG_PM +/** + * pxa_udc_suspend - Suspend udc device + * @_dev: platform device + * @state: suspend state + * + * Suspends udc : saves configuration registers (UDCCR*), then disables the udc + * device. + */ +static int pxa_udc_suspend(struct platform_device *_dev, pm_message_t state) +{ + struct pxa_udc *udc = platform_get_drvdata(_dev); + struct pxa_ep *ep; + + ep = &udc->pxa_ep[0]; + udc->udccsr0 = udc_ep_readl(ep, UDCCSR); + + udc_disable(udc); + udc->pullup_resume = udc->pullup_on; + dplus_pullup(udc, 0); + + if (udc->driver) + udc->driver->disconnect(&udc->gadget); + + return 0; +} + +/** + * pxa_udc_resume - Resume udc device + * @_dev: platform device + * + * Resumes udc : restores configuration registers (UDCCR*), then enables the udc + * device. + */ +static int pxa_udc_resume(struct platform_device *_dev) +{ + struct pxa_udc *udc = platform_get_drvdata(_dev); + struct pxa_ep *ep; + + ep = &udc->pxa_ep[0]; + udc_ep_writel(ep, UDCCSR, udc->udccsr0 & (UDCCSR0_FST | UDCCSR0_DME)); + + dplus_pullup(udc, udc->pullup_resume); + if (should_enable_udc(udc)) + udc_enable(udc); + /* + * We do not handle OTG yet. + * + * OTGPH bit is set when sleep mode is entered. + * it indicates that OTG pad is retaining its state. + * Upon exit from sleep mode and before clearing OTGPH, + * Software must configure the USB OTG pad, UDC, and UHC + * to the state they were in before entering sleep mode. + */ + pxa27x_clear_otgph(); + + return 0; +} +#endif + +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:pxa27x-udc"); + +static struct platform_driver udc_driver = { + .driver = { + .name = "pxa27x-udc", + .of_match_table = of_match_ptr(udc_pxa_dt_ids), + }, + .probe = pxa_udc_probe, + .remove = pxa_udc_remove, + .shutdown = pxa_udc_shutdown, +#ifdef CONFIG_PM + .suspend = pxa_udc_suspend, + .resume = pxa_udc_resume +#endif +}; + +module_platform_driver(udc_driver); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Robert Jarzmik"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/udc/pxa27x_udc.h b/drivers/usb/gadget/udc/pxa27x_udc.h new file mode 100644 index 000000000..31bf79ce9 --- /dev/null +++ b/drivers/usb/gadget/udc/pxa27x_udc.h @@ -0,0 +1,498 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * linux/drivers/usb/gadget/pxa27x_udc.h + * Intel PXA27x on-chip full speed USB device controller + * + * Inspired by original driver by Frank Becker, David Brownell, and others. + * Copyright (C) 2008 Robert Jarzmik + */ + +#ifndef __LINUX_USB_GADGET_PXA27X_H +#define __LINUX_USB_GADGET_PXA27X_H + +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <linux/usb/otg.h> + +/* + * Register definitions + */ +/* Offsets */ +#define UDCCR 0x0000 /* UDC Control Register */ +#define UDCICR0 0x0004 /* UDC Interrupt Control Register0 */ +#define UDCICR1 0x0008 /* UDC Interrupt Control Register1 */ +#define UDCISR0 0x000C /* UDC Interrupt Status Register 0 */ +#define UDCISR1 0x0010 /* UDC Interrupt Status Register 1 */ +#define UDCFNR 0x0014 /* UDC Frame Number Register */ +#define UDCOTGICR 0x0018 /* UDC On-The-Go interrupt control */ +#define UP2OCR 0x0020 /* USB Port 2 Output Control register */ +#define UP3OCR 0x0024 /* USB Port 3 Output Control register */ +#define UDCCSRn(x) (0x0100 + ((x)<<2)) /* UDC Control/Status register */ +#define UDCBCRn(x) (0x0200 + ((x)<<2)) /* UDC Byte Count Register */ +#define UDCDRn(x) (0x0300 + ((x)<<2)) /* UDC Data Register */ +#define UDCCRn(x) (0x0400 + ((x)<<2)) /* UDC Control Register */ + +#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */ +#define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation + Protocol Port Support */ +#define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol + Support */ +#define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol + Enable */ +#define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */ +#define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */ +#define UDCCR_ACN_S 11 +#define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */ +#define UDCCR_AIN_S 8 +#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface + Setting Number */ +#define UDCCR_AAISN_S 5 +#define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active + Configuration */ +#define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration + Error */ +#define UDCCR_UDR (1 << 2) /* UDC Resume */ +#define UDCCR_UDA (1 << 1) /* UDC Active */ +#define UDCCR_UDE (1 << 0) /* UDC Enable */ + +#define UDCICR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) +#define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */ +#define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */ +#define UDCICR1_IERU (1 << 29) /* IntEn - Resume */ +#define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */ +#define UDCICR1_IERS (1 << 27) /* IntEn - Reset */ +#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */ +#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */ +#define UDCICR_INT_MASK (UDCICR_FIFOERR | UDCICR_PKTCOMPL) + +#define UDCISR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) +#define UDCISR1_IRCC (1 << 31) /* IntReq - Configuration Change */ +#define UDCISR1_IRSOF (1 << 30) /* IntReq - Start of Frame */ +#define UDCISR1_IRRU (1 << 29) /* IntReq - Resume */ +#define UDCISR1_IRSU (1 << 28) /* IntReq - Suspend */ +#define UDCISR1_IRRS (1 << 27) /* IntReq - Reset */ +#define UDCISR_INT_MASK (UDCICR_FIFOERR | UDCICR_PKTCOMPL) + +#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */ +#define UDCOTGICR_IEXR (1 << 17) /* Extra Transceiver Interrupt + Rising Edge Interrupt Enable */ +#define UDCOTGICR_IEXF (1 << 16) /* Extra Transceiver Interrupt + Falling Edge Interrupt Enable */ +#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge + Interrupt Enable */ +#define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge + Interrupt Enable */ +#define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge + Interrupt Enable */ +#define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge + Interrupt Enable */ +#define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge + Interrupt Enable */ +#define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge + Interrupt Enable */ +#define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising + Edge Interrupt Enable */ +#define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling + Edge Interrupt Enable */ +#define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge + Interrupt Enable */ +#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge + Interrupt Enable */ + +/* Host Port 2 field bits */ +#define UP2OCR_CPVEN (1 << 0) /* Charge Pump Vbus Enable */ +#define UP2OCR_CPVPE (1 << 1) /* Charge Pump Vbus Pulse Enable */ + /* Transceiver enablers */ +#define UP2OCR_DPPDE (1 << 2) /* D+ Pull Down Enable */ +#define UP2OCR_DMPDE (1 << 3) /* D- Pull Down Enable */ +#define UP2OCR_DPPUE (1 << 4) /* D+ Pull Up Enable */ +#define UP2OCR_DMPUE (1 << 5) /* D- Pull Up Enable */ +#define UP2OCR_DPPUBE (1 << 6) /* D+ Pull Up Bypass Enable */ +#define UP2OCR_DMPUBE (1 << 7) /* D- Pull Up Bypass Enable */ +#define UP2OCR_EXSP (1 << 8) /* External Transceiver Speed Control */ +#define UP2OCR_EXSUS (1 << 9) /* External Transceiver Speed Enable */ +#define UP2OCR_IDON (1 << 10) /* OTG ID Read Enable */ +#define UP2OCR_HXS (1 << 16) /* Transceiver Output Select */ +#define UP2OCR_HXOE (1 << 17) /* Transceiver Output Enable */ +#define UP2OCR_SEOS (1 << 24) /* Single-Ended Output Select */ + +#define UDCCSR0_ACM (1 << 9) /* Ack Control Mode */ +#define UDCCSR0_AREN (1 << 8) /* Ack Response Enable */ +#define UDCCSR0_SA (1 << 7) /* Setup Active */ +#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */ +#define UDCCSR0_FST (1 << 5) /* Force Stall */ +#define UDCCSR0_SST (1 << 4) /* Sent Stall */ +#define UDCCSR0_DME (1 << 3) /* DMA Enable */ +#define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */ +#define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */ +#define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */ + +#define UDCCSR_DPE (1 << 9) /* Data Packet Error */ +#define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */ +#define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */ +#define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */ +#define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */ +#define UDCCSR_FST (1 << 5) /* Force STALL */ +#define UDCCSR_SST (1 << 4) /* Sent STALL */ +#define UDCCSR_DME (1 << 3) /* DMA Enable */ +#define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */ +#define UDCCSR_PC (1 << 1) /* Packet Complete */ +#define UDCCSR_FS (1 << 0) /* FIFO needs service */ + +#define UDCCONR_CN (0x03 << 25) /* Configuration Number */ +#define UDCCONR_CN_S 25 +#define UDCCONR_IN (0x07 << 22) /* Interface Number */ +#define UDCCONR_IN_S 22 +#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */ +#define UDCCONR_AISN_S 19 +#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */ +#define UDCCONR_EN_S 15 +#define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */ +#define UDCCONR_ET_S 13 +#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */ +#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */ +#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */ +#define UDCCONR_ET_NU (0x00 << 13) /* Not used */ +#define UDCCONR_ED (1 << 12) /* Endpoint Direction */ +#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */ +#define UDCCONR_MPS_S 2 +#define UDCCONR_DE (1 << 1) /* Double Buffering Enable */ +#define UDCCONR_EE (1 << 0) /* Endpoint Enable */ + +#define UDCCR_MASK_BITS (UDCCR_OEN | UDCCR_SMAC | UDCCR_UDR | UDCCR_UDE) +#define UDCCSR_WR_MASK (UDCCSR_DME | UDCCSR_FST) +#define UDC_FNR_MASK (0x7ff) +#define UDC_BCR_MASK (0x3ff) + +/* + * UDCCR = UDC Endpoint Configuration Registers + * UDCCSR = UDC Control/Status Register for this EP + * UDCBCR = UDC Byte Count Remaining (contents of OUT fifo) + * UDCDR = UDC Endpoint Data Register (the fifo) + */ +#define ofs_UDCCR(ep) (UDCCRn(ep->idx)) +#define ofs_UDCCSR(ep) (UDCCSRn(ep->idx)) +#define ofs_UDCBCR(ep) (UDCBCRn(ep->idx)) +#define ofs_UDCDR(ep) (UDCDRn(ep->idx)) + +/* Register access macros */ +#define udc_ep_readl(ep, reg) \ + __raw_readl((ep)->dev->regs + ofs_##reg(ep)) +#define udc_ep_writel(ep, reg, value) \ + __raw_writel((value), ep->dev->regs + ofs_##reg(ep)) +#define udc_ep_readb(ep, reg) \ + __raw_readb((ep)->dev->regs + ofs_##reg(ep)) +#define udc_ep_writeb(ep, reg, value) \ + __raw_writeb((value), ep->dev->regs + ofs_##reg(ep)) +#define udc_readl(dev, reg) \ + __raw_readl((dev)->regs + (reg)) +#define udc_writel(udc, reg, value) \ + __raw_writel((value), (udc)->regs + (reg)) + +#define UDCCSR_MASK (UDCCSR_FST | UDCCSR_DME) +#define UDCCISR0_EP_MASK ~0 +#define UDCCISR1_EP_MASK 0xffff +#define UDCCSR0_CTRL_REQ_MASK (UDCCSR0_OPC | UDCCSR0_SA | UDCCSR0_RNE) + +#define EPIDX(ep) (ep->idx) +#define EPADDR(ep) (ep->addr) +#define EPXFERTYPE(ep) (ep->type) +#define EPNAME(ep) (ep->name) +#define is_ep0(ep) (!ep->idx) +#define EPXFERTYPE_is_ISO(ep) (EPXFERTYPE(ep) == USB_ENDPOINT_XFER_ISOC) + +/* + * Endpoint definitions + * + * Once enabled, pxa endpoint configuration is freezed, and cannot change + * unless a reset happens or the udc is disabled. + * Therefore, we must define all pxa potential endpoint definitions needed for + * all gadget and set them up before the udc is enabled. + * + * As the architecture chosen is fully static, meaning the pxa endpoint + * configurations are set up once and for all, we must provide a way to match + * one usb endpoint (usb_ep) to several pxa endpoints. The reason is that gadget + * layer autoconf doesn't choose the usb_ep endpoint on (config, interface, alt) + * criteria, while the pxa architecture requires that. + * + * The solution is to define several pxa endpoints matching one usb_ep. Ex: + * - "ep1-in" matches pxa endpoint EPA (which is an IN ep at addr 1, when + * the udc talks on (config=3, interface=0, alt=0) + * - "ep1-in" matches pxa endpoint EPB (which is an IN ep at addr 1, when + * the udc talks on (config=3, interface=0, alt=1) + * - "ep1-in" matches pxa endpoint EPC (which is an IN ep at addr 1, when + * the udc talks on (config=2, interface=0, alt=0) + * + * We'll define the pxa endpoint by its index (EPA => idx=1, EPB => idx=2, ...) + */ + +/* + * Endpoint definition helpers + */ +#define USB_EP_DEF(addr, bname, dir, type, maxpkt, ctype, cdir) \ +{ .usb_ep = { .name = bname, .ops = &pxa_ep_ops, .maxpacket = maxpkt, \ + .caps = USB_EP_CAPS(ctype, cdir), }, \ + .desc = { .bEndpointAddress = addr | (dir ? USB_DIR_IN : 0), \ + .bmAttributes = USB_ENDPOINT_XFER_ ## type, \ + .wMaxPacketSize = maxpkt, }, \ + .dev = &memory \ +} +#define USB_EP_BULK(addr, bname, dir, cdir) \ + USB_EP_DEF(addr, bname, dir, BULK, BULK_FIFO_SIZE, \ + USB_EP_CAPS_TYPE_BULK, cdir) +#define USB_EP_ISO(addr, bname, dir, cdir) \ + USB_EP_DEF(addr, bname, dir, ISOC, ISO_FIFO_SIZE, \ + USB_EP_CAPS_TYPE_ISO, cdir) +#define USB_EP_INT(addr, bname, dir, cdir) \ + USB_EP_DEF(addr, bname, dir, INT, INT_FIFO_SIZE, \ + USB_EP_CAPS_TYPE_INT, cdir) +#define USB_EP_IN_BULK(n) USB_EP_BULK(n, "ep" #n "in-bulk", 1, \ + USB_EP_CAPS_DIR_IN) +#define USB_EP_OUT_BULK(n) USB_EP_BULK(n, "ep" #n "out-bulk", 0, \ + USB_EP_CAPS_DIR_OUT) +#define USB_EP_IN_ISO(n) USB_EP_ISO(n, "ep" #n "in-iso", 1, \ + USB_EP_CAPS_DIR_IN) +#define USB_EP_OUT_ISO(n) USB_EP_ISO(n, "ep" #n "out-iso", 0, \ + USB_EP_CAPS_DIR_OUT) +#define USB_EP_IN_INT(n) USB_EP_INT(n, "ep" #n "in-int", 1, \ + USB_EP_CAPS_DIR_IN) +#define USB_EP_CTRL USB_EP_DEF(0, "ep0", 0, CONTROL, EP0_FIFO_SIZE, \ + USB_EP_CAPS_TYPE_CONTROL, USB_EP_CAPS_DIR_ALL) + +#define PXA_EP_DEF(_idx, _addr, dir, _type, maxpkt, _config, iface, altset) \ +{ \ + .dev = &memory, \ + .name = "ep" #_idx, \ + .idx = _idx, .enabled = 0, \ + .dir_in = dir, .addr = _addr, \ + .config = _config, .interface = iface, .alternate = altset, \ + .type = _type, .fifo_size = maxpkt, \ +} +#define PXA_EP_BULK(_idx, addr, dir, config, iface, alt) \ + PXA_EP_DEF(_idx, addr, dir, USB_ENDPOINT_XFER_BULK, BULK_FIFO_SIZE, \ + config, iface, alt) +#define PXA_EP_ISO(_idx, addr, dir, config, iface, alt) \ + PXA_EP_DEF(_idx, addr, dir, USB_ENDPOINT_XFER_ISOC, ISO_FIFO_SIZE, \ + config, iface, alt) +#define PXA_EP_INT(_idx, addr, dir, config, iface, alt) \ + PXA_EP_DEF(_idx, addr, dir, USB_ENDPOINT_XFER_INT, INT_FIFO_SIZE, \ + config, iface, alt) +#define PXA_EP_IN_BULK(i, adr, c, f, a) PXA_EP_BULK(i, adr, 1, c, f, a) +#define PXA_EP_OUT_BULK(i, adr, c, f, a) PXA_EP_BULK(i, adr, 0, c, f, a) +#define PXA_EP_IN_ISO(i, adr, c, f, a) PXA_EP_ISO(i, adr, 1, c, f, a) +#define PXA_EP_OUT_ISO(i, adr, c, f, a) PXA_EP_ISO(i, adr, 0, c, f, a) +#define PXA_EP_IN_INT(i, adr, c, f, a) PXA_EP_INT(i, adr, 1, c, f, a) +#define PXA_EP_CTRL PXA_EP_DEF(0, 0, 0, 0, EP0_FIFO_SIZE, 0, 0, 0) + +struct pxa27x_udc; + +struct stats { + unsigned long in_ops; + unsigned long out_ops; + unsigned long in_bytes; + unsigned long out_bytes; + unsigned long irqs; +}; + +/** + * struct udc_usb_ep - container of each usb_ep structure + * @usb_ep: usb endpoint + * @desc: usb descriptor, especially type and address + * @dev: udc managing this endpoint + * @pxa_ep: matching pxa_ep (cache of find_pxa_ep() call) + */ +struct udc_usb_ep { + struct usb_ep usb_ep; + struct usb_endpoint_descriptor desc; + struct pxa_udc *dev; + struct pxa_ep *pxa_ep; +}; + +/** + * struct pxa_ep - pxa endpoint + * @dev: udc device + * @queue: requests queue + * @lock: lock to pxa_ep data (queues and stats) + * @enabled: true when endpoint enabled (not stopped by gadget layer) + * @in_handle_ep: number of recursions of handle_ep() function + * Prevents deadlocks or infinite recursions of types : + * irq->handle_ep()->req_done()->req.complete()->pxa_ep_queue()->handle_ep() + * or + * pxa_ep_queue()->handle_ep()->req_done()->req.complete()->pxa_ep_queue() + * @idx: endpoint index (1 => epA, 2 => epB, ..., 24 => epX) + * @name: endpoint name (for trace/debug purpose) + * @dir_in: 1 if IN endpoint, 0 if OUT endpoint + * @addr: usb endpoint number + * @config: configuration in which this endpoint is active + * @interface: interface in which this endpoint is active + * @alternate: altsetting in which this endpoint is active + * @fifo_size: max packet size in the endpoint fifo + * @type: endpoint type (bulk, iso, int, ...) + * @udccsr_value: save register of UDCCSR0 for suspend/resume + * @udccr_value: save register of UDCCR for suspend/resume + * @stats: endpoint statistics + * + * The *PROBLEM* is that pxa's endpoint configuration scheme is both misdesigned + * (cares about config/interface/altsetting, thus placing needless limits on + * device capability) and full of implementation bugs forcing it to be set up + * for use more or less like a pxa255. + * + * As we define the pxa_ep statically, we must guess all needed pxa_ep for all + * gadget which may work with this udc driver. + */ +struct pxa_ep { + struct pxa_udc *dev; + + struct list_head queue; + spinlock_t lock; /* Protects this structure */ + /* (queues, stats) */ + unsigned enabled:1; + unsigned in_handle_ep:1; + + unsigned idx:5; + char *name; + + /* + * Specific pxa endpoint data, needed for hardware initialization + */ + unsigned dir_in:1; + unsigned addr:4; + unsigned config:2; + unsigned interface:3; + unsigned alternate:3; + unsigned fifo_size; + unsigned type; + +#ifdef CONFIG_PM + u32 udccsr_value; + u32 udccr_value; +#endif + struct stats stats; +}; + +/** + * struct pxa27x_request - container of each usb_request structure + * @req: usb request + * @udc_usb_ep: usb endpoint the request was submitted on + * @in_use: sanity check if request already queued on an pxa_ep + * @queue: linked list of requests, linked on pxa_ep->queue + */ +struct pxa27x_request { + struct usb_request req; + struct udc_usb_ep *udc_usb_ep; + unsigned in_use:1; + struct list_head queue; +}; + +enum ep0_state { + WAIT_FOR_SETUP, + SETUP_STAGE, + IN_DATA_STAGE, + OUT_DATA_STAGE, + IN_STATUS_STAGE, + OUT_STATUS_STAGE, + STALL, + WAIT_ACK_SET_CONF_INTERF +}; + +static char *ep0_state_name[] = { + "WAIT_FOR_SETUP", "SETUP_STAGE", "IN_DATA_STAGE", "OUT_DATA_STAGE", + "IN_STATUS_STAGE", "OUT_STATUS_STAGE", "STALL", + "WAIT_ACK_SET_CONF_INTERF" +}; +#define EP0_STNAME(udc) ep0_state_name[(udc)->ep0state] + +#define EP0_FIFO_SIZE 16U +#define BULK_FIFO_SIZE 64U +#define ISO_FIFO_SIZE 256U +#define INT_FIFO_SIZE 16U + +struct udc_stats { + unsigned long irqs_reset; + unsigned long irqs_suspend; + unsigned long irqs_resume; + unsigned long irqs_reconfig; +}; + +#define NR_USB_ENDPOINTS (1 + 5) /* ep0 + ep1in-bulk + .. + ep3in-iso */ +#define NR_PXA_ENDPOINTS (1 + 14) /* ep0 + epA + epB + .. + epX */ + +/** + * struct pxa_udc - udc structure + * @regs: mapped IO space + * @irq: udc irq + * @clk: udc clock + * @usb_gadget: udc gadget structure + * @driver: bound gadget (zero, g_ether, g_mass_storage, ...) + * @dev: device + * @udc_command: machine specific function to activate D+ pullup + * @gpiod: gpio descriptor of gpio for D+ pullup (or NULL if none) + * @transceiver: external transceiver to handle vbus sense and D+ pullup + * @ep0state: control endpoint state machine state + * @stats: statistics on udc usage + * @udc_usb_ep: array of usb endpoints offered by the gadget + * @pxa_ep: array of pxa available endpoints + * @enabled: UDC was enabled by a previous udc_enable() + * @pullup_on: if pullup resistor connected to D+ pin + * @pullup_resume: if pullup resistor should be connected to D+ pin on resume + * @config: UDC active configuration + * @last_interface: UDC interface of the last SET_INTERFACE host request + * @last_alternate: UDC altsetting of the last SET_INTERFACE host request + * @udccsr0: save of udccsr0 in case of suspend + * @debugfs_state: debugfs entry for "udcstate" + * @debugfs_queues: debugfs entry for "queues" + * @debugfs_eps: debugfs entry for "epstate" + */ +struct pxa_udc { + void __iomem *regs; + int irq; + struct clk *clk; + + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + struct device *dev; + void (*udc_command)(int); + struct gpio_desc *gpiod; + struct usb_phy *transceiver; + + enum ep0_state ep0state; + struct udc_stats stats; + + struct udc_usb_ep udc_usb_ep[NR_USB_ENDPOINTS]; + struct pxa_ep pxa_ep[NR_PXA_ENDPOINTS]; + + unsigned enabled:1; + unsigned pullup_on:1; + unsigned pullup_resume:1; + unsigned vbus_sensed:1; + unsigned config:2; + unsigned last_interface:3; + unsigned last_alternate:3; + +#ifdef CONFIG_PM + unsigned udccsr0; +#endif +}; +#define to_pxa(g) (container_of((g), struct pxa_udc, gadget)) + +static inline struct pxa_udc *to_gadget_udc(struct usb_gadget *gadget) +{ + return container_of(gadget, struct pxa_udc, gadget); +} + +/* + * Debugging/message support + */ +#define ep_dbg(ep, fmt, arg...) \ + dev_dbg(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg) +#define ep_vdbg(ep, fmt, arg...) \ + dev_vdbg(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg) +#define ep_err(ep, fmt, arg...) \ + dev_err(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg) +#define ep_info(ep, fmt, arg...) \ + dev_info(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg) +#define ep_warn(ep, fmt, arg...) \ + dev_warn(ep->dev->dev, "%s:%s:" fmt, EPNAME(ep), __func__, ## arg) + +#endif /* __LINUX_USB_GADGET_PXA27X_H */ diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c new file mode 100644 index 000000000..38e4d6b50 --- /dev/null +++ b/drivers/usb/gadget/udc/r8a66597-udc.c @@ -0,0 +1,1980 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * R8A66597 UDC (USB gadget) + * + * Copyright (C) 2006-2009 Renesas Solutions Corp. + * + * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> + */ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/dma-mapping.h> + +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + +#include "r8a66597-udc.h" + +#define DRIVER_VERSION "2011-09-26" + +static const char udc_name[] = "r8a66597_udc"; +static const char *r8a66597_ep_name[] = { + "ep0", "ep1", "ep2", "ep3", "ep4", "ep5", "ep6", "ep7", + "ep8", "ep9", +}; + +static void init_controller(struct r8a66597 *r8a66597); +static void disable_controller(struct r8a66597 *r8a66597); +static void irq_ep0_write(struct r8a66597_ep *ep, struct r8a66597_request *req); +static void irq_packet_write(struct r8a66597_ep *ep, + struct r8a66597_request *req); +static int r8a66597_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t gfp_flags); + +static void transfer_complete(struct r8a66597_ep *ep, + struct r8a66597_request *req, int status); + +/*-------------------------------------------------------------------------*/ +static inline u16 get_usb_speed(struct r8a66597 *r8a66597) +{ + return r8a66597_read(r8a66597, DVSTCTR0) & RHST; +} + +static void enable_pipe_irq(struct r8a66597 *r8a66597, u16 pipenum, + unsigned long reg) +{ + u16 tmp; + + tmp = r8a66597_read(r8a66597, INTENB0); + r8a66597_bclr(r8a66597, BEMPE | NRDYE | BRDYE, + INTENB0); + r8a66597_bset(r8a66597, (1 << pipenum), reg); + r8a66597_write(r8a66597, tmp, INTENB0); +} + +static void disable_pipe_irq(struct r8a66597 *r8a66597, u16 pipenum, + unsigned long reg) +{ + u16 tmp; + + tmp = r8a66597_read(r8a66597, INTENB0); + r8a66597_bclr(r8a66597, BEMPE | NRDYE | BRDYE, + INTENB0); + r8a66597_bclr(r8a66597, (1 << pipenum), reg); + r8a66597_write(r8a66597, tmp, INTENB0); +} + +static void r8a66597_usb_connect(struct r8a66597 *r8a66597) +{ + r8a66597_bset(r8a66597, CTRE, INTENB0); + r8a66597_bset(r8a66597, BEMPE | BRDYE, INTENB0); + + r8a66597_bset(r8a66597, DPRPU, SYSCFG0); +} + +static void r8a66597_usb_disconnect(struct r8a66597 *r8a66597) +__releases(r8a66597->lock) +__acquires(r8a66597->lock) +{ + r8a66597_bclr(r8a66597, CTRE, INTENB0); + r8a66597_bclr(r8a66597, BEMPE | BRDYE, INTENB0); + r8a66597_bclr(r8a66597, DPRPU, SYSCFG0); + + r8a66597->gadget.speed = USB_SPEED_UNKNOWN; + spin_unlock(&r8a66597->lock); + r8a66597->driver->disconnect(&r8a66597->gadget); + spin_lock(&r8a66597->lock); + + disable_controller(r8a66597); + init_controller(r8a66597); + r8a66597_bset(r8a66597, VBSE, INTENB0); + INIT_LIST_HEAD(&r8a66597->ep[0].queue); +} + +static inline u16 control_reg_get_pid(struct r8a66597 *r8a66597, u16 pipenum) +{ + u16 pid = 0; + unsigned long offset; + + if (pipenum == 0) { + pid = r8a66597_read(r8a66597, DCPCTR) & PID; + } else if (pipenum < R8A66597_MAX_NUM_PIPE) { + offset = get_pipectr_addr(pipenum); + pid = r8a66597_read(r8a66597, offset) & PID; + } else { + dev_err(r8a66597_to_dev(r8a66597), "unexpect pipe num (%d)\n", + pipenum); + } + + return pid; +} + +static inline void control_reg_set_pid(struct r8a66597 *r8a66597, u16 pipenum, + u16 pid) +{ + unsigned long offset; + + if (pipenum == 0) { + r8a66597_mdfy(r8a66597, pid, PID, DCPCTR); + } else if (pipenum < R8A66597_MAX_NUM_PIPE) { + offset = get_pipectr_addr(pipenum); + r8a66597_mdfy(r8a66597, pid, PID, offset); + } else { + dev_err(r8a66597_to_dev(r8a66597), "unexpect pipe num (%d)\n", + pipenum); + } +} + +static inline void pipe_start(struct r8a66597 *r8a66597, u16 pipenum) +{ + control_reg_set_pid(r8a66597, pipenum, PID_BUF); +} + +static inline void pipe_stop(struct r8a66597 *r8a66597, u16 pipenum) +{ + control_reg_set_pid(r8a66597, pipenum, PID_NAK); +} + +static inline void pipe_stall(struct r8a66597 *r8a66597, u16 pipenum) +{ + control_reg_set_pid(r8a66597, pipenum, PID_STALL); +} + +static inline u16 control_reg_get(struct r8a66597 *r8a66597, u16 pipenum) +{ + u16 ret = 0; + unsigned long offset; + + if (pipenum == 0) { + ret = r8a66597_read(r8a66597, DCPCTR); + } else if (pipenum < R8A66597_MAX_NUM_PIPE) { + offset = get_pipectr_addr(pipenum); + ret = r8a66597_read(r8a66597, offset); + } else { + dev_err(r8a66597_to_dev(r8a66597), "unexpect pipe num (%d)\n", + pipenum); + } + + return ret; +} + +static inline void control_reg_sqclr(struct r8a66597 *r8a66597, u16 pipenum) +{ + unsigned long offset; + + pipe_stop(r8a66597, pipenum); + + if (pipenum == 0) { + r8a66597_bset(r8a66597, SQCLR, DCPCTR); + } else if (pipenum < R8A66597_MAX_NUM_PIPE) { + offset = get_pipectr_addr(pipenum); + r8a66597_bset(r8a66597, SQCLR, offset); + } else { + dev_err(r8a66597_to_dev(r8a66597), "unexpect pipe num (%d)\n", + pipenum); + } +} + +static void control_reg_sqset(struct r8a66597 *r8a66597, u16 pipenum) +{ + unsigned long offset; + + pipe_stop(r8a66597, pipenum); + + if (pipenum == 0) { + r8a66597_bset(r8a66597, SQSET, DCPCTR); + } else if (pipenum < R8A66597_MAX_NUM_PIPE) { + offset = get_pipectr_addr(pipenum); + r8a66597_bset(r8a66597, SQSET, offset); + } else { + dev_err(r8a66597_to_dev(r8a66597), + "unexpect pipe num(%d)\n", pipenum); + } +} + +static u16 control_reg_sqmon(struct r8a66597 *r8a66597, u16 pipenum) +{ + unsigned long offset; + + if (pipenum == 0) { + return r8a66597_read(r8a66597, DCPCTR) & SQMON; + } else if (pipenum < R8A66597_MAX_NUM_PIPE) { + offset = get_pipectr_addr(pipenum); + return r8a66597_read(r8a66597, offset) & SQMON; + } else { + dev_err(r8a66597_to_dev(r8a66597), + "unexpect pipe num(%d)\n", pipenum); + } + + return 0; +} + +static u16 save_usb_toggle(struct r8a66597 *r8a66597, u16 pipenum) +{ + return control_reg_sqmon(r8a66597, pipenum); +} + +static void restore_usb_toggle(struct r8a66597 *r8a66597, u16 pipenum, + u16 toggle) +{ + if (toggle) + control_reg_sqset(r8a66597, pipenum); + else + control_reg_sqclr(r8a66597, pipenum); +} + +static inline int get_buffer_size(struct r8a66597 *r8a66597, u16 pipenum) +{ + u16 tmp; + int size; + + if (pipenum == 0) { + tmp = r8a66597_read(r8a66597, DCPCFG); + if ((tmp & R8A66597_CNTMD) != 0) + size = 256; + else { + tmp = r8a66597_read(r8a66597, DCPMAXP); + size = tmp & MAXP; + } + } else { + r8a66597_write(r8a66597, pipenum, PIPESEL); + tmp = r8a66597_read(r8a66597, PIPECFG); + if ((tmp & R8A66597_CNTMD) != 0) { + tmp = r8a66597_read(r8a66597, PIPEBUF); + size = ((tmp >> 10) + 1) * 64; + } else { + tmp = r8a66597_read(r8a66597, PIPEMAXP); + size = tmp & MXPS; + } + } + + return size; +} + +static inline unsigned short mbw_value(struct r8a66597 *r8a66597) +{ + if (r8a66597->pdata->on_chip) + return MBW_32; + else + return MBW_16; +} + +static void r8a66597_change_curpipe(struct r8a66597 *r8a66597, u16 pipenum, + u16 isel, u16 fifosel) +{ + u16 tmp, mask, loop; + int i = 0; + + if (!pipenum) { + mask = ISEL | CURPIPE; + loop = isel; + } else { + mask = CURPIPE; + loop = pipenum; + } + r8a66597_mdfy(r8a66597, loop, mask, fifosel); + + do { + tmp = r8a66597_read(r8a66597, fifosel); + if (i++ > 1000000) { + dev_err(r8a66597_to_dev(r8a66597), + "r8a66597: register%x, loop %x " + "is timeout\n", fifosel, loop); + break; + } + ndelay(1); + } while ((tmp & mask) != loop); +} + +static void pipe_change(struct r8a66597 *r8a66597, u16 pipenum) +{ + struct r8a66597_ep *ep = r8a66597->pipenum2ep[pipenum]; + + if (ep->use_dma) + r8a66597_bclr(r8a66597, DREQE, ep->fifosel); + + r8a66597_mdfy(r8a66597, pipenum, CURPIPE, ep->fifosel); + + ndelay(450); + + if (r8a66597_is_sudmac(r8a66597) && ep->use_dma) + r8a66597_bclr(r8a66597, mbw_value(r8a66597), ep->fifosel); + else + r8a66597_bset(r8a66597, mbw_value(r8a66597), ep->fifosel); + + if (ep->use_dma) + r8a66597_bset(r8a66597, DREQE, ep->fifosel); +} + +static int pipe_buffer_setting(struct r8a66597 *r8a66597, + struct r8a66597_pipe_info *info) +{ + u16 bufnum = 0, buf_bsize = 0; + u16 pipecfg = 0; + + if (info->pipe == 0) + return -EINVAL; + + r8a66597_write(r8a66597, info->pipe, PIPESEL); + + if (info->dir_in) + pipecfg |= R8A66597_DIR; + pipecfg |= info->type; + pipecfg |= info->epnum; + switch (info->type) { + case R8A66597_INT: + bufnum = 4 + (info->pipe - R8A66597_BASE_PIPENUM_INT); + buf_bsize = 0; + break; + case R8A66597_BULK: + /* isochronous pipes may be used as bulk pipes */ + if (info->pipe >= R8A66597_BASE_PIPENUM_BULK) + bufnum = info->pipe - R8A66597_BASE_PIPENUM_BULK; + else + bufnum = info->pipe - R8A66597_BASE_PIPENUM_ISOC; + + bufnum = R8A66597_BASE_BUFNUM + (bufnum * 16); + buf_bsize = 7; + pipecfg |= R8A66597_DBLB; + if (!info->dir_in) + pipecfg |= R8A66597_SHTNAK; + break; + case R8A66597_ISO: + bufnum = R8A66597_BASE_BUFNUM + + (info->pipe - R8A66597_BASE_PIPENUM_ISOC) * 16; + buf_bsize = 7; + break; + } + + if (buf_bsize && ((bufnum + 16) >= R8A66597_MAX_BUFNUM)) { + pr_err("r8a66597 pipe memory is insufficient\n"); + return -ENOMEM; + } + + r8a66597_write(r8a66597, pipecfg, PIPECFG); + r8a66597_write(r8a66597, (buf_bsize << 10) | (bufnum), PIPEBUF); + r8a66597_write(r8a66597, info->maxpacket, PIPEMAXP); + if (info->interval) + info->interval--; + r8a66597_write(r8a66597, info->interval, PIPEPERI); + + return 0; +} + +static void pipe_buffer_release(struct r8a66597 *r8a66597, + struct r8a66597_pipe_info *info) +{ + if (info->pipe == 0) + return; + + if (is_bulk_pipe(info->pipe)) { + r8a66597->bulk--; + } else if (is_interrupt_pipe(info->pipe)) { + r8a66597->interrupt--; + } else if (is_isoc_pipe(info->pipe)) { + r8a66597->isochronous--; + if (info->type == R8A66597_BULK) + r8a66597->bulk--; + } else { + dev_err(r8a66597_to_dev(r8a66597), + "ep_release: unexpect pipenum (%d)\n", info->pipe); + } +} + +static void pipe_initialize(struct r8a66597_ep *ep) +{ + struct r8a66597 *r8a66597 = ep->r8a66597; + + r8a66597_mdfy(r8a66597, 0, CURPIPE, ep->fifosel); + + r8a66597_write(r8a66597, ACLRM, ep->pipectr); + r8a66597_write(r8a66597, 0, ep->pipectr); + r8a66597_write(r8a66597, SQCLR, ep->pipectr); + if (ep->use_dma) { + r8a66597_mdfy(r8a66597, ep->pipenum, CURPIPE, ep->fifosel); + + ndelay(450); + + r8a66597_bset(r8a66597, mbw_value(r8a66597), ep->fifosel); + } +} + +static void r8a66597_ep_setting(struct r8a66597 *r8a66597, + struct r8a66597_ep *ep, + const struct usb_endpoint_descriptor *desc, + u16 pipenum, int dma) +{ + ep->use_dma = 0; + ep->fifoaddr = CFIFO; + ep->fifosel = CFIFOSEL; + ep->fifoctr = CFIFOCTR; + + ep->pipectr = get_pipectr_addr(pipenum); + if (is_bulk_pipe(pipenum) || is_isoc_pipe(pipenum)) { + ep->pipetre = get_pipetre_addr(pipenum); + ep->pipetrn = get_pipetrn_addr(pipenum); + } else { + ep->pipetre = 0; + ep->pipetrn = 0; + } + ep->pipenum = pipenum; + ep->ep.maxpacket = usb_endpoint_maxp(desc); + r8a66597->pipenum2ep[pipenum] = ep; + r8a66597->epaddr2ep[usb_endpoint_num(desc)] + = ep; + INIT_LIST_HEAD(&ep->queue); +} + +static void r8a66597_ep_release(struct r8a66597_ep *ep) +{ + struct r8a66597 *r8a66597 = ep->r8a66597; + u16 pipenum = ep->pipenum; + + if (pipenum == 0) + return; + + if (ep->use_dma) + r8a66597->num_dma--; + ep->pipenum = 0; + ep->busy = 0; + ep->use_dma = 0; +} + +static int alloc_pipe_config(struct r8a66597_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + struct r8a66597 *r8a66597 = ep->r8a66597; + struct r8a66597_pipe_info info; + int dma = 0; + unsigned char *counter; + int ret; + + ep->ep.desc = desc; + + if (ep->pipenum) /* already allocated pipe */ + return 0; + + switch (usb_endpoint_type(desc)) { + case USB_ENDPOINT_XFER_BULK: + if (r8a66597->bulk >= R8A66597_MAX_NUM_BULK) { + if (r8a66597->isochronous >= R8A66597_MAX_NUM_ISOC) { + dev_err(r8a66597_to_dev(r8a66597), + "bulk pipe is insufficient\n"); + return -ENODEV; + } else { + info.pipe = R8A66597_BASE_PIPENUM_ISOC + + r8a66597->isochronous; + counter = &r8a66597->isochronous; + } + } else { + info.pipe = R8A66597_BASE_PIPENUM_BULK + r8a66597->bulk; + counter = &r8a66597->bulk; + } + info.type = R8A66597_BULK; + dma = 1; + break; + case USB_ENDPOINT_XFER_INT: + if (r8a66597->interrupt >= R8A66597_MAX_NUM_INT) { + dev_err(r8a66597_to_dev(r8a66597), + "interrupt pipe is insufficient\n"); + return -ENODEV; + } + info.pipe = R8A66597_BASE_PIPENUM_INT + r8a66597->interrupt; + info.type = R8A66597_INT; + counter = &r8a66597->interrupt; + break; + case USB_ENDPOINT_XFER_ISOC: + if (r8a66597->isochronous >= R8A66597_MAX_NUM_ISOC) { + dev_err(r8a66597_to_dev(r8a66597), + "isochronous pipe is insufficient\n"); + return -ENODEV; + } + info.pipe = R8A66597_BASE_PIPENUM_ISOC + r8a66597->isochronous; + info.type = R8A66597_ISO; + counter = &r8a66597->isochronous; + break; + default: + dev_err(r8a66597_to_dev(r8a66597), "unexpect xfer type\n"); + return -EINVAL; + } + ep->type = info.type; + + info.epnum = usb_endpoint_num(desc); + info.maxpacket = usb_endpoint_maxp(desc); + info.interval = desc->bInterval; + if (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) + info.dir_in = 1; + else + info.dir_in = 0; + + ret = pipe_buffer_setting(r8a66597, &info); + if (ret < 0) { + dev_err(r8a66597_to_dev(r8a66597), + "pipe_buffer_setting fail\n"); + return ret; + } + + (*counter)++; + if ((counter == &r8a66597->isochronous) && info.type == R8A66597_BULK) + r8a66597->bulk++; + + r8a66597_ep_setting(r8a66597, ep, desc, info.pipe, dma); + pipe_initialize(ep); + + return 0; +} + +static int free_pipe_config(struct r8a66597_ep *ep) +{ + struct r8a66597 *r8a66597 = ep->r8a66597; + struct r8a66597_pipe_info info; + + info.pipe = ep->pipenum; + info.type = ep->type; + pipe_buffer_release(r8a66597, &info); + r8a66597_ep_release(ep); + + return 0; +} + +/*-------------------------------------------------------------------------*/ +static void pipe_irq_enable(struct r8a66597 *r8a66597, u16 pipenum) +{ + enable_irq_ready(r8a66597, pipenum); + enable_irq_nrdy(r8a66597, pipenum); +} + +static void pipe_irq_disable(struct r8a66597 *r8a66597, u16 pipenum) +{ + disable_irq_ready(r8a66597, pipenum); + disable_irq_nrdy(r8a66597, pipenum); +} + +/* if complete is true, gadget driver complete function is not call */ +static void control_end(struct r8a66597 *r8a66597, unsigned ccpl) +{ + r8a66597->ep[0].internal_ccpl = ccpl; + pipe_start(r8a66597, 0); + r8a66597_bset(r8a66597, CCPL, DCPCTR); +} + +static void start_ep0_write(struct r8a66597_ep *ep, + struct r8a66597_request *req) +{ + struct r8a66597 *r8a66597 = ep->r8a66597; + + pipe_change(r8a66597, ep->pipenum); + r8a66597_mdfy(r8a66597, ISEL, (ISEL | CURPIPE), CFIFOSEL); + r8a66597_write(r8a66597, BCLR, ep->fifoctr); + if (req->req.length == 0) { + r8a66597_bset(r8a66597, BVAL, ep->fifoctr); + pipe_start(r8a66597, 0); + transfer_complete(ep, req, 0); + } else { + r8a66597_write(r8a66597, ~BEMP0, BEMPSTS); + irq_ep0_write(ep, req); + } +} + +static void disable_fifosel(struct r8a66597 *r8a66597, u16 pipenum, + u16 fifosel) +{ + u16 tmp; + + tmp = r8a66597_read(r8a66597, fifosel) & CURPIPE; + if (tmp == pipenum) + r8a66597_change_curpipe(r8a66597, 0, 0, fifosel); +} + +static void change_bfre_mode(struct r8a66597 *r8a66597, u16 pipenum, + int enable) +{ + struct r8a66597_ep *ep = r8a66597->pipenum2ep[pipenum]; + u16 tmp, toggle; + + /* check current BFRE bit */ + r8a66597_write(r8a66597, pipenum, PIPESEL); + tmp = r8a66597_read(r8a66597, PIPECFG) & R8A66597_BFRE; + if ((enable && tmp) || (!enable && !tmp)) + return; + + /* change BFRE bit */ + pipe_stop(r8a66597, pipenum); + disable_fifosel(r8a66597, pipenum, CFIFOSEL); + disable_fifosel(r8a66597, pipenum, D0FIFOSEL); + disable_fifosel(r8a66597, pipenum, D1FIFOSEL); + + toggle = save_usb_toggle(r8a66597, pipenum); + + r8a66597_write(r8a66597, pipenum, PIPESEL); + if (enable) + r8a66597_bset(r8a66597, R8A66597_BFRE, PIPECFG); + else + r8a66597_bclr(r8a66597, R8A66597_BFRE, PIPECFG); + + /* initialize for internal BFRE flag */ + r8a66597_bset(r8a66597, ACLRM, ep->pipectr); + r8a66597_bclr(r8a66597, ACLRM, ep->pipectr); + + restore_usb_toggle(r8a66597, pipenum, toggle); +} + +static int sudmac_alloc_channel(struct r8a66597 *r8a66597, + struct r8a66597_ep *ep, + struct r8a66597_request *req) +{ + struct r8a66597_dma *dma; + + if (!r8a66597_is_sudmac(r8a66597)) + return -ENODEV; + + /* Check transfer type */ + if (!is_bulk_pipe(ep->pipenum)) + return -EIO; + + if (r8a66597->dma.used) + return -EBUSY; + + /* set SUDMAC parameters */ + dma = &r8a66597->dma; + dma->used = 1; + if (ep->ep.desc->bEndpointAddress & USB_DIR_IN) { + dma->dir = 1; + } else { + dma->dir = 0; + change_bfre_mode(r8a66597, ep->pipenum, 1); + } + + /* set r8a66597_ep paramters */ + ep->use_dma = 1; + ep->dma = dma; + ep->fifoaddr = D0FIFO; + ep->fifosel = D0FIFOSEL; + ep->fifoctr = D0FIFOCTR; + + /* dma mapping */ + return usb_gadget_map_request(&r8a66597->gadget, &req->req, dma->dir); +} + +static void sudmac_free_channel(struct r8a66597 *r8a66597, + struct r8a66597_ep *ep, + struct r8a66597_request *req) +{ + if (!r8a66597_is_sudmac(r8a66597)) + return; + + usb_gadget_unmap_request(&r8a66597->gadget, &req->req, ep->dma->dir); + + r8a66597_bclr(r8a66597, DREQE, ep->fifosel); + r8a66597_change_curpipe(r8a66597, 0, 0, ep->fifosel); + + ep->dma->used = 0; + ep->use_dma = 0; + ep->fifoaddr = CFIFO; + ep->fifosel = CFIFOSEL; + ep->fifoctr = CFIFOCTR; +} + +static void sudmac_start(struct r8a66597 *r8a66597, struct r8a66597_ep *ep, + struct r8a66597_request *req) +{ + BUG_ON(req->req.length == 0); + + r8a66597_sudmac_write(r8a66597, LBA_WAIT, CH0CFG); + r8a66597_sudmac_write(r8a66597, req->req.dma, CH0BA); + r8a66597_sudmac_write(r8a66597, req->req.length, CH0BBC); + r8a66597_sudmac_write(r8a66597, CH0ENDE, DINTCTRL); + + r8a66597_sudmac_write(r8a66597, DEN, CH0DEN); +} + +static void start_packet_write(struct r8a66597_ep *ep, + struct r8a66597_request *req) +{ + struct r8a66597 *r8a66597 = ep->r8a66597; + u16 tmp; + + pipe_change(r8a66597, ep->pipenum); + disable_irq_empty(r8a66597, ep->pipenum); + pipe_start(r8a66597, ep->pipenum); + + if (req->req.length == 0) { + transfer_complete(ep, req, 0); + } else { + r8a66597_write(r8a66597, ~(1 << ep->pipenum), BRDYSTS); + if (sudmac_alloc_channel(r8a66597, ep, req) < 0) { + /* PIO mode */ + pipe_change(r8a66597, ep->pipenum); + disable_irq_empty(r8a66597, ep->pipenum); + pipe_start(r8a66597, ep->pipenum); + tmp = r8a66597_read(r8a66597, ep->fifoctr); + if (unlikely((tmp & FRDY) == 0)) + pipe_irq_enable(r8a66597, ep->pipenum); + else + irq_packet_write(ep, req); + } else { + /* DMA mode */ + pipe_change(r8a66597, ep->pipenum); + disable_irq_nrdy(r8a66597, ep->pipenum); + pipe_start(r8a66597, ep->pipenum); + enable_irq_nrdy(r8a66597, ep->pipenum); + sudmac_start(r8a66597, ep, req); + } + } +} + +static void start_packet_read(struct r8a66597_ep *ep, + struct r8a66597_request *req) +{ + struct r8a66597 *r8a66597 = ep->r8a66597; + u16 pipenum = ep->pipenum; + + if (ep->pipenum == 0) { + r8a66597_mdfy(r8a66597, 0, (ISEL | CURPIPE), CFIFOSEL); + r8a66597_write(r8a66597, BCLR, ep->fifoctr); + pipe_start(r8a66597, pipenum); + pipe_irq_enable(r8a66597, pipenum); + } else { + pipe_stop(r8a66597, pipenum); + if (ep->pipetre) { + enable_irq_nrdy(r8a66597, pipenum); + r8a66597_write(r8a66597, TRCLR, ep->pipetre); + r8a66597_write(r8a66597, + DIV_ROUND_UP(req->req.length, ep->ep.maxpacket), + ep->pipetrn); + r8a66597_bset(r8a66597, TRENB, ep->pipetre); + } + + if (sudmac_alloc_channel(r8a66597, ep, req) < 0) { + /* PIO mode */ + change_bfre_mode(r8a66597, ep->pipenum, 0); + pipe_start(r8a66597, pipenum); /* trigger once */ + pipe_irq_enable(r8a66597, pipenum); + } else { + pipe_change(r8a66597, pipenum); + sudmac_start(r8a66597, ep, req); + pipe_start(r8a66597, pipenum); /* trigger once */ + } + } +} + +static void start_packet(struct r8a66597_ep *ep, struct r8a66597_request *req) +{ + if (ep->ep.desc->bEndpointAddress & USB_DIR_IN) + start_packet_write(ep, req); + else + start_packet_read(ep, req); +} + +static void start_ep0(struct r8a66597_ep *ep, struct r8a66597_request *req) +{ + u16 ctsq; + + ctsq = r8a66597_read(ep->r8a66597, INTSTS0) & CTSQ; + + switch (ctsq) { + case CS_RDDS: + start_ep0_write(ep, req); + break; + case CS_WRDS: + start_packet_read(ep, req); + break; + + case CS_WRND: + control_end(ep->r8a66597, 0); + break; + default: + dev_err(r8a66597_to_dev(ep->r8a66597), + "start_ep0: unexpect ctsq(%x)\n", ctsq); + break; + } +} + +static void init_controller(struct r8a66597 *r8a66597) +{ + u16 vif = r8a66597->pdata->vif ? LDRV : 0; + u16 irq_sense = r8a66597->irq_sense_low ? INTL : 0; + u16 endian = r8a66597->pdata->endian ? BIGEND : 0; + + if (r8a66597->pdata->on_chip) { + if (r8a66597->pdata->buswait) + r8a66597_write(r8a66597, r8a66597->pdata->buswait, + SYSCFG1); + else + r8a66597_write(r8a66597, 0x0f, SYSCFG1); + r8a66597_bset(r8a66597, HSE, SYSCFG0); + + r8a66597_bclr(r8a66597, USBE, SYSCFG0); + r8a66597_bclr(r8a66597, DPRPU, SYSCFG0); + r8a66597_bset(r8a66597, USBE, SYSCFG0); + + r8a66597_bset(r8a66597, SCKE, SYSCFG0); + + r8a66597_bset(r8a66597, irq_sense, INTENB1); + r8a66597_write(r8a66597, BURST | CPU_ADR_RD_WR, + DMA0CFG); + } else { + r8a66597_bset(r8a66597, vif | endian, PINCFG); + r8a66597_bset(r8a66597, HSE, SYSCFG0); /* High spd */ + r8a66597_mdfy(r8a66597, get_xtal_from_pdata(r8a66597->pdata), + XTAL, SYSCFG0); + + r8a66597_bclr(r8a66597, USBE, SYSCFG0); + r8a66597_bclr(r8a66597, DPRPU, SYSCFG0); + r8a66597_bset(r8a66597, USBE, SYSCFG0); + + r8a66597_bset(r8a66597, XCKE, SYSCFG0); + + mdelay(3); + + r8a66597_bset(r8a66597, PLLC, SYSCFG0); + + mdelay(1); + + r8a66597_bset(r8a66597, SCKE, SYSCFG0); + + r8a66597_bset(r8a66597, irq_sense, INTENB1); + r8a66597_write(r8a66597, BURST | CPU_ADR_RD_WR, + DMA0CFG); + } +} + +static void disable_controller(struct r8a66597 *r8a66597) +{ + if (r8a66597->pdata->on_chip) { + r8a66597_bset(r8a66597, SCKE, SYSCFG0); + r8a66597_bclr(r8a66597, UTST, TESTMODE); + + /* disable interrupts */ + r8a66597_write(r8a66597, 0, INTENB0); + r8a66597_write(r8a66597, 0, INTENB1); + r8a66597_write(r8a66597, 0, BRDYENB); + r8a66597_write(r8a66597, 0, BEMPENB); + r8a66597_write(r8a66597, 0, NRDYENB); + + /* clear status */ + r8a66597_write(r8a66597, 0, BRDYSTS); + r8a66597_write(r8a66597, 0, NRDYSTS); + r8a66597_write(r8a66597, 0, BEMPSTS); + + r8a66597_bclr(r8a66597, USBE, SYSCFG0); + r8a66597_bclr(r8a66597, SCKE, SYSCFG0); + + } else { + r8a66597_bclr(r8a66597, UTST, TESTMODE); + r8a66597_bclr(r8a66597, SCKE, SYSCFG0); + udelay(1); + r8a66597_bclr(r8a66597, PLLC, SYSCFG0); + udelay(1); + udelay(1); + r8a66597_bclr(r8a66597, XCKE, SYSCFG0); + } +} + +static void r8a66597_start_xclock(struct r8a66597 *r8a66597) +{ + u16 tmp; + + if (!r8a66597->pdata->on_chip) { + tmp = r8a66597_read(r8a66597, SYSCFG0); + if (!(tmp & XCKE)) + r8a66597_bset(r8a66597, XCKE, SYSCFG0); + } +} + +static struct r8a66597_request *get_request_from_ep(struct r8a66597_ep *ep) +{ + return list_entry(ep->queue.next, struct r8a66597_request, queue); +} + +/*-------------------------------------------------------------------------*/ +static void transfer_complete(struct r8a66597_ep *ep, + struct r8a66597_request *req, int status) +__releases(r8a66597->lock) +__acquires(r8a66597->lock) +{ + int restart = 0; + + if (unlikely(ep->pipenum == 0)) { + if (ep->internal_ccpl) { + ep->internal_ccpl = 0; + return; + } + } + + list_del_init(&req->queue); + if (ep->r8a66597->gadget.speed == USB_SPEED_UNKNOWN) + req->req.status = -ESHUTDOWN; + else + req->req.status = status; + + if (!list_empty(&ep->queue)) + restart = 1; + + if (ep->use_dma) + sudmac_free_channel(ep->r8a66597, ep, req); + + spin_unlock(&ep->r8a66597->lock); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&ep->r8a66597->lock); + + if (restart) { + req = get_request_from_ep(ep); + if (ep->ep.desc) + start_packet(ep, req); + } +} + +static void irq_ep0_write(struct r8a66597_ep *ep, struct r8a66597_request *req) +{ + int i; + u16 tmp; + unsigned bufsize; + size_t size; + void *buf; + u16 pipenum = ep->pipenum; + struct r8a66597 *r8a66597 = ep->r8a66597; + + pipe_change(r8a66597, pipenum); + r8a66597_bset(r8a66597, ISEL, ep->fifosel); + + i = 0; + do { + tmp = r8a66597_read(r8a66597, ep->fifoctr); + if (i++ > 100000) { + dev_err(r8a66597_to_dev(r8a66597), + "pipe0 is busy. maybe cpu i/o bus " + "conflict. please power off this controller."); + return; + } + ndelay(1); + } while ((tmp & FRDY) == 0); + + /* prepare parameters */ + bufsize = get_buffer_size(r8a66597, pipenum); + buf = req->req.buf + req->req.actual; + size = min(bufsize, req->req.length - req->req.actual); + + /* write fifo */ + if (req->req.buf) { + if (size > 0) + r8a66597_write_fifo(r8a66597, ep, buf, size); + if ((size == 0) || ((size % ep->ep.maxpacket) != 0)) + r8a66597_bset(r8a66597, BVAL, ep->fifoctr); + } + + /* update parameters */ + req->req.actual += size; + + /* check transfer finish */ + if ((!req->req.zero && (req->req.actual == req->req.length)) + || (size % ep->ep.maxpacket) + || (size == 0)) { + disable_irq_ready(r8a66597, pipenum); + disable_irq_empty(r8a66597, pipenum); + } else { + disable_irq_ready(r8a66597, pipenum); + enable_irq_empty(r8a66597, pipenum); + } + pipe_start(r8a66597, pipenum); +} + +static void irq_packet_write(struct r8a66597_ep *ep, + struct r8a66597_request *req) +{ + u16 tmp; + unsigned bufsize; + size_t size; + void *buf; + u16 pipenum = ep->pipenum; + struct r8a66597 *r8a66597 = ep->r8a66597; + + pipe_change(r8a66597, pipenum); + tmp = r8a66597_read(r8a66597, ep->fifoctr); + if (unlikely((tmp & FRDY) == 0)) { + pipe_stop(r8a66597, pipenum); + pipe_irq_disable(r8a66597, pipenum); + dev_err(r8a66597_to_dev(r8a66597), + "write fifo not ready. pipnum=%d\n", pipenum); + return; + } + + /* prepare parameters */ + bufsize = get_buffer_size(r8a66597, pipenum); + buf = req->req.buf + req->req.actual; + size = min(bufsize, req->req.length - req->req.actual); + + /* write fifo */ + if (req->req.buf) { + r8a66597_write_fifo(r8a66597, ep, buf, size); + if ((size == 0) + || ((size % ep->ep.maxpacket) != 0) + || ((bufsize != ep->ep.maxpacket) + && (bufsize > size))) + r8a66597_bset(r8a66597, BVAL, ep->fifoctr); + } + + /* update parameters */ + req->req.actual += size; + /* check transfer finish */ + if ((!req->req.zero && (req->req.actual == req->req.length)) + || (size % ep->ep.maxpacket) + || (size == 0)) { + disable_irq_ready(r8a66597, pipenum); + enable_irq_empty(r8a66597, pipenum); + } else { + disable_irq_empty(r8a66597, pipenum); + pipe_irq_enable(r8a66597, pipenum); + } +} + +static void irq_packet_read(struct r8a66597_ep *ep, + struct r8a66597_request *req) +{ + u16 tmp; + int rcv_len, bufsize, req_len; + int size; + void *buf; + u16 pipenum = ep->pipenum; + struct r8a66597 *r8a66597 = ep->r8a66597; + int finish = 0; + + pipe_change(r8a66597, pipenum); + tmp = r8a66597_read(r8a66597, ep->fifoctr); + if (unlikely((tmp & FRDY) == 0)) { + req->req.status = -EPIPE; + pipe_stop(r8a66597, pipenum); + pipe_irq_disable(r8a66597, pipenum); + dev_err(r8a66597_to_dev(r8a66597), "read fifo not ready"); + return; + } + + /* prepare parameters */ + rcv_len = tmp & DTLN; + bufsize = get_buffer_size(r8a66597, pipenum); + + buf = req->req.buf + req->req.actual; + req_len = req->req.length - req->req.actual; + if (rcv_len < bufsize) + size = min(rcv_len, req_len); + else + size = min(bufsize, req_len); + + /* update parameters */ + req->req.actual += size; + + /* check transfer finish */ + if ((!req->req.zero && (req->req.actual == req->req.length)) + || (size % ep->ep.maxpacket) + || (size == 0)) { + pipe_stop(r8a66597, pipenum); + pipe_irq_disable(r8a66597, pipenum); + finish = 1; + } + + /* read fifo */ + if (req->req.buf) { + if (size == 0) + r8a66597_write(r8a66597, BCLR, ep->fifoctr); + else + r8a66597_read_fifo(r8a66597, ep->fifoaddr, buf, size); + + } + + if ((ep->pipenum != 0) && finish) + transfer_complete(ep, req, 0); +} + +static void irq_pipe_ready(struct r8a66597 *r8a66597, u16 status, u16 enb) +{ + u16 check; + u16 pipenum; + struct r8a66597_ep *ep; + struct r8a66597_request *req; + + if ((status & BRDY0) && (enb & BRDY0)) { + r8a66597_write(r8a66597, ~BRDY0, BRDYSTS); + r8a66597_mdfy(r8a66597, 0, CURPIPE, CFIFOSEL); + + ep = &r8a66597->ep[0]; + req = get_request_from_ep(ep); + irq_packet_read(ep, req); + } else { + for (pipenum = 1; pipenum < R8A66597_MAX_NUM_PIPE; pipenum++) { + check = 1 << pipenum; + if ((status & check) && (enb & check)) { + r8a66597_write(r8a66597, ~check, BRDYSTS); + ep = r8a66597->pipenum2ep[pipenum]; + req = get_request_from_ep(ep); + if (ep->ep.desc->bEndpointAddress & USB_DIR_IN) + irq_packet_write(ep, req); + else + irq_packet_read(ep, req); + } + } + } +} + +static void irq_pipe_empty(struct r8a66597 *r8a66597, u16 status, u16 enb) +{ + u16 tmp; + u16 check; + u16 pipenum; + struct r8a66597_ep *ep; + struct r8a66597_request *req; + + if ((status & BEMP0) && (enb & BEMP0)) { + r8a66597_write(r8a66597, ~BEMP0, BEMPSTS); + + ep = &r8a66597->ep[0]; + req = get_request_from_ep(ep); + irq_ep0_write(ep, req); + } else { + for (pipenum = 1; pipenum < R8A66597_MAX_NUM_PIPE; pipenum++) { + check = 1 << pipenum; + if ((status & check) && (enb & check)) { + r8a66597_write(r8a66597, ~check, BEMPSTS); + tmp = control_reg_get(r8a66597, pipenum); + if ((tmp & INBUFM) == 0) { + disable_irq_empty(r8a66597, pipenum); + pipe_irq_disable(r8a66597, pipenum); + pipe_stop(r8a66597, pipenum); + ep = r8a66597->pipenum2ep[pipenum]; + req = get_request_from_ep(ep); + if (!list_empty(&ep->queue)) + transfer_complete(ep, req, 0); + } + } + } + } +} + +static void get_status(struct r8a66597 *r8a66597, struct usb_ctrlrequest *ctrl) +__releases(r8a66597->lock) +__acquires(r8a66597->lock) +{ + struct r8a66597_ep *ep; + u16 pid; + u16 status = 0; + u16 w_index = le16_to_cpu(ctrl->wIndex); + + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + status = r8a66597->device_status; + break; + case USB_RECIP_INTERFACE: + status = 0; + break; + case USB_RECIP_ENDPOINT: + ep = r8a66597->epaddr2ep[w_index & USB_ENDPOINT_NUMBER_MASK]; + pid = control_reg_get_pid(r8a66597, ep->pipenum); + if (pid == PID_STALL) + status = 1 << USB_ENDPOINT_HALT; + else + status = 0; + break; + default: + pipe_stall(r8a66597, 0); + return; /* exit */ + } + + r8a66597->ep0_data = cpu_to_le16(status); + r8a66597->ep0_req->buf = &r8a66597->ep0_data; + r8a66597->ep0_req->length = 2; + /* AV: what happens if we get called again before that gets through? */ + spin_unlock(&r8a66597->lock); + r8a66597_queue(r8a66597->gadget.ep0, r8a66597->ep0_req, GFP_ATOMIC); + spin_lock(&r8a66597->lock); +} + +static void clear_feature(struct r8a66597 *r8a66597, + struct usb_ctrlrequest *ctrl) +{ + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + control_end(r8a66597, 1); + break; + case USB_RECIP_INTERFACE: + control_end(r8a66597, 1); + break; + case USB_RECIP_ENDPOINT: { + struct r8a66597_ep *ep; + struct r8a66597_request *req; + u16 w_index = le16_to_cpu(ctrl->wIndex); + + ep = r8a66597->epaddr2ep[w_index & USB_ENDPOINT_NUMBER_MASK]; + if (!ep->wedge) { + pipe_stop(r8a66597, ep->pipenum); + control_reg_sqclr(r8a66597, ep->pipenum); + spin_unlock(&r8a66597->lock); + usb_ep_clear_halt(&ep->ep); + spin_lock(&r8a66597->lock); + } + + control_end(r8a66597, 1); + + req = get_request_from_ep(ep); + if (ep->busy) { + ep->busy = 0; + if (list_empty(&ep->queue)) + break; + start_packet(ep, req); + } else if (!list_empty(&ep->queue)) + pipe_start(r8a66597, ep->pipenum); + } + break; + default: + pipe_stall(r8a66597, 0); + break; + } +} + +static void set_feature(struct r8a66597 *r8a66597, struct usb_ctrlrequest *ctrl) +{ + u16 tmp; + int timeout = 3000; + + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + switch (le16_to_cpu(ctrl->wValue)) { + case USB_DEVICE_TEST_MODE: + control_end(r8a66597, 1); + /* Wait for the completion of status stage */ + do { + tmp = r8a66597_read(r8a66597, INTSTS0) & CTSQ; + udelay(1); + } while (tmp != CS_IDST && timeout-- > 0); + + if (tmp == CS_IDST) + r8a66597_bset(r8a66597, + le16_to_cpu(ctrl->wIndex >> 8), + TESTMODE); + break; + default: + pipe_stall(r8a66597, 0); + break; + } + break; + case USB_RECIP_INTERFACE: + control_end(r8a66597, 1); + break; + case USB_RECIP_ENDPOINT: { + struct r8a66597_ep *ep; + u16 w_index = le16_to_cpu(ctrl->wIndex); + + ep = r8a66597->epaddr2ep[w_index & USB_ENDPOINT_NUMBER_MASK]; + pipe_stall(r8a66597, ep->pipenum); + + control_end(r8a66597, 1); + } + break; + default: + pipe_stall(r8a66597, 0); + break; + } +} + +/* if return value is true, call class driver's setup() */ +static int setup_packet(struct r8a66597 *r8a66597, struct usb_ctrlrequest *ctrl) +{ + u16 *p = (u16 *)ctrl; + unsigned long offset = USBREQ; + int i, ret = 0; + + /* read fifo */ + r8a66597_write(r8a66597, ~VALID, INTSTS0); + + for (i = 0; i < 4; i++) + p[i] = r8a66597_read(r8a66597, offset + i*2); + + /* check request */ + if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { + switch (ctrl->bRequest) { + case USB_REQ_GET_STATUS: + get_status(r8a66597, ctrl); + break; + case USB_REQ_CLEAR_FEATURE: + clear_feature(r8a66597, ctrl); + break; + case USB_REQ_SET_FEATURE: + set_feature(r8a66597, ctrl); + break; + default: + ret = 1; + break; + } + } else + ret = 1; + return ret; +} + +static void r8a66597_update_usb_speed(struct r8a66597 *r8a66597) +{ + u16 speed = get_usb_speed(r8a66597); + + switch (speed) { + case HSMODE: + r8a66597->gadget.speed = USB_SPEED_HIGH; + break; + case FSMODE: + r8a66597->gadget.speed = USB_SPEED_FULL; + break; + default: + r8a66597->gadget.speed = USB_SPEED_UNKNOWN; + dev_err(r8a66597_to_dev(r8a66597), "USB speed unknown\n"); + } +} + +static void irq_device_state(struct r8a66597 *r8a66597) +{ + u16 dvsq; + + dvsq = r8a66597_read(r8a66597, INTSTS0) & DVSQ; + r8a66597_write(r8a66597, ~DVST, INTSTS0); + + if (dvsq == DS_DFLT) { + /* bus reset */ + spin_unlock(&r8a66597->lock); + usb_gadget_udc_reset(&r8a66597->gadget, r8a66597->driver); + spin_lock(&r8a66597->lock); + r8a66597_update_usb_speed(r8a66597); + } + if (r8a66597->old_dvsq == DS_CNFG && dvsq != DS_CNFG) + r8a66597_update_usb_speed(r8a66597); + if ((dvsq == DS_CNFG || dvsq == DS_ADDS) + && r8a66597->gadget.speed == USB_SPEED_UNKNOWN) + r8a66597_update_usb_speed(r8a66597); + + r8a66597->old_dvsq = dvsq; +} + +static void irq_control_stage(struct r8a66597 *r8a66597) +__releases(r8a66597->lock) +__acquires(r8a66597->lock) +{ + struct usb_ctrlrequest ctrl; + u16 ctsq; + + ctsq = r8a66597_read(r8a66597, INTSTS0) & CTSQ; + r8a66597_write(r8a66597, ~CTRT, INTSTS0); + + switch (ctsq) { + case CS_IDST: { + struct r8a66597_ep *ep; + struct r8a66597_request *req; + ep = &r8a66597->ep[0]; + req = get_request_from_ep(ep); + transfer_complete(ep, req, 0); + } + break; + + case CS_RDDS: + case CS_WRDS: + case CS_WRND: + if (setup_packet(r8a66597, &ctrl)) { + spin_unlock(&r8a66597->lock); + if (r8a66597->driver->setup(&r8a66597->gadget, &ctrl) + < 0) + pipe_stall(r8a66597, 0); + spin_lock(&r8a66597->lock); + } + break; + case CS_RDSS: + case CS_WRSS: + control_end(r8a66597, 0); + break; + default: + dev_err(r8a66597_to_dev(r8a66597), + "ctrl_stage: unexpect ctsq(%x)\n", ctsq); + break; + } +} + +static void sudmac_finish(struct r8a66597 *r8a66597, struct r8a66597_ep *ep) +{ + u16 pipenum; + struct r8a66597_request *req; + u32 len; + int i = 0; + + pipenum = ep->pipenum; + pipe_change(r8a66597, pipenum); + + while (!(r8a66597_read(r8a66597, ep->fifoctr) & FRDY)) { + udelay(1); + if (unlikely(i++ >= 10000)) { /* timeout = 10 msec */ + dev_err(r8a66597_to_dev(r8a66597), + "%s: FRDY was not set (%d)\n", + __func__, pipenum); + return; + } + } + + r8a66597_bset(r8a66597, BCLR, ep->fifoctr); + req = get_request_from_ep(ep); + + /* prepare parameters */ + len = r8a66597_sudmac_read(r8a66597, CH0CBC); + req->req.actual += len; + + /* clear */ + r8a66597_sudmac_write(r8a66597, CH0STCLR, DSTSCLR); + + /* check transfer finish */ + if ((!req->req.zero && (req->req.actual == req->req.length)) + || (len % ep->ep.maxpacket)) { + if (ep->dma->dir) { + disable_irq_ready(r8a66597, pipenum); + enable_irq_empty(r8a66597, pipenum); + } else { + /* Clear the interrupt flag for next transfer */ + r8a66597_write(r8a66597, ~(1 << pipenum), BRDYSTS); + transfer_complete(ep, req, 0); + } + } +} + +static void r8a66597_sudmac_irq(struct r8a66597 *r8a66597) +{ + u32 irqsts; + struct r8a66597_ep *ep; + u16 pipenum; + + irqsts = r8a66597_sudmac_read(r8a66597, DINTSTS); + if (irqsts & CH0ENDS) { + r8a66597_sudmac_write(r8a66597, CH0ENDC, DINTSTSCLR); + pipenum = (r8a66597_read(r8a66597, D0FIFOSEL) & CURPIPE); + ep = r8a66597->pipenum2ep[pipenum]; + sudmac_finish(r8a66597, ep); + } +} + +static irqreturn_t r8a66597_irq(int irq, void *_r8a66597) +{ + struct r8a66597 *r8a66597 = _r8a66597; + u16 intsts0; + u16 intenb0; + u16 savepipe; + u16 mask0; + + spin_lock(&r8a66597->lock); + + if (r8a66597_is_sudmac(r8a66597)) + r8a66597_sudmac_irq(r8a66597); + + intsts0 = r8a66597_read(r8a66597, INTSTS0); + intenb0 = r8a66597_read(r8a66597, INTENB0); + + savepipe = r8a66597_read(r8a66597, CFIFOSEL); + + mask0 = intsts0 & intenb0; + if (mask0) { + u16 brdysts = r8a66597_read(r8a66597, BRDYSTS); + u16 bempsts = r8a66597_read(r8a66597, BEMPSTS); + u16 brdyenb = r8a66597_read(r8a66597, BRDYENB); + u16 bempenb = r8a66597_read(r8a66597, BEMPENB); + + if (mask0 & VBINT) { + r8a66597_write(r8a66597, 0xffff & ~VBINT, + INTSTS0); + r8a66597_start_xclock(r8a66597); + + /* start vbus sampling */ + r8a66597->old_vbus = r8a66597_read(r8a66597, INTSTS0) + & VBSTS; + r8a66597->scount = R8A66597_MAX_SAMPLING; + + mod_timer(&r8a66597->timer, + jiffies + msecs_to_jiffies(50)); + } + if (intsts0 & DVSQ) + irq_device_state(r8a66597); + + if ((intsts0 & BRDY) && (intenb0 & BRDYE) + && (brdysts & brdyenb)) + irq_pipe_ready(r8a66597, brdysts, brdyenb); + if ((intsts0 & BEMP) && (intenb0 & BEMPE) + && (bempsts & bempenb)) + irq_pipe_empty(r8a66597, bempsts, bempenb); + + if (intsts0 & CTRT) + irq_control_stage(r8a66597); + } + + r8a66597_write(r8a66597, savepipe, CFIFOSEL); + + spin_unlock(&r8a66597->lock); + return IRQ_HANDLED; +} + +static void r8a66597_timer(struct timer_list *t) +{ + struct r8a66597 *r8a66597 = from_timer(r8a66597, t, timer); + unsigned long flags; + u16 tmp; + + spin_lock_irqsave(&r8a66597->lock, flags); + tmp = r8a66597_read(r8a66597, SYSCFG0); + if (r8a66597->scount > 0) { + tmp = r8a66597_read(r8a66597, INTSTS0) & VBSTS; + if (tmp == r8a66597->old_vbus) { + r8a66597->scount--; + if (r8a66597->scount == 0) { + if (tmp == VBSTS) + r8a66597_usb_connect(r8a66597); + else + r8a66597_usb_disconnect(r8a66597); + } else { + mod_timer(&r8a66597->timer, + jiffies + msecs_to_jiffies(50)); + } + } else { + r8a66597->scount = R8A66597_MAX_SAMPLING; + r8a66597->old_vbus = tmp; + mod_timer(&r8a66597->timer, + jiffies + msecs_to_jiffies(50)); + } + } + spin_unlock_irqrestore(&r8a66597->lock, flags); +} + +/*-------------------------------------------------------------------------*/ +static int r8a66597_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct r8a66597_ep *ep; + + ep = container_of(_ep, struct r8a66597_ep, ep); + return alloc_pipe_config(ep, desc); +} + +static int r8a66597_disable(struct usb_ep *_ep) +{ + struct r8a66597_ep *ep; + struct r8a66597_request *req; + unsigned long flags; + + ep = container_of(_ep, struct r8a66597_ep, ep); + BUG_ON(!ep); + + while (!list_empty(&ep->queue)) { + req = get_request_from_ep(ep); + spin_lock_irqsave(&ep->r8a66597->lock, flags); + transfer_complete(ep, req, -ECONNRESET); + spin_unlock_irqrestore(&ep->r8a66597->lock, flags); + } + + pipe_irq_disable(ep->r8a66597, ep->pipenum); + return free_pipe_config(ep); +} + +static struct usb_request *r8a66597_alloc_request(struct usb_ep *_ep, + gfp_t gfp_flags) +{ + struct r8a66597_request *req; + + req = kzalloc(sizeof(struct r8a66597_request), gfp_flags); + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->queue); + + return &req->req; +} + +static void r8a66597_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct r8a66597_request *req; + + req = container_of(_req, struct r8a66597_request, req); + kfree(req); +} + +static int r8a66597_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t gfp_flags) +{ + struct r8a66597_ep *ep; + struct r8a66597_request *req; + unsigned long flags; + int request = 0; + + ep = container_of(_ep, struct r8a66597_ep, ep); + req = container_of(_req, struct r8a66597_request, req); + + if (ep->r8a66597->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + spin_lock_irqsave(&ep->r8a66597->lock, flags); + + if (list_empty(&ep->queue)) + request = 1; + + list_add_tail(&req->queue, &ep->queue); + req->req.actual = 0; + req->req.status = -EINPROGRESS; + + if (ep->ep.desc == NULL) /* control */ + start_ep0(ep, req); + else { + if (request && !ep->busy) + start_packet(ep, req); + } + + spin_unlock_irqrestore(&ep->r8a66597->lock, flags); + + return 0; +} + +static int r8a66597_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct r8a66597_ep *ep; + struct r8a66597_request *req; + unsigned long flags; + + ep = container_of(_ep, struct r8a66597_ep, ep); + req = container_of(_req, struct r8a66597_request, req); + + spin_lock_irqsave(&ep->r8a66597->lock, flags); + if (!list_empty(&ep->queue)) + transfer_complete(ep, req, -ECONNRESET); + spin_unlock_irqrestore(&ep->r8a66597->lock, flags); + + return 0; +} + +static int r8a66597_set_halt(struct usb_ep *_ep, int value) +{ + struct r8a66597_ep *ep = container_of(_ep, struct r8a66597_ep, ep); + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&ep->r8a66597->lock, flags); + if (!list_empty(&ep->queue)) { + ret = -EAGAIN; + } else if (value) { + ep->busy = 1; + pipe_stall(ep->r8a66597, ep->pipenum); + } else { + ep->busy = 0; + ep->wedge = 0; + pipe_stop(ep->r8a66597, ep->pipenum); + } + spin_unlock_irqrestore(&ep->r8a66597->lock, flags); + return ret; +} + +static int r8a66597_set_wedge(struct usb_ep *_ep) +{ + struct r8a66597_ep *ep; + unsigned long flags; + + ep = container_of(_ep, struct r8a66597_ep, ep); + + if (!ep || !ep->ep.desc) + return -EINVAL; + + spin_lock_irqsave(&ep->r8a66597->lock, flags); + ep->wedge = 1; + spin_unlock_irqrestore(&ep->r8a66597->lock, flags); + + return usb_ep_set_halt(_ep); +} + +static void r8a66597_fifo_flush(struct usb_ep *_ep) +{ + struct r8a66597_ep *ep; + unsigned long flags; + + ep = container_of(_ep, struct r8a66597_ep, ep); + spin_lock_irqsave(&ep->r8a66597->lock, flags); + if (list_empty(&ep->queue) && !ep->busy) { + pipe_stop(ep->r8a66597, ep->pipenum); + r8a66597_bclr(ep->r8a66597, BCLR, ep->fifoctr); + r8a66597_write(ep->r8a66597, ACLRM, ep->pipectr); + r8a66597_write(ep->r8a66597, 0, ep->pipectr); + } + spin_unlock_irqrestore(&ep->r8a66597->lock, flags); +} + +static const struct usb_ep_ops r8a66597_ep_ops = { + .enable = r8a66597_enable, + .disable = r8a66597_disable, + + .alloc_request = r8a66597_alloc_request, + .free_request = r8a66597_free_request, + + .queue = r8a66597_queue, + .dequeue = r8a66597_dequeue, + + .set_halt = r8a66597_set_halt, + .set_wedge = r8a66597_set_wedge, + .fifo_flush = r8a66597_fifo_flush, +}; + +/*-------------------------------------------------------------------------*/ +static int r8a66597_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget); + + if (!driver + || driver->max_speed < USB_SPEED_HIGH + || !driver->setup) + return -EINVAL; + if (!r8a66597) + return -ENODEV; + + /* hook up the driver */ + r8a66597->driver = driver; + + init_controller(r8a66597); + r8a66597_bset(r8a66597, VBSE, INTENB0); + if (r8a66597_read(r8a66597, INTSTS0) & VBSTS) { + r8a66597_start_xclock(r8a66597); + /* start vbus sampling */ + r8a66597->old_vbus = r8a66597_read(r8a66597, + INTSTS0) & VBSTS; + r8a66597->scount = R8A66597_MAX_SAMPLING; + mod_timer(&r8a66597->timer, jiffies + msecs_to_jiffies(50)); + } + + return 0; +} + +static int r8a66597_stop(struct usb_gadget *gadget) +{ + struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget); + unsigned long flags; + + spin_lock_irqsave(&r8a66597->lock, flags); + r8a66597_bclr(r8a66597, VBSE, INTENB0); + disable_controller(r8a66597); + spin_unlock_irqrestore(&r8a66597->lock, flags); + + r8a66597->driver = NULL; + return 0; +} + +/*-------------------------------------------------------------------------*/ +static int r8a66597_get_frame(struct usb_gadget *_gadget) +{ + struct r8a66597 *r8a66597 = gadget_to_r8a66597(_gadget); + return r8a66597_read(r8a66597, FRMNUM) & 0x03FF; +} + +static int r8a66597_pullup(struct usb_gadget *gadget, int is_on) +{ + struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget); + unsigned long flags; + + spin_lock_irqsave(&r8a66597->lock, flags); + if (is_on) + r8a66597_bset(r8a66597, DPRPU, SYSCFG0); + else + r8a66597_bclr(r8a66597, DPRPU, SYSCFG0); + spin_unlock_irqrestore(&r8a66597->lock, flags); + + return 0; +} + +static int r8a66597_set_selfpowered(struct usb_gadget *gadget, int is_self) +{ + struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget); + + gadget->is_selfpowered = (is_self != 0); + if (is_self) + r8a66597->device_status |= 1 << USB_DEVICE_SELF_POWERED; + else + r8a66597->device_status &= ~(1 << USB_DEVICE_SELF_POWERED); + + return 0; +} + +static const struct usb_gadget_ops r8a66597_gadget_ops = { + .get_frame = r8a66597_get_frame, + .udc_start = r8a66597_start, + .udc_stop = r8a66597_stop, + .pullup = r8a66597_pullup, + .set_selfpowered = r8a66597_set_selfpowered, +}; + +static int r8a66597_remove(struct platform_device *pdev) +{ + struct r8a66597 *r8a66597 = platform_get_drvdata(pdev); + + usb_del_gadget_udc(&r8a66597->gadget); + del_timer_sync(&r8a66597->timer); + r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req); + + if (r8a66597->pdata->on_chip) { + clk_disable_unprepare(r8a66597->clk); + } + + return 0; +} + +static void nop_completion(struct usb_ep *ep, struct usb_request *r) +{ +} + +static int r8a66597_sudmac_ioremap(struct r8a66597 *r8a66597, + struct platform_device *pdev) +{ + r8a66597->sudmac_reg = + devm_platform_ioremap_resource_byname(pdev, "sudmac"); + return PTR_ERR_OR_ZERO(r8a66597->sudmac_reg); +} + +static int r8a66597_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + char clk_name[8]; + struct resource *ires; + int irq; + void __iomem *reg = NULL; + struct r8a66597 *r8a66597 = NULL; + int ret = 0; + int i; + unsigned long irq_trigger; + + reg = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(reg)) + return PTR_ERR(reg); + + ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!ires) + return -EINVAL; + irq = ires->start; + irq_trigger = ires->flags & IRQF_TRIGGER_MASK; + + if (irq < 0) { + dev_err(dev, "platform_get_irq error.\n"); + return -ENODEV; + } + + /* initialize ucd */ + r8a66597 = devm_kzalloc(dev, sizeof(struct r8a66597), GFP_KERNEL); + if (r8a66597 == NULL) + return -ENOMEM; + + spin_lock_init(&r8a66597->lock); + platform_set_drvdata(pdev, r8a66597); + r8a66597->pdata = dev_get_platdata(dev); + r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW; + + r8a66597->gadget.ops = &r8a66597_gadget_ops; + r8a66597->gadget.max_speed = USB_SPEED_HIGH; + r8a66597->gadget.name = udc_name; + + timer_setup(&r8a66597->timer, r8a66597_timer, 0); + r8a66597->reg = reg; + + if (r8a66597->pdata->on_chip) { + snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id); + r8a66597->clk = devm_clk_get(dev, clk_name); + if (IS_ERR(r8a66597->clk)) { + dev_err(dev, "cannot get clock \"%s\"\n", clk_name); + return PTR_ERR(r8a66597->clk); + } + clk_prepare_enable(r8a66597->clk); + } + + if (r8a66597->pdata->sudmac) { + ret = r8a66597_sudmac_ioremap(r8a66597, pdev); + if (ret < 0) + goto clean_up2; + } + + disable_controller(r8a66597); /* make sure controller is disabled */ + + ret = devm_request_irq(dev, irq, r8a66597_irq, IRQF_SHARED, + udc_name, r8a66597); + if (ret < 0) { + dev_err(dev, "request_irq error (%d)\n", ret); + goto clean_up2; + } + + INIT_LIST_HEAD(&r8a66597->gadget.ep_list); + r8a66597->gadget.ep0 = &r8a66597->ep[0].ep; + INIT_LIST_HEAD(&r8a66597->gadget.ep0->ep_list); + for (i = 0; i < R8A66597_MAX_NUM_PIPE; i++) { + struct r8a66597_ep *ep = &r8a66597->ep[i]; + + if (i != 0) { + INIT_LIST_HEAD(&r8a66597->ep[i].ep.ep_list); + list_add_tail(&r8a66597->ep[i].ep.ep_list, + &r8a66597->gadget.ep_list); + } + ep->r8a66597 = r8a66597; + INIT_LIST_HEAD(&ep->queue); + ep->ep.name = r8a66597_ep_name[i]; + ep->ep.ops = &r8a66597_ep_ops; + usb_ep_set_maxpacket_limit(&ep->ep, 512); + + if (i == 0) { + ep->ep.caps.type_control = true; + } else { + ep->ep.caps.type_iso = true; + ep->ep.caps.type_bulk = true; + ep->ep.caps.type_int = true; + } + ep->ep.caps.dir_in = true; + ep->ep.caps.dir_out = true; + } + usb_ep_set_maxpacket_limit(&r8a66597->ep[0].ep, 64); + r8a66597->ep[0].pipenum = 0; + r8a66597->ep[0].fifoaddr = CFIFO; + r8a66597->ep[0].fifosel = CFIFOSEL; + r8a66597->ep[0].fifoctr = CFIFOCTR; + r8a66597->ep[0].pipectr = get_pipectr_addr(0); + r8a66597->pipenum2ep[0] = &r8a66597->ep[0]; + r8a66597->epaddr2ep[0] = &r8a66597->ep[0]; + + r8a66597->ep0_req = r8a66597_alloc_request(&r8a66597->ep[0].ep, + GFP_KERNEL); + if (r8a66597->ep0_req == NULL) { + ret = -ENOMEM; + goto clean_up2; + } + r8a66597->ep0_req->complete = nop_completion; + + ret = usb_add_gadget_udc(dev, &r8a66597->gadget); + if (ret) + goto err_add_udc; + + dev_info(dev, "version %s\n", DRIVER_VERSION); + return 0; + +err_add_udc: + r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req); +clean_up2: + if (r8a66597->pdata->on_chip) + clk_disable_unprepare(r8a66597->clk); + + if (r8a66597->ep0_req) + r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req); + + return ret; +} + +/*-------------------------------------------------------------------------*/ +static struct platform_driver r8a66597_driver = { + .remove = r8a66597_remove, + .driver = { + .name = udc_name, + }, +}; + +module_platform_driver_probe(r8a66597_driver, r8a66597_probe); + +MODULE_DESCRIPTION("R8A66597 USB gadget driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Yoshihiro Shimoda"); +MODULE_ALIAS("platform:r8a66597_udc"); diff --git a/drivers/usb/gadget/udc/r8a66597-udc.h b/drivers/usb/gadget/udc/r8a66597-udc.h new file mode 100644 index 000000000..9a115caba --- /dev/null +++ b/drivers/usb/gadget/udc/r8a66597-udc.h @@ -0,0 +1,287 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * R8A66597 UDC + * + * Copyright (C) 2007-2009 Renesas Solutions Corp. + * + * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> + */ + +#ifndef __R8A66597_H__ +#define __R8A66597_H__ + +#include <linux/clk.h> +#include <linux/usb/r8a66597.h> + +#define R8A66597_MAX_SAMPLING 10 + +#define R8A66597_MAX_NUM_PIPE 8 +#define R8A66597_MAX_NUM_BULK 3 +#define R8A66597_MAX_NUM_ISOC 2 +#define R8A66597_MAX_NUM_INT 2 + +#define R8A66597_BASE_PIPENUM_BULK 3 +#define R8A66597_BASE_PIPENUM_ISOC 1 +#define R8A66597_BASE_PIPENUM_INT 6 + +#define R8A66597_BASE_BUFNUM 6 +#define R8A66597_MAX_BUFNUM 0x4F + +#define is_bulk_pipe(pipenum) \ + ((pipenum >= R8A66597_BASE_PIPENUM_BULK) && \ + (pipenum < (R8A66597_BASE_PIPENUM_BULK + R8A66597_MAX_NUM_BULK))) +#define is_interrupt_pipe(pipenum) \ + ((pipenum >= R8A66597_BASE_PIPENUM_INT) && \ + (pipenum < (R8A66597_BASE_PIPENUM_INT + R8A66597_MAX_NUM_INT))) +#define is_isoc_pipe(pipenum) \ + ((pipenum >= R8A66597_BASE_PIPENUM_ISOC) && \ + (pipenum < (R8A66597_BASE_PIPENUM_ISOC + R8A66597_MAX_NUM_ISOC))) + +#define r8a66597_is_sudmac(r8a66597) (r8a66597->pdata->sudmac) +struct r8a66597_pipe_info { + u16 pipe; + u16 epnum; + u16 maxpacket; + u16 type; + u16 interval; + u16 dir_in; +}; + +struct r8a66597_request { + struct usb_request req; + struct list_head queue; +}; + +struct r8a66597_ep { + struct usb_ep ep; + struct r8a66597 *r8a66597; + struct r8a66597_dma *dma; + + struct list_head queue; + unsigned busy:1; + unsigned wedge:1; + unsigned internal_ccpl:1; /* use only control */ + + /* this member can able to after r8a66597_enable */ + unsigned use_dma:1; + u16 pipenum; + u16 type; + + /* register address */ + unsigned char fifoaddr; + unsigned char fifosel; + unsigned char fifoctr; + unsigned char pipectr; + unsigned char pipetre; + unsigned char pipetrn; +}; + +struct r8a66597_dma { + unsigned used:1; + unsigned dir:1; /* 1 = IN(write), 0 = OUT(read) */ +}; + +struct r8a66597 { + spinlock_t lock; + void __iomem *reg; + void __iomem *sudmac_reg; + + struct clk *clk; + struct r8a66597_platdata *pdata; + + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + + struct r8a66597_ep ep[R8A66597_MAX_NUM_PIPE]; + struct r8a66597_ep *pipenum2ep[R8A66597_MAX_NUM_PIPE]; + struct r8a66597_ep *epaddr2ep[16]; + struct r8a66597_dma dma; + + struct timer_list timer; + struct usb_request *ep0_req; /* for internal request */ + u16 ep0_data; /* for internal request */ + u16 old_vbus; + u16 scount; + u16 old_dvsq; + u16 device_status; /* for GET_STATUS */ + + /* pipe config */ + unsigned char bulk; + unsigned char interrupt; + unsigned char isochronous; + unsigned char num_dma; + + unsigned irq_sense_low:1; +}; + +#define gadget_to_r8a66597(_gadget) \ + container_of(_gadget, struct r8a66597, gadget) +#define r8a66597_to_gadget(r8a66597) (&r8a66597->gadget) +#define r8a66597_to_dev(r8a66597) (r8a66597->gadget.dev.parent) + +static inline u16 r8a66597_read(struct r8a66597 *r8a66597, unsigned long offset) +{ + return ioread16(r8a66597->reg + offset); +} + +static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597, + unsigned long offset, + unsigned char *buf, + int len) +{ + void __iomem *fifoaddr = r8a66597->reg + offset; + unsigned int data = 0; + int i; + + if (r8a66597->pdata->on_chip) { + /* 32-bit accesses for on_chip controllers */ + + /* aligned buf case */ + if (len >= 4 && !((unsigned long)buf & 0x03)) { + ioread32_rep(fifoaddr, buf, len / 4); + buf += len & ~0x03; + len &= 0x03; + } + + /* unaligned buf case */ + for (i = 0; i < len; i++) { + if (!(i & 0x03)) + data = ioread32(fifoaddr); + + buf[i] = (data >> ((i & 0x03) * 8)) & 0xff; + } + } else { + /* 16-bit accesses for external controllers */ + + /* aligned buf case */ + if (len >= 2 && !((unsigned long)buf & 0x01)) { + ioread16_rep(fifoaddr, buf, len / 2); + buf += len & ~0x01; + len &= 0x01; + } + + /* unaligned buf case */ + for (i = 0; i < len; i++) { + if (!(i & 0x01)) + data = ioread16(fifoaddr); + + buf[i] = (data >> ((i & 0x01) * 8)) & 0xff; + } + } +} + +static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val, + unsigned long offset) +{ + iowrite16(val, r8a66597->reg + offset); +} + +static inline void r8a66597_mdfy(struct r8a66597 *r8a66597, + u16 val, u16 pat, unsigned long offset) +{ + u16 tmp; + tmp = r8a66597_read(r8a66597, offset); + tmp = tmp & (~pat); + tmp = tmp | val; + r8a66597_write(r8a66597, tmp, offset); +} + +#define r8a66597_bclr(r8a66597, val, offset) \ + r8a66597_mdfy(r8a66597, 0, val, offset) +#define r8a66597_bset(r8a66597, val, offset) \ + r8a66597_mdfy(r8a66597, val, 0, offset) + +static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597, + struct r8a66597_ep *ep, + unsigned char *buf, + int len) +{ + void __iomem *fifoaddr = r8a66597->reg + ep->fifoaddr; + int adj = 0; + int i; + + if (r8a66597->pdata->on_chip) { + /* 32-bit access only if buf is 32-bit aligned */ + if (len >= 4 && !((unsigned long)buf & 0x03)) { + iowrite32_rep(fifoaddr, buf, len / 4); + buf += len & ~0x03; + len &= 0x03; + } + } else { + /* 16-bit access only if buf is 16-bit aligned */ + if (len >= 2 && !((unsigned long)buf & 0x01)) { + iowrite16_rep(fifoaddr, buf, len / 2); + buf += len & ~0x01; + len &= 0x01; + } + } + + /* adjust fifo address in the little endian case */ + if (!(r8a66597_read(r8a66597, CFIFOSEL) & BIGEND)) { + if (r8a66597->pdata->on_chip) + adj = 0x03; /* 32-bit wide */ + else + adj = 0x01; /* 16-bit wide */ + } + + if (r8a66597->pdata->wr0_shorted_to_wr1) + r8a66597_bclr(r8a66597, MBW_16, ep->fifosel); + for (i = 0; i < len; i++) + iowrite8(buf[i], fifoaddr + adj - (i & adj)); + if (r8a66597->pdata->wr0_shorted_to_wr1) + r8a66597_bclr(r8a66597, MBW_16, ep->fifosel); +} + +static inline u16 get_xtal_from_pdata(struct r8a66597_platdata *pdata) +{ + u16 clock = 0; + + switch (pdata->xtal) { + case R8A66597_PLATDATA_XTAL_12MHZ: + clock = XTAL12; + break; + case R8A66597_PLATDATA_XTAL_24MHZ: + clock = XTAL24; + break; + case R8A66597_PLATDATA_XTAL_48MHZ: + clock = XTAL48; + break; + default: + printk(KERN_ERR "r8a66597: platdata clock is wrong.\n"); + break; + } + + return clock; +} + +static inline u32 r8a66597_sudmac_read(struct r8a66597 *r8a66597, + unsigned long offset) +{ + return ioread32(r8a66597->sudmac_reg + offset); +} + +static inline void r8a66597_sudmac_write(struct r8a66597 *r8a66597, u32 val, + unsigned long offset) +{ + iowrite32(val, r8a66597->sudmac_reg + offset); +} + +#define get_pipectr_addr(pipenum) (PIPE1CTR + (pipenum - 1) * 2) +#define get_pipetre_addr(pipenum) (PIPE1TRE + (pipenum - 1) * 4) +#define get_pipetrn_addr(pipenum) (PIPE1TRN + (pipenum - 1) * 4) + +#define enable_irq_ready(r8a66597, pipenum) \ + enable_pipe_irq(r8a66597, pipenum, BRDYENB) +#define disable_irq_ready(r8a66597, pipenum) \ + disable_pipe_irq(r8a66597, pipenum, BRDYENB) +#define enable_irq_empty(r8a66597, pipenum) \ + enable_pipe_irq(r8a66597, pipenum, BEMPENB) +#define disable_irq_empty(r8a66597, pipenum) \ + disable_pipe_irq(r8a66597, pipenum, BEMPENB) +#define enable_irq_nrdy(r8a66597, pipenum) \ + enable_pipe_irq(r8a66597, pipenum, NRDYENB) +#define disable_irq_nrdy(r8a66597, pipenum) \ + disable_pipe_irq(r8a66597, pipenum, NRDYENB) + +#endif /* __R8A66597_H__ */ + diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c new file mode 100644 index 000000000..32c9e3692 --- /dev/null +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -0,0 +1,2999 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Renesas USB3.0 Peripheral driver (USB gadget) + * + * Copyright (C) 2015-2017 Renesas Electronics Corporation + */ + +#include <linux/debugfs.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/err.h> +#include <linux/extcon-provider.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/reset.h> +#include <linux/sizes.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/sys_soc.h> +#include <linux/uaccess.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/of.h> +#include <linux/usb/role.h> + +/* register definitions */ +#define USB3_AXI_INT_STA 0x008 +#define USB3_AXI_INT_ENA 0x00c +#define USB3_DMA_INT_STA 0x010 +#define USB3_DMA_INT_ENA 0x014 +#define USB3_DMA_CH0_CON(n) (0x030 + ((n) - 1) * 0x10) /* n = 1 to 4 */ +#define USB3_DMA_CH0_PRD_ADR(n) (0x034 + ((n) - 1) * 0x10) /* n = 1 to 4 */ +#define USB3_USB_COM_CON 0x200 +#define USB3_USB20_CON 0x204 +#define USB3_USB30_CON 0x208 +#define USB3_USB_STA 0x210 +#define USB3_DRD_CON(p) ((p)->is_rzv2m ? 0x400 : 0x218) +#define USB3_USB_INT_STA_1 0x220 +#define USB3_USB_INT_STA_2 0x224 +#define USB3_USB_INT_ENA_1 0x228 +#define USB3_USB_INT_ENA_2 0x22c +#define USB3_STUP_DAT_0 0x230 +#define USB3_STUP_DAT_1 0x234 +#define USB3_USB_OTG_STA(p) ((p)->is_rzv2m ? 0x410 : 0x268) +#define USB3_USB_OTG_INT_STA(p) ((p)->is_rzv2m ? 0x414 : 0x26c) +#define USB3_USB_OTG_INT_ENA(p) ((p)->is_rzv2m ? 0x418 : 0x270) +#define USB3_P0_MOD 0x280 +#define USB3_P0_CON 0x288 +#define USB3_P0_STA 0x28c +#define USB3_P0_INT_STA 0x290 +#define USB3_P0_INT_ENA 0x294 +#define USB3_P0_LNG 0x2a0 +#define USB3_P0_READ 0x2a4 +#define USB3_P0_WRITE 0x2a8 +#define USB3_PIPE_COM 0x2b0 +#define USB3_PN_MOD 0x2c0 +#define USB3_PN_RAMMAP 0x2c4 +#define USB3_PN_CON 0x2c8 +#define USB3_PN_STA 0x2cc +#define USB3_PN_INT_STA 0x2d0 +#define USB3_PN_INT_ENA 0x2d4 +#define USB3_PN_LNG 0x2e0 +#define USB3_PN_READ 0x2e4 +#define USB3_PN_WRITE 0x2e8 +#define USB3_SSIFCMD 0x340 + +/* AXI_INT_ENA and AXI_INT_STA */ +#define AXI_INT_DMAINT BIT(31) +#define AXI_INT_EPCINT BIT(30) +/* PRD's n = from 1 to 4 */ +#define AXI_INT_PRDEN_CLR_STA_SHIFT(n) (16 + (n) - 1) +#define AXI_INT_PRDERR_STA_SHIFT(n) (0 + (n) - 1) +#define AXI_INT_PRDEN_CLR_STA(n) (1 << AXI_INT_PRDEN_CLR_STA_SHIFT(n)) +#define AXI_INT_PRDERR_STA(n) (1 << AXI_INT_PRDERR_STA_SHIFT(n)) + +/* DMA_INT_ENA and DMA_INT_STA */ +#define DMA_INT(n) BIT(n) + +/* DMA_CH0_CONn */ +#define DMA_CON_PIPE_DIR BIT(15) /* 1: In Transfer */ +#define DMA_CON_PIPE_NO_SHIFT 8 +#define DMA_CON_PIPE_NO_MASK GENMASK(12, DMA_CON_PIPE_NO_SHIFT) +#define DMA_COM_PIPE_NO(n) (((n) << DMA_CON_PIPE_NO_SHIFT) & \ + DMA_CON_PIPE_NO_MASK) +#define DMA_CON_PRD_EN BIT(0) + +/* LCLKSEL */ +#define LCLKSEL_LSEL BIT(18) + +/* USB_COM_CON */ +#define USB_COM_CON_CONF BIT(24) +#define USB_COM_CON_PN_WDATAIF_NL BIT(23) +#define USB_COM_CON_PN_RDATAIF_NL BIT(22) +#define USB_COM_CON_PN_LSTTR_PP BIT(21) +#define USB_COM_CON_SPD_MODE BIT(17) +#define USB_COM_CON_EP0_EN BIT(16) +#define USB_COM_CON_DEV_ADDR_SHIFT 8 +#define USB_COM_CON_DEV_ADDR_MASK GENMASK(14, USB_COM_CON_DEV_ADDR_SHIFT) +#define USB_COM_CON_DEV_ADDR(n) (((n) << USB_COM_CON_DEV_ADDR_SHIFT) & \ + USB_COM_CON_DEV_ADDR_MASK) +#define USB_COM_CON_RX_DETECTION BIT(1) +#define USB_COM_CON_PIPE_CLR BIT(0) + +/* USB20_CON */ +#define USB20_CON_B2_PUE BIT(31) +#define USB20_CON_B2_SUSPEND BIT(24) +#define USB20_CON_B2_CONNECT BIT(17) +#define USB20_CON_B2_TSTMOD_SHIFT 8 +#define USB20_CON_B2_TSTMOD_MASK GENMASK(10, USB20_CON_B2_TSTMOD_SHIFT) +#define USB20_CON_B2_TSTMOD(n) (((n) << USB20_CON_B2_TSTMOD_SHIFT) & \ + USB20_CON_B2_TSTMOD_MASK) +#define USB20_CON_B2_TSTMOD_EN BIT(0) + +/* USB30_CON */ +#define USB30_CON_POW_SEL_SHIFT 24 +#define USB30_CON_POW_SEL_MASK GENMASK(26, USB30_CON_POW_SEL_SHIFT) +#define USB30_CON_POW_SEL_IN_U3 BIT(26) +#define USB30_CON_POW_SEL_IN_DISCON 0 +#define USB30_CON_POW_SEL_P2_TO_P0 BIT(25) +#define USB30_CON_POW_SEL_P0_TO_P3 BIT(24) +#define USB30_CON_POW_SEL_P0_TO_P2 0 +#define USB30_CON_B3_PLLWAKE BIT(23) +#define USB30_CON_B3_CONNECT BIT(17) +#define USB30_CON_B3_HOTRST_CMP BIT(1) + +/* USB_STA */ +#define USB_STA_SPEED_MASK (BIT(2) | BIT(1)) +#define USB_STA_SPEED_HS BIT(2) +#define USB_STA_SPEED_FS BIT(1) +#define USB_STA_SPEED_SS 0 +#define USB_STA_VBUS_STA BIT(0) + +/* DRD_CON */ +#define DRD_CON_PERI_RST BIT(31) /* rzv2m only */ +#define DRD_CON_HOST_RST BIT(30) /* rzv2m only */ +#define DRD_CON_PERI_CON BIT(24) +#define DRD_CON_VBOUT BIT(0) + +/* USB_INT_ENA_1 and USB_INT_STA_1 */ +#define USB_INT_1_B3_PLLWKUP BIT(31) +#define USB_INT_1_B3_LUPSUCS BIT(30) +#define USB_INT_1_B3_DISABLE BIT(27) +#define USB_INT_1_B3_WRMRST BIT(21) +#define USB_INT_1_B3_HOTRST BIT(20) +#define USB_INT_1_B2_USBRST BIT(12) +#define USB_INT_1_B2_L1SPND BIT(11) +#define USB_INT_1_B2_SPND BIT(9) +#define USB_INT_1_B2_RSUM BIT(8) +#define USB_INT_1_SPEED BIT(1) +#define USB_INT_1_VBUS_CNG BIT(0) + +/* USB_INT_ENA_2 and USB_INT_STA_2 */ +#define USB_INT_2_PIPE(n) BIT(n) + +/* USB_OTG_STA, USB_OTG_INT_STA and USB_OTG_INT_ENA */ +#define USB_OTG_IDMON(p) ((p)->is_rzv2m ? BIT(0) : BIT(4)) + +/* P0_MOD */ +#define P0_MOD_DIR BIT(6) + +/* P0_CON and PN_CON */ +#define PX_CON_BYTE_EN_MASK (BIT(10) | BIT(9)) +#define PX_CON_BYTE_EN_SHIFT 9 +#define PX_CON_BYTE_EN_BYTES(n) (((n) << PX_CON_BYTE_EN_SHIFT) & \ + PX_CON_BYTE_EN_MASK) +#define PX_CON_SEND BIT(8) + +/* P0_CON */ +#define P0_CON_ST_RES_MASK (BIT(27) | BIT(26)) +#define P0_CON_ST_RES_FORCE_STALL BIT(27) +#define P0_CON_ST_RES_NORMAL BIT(26) +#define P0_CON_ST_RES_FORCE_NRDY 0 +#define P0_CON_OT_RES_MASK (BIT(25) | BIT(24)) +#define P0_CON_OT_RES_FORCE_STALL BIT(25) +#define P0_CON_OT_RES_NORMAL BIT(24) +#define P0_CON_OT_RES_FORCE_NRDY 0 +#define P0_CON_IN_RES_MASK (BIT(17) | BIT(16)) +#define P0_CON_IN_RES_FORCE_STALL BIT(17) +#define P0_CON_IN_RES_NORMAL BIT(16) +#define P0_CON_IN_RES_FORCE_NRDY 0 +#define P0_CON_RES_WEN BIT(7) +#define P0_CON_BCLR BIT(1) + +/* P0_STA and PN_STA */ +#define PX_STA_BUFSTS BIT(0) + +/* P0_INT_ENA and P0_INT_STA */ +#define P0_INT_STSED BIT(18) +#define P0_INT_STSST BIT(17) +#define P0_INT_SETUP BIT(16) +#define P0_INT_RCVNL BIT(8) +#define P0_INT_ERDY BIT(7) +#define P0_INT_FLOW BIT(6) +#define P0_INT_STALL BIT(2) +#define P0_INT_NRDY BIT(1) +#define P0_INT_BFRDY BIT(0) +#define P0_INT_ALL_BITS (P0_INT_STSED | P0_INT_SETUP | P0_INT_BFRDY) + +/* PN_MOD */ +#define PN_MOD_DIR BIT(6) +#define PN_MOD_TYPE_SHIFT 4 +#define PN_MOD_TYPE_MASK GENMASK(5, PN_MOD_TYPE_SHIFT) +#define PN_MOD_TYPE(n) (((n) << PN_MOD_TYPE_SHIFT) & \ + PN_MOD_TYPE_MASK) +#define PN_MOD_EPNUM_MASK GENMASK(3, 0) +#define PN_MOD_EPNUM(n) ((n) & PN_MOD_EPNUM_MASK) + +/* PN_RAMMAP */ +#define PN_RAMMAP_RAMAREA_SHIFT 29 +#define PN_RAMMAP_RAMAREA_MASK GENMASK(31, PN_RAMMAP_RAMAREA_SHIFT) +#define PN_RAMMAP_RAMAREA_16KB BIT(31) +#define PN_RAMMAP_RAMAREA_8KB (BIT(30) | BIT(29)) +#define PN_RAMMAP_RAMAREA_4KB BIT(30) +#define PN_RAMMAP_RAMAREA_2KB BIT(29) +#define PN_RAMMAP_RAMAREA_1KB 0 +#define PN_RAMMAP_MPKT_SHIFT 16 +#define PN_RAMMAP_MPKT_MASK GENMASK(26, PN_RAMMAP_MPKT_SHIFT) +#define PN_RAMMAP_MPKT(n) (((n) << PN_RAMMAP_MPKT_SHIFT) & \ + PN_RAMMAP_MPKT_MASK) +#define PN_RAMMAP_RAMIF_SHIFT 14 +#define PN_RAMMAP_RAMIF_MASK GENMASK(15, PN_RAMMAP_RAMIF_SHIFT) +#define PN_RAMMAP_RAMIF(n) (((n) << PN_RAMMAP_RAMIF_SHIFT) & \ + PN_RAMMAP_RAMIF_MASK) +#define PN_RAMMAP_BASEAD_MASK GENMASK(13, 0) +#define PN_RAMMAP_BASEAD(offs) (((offs) >> 3) & PN_RAMMAP_BASEAD_MASK) +#define PN_RAMMAP_DATA(area, ramif, basead) ((PN_RAMMAP_##area) | \ + (PN_RAMMAP_RAMIF(ramif)) | \ + (PN_RAMMAP_BASEAD(basead))) + +/* PN_CON */ +#define PN_CON_EN BIT(31) +#define PN_CON_DATAIF_EN BIT(30) +#define PN_CON_RES_MASK (BIT(17) | BIT(16)) +#define PN_CON_RES_FORCE_STALL BIT(17) +#define PN_CON_RES_NORMAL BIT(16) +#define PN_CON_RES_FORCE_NRDY 0 +#define PN_CON_LAST BIT(11) +#define PN_CON_RES_WEN BIT(7) +#define PN_CON_CLR BIT(0) + +/* PN_INT_STA and PN_INT_ENA */ +#define PN_INT_LSTTR BIT(4) +#define PN_INT_BFRDY BIT(0) + +/* USB3_SSIFCMD */ +#define SSIFCMD_URES_U2 BIT(9) +#define SSIFCMD_URES_U1 BIT(8) +#define SSIFCMD_UDIR_U2 BIT(7) +#define SSIFCMD_UDIR_U1 BIT(6) +#define SSIFCMD_UREQ_U2 BIT(5) +#define SSIFCMD_UREQ_U1 BIT(4) + +#define USB3_EP0_SS_MAX_PACKET_SIZE 512 +#define USB3_EP0_HSFS_MAX_PACKET_SIZE 64 +#define USB3_EP0_BUF_SIZE 8 +#define USB3_MAX_NUM_PIPES(p) ((p)->is_rzv2m ? 16 : 6) /* This includes PIPE 0 */ +#define USB3_WAIT_US 3 +#define USB3_DMA_NUM_SETTING_AREA 4 +/* + * To avoid double-meaning of "0" (xferred 65536 bytes or received zlp if + * buffer size is 65536), this driver uses the maximum size per a entry is + * 32768 bytes. + */ +#define USB3_DMA_MAX_XFER_SIZE 32768 +#define USB3_DMA_PRD_SIZE 4096 + +struct renesas_usb3; + +/* Physical Region Descriptor Table */ +struct renesas_usb3_prd { + u32 word1; +#define USB3_PRD1_E BIT(30) /* the end of chain */ +#define USB3_PRD1_U BIT(29) /* completion of transfer */ +#define USB3_PRD1_D BIT(28) /* Error occurred */ +#define USB3_PRD1_INT BIT(27) /* Interrupt occurred */ +#define USB3_PRD1_LST BIT(26) /* Last Packet */ +#define USB3_PRD1_B_INC BIT(24) +#define USB3_PRD1_MPS_8 0 +#define USB3_PRD1_MPS_16 BIT(21) +#define USB3_PRD1_MPS_32 BIT(22) +#define USB3_PRD1_MPS_64 (BIT(22) | BIT(21)) +#define USB3_PRD1_MPS_512 BIT(23) +#define USB3_PRD1_MPS_1024 (BIT(23) | BIT(21)) +#define USB3_PRD1_MPS_RESERVED (BIT(23) | BIT(22) | BIT(21)) +#define USB3_PRD1_SIZE_MASK GENMASK(15, 0) + + u32 bap; +}; +#define USB3_DMA_NUM_PRD_ENTRIES (USB3_DMA_PRD_SIZE / \ + sizeof(struct renesas_usb3_prd)) +#define USB3_DMA_MAX_XFER_SIZE_ALL_PRDS (USB3_DMA_PRD_SIZE / \ + sizeof(struct renesas_usb3_prd) * \ + USB3_DMA_MAX_XFER_SIZE) + +struct renesas_usb3_dma { + struct renesas_usb3_prd *prd; + dma_addr_t prd_dma; + int num; /* Setting area number (from 1 to 4) */ + bool used; +}; + +struct renesas_usb3_request { + struct usb_request req; + struct list_head queue; +}; + +#define USB3_EP_NAME_SIZE 8 +struct renesas_usb3_ep { + struct usb_ep ep; + struct renesas_usb3 *usb3; + struct renesas_usb3_dma *dma; + int num; + char ep_name[USB3_EP_NAME_SIZE]; + struct list_head queue; + u32 rammap_val; + bool dir_in; + bool halt; + bool wedge; + bool started; +}; + +struct renesas_usb3_priv { + int ramsize_per_ramif; /* unit = bytes */ + int num_ramif; + int ramsize_per_pipe; /* unit = bytes */ + bool workaround_for_vbus; /* if true, don't check vbus signal */ + bool is_rzv2m; /* if true, RZ/V2M SoC */ +}; + +struct renesas_usb3 { + void __iomem *reg; + struct reset_control *drd_rstc; + struct reset_control *usbp_rstc; + + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + struct extcon_dev *extcon; + struct work_struct extcon_work; + struct phy *phy; + struct dentry *dentry; + + struct usb_role_switch *role_sw; + struct device *host_dev; + struct work_struct role_work; + enum usb_role role; + + struct renesas_usb3_ep *usb3_ep; + int num_usb3_eps; + + struct renesas_usb3_dma dma[USB3_DMA_NUM_SETTING_AREA]; + + spinlock_t lock; + int disabled_count; + + struct usb_request *ep0_req; + + enum usb_role connection_state; + u16 test_mode; + u8 ep0_buf[USB3_EP0_BUF_SIZE]; + bool softconnect; + bool workaround_for_vbus; + bool extcon_host; /* check id and set EXTCON_USB_HOST */ + bool extcon_usb; /* check vbus and set EXTCON_USB */ + bool forced_b_device; + bool start_to_connect; + bool role_sw_by_connector; + bool is_rzv2m; +}; + +#define gadget_to_renesas_usb3(_gadget) \ + container_of(_gadget, struct renesas_usb3, gadget) +#define renesas_usb3_to_gadget(renesas_usb3) (&renesas_usb3->gadget) +#define usb3_to_dev(_usb3) (_usb3->gadget.dev.parent) + +#define usb_ep_to_usb3_ep(_ep) container_of(_ep, struct renesas_usb3_ep, ep) +#define usb3_ep_to_usb3(_usb3_ep) (_usb3_ep->usb3) +#define usb_req_to_usb3_req(_req) container_of(_req, \ + struct renesas_usb3_request, req) + +#define usb3_get_ep(usb3, n) ((usb3)->usb3_ep + (n)) +#define usb3_for_each_ep(usb3_ep, usb3, i) \ + for ((i) = 0, usb3_ep = usb3_get_ep(usb3, (i)); \ + (i) < (usb3)->num_usb3_eps; \ + (i)++, usb3_ep = usb3_get_ep(usb3, (i))) + +#define usb3_get_dma(usb3, i) (&(usb3)->dma[i]) +#define usb3_for_each_dma(usb3, dma, i) \ + for ((i) = 0, dma = usb3_get_dma((usb3), (i)); \ + (i) < USB3_DMA_NUM_SETTING_AREA; \ + (i)++, dma = usb3_get_dma((usb3), (i))) + +static const char udc_name[] = "renesas_usb3"; + +static bool use_dma = 1; +module_param(use_dma, bool, 0644); +MODULE_PARM_DESC(use_dma, "use dedicated DMAC"); + +static void usb3_write(struct renesas_usb3 *usb3, u32 data, u32 offs) +{ + iowrite32(data, usb3->reg + offs); +} + +static u32 usb3_read(struct renesas_usb3 *usb3, u32 offs) +{ + return ioread32(usb3->reg + offs); +} + +static void usb3_set_bit(struct renesas_usb3 *usb3, u32 bits, u32 offs) +{ + u32 val = usb3_read(usb3, offs); + + val |= bits; + usb3_write(usb3, val, offs); +} + +static void usb3_clear_bit(struct renesas_usb3 *usb3, u32 bits, u32 offs) +{ + u32 val = usb3_read(usb3, offs); + + val &= ~bits; + usb3_write(usb3, val, offs); +} + +static int usb3_wait(struct renesas_usb3 *usb3, u32 reg, u32 mask, + u32 expected) +{ + int i; + + for (i = 0; i < USB3_WAIT_US; i++) { + if ((usb3_read(usb3, reg) & mask) == expected) + return 0; + udelay(1); + } + + dev_dbg(usb3_to_dev(usb3), "%s: timed out (%8x, %08x, %08x)\n", + __func__, reg, mask, expected); + + return -EBUSY; +} + +static void renesas_usb3_extcon_work(struct work_struct *work) +{ + struct renesas_usb3 *usb3 = container_of(work, struct renesas_usb3, + extcon_work); + + extcon_set_state_sync(usb3->extcon, EXTCON_USB_HOST, usb3->extcon_host); + extcon_set_state_sync(usb3->extcon, EXTCON_USB, usb3->extcon_usb); +} + +static void usb3_enable_irq_1(struct renesas_usb3 *usb3, u32 bits) +{ + usb3_set_bit(usb3, bits, USB3_USB_INT_ENA_1); +} + +static void usb3_disable_irq_1(struct renesas_usb3 *usb3, u32 bits) +{ + usb3_clear_bit(usb3, bits, USB3_USB_INT_ENA_1); +} + +static void usb3_enable_pipe_irq(struct renesas_usb3 *usb3, int num) +{ + usb3_set_bit(usb3, USB_INT_2_PIPE(num), USB3_USB_INT_ENA_2); +} + +static void usb3_disable_pipe_irq(struct renesas_usb3 *usb3, int num) +{ + usb3_clear_bit(usb3, USB_INT_2_PIPE(num), USB3_USB_INT_ENA_2); +} + +static bool usb3_is_host(struct renesas_usb3 *usb3) +{ + return !(usb3_read(usb3, USB3_DRD_CON(usb3)) & DRD_CON_PERI_CON); +} + +static void usb3_init_axi_bridge(struct renesas_usb3 *usb3) +{ + /* Set AXI_INT */ + usb3_write(usb3, ~0, USB3_DMA_INT_STA); + usb3_write(usb3, 0, USB3_DMA_INT_ENA); + usb3_set_bit(usb3, AXI_INT_DMAINT | AXI_INT_EPCINT, USB3_AXI_INT_ENA); +} + +static void usb3_init_epc_registers(struct renesas_usb3 *usb3) +{ + usb3_write(usb3, ~0, USB3_USB_INT_STA_1); + if (!usb3->workaround_for_vbus) + usb3_enable_irq_1(usb3, USB_INT_1_VBUS_CNG); +} + +static bool usb3_wakeup_usb2_phy(struct renesas_usb3 *usb3) +{ + if (!(usb3_read(usb3, USB3_USB20_CON) & USB20_CON_B2_SUSPEND)) + return true; /* already waked it up */ + + usb3_clear_bit(usb3, USB20_CON_B2_SUSPEND, USB3_USB20_CON); + usb3_enable_irq_1(usb3, USB_INT_1_B2_RSUM); + + return false; +} + +static void usb3_usb2_pullup(struct renesas_usb3 *usb3, int pullup) +{ + u32 bits = USB20_CON_B2_PUE | USB20_CON_B2_CONNECT; + + if (usb3->softconnect && pullup) + usb3_set_bit(usb3, bits, USB3_USB20_CON); + else + usb3_clear_bit(usb3, bits, USB3_USB20_CON); +} + +static void usb3_set_test_mode(struct renesas_usb3 *usb3) +{ + u32 val = usb3_read(usb3, USB3_USB20_CON); + + val &= ~USB20_CON_B2_TSTMOD_MASK; + val |= USB20_CON_B2_TSTMOD(usb3->test_mode); + usb3_write(usb3, val | USB20_CON_B2_TSTMOD_EN, USB3_USB20_CON); + if (!usb3->test_mode) + usb3_clear_bit(usb3, USB20_CON_B2_TSTMOD_EN, USB3_USB20_CON); +} + +static void usb3_start_usb2_connection(struct renesas_usb3 *usb3) +{ + usb3->disabled_count++; + usb3_set_bit(usb3, USB_COM_CON_EP0_EN, USB3_USB_COM_CON); + usb3_set_bit(usb3, USB_COM_CON_SPD_MODE, USB3_USB_COM_CON); + usb3_usb2_pullup(usb3, 1); +} + +static int usb3_is_usb3_phy_in_u3(struct renesas_usb3 *usb3) +{ + return usb3_read(usb3, USB3_USB30_CON) & USB30_CON_POW_SEL_IN_U3; +} + +static bool usb3_wakeup_usb3_phy(struct renesas_usb3 *usb3) +{ + if (!usb3_is_usb3_phy_in_u3(usb3)) + return true; /* already waked it up */ + + usb3_set_bit(usb3, USB30_CON_B3_PLLWAKE, USB3_USB30_CON); + usb3_enable_irq_1(usb3, USB_INT_1_B3_PLLWKUP); + + return false; +} + +static u16 usb3_feature_get_un_enabled(struct renesas_usb3 *usb3) +{ + u32 mask_u2 = SSIFCMD_UDIR_U2 | SSIFCMD_UREQ_U2; + u32 mask_u1 = SSIFCMD_UDIR_U1 | SSIFCMD_UREQ_U1; + u32 val = usb3_read(usb3, USB3_SSIFCMD); + u16 ret = 0; + + /* Enables {U2,U1} if the bits of UDIR and UREQ are set to 0 */ + if (!(val & mask_u2)) + ret |= 1 << USB_DEV_STAT_U2_ENABLED; + if (!(val & mask_u1)) + ret |= 1 << USB_DEV_STAT_U1_ENABLED; + + return ret; +} + +static void usb3_feature_u2_enable(struct renesas_usb3 *usb3, bool enable) +{ + u32 bits = SSIFCMD_UDIR_U2 | SSIFCMD_UREQ_U2; + + /* Enables U2 if the bits of UDIR and UREQ are set to 0 */ + if (enable) + usb3_clear_bit(usb3, bits, USB3_SSIFCMD); + else + usb3_set_bit(usb3, bits, USB3_SSIFCMD); +} + +static void usb3_feature_u1_enable(struct renesas_usb3 *usb3, bool enable) +{ + u32 bits = SSIFCMD_UDIR_U1 | SSIFCMD_UREQ_U1; + + /* Enables U1 if the bits of UDIR and UREQ are set to 0 */ + if (enable) + usb3_clear_bit(usb3, bits, USB3_SSIFCMD); + else + usb3_set_bit(usb3, bits, USB3_SSIFCMD); +} + +static void usb3_start_operation_for_usb3(struct renesas_usb3 *usb3) +{ + usb3_set_bit(usb3, USB_COM_CON_EP0_EN, USB3_USB_COM_CON); + usb3_clear_bit(usb3, USB_COM_CON_SPD_MODE, USB3_USB_COM_CON); + usb3_set_bit(usb3, USB30_CON_B3_CONNECT, USB3_USB30_CON); +} + +static void usb3_start_usb3_connection(struct renesas_usb3 *usb3) +{ + usb3_start_operation_for_usb3(usb3); + usb3_set_bit(usb3, USB_COM_CON_RX_DETECTION, USB3_USB_COM_CON); + + usb3_enable_irq_1(usb3, USB_INT_1_B3_LUPSUCS | USB_INT_1_B3_DISABLE | + USB_INT_1_SPEED); +} + +static void usb3_stop_usb3_connection(struct renesas_usb3 *usb3) +{ + usb3_clear_bit(usb3, USB30_CON_B3_CONNECT, USB3_USB30_CON); +} + +static void usb3_transition_to_default_state(struct renesas_usb3 *usb3, + bool is_usb3) +{ + usb3_set_bit(usb3, USB_INT_2_PIPE(0), USB3_USB_INT_ENA_2); + usb3_write(usb3, P0_INT_ALL_BITS, USB3_P0_INT_STA); + usb3_set_bit(usb3, P0_INT_ALL_BITS, USB3_P0_INT_ENA); + + if (is_usb3) + usb3_enable_irq_1(usb3, USB_INT_1_B3_WRMRST | + USB_INT_1_B3_HOTRST); + else + usb3_enable_irq_1(usb3, USB_INT_1_B2_SPND | + USB_INT_1_B2_L1SPND | USB_INT_1_B2_USBRST); +} + +static void usb3_connect(struct renesas_usb3 *usb3) +{ + if (usb3_wakeup_usb3_phy(usb3)) + usb3_start_usb3_connection(usb3); +} + +static void usb3_reset_epc(struct renesas_usb3 *usb3) +{ + usb3_clear_bit(usb3, USB_COM_CON_CONF, USB3_USB_COM_CON); + usb3_clear_bit(usb3, USB_COM_CON_EP0_EN, USB3_USB_COM_CON); + usb3_set_bit(usb3, USB_COM_CON_PIPE_CLR, USB3_USB_COM_CON); + usb3->test_mode = 0; + usb3_set_test_mode(usb3); +} + +static void usb3_disconnect(struct renesas_usb3 *usb3) +{ + usb3->disabled_count = 0; + usb3_usb2_pullup(usb3, 0); + usb3_clear_bit(usb3, USB30_CON_B3_CONNECT, USB3_USB30_CON); + usb3_reset_epc(usb3); + usb3_disable_irq_1(usb3, USB_INT_1_B2_RSUM | USB_INT_1_B3_PLLWKUP | + USB_INT_1_B3_LUPSUCS | USB_INT_1_B3_DISABLE | + USB_INT_1_SPEED | USB_INT_1_B3_WRMRST | + USB_INT_1_B3_HOTRST | USB_INT_1_B2_SPND | + USB_INT_1_B2_L1SPND | USB_INT_1_B2_USBRST); + usb3_clear_bit(usb3, USB_COM_CON_SPD_MODE, USB3_USB_COM_CON); + usb3_init_epc_registers(usb3); + + if (usb3->driver) + usb3->driver->disconnect(&usb3->gadget); +} + +static void usb3_check_vbus(struct renesas_usb3 *usb3) +{ + if (usb3->workaround_for_vbus) { + usb3_connect(usb3); + } else { + usb3->extcon_usb = !!(usb3_read(usb3, USB3_USB_STA) & + USB_STA_VBUS_STA); + if (usb3->extcon_usb) + usb3_connect(usb3); + else + usb3_disconnect(usb3); + + schedule_work(&usb3->extcon_work); + } +} + +static void renesas_usb3_role_work(struct work_struct *work) +{ + struct renesas_usb3 *usb3 = + container_of(work, struct renesas_usb3, role_work); + + usb_role_switch_set_role(usb3->role_sw, usb3->role); +} + +static void usb3_set_mode(struct renesas_usb3 *usb3, bool host) +{ + if (usb3->is_rzv2m) { + if (host) { + usb3_set_bit(usb3, DRD_CON_PERI_RST, USB3_DRD_CON(usb3)); + usb3_clear_bit(usb3, DRD_CON_HOST_RST, USB3_DRD_CON(usb3)); + } else { + usb3_set_bit(usb3, DRD_CON_HOST_RST, USB3_DRD_CON(usb3)); + usb3_clear_bit(usb3, DRD_CON_PERI_RST, USB3_DRD_CON(usb3)); + } + } + + if (host) + usb3_clear_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON(usb3)); + else + usb3_set_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON(usb3)); +} + +static void usb3_set_mode_by_role_sw(struct renesas_usb3 *usb3, bool host) +{ + if (usb3->role_sw) { + usb3->role = host ? USB_ROLE_HOST : USB_ROLE_DEVICE; + schedule_work(&usb3->role_work); + } else { + usb3_set_mode(usb3, host); + } +} + +static void usb3_vbus_out(struct renesas_usb3 *usb3, bool enable) +{ + if (enable) + usb3_set_bit(usb3, DRD_CON_VBOUT, USB3_DRD_CON(usb3)); + else + usb3_clear_bit(usb3, DRD_CON_VBOUT, USB3_DRD_CON(usb3)); +} + +static void usb3_mode_config(struct renesas_usb3 *usb3, bool host, bool a_dev) +{ + unsigned long flags; + + spin_lock_irqsave(&usb3->lock, flags); + if (!usb3->role_sw_by_connector || + usb3->connection_state != USB_ROLE_NONE) { + usb3_set_mode_by_role_sw(usb3, host); + usb3_vbus_out(usb3, a_dev); + } + /* for A-Peripheral or forced B-device mode */ + if ((!host && a_dev) || usb3->start_to_connect) + usb3_connect(usb3); + spin_unlock_irqrestore(&usb3->lock, flags); +} + +static bool usb3_is_a_device(struct renesas_usb3 *usb3) +{ + return !(usb3_read(usb3, USB3_USB_OTG_STA(usb3)) & USB_OTG_IDMON(usb3)); +} + +static void usb3_check_id(struct renesas_usb3 *usb3) +{ + usb3->extcon_host = usb3_is_a_device(usb3); + + if ((!usb3->role_sw_by_connector && usb3->extcon_host && + !usb3->forced_b_device) || usb3->connection_state == USB_ROLE_HOST) + usb3_mode_config(usb3, true, true); + else + usb3_mode_config(usb3, false, false); + + schedule_work(&usb3->extcon_work); +} + +static void renesas_usb3_init_controller(struct renesas_usb3 *usb3) +{ + usb3_init_axi_bridge(usb3); + usb3_init_epc_registers(usb3); + usb3_set_bit(usb3, USB_COM_CON_PN_WDATAIF_NL | + USB_COM_CON_PN_RDATAIF_NL | USB_COM_CON_PN_LSTTR_PP, + USB3_USB_COM_CON); + usb3_write(usb3, USB_OTG_IDMON(usb3), USB3_USB_OTG_INT_STA(usb3)); + usb3_write(usb3, USB_OTG_IDMON(usb3), USB3_USB_OTG_INT_ENA(usb3)); + + usb3_check_id(usb3); + usb3_check_vbus(usb3); +} + +static void renesas_usb3_stop_controller(struct renesas_usb3 *usb3) +{ + usb3_disconnect(usb3); + usb3_write(usb3, 0, USB3_P0_INT_ENA); + usb3_write(usb3, 0, USB3_USB_OTG_INT_ENA(usb3)); + usb3_write(usb3, 0, USB3_USB_INT_ENA_1); + usb3_write(usb3, 0, USB3_USB_INT_ENA_2); + usb3_write(usb3, 0, USB3_AXI_INT_ENA); +} + +static void usb3_irq_epc_int_1_pll_wakeup(struct renesas_usb3 *usb3) +{ + usb3_disable_irq_1(usb3, USB_INT_1_B3_PLLWKUP); + usb3_clear_bit(usb3, USB30_CON_B3_PLLWAKE, USB3_USB30_CON); + usb3_start_usb3_connection(usb3); +} + +static void usb3_irq_epc_int_1_linkup_success(struct renesas_usb3 *usb3) +{ + usb3_transition_to_default_state(usb3, true); +} + +static void usb3_irq_epc_int_1_resume(struct renesas_usb3 *usb3) +{ + usb3_disable_irq_1(usb3, USB_INT_1_B2_RSUM); + usb3_start_usb2_connection(usb3); + usb3_transition_to_default_state(usb3, false); +} + +static void usb3_irq_epc_int_1_suspend(struct renesas_usb3 *usb3) +{ + usb3_disable_irq_1(usb3, USB_INT_1_B2_SPND); + + if (usb3->gadget.speed != USB_SPEED_UNKNOWN && + usb3->gadget.state != USB_STATE_NOTATTACHED) { + if (usb3->driver && usb3->driver->suspend) + usb3->driver->suspend(&usb3->gadget); + usb_gadget_set_state(&usb3->gadget, USB_STATE_SUSPENDED); + } +} + +static void usb3_irq_epc_int_1_disable(struct renesas_usb3 *usb3) +{ + usb3_stop_usb3_connection(usb3); + if (usb3_wakeup_usb2_phy(usb3)) + usb3_irq_epc_int_1_resume(usb3); +} + +static void usb3_irq_epc_int_1_bus_reset(struct renesas_usb3 *usb3) +{ + usb3_reset_epc(usb3); + if (usb3->disabled_count < 3) + usb3_start_usb3_connection(usb3); + else + usb3_start_usb2_connection(usb3); +} + +static void usb3_irq_epc_int_1_vbus_change(struct renesas_usb3 *usb3) +{ + usb3_check_vbus(usb3); +} + +static void usb3_irq_epc_int_1_hot_reset(struct renesas_usb3 *usb3) +{ + usb3_reset_epc(usb3); + usb3_set_bit(usb3, USB_COM_CON_EP0_EN, USB3_USB_COM_CON); + + /* This bit shall be set within 12ms from the start of HotReset */ + usb3_set_bit(usb3, USB30_CON_B3_HOTRST_CMP, USB3_USB30_CON); +} + +static void usb3_irq_epc_int_1_warm_reset(struct renesas_usb3 *usb3) +{ + usb3_reset_epc(usb3); + usb3_set_bit(usb3, USB_COM_CON_EP0_EN, USB3_USB_COM_CON); + + usb3_start_operation_for_usb3(usb3); + usb3_enable_irq_1(usb3, USB_INT_1_SPEED); +} + +static void usb3_irq_epc_int_1_speed(struct renesas_usb3 *usb3) +{ + u32 speed = usb3_read(usb3, USB3_USB_STA) & USB_STA_SPEED_MASK; + + switch (speed) { + case USB_STA_SPEED_SS: + usb3->gadget.speed = USB_SPEED_SUPER; + usb3->gadget.ep0->maxpacket = USB3_EP0_SS_MAX_PACKET_SIZE; + break; + case USB_STA_SPEED_HS: + usb3->gadget.speed = USB_SPEED_HIGH; + usb3->gadget.ep0->maxpacket = USB3_EP0_HSFS_MAX_PACKET_SIZE; + break; + case USB_STA_SPEED_FS: + usb3->gadget.speed = USB_SPEED_FULL; + usb3->gadget.ep0->maxpacket = USB3_EP0_HSFS_MAX_PACKET_SIZE; + break; + default: + usb3->gadget.speed = USB_SPEED_UNKNOWN; + break; + } +} + +static void usb3_irq_epc_int_1(struct renesas_usb3 *usb3, u32 int_sta_1) +{ + if (int_sta_1 & USB_INT_1_B3_PLLWKUP) + usb3_irq_epc_int_1_pll_wakeup(usb3); + + if (int_sta_1 & USB_INT_1_B3_LUPSUCS) + usb3_irq_epc_int_1_linkup_success(usb3); + + if (int_sta_1 & USB_INT_1_B3_HOTRST) + usb3_irq_epc_int_1_hot_reset(usb3); + + if (int_sta_1 & USB_INT_1_B3_WRMRST) + usb3_irq_epc_int_1_warm_reset(usb3); + + if (int_sta_1 & USB_INT_1_B3_DISABLE) + usb3_irq_epc_int_1_disable(usb3); + + if (int_sta_1 & USB_INT_1_B2_USBRST) + usb3_irq_epc_int_1_bus_reset(usb3); + + if (int_sta_1 & USB_INT_1_B2_RSUM) + usb3_irq_epc_int_1_resume(usb3); + + if (int_sta_1 & USB_INT_1_B2_SPND) + usb3_irq_epc_int_1_suspend(usb3); + + if (int_sta_1 & USB_INT_1_SPEED) + usb3_irq_epc_int_1_speed(usb3); + + if (int_sta_1 & USB_INT_1_VBUS_CNG) + usb3_irq_epc_int_1_vbus_change(usb3); +} + +static struct renesas_usb3_request *__usb3_get_request(struct renesas_usb3_ep + *usb3_ep) +{ + return list_first_entry_or_null(&usb3_ep->queue, + struct renesas_usb3_request, queue); +} + +static struct renesas_usb3_request *usb3_get_request(struct renesas_usb3_ep + *usb3_ep) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + struct renesas_usb3_request *usb3_req; + unsigned long flags; + + spin_lock_irqsave(&usb3->lock, flags); + usb3_req = __usb3_get_request(usb3_ep); + spin_unlock_irqrestore(&usb3->lock, flags); + + return usb3_req; +} + +static void __usb3_request_done(struct renesas_usb3_ep *usb3_ep, + struct renesas_usb3_request *usb3_req, + int status) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + + dev_dbg(usb3_to_dev(usb3), "giveback: ep%2d, %u, %u, %d\n", + usb3_ep->num, usb3_req->req.length, usb3_req->req.actual, + status); + usb3_req->req.status = status; + usb3_ep->started = false; + list_del_init(&usb3_req->queue); + spin_unlock(&usb3->lock); + usb_gadget_giveback_request(&usb3_ep->ep, &usb3_req->req); + spin_lock(&usb3->lock); +} + +static void usb3_request_done(struct renesas_usb3_ep *usb3_ep, + struct renesas_usb3_request *usb3_req, int status) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + unsigned long flags; + + spin_lock_irqsave(&usb3->lock, flags); + __usb3_request_done(usb3_ep, usb3_req, status); + spin_unlock_irqrestore(&usb3->lock, flags); +} + +static void usb3_irq_epc_pipe0_status_end(struct renesas_usb3 *usb3) +{ + struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, 0); + struct renesas_usb3_request *usb3_req = usb3_get_request(usb3_ep); + + if (usb3_req) + usb3_request_done(usb3_ep, usb3_req, 0); + if (usb3->test_mode) + usb3_set_test_mode(usb3); +} + +static void usb3_get_setup_data(struct renesas_usb3 *usb3, + struct usb_ctrlrequest *ctrl) +{ + struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, 0); + u32 *data = (u32 *)ctrl; + + *data++ = usb3_read(usb3, USB3_STUP_DAT_0); + *data = usb3_read(usb3, USB3_STUP_DAT_1); + + /* update this driver's flag */ + usb3_ep->dir_in = !!(ctrl->bRequestType & USB_DIR_IN); +} + +static void usb3_set_p0_con_update_res(struct renesas_usb3 *usb3, u32 res) +{ + u32 val = usb3_read(usb3, USB3_P0_CON); + + val &= ~(P0_CON_ST_RES_MASK | P0_CON_OT_RES_MASK | P0_CON_IN_RES_MASK); + val |= res | P0_CON_RES_WEN; + usb3_write(usb3, val, USB3_P0_CON); +} + +static void usb3_set_p0_con_for_ctrl_read_data(struct renesas_usb3 *usb3) +{ + usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_FORCE_NRDY | + P0_CON_OT_RES_FORCE_STALL | + P0_CON_IN_RES_NORMAL); +} + +static void usb3_set_p0_con_for_ctrl_read_status(struct renesas_usb3 *usb3) +{ + usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_NORMAL | + P0_CON_OT_RES_FORCE_STALL | + P0_CON_IN_RES_NORMAL); +} + +static void usb3_set_p0_con_for_ctrl_write_data(struct renesas_usb3 *usb3) +{ + usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_FORCE_NRDY | + P0_CON_OT_RES_NORMAL | + P0_CON_IN_RES_FORCE_STALL); +} + +static void usb3_set_p0_con_for_ctrl_write_status(struct renesas_usb3 *usb3) +{ + usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_NORMAL | + P0_CON_OT_RES_NORMAL | + P0_CON_IN_RES_FORCE_STALL); +} + +static void usb3_set_p0_con_for_no_data(struct renesas_usb3 *usb3) +{ + usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_NORMAL | + P0_CON_OT_RES_FORCE_STALL | + P0_CON_IN_RES_FORCE_STALL); +} + +static void usb3_set_p0_con_stall(struct renesas_usb3 *usb3) +{ + usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_FORCE_STALL | + P0_CON_OT_RES_FORCE_STALL | + P0_CON_IN_RES_FORCE_STALL); +} + +static void usb3_set_p0_con_stop(struct renesas_usb3 *usb3) +{ + usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_FORCE_NRDY | + P0_CON_OT_RES_FORCE_NRDY | + P0_CON_IN_RES_FORCE_NRDY); +} + +static int usb3_pn_change(struct renesas_usb3 *usb3, int num) +{ + if (num == 0 || num > usb3->num_usb3_eps) + return -ENXIO; + + usb3_write(usb3, num, USB3_PIPE_COM); + + return 0; +} + +static void usb3_set_pn_con_update_res(struct renesas_usb3 *usb3, u32 res) +{ + u32 val = usb3_read(usb3, USB3_PN_CON); + + val &= ~PN_CON_RES_MASK; + val |= res & PN_CON_RES_MASK; + val |= PN_CON_RES_WEN; + usb3_write(usb3, val, USB3_PN_CON); +} + +static void usb3_pn_start(struct renesas_usb3 *usb3) +{ + usb3_set_pn_con_update_res(usb3, PN_CON_RES_NORMAL); +} + +static void usb3_pn_stop(struct renesas_usb3 *usb3) +{ + usb3_set_pn_con_update_res(usb3, PN_CON_RES_FORCE_NRDY); +} + +static void usb3_pn_stall(struct renesas_usb3 *usb3) +{ + usb3_set_pn_con_update_res(usb3, PN_CON_RES_FORCE_STALL); +} + +static int usb3_pn_con_clear(struct renesas_usb3 *usb3) +{ + usb3_set_bit(usb3, PN_CON_CLR, USB3_PN_CON); + + return usb3_wait(usb3, USB3_PN_CON, PN_CON_CLR, 0); +} + +static bool usb3_is_transfer_complete(struct renesas_usb3_ep *usb3_ep, + struct renesas_usb3_request *usb3_req) +{ + struct usb_request *req = &usb3_req->req; + + if ((!req->zero && req->actual == req->length) || + (req->actual % usb3_ep->ep.maxpacket) || (req->length == 0)) + return true; + else + return false; +} + +static int usb3_wait_pipe_status(struct renesas_usb3_ep *usb3_ep, u32 mask) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + u32 sta_reg = usb3_ep->num ? USB3_PN_STA : USB3_P0_STA; + + return usb3_wait(usb3, sta_reg, mask, mask); +} + +static void usb3_set_px_con_send(struct renesas_usb3_ep *usb3_ep, int bytes, + bool last) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + u32 con_reg = usb3_ep->num ? USB3_PN_CON : USB3_P0_CON; + u32 val = usb3_read(usb3, con_reg); + + val |= PX_CON_SEND | PX_CON_BYTE_EN_BYTES(bytes); + val |= (usb3_ep->num && last) ? PN_CON_LAST : 0; + usb3_write(usb3, val, con_reg); +} + +static int usb3_write_pipe(struct renesas_usb3_ep *usb3_ep, + struct renesas_usb3_request *usb3_req, + u32 fifo_reg) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + int i; + int len = min_t(unsigned, usb3_req->req.length - usb3_req->req.actual, + usb3_ep->ep.maxpacket); + u8 *buf = usb3_req->req.buf + usb3_req->req.actual; + u32 tmp = 0; + bool is_last = !len ? true : false; + + if (usb3_wait_pipe_status(usb3_ep, PX_STA_BUFSTS) < 0) + return -EBUSY; + + /* Update gadget driver parameter */ + usb3_req->req.actual += len; + + /* Write data to the register */ + if (len >= 4) { + iowrite32_rep(usb3->reg + fifo_reg, buf, len / 4); + buf += (len / 4) * 4; + len %= 4; /* update len to use usb3_set_pX_con_send() */ + } + + if (len) { + for (i = 0; i < len; i++) + tmp |= buf[i] << (8 * i); + usb3_write(usb3, tmp, fifo_reg); + } + + if (!is_last) + is_last = usb3_is_transfer_complete(usb3_ep, usb3_req); + /* Send the data */ + usb3_set_px_con_send(usb3_ep, len, is_last); + + return is_last ? 0 : -EAGAIN; +} + +static u32 usb3_get_received_length(struct renesas_usb3_ep *usb3_ep) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + u32 lng_reg = usb3_ep->num ? USB3_PN_LNG : USB3_P0_LNG; + + return usb3_read(usb3, lng_reg); +} + +static int usb3_read_pipe(struct renesas_usb3_ep *usb3_ep, + struct renesas_usb3_request *usb3_req, u32 fifo_reg) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + int i; + int len = min_t(unsigned, usb3_req->req.length - usb3_req->req.actual, + usb3_get_received_length(usb3_ep)); + u8 *buf = usb3_req->req.buf + usb3_req->req.actual; + u32 tmp = 0; + + if (!len) + return 0; + + /* Update gadget driver parameter */ + usb3_req->req.actual += len; + + /* Read data from the register */ + if (len >= 4) { + ioread32_rep(usb3->reg + fifo_reg, buf, len / 4); + buf += (len / 4) * 4; + len %= 4; + } + + if (len) { + tmp = usb3_read(usb3, fifo_reg); + for (i = 0; i < len; i++) + buf[i] = (tmp >> (8 * i)) & 0xff; + } + + return usb3_is_transfer_complete(usb3_ep, usb3_req) ? 0 : -EAGAIN; +} + +static void usb3_set_status_stage(struct renesas_usb3_ep *usb3_ep, + struct renesas_usb3_request *usb3_req) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + + if (usb3_ep->dir_in) { + usb3_set_p0_con_for_ctrl_read_status(usb3); + } else { + if (!usb3_req->req.length) + usb3_set_p0_con_for_no_data(usb3); + else + usb3_set_p0_con_for_ctrl_write_status(usb3); + } +} + +static void usb3_p0_xfer(struct renesas_usb3_ep *usb3_ep, + struct renesas_usb3_request *usb3_req) +{ + int ret; + + if (usb3_ep->dir_in) + ret = usb3_write_pipe(usb3_ep, usb3_req, USB3_P0_WRITE); + else + ret = usb3_read_pipe(usb3_ep, usb3_req, USB3_P0_READ); + + if (!ret) + usb3_set_status_stage(usb3_ep, usb3_req); +} + +static void usb3_start_pipe0(struct renesas_usb3_ep *usb3_ep, + struct renesas_usb3_request *usb3_req) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + + if (usb3_ep->started) + return; + + usb3_ep->started = true; + + if (usb3_ep->dir_in) { + usb3_set_bit(usb3, P0_MOD_DIR, USB3_P0_MOD); + usb3_set_p0_con_for_ctrl_read_data(usb3); + } else { + usb3_clear_bit(usb3, P0_MOD_DIR, USB3_P0_MOD); + if (usb3_req->req.length) + usb3_set_p0_con_for_ctrl_write_data(usb3); + } + + usb3_p0_xfer(usb3_ep, usb3_req); +} + +static void usb3_enable_dma_pipen(struct renesas_usb3 *usb3) +{ + usb3_set_bit(usb3, PN_CON_DATAIF_EN, USB3_PN_CON); +} + +static void usb3_disable_dma_pipen(struct renesas_usb3 *usb3) +{ + usb3_clear_bit(usb3, PN_CON_DATAIF_EN, USB3_PN_CON); +} + +static void usb3_enable_dma_irq(struct renesas_usb3 *usb3, int num) +{ + usb3_set_bit(usb3, DMA_INT(num), USB3_DMA_INT_ENA); +} + +static void usb3_disable_dma_irq(struct renesas_usb3 *usb3, int num) +{ + usb3_clear_bit(usb3, DMA_INT(num), USB3_DMA_INT_ENA); +} + +static u32 usb3_dma_mps_to_prd_word1(struct renesas_usb3_ep *usb3_ep) +{ + switch (usb3_ep->ep.maxpacket) { + case 8: + return USB3_PRD1_MPS_8; + case 16: + return USB3_PRD1_MPS_16; + case 32: + return USB3_PRD1_MPS_32; + case 64: + return USB3_PRD1_MPS_64; + case 512: + return USB3_PRD1_MPS_512; + case 1024: + return USB3_PRD1_MPS_1024; + default: + return USB3_PRD1_MPS_RESERVED; + } +} + +static bool usb3_dma_get_setting_area(struct renesas_usb3_ep *usb3_ep, + struct renesas_usb3_request *usb3_req) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + struct renesas_usb3_dma *dma; + int i; + bool ret = false; + + if (usb3_req->req.length > USB3_DMA_MAX_XFER_SIZE_ALL_PRDS) { + dev_dbg(usb3_to_dev(usb3), "%s: the length is too big (%d)\n", + __func__, usb3_req->req.length); + return false; + } + + /* The driver doesn't handle zero-length packet via dmac */ + if (!usb3_req->req.length) + return false; + + if (usb3_dma_mps_to_prd_word1(usb3_ep) == USB3_PRD1_MPS_RESERVED) + return false; + + usb3_for_each_dma(usb3, dma, i) { + if (dma->used) + continue; + + if (usb_gadget_map_request(&usb3->gadget, &usb3_req->req, + usb3_ep->dir_in) < 0) + break; + + dma->used = true; + usb3_ep->dma = dma; + ret = true; + break; + } + + return ret; +} + +static void usb3_dma_put_setting_area(struct renesas_usb3_ep *usb3_ep, + struct renesas_usb3_request *usb3_req) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + int i; + struct renesas_usb3_dma *dma; + + usb3_for_each_dma(usb3, dma, i) { + if (usb3_ep->dma == dma) { + usb_gadget_unmap_request(&usb3->gadget, &usb3_req->req, + usb3_ep->dir_in); + dma->used = false; + usb3_ep->dma = NULL; + break; + } + } +} + +static void usb3_dma_fill_prd(struct renesas_usb3_ep *usb3_ep, + struct renesas_usb3_request *usb3_req) +{ + struct renesas_usb3_prd *cur_prd = usb3_ep->dma->prd; + u32 remain = usb3_req->req.length; + u32 dma = usb3_req->req.dma; + u32 len; + int i = 0; + + do { + len = min_t(u32, remain, USB3_DMA_MAX_XFER_SIZE) & + USB3_PRD1_SIZE_MASK; + cur_prd->word1 = usb3_dma_mps_to_prd_word1(usb3_ep) | + USB3_PRD1_B_INC | len; + cur_prd->bap = dma; + remain -= len; + dma += len; + if (!remain || (i + 1) < USB3_DMA_NUM_PRD_ENTRIES) + break; + + cur_prd++; + i++; + } while (1); + + cur_prd->word1 |= USB3_PRD1_E | USB3_PRD1_INT; + if (usb3_ep->dir_in) + cur_prd->word1 |= USB3_PRD1_LST; +} + +static void usb3_dma_kick_prd(struct renesas_usb3_ep *usb3_ep) +{ + struct renesas_usb3_dma *dma = usb3_ep->dma; + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + u32 dma_con = DMA_COM_PIPE_NO(usb3_ep->num) | DMA_CON_PRD_EN; + + if (usb3_ep->dir_in) + dma_con |= DMA_CON_PIPE_DIR; + + wmb(); /* prd entries should be in system memory here */ + + usb3_write(usb3, 1 << usb3_ep->num, USB3_DMA_INT_STA); + usb3_write(usb3, AXI_INT_PRDEN_CLR_STA(dma->num) | + AXI_INT_PRDERR_STA(dma->num), USB3_AXI_INT_STA); + + usb3_write(usb3, dma->prd_dma, USB3_DMA_CH0_PRD_ADR(dma->num)); + usb3_write(usb3, dma_con, USB3_DMA_CH0_CON(dma->num)); + usb3_enable_dma_irq(usb3, usb3_ep->num); +} + +static void usb3_dma_stop_prd(struct renesas_usb3_ep *usb3_ep) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + struct renesas_usb3_dma *dma = usb3_ep->dma; + + usb3_disable_dma_irq(usb3, usb3_ep->num); + usb3_write(usb3, 0, USB3_DMA_CH0_CON(dma->num)); +} + +static int usb3_dma_update_status(struct renesas_usb3_ep *usb3_ep, + struct renesas_usb3_request *usb3_req) +{ + struct renesas_usb3_prd *cur_prd = usb3_ep->dma->prd; + struct usb_request *req = &usb3_req->req; + u32 remain, len; + int i = 0; + int status = 0; + + rmb(); /* The controller updated prd entries */ + + do { + if (cur_prd->word1 & USB3_PRD1_D) + status = -EIO; + if (cur_prd->word1 & USB3_PRD1_E) + len = req->length % USB3_DMA_MAX_XFER_SIZE; + else + len = USB3_DMA_MAX_XFER_SIZE; + remain = cur_prd->word1 & USB3_PRD1_SIZE_MASK; + req->actual += len - remain; + + if (cur_prd->word1 & USB3_PRD1_E || + (i + 1) < USB3_DMA_NUM_PRD_ENTRIES) + break; + + cur_prd++; + i++; + } while (1); + + return status; +} + +static bool usb3_dma_try_start(struct renesas_usb3_ep *usb3_ep, + struct renesas_usb3_request *usb3_req) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + + if (!use_dma) + return false; + + if (usb3_dma_get_setting_area(usb3_ep, usb3_req)) { + usb3_pn_stop(usb3); + usb3_enable_dma_pipen(usb3); + usb3_dma_fill_prd(usb3_ep, usb3_req); + usb3_dma_kick_prd(usb3_ep); + usb3_pn_start(usb3); + return true; + } + + return false; +} + +static int usb3_dma_try_stop(struct renesas_usb3_ep *usb3_ep, + struct renesas_usb3_request *usb3_req) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + unsigned long flags; + int status = 0; + + spin_lock_irqsave(&usb3->lock, flags); + if (!usb3_ep->dma) + goto out; + + if (!usb3_pn_change(usb3, usb3_ep->num)) + usb3_disable_dma_pipen(usb3); + usb3_dma_stop_prd(usb3_ep); + status = usb3_dma_update_status(usb3_ep, usb3_req); + usb3_dma_put_setting_area(usb3_ep, usb3_req); + +out: + spin_unlock_irqrestore(&usb3->lock, flags); + return status; +} + +static int renesas_usb3_dma_free_prd(struct renesas_usb3 *usb3, + struct device *dev) +{ + int i; + struct renesas_usb3_dma *dma; + + usb3_for_each_dma(usb3, dma, i) { + if (dma->prd) { + dma_free_coherent(dev, USB3_DMA_PRD_SIZE, + dma->prd, dma->prd_dma); + dma->prd = NULL; + } + } + + return 0; +} + +static int renesas_usb3_dma_alloc_prd(struct renesas_usb3 *usb3, + struct device *dev) +{ + int i; + struct renesas_usb3_dma *dma; + + if (!use_dma) + return 0; + + usb3_for_each_dma(usb3, dma, i) { + dma->prd = dma_alloc_coherent(dev, USB3_DMA_PRD_SIZE, + &dma->prd_dma, GFP_KERNEL); + if (!dma->prd) { + renesas_usb3_dma_free_prd(usb3, dev); + return -ENOMEM; + } + dma->num = i + 1; + } + + return 0; +} + +static void usb3_start_pipen(struct renesas_usb3_ep *usb3_ep, + struct renesas_usb3_request *usb3_req) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + struct renesas_usb3_request *usb3_req_first; + unsigned long flags; + int ret = -EAGAIN; + u32 enable_bits = 0; + + spin_lock_irqsave(&usb3->lock, flags); + if (usb3_ep->halt || usb3_ep->started) + goto out; + usb3_req_first = __usb3_get_request(usb3_ep); + if (!usb3_req_first || usb3_req != usb3_req_first) + goto out; + + if (usb3_pn_change(usb3, usb3_ep->num) < 0) + goto out; + + usb3_ep->started = true; + + if (usb3_dma_try_start(usb3_ep, usb3_req)) + goto out; + + usb3_pn_start(usb3); + + if (usb3_ep->dir_in) { + ret = usb3_write_pipe(usb3_ep, usb3_req, USB3_PN_WRITE); + enable_bits |= PN_INT_LSTTR; + } + + if (ret < 0) + enable_bits |= PN_INT_BFRDY; + + if (enable_bits) { + usb3_set_bit(usb3, enable_bits, USB3_PN_INT_ENA); + usb3_enable_pipe_irq(usb3, usb3_ep->num); + } +out: + spin_unlock_irqrestore(&usb3->lock, flags); +} + +static int renesas_usb3_ep_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t gfp_flags) +{ + struct renesas_usb3_ep *usb3_ep = usb_ep_to_usb3_ep(_ep); + struct renesas_usb3_request *usb3_req = usb_req_to_usb3_req(_req); + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + unsigned long flags; + + dev_dbg(usb3_to_dev(usb3), "ep_queue: ep%2d, %u\n", usb3_ep->num, + _req->length); + + _req->status = -EINPROGRESS; + _req->actual = 0; + spin_lock_irqsave(&usb3->lock, flags); + list_add_tail(&usb3_req->queue, &usb3_ep->queue); + spin_unlock_irqrestore(&usb3->lock, flags); + + if (!usb3_ep->num) + usb3_start_pipe0(usb3_ep, usb3_req); + else + usb3_start_pipen(usb3_ep, usb3_req); + + return 0; +} + +static void usb3_set_device_address(struct renesas_usb3 *usb3, u16 addr) +{ + /* DEV_ADDR bit field is cleared by WarmReset, HotReset and BusReset */ + usb3_set_bit(usb3, USB_COM_CON_DEV_ADDR(addr), USB3_USB_COM_CON); +} + +static bool usb3_std_req_set_address(struct renesas_usb3 *usb3, + struct usb_ctrlrequest *ctrl) +{ + if (le16_to_cpu(ctrl->wValue) >= 128) + return true; /* stall */ + + usb3_set_device_address(usb3, le16_to_cpu(ctrl->wValue)); + usb3_set_p0_con_for_no_data(usb3); + + return false; +} + +static void usb3_pipe0_internal_xfer(struct renesas_usb3 *usb3, + void *tx_data, size_t len, + void (*complete)(struct usb_ep *ep, + struct usb_request *req)) +{ + struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, 0); + + if (tx_data) + memcpy(usb3->ep0_buf, tx_data, + min_t(size_t, len, USB3_EP0_BUF_SIZE)); + + usb3->ep0_req->buf = &usb3->ep0_buf; + usb3->ep0_req->length = len; + usb3->ep0_req->complete = complete; + renesas_usb3_ep_queue(&usb3_ep->ep, usb3->ep0_req, GFP_ATOMIC); +} + +static void usb3_pipe0_get_status_completion(struct usb_ep *ep, + struct usb_request *req) +{ +} + +static bool usb3_std_req_get_status(struct renesas_usb3 *usb3, + struct usb_ctrlrequest *ctrl) +{ + bool stall = false; + struct renesas_usb3_ep *usb3_ep; + int num; + u16 status = 0; + __le16 tx_data; + + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + if (usb3->gadget.is_selfpowered) + status |= 1 << USB_DEVICE_SELF_POWERED; + if (usb3->gadget.speed == USB_SPEED_SUPER) + status |= usb3_feature_get_un_enabled(usb3); + break; + case USB_RECIP_INTERFACE: + break; + case USB_RECIP_ENDPOINT: + num = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK; + usb3_ep = usb3_get_ep(usb3, num); + if (usb3_ep->halt) + status |= 1 << USB_ENDPOINT_HALT; + break; + default: + stall = true; + break; + } + + if (!stall) { + tx_data = cpu_to_le16(status); + dev_dbg(usb3_to_dev(usb3), "get_status: req = %p\n", + usb_req_to_usb3_req(usb3->ep0_req)); + usb3_pipe0_internal_xfer(usb3, &tx_data, sizeof(tx_data), + usb3_pipe0_get_status_completion); + } + + return stall; +} + +static bool usb3_std_req_feature_device(struct renesas_usb3 *usb3, + struct usb_ctrlrequest *ctrl, bool set) +{ + bool stall = true; + u16 w_value = le16_to_cpu(ctrl->wValue); + + switch (w_value) { + case USB_DEVICE_TEST_MODE: + if (!set) + break; + usb3->test_mode = le16_to_cpu(ctrl->wIndex) >> 8; + stall = false; + break; + case USB_DEVICE_U1_ENABLE: + case USB_DEVICE_U2_ENABLE: + if (usb3->gadget.speed != USB_SPEED_SUPER) + break; + if (w_value == USB_DEVICE_U1_ENABLE) + usb3_feature_u1_enable(usb3, set); + if (w_value == USB_DEVICE_U2_ENABLE) + usb3_feature_u2_enable(usb3, set); + stall = false; + break; + default: + break; + } + + return stall; +} + +static int usb3_set_halt_p0(struct renesas_usb3_ep *usb3_ep, bool halt) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + + if (unlikely(usb3_ep->num)) + return -EINVAL; + + usb3_ep->halt = halt; + if (halt) + usb3_set_p0_con_stall(usb3); + else + usb3_set_p0_con_stop(usb3); + + return 0; +} + +static int usb3_set_halt_pn(struct renesas_usb3_ep *usb3_ep, bool halt, + bool is_clear_feature) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + unsigned long flags; + + spin_lock_irqsave(&usb3->lock, flags); + if (!usb3_pn_change(usb3, usb3_ep->num)) { + usb3_ep->halt = halt; + if (halt) { + usb3_pn_stall(usb3); + } else if (!is_clear_feature || !usb3_ep->wedge) { + usb3_pn_con_clear(usb3); + usb3_set_bit(usb3, PN_CON_EN, USB3_PN_CON); + usb3_pn_stop(usb3); + } + } + spin_unlock_irqrestore(&usb3->lock, flags); + + return 0; +} + +static int usb3_set_halt(struct renesas_usb3_ep *usb3_ep, bool halt, + bool is_clear_feature) +{ + int ret = 0; + + if (halt && usb3_ep->started) + return -EAGAIN; + + if (usb3_ep->num) + ret = usb3_set_halt_pn(usb3_ep, halt, is_clear_feature); + else + ret = usb3_set_halt_p0(usb3_ep, halt); + + return ret; +} + +static bool usb3_std_req_feature_endpoint(struct renesas_usb3 *usb3, + struct usb_ctrlrequest *ctrl, + bool set) +{ + int num = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK; + struct renesas_usb3_ep *usb3_ep; + struct renesas_usb3_request *usb3_req; + + if (le16_to_cpu(ctrl->wValue) != USB_ENDPOINT_HALT) + return true; /* stall */ + + usb3_ep = usb3_get_ep(usb3, num); + usb3_set_halt(usb3_ep, set, true); + + /* Restarts a queue if clear feature */ + if (!set) { + usb3_ep->started = false; + usb3_req = usb3_get_request(usb3_ep); + if (usb3_req) + usb3_start_pipen(usb3_ep, usb3_req); + } + + return false; +} + +static bool usb3_std_req_feature(struct renesas_usb3 *usb3, + struct usb_ctrlrequest *ctrl, bool set) +{ + bool stall = false; + + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + stall = usb3_std_req_feature_device(usb3, ctrl, set); + break; + case USB_RECIP_INTERFACE: + break; + case USB_RECIP_ENDPOINT: + stall = usb3_std_req_feature_endpoint(usb3, ctrl, set); + break; + default: + stall = true; + break; + } + + if (!stall) + usb3_set_p0_con_for_no_data(usb3); + + return stall; +} + +static void usb3_pipe0_set_sel_completion(struct usb_ep *ep, + struct usb_request *req) +{ + /* TODO */ +} + +static bool usb3_std_req_set_sel(struct renesas_usb3 *usb3, + struct usb_ctrlrequest *ctrl) +{ + u16 w_length = le16_to_cpu(ctrl->wLength); + + if (w_length != 6) + return true; /* stall */ + + dev_dbg(usb3_to_dev(usb3), "set_sel: req = %p\n", + usb_req_to_usb3_req(usb3->ep0_req)); + usb3_pipe0_internal_xfer(usb3, NULL, 6, usb3_pipe0_set_sel_completion); + + return false; +} + +static bool usb3_std_req_set_configuration(struct renesas_usb3 *usb3, + struct usb_ctrlrequest *ctrl) +{ + if (le16_to_cpu(ctrl->wValue) > 0) + usb3_set_bit(usb3, USB_COM_CON_CONF, USB3_USB_COM_CON); + else + usb3_clear_bit(usb3, USB_COM_CON_CONF, USB3_USB_COM_CON); + + return false; +} + +/** + * usb3_handle_standard_request - handle some standard requests + * @usb3: the renesas_usb3 pointer + * @ctrl: a pointer of setup data + * + * Returns true if this function handled a standard request + */ +static bool usb3_handle_standard_request(struct renesas_usb3 *usb3, + struct usb_ctrlrequest *ctrl) +{ + bool ret = false; + bool stall = false; + + if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { + switch (ctrl->bRequest) { + case USB_REQ_SET_ADDRESS: + stall = usb3_std_req_set_address(usb3, ctrl); + ret = true; + break; + case USB_REQ_GET_STATUS: + stall = usb3_std_req_get_status(usb3, ctrl); + ret = true; + break; + case USB_REQ_CLEAR_FEATURE: + stall = usb3_std_req_feature(usb3, ctrl, false); + ret = true; + break; + case USB_REQ_SET_FEATURE: + stall = usb3_std_req_feature(usb3, ctrl, true); + ret = true; + break; + case USB_REQ_SET_SEL: + stall = usb3_std_req_set_sel(usb3, ctrl); + ret = true; + break; + case USB_REQ_SET_ISOCH_DELAY: + /* This hardware doesn't support Isochronous xfer */ + stall = true; + ret = true; + break; + case USB_REQ_SET_CONFIGURATION: + usb3_std_req_set_configuration(usb3, ctrl); + break; + default: + break; + } + } + + if (stall) + usb3_set_p0_con_stall(usb3); + + return ret; +} + +static int usb3_p0_con_clear_buffer(struct renesas_usb3 *usb3) +{ + usb3_set_bit(usb3, P0_CON_BCLR, USB3_P0_CON); + + return usb3_wait(usb3, USB3_P0_CON, P0_CON_BCLR, 0); +} + +static void usb3_irq_epc_pipe0_setup(struct renesas_usb3 *usb3) +{ + struct usb_ctrlrequest ctrl; + struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, 0); + + /* Call giveback function if previous transfer is not completed */ + if (usb3_ep->started) + usb3_request_done(usb3_ep, usb3_get_request(usb3_ep), + -ECONNRESET); + + usb3_p0_con_clear_buffer(usb3); + usb3_get_setup_data(usb3, &ctrl); + if (!usb3_handle_standard_request(usb3, &ctrl)) + if (usb3->driver->setup(&usb3->gadget, &ctrl) < 0) + usb3_set_p0_con_stall(usb3); +} + +static void usb3_irq_epc_pipe0_bfrdy(struct renesas_usb3 *usb3) +{ + struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, 0); + struct renesas_usb3_request *usb3_req = usb3_get_request(usb3_ep); + + if (!usb3_req) + return; + + usb3_p0_xfer(usb3_ep, usb3_req); +} + +static void usb3_irq_epc_pipe0(struct renesas_usb3 *usb3) +{ + u32 p0_int_sta = usb3_read(usb3, USB3_P0_INT_STA); + + p0_int_sta &= usb3_read(usb3, USB3_P0_INT_ENA); + usb3_write(usb3, p0_int_sta, USB3_P0_INT_STA); + if (p0_int_sta & P0_INT_STSED) + usb3_irq_epc_pipe0_status_end(usb3); + if (p0_int_sta & P0_INT_SETUP) + usb3_irq_epc_pipe0_setup(usb3); + if (p0_int_sta & P0_INT_BFRDY) + usb3_irq_epc_pipe0_bfrdy(usb3); +} + +static void usb3_request_done_pipen(struct renesas_usb3 *usb3, + struct renesas_usb3_ep *usb3_ep, + struct renesas_usb3_request *usb3_req, + int status) +{ + unsigned long flags; + + spin_lock_irqsave(&usb3->lock, flags); + if (usb3_pn_change(usb3, usb3_ep->num)) + usb3_pn_stop(usb3); + spin_unlock_irqrestore(&usb3->lock, flags); + + usb3_disable_pipe_irq(usb3, usb3_ep->num); + usb3_request_done(usb3_ep, usb3_req, status); + + /* get next usb3_req */ + usb3_req = usb3_get_request(usb3_ep); + if (usb3_req) + usb3_start_pipen(usb3_ep, usb3_req); +} + +static void usb3_irq_epc_pipen_lsttr(struct renesas_usb3 *usb3, int num) +{ + struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, num); + struct renesas_usb3_request *usb3_req = usb3_get_request(usb3_ep); + + if (!usb3_req) + return; + + if (usb3_ep->dir_in) { + dev_dbg(usb3_to_dev(usb3), "%s: len = %u, actual = %u\n", + __func__, usb3_req->req.length, usb3_req->req.actual); + usb3_request_done_pipen(usb3, usb3_ep, usb3_req, 0); + } +} + +static void usb3_irq_epc_pipen_bfrdy(struct renesas_usb3 *usb3, int num) +{ + struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, num); + struct renesas_usb3_request *usb3_req = usb3_get_request(usb3_ep); + bool done = false; + + if (!usb3_req) + return; + + spin_lock(&usb3->lock); + if (usb3_pn_change(usb3, num)) + goto out; + + if (usb3_ep->dir_in) { + /* Do not stop the IN pipe here to detect LSTTR interrupt */ + if (!usb3_write_pipe(usb3_ep, usb3_req, USB3_PN_WRITE)) + usb3_clear_bit(usb3, PN_INT_BFRDY, USB3_PN_INT_ENA); + } else { + if (!usb3_read_pipe(usb3_ep, usb3_req, USB3_PN_READ)) + done = true; + } + +out: + /* need to unlock because usb3_request_done_pipen() locks it */ + spin_unlock(&usb3->lock); + + if (done) + usb3_request_done_pipen(usb3, usb3_ep, usb3_req, 0); +} + +static void usb3_irq_epc_pipen(struct renesas_usb3 *usb3, int num) +{ + u32 pn_int_sta; + + spin_lock(&usb3->lock); + if (usb3_pn_change(usb3, num) < 0) { + spin_unlock(&usb3->lock); + return; + } + + pn_int_sta = usb3_read(usb3, USB3_PN_INT_STA); + pn_int_sta &= usb3_read(usb3, USB3_PN_INT_ENA); + usb3_write(usb3, pn_int_sta, USB3_PN_INT_STA); + spin_unlock(&usb3->lock); + if (pn_int_sta & PN_INT_LSTTR) + usb3_irq_epc_pipen_lsttr(usb3, num); + if (pn_int_sta & PN_INT_BFRDY) + usb3_irq_epc_pipen_bfrdy(usb3, num); +} + +static void usb3_irq_epc_int_2(struct renesas_usb3 *usb3, u32 int_sta_2) +{ + int i; + + for (i = 0; i < usb3->num_usb3_eps; i++) { + if (int_sta_2 & USB_INT_2_PIPE(i)) { + if (!i) + usb3_irq_epc_pipe0(usb3); + else + usb3_irq_epc_pipen(usb3, i); + } + } +} + +static void usb3_irq_idmon_change(struct renesas_usb3 *usb3) +{ + usb3_check_id(usb3); +} + +static void usb3_irq_otg_int(struct renesas_usb3 *usb3) +{ + u32 otg_int_sta = usb3_read(usb3, USB3_USB_OTG_INT_STA(usb3)); + + otg_int_sta &= usb3_read(usb3, USB3_USB_OTG_INT_ENA(usb3)); + if (otg_int_sta) + usb3_write(usb3, otg_int_sta, USB3_USB_OTG_INT_STA(usb3)); + + if (otg_int_sta & USB_OTG_IDMON(usb3)) + usb3_irq_idmon_change(usb3); +} + +static void usb3_irq_epc(struct renesas_usb3 *usb3) +{ + u32 int_sta_1 = usb3_read(usb3, USB3_USB_INT_STA_1); + u32 int_sta_2 = usb3_read(usb3, USB3_USB_INT_STA_2); + + int_sta_1 &= usb3_read(usb3, USB3_USB_INT_ENA_1); + if (int_sta_1) { + usb3_write(usb3, int_sta_1, USB3_USB_INT_STA_1); + usb3_irq_epc_int_1(usb3, int_sta_1); + } + + int_sta_2 &= usb3_read(usb3, USB3_USB_INT_ENA_2); + if (int_sta_2) + usb3_irq_epc_int_2(usb3, int_sta_2); + + if (!usb3->is_rzv2m) + usb3_irq_otg_int(usb3); +} + +static void usb3_irq_dma_int(struct renesas_usb3 *usb3, u32 dma_sta) +{ + struct renesas_usb3_ep *usb3_ep; + struct renesas_usb3_request *usb3_req; + int i, status; + + for (i = 0; i < usb3->num_usb3_eps; i++) { + if (!(dma_sta & DMA_INT(i))) + continue; + + usb3_ep = usb3_get_ep(usb3, i); + if (!(usb3_read(usb3, USB3_AXI_INT_STA) & + AXI_INT_PRDEN_CLR_STA(usb3_ep->dma->num))) + continue; + + usb3_req = usb3_get_request(usb3_ep); + status = usb3_dma_try_stop(usb3_ep, usb3_req); + usb3_request_done_pipen(usb3, usb3_ep, usb3_req, status); + } +} + +static void usb3_irq_dma(struct renesas_usb3 *usb3) +{ + u32 dma_sta = usb3_read(usb3, USB3_DMA_INT_STA); + + dma_sta &= usb3_read(usb3, USB3_DMA_INT_ENA); + if (dma_sta) { + usb3_write(usb3, dma_sta, USB3_DMA_INT_STA); + usb3_irq_dma_int(usb3, dma_sta); + } +} + +static irqreturn_t renesas_usb3_irq(int irq, void *_usb3) +{ + struct renesas_usb3 *usb3 = _usb3; + irqreturn_t ret = IRQ_NONE; + u32 axi_int_sta = usb3_read(usb3, USB3_AXI_INT_STA); + + if (axi_int_sta & AXI_INT_DMAINT) { + usb3_irq_dma(usb3); + ret = IRQ_HANDLED; + } + + if (axi_int_sta & AXI_INT_EPCINT) { + usb3_irq_epc(usb3); + ret = IRQ_HANDLED; + } + + return ret; +} + +static irqreturn_t renesas_usb3_otg_irq(int irq, void *_usb3) +{ + struct renesas_usb3 *usb3 = _usb3; + + usb3_irq_otg_int(usb3); + + return IRQ_HANDLED; +} + +static void usb3_write_pn_mod(struct renesas_usb3_ep *usb3_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + u32 val = 0; + + val |= usb3_ep->dir_in ? PN_MOD_DIR : 0; + val |= PN_MOD_TYPE(usb_endpoint_type(desc)); + val |= PN_MOD_EPNUM(usb_endpoint_num(desc)); + usb3_write(usb3, val, USB3_PN_MOD); +} + +static u32 usb3_calc_ramarea(int ram_size) +{ + WARN_ON(ram_size > SZ_16K); + + if (ram_size <= SZ_1K) + return PN_RAMMAP_RAMAREA_1KB; + else if (ram_size <= SZ_2K) + return PN_RAMMAP_RAMAREA_2KB; + else if (ram_size <= SZ_4K) + return PN_RAMMAP_RAMAREA_4KB; + else if (ram_size <= SZ_8K) + return PN_RAMMAP_RAMAREA_8KB; + else + return PN_RAMMAP_RAMAREA_16KB; +} + +static u32 usb3_calc_rammap_val(struct renesas_usb3_ep *usb3_ep, + const struct usb_endpoint_descriptor *desc) +{ + int i; + static const u32 max_packet_array[] = {8, 16, 32, 64, 512}; + u32 mpkt = PN_RAMMAP_MPKT(1024); + + for (i = 0; i < ARRAY_SIZE(max_packet_array); i++) { + if (usb_endpoint_maxp(desc) <= max_packet_array[i]) + mpkt = PN_RAMMAP_MPKT(max_packet_array[i]); + } + + return usb3_ep->rammap_val | mpkt; +} + +static int usb3_enable_pipe_n(struct renesas_usb3_ep *usb3_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + unsigned long flags; + + usb3_ep->dir_in = usb_endpoint_dir_in(desc); + + spin_lock_irqsave(&usb3->lock, flags); + if (!usb3_pn_change(usb3, usb3_ep->num)) { + usb3_write_pn_mod(usb3_ep, desc); + usb3_write(usb3, usb3_calc_rammap_val(usb3_ep, desc), + USB3_PN_RAMMAP); + usb3_pn_con_clear(usb3); + usb3_set_bit(usb3, PN_CON_EN, USB3_PN_CON); + } + spin_unlock_irqrestore(&usb3->lock, flags); + + return 0; +} + +static int usb3_disable_pipe_n(struct renesas_usb3_ep *usb3_ep) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + unsigned long flags; + + usb3_ep->halt = false; + + spin_lock_irqsave(&usb3->lock, flags); + if (!usb3_pn_change(usb3, usb3_ep->num)) { + usb3_write(usb3, 0, USB3_PN_INT_ENA); + usb3_write(usb3, 0, USB3_PN_RAMMAP); + usb3_clear_bit(usb3, PN_CON_EN, USB3_PN_CON); + } + spin_unlock_irqrestore(&usb3->lock, flags); + + return 0; +} + +/*------- usb_ep_ops -----------------------------------------------------*/ +static int renesas_usb3_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct renesas_usb3_ep *usb3_ep = usb_ep_to_usb3_ep(_ep); + + return usb3_enable_pipe_n(usb3_ep, desc); +} + +static int renesas_usb3_ep_disable(struct usb_ep *_ep) +{ + struct renesas_usb3_ep *usb3_ep = usb_ep_to_usb3_ep(_ep); + struct renesas_usb3_request *usb3_req; + + do { + usb3_req = usb3_get_request(usb3_ep); + if (!usb3_req) + break; + usb3_dma_try_stop(usb3_ep, usb3_req); + usb3_request_done(usb3_ep, usb3_req, -ESHUTDOWN); + } while (1); + + return usb3_disable_pipe_n(usb3_ep); +} + +static struct usb_request *__renesas_usb3_ep_alloc_request(gfp_t gfp_flags) +{ + struct renesas_usb3_request *usb3_req; + + usb3_req = kzalloc(sizeof(struct renesas_usb3_request), gfp_flags); + if (!usb3_req) + return NULL; + + INIT_LIST_HEAD(&usb3_req->queue); + + return &usb3_req->req; +} + +static void __renesas_usb3_ep_free_request(struct usb_request *_req) +{ + struct renesas_usb3_request *usb3_req = usb_req_to_usb3_req(_req); + + kfree(usb3_req); +} + +static struct usb_request *renesas_usb3_ep_alloc_request(struct usb_ep *_ep, + gfp_t gfp_flags) +{ + return __renesas_usb3_ep_alloc_request(gfp_flags); +} + +static void renesas_usb3_ep_free_request(struct usb_ep *_ep, + struct usb_request *_req) +{ + __renesas_usb3_ep_free_request(_req); +} + +static int renesas_usb3_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct renesas_usb3_ep *usb3_ep = usb_ep_to_usb3_ep(_ep); + struct renesas_usb3_request *usb3_req = usb_req_to_usb3_req(_req); + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + + dev_dbg(usb3_to_dev(usb3), "ep_dequeue: ep%2d, %u\n", usb3_ep->num, + _req->length); + + usb3_dma_try_stop(usb3_ep, usb3_req); + usb3_request_done_pipen(usb3, usb3_ep, usb3_req, -ECONNRESET); + + return 0; +} + +static int renesas_usb3_ep_set_halt(struct usb_ep *_ep, int value) +{ + return usb3_set_halt(usb_ep_to_usb3_ep(_ep), !!value, false); +} + +static int renesas_usb3_ep_set_wedge(struct usb_ep *_ep) +{ + struct renesas_usb3_ep *usb3_ep = usb_ep_to_usb3_ep(_ep); + + usb3_ep->wedge = true; + return usb3_set_halt(usb3_ep, true, false); +} + +static void renesas_usb3_ep_fifo_flush(struct usb_ep *_ep) +{ + struct renesas_usb3_ep *usb3_ep = usb_ep_to_usb3_ep(_ep); + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + unsigned long flags; + + if (usb3_ep->num) { + spin_lock_irqsave(&usb3->lock, flags); + if (!usb3_pn_change(usb3, usb3_ep->num)) { + usb3_pn_con_clear(usb3); + usb3_set_bit(usb3, PN_CON_EN, USB3_PN_CON); + } + spin_unlock_irqrestore(&usb3->lock, flags); + } else { + usb3_p0_con_clear_buffer(usb3); + } +} + +static const struct usb_ep_ops renesas_usb3_ep_ops = { + .enable = renesas_usb3_ep_enable, + .disable = renesas_usb3_ep_disable, + + .alloc_request = renesas_usb3_ep_alloc_request, + .free_request = renesas_usb3_ep_free_request, + + .queue = renesas_usb3_ep_queue, + .dequeue = renesas_usb3_ep_dequeue, + + .set_halt = renesas_usb3_ep_set_halt, + .set_wedge = renesas_usb3_ep_set_wedge, + .fifo_flush = renesas_usb3_ep_fifo_flush, +}; + +/*------- usb_gadget_ops -------------------------------------------------*/ +static int renesas_usb3_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct renesas_usb3 *usb3; + + if (!driver || driver->max_speed < USB_SPEED_FULL || + !driver->setup) + return -EINVAL; + + usb3 = gadget_to_renesas_usb3(gadget); + + /* hook up the driver */ + usb3->driver = driver; + + if (usb3->phy) + phy_init(usb3->phy); + + pm_runtime_get_sync(usb3_to_dev(usb3)); + + renesas_usb3_init_controller(usb3); + + return 0; +} + +static int renesas_usb3_stop(struct usb_gadget *gadget) +{ + struct renesas_usb3 *usb3 = gadget_to_renesas_usb3(gadget); + + usb3->softconnect = false; + usb3->gadget.speed = USB_SPEED_UNKNOWN; + usb3->driver = NULL; + renesas_usb3_stop_controller(usb3); + + if (usb3->phy) + phy_exit(usb3->phy); + + pm_runtime_put(usb3_to_dev(usb3)); + + return 0; +} + +static int renesas_usb3_get_frame(struct usb_gadget *_gadget) +{ + return -EOPNOTSUPP; +} + +static int renesas_usb3_pullup(struct usb_gadget *gadget, int is_on) +{ + struct renesas_usb3 *usb3 = gadget_to_renesas_usb3(gadget); + + usb3->softconnect = !!is_on; + + return 0; +} + +static int renesas_usb3_set_selfpowered(struct usb_gadget *gadget, int is_self) +{ + gadget->is_selfpowered = !!is_self; + + return 0; +} + +static const struct usb_gadget_ops renesas_usb3_gadget_ops = { + .get_frame = renesas_usb3_get_frame, + .udc_start = renesas_usb3_start, + .udc_stop = renesas_usb3_stop, + .pullup = renesas_usb3_pullup, + .set_selfpowered = renesas_usb3_set_selfpowered, +}; + +static enum usb_role renesas_usb3_role_switch_get(struct usb_role_switch *sw) +{ + struct renesas_usb3 *usb3 = usb_role_switch_get_drvdata(sw); + enum usb_role cur_role; + + pm_runtime_get_sync(usb3_to_dev(usb3)); + cur_role = usb3_is_host(usb3) ? USB_ROLE_HOST : USB_ROLE_DEVICE; + pm_runtime_put(usb3_to_dev(usb3)); + + return cur_role; +} + +static void handle_ext_role_switch_states(struct device *dev, + enum usb_role role) +{ + struct renesas_usb3 *usb3 = dev_get_drvdata(dev); + struct device *host = usb3->host_dev; + enum usb_role cur_role = renesas_usb3_role_switch_get(usb3->role_sw); + + switch (role) { + case USB_ROLE_NONE: + usb3->connection_state = USB_ROLE_NONE; + if (cur_role == USB_ROLE_HOST) + device_release_driver(host); + if (usb3->driver) + usb3_disconnect(usb3); + usb3_vbus_out(usb3, false); + break; + case USB_ROLE_DEVICE: + if (usb3->connection_state == USB_ROLE_NONE) { + usb3->connection_state = USB_ROLE_DEVICE; + usb3_set_mode(usb3, false); + if (usb3->driver) + usb3_connect(usb3); + } else if (cur_role == USB_ROLE_HOST) { + device_release_driver(host); + usb3_set_mode(usb3, false); + if (usb3->driver) + usb3_connect(usb3); + } + usb3_vbus_out(usb3, false); + break; + case USB_ROLE_HOST: + if (usb3->connection_state == USB_ROLE_NONE) { + if (usb3->driver) + usb3_disconnect(usb3); + + usb3->connection_state = USB_ROLE_HOST; + usb3_set_mode(usb3, true); + usb3_vbus_out(usb3, true); + if (device_attach(host) < 0) + dev_err(dev, "device_attach(host) failed\n"); + } else if (cur_role == USB_ROLE_DEVICE) { + usb3_disconnect(usb3); + /* Must set the mode before device_attach of the host */ + usb3_set_mode(usb3, true); + /* This device_attach() might sleep */ + if (device_attach(host) < 0) + dev_err(dev, "device_attach(host) failed\n"); + } + break; + default: + break; + } +} + +static void handle_role_switch_states(struct device *dev, + enum usb_role role) +{ + struct renesas_usb3 *usb3 = dev_get_drvdata(dev); + struct device *host = usb3->host_dev; + enum usb_role cur_role = renesas_usb3_role_switch_get(usb3->role_sw); + + if (cur_role == USB_ROLE_HOST && role == USB_ROLE_DEVICE) { + device_release_driver(host); + usb3_set_mode(usb3, false); + } else if (cur_role == USB_ROLE_DEVICE && role == USB_ROLE_HOST) { + /* Must set the mode before device_attach of the host */ + usb3_set_mode(usb3, true); + /* This device_attach() might sleep */ + if (device_attach(host) < 0) + dev_err(dev, "device_attach(host) failed\n"); + } +} + +static int renesas_usb3_role_switch_set(struct usb_role_switch *sw, + enum usb_role role) +{ + struct renesas_usb3 *usb3 = usb_role_switch_get_drvdata(sw); + + pm_runtime_get_sync(usb3_to_dev(usb3)); + + if (usb3->role_sw_by_connector) + handle_ext_role_switch_states(usb3_to_dev(usb3), role); + else + handle_role_switch_states(usb3_to_dev(usb3), role); + + pm_runtime_put(usb3_to_dev(usb3)); + + return 0; +} + +static ssize_t role_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct renesas_usb3 *usb3 = dev_get_drvdata(dev); + bool new_mode_is_host; + + if (!usb3->driver) + return -ENODEV; + + if (usb3->forced_b_device) + return -EBUSY; + + if (sysfs_streq(buf, "host")) + new_mode_is_host = true; + else if (sysfs_streq(buf, "peripheral")) + new_mode_is_host = false; + else + return -EINVAL; + + if (new_mode_is_host == usb3_is_host(usb3)) + return -EINVAL; + + usb3_mode_config(usb3, new_mode_is_host, usb3_is_a_device(usb3)); + + return count; +} + +static ssize_t role_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct renesas_usb3 *usb3 = dev_get_drvdata(dev); + + if (!usb3->driver) + return -ENODEV; + + return sprintf(buf, "%s\n", usb3_is_host(usb3) ? "host" : "peripheral"); +} +static DEVICE_ATTR_RW(role); + +static int renesas_usb3_b_device_show(struct seq_file *s, void *unused) +{ + struct renesas_usb3 *usb3 = s->private; + + seq_printf(s, "%d\n", usb3->forced_b_device); + + return 0; +} + +static int renesas_usb3_b_device_open(struct inode *inode, struct file *file) +{ + return single_open(file, renesas_usb3_b_device_show, inode->i_private); +} + +static ssize_t renesas_usb3_b_device_write(struct file *file, + const char __user *ubuf, + size_t count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct renesas_usb3 *usb3 = s->private; + char buf[32]; + + if (!usb3->driver) + return -ENODEV; + + if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) + return -EFAULT; + + usb3->start_to_connect = false; + if (usb3->workaround_for_vbus && usb3->forced_b_device && + !strncmp(buf, "2", 1)) + usb3->start_to_connect = true; + else if (!strncmp(buf, "1", 1)) + usb3->forced_b_device = true; + else + usb3->forced_b_device = false; + + if (usb3->workaround_for_vbus) + usb3_disconnect(usb3); + + /* Let this driver call usb3_connect() if needed */ + usb3_check_id(usb3); + + return count; +} + +static const struct file_operations renesas_usb3_b_device_fops = { + .open = renesas_usb3_b_device_open, + .write = renesas_usb3_b_device_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void renesas_usb3_debugfs_init(struct renesas_usb3 *usb3, + struct device *dev) +{ + usb3->dentry = debugfs_create_dir(dev_name(dev), usb_debug_root); + + debugfs_create_file("b_device", 0644, usb3->dentry, usb3, + &renesas_usb3_b_device_fops); +} + +/*------- platform_driver ------------------------------------------------*/ +static int renesas_usb3_remove(struct platform_device *pdev) +{ + struct renesas_usb3 *usb3 = platform_get_drvdata(pdev); + + debugfs_remove_recursive(usb3->dentry); + device_remove_file(&pdev->dev, &dev_attr_role); + + cancel_work_sync(&usb3->role_work); + usb_role_switch_unregister(usb3->role_sw); + + usb_del_gadget_udc(&usb3->gadget); + reset_control_assert(usb3->usbp_rstc); + reset_control_assert(usb3->drd_rstc); + renesas_usb3_dma_free_prd(usb3, &pdev->dev); + + __renesas_usb3_ep_free_request(usb3->ep0_req); + pm_runtime_disable(&pdev->dev); + + return 0; +} + +static int renesas_usb3_init_ep(struct renesas_usb3 *usb3, struct device *dev, + const struct renesas_usb3_priv *priv) +{ + struct renesas_usb3_ep *usb3_ep; + int i; + + /* calculate num_usb3_eps from renesas_usb3_priv */ + usb3->num_usb3_eps = priv->ramsize_per_ramif * priv->num_ramif * 2 / + priv->ramsize_per_pipe + 1; + + if (usb3->num_usb3_eps > USB3_MAX_NUM_PIPES(usb3)) + usb3->num_usb3_eps = USB3_MAX_NUM_PIPES(usb3); + + usb3->usb3_ep = devm_kcalloc(dev, + usb3->num_usb3_eps, sizeof(*usb3_ep), + GFP_KERNEL); + if (!usb3->usb3_ep) + return -ENOMEM; + + dev_dbg(dev, "%s: num_usb3_eps = %d\n", __func__, usb3->num_usb3_eps); + /* + * This driver prepares pipes as follows: + * - odd pipes = IN pipe + * - even pipes = OUT pipe (except pipe 0) + */ + usb3_for_each_ep(usb3_ep, usb3, i) { + snprintf(usb3_ep->ep_name, sizeof(usb3_ep->ep_name), "ep%d", i); + usb3_ep->usb3 = usb3; + usb3_ep->num = i; + usb3_ep->ep.name = usb3_ep->ep_name; + usb3_ep->ep.ops = &renesas_usb3_ep_ops; + INIT_LIST_HEAD(&usb3_ep->queue); + INIT_LIST_HEAD(&usb3_ep->ep.ep_list); + if (!i) { + /* for control pipe */ + usb3->gadget.ep0 = &usb3_ep->ep; + usb_ep_set_maxpacket_limit(&usb3_ep->ep, + USB3_EP0_SS_MAX_PACKET_SIZE); + usb3_ep->ep.caps.type_control = true; + usb3_ep->ep.caps.dir_in = true; + usb3_ep->ep.caps.dir_out = true; + continue; + } + + /* for bulk or interrupt pipe */ + usb_ep_set_maxpacket_limit(&usb3_ep->ep, ~0); + list_add_tail(&usb3_ep->ep.ep_list, &usb3->gadget.ep_list); + usb3_ep->ep.caps.type_bulk = true; + usb3_ep->ep.caps.type_int = true; + if (i & 1) + usb3_ep->ep.caps.dir_in = true; + else + usb3_ep->ep.caps.dir_out = true; + } + + return 0; +} + +static void renesas_usb3_init_ram(struct renesas_usb3 *usb3, struct device *dev, + const struct renesas_usb3_priv *priv) +{ + struct renesas_usb3_ep *usb3_ep; + int i; + u32 ramif[2], basead[2]; /* index 0 = for IN pipes */ + u32 *cur_ramif, *cur_basead; + u32 val; + + memset(ramif, 0, sizeof(ramif)); + memset(basead, 0, sizeof(basead)); + + /* + * This driver prepares pipes as follows: + * - all pipes = the same size as "ramsize_per_pipe" + * Please refer to the "Method of Specifying RAM Mapping" + */ + usb3_for_each_ep(usb3_ep, usb3, i) { + if (!i) + continue; /* out of scope if ep num = 0 */ + if (usb3_ep->ep.caps.dir_in) { + cur_ramif = &ramif[0]; + cur_basead = &basead[0]; + } else { + cur_ramif = &ramif[1]; + cur_basead = &basead[1]; + } + + if (*cur_basead > priv->ramsize_per_ramif) + continue; /* out of memory for IN or OUT pipe */ + + /* calculate rammap_val */ + val = PN_RAMMAP_RAMIF(*cur_ramif); + val |= usb3_calc_ramarea(priv->ramsize_per_pipe); + val |= PN_RAMMAP_BASEAD(*cur_basead); + usb3_ep->rammap_val = val; + + dev_dbg(dev, "ep%2d: val = %08x, ramif = %d, base = %x\n", + i, val, *cur_ramif, *cur_basead); + + /* update current ramif */ + if (*cur_ramif + 1 == priv->num_ramif) { + *cur_ramif = 0; + *cur_basead += priv->ramsize_per_pipe; + } else { + (*cur_ramif)++; + } + } +} + +static const struct renesas_usb3_priv renesas_usb3_priv_r8a7795_es1 = { + .ramsize_per_ramif = SZ_16K, + .num_ramif = 2, + .ramsize_per_pipe = SZ_4K, + .workaround_for_vbus = true, +}; + +static const struct renesas_usb3_priv renesas_usb3_priv_gen3 = { + .ramsize_per_ramif = SZ_16K, + .num_ramif = 4, + .ramsize_per_pipe = SZ_4K, +}; + +static const struct renesas_usb3_priv renesas_usb3_priv_r8a77990 = { + .ramsize_per_ramif = SZ_16K, + .num_ramif = 4, + .ramsize_per_pipe = SZ_4K, + .workaround_for_vbus = true, +}; + +static const struct renesas_usb3_priv renesas_usb3_priv_rzv2m = { + .ramsize_per_ramif = SZ_16K, + .num_ramif = 1, + .ramsize_per_pipe = SZ_4K, + .is_rzv2m = true, +}; + +static const struct of_device_id usb3_of_match[] = { + { + .compatible = "renesas,r8a774c0-usb3-peri", + .data = &renesas_usb3_priv_r8a77990, + }, { + .compatible = "renesas,r8a7795-usb3-peri", + .data = &renesas_usb3_priv_gen3, + }, { + .compatible = "renesas,r8a77990-usb3-peri", + .data = &renesas_usb3_priv_r8a77990, + }, { + .compatible = "renesas,rzv2m-usb3-peri", + .data = &renesas_usb3_priv_rzv2m, + }, { + .compatible = "renesas,rcar-gen3-usb3-peri", + .data = &renesas_usb3_priv_gen3, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, usb3_of_match); + +static const struct soc_device_attribute renesas_usb3_quirks_match[] = { + { + .soc_id = "r8a7795", .revision = "ES1.*", + .data = &renesas_usb3_priv_r8a7795_es1, + }, + { /* sentinel */ } +}; + +static const unsigned int renesas_usb3_cable[] = { + EXTCON_USB, + EXTCON_USB_HOST, + EXTCON_NONE, +}; + +static struct usb_role_switch_desc renesas_usb3_role_switch_desc = { + .set = renesas_usb3_role_switch_set, + .get = renesas_usb3_role_switch_get, + .allow_userspace_control = true, +}; + +static int renesas_usb3_probe(struct platform_device *pdev) +{ + struct renesas_usb3 *usb3; + int irq, drd_irq, ret; + const struct renesas_usb3_priv *priv; + const struct soc_device_attribute *attr; + + attr = soc_device_match(renesas_usb3_quirks_match); + if (attr) + priv = attr->data; + else + priv = of_device_get_match_data(&pdev->dev); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + if (priv->is_rzv2m) { + drd_irq = platform_get_irq_byname(pdev, "drd"); + if (drd_irq < 0) + return drd_irq; + } + + usb3 = devm_kzalloc(&pdev->dev, sizeof(*usb3), GFP_KERNEL); + if (!usb3) + return -ENOMEM; + + usb3->is_rzv2m = priv->is_rzv2m; + + usb3->reg = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(usb3->reg)) + return PTR_ERR(usb3->reg); + + platform_set_drvdata(pdev, usb3); + spin_lock_init(&usb3->lock); + + usb3->gadget.ops = &renesas_usb3_gadget_ops; + usb3->gadget.name = udc_name; + usb3->gadget.max_speed = USB_SPEED_SUPER; + INIT_LIST_HEAD(&usb3->gadget.ep_list); + ret = renesas_usb3_init_ep(usb3, &pdev->dev, priv); + if (ret < 0) + return ret; + renesas_usb3_init_ram(usb3, &pdev->dev, priv); + + ret = devm_request_irq(&pdev->dev, irq, renesas_usb3_irq, 0, + dev_name(&pdev->dev), usb3); + if (ret < 0) + return ret; + + if (usb3->is_rzv2m) { + ret = devm_request_irq(&pdev->dev, drd_irq, + renesas_usb3_otg_irq, 0, + dev_name(&pdev->dev), usb3); + if (ret < 0) + return ret; + } + + INIT_WORK(&usb3->extcon_work, renesas_usb3_extcon_work); + usb3->extcon = devm_extcon_dev_allocate(&pdev->dev, renesas_usb3_cable); + if (IS_ERR(usb3->extcon)) + return PTR_ERR(usb3->extcon); + + ret = devm_extcon_dev_register(&pdev->dev, usb3->extcon); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to register extcon\n"); + return ret; + } + + /* for ep0 handling */ + usb3->ep0_req = __renesas_usb3_ep_alloc_request(GFP_KERNEL); + if (!usb3->ep0_req) + return -ENOMEM; + + ret = renesas_usb3_dma_alloc_prd(usb3, &pdev->dev); + if (ret < 0) + goto err_alloc_prd; + + /* + * This is optional. So, if this driver cannot get a phy, + * this driver will not handle a phy anymore. + */ + usb3->phy = devm_phy_optional_get(&pdev->dev, "usb"); + if (IS_ERR(usb3->phy)) { + ret = PTR_ERR(usb3->phy); + goto err_add_udc; + } + + usb3->drd_rstc = devm_reset_control_get_optional_shared(&pdev->dev, + "drd_reset"); + if (IS_ERR(usb3->drd_rstc)) { + ret = PTR_ERR(usb3->drd_rstc); + goto err_add_udc; + } + + usb3->usbp_rstc = devm_reset_control_get_optional_shared(&pdev->dev, + "aresetn_p"); + if (IS_ERR(usb3->usbp_rstc)) { + ret = PTR_ERR(usb3->usbp_rstc); + goto err_add_udc; + } + + reset_control_deassert(usb3->drd_rstc); + reset_control_deassert(usb3->usbp_rstc); + + pm_runtime_enable(&pdev->dev); + ret = usb_add_gadget_udc(&pdev->dev, &usb3->gadget); + if (ret < 0) + goto err_reset; + + ret = device_create_file(&pdev->dev, &dev_attr_role); + if (ret < 0) + goto err_dev_create; + + if (device_property_read_bool(&pdev->dev, "usb-role-switch")) { + usb3->role_sw_by_connector = true; + renesas_usb3_role_switch_desc.fwnode = dev_fwnode(&pdev->dev); + } + + renesas_usb3_role_switch_desc.driver_data = usb3; + + INIT_WORK(&usb3->role_work, renesas_usb3_role_work); + usb3->role_sw = usb_role_switch_register(&pdev->dev, + &renesas_usb3_role_switch_desc); + if (!IS_ERR(usb3->role_sw)) { + usb3->host_dev = usb_of_get_companion_dev(&pdev->dev); + if (!usb3->host_dev) { + /* If not found, this driver will not use a role sw */ + usb_role_switch_unregister(usb3->role_sw); + usb3->role_sw = NULL; + } + } else { + usb3->role_sw = NULL; + } + + usb3->workaround_for_vbus = priv->workaround_for_vbus; + + renesas_usb3_debugfs_init(usb3, &pdev->dev); + + dev_info(&pdev->dev, "probed%s\n", usb3->phy ? " with phy" : ""); + + return 0; + +err_dev_create: + usb_del_gadget_udc(&usb3->gadget); + +err_reset: + reset_control_assert(usb3->usbp_rstc); + reset_control_assert(usb3->drd_rstc); + +err_add_udc: + renesas_usb3_dma_free_prd(usb3, &pdev->dev); + +err_alloc_prd: + __renesas_usb3_ep_free_request(usb3->ep0_req); + + return ret; +} + +#ifdef CONFIG_PM_SLEEP +static int renesas_usb3_suspend(struct device *dev) +{ + struct renesas_usb3 *usb3 = dev_get_drvdata(dev); + + /* Not started */ + if (!usb3->driver) + return 0; + + renesas_usb3_stop_controller(usb3); + if (usb3->phy) + phy_exit(usb3->phy); + pm_runtime_put(dev); + + return 0; +} + +static int renesas_usb3_resume(struct device *dev) +{ + struct renesas_usb3 *usb3 = dev_get_drvdata(dev); + + /* Not started */ + if (!usb3->driver) + return 0; + + if (usb3->phy) + phy_init(usb3->phy); + pm_runtime_get_sync(dev); + renesas_usb3_init_controller(usb3); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(renesas_usb3_pm_ops, renesas_usb3_suspend, + renesas_usb3_resume); + +static struct platform_driver renesas_usb3_driver = { + .probe = renesas_usb3_probe, + .remove = renesas_usb3_remove, + .driver = { + .name = udc_name, + .pm = &renesas_usb3_pm_ops, + .of_match_table = of_match_ptr(usb3_of_match), + }, +}; +module_platform_driver(renesas_usb3_driver); + +MODULE_DESCRIPTION("Renesas USB3.0 Peripheral driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>"); +MODULE_ALIAS("platform:renesas_usb3"); diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c new file mode 100644 index 000000000..4b7eb7701 --- /dev/null +++ b/drivers/usb/gadget/udc/s3c-hsudc.c @@ -0,0 +1,1319 @@ +// SPDX-License-Identifier: GPL-2.0 +/* linux/drivers/usb/gadget/s3c-hsudc.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S3C24XX USB 2.0 High-speed USB controller gadget driver + * + * The S3C24XX USB 2.0 high-speed USB controller supports upto 9 endpoints. + * Each endpoint can be configured as either in or out endpoint. Endpoints + * can be configured for Bulk or Interrupt transfer mode. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/otg.h> +#include <linux/prefetch.h> +#include <linux/platform_data/s3c-hsudc.h> +#include <linux/regulator/consumer.h> +#include <linux/pm_runtime.h> + +#define S3C_HSUDC_REG(x) (x) + +/* Non-Indexed Registers */ +#define S3C_IR S3C_HSUDC_REG(0x00) /* Index Register */ +#define S3C_EIR S3C_HSUDC_REG(0x04) /* EP Intr Status */ +#define S3C_EIR_EP0 (1<<0) +#define S3C_EIER S3C_HSUDC_REG(0x08) /* EP Intr Enable */ +#define S3C_FAR S3C_HSUDC_REG(0x0c) /* Gadget Address */ +#define S3C_FNR S3C_HSUDC_REG(0x10) /* Frame Number */ +#define S3C_EDR S3C_HSUDC_REG(0x14) /* EP Direction */ +#define S3C_TR S3C_HSUDC_REG(0x18) /* Test Register */ +#define S3C_SSR S3C_HSUDC_REG(0x1c) /* System Status */ +#define S3C_SSR_DTZIEN_EN (0xff8f) +#define S3C_SSR_ERR (0xff80) +#define S3C_SSR_VBUSON (1 << 8) +#define S3C_SSR_HSP (1 << 4) +#define S3C_SSR_SDE (1 << 3) +#define S3C_SSR_RESUME (1 << 2) +#define S3C_SSR_SUSPEND (1 << 1) +#define S3C_SSR_RESET (1 << 0) +#define S3C_SCR S3C_HSUDC_REG(0x20) /* System Control */ +#define S3C_SCR_DTZIEN_EN (1 << 14) +#define S3C_SCR_RRD_EN (1 << 5) +#define S3C_SCR_SUS_EN (1 << 1) +#define S3C_SCR_RST_EN (1 << 0) +#define S3C_EP0SR S3C_HSUDC_REG(0x24) /* EP0 Status */ +#define S3C_EP0SR_EP0_LWO (1 << 6) +#define S3C_EP0SR_STALL (1 << 4) +#define S3C_EP0SR_TX_SUCCESS (1 << 1) +#define S3C_EP0SR_RX_SUCCESS (1 << 0) +#define S3C_EP0CR S3C_HSUDC_REG(0x28) /* EP0 Control */ +#define S3C_BR(_x) S3C_HSUDC_REG(0x60 + (_x * 4)) + +/* Indexed Registers */ +#define S3C_ESR S3C_HSUDC_REG(0x2c) /* EPn Status */ +#define S3C_ESR_FLUSH (1 << 6) +#define S3C_ESR_STALL (1 << 5) +#define S3C_ESR_LWO (1 << 4) +#define S3C_ESR_PSIF_ONE (1 << 2) +#define S3C_ESR_PSIF_TWO (2 << 2) +#define S3C_ESR_TX_SUCCESS (1 << 1) +#define S3C_ESR_RX_SUCCESS (1 << 0) +#define S3C_ECR S3C_HSUDC_REG(0x30) /* EPn Control */ +#define S3C_ECR_DUEN (1 << 7) +#define S3C_ECR_FLUSH (1 << 6) +#define S3C_ECR_STALL (1 << 1) +#define S3C_ECR_IEMS (1 << 0) +#define S3C_BRCR S3C_HSUDC_REG(0x34) /* Read Count */ +#define S3C_BWCR S3C_HSUDC_REG(0x38) /* Write Count */ +#define S3C_MPR S3C_HSUDC_REG(0x3c) /* Max Pkt Size */ + +#define WAIT_FOR_SETUP (0) +#define DATA_STATE_XMIT (1) +#define DATA_STATE_RECV (2) + +static const char * const s3c_hsudc_supply_names[] = { + "vdda", /* analog phy supply, 3.3V */ + "vddi", /* digital phy supply, 1.2V */ + "vddosc", /* oscillator supply, 1.8V - 3.3V */ +}; + +/** + * struct s3c_hsudc_ep - Endpoint representation used by driver. + * @ep: USB gadget layer representation of device endpoint. + * @name: Endpoint name (as required by ep autoconfiguration). + * @dev: Reference to the device controller to which this EP belongs. + * @desc: Endpoint descriptor obtained from the gadget driver. + * @queue: Transfer request queue for the endpoint. + * @stopped: Maintains state of endpoint, set if EP is halted. + * @bEndpointAddress: EP address (including direction bit). + * @fifo: Base address of EP FIFO. + */ +struct s3c_hsudc_ep { + struct usb_ep ep; + char name[20]; + struct s3c_hsudc *dev; + struct list_head queue; + u8 stopped; + u8 wedge; + u8 bEndpointAddress; + void __iomem *fifo; +}; + +/** + * struct s3c_hsudc_req - Driver encapsulation of USB gadget transfer request. + * @req: Reference to USB gadget transfer request. + * @queue: Used for inserting this request to the endpoint request queue. + */ +struct s3c_hsudc_req { + struct usb_request req; + struct list_head queue; +}; + +/** + * struct s3c_hsudc - Driver's abstraction of the device controller. + * @gadget: Instance of usb_gadget which is referenced by gadget driver. + * @driver: Reference to currently active gadget driver. + * @dev: The device reference used by probe function. + * @lock: Lock to synchronize the usage of Endpoints (EP's are indexed). + * @regs: Remapped base address of controller's register space. + * irq: IRQ number used by the controller. + * uclk: Reference to the controller clock. + * ep0state: Current state of EP0. + * ep: List of endpoints supported by the controller. + */ +struct s3c_hsudc { + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + struct device *dev; + struct s3c24xx_hsudc_platdata *pd; + struct usb_phy *transceiver; + struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsudc_supply_names)]; + spinlock_t lock; + void __iomem *regs; + int irq; + struct clk *uclk; + int ep0state; + struct s3c_hsudc_ep ep[]; +}; + +#define ep_maxpacket(_ep) ((_ep)->ep.maxpacket) +#define ep_is_in(_ep) ((_ep)->bEndpointAddress & USB_DIR_IN) +#define ep_index(_ep) ((_ep)->bEndpointAddress & \ + USB_ENDPOINT_NUMBER_MASK) + +static const char driver_name[] = "s3c-udc"; +static const char ep0name[] = "ep0-control"; + +static inline struct s3c_hsudc_req *our_req(struct usb_request *req) +{ + return container_of(req, struct s3c_hsudc_req, req); +} + +static inline struct s3c_hsudc_ep *our_ep(struct usb_ep *ep) +{ + return container_of(ep, struct s3c_hsudc_ep, ep); +} + +static inline struct s3c_hsudc *to_hsudc(struct usb_gadget *gadget) +{ + return container_of(gadget, struct s3c_hsudc, gadget); +} + +static inline void set_index(struct s3c_hsudc *hsudc, int ep_addr) +{ + ep_addr &= USB_ENDPOINT_NUMBER_MASK; + writel(ep_addr, hsudc->regs + S3C_IR); +} + +static inline void __orr32(void __iomem *ptr, u32 val) +{ + writel(readl(ptr) | val, ptr); +} + +/** + * s3c_hsudc_complete_request - Complete a transfer request. + * @hsep: Endpoint to which the request belongs. + * @hsreq: Transfer request to be completed. + * @status: Transfer completion status for the transfer request. + */ +static void s3c_hsudc_complete_request(struct s3c_hsudc_ep *hsep, + struct s3c_hsudc_req *hsreq, int status) +{ + unsigned int stopped = hsep->stopped; + struct s3c_hsudc *hsudc = hsep->dev; + + list_del_init(&hsreq->queue); + hsreq->req.status = status; + + if (!ep_index(hsep)) { + hsudc->ep0state = WAIT_FOR_SETUP; + hsep->bEndpointAddress &= ~USB_DIR_IN; + } + + hsep->stopped = 1; + spin_unlock(&hsudc->lock); + usb_gadget_giveback_request(&hsep->ep, &hsreq->req); + spin_lock(&hsudc->lock); + hsep->stopped = stopped; +} + +/** + * s3c_hsudc_nuke_ep - Terminate all requests queued for a endpoint. + * @hsep: Endpoint for which queued requests have to be terminated. + * @status: Transfer completion status for the transfer request. + */ +static void s3c_hsudc_nuke_ep(struct s3c_hsudc_ep *hsep, int status) +{ + struct s3c_hsudc_req *hsreq; + + while (!list_empty(&hsep->queue)) { + hsreq = list_entry(hsep->queue.next, + struct s3c_hsudc_req, queue); + s3c_hsudc_complete_request(hsep, hsreq, status); + } +} + +/** + * s3c_hsudc_stop_activity - Stop activity on all endpoints. + * @hsudc: Device controller for which EP activity is to be stopped. + * + * All the endpoints are stopped and any pending transfer requests if any on + * the endpoint are terminated. + */ +static void s3c_hsudc_stop_activity(struct s3c_hsudc *hsudc) +{ + struct s3c_hsudc_ep *hsep; + int epnum; + + hsudc->gadget.speed = USB_SPEED_UNKNOWN; + + for (epnum = 0; epnum < hsudc->pd->epnum; epnum++) { + hsep = &hsudc->ep[epnum]; + hsep->stopped = 1; + s3c_hsudc_nuke_ep(hsep, -ESHUTDOWN); + } +} + +/** + * s3c_hsudc_read_setup_pkt - Read the received setup packet from EP0 fifo. + * @hsudc: Device controller from which setup packet is to be read. + * @buf: The buffer into which the setup packet is read. + * + * The setup packet received in the EP0 fifo is read and stored into a + * given buffer address. + */ + +static void s3c_hsudc_read_setup_pkt(struct s3c_hsudc *hsudc, u16 *buf) +{ + int count; + + count = readl(hsudc->regs + S3C_BRCR); + while (count--) + *buf++ = (u16)readl(hsudc->regs + S3C_BR(0)); + + writel(S3C_EP0SR_RX_SUCCESS, hsudc->regs + S3C_EP0SR); +} + +/** + * s3c_hsudc_write_fifo - Write next chunk of transfer data to EP fifo. + * @hsep: Endpoint to which the data is to be written. + * @hsreq: Transfer request from which the next chunk of data is written. + * + * Write the next chunk of data from a transfer request to the endpoint FIFO. + * If the transfer request completes, 1 is returned, otherwise 0 is returned. + */ +static int s3c_hsudc_write_fifo(struct s3c_hsudc_ep *hsep, + struct s3c_hsudc_req *hsreq) +{ + u16 *buf; + u32 max = ep_maxpacket(hsep); + u32 count, length; + bool is_last; + void __iomem *fifo = hsep->fifo; + + buf = hsreq->req.buf + hsreq->req.actual; + prefetch(buf); + + length = hsreq->req.length - hsreq->req.actual; + length = min(length, max); + hsreq->req.actual += length; + + writel(length, hsep->dev->regs + S3C_BWCR); + for (count = 0; count < length; count += 2) + writel(*buf++, fifo); + + if (count != max) { + is_last = true; + } else { + if (hsreq->req.length != hsreq->req.actual || hsreq->req.zero) + is_last = false; + else + is_last = true; + } + + if (is_last) { + s3c_hsudc_complete_request(hsep, hsreq, 0); + return 1; + } + + return 0; +} + +/** + * s3c_hsudc_read_fifo - Read the next chunk of data from EP fifo. + * @hsep: Endpoint from which the data is to be read. + * @hsreq: Transfer request to which the next chunk of data read is written. + * + * Read the next chunk of data from the endpoint FIFO and a write it to the + * transfer request buffer. If the transfer request completes, 1 is returned, + * otherwise 0 is returned. + */ +static int s3c_hsudc_read_fifo(struct s3c_hsudc_ep *hsep, + struct s3c_hsudc_req *hsreq) +{ + struct s3c_hsudc *hsudc = hsep->dev; + u32 csr, offset; + u16 *buf, word; + u32 buflen, rcnt, rlen; + void __iomem *fifo = hsep->fifo; + u32 is_short = 0; + + offset = (ep_index(hsep)) ? S3C_ESR : S3C_EP0SR; + csr = readl(hsudc->regs + offset); + if (!(csr & S3C_ESR_RX_SUCCESS)) + return -EINVAL; + + buf = hsreq->req.buf + hsreq->req.actual; + prefetchw(buf); + buflen = hsreq->req.length - hsreq->req.actual; + + rcnt = readl(hsudc->regs + S3C_BRCR); + rlen = (csr & S3C_ESR_LWO) ? (rcnt * 2 - 1) : (rcnt * 2); + + hsreq->req.actual += min(rlen, buflen); + is_short = (rlen < hsep->ep.maxpacket); + + while (rcnt-- != 0) { + word = (u16)readl(fifo); + if (buflen) { + *buf++ = word; + buflen--; + } else { + hsreq->req.status = -EOVERFLOW; + } + } + + writel(S3C_ESR_RX_SUCCESS, hsudc->regs + offset); + + if (is_short || hsreq->req.actual == hsreq->req.length) { + s3c_hsudc_complete_request(hsep, hsreq, 0); + return 1; + } + + return 0; +} + +/** + * s3c_hsudc_epin_intr - Handle in-endpoint interrupt. + * @hsudc - Device controller for which the interrupt is to be handled. + * @ep_idx - Endpoint number on which an interrupt is pending. + * + * Handles interrupt for a in-endpoint. The interrupts that are handled are + * stall and data transmit complete interrupt. + */ +static void s3c_hsudc_epin_intr(struct s3c_hsudc *hsudc, u32 ep_idx) +{ + struct s3c_hsudc_ep *hsep = &hsudc->ep[ep_idx]; + struct s3c_hsudc_req *hsreq; + u32 csr; + + csr = readl(hsudc->regs + S3C_ESR); + if (csr & S3C_ESR_STALL) { + writel(S3C_ESR_STALL, hsudc->regs + S3C_ESR); + return; + } + + if (csr & S3C_ESR_TX_SUCCESS) { + writel(S3C_ESR_TX_SUCCESS, hsudc->regs + S3C_ESR); + if (list_empty(&hsep->queue)) + return; + + hsreq = list_entry(hsep->queue.next, + struct s3c_hsudc_req, queue); + if ((s3c_hsudc_write_fifo(hsep, hsreq) == 0) && + (csr & S3C_ESR_PSIF_TWO)) + s3c_hsudc_write_fifo(hsep, hsreq); + } +} + +/** + * s3c_hsudc_epout_intr - Handle out-endpoint interrupt. + * @hsudc - Device controller for which the interrupt is to be handled. + * @ep_idx - Endpoint number on which an interrupt is pending. + * + * Handles interrupt for a out-endpoint. The interrupts that are handled are + * stall, flush and data ready interrupt. + */ +static void s3c_hsudc_epout_intr(struct s3c_hsudc *hsudc, u32 ep_idx) +{ + struct s3c_hsudc_ep *hsep = &hsudc->ep[ep_idx]; + struct s3c_hsudc_req *hsreq; + u32 csr; + + csr = readl(hsudc->regs + S3C_ESR); + if (csr & S3C_ESR_STALL) { + writel(S3C_ESR_STALL, hsudc->regs + S3C_ESR); + return; + } + + if (csr & S3C_ESR_FLUSH) { + __orr32(hsudc->regs + S3C_ECR, S3C_ECR_FLUSH); + return; + } + + if (csr & S3C_ESR_RX_SUCCESS) { + if (list_empty(&hsep->queue)) + return; + + hsreq = list_entry(hsep->queue.next, + struct s3c_hsudc_req, queue); + if (((s3c_hsudc_read_fifo(hsep, hsreq)) == 0) && + (csr & S3C_ESR_PSIF_TWO)) + s3c_hsudc_read_fifo(hsep, hsreq); + } +} + +/** s3c_hsudc_set_halt - Set or clear a endpoint halt. + * @_ep: Endpoint on which halt has to be set or cleared. + * @value: 1 for setting halt on endpoint, 0 to clear halt. + * + * Set or clear endpoint halt. If halt is set, the endpoint is stopped. + * If halt is cleared, for in-endpoints, if there are any pending + * transfer requests, transfers are started. + */ +static int s3c_hsudc_set_halt(struct usb_ep *_ep, int value) +{ + struct s3c_hsudc_ep *hsep = our_ep(_ep); + struct s3c_hsudc *hsudc = hsep->dev; + struct s3c_hsudc_req *hsreq; + unsigned long irqflags; + u32 ecr; + u32 offset; + + if (value && ep_is_in(hsep) && !list_empty(&hsep->queue)) + return -EAGAIN; + + spin_lock_irqsave(&hsudc->lock, irqflags); + set_index(hsudc, ep_index(hsep)); + offset = (ep_index(hsep)) ? S3C_ECR : S3C_EP0CR; + ecr = readl(hsudc->regs + offset); + + if (value) { + ecr |= S3C_ECR_STALL; + if (ep_index(hsep)) + ecr |= S3C_ECR_FLUSH; + hsep->stopped = 1; + } else { + ecr &= ~S3C_ECR_STALL; + hsep->stopped = hsep->wedge = 0; + } + writel(ecr, hsudc->regs + offset); + + if (ep_is_in(hsep) && !list_empty(&hsep->queue) && !value) { + hsreq = list_entry(hsep->queue.next, + struct s3c_hsudc_req, queue); + if (hsreq) + s3c_hsudc_write_fifo(hsep, hsreq); + } + + spin_unlock_irqrestore(&hsudc->lock, irqflags); + return 0; +} + +/** s3c_hsudc_set_wedge - Sets the halt feature with the clear requests ignored + * @_ep: Endpoint on which wedge has to be set. + * + * Sets the halt feature with the clear requests ignored. + */ +static int s3c_hsudc_set_wedge(struct usb_ep *_ep) +{ + struct s3c_hsudc_ep *hsep = our_ep(_ep); + + if (!hsep) + return -EINVAL; + + hsep->wedge = 1; + return usb_ep_set_halt(_ep); +} + +/** s3c_hsudc_handle_reqfeat - Handle set feature or clear feature requests. + * @_ep: Device controller on which the set/clear feature needs to be handled. + * @ctrl: Control request as received on the endpoint 0. + * + * Handle set feature or clear feature control requests on the control endpoint. + */ +static int s3c_hsudc_handle_reqfeat(struct s3c_hsudc *hsudc, + struct usb_ctrlrequest *ctrl) +{ + struct s3c_hsudc_ep *hsep; + bool set = (ctrl->bRequest == USB_REQ_SET_FEATURE); + u8 ep_num = ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK; + + if (ctrl->bRequestType == USB_RECIP_ENDPOINT) { + hsep = &hsudc->ep[ep_num]; + switch (le16_to_cpu(ctrl->wValue)) { + case USB_ENDPOINT_HALT: + if (set || !hsep->wedge) + s3c_hsudc_set_halt(&hsep->ep, set); + return 0; + } + } + + return -ENOENT; +} + +/** + * s3c_hsudc_process_req_status - Handle get status control request. + * @hsudc: Device controller on which get status request has be handled. + * @ctrl: Control request as received on the endpoint 0. + * + * Handle get status control request received on control endpoint. + */ +static void s3c_hsudc_process_req_status(struct s3c_hsudc *hsudc, + struct usb_ctrlrequest *ctrl) +{ + struct s3c_hsudc_ep *hsep0 = &hsudc->ep[0]; + struct s3c_hsudc_req hsreq; + struct s3c_hsudc_ep *hsep; + __le16 reply; + u8 epnum; + + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + reply = cpu_to_le16(0); + break; + + case USB_RECIP_INTERFACE: + reply = cpu_to_le16(0); + break; + + case USB_RECIP_ENDPOINT: + epnum = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK; + hsep = &hsudc->ep[epnum]; + reply = cpu_to_le16(hsep->stopped ? 1 : 0); + break; + } + + INIT_LIST_HEAD(&hsreq.queue); + hsreq.req.length = 2; + hsreq.req.buf = &reply; + hsreq.req.actual = 0; + hsreq.req.complete = NULL; + s3c_hsudc_write_fifo(hsep0, &hsreq); +} + +/** + * s3c_hsudc_process_setup - Process control request received on endpoint 0. + * @hsudc: Device controller on which control request has been received. + * + * Read the control request received on endpoint 0, decode it and handle + * the request. + */ +static void s3c_hsudc_process_setup(struct s3c_hsudc *hsudc) +{ + struct s3c_hsudc_ep *hsep = &hsudc->ep[0]; + struct usb_ctrlrequest ctrl = {0}; + int ret; + + s3c_hsudc_nuke_ep(hsep, -EPROTO); + s3c_hsudc_read_setup_pkt(hsudc, (u16 *)&ctrl); + + if (ctrl.bRequestType & USB_DIR_IN) { + hsep->bEndpointAddress |= USB_DIR_IN; + hsudc->ep0state = DATA_STATE_XMIT; + } else { + hsep->bEndpointAddress &= ~USB_DIR_IN; + hsudc->ep0state = DATA_STATE_RECV; + } + + switch (ctrl.bRequest) { + case USB_REQ_SET_ADDRESS: + if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE)) + break; + hsudc->ep0state = WAIT_FOR_SETUP; + return; + + case USB_REQ_GET_STATUS: + if ((ctrl.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD) + break; + s3c_hsudc_process_req_status(hsudc, &ctrl); + return; + + case USB_REQ_SET_FEATURE: + case USB_REQ_CLEAR_FEATURE: + if ((ctrl.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD) + break; + s3c_hsudc_handle_reqfeat(hsudc, &ctrl); + hsudc->ep0state = WAIT_FOR_SETUP; + return; + } + + if (hsudc->driver) { + spin_unlock(&hsudc->lock); + ret = hsudc->driver->setup(&hsudc->gadget, &ctrl); + spin_lock(&hsudc->lock); + + if (ctrl.bRequest == USB_REQ_SET_CONFIGURATION) { + hsep->bEndpointAddress &= ~USB_DIR_IN; + hsudc->ep0state = WAIT_FOR_SETUP; + } + + if (ret < 0) { + dev_err(hsudc->dev, "setup failed, returned %d\n", + ret); + s3c_hsudc_set_halt(&hsep->ep, 1); + hsudc->ep0state = WAIT_FOR_SETUP; + hsep->bEndpointAddress &= ~USB_DIR_IN; + } + } +} + +/** s3c_hsudc_handle_ep0_intr - Handle endpoint 0 interrupt. + * @hsudc: Device controller on which endpoint 0 interrupt has occurred. + * + * Handle endpoint 0 interrupt when it occurs. EP0 interrupt could occur + * when a stall handshake is sent to host or data is sent/received on + * endpoint 0. + */ +static void s3c_hsudc_handle_ep0_intr(struct s3c_hsudc *hsudc) +{ + struct s3c_hsudc_ep *hsep = &hsudc->ep[0]; + struct s3c_hsudc_req *hsreq; + u32 csr = readl(hsudc->regs + S3C_EP0SR); + u32 ecr; + + if (csr & S3C_EP0SR_STALL) { + ecr = readl(hsudc->regs + S3C_EP0CR); + ecr &= ~(S3C_ECR_STALL | S3C_ECR_FLUSH); + writel(ecr, hsudc->regs + S3C_EP0CR); + + writel(S3C_EP0SR_STALL, hsudc->regs + S3C_EP0SR); + hsep->stopped = 0; + + s3c_hsudc_nuke_ep(hsep, -ECONNABORTED); + hsudc->ep0state = WAIT_FOR_SETUP; + hsep->bEndpointAddress &= ~USB_DIR_IN; + return; + } + + if (csr & S3C_EP0SR_TX_SUCCESS) { + writel(S3C_EP0SR_TX_SUCCESS, hsudc->regs + S3C_EP0SR); + if (ep_is_in(hsep)) { + if (list_empty(&hsep->queue)) + return; + + hsreq = list_entry(hsep->queue.next, + struct s3c_hsudc_req, queue); + s3c_hsudc_write_fifo(hsep, hsreq); + } + } + + if (csr & S3C_EP0SR_RX_SUCCESS) { + if (hsudc->ep0state == WAIT_FOR_SETUP) + s3c_hsudc_process_setup(hsudc); + else { + if (!ep_is_in(hsep)) { + if (list_empty(&hsep->queue)) + return; + hsreq = list_entry(hsep->queue.next, + struct s3c_hsudc_req, queue); + s3c_hsudc_read_fifo(hsep, hsreq); + } + } + } +} + +/** + * s3c_hsudc_ep_enable - Enable a endpoint. + * @_ep: The endpoint to be enabled. + * @desc: Endpoint descriptor. + * + * Enables a endpoint when called from the gadget driver. Endpoint stall if + * any is cleared, transfer type is configured and endpoint interrupt is + * enabled. + */ +static int s3c_hsudc_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct s3c_hsudc_ep *hsep; + struct s3c_hsudc *hsudc; + unsigned long flags; + u32 ecr = 0; + + hsep = our_ep(_ep); + if (!_ep || !desc || _ep->name == ep0name + || desc->bDescriptorType != USB_DT_ENDPOINT + || hsep->bEndpointAddress != desc->bEndpointAddress + || ep_maxpacket(hsep) < usb_endpoint_maxp(desc)) + return -EINVAL; + + if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK + && usb_endpoint_maxp(desc) != ep_maxpacket(hsep)) + || !desc->wMaxPacketSize) + return -ERANGE; + + hsudc = hsep->dev; + if (!hsudc->driver || hsudc->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + spin_lock_irqsave(&hsudc->lock, flags); + + set_index(hsudc, hsep->bEndpointAddress); + ecr |= ((usb_endpoint_xfer_int(desc)) ? S3C_ECR_IEMS : S3C_ECR_DUEN); + writel(ecr, hsudc->regs + S3C_ECR); + + hsep->stopped = hsep->wedge = 0; + hsep->ep.desc = desc; + hsep->ep.maxpacket = usb_endpoint_maxp(desc); + + s3c_hsudc_set_halt(_ep, 0); + __set_bit(ep_index(hsep), hsudc->regs + S3C_EIER); + + spin_unlock_irqrestore(&hsudc->lock, flags); + return 0; +} + +/** + * s3c_hsudc_ep_disable - Disable a endpoint. + * @_ep: The endpoint to be disabled. + * @desc: Endpoint descriptor. + * + * Disables a endpoint when called from the gadget driver. + */ +static int s3c_hsudc_ep_disable(struct usb_ep *_ep) +{ + struct s3c_hsudc_ep *hsep = our_ep(_ep); + struct s3c_hsudc *hsudc = hsep->dev; + unsigned long flags; + + if (!_ep || !hsep->ep.desc) + return -EINVAL; + + spin_lock_irqsave(&hsudc->lock, flags); + + set_index(hsudc, hsep->bEndpointAddress); + __clear_bit(ep_index(hsep), hsudc->regs + S3C_EIER); + + s3c_hsudc_nuke_ep(hsep, -ESHUTDOWN); + + hsep->ep.desc = NULL; + hsep->stopped = 1; + + spin_unlock_irqrestore(&hsudc->lock, flags); + return 0; +} + +/** + * s3c_hsudc_alloc_request - Allocate a new request. + * @_ep: Endpoint for which request is allocated (not used). + * @gfp_flags: Flags used for the allocation. + * + * Allocates a single transfer request structure when called from gadget driver. + */ +static struct usb_request *s3c_hsudc_alloc_request(struct usb_ep *_ep, + gfp_t gfp_flags) +{ + struct s3c_hsudc_req *hsreq; + + hsreq = kzalloc(sizeof(*hsreq), gfp_flags); + if (!hsreq) + return NULL; + + INIT_LIST_HEAD(&hsreq->queue); + return &hsreq->req; +} + +/** + * s3c_hsudc_free_request - Deallocate a request. + * @ep: Endpoint for which request is deallocated (not used). + * @_req: Request to be deallocated. + * + * Allocates a single transfer request structure when called from gadget driver. + */ +static void s3c_hsudc_free_request(struct usb_ep *ep, struct usb_request *_req) +{ + struct s3c_hsudc_req *hsreq; + + hsreq = our_req(_req); + WARN_ON(!list_empty(&hsreq->queue)); + kfree(hsreq); +} + +/** + * s3c_hsudc_queue - Queue a transfer request for the endpoint. + * @_ep: Endpoint for which the request is queued. + * @_req: Request to be queued. + * @gfp_flags: Not used. + * + * Start or enqueue a request for a endpoint when called from gadget driver. + */ +static int s3c_hsudc_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t gfp_flags) +{ + struct s3c_hsudc_req *hsreq; + struct s3c_hsudc_ep *hsep; + struct s3c_hsudc *hsudc; + unsigned long flags; + u32 offset; + u32 csr; + + hsreq = our_req(_req); + if ((!_req || !_req->complete || !_req->buf || + !list_empty(&hsreq->queue))) + return -EINVAL; + + hsep = our_ep(_ep); + hsudc = hsep->dev; + if (!hsudc->driver || hsudc->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + spin_lock_irqsave(&hsudc->lock, flags); + set_index(hsudc, hsep->bEndpointAddress); + + _req->status = -EINPROGRESS; + _req->actual = 0; + + if (!ep_index(hsep) && _req->length == 0) { + hsudc->ep0state = WAIT_FOR_SETUP; + s3c_hsudc_complete_request(hsep, hsreq, 0); + spin_unlock_irqrestore(&hsudc->lock, flags); + return 0; + } + + if (list_empty(&hsep->queue) && !hsep->stopped) { + offset = (ep_index(hsep)) ? S3C_ESR : S3C_EP0SR; + if (ep_is_in(hsep)) { + csr = readl(hsudc->regs + offset); + if (!(csr & S3C_ESR_TX_SUCCESS) && + (s3c_hsudc_write_fifo(hsep, hsreq) == 1)) + hsreq = NULL; + } else { + csr = readl(hsudc->regs + offset); + if ((csr & S3C_ESR_RX_SUCCESS) + && (s3c_hsudc_read_fifo(hsep, hsreq) == 1)) + hsreq = NULL; + } + } + + if (hsreq) + list_add_tail(&hsreq->queue, &hsep->queue); + + spin_unlock_irqrestore(&hsudc->lock, flags); + return 0; +} + +/** + * s3c_hsudc_dequeue - Dequeue a transfer request from an endpoint. + * @_ep: Endpoint from which the request is dequeued. + * @_req: Request to be dequeued. + * + * Dequeue a request from a endpoint when called from gadget driver. + */ +static int s3c_hsudc_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct s3c_hsudc_ep *hsep = our_ep(_ep); + struct s3c_hsudc *hsudc = hsep->dev; + struct s3c_hsudc_req *hsreq = NULL, *iter; + unsigned long flags; + + hsep = our_ep(_ep); + if (!_ep || hsep->ep.name == ep0name) + return -EINVAL; + + spin_lock_irqsave(&hsudc->lock, flags); + + list_for_each_entry(iter, &hsep->queue, queue) { + if (&iter->req != _req) + continue; + hsreq = iter; + break; + } + if (!hsreq) { + spin_unlock_irqrestore(&hsudc->lock, flags); + return -EINVAL; + } + + set_index(hsudc, hsep->bEndpointAddress); + s3c_hsudc_complete_request(hsep, hsreq, -ECONNRESET); + + spin_unlock_irqrestore(&hsudc->lock, flags); + return 0; +} + +static const struct usb_ep_ops s3c_hsudc_ep_ops = { + .enable = s3c_hsudc_ep_enable, + .disable = s3c_hsudc_ep_disable, + .alloc_request = s3c_hsudc_alloc_request, + .free_request = s3c_hsudc_free_request, + .queue = s3c_hsudc_queue, + .dequeue = s3c_hsudc_dequeue, + .set_halt = s3c_hsudc_set_halt, + .set_wedge = s3c_hsudc_set_wedge, +}; + +/** + * s3c_hsudc_initep - Initialize a endpoint to default state. + * @hsudc - Reference to the device controller. + * @hsep - Endpoint to be initialized. + * @epnum - Address to be assigned to the endpoint. + * + * Initialize a endpoint with default configuration. + */ +static void s3c_hsudc_initep(struct s3c_hsudc *hsudc, + struct s3c_hsudc_ep *hsep, int epnum) +{ + char *dir; + + if ((epnum % 2) == 0) { + dir = "out"; + } else { + dir = "in"; + hsep->bEndpointAddress = USB_DIR_IN; + } + + hsep->bEndpointAddress |= epnum; + if (epnum) + snprintf(hsep->name, sizeof(hsep->name), "ep%d%s", epnum, dir); + else + snprintf(hsep->name, sizeof(hsep->name), "%s", ep0name); + + INIT_LIST_HEAD(&hsep->queue); + INIT_LIST_HEAD(&hsep->ep.ep_list); + if (epnum) + list_add_tail(&hsep->ep.ep_list, &hsudc->gadget.ep_list); + + hsep->dev = hsudc; + hsep->ep.name = hsep->name; + usb_ep_set_maxpacket_limit(&hsep->ep, epnum ? 512 : 64); + hsep->ep.ops = &s3c_hsudc_ep_ops; + hsep->fifo = hsudc->regs + S3C_BR(epnum); + hsep->ep.desc = NULL; + hsep->stopped = 0; + hsep->wedge = 0; + + if (epnum == 0) { + hsep->ep.caps.type_control = true; + hsep->ep.caps.dir_in = true; + hsep->ep.caps.dir_out = true; + } else { + hsep->ep.caps.type_iso = true; + hsep->ep.caps.type_bulk = true; + hsep->ep.caps.type_int = true; + } + + if (epnum & 1) + hsep->ep.caps.dir_in = true; + else + hsep->ep.caps.dir_out = true; + + set_index(hsudc, epnum); + writel(hsep->ep.maxpacket, hsudc->regs + S3C_MPR); +} + +/** + * s3c_hsudc_setup_ep - Configure all endpoints to default state. + * @hsudc: Reference to device controller. + * + * Configures all endpoints to default state. + */ +static void s3c_hsudc_setup_ep(struct s3c_hsudc *hsudc) +{ + int epnum; + + hsudc->ep0state = WAIT_FOR_SETUP; + INIT_LIST_HEAD(&hsudc->gadget.ep_list); + for (epnum = 0; epnum < hsudc->pd->epnum; epnum++) + s3c_hsudc_initep(hsudc, &hsudc->ep[epnum], epnum); +} + +/** + * s3c_hsudc_reconfig - Reconfigure the device controller to default state. + * @hsudc: Reference to device controller. + * + * Reconfigures the device controller registers to a default state. + */ +static void s3c_hsudc_reconfig(struct s3c_hsudc *hsudc) +{ + writel(0xAA, hsudc->regs + S3C_EDR); + writel(1, hsudc->regs + S3C_EIER); + writel(0, hsudc->regs + S3C_TR); + writel(S3C_SCR_DTZIEN_EN | S3C_SCR_RRD_EN | S3C_SCR_SUS_EN | + S3C_SCR_RST_EN, hsudc->regs + S3C_SCR); + writel(0, hsudc->regs + S3C_EP0CR); + + s3c_hsudc_setup_ep(hsudc); +} + +/** + * s3c_hsudc_irq - Interrupt handler for device controller. + * @irq: Not used. + * @_dev: Reference to the device controller. + * + * Interrupt handler for the device controller. This handler handles controller + * interrupts and endpoint interrupts. + */ +static irqreturn_t s3c_hsudc_irq(int irq, void *_dev) +{ + struct s3c_hsudc *hsudc = _dev; + struct s3c_hsudc_ep *hsep; + u32 ep_intr; + u32 sys_status; + u32 ep_idx; + + spin_lock(&hsudc->lock); + + sys_status = readl(hsudc->regs + S3C_SSR); + ep_intr = readl(hsudc->regs + S3C_EIR) & 0x3FF; + + if (!ep_intr && !(sys_status & S3C_SSR_DTZIEN_EN)) { + spin_unlock(&hsudc->lock); + return IRQ_HANDLED; + } + + if (sys_status) { + if (sys_status & S3C_SSR_VBUSON) + writel(S3C_SSR_VBUSON, hsudc->regs + S3C_SSR); + + if (sys_status & S3C_SSR_ERR) + writel(S3C_SSR_ERR, hsudc->regs + S3C_SSR); + + if (sys_status & S3C_SSR_SDE) { + writel(S3C_SSR_SDE, hsudc->regs + S3C_SSR); + hsudc->gadget.speed = (sys_status & S3C_SSR_HSP) ? + USB_SPEED_HIGH : USB_SPEED_FULL; + } + + if (sys_status & S3C_SSR_SUSPEND) { + writel(S3C_SSR_SUSPEND, hsudc->regs + S3C_SSR); + if (hsudc->gadget.speed != USB_SPEED_UNKNOWN + && hsudc->driver && hsudc->driver->suspend) + hsudc->driver->suspend(&hsudc->gadget); + } + + if (sys_status & S3C_SSR_RESUME) { + writel(S3C_SSR_RESUME, hsudc->regs + S3C_SSR); + if (hsudc->gadget.speed != USB_SPEED_UNKNOWN + && hsudc->driver && hsudc->driver->resume) + hsudc->driver->resume(&hsudc->gadget); + } + + if (sys_status & S3C_SSR_RESET) { + writel(S3C_SSR_RESET, hsudc->regs + S3C_SSR); + for (ep_idx = 0; ep_idx < hsudc->pd->epnum; ep_idx++) { + hsep = &hsudc->ep[ep_idx]; + hsep->stopped = 1; + s3c_hsudc_nuke_ep(hsep, -ECONNRESET); + } + s3c_hsudc_reconfig(hsudc); + hsudc->ep0state = WAIT_FOR_SETUP; + } + } + + if (ep_intr & S3C_EIR_EP0) { + writel(S3C_EIR_EP0, hsudc->regs + S3C_EIR); + set_index(hsudc, 0); + s3c_hsudc_handle_ep0_intr(hsudc); + } + + ep_intr >>= 1; + ep_idx = 1; + while (ep_intr) { + if (ep_intr & 1) { + hsep = &hsudc->ep[ep_idx]; + set_index(hsudc, ep_idx); + writel(1 << ep_idx, hsudc->regs + S3C_EIR); + if (ep_is_in(hsep)) + s3c_hsudc_epin_intr(hsudc, ep_idx); + else + s3c_hsudc_epout_intr(hsudc, ep_idx); + } + ep_intr >>= 1; + ep_idx++; + } + + spin_unlock(&hsudc->lock); + return IRQ_HANDLED; +} + +static int s3c_hsudc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct s3c_hsudc *hsudc = to_hsudc(gadget); + int ret; + + if (!driver + || driver->max_speed < USB_SPEED_FULL + || !driver->setup) + return -EINVAL; + + if (!hsudc) + return -ENODEV; + + if (hsudc->driver) + return -EBUSY; + + hsudc->driver = driver; + + ret = regulator_bulk_enable(ARRAY_SIZE(hsudc->supplies), + hsudc->supplies); + if (ret != 0) { + dev_err(hsudc->dev, "failed to enable supplies: %d\n", ret); + goto err_supplies; + } + + /* connect to bus through transceiver */ + if (!IS_ERR_OR_NULL(hsudc->transceiver)) { + ret = otg_set_peripheral(hsudc->transceiver->otg, + &hsudc->gadget); + if (ret) { + dev_err(hsudc->dev, "%s: can't bind to transceiver\n", + hsudc->gadget.name); + goto err_otg; + } + } + + enable_irq(hsudc->irq); + s3c_hsudc_reconfig(hsudc); + + pm_runtime_get_sync(hsudc->dev); + + if (hsudc->pd->phy_init) + hsudc->pd->phy_init(); + if (hsudc->pd->gpio_init) + hsudc->pd->gpio_init(); + + return 0; +err_otg: + regulator_bulk_disable(ARRAY_SIZE(hsudc->supplies), hsudc->supplies); +err_supplies: + hsudc->driver = NULL; + return ret; +} + +static int s3c_hsudc_stop(struct usb_gadget *gadget) +{ + struct s3c_hsudc *hsudc = to_hsudc(gadget); + unsigned long flags; + + if (!hsudc) + return -ENODEV; + + spin_lock_irqsave(&hsudc->lock, flags); + hsudc->gadget.speed = USB_SPEED_UNKNOWN; + if (hsudc->pd->phy_uninit) + hsudc->pd->phy_uninit(); + + pm_runtime_put(hsudc->dev); + + if (hsudc->pd->gpio_uninit) + hsudc->pd->gpio_uninit(); + s3c_hsudc_stop_activity(hsudc); + spin_unlock_irqrestore(&hsudc->lock, flags); + + if (!IS_ERR_OR_NULL(hsudc->transceiver)) + (void) otg_set_peripheral(hsudc->transceiver->otg, NULL); + + disable_irq(hsudc->irq); + + regulator_bulk_disable(ARRAY_SIZE(hsudc->supplies), hsudc->supplies); + hsudc->driver = NULL; + + return 0; +} + +static inline u32 s3c_hsudc_read_frameno(struct s3c_hsudc *hsudc) +{ + return readl(hsudc->regs + S3C_FNR) & 0x3FF; +} + +static int s3c_hsudc_gadget_getframe(struct usb_gadget *gadget) +{ + return s3c_hsudc_read_frameno(to_hsudc(gadget)); +} + +static int s3c_hsudc_vbus_draw(struct usb_gadget *gadget, unsigned mA) +{ + struct s3c_hsudc *hsudc = to_hsudc(gadget); + + if (!hsudc) + return -ENODEV; + + if (!IS_ERR_OR_NULL(hsudc->transceiver)) + return usb_phy_set_power(hsudc->transceiver, mA); + + return -EOPNOTSUPP; +} + +static const struct usb_gadget_ops s3c_hsudc_gadget_ops = { + .get_frame = s3c_hsudc_gadget_getframe, + .udc_start = s3c_hsudc_start, + .udc_stop = s3c_hsudc_stop, + .vbus_draw = s3c_hsudc_vbus_draw, +}; + +static int s3c_hsudc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct s3c_hsudc *hsudc; + struct s3c24xx_hsudc_platdata *pd = dev_get_platdata(&pdev->dev); + int ret, i; + + hsudc = devm_kzalloc(&pdev->dev, struct_size(hsudc, ep, pd->epnum), + GFP_KERNEL); + if (!hsudc) + return -ENOMEM; + + platform_set_drvdata(pdev, dev); + hsudc->dev = dev; + hsudc->pd = dev_get_platdata(&pdev->dev); + + hsudc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); + + for (i = 0; i < ARRAY_SIZE(hsudc->supplies); i++) + hsudc->supplies[i].supply = s3c_hsudc_supply_names[i]; + + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(hsudc->supplies), + hsudc->supplies); + if (ret != 0) { + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to request supplies: %d\n", ret); + goto err_supplies; + } + + hsudc->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(hsudc->regs)) { + ret = PTR_ERR(hsudc->regs); + goto err_res; + } + + spin_lock_init(&hsudc->lock); + + hsudc->gadget.max_speed = USB_SPEED_HIGH; + hsudc->gadget.ops = &s3c_hsudc_gadget_ops; + hsudc->gadget.name = dev_name(dev); + hsudc->gadget.ep0 = &hsudc->ep[0].ep; + hsudc->gadget.is_otg = 0; + hsudc->gadget.is_a_peripheral = 0; + hsudc->gadget.speed = USB_SPEED_UNKNOWN; + + s3c_hsudc_setup_ep(hsudc); + + ret = platform_get_irq(pdev, 0); + if (ret < 0) + goto err_res; + hsudc->irq = ret; + + ret = devm_request_irq(&pdev->dev, hsudc->irq, s3c_hsudc_irq, 0, + driver_name, hsudc); + if (ret < 0) { + dev_err(dev, "irq request failed\n"); + goto err_res; + } + + hsudc->uclk = devm_clk_get(&pdev->dev, "usb-device"); + if (IS_ERR(hsudc->uclk)) { + dev_err(dev, "failed to find usb-device clock source\n"); + ret = PTR_ERR(hsudc->uclk); + goto err_res; + } + clk_enable(hsudc->uclk); + + local_irq_disable(); + + disable_irq(hsudc->irq); + local_irq_enable(); + + ret = usb_add_gadget_udc(&pdev->dev, &hsudc->gadget); + if (ret) + goto err_add_udc; + + pm_runtime_enable(dev); + + return 0; +err_add_udc: + clk_disable(hsudc->uclk); +err_res: + if (!IS_ERR_OR_NULL(hsudc->transceiver)) + usb_put_phy(hsudc->transceiver); + +err_supplies: + return ret; +} + +static struct platform_driver s3c_hsudc_driver = { + .driver = { + .name = "s3c-hsudc", + }, + .probe = s3c_hsudc_probe, +}; + +module_platform_driver(s3c_hsudc_driver); + +MODULE_DESCRIPTION("Samsung S3C24XX USB high-speed controller driver"); +MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:s3c-hsudc"); diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c new file mode 100644 index 000000000..8c57b191e --- /dev/null +++ b/drivers/usb/gadget/udc/s3c2410_udc.c @@ -0,0 +1,1980 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * linux/drivers/usb/gadget/s3c2410_udc.c + * + * Samsung S3C24xx series on-chip full speed USB device controllers + * + * Copyright (C) 2004-2007 Herbert Pötzl - Arnaud Patard + * Additional cleanups by Ben Dooks <ben-linux@fluff.org> + */ + +#define pr_fmt(fmt) "s3c2410_udc: " fmt + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/gpio/consumer.h> +#include <linux/prefetch.h> +#include <linux/io.h> + +#include <linux/debugfs.h> +#include <linux/seq_file.h> + +#include <linux/usb.h> +#include <linux/usb/gadget.h> + +#include <asm/byteorder.h> +#include <asm/irq.h> +#include <asm/unaligned.h> + +#include <linux/platform_data/usb-s3c2410_udc.h> + +#include "s3c2410_udc.h" +#include "s3c2410_udc_regs.h" + +#define DRIVER_DESC "S3C2410 USB Device Controller Gadget" +#define DRIVER_AUTHOR "Herbert Pötzl <herbert@13thfloor.at>, " \ + "Arnaud Patard <arnaud.patard@rtp-net.org>" + +static const char gadget_name[] = "s3c2410_udc"; +static const char driver_desc[] = DRIVER_DESC; + +static struct s3c2410_udc *the_controller; +static struct clk *udc_clock; +static struct clk *usb_bus_clock; +static void __iomem *base_addr; +static int irq_usbd; +static struct dentry *s3c2410_udc_debugfs_root; + +static inline u32 udc_read(u32 reg) +{ + return readb(base_addr + reg); +} + +static inline void udc_write(u32 value, u32 reg) +{ + writeb(value, base_addr + reg); +} + +static inline void udc_writeb(void __iomem *base, u32 value, u32 reg) +{ + writeb(value, base + reg); +} + +static struct s3c2410_udc_mach_info *udc_info; + +/*************************** DEBUG FUNCTION ***************************/ +#define DEBUG_NORMAL 1 +#define DEBUG_VERBOSE 2 + +#ifdef CONFIG_USB_S3C2410_DEBUG +#define USB_S3C2410_DEBUG_LEVEL 0 + +static uint32_t s3c2410_ticks = 0; + +__printf(2, 3) +static void dprintk(int level, const char *fmt, ...) +{ + static long prevticks; + static int invocation; + struct va_format vaf; + va_list args; + + if (level > USB_S3C2410_DEBUG_LEVEL) + return; + + va_start(args, fmt); + + vaf.fmt = fmt; + vaf.va = &args; + + if (s3c2410_ticks != prevticks) { + prevticks = s3c2410_ticks; + invocation = 0; + } + + pr_debug("%1lu.%02d USB: %pV", prevticks, invocation++, &vaf); + + va_end(args); +} +#else +__printf(2, 3) +static void dprintk(int level, const char *fmt, ...) +{ +} +#endif + +static int s3c2410_udc_debugfs_show(struct seq_file *m, void *p) +{ + u32 addr_reg, pwr_reg, ep_int_reg, usb_int_reg; + u32 ep_int_en_reg, usb_int_en_reg, ep0_csr; + u32 ep1_i_csr1, ep1_i_csr2, ep1_o_csr1, ep1_o_csr2; + u32 ep2_i_csr1, ep2_i_csr2, ep2_o_csr1, ep2_o_csr2; + + addr_reg = udc_read(S3C2410_UDC_FUNC_ADDR_REG); + pwr_reg = udc_read(S3C2410_UDC_PWR_REG); + ep_int_reg = udc_read(S3C2410_UDC_EP_INT_REG); + usb_int_reg = udc_read(S3C2410_UDC_USB_INT_REG); + ep_int_en_reg = udc_read(S3C2410_UDC_EP_INT_EN_REG); + usb_int_en_reg = udc_read(S3C2410_UDC_USB_INT_EN_REG); + udc_write(0, S3C2410_UDC_INDEX_REG); + ep0_csr = udc_read(S3C2410_UDC_IN_CSR1_REG); + udc_write(1, S3C2410_UDC_INDEX_REG); + ep1_i_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG); + ep1_i_csr2 = udc_read(S3C2410_UDC_IN_CSR2_REG); + ep1_o_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG); + ep1_o_csr2 = udc_read(S3C2410_UDC_IN_CSR2_REG); + udc_write(2, S3C2410_UDC_INDEX_REG); + ep2_i_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG); + ep2_i_csr2 = udc_read(S3C2410_UDC_IN_CSR2_REG); + ep2_o_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG); + ep2_o_csr2 = udc_read(S3C2410_UDC_IN_CSR2_REG); + + seq_printf(m, "FUNC_ADDR_REG : 0x%04X\n" + "PWR_REG : 0x%04X\n" + "EP_INT_REG : 0x%04X\n" + "USB_INT_REG : 0x%04X\n" + "EP_INT_EN_REG : 0x%04X\n" + "USB_INT_EN_REG : 0x%04X\n" + "EP0_CSR : 0x%04X\n" + "EP1_I_CSR1 : 0x%04X\n" + "EP1_I_CSR2 : 0x%04X\n" + "EP1_O_CSR1 : 0x%04X\n" + "EP1_O_CSR2 : 0x%04X\n" + "EP2_I_CSR1 : 0x%04X\n" + "EP2_I_CSR2 : 0x%04X\n" + "EP2_O_CSR1 : 0x%04X\n" + "EP2_O_CSR2 : 0x%04X\n", + addr_reg, pwr_reg, ep_int_reg, usb_int_reg, + ep_int_en_reg, usb_int_en_reg, ep0_csr, + ep1_i_csr1, ep1_i_csr2, ep1_o_csr1, ep1_o_csr2, + ep2_i_csr1, ep2_i_csr2, ep2_o_csr1, ep2_o_csr2 + ); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(s3c2410_udc_debugfs); + +/* io macros */ + +static inline void s3c2410_udc_clear_ep0_opr(void __iomem *base) +{ + udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); + udc_writeb(base, S3C2410_UDC_EP0_CSR_SOPKTRDY, + S3C2410_UDC_EP0_CSR_REG); +} + +static inline void s3c2410_udc_clear_ep0_sst(void __iomem *base) +{ + udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); + writeb(0x00, base + S3C2410_UDC_EP0_CSR_REG); +} + +static inline void s3c2410_udc_clear_ep0_se(void __iomem *base) +{ + udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); + udc_writeb(base, S3C2410_UDC_EP0_CSR_SSE, S3C2410_UDC_EP0_CSR_REG); +} + +static inline void s3c2410_udc_set_ep0_ipr(void __iomem *base) +{ + udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); + udc_writeb(base, S3C2410_UDC_EP0_CSR_IPKRDY, S3C2410_UDC_EP0_CSR_REG); +} + +static inline void s3c2410_udc_set_ep0_de(void __iomem *base) +{ + udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); + udc_writeb(base, S3C2410_UDC_EP0_CSR_DE, S3C2410_UDC_EP0_CSR_REG); +} + +static inline void s3c2410_udc_set_ep0_ss(void __iomem *b) +{ + udc_writeb(b, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); + udc_writeb(b, S3C2410_UDC_EP0_CSR_SENDSTL, S3C2410_UDC_EP0_CSR_REG); +} + +static inline void s3c2410_udc_set_ep0_de_out(void __iomem *base) +{ + udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); + + udc_writeb(base, (S3C2410_UDC_EP0_CSR_SOPKTRDY + | S3C2410_UDC_EP0_CSR_DE), + S3C2410_UDC_EP0_CSR_REG); +} + +static inline void s3c2410_udc_set_ep0_de_in(void __iomem *base) +{ + udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); + udc_writeb(base, (S3C2410_UDC_EP0_CSR_IPKRDY + | S3C2410_UDC_EP0_CSR_DE), + S3C2410_UDC_EP0_CSR_REG); +} + +/*------------------------- I/O ----------------------------------*/ + +/* + * s3c2410_udc_done + */ +static void s3c2410_udc_done(struct s3c2410_ep *ep, + struct s3c2410_request *req, int status) +{ + unsigned halted = ep->halted; + + list_del_init(&req->queue); + + if (likely(req->req.status == -EINPROGRESS)) + req->req.status = status; + else + status = req->req.status; + + ep->halted = 1; + usb_gadget_giveback_request(&ep->ep, &req->req); + ep->halted = halted; +} + +static void s3c2410_udc_nuke(struct s3c2410_udc *udc, + struct s3c2410_ep *ep, int status) +{ + while (!list_empty(&ep->queue)) { + struct s3c2410_request *req; + req = list_entry(ep->queue.next, struct s3c2410_request, + queue); + s3c2410_udc_done(ep, req, status); + } +} + +static inline int s3c2410_udc_fifo_count_out(void) +{ + int tmp; + + tmp = udc_read(S3C2410_UDC_OUT_FIFO_CNT2_REG) << 8; + tmp |= udc_read(S3C2410_UDC_OUT_FIFO_CNT1_REG); + return tmp; +} + +/* + * s3c2410_udc_write_packet + */ +static inline int s3c2410_udc_write_packet(int fifo, + struct s3c2410_request *req, + unsigned max) +{ + unsigned len = min(req->req.length - req->req.actual, max); + u8 *buf = req->req.buf + req->req.actual; + + prefetch(buf); + + dprintk(DEBUG_VERBOSE, "%s %d %d %d %d\n", __func__, + req->req.actual, req->req.length, len, req->req.actual + len); + + req->req.actual += len; + + udelay(5); + writesb(base_addr + fifo, buf, len); + return len; +} + +/* + * s3c2410_udc_write_fifo + * + * return: 0 = still running, 1 = completed, negative = errno + */ +static int s3c2410_udc_write_fifo(struct s3c2410_ep *ep, + struct s3c2410_request *req) +{ + unsigned count; + int is_last; + u32 idx; + int fifo_reg; + u32 ep_csr; + + idx = ep->bEndpointAddress & 0x7F; + switch (idx) { + default: + idx = 0; + fallthrough; + case 0: + fifo_reg = S3C2410_UDC_EP0_FIFO_REG; + break; + case 1: + fifo_reg = S3C2410_UDC_EP1_FIFO_REG; + break; + case 2: + fifo_reg = S3C2410_UDC_EP2_FIFO_REG; + break; + case 3: + fifo_reg = S3C2410_UDC_EP3_FIFO_REG; + break; + case 4: + fifo_reg = S3C2410_UDC_EP4_FIFO_REG; + break; + } + + count = s3c2410_udc_write_packet(fifo_reg, req, ep->ep.maxpacket); + + /* last packet is often short (sometimes a zlp) */ + if (count != ep->ep.maxpacket) + is_last = 1; + else if (req->req.length != req->req.actual || req->req.zero) + is_last = 0; + else + is_last = 2; + + /* Only ep0 debug messages are interesting */ + if (idx == 0) + dprintk(DEBUG_NORMAL, + "Written ep%d %d.%d of %d b [last %d,z %d]\n", + idx, count, req->req.actual, req->req.length, + is_last, req->req.zero); + + if (is_last) { + /* The order is important. It prevents sending 2 packets + * at the same time */ + + if (idx == 0) { + /* Reset signal => no need to say 'data sent' */ + if (!(udc_read(S3C2410_UDC_USB_INT_REG) + & S3C2410_UDC_USBINT_RESET)) + s3c2410_udc_set_ep0_de_in(base_addr); + ep->dev->ep0state = EP0_IDLE; + } else { + udc_write(idx, S3C2410_UDC_INDEX_REG); + ep_csr = udc_read(S3C2410_UDC_IN_CSR1_REG); + udc_write(idx, S3C2410_UDC_INDEX_REG); + udc_write(ep_csr | S3C2410_UDC_ICSR1_PKTRDY, + S3C2410_UDC_IN_CSR1_REG); + } + + s3c2410_udc_done(ep, req, 0); + is_last = 1; + } else { + if (idx == 0) { + /* Reset signal => no need to say 'data sent' */ + if (!(udc_read(S3C2410_UDC_USB_INT_REG) + & S3C2410_UDC_USBINT_RESET)) + s3c2410_udc_set_ep0_ipr(base_addr); + } else { + udc_write(idx, S3C2410_UDC_INDEX_REG); + ep_csr = udc_read(S3C2410_UDC_IN_CSR1_REG); + udc_write(idx, S3C2410_UDC_INDEX_REG); + udc_write(ep_csr | S3C2410_UDC_ICSR1_PKTRDY, + S3C2410_UDC_IN_CSR1_REG); + } + } + + return is_last; +} + +static inline int s3c2410_udc_read_packet(int fifo, u8 *buf, + struct s3c2410_request *req, unsigned avail) +{ + unsigned len; + + len = min(req->req.length - req->req.actual, avail); + req->req.actual += len; + + readsb(fifo + base_addr, buf, len); + return len; +} + +/* + * return: 0 = still running, 1 = queue empty, negative = errno + */ +static int s3c2410_udc_read_fifo(struct s3c2410_ep *ep, + struct s3c2410_request *req) +{ + u8 *buf; + u32 ep_csr; + unsigned bufferspace; + int is_last = 1; + unsigned avail; + int fifo_count = 0; + u32 idx; + int fifo_reg; + + idx = ep->bEndpointAddress & 0x7F; + + switch (idx) { + default: + idx = 0; + fallthrough; + case 0: + fifo_reg = S3C2410_UDC_EP0_FIFO_REG; + break; + case 1: + fifo_reg = S3C2410_UDC_EP1_FIFO_REG; + break; + case 2: + fifo_reg = S3C2410_UDC_EP2_FIFO_REG; + break; + case 3: + fifo_reg = S3C2410_UDC_EP3_FIFO_REG; + break; + case 4: + fifo_reg = S3C2410_UDC_EP4_FIFO_REG; + break; + } + + if (!req->req.length) + return 1; + + buf = req->req.buf + req->req.actual; + bufferspace = req->req.length - req->req.actual; + if (!bufferspace) { + dprintk(DEBUG_NORMAL, "%s: buffer full!\n", __func__); + return -1; + } + + udc_write(idx, S3C2410_UDC_INDEX_REG); + + fifo_count = s3c2410_udc_fifo_count_out(); + dprintk(DEBUG_NORMAL, "%s fifo count : %d\n", __func__, fifo_count); + + if (fifo_count > ep->ep.maxpacket) + avail = ep->ep.maxpacket; + else + avail = fifo_count; + + fifo_count = s3c2410_udc_read_packet(fifo_reg, buf, req, avail); + + /* checking this with ep0 is not accurate as we already + * read a control request + **/ + if (idx != 0 && fifo_count < ep->ep.maxpacket) { + is_last = 1; + /* overflowed this request? flush extra data */ + if (fifo_count != avail) + req->req.status = -EOVERFLOW; + } else { + is_last = (req->req.length <= req->req.actual) ? 1 : 0; + } + + udc_write(idx, S3C2410_UDC_INDEX_REG); + fifo_count = s3c2410_udc_fifo_count_out(); + + /* Only ep0 debug messages are interesting */ + if (idx == 0) + dprintk(DEBUG_VERBOSE, "%s fifo count : %d [last %d]\n", + __func__, fifo_count, is_last); + + if (is_last) { + if (idx == 0) { + s3c2410_udc_set_ep0_de_out(base_addr); + ep->dev->ep0state = EP0_IDLE; + } else { + udc_write(idx, S3C2410_UDC_INDEX_REG); + ep_csr = udc_read(S3C2410_UDC_OUT_CSR1_REG); + udc_write(idx, S3C2410_UDC_INDEX_REG); + udc_write(ep_csr & ~S3C2410_UDC_OCSR1_PKTRDY, + S3C2410_UDC_OUT_CSR1_REG); + } + + s3c2410_udc_done(ep, req, 0); + } else { + if (idx == 0) { + s3c2410_udc_clear_ep0_opr(base_addr); + } else { + udc_write(idx, S3C2410_UDC_INDEX_REG); + ep_csr = udc_read(S3C2410_UDC_OUT_CSR1_REG); + udc_write(idx, S3C2410_UDC_INDEX_REG); + udc_write(ep_csr & ~S3C2410_UDC_OCSR1_PKTRDY, + S3C2410_UDC_OUT_CSR1_REG); + } + } + + return is_last; +} + +static int s3c2410_udc_read_fifo_crq(struct usb_ctrlrequest *crq) +{ + unsigned char *outbuf = (unsigned char *)crq; + int bytes_read = 0; + + udc_write(0, S3C2410_UDC_INDEX_REG); + + bytes_read = s3c2410_udc_fifo_count_out(); + + dprintk(DEBUG_NORMAL, "%s: fifo_count=%d\n", __func__, bytes_read); + + if (bytes_read > sizeof(struct usb_ctrlrequest)) + bytes_read = sizeof(struct usb_ctrlrequest); + + readsb(S3C2410_UDC_EP0_FIFO_REG + base_addr, outbuf, bytes_read); + + dprintk(DEBUG_VERBOSE, "%s: len=%d %02x:%02x {%x,%x,%x}\n", __func__, + bytes_read, crq->bRequest, crq->bRequestType, + crq->wValue, crq->wIndex, crq->wLength); + + return bytes_read; +} + +static int s3c2410_udc_get_status(struct s3c2410_udc *dev, + struct usb_ctrlrequest *crq) +{ + u16 status = 0; + u8 ep_num = crq->wIndex & 0x7F; + u8 is_in = crq->wIndex & USB_DIR_IN; + + switch (crq->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_INTERFACE: + break; + + case USB_RECIP_DEVICE: + status = dev->devstatus; + break; + + case USB_RECIP_ENDPOINT: + if (ep_num > 4 || crq->wLength > 2) + return 1; + + if (ep_num == 0) { + udc_write(0, S3C2410_UDC_INDEX_REG); + status = udc_read(S3C2410_UDC_IN_CSR1_REG); + status = status & S3C2410_UDC_EP0_CSR_SENDSTL; + } else { + udc_write(ep_num, S3C2410_UDC_INDEX_REG); + if (is_in) { + status = udc_read(S3C2410_UDC_IN_CSR1_REG); + status = status & S3C2410_UDC_ICSR1_SENDSTL; + } else { + status = udc_read(S3C2410_UDC_OUT_CSR1_REG); + status = status & S3C2410_UDC_OCSR1_SENDSTL; + } + } + + status = status ? 1 : 0; + break; + + default: + return 1; + } + + /* Seems to be needed to get it working. ouch :( */ + udelay(5); + udc_write(status & 0xFF, S3C2410_UDC_EP0_FIFO_REG); + udc_write(status >> 8, S3C2410_UDC_EP0_FIFO_REG); + s3c2410_udc_set_ep0_de_in(base_addr); + + return 0; +} +/*------------------------- usb state machine -------------------------------*/ +static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value); + +static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev, + struct s3c2410_ep *ep, + struct usb_ctrlrequest *crq, + u32 ep0csr) +{ + int len, ret, tmp; + + /* start control request? */ + if (!(ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY)) + return; + + s3c2410_udc_nuke(dev, ep, -EPROTO); + + len = s3c2410_udc_read_fifo_crq(crq); + if (len != sizeof(*crq)) { + dprintk(DEBUG_NORMAL, "setup begin: fifo READ ERROR" + " wanted %d bytes got %d. Stalling out...\n", + sizeof(*crq), len); + s3c2410_udc_set_ep0_ss(base_addr); + return; + } + + dprintk(DEBUG_NORMAL, "bRequest = %d bRequestType %d wLength = %d\n", + crq->bRequest, crq->bRequestType, crq->wLength); + + /* cope with automagic for some standard requests. */ + dev->req_std = (crq->bRequestType & USB_TYPE_MASK) + == USB_TYPE_STANDARD; + dev->req_config = 0; + dev->req_pending = 1; + + switch (crq->bRequest) { + case USB_REQ_SET_CONFIGURATION: + dprintk(DEBUG_NORMAL, "USB_REQ_SET_CONFIGURATION ...\n"); + + if (crq->bRequestType == USB_RECIP_DEVICE) { + dev->req_config = 1; + s3c2410_udc_set_ep0_de_out(base_addr); + } + break; + + case USB_REQ_SET_INTERFACE: + dprintk(DEBUG_NORMAL, "USB_REQ_SET_INTERFACE ...\n"); + + if (crq->bRequestType == USB_RECIP_INTERFACE) { + dev->req_config = 1; + s3c2410_udc_set_ep0_de_out(base_addr); + } + break; + + case USB_REQ_SET_ADDRESS: + dprintk(DEBUG_NORMAL, "USB_REQ_SET_ADDRESS ...\n"); + + if (crq->bRequestType == USB_RECIP_DEVICE) { + tmp = crq->wValue & 0x7F; + dev->address = tmp; + udc_write((tmp | S3C2410_UDC_FUNCADDR_UPDATE), + S3C2410_UDC_FUNC_ADDR_REG); + s3c2410_udc_set_ep0_de_out(base_addr); + return; + } + break; + + case USB_REQ_GET_STATUS: + dprintk(DEBUG_NORMAL, "USB_REQ_GET_STATUS ...\n"); + s3c2410_udc_clear_ep0_opr(base_addr); + + if (dev->req_std) { + if (!s3c2410_udc_get_status(dev, crq)) + return; + } + break; + + case USB_REQ_CLEAR_FEATURE: + s3c2410_udc_clear_ep0_opr(base_addr); + + if (crq->bRequestType != USB_RECIP_ENDPOINT) + break; + + if (crq->wValue != USB_ENDPOINT_HALT || crq->wLength != 0) + break; + + s3c2410_udc_set_halt(&dev->ep[crq->wIndex & 0x7f].ep, 0); + s3c2410_udc_set_ep0_de_out(base_addr); + return; + + case USB_REQ_SET_FEATURE: + s3c2410_udc_clear_ep0_opr(base_addr); + + if (crq->bRequestType != USB_RECIP_ENDPOINT) + break; + + if (crq->wValue != USB_ENDPOINT_HALT || crq->wLength != 0) + break; + + s3c2410_udc_set_halt(&dev->ep[crq->wIndex & 0x7f].ep, 1); + s3c2410_udc_set_ep0_de_out(base_addr); + return; + + default: + s3c2410_udc_clear_ep0_opr(base_addr); + break; + } + + if (crq->bRequestType & USB_DIR_IN) + dev->ep0state = EP0_IN_DATA_PHASE; + else + dev->ep0state = EP0_OUT_DATA_PHASE; + + if (!dev->driver) + return; + + /* deliver the request to the gadget driver */ + ret = dev->driver->setup(&dev->gadget, crq); + if (ret < 0) { + if (dev->req_config) { + dprintk(DEBUG_NORMAL, "config change %02x fail %d?\n", + crq->bRequest, ret); + return; + } + + if (ret == -EOPNOTSUPP) + dprintk(DEBUG_NORMAL, "Operation not supported\n"); + else + dprintk(DEBUG_NORMAL, + "dev->driver->setup failed. (%d)\n", ret); + + udelay(5); + s3c2410_udc_set_ep0_ss(base_addr); + s3c2410_udc_set_ep0_de_out(base_addr); + dev->ep0state = EP0_IDLE; + /* deferred i/o == no response yet */ + } else if (dev->req_pending) { + dprintk(DEBUG_VERBOSE, "dev->req_pending... what now?\n"); + dev->req_pending = 0; + } + + dprintk(DEBUG_VERBOSE, "ep0state %s\n", ep0states[dev->ep0state]); +} + +static void s3c2410_udc_handle_ep0(struct s3c2410_udc *dev) +{ + u32 ep0csr; + struct s3c2410_ep *ep = &dev->ep[0]; + struct s3c2410_request *req; + struct usb_ctrlrequest crq; + + if (list_empty(&ep->queue)) + req = NULL; + else + req = list_entry(ep->queue.next, struct s3c2410_request, queue); + + /* We make the assumption that S3C2410_UDC_IN_CSR1_REG equal to + * S3C2410_UDC_EP0_CSR_REG when index is zero */ + + udc_write(0, S3C2410_UDC_INDEX_REG); + ep0csr = udc_read(S3C2410_UDC_IN_CSR1_REG); + + dprintk(DEBUG_NORMAL, "ep0csr %x ep0state %s\n", + ep0csr, ep0states[dev->ep0state]); + + /* clear stall status */ + if (ep0csr & S3C2410_UDC_EP0_CSR_SENTSTL) { + s3c2410_udc_nuke(dev, ep, -EPIPE); + dprintk(DEBUG_NORMAL, "... clear SENT_STALL ...\n"); + s3c2410_udc_clear_ep0_sst(base_addr); + dev->ep0state = EP0_IDLE; + return; + } + + /* clear setup end */ + if (ep0csr & S3C2410_UDC_EP0_CSR_SE) { + dprintk(DEBUG_NORMAL, "... serviced SETUP_END ...\n"); + s3c2410_udc_nuke(dev, ep, 0); + s3c2410_udc_clear_ep0_se(base_addr); + dev->ep0state = EP0_IDLE; + } + + switch (dev->ep0state) { + case EP0_IDLE: + s3c2410_udc_handle_ep0_idle(dev, ep, &crq, ep0csr); + break; + + case EP0_IN_DATA_PHASE: /* GET_DESCRIPTOR etc */ + dprintk(DEBUG_NORMAL, "EP0_IN_DATA_PHASE ... what now?\n"); + if (!(ep0csr & S3C2410_UDC_EP0_CSR_IPKRDY) && req) + s3c2410_udc_write_fifo(ep, req); + break; + + case EP0_OUT_DATA_PHASE: /* SET_DESCRIPTOR etc */ + dprintk(DEBUG_NORMAL, "EP0_OUT_DATA_PHASE ... what now?\n"); + if ((ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY) && req) + s3c2410_udc_read_fifo(ep, req); + break; + + case EP0_END_XFER: + dprintk(DEBUG_NORMAL, "EP0_END_XFER ... what now?\n"); + dev->ep0state = EP0_IDLE; + break; + + case EP0_STALL: + dprintk(DEBUG_NORMAL, "EP0_STALL ... what now?\n"); + dev->ep0state = EP0_IDLE; + break; + } +} + +/* + * handle_ep - Manage I/O endpoints + */ + +static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep) +{ + struct s3c2410_request *req; + int is_in = ep->bEndpointAddress & USB_DIR_IN; + u32 ep_csr1; + u32 idx; + + if (likely(!list_empty(&ep->queue))) + req = list_entry(ep->queue.next, + struct s3c2410_request, queue); + else + req = NULL; + + idx = ep->bEndpointAddress & 0x7F; + + if (is_in) { + udc_write(idx, S3C2410_UDC_INDEX_REG); + ep_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG); + dprintk(DEBUG_VERBOSE, "ep%01d write csr:%02x %d\n", + idx, ep_csr1, req ? 1 : 0); + + if (ep_csr1 & S3C2410_UDC_ICSR1_SENTSTL) { + dprintk(DEBUG_VERBOSE, "st\n"); + udc_write(idx, S3C2410_UDC_INDEX_REG); + udc_write(ep_csr1 & ~S3C2410_UDC_ICSR1_SENTSTL, + S3C2410_UDC_IN_CSR1_REG); + return; + } + + if (!(ep_csr1 & S3C2410_UDC_ICSR1_PKTRDY) && req) + s3c2410_udc_write_fifo(ep, req); + } else { + udc_write(idx, S3C2410_UDC_INDEX_REG); + ep_csr1 = udc_read(S3C2410_UDC_OUT_CSR1_REG); + dprintk(DEBUG_VERBOSE, "ep%01d rd csr:%02x\n", idx, ep_csr1); + + if (ep_csr1 & S3C2410_UDC_OCSR1_SENTSTL) { + udc_write(idx, S3C2410_UDC_INDEX_REG); + udc_write(ep_csr1 & ~S3C2410_UDC_OCSR1_SENTSTL, + S3C2410_UDC_OUT_CSR1_REG); + return; + } + + if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && req) + s3c2410_udc_read_fifo(ep, req); + } +} + +/* + * s3c2410_udc_irq - interrupt handler + */ +static irqreturn_t s3c2410_udc_irq(int dummy, void *_dev) +{ + struct s3c2410_udc *dev = _dev; + int usb_status; + int usbd_status; + int pwr_reg; + int ep0csr; + int i; + u32 idx, idx2; + unsigned long flags; + + spin_lock_irqsave(&dev->lock, flags); + + /* Driver connected ? */ + if (!dev->driver) { + /* Clear interrupts */ + udc_write(udc_read(S3C2410_UDC_USB_INT_REG), + S3C2410_UDC_USB_INT_REG); + udc_write(udc_read(S3C2410_UDC_EP_INT_REG), + S3C2410_UDC_EP_INT_REG); + } + + /* Save index */ + idx = udc_read(S3C2410_UDC_INDEX_REG); + + /* Read status registers */ + usb_status = udc_read(S3C2410_UDC_USB_INT_REG); + usbd_status = udc_read(S3C2410_UDC_EP_INT_REG); + pwr_reg = udc_read(S3C2410_UDC_PWR_REG); + + udc_writeb(base_addr, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); + ep0csr = udc_read(S3C2410_UDC_IN_CSR1_REG); + + dprintk(DEBUG_NORMAL, "usbs=%02x, usbds=%02x, pwr=%02x ep0csr=%02x\n", + usb_status, usbd_status, pwr_reg, ep0csr); + + /* + * Now, handle interrupts. There's two types : + * - Reset, Resume, Suspend coming -> usb_int_reg + * - EP -> ep_int_reg + */ + + /* RESET */ + if (usb_status & S3C2410_UDC_USBINT_RESET) { + /* two kind of reset : + * - reset start -> pwr reg = 8 + * - reset end -> pwr reg = 0 + **/ + dprintk(DEBUG_NORMAL, "USB reset csr %x pwr %x\n", + ep0csr, pwr_reg); + + dev->gadget.speed = USB_SPEED_UNKNOWN; + udc_write(0x00, S3C2410_UDC_INDEX_REG); + udc_write((dev->ep[0].ep.maxpacket & 0x7ff) >> 3, + S3C2410_UDC_MAXP_REG); + dev->address = 0; + + dev->ep0state = EP0_IDLE; + dev->gadget.speed = USB_SPEED_FULL; + + /* clear interrupt */ + udc_write(S3C2410_UDC_USBINT_RESET, + S3C2410_UDC_USB_INT_REG); + + udc_write(idx, S3C2410_UDC_INDEX_REG); + spin_unlock_irqrestore(&dev->lock, flags); + return IRQ_HANDLED; + } + + /* RESUME */ + if (usb_status & S3C2410_UDC_USBINT_RESUME) { + dprintk(DEBUG_NORMAL, "USB resume\n"); + + /* clear interrupt */ + udc_write(S3C2410_UDC_USBINT_RESUME, + S3C2410_UDC_USB_INT_REG); + + if (dev->gadget.speed != USB_SPEED_UNKNOWN + && dev->driver + && dev->driver->resume) + dev->driver->resume(&dev->gadget); + } + + /* SUSPEND */ + if (usb_status & S3C2410_UDC_USBINT_SUSPEND) { + dprintk(DEBUG_NORMAL, "USB suspend\n"); + + /* clear interrupt */ + udc_write(S3C2410_UDC_USBINT_SUSPEND, + S3C2410_UDC_USB_INT_REG); + + if (dev->gadget.speed != USB_SPEED_UNKNOWN + && dev->driver + && dev->driver->suspend) + dev->driver->suspend(&dev->gadget); + + dev->ep0state = EP0_IDLE; + } + + /* EP */ + /* control traffic */ + /* check on ep0csr != 0 is not a good idea as clearing in_pkt_ready + * generate an interrupt + */ + if (usbd_status & S3C2410_UDC_INT_EP0) { + dprintk(DEBUG_VERBOSE, "USB ep0 irq\n"); + /* Clear the interrupt bit by setting it to 1 */ + udc_write(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_REG); + s3c2410_udc_handle_ep0(dev); + } + + /* endpoint data transfers */ + for (i = 1; i < S3C2410_ENDPOINTS; i++) { + u32 tmp = 1 << i; + if (usbd_status & tmp) { + dprintk(DEBUG_VERBOSE, "USB ep%d irq\n", i); + + /* Clear the interrupt bit by setting it to 1 */ + udc_write(tmp, S3C2410_UDC_EP_INT_REG); + s3c2410_udc_handle_ep(&dev->ep[i]); + } + } + + /* what else causes this interrupt? a receive! who is it? */ + if (!usb_status && !usbd_status && !pwr_reg && !ep0csr) { + for (i = 1; i < S3C2410_ENDPOINTS; i++) { + idx2 = udc_read(S3C2410_UDC_INDEX_REG); + udc_write(i, S3C2410_UDC_INDEX_REG); + + if (udc_read(S3C2410_UDC_OUT_CSR1_REG) & 0x1) + s3c2410_udc_handle_ep(&dev->ep[i]); + + /* restore index */ + udc_write(idx2, S3C2410_UDC_INDEX_REG); + } + } + + dprintk(DEBUG_VERBOSE, "irq: %d s3c2410_udc_done.\n", irq_usbd); + + /* Restore old index */ + udc_write(idx, S3C2410_UDC_INDEX_REG); + + spin_unlock_irqrestore(&dev->lock, flags); + + return IRQ_HANDLED; +} +/*------------------------- s3c2410_ep_ops ----------------------------------*/ + +static inline struct s3c2410_ep *to_s3c2410_ep(struct usb_ep *ep) +{ + return container_of(ep, struct s3c2410_ep, ep); +} + +static inline struct s3c2410_udc *to_s3c2410_udc(struct usb_gadget *gadget) +{ + return container_of(gadget, struct s3c2410_udc, gadget); +} + +static inline struct s3c2410_request *to_s3c2410_req(struct usb_request *req) +{ + return container_of(req, struct s3c2410_request, req); +} + +/* + * s3c2410_udc_ep_enable + */ +static int s3c2410_udc_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct s3c2410_udc *dev; + struct s3c2410_ep *ep; + u32 max, tmp; + unsigned long flags; + u32 csr1, csr2; + u32 int_en_reg; + + ep = to_s3c2410_ep(_ep); + + if (!_ep || !desc + || _ep->name == ep0name + || desc->bDescriptorType != USB_DT_ENDPOINT) + return -EINVAL; + + dev = ep->dev; + if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + max = usb_endpoint_maxp(desc); + + local_irq_save(flags); + _ep->maxpacket = max; + ep->ep.desc = desc; + ep->halted = 0; + ep->bEndpointAddress = desc->bEndpointAddress; + + /* set max packet */ + udc_write(ep->num, S3C2410_UDC_INDEX_REG); + udc_write(max >> 3, S3C2410_UDC_MAXP_REG); + + /* set type, direction, address; reset fifo counters */ + if (desc->bEndpointAddress & USB_DIR_IN) { + csr1 = S3C2410_UDC_ICSR1_FFLUSH|S3C2410_UDC_ICSR1_CLRDT; + csr2 = S3C2410_UDC_ICSR2_MODEIN|S3C2410_UDC_ICSR2_DMAIEN; + + udc_write(ep->num, S3C2410_UDC_INDEX_REG); + udc_write(csr1, S3C2410_UDC_IN_CSR1_REG); + udc_write(ep->num, S3C2410_UDC_INDEX_REG); + udc_write(csr2, S3C2410_UDC_IN_CSR2_REG); + } else { + /* don't flush in fifo or it will cause endpoint interrupt */ + csr1 = S3C2410_UDC_ICSR1_CLRDT; + csr2 = S3C2410_UDC_ICSR2_DMAIEN; + + udc_write(ep->num, S3C2410_UDC_INDEX_REG); + udc_write(csr1, S3C2410_UDC_IN_CSR1_REG); + udc_write(ep->num, S3C2410_UDC_INDEX_REG); + udc_write(csr2, S3C2410_UDC_IN_CSR2_REG); + + csr1 = S3C2410_UDC_OCSR1_FFLUSH | S3C2410_UDC_OCSR1_CLRDT; + csr2 = S3C2410_UDC_OCSR2_DMAIEN; + + udc_write(ep->num, S3C2410_UDC_INDEX_REG); + udc_write(csr1, S3C2410_UDC_OUT_CSR1_REG); + udc_write(ep->num, S3C2410_UDC_INDEX_REG); + udc_write(csr2, S3C2410_UDC_OUT_CSR2_REG); + } + + /* enable irqs */ + int_en_reg = udc_read(S3C2410_UDC_EP_INT_EN_REG); + udc_write(int_en_reg | (1 << ep->num), S3C2410_UDC_EP_INT_EN_REG); + + /* print some debug message */ + tmp = desc->bEndpointAddress; + dprintk(DEBUG_NORMAL, "enable %s(%d) ep%x%s-blk max %02x\n", + _ep->name, ep->num, tmp, + desc->bEndpointAddress & USB_DIR_IN ? "in" : "out", max); + + local_irq_restore(flags); + s3c2410_udc_set_halt(_ep, 0); + + return 0; +} + +/* + * s3c2410_udc_ep_disable + */ +static int s3c2410_udc_ep_disable(struct usb_ep *_ep) +{ + struct s3c2410_ep *ep = to_s3c2410_ep(_ep); + unsigned long flags; + u32 int_en_reg; + + if (!_ep || !ep->ep.desc) { + dprintk(DEBUG_NORMAL, "%s not enabled\n", + _ep ? ep->ep.name : NULL); + return -EINVAL; + } + + local_irq_save(flags); + + dprintk(DEBUG_NORMAL, "ep_disable: %s\n", _ep->name); + + ep->ep.desc = NULL; + ep->halted = 1; + + s3c2410_udc_nuke(ep->dev, ep, -ESHUTDOWN); + + /* disable irqs */ + int_en_reg = udc_read(S3C2410_UDC_EP_INT_EN_REG); + udc_write(int_en_reg & ~(1<<ep->num), S3C2410_UDC_EP_INT_EN_REG); + + local_irq_restore(flags); + + dprintk(DEBUG_NORMAL, "%s disabled\n", _ep->name); + + return 0; +} + +/* + * s3c2410_udc_alloc_request + */ +static struct usb_request * +s3c2410_udc_alloc_request(struct usb_ep *_ep, gfp_t mem_flags) +{ + struct s3c2410_request *req; + + dprintk(DEBUG_VERBOSE, "%s(%p,%d)\n", __func__, _ep, mem_flags); + + if (!_ep) + return NULL; + + req = kzalloc(sizeof(struct s3c2410_request), mem_flags); + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->queue); + return &req->req; +} + +/* + * s3c2410_udc_free_request + */ +static void +s3c2410_udc_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct s3c2410_ep *ep = to_s3c2410_ep(_ep); + struct s3c2410_request *req = to_s3c2410_req(_req); + + dprintk(DEBUG_VERBOSE, "%s(%p,%p)\n", __func__, _ep, _req); + + if (!ep || !_req || (!ep->ep.desc && _ep->name != ep0name)) + return; + + WARN_ON(!list_empty(&req->queue)); + kfree(req); +} + +/* + * s3c2410_udc_queue + */ +static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t gfp_flags) +{ + struct s3c2410_request *req = to_s3c2410_req(_req); + struct s3c2410_ep *ep = to_s3c2410_ep(_ep); + struct s3c2410_udc *dev; + u32 ep_csr = 0; + int fifo_count = 0; + unsigned long flags; + + if (unlikely(!_ep || (!ep->ep.desc && ep->ep.name != ep0name))) { + dprintk(DEBUG_NORMAL, "%s: invalid args\n", __func__); + return -EINVAL; + } + + dev = ep->dev; + if (unlikely(!dev->driver + || dev->gadget.speed == USB_SPEED_UNKNOWN)) { + return -ESHUTDOWN; + } + + local_irq_save(flags); + + if (unlikely(!_req || !_req->complete + || !_req->buf || !list_empty(&req->queue))) { + if (!_req) + dprintk(DEBUG_NORMAL, "%s: 1 X X X\n", __func__); + else { + dprintk(DEBUG_NORMAL, "%s: 0 %01d %01d %01d\n", + __func__, !_req->complete, !_req->buf, + !list_empty(&req->queue)); + } + + local_irq_restore(flags); + return -EINVAL; + } + + _req->status = -EINPROGRESS; + _req->actual = 0; + + dprintk(DEBUG_VERBOSE, "%s: ep%x len %d\n", + __func__, ep->bEndpointAddress, _req->length); + + if (ep->bEndpointAddress) { + udc_write(ep->bEndpointAddress & 0x7F, S3C2410_UDC_INDEX_REG); + + ep_csr = udc_read((ep->bEndpointAddress & USB_DIR_IN) + ? S3C2410_UDC_IN_CSR1_REG + : S3C2410_UDC_OUT_CSR1_REG); + fifo_count = s3c2410_udc_fifo_count_out(); + } else { + udc_write(0, S3C2410_UDC_INDEX_REG); + ep_csr = udc_read(S3C2410_UDC_IN_CSR1_REG); + fifo_count = s3c2410_udc_fifo_count_out(); + } + + /* kickstart this i/o queue? */ + if (list_empty(&ep->queue) && !ep->halted) { + if (ep->bEndpointAddress == 0 /* ep0 */) { + switch (dev->ep0state) { + case EP0_IN_DATA_PHASE: + if (!(ep_csr&S3C2410_UDC_EP0_CSR_IPKRDY) + && s3c2410_udc_write_fifo(ep, + req)) { + dev->ep0state = EP0_IDLE; + req = NULL; + } + break; + + case EP0_OUT_DATA_PHASE: + if ((!_req->length) + || ((ep_csr & S3C2410_UDC_OCSR1_PKTRDY) + && s3c2410_udc_read_fifo(ep, + req))) { + dev->ep0state = EP0_IDLE; + req = NULL; + } + break; + + default: + local_irq_restore(flags); + return -EL2HLT; + } + } else if ((ep->bEndpointAddress & USB_DIR_IN) != 0 + && (!(ep_csr&S3C2410_UDC_OCSR1_PKTRDY)) + && s3c2410_udc_write_fifo(ep, req)) { + req = NULL; + } else if ((ep_csr & S3C2410_UDC_OCSR1_PKTRDY) + && fifo_count + && s3c2410_udc_read_fifo(ep, req)) { + req = NULL; + } + } + + /* pio or dma irq handler advances the queue. */ + if (likely(req)) + list_add_tail(&req->queue, &ep->queue); + + local_irq_restore(flags); + + dprintk(DEBUG_VERBOSE, "%s ok\n", __func__); + return 0; +} + +/* + * s3c2410_udc_dequeue + */ +static int s3c2410_udc_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct s3c2410_ep *ep = to_s3c2410_ep(_ep); + int retval = -EINVAL; + unsigned long flags; + struct s3c2410_request *req = NULL, *iter; + + dprintk(DEBUG_VERBOSE, "%s(%p,%p)\n", __func__, _ep, _req); + + if (!the_controller->driver) + return -ESHUTDOWN; + + if (!_ep || !_req) + return retval; + + local_irq_save(flags); + + list_for_each_entry(iter, &ep->queue, queue) { + if (&iter->req != _req) + continue; + list_del_init(&iter->queue); + _req->status = -ECONNRESET; + req = iter; + retval = 0; + break; + } + + if (retval == 0) { + dprintk(DEBUG_VERBOSE, + "dequeued req %p from %s, len %d buf %p\n", + req, _ep->name, _req->length, _req->buf); + + s3c2410_udc_done(ep, req, -ECONNRESET); + } + + local_irq_restore(flags); + return retval; +} + +/* + * s3c2410_udc_set_halt + */ +static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value) +{ + struct s3c2410_ep *ep = to_s3c2410_ep(_ep); + u32 ep_csr = 0; + unsigned long flags; + u32 idx; + + if (unlikely(!_ep || (!ep->ep.desc && ep->ep.name != ep0name))) { + dprintk(DEBUG_NORMAL, "%s: inval 2\n", __func__); + return -EINVAL; + } + + local_irq_save(flags); + + idx = ep->bEndpointAddress & 0x7F; + + if (idx == 0) { + s3c2410_udc_set_ep0_ss(base_addr); + s3c2410_udc_set_ep0_de_out(base_addr); + } else { + udc_write(idx, S3C2410_UDC_INDEX_REG); + ep_csr = udc_read((ep->bEndpointAddress & USB_DIR_IN) + ? S3C2410_UDC_IN_CSR1_REG + : S3C2410_UDC_OUT_CSR1_REG); + + if ((ep->bEndpointAddress & USB_DIR_IN) != 0) { + if (value) + udc_write(ep_csr | S3C2410_UDC_ICSR1_SENDSTL, + S3C2410_UDC_IN_CSR1_REG); + else { + ep_csr &= ~S3C2410_UDC_ICSR1_SENDSTL; + udc_write(ep_csr, S3C2410_UDC_IN_CSR1_REG); + ep_csr |= S3C2410_UDC_ICSR1_CLRDT; + udc_write(ep_csr, S3C2410_UDC_IN_CSR1_REG); + } + } else { + if (value) + udc_write(ep_csr | S3C2410_UDC_OCSR1_SENDSTL, + S3C2410_UDC_OUT_CSR1_REG); + else { + ep_csr &= ~S3C2410_UDC_OCSR1_SENDSTL; + udc_write(ep_csr, S3C2410_UDC_OUT_CSR1_REG); + ep_csr |= S3C2410_UDC_OCSR1_CLRDT; + udc_write(ep_csr, S3C2410_UDC_OUT_CSR1_REG); + } + } + } + + ep->halted = value ? 1 : 0; + local_irq_restore(flags); + + return 0; +} + +static const struct usb_ep_ops s3c2410_ep_ops = { + .enable = s3c2410_udc_ep_enable, + .disable = s3c2410_udc_ep_disable, + + .alloc_request = s3c2410_udc_alloc_request, + .free_request = s3c2410_udc_free_request, + + .queue = s3c2410_udc_queue, + .dequeue = s3c2410_udc_dequeue, + + .set_halt = s3c2410_udc_set_halt, +}; + +/*------------------------- usb_gadget_ops ----------------------------------*/ + +/* + * s3c2410_udc_get_frame + */ +static int s3c2410_udc_get_frame(struct usb_gadget *_gadget) +{ + int tmp; + + dprintk(DEBUG_VERBOSE, "%s()\n", __func__); + + tmp = udc_read(S3C2410_UDC_FRAME_NUM2_REG) << 8; + tmp |= udc_read(S3C2410_UDC_FRAME_NUM1_REG); + return tmp; +} + +/* + * s3c2410_udc_wakeup + */ +static int s3c2410_udc_wakeup(struct usb_gadget *_gadget) +{ + dprintk(DEBUG_NORMAL, "%s()\n", __func__); + return 0; +} + +/* + * s3c2410_udc_set_selfpowered + */ +static int s3c2410_udc_set_selfpowered(struct usb_gadget *gadget, int value) +{ + struct s3c2410_udc *udc = to_s3c2410_udc(gadget); + + dprintk(DEBUG_NORMAL, "%s()\n", __func__); + + gadget->is_selfpowered = (value != 0); + if (value) + udc->devstatus |= (1 << USB_DEVICE_SELF_POWERED); + else + udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED); + + return 0; +} + +static void s3c2410_udc_disable(struct s3c2410_udc *dev); +static void s3c2410_udc_enable(struct s3c2410_udc *dev); + +static int s3c2410_udc_set_pullup(struct s3c2410_udc *udc, int is_on) +{ + dprintk(DEBUG_NORMAL, "%s()\n", __func__); + + if (udc_info && (udc_info->udc_command || udc->pullup_gpiod)) { + + if (is_on) + s3c2410_udc_enable(udc); + else { + if (udc->gadget.speed != USB_SPEED_UNKNOWN) { + if (udc->driver && udc->driver->disconnect) + udc->driver->disconnect(&udc->gadget); + + } + s3c2410_udc_disable(udc); + } + } else { + return -EOPNOTSUPP; + } + + return 0; +} + +static int s3c2410_udc_vbus_session(struct usb_gadget *gadget, int is_active) +{ + struct s3c2410_udc *udc = to_s3c2410_udc(gadget); + + dprintk(DEBUG_NORMAL, "%s()\n", __func__); + + udc->vbus = (is_active != 0); + s3c2410_udc_set_pullup(udc, is_active); + return 0; +} + +static int s3c2410_udc_pullup(struct usb_gadget *gadget, int is_on) +{ + struct s3c2410_udc *udc = to_s3c2410_udc(gadget); + + dprintk(DEBUG_NORMAL, "%s()\n", __func__); + + s3c2410_udc_set_pullup(udc, is_on); + return 0; +} + +static irqreturn_t s3c2410_udc_vbus_irq(int irq, void *_dev) +{ + struct s3c2410_udc *dev = _dev; + unsigned int value; + + dprintk(DEBUG_NORMAL, "%s()\n", __func__); + + value = gpiod_get_value(dev->vbus_gpiod); + + if (value != dev->vbus) + s3c2410_udc_vbus_session(&dev->gadget, value); + + return IRQ_HANDLED; +} + +static int s3c2410_vbus_draw(struct usb_gadget *_gadget, unsigned ma) +{ + dprintk(DEBUG_NORMAL, "%s()\n", __func__); + + if (udc_info && udc_info->vbus_draw) { + udc_info->vbus_draw(ma); + return 0; + } + + return -ENOTSUPP; +} + +static int s3c2410_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver); +static int s3c2410_udc_stop(struct usb_gadget *g); + +static const struct usb_gadget_ops s3c2410_ops = { + .get_frame = s3c2410_udc_get_frame, + .wakeup = s3c2410_udc_wakeup, + .set_selfpowered = s3c2410_udc_set_selfpowered, + .pullup = s3c2410_udc_pullup, + .vbus_session = s3c2410_udc_vbus_session, + .vbus_draw = s3c2410_vbus_draw, + .udc_start = s3c2410_udc_start, + .udc_stop = s3c2410_udc_stop, +}; + +static void s3c2410_udc_command(struct s3c2410_udc *udc, + enum s3c2410_udc_cmd_e cmd) +{ + if (!udc_info) + return; + + if (udc_info->udc_command) { + udc_info->udc_command(cmd); + } else if (udc->pullup_gpiod) { + int value; + + switch (cmd) { + case S3C2410_UDC_P_ENABLE: + value = 1; + break; + case S3C2410_UDC_P_DISABLE: + value = 0; + break; + default: + return; + } + + gpiod_set_value(udc->pullup_gpiod, value); + } +} + +/*------------------------- gadget driver handling---------------------------*/ +/* + * s3c2410_udc_disable + */ +static void s3c2410_udc_disable(struct s3c2410_udc *dev) +{ + dprintk(DEBUG_NORMAL, "%s()\n", __func__); + + /* Disable all interrupts */ + udc_write(0x00, S3C2410_UDC_USB_INT_EN_REG); + udc_write(0x00, S3C2410_UDC_EP_INT_EN_REG); + + /* Clear the interrupt registers */ + udc_write(S3C2410_UDC_USBINT_RESET + | S3C2410_UDC_USBINT_RESUME + | S3C2410_UDC_USBINT_SUSPEND, + S3C2410_UDC_USB_INT_REG); + + udc_write(0x1F, S3C2410_UDC_EP_INT_REG); + + /* Good bye, cruel world */ + s3c2410_udc_command(dev, S3C2410_UDC_P_DISABLE); + + /* Set speed to unknown */ + dev->gadget.speed = USB_SPEED_UNKNOWN; +} + +/* + * s3c2410_udc_reinit + */ +static void s3c2410_udc_reinit(struct s3c2410_udc *dev) +{ + u32 i; + + /* device/ep0 records init */ + INIT_LIST_HEAD(&dev->gadget.ep_list); + INIT_LIST_HEAD(&dev->gadget.ep0->ep_list); + dev->ep0state = EP0_IDLE; + + for (i = 0; i < S3C2410_ENDPOINTS; i++) { + struct s3c2410_ep *ep = &dev->ep[i]; + + if (i != 0) + list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list); + + ep->dev = dev; + ep->ep.desc = NULL; + ep->halted = 0; + INIT_LIST_HEAD(&ep->queue); + usb_ep_set_maxpacket_limit(&ep->ep, ep->ep.maxpacket); + } +} + +/* + * s3c2410_udc_enable + */ +static void s3c2410_udc_enable(struct s3c2410_udc *dev) +{ + int i; + + dprintk(DEBUG_NORMAL, "s3c2410_udc_enable called\n"); + + /* dev->gadget.speed = USB_SPEED_UNKNOWN; */ + dev->gadget.speed = USB_SPEED_FULL; + + /* Set MAXP for all endpoints */ + for (i = 0; i < S3C2410_ENDPOINTS; i++) { + udc_write(i, S3C2410_UDC_INDEX_REG); + udc_write((dev->ep[i].ep.maxpacket & 0x7ff) >> 3, + S3C2410_UDC_MAXP_REG); + } + + /* Set default power state */ + udc_write(DEFAULT_POWER_STATE, S3C2410_UDC_PWR_REG); + + /* Enable reset and suspend interrupt interrupts */ + udc_write(S3C2410_UDC_USBINT_RESET | S3C2410_UDC_USBINT_SUSPEND, + S3C2410_UDC_USB_INT_EN_REG); + + /* Enable ep0 interrupt */ + udc_write(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_EN_REG); + + /* time to say "hello, world" */ + s3c2410_udc_command(dev, S3C2410_UDC_P_ENABLE); +} + +static int s3c2410_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) +{ + struct s3c2410_udc *udc = to_s3c2410(g); + + dprintk(DEBUG_NORMAL, "%s() '%s'\n", __func__, driver->driver.name); + + /* Hook the driver */ + udc->driver = driver; + + /* Enable udc */ + s3c2410_udc_enable(udc); + + return 0; +} + +static int s3c2410_udc_stop(struct usb_gadget *g) +{ + struct s3c2410_udc *udc = to_s3c2410(g); + + udc->driver = NULL; + + /* Disable udc */ + s3c2410_udc_disable(udc); + + return 0; +} + +/*---------------------------------------------------------------------------*/ +static struct s3c2410_udc memory = { + .gadget = { + .ops = &s3c2410_ops, + .ep0 = &memory.ep[0].ep, + .name = gadget_name, + .dev = { + .init_name = "gadget", + }, + }, + + /* control endpoint */ + .ep[0] = { + .num = 0, + .ep = { + .name = ep0name, + .ops = &s3c2410_ep_ops, + .maxpacket = EP0_FIFO_SIZE, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, + USB_EP_CAPS_DIR_ALL), + }, + .dev = &memory, + }, + + /* first group of endpoints */ + .ep[1] = { + .num = 1, + .ep = { + .name = "ep1-bulk", + .ops = &s3c2410_ep_ops, + .maxpacket = EP_FIFO_SIZE, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, + USB_EP_CAPS_DIR_ALL), + }, + .dev = &memory, + .fifo_size = EP_FIFO_SIZE, + .bEndpointAddress = 1, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + }, + .ep[2] = { + .num = 2, + .ep = { + .name = "ep2-bulk", + .ops = &s3c2410_ep_ops, + .maxpacket = EP_FIFO_SIZE, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, + USB_EP_CAPS_DIR_ALL), + }, + .dev = &memory, + .fifo_size = EP_FIFO_SIZE, + .bEndpointAddress = 2, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + }, + .ep[3] = { + .num = 3, + .ep = { + .name = "ep3-bulk", + .ops = &s3c2410_ep_ops, + .maxpacket = EP_FIFO_SIZE, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, + USB_EP_CAPS_DIR_ALL), + }, + .dev = &memory, + .fifo_size = EP_FIFO_SIZE, + .bEndpointAddress = 3, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + }, + .ep[4] = { + .num = 4, + .ep = { + .name = "ep4-bulk", + .ops = &s3c2410_ep_ops, + .maxpacket = EP_FIFO_SIZE, + .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, + USB_EP_CAPS_DIR_ALL), + }, + .dev = &memory, + .fifo_size = EP_FIFO_SIZE, + .bEndpointAddress = 4, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + } + +}; + +/* + * probe - binds to the platform device + */ +static int s3c2410_udc_probe(struct platform_device *pdev) +{ + struct s3c2410_udc *udc = &memory; + struct device *dev = &pdev->dev; + int retval; + int irq; + + dev_dbg(dev, "%s()\n", __func__); + + usb_bus_clock = clk_get(NULL, "usb-bus-gadget"); + if (IS_ERR(usb_bus_clock)) { + dev_err(dev, "failed to get usb bus clock source\n"); + return PTR_ERR(usb_bus_clock); + } + + clk_prepare_enable(usb_bus_clock); + + udc_clock = clk_get(NULL, "usb-device"); + if (IS_ERR(udc_clock)) { + dev_err(dev, "failed to get udc clock source\n"); + retval = PTR_ERR(udc_clock); + goto err_usb_bus_clk; + } + + clk_prepare_enable(udc_clock); + + mdelay(10); + + dev_dbg(dev, "got and enabled clocks\n"); + + if (strncmp(pdev->name, "s3c2440", 7) == 0) { + dev_info(dev, "S3C2440: increasing FIFO to 128 bytes\n"); + memory.ep[1].fifo_size = S3C2440_EP_FIFO_SIZE; + memory.ep[2].fifo_size = S3C2440_EP_FIFO_SIZE; + memory.ep[3].fifo_size = S3C2440_EP_FIFO_SIZE; + memory.ep[4].fifo_size = S3C2440_EP_FIFO_SIZE; + } + + spin_lock_init(&udc->lock); + udc_info = dev_get_platdata(&pdev->dev); + + base_addr = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base_addr)) { + retval = PTR_ERR(base_addr); + goto err_udc_clk; + } + + the_controller = udc; + platform_set_drvdata(pdev, udc); + + s3c2410_udc_disable(udc); + s3c2410_udc_reinit(udc); + + irq_usbd = platform_get_irq(pdev, 0); + if (irq_usbd < 0) { + retval = irq_usbd; + goto err_udc_clk; + } + + /* irq setup after old hardware state is cleaned up */ + retval = request_irq(irq_usbd, s3c2410_udc_irq, + 0, gadget_name, udc); + + if (retval != 0) { + dev_err(dev, "cannot get irq %i, err %d\n", irq_usbd, retval); + retval = -EBUSY; + goto err_udc_clk; + } + + dev_dbg(dev, "got irq %i\n", irq_usbd); + + udc->vbus_gpiod = gpiod_get_optional(dev, "vbus", GPIOD_IN); + if (IS_ERR(udc->vbus_gpiod)) { + retval = PTR_ERR(udc->vbus_gpiod); + goto err_int; + } + if (udc->vbus_gpiod) { + gpiod_set_consumer_name(udc->vbus_gpiod, "udc vbus"); + + irq = gpiod_to_irq(udc->vbus_gpiod); + if (irq < 0) { + dev_err(dev, "no irq for gpio vbus pin\n"); + retval = irq; + goto err_gpio_claim; + } + + retval = request_irq(irq, s3c2410_udc_vbus_irq, + IRQF_TRIGGER_RISING + | IRQF_TRIGGER_FALLING | IRQF_SHARED, + gadget_name, udc); + + if (retval != 0) { + dev_err(dev, "can't get vbus irq %d, err %d\n", + irq, retval); + retval = -EBUSY; + goto err_gpio_claim; + } + + dev_dbg(dev, "got irq %i\n", irq); + } else { + udc->vbus = 1; + } + + udc->pullup_gpiod = gpiod_get_optional(dev, "pullup", GPIOD_OUT_LOW); + if (IS_ERR(udc->pullup_gpiod)) { + retval = PTR_ERR(udc->pullup_gpiod); + goto err_vbus_irq; + } + gpiod_set_consumer_name(udc->pullup_gpiod, "udc pullup"); + + retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget); + if (retval) + goto err_add_udc; + + debugfs_create_file("registers", S_IRUGO, s3c2410_udc_debugfs_root, udc, + &s3c2410_udc_debugfs_fops); + + dev_dbg(dev, "probe ok\n"); + + return 0; + +err_add_udc: +err_vbus_irq: + if (udc->vbus_gpiod) + free_irq(gpiod_to_irq(udc->vbus_gpiod), udc); +err_gpio_claim: +err_int: + free_irq(irq_usbd, udc); +err_udc_clk: + clk_disable_unprepare(udc_clock); + clk_put(udc_clock); + udc_clock = NULL; +err_usb_bus_clk: + clk_disable_unprepare(usb_bus_clock); + clk_put(usb_bus_clock); + usb_bus_clock = NULL; + + return retval; +} + +/* + * s3c2410_udc_remove + */ +static int s3c2410_udc_remove(struct platform_device *pdev) +{ + struct s3c2410_udc *udc = platform_get_drvdata(pdev); + + dev_dbg(&pdev->dev, "%s()\n", __func__); + + if (udc->driver) + return -EBUSY; + + usb_del_gadget_udc(&udc->gadget); + debugfs_remove(debugfs_lookup("registers", s3c2410_udc_debugfs_root)); + + if (udc->vbus_gpiod) + free_irq(gpiod_to_irq(udc->vbus_gpiod), udc); + + free_irq(irq_usbd, udc); + + if (!IS_ERR(udc_clock) && udc_clock != NULL) { + clk_disable_unprepare(udc_clock); + clk_put(udc_clock); + udc_clock = NULL; + } + + if (!IS_ERR(usb_bus_clock) && usb_bus_clock != NULL) { + clk_disable_unprepare(usb_bus_clock); + clk_put(usb_bus_clock); + usb_bus_clock = NULL; + } + + dev_dbg(&pdev->dev, "%s: remove ok\n", __func__); + return 0; +} + +#ifdef CONFIG_PM +static int +s3c2410_udc_suspend(struct platform_device *pdev, pm_message_t message) +{ + struct s3c2410_udc *udc = platform_get_drvdata(pdev); + + s3c2410_udc_command(udc, S3C2410_UDC_P_DISABLE); + + return 0; +} + +static int s3c2410_udc_resume(struct platform_device *pdev) +{ + struct s3c2410_udc *udc = platform_get_drvdata(pdev); + + s3c2410_udc_command(udc, S3C2410_UDC_P_ENABLE); + + return 0; +} +#else +#define s3c2410_udc_suspend NULL +#define s3c2410_udc_resume NULL +#endif + +static const struct platform_device_id s3c_udc_ids[] = { + { "s3c2410-usbgadget", }, + { "s3c2440-usbgadget", }, + { } +}; +MODULE_DEVICE_TABLE(platform, s3c_udc_ids); + +static struct platform_driver udc_driver_24x0 = { + .driver = { + .name = "s3c24x0-usbgadget", + }, + .probe = s3c2410_udc_probe, + .remove = s3c2410_udc_remove, + .suspend = s3c2410_udc_suspend, + .resume = s3c2410_udc_resume, + .id_table = s3c_udc_ids, +}; + +static int __init udc_init(void) +{ + int retval; + + dprintk(DEBUG_NORMAL, "%s\n", gadget_name); + + s3c2410_udc_debugfs_root = debugfs_create_dir(gadget_name, + usb_debug_root); + + retval = platform_driver_register(&udc_driver_24x0); + if (retval) + goto err; + + return 0; + +err: + debugfs_remove(s3c2410_udc_debugfs_root); + return retval; +} + +static void __exit udc_exit(void) +{ + platform_driver_unregister(&udc_driver_24x0); + debugfs_remove_recursive(s3c2410_udc_debugfs_root); +} + +module_init(udc_init); +module_exit(udc_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/udc/s3c2410_udc.h b/drivers/usb/gadget/udc/s3c2410_udc.h new file mode 100644 index 000000000..cdbf202e5 --- /dev/null +++ b/drivers/usb/gadget/udc/s3c2410_udc.h @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * linux/drivers/usb/gadget/s3c2410_udc.h + * Samsung on-chip full speed USB device controllers + * + * Copyright (C) 2004-2007 Herbert Pötzl - Arnaud Patard + * Additional cleanups by Ben Dooks <ben-linux@fluff.org> + */ + +#ifndef _S3C2410_UDC_H +#define _S3C2410_UDC_H + +struct s3c2410_ep { + struct list_head queue; + unsigned long last_io; /* jiffies timestamp */ + struct usb_gadget *gadget; + struct s3c2410_udc *dev; + struct usb_ep ep; + u8 num; + + unsigned short fifo_size; + u8 bEndpointAddress; + u8 bmAttributes; + + unsigned halted : 1; + unsigned already_seen : 1; + unsigned setup_stage : 1; +}; + + +/* Warning : ep0 has a fifo of 16 bytes */ +/* Don't try to set 32 or 64 */ +/* also testusb 14 fails wit 16 but is */ +/* fine with 8 */ +#define EP0_FIFO_SIZE 8 +#define EP_FIFO_SIZE 64 +#define DEFAULT_POWER_STATE 0x00 + +#define S3C2440_EP_FIFO_SIZE 128 + +static const char ep0name [] = "ep0"; + +static const char *const ep_name[] = { + ep0name, /* everyone has ep0 */ + /* s3c2410 four bidirectional bulk endpoints */ + "ep1-bulk", "ep2-bulk", "ep3-bulk", "ep4-bulk", +}; + +#define S3C2410_ENDPOINTS ARRAY_SIZE(ep_name) + +struct s3c2410_request { + struct list_head queue; /* ep's requests */ + struct usb_request req; +}; + +enum ep0_state { + EP0_IDLE, + EP0_IN_DATA_PHASE, + EP0_OUT_DATA_PHASE, + EP0_END_XFER, + EP0_STALL, +}; + +static const char *ep0states[]= { + "EP0_IDLE", + "EP0_IN_DATA_PHASE", + "EP0_OUT_DATA_PHASE", + "EP0_END_XFER", + "EP0_STALL", +}; + +struct s3c2410_udc { + spinlock_t lock; + + struct s3c2410_ep ep[S3C2410_ENDPOINTS]; + int address; + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + struct s3c2410_request fifo_req; + u8 fifo_buf[EP_FIFO_SIZE]; + u16 devstatus; + + u32 port_status; + int ep0state; + + struct gpio_desc *vbus_gpiod; + struct gpio_desc *pullup_gpiod; + + unsigned got_irq : 1; + + unsigned req_std : 1; + unsigned req_config : 1; + unsigned req_pending : 1; + u8 vbus; + int irq; +}; +#define to_s3c2410(g) (container_of((g), struct s3c2410_udc, gadget)) + +#endif diff --git a/drivers/usb/gadget/udc/s3c2410_udc_regs.h b/drivers/usb/gadget/udc/s3c2410_udc_regs.h new file mode 100644 index 000000000..d8d2eeaca --- /dev/null +++ b/drivers/usb/gadget/udc/s3c2410_udc_regs.h @@ -0,0 +1,146 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at> + */ + +#ifndef __ASM_ARCH_REGS_UDC_H +#define __ASM_ARCH_REGS_UDC_H + +#define S3C2410_USBDREG(x) (x) + +#define S3C2410_UDC_FUNC_ADDR_REG S3C2410_USBDREG(0x0140) +#define S3C2410_UDC_PWR_REG S3C2410_USBDREG(0x0144) +#define S3C2410_UDC_EP_INT_REG S3C2410_USBDREG(0x0148) + +#define S3C2410_UDC_USB_INT_REG S3C2410_USBDREG(0x0158) +#define S3C2410_UDC_EP_INT_EN_REG S3C2410_USBDREG(0x015c) + +#define S3C2410_UDC_USB_INT_EN_REG S3C2410_USBDREG(0x016c) + +#define S3C2410_UDC_FRAME_NUM1_REG S3C2410_USBDREG(0x0170) +#define S3C2410_UDC_FRAME_NUM2_REG S3C2410_USBDREG(0x0174) + +#define S3C2410_UDC_EP0_FIFO_REG S3C2410_USBDREG(0x01c0) +#define S3C2410_UDC_EP1_FIFO_REG S3C2410_USBDREG(0x01c4) +#define S3C2410_UDC_EP2_FIFO_REG S3C2410_USBDREG(0x01c8) +#define S3C2410_UDC_EP3_FIFO_REG S3C2410_USBDREG(0x01cc) +#define S3C2410_UDC_EP4_FIFO_REG S3C2410_USBDREG(0x01d0) + +#define S3C2410_UDC_EP1_DMA_CON S3C2410_USBDREG(0x0200) +#define S3C2410_UDC_EP1_DMA_UNIT S3C2410_USBDREG(0x0204) +#define S3C2410_UDC_EP1_DMA_FIFO S3C2410_USBDREG(0x0208) +#define S3C2410_UDC_EP1_DMA_TTC_L S3C2410_USBDREG(0x020c) +#define S3C2410_UDC_EP1_DMA_TTC_M S3C2410_USBDREG(0x0210) +#define S3C2410_UDC_EP1_DMA_TTC_H S3C2410_USBDREG(0x0214) + +#define S3C2410_UDC_EP2_DMA_CON S3C2410_USBDREG(0x0218) +#define S3C2410_UDC_EP2_DMA_UNIT S3C2410_USBDREG(0x021c) +#define S3C2410_UDC_EP2_DMA_FIFO S3C2410_USBDREG(0x0220) +#define S3C2410_UDC_EP2_DMA_TTC_L S3C2410_USBDREG(0x0224) +#define S3C2410_UDC_EP2_DMA_TTC_M S3C2410_USBDREG(0x0228) +#define S3C2410_UDC_EP2_DMA_TTC_H S3C2410_USBDREG(0x022c) + +#define S3C2410_UDC_EP3_DMA_CON S3C2410_USBDREG(0x0240) +#define S3C2410_UDC_EP3_DMA_UNIT S3C2410_USBDREG(0x0244) +#define S3C2410_UDC_EP3_DMA_FIFO S3C2410_USBDREG(0x0248) +#define S3C2410_UDC_EP3_DMA_TTC_L S3C2410_USBDREG(0x024c) +#define S3C2410_UDC_EP3_DMA_TTC_M S3C2410_USBDREG(0x0250) +#define S3C2410_UDC_EP3_DMA_TTC_H S3C2410_USBDREG(0x0254) + +#define S3C2410_UDC_EP4_DMA_CON S3C2410_USBDREG(0x0258) +#define S3C2410_UDC_EP4_DMA_UNIT S3C2410_USBDREG(0x025c) +#define S3C2410_UDC_EP4_DMA_FIFO S3C2410_USBDREG(0x0260) +#define S3C2410_UDC_EP4_DMA_TTC_L S3C2410_USBDREG(0x0264) +#define S3C2410_UDC_EP4_DMA_TTC_M S3C2410_USBDREG(0x0268) +#define S3C2410_UDC_EP4_DMA_TTC_H S3C2410_USBDREG(0x026c) + +#define S3C2410_UDC_INDEX_REG S3C2410_USBDREG(0x0178) + +/* indexed registers */ + +#define S3C2410_UDC_MAXP_REG S3C2410_USBDREG(0x0180) + +#define S3C2410_UDC_EP0_CSR_REG S3C2410_USBDREG(0x0184) + +#define S3C2410_UDC_IN_CSR1_REG S3C2410_USBDREG(0x0184) +#define S3C2410_UDC_IN_CSR2_REG S3C2410_USBDREG(0x0188) + +#define S3C2410_UDC_OUT_CSR1_REG S3C2410_USBDREG(0x0190) +#define S3C2410_UDC_OUT_CSR2_REG S3C2410_USBDREG(0x0194) +#define S3C2410_UDC_OUT_FIFO_CNT1_REG S3C2410_USBDREG(0x0198) +#define S3C2410_UDC_OUT_FIFO_CNT2_REG S3C2410_USBDREG(0x019c) + +#define S3C2410_UDC_FUNCADDR_UPDATE (1 << 7) + +#define S3C2410_UDC_PWR_ISOUP (1 << 7) /* R/W */ +#define S3C2410_UDC_PWR_RESET (1 << 3) /* R */ +#define S3C2410_UDC_PWR_RESUME (1 << 2) /* R/W */ +#define S3C2410_UDC_PWR_SUSPEND (1 << 1) /* R */ +#define S3C2410_UDC_PWR_ENSUSPEND (1 << 0) /* R/W */ + +#define S3C2410_UDC_PWR_DEFAULT (0x00) + +#define S3C2410_UDC_INT_EP4 (1 << 4) /* R/W (clear only) */ +#define S3C2410_UDC_INT_EP3 (1 << 3) /* R/W (clear only) */ +#define S3C2410_UDC_INT_EP2 (1 << 2) /* R/W (clear only) */ +#define S3C2410_UDC_INT_EP1 (1 << 1) /* R/W (clear only) */ +#define S3C2410_UDC_INT_EP0 (1 << 0) /* R/W (clear only) */ + +#define S3C2410_UDC_USBINT_RESET (1 << 2) /* R/W (clear only) */ +#define S3C2410_UDC_USBINT_RESUME (1 << 1) /* R/W (clear only) */ +#define S3C2410_UDC_USBINT_SUSPEND (1 << 0) /* R/W (clear only) */ + +#define S3C2410_UDC_INTE_EP4 (1 << 4) /* R/W */ +#define S3C2410_UDC_INTE_EP3 (1 << 3) /* R/W */ +#define S3C2410_UDC_INTE_EP2 (1 << 2) /* R/W */ +#define S3C2410_UDC_INTE_EP1 (1 << 1) /* R/W */ +#define S3C2410_UDC_INTE_EP0 (1 << 0) /* R/W */ + +#define S3C2410_UDC_USBINTE_RESET (1 << 2) /* R/W */ +#define S3C2410_UDC_USBINTE_SUSPEND (1 << 0) /* R/W */ + +#define S3C2410_UDC_INDEX_EP0 (0x00) +#define S3C2410_UDC_INDEX_EP1 (0x01) +#define S3C2410_UDC_INDEX_EP2 (0x02) +#define S3C2410_UDC_INDEX_EP3 (0x03) +#define S3C2410_UDC_INDEX_EP4 (0x04) + +#define S3C2410_UDC_ICSR1_CLRDT (1 << 6) /* R/W */ +#define S3C2410_UDC_ICSR1_SENTSTL (1 << 5) /* R/W (clear only) */ +#define S3C2410_UDC_ICSR1_SENDSTL (1 << 4) /* R/W */ +#define S3C2410_UDC_ICSR1_FFLUSH (1 << 3) /* W (set only) */ +#define S3C2410_UDC_ICSR1_UNDRUN (1 << 2) /* R/W (clear only) */ +#define S3C2410_UDC_ICSR1_PKTRDY (1 << 0) /* R/W (set only) */ + +#define S3C2410_UDC_ICSR2_AUTOSET (1 << 7) /* R/W */ +#define S3C2410_UDC_ICSR2_ISO (1 << 6) /* R/W */ +#define S3C2410_UDC_ICSR2_MODEIN (1 << 5) /* R/W */ +#define S3C2410_UDC_ICSR2_DMAIEN (1 << 4) /* R/W */ + +#define S3C2410_UDC_OCSR1_CLRDT (1 << 7) /* R/W */ +#define S3C2410_UDC_OCSR1_SENTSTL (1 << 6) /* R/W (clear only) */ +#define S3C2410_UDC_OCSR1_SENDSTL (1 << 5) /* R/W */ +#define S3C2410_UDC_OCSR1_FFLUSH (1 << 4) /* R/W */ +#define S3C2410_UDC_OCSR1_DERROR (1 << 3) /* R */ +#define S3C2410_UDC_OCSR1_OVRRUN (1 << 2) /* R/W (clear only) */ +#define S3C2410_UDC_OCSR1_PKTRDY (1 << 0) /* R/W (clear only) */ + +#define S3C2410_UDC_OCSR2_AUTOCLR (1 << 7) /* R/W */ +#define S3C2410_UDC_OCSR2_ISO (1 << 6) /* R/W */ +#define S3C2410_UDC_OCSR2_DMAIEN (1 << 5) /* R/W */ + +#define S3C2410_UDC_EP0_CSR_OPKRDY (1 << 0) +#define S3C2410_UDC_EP0_CSR_IPKRDY (1 << 1) +#define S3C2410_UDC_EP0_CSR_SENTSTL (1 << 2) +#define S3C2410_UDC_EP0_CSR_DE (1 << 3) +#define S3C2410_UDC_EP0_CSR_SE (1 << 4) +#define S3C2410_UDC_EP0_CSR_SENDSTL (1 << 5) +#define S3C2410_UDC_EP0_CSR_SOPKTRDY (1 << 6) +#define S3C2410_UDC_EP0_CSR_SSE (1 << 7) + +#define S3C2410_UDC_MAXP_8 (1 << 0) +#define S3C2410_UDC_MAXP_16 (1 << 1) +#define S3C2410_UDC_MAXP_32 (1 << 2) +#define S3C2410_UDC_MAXP_64 (1 << 3) + +#endif diff --git a/drivers/usb/gadget/udc/snps_udc_core.c b/drivers/usb/gadget/udc/snps_udc_core.c new file mode 100644 index 000000000..2fc5d4d27 --- /dev/null +++ b/drivers/usb/gadget/udc/snps_udc_core.c @@ -0,0 +1,3192 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * amd5536.c -- AMD 5536 UDC high/full speed USB device controller + * + * Copyright (C) 2005-2007 AMD (https://www.amd.com) + * Author: Thomas Dahlmann + */ + +/* + * This file does the core driver implementation for the UDC that is based + * on Synopsys device controller IP (different than HS OTG IP) that is either + * connected through PCI bus or integrated to SoC platforms. + */ + +/* Driver strings */ +#define UDC_MOD_DESCRIPTION "Synopsys USB Device Controller" +#define UDC_DRIVER_VERSION_STRING "01.00.0206" + +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/ioctl.h> +#include <linux/fs.h> +#include <linux/dmapool.h> +#include <linux/prefetch.h> +#include <linux/moduleparam.h> +#include <asm/byteorder.h> +#include <asm/unaligned.h> +#include "amd5536udc.h" + +static void udc_setup_endpoints(struct udc *dev); +static void udc_soft_reset(struct udc *dev); +static struct udc_request *udc_alloc_bna_dummy(struct udc_ep *ep); +static void udc_free_request(struct usb_ep *usbep, struct usb_request *usbreq); + +/* description */ +static const char mod_desc[] = UDC_MOD_DESCRIPTION; +static const char name[] = "udc"; + +/* structure to hold endpoint function pointers */ +static const struct usb_ep_ops udc_ep_ops; + +/* received setup data */ +static union udc_setup_data setup_data; + +/* pointer to device object */ +static struct udc *udc; + +/* irq spin lock for soft reset */ +static DEFINE_SPINLOCK(udc_irq_spinlock); +/* stall spin lock */ +static DEFINE_SPINLOCK(udc_stall_spinlock); + +/* +* slave mode: pending bytes in rx fifo after nyet, +* used if EPIN irq came but no req was available +*/ +static unsigned int udc_rxfifo_pending; + +/* count soft resets after suspend to avoid loop */ +static int soft_reset_occured; +static int soft_reset_after_usbreset_occured; + +/* timer */ +static struct timer_list udc_timer; +static int stop_timer; + +/* set_rde -- Is used to control enabling of RX DMA. Problem is + * that UDC has only one bit (RDE) to enable/disable RX DMA for + * all OUT endpoints. So we have to handle race conditions like + * when OUT data reaches the fifo but no request was queued yet. + * This cannot be solved by letting the RX DMA disabled until a + * request gets queued because there may be other OUT packets + * in the FIFO (important for not blocking control traffic). + * The value of set_rde controls the corresponding timer. + * + * set_rde -1 == not used, means it is alloed to be set to 0 or 1 + * set_rde 0 == do not touch RDE, do no start the RDE timer + * set_rde 1 == timer function will look whether FIFO has data + * set_rde 2 == set by timer function to enable RX DMA on next call + */ +static int set_rde = -1; + +static DECLARE_COMPLETION(on_exit); +static struct timer_list udc_pollstall_timer; +static int stop_pollstall_timer; +static DECLARE_COMPLETION(on_pollstall_exit); + +/* endpoint names used for print */ +static const char ep0_string[] = "ep0in"; +static const struct { + const char *name; + const struct usb_ep_caps caps; +} ep_info[] = { +#define EP_INFO(_name, _caps) \ + { \ + .name = _name, \ + .caps = _caps, \ + } + + EP_INFO(ep0_string, + USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep1in-int", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep2in-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep3in-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep4in-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep5in-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep6in-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep7in-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep8in-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep9in-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep10in-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep11in-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep12in-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep13in-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep14in-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep15in-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), + EP_INFO("ep0out", + USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep1out-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep2out-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep3out-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep4out-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep5out-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep6out-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep7out-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep8out-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep9out-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep10out-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep11out-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep12out-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep13out-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep14out-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), + EP_INFO("ep15out-bulk", + USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), + +#undef EP_INFO +}; + +/* buffer fill mode */ +static int use_dma_bufferfill_mode; +/* tx buffer size for high speed */ +static unsigned long hs_tx_buf = UDC_EPIN_BUFF_SIZE; + +/*---------------------------------------------------------------------------*/ +/* Prints UDC device registers and endpoint irq registers */ +static void print_regs(struct udc *dev) +{ + DBG(dev, "------- Device registers -------\n"); + DBG(dev, "dev config = %08x\n", readl(&dev->regs->cfg)); + DBG(dev, "dev control = %08x\n", readl(&dev->regs->ctl)); + DBG(dev, "dev status = %08x\n", readl(&dev->regs->sts)); + DBG(dev, "\n"); + DBG(dev, "dev int's = %08x\n", readl(&dev->regs->irqsts)); + DBG(dev, "dev intmask = %08x\n", readl(&dev->regs->irqmsk)); + DBG(dev, "\n"); + DBG(dev, "dev ep int's = %08x\n", readl(&dev->regs->ep_irqsts)); + DBG(dev, "dev ep intmask = %08x\n", readl(&dev->regs->ep_irqmsk)); + DBG(dev, "\n"); + DBG(dev, "USE DMA = %d\n", use_dma); + if (use_dma && use_dma_ppb && !use_dma_ppb_du) { + DBG(dev, "DMA mode = PPBNDU (packet per buffer " + "WITHOUT desc. update)\n"); + dev_info(dev->dev, "DMA mode (%s)\n", "PPBNDU"); + } else if (use_dma && use_dma_ppb && use_dma_ppb_du) { + DBG(dev, "DMA mode = PPBDU (packet per buffer " + "WITH desc. update)\n"); + dev_info(dev->dev, "DMA mode (%s)\n", "PPBDU"); + } + if (use_dma && use_dma_bufferfill_mode) { + DBG(dev, "DMA mode = BF (buffer fill mode)\n"); + dev_info(dev->dev, "DMA mode (%s)\n", "BF"); + } + if (!use_dma) + dev_info(dev->dev, "FIFO mode\n"); + DBG(dev, "-------------------------------------------------------\n"); +} + +/* Masks unused interrupts */ +int udc_mask_unused_interrupts(struct udc *dev) +{ + u32 tmp; + + /* mask all dev interrupts */ + tmp = AMD_BIT(UDC_DEVINT_SVC) | + AMD_BIT(UDC_DEVINT_ENUM) | + AMD_BIT(UDC_DEVINT_US) | + AMD_BIT(UDC_DEVINT_UR) | + AMD_BIT(UDC_DEVINT_ES) | + AMD_BIT(UDC_DEVINT_SI) | + AMD_BIT(UDC_DEVINT_SOF)| + AMD_BIT(UDC_DEVINT_SC); + writel(tmp, &dev->regs->irqmsk); + + /* mask all ep interrupts */ + writel(UDC_EPINT_MSK_DISABLE_ALL, &dev->regs->ep_irqmsk); + + return 0; +} +EXPORT_SYMBOL_GPL(udc_mask_unused_interrupts); + +/* Enables endpoint 0 interrupts */ +static int udc_enable_ep0_interrupts(struct udc *dev) +{ + u32 tmp; + + DBG(dev, "udc_enable_ep0_interrupts()\n"); + + /* read irq mask */ + tmp = readl(&dev->regs->ep_irqmsk); + /* enable ep0 irq's */ + tmp &= AMD_UNMASK_BIT(UDC_EPINT_IN_EP0) + & AMD_UNMASK_BIT(UDC_EPINT_OUT_EP0); + writel(tmp, &dev->regs->ep_irqmsk); + + return 0; +} + +/* Enables device interrupts for SET_INTF and SET_CONFIG */ +int udc_enable_dev_setup_interrupts(struct udc *dev) +{ + u32 tmp; + + DBG(dev, "enable device interrupts for setup data\n"); + + /* read irq mask */ + tmp = readl(&dev->regs->irqmsk); + + /* enable SET_INTERFACE, SET_CONFIG and other needed irq's */ + tmp &= AMD_UNMASK_BIT(UDC_DEVINT_SI) + & AMD_UNMASK_BIT(UDC_DEVINT_SC) + & AMD_UNMASK_BIT(UDC_DEVINT_UR) + & AMD_UNMASK_BIT(UDC_DEVINT_SVC) + & AMD_UNMASK_BIT(UDC_DEVINT_ENUM); + writel(tmp, &dev->regs->irqmsk); + + return 0; +} +EXPORT_SYMBOL_GPL(udc_enable_dev_setup_interrupts); + +/* Calculates fifo start of endpoint based on preceding endpoints */ +static int udc_set_txfifo_addr(struct udc_ep *ep) +{ + struct udc *dev; + u32 tmp; + int i; + + if (!ep || !(ep->in)) + return -EINVAL; + + dev = ep->dev; + ep->txfifo = dev->txfifo; + + /* traverse ep's */ + for (i = 0; i < ep->num; i++) { + if (dev->ep[i].regs) { + /* read fifo size */ + tmp = readl(&dev->ep[i].regs->bufin_framenum); + tmp = AMD_GETBITS(tmp, UDC_EPIN_BUFF_SIZE); + ep->txfifo += tmp; + } + } + return 0; +} + +/* CNAK pending field: bit0 = ep0in, bit16 = ep0out */ +static u32 cnak_pending; + +static void UDC_QUEUE_CNAK(struct udc_ep *ep, unsigned num) +{ + if (readl(&ep->regs->ctl) & AMD_BIT(UDC_EPCTL_NAK)) { + DBG(ep->dev, "NAK could not be cleared for ep%d\n", num); + cnak_pending |= 1 << (num); + ep->naking = 1; + } else + cnak_pending = cnak_pending & (~(1 << (num))); +} + + +/* Enables endpoint, is called by gadget driver */ +static int +udc_ep_enable(struct usb_ep *usbep, const struct usb_endpoint_descriptor *desc) +{ + struct udc_ep *ep; + struct udc *dev; + u32 tmp; + unsigned long iflags; + u8 udc_csr_epix; + unsigned maxpacket; + + if (!usbep + || usbep->name == ep0_string + || !desc + || desc->bDescriptorType != USB_DT_ENDPOINT) + return -EINVAL; + + ep = container_of(usbep, struct udc_ep, ep); + dev = ep->dev; + + DBG(dev, "udc_ep_enable() ep %d\n", ep->num); + + if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + spin_lock_irqsave(&dev->lock, iflags); + ep->ep.desc = desc; + + ep->halted = 0; + + /* set traffic type */ + tmp = readl(&dev->ep[ep->num].regs->ctl); + tmp = AMD_ADDBITS(tmp, desc->bmAttributes, UDC_EPCTL_ET); + writel(tmp, &dev->ep[ep->num].regs->ctl); + + /* set max packet size */ + maxpacket = usb_endpoint_maxp(desc); + tmp = readl(&dev->ep[ep->num].regs->bufout_maxpkt); + tmp = AMD_ADDBITS(tmp, maxpacket, UDC_EP_MAX_PKT_SIZE); + ep->ep.maxpacket = maxpacket; + writel(tmp, &dev->ep[ep->num].regs->bufout_maxpkt); + + /* IN ep */ + if (ep->in) { + + /* ep ix in UDC CSR register space */ + udc_csr_epix = ep->num; + + /* set buffer size (tx fifo entries) */ + tmp = readl(&dev->ep[ep->num].regs->bufin_framenum); + /* double buffering: fifo size = 2 x max packet size */ + tmp = AMD_ADDBITS( + tmp, + maxpacket * UDC_EPIN_BUFF_SIZE_MULT + / UDC_DWORD_BYTES, + UDC_EPIN_BUFF_SIZE); + writel(tmp, &dev->ep[ep->num].regs->bufin_framenum); + + /* calc. tx fifo base addr */ + udc_set_txfifo_addr(ep); + + /* flush fifo */ + tmp = readl(&ep->regs->ctl); + tmp |= AMD_BIT(UDC_EPCTL_F); + writel(tmp, &ep->regs->ctl); + + /* OUT ep */ + } else { + /* ep ix in UDC CSR register space */ + udc_csr_epix = ep->num - UDC_CSR_EP_OUT_IX_OFS; + + /* set max packet size UDC CSR */ + tmp = readl(&dev->csr->ne[ep->num - UDC_CSR_EP_OUT_IX_OFS]); + tmp = AMD_ADDBITS(tmp, maxpacket, + UDC_CSR_NE_MAX_PKT); + writel(tmp, &dev->csr->ne[ep->num - UDC_CSR_EP_OUT_IX_OFS]); + + if (use_dma && !ep->in) { + /* alloc and init BNA dummy request */ + ep->bna_dummy_req = udc_alloc_bna_dummy(ep); + ep->bna_occurred = 0; + } + + if (ep->num != UDC_EP0OUT_IX) + dev->data_ep_enabled = 1; + } + + /* set ep values */ + tmp = readl(&dev->csr->ne[udc_csr_epix]); + /* max packet */ + tmp = AMD_ADDBITS(tmp, maxpacket, UDC_CSR_NE_MAX_PKT); + /* ep number */ + tmp = AMD_ADDBITS(tmp, desc->bEndpointAddress, UDC_CSR_NE_NUM); + /* ep direction */ + tmp = AMD_ADDBITS(tmp, ep->in, UDC_CSR_NE_DIR); + /* ep type */ + tmp = AMD_ADDBITS(tmp, desc->bmAttributes, UDC_CSR_NE_TYPE); + /* ep config */ + tmp = AMD_ADDBITS(tmp, ep->dev->cur_config, UDC_CSR_NE_CFG); + /* ep interface */ + tmp = AMD_ADDBITS(tmp, ep->dev->cur_intf, UDC_CSR_NE_INTF); + /* ep alt */ + tmp = AMD_ADDBITS(tmp, ep->dev->cur_alt, UDC_CSR_NE_ALT); + /* write reg */ + writel(tmp, &dev->csr->ne[udc_csr_epix]); + + /* enable ep irq */ + tmp = readl(&dev->regs->ep_irqmsk); + tmp &= AMD_UNMASK_BIT(ep->num); + writel(tmp, &dev->regs->ep_irqmsk); + + /* + * clear NAK by writing CNAK + * avoid BNA for OUT DMA, don't clear NAK until DMA desc. written + */ + if (!use_dma || ep->in) { + tmp = readl(&ep->regs->ctl); + tmp |= AMD_BIT(UDC_EPCTL_CNAK); + writel(tmp, &ep->regs->ctl); + ep->naking = 0; + UDC_QUEUE_CNAK(ep, ep->num); + } + tmp = desc->bEndpointAddress; + DBG(dev, "%s enabled\n", usbep->name); + + spin_unlock_irqrestore(&dev->lock, iflags); + return 0; +} + +/* Resets endpoint */ +static void ep_init(struct udc_regs __iomem *regs, struct udc_ep *ep) +{ + u32 tmp; + + VDBG(ep->dev, "ep-%d reset\n", ep->num); + ep->ep.desc = NULL; + ep->ep.ops = &udc_ep_ops; + INIT_LIST_HEAD(&ep->queue); + + usb_ep_set_maxpacket_limit(&ep->ep,(u16) ~0); + /* set NAK */ + tmp = readl(&ep->regs->ctl); + tmp |= AMD_BIT(UDC_EPCTL_SNAK); + writel(tmp, &ep->regs->ctl); + ep->naking = 1; + + /* disable interrupt */ + tmp = readl(®s->ep_irqmsk); + tmp |= AMD_BIT(ep->num); + writel(tmp, ®s->ep_irqmsk); + + if (ep->in) { + /* unset P and IN bit of potential former DMA */ + tmp = readl(&ep->regs->ctl); + tmp &= AMD_UNMASK_BIT(UDC_EPCTL_P); + writel(tmp, &ep->regs->ctl); + + tmp = readl(&ep->regs->sts); + tmp |= AMD_BIT(UDC_EPSTS_IN); + writel(tmp, &ep->regs->sts); + + /* flush the fifo */ + tmp = readl(&ep->regs->ctl); + tmp |= AMD_BIT(UDC_EPCTL_F); + writel(tmp, &ep->regs->ctl); + + } + /* reset desc pointer */ + writel(0, &ep->regs->desptr); +} + +/* Disables endpoint, is called by gadget driver */ +static int udc_ep_disable(struct usb_ep *usbep) +{ + struct udc_ep *ep = NULL; + unsigned long iflags; + + if (!usbep) + return -EINVAL; + + ep = container_of(usbep, struct udc_ep, ep); + if (usbep->name == ep0_string || !ep->ep.desc) + return -EINVAL; + + DBG(ep->dev, "Disable ep-%d\n", ep->num); + + spin_lock_irqsave(&ep->dev->lock, iflags); + udc_free_request(&ep->ep, &ep->bna_dummy_req->req); + empty_req_queue(ep); + ep_init(ep->dev->regs, ep); + spin_unlock_irqrestore(&ep->dev->lock, iflags); + + return 0; +} + +/* Allocates request packet, called by gadget driver */ +static struct usb_request * +udc_alloc_request(struct usb_ep *usbep, gfp_t gfp) +{ + struct udc_request *req; + struct udc_data_dma *dma_desc; + struct udc_ep *ep; + + if (!usbep) + return NULL; + + ep = container_of(usbep, struct udc_ep, ep); + + VDBG(ep->dev, "udc_alloc_req(): ep%d\n", ep->num); + req = kzalloc(sizeof(struct udc_request), gfp); + if (!req) + return NULL; + + req->req.dma = DMA_DONT_USE; + INIT_LIST_HEAD(&req->queue); + + if (ep->dma) { + /* ep0 in requests are allocated from data pool here */ + dma_desc = dma_pool_alloc(ep->dev->data_requests, gfp, + &req->td_phys); + if (!dma_desc) { + kfree(req); + return NULL; + } + + VDBG(ep->dev, "udc_alloc_req: req = %p dma_desc = %p, " + "td_phys = %lx\n", + req, dma_desc, + (unsigned long)req->td_phys); + /* prevent from using desc. - set HOST BUSY */ + dma_desc->status = AMD_ADDBITS(dma_desc->status, + UDC_DMA_STP_STS_BS_HOST_BUSY, + UDC_DMA_STP_STS_BS); + dma_desc->bufptr = cpu_to_le32(DMA_DONT_USE); + req->td_data = dma_desc; + req->td_data_last = NULL; + req->chain_len = 1; + } + + return &req->req; +} + +/* frees pci pool descriptors of a DMA chain */ +static void udc_free_dma_chain(struct udc *dev, struct udc_request *req) +{ + struct udc_data_dma *td = req->td_data; + unsigned int i; + + dma_addr_t addr_next = 0x00; + dma_addr_t addr = (dma_addr_t)td->next; + + DBG(dev, "free chain req = %p\n", req); + + /* do not free first desc., will be done by free for request */ + for (i = 1; i < req->chain_len; i++) { + td = phys_to_virt(addr); + addr_next = (dma_addr_t)td->next; + dma_pool_free(dev->data_requests, td, addr); + addr = addr_next; + } +} + +/* Frees request packet, called by gadget driver */ +static void +udc_free_request(struct usb_ep *usbep, struct usb_request *usbreq) +{ + struct udc_ep *ep; + struct udc_request *req; + + if (!usbep || !usbreq) + return; + + ep = container_of(usbep, struct udc_ep, ep); + req = container_of(usbreq, struct udc_request, req); + VDBG(ep->dev, "free_req req=%p\n", req); + BUG_ON(!list_empty(&req->queue)); + if (req->td_data) { + VDBG(ep->dev, "req->td_data=%p\n", req->td_data); + + /* free dma chain if created */ + if (req->chain_len > 1) + udc_free_dma_chain(ep->dev, req); + + dma_pool_free(ep->dev->data_requests, req->td_data, + req->td_phys); + } + kfree(req); +} + +/* Init BNA dummy descriptor for HOST BUSY and pointing to itself */ +static void udc_init_bna_dummy(struct udc_request *req) +{ + if (req) { + /* set last bit */ + req->td_data->status |= AMD_BIT(UDC_DMA_IN_STS_L); + /* set next pointer to itself */ + req->td_data->next = req->td_phys; + /* set HOST BUSY */ + req->td_data->status + = AMD_ADDBITS(req->td_data->status, + UDC_DMA_STP_STS_BS_DMA_DONE, + UDC_DMA_STP_STS_BS); +#ifdef UDC_VERBOSE + pr_debug("bna desc = %p, sts = %08x\n", + req->td_data, req->td_data->status); +#endif + } +} + +/* Allocate BNA dummy descriptor */ +static struct udc_request *udc_alloc_bna_dummy(struct udc_ep *ep) +{ + struct udc_request *req = NULL; + struct usb_request *_req = NULL; + + /* alloc the dummy request */ + _req = udc_alloc_request(&ep->ep, GFP_ATOMIC); + if (_req) { + req = container_of(_req, struct udc_request, req); + ep->bna_dummy_req = req; + udc_init_bna_dummy(req); + } + return req; +} + +/* Write data to TX fifo for IN packets */ +static void +udc_txfifo_write(struct udc_ep *ep, struct usb_request *req) +{ + u8 *req_buf; + u32 *buf; + int i, j; + unsigned bytes = 0; + unsigned remaining = 0; + + if (!req || !ep) + return; + + req_buf = req->buf + req->actual; + prefetch(req_buf); + remaining = req->length - req->actual; + + buf = (u32 *) req_buf; + + bytes = ep->ep.maxpacket; + if (bytes > remaining) + bytes = remaining; + + /* dwords first */ + for (i = 0; i < bytes / UDC_DWORD_BYTES; i++) + writel(*(buf + i), ep->txfifo); + + /* remaining bytes must be written by byte access */ + for (j = 0; j < bytes % UDC_DWORD_BYTES; j++) { + writeb((u8)(*(buf + i) >> (j << UDC_BITS_PER_BYTE_SHIFT)), + ep->txfifo); + } + + /* dummy write confirm */ + writel(0, &ep->regs->confirm); +} + +/* Read dwords from RX fifo for OUT transfers */ +static int udc_rxfifo_read_dwords(struct udc *dev, u32 *buf, int dwords) +{ + int i; + + VDBG(dev, "udc_read_dwords(): %d dwords\n", dwords); + + for (i = 0; i < dwords; i++) + *(buf + i) = readl(dev->rxfifo); + return 0; +} + +/* Read bytes from RX fifo for OUT transfers */ +static int udc_rxfifo_read_bytes(struct udc *dev, u8 *buf, int bytes) +{ + int i, j; + u32 tmp; + + VDBG(dev, "udc_read_bytes(): %d bytes\n", bytes); + + /* dwords first */ + for (i = 0; i < bytes / UDC_DWORD_BYTES; i++) + *((u32 *)(buf + (i<<2))) = readl(dev->rxfifo); + + /* remaining bytes must be read by byte access */ + if (bytes % UDC_DWORD_BYTES) { + tmp = readl(dev->rxfifo); + for (j = 0; j < bytes % UDC_DWORD_BYTES; j++) { + *(buf + (i<<2) + j) = (u8)(tmp & UDC_BYTE_MASK); + tmp = tmp >> UDC_BITS_PER_BYTE; + } + } + + return 0; +} + +/* Read data from RX fifo for OUT transfers */ +static int +udc_rxfifo_read(struct udc_ep *ep, struct udc_request *req) +{ + u8 *buf; + unsigned buf_space; + unsigned bytes = 0; + unsigned finished = 0; + + /* received number bytes */ + bytes = readl(&ep->regs->sts); + bytes = AMD_GETBITS(bytes, UDC_EPSTS_RX_PKT_SIZE); + + buf_space = req->req.length - req->req.actual; + buf = req->req.buf + req->req.actual; + if (bytes > buf_space) { + if ((buf_space % ep->ep.maxpacket) != 0) { + DBG(ep->dev, + "%s: rx %d bytes, rx-buf space = %d bytesn\n", + ep->ep.name, bytes, buf_space); + req->req.status = -EOVERFLOW; + } + bytes = buf_space; + } + req->req.actual += bytes; + + /* last packet ? */ + if (((bytes % ep->ep.maxpacket) != 0) || (!bytes) + || ((req->req.actual == req->req.length) && !req->req.zero)) + finished = 1; + + /* read rx fifo bytes */ + VDBG(ep->dev, "ep %s: rxfifo read %d bytes\n", ep->ep.name, bytes); + udc_rxfifo_read_bytes(ep->dev, buf, bytes); + + return finished; +} + +/* Creates or re-inits a DMA chain */ +static int udc_create_dma_chain( + struct udc_ep *ep, + struct udc_request *req, + unsigned long buf_len, gfp_t gfp_flags +) +{ + unsigned long bytes = req->req.length; + unsigned int i; + dma_addr_t dma_addr; + struct udc_data_dma *td = NULL; + struct udc_data_dma *last = NULL; + unsigned long txbytes; + unsigned create_new_chain = 0; + unsigned len; + + VDBG(ep->dev, "udc_create_dma_chain: bytes=%ld buf_len=%ld\n", + bytes, buf_len); + dma_addr = DMA_DONT_USE; + + /* unset L bit in first desc for OUT */ + if (!ep->in) + req->td_data->status &= AMD_CLEAR_BIT(UDC_DMA_IN_STS_L); + + /* alloc only new desc's if not already available */ + len = req->req.length / ep->ep.maxpacket; + if (req->req.length % ep->ep.maxpacket) + len++; + + if (len > req->chain_len) { + /* shorter chain already allocated before */ + if (req->chain_len > 1) + udc_free_dma_chain(ep->dev, req); + req->chain_len = len; + create_new_chain = 1; + } + + td = req->td_data; + /* gen. required number of descriptors and buffers */ + for (i = buf_len; i < bytes; i += buf_len) { + /* create or determine next desc. */ + if (create_new_chain) { + td = dma_pool_alloc(ep->dev->data_requests, + gfp_flags, &dma_addr); + if (!td) + return -ENOMEM; + + td->status = 0; + } else if (i == buf_len) { + /* first td */ + td = (struct udc_data_dma *)phys_to_virt( + req->td_data->next); + td->status = 0; + } else { + td = (struct udc_data_dma *)phys_to_virt(last->next); + td->status = 0; + } + + if (td) + td->bufptr = req->req.dma + i; /* assign buffer */ + else + break; + + /* short packet ? */ + if ((bytes - i) >= buf_len) { + txbytes = buf_len; + } else { + /* short packet */ + txbytes = bytes - i; + } + + /* link td and assign tx bytes */ + if (i == buf_len) { + if (create_new_chain) + req->td_data->next = dma_addr; + /* + * else + * req->td_data->next = virt_to_phys(td); + */ + /* write tx bytes */ + if (ep->in) { + /* first desc */ + req->td_data->status = + AMD_ADDBITS(req->td_data->status, + ep->ep.maxpacket, + UDC_DMA_IN_STS_TXBYTES); + /* second desc */ + td->status = AMD_ADDBITS(td->status, + txbytes, + UDC_DMA_IN_STS_TXBYTES); + } + } else { + if (create_new_chain) + last->next = dma_addr; + /* + * else + * last->next = virt_to_phys(td); + */ + if (ep->in) { + /* write tx bytes */ + td->status = AMD_ADDBITS(td->status, + txbytes, + UDC_DMA_IN_STS_TXBYTES); + } + } + last = td; + } + /* set last bit */ + if (td) { + td->status |= AMD_BIT(UDC_DMA_IN_STS_L); + /* last desc. points to itself */ + req->td_data_last = td; + } + + return 0; +} + +/* create/re-init a DMA descriptor or a DMA descriptor chain */ +static int prep_dma(struct udc_ep *ep, struct udc_request *req, gfp_t gfp) +{ + int retval = 0; + u32 tmp; + + VDBG(ep->dev, "prep_dma\n"); + VDBG(ep->dev, "prep_dma ep%d req->td_data=%p\n", + ep->num, req->td_data); + + /* set buffer pointer */ + req->td_data->bufptr = req->req.dma; + + /* set last bit */ + req->td_data->status |= AMD_BIT(UDC_DMA_IN_STS_L); + + /* build/re-init dma chain if maxpkt scatter mode, not for EP0 */ + if (use_dma_ppb) { + + retval = udc_create_dma_chain(ep, req, ep->ep.maxpacket, gfp); + if (retval != 0) { + if (retval == -ENOMEM) + DBG(ep->dev, "Out of DMA memory\n"); + return retval; + } + if (ep->in) { + if (req->req.length == ep->ep.maxpacket) { + /* write tx bytes */ + req->td_data->status = + AMD_ADDBITS(req->td_data->status, + ep->ep.maxpacket, + UDC_DMA_IN_STS_TXBYTES); + + } + } + + } + + if (ep->in) { + VDBG(ep->dev, "IN: use_dma_ppb=%d req->req.len=%d " + "maxpacket=%d ep%d\n", + use_dma_ppb, req->req.length, + ep->ep.maxpacket, ep->num); + /* + * if bytes < max packet then tx bytes must + * be written in packet per buffer mode + */ + if (!use_dma_ppb || req->req.length < ep->ep.maxpacket + || ep->num == UDC_EP0OUT_IX + || ep->num == UDC_EP0IN_IX) { + /* write tx bytes */ + req->td_data->status = + AMD_ADDBITS(req->td_data->status, + req->req.length, + UDC_DMA_IN_STS_TXBYTES); + /* reset frame num */ + req->td_data->status = + AMD_ADDBITS(req->td_data->status, + 0, + UDC_DMA_IN_STS_FRAMENUM); + } + /* set HOST BUSY */ + req->td_data->status = + AMD_ADDBITS(req->td_data->status, + UDC_DMA_STP_STS_BS_HOST_BUSY, + UDC_DMA_STP_STS_BS); + } else { + VDBG(ep->dev, "OUT set host ready\n"); + /* set HOST READY */ + req->td_data->status = + AMD_ADDBITS(req->td_data->status, + UDC_DMA_STP_STS_BS_HOST_READY, + UDC_DMA_STP_STS_BS); + + /* clear NAK by writing CNAK */ + if (ep->naking) { + tmp = readl(&ep->regs->ctl); + tmp |= AMD_BIT(UDC_EPCTL_CNAK); + writel(tmp, &ep->regs->ctl); + ep->naking = 0; + UDC_QUEUE_CNAK(ep, ep->num); + } + + } + + return retval; +} + +/* Completes request packet ... caller MUST hold lock */ +static void +complete_req(struct udc_ep *ep, struct udc_request *req, int sts) +__releases(ep->dev->lock) +__acquires(ep->dev->lock) +{ + struct udc *dev; + unsigned halted; + + VDBG(ep->dev, "complete_req(): ep%d\n", ep->num); + + dev = ep->dev; + /* unmap DMA */ + if (ep->dma) + usb_gadget_unmap_request(&dev->gadget, &req->req, ep->in); + + halted = ep->halted; + ep->halted = 1; + + /* set new status if pending */ + if (req->req.status == -EINPROGRESS) + req->req.status = sts; + + /* remove from ep queue */ + list_del_init(&req->queue); + + VDBG(ep->dev, "req %p => complete %d bytes at %s with sts %d\n", + &req->req, req->req.length, ep->ep.name, sts); + + spin_unlock(&dev->lock); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&dev->lock); + ep->halted = halted; +} + +/* Iterates to the end of a DMA chain and returns last descriptor */ +static struct udc_data_dma *udc_get_last_dma_desc(struct udc_request *req) +{ + struct udc_data_dma *td; + + td = req->td_data; + while (td && !(td->status & AMD_BIT(UDC_DMA_IN_STS_L))) + td = phys_to_virt(td->next); + + return td; + +} + +/* Iterates to the end of a DMA chain and counts bytes received */ +static u32 udc_get_ppbdu_rxbytes(struct udc_request *req) +{ + struct udc_data_dma *td; + u32 count; + + td = req->td_data; + /* received number bytes */ + count = AMD_GETBITS(td->status, UDC_DMA_OUT_STS_RXBYTES); + + while (td && !(td->status & AMD_BIT(UDC_DMA_IN_STS_L))) { + td = phys_to_virt(td->next); + /* received number bytes */ + if (td) { + count += AMD_GETBITS(td->status, + UDC_DMA_OUT_STS_RXBYTES); + } + } + + return count; + +} + +/* Enabling RX DMA */ +static void udc_set_rde(struct udc *dev) +{ + u32 tmp; + + VDBG(dev, "udc_set_rde()\n"); + /* stop RDE timer */ + if (timer_pending(&udc_timer)) { + set_rde = 0; + mod_timer(&udc_timer, jiffies - 1); + } + /* set RDE */ + tmp = readl(&dev->regs->ctl); + tmp |= AMD_BIT(UDC_DEVCTL_RDE); + writel(tmp, &dev->regs->ctl); +} + +/* Queues a request packet, called by gadget driver */ +static int +udc_queue(struct usb_ep *usbep, struct usb_request *usbreq, gfp_t gfp) +{ + int retval = 0; + u8 open_rxfifo = 0; + unsigned long iflags; + struct udc_ep *ep; + struct udc_request *req; + struct udc *dev; + u32 tmp; + + /* check the inputs */ + req = container_of(usbreq, struct udc_request, req); + + if (!usbep || !usbreq || !usbreq->complete || !usbreq->buf + || !list_empty(&req->queue)) + return -EINVAL; + + ep = container_of(usbep, struct udc_ep, ep); + if (!ep->ep.desc && (ep->num != 0 && ep->num != UDC_EP0OUT_IX)) + return -EINVAL; + + VDBG(ep->dev, "udc_queue(): ep%d-in=%d\n", ep->num, ep->in); + dev = ep->dev; + + if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + /* map dma (usually done before) */ + if (ep->dma) { + VDBG(dev, "DMA map req %p\n", req); + retval = usb_gadget_map_request(&udc->gadget, usbreq, ep->in); + if (retval) + return retval; + } + + VDBG(dev, "%s queue req %p, len %d req->td_data=%p buf %p\n", + usbep->name, usbreq, usbreq->length, + req->td_data, usbreq->buf); + + spin_lock_irqsave(&dev->lock, iflags); + usbreq->actual = 0; + usbreq->status = -EINPROGRESS; + req->dma_done = 0; + + /* on empty queue just do first transfer */ + if (list_empty(&ep->queue)) { + /* zlp */ + if (usbreq->length == 0) { + /* IN zlp's are handled by hardware */ + complete_req(ep, req, 0); + VDBG(dev, "%s: zlp\n", ep->ep.name); + /* + * if set_config or set_intf is waiting for ack by zlp + * then set CSR_DONE + */ + if (dev->set_cfg_not_acked) { + tmp = readl(&dev->regs->ctl); + tmp |= AMD_BIT(UDC_DEVCTL_CSR_DONE); + writel(tmp, &dev->regs->ctl); + dev->set_cfg_not_acked = 0; + } + /* setup command is ACK'ed now by zlp */ + if (dev->waiting_zlp_ack_ep0in) { + /* clear NAK by writing CNAK in EP0_IN */ + tmp = readl(&dev->ep[UDC_EP0IN_IX].regs->ctl); + tmp |= AMD_BIT(UDC_EPCTL_CNAK); + writel(tmp, &dev->ep[UDC_EP0IN_IX].regs->ctl); + dev->ep[UDC_EP0IN_IX].naking = 0; + UDC_QUEUE_CNAK(&dev->ep[UDC_EP0IN_IX], + UDC_EP0IN_IX); + dev->waiting_zlp_ack_ep0in = 0; + } + goto finished; + } + if (ep->dma) { + retval = prep_dma(ep, req, GFP_ATOMIC); + if (retval != 0) + goto finished; + /* write desc pointer to enable DMA */ + if (ep->in) { + /* set HOST READY */ + req->td_data->status = + AMD_ADDBITS(req->td_data->status, + UDC_DMA_IN_STS_BS_HOST_READY, + UDC_DMA_IN_STS_BS); + } + + /* disabled rx dma while descriptor update */ + if (!ep->in) { + /* stop RDE timer */ + if (timer_pending(&udc_timer)) { + set_rde = 0; + mod_timer(&udc_timer, jiffies - 1); + } + /* clear RDE */ + tmp = readl(&dev->regs->ctl); + tmp &= AMD_UNMASK_BIT(UDC_DEVCTL_RDE); + writel(tmp, &dev->regs->ctl); + open_rxfifo = 1; + + /* + * if BNA occurred then let BNA dummy desc. + * point to current desc. + */ + if (ep->bna_occurred) { + VDBG(dev, "copy to BNA dummy desc.\n"); + memcpy(ep->bna_dummy_req->td_data, + req->td_data, + sizeof(struct udc_data_dma)); + } + } + /* write desc pointer */ + writel(req->td_phys, &ep->regs->desptr); + + /* clear NAK by writing CNAK */ + if (ep->naking) { + tmp = readl(&ep->regs->ctl); + tmp |= AMD_BIT(UDC_EPCTL_CNAK); + writel(tmp, &ep->regs->ctl); + ep->naking = 0; + UDC_QUEUE_CNAK(ep, ep->num); + } + + if (ep->in) { + /* enable ep irq */ + tmp = readl(&dev->regs->ep_irqmsk); + tmp &= AMD_UNMASK_BIT(ep->num); + writel(tmp, &dev->regs->ep_irqmsk); + } + } else if (ep->in) { + /* enable ep irq */ + tmp = readl(&dev->regs->ep_irqmsk); + tmp &= AMD_UNMASK_BIT(ep->num); + writel(tmp, &dev->regs->ep_irqmsk); + } + + } else if (ep->dma) { + + /* + * prep_dma not used for OUT ep's, this is not possible + * for PPB modes, because of chain creation reasons + */ + if (ep->in) { + retval = prep_dma(ep, req, GFP_ATOMIC); + if (retval != 0) + goto finished; + } + } + VDBG(dev, "list_add\n"); + /* add request to ep queue */ + if (req) { + + list_add_tail(&req->queue, &ep->queue); + + /* open rxfifo if out data queued */ + if (open_rxfifo) { + /* enable DMA */ + req->dma_going = 1; + udc_set_rde(dev); + if (ep->num != UDC_EP0OUT_IX) + dev->data_ep_queued = 1; + } + /* stop OUT naking */ + if (!ep->in) { + if (!use_dma && udc_rxfifo_pending) { + DBG(dev, "udc_queue(): pending bytes in " + "rxfifo after nyet\n"); + /* + * read pending bytes afer nyet: + * referring to isr + */ + if (udc_rxfifo_read(ep, req)) { + /* finish */ + complete_req(ep, req, 0); + } + udc_rxfifo_pending = 0; + + } + } + } + +finished: + spin_unlock_irqrestore(&dev->lock, iflags); + return retval; +} + +/* Empty request queue of an endpoint; caller holds spinlock */ +void empty_req_queue(struct udc_ep *ep) +{ + struct udc_request *req; + + ep->halted = 1; + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, + struct udc_request, + queue); + complete_req(ep, req, -ESHUTDOWN); + } +} +EXPORT_SYMBOL_GPL(empty_req_queue); + +/* Dequeues a request packet, called by gadget driver */ +static int udc_dequeue(struct usb_ep *usbep, struct usb_request *usbreq) +{ + struct udc_ep *ep; + struct udc_request *req; + unsigned halted; + unsigned long iflags; + + ep = container_of(usbep, struct udc_ep, ep); + if (!usbep || !usbreq || (!ep->ep.desc && (ep->num != 0 + && ep->num != UDC_EP0OUT_IX))) + return -EINVAL; + + req = container_of(usbreq, struct udc_request, req); + + spin_lock_irqsave(&ep->dev->lock, iflags); + halted = ep->halted; + ep->halted = 1; + /* request in processing or next one */ + if (ep->queue.next == &req->queue) { + if (ep->dma && req->dma_going) { + if (ep->in) + ep->cancel_transfer = 1; + else { + u32 tmp; + u32 dma_sts; + /* stop potential receive DMA */ + tmp = readl(&udc->regs->ctl); + writel(tmp & AMD_UNMASK_BIT(UDC_DEVCTL_RDE), + &udc->regs->ctl); + /* + * Cancel transfer later in ISR + * if descriptor was touched. + */ + dma_sts = AMD_GETBITS(req->td_data->status, + UDC_DMA_OUT_STS_BS); + if (dma_sts != UDC_DMA_OUT_STS_BS_HOST_READY) + ep->cancel_transfer = 1; + else { + udc_init_bna_dummy(ep->req); + writel(ep->bna_dummy_req->td_phys, + &ep->regs->desptr); + } + writel(tmp, &udc->regs->ctl); + } + } + } + complete_req(ep, req, -ECONNRESET); + ep->halted = halted; + + spin_unlock_irqrestore(&ep->dev->lock, iflags); + return 0; +} + +/* Halt or clear halt of endpoint */ +static int +udc_set_halt(struct usb_ep *usbep, int halt) +{ + struct udc_ep *ep; + u32 tmp; + unsigned long iflags; + int retval = 0; + + if (!usbep) + return -EINVAL; + + pr_debug("set_halt %s: halt=%d\n", usbep->name, halt); + + ep = container_of(usbep, struct udc_ep, ep); + if (!ep->ep.desc && (ep->num != 0 && ep->num != UDC_EP0OUT_IX)) + return -EINVAL; + if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + spin_lock_irqsave(&udc_stall_spinlock, iflags); + /* halt or clear halt */ + if (halt) { + if (ep->num == 0) + ep->dev->stall_ep0in = 1; + else { + /* + * set STALL + * rxfifo empty not taken into acount + */ + tmp = readl(&ep->regs->ctl); + tmp |= AMD_BIT(UDC_EPCTL_S); + writel(tmp, &ep->regs->ctl); + ep->halted = 1; + + /* setup poll timer */ + if (!timer_pending(&udc_pollstall_timer)) { + udc_pollstall_timer.expires = jiffies + + HZ * UDC_POLLSTALL_TIMER_USECONDS + / (1000 * 1000); + if (!stop_pollstall_timer) { + DBG(ep->dev, "start polltimer\n"); + add_timer(&udc_pollstall_timer); + } + } + } + } else { + /* ep is halted by set_halt() before */ + if (ep->halted) { + tmp = readl(&ep->regs->ctl); + /* clear stall bit */ + tmp = tmp & AMD_CLEAR_BIT(UDC_EPCTL_S); + /* clear NAK by writing CNAK */ + tmp |= AMD_BIT(UDC_EPCTL_CNAK); + writel(tmp, &ep->regs->ctl); + ep->halted = 0; + UDC_QUEUE_CNAK(ep, ep->num); + } + } + spin_unlock_irqrestore(&udc_stall_spinlock, iflags); + return retval; +} + +/* gadget interface */ +static const struct usb_ep_ops udc_ep_ops = { + .enable = udc_ep_enable, + .disable = udc_ep_disable, + + .alloc_request = udc_alloc_request, + .free_request = udc_free_request, + + .queue = udc_queue, + .dequeue = udc_dequeue, + + .set_halt = udc_set_halt, + /* fifo ops not implemented */ +}; + +/*-------------------------------------------------------------------------*/ + +/* Get frame counter (not implemented) */ +static int udc_get_frame(struct usb_gadget *gadget) +{ + return -EOPNOTSUPP; +} + +/* Initiates a remote wakeup */ +static int udc_remote_wakeup(struct udc *dev) +{ + unsigned long flags; + u32 tmp; + + DBG(dev, "UDC initiates remote wakeup\n"); + + spin_lock_irqsave(&dev->lock, flags); + + tmp = readl(&dev->regs->ctl); + tmp |= AMD_BIT(UDC_DEVCTL_RES); + writel(tmp, &dev->regs->ctl); + tmp &= AMD_CLEAR_BIT(UDC_DEVCTL_RES); + writel(tmp, &dev->regs->ctl); + + spin_unlock_irqrestore(&dev->lock, flags); + return 0; +} + +/* Remote wakeup gadget interface */ +static int udc_wakeup(struct usb_gadget *gadget) +{ + struct udc *dev; + + if (!gadget) + return -EINVAL; + dev = container_of(gadget, struct udc, gadget); + udc_remote_wakeup(dev); + + return 0; +} + +static int amd5536_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver); +static int amd5536_udc_stop(struct usb_gadget *g); + +static const struct usb_gadget_ops udc_ops = { + .wakeup = udc_wakeup, + .get_frame = udc_get_frame, + .udc_start = amd5536_udc_start, + .udc_stop = amd5536_udc_stop, +}; + +/* Setups endpoint parameters, adds endpoints to linked list */ +static void make_ep_lists(struct udc *dev) +{ + /* make gadget ep lists */ + INIT_LIST_HEAD(&dev->gadget.ep_list); + list_add_tail(&dev->ep[UDC_EPIN_STATUS_IX].ep.ep_list, + &dev->gadget.ep_list); + list_add_tail(&dev->ep[UDC_EPIN_IX].ep.ep_list, + &dev->gadget.ep_list); + list_add_tail(&dev->ep[UDC_EPOUT_IX].ep.ep_list, + &dev->gadget.ep_list); + + /* fifo config */ + dev->ep[UDC_EPIN_STATUS_IX].fifo_depth = UDC_EPIN_SMALLINT_BUFF_SIZE; + if (dev->gadget.speed == USB_SPEED_FULL) + dev->ep[UDC_EPIN_IX].fifo_depth = UDC_FS_EPIN_BUFF_SIZE; + else if (dev->gadget.speed == USB_SPEED_HIGH) + dev->ep[UDC_EPIN_IX].fifo_depth = hs_tx_buf; + dev->ep[UDC_EPOUT_IX].fifo_depth = UDC_RXFIFO_SIZE; +} + +/* Inits UDC context */ +void udc_basic_init(struct udc *dev) +{ + u32 tmp; + + DBG(dev, "udc_basic_init()\n"); + + dev->gadget.speed = USB_SPEED_UNKNOWN; + + /* stop RDE timer */ + if (timer_pending(&udc_timer)) { + set_rde = 0; + mod_timer(&udc_timer, jiffies - 1); + } + /* stop poll stall timer */ + if (timer_pending(&udc_pollstall_timer)) + mod_timer(&udc_pollstall_timer, jiffies - 1); + /* disable DMA */ + tmp = readl(&dev->regs->ctl); + tmp &= AMD_UNMASK_BIT(UDC_DEVCTL_RDE); + tmp &= AMD_UNMASK_BIT(UDC_DEVCTL_TDE); + writel(tmp, &dev->regs->ctl); + + /* enable dynamic CSR programming */ + tmp = readl(&dev->regs->cfg); + tmp |= AMD_BIT(UDC_DEVCFG_CSR_PRG); + /* set self powered */ + tmp |= AMD_BIT(UDC_DEVCFG_SP); + /* set remote wakeupable */ + tmp |= AMD_BIT(UDC_DEVCFG_RWKP); + writel(tmp, &dev->regs->cfg); + + make_ep_lists(dev); + + dev->data_ep_enabled = 0; + dev->data_ep_queued = 0; +} +EXPORT_SYMBOL_GPL(udc_basic_init); + +/* init registers at driver load time */ +static int startup_registers(struct udc *dev) +{ + u32 tmp; + + /* init controller by soft reset */ + udc_soft_reset(dev); + + /* mask not needed interrupts */ + udc_mask_unused_interrupts(dev); + + /* put into initial config */ + udc_basic_init(dev); + /* link up all endpoints */ + udc_setup_endpoints(dev); + + /* program speed */ + tmp = readl(&dev->regs->cfg); + if (use_fullspeed) + tmp = AMD_ADDBITS(tmp, UDC_DEVCFG_SPD_FS, UDC_DEVCFG_SPD); + else + tmp = AMD_ADDBITS(tmp, UDC_DEVCFG_SPD_HS, UDC_DEVCFG_SPD); + writel(tmp, &dev->regs->cfg); + + return 0; +} + +/* Sets initial endpoint parameters */ +static void udc_setup_endpoints(struct udc *dev) +{ + struct udc_ep *ep; + u32 tmp; + u32 reg; + + DBG(dev, "udc_setup_endpoints()\n"); + + /* read enum speed */ + tmp = readl(&dev->regs->sts); + tmp = AMD_GETBITS(tmp, UDC_DEVSTS_ENUM_SPEED); + if (tmp == UDC_DEVSTS_ENUM_SPEED_HIGH) + dev->gadget.speed = USB_SPEED_HIGH; + else if (tmp == UDC_DEVSTS_ENUM_SPEED_FULL) + dev->gadget.speed = USB_SPEED_FULL; + + /* set basic ep parameters */ + for (tmp = 0; tmp < UDC_EP_NUM; tmp++) { + ep = &dev->ep[tmp]; + ep->dev = dev; + ep->ep.name = ep_info[tmp].name; + ep->ep.caps = ep_info[tmp].caps; + ep->num = tmp; + /* txfifo size is calculated at enable time */ + ep->txfifo = dev->txfifo; + + /* fifo size */ + if (tmp < UDC_EPIN_NUM) { + ep->fifo_depth = UDC_TXFIFO_SIZE; + ep->in = 1; + } else { + ep->fifo_depth = UDC_RXFIFO_SIZE; + ep->in = 0; + + } + ep->regs = &dev->ep_regs[tmp]; + /* + * ep will be reset only if ep was not enabled before to avoid + * disabling ep interrupts when ENUM interrupt occurs but ep is + * not enabled by gadget driver + */ + if (!ep->ep.desc) + ep_init(dev->regs, ep); + + if (use_dma) { + /* + * ep->dma is not really used, just to indicate that + * DMA is active: remove this + * dma regs = dev control regs + */ + ep->dma = &dev->regs->ctl; + + /* nak OUT endpoints until enable - not for ep0 */ + if (tmp != UDC_EP0IN_IX && tmp != UDC_EP0OUT_IX + && tmp > UDC_EPIN_NUM) { + /* set NAK */ + reg = readl(&dev->ep[tmp].regs->ctl); + reg |= AMD_BIT(UDC_EPCTL_SNAK); + writel(reg, &dev->ep[tmp].regs->ctl); + dev->ep[tmp].naking = 1; + + } + } + } + /* EP0 max packet */ + if (dev->gadget.speed == USB_SPEED_FULL) { + usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0IN_IX].ep, + UDC_FS_EP0IN_MAX_PKT_SIZE); + usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0OUT_IX].ep, + UDC_FS_EP0OUT_MAX_PKT_SIZE); + } else if (dev->gadget.speed == USB_SPEED_HIGH) { + usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0IN_IX].ep, + UDC_EP0IN_MAX_PKT_SIZE); + usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0OUT_IX].ep, + UDC_EP0OUT_MAX_PKT_SIZE); + } + + /* + * with suspend bug workaround, ep0 params for gadget driver + * are set at gadget driver bind() call + */ + dev->gadget.ep0 = &dev->ep[UDC_EP0IN_IX].ep; + dev->ep[UDC_EP0IN_IX].halted = 0; + INIT_LIST_HEAD(&dev->gadget.ep0->ep_list); + + /* init cfg/alt/int */ + dev->cur_config = 0; + dev->cur_intf = 0; + dev->cur_alt = 0; +} + +/* Bringup after Connect event, initial bringup to be ready for ep0 events */ +static void usb_connect(struct udc *dev) +{ + /* Return if already connected */ + if (dev->connected) + return; + + dev_info(dev->dev, "USB Connect\n"); + + dev->connected = 1; + + /* put into initial config */ + udc_basic_init(dev); + + /* enable device setup interrupts */ + udc_enable_dev_setup_interrupts(dev); +} + +/* + * Calls gadget with disconnect event and resets the UDC and makes + * initial bringup to be ready for ep0 events + */ +static void usb_disconnect(struct udc *dev) +{ + u32 tmp; + + /* Return if already disconnected */ + if (!dev->connected) + return; + + dev_info(dev->dev, "USB Disconnect\n"); + + dev->connected = 0; + + /* mask interrupts */ + udc_mask_unused_interrupts(dev); + + if (dev->driver) { + spin_unlock(&dev->lock); + dev->driver->disconnect(&dev->gadget); + spin_lock(&dev->lock); + + /* empty queues */ + for (tmp = 0; tmp < UDC_EP_NUM; tmp++) + empty_req_queue(&dev->ep[tmp]); + } + + /* disable ep0 */ + ep_init(dev->regs, &dev->ep[UDC_EP0IN_IX]); + + if (!soft_reset_occured) { + /* init controller by soft reset */ + udc_soft_reset(dev); + soft_reset_occured++; + } + + /* re-enable dev interrupts */ + udc_enable_dev_setup_interrupts(dev); + /* back to full speed ? */ + if (use_fullspeed) { + tmp = readl(&dev->regs->cfg); + tmp = AMD_ADDBITS(tmp, UDC_DEVCFG_SPD_FS, UDC_DEVCFG_SPD); + writel(tmp, &dev->regs->cfg); + } +} + +/* Reset the UDC core */ +static void udc_soft_reset(struct udc *dev) +{ + unsigned long flags; + + DBG(dev, "Soft reset\n"); + /* + * reset possible waiting interrupts, because int. + * status is lost after soft reset, + * ep int. status reset + */ + writel(UDC_EPINT_MSK_DISABLE_ALL, &dev->regs->ep_irqsts); + /* device int. status reset */ + writel(UDC_DEV_MSK_DISABLE, &dev->regs->irqsts); + + /* Don't do this for Broadcom UDC since this is a reserved + * bit. + */ + if (dev->chiprev != UDC_BCM_REV) { + spin_lock_irqsave(&udc_irq_spinlock, flags); + writel(AMD_BIT(UDC_DEVCFG_SOFTRESET), &dev->regs->cfg); + readl(&dev->regs->cfg); + spin_unlock_irqrestore(&udc_irq_spinlock, flags); + } +} + +/* RDE timer callback to set RDE bit */ +static void udc_timer_function(struct timer_list *unused) +{ + u32 tmp; + + spin_lock_irq(&udc_irq_spinlock); + + if (set_rde > 0) { + /* + * open the fifo if fifo was filled on last timer call + * conditionally + */ + if (set_rde > 1) { + /* set RDE to receive setup data */ + tmp = readl(&udc->regs->ctl); + tmp |= AMD_BIT(UDC_DEVCTL_RDE); + writel(tmp, &udc->regs->ctl); + set_rde = -1; + } else if (readl(&udc->regs->sts) + & AMD_BIT(UDC_DEVSTS_RXFIFO_EMPTY)) { + /* + * if fifo empty setup polling, do not just + * open the fifo + */ + udc_timer.expires = jiffies + HZ/UDC_RDE_TIMER_DIV; + if (!stop_timer) + add_timer(&udc_timer); + } else { + /* + * fifo contains data now, setup timer for opening + * the fifo when timer expires to be able to receive + * setup packets, when data packets gets queued by + * gadget layer then timer will forced to expire with + * set_rde=0 (RDE is set in udc_queue()) + */ + set_rde++; + /* debug: lhadmot_timer_start = 221070 */ + udc_timer.expires = jiffies + HZ*UDC_RDE_TIMER_SECONDS; + if (!stop_timer) + add_timer(&udc_timer); + } + + } else + set_rde = -1; /* RDE was set by udc_queue() */ + spin_unlock_irq(&udc_irq_spinlock); + if (stop_timer) + complete(&on_exit); + +} + +/* Handle halt state, used in stall poll timer */ +static void udc_handle_halt_state(struct udc_ep *ep) +{ + u32 tmp; + /* set stall as long not halted */ + if (ep->halted == 1) { + tmp = readl(&ep->regs->ctl); + /* STALL cleared ? */ + if (!(tmp & AMD_BIT(UDC_EPCTL_S))) { + /* + * FIXME: MSC spec requires that stall remains + * even on receivng of CLEAR_FEATURE HALT. So + * we would set STALL again here to be compliant. + * But with current mass storage drivers this does + * not work (would produce endless host retries). + * So we clear halt on CLEAR_FEATURE. + * + DBG(ep->dev, "ep %d: set STALL again\n", ep->num); + tmp |= AMD_BIT(UDC_EPCTL_S); + writel(tmp, &ep->regs->ctl);*/ + + /* clear NAK by writing CNAK */ + tmp |= AMD_BIT(UDC_EPCTL_CNAK); + writel(tmp, &ep->regs->ctl); + ep->halted = 0; + UDC_QUEUE_CNAK(ep, ep->num); + } + } +} + +/* Stall timer callback to poll S bit and set it again after */ +static void udc_pollstall_timer_function(struct timer_list *unused) +{ + struct udc_ep *ep; + int halted = 0; + + spin_lock_irq(&udc_stall_spinlock); + /* + * only one IN and OUT endpoints are handled + * IN poll stall + */ + ep = &udc->ep[UDC_EPIN_IX]; + udc_handle_halt_state(ep); + if (ep->halted) + halted = 1; + /* OUT poll stall */ + ep = &udc->ep[UDC_EPOUT_IX]; + udc_handle_halt_state(ep); + if (ep->halted) + halted = 1; + + /* setup timer again when still halted */ + if (!stop_pollstall_timer && halted) { + udc_pollstall_timer.expires = jiffies + + HZ * UDC_POLLSTALL_TIMER_USECONDS + / (1000 * 1000); + add_timer(&udc_pollstall_timer); + } + spin_unlock_irq(&udc_stall_spinlock); + + if (stop_pollstall_timer) + complete(&on_pollstall_exit); +} + +/* Inits endpoint 0 so that SETUP packets are processed */ +static void activate_control_endpoints(struct udc *dev) +{ + u32 tmp; + + DBG(dev, "activate_control_endpoints\n"); + + /* flush fifo */ + tmp = readl(&dev->ep[UDC_EP0IN_IX].regs->ctl); + tmp |= AMD_BIT(UDC_EPCTL_F); + writel(tmp, &dev->ep[UDC_EP0IN_IX].regs->ctl); + + /* set ep0 directions */ + dev->ep[UDC_EP0IN_IX].in = 1; + dev->ep[UDC_EP0OUT_IX].in = 0; + + /* set buffer size (tx fifo entries) of EP0_IN */ + tmp = readl(&dev->ep[UDC_EP0IN_IX].regs->bufin_framenum); + if (dev->gadget.speed == USB_SPEED_FULL) + tmp = AMD_ADDBITS(tmp, UDC_FS_EPIN0_BUFF_SIZE, + UDC_EPIN_BUFF_SIZE); + else if (dev->gadget.speed == USB_SPEED_HIGH) + tmp = AMD_ADDBITS(tmp, UDC_EPIN0_BUFF_SIZE, + UDC_EPIN_BUFF_SIZE); + writel(tmp, &dev->ep[UDC_EP0IN_IX].regs->bufin_framenum); + + /* set max packet size of EP0_IN */ + tmp = readl(&dev->ep[UDC_EP0IN_IX].regs->bufout_maxpkt); + if (dev->gadget.speed == USB_SPEED_FULL) + tmp = AMD_ADDBITS(tmp, UDC_FS_EP0IN_MAX_PKT_SIZE, + UDC_EP_MAX_PKT_SIZE); + else if (dev->gadget.speed == USB_SPEED_HIGH) + tmp = AMD_ADDBITS(tmp, UDC_EP0IN_MAX_PKT_SIZE, + UDC_EP_MAX_PKT_SIZE); + writel(tmp, &dev->ep[UDC_EP0IN_IX].regs->bufout_maxpkt); + + /* set max packet size of EP0_OUT */ + tmp = readl(&dev->ep[UDC_EP0OUT_IX].regs->bufout_maxpkt); + if (dev->gadget.speed == USB_SPEED_FULL) + tmp = AMD_ADDBITS(tmp, UDC_FS_EP0OUT_MAX_PKT_SIZE, + UDC_EP_MAX_PKT_SIZE); + else if (dev->gadget.speed == USB_SPEED_HIGH) + tmp = AMD_ADDBITS(tmp, UDC_EP0OUT_MAX_PKT_SIZE, + UDC_EP_MAX_PKT_SIZE); + writel(tmp, &dev->ep[UDC_EP0OUT_IX].regs->bufout_maxpkt); + + /* set max packet size of EP0 in UDC CSR */ + tmp = readl(&dev->csr->ne[0]); + if (dev->gadget.speed == USB_SPEED_FULL) + tmp = AMD_ADDBITS(tmp, UDC_FS_EP0OUT_MAX_PKT_SIZE, + UDC_CSR_NE_MAX_PKT); + else if (dev->gadget.speed == USB_SPEED_HIGH) + tmp = AMD_ADDBITS(tmp, UDC_EP0OUT_MAX_PKT_SIZE, + UDC_CSR_NE_MAX_PKT); + writel(tmp, &dev->csr->ne[0]); + + if (use_dma) { + dev->ep[UDC_EP0OUT_IX].td->status |= + AMD_BIT(UDC_DMA_OUT_STS_L); + /* write dma desc address */ + writel(dev->ep[UDC_EP0OUT_IX].td_stp_dma, + &dev->ep[UDC_EP0OUT_IX].regs->subptr); + writel(dev->ep[UDC_EP0OUT_IX].td_phys, + &dev->ep[UDC_EP0OUT_IX].regs->desptr); + /* stop RDE timer */ + if (timer_pending(&udc_timer)) { + set_rde = 0; + mod_timer(&udc_timer, jiffies - 1); + } + /* stop pollstall timer */ + if (timer_pending(&udc_pollstall_timer)) + mod_timer(&udc_pollstall_timer, jiffies - 1); + /* enable DMA */ + tmp = readl(&dev->regs->ctl); + tmp |= AMD_BIT(UDC_DEVCTL_MODE) + | AMD_BIT(UDC_DEVCTL_RDE) + | AMD_BIT(UDC_DEVCTL_TDE); + if (use_dma_bufferfill_mode) + tmp |= AMD_BIT(UDC_DEVCTL_BF); + else if (use_dma_ppb_du) + tmp |= AMD_BIT(UDC_DEVCTL_DU); + writel(tmp, &dev->regs->ctl); + } + + /* clear NAK by writing CNAK for EP0IN */ + tmp = readl(&dev->ep[UDC_EP0IN_IX].regs->ctl); + tmp |= AMD_BIT(UDC_EPCTL_CNAK); + writel(tmp, &dev->ep[UDC_EP0IN_IX].regs->ctl); + dev->ep[UDC_EP0IN_IX].naking = 0; + UDC_QUEUE_CNAK(&dev->ep[UDC_EP0IN_IX], UDC_EP0IN_IX); + + /* clear NAK by writing CNAK for EP0OUT */ + tmp = readl(&dev->ep[UDC_EP0OUT_IX].regs->ctl); + tmp |= AMD_BIT(UDC_EPCTL_CNAK); + writel(tmp, &dev->ep[UDC_EP0OUT_IX].regs->ctl); + dev->ep[UDC_EP0OUT_IX].naking = 0; + UDC_QUEUE_CNAK(&dev->ep[UDC_EP0OUT_IX], UDC_EP0OUT_IX); +} + +/* Make endpoint 0 ready for control traffic */ +static int setup_ep0(struct udc *dev) +{ + activate_control_endpoints(dev); + /* enable ep0 interrupts */ + udc_enable_ep0_interrupts(dev); + /* enable device setup interrupts */ + udc_enable_dev_setup_interrupts(dev); + + return 0; +} + +/* Called by gadget driver to register itself */ +static int amd5536_udc_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) +{ + struct udc *dev = to_amd5536_udc(g); + u32 tmp; + + dev->driver = driver; + + /* Some gadget drivers use both ep0 directions. + * NOTE: to gadget driver, ep0 is just one endpoint... + */ + dev->ep[UDC_EP0OUT_IX].ep.driver_data = + dev->ep[UDC_EP0IN_IX].ep.driver_data; + + /* get ready for ep0 traffic */ + setup_ep0(dev); + + /* clear SD */ + tmp = readl(&dev->regs->ctl); + tmp = tmp & AMD_CLEAR_BIT(UDC_DEVCTL_SD); + writel(tmp, &dev->regs->ctl); + + usb_connect(dev); + + return 0; +} + +/* shutdown requests and disconnect from gadget */ +static void +shutdown(struct udc *dev, struct usb_gadget_driver *driver) +__releases(dev->lock) +__acquires(dev->lock) +{ + int tmp; + + /* empty queues and init hardware */ + udc_basic_init(dev); + + for (tmp = 0; tmp < UDC_EP_NUM; tmp++) + empty_req_queue(&dev->ep[tmp]); + + udc_setup_endpoints(dev); +} + +/* Called by gadget driver to unregister itself */ +static int amd5536_udc_stop(struct usb_gadget *g) +{ + struct udc *dev = to_amd5536_udc(g); + unsigned long flags; + u32 tmp; + + spin_lock_irqsave(&dev->lock, flags); + udc_mask_unused_interrupts(dev); + shutdown(dev, NULL); + spin_unlock_irqrestore(&dev->lock, flags); + + dev->driver = NULL; + + /* set SD */ + tmp = readl(&dev->regs->ctl); + tmp |= AMD_BIT(UDC_DEVCTL_SD); + writel(tmp, &dev->regs->ctl); + + return 0; +} + +/* Clear pending NAK bits */ +static void udc_process_cnak_queue(struct udc *dev) +{ + u32 tmp; + u32 reg; + + /* check epin's */ + DBG(dev, "CNAK pending queue processing\n"); + for (tmp = 0; tmp < UDC_EPIN_NUM_USED; tmp++) { + if (cnak_pending & (1 << tmp)) { + DBG(dev, "CNAK pending for ep%d\n", tmp); + /* clear NAK by writing CNAK */ + reg = readl(&dev->ep[tmp].regs->ctl); + reg |= AMD_BIT(UDC_EPCTL_CNAK); + writel(reg, &dev->ep[tmp].regs->ctl); + dev->ep[tmp].naking = 0; + UDC_QUEUE_CNAK(&dev->ep[tmp], dev->ep[tmp].num); + } + } + /* ... and ep0out */ + if (cnak_pending & (1 << UDC_EP0OUT_IX)) { + DBG(dev, "CNAK pending for ep%d\n", UDC_EP0OUT_IX); + /* clear NAK by writing CNAK */ + reg = readl(&dev->ep[UDC_EP0OUT_IX].regs->ctl); + reg |= AMD_BIT(UDC_EPCTL_CNAK); + writel(reg, &dev->ep[UDC_EP0OUT_IX].regs->ctl); + dev->ep[UDC_EP0OUT_IX].naking = 0; + UDC_QUEUE_CNAK(&dev->ep[UDC_EP0OUT_IX], + dev->ep[UDC_EP0OUT_IX].num); + } +} + +/* Enabling RX DMA after setup packet */ +static void udc_ep0_set_rde(struct udc *dev) +{ + if (use_dma) { + /* + * only enable RXDMA when no data endpoint enabled + * or data is queued + */ + if (!dev->data_ep_enabled || dev->data_ep_queued) { + udc_set_rde(dev); + } else { + /* + * setup timer for enabling RDE (to not enable + * RXFIFO DMA for data endpoints to early) + */ + if (set_rde != 0 && !timer_pending(&udc_timer)) { + udc_timer.expires = + jiffies + HZ/UDC_RDE_TIMER_DIV; + set_rde = 1; + if (!stop_timer) + add_timer(&udc_timer); + } + } + } +} + + +/* Interrupt handler for data OUT traffic */ +static irqreturn_t udc_data_out_isr(struct udc *dev, int ep_ix) +{ + irqreturn_t ret_val = IRQ_NONE; + u32 tmp; + struct udc_ep *ep; + struct udc_request *req; + unsigned int count; + struct udc_data_dma *td = NULL; + unsigned dma_done; + + VDBG(dev, "ep%d irq\n", ep_ix); + ep = &dev->ep[ep_ix]; + + tmp = readl(&ep->regs->sts); + if (use_dma) { + /* BNA event ? */ + if (tmp & AMD_BIT(UDC_EPSTS_BNA)) { + DBG(dev, "BNA ep%dout occurred - DESPTR = %x\n", + ep->num, readl(&ep->regs->desptr)); + /* clear BNA */ + writel(tmp | AMD_BIT(UDC_EPSTS_BNA), &ep->regs->sts); + if (!ep->cancel_transfer) + ep->bna_occurred = 1; + else + ep->cancel_transfer = 0; + ret_val = IRQ_HANDLED; + goto finished; + } + } + /* HE event ? */ + if (tmp & AMD_BIT(UDC_EPSTS_HE)) { + dev_err(dev->dev, "HE ep%dout occurred\n", ep->num); + + /* clear HE */ + writel(tmp | AMD_BIT(UDC_EPSTS_HE), &ep->regs->sts); + ret_val = IRQ_HANDLED; + goto finished; + } + + if (!list_empty(&ep->queue)) { + + /* next request */ + req = list_entry(ep->queue.next, + struct udc_request, queue); + } else { + req = NULL; + udc_rxfifo_pending = 1; + } + VDBG(dev, "req = %p\n", req); + /* fifo mode */ + if (!use_dma) { + + /* read fifo */ + if (req && udc_rxfifo_read(ep, req)) { + ret_val = IRQ_HANDLED; + + /* finish */ + complete_req(ep, req, 0); + /* next request */ + if (!list_empty(&ep->queue) && !ep->halted) { + req = list_entry(ep->queue.next, + struct udc_request, queue); + } else + req = NULL; + } + + /* DMA */ + } else if (!ep->cancel_transfer && req) { + ret_val = IRQ_HANDLED; + + /* check for DMA done */ + if (!use_dma_ppb) { + dma_done = AMD_GETBITS(req->td_data->status, + UDC_DMA_OUT_STS_BS); + /* packet per buffer mode - rx bytes */ + } else { + /* + * if BNA occurred then recover desc. from + * BNA dummy desc. + */ + if (ep->bna_occurred) { + VDBG(dev, "Recover desc. from BNA dummy\n"); + memcpy(req->td_data, ep->bna_dummy_req->td_data, + sizeof(struct udc_data_dma)); + ep->bna_occurred = 0; + udc_init_bna_dummy(ep->req); + } + td = udc_get_last_dma_desc(req); + dma_done = AMD_GETBITS(td->status, UDC_DMA_OUT_STS_BS); + } + if (dma_done == UDC_DMA_OUT_STS_BS_DMA_DONE) { + /* buffer fill mode - rx bytes */ + if (!use_dma_ppb) { + /* received number bytes */ + count = AMD_GETBITS(req->td_data->status, + UDC_DMA_OUT_STS_RXBYTES); + VDBG(dev, "rx bytes=%u\n", count); + /* packet per buffer mode - rx bytes */ + } else { + VDBG(dev, "req->td_data=%p\n", req->td_data); + VDBG(dev, "last desc = %p\n", td); + /* received number bytes */ + if (use_dma_ppb_du) { + /* every desc. counts bytes */ + count = udc_get_ppbdu_rxbytes(req); + } else { + /* last desc. counts bytes */ + count = AMD_GETBITS(td->status, + UDC_DMA_OUT_STS_RXBYTES); + if (!count && req->req.length + == UDC_DMA_MAXPACKET) { + /* + * on 64k packets the RXBYTES + * field is zero + */ + count = UDC_DMA_MAXPACKET; + } + } + VDBG(dev, "last desc rx bytes=%u\n", count); + } + + tmp = req->req.length - req->req.actual; + if (count > tmp) { + if ((tmp % ep->ep.maxpacket) != 0) { + DBG(dev, "%s: rx %db, space=%db\n", + ep->ep.name, count, tmp); + req->req.status = -EOVERFLOW; + } + count = tmp; + } + req->req.actual += count; + req->dma_going = 0; + /* complete request */ + complete_req(ep, req, 0); + + /* next request */ + if (!list_empty(&ep->queue) && !ep->halted) { + req = list_entry(ep->queue.next, + struct udc_request, + queue); + /* + * DMA may be already started by udc_queue() + * called by gadget drivers completion + * routine. This happens when queue + * holds one request only. + */ + if (req->dma_going == 0) { + /* next dma */ + if (prep_dma(ep, req, GFP_ATOMIC) != 0) + goto finished; + /* write desc pointer */ + writel(req->td_phys, + &ep->regs->desptr); + req->dma_going = 1; + /* enable DMA */ + udc_set_rde(dev); + } + } else { + /* + * implant BNA dummy descriptor to allow + * RXFIFO opening by RDE + */ + if (ep->bna_dummy_req) { + /* write desc pointer */ + writel(ep->bna_dummy_req->td_phys, + &ep->regs->desptr); + ep->bna_occurred = 0; + } + + /* + * schedule timer for setting RDE if queue + * remains empty to allow ep0 packets pass + * through + */ + if (set_rde != 0 + && !timer_pending(&udc_timer)) { + udc_timer.expires = + jiffies + + HZ*UDC_RDE_TIMER_SECONDS; + set_rde = 1; + if (!stop_timer) + add_timer(&udc_timer); + } + if (ep->num != UDC_EP0OUT_IX) + dev->data_ep_queued = 0; + } + + } else { + /* + * RX DMA must be reenabled for each desc in PPBDU mode + * and must be enabled for PPBNDU mode in case of BNA + */ + udc_set_rde(dev); + } + + } else if (ep->cancel_transfer) { + ret_val = IRQ_HANDLED; + ep->cancel_transfer = 0; + } + + /* check pending CNAKS */ + if (cnak_pending) { + /* CNAk processing when rxfifo empty only */ + if (readl(&dev->regs->sts) & AMD_BIT(UDC_DEVSTS_RXFIFO_EMPTY)) + udc_process_cnak_queue(dev); + } + + /* clear OUT bits in ep status */ + writel(UDC_EPSTS_OUT_CLEAR, &ep->regs->sts); +finished: + return ret_val; +} + +/* Interrupt handler for data IN traffic */ +static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix) +{ + irqreturn_t ret_val = IRQ_NONE; + u32 tmp; + u32 epsts; + struct udc_ep *ep; + struct udc_request *req; + struct udc_data_dma *td; + unsigned len; + + ep = &dev->ep[ep_ix]; + + epsts = readl(&ep->regs->sts); + if (use_dma) { + /* BNA ? */ + if (epsts & AMD_BIT(UDC_EPSTS_BNA)) { + dev_err(dev->dev, + "BNA ep%din occurred - DESPTR = %08lx\n", + ep->num, + (unsigned long) readl(&ep->regs->desptr)); + + /* clear BNA */ + writel(epsts, &ep->regs->sts); + ret_val = IRQ_HANDLED; + goto finished; + } + } + /* HE event ? */ + if (epsts & AMD_BIT(UDC_EPSTS_HE)) { + dev_err(dev->dev, + "HE ep%dn occurred - DESPTR = %08lx\n", + ep->num, (unsigned long) readl(&ep->regs->desptr)); + + /* clear HE */ + writel(epsts | AMD_BIT(UDC_EPSTS_HE), &ep->regs->sts); + ret_val = IRQ_HANDLED; + goto finished; + } + + /* DMA completion */ + if (epsts & AMD_BIT(UDC_EPSTS_TDC)) { + VDBG(dev, "TDC set- completion\n"); + ret_val = IRQ_HANDLED; + if (!ep->cancel_transfer && !list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, + struct udc_request, queue); + /* + * length bytes transferred + * check dma done of last desc. in PPBDU mode + */ + if (use_dma_ppb_du) { + td = udc_get_last_dma_desc(req); + if (td) + req->req.actual = req->req.length; + } else { + /* assume all bytes transferred */ + req->req.actual = req->req.length; + } + + if (req->req.actual == req->req.length) { + /* complete req */ + complete_req(ep, req, 0); + req->dma_going = 0; + /* further request available ? */ + if (list_empty(&ep->queue)) { + /* disable interrupt */ + tmp = readl(&dev->regs->ep_irqmsk); + tmp |= AMD_BIT(ep->num); + writel(tmp, &dev->regs->ep_irqmsk); + } + } + } + ep->cancel_transfer = 0; + + } + /* + * status reg has IN bit set and TDC not set (if TDC was handled, + * IN must not be handled (UDC defect) ? + */ + if ((epsts & AMD_BIT(UDC_EPSTS_IN)) + && !(epsts & AMD_BIT(UDC_EPSTS_TDC))) { + ret_val = IRQ_HANDLED; + if (!list_empty(&ep->queue)) { + /* next request */ + req = list_entry(ep->queue.next, + struct udc_request, queue); + /* FIFO mode */ + if (!use_dma) { + /* write fifo */ + udc_txfifo_write(ep, &req->req); + len = req->req.length - req->req.actual; + if (len > ep->ep.maxpacket) + len = ep->ep.maxpacket; + req->req.actual += len; + if (req->req.actual == req->req.length + || (len != ep->ep.maxpacket)) { + /* complete req */ + complete_req(ep, req, 0); + } + /* DMA */ + } else if (req && !req->dma_going) { + VDBG(dev, "IN DMA : req=%p req->td_data=%p\n", + req, req->td_data); + if (req->td_data) { + + req->dma_going = 1; + + /* + * unset L bit of first desc. + * for chain + */ + if (use_dma_ppb && req->req.length > + ep->ep.maxpacket) { + req->td_data->status &= + AMD_CLEAR_BIT( + UDC_DMA_IN_STS_L); + } + + /* write desc pointer */ + writel(req->td_phys, &ep->regs->desptr); + + /* set HOST READY */ + req->td_data->status = + AMD_ADDBITS( + req->td_data->status, + UDC_DMA_IN_STS_BS_HOST_READY, + UDC_DMA_IN_STS_BS); + + /* set poll demand bit */ + tmp = readl(&ep->regs->ctl); + tmp |= AMD_BIT(UDC_EPCTL_P); + writel(tmp, &ep->regs->ctl); + } + } + + } else if (!use_dma && ep->in) { + /* disable interrupt */ + tmp = readl( + &dev->regs->ep_irqmsk); + tmp |= AMD_BIT(ep->num); + writel(tmp, + &dev->regs->ep_irqmsk); + } + } + /* clear status bits */ + writel(epsts, &ep->regs->sts); + +finished: + return ret_val; + +} + +/* Interrupt handler for Control OUT traffic */ +static irqreturn_t udc_control_out_isr(struct udc *dev) +__releases(dev->lock) +__acquires(dev->lock) +{ + irqreturn_t ret_val = IRQ_NONE; + u32 tmp; + int setup_supported; + u32 count; + int set = 0; + struct udc_ep *ep; + struct udc_ep *ep_tmp; + + ep = &dev->ep[UDC_EP0OUT_IX]; + + /* clear irq */ + writel(AMD_BIT(UDC_EPINT_OUT_EP0), &dev->regs->ep_irqsts); + + tmp = readl(&dev->ep[UDC_EP0OUT_IX].regs->sts); + /* check BNA and clear if set */ + if (tmp & AMD_BIT(UDC_EPSTS_BNA)) { + VDBG(dev, "ep0: BNA set\n"); + writel(AMD_BIT(UDC_EPSTS_BNA), + &dev->ep[UDC_EP0OUT_IX].regs->sts); + ep->bna_occurred = 1; + ret_val = IRQ_HANDLED; + goto finished; + } + + /* type of data: SETUP or DATA 0 bytes */ + tmp = AMD_GETBITS(tmp, UDC_EPSTS_OUT); + VDBG(dev, "data_typ = %x\n", tmp); + + /* setup data */ + if (tmp == UDC_EPSTS_OUT_SETUP) { + ret_val = IRQ_HANDLED; + + ep->dev->stall_ep0in = 0; + dev->waiting_zlp_ack_ep0in = 0; + + /* set NAK for EP0_IN */ + tmp = readl(&dev->ep[UDC_EP0IN_IX].regs->ctl); + tmp |= AMD_BIT(UDC_EPCTL_SNAK); + writel(tmp, &dev->ep[UDC_EP0IN_IX].regs->ctl); + dev->ep[UDC_EP0IN_IX].naking = 1; + /* get setup data */ + if (use_dma) { + + /* clear OUT bits in ep status */ + writel(UDC_EPSTS_OUT_CLEAR, + &dev->ep[UDC_EP0OUT_IX].regs->sts); + + setup_data.data[0] = + dev->ep[UDC_EP0OUT_IX].td_stp->data12; + setup_data.data[1] = + dev->ep[UDC_EP0OUT_IX].td_stp->data34; + /* set HOST READY */ + dev->ep[UDC_EP0OUT_IX].td_stp->status = + UDC_DMA_STP_STS_BS_HOST_READY; + } else { + /* read fifo */ + udc_rxfifo_read_dwords(dev, setup_data.data, 2); + } + + /* determine direction of control data */ + if ((setup_data.request.bRequestType & USB_DIR_IN) != 0) { + dev->gadget.ep0 = &dev->ep[UDC_EP0IN_IX].ep; + /* enable RDE */ + udc_ep0_set_rde(dev); + set = 0; + } else { + dev->gadget.ep0 = &dev->ep[UDC_EP0OUT_IX].ep; + /* + * implant BNA dummy descriptor to allow RXFIFO opening + * by RDE + */ + if (ep->bna_dummy_req) { + /* write desc pointer */ + writel(ep->bna_dummy_req->td_phys, + &dev->ep[UDC_EP0OUT_IX].regs->desptr); + ep->bna_occurred = 0; + } + + set = 1; + dev->ep[UDC_EP0OUT_IX].naking = 1; + /* + * setup timer for enabling RDE (to not enable + * RXFIFO DMA for data to early) + */ + set_rde = 1; + if (!timer_pending(&udc_timer)) { + udc_timer.expires = jiffies + + HZ/UDC_RDE_TIMER_DIV; + if (!stop_timer) + add_timer(&udc_timer); + } + } + + /* + * mass storage reset must be processed here because + * next packet may be a CLEAR_FEATURE HALT which would not + * clear the stall bit when no STALL handshake was received + * before (autostall can cause this) + */ + if (setup_data.data[0] == UDC_MSCRES_DWORD0 + && setup_data.data[1] == UDC_MSCRES_DWORD1) { + DBG(dev, "MSC Reset\n"); + /* + * clear stall bits + * only one IN and OUT endpoints are handled + */ + ep_tmp = &udc->ep[UDC_EPIN_IX]; + udc_set_halt(&ep_tmp->ep, 0); + ep_tmp = &udc->ep[UDC_EPOUT_IX]; + udc_set_halt(&ep_tmp->ep, 0); + } + + /* call gadget with setup data received */ + spin_unlock(&dev->lock); + setup_supported = dev->driver->setup(&dev->gadget, + &setup_data.request); + spin_lock(&dev->lock); + + tmp = readl(&dev->ep[UDC_EP0IN_IX].regs->ctl); + /* ep0 in returns data (not zlp) on IN phase */ + if (setup_supported >= 0 && setup_supported < + UDC_EP0IN_MAXPACKET) { + /* clear NAK by writing CNAK in EP0_IN */ + tmp |= AMD_BIT(UDC_EPCTL_CNAK); + writel(tmp, &dev->ep[UDC_EP0IN_IX].regs->ctl); + dev->ep[UDC_EP0IN_IX].naking = 0; + UDC_QUEUE_CNAK(&dev->ep[UDC_EP0IN_IX], UDC_EP0IN_IX); + + /* if unsupported request then stall */ + } else if (setup_supported < 0) { + tmp |= AMD_BIT(UDC_EPCTL_S); + writel(tmp, &dev->ep[UDC_EP0IN_IX].regs->ctl); + } else + dev->waiting_zlp_ack_ep0in = 1; + + + /* clear NAK by writing CNAK in EP0_OUT */ + if (!set) { + tmp = readl(&dev->ep[UDC_EP0OUT_IX].regs->ctl); + tmp |= AMD_BIT(UDC_EPCTL_CNAK); + writel(tmp, &dev->ep[UDC_EP0OUT_IX].regs->ctl); + dev->ep[UDC_EP0OUT_IX].naking = 0; + UDC_QUEUE_CNAK(&dev->ep[UDC_EP0OUT_IX], UDC_EP0OUT_IX); + } + + if (!use_dma) { + /* clear OUT bits in ep status */ + writel(UDC_EPSTS_OUT_CLEAR, + &dev->ep[UDC_EP0OUT_IX].regs->sts); + } + + /* data packet 0 bytes */ + } else if (tmp == UDC_EPSTS_OUT_DATA) { + /* clear OUT bits in ep status */ + writel(UDC_EPSTS_OUT_CLEAR, &dev->ep[UDC_EP0OUT_IX].regs->sts); + + /* get setup data: only 0 packet */ + if (use_dma) { + /* no req if 0 packet, just reactivate */ + if (list_empty(&dev->ep[UDC_EP0OUT_IX].queue)) { + VDBG(dev, "ZLP\n"); + + /* set HOST READY */ + dev->ep[UDC_EP0OUT_IX].td->status = + AMD_ADDBITS( + dev->ep[UDC_EP0OUT_IX].td->status, + UDC_DMA_OUT_STS_BS_HOST_READY, + UDC_DMA_OUT_STS_BS); + /* enable RDE */ + udc_ep0_set_rde(dev); + ret_val = IRQ_HANDLED; + + } else { + /* control write */ + ret_val |= udc_data_out_isr(dev, UDC_EP0OUT_IX); + /* re-program desc. pointer for possible ZLPs */ + writel(dev->ep[UDC_EP0OUT_IX].td_phys, + &dev->ep[UDC_EP0OUT_IX].regs->desptr); + /* enable RDE */ + udc_ep0_set_rde(dev); + } + } else { + + /* received number bytes */ + count = readl(&dev->ep[UDC_EP0OUT_IX].regs->sts); + count = AMD_GETBITS(count, UDC_EPSTS_RX_PKT_SIZE); + /* out data for fifo mode not working */ + count = 0; + + /* 0 packet or real data ? */ + if (count != 0) { + ret_val |= udc_data_out_isr(dev, UDC_EP0OUT_IX); + } else { + /* dummy read confirm */ + readl(&dev->ep[UDC_EP0OUT_IX].regs->confirm); + ret_val = IRQ_HANDLED; + } + } + } + + /* check pending CNAKS */ + if (cnak_pending) { + /* CNAk processing when rxfifo empty only */ + if (readl(&dev->regs->sts) & AMD_BIT(UDC_DEVSTS_RXFIFO_EMPTY)) + udc_process_cnak_queue(dev); + } + +finished: + return ret_val; +} + +/* Interrupt handler for Control IN traffic */ +static irqreturn_t udc_control_in_isr(struct udc *dev) +{ + irqreturn_t ret_val = IRQ_NONE; + u32 tmp; + struct udc_ep *ep; + struct udc_request *req; + unsigned len; + + ep = &dev->ep[UDC_EP0IN_IX]; + + /* clear irq */ + writel(AMD_BIT(UDC_EPINT_IN_EP0), &dev->regs->ep_irqsts); + + tmp = readl(&dev->ep[UDC_EP0IN_IX].regs->sts); + /* DMA completion */ + if (tmp & AMD_BIT(UDC_EPSTS_TDC)) { + VDBG(dev, "isr: TDC clear\n"); + ret_val = IRQ_HANDLED; + + /* clear TDC bit */ + writel(AMD_BIT(UDC_EPSTS_TDC), + &dev->ep[UDC_EP0IN_IX].regs->sts); + + /* status reg has IN bit set ? */ + } else if (tmp & AMD_BIT(UDC_EPSTS_IN)) { + ret_val = IRQ_HANDLED; + + if (ep->dma) { + /* clear IN bit */ + writel(AMD_BIT(UDC_EPSTS_IN), + &dev->ep[UDC_EP0IN_IX].regs->sts); + } + if (dev->stall_ep0in) { + DBG(dev, "stall ep0in\n"); + /* halt ep0in */ + tmp = readl(&ep->regs->ctl); + tmp |= AMD_BIT(UDC_EPCTL_S); + writel(tmp, &ep->regs->ctl); + } else { + if (!list_empty(&ep->queue)) { + /* next request */ + req = list_entry(ep->queue.next, + struct udc_request, queue); + + if (ep->dma) { + /* write desc pointer */ + writel(req->td_phys, &ep->regs->desptr); + /* set HOST READY */ + req->td_data->status = + AMD_ADDBITS( + req->td_data->status, + UDC_DMA_STP_STS_BS_HOST_READY, + UDC_DMA_STP_STS_BS); + + /* set poll demand bit */ + tmp = + readl(&dev->ep[UDC_EP0IN_IX].regs->ctl); + tmp |= AMD_BIT(UDC_EPCTL_P); + writel(tmp, + &dev->ep[UDC_EP0IN_IX].regs->ctl); + + /* all bytes will be transferred */ + req->req.actual = req->req.length; + + /* complete req */ + complete_req(ep, req, 0); + + } else { + /* write fifo */ + udc_txfifo_write(ep, &req->req); + + /* lengh bytes transferred */ + len = req->req.length - req->req.actual; + if (len > ep->ep.maxpacket) + len = ep->ep.maxpacket; + + req->req.actual += len; + if (req->req.actual == req->req.length + || (len != ep->ep.maxpacket)) { + /* complete req */ + complete_req(ep, req, 0); + } + } + + } + } + ep->halted = 0; + dev->stall_ep0in = 0; + if (!ep->dma) { + /* clear IN bit */ + writel(AMD_BIT(UDC_EPSTS_IN), + &dev->ep[UDC_EP0IN_IX].regs->sts); + } + } + + return ret_val; +} + + +/* Interrupt handler for global device events */ +static irqreturn_t udc_dev_isr(struct udc *dev, u32 dev_irq) +__releases(dev->lock) +__acquires(dev->lock) +{ + irqreturn_t ret_val = IRQ_NONE; + u32 tmp; + u32 cfg; + struct udc_ep *ep; + u16 i; + u8 udc_csr_epix; + + /* SET_CONFIG irq ? */ + if (dev_irq & AMD_BIT(UDC_DEVINT_SC)) { + ret_val = IRQ_HANDLED; + + /* read config value */ + tmp = readl(&dev->regs->sts); + cfg = AMD_GETBITS(tmp, UDC_DEVSTS_CFG); + DBG(dev, "SET_CONFIG interrupt: config=%d\n", cfg); + dev->cur_config = cfg; + dev->set_cfg_not_acked = 1; + + /* make usb request for gadget driver */ + memset(&setup_data, 0 , sizeof(union udc_setup_data)); + setup_data.request.bRequest = USB_REQ_SET_CONFIGURATION; + setup_data.request.wValue = cpu_to_le16(dev->cur_config); + + /* programm the NE registers */ + for (i = 0; i < UDC_EP_NUM; i++) { + ep = &dev->ep[i]; + if (ep->in) { + + /* ep ix in UDC CSR register space */ + udc_csr_epix = ep->num; + + + /* OUT ep */ + } else { + /* ep ix in UDC CSR register space */ + udc_csr_epix = ep->num - UDC_CSR_EP_OUT_IX_OFS; + } + + tmp = readl(&dev->csr->ne[udc_csr_epix]); + /* ep cfg */ + tmp = AMD_ADDBITS(tmp, ep->dev->cur_config, + UDC_CSR_NE_CFG); + /* write reg */ + writel(tmp, &dev->csr->ne[udc_csr_epix]); + + /* clear stall bits */ + ep->halted = 0; + tmp = readl(&ep->regs->ctl); + tmp = tmp & AMD_CLEAR_BIT(UDC_EPCTL_S); + writel(tmp, &ep->regs->ctl); + } + /* call gadget zero with setup data received */ + spin_unlock(&dev->lock); + tmp = dev->driver->setup(&dev->gadget, &setup_data.request); + spin_lock(&dev->lock); + + } /* SET_INTERFACE ? */ + if (dev_irq & AMD_BIT(UDC_DEVINT_SI)) { + ret_val = IRQ_HANDLED; + + dev->set_cfg_not_acked = 1; + /* read interface and alt setting values */ + tmp = readl(&dev->regs->sts); + dev->cur_alt = AMD_GETBITS(tmp, UDC_DEVSTS_ALT); + dev->cur_intf = AMD_GETBITS(tmp, UDC_DEVSTS_INTF); + + /* make usb request for gadget driver */ + memset(&setup_data, 0 , sizeof(union udc_setup_data)); + setup_data.request.bRequest = USB_REQ_SET_INTERFACE; + setup_data.request.bRequestType = USB_RECIP_INTERFACE; + setup_data.request.wValue = cpu_to_le16(dev->cur_alt); + setup_data.request.wIndex = cpu_to_le16(dev->cur_intf); + + DBG(dev, "SET_INTERFACE interrupt: alt=%d intf=%d\n", + dev->cur_alt, dev->cur_intf); + + /* programm the NE registers */ + for (i = 0; i < UDC_EP_NUM; i++) { + ep = &dev->ep[i]; + if (ep->in) { + + /* ep ix in UDC CSR register space */ + udc_csr_epix = ep->num; + + + /* OUT ep */ + } else { + /* ep ix in UDC CSR register space */ + udc_csr_epix = ep->num - UDC_CSR_EP_OUT_IX_OFS; + } + + /* UDC CSR reg */ + /* set ep values */ + tmp = readl(&dev->csr->ne[udc_csr_epix]); + /* ep interface */ + tmp = AMD_ADDBITS(tmp, ep->dev->cur_intf, + UDC_CSR_NE_INTF); + /* tmp = AMD_ADDBITS(tmp, 2, UDC_CSR_NE_INTF); */ + /* ep alt */ + tmp = AMD_ADDBITS(tmp, ep->dev->cur_alt, + UDC_CSR_NE_ALT); + /* write reg */ + writel(tmp, &dev->csr->ne[udc_csr_epix]); + + /* clear stall bits */ + ep->halted = 0; + tmp = readl(&ep->regs->ctl); + tmp = tmp & AMD_CLEAR_BIT(UDC_EPCTL_S); + writel(tmp, &ep->regs->ctl); + } + + /* call gadget zero with setup data received */ + spin_unlock(&dev->lock); + tmp = dev->driver->setup(&dev->gadget, &setup_data.request); + spin_lock(&dev->lock); + + } /* USB reset */ + if (dev_irq & AMD_BIT(UDC_DEVINT_UR)) { + DBG(dev, "USB Reset interrupt\n"); + ret_val = IRQ_HANDLED; + + /* allow soft reset when suspend occurs */ + soft_reset_occured = 0; + + dev->waiting_zlp_ack_ep0in = 0; + dev->set_cfg_not_acked = 0; + + /* mask not needed interrupts */ + udc_mask_unused_interrupts(dev); + + /* call gadget to resume and reset configs etc. */ + spin_unlock(&dev->lock); + if (dev->sys_suspended && dev->driver->resume) { + dev->driver->resume(&dev->gadget); + dev->sys_suspended = 0; + } + usb_gadget_udc_reset(&dev->gadget, dev->driver); + spin_lock(&dev->lock); + + /* disable ep0 to empty req queue */ + empty_req_queue(&dev->ep[UDC_EP0IN_IX]); + ep_init(dev->regs, &dev->ep[UDC_EP0IN_IX]); + + /* soft reset when rxfifo not empty */ + tmp = readl(&dev->regs->sts); + if (!(tmp & AMD_BIT(UDC_DEVSTS_RXFIFO_EMPTY)) + && !soft_reset_after_usbreset_occured) { + udc_soft_reset(dev); + soft_reset_after_usbreset_occured++; + } + + /* + * DMA reset to kill potential old DMA hw hang, + * POLL bit is already reset by ep_init() through + * disconnect() + */ + DBG(dev, "DMA machine reset\n"); + tmp = readl(&dev->regs->cfg); + writel(tmp | AMD_BIT(UDC_DEVCFG_DMARST), &dev->regs->cfg); + writel(tmp, &dev->regs->cfg); + + /* put into initial config */ + udc_basic_init(dev); + + /* enable device setup interrupts */ + udc_enable_dev_setup_interrupts(dev); + + /* enable suspend interrupt */ + tmp = readl(&dev->regs->irqmsk); + tmp &= AMD_UNMASK_BIT(UDC_DEVINT_US); + writel(tmp, &dev->regs->irqmsk); + + } /* USB suspend */ + if (dev_irq & AMD_BIT(UDC_DEVINT_US)) { + DBG(dev, "USB Suspend interrupt\n"); + ret_val = IRQ_HANDLED; + if (dev->driver->suspend) { + spin_unlock(&dev->lock); + dev->sys_suspended = 1; + dev->driver->suspend(&dev->gadget); + spin_lock(&dev->lock); + } + } /* new speed ? */ + if (dev_irq & AMD_BIT(UDC_DEVINT_ENUM)) { + DBG(dev, "ENUM interrupt\n"); + ret_val = IRQ_HANDLED; + soft_reset_after_usbreset_occured = 0; + + /* disable ep0 to empty req queue */ + empty_req_queue(&dev->ep[UDC_EP0IN_IX]); + ep_init(dev->regs, &dev->ep[UDC_EP0IN_IX]); + + /* link up all endpoints */ + udc_setup_endpoints(dev); + dev_info(dev->dev, "Connect: %s\n", + usb_speed_string(dev->gadget.speed)); + + /* init ep 0 */ + activate_control_endpoints(dev); + + /* enable ep0 interrupts */ + udc_enable_ep0_interrupts(dev); + } + /* session valid change interrupt */ + if (dev_irq & AMD_BIT(UDC_DEVINT_SVC)) { + DBG(dev, "USB SVC interrupt\n"); + ret_val = IRQ_HANDLED; + + /* check that session is not valid to detect disconnect */ + tmp = readl(&dev->regs->sts); + if (!(tmp & AMD_BIT(UDC_DEVSTS_SESSVLD))) { + /* disable suspend interrupt */ + tmp = readl(&dev->regs->irqmsk); + tmp |= AMD_BIT(UDC_DEVINT_US); + writel(tmp, &dev->regs->irqmsk); + DBG(dev, "USB Disconnect (session valid low)\n"); + /* cleanup on disconnect */ + usb_disconnect(udc); + } + + } + + return ret_val; +} + +/* Interrupt Service Routine, see Linux Kernel Doc for parameters */ +irqreturn_t udc_irq(int irq, void *pdev) +{ + struct udc *dev = pdev; + u32 reg; + u16 i; + u32 ep_irq; + irqreturn_t ret_val = IRQ_NONE; + + spin_lock(&dev->lock); + + /* check for ep irq */ + reg = readl(&dev->regs->ep_irqsts); + if (reg) { + if (reg & AMD_BIT(UDC_EPINT_OUT_EP0)) + ret_val |= udc_control_out_isr(dev); + if (reg & AMD_BIT(UDC_EPINT_IN_EP0)) + ret_val |= udc_control_in_isr(dev); + + /* + * data endpoint + * iterate ep's + */ + for (i = 1; i < UDC_EP_NUM; i++) { + ep_irq = 1 << i; + if (!(reg & ep_irq) || i == UDC_EPINT_OUT_EP0) + continue; + + /* clear irq status */ + writel(ep_irq, &dev->regs->ep_irqsts); + + /* irq for out ep ? */ + if (i > UDC_EPIN_NUM) + ret_val |= udc_data_out_isr(dev, i); + else + ret_val |= udc_data_in_isr(dev, i); + } + + } + + + /* check for dev irq */ + reg = readl(&dev->regs->irqsts); + if (reg) { + /* clear irq */ + writel(reg, &dev->regs->irqsts); + ret_val |= udc_dev_isr(dev, reg); + } + + + spin_unlock(&dev->lock); + return ret_val; +} +EXPORT_SYMBOL_GPL(udc_irq); + +/* Tears down device */ +void gadget_release(struct device *pdev) +{ + struct amd5536udc *dev = dev_get_drvdata(pdev); + kfree(dev); +} +EXPORT_SYMBOL_GPL(gadget_release); + +/* Cleanup on device remove */ +void udc_remove(struct udc *dev) +{ + /* remove timer */ + stop_timer++; + if (timer_pending(&udc_timer)) + wait_for_completion(&on_exit); + del_timer_sync(&udc_timer); + /* remove pollstall timer */ + stop_pollstall_timer++; + if (timer_pending(&udc_pollstall_timer)) + wait_for_completion(&on_pollstall_exit); + del_timer_sync(&udc_pollstall_timer); + udc = NULL; +} +EXPORT_SYMBOL_GPL(udc_remove); + +/* free all the dma pools */ +void free_dma_pools(struct udc *dev) +{ + dma_pool_free(dev->stp_requests, dev->ep[UDC_EP0OUT_IX].td, + dev->ep[UDC_EP0OUT_IX].td_phys); + dma_pool_free(dev->stp_requests, dev->ep[UDC_EP0OUT_IX].td_stp, + dev->ep[UDC_EP0OUT_IX].td_stp_dma); + dma_pool_destroy(dev->stp_requests); + dma_pool_destroy(dev->data_requests); +} +EXPORT_SYMBOL_GPL(free_dma_pools); + +/* create dma pools on init */ +int init_dma_pools(struct udc *dev) +{ + struct udc_stp_dma *td_stp; + struct udc_data_dma *td_data; + int retval; + + /* consistent DMA mode setting ? */ + if (use_dma_ppb) { + use_dma_bufferfill_mode = 0; + } else { + use_dma_ppb_du = 0; + use_dma_bufferfill_mode = 1; + } + + /* DMA setup */ + dev->data_requests = dma_pool_create("data_requests", dev->dev, + sizeof(struct udc_data_dma), 0, 0); + if (!dev->data_requests) { + DBG(dev, "can't get request data pool\n"); + return -ENOMEM; + } + + /* EP0 in dma regs = dev control regs */ + dev->ep[UDC_EP0IN_IX].dma = &dev->regs->ctl; + + /* dma desc for setup data */ + dev->stp_requests = dma_pool_create("setup requests", dev->dev, + sizeof(struct udc_stp_dma), 0, 0); + if (!dev->stp_requests) { + DBG(dev, "can't get stp request pool\n"); + retval = -ENOMEM; + goto err_create_dma_pool; + } + /* setup */ + td_stp = dma_pool_alloc(dev->stp_requests, GFP_KERNEL, + &dev->ep[UDC_EP0OUT_IX].td_stp_dma); + if (!td_stp) { + retval = -ENOMEM; + goto err_alloc_dma; + } + dev->ep[UDC_EP0OUT_IX].td_stp = td_stp; + + /* data: 0 packets !? */ + td_data = dma_pool_alloc(dev->stp_requests, GFP_KERNEL, + &dev->ep[UDC_EP0OUT_IX].td_phys); + if (!td_data) { + retval = -ENOMEM; + goto err_alloc_phys; + } + dev->ep[UDC_EP0OUT_IX].td = td_data; + return 0; + +err_alloc_phys: + dma_pool_free(dev->stp_requests, dev->ep[UDC_EP0OUT_IX].td_stp, + dev->ep[UDC_EP0OUT_IX].td_stp_dma); +err_alloc_dma: + dma_pool_destroy(dev->stp_requests); + dev->stp_requests = NULL; +err_create_dma_pool: + dma_pool_destroy(dev->data_requests); + dev->data_requests = NULL; + return retval; +} +EXPORT_SYMBOL_GPL(init_dma_pools); + +/* general probe */ +int udc_probe(struct udc *dev) +{ + char tmp[128]; + u32 reg; + int retval; + + /* device struct setup */ + dev->gadget.ops = &udc_ops; + + dev_set_name(&dev->gadget.dev, "gadget"); + dev->gadget.name = name; + dev->gadget.max_speed = USB_SPEED_HIGH; + + /* init registers, interrupts, ... */ + startup_registers(dev); + + dev_info(dev->dev, "%s\n", mod_desc); + + snprintf(tmp, sizeof(tmp), "%d", dev->irq); + + /* Print this device info for AMD chips only*/ + if (dev->chiprev == UDC_HSA0_REV || + dev->chiprev == UDC_HSB1_REV) { + dev_info(dev->dev, "irq %s, pci mem %08lx, chip rev %02x(Geode5536 %s)\n", + tmp, dev->phys_addr, dev->chiprev, + (dev->chiprev == UDC_HSA0_REV) ? + "A0" : "B1"); + strcpy(tmp, UDC_DRIVER_VERSION_STRING); + if (dev->chiprev == UDC_HSA0_REV) { + dev_err(dev->dev, "chip revision is A0; too old\n"); + retval = -ENODEV; + goto finished; + } + dev_info(dev->dev, + "driver version: %s(for Geode5536 B1)\n", tmp); + } + + udc = dev; + + retval = usb_add_gadget_udc_release(udc->dev, &dev->gadget, + gadget_release); + if (retval) + goto finished; + + /* timer init */ + timer_setup(&udc_timer, udc_timer_function, 0); + timer_setup(&udc_pollstall_timer, udc_pollstall_timer_function, 0); + + /* set SD */ + reg = readl(&dev->regs->ctl); + reg |= AMD_BIT(UDC_DEVCTL_SD); + writel(reg, &dev->regs->ctl); + + /* print dev register info */ + print_regs(dev); + + return 0; + +finished: + return retval; +} +EXPORT_SYMBOL_GPL(udc_probe); + +MODULE_DESCRIPTION(UDC_MOD_DESCRIPTION); +MODULE_AUTHOR("Thomas Dahlmann"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/udc/snps_udc_plat.c b/drivers/usb/gadget/udc/snps_udc_plat.c new file mode 100644 index 000000000..8bbb89c80 --- /dev/null +++ b/drivers/usb/gadget/udc/snps_udc_plat.c @@ -0,0 +1,331 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * snps_udc_plat.c - Synopsys UDC Platform Driver + * + * Copyright (C) 2016 Broadcom + */ + +#include <linux/extcon.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_gpio.h> +#include <linux/platform_device.h> +#include <linux/phy/phy.h> +#include <linux/module.h> +#include <linux/dmapool.h> +#include <linux/interrupt.h> +#include <linux/moduleparam.h> +#include "amd5536udc.h" + +/* description */ +#define UDC_MOD_DESCRIPTION "Synopsys UDC platform driver" + +static void start_udc(struct udc *udc) +{ + if (udc->driver) { + dev_info(udc->dev, "Connecting...\n"); + udc_enable_dev_setup_interrupts(udc); + udc_basic_init(udc); + udc->connected = 1; + } +} + +static void stop_udc(struct udc *udc) +{ + int tmp; + u32 reg; + + spin_lock(&udc->lock); + + /* Flush the receieve fifo */ + reg = readl(&udc->regs->ctl); + reg |= AMD_BIT(UDC_DEVCTL_SRX_FLUSH); + writel(reg, &udc->regs->ctl); + + reg = readl(&udc->regs->ctl); + reg &= ~(AMD_BIT(UDC_DEVCTL_SRX_FLUSH)); + writel(reg, &udc->regs->ctl); + dev_dbg(udc->dev, "ep rx queue flushed\n"); + + /* Mask interrupts. Required more so when the + * UDC is connected to a DRD phy. + */ + udc_mask_unused_interrupts(udc); + + /* Disconnect gadget driver */ + if (udc->driver) { + spin_unlock(&udc->lock); + udc->driver->disconnect(&udc->gadget); + spin_lock(&udc->lock); + + /* empty queues */ + for (tmp = 0; tmp < UDC_EP_NUM; tmp++) + empty_req_queue(&udc->ep[tmp]); + } + udc->connected = 0; + + spin_unlock(&udc->lock); + dev_info(udc->dev, "Device disconnected\n"); +} + +static void udc_drd_work(struct work_struct *work) +{ + struct udc *udc; + + udc = container_of(to_delayed_work(work), + struct udc, drd_work); + + if (udc->conn_type) { + dev_dbg(udc->dev, "idle -> device\n"); + start_udc(udc); + } else { + dev_dbg(udc->dev, "device -> idle\n"); + stop_udc(udc); + } +} + +static int usbd_connect_notify(struct notifier_block *self, + unsigned long event, void *ptr) +{ + struct udc *udc = container_of(self, struct udc, nb); + + dev_dbg(udc->dev, "%s: event: %lu\n", __func__, event); + + udc->conn_type = event; + + schedule_delayed_work(&udc->drd_work, 0); + + return NOTIFY_OK; +} + +static int udc_plat_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *res; + struct udc *udc; + int ret; + + udc = devm_kzalloc(dev, sizeof(*udc), GFP_KERNEL); + if (!udc) + return -ENOMEM; + + spin_lock_init(&udc->lock); + udc->dev = dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + udc->virt_addr = devm_ioremap_resource(dev, res); + if (IS_ERR(udc->virt_addr)) + return PTR_ERR(udc->virt_addr); + + /* udc csr registers base */ + udc->csr = udc->virt_addr + UDC_CSR_ADDR; + + /* dev registers base */ + udc->regs = udc->virt_addr + UDC_DEVCFG_ADDR; + + /* ep registers base */ + udc->ep_regs = udc->virt_addr + UDC_EPREGS_ADDR; + + /* fifo's base */ + udc->rxfifo = (u32 __iomem *)(udc->virt_addr + UDC_RXFIFO_ADDR); + udc->txfifo = (u32 __iomem *)(udc->virt_addr + UDC_TXFIFO_ADDR); + + udc->phys_addr = (unsigned long)res->start; + + udc->irq = irq_of_parse_and_map(dev->of_node, 0); + if (udc->irq <= 0) { + dev_err(dev, "Can't parse and map interrupt\n"); + return -EINVAL; + } + + udc->udc_phy = devm_of_phy_get_by_index(dev, dev->of_node, 0); + if (IS_ERR(udc->udc_phy)) { + dev_err(dev, "Failed to obtain phy from device tree\n"); + return PTR_ERR(udc->udc_phy); + } + + ret = phy_init(udc->udc_phy); + if (ret) { + dev_err(dev, "UDC phy init failed"); + return ret; + } + + ret = phy_power_on(udc->udc_phy); + if (ret) { + dev_err(dev, "UDC phy power on failed"); + phy_exit(udc->udc_phy); + return ret; + } + + /* Register for extcon if supported */ + if (of_get_property(dev->of_node, "extcon", NULL)) { + udc->edev = extcon_get_edev_by_phandle(dev, 0); + if (IS_ERR(udc->edev)) { + if (PTR_ERR(udc->edev) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_err(dev, "Invalid or missing extcon\n"); + ret = PTR_ERR(udc->edev); + goto exit_phy; + } + + udc->nb.notifier_call = usbd_connect_notify; + ret = extcon_register_notifier(udc->edev, EXTCON_USB, + &udc->nb); + if (ret < 0) { + dev_err(dev, "Can't register extcon device\n"); + goto exit_phy; + } + + ret = extcon_get_state(udc->edev, EXTCON_USB); + if (ret < 0) { + dev_err(dev, "Can't get cable state\n"); + goto exit_extcon; + } else if (ret) { + udc->conn_type = ret; + } + INIT_DELAYED_WORK(&udc->drd_work, udc_drd_work); + } + + /* init dma pools */ + if (use_dma) { + ret = init_dma_pools(udc); + if (ret != 0) + goto exit_extcon; + } + + ret = devm_request_irq(dev, udc->irq, udc_irq, IRQF_SHARED, + "snps-udc", udc); + if (ret < 0) { + dev_err(dev, "Request irq %d failed for UDC\n", udc->irq); + goto exit_dma; + } + + platform_set_drvdata(pdev, udc); + udc->chiprev = UDC_BCM_REV; + + if (udc_probe(udc)) { + ret = -ENODEV; + goto exit_dma; + } + dev_info(dev, "Synopsys UDC platform driver probe successful\n"); + + return 0; + +exit_dma: + if (use_dma) + free_dma_pools(udc); +exit_extcon: + if (udc->edev) + extcon_unregister_notifier(udc->edev, EXTCON_USB, &udc->nb); +exit_phy: + if (udc->udc_phy) { + phy_power_off(udc->udc_phy); + phy_exit(udc->udc_phy); + } + return ret; +} + +static int udc_plat_remove(struct platform_device *pdev) +{ + struct udc *dev; + + dev = platform_get_drvdata(pdev); + + usb_del_gadget_udc(&dev->gadget); + /* gadget driver must not be registered */ + if (WARN_ON(dev->driver)) + return 0; + + /* dma pool cleanup */ + free_dma_pools(dev); + + udc_remove(dev); + + platform_set_drvdata(pdev, NULL); + + phy_power_off(dev->udc_phy); + phy_exit(dev->udc_phy); + extcon_unregister_notifier(dev->edev, EXTCON_USB, &dev->nb); + + dev_info(&pdev->dev, "Synopsys UDC platform driver removed\n"); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int udc_plat_suspend(struct device *dev) +{ + struct udc *udc; + + udc = dev_get_drvdata(dev); + stop_udc(udc); + + if (extcon_get_state(udc->edev, EXTCON_USB) > 0) { + dev_dbg(udc->dev, "device -> idle\n"); + stop_udc(udc); + } + phy_power_off(udc->udc_phy); + phy_exit(udc->udc_phy); + + return 0; +} + +static int udc_plat_resume(struct device *dev) +{ + struct udc *udc; + int ret; + + udc = dev_get_drvdata(dev); + + ret = phy_init(udc->udc_phy); + if (ret) { + dev_err(udc->dev, "UDC phy init failure"); + return ret; + } + + ret = phy_power_on(udc->udc_phy); + if (ret) { + dev_err(udc->dev, "UDC phy power on failure"); + phy_exit(udc->udc_phy); + return ret; + } + + if (extcon_get_state(udc->edev, EXTCON_USB) > 0) { + dev_dbg(udc->dev, "idle -> device\n"); + start_udc(udc); + } + + return 0; +} +static const struct dev_pm_ops udc_plat_pm_ops = { + .suspend = udc_plat_suspend, + .resume = udc_plat_resume, +}; +#endif + +#if defined(CONFIG_OF) +static const struct of_device_id of_udc_match[] = { + { .compatible = "brcm,ns2-udc", }, + { .compatible = "brcm,cygnus-udc", }, + { .compatible = "brcm,iproc-udc", }, + { } +}; +MODULE_DEVICE_TABLE(of, of_udc_match); +#endif + +static struct platform_driver udc_plat_driver = { + .probe = udc_plat_probe, + .remove = udc_plat_remove, + .driver = { + .name = "snps-udc-plat", + .of_match_table = of_match_ptr(of_udc_match), +#ifdef CONFIG_PM_SLEEP + .pm = &udc_plat_pm_ops, +#endif + }, +}; +module_platform_driver(udc_plat_driver); + +MODULE_DESCRIPTION(UDC_MOD_DESCRIPTION); +MODULE_AUTHOR("Broadcom"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c new file mode 100644 index 000000000..a8cadc45c --- /dev/null +++ b/drivers/usb/gadget/udc/tegra-xudc.c @@ -0,0 +1,4048 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * NVIDIA Tegra XUSB device mode controller + * + * Copyright (c) 2013-2022, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2015, Google Inc. + */ + +#include <linux/clk.h> +#include <linux/completion.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/dmapool.h> +#include <linux/interrupt.h> +#include <linux/iopoll.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/phy/phy.h> +#include <linux/phy/tegra/xusb.h> +#include <linux/pm_domain.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/regulator/consumer.h> +#include <linux/reset.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/otg.h> +#include <linux/usb/role.h> +#include <linux/usb/phy.h> +#include <linux/workqueue.h> + +/* XUSB_DEV registers */ +#define DB 0x004 +#define DB_TARGET_MASK GENMASK(15, 8) +#define DB_TARGET(x) (((x) << 8) & DB_TARGET_MASK) +#define DB_STREAMID_MASK GENMASK(31, 16) +#define DB_STREAMID(x) (((x) << 16) & DB_STREAMID_MASK) +#define ERSTSZ 0x008 +#define ERSTSZ_ERSTXSZ_SHIFT(x) ((x) * 16) +#define ERSTSZ_ERSTXSZ_MASK GENMASK(15, 0) +#define ERSTXBALO(x) (0x010 + 8 * (x)) +#define ERSTXBAHI(x) (0x014 + 8 * (x)) +#define ERDPLO 0x020 +#define ERDPLO_EHB BIT(3) +#define ERDPHI 0x024 +#define EREPLO 0x028 +#define EREPLO_ECS BIT(0) +#define EREPLO_SEGI BIT(1) +#define EREPHI 0x02c +#define CTRL 0x030 +#define CTRL_RUN BIT(0) +#define CTRL_LSE BIT(1) +#define CTRL_IE BIT(4) +#define CTRL_SMI_EVT BIT(5) +#define CTRL_SMI_DSE BIT(6) +#define CTRL_EWE BIT(7) +#define CTRL_DEVADDR_MASK GENMASK(30, 24) +#define CTRL_DEVADDR(x) (((x) << 24) & CTRL_DEVADDR_MASK) +#define CTRL_ENABLE BIT(31) +#define ST 0x034 +#define ST_RC BIT(0) +#define ST_IP BIT(4) +#define RT_IMOD 0x038 +#define RT_IMOD_IMODI_MASK GENMASK(15, 0) +#define RT_IMOD_IMODI(x) ((x) & RT_IMOD_IMODI_MASK) +#define RT_IMOD_IMODC_MASK GENMASK(31, 16) +#define RT_IMOD_IMODC(x) (((x) << 16) & RT_IMOD_IMODC_MASK) +#define PORTSC 0x03c +#define PORTSC_CCS BIT(0) +#define PORTSC_PED BIT(1) +#define PORTSC_PR BIT(4) +#define PORTSC_PLS_SHIFT 5 +#define PORTSC_PLS_MASK GENMASK(8, 5) +#define PORTSC_PLS_U0 0x0 +#define PORTSC_PLS_U2 0x2 +#define PORTSC_PLS_U3 0x3 +#define PORTSC_PLS_DISABLED 0x4 +#define PORTSC_PLS_RXDETECT 0x5 +#define PORTSC_PLS_INACTIVE 0x6 +#define PORTSC_PLS_RESUME 0xf +#define PORTSC_PLS(x) (((x) << PORTSC_PLS_SHIFT) & PORTSC_PLS_MASK) +#define PORTSC_PS_SHIFT 10 +#define PORTSC_PS_MASK GENMASK(13, 10) +#define PORTSC_PS_UNDEFINED 0x0 +#define PORTSC_PS_FS 0x1 +#define PORTSC_PS_LS 0x2 +#define PORTSC_PS_HS 0x3 +#define PORTSC_PS_SS 0x4 +#define PORTSC_LWS BIT(16) +#define PORTSC_CSC BIT(17) +#define PORTSC_WRC BIT(19) +#define PORTSC_PRC BIT(21) +#define PORTSC_PLC BIT(22) +#define PORTSC_CEC BIT(23) +#define PORTSC_WPR BIT(30) +#define PORTSC_CHANGE_MASK (PORTSC_CSC | PORTSC_WRC | PORTSC_PRC | \ + PORTSC_PLC | PORTSC_CEC) +#define ECPLO 0x040 +#define ECPHI 0x044 +#define MFINDEX 0x048 +#define MFINDEX_FRAME_SHIFT 3 +#define MFINDEX_FRAME_MASK GENMASK(13, 3) +#define PORTPM 0x04c +#define PORTPM_L1S_MASK GENMASK(1, 0) +#define PORTPM_L1S_DROP 0x0 +#define PORTPM_L1S_ACCEPT 0x1 +#define PORTPM_L1S_NYET 0x2 +#define PORTPM_L1S_STALL 0x3 +#define PORTPM_L1S(x) ((x) & PORTPM_L1S_MASK) +#define PORTPM_RWE BIT(3) +#define PORTPM_U2TIMEOUT_MASK GENMASK(15, 8) +#define PORTPM_U1TIMEOUT_MASK GENMASK(23, 16) +#define PORTPM_FLA BIT(24) +#define PORTPM_VBA BIT(25) +#define PORTPM_WOC BIT(26) +#define PORTPM_WOD BIT(27) +#define PORTPM_U1E BIT(28) +#define PORTPM_U2E BIT(29) +#define PORTPM_FRWE BIT(30) +#define PORTPM_PNG_CYA BIT(31) +#define EP_HALT 0x050 +#define EP_PAUSE 0x054 +#define EP_RELOAD 0x058 +#define EP_STCHG 0x05c +#define DEVNOTIF_LO 0x064 +#define DEVNOTIF_LO_TRIG BIT(0) +#define DEVNOTIF_LO_TYPE_MASK GENMASK(7, 4) +#define DEVNOTIF_LO_TYPE(x) (((x) << 4) & DEVNOTIF_LO_TYPE_MASK) +#define DEVNOTIF_LO_TYPE_FUNCTION_WAKE 0x1 +#define DEVNOTIF_HI 0x068 +#define PORTHALT 0x06c +#define PORTHALT_HALT_LTSSM BIT(0) +#define PORTHALT_HALT_REJECT BIT(1) +#define PORTHALT_STCHG_REQ BIT(20) +#define PORTHALT_STCHG_INTR_EN BIT(24) +#define PORT_TM 0x070 +#define EP_THREAD_ACTIVE 0x074 +#define EP_STOPPED 0x078 +#define HSFSPI_COUNT0 0x100 +#define HSFSPI_COUNT13 0x134 +#define HSFSPI_COUNT13_U2_RESUME_K_DURATION_MASK GENMASK(29, 0) +#define HSFSPI_COUNT13_U2_RESUME_K_DURATION(x) ((x) & \ + HSFSPI_COUNT13_U2_RESUME_K_DURATION_MASK) +#define BLCG 0x840 +#define SSPX_CORE_CNT0 0x610 +#define SSPX_CORE_CNT0_PING_TBURST_MASK GENMASK(7, 0) +#define SSPX_CORE_CNT0_PING_TBURST(x) ((x) & SSPX_CORE_CNT0_PING_TBURST_MASK) +#define SSPX_CORE_CNT30 0x688 +#define SSPX_CORE_CNT30_LMPITP_TIMER_MASK GENMASK(19, 0) +#define SSPX_CORE_CNT30_LMPITP_TIMER(x) ((x) & \ + SSPX_CORE_CNT30_LMPITP_TIMER_MASK) +#define SSPX_CORE_CNT32 0x690 +#define SSPX_CORE_CNT32_POLL_TBURST_MAX_MASK GENMASK(7, 0) +#define SSPX_CORE_CNT32_POLL_TBURST_MAX(x) ((x) & \ + SSPX_CORE_CNT32_POLL_TBURST_MAX_MASK) +#define SSPX_CORE_CNT56 0x6fc +#define SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX_MASK GENMASK(19, 0) +#define SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX(x) ((x) & \ + SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX_MASK) +#define SSPX_CORE_CNT57 0x700 +#define SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX_MASK GENMASK(19, 0) +#define SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX(x) ((x) & \ + SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX_MASK) +#define SSPX_CORE_CNT65 0x720 +#define SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID_MASK GENMASK(19, 0) +#define SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID(x) ((x) & \ + SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID_MASK) +#define SSPX_CORE_CNT66 0x724 +#define SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID_MASK GENMASK(19, 0) +#define SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID(x) ((x) & \ + SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID_MASK) +#define SSPX_CORE_CNT67 0x728 +#define SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID_MASK GENMASK(19, 0) +#define SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID(x) ((x) & \ + SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID_MASK) +#define SSPX_CORE_CNT72 0x73c +#define SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT_MASK GENMASK(19, 0) +#define SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT(x) ((x) & \ + SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT_MASK) +#define SSPX_CORE_PADCTL4 0x750 +#define SSPX_CORE_PADCTL4_RXDAT_VLD_TIMEOUT_U3_MASK GENMASK(19, 0) +#define SSPX_CORE_PADCTL4_RXDAT_VLD_TIMEOUT_U3(x) ((x) & \ + SSPX_CORE_PADCTL4_RXDAT_VLD_TIMEOUT_U3_MASK) +#define BLCG_DFPCI BIT(0) +#define BLCG_UFPCI BIT(1) +#define BLCG_FE BIT(2) +#define BLCG_COREPLL_PWRDN BIT(8) +#define BLCG_IOPLL_0_PWRDN BIT(9) +#define BLCG_IOPLL_1_PWRDN BIT(10) +#define BLCG_IOPLL_2_PWRDN BIT(11) +#define BLCG_ALL 0x1ff +#define CFG_DEV_SSPI_XFER 0x858 +#define CFG_DEV_SSPI_XFER_ACKTIMEOUT_MASK GENMASK(31, 0) +#define CFG_DEV_SSPI_XFER_ACKTIMEOUT(x) ((x) & \ + CFG_DEV_SSPI_XFER_ACKTIMEOUT_MASK) +#define CFG_DEV_FE 0x85c +#define CFG_DEV_FE_PORTREGSEL_MASK GENMASK(1, 0) +#define CFG_DEV_FE_PORTREGSEL_SS_PI 1 +#define CFG_DEV_FE_PORTREGSEL_HSFS_PI 2 +#define CFG_DEV_FE_PORTREGSEL(x) ((x) & CFG_DEV_FE_PORTREGSEL_MASK) +#define CFG_DEV_FE_INFINITE_SS_RETRY BIT(29) + +/* FPCI registers */ +#define XUSB_DEV_CFG_1 0x004 +#define XUSB_DEV_CFG_1_IO_SPACE_EN BIT(0) +#define XUSB_DEV_CFG_1_MEMORY_SPACE_EN BIT(1) +#define XUSB_DEV_CFG_1_BUS_MASTER_EN BIT(2) +#define XUSB_DEV_CFG_4 0x010 +#define XUSB_DEV_CFG_4_BASE_ADDR_MASK GENMASK(31, 15) +#define XUSB_DEV_CFG_5 0x014 + +/* IPFS registers */ +#define XUSB_DEV_CONFIGURATION_0 0x180 +#define XUSB_DEV_CONFIGURATION_0_EN_FPCI BIT(0) +#define XUSB_DEV_INTR_MASK_0 0x188 +#define XUSB_DEV_INTR_MASK_0_IP_INT_MASK BIT(16) + +struct tegra_xudc_ep_context { + __le32 info0; + __le32 info1; + __le32 deq_lo; + __le32 deq_hi; + __le32 tx_info; + __le32 rsvd[11]; +}; + +#define EP_STATE_DISABLED 0 +#define EP_STATE_RUNNING 1 +#define EP_STATE_HALTED 2 +#define EP_STATE_STOPPED 3 +#define EP_STATE_ERROR 4 + +#define EP_TYPE_INVALID 0 +#define EP_TYPE_ISOCH_OUT 1 +#define EP_TYPE_BULK_OUT 2 +#define EP_TYPE_INTERRUPT_OUT 3 +#define EP_TYPE_CONTROL 4 +#define EP_TYPE_ISCOH_IN 5 +#define EP_TYPE_BULK_IN 6 +#define EP_TYPE_INTERRUPT_IN 7 + +#define BUILD_EP_CONTEXT_RW(name, member, shift, mask) \ +static inline u32 ep_ctx_read_##name(struct tegra_xudc_ep_context *ctx) \ +{ \ + return (le32_to_cpu(ctx->member) >> (shift)) & (mask); \ +} \ +static inline void \ +ep_ctx_write_##name(struct tegra_xudc_ep_context *ctx, u32 val) \ +{ \ + u32 tmp; \ + \ + tmp = le32_to_cpu(ctx->member) & ~((mask) << (shift)); \ + tmp |= (val & (mask)) << (shift); \ + ctx->member = cpu_to_le32(tmp); \ +} + +BUILD_EP_CONTEXT_RW(state, info0, 0, 0x7) +BUILD_EP_CONTEXT_RW(mult, info0, 8, 0x3) +BUILD_EP_CONTEXT_RW(max_pstreams, info0, 10, 0x1f) +BUILD_EP_CONTEXT_RW(lsa, info0, 15, 0x1) +BUILD_EP_CONTEXT_RW(interval, info0, 16, 0xff) +BUILD_EP_CONTEXT_RW(cerr, info1, 1, 0x3) +BUILD_EP_CONTEXT_RW(type, info1, 3, 0x7) +BUILD_EP_CONTEXT_RW(hid, info1, 7, 0x1) +BUILD_EP_CONTEXT_RW(max_burst_size, info1, 8, 0xff) +BUILD_EP_CONTEXT_RW(max_packet_size, info1, 16, 0xffff) +BUILD_EP_CONTEXT_RW(dcs, deq_lo, 0, 0x1) +BUILD_EP_CONTEXT_RW(deq_lo, deq_lo, 4, 0xfffffff) +BUILD_EP_CONTEXT_RW(deq_hi, deq_hi, 0, 0xffffffff) +BUILD_EP_CONTEXT_RW(avg_trb_len, tx_info, 0, 0xffff) +BUILD_EP_CONTEXT_RW(max_esit_payload, tx_info, 16, 0xffff) +BUILD_EP_CONTEXT_RW(edtla, rsvd[0], 0, 0xffffff) +BUILD_EP_CONTEXT_RW(rsvd, rsvd[0], 24, 0x1) +BUILD_EP_CONTEXT_RW(partial_td, rsvd[0], 25, 0x1) +BUILD_EP_CONTEXT_RW(splitxstate, rsvd[0], 26, 0x1) +BUILD_EP_CONTEXT_RW(seq_num, rsvd[0], 27, 0x1f) +BUILD_EP_CONTEXT_RW(cerrcnt, rsvd[1], 18, 0x3) +BUILD_EP_CONTEXT_RW(data_offset, rsvd[2], 0, 0x1ffff) +BUILD_EP_CONTEXT_RW(numtrbs, rsvd[2], 22, 0x1f) +BUILD_EP_CONTEXT_RW(devaddr, rsvd[6], 0, 0x7f) + +static inline u64 ep_ctx_read_deq_ptr(struct tegra_xudc_ep_context *ctx) +{ + return ((u64)ep_ctx_read_deq_hi(ctx) << 32) | + (ep_ctx_read_deq_lo(ctx) << 4); +} + +static inline void +ep_ctx_write_deq_ptr(struct tegra_xudc_ep_context *ctx, u64 addr) +{ + ep_ctx_write_deq_lo(ctx, lower_32_bits(addr) >> 4); + ep_ctx_write_deq_hi(ctx, upper_32_bits(addr)); +} + +struct tegra_xudc_trb { + __le32 data_lo; + __le32 data_hi; + __le32 status; + __le32 control; +}; + +#define TRB_TYPE_RSVD 0 +#define TRB_TYPE_NORMAL 1 +#define TRB_TYPE_SETUP_STAGE 2 +#define TRB_TYPE_DATA_STAGE 3 +#define TRB_TYPE_STATUS_STAGE 4 +#define TRB_TYPE_ISOCH 5 +#define TRB_TYPE_LINK 6 +#define TRB_TYPE_TRANSFER_EVENT 32 +#define TRB_TYPE_PORT_STATUS_CHANGE_EVENT 34 +#define TRB_TYPE_STREAM 48 +#define TRB_TYPE_SETUP_PACKET_EVENT 63 + +#define TRB_CMPL_CODE_INVALID 0 +#define TRB_CMPL_CODE_SUCCESS 1 +#define TRB_CMPL_CODE_DATA_BUFFER_ERR 2 +#define TRB_CMPL_CODE_BABBLE_DETECTED_ERR 3 +#define TRB_CMPL_CODE_USB_TRANS_ERR 4 +#define TRB_CMPL_CODE_TRB_ERR 5 +#define TRB_CMPL_CODE_STALL 6 +#define TRB_CMPL_CODE_INVALID_STREAM_TYPE_ERR 10 +#define TRB_CMPL_CODE_SHORT_PACKET 13 +#define TRB_CMPL_CODE_RING_UNDERRUN 14 +#define TRB_CMPL_CODE_RING_OVERRUN 15 +#define TRB_CMPL_CODE_EVENT_RING_FULL_ERR 21 +#define TRB_CMPL_CODE_STOPPED 26 +#define TRB_CMPL_CODE_ISOCH_BUFFER_OVERRUN 31 +#define TRB_CMPL_CODE_STREAM_NUMP_ERROR 219 +#define TRB_CMPL_CODE_PRIME_PIPE_RECEIVED 220 +#define TRB_CMPL_CODE_HOST_REJECTED 221 +#define TRB_CMPL_CODE_CTRL_DIR_ERR 222 +#define TRB_CMPL_CODE_CTRL_SEQNUM_ERR 223 + +#define BUILD_TRB_RW(name, member, shift, mask) \ +static inline u32 trb_read_##name(struct tegra_xudc_trb *trb) \ +{ \ + return (le32_to_cpu(trb->member) >> (shift)) & (mask); \ +} \ +static inline void \ +trb_write_##name(struct tegra_xudc_trb *trb, u32 val) \ +{ \ + u32 tmp; \ + \ + tmp = le32_to_cpu(trb->member) & ~((mask) << (shift)); \ + tmp |= (val & (mask)) << (shift); \ + trb->member = cpu_to_le32(tmp); \ +} + +BUILD_TRB_RW(data_lo, data_lo, 0, 0xffffffff) +BUILD_TRB_RW(data_hi, data_hi, 0, 0xffffffff) +BUILD_TRB_RW(seq_num, status, 0, 0xffff) +BUILD_TRB_RW(transfer_len, status, 0, 0xffffff) +BUILD_TRB_RW(td_size, status, 17, 0x1f) +BUILD_TRB_RW(cmpl_code, status, 24, 0xff) +BUILD_TRB_RW(cycle, control, 0, 0x1) +BUILD_TRB_RW(toggle_cycle, control, 1, 0x1) +BUILD_TRB_RW(isp, control, 2, 0x1) +BUILD_TRB_RW(chain, control, 4, 0x1) +BUILD_TRB_RW(ioc, control, 5, 0x1) +BUILD_TRB_RW(type, control, 10, 0x3f) +BUILD_TRB_RW(stream_id, control, 16, 0xffff) +BUILD_TRB_RW(endpoint_id, control, 16, 0x1f) +BUILD_TRB_RW(tlbpc, control, 16, 0xf) +BUILD_TRB_RW(data_stage_dir, control, 16, 0x1) +BUILD_TRB_RW(frame_id, control, 20, 0x7ff) +BUILD_TRB_RW(sia, control, 31, 0x1) + +static inline u64 trb_read_data_ptr(struct tegra_xudc_trb *trb) +{ + return ((u64)trb_read_data_hi(trb) << 32) | + trb_read_data_lo(trb); +} + +static inline void trb_write_data_ptr(struct tegra_xudc_trb *trb, u64 addr) +{ + trb_write_data_lo(trb, lower_32_bits(addr)); + trb_write_data_hi(trb, upper_32_bits(addr)); +} + +struct tegra_xudc_request { + struct usb_request usb_req; + + size_t buf_queued; + unsigned int trbs_queued; + unsigned int trbs_needed; + bool need_zlp; + + struct tegra_xudc_trb *first_trb; + struct tegra_xudc_trb *last_trb; + + struct list_head list; +}; + +struct tegra_xudc_ep { + struct tegra_xudc *xudc; + struct usb_ep usb_ep; + unsigned int index; + char name[8]; + + struct tegra_xudc_ep_context *context; + +#define XUDC_TRANSFER_RING_SIZE 64 + struct tegra_xudc_trb *transfer_ring; + dma_addr_t transfer_ring_phys; + + unsigned int enq_ptr; + unsigned int deq_ptr; + bool pcs; + bool ring_full; + bool stream_rejected; + + struct list_head queue; + const struct usb_endpoint_descriptor *desc; + const struct usb_ss_ep_comp_descriptor *comp_desc; +}; + +struct tegra_xudc_sel_timing { + __u8 u1sel; + __u8 u1pel; + __le16 u2sel; + __le16 u2pel; +}; + +enum tegra_xudc_setup_state { + WAIT_FOR_SETUP, + DATA_STAGE_XFER, + DATA_STAGE_RECV, + STATUS_STAGE_XFER, + STATUS_STAGE_RECV, +}; + +struct tegra_xudc_setup_packet { + struct usb_ctrlrequest ctrl_req; + unsigned int seq_num; +}; + +struct tegra_xudc_save_regs { + u32 ctrl; + u32 portpm; +}; + +struct tegra_xudc { + struct device *dev; + const struct tegra_xudc_soc *soc; + struct tegra_xusb_padctl *padctl; + + spinlock_t lock; + + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + +#define XUDC_NR_EVENT_RINGS 2 +#define XUDC_EVENT_RING_SIZE 4096 + struct tegra_xudc_trb *event_ring[XUDC_NR_EVENT_RINGS]; + dma_addr_t event_ring_phys[XUDC_NR_EVENT_RINGS]; + unsigned int event_ring_index; + unsigned int event_ring_deq_ptr; + bool ccs; + +#define XUDC_NR_EPS 32 + struct tegra_xudc_ep ep[XUDC_NR_EPS]; + struct tegra_xudc_ep_context *ep_context; + dma_addr_t ep_context_phys; + + struct device *genpd_dev_device; + struct device *genpd_dev_ss; + struct device_link *genpd_dl_device; + struct device_link *genpd_dl_ss; + + struct dma_pool *transfer_ring_pool; + + bool queued_setup_packet; + struct tegra_xudc_setup_packet setup_packet; + enum tegra_xudc_setup_state setup_state; + u16 setup_seq_num; + + u16 dev_addr; + u16 isoch_delay; + struct tegra_xudc_sel_timing sel_timing; + u8 test_mode_pattern; + u16 status_buf; + struct tegra_xudc_request *ep0_req; + + bool pullup; + + unsigned int nr_enabled_eps; + unsigned int nr_isoch_eps; + + unsigned int device_state; + unsigned int resume_state; + + int irq; + + void __iomem *base; + resource_size_t phys_base; + void __iomem *ipfs; + void __iomem *fpci; + + struct regulator_bulk_data *supplies; + + struct clk_bulk_data *clks; + + bool device_mode; + struct work_struct usb_role_sw_work; + + struct phy **usb3_phy; + struct phy *curr_usb3_phy; + struct phy **utmi_phy; + struct phy *curr_utmi_phy; + + struct tegra_xudc_save_regs saved_regs; + bool suspended; + bool powergated; + + struct usb_phy **usbphy; + struct usb_phy *curr_usbphy; + struct notifier_block vbus_nb; + + struct completion disconnect_complete; + + bool selfpowered; + +#define TOGGLE_VBUS_WAIT_MS 100 + struct delayed_work plc_reset_work; + bool wait_csc; + + struct delayed_work port_reset_war_work; + bool wait_for_sec_prc; +}; + +#define XUDC_TRB_MAX_BUFFER_SIZE 65536 +#define XUDC_MAX_ISOCH_EPS 4 +#define XUDC_INTERRUPT_MODERATION_US 0 + +static struct usb_endpoint_descriptor tegra_xudc_ep0_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 0, + .bmAttributes = USB_ENDPOINT_XFER_CONTROL, + .wMaxPacketSize = cpu_to_le16(64), +}; + +struct tegra_xudc_soc { + const char * const *supply_names; + unsigned int num_supplies; + const char * const *clock_names; + unsigned int num_clks; + unsigned int num_phys; + bool u1_enable; + bool u2_enable; + bool lpm_enable; + bool invalid_seq_num; + bool pls_quirk; + bool port_reset_quirk; + bool port_speed_quirk; + bool has_ipfs; +}; + +static inline u32 fpci_readl(struct tegra_xudc *xudc, unsigned int offset) +{ + return readl(xudc->fpci + offset); +} + +static inline void fpci_writel(struct tegra_xudc *xudc, u32 val, + unsigned int offset) +{ + writel(val, xudc->fpci + offset); +} + +static inline u32 ipfs_readl(struct tegra_xudc *xudc, unsigned int offset) +{ + return readl(xudc->ipfs + offset); +} + +static inline void ipfs_writel(struct tegra_xudc *xudc, u32 val, + unsigned int offset) +{ + writel(val, xudc->ipfs + offset); +} + +static inline u32 xudc_readl(struct tegra_xudc *xudc, unsigned int offset) +{ + return readl(xudc->base + offset); +} + +static inline void xudc_writel(struct tegra_xudc *xudc, u32 val, + unsigned int offset) +{ + writel(val, xudc->base + offset); +} + +static inline int xudc_readl_poll(struct tegra_xudc *xudc, + unsigned int offset, u32 mask, u32 val) +{ + u32 regval; + + return readl_poll_timeout_atomic(xudc->base + offset, regval, + (regval & mask) == val, 1, 100); +} + +static inline struct tegra_xudc *to_xudc(struct usb_gadget *gadget) +{ + return container_of(gadget, struct tegra_xudc, gadget); +} + +static inline struct tegra_xudc_ep *to_xudc_ep(struct usb_ep *ep) +{ + return container_of(ep, struct tegra_xudc_ep, usb_ep); +} + +static inline struct tegra_xudc_request *to_xudc_req(struct usb_request *req) +{ + return container_of(req, struct tegra_xudc_request, usb_req); +} + +static inline void dump_trb(struct tegra_xudc *xudc, const char *type, + struct tegra_xudc_trb *trb) +{ + dev_dbg(xudc->dev, + "%s: %p, lo = %#x, hi = %#x, status = %#x, control = %#x\n", + type, trb, trb->data_lo, trb->data_hi, trb->status, + trb->control); +} + +static void tegra_xudc_limit_port_speed(struct tegra_xudc *xudc) +{ + u32 val; + + /* limit port speed to gen 1 */ + val = xudc_readl(xudc, SSPX_CORE_CNT56); + val &= ~(SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX_MASK); + val |= SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX(0x260); + xudc_writel(xudc, val, SSPX_CORE_CNT56); + + val = xudc_readl(xudc, SSPX_CORE_CNT57); + val &= ~(SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX_MASK); + val |= SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX(0x6D6); + xudc_writel(xudc, val, SSPX_CORE_CNT57); + + val = xudc_readl(xudc, SSPX_CORE_CNT65); + val &= ~(SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID_MASK); + val |= SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID(0x4B0); + xudc_writel(xudc, val, SSPX_CORE_CNT66); + + val = xudc_readl(xudc, SSPX_CORE_CNT66); + val &= ~(SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID_MASK); + val |= SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID(0x4B0); + xudc_writel(xudc, val, SSPX_CORE_CNT66); + + val = xudc_readl(xudc, SSPX_CORE_CNT67); + val &= ~(SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID_MASK); + val |= SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID(0x4B0); + xudc_writel(xudc, val, SSPX_CORE_CNT67); + + val = xudc_readl(xudc, SSPX_CORE_CNT72); + val &= ~(SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT_MASK); + val |= SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT(0x10); + xudc_writel(xudc, val, SSPX_CORE_CNT72); +} + +static void tegra_xudc_restore_port_speed(struct tegra_xudc *xudc) +{ + u32 val; + + /* restore port speed to gen2 */ + val = xudc_readl(xudc, SSPX_CORE_CNT56); + val &= ~(SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX_MASK); + val |= SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX(0x438); + xudc_writel(xudc, val, SSPX_CORE_CNT56); + + val = xudc_readl(xudc, SSPX_CORE_CNT57); + val &= ~(SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX_MASK); + val |= SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX(0x528); + xudc_writel(xudc, val, SSPX_CORE_CNT57); + + val = xudc_readl(xudc, SSPX_CORE_CNT65); + val &= ~(SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID_MASK); + val |= SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID(0xE10); + xudc_writel(xudc, val, SSPX_CORE_CNT66); + + val = xudc_readl(xudc, SSPX_CORE_CNT66); + val &= ~(SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID_MASK); + val |= SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID(0x348); + xudc_writel(xudc, val, SSPX_CORE_CNT66); + + val = xudc_readl(xudc, SSPX_CORE_CNT67); + val &= ~(SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID_MASK); + val |= SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID(0x5a0); + xudc_writel(xudc, val, SSPX_CORE_CNT67); + + val = xudc_readl(xudc, SSPX_CORE_CNT72); + val &= ~(SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT_MASK); + val |= SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT(0x1c21); + xudc_writel(xudc, val, SSPX_CORE_CNT72); +} + +static void tegra_xudc_device_mode_on(struct tegra_xudc *xudc) +{ + int err; + + pm_runtime_get_sync(xudc->dev); + + tegra_phy_xusb_utmi_pad_power_on(xudc->curr_utmi_phy); + + err = phy_power_on(xudc->curr_utmi_phy); + if (err < 0) + dev_err(xudc->dev, "UTMI power on failed: %d\n", err); + + err = phy_power_on(xudc->curr_usb3_phy); + if (err < 0) + dev_err(xudc->dev, "USB3 PHY power on failed: %d\n", err); + + dev_dbg(xudc->dev, "device mode on\n"); + + phy_set_mode_ext(xudc->curr_utmi_phy, PHY_MODE_USB_OTG, + USB_ROLE_DEVICE); +} + +static void tegra_xudc_device_mode_off(struct tegra_xudc *xudc) +{ + bool connected = false; + u32 pls, val; + int err; + + dev_dbg(xudc->dev, "device mode off\n"); + + connected = !!(xudc_readl(xudc, PORTSC) & PORTSC_CCS); + + reinit_completion(&xudc->disconnect_complete); + + if (xudc->soc->port_speed_quirk) + tegra_xudc_restore_port_speed(xudc); + + phy_set_mode_ext(xudc->curr_utmi_phy, PHY_MODE_USB_OTG, USB_ROLE_NONE); + + pls = (xudc_readl(xudc, PORTSC) & PORTSC_PLS_MASK) >> + PORTSC_PLS_SHIFT; + + /* Direct link to U0 if disconnected in RESUME or U2. */ + if (xudc->soc->pls_quirk && xudc->gadget.speed == USB_SPEED_SUPER && + (pls == PORTSC_PLS_RESUME || pls == PORTSC_PLS_U2)) { + val = xudc_readl(xudc, PORTPM); + val |= PORTPM_FRWE; + xudc_writel(xudc, val, PORTPM); + + val = xudc_readl(xudc, PORTSC); + val &= ~(PORTSC_CHANGE_MASK | PORTSC_PLS_MASK); + val |= PORTSC_LWS | PORTSC_PLS(PORTSC_PLS_U0); + xudc_writel(xudc, val, PORTSC); + } + + /* Wait for disconnect event. */ + if (connected) + wait_for_completion(&xudc->disconnect_complete); + + /* Make sure interrupt handler has completed before powergating. */ + synchronize_irq(xudc->irq); + + tegra_phy_xusb_utmi_pad_power_down(xudc->curr_utmi_phy); + + err = phy_power_off(xudc->curr_utmi_phy); + if (err < 0) + dev_err(xudc->dev, "UTMI PHY power off failed: %d\n", err); + + err = phy_power_off(xudc->curr_usb3_phy); + if (err < 0) + dev_err(xudc->dev, "USB3 PHY power off failed: %d\n", err); + + pm_runtime_put(xudc->dev); +} + +static void tegra_xudc_usb_role_sw_work(struct work_struct *work) +{ + struct tegra_xudc *xudc = container_of(work, struct tegra_xudc, + usb_role_sw_work); + + if (xudc->device_mode) + tegra_xudc_device_mode_on(xudc); + else + tegra_xudc_device_mode_off(xudc); +} + +static int tegra_xudc_get_phy_index(struct tegra_xudc *xudc, + struct usb_phy *usbphy) +{ + unsigned int i; + + for (i = 0; i < xudc->soc->num_phys; i++) { + if (xudc->usbphy[i] && usbphy == xudc->usbphy[i]) + return i; + } + + dev_info(xudc->dev, "phy index could not be found for shared USB PHY"); + return -1; +} + +static int tegra_xudc_vbus_notify(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct tegra_xudc *xudc = container_of(nb, struct tegra_xudc, + vbus_nb); + struct usb_phy *usbphy = (struct usb_phy *)data; + int phy_index; + + dev_dbg(xudc->dev, "%s(): event is %d\n", __func__, usbphy->last_event); + + if ((xudc->device_mode && usbphy->last_event == USB_EVENT_VBUS) || + (!xudc->device_mode && usbphy->last_event != USB_EVENT_VBUS)) { + dev_dbg(xudc->dev, "Same role(%d) received. Ignore", + xudc->device_mode); + return NOTIFY_OK; + } + + xudc->device_mode = (usbphy->last_event == USB_EVENT_VBUS) ? true : + false; + + phy_index = tegra_xudc_get_phy_index(xudc, usbphy); + dev_dbg(xudc->dev, "%s(): current phy index is %d\n", __func__, + phy_index); + + if (!xudc->suspended && phy_index != -1) { + xudc->curr_utmi_phy = xudc->utmi_phy[phy_index]; + xudc->curr_usb3_phy = xudc->usb3_phy[phy_index]; + xudc->curr_usbphy = usbphy; + schedule_work(&xudc->usb_role_sw_work); + } + + return NOTIFY_OK; +} + +static void tegra_xudc_plc_reset_work(struct work_struct *work) +{ + struct delayed_work *dwork = to_delayed_work(work); + struct tegra_xudc *xudc = container_of(dwork, struct tegra_xudc, + plc_reset_work); + unsigned long flags; + + spin_lock_irqsave(&xudc->lock, flags); + + if (xudc->wait_csc) { + u32 pls = (xudc_readl(xudc, PORTSC) & PORTSC_PLS_MASK) >> + PORTSC_PLS_SHIFT; + + if (pls == PORTSC_PLS_INACTIVE) { + dev_info(xudc->dev, "PLS = Inactive. Toggle VBUS\n"); + phy_set_mode_ext(xudc->curr_utmi_phy, PHY_MODE_USB_OTG, + USB_ROLE_NONE); + phy_set_mode_ext(xudc->curr_utmi_phy, PHY_MODE_USB_OTG, + USB_ROLE_DEVICE); + + xudc->wait_csc = false; + } + } + + spin_unlock_irqrestore(&xudc->lock, flags); +} + +static void tegra_xudc_port_reset_war_work(struct work_struct *work) +{ + struct delayed_work *dwork = to_delayed_work(work); + struct tegra_xudc *xudc = + container_of(dwork, struct tegra_xudc, port_reset_war_work); + unsigned long flags; + u32 pls; + int ret; + + spin_lock_irqsave(&xudc->lock, flags); + + if (xudc->device_mode && xudc->wait_for_sec_prc) { + pls = (xudc_readl(xudc, PORTSC) & PORTSC_PLS_MASK) >> + PORTSC_PLS_SHIFT; + dev_dbg(xudc->dev, "pls = %x\n", pls); + + if (pls == PORTSC_PLS_DISABLED) { + dev_dbg(xudc->dev, "toggle vbus\n"); + /* PRC doesn't complete in 100ms, toggle the vbus */ + ret = tegra_phy_xusb_utmi_port_reset( + xudc->curr_utmi_phy); + if (ret == 1) + xudc->wait_for_sec_prc = 0; + } + } + + spin_unlock_irqrestore(&xudc->lock, flags); +} + +static dma_addr_t trb_virt_to_phys(struct tegra_xudc_ep *ep, + struct tegra_xudc_trb *trb) +{ + unsigned int index; + + index = trb - ep->transfer_ring; + + if (WARN_ON(index >= XUDC_TRANSFER_RING_SIZE)) + return 0; + + return (ep->transfer_ring_phys + index * sizeof(*trb)); +} + +static struct tegra_xudc_trb *trb_phys_to_virt(struct tegra_xudc_ep *ep, + dma_addr_t addr) +{ + struct tegra_xudc_trb *trb; + unsigned int index; + + index = (addr - ep->transfer_ring_phys) / sizeof(*trb); + + if (WARN_ON(index >= XUDC_TRANSFER_RING_SIZE)) + return NULL; + + trb = &ep->transfer_ring[index]; + + return trb; +} + +static void ep_reload(struct tegra_xudc *xudc, unsigned int ep) +{ + xudc_writel(xudc, BIT(ep), EP_RELOAD); + xudc_readl_poll(xudc, EP_RELOAD, BIT(ep), 0); +} + +static void ep_pause(struct tegra_xudc *xudc, unsigned int ep) +{ + u32 val; + + val = xudc_readl(xudc, EP_PAUSE); + if (val & BIT(ep)) + return; + val |= BIT(ep); + + xudc_writel(xudc, val, EP_PAUSE); + + xudc_readl_poll(xudc, EP_STCHG, BIT(ep), BIT(ep)); + + xudc_writel(xudc, BIT(ep), EP_STCHG); +} + +static void ep_unpause(struct tegra_xudc *xudc, unsigned int ep) +{ + u32 val; + + val = xudc_readl(xudc, EP_PAUSE); + if (!(val & BIT(ep))) + return; + val &= ~BIT(ep); + + xudc_writel(xudc, val, EP_PAUSE); + + xudc_readl_poll(xudc, EP_STCHG, BIT(ep), BIT(ep)); + + xudc_writel(xudc, BIT(ep), EP_STCHG); +} + +static void ep_unpause_all(struct tegra_xudc *xudc) +{ + u32 val; + + val = xudc_readl(xudc, EP_PAUSE); + + xudc_writel(xudc, 0, EP_PAUSE); + + xudc_readl_poll(xudc, EP_STCHG, val, val); + + xudc_writel(xudc, val, EP_STCHG); +} + +static void ep_halt(struct tegra_xudc *xudc, unsigned int ep) +{ + u32 val; + + val = xudc_readl(xudc, EP_HALT); + if (val & BIT(ep)) + return; + val |= BIT(ep); + xudc_writel(xudc, val, EP_HALT); + + xudc_readl_poll(xudc, EP_STCHG, BIT(ep), BIT(ep)); + + xudc_writel(xudc, BIT(ep), EP_STCHG); +} + +static void ep_unhalt(struct tegra_xudc *xudc, unsigned int ep) +{ + u32 val; + + val = xudc_readl(xudc, EP_HALT); + if (!(val & BIT(ep))) + return; + val &= ~BIT(ep); + xudc_writel(xudc, val, EP_HALT); + + xudc_readl_poll(xudc, EP_STCHG, BIT(ep), BIT(ep)); + + xudc_writel(xudc, BIT(ep), EP_STCHG); +} + +static void ep_unhalt_all(struct tegra_xudc *xudc) +{ + u32 val; + + val = xudc_readl(xudc, EP_HALT); + if (!val) + return; + xudc_writel(xudc, 0, EP_HALT); + + xudc_readl_poll(xudc, EP_STCHG, val, val); + + xudc_writel(xudc, val, EP_STCHG); +} + +static void ep_wait_for_stopped(struct tegra_xudc *xudc, unsigned int ep) +{ + xudc_readl_poll(xudc, EP_STOPPED, BIT(ep), BIT(ep)); + xudc_writel(xudc, BIT(ep), EP_STOPPED); +} + +static void ep_wait_for_inactive(struct tegra_xudc *xudc, unsigned int ep) +{ + xudc_readl_poll(xudc, EP_THREAD_ACTIVE, BIT(ep), 0); +} + +static void tegra_xudc_req_done(struct tegra_xudc_ep *ep, + struct tegra_xudc_request *req, int status) +{ + struct tegra_xudc *xudc = ep->xudc; + + dev_dbg(xudc->dev, "completing request %p on EP %u with status %d\n", + req, ep->index, status); + + if (likely(req->usb_req.status == -EINPROGRESS)) + req->usb_req.status = status; + + list_del_init(&req->list); + + if (usb_endpoint_xfer_control(ep->desc)) { + usb_gadget_unmap_request(&xudc->gadget, &req->usb_req, + (xudc->setup_state == + DATA_STAGE_XFER)); + } else { + usb_gadget_unmap_request(&xudc->gadget, &req->usb_req, + usb_endpoint_dir_in(ep->desc)); + } + + spin_unlock(&xudc->lock); + usb_gadget_giveback_request(&ep->usb_ep, &req->usb_req); + spin_lock(&xudc->lock); +} + +static void tegra_xudc_ep_nuke(struct tegra_xudc_ep *ep, int status) +{ + struct tegra_xudc_request *req; + + while (!list_empty(&ep->queue)) { + req = list_first_entry(&ep->queue, struct tegra_xudc_request, + list); + tegra_xudc_req_done(ep, req, status); + } +} + +static unsigned int ep_available_trbs(struct tegra_xudc_ep *ep) +{ + if (ep->ring_full) + return 0; + + if (ep->deq_ptr > ep->enq_ptr) + return ep->deq_ptr - ep->enq_ptr - 1; + + return XUDC_TRANSFER_RING_SIZE - (ep->enq_ptr - ep->deq_ptr) - 2; +} + +static void tegra_xudc_queue_one_trb(struct tegra_xudc_ep *ep, + struct tegra_xudc_request *req, + struct tegra_xudc_trb *trb, + bool ioc) +{ + struct tegra_xudc *xudc = ep->xudc; + dma_addr_t buf_addr; + size_t len; + + len = min_t(size_t, XUDC_TRB_MAX_BUFFER_SIZE, req->usb_req.length - + req->buf_queued); + if (len > 0) + buf_addr = req->usb_req.dma + req->buf_queued; + else + buf_addr = 0; + + trb_write_data_ptr(trb, buf_addr); + + trb_write_transfer_len(trb, len); + trb_write_td_size(trb, req->trbs_needed - req->trbs_queued - 1); + + if (req->trbs_queued == req->trbs_needed - 1 || + (req->need_zlp && req->trbs_queued == req->trbs_needed - 2)) + trb_write_chain(trb, 0); + else + trb_write_chain(trb, 1); + + trb_write_ioc(trb, ioc); + + if (usb_endpoint_dir_out(ep->desc) || + (usb_endpoint_xfer_control(ep->desc) && + (xudc->setup_state == DATA_STAGE_RECV))) + trb_write_isp(trb, 1); + else + trb_write_isp(trb, 0); + + if (usb_endpoint_xfer_control(ep->desc)) { + if (xudc->setup_state == DATA_STAGE_XFER || + xudc->setup_state == DATA_STAGE_RECV) + trb_write_type(trb, TRB_TYPE_DATA_STAGE); + else + trb_write_type(trb, TRB_TYPE_STATUS_STAGE); + + if (xudc->setup_state == DATA_STAGE_XFER || + xudc->setup_state == STATUS_STAGE_XFER) + trb_write_data_stage_dir(trb, 1); + else + trb_write_data_stage_dir(trb, 0); + } else if (usb_endpoint_xfer_isoc(ep->desc)) { + trb_write_type(trb, TRB_TYPE_ISOCH); + trb_write_sia(trb, 1); + trb_write_frame_id(trb, 0); + trb_write_tlbpc(trb, 0); + } else if (usb_ss_max_streams(ep->comp_desc)) { + trb_write_type(trb, TRB_TYPE_STREAM); + trb_write_stream_id(trb, req->usb_req.stream_id); + } else { + trb_write_type(trb, TRB_TYPE_NORMAL); + trb_write_stream_id(trb, 0); + } + + trb_write_cycle(trb, ep->pcs); + + req->trbs_queued++; + req->buf_queued += len; + + dump_trb(xudc, "TRANSFER", trb); +} + +static unsigned int tegra_xudc_queue_trbs(struct tegra_xudc_ep *ep, + struct tegra_xudc_request *req) +{ + unsigned int i, count, available; + bool wait_td = false; + + available = ep_available_trbs(ep); + count = req->trbs_needed - req->trbs_queued; + if (available < count) { + count = available; + ep->ring_full = true; + } + + /* + * To generate zero-length packet on USB bus, SW needs schedule a + * standalone zero-length TD. According to HW's behavior, SW needs + * to schedule TDs in different ways for different endpoint types. + * + * For control endpoint: + * - Data stage TD (IOC = 1, CH = 0) + * - Ring doorbell and wait transfer event + * - Data stage TD for ZLP (IOC = 1, CH = 0) + * - Ring doorbell + * + * For bulk and interrupt endpoints: + * - Normal transfer TD (IOC = 0, CH = 0) + * - Normal transfer TD for ZLP (IOC = 1, CH = 0) + * - Ring doorbell + */ + + if (req->need_zlp && usb_endpoint_xfer_control(ep->desc) && count > 1) + wait_td = true; + + if (!req->first_trb) + req->first_trb = &ep->transfer_ring[ep->enq_ptr]; + + for (i = 0; i < count; i++) { + struct tegra_xudc_trb *trb = &ep->transfer_ring[ep->enq_ptr]; + bool ioc = false; + + if ((i == count - 1) || (wait_td && i == count - 2)) + ioc = true; + + tegra_xudc_queue_one_trb(ep, req, trb, ioc); + req->last_trb = trb; + + ep->enq_ptr++; + if (ep->enq_ptr == XUDC_TRANSFER_RING_SIZE - 1) { + trb = &ep->transfer_ring[ep->enq_ptr]; + trb_write_cycle(trb, ep->pcs); + ep->pcs = !ep->pcs; + ep->enq_ptr = 0; + } + + if (ioc) + break; + } + + return count; +} + +static void tegra_xudc_ep_ring_doorbell(struct tegra_xudc_ep *ep) +{ + struct tegra_xudc *xudc = ep->xudc; + u32 val; + + if (list_empty(&ep->queue)) + return; + + val = DB_TARGET(ep->index); + if (usb_endpoint_xfer_control(ep->desc)) { + val |= DB_STREAMID(xudc->setup_seq_num); + } else if (usb_ss_max_streams(ep->comp_desc) > 0) { + struct tegra_xudc_request *req; + + /* Don't ring doorbell if the stream has been rejected. */ + if (ep->stream_rejected) + return; + + req = list_first_entry(&ep->queue, struct tegra_xudc_request, + list); + val |= DB_STREAMID(req->usb_req.stream_id); + } + + dev_dbg(xudc->dev, "ring doorbell: %#x\n", val); + xudc_writel(xudc, val, DB); +} + +static void tegra_xudc_ep_kick_queue(struct tegra_xudc_ep *ep) +{ + struct tegra_xudc_request *req; + bool trbs_queued = false; + + list_for_each_entry(req, &ep->queue, list) { + if (ep->ring_full) + break; + + if (tegra_xudc_queue_trbs(ep, req) > 0) + trbs_queued = true; + } + + if (trbs_queued) + tegra_xudc_ep_ring_doorbell(ep); +} + +static int +__tegra_xudc_ep_queue(struct tegra_xudc_ep *ep, struct tegra_xudc_request *req) +{ + struct tegra_xudc *xudc = ep->xudc; + int err; + + if (usb_endpoint_xfer_control(ep->desc) && !list_empty(&ep->queue)) { + dev_err(xudc->dev, "control EP has pending transfers\n"); + return -EINVAL; + } + + if (usb_endpoint_xfer_control(ep->desc)) { + err = usb_gadget_map_request(&xudc->gadget, &req->usb_req, + (xudc->setup_state == + DATA_STAGE_XFER)); + } else { + err = usb_gadget_map_request(&xudc->gadget, &req->usb_req, + usb_endpoint_dir_in(ep->desc)); + } + + if (err < 0) { + dev_err(xudc->dev, "failed to map request: %d\n", err); + return err; + } + + req->first_trb = NULL; + req->last_trb = NULL; + req->buf_queued = 0; + req->trbs_queued = 0; + req->need_zlp = false; + req->trbs_needed = DIV_ROUND_UP(req->usb_req.length, + XUDC_TRB_MAX_BUFFER_SIZE); + if (req->usb_req.length == 0) + req->trbs_needed++; + + if (!usb_endpoint_xfer_isoc(ep->desc) && + req->usb_req.zero && req->usb_req.length && + ((req->usb_req.length % ep->usb_ep.maxpacket) == 0)) { + req->trbs_needed++; + req->need_zlp = true; + } + + req->usb_req.status = -EINPROGRESS; + req->usb_req.actual = 0; + + list_add_tail(&req->list, &ep->queue); + + tegra_xudc_ep_kick_queue(ep); + + return 0; +} + +static int +tegra_xudc_ep_queue(struct usb_ep *usb_ep, struct usb_request *usb_req, + gfp_t gfp) +{ + struct tegra_xudc_request *req; + struct tegra_xudc_ep *ep; + struct tegra_xudc *xudc; + unsigned long flags; + int ret; + + if (!usb_ep || !usb_req) + return -EINVAL; + + ep = to_xudc_ep(usb_ep); + req = to_xudc_req(usb_req); + xudc = ep->xudc; + + spin_lock_irqsave(&xudc->lock, flags); + if (xudc->powergated || !ep->desc) { + ret = -ESHUTDOWN; + goto unlock; + } + + ret = __tegra_xudc_ep_queue(ep, req); +unlock: + spin_unlock_irqrestore(&xudc->lock, flags); + + return ret; +} + +static void squeeze_transfer_ring(struct tegra_xudc_ep *ep, + struct tegra_xudc_request *req) +{ + struct tegra_xudc_trb *trb = req->first_trb; + bool pcs_enq = trb_read_cycle(trb); + bool pcs; + + /* + * Clear out all the TRBs part of or after the cancelled request, + * and must correct trb cycle bit to the last un-enqueued state. + */ + while (trb != &ep->transfer_ring[ep->enq_ptr]) { + pcs = trb_read_cycle(trb); + memset(trb, 0, sizeof(*trb)); + trb_write_cycle(trb, !pcs); + trb++; + + if (trb_read_type(trb) == TRB_TYPE_LINK) + trb = ep->transfer_ring; + } + + /* Requests will be re-queued at the start of the cancelled request. */ + ep->enq_ptr = req->first_trb - ep->transfer_ring; + /* + * Retrieve the correct cycle bit state from the first trb of + * the cancelled request. + */ + ep->pcs = pcs_enq; + ep->ring_full = false; + list_for_each_entry_continue(req, &ep->queue, list) { + req->usb_req.status = -EINPROGRESS; + req->usb_req.actual = 0; + + req->first_trb = NULL; + req->last_trb = NULL; + req->buf_queued = 0; + req->trbs_queued = 0; + } +} + +/* + * Determine if the given TRB is in the range [first trb, last trb] for the + * given request. + */ +static bool trb_in_request(struct tegra_xudc_ep *ep, + struct tegra_xudc_request *req, + struct tegra_xudc_trb *trb) +{ + dev_dbg(ep->xudc->dev, "%s: request %p -> %p; trb %p\n", __func__, + req->first_trb, req->last_trb, trb); + + if (trb >= req->first_trb && (trb <= req->last_trb || + req->last_trb < req->first_trb)) + return true; + + if (trb < req->first_trb && trb <= req->last_trb && + req->last_trb < req->first_trb) + return true; + + return false; +} + +/* + * Determine if the given TRB is in the range [EP enqueue pointer, first TRB) + * for the given endpoint and request. + */ +static bool trb_before_request(struct tegra_xudc_ep *ep, + struct tegra_xudc_request *req, + struct tegra_xudc_trb *trb) +{ + struct tegra_xudc_trb *enq_trb = &ep->transfer_ring[ep->enq_ptr]; + + dev_dbg(ep->xudc->dev, "%s: request %p -> %p; enq ptr: %p; trb %p\n", + __func__, req->first_trb, req->last_trb, enq_trb, trb); + + if (trb < req->first_trb && (enq_trb <= trb || + req->first_trb < enq_trb)) + return true; + + if (trb > req->first_trb && req->first_trb < enq_trb && enq_trb <= trb) + return true; + + return false; +} + +static int +__tegra_xudc_ep_dequeue(struct tegra_xudc_ep *ep, + struct tegra_xudc_request *req) +{ + struct tegra_xudc *xudc = ep->xudc; + struct tegra_xudc_request *r = NULL, *iter; + struct tegra_xudc_trb *deq_trb; + bool busy, kick_queue = false; + int ret = 0; + + /* Make sure the request is actually queued to this endpoint. */ + list_for_each_entry(iter, &ep->queue, list) { + if (iter != req) + continue; + r = iter; + break; + } + + if (!r) + return -EINVAL; + + /* Request hasn't been queued in the transfer ring yet. */ + if (!req->trbs_queued) { + tegra_xudc_req_done(ep, req, -ECONNRESET); + return 0; + } + + /* Halt DMA for this endpoint. */ + if (ep_ctx_read_state(ep->context) == EP_STATE_RUNNING) { + ep_pause(xudc, ep->index); + ep_wait_for_inactive(xudc, ep->index); + } + + deq_trb = trb_phys_to_virt(ep, ep_ctx_read_deq_ptr(ep->context)); + /* Is the hardware processing the TRB at the dequeue pointer? */ + busy = (trb_read_cycle(deq_trb) == ep_ctx_read_dcs(ep->context)); + + if (trb_in_request(ep, req, deq_trb) && busy) { + /* + * Request has been partially completed or it hasn't + * started processing yet. + */ + dma_addr_t deq_ptr; + + squeeze_transfer_ring(ep, req); + + req->usb_req.actual = ep_ctx_read_edtla(ep->context); + tegra_xudc_req_done(ep, req, -ECONNRESET); + kick_queue = true; + + /* EDTLA is > 0: request has been partially completed */ + if (req->usb_req.actual > 0) { + /* + * Abort the pending transfer and update the dequeue + * pointer + */ + ep_ctx_write_edtla(ep->context, 0); + ep_ctx_write_partial_td(ep->context, 0); + ep_ctx_write_data_offset(ep->context, 0); + + deq_ptr = trb_virt_to_phys(ep, + &ep->transfer_ring[ep->enq_ptr]); + + if (dma_mapping_error(xudc->dev, deq_ptr)) { + ret = -EINVAL; + } else { + ep_ctx_write_deq_ptr(ep->context, deq_ptr); + ep_ctx_write_dcs(ep->context, ep->pcs); + ep_reload(xudc, ep->index); + } + } + } else if (trb_before_request(ep, req, deq_trb) && busy) { + /* Request hasn't started processing yet. */ + squeeze_transfer_ring(ep, req); + + tegra_xudc_req_done(ep, req, -ECONNRESET); + kick_queue = true; + } else { + /* + * Request has completed, but we haven't processed the + * completion event yet. + */ + tegra_xudc_req_done(ep, req, -ECONNRESET); + ret = -EINVAL; + } + + /* Resume the endpoint. */ + ep_unpause(xudc, ep->index); + + if (kick_queue) + tegra_xudc_ep_kick_queue(ep); + + return ret; +} + +static int +tegra_xudc_ep_dequeue(struct usb_ep *usb_ep, struct usb_request *usb_req) +{ + struct tegra_xudc_request *req; + struct tegra_xudc_ep *ep; + struct tegra_xudc *xudc; + unsigned long flags; + int ret; + + if (!usb_ep || !usb_req) + return -EINVAL; + + ep = to_xudc_ep(usb_ep); + req = to_xudc_req(usb_req); + xudc = ep->xudc; + + spin_lock_irqsave(&xudc->lock, flags); + + if (xudc->powergated || !ep->desc) { + ret = -ESHUTDOWN; + goto unlock; + } + + ret = __tegra_xudc_ep_dequeue(ep, req); +unlock: + spin_unlock_irqrestore(&xudc->lock, flags); + + return ret; +} + +static int __tegra_xudc_ep_set_halt(struct tegra_xudc_ep *ep, bool halt) +{ + struct tegra_xudc *xudc = ep->xudc; + + if (!ep->desc) + return -EINVAL; + + if (usb_endpoint_xfer_isoc(ep->desc)) { + dev_err(xudc->dev, "can't halt isochronous EP\n"); + return -ENOTSUPP; + } + + if (!!(xudc_readl(xudc, EP_HALT) & BIT(ep->index)) == halt) { + dev_dbg(xudc->dev, "EP %u already %s\n", ep->index, + halt ? "halted" : "not halted"); + return 0; + } + + if (halt) { + ep_halt(xudc, ep->index); + } else { + ep_ctx_write_state(ep->context, EP_STATE_DISABLED); + + ep_reload(xudc, ep->index); + + ep_ctx_write_state(ep->context, EP_STATE_RUNNING); + ep_ctx_write_rsvd(ep->context, 0); + ep_ctx_write_partial_td(ep->context, 0); + ep_ctx_write_splitxstate(ep->context, 0); + ep_ctx_write_seq_num(ep->context, 0); + + ep_reload(xudc, ep->index); + ep_unpause(xudc, ep->index); + ep_unhalt(xudc, ep->index); + + tegra_xudc_ep_ring_doorbell(ep); + } + + return 0; +} + +static int tegra_xudc_ep_set_halt(struct usb_ep *usb_ep, int value) +{ + struct tegra_xudc_ep *ep; + struct tegra_xudc *xudc; + unsigned long flags; + int ret; + + if (!usb_ep) + return -EINVAL; + + ep = to_xudc_ep(usb_ep); + xudc = ep->xudc; + + spin_lock_irqsave(&xudc->lock, flags); + if (xudc->powergated) { + ret = -ESHUTDOWN; + goto unlock; + } + + if (value && usb_endpoint_dir_in(ep->desc) && + !list_empty(&ep->queue)) { + dev_err(xudc->dev, "can't halt EP with requests pending\n"); + ret = -EAGAIN; + goto unlock; + } + + ret = __tegra_xudc_ep_set_halt(ep, value); +unlock: + spin_unlock_irqrestore(&xudc->lock, flags); + + return ret; +} + +static void tegra_xudc_ep_context_setup(struct tegra_xudc_ep *ep) +{ + const struct usb_endpoint_descriptor *desc = ep->desc; + const struct usb_ss_ep_comp_descriptor *comp_desc = ep->comp_desc; + struct tegra_xudc *xudc = ep->xudc; + u16 maxpacket, maxburst = 0, esit = 0; + u32 val; + + maxpacket = usb_endpoint_maxp(desc); + if (xudc->gadget.speed == USB_SPEED_SUPER) { + if (!usb_endpoint_xfer_control(desc)) + maxburst = comp_desc->bMaxBurst; + + if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) + esit = le16_to_cpu(comp_desc->wBytesPerInterval); + } else if ((xudc->gadget.speed < USB_SPEED_SUPER) && + (usb_endpoint_xfer_int(desc) || + usb_endpoint_xfer_isoc(desc))) { + if (xudc->gadget.speed == USB_SPEED_HIGH) { + maxburst = usb_endpoint_maxp_mult(desc) - 1; + if (maxburst == 0x3) { + dev_warn(xudc->dev, + "invalid endpoint maxburst\n"); + maxburst = 0x2; + } + } + esit = maxpacket * (maxburst + 1); + } + + memset(ep->context, 0, sizeof(*ep->context)); + + ep_ctx_write_state(ep->context, EP_STATE_RUNNING); + ep_ctx_write_interval(ep->context, desc->bInterval); + if (xudc->gadget.speed == USB_SPEED_SUPER) { + if (usb_endpoint_xfer_isoc(desc)) { + ep_ctx_write_mult(ep->context, + comp_desc->bmAttributes & 0x3); + } + + if (usb_endpoint_xfer_bulk(desc)) { + ep_ctx_write_max_pstreams(ep->context, + comp_desc->bmAttributes & + 0x1f); + ep_ctx_write_lsa(ep->context, 1); + } + } + + if (!usb_endpoint_xfer_control(desc) && usb_endpoint_dir_out(desc)) + val = usb_endpoint_type(desc); + else + val = usb_endpoint_type(desc) + EP_TYPE_CONTROL; + + ep_ctx_write_type(ep->context, val); + ep_ctx_write_cerr(ep->context, 0x3); + ep_ctx_write_max_packet_size(ep->context, maxpacket); + ep_ctx_write_max_burst_size(ep->context, maxburst); + + ep_ctx_write_deq_ptr(ep->context, ep->transfer_ring_phys); + ep_ctx_write_dcs(ep->context, ep->pcs); + + /* Select a reasonable average TRB length based on endpoint type. */ + switch (usb_endpoint_type(desc)) { + case USB_ENDPOINT_XFER_CONTROL: + val = 8; + break; + case USB_ENDPOINT_XFER_INT: + val = 1024; + break; + case USB_ENDPOINT_XFER_BULK: + case USB_ENDPOINT_XFER_ISOC: + default: + val = 3072; + break; + } + + ep_ctx_write_avg_trb_len(ep->context, val); + ep_ctx_write_max_esit_payload(ep->context, esit); + + ep_ctx_write_cerrcnt(ep->context, 0x3); +} + +static void setup_link_trb(struct tegra_xudc_ep *ep, + struct tegra_xudc_trb *trb) +{ + trb_write_data_ptr(trb, ep->transfer_ring_phys); + trb_write_type(trb, TRB_TYPE_LINK); + trb_write_toggle_cycle(trb, 1); +} + +static int __tegra_xudc_ep_disable(struct tegra_xudc_ep *ep) +{ + struct tegra_xudc *xudc = ep->xudc; + + if (ep_ctx_read_state(ep->context) == EP_STATE_DISABLED) { + dev_err(xudc->dev, "endpoint %u already disabled\n", + ep->index); + return -EINVAL; + } + + ep_ctx_write_state(ep->context, EP_STATE_DISABLED); + + ep_reload(xudc, ep->index); + + tegra_xudc_ep_nuke(ep, -ESHUTDOWN); + + xudc->nr_enabled_eps--; + if (usb_endpoint_xfer_isoc(ep->desc)) + xudc->nr_isoch_eps--; + + ep->desc = NULL; + ep->comp_desc = NULL; + + memset(ep->context, 0, sizeof(*ep->context)); + + ep_unpause(xudc, ep->index); + ep_unhalt(xudc, ep->index); + if (xudc_readl(xudc, EP_STOPPED) & BIT(ep->index)) + xudc_writel(xudc, BIT(ep->index), EP_STOPPED); + + /* + * If this is the last endpoint disabled in a de-configure request, + * switch back to address state. + */ + if ((xudc->device_state == USB_STATE_CONFIGURED) && + (xudc->nr_enabled_eps == 1)) { + u32 val; + + xudc->device_state = USB_STATE_ADDRESS; + usb_gadget_set_state(&xudc->gadget, xudc->device_state); + + val = xudc_readl(xudc, CTRL); + val &= ~CTRL_RUN; + xudc_writel(xudc, val, CTRL); + } + + dev_info(xudc->dev, "ep %u disabled\n", ep->index); + + return 0; +} + +static int tegra_xudc_ep_disable(struct usb_ep *usb_ep) +{ + struct tegra_xudc_ep *ep; + struct tegra_xudc *xudc; + unsigned long flags; + int ret; + + if (!usb_ep) + return -EINVAL; + + ep = to_xudc_ep(usb_ep); + xudc = ep->xudc; + + spin_lock_irqsave(&xudc->lock, flags); + if (xudc->powergated) { + ret = -ESHUTDOWN; + goto unlock; + } + + ret = __tegra_xudc_ep_disable(ep); +unlock: + spin_unlock_irqrestore(&xudc->lock, flags); + + return ret; +} + +static int __tegra_xudc_ep_enable(struct tegra_xudc_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + struct tegra_xudc *xudc = ep->xudc; + unsigned int i; + u32 val; + + if (xudc->gadget.speed == USB_SPEED_SUPER && + !usb_endpoint_xfer_control(desc) && !ep->usb_ep.comp_desc) + return -EINVAL; + + /* Disable the EP if it is not disabled */ + if (ep_ctx_read_state(ep->context) != EP_STATE_DISABLED) + __tegra_xudc_ep_disable(ep); + + ep->desc = desc; + ep->comp_desc = ep->usb_ep.comp_desc; + + if (usb_endpoint_xfer_isoc(desc)) { + if (xudc->nr_isoch_eps > XUDC_MAX_ISOCH_EPS) { + dev_err(xudc->dev, "too many isochronous endpoints\n"); + return -EBUSY; + } + xudc->nr_isoch_eps++; + } + + memset(ep->transfer_ring, 0, XUDC_TRANSFER_RING_SIZE * + sizeof(*ep->transfer_ring)); + setup_link_trb(ep, &ep->transfer_ring[XUDC_TRANSFER_RING_SIZE - 1]); + + ep->enq_ptr = 0; + ep->deq_ptr = 0; + ep->pcs = true; + ep->ring_full = false; + xudc->nr_enabled_eps++; + + tegra_xudc_ep_context_setup(ep); + + /* + * No need to reload and un-halt EP0. This will be done automatically + * once a valid SETUP packet is received. + */ + if (usb_endpoint_xfer_control(desc)) + goto out; + + /* + * Transition to configured state once the first non-control + * endpoint is enabled. + */ + if (xudc->device_state == USB_STATE_ADDRESS) { + val = xudc_readl(xudc, CTRL); + val |= CTRL_RUN; + xudc_writel(xudc, val, CTRL); + + xudc->device_state = USB_STATE_CONFIGURED; + usb_gadget_set_state(&xudc->gadget, xudc->device_state); + } + + if (usb_endpoint_xfer_isoc(desc)) { + /* + * Pause all bulk endpoints when enabling an isoch endpoint + * to ensure the isoch endpoint is allocated enough bandwidth. + */ + for (i = 0; i < ARRAY_SIZE(xudc->ep); i++) { + if (xudc->ep[i].desc && + usb_endpoint_xfer_bulk(xudc->ep[i].desc)) + ep_pause(xudc, i); + } + } + + ep_reload(xudc, ep->index); + ep_unpause(xudc, ep->index); + ep_unhalt(xudc, ep->index); + + if (usb_endpoint_xfer_isoc(desc)) { + for (i = 0; i < ARRAY_SIZE(xudc->ep); i++) { + if (xudc->ep[i].desc && + usb_endpoint_xfer_bulk(xudc->ep[i].desc)) + ep_unpause(xudc, i); + } + } + +out: + dev_info(xudc->dev, "EP %u (type: %s, dir: %s) enabled\n", ep->index, + usb_ep_type_string(usb_endpoint_type(ep->desc)), + usb_endpoint_dir_in(ep->desc) ? "in" : "out"); + + return 0; +} + +static int tegra_xudc_ep_enable(struct usb_ep *usb_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct tegra_xudc_ep *ep; + struct tegra_xudc *xudc; + unsigned long flags; + int ret; + + if (!usb_ep || !desc || (desc->bDescriptorType != USB_DT_ENDPOINT)) + return -EINVAL; + + ep = to_xudc_ep(usb_ep); + xudc = ep->xudc; + + spin_lock_irqsave(&xudc->lock, flags); + if (xudc->powergated) { + ret = -ESHUTDOWN; + goto unlock; + } + + ret = __tegra_xudc_ep_enable(ep, desc); +unlock: + spin_unlock_irqrestore(&xudc->lock, flags); + + return ret; +} + +static struct usb_request * +tegra_xudc_ep_alloc_request(struct usb_ep *usb_ep, gfp_t gfp) +{ + struct tegra_xudc_request *req; + + req = kzalloc(sizeof(*req), gfp); + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->list); + + return &req->usb_req; +} + +static void tegra_xudc_ep_free_request(struct usb_ep *usb_ep, + struct usb_request *usb_req) +{ + struct tegra_xudc_request *req = to_xudc_req(usb_req); + + kfree(req); +} + +static const struct usb_ep_ops tegra_xudc_ep_ops = { + .enable = tegra_xudc_ep_enable, + .disable = tegra_xudc_ep_disable, + .alloc_request = tegra_xudc_ep_alloc_request, + .free_request = tegra_xudc_ep_free_request, + .queue = tegra_xudc_ep_queue, + .dequeue = tegra_xudc_ep_dequeue, + .set_halt = tegra_xudc_ep_set_halt, +}; + +static int tegra_xudc_ep0_enable(struct usb_ep *usb_ep, + const struct usb_endpoint_descriptor *desc) +{ + return -EBUSY; +} + +static int tegra_xudc_ep0_disable(struct usb_ep *usb_ep) +{ + return -EBUSY; +} + +static const struct usb_ep_ops tegra_xudc_ep0_ops = { + .enable = tegra_xudc_ep0_enable, + .disable = tegra_xudc_ep0_disable, + .alloc_request = tegra_xudc_ep_alloc_request, + .free_request = tegra_xudc_ep_free_request, + .queue = tegra_xudc_ep_queue, + .dequeue = tegra_xudc_ep_dequeue, + .set_halt = tegra_xudc_ep_set_halt, +}; + +static int tegra_xudc_gadget_get_frame(struct usb_gadget *gadget) +{ + struct tegra_xudc *xudc = to_xudc(gadget); + unsigned long flags; + int ret; + + spin_lock_irqsave(&xudc->lock, flags); + if (xudc->powergated) { + ret = -ESHUTDOWN; + goto unlock; + } + + ret = (xudc_readl(xudc, MFINDEX) & MFINDEX_FRAME_MASK) >> + MFINDEX_FRAME_SHIFT; +unlock: + spin_unlock_irqrestore(&xudc->lock, flags); + + return ret; +} + +static void tegra_xudc_resume_device_state(struct tegra_xudc *xudc) +{ + unsigned int i; + u32 val; + + ep_unpause_all(xudc); + + /* Direct link to U0. */ + val = xudc_readl(xudc, PORTSC); + if (((val & PORTSC_PLS_MASK) >> PORTSC_PLS_SHIFT) != PORTSC_PLS_U0) { + val &= ~(PORTSC_CHANGE_MASK | PORTSC_PLS_MASK); + val |= PORTSC_LWS | PORTSC_PLS(PORTSC_PLS_U0); + xudc_writel(xudc, val, PORTSC); + } + + if (xudc->device_state == USB_STATE_SUSPENDED) { + xudc->device_state = xudc->resume_state; + usb_gadget_set_state(&xudc->gadget, xudc->device_state); + xudc->resume_state = 0; + } + + /* + * Doorbells may be dropped if they are sent too soon (< ~200ns) + * after unpausing the endpoint. Wait for 500ns just to be safe. + */ + ndelay(500); + for (i = 0; i < ARRAY_SIZE(xudc->ep); i++) + tegra_xudc_ep_ring_doorbell(&xudc->ep[i]); +} + +static int tegra_xudc_gadget_wakeup(struct usb_gadget *gadget) +{ + struct tegra_xudc *xudc = to_xudc(gadget); + unsigned long flags; + int ret = 0; + u32 val; + + spin_lock_irqsave(&xudc->lock, flags); + + if (xudc->powergated) { + ret = -ESHUTDOWN; + goto unlock; + } + val = xudc_readl(xudc, PORTPM); + dev_dbg(xudc->dev, "%s: PORTPM=%#x, speed=%x\n", __func__, + val, gadget->speed); + + if (((xudc->gadget.speed <= USB_SPEED_HIGH) && + (val & PORTPM_RWE)) || + ((xudc->gadget.speed == USB_SPEED_SUPER) && + (val & PORTPM_FRWE))) { + tegra_xudc_resume_device_state(xudc); + + /* Send Device Notification packet. */ + if (xudc->gadget.speed == USB_SPEED_SUPER) { + val = DEVNOTIF_LO_TYPE(DEVNOTIF_LO_TYPE_FUNCTION_WAKE) + | DEVNOTIF_LO_TRIG; + xudc_writel(xudc, 0, DEVNOTIF_HI); + xudc_writel(xudc, val, DEVNOTIF_LO); + } + } + +unlock: + dev_dbg(xudc->dev, "%s: ret value is %d", __func__, ret); + spin_unlock_irqrestore(&xudc->lock, flags); + + return ret; +} + +static int tegra_xudc_gadget_pullup(struct usb_gadget *gadget, int is_on) +{ + struct tegra_xudc *xudc = to_xudc(gadget); + unsigned long flags; + u32 val; + + pm_runtime_get_sync(xudc->dev); + + spin_lock_irqsave(&xudc->lock, flags); + + if (is_on != xudc->pullup) { + val = xudc_readl(xudc, CTRL); + if (is_on) + val |= CTRL_ENABLE; + else + val &= ~CTRL_ENABLE; + xudc_writel(xudc, val, CTRL); + } + + xudc->pullup = is_on; + dev_dbg(xudc->dev, "%s: pullup:%d", __func__, is_on); + + spin_unlock_irqrestore(&xudc->lock, flags); + + pm_runtime_put(xudc->dev); + + return 0; +} + +static int tegra_xudc_gadget_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct tegra_xudc *xudc = to_xudc(gadget); + unsigned long flags; + u32 val; + int ret; + unsigned int i; + + if (!driver) + return -EINVAL; + + pm_runtime_get_sync(xudc->dev); + + spin_lock_irqsave(&xudc->lock, flags); + + if (xudc->driver) { + ret = -EBUSY; + goto unlock; + } + + xudc->setup_state = WAIT_FOR_SETUP; + xudc->device_state = USB_STATE_DEFAULT; + usb_gadget_set_state(&xudc->gadget, xudc->device_state); + + ret = __tegra_xudc_ep_enable(&xudc->ep[0], &tegra_xudc_ep0_desc); + if (ret < 0) + goto unlock; + + val = xudc_readl(xudc, CTRL); + val |= CTRL_IE | CTRL_LSE; + xudc_writel(xudc, val, CTRL); + + val = xudc_readl(xudc, PORTHALT); + val |= PORTHALT_STCHG_INTR_EN; + xudc_writel(xudc, val, PORTHALT); + + if (xudc->pullup) { + val = xudc_readl(xudc, CTRL); + val |= CTRL_ENABLE; + xudc_writel(xudc, val, CTRL); + } + + for (i = 0; i < xudc->soc->num_phys; i++) + if (xudc->usbphy[i]) + otg_set_peripheral(xudc->usbphy[i]->otg, gadget); + + xudc->driver = driver; +unlock: + dev_dbg(xudc->dev, "%s: ret value is %d", __func__, ret); + spin_unlock_irqrestore(&xudc->lock, flags); + + pm_runtime_put(xudc->dev); + + return ret; +} + +static int tegra_xudc_gadget_stop(struct usb_gadget *gadget) +{ + struct tegra_xudc *xudc = to_xudc(gadget); + unsigned long flags; + u32 val; + unsigned int i; + + pm_runtime_get_sync(xudc->dev); + + spin_lock_irqsave(&xudc->lock, flags); + + for (i = 0; i < xudc->soc->num_phys; i++) + if (xudc->usbphy[i]) + otg_set_peripheral(xudc->usbphy[i]->otg, NULL); + + val = xudc_readl(xudc, CTRL); + val &= ~(CTRL_IE | CTRL_ENABLE); + xudc_writel(xudc, val, CTRL); + + __tegra_xudc_ep_disable(&xudc->ep[0]); + + xudc->driver = NULL; + dev_dbg(xudc->dev, "Gadget stopped"); + + spin_unlock_irqrestore(&xudc->lock, flags); + + pm_runtime_put(xudc->dev); + + return 0; +} + +static int tegra_xudc_gadget_vbus_draw(struct usb_gadget *gadget, + unsigned int m_a) +{ + int ret = 0; + struct tegra_xudc *xudc = to_xudc(gadget); + + dev_dbg(xudc->dev, "%s: %u mA\n", __func__, m_a); + + if (xudc->curr_usbphy && xudc->curr_usbphy->chg_type == SDP_TYPE) + ret = usb_phy_set_power(xudc->curr_usbphy, m_a); + + return ret; +} + +static int tegra_xudc_set_selfpowered(struct usb_gadget *gadget, int is_on) +{ + struct tegra_xudc *xudc = to_xudc(gadget); + + dev_dbg(xudc->dev, "%s: %d\n", __func__, is_on); + xudc->selfpowered = !!is_on; + + return 0; +} + +static const struct usb_gadget_ops tegra_xudc_gadget_ops = { + .get_frame = tegra_xudc_gadget_get_frame, + .wakeup = tegra_xudc_gadget_wakeup, + .pullup = tegra_xudc_gadget_pullup, + .udc_start = tegra_xudc_gadget_start, + .udc_stop = tegra_xudc_gadget_stop, + .vbus_draw = tegra_xudc_gadget_vbus_draw, + .set_selfpowered = tegra_xudc_set_selfpowered, +}; + +static void no_op_complete(struct usb_ep *ep, struct usb_request *req) +{ +} + +static int +tegra_xudc_ep0_queue_status(struct tegra_xudc *xudc, + void (*cmpl)(struct usb_ep *, struct usb_request *)) +{ + xudc->ep0_req->usb_req.buf = NULL; + xudc->ep0_req->usb_req.dma = 0; + xudc->ep0_req->usb_req.length = 0; + xudc->ep0_req->usb_req.complete = cmpl; + xudc->ep0_req->usb_req.context = xudc; + + return __tegra_xudc_ep_queue(&xudc->ep[0], xudc->ep0_req); +} + +static int +tegra_xudc_ep0_queue_data(struct tegra_xudc *xudc, void *buf, size_t len, + void (*cmpl)(struct usb_ep *, struct usb_request *)) +{ + xudc->ep0_req->usb_req.buf = buf; + xudc->ep0_req->usb_req.length = len; + xudc->ep0_req->usb_req.complete = cmpl; + xudc->ep0_req->usb_req.context = xudc; + + return __tegra_xudc_ep_queue(&xudc->ep[0], xudc->ep0_req); +} + +static void tegra_xudc_ep0_req_done(struct tegra_xudc *xudc) +{ + switch (xudc->setup_state) { + case DATA_STAGE_XFER: + xudc->setup_state = STATUS_STAGE_RECV; + tegra_xudc_ep0_queue_status(xudc, no_op_complete); + break; + case DATA_STAGE_RECV: + xudc->setup_state = STATUS_STAGE_XFER; + tegra_xudc_ep0_queue_status(xudc, no_op_complete); + break; + default: + xudc->setup_state = WAIT_FOR_SETUP; + break; + } +} + +static int tegra_xudc_ep0_delegate_req(struct tegra_xudc *xudc, + struct usb_ctrlrequest *ctrl) +{ + int ret; + + spin_unlock(&xudc->lock); + ret = xudc->driver->setup(&xudc->gadget, ctrl); + spin_lock(&xudc->lock); + + return ret; +} + +static void set_feature_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct tegra_xudc *xudc = req->context; + + if (xudc->test_mode_pattern) { + xudc_writel(xudc, xudc->test_mode_pattern, PORT_TM); + xudc->test_mode_pattern = 0; + } +} + +static int tegra_xudc_ep0_set_feature(struct tegra_xudc *xudc, + struct usb_ctrlrequest *ctrl) +{ + bool set = (ctrl->bRequest == USB_REQ_SET_FEATURE); + u32 feature = le16_to_cpu(ctrl->wValue); + u32 index = le16_to_cpu(ctrl->wIndex); + u32 val, ep; + int ret; + + if (le16_to_cpu(ctrl->wLength) != 0) + return -EINVAL; + + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + switch (feature) { + case USB_DEVICE_REMOTE_WAKEUP: + if ((xudc->gadget.speed == USB_SPEED_SUPER) || + (xudc->device_state == USB_STATE_DEFAULT)) + return -EINVAL; + + val = xudc_readl(xudc, PORTPM); + if (set) + val |= PORTPM_RWE; + else + val &= ~PORTPM_RWE; + + xudc_writel(xudc, val, PORTPM); + break; + case USB_DEVICE_U1_ENABLE: + case USB_DEVICE_U2_ENABLE: + if ((xudc->device_state != USB_STATE_CONFIGURED) || + (xudc->gadget.speed != USB_SPEED_SUPER)) + return -EINVAL; + + val = xudc_readl(xudc, PORTPM); + if ((feature == USB_DEVICE_U1_ENABLE) && + xudc->soc->u1_enable) { + if (set) + val |= PORTPM_U1E; + else + val &= ~PORTPM_U1E; + } + + if ((feature == USB_DEVICE_U2_ENABLE) && + xudc->soc->u2_enable) { + if (set) + val |= PORTPM_U2E; + else + val &= ~PORTPM_U2E; + } + + xudc_writel(xudc, val, PORTPM); + break; + case USB_DEVICE_TEST_MODE: + if (xudc->gadget.speed != USB_SPEED_HIGH) + return -EINVAL; + + if (!set) + return -EINVAL; + + xudc->test_mode_pattern = index >> 8; + break; + default: + return -EINVAL; + } + + break; + case USB_RECIP_INTERFACE: + if (xudc->device_state != USB_STATE_CONFIGURED) + return -EINVAL; + + switch (feature) { + case USB_INTRF_FUNC_SUSPEND: + if (set) { + val = xudc_readl(xudc, PORTPM); + + if (index & USB_INTRF_FUNC_SUSPEND_RW) + val |= PORTPM_FRWE; + else + val &= ~PORTPM_FRWE; + + xudc_writel(xudc, val, PORTPM); + } + + return tegra_xudc_ep0_delegate_req(xudc, ctrl); + default: + return -EINVAL; + } + + break; + case USB_RECIP_ENDPOINT: + ep = (index & USB_ENDPOINT_NUMBER_MASK) * 2 + + ((index & USB_DIR_IN) ? 1 : 0); + + if ((xudc->device_state == USB_STATE_DEFAULT) || + ((xudc->device_state == USB_STATE_ADDRESS) && + (index != 0))) + return -EINVAL; + + ret = __tegra_xudc_ep_set_halt(&xudc->ep[ep], set); + if (ret < 0) + return ret; + break; + default: + return -EINVAL; + } + + return tegra_xudc_ep0_queue_status(xudc, set_feature_complete); +} + +static int tegra_xudc_ep0_get_status(struct tegra_xudc *xudc, + struct usb_ctrlrequest *ctrl) +{ + struct tegra_xudc_ep_context *ep_ctx; + u32 val, ep, index = le16_to_cpu(ctrl->wIndex); + u16 status = 0; + + if (!(ctrl->bRequestType & USB_DIR_IN)) + return -EINVAL; + + if ((le16_to_cpu(ctrl->wValue) != 0) || + (le16_to_cpu(ctrl->wLength) != 2)) + return -EINVAL; + + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + val = xudc_readl(xudc, PORTPM); + + if (xudc->selfpowered) + status |= BIT(USB_DEVICE_SELF_POWERED); + + if ((xudc->gadget.speed < USB_SPEED_SUPER) && + (val & PORTPM_RWE)) + status |= BIT(USB_DEVICE_REMOTE_WAKEUP); + + if (xudc->gadget.speed == USB_SPEED_SUPER) { + if (val & PORTPM_U1E) + status |= BIT(USB_DEV_STAT_U1_ENABLED); + if (val & PORTPM_U2E) + status |= BIT(USB_DEV_STAT_U2_ENABLED); + } + break; + case USB_RECIP_INTERFACE: + if (xudc->gadget.speed == USB_SPEED_SUPER) { + status |= USB_INTRF_STAT_FUNC_RW_CAP; + val = xudc_readl(xudc, PORTPM); + if (val & PORTPM_FRWE) + status |= USB_INTRF_STAT_FUNC_RW; + } + break; + case USB_RECIP_ENDPOINT: + ep = (index & USB_ENDPOINT_NUMBER_MASK) * 2 + + ((index & USB_DIR_IN) ? 1 : 0); + ep_ctx = &xudc->ep_context[ep]; + + if ((xudc->device_state != USB_STATE_CONFIGURED) && + ((xudc->device_state != USB_STATE_ADDRESS) || (ep != 0))) + return -EINVAL; + + if (ep_ctx_read_state(ep_ctx) == EP_STATE_DISABLED) + return -EINVAL; + + if (xudc_readl(xudc, EP_HALT) & BIT(ep)) + status |= BIT(USB_ENDPOINT_HALT); + break; + default: + return -EINVAL; + } + + xudc->status_buf = cpu_to_le16(status); + return tegra_xudc_ep0_queue_data(xudc, &xudc->status_buf, + sizeof(xudc->status_buf), + no_op_complete); +} + +static void set_sel_complete(struct usb_ep *ep, struct usb_request *req) +{ + /* Nothing to do with SEL values */ +} + +static int tegra_xudc_ep0_set_sel(struct tegra_xudc *xudc, + struct usb_ctrlrequest *ctrl) +{ + if (ctrl->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE | + USB_TYPE_STANDARD)) + return -EINVAL; + + if (xudc->device_state == USB_STATE_DEFAULT) + return -EINVAL; + + if ((le16_to_cpu(ctrl->wIndex) != 0) || + (le16_to_cpu(ctrl->wValue) != 0) || + (le16_to_cpu(ctrl->wLength) != 6)) + return -EINVAL; + + return tegra_xudc_ep0_queue_data(xudc, &xudc->sel_timing, + sizeof(xudc->sel_timing), + set_sel_complete); +} + +static void set_isoch_delay_complete(struct usb_ep *ep, struct usb_request *req) +{ + /* Nothing to do with isoch delay */ +} + +static int tegra_xudc_ep0_set_isoch_delay(struct tegra_xudc *xudc, + struct usb_ctrlrequest *ctrl) +{ + u32 delay = le16_to_cpu(ctrl->wValue); + + if (ctrl->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE | + USB_TYPE_STANDARD)) + return -EINVAL; + + if ((delay > 65535) || (le16_to_cpu(ctrl->wIndex) != 0) || + (le16_to_cpu(ctrl->wLength) != 0)) + return -EINVAL; + + xudc->isoch_delay = delay; + + return tegra_xudc_ep0_queue_status(xudc, set_isoch_delay_complete); +} + +static void set_address_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct tegra_xudc *xudc = req->context; + + if ((xudc->device_state == USB_STATE_DEFAULT) && + (xudc->dev_addr != 0)) { + xudc->device_state = USB_STATE_ADDRESS; + usb_gadget_set_state(&xudc->gadget, xudc->device_state); + } else if ((xudc->device_state == USB_STATE_ADDRESS) && + (xudc->dev_addr == 0)) { + xudc->device_state = USB_STATE_DEFAULT; + usb_gadget_set_state(&xudc->gadget, xudc->device_state); + } +} + +static int tegra_xudc_ep0_set_address(struct tegra_xudc *xudc, + struct usb_ctrlrequest *ctrl) +{ + struct tegra_xudc_ep *ep0 = &xudc->ep[0]; + u32 val, addr = le16_to_cpu(ctrl->wValue); + + if (ctrl->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE | + USB_TYPE_STANDARD)) + return -EINVAL; + + if ((addr > 127) || (le16_to_cpu(ctrl->wIndex) != 0) || + (le16_to_cpu(ctrl->wLength) != 0)) + return -EINVAL; + + if (xudc->device_state == USB_STATE_CONFIGURED) + return -EINVAL; + + dev_dbg(xudc->dev, "set address: %u\n", addr); + + xudc->dev_addr = addr; + val = xudc_readl(xudc, CTRL); + val &= ~(CTRL_DEVADDR_MASK); + val |= CTRL_DEVADDR(addr); + xudc_writel(xudc, val, CTRL); + + ep_ctx_write_devaddr(ep0->context, addr); + + return tegra_xudc_ep0_queue_status(xudc, set_address_complete); +} + +static int tegra_xudc_ep0_standard_req(struct tegra_xudc *xudc, + struct usb_ctrlrequest *ctrl) +{ + int ret; + + switch (ctrl->bRequest) { + case USB_REQ_GET_STATUS: + dev_dbg(xudc->dev, "USB_REQ_GET_STATUS\n"); + ret = tegra_xudc_ep0_get_status(xudc, ctrl); + break; + case USB_REQ_SET_ADDRESS: + dev_dbg(xudc->dev, "USB_REQ_SET_ADDRESS\n"); + ret = tegra_xudc_ep0_set_address(xudc, ctrl); + break; + case USB_REQ_SET_SEL: + dev_dbg(xudc->dev, "USB_REQ_SET_SEL\n"); + ret = tegra_xudc_ep0_set_sel(xudc, ctrl); + break; + case USB_REQ_SET_ISOCH_DELAY: + dev_dbg(xudc->dev, "USB_REQ_SET_ISOCH_DELAY\n"); + ret = tegra_xudc_ep0_set_isoch_delay(xudc, ctrl); + break; + case USB_REQ_CLEAR_FEATURE: + case USB_REQ_SET_FEATURE: + dev_dbg(xudc->dev, "USB_REQ_CLEAR/SET_FEATURE\n"); + ret = tegra_xudc_ep0_set_feature(xudc, ctrl); + break; + case USB_REQ_SET_CONFIGURATION: + dev_dbg(xudc->dev, "USB_REQ_SET_CONFIGURATION\n"); + /* + * In theory we need to clear RUN bit before status stage of + * deconfig request sent, but this seems to be causing problems. + * Clear RUN once all endpoints are disabled instead. + */ + fallthrough; + default: + ret = tegra_xudc_ep0_delegate_req(xudc, ctrl); + break; + } + + return ret; +} + +static void tegra_xudc_handle_ep0_setup_packet(struct tegra_xudc *xudc, + struct usb_ctrlrequest *ctrl, + u16 seq_num) +{ + int ret; + + xudc->setup_seq_num = seq_num; + + /* Ensure EP0 is unhalted. */ + ep_unhalt(xudc, 0); + + /* + * On Tegra210, setup packets with sequence numbers 0xfffe or 0xffff + * are invalid. Halt EP0 until we get a valid packet. + */ + if (xudc->soc->invalid_seq_num && + (seq_num == 0xfffe || seq_num == 0xffff)) { + dev_warn(xudc->dev, "invalid sequence number detected\n"); + ep_halt(xudc, 0); + return; + } + + if (ctrl->wLength) + xudc->setup_state = (ctrl->bRequestType & USB_DIR_IN) ? + DATA_STAGE_XFER : DATA_STAGE_RECV; + else + xudc->setup_state = STATUS_STAGE_XFER; + + if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) + ret = tegra_xudc_ep0_standard_req(xudc, ctrl); + else + ret = tegra_xudc_ep0_delegate_req(xudc, ctrl); + + if (ret < 0) { + dev_warn(xudc->dev, "setup request failed: %d\n", ret); + xudc->setup_state = WAIT_FOR_SETUP; + ep_halt(xudc, 0); + } +} + +static void tegra_xudc_handle_ep0_event(struct tegra_xudc *xudc, + struct tegra_xudc_trb *event) +{ + struct usb_ctrlrequest *ctrl = (struct usb_ctrlrequest *)event; + u16 seq_num = trb_read_seq_num(event); + + if (xudc->setup_state != WAIT_FOR_SETUP) { + /* + * The controller is in the process of handling another + * setup request. Queue subsequent requests and handle + * the last one once the controller reports a sequence + * number error. + */ + memcpy(&xudc->setup_packet.ctrl_req, ctrl, sizeof(*ctrl)); + xudc->setup_packet.seq_num = seq_num; + xudc->queued_setup_packet = true; + } else { + tegra_xudc_handle_ep0_setup_packet(xudc, ctrl, seq_num); + } +} + +static struct tegra_xudc_request * +trb_to_request(struct tegra_xudc_ep *ep, struct tegra_xudc_trb *trb) +{ + struct tegra_xudc_request *req; + + list_for_each_entry(req, &ep->queue, list) { + if (!req->trbs_queued) + break; + + if (trb_in_request(ep, req, trb)) + return req; + } + + return NULL; +} + +static void tegra_xudc_handle_transfer_completion(struct tegra_xudc *xudc, + struct tegra_xudc_ep *ep, + struct tegra_xudc_trb *event) +{ + struct tegra_xudc_request *req; + struct tegra_xudc_trb *trb; + bool short_packet; + + short_packet = (trb_read_cmpl_code(event) == + TRB_CMPL_CODE_SHORT_PACKET); + + trb = trb_phys_to_virt(ep, trb_read_data_ptr(event)); + req = trb_to_request(ep, trb); + + /* + * TDs are complete on short packet or when the completed TRB is the + * last TRB in the TD (the CHAIN bit is unset). + */ + if (req && (short_packet || (!trb_read_chain(trb) && + (req->trbs_needed == req->trbs_queued)))) { + struct tegra_xudc_trb *last = req->last_trb; + unsigned int residual; + + residual = trb_read_transfer_len(event); + req->usb_req.actual = req->usb_req.length - residual; + + dev_dbg(xudc->dev, "bytes transferred %u / %u\n", + req->usb_req.actual, req->usb_req.length); + + tegra_xudc_req_done(ep, req, 0); + + if (ep->desc && usb_endpoint_xfer_control(ep->desc)) + tegra_xudc_ep0_req_done(xudc); + + /* + * Advance the dequeue pointer past the end of the current TD + * on short packet completion. + */ + if (short_packet) { + ep->deq_ptr = (last - ep->transfer_ring) + 1; + if (ep->deq_ptr == XUDC_TRANSFER_RING_SIZE - 1) + ep->deq_ptr = 0; + } + } else if (!req) { + dev_warn(xudc->dev, "transfer event on dequeued request\n"); + } + + if (ep->desc) + tegra_xudc_ep_kick_queue(ep); +} + +static void tegra_xudc_handle_transfer_event(struct tegra_xudc *xudc, + struct tegra_xudc_trb *event) +{ + unsigned int ep_index = trb_read_endpoint_id(event); + struct tegra_xudc_ep *ep = &xudc->ep[ep_index]; + struct tegra_xudc_trb *trb; + u16 comp_code; + + if (ep_ctx_read_state(ep->context) == EP_STATE_DISABLED) { + dev_warn(xudc->dev, "transfer event on disabled EP %u\n", + ep_index); + return; + } + + /* Update transfer ring dequeue pointer. */ + trb = trb_phys_to_virt(ep, trb_read_data_ptr(event)); + comp_code = trb_read_cmpl_code(event); + if (comp_code != TRB_CMPL_CODE_BABBLE_DETECTED_ERR) { + ep->deq_ptr = (trb - ep->transfer_ring) + 1; + + if (ep->deq_ptr == XUDC_TRANSFER_RING_SIZE - 1) + ep->deq_ptr = 0; + ep->ring_full = false; + } + + switch (comp_code) { + case TRB_CMPL_CODE_SUCCESS: + case TRB_CMPL_CODE_SHORT_PACKET: + tegra_xudc_handle_transfer_completion(xudc, ep, event); + break; + case TRB_CMPL_CODE_HOST_REJECTED: + dev_info(xudc->dev, "stream rejected on EP %u\n", ep_index); + + ep->stream_rejected = true; + break; + case TRB_CMPL_CODE_PRIME_PIPE_RECEIVED: + dev_info(xudc->dev, "prime pipe received on EP %u\n", ep_index); + + if (ep->stream_rejected) { + ep->stream_rejected = false; + /* + * An EP is stopped when a stream is rejected. Wait + * for the EP to report that it is stopped and then + * un-stop it. + */ + ep_wait_for_stopped(xudc, ep_index); + } + tegra_xudc_ep_ring_doorbell(ep); + break; + case TRB_CMPL_CODE_BABBLE_DETECTED_ERR: + /* + * Wait for the EP to be stopped so the controller stops + * processing doorbells. + */ + ep_wait_for_stopped(xudc, ep_index); + ep->enq_ptr = ep->deq_ptr; + tegra_xudc_ep_nuke(ep, -EIO); + fallthrough; + case TRB_CMPL_CODE_STREAM_NUMP_ERROR: + case TRB_CMPL_CODE_CTRL_DIR_ERR: + case TRB_CMPL_CODE_INVALID_STREAM_TYPE_ERR: + case TRB_CMPL_CODE_RING_UNDERRUN: + case TRB_CMPL_CODE_RING_OVERRUN: + case TRB_CMPL_CODE_ISOCH_BUFFER_OVERRUN: + case TRB_CMPL_CODE_USB_TRANS_ERR: + case TRB_CMPL_CODE_TRB_ERR: + dev_err(xudc->dev, "completion error %#x on EP %u\n", + comp_code, ep_index); + + ep_halt(xudc, ep_index); + break; + case TRB_CMPL_CODE_CTRL_SEQNUM_ERR: + dev_info(xudc->dev, "sequence number error\n"); + + /* + * Kill any queued control request and skip to the last + * setup packet we received. + */ + tegra_xudc_ep_nuke(ep, -EINVAL); + xudc->setup_state = WAIT_FOR_SETUP; + if (!xudc->queued_setup_packet) + break; + + tegra_xudc_handle_ep0_setup_packet(xudc, + &xudc->setup_packet.ctrl_req, + xudc->setup_packet.seq_num); + xudc->queued_setup_packet = false; + break; + case TRB_CMPL_CODE_STOPPED: + dev_dbg(xudc->dev, "stop completion code on EP %u\n", + ep_index); + + /* Disconnected. */ + tegra_xudc_ep_nuke(ep, -ECONNREFUSED); + break; + default: + dev_dbg(xudc->dev, "completion event %#x on EP %u\n", + comp_code, ep_index); + break; + } +} + +static void tegra_xudc_reset(struct tegra_xudc *xudc) +{ + struct tegra_xudc_ep *ep0 = &xudc->ep[0]; + dma_addr_t deq_ptr; + unsigned int i; + + xudc->setup_state = WAIT_FOR_SETUP; + xudc->device_state = USB_STATE_DEFAULT; + usb_gadget_set_state(&xudc->gadget, xudc->device_state); + + ep_unpause_all(xudc); + + for (i = 0; i < ARRAY_SIZE(xudc->ep); i++) + tegra_xudc_ep_nuke(&xudc->ep[i], -ESHUTDOWN); + + /* + * Reset sequence number and dequeue pointer to flush the transfer + * ring. + */ + ep0->deq_ptr = ep0->enq_ptr; + ep0->ring_full = false; + + xudc->setup_seq_num = 0; + xudc->queued_setup_packet = false; + + ep_ctx_write_rsvd(ep0->context, 0); + ep_ctx_write_partial_td(ep0->context, 0); + ep_ctx_write_splitxstate(ep0->context, 0); + ep_ctx_write_seq_num(ep0->context, 0); + + deq_ptr = trb_virt_to_phys(ep0, &ep0->transfer_ring[ep0->deq_ptr]); + + if (!dma_mapping_error(xudc->dev, deq_ptr)) { + ep_ctx_write_deq_ptr(ep0->context, deq_ptr); + ep_ctx_write_dcs(ep0->context, ep0->pcs); + } + + ep_unhalt_all(xudc); + ep_reload(xudc, 0); + ep_unpause(xudc, 0); +} + +static void tegra_xudc_port_connect(struct tegra_xudc *xudc) +{ + struct tegra_xudc_ep *ep0 = &xudc->ep[0]; + u16 maxpacket; + u32 val; + + val = (xudc_readl(xudc, PORTSC) & PORTSC_PS_MASK) >> PORTSC_PS_SHIFT; + switch (val) { + case PORTSC_PS_LS: + xudc->gadget.speed = USB_SPEED_LOW; + break; + case PORTSC_PS_FS: + xudc->gadget.speed = USB_SPEED_FULL; + break; + case PORTSC_PS_HS: + xudc->gadget.speed = USB_SPEED_HIGH; + break; + case PORTSC_PS_SS: + xudc->gadget.speed = USB_SPEED_SUPER; + break; + default: + xudc->gadget.speed = USB_SPEED_UNKNOWN; + break; + } + + xudc->device_state = USB_STATE_DEFAULT; + usb_gadget_set_state(&xudc->gadget, xudc->device_state); + + xudc->setup_state = WAIT_FOR_SETUP; + + if (xudc->gadget.speed == USB_SPEED_SUPER) + maxpacket = 512; + else + maxpacket = 64; + + ep_ctx_write_max_packet_size(ep0->context, maxpacket); + tegra_xudc_ep0_desc.wMaxPacketSize = cpu_to_le16(maxpacket); + usb_ep_set_maxpacket_limit(&ep0->usb_ep, maxpacket); + + if (!xudc->soc->u1_enable) { + val = xudc_readl(xudc, PORTPM); + val &= ~(PORTPM_U1TIMEOUT_MASK); + xudc_writel(xudc, val, PORTPM); + } + + if (!xudc->soc->u2_enable) { + val = xudc_readl(xudc, PORTPM); + val &= ~(PORTPM_U2TIMEOUT_MASK); + xudc_writel(xudc, val, PORTPM); + } + + if (xudc->gadget.speed <= USB_SPEED_HIGH) { + val = xudc_readl(xudc, PORTPM); + val &= ~(PORTPM_L1S_MASK); + if (xudc->soc->lpm_enable) + val |= PORTPM_L1S(PORTPM_L1S_ACCEPT); + else + val |= PORTPM_L1S(PORTPM_L1S_NYET); + xudc_writel(xudc, val, PORTPM); + } + + val = xudc_readl(xudc, ST); + if (val & ST_RC) + xudc_writel(xudc, ST_RC, ST); +} + +static void tegra_xudc_port_disconnect(struct tegra_xudc *xudc) +{ + tegra_xudc_reset(xudc); + + if (xudc->driver && xudc->driver->disconnect) { + spin_unlock(&xudc->lock); + xudc->driver->disconnect(&xudc->gadget); + spin_lock(&xudc->lock); + } + + xudc->device_state = USB_STATE_NOTATTACHED; + usb_gadget_set_state(&xudc->gadget, xudc->device_state); + + complete(&xudc->disconnect_complete); +} + +static void tegra_xudc_port_reset(struct tegra_xudc *xudc) +{ + tegra_xudc_reset(xudc); + + if (xudc->driver) { + spin_unlock(&xudc->lock); + usb_gadget_udc_reset(&xudc->gadget, xudc->driver); + spin_lock(&xudc->lock); + } + + tegra_xudc_port_connect(xudc); +} + +static void tegra_xudc_port_suspend(struct tegra_xudc *xudc) +{ + dev_dbg(xudc->dev, "port suspend\n"); + + xudc->resume_state = xudc->device_state; + xudc->device_state = USB_STATE_SUSPENDED; + usb_gadget_set_state(&xudc->gadget, xudc->device_state); + + if (xudc->driver->suspend) { + spin_unlock(&xudc->lock); + xudc->driver->suspend(&xudc->gadget); + spin_lock(&xudc->lock); + } +} + +static void tegra_xudc_port_resume(struct tegra_xudc *xudc) +{ + dev_dbg(xudc->dev, "port resume\n"); + + tegra_xudc_resume_device_state(xudc); + + if (xudc->driver->resume) { + spin_unlock(&xudc->lock); + xudc->driver->resume(&xudc->gadget); + spin_lock(&xudc->lock); + } +} + +static inline void clear_port_change(struct tegra_xudc *xudc, u32 flag) +{ + u32 val; + + val = xudc_readl(xudc, PORTSC); + val &= ~PORTSC_CHANGE_MASK; + val |= flag; + xudc_writel(xudc, val, PORTSC); +} + +static void __tegra_xudc_handle_port_status(struct tegra_xudc *xudc) +{ + u32 portsc, porthalt; + + porthalt = xudc_readl(xudc, PORTHALT); + if ((porthalt & PORTHALT_STCHG_REQ) && + (porthalt & PORTHALT_HALT_LTSSM)) { + dev_dbg(xudc->dev, "STCHG_REQ, PORTHALT = %#x\n", porthalt); + porthalt &= ~PORTHALT_HALT_LTSSM; + xudc_writel(xudc, porthalt, PORTHALT); + } + + portsc = xudc_readl(xudc, PORTSC); + if ((portsc & PORTSC_PRC) && (portsc & PORTSC_PR)) { + dev_dbg(xudc->dev, "PRC, PR, PORTSC = %#x\n", portsc); + clear_port_change(xudc, PORTSC_PRC | PORTSC_PED); +#define TOGGLE_VBUS_WAIT_MS 100 + if (xudc->soc->port_reset_quirk) { + schedule_delayed_work(&xudc->port_reset_war_work, + msecs_to_jiffies(TOGGLE_VBUS_WAIT_MS)); + xudc->wait_for_sec_prc = 1; + } + } + + if ((portsc & PORTSC_PRC) && !(portsc & PORTSC_PR)) { + dev_dbg(xudc->dev, "PRC, Not PR, PORTSC = %#x\n", portsc); + clear_port_change(xudc, PORTSC_PRC | PORTSC_PED); + tegra_xudc_port_reset(xudc); + cancel_delayed_work(&xudc->port_reset_war_work); + xudc->wait_for_sec_prc = 0; + } + + portsc = xudc_readl(xudc, PORTSC); + if (portsc & PORTSC_WRC) { + dev_dbg(xudc->dev, "WRC, PORTSC = %#x\n", portsc); + clear_port_change(xudc, PORTSC_WRC | PORTSC_PED); + if (!(xudc_readl(xudc, PORTSC) & PORTSC_WPR)) + tegra_xudc_port_reset(xudc); + } + + portsc = xudc_readl(xudc, PORTSC); + if (portsc & PORTSC_CSC) { + dev_dbg(xudc->dev, "CSC, PORTSC = %#x\n", portsc); + clear_port_change(xudc, PORTSC_CSC); + + if (portsc & PORTSC_CCS) + tegra_xudc_port_connect(xudc); + else + tegra_xudc_port_disconnect(xudc); + + if (xudc->wait_csc) { + cancel_delayed_work(&xudc->plc_reset_work); + xudc->wait_csc = false; + } + } + + portsc = xudc_readl(xudc, PORTSC); + if (portsc & PORTSC_PLC) { + u32 pls = (portsc & PORTSC_PLS_MASK) >> PORTSC_PLS_SHIFT; + + dev_dbg(xudc->dev, "PLC, PORTSC = %#x\n", portsc); + clear_port_change(xudc, PORTSC_PLC); + switch (pls) { + case PORTSC_PLS_U3: + tegra_xudc_port_suspend(xudc); + break; + case PORTSC_PLS_U0: + if (xudc->gadget.speed < USB_SPEED_SUPER) + tegra_xudc_port_resume(xudc); + break; + case PORTSC_PLS_RESUME: + if (xudc->gadget.speed == USB_SPEED_SUPER) + tegra_xudc_port_resume(xudc); + break; + case PORTSC_PLS_INACTIVE: + schedule_delayed_work(&xudc->plc_reset_work, + msecs_to_jiffies(TOGGLE_VBUS_WAIT_MS)); + xudc->wait_csc = true; + break; + default: + break; + } + } + + if (portsc & PORTSC_CEC) { + dev_warn(xudc->dev, "CEC, PORTSC = %#x\n", portsc); + clear_port_change(xudc, PORTSC_CEC); + } + + dev_dbg(xudc->dev, "PORTSC = %#x\n", xudc_readl(xudc, PORTSC)); +} + +static void tegra_xudc_handle_port_status(struct tegra_xudc *xudc) +{ + while ((xudc_readl(xudc, PORTSC) & PORTSC_CHANGE_MASK) || + (xudc_readl(xudc, PORTHALT) & PORTHALT_STCHG_REQ)) + __tegra_xudc_handle_port_status(xudc); +} + +static void tegra_xudc_handle_event(struct tegra_xudc *xudc, + struct tegra_xudc_trb *event) +{ + u32 type = trb_read_type(event); + + dump_trb(xudc, "EVENT", event); + + switch (type) { + case TRB_TYPE_PORT_STATUS_CHANGE_EVENT: + tegra_xudc_handle_port_status(xudc); + break; + case TRB_TYPE_TRANSFER_EVENT: + tegra_xudc_handle_transfer_event(xudc, event); + break; + case TRB_TYPE_SETUP_PACKET_EVENT: + tegra_xudc_handle_ep0_event(xudc, event); + break; + default: + dev_info(xudc->dev, "Unrecognized TRB type = %#x\n", type); + break; + } +} + +static void tegra_xudc_process_event_ring(struct tegra_xudc *xudc) +{ + struct tegra_xudc_trb *event; + dma_addr_t erdp; + + while (true) { + event = xudc->event_ring[xudc->event_ring_index] + + xudc->event_ring_deq_ptr; + + if (trb_read_cycle(event) != xudc->ccs) + break; + + tegra_xudc_handle_event(xudc, event); + + xudc->event_ring_deq_ptr++; + if (xudc->event_ring_deq_ptr == XUDC_EVENT_RING_SIZE) { + xudc->event_ring_deq_ptr = 0; + xudc->event_ring_index++; + } + + if (xudc->event_ring_index == XUDC_NR_EVENT_RINGS) { + xudc->event_ring_index = 0; + xudc->ccs = !xudc->ccs; + } + } + + erdp = xudc->event_ring_phys[xudc->event_ring_index] + + xudc->event_ring_deq_ptr * sizeof(*event); + + xudc_writel(xudc, upper_32_bits(erdp), ERDPHI); + xudc_writel(xudc, lower_32_bits(erdp) | ERDPLO_EHB, ERDPLO); +} + +static irqreturn_t tegra_xudc_irq(int irq, void *data) +{ + struct tegra_xudc *xudc = data; + unsigned long flags; + u32 val; + + val = xudc_readl(xudc, ST); + if (!(val & ST_IP)) + return IRQ_NONE; + xudc_writel(xudc, ST_IP, ST); + + spin_lock_irqsave(&xudc->lock, flags); + tegra_xudc_process_event_ring(xudc); + spin_unlock_irqrestore(&xudc->lock, flags); + + return IRQ_HANDLED; +} + +static int tegra_xudc_alloc_ep(struct tegra_xudc *xudc, unsigned int index) +{ + struct tegra_xudc_ep *ep = &xudc->ep[index]; + + ep->xudc = xudc; + ep->index = index; + ep->context = &xudc->ep_context[index]; + INIT_LIST_HEAD(&ep->queue); + + /* + * EP1 would be the input endpoint corresponding to EP0, but since + * EP0 is bi-directional, EP1 is unused. + */ + if (index == 1) + return 0; + + ep->transfer_ring = dma_pool_alloc(xudc->transfer_ring_pool, + GFP_KERNEL, + &ep->transfer_ring_phys); + if (!ep->transfer_ring) + return -ENOMEM; + + if (index) { + snprintf(ep->name, sizeof(ep->name), "ep%u%s", index / 2, + (index % 2 == 0) ? "out" : "in"); + ep->usb_ep.name = ep->name; + usb_ep_set_maxpacket_limit(&ep->usb_ep, 1024); + ep->usb_ep.max_streams = 16; + ep->usb_ep.ops = &tegra_xudc_ep_ops; + ep->usb_ep.caps.type_bulk = true; + ep->usb_ep.caps.type_int = true; + if (index & 1) + ep->usb_ep.caps.dir_in = true; + else + ep->usb_ep.caps.dir_out = true; + list_add_tail(&ep->usb_ep.ep_list, &xudc->gadget.ep_list); + } else { + strscpy(ep->name, "ep0", 3); + ep->usb_ep.name = ep->name; + usb_ep_set_maxpacket_limit(&ep->usb_ep, 512); + ep->usb_ep.ops = &tegra_xudc_ep0_ops; + ep->usb_ep.caps.type_control = true; + ep->usb_ep.caps.dir_in = true; + ep->usb_ep.caps.dir_out = true; + } + + return 0; +} + +static void tegra_xudc_free_ep(struct tegra_xudc *xudc, unsigned int index) +{ + struct tegra_xudc_ep *ep = &xudc->ep[index]; + + /* + * EP1 would be the input endpoint corresponding to EP0, but since + * EP0 is bi-directional, EP1 is unused. + */ + if (index == 1) + return; + + dma_pool_free(xudc->transfer_ring_pool, ep->transfer_ring, + ep->transfer_ring_phys); +} + +static int tegra_xudc_alloc_eps(struct tegra_xudc *xudc) +{ + struct usb_request *req; + unsigned int i; + int err; + + xudc->ep_context = + dma_alloc_coherent(xudc->dev, XUDC_NR_EPS * + sizeof(*xudc->ep_context), + &xudc->ep_context_phys, GFP_KERNEL); + if (!xudc->ep_context) + return -ENOMEM; + + xudc->transfer_ring_pool = + dmam_pool_create(dev_name(xudc->dev), xudc->dev, + XUDC_TRANSFER_RING_SIZE * + sizeof(struct tegra_xudc_trb), + sizeof(struct tegra_xudc_trb), 0); + if (!xudc->transfer_ring_pool) { + err = -ENOMEM; + goto free_ep_context; + } + + INIT_LIST_HEAD(&xudc->gadget.ep_list); + for (i = 0; i < ARRAY_SIZE(xudc->ep); i++) { + err = tegra_xudc_alloc_ep(xudc, i); + if (err < 0) + goto free_eps; + } + + req = tegra_xudc_ep_alloc_request(&xudc->ep[0].usb_ep, GFP_KERNEL); + if (!req) { + err = -ENOMEM; + goto free_eps; + } + xudc->ep0_req = to_xudc_req(req); + + return 0; + +free_eps: + for (; i > 0; i--) + tegra_xudc_free_ep(xudc, i - 1); +free_ep_context: + dma_free_coherent(xudc->dev, XUDC_NR_EPS * sizeof(*xudc->ep_context), + xudc->ep_context, xudc->ep_context_phys); + return err; +} + +static void tegra_xudc_init_eps(struct tegra_xudc *xudc) +{ + xudc_writel(xudc, lower_32_bits(xudc->ep_context_phys), ECPLO); + xudc_writel(xudc, upper_32_bits(xudc->ep_context_phys), ECPHI); +} + +static void tegra_xudc_free_eps(struct tegra_xudc *xudc) +{ + unsigned int i; + + tegra_xudc_ep_free_request(&xudc->ep[0].usb_ep, + &xudc->ep0_req->usb_req); + + for (i = 0; i < ARRAY_SIZE(xudc->ep); i++) + tegra_xudc_free_ep(xudc, i); + + dma_free_coherent(xudc->dev, XUDC_NR_EPS * sizeof(*xudc->ep_context), + xudc->ep_context, xudc->ep_context_phys); +} + +static int tegra_xudc_alloc_event_ring(struct tegra_xudc *xudc) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(xudc->event_ring); i++) { + xudc->event_ring[i] = + dma_alloc_coherent(xudc->dev, XUDC_EVENT_RING_SIZE * + sizeof(*xudc->event_ring[i]), + &xudc->event_ring_phys[i], + GFP_KERNEL); + if (!xudc->event_ring[i]) + goto free_dma; + } + + return 0; + +free_dma: + for (; i > 0; i--) { + dma_free_coherent(xudc->dev, XUDC_EVENT_RING_SIZE * + sizeof(*xudc->event_ring[i - 1]), + xudc->event_ring[i - 1], + xudc->event_ring_phys[i - 1]); + } + return -ENOMEM; +} + +static void tegra_xudc_init_event_ring(struct tegra_xudc *xudc) +{ + unsigned int i; + u32 val; + + for (i = 0; i < ARRAY_SIZE(xudc->event_ring); i++) { + memset(xudc->event_ring[i], 0, XUDC_EVENT_RING_SIZE * + sizeof(*xudc->event_ring[i])); + + val = xudc_readl(xudc, ERSTSZ); + val &= ~(ERSTSZ_ERSTXSZ_MASK << ERSTSZ_ERSTXSZ_SHIFT(i)); + val |= XUDC_EVENT_RING_SIZE << ERSTSZ_ERSTXSZ_SHIFT(i); + xudc_writel(xudc, val, ERSTSZ); + + xudc_writel(xudc, lower_32_bits(xudc->event_ring_phys[i]), + ERSTXBALO(i)); + xudc_writel(xudc, upper_32_bits(xudc->event_ring_phys[i]), + ERSTXBAHI(i)); + } + + val = lower_32_bits(xudc->event_ring_phys[0]); + xudc_writel(xudc, val, ERDPLO); + val |= EREPLO_ECS; + xudc_writel(xudc, val, EREPLO); + + val = upper_32_bits(xudc->event_ring_phys[0]); + xudc_writel(xudc, val, ERDPHI); + xudc_writel(xudc, val, EREPHI); + + xudc->ccs = true; + xudc->event_ring_index = 0; + xudc->event_ring_deq_ptr = 0; +} + +static void tegra_xudc_free_event_ring(struct tegra_xudc *xudc) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(xudc->event_ring); i++) { + dma_free_coherent(xudc->dev, XUDC_EVENT_RING_SIZE * + sizeof(*xudc->event_ring[i]), + xudc->event_ring[i], + xudc->event_ring_phys[i]); + } +} + +static void tegra_xudc_fpci_ipfs_init(struct tegra_xudc *xudc) +{ + u32 val; + + if (xudc->soc->has_ipfs) { + val = ipfs_readl(xudc, XUSB_DEV_CONFIGURATION_0); + val |= XUSB_DEV_CONFIGURATION_0_EN_FPCI; + ipfs_writel(xudc, val, XUSB_DEV_CONFIGURATION_0); + usleep_range(10, 15); + } + + /* Enable bus master */ + val = XUSB_DEV_CFG_1_IO_SPACE_EN | XUSB_DEV_CFG_1_MEMORY_SPACE_EN | + XUSB_DEV_CFG_1_BUS_MASTER_EN; + fpci_writel(xudc, val, XUSB_DEV_CFG_1); + + /* Program BAR0 space */ + val = fpci_readl(xudc, XUSB_DEV_CFG_4); + val &= ~(XUSB_DEV_CFG_4_BASE_ADDR_MASK); + val |= xudc->phys_base & (XUSB_DEV_CFG_4_BASE_ADDR_MASK); + + fpci_writel(xudc, val, XUSB_DEV_CFG_4); + fpci_writel(xudc, upper_32_bits(xudc->phys_base), XUSB_DEV_CFG_5); + + usleep_range(100, 200); + + if (xudc->soc->has_ipfs) { + /* Enable interrupt assertion */ + val = ipfs_readl(xudc, XUSB_DEV_INTR_MASK_0); + val |= XUSB_DEV_INTR_MASK_0_IP_INT_MASK; + ipfs_writel(xudc, val, XUSB_DEV_INTR_MASK_0); + } +} + +static void tegra_xudc_device_params_init(struct tegra_xudc *xudc) +{ + u32 val, imod; + + if (xudc->soc->has_ipfs) { + val = xudc_readl(xudc, BLCG); + val |= BLCG_ALL; + val &= ~(BLCG_DFPCI | BLCG_UFPCI | BLCG_FE | + BLCG_COREPLL_PWRDN); + val |= BLCG_IOPLL_0_PWRDN; + val |= BLCG_IOPLL_1_PWRDN; + val |= BLCG_IOPLL_2_PWRDN; + + xudc_writel(xudc, val, BLCG); + } + + if (xudc->soc->port_speed_quirk) + tegra_xudc_limit_port_speed(xudc); + + /* Set a reasonable U3 exit timer value. */ + val = xudc_readl(xudc, SSPX_CORE_PADCTL4); + val &= ~(SSPX_CORE_PADCTL4_RXDAT_VLD_TIMEOUT_U3_MASK); + val |= SSPX_CORE_PADCTL4_RXDAT_VLD_TIMEOUT_U3(0x5dc0); + xudc_writel(xudc, val, SSPX_CORE_PADCTL4); + + /* Default ping LFPS tBurst is too large. */ + val = xudc_readl(xudc, SSPX_CORE_CNT0); + val &= ~(SSPX_CORE_CNT0_PING_TBURST_MASK); + val |= SSPX_CORE_CNT0_PING_TBURST(0xa); + xudc_writel(xudc, val, SSPX_CORE_CNT0); + + /* Default tPortConfiguration timeout is too small. */ + val = xudc_readl(xudc, SSPX_CORE_CNT30); + val &= ~(SSPX_CORE_CNT30_LMPITP_TIMER_MASK); + val |= SSPX_CORE_CNT30_LMPITP_TIMER(0x978); + xudc_writel(xudc, val, SSPX_CORE_CNT30); + + if (xudc->soc->lpm_enable) { + /* Set L1 resume duration to 95 us. */ + val = xudc_readl(xudc, HSFSPI_COUNT13); + val &= ~(HSFSPI_COUNT13_U2_RESUME_K_DURATION_MASK); + val |= HSFSPI_COUNT13_U2_RESUME_K_DURATION(0x2c88); + xudc_writel(xudc, val, HSFSPI_COUNT13); + } + + /* + * Compliance suite appears to be violating polling LFPS tBurst max + * of 1.4us. Send 1.45us instead. + */ + val = xudc_readl(xudc, SSPX_CORE_CNT32); + val &= ~(SSPX_CORE_CNT32_POLL_TBURST_MAX_MASK); + val |= SSPX_CORE_CNT32_POLL_TBURST_MAX(0xb0); + xudc_writel(xudc, val, SSPX_CORE_CNT32); + + /* Direct HS/FS port instance to RxDetect. */ + val = xudc_readl(xudc, CFG_DEV_FE); + val &= ~(CFG_DEV_FE_PORTREGSEL_MASK); + val |= CFG_DEV_FE_PORTREGSEL(CFG_DEV_FE_PORTREGSEL_HSFS_PI); + xudc_writel(xudc, val, CFG_DEV_FE); + + val = xudc_readl(xudc, PORTSC); + val &= ~(PORTSC_CHANGE_MASK | PORTSC_PLS_MASK); + val |= PORTSC_LWS | PORTSC_PLS(PORTSC_PLS_RXDETECT); + xudc_writel(xudc, val, PORTSC); + + /* Direct SS port instance to RxDetect. */ + val = xudc_readl(xudc, CFG_DEV_FE); + val &= ~(CFG_DEV_FE_PORTREGSEL_MASK); + val |= CFG_DEV_FE_PORTREGSEL_SS_PI & CFG_DEV_FE_PORTREGSEL_MASK; + xudc_writel(xudc, val, CFG_DEV_FE); + + val = xudc_readl(xudc, PORTSC); + val &= ~(PORTSC_CHANGE_MASK | PORTSC_PLS_MASK); + val |= PORTSC_LWS | PORTSC_PLS(PORTSC_PLS_RXDETECT); + xudc_writel(xudc, val, PORTSC); + + /* Restore port instance. */ + val = xudc_readl(xudc, CFG_DEV_FE); + val &= ~(CFG_DEV_FE_PORTREGSEL_MASK); + xudc_writel(xudc, val, CFG_DEV_FE); + + /* + * Enable INFINITE_SS_RETRY to prevent device from entering + * Disabled.Error when attached to buggy SuperSpeed hubs. + */ + val = xudc_readl(xudc, CFG_DEV_FE); + val |= CFG_DEV_FE_INFINITE_SS_RETRY; + xudc_writel(xudc, val, CFG_DEV_FE); + + /* Set interrupt moderation. */ + imod = XUDC_INTERRUPT_MODERATION_US * 4; + val = xudc_readl(xudc, RT_IMOD); + val &= ~((RT_IMOD_IMODI_MASK) | (RT_IMOD_IMODC_MASK)); + val |= (RT_IMOD_IMODI(imod) | RT_IMOD_IMODC(imod)); + xudc_writel(xudc, val, RT_IMOD); + + /* increase SSPI transaction timeout from 32us to 512us */ + val = xudc_readl(xudc, CFG_DEV_SSPI_XFER); + val &= ~(CFG_DEV_SSPI_XFER_ACKTIMEOUT_MASK); + val |= CFG_DEV_SSPI_XFER_ACKTIMEOUT(0xf000); + xudc_writel(xudc, val, CFG_DEV_SSPI_XFER); +} + +static int tegra_xudc_phy_get(struct tegra_xudc *xudc) +{ + int err = 0, usb3; + unsigned int i; + + xudc->utmi_phy = devm_kcalloc(xudc->dev, xudc->soc->num_phys, + sizeof(*xudc->utmi_phy), GFP_KERNEL); + if (!xudc->utmi_phy) + return -ENOMEM; + + xudc->usb3_phy = devm_kcalloc(xudc->dev, xudc->soc->num_phys, + sizeof(*xudc->usb3_phy), GFP_KERNEL); + if (!xudc->usb3_phy) + return -ENOMEM; + + xudc->usbphy = devm_kcalloc(xudc->dev, xudc->soc->num_phys, + sizeof(*xudc->usbphy), GFP_KERNEL); + if (!xudc->usbphy) + return -ENOMEM; + + xudc->vbus_nb.notifier_call = tegra_xudc_vbus_notify; + + for (i = 0; i < xudc->soc->num_phys; i++) { + char phy_name[] = "usb.-."; + + /* Get USB2 phy */ + snprintf(phy_name, sizeof(phy_name), "usb2-%d", i); + xudc->utmi_phy[i] = devm_phy_optional_get(xudc->dev, phy_name); + if (IS_ERR(xudc->utmi_phy[i])) { + err = PTR_ERR(xudc->utmi_phy[i]); + dev_err_probe(xudc->dev, err, + "failed to get usb2-%d PHY\n", i); + goto clean_up; + } else if (xudc->utmi_phy[i]) { + /* Get usb-phy, if utmi phy is available */ + xudc->usbphy[i] = devm_usb_get_phy_by_node(xudc->dev, + xudc->utmi_phy[i]->dev.of_node, + &xudc->vbus_nb); + if (IS_ERR(xudc->usbphy[i])) { + err = PTR_ERR(xudc->usbphy[i]); + dev_err_probe(xudc->dev, err, + "failed to get usbphy-%d\n", i); + goto clean_up; + } + } else if (!xudc->utmi_phy[i]) { + /* if utmi phy is not available, ignore USB3 phy get */ + continue; + } + + /* Get USB3 phy */ + usb3 = tegra_xusb_padctl_get_usb3_companion(xudc->padctl, i); + if (usb3 < 0) + continue; + + snprintf(phy_name, sizeof(phy_name), "usb3-%d", usb3); + xudc->usb3_phy[i] = devm_phy_optional_get(xudc->dev, phy_name); + if (IS_ERR(xudc->usb3_phy[i])) { + err = PTR_ERR(xudc->usb3_phy[i]); + dev_err_probe(xudc->dev, err, + "failed to get usb3-%d PHY\n", usb3); + goto clean_up; + } else if (xudc->usb3_phy[i]) + dev_dbg(xudc->dev, "usb3-%d PHY registered", usb3); + } + + return err; + +clean_up: + for (i = 0; i < xudc->soc->num_phys; i++) { + xudc->usb3_phy[i] = NULL; + xudc->utmi_phy[i] = NULL; + xudc->usbphy[i] = NULL; + } + + return err; +} + +static void tegra_xudc_phy_exit(struct tegra_xudc *xudc) +{ + unsigned int i; + + for (i = 0; i < xudc->soc->num_phys; i++) { + phy_exit(xudc->usb3_phy[i]); + phy_exit(xudc->utmi_phy[i]); + } +} + +static int tegra_xudc_phy_init(struct tegra_xudc *xudc) +{ + int err; + unsigned int i; + + for (i = 0; i < xudc->soc->num_phys; i++) { + err = phy_init(xudc->utmi_phy[i]); + if (err < 0) { + dev_err(xudc->dev, "UTMI PHY #%u initialization failed: %d\n", i, err); + goto exit_phy; + } + + err = phy_init(xudc->usb3_phy[i]); + if (err < 0) { + dev_err(xudc->dev, "USB3 PHY #%u initialization failed: %d\n", i, err); + goto exit_phy; + } + } + return 0; + +exit_phy: + tegra_xudc_phy_exit(xudc); + return err; +} + +static const char * const tegra210_xudc_supply_names[] = { + "hvdd-usb", + "avddio-usb", +}; + +static const char * const tegra210_xudc_clock_names[] = { + "dev", + "ss", + "ss_src", + "hs_src", + "fs_src", +}; + +static const char * const tegra186_xudc_clock_names[] = { + "dev", + "ss", + "ss_src", + "fs_src", +}; + +static struct tegra_xudc_soc tegra210_xudc_soc_data = { + .supply_names = tegra210_xudc_supply_names, + .num_supplies = ARRAY_SIZE(tegra210_xudc_supply_names), + .clock_names = tegra210_xudc_clock_names, + .num_clks = ARRAY_SIZE(tegra210_xudc_clock_names), + .num_phys = 4, + .u1_enable = false, + .u2_enable = true, + .lpm_enable = false, + .invalid_seq_num = true, + .pls_quirk = true, + .port_reset_quirk = true, + .port_speed_quirk = false, + .has_ipfs = true, +}; + +static struct tegra_xudc_soc tegra186_xudc_soc_data = { + .clock_names = tegra186_xudc_clock_names, + .num_clks = ARRAY_SIZE(tegra186_xudc_clock_names), + .num_phys = 4, + .u1_enable = true, + .u2_enable = true, + .lpm_enable = false, + .invalid_seq_num = false, + .pls_quirk = false, + .port_reset_quirk = false, + .port_speed_quirk = false, + .has_ipfs = false, +}; + +static struct tegra_xudc_soc tegra194_xudc_soc_data = { + .clock_names = tegra186_xudc_clock_names, + .num_clks = ARRAY_SIZE(tegra186_xudc_clock_names), + .num_phys = 4, + .u1_enable = true, + .u2_enable = true, + .lpm_enable = true, + .invalid_seq_num = false, + .pls_quirk = false, + .port_reset_quirk = false, + .port_speed_quirk = true, + .has_ipfs = false, +}; + +static const struct of_device_id tegra_xudc_of_match[] = { + { + .compatible = "nvidia,tegra210-xudc", + .data = &tegra210_xudc_soc_data + }, + { + .compatible = "nvidia,tegra186-xudc", + .data = &tegra186_xudc_soc_data + }, + { + .compatible = "nvidia,tegra194-xudc", + .data = &tegra194_xudc_soc_data + }, + { } +}; +MODULE_DEVICE_TABLE(of, tegra_xudc_of_match); + +static void tegra_xudc_powerdomain_remove(struct tegra_xudc *xudc) +{ + if (xudc->genpd_dl_ss) + device_link_del(xudc->genpd_dl_ss); + if (xudc->genpd_dl_device) + device_link_del(xudc->genpd_dl_device); + if (xudc->genpd_dev_ss) + dev_pm_domain_detach(xudc->genpd_dev_ss, true); + if (xudc->genpd_dev_device) + dev_pm_domain_detach(xudc->genpd_dev_device, true); +} + +static int tegra_xudc_powerdomain_init(struct tegra_xudc *xudc) +{ + struct device *dev = xudc->dev; + int err; + + xudc->genpd_dev_device = dev_pm_domain_attach_by_name(dev, "dev"); + if (IS_ERR(xudc->genpd_dev_device)) { + err = PTR_ERR(xudc->genpd_dev_device); + dev_err(dev, "failed to get device power domain: %d\n", err); + return err; + } + + xudc->genpd_dev_ss = dev_pm_domain_attach_by_name(dev, "ss"); + if (IS_ERR(xudc->genpd_dev_ss)) { + err = PTR_ERR(xudc->genpd_dev_ss); + dev_err(dev, "failed to get SuperSpeed power domain: %d\n", err); + return err; + } + + xudc->genpd_dl_device = device_link_add(dev, xudc->genpd_dev_device, + DL_FLAG_PM_RUNTIME | + DL_FLAG_STATELESS); + if (!xudc->genpd_dl_device) { + dev_err(dev, "failed to add USB device link\n"); + return -ENODEV; + } + + xudc->genpd_dl_ss = device_link_add(dev, xudc->genpd_dev_ss, + DL_FLAG_PM_RUNTIME | + DL_FLAG_STATELESS); + if (!xudc->genpd_dl_ss) { + dev_err(dev, "failed to add SuperSpeed device link\n"); + return -ENODEV; + } + + return 0; +} + +static int tegra_xudc_probe(struct platform_device *pdev) +{ + struct tegra_xudc *xudc; + struct resource *res; + unsigned int i; + int err; + + xudc = devm_kzalloc(&pdev->dev, sizeof(*xudc), GFP_KERNEL); + if (!xudc) + return -ENOMEM; + + xudc->dev = &pdev->dev; + platform_set_drvdata(pdev, xudc); + + xudc->soc = of_device_get_match_data(&pdev->dev); + if (!xudc->soc) + return -ENODEV; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "base"); + xudc->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(xudc->base)) + return PTR_ERR(xudc->base); + xudc->phys_base = res->start; + + xudc->fpci = devm_platform_ioremap_resource_byname(pdev, "fpci"); + if (IS_ERR(xudc->fpci)) + return PTR_ERR(xudc->fpci); + + if (xudc->soc->has_ipfs) { + xudc->ipfs = devm_platform_ioremap_resource_byname(pdev, "ipfs"); + if (IS_ERR(xudc->ipfs)) + return PTR_ERR(xudc->ipfs); + } + + xudc->irq = platform_get_irq(pdev, 0); + if (xudc->irq < 0) + return xudc->irq; + + err = devm_request_irq(&pdev->dev, xudc->irq, tegra_xudc_irq, 0, + dev_name(&pdev->dev), xudc); + if (err < 0) { + dev_err(xudc->dev, "failed to claim IRQ#%u: %d\n", xudc->irq, + err); + return err; + } + + xudc->clks = devm_kcalloc(&pdev->dev, xudc->soc->num_clks, sizeof(*xudc->clks), + GFP_KERNEL); + if (!xudc->clks) + return -ENOMEM; + + for (i = 0; i < xudc->soc->num_clks; i++) + xudc->clks[i].id = xudc->soc->clock_names[i]; + + err = devm_clk_bulk_get(&pdev->dev, xudc->soc->num_clks, xudc->clks); + if (err) { + dev_err_probe(xudc->dev, err, "failed to request clocks\n"); + return err; + } + + xudc->supplies = devm_kcalloc(&pdev->dev, xudc->soc->num_supplies, + sizeof(*xudc->supplies), GFP_KERNEL); + if (!xudc->supplies) + return -ENOMEM; + + for (i = 0; i < xudc->soc->num_supplies; i++) + xudc->supplies[i].supply = xudc->soc->supply_names[i]; + + err = devm_regulator_bulk_get(&pdev->dev, xudc->soc->num_supplies, + xudc->supplies); + if (err) { + dev_err_probe(xudc->dev, err, "failed to request regulators\n"); + return err; + } + + xudc->padctl = tegra_xusb_padctl_get(&pdev->dev); + if (IS_ERR(xudc->padctl)) + return PTR_ERR(xudc->padctl); + + err = regulator_bulk_enable(xudc->soc->num_supplies, xudc->supplies); + if (err) { + dev_err(xudc->dev, "failed to enable regulators: %d\n", err); + goto put_padctl; + } + + err = tegra_xudc_phy_get(xudc); + if (err) + goto disable_regulator; + + err = tegra_xudc_powerdomain_init(xudc); + if (err) + goto put_powerdomains; + + err = tegra_xudc_phy_init(xudc); + if (err) + goto put_powerdomains; + + err = tegra_xudc_alloc_event_ring(xudc); + if (err) + goto disable_phy; + + err = tegra_xudc_alloc_eps(xudc); + if (err) + goto free_event_ring; + + spin_lock_init(&xudc->lock); + + init_completion(&xudc->disconnect_complete); + + INIT_WORK(&xudc->usb_role_sw_work, tegra_xudc_usb_role_sw_work); + + INIT_DELAYED_WORK(&xudc->plc_reset_work, tegra_xudc_plc_reset_work); + + INIT_DELAYED_WORK(&xudc->port_reset_war_work, + tegra_xudc_port_reset_war_work); + + pm_runtime_enable(&pdev->dev); + + xudc->gadget.ops = &tegra_xudc_gadget_ops; + xudc->gadget.ep0 = &xudc->ep[0].usb_ep; + xudc->gadget.name = "tegra-xudc"; + xudc->gadget.max_speed = USB_SPEED_SUPER; + + err = usb_add_gadget_udc(&pdev->dev, &xudc->gadget); + if (err) { + dev_err(&pdev->dev, "failed to add USB gadget: %d\n", err); + goto free_eps; + } + + return 0; + +free_eps: + pm_runtime_disable(&pdev->dev); + tegra_xudc_free_eps(xudc); +free_event_ring: + tegra_xudc_free_event_ring(xudc); +disable_phy: + tegra_xudc_phy_exit(xudc); +put_powerdomains: + tegra_xudc_powerdomain_remove(xudc); +disable_regulator: + regulator_bulk_disable(xudc->soc->num_supplies, xudc->supplies); +put_padctl: + tegra_xusb_padctl_put(xudc->padctl); + + return err; +} + +static int tegra_xudc_remove(struct platform_device *pdev) +{ + struct tegra_xudc *xudc = platform_get_drvdata(pdev); + unsigned int i; + + pm_runtime_get_sync(xudc->dev); + + cancel_delayed_work_sync(&xudc->plc_reset_work); + cancel_work_sync(&xudc->usb_role_sw_work); + + usb_del_gadget_udc(&xudc->gadget); + + tegra_xudc_free_eps(xudc); + tegra_xudc_free_event_ring(xudc); + + tegra_xudc_powerdomain_remove(xudc); + + regulator_bulk_disable(xudc->soc->num_supplies, xudc->supplies); + + for (i = 0; i < xudc->soc->num_phys; i++) { + phy_power_off(xudc->utmi_phy[i]); + phy_power_off(xudc->usb3_phy[i]); + } + + tegra_xudc_phy_exit(xudc); + + pm_runtime_disable(xudc->dev); + pm_runtime_put(xudc->dev); + + tegra_xusb_padctl_put(xudc->padctl); + + return 0; +} + +static int __maybe_unused tegra_xudc_powergate(struct tegra_xudc *xudc) +{ + unsigned long flags; + + dev_dbg(xudc->dev, "entering ELPG\n"); + + spin_lock_irqsave(&xudc->lock, flags); + + xudc->powergated = true; + xudc->saved_regs.ctrl = xudc_readl(xudc, CTRL); + xudc->saved_regs.portpm = xudc_readl(xudc, PORTPM); + xudc_writel(xudc, 0, CTRL); + + spin_unlock_irqrestore(&xudc->lock, flags); + + clk_bulk_disable_unprepare(xudc->soc->num_clks, xudc->clks); + + regulator_bulk_disable(xudc->soc->num_supplies, xudc->supplies); + + dev_dbg(xudc->dev, "entering ELPG done\n"); + return 0; +} + +static int __maybe_unused tegra_xudc_unpowergate(struct tegra_xudc *xudc) +{ + unsigned long flags; + int err; + + dev_dbg(xudc->dev, "exiting ELPG\n"); + + err = regulator_bulk_enable(xudc->soc->num_supplies, + xudc->supplies); + if (err < 0) + return err; + + err = clk_bulk_prepare_enable(xudc->soc->num_clks, xudc->clks); + if (err < 0) + return err; + + tegra_xudc_fpci_ipfs_init(xudc); + + tegra_xudc_device_params_init(xudc); + + tegra_xudc_init_event_ring(xudc); + + tegra_xudc_init_eps(xudc); + + xudc_writel(xudc, xudc->saved_regs.portpm, PORTPM); + xudc_writel(xudc, xudc->saved_regs.ctrl, CTRL); + + spin_lock_irqsave(&xudc->lock, flags); + xudc->powergated = false; + spin_unlock_irqrestore(&xudc->lock, flags); + + dev_dbg(xudc->dev, "exiting ELPG done\n"); + return 0; +} + +static int __maybe_unused tegra_xudc_suspend(struct device *dev) +{ + struct tegra_xudc *xudc = dev_get_drvdata(dev); + unsigned long flags; + + spin_lock_irqsave(&xudc->lock, flags); + xudc->suspended = true; + spin_unlock_irqrestore(&xudc->lock, flags); + + flush_work(&xudc->usb_role_sw_work); + + if (!pm_runtime_status_suspended(dev)) { + /* Forcibly disconnect before powergating. */ + tegra_xudc_device_mode_off(xudc); + tegra_xudc_powergate(xudc); + } + + pm_runtime_disable(dev); + + return 0; +} + +static int __maybe_unused tegra_xudc_resume(struct device *dev) +{ + struct tegra_xudc *xudc = dev_get_drvdata(dev); + unsigned long flags; + int err; + + err = tegra_xudc_unpowergate(xudc); + if (err < 0) + return err; + + spin_lock_irqsave(&xudc->lock, flags); + xudc->suspended = false; + spin_unlock_irqrestore(&xudc->lock, flags); + + schedule_work(&xudc->usb_role_sw_work); + + pm_runtime_enable(dev); + + return 0; +} + +static int __maybe_unused tegra_xudc_runtime_suspend(struct device *dev) +{ + struct tegra_xudc *xudc = dev_get_drvdata(dev); + + return tegra_xudc_powergate(xudc); +} + +static int __maybe_unused tegra_xudc_runtime_resume(struct device *dev) +{ + struct tegra_xudc *xudc = dev_get_drvdata(dev); + + return tegra_xudc_unpowergate(xudc); +} + +static const struct dev_pm_ops tegra_xudc_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(tegra_xudc_suspend, tegra_xudc_resume) + SET_RUNTIME_PM_OPS(tegra_xudc_runtime_suspend, + tegra_xudc_runtime_resume, NULL) +}; + +static struct platform_driver tegra_xudc_driver = { + .probe = tegra_xudc_probe, + .remove = tegra_xudc_remove, + .driver = { + .name = "tegra-xudc", + .pm = &tegra_xudc_pm_ops, + .of_match_table = tegra_xudc_of_match, + }, +}; +module_platform_driver(tegra_xudc_driver); + +MODULE_DESCRIPTION("NVIDIA Tegra XUSB Device Controller"); +MODULE_AUTHOR("Andrew Bresticker <abrestic@chromium.org>"); +MODULE_AUTHOR("Hui Fu <hfu@nvidia.com>"); +MODULE_AUTHOR("Nagarjuna Kristam <nkristam@nvidia.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/gadget/udc/trace.c b/drivers/usb/gadget/udc/trace.c new file mode 100644 index 000000000..19e837de2 --- /dev/null +++ b/drivers/usb/gadget/udc/trace.c @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * trace.c - USB Gadget Framework Trace Support + * + * Copyright (C) 2016 Intel Corporation + * Author: Felipe Balbi <felipe.balbi@linux.intel.com> + */ + +#define CREATE_TRACE_POINTS +#include "trace.h" diff --git a/drivers/usb/gadget/udc/trace.h b/drivers/usb/gadget/udc/trace.h new file mode 100644 index 000000000..abdbcb1ba --- /dev/null +++ b/drivers/usb/gadget/udc/trace.h @@ -0,0 +1,289 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * udc.c - Core UDC Framework + * + * Copyright (C) 2016 Intel Corporation + * Author: Felipe Balbi <felipe.balbi@linux.intel.com> + */ + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM gadget + +#if !defined(__UDC_TRACE_H) || defined(TRACE_HEADER_MULTI_READ) +#define __UDC_TRACE_H + +#include <linux/types.h> +#include <linux/tracepoint.h> +#include <asm/byteorder.h> +#include <linux/usb/gadget.h> + +DECLARE_EVENT_CLASS(udc_log_gadget, + TP_PROTO(struct usb_gadget *g, int ret), + TP_ARGS(g, ret), + TP_STRUCT__entry( + __field(enum usb_device_speed, speed) + __field(enum usb_device_speed, max_speed) + __field(enum usb_device_state, state) + __field(unsigned, mA) + __field(unsigned, sg_supported) + __field(unsigned, is_otg) + __field(unsigned, is_a_peripheral) + __field(unsigned, b_hnp_enable) + __field(unsigned, a_hnp_support) + __field(unsigned, hnp_polling_support) + __field(unsigned, host_request_flag) + __field(unsigned, quirk_ep_out_aligned_size) + __field(unsigned, quirk_altset_not_supp) + __field(unsigned, quirk_stall_not_supp) + __field(unsigned, quirk_zlp_not_supp) + __field(unsigned, is_selfpowered) + __field(unsigned, deactivated) + __field(unsigned, connected) + __field(int, ret) + ), + TP_fast_assign( + __entry->speed = g->speed; + __entry->max_speed = g->max_speed; + __entry->state = g->state; + __entry->mA = g->mA; + __entry->sg_supported = g->sg_supported; + __entry->is_otg = g->is_otg; + __entry->is_a_peripheral = g->is_a_peripheral; + __entry->b_hnp_enable = g->b_hnp_enable; + __entry->a_hnp_support = g->a_hnp_support; + __entry->hnp_polling_support = g->hnp_polling_support; + __entry->host_request_flag = g->host_request_flag; + __entry->quirk_ep_out_aligned_size = g->quirk_ep_out_aligned_size; + __entry->quirk_altset_not_supp = g->quirk_altset_not_supp; + __entry->quirk_stall_not_supp = g->quirk_stall_not_supp; + __entry->quirk_zlp_not_supp = g->quirk_zlp_not_supp; + __entry->is_selfpowered = g->is_selfpowered; + __entry->deactivated = g->deactivated; + __entry->connected = g->connected; + __entry->ret = ret; + ), + TP_printk("speed %d/%d state %d %dmA [%s%s%s%s%s%s%s%s%s%s%s%s%s%s] --> %d", + __entry->speed, __entry->max_speed, __entry->state, __entry->mA, + __entry->sg_supported ? "sg:" : "", + __entry->is_otg ? "OTG:" : "", + __entry->is_a_peripheral ? "a_peripheral:" : "", + __entry->b_hnp_enable ? "b_hnp:" : "", + __entry->a_hnp_support ? "a_hnp:" : "", + __entry->hnp_polling_support ? "hnp_poll:" : "", + __entry->host_request_flag ? "hostreq:" : "", + __entry->quirk_ep_out_aligned_size ? "out_aligned:" : "", + __entry->quirk_altset_not_supp ? "no_altset:" : "", + __entry->quirk_stall_not_supp ? "no_stall:" : "", + __entry->quirk_zlp_not_supp ? "no_zlp" : "", + __entry->is_selfpowered ? "self-powered:" : "bus-powered:", + __entry->deactivated ? "deactivated:" : "activated:", + __entry->connected ? "connected" : "disconnected", + __entry->ret) +); + +DEFINE_EVENT(udc_log_gadget, usb_gadget_frame_number, + TP_PROTO(struct usb_gadget *g, int ret), + TP_ARGS(g, ret) +); + +DEFINE_EVENT(udc_log_gadget, usb_gadget_wakeup, + TP_PROTO(struct usb_gadget *g, int ret), + TP_ARGS(g, ret) +); + +DEFINE_EVENT(udc_log_gadget, usb_gadget_set_selfpowered, + TP_PROTO(struct usb_gadget *g, int ret), + TP_ARGS(g, ret) +); + +DEFINE_EVENT(udc_log_gadget, usb_gadget_clear_selfpowered, + TP_PROTO(struct usb_gadget *g, int ret), + TP_ARGS(g, ret) +); + +DEFINE_EVENT(udc_log_gadget, usb_gadget_vbus_connect, + TP_PROTO(struct usb_gadget *g, int ret), + TP_ARGS(g, ret) +); + +DEFINE_EVENT(udc_log_gadget, usb_gadget_vbus_draw, + TP_PROTO(struct usb_gadget *g, int ret), + TP_ARGS(g, ret) +); + +DEFINE_EVENT(udc_log_gadget, usb_gadget_vbus_disconnect, + TP_PROTO(struct usb_gadget *g, int ret), + TP_ARGS(g, ret) +); + +DEFINE_EVENT(udc_log_gadget, usb_gadget_connect, + TP_PROTO(struct usb_gadget *g, int ret), + TP_ARGS(g, ret) +); + +DEFINE_EVENT(udc_log_gadget, usb_gadget_disconnect, + TP_PROTO(struct usb_gadget *g, int ret), + TP_ARGS(g, ret) +); + +DEFINE_EVENT(udc_log_gadget, usb_gadget_deactivate, + TP_PROTO(struct usb_gadget *g, int ret), + TP_ARGS(g, ret) +); + +DEFINE_EVENT(udc_log_gadget, usb_gadget_activate, + TP_PROTO(struct usb_gadget *g, int ret), + TP_ARGS(g, ret) +); + +DECLARE_EVENT_CLASS(udc_log_ep, + TP_PROTO(struct usb_ep *ep, int ret), + TP_ARGS(ep, ret), + TP_STRUCT__entry( + __string(name, ep->name) + __field(unsigned, maxpacket) + __field(unsigned, maxpacket_limit) + __field(unsigned, max_streams) + __field(unsigned, mult) + __field(unsigned, maxburst) + __field(u8, address) + __field(bool, claimed) + __field(bool, enabled) + __field(int, ret) + ), + TP_fast_assign( + __assign_str(name, ep->name); + __entry->maxpacket = ep->maxpacket; + __entry->maxpacket_limit = ep->maxpacket_limit; + __entry->max_streams = ep->max_streams; + __entry->mult = ep->mult; + __entry->maxburst = ep->maxburst; + __entry->address = ep->address, + __entry->claimed = ep->claimed; + __entry->enabled = ep->enabled; + __entry->ret = ret; + ), + TP_printk("%s: mps %d/%d streams %d mult %d burst %d addr %02x %s%s --> %d", + __get_str(name), __entry->maxpacket, __entry->maxpacket_limit, + __entry->max_streams, __entry->mult, __entry->maxburst, + __entry->address, __entry->claimed ? "claimed:" : "released:", + __entry->enabled ? "enabled" : "disabled", ret) +); + +DEFINE_EVENT(udc_log_ep, usb_ep_set_maxpacket_limit, + TP_PROTO(struct usb_ep *ep, int ret), + TP_ARGS(ep, ret) +); + +DEFINE_EVENT(udc_log_ep, usb_ep_enable, + TP_PROTO(struct usb_ep *ep, int ret), + TP_ARGS(ep, ret) +); + +DEFINE_EVENT(udc_log_ep, usb_ep_disable, + TP_PROTO(struct usb_ep *ep, int ret), + TP_ARGS(ep, ret) +); + +DEFINE_EVENT(udc_log_ep, usb_ep_set_halt, + TP_PROTO(struct usb_ep *ep, int ret), + TP_ARGS(ep, ret) +); + +DEFINE_EVENT(udc_log_ep, usb_ep_clear_halt, + TP_PROTO(struct usb_ep *ep, int ret), + TP_ARGS(ep, ret) +); + +DEFINE_EVENT(udc_log_ep, usb_ep_set_wedge, + TP_PROTO(struct usb_ep *ep, int ret), + TP_ARGS(ep, ret) +); + +DEFINE_EVENT(udc_log_ep, usb_ep_fifo_status, + TP_PROTO(struct usb_ep *ep, int ret), + TP_ARGS(ep, ret) +); + +DEFINE_EVENT(udc_log_ep, usb_ep_fifo_flush, + TP_PROTO(struct usb_ep *ep, int ret), + TP_ARGS(ep, ret) +); + +DECLARE_EVENT_CLASS(udc_log_req, + TP_PROTO(struct usb_ep *ep, struct usb_request *req, int ret), + TP_ARGS(ep, req, ret), + TP_STRUCT__entry( + __string(name, ep->name) + __field(unsigned, length) + __field(unsigned, actual) + __field(unsigned, num_sgs) + __field(unsigned, num_mapped_sgs) + __field(unsigned, stream_id) + __field(unsigned, no_interrupt) + __field(unsigned, zero) + __field(unsigned, short_not_ok) + __field(int, status) + __field(int, ret) + __field(struct usb_request *, req) + ), + TP_fast_assign( + __assign_str(name, ep->name); + __entry->length = req->length; + __entry->actual = req->actual; + __entry->num_sgs = req->num_sgs; + __entry->num_mapped_sgs = req->num_mapped_sgs; + __entry->stream_id = req->stream_id; + __entry->no_interrupt = req->no_interrupt; + __entry->zero = req->zero; + __entry->short_not_ok = req->short_not_ok; + __entry->status = req->status; + __entry->ret = ret; + __entry->req = req; + ), + TP_printk("%s: req %p length %d/%d sgs %d/%d stream %d %s%s%s status %d --> %d", + __get_str(name),__entry->req, __entry->actual, __entry->length, + __entry->num_mapped_sgs, __entry->num_sgs, __entry->stream_id, + __entry->zero ? "Z" : "z", + __entry->short_not_ok ? "S" : "s", + __entry->no_interrupt ? "i" : "I", + __entry->status, __entry->ret + ) +); + +DEFINE_EVENT(udc_log_req, usb_ep_alloc_request, + TP_PROTO(struct usb_ep *ep, struct usb_request *req, int ret), + TP_ARGS(ep, req, ret) +); + +DEFINE_EVENT(udc_log_req, usb_ep_free_request, + TP_PROTO(struct usb_ep *ep, struct usb_request *req, int ret), + TP_ARGS(ep, req, ret) +); + +DEFINE_EVENT(udc_log_req, usb_ep_queue, + TP_PROTO(struct usb_ep *ep, struct usb_request *req, int ret), + TP_ARGS(ep, req, ret) +); + +DEFINE_EVENT(udc_log_req, usb_ep_dequeue, + TP_PROTO(struct usb_ep *ep, struct usb_request *req, int ret), + TP_ARGS(ep, req, ret) +); + +DEFINE_EVENT(udc_log_req, usb_gadget_giveback_request, + TP_PROTO(struct usb_ep *ep, struct usb_request *req, int ret), + TP_ARGS(ep, req, ret) +); + +#endif /* __UDC_TRACE_H */ + +/* this part has to be here */ + +#undef TRACE_INCLUDE_PATH +#define TRACE_INCLUDE_PATH . + +#undef TRACE_INCLUDE_FILE +#define TRACE_INCLUDE_FILE trace + +#include <trace/define_trace.h> diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c new file mode 100644 index 000000000..4c7a4f770 --- /dev/null +++ b/drivers/usb/gadget/udc/udc-xilinx.c @@ -0,0 +1,2271 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Xilinx USB peripheral controller driver + * + * Copyright (C) 2004 by Thomas Rathbone + * Copyright (C) 2005 by HP Labs + * Copyright (C) 2005 by David Brownell + * Copyright (C) 2010 - 2014 Xilinx, Inc. + * + * Some parts of this driver code is based on the driver for at91-series + * USB peripheral controller (at91_udc.c). + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> +#include <linux/of_irq.h> +#include <linux/prefetch.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + +/* Register offsets for the USB device.*/ +#define XUSB_EP0_CONFIG_OFFSET 0x0000 /* EP0 Config Reg Offset */ +#define XUSB_SETUP_PKT_ADDR_OFFSET 0x0080 /* Setup Packet Address */ +#define XUSB_ADDRESS_OFFSET 0x0100 /* Address Register */ +#define XUSB_CONTROL_OFFSET 0x0104 /* Control Register */ +#define XUSB_STATUS_OFFSET 0x0108 /* Status Register */ +#define XUSB_FRAMENUM_OFFSET 0x010C /* Frame Number Register */ +#define XUSB_IER_OFFSET 0x0110 /* Interrupt Enable Register */ +#define XUSB_BUFFREADY_OFFSET 0x0114 /* Buffer Ready Register */ +#define XUSB_TESTMODE_OFFSET 0x0118 /* Test Mode Register */ +#define XUSB_DMA_RESET_OFFSET 0x0200 /* DMA Soft Reset Register */ +#define XUSB_DMA_CONTROL_OFFSET 0x0204 /* DMA Control Register */ +#define XUSB_DMA_DSAR_ADDR_OFFSET 0x0208 /* DMA source Address Reg */ +#define XUSB_DMA_DDAR_ADDR_OFFSET 0x020C /* DMA destination Addr Reg */ +#define XUSB_DMA_LENGTH_OFFSET 0x0210 /* DMA Length Register */ +#define XUSB_DMA_STATUS_OFFSET 0x0214 /* DMA Status Register */ + +/* Endpoint Configuration Space offsets */ +#define XUSB_EP_CFGSTATUS_OFFSET 0x00 /* Endpoint Config Status */ +#define XUSB_EP_BUF0COUNT_OFFSET 0x08 /* Buffer 0 Count */ +#define XUSB_EP_BUF1COUNT_OFFSET 0x0C /* Buffer 1 Count */ + +#define XUSB_CONTROL_USB_READY_MASK 0x80000000 /* USB ready Mask */ +#define XUSB_CONTROL_USB_RMTWAKE_MASK 0x40000000 /* Remote wake up mask */ + +/* Interrupt register related masks.*/ +#define XUSB_STATUS_GLOBAL_INTR_MASK 0x80000000 /* Global Intr Enable */ +#define XUSB_STATUS_DMADONE_MASK 0x04000000 /* DMA done Mask */ +#define XUSB_STATUS_DMAERR_MASK 0x02000000 /* DMA Error Mask */ +#define XUSB_STATUS_DMABUSY_MASK 0x80000000 /* DMA Error Mask */ +#define XUSB_STATUS_RESUME_MASK 0x01000000 /* USB Resume Mask */ +#define XUSB_STATUS_RESET_MASK 0x00800000 /* USB Reset Mask */ +#define XUSB_STATUS_SUSPEND_MASK 0x00400000 /* USB Suspend Mask */ +#define XUSB_STATUS_DISCONNECT_MASK 0x00200000 /* USB Disconnect Mask */ +#define XUSB_STATUS_FIFO_BUFF_RDY_MASK 0x00100000 /* FIFO Buff Ready Mask */ +#define XUSB_STATUS_FIFO_BUFF_FREE_MASK 0x00080000 /* FIFO Buff Free Mask */ +#define XUSB_STATUS_SETUP_PACKET_MASK 0x00040000 /* Setup packet received */ +#define XUSB_STATUS_EP1_BUFF2_COMP_MASK 0x00000200 /* EP 1 Buff 2 Processed */ +#define XUSB_STATUS_EP1_BUFF1_COMP_MASK 0x00000002 /* EP 1 Buff 1 Processed */ +#define XUSB_STATUS_EP0_BUFF2_COMP_MASK 0x00000100 /* EP 0 Buff 2 Processed */ +#define XUSB_STATUS_EP0_BUFF1_COMP_MASK 0x00000001 /* EP 0 Buff 1 Processed */ +#define XUSB_STATUS_HIGH_SPEED_MASK 0x00010000 /* USB Speed Mask */ +/* Suspend,Reset,Suspend and Disconnect Mask */ +#define XUSB_STATUS_INTR_EVENT_MASK 0x01E00000 +/* Buffers completion Mask */ +#define XUSB_STATUS_INTR_BUFF_COMP_ALL_MASK 0x0000FEFF +/* Mask for buffer 0 and buffer 1 completion for all Endpoints */ +#define XUSB_STATUS_INTR_BUFF_COMP_SHIFT_MASK 0x00000101 +#define XUSB_STATUS_EP_BUFF2_SHIFT 8 /* EP buffer offset */ + +/* Endpoint Configuration Status Register */ +#define XUSB_EP_CFG_VALID_MASK 0x80000000 /* Endpoint Valid bit */ +#define XUSB_EP_CFG_STALL_MASK 0x40000000 /* Endpoint Stall bit */ +#define XUSB_EP_CFG_DATA_TOGGLE_MASK 0x08000000 /* Endpoint Data toggle */ + +/* USB device specific global configuration constants.*/ +#define XUSB_MAX_ENDPOINTS 8 /* Maximum End Points */ +#define XUSB_EP_NUMBER_ZERO 0 /* End point Zero */ +/* DPRAM is the source address for DMA transfer */ +#define XUSB_DMA_READ_FROM_DPRAM 0x80000000 +#define XUSB_DMA_DMASR_BUSY 0x80000000 /* DMA busy */ +#define XUSB_DMA_DMASR_ERROR 0x40000000 /* DMA Error */ +/* + * When this bit is set, the DMA buffer ready bit is set by hardware upon + * DMA transfer completion. + */ +#define XUSB_DMA_BRR_CTRL 0x40000000 /* DMA bufready ctrl bit */ +/* Phase States */ +#define SETUP_PHASE 0x0000 /* Setup Phase */ +#define DATA_PHASE 0x0001 /* Data Phase */ +#define STATUS_PHASE 0x0002 /* Status Phase */ + +#define EP0_MAX_PACKET 64 /* Endpoint 0 maximum packet length */ +#define STATUSBUFF_SIZE 2 /* Buffer size for GET_STATUS command */ +#define EPNAME_SIZE 4 /* Buffer size for endpoint name */ + +/* container_of helper macros */ +#define to_udc(g) container_of((g), struct xusb_udc, gadget) +#define to_xusb_ep(ep) container_of((ep), struct xusb_ep, ep_usb) +#define to_xusb_req(req) container_of((req), struct xusb_req, usb_req) + +/** + * struct xusb_req - Xilinx USB device request structure + * @usb_req: Linux usb request structure + * @queue: usb device request queue + * @ep: pointer to xusb_endpoint structure + */ +struct xusb_req { + struct usb_request usb_req; + struct list_head queue; + struct xusb_ep *ep; +}; + +/** + * struct xusb_ep - USB end point structure. + * @ep_usb: usb endpoint instance + * @queue: endpoint message queue + * @udc: xilinx usb peripheral driver instance pointer + * @desc: pointer to the usb endpoint descriptor + * @rambase: the endpoint buffer address + * @offset: the endpoint register offset value + * @name: name of the endpoint + * @epnumber: endpoint number + * @maxpacket: maximum packet size the endpoint can store + * @buffer0count: the size of the packet recieved in the first buffer + * @buffer1count: the size of the packet received in the second buffer + * @curbufnum: current buffer of endpoint that will be processed next + * @buffer0ready: the busy state of first buffer + * @buffer1ready: the busy state of second buffer + * @is_in: endpoint direction (IN or OUT) + * @is_iso: endpoint type(isochronous or non isochronous) + */ +struct xusb_ep { + struct usb_ep ep_usb; + struct list_head queue; + struct xusb_udc *udc; + const struct usb_endpoint_descriptor *desc; + u32 rambase; + u32 offset; + char name[4]; + u16 epnumber; + u16 maxpacket; + u16 buffer0count; + u16 buffer1count; + u8 curbufnum; + bool buffer0ready; + bool buffer1ready; + bool is_in; + bool is_iso; +}; + +/** + * struct xusb_udc - USB peripheral driver structure + * @gadget: USB gadget driver instance + * @ep: an array of endpoint structures + * @driver: pointer to the usb gadget driver instance + * @setup: usb_ctrlrequest structure for control requests + * @req: pointer to dummy request for get status command + * @dev: pointer to device structure in gadget + * @usb_state: device in suspended state or not + * @remote_wkp: remote wakeup enabled by host + * @setupseqtx: tx status + * @setupseqrx: rx status + * @addr: the usb device base address + * @lock: instance of spinlock + * @dma_enabled: flag indicating whether the dma is included in the system + * @clk: pointer to struct clk + * @read_fn: function pointer to read device registers + * @write_fn: function pointer to write to device registers + */ +struct xusb_udc { + struct usb_gadget gadget; + struct xusb_ep ep[8]; + struct usb_gadget_driver *driver; + struct usb_ctrlrequest setup; + struct xusb_req *req; + struct device *dev; + u32 usb_state; + u32 remote_wkp; + u32 setupseqtx; + u32 setupseqrx; + void __iomem *addr; + spinlock_t lock; + bool dma_enabled; + struct clk *clk; + + unsigned int (*read_fn)(void __iomem *); + void (*write_fn)(void __iomem *, u32, u32); +}; + +/* Endpoint buffer start addresses in the core */ +static u32 rambase[8] = { 0x22, 0x1000, 0x1100, 0x1200, 0x1300, 0x1400, 0x1500, + 0x1600 }; + +static const char driver_name[] = "xilinx-udc"; +static const char ep0name[] = "ep0"; + +/* Control endpoint configuration.*/ +static const struct usb_endpoint_descriptor config_bulk_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(EP0_MAX_PACKET), +}; + +/** + * xudc_write32 - little endian write to device registers + * @addr: base addr of device registers + * @offset: register offset + * @val: data to be written + */ +static void xudc_write32(void __iomem *addr, u32 offset, u32 val) +{ + iowrite32(val, addr + offset); +} + +/** + * xudc_read32 - little endian read from device registers + * @addr: addr of device register + * Return: value at addr + */ +static unsigned int xudc_read32(void __iomem *addr) +{ + return ioread32(addr); +} + +/** + * xudc_write32_be - big endian write to device registers + * @addr: base addr of device registers + * @offset: register offset + * @val: data to be written + */ +static void xudc_write32_be(void __iomem *addr, u32 offset, u32 val) +{ + iowrite32be(val, addr + offset); +} + +/** + * xudc_read32_be - big endian read from device registers + * @addr: addr of device register + * Return: value at addr + */ +static unsigned int xudc_read32_be(void __iomem *addr) +{ + return ioread32be(addr); +} + +/** + * xudc_wrstatus - Sets up the usb device status stages. + * @udc: pointer to the usb device controller structure. + */ +static void xudc_wrstatus(struct xusb_udc *udc) +{ + struct xusb_ep *ep0 = &udc->ep[XUSB_EP_NUMBER_ZERO]; + u32 epcfgreg; + + epcfgreg = udc->read_fn(udc->addr + ep0->offset)| + XUSB_EP_CFG_DATA_TOGGLE_MASK; + udc->write_fn(udc->addr, ep0->offset, epcfgreg); + udc->write_fn(udc->addr, ep0->offset + XUSB_EP_BUF0COUNT_OFFSET, 0); + udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1); +} + +/** + * xudc_epconfig - Configures the given endpoint. + * @ep: pointer to the usb device endpoint structure. + * @udc: pointer to the usb peripheral controller structure. + * + * This function configures a specific endpoint with the given configuration + * data. + */ +static void xudc_epconfig(struct xusb_ep *ep, struct xusb_udc *udc) +{ + u32 epcfgreg; + + /* + * Configure the end point direction, type, Max Packet Size and the + * EP buffer location. + */ + epcfgreg = ((ep->is_in << 29) | (ep->is_iso << 28) | + (ep->ep_usb.maxpacket << 15) | (ep->rambase)); + udc->write_fn(udc->addr, ep->offset, epcfgreg); + + /* Set the Buffer count and the Buffer ready bits.*/ + udc->write_fn(udc->addr, ep->offset + XUSB_EP_BUF0COUNT_OFFSET, + ep->buffer0count); + udc->write_fn(udc->addr, ep->offset + XUSB_EP_BUF1COUNT_OFFSET, + ep->buffer1count); + if (ep->buffer0ready) + udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, + 1 << ep->epnumber); + if (ep->buffer1ready) + udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, + 1 << (ep->epnumber + XUSB_STATUS_EP_BUFF2_SHIFT)); +} + +/** + * xudc_start_dma - Starts DMA transfer. + * @ep: pointer to the usb device endpoint structure. + * @src: DMA source address. + * @dst: DMA destination address. + * @length: number of bytes to transfer. + * + * Return: 0 on success, error code on failure + * + * This function starts DMA transfer by writing to DMA source, + * destination and lenth registers. + */ +static int xudc_start_dma(struct xusb_ep *ep, dma_addr_t src, + dma_addr_t dst, u32 length) +{ + struct xusb_udc *udc = ep->udc; + int rc = 0; + u32 timeout = 500; + u32 reg; + + /* + * Set the addresses in the DMA source and + * destination registers and then set the length + * into the DMA length register. + */ + udc->write_fn(udc->addr, XUSB_DMA_DSAR_ADDR_OFFSET, src); + udc->write_fn(udc->addr, XUSB_DMA_DDAR_ADDR_OFFSET, dst); + udc->write_fn(udc->addr, XUSB_DMA_LENGTH_OFFSET, length); + + /* + * Wait till DMA transaction is complete and + * check whether the DMA transaction was + * successful. + */ + do { + reg = udc->read_fn(udc->addr + XUSB_DMA_STATUS_OFFSET); + if (!(reg & XUSB_DMA_DMASR_BUSY)) + break; + + /* + * We can't sleep here, because it's also called from + * interrupt context. + */ + timeout--; + if (!timeout) { + dev_err(udc->dev, "DMA timeout\n"); + return -ETIMEDOUT; + } + udelay(1); + } while (1); + + if ((udc->read_fn(udc->addr + XUSB_DMA_STATUS_OFFSET) & + XUSB_DMA_DMASR_ERROR) == XUSB_DMA_DMASR_ERROR){ + dev_err(udc->dev, "DMA Error\n"); + rc = -EINVAL; + } + + return rc; +} + +/** + * xudc_dma_send - Sends IN data using DMA. + * @ep: pointer to the usb device endpoint structure. + * @req: pointer to the usb request structure. + * @buffer: pointer to data to be sent. + * @length: number of bytes to send. + * + * Return: 0 on success, -EAGAIN if no buffer is free and error + * code on failure. + * + * This function sends data using DMA. + */ +static int xudc_dma_send(struct xusb_ep *ep, struct xusb_req *req, + u8 *buffer, u32 length) +{ + u32 *eprambase; + dma_addr_t src; + dma_addr_t dst; + struct xusb_udc *udc = ep->udc; + + src = req->usb_req.dma + req->usb_req.actual; + if (req->usb_req.length) + dma_sync_single_for_device(udc->dev, src, + length, DMA_TO_DEVICE); + if (!ep->curbufnum && !ep->buffer0ready) { + /* Get the Buffer address and copy the transmit data.*/ + eprambase = (u32 __force *)(udc->addr + ep->rambase); + dst = virt_to_phys(eprambase); + udc->write_fn(udc->addr, ep->offset + + XUSB_EP_BUF0COUNT_OFFSET, length); + udc->write_fn(udc->addr, XUSB_DMA_CONTROL_OFFSET, + XUSB_DMA_BRR_CTRL | (1 << ep->epnumber)); + ep->buffer0ready = 1; + ep->curbufnum = 1; + } else if (ep->curbufnum && !ep->buffer1ready) { + /* Get the Buffer address and copy the transmit data.*/ + eprambase = (u32 __force *)(udc->addr + ep->rambase + + ep->ep_usb.maxpacket); + dst = virt_to_phys(eprambase); + udc->write_fn(udc->addr, ep->offset + + XUSB_EP_BUF1COUNT_OFFSET, length); + udc->write_fn(udc->addr, XUSB_DMA_CONTROL_OFFSET, + XUSB_DMA_BRR_CTRL | (1 << (ep->epnumber + + XUSB_STATUS_EP_BUFF2_SHIFT))); + ep->buffer1ready = 1; + ep->curbufnum = 0; + } else { + /* None of ping pong buffers are ready currently .*/ + return -EAGAIN; + } + + return xudc_start_dma(ep, src, dst, length); +} + +/** + * xudc_dma_receive - Receives OUT data using DMA. + * @ep: pointer to the usb device endpoint structure. + * @req: pointer to the usb request structure. + * @buffer: pointer to storage buffer of received data. + * @length: number of bytes to receive. + * + * Return: 0 on success, -EAGAIN if no buffer is free and error + * code on failure. + * + * This function receives data using DMA. + */ +static int xudc_dma_receive(struct xusb_ep *ep, struct xusb_req *req, + u8 *buffer, u32 length) +{ + u32 *eprambase; + dma_addr_t src; + dma_addr_t dst; + struct xusb_udc *udc = ep->udc; + + dst = req->usb_req.dma + req->usb_req.actual; + if (!ep->curbufnum && !ep->buffer0ready) { + /* Get the Buffer address and copy the transmit data */ + eprambase = (u32 __force *)(udc->addr + ep->rambase); + src = virt_to_phys(eprambase); + udc->write_fn(udc->addr, XUSB_DMA_CONTROL_OFFSET, + XUSB_DMA_BRR_CTRL | XUSB_DMA_READ_FROM_DPRAM | + (1 << ep->epnumber)); + ep->buffer0ready = 1; + ep->curbufnum = 1; + } else if (ep->curbufnum && !ep->buffer1ready) { + /* Get the Buffer address and copy the transmit data */ + eprambase = (u32 __force *)(udc->addr + + ep->rambase + ep->ep_usb.maxpacket); + src = virt_to_phys(eprambase); + udc->write_fn(udc->addr, XUSB_DMA_CONTROL_OFFSET, + XUSB_DMA_BRR_CTRL | XUSB_DMA_READ_FROM_DPRAM | + (1 << (ep->epnumber + + XUSB_STATUS_EP_BUFF2_SHIFT))); + ep->buffer1ready = 1; + ep->curbufnum = 0; + } else { + /* None of the ping-pong buffers are ready currently */ + return -EAGAIN; + } + + return xudc_start_dma(ep, src, dst, length); +} + +/** + * xudc_eptxrx - Transmits or receives data to or from an endpoint. + * @ep: pointer to the usb endpoint configuration structure. + * @req: pointer to the usb request structure. + * @bufferptr: pointer to buffer containing the data to be sent. + * @bufferlen: The number of data bytes to be sent. + * + * Return: 0 on success, -EAGAIN if no buffer is free. + * + * This function copies the transmit/receive data to/from the end point buffer + * and enables the buffer for transmission/reception. + */ +static int xudc_eptxrx(struct xusb_ep *ep, struct xusb_req *req, + u8 *bufferptr, u32 bufferlen) +{ + u32 *eprambase; + u32 bytestosend; + int rc = 0; + struct xusb_udc *udc = ep->udc; + + bytestosend = bufferlen; + if (udc->dma_enabled) { + if (ep->is_in) + rc = xudc_dma_send(ep, req, bufferptr, bufferlen); + else + rc = xudc_dma_receive(ep, req, bufferptr, bufferlen); + return rc; + } + /* Put the transmit buffer into the correct ping-pong buffer.*/ + if (!ep->curbufnum && !ep->buffer0ready) { + /* Get the Buffer address and copy the transmit data.*/ + eprambase = (u32 __force *)(udc->addr + ep->rambase); + if (ep->is_in) { + memcpy_toio((void __iomem *)eprambase, bufferptr, + bytestosend); + udc->write_fn(udc->addr, ep->offset + + XUSB_EP_BUF0COUNT_OFFSET, bufferlen); + } else { + memcpy_toio((void __iomem *)bufferptr, eprambase, + bytestosend); + } + /* + * Enable the buffer for transmission. + */ + udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, + 1 << ep->epnumber); + ep->buffer0ready = 1; + ep->curbufnum = 1; + } else if (ep->curbufnum && !ep->buffer1ready) { + /* Get the Buffer address and copy the transmit data.*/ + eprambase = (u32 __force *)(udc->addr + ep->rambase + + ep->ep_usb.maxpacket); + if (ep->is_in) { + memcpy_toio((void __iomem *)eprambase, bufferptr, + bytestosend); + udc->write_fn(udc->addr, ep->offset + + XUSB_EP_BUF1COUNT_OFFSET, bufferlen); + } else { + memcpy_toio((void __iomem *)bufferptr, eprambase, + bytestosend); + } + /* + * Enable the buffer for transmission. + */ + udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, + 1 << (ep->epnumber + XUSB_STATUS_EP_BUFF2_SHIFT)); + ep->buffer1ready = 1; + ep->curbufnum = 0; + } else { + /* None of the ping-pong buffers are ready currently */ + return -EAGAIN; + } + return rc; +} + +/** + * xudc_done - Exeutes the endpoint data transfer completion tasks. + * @ep: pointer to the usb device endpoint structure. + * @req: pointer to the usb request structure. + * @status: Status of the data transfer. + * + * Deletes the message from the queue and updates data transfer completion + * status. + */ +static void xudc_done(struct xusb_ep *ep, struct xusb_req *req, int status) +{ + struct xusb_udc *udc = ep->udc; + + list_del_init(&req->queue); + + if (req->usb_req.status == -EINPROGRESS) + req->usb_req.status = status; + else + status = req->usb_req.status; + + if (status && status != -ESHUTDOWN) + dev_dbg(udc->dev, "%s done %p, status %d\n", + ep->ep_usb.name, req, status); + /* unmap request if DMA is present*/ + if (udc->dma_enabled && ep->epnumber && req->usb_req.length) + usb_gadget_unmap_request(&udc->gadget, &req->usb_req, + ep->is_in); + + if (req->usb_req.complete) { + spin_unlock(&udc->lock); + req->usb_req.complete(&ep->ep_usb, &req->usb_req); + spin_lock(&udc->lock); + } +} + +/** + * xudc_read_fifo - Reads the data from the given endpoint buffer. + * @ep: pointer to the usb device endpoint structure. + * @req: pointer to the usb request structure. + * + * Return: 0 if request is completed and -EAGAIN if not completed. + * + * Pulls OUT packet data from the endpoint buffer. + */ +static int xudc_read_fifo(struct xusb_ep *ep, struct xusb_req *req) +{ + u8 *buf; + u32 is_short, count, bufferspace; + u8 bufoffset; + u8 two_pkts = 0; + int ret; + int retval = -EAGAIN; + struct xusb_udc *udc = ep->udc; + + if (ep->buffer0ready && ep->buffer1ready) { + dev_dbg(udc->dev, "Packet NOT ready!\n"); + return retval; + } +top: + if (ep->curbufnum) + bufoffset = XUSB_EP_BUF1COUNT_OFFSET; + else + bufoffset = XUSB_EP_BUF0COUNT_OFFSET; + + count = udc->read_fn(udc->addr + ep->offset + bufoffset); + + if (!ep->buffer0ready && !ep->buffer1ready) + two_pkts = 1; + + buf = req->usb_req.buf + req->usb_req.actual; + prefetchw(buf); + bufferspace = req->usb_req.length - req->usb_req.actual; + is_short = count < ep->ep_usb.maxpacket; + + if (unlikely(!bufferspace)) { + /* + * This happens when the driver's buffer + * is smaller than what the host sent. + * discard the extra data. + */ + if (req->usb_req.status != -EOVERFLOW) + dev_dbg(udc->dev, "%s overflow %d\n", + ep->ep_usb.name, count); + req->usb_req.status = -EOVERFLOW; + xudc_done(ep, req, -EOVERFLOW); + return 0; + } + + ret = xudc_eptxrx(ep, req, buf, count); + switch (ret) { + case 0: + req->usb_req.actual += min(count, bufferspace); + dev_dbg(udc->dev, "read %s, %d bytes%s req %p %d/%d\n", + ep->ep_usb.name, count, is_short ? "/S" : "", req, + req->usb_req.actual, req->usb_req.length); + + /* Completion */ + if ((req->usb_req.actual == req->usb_req.length) || is_short) { + if (udc->dma_enabled && req->usb_req.length) + dma_sync_single_for_cpu(udc->dev, + req->usb_req.dma, + req->usb_req.actual, + DMA_FROM_DEVICE); + xudc_done(ep, req, 0); + return 0; + } + if (two_pkts) { + two_pkts = 0; + goto top; + } + break; + case -EAGAIN: + dev_dbg(udc->dev, "receive busy\n"); + break; + case -EINVAL: + case -ETIMEDOUT: + /* DMA error, dequeue the request */ + xudc_done(ep, req, -ECONNRESET); + retval = 0; + break; + } + + return retval; +} + +/** + * xudc_write_fifo - Writes data into the given endpoint buffer. + * @ep: pointer to the usb device endpoint structure. + * @req: pointer to the usb request structure. + * + * Return: 0 if request is completed and -EAGAIN if not completed. + * + * Loads endpoint buffer for an IN packet. + */ +static int xudc_write_fifo(struct xusb_ep *ep, struct xusb_req *req) +{ + u32 max; + u32 length; + int ret; + int retval = -EAGAIN; + struct xusb_udc *udc = ep->udc; + int is_last, is_short = 0; + u8 *buf; + + max = le16_to_cpu(ep->desc->wMaxPacketSize); + buf = req->usb_req.buf + req->usb_req.actual; + prefetch(buf); + length = req->usb_req.length - req->usb_req.actual; + length = min(length, max); + + ret = xudc_eptxrx(ep, req, buf, length); + switch (ret) { + case 0: + req->usb_req.actual += length; + if (unlikely(length != max)) { + is_last = is_short = 1; + } else { + if (likely(req->usb_req.length != + req->usb_req.actual) || req->usb_req.zero) + is_last = 0; + else + is_last = 1; + } + dev_dbg(udc->dev, "%s: wrote %s %d bytes%s%s %d left %p\n", + __func__, ep->ep_usb.name, length, is_last ? "/L" : "", + is_short ? "/S" : "", + req->usb_req.length - req->usb_req.actual, req); + /* completion */ + if (is_last) { + xudc_done(ep, req, 0); + retval = 0; + } + break; + case -EAGAIN: + dev_dbg(udc->dev, "Send busy\n"); + break; + case -EINVAL: + case -ETIMEDOUT: + /* DMA error, dequeue the request */ + xudc_done(ep, req, -ECONNRESET); + retval = 0; + break; + } + + return retval; +} + +/** + * xudc_nuke - Cleans up the data transfer message list. + * @ep: pointer to the usb device endpoint structure. + * @status: Status of the data transfer. + */ +static void xudc_nuke(struct xusb_ep *ep, int status) +{ + struct xusb_req *req; + + while (!list_empty(&ep->queue)) { + req = list_first_entry(&ep->queue, struct xusb_req, queue); + xudc_done(ep, req, status); + } +} + +/** + * xudc_ep_set_halt - Stalls/unstalls the given endpoint. + * @_ep: pointer to the usb device endpoint structure. + * @value: value to indicate stall/unstall. + * + * Return: 0 for success and error value on failure + */ +static int xudc_ep_set_halt(struct usb_ep *_ep, int value) +{ + struct xusb_ep *ep = to_xusb_ep(_ep); + struct xusb_udc *udc; + unsigned long flags; + u32 epcfgreg; + + if (!_ep || (!ep->desc && ep->epnumber)) { + pr_debug("%s: bad ep or descriptor\n", __func__); + return -EINVAL; + } + udc = ep->udc; + + if (ep->is_in && (!list_empty(&ep->queue)) && value) { + dev_dbg(udc->dev, "requests pending can't halt\n"); + return -EAGAIN; + } + + if (ep->buffer0ready || ep->buffer1ready) { + dev_dbg(udc->dev, "HW buffers busy can't halt\n"); + return -EAGAIN; + } + + spin_lock_irqsave(&udc->lock, flags); + + if (value) { + /* Stall the device.*/ + epcfgreg = udc->read_fn(udc->addr + ep->offset); + epcfgreg |= XUSB_EP_CFG_STALL_MASK; + udc->write_fn(udc->addr, ep->offset, epcfgreg); + } else { + /* Unstall the device.*/ + epcfgreg = udc->read_fn(udc->addr + ep->offset); + epcfgreg &= ~XUSB_EP_CFG_STALL_MASK; + udc->write_fn(udc->addr, ep->offset, epcfgreg); + if (ep->epnumber) { + /* Reset the toggle bit.*/ + epcfgreg = udc->read_fn(ep->udc->addr + ep->offset); + epcfgreg &= ~XUSB_EP_CFG_DATA_TOGGLE_MASK; + udc->write_fn(udc->addr, ep->offset, epcfgreg); + } + } + + spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} + +/** + * __xudc_ep_enable - Enables the given endpoint. + * @ep: pointer to the xusb endpoint structure. + * @desc: pointer to usb endpoint descriptor. + * + * Return: 0 for success and error value on failure + */ +static int __xudc_ep_enable(struct xusb_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + struct xusb_udc *udc = ep->udc; + u32 tmp; + u32 epcfg; + u32 ier; + u16 maxpacket; + + ep->is_in = ((desc->bEndpointAddress & USB_DIR_IN) != 0); + /* Bit 3...0:endpoint number */ + ep->epnumber = (desc->bEndpointAddress & 0x0f); + ep->desc = desc; + ep->ep_usb.desc = desc; + tmp = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + ep->ep_usb.maxpacket = maxpacket = le16_to_cpu(desc->wMaxPacketSize); + + switch (tmp) { + case USB_ENDPOINT_XFER_CONTROL: + dev_dbg(udc->dev, "only one control endpoint\n"); + /* NON- ISO */ + ep->is_iso = 0; + return -EINVAL; + case USB_ENDPOINT_XFER_INT: + /* NON- ISO */ + ep->is_iso = 0; + if (maxpacket > 64) { + dev_dbg(udc->dev, "bogus maxpacket %d\n", maxpacket); + return -EINVAL; + } + break; + case USB_ENDPOINT_XFER_BULK: + /* NON- ISO */ + ep->is_iso = 0; + if (!(is_power_of_2(maxpacket) && maxpacket >= 8 && + maxpacket <= 512)) { + dev_dbg(udc->dev, "bogus maxpacket %d\n", maxpacket); + return -EINVAL; + } + break; + case USB_ENDPOINT_XFER_ISOC: + /* ISO */ + ep->is_iso = 1; + break; + } + + ep->buffer0ready = false; + ep->buffer1ready = false; + ep->curbufnum = 0; + ep->rambase = rambase[ep->epnumber]; + xudc_epconfig(ep, udc); + + dev_dbg(udc->dev, "Enable Endpoint %d max pkt is %d\n", + ep->epnumber, maxpacket); + + /* Enable the End point.*/ + epcfg = udc->read_fn(udc->addr + ep->offset); + epcfg |= XUSB_EP_CFG_VALID_MASK; + udc->write_fn(udc->addr, ep->offset, epcfg); + if (ep->epnumber) + ep->rambase <<= 2; + + /* Enable buffer completion interrupts for endpoint */ + ier = udc->read_fn(udc->addr + XUSB_IER_OFFSET); + ier |= (XUSB_STATUS_INTR_BUFF_COMP_SHIFT_MASK << ep->epnumber); + udc->write_fn(udc->addr, XUSB_IER_OFFSET, ier); + + /* for OUT endpoint set buffers ready to receive */ + if (ep->epnumber && !ep->is_in) { + udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, + 1 << ep->epnumber); + ep->buffer0ready = true; + udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, + (1 << (ep->epnumber + + XUSB_STATUS_EP_BUFF2_SHIFT))); + ep->buffer1ready = true; + } + + return 0; +} + +/** + * xudc_ep_enable - Enables the given endpoint. + * @_ep: pointer to the usb endpoint structure. + * @desc: pointer to usb endpoint descriptor. + * + * Return: 0 for success and error value on failure + */ +static int xudc_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct xusb_ep *ep; + struct xusb_udc *udc; + unsigned long flags; + int ret; + + if (!_ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) { + pr_debug("%s: bad ep or descriptor\n", __func__); + return -EINVAL; + } + + ep = to_xusb_ep(_ep); + udc = ep->udc; + + if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) { + dev_dbg(udc->dev, "bogus device state\n"); + return -ESHUTDOWN; + } + + spin_lock_irqsave(&udc->lock, flags); + ret = __xudc_ep_enable(ep, desc); + spin_unlock_irqrestore(&udc->lock, flags); + + return ret; +} + +/** + * xudc_ep_disable - Disables the given endpoint. + * @_ep: pointer to the usb endpoint structure. + * + * Return: 0 for success and error value on failure + */ +static int xudc_ep_disable(struct usb_ep *_ep) +{ + struct xusb_ep *ep; + unsigned long flags; + u32 epcfg; + struct xusb_udc *udc; + + if (!_ep) { + pr_debug("%s: invalid ep\n", __func__); + return -EINVAL; + } + + ep = to_xusb_ep(_ep); + udc = ep->udc; + + spin_lock_irqsave(&udc->lock, flags); + + xudc_nuke(ep, -ESHUTDOWN); + + /* Restore the endpoint's pristine config */ + ep->desc = NULL; + ep->ep_usb.desc = NULL; + + dev_dbg(udc->dev, "USB Ep %d disable\n ", ep->epnumber); + /* Disable the endpoint.*/ + epcfg = udc->read_fn(udc->addr + ep->offset); + epcfg &= ~XUSB_EP_CFG_VALID_MASK; + udc->write_fn(udc->addr, ep->offset, epcfg); + + spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} + +/** + * xudc_ep_alloc_request - Initializes the request queue. + * @_ep: pointer to the usb endpoint structure. + * @gfp_flags: Flags related to the request call. + * + * Return: pointer to request structure on success and a NULL on failure. + */ +static struct usb_request *xudc_ep_alloc_request(struct usb_ep *_ep, + gfp_t gfp_flags) +{ + struct xusb_ep *ep = to_xusb_ep(_ep); + struct xusb_req *req; + + req = kzalloc(sizeof(*req), gfp_flags); + if (!req) + return NULL; + + req->ep = ep; + INIT_LIST_HEAD(&req->queue); + return &req->usb_req; +} + +/** + * xudc_free_request - Releases the request from queue. + * @_ep: pointer to the usb device endpoint structure. + * @_req: pointer to the usb request structure. + */ +static void xudc_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct xusb_req *req = to_xusb_req(_req); + + kfree(req); +} + +/** + * __xudc_ep0_queue - Adds the request to endpoint 0 queue. + * @ep0: pointer to the xusb endpoint 0 structure. + * @req: pointer to the xusb request structure. + * + * Return: 0 for success and error value on failure + */ +static int __xudc_ep0_queue(struct xusb_ep *ep0, struct xusb_req *req) +{ + struct xusb_udc *udc = ep0->udc; + u32 length; + u8 *corebuf; + + if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) { + dev_dbg(udc->dev, "%s, bogus device state\n", __func__); + return -EINVAL; + } + if (!list_empty(&ep0->queue)) { + dev_dbg(udc->dev, "%s:ep0 busy\n", __func__); + return -EBUSY; + } + + req->usb_req.status = -EINPROGRESS; + req->usb_req.actual = 0; + + list_add_tail(&req->queue, &ep0->queue); + + if (udc->setup.bRequestType & USB_DIR_IN) { + prefetch(req->usb_req.buf); + length = req->usb_req.length; + corebuf = (void __force *) ((ep0->rambase << 2) + + udc->addr); + length = req->usb_req.actual = min_t(u32, length, + EP0_MAX_PACKET); + memcpy_toio((void __iomem *)corebuf, req->usb_req.buf, length); + udc->write_fn(udc->addr, XUSB_EP_BUF0COUNT_OFFSET, length); + udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1); + } else { + if (udc->setup.wLength) { + /* Enable EP0 buffer to receive data */ + udc->write_fn(udc->addr, XUSB_EP_BUF0COUNT_OFFSET, 0); + udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1); + } else { + xudc_wrstatus(udc); + } + } + + return 0; +} + +/** + * xudc_ep0_queue - Adds the request to endpoint 0 queue. + * @_ep: pointer to the usb endpoint 0 structure. + * @_req: pointer to the usb request structure. + * @gfp_flags: Flags related to the request call. + * + * Return: 0 for success and error value on failure + */ +static int xudc_ep0_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t gfp_flags) +{ + struct xusb_req *req = to_xusb_req(_req); + struct xusb_ep *ep0 = to_xusb_ep(_ep); + struct xusb_udc *udc = ep0->udc; + unsigned long flags; + int ret; + + spin_lock_irqsave(&udc->lock, flags); + ret = __xudc_ep0_queue(ep0, req); + spin_unlock_irqrestore(&udc->lock, flags); + + return ret; +} + +/** + * xudc_ep_queue - Adds the request to endpoint queue. + * @_ep: pointer to the usb endpoint structure. + * @_req: pointer to the usb request structure. + * @gfp_flags: Flags related to the request call. + * + * Return: 0 for success and error value on failure + */ +static int xudc_ep_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t gfp_flags) +{ + struct xusb_req *req = to_xusb_req(_req); + struct xusb_ep *ep = to_xusb_ep(_ep); + struct xusb_udc *udc = ep->udc; + int ret; + unsigned long flags; + + if (!ep->desc) { + dev_dbg(udc->dev, "%s: queuing request to disabled %s\n", + __func__, ep->name); + return -ESHUTDOWN; + } + + if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) { + dev_dbg(udc->dev, "%s, bogus device state\n", __func__); + return -EINVAL; + } + + spin_lock_irqsave(&udc->lock, flags); + + _req->status = -EINPROGRESS; + _req->actual = 0; + + if (udc->dma_enabled) { + ret = usb_gadget_map_request(&udc->gadget, &req->usb_req, + ep->is_in); + if (ret) { + dev_dbg(udc->dev, "gadget_map failed ep%d\n", + ep->epnumber); + spin_unlock_irqrestore(&udc->lock, flags); + return -EAGAIN; + } + } + + if (list_empty(&ep->queue)) { + if (ep->is_in) { + dev_dbg(udc->dev, "xudc_write_fifo from ep_queue\n"); + if (!xudc_write_fifo(ep, req)) + req = NULL; + } else { + dev_dbg(udc->dev, "xudc_read_fifo from ep_queue\n"); + if (!xudc_read_fifo(ep, req)) + req = NULL; + } + } + + if (req != NULL) + list_add_tail(&req->queue, &ep->queue); + + spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} + +/** + * xudc_ep_dequeue - Removes the request from the queue. + * @_ep: pointer to the usb device endpoint structure. + * @_req: pointer to the usb request structure. + * + * Return: 0 for success and error value on failure + */ +static int xudc_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct xusb_ep *ep = to_xusb_ep(_ep); + struct xusb_req *req = NULL; + struct xusb_req *iter; + struct xusb_udc *udc = ep->udc; + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + /* Make sure it's actually queued on this endpoint */ + list_for_each_entry(iter, &ep->queue, queue) { + if (&iter->usb_req != _req) + continue; + req = iter; + break; + } + if (!req) { + spin_unlock_irqrestore(&udc->lock, flags); + return -EINVAL; + } + xudc_done(ep, req, -ECONNRESET); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +/** + * xudc_ep0_enable - Enables the given endpoint. + * @ep: pointer to the usb endpoint structure. + * @desc: pointer to usb endpoint descriptor. + * + * Return: error always. + * + * endpoint 0 enable should not be called by gadget layer. + */ +static int xudc_ep0_enable(struct usb_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + return -EINVAL; +} + +/** + * xudc_ep0_disable - Disables the given endpoint. + * @ep: pointer to the usb endpoint structure. + * + * Return: error always. + * + * endpoint 0 disable should not be called by gadget layer. + */ +static int xudc_ep0_disable(struct usb_ep *ep) +{ + return -EINVAL; +} + +static const struct usb_ep_ops xusb_ep0_ops = { + .enable = xudc_ep0_enable, + .disable = xudc_ep0_disable, + .alloc_request = xudc_ep_alloc_request, + .free_request = xudc_free_request, + .queue = xudc_ep0_queue, + .dequeue = xudc_ep_dequeue, + .set_halt = xudc_ep_set_halt, +}; + +static const struct usb_ep_ops xusb_ep_ops = { + .enable = xudc_ep_enable, + .disable = xudc_ep_disable, + .alloc_request = xudc_ep_alloc_request, + .free_request = xudc_free_request, + .queue = xudc_ep_queue, + .dequeue = xudc_ep_dequeue, + .set_halt = xudc_ep_set_halt, +}; + +/** + * xudc_get_frame - Reads the current usb frame number. + * @gadget: pointer to the usb gadget structure. + * + * Return: current frame number for success and error value on failure. + */ +static int xudc_get_frame(struct usb_gadget *gadget) +{ + struct xusb_udc *udc; + int frame; + + if (!gadget) + return -ENODEV; + + udc = to_udc(gadget); + frame = udc->read_fn(udc->addr + XUSB_FRAMENUM_OFFSET); + return frame; +} + +/** + * xudc_wakeup - Send remote wakeup signal to host + * @gadget: pointer to the usb gadget structure. + * + * Return: 0 on success and error on failure + */ +static int xudc_wakeup(struct usb_gadget *gadget) +{ + struct xusb_udc *udc = to_udc(gadget); + u32 crtlreg; + int status = -EINVAL; + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + + /* Remote wake up not enabled by host */ + if (!udc->remote_wkp) + goto done; + + crtlreg = udc->read_fn(udc->addr + XUSB_CONTROL_OFFSET); + crtlreg |= XUSB_CONTROL_USB_RMTWAKE_MASK; + /* set remote wake up bit */ + udc->write_fn(udc->addr, XUSB_CONTROL_OFFSET, crtlreg); + /* + * wait for a while and reset remote wake up bit since this bit + * is not cleared by HW after sending remote wakeup to host. + */ + mdelay(2); + + crtlreg &= ~XUSB_CONTROL_USB_RMTWAKE_MASK; + udc->write_fn(udc->addr, XUSB_CONTROL_OFFSET, crtlreg); + status = 0; +done: + spin_unlock_irqrestore(&udc->lock, flags); + return status; +} + +/** + * xudc_pullup - start/stop USB traffic + * @gadget: pointer to the usb gadget structure. + * @is_on: flag to start or stop + * + * Return: 0 always + * + * This function starts/stops SIE engine of IP based on is_on. + */ +static int xudc_pullup(struct usb_gadget *gadget, int is_on) +{ + struct xusb_udc *udc = to_udc(gadget); + unsigned long flags; + u32 crtlreg; + + spin_lock_irqsave(&udc->lock, flags); + + crtlreg = udc->read_fn(udc->addr + XUSB_CONTROL_OFFSET); + if (is_on) + crtlreg |= XUSB_CONTROL_USB_READY_MASK; + else + crtlreg &= ~XUSB_CONTROL_USB_READY_MASK; + + udc->write_fn(udc->addr, XUSB_CONTROL_OFFSET, crtlreg); + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +/** + * xudc_eps_init - initialize endpoints. + * @udc: pointer to the usb device controller structure. + */ +static void xudc_eps_init(struct xusb_udc *udc) +{ + u32 ep_number; + + INIT_LIST_HEAD(&udc->gadget.ep_list); + + for (ep_number = 0; ep_number < XUSB_MAX_ENDPOINTS; ep_number++) { + struct xusb_ep *ep = &udc->ep[ep_number]; + + if (ep_number) { + list_add_tail(&ep->ep_usb.ep_list, + &udc->gadget.ep_list); + usb_ep_set_maxpacket_limit(&ep->ep_usb, + (unsigned short) ~0); + snprintf(ep->name, EPNAME_SIZE, "ep%d", ep_number); + ep->ep_usb.name = ep->name; + ep->ep_usb.ops = &xusb_ep_ops; + + ep->ep_usb.caps.type_iso = true; + ep->ep_usb.caps.type_bulk = true; + ep->ep_usb.caps.type_int = true; + } else { + ep->ep_usb.name = ep0name; + usb_ep_set_maxpacket_limit(&ep->ep_usb, EP0_MAX_PACKET); + ep->ep_usb.ops = &xusb_ep0_ops; + + ep->ep_usb.caps.type_control = true; + } + + ep->ep_usb.caps.dir_in = true; + ep->ep_usb.caps.dir_out = true; + + ep->udc = udc; + ep->epnumber = ep_number; + ep->desc = NULL; + /* + * The configuration register address offset between + * each endpoint is 0x10. + */ + ep->offset = XUSB_EP0_CONFIG_OFFSET + (ep_number * 0x10); + ep->is_in = 0; + ep->is_iso = 0; + ep->maxpacket = 0; + xudc_epconfig(ep, udc); + + /* Initialize one queue per endpoint */ + INIT_LIST_HEAD(&ep->queue); + } +} + +/** + * xudc_stop_activity - Stops any further activity on the device. + * @udc: pointer to the usb device controller structure. + */ +static void xudc_stop_activity(struct xusb_udc *udc) +{ + int i; + struct xusb_ep *ep; + + for (i = 0; i < XUSB_MAX_ENDPOINTS; i++) { + ep = &udc->ep[i]; + xudc_nuke(ep, -ESHUTDOWN); + } +} + +/** + * xudc_start - Starts the device. + * @gadget: pointer to the usb gadget structure + * @driver: pointer to gadget driver structure + * + * Return: zero on success and error on failure + */ +static int xudc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct xusb_udc *udc = to_udc(gadget); + struct xusb_ep *ep0 = &udc->ep[XUSB_EP_NUMBER_ZERO]; + const struct usb_endpoint_descriptor *desc = &config_bulk_out_desc; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&udc->lock, flags); + + if (udc->driver) { + dev_err(udc->dev, "%s is already bound to %s\n", + udc->gadget.name, udc->driver->driver.name); + ret = -EBUSY; + goto err; + } + + /* hook up the driver */ + udc->driver = driver; + udc->gadget.speed = driver->max_speed; + + /* Enable the control endpoint. */ + ret = __xudc_ep_enable(ep0, desc); + + /* Set device address and remote wakeup to 0 */ + udc->write_fn(udc->addr, XUSB_ADDRESS_OFFSET, 0); + udc->remote_wkp = 0; +err: + spin_unlock_irqrestore(&udc->lock, flags); + return ret; +} + +/** + * xudc_stop - stops the device. + * @gadget: pointer to the usb gadget structure + * + * Return: zero always + */ +static int xudc_stop(struct usb_gadget *gadget) +{ + struct xusb_udc *udc = to_udc(gadget); + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + + udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->driver = NULL; + + /* Set device address and remote wakeup to 0 */ + udc->write_fn(udc->addr, XUSB_ADDRESS_OFFSET, 0); + udc->remote_wkp = 0; + + xudc_stop_activity(udc); + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static const struct usb_gadget_ops xusb_udc_ops = { + .get_frame = xudc_get_frame, + .wakeup = xudc_wakeup, + .pullup = xudc_pullup, + .udc_start = xudc_start, + .udc_stop = xudc_stop, +}; + +/** + * xudc_clear_stall_all_ep - clears stall of every endpoint. + * @udc: pointer to the udc structure. + */ +static void xudc_clear_stall_all_ep(struct xusb_udc *udc) +{ + struct xusb_ep *ep; + u32 epcfgreg; + int i; + + for (i = 0; i < XUSB_MAX_ENDPOINTS; i++) { + ep = &udc->ep[i]; + epcfgreg = udc->read_fn(udc->addr + ep->offset); + epcfgreg &= ~XUSB_EP_CFG_STALL_MASK; + udc->write_fn(udc->addr, ep->offset, epcfgreg); + if (ep->epnumber) { + /* Reset the toggle bit.*/ + epcfgreg = udc->read_fn(udc->addr + ep->offset); + epcfgreg &= ~XUSB_EP_CFG_DATA_TOGGLE_MASK; + udc->write_fn(udc->addr, ep->offset, epcfgreg); + } + } +} + +/** + * xudc_startup_handler - The usb device controller interrupt handler. + * @udc: pointer to the udc structure. + * @intrstatus: The mask value containing the interrupt sources. + * + * This function handles the RESET,SUSPEND,RESUME and DISCONNECT interrupts. + */ +static void xudc_startup_handler(struct xusb_udc *udc, u32 intrstatus) +{ + u32 intrreg; + + if (intrstatus & XUSB_STATUS_RESET_MASK) { + + dev_dbg(udc->dev, "Reset\n"); + + if (intrstatus & XUSB_STATUS_HIGH_SPEED_MASK) + udc->gadget.speed = USB_SPEED_HIGH; + else + udc->gadget.speed = USB_SPEED_FULL; + + xudc_stop_activity(udc); + xudc_clear_stall_all_ep(udc); + udc->write_fn(udc->addr, XUSB_TESTMODE_OFFSET, 0); + + /* Set device address and remote wakeup to 0 */ + udc->write_fn(udc->addr, XUSB_ADDRESS_OFFSET, 0); + udc->remote_wkp = 0; + + /* Enable the suspend, resume and disconnect */ + intrreg = udc->read_fn(udc->addr + XUSB_IER_OFFSET); + intrreg |= XUSB_STATUS_SUSPEND_MASK | XUSB_STATUS_RESUME_MASK | + XUSB_STATUS_DISCONNECT_MASK; + udc->write_fn(udc->addr, XUSB_IER_OFFSET, intrreg); + } + if (intrstatus & XUSB_STATUS_SUSPEND_MASK) { + + dev_dbg(udc->dev, "Suspend\n"); + + /* Enable the reset, resume and disconnect */ + intrreg = udc->read_fn(udc->addr + XUSB_IER_OFFSET); + intrreg |= XUSB_STATUS_RESET_MASK | XUSB_STATUS_RESUME_MASK | + XUSB_STATUS_DISCONNECT_MASK; + udc->write_fn(udc->addr, XUSB_IER_OFFSET, intrreg); + + udc->usb_state = USB_STATE_SUSPENDED; + + if (udc->driver->suspend) { + spin_unlock(&udc->lock); + udc->driver->suspend(&udc->gadget); + spin_lock(&udc->lock); + } + } + if (intrstatus & XUSB_STATUS_RESUME_MASK) { + bool condition = (udc->usb_state != USB_STATE_SUSPENDED); + + dev_WARN_ONCE(udc->dev, condition, + "Resume IRQ while not suspended\n"); + + dev_dbg(udc->dev, "Resume\n"); + + /* Enable the reset, suspend and disconnect */ + intrreg = udc->read_fn(udc->addr + XUSB_IER_OFFSET); + intrreg |= XUSB_STATUS_RESET_MASK | XUSB_STATUS_SUSPEND_MASK | + XUSB_STATUS_DISCONNECT_MASK; + udc->write_fn(udc->addr, XUSB_IER_OFFSET, intrreg); + + udc->usb_state = 0; + + if (udc->driver->resume) { + spin_unlock(&udc->lock); + udc->driver->resume(&udc->gadget); + spin_lock(&udc->lock); + } + } + if (intrstatus & XUSB_STATUS_DISCONNECT_MASK) { + + dev_dbg(udc->dev, "Disconnect\n"); + + /* Enable the reset, resume and suspend */ + intrreg = udc->read_fn(udc->addr + XUSB_IER_OFFSET); + intrreg |= XUSB_STATUS_RESET_MASK | XUSB_STATUS_RESUME_MASK | + XUSB_STATUS_SUSPEND_MASK; + udc->write_fn(udc->addr, XUSB_IER_OFFSET, intrreg); + + if (udc->driver && udc->driver->disconnect) { + spin_unlock(&udc->lock); + udc->driver->disconnect(&udc->gadget); + spin_lock(&udc->lock); + } + } +} + +/** + * xudc_ep0_stall - Stall endpoint zero. + * @udc: pointer to the udc structure. + * + * This function stalls endpoint zero. + */ +static void xudc_ep0_stall(struct xusb_udc *udc) +{ + u32 epcfgreg; + struct xusb_ep *ep0 = &udc->ep[XUSB_EP_NUMBER_ZERO]; + + epcfgreg = udc->read_fn(udc->addr + ep0->offset); + epcfgreg |= XUSB_EP_CFG_STALL_MASK; + udc->write_fn(udc->addr, ep0->offset, epcfgreg); +} + +/** + * xudc_setaddress - executes SET_ADDRESS command + * @udc: pointer to the udc structure. + * + * This function executes USB SET_ADDRESS command + */ +static void xudc_setaddress(struct xusb_udc *udc) +{ + struct xusb_ep *ep0 = &udc->ep[0]; + struct xusb_req *req = udc->req; + int ret; + + req->usb_req.length = 0; + ret = __xudc_ep0_queue(ep0, req); + if (ret == 0) + return; + + dev_err(udc->dev, "Can't respond to SET ADDRESS request\n"); + xudc_ep0_stall(udc); +} + +/** + * xudc_getstatus - executes GET_STATUS command + * @udc: pointer to the udc structure. + * + * This function executes USB GET_STATUS command + */ +static void xudc_getstatus(struct xusb_udc *udc) +{ + struct xusb_ep *ep0 = &udc->ep[0]; + struct xusb_req *req = udc->req; + struct xusb_ep *target_ep; + u16 status = 0; + u32 epcfgreg; + int epnum; + u32 halt; + int ret; + + switch (udc->setup.bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + /* Get device status */ + status = 1 << USB_DEVICE_SELF_POWERED; + if (udc->remote_wkp) + status |= (1 << USB_DEVICE_REMOTE_WAKEUP); + break; + case USB_RECIP_INTERFACE: + break; + case USB_RECIP_ENDPOINT: + epnum = udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK; + if (epnum >= XUSB_MAX_ENDPOINTS) + goto stall; + target_ep = &udc->ep[epnum]; + epcfgreg = udc->read_fn(udc->addr + target_ep->offset); + halt = epcfgreg & XUSB_EP_CFG_STALL_MASK; + if (udc->setup.wIndex & USB_DIR_IN) { + if (!target_ep->is_in) + goto stall; + } else { + if (target_ep->is_in) + goto stall; + } + if (halt) + status = 1 << USB_ENDPOINT_HALT; + break; + default: + goto stall; + } + + req->usb_req.length = 2; + *(u16 *)req->usb_req.buf = cpu_to_le16(status); + ret = __xudc_ep0_queue(ep0, req); + if (ret == 0) + return; +stall: + dev_err(udc->dev, "Can't respond to getstatus request\n"); + xudc_ep0_stall(udc); +} + +/** + * xudc_set_clear_feature - Executes the set feature and clear feature commands. + * @udc: pointer to the usb device controller structure. + * + * Processes the SET_FEATURE and CLEAR_FEATURE commands. + */ +static void xudc_set_clear_feature(struct xusb_udc *udc) +{ + struct xusb_ep *ep0 = &udc->ep[0]; + struct xusb_req *req = udc->req; + struct xusb_ep *target_ep; + u8 endpoint; + u8 outinbit; + u32 epcfgreg; + int flag = (udc->setup.bRequest == USB_REQ_SET_FEATURE ? 1 : 0); + int ret; + + switch (udc->setup.bRequestType) { + case USB_RECIP_DEVICE: + switch (udc->setup.wValue) { + case USB_DEVICE_TEST_MODE: + /* + * The Test Mode will be executed + * after the status phase. + */ + break; + case USB_DEVICE_REMOTE_WAKEUP: + if (flag) + udc->remote_wkp = 1; + else + udc->remote_wkp = 0; + break; + default: + xudc_ep0_stall(udc); + break; + } + break; + case USB_RECIP_ENDPOINT: + if (!udc->setup.wValue) { + endpoint = udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK; + if (endpoint >= XUSB_MAX_ENDPOINTS) { + xudc_ep0_stall(udc); + return; + } + target_ep = &udc->ep[endpoint]; + outinbit = udc->setup.wIndex & USB_ENDPOINT_DIR_MASK; + outinbit = outinbit >> 7; + + /* Make sure direction matches.*/ + if (outinbit != target_ep->is_in) { + xudc_ep0_stall(udc); + return; + } + epcfgreg = udc->read_fn(udc->addr + target_ep->offset); + if (!endpoint) { + /* Clear the stall.*/ + epcfgreg &= ~XUSB_EP_CFG_STALL_MASK; + udc->write_fn(udc->addr, + target_ep->offset, epcfgreg); + } else { + if (flag) { + epcfgreg |= XUSB_EP_CFG_STALL_MASK; + udc->write_fn(udc->addr, + target_ep->offset, + epcfgreg); + } else { + /* Unstall the endpoint.*/ + epcfgreg &= ~(XUSB_EP_CFG_STALL_MASK | + XUSB_EP_CFG_DATA_TOGGLE_MASK); + udc->write_fn(udc->addr, + target_ep->offset, + epcfgreg); + } + } + } + break; + default: + xudc_ep0_stall(udc); + return; + } + + req->usb_req.length = 0; + ret = __xudc_ep0_queue(ep0, req); + if (ret == 0) + return; + + dev_err(udc->dev, "Can't respond to SET/CLEAR FEATURE\n"); + xudc_ep0_stall(udc); +} + +/** + * xudc_handle_setup - Processes the setup packet. + * @udc: pointer to the usb device controller structure. + * + * Process setup packet and delegate to gadget layer. + */ +static void xudc_handle_setup(struct xusb_udc *udc) + __must_hold(&udc->lock) +{ + struct xusb_ep *ep0 = &udc->ep[0]; + struct usb_ctrlrequest setup; + u32 *ep0rambase; + + /* Load up the chapter 9 command buffer.*/ + ep0rambase = (u32 __force *) (udc->addr + XUSB_SETUP_PKT_ADDR_OFFSET); + memcpy_toio((void __iomem *)&setup, ep0rambase, 8); + + udc->setup = setup; + udc->setup.wValue = cpu_to_le16(setup.wValue); + udc->setup.wIndex = cpu_to_le16(setup.wIndex); + udc->setup.wLength = cpu_to_le16(setup.wLength); + + /* Clear previous requests */ + xudc_nuke(ep0, -ECONNRESET); + + if (udc->setup.bRequestType & USB_DIR_IN) { + /* Execute the get command.*/ + udc->setupseqrx = STATUS_PHASE; + udc->setupseqtx = DATA_PHASE; + } else { + /* Execute the put command.*/ + udc->setupseqrx = DATA_PHASE; + udc->setupseqtx = STATUS_PHASE; + } + + switch (udc->setup.bRequest) { + case USB_REQ_GET_STATUS: + /* Data+Status phase form udc */ + if ((udc->setup.bRequestType & + (USB_DIR_IN | USB_TYPE_MASK)) != + (USB_DIR_IN | USB_TYPE_STANDARD)) + break; + xudc_getstatus(udc); + return; + case USB_REQ_SET_ADDRESS: + /* Status phase from udc */ + if (udc->setup.bRequestType != (USB_DIR_OUT | + USB_TYPE_STANDARD | USB_RECIP_DEVICE)) + break; + xudc_setaddress(udc); + return; + case USB_REQ_CLEAR_FEATURE: + case USB_REQ_SET_FEATURE: + /* Requests with no data phase, status phase from udc */ + if ((udc->setup.bRequestType & USB_TYPE_MASK) + != USB_TYPE_STANDARD) + break; + xudc_set_clear_feature(udc); + return; + default: + break; + } + + spin_unlock(&udc->lock); + if (udc->driver->setup(&udc->gadget, &setup) < 0) + xudc_ep0_stall(udc); + spin_lock(&udc->lock); +} + +/** + * xudc_ep0_out - Processes the endpoint 0 OUT token. + * @udc: pointer to the usb device controller structure. + */ +static void xudc_ep0_out(struct xusb_udc *udc) +{ + struct xusb_ep *ep0 = &udc->ep[0]; + struct xusb_req *req; + u8 *ep0rambase; + unsigned int bytes_to_rx; + void *buffer; + + req = list_first_entry(&ep0->queue, struct xusb_req, queue); + + switch (udc->setupseqrx) { + case STATUS_PHASE: + /* + * This resets both state machines for the next + * Setup packet. + */ + udc->setupseqrx = SETUP_PHASE; + udc->setupseqtx = SETUP_PHASE; + req->usb_req.actual = req->usb_req.length; + xudc_done(ep0, req, 0); + break; + case DATA_PHASE: + bytes_to_rx = udc->read_fn(udc->addr + + XUSB_EP_BUF0COUNT_OFFSET); + /* Copy the data to be received from the DPRAM. */ + ep0rambase = (u8 __force *) (udc->addr + + (ep0->rambase << 2)); + buffer = req->usb_req.buf + req->usb_req.actual; + req->usb_req.actual = req->usb_req.actual + bytes_to_rx; + memcpy_toio((void __iomem *)buffer, ep0rambase, bytes_to_rx); + + if (req->usb_req.length == req->usb_req.actual) { + /* Data transfer completed get ready for Status stage */ + xudc_wrstatus(udc); + } else { + /* Enable EP0 buffer to receive data */ + udc->write_fn(udc->addr, XUSB_EP_BUF0COUNT_OFFSET, 0); + udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1); + } + break; + default: + break; + } +} + +/** + * xudc_ep0_in - Processes the endpoint 0 IN token. + * @udc: pointer to the usb device controller structure. + */ +static void xudc_ep0_in(struct xusb_udc *udc) +{ + struct xusb_ep *ep0 = &udc->ep[0]; + struct xusb_req *req; + unsigned int bytes_to_tx; + void *buffer; + u32 epcfgreg; + u16 count = 0; + u16 length; + u8 *ep0rambase; + u8 test_mode = udc->setup.wIndex >> 8; + + req = list_first_entry(&ep0->queue, struct xusb_req, queue); + bytes_to_tx = req->usb_req.length - req->usb_req.actual; + + switch (udc->setupseqtx) { + case STATUS_PHASE: + switch (udc->setup.bRequest) { + case USB_REQ_SET_ADDRESS: + /* Set the address of the device.*/ + udc->write_fn(udc->addr, XUSB_ADDRESS_OFFSET, + udc->setup.wValue); + break; + case USB_REQ_SET_FEATURE: + if (udc->setup.bRequestType == + USB_RECIP_DEVICE) { + if (udc->setup.wValue == + USB_DEVICE_TEST_MODE) + udc->write_fn(udc->addr, + XUSB_TESTMODE_OFFSET, + test_mode); + } + break; + } + req->usb_req.actual = req->usb_req.length; + xudc_done(ep0, req, 0); + break; + case DATA_PHASE: + if (!bytes_to_tx) { + /* + * We're done with data transfer, next + * will be zero length OUT with data toggle of + * 1. Setup data_toggle. + */ + epcfgreg = udc->read_fn(udc->addr + ep0->offset); + epcfgreg |= XUSB_EP_CFG_DATA_TOGGLE_MASK; + udc->write_fn(udc->addr, ep0->offset, epcfgreg); + udc->setupseqtx = STATUS_PHASE; + } else { + length = count = min_t(u32, bytes_to_tx, + EP0_MAX_PACKET); + /* Copy the data to be transmitted into the DPRAM. */ + ep0rambase = (u8 __force *) (udc->addr + + (ep0->rambase << 2)); + buffer = req->usb_req.buf + req->usb_req.actual; + req->usb_req.actual = req->usb_req.actual + length; + memcpy_toio((void __iomem *)ep0rambase, buffer, length); + } + udc->write_fn(udc->addr, XUSB_EP_BUF0COUNT_OFFSET, count); + udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1); + break; + default: + break; + } +} + +/** + * xudc_ctrl_ep_handler - Endpoint 0 interrupt handler. + * @udc: pointer to the udc structure. + * @intrstatus: It's the mask value for the interrupt sources on endpoint 0. + * + * Processes the commands received during enumeration phase. + */ +static void xudc_ctrl_ep_handler(struct xusb_udc *udc, u32 intrstatus) +{ + + if (intrstatus & XUSB_STATUS_SETUP_PACKET_MASK) { + xudc_handle_setup(udc); + } else { + if (intrstatus & XUSB_STATUS_FIFO_BUFF_RDY_MASK) + xudc_ep0_out(udc); + else if (intrstatus & XUSB_STATUS_FIFO_BUFF_FREE_MASK) + xudc_ep0_in(udc); + } +} + +/** + * xudc_nonctrl_ep_handler - Non control endpoint interrupt handler. + * @udc: pointer to the udc structure. + * @epnum: End point number for which the interrupt is to be processed + * @intrstatus: mask value for interrupt sources of endpoints other + * than endpoint 0. + * + * Processes the buffer completion interrupts. + */ +static void xudc_nonctrl_ep_handler(struct xusb_udc *udc, u8 epnum, + u32 intrstatus) +{ + + struct xusb_req *req; + struct xusb_ep *ep; + + ep = &udc->ep[epnum]; + /* Process the End point interrupts.*/ + if (intrstatus & (XUSB_STATUS_EP0_BUFF1_COMP_MASK << epnum)) + ep->buffer0ready = 0; + if (intrstatus & (XUSB_STATUS_EP0_BUFF2_COMP_MASK << epnum)) + ep->buffer1ready = false; + + if (list_empty(&ep->queue)) + return; + + req = list_first_entry(&ep->queue, struct xusb_req, queue); + + if (ep->is_in) + xudc_write_fifo(ep, req); + else + xudc_read_fifo(ep, req); +} + +/** + * xudc_irq - The main interrupt handler. + * @irq: The interrupt number. + * @_udc: pointer to the usb device controller structure. + * + * Return: IRQ_HANDLED after the interrupt is handled. + */ +static irqreturn_t xudc_irq(int irq, void *_udc) +{ + struct xusb_udc *udc = _udc; + u32 intrstatus; + u32 ier; + u8 index; + u32 bufintr; + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + + /* + * Event interrupts are level sensitive hence first disable + * IER, read ISR and figure out active interrupts. + */ + ier = udc->read_fn(udc->addr + XUSB_IER_OFFSET); + ier &= ~XUSB_STATUS_INTR_EVENT_MASK; + udc->write_fn(udc->addr, XUSB_IER_OFFSET, ier); + + /* Read the Interrupt Status Register.*/ + intrstatus = udc->read_fn(udc->addr + XUSB_STATUS_OFFSET); + + /* Call the handler for the event interrupt.*/ + if (intrstatus & XUSB_STATUS_INTR_EVENT_MASK) { + /* + * Check if there is any action to be done for : + * - USB Reset received {XUSB_STATUS_RESET_MASK} + * - USB Suspend received {XUSB_STATUS_SUSPEND_MASK} + * - USB Resume received {XUSB_STATUS_RESUME_MASK} + * - USB Disconnect received {XUSB_STATUS_DISCONNECT_MASK} + */ + xudc_startup_handler(udc, intrstatus); + } + + /* Check the buffer completion interrupts */ + if (intrstatus & XUSB_STATUS_INTR_BUFF_COMP_ALL_MASK) { + /* Enable Reset, Suspend, Resume and Disconnect */ + ier = udc->read_fn(udc->addr + XUSB_IER_OFFSET); + ier |= XUSB_STATUS_INTR_EVENT_MASK; + udc->write_fn(udc->addr, XUSB_IER_OFFSET, ier); + + if (intrstatus & XUSB_STATUS_EP0_BUFF1_COMP_MASK) + xudc_ctrl_ep_handler(udc, intrstatus); + + for (index = 1; index < 8; index++) { + bufintr = ((intrstatus & + (XUSB_STATUS_EP1_BUFF1_COMP_MASK << + (index - 1))) || (intrstatus & + (XUSB_STATUS_EP1_BUFF2_COMP_MASK << + (index - 1)))); + if (bufintr) { + xudc_nonctrl_ep_handler(udc, index, + intrstatus); + } + } + } + + spin_unlock_irqrestore(&udc->lock, flags); + return IRQ_HANDLED; +} + +/** + * xudc_probe - The device probe function for driver initialization. + * @pdev: pointer to the platform device structure. + * + * Return: 0 for success and error value on failure + */ +static int xudc_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct resource *res; + struct xusb_udc *udc; + int irq; + int ret; + u32 ier; + u8 *buff; + + udc = devm_kzalloc(&pdev->dev, sizeof(*udc), GFP_KERNEL); + if (!udc) + return -ENOMEM; + + /* Create a dummy request for GET_STATUS, SET_ADDRESS */ + udc->req = devm_kzalloc(&pdev->dev, sizeof(struct xusb_req), + GFP_KERNEL); + if (!udc->req) + return -ENOMEM; + + buff = devm_kzalloc(&pdev->dev, STATUSBUFF_SIZE, GFP_KERNEL); + if (!buff) + return -ENOMEM; + + udc->req->usb_req.buf = buff; + + /* Map the registers */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + udc->addr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(udc->addr)) + return PTR_ERR(udc->addr); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + ret = devm_request_irq(&pdev->dev, irq, xudc_irq, 0, + dev_name(&pdev->dev), udc); + if (ret < 0) { + dev_dbg(&pdev->dev, "unable to request irq %d", irq); + goto fail; + } + + udc->dma_enabled = of_property_read_bool(np, "xlnx,has-builtin-dma"); + + /* Setup gadget structure */ + udc->gadget.ops = &xusb_udc_ops; + udc->gadget.max_speed = USB_SPEED_HIGH; + udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->gadget.ep0 = &udc->ep[XUSB_EP_NUMBER_ZERO].ep_usb; + udc->gadget.name = driver_name; + + udc->clk = devm_clk_get(&pdev->dev, "s_axi_aclk"); + if (IS_ERR(udc->clk)) { + if (PTR_ERR(udc->clk) != -ENOENT) { + ret = PTR_ERR(udc->clk); + goto fail; + } + + /* + * Clock framework support is optional, continue on, + * anyways if we don't find a matching clock + */ + dev_warn(&pdev->dev, "s_axi_aclk clock property is not found\n"); + udc->clk = NULL; + } + + ret = clk_prepare_enable(udc->clk); + if (ret) { + dev_err(&pdev->dev, "Unable to enable clock.\n"); + return ret; + } + + spin_lock_init(&udc->lock); + + /* Check for IP endianness */ + udc->write_fn = xudc_write32_be; + udc->read_fn = xudc_read32_be; + udc->write_fn(udc->addr, XUSB_TESTMODE_OFFSET, USB_TEST_J); + if ((udc->read_fn(udc->addr + XUSB_TESTMODE_OFFSET)) + != USB_TEST_J) { + udc->write_fn = xudc_write32; + udc->read_fn = xudc_read32; + } + udc->write_fn(udc->addr, XUSB_TESTMODE_OFFSET, 0); + + xudc_eps_init(udc); + + /* Set device address to 0.*/ + udc->write_fn(udc->addr, XUSB_ADDRESS_OFFSET, 0); + + ret = usb_add_gadget_udc(&pdev->dev, &udc->gadget); + if (ret) + goto err_disable_unprepare_clk; + + udc->dev = &udc->gadget.dev; + + /* Enable the interrupts.*/ + ier = XUSB_STATUS_GLOBAL_INTR_MASK | XUSB_STATUS_INTR_EVENT_MASK | + XUSB_STATUS_FIFO_BUFF_RDY_MASK | XUSB_STATUS_FIFO_BUFF_FREE_MASK | + XUSB_STATUS_SETUP_PACKET_MASK | + XUSB_STATUS_INTR_BUFF_COMP_ALL_MASK; + + udc->write_fn(udc->addr, XUSB_IER_OFFSET, ier); + + platform_set_drvdata(pdev, udc); + + dev_vdbg(&pdev->dev, "%s at 0x%08X mapped to %p %s\n", + driver_name, (u32)res->start, udc->addr, + udc->dma_enabled ? "with DMA" : "without DMA"); + + return 0; + +err_disable_unprepare_clk: + clk_disable_unprepare(udc->clk); +fail: + dev_err(&pdev->dev, "probe failed, %d\n", ret); + return ret; +} + +/** + * xudc_remove - Releases the resources allocated during the initialization. + * @pdev: pointer to the platform device structure. + * + * Return: 0 always + */ +static int xudc_remove(struct platform_device *pdev) +{ + struct xusb_udc *udc = platform_get_drvdata(pdev); + + usb_del_gadget_udc(&udc->gadget); + clk_disable_unprepare(udc->clk); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int xudc_suspend(struct device *dev) +{ + struct xusb_udc *udc; + u32 crtlreg; + unsigned long flags; + + udc = dev_get_drvdata(dev); + + spin_lock_irqsave(&udc->lock, flags); + + crtlreg = udc->read_fn(udc->addr + XUSB_CONTROL_OFFSET); + crtlreg &= ~XUSB_CONTROL_USB_READY_MASK; + + udc->write_fn(udc->addr, XUSB_CONTROL_OFFSET, crtlreg); + + spin_unlock_irqrestore(&udc->lock, flags); + if (udc->driver && udc->driver->suspend) + udc->driver->suspend(&udc->gadget); + + clk_disable(udc->clk); + + return 0; +} + +static int xudc_resume(struct device *dev) +{ + struct xusb_udc *udc; + u32 crtlreg; + unsigned long flags; + int ret; + + udc = dev_get_drvdata(dev); + + ret = clk_enable(udc->clk); + if (ret < 0) + return ret; + + spin_lock_irqsave(&udc->lock, flags); + + crtlreg = udc->read_fn(udc->addr + XUSB_CONTROL_OFFSET); + crtlreg |= XUSB_CONTROL_USB_READY_MASK; + + udc->write_fn(udc->addr, XUSB_CONTROL_OFFSET, crtlreg); + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +static const struct dev_pm_ops xudc_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(xudc_suspend, xudc_resume) +}; + +/* Match table for of_platform binding */ +static const struct of_device_id usb_of_match[] = { + { .compatible = "xlnx,usb2-device-4.00.a", }, + { /* end of list */ }, +}; +MODULE_DEVICE_TABLE(of, usb_of_match); + +static struct platform_driver xudc_driver = { + .driver = { + .name = driver_name, + .of_match_table = usb_of_match, + .pm = &xudc_pm_ops, + }, + .probe = xudc_probe, + .remove = xudc_remove, +}; + +module_platform_driver(xudc_driver); + +MODULE_DESCRIPTION("Xilinx udc driver"); +MODULE_AUTHOR("Xilinx, Inc"); +MODULE_LICENSE("GPL"); |